summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/arm/pmu.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/arm/pmu.yaml')
-rw-r--r--dts/Bindings/arm/pmu.yaml87
1 files changed, 87 insertions, 0 deletions
diff --git a/dts/Bindings/arm/pmu.yaml b/dts/Bindings/arm/pmu.yaml
new file mode 100644
index 0000000..52ae094
--- /dev/null
+++ b/dts/Bindings/arm/pmu.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/pmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Performance Monitor Units
+
+maintainers:
+ - Mark Rutland <mark.rutland@arm.com>
+ - Will Deacon <will.deacon@arm.com>
+
+description: |+
+ ARM cores often have a PMU for counting cpu and cache events like cache misses
+ and hits. The interface to the PMU is part of the ARM ARM. The ARM PMU
+ representation in the device tree should be done as under:-
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - apm,potenza-pmu
+ - arm,armv8-pmuv3
+ - arm,cortex-a73-pmu
+ - arm,cortex-a72-pmu
+ - arm,cortex-a57-pmu
+ - arm,cortex-a53-pmu
+ - arm,cortex-a35-pmu
+ - arm,cortex-a17-pmu
+ - arm,cortex-a15-pmu
+ - arm,cortex-a12-pmu
+ - arm,cortex-a9-pmu
+ - arm,cortex-a8-pmu
+ - arm,cortex-a7-pmu
+ - arm,cortex-a5-pmu
+ - arm,arm11mpcore-pmu
+ - arm,arm1176-pmu
+ - arm,arm1136-pmu
+ - brcm,vulcan-pmu
+ - cavium,thunder-pmu
+ - qcom,scorpion-pmu
+ - qcom,scorpion-mp-pmu
+ - qcom,krait-pmu
+
+ interrupts:
+ # Don't know how many CPUs, so no constraints to specify
+ description: 1 per-cpu interrupt (PPI) or 1 interrupt per core.
+
+ interrupt-affinity:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description:
+ When using SPIs, specifies a list of phandles to CPU
+ nodes corresponding directly to the affinity of
+ the SPIs listed in the interrupts property.
+
+ When using a PPI, specifies a list of phandles to CPU
+ nodes corresponding to the set of CPUs which have
+ a PMU of this type signalling the PPI listed in the
+ interrupts property, unless this is already specified
+ by the PPI interrupt specifier itself (in which case
+ the interrupt-affinity property shouldn't be present).
+
+ This property should be present when there is more than
+ a single SPI.
+
+ qcom,no-pc-write:
+ type: boolean
+ description:
+ Indicates that this PMU doesn't support the 0xc and 0xd events.
+
+ secure-reg-access:
+ type: boolean
+ description:
+ Indicates that the ARMv7 Secure Debug Enable Register
+ (SDER) is accessible. This will cause the driver to do
+ any setup required that is only possible in ARMv7 secure
+ state. If not present the ARMv7 SDER will not be touched,
+ which means the PMU may fail to operate unless external
+ code (bootloader or security monitor) has performed the
+ appropriate initialisation. Note that this property is
+ not valid for non-ARMv7 CPUs or ARMv7 CPUs booting Linux
+ in Non-secure state.
+
+required:
+ - compatible
+
+...