Diffstat (limited to 'dts/Bindings/arm/pmu.txt')
1 files changed, 0 insertions, 70 deletions
diff --git a/dts/Bindings/arm/pmu.txt b/dts/Bindings/arm/pmu.txt
deleted file mode 100644
@@ -1,70 +0,0 @@
-* ARM Performance Monitor Units
-ARM cores often have a PMU for counting cpu and cache events like cache misses
-and hits. The interface to the PMU is part of the ARM ARM. The ARM PMU
-representation in the device tree should be done as under:-
-- compatible : should be one of
-- interrupts : 1 combined interrupt or 1 per core. If the interrupt is a per-cpu
- interrupt (PPI) then 1 interrupt should be specified.
-- interrupt-affinity : When using SPIs, specifies a list of phandles to CPU
- nodes corresponding directly to the affinity of
- the SPIs listed in the interrupts property.
- When using a PPI, specifies a list of phandles to CPU
- nodes corresponding to the set of CPUs which have
- a PMU of this type signalling the PPI listed in the
- interrupts property, unless this is already specified
- by the PPI interrupt specifier itself (in which case
- the interrupt-affinity property shouldn't be present).
- This property should be present when there is more than
- a single SPI.
-- qcom,no-pc-write : Indicates that this PMU doesn't support the 0xc and 0xd
-- secure-reg-access : Indicates that the ARMv7 Secure Debug Enable Register
- (SDER) is accessible. This will cause the driver to do
- any setup required that is only possible in ARMv7 secure
- state. If not present the ARMv7 SDER will not be touched,
- which means the PMU may fail to operate unless external
- code (bootloader or security monitor) has performed the
- appropriate initialisation. Note that this property is
- not valid for non-ARMv7 CPUs or ARMv7 CPUs booting Linux
- in Non-secure state.
- compatible = "arm,cortex-a9-pmu";
- interrupts = <100 101>;