summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/arm/l2c2x0.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/arm/l2c2x0.yaml')
-rw-r--r--dts/Bindings/arm/l2c2x0.yaml248
1 files changed, 248 insertions, 0 deletions
diff --git a/dts/Bindings/arm/l2c2x0.yaml b/dts/Bindings/arm/l2c2x0.yaml
new file mode 100644
index 0000000..bfc5c18
--- /dev/null
+++ b/dts/Bindings/arm/l2c2x0.yaml
@@ -0,0 +1,248 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/l2c2x0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM L2 Cache Controller
+
+maintainers:
+ - Rob Herring <robh@kernel.org>
+
+description: |+
+ ARM cores often have a separate L2C210/L2C220/L2C310 (also known as PL210/
+ PL220/PL310 and variants) based level 2 cache controller. All these various
+ implementations of the L2 cache controller have compatible programming
+ models (Note 1). Some of the properties that are just prefixed "cache-*" are
+ taken from section 3.7.3 of the Devicetree Specification which can be found
+ at:
+ https://www.devicetree.org/specifications/
+
+ Note 1: The description in this document doesn't apply to integrated L2
+ cache controllers as found in e.g. Cortex-A15/A7/A57/A53. These
+ integrated L2 controllers are assumed to be all preconfigured by
+ early secure boot code. Thus no need to deal with their configuration
+ in the kernel at all.
+
+allOf:
+ - $ref: /schemas/cache-controller.yaml#
+
+properties:
+ compatible:
+ enum:
+ - arm,pl310-cache
+ - arm,l220-cache
+ - arm,l210-cache
+ # DEPRECATED by "brcm,bcm11351-a2-pl310-cache"
+ - bcm,bcm11351-a2-pl310-cache
+ # For Broadcom bcm11351 chipset where an
+ # offset needs to be added to the address before passing down to the L2
+ # cache controller
+ - brcm,bcm11351-a2-pl310-cache
+ # Marvell Controller designed to be
+ # compatible with the ARM one, with system cache mode (meaning
+ # maintenance operations on L1 are broadcasted to the L2 and L2
+ # performs the same operation).
+ - marvell,aurora-system-cache
+ # Marvell Controller designed to be
+ # compatible with the ARM one with outer cache mode.
+ - marvell,aurora-outer-cache
+ # Marvell Tauros3 cache controller, compatible
+ # with arm,pl310-cache controller.
+ - marvell,tauros3-cache
+
+ cache-level:
+ const: 2
+
+ cache-unified: true
+ cache-size: true
+ cache-sets: true
+ cache-block-size: true
+ cache-line-size: true
+
+ reg:
+ maxItems: 1
+
+ arm,data-latency:
+ description: Cycles of latency for Data RAM accesses. Specifies 3 cells of
+ read, write and setup latencies. Minimum valid values are 1. Controllers
+ without setup latency control should use a value of 0.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32-array
+ - minItems: 2
+ maxItems: 3
+ items:
+ minimum: 0
+ maximum: 8
+
+ arm,tag-latency:
+ description: Cycles of latency for Tag RAM accesses. Specifies 3 cells of
+ read, write and setup latencies. Controllers without setup latency control
+ should use 0. Controllers without separate read and write Tag RAM latency
+ values should only use the first cell.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32-array
+ - minItems: 1
+ maxItems: 3
+ items:
+ minimum: 0
+ maximum: 8
+
+ arm,dirty-latency:
+ description: Cycles of latency for Dirty RAMs. This is a single cell.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - minimum: 1
+ maximum: 8
+
+ arm,filter-ranges:
+ description: <start length> Starting address and length of window to
+ filter. Addresses in the filter window are directed to the M1 port. Other
+ addresses will go to the M0 port.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32-array
+ - items:
+ minItems: 2
+ maxItems: 2
+
+ arm,io-coherent:
+ description: indicates that the system is operating in an hardware
+ I/O coherent mode. Valid only when the arm,pl310-cache compatible
+ string is used.
+ type: boolean
+
+ interrupts:
+ # Either a single combined interrupt or up to 9 individual interrupts
+ minItems: 1
+ maxItems: 9
+
+ cache-id-part:
+ description: cache id part number to be used if it is not present
+ on hardware
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ wt-override:
+ description: If present then L2 is forced to Write through mode
+ type: boolean
+
+ arm,double-linefill:
+ description: Override double linefill enable setting. Enable if
+ non-zero, disable if zero.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [ 0, 1 ]
+
+ arm,double-linefill-incr:
+ description: Override double linefill on INCR read. Enable
+ if non-zero, disable if zero.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [ 0, 1 ]
+
+ arm,double-linefill-wrap:
+ description: Override double linefill on WRAP read. Enable
+ if non-zero, disable if zero.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [ 0, 1 ]
+
+ arm,prefetch-drop:
+ description: Override prefetch drop enable setting. Enable if non-zero,
+ disable if zero.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [ 0, 1 ]
+
+ arm,prefetch-offset:
+ description: Override prefetch offset value.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [ 0, 1, 2, 3, 4, 5, 6, 7, 15, 23, 31 ]
+
+ arm,shared-override:
+ description: The default behavior of the L220 or PL310 cache
+ controllers with respect to the shareable attribute is to transform "normal
+ memory non-cacheable transactions" into "cacheable no allocate" (for reads)
+ or "write through no write allocate" (for writes).
+ On systems where this may cause DMA buffer corruption, this property must
+ be specified to indicate that such transforms are precluded.
+ type: boolean
+
+ arm,parity-enable:
+ description: enable parity checking on the L2 cache (L220 or PL310).
+ type: boolean
+
+ arm,parity-disable:
+ description: disable parity checking on the L2 cache (L220 or PL310).
+ type: boolean
+
+ arm,outer-sync-disable:
+ description: disable the outer sync operation on the L2 cache.
+ Some core tiles, especially ARM PB11MPCore have a faulty L220 cache that
+ will randomly hang unless outer sync operations are disabled.
+ type: boolean
+
+ prefetch-data:
+ description: |
+ Data prefetch. Value: <0> (forcibly disable), <1>
+ (forcibly enable), property absent (retain settings set by firmware)
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [ 0, 1 ]
+
+ prefetch-instr:
+ description: |
+ Instruction prefetch. Value: <0> (forcibly disable),
+ <1> (forcibly enable), property absent (retain settings set by
+ firmware)
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [ 0, 1 ]
+
+ arm,dynamic-clock-gating:
+ description: |
+ L2 dynamic clock gating. Value: <0> (forcibly
+ disable), <1> (forcibly enable), property absent (OS specific behavior,
+ preferably retain firmware settings)
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [ 0, 1 ]
+
+ arm,standby-mode:
+ description: L2 standby mode enable. Value <0> (forcibly disable),
+ <1> (forcibly enable), property absent (OS specific behavior,
+ preferably retain firmware settings)
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [ 0, 1 ]
+
+ arm,early-bresp-disable:
+ description: Disable the CA9 optimization Early BRESP (PL310)
+ type: boolean
+
+ arm,full-line-zero-disable:
+ description: Disable the CA9 optimization Full line of zero
+ write (PL310)
+ type: boolean
+
+required:
+ - compatible
+ - cache-unified
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ cache-controller@fff12000 {
+ compatible = "arm,pl310-cache";
+ reg = <0xfff12000 0x1000>;
+ arm,data-latency = <1 1 1>;
+ arm,tag-latency = <2 2 2>;
+ arm,filter-ranges = <0x80000000 0x8000000>;
+ cache-unified;
+ cache-level = <2>;
+ interrupts = <45>;
+ };
+
+...