diff options
Diffstat (limited to 'arch/arm/dts/stm32mp157c-phycore-stm32mp15-som.dtsi')
| -rw-r--r-- | arch/arm/dts/stm32mp157c-phycore-stm32mp15-som.dtsi | 271 |
1 files changed, 0 insertions, 271 deletions
diff --git a/arch/arm/dts/stm32mp157c-phycore-stm32mp15-som.dtsi b/arch/arm/dts/stm32mp157c-phycore-stm32mp15-som.dtsi deleted file mode 100644 index a40e59ae2e..0000000000 --- a/arch/arm/dts/stm32mp157c-phycore-stm32mp15-som.dtsi +++ /dev/null @@ -1,271 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) -/* - * Copyright (C) Phytec GmbH 2019-2020 - All Rights Reserved - * Author: Dom VOVARD <dom.vovard@linrt.com>. - */ - -#include "stm32mp157c-phycore-stm32mp15-pinctrl.dtsi" -#include <dt-bindings/net/ti-dp83867.h> -#include "stm32mp151.dtsi" - -/ { - chosen { - stdout-path = "serial0:115200n8"; - }; - - aliases { - serial0 = &uart4; - serial1 = &usart3; - }; - - vin: vin { - compatible = "regulator-fixed"; - regulator-name = "vin"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - - pwr_irq: pwr@50001020 { - compatible = "st,stm32mp1-pwr"; - reg = <0x50001020 0x100>; - }; -}; - -&bsec { - board_id: board_id@ec { - reg = <0xec 0x4>; - st,non-secure-otp; - }; -}; - -&clk_hse { - st,digbypass; -}; - -&cpu0 { - cpu-supply = <&vddcore>; -}; - -&cpu1 { - cpu-supply = <&vddcore>; -}; - -ðernet0 { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <ðernet0_rgmii_pins_a>; - pinctrl-1 = <ðernet0_rgmii_sleep_pins_a>; - phy-mode = "rgmii-id"; - phy-handle = <ðphy>; - max-speed = <1000>; - st,eth-clk-sel; - status = "okay"; - - mdio0 { - compatible = "snps,dwmac-mdio"; - #address-cells = <1>; - #size-cells = <0>; - - ethphy: ethernet-phy@1 { - reg = <1>; - }; - }; -}; - -&i2c4 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c4_pins_a>; - i2c-scl-rising-time-ns = <185>; - i2c-scl-falling-time-ns = <20>; - - pmic: stpmic@33 { - compatible = "st,stpmic1"; - reg = <0x33>; - - regulators { - compatible = "st,stpmic1-regulators"; - buck1-supply = <&vin>; - buck2-supply = <&vin>; - buck3-supply = <&vin>; - buck4-supply = <&vin>; - ldo1-supply = <&v3v3>; - ldo2-supply = <&v3v3>; - ldo3-supply = <&vdd_ddr>; - ldo4-supply = <&vin>; - ldo5-supply = <&v3v3>; - ldo6-supply = <&v3v3>; - vref_ddr-supply = <&vin>; - boost-supply = <&vin>; - pwr_sw1-supply = <&bst_out>; - pwr_sw2-supply = <&bst_out>; - - vddcore: buck1 { - regulator-name = "vddcore"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-initial-mode = <0>; - regulator-over-current-protection; - }; - - vdd_ddr: buck2 { - regulator-name = "vdd_ddr"; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-initial-mode = <0>; - regulator-over-current-protection; - }; - - vdd: buck3 { - regulator-name = "vdd"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - st,mask-reset; - regulator-initial-mode = <0>; - regulator-over-current-protection; - }; - - v3v3: buck4 { - regulator-name = "v3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-over-current-protection; - regulator-initial-mode = <0>; - }; - - v1v8_audio: ldo1 { - regulator-name = "v1v8_audio"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - vdd_eth_2v5: ldo2 { - regulator-name = "vdd_eth_2v5"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-always-on; - }; - - vtt_ddr: ldo3 { - regulator-name = "vtt_ddr"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <750000>; - regulator-always-on; - regulator-over-current-protection; - }; - - vdd_usb: ldo4 { - regulator-name = "vdd_usb"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vdda: ldo5 { - regulator-name = "vdda"; - regulator-min-microvolt = <2900000>; - regulator-max-microvolt = <2900000>; - regulator-boot-on; - }; - - vdd_eth_1v0: ldo6 { - regulator-name = "vdd_eth_1v0"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - vref_ddr: vref_ddr { - regulator-name = "vref_ddr"; - regulator-always-on; - regulator-over-current-protection; - }; - - bst_out: boost { - regulator-name = "bst_out"; - }; - - vbus_otg: pwr_sw1 { - regulator-name = "vbus_otg"; - }; - - vbus_sw: pwr_sw2 { - regulator-name = "vbus_sw"; - regulator-active-discharge = <1>; - }; - }; - }; -}; - -&iwdg2 { - timeout-sec = <32>; - status = "okay"; -}; - -&pwr_regulators { - vdd-supply = <&vdd>; - vdd_3v3_usbfs-supply = <&vdd_usb>; -}; - -&rng1 { - status = "okay"; -}; - -&sdmmc1 { - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc1_b4_pins_a>; - disable-wp; - st,neg-edge; - bus-width = <4>; - vmmc-supply = <&v3v3>; - status = "disabled"; -}; - -&sdmmc2 { - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>; - non-removable; - no-sd; - no-sdio; - st,neg-edge; - bus-width = <8>; - vmmc-supply = <&v3v3>; - vqmmc-supply = <&v3v3>; - mmc-ddr-3_3v; - status = "disabled"; -}; - -&uart4 { - pinctrl-names = "default"; - pinctrl-0 = <&uart4_pins_a>; - status = "okay"; -}; - -&usart3 { - pinctrl-names = "default"; - pinctrl-0 = <&usart3_pins_a>; - status = "disabled"; -}; - -&usbotg_hs { - phys = <&usbphyc_port1 0>; - phy-names = "usb2-phy"; - usb-role-switch; - status = "okay"; -}; - -&usbphyc { - status = "okay"; -}; - -&usbphyc_port0 { - phy-supply = <&vdd_usb>; -}; - -&usbphyc_port1 { - phy-supply = <&vdd_usb>; -}; |