diff options
Diffstat (limited to 'dts/Bindings/display')
436 files changed, 33435 insertions, 7835 deletions
diff --git a/dts/Bindings/display/allwinner,sun4i-a10-display-backend.yaml b/dts/Bindings/display/allwinner,sun4i-a10-display-backend.yaml index 86057d5410..ba06d1857b 100644 --- a/dts/Bindings/display/allwinner,sun4i-a10-display-backend.yaml +++ b/dts/Bindings/display/allwinner,sun4i-a10-display-backend.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-display-backend.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Allwinner A10 Display Engine Backend Device Tree Bindings +title: Allwinner A10 Display Engine Backend maintainers: - Chen-Yu Tsai <wens@csie.org> @@ -26,14 +26,12 @@ properties: reg: minItems: 1 - maxItems: 2 items: - description: Display Backend registers - description: SAT registers reg-names: minItems: 1 - maxItems: 2 items: - const: be - const: sat @@ -43,7 +41,6 @@ properties: clocks: minItems: 3 - maxItems: 4 items: - description: The backend interface clock - description: The backend module clock @@ -52,7 +49,6 @@ properties: clock-names: minItems: 3 - maxItems: 4 items: - const: ahb - const: mod @@ -61,14 +57,12 @@ properties: resets: minItems: 1 - maxItems: 2 items: - description: The Backend reset line - description: The SAT reset line reset-names: minItems: 1 - maxItems: 2 items: - const: be - const: sat @@ -84,36 +78,23 @@ properties: const: dma-mem ports: - type: object - description: | - A ports node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. + $ref: /schemas/graph.yaml#/properties/ports properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - port@0: - type: object - description: | + $ref: /schemas/graph.yaml#/properties/port + description: Input endpoints of the controller. port@1: - type: object - description: | + $ref: /schemas/graph.yaml#/properties/port + description: Output endpoints of the controller. required: - - "#address-cells" - - "#size-cells" - port@0 - port@1 - additionalProperties: false - required: - compatible - reg diff --git a/dts/Bindings/display/allwinner,sun4i-a10-display-engine.yaml b/dts/Bindings/display/allwinner,sun4i-a10-display-engine.yaml index 944ff2f1cf..e6088f379f 100644 --- a/dts/Bindings/display/allwinner,sun4i-a10-display-engine.yaml +++ b/dts/Bindings/display/allwinner,sun4i-a10-display-engine.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-display-engine.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Allwinner A10 Display Engine Pipeline Device Tree Bindings +title: Allwinner A10 Display Engine Pipeline maintainers: - Chen-Yu Tsai <wens@csie.org> @@ -62,14 +62,16 @@ properties: - allwinner,sun8i-r40-display-engine - allwinner,sun8i-v3s-display-engine - allwinner,sun9i-a80-display-engine + - allwinner,sun20i-d1-display-engine - allwinner,sun50i-a64-display-engine - allwinner,sun50i-h6-display-engine allwinner,pipelines: - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle-array - - minItems: 1 - maxItems: 2 + $ref: /schemas/types.yaml#/definitions/phandle-array + minItems: 1 + maxItems: 2 + items: + maxItems: 1 description: | Available display engine frontends (DE 1.0) or mixers (DE 2.0/3.0) available. @@ -92,6 +94,7 @@ if: - allwinner,sun8i-a83t-display-engine - allwinner,sun8i-r40-display-engine - allwinner,sun9i-a80-display-engine + - allwinner,sun20i-d1-display-engine - allwinner,sun50i-a64-display-engine then: diff --git a/dts/Bindings/display/allwinner,sun4i-a10-display-frontend.yaml b/dts/Bindings/display/allwinner,sun4i-a10-display-frontend.yaml index 3eb1c2bbf4..98e8240a05 100644 --- a/dts/Bindings/display/allwinner,sun4i-a10-display-frontend.yaml +++ b/dts/Bindings/display/allwinner,sun4i-a10-display-frontend.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-display-frontend.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Allwinner A10 Display Engine Frontend Device Tree Bindings +title: Allwinner A10 Display Engine Frontend maintainers: - Chen-Yu Tsai <wens@csie.org> @@ -57,35 +57,22 @@ properties: maxItems: 1 ports: - type: object - description: | - A ports node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. + $ref: /schemas/graph.yaml#/properties/ports properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Input endpoints of the controller. port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Output endpoints of the controller. required: - - "#address-cells" - - "#size-cells" - port@1 - additionalProperties: false - required: - compatible - reg diff --git a/dts/Bindings/display/allwinner,sun4i-a10-hdmi.yaml b/dts/Bindings/display/allwinner,sun4i-a10-hdmi.yaml index 5d4915aed1..55703caacb 100644 --- a/dts/Bindings/display/allwinner,sun4i-a10-hdmi.yaml +++ b/dts/Bindings/display/allwinner,sun4i-a10-hdmi.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-hdmi.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Allwinner A10 HDMI Controller Device Tree Bindings +title: Allwinner A10 HDMI Controller description: | The HDMI Encoder supports the HDMI video and audio outputs, and does @@ -21,8 +21,8 @@ properties: - const: allwinner,sun5i-a10s-hdmi - const: allwinner,sun6i-a31-hdmi - items: - - const: allwinner,sun7i-a20-hdmi - - const: allwinner,sun5i-a10s-hdmi + - const: allwinner,sun7i-a20-hdmi + - const: allwinner,sun5i-a10s-hdmi reg: maxItems: 1 @@ -33,32 +33,32 @@ properties: clocks: oneOf: - items: - - description: The HDMI interface clock - - description: The HDMI module clock - - description: The first video PLL - - description: The second video PLL + - description: The HDMI interface clock + - description: The HDMI module clock + - description: The first video PLL + - description: The second video PLL - items: - - description: The HDMI interface clock - - description: The HDMI module clock - - description: The HDMI DDC clock - - description: The first video PLL - - description: The second video PLL + - description: The HDMI interface clock + - description: The HDMI module clock + - description: The HDMI DDC clock + - description: The first video PLL + - description: The second video PLL clock-names: oneOf: - items: - - const: ahb - - const: mod - - const: pll-0 - - const: pll-1 + - const: ahb + - const: mod + - const: pll-0 + - const: pll-1 - items: - - const: ahb - - const: mod - - const: ddc - - const: pll-0 - - const: pll-1 + - const: ahb + - const: mod + - const: ddc + - const: pll-0 + - const: pll-1 resets: maxItems: 1 @@ -76,37 +76,24 @@ properties: - const: audio-tx ports: - type: object - description: | - A ports node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. + $ref: /schemas/graph.yaml#/properties/ports properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Input endpoints of the controller. port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Output endpoints of the controller. Usually an HDMI connector. required: - - "#address-cells" - - "#size-cells" - port@0 - port@1 - additionalProperties: false - required: - compatible - reg diff --git a/dts/Bindings/display/allwinner,sun4i-a10-tcon.yaml b/dts/Bindings/display/allwinner,sun4i-a10-tcon.yaml index e5344c4ae2..724d93b919 100644 --- a/dts/Bindings/display/allwinner,sun4i-a10-tcon.yaml +++ b/dts/Bindings/display/allwinner,sun4i-a10-tcon.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-tcon.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Allwinner A10 Timings Controller (TCON) Device Tree Bindings +title: Allwinner A10 Timings Controller (TCON) maintainers: - Chen-Yu Tsai <wens@csie.org> @@ -33,28 +33,30 @@ properties: - const: allwinner,sun8i-v3s-tcon - const: allwinner,sun9i-a80-tcon-lcd - const: allwinner,sun9i-a80-tcon-tv + - const: allwinner,sun20i-d1-tcon-lcd + - const: allwinner,sun20i-d1-tcon-tv - items: - - enum: - - allwinner,sun7i-a20-tcon0 - - allwinner,sun7i-a20-tcon1 - - const: allwinner,sun7i-a20-tcon + - enum: + - allwinner,sun7i-a20-tcon0 + - allwinner,sun7i-a20-tcon1 + - const: allwinner,sun7i-a20-tcon - items: - - enum: - - allwinner,sun50i-a64-tcon-lcd - - const: allwinner,sun8i-a83t-tcon-lcd + - enum: + - allwinner,sun50i-a64-tcon-lcd + - const: allwinner,sun8i-a83t-tcon-lcd - items: - - enum: - - allwinner,sun8i-h3-tcon-tv - - allwinner,sun50i-a64-tcon-tv - - const: allwinner,sun8i-a83t-tcon-tv + - enum: + - allwinner,sun8i-h3-tcon-tv + - allwinner,sun50i-a64-tcon-tv + - const: allwinner,sun8i-a83t-tcon-tv - items: - - enum: - - allwinner,sun50i-h6-tcon-tv - - const: allwinner,sun8i-r40-tcon-tv + - enum: + - allwinner,sun50i-h6-tcon-tv + - const: allwinner,sun8i-r40-tcon-tv reg: maxItems: 1 @@ -71,11 +73,9 @@ properties: maxItems: 4 clock-output-names: - allOf: - - $ref: /schemas/types.yaml#/definitions/string-array - - maxItems: 1 description: Name of the LCD pixel clock created. + maxItems: 1 dmas: maxItems: 1 @@ -83,64 +83,57 @@ properties: resets: anyOf: - items: - - description: TCON Reset Line + - description: TCON Reset Line - items: - - description: TCON Reset Line - - description: TCON LVDS Reset Line + - description: TCON Reset Line + - description: TCON LVDS Reset Line - items: - - description: TCON Reset Line - - description: TCON eDP Reset Line + - description: TCON Reset Line + - description: TCON eDP Reset Line - items: - - description: TCON Reset Line - - description: TCON eDP Reset Line - - description: TCON LVDS Reset Line + - description: TCON Reset Line + - description: TCON eDP Reset Line + - description: TCON LVDS Reset Line reset-names: oneOf: - const: lcd - items: - - const: lcd - - const: lvds + - const: lcd + - const: lvds - items: - - const: lcd - - const: edp + - const: lcd + - const: edp - items: - - const: lcd - - const: edp - - const: lvds + - const: lcd + - const: edp + - const: lvds ports: - type: object - description: | - A ports node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. + $ref: /schemas/graph.yaml#/properties/ports properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Input endpoints of the controller. port@1: - type: object + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false description: | Output endpoints of the controller. patternProperties: "^endpoint(@[0-9])$": - type: object + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false properties: allwinner,tcon-channel: @@ -157,16 +150,10 @@ properties: property is not present, the endpoint number will be used as the channel number. - unevaluatedProperties: true - required: - - "#address-cells" - - "#size-cells" - port@0 - port@1 - additionalProperties: false - required: - compatible - reg @@ -246,6 +233,7 @@ allOf: - allwinner,sun8i-a83t-tcon-lcd - allwinner,sun8i-v3s-tcon - allwinner,sun9i-a80-tcon-lcd + - allwinner,sun20i-d1-tcon-lcd then: properties: @@ -265,6 +253,7 @@ allOf: - allwinner,sun8i-a83t-tcon-tv - allwinner,sun8i-r40-tcon-tv - allwinner,sun9i-a80-tcon-tv + - allwinner,sun20i-d1-tcon-tv then: properties: @@ -291,6 +280,7 @@ allOf: - allwinner,sun9i-a80-tcon-lcd - allwinner,sun4i-a10-tcon - allwinner,sun8i-a83t-tcon-lcd + - allwinner,sun20i-d1-tcon-lcd then: required: @@ -307,6 +297,7 @@ allOf: - allwinner,sun8i-a23-tcon - allwinner,sun8i-a33-tcon - allwinner,sun8i-a83t-tcon-lcd + - allwinner,sun20i-d1-tcon-lcd then: properties: diff --git a/dts/Bindings/display/allwinner,sun4i-a10-tv-encoder.yaml b/dts/Bindings/display/allwinner,sun4i-a10-tv-encoder.yaml index 6009324be9..c39e90a594 100644 --- a/dts/Bindings/display/allwinner,sun4i-a10-tv-encoder.yaml +++ b/dts/Bindings/display/allwinner,sun4i-a10-tv-encoder.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-tv-encoder.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Allwinner A10 TV Encoder Device Tree Bindings +title: Allwinner A10 TV Encoder maintainers: - Chen-Yu Tsai <wens@csie.org> @@ -24,11 +24,9 @@ properties: maxItems: 1 port: - type: object + $ref: /schemas/graph.yaml#/properties/port description: - A port node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. The - first port should be the input endpoint, usually coming from the + The first port should be the input endpoint, usually coming from the associated TCON. required: diff --git a/dts/Bindings/display/allwinner,sun6i-a31-drc.yaml b/dts/Bindings/display/allwinner,sun6i-a31-drc.yaml index 0c1ce55940..895506d93f 100644 --- a/dts/Bindings/display/allwinner,sun6i-a31-drc.yaml +++ b/dts/Bindings/display/allwinner,sun6i-a31-drc.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/display/allwinner,sun6i-a31-drc.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Allwinner A31 Dynamic Range Controller Device Tree Bindings +title: Allwinner A31 Dynamic Range Controller maintainers: - Chen-Yu Tsai <wens@csie.org> @@ -46,36 +46,23 @@ properties: maxItems: 1 ports: - type: object - description: | - A ports node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. + $ref: /schemas/graph.yaml#/properties/ports properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Input endpoints of the controller. port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Output endpoints of the controller. required: - - "#address-cells" - - "#size-cells" - port@0 - port@1 - additionalProperties: false - required: - compatible - reg diff --git a/dts/Bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml b/dts/Bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml index 9e90c2b009..c731fbdc2f 100644 --- a/dts/Bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml +++ b/dts/Bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml @@ -4,20 +4,22 @@ $id: http://devicetree.org/schemas/display/allwinner,sun6i-a31-mipi-dsi.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Allwinner A31 MIPI-DSI Controller Device Tree Bindings +title: Allwinner A31 MIPI-DSI Controller maintainers: - Chen-Yu Tsai <wens@csie.org> - Maxime Ripard <mripard@kernel.org> properties: - "#address-cells": true - "#size-cells": true - compatible: - enum: - - allwinner,sun6i-a31-mipi-dsi - - allwinner,sun50i-a64-mipi-dsi + oneOf: + - enum: + - allwinner,sun6i-a31-mipi-dsi + - allwinner,sun50i-a64-mipi-dsi + - allwinner,sun50i-a100-mipi-dsi + - items: + - const: allwinner,sun20i-d1-mipi-dsi + - const: allwinner,sun50i-a100-mipi-dsi reg: maxItems: 1 @@ -27,7 +29,6 @@ properties: clocks: minItems: 1 - maxItems: 2 items: - description: Bus Clock - description: Module Clock @@ -50,19 +51,12 @@ properties: const: dphy port: - type: object + $ref: /schemas/graph.yaml#/properties/port description: - A port node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. That - port should be the input endpoint, usually coming from the + The port should be the input endpoint, usually coming from the associated TCON. -patternProperties: - "^panel@[0-9]+$": true - required: - - "#address-cells" - - "#size-cells" - compatible - reg - interrupts @@ -70,36 +64,44 @@ required: - phys - phy-names - resets - - vcc-dsi-supply - port allOf: + - $ref: dsi-controller.yaml# - if: properties: - compatible: - contains: - const: allwinner,sun6i-a31-mipi-dsi + compatible: + contains: + enum: + - allwinner,sun6i-a31-mipi-dsi + - allwinner,sun50i-a100-mipi-dsi then: - properties: - clocks: - minItems: 2 + properties: + clocks: + minItems: 2 - required: - - clock-names + required: + - clock-names + + else: + properties: + clocks: + maxItems: 1 - if: properties: - compatible: - contains: - const: allwinner,sun50i-a64-mipi-dsi + compatible: + contains: + enum: + - allwinner,sun6i-a31-mipi-dsi + - allwinner,sun50i-a64-mipi-dsi then: - properties: - clocks: - minItems: 1 + required: + - vcc-dsi-supply -additionalProperties: false +unevaluatedProperties: false examples: - | @@ -119,7 +121,7 @@ examples: panel@0 { compatible = "bananapi,lhr050h41", "ilitek,ili9881c"; reg = <0>; - power-gpios = <&pio 1 7 0>; /* PB07 */ + power-supply = <®_display>; reset-gpios = <&r_pio 0 5 1>; /* PL05 */ backlight = <&pwm_bl>; }; diff --git a/dts/Bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml b/dts/Bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml index 1dee641e3e..b75c1ec686 100644 --- a/dts/Bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml +++ b/dts/Bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/display/allwinner,sun8i-a83t-de2-mixer.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Allwinner Display Engine 2.0 Mixer Device Tree Bindings +title: Allwinner Display Engine 2.0 Mixer maintainers: - Chen-Yu Tsai <wens@csie.org> @@ -19,6 +19,8 @@ properties: - allwinner,sun8i-r40-de2-mixer-0 - allwinner,sun8i-r40-de2-mixer-1 - allwinner,sun8i-v3s-de2-mixer + - allwinner,sun20i-d1-de2-mixer-0 + - allwinner,sun20i-d1-de2-mixer-1 - allwinner,sun50i-a64-de2-mixer-0 - allwinner,sun50i-a64-de2-mixer-1 - allwinner,sun50i-h6-de3-mixer-0 @@ -36,39 +38,29 @@ properties: - const: bus - const: mod + iommus: + maxItems: 1 + resets: maxItems: 1 ports: - type: object - description: | - A ports node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. + $ref: /schemas/graph.yaml#/properties/ports properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Input endpoints of the controller. port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Output endpoints of the controller. required: - - "#address-cells" - - "#size-cells" - port@1 - additionalProperties: false - required: - compatible - reg diff --git a/dts/Bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml b/dts/Bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml index 4d6795690a..60fd927b5a 100644 --- a/dts/Bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml +++ b/dts/Bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/display/allwinner,sun8i-a83t-dw-hdmi.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Allwinner A83t DWC HDMI TX Encoder Device Tree Bindings +title: Allwinner A83t DWC HDMI TX Encoder description: | The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller @@ -12,8 +12,8 @@ description: | and CEC. These DT bindings follow the Synopsys DWC HDMI TX bindings defined - in Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt with - the following device-specific properties. + in bridge/synopsys,dw-hdmi.yaml with the following device-specific + properties. maintainers: - Chen-Yu Tsai <wens@csie.org> @@ -29,11 +29,11 @@ properties: - const: allwinner,sun50i-h6-dw-hdmi - items: - - enum: - - allwinner,sun8i-h3-dw-hdmi - - allwinner,sun8i-r40-dw-hdmi - - allwinner,sun50i-a64-dw-hdmi - - const: allwinner,sun8i-a83t-dw-hdmi + - enum: + - allwinner,sun8i-h3-dw-hdmi + - allwinner,sun8i-r40-dw-hdmi + - allwinner,sun50i-a64-dw-hdmi + - const: allwinner,sun8i-a83t-dw-hdmi reg: maxItems: 1 @@ -46,7 +46,6 @@ properties: clocks: minItems: 3 - maxItems: 6 items: - description: Bus Clock - description: Register Clock @@ -57,7 +56,6 @@ properties: clock-names: minItems: 3 - maxItems: 6 items: - const: iahb - const: isfr @@ -68,14 +66,12 @@ properties: resets: minItems: 1 - maxItems: 2 items: - description: HDMI Controller Reset - description: HDCP Reset reset-names: minItems: 1 - maxItems: 2 items: - const: ctrl - const: hdcp @@ -93,38 +89,25 @@ properties: The VCC power supply of the controller ports: - type: object - description: | - A ports node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. + $ref: /schemas/graph.yaml#/properties/ports properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Input endpoints of the controller. Usually the associated TCON. port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Output endpoints of the controller. Usually an HDMI connector. required: - - "#address-cells" - - "#size-cells" - port@0 - port@1 - additionalProperties: false - required: - compatible - reg @@ -191,7 +174,6 @@ examples: phy-names = "phy"; pinctrl-names = "default"; pinctrl-0 = <&hdmi_pins>; - status = "disabled"; ports { #address-cells = <1>; @@ -250,7 +232,6 @@ examples: phy-names = "phy"; pinctrl-names = "default"; pinctrl-0 = <&hdmi_pins>; - status = "disabled"; ports { #address-cells = <1>; diff --git a/dts/Bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml b/dts/Bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml index 501cec1616..1b47f3d99a 100644 --- a/dts/Bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml +++ b/dts/Bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/display/allwinner,sun8i-a83t-hdmi-phy.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Allwinner A83t HDMI PHY Device Tree Bindings +title: Allwinner A83t HDMI PHY maintainers: - Chen-Yu Tsai <wens@csie.org> @@ -27,7 +27,6 @@ properties: clocks: minItems: 2 - maxItems: 4 items: - description: Bus Clock - description: Module Clock @@ -36,7 +35,6 @@ properties: clock-names: minItems: 2 - maxItems: 4 items: - const: bus - const: mod diff --git a/dts/Bindings/display/allwinner,sun8i-r40-tcon-top.yaml b/dts/Bindings/display/allwinner,sun8i-r40-tcon-top.yaml index b98ca60982..7d849c4095 100644 --- a/dts/Bindings/display/allwinner,sun8i-r40-tcon-top.yaml +++ b/dts/Bindings/display/allwinner,sun8i-r40-tcon-top.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/display/allwinner,sun8i-r40-tcon-top.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Allwinner R40 TCON TOP Device Tree Bindings +title: Allwinner R40 TCON TOP maintainers: - Chen-Yu Tsai <wens@csie.org> @@ -41,6 +41,7 @@ properties: compatible: enum: - allwinner,sun8i-r40-tcon-top + - allwinner,sun20i-d1-tcon-top - allwinner,sun50i-h6-tcon-top reg: @@ -49,172 +50,58 @@ properties: clocks: minItems: 2 maxItems: 6 - items: - - description: The TCON TOP interface clock - - description: The TCON TOP TV0 clock - - description: The TCON TOP TVE0 clock - - description: The TCON TOP TV1 clock - - description: The TCON TOP TVE1 clock - - description: The TCON TOP MIPI DSI clock clock-names: minItems: 2 maxItems: 6 - items: - - const: bus - - const: tcon-tv0 - - const: tve0 - - const: tcon-tv1 - - const: tve1 - - const: dsi clock-output-names: minItems: 1 maxItems: 3 - description: > - The first item is the name of the clock created for the TV0 - channel, the second item is the name of the TCON TV1 channel - clock and the third one is the name of the DSI channel clock. resets: maxItems: 1 ports: - type: object - description: | - A ports node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. - All ports should have only one endpoint connected to - remote endpoint. + $ref: /schemas/graph.yaml#/properties/ports properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Input endpoint for Mixer 0 mux. port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Output endpoint for Mixer 0 mux - properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - - reg: true - - patternProperties: - "^endpoint@[0-9]$": - type: object - - properties: - reg: - description: | - ID of the target TCON - - required: - - reg - - required: - - "#address-cells" - - "#size-cells" - - additionalProperties: false - port@2: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Input endpoint for Mixer 1 mux. port@3: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Output endpoint for Mixer 1 mux - properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - - reg: true - - patternProperties: - "^endpoint@[0-9]$": - type: object - - properties: - reg: - description: | - ID of the target TCON - - required: - - reg - - required: - - "#address-cells" - - "#size-cells" - - additionalProperties: false - port@4: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Input endpoint for HDMI mux. - properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - - reg: true - - patternProperties: - "^endpoint@[0-9]$": - type: object - - properties: - reg: - description: | - ID of the target TCON - - required: - - reg - - required: - - "#address-cells" - - "#size-cells" - - additionalProperties: false - port@5: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Output endpoint for HDMI mux required: - - "#address-cells" - - "#size-cells" - port@0 - port@1 - port@4 - port@5 - additionalProperties: false - required: - "#clock-cells" - compatible @@ -227,32 +114,92 @@ required: additionalProperties: false -if: - properties: - compatible: - contains: - const: allwinner,sun50i-h6-tcon-top - -then: - properties: - clocks: - maxItems: 2 - - clock-output-names: - maxItems: 1 - -else: - properties: - clocks: - minItems: 6 - - clock-output-names: - minItems: 3 - - ports: - required: - - port@2 - - port@3 +allOf: + - if: + properties: + compatible: + contains: + const: allwinner,sun8i-r40-tcon-top + + then: + properties: + clocks: + items: + - description: The TCON TOP interface clock + - description: The TCON TOP TV0 clock + - description: The TCON TOP TVE0 clock + - description: The TCON TOP TV1 clock + - description: The TCON TOP TVE1 clock + - description: The TCON TOP MIPI DSI clock + + clock-names: + items: + - const: bus + - const: tcon-tv0 + - const: tve0 + - const: tcon-tv1 + - const: tve1 + - const: dsi + + clock-output-names: + items: + - description: TCON TV0 output clock name + - description: TCON TV1 output clock name + - description: DSI output clock name + + ports: + required: + - port@2 + - port@3 + + - if: + properties: + compatible: + contains: + const: allwinner,sun20i-d1-tcon-top + + then: + properties: + clocks: + items: + - description: The TCON TOP interface clock + - description: The TCON TOP TV0 clock + - description: The TCON TOP TVE0 clock + - description: The TCON TOP MIPI DSI clock + + clock-names: + items: + - const: bus + - const: tcon-tv0 + - const: tve0 + - const: dsi + + clock-output-names: + items: + - description: TCON TV0 output clock name + - description: DSI output clock name + + - if: + properties: + compatible: + contains: + const: allwinner,sun50i-h6-tcon-top + + then: + properties: + clocks: + items: + - description: The TCON TOP interface clock + - description: The TCON TOP TV0 clock + + clock-names: + items: + - const: bus + - const: tcon-tv0 + + clock-output-names: + items: + - description: TCON TV0 output clock name examples: - | diff --git a/dts/Bindings/display/allwinner,sun9i-a80-deu.yaml b/dts/Bindings/display/allwinner,sun9i-a80-deu.yaml index 96de41d32b..193afee2c3 100644 --- a/dts/Bindings/display/allwinner,sun9i-a80-deu.yaml +++ b/dts/Bindings/display/allwinner,sun9i-a80-deu.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/display/allwinner,sun9i-a80-deu.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Allwinner A80 Detail Enhancement Unit Device Tree Bindings +title: Allwinner A80 Detail Enhancement Unit maintainers: - Chen-Yu Tsai <wens@csie.org> @@ -40,36 +40,23 @@ properties: maxItems: 1 ports: - type: object - description: | - A ports node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. + $ref: /schemas/graph.yaml#/properties/ports properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Input endpoints of the controller. port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Output endpoints of the controller. required: - - "#address-cells" - - "#size-cells" - port@0 - port@1 - additionalProperties: false - required: - compatible - reg diff --git a/dts/Bindings/display/amlogic,meson-dw-hdmi.yaml b/dts/Bindings/display/amlogic,meson-dw-hdmi.yaml index 0da42ab8fd..0c85894648 100644 --- a/dts/Bindings/display/amlogic,meson-dw-hdmi.yaml +++ b/dts/Bindings/display/amlogic,meson-dw-hdmi.yaml @@ -2,13 +2,16 @@ # Copyright 2019 BayLibre, SAS %YAML 1.2 --- -$id: "http://devicetree.org/schemas/display/amlogic,meson-dw-hdmi.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/display/amlogic,meson-dw-hdmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Amlogic specific extensions to the Synopsys Designware HDMI Controller maintainers: - - Neil Armstrong <narmstrong@baylibre.com> + - Neil Armstrong <neil.armstrong@linaro.org> + +allOf: + - $ref: /schemas/sound/dai-common.yaml# description: | The Amlogic Meson Synopsys Designware Integration is composed of @@ -81,12 +84,12 @@ properties: description: phandle to an external 5V regulator to power the HDMI logic port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: A port node pointing to the VENC Input port node. port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: A port node pointing to the TMDS Output port node. @@ -99,6 +102,8 @@ properties: "#sound-dai-cells": const: 0 + sound-name-prefix: true + required: - compatible - reg @@ -145,4 +150,3 @@ examples: }; }; }; - diff --git a/dts/Bindings/display/amlogic,meson-g12a-dw-mipi-dsi.yaml b/dts/Bindings/display/amlogic,meson-g12a-dw-mipi-dsi.yaml new file mode 100644 index 0000000000..a3428f0120 --- /dev/null +++ b/dts/Bindings/display/amlogic,meson-g12a-dw-mipi-dsi.yaml @@ -0,0 +1,118 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2020 BayLibre, SAS +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/amlogic,meson-g12a-dw-mipi-dsi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic specific extensions to the Synopsys Designware MIPI DSI Host Controller + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +description: | + The Amlogic Meson Synopsys Designware Integration is composed of + - A Synopsys DesignWare MIPI DSI Host Controller IP + - A TOP control block controlling the Clocks & Resets of the IP + +allOf: + - $ref: dsi-controller.yaml# + +properties: + compatible: + enum: + - amlogic,meson-g12a-dw-mipi-dsi + + reg: + maxItems: 1 + + clocks: + minItems: 3 + maxItems: 4 + + clock-names: + minItems: 3 + items: + - const: pclk + - const: bit + - const: px + - const: meas + + resets: + maxItems: 1 + + reset-names: + items: + - const: top + + phys: + maxItems: 1 + + phy-names: + items: + - const: dphy + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Input node to receive pixel data. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: DSI output node to panel. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - reset-names + - phys + - phy-names + - ports + +unevaluatedProperties: false + +examples: + - | + dsi@6000 { + compatible = "amlogic,meson-g12a-dw-mipi-dsi"; + reg = <0x6000 0x400>; + resets = <&reset_top>; + reset-names = "top"; + clocks = <&clk_pclk>, <&bit_clk>, <&clk_px>; + clock-names = "pclk", "bit", "px"; + phys = <&mipi_dphy>; + phy-names = "dphy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* VPU VENC Input */ + mipi_dsi_venc_port: port@0 { + reg = <0>; + + mipi_dsi_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + + /* DSI Output */ + mipi_dsi_panel_port: port@1 { + reg = <1>; + + mipi_out_panel: endpoint { + remote-endpoint = <&mipi_in_panel>; + }; + }; + }; + }; diff --git a/dts/Bindings/display/amlogic,meson-vpu.yaml b/dts/Bindings/display/amlogic,meson-vpu.yaml index a8d202c9d0..cb0a90f023 100644 --- a/dts/Bindings/display/amlogic,meson-vpu.yaml +++ b/dts/Bindings/display/amlogic,meson-vpu.yaml @@ -2,13 +2,13 @@ # Copyright 2019 BayLibre, SAS %YAML 1.2 --- -$id: "http://devicetree.org/schemas/display/amlogic,meson-vpu.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/display/amlogic,meson-vpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Amlogic Meson Display Controller maintainers: - - Neil Armstrong <narmstrong@baylibre.com> + - Neil Armstrong <neil.armstrong@linaro.org> description: | The Amlogic Meson Display controller is composed of several components @@ -78,20 +78,29 @@ properties: interrupts: maxItems: 1 + amlogic,canvas: + description: should point to a canvas provider node + $ref: /schemas/types.yaml#/definitions/phandle + power-domains: maxItems: 1 description: phandle to the associated power domain port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: A port node pointing to the CVBS VDAC port node. port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: A port node pointing to the HDMI-TX port node. + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: + A port node pointing to the DPI port node (e.g. DSI or LVDS transceiver). + "#address-cells": const: 1 @@ -106,6 +115,7 @@ required: - port@1 - "#address-cells" - "#size-cells" + - amlogic,canvas additionalProperties: false @@ -118,6 +128,7 @@ examples: interrupts = <3>; #address-cells = <1>; #size-cells = <0>; + amlogic,canvas = <&canvas>; /* CVBS VDAC output port */ port@0 { diff --git a/dts/Bindings/display/arm,hdlcd.txt b/dts/Bindings/display/arm,hdlcd.txt deleted file mode 100644 index 78bc24296f..0000000000 --- a/dts/Bindings/display/arm,hdlcd.txt +++ /dev/null @@ -1,79 +0,0 @@ -ARM HDLCD - -This is a display controller found on several development platforms produced -by ARM Ltd and in more modern of its' Fast Models. The HDLCD is an RGB -streamer that reads the data from a framebuffer and sends it to a single -digital encoder (DVI or HDMI). - -Required properties: - - compatible: "arm,hdlcd" - - reg: Physical base address and length of the controller's registers. - - interrupts: One interrupt used by the display controller to notify the - interrupt controller when any of the interrupt sources programmed in - the interrupt mask register have activated. - - clocks: A list of phandle + clock-specifier pairs, one for each - entry in 'clock-names'. - - clock-names: A list of clock names. For HDLCD it should contain: - - "pxlclk" for the clock feeding the output PLL of the controller. - -Required sub-nodes: - - port: The HDLCD connection to an encoder chip. The connection is modeled - using the OF graph bindings specified in - Documentation/devicetree/bindings/graph.txt. - -Optional properties: - - memory-region: phandle to a node describing memory (see - Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt) to be - used for the framebuffer; if not present, the framebuffer may be located - anywhere in memory. - - -Example: - -/ { - ... - - hdlcd@2b000000 { - compatible = "arm,hdlcd"; - reg = <0 0x2b000000 0 0x1000>; - interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&oscclk5>; - clock-names = "pxlclk"; - port { - hdlcd_output: endpoint@0 { - remote-endpoint = <&hdmi_enc_input>; - }; - }; - }; - - /* HDMI encoder on I2C bus */ - i2c@7ffa0000 { - .... - hdmi-transmitter@70 { - compatible = "....."; - reg = <0x70>; - port@0 { - hdmi_enc_input: endpoint { - remote-endpoint = <&hdlcd_output>; - }; - - hdmi_enc_output: endpoint { - remote-endpoint = <&hdmi_1_port>; - }; - }; - }; - - }; - - hdmi1: connector@1 { - compatible = "hdmi-connector"; - type = "a"; - port { - hdmi_1_port: endpoint { - remote-endpoint = <&hdmi_enc_output>; - }; - }; - }; - - ... -}; diff --git a/dts/Bindings/display/arm,hdlcd.yaml b/dts/Bindings/display/arm,hdlcd.yaml new file mode 100644 index 0000000000..9a30e9005e --- /dev/null +++ b/dts/Bindings/display/arm,hdlcd.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/arm,hdlcd.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm HDLCD display controller + +maintainers: + - Liviu Dudau <Liviu.Dudau@arm.com> + - Andre Przywara <andre.przywara@arm.com> + +description: + The Arm HDLCD is a display controller found on several development platforms + produced by ARM Ltd and in more modern of its Fast Models. The HDLCD is an + RGB streamer that reads the data from a framebuffer and sends it to a single + digital encoder (DVI or HDMI). + +properties: + compatible: + const: arm,hdlcd + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clock-names: + const: pxlclk + + clocks: + maxItems: 1 + description: The input reference for the pixel clock. + + memory-region: + maxItems: 1 + description: + Phandle to a node describing memory to be used for the framebuffer. + If not present, the framebuffer may be located anywhere in memory. + + iommus: + maxItems: 1 + + port: + $ref: /schemas/graph.yaml#/properties/port + unevaluatedProperties: false + description: + Output endpoint of the controller, connecting the LCD panel signals. + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - port + +examples: + - | + hdlcd@2b000000 { + compatible = "arm,hdlcd"; + reg = <0x2b000000 0x1000>; + interrupts = <0 85 4>; + clocks = <&oscclk5>; + clock-names = "pxlclk"; + port { + hdlcd_output: endpoint { + remote-endpoint = <&hdmi_enc_input>; + }; + }; + }; + + /* HDMI encoder on I2C bus */ + i2c { + #address-cells = <1>; + #size-cells = <0>; + hdmi-transmitter@70 { + compatible = "nxp,tda998x"; + reg = <0x70>; + port { + hdmi_enc_input: endpoint { + remote-endpoint = <&hdlcd_output>; + }; + }; + }; + }; +... diff --git a/dts/Bindings/display/arm,komeda.txt b/dts/Bindings/display/arm,komeda.txt deleted file mode 100644 index 8513695ee4..0000000000 --- a/dts/Bindings/display/arm,komeda.txt +++ /dev/null @@ -1,78 +0,0 @@ -Device Tree bindings for Arm Komeda display driver - -Required properties: -- compatible: Should be "arm,mali-d71" -- reg: Physical base address and length of the registers in the system -- interrupts: the interrupt line number of the device in the system -- clocks: A list of phandle + clock-specifier pairs, one for each entry - in 'clock-names' -- clock-names: A list of clock names. It should contain: - - "aclk": for the main processor clock -- #address-cells: Must be 1 -- #size-cells: Must be 0 -- iommus: configure the stream id to IOMMU, Must be configured if want to - enable iommu in display. for how to configure this node please reference - devicetree/bindings/iommu/arm,smmu-v3.txt, - devicetree/bindings/iommu/iommu.txt - -Required properties for sub-node: pipeline@nq -Each device contains one or two pipeline sub-nodes (at least one), each -pipeline node should provide properties: -- reg: Zero-indexed identifier for the pipeline -- clocks: A list of phandle + clock-specifier pairs, one for each entry - in 'clock-names' -- clock-names: should contain: - - "pxclk": pixel clock - -- port: each pipeline connect to an encoder input port. The connection is - modeled using the OF graph bindings specified in - Documentation/devicetree/bindings/graph.txt - -Optional properties: - - memory-region: phandle to a node describing memory (see - Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt) - to be used for the framebuffer; if not present, the framebuffer may - be located anywhere in memory. - -Example: -/ { - ... - - dp0: display@c00000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "arm,mali-d71"; - reg = <0xc00000 0x20000>; - interrupts = <0 168 4>; - clocks = <&dpu_aclk>; - clock-names = "aclk"; - iommus = <&smmu 0>, <&smmu 1>, <&smmu 2>, <&smmu 3>, - <&smmu 4>, <&smmu 5>, <&smmu 6>, <&smmu 7>, - <&smmu 8>, <&smmu 9>; - - dp0_pipe0: pipeline@0 { - clocks = <&fpgaosc2>; - clock-names = "pxclk"; - reg = <0>; - - port { - dp0_pipe0_out: endpoint { - remote-endpoint = <&db_dvi0_in>; - }; - }; - }; - - dp0_pipe1: pipeline@1 { - clocks = <&fpgaosc2>; - clock-names = "pxclk"; - reg = <1>; - - port { - dp0_pipe1_out: endpoint { - remote-endpoint = <&db_dvi1_in>; - }; - }; - }; - }; - ... -}; diff --git a/dts/Bindings/display/arm,komeda.yaml b/dts/Bindings/display/arm,komeda.yaml new file mode 100644 index 0000000000..3ad3eef89c --- /dev/null +++ b/dts/Bindings/display/arm,komeda.yaml @@ -0,0 +1,131 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/arm,komeda.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm Komeda display processor + +maintainers: + - Liviu Dudau <Liviu.Dudau@arm.com> + - Andre Przywara <andre.przywara@arm.com> + +description: + The Arm Mali D71 display processor supports up to two displays with up + to a 4K resolution each. Each pipeline can be composed of up to four + layers. It is typically connected to a digital display connector like HDMI. + +properties: + compatible: + oneOf: + - items: + - const: arm,mali-d32 + - const: arm,mali-d71 + - const: arm,mali-d71 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clock-names: + const: aclk + + clocks: + maxItems: 1 + description: The main DPU processor clock + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + memory-region: + maxItems: 1 + description: + Phandle to a node describing memory to be used for the framebuffer. + If not present, the framebuffer may be located anywhere in memory. + + iommus: + description: + The stream IDs for each of the used pipelines, each four IDs for the + four layers, plus one for the write-back stream. + minItems: 5 + maxItems: 10 + +patternProperties: + '^pipeline@[01]$': + type: object + additionalProperties: false + description: + clocks + + properties: + reg: + enum: [ 0, 1 ] + + clock-names: + const: pxclk + + clocks: + maxItems: 1 + description: The input reference for the pixel clock. + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + +additionalProperties: false + +required: + - "#address-cells" + - "#size-cells" + - compatible + - reg + - interrupts + - clock-names + - clocks + - pipeline@0 + +examples: + - | + display@c00000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "arm,mali-d71"; + reg = <0xc00000 0x20000>; + interrupts = <168>; + clocks = <&dpu_aclk>; + clock-names = "aclk"; + iommus = <&smmu 0>, <&smmu 1>, <&smmu 2>, <&smmu 3>, + <&smmu 8>, + <&smmu 4>, <&smmu 5>, <&smmu 6>, <&smmu 7>, + <&smmu 9>; + + dp0_pipe0: pipeline@0 { + clocks = <&fpgaosc2>; + clock-names = "pxclk"; + reg = <0>; + + port { + dp0_pipe0_out: endpoint { + remote-endpoint = <&db_dvi0_in>; + }; + }; + }; + + dp0_pipe1: pipeline@1 { + clocks = <&fpgaosc2>; + clock-names = "pxclk"; + reg = <1>; + + port { + dp0_pipe1_out: endpoint { + remote-endpoint = <&db_dvi1_in>; + }; + }; + }; + }; +... diff --git a/dts/Bindings/display/arm,malidp.txt b/dts/Bindings/display/arm,malidp.txt deleted file mode 100644 index 7a97a2b48c..0000000000 --- a/dts/Bindings/display/arm,malidp.txt +++ /dev/null @@ -1,68 +0,0 @@ -ARM Mali-DP - -The following bindings apply to a family of Display Processors sold as -licensable IP by ARM Ltd. The bindings describe the Mali DP500, DP550 and -DP650 processors that offer multiple composition layers, support for -rotation and scaling output. - -Required properties: - - compatible: should be one of - "arm,mali-dp500" - "arm,mali-dp550" - "arm,mali-dp650" - depending on the particular implementation present in the hardware - - reg: Physical base address and size of the block of registers used by - the processor. - - interrupts: Interrupt list, as defined in ../interrupt-controller/interrupts.txt, - interrupt client nodes. - - interrupt-names: name of the engine inside the processor that will - use the corresponding interrupt. Should be one of "DE" or "SE". - - clocks: A list of phandle + clock-specifier pairs, one for each entry - in 'clock-names' - - clock-names: A list of clock names. It should contain: - - "pclk": for the APB interface clock - - "aclk": for the AXI interface clock - - "mclk": for the main processor clock - - "pxlclk": for the pixel clock feeding the output PLL of the processor. - - arm,malidp-output-port-lines: Array of u8 values describing the number - of output lines per channel (R, G and B). - -Required sub-nodes: - - port: The Mali DP connection to an encoder input port. The connection - is modelled using the OF graph bindings specified in - Documentation/devicetree/bindings/graph.txt - -Optional properties: - - memory-region: phandle to a node describing memory (see - Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt) - to be used for the framebuffer; if not present, the framebuffer may - be located anywhere in memory. - - arm,malidp-arqos-high-level: integer of u32 value describing the ARQoS - levels of DP500's QoS signaling. - - -Example: - -/ { - ... - - dp0: malidp@6f200000 { - compatible = "arm,mali-dp650"; - reg = <0 0x6f200000 0 0x20000>; - memory-region = <&display_reserved>; - interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>, - <0 168 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "DE", "SE"; - clocks = <&oscclk2>, <&fpgaosc0>, <&fpgaosc1>, <&fpgaosc1>; - clock-names = "pxlclk", "mclk", "aclk", "pclk"; - arm,malidp-output-port-lines = /bits/ 8 <8 8 8>; - arm,malidp-arqos-high-level = <0xd000d000>; - port { - dp0_output: endpoint { - remote-endpoint = <&tda998x_2_input>; - }; - }; - }; - - ... -}; diff --git a/dts/Bindings/display/arm,malidp.yaml b/dts/Bindings/display/arm,malidp.yaml new file mode 100644 index 0000000000..91812573fd --- /dev/null +++ b/dts/Bindings/display/arm,malidp.yaml @@ -0,0 +1,119 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/arm,malidp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm Mali Display Processor (Mali-DP) + +maintainers: + - Liviu Dudau <Liviu.Dudau@arm.com> + - Andre Przywara <andre.przywara@arm.com> + +description: + The following bindings apply to a family of Display Processors sold as + licensable IP by ARM Ltd. The bindings describe the Mali DP500, DP550 and + DP650 processors that offer multiple composition layers, support for + rotation and scaling output. + +properties: + compatible: + enum: + - arm,mali-dp500 + - arm,mali-dp550 + - arm,mali-dp650 + + reg: + maxItems: 1 + + interrupts: + items: + - description: + The interrupt used by the Display Engine (DE). Can be shared with + the interrupt for the Scaling Engine (SE), but it will have to be + listed individually. + - description: + The interrupt used by the Scaling Engine (SE). Can be shared with + the interrupt for the Display Engine (DE), but it will have to be + listed individually. + + interrupt-names: + items: + - const: DE + - const: SE + + clock-names: + items: + - const: pxlclk + - const: mclk + - const: aclk + - const: pclk + + clocks: + items: + - description: the pixel clock feeding the output PLL of the processor + - description: the main processor clock + - description: the AXI interface clock + - description: the APB interface clock + + memory-region: + maxItems: 1 + description: + Phandle to a node describing memory to be used for the framebuffer. + If not present, the framebuffer may be located anywhere in memory. + + arm,malidp-output-port-lines: + $ref: /schemas/types.yaml#/definitions/uint8-array + description: + Number of output lines/bits for each colour channel. + items: + - description: number of output lines for the red channel (R) + - description: number of output lines for the green channel (G) + - description: number of output lines for the blue channel (B) + + arm,malidp-arqos-value: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Quality-of-Service value for the display engine FIFOs, to write + into the RQOS register of the DP500. + See the ARM Mali-DP500 TRM for details on the encoding. + If omitted, the RQOS register will not be changed. + + port: + $ref: /schemas/graph.yaml#/properties/port + unevaluatedProperties: false + description: + Output endpoint of the controller, connecting the LCD panel signals. + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + - clock-names + - port + - arm,malidp-output-port-lines + +examples: + - | + dp0: malidp@6f200000 { + compatible = "arm,mali-dp650"; + reg = <0x6f200000 0x20000>; + memory-region = <&display_reserved>; + interrupts = <168>, <168>; + interrupt-names = "DE", "SE"; + clocks = <&oscclk2>, <&fpgaosc0>, <&fpgaosc1>, <&fpgaosc1>; + clock-names = "pxlclk", "mclk", "aclk", "pclk"; + arm,malidp-output-port-lines = /bits/ 8 <8 8 8>; + arm,malidp-arqos-value = <0xd000d000>; + + port { + dp0_output: endpoint { + remote-endpoint = <&tda998x_2_input>; + }; + }; + }; +... diff --git a/dts/Bindings/display/arm,pl11x.txt b/dts/Bindings/display/arm,pl11x.txt deleted file mode 100644 index 3f977e72a2..0000000000 --- a/dts/Bindings/display/arm,pl11x.txt +++ /dev/null @@ -1,110 +0,0 @@ -* ARM PrimeCell Color LCD Controller PL110/PL111 - -See also Documentation/devicetree/bindings/arm/primecell.yaml - -Required properties: - -- compatible: must be one of: - "arm,pl110", "arm,primecell" - "arm,pl111", "arm,primecell" - -- reg: base address and size of the control registers block - -- interrupt-names: either the single entry "combined" representing a - combined interrupt output (CLCDINTR), or the four entries - "mbe", "vcomp", "lnbu", "fuf" representing the individual - CLCDMBEINTR, CLCDVCOMPINTR, CLCDLNBUINTR, CLCDFUFINTR interrupts - -- interrupts: contains an interrupt specifier for each entry in - interrupt-names - -- clock-names: should contain "clcdclk" and "apb_pclk" - -- clocks: contains phandle and clock specifier pairs for the entries - in the clock-names property. See - Documentation/devicetree/bindings/clock/clock-bindings.txt - -Optional properties: - -- memory-region: phandle to a node describing memory (see - Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt) - to be used for the framebuffer; if not present, the framebuffer - may be located anywhere in the memory - -- max-memory-bandwidth: maximum bandwidth in bytes per second that the - cell's memory interface can handle; if not present, the memory - interface is fast enough to handle all possible video modes - -Required sub-nodes: - -- port: describes LCD panel signals, following the common binding - for video transmitter interfaces; see - Documentation/devicetree/bindings/media/video-interfaces.txt - -Deprecated properties: - The port's endbpoint subnode had this, now deprecated property - in the past. Drivers should be able to survive without it: - - - arm,pl11x,tft-r0g0b0-pads: an array of three 32-bit values, - defining the way CLD pads are wired up; first value - contains index of the "CLD" external pin (pad) used - as R0 (first bit of the red component), second value - index of the pad used as G0, third value index of the - pad used as B0, see also "LCD panel signal multiplexing - details" paragraphs in the PL110/PL111 Technical - Reference Manuals; this implicitly defines available - color modes, for example: - - PL111 TFT 4:4:4 panel: - arm,pl11x,tft-r0g0b0-pads = <4 15 20>; - - PL110 TFT (1:)5:5:5 panel: - arm,pl11x,tft-r0g0b0-pads = <1 7 13>; - - PL111 TFT (1:)5:5:5 panel: - arm,pl11x,tft-r0g0b0-pads = <3 11 19>; - - PL111 TFT 5:6:5 panel: - arm,pl11x,tft-r0g0b0-pads = <3 10 19>; - - PL110 and PL111 TFT 8:8:8 panel: - arm,pl11x,tft-r0g0b0-pads = <0 8 16>; - - PL110 and PL111 TFT 8:8:8 panel, R & B components swapped: - arm,pl11x,tft-r0g0b0-pads = <16 8 0>; - - -Example: - - clcd@10020000 { - compatible = "arm,pl111", "arm,primecell"; - reg = <0x10020000 0x1000>; - interrupt-names = "combined"; - interrupts = <0 44 4>; - clocks = <&oscclk1>, <&oscclk2>; - clock-names = "clcdclk", "apb_pclk"; - max-memory-bandwidth = <94371840>; /* Bps, 1024x768@60 16bpp */ - - port { - clcd_pads: endpoint { - remote-endpoint = <&clcd_panel>; - }; - }; - - }; - - panel { - compatible = "panel-dpi"; - - port { - clcd_panel: endpoint { - remote-endpoint = <&clcd_pads>; - }; - }; - - panel-timing { - clock-frequency = <25175000>; - hactive = <640>; - hback-porch = <40>; - hfront-porch = <24>; - hsync-len = <96>; - vactive = <480>; - vback-porch = <32>; - vfront-porch = <11>; - vsync-len = <2>; - }; - }; diff --git a/dts/Bindings/display/arm,pl11x.yaml b/dts/Bindings/display/arm,pl11x.yaml new file mode 100644 index 0000000000..6cc9045e5c --- /dev/null +++ b/dts/Bindings/display/arm,pl11x.yaml @@ -0,0 +1,170 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/arm,pl11x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm PrimeCell Color LCD Controller PL110/PL111 + +maintainers: + - Liviu Dudau <Liviu.Dudau@arm.com> + - Andre Przywara <andre.przywara@arm.com> + +description: + The Arm Primcell PL010/PL111 is an LCD controller IP, than scans out + a framebuffer region in system memory, and creates timed signals for + a variety of LCD panels. + +# We need a select here so we don't match all nodes with 'arm,primecell' +select: + properties: + compatible: + contains: + enum: + - arm,pl110 + - arm,pl111 + required: + - compatible + +properties: + compatible: + items: + - enum: + - arm,pl110 + - arm,pl111 + - const: arm,primecell + + reg: + maxItems: 1 + + interrupt-names: + oneOf: + - const: combined + description: + The IP provides four individual interrupt lines, but also one + combined line. If the integration only connects this line to the + interrupt controller, this single interrupt is noted here. + - items: + - const: mbe # CLCDMBEINTR + - const: vcomp # CLCDVCOMPINTR + - const: lnbu # CLCDLNBUINTR + - const: fuf # CLCDFUFINTR + + interrupts: + minItems: 1 + maxItems: 4 + + clock-names: + items: + - const: clcdclk + - const: apb_pclk + + clocks: + items: + - description: The CLCDCLK reference clock for the controller. + - description: The HCLK AHB slave clock for the register access. + + memory-region: + maxItems: 1 + description: + Phandle to a node describing memory to be used for the framebuffer. + If not present, the framebuffer may be located anywhere in memory. + + max-memory-bandwidth: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Maximum bandwidth in bytes per second that the cell's memory interface + can handle. + If not present, the memory interface is fast enough to handle all + possible video modes. + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + description: + Output endpoint of the controller, connecting the LCD panel signals. + + properties: + endpoint: + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false + + properties: + arm,pl11x,tft-r0g0b0-pads: + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: index of CLD pad used for first red bit (R0) + - description: index of CLD pad used for first green bit (G0) + - description: index of CLD pad used for first blue bit (G0) + deprecated: true + description: | + DEPRECATED. An array of three 32-bit values, defining the way + CLD[23:0] pads are wired up. + The first value contains the index of the "CLD" external pin (pad) + used as R0 (first bit of the red component), the second value for + green, the third value for blue. + See also "LCD panel signal multiplexing details" paragraphs in the + PL110/PL111 Technical Reference Manuals. + This implicitly defines available color modes, for example: + - PL111 TFT 4:4:4 panel: + arm,pl11x,tft-r0g0b0-pads = <4 15 20>; + - PL110 TFT (1:)5:5:5 panel: + arm,pl11x,tft-r0g0b0-pads = <1 7 13>; + - PL111 TFT (1:)5:5:5 panel: + arm,pl11x,tft-r0g0b0-pads = <3 11 19>; + - PL111 TFT 5:6:5 panel: + arm,pl11x,tft-r0g0b0-pads = <3 10 19>; + - PL110 and PL111 TFT 8:8:8 panel: + arm,pl11x,tft-r0g0b0-pads = <0 8 16>; + - PL110 and PL111 TFT 8:8:8 panel, R & B components swapped: + arm,pl11x,tft-r0g0b0-pads = <16 8 0>; + +additionalProperties: false + +required: + - compatible + - reg + - clock-names + - clocks + - port + +allOf: + - if: + properties: + interrupts: + minItems: 2 + required: + - interrupts + then: + required: + - interrupt-names + +examples: + - | + clcd@10020000 { + compatible = "arm,pl111", "arm,primecell"; + reg = <0x10020000 0x1000>; + interrupt-names = "combined"; + interrupts = <44>; + clocks = <&oscclk1>, <&oscclk2>; + clock-names = "clcdclk", "apb_pclk"; + max-memory-bandwidth = <94371840>; /* Bps, 1024x768@60 16bpp */ + + port { + clcd_pads: endpoint { + remote-endpoint = <&clcd_panel>; + }; + }; + }; + + panel { + compatible = "arm,rtsm-display"; + + port { + clcd_panel: endpoint { + remote-endpoint = <&clcd_pads>; + }; + }; + }; +... diff --git a/dts/Bindings/display/atmel,lcdc.txt b/dts/Bindings/display/atmel,lcdc.txt index acb5a01321..b5e355ada2 100644 --- a/dts/Bindings/display/atmel,lcdc.txt +++ b/dts/Bindings/display/atmel,lcdc.txt @@ -9,7 +9,6 @@ Required properties: "atmel,at91sam9g45-lcdc" , "atmel,at91sam9g45es-lcdc" , "atmel,at91sam9rl-lcdc" , - "atmel,at32ap-lcdc" - reg : Should contain 1 register ranges(address and length). Can contain an additional register range(address and length) for fixed framebuffer memory. Useful for dedicated memories. diff --git a/dts/Bindings/display/atmel/hlcdc-dc.txt b/dts/Bindings/display/atmel/hlcdc-dc.txt index 0398aec488..923aea2534 100644 --- a/dts/Bindings/display/atmel/hlcdc-dc.txt +++ b/dts/Bindings/display/atmel/hlcdc-dc.txt @@ -12,7 +12,7 @@ Required properties: Required children nodes: Children nodes are encoding available output ports and their connections - to external devices using the OF graph reprensentation (see ../graph.txt). + to external devices using the OF graph representation (see ../graph.txt). At least one port node is required. Optional properties in grandchild nodes: diff --git a/dts/Bindings/display/brcm,bcm-vc4.txt b/dts/Bindings/display/brcm,bcm-vc4.txt deleted file mode 100644 index 26649b4c4d..0000000000 --- a/dts/Bindings/display/brcm,bcm-vc4.txt +++ /dev/null @@ -1,174 +0,0 @@ -Broadcom VC4 (VideoCore4) GPU - -The VC4 device present on the Raspberry Pi includes a display system -with HDMI output and the HVS (Hardware Video Scaler) for compositing -display planes. - -Required properties for VC4: -- compatible: Should be "brcm,bcm2835-vc4" or "brcm,cygnus-vc4" - -Required properties for Pixel Valve: -- compatible: Should be one of "brcm,bcm2835-pixelvalve0", - "brcm,bcm2835-pixelvalve1", or "brcm,bcm2835-pixelvalve2" -- reg: Physical base address and length of the PV's registers -- interrupts: The interrupt number - See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt - -Required properties for HVS: -- compatible: Should be "brcm,bcm2835-hvs" -- reg: Physical base address and length of the HVS's registers -- interrupts: The interrupt number - See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt - -Required properties for HDMI -- compatible: Should be "brcm,bcm2835-hdmi" -- reg: Physical base address and length of the two register ranges - ("HDMI" and "HD", in that order) -- interrupts: The interrupt numbers - See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt -- ddc: phandle of the I2C controller used for DDC EDID probing -- clocks: a) hdmi: The HDMI state machine clock - b) pixel: The pixel clock. - -Optional properties for HDMI: -- hpd-gpios: The GPIO pin for HDMI hotplug detect (if it doesn't appear - as an interrupt/status bit in the HDMI controller - itself). See bindings/pinctrl/brcm,bcm2835-gpio.txt -- dmas: Should contain one entry pointing to the DMA channel used to - transfer audio data -- dma-names: Should contain "audio-rx" - -Required properties for DPI: -- compatible: Should be "brcm,bcm2835-dpi" -- reg: Physical base address and length of the registers -- clocks: a) core: The core clock the unit runs on - b) pixel: The pixel clock that feeds the pixelvalve -- port: Port node with a single endpoint connecting to the panel - device, as defined in [1] - -Required properties for VEC: -- compatible: Should be "brcm,bcm2835-vec" -- reg: Physical base address and length of the registers -- clocks: The core clock the unit runs on -- interrupts: The interrupt number - See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt - -Required properties for V3D: -- compatible: Should be "brcm,bcm2835-v3d" or "brcm,cygnus-v3d" -- reg: Physical base address and length of the V3D's registers -- interrupts: The interrupt number - See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt - -Optional properties for V3D: -- clocks: The clock the unit runs on - -Required properties for DSI: -- compatible: Should be "brcm,bcm2835-dsi0" or "brcm,bcm2835-dsi1" -- reg: Physical base address and length of the DSI block's registers -- interrupts: The interrupt number - See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt -- clocks: a) phy: The DSI PLL clock feeding the DSI analog PHY - b) escape: The DSI ESC clock from CPRMAN - c) pixel: The DSI pixel clock from CPRMAN -- clock-output-names: - The 3 clocks output from the DSI analog PHY: dsi[01]_byte, - dsi[01]_ddr2, and dsi[01]_ddr - -Required properties for the TXP (writeback) block: -- compatible: Should be "brcm,bcm2835-txp" -- reg: Physical base address and length of the TXP block's registers -- interrupts: The interrupt number - See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt - -[1] Documentation/devicetree/bindings/media/video-interfaces.txt - -Example: -pixelvalve@7e807000 { - compatible = "brcm,bcm2835-pixelvalve2"; - reg = <0x7e807000 0x100>; - interrupts = <2 10>; /* pixelvalve */ -}; - -hvs@7e400000 { - compatible = "brcm,bcm2835-hvs"; - reg = <0x7e400000 0x6000>; - interrupts = <2 1>; -}; - -hdmi: hdmi@7e902000 { - compatible = "brcm,bcm2835-hdmi"; - reg = <0x7e902000 0x600>, - <0x7e808000 0x100>; - interrupts = <2 8>, <2 9>; - ddc = <&i2c2>; - hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; - clocks = <&clocks BCM2835_PLLH_PIX>, - <&clocks BCM2835_CLOCK_HSM>; - clock-names = "pixel", "hdmi"; -}; - -dpi: dpi@7e208000 { - compatible = "brcm,bcm2835-dpi"; - reg = <0x7e208000 0x8c>; - clocks = <&clocks BCM2835_CLOCK_VPU>, - <&clocks BCM2835_CLOCK_DPI>; - clock-names = "core", "pixel"; - #address-cells = <1>; - #size-cells = <0>; - - port { - dpi_out: endpoint@0 { - remote-endpoint = <&panel_in>; - }; - }; -}; - -dsi1: dsi@7e700000 { - compatible = "brcm,bcm2835-dsi1"; - reg = <0x7e700000 0x8c>; - interrupts = <2 12>; - #address-cells = <1>; - #size-cells = <0>; - #clock-cells = <1>; - - clocks = <&clocks BCM2835_PLLD_DSI1>, - <&clocks BCM2835_CLOCK_DSI1E>, - <&clocks BCM2835_CLOCK_DSI1P>; - clock-names = "phy", "escape", "pixel"; - - clock-output-names = "dsi1_byte", "dsi1_ddr2", "dsi1_ddr"; - - pitouchscreen: panel@0 { - compatible = "raspberrypi,touchscreen"; - reg = <0>; - - <...> - }; -}; - -vec: vec@7e806000 { - compatible = "brcm,bcm2835-vec"; - reg = <0x7e806000 0x1000>; - clocks = <&clocks BCM2835_CLOCK_VEC>; - interrupts = <2 27>; -}; - -v3d: v3d@7ec00000 { - compatible = "brcm,bcm2835-v3d"; - reg = <0x7ec00000 0x1000>; - interrupts = <1 10>; -}; - -vc4: gpu { - compatible = "brcm,bcm2835-vc4"; -}; - -panel: panel { - compatible = "ontat,yx700wv03", "simple-panel"; - - port { - panel_in: endpoint { - remote-endpoint = <&dpi_out>; - }; - }; -}; diff --git a/dts/Bindings/display/brcm,bcm2711-hdmi.yaml b/dts/Bindings/display/brcm,bcm2711-hdmi.yaml new file mode 100644 index 0000000000..5b35adf34c --- /dev/null +++ b/dts/Bindings/display/brcm,bcm2711-hdmi.yaml @@ -0,0 +1,141 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/brcm,bcm2711-hdmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM2711 HDMI Controller + +maintainers: + - Eric Anholt <eric@anholt.net> + +properties: + compatible: + enum: + - brcm,bcm2711-hdmi0 + - brcm,bcm2711-hdmi1 + + reg: + items: + - description: HDMI controller register range + - description: DVP register range + - description: HDMI PHY register range + - description: Rate Manager register range + - description: Packet RAM register range + - description: Metadata RAM register range + - description: CSC register range + - description: CEC register range + - description: HD register range + + reg-names: + items: + - const: hdmi + - const: dvp + - const: phy + - const: rm + - const: packet + - const: metadata + - const: csc + - const: cec + - const: hd + + clocks: + items: + - description: The HDMI state machine clock + - description: The Pixel BVB clock + - description: The HDMI Audio parent clock + - description: The HDMI CEC parent clock + + clock-names: + items: + - const: hdmi + - const: bvb + - const: audio + - const: cec + + interrupts: + items: + - description: CEC TX interrupt + - description: CEC RX interrupt + - description: CEC stuck at low interrupt + - description: Wake-up interrupt + - description: Hotplug connected interrupt + - description: Hotplug removed interrupt + + interrupt-names: + items: + - const: cec-tx + - const: cec-rx + - const: cec-low + - const: wakeup + - const: hpd-connected + - const: hpd-removed + + ddc: + $ref: /schemas/types.yaml#/definitions/phandle + description: > + Phandle of the I2C controller used for DDC EDID probing + + hpd-gpios: + maxItems: 1 + description: > + The GPIO pin for the HDMI hotplug detect (if it doesn't appear + as an interrupt/status bit in the HDMI controller itself) + + dmas: + maxItems: 1 + description: > + Should contain one entry pointing to the DMA channel used to + transfer audio data. + + dma-names: + const: audio-rx + + resets: + maxItems: 1 + + wifi-2.4ghz-coexistence: + type: boolean + description: > + Should the pixel frequencies in the WiFi frequencies range be + avoided? + +required: + - compatible + - reg + - reg-names + - clocks + - resets + - ddc + +additionalProperties: false + +examples: + - | + hdmi0: hdmi@7ef00700 { + compatible = "brcm,bcm2711-hdmi0"; + reg = <0x7ef00700 0x300>, + <0x7ef00300 0x200>, + <0x7ef00f00 0x80>, + <0x7ef00f80 0x80>, + <0x7ef01b00 0x200>, + <0x7ef01f00 0x400>, + <0x7ef00200 0x80>, + <0x7ef04300 0x100>, + <0x7ef20000 0x100>; + reg-names = "hdmi", + "dvp", + "phy", + "rm", + "packet", + "metadata", + "csc", + "cec", + "hd"; + clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>; + clock-names = "hdmi", "bvb", "audio", "cec"; + resets = <&dvp 0>; + ddc = <&ddc0>; + }; + +... diff --git a/dts/Bindings/display/brcm,bcm2835-dpi.yaml b/dts/Bindings/display/brcm,bcm2835-dpi.yaml new file mode 100644 index 0000000000..c9ad0ecc9b --- /dev/null +++ b/dts/Bindings/display/brcm,bcm2835-dpi.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/brcm,bcm2835-dpi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom VC4 (VideoCore4) DPI Controller + +maintainers: + - Eric Anholt <eric@anholt.net> + +properties: + compatible: + const: brcm,bcm2835-dpi + + reg: + maxItems: 1 + + clocks: + items: + - description: The core clock the unit runs on + - description: The pixel clock that feeds the pixelvalve + + clock-names: + items: + - const: core + - const: pixel + + port: + $ref: /schemas/graph.yaml#/properties/port + description: + Port node with a single endpoint connecting to the panel. + +required: + - compatible + - reg + - clocks + - clock-names + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/bcm2835.h> + + dpi: dpi@7e208000 { + compatible = "brcm,bcm2835-dpi"; + reg = <0x7e208000 0x8c>; + clocks = <&clocks BCM2835_CLOCK_VPU>, + <&clocks BCM2835_CLOCK_DPI>; + clock-names = "core", "pixel"; + + port { + dpi_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + +... diff --git a/dts/Bindings/display/brcm,bcm2835-dsi0.yaml b/dts/Bindings/display/brcm,bcm2835-dsi0.yaml new file mode 100644 index 0000000000..c8b2459d64 --- /dev/null +++ b/dts/Bindings/display/brcm,bcm2835-dsi0.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/brcm,bcm2835-dsi0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom VC4 (VideoCore4) DSI Controller + +maintainers: + - Eric Anholt <eric@anholt.net> + +allOf: + - $ref: dsi-controller.yaml# + +properties: + "#clock-cells": + const: 1 + + compatible: + enum: + - brcm,bcm2711-dsi1 + - brcm,bcm2835-dsi0 + - brcm,bcm2835-dsi1 + + reg: + maxItems: 1 + + clocks: + items: + - description: The DSI PLL clock feeding the DSI analog PHY + - description: The DSI ESC clock + - description: The DSI pixel clock + + clock-names: + items: + - const: phy + - const: escape + - const: pixel + + clock-output-names: true + # FIXME: The meta-schemas don't seem to allow it for now + # items: + # - description: The DSI byte clock for the PHY + # - description: The DSI DDR2 clock + # - description: The DSI DDR clock + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-names + - clock-output-names + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/bcm2835.h> + + dsi1: dsi@7e700000 { + compatible = "brcm,bcm2835-dsi1"; + reg = <0x7e700000 0x8c>; + interrupts = <2 12>; + #address-cells = <1>; + #size-cells = <0>; + #clock-cells = <1>; + + clocks = <&clocks BCM2835_PLLD_DSI1>, + <&clocks BCM2835_CLOCK_DSI1E>, + <&clocks BCM2835_CLOCK_DSI1P>; + clock-names = "phy", "escape", "pixel"; + + clock-output-names = "dsi1_byte", "dsi1_ddr2", "dsi1_ddr"; + + }; + +... diff --git a/dts/Bindings/display/brcm,bcm2835-hdmi.yaml b/dts/Bindings/display/brcm,bcm2835-hdmi.yaml new file mode 100644 index 0000000000..48c8cad0d9 --- /dev/null +++ b/dts/Bindings/display/brcm,bcm2835-hdmi.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/brcm,bcm2835-hdmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom VC4 (VideoCore4) HDMI Controller + +maintainers: + - Eric Anholt <eric@anholt.net> + +properties: + compatible: + const: brcm,bcm2835-hdmi + + reg: + items: + - description: HDMI register range + - description: HD register range + + interrupts: + minItems: 2 + + clocks: + items: + - description: The pixel clock + - description: The HDMI state machine clock + + clock-names: + items: + - const: pixel + - const: hdmi + + ddc: + $ref: /schemas/types.yaml#/definitions/phandle + description: > + Phandle of the I2C controller used for DDC EDID probing + + hpd-gpios: + maxItems: 1 + description: > + The GPIO pin for the HDMI hotplug detect (if it doesn't appear + as an interrupt/status bit in the HDMI controller itself) + + dmas: + maxItems: 1 + description: > + Should contain one entry pointing to the DMA channel used to + transfer audio data. + + dma-names: + const: audio-rx + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - ddc + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/bcm2835.h> + #include <dt-bindings/gpio/gpio.h> + + hdmi: hdmi@7e902000 { + compatible = "brcm,bcm2835-hdmi"; + reg = <0x7e902000 0x600>, + <0x7e808000 0x100>; + interrupts = <2 8>, <2 9>; + ddc = <&i2c2>; + hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; + clocks = <&clocks BCM2835_PLLH_PIX>, + <&clocks BCM2835_CLOCK_HSM>; + clock-names = "pixel", "hdmi"; + }; + +... diff --git a/dts/Bindings/display/brcm,bcm2835-hvs.yaml b/dts/Bindings/display/brcm,bcm2835-hvs.yaml new file mode 100644 index 0000000000..2e8566f47e --- /dev/null +++ b/dts/Bindings/display/brcm,bcm2835-hvs.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/brcm,bcm2835-hvs.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom VC4 (VideoCore4) Hardware Video Scaler + +maintainers: + - Eric Anholt <eric@anholt.net> + +properties: + compatible: + enum: + - brcm,bcm2711-hvs + - brcm,bcm2835-hvs + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + description: Core Clock + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +if: + properties: + compatible: + contains: + const: brcm,bcm2711-hvs + +then: + required: + - clocks + +examples: + - | + hvs@7e400000 { + compatible = "brcm,bcm2835-hvs"; + reg = <0x7e400000 0x6000>; + interrupts = <2 1>; + }; + +... diff --git a/dts/Bindings/display/brcm,bcm2835-pixelvalve0.yaml b/dts/Bindings/display/brcm,bcm2835-pixelvalve0.yaml new file mode 100644 index 0000000000..4e1ba03f64 --- /dev/null +++ b/dts/Bindings/display/brcm,bcm2835-pixelvalve0.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/brcm,bcm2835-pixelvalve0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom VC4 (VideoCore4) PixelValve + +maintainers: + - Eric Anholt <eric@anholt.net> + +properties: + compatible: + enum: + - brcm,bcm2835-pixelvalve0 + - brcm,bcm2835-pixelvalve1 + - brcm,bcm2835-pixelvalve2 + - brcm,bcm2711-pixelvalve0 + - brcm,bcm2711-pixelvalve1 + - brcm,bcm2711-pixelvalve2 + - brcm,bcm2711-pixelvalve3 + - brcm,bcm2711-pixelvalve4 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + pixelvalve@7e807000 { + compatible = "brcm,bcm2835-pixelvalve2"; + reg = <0x7e807000 0x100>; + interrupts = <2 10>; /* pixelvalve */ + }; + +... diff --git a/dts/Bindings/display/brcm,bcm2835-txp.yaml b/dts/Bindings/display/brcm,bcm2835-txp.yaml new file mode 100644 index 0000000000..bb186197e4 --- /dev/null +++ b/dts/Bindings/display/brcm,bcm2835-txp.yaml @@ -0,0 +1,37 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/brcm,bcm2835-txp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom VC4 (VideoCore4) TXP (writeback) Controller + +maintainers: + - Eric Anholt <eric@anholt.net> + +properties: + compatible: + const: brcm,bcm2835-txp + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + txp: txp@7e004000 { + compatible = "brcm,bcm2835-txp"; + reg = <0x7e004000 0x20>; + interrupts = <1 11>; + }; + +... diff --git a/dts/Bindings/display/brcm,bcm2835-v3d.yaml b/dts/Bindings/display/brcm,bcm2835-v3d.yaml new file mode 100644 index 0000000000..c55a8217de --- /dev/null +++ b/dts/Bindings/display/brcm,bcm2835-v3d.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/brcm,bcm2835-v3d.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom VC4 (VideoCore4) V3D GPU + +maintainers: + - Eric Anholt <eric@anholt.net> + +properties: + compatible: + enum: + - brcm,bcm2835-v3d + - brcm,cygnus-v3d + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + v3d: v3d@7ec00000 { + compatible = "brcm,bcm2835-v3d"; + reg = <0x7ec00000 0x1000>; + interrupts = <1 10>; + }; + +... diff --git a/dts/Bindings/display/brcm,bcm2835-vc4.yaml b/dts/Bindings/display/brcm,bcm2835-vc4.yaml new file mode 100644 index 0000000000..49a5e041aa --- /dev/null +++ b/dts/Bindings/display/brcm,bcm2835-vc4.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/brcm,bcm2835-vc4.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom VC4 (VideoCore4) GPU + +maintainers: + - Eric Anholt <eric@anholt.net> + +description: > + The VC4 device present on the Raspberry Pi includes a display system + with HDMI output and the HVS (Hardware Video Scaler) for compositing + display planes. + +properties: + compatible: + enum: + - brcm,bcm2711-vc5 + - brcm,bcm2835-vc4 + - brcm,cygnus-vc4 + +required: + - compatible + +additionalProperties: false + +examples: + - | + vc4: gpu { + compatible = "brcm,bcm2835-vc4"; + }; + +... diff --git a/dts/Bindings/display/brcm,bcm2835-vec.yaml b/dts/Bindings/display/brcm,bcm2835-vec.yaml new file mode 100644 index 0000000000..5d921e3039 --- /dev/null +++ b/dts/Bindings/display/brcm,bcm2835-vec.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/brcm,bcm2835-vec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom VC4 (VideoCore4) VEC + +maintainers: + - Eric Anholt <eric@anholt.net> + +properties: + compatible: + enum: + - brcm,bcm2711-vec + - brcm,bcm2835-vec + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/bcm2835.h> + + vec: vec@7e806000 { + compatible = "brcm,bcm2835-vec"; + reg = <0x7e806000 0x1000>; + clocks = <&clocks BCM2835_CLOCK_VEC>; + interrupts = <2 27>; + }; + +... diff --git a/dts/Bindings/display/bridge/adi,adv7123.txt b/dts/Bindings/display/bridge/adi,adv7123.txt deleted file mode 100644 index d3c2a4914e..0000000000 --- a/dts/Bindings/display/bridge/adi,adv7123.txt +++ /dev/null @@ -1,50 +0,0 @@ -Analog Devices ADV7123 Video DAC --------------------------------- - -The ADV7123 is a digital-to-analog converter that outputs VGA signals from a -parallel video input. - -Required properties: - -- compatible: Should be "adi,adv7123" - -Optional properties: - -- psave-gpios: Power save control GPIO - -Required nodes: - -The ADV7123 has two video ports. Their connections are modeled using the OF -graph bindings specified in Documentation/devicetree/bindings/graph.txt. - -- Video port 0 for DPI input -- Video port 1 for VGA output - - -Example -------- - - adv7123: encoder@0 { - compatible = "adi,adv7123"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - adv7123_in: endpoint@0 { - remote-endpoint = <&dpi_out>; - }; - }; - - port@1 { - reg = <1>; - - adv7123_out: endpoint@0 { - remote-endpoint = <&vga_connector_in>; - }; - }; - }; - }; diff --git a/dts/Bindings/display/bridge/adi,adv7511.txt b/dts/Bindings/display/bridge/adi,adv7511.txt deleted file mode 100644 index 659523f538..0000000000 --- a/dts/Bindings/display/bridge/adi,adv7511.txt +++ /dev/null @@ -1,143 +0,0 @@ -Analog Devices ADV7511(W)/13/33/35 HDMI Encoders ------------------------------------------------- - -The ADV7511, ADV7511W, ADV7513, ADV7533 and ADV7535 are HDMI audio and video -transmitters compatible with HDMI 1.4 and DVI 1.0. They support color space -conversion, S/PDIF, CEC and HDCP. ADV7533/5 supports the DSI interface for input -pixels, while the others support RGB interface. - -Required properties: - -- compatible: Should be one of: - "adi,adv7511" - "adi,adv7511w" - "adi,adv7513" - "adi,adv7533" - "adi,adv7535" - -- reg: I2C slave addresses - The ADV7511 internal registers are split into four pages exposed through - different I2C addresses, creating four register maps. Each map has it own - I2C address and acts as a standard slave device on the I2C bus. The main - address is mandatory, others are optional and revert to defaults if not - specified. - - -The ADV7511 supports a large number of input data formats that differ by their -color depth, color format, clock mode, bit justification and random -arrangement of components on the data bus. The combination of the following -properties describe the input and map directly to the video input tables of the -ADV7511 datasheet that document all the supported combinations. - -- adi,input-depth: Number of bits per color component at the input (8, 10 or - 12). -- adi,input-colorspace: The input color space, one of "rgb", "yuv422" or - "yuv444". -- adi,input-clock: The input clock type, one of "1x" (one clock cycle per - pixel), "2x" (two clock cycles per pixel), "ddr" (one clock cycle per pixel, - data driven on both edges). - -The following input format properties are required except in "rgb 1x" and -"yuv444 1x" modes, in which case they must not be specified. - -- adi,input-style: The input components arrangement variant (1, 2 or 3), as - listed in the input format tables in the datasheet. -- adi,input-justification: The input bit justification ("left", "evenly", - "right"). - -- avdd-supply: A 1.8V supply that powers up the AVDD pin on the chip. -- dvdd-supply: A 1.8V supply that powers up the DVDD pin on the chip. -- pvdd-supply: A 1.8V supply that powers up the PVDD pin on the chip. -- dvdd-3v-supply: A 3.3V supply that powers up the pin called DVDD_3V - on the chip. -- bgvdd-supply: A 1.8V supply that powers up the BGVDD pin. This is - needed only for ADV7511. - -The following properties are required for ADV7533 and ADV7535: - -- adi,dsi-lanes: Number of DSI data lanes connected to the DSI host. It should - be one of 1, 2, 3 or 4. -- a2vdd-supply: 1.8V supply that powers up the A2VDD pin on the chip. -- v3p3-supply: A 3.3V supply that powers up the V3P3 pin on the chip. -- v1p2-supply: A supply that powers up the V1P2 pin on the chip. It can be - either 1.2V or 1.8V for ADV7533 but only 1.8V for ADV7535. - -Optional properties: - -- interrupts: Specifier for the ADV7511 interrupt -- pd-gpios: Specifier for the GPIO connected to the power down signal - -- adi,clock-delay: Video data clock delay relative to the pixel clock, in ps - (-1200 ps .. 1600 ps). Defaults to no delay. -- adi,embedded-sync: The input uses synchronization signals embedded in the - data stream (similar to BT.656). Defaults to separate H/V synchronization - signals. -- adi,disable-timing-generator: Only for ADV7533 and ADV7535. Disables the - internal timing generator. The chip will rely on the sync signals in the - DSI data lanes, rather than generate its own timings for HDMI output. -- clocks: from common clock binding: reference to the CEC clock. -- clock-names: from common clock binding: must be "cec". -- reg-names : Names of maps with programmable addresses. - It can contain any map needing a non-default address. - Possible maps names are : "main", "edid", "cec", "packet" - -Required nodes: - -The ADV7511 has two video ports. Their connections are modelled using the OF -graph bindings specified in Documentation/devicetree/bindings/graph.txt. - -- Video port 0 for the RGB, YUV or DSI input. In the case of ADV7533/5, the - remote endpoint phandle should be a reference to a valid mipi_dsi_host device - node. -- Video port 1 for the HDMI output -- Audio port 2 for the HDMI audio input - - -Example -------- - - adv7511w: hdmi@39 { - compatible = "adi,adv7511w"; - /* - * The EDID page will be accessible on address 0x66 on the I2C - * bus. All other maps continue to use their default addresses. - */ - reg = <0x39>, <0x66>; - reg-names = "main", "edid"; - interrupt-parent = <&gpio3>; - interrupts = <29 IRQ_TYPE_EDGE_FALLING>; - clocks = <&cec_clock>; - clock-names = "cec"; - - adi,input-depth = <8>; - adi,input-colorspace = "rgb"; - adi,input-clock = "1x"; - adi,input-style = <1>; - adi,input-justification = "evenly"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - adv7511w_in: endpoint { - remote-endpoint = <&dpi_out>; - }; - }; - - port@1 { - reg = <1>; - adv7511_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; - }; - - port@2 { - reg = <2>; - codec_endpoint: endpoint { - remote-endpoint = <&i2s0_cpu_endpoint>; - }; - }; - }; - }; diff --git a/dts/Bindings/display/bridge/adi,adv7511.yaml b/dts/Bindings/display/bridge/adi,adv7511.yaml new file mode 100644 index 0000000000..5bbe81862c --- /dev/null +++ b/dts/Bindings/display/bridge/adi,adv7511.yaml @@ -0,0 +1,237 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/adi,adv7511.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADV7511/11W/13 HDMI Encoders + +maintainers: + - Laurent Pinchart <laurent.pinchart@ideasonboard.com> + +description: | + The ADV7511, ADV7511W and ADV7513 are HDMI audio and video + transmitters compatible with HDMI 1.4 and DVI 1.0. They support color + space conversion, S/PDIF, CEC and HDCP. The transmitter input is + parallel RGB or YUV data. + +properties: + compatible: + enum: + - adi,adv7511 + - adi,adv7511w + - adi,adv7513 + + reg: + description: | + I2C slave addresses. + + The ADV7511/11W/13 internal registers are split into four pages + exposed through different I2C addresses, creating four register + maps. Each map has it own I2C address and acts as a standard slave + device on the I2C bus. The main address is mandatory, others are + optional and revert to defaults if not specified. + minItems: 1 + maxItems: 4 + + reg-names: + description: + Names of maps with programmable addresses. It can contain any map + needing a non-default address. + minItems: 1 + items: + - const: main + - const: edid + - const: cec + - const: packet + + clocks: + description: Reference to the CEC clock. + maxItems: 1 + + clock-names: + const: cec + + interrupts: + maxItems: 1 + + pd-gpios: + description: GPIO connected to the power down signal. + maxItems: 1 + + avdd-supply: + description: A 1.8V supply that powers up the AVDD pin. + + dvdd-supply: + description: A 1.8V supply that powers up the DVDD pin. + + pvdd-supply: + description: A 1.8V supply that powers up the PVDD pin. + + dvdd-3v-supply: + description: A 3.3V supply that powers up the DVDD_3V pin. + + bgvdd-supply: + description: A 1.8V supply that powers up the BGVDD pin. + + adi,input-depth: + description: Number of bits per color component at the input. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 8, 10, 12 ] + + adi,input-colorspace: + description: Input color space. + enum: [ rgb, yuv422, yuv444 ] + + adi,input-clock: + description: | + Input clock type. + "1x": one clock cycle per pixel + "2x": two clock cycles per pixel + "dd": one clock cycle per pixel, data driven on both edges + enum: [ 1x, 2x, dd ] + + adi,clock-delay: + description: + Video data clock delay relative to the pixel clock, in ps + (-1200ps .. 1600 ps). + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + + adi,embedded-sync: + description: + If defined, the input uses synchronization signals embedded in the + data stream (similar to BT.656). + type: boolean + + adi,input-style: + description: + Input components arrangement variant as listed in the input + format tables in the datasheet. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 1, 2, 3 ] + + adi,input-justification: + description: Input bit justification. + enum: [ left, evenly, right ] + + ports: + description: + The ADV7511(W)/13 has two video ports and one audio port. + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + description: Video port for the RGB or YUV input. + $ref: /schemas/graph.yaml#/properties/port + + port@1: + description: Video port for the HDMI output. + $ref: /schemas/graph.yaml#/properties/port + + port@2: + description: Audio port for the HDMI output. + $ref: /schemas/graph.yaml#/properties/port + +# adi,input-colorspace and adi,input-clock are required except in +# "rgb 1x" and "yuv444 1x" modes, in which case they must not be +# specified. +if: + not: + properties: + adi,input-colorspace: + contains: + enum: [ rgb, yuv444 ] + adi,input-clock: + contains: + const: 1x + +then: + required: + - adi,input-style + - adi,input-justification + +else: + properties: + adi,input-style: false + adi,input-justification: false + + +required: + - compatible + - reg + - ports + - adi,input-depth + - adi,input-colorspace + - adi,input-clock + - avdd-supply + - dvdd-supply + - pvdd-supply + - dvdd-3v-supply + - bgvdd-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <0 0xe6500000>; + + adv7511w: hdmi@39 { + compatible = "adi,adv7511w"; + /* + * The EDID page will be accessible on address 0x66 on the I2C + * bus. All other maps continue to use their default addresses. + */ + reg = <0x39>, <0x66>; + reg-names = "main", "edid"; + interrupt-parent = <&gpio3>; + interrupts = <29 IRQ_TYPE_EDGE_FALLING>; + clocks = <&cec_clock>; + clock-names = "cec"; + avdd-supply = <&v1v8>; + dvdd-supply = <&v1v8>; + pvdd-supply = <&v1v8>; + dvdd-3v-supply = <&v3v3>; + bgvdd-supply = <&v1v8>; + + adi,input-depth = <8>; + adi,input-colorspace = "yuv422"; + adi,input-clock = "1x"; + + adi,input-style = <3>; + adi,input-justification = "right"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511w_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + + port@2 { + reg = <2>; + codec_endpoint: endpoint { + remote-endpoint = <&i2s0_cpu_endpoint>; + }; + }; + }; + }; + }; + +... diff --git a/dts/Bindings/display/bridge/adi,adv7533.yaml b/dts/Bindings/display/bridge/adi,adv7533.yaml new file mode 100644 index 0000000000..df20a3c9c7 --- /dev/null +++ b/dts/Bindings/display/bridge/adi,adv7533.yaml @@ -0,0 +1,188 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/adi,adv7533.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADV7533/35 HDMI Encoders + +maintainers: + - Laurent Pinchart <laurent.pinchart@ideasonboard.com> + +allOf: + - $ref: /schemas/sound/dai-common.yaml# + +description: | + The ADV7533 and ADV7535 are HDMI audio and video transmitters + compatible with HDMI 1.4 and DVI 1.0. They support color space + conversion, S/PDIF, CEC and HDCP. The transmitter input is MIPI DSI. + +properties: + compatible: + enum: + - adi,adv7533 + - adi,adv7535 + + reg: + description: | + I2C slave addresses. + + The ADV7533/35 internal registers are split into four pages + exposed through different I2C addresses, creating four register + maps. Each map has it own I2C address and acts as a standard slave + device on the I2C bus. The main address is mandatory, others are + optional and revert to defaults if not specified. + minItems: 1 + maxItems: 4 + + reg-names: + description: + Names of maps with programmable addresses. It can contain any map + needing a non-default address. + minItems: 1 + items: + - const: main + - const: edid + - const: cec + - const: packet + + clocks: + description: Reference to the CEC clock. + maxItems: 1 + + clock-names: + const: cec + + interrupts: + maxItems: 1 + + pd-gpios: + description: GPIO connected to the power down signal. + maxItems: 1 + + avdd-supply: + description: A 1.8V supply that powers up the AVDD pin. + + dvdd-supply: + description: A 1.8V supply that powers up the DVDD pin. + + pvdd-supply: + description: A 1.8V supply that powers up the PVDD pin. + + a2vdd-supply: + description: A 1.8V supply that powers up the A2VDD pin. + + v3p3-supply: + description: A 3.3V supply that powers up the V3P3 pin. + + v1p2-supply: + description: + A supply that powers up the V1P2 pin. It can be either 1.2V + or 1.8V for ADV7533 but only 1.8V for ADV7535. + + adi,disable-timing-generator: + description: + Disables the internal timing generator. The chip will rely on the + sync signals in the DSI data lanes, rather than generating its own + timings for HDMI output. + type: boolean + + adi,dsi-lanes: + description: Number of DSI data lanes connected to the DSI host. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 1, 2, 3, 4 ] + + "#sound-dai-cells": + const: 0 + + ports: + description: + The ADV7533/35 has two video ports and one audio port. + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + description: + Video port for the DSI input. The remote endpoint phandle + should be a reference to a valid mipi_dsi_host_device. + $ref: /schemas/graph.yaml#/properties/port + + port@1: + description: Video port for the HDMI output. + $ref: /schemas/graph.yaml#/properties/port + + port@2: + description: Audio port for the HDMI output. + $ref: /schemas/graph.yaml#/properties/port + +required: + - compatible + - reg + - ports + - adi,dsi-lanes + - avdd-supply + - dvdd-supply + - pvdd-supply + - a2vdd-supply + - v3p3-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <0 0xe6500000>; + + adv7533: hdmi@39 { + compatible = "adi,adv7533"; + /* + * The EDID page will be accessible on address 0x66 on the I2C + * bus. All other maps continue to use their default addresses. + */ + reg = <0x39>, <0x66>; + reg-names = "main", "edid"; + interrupt-parent = <&gpio3>; + interrupts = <29 IRQ_TYPE_EDGE_FALLING>; + clocks = <&cec_clock>; + clock-names = "cec"; + adi,dsi-lanes = <4>; + avdd-supply = <&v1v8>; + dvdd-supply = <&v1v8>; + pvdd-supply = <&v1v8>; + a2vdd-supply = <&v1v8>; + v3p3-supply = <&v3v3>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7533_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + + port@1 { + reg = <1>; + adv7533_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + + port@2 { + reg = <2>; + codec_endpoint: endpoint { + remote-endpoint = <&i2s0_cpu_endpoint>; + }; + }; + }; + }; + }; + +... diff --git a/dts/Bindings/display/bridge/analogix,anx7625.yaml b/dts/Bindings/display/bridge/analogix,anx7625.yaml new file mode 100644 index 0000000000..a1ed100465 --- /dev/null +++ b/dts/Bindings/display/bridge/analogix,anx7625.yaml @@ -0,0 +1,187 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 Analogix Semiconductor, Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/analogix,anx7625.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analogix ANX7625 SlimPort (4K Mobile HD Transmitter) + +maintainers: + - Xin Ji <xji@analogixsemi.com> + +description: | + The ANX7625 is an ultra-low power 4K Mobile HD Transmitter + designed for portable devices. + +properties: + compatible: + const: analogix,anx7625 + + reg: + maxItems: 1 + + interrupts: + description: used for interrupt pin B8. + maxItems: 1 + + enable-gpios: + description: used for power on chip control, POWER_EN pin D2. + maxItems: 1 + + reset-gpios: + description: used for reset chip control, RESET_N pin B7. + maxItems: 1 + + vdd10-supply: + description: Regulator that provides the supply 1.0V power. + + vdd18-supply: + description: Regulator that provides the supply 1.8V power. + + vdd33-supply: + description: Regulator that provides the supply 3.3V power. + + analogix,lane0-swing: + $ref: /schemas/types.yaml#/definitions/uint8-array + minItems: 1 + maxItems: 20 + description: + an array of swing register setting for DP tx lane0 PHY. + Registers 0~9 are Swing0_Pre0, Swing1_Pre0, Swing2_Pre0, + Swing3_Pre0, Swing0_Pre1, Swing1_Pre1, Swing2_Pre1, Swing0_Pre2, + Swing1_Pre2, Swing0_Pre3, they are for [Boost control] and + [Swing control] setting. + Registers 0~9, bit 3:0 is [Boost control], these bits control + post cursor manual, increase the [Boost control] to increase + Pre-emphasis value. + Registers 0~9, bit 6:4 is [Swing control], these bits control + swing manual, increase [Swing control] setting to add Vp-p value + for each Swing, Pre. + Registers 10~19 are Swing0_Pre0, Swing1_Pre0, Swing2_Pre0, + Swing3_Pre0, Swing0_Pre1, Swing1_Pre1, Swing2_Pre1, Swing0_Pre2, + Swing1_Pre2, Swing0_Pre3, they are for [R select control] and + [R Termination control] setting. + Registers 10~19, bit 4:0 is [R select control], these bits are + compensation manual, increase it can enhance IO driven strength + and Vp-p. + Registers 10~19, bit 5:6 is [R termination control], these bits + adjust 50ohm impedance of DP tx termination. 00:55 ohm, + 01:50 ohm(default), 10:45 ohm, 11:40 ohm. + + analogix,lane1-swing: + $ref: /schemas/types.yaml#/definitions/uint8-array + minItems: 1 + maxItems: 20 + description: + an array of swing register setting for DP tx lane1 PHY. + DP TX lane1 swing register setting same with lane0 + swing, please refer lane0-swing property description. + + analogix,audio-enable: + type: boolean + description: let the driver enable audio HDMI codec function or not. + + aux-bus: + $ref: /schemas/display/dp-aux-bus.yaml# + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + MIPI DSI/DPI input. + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + type: object + additionalProperties: false + + properties: + remote-endpoint: true + + bus-type: + enum: [7] + default: 1 + + data-lanes: true + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Video port for panel or connector. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - vdd10-supply + - vdd18-supply + - vdd33-supply + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + encoder@58 { + compatible = "analogix,anx7625"; + reg = <0x58>; + enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>; + vdd10-supply = <&pp1000_mipibrdg>; + vdd18-supply = <&pp1800_mipibrdg>; + vdd33-supply = <&pp3300_mipibrdg>; + analogix,audio-enable; + analogix,lane0-swing = /bits/ 8 <0x14 0x54 0x64 0x74>; + analogix,lane1-swing = /bits/ 8 <0x14 0x54 0x64 0x74>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + mipi2dp_bridge_in: port@0 { + reg = <0>; + anx7625_in: endpoint { + remote-endpoint = <&mipi_dsi>; + bus-type = <7>; + data-lanes = <0 1 2 3>; + }; + }; + + mipi2dp_bridge_out: port@1 { + reg = <1>; + anx7625_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + + aux-bus { + panel { + compatible = "innolux,n125hce-gn1"; + power-supply = <&pp3300_disp_x>; + backlight = <&backlight_lcd0>; + + port { + panel_in: endpoint { + remote-endpoint = <&anx7625_out>; + }; + }; + }; + }; + }; + }; diff --git a/dts/Bindings/display/bridge/analogix,anx7814.yaml b/dts/Bindings/display/bridge/analogix,anx7814.yaml new file mode 100644 index 0000000000..4509c49673 --- /dev/null +++ b/dts/Bindings/display/bridge/analogix,anx7814.yaml @@ -0,0 +1,109 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/analogix,anx7814.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analogix ANX7814 SlimPort (Full-HD Transmitter) + +maintainers: + - Andrzej Hajda <andrzej.hajda@intel.com> + - Neil Armstrong <neil.armstrong@linaro.org> + - Robert Foss <robert.foss@linaro.org> + +properties: + compatible: + enum: + - analogix,anx7808 + - analogix,anx7812 + - analogix,anx7814 + - analogix,anx7816 + - analogix,anx7818 + + reg: + maxItems: 1 + description: I2C address of the device. + + interrupts: + maxItems: 1 + description: Should contain the INTP interrupt. + + hpd-gpios: + deprecated: true + maxItems: 1 + description: Which GPIO to use for hpd. + + pd-gpios: + maxItems: 1 + description: Which GPIO to use for power down. + + reset-gpios: + maxItems: 1 + description: Which GPIO to use for reset. + + dvdd10-supply: + description: Regulator for 1.0V digital core power. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Video port for HDMI input. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Video port for SlimPort, DisplayPort, eDP or MyDP output. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + anx7814: bridge@38 { + compatible = "analogix,anx7814"; + reg = <0x38>; + interrupt-parent = <&gpio0>; + interrupts = <99 IRQ_TYPE_LEVEL_LOW>; /* INTP */ + pd-gpios = <&pio 33 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pio 98 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + anx7814_in: endpoint { + remote-endpoint = <&hdmi0_out>; + }; + }; + + port@1 { + reg = <1>; + anx7814_out: endpoint { + remote-endpoint = <&edp_out>; + }; + }; + }; + }; + }; + +... diff --git a/dts/Bindings/display/bridge/analogix,dp.yaml b/dts/Bindings/display/bridge/analogix,dp.yaml new file mode 100644 index 0000000000..62f0521b09 --- /dev/null +++ b/dts/Bindings/display/bridge/analogix,dp.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/analogix,dp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analogix Display Port bridge + +maintainers: + - Rob Herring <robh@kernel.org> + +properties: + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: true + + clock-names: true + + phys: true + + phy-names: + const: dp + + force-hpd: + type: boolean + description: + Indicate driver need force hpd when hpd detect failed, this + is used for some eDP screen which don not have a hpd signal. + + hpd-gpios: + description: + Hotplug detect GPIO. + Indicates which GPIO should be used for hotplug detection + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Input node to receive pixel data. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Port node with one endpoint connected to a dp-connector node. + + required: + - port@0 + - port@1 + +required: + - reg + - interrupts + - clock-names + - clocks + - ports + +additionalProperties: true diff --git a/dts/Bindings/display/bridge/analogix_dp.txt b/dts/Bindings/display/bridge/analogix_dp.txt deleted file mode 100644 index 027d76c27a..0000000000 --- a/dts/Bindings/display/bridge/analogix_dp.txt +++ /dev/null @@ -1,51 +0,0 @@ -Analogix Display Port bridge bindings - -Required properties for dp-controller: - -compatible: - platform specific such as: - * "samsung,exynos5-dp" - * "rockchip,rk3288-dp" - * "rockchip,rk3399-edp" - -reg: - physical base address of the controller and length - of memory mapped region. - -interrupts: - interrupt combiner values. - -clocks: - from common clock binding: handle to dp clock. - -clock-names: - from common clock binding: Shall be "dp". - -phys: - from general PHY binding: the phandle for the PHY device. - -phy-names: - from general PHY binding: Should be "dp". - -Optional properties for dp-controller: - -force-hpd: - Indicate driver need force hpd when hpd detect failed, this - is used for some eDP screen which don't have hpd signal. - -hpd-gpios: - Hotplug detect GPIO. - Indicates which GPIO should be used for hotplug detection - -port@[X]: SoC specific port nodes with endpoint definitions as defined - in Documentation/devicetree/bindings/media/video-interfaces.txt, - please refer to the SoC specific binding document: - * Documentation/devicetree/bindings/display/exynos/exynos_dp.txt - * Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt - -[1]: Documentation/devicetree/bindings/media/video-interfaces.txt -------------------------------------------------------------------------------- - -Example: - - dp-controller { - compatible = "samsung,exynos5-dp"; - reg = <0x145b0000 0x10000>; - interrupts = <10 3>; - interrupt-parent = <&combiner>; - clocks = <&clock 342>; - clock-names = "dp"; - - phys = <&dp_phy>; - phy-names = "dp"; - }; diff --git a/dts/Bindings/display/bridge/anx6345.yaml b/dts/Bindings/display/bridge/anx6345.yaml index c211038699..514f588529 100644 --- a/dts/Bindings/display/bridge/anx6345.yaml +++ b/dts/Bindings/display/bridge/anx6345.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/display/bridge/anx6345.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Analogix ANX6345 eDP Transmitter Device Tree Bindings +title: Analogix ANX6345 eDP Transmitter maintainers: - Torsten Duwe <duwe@lst.de> @@ -26,25 +26,23 @@ properties: description: GPIO connected to active low reset dvdd12-supply: - maxItems: 1 description: Regulator for 1.2V digital core power. dvdd25-supply: - maxItems: 1 description: Regulator for 2.5V digital core power. ports: - type: object + $ref: /schemas/graph.yaml#/properties/ports properties: port@0: - type: object - description: | + $ref: /schemas/graph.yaml#/properties/port + description: Video port for LVTTL input port@1: - type: object - description: | + $ref: /schemas/graph.yaml#/properties/port + description: Video port for eDP output (panel or connector). May be omitted if EDID works reliably. @@ -63,7 +61,7 @@ additionalProperties: false examples: - | - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/dts/Bindings/display/bridge/anx7814.txt b/dts/Bindings/display/bridge/anx7814.txt deleted file mode 100644 index 17258747ff..0000000000 --- a/dts/Bindings/display/bridge/anx7814.txt +++ /dev/null @@ -1,42 +0,0 @@ -Analogix ANX7814 SlimPort (Full-HD Transmitter) ------------------------------------------------ - -The ANX7814 is an ultra-low power Full-HD (1080p60) SlimPort transmitter -designed for portable devices. - -Required properties: - - - compatible : Must be one of: - "analogix,anx7808" - "analogix,anx7812" - "analogix,anx7814" - "analogix,anx7818" - - reg : I2C address of the device - - interrupts : Should contain the INTP interrupt - - hpd-gpios : Which GPIO to use for hpd - - pd-gpios : Which GPIO to use for power down - - reset-gpios : Which GPIO to use for reset - -Optional properties: - - - dvdd10-supply : Regulator for 1.0V digital core power. - - Video port for HDMI input, using the DT bindings defined in [1]. - -[1]: Documentation/devicetree/bindings/media/video-interfaces.txt - -Example: - - anx7814: anx7814@38 { - compatible = "analogix,anx7814"; - reg = <0x38>; - interrupt-parent = <&gpio0>; - interrupts = <99 IRQ_TYPE_LEVEL_LOW>; /* INTP */ - hpd-gpios = <&pio 36 GPIO_ACTIVE_HIGH>; - pd-gpios = <&pio 33 GPIO_ACTIVE_HIGH>; - reset-gpios = <&pio 98 GPIO_ACTIVE_HIGH>; - port { - anx7814_in: endpoint { - remote-endpoint = <&hdmi0_out>; - }; - }; - }; diff --git a/dts/Bindings/display/bridge/cdns,dsi.txt b/dts/Bindings/display/bridge/cdns,dsi.txt deleted file mode 100644 index 525a4bfd86..0000000000 --- a/dts/Bindings/display/bridge/cdns,dsi.txt +++ /dev/null @@ -1,112 +0,0 @@ -Cadence DSI bridge -================== - -The Cadence DSI bridge is a DPI to DSI bridge supporting up to 4 DSI lanes. - -Required properties: -- compatible: should be set to "cdns,dsi". -- reg: physical base address and length of the controller's registers. -- interrupts: interrupt line connected to the DSI bridge. -- clocks: DSI bridge clocks. -- clock-names: must contain "dsi_p_clk" and "dsi_sys_clk". -- phys: phandle link to the MIPI D-PHY controller. -- phy-names: must contain "dphy". -- #address-cells: must be set to 1. -- #size-cells: must be set to 0. - -Optional properties: -- resets: DSI reset lines. -- reset-names: can contain "dsi_p_rst". - -Required subnodes: -- ports: Ports as described in Documentation/devicetree/bindings/graph.txt. - 2 ports are available: - * port 0: this port is only needed if some of your DSI devices are - controlled through an external bus like I2C or SPI. Can have at - most 4 endpoints. The endpoint number is directly encoding the - DSI virtual channel used by this device. - * port 1: represents the DPI input. - Other ports will be added later to support the new kind of inputs. - -- one subnode per DSI device connected on the DSI bus. Each DSI device should - contain a reg property encoding its virtual channel. - -Example: - dsi0: dsi@fd0c0000 { - compatible = "cdns,dsi"; - reg = <0x0 0xfd0c0000 0x0 0x1000>; - clocks = <&pclk>, <&sysclk>; - clock-names = "dsi_p_clk", "dsi_sys_clk"; - interrupts = <1>; - phys = <&dphy0>; - phy-names = "dphy"; - #address-cells = <1>; - #size-cells = <0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - reg = <1>; - dsi0_dpi_input: endpoint { - remote-endpoint = <&xxx_dpi_output>; - }; - }; - }; - - panel: dsi-dev@0 { - compatible = "<vendor,panel>"; - reg = <0>; - }; - }; - -or - - dsi0: dsi@fd0c0000 { - compatible = "cdns,dsi"; - reg = <0x0 0xfd0c0000 0x0 0x1000>; - clocks = <&pclk>, <&sysclk>; - clock-names = "dsi_p_clk", "dsi_sys_clk"; - interrupts = <1>; - phys = <&dphy1>; - phy-names = "dphy"; - #address-cells = <1>; - #size-cells = <0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - - dsi0_output: endpoint@0 { - reg = <0>; - remote-endpoint = <&dsi_panel_input>; - }; - }; - - port@1 { - reg = <1>; - dsi0_dpi_input: endpoint { - remote-endpoint = <&xxx_dpi_output>; - }; - }; - }; - }; - - i2c@xxx { - panel: panel@59 { - compatible = "<vendor,panel>"; - reg = <0x59>; - - port { - dsi_panel_input: endpoint { - remote-endpoint = <&dsi0_output>; - }; - }; - }; - }; diff --git a/dts/Bindings/display/bridge/cdns,dsi.yaml b/dts/Bindings/display/bridge/cdns,dsi.yaml new file mode 100644 index 0000000000..23060324d1 --- /dev/null +++ b/dts/Bindings/display/bridge/cdns,dsi.yaml @@ -0,0 +1,180 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/cdns,dsi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cadence DSI bridge + +maintainers: + - Boris Brezillon <boris.brezillon@bootlin.com> + +description: | + CDNS DSI is a bridge device which converts DPI to DSI + +properties: + compatible: + enum: + - cdns,dsi + - ti,j721e-dsi + + reg: + minItems: 1 + items: + - description: + Register block for controller's registers. + - description: + Register block for wrapper settings registers in case of TI J7 SoCs. + + clocks: + items: + - description: PSM clock, used by the IP + - description: sys clock, used by the IP + + clock-names: + items: + - const: dsi_p_clk + - const: dsi_sys_clk + + phys: + maxItems: 1 + + phy-names: + const: dphy + + interrupts: + maxItems: 1 + + resets: + maxItems: 1 + + reset-names: + const: dsi_p_rst + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Output port representing the DSI output. It can have + at most 4 endpoints. The endpoint number is directly encoding + the DSI virtual channel used by this device. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Input port representing the DPI input. + + required: + - port@1 + +allOf: + - $ref: ../dsi-controller.yaml# + + - if: + properties: + compatible: + contains: + const: ti,j721e-dsi + then: + properties: + reg: + minItems: 2 + maxItems: 2 + power-domains: + maxItems: 1 + else: + properties: + reg: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - phys + - phy-names + - ports + +unevaluatedProperties: false + +examples: + - | + bus { + #address-cells = <2>; + #size-cells = <2>; + + dsi@fd0c0000 { + compatible = "cdns,dsi"; + reg = <0x0 0xfd0c0000 0x0 0x1000>; + clocks = <&pclk>, <&sysclk>; + clock-names = "dsi_p_clk", "dsi_sys_clk"; + interrupts = <1>; + phys = <&dphy0>; + phy-names = "dphy"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&xxx_dpi_output>; + }; + }; + }; + + panel@0 { + compatible = "panasonic,vvx10f034n00"; + reg = <0>; + power-supply = <&vcc_lcd_reg>; + }; + }; + }; + + - | + bus { + #address-cells = <2>; + #size-cells = <2>; + + dsi@fd0c0000 { + compatible = "cdns,dsi"; + reg = <0x0 0xfd0c0000 0x0 0x1000>; + clocks = <&pclk>, <&sysclk>; + clock-names = "dsi_p_clk", "dsi_sys_clk"; + interrupts = <1>; + phys = <&dphy1>; + phy-names = "dphy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + endpoint@0 { + reg = <0>; + remote-endpoint = <&dsi_panel_input>; + }; + }; + + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&xxx_dpi_output>; + }; + }; + }; + }; + }; diff --git a/dts/Bindings/display/bridge/cdns,mhdp8546.yaml b/dts/Bindings/display/bridge/cdns,mhdp8546.yaml new file mode 100644 index 0000000000..c2b369456e --- /dev/null +++ b/dts/Bindings/display/bridge/cdns,mhdp8546.yaml @@ -0,0 +1,164 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/cdns,mhdp8546.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cadence MHDP8546 bridge + +maintainers: + - Swapnil Jakhade <sjakhade@cadence.com> + - Yuti Amonkar <yamonkar@cadence.com> + +properties: + compatible: + enum: + - cdns,mhdp8546 + - ti,j721e-mhdp8546 + + reg: + minItems: 1 + items: + - description: + Register block of mhdptx apb registers up to PHY mapped area (AUX_CONFIG_P). + The AUX and PMA registers are not part of this range, they are instead + included in the associated PHY. + - description: + Register block for DSS_EDP0_INTG_CFG_VP registers in case of TI J7 SoCs. + - description: + Register block of mhdptx sapb registers. + + reg-names: + minItems: 1 + items: + - const: mhdptx + - const: j721e-intg + - const: mhdptx-sapb + + clocks: + maxItems: 1 + description: + DP bridge clock, used by the IP to know how to translate a number of + clock cycles into a time (which is used to comply with DP standard timings + and delays). + + phys: + maxItems: 1 + description: + phandle to the DisplayPort PHY. + + phy-names: + items: + - const: dpphy + + power-domains: + maxItems: 1 + + interrupts: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + First input port representing the DP bridge input. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Second input port representing the DP bridge input. + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: + Third input port representing the DP bridge input. + + port@3: + $ref: /schemas/graph.yaml#/properties/port + description: + Fourth input port representing the DP bridge input. + + port@4: + $ref: /schemas/graph.yaml#/properties/port + description: + Output port representing the DP bridge output. + + required: + - port@0 + - port@4 + +allOf: + - if: + properties: + compatible: + contains: + const: ti,j721e-mhdp8546 + then: + properties: + reg: + minItems: 2 + maxItems: 3 + reg-names: + minItems: 2 + maxItems: 3 + else: + properties: + reg: + minItems: 1 + maxItems: 2 + reg-names: + minItems: 1 + maxItems: 2 + +required: + - compatible + - clocks + - reg + - reg-names + - phys + - phy-names + - interrupts + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + bus { + #address-cells = <2>; + #size-cells = <2>; + + mhdp: dp-bridge@f0fb000000 { + compatible = "cdns,mhdp8546"; + reg = <0xf0 0xfb000000 0x0 0x1000000>; + reg-names = "mhdptx"; + clocks = <&mhdp_clock>; + phys = <&dp_phy>; + phy-names = "dpphy"; + interrupts = <GIC_SPI 614 IRQ_TYPE_LEVEL_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dp_bridge_input: endpoint { + remote-endpoint = <&xxx_dpi_output>; + }; + }; + + port@4 { + reg = <4>; + dp_bridge_output: endpoint { + remote-endpoint = <&xxx_dp_connector_input>; + }; + }; + }; + }; + }; +... diff --git a/dts/Bindings/display/bridge/chipone,icn6211.yaml b/dts/Bindings/display/bridge/chipone,icn6211.yaml new file mode 100644 index 0000000000..5fb54375ae --- /dev/null +++ b/dts/Bindings/display/bridge/chipone,icn6211.yaml @@ -0,0 +1,123 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/chipone,icn6211.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Chipone ICN6211 MIPI-DSI to RGB Converter bridge + +maintainers: + - Jagan Teki <jagan@amarulasolutions.com> + +description: | + ICN6211 is MIPI-DSI to RGB Converter bridge from chipone. + + It has a flexible configuration of MIPI DSI signal input and + produce RGB565, RGB666, RGB888 output format. + +properties: + compatible: + enum: + - chipone,icn6211 + + reg: + maxItems: 1 + description: virtual channel number of a DSI peripheral + + clock-names: + const: refclk + + clocks: + maxItems: 1 + description: | + Optional external clock connected to REF_CLK input. + The clock rate must be in 10..154 MHz range. + + enable-gpios: + description: Bridge EN pin, chip is reset when EN is low. + + vdd1-supply: + description: A 1.8V/2.5V/3.3V supply that power the MIPI RX. + + vdd2-supply: + description: A 1.8V/2.5V/3.3V supply that power the PLL. + + vdd3-supply: + description: A 1.8V/2.5V/3.3V supply that power the RGB output. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Video port for MIPI DSI input + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + description: array of physical DSI data lane indexes. + minItems: 1 + items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Video port for MIPI DPI output (panel or connector). + + required: + - port@1 + +required: + - compatible + - reg + - enable-gpios + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + bridge@0 { + compatible = "chipone,icn6211"; + reg = <0>; + enable-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* LCD-RST: PL5 */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + bridge_in_dsi: endpoint { + remote-endpoint = <&dsi_out_bridge>; + }; + }; + + port@1 { + reg = <1>; + + bridge_out_panel: endpoint { + remote-endpoint = <&panel_out_bridge>; + }; + }; + }; + }; + }; diff --git a/dts/Bindings/display/bridge/chrontel,ch7033.yaml b/dts/Bindings/display/bridge/chrontel,ch7033.yaml new file mode 100644 index 0000000000..b0589fa167 --- /dev/null +++ b/dts/Bindings/display/bridge/chrontel,ch7033.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2019,2020 Lubomir Rintel <lkundrak@v3.sk> +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/chrontel,ch7033.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Chrontel CH7033 Video Encoder + +maintainers: + - Lubomir Rintel <lkundrak@v3.sk> + +properties: + compatible: + const: chrontel,ch7033 + + reg: + maxItems: 1 + description: I2C address of the device + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: | + Video port for RGB input. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: | + DVI port, should be connected to a node compatible with the + dvi-connector binding. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - ports + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + vga-dvi-encoder@76 { + compatible = "chrontel,ch7033"; + reg = <0x76>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&lcd0_rgb_out>; + }; + }; + + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&dvi_in>; + }; + }; + + }; + }; + }; diff --git a/dts/Bindings/display/bridge/dumb-vga-dac.txt b/dts/Bindings/display/bridge/dumb-vga-dac.txt deleted file mode 100644 index 164cbb15f0..0000000000 --- a/dts/Bindings/display/bridge/dumb-vga-dac.txt +++ /dev/null @@ -1,50 +0,0 @@ -Dumb RGB to VGA DAC bridge ---------------------------- - -This binding is aimed for dumb RGB to VGA DAC based bridges that do not require -any configuration. - -Required properties: - -- compatible: Must be "dumb-vga-dac" - -Required nodes: - -This device has two video ports. Their connections are modelled using the OF -graph bindings specified in Documentation/devicetree/bindings/graph.txt. - -- Video port 0 for RGB input -- Video port 1 for VGA output - -Optional properties: -- vdd-supply: Power supply for DAC - -Example -------- - -bridge { - compatible = "dumb-vga-dac"; - #address-cells = <1>; - #size-cells = <0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - vga_bridge_in: endpoint { - remote-endpoint = <&tcon0_out_vga>; - }; - }; - - port@1 { - reg = <1>; - - vga_bridge_out: endpoint { - remote-endpoint = <&vga_con_in>; - }; - }; - }; -}; diff --git a/dts/Bindings/display/bridge/dw_hdmi.txt b/dts/Bindings/display/bridge/dw_hdmi.txt deleted file mode 100644 index 33bf981fbe..0000000000 --- a/dts/Bindings/display/bridge/dw_hdmi.txt +++ /dev/null @@ -1,33 +0,0 @@ -Synopsys DesignWare HDMI TX Encoder -=================================== - -This document defines device tree properties for the Synopsys DesignWare HDMI -TX Encoder (DWC HDMI TX). It doesn't constitue a device tree binding -specification by itself but is meant to be referenced by platform-specific -device tree bindings. - -When referenced from platform device tree bindings the properties defined in -this document are defined as follows. The platform device tree bindings are -responsible for defining whether each property is required or optional. - -- reg: Memory mapped base address and length of the DWC HDMI TX registers. - -- reg-io-width: Width of the registers specified by the reg property. The - value is expressed in bytes and must be equal to 1 or 4 if specified. The - register width defaults to 1 if the property is not present. - -- interrupts: Reference to the DWC HDMI TX interrupt. - -- clocks: References to all the clocks specified in the clock-names property - as specified in Documentation/devicetree/bindings/clock/clock-bindings.txt. - -- clock-names: The DWC HDMI TX uses the following clocks. - - - "iahb" is the bus clock for either AHB and APB (mandatory). - - "isfr" is the internal register configuration clock (mandatory). - - "cec" is the HDMI CEC controller main clock (optional). - -- ports: The connectivity of the DWC HDMI TX with the rest of the system is - expressed in using ports as specified in the device graph bindings defined - in Documentation/devicetree/bindings/graph.txt. The numbering of the ports - is platform-specific. diff --git a/dts/Bindings/display/bridge/dw_mipi_dsi.txt b/dts/Bindings/display/bridge/dw_mipi_dsi.txt deleted file mode 100644 index b13adf30b8..0000000000 --- a/dts/Bindings/display/bridge/dw_mipi_dsi.txt +++ /dev/null @@ -1,32 +0,0 @@ -Synopsys DesignWare MIPI DSI host controller -============================================ - -This document defines device tree properties for the Synopsys DesignWare MIPI -DSI host controller. It doesn't constitue a device tree binding specification -by itself but is meant to be referenced by platform-specific device tree -bindings. - -When referenced from platform device tree bindings the properties defined in -this document are defined as follows. The platform device tree bindings are -responsible for defining whether each optional property is used or not. - -- reg: Memory mapped base address and length of the DesignWare MIPI DSI - host controller registers. (mandatory) - -- clocks: References to all the clocks specified in the clock-names property - as specified in [1]. (mandatory) - -- clock-names: - - "pclk" is the peripheral clock for either AHB and APB. (mandatory) - - "px_clk" is the pixel clock for the DPI/RGB input. (optional) - -- resets: References to all the resets specified in the reset-names property - as specified in [2]. (optional) - -- reset-names: string reset name, must be "apb" if used. (optional) - -- panel or bridge node: see [3]. (mandatory) - -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt -[2] Documentation/devicetree/bindings/reset/reset.txt -[3] Documentation/devicetree/bindings/display/mipi-dsi-bus.txt diff --git a/dts/Bindings/display/bridge/fsl,imx8qxp-ldb.yaml b/dts/Bindings/display/bridge/fsl,imx8qxp-ldb.yaml new file mode 100644 index 0000000000..94543006f5 --- /dev/null +++ b/dts/Bindings/display/bridge/fsl,imx8qxp-ldb.yaml @@ -0,0 +1,173 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/fsl,imx8qxp-ldb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8qm/qxp LVDS Display Bridge + +maintainers: + - Liu Ying <victor.liu@nxp.com> + +description: | + The Freescale i.MX8qm/qxp LVDS Display Bridge(LDB) has two channels. + + The i.MX8qm/qxp LDB is controlled by Control and Status Registers(CSR) module. + The CSR module, as a system controller, contains the LDB's configuration + registers. + + For i.MX8qxp LDB, each channel supports up to 24bpp parallel input color + format and can map the input to VESA or JEIDA standards. The two channels + cannot be used simultaneously, that is to say, the user should pick one of + them to use. Two LDB channels from two LDB instances can work together in + LDB split mode to support a dual link LVDS display. The channel indexes + have to be different. Channel0 outputs odd pixels and channel1 outputs + even pixels. + + For i.MX8qm LDB, each channel additionally supports up to 30bpp parallel + input color format. The two channels can be used simultaneously, either + in dual mode or split mode. In dual mode, the two channels output identical + data. In split mode, channel0 outputs odd pixels and channel1 outputs even + pixels. + + A side note is that i.MX8qm/qxp LDB is officially called pixel mapper in + the SoC reference manuals. The pixel mapper uses logic of LDBs embedded in + i.MX6qdl/sx SoCs, i.e., it is essentially based on them. To keep the naming + consistency, this binding calls it LDB. + +properties: + compatible: + enum: + - fsl,imx8qm-ldb + - fsl,imx8qxp-ldb + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + clocks: + items: + - description: pixel clock + - description: bypass clock + + clock-names: + items: + - const: pixel + - const: bypass + + power-domains: + maxItems: 1 + + fsl,companion-ldb: + $ref: /schemas/types.yaml#/definitions/phandle + description: | + A phandle which points to companion LDB which is used in LDB split mode. + +patternProperties: + "^channel@[0-1]$": + type: object + description: Represents a channel of LDB. + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + reg: + description: The channel index. + enum: [ 0, 1 ] + + phys: + description: A phandle to the phy module representing the LVDS PHY. + maxItems: 1 + + phy-names: + const: lvds_phy + + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Input port of the channel. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Output port of the channel. + + required: + - "#address-cells" + - "#size-cells" + - reg + - phys + - phy-names + + additionalProperties: false + +required: + - compatible + - "#address-cells" + - "#size-cells" + - clocks + - clock-names + - power-domains + - channel@0 + - channel@1 + +allOf: + - if: + properties: + compatible: + contains: + const: fsl,imx8qm-ldb + then: + properties: + fsl,companion-ldb: false + +additionalProperties: false + +examples: + - | + #include <dt-bindings/firmware/imx/rsrc.h> + ldb { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8qxp-ldb"; + clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_MISC2>, + <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_BYPASS>; + clock-names = "pixel", "bypass"; + power-domains = <&pd IMX_SC_R_LVDS_0>; + + channel@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + phys = <&mipi_lvds_0_phy>; + phy-names = "lvds_phy"; + + port@0 { + reg = <0>; + + mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi: endpoint { + remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0>; + }; + }; + }; + + channel@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + phys = <&mipi_lvds_0_phy>; + phy-names = "lvds_phy"; + + port@0 { + reg = <0>; + + mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi: endpoint { + remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1>; + }; + }; + }; + }; diff --git a/dts/Bindings/display/bridge/fsl,imx8qxp-pixel-combiner.yaml b/dts/Bindings/display/bridge/fsl,imx8qxp-pixel-combiner.yaml new file mode 100644 index 0000000000..50bae21221 --- /dev/null +++ b/dts/Bindings/display/bridge/fsl,imx8qxp-pixel-combiner.yaml @@ -0,0 +1,144 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/fsl,imx8qxp-pixel-combiner.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8qm/qxp Pixel Combiner + +maintainers: + - Liu Ying <victor.liu@nxp.com> + +description: | + The Freescale i.MX8qm/qxp Pixel Combiner takes two output streams from a + single display controller and manipulates the two streams to support a number + of modes(bypass, pixel combine, YUV444 to YUV422, split_RGB) configured as + either one screen, two screens, or virtual screens. The pixel combiner is + also responsible for generating some of the control signals for the pixel link + output channel. + +properties: + compatible: + enum: + - fsl,imx8qm-pixel-combiner + - fsl,imx8qxp-pixel-combiner + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: apb + + power-domains: + maxItems: 1 + +patternProperties: + "^channel@[0-1]$": + type: object + description: Represents a display stream of pixel combiner. + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + reg: + description: The display stream index. + enum: [ 0, 1 ] + + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Input endpoint of the display stream. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Output endpoint of the display stream. + + required: + - "#address-cells" + - "#size-cells" + - reg + - port@0 + - port@1 + + additionalProperties: false + +required: + - compatible + - "#address-cells" + - "#size-cells" + - reg + - clocks + - clock-names + - power-domains + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8-lpcg.h> + #include <dt-bindings/firmware/imx/rsrc.h> + pixel-combiner@56020000 { + compatible = "fsl,imx8qxp-pixel-combiner"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x56020000 0x10000>; + clocks = <&dc0_pixel_combiner_lpcg IMX_LPCG_CLK_4>; + clock-names = "apb"; + power-domains = <&pd IMX_SC_R_DC_0>; + + channel@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + port@0 { + reg = <0>; + + dc0_pixel_combiner_ch0_dc0_dpu_disp0: endpoint { + remote-endpoint = <&dc0_dpu_disp0_dc0_pixel_combiner_ch0>; + }; + }; + + port@1 { + reg = <1>; + + dc0_pixel_combiner_ch0_dc0_pixel_link0: endpoint { + remote-endpoint = <&dc0_pixel_link0_dc0_pixel_combiner_ch0>; + }; + }; + }; + + channel@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + port@0 { + reg = <0>; + + dc0_pixel_combiner_ch1_dc0_dpu_disp1: endpoint { + remote-endpoint = <&dc0_dpu_disp1_dc0_pixel_combiner_ch1>; + }; + }; + + port@1 { + reg = <1>; + + dc0_pixel_combiner_ch1_dc0_pixel_link1: endpoint { + remote-endpoint = <&dc0_pixel_link1_dc0_pixel_combiner_ch1>; + }; + }; + }; + }; diff --git a/dts/Bindings/display/bridge/fsl,imx8qxp-pixel-link.yaml b/dts/Bindings/display/bridge/fsl,imx8qxp-pixel-link.yaml new file mode 100644 index 0000000000..38ecc7926f --- /dev/null +++ b/dts/Bindings/display/bridge/fsl,imx8qxp-pixel-link.yaml @@ -0,0 +1,144 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/fsl,imx8qxp-pixel-link.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8qm/qxp Display Pixel Link + +maintainers: + - Liu Ying <victor.liu@nxp.com> + +description: | + The Freescale i.MX8qm/qxp Display Pixel Link(DPL) forms a standard + asynchronous linkage between pixel sources(display controller or + camera module) and pixel consumers(imaging or displays). + It consists of two distinct functions, a pixel transfer function and a + control interface. Multiple pixel channels can exist per one control channel. + This binding documentation is only for pixel links whose pixel sources are + display controllers. + + The i.MX8qm/qxp Display Pixel Link is accessed via System Controller Unit(SCU) + firmware. + +properties: + compatible: + enum: + - fsl,imx8qm-dc-pixel-link + - fsl,imx8qxp-dc-pixel-link + + fsl,dc-id: + $ref: /schemas/types.yaml#/definitions/uint8 + description: | + u8 value representing the display controller index that the pixel link + connects to. + + fsl,dc-stream-id: + $ref: /schemas/types.yaml#/definitions/uint8 + description: | + u8 value representing the display controller stream index that the pixel + link connects to. + enum: [0, 1] + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: The pixel link input port node from upstream video source. + + patternProperties: + "^port@[1-4]$": + $ref: /schemas/graph.yaml#/properties/port + description: The pixel link output port node to downstream bridge. + + required: + - port@0 + - port@1 + - port@2 + - port@3 + - port@4 + +allOf: + - if: + properties: + compatible: + contains: + const: fsl,imx8qxp-dc-pixel-link + then: + properties: + fsl,dc-id: + const: 0 + + - if: + properties: + compatible: + contains: + const: fsl,imx8qm-dc-pixel-link + then: + properties: + fsl,dc-id: + enum: [0, 1] + +required: + - compatible + - fsl,dc-id + - fsl,dc-stream-id + - ports + +additionalProperties: false + +examples: + - | + dc0-pixel-link0 { + compatible = "fsl,imx8qxp-dc-pixel-link"; + fsl,dc-id = /bits/ 8 <0>; + fsl,dc-stream-id = /bits/ 8 <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* from dc0 pixel combiner channel0 */ + port@0 { + reg = <0>; + + dc0_pixel_link0_dc0_pixel_combiner_ch0: endpoint { + remote-endpoint = <&dc0_pixel_combiner_ch0_dc0_pixel_link0>; + }; + }; + + /* to PXL2DPIs in MIPI/LVDS combo subsystems */ + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + dc0_pixel_link0_mipi_lvds_0_pxl2dpi: endpoint@0 { + reg = <0>; + remote-endpoint = <&mipi_lvds_0_pxl2dpi_dc0_pixel_link0>; + }; + + dc0_pixel_link0_mipi_lvds_1_pxl2dpi: endpoint@1 { + reg = <1>; + remote-endpoint = <&mipi_lvds_1_pxl2dpi_dc0_pixel_link0>; + }; + }; + + /* unused */ + port@2 { + reg = <2>; + }; + + /* unused */ + port@3 { + reg = <3>; + }; + + /* to imaging subsystem */ + port@4 { + reg = <4>; + }; + }; + }; diff --git a/dts/Bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml b/dts/Bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml new file mode 100644 index 0000000000..e4e77fad05 --- /dev/null +++ b/dts/Bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml @@ -0,0 +1,108 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/fsl,imx8qxp-pxl2dpi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8qxp Pixel Link to Display Pixel Interface + +maintainers: + - Liu Ying <victor.liu@nxp.com> + +description: | + The Freescale i.MX8qxp Pixel Link to Display Pixel Interface(PXL2DPI) + interfaces the pixel link 36-bit data output and the DSI controller’s + MIPI-DPI 24-bit data input, and inputs of LVDS Display Bridge(LDB) module + used in LVDS mode, to remap the pixel color codings between those modules. + This module is purely combinatorial. + + The i.MX8qxp PXL2DPI is controlled by Control and Status Registers(CSR) module. + The CSR module, as a system controller, contains the PXL2DPI's configuration + register. + +properties: + compatible: + const: fsl,imx8qxp-pxl2dpi + + fsl,sc-resource: + $ref: /schemas/types.yaml#/definitions/uint32 + description: The SCU resource ID associated with this PXL2DPI instance. + + power-domains: + maxItems: 1 + + fsl,companion-pxl2dpi: + $ref: /schemas/types.yaml#/definitions/phandle + description: | + A phandle which points to companion PXL2DPI which is used by downstream + LVDS Display Bridge(LDB) in split mode. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: The PXL2DPI input port node from pixel link. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: The PXL2DPI output port node to downstream bridge. + + required: + - port@0 + - port@1 + +required: + - compatible + - fsl,sc-resource + - power-domains + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/firmware/imx/rsrc.h> + pxl2dpi { + compatible = "fsl,imx8qxp-pxl2dpi"; + fsl,sc-resource = <IMX_SC_R_MIPI_0>; + power-domains = <&pd IMX_SC_R_MIPI_0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + mipi_lvds_0_pxl2dpi_dc_pixel_link0: endpoint@0 { + reg = <0>; + remote-endpoint = <&dc_pixel_link0_mipi_lvds_0_pxl2dpi>; + }; + + mipi_lvds_0_pxl2dpi_dc_pixel_link1: endpoint@1 { + reg = <1>; + remote-endpoint = <&dc_pixel_link1_mipi_lvds_0_pxl2dpi>; + }; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0: endpoint@0 { + reg = <0>; + remote-endpoint = <&mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi>; + }; + + mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1: endpoint@1 { + reg = <1>; + remote-endpoint = <&mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi>; + }; + }; + }; + }; diff --git a/dts/Bindings/display/bridge/fsl,imx93-mipi-dsi.yaml b/dts/Bindings/display/bridge/fsl,imx93-mipi-dsi.yaml new file mode 100644 index 0000000000..d6e51d0cf5 --- /dev/null +++ b/dts/Bindings/display/bridge/fsl,imx93-mipi-dsi.yaml @@ -0,0 +1,115 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/fsl,imx93-mipi-dsi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX93 specific extensions to Synopsys Designware MIPI DSI + +maintainers: + - Liu Ying <victor.liu@nxp.com> + +description: | + There is a Synopsys Designware MIPI DSI Host Controller and a Synopsys + Designware MIPI DPHY embedded in Freescale i.MX93 SoC. Some configurations + and extensions to them are controlled by i.MX93 media blk-ctrl. + +allOf: + - $ref: snps,dw-mipi-dsi.yaml# + +properties: + compatible: + const: fsl,imx93-mipi-dsi + + clocks: + items: + - description: apb clock + - description: pixel clock + - description: PHY configuration clock + - description: PHY reference clock + + clock-names: + items: + - const: pclk + - const: pix + - const: phy_cfg + - const: phy_ref + + interrupts: + maxItems: 1 + + fsl,media-blk-ctrl: + $ref: /schemas/types.yaml#/definitions/phandle + description: + i.MX93 media blk-ctrl, as a syscon, controls pixel component bit map + configurations from LCDIF display controller to the MIPI DSI host + controller and MIPI DPHY PLL related configurations through PLL SoC + interface. + + power-domains: + maxItems: 1 + +required: + - compatible + - interrupts + - fsl,media-blk-ctrl + - power-domains + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/imx93-clock.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/fsl,imx93-power.h> + + dsi@4ae10000 { + compatible = "fsl,imx93-mipi-dsi"; + reg = <0x4ae10000 0x10000>; + interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_MIPI_DSI_GATE>, + <&clk IMX93_CLK_MEDIA_DISP_PIX>, + <&clk IMX93_CLK_MIPI_PHY_CFG>, + <&clk IMX93_CLK_24M>; + clock-names = "pclk", "pix", "phy_cfg", "phy_ref"; + fsl,media-blk-ctrl = <&media_blk_ctrl>; + power-domains = <&media_blk_ctrl IMX93_MEDIABLK_PD_MIPI_DSI>; + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "raydium,rm67191"; + reg = <0>; + reset-gpios = <&adp5585gpio 6 GPIO_ACTIVE_LOW>; + dsi-lanes = <4>; + video-mode = <2>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dsi_to_lcdif: endpoint { + remote-endpoint = <&lcdif_to_dsi>; + }; + }; + + port@1 { + reg = <1>; + + dsi_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; diff --git a/dts/Bindings/display/bridge/fsl,ldb.yaml b/dts/Bindings/display/bridge/fsl,ldb.yaml new file mode 100644 index 0000000000..07388bf2b9 --- /dev/null +++ b/dts/Bindings/display/bridge/fsl,ldb.yaml @@ -0,0 +1,122 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/fsl,ldb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8MP DPI to LVDS bridge chip + +maintainers: + - Marek Vasut <marex@denx.de> + +description: | + The i.MX8MP mediamix contains two registers which are responsible + for configuring the on-SoC DPI-to-LVDS serializer. This describes + those registers as bridge within the DT. + +properties: + compatible: + enum: + - fsl,imx6sx-ldb + - fsl,imx8mp-ldb + - fsl,imx93-ldb + + clocks: + maxItems: 1 + + clock-names: + const: ldb + + reg: + maxItems: 2 + + reg-names: + items: + - const: ldb + - const: lvds + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Video port for DPI input. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Video port for LVDS Channel-A output (panel or bridge). + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: Video port for LVDS Channel-B output (panel or bridge). + + required: + - port@0 + - port@1 + +required: + - compatible + - clocks + - ports + +allOf: + - if: + properties: + compatible: + contains: + enum: + - fsl,imx6sx-ldb + - fsl,imx93-ldb + then: + properties: + ports: + properties: + port@2: false + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mp-clock.h> + + blk-ctrl { + #address-cells = <1>; + #size-cells = <1>; + + bridge@5c { + compatible = "fsl,imx8mp-ldb"; + clocks = <&clk IMX8MP_CLK_MEDIA_LDB>; + clock-names = "ldb"; + reg = <0x5c 0x4>, <0x128 0x4>; + reg-names = "ldb", "lvds"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + ldb_from_lcdif2: endpoint { + remote-endpoint = <&lcdif2_to_ldb>; + }; + }; + + port@1 { + reg = <1>; + + ldb_lvds_ch0: endpoint { + remote-endpoint = <&ldb_to_lvdsx4panel>; + }; + }; + + port@2 { + reg = <2>; + + ldb_lvds_ch1: endpoint { + }; + }; + }; + }; + }; diff --git a/dts/Bindings/display/bridge/google,cros-ec-anx7688.yaml b/dts/Bindings/display/bridge/google,cros-ec-anx7688.yaml new file mode 100644 index 0000000000..a44d025d33 --- /dev/null +++ b/dts/Bindings/display/bridge/google,cros-ec-anx7688.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/google,cros-ec-anx7688.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ChromeOS EC ANX7688 HDMI to DP Converter through Type-C Port + +maintainers: + - Nicolas Boichat <drinkcat@chromium.org> + +description: | + ChromeOS EC ANX7688 is a display bridge that converts HDMI 2.0 to + DisplayPort 1.3 Ultra-HDi (4096x2160p60). It is an Analogix ANX7688 chip + which is connected to and operated by the ChromeOS Embedded Controller + (See google,cros-ec.yaml). It is accessed using I2C tunneling through + the EC and therefore its node should be a child of an EC I2C tunnel node + (See google,cros-ec-i2c-tunnel.yaml). + +properties: + compatible: + const: google,cros-ec-anx7688 + + reg: + maxItems: 1 + description: I2C address of the device. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Video port for HDMI input. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: USB Type-c connector. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - ports + +additionalProperties: false + +examples: + - | + i2c_tunnel_b: i2c-tunnel1 { + compatible = "google,cros-ec-i2c-tunnel"; + google,remote-bus = <1>; + #address-cells = <1>; + #size-cells = <0>; + + anx7688: anx7688@2c { + compatible = "google,cros-ec-anx7688"; + reg = <0x2c>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + anx7688_in: endpoint { + remote-endpoint = <&hdmi0_out>; + }; + }; + port@1 { + reg = <1>; + anx7688_out: endpoint { + remote-endpoint = <&typec_connector>; + }; + }; + }; + }; + }; diff --git a/dts/Bindings/display/bridge/ingenic,jz4780-hdmi.yaml b/dts/Bindings/display/bridge/ingenic,jz4780-hdmi.yaml new file mode 100644 index 0000000000..0b27df429b --- /dev/null +++ b/dts/Bindings/display/bridge/ingenic,jz4780-hdmi.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/ingenic,jz4780-hdmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ingenic JZ4780 HDMI Transmitter + +maintainers: + - H. Nikolaus Schaller <hns@goldelico.com> + +description: | + The HDMI Transmitter in the Ingenic JZ4780 is a Synopsys DesignWare HDMI 1.4 + TX controller IP with accompanying PHY IP. + +allOf: + - $ref: synopsys,dw-hdmi.yaml# + +properties: + compatible: + const: ingenic,jz4780-dw-hdmi + + reg-io-width: + const: 4 + + clocks: + maxItems: 2 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Input from LCD controller output. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Link to the HDMI connector. + +required: + - compatible + - clocks + - clock-names + - ports + - reg-io-width + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/ingenic,jz4780-cgu.h> + + hdmi: hdmi@10180000 { + compatible = "ingenic,jz4780-dw-hdmi"; + reg = <0x10180000 0x8000>; + reg-io-width = <4>; + interrupt-parent = <&intc>; + interrupts = <3>; + clocks = <&cgu JZ4780_CLK_AHB0>, <&cgu JZ4780_CLK_HDMI>; + clock-names = "iahb", "isfr"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + hdmi_in: port@0 { + reg = <0>; + dw_hdmi_in: endpoint { + remote-endpoint = <&jz4780_lcd_out>; + }; + }; + hdmi_out: port@1 { + reg = <1>; + dw_hdmi_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; + +... diff --git a/dts/Bindings/display/bridge/intel,keembay-dsi.yaml b/dts/Bindings/display/bridge/intel,keembay-dsi.yaml new file mode 100644 index 0000000000..958a073f4f --- /dev/null +++ b/dts/Bindings/display/bridge/intel,keembay-dsi.yaml @@ -0,0 +1,93 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/intel,keembay-dsi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intel Keem Bay mipi dsi controller + +maintainers: + - Anitha Chrisanthus <anitha.chrisanthus@intel.com> + - Edmond J Dea <edmund.j.dea@intel.com> + +properties: + compatible: + const: intel,keembay-dsi + + reg: + items: + - description: MIPI registers range + + reg-names: + items: + - const: mipi + + clocks: + items: + - description: MIPI DSI clock + - description: MIPI DSI econfig clock + - description: MIPI DSI config clock + + clock-names: + items: + - const: clk_mipi + - const: clk_mipi_ecfg + - const: clk_mipi_cfg + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: MIPI DSI input port. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: DSI output port. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - ports + +additionalProperties: false + +examples: + - | + mipi-dsi@20900000 { + compatible = "intel,keembay-dsi"; + reg = <0x20900000 0x4000>; + reg-names = "mipi"; + clocks = <&scmi_clk 0x86>, + <&scmi_clk 0x88>, + <&scmi_clk 0x89>; + clock-names = "clk_mipi", "clk_mipi_ecfg", + "clk_mipi_cfg"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi_in: endpoint { + remote-endpoint = <&disp_out>; + }; + }; + + port@1 { + reg = <1>; + dsi_out: endpoint { + remote-endpoint = <&adv7535_input>; + }; + }; + }; + }; diff --git a/dts/Bindings/display/bridge/ite,it6505.yaml b/dts/Bindings/display/bridge/ite,it6505.yaml new file mode 100644 index 0000000000..c9a882ee6d --- /dev/null +++ b/dts/Bindings/display/bridge/ite,it6505.yaml @@ -0,0 +1,150 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/ite,it6505.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ITE it6505 + +maintainers: + - Allen Chen <allen.chen@ite.com.tw> + +description: | + The IT6505 is a high-performance DisplayPort 1.1a transmitter, + fully compliant with DisplayPort 1.1a, HDCP 1.3 specifications. + The IT6505 supports color depth of up to 36 bits (12 bits/color) + and ensures robust transmission of high-quality uncompressed video + content, along with uncompressed and compressed digital audio content. + + Aside from the various video output formats supported, the IT6505 + also encodes and transmits up to 8 channels of I2S digital audio, + with sampling rate up to 192kHz and sample size up to 24 bits. + In addition, an S/PDIF input port takes in compressed audio of up to + 192kHz frame rate. + + Each IT6505 chip comes preprogrammed with an unique HDCP key, + in compliance with the HDCP 1.3 standard so as to provide secure + transmission of high-definition content. Users of the IT6505 need not + purchase any HDCP keys or ROMs. + +properties: + compatible: + const: ite,it6505 + + reg: + maxItems: 1 + + ovdd-supply: + description: I/O voltage + + pwr18-supply: + description: core voltage + + interrupts: + maxItems: 1 + description: interrupt specifier of INT pin + + reset-gpios: + maxItems: 1 + description: gpio specifier of RESET pin + + extcon: + maxItems: 1 + description: extcon specifier for the Power Delivery + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: A port node pointing to DPI host port node + + properties: + endpoint: + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false + + properties: + link-frequencies: + minItems: 1 + maxItems: 1 + description: Allowed max link frequencies in Hz + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: Video port for DP output + + properties: + endpoint: + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + uniqueItems: true + items: + - enum: [ 0, 1 ] + - const: 1 + - const: 2 + - const: 3 + + required: + - port@0 + - port@1 + +required: + - compatible + - ovdd-supply + - pwr18-supply + - interrupts + - reset-gpios + - extcon + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + dp-bridge@5c { + compatible = "ite,it6505"; + interrupts = <152 IRQ_TYPE_EDGE_FALLING 152 0>; + reg = <0x5c>; + pinctrl-names = "default"; + pinctrl-0 = <&it6505_pins>; + ovdd-supply = <&mt6358_vsim1_reg>; + pwr18-supply = <&it6505_pp18_reg>; + reset-gpios = <&pio 179 1>; + extcon = <&usbc_extcon>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + it6505_in: endpoint { + remote-endpoint = <&dpi_out>; + link-frequencies = /bits/ 64 <150000000>; + }; + }; + + port@1 { + reg = <1>; + it6505_out: endpoint { + remote-endpoint = <&dp_in>; + data-lanes = <0 1>; + }; + }; + }; + }; + }; diff --git a/dts/Bindings/display/bridge/ite,it66121.yaml b/dts/Bindings/display/bridge/ite,it66121.yaml new file mode 100644 index 0000000000..a7eb260369 --- /dev/null +++ b/dts/Bindings/display/bridge/ite,it66121.yaml @@ -0,0 +1,129 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/ite,it66121.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ITE it66121 HDMI bridge + +maintainers: + - Phong LE <ple@baylibre.com> + - Neil Armstrong <neil.armstrong@linaro.org> + +description: | + The IT66121 is a high-performance and low-power single channel HDMI + transmitter, fully compliant with HDMI 1.3a, HDCP 1.2 and backward compatible + to DVI 1.0 specifications. + +properties: + compatible: + enum: + - ite,it66121 + - ite,it6610 + + reg: + maxItems: 1 + + reset-gpios: + maxItems: 1 + description: GPIO connected to active low reset + + vrf12-supply: + description: Regulator for 1.2V analog core power. + + vcn33-supply: + description: Regulator for 3.3V digital core power. + + vcn18-supply: + description: Regulator for 1.8V IO core power. + + interrupts: + maxItems: 1 + + "#sound-dai-cells": + const: 0 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: DPI input port. + + properties: + endpoint: + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false + + properties: + bus-width: + description: + Endpoint bus width. + enum: + - 12 # 12 data lines connected and dual-edge mode + - 24 # 24 data lines connected and single-edge mode + default: 24 + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: HDMI Connector port. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - reset-gpios + - vrf12-supply + - vcn33-supply + - vcn18-supply + - interrupts + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + it66121hdmitx: hdmitx@4c { + compatible = "ite,it66121"; + pinctrl-names = "default"; + pinctrl-0 = <&ite_pins_default>; + vcn33-supply = <&mt6358_vcn33_wifi_reg>; + vcn18-supply = <&mt6358_vcn18_reg>; + vrf12-supply = <&mt6358_vrf12_reg>; + reset-gpios = <&pio 160 GPIO_ACTIVE_LOW>; + interrupt-parent = <&pio>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + reg = <0x4c>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + it66121_in: endpoint { + bus-width = <12>; + remote-endpoint = <&display_out>; + }; + }; + + port@1 { + reg = <1>; + hdmi_conn_out: endpoint { + remote-endpoint = <&hdmi_conn_in>; + }; + }; + }; + }; + }; diff --git a/dts/Bindings/display/bridge/lontium,lt8912b.yaml b/dts/Bindings/display/bridge/lontium,lt8912b.yaml new file mode 100644 index 0000000000..2cef252157 --- /dev/null +++ b/dts/Bindings/display/bridge/lontium,lt8912b.yaml @@ -0,0 +1,124 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/lontium,lt8912b.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lontium LT8912B MIPI to HDMI Bridge + +maintainers: + - Adrien Grassein <adrien.grassein@gmail.com> + +description: | + The LT8912B is a bridge device which convert DSI to HDMI + +properties: + compatible: + enum: + - lontium,lt8912b + + reg: + maxItems: 1 + + reset-gpios: + maxItems: 1 + description: GPIO connected to active high RESET pin. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Primary MIPI port for MIPI input + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: true + + required: + - data-lanes + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: | + HDMI port, should be connected to a node compatible with the + hdmi-connector binding. + + required: + - port@0 + - port@1 + + vcchdmipll-supply: + description: A 1.8V supply that powers the HDMI PLL. + + vcchdmitx-supply: + description: A 1.8V supply that powers the HDMI TX part. + + vcclvdspll-supply: + description: A 1.8V supply that powers the LVDS PLL. + + vcclvdstx-supply: + description: A 1.8V supply that powers the LVDS TX part. + + vccmipirx-supply: + description: A 1.8V supply that powers the MIPI RX part. + + vccsysclk-supply: + description: A 1.8V supply that powers the SYSCLK. + + vdd-supply: + description: A 1.8V supply that powers the digital part. + +required: + - compatible + - reg + - reset-gpios + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + hdmi-bridge@48 { + compatible = "lontium,lt8912b"; + reg = <0x48>; + reset-gpios = <&max7323 0 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + hdmi_out_in: endpoint { + data-lanes = <0 1 2 3>; + remote-endpoint = <&mipi_dsi_out>; + }; + }; + + port@1 { + reg = <1>; + + endpoint { + remote-endpoint = <&hdmi_in>; + }; + }; + }; + }; + }; + +... diff --git a/dts/Bindings/display/bridge/lontium,lt9211.yaml b/dts/Bindings/display/bridge/lontium,lt9211.yaml new file mode 100644 index 0000000000..9a6e9b25d1 --- /dev/null +++ b/dts/Bindings/display/bridge/lontium,lt9211.yaml @@ -0,0 +1,117 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/lontium,lt9211.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lontium LT9211 DSI/LVDS/DPI to DSI/LVDS/DPI bridge. + +maintainers: + - Marek Vasut <marex@denx.de> + +description: | + The LT9211 are bridge devices which convert Single/Dual-Link DSI/LVDS + or Single DPI to Single/Dual-Link DSI/LVDS or Single DPI. + +properties: + compatible: + enum: + - lontium,lt9211 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + description: GPIO connected to active high RESET pin. + + vccio-supply: + description: Regulator for 1.8V IO power. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Primary MIPI DSI port-1 for MIPI input or + LVDS port-1 for LVDS input or DPI input. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Additional MIPI port-2 for MIPI input or LVDS port-2 + for LVDS input. Used in combination with primary + port-1 to drive higher resolution displays + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: + Primary MIPI DSI port-1 for MIPI output or + LVDS port-1 for LVDS output or DPI output. + + port@3: + $ref: /schemas/graph.yaml#/properties/port + description: + Additional MIPI port-2 for MIPI output or LVDS port-2 + for LVDS output. Used in combination with primary + port-1 to drive higher resolution displays. + + required: + - port@0 + - port@2 + +required: + - compatible + - reg + - vccio-supply + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + hdmi-bridge@3b { + compatible = "lontium,lt9211"; + reg = <0x3b>; + + reset-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>; + interrupts-extended = <&tlmm 84 IRQ_TYPE_EDGE_FALLING>; + + vccio-supply = <<9211_1v8>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@2 { + reg = <2>; + + endpoint { + remote-endpoint = <&panel_in_lvds>; + }; + }; + }; + }; + }; + +... diff --git a/dts/Bindings/display/bridge/lontium,lt9611.yaml b/dts/Bindings/display/bridge/lontium,lt9611.yaml new file mode 100644 index 0000000000..5b9d36f7af --- /dev/null +++ b/dts/Bindings/display/bridge/lontium,lt9611.yaml @@ -0,0 +1,121 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/lontium,lt9611.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lontium LT9611(UXC) 2 Port MIPI to HDMI Bridge + +maintainers: + - Vinod Koul <vkoul@kernel.org> + +description: | + The LT9611 and LT9611UXC are bridge devices which convert DSI to HDMI + +properties: + compatible: + enum: + - lontium,lt9611 + - lontium,lt9611uxc + + reg: + maxItems: 1 + + "#sound-dai-cells": + const: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + description: GPIO connected to active high RESET pin. + + vdd-supply: + description: Regulator for 1.8V MIPI phy power. + + vcc-supply: + description: Regulator for 3.3V IO power. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Primary MIPI port-1 for MIPI input + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Additional MIPI port-2 for MIPI input, used in combination + with primary MIPI port-1 to drive higher resolution displays + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: + HDMI port for HDMI output + + required: + - port@0 + - port@2 + +required: + - compatible + - reg + - interrupts + - vdd-supply + - vcc-supply + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c10 { + #address-cells = <1>; + #size-cells = <0>; + + hdmi-bridge@3b { + compatible = "lontium,lt9611"; + reg = <0x3b>; + + reset-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>; + interrupts-extended = <&tlmm 84 IRQ_TYPE_EDGE_FALLING>; + + vdd-supply = <<9611_1v8>; + vcc-supply = <<9611_3v3>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lt9611_a: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + lt9611_b: endpoint { + remote-endpoint = <&dsi1_out>; + }; + }; + + port@2 { + reg = <2>; + lt9611_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; + }; + +... diff --git a/dts/Bindings/display/bridge/lvds-codec.yaml b/dts/Bindings/display/bridge/lvds-codec.yaml index 8f373029f5..84aafcbf09 100644 --- a/dts/Bindings/display/bridge/lvds-codec.yaml +++ b/dts/Bindings/display/bridge/lvds-codec.yaml @@ -32,32 +32,47 @@ properties: compatible: oneOf: - items: - - enum: - - ti,ds90c185 # For the TI DS90C185 FPD-Link Serializer - - ti,ds90c187 # For the TI DS90C187 FPD-Link Serializer - - ti,sn75lvds83 # For the TI SN75LVDS83 FlatLink transmitter - - const: lvds-encoder # Generic LVDS encoder compatible fallback + - enum: + - ti,ds90c185 # For the TI DS90C185 FPD-Link Serializer + - ti,ds90c187 # For the TI DS90C187 FPD-Link Serializer + - ti,sn75lvds83 # For the TI SN75LVDS83 FlatLink transmitter + - const: lvds-encoder # Generic LVDS encoder compatible fallback - items: - - enum: - - ti,ds90cf384a # For the DS90CF384A FPD-Link LVDS Receiver - - const: lvds-decoder # Generic LVDS decoders compatible fallback + - enum: + - ti,ds90cf364a # For the DS90CF364A FPD-Link LVDS Receiver + - ti,ds90cf384a # For the DS90CF384A FPD-Link LVDS Receiver + - const: lvds-decoder # Generic LVDS decoders compatible fallback - enum: - - thine,thc63lvdm83d # For the THC63LVDM83D LVDS serializer + - thine,thc63lvdm83d # For the THC63LVDM83D LVDS serializer ports: - type: object - description: | - This device has two video ports. Their connections are modeled using the - OF graph bindings specified in Documentation/devicetree/bindings/graph.txt + $ref: /schemas/graph.yaml#/properties/ports + properties: port@0: - type: object + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false description: | For LVDS encoders, port 0 is the parallel input For LVDS decoders, port 0 is the LVDS input + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-mapping: + enum: + - jeida-18 + - jeida-24 + - vesa-24 + description: | + The color signals mapping order. See details in + Documentation/devicetree/bindings/display/lvds.yaml + port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | For LVDS encoders, port 1 is the LVDS output For LVDS decoders, port 1 is the parallel output @@ -66,15 +81,55 @@ properties: - port@0 - port@1 + pclk-sample: + description: + Data sampling on rising or falling edge. + enum: + - 0 # Falling edge + - 1 # Rising edge + default: 0 + powerdown-gpios: description: The GPIO used to control the power down line of this device. maxItems: 1 + power-supply: true + +allOf: + - if: + not: + properties: + compatible: + contains: + const: lvds-decoder + then: + properties: + ports: + properties: + port@0: + properties: + endpoint: + properties: + data-mapping: false + + - if: + not: + properties: + compatible: + contains: + const: lvds-encoder + then: + properties: + pclk-sample: false + required: - compatible - ports +additionalProperties: false + + examples: - | lvds-encoder { diff --git a/dts/Bindings/display/bridge/nwl-dsi.yaml b/dts/Bindings/display/bridge/nwl-dsi.yaml new file mode 100644 index 0000000000..350fb8f400 --- /dev/null +++ b/dts/Bindings/display/bridge/nwl-dsi.yaml @@ -0,0 +1,202 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/nwl-dsi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Northwest Logic MIPI-DSI controller on i.MX SoCs + +maintainers: + - Guido Gúnther <agx@sigxcpu.org> + - Robert Chiras <robert.chiras@nxp.com> + +description: | + NWL MIPI-DSI host controller found on i.MX8 platforms. This is a dsi bridge for + the SOCs NWL MIPI-DSI host controller. + +allOf: + - $ref: ../dsi-controller.yaml# + +properties: + compatible: + const: fsl,imx8mq-nwl-dsi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + assigned-clock-parents: true + assigned-clock-rates: true + assigned-clocks: true + + clocks: + items: + - description: DSI core clock + - description: RX_ESC clock (used in escape mode) + - description: TX_ESC clock (used in escape mode) + - description: PHY_REF clock + - description: LCDIF clock + + clock-names: + items: + - const: core + - const: rx_esc + - const: tx_esc + - const: phy_ref + - const: lcdif + + mux-controls: + description: + mux controller node to use for operating the input mux + + phys: + maxItems: 1 + description: + A phandle to the phy module representing the DPHY + + phy-names: + items: + - const: dphy + + power-domains: + maxItems: 1 + + resets: + items: + - description: dsi byte reset line + - description: dsi dpi reset line + - description: dsi esc reset line + - description: dsi pclk reset line + + reset-names: + items: + - const: byte + - const: dpi + - const: esc + - const: pclk + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + description: + Input port node to receive pixel data from the + display controller. Exactly one endpoint must be + specified. + properties: + endpoint@0: + $ref: /schemas/graph.yaml#/properties/endpoint + description: sub-node describing the input from LCDIF + + endpoint@1: + $ref: /schemas/graph.yaml#/properties/endpoint + description: sub-node describing the input from DCSS + + oneOf: + - required: + - endpoint@0 + - required: + - endpoint@1 + + unevaluatedProperties: false + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + DSI output port node to the panel or the next bridge + in the chain + + required: + - port@0 + - port@1 + +required: + - '#address-cells' + - '#size-cells' + - clock-names + - clocks + - compatible + - interrupts + - mux-controls + - phy-names + - phys + - ports + - reg + - reset-names + - resets + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mq-clock.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/reset/imx8mq-reset.h> + + dsi@30a00000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mq-nwl-dsi"; + reg = <0x30A00000 0x300>; + clocks = <&clk IMX8MQ_CLK_DSI_CORE>, + <&clk IMX8MQ_CLK_DSI_AHB>, + <&clk IMX8MQ_CLK_DSI_IPG_DIV>, + <&clk IMX8MQ_CLK_DSI_PHY_REF>, + <&clk IMX8MQ_CLK_LCDIF_PIXEL>; + clock-names = "core", "rx_esc", "tx_esc", "phy_ref", "lcdif"; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + mux-controls = <&mux 0>; + power-domains = <&pgc_mipi>; + resets = <&src IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N>, + <&src IMX8MQ_RESET_MIPI_DSI_DPI_RESET_N>, + <&src IMX8MQ_RESET_MIPI_DSI_ESC_RESET_N>, + <&src IMX8MQ_RESET_MIPI_DSI_PCLK_RESET_N>; + reset-names = "byte", "dpi", "esc", "pclk"; + phys = <&dphy>; + phy-names = "dphy"; + + panel@0 { + compatible = "rocktech,jh057n00900"; + reg = <0>; + vcc-supply = <®_2v8_p>; + iovcc-supply = <®_1v8_p>; + reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>; + port { + panel_in: endpoint { + remote-endpoint = <&mipi_dsi_out>; + }; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #size-cells = <0>; + #address-cells = <1>; + reg = <0>; + mipi_dsi_in: endpoint@0 { + reg = <0>; + remote-endpoint = <&lcdif_mipi_dsi>; + }; + }; + port@1 { + reg = <1>; + mipi_dsi_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; diff --git a/dts/Bindings/display/bridge/nxp,ptn3460.yaml b/dts/Bindings/display/bridge/nxp,ptn3460.yaml new file mode 100644 index 0000000000..70ec70922c --- /dev/null +++ b/dts/Bindings/display/bridge/nxp,ptn3460.yaml @@ -0,0 +1,106 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/nxp,ptn3460.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP PTN3460 eDP to LVDS bridge + +maintainers: + - Sean Paul <seanpaul@chromium.org> + +properties: + compatible: + const: nxp,ptn3460 + + reg: + description: I2C address of the bridge + maxItems: 1 + + edid-emulation: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The EDID emulation entry to use + Value Resolution Description + 0 1024x768 NXP Generic + 1 1920x1080 NXP Generic + 2 1920x1080 NXP Generic + 3 1600x900 Samsung LTM200KT + 4 1920x1080 Samsung LTM230HT + 5 1366x768 NXP Generic + 6 1600x900 ChiMei M215HGE + enum: [0, 1, 2, 3, 4, 5, 6] + + powerdown-gpios: + description: GPIO connected to the PD_N signal. + maxItems: 1 + + reset-gpios: + description: GPIO connected to the RST_N signal. + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Video port for LVDS output + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Video port for eDP input + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - edid-emulation + - powerdown-gpios + - reset-gpios + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + bridge@20 { + compatible = "nxp,ptn3460"; + reg = <0x20>; + edid-emulation = <5>; + powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpx1 5 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + bridge_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + + port@1 { + reg = <1>; + bridge_in: endpoint { + remote-endpoint = <&dp_out>; + }; + }; + }; + }; + }; + +... diff --git a/dts/Bindings/display/bridge/nxp,tda998x.yaml b/dts/Bindings/display/bridge/nxp,tda998x.yaml new file mode 100644 index 0000000000..b8e9cf6ce4 --- /dev/null +++ b/dts/Bindings/display/bridge/nxp,tda998x.yaml @@ -0,0 +1,113 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/nxp,tda998x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP TDA998x HDMI transmitter + +maintainers: + - Russell King <linux@armlinux.org.uk> + +properties: + compatible: + const: nxp,tda998x + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + video-ports: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0x230145 + maximum: 0xffffff + description: + 24 bits value which defines how the video controller output is wired to + the TDA998x input. + + audio-ports: + description: + Array of 2 values per DAI (Documentation/sound/soc/dai.rst). + The implementation allows one or two DAIs. + If two DAIs are defined, they must be of different type. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + minItems: 1 + maxItems: 2 + items: + items: + - description: | + The first value defines the DAI type: TDA998x_SPDIF or TDA998x_I2S + (see include/dt-bindings/display/tda998x.h). + enum: [ 1, 2 ] + - description: + The second value defines the tda998x AP_ENA reg content when the + DAI in question is used. + maximum: 0xff + + '#sound-dai-cells': + enum: [ 0, 1 ] + + nxp,calib-gpios: + maxItems: 1 + description: + Calibration GPIO, which must correspond with the gpio used for the + TDA998x interrupt pin. + + port: + $ref: /schemas/graph.yaml#/properties/port + description: Parallel input port + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + type: object + description: Parallel input port + + port@1: + type: object + description: HDMI output port + +required: + - compatible + - reg + +oneOf: + - required: + - port + - required: + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/display/tda998x.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + tda998x: hdmi-encoder@70 { + compatible = "nxp,tda998x"; + reg = <0x70>; + interrupt-parent = <&gpio0>; + interrupts = <27 IRQ_TYPE_EDGE_FALLING>; + video-ports = <0x230145>; + + #sound-dai-cells = <1>; + /* DAI-format / AP_ENA reg value */ + audio-ports = <TDA998x_SPDIF 0x04>, + <TDA998x_I2S 0x03>; + + port { + tda998x_in: endpoint { + remote-endpoint = <&lcdc_0>; + }; + }; + }; + }; diff --git a/dts/Bindings/display/bridge/parade,ps8622.yaml b/dts/Bindings/display/bridge/parade,ps8622.yaml new file mode 100644 index 0000000000..e6397ac204 --- /dev/null +++ b/dts/Bindings/display/bridge/parade,ps8622.yaml @@ -0,0 +1,115 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/parade,ps8622.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Parade PS8622/PS8625 DisplayPort to LVDS Converter + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +properties: + compatible: + enum: + - parade,ps8622 + - parade,ps8625 + + reg: + maxItems: 1 + + lane-count: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2] + description: Number of DP lanes to use. + + use-external-pwm: + type: boolean + description: Backlight will be controlled by an external PWM. + + reset-gpios: + maxItems: 1 + description: GPIO connected to RST_ pin. + + sleep-gpios: + maxItems: 1 + description: GPIO connected to PD_ pin. + + vdd12-supply: true + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Video port for LVDS output. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Video port for DisplayPort input. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - reset-gpios + - sleep-gpios + - ports + +allOf: + - if: + properties: + compatible: + const: parade,ps8622 + then: + properties: + lane-count: + const: 1 + else: + properties: + lane-count: + const: 2 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + lvds-bridge@48 { + compatible = "parade,ps8625"; + reg = <0x48>; + sleep-gpios = <&gpx3 5 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpy7 7 GPIO_ACTIVE_HIGH>; + lane-count = <2>; + use-external-pwm; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + bridge_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + + port@1 { + reg = <1>; + + bridge_in: endpoint { + remote-endpoint = <&dp_out>; + }; + }; + }; + }; + }; diff --git a/dts/Bindings/display/bridge/ps8622.txt b/dts/Bindings/display/bridge/ps8622.txt deleted file mode 100644 index c989c3807f..0000000000 --- a/dts/Bindings/display/bridge/ps8622.txt +++ /dev/null @@ -1,31 +0,0 @@ -ps8622-bridge bindings - -Required properties: - - compatible: "parade,ps8622" or "parade,ps8625" - - reg: first i2c address of the bridge - - sleep-gpios: OF device-tree gpio specification for PD_ pin. - - reset-gpios: OF device-tree gpio specification for RST_ pin. - -Optional properties: - - lane-count: number of DP lanes to use - - use-external-pwm: backlight will be controlled by an external PWM - - video interfaces: Device node can contain video interface port - nodes for panel according to [1]. - -[1]: Documentation/devicetree/bindings/media/video-interfaces.txt - -Example: - lvds-bridge@48 { - compatible = "parade,ps8622"; - reg = <0x48>; - sleep-gpios = <&gpc3 6 1 0 0>; - reset-gpios = <&gpc3 1 1 0 0>; - lane-count = <1>; - ports { - port@0 { - bridge_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; - }; - }; diff --git a/dts/Bindings/display/bridge/ps8640.yaml b/dts/Bindings/display/bridge/ps8640.yaml index 5dff93641b..5856450c5d 100644 --- a/dts/Bindings/display/bridge/ps8640.yaml +++ b/dts/Bindings/display/bridge/ps8640.yaml @@ -4,11 +4,10 @@ $id: http://devicetree.org/schemas/display/bridge/ps8640.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: MIPI DSI to eDP Video Format Converter Device Tree Bindings +title: MIPI DSI to eDP Video Format Converter maintainers: - Nicolas Boichat <drinkcat@chromium.org> - - Enric Balletbo i Serra <enric.balletbo@collabora.com> description: | The PS8640 is a low power MIPI-to-eDP video format converter supporting @@ -35,29 +34,26 @@ properties: description: GPIO connected to active low reset. vdd12-supply: - maxItems: 1 description: Regulator for 1.2V digital core power. vdd33-supply: - maxItems: 1 description: Regulator for 3.3V digital core power. + aux-bus: + $ref: /schemas/display/dp-aux-bus.yaml# + ports: - type: object - description: - A node containing DSI input & output port nodes with endpoint - definitions as documented in - Documentation/devicetree/bindings/media/video-interfaces.txt - Documentation/devicetree/bindings/graph.txt + $ref: /schemas/graph.yaml#/properties/ports + properties: port@0: - type: object - description: | + $ref: /schemas/graph.yaml#/properties/port + description: Video port for DSI input port@1: - type: object - description: | + $ref: /schemas/graph.yaml#/properties/port + description: Video port for eDP output (panel or connector). required: @@ -77,7 +73,7 @@ additionalProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; @@ -104,9 +100,22 @@ examples: reg = <1>; ps8640_out: endpoint { remote-endpoint = <&panel_in>; - }; + }; + }; + }; + + aux-bus { + panel { + compatible = "boe,nv133fhm-n62"; + power-supply = <&pp3300_dx_edp>; + backlight = <&backlight>; + + port { + panel_in: endpoint { + remote-endpoint = <&ps8640_out>; + }; + }; }; }; }; }; - diff --git a/dts/Bindings/display/bridge/ptn3460.txt b/dts/Bindings/display/bridge/ptn3460.txt deleted file mode 100644 index 361971ba10..0000000000 --- a/dts/Bindings/display/bridge/ptn3460.txt +++ /dev/null @@ -1,39 +0,0 @@ -ptn3460 bridge bindings - -Required properties: - - compatible: "nxp,ptn3460" - - reg: i2c address of the bridge - - powerdown-gpio: OF device-tree gpio specification for PD_N pin. - - reset-gpio: OF device-tree gpio specification for RST_N pin. - - edid-emulation: The EDID emulation entry to use - +-------+------------+------------------+ - | Value | Resolution | Description | - | 0 | 1024x768 | NXP Generic | - | 1 | 1920x1080 | NXP Generic | - | 2 | 1920x1080 | NXP Generic | - | 3 | 1600x900 | Samsung LTM200KT | - | 4 | 1920x1080 | Samsung LTM230HT | - | 5 | 1366x768 | NXP Generic | - | 6 | 1600x900 | ChiMei M215HGE | - +-------+------------+------------------+ - - - video interfaces: Device node can contain video interface port - nodes for panel according to [1]. - -[1]: Documentation/devicetree/bindings/media/video-interfaces.txt - -Example: - lvds-bridge@20 { - compatible = "nxp,ptn3460"; - reg = <0x20>; - powerdown-gpio = <&gpy2 5 1 0 0>; - reset-gpio = <&gpx1 5 1 0 0>; - edid-emulation = <5>; - ports { - port@0 { - bridge_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; - }; - }; diff --git a/dts/Bindings/display/bridge/renesas,dsi-csi2-tx.yaml b/dts/Bindings/display/bridge/renesas,dsi-csi2-tx.yaml new file mode 100644 index 0000000000..d33026f85e --- /dev/null +++ b/dts/Bindings/display/bridge/renesas,dsi-csi2-tx.yaml @@ -0,0 +1,119 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/renesas,dsi-csi2-tx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car MIPI DSI/CSI-2 Encoder + +maintainers: + - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> + +description: | + This binding describes the MIPI DSI/CSI-2 encoder embedded in the Renesas + R-Car Gen4 SoCs. The encoder can operate in either DSI or CSI-2 mode, with up + to four data lanes. + +properties: + compatible: + enum: + - renesas,r8a779a0-dsi-csi2-tx # for V3U + - renesas,r8a779g0-dsi-csi2-tx # for V4H + + reg: + maxItems: 1 + + clocks: + items: + - description: Functional clock + - description: DSI (and CSI-2) functional clock + - description: PLL reference clock + + clock-names: + items: + - const: fck + - const: dsi + - const: pll + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Parallel input port + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: DSI/CSI-2 output port + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - data-lanes + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - clocks + - power-domains + - resets + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a779a0-cpg-mssr.h> + #include <dt-bindings/power/r8a779a0-sysc.h> + + dsi0: dsi-encoder@fed80000 { + compatible = "renesas,r8a779a0-dsi-csi2-tx"; + reg = <0xfed80000 0x10000>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 415>, + <&cpg CPG_CORE R8A779A0_CLK_DSI>, + <&cpg CPG_CORE R8A779A0_CLK_CP>; + clock-names = "fck", "dsi", "pll"; + resets = <&cpg 415>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&du_out_dsi0>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + data-lanes = <1 2>; + remote-endpoint = <&sn65dsi86_in>; + }; + }; + }; + }; +... diff --git a/dts/Bindings/display/bridge/renesas,dsi.yaml b/dts/Bindings/display/bridge/renesas,dsi.yaml new file mode 100644 index 0000000000..e08c246339 --- /dev/null +++ b/dts/Bindings/display/bridge/renesas,dsi.yaml @@ -0,0 +1,183 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/renesas,dsi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/G2L MIPI DSI Encoder + +maintainers: + - Biju Das <biju.das.jz@bp.renesas.com> + +description: | + This binding describes the MIPI DSI encoder embedded in the Renesas + RZ/G2L alike family of SoC's. The encoder can operate in DSI mode, with + up to four data lanes. + +allOf: + - $ref: /schemas/display/dsi-controller.yaml# + +properties: + compatible: + items: + - enum: + - renesas,r9a07g044-mipi-dsi # RZ/G2{L,LC} + - renesas,r9a07g054-mipi-dsi # RZ/V2L + - const: renesas,rzg2l-mipi-dsi + + reg: + maxItems: 1 + + interrupts: + items: + - description: Sequence operation channel 0 interrupt + - description: Sequence operation channel 1 interrupt + - description: Video-Input operation channel 1 interrupt + - description: DSI Packet Receive interrupt + - description: DSI Fatal Error interrupt + - description: DSI D-PHY PPI interrupt + - description: Debug interrupt + + interrupt-names: + items: + - const: seq0 + - const: seq1 + - const: vin1 + - const: rcv + - const: ferr + - const: ppi + - const: debug + + clocks: + items: + - description: DSI D-PHY PLL multiplied clock + - description: DSI D-PHY system clock + - description: DSI AXI bus clock + - description: DSI Register access clock + - description: DSI Video clock + - description: DSI D-PHY Escape mode transmit clock + + clock-names: + items: + - const: pllclk + - const: sysclk + - const: aclk + - const: pclk + - const: vclk + - const: lpclk + + resets: + items: + - description: MIPI_DSI_CMN_RSTB + - description: MIPI_DSI_ARESET_N + - description: MIPI_DSI_PRESET_N + + reset-names: + items: + - const: rst + - const: arst + - const: prst + + power-domains: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Parallel input port + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: DSI output port + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + description: array of physical DSI data lane indexes. + minItems: 1 + items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + + required: + - data-lanes + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + - clock-names + - resets + - reset-names + - power-domains + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r9a07g044-cpg.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + dsi0: dsi@10850000 { + compatible = "renesas,r9a07g044-mipi-dsi", "renesas,rzg2l-mipi-dsi"; + reg = <0x10850000 0x20000>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "seq0", "seq1", "vin1", "rcv", + "ferr", "ppi", "debug"; + clocks = <&cpg CPG_MOD R9A07G044_MIPI_DSI_PLLCLK>, + <&cpg CPG_MOD R9A07G044_MIPI_DSI_SYSCLK>, + <&cpg CPG_MOD R9A07G044_MIPI_DSI_ACLK>, + <&cpg CPG_MOD R9A07G044_MIPI_DSI_PCLK>, + <&cpg CPG_MOD R9A07G044_MIPI_DSI_VCLK>, + <&cpg CPG_MOD R9A07G044_MIPI_DSI_LPCLK>; + clock-names = "pllclk", "sysclk", "aclk", "pclk", "vclk", "lpclk"; + resets = <&cpg R9A07G044_MIPI_DSI_CMN_RSTB>, + <&cpg R9A07G044_MIPI_DSI_ARESET_N>, + <&cpg R9A07G044_MIPI_DSI_PRESET_N>; + reset-names = "rst", "arst", "prst"; + power-domains = <&cpg>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&du_out_dsi0>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + data-lanes = <1 2 3 4>; + remote-endpoint = <&adv7535_in>; + }; + }; + }; + }; +... diff --git a/dts/Bindings/display/bridge/renesas,dw-hdmi.txt b/dts/Bindings/display/bridge/renesas,dw-hdmi.txt deleted file mode 100644 index 819f3e3101..0000000000 --- a/dts/Bindings/display/bridge/renesas,dw-hdmi.txt +++ /dev/null @@ -1,86 +0,0 @@ -Renesas Gen3 DWC HDMI TX Encoder -================================ - -The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP -with a companion PHY IP. - -These DT bindings follow the Synopsys DWC HDMI TX bindings defined in -Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt with the -following device-specific properties. - - -Required properties: - -- compatible : Shall contain one or more of - - "renesas,r8a774a1-hdmi" for R8A774A1 (RZ/G2M) compatible HDMI TX - - "renesas,r8a774b1-hdmi" for R8A774B1 (RZ/G2N) compatible HDMI TX - - "renesas,r8a7795-hdmi" for R8A7795 (R-Car H3) compatible HDMI TX - - "renesas,r8a7796-hdmi" for R8A7796 (R-Car M3-W) compatible HDMI TX - - "renesas,r8a77965-hdmi" for R8A77965 (R-Car M3-N) compatible HDMI TX - - "renesas,rcar-gen3-hdmi" for the generic R-Car Gen3 and RZ/G2 compatible - HDMI TX - - When compatible with generic versions, nodes must list the SoC-specific - version corresponding to the platform first, followed by the - family-specific version. - -- reg: See dw_hdmi.txt. -- interrupts: HDMI interrupt number -- clocks: See dw_hdmi.txt. -- clock-names: Shall contain "iahb" and "isfr" as defined in dw_hdmi.txt. -- ports: See dw_hdmi.txt. The DWC HDMI shall have one port numbered 0 - corresponding to the video input of the controller and one port numbered 1 - corresponding to its HDMI output, and one port numbered 2 corresponding to - sound input of the controller. Each port shall have a single endpoint. - -Optional properties: - -- power-domains: Shall reference the power domain that contains the DWC HDMI, - if any. - - -Example: - - hdmi0: hdmi@fead0000 { - compatible = "renesas,r8a7795-dw-hdmi"; - reg = <0 0xfead0000 0 0x10000>; - interrupts = <0 389 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_CORE R8A7795_CLK_S0D4>, <&cpg CPG_MOD 729>; - clock-names = "iahb", "isfr"; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - dw_hdmi0_in: endpoint { - remote-endpoint = <&du_out_hdmi0>; - }; - }; - port@1 { - reg = <1>; - rcar_dw_hdmi0_out: endpoint { - remote-endpoint = <&hdmi0_con>; - }; - }; - port@2 { - reg = <2>; - rcar_dw_hdmi0_sound_in: endpoint { - remote-endpoint = <&hdmi_sound_out>; - }; - }; - }; - }; - - hdmi0-out { - compatible = "hdmi-connector"; - label = "HDMI0 OUT"; - type = "a"; - - port { - hdmi0_con: endpoint { - remote-endpoint = <&rcar_dw_hdmi0_out>; - }; - }; - }; diff --git a/dts/Bindings/display/bridge/renesas,dw-hdmi.yaml b/dts/Bindings/display/bridge/renesas,dw-hdmi.yaml new file mode 100644 index 0000000000..e3ec697f89 --- /dev/null +++ b/dts/Bindings/display/bridge/renesas,dw-hdmi.yaml @@ -0,0 +1,130 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/renesas,dw-hdmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car DWC HDMI TX Encoder + +maintainers: + - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> + +description: | + The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP + with a companion PHY IP. + +allOf: + - $ref: synopsys,dw-hdmi.yaml# + +properties: + compatible: + items: + - enum: + - renesas,r8a774a1-hdmi # for RZ/G2M compatible HDMI TX + - renesas,r8a774b1-hdmi # for RZ/G2N compatible HDMI TX + - renesas,r8a774e1-hdmi # for RZ/G2H compatible HDMI TX + - renesas,r8a7795-hdmi # for R-Car H3 compatible HDMI TX + - renesas,r8a7796-hdmi # for R-Car M3-W compatible HDMI TX + - renesas,r8a77961-hdmi # for R-Car M3-W+ compatible HDMI TX + - renesas,r8a77965-hdmi # for R-Car M3-N compatible HDMI TX + - const: renesas,rcar-gen3-hdmi + + reg-io-width: + const: 1 + + clocks: + maxItems: 2 + + clock-names: + maxItems: 2 + + resets: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Parallel RGB input port + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: HDMI output port + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: Sound input port + + required: + - port@0 + - port@1 + - port@2 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - interrupts + - ports + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a7795-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/power/r8a7795-sysc.h> + + hdmi@fead0000 { + compatible = "renesas,r8a7795-hdmi", "renesas,rcar-gen3-hdmi"; + reg = <0xfead0000 0x10000>; + interrupts = <0 389 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_CORE R8A7795_CLK_S0D4>, <&cpg CPG_MOD 729>; + clock-names = "iahb", "isfr"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 729>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + dw_hdmi0_in: endpoint { + remote-endpoint = <&du_out_hdmi0>; + }; + }; + port@1 { + reg = <1>; + rcar_dw_hdmi0_out: endpoint { + remote-endpoint = <&hdmi0_con>; + }; + }; + port@2 { + reg = <2>; + rcar_dw_hdmi0_sound_in: endpoint { + remote-endpoint = <&hdmi_sound_out>; + }; + }; + }; + }; + + hdmi0-out { + compatible = "hdmi-connector"; + label = "HDMI0 OUT"; + type = "a"; + + port { + hdmi0_con: endpoint { + remote-endpoint = <&rcar_dw_hdmi0_out>; + }; + }; + }; + +... diff --git a/dts/Bindings/display/bridge/renesas,lvds.txt b/dts/Bindings/display/bridge/renesas,lvds.txt deleted file mode 100644 index c62ce2494e..0000000000 --- a/dts/Bindings/display/bridge/renesas,lvds.txt +++ /dev/null @@ -1,85 +0,0 @@ -Renesas R-Car LVDS Encoder -========================== - -These DT bindings describe the LVDS encoder embedded in the Renesas R-Car -Gen2, R-Car Gen3 and RZ/G SoCs. - -Required properties: - -- compatible : Shall contain one of - - "renesas,r8a7743-lvds" for R8A7743 (RZ/G1M) compatible LVDS encoders - - "renesas,r8a7744-lvds" for R8A7744 (RZ/G1N) compatible LVDS encoders - - "renesas,r8a774a1-lvds" for R8A774A1 (RZ/G2M) compatible LVDS encoders - - "renesas,r8a774b1-lvds" for R8A774B1 (RZ/G2N) compatible LVDS encoders - - "renesas,r8a774c0-lvds" for R8A774C0 (RZ/G2E) compatible LVDS encoders - - "renesas,r8a7790-lvds" for R8A7790 (R-Car H2) compatible LVDS encoders - - "renesas,r8a7791-lvds" for R8A7791 (R-Car M2-W) compatible LVDS encoders - - "renesas,r8a7793-lvds" for R8A7793 (R-Car M2-N) compatible LVDS encoders - - "renesas,r8a7795-lvds" for R8A7795 (R-Car H3) compatible LVDS encoders - - "renesas,r8a7796-lvds" for R8A7796 (R-Car M3-W) compatible LVDS encoders - - "renesas,r8a77965-lvds" for R8A77965 (R-Car M3-N) compatible LVDS encoders - - "renesas,r8a77970-lvds" for R8A77970 (R-Car V3M) compatible LVDS encoders - - "renesas,r8a77980-lvds" for R8A77980 (R-Car V3H) compatible LVDS encoders - - "renesas,r8a77990-lvds" for R8A77990 (R-Car E3) compatible LVDS encoders - - "renesas,r8a77995-lvds" for R8A77995 (R-Car D3) compatible LVDS encoders - -- reg: Base address and length for the memory-mapped registers -- clocks: A list of phandles + clock-specifier pairs, one for each entry in - the clock-names property. -- clock-names: Name of the clocks. This property is model-dependent. - - The functional clock, which mandatory for all models, shall be listed - first, and shall be named "fck". - - On R8A77990, R8A77995 and R8A774C0, the LVDS encoder can use the EXTAL or - DU_DOTCLKINx clocks. Those clocks are optional. When supplied they must be - named "extal" and "dclkin.x" respectively, with "x" being the DU_DOTCLKIN - numerical index. - - When the clocks property only contains the functional clock, the - clock-names property may be omitted. -- resets: A phandle + reset specifier for the module reset - -Required nodes: - -The LVDS encoder has two video ports. Their connections are modelled using the -OF graph bindings specified in Documentation/devicetree/bindings/graph.txt. - -- Video port 0 corresponds to the parallel RGB input -- Video port 1 corresponds to the LVDS output - -Each port shall have a single endpoint. - -Optional properties: - -- renesas,companion : phandle to the companion LVDS encoder. This property is - mandatory for the first LVDS encoder on D3 and E3 SoCs, and shall point to - the second encoder to be used as a companion in dual-link mode. It shall not - be set for any other LVDS encoder. - - -Example: - - lvds0: lvds@feb90000 { - compatible = "renesas,r8a77990-lvds"; - reg = <0 0xfeb90000 0 0x20>; - clocks = <&cpg CPG_MOD 727>; - power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; - resets = <&cpg 727>; - - renesas,companion = <&lvds1>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - lvds0_in: endpoint { - remote-endpoint = <&du_out_lvds0>; - }; - }; - port@1 { - reg = <1>; - lvds0_out: endpoint { - }; - }; - }; - }; diff --git a/dts/Bindings/display/bridge/renesas,lvds.yaml b/dts/Bindings/display/bridge/renesas,lvds.yaml new file mode 100644 index 0000000000..bb9dbfb9be --- /dev/null +++ b/dts/Bindings/display/bridge/renesas,lvds.yaml @@ -0,0 +1,235 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/renesas,lvds.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car LVDS Encoder + +maintainers: + - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> + +description: | + These DT bindings describe the LVDS encoder embedded in the Renesas R-Car + Gen2, R-Car Gen3, RZ/G1 and RZ/G2 SoCs. + +properties: + compatible: + enum: + - renesas,r8a7742-lvds # for RZ/G1H compatible LVDS encoders + - renesas,r8a7743-lvds # for RZ/G1M compatible LVDS encoders + - renesas,r8a7744-lvds # for RZ/G1N compatible LVDS encoders + - renesas,r8a774a1-lvds # for RZ/G2M compatible LVDS encoders + - renesas,r8a774b1-lvds # for RZ/G2N compatible LVDS encoders + - renesas,r8a774c0-lvds # for RZ/G2E compatible LVDS encoders + - renesas,r8a774e1-lvds # for RZ/G2H compatible LVDS encoders + - renesas,r8a7790-lvds # for R-Car H2 compatible LVDS encoders + - renesas,r8a7791-lvds # for R-Car M2-W compatible LVDS encoders + - renesas,r8a7793-lvds # for R-Car M2-N compatible LVDS encoders + - renesas,r8a7795-lvds # for R-Car H3 compatible LVDS encoders + - renesas,r8a7796-lvds # for R-Car M3-W compatible LVDS encoders + - renesas,r8a77961-lvds # for R-Car M3-W+ compatible LVDS encoders + - renesas,r8a77965-lvds # for R-Car M3-N compatible LVDS encoders + - renesas,r8a77970-lvds # for R-Car V3M compatible LVDS encoders + - renesas,r8a77980-lvds # for R-Car V3H compatible LVDS encoders + - renesas,r8a77990-lvds # for R-Car E3 compatible LVDS encoders + - renesas,r8a77995-lvds # for R-Car D3 compatible LVDS encoders + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 4 + + clock-names: + minItems: 1 + maxItems: 4 + + resets: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Parallel RGB input port + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: LVDS output port + + required: + - port@0 + - port@1 + + power-domains: + maxItems: 1 + + renesas,companion: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to the companion LVDS encoder. This property is mandatory + for the first LVDS encoder on R-Car D3 and E3, and RZ/G2E SoCs, and shall + point to the second encoder to be used as a companion in dual-link mode. + It shall not be set for any other LVDS encoder. + +required: + - compatible + - reg + - clocks + - power-domains + - resets + - ports + +if: + properties: + compatible: + enum: + - renesas,r8a774c0-lvds + - renesas,r8a77990-lvds + - renesas,r8a77995-lvds +then: + properties: + clocks: + minItems: 1 + items: + - description: Functional clock + - description: EXTAL input clock + - description: DU_DOTCLKIN0 input clock + - description: DU_DOTCLKIN1 input clock + + clock-names: + minItems: 1 + items: + - const: fck + # The LVDS encoder can use the EXTAL or DU_DOTCLKINx clocks. + # These clocks are optional. + - enum: + - extal + - dclkin.0 + - dclkin.1 + - enum: + - extal + - dclkin.0 + - dclkin.1 + - enum: + - extal + - dclkin.0 + - dclkin.1 + + required: + - clock-names + +else: + properties: + clocks: + items: + - description: Functional clock + + clock-names: + items: + - const: fck + + renesas,companion: false + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/renesas-cpg-mssr.h> + #include <dt-bindings/power/r8a7795-sysc.h> + + lvds@feb90000 { + compatible = "renesas,r8a7795-lvds"; + reg = <0xfeb90000 0x14>; + clocks = <&cpg CPG_MOD 727>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 727>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds_in: endpoint { + remote-endpoint = <&du_out_lvds0>; + }; + }; + port@1 { + reg = <1>; + lvds_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; + + - | + #include <dt-bindings/clock/renesas-cpg-mssr.h> + #include <dt-bindings/power/r8a77990-sysc.h> + + lvds0: lvds@feb90000 { + compatible = "renesas,r8a77990-lvds"; + reg = <0xfeb90000 0x20>; + clocks = <&cpg CPG_MOD 727>, + <&x13_clk>, + <&extal_clk>; + clock-names = "fck", "dclkin.0", "extal"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 727>; + + renesas,companion = <&lvds1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds0_in: endpoint { + remote-endpoint = <&du_out_lvds0>; + }; + }; + port@1 { + reg = <1>; + lvds0_out: endpoint { + remote-endpoint = <&panel_in1>; + }; + }; + }; + }; + + lvds1: lvds@feb90100 { + compatible = "renesas,r8a77990-lvds"; + reg = <0xfeb90100 0x20>; + clocks = <&cpg CPG_MOD 727>, + <&x13_clk>, + <&extal_clk>; + clock-names = "fck", "dclkin.0", "extal"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 726>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds1_in: endpoint { + remote-endpoint = <&du_out_lvds1>; + }; + }; + port@1 { + reg = <1>; + lvds1_out: endpoint { + remote-endpoint = <&panel_in2>; + }; + }; + }; + }; + +... diff --git a/dts/Bindings/display/bridge/samsung,mipi-dsim.yaml b/dts/Bindings/display/bridge/samsung,mipi-dsim.yaml new file mode 100644 index 0000000000..4ed7a799ba --- /dev/null +++ b/dts/Bindings/display/bridge/samsung,mipi-dsim.yaml @@ -0,0 +1,280 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/samsung,mipi-dsim.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung MIPI DSIM bridge controller + +maintainers: + - Inki Dae <inki.dae@samsung.com> + - Jagan Teki <jagan@amarulasolutions.com> + - Marek Szyprowski <m.szyprowski@samsung.com> + +description: | + Samsung MIPI DSIM bridge controller can be found it on Exynos + and i.MX8M Mini/Nano/Plus SoC's. + +properties: + compatible: + oneOf: + - enum: + - samsung,exynos3250-mipi-dsi + - samsung,exynos4210-mipi-dsi + - samsung,exynos5410-mipi-dsi + - samsung,exynos5422-mipi-dsi + - samsung,exynos5433-mipi-dsi + - fsl,imx8mm-mipi-dsim + - fsl,imx8mp-mipi-dsim + - items: + - const: fsl,imx8mn-mipi-dsim + - const: fsl,imx8mm-mipi-dsim + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + clocks: + minItems: 2 + maxItems: 5 + + clock-names: + minItems: 2 + maxItems: 5 + + samsung,phy-type: + $ref: /schemas/types.yaml#/definitions/uint32 + description: phandle to the samsung phy-type + + power-domains: + maxItems: 1 + + samsung,power-domain: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to the associated samsung power domain + + vddcore-supply: + description: MIPI DSIM Core voltage supply (e.g. 1.1V) + + vddio-supply: + description: MIPI DSIM I/O and PLL voltage supply (e.g. 1.8V) + + samsung,burst-clock-frequency: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + DSIM high speed burst mode frequency. If absent, + the pixel clock from the attached device or bridge + will be used instead. + + samsung,esc-clock-frequency: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + DSIM escape mode frequency. + + samsung,pll-clock-frequency: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + DSIM oscillator clock frequency. If absent, the clock frequency + of sclk_mipi will be used instead. + + phys: + maxItems: 1 + + phy-names: + const: dsim + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Input port node to receive pixel data from the + display controller. Exactly one endpoint must be + specified. + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + DSI output port node to the panel or the next bridge + in the chain. + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + uniqueItems: true + items: + enum: [ 1, 2, 3, 4 ] + + lane-polarities: + minItems: 1 + maxItems: 5 + description: + The Samsung MIPI DSI IP requires that all the data lanes have + the same polarity. + + dependencies: + lane-polarities: [data-lanes] + +required: + - clock-names + - clocks + - compatible + - interrupts + - reg + - samsung,esc-clock-frequency + +allOf: + - $ref: ../dsi-controller.yaml# + - if: + properties: + compatible: + contains: + const: samsung,exynos5433-mipi-dsi + + then: + properties: + clocks: + minItems: 5 + + clock-names: + items: + - const: bus_clk + - const: phyclk_mipidphy0_bitclkdiv8 + - const: phyclk_mipidphy0_rxclkesc0 + - const: sclk_rgb_vclk_to_dsim0 + - const: sclk_mipi + + ports: + required: + - port@0 + + required: + - ports + - vddcore-supply + - vddio-supply + + - if: + properties: + compatible: + contains: + const: samsung,exynos5410-mipi-dsi + + then: + properties: + clocks: + minItems: 2 + + clock-names: + items: + - const: bus_clk + - const: pll_clk + + required: + - vddcore-supply + - vddio-supply + + - if: + properties: + compatible: + contains: + const: samsung,exynos4210-mipi-dsi + + then: + properties: + clocks: + minItems: 2 + + clock-names: + items: + - const: bus_clk + - const: sclk_mipi + + required: + - vddcore-supply + - vddio-supply + + - if: + properties: + compatible: + contains: + const: samsung,exynos3250-mipi-dsi + + then: + properties: + clocks: + minItems: 2 + + clock-names: + items: + - const: bus_clk + - const: pll_clk + + required: + - vddcore-supply + - vddio-supply + - samsung,phy-type + +additionalProperties: + type: object + +examples: + - | + #include <dt-bindings/clock/exynos5433.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + dsi@13900000 { + compatible = "samsung,exynos5433-mipi-dsi"; + reg = <0x13900000 0xC0>; + interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>; + phys = <&mipi_phy 1>; + phy-names = "dsim"; + clocks = <&cmu_disp CLK_PCLK_DSIM0>, + <&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8>, + <&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0>, + <&cmu_disp CLK_SCLK_RGB_VCLK_TO_DSIM0>, + <&cmu_disp CLK_SCLK_DSIM0>; + clock-names = "bus_clk", + "phyclk_mipidphy0_bitclkdiv8", + "phyclk_mipidphy0_rxclkesc0", + "sclk_rgb_vclk_to_dsim0", + "sclk_mipi"; + power-domains = <&pd_disp>; + vddcore-supply = <&ldo6_reg>; + vddio-supply = <&ldo7_reg>; + samsung,burst-clock-frequency = <512000000>; + samsung,esc-clock-frequency = <16000000>; + samsung,pll-clock-frequency = <24000000>; + pinctrl-names = "default"; + pinctrl-0 = <&te_irq>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dsi_to_mic: endpoint { + remote-endpoint = <&mic_to_dsi>; + }; + }; + }; + }; diff --git a/dts/Bindings/display/bridge/sii902x.txt b/dts/Bindings/display/bridge/sii902x.txt deleted file mode 100644 index 6e14e087c0..0000000000 --- a/dts/Bindings/display/bridge/sii902x.txt +++ /dev/null @@ -1,74 +0,0 @@ -sii902x HDMI bridge bindings - -Required properties: - - compatible: "sil,sii9022" - - reg: i2c address of the bridge - -Optional properties: - - interrupts: describe the interrupt line used to inform the host - about hotplug events. - - reset-gpios: OF device-tree gpio specification for RST_N pin. - - HDMI audio properties: - - #sound-dai-cells: <0> or <1>. <0> if only i2s or spdif pin - is wired, <1> if the both are wired. HDMI audio is - configured only if this property is found. - - sil,i2s-data-lanes: Array of up to 4 integers with values of 0-3 - Each integer indicates which i2s pin is connected to which - audio fifo. The first integer selects i2s audio pin for the - first audio fifo#0 (HDMI channels 1&2), second for fifo#1 - (HDMI channels 3&4), and so on. There is 4 fifos and 4 i2s - pins (SD0 - SD3). Any i2s pin can be connected to any fifo, - but there can be no gaps. E.g. an i2s pin must be mapped to - fifo#0 and fifo#1 before mapping a channel to fifo#2. Default - value is <0>, describing SD0 pin beiging routed to hdmi audio - fifo #0. - - clocks: phandle and clock specifier for each clock listed in - the clock-names property - - clock-names: "mclk" - Describes SII902x MCLK input. MCLK can be used to produce - HDMI audio CTS values. This property follows - Documentation/devicetree/bindings/clock/clock-bindings.txt - consumer binding. - - If HDMI audio is configured the sii902x device becomes an I2S - and/or spdif audio codec component (e.g a digital audio sink), - that can be used in configuring a full audio devices with - simple-card or audio-graph-card binding. See their binding - documents on how to describe the way the sii902x device is - connected to the rest of the audio system: - Documentation/devicetree/bindings/sound/simple-card.txt - Documentation/devicetree/bindings/sound/audio-graph-card.txt - Note: In case of the audio-graph-card binding the used port - index should be 3. - -Optional subnodes: - - video input: this subnode can contain a video input port node - to connect the bridge to a display controller output (See this - documentation [1]). - -[1]: Documentation/devicetree/bindings/media/video-interfaces.txt - -Example: - hdmi-bridge@39 { - compatible = "sil,sii9022"; - reg = <0x39>; - reset-gpios = <&pioA 1 0>; - - #sound-dai-cells = <0>; - sil,i2s-data-lanes = < 0 1 2 >; - clocks = <&mclk>; - clock-names = "mclk"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - bridge_in: endpoint { - remote-endpoint = <&dc_out>; - }; - }; - }; - }; diff --git a/dts/Bindings/display/bridge/sii9234.txt b/dts/Bindings/display/bridge/sii9234.txt deleted file mode 100644 index a55bf77bd9..0000000000 --- a/dts/Bindings/display/bridge/sii9234.txt +++ /dev/null @@ -1,49 +0,0 @@ -Silicon Image SiI9234 HDMI/MHL bridge bindings - -Required properties: - - compatible : "sil,sii9234". - - reg : I2C address for TPI interface, use 0x39 - - avcc33-supply : MHL/USB Switch Supply Voltage (3.3V) - - iovcc18-supply : I/O Supply Voltage (1.8V) - - avcc12-supply : TMDS Analog Supply Voltage (1.2V) - - cvcc12-supply : Digital Core Supply Voltage (1.2V) - - interrupts: interrupt specifier of INT pin - - reset-gpios: gpio specifier of RESET pin (active low) - - video interfaces: Device node can contain two video interface port - nodes for HDMI encoder and connector according to [1]. - - port@0 - MHL to HDMI - - port@1 - MHL to connector - -[1]: Documentation/devicetree/bindings/media/video-interfaces.txt - - -Example: - sii9234@39 { - compatible = "sil,sii9234"; - reg = <0x39>; - avcc33-supply = <&vcc33mhl>; - iovcc18-supply = <&vcc18mhl>; - avcc12-supply = <&vsil12>; - cvcc12-supply = <&vsil12>; - reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>; - interrupt-parent = <&gpf3>; - interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - mhl_to_hdmi: endpoint { - remote-endpoint = <&hdmi_to_mhl>; - }; - }; - port@1 { - reg = <1>; - mhl_to_connector: endpoint { - remote-endpoint = <&connector_to_mhl>; - }; - }; - }; - }; diff --git a/dts/Bindings/display/bridge/sil,sii8620.yaml b/dts/Bindings/display/bridge/sil,sii8620.yaml new file mode 100644 index 0000000000..6d1a36b76f --- /dev/null +++ b/dts/Bindings/display/bridge/sil,sii8620.yaml @@ -0,0 +1,108 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/sil,sii8620.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Silicon Image SiI8620 HDMI/MHL bridge + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +properties: + compatible: + const: sil,sii8620 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: xtal + + cvcc10-supply: + description: Digital Core Supply Voltage (1.0V) + + interrupts: + maxItems: 1 + + iovcc18-supply: + description: I/O Supply Voltage (1.8V) + + reset-gpios: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + unevaluatedProperties: false + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Video port for HDMI (encoder) input + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + MHL to connector port + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - clocks + - cvcc10-supply + - interrupts + - iovcc18-supply + - reset-gpios + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + bridge@39 { + reg = <0x39>; + compatible = "sil,sii8620"; + cvcc10-supply = <&ldo36_reg>; + iovcc18-supply = <&ldo34_reg>; + interrupt-parent = <&gpf0>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; + reset-gpios = <&gpv7 0 GPIO_ACTIVE_LOW>; + clocks = <&pmu_system_controller 0>; + clock-names = "xtal"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mhl_to_hdmi: endpoint { + remote-endpoint = <&hdmi_to_mhl>; + }; + }; + + port@1 { + reg = <1>; + mhl_to_musb_con: endpoint { + remote-endpoint = <&musb_con_to_mhl>; + }; + }; + }; + }; + }; diff --git a/dts/Bindings/display/bridge/sil,sii9022.yaml b/dts/Bindings/display/bridge/sil,sii9022.yaml new file mode 100644 index 0000000000..5a69547ad3 --- /dev/null +++ b/dts/Bindings/display/bridge/sil,sii9022.yaml @@ -0,0 +1,131 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/sil,sii9022.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Silicon Image sii902x HDMI bridge + +maintainers: + - Boris Brezillon <bbrezillon@kernel.org> + +properties: + compatible: + oneOf: + - items: + - enum: + - sil,sii9022-cpi # CEC Programming Interface + - sil,sii9022-tpi # Transmitter Programming Interface + - const: sil,sii9022 + - const: sil,sii9022 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + description: Interrupt line used to inform the host about hotplug events. + + reset-gpios: + maxItems: 1 + + iovcc-supply: + description: I/O Supply Voltage (1.8V or 3.3V) + + cvcc12-supply: + description: Digital Core Supply Voltage (1.2V) + + '#sound-dai-cells': + enum: [ 0, 1 ] + description: | + <0> if only I2S or S/PDIF pin is wired, + <1> if both are wired. + HDMI audio is configured only if this property is found. + If HDMI audio is configured, the sii902x device becomes an I2S and/or + S/PDIF audio codec component (e.g. a digital audio sink), that can be + used in configuring full audio devices with simple-card or + audio-graph-card bindings. See their binding documents on how to describe + the way the + sii902x device is connected to the rest of the audio system: + Documentation/devicetree/bindings/sound/simple-card.yaml + Documentation/devicetree/bindings/sound/audio-graph-card.yaml + Note: In case of the audio-graph-card binding the used port index should + be 3. + + sil,i2s-data-lanes: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 4 + uniqueItems: true + items: + enum: [ 0, 1, 2, 3 ] + description: + Each integer indicates which I2S pin is connected to which audio FIFO. + The first integer selects the I2S audio pin for the first audio FIFO#0 + (HDMI channels 1&2), the second for FIFO#1 (HDMI channels 3&4), and so + on. There are 4 FIFOs and 4 I2S pins (SD0 - SD3). Any I2S pin can be + connected to any FIFO, but there can be no gaps. E.g. an I2S pin must be + mapped to FIFO#0 and FIFO#1 before mapping a channel to FIFO#2. The + default value is <0>, describing SD0 pin being routed to HDMI audio + FIFO#0. + + clocks: + maxItems: 1 + description: MCLK input. MCLK can be used to produce HDMI audio CTS values. + + clock-names: + const: mclk + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Parallel RGB input port + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: HDMI output port + + port@3: + $ref: /schemas/graph.yaml#/properties/port + description: Sound input port + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + hdmi-bridge@39 { + compatible = "sil,sii9022"; + reg = <0x39>; + reset-gpios = <&pioA 1 0>; + iovcc-supply = <&v3v3_hdmi>; + cvcc12-supply = <&v1v2_hdmi>; + + #sound-dai-cells = <0>; + sil,i2s-data-lanes = < 0 1 2 >; + clocks = <&mclk>; + clock-names = "mclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + bridge_in: endpoint { + remote-endpoint = <&dc_out>; + }; + }; + }; + }; + }; diff --git a/dts/Bindings/display/bridge/sil,sii9234.yaml b/dts/Bindings/display/bridge/sil,sii9234.yaml new file mode 100644 index 0000000000..176181d255 --- /dev/null +++ b/dts/Bindings/display/bridge/sil,sii9234.yaml @@ -0,0 +1,110 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/sil,sii9234.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Silicon Image SiI9234 HDMI/MHL bridge + +maintainers: + - Maciej Purski <m.purski@samsung.com> + +properties: + compatible: + const: sil,sii9234 + + reg: + description: I2C address for TPI interface + maxItems: 1 + + avcc12-supply: + description: TMDS Analog Supply Voltage, 1.2V + + avcc33-supply: + description: MHL/USB Switch Supply Voltage, 3.3V + + cvcc12-supply: + description: Digital Core Supply Voltage, 1.2V + + iovcc18-supply: + description: I/O voltage supply, 1.8V + + interrupts: + maxItems: 1 + + reset-gpios: + description: GPIO connected to the reset pin. + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Video port for HDMI (encoder) input + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + MHL to connector port + + required: + - port@0 + +required: + - compatible + - reg + - avcc12-supply + - avcc33-supply + - cvcc12-supply + - iovcc18-supply + - interrupts + - reset-gpios + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + bridge@39 { + compatible = "sil,sii9234"; + reg = <0x39>; + avcc12-supply = <&vsil12>; + avcc33-supply = <&vcc33mhl>; + cvcc12-supply = <&vsil12>; + iovcc18-supply = <&vcc18mhl>; + interrupt-parent = <&gpf3>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mhl_to_hdmi: endpoint { + remote-endpoint = <&hdmi_to_mhl>; + }; + }; + + port@1 { + reg = <1>; + mhl_to_connector: endpoint { + remote-endpoint = <&connector_to_mhl>; + }; + }; + }; + }; + }; + +... diff --git a/dts/Bindings/display/bridge/sil-sii8620.txt b/dts/Bindings/display/bridge/sil-sii8620.txt deleted file mode 100644 index b05052f7d6..0000000000 --- a/dts/Bindings/display/bridge/sil-sii8620.txt +++ /dev/null @@ -1,33 +0,0 @@ -Silicon Image SiI8620 HDMI/MHL bridge bindings - -Required properties: - - compatible: "sil,sii8620" - - reg: i2c address of the bridge - - cvcc10-supply: Digital Core Supply Voltage (1.0V) - - iovcc18-supply: I/O Supply Voltage (1.8V) - - interrupts: interrupt specifier of INT pin - - reset-gpios: gpio specifier of RESET pin - - clocks, clock-names: specification and name of "xtal" clock - - video interfaces: Device node can contain video interface port - node for HDMI encoder according to [1]. - -[1]: Documentation/devicetree/bindings/media/video-interfaces.txt - -Example: - sii8620@39 { - reg = <0x39>; - compatible = "sil,sii8620"; - cvcc10-supply = <&ldo36_reg>; - iovcc18-supply = <&ldo34_reg>; - interrupt-parent = <&gpf0>; - interrupts = <2 0>; - reset-gpio = <&gpv7 0 0>; - clocks = <&pmu_system_controller 0>; - clock-names = "xtal"; - - port { - mhl_to_hdmi: endpoint { - remote-endpoint = <&hdmi_to_mhl>; - }; - }; - }; diff --git a/dts/Bindings/display/bridge/simple-bridge.yaml b/dts/Bindings/display/bridge/simple-bridge.yaml new file mode 100644 index 0000000000..43cf4df981 --- /dev/null +++ b/dts/Bindings/display/bridge/simple-bridge.yaml @@ -0,0 +1,91 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/simple-bridge.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Transparent non-programmable DRM bridges + +maintainers: + - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> + - Maxime Ripard <mripard@kernel.org> + +description: | + This binding supports transparent non-programmable bridges that don't require + any configuration, with a single input and a single output. + +properties: + compatible: + oneOf: + - items: + - enum: + - ti,ths8134a + - ti,ths8134b + - const: ti,ths8134 + - items: + - const: corpro,gm7123 + - const: adi,adv7123 + - enum: + - adi,adv7123 + - dumb-vga-dac + - ti,opa362 + - ti,ths8134 + - ti,ths8135 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: The bridge input + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: The bridge output + + required: + - port@0 + - port@1 + + enable-gpios: + maxItems: 1 + description: GPIO controlling bridge enable + + vdd-supply: + description: Power supply for the bridge + +required: + - compatible + - ports + +additionalProperties: false + +examples: + - | + bridge { + compatible = "ti,ths8134a", "ti,ths8134"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + vga_bridge_in: endpoint { + remote-endpoint = <&tcon0_out_vga>; + }; + }; + + port@1 { + reg = <1>; + + vga_bridge_out: endpoint { + remote-endpoint = <&vga_con_in>; + }; + }; + }; + }; + +... diff --git a/dts/Bindings/display/bridge/snps,dw-mipi-dsi.yaml b/dts/Bindings/display/bridge/snps,dw-mipi-dsi.yaml new file mode 100644 index 0000000000..8747b95ec2 --- /dev/null +++ b/dts/Bindings/display/bridge/snps,dw-mipi-dsi.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/snps,dw-mipi-dsi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synopsys DesignWare MIPI DSI host controller + +maintainers: + - Philippe CORNU <philippe.cornu@foss.st.com> + +description: | + This document defines device tree properties for the Synopsys DesignWare MIPI + DSI host controller. It doesn't constitute a device tree binding specification + by itself but is meant to be referenced by platform-specific device tree + bindings. + + When referenced from platform device tree bindings the properties defined in + this document are defined as follows. The platform device tree bindings are + responsible for defining whether each property is required or optional. + +allOf: + - $ref: ../dsi-controller.yaml# + +properties: + reg: + maxItems: 1 + + clocks: true + + clock-names: true + + resets: + maxItems: 1 + + reset-names: + const: apb + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Input node to receive pixel data. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: DSI output node to panel. + + required: + - port@0 + - port@1 + +required: + - clock-names + - clocks + - ports + - reg + +additionalProperties: true diff --git a/dts/Bindings/display/bridge/synopsys,dw-hdmi.yaml b/dts/Bindings/display/bridge/synopsys,dw-hdmi.yaml new file mode 100644 index 0000000000..4b7e54a8f0 --- /dev/null +++ b/dts/Bindings/display/bridge/synopsys,dw-hdmi.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/synopsys,dw-hdmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common Properties for Synopsys DesignWare HDMI TX Controller + +maintainers: + - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> + +description: | + This document defines device tree properties for the Synopsys DesignWare HDMI + TX controller (DWC HDMI TX) IP core. It doesn't constitute a full device tree + binding specification by itself but is meant to be referenced by device tree + bindings for the platform-specific integrations of the DWC HDMI TX. + + When referenced from platform device tree bindings the properties defined in + this document are defined as follows. The platform device tree bindings are + responsible for defining whether each property is required or optional. + +properties: + reg: + maxItems: 1 + + reg-io-width: + description: + Width (in bytes) of the registers specified by the reg property. + enum: [1, 4] + default: 1 + + clocks: + minItems: 2 + maxItems: 5 + items: + - description: The bus clock for either AHB and APB + - description: The internal register configuration clock + additionalItems: true + + clock-names: + minItems: 2 + maxItems: 5 + items: + - const: iahb + - const: isfr + additionalItems: true + + interrupts: + maxItems: 1 + +additionalProperties: true + +... diff --git a/dts/Bindings/display/bridge/tda998x.txt b/dts/Bindings/display/bridge/tda998x.txt deleted file mode 100644 index f5a02f61dd..0000000000 --- a/dts/Bindings/display/bridge/tda998x.txt +++ /dev/null @@ -1,54 +0,0 @@ -Device-Tree bindings for the NXP TDA998x HDMI transmitter - -Required properties; - - compatible: must be "nxp,tda998x" - - - reg: I2C address - -Required node: - - port: Input port node with endpoint definition, as described - in Documentation/devicetree/bindings/graph.txt - -Optional properties: - - interrupts: interrupt number and trigger type - default: polling - - - pinctrl-0: pin control group to be used for - screen plug/unplug interrupt. - - - pinctrl-names: must contain a "default" entry. - - - video-ports: 24 bits value which defines how the video controller - output is wired to the TDA998x input - default: <0x230145> - - - audio-ports: array of 8-bit values, 2 values per one DAI[1]. - The first value defines the DAI type: TDA998x_SPDIF or TDA998x_I2S[2]. - The second value defines the tda998x AP_ENA reg content when the DAI - in question is used. The implementation allows one or two DAIs. If two - DAIs are defined, they must be of different type. - - - nxp,calib-gpios: calibration GPIO, which must correspond with the - gpio used for the TDA998x interrupt pin. - -[1] Documentation/sound/soc/dai.rst -[2] include/dt-bindings/display/tda998x.h - -Example: - -#include <dt-bindings/display/tda998x.h> - - tda998x: hdmi-encoder { - compatible = "nxp,tda998x"; - reg = <0x70>; - interrupt-parent = <&gpio0>; - interrupts = <27 2>; /* falling edge */ - pinctrl-0 = <&pmx_camera>; - pinctrl-names = "default"; - video-ports = <0x230145>; - - #sound-dai-cells = <2>; - /* DAI-format AP_ENA reg value */ - audio-ports = < TDA998x_SPDIF 0x04 - TDA998x_I2S 0x03>; - - }; diff --git a/dts/Bindings/display/bridge/thine,thc63lvd1024.txt b/dts/Bindings/display/bridge/thine,thc63lvd1024.txt deleted file mode 100644 index d17d1e5820..0000000000 --- a/dts/Bindings/display/bridge/thine,thc63lvd1024.txt +++ /dev/null @@ -1,66 +0,0 @@ -Thine Electronics THC63LVD1024 LVDS decoder -------------------------------------------- - -The THC63LVD1024 is a dual link LVDS receiver designed to convert LVDS streams -to parallel data outputs. The chip supports single/dual input/output modes, -handling up to two LVDS input streams and up to two digital CMOS/TTL outputs. - -Single or dual operation mode, output data mapping and DDR output modes are -configured through input signals and the chip does not expose any control bus. - -Required properties: -- compatible: Shall be "thine,thc63lvd1024" -- vcc-supply: Power supply for TTL output, TTL CLOCKOUT signal, LVDS input, - PPL and digital circuitry - -Optional properties: -- powerdown-gpios: Power down GPIO signal, pin name "/PDWN". Active low -- oe-gpios: Output enable GPIO signal, pin name "OE". Active high - -The THC63LVD1024 video port connections are modeled according -to OF graph bindings specified by Documentation/devicetree/bindings/graph.txt - -Required video port nodes: -- port@0: First LVDS input port -- port@2: First digital CMOS/TTL parallel output - -Optional video port nodes: -- port@1: Second LVDS input port -- port@3: Second digital CMOS/TTL parallel output - -The device can operate in single-link mode or dual-link mode. In single-link -mode, all pixels are received on port@0, and port@1 shall not contain any -endpoint. In dual-link mode, even-numbered pixels are received on port@0 and -odd-numbered pixels on port@1, and both port@0 and port@1 shall contain -endpoints. - -Example: --------- - - thc63lvd1024: lvds-decoder { - compatible = "thine,thc63lvd1024"; - - vcc-supply = <®_lvds_vcc>; - powerdown-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - lvds_dec_in_0: endpoint { - remote-endpoint = <&lvds_out>; - }; - }; - - port@2{ - reg = <2>; - - lvds_dec_out_2: endpoint { - remote-endpoint = <&adv7511_in>; - }; - }; - }; - }; diff --git a/dts/Bindings/display/bridge/thine,thc63lvd1024.yaml b/dts/Bindings/display/bridge/thine,thc63lvd1024.yaml new file mode 100644 index 0000000000..8ae382429d --- /dev/null +++ b/dts/Bindings/display/bridge/thine,thc63lvd1024.yaml @@ -0,0 +1,115 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/thine,thc63lvd1024.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Thine Electronics THC63LVD1024 LVDS Decoder + +maintainers: + - Jacopo Mondi <jacopo+renesas@jmondi.org> + - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> + +description: | + The THC63LVD1024 is a dual link LVDS receiver designed to convert LVDS + streams to parallel data outputs. The chip supports single/dual input/output + modes, handling up to two LVDS input streams and up to two digital CMOS/TTL + outputs. + + Single or dual operation mode, output data mapping and DDR output modes are + configured through input signals and the chip does not expose any control + bus. + +properties: + compatible: + const: thine,thc63lvd1024 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: | + The device can operate in single or dual input and output modes. + + When operating in single input mode, all pixels are received on port@0, + and port@1 shall not contain any endpoint. In dual input mode, + even-numbered pixels are received on port@0 and odd-numbered pixels on + port@1, and both port@0 and port@1 shall contain endpoints. + + When operating in single output mode all pixels are output from the first + CMOS/TTL port and port@3 shall not contain any endpoint. In dual output + mode pixels are output from both CMOS/TTL ports and both port@2 and + port@3 shall contain endpoints. + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: First LVDS input port + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Second LVDS input port + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: First digital CMOS/TTL parallel output + + port@3: + $ref: /schemas/graph.yaml#/properties/port + description: Second digital CMOS/TTL parallel output + + required: + - port@0 + - port@2 + + oe-gpios: + maxItems: 1 + description: Output enable GPIO signal, pin name "OE", active high. + + powerdown-gpios: + maxItems: 1 + description: Power down GPIO signal, pin name "/PDWN", active low. + + vcc-supply: + description: + Power supply for the TTL output, TTL CLOCKOUT signal, LVDS input, PLL and + digital circuitry. + +required: + - compatible + - ports + - vcc-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + lvds-decoder { + compatible = "thine,thc63lvd1024"; + + vcc-supply = <®_lvds_vcc>; + powerdown-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lvds_dec_in_0: endpoint { + remote-endpoint = <&lvds_out>; + }; + }; + + port@2 { + reg = <2>; + + lvds_dec_out_2: endpoint { + remote-endpoint = <&adv7511_in>; + }; + }; + }; + }; + +... diff --git a/dts/Bindings/display/bridge/ti,dlpc3433.yaml b/dts/Bindings/display/bridge/ti,dlpc3433.yaml new file mode 100644 index 0000000000..d3f84d2207 --- /dev/null +++ b/dts/Bindings/display/bridge/ti,dlpc3433.yaml @@ -0,0 +1,117 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/ti,dlpc3433.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI DLPC3433 MIPI DSI to DMD bridge + +maintainers: + - Jagan Teki <jagan@amarulasolutions.com> + - Christopher Vollo <chris@renewoutreach.org> + +description: | + TI DLPC3433 is a MIPI DSI based display controller bridge + for processing high resolution DMD based projectors. + + It has a flexible configuration of MIPI DSI and DPI signal + input that produces a DMD output in RGB565, RGB666, RGB888 + formats. + + It supports upto 720p resolution with 60 and 120 Hz refresh + rates. + +properties: + compatible: + const: ti,dlpc3433 + + reg: + enum: + - 0x1b + - 0x1d + + enable-gpios: + description: PROJ_ON pin, chip powers up PROJ_ON is high. + + vcc_intf-supply: + description: A 1.8V/3.3V supply that power the Host I/O. + + vcc_flsh-supply: + description: A 1.8V/3.3V supply that power the Flash I/O. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: Video port for MIPI DSI input. + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + description: array of physical DSI data lane indexes. + minItems: 1 + items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Video port for DMD output. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - enable-gpios + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + bridge@1b { + compatible = "ti,dlpc3433"; + reg = <0x1b>; + enable-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + bridge_in_dsi: endpoint { + remote-endpoint = <&dsi_out_bridge>; + data-lanes = <1 2 3 4>; + }; + }; + + port@1 { + reg = <1>; + + bridge_out_panel: endpoint { + remote-endpoint = <&panel_out_bridge>; + }; + }; + }; + }; + }; diff --git a/dts/Bindings/display/bridge/ti,sn65dsi83.yaml b/dts/Bindings/display/bridge/ti,sn65dsi83.yaml new file mode 100644 index 0000000000..48a97bb3e2 --- /dev/null +++ b/dts/Bindings/display/bridge/ti,sn65dsi83.yaml @@ -0,0 +1,162 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/ti,sn65dsi83.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SN65DSI83 and SN65DSI84 DSI to LVDS bridge chip + +maintainers: + - Marek Vasut <marex@denx.de> + +description: | + Texas Instruments SN65DSI83 1x Single-link MIPI DSI + to 1x Single-link LVDS + https://www.ti.com/lit/gpn/sn65dsi83 + Texas Instruments SN65DSI84 1x Single-link MIPI DSI + to 1x Dual-link or 2x Single-link LVDS + https://www.ti.com/lit/gpn/sn65dsi84 + +properties: + compatible: + enum: + - ti,sn65dsi83 + - ti,sn65dsi84 + + reg: + enum: + - 0x2c + - 0x2d + + enable-gpios: + maxItems: 1 + description: GPIO specifier for bridge_en pin (active high). + + vcc-supply: + description: A 1.8V power supply (see regulator/regulator.yaml). + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: Video port for MIPI DSI Channel-A input + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + description: array of physical DSI data lane indexes. + minItems: 1 + items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: Video port for MIPI DSI Channel-B input + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + description: array of physical DSI data lane indexes. + minItems: 1 + items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: Video port for LVDS Channel-A output (panel or bridge). + + port@3: + $ref: /schemas/graph.yaml#/properties/port + description: Video port for LVDS Channel-B output (panel or bridge). + + required: + - port@0 + - port@2 + +required: + - compatible + - reg + - ports + +allOf: + - if: + properties: + compatible: + contains: + const: ti,sn65dsi83 + then: + properties: + ports: + properties: + port@1: false + port@3: false + + - if: + properties: + compatible: + contains: + const: ti,sn65dsi84 + then: + properties: + ports: + properties: + port@1: false + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + bridge@2d { + compatible = "ti,sn65dsi83"; + reg = <0x2d>; + + enable-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; + vcc-supply = <®_sn65dsi83_1v8>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + endpoint { + remote-endpoint = <&dsi0_out>; + data-lanes = <1 2 3 4>; + }; + }; + + port@2 { + reg = <2>; + + endpoint { + remote-endpoint = <&panel_in_lvds>; + }; + }; + }; + }; + }; diff --git a/dts/Bindings/display/bridge/ti,sn65dsi86.txt b/dts/Bindings/display/bridge/ti,sn65dsi86.txt deleted file mode 100644 index 8ec4a7f262..0000000000 --- a/dts/Bindings/display/bridge/ti,sn65dsi86.txt +++ /dev/null @@ -1,87 +0,0 @@ -SN65DSI86 DSI to eDP bridge chip --------------------------------- - -This is the binding for Texas Instruments SN65DSI86 bridge. -http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=sn65dsi86&fileType=pdf - -Required properties: -- compatible: Must be "ti,sn65dsi86" -- reg: i2c address of the chip, 0x2d as per datasheet -- enable-gpios: gpio specification for bridge_en pin (active high) - -- vccio-supply: A 1.8V supply that powers up the digital IOs. -- vpll-supply: A 1.8V supply that powers up the displayport PLL. -- vcca-supply: A 1.2V supply that powers up the analog circuits. -- vcc-supply: A 1.2V supply that powers up the digital core. - -Optional properties: -- interrupts-extended: Specifier for the SN65DSI86 interrupt line. - -- gpio-controller: Marks the device has a GPIO controller. -- #gpio-cells : Should be two. The first cell is the pin number and - the second cell is used to specify flags. - See ../../gpio/gpio.txt for more information. -- #pwm-cells : Should be one. See ../../pwm/pwm.yaml for description of - the cell formats. - -- clock-names: should be "refclk" -- clocks: Specification for input reference clock. The reference - clock rate must be 12 MHz, 19.2 MHz, 26 MHz, 27 MHz or 38.4 MHz. - -- data-lanes: See ../../media/video-interface.txt -- lane-polarities: See ../../media/video-interface.txt - -- suspend-gpios: specification for GPIO1 pin on bridge (active low) - -Required nodes: -This device has two video ports. Their connections are modelled using the -OF graph bindings specified in Documentation/devicetree/bindings/graph.txt. - -- Video port 0 for DSI input -- Video port 1 for eDP output - -Example -------- - -edp-bridge@2d { - compatible = "ti,sn65dsi86"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x2d>; - - enable-gpios = <&msmgpio 33 GPIO_ACTIVE_HIGH>; - suspend-gpios = <&msmgpio 34 GPIO_ACTIVE_LOW>; - - interrupts-extended = <&gpio3 4 IRQ_TYPE_EDGE_FALLING>; - - vccio-supply = <&pm8916_l17>; - vcca-supply = <&pm8916_l6>; - vpll-supply = <&pm8916_l17>; - vcc-supply = <&pm8916_l6>; - - clock-names = "refclk"; - clocks = <&input_refclk>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - edp_bridge_in: endpoint { - remote-endpoint = <&dsi_out>; - }; - }; - - port@1 { - reg = <1>; - - edp_bridge_out: endpoint { - data-lanes = <2 1 3 0>; - lane-polarities = <0 1 0 1>; - remote-endpoint = <&edp_panel_in>; - }; - }; - }; -} diff --git a/dts/Bindings/display/bridge/ti,sn65dsi86.yaml b/dts/Bindings/display/bridge/ti,sn65dsi86.yaml new file mode 100644 index 0000000000..6ec6d287bf --- /dev/null +++ b/dts/Bindings/display/bridge/ti,sn65dsi86.yaml @@ -0,0 +1,273 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/ti,sn65dsi86.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SN65DSI86 DSI to eDP bridge chip + +maintainers: + - Sandeep Panda <spanda@codeaurora.org> + +description: | + The Texas Instruments SN65DSI86 bridge takes MIPI DSI in and outputs eDP. + https://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=sn65dsi86&fileType=pdf + +properties: + compatible: + const: ti,sn65dsi86 + + reg: + enum: [ 0x2c, 0x2d ] + + enable-gpios: + maxItems: 1 + description: GPIO specifier for bridge_en pin (active high). + + suspend-gpios: + maxItems: 1 + description: GPIO specifier for GPIO1 pin on bridge (active low). + + no-hpd: + type: boolean + description: + Set if the HPD line on the bridge isn't hooked up to anything or is + otherwise unusable. + + vccio-supply: + description: A 1.8V supply that powers the digital IOs. + + vpll-supply: + description: A 1.8V supply that powers the DisplayPort PLL. + + vcca-supply: + description: A 1.2V supply that powers the analog circuits. + + vcc-supply: + description: A 1.2V supply that powers the digital core. + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + description: + Clock specifier for input reference clock. The reference clock rate must + be 12 MHz, 19.2 MHz, 26 MHz, 27 MHz or 38.4 MHz. + + clock-names: + const: refclk + + gpio-controller: true + '#gpio-cells': + const: 2 + description: + First cell is pin number, second cell is flags. GPIO pin numbers are + 1-based to match the datasheet. See ../../gpio/gpio.txt for more + information. + + '#pwm-cells': + const: 1 + description: See ../../pwm/pwm.yaml for description of the cell formats. + + aux-bus: + $ref: /schemas/display/dp-aux-bus.yaml# + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Video port for MIPI DSI input + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Video port for eDP output (panel or connector). + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + oneOf: + - minItems: 1 + maxItems: 1 + uniqueItems: true + items: + enum: + - 0 + - 1 + description: + If you have 1 logical lane the bridge supports routing + to either port 0 or port 1. Port 0 is suggested. + + - minItems: 2 + maxItems: 2 + uniqueItems: true + items: + enum: + - 0 + - 1 + description: + If you have 2 logical lanes the bridge supports + reordering but only on physical ports 0 and 1. + + - minItems: 4 + maxItems: 4 + uniqueItems: true + items: + enum: + - 0 + - 1 + - 2 + - 3 + description: + If you have 4 logical lanes the bridge supports + reordering in any way. + + lane-polarities: + minItems: 1 + maxItems: 4 + items: + enum: + - 0 + - 1 + + dependencies: + lane-polarities: [data-lanes] + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - vccio-supply + - vpll-supply + - vcca-supply + - vcc-supply + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + bridge@2d { + compatible = "ti,sn65dsi86"; + reg = <0x2d>; + + interrupt-parent = <&tlmm>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; + + enable-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>; + + vpll-supply = <&src_pp1800_s4a>; + vccio-supply = <&src_pp1800_s4a>; + vcca-supply = <&src_pp1200_l2a>; + vcc-supply = <&src_pp1200_l2a>; + + clocks = <&rpmhcc RPMH_LN_BB_CLK2>; + clock-names = "refclk"; + + no-hpd; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + sn65dsi86_out: endpoint { + remote-endpoint = <&panel_in_edp>; + }; + }; + }; + + aux-bus { + panel { + compatible = "boe,nv133fhm-n62"; + power-supply = <&pp3300_dx_edp>; + backlight = <&backlight>; + hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>; + + port { + panel_in_edp: endpoint { + remote-endpoint = <&sn65dsi86_out>; + }; + }; + }; + }; + }; + }; + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + bridge@2d { + compatible = "ti,sn65dsi86"; + reg = <0x2d>; + + enable-gpios = <&msmgpio 33 GPIO_ACTIVE_HIGH>; + suspend-gpios = <&msmgpio 34 GPIO_ACTIVE_LOW>; + + interrupts-extended = <&gpio3 4 IRQ_TYPE_EDGE_FALLING>; + + vccio-supply = <&pm8916_l17>; + vcca-supply = <&pm8916_l6>; + vpll-supply = <&pm8916_l17>; + vcc-supply = <&pm8916_l6>; + + clock-names = "refclk"; + clocks = <&input_refclk>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + edp_bridge_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + + port@1 { + reg = <1>; + + edp_bridge_out: endpoint { + data-lanes = <2 1 3 0>; + lane-polarities = <0 1 0 1>; + remote-endpoint = <&edp_panel_in>; + }; + }; + }; + }; + }; diff --git a/dts/Bindings/display/bridge/ti,tfp410.txt b/dts/Bindings/display/bridge/ti,tfp410.txt deleted file mode 100644 index 5ff4f64ef8..0000000000 --- a/dts/Bindings/display/bridge/ti,tfp410.txt +++ /dev/null @@ -1,66 +0,0 @@ -TFP410 DPI to DVI encoder -========================= - -Required properties: -- compatible: "ti,tfp410" - -Optional properties: -- powerdown-gpios: power-down gpio -- reg: I2C address. If and only if present the device node should be placed - into the I2C controller node where the TFP410 I2C is connected to. -- ti,deskew: data de-skew in 350ps increments, from -4 to +3, as configured - through th DK[3:1] pins. This property shall be present only if the TFP410 - is not connected through I2C. - -Required nodes: - -This device has two video ports. Their connections are modeled using the OF -graph bindings specified in [1]. Each port node shall have a single endpoint. - -- Port 0 is the DPI input port. Its endpoint subnode shall contain a - pclk-sample and bus-width property and a remote-endpoint property as specified - in [1]. - - If pclk-sample is not defined, pclk-sample = 0 should be assumed for - backward compatibility. - - If bus-width is not defined then bus-width = 24 should be assumed for - backward compatibility. - bus-width = 24: 24 data lines are connected and single-edge mode - bus-width = 12: 12 data lines are connected and dual-edge mode - -- Port 1 is the DVI output port. Its endpoint subnode shall contain a - remote-endpoint property is specified in [1]. - -[1] Documentation/devicetree/bindings/media/video-interfaces.txt - - -Example -------- - -tfp410: encoder@0 { - compatible = "ti,tfp410"; - powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>; - ti,deskew = <4>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - tfp410_in: endpoint@0 { - pclk-sample = <1>; - bus-width = <24>; - remote-endpoint = <&dpi_out>; - }; - }; - - port@1 { - reg = <1>; - - tfp410_out: endpoint@0 { - remote-endpoint = <&dvi_connector_in>; - }; - }; - }; -}; diff --git a/dts/Bindings/display/bridge/ti,tfp410.yaml b/dts/Bindings/display/bridge/ti,tfp410.yaml new file mode 100644 index 0000000000..4c5dd8ec29 --- /dev/null +++ b/dts/Bindings/display/bridge/ti,tfp410.yaml @@ -0,0 +1,119 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/ti,tfp410.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TFP410 DPI to DVI encoder + +maintainers: + - Tomi Valkeinen <tomi.valkeinen@ti.com> + - Jyri Sarha <jsarha@ti.com> + +properties: + compatible: + const: ti,tfp410 + + reg: + description: I2C address of the device. + maxItems: 1 + + powerdown-gpios: + maxItems: 1 + + ti,deskew: + description: + Data de-skew value in 350ps increments, from 0 to 7, as configured + through the DK[3:1] pins. The de-skew multiplier is computed as + (DK[3:1] - 4), so it ranges from -4 to 3. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 7 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: DPI input port. + + properties: + endpoint: + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false + + properties: + pclk-sample: + description: + Endpoint sampling edge. + enum: + - 0 # Falling edge + - 1 # Rising edge + default: 0 + + bus-width: + description: + Endpoint bus width. + enum: + - 12 # 12 data lines connected and dual-edge mode + - 24 # 24 data lines connected and single-edge mode + default: 24 + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: DVI output port. + + required: + - port@0 + - port@1 + +required: + - compatible + - ports + +if: + required: + - reg +then: + properties: + ti,deskew: false +else: + required: + - ti,deskew + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + tfp410: encoder { + compatible = "ti,tfp410"; + powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>; + ti,deskew = <3>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + tfp410_in: endpoint { + pclk-sample = <1>; + bus-width = <24>; + remote-endpoint = <&dpi_out>; + }; + }; + + port@1 { + reg = <1>; + tfp410_out: endpoint { + remote-endpoint = <&dvi_connector_in>; + }; + }; + }; + }; + +... diff --git a/dts/Bindings/display/bridge/ti,ths813x.txt b/dts/Bindings/display/bridge/ti,ths813x.txt deleted file mode 100644 index df3d7c1ac0..0000000000 --- a/dts/Bindings/display/bridge/ti,ths813x.txt +++ /dev/null @@ -1,51 +0,0 @@ -THS8134 and THS8135 Video DAC ------------------------------ - -This is the binding for Texas Instruments THS8134, THS8134A, THS8134B and -THS8135 Video DAC bridges. - -Required properties: - -- compatible: Must be one of - "ti,ths8134" - "ti,ths8134a," "ti,ths8134" - "ti,ths8134b", "ti,ths8134" - "ti,ths8135" - -Required nodes: - -This device has two video ports. Their connections are modelled using the OF -graph bindings specified in Documentation/devicetree/bindings/graph.txt. - -- Video port 0 for RGB input -- Video port 1 for VGA output - -Example -------- - -vga-bridge { - compatible = "ti,ths8135"; - #address-cells = <1>; - #size-cells = <0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - vga_bridge_in: endpoint { - remote-endpoint = <&lcdc_out_vga>; - }; - }; - - port@1 { - reg = <1>; - - vga_bridge_out: endpoint { - remote-endpoint = <&vga_con_in>; - }; - }; - }; -}; diff --git a/dts/Bindings/display/bridge/toshiba,tc358762.yaml b/dts/Bindings/display/bridge/toshiba,tc358762.yaml new file mode 100644 index 0000000000..6c1de0b217 --- /dev/null +++ b/dts/Bindings/display/bridge/toshiba,tc358762.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358762.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Toshiba TC358762 MIPI DSI to MIPI DPI bridge + +maintainers: + - Marek Vasut <marex@denx.de> + +description: | + The TC358762 is bridge device which converts MIPI DSI to MIPI DPI. + +properties: + compatible: + enum: + - toshiba,tc358762 + + reg: + maxItems: 1 + description: virtual channel number of a DSI peripheral + + reset-gpios: + maxItems: 1 + + vddc-supply: + description: Regulator for 1.2V internal core power. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Video port for MIPI DSI input + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Video port for MIPI DPI output (panel or connector). + + required: + - port@1 + +required: + - compatible + - reg + - vddc-supply + - ports + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + bridge@0 { + reg = <0>; + compatible = "toshiba,tc358762"; + vddc-supply = <&vcc_1v2_reg>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + bridge_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + + port@1 { + reg = <1>; + bridge_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; + }; + +... diff --git a/dts/Bindings/display/bridge/toshiba,tc358764.txt b/dts/Bindings/display/bridge/toshiba,tc358764.txt deleted file mode 100644 index 8f9abf28a8..0000000000 --- a/dts/Bindings/display/bridge/toshiba,tc358764.txt +++ /dev/null @@ -1,35 +0,0 @@ -TC358764 MIPI-DSI to LVDS panel bridge - -Required properties: - - compatible: "toshiba,tc358764" - - reg: the virtual channel number of a DSI peripheral - - vddc-supply: core voltage supply, 1.2V - - vddio-supply: I/O voltage supply, 1.8V or 3.3V - - vddlvds-supply: LVDS1/2 voltage supply, 3.3V - - reset-gpios: a GPIO spec for the reset pin - -The device node can contain following 'port' child nodes, -according to the OF graph bindings defined in [1]: - 0: DSI Input, not required, if the bridge is DSI controlled - 1: LVDS Output, mandatory - -[1]: Documentation/devicetree/bindings/media/video-interfaces.txt - -Example: - - bridge@0 { - reg = <0>; - compatible = "toshiba,tc358764"; - vddc-supply = <&vcc_1v2_reg>; - vddio-supply = <&vcc_1v8_reg>; - vddlvds-supply = <&vcc_3v3_reg>; - reset-gpios = <&gpd1 6 GPIO_ACTIVE_LOW>; - #address-cells = <1>; - #size-cells = <0>; - port@1 { - reg = <1>; - lvds_ep: endpoint { - remote-endpoint = <&panel_ep>; - }; - }; - }; diff --git a/dts/Bindings/display/bridge/toshiba,tc358764.yaml b/dts/Bindings/display/bridge/toshiba,tc358764.yaml new file mode 100644 index 0000000000..8666074005 --- /dev/null +++ b/dts/Bindings/display/bridge/toshiba,tc358764.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358764.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Toshiba TC358764 MIPI-DSI to LVDS bridge + +maintainers: + - Andrzej Hajda <andrzej.hajda@intel.com> + +properties: + compatible: + const: toshiba,tc358764 + + reg: + description: Virtual channel number of a DSI peripheral + maxItems: 1 + + reset-gpios: + maxItems: 1 + + vddc-supply: + description: Core voltage supply, 1.2V + + vddio-supply: + description: I/O voltage supply, 1.8V or 3.3V + + vddlvds-supply: + description: LVDS1/2 voltage supply, 3.3V + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Video port for MIPI DSI input, if the bridge DSI controlled + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Video port for LVDS output (panel or connector). + + required: + - port@1 + +required: + - compatible + - reg + - reset-gpios + - vddc-supply + - vddio-supply + - vddlvds-supply + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + bridge@0 { + compatible = "toshiba,tc358764"; + reg = <0>; + + reset-gpios = <&gpd1 6 GPIO_ACTIVE_LOW>; + vddc-supply = <&vcc_1v2_reg>; + vddio-supply = <&vcc_1v8_reg>; + vddlvds-supply = <&vcc_3v3_reg>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + lvds_ep: endpoint { + remote-endpoint = <&panel_ep>; + }; + }; + }; + }; + }; diff --git a/dts/Bindings/display/bridge/toshiba,tc358767.txt b/dts/Bindings/display/bridge/toshiba,tc358767.txt deleted file mode 100644 index 583c5e9dbe..0000000000 --- a/dts/Bindings/display/bridge/toshiba,tc358767.txt +++ /dev/null @@ -1,54 +0,0 @@ -Toshiba TC358767 eDP bridge bindings - -Required properties: - - compatible: "toshiba,tc358767" - - reg: i2c address of the bridge, 0x68 or 0x0f, depending on bootstrap pins - - clock-names: should be "ref" - - clocks: OF device-tree clock specification for refclk input. The reference - clock rate must be 13 MHz, 19.2 MHz, 26 MHz, or 38.4 MHz. - -Optional properties: - - shutdown-gpios: OF device-tree gpio specification for SD pin - (active high shutdown input) - - reset-gpios: OF device-tree gpio specification for RSTX pin - (active low system reset) - - toshiba,hpd-pin: TC358767 GPIO pin number to which HPD is connected to (0 or 1) - - ports: the ports node can contain video interface port nodes to connect - to a DPI/DSI source and to an eDP/DP sink according to [1][2]: - - port@0: DSI input port - - port@1: DPI input port - - port@2: eDP/DP output port - -[1]: Documentation/devicetree/bindings/graph.txt -[2]: Documentation/devicetree/bindings/media/video-interfaces.txt - -Example: - edp-bridge@68 { - compatible = "toshiba,tc358767"; - reg = <0x68>; - shutdown-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; - reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; - clock-names = "ref"; - clocks = <&edp_refclk>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - reg = <1>; - - bridge_in: endpoint { - remote-endpoint = <&dpi_out>; - }; - }; - - port@2 { - reg = <2>; - - bridge_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; - }; - }; diff --git a/dts/Bindings/display/bridge/toshiba,tc358767.yaml b/dts/Bindings/display/bridge/toshiba,tc358767.yaml new file mode 100644 index 0000000000..ae894d996d --- /dev/null +++ b/dts/Bindings/display/bridge/toshiba,tc358767.yaml @@ -0,0 +1,185 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358767.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Toshiba TC358767/TC358867/TC9595 DSI/DPI/eDP bridge + +maintainers: + - Andrey Gusakov <andrey.gusakov@cogentembedded.com> + +description: | + The TC358767/TC358867/TC9595 is bridge device which + converts DSI/DPI to eDP/DP . + +properties: + compatible: + oneOf: + - items: + - enum: + - toshiba,tc358867 + - toshiba,tc9595 + - const: toshiba,tc358767 + - const: toshiba,tc358767 + + reg: + enum: + - 0x68 + - 0x0f + description: | + i2c address of the bridge, 0x68 or 0x0f, depending on bootstrap pins + + clock-names: + const: ref + + clocks: + maxItems: 1 + description: | + OF device-tree clock specification for refclk input. The reference. + clock rate must be 13 MHz, 19.2 MHz, 26 MHz, or 38.4 MHz. + + shutdown-gpios: + maxItems: 1 + description: | + OF device-tree gpio specification for SD pin(active high shutdown input) + + reset-gpios: + maxItems: 1 + description: | + OF device-tree gpio specification for RSTX pin(active low system reset) + + interrupts: + maxItems: 1 + + toshiba,hpd-pin: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 + - 1 + description: TC358767 GPIO pin number to which HPD is connected to (0 or 1) + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: | + DSI input port. The remote endpoint phandle should be a + reference to a valid DSI output endpoint node + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + description: array of physical DSI data lane indexes. + minItems: 1 + items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: | + DPI input/output port. The remote endpoint phandle should be a + reference to a valid DPI output or input endpoint node. + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: | + eDP/DP output port. The remote endpoint phandle should be a + reference to a valid eDP panel input endpoint node. This port is + optional, treated as DP panel if not defined + + oneOf: + - required: + - port@0 + - required: + - port@1 + + +required: + - compatible + - reg + - clock-names + - clocks + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + /* DPI input and eDP output */ + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + edp-bridge@68 { + compatible = "toshiba,tc358767"; + reg = <0x68>; + shutdown-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; + clock-names = "ref"; + clocks = <&edp_refclk>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + bridge_in_0: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + + port@2 { + reg = <2>; + + bridge_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; + }; + - | + /* DPI input and DP output */ + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + edp-bridge@68 { + compatible = "toshiba,tc358767"; + reg = <0x68>; + shutdown-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; + clock-names = "ref"; + clocks = <&edp_refclk>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + bridge_in_1: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + }; + }; + }; diff --git a/dts/Bindings/display/bridge/toshiba,tc358768.yaml b/dts/Bindings/display/bridge/toshiba,tc358768.yaml index c036a75db8..779d8c57f8 100644 --- a/dts/Bindings/display/bridge/toshiba,tc358768.yaml +++ b/dts/Bindings/display/bridge/toshiba,tc358768.yaml @@ -42,65 +42,31 @@ properties: const: refclk ports: - type: object + $ref: /schemas/graph.yaml#/properties/ports properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - port@0: - type: object - additionalProperties: false - + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false description: | Video port for RGB input properties: - reg: - const: 0 - - patternProperties: endpoint: - type: object - additionalProperties: false + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false properties: data-lines: + $ref: /schemas/types.yaml#/definitions/uint32 enum: [ 16, 18, 24 ] - remote-endpoint: true - - required: - - reg - port@1: - type: object - additionalProperties: false - + $ref: /schemas/graph.yaml#/properties/port description: | Video port for DSI output (panel or connector). - properties: - reg: - const: 1 - - patternProperties: - endpoint: - type: object - additionalProperties: false - - properties: - remote-endpoint: true - - required: - - reg - required: - - "#address-cells" - - "#size-cells" - port@0 - port@1 @@ -112,17 +78,20 @@ required: - vddio-supply - ports -additionalProperties: false +allOf: + - $ref: ../dsi-controller.yaml# + +unevaluatedProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> - i2c1 { + i2c { #address-cells = <1>; #size-cells = <0>; - dsi_bridge: dsi-bridge@e { + dsi_bridge: dsi@e { compatible = "toshiba,tc358768"; reg = <0xe>; @@ -156,4 +125,3 @@ examples: }; }; }; - diff --git a/dts/Bindings/display/bridge/toshiba,tc358775.yaml b/dts/Bindings/display/bridge/toshiba,tc358775.yaml new file mode 100644 index 0000000000..d879c70059 --- /dev/null +++ b/dts/Bindings/display/bridge/toshiba,tc358775.yaml @@ -0,0 +1,206 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358775.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Toshiba TC358775 DSI to LVDS bridge + +maintainers: + - Vinay Simha BN <simhavcs@gmail.com> + +description: | + This binding supports DSI to LVDS bridge TC358775 + + MIPI DSI-RX Data 4-lane, CLK 1-lane with data rates up to 800 Mbps/lane. + Video frame size: + Up to 1600x1200 24-bit/pixel resolution for single-link LVDS display panel + limited by 135 MHz LVDS speed + Up to WUXGA (1920x1200 24-bit pixels) resolution for dual-link LVDS display + panel, limited by 270 MHz LVDS speed. + +properties: + compatible: + const: toshiba,tc358775 + + reg: + maxItems: 1 + description: i2c address of the bridge, 0x0f + + vdd-supply: + description: 1.2V LVDS Power Supply + + vddio-supply: + description: 1.8V IO Power Supply + + stby-gpios: + maxItems: 1 + description: Standby pin, Low active + + reset-gpios: + maxItems: 1 + description: Hardware reset, Low active + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: | + DSI Input. The remote endpoint phandle should be a + reference to a valid mipi_dsi_host device node. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: | + Video port for LVDS output (panel or connector). + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: | + Video port for Dual link LVDS output (panel or connector). + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - vdd-supply + - vddio-supply + - stby-gpios + - reset-gpios + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + /* For single-link LVDS display panel */ + + i2c@78b8000 { + /* On High speed expansion */ + label = "HS-I2C2"; + reg = <0x078b8000 0x500>; + clock-frequency = <400000>; /* fastmode operation */ + #address-cells = <1>; + #size-cells = <0>; + + tc_bridge: bridge@f { + compatible = "toshiba,tc358775"; + reg = <0x0f>; + + vdd-supply = <&pm8916_l2>; + vddio-supply = <&pm8916_l6>; + + stby-gpios = <&msmgpio 99 GPIO_ACTIVE_LOW>; + reset-gpios = <&msmgpio 72 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + d2l_in_test: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + lvds_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; + }; + + dsi@1a98000 { + reg = <0x1a98000 0x25c>; + reg-names = "dsi_ctrl"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@1 { + reg = <1>; + dsi0_out: endpoint { + remote-endpoint = <&d2l_in_test>; + data-lanes = <0 1 2 3>; + }; + }; + }; + }; + + - | + /* For dual-link LVDS display panel */ + + i2c@78b8000 { + /* On High speed expansion */ + label = "HS-I2C2"; + reg = <0x078b8000 0x500>; + clock-frequency = <400000>; /* fastmode operation */ + #address-cells = <1>; + #size-cells = <0>; + + tc_bridge_dual: bridge@f { + compatible = "toshiba,tc358775"; + reg = <0x0f>; + + vdd-supply = <&pm8916_l2>; + vddio-supply = <&pm8916_l6>; + + stby-gpios = <&msmgpio 99 GPIO_ACTIVE_LOW>; + reset-gpios = <&msmgpio 72 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + d2l_in_dual: endpoint { + remote-endpoint = <&dsi0_out_dual>; + }; + }; + + port@1 { + reg = <1>; + lvds0_out: endpoint { + remote-endpoint = <&panel_in0>; + }; + }; + + port@2 { + reg = <2>; + lvds1_out: endpoint { + remote-endpoint = <&panel_in1>; + }; + }; + }; + }; + }; + + dsi@1a98000 { + reg = <0x1a98000 0x25c>; + reg-names = "dsi_ctrl"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@1 { + reg = <1>; + dsi0_out_dual: endpoint { + remote-endpoint = <&d2l_in_dual>; + data-lanes = <0 1 2 3>; + }; + }; + }; + }; +... diff --git a/dts/Bindings/display/cirrus,clps711x-fb.txt b/dts/Bindings/display/cirrus,clps711x-fb.txt index 0ab5f06636..84c75f8498 100644 --- a/dts/Bindings/display/cirrus,clps711x-fb.txt +++ b/dts/Bindings/display/cirrus,clps711x-fb.txt @@ -1,4 +1,4 @@ -* Currus Logic CLPS711X Framebuffer +* Cirrus Logic CLPS711X Framebuffer Required properties: - compatible: Shall contain "cirrus,ep7209-fb". diff --git a/dts/Bindings/display/connector/analog-tv-connector.txt b/dts/Bindings/display/connector/analog-tv-connector.txt deleted file mode 100644 index 883bcb2604..0000000000 --- a/dts/Bindings/display/connector/analog-tv-connector.txt +++ /dev/null @@ -1,31 +0,0 @@ -Analog TV Connector -=================== - -Required properties: -- compatible: "composite-video-connector" or "svideo-connector" - -Optional properties: -- label: a symbolic name for the connector -- sdtv-standards: limit the supported TV standards on a connector to the given - ones. If not specified all TV standards are allowed. - Possible TV standards are defined in - include/dt-bindings/display/sdtv-standards.h. - -Required nodes: -- Video port for TV input - -Example -------- -#include <dt-bindings/display/sdtv-standards.h> - -tv: connector { - compatible = "composite-video-connector"; - label = "tv"; - sdtv-standards = <(SDTV_STD_PAL | SDTV_STD_NTSC)>; - - port { - tv_connector_in: endpoint { - remote-endpoint = <&venc_out>; - }; - }; -}; diff --git a/dts/Bindings/display/connector/analog-tv-connector.yaml b/dts/Bindings/display/connector/analog-tv-connector.yaml new file mode 100644 index 0000000000..a31ca2d52b --- /dev/null +++ b/dts/Bindings/display/connector/analog-tv-connector.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/connector/analog-tv-connector.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog TV Connector + +maintainers: + - Laurent Pinchart <Laurent.pinchart@ideasonboard.com> + +properties: + compatible: + enum: + - composite-video-connector + - svideo-connector + + label: true + + sdtv-standards: + description: + Limit the supported TV standards on a connector to the given ones. If + not specified all TV standards are allowed. Possible TV standards are + defined in include/dt-bindings/display/sdtv-standards.h. + $ref: /schemas/types.yaml#/definitions/uint32 + + port: + $ref: /schemas/graph.yaml#/properties/port + description: Connection to controller providing analog TV signals + +required: + - compatible + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/display/sdtv-standards.h> + + connector { + compatible = "composite-video-connector"; + label = "tv"; + sdtv-standards = <(SDTV_STD_PAL | SDTV_STD_NTSC)>; + + port { + tv_connector_in: endpoint { + remote-endpoint = <&venc_out>; + }; + }; + }; + +... diff --git a/dts/Bindings/display/connector/dp-connector.yaml b/dts/Bindings/display/connector/dp-connector.yaml new file mode 100644 index 0000000000..22792a79e7 --- /dev/null +++ b/dts/Bindings/display/connector/dp-connector.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/connector/dp-connector.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: DisplayPort Connector + +maintainers: + - Tomi Valkeinen <tomi.valkeinen@ti.com> + +properties: + compatible: + const: dp-connector + + label: true + + type: + enum: + - full-size + - mini + + hpd-gpios: + description: A GPIO line connected to HPD + maxItems: 1 + + dp-pwr-supply: + description: Power supply for the DP_PWR pin + + port: + $ref: /schemas/graph.yaml#/properties/port + description: Connection to controller providing DP signals + +required: + - compatible + - type + - port + +additionalProperties: false + +examples: + - | + connector { + compatible = "dp-connector"; + label = "dp0"; + type = "full-size"; + + port { + dp_connector_in: endpoint { + remote-endpoint = <&dp_out>; + }; + }; + }; + +... diff --git a/dts/Bindings/display/connector/dvi-connector.txt b/dts/Bindings/display/connector/dvi-connector.txt deleted file mode 100644 index 207e42e9eb..0000000000 --- a/dts/Bindings/display/connector/dvi-connector.txt +++ /dev/null @@ -1,36 +0,0 @@ -DVI Connector -============== - -Required properties: -- compatible: "dvi-connector" - -Optional properties: -- label: a symbolic name for the connector -- ddc-i2c-bus: phandle to the i2c bus that is connected to DVI DDC -- analog: the connector has DVI analog pins -- digital: the connector has DVI digital pins -- dual-link: the connector has pins for DVI dual-link -- hpd-gpios: HPD GPIO number - -Required nodes: -- Video port for DVI input - -Note: One (or both) of 'analog' or 'digital' must be set. - -Example -------- - -dvi0: connector@0 { - compatible = "dvi-connector"; - label = "dvi"; - - digital; - - ddc-i2c-bus = <&i2c3>; - - port { - dvi_connector_in: endpoint { - remote-endpoint = <&tfp410_out>; - }; - }; -}; diff --git a/dts/Bindings/display/connector/dvi-connector.yaml b/dts/Bindings/display/connector/dvi-connector.yaml new file mode 100644 index 0000000000..93eb14294e --- /dev/null +++ b/dts/Bindings/display/connector/dvi-connector.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/connector/dvi-connector.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: DVI Connector + +maintainers: + - Laurent Pinchart <Laurent.pinchart@ideasonboard.com> + +properties: + compatible: + const: dvi-connector + + label: true + + hpd-gpios: + description: A GPIO line connected to HPD + maxItems: 1 + + ddc-i2c-bus: + description: phandle link to the I2C controller used for DDC EDID probing + $ref: /schemas/types.yaml#/definitions/phandle + + analog: + type: boolean + description: the connector has DVI analog pins + + digital: + type: boolean + description: the connector has DVI digital pins + + dual-link: + type: boolean + description: the connector has pins for DVI dual-link + + port: + $ref: /schemas/graph.yaml#/properties/port + description: Connection to controller providing DVI signals + +required: + - compatible + - port + +anyOf: + - required: + - analog + - required: + - digital + +additionalProperties: false + +examples: + - | + connector { + compatible = "dvi-connector"; + label = "dvi"; + + digital; + + ddc-i2c-bus = <&i2c3>; + + port { + dvi_connector_in: endpoint { + remote-endpoint = <&tfp410_out>; + }; + }; + }; + +... diff --git a/dts/Bindings/display/connector/hdmi-connector.txt b/dts/Bindings/display/connector/hdmi-connector.txt deleted file mode 100644 index aeb07c4bd7..0000000000 --- a/dts/Bindings/display/connector/hdmi-connector.txt +++ /dev/null @@ -1,31 +0,0 @@ -HDMI Connector -============== - -Required properties: -- compatible: "hdmi-connector" -- type: the HDMI connector type: "a", "b", "c", "d" or "e" - -Optional properties: -- label: a symbolic name for the connector -- hpd-gpios: HPD GPIO number -- ddc-i2c-bus: phandle link to the I2C controller used for DDC EDID probing -- ddc-en-gpios: signal to enable DDC bus - -Required nodes: -- Video port for HDMI input - -Example -------- - -hdmi0: connector@1 { - compatible = "hdmi-connector"; - label = "hdmi"; - - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&tpd12s015_out>; - }; - }; -}; diff --git a/dts/Bindings/display/connector/hdmi-connector.yaml b/dts/Bindings/display/connector/hdmi-connector.yaml new file mode 100644 index 0000000000..3ee8f92259 --- /dev/null +++ b/dts/Bindings/display/connector/hdmi-connector.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/connector/hdmi-connector.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: HDMI Connector + +maintainers: + - Laurent Pinchart <Laurent.pinchart@ideasonboard.com> + +properties: + compatible: + const: hdmi-connector + + type: + description: The HDMI connector type + enum: + - a # Standard full size + - b # Never deployed? + - c # Mini + - d # Micro + - e # automotive + + label: true + + hpd-gpios: + description: A GPIO line connected to HPD + maxItems: 1 + + ddc-i2c-bus: + description: phandle link to the I2C controller used for DDC EDID probing + $ref: /schemas/types.yaml#/definitions/phandle + + ddc-en-gpios: + description: GPIO signal to enable DDC bus + maxItems: 1 + + hdmi-pwr-supply: + description: Power supply for the HDMI +5V Power pin + + port: + $ref: /schemas/graph.yaml#/properties/port + description: Connection to controller providing HDMI signals + +required: + - compatible + - port + - type + +additionalProperties: false + +examples: + - | + connector { + compatible = "hdmi-connector"; + label = "hdmi"; + + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&tpd12s015_out>; + }; + }; + }; + +... diff --git a/dts/Bindings/display/connector/vga-connector.txt b/dts/Bindings/display/connector/vga-connector.txt deleted file mode 100644 index c727f298e7..0000000000 --- a/dts/Bindings/display/connector/vga-connector.txt +++ /dev/null @@ -1,36 +0,0 @@ -VGA Connector -============= - -Required properties: - -- compatible: "vga-connector" - -Optional properties: - -- label: a symbolic name for the connector corresponding to a hardware label -- ddc-i2c-bus: phandle to the I2C bus that is connected to VGA DDC - -Required nodes: - -The VGA connector internal connections are modeled using the OF graph bindings -specified in Documentation/devicetree/bindings/graph.txt. - -The VGA connector has a single port that must be connected to a video source -port. - - -Example -------- - -vga0: connector@0 { - compatible = "vga-connector"; - label = "vga"; - - ddc-i2c-bus = <&i2c3>; - - port { - vga_connector_in: endpoint { - remote-endpoint = <&adv7123_out>; - }; - }; -}; diff --git a/dts/Bindings/display/connector/vga-connector.yaml b/dts/Bindings/display/connector/vga-connector.yaml new file mode 100644 index 0000000000..25f8680020 --- /dev/null +++ b/dts/Bindings/display/connector/vga-connector.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/connector/vga-connector.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: VGA Connector + +maintainers: + - Laurent Pinchart <Laurent.pinchart@ideasonboard.com> + +properties: + compatible: + const: vga-connector + + label: true + + ddc-i2c-bus: + description: phandle link to the I2C controller used for DDC EDID probing + $ref: /schemas/types.yaml#/definitions/phandle + + port: + $ref: /schemas/graph.yaml#/properties/port + description: Connection to controller providing VGA signals + +required: + - compatible + - port + +additionalProperties: false + +examples: + - | + connector { + compatible = "vga-connector"; + label = "vga"; + + ddc-i2c-bus = <&i2c3>; + + port { + vga_connector_in: endpoint { + remote-endpoint = <&adv7123_out>; + }; + }; + }; + +... diff --git a/dts/Bindings/display/dp-aux-bus.yaml b/dts/Bindings/display/dp-aux-bus.yaml new file mode 100644 index 0000000000..0ece7b0179 --- /dev/null +++ b/dts/Bindings/display/dp-aux-bus.yaml @@ -0,0 +1,37 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/dp-aux-bus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: DisplayPort AUX bus + +maintainers: + - Douglas Anderson <dianders@chromium.org> + +description: + DisplayPort controllers provide a control channel to the sinks that + are hooked up to them. This is the DP AUX bus. Over the DP AUX bus + we can query properties about a sink and also configure it. In + particular, DP sinks support DDC over DP AUX which allows tunneling + a standard I2C DDC connection over the AUX channel. + + To model this relationship, DP sinks should be placed as children + of the DP controller under the "aux-bus" node. + + At the moment, this binding only handles the eDP case. It is + possible it will be extended in the future to handle the DP case. + For DP, presumably a connector would be listed under the DP AUX + bus instead of a panel. + +properties: + $nodename: + const: aux-bus + + panel: + $ref: panel/panel-common.yaml# + +additionalProperties: false + +required: + - panel diff --git a/dts/Bindings/display/dsi-controller.yaml b/dts/Bindings/display/dsi-controller.yaml index fd986c36c7..67ce10307e 100644 --- a/dts/Bindings/display/dsi-controller.yaml +++ b/dts/Bindings/display/dsi-controller.yaml @@ -28,7 +28,16 @@ description: | properties: $nodename: - pattern: "^dsi-controller(@.*)?$" + pattern: "^dsi(@.*)?$" + + clock-master: + type: boolean + description: + Should be enabled if the host is being used in conjunction with + another DSI host to drive the same peripheral. Hardware supporting + such a configuration generally requires the data on both the busses + to be driven by the same clock. Only the DSI host instance + controlling this clock should contain this property. "#address-cells": const: 1 @@ -52,15 +61,6 @@ patternProperties: case the reg property can take multiple entries, one for each virtual channel that the peripheral responds to. - clock-master: - type: boolean - description: - Should be enabled if the host is being used in conjunction with - another DSI host to drive the same peripheral. Hardware supporting - such a configuration generally requires the data on both the busses - to be driven by the same clock. Only the DSI host instance - controlling this clock should contain this property. - enforce-video-mode: type: boolean description: @@ -73,10 +73,12 @@ patternProperties: required: - reg +additionalProperties: true + examples: - | #include <dt-bindings/gpio/gpio.h> - dsi-controller@a0351000 { + dsi@a0351000 { reg = <0xa0351000 0x1000>; #address-cells = <1>; #size-cells = <0>; diff --git a/dts/Bindings/display/exynos/exynos-mic.txt b/dts/Bindings/display/exynos/exynos-mic.txt deleted file mode 100644 index 0fba2ee644..0000000000 --- a/dts/Bindings/display/exynos/exynos-mic.txt +++ /dev/null @@ -1,51 +0,0 @@ -Device-Tree bindings for Samsung Exynos SoC mobile image compressor (MIC) - -MIC (mobile image compressor) resides between decon and mipi dsi. Mipi dsi is -not capable to transfer high resoltuion frame data as decon can send. MIC -solves this problem by compressing the frame data by 1/2 before it is -transferred through mipi dsi. The compressed frame data must be uncompressed in -the panel PCB. - -Required properties: -- compatible: value should be "samsung,exynos5433-mic". -- reg: physical base address and length of the MIC registers set and system - register of mic. -- clocks: must include clock specifiers corresponding to entries in the - clock-names property. -- clock-names: list of clock names sorted in the same order as the clocks - property. Must contain "pclk_mic0", "sclk_rgb_vclk_to_mic0". -- samsung,disp-syscon: the reference node for syscon for DISP block. -- ports: contains a port which is connected to decon node and dsi node. - address-cells and size-cells must 1 and 0, respectively. -- port: contains an endpoint node which is connected to the endpoint in the - decon node or dsi node. The reg value must be 0 and 1 respectively. - -Example: -SoC specific DT entry: -mic: mic@13930000 { - compatible = "samsung,exynos5433-mic"; - reg = <0x13930000 0x48>; - clocks = <&cmu_disp CLK_PCLK_MIC0>, - <&cmu_disp CLK_SCLK_RGB_VCLK_TO_MIC0>; - clock-names = "pclk_mic0", "sclk_rgb_vclk_to_mic0"; - samsung,disp-syscon = <&syscon_disp>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - mic_to_decon: endpoint { - remote-endpoint = <&decon_to_mic>; - }; - }; - - port@1 { - reg = <1>; - mic_to_dsi: endpoint { - remote-endpoint = <&dsi_to_mic>; - }; - }; - }; -}; diff --git a/dts/Bindings/display/exynos/exynos5433-decon.txt b/dts/Bindings/display/exynos/exynos5433-decon.txt deleted file mode 100644 index 775193e1c6..0000000000 --- a/dts/Bindings/display/exynos/exynos5433-decon.txt +++ /dev/null @@ -1,60 +0,0 @@ -Device-Tree bindings for Samsung Exynos SoC display controller (DECON) - -DECON (Display and Enhancement Controller) is the Display Controller for the -Exynos series of SoCs which transfers the image data from a video memory -buffer to an external LCD interface. - -Required properties: -- compatible: value should be one of: - "samsung,exynos5433-decon", "samsung,exynos5433-decon-tv"; -- reg: physical base address and length of the DECON registers set. -- interrupt-names: should contain the interrupt names depending on mode of work: - video mode: "vsync", - command mode: "lcd_sys", - command mode with software trigger: "lcd_sys", "te". -- interrupts or interrupts-extended: list of interrupt specifiers corresponding - to names privided in interrupt-names, as described in - interrupt-controller/interrupts.txt -- clocks: must include clock specifiers corresponding to entries in the - clock-names property. -- clock-names: list of clock names sorted in the same order as the clocks - property. Must contain "pclk", "aclk_decon", "aclk_smmu_decon0x", - "aclk_xiu_decon0x", "pclk_smmu_decon0x", "aclk_smmu_decon1x", - "aclk_xiu_decon1x", "pclk_smmu_decon1x", clk_decon_vclk", - "sclk_decon_eclk" -- ports: contains a port which is connected to mic node. address-cells and - size-cells must 1 and 0, respectively. -- port: contains an endpoint node which is connected to the endpoint in the mic - node. The reg value muset be 0. - -Example: -SoC specific DT entry: -decon: decon@13800000 { - compatible = "samsung,exynos5433-decon"; - reg = <0x13800000 0x2104>; - clocks = <&cmu_disp CLK_ACLK_DECON>, <&cmu_disp CLK_ACLK_SMMU_DECON0X>, - <&cmu_disp CLK_ACLK_XIU_DECON0X>, - <&cmu_disp CLK_PCLK_SMMU_DECON0X>, - <&cmu_disp CLK_ACLK_SMMU_DECON1X>, - <&cmu_disp CLK_ACLK_XIU_DECON1X>, - <&cmu_disp CLK_PCLK_SMMU_DECON1X>, - <&cmu_disp CLK_SCLK_DECON_VCLK>, - <&cmu_disp CLK_SCLK_DECON_ECLK>; - clock-names = "aclk_decon", "aclk_smmu_decon0x", "aclk_xiu_decon0x", - "pclk_smmu_decon0x", "aclk_smmu_decon1x", "aclk_xiu_decon1x", - "pclk_smmu_decon1x", "sclk_decon_vclk", "sclk_decon_eclk"; - interrupt-names = "vsync", "lcd_sys"; - interrupts = <0 202 0>, <0 203 0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - decon_to_mic: endpoint { - remote-endpoint = <&mic_to_decon>; - }; - }; - }; -}; diff --git a/dts/Bindings/display/exynos/exynos7-decon.txt b/dts/Bindings/display/exynos/exynos7-decon.txt deleted file mode 100644 index 53912c99ec..0000000000 --- a/dts/Bindings/display/exynos/exynos7-decon.txt +++ /dev/null @@ -1,65 +0,0 @@ -Device-Tree bindings for Samsung Exynos7 SoC display controller (DECON) - -DECON (Display and Enhancement Controller) is the Display Controller for the -Exynos7 series of SoCs which transfers the image data from a video memory -buffer to an external LCD interface. - -Required properties: -- compatible: value should be "samsung,exynos7-decon"; - -- reg: physical base address and length of the DECON registers set. - -- interrupts: should contain a list of all DECON IP block interrupts in the - order: FIFO Level, VSYNC, LCD_SYSTEM. The interrupt specifier - format depends on the interrupt controller used. - -- interrupt-names: should contain the interrupt names: "fifo", "vsync", - "lcd_sys", in the same order as they were listed in the interrupts - property. - -- pinctrl-0: pin control group to be used for this controller. - -- pinctrl-names: must contain a "default" entry. - -- clocks: must include clock specifiers corresponding to entries in the - clock-names property. - -- clock-names: list of clock names sorted in the same order as the clocks - property. Must contain "pclk_decon0", "aclk_decon0", - "decon0_eclk", "decon0_vclk". -- i80-if-timings: timing configuration for lcd i80 interface support. - -Optional Properties: -- power-domains: a phandle to DECON power domain node. -- display-timings: timing settings for DECON, as described in document [1]. - Can be used in case timings cannot be provided otherwise - or to override timings provided by the panel. - -[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt - -Example: - -SoC specific DT entry: - - decon@13930000 { - compatible = "samsung,exynos7-decon"; - interrupt-parent = <&combiner>; - reg = <0x13930000 0x1000>; - interrupt-names = "lcd_sys", "vsync", "fifo"; - interrupts = <0 188 0>, <0 189 0>, <0 190 0>; - clocks = <&clock_disp PCLK_DECON_INT>, - <&clock_disp ACLK_DECON_INT>, - <&clock_disp SCLK_DECON_INT_ECLK>, - <&clock_disp SCLK_DECON_INT_EXTCLKPLL>; - clock-names = "pclk_decon0", "aclk_decon0", "decon0_eclk", - "decon0_vclk"; - status = "disabled"; - }; - -Board specific DT entry: - - decon@13930000 { - pinctrl-0 = <&lcd_clk &pwm1_out>; - pinctrl-names = "default"; - status = "okay"; - }; diff --git a/dts/Bindings/display/exynos/exynos_dp.txt b/dts/Bindings/display/exynos/exynos_dp.txt index 9b6cba3f82..3a40159032 100644 --- a/dts/Bindings/display/exynos/exynos_dp.txt +++ b/dts/Bindings/display/exynos/exynos_dp.txt @@ -50,7 +50,7 @@ Optional properties for dp-controller: Documentation/devicetree/bindings/display/panel/display-timing.txt For the below properties, please refer to Analogix DP binding document: - * Documentation/devicetree/bindings/display/bridge/analogix_dp.txt + * Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml -phys (required) -phy-names (required) -hpd-gpios (optional) diff --git a/dts/Bindings/display/exynos/exynos_dsim.txt b/dts/Bindings/display/exynos/exynos_dsim.txt deleted file mode 100644 index be377786e8..0000000000 --- a/dts/Bindings/display/exynos/exynos_dsim.txt +++ /dev/null @@ -1,90 +0,0 @@ -Exynos MIPI DSI Master - -Required properties: - - compatible: value should be one of the following - "samsung,exynos3250-mipi-dsi" /* for Exynos3250/3472 SoCs */ - "samsung,exynos4210-mipi-dsi" /* for Exynos4 SoCs */ - "samsung,exynos5410-mipi-dsi" /* for Exynos5410/5420/5440 SoCs */ - "samsung,exynos5422-mipi-dsi" /* for Exynos5422/5800 SoCs */ - "samsung,exynos5433-mipi-dsi" /* for Exynos5433 SoCs */ - - reg: physical base address and length of the registers set for the device - - interrupts: should contain DSI interrupt - - clocks: list of clock specifiers, must contain an entry for each required - entry in clock-names - - clock-names: should include "bus_clk"and "sclk_mipi" entries - the use of "pll_clk" is deprecated - - phys: list of phy specifiers, must contain an entry for each required - entry in phy-names - - phy-names: should include "dsim" entry - - vddcore-supply: MIPI DSIM Core voltage supply (e.g. 1.1V) - - vddio-supply: MIPI DSIM I/O and PLL voltage supply (e.g. 1.8V) - - samsung,pll-clock-frequency: specifies frequency of the oscillator clock - - #address-cells, #size-cells: should be set respectively to <1> and <0> - according to DSI host bindings (see MIPI DSI bindings [1]) - - samsung,burst-clock-frequency: specifies DSI frequency in high-speed burst - mode - - samsung,esc-clock-frequency: specifies DSI frequency in escape mode - -Optional properties: - - power-domains: a phandle to DSIM power domain node - -Child nodes: - Should contain DSI peripheral nodes (see MIPI DSI bindings [1]). - -Video interfaces: - Device node can contain following video interface port nodes according to [2]: - 0: RGB input, - 1: DSI output - -[1]: Documentation/devicetree/bindings/display/mipi-dsi-bus.txt -[2]: Documentation/devicetree/bindings/media/video-interfaces.txt - -Example: - - dsi@11c80000 { - compatible = "samsung,exynos4210-mipi-dsi"; - reg = <0x11C80000 0x10000>; - interrupts = <0 79 0>; - clocks = <&clock 286>, <&clock 143>; - clock-names = "bus_clk", "sclk_mipi"; - phys = <&mipi_phy 1>; - phy-names = "dsim"; - vddcore-supply = <&vusb_reg>; - vddio-supply = <&vmipi_reg>; - power-domains = <&pd_lcd0>; - #address-cells = <1>; - #size-cells = <0>; - samsung,pll-clock-frequency = <24000000>; - - panel@1 { - reg = <0>; - ... - port { - panel_ep: endpoint { - remote-endpoint = <&dsi_ep>; - }; - }; - }; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - decon_to_mic: endpoint { - remote-endpoint = <&mic_to_decon>; - }; - }; - - port@1 { - reg = <1>; - dsi_ep: endpoint { - reg = <0>; - samsung,burst-clock-frequency = <500000000>; - samsung,esc-clock-frequency = <20000000>; - remote-endpoint = <&panel_ep>; - }; - }; - }; - }; diff --git a/dts/Bindings/display/exynos/exynos_hdmi.txt b/dts/Bindings/display/exynos/exynos_hdmi.txt deleted file mode 100644 index 58b12e25bb..0000000000 --- a/dts/Bindings/display/exynos/exynos_hdmi.txt +++ /dev/null @@ -1,64 +0,0 @@ -Device-Tree bindings for drm hdmi driver - -Required properties: -- compatible: value should be one among the following: - 1) "samsung,exynos4210-hdmi" - 2) "samsung,exynos4212-hdmi" - 3) "samsung,exynos5420-hdmi" - 4) "samsung,exynos5433-hdmi" -- reg: physical base address of the hdmi and length of memory mapped - region. -- interrupts: interrupt number to the cpu. -- hpd-gpios: following information about the hotplug gpio pin. - a) phandle of the gpio controller node. - b) pin number within the gpio controller. - c) optional flags and pull up/down. -- ddc: phandle to the hdmi ddc node -- phy: phandle to the hdmi phy node -- samsung,syscon-phandle: phandle for system controller node for PMU. -- #sound-dai-cells: should be 0. - -Required properties for Exynos 4210, 4212, 5420 and 5433: -- clocks: list of clock IDs from SoC clock driver. - a) hdmi: Gate of HDMI IP bus clock. - b) sclk_hdmi: Gate of HDMI special clock. - c) sclk_pixel: Pixel special clock, one of the two possible inputs of - HDMI clock mux. - d) sclk_hdmiphy: HDMI PHY clock output, one of two possible inputs of - HDMI clock mux. - e) mout_hdmi: It is required by the driver to switch between the 2 - parents i.e. sclk_pixel and sclk_hdmiphy. If hdmiphy is stable - after configuration, parent is set to sclk_hdmiphy else - sclk_pixel. -- clock-names: aliases as per driver requirements for above clock IDs: - "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy" and "mout_hdmi". - -Required properties for Exynos 5433: -- clocks: list of clock specifiers according to common clock bindings. - a) hdmi_pclk: Gate of HDMI IP APB bus. - b) hdmi_i_pclk: Gate of HDMI-PHY IP APB bus. - d) i_tmds_clk: Gate of HDMI TMDS clock. - e) i_pixel_clk: Gate of HDMI pixel clock. - f) i_spdif_clk: Gate of HDMI SPDIF clock. - g) oscclk: Oscillator clock, used as parent of following *_user clocks - in case HDMI-PHY is not operational. - h) tmds_clko: TMDS clock generated by HDMI-PHY. - i) tmds_clko_user: MUX used to switch between oscclk and tmds_clko, - respectively if HDMI-PHY is off and operational. - j) pixel_clko: Pixel clock generated by HDMI-PHY. - k) pixel_clko_user: MUX used to switch between oscclk and pixel_clko, - respectively if HDMI-PHY is off and operational. -- clock-names: aliases for above clock specfiers. -- samsung,sysreg: handle to syscon used to control the system registers. - -Example: - - hdmi { - compatible = "samsung,exynos4212-hdmi"; - reg = <0x14530000 0x100000>; - interrupts = <0 95 0>; - hpd-gpios = <&gpx3 7 1>; - ddc = <&hdmi_ddc_node>; - phy = <&hdmi_phy_node>; - samsung,syscon-phandle = <&pmu_system_controller>; - }; diff --git a/dts/Bindings/display/exynos/exynos_hdmiddc.txt b/dts/Bindings/display/exynos/exynos_hdmiddc.txt deleted file mode 100644 index 41eee97156..0000000000 --- a/dts/Bindings/display/exynos/exynos_hdmiddc.txt +++ /dev/null @@ -1,15 +0,0 @@ -Device-Tree bindings for hdmiddc driver - -Required properties: -- compatible: value should be one of the following - 1) "samsung,exynos5-hdmiddc" <DEPRECATED> - 2) "samsung,exynos4210-hdmiddc" - -- reg: I2C address of the hdmiddc device. - -Example: - - hdmiddc { - compatible = "samsung,exynos4210-hdmiddc"; - reg = <0x50>; - }; diff --git a/dts/Bindings/display/exynos/exynos_hdmiphy.txt b/dts/Bindings/display/exynos/exynos_hdmiphy.txt deleted file mode 100644 index 162f641f76..0000000000 --- a/dts/Bindings/display/exynos/exynos_hdmiphy.txt +++ /dev/null @@ -1,15 +0,0 @@ -Device-Tree bindings for hdmiphy driver - -Required properties: -- compatible: value should be one of the following: - 1) "samsung,exynos5-hdmiphy" <DEPRECATED> - 2) "samsung,exynos4210-hdmiphy". - 3) "samsung,exynos4212-hdmiphy". -- reg: I2C address of the hdmiphy device. - -Example: - - hdmiphy { - compatible = "samsung,exynos4210-hdmiphy"; - reg = <0x38>; - }; diff --git a/dts/Bindings/display/exynos/exynos_mixer.txt b/dts/Bindings/display/exynos/exynos_mixer.txt deleted file mode 100644 index 3e38128f86..0000000000 --- a/dts/Bindings/display/exynos/exynos_mixer.txt +++ /dev/null @@ -1,26 +0,0 @@ -Device-Tree bindings for mixer driver - -Required properties: -- compatible: value should be one of the following: - 1) "samsung,exynos5-mixer" <DEPRECATED> - 2) "samsung,exynos4210-mixer" - 3) "samsung,exynos4212-mixer" - 4) "samsung,exynos5250-mixer" - 5) "samsung,exynos5420-mixer" - -- reg: physical base address of the mixer and length of memory mapped - region. -- interrupts: interrupt number to the cpu. -- clocks: list of clock IDs from SoC clock driver. - a) mixer: Gate of Mixer IP bus clock. - b) sclk_hdmi: HDMI Special clock, one of the two possible inputs of - mixer mux. - c) hdmi: Gate of HDMI IP bus clock, needed together with sclk_hdmi. - -Example: - - mixer { - compatible = "samsung,exynos5250-mixer"; - reg = <0x14450000 0x10000>; - interrupts = <0 94 0>; - }; diff --git a/dts/Bindings/display/exynos/samsung-fimd.txt b/dts/Bindings/display/exynos/samsung-fimd.txt deleted file mode 100644 index b3096421d4..0000000000 --- a/dts/Bindings/display/exynos/samsung-fimd.txt +++ /dev/null @@ -1,107 +0,0 @@ -Device-Tree bindings for Samsung SoC display controller (FIMD) - -FIMD (Fully Interactive Mobile Display) is the Display Controller for the -Samsung series of SoCs which transfers the image data from a video memory -buffer to an external LCD interface. - -Required properties: -- compatible: value should be one of the following - "samsung,s3c2443-fimd"; /* for S3C24XX SoCs */ - "samsung,s3c6400-fimd"; /* for S3C64XX SoCs */ - "samsung,s5pv210-fimd"; /* for S5PV210 SoC */ - "samsung,exynos3250-fimd"; /* for Exynos3250/3472 SoCs */ - "samsung,exynos4210-fimd"; /* for Exynos4 SoCs */ - "samsung,exynos5250-fimd"; /* for Exynos5250 SoCs */ - "samsung,exynos5420-fimd"; /* for Exynos5420/5422/5800 SoCs */ - -- reg: physical base address and length of the FIMD registers set. - -- interrupts: should contain a list of all FIMD IP block interrupts in the - order: FIFO Level, VSYNC, LCD_SYSTEM. The interrupt specifier - format depends on the interrupt controller used. - -- interrupt-names: should contain the interrupt names: "fifo", "vsync", - "lcd_sys", in the same order as they were listed in the interrupts - property. - -- pinctrl-0: pin control group to be used for this controller. - -- pinctrl-names: must contain a "default" entry. - -- clocks: must include clock specifiers corresponding to entries in the - clock-names property. - -- clock-names: list of clock names sorted in the same order as the clocks - property. Must contain "sclk_fimd" and "fimd". - -Optional Properties: -- power-domains: a phandle to FIMD power domain node. -- samsung,invert-vden: video enable signal is inverted -- samsung,invert-vclk: video clock signal is inverted -- display-timings: timing settings for FIMD, as described in document [1]. - Can be used in case timings cannot be provided otherwise - or to override timings provided by the panel. -- samsung,sysreg: handle to syscon used to control the system registers -- i80-if-timings: timing configuration for lcd i80 interface support. - - cs-setup: clock cycles for the active period of address signal is enabled - until chip select is enabled. - If not specified, the default value(0) will be used. - - wr-setup: clock cycles for the active period of CS signal is enabled until - write signal is enabled. - If not specified, the default value(0) will be used. - - wr-active: clock cycles for the active period of CS is enabled. - If not specified, the default value(1) will be used. - - wr-hold: clock cycles for the active period of CS is disabled until write - signal is disabled. - If not specified, the default value(0) will be used. - - The parameters are defined as: - - VCLK(internal) __|??????|_____|??????|_____|??????|_____|??????|_____|?? - : : : : : - Address Output --:<XXXXXXXXXXX:XXXXXXXXXXXX:XXXXXXXXXXXX:XXXXXXXXXXXX:XX - | cs-setup+1 | : : : - |<---------->| : : : - Chip Select ???????????????|____________:____________:____________|?? - | wr-setup+1 | | wr-hold+1 | - |<---------->| |<---------->| - Write Enable ????????????????????????????|____________|??????????????? - | wr-active+1| - |<---------->| - Video Data ----------------------------<XXXXXXXXXXXXXXXXXXXXXXXXX>-- - -The device node can contain 'port' child nodes according to the bindings defined -in [2]. The following are properties specific to those nodes: -- reg: (required) port index, can be: - 0 - for CAMIF0 input, - 1 - for CAMIF1 input, - 2 - for CAMIF2 input, - 3 - for parallel output, - 4 - for write-back interface - -[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt -[2]: Documentation/devicetree/bindings/media/video-interfaces.txt - -Example: - -SoC specific DT entry: - - fimd@11c00000 { - compatible = "samsung,exynos4210-fimd"; - interrupt-parent = <&combiner>; - reg = <0x11c00000 0x20000>; - interrupt-names = "fifo", "vsync", "lcd_sys"; - interrupts = <11 0>, <11 1>, <11 2>; - clocks = <&clock 140>, <&clock 283>; - clock-names = "sclk_fimd", "fimd"; - power-domains = <&pd_lcd0>; - status = "disabled"; - }; - -Board specific DT entry: - - fimd@11c00000 { - pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>; - pinctrl-names = "default"; - status = "okay"; - }; diff --git a/dts/Bindings/display/faraday,tve200.txt b/dts/Bindings/display/faraday,tve200.txt deleted file mode 100644 index 82e3bc0b74..0000000000 --- a/dts/Bindings/display/faraday,tve200.txt +++ /dev/null @@ -1,54 +0,0 @@ -* Faraday TV Encoder TVE200 - -Required properties: - -- compatible: must be one of: - "faraday,tve200" - "cortina,gemini-tvc", "faraday,tve200" - -- reg: base address and size of the control registers block - -- interrupts: contains an interrupt specifier for the interrupt - line from the TVE200 - -- clock-names: should contain "PCLK" for the clock line clocking the - silicon and "TVE" for the 27MHz clock to the video driver - -- clocks: contains phandle and clock specifier pairs for the entries - in the clock-names property. See - Documentation/devicetree/bindings/clock/clock-bindings.txt - -Optional properties: - -- resets: contains the reset line phandle for the block - -Required sub-nodes: - -- port: describes LCD panel signals, following the common binding - for video transmitter interfaces; see - Documentation/devicetree/bindings/media/video-interfaces.txt - This port should have the properties: - reg = <0>; - It should have one endpoint connected to a remote endpoint where - the display is connected. - -Example: - -display-controller@6a000000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "faraday,tve200"; - reg = <0x6a000000 0x1000>; - interrupts = <13 IRQ_TYPE_EDGE_RISING>; - resets = <&syscon GEMINI_RESET_TVC>; - clocks = <&syscon GEMINI_CLK_GATE_TVC>, - <&syscon GEMINI_CLK_TVC>; - clock-names = "PCLK", "TVE"; - - port@0 { - reg = <0>; - display_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; -}; diff --git a/dts/Bindings/display/faraday,tve200.yaml b/dts/Bindings/display/faraday,tve200.yaml new file mode 100644 index 0000000000..e2ee777673 --- /dev/null +++ b/dts/Bindings/display/faraday,tve200.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/faraday,tve200.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Faraday TV Encoder TVE200 + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +properties: + compatible: + oneOf: + - const: faraday,tve200 + - items: + - const: cortina,gemini-tvc + - const: faraday,tve200 + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + + clock-names: + items: + - const: PCLK + - const: TVE + + clocks: + minItems: 2 + + resets: + minItems: 1 + + port: + $ref: /schemas/graph.yaml#/properties/port + +required: + - compatible + - reg + - interrupts + - clock-names + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/cortina,gemini-clock.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/reset/cortina,gemini-reset.h> + display-controller@6a000000 { + compatible = "faraday,tve200"; + reg = <0x6a000000 0x1000>; + interrupts = <13 IRQ_TYPE_EDGE_RISING>; + resets = <&syscon GEMINI_RESET_TVC>; + clocks = <&syscon GEMINI_CLK_GATE_TVC>, + <&syscon GEMINI_CLK_TVC>; + clock-names = "PCLK", "TVE"; + + port { + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; diff --git a/dts/Bindings/display/fsl,lcdif.yaml b/dts/Bindings/display/fsl,lcdif.yaml new file mode 100644 index 0000000000..1c2be8d6f6 --- /dev/null +++ b/dts/Bindings/display/fsl,lcdif.yaml @@ -0,0 +1,175 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/fsl,lcdif.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale/NXP i.MX LCD Interface (LCDIF) + +maintainers: + - Marek Vasut <marex@denx.de> + - Stefan Agner <stefan@agner.ch> + +description: | + (e)LCDIF display controller found in the Freescale/NXP i.MX SoCs. + +properties: + compatible: + oneOf: + - enum: + - fsl,imx23-lcdif + - fsl,imx28-lcdif + - fsl,imx6sx-lcdif + - fsl,imx8mp-lcdif + - fsl,imx93-lcdif + - items: + - enum: + - fsl,imx6sl-lcdif + - fsl,imx6sll-lcdif + - fsl,imx6ul-lcdif + - fsl,imx7d-lcdif + - fsl,imx8mm-lcdif + - fsl,imx8mn-lcdif + - fsl,imx8mq-lcdif + - const: fsl,imx6sx-lcdif + + reg: + maxItems: 1 + + clocks: + items: + - description: Pixel clock + - description: Bus clock + - description: Display AXI clock + minItems: 1 + + clock-names: + items: + - const: pix + - const: axi + - const: disp_axi + minItems: 1 + + interrupts: + items: + - description: LCDIF DMA interrupt + - description: LCDIF Error interrupt + minItems: 1 + + power-domains: + maxItems: 1 + + port: + $ref: /schemas/graph.yaml#/properties/port + description: The LCDIF output port + +required: + - compatible + - reg + - clocks + - interrupts + - port + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + const: fsl,imx6sx-lcdif + then: + properties: + clocks: + minItems: 2 + maxItems: 3 + clock-names: + minItems: 2 + maxItems: 3 + required: + - clock-names + - if: + properties: + compatible: + contains: + enum: + - fsl,imx8mp-lcdif + - fsl,imx93-lcdif + then: + properties: + clocks: + minItems: 3 + maxItems: 3 + clock-names: + minItems: 3 + maxItems: 3 + required: + - clock-names + - if: + not: + properties: + compatible: + contains: + enum: + - fsl,imx6sx-lcdif + - fsl,imx8mp-lcdif + - fsl,imx93-lcdif + then: + properties: + clocks: + maxItems: 1 + clock-names: + maxItems: 1 + - if: + properties: + compatible: + contains: + enum: + - fsl,imx6sl-lcdif + - fsl,imx6sx-lcdif + - fsl,imx8mm-lcdif + - fsl,imx8mn-lcdif + - fsl,imx8mp-lcdif + - fsl,imx93-lcdif + then: + required: + - power-domains + - if: + properties: + compatible: + contains: + enum: + - fsl,imx23-lcdif + then: + properties: + interrupts: + minItems: 2 + maxItems: 2 + else: + properties: + interrupts: + maxItems: 1 + +examples: + - | + #include <dt-bindings/clock/imx6sx-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + display-controller@2220000 { + compatible = "fsl,imx6sx-lcdif"; + reg = <0x02220000 0x4000>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>, + <&clks IMX6SX_CLK_LCDIF_APB>, + <&clks IMX6SX_CLK_DISPLAY_AXI>; + clock-names = "pix", "axi", "disp_axi"; + power-domains = <&pd_disp>; + + port { + endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + +... diff --git a/dts/Bindings/display/ht16k33.txt b/dts/Bindings/display/ht16k33.txt deleted file mode 100644 index d5a8b070b4..0000000000 --- a/dts/Bindings/display/ht16k33.txt +++ /dev/null @@ -1,40 +0,0 @@ -Holtek ht16k33 RAM mapping 16*8 LED controller driver with keyscan -------------------------------------------------------------------------------- - -Required properties: -- compatible: "holtek,ht16k33" -- reg: I2C slave address of the chip. -- interrupts: Interrupt specification for the key pressed interrupt. -- refresh-rate-hz: Display update interval in HZ. -- debounce-delay-ms: Debouncing interval time in milliseconds. -- linux,keymap: The keymap for keys as described in the binding - document (devicetree/bindings/input/matrix-keymap.txt). - -Optional properties: -- linux,no-autorepeat: Disable keyrepeat. -- default-brightness-level: Initial brightness level [0-15] (default: 15). - -Example: - -&i2c1 { - ht16k33: ht16k33@70 { - compatible = "holtek,ht16k33"; - reg = <0x70>; - refresh-rate-hz = <20>; - debounce-delay-ms = <50>; - interrupt-parent = <&gpio4>; - interrupts = <5 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>; - linux,keymap = < - MATRIX_KEY(2, 0, KEY_F6) - MATRIX_KEY(3, 0, KEY_F8) - MATRIX_KEY(4, 0, KEY_F10) - MATRIX_KEY(5, 0, KEY_F4) - MATRIX_KEY(6, 0, KEY_F2) - MATRIX_KEY(2, 1, KEY_F5) - MATRIX_KEY(3, 1, KEY_F7) - MATRIX_KEY(4, 1, KEY_F9) - MATRIX_KEY(5, 1, KEY_F3) - MATRIX_KEY(6, 1, KEY_F1) - >; - }; -}; diff --git a/dts/Bindings/display/ilitek,ili9341.txt b/dts/Bindings/display/ilitek,ili9341.txt deleted file mode 100644 index 169b32e4ee..0000000000 --- a/dts/Bindings/display/ilitek,ili9341.txt +++ /dev/null @@ -1,27 +0,0 @@ -Ilitek ILI9341 display panels - -This binding is for display panels using an Ilitek ILI9341 controller in SPI -mode. - -Required properties: -- compatible: "adafruit,yx240qv29", "ilitek,ili9341" -- dc-gpios: D/C pin -- reset-gpios: Reset pin - -The node for this driver must be a child node of a SPI controller, hence -all mandatory properties described in ../spi/spi-bus.txt must be specified. - -Optional properties: -- rotation: panel rotation in degrees counter clockwise (0,90,180,270) -- backlight: phandle of the backlight device attached to the panel - -Example: - display@0{ - compatible = "adafruit,yx240qv29", "ilitek,ili9341"; - reg = <0>; - spi-max-frequency = <32000000>; - dc-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; - reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; - rotation = <270>; - backlight = <&backlight>; - }; diff --git a/dts/Bindings/display/ilitek,ili9486.yaml b/dts/Bindings/display/ilitek,ili9486.yaml index 66e93e5636..9cc1fd0751 100644 --- a/dts/Bindings/display/ilitek,ili9486.yaml +++ b/dts/Bindings/display/ilitek,ili9486.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/display/ilitek,ili9486.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Ilitek ILI9486 display panels device tree bindings +title: Ilitek ILI9486 display panels maintainers: - Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com> @@ -21,9 +21,9 @@ properties: items: - enum: # Waveshare 3.5" 320x480 Color TFT LCD - - waveshare,rpi-lcd-35 + - waveshare,rpi-lcd-35 # Ozzmaker 3.5" 320x480 Color TFT LCD - - ozzmaker,piscreen + - ozzmaker,piscreen - const: ilitek,ili9486 spi-max-frequency: @@ -50,10 +50,6 @@ examples: - | #include <dt-bindings/gpio/gpio.h> - backlight: backlight { - compatible = "gpio-backlight"; - gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; - }; spi { #address-cells = <1>; #size-cells = <0>; diff --git a/dts/Bindings/display/imx/fsl,imx-fb.txt b/dts/Bindings/display/imx/fsl,imx-fb.txt deleted file mode 100644 index f4df9e83bc..0000000000 --- a/dts/Bindings/display/imx/fsl,imx-fb.txt +++ /dev/null @@ -1,57 +0,0 @@ -Freescale imx21 Framebuffer - -This framebuffer driver supports devices imx1, imx21, imx25, and imx27. - -Required properties: -- compatible : "fsl,<chip>-fb", chip should be imx1 or imx21 -- reg : Should contain 1 register ranges(address and length) -- interrupts : One interrupt of the fb dev - -Required nodes: -- display: Phandle to a display node as described in - Documentation/devicetree/bindings/display/panel/display-timing.txt - Additional, the display node has to define properties: - - bits-per-pixel: Bits per pixel - - fsl,pcr: LCDC PCR value - A display node may optionally define - - fsl,aus-mode: boolean to enable AUS mode (only for imx21) - -Optional properties: -- lcd-supply: Regulator for LCD supply voltage. -- fsl,dmacr: DMA Control Register value. This is optional. By default, the - register is not modified as recommended by the datasheet. -- fsl,lpccr: Contrast Control Register value. This property provides the - default value for the contrast control register. - If that property is omitted, the register is zeroed. -- fsl,lscr1: LCDC Sharp Configuration Register value. - -Example: - - imxfb: fb@10021000 { - compatible = "fsl,imx21-fb"; - interrupts = <61>; - reg = <0x10021000 0x1000>; - display = <&display0>; - }; - - ... - - display0: display0 { - model = "Primeview-PD050VL1"; - bits-per-pixel = <16>; - fsl,pcr = <0xf0c88080>; /* non-standard but required */ - display-timings { - native-mode = <&timing_disp0>; - timing_disp0: 640x480 { - hactive = <640>; - vactive = <480>; - hback-porch = <112>; - hfront-porch = <36>; - hsync-len = <32>; - vback-porch = <33>; - vfront-porch = <33>; - vsync-len = <2>; - clock-frequency = <25000000>; - }; - }; - }; diff --git a/dts/Bindings/display/imx/fsl,imx-lcdc.yaml b/dts/Bindings/display/imx/fsl,imx-lcdc.yaml new file mode 100644 index 0000000000..c2b29622bc --- /dev/null +++ b/dts/Bindings/display/imx/fsl,imx-lcdc.yaml @@ -0,0 +1,146 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/imx/fsl,imx-lcdc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX LCD Controller, found on i.MX1, i.MX21, i.MX25 and i.MX27 + +maintainers: + - Sascha Hauer <s.hauer@pengutronix.de> + - Pengutronix Kernel Team <kernel@pengutronix.de> + +properties: + compatible: + oneOf: + - enum: + - fsl,imx1-fb + - fsl,imx21-fb + - items: + - enum: + - fsl,imx25-fb + - fsl,imx27-fb + - const: fsl,imx21-fb + - items: + - const: fsl,imx25-lcdc + - const: fsl,imx21-lcdc + + clocks: + maxItems: 3 + + clock-names: + items: + - const: ipg + - const: ahb + - const: per + + port: + $ref: /schemas/graph.yaml#/properties/port + + display: + $ref: /schemas/types.yaml#/definitions/phandle + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + lcd-supply: + description: + Regulator for LCD supply voltage. + + fsl,dmacr: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Override value for DMA Control Register + + fsl,lpccr: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Contrast Control Register value. + + fsl,lscr1: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + LCDC Sharp Configuration Register value. + +allOf: + - if: + properties: + compatible: + contains: + enum: + - fsl,imx1-lcdc + - fsl,imx21-lcdc + then: + properties: + display: false + fsl,dmacr: false + fsl,lpccr: false + fsl,lscr1: false + + required: + - port + + else: + properties: + port: false + + required: + - display + +required: + - compatible + - clocks + - clock-names + - interrupts + - reg + +additionalProperties: false + +examples: + - | + lcdc@53fbc000 { + compatible = "fsl,imx25-lcdc", "fsl,imx21-lcdc"; + reg = <0x53fbc000 0x4000>; + interrupts = <39>; + clocks = <&clks 103>, <&clks 66>, <&clks 49>; + clock-names = "ipg", "ahb", "per"; + + port { + parallel_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + - | + imxfb: fb@10021000 { + compatible = "fsl,imx21-fb"; + interrupts = <61>; + reg = <0x10021000 0x1000>; + display = <&display0>; + clocks = <&clks 103>, <&clks 49>, <&clks 66>; + clock-names = "ipg", "ahb", "per"; + }; + + display0: display0 { + model = "Primeview-PD050VL1"; + bits-per-pixel = <16>; + fsl,pcr = <0xf0c88080>; /* non-standard but required */ + + display-timings { + native-mode = <&timing_disp0>; + timing_disp0: timing0 { + hactive = <640>; + vactive = <480>; + hback-porch = <112>; + hfront-porch = <36>; + hsync-len = <32>; + vback-porch = <33>; + vfront-porch = <33>; + vsync-len = <2>; + clock-frequency = <25000000>; + }; + }; + }; diff --git a/dts/Bindings/display/imx/fsl,imx6-hdmi.yaml b/dts/Bindings/display/imx/fsl,imx6-hdmi.yaml new file mode 100644 index 0000000000..7979cf07f1 --- /dev/null +++ b/dts/Bindings/display/imx/fsl,imx6-hdmi.yaml @@ -0,0 +1,126 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/imx/fsl,imx6-hdmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX6 DWC HDMI TX Encoder + +maintainers: + - Philipp Zabel <p.zabel@pengutronix.de> + +description: | + The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP + with a companion PHY IP. + +allOf: + - $ref: ../bridge/synopsys,dw-hdmi.yaml# + +properties: + compatible: + enum: + - fsl,imx6dl-hdmi + - fsl,imx6q-hdmi + + reg-io-width: + const: 1 + + clocks: + maxItems: 2 + + clock-names: + maxItems: 2 + + ddc-i2c-bus: + $ref: /schemas/types.yaml#/definitions/phandle + description: + The HDMI DDC bus can be connected to either a system I2C master or the + functionally-reduced I2C master contained in the DWC HDMI. When connected + to a system I2C master this property contains a phandle to that I2C + master controller. + + gpr: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to the iomuxc-gpr region containing the HDMI multiplexer control + register. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: | + This device has four video ports, corresponding to the four inputs of the + HDMI multiplexer. Each port shall have a single endpoint. + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: First input of the HDMI multiplexer + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Second input of the HDMI multiplexer + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: Third input of the HDMI multiplexer + + port@3: + $ref: /schemas/graph.yaml#/properties/port + description: Fourth input of the HDMI multiplexer + + anyOf: + - required: + - port@0 + - required: + - port@1 + - required: + - port@2 + - required: + - port@3 + +required: + - compatible + - reg + - clocks + - clock-names + - gpr + - interrupts + - ports + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/imx6qdl-clock.h> + + hdmi: hdmi@120000 { + reg = <0x00120000 0x9000>; + interrupts = <0 115 0x04>; + gpr = <&gpr>; + clocks = <&clks IMX6QDL_CLK_HDMI_IAHB>, + <&clks IMX6QDL_CLK_HDMI_ISFR>; + clock-names = "iahb", "isfr"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + hdmi_mux_0: endpoint { + remote-endpoint = <&ipu1_di0_hdmi>; + }; + }; + + port@1 { + reg = <1>; + + hdmi_mux_1: endpoint { + remote-endpoint = <&ipu1_di1_hdmi>; + }; + }; + }; + }; + +... diff --git a/dts/Bindings/display/imx/fsl-imx-drm.txt b/dts/Bindings/display/imx/fsl-imx-drm.txt index 5bf77f6dd1..3c35338a28 100644 --- a/dts/Bindings/display/imx/fsl-imx-drm.txt +++ b/dts/Bindings/display/imx/fsl-imx-drm.txt @@ -12,7 +12,7 @@ Required properties: example: display-subsystem { - compatible = "fsl,display-subsystem"; + compatible = "fsl,imx-display-subsystem"; ports = <&ipu_di0>; }; @@ -68,7 +68,7 @@ Required properties: datasheet - clocks : phandle to the PRE axi clock input, as described in Documentation/devicetree/bindings/clock/clock-bindings.txt and - Documentation/devicetree/bindings/clock/imx6q-clock.txt. + Documentation/devicetree/bindings/clock/imx6q-clock.yaml. - clock-names: should be "axi" - interrupts: should contain the PRE interrupt - fsl,iram: phandle pointing to the mmio-sram device node, that should be @@ -94,7 +94,7 @@ Required properties: datasheet - clocks : phandles to the PRG ipg and axi clock inputs, as described in Documentation/devicetree/bindings/clock/clock-bindings.txt and - Documentation/devicetree/bindings/clock/imx6q-clock.txt. + Documentation/devicetree/bindings/clock/imx6q-clock.yaml. - clock-names: should be "ipg" and "axi" - fsl,pres: phandles to the PRE units attached to this PRG, with the fixed PRE as the first entry and the muxable PREs following. diff --git a/dts/Bindings/display/imx/hdmi.txt b/dts/Bindings/display/imx/hdmi.txt deleted file mode 100644 index 6d021e71c9..0000000000 --- a/dts/Bindings/display/imx/hdmi.txt +++ /dev/null @@ -1,65 +0,0 @@ -Freescale i.MX6 DWC HDMI TX Encoder -=================================== - -The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP -with a companion PHY IP. - -These DT bindings follow the Synopsys DWC HDMI TX bindings defined in -Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt with the -following device-specific properties. - - -Required properties: - -- compatible : Shall be one of "fsl,imx6q-hdmi" or "fsl,imx6dl-hdmi". -- reg: See dw_hdmi.txt. -- interrupts: HDMI interrupt number -- clocks: See dw_hdmi.txt. -- clock-names: Shall contain "iahb" and "isfr" as defined in dw_hdmi.txt. -- ports: See dw_hdmi.txt. The DWC HDMI shall have between one and four ports, - numbered 0 to 3, corresponding to the four inputs of the HDMI multiplexer. - Each port shall have a single endpoint. -- gpr : Shall contain a phandle to the iomuxc-gpr region containing the HDMI - multiplexer control register. - -Optional properties - -- ddc-i2c-bus: The HDMI DDC bus can be connected to either a system I2C master - or the functionally-reduced I2C master contained in the DWC HDMI. When - connected to a system I2C master this property contains a phandle to that - I2C master controller. - - -Example: - - gpr: iomuxc-gpr@20e0000 { - /* ... */ - }; - - hdmi: hdmi@120000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx6q-hdmi"; - reg = <0x00120000 0x9000>; - interrupts = <0 115 0x04>; - gpr = <&gpr>; - clocks = <&clks 123>, <&clks 124>; - clock-names = "iahb", "isfr"; - ddc-i2c-bus = <&i2c2>; - - port@0 { - reg = <0>; - - hdmi_mux_0: endpoint { - remote-endpoint = <&ipu1_di0_hdmi>; - }; - }; - - port@1 { - reg = <1>; - - hdmi_mux_1: endpoint { - remote-endpoint = <&ipu1_di1_hdmi>; - }; - }; - }; diff --git a/dts/Bindings/display/imx/ldb.txt b/dts/Bindings/display/imx/ldb.txt index 38c637fa39..8e6e7d7979 100644 --- a/dts/Bindings/display/imx/ldb.txt +++ b/dts/Bindings/display/imx/ldb.txt @@ -30,8 +30,8 @@ Required properties: "di2_sel" - IPU2 DI0 mux "di3_sel" - IPU2 DI1 mux The needed clock numbers for each are documented in - Documentation/devicetree/bindings/clock/imx5-clock.txt, and in - Documentation/devicetree/bindings/clock/imx6q-clock.txt. + Documentation/devicetree/bindings/clock/imx5-clock.yaml, and in + Documentation/devicetree/bindings/clock/imx6q-clock.yaml. Optional properties: - pinctrl-names : should be "default" on i.MX53, not used on i.MX6q diff --git a/dts/Bindings/display/imx/nxp,imx8mq-dcss.yaml b/dts/Bindings/display/imx/nxp,imx8mq-dcss.yaml new file mode 100644 index 0000000000..4ae6328cde --- /dev/null +++ b/dts/Bindings/display/imx/nxp,imx8mq-dcss.yaml @@ -0,0 +1,107 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 NXP +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/imx/nxp,imx8mq-dcss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: iMX8MQ Display Controller Subsystem (DCSS) + +maintainers: + - Laurentiu Palcu <laurentiu.palcu@nxp.com> + +description: + + The DCSS (display controller sub system) is used to source up to three + display buffers, compose them, and drive a display using HDMI 2.0a(with HDCP + 2.2) or MIPI-DSI. The DCSS is intended to support up to 4kp60 displays. HDR10 + image processing capabilities are included to provide a solution capable of + driving next generation high dynamic range displays. + +properties: + compatible: + const: nxp,imx8mq-dcss + + reg: + items: + - description: DCSS base address and size, up to IRQ steer start + - description: DCSS BLKCTL base address and size + + interrupts: + items: + - description: Context loader completion and error interrupt + - description: DTG interrupt used to signal context loader trigger time + - description: DTG interrupt for Vblank + + interrupt-names: + items: + - const: ctxld + - const: ctxld_kick + - const: vblank + + clocks: + items: + - description: Display APB clock for all peripheral PIO access interfaces + - description: Display AXI clock needed by DPR, Scaler, RTRAM_CTRL + - description: RTRAM clock + - description: Pixel clock, can be driven either by HDMI phy clock or MIPI + - description: DTRC clock, needed by video decompressor + + clock-names: + items: + - const: apb + - const: axi + - const: rtrm + - const: pix + - const: dtrc + + assigned-clocks: + items: + - description: Phandle and clock specifier of IMX8MQ_CLK_DISP_AXI_ROOT + - description: Phandle and clock specifier of IMX8MQ_CLK_DISP_RTRM + - description: Phandle and clock specifier of either IMX8MQ_VIDEO2_PLL1_REF_SEL or + IMX8MQ_VIDEO_PLL1_REF_SEL + + assigned-clock-parents: + items: + - description: Phandle and clock specifier of IMX8MQ_SYS1_PLL_800M + - description: Phandle and clock specifier of IMX8MQ_SYS1_PLL_800M + - description: Phandle and clock specifier of IMX8MQ_CLK_27M + + assigned-clock-rates: + items: + - description: Must be 800 MHz + - description: Must be 400 MHz + + port: + $ref: /schemas/graph.yaml#/properties/port + description: + A port node pointing to the input port of a HDMI/DP or MIPI display bridge. + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mq-clock.h> + dcss: display-controller@32e00000 { + compatible = "nxp,imx8mq-dcss"; + reg = <0x32e00000 0x2d000>, <0x32e2f000 0x1000>; + interrupts = <6>, <8>, <9>; + interrupt-names = "ctxld", "ctxld_kick", "vblank"; + interrupt-parent = <&irqsteer>; + clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>, <&clk IMX8MQ_CLK_DISP_AXI_ROOT>, + <&clk IMX8MQ_CLK_DISP_RTRM_ROOT>, <&clk IMX8MQ_VIDEO2_PLL_OUT>, + <&clk IMX8MQ_CLK_DISP_DTRC>; + clock-names = "apb", "axi", "rtrm", "pix", "dtrc"; + assigned-clocks = <&clk IMX8MQ_CLK_DISP_AXI>, <&clk IMX8MQ_CLK_DISP_RTRM>, + <&clk IMX8MQ_VIDEO2_PLL1_REF_SEL>; + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_800M>, <&clk IMX8MQ_SYS1_PLL_800M>, + <&clk IMX8MQ_CLK_27M>; + assigned-clock-rates = <800000000>, + <400000000>; + port { + dcss_out: endpoint { + remote-endpoint = <&hdmi_in>; + }; + }; + }; diff --git a/dts/Bindings/display/ingenic,ipu.yaml b/dts/Bindings/display/ingenic,ipu.yaml new file mode 100644 index 0000000000..319bd7c88f --- /dev/null +++ b/dts/Bindings/display/ingenic,ipu.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/ingenic,ipu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ingenic SoCs Image Processing Unit (IPU) + +maintainers: + - Paul Cercueil <paul@crapouillou.net> + +properties: + compatible: + oneOf: + - enum: + - ingenic,jz4725b-ipu + - ingenic,jz4760-ipu + - items: + - const: ingenic,jz4770-ipu + - const: ingenic,jz4760-ipu + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: ipu + + port: + $ref: /schemas/graph.yaml#/properties/port + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/ingenic,jz4770-cgu.h> + ipu@13080000 { + compatible = "ingenic,jz4770-ipu", "ingenic,jz4760-ipu"; + reg = <0x13080000 0x800>; + + interrupt-parent = <&intc>; + interrupts = <29>; + + clocks = <&cgu JZ4770_CLK_IPU>; + clock-names = "ipu"; + + port { + ipu_ep: endpoint { + remote-endpoint = <&lcdc_ep>; + }; + }; + }; diff --git a/dts/Bindings/display/ingenic,lcd.txt b/dts/Bindings/display/ingenic,lcd.txt deleted file mode 100644 index 01e3261def..0000000000 --- a/dts/Bindings/display/ingenic,lcd.txt +++ /dev/null @@ -1,45 +0,0 @@ -Ingenic JZ47xx LCD driver - -Required properties: -- compatible: one of: - * ingenic,jz4740-lcd - * ingenic,jz4725b-lcd - * ingenic,jz4770-lcd -- reg: LCD registers location and length -- clocks: LCD pixclock and device clock specifiers. - The device clock is only required on the JZ4740. -- clock-names: "lcd_pclk" and "lcd" -- interrupts: Specifies the interrupt line the LCD controller is connected to. - -Example: - -panel { - compatible = "sharp,ls020b1dd01d"; - - backlight = <&backlight>; - power-supply = <&vcc>; - - port { - panel_input: endpoint { - remote-endpoint = <&panel_output>; - }; - }; -}; - - -lcd: lcd-controller@13050000 { - compatible = "ingenic,jz4725b-lcd"; - reg = <0x13050000 0x1000>; - - interrupt-parent = <&intc>; - interrupts = <31>; - - clocks = <&cgu JZ4725B_CLK_LCD>; - clock-names = "lcd"; - - port { - panel_output: endpoint { - remote-endpoint = <&panel_input>; - }; - }; -}; diff --git a/dts/Bindings/display/ingenic,lcd.yaml b/dts/Bindings/display/ingenic,lcd.yaml new file mode 100644 index 0000000000..6d4c00f3fc --- /dev/null +++ b/dts/Bindings/display/ingenic,lcd.yaml @@ -0,0 +1,128 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/ingenic,lcd.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ingenic SoCs LCD controller + +maintainers: + - Paul Cercueil <paul@crapouillou.net> + +properties: + $nodename: + pattern: "^lcd-controller@[0-9a-f]+$" + + compatible: + enum: + - ingenic,jz4740-lcd + - ingenic,jz4725b-lcd + - ingenic,jz4760-lcd + - ingenic,jz4760b-lcd + - ingenic,jz4770-lcd + - ingenic,jz4780-lcd + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Pixel clock + - description: Module clock + minItems: 1 + + clock-names: + items: + - const: lcd_pclk + - const: lcd + minItems: 1 + + port: + $ref: /schemas/graph.yaml#/properties/port + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: DPI output, to interface with TFT panels. + + port@8: + $ref: /schemas/graph.yaml#/properties/port + description: Link to the Image Processing Unit (IPU). + (See ingenic,ipu.yaml). + + required: + - port@0 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +if: + properties: + compatible: + contains: + enum: + - ingenic,jz4740-lcd + - ingenic,jz4780-lcd +then: + properties: + clocks: + minItems: 2 + clock-names: + minItems: 2 +else: + properties: + clocks: + maxItems: 1 + clock-names: + maxItems: 1 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/ingenic,jz4740-cgu.h> + lcd-controller@13050000 { + compatible = "ingenic,jz4740-lcd"; + reg = <0x13050000 0x1000>; + + interrupt-parent = <&intc>; + interrupts = <30>; + + clocks = <&cgu JZ4740_CLK_LCD_PCLK>, <&cgu JZ4740_CLK_LCD>; + clock-names = "lcd_pclk", "lcd"; + + port { + endpoint { + remote-endpoint = <&panel_input>; + }; + }; + }; + + - | + #include <dt-bindings/clock/ingenic,jz4725b-cgu.h> + lcd-controller@13050000 { + compatible = "ingenic,jz4725b-lcd"; + reg = <0x13050000 0x1000>; + + interrupt-parent = <&intc>; + interrupts = <31>; + + clocks = <&cgu JZ4725B_CLK_LCD>; + clock-names = "lcd_pclk"; + + port { + endpoint { + remote-endpoint = <&panel_input>; + }; + }; + }; diff --git a/dts/Bindings/display/intel,keembay-display.yaml b/dts/Bindings/display/intel,keembay-display.yaml new file mode 100644 index 0000000000..2cf54ecc70 --- /dev/null +++ b/dts/Bindings/display/intel,keembay-display.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/intel,keembay-display.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intel Keem Bay display controller + +maintainers: + - Anitha Chrisanthus <anitha.chrisanthus@intel.com> + - Edmond J Dea <edmund.j.dea@intel.com> + +properties: + compatible: + const: intel,keembay-display + + reg: + items: + - description: LCD registers range + + reg-names: + items: + - const: lcd + + clocks: + items: + - description: LCD controller clock + - description: pll0 clock + + clock-names: + items: + - const: clk_lcd + - const: clk_pll0 + + interrupts: + maxItems: 1 + + port: + $ref: /schemas/graph.yaml#/properties/port + description: Display output node to DSI. + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - interrupts + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + display@20930000 { + compatible = "intel,keembay-display"; + reg = <0x20930000 0x3000>; + reg-names = "lcd"; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk 0x83>, + <&scmi_clk 0x0>; + clock-names = "clk_lcd", "clk_pll0"; + + port { + disp_out: endpoint { + remote-endpoint = <&dsi_in>; + }; + }; + }; diff --git a/dts/Bindings/display/intel,keembay-msscam.yaml b/dts/Bindings/display/intel,keembay-msscam.yaml new file mode 100644 index 0000000000..cc7e1f318f --- /dev/null +++ b/dts/Bindings/display/intel,keembay-msscam.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/intel,keembay-msscam.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intel Keem Bay MSSCAM + +maintainers: + - Anitha Chrisanthus <anitha.chrisanthus@intel.com> + - Edmond J Dea <edmund.j.dea@intel.com> + +description: | + MSSCAM controls local clocks in the display subsystem namely LCD clocks and + MIPI DSI clocks. It also configures the interconnect between LCD and + MIPI DSI. + +properties: + compatible: + items: + - const: intel,keembay-msscam + - const: syscon + + reg: + maxItems: 1 + + reg-io-width: + const: 4 + +required: + - compatible + - reg + - reg-io-width + +additionalProperties: false + +examples: + - | + msscam:msscam@20910000 { + compatible = "intel,keembay-msscam", "syscon"; + reg = <0x20910000 0x30>; + reg-io-width = <4>; + }; diff --git a/dts/Bindings/display/lvds-data-mapping.yaml b/dts/Bindings/display/lvds-data-mapping.yaml new file mode 100644 index 0000000000..d68982fe2e --- /dev/null +++ b/dts/Bindings/display/lvds-data-mapping.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/lvds-data-mapping.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LVDS Data Mapping + +maintainers: + - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> + - Thierry Reding <thierry.reding@gmail.com> + +description: | + LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A. Multiple + incompatible data link layers have been used over time to transmit image data + to LVDS devices. This bindings supports devices compatible with the following + specifications. + + [JEIDA] "Digital Interface Standards for Monitor", JEIDA-59-1999, February + 1999 (Version 1.0), Japan Electronic Industry Development Association (JEIDA) + [LDI] "Open LVDS Display Interface", May 1999 (Version 0.95), National + Semiconductor + [VESA] "VESA Notebook Panel Standard", October 2007 (Version 1.0), Video + Electronics Standards Association (VESA) + + Device compatible with those specifications have been marketed under the + FPD-Link and FlatLink brands. + +properties: + data-mapping: + enum: + - jeida-18 + - jeida-24 + - vesa-24 + description: | + The color signals mapping order. + + LVDS data mappings are defined as follows. + + - "jeida-18" - 18-bit data mapping compatible with the [JEIDA], [LDI] and + [VESA] specifications. Data are transferred as follows on 3 LVDS lanes. + + Slot 0 1 2 3 4 5 6 + ________________ _________________ + Clock \_______________________/ + ______ ______ ______ ______ ______ ______ ______ + DATA0 ><__G0__><__R5__><__R4__><__R3__><__R2__><__R1__><__R0__>< + DATA1 ><__B1__><__B0__><__G5__><__G4__><__G3__><__G2__><__G1__>< + DATA2 ><_CTL2_><_CTL1_><_CTL0_><__B5__><__B4__><__B3__><__B2__>< + + - "jeida-24" - 24-bit data mapping compatible with the [DSIM] and [LDI] + specifications. Data are transferred as follows on 4 LVDS lanes. + + Slot 0 1 2 3 4 5 6 + ________________ _________________ + Clock \_______________________/ + ______ ______ ______ ______ ______ ______ ______ + DATA0 ><__G2__><__R7__><__R6__><__R5__><__R4__><__R3__><__R2__>< + DATA1 ><__B3__><__B2__><__G7__><__G6__><__G5__><__G4__><__G3__>< + DATA2 ><_CTL2_><_CTL1_><_CTL0_><__B7__><__B6__><__B5__><__B4__>< + DATA3 ><_CTL3_><__B1__><__B0__><__G1__><__G0__><__R1__><__R0__>< + + - "vesa-24" - 24-bit data mapping compatible with the [VESA] specification. + Data are transferred as follows on 4 LVDS lanes. + + Slot 0 1 2 3 4 5 6 + ________________ _________________ + Clock \_______________________/ + ______ ______ ______ ______ ______ ______ ______ + DATA0 ><__G0__><__R5__><__R4__><__R3__><__R2__><__R1__><__R0__>< + DATA1 ><__B1__><__B0__><__G5__><__G4__><__G3__><__G2__><__G1__>< + DATA2 ><_CTL2_><_CTL1_><_CTL0_><__B5__><__B4__><__B3__><__B2__>< + DATA3 ><_CTL3_><__B7__><__B6__><__G7__><__G6__><__R7__><__R6__>< + + Control signals are mapped as follows. + + CTL0: HSync + CTL1: VSync + CTL2: Data Enable + CTL3: 0 + +additionalProperties: true + +... diff --git a/dts/Bindings/display/lvds.yaml b/dts/Bindings/display/lvds.yaml new file mode 100644 index 0000000000..224db49320 --- /dev/null +++ b/dts/Bindings/display/lvds.yaml @@ -0,0 +1,31 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/lvds.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LVDS Display Common Properties + +allOf: + - $ref: lvds-data-mapping.yaml# + +maintainers: + - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> + - Thierry Reding <thierry.reding@gmail.com> + +description: + This binding extends the data mapping defined in lvds-data-mapping.yaml. + It supports reversing the bit order on the formats defined there in order + to accomodate for even more specialized data formats, since a variety of + data formats and layouts is used to drive LVDS displays. + +properties: + data-mirror: + type: boolean + description: + If set, reverse the bit order described in the data mappings on all + data lanes, transmitting bits for slots 6 to 0 instead of 0 to 6. + +additionalProperties: true + +... diff --git a/dts/Bindings/display/mediatek/mediatek,aal.yaml b/dts/Bindings/display/mediatek/mediatek,aal.yaml new file mode 100644 index 0000000000..b4c28e96dd --- /dev/null +++ b/dts/Bindings/display/mediatek/mediatek,aal.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,aal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek display adaptive ambient light processor + +maintainers: + - Chun-Kuang Hu <chunkuang.hu@kernel.org> + - Philipp Zabel <p.zabel@pengutronix.de> + +description: | + Mediatek display adaptive ambient light processor, namely AAL, + is responsible for backlight power saving and sunlight visibility improving. + AAL device node must be siblings to the central MMSYS_CONFIG node. + For a description of the MMSYS_CONFIG binding, see + Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml + for details. + +properties: + compatible: + oneOf: + - enum: + - mediatek,mt8173-disp-aal + - mediatek,mt8183-disp-aal + - mediatek,mt8195-mdp3-aal + - items: + - enum: + - mediatek,mt2712-disp-aal + - mediatek,mt6795-disp-aal + - const: mediatek,mt8173-disp-aal + - items: + - enum: + - mediatek,mt8186-disp-aal + - mediatek,mt8188-disp-aal + - mediatek,mt8192-disp-aal + - mediatek,mt8195-disp-aal + - const: mediatek,mt8183-disp-aal + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + description: A phandle and PM domain specifier as defined by bindings of + the power controller specified by phandle. See + Documentation/devicetree/bindings/power/power-domain.yaml for details. + + clocks: + items: + - description: AAL Clock + + mediatek,gce-client-reg: + description: The register of client driver can be configured by gce with + 4 arguments defined in this property, such as phandle of gce, subsys id, + register offset and size. Each GCE subsys id is mapping to a client + defined in the header include/dt-bindings/gce/<chip>-gce.h. + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - power-domains + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/power/mt8173-power.h> + #include <dt-bindings/gce/mt8173-gce.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + aal@14015000 { + compatible = "mediatek,mt8173-disp-aal"; + reg = <0 0x14015000 0 0x1000>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_AAL>; + mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x5000 0x1000>; + }; + }; diff --git a/dts/Bindings/display/mediatek/mediatek,ccorr.yaml b/dts/Bindings/display/mediatek/mediatek,ccorr.yaml new file mode 100644 index 0000000000..8c2a737237 --- /dev/null +++ b/dts/Bindings/display/mediatek/mediatek,ccorr.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,ccorr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek display color correction + +maintainers: + - Chun-Kuang Hu <chunkuang.hu@kernel.org> + - Philipp Zabel <p.zabel@pengutronix.de> + +description: | + Mediatek display color correction, namely CCORR, reproduces correct color + on panels with different color gamut. + CCORR device node must be siblings to the central MMSYS_CONFIG node. + For a description of the MMSYS_CONFIG binding, see + Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml + for details. + +properties: + compatible: + oneOf: + - enum: + - mediatek,mt8183-disp-ccorr + - mediatek,mt8192-disp-ccorr + - items: + - enum: + - mediatek,mt8186-disp-ccorr + - mediatek,mt8188-disp-ccorr + - mediatek,mt8195-disp-ccorr + - const: mediatek,mt8192-disp-ccorr + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + description: A phandle and PM domain specifier as defined by bindings of + the power controller specified by phandle. See + Documentation/devicetree/bindings/power/power-domain.yaml for details. + + clocks: + items: + - description: CCORR Clock + + mediatek,gce-client-reg: + description: The register of client driver can be configured by gce with + 4 arguments defined in this property, such as phandle of gce, subsys id, + register offset and size. Each GCE subsys id is mapping to a client + defined in the header include/dt-bindings/gce/<chip>-gce.h. + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - power-domains + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/mt8183-clk.h> + #include <dt-bindings/power/mt8183-power.h> + #include <dt-bindings/gce/mt8183-gce.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + ccorr0: ccorr@1400f000 { + compatible = "mediatek,mt8183-disp-ccorr"; + reg = <0 0x1400f000 0 0x1000>; + interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_DISP_CCORR0>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xf000 0x1000>; + }; + }; diff --git a/dts/Bindings/display/mediatek/mediatek,cec.yaml b/dts/Bindings/display/mediatek/mediatek,cec.yaml new file mode 100644 index 0000000000..080cf32120 --- /dev/null +++ b/dts/Bindings/display/mediatek/mediatek,cec.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,cec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek HDMI CEC Controller + +maintainers: + - CK Hu <ck.hu@mediatek.com> + - Jitao shi <jitao.shi@mediatek.com> + +description: | + The HDMI CEC controller handles hotplug detection and CEC communication. + +properties: + compatible: + enum: + - mediatek,mt7623-cec + - mediatek,mt8167-cec + - mediatek,mt8173-cec + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + cec: cec@10013000 { + compatible = "mediatek,mt8173-cec"; + reg = <0x10013000 0xbc>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_CEC>; + }; + +... diff --git a/dts/Bindings/display/mediatek/mediatek,color.yaml b/dts/Bindings/display/mediatek/mediatek,color.yaml new file mode 100644 index 0000000000..b886ca0d89 --- /dev/null +++ b/dts/Bindings/display/mediatek/mediatek,color.yaml @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,color.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek display color processor + +maintainers: + - Chun-Kuang Hu <chunkuang.hu@kernel.org> + - Philipp Zabel <p.zabel@pengutronix.de> + +description: | + Mediatek display color processor, namely COLOR, provides hue, luma and + saturation adjustments to get better picture quality and to have one panel + resemble the other in their output characteristics. + COLOR device node must be siblings to the central MMSYS_CONFIG node. + For a description of the MMSYS_CONFIG binding, see + Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml + for details. + +properties: + compatible: + oneOf: + - enum: + - mediatek,mt2701-disp-color + - mediatek,mt8167-disp-color + - mediatek,mt8173-disp-color + - mediatek,mt8195-mdp3-color + - items: + - enum: + - mediatek,mt7623-disp-color + - mediatek,mt2712-disp-color + - const: mediatek,mt2701-disp-color + - items: + - enum: + - mediatek,mt6795-disp-color + - mediatek,mt8183-disp-color + - mediatek,mt8186-disp-color + - mediatek,mt8188-disp-color + - mediatek,mt8192-disp-color + - mediatek,mt8195-disp-color + - const: mediatek,mt8173-disp-color + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + description: A phandle and PM domain specifier as defined by bindings of + the power controller specified by phandle. See + Documentation/devicetree/bindings/power/power-domain.yaml for details. + + clocks: + items: + - description: COLOR Clock + + mediatek,gce-client-reg: + description: The register of client driver can be configured by gce with + 4 arguments defined in this property, such as phandle of gce, subsys id, + register offset and size. Each GCE subsys id is mapping to a client + defined in the header include/dt-bindings/gce/<chip>-gce.h. + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - power-domains + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/power/mt8173-power.h> + #include <dt-bindings/gce/mt8173-gce.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + color0: color@14013000 { + compatible = "mediatek,mt8173-disp-color"; + reg = <0 0x14013000 0 0x1000>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_COLOR0>; + mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x3000 0x1000>; + }; + }; diff --git a/dts/Bindings/display/mediatek/mediatek,disp.txt b/dts/Bindings/display/mediatek/mediatek,disp.txt deleted file mode 100644 index b91e709db7..0000000000 --- a/dts/Bindings/display/mediatek/mediatek,disp.txt +++ /dev/null @@ -1,209 +0,0 @@ -Mediatek display subsystem -========================== - -The Mediatek display subsystem consists of various DISP function blocks in the -MMSYS register space. The connections between them can be configured by output -and input selectors in the MMSYS_CONFIG register space. Pixel clock and start -of frame signal are distributed to the other function blocks by a DISP_MUTEX -function block. - -All DISP device tree nodes must be siblings to the central MMSYS_CONFIG node. -For a description of the MMSYS_CONFIG binding, see -Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt. - -DISP function blocks -==================== - -A display stream starts at a source function block that reads pixel data from -memory and ends with a sink function block that drives pixels on a display -interface, or writes pixels back to memory. All DISP function blocks have -their own register space, interrupt, and clock gate. The blocks that can -access memory additionally have to list the IOMMU and local arbiter they are -connected to. - -For a description of the display interface sink function blocks, see -Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt and -Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt. - -Required properties (all function blocks): -- compatible: "mediatek,<chip>-disp-<function>", one of - "mediatek,<chip>-disp-ovl" - overlay (4 layers, blending, csc) - "mediatek,<chip>-disp-ovl-2l" - overlay (2 layers, blending, csc) - "mediatek,<chip>-disp-rdma" - read DMA / line buffer - "mediatek,<chip>-disp-wdma" - write DMA - "mediatek,<chip>-disp-ccorr" - color correction - "mediatek,<chip>-disp-color" - color processor - "mediatek,<chip>-disp-dither" - dither - "mediatek,<chip>-disp-aal" - adaptive ambient light controller - "mediatek,<chip>-disp-gamma" - gamma correction - "mediatek,<chip>-disp-merge" - merge streams from two RDMA sources - "mediatek,<chip>-disp-split" - split stream to two encoders - "mediatek,<chip>-disp-ufoe" - data compression engine - "mediatek,<chip>-dsi" - DSI controller, see mediatek,dsi.txt - "mediatek,<chip>-dpi" - DPI controller, see mediatek,dpi.txt - "mediatek,<chip>-disp-mutex" - display mutex - "mediatek,<chip>-disp-od" - overdrive - the supported chips are mt2701, mt2712 and mt8173. -- reg: Physical base address and length of the function block register space -- interrupts: The interrupt signal from the function block (required, except for - merge and split function blocks). -- clocks: device clocks - See Documentation/devicetree/bindings/clock/clock-bindings.txt for details. - For most function blocks this is just a single clock input. Only the DSI and - DPI controller nodes have multiple clock inputs. These are documented in - mediatek,dsi.txt and mediatek,dpi.txt, respectively. - An exception is that the mt8183 mutex is always free running with no clocks property. - -Required properties (DMA function blocks): -- compatible: Should be one of - "mediatek,<chip>-disp-ovl" - "mediatek,<chip>-disp-rdma" - "mediatek,<chip>-disp-wdma" - the supported chips are mt2701 and mt8173. -- larb: Should contain a phandle pointing to the local arbiter device as defined - in Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt -- iommus: Should point to the respective IOMMU block with master port as - argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt - for details. - -Examples: - -mmsys: clock-controller@14000000 { - compatible = "mediatek,mt8173-mmsys", "syscon"; - reg = <0 0x14000000 0 0x1000>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; - #clock-cells = <1>; -}; - -ovl0: ovl@1400c000 { - compatible = "mediatek,mt8173-disp-ovl"; - reg = <0 0x1400c000 0 0x1000>; - interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_LOW>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; - clocks = <&mmsys CLK_MM_DISP_OVL0>; - iommus = <&iommu M4U_PORT_DISP_OVL0>; - mediatek,larb = <&larb0>; -}; - -ovl1: ovl@1400d000 { - compatible = "mediatek,mt8173-disp-ovl"; - reg = <0 0x1400d000 0 0x1000>; - interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_LOW>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; - clocks = <&mmsys CLK_MM_DISP_OVL1>; - iommus = <&iommu M4U_PORT_DISP_OVL1>; - mediatek,larb = <&larb4>; -}; - -rdma0: rdma@1400e000 { - compatible = "mediatek,mt8173-disp-rdma"; - reg = <0 0x1400e000 0 0x1000>; - interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_LOW>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; - clocks = <&mmsys CLK_MM_DISP_RDMA0>; - iommus = <&iommu M4U_PORT_DISP_RDMA0>; - mediatek,larb = <&larb0>; -}; - -rdma1: rdma@1400f000 { - compatible = "mediatek,mt8173-disp-rdma"; - reg = <0 0x1400f000 0 0x1000>; - interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_LOW>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; - clocks = <&mmsys CLK_MM_DISP_RDMA1>; - iommus = <&iommu M4U_PORT_DISP_RDMA1>; - mediatek,larb = <&larb4>; -}; - -rdma2: rdma@14010000 { - compatible = "mediatek,mt8173-disp-rdma"; - reg = <0 0x14010000 0 0x1000>; - interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_LOW>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; - clocks = <&mmsys CLK_MM_DISP_RDMA2>; - iommus = <&iommu M4U_PORT_DISP_RDMA2>; - mediatek,larb = <&larb4>; -}; - -wdma0: wdma@14011000 { - compatible = "mediatek,mt8173-disp-wdma"; - reg = <0 0x14011000 0 0x1000>; - interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_LOW>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; - clocks = <&mmsys CLK_MM_DISP_WDMA0>; - iommus = <&iommu M4U_PORT_DISP_WDMA0>; - mediatek,larb = <&larb0>; -}; - -wdma1: wdma@14012000 { - compatible = "mediatek,mt8173-disp-wdma"; - reg = <0 0x14012000 0 0x1000>; - interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_LOW>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; - clocks = <&mmsys CLK_MM_DISP_WDMA1>; - iommus = <&iommu M4U_PORT_DISP_WDMA1>; - mediatek,larb = <&larb4>; -}; - -color0: color@14013000 { - compatible = "mediatek,mt8173-disp-color"; - reg = <0 0x14013000 0 0x1000>; - interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_LOW>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; - clocks = <&mmsys CLK_MM_DISP_COLOR0>; -}; - -color1: color@14014000 { - compatible = "mediatek,mt8173-disp-color"; - reg = <0 0x14014000 0 0x1000>; - interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_LOW>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; - clocks = <&mmsys CLK_MM_DISP_COLOR1>; -}; - -aal@14015000 { - compatible = "mediatek,mt8173-disp-aal"; - reg = <0 0x14015000 0 0x1000>; - interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_LOW>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; - clocks = <&mmsys CLK_MM_DISP_AAL>; -}; - -gamma@14016000 { - compatible = "mediatek,mt8173-disp-gamma"; - reg = <0 0x14016000 0 0x1000>; - interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_LOW>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; - clocks = <&mmsys CLK_MM_DISP_GAMMA>; -}; - -ufoe@1401a000 { - compatible = "mediatek,mt8173-disp-ufoe"; - reg = <0 0x1401a000 0 0x1000>; - interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_LOW>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; - clocks = <&mmsys CLK_MM_DISP_UFOE>; -}; - -dsi0: dsi@1401b000 { - /* See mediatek,dsi.txt for details */ -}; - -dpi0: dpi@1401d000 { - /* See mediatek,dpi.txt for details */ -}; - -mutex: mutex@14020000 { - compatible = "mediatek,mt8173-disp-mutex"; - reg = <0 0x14020000 0 0x1000>; - interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_LOW>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; - clocks = <&mmsys CLK_MM_MUTEX_32K>; -}; - -od@14023000 { - compatible = "mediatek,mt8173-disp-od"; - reg = <0 0x14023000 0 0x1000>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; - clocks = <&mmsys CLK_MM_DISP_OD>; -}; diff --git a/dts/Bindings/display/mediatek/mediatek,dither.yaml b/dts/Bindings/display/mediatek/mediatek,dither.yaml new file mode 100644 index 0000000000..1588b3f7ce --- /dev/null +++ b/dts/Bindings/display/mediatek/mediatek,dither.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,dither.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek display dither processor + +maintainers: + - Chun-Kuang Hu <chunkuang.hu@kernel.org> + - Philipp Zabel <p.zabel@pengutronix.de> + +description: | + Mediatek display dither processor, namely DITHER, works by approximating + unavailable colors with available colors and by mixing and matching available + colors to mimic unavailable ones. + DITHER device node must be siblings to the central MMSYS_CONFIG node. + For a description of the MMSYS_CONFIG binding, see + Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml + for details. + +properties: + compatible: + oneOf: + - enum: + - mediatek,mt8183-disp-dither + - items: + - enum: + - mediatek,mt8186-disp-dither + - mediatek,mt8188-disp-dither + - mediatek,mt8192-disp-dither + - mediatek,mt8195-disp-dither + - const: mediatek,mt8183-disp-dither + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + description: A phandle and PM domain specifier as defined by bindings of + the power controller specified by phandle. See + Documentation/devicetree/bindings/power/power-domain.yaml for details. + + clocks: + items: + - description: DITHER Clock + + mediatek,gce-client-reg: + description: The register of client driver can be configured by gce with + 4 arguments defined in this property, such as phandle of gce, subsys id, + register offset and size. Each GCE subsys id is mapping to a client + defined in the header include/dt-bindings/gce/<chip>-gce.h. + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - power-domains + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/mt8183-clk.h> + #include <dt-bindings/power/mt8183-power.h> + #include <dt-bindings/gce/mt8183-gce.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + dither0: dither@14012000 { + compatible = "mediatek,mt8183-disp-dither"; + reg = <0 0x14012000 0 0x1000>; + interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_DISP_DITHER0>; + mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x2000 0x1000>; + }; + }; diff --git a/dts/Bindings/display/mediatek/mediatek,dp.yaml b/dts/Bindings/display/mediatek/mediatek,dp.yaml new file mode 100644 index 0000000000..2aef1eb32e --- /dev/null +++ b/dts/Bindings/display/mediatek/mediatek,dp.yaml @@ -0,0 +1,118 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,dp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Display Port Controller + +maintainers: + - Chun-Kuang Hu <chunkuang.hu@kernel.org> + - Jitao shi <jitao.shi@mediatek.com> + +description: | + MediaTek DP and eDP are different hardwares and there are some features + which are not supported for eDP. For example, audio is not supported for + eDP. Therefore, we need to use two different compatibles to describe them. + In addition, We just need to enable the power domain of DP, so the clock + of DP is generated by itself and we are not using other PLL to generate + clocks. + +properties: + compatible: + enum: + - mediatek,mt8188-dp-tx + - mediatek,mt8188-edp-tx + - mediatek,mt8195-dp-tx + - mediatek,mt8195-edp-tx + + reg: + maxItems: 1 + + nvmem-cells: + maxItems: 1 + description: efuse data for display port calibration + + nvmem-cell-names: + const: dp_calibration_data + + power-domains: + maxItems: 1 + + interrupts: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Input endpoint of the controller, usually dp_intf + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: Output endpoint of the controller + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + properties: + data-lanes: + description: | + number of lanes supported by the hardware. + The possible values: + 0 - For 1 lane enabled in IP. + 0 1 - For 2 lanes enabled in IP. + 0 1 2 3 - For 4 lanes enabled in IP. + minItems: 1 + maxItems: 4 + required: + - data-lanes + + required: + - port@0 + - port@1 + + max-linkrate-mhz: + enum: [ 1620, 2700, 5400, 8100 ] + description: maximum link rate supported by the hardware. + +required: + - compatible + - reg + - interrupts + - ports + - max-linkrate-mhz + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/mt8195-power.h> + dptx@1c600000 { + compatible = "mediatek,mt8195-dp-tx"; + reg = <0x1c600000 0x8000>; + power-domains = <&spm MT8195_POWER_DOMAIN_DP_TX>; + interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH 0>; + max-linkrate-mhz = <8100>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dptx_in: endpoint { + remote-endpoint = <&dp_intf0_out>; + }; + }; + port@1 { + reg = <1>; + dptx_out: endpoint { + data-lanes = <0 1 2 3>; + }; + }; + }; + }; diff --git a/dts/Bindings/display/mediatek/mediatek,dpi.txt b/dts/Bindings/display/mediatek/mediatek,dpi.txt deleted file mode 100644 index 58914cf681..0000000000 --- a/dts/Bindings/display/mediatek/mediatek,dpi.txt +++ /dev/null @@ -1,36 +0,0 @@ -Mediatek DPI Device -=================== - -The Mediatek DPI function block is a sink of the display subsystem and -provides 8-bit RGB/YUV444 or 8/10/10-bit YUV422 pixel data on a parallel -output bus. - -Required properties: -- compatible: "mediatek,<chip>-dpi" - the supported chips are mt2701 , mt8173 and mt8183. -- reg: Physical base address and length of the controller's registers -- interrupts: The interrupt signal from the function block. -- clocks: device clocks - See Documentation/devicetree/bindings/clock/clock-bindings.txt for details. -- clock-names: must contain "pixel", "engine", and "pll" -- port: Output port node with endpoint definitions as described in - Documentation/devicetree/bindings/graph.txt. This port should be connected - to the input port of an attached HDMI or LVDS encoder chip. - -Example: - -dpi0: dpi@1401d000 { - compatible = "mediatek,mt8173-dpi"; - reg = <0 0x1401d000 0 0x1000>; - interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>; - clocks = <&mmsys CLK_MM_DPI_PIXEL>, - <&mmsys CLK_MM_DPI_ENGINE>, - <&apmixedsys CLK_APMIXED_TVDPLL>; - clock-names = "pixel", "engine", "pll"; - - port { - dpi0_out: endpoint { - remote-endpoint = <&hdmi0_in>; - }; - }; -}; diff --git a/dts/Bindings/display/mediatek/mediatek,dpi.yaml b/dts/Bindings/display/mediatek/mediatek,dpi.yaml new file mode 100644 index 0000000000..803c00f262 --- /dev/null +++ b/dts/Bindings/display/mediatek/mediatek,dpi.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,dpi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek DPI and DP_INTF Controller + +maintainers: + - CK Hu <ck.hu@mediatek.com> + - Jitao shi <jitao.shi@mediatek.com> + +description: | + The MediaTek DPI and DP_INTF function blocks are a sink of the display + subsystem and provides 8-bit RGB/YUV444 or 8/10/10-bit YUV422 pixel data on a + parallel output bus. + +properties: + compatible: + oneOf: + - enum: + - mediatek,mt2701-dpi + - mediatek,mt7623-dpi + - mediatek,mt8173-dpi + - mediatek,mt8183-dpi + - mediatek,mt8186-dpi + - mediatek,mt8188-dp-intf + - mediatek,mt8192-dpi + - mediatek,mt8195-dp-intf + - items: + - enum: + - mediatek,mt6795-dpi + - const: mediatek,mt8183-dpi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Pixel Clock + - description: Engine Clock + - description: DPI PLL + + clock-names: + items: + - const: pixel + - const: engine + - const: pll + + pinctrl-0: true + pinctrl-1: true + + pinctrl-names: + items: + - const: default + - const: sleep + + port: + $ref: /schemas/graph.yaml#/properties/port + description: + Output port node. This port should be connected to the input port of an + attached HDMI, LVDS or DisplayPort encoder chip. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/mt8173-clk.h> + + dpi0: dpi@1401d000 { + compatible = "mediatek,mt8173-dpi"; + reg = <0x1401d000 0x1000>; + interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>; + clocks = <&mmsys CLK_MM_DPI_PIXEL>, + <&mmsys CLK_MM_DPI_ENGINE>, + <&apmixedsys CLK_APMIXED_TVDPLL>; + clock-names = "pixel", "engine", "pll"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&dpi_pin_func>; + pinctrl-1 = <&dpi_pin_idle>; + + port { + dpi0_out: endpoint { + remote-endpoint = <&hdmi0_in>; + }; + }; + }; + +... diff --git a/dts/Bindings/display/mediatek/mediatek,dsc.yaml b/dts/Bindings/display/mediatek/mediatek,dsc.yaml new file mode 100644 index 0000000000..2cbdd9ee44 --- /dev/null +++ b/dts/Bindings/display/mediatek/mediatek,dsc.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,dsc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: mediatek display DSC controller + +maintainers: + - Chun-Kuang Hu <chunkuang.hu@kernel.org> + - Philipp Zabel <p.zabel@pengutronix.de> + +description: | + The DSC standard is a specification of the algorithms used for + compressing and decompressing image display streams, including + the specification of the syntax and semantics of the compressed + video bit stream. DSC is designed for real-time systems with + real-time compression, transmission, decompression and Display. + +properties: + compatible: + oneOf: + - enum: + - mediatek,mt8195-disp-dsc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: DSC Wrapper Clock + + power-domains: + description: A phandle and PM domain specifier as defined by bindings of + the power controller specified by phandle. See + Documentation/devicetree/bindings/power/power-domain.yaml for details. + + mediatek,gce-client-reg: + description: + The register of client driver can be configured by gce with 4 arguments + defined in this property, such as phandle of gce, subsys id, + register offset and size. + Each subsys id is mapping to a base address of display function blocks + register which is defined in the gce header + include/dt-bindings/gce/<chip>-gce.h. + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - power-domains + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/mt8195-clk.h> + #include <dt-bindings/power/mt8195-power.h> + #include <dt-bindings/gce/mt8195-gce.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + dsc0: disp_dsc_wrap@1c009000 { + compatible = "mediatek,mt8195-disp-dsc"; + reg = <0 0x1c009000 0 0x1000>; + interrupts = <GIC_SPI 645 IRQ_TYPE_LEVEL_HIGH 0>; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>; + clocks = <&vdosys0 CLK_VDO0_DSC_WRAP0>; + mediatek,gce-client-reg = <&gce1 SUBSYS_1c00XXXX 0x9000 0x1000>; + }; + }; diff --git a/dts/Bindings/display/mediatek/mediatek,dsi.txt b/dts/Bindings/display/mediatek/mediatek,dsi.txt deleted file mode 100644 index a19a6cc375..0000000000 --- a/dts/Bindings/display/mediatek/mediatek,dsi.txt +++ /dev/null @@ -1,62 +0,0 @@ -Mediatek DSI Device -=================== - -The Mediatek DSI function block is a sink of the display subsystem and can -drive up to 4-lane MIPI DSI output. Two DSIs can be synchronized for dual- -channel output. - -Required properties: -- compatible: "mediatek,<chip>-dsi" - the supported chips are mt2701, mt8173 and mt8183. -- reg: Physical base address and length of the controller's registers -- interrupts: The interrupt signal from the function block. -- clocks: device clocks - See Documentation/devicetree/bindings/clock/clock-bindings.txt for details. -- clock-names: must contain "engine", "digital", and "hs" -- phys: phandle link to the MIPI D-PHY controller. -- phy-names: must contain "dphy" -- port: Output port node with endpoint definitions as described in - Documentation/devicetree/bindings/graph.txt. This port should be connected - to the input port of an attached DSI panel or DSI-to-eDP encoder chip. - -MIPI TX Configuration Module -============================ - -The MIPI TX configuration module controls the MIPI D-PHY. - -Required properties: -- compatible: "mediatek,<chip>-mipi-tx" - the supported chips are mt2701, mt8173 and mt8183. -- reg: Physical base address and length of the controller's registers -- clocks: PLL reference clock -- clock-output-names: name of the output clock line to the DSI encoder -- #clock-cells: must be <0>; -- #phy-cells: must be <0>. - -Example: - -mipi_tx0: mipi-dphy@10215000 { - compatible = "mediatek,mt8173-mipi-tx"; - reg = <0 0x10215000 0 0x1000>; - clocks = <&clk26m>; - clock-output-names = "mipi_tx0_pll"; - #clock-cells = <0>; - #phy-cells = <0>; -}; - -dsi0: dsi@1401b000 { - compatible = "mediatek,mt8173-dsi"; - reg = <0 0x1401b000 0 0x1000>; - interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_LOW>; - clocks = <&mmsys MM_DSI0_ENGINE>, <&mmsys MM_DSI0_DIGITAL>, - <&mipi_tx0>; - clock-names = "engine", "digital", "hs"; - phys = <&mipi_tx0>; - phy-names = "dphy"; - - port { - dsi0_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; -}; diff --git a/dts/Bindings/display/mediatek/mediatek,dsi.yaml b/dts/Bindings/display/mediatek/mediatek,dsi.yaml new file mode 100644 index 0000000000..8611319bed --- /dev/null +++ b/dts/Bindings/display/mediatek/mediatek,dsi.yaml @@ -0,0 +1,125 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,dsi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek DSI Controller + +maintainers: + - Chun-Kuang Hu <chunkuang.hu@kernel.org> + - Philipp Zabel <p.zabel@pengutronix.de> + - Jitao Shi <jitao.shi@mediatek.com> + +description: | + The MediaTek DSI function block is a sink of the display subsystem and can + drive up to 4-lane MIPI DSI output. Two DSIs can be synchronized for dual- + channel output. + +allOf: + - $ref: /schemas/display/dsi-controller.yaml# + +properties: + compatible: + oneOf: + - enum: + - mediatek,mt2701-dsi + - mediatek,mt7623-dsi + - mediatek,mt8167-dsi + - mediatek,mt8173-dsi + - mediatek,mt8183-dsi + - mediatek,mt8186-dsi + - mediatek,mt8188-dsi + - items: + - enum: + - mediatek,mt6795-dsi + - const: mediatek,mt8173-dsi + - items: + - enum: + - mediatek,mt8195-dsi + - const: mediatek,mt8183-dsi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + + clocks: + items: + - description: Engine Clock + - description: Digital Clock + - description: HS Clock + + clock-names: + items: + - const: engine + - const: digital + - const: hs + + resets: + maxItems: 1 + + phys: + maxItems: 1 + + phy-names: + items: + - const: dphy + + port: + $ref: /schemas/graph.yaml#/properties/port + description: + Output port node. This port should be connected to the input + port of an attached DSI panel or DSI-to-eDP encoder chip. + +required: + - compatible + - reg + - interrupts + - power-domains + - clocks + - clock-names + - phys + - phy-names + - port + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8183-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/power/mt8183-power.h> + #include <dt-bindings/phy/phy.h> + #include <dt-bindings/reset/mt8183-resets.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + dsi0: dsi@14014000 { + compatible = "mediatek,mt8183-dsi"; + reg = <0 0x14014000 0 0x1000>; + interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_DSI0_MM>, + <&mmsys CLK_MM_DSI0_IF>, + <&mipi_tx0>; + clock-names = "engine", "digital", "hs"; + resets = <&mmsys MT8183_MMSYS_SW0_RST_B_DISP_DSI0>; + phys = <&mipi_tx0>; + phy-names = "dphy"; + port { + dsi0_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; + +... diff --git a/dts/Bindings/display/mediatek/mediatek,ethdr.yaml b/dts/Bindings/display/mediatek/mediatek,ethdr.yaml new file mode 100644 index 0000000000..677882348e --- /dev/null +++ b/dts/Bindings/display/mediatek/mediatek,ethdr.yaml @@ -0,0 +1,186 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,ethdr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Ethdr Device + +maintainers: + - Chun-Kuang Hu <chunkuang.hu@kernel.org> + - Philipp Zabel <p.zabel@pengutronix.de> + +description: + ETHDR (ET High Dynamic Range) is a MediaTek internal HDR engine and is + designed for HDR video and graphics conversion in the external display path. + It handles multiple HDR input types and performs tone mapping, color + space/color format conversion, and then combine different layers, + output the required HDR or SDR signal to the subsequent display path. + This engine is composed of two video frontends, two graphic frontends, + one video backend and a mixer. ETHDR has two DMA function blocks, DS and ADL. + These two function blocks read the pre-programmed registers from DRAM and + set them to HW in the v-blanking period. + +properties: + compatible: + oneOf: + - const: mediatek,mt8195-disp-ethdr + - items: + - const: mediatek,mt8188-disp-ethdr + - const: mediatek,mt8195-disp-ethdr + + reg: + maxItems: 7 + + reg-names: + items: + - const: mixer + - const: vdo_fe0 + - const: vdo_fe1 + - const: gfx_fe0 + - const: gfx_fe1 + - const: vdo_be + - const: adl_ds + + interrupts: + maxItems: 1 + + iommus: + minItems: 1 + maxItems: 2 + + clocks: + items: + - description: mixer clock + - description: video frontend 0 clock + - description: video frontend 1 clock + - description: graphic frontend 0 clock + - description: graphic frontend 1 clock + - description: video backend clock + - description: autodownload and menuload clock + - description: video frontend 0 async clock + - description: video frontend 1 async clock + - description: graphic frontend 0 async clock + - description: graphic frontend 1 async clock + - description: video backend async clock + - description: ethdr top clock + + clock-names: + items: + - const: mixer + - const: vdo_fe0 + - const: vdo_fe1 + - const: gfx_fe0 + - const: gfx_fe1 + - const: vdo_be + - const: adl_ds + - const: vdo_fe0_async + - const: vdo_fe1_async + - const: gfx_fe0_async + - const: gfx_fe1_async + - const: vdo_be_async + - const: ethdr_top + + power-domains: + maxItems: 1 + + resets: + items: + - description: video frontend 0 async reset + - description: video frontend 1 async reset + - description: graphic frontend 0 async reset + - description: graphic frontend 1 async reset + - description: video backend async reset + + reset-names: + items: + - const: vdo_fe0_async + - const: vdo_fe1_async + - const: gfx_fe0_async + - const: gfx_fe1_async + - const: vdo_be_async + + mediatek,gce-client-reg: + $ref: /schemas/types.yaml#/definitions/phandle-array + minItems: 1 + maxItems: 7 + description: The register of display function block to be set by gce. + There are 4 arguments in this property, gce node, subsys id, offset and + register size. The subsys id is defined in the gce header of each chips + include/dt-bindings/gce/<chip>-gce.h, mapping to the register of display + function block. + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + - power-domains + - resets + - mediatek,gce-client-reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/mt8195-clk.h> + #include <dt-bindings/gce/mt8195-gce.h> + #include <dt-bindings/memory/mt8195-memory-port.h> + #include <dt-bindings/power/mt8195-power.h> + #include <dt-bindings/reset/mt8195-resets.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + hdr-engine@1c114000 { + compatible = "mediatek,mt8195-disp-ethdr"; + reg = <0 0x1c114000 0 0x1000>, + <0 0x1c115000 0 0x1000>, + <0 0x1c117000 0 0x1000>, + <0 0x1c119000 0 0x1000>, + <0 0x1c11a000 0 0x1000>, + <0 0x1c11b000 0 0x1000>, + <0 0x1c11c000 0 0x1000>; + reg-names = "mixer", "vdo_fe0", "vdo_fe1", "gfx_fe0", "gfx_fe1", + "vdo_be", "adl_ds"; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c11XXXX 0x4000 0x1000>, + <&gce0 SUBSYS_1c11XXXX 0x5000 0x1000>, + <&gce0 SUBSYS_1c11XXXX 0x7000 0x1000>, + <&gce0 SUBSYS_1c11XXXX 0x9000 0x1000>, + <&gce0 SUBSYS_1c11XXXX 0xa000 0x1000>, + <&gce0 SUBSYS_1c11XXXX 0xb000 0x1000>, + <&gce0 SUBSYS_1c11XXXX 0xc000 0x1000>; + clocks = <&vdosys1 CLK_VDO1_DISP_MIXER>, + <&vdosys1 CLK_VDO1_HDR_VDO_FE0>, + <&vdosys1 CLK_VDO1_HDR_VDO_FE1>, + <&vdosys1 CLK_VDO1_HDR_GFX_FE0>, + <&vdosys1 CLK_VDO1_HDR_GFX_FE1>, + <&vdosys1 CLK_VDO1_HDR_VDO_BE>, + <&vdosys1 CLK_VDO1_26M_SLOW>, + <&vdosys1 CLK_VDO1_HDR_VDO_FE0_DL_ASYNC>, + <&vdosys1 CLK_VDO1_HDR_VDO_FE1_DL_ASYNC>, + <&vdosys1 CLK_VDO1_HDR_GFX_FE0_DL_ASYNC>, + <&vdosys1 CLK_VDO1_HDR_GFX_FE1_DL_ASYNC>, + <&vdosys1 CLK_VDO1_HDR_VDO_BE_DL_ASYNC>, + <&topckgen CLK_TOP_ETHDR>; + clock-names = "mixer", "vdo_fe0", "vdo_fe1", "gfx_fe0", "gfx_fe1", + "vdo_be", "adl_ds", "vdo_fe0_async", "vdo_fe1_async", + "gfx_fe0_async", "gfx_fe1_async","vdo_be_async", + "ethdr_top"; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; + iommus = <&iommu_vpp M4U_PORT_L3_HDR_DS>, + <&iommu_vpp M4U_PORT_L3_HDR_ADL>; + interrupts = <GIC_SPI 517 IRQ_TYPE_LEVEL_HIGH 0>; /* disp mixer */ + resets = <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_FE0_DL_ASYNC>, + <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_FE1_DL_ASYNC>, + <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_GFX_FE0_DL_ASYNC>, + <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_GFX_FE1_DL_ASYNC>, + <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_BE_DL_ASYNC>; + reset-names = "vdo_fe0_async", "vdo_fe1_async", "gfx_fe0_async", + "gfx_fe1_async", "vdo_be_async"; + }; + }; +... diff --git a/dts/Bindings/display/mediatek/mediatek,gamma.yaml b/dts/Bindings/display/mediatek/mediatek,gamma.yaml new file mode 100644 index 0000000000..c6641acd75 --- /dev/null +++ b/dts/Bindings/display/mediatek/mediatek,gamma.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,gamma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek display gamma correction + +maintainers: + - Chun-Kuang Hu <chunkuang.hu@kernel.org> + - Philipp Zabel <p.zabel@pengutronix.de> + +description: | + Mediatek display gamma correction, namely GAMMA, provides a nonlinear + operation used to adjust luminance in display system. + GAMMA device node must be siblings to the central MMSYS_CONFIG node. + For a description of the MMSYS_CONFIG binding, see + Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml + for details. + +properties: + compatible: + oneOf: + - enum: + - mediatek,mt8173-disp-gamma + - mediatek,mt8183-disp-gamma + - items: + - enum: + - mediatek,mt6795-disp-gamma + - const: mediatek,mt8173-disp-gamma + - items: + - enum: + - mediatek,mt8186-disp-gamma + - mediatek,mt8188-disp-gamma + - mediatek,mt8192-disp-gamma + - mediatek,mt8195-disp-gamma + - const: mediatek,mt8183-disp-gamma + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + description: A phandle and PM domain specifier as defined by bindings of + the power controller specified by phandle. See + Documentation/devicetree/bindings/power/power-domain.yaml for details. + + clocks: + items: + - description: GAMMA Clock + + mediatek,gce-client-reg: + description: The register of client driver can be configured by gce with + 4 arguments defined in this property, such as phandle of gce, subsys id, + register offset and size. Each GCE subsys id is mapping to a client + defined in the header include/dt-bindings/gce/<chip>-gce.h. + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - power-domains + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/power/mt8173-power.h> + #include <dt-bindings/gce/mt8173-gce.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + gamma@14016000 { + compatible = "mediatek,mt8173-disp-gamma"; + reg = <0 0x14016000 0 0x1000>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_GAMMA>; + mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x6000 0x1000>; + }; + }; diff --git a/dts/Bindings/display/mediatek/mediatek,hdmi-ddc.yaml b/dts/Bindings/display/mediatek/mediatek,hdmi-ddc.yaml new file mode 100644 index 0000000000..bd8f7b8ae0 --- /dev/null +++ b/dts/Bindings/display/mediatek/mediatek,hdmi-ddc.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,hdmi-ddc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek HDMI DDC + +maintainers: + - CK Hu <ck.hu@mediatek.com> + - Jitao shi <jitao.shi@mediatek.com> + +description: | + The HDMI DDC i2c controller is used to interface with the HDMI DDC pins. + +properties: + compatible: + enum: + - mediatek,mt7623-hdmi-ddc + - mediatek,mt8167-hdmi-ddc + - mediatek,mt8173-hdmi-ddc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: ddc-i2c + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + hdmi_ddc0: i2c@11012000 { + compatible = "mediatek,mt8173-hdmi-ddc"; + reg = <0x11012000 0x1c>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_I2C5>; + clock-names = "ddc-i2c"; + }; + +... diff --git a/dts/Bindings/display/mediatek/mediatek,hdmi.txt b/dts/Bindings/display/mediatek/mediatek,hdmi.txt deleted file mode 100644 index 7b124242b0..0000000000 --- a/dts/Bindings/display/mediatek/mediatek,hdmi.txt +++ /dev/null @@ -1,148 +0,0 @@ -Mediatek HDMI Encoder -===================== - -The Mediatek HDMI encoder can generate HDMI 1.4a or MHL 2.0 signals from -its parallel input. - -Required properties: -- compatible: Should be "mediatek,<chip>-hdmi". -- reg: Physical base address and length of the controller's registers -- interrupts: The interrupt signal from the function block. -- clocks: device clocks - See Documentation/devicetree/bindings/clock/clock-bindings.txt for details. -- clock-names: must contain "pixel", "pll", "bclk", and "spdif". -- phys: phandle link to the HDMI PHY node. - See Documentation/devicetree/bindings/phy/phy-bindings.txt for details. -- phy-names: must contain "hdmi" -- mediatek,syscon-hdmi: phandle link and register offset to the system - configuration registers. For mt8173 this must be offset 0x900 into the - MMSYS_CONFIG region: <&mmsys 0x900>. -- ports: A node containing input and output port nodes with endpoint - definitions as documented in Documentation/devicetree/bindings/graph.txt. -- port@0: The input port in the ports node should be connected to a DPI output - port. -- port@1: The output port in the ports node should be connected to the input - port of a connector node that contains a ddc-i2c-bus property, or to the - input port of an attached bridge chip, such as a SlimPort transmitter. - -HDMI CEC -======== - -The HDMI CEC controller handles hotplug detection and CEC communication. - -Required properties: -- compatible: Should be "mediatek,<chip>-cec" -- reg: Physical base address and length of the controller's registers -- interrupts: The interrupt signal from the function block. -- clocks: device clock - -HDMI DDC -======== - -The HDMI DDC i2c controller is used to interface with the HDMI DDC pins. -The Mediatek's I2C controller is used to interface with I2C devices. - -Required properties: -- compatible: Should be "mediatek,<chip>-hdmi-ddc" -- reg: Physical base address and length of the controller's registers -- clocks: device clock -- clock-names: Should be "ddc-i2c". - -HDMI PHY -======== - -The HDMI PHY serializes the HDMI encoder's three channel 10-bit parallel -output and drives the HDMI pads. - -Required properties: -- compatible: "mediatek,<chip>-hdmi-phy" -- reg: Physical base address and length of the module's registers -- clocks: PLL reference clock -- clock-names: must contain "pll_ref" -- clock-output-names: must be "hdmitx_dig_cts" on mt8173 -- #phy-cells: must be <0> -- #clock-cells: must be <0> - -Optional properties: -- mediatek,ibias: TX DRV bias current for <1.65Gbps, defaults to 0xa -- mediatek,ibias_up: TX DRV bias current for >1.65Gbps, defaults to 0x1c - -Example: - -cec: cec@10013000 { - compatible = "mediatek,mt8173-cec"; - reg = <0 0x10013000 0 0xbc>; - interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_LOW>; - clocks = <&infracfg CLK_INFRA_CEC>; -}; - -hdmi_phy: hdmi-phy@10209100 { - compatible = "mediatek,mt8173-hdmi-phy"; - reg = <0 0x10209100 0 0x24>; - clocks = <&apmixedsys CLK_APMIXED_HDMI_REF>; - clock-names = "pll_ref"; - clock-output-names = "hdmitx_dig_cts"; - mediatek,ibias = <0xa>; - mediatek,ibias_up = <0x1c>; - #clock-cells = <0>; - #phy-cells = <0>; -}; - -hdmi_ddc0: i2c@11012000 { - compatible = "mediatek,mt8173-hdmi-ddc"; - reg = <0 0x11012000 0 0x1c>; - interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>; - clocks = <&pericfg CLK_PERI_I2C5>; - clock-names = "ddc-i2c"; -}; - -hdmi0: hdmi@14025000 { - compatible = "mediatek,mt8173-hdmi"; - reg = <0 0x14025000 0 0x400>; - interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_LOW>; - clocks = <&mmsys CLK_MM_HDMI_PIXEL>, - <&mmsys CLK_MM_HDMI_PLLCK>, - <&mmsys CLK_MM_HDMI_AUDIO>, - <&mmsys CLK_MM_HDMI_SPDIF>; - clock-names = "pixel", "pll", "bclk", "spdif"; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_pin>; - phys = <&hdmi_phy>; - phy-names = "hdmi"; - mediatek,syscon-hdmi = <&mmsys 0x900>; - assigned-clocks = <&topckgen CLK_TOP_HDMI_SEL>; - assigned-clock-parents = <&hdmi_phy>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - hdmi0_in: endpoint { - remote-endpoint = <&dpi0_out>; - }; - }; - - port@1 { - reg = <1>; - - hdmi0_out: endpoint { - remote-endpoint = <&hdmi_con_in>; - }; - }; - }; -}; - -connector { - compatible = "hdmi-connector"; - type = "a"; - ddc-i2c-bus = <&hdmiddc0>; - - port { - hdmi_con_in: endpoint { - remote-endpoint = <&hdmi0_out>; - }; - }; -}; diff --git a/dts/Bindings/display/mediatek/mediatek,hdmi.yaml b/dts/Bindings/display/mediatek/mediatek,hdmi.yaml new file mode 100644 index 0000000000..b90b6d18a8 --- /dev/null +++ b/dts/Bindings/display/mediatek/mediatek,hdmi.yaml @@ -0,0 +1,136 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,hdmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek HDMI Encoder + +maintainers: + - CK Hu <ck.hu@mediatek.com> + - Jitao shi <jitao.shi@mediatek.com> + +description: | + The Mediatek HDMI encoder can generate HDMI 1.4a or MHL 2.0 signals from + its parallel input. + +properties: + compatible: + enum: + - mediatek,mt2701-hdmi + - mediatek,mt7623-hdmi + - mediatek,mt8167-hdmi + - mediatek,mt8173-hdmi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Pixel Clock + - description: HDMI PLL + - description: Bit Clock + - description: S/PDIF Clock + + clock-names: + items: + - const: pixel + - const: pll + - const: bclk + - const: spdif + + phys: + maxItems: 1 + + phy-names: + items: + - const: hdmi + + mediatek,syscon-hdmi: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to system configuration registers + - description: register offset in the system configuration registers + description: | + phandle link and register offset to the system configuration registers. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: | + Input port node. This port should be connected to a DPI output port. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: | + Output port node. This port should be connected to the input port of a connector + node that contains a ddc-i2c-bus property, or to the input port of an attached + bridge chip, such as a SlimPort transmitter. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - phys + - phy-names + - mediatek,syscon-hdmi + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + hdmi0: hdmi@14025000 { + compatible = "mediatek,mt8173-hdmi"; + reg = <0x14025000 0x400>; + interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_LOW>; + clocks = <&mmsys CLK_MM_HDMI_PIXEL>, + <&mmsys CLK_MM_HDMI_PLLCK>, + <&mmsys CLK_MM_HDMI_AUDIO>, + <&mmsys CLK_MM_HDMI_SPDIF>; + clock-names = "pixel", "pll", "bclk", "spdif"; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_pin>; + phys = <&hdmi_phy>; + phy-names = "hdmi"; + mediatek,syscon-hdmi = <&mmsys 0x900>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + hdmi0_in: endpoint { + remote-endpoint = <&dpi0_out>; + }; + }; + + port@1 { + reg = <1>; + + hdmi0_out: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; + }; + }; + }; + +... diff --git a/dts/Bindings/display/mediatek/mediatek,merge.yaml b/dts/Bindings/display/mediatek/mediatek,merge.yaml new file mode 100644 index 0000000000..dae8392799 --- /dev/null +++ b/dts/Bindings/display/mediatek/mediatek,merge.yaml @@ -0,0 +1,110 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,merge.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek display merge + +maintainers: + - Chun-Kuang Hu <chunkuang.hu@kernel.org> + - Philipp Zabel <p.zabel@pengutronix.de> + +description: | + Mediatek display merge, namely MERGE, is used to merge two slice-per-line + inputs into one side-by-side output. + MERGE device node must be siblings to the central MMSYS_CONFIG node. + For a description of the MMSYS_CONFIG binding, see + Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml + for details. + +properties: + compatible: + oneOf: + - enum: + - mediatek,mt8173-disp-merge + - mediatek,mt8195-disp-merge + - mediatek,mt8195-mdp3-merge + - items: + - const: mediatek,mt6795-disp-merge + - const: mediatek,mt8173-disp-merge + - items: + - const: mediatek,mt8188-disp-merge + - const: mediatek,mt8195-disp-merge + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + description: A phandle and PM domain specifier as defined by bindings of + the power controller specified by phandle. See + Documentation/devicetree/bindings/power/power-domain.yaml for details. + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + oneOf: + - items: + - const: merge + - items: + - const: merge + - const: merge_async + + mediatek,merge-fifo-en: + description: + The setting of merge fifo is mainly provided for the display latency + buffer to ensure that the back-end panel display data will not be + underrun, a little more data is needed in the fifo. + According to the merge fifo settings, when the water level is detected + to be insufficient, it will trigger RDMA sending ultra and preulra + command to SMI to speed up the data rate. + type: boolean + + mediatek,merge-mute: + description: Support mute function. Mute the content of merge output. + type: boolean + + mediatek,gce-client-reg: + description: The register of client driver can be configured by gce with + 4 arguments defined in this property, such as phandle of gce, subsys id, + register offset and size. Each GCE subsys id is mapping to a client + defined in the header include/dt-bindings/gce/<chip>-gce.h. + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 + + resets: + description: reset controller + See Documentation/devicetree/bindings/reset/reset.txt for details. + maxItems: 1 + +required: + - compatible + - reg + - power-domains + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/power/mt8173-power.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + merge@14017000 { + compatible = "mediatek,mt8173-disp-merge"; + reg = <0 0x14017000 0 0x1000>; + power-domains = <&spm MT8173_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_MERGE>; + clock-names = "merge"; + }; + }; diff --git a/dts/Bindings/display/mediatek/mediatek,od.yaml b/dts/Bindings/display/mediatek/mediatek,od.yaml new file mode 100644 index 0000000000..831c653caf --- /dev/null +++ b/dts/Bindings/display/mediatek/mediatek,od.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,od.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek display overdirve + +maintainers: + - Chun-Kuang Hu <chunkuang.hu@kernel.org> + - Philipp Zabel <p.zabel@pengutronix.de> + +description: | + Mediatek display overdrive, namely OD, increases the transition values + of pixels between consecutive frames to make LCD rotate faster. + OD device node must be siblings to the central MMSYS_CONFIG node. + For a description of the MMSYS_CONFIG binding, see + Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml + for details. + +properties: + compatible: + oneOf: + - enum: + - mediatek,mt2712-disp-od + - mediatek,mt8173-disp-od + - items: + - const: mediatek,mt6795-disp-od + - const: mediatek,mt8173-disp-od + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: OD Clock + +required: + - compatible + - reg + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8173-clk.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + od@14023000 { + compatible = "mediatek,mt8173-disp-od"; + reg = <0 0x14023000 0 0x1000>; + clocks = <&mmsys CLK_MM_DISP_OD>; + }; + }; diff --git a/dts/Bindings/display/mediatek/mediatek,ovl-2l.yaml b/dts/Bindings/display/mediatek/mediatek,ovl-2l.yaml new file mode 100644 index 0000000000..c7dd0ef02d --- /dev/null +++ b/dts/Bindings/display/mediatek/mediatek,ovl-2l.yaml @@ -0,0 +1,91 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,ovl-2l.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek display overlay 2 layer + +maintainers: + - Chun-Kuang Hu <chunkuang.hu@kernel.org> + - Philipp Zabel <p.zabel@pengutronix.de> + +description: | + Mediatek display overlay 2 layer, namely OVL-2L, provides 2 more layer + for OVL. + OVL-2L device node must be siblings to the central MMSYS_CONFIG node. + For a description of the MMSYS_CONFIG binding, see + Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml + for details. + +properties: + compatible: + oneOf: + - enum: + - mediatek,mt8183-disp-ovl-2l + - mediatek,mt8192-disp-ovl-2l + - items: + - enum: + - mediatek,mt8186-disp-ovl-2l + - const: mediatek,mt8192-disp-ovl-2l + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + description: A phandle and PM domain specifier as defined by bindings of + the power controller specified by phandle. See + Documentation/devicetree/bindings/power/power-domain.yaml for details. + + clocks: + items: + - description: OVL-2L Clock + + iommus: + description: + This property should point to the respective IOMMU block with master port as argument, + see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details. + + mediatek,gce-client-reg: + description: The register of client driver can be configured by gce with + 4 arguments defined in this property, such as phandle of gce, subsys id, + register offset and size. Each GCE subsys id is mapping to a client + defined in the header include/dt-bindings/gce/<chip>-gce.h. + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - power-domains + - clocks + - iommus + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/mt8183-clk.h> + #include <dt-bindings/power/mt8183-power.h> + #include <dt-bindings/gce/mt8183-gce.h> + #include <dt-bindings/memory/mt8183-larb-port.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + ovl_2l0: ovl@14009000 { + compatible = "mediatek,mt8183-disp-ovl-2l"; + reg = <0 0x14009000 0 0x1000>; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_DISP_OVL0_2L>; + iommus = <&iommu M4U_PORT_DISP_2L_OVL0_LARB0>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x9000 0x1000>; + }; + }; diff --git a/dts/Bindings/display/mediatek/mediatek,ovl.yaml b/dts/Bindings/display/mediatek/mediatek,ovl.yaml new file mode 100644 index 0000000000..c471a181d1 --- /dev/null +++ b/dts/Bindings/display/mediatek/mediatek,ovl.yaml @@ -0,0 +1,108 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,ovl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek display overlay + +maintainers: + - Chun-Kuang Hu <chunkuang.hu@kernel.org> + - Philipp Zabel <p.zabel@pengutronix.de> + +description: | + Mediatek display overlay, namely OVL, can do alpha blending from + the memory. + OVL device node must be siblings to the central MMSYS_CONFIG node. + For a description of the MMSYS_CONFIG binding, see + Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml + for details. + +properties: + compatible: + oneOf: + - enum: + - mediatek,mt2701-disp-ovl + - mediatek,mt8173-disp-ovl + - mediatek,mt8183-disp-ovl + - mediatek,mt8192-disp-ovl + - mediatek,mt8195-mdp3-ovl + - items: + - enum: + - mediatek,mt7623-disp-ovl + - mediatek,mt2712-disp-ovl + - const: mediatek,mt2701-disp-ovl + - items: + - enum: + - mediatek,mt6795-disp-ovl + - const: mediatek,mt8173-disp-ovl + - items: + - enum: + - mediatek,mt8188-disp-ovl + - mediatek,mt8195-disp-ovl + - const: mediatek,mt8183-disp-ovl + - items: + - enum: + - mediatek,mt8186-disp-ovl + - const: mediatek,mt8192-disp-ovl + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + description: A phandle and PM domain specifier as defined by bindings of + the power controller specified by phandle. See + Documentation/devicetree/bindings/power/power-domain.yaml for details. + + clocks: + items: + - description: OVL Clock + + iommus: + description: + This property should point to the respective IOMMU block with master port as argument, + see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details. + + mediatek,gce-client-reg: + description: The register of client driver can be configured by gce with + 4 arguments defined in this property, such as phandle of gce, subsys id, + register offset and size. Each GCE subsys id is mapping to a client + defined in the header include/dt-bindings/gce/<chip>-gce.h. + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - power-domains + - clocks + - iommus + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/power/mt8173-power.h> + #include <dt-bindings/gce/mt8173-gce.h> + #include <dt-bindings/memory/mt8173-larb-port.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + ovl0: ovl@1400c000 { + compatible = "mediatek,mt8173-disp-ovl"; + reg = <0 0x1400c000 0 0x1000>; + interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_OVL0>; + iommus = <&iommu M4U_PORT_DISP_OVL0>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>; + }; + }; diff --git a/dts/Bindings/display/mediatek/mediatek,padding.yaml b/dts/Bindings/display/mediatek/mediatek,padding.yaml new file mode 100644 index 0000000000..be07bbdc54 --- /dev/null +++ b/dts/Bindings/display/mediatek/mediatek,padding.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,padding.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Display Padding + +maintainers: + - Chun-Kuang Hu <chunkuang.hu@kernel.org> + - Philipp Zabel <p.zabel@pengutronix.de> + +description: + Padding provides ability to add pixels to width and height of a layer with + specified colors. Due to hardware design, Mixer in VDOSYS1 requires + width of a layer to be 2-pixel-align, or 4-pixel-align when ETHDR is enabled, + we need Padding to deal with odd width. + Please notice that even if the Padding is in bypass mode, settings in + register must be cleared to 0, or undefined behaviors could happen. + +properties: + compatible: + enum: + - mediatek,mt8188-disp-padding + - mediatek,mt8195-mdp3-padding + + reg: + maxItems: 1 + + power-domains: + maxItems: 1 + + clocks: + items: + - description: Padding's clocks + + mediatek,gce-client-reg: + description: + GCE (Global Command Engine) is a multi-core micro processor that helps + its clients to execute commands without interrupting CPU. This property + describes GCE client's information that is composed by 4 fields. + 1. Phandle of the GCE (there may be several GCE processors) + 2. Sub-system ID defined in the dt-binding like a user ID + (Please refer to include/dt-bindings/gce/<chip>-gce.h) + 3. Offset from base address of the subsys you are at + 4. Size of the register the client needs + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + items: + - description: Phandle of the GCE + - description: Subsys ID defined in the dt-binding + - description: Offset from base address of the subsys + - description: Size of register + maxItems: 1 + +required: + - compatible + - reg + - power-domains + - clocks + - mediatek,gce-client-reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/mediatek,mt8188-clk.h> + #include <dt-bindings/power/mediatek,mt8188-power.h> + #include <dt-bindings/gce/mt8195-gce.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + padding0: padding@1c11d000 { + compatible = "mediatek,mt8188-disp-padding"; + reg = <0 0x1c11d000 0 0x1000>; + clocks = <&vdosys1 CLK_VDO1_PADDING0>; + power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c11XXXX 0xd000 0x1000>; + }; + }; diff --git a/dts/Bindings/display/mediatek/mediatek,postmask.yaml b/dts/Bindings/display/mediatek/mediatek,postmask.yaml new file mode 100644 index 0000000000..11fe32e50a --- /dev/null +++ b/dts/Bindings/display/mediatek/mediatek,postmask.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,postmask.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek display postmask + +maintainers: + - Chun-Kuang Hu <chunkuang.hu@kernel.org> + - Philipp Zabel <p.zabel@pengutronix.de> + +description: | + Mediatek display postmask, namely POSTMASK, provides round corner pattern + generation. + POSTMASK device node must be siblings to the central MMSYS_CONFIG node. + For a description of the MMSYS_CONFIG binding, see + Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml + for details. + +properties: + compatible: + oneOf: + - enum: + - mediatek,mt8192-disp-postmask + - items: + - enum: + - mediatek,mt8186-disp-postmask + - mediatek,mt8188-disp-postmask + - const: mediatek,mt8192-disp-postmask + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + description: A phandle and PM domain specifier as defined by bindings of + the power controller specified by phandle. See + Documentation/devicetree/bindings/power/power-domain.yaml for details. + + clocks: + items: + - description: POSTMASK Clock + + mediatek,gce-client-reg: + description: The register of client driver can be configured by gce with + 4 arguments defined in this property, such as phandle of gce, subsys id, + register offset and size. Each GCE subsys id is mapping to a client + defined in the header include/dt-bindings/gce/<chip>-gce.h. + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - power-domains + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/mt8192-clk.h> + #include <dt-bindings/power/mt8192-power.h> + #include <dt-bindings/gce/mt8192-gce.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + postmask0: postmask@1400d000 { + compatible = "mediatek,mt8192-disp-postmask"; + reg = <0 0x1400d000 0 0x1000>; + interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH 0>; + power-domains = <&scpsys MT8192_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_DISP_POSTMASK0>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xd000 0x1000>; + }; + }; diff --git a/dts/Bindings/display/mediatek/mediatek,rdma.yaml b/dts/Bindings/display/mediatek/mediatek,rdma.yaml new file mode 100644 index 0000000000..39dbb5c8bc --- /dev/null +++ b/dts/Bindings/display/mediatek/mediatek,rdma.yaml @@ -0,0 +1,121 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,rdma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek Read Direct Memory Access + +maintainers: + - Chun-Kuang Hu <chunkuang.hu@kernel.org> + - Philipp Zabel <p.zabel@pengutronix.de> + +description: | + Mediatek Read Direct Memory Access(RDMA) component used to read the + data into DMA. It provides real time data to the back-end panel + driver, such as DSI, DPI and DP_INTF. + It contains one line buffer to store the sufficient pixel data. + RDMA device node must be siblings to the central MMSYS_CONFIG node. + For a description of the MMSYS_CONFIG binding, see + Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml + for details. + +properties: + compatible: + oneOf: + - enum: + - mediatek,mt2701-disp-rdma + - mediatek,mt8173-disp-rdma + - mediatek,mt8183-disp-rdma + - mediatek,mt8195-disp-rdma + - items: + - enum: + - mediatek,mt8188-disp-rdma + - const: mediatek,mt8195-disp-rdma + - items: + - enum: + - mediatek,mt7623-disp-rdma + - mediatek,mt2712-disp-rdma + - const: mediatek,mt2701-disp-rdma + - items: + - enum: + - mediatek,mt6795-disp-rdma + - const: mediatek,mt8173-disp-rdma + - items: + - enum: + - mediatek,mt8186-disp-rdma + - mediatek,mt8192-disp-rdma + - const: mediatek,mt8183-disp-rdma + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + description: A phandle and PM domain specifier as defined by bindings of + the power controller specified by phandle. See + Documentation/devicetree/bindings/power/power-domain.yaml for details. + + clocks: + items: + - description: RDMA Clock + + iommus: + description: + This property should point to the respective IOMMU block with master port as argument, + see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details. + + mediatek,rdma-fifo-size: + description: + rdma fifo size may be different even in same SOC, add this property to the + corresponding rdma. + The value below is the Max value which defined in hardware data sheet + mediatek,rdma-fifo-size of mt8173-rdma0 is 8K + mediatek,rdma-fifo-size of mt8183-rdma0 is 5K + mediatek,rdma-fifo-size of mt8183-rdma1 is 2K + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [8192, 5120, 2048] + + mediatek,gce-client-reg: + description: The register of client driver can be configured by gce with + 4 arguments defined in this property, such as phandle of gce, subsys id, + register offset and size. Each GCE subsys id is mapping to a client + defined in the header include/dt-bindings/gce/<chip>-gce.h. + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - power-domains + - clocks + - iommus + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/power/mt8173-power.h> + #include <dt-bindings/gce/mt8173-gce.h> + #include <dt-bindings/memory/mt8173-larb-port.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + rdma0: rdma@1400e000 { + compatible = "mediatek,mt8173-disp-rdma"; + reg = <0 0x1400e000 0 0x1000>; + interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_RDMA0>; + iommus = <&iommu M4U_PORT_DISP_RDMA0>; + mediatek,rdma-fifo-size = <8192>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>; + }; + }; diff --git a/dts/Bindings/display/mediatek/mediatek,split.yaml b/dts/Bindings/display/mediatek/mediatek,split.yaml new file mode 100644 index 0000000000..e4affc854f --- /dev/null +++ b/dts/Bindings/display/mediatek/mediatek,split.yaml @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,split.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek display split + +maintainers: + - Chun-Kuang Hu <chunkuang.hu@kernel.org> + - Philipp Zabel <p.zabel@pengutronix.de> + +description: | + Mediatek display split, namely SPLIT, is used to split stream to two + encoders. + SPLIT device node must be siblings to the central MMSYS_CONFIG node. + For a description of the MMSYS_CONFIG binding, see + Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml + for details. + +properties: + compatible: + oneOf: + - enum: + - mediatek,mt8173-disp-split + - mediatek,mt8195-mdp3-split + - items: + - const: mediatek,mt6795-disp-split + - const: mediatek,mt8173-disp-split + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + description: A phandle and PM domain specifier as defined by bindings of + the power controller specified by phandle. See + Documentation/devicetree/bindings/power/power-domain.yaml for details. + + mediatek,gce-client-reg: + description: + The register of display function block to be set by gce. There are 4 arguments, + such as gce node, subsys id, offset and register size. The subsys id that is + mapping to the register of display function blocks is defined in the gce header + include/dt-bindings/gce/<chip>-gce.h of each chips. + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + items: + - description: phandle of GCE + - description: GCE subsys id + - description: register offset + - description: register size + maxItems: 1 + + clocks: + items: + - description: SPLIT Clock + +required: + - compatible + - reg + - power-domains + - clocks + +allOf: + - if: + properties: + compatible: + contains: + const: mediatek,mt8195-mdp3-split + + then: + required: + - mediatek,gce-client-reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/power/mt8173-power.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + split0: split@14018000 { + compatible = "mediatek,mt8173-disp-split"; + reg = <0 0x14018000 0 0x1000>; + power-domains = <&spm MT8173_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_SPLIT0>; + }; + }; diff --git a/dts/Bindings/display/mediatek/mediatek,ufoe.yaml b/dts/Bindings/display/mediatek/mediatek,ufoe.yaml new file mode 100644 index 0000000000..39e3e2d4a0 --- /dev/null +++ b/dts/Bindings/display/mediatek/mediatek,ufoe.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,ufoe.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek display UFOe + +maintainers: + - Chun-Kuang Hu <chunkuang.hu@kernel.org> + - Philipp Zabel <p.zabel@pengutronix.de> + +description: | + Mediatek display UFOe stands for Unified Frame Optimization engine. + UFOe can cut the data rate for DSI port which may lead to reduce power + consumption. + UFOe device node must be siblings to the central MMSYS_CONFIG node. + For a description of the MMSYS_CONFIG binding, see + Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml + for details. + +properties: + compatible: + oneOf: + - enum: + - mediatek,mt8173-disp-ufoe + - items: + - const: mediatek,mt6795-disp-ufoe + - const: mediatek,mt8173-disp-ufoe + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + description: A phandle and PM domain specifier as defined by bindings of + the power controller specified by phandle. See + Documentation/devicetree/bindings/power/power-domain.yaml for details. + + clocks: + items: + - description: UFOe Clock + +required: + - compatible + - reg + - interrupts + - power-domains + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/power/mt8173-power.h> + soc { + #address-cells = <2>; + #size-cells = <2>; + + ufoe@1401a000 { + compatible = "mediatek,mt8173-disp-ufoe"; + reg = <0 0x1401a000 0 0x1000>; + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_UFOE>; + }; + }; diff --git a/dts/Bindings/display/mediatek/mediatek,wdma.yaml b/dts/Bindings/display/mediatek/mediatek,wdma.yaml new file mode 100644 index 0000000000..a3a2b71a45 --- /dev/null +++ b/dts/Bindings/display/mediatek/mediatek,wdma.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,wdma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek Write Direct Memory Access + +maintainers: + - Chun-Kuang Hu <chunkuang.hu@kernel.org> + - Philipp Zabel <p.zabel@pengutronix.de> + +description: | + Mediatek Write Direct Memory Access(WDMA) component used to write + the data into DMA. + WDMA device node must be siblings to the central MMSYS_CONFIG node. + For a description of the MMSYS_CONFIG binding, see + Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml + for details. + +properties: + compatible: + oneOf: + - enum: + - mediatek,mt8173-disp-wdma + - items: + - const: mediatek,mt6795-disp-wdma + - const: mediatek,mt8173-disp-wdma + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + description: A phandle and PM domain specifier as defined by bindings of + the power controller specified by phandle. See + Documentation/devicetree/bindings/power/power-domain.yaml for details. + + clocks: + items: + - description: WDMA Clock + + iommus: + description: + This property should point to the respective IOMMU block with master port as argument, + see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details. + + mediatek,gce-client-reg: + description: The register of client driver can be configured by gce with + 4 arguments defined in this property, such as phandle of gce, subsys id, + register offset and size. Each GCE subsys id is mapping to a client + defined in the header include/dt-bindings/gce/<chip>-gce.h. + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - power-domains + - clocks + - iommus + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/power/mt8173-power.h> + #include <dt-bindings/gce/mt8173-gce.h> + #include <dt-bindings/memory/mt8173-larb-port.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + wdma0: wdma@14011000 { + compatible = "mediatek,mt8173-disp-wdma"; + reg = <0 0x14011000 0 0x1000>; + interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_DISP_WDMA0>; + iommus = <&iommu M4U_PORT_DISP_WDMA0>; + mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x1000 0x1000>; + }; + }; diff --git a/dts/Bindings/display/msm/dp-controller.yaml b/dts/Bindings/display/msm/dp-controller.yaml new file mode 100644 index 0000000000..ae53cbfb21 --- /dev/null +++ b/dts/Bindings/display/msm/dp-controller.yaml @@ -0,0 +1,235 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/dp-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MSM Display Port Controller + +maintainers: + - Kuogee Hsieh <quic_khsieh@quicinc.com> + +description: | + Device tree bindings for DisplayPort host controller for MSM targets + that are compatible with VESA DisplayPort interface specification. + +properties: + compatible: + oneOf: + - enum: + - qcom,sc7180-dp + - qcom,sc7280-dp + - qcom,sc7280-edp + - qcom,sc8180x-dp + - qcom,sc8180x-edp + - qcom,sc8280xp-dp + - qcom,sc8280xp-edp + - qcom,sdm845-dp + - qcom,sm8350-dp + - qcom,sm8650-dp + - items: + - enum: + - qcom,sm8150-dp + - qcom,sm8250-dp + - qcom,sm8450-dp + - qcom,sm8550-dp + - const: qcom,sm8350-dp + + reg: + minItems: 4 + items: + - description: ahb register block + - description: aux register block + - description: link register block + - description: p0 register block + - description: p1 register block + + interrupts: + maxItems: 1 + + clocks: + items: + - description: AHB clock to enable register access + - description: Display Port AUX clock + - description: Display Port Link clock + - description: Link interface clock between DP and PHY + - description: Display Port Pixel clock + + clock-names: + items: + - const: core_iface + - const: core_aux + - const: ctrl_link + - const: ctrl_link_iface + - const: stream_pixel + + assigned-clocks: + items: + - description: link clock source + - description: pixel clock source + + assigned-clock-parents: + items: + - description: phy 0 parent + - description: phy 1 parent + + phys: + maxItems: 1 + + phy-names: + items: + - const: dp + + operating-points-v2: true + + opp-table: + type: object + + power-domains: + maxItems: 1 + + aux-bus: + $ref: /schemas/display/dp-aux-bus.yaml# + + data-lanes: + $ref: /schemas/types.yaml#/definitions/uint32-array + deprecated: true + minItems: 1 + maxItems: 4 + items: + maximum: 3 + + "#sound-dai-cells": + const: 0 + + vdda-0p9-supply: + deprecated: true + vdda-1p2-supply: + deprecated: true + + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Input endpoint of the controller + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: Output endpoint of the controller + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + properties: + data-lanes: + minItems: 1 + maxItems: 4 + items: + enum: [ 0, 1, 2, 3 ] + + link-frequencies: + minItems: 1 + maxItems: 4 + items: + enum: [ 1620000000, 2700000000, 5400000000, 8100000000 ] + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - phys + - phy-names + - power-domains + - ports + +allOf: + # AUX BUS does not exist on DP controllers + # Audio output also is present only on DP output + # p1 regions is present on DP, but not on eDP + - if: + properties: + compatible: + contains: + enum: + - qcom,sc7280-edp + - qcom,sc8180x-edp + - qcom,sc8280xp-edp + then: + properties: + "#sound-dai-cells": false + else: + properties: + aux-bus: false + reg: + minItems: 5 + required: + - "#sound-dai-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,dispcc-sc7180.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + displayport-controller@ae90000 { + compatible = "qcom,sc7180-dp"; + reg = <0xae90000 0x200>, + <0xae90200 0x200>, + <0xae90400 0xc00>, + <0xae91000 0x400>, + <0xae91400 0x400>; + interrupt-parent = <&mdss>; + interrupts = <12>; + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DP_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>; + clock-names = "core_iface", "core_aux", + "ctrl_link", + "ctrl_link_iface", "stream_pixel"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>; + + assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>; + + phys = <&dp_phy>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + power-domains = <&rpmhpd SC7180_CX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&typec>; + data-lanes = <0 1>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; + }; + }; + }; + }; +... diff --git a/dts/Bindings/display/msm/dpu-common.yaml b/dts/Bindings/display/msm/dpu-common.yaml new file mode 100644 index 0000000000..3f953aa5e6 --- /dev/null +++ b/dts/Bindings/display/msm/dpu-common.yaml @@ -0,0 +1,56 @@ +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/dpu-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DPU common properties + +maintainers: + - Krishna Manikandan <quic_mkrishn@quicinc.com> + - Dmitry Baryshkov <dmitry.baryshkov@linaro.org> + - Rob Clark <robdclark@gmail.com> + +description: | + Common properties for QCom DPU display controller. + +# Do not select this by default, otherwise it is also selected for all +# display-controller@ nodes +select: + false + +properties: + $nodename: + pattern: '^display-controller@[0-9a-f]+$' + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + + operating-points-v2: true + opp-table: + type: object + + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: | + Contains the list of output ports from DPU device. These ports + connect to interfaces that are external to the DPU hardware, + such as DSI, DP etc. + + patternProperties: + "^port@[0-9a-f]+$": + $ref: /schemas/graph.yaml#/properties/port + + # at least one port is required + required: + - port@0 + +required: + - interrupts + - power-domains + - operating-points-v2 + - ports + +additionalProperties: true diff --git a/dts/Bindings/display/msm/dpu.txt b/dts/Bindings/display/msm/dpu.txt deleted file mode 100644 index 551ae26f60..0000000000 --- a/dts/Bindings/display/msm/dpu.txt +++ /dev/null @@ -1,141 +0,0 @@ -Qualcomm Technologies, Inc. DPU KMS - -Description: - -Device tree bindings for MSM Mobile Display Subsytem(MDSS) that encapsulates -sub-blocks like DPU display controller, DSI and DP interfaces etc. -The DPU display controller is found in SDM845 SoC. - -MDSS: -Required properties: -- compatible: "qcom,sdm845-mdss", "qcom,sc7180-mdss" -- reg: physical base address and length of contoller's registers. -- reg-names: register region names. The following region is required: - * "mdss" -- power-domains: a power domain consumer specifier according to - Documentation/devicetree/bindings/power/power_domain.txt -- clocks: list of clock specifiers for clocks needed by the device. -- clock-names: device clock names, must be in same order as clocks property. - The following clocks are required: - * "iface" - * "bus" - * "core" -- interrupts: interrupt signal from MDSS. -- interrupt-controller: identifies the node as an interrupt controller. -- #interrupt-cells: specifies the number of cells needed to encode an interrupt - source, should be 1. -- iommus: phandle of iommu device node. -- #address-cells: number of address cells for the MDSS children. Should be 1. -- #size-cells: Should be 1. -- ranges: parent bus address space is the same as the child bus address space. -- interconnects : interconnect path specifier for MDSS according to - Documentation/devicetree/bindings/interconnect/interconnect.txt. Should be - 2 paths corresponding to 2 AXI ports. -- interconnect-names : MDSS will have 2 port names to differentiate between the - 2 interconnect paths defined with interconnect specifier. - -Optional properties: -- assigned-clocks: list of clock specifiers for clocks needing rate assignment -- assigned-clock-rates: list of clock frequencies sorted in the same order as - the assigned-clocks property. - -MDP: -Required properties: -- compatible: "qcom,sdm845-dpu", "qcom,sc7180-dpu" -- reg: physical base address and length of controller's registers. -- reg-names : register region names. The following region is required: - * "mdp" - * "vbif" -- clocks: list of clock specifiers for clocks needed by the device. -- clock-names: device clock names, must be in same order as clocks property. - The following clocks are required. - * "bus" - * "iface" - * "core" - * "vsync" -- interrupts: interrupt line from DPU to MDSS. -- ports: contains the list of output ports from DPU device. These ports connect - to interfaces that are external to the DPU hardware, such as DSI, DP etc. - - Each output port contains an endpoint that describes how it is connected to an - external interface. These are described by the standard properties documented - here: - Documentation/devicetree/bindings/graph.txt - Documentation/devicetree/bindings/media/video-interfaces.txt - - Port 0 -> DPU_INTF1 (DSI1) - Port 1 -> DPU_INTF2 (DSI2) - -Optional properties: -- assigned-clocks: list of clock specifiers for clocks needing rate assignment -- assigned-clock-rates: list of clock frequencies sorted in the same order as - the assigned-clocks property. - -Example: - - mdss: mdss@ae00000 { - compatible = "qcom,sdm845-mdss"; - reg = <0xae00000 0x1000>; - reg-names = "mdss"; - - power-domains = <&clock_dispcc 0>; - - clocks = <&gcc GCC_DISP_AHB_CLK>, <&gcc GCC_DISP_AXI_CLK>, - <&clock_dispcc DISP_CC_MDSS_MDP_CLK>; - clock-names = "iface", "bus", "core"; - - assigned-clocks = <&clock_dispcc DISP_CC_MDSS_MDP_CLK>; - assigned-clock-rates = <300000000>; - - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <1>; - - interconnects = <&rsc_hlos MASTER_MDP0 &rsc_hlos SLAVE_EBI1>, - <&rsc_hlos MASTER_MDP1 &rsc_hlos SLAVE_EBI1>; - - interconnect-names = "mdp0-mem", "mdp1-mem"; - - iommus = <&apps_iommu 0>; - - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0xae00000 0xb2008>; - - mdss_mdp: mdp@ae01000 { - compatible = "qcom,sdm845-dpu"; - reg = <0 0x1000 0x8f000>, <0 0xb0000 0x2008>; - reg-names = "mdp", "vbif"; - - clocks = <&clock_dispcc DISP_CC_MDSS_AHB_CLK>, - <&clock_dispcc DISP_CC_MDSS_AXI_CLK>, - <&clock_dispcc DISP_CC_MDSS_MDP_CLK>, - <&clock_dispcc DISP_CC_MDSS_VSYNC_CLK>; - clock-names = "iface", "bus", "core", "vsync"; - - assigned-clocks = <&clock_dispcc DISP_CC_MDSS_MDP_CLK>, - <&clock_dispcc DISP_CC_MDSS_VSYNC_CLK>; - assigned-clock-rates = <0 0 300000000 19200000>; - - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - dpu_intf1_out: endpoint { - remote-endpoint = <&dsi0_in>; - }; - }; - - port@1 { - reg = <1>; - dpu_intf2_out: endpoint { - remote-endpoint = <&dsi1_in>; - }; - }; - }; - }; - }; diff --git a/dts/Bindings/display/msm/dsi-controller-main.yaml b/dts/Bindings/display/msm/dsi-controller-main.yaml new file mode 100644 index 0000000000..4219936eda --- /dev/null +++ b/dts/Bindings/display/msm/dsi-controller-main.yaml @@ -0,0 +1,457 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/dsi-controller-main.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DSI controller + +maintainers: + - Krishna Manikandan <quic_mkrishn@quicinc.com> + +properties: + compatible: + oneOf: + - items: + - enum: + - qcom,apq8064-dsi-ctrl + - qcom,msm8226-dsi-ctrl + - qcom,msm8916-dsi-ctrl + - qcom,msm8953-dsi-ctrl + - qcom,msm8974-dsi-ctrl + - qcom,msm8996-dsi-ctrl + - qcom,msm8998-dsi-ctrl + - qcom,qcm2290-dsi-ctrl + - qcom,sc7180-dsi-ctrl + - qcom,sc7280-dsi-ctrl + - qcom,sdm660-dsi-ctrl + - qcom,sdm670-dsi-ctrl + - qcom,sdm845-dsi-ctrl + - qcom,sm6115-dsi-ctrl + - qcom,sm6125-dsi-ctrl + - qcom,sm6350-dsi-ctrl + - qcom,sm6375-dsi-ctrl + - qcom,sm8150-dsi-ctrl + - qcom,sm8250-dsi-ctrl + - qcom,sm8350-dsi-ctrl + - qcom,sm8450-dsi-ctrl + - qcom,sm8550-dsi-ctrl + - qcom,sm8650-dsi-ctrl + - const: qcom,mdss-dsi-ctrl + - enum: + - qcom,dsi-ctrl-6g-qcm2290 + - qcom,mdss-dsi-ctrl # This should always come with an SoC-specific compatible + deprecated: true + + reg: + maxItems: 1 + + reg-names: + const: dsi_ctrl + + interrupts: + maxItems: 1 + + clocks: + description: | + Several clocks are used, depending on the variant. Typical ones are:: + - bus:: Display AHB clock. + - byte:: Display byte clock. + - byte_intf:: Display byte interface clock. + - core:: Display core clock. + - core_mss:: Core MultiMedia SubSystem clock. + - iface:: Display AXI clock. + - mdp_core:: MDP Core clock. + - mnoc:: MNOC clock + - pixel:: Display pixel clock. + minItems: 3 + maxItems: 9 + + clock-names: + minItems: 3 + maxItems: 9 + + phys: + maxItems: 1 + + phy-names: + deprecated: true + const: dsi + + syscon-sfpb: + description: A phandle to mmss_sfpb syscon node (only for DSIv2). + $ref: /schemas/types.yaml#/definitions/phandle + + qcom,dual-dsi-mode: + type: boolean + description: | + Indicates if the DSI controller is driving a panel which needs + 2 DSI links. + + qcom,master-dsi: + type: boolean + description: | + Indicates if the DSI controller is the master DSI controller when + qcom,dual-dsi-mode enabled. + + qcom,sync-dual-dsi: + type: boolean + description: | + Indicates if the DSI controller needs to sync the other DSI controller + with MIPI DCS commands when qcom,dual-dsi-mode enabled. + + assigned-clocks: + minItems: 2 + maxItems: 4 + description: | + Parents of "byte" and "pixel" for the given platform. + For DSIv2 platforms this should contain "byte", "esc", "src" and + "pixel_src" clocks. + + assigned-clock-parents: + minItems: 2 + maxItems: 4 + description: | + The Byte clock and Pixel clock PLL outputs provided by a DSI PHY block. + + power-domains: + maxItems: 1 + + operating-points-v2: true + + opp-table: + type: object + + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: | + Contains DSI controller input and output ports as children, each + containing one endpoint subnode. + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: | + Input endpoints of the controller. + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + properties: + data-lanes: + maxItems: 4 + minItems: 1 + items: + enum: [ 0, 1, 2, 3 ] + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: | + Output endpoints of the controller. + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + properties: + data-lanes: + maxItems: 4 + minItems: 1 + items: + enum: [ 0, 1, 2, 3 ] + + required: + - port@0 + - port@1 + + avdd-supply: + description: + Phandle to vdd regulator device node + + refgen-supply: + description: + Phandle to REFGEN regulator device node + + vcca-supply: + description: + Phandle to vdd regulator device node + + vdd-supply: + description: + VDD regulator + + vddio-supply: + description: + VDD-IO regulator + + vdda-supply: + description: + VDDA regulator + +required: + - compatible + - reg + - reg-names + - interrupts + - clocks + - clock-names + - phys + - assigned-clocks + - assigned-clock-parents + - ports + +allOf: + - $ref: ../dsi-controller.yaml# + - if: + properties: + compatible: + contains: + enum: + - qcom,apq8064-dsi-ctrl + then: + properties: + clocks: + maxItems: 7 + clock-names: + items: + - const: iface + - const: bus + - const: core_mmss + - const: src + - const: byte + - const: pixel + - const: core + + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8916-dsi-ctrl + then: + properties: + clocks: + maxItems: 6 + clock-names: + items: + - const: mdp_core + - const: iface + - const: bus + - const: byte + - const: pixel + - const: core + + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8953-dsi-ctrl + then: + properties: + clocks: + maxItems: 6 + clock-names: + items: + - const: mdp_core + - const: iface + - const: bus + - const: byte + - const: pixel + - const: core + + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8226-dsi-ctrl + - qcom,msm8974-dsi-ctrl + then: + properties: + clocks: + maxItems: 7 + clock-names: + items: + - const: mdp_core + - const: iface + - const: bus + - const: byte + - const: pixel + - const: core + - const: core_mmss + + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8996-dsi-ctrl + then: + properties: + clocks: + maxItems: 7 + clock-names: + items: + - const: mdp_core + - const: byte + - const: iface + - const: bus + - const: core_mmss + - const: pixel + - const: core + + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8998-dsi-ctrl + - qcom,sm6125-dsi-ctrl + - qcom,sm6350-dsi-ctrl + then: + properties: + clocks: + maxItems: 6 + clock-names: + items: + - const: byte + - const: byte_intf + - const: pixel + - const: core + - const: iface + - const: bus + + - if: + properties: + compatible: + contains: + enum: + - qcom,sc7180-dsi-ctrl + - qcom,sc7280-dsi-ctrl + - qcom,sm8150-dsi-ctrl + - qcom,sm8250-dsi-ctrl + - qcom,sm8350-dsi-ctrl + - qcom,sm8450-dsi-ctrl + - qcom,sm8550-dsi-ctrl + - qcom,sm8650-dsi-ctrl + then: + properties: + clocks: + maxItems: 6 + clock-names: + items: + - const: byte + - const: byte_intf + - const: pixel + - const: core + - const: iface + - const: bus + + - if: + properties: + compatible: + contains: + enum: + - qcom,sdm660-dsi-ctrl + then: + properties: + clocks: + maxItems: 9 + clock-names: + items: + - const: mdp_core + - const: byte + - const: byte_intf + - const: mnoc + - const: iface + - const: bus + - const: core_mmss + - const: pixel + - const: core + + - if: + properties: + compatible: + contains: + enum: + - qcom,sdm845-dsi-ctrl + - qcom,sm6115-dsi-ctrl + - qcom,sm6375-dsi-ctrl + then: + properties: + clocks: + maxItems: 6 + clock-names: + items: + - const: byte + - const: byte_intf + - const: pixel + - const: core + - const: iface + - const: bus + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,dispcc-sdm845.h> + #include <dt-bindings/clock/qcom,gcc-sdm845.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + dsi@ae94000 { + compatible = "qcom,sc7180-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0ae94000 0x400>; + reg-names = "dsi_ctrl"; + + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + phys = <&dsi0_phy>; + phy-names = "dsi"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi_phy 0>, <&dsi_phy 1>; + + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&dsi_opp_table>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + remote-endpoint = <&sn65dsi86_in>; + data-lanes = <0 1 2 3>; + }; + }; + }; + }; +... diff --git a/dts/Bindings/display/msm/dsi-phy-10nm.yaml b/dts/Bindings/display/msm/dsi-phy-10nm.yaml new file mode 100644 index 0000000000..69d13867b7 --- /dev/null +++ b/dts/Bindings/display/msm/dsi-phy-10nm.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/dsi-phy-10nm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DSI 10nm PHY + +maintainers: + - Krishna Manikandan <quic_mkrishn@quicinc.com> + +allOf: + - $ref: dsi-phy-common.yaml# + +properties: + compatible: + enum: + - qcom,dsi-phy-10nm + - qcom,dsi-phy-10nm-8998 + + reg: + items: + - description: dsi phy register set + - description: dsi phy lane register set + - description: dsi pll register set + + reg-names: + items: + - const: dsi_phy + - const: dsi_phy_lane + - const: dsi_pll + + vdds-supply: + description: | + Connected to DSI0_MIPI_DSI_PLL_VDDA0P9 pin for sc7180 target and + connected to VDDA_MIPI_DSI_0_PLL_0P9 pin for sdm845 target + + qcom,phy-rescode-offset-top: + $ref: /schemas/types.yaml#/definitions/int8-array + maxItems: 5 + description: + Integer array of offset for pull-up legs rescode for all five lanes. + To offset the drive strength from the calibrated value in an increasing + manner, -32 is the weakest and +31 is the strongest. + items: + minimum: -32 + maximum: 31 + + qcom,phy-rescode-offset-bot: + $ref: /schemas/types.yaml#/definitions/int8-array + maxItems: 5 + description: + Integer array of offset for pull-down legs rescode for all five lanes. + To offset the drive strength from the calibrated value in a decreasing + manner, -32 is the weakest and +31 is the strongest. + items: + minimum: -32 + maximum: 31 + + qcom,phy-drive-ldo-level: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The PHY LDO has an amplitude tuning feature to adjust the LDO output + for the HSTX drive. Use supported levels (mV) to offset the drive level + from the default value. + enum: [ 375, 400, 425, 450, 475, 500 ] + +required: + - compatible + - reg + - reg-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sdm845.h> + #include <dt-bindings/clock/qcom,rpmh.h> + + dsi-phy@ae94400 { + compatible = "qcom,dsi-phy-10nm"; + reg = <0x0ae94400 0x200>, + <0x0ae94600 0x280>, + <0x0ae94a00 0x1e0>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + vdds-supply = <&vdda_mipi_dsi0_pll>; + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + qcom,phy-rescode-offset-top = /bits/ 8 <0 0 0 0 0>; + qcom,phy-rescode-offset-bot = /bits/ 8 <0 0 0 0 0>; + qcom,phy-drive-ldo-level = <400>; + }; +... diff --git a/dts/Bindings/display/msm/dsi-phy-14nm.yaml b/dts/Bindings/display/msm/dsi-phy-14nm.yaml new file mode 100644 index 0000000000..52bbe132e6 --- /dev/null +++ b/dts/Bindings/display/msm/dsi-phy-14nm.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/dsi-phy-14nm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DSI 14nm PHY + +maintainers: + - Krishna Manikandan <quic_mkrishn@quicinc.com> + +allOf: + - $ref: dsi-phy-common.yaml# + +properties: + compatible: + enum: + - qcom,dsi-phy-14nm + - qcom,dsi-phy-14nm-2290 + - qcom,dsi-phy-14nm-660 + - qcom,dsi-phy-14nm-8953 + - qcom,sm6125-dsi-phy-14nm + + reg: + items: + - description: dsi phy register set + - description: dsi phy lane register set + - description: dsi pll register set + + reg-names: + items: + - const: dsi_phy + - const: dsi_phy_lane + - const: dsi_pll + + vcca-supply: + description: Phandle to vcca regulator device node. + + power-domains: + description: + A phandle and PM domain specifier for an optional power domain. + maxItems: 1 + + required-opps: + description: + A phandle to an OPP node describing the power domain's performance point. + maxItems: 1 + +required: + - compatible + - reg + - reg-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sdm845.h> + #include <dt-bindings/clock/qcom,rpmh.h> + + dsi-phy@ae94400 { + compatible = "qcom,dsi-phy-14nm"; + reg = <0x0ae94400 0x200>, + <0x0ae94600 0x280>, + <0x0ae94a00 0x1e0>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + vcca-supply = <&vcca_reg>; + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + }; +... diff --git a/dts/Bindings/display/msm/dsi-phy-20nm.yaml b/dts/Bindings/display/msm/dsi-phy-20nm.yaml new file mode 100644 index 0000000000..7e6687cb00 --- /dev/null +++ b/dts/Bindings/display/msm/dsi-phy-20nm.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/dsi-phy-20nm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DSI 20nm PHY + +maintainers: + - Krishna Manikandan <quic_mkrishn@quicinc.com> + +allOf: + - $ref: dsi-phy-common.yaml# + +properties: + compatible: + const: qcom,dsi-phy-20nm + + reg: + items: + - description: dsi pll register set + - description: dsi phy register set + - description: dsi phy regulator register set + + reg-names: + items: + - const: dsi_pll + - const: dsi_phy + - const: dsi_phy_regulator + + vcca-supply: + description: Phandle to vcca regulator device node. + + vddio-supply: + description: Phandle to vdd-io regulator device node. + +required: + - compatible + - reg + - reg-names + - vddio-supply + - vcca-supply + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sdm845.h> + #include <dt-bindings/clock/qcom,rpmh.h> + + dsi-phy@fd922a00 { + compatible = "qcom,dsi-phy-20nm"; + reg = <0xfd922a00 0xd4>, + <0xfd922b00 0x2b0>, + <0xfd922d80 0x7b>; + reg-names = "dsi_pll", + "dsi_phy", + "dsi_phy_regulator"; + + #clock-cells = <1>; + #phy-cells = <0>; + + vcca-supply = <&vcca_reg>; + vddio-supply = <&vddio_reg>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + }; +... diff --git a/dts/Bindings/display/msm/dsi-phy-28nm.yaml b/dts/Bindings/display/msm/dsi-phy-28nm.yaml new file mode 100644 index 0000000000..288d8babb7 --- /dev/null +++ b/dts/Bindings/display/msm/dsi-phy-28nm.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/dsi-phy-28nm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DSI 28nm PHY + +maintainers: + - Krishna Manikandan <quic_mkrishn@quicinc.com> + +allOf: + - $ref: dsi-phy-common.yaml# + +properties: + compatible: + enum: + - qcom,dsi-phy-28nm-8226 + - qcom,dsi-phy-28nm-8960 + - qcom,dsi-phy-28nm-hpm + - qcom,dsi-phy-28nm-hpm-fam-b + - qcom,dsi-phy-28nm-lp + + reg: + items: + - description: dsi pll register set + - description: dsi phy register set + - description: dsi phy regulator register set + + reg-names: + items: + - const: dsi_pll + - const: dsi_phy + - const: dsi_phy_regulator + + vddio-supply: + description: Phandle to vdd-io regulator device node. + + qcom,dsi-phy-regulator-ldo-mode: + type: boolean + description: Indicates if the LDO mode PHY regulator is wanted. + +required: + - compatible + - reg + - reg-names + - vddio-supply + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sdm845.h> + #include <dt-bindings/clock/qcom,rpmh.h> + + dsi-phy@fd922a00 { + compatible = "qcom,dsi-phy-28nm-lp"; + reg = <0xfd922a00 0xd4>, + <0xfd922b00 0x2b0>, + <0xfd922d80 0x7b>; + reg-names = "dsi_pll", + "dsi_phy", + "dsi_phy_regulator"; + + #clock-cells = <1>; + #phy-cells = <0>; + + vddio-supply = <&vddio_reg>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + }; +... diff --git a/dts/Bindings/display/msm/dsi-phy-7nm.yaml b/dts/Bindings/display/msm/dsi-phy-7nm.yaml new file mode 100644 index 0000000000..7e764eac3e --- /dev/null +++ b/dts/Bindings/display/msm/dsi-phy-7nm.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/dsi-phy-7nm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DSI 7nm PHY + +maintainers: + - Jonathan Marek <jonathan@marek.ca> + +allOf: + - $ref: dsi-phy-common.yaml# + +properties: + compatible: + enum: + - qcom,dsi-phy-7nm + - qcom,dsi-phy-7nm-8150 + - qcom,sc7280-dsi-phy-7nm + - qcom,sm6375-dsi-phy-7nm + - qcom,sm8350-dsi-phy-5nm + - qcom,sm8450-dsi-phy-5nm + - qcom,sm8550-dsi-phy-4nm + - qcom,sm8650-dsi-phy-4nm + + reg: + items: + - description: dsi phy register set + - description: dsi phy lane register set + - description: dsi pll register set + + reg-names: + items: + - const: dsi_phy + - const: dsi_phy_lane + - const: dsi_pll + + vdds-supply: + description: | + Connected to VDD_A_DSI_PLL_0P9 pin (or VDDA_DSI{0,1}_PLL_0P9 for sm8150) + + phy-type: + description: D-PHY (default) or C-PHY mode + enum: [ 10, 11 ] + default: 10 + +required: + - compatible + - reg + - reg-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sm8250.h> + #include <dt-bindings/clock/qcom,rpmh.h> + + dsi-phy@ae94400 { + compatible = "qcom,dsi-phy-7nm"; + reg = <0x0ae94400 0x200>, + <0x0ae94600 0x280>, + <0x0ae94900 0x260>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + vdds-supply = <&vreg_l5a_0p88>; + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + }; diff --git a/dts/Bindings/display/msm/dsi-phy-common.yaml b/dts/Bindings/display/msm/dsi-phy-common.yaml new file mode 100644 index 0000000000..6b57ce41c9 --- /dev/null +++ b/dts/Bindings/display/msm/dsi-phy-common.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/dsi-phy-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DSI PHY Common Properties + +maintainers: + - Krishna Manikandan <quic_mkrishn@quicinc.com> + +description: + Common properties for Qualcomm Display DSI PHY. + +properties: + "#clock-cells": + const: 1 + + "#phy-cells": + const: 0 + + clocks: + items: + - description: Display AHB clock + - description: Board XO source + + clock-names: + items: + - const: iface + - const: ref + +required: + - clocks + - clock-names + - "#clock-cells" + - "#phy-cells" + +additionalProperties: true +... diff --git a/dts/Bindings/display/msm/dsi.txt b/dts/Bindings/display/msm/dsi.txt deleted file mode 100644 index af95586c89..0000000000 --- a/dts/Bindings/display/msm/dsi.txt +++ /dev/null @@ -1,246 +0,0 @@ -Qualcomm Technologies Inc. adreno/snapdragon DSI output - -DSI Controller: -Required properties: -- compatible: - * "qcom,mdss-dsi-ctrl" -- reg: Physical base address and length of the registers of controller -- reg-names: The names of register regions. The following regions are required: - * "dsi_ctrl" -- interrupts: The interrupt signal from the DSI block. -- power-domains: Should be <&mmcc MDSS_GDSC>. -- clocks: Phandles to device clocks. -- clock-names: the following clocks are required: - * "mdp_core" - * "iface" - * "bus" - * "core_mmss" - * "byte" - * "pixel" - * "core" - For DSIv2, we need an additional clock: - * "src" - For DSI6G v2.0 onwards, we need also need the clock: - * "byte_intf" -- assigned-clocks: Parents of "byte" and "pixel" for the given platform. -- assigned-clock-parents: The Byte clock and Pixel clock PLL outputs provided - by a DSI PHY block. See [1] for details on clock bindings. -- vdd-supply: phandle to vdd regulator device node -- vddio-supply: phandle to vdd-io regulator device node -- vdda-supply: phandle to vdda regulator device node -- phys: phandle to DSI PHY device node -- phy-names: the name of the corresponding PHY device -- syscon-sfpb: A phandle to mmss_sfpb syscon node (only for DSIv2) -- ports: Contains 2 DSI controller ports as child nodes. Each port contains - an endpoint subnode as defined in [2] and [3]. - -Optional properties: -- panel@0: Node of panel connected to this DSI controller. - See files in [4] for each supported panel. -- qcom,dual-dsi-mode: Boolean value indicating if the DSI controller is - driving a panel which needs 2 DSI links. -- qcom,master-dsi: Boolean value indicating if the DSI controller is driving - the master link of the 2-DSI panel. -- qcom,sync-dual-dsi: Boolean value indicating if the DSI controller is - driving a 2-DSI panel whose 2 links need receive command simultaneously. -- pinctrl-names: the pin control state names; should contain "default" -- pinctrl-0: the default pinctrl state (active) -- pinctrl-n: the "sleep" pinctrl state -- ports: contains DSI controller input and output ports as children, each - containing one endpoint subnode. - - DSI Endpoint properties: - - remote-endpoint: For port@0, set to phandle of the connected panel/bridge's - input endpoint. For port@1, set to the MDP interface output. See [2] for - device graph info. - - - data-lanes: this describes how the physical DSI data lanes are mapped - to the logical lanes on the given platform. The value contained in - index n describes what physical lane is mapped to the logical lane n - (DATAn, where n lies between 0 and 3). The clock lane position is fixed - and can't be changed. Hence, they aren't a part of the DT bindings. See - [3] for more info on the data-lanes property. - - For example: - - data-lanes = <3 0 1 2>; - - The above mapping describes that the logical data lane DATA0 is mapped to - the physical data lane DATA3, logical DATA1 to physical DATA0, logic DATA2 - to phys DATA1 and logic DATA3 to phys DATA2. - - There are only a limited number of physical to logical mappings possible: - <0 1 2 3> - <1 2 3 0> - <2 3 0 1> - <3 0 1 2> - <0 3 2 1> - <1 0 3 2> - <2 1 0 3> - <3 2 1 0> - -DSI PHY: -Required properties: -- compatible: Could be the following - * "qcom,dsi-phy-28nm-hpm" - * "qcom,dsi-phy-28nm-lp" - * "qcom,dsi-phy-20nm" - * "qcom,dsi-phy-28nm-8960" - * "qcom,dsi-phy-14nm" - * "qcom,dsi-phy-10nm" - * "qcom,dsi-phy-10nm-8998" -- reg: Physical base address and length of the registers of PLL, PHY. Some - revisions require the PHY regulator base address, whereas others require the - PHY lane base address. See below for each PHY revision. -- reg-names: The names of register regions. The following regions are required: - For DSI 28nm HPM/LP/8960 PHYs and 20nm PHY: - * "dsi_pll" - * "dsi_phy" - * "dsi_phy_regulator" - For DSI 14nm and 10nm PHYs: - * "dsi_pll" - * "dsi_phy" - * "dsi_phy_lane" -- clock-cells: Must be 1. The DSI PHY block acts as a clock provider, creating - 2 clocks: A byte clock (index 0), and a pixel clock (index 1). -- power-domains: Should be <&mmcc MDSS_GDSC>. -- clocks: Phandles to device clocks. See [1] for details on clock bindings. -- clock-names: the following clocks are required: - * "iface" - * "ref" (only required for new DTS files/entries) - For 28nm HPM/LP, 28nm 8960 PHYs: -- vddio-supply: phandle to vdd-io regulator device node - For 20nm PHY: -- vddio-supply: phandle to vdd-io regulator device node -- vcca-supply: phandle to vcca regulator device node - For 14nm PHY: -- vcca-supply: phandle to vcca regulator device node - For 10nm PHY: -- vdds-supply: phandle to vdds regulator device node - -Optional properties: -- qcom,dsi-phy-regulator-ldo-mode: Boolean value indicating if the LDO mode PHY - regulator is wanted. -- qcom,mdss-mdp-transfer-time-us: Specifies the dsi transfer time for command mode - panels in microseconds. Driver uses this number to adjust - the clock rate according to the expected transfer time. - Increasing this value would slow down the mdp processing - and can result in slower performance. - Decreasing this value can speed up the mdp processing, - but this can also impact power consumption. - As a rule this time should not be higher than the time - that would be expected with the processing at the - dsi link rate since anyways this would be the maximum - transfer time that could be achieved. - If ping pong split is enabled, this time should not be higher - than two times the dsi link rate time. - If the property is not specified, then the default value is 14000 us. - -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt -[2] Documentation/devicetree/bindings/graph.txt -[3] Documentation/devicetree/bindings/media/video-interfaces.txt -[4] Documentation/devicetree/bindings/display/panel/ - -Example: - dsi0: dsi@fd922800 { - compatible = "qcom,mdss-dsi-ctrl"; - qcom,dsi-host-index = <0>; - interrupt-parent = <&mdp>; - interrupts = <4 0>; - reg-names = "dsi_ctrl"; - reg = <0xfd922800 0x200>; - power-domains = <&mmcc MDSS_GDSC>; - clock-names = - "bus", - "byte", - "core", - "core_mmss", - "iface", - "mdp_core", - "pixel"; - clocks = - <&mmcc MDSS_AXI_CLK>, - <&mmcc MDSS_BYTE0_CLK>, - <&mmcc MDSS_ESC0_CLK>, - <&mmcc MMSS_MISC_AHB_CLK>, - <&mmcc MDSS_AHB_CLK>, - <&mmcc MDSS_MDP_CLK>, - <&mmcc MDSS_PCLK0_CLK>; - - assigned-clocks = - <&mmcc BYTE0_CLK_SRC>, - <&mmcc PCLK0_CLK_SRC>; - assigned-clock-parents = - <&dsi_phy0 0>, - <&dsi_phy0 1>; - - vdda-supply = <&pma8084_l2>; - vdd-supply = <&pma8084_l22>; - vddio-supply = <&pma8084_l12>; - - phys = <&dsi_phy0>; - phy-names ="dsi-phy"; - - qcom,dual-dsi-mode; - qcom,master-dsi; - qcom,sync-dual-dsi; - - qcom,mdss-mdp-transfer-time-us = <12000>; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&dsi_active>; - pinctrl-1 = <&dsi_suspend>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - dsi0_in: endpoint { - remote-endpoint = <&mdp_intf1_out>; - }; - }; - - port@1 { - reg = <1>; - dsi0_out: endpoint { - remote-endpoint = <&panel_in>; - data-lanes = <0 1 2 3>; - }; - }; - }; - - panel: panel@0 { - compatible = "sharp,lq101r1sx01"; - reg = <0>; - link2 = <&secondary>; - - power-supply = <...>; - backlight = <...>; - - port { - panel_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - }; - }; - - dsi_phy0: dsi-phy@fd922a00 { - compatible = "qcom,dsi-phy-28nm-hpm"; - qcom,dsi-phy-index = <0>; - reg-names = - "dsi_pll", - "dsi_phy", - "dsi_phy_regulator"; - reg = <0xfd922a00 0xd4>, - <0xfd922b00 0x2b0>, - <0xfd922d80 0x7b>; - clock-names = "iface"; - clocks = <&mmcc MDSS_AHB_CLK>; - #clock-cells = <1>; - vddio-supply = <&pma8084_l12>; - - qcom,dsi-phy-regulator-ldo-mode; - }; diff --git a/dts/Bindings/display/msm/edp.txt b/dts/Bindings/display/msm/edp.txt deleted file mode 100644 index eff9daff41..0000000000 --- a/dts/Bindings/display/msm/edp.txt +++ /dev/null @@ -1,56 +0,0 @@ -Qualcomm Technologies Inc. adreno/snapdragon eDP output - -Required properties: -- compatible: - * "qcom,mdss-edp" -- reg: Physical base address and length of the registers of controller and PLL -- reg-names: The names of register regions. The following regions are required: - * "edp" - * "pll_base" -- interrupts: The interrupt signal from the eDP block. -- power-domains: Should be <&mmcc MDSS_GDSC>. -- clocks: device clocks - See Documentation/devicetree/bindings/clock/clock-bindings.txt for details. -- clock-names: the following clocks are required: - * "core" - * "iface" - * "mdp_core" - * "pixel" - * "link" -- #clock-cells: The value should be 1. -- vdda-supply: phandle to vdda regulator device node -- lvl-vdd-supply: phandle to regulator device node which is used to supply power - to HPD receiving chip -- panel-en-gpios: GPIO pin to supply power to panel. -- panel-hpd-gpios: GPIO pin used for eDP hpd. - - -Example: - mdss_edp: qcom,mdss_edp@fd923400 { - compatible = "qcom,mdss-edp"; - reg-names = - "edp", - "pll_base"; - reg = <0xfd923400 0x700>, - <0xfd923a00 0xd4>; - interrupt-parent = <&mdss_mdp>; - interrupts = <12 0>; - power-domains = <&mmcc MDSS_GDSC>; - clock-names = - "core", - "pixel", - "iface", - "link", - "mdp_core"; - clocks = - <&mmcc MDSS_EDPAUX_CLK>, - <&mmcc MDSS_EDPPIXEL_CLK>, - <&mmcc MDSS_AHB_CLK>, - <&mmcc MDSS_EDPLINK_CLK>, - <&mmcc MDSS_MDP_CLK>; - #clock-cells = <1>; - vdda-supply = <&pma8084_l12>; - lvl-vdd-supply = <&lvl_vreg>; - panel-en-gpios = <&tlmm 137 0>; - panel-hpd-gpios = <&tlmm 103 0>; - }; diff --git a/dts/Bindings/display/msm/gmu.yaml b/dts/Bindings/display/msm/gmu.yaml index 0b8736a938..4e1c25b429 100644 --- a/dts/Bindings/display/msm/gmu.yaml +++ b/dts/Bindings/display/msm/gmu.yaml @@ -3,10 +3,10 @@ %YAML 1.2 --- -$id: "http://devicetree.org/schemas/display/msm/gmu.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/display/msm/gmu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# -title: Devicetree bindings for the GMU attached to certain Adreno GPUs +title: GMU attached to certain Adreno GPUs maintainers: - Rob Clark <robdclark@gmail.com> @@ -19,42 +19,32 @@ description: | properties: compatible: - items: - - enum: - - qcom,adreno-gmu-630.2 - - const: qcom,adreno-gmu + oneOf: + - items: + - pattern: '^qcom,adreno-gmu-[67][0-9][0-9]\.[0-9]$' + - const: qcom,adreno-gmu + - const: qcom,adreno-gmu-wrapper reg: - items: - - description: Core GMU registers - - description: GMU PDC registers - - description: GMU PDC sequence registers + minItems: 1 + maxItems: 4 reg-names: - items: - - const: gmu - - const: gmu_pdc - - const: gmu_pdc_seq + minItems: 1 + maxItems: 4 clocks: - items: - - description: GMU clock - - description: GPU CX clock - - description: GPU AXI clock - - description: GPU MEMNOC clock + minItems: 4 + maxItems: 7 clock-names: - items: - - const: gmu - - const: cxo - - const: axi - - const: memnoc + minItems: 4 + maxItems: 7 interrupts: items: - - description: GMU HFI interrupt - - description: GMU interrupt - + - description: GMU HFI interrupt + - description: GMU interrupt interrupt-names: items: @@ -62,42 +52,243 @@ properties: - const: gmu power-domains: - items: - - description: CX power domain - - description: GX power domain + items: + - description: CX power domain + - description: GX power domain power-domain-names: - items: - - const: cx - - const: gx + items: + - const: cx + - const: gx iommus: maxItems: 1 + qcom,qmp: + $ref: /schemas/types.yaml#/definitions/phandle + description: Reference to the AOSS side-channel message RAM + operating-points-v2: true + opp-table: + type: object + required: - compatible - reg - reg-names - - clocks - - clock-names - - interrupts - - interrupt-names - power-domains - power-domain-names - - iommus - - operating-points-v2 + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,adreno-gmu-618.0 + - qcom,adreno-gmu-630.2 + then: + properties: + reg: + items: + - description: Core GMU registers + - description: GMU PDC registers + - description: GMU PDC sequence registers + reg-names: + items: + - const: gmu + - const: gmu_pdc + - const: gmu_pdc_seq + clocks: + items: + - description: GMU clock + - description: GPU CX clock + - description: GPU AXI clock + - description: GPU MEMNOC clock + clock-names: + items: + - const: gmu + - const: cxo + - const: axi + - const: memnoc + + - if: + properties: + compatible: + contains: + enum: + - qcom,adreno-gmu-635.0 + - qcom,adreno-gmu-660.1 + then: + properties: + reg: + items: + - description: Core GMU registers + - description: Resource controller registers + - description: GMU PDC registers + reg-names: + items: + - const: gmu + - const: rscc + - const: gmu_pdc + clocks: + items: + - description: GMU clock + - description: GPU CX clock + - description: GPU AXI clock + - description: GPU MEMNOC clock + - description: GPU AHB clock + - description: GPU HUB CX clock + - description: GPU SMMU vote clock + clock-names: + items: + - const: gmu + - const: cxo + - const: axi + - const: memnoc + - const: ahb + - const: hub + - const: smmu_vote + + - if: + properties: + compatible: + contains: + enum: + - qcom,adreno-gmu-640.1 + then: + properties: + reg: + items: + - description: Core GMU registers + - description: GMU PDC registers + - description: GMU PDC sequence registers + reg-names: + items: + - const: gmu + - const: gmu_pdc + - const: gmu_pdc_seq + + - if: + properties: + compatible: + contains: + enum: + - qcom,adreno-gmu-650.2 + then: + properties: + reg: + items: + - description: Core GMU registers + - description: Resource controller registers + - description: GMU PDC registers + - description: GMU PDC sequence registers + reg-names: + items: + - const: gmu + - const: rscc + - const: gmu_pdc + - const: gmu_pdc_seq + + - if: + properties: + compatible: + contains: + enum: + - qcom,adreno-gmu-640.1 + - qcom,adreno-gmu-650.2 + then: + properties: + clocks: + items: + - description: GPU AHB clock + - description: GMU clock + - description: GPU CX clock + - description: GPU AXI clock + - description: GPU MEMNOC clock + clock-names: + items: + - const: ahb + - const: gmu + - const: cxo + - const: axi + - const: memnoc + + - if: + properties: + compatible: + contains: + enum: + - qcom,adreno-gmu-730.1 + - qcom,adreno-gmu-740.1 + then: + properties: + reg: + items: + - description: Core GMU registers + - description: Resource controller registers + - description: GMU PDC registers + reg-names: + items: + - const: gmu + - const: rscc + - const: gmu_pdc + clocks: + items: + - description: GPU AHB clock + - description: GMU clock + - description: GPU CX clock + - description: GPU AXI clock + - description: GPU MEMNOC clock + - description: GMU HUB clock + - description: GPUSS DEMET clock + clock-names: + items: + - const: ahb + - const: gmu + - const: cxo + - const: axi + - const: memnoc + - const: hub + - const: demet + + required: + - qcom,qmp + + - if: + properties: + compatible: + contains: + const: qcom,adreno-gmu-wrapper + then: + properties: + reg: + items: + - description: GMU wrapper register space + reg-names: + items: + - const: gmu + else: + required: + - clocks + - clock-names + - interrupts + - interrupt-names + - iommus + - operating-points-v2 examples: - - | - #include <dt-bindings/clock/qcom,gpucc-sdm845.h> - #include <dt-bindings/clock/qcom,gcc-sdm845.h> - #include <dt-bindings/interrupt-controller/irq.h> - #include <dt-bindings/interrupt-controller/arm-gic.h> + - | + #include <dt-bindings/clock/qcom,gpucc-sdm845.h> + #include <dt-bindings/clock/qcom,gcc-sdm845.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> - gmu: gmu@506a000 { - compatible="qcom,adreno-gmu-630.2", "qcom,adreno-gmu"; + gmu: gmu@506a000 { + compatible = "qcom,adreno-gmu-630.2", "qcom,adreno-gmu"; reg = <0x506a000 0x30000>, <0xb280000 0x10000>, @@ -120,4 +311,13 @@ examples: iommus = <&adreno_smmu 5>; operating-points-v2 = <&gmu_opp_table>; - }; + }; + + gmu_wrapper: gmu@596a000 { + compatible = "qcom,adreno-gmu-wrapper"; + reg = <0x0596a000 0x30000>; + reg-names = "gmu"; + power-domains = <&gpucc GPU_CX_GDSC>, + <&gpucc GPU_GX_GDSC>; + power-domain-names = "cx", "gx"; + }; diff --git a/dts/Bindings/display/msm/gpu.txt b/dts/Bindings/display/msm/gpu.txt deleted file mode 100644 index fd779cd699..0000000000 --- a/dts/Bindings/display/msm/gpu.txt +++ /dev/null @@ -1,122 +0,0 @@ -Qualcomm adreno/snapdragon GPU - -Required properties: -- compatible: "qcom,adreno-XYZ.W", "qcom,adreno" or - "amd,imageon-XYZ.W", "amd,imageon" - for example: "qcom,adreno-306.0", "qcom,adreno" - Note that you need to list the less specific "qcom,adreno" (since this - is what the device is matched on), in addition to the more specific - with the chip-id. - If "amd,imageon" is used, there should be no top level msm device. -- reg: Physical base address and length of the controller's registers. -- interrupts: The interrupt signal from the gpu. -- clocks: device clocks (if applicable) - See ../clocks/clock-bindings.txt for details. -- clock-names: the following clocks are required by a3xx, a4xx and a5xx - cores: - * "core" - * "iface" - * "mem_iface" - For GMU attached devices the GPU clocks are not used and are not required. The - following devices should not list clocks: - - qcom,adreno-630.2 -- iommus: optional phandle to an adreno iommu instance -- operating-points-v2: optional phandle to the OPP operating points -- interconnects: optional phandle to an interconnect provider. See - ../interconnect/interconnect.txt for details. Some A3xx and all A4xx platforms - will have two paths; all others will have one path. -- interconnect-names: The names of the interconnect paths that correspond to the - interconnects property. Values must be gfx-mem and ocmem. -- qcom,gmu: For GMU attached devices a phandle to the GMU device that will - control the power for the GPU. Applicable targets: - - qcom,adreno-630.2 -- zap-shader: For a5xx and a6xx devices this node contains a memory-region that - points to reserved memory to store the zap shader that can be used to help - bring the GPU out of secure mode. -- firmware-name: optional property of the 'zap-shader' node, listing the - relative path of the device specific zap firmware. -- sram: phandle to the On Chip Memory (OCMEM) that's present on some a3xx and - a4xx Snapdragon SoCs. See - Documentation/devicetree/bindings/sram/qcom,ocmem.yaml. - -Example 3xx/4xx: - -/ { - ... - - gpu: adreno@fdb00000 { - compatible = "qcom,adreno-330.2", - "qcom,adreno"; - reg = <0xfdb00000 0x10000>; - reg-names = "kgsl_3d0_reg_memory"; - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "kgsl_3d0_irq"; - clock-names = "core", - "iface", - "mem_iface"; - clocks = <&mmcc OXILI_GFX3D_CLK>, - <&mmcc OXILICX_AHB_CLK>, - <&mmcc OXILICX_AXI_CLK>; - sram = <&gpu_sram>; - power-domains = <&mmcc OXILICX_GDSC>; - operating-points-v2 = <&gpu_opp_table>; - iommus = <&gpu_iommu 0>; - }; - - gpu_sram: ocmem@fdd00000 { - compatible = "qcom,msm8974-ocmem"; - - reg = <0xfdd00000 0x2000>, - <0xfec00000 0x180000>; - reg-names = "ctrl", - "mem"; - - clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, - <&mmcc OCMEMCX_OCMEMNOC_CLK>; - clock-names = "core", - "iface"; - - #address-cells = <1>; - #size-cells = <1>; - - gpu_sram: gpu-sram@0 { - reg = <0x0 0x100000>; - ranges = <0 0 0xfec00000 0x100000>; - }; - }; -}; - -Example a6xx (with GMU): - -/ { - ... - - gpu@5000000 { - compatible = "qcom,adreno-630.2", "qcom,adreno"; - #stream-id-cells = <16>; - - reg = <0x5000000 0x40000>, <0x509e000 0x10>; - reg-names = "kgsl_3d0_reg_memory", "cx_mem"; - - /* - * Look ma, no clocks! The GPU clocks and power are - * controlled entirely by the GMU - */ - - interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; - - iommus = <&adreno_smmu 0>; - - operating-points-v2 = <&gpu_opp_table>; - - interconnects = <&rsc_hlos MASTER_GFX3D &rsc_hlos SLAVE_EBI1>; - interconnect-names = "gfx-mem"; - - qcom,gmu = <&gmu>; - - zap-shader { - memory-region = <&zap_shader_region>; - firmware-name = "qcom/LENOVO/81JL/qcdxkmsuc850.mbn" - }; - }; -}; diff --git a/dts/Bindings/display/msm/gpu.yaml b/dts/Bindings/display/msm/gpu.yaml new file mode 100644 index 0000000000..b019db9547 --- /dev/null +++ b/dts/Bindings/display/msm/gpu.yaml @@ -0,0 +1,343 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: http://devicetree.org/schemas/display/msm/gpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Adreno or Snapdragon GPUs + +maintainers: + - Rob Clark <robdclark@gmail.com> + +properties: + compatible: + oneOf: + - description: | + The driver is parsing the compat string for Adreno to + figure out the chip-id. + items: + - pattern: '^qcom,adreno-[0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f]$' + - const: qcom,adreno + - description: | + The driver is parsing the compat string for Adreno to + figure out the gpu-id and patch level. + items: + - pattern: '^qcom,adreno-[3-7][0-9][0-9]\.[0-9]$' + - const: qcom,adreno + - description: | + The driver is parsing the compat string for Imageon to + figure out the gpu-id and patch level. + items: + - pattern: '^amd,imageon-200\.[0-1]$' + - const: amd,imageon + + clocks: true + + clock-names: true + + reg: + minItems: 1 + maxItems: 3 + + reg-names: + minItems: 1 + maxItems: 3 + + interrupts: + maxItems: 1 + + interrupt-names: + maxItems: 1 + + interconnects: + minItems: 1 + maxItems: 2 + + interconnect-names: + minItems: 1 + items: + - const: gfx-mem + - const: ocmem + + iommus: + minItems: 1 + maxItems: 64 + + sram: + $ref: /schemas/types.yaml#/definitions/phandle-array + minItems: 1 + maxItems: 4 + items: + maxItems: 1 + description: | + phandles to one or more reserved on-chip SRAM regions. + phandle to the On Chip Memory (OCMEM) that's present on some a3xx and + a4xx Snapdragon SoCs. See + Documentation/devicetree/bindings/sram/qcom,ocmem.yaml + + operating-points-v2: true + opp-table: + type: object + + power-domains: + maxItems: 1 + + zap-shader: + type: object + additionalProperties: false + description: | + For a5xx and a6xx devices this node contains a memory-region that + points to reserved memory to store the zap shader that can be used to + help bring the GPU out of secure mode. + properties: + memory-region: + maxItems: 1 + + firmware-name: + description: | + Default name of the firmware to load to the remote processor. + + "#cooling-cells": + const: 2 + + nvmem-cell-names: + maxItems: 1 + + nvmem-cells: + description: efuse registers + maxItems: 1 + + qcom,gmu: + $ref: /schemas/types.yaml#/definitions/phandle + description: | + For GMU attached devices a phandle to the GMU device that will + control the power for the GPU. + + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + pattern: '^qcom,adreno-[3-5][0-9][0-9]\.[0-9]$' + + then: + properties: + clocks: + minItems: 2 + maxItems: 7 + + clock-names: + items: + anyOf: + - const: core + description: GPU Core clock + - const: iface + description: GPU Interface clock + - const: mem + description: GPU Memory clock + - const: mem_iface + description: GPU Memory Interface clock + - const: alt_mem_iface + description: GPU Alternative Memory Interface clock + - const: gfx3d + description: GPU 3D engine clock + - const: rbbmtimer + description: GPU RBBM Timer for Adreno 5xx series + - const: rbcpr + description: GPU RB Core Power Reduction clock + minItems: 2 + maxItems: 7 + + required: + - clocks + - clock-names + + - if: + properties: + compatible: + contains: + enum: + - qcom,adreno-610.0 + - qcom,adreno-619.1 + then: + properties: + clocks: + minItems: 6 + maxItems: 6 + + clock-names: + items: + - const: core + description: GPU Core clock + - const: iface + description: GPU Interface clock + - const: mem_iface + description: GPU Memory Interface clock + - const: alt_mem_iface + description: GPU Alternative Memory Interface clock + - const: gmu + description: CX GMU clock + - const: xo + description: GPUCC clocksource clock + + reg-names: + minItems: 1 + items: + - const: kgsl_3d0_reg_memory + - const: cx_dbgc + + required: + - clocks + - clock-names + else: + if: + properties: + compatible: + contains: + pattern: '^qcom,adreno-[67][0-9][0-9]\.[0-9]$' + + then: # Starting with A6xx, the clocks are usually defined in the GMU node + properties: + clocks: false + clock-names: false + + reg-names: + minItems: 1 + items: + - const: kgsl_3d0_reg_memory + - const: cx_mem + - const: cx_dbgc + +examples: + - | + + // Example a3xx/4xx: + + #include <dt-bindings/clock/qcom,mmcc-msm8974.h> + #include <dt-bindings/clock/qcom,rpmcc.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + gpu: gpu@fdb00000 { + compatible = "qcom,adreno-330.2", "qcom,adreno"; + + reg = <0xfdb00000 0x10000>; + reg-names = "kgsl_3d0_reg_memory"; + + clock-names = "core", "iface", "mem_iface"; + clocks = <&mmcc OXILI_GFX3D_CLK>, + <&mmcc OXILICX_AHB_CLK>, + <&mmcc OXILICX_AXI_CLK>; + + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "kgsl_3d0_irq"; + + sram = <&gpu_sram>; + power-domains = <&mmcc OXILICX_GDSC>; + operating-points-v2 = <&gpu_opp_table>; + iommus = <&gpu_iommu 0>; + #cooling-cells = <2>; + }; + + ocmem@fdd00000 { + compatible = "qcom,msm8974-ocmem"; + + reg = <0xfdd00000 0x2000>, + <0xfec00000 0x180000>; + reg-names = "ctrl", "mem"; + + clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, + <&mmcc OCMEMCX_OCMEMNOC_CLK>; + clock-names = "core", "iface"; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xfec00000 0x100000>; + + gpu_sram: gpu-sram@0 { + reg = <0x0 0x100000>; + }; + }; + - | + + // Example a6xx (with GMU): + + #include <dt-bindings/clock/qcom,gpucc-sdm845.h> + #include <dt-bindings/clock/qcom,gcc-sdm845.h> + #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interconnect/qcom,sdm845.h> + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + + zap_shader_region: gpu@8f200000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x90b00000 0x0 0xa00000>; + no-map; + }; + }; + + gpu@5000000 { + compatible = "qcom,adreno-630.2", "qcom,adreno"; + + reg = <0x5000000 0x40000>, <0x509e000 0x10>; + reg-names = "kgsl_3d0_reg_memory", "cx_mem"; + + #cooling-cells = <2>; + + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; + + iommus = <&adreno_smmu 0>; + + operating-points-v2 = <&gpu_opp_table>; + + interconnects = <&rsc_hlos MASTER_GFX3D &rsc_hlos SLAVE_EBI1>; + interconnect-names = "gfx-mem"; + + qcom,gmu = <&gmu>; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-430000000 { + opp-hz = /bits/ 64 <430000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + opp-peak-kBps = <5412000>; + }; + + opp-355000000 { + opp-hz = /bits/ 64 <355000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + opp-peak-kBps = <3072000>; + }; + + opp-267000000 { + opp-hz = /bits/ 64 <267000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + opp-peak-kBps = <3072000>; + }; + + opp-180000000 { + opp-hz = /bits/ 64 <180000000>; + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + opp-peak-kBps = <1804000>; + }; + }; + + zap-shader { + memory-region = <&zap_shader_region>; + firmware-name = "qcom/LENOVO/81JL/qcdxkmsuc850.mbn"; + }; + }; diff --git a/dts/Bindings/display/msm/hdmi.txt b/dts/Bindings/display/msm/hdmi.txt deleted file mode 100644 index 5f90a40da5..0000000000 --- a/dts/Bindings/display/msm/hdmi.txt +++ /dev/null @@ -1,99 +0,0 @@ -Qualcomm adreno/snapdragon hdmi output - -Required properties: -- compatible: one of the following - * "qcom,hdmi-tx-8996" - * "qcom,hdmi-tx-8994" - * "qcom,hdmi-tx-8084" - * "qcom,hdmi-tx-8974" - * "qcom,hdmi-tx-8660" - * "qcom,hdmi-tx-8960" -- reg: Physical base address and length of the controller's registers -- reg-names: "core_physical" -- interrupts: The interrupt signal from the hdmi block. -- power-domains: Should be <&mmcc MDSS_GDSC>. -- clocks: device clocks - See ../clocks/clock-bindings.txt for details. -- core-vdda-supply: phandle to supply regulator -- hdmi-mux-supply: phandle to mux regulator -- phys: the phandle for the HDMI PHY device -- phy-names: the name of the corresponding PHY device - -Optional properties: -- hpd-gpios: hpd pin -- qcom,hdmi-tx-mux-en-gpios: hdmi mux enable pin -- qcom,hdmi-tx-mux-sel-gpios: hdmi mux select pin -- qcom,hdmi-tx-mux-lpm-gpios: hdmi mux lpm pin -- power-domains: reference to the power domain(s), if available. -- pinctrl-names: the pin control state names; should contain "default" -- pinctrl-0: the default pinctrl state (active) -- pinctrl-1: the "sleep" pinctrl state - -HDMI PHY: -Required properties: -- compatible: Could be the following - * "qcom,hdmi-phy-8660" - * "qcom,hdmi-phy-8960" - * "qcom,hdmi-phy-8974" - * "qcom,hdmi-phy-8084" - * "qcom,hdmi-phy-8996" -- #phy-cells: Number of cells in a PHY specifier; Should be 0. -- reg: Physical base address and length of the registers of the PHY sub blocks. -- reg-names: The names of register regions. The following regions are required: - * "hdmi_phy" - * "hdmi_pll" - For HDMI PHY on msm8996, these additional register regions are required: - * "hdmi_tx_l0" - * "hdmi_tx_l1" - * "hdmi_tx_l3" - * "hdmi_tx_l4" -- power-domains: Should be <&mmcc MDSS_GDSC>. -- clocks: device clocks - See Documentation/devicetree/bindings/clock/clock-bindings.txt for details. -- core-vdda-supply: phandle to vdda regulator device node - -Example: - -/ { - ... - - hdmi: hdmi@4a00000 { - compatible = "qcom,hdmi-tx-8960"; - reg-names = "core_physical"; - reg = <0x04a00000 0x2f0>; - interrupts = <GIC_SPI 79 0>; - power-domains = <&mmcc MDSS_GDSC>; - clock-names = - "core", - "master_iface", - "slave_iface"; - clocks = - <&mmcc HDMI_APP_CLK>, - <&mmcc HDMI_M_AHB_CLK>, - <&mmcc HDMI_S_AHB_CLK>; - qcom,hdmi-tx-ddc-clk = <&msmgpio 70 GPIO_ACTIVE_HIGH>; - qcom,hdmi-tx-ddc-data = <&msmgpio 71 GPIO_ACTIVE_HIGH>; - qcom,hdmi-tx-hpd = <&msmgpio 72 GPIO_ACTIVE_HIGH>; - core-vdda-supply = <&pm8921_hdmi_mvs>; - hdmi-mux-supply = <&ext_3p3v>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&hpd_active &ddc_active &cec_active>; - pinctrl-1 = <&hpd_suspend &ddc_suspend &cec_suspend>; - - phys = <&hdmi_phy>; - phy-names = "hdmi_phy"; - }; - - hdmi_phy: phy@4a00400 { - compatible = "qcom,hdmi-phy-8960"; - reg-names = "hdmi_phy", - "hdmi_pll"; - reg = <0x4a00400 0x60>, - <0x4a00500 0x100>; - #phy-cells = <0>; - power-domains = <&mmcc MDSS_GDSC>; - clock-names = "slave_iface"; - clocks = <&mmcc HDMI_S_AHB_CLK>; - core-vdda-supply = <&pm8921_hdmi_mvs>; - }; -}; diff --git a/dts/Bindings/display/msm/hdmi.yaml b/dts/Bindings/display/msm/hdmi.yaml new file mode 100644 index 0000000000..47e9766982 --- /dev/null +++ b/dts/Bindings/display/msm/hdmi.yaml @@ -0,0 +1,232 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: http://devicetree.org/schemas/display/msm/hdmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Adreno/Snapdragon HDMI output + +maintainers: + - Rob Clark <robdclark@gmail.com> + +properties: + compatible: + enum: + - qcom,hdmi-tx-8084 + - qcom,hdmi-tx-8660 + - qcom,hdmi-tx-8960 + - qcom,hdmi-tx-8974 + - qcom,hdmi-tx-8994 + - qcom,hdmi-tx-8996 + + clocks: + minItems: 1 + maxItems: 5 + + clock-names: + minItems: 1 + maxItems: 5 + + reg: + minItems: 1 + maxItems: 3 + + reg-names: + minItems: 1 + items: + - const: core_physical + - const: qfprom_physical + - const: hdcp_physical + + interrupts: + maxItems: 1 + + phys: + maxItems: 1 + + phy-names: + enum: + - hdmi_phy + - hdmi-phy + deprecated: true + + core-vdda-supply: + description: phandle to VDDA supply regulator + + hdmi-mux-supply: + description: phandle to mux regulator + deprecated: true + + core-vcc-supply: + description: phandle to VCC supply regulator + + hpd-gpios: + maxItems: 1 + description: hpd pin + + qcom,hdmi-tx-mux-en-gpios: + maxItems: 1 + deprecated: true + description: HDMI mux enable pin + + qcom,hdmi-tx-mux-sel-gpios: + maxItems: 1 + deprecated: true + description: HDMI mux select pin + + qcom,hdmi-tx-mux-lpm-gpios: + maxItems: 1 + deprecated: true + description: HDMI mux lpm pin + + '#sound-dai-cells': + const: 1 + + ports: + type: object + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + description: | + Input endpoints of the controller. + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + description: | + Output endpoints of the controller. + + required: + - port@0 + +required: + - compatible + - clocks + - clock-names + - reg + - reg-names + - interrupts + - phys + +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,hdmi-tx-8960 + - qcom,hdmi-tx-8660 + then: + properties: + clocks: + minItems: 3 + maxItems: 3 + clock-names: + items: + - const: core + - const: master_iface + - const: slave_iface + core-vcc-supplies: false + + - if: + properties: + compatible: + contains: + enum: + - qcom,hdmi-tx-8974 + - qcom,hdmi-tx-8084 + - qcom,hdmi-tx-8994 + - qcom,hdmi-tx-8996 + then: + properties: + clocks: + minItems: 5 + clock-names: + items: + - const: mdp_core + - const: iface + - const: core + - const: alt_iface + - const: extp + hdmi-mux-supplies: false + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + hdmi: hdmi@4a00000 { + compatible = "qcom,hdmi-tx-8960"; + reg-names = "core_physical"; + reg = <0x04a00000 0x2f0>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", + "master_iface", + "slave_iface"; + clocks = <&clk 61>, + <&clk 72>, + <&clk 98>; + hpd-gpios = <&msmgpio 72 GPIO_ACTIVE_HIGH>; + core-vdda-supply = <&pm8921_hdmi_mvs>; + hdmi-mux-supply = <&ext_3p3v>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&hpd_active &ddc_active &cec_active>; + pinctrl-1 = <&hpd_suspend &ddc_suspend &cec_suspend>; + + phys = <&hdmi_phy>; + }; + - | + #include <dt-bindings/clock/qcom,gcc-msm8996.h> + #include <dt-bindings/clock/qcom,mmcc-msm8996.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + hdmi@9a0000 { + compatible = "qcom,hdmi-tx-8996"; + reg = <0x009a0000 0x50c>, + <0x00070000 0x6158>, + <0x009e0000 0xfff>; + reg-names = "core_physical", + "qfprom_physical", + "hdcp_physical"; + + interrupt-parent = <&mdss>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_HDMI_CLK>, + <&mmcc MDSS_HDMI_AHB_CLK>, + <&mmcc MDSS_EXTPCLK_CLK>; + clock-names = "mdp_core", + "iface", + "core", + "alt_iface", + "extp"; + + phys = <&hdmi_phy>; + #sound-dai-cells = <1>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>; + pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>; + + core-vdda-supply = <&vreg_l12a_1p8>; + core-vcc-supply = <&vreg_s4a_1p8>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&mdp5_intf3_out>; + }; + }; + }; + }; +... diff --git a/dts/Bindings/display/msm/mdp4.txt b/dts/Bindings/display/msm/mdp4.txt deleted file mode 100644 index b07eeb38f7..0000000000 --- a/dts/Bindings/display/msm/mdp4.txt +++ /dev/null @@ -1,114 +0,0 @@ -Qualcomm adreno/snapdragon MDP4 display controller - -Description: - -This is the bindings documentation for the MDP4 display controller found in -SoCs like MSM8960, APQ8064 and MSM8660. - -Required properties: -- compatible: - * "qcom,mdp4" - mdp4 -- reg: Physical base address and length of the controller's registers. -- interrupts: The interrupt signal from the display controller. -- clocks: device clocks - See ../clocks/clock-bindings.txt for details. -- clock-names: the following clocks are required. - * "core_clk" - * "iface_clk" - * "bus_clk" - * "lut_clk" - * "hdmi_clk" - * "tv_clk" -- ports: contains the list of output ports from MDP. These connect to interfaces - that are external to the MDP hardware, such as HDMI, DSI, EDP etc (LVDS is a - special case since it is a part of the MDP block itself). - - Each output port contains an endpoint that describes how it is connected to an - external interface. These are described by the standard properties documented - here: - Documentation/devicetree/bindings/graph.txt - Documentation/devicetree/bindings/media/video-interfaces.txt - - The output port mappings are: - Port 0 -> LCDC/LVDS - Port 1 -> DSI1 Cmd/Video - Port 2 -> DSI2 Cmd/Video - Port 3 -> DTV - -Optional properties: -- clock-names: the following clocks are optional: - * "lut_clk" -- qcom,lcdc-align-lsb: Boolean value indicating that LSB alignment should be - used for LCDC. This is only valid for 18bpp panels. - -Example: - -/ { - ... - - hdmi: hdmi@4a00000 { - ... - ports { - ... - port@0 { - reg = <0>; - hdmi_in: endpoint { - remote-endpoint = <&mdp_dtv_out>; - }; - }; - ... - }; - ... - }; - - ... - - mdp: mdp@5100000 { - compatible = "qcom,mdp4"; - reg = <0x05100000 0xf0000>; - interrupts = <GIC_SPI 75 0>; - clock-names = - "core_clk", - "iface_clk", - "lut_clk", - "hdmi_clk", - "tv_clk"; - clocks = - <&mmcc MDP_CLK>, - <&mmcc MDP_AHB_CLK>, - <&mmcc MDP_AXI_CLK>, - <&mmcc MDP_LUT_CLK>, - <&mmcc HDMI_TV_CLK>, - <&mmcc MDP_TV_CLK>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - mdp_lvds_out: endpoint { - }; - }; - - port@1 { - reg = <1>; - mdp_dsi1_out: endpoint { - }; - }; - - port@2 { - reg = <2>; - mdp_dsi2_out: endpoint { - }; - }; - - port@3 { - reg = <3>; - mdp_dtv_out: endpoint { - remote-endpoint = <&hdmi_in>; - }; - }; - }; - }; -}; diff --git a/dts/Bindings/display/msm/mdp4.yaml b/dts/Bindings/display/msm/mdp4.yaml new file mode 100644 index 0000000000..35204a2875 --- /dev/null +++ b/dts/Bindings/display/msm/mdp4.yaml @@ -0,0 +1,124 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/mdp4.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Adreno/Snapdragon MDP4 display controller + +description: > + MDP4 display controller found in SoCs like MSM8960, APQ8064 and MSM8660. + +maintainers: + - Rob Clark <robdclark@gmail.com> + +properties: + compatible: + const: qcom,mdp4 + + clocks: + minItems: 6 + maxItems: 6 + + clock-names: + items: + - const: core_clk + - const: iface_clk + - const: bus_clk + - const: lut_clk + - const: hdmi_clk + - const: tv_clk + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + iommus: + maxItems: 4 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: LCDC/LVDS + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: DSI1 Cmd / Video + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: DSI2 Cmd / Video + + port@3: + $ref: /schemas/graph.yaml#/properties/port + description: Digital TV + + qcom,lcdc-align-lsb: + type: boolean + description: > + Indication that LSB alignment should be used for LCDC. + This is only valid for 18bpp panels. + +required: + - compatible + - reg + - clocks + - ports + +additionalProperties: false + +examples: + - | + mdp: mdp@5100000 { + compatible = "qcom,mdp4"; + reg = <0x05100000 0xf0000>; + interrupts = <0 75 0>; + clock-names = + "core_clk", + "iface_clk", + "bus_clk", + "lut_clk", + "hdmi_clk", + "tv_clk"; + clocks = + <&mmcc 77>, + <&mmcc 86>, + <&mmcc 102>, + <&mmcc 75>, + <&mmcc 97>, + <&mmcc 12>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdp_lvds_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + mdp_dsi1_out: endpoint { + }; + }; + + port@2 { + reg = <2>; + mdp_dsi2_out: endpoint { + }; + }; + + port@3 { + reg = <3>; + mdp_dtv_out: endpoint { + remote-endpoint = <&hdmi_in>; + }; + }; + }; + }; diff --git a/dts/Bindings/display/msm/mdp5.txt b/dts/Bindings/display/msm/mdp5.txt deleted file mode 100644 index 43d11279c9..0000000000 --- a/dts/Bindings/display/msm/mdp5.txt +++ /dev/null @@ -1,160 +0,0 @@ -Qualcomm adreno/snapdragon MDP5 display controller - -Description: - -This is the bindings documentation for the Mobile Display Subsytem(MDSS) that -encapsulates sub-blocks like MDP5, DSI, HDMI, eDP etc, and the MDP5 display -controller found in SoCs like MSM8974, APQ8084, MSM8916, MSM8994 and MSM8996. - -MDSS: -Required properties: -- compatible: - * "qcom,mdss" - MDSS -- reg: Physical base address and length of the controller's registers. -- reg-names: The names of register regions. The following regions are required: - * "mdss_phys" - * "vbif_phys" -- interrupts: The interrupt signal from MDSS. -- interrupt-controller: identifies the node as an interrupt controller. -- #interrupt-cells: specifies the number of cells needed to encode an interrupt - source, should be 1. -- power-domains: a power domain consumer specifier according to - Documentation/devicetree/bindings/power/power_domain.txt -- clocks: device clocks. See ../clocks/clock-bindings.txt for details. -- clock-names: the following clocks are required. - * "iface" - * "bus" - * "vsync" -- #address-cells: number of address cells for the MDSS children. Should be 1. -- #size-cells: Should be 1. -- ranges: parent bus address space is the same as the child bus address space. - -Optional properties: -- clock-names: the following clocks are optional: - * "lut" - -MDP5: -Required properties: -- compatible: - * "qcom,mdp5" - MDP5 -- reg: Physical base address and length of the controller's registers. -- reg-names: The names of register regions. The following regions are required: - * "mdp_phys" -- interrupts: Interrupt line from MDP5 to MDSS interrupt controller. -- clocks: device clocks. See ../clocks/clock-bindings.txt for details. -- clock-names: the following clocks are required. -- * "bus" -- * "iface" -- * "core" -- * "vsync" -- ports: contains the list of output ports from MDP. These connect to interfaces - that are external to the MDP hardware, such as HDMI, DSI, EDP etc (LVDS is a - special case since it is a part of the MDP block itself). - - Each output port contains an endpoint that describes how it is connected to an - external interface. These are described by the standard properties documented - here: - Documentation/devicetree/bindings/graph.txt - Documentation/devicetree/bindings/media/video-interfaces.txt - - The availability of output ports can vary across SoC revisions: - - For MSM8974 and APQ8084: - Port 0 -> MDP_INTF0 (eDP) - Port 1 -> MDP_INTF1 (DSI1) - Port 2 -> MDP_INTF2 (DSI2) - Port 3 -> MDP_INTF3 (HDMI) - - For MSM8916: - Port 0 -> MDP_INTF1 (DSI1) - - For MSM8994 and MSM8996: - Port 0 -> MDP_INTF1 (DSI1) - Port 1 -> MDP_INTF2 (DSI2) - Port 2 -> MDP_INTF3 (HDMI) - -Optional properties: -- clock-names: the following clocks are optional: - * "lut" - * "tbu" - * "tbu_rt" - -Example: - -/ { - ... - - mdss: mdss@1a00000 { - compatible = "qcom,mdss"; - reg = <0x1a00000 0x1000>, - <0x1ac8000 0x3000>; - reg-names = "mdss_phys", "vbif_phys"; - - power-domains = <&gcc MDSS_GDSC>; - - clocks = <&gcc GCC_MDSS_AHB_CLK>, - <&gcc GCC_MDSS_AXI_CLK>, - <&gcc GCC_MDSS_VSYNC_CLK>; - clock-names = "iface", - "bus", - "vsync" - - interrupts = <0 72 0>; - - interrupt-controller; - #interrupt-cells = <1>; - - #address-cells = <1>; - #size-cells = <1>; - ranges; - - mdp: mdp@1a01000 { - compatible = "qcom,mdp5"; - reg = <0x1a01000 0x90000>; - reg-names = "mdp_phys"; - - interrupt-parent = <&mdss>; - interrupts = <0 0>; - - clocks = <&gcc GCC_MDSS_AHB_CLK>, - <&gcc GCC_MDSS_AXI_CLK>, - <&gcc GCC_MDSS_MDP_CLK>, - <&gcc GCC_MDSS_VSYNC_CLK>; - clock-names = "iface", - "bus", - "core", - "vsync"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - mdp5_intf1_out: endpoint { - remote-endpoint = <&dsi0_in>; - }; - }; - }; - }; - - dsi0: dsi@1a98000 { - ... - ports { - ... - port@0 { - reg = <0>; - dsi0_in: endpoint { - remote-endpoint = <&mdp5_intf1_out>; - }; - }; - ... - }; - ... - }; - - dsi_phy0: dsi-phy@1a98300 { - ... - }; - }; -}; diff --git a/dts/Bindings/display/msm/mdss-common.yaml b/dts/Bindings/display/msm/mdss-common.yaml new file mode 100644 index 0000000000..c6305a6e03 --- /dev/null +++ b/dts/Bindings/display/msm/mdss-common.yaml @@ -0,0 +1,106 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/mdss-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display MDSS common properties + +maintainers: + - Krishna Manikandan <quic_mkrishn@quicinc.com> + - Dmitry Baryshkov <dmitry.baryshkov@linaro.org> + - Rob Clark <robdclark@gmail.com> + +description: + Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates + sub-blocks like DPU display controller, DSI and DP interfaces etc. + +# Do not select this by default, otherwise it is also selected for qcom,mdss +# devices. +select: + false + +properties: + $nodename: + pattern: "^display-subsystem@[0-9a-f]+$" + + reg: + maxItems: 1 + + reg-names: + const: mdss + + power-domains: + maxItems: 1 + + clocks: + minItems: 2 + maxItems: 4 + + clock-names: + minItems: 2 + maxItems: 4 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#address-cells": true + + "#size-cells": true + + "#interrupt-cells": + const: 1 + + iommus: + minItems: 1 + items: + - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0 + - description: Phandle to apps_smmu node with SID mask for Hard-Fail port1 + + ranges: true + + # This is not a perfect description, but it's impossible to discern and match + # the entries like we do with interconnect-names + interconnects: + minItems: 1 + items: + - description: Interconnect path from mdp0 (or a single mdp) port to the data bus + - description: Interconnect path from mdp1 port to the data bus + - description: Interconnect path from CPU to the reg bus + + interconnect-names: + oneOf: + - minItems: 1 + items: + - const: mdp0-mem + - const: cpu-cfg + + - minItems: 2 + items: + - const: mdp0-mem + - const: mdp1-mem + - const: cpu-cfg + + resets: + items: + - description: MDSS_CORE reset + + memory-region: + maxItems: 1 + description: + Phandle to a node describing a reserved framebuffer memory region. + For example, the splash memory region set up by the bootloader. + +required: + - reg + - reg-names + - power-domains + - clocks + - interrupts + - interrupt-controller + - iommus + - ranges + +additionalProperties: true diff --git a/dts/Bindings/display/msm/qcom,mdp5.yaml b/dts/Bindings/display/msm/qcom,mdp5.yaml new file mode 100644 index 0000000000..91c774f106 --- /dev/null +++ b/dts/Bindings/display/msm/qcom,mdp5.yaml @@ -0,0 +1,157 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,mdp5.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Adreno/Snapdragon Mobile Display controller (MDP5) + +description: + MDP5 display controller found in SoCs like MSM8974, APQ8084, MSM8916, MSM8994 + and MSM8996. + +maintainers: + - Dmitry Baryshkov <dmitry.baryshkov@linaro.org> + - Rob Clark <robdclark@gmail.com> + +properties: + compatible: + oneOf: + - const: qcom,mdp5 + deprecated: true + - items: + - enum: + - qcom,apq8084-mdp5 + - qcom,msm8226-mdp5 + - qcom,msm8916-mdp5 + - qcom,msm8917-mdp5 + - qcom,msm8953-mdp5 + - qcom,msm8974-mdp5 + - qcom,msm8976-mdp5 + - qcom,msm8994-mdp5 + - qcom,msm8996-mdp5 + - qcom,sdm630-mdp5 + - qcom,sdm660-mdp5 + - const: qcom,mdp5 + + $nodename: + pattern: '^display-controller@[0-9a-f]+$' + + reg: + maxItems: 1 + + reg-names: + items: + - const: mdp_phys + + interrupts: + maxItems: 1 + + clocks: + minItems: 4 + maxItems: 7 + + clock-names: + oneOf: + - minItems: 4 + items: + - const: iface + - const: bus + - const: core + - const: vsync + - const: lut + - const: tbu + - const: tbu_rt + # MSM8996 has additional iommu clock + - items: + - const: iface + - const: bus + - const: core + - const: iommu + - const: vsync + + interconnects: + minItems: 1 + items: + - description: Interconnect path from mdp0 (or a single mdp) port to the data bus + - description: Interconnect path from mdp1 port to the data bus + - description: Interconnect path from rotator port to the data bus + + interconnect-names: + minItems: 1 + items: + - const: mdp0-mem + - const: mdp1-mem + - const: rotator-mem + + iommus: + items: + - description: apps SMMU with the Stream-ID mask for Hard-Fail port0 + + power-domains: + maxItems: 1 + + operating-points-v2: true + opp-table: + type: object + + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: > + Contains the list of output ports from DPU device. These ports + connect to interfaces that are external to the DPU hardware, + such as DSI, DP etc. MDP5 devices support up to 4 ports: + one or two DSI ports, HDMI and eDP. + + patternProperties: + "^port@[0-3]+$": + $ref: /schemas/graph.yaml#/properties/port + + # at least one port is required + required: + - port@0 + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-msm8916.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + display-controller@1a01000 { + compatible = "qcom,mdp5"; + reg = <0x1a01000 0x90000>; + reg-names = "mdp_phys"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "core", + "vsync"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + }; + }; +... diff --git a/dts/Bindings/display/msm/qcom,mdss.yaml b/dts/Bindings/display/msm/qcom,mdss.yaml new file mode 100644 index 0000000000..0999ea07f4 --- /dev/null +++ b/dts/Bindings/display/msm/qcom,mdss.yaml @@ -0,0 +1,212 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Mobile Display SubSystem (MDSS) + +maintainers: + - Dmitry Baryshkov <dmitry.baryshkov@linaro.org> + - Rob Clark <robdclark@gmail.com> + +description: + This is the bindings documentation for the Mobile Display Subsystem(MDSS) that + encapsulates sub-blocks like MDP5, DSI, HDMI, eDP, etc. + +properties: + $nodename: + pattern: "^display-subsystem@[0-9a-f]+$" + + compatible: + enum: + - qcom,mdss + + reg: + minItems: 2 + maxItems: 3 + + reg-names: + minItems: 2 + items: + - const: mdss_phys + - const: vbif_phys + - const: vbif_nrt_phys + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 1 + + power-domains: + maxItems: 1 + description: | + The MDSS power domain provided by GCC + + clocks: + oneOf: + - minItems: 3 + items: + - description: Display abh clock + - description: Display axi clock + - description: Display vsync clock + - description: Display core clock + - minItems: 1 + items: + - description: Display abh clock + - description: Display core clock + + clock-names: + oneOf: + - minItems: 3 + items: + - const: iface + - const: bus + - const: vsync + - const: core + - minItems: 1 + items: + - const: iface + - const: core + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: true + + resets: + items: + - description: MDSS_CORE reset + +required: + - compatible + - reg + - reg-names + - interrupts + - interrupt-controller + - "#interrupt-cells" + - power-domains + - clocks + - clock-names + - "#address-cells" + - "#size-cells" + - ranges + +patternProperties: + "^display-controller@[1-9a-f][0-9a-f]*$": + type: object + additionalProperties: true + properties: + compatible: + contains: + const: qcom,mdp5 + + "^dsi@[1-9a-f][0-9a-f]*$": + type: object + additionalProperties: true + properties: + compatible: + contains: + const: qcom,mdss-dsi-ctrl + + "^phy@[1-9a-f][0-9a-f]*$": + type: object + additionalProperties: true + properties: + compatible: + enum: + - qcom,dsi-phy-14nm + - qcom,dsi-phy-14nm-660 + - qcom,dsi-phy-14nm-8953 + - qcom,dsi-phy-20nm + - qcom,dsi-phy-28nm-8226 + - qcom,dsi-phy-28nm-hpm + - qcom,dsi-phy-28nm-lp + - qcom,hdmi-phy-8084 + - qcom,hdmi-phy-8660 + - qcom,hdmi-phy-8960 + - qcom,hdmi-phy-8974 + - qcom,hdmi-phy-8996 + + "^hdmi-tx@[1-9a-f][0-9a-f]*$": + type: object + additionalProperties: true + properties: + compatible: + enum: + - qcom,hdmi-tx-8084 + - qcom,hdmi-tx-8660 + - qcom,hdmi-tx-8960 + - qcom,hdmi-tx-8974 + - qcom,hdmi-tx-8994 + - qcom,hdmi-tx-8996 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-msm8916.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + display-subsystem@1a00000 { + compatible = "qcom,mdss"; + reg = <0x1a00000 0x1000>, + <0x1ac8000 0x3000>; + reg-names = "mdss_phys", "vbif_phys"; + + power-domains = <&gcc MDSS_GDSC>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "vsync"; + + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + + interrupt-controller; + #interrupt-cells = <1>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + display-controller@1a01000 { + compatible = "qcom,msm8916-mdp5", "qcom,mdp5"; + reg = <0x01a01000 0x89000>; + reg-names = "mdp_phys"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "core", + "vsync"; + + iommus = <&apps_iommu 4>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdp5_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + }; + }; + }; +... diff --git a/dts/Bindings/display/msm/qcom,msm8998-dpu.yaml b/dts/Bindings/display/msm/qcom,msm8998-dpu.yaml new file mode 100644 index 0000000000..d5a64c8a92 --- /dev/null +++ b/dts/Bindings/display/msm/qcom,msm8998-dpu.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,msm8998-dpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DPU on MSM8998 + +maintainers: + - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> + +$ref: /schemas/display/msm/dpu-common.yaml# + +properties: + compatible: + const: qcom,msm8998-dpu + + reg: + items: + - description: Address offset and size for mdp register set + - description: Address offset and size for regdma register set + - description: Address offset and size for vbif register set + - description: Address offset and size for non-realtime vbif register set + + reg-names: + items: + - const: mdp + - const: regdma + - const: vbif + - const: vbif_nrt + + clocks: + items: + - description: Display ahb clock + - description: Display axi clock + - description: Display mem-noc clock + - description: Display core clock + - description: Display vsync clock + + clock-names: + items: + - const: iface + - const: bus + - const: mnoc + - const: core + - const: vsync + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,mmcc-msm8998.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-controller@c901000 { + compatible = "qcom,msm8998-dpu"; + reg = <0x0c901000 0x8f000>, + <0x0c9a8e00 0xf0>, + <0x0c9b0000 0x2008>, + <0x0c9b8000 0x1040>; + reg-names = "mdp", "regdma", "vbif", "vbif_nrt"; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MNOC_AHB_CLK>, + <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_VSYNC_CLK>; + clock-names = "iface", "bus", "mnoc", "core", "vsync"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmpd MSM8998_VDDMX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + }; +... diff --git a/dts/Bindings/display/msm/qcom,msm8998-mdss.yaml b/dts/Bindings/display/msm/qcom,msm8998-mdss.yaml new file mode 100644 index 0000000000..2d9edab5a3 --- /dev/null +++ b/dts/Bindings/display/msm/qcom,msm8998-mdss.yaml @@ -0,0 +1,278 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,msm8998-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm MSM8998 Display MDSS + +maintainers: + - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> + +description: + Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates + sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree + bindings of MDSS are mentioned for MSM8998 target. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + const: qcom,msm8998-mdss + + clocks: + items: + - description: Display AHB clock + - description: Display AXI clock + - description: Display core clock + + clock-names: + items: + - const: iface + - const: bus + - const: core + + iommus: + maxItems: 1 + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: qcom,msm8998-dpu + + "^dsi@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + items: + - const: qcom,msm8998-dsi-ctrl + - const: qcom,mdss-dsi-ctrl + + "^phy@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: qcom,dsi-phy-10nm-8998 + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,mmcc-msm8998.h> + #include <dt-bindings/clock/qcom,rpmcc.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-subsystem@c900000 { + compatible = "qcom,msm8998-mdss"; + reg = <0x0c900000 0x1000>; + reg-names = "mdss"; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_MDP_CLK>; + clock-names = "iface", "bus", "core"; + + #address-cells = <1>; + #interrupt-cells = <1>; + #size-cells = <1>; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + iommus = <&mmss_smmu 0>; + + power-domains = <&mmcc MDSS_GDSC>; + ranges; + + display-controller@c901000 { + compatible = "qcom,msm8998-dpu"; + reg = <0x0c901000 0x8f000>, + <0x0c9a8e00 0xf0>, + <0x0c9b0000 0x2008>, + <0x0c9b8000 0x1040>; + reg-names = "mdp", "regdma", "vbif", "vbif_nrt"; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MNOC_AHB_CLK>, + <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_VSYNC_CLK>; + clock-names = "iface", "bus", "mnoc", "core", "vsync"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmpd MSM8998_VDDMX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + }; + + dsi@c994000 { + compatible = "qcom,msm8998-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0c994000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&mmcc MDSS_BYTE0_CLK>, + <&mmcc MDSS_BYTE0_INTF_CLK>, + <&mmcc MDSS_PCLK0_CLK>, + <&mmcc MDSS_ESC0_CLK>, + <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmpd MSM8998_VDDCX>; + + phys = <&dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + }; + + dsi0_phy: phy@c994400 { + compatible = "qcom,dsi-phy-10nm-8998"; + reg = <0x0c994400 0x200>, + <0x0c994600 0x280>, + <0x0c994a00 0x1e0>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "ref"; + + vdds-supply = <&pm8998_l1>; + }; + + dsi@c996000 { + compatible = "qcom,msm8998-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0c996000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5>; + + clocks = <&mmcc MDSS_BYTE1_CLK>, + <&mmcc MDSS_BYTE1_INTF_CLK>, + <&mmcc MDSS_PCLK1_CLK>, + <&mmcc MDSS_ESC1_CLK>, + <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + assigned-clocks = <&mmcc BYTE1_CLK_SRC>, <&mmcc PCLK1_CLK_SRC>; + assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmpd MSM8998_VDDCX>; + + phys = <&dsi1_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi1_in: endpoint { + remote-endpoint = <&dpu_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + dsi1_out: endpoint { + }; + }; + }; + }; + + dsi1_phy: phy@c996400 { + compatible = "qcom,dsi-phy-10nm-8998"; + reg = <0x0c996400 0x200>, + <0x0c996600 0x280>, + <0x0c996a00 0x10e>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "ref"; + + vdds-supply = <&pm8998_l1>; + }; + }; +... diff --git a/dts/Bindings/display/msm/qcom,qcm2290-dpu.yaml b/dts/Bindings/display/msm/qcom,qcm2290-dpu.yaml new file mode 100644 index 0000000000..be6cd8adb3 --- /dev/null +++ b/dts/Bindings/display/msm/qcom,qcm2290-dpu.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,qcm2290-dpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DPU on QCM2290 + +maintainers: + - Loic Poulain <loic.poulain@linaro.org> + +$ref: /schemas/display/msm/dpu-common.yaml# + +properties: + compatible: + const: qcom,qcm2290-dpu + + reg: + items: + - description: Address offset and size for mdp register set + - description: Address offset and size for vbif register set + + reg-names: + items: + - const: mdp + - const: vbif + + clocks: + items: + - description: Display AXI clock from gcc + - description: Display AHB clock from dispcc + - description: Display core clock from dispcc + - description: Display lut clock from dispcc + - description: Display vsync clock from dispcc + + clock-names: + items: + - const: bus + - const: iface + - const: core + - const: lut + - const: vsync + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-qcm2290.h> + #include <dt-bindings/clock/qcom,gcc-qcm2290.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-controller@5e01000 { + compatible = "qcom,qcm2290-dpu"; + reg = <0x05e01000 0x8f000>, + <0x05eb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", "iface", "core", "lut", "vsync"; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmpd QCM2290_VDDCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + }; + }; +... diff --git a/dts/Bindings/display/msm/qcom,qcm2290-mdss.yaml b/dts/Bindings/display/msm/qcom,qcm2290-mdss.yaml new file mode 100644 index 0000000000..f0cdb54226 --- /dev/null +++ b/dts/Bindings/display/msm/qcom,qcm2290-mdss.yaml @@ -0,0 +1,215 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,qcm2290-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm QCM220 Display MDSS + +maintainers: + - Loic Poulain <loic.poulain@linaro.org> + +description: + Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates + sub-blocks like DPU display controller and DSI. Device tree bindings of MDSS + are mentioned for QCM2290 target. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + const: qcom,qcm2290-mdss + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display AXI clock + - description: Display core clock + + clock-names: + items: + - const: iface + - const: bus + - const: core + + iommus: + maxItems: 2 + + interconnects: + items: + - description: Interconnect path from mdp0 port to the data bus + - description: Interconnect path from CPU to the reg bus + + interconnect-names: + items: + - const: mdp0-mem + - const: cpu-cfg + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: qcom,qcm2290-dpu + + "^dsi@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + items: + - const: qcom,qcm2290-dsi-ctrl + - const: qcom,mdss-dsi-ctrl + + "^phy@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: qcom,dsi-phy-14nm-2290 + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-qcm2290.h> + #include <dt-bindings/clock/qcom,gcc-qcm2290.h> + #include <dt-bindings/clock/qcom,rpmcc.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interconnect/qcom,qcm2290.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-subsystem@5e00000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "qcom,qcm2290-mdss"; + reg = <0x05e00000 0x1000>; + reg-names = "mdss"; + power-domains = <&dispcc MDSS_GDSC>; + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "bus", "core"; + + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + interconnects = <&mmrt_virt MASTER_MDP0 &bimc SLAVE_EBI1>, + <&bimc MASTER_APPSS_PROC &config_noc SLAVE_DISPLAY_CFG>; + interconnect-names = "mdp0-mem", + "cpu-cfg"; + + iommus = <&apps_smmu 0x420 0x2>, + <&apps_smmu 0x421 0x0>; + ranges; + + display-controller@5e01000 { + compatible = "qcom,qcm2290-dpu"; + reg = <0x05e01000 0x8f000>, + <0x05eb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", "iface", "core", "lut", "vsync"; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmpd QCM2290_VDDCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + }; + }; + + dsi@5e94000 { + compatible = "qcom,qcm2290-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; + reg = <0x05e94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmpd QCM2290_VDDCX>; + + phys = <&dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + }; + + dsi0_phy: phy@5e94400 { + compatible = "qcom,dsi-phy-14nm-2290"; + reg = <0x05e94400 0x100>, + <0x05e94500 0x300>, + <0x05e94800 0x188>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "ref"; + vcca-supply = <&vreg_dsi_phy>; + }; + }; +... diff --git a/dts/Bindings/display/msm/qcom,sc7180-dpu.yaml b/dts/Bindings/display/msm/qcom,sc7180-dpu.yaml new file mode 100644 index 0000000000..8137618237 --- /dev/null +++ b/dts/Bindings/display/msm/qcom,sc7180-dpu.yaml @@ -0,0 +1,125 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sc7180-dpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DPU on SC7180 + +maintainers: + - Krishna Manikandan <quic_mkrishn@quicinc.com> + +$ref: /schemas/display/msm/dpu-common.yaml# + +properties: + compatible: + enum: + - qcom,sc7180-dpu + - qcom,sm6125-dpu + - qcom,sm6350-dpu + - qcom,sm6375-dpu + + reg: + items: + - description: Address offset and size for mdp register set + - description: Address offset and size for vbif register set + + reg-names: + items: + - const: mdp + - const: vbif + + clocks: + minItems: 6 + items: + - description: Display hf axi clock + - description: Display ahb clock + - description: Display rotator clock + - description: Display lut clock + - description: Display core clock + - description: Display vsync clock + - description: Display core throttle clock + + clock-names: + minItems: 6 + items: + - const: bus + - const: iface + - const: rot + - const: lut + - const: core + - const: vsync + - const: throttle + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + +unevaluatedProperties: false + +allOf: + - if: + properties: + compatible: + enum: + - qcom,sm6375-dpu + - qcom,sm6125-dpu + + then: + properties: + clocks: + minItems: 7 + + clock-names: + minItems: 7 + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sc7180.h> + #include <dt-bindings/clock/qcom,gcc-sc7180.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-controller@ae01000 { + compatible = "qcom,sc7180-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_ROT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", "iface", "rot", "lut", "core", + "vsync"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&mdp_opp_table>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@2 { + reg = <2>; + endpoint { + remote-endpoint = <&dp_in>; + }; + }; + }; + }; +... diff --git a/dts/Bindings/display/msm/qcom,sc7180-mdss.yaml b/dts/Bindings/display/msm/qcom,sc7180-mdss.yaml new file mode 100644 index 0000000000..7a0555b15d --- /dev/null +++ b/dts/Bindings/display/msm/qcom,sc7180-mdss.yaml @@ -0,0 +1,322 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sc7180-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SC7180 Display MDSS + +maintainers: + - Krishna Manikandan <quic_mkrishn@quicinc.com> + +description: + Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates + sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree + bindings of MDSS are mentioned for SC7180 target. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + const: qcom,sc7180-mdss + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display AHB clock from dispcc + - description: Display core clock + + clock-names: + items: + - const: iface + - const: ahb + - const: core + + iommus: + maxItems: 1 + + interconnects: + items: + - description: Interconnect path from mdp0 port to the data bus + - description: Interconnect path from CPU to the reg bus + + interconnect-names: + items: + - const: mdp0-mem + - const: cpu-cfg + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: qcom,sc7180-dpu + + "^displayport-controller@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: qcom,sc7180-dp + + "^dsi@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + items: + - const: qcom,sc7180-dsi-ctrl + - const: qcom,mdss-dsi-ctrl + + "^phy@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: qcom,dsi-phy-10nm + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sc7180.h> + #include <dt-bindings/clock/qcom,gcc-sc7180.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interconnect/qcom,sdm845.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-subsystem@ae00000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "qcom,sc7180-mdss"; + reg = <0xae00000 0x1000>; + reg-names = "mdss"; + power-domains = <&dispcc MDSS_GDSC>; + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "ahb", "core"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_DISPLAY_CFG>; + interconnect-names = "mdp0-mem", + "cpu-cfg"; + + iommus = <&apps_smmu 0x800 0x2>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,sc7180-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_ROT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", "iface", "rot", "lut", "core", + "vsync"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&mdp_opp_table>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@2 { + reg = <2>; + dpu_intf0_out: endpoint { + remote-endpoint = <&dp_in>; + }; + }; + }; + }; + + dsi@ae94000 { + compatible = "qcom,sc7180-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0ae94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi_phy 0>, <&dsi_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SC7180_CX>; + + phys = <&dsi_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + + dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + dsi_phy: phy@ae94400 { + compatible = "qcom,dsi-phy-10nm"; + reg = <0x0ae94400 0x200>, + <0x0ae94600 0x280>, + <0x0ae94a00 0x1e0>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + vdds-supply = <&vreg_dsi_phy>; + }; + + displayport-controller@ae90000 { + compatible = "qcom,sc7180-dp"; + + reg = <0xae90000 0x200>, + <0xae90200 0x200>, + <0xae90400 0xc00>, + <0xae91000 0x400>, + <0xae91400 0x400>; + + interrupt-parent = <&mdss>; + interrupts = <12>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DP_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>; + clock-names = "core_iface", "core_aux", "ctrl_link", + "ctrl_link_iface", "stream_pixel"; + assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>; + assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>; + phys = <&dp_phy>; + phy-names = "dp"; + + operating-points-v2 = <&dp_opp_table>; + power-domains = <&rpmhpd SC7180_CX>; + + #sound-dai-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + dp_in: endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + dp_out: endpoint { }; + }; + }; + + dp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + }; +... diff --git a/dts/Bindings/display/msm/qcom,sc7280-dpu.yaml b/dts/Bindings/display/msm/qcom,sc7280-dpu.yaml new file mode 100644 index 0000000000..b0fbe86219 --- /dev/null +++ b/dts/Bindings/display/msm/qcom,sc7280-dpu.yaml @@ -0,0 +1,105 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sc7280-dpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DPU on SC7280 + +maintainers: + - Krishna Manikandan <quic_mkrishn@quicinc.com> + +$ref: /schemas/display/msm/dpu-common.yaml# + +properties: + compatible: + const: qcom,sc7280-dpu + + reg: + items: + - description: Address offset and size for mdp register set + - description: Address offset and size for vbif register set + + reg-names: + items: + - const: mdp + - const: vbif + + clocks: + items: + - description: Display hf axi clock + - description: Display sf axi clock + - description: Display ahb clock + - description: Display lut clock + - description: Display core clock + - description: Display vsync clock + + clock-names: + items: + - const: bus + - const: nrt_bus + - const: iface + - const: lut + - const: core + - const: vsync + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sc7280.h> + #include <dt-bindings/clock/qcom,gcc-sc7280.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-controller@ae01000 { + compatible = "qcom,sc7280-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", + "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&mdp_opp_table>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&edp_in>; + }; + }; + }; + }; +... diff --git a/dts/Bindings/display/msm/qcom,sc7280-mdss.yaml b/dts/Bindings/display/msm/qcom,sc7280-mdss.yaml new file mode 100644 index 0000000000..2947f27e05 --- /dev/null +++ b/dts/Bindings/display/msm/qcom,sc7280-mdss.yaml @@ -0,0 +1,443 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sc7280-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SC7280 Display MDSS + +maintainers: + - Krishna Manikandan <quic_mkrishn@quicinc.com> + +description: + Device tree bindings for MSM Mobile Display Subsystem (MDSS) that encapsulates + sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree + bindings of MDSS are mentioned for SC7280. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + const: qcom,sc7280-mdss + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display AHB clock from dispcc + - description: Display core clock + + clock-names: + items: + - const: iface + - const: ahb + - const: core + + iommus: + maxItems: 1 + + interconnects: + items: + - description: Interconnect path from mdp0 port to the data bus + - description: Interconnect path from CPU to the reg bus + + interconnect-names: + items: + - const: mdp0-mem + - const: cpu-cfg + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: qcom,sc7280-dpu + + "^displayport-controller@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: qcom,sc7280-dp + + "^dsi@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + items: + - const: qcom,sc7280-dsi-ctrl + - const: qcom,mdss-dsi-ctrl + + "^edp@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: qcom,sc7280-edp + + "^phy@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + enum: + - qcom,sc7280-dsi-phy-7nm + - qcom,sc7280-edp-phy + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sc7280.h> + #include <dt-bindings/clock/qcom,gcc-sc7280.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interconnect/qcom,sc7280.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-subsystem@ae00000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "qcom,sc7280-mdss"; + reg = <0xae00000 0x1000>; + reg-names = "mdss"; + power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>; + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", + "ahb", + "core"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>, + <&gem_noc MASTER_APPSS_PROC &cnoc2 SLAVE_DISPLAY_CFG>; + interconnect-names = "mdp0-mem", + "cpu-cfg"; + + iommus = <&apps_smmu 0x900 0x402>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,sc7280-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", + "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&mdp_opp_table>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf5_out: endpoint { + remote-endpoint = <&edp_in>; + }; + }; + + port@2 { + reg = <2>; + dpu_intf0_out: endpoint { + remote-endpoint = <&dp_in>; + }; + }; + }; + }; + + dsi@ae94000 { + compatible = "qcom,sc7280-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0ae94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi_phy 0>, <&mdss_dsi_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SC7280_CX>; + + phys = <&mdss_dsi_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + + dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + mdss_dsi_phy: phy@ae94400 { + compatible = "qcom,sc7280-dsi-phy-7nm"; + reg = <0x0ae94400 0x200>, + <0x0ae94600 0x280>, + <0x0ae94900 0x280>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + vdds-supply = <&vreg_dsi_supply>; + }; + + edp@aea0000 { + compatible = "qcom,sc7280-edp"; + pinctrl-names = "default"; + pinctrl-0 = <&edp_hot_plug_det>; + + reg = <0xaea0000 0x200>, + <0xaea0200 0x200>, + <0xaea0400 0xc00>, + <0xaea1000 0x400>; + + interrupt-parent = <&mdss>; + interrupts = <14>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_EDP_AUX_CLK>, + <&dispcc DISP_CC_MDSS_EDP_LINK_CLK>, + <&dispcc DISP_CC_MDSS_EDP_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + assigned-clocks = <&dispcc DISP_CC_MDSS_EDP_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK_SRC>; + assigned-clock-parents = <&mdss_edp_phy 0>, <&mdss_edp_phy 1>; + + phys = <&mdss_edp_phy>; + phy-names = "dp"; + + operating-points-v2 = <&edp_opp_table>; + power-domains = <&rpmhpd SC7280_CX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + edp_in: endpoint { + remote-endpoint = <&dpu_intf5_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_edp_out: endpoint { }; + }; + }; + + edp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss_edp_phy: phy@aec2a00 { + compatible = "qcom,sc7280-edp-phy"; + + reg = <0xaec2a00 0x19c>, + <0xaec2200 0xa0>, + <0xaec2600 0xa0>, + <0xaec2000 0x1c0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_EDP_CLKREF_EN>; + clock-names = "aux", + "cfg_ahb"; + + #clock-cells = <1>; + #phy-cells = <0>; + }; + + displayport-controller@ae90000 { + compatible = "qcom,sc7280-dp"; + + reg = <0xae90000 0x200>, + <0xae90200 0x200>, + <0xae90400 0xc00>, + <0xae91000 0x400>, + <0xae91400 0x400>; + + interrupt-parent = <&mdss>; + interrupts = <12>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DP_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>; + assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>; + phys = <&dp_phy>; + phy-names = "dp"; + + operating-points-v2 = <&dp_opp_table>; + power-domains = <&rpmhpd SC7280_CX>; + + #sound-dai-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dp_in: endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + dp_out: endpoint { }; + }; + }; + + dp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + }; +... diff --git a/dts/Bindings/display/msm/qcom,sc8280xp-dpu.yaml b/dts/Bindings/display/msm/qcom,sc8280xp-dpu.yaml new file mode 100644 index 0000000000..d19e3bec46 --- /dev/null +++ b/dts/Bindings/display/msm/qcom,sc8280xp-dpu.yaml @@ -0,0 +1,122 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sc8280xp-dpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SC8280XP Display Processing Unit + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + +description: + Device tree bindings for SC8280XP Display Processing Unit. + +$ref: /schemas/display/msm/dpu-common.yaml# + +properties: + compatible: + const: qcom,sc8280xp-dpu + + reg: + items: + - description: Address offset and size for mdp register set + - description: Address offset and size for vbif register set + + reg-names: + items: + - const: mdp + - const: vbif + + clocks: + items: + - description: Display hf axi clock + - description: Display sf axi clock + - description: Display ahb clock + - description: Display lut clock + - description: Display core clock + - description: Display vsync clock + + clock-names: + items: + - const: bus + - const: nrt_bus + - const: iface + - const: lut + - const: core + - const: vsync + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sc8280xp.h> + #include <dt-bindings/clock/qcom,gcc-sc8280xp.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interconnect/qcom,sc8280xp.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-controller@ae01000 { + compatible = "qcom,sc8280xp-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc0 DISP_CC_MDSS_AHB_CLK>, + <&dispcc0 DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc0 DISP_CC_MDSS_MDP_CLK>, + <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", + "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + assigned-clocks = <&dispcc0 DISP_CC_MDSS_MDP_CLK>, + <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <460000000>, + <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd SC8280XP_MMCX>; + + interrupt-parent = <&mdss0>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&mdss0_dp0_in>; + }; + }; + + port@4 { + reg = <4>; + endpoint { + remote-endpoint = <&mdss0_dp1_in>; + }; + }; + + port@5 { + reg = <5>; + endpoint { + remote-endpoint = <&mdss0_dp3_in>; + }; + }; + + port@6 { + reg = <6>; + endpoint { + remote-endpoint = <&mdss0_dp2_in>; + }; + }; + }; + }; +... diff --git a/dts/Bindings/display/msm/qcom,sc8280xp-mdss.yaml b/dts/Bindings/display/msm/qcom,sc8280xp-mdss.yaml new file mode 100644 index 0000000000..af79406e16 --- /dev/null +++ b/dts/Bindings/display/msm/qcom,sc8280xp-mdss.yaml @@ -0,0 +1,155 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sc8280xp-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SC8280XP Mobile Display Subsystem + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + +description: + Device tree bindings for MSM Mobile Display Subsystem (MDSS) that encapsulates + sub-blocks like DPU display controller, DSI and DP interfaces etc. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + const: qcom,sc8280xp-mdss + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display AHB clock from dispcc + - description: Display core clock + + clock-names: + items: + - const: iface + - const: ahb + - const: core + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: qcom,sc8280xp-dpu + + "^displayport-controller@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + enum: + - qcom,sc8280xp-dp + - qcom,sc8280xp-edp + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sc8280xp.h> + #include <dt-bindings/clock/qcom,gcc-sc8280xp.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interconnect/qcom,sc8280xp.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-subsystem@ae00000 { + compatible = "qcom,sc8280xp-mdss"; + reg = <0x0ae00000 0x1000>; + reg-names = "mdss"; + + power-domains = <&dispcc0 MDSS_GDSC>; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&dispcc0 DISP_CC_MDSS_AHB_CLK>, + <&dispcc0 DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", + "ahb", + "core"; + + resets = <&dispcc0 DISP_CC_MDSS_CORE_BCR>; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>, + <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "mdp0-mem", "mdp1-mem"; + + iommus = <&apps_smmu 0x1000 0x402>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,sc8280xp-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc0 DISP_CC_MDSS_AHB_CLK>, + <&dispcc0 DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc0 DISP_CC_MDSS_MDP_CLK>, + <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", + "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + assigned-clocks = <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdss0_mdp_opp_table>; + power-domains = <&rpmhpd SC8280XP_MMCX>; + + interrupt-parent = <&mdss0>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&mdss0_dp0_in>; + }; + }; + + port@4 { + reg = <4>; + endpoint { + remote-endpoint = <&mdss0_dp1_in>; + }; + }; + + port@5 { + reg = <5>; + endpoint { + remote-endpoint = <&mdss0_dp3_in>; + }; + }; + + port@6 { + reg = <6>; + endpoint { + remote-endpoint = <&mdss0_dp2_in>; + }; + }; + }; + }; + }; +... diff --git a/dts/Bindings/display/msm/qcom,sdm670-mdss.yaml b/dts/Bindings/display/msm/qcom,sdm670-mdss.yaml new file mode 100644 index 0000000000..7dc269322b --- /dev/null +++ b/dts/Bindings/display/msm/qcom,sdm670-mdss.yaml @@ -0,0 +1,292 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sdm670-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SDM670 Display MDSS + +maintainers: + - Richard Acayan <mailingradian@gmail.com> + +description: + SDM670 MSM Mobile Display Subsystem (MDSS), which encapsulates sub-blocks + like DPU display controller, DSI and DP interfaces etc. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + const: qcom,sdm670-mdss + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display core clock + + clock-names: + items: + - const: iface + - const: core + + iommus: + maxItems: 2 + + interconnects: + maxItems: 2 + + interconnect-names: + maxItems: 2 + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: qcom,sdm670-dpu + + "^displayport-controller@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: qcom,sdm670-dp + + "^dsi@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + contains: + const: qcom,sdm670-dsi-ctrl + + "^phy@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: qcom,dsi-phy-10nm + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sdm845.h> + #include <dt-bindings/clock/qcom,gcc-sdm845.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/interconnect/qcom,sdm670-rpmh.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-subsystem@ae00000 { + compatible = "qcom,sdm670-mdss"; + reg = <0x0ae00000 0x1000>; + reg-names = "mdss"; + power-domains = <&dispcc MDSS_GDSC>; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "core"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + interconnects = <&mmss_noc MASTER_MDP_PORT0 0 &mem_noc SLAVE_EBI_CH0 0>, + <&mmss_noc MASTER_MDP_PORT1 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "mdp0-mem", "mdp1-mem"; + + iommus = <&apps_smmu 0x880 0x8>, + <&apps_smmu 0xc80 0x8>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,sdm670-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "gcc-bus", "iface", "bus", "core", "vsync"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + power-domains = <&rpmhpd SDM670_CX>; + operating-points-v2 = <&mdp_opp_table>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&mdss_dsi1_in>; + }; + }; + }; + }; + + dsi@ae94000 { + compatible = "qcom,sdm670-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0ae94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SDM670_CX>; + + phys = <&mdss_dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi0_out: endpoint { + }; + }; + }; + }; + + mdss_dsi0_phy: phy@ae94400 { + compatible = "qcom,dsi-phy-10nm"; + reg = <0x0ae94400 0x200>, + <0x0ae94600 0x280>, + <0x0ae94a00 0x1e0>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + vdds-supply = <&vreg_dsi_phy>; + }; + + dsi@ae96000 { + compatible = "qcom,sdm670-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0ae96000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, + <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK>, + <&dispcc DISP_CC_MDSS_ESC1_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; + assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SDM670_CX>; + + phys = <&dsi1_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi1_in: endpoint { + remote-endpoint = <&dpu_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi1_out: endpoint { + }; + }; + }; + }; + + mdss_dsi1_phy: phy@ae96400 { + compatible = "qcom,dsi-phy-10nm"; + reg = <0x0ae96400 0x200>, + <0x0ae96600 0x280>, + <0x0ae96a00 0x10e>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + vdds-supply = <&vreg_dsi_phy>; + }; + }; +... diff --git a/dts/Bindings/display/msm/qcom,sdm845-dpu.yaml b/dts/Bindings/display/msm/qcom,sdm845-dpu.yaml new file mode 100644 index 0000000000..dc11fd421a --- /dev/null +++ b/dts/Bindings/display/msm/qcom,sdm845-dpu.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sdm845-dpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DPU on SDM845 + +maintainers: + - Krishna Manikandan <quic_mkrishn@quicinc.com> + +$ref: /schemas/display/msm/dpu-common.yaml# + +properties: + compatible: + enum: + - qcom,sdm670-dpu + - qcom,sdm845-dpu + + reg: + items: + - description: Address offset and size for mdp register set + - description: Address offset and size for vbif register set + + reg-names: + items: + - const: mdp + - const: vbif + + clocks: + items: + - description: Display GCC bus clock + - description: Display ahb clock + - description: Display axi clock + - description: Display core clock + - description: Display vsync clock + + clock-names: + items: + - const: gcc-bus + - const: iface + - const: bus + - const: core + - const: vsync + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sdm845.h> + #include <dt-bindings/clock/qcom,gcc-sdm845.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-controller@ae01000 { + compatible = "qcom,sdm845-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "gcc-bus", "iface", "bus", "core", "vsync"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&mdp_opp_table>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + }; +... diff --git a/dts/Bindings/display/msm/qcom,sdm845-mdss.yaml b/dts/Bindings/display/msm/qcom,sdm845-mdss.yaml new file mode 100644 index 0000000000..6e8b69e5ec --- /dev/null +++ b/dts/Bindings/display/msm/qcom,sdm845-mdss.yaml @@ -0,0 +1,288 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sdm845-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SDM845 Display MDSS + +maintainers: + - Krishna Manikandan <quic_mkrishn@quicinc.com> + +description: + Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates + sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree + bindings of MDSS are mentioned for SDM845 target. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + const: qcom,sdm845-mdss + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display core clock + + clock-names: + items: + - const: iface + - const: core + + iommus: + maxItems: 2 + + interconnects: + maxItems: 2 + + interconnect-names: + maxItems: 2 + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: qcom,sdm845-dpu + + "^displayport-controller@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: qcom,sdm845-dp + + "^dsi@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + items: + - const: qcom,sdm845-dsi-ctrl + - const: qcom,mdss-dsi-ctrl + + "^phy@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: qcom,dsi-phy-10nm + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sdm845.h> + #include <dt-bindings/clock/qcom,gcc-sdm845.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-subsystem@ae00000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "qcom,sdm845-mdss"; + reg = <0x0ae00000 0x1000>; + reg-names = "mdss"; + power-domains = <&dispcc MDSS_GDSC>; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "core"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x880 0x8>, + <&apps_smmu 0xc80 0x8>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,sdm845-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "gcc-bus", "iface", "bus", "core", "vsync"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&mdp_opp_table>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + }; + + dsi@ae94000 { + compatible = "qcom,sdm845-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0ae94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SDM845_CX>; + + phys = <&dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + }; + + dsi0_phy: phy@ae94400 { + compatible = "qcom,dsi-phy-10nm"; + reg = <0x0ae94400 0x200>, + <0x0ae94600 0x280>, + <0x0ae94a00 0x1e0>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + vdds-supply = <&vreg_dsi_phy>; + }; + + dsi@ae96000 { + compatible = "qcom,sdm845-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0ae96000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, + <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK>, + <&dispcc DISP_CC_MDSS_ESC1_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; + assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SDM845_CX>; + + phys = <&dsi1_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi1_in: endpoint { + remote-endpoint = <&dpu_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + dsi1_out: endpoint { + }; + }; + }; + }; + + dsi1_phy: phy@ae96400 { + compatible = "qcom,dsi-phy-10nm"; + reg = <0x0ae96400 0x200>, + <0x0ae96600 0x280>, + <0x0ae96a00 0x10e>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + vdds-supply = <&vreg_dsi_phy>; + }; + }; +... diff --git a/dts/Bindings/display/msm/qcom,sm6115-dpu.yaml b/dts/Bindings/display/msm/qcom,sm6115-dpu.yaml new file mode 100644 index 0000000000..510eb6c193 --- /dev/null +++ b/dts/Bindings/display/msm/qcom,sm6115-dpu.yaml @@ -0,0 +1,93 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sm6115-dpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DPU on SM6115 + +maintainers: + - Dmitry Baryshkov <dmitry.baryshkov@linaro.org> + +$ref: /schemas/display/msm/dpu-common.yaml# + +properties: + compatible: + const: qcom,sm6115-dpu + + reg: + items: + - description: MDP register set + - description: VBIF register set + + reg-names: + items: + - const: mdp + - const: vbif + + clocks: + items: + - description: Display AXI + - description: Display AHB + - description: Display core + - description: Display lut + - description: Display rotator + - description: Display vsync + + clock-names: + items: + - const: bus + - const: iface + - const: core + - const: lut + - const: rot + - const: vsync + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,sm6115-dispcc.h> + #include <dt-bindings/clock/qcom,gcc-sm6115.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-controller@5e01000 { + compatible = "qcom,sm6115-dpu"; + reg = <0x05e01000 0x8f000>, + <0x05eb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_ROT_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", "iface", "core", "lut", "rot", "vsync"; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmpd SM6115_VDDCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + }; + }; +... diff --git a/dts/Bindings/display/msm/qcom,sm6115-mdss.yaml b/dts/Bindings/display/msm/qcom,sm6115-mdss.yaml new file mode 100644 index 0000000000..309de1953c --- /dev/null +++ b/dts/Bindings/display/msm/qcom,sm6115-mdss.yaml @@ -0,0 +1,203 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sm6115-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM6115 Display MDSS + +maintainers: + - Dmitry Baryshkov <dmitry.baryshkov@linaro.org> + +description: + Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates + sub-blocks like DPU display controller and DSI. Device tree bindings of MDSS + are mentioned for SM6115 target. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + const: qcom,sm6115-mdss + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display AXI clock + - description: Display core clock + + iommus: + maxItems: 2 + + interconnects: + items: + - description: Interconnect path from mdp0 port to the data bus + - description: Interconnect path from CPU to the reg bus + + interconnect-names: + items: + - const: mdp0-mem + - const: cpu-cfg + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: qcom,sm6115-dpu + + "^dsi@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + oneOf: + - items: + - const: qcom,sm6115-dsi-ctrl + - const: qcom,mdss-dsi-ctrl + - description: Old binding, please don't use + deprecated: true + const: qcom,dsi-ctrl-6g-qcm2290 + + "^phy@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: qcom,dsi-phy-14nm-2290 + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,sm6115-dispcc.h> + #include <dt-bindings/clock/qcom,gcc-sm6115.h> + #include <dt-bindings/clock/qcom,rpmcc.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-subsystem@5e00000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "qcom,sm6115-mdss"; + reg = <0x05e00000 0x1000>; + reg-names = "mdss"; + power-domains = <&dispcc MDSS_GDSC>; + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x420 0x2>, + <&apps_smmu 0x421 0x0>; + ranges; + + display-controller@5e01000 { + compatible = "qcom,sm6115-dpu"; + reg = <0x05e01000 0x8f000>, + <0x05eb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_ROT_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", "iface", "core", "lut", "rot", "vsync"; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmpd SM6115_VDDCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + }; + }; + + dsi@5e94000 { + compatible = "qcom,sm6115-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x05e94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmpd SM6115_VDDCX>; + phys = <&dsi0_phy>; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + }; + + dsi0_phy: phy@5e94400 { + compatible = "qcom,dsi-phy-14nm-2290"; + reg = <0x05e94400 0x100>, + <0x05e94500 0x300>, + <0x05e94800 0x188>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "ref"; + }; + }; +... diff --git a/dts/Bindings/display/msm/qcom,sm6125-mdss.yaml b/dts/Bindings/display/msm/qcom,sm6125-mdss.yaml new file mode 100644 index 0000000000..3deb9dc81c --- /dev/null +++ b/dts/Bindings/display/msm/qcom,sm6125-mdss.yaml @@ -0,0 +1,223 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sm6125-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM6125 Display MDSS + +maintainers: + - Marijn Suijten <marijn.suijten@somainline.org> + +description: + SM6125 MSM Mobile Display Subsystem (MDSS), which encapsulates sub-blocks + like DPU display controller, DSI and DP interfaces etc. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + const: qcom,sm6125-mdss + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display AHB clock + - description: Display core clock + + clock-names: + items: + - const: iface + - const: ahb + - const: core + + iommus: + maxItems: 1 + + interconnects: + items: + - description: Interconnect path from mdp0 port to the data bus + - description: Interconnect path from CPU to the reg bus + + interconnect-names: + items: + - const: mdp0-mem + - const: cpu-cfg + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: qcom,sm6125-dpu + + "^dsi@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + items: + - const: qcom,sm6125-dsi-ctrl + - const: qcom,mdss-dsi-ctrl + + "^phy@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: qcom,sm6125-dsi-phy-14nm + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sm6125.h> + #include <dt-bindings/clock/qcom,gcc-sm6125.h> + #include <dt-bindings/clock/qcom,rpmcc.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-subsystem@5e00000 { + compatible = "qcom,sm6125-mdss"; + reg = <0x05e00000 0x1000>; + reg-names = "mdss"; + + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", + "ahb", + "core"; + + power-domains = <&dispcc MDSS_GDSC>; + + iommus = <&apps_smmu 0x400 0x0>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + display-controller@5e01000 { + compatible = "qcom,sm6125-dpu"; + reg = <0x05e01000 0x83208>, + <0x05eb0000 0x2008>; + reg-names = "mdp", "vbif"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_ROT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>, + <&gcc GCC_DISP_THROTTLE_CORE_CLK>; + clock-names = "bus", + "iface", + "rot", + "lut", + "core", + "vsync", + "throttle"; + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmpd SM6125_VDDCX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + }; + }; + + dsi@5e94000 { + compatible = "qcom,sm6125-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x05e94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmpd SM6125_VDDCX>; + + phys = <&mdss_dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi0_out: endpoint { + }; + }; + }; + }; + + phy@5e94400 { + compatible = "qcom,sm6125-dsi-phy-14nm"; + reg = <0x05e94400 0x100>, + <0x05e94500 0x300>, + <0x05e94800 0x188>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", + "ref"; + + required-opps = <&rpmpd_opp_nom>; + power-domains = <&rpmpd SM6125_VDDMX>; + }; + }; +... diff --git a/dts/Bindings/display/msm/qcom,sm6350-mdss.yaml b/dts/Bindings/display/msm/qcom,sm6350-mdss.yaml new file mode 100644 index 0000000000..c9ba1fae80 --- /dev/null +++ b/dts/Bindings/display/msm/qcom,sm6350-mdss.yaml @@ -0,0 +1,216 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sm6350-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM6350 Display MDSS + +maintainers: + - Krishna Manikandan <quic_mkrishn@quicinc.com> + +description: + SM6350 MSM Mobile Display Subsystem (MDSS), which encapsulates sub-blocks + like DPU display controller, DSI and DP interfaces etc. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + const: qcom,sm6350-mdss + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display AXI clock from gcc + - description: Display core clock + + clock-names: + items: + - const: iface + - const: bus + - const: core + + iommus: + maxItems: 1 + + interconnects: + items: + - description: Interconnect path from mdp0 port to the data bus + - description: Interconnect path from CPU to the reg bus + + interconnect-names: + items: + - const: mdp0-mem + - const: cpu-cfg + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: qcom,sm6350-dpu + + "^dsi@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + items: + - const: qcom,sm6350-dsi-ctrl + - const: qcom,mdss-dsi-ctrl + + "^phy@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: qcom,dsi-phy-10nm + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sm6350.h> + #include <dt-bindings/clock/qcom,gcc-sm6350.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-subsystem@ae00000 { + compatible = "qcom,sm6350-mdss"; + reg = <0x0ae00000 0x1000>; + reg-names = "mdss"; + + power-domains = <&dispcc MDSS_GDSC>; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&gcc GCC_DISP_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "bus", "core"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x800 0x2>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,sm6350-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_ROT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", "iface", "rot", "lut", "core", + "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>, + <&dispcc DISP_CC_MDSS_ROT_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>; + assigned-clock-rates = <300000000>, + <19200000>, + <19200000>, + <19200000>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd SM6350_CX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + }; + }; + + dsi@ae94000 { + compatible = "qcom,sm6350-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0ae94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SM6350_MX>; + + phys = <&dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + }; + + dsi0_phy: phy@ae94400 { + compatible = "qcom,dsi-phy-10nm"; + reg = <0x0ae94400 0x200>, + <0x0ae94600 0x280>, + <0x0ae94a00 0x1e0>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + }; + }; +... diff --git a/dts/Bindings/display/msm/qcom,sm6375-mdss.yaml b/dts/Bindings/display/msm/qcom,sm6375-mdss.yaml new file mode 100644 index 0000000000..8e8a288d31 --- /dev/null +++ b/dts/Bindings/display/msm/qcom,sm6375-mdss.yaml @@ -0,0 +1,218 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sm6375-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM6375 Display MDSS + +maintainers: + - Konrad Dybcio <konrad.dybcio@linaro.org> + +description: + SM6375 MSM Mobile Display Subsystem (MDSS), which encapsulates sub-blocks + like DPU display controller, DSI and DP interfaces etc. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + const: qcom,sm6375-mdss + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display AHB clock + - description: Display core clock + + clock-names: + items: + - const: iface + - const: ahb + - const: core + + iommus: + maxItems: 1 + + interconnects: + items: + - description: Interconnect path from mdp0 port to the data bus + - description: Interconnect path from CPU to the reg bus + + interconnect-names: + items: + - const: mdp0-mem + - const: cpu-cfg + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: qcom,sm6375-dpu + + "^dsi@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + items: + - const: qcom,sm6375-dsi-ctrl + - const: qcom,mdss-dsi-ctrl + + "^phy@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: qcom,sm6375-dsi-phy-7nm + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmcc.h> + #include <dt-bindings/clock/qcom,sm6375-gcc.h> + #include <dt-bindings/clock/qcom,sm6375-dispcc.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-subsystem@5e00000 { + compatible = "qcom,sm6375-mdss"; + reg = <0x05e00000 0x1000>; + reg-names = "mdss"; + + power-domains = <&dispcc MDSS_GDSC>; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "ahb", "core"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x820 0x2>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + display-controller@5e01000 { + compatible = "qcom,sm6375-dpu"; + reg = <0x05e01000 0x8e030>, + <0x05eb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_ROT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>, + <&gcc GCC_DISP_THROTTLE_CORE_CLK>; + clock-names = "bus", + "iface", + "rot", + "lut", + "core", + "vsync", + "throttle"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmpd SM6375_VDDCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + }; + }; + + dsi@5e94000 { + compatible = "qcom,sm6375-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x05e94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmpd SM6375_VDDMX>; + + phys = <&mdss_dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + }; + + mdss_dsi0_phy: phy@5e94400 { + compatible = "qcom,sm6375-dsi-phy-7nm"; + reg = <0x05e94400 0x200>, + <0x05e94600 0x280>, + <0x05e94900 0x264>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "ref"; + }; + }; +... diff --git a/dts/Bindings/display/msm/qcom,sm8150-dpu.yaml b/dts/Bindings/display/msm/qcom,sm8150-dpu.yaml new file mode 100644 index 0000000000..13146b3f05 --- /dev/null +++ b/dts/Bindings/display/msm/qcom,sm8150-dpu.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sm8150-dpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8150 Display DPU + +maintainers: + - Dmitry Baryshkov <dmitry.baryshkov@linaro.org> + +$ref: /schemas/display/msm/dpu-common.yaml# + +properties: + compatible: + const: qcom,sm8150-dpu + + reg: + items: + - description: Address offset and size for mdp register set + - description: Address offset and size for vbif register set + + reg-names: + items: + - const: mdp + - const: vbif + + clocks: + items: + - description: Display ahb clock + - description: Display hf axi clock + - description: Display core clock + - description: Display vsync clock + + clock-names: + items: + - const: iface + - const: bus + - const: core + - const: vsync + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sm8150.h> + #include <dt-bindings/clock/qcom,gcc-sm8150.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interconnect/qcom,sm8150.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-controller@ae01000 { + compatible = "qcom,sm8150-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "iface", "bus", "core", "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd SM8150_MMCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + }; +... diff --git a/dts/Bindings/display/msm/qcom,sm8150-mdss.yaml b/dts/Bindings/display/msm/qcom,sm8150-mdss.yaml new file mode 100644 index 0000000000..c0d6a4fdff --- /dev/null +++ b/dts/Bindings/display/msm/qcom,sm8150-mdss.yaml @@ -0,0 +1,338 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sm8150-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8150 Display MDSS + +maintainers: + - Dmitry Baryshkov <dmitry.baryshkov@linaro.org> + +description: + Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates + sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree + bindings of MDSS are mentioned for SM8150 target. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + items: + - const: qcom,sm8150-mdss + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display hf axi clock + - description: Display sf axi clock + - description: Display core clock + + clock-names: + items: + - const: iface + - const: bus + - const: nrt_bus + - const: core + + iommus: + maxItems: 1 + + interconnects: + maxItems: 2 + + interconnect-names: + maxItems: 2 + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: qcom,sm8150-dpu + + "^dsi@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + items: + - const: qcom,sm8150-dsi-ctrl + - const: qcom,mdss-dsi-ctrl + + "^phy@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: qcom,dsi-phy-7nm-8150 + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sm8150.h> + #include <dt-bindings/clock/qcom,gcc-sm8150.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interconnect/qcom,sm8150.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-subsystem@ae00000 { + compatible = "qcom,sm8150-mdss"; + reg = <0x0ae00000 0x1000>; + reg-names = "mdss"; + + interconnects = <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>, + <&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>; + interconnect-names = "mdp0-mem", "mdp1-mem"; + + power-domains = <&dispcc MDSS_GDSC>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "bus", "nrt_bus", "core"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x800 0x420>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,sm8150-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "iface", "bus", "core", "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd SM8150_MMCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-171428571 { + opp-hz = /bits/ 64 <171428571>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-345000000 { + opp-hz = /bits/ 64 <345000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-460000000 { + opp-hz = /bits/ 64 <460000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + dsi@ae94000 { + compatible = "qcom,sm8150-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0ae94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SM8150_MMCX>; + + phys = <&dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + + dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + dsi0_phy: phy@ae94400 { + compatible = "qcom,dsi-phy-7nm-8150"; + reg = <0x0ae94400 0x200>, + <0x0ae94600 0x280>, + <0x0ae94900 0x260>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + vdds-supply = <&vreg_dsi_phy>; + }; + + dsi@ae96000 { + compatible = "qcom,sm8150-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0ae96000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, + <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK>, + <&dispcc DISP_CC_MDSS_ESC1_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; + assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SM8150_MMCX>; + + phys = <&dsi1_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi1_in: endpoint { + remote-endpoint = <&dpu_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + dsi1_out: endpoint { + }; + }; + }; + }; + + dsi1_phy: phy@ae96400 { + compatible = "qcom,dsi-phy-7nm-8150"; + reg = <0x0ae96400 0x200>, + <0x0ae96600 0x280>, + <0x0ae96900 0x260>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + vdds-supply = <&vreg_dsi_phy>; + }; + }; +... diff --git a/dts/Bindings/display/msm/qcom,sm8250-dpu.yaml b/dts/Bindings/display/msm/qcom,sm8250-dpu.yaml new file mode 100644 index 0000000000..ffa5047e90 --- /dev/null +++ b/dts/Bindings/display/msm/qcom,sm8250-dpu.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sm8250-dpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8250 Display DPU + +maintainers: + - Dmitry Baryshkov <dmitry.baryshkov@linaro.org> + +$ref: /schemas/display/msm/dpu-common.yaml# + +properties: + compatible: + const: qcom,sm8250-dpu + + reg: + items: + - description: Address offset and size for mdp register set + - description: Address offset and size for vbif register set + + reg-names: + items: + - const: mdp + - const: vbif + + clocks: + items: + - description: Display ahb clock + - description: Display hf axi clock + - description: Display core clock + - description: Display vsync clock + + clock-names: + items: + - const: iface + - const: bus + - const: core + - const: vsync + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sm8250.h> + #include <dt-bindings/clock/qcom,gcc-sm8250.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interconnect/qcom,sm8250.h> + #include <dt-bindings/power/qcom,rpmhpd.h> + + display-controller@ae01000 { + compatible = "qcom,sm8250-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "iface", "bus", "core", "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + }; +... diff --git a/dts/Bindings/display/msm/qcom,sm8250-mdss.yaml b/dts/Bindings/display/msm/qcom,sm8250-mdss.yaml new file mode 100644 index 0000000000..51368cda7b --- /dev/null +++ b/dts/Bindings/display/msm/qcom,sm8250-mdss.yaml @@ -0,0 +1,350 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sm8250-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8250 Display MDSS + +maintainers: + - Dmitry Baryshkov <dmitry.baryshkov@linaro.org> + +description: + Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates + sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree + bindings of MDSS are mentioned for SM8250 target. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + const: qcom,sm8250-mdss + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display hf axi clock + - description: Display sf axi clock + - description: Display core clock + + clock-names: + items: + - const: iface + - const: bus + - const: nrt_bus + - const: core + + iommus: + maxItems: 1 + + interconnects: + maxItems: 2 + + interconnect-names: + maxItems: 2 + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: qcom,sm8250-dpu + + "^displayport-controller@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + items: + - const: qcom,sm8250-dp + - const: qcom,sm8350-dp + + "^dsi@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + items: + - const: qcom,sm8250-dsi-ctrl + - const: qcom,mdss-dsi-ctrl + + "^phy@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: qcom,dsi-phy-7nm + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sm8250.h> + #include <dt-bindings/clock/qcom,gcc-sm8250.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interconnect/qcom,sm8250.h> + #include <dt-bindings/power/qcom,rpmhpd.h> + + display-subsystem@ae00000 { + compatible = "qcom,sm8250-mdss"; + reg = <0x0ae00000 0x1000>; + reg-names = "mdss"; + + interconnects = <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>, + <&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>; + interconnect-names = "mdp0-mem", "mdp1-mem"; + + power-domains = <&dispcc MDSS_GDSC>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "bus", "nrt_bus", "core"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x820 0x402>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,sm8250-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "iface", "bus", "core", "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-345000000 { + opp-hz = /bits/ 64 <345000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-460000000 { + opp-hz = /bits/ 64 <460000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + dsi@ae94000 { + compatible = "qcom,sm8250-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0ae94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + + phys = <&dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + + dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + dsi0_phy: phy@ae94400 { + compatible = "qcom,dsi-phy-7nm"; + reg = <0x0ae94400 0x200>, + <0x0ae94600 0x280>, + <0x0ae94900 0x260>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + vdds-supply = <&vreg_dsi_phy>; + }; + + dsi@ae96000 { + compatible = "qcom,sm8250-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0ae96000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, + <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK>, + <&dispcc DISP_CC_MDSS_ESC1_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; + assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + + phys = <&dsi1_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi1_in: endpoint { + remote-endpoint = <&dpu_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + dsi1_out: endpoint { + }; + }; + }; + }; + + dsi1_phy: phy@ae96400 { + compatible = "qcom,dsi-phy-7nm"; + reg = <0x0ae96400 0x200>, + <0x0ae96600 0x280>, + <0x0ae96900 0x260>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + vdds-supply = <&vreg_dsi_phy>; + }; + }; +... diff --git a/dts/Bindings/display/msm/qcom,sm8350-dpu.yaml b/dts/Bindings/display/msm/qcom,sm8350-dpu.yaml new file mode 100644 index 0000000000..96ef2d9c35 --- /dev/null +++ b/dts/Bindings/display/msm/qcom,sm8350-dpu.yaml @@ -0,0 +1,120 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sm8350-dpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8350 Display DPU + +maintainers: + - Robert Foss <robert.foss@linaro.org> + +$ref: /schemas/display/msm/dpu-common.yaml# + +properties: + compatible: + const: qcom,sm8350-dpu + + reg: + items: + - description: Address offset and size for mdp register set + - description: Address offset and size for vbif register set + + reg-names: + items: + - const: mdp + - const: vbif + + clocks: + items: + - description: Display hf axi clock + - description: Display sf axi clock + - description: Display ahb clock + - description: Display lut clock + - description: Display core clock + - description: Display vsync clock + + clock-names: + items: + - const: bus + - const: nrt_bus + - const: iface + - const: lut + - const: core + - const: vsync + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sm8350.h> + #include <dt-bindings/clock/qcom,gcc-sm8350.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interconnect/qcom,sm8350.h> + #include <dt-bindings/power/qcom,rpmhpd.h> + + display-controller@ae01000 { + compatible = "qcom,sm8350-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", + "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-345000000 { + opp-hz = /bits/ 64 <345000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-460000000 { + opp-hz = /bits/ 64 <460000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; +... diff --git a/dts/Bindings/display/msm/qcom,sm8350-mdss.yaml b/dts/Bindings/display/msm/qcom,sm8350-mdss.yaml new file mode 100644 index 0000000000..163fc83c1e --- /dev/null +++ b/dts/Bindings/display/msm/qcom,sm8350-mdss.yaml @@ -0,0 +1,237 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sm8350-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8350 Display MDSS + +maintainers: + - Robert Foss <robert.foss@linaro.org> + +description: + MSM Mobile Display Subsystem(MDSS) that encapsulates sub-blocks like + DPU display controller, DSI and DP interfaces etc. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + items: + - const: qcom,sm8350-mdss + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display hf axi clock + - description: Display sf axi clock + - description: Display core clock + + clock-names: + items: + - const: iface + - const: bus + - const: nrt_bus + - const: core + + iommus: + maxItems: 1 + + interconnects: + maxItems: 2 + + interconnect-names: + items: + - const: mdp0-mem + - const: mdp1-mem + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: qcom,sm8350-dpu + + "^displayport-controller@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: qcom,sm8350-dp + + "^dsi@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + items: + - const: qcom,sm8350-dsi-ctrl + - const: qcom,mdss-dsi-ctrl + + "^phy@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: qcom,sm8350-dsi-phy-5nm + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sm8350.h> + #include <dt-bindings/clock/qcom,gcc-sm8350.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interconnect/qcom,sm8350.h> + #include <dt-bindings/power/qcom,rpmhpd.h> + + display-subsystem@ae00000 { + compatible = "qcom,sm8350-mdss"; + reg = <0x0ae00000 0x1000>; + reg-names = "mdss"; + + interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>, + <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "mdp0-mem", "mdp1-mem"; + + power-domains = <&dispcc MDSS_GDSC>; + resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "bus", "nrt_bus", "core"; + + iommus = <&apps_smmu 0x820 0x402>; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,sm8350-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", + "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-345000000 { + opp-hz = /bits/ 64 <345000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-460000000 { + opp-hz = /bits/ 64 <460000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + dsi0: dsi@ae94000 { + compatible = "qcom,sm8350-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0ae94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + + phys = <&mdss_dsi0_phy>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + }; + }; +... diff --git a/dts/Bindings/display/msm/qcom,sm8450-dpu.yaml b/dts/Bindings/display/msm/qcom,sm8450-dpu.yaml new file mode 100644 index 0000000000..2a5d3daed0 --- /dev/null +++ b/dts/Bindings/display/msm/qcom,sm8450-dpu.yaml @@ -0,0 +1,139 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sm8450-dpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8450 Display DPU + +maintainers: + - Dmitry Baryshkov <dmitry.baryshkov@linaro.org> + +$ref: /schemas/display/msm/dpu-common.yaml# + +properties: + compatible: + const: qcom,sm8450-dpu + + reg: + items: + - description: Address offset and size for mdp register set + - description: Address offset and size for vbif register set + + reg-names: + items: + - const: mdp + - const: vbif + + clocks: + items: + - description: Display hf axi + - description: Display sf axi + - description: Display ahb + - description: Display lut + - description: Display core + - description: Display vsync + + clock-names: + items: + - const: bus + - const: nrt_bus + - const: iface + - const: lut + - const: core + - const: vsync + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,sm8450-dispcc.h> + #include <dt-bindings/clock/qcom,gcc-sm8450.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interconnect/qcom,sm8450.h> + #include <dt-bindings/power/qcom,rpmhpd.h> + + display-controller@ae01000 { + compatible = "qcom,sm8450-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", + "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-172000000{ + opp-hz = /bits/ 64 <172000000>; + required-opps = <&rpmhpd_opp_low_svs_d1>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-325000000 { + opp-hz = /bits/ 64 <325000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-375000000 { + opp-hz = /bits/ 64 <375000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; +... diff --git a/dts/Bindings/display/msm/qcom,sm8450-mdss.yaml b/dts/Bindings/display/msm/qcom,sm8450-mdss.yaml new file mode 100644 index 0000000000..747a2e9665 --- /dev/null +++ b/dts/Bindings/display/msm/qcom,sm8450-mdss.yaml @@ -0,0 +1,364 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sm8450-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8450 Display MDSS + +maintainers: + - Dmitry Baryshkov <dmitry.baryshkov@linaro.org> + +description: + SM8450 MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like + DPU display controller, DSI and DP interfaces etc. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + const: qcom,sm8450-mdss + + clocks: + items: + - description: Display AHB + - description: Display hf AXI + - description: Display sf AXI + - description: Display core + + iommus: + maxItems: 1 + + interconnects: + maxItems: 3 + + interconnect-names: + maxItems: 3 + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: qcom,sm8450-dpu + + "^displayport-controller@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + items: + - const: qcom,sm8450-dp + - const: qcom,sm8350-dp + + "^dsi@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + items: + - const: qcom,sm8450-dsi-ctrl + - const: qcom,mdss-dsi-ctrl + + "^phy@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: qcom,sm8450-dsi-phy-5nm + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,sm8450-dispcc.h> + #include <dt-bindings/clock/qcom,gcc-sm8450.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interconnect/qcom,sm8450.h> + #include <dt-bindings/power/qcom,rpmhpd.h> + + display-subsystem@ae00000 { + compatible = "qcom,sm8450-mdss"; + reg = <0x0ae00000 0x1000>; + reg-names = "mdss"; + + interconnects = <&mmss_noc MASTER_MDP_DISP &mc_virt SLAVE_EBI1_DISP>, + <&mmss_noc MASTER_MDP_DISP &mc_virt SLAVE_EBI1_DISP>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_DISPLAY_CFG>; + interconnect-names = "mdp0-mem", + "mdp1-mem", + "cpu-cfg"; + + resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; + + power-domains = <&dispcc MDSS_GDSC>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "bus", "nrt_bus", "core"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x2800 0x402>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,sm8450-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", + "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-172000000{ + opp-hz = /bits/ 64 <172000000>; + required-opps = <&rpmhpd_opp_low_svs_d1>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-325000000 { + opp-hz = /bits/ 64 <325000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-375000000 { + opp-hz = /bits/ 64 <375000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + dsi@ae94000 { + compatible = "qcom,sm8450-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0ae94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + + phys = <&dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + + dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160310000{ + opp-hz = /bits/ 64 <160310000>; + required-opps = <&rpmhpd_opp_low_svs_d1>; + }; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + dsi0_phy: phy@ae94400 { + compatible = "qcom,sm8450-dsi-phy-5nm"; + reg = <0x0ae94400 0x200>, + <0x0ae94600 0x280>, + <0x0ae94900 0x260>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + vdds-supply = <&vreg_dsi_phy>; + }; + + dsi@ae96000 { + compatible = "qcom,sm8450-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0ae96000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, + <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK>, + <&dispcc DISP_CC_MDSS_ESC1_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; + assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + + phys = <&dsi1_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi1_in: endpoint { + remote-endpoint = <&dpu_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + dsi1_out: endpoint { + }; + }; + }; + }; + + dsi1_phy: phy@ae96400 { + compatible = "qcom,sm8450-dsi-phy-5nm"; + reg = <0x0ae96400 0x200>, + <0x0ae96600 0x280>, + <0x0ae96900 0x260>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + vdds-supply = <&vreg_dsi_phy>; + }; + }; +... diff --git a/dts/Bindings/display/msm/qcom,sm8550-dpu.yaml b/dts/Bindings/display/msm/qcom,sm8550-dpu.yaml new file mode 100644 index 0000000000..16a541fca6 --- /dev/null +++ b/dts/Bindings/display/msm/qcom,sm8550-dpu.yaml @@ -0,0 +1,133 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sm8550-dpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8550 Display DPU + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +$ref: /schemas/display/msm/dpu-common.yaml# + +properties: + compatible: + const: qcom,sm8550-dpu + + reg: + items: + - description: Address offset and size for mdp register set + - description: Address offset and size for vbif register set + + reg-names: + items: + - const: mdp + - const: vbif + + clocks: + items: + - description: Display AHB + - description: Display hf axi + - description: Display MDSS ahb + - description: Display lut + - description: Display core + - description: Display vsync + + clock-names: + items: + - const: bus + - const: nrt_bus + - const: iface + - const: lut + - const: core + - const: vsync + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,sm8550-dispcc.h> + #include <dt-bindings/clock/qcom,sm8550-gcc.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/qcom,rpmhpd.h> + + display-controller@ae01000 { + compatible = "qcom,sm8550-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", + "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-325000000 { + opp-hz = /bits/ 64 <325000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-375000000 { + opp-hz = /bits/ 64 <375000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-514000000 { + opp-hz = /bits/ 64 <514000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; +... diff --git a/dts/Bindings/display/msm/qcom,sm8550-mdss.yaml b/dts/Bindings/display/msm/qcom,sm8550-mdss.yaml new file mode 100644 index 0000000000..1ea50a2c7c --- /dev/null +++ b/dts/Bindings/display/msm/qcom,sm8550-mdss.yaml @@ -0,0 +1,349 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sm8550-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8550 Display MDSS + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +description: + SM8550 MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like + DPU display controller, DSI and DP interfaces etc. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + const: qcom,sm8550-mdss + + clocks: + items: + - description: Display MDSS AHB + - description: Display AHB + - description: Display hf AXI + - description: Display core + + iommus: + maxItems: 1 + + interconnects: + maxItems: 2 + + interconnect-names: + maxItems: 2 + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: qcom,sm8550-dpu + + "^displayport-controller@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + items: + - const: qcom,sm8550-dp + - const: qcom,sm8350-dp + + "^dsi@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + items: + - const: qcom,sm8550-dsi-ctrl + - const: qcom,mdss-dsi-ctrl + + "^phy@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: qcom,sm8550-dsi-phy-4nm + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,sm8550-dispcc.h> + #include <dt-bindings/clock/qcom,sm8550-gcc.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interconnect/qcom,sm8550-rpmh.h> + #include <dt-bindings/power/qcom,rpmhpd.h> + + display-subsystem@ae00000 { + compatible = "qcom,sm8550-mdss"; + reg = <0x0ae00000 0x1000>; + reg-names = "mdss"; + + interconnects = <&mmss_noc MASTER_MDP 0 &gem_noc SLAVE_LLCC 0>, + <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "mdp0-mem", "mdp1-mem"; + + resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; + + power-domains = <&dispcc MDSS_GDSC>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "bus", "nrt_bus", "core"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x1c00 0x2>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,sm8550-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", + "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-325000000 { + opp-hz = /bits/ 64 <325000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-375000000 { + opp-hz = /bits/ 64 <375000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-514000000 { + opp-hz = /bits/ 64 <514000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + dsi@ae94000 { + compatible = "qcom,sm8550-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0ae94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + + phys = <&dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + + dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + dsi0_phy: phy@ae94400 { + compatible = "qcom,sm8550-dsi-phy-4nm"; + reg = <0x0ae95000 0x200>, + <0x0ae95200 0x280>, + <0x0ae95500 0x400>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + }; + + dsi@ae96000 { + compatible = "qcom,sm8550-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0ae96000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, + <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK>, + <&dispcc DISP_CC_MDSS_ESC1_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; + assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + + phys = <&dsi1_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi1_in: endpoint { + remote-endpoint = <&dpu_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + dsi1_out: endpoint { + }; + }; + }; + }; + + dsi1_phy: phy@ae96400 { + compatible = "qcom,sm8550-dsi-phy-4nm"; + reg = <0x0ae97000 0x200>, + <0x0ae97200 0x280>, + <0x0ae97500 0x400>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + }; + }; +... diff --git a/dts/Bindings/display/msm/qcom,sm8650-dpu.yaml b/dts/Bindings/display/msm/qcom,sm8650-dpu.yaml new file mode 100644 index 0000000000..a01d15a033 --- /dev/null +++ b/dts/Bindings/display/msm/qcom,sm8650-dpu.yaml @@ -0,0 +1,127 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sm8650-dpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8650 Display DPU + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +$ref: /schemas/display/msm/dpu-common.yaml# + +properties: + compatible: + const: qcom,sm8650-dpu + + reg: + items: + - description: Address offset and size for mdp register set + - description: Address offset and size for vbif register set + + reg-names: + items: + - const: mdp + - const: vbif + + clocks: + items: + - description: Display hf axi + - description: Display MDSS ahb + - description: Display lut + - description: Display core + - description: Display vsync + + clock-names: + items: + - const: nrt_bus + - const: iface + - const: lut + - const: core + - const: vsync + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/qcom,rpmhpd.h> + + display-controller@ae01000 { + compatible = "qcom,sm8650-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc_axi_clk>, + <&dispcc_ahb_clk>, + <&dispcc_mdp_lut_clk>, + <&dispcc_mdp_clk>, + <&dispcc_vsync_clk>; + clock-names = "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + assigned-clocks = <&dispcc_vsync_clk>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-325000000 { + opp-hz = /bits/ 64 <325000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-375000000 { + opp-hz = /bits/ 64 <375000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-514000000 { + opp-hz = /bits/ 64 <514000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; +... diff --git a/dts/Bindings/display/msm/qcom,sm8650-mdss.yaml b/dts/Bindings/display/msm/qcom,sm8650-mdss.yaml new file mode 100644 index 0000000000..bd11119dc9 --- /dev/null +++ b/dts/Bindings/display/msm/qcom,sm8650-mdss.yaml @@ -0,0 +1,328 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sm8650-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8650 Display MDSS + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +description: + SM8650 MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like + DPU display controller, DSI and DP interfaces etc. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + const: qcom,sm8650-mdss + + clocks: + items: + - description: Display AHB + - description: Display hf AXI + - description: Display core + + iommus: + maxItems: 1 + + interconnects: + maxItems: 2 + + interconnect-names: + maxItems: 2 + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sm8650-dpu + + "^displayport-controller@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sm8650-dp + + "^dsi@[0-9a-f]+$": + type: object + properties: + compatible: + items: + - const: qcom,sm8650-dsi-ctrl + - const: qcom,mdss-dsi-ctrl + + "^phy@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sm8650-dsi-phy-4nm + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/qcom,rpmhpd.h> + + display-subsystem@ae00000 { + compatible = "qcom,sm8650-mdss"; + reg = <0x0ae00000 0x1000>; + reg-names = "mdss"; + + resets = <&dispcc_core_bcr>; + + power-domains = <&dispcc_gdsc>; + + clocks = <&gcc_ahb_clk>, + <&gcc_axi_clk>, + <&dispcc_mdp_clk>; + clock-names = "bus", "nrt_bus", "core"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x1c00 0x2>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,sm8650-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc_axi_clk>, + <&dispcc_ahb_clk>, + <&dispcc_mdp_lut_clk>, + <&dispcc_mdp_clk>, + <&dispcc_mdp_vsync_clk>; + clock-names = "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + assigned-clocks = <&dispcc_mdp_vsync_clk>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-325000000 { + opp-hz = /bits/ 64 <325000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-375000000 { + opp-hz = /bits/ 64 <375000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-514000000 { + opp-hz = /bits/ 64 <514000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + dsi@ae94000 { + compatible = "qcom,sm8650-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0ae94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispc_byte_clk>, + <&dispcc_intf_clk>, + <&dispcc_pclk>, + <&dispcc_esc_clk>, + <&dispcc_ahb_clk>, + <&gcc_bus_clk>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc_byte_clk>, + <&dispcc_pclk>; + assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + + phys = <&dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + + dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + dsi0_phy: phy@ae94400 { + compatible = "qcom,sm8650-dsi-phy-4nm"; + reg = <0x0ae95000 0x200>, + <0x0ae95200 0x280>, + <0x0ae95500 0x400>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc_iface_clk>, + <&rpmhcc_ref_clk>; + clock-names = "iface", "ref"; + }; + + dsi@ae96000 { + compatible = "qcom,sm8650-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0ae96000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5>; + + clocks = <&dispc_byte_clk>, + <&dispcc_intf_clk>, + <&dispcc_pclk>, + <&dispcc_esc_clk>, + <&dispcc_ahb_clk>, + <&gcc_bus_clk>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc_byte_clk>, + <&dispcc_pclk>; + assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + + phys = <&dsi1_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi1_in: endpoint { + remote-endpoint = <&dpu_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + dsi1_out: endpoint { + }; + }; + }; + }; + + dsi1_phy: phy@ae96400 { + compatible = "qcom,sm8650-dsi-phy-4nm"; + reg = <0x0ae97000 0x200>, + <0x0ae97200 0x280>, + <0x0ae97500 0x400>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc_iface_clk>, + <&rpmhcc_ref_clk>; + clock-names = "iface", "ref"; + }; + }; +... diff --git a/dts/Bindings/display/mxsfb.txt b/dts/Bindings/display/mxsfb.txt deleted file mode 100644 index c985871c46..0000000000 --- a/dts/Bindings/display/mxsfb.txt +++ /dev/null @@ -1,87 +0,0 @@ -* Freescale MXS LCD Interface (LCDIF) - -New bindings: -============= -Required properties: -- compatible: Should be "fsl,imx23-lcdif" for i.MX23. - Should be "fsl,imx28-lcdif" for i.MX28. - Should be "fsl,imx6sx-lcdif" for i.MX6SX. - Should be "fsl,imx8mq-lcdif" for i.MX8MQ. -- reg: Address and length of the register set for LCDIF -- interrupts: Should contain LCDIF interrupt -- clocks: A list of phandle + clock-specifier pairs, one for each - entry in 'clock-names'. -- clock-names: A list of clock names. For MXSFB it should contain: - - "pix" for the LCDIF block clock - - (MX6SX-only) "axi", "disp_axi" for the bus interface clock - -Required sub-nodes: - - port: The connection to an encoder chip. - -Example: - - lcdif1: display-controller@2220000 { - compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif"; - reg = <0x02220000 0x4000>; - interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>, - <&clks IMX6SX_CLK_LCDIF_APB>, - <&clks IMX6SX_CLK_DISPLAY_AXI>; - clock-names = "pix", "axi", "disp_axi"; - - port { - parallel_out: endpoint { - remote-endpoint = <&panel_in_parallel>; - }; - }; - }; - -Deprecated bindings: -==================== -Required properties: -- compatible: Should be "fsl,imx23-lcdif" for i.MX23. - Should be "fsl,imx28-lcdif" for i.MX28. -- reg: Address and length of the register set for LCDIF -- interrupts: Should contain LCDIF interrupts -- display: phandle to display node (see below for details) - -* display node - -Required properties: -- bits-per-pixel: <16> for RGB565, <32> for RGB888/666. -- bus-width: number of data lines. Could be <8>, <16>, <18> or <24>. - -Required sub-node: -- display-timings: Refer to binding doc display-timing.txt for details. - -Examples: - -lcdif@80030000 { - compatible = "fsl,imx28-lcdif"; - reg = <0x80030000 2000>; - interrupts = <38 86>; - - display: display { - bits-per-pixel = <32>; - bus-width = <24>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <33500000>; - hactive = <800>; - vactive = <480>; - hfront-porch = <164>; - hback-porch = <89>; - hsync-len = <10>; - vback-porch = <23>; - vfront-porch = <10>; - vsync-len = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; - }; -}; diff --git a/dts/Bindings/display/panel/abt,y030xx067a.yaml b/dts/Bindings/display/panel/abt,y030xx067a.yaml new file mode 100644 index 0000000000..acd2f3faa6 --- /dev/null +++ b/dts/Bindings/display/panel/abt,y030xx067a.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/abt,y030xx067a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Asia Better Technology 3.0" (320x480 pixels) 24-bit IPS LCD panel + +maintainers: + - Paul Cercueil <paul@crapouillou.net> + +allOf: + - $ref: panel-common.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + const: abt,y030xx067a + + backlight: true + port: true + power-supply: true + reg: true + reset-gpios: true + +required: + - compatible + - reg + - power-supply + - reset-gpios + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "abt,y030xx067a"; + reg = <0>; + + spi-max-frequency = <3125000>; + + reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>; + + backlight = <&backlight>; + power-supply = <&vcc>; + + port { + panel_input: endpoint { + remote-endpoint = <&panel_output>; + }; + }; + }; + }; diff --git a/dts/Bindings/display/panel/advantech,idk-1110wr.yaml b/dts/Bindings/display/panel/advantech,idk-1110wr.yaml index 93878c2cd3..f6fea9085a 100644 --- a/dts/Bindings/display/panel/advantech,idk-1110wr.yaml +++ b/dts/Bindings/display/panel/advantech,idk-1110wr.yaml @@ -11,13 +11,23 @@ maintainers: - Thierry Reding <thierry.reding@gmail.com> allOf: - - $ref: lvds.yaml# + - $ref: panel-common.yaml# + - $ref: /schemas/display/lvds.yaml# + +select: + properties: + compatible: + contains: + const: advantech,idk-1110wr + + required: + - compatible properties: compatible: items: - const: advantech,idk-1110wr - - {} # panel-lvds, but not listed here to avoid false select + - const: panel-lvds data-mapping: const: jeida-24 @@ -35,6 +45,11 @@ additionalProperties: false required: - compatible + - data-mapping + - width-mm + - height-mm + - panel-timing + - port examples: - |+ diff --git a/dts/Bindings/display/panel/advantech,idk-2121wr.yaml b/dts/Bindings/display/panel/advantech,idk-2121wr.yaml index 6b7fddc80c..2e8dbdb5a3 100644 --- a/dts/Bindings/display/panel/advantech,idk-2121wr.yaml +++ b/dts/Bindings/display/panel/advantech,idk-2121wr.yaml @@ -19,6 +19,9 @@ description: | second port, therefore the ports must be marked accordingly (with either dual-lvds-odd-pixels or dual-lvds-even-pixels). +allOf: + - $ref: panel-common.yaml# + properties: compatible: items: @@ -37,34 +40,33 @@ properties: panel-timing: true ports: - type: object + $ref: /schemas/graph.yaml#/properties/ports + properties: port@0: - type: object + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false description: The sink for odd pixels. properties: - reg: - const: 0 - dual-lvds-odd-pixels: true required: - - reg - dual-lvds-odd-pixels port@1: - type: object + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false description: The sink for even pixels. properties: - reg: - const: 1 - dual-lvds-even-pixels: true required: - - reg - dual-lvds-even-pixels + required: + - port@0 + - port@1 + additionalProperties: false required: diff --git a/dts/Bindings/display/panel/arm,rtsm-display.yaml b/dts/Bindings/display/panel/arm,rtsm-display.yaml new file mode 100644 index 0000000000..4ad484f09b --- /dev/null +++ b/dts/Bindings/display/panel/arm,rtsm-display.yaml @@ -0,0 +1,27 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/arm,rtsm-display.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm RTSM Virtual Platforms Display + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: arm,rtsm-display + + port: true + +required: + - compatible + - port + +additionalProperties: false + +... diff --git a/dts/Bindings/display/panel/arm,versatile-tft-panel.txt b/dts/Bindings/display/panel/arm,versatile-tft-panel.txt deleted file mode 100644 index 0601a9e347..0000000000 --- a/dts/Bindings/display/panel/arm,versatile-tft-panel.txt +++ /dev/null @@ -1,31 +0,0 @@ -ARM Versatile TFT Panels - -These panels are connected to the daughterboards found on the -ARM Versatile reference designs. - -This device node must appear as a child to a "syscon"-compatible -node. - -Required properties: -- compatible: should be "arm,versatile-tft-panel" - -Required subnodes: -- port: see display/panel/panel-common.yaml, graph.txt - - -Example: - -sysreg@0 { - compatible = "arm,versatile-sysreg", "syscon", "simple-mfd"; - reg = <0x00000 0x1000>; - - panel: display@0 { - compatible = "arm,versatile-tft-panel"; - - port { - panel_in: endpoint { - remote-endpoint = <&foo>; - }; - }; - }; -}; diff --git a/dts/Bindings/display/panel/arm,versatile-tft-panel.yaml b/dts/Bindings/display/panel/arm,versatile-tft-panel.yaml new file mode 100644 index 0000000000..c9958f824d --- /dev/null +++ b/dts/Bindings/display/panel/arm,versatile-tft-panel.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/arm,versatile-tft-panel.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Versatile TFT Panels + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: | + These panels are connected to the daughterboards found on the + ARM Versatile reference designs. + + This device node must appear as a child to a "syscon"-compatible + node. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: arm,versatile-tft-panel + + port: true + +required: + - compatible + - port + +additionalProperties: false + +examples: + - | + sysreg@0 { + compatible = "arm,versatile-sysreg", "syscon", "simple-mfd"; + reg = <0x00000 0x1000>; + + panel { + compatible = "arm,versatile-tft-panel"; + + port { + panel_in: endpoint { + remote-endpoint = <&foo>; + }; + }; + }; + }; + +... diff --git a/dts/Bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml b/dts/Bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml new file mode 100644 index 0000000000..75a09df68b --- /dev/null +++ b/dts/Bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/asus,z00t-tm5p5-nt35596.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ASUS Z00T TM5P5 NT35596 5.5" 1080×1920 LCD Panel + +maintainers: + - Konrad Dybcio <konradybcio@gmail.com> + +description: |+ + This panel seems to only be found in the Asus Z00T + smartphone and we have no straightforward way of + actually getting the correct model number, + as no schematics are released publicly. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: asus,z00t-tm5p5-n35596 + reg: true + reset-gpios: true + vdd-supply: + description: core voltage supply + vddio-supply: + description: vddio supply + +required: + - compatible + - reg + - vdd-supply + - vddio-supply + - reset-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + reg = <0>; + + compatible = "asus,z00t-tm5p5-n35596"; + + vdd-supply = <&pm8916_l8>; + vddio-supply = <&pm8916_l6>; + reset-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/dts/Bindings/display/panel/auo,a030jtn01.yaml b/dts/Bindings/display/panel/auo,a030jtn01.yaml new file mode 100644 index 0000000000..86c834eb4d --- /dev/null +++ b/dts/Bindings/display/panel/auo,a030jtn01.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/auo,a030jtn01.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AUO A030JTN01 3.0" (320x480 pixels) 24-bit TFT LCD panel + +description: | + Delta RGB 8-bit panel found in some Retrogame handhelds + +maintainers: + - Paul Cercueil <paul@crapouillou.net> + - Christophe Branchereau <cbranchereau@gmail.com> + +allOf: + - $ref: panel-common.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + const: auo,a030jtn01 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - power-supply + - reset-gpios + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "auo,a030jtn01"; + reg = <0>; + + spi-max-frequency = <10000000>; + + reset-gpios = <&gpe 4 GPIO_ACTIVE_LOW>; + power-supply = <&lcd_power>; + + backlight = <&backlight>; + + port { + panel_input: endpoint { + remote-endpoint = <&panel_output>; + }; + }; + }; + }; diff --git a/dts/Bindings/display/panel/boe,bf060y8m-aj0.yaml b/dts/Bindings/display/panel/boe,bf060y8m-aj0.yaml new file mode 100644 index 0000000000..a8f3afa922 --- /dev/null +++ b/dts/Bindings/display/panel/boe,bf060y8m-aj0.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/boe,bf060y8m-aj0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: BOE BF060Y8M-AJ0 5.99" 1080x2160 AMOLED Panel + +maintainers: + - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> + +description: | + This is a 5.99" 1080x2160 16.7M Color active matrix AMOLED + video mode panel module on MIPI-DSI 4-Lane interface, GGRB + pixel arrangement, 63 micrometers pitch, with an active + area of 68.04 x 136.08 millimeters. + Each pixel is divided into red and green dots, or blue and + green dots, and two pixels share red or blue dots which are + arranged in vertical stripe. + The DriverIC for this panel module is SW43404. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: boe,bf060y8m-aj0 + + elvdd-supply: + description: EL Driving positive (VDD) supply (4.40-4.80V) + elvss-supply: + description: EL Driving negative (VSS) supply (-5.00V to -1.40V) + vcc-supply: + description: Core (TSP) voltage supply (2.70-3.60V) + vci-supply: + description: DriverIC Operation supply (2.60-3.60V) + vddio-supply: + description: I/O voltage supply (1.62-1.98V) + + port: true + reg: true + reset-gpios: true + +required: + - compatible + - elvdd-supply + - elvss-supply + - vcc-supply + - vci-supply + - vddio-supply + - reg + - reset-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "boe,bf060y8m-aj0"; + reg = <0>; + + reset-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>; + + vcc-supply = <&disp_vcc_vreg>; + vddio-supply = <&disp_vddio_vreg>; + vci-supply = <&disp_vci_vreg>; + elvdd-supply = <&disp_elvdd_vreg>; + elvss-supply = <&disp_elvss_vreg>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; diff --git a/dts/Bindings/display/panel/boe,himax8279d.txt b/dts/Bindings/display/panel/boe,himax8279d.txt deleted file mode 100644 index 3caea2172b..0000000000 --- a/dts/Bindings/display/panel/boe,himax8279d.txt +++ /dev/null @@ -1,24 +0,0 @@ -Boe Himax8279d 1200x1920 TFT LCD panel - -Required properties: -- compatible: should be "boe,himax8279d8p" and one of: "boe,himax8279d10p" -- reg: DSI virtual channel of the peripheral -- enable-gpios: panel enable gpio -- pp33-gpios: a GPIO phandle for the 3.3v pin that provides the supply voltage -- pp18-gpios: a GPIO phandle for the 1.8v pin that provides the supply voltage - -Optional properties: -- backlight: phandle of the backlight device attached to the panel - -Example: - - &mipi_dsi { - panel { - compatible = "boe,himax8279d8p", "boe,himax8279d10p"; - reg = <0>; - backlight = <&backlight>; - enable-gpios = <&gpio 45 GPIO_ACTIVE_HIGH>; - pp33-gpios = <&gpio 35 GPIO_ACTIVE_HIGH>; - pp18-gpios = <&gpio 36 GPIO_ACTIVE_HIGH>; - }; - }; diff --git a/dts/Bindings/display/panel/boe,himax8279d.yaml b/dts/Bindings/display/panel/boe,himax8279d.yaml new file mode 100644 index 0000000000..272a3a018a --- /dev/null +++ b/dts/Bindings/display/panel/boe,himax8279d.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/boe,himax8279d.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Boe Himax8279d 1200x1920 TFT LCD panel + +maintainers: + - Jerry Han <jerry.han.hq@gmail.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - const: boe,himax8279d8p + - const: boe,himax8279d10p + + backlight: true + enable-gpios: true + reg: true + + pp33-gpios: + maxItems: 1 + description: GPIO for the 3.3v pin that provides the supply voltage + + pp18-gpios: + maxItems: 1 + description: GPIO for the 1.8v pin that provides the supply voltage + +required: + - compatible + - reg + - enable-gpios + - pp33-gpios + - pp18-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "boe,himax8279d8p", "boe,himax8279d10p"; + reg = <0>; + backlight = <&backlight>; + enable-gpios = <&gpio 45 GPIO_ACTIVE_HIGH>; + pp33-gpios = <&gpio 35 GPIO_ACTIVE_HIGH>; + pp18-gpios = <&gpio 36 GPIO_ACTIVE_HIGH>; + }; + }; + +... diff --git a/dts/Bindings/display/panel/boe,tv101wum-nl6.yaml b/dts/Bindings/display/panel/boe,tv101wum-nl6.yaml index 7402134591..906ef62709 100644 --- a/dts/Bindings/display/panel/boe,tv101wum-nl6.yaml +++ b/dts/Bindings/display/panel/boe,tv101wum-nl6.yaml @@ -24,6 +24,18 @@ properties: - boe,tv101wum-n53 # AUO B101UAN08.3 10.1" WUXGA TFT LCD panel - auo,b101uan08.3 + # BOE TV105WUM-NW0 10.5" WUXGA TFT LCD panel + - boe,tv105wum-nw0 + # BOE TV110C9M-LL3 10.95" WUXGA TFT LCD panel + - boe,tv110c9m-ll3 + # INX HJ110IZ-01A 10.95" WUXGA TFT LCD panel + - innolux,hj110iz-01a + # STARRY 2081101QFH032011-53G 10.1" WUXGA TFT LCD panel + - starry,2081101qfh032011-53g + # STARRY himax83102-j02 10.51" WUXGA TFT LCD panel + - starry,himax83102-j02 + # STARRY ili9882t 10.51" WUXGA TFT LCD panel + - starry,ili9882t reg: description: the virtual channel number of a DSI peripheral @@ -34,6 +46,9 @@ properties: pp1800-supply: description: core voltage supply + pp3300-supply: + description: core voltage supply + avdd-supply: description: phandle of the regulator that provides positive voltage @@ -44,14 +59,15 @@ properties: description: phandle of the backlight device attached to the panel port: true + rotation: true required: - - compatible - - reg - - enable-gpios - - pp1800-supply - - avdd-supply - - avee-supply + - compatible + - reg + - enable-gpios + - pp1800-supply + - avdd-supply + - avee-supply additionalProperties: false @@ -68,7 +84,6 @@ examples: avee-supply = <&ppvarp_lcd>; pp1800-supply = <&pp1800_lcd>; backlight = <&backlight_lcd0>; - status = "okay"; port { panel_in: endpoint { remote-endpoint = <&dsi_out>; diff --git a/dts/Bindings/display/panel/display-timings.yaml b/dts/Bindings/display/panel/display-timings.yaml index c8c0c9cb04..dc5f7e36e3 100644 --- a/dts/Bindings/display/panel/display-timings.yaml +++ b/dts/Bindings/display/panel/display-timings.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/display/panel/display-timings.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: display timing bindings +title: display timings maintainers: - Thierry Reding <thierry.reding@gmail.com> @@ -14,7 +14,7 @@ maintainers: description: | A display panel may be able to handle several display timings, with different resolutions. - The display-timings node makes it possible to specify the timing + The display-timings node makes it possible to specify the timings and to specify the timing that is native for the display. properties: @@ -25,14 +25,13 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle description: | The default display timing is the one specified as native-mode. - If no native-mode is specified then the first node is assumed the - native mode. + If no native-mode is specified then the first node is assumed + to be the native mode. patternProperties: "^timing": type: object - allOf: - - $ref: panel-timing.yaml# + $ref: panel-timing.yaml# additionalProperties: false diff --git a/dts/Bindings/display/panel/ebbg,ft8719.yaml b/dts/Bindings/display/panel/ebbg,ft8719.yaml new file mode 100644 index 0000000000..80deedc01c --- /dev/null +++ b/dts/Bindings/display/panel/ebbg,ft8719.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/ebbg,ft8719.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: EBBG FT8719 MIPI-DSI LCD panel + +maintainers: + - Joel Selvaraj <jo@jsfamily.in> + +description: | + The FT8719 panel from EBBG is a FHD+ LCD display panel with a resolution + of 1080x2246. It is a video mode DSI panel. The backlight is managed + through the QCOM WLED driver. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: ebbg,ft8719 + + reg: + maxItems: 1 + description: DSI virtual channel of the peripheral + + vddio-supply: + description: power IC supply regulator + + vddpos-supply: + description: positive boost supply regulator + + vddneg-supply: + description: negative boost supply regulator + +required: + - compatible + - reg + - vddio-supply + - vddpos-supply + - vddneg-supply + - reset-gpios + - port + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "ebbg,ft8719"; + reg = <0>; + + vddio-supply = <&vreg_l14a_1p88>; + vddpos-supply = <&lab>; + vddneg-supply = <&ibb>; + + reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; + + backlight = <&pmi8998_wled>; + + port { + ebbg_ft8719_in_0: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; diff --git a/dts/Bindings/display/panel/elida,kd35t133.yaml b/dts/Bindings/display/panel/elida,kd35t133.yaml index aa761f697b..265ab6d305 100644 --- a/dts/Bindings/display/panel/elida,kd35t133.yaml +++ b/dts/Bindings/display/panel/elida,kd35t133.yaml @@ -17,16 +17,19 @@ properties: const: elida,kd35t133 reg: true backlight: true + port: true reset-gpios: true + rotation: true iovcc-supply: - description: regulator that supplies the iovcc voltage + description: regulator that supplies the iovcc voltage vdd-supply: - description: regulator that supplies the vdd voltage + description: regulator that supplies the vdd voltage required: - compatible - reg - backlight + - port - iovcc-supply - vdd-supply @@ -43,6 +46,12 @@ examples: backlight = <&backlight>; iovcc-supply = <&vcc_1v8>; vdd-supply = <&vcc3v3_lcd>; + + port { + mipi_in_panel: endpoint { + remote-endpoint = <&mipi_out_panel>; + }; + }; }; }; diff --git a/dts/Bindings/display/panel/fascontek,fs035vg158.yaml b/dts/Bindings/display/panel/fascontek,fs035vg158.yaml new file mode 100644 index 0000000000..d13c4bd26d --- /dev/null +++ b/dts/Bindings/display/panel/fascontek,fs035vg158.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/fascontek,fs035vg158.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Fascontek FS035VG158 3.5" (640x480 pixels) 24-bit IPS LCD panel + +maintainers: + - John Watts <contact@jookia.org> + +allOf: + - $ref: panel-common.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + const: fascontek,fs035vg158 + + spi-3wire: true + +required: + - compatible + - reg + - port + - power-supply + - reset-gpios + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "fascontek,fs035vg158"; + reg = <0>; + + spi-3wire; + spi-max-frequency = <3125000>; + + reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>; + + backlight = <&backlight>; + power-supply = <&vcc>; + + port { + panel_input: endpoint { + remote-endpoint = <&panel_output>; + }; + }; + }; + }; diff --git a/dts/Bindings/display/panel/feixin,k101-im2ba02.yaml b/dts/Bindings/display/panel/feixin,k101-im2ba02.yaml index 927f1eea18..81adb82f06 100644 --- a/dts/Bindings/display/panel/feixin,k101-im2ba02.yaml +++ b/dts/Bindings/display/panel/feixin,k101-im2ba02.yaml @@ -19,11 +19,11 @@ properties: backlight: true reset-gpios: true avdd-supply: - description: regulator that supplies the AVDD voltage + description: regulator that supplies the AVDD voltage dvdd-supply: - description: regulator that supplies the DVDD voltage + description: regulator that supplies the DVDD voltage cvdd-supply: - description: regulator that supplies the CVDD voltage + description: regulator that supplies the CVDD voltage required: - compatible diff --git a/dts/Bindings/display/panel/feiyang,fy07024di26a30d.txt b/dts/Bindings/display/panel/feiyang,fy07024di26a30d.txt deleted file mode 100644 index 82caa7b65a..0000000000 --- a/dts/Bindings/display/panel/feiyang,fy07024di26a30d.txt +++ /dev/null @@ -1,20 +0,0 @@ -Feiyang FY07024DI26A30-D 7" MIPI-DSI LCD Panel - -Required properties: -- compatible: must be "feiyang,fy07024di26a30d" -- reg: DSI virtual channel used by that screen -- avdd-supply: analog regulator dc1 switch -- dvdd-supply: 3v3 digital regulator -- reset-gpios: a GPIO phandle for the reset pin - -Optional properties: -- backlight: phandle for the backlight control. - -panel@0 { - compatible = "feiyang,fy07024di26a30d"; - reg = <0>; - avdd-supply = <®_dc1sw>; - dvdd-supply = <®_dldo2>; - reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */ - backlight = <&backlight>; -}; diff --git a/dts/Bindings/display/panel/feiyang,fy07024di26a30d.yaml b/dts/Bindings/display/panel/feiyang,fy07024di26a30d.yaml new file mode 100644 index 0000000000..92df69e80a --- /dev/null +++ b/dts/Bindings/display/panel/feiyang,fy07024di26a30d.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/feiyang,fy07024di26a30d.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Feiyang FY07024DI26A30-D 7" MIPI-DSI LCD Panel + +maintainers: + - Jagan Teki <jagan@amarulasolutions.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: feiyang,fy07024di26a30d + + reg: + description: DSI virtual channel used by that screen + maxItems: 1 + + avdd-supply: + description: analog regulator dc1 switch + + dvdd-supply: + description: 3v3 digital regulator + + port: true + reset-gpios: true + + backlight: true + +required: + - compatible + - reg + - avdd-supply + - dvdd-supply + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "feiyang,fy07024di26a30d"; + reg = <0>; + avdd-supply = <®_dc1sw>; + dvdd-supply = <®_dldo2>; + reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */ + backlight = <&backlight>; + + port { + mipi_in_panel: endpoint { + remote-endpoint = <&mipi_out_panel>; + }; + }; + }; + }; diff --git a/dts/Bindings/display/panel/focaltech,gpt3.yaml b/dts/Bindings/display/panel/focaltech,gpt3.yaml new file mode 100644 index 0000000000..d54e96b2a9 --- /dev/null +++ b/dts/Bindings/display/panel/focaltech,gpt3.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/focaltech,gpt3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Focaltech GPT3 3.0" (640x480 pixels) IPS LCD panel + +maintainers: + - Christophe Branchereau <cbranchereau@gmail.com> + +allOf: + - $ref: panel-common.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + const: focaltech,gpt3 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - power-supply + - reset-gpios + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "focaltech,gpt3"; + reg = <0>; + + spi-max-frequency = <3125000>; + + reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>; + + backlight = <&backlight>; + power-supply = <&vcc>; + + port { + panel_input: endpoint { + remote-endpoint = <&panel_output>; + }; + }; + }; + }; diff --git a/dts/Bindings/display/panel/himax,hx8394.yaml b/dts/Bindings/display/panel/himax,hx8394.yaml new file mode 100644 index 0000000000..916bb7f942 --- /dev/null +++ b/dts/Bindings/display/panel/himax,hx8394.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/himax,hx8394.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Himax HX8394 MIPI-DSI LCD panel controller + +maintainers: + - Ondrej Jirman <megi@xff.cz> + - Javier Martinez Canillas <javierm@redhat.com> + +description: + Device tree bindings for panels based on the Himax HX8394 controller, + such as the HannStar HSD060BHW4 720x1440 TFT LCD panel connected with + a MIPI-DSI video interface. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - enum: + - hannstar,hsd060bhw4 + - powkiddy,x55-panel + - const: himax,hx8394 + + reg: true + + reset-gpios: true + + backlight: true + + rotation: true + + port: true + + vcc-supply: + description: Panel power supply + + iovcc-supply: + description: I/O voltage supply + +required: + - compatible + - reg + - reset-gpios + - backlight + - port + - vcc-supply + - iovcc-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "hannstar,hsd060bhw4", "himax,hx8394"; + reg = <0>; + vcc-supply = <®_2v8_p>; + iovcc-supply = <®_1v8_p>; + reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>; + backlight = <&backlight>; + + port { + mipi_in_panel: endpoint { + remote-endpoint = <&mipi_out_panel>; + }; + }; + }; + }; + +... diff --git a/dts/Bindings/display/panel/ilitek,ili9163.yaml b/dts/Bindings/display/panel/ilitek,ili9163.yaml new file mode 100644 index 0000000000..3cabbba865 --- /dev/null +++ b/dts/Bindings/display/panel/ilitek,ili9163.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/ilitek,ili9163.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ilitek ILI9163 display panels + +maintainers: + - Daniel Mack <daniel@zonque.org> + +description: + This binding is for display panels using an Ilitek ILI9163 controller in SPI + mode. + +allOf: + - $ref: panel-common.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + items: + - enum: + - newhaven,1.8-128160EF + - const: ilitek,ili9163 + + spi-max-frequency: + maximum: 32000000 + + dc-gpios: + maxItems: 1 + description: Display data/command selection (D/CX) + + backlight: true + reg: true + reset-gpios: true + rotation: true + +required: + - compatible + - reg + - dc-gpios + - reset-gpios + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + display@0 { + compatible = "newhaven,1.8-128160EF", "ilitek,ili9163"; + reg = <0>; + spi-max-frequency = <32000000>; + dc-gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>; + rotation = <180>; + backlight = <&backlight>; + }; + }; + +... diff --git a/dts/Bindings/display/panel/ilitek,ili9322.txt b/dts/Bindings/display/panel/ilitek,ili9322.txt deleted file mode 100644 index 3d5ce6ad6e..0000000000 --- a/dts/Bindings/display/panel/ilitek,ili9322.txt +++ /dev/null @@ -1,49 +0,0 @@ -Ilitek ILI9322 TFT panel driver with SPI control bus - -This is a driver for 320x240 TFT panels, accepting a variety of input -streams that get adapted and scaled to the panel. The panel output has -960 TFT source driver pins and 240 TFT gate driver pins, VCOM, VCOML and -VCOMH outputs. - -Required properties: - - compatible: "dlink,dir-685-panel", "ilitek,ili9322" - (full system-specific compatible is always required to look up configuration) - - reg: address of the panel on the SPI bus - -Optional properties: - - vcc-supply: core voltage supply, see regulator/regulator.txt - - iovcc-supply: voltage supply for the interface input/output signals, - see regulator/regulator.txt - - vci-supply: voltage supply for analog parts, see regulator/regulator.txt - - reset-gpios: a GPIO spec for the reset pin, see gpio/gpio.txt - - The following optional properties only apply to RGB and YUV input modes and - can be omitted for BT.656 input modes: - - - pixelclk-active: see display/panel/display-timing.txt - - de-active: see display/panel/display-timing.txt - - hsync-active: see display/panel/display-timing.txt - - vsync-active: see display/panel/display-timing.txt - -The panel must obey the rules for a SPI slave device as specified in -spi/spi-bus.txt - -The device node can contain one 'port' child node with one child -'endpoint' node, according to the bindings defined in -media/video-interfaces.txt. This node should describe panel's video bus. - -Example: - -panel: display@0 { - compatible = "dlink,dir-685-panel", "ilitek,ili9322"; - reg = <0>; - vcc-supply = <&vdisp>; - iovcc-supply = <&vdisp>; - vci-supply = <&vdisp>; - - port { - panel_in: endpoint { - remote-endpoint = <&display_out>; - }; - }; -}; diff --git a/dts/Bindings/display/panel/ilitek,ili9322.yaml b/dts/Bindings/display/panel/ilitek,ili9322.yaml new file mode 100644 index 0000000000..7d221ef354 --- /dev/null +++ b/dts/Bindings/display/panel/ilitek,ili9322.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/ilitek,ili9322.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ilitek ILI9322 TFT panel driver with SPI control bus + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: | + This is a driver for 320x240 TFT panels, accepting a variety of input + streams that get adapted and scaled to the panel. The panel output has + 960 TFT source driver pins and 240 TFT gate driver pins, VCOM, VCOML and + VCOMH outputs. + +allOf: + - $ref: panel-common.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + items: + - enum: + - dlink,dir-685-panel + - const: ilitek,ili9322 + + reset-gpios: true + port: true + + vcc-supply: + description: Core voltage supply + + iovcc-supply: + description: Voltage supply for the interface input/output signals + + vci-supply: + description: Voltage supply for analog parts + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + panel: display@0 { + compatible = "dlink,dir-685-panel", "ilitek,ili9322"; + reg = <0>; + vcc-supply = <&vdisp>; + iovcc-supply = <&vdisp>; + vci-supply = <&vdisp>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; + }; + +... diff --git a/dts/Bindings/display/panel/ilitek,ili9341.yaml b/dts/Bindings/display/panel/ilitek,ili9341.yaml new file mode 100644 index 0000000000..94f169ea06 --- /dev/null +++ b/dts/Bindings/display/panel/ilitek,ili9341.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/ilitek,ili9341.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ilitek-9341 Display Panel + +maintainers: + - Dillon Min <dillon.minfei@gmail.com> + +description: | + Ilitek ILI9341 TFT panel driver with SPI control bus + This is a driver for 320x240 TFT panels, accepting a rgb input + streams with 16 bits or 18 bits. + +allOf: + - $ref: panel-common.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + items: + - enum: + - adafruit,yx240qv29 + # ili9341 240*320 Color on stm32f429-disco board + - st,sf-tc240t-9370-t + - canaan,kd233-tft + - const: ilitek,ili9341 + + reg: true + + dc-gpios: + maxItems: 1 + description: Display data/command selection (D/CX) of this DBI panel + + spi-3wire: true + + spi-max-frequency: + const: 10000000 + + port: true + + vci-supply: + description: Analog voltage supply (2.5 .. 3.3V) + + vddi-supply: + description: Voltage supply for interface logic (1.65 .. 3.3 V) + + vddi-led-supply: + description: Voltage supply for the LED driver (1.65 .. 3.3 V) + +unevaluatedProperties: false + +required: + - compatible + - reg + - dc-gpios + +if: + properties: + compatible: + contains: + enum: + - st,sf-tc240t-9370-t +then: + required: + - port + +examples: + - |+ + #include <dt-bindings/gpio/gpio.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + panel: display@0 { + compatible = "st,sf-tc240t-9370-t", + "ilitek,ili9341"; + reg = <0>; + spi-3wire; + spi-max-frequency = <10000000>; + dc-gpios = <&gpiod 13 0>; + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; + display@1{ + compatible = "adafruit,yx240qv29", "ilitek,ili9341"; + reg = <1>; + spi-max-frequency = <10000000>; + dc-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; + rotation = <270>; + backlight = <&backlight>; + }; + }; +... diff --git a/dts/Bindings/display/panel/ilitek,ili9805.yaml b/dts/Bindings/display/panel/ilitek,ili9805.yaml new file mode 100644 index 0000000000..f4f91f93f4 --- /dev/null +++ b/dts/Bindings/display/panel/ilitek,ili9805.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/ilitek,ili9805.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ilitek ILI9805 based MIPI-DSI panels + +maintainers: + - Michael Trimarchi <michael@amarulasolutions.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - enum: + - giantplus,gpm1790a0 + - tianma,tm041xdhg01 + - const: ilitek,ili9805 + + avdd-supply: true + dvdd-supply: true + reg: true + +required: + - compatible + - avdd-supply + - dvdd-supply + - reg + - reset-gpios + - port + - backlight + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "giantplus,gpm1790a0", "ilitek,ili9805"; + reg = <0>; + avdd-supply = <&avdd_display>; + dvdd-supply = <&dvdd_display>; + reset-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL05 */ + backlight = <&backlight>; + + port { + panel_in: endpoint { + remote-endpoint = <&mipi_dsi_out>; + }; + }; + }; + }; + +... diff --git a/dts/Bindings/display/panel/ilitek,ili9881c.txt b/dts/Bindings/display/panel/ilitek,ili9881c.txt deleted file mode 100644 index 4a041acb4e..0000000000 --- a/dts/Bindings/display/panel/ilitek,ili9881c.txt +++ /dev/null @@ -1,20 +0,0 @@ -Ilitek ILI9881c based MIPI-DSI panels - -Required properties: - - compatible: must be "ilitek,ili9881c" and one of: - * "bananapi,lhr050h41" - - reg: DSI virtual channel used by that screen - - power-supply: phandle to the power regulator - - reset-gpios: a GPIO phandle for the reset pin - -Optional properties: - - backlight: phandle to the backlight used - -Example: -panel@0 { - compatible = "bananapi,lhr050h41", "ilitek,ili9881c"; - reg = <0>; - power-supply = <®_display>; - reset-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL05 */ - backlight = <&pwm_bl>; -}; diff --git a/dts/Bindings/display/panel/ilitek,ili9881c.yaml b/dts/Bindings/display/panel/ilitek,ili9881c.yaml new file mode 100644 index 0000000000..b1e624be3e --- /dev/null +++ b/dts/Bindings/display/panel/ilitek,ili9881c.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/ilitek,ili9881c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ilitek ILI9881c based MIPI-DSI panels + +maintainers: + - Maxime Ripard <mripard@kernel.org> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - enum: + - ampire,am8001280g + - bananapi,lhr050h41 + - feixin,k101-im2byl02 + - tdo,tl050hdv35 + - wanchanglong,w552946aba + - const: ilitek,ili9881c + + backlight: true + power-supply: true + reg: true + reset-gpios: true + rotation: true + +required: + - compatible + - power-supply + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "bananapi,lhr050h41", "ilitek,ili9881c"; + reg = <0>; + power-supply = <®_display>; + reset-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL05 */ + backlight = <&pwm_bl>; + }; + }; + +... diff --git a/dts/Bindings/display/panel/innolux,ee101ia-01d.yaml b/dts/Bindings/display/panel/innolux,ee101ia-01d.yaml index a69681e724..ab6b7be883 100644 --- a/dts/Bindings/display/panel/innolux,ee101ia-01d.yaml +++ b/dts/Bindings/display/panel/innolux,ee101ia-01d.yaml @@ -11,15 +11,26 @@ maintainers: - Thierry Reding <thierry.reding@gmail.com> allOf: - - $ref: lvds.yaml# + - $ref: panel-common.yaml# + - $ref: /schemas/display/lvds.yaml# + +select: + properties: + compatible: + contains: + const: innolux,ee101ia-01d + + required: + - compatible properties: compatible: items: - const: innolux,ee101ia-01d - - {} # panel-lvds, but not listed here to avoid false select + - const: panel-lvds backlight: true + data-mapping: true enable-gpios: true power-supply: true width-mm: true @@ -27,5 +38,13 @@ properties: panel-timing: true port: true +required: + - compatible + - data-mapping + - width-mm + - height-mm + - panel-timing + - port + additionalProperties: false ... diff --git a/dts/Bindings/display/panel/innolux,ej030na.yaml b/dts/Bindings/display/panel/innolux,ej030na.yaml new file mode 100644 index 0000000000..72788e3e6c --- /dev/null +++ b/dts/Bindings/display/panel/innolux,ej030na.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/innolux,ej030na.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Innolux EJ030NA 3.0" (320x480 pixels) 24-bit TFT LCD panel + +maintainers: + - Paul Cercueil <paul@crapouillou.net> + +allOf: + - $ref: panel-common.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + const: innolux,ej030na + + backlight: true + port: true + power-supply: true + reg: true + reset-gpios: true + +required: + - compatible + - reg + - power-supply + - reset-gpios + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "innolux,ej030na"; + reg = <0>; + + spi-max-frequency = <10000000>; + + reset-gpios = <&gpe 4 GPIO_ACTIVE_LOW>; + power-supply = <&lcd_power>; + + backlight = <&backlight>; + + port { + panel_input: endpoint { + remote-endpoint = <&panel_output>; + }; + }; + }; + }; diff --git a/dts/Bindings/display/panel/innolux,p079zca.txt b/dts/Bindings/display/panel/innolux,p079zca.txt deleted file mode 100644 index 3ab8c7412c..0000000000 --- a/dts/Bindings/display/panel/innolux,p079zca.txt +++ /dev/null @@ -1,22 +0,0 @@ -Innolux P079ZCA 7.85" 768x1024 TFT LCD panel - -Required properties: -- compatible: should be "innolux,p079zca" -- reg: DSI virtual channel of the peripheral -- power-supply: phandle of the regulator that provides the supply voltage -- enable-gpios: panel enable gpio - -Optional properties: -- backlight: phandle of the backlight device attached to the panel - -Example: - - &mipi_dsi { - panel@0 { - compatible = "innolux,p079zca"; - reg = <0>; - power-supply = <...>; - backlight = <&backlight>; - enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; - }; - }; diff --git a/dts/Bindings/display/panel/innolux,p097pfg.txt b/dts/Bindings/display/panel/innolux,p097pfg.txt deleted file mode 100644 index d1cab3a8f0..0000000000 --- a/dts/Bindings/display/panel/innolux,p097pfg.txt +++ /dev/null @@ -1,24 +0,0 @@ -Innolux P097PFG 9.7" 1536x2048 TFT LCD panel - -Required properties: -- compatible: should be "innolux,p097pfg" -- reg: DSI virtual channel of the peripheral -- avdd-supply: phandle of the regulator that provides positive voltage -- avee-supply: phandle of the regulator that provides negative voltage -- enable-gpios: panel enable gpio - -Optional properties: -- backlight: phandle of the backlight device attached to the panel - -Example: - - &mipi_dsi { - panel@0 { - compatible = "innolux,p079zca"; - reg = <0>; - avdd-supply = <...>; - avee-supply = <...>; - backlight = <&backlight>; - enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; - }; - }; diff --git a/dts/Bindings/display/panel/innolux,p097pfg.yaml b/dts/Bindings/display/panel/innolux,p097pfg.yaml new file mode 100644 index 0000000000..5a5f071627 --- /dev/null +++ b/dts/Bindings/display/panel/innolux,p097pfg.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/innolux,p097pfg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Innolux P097PFG 9.7" 1536x2048 TFT LCD panel + +maintainers: + - Lin Huang <hl@rock-chips.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: innolux,p097pfg + + backlight: true + enable-gpios: true + reg: true + + avdd-supply: + description: The regulator that provides positive voltage + + avee-supply: + description: The regulator that provides negative voltage + +required: + - compatible + - reg + - avdd-supply + - avee-supply + - enable-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "innolux,p097pfg"; + reg = <0>; + avdd-supply = <&avdd>; + avee-supply = <&avee>; + backlight = <&backlight>; + enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; + }; + }; + +... diff --git a/dts/Bindings/display/panel/innolux,p120zdg-bf1.txt b/dts/Bindings/display/panel/innolux,p120zdg-bf1.txt deleted file mode 100644 index 513f03466a..0000000000 --- a/dts/Bindings/display/panel/innolux,p120zdg-bf1.txt +++ /dev/null @@ -1,22 +0,0 @@ -Innolux P120ZDG-BF1 12.02 inch eDP 2K display panel - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. - -Required properties: -- compatible: should be "innolux,p120zdg-bf1" -- power-supply: regulator to provide the supply voltage - -Optional properties: -- enable-gpios: GPIO pin to enable or disable the panel -- backlight: phandle of the backlight device attached to the panel -- no-hpd: If HPD isn't hooked up; add this property. - -Example: - panel_edp: panel-edp { - compatible = "innolux,p120zdg-bf1"; - enable-gpios = <&msmgpio 31 GPIO_ACTIVE_LOW>; - power-supply = <&pm8916_l2>; - backlight = <&backlight>; - no-hpd; - }; diff --git a/dts/Bindings/display/panel/jadard,jd9365da-h3.yaml b/dts/Bindings/display/panel/jadard,jd9365da-h3.yaml new file mode 100644 index 0000000000..41eb7fbf77 --- /dev/null +++ b/dts/Bindings/display/panel/jadard,jd9365da-h3.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/jadard,jd9365da-h3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Jadard JD9365DA-HE WXGA DSI panel + +maintainers: + - Jagan Teki <jagan@edgeble.ai> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - enum: + - chongzhou,cz101b4001 + - radxa,display-10hd-ad001 + - radxa,display-8hd-ad002 + - const: jadard,jd9365da-h3 + + reg: true + + vdd-supply: + description: supply regulator for VDD, usually 3.3V + + vccio-supply: + description: supply regulator for VCCIO, usually 1.8V + + reset-gpios: true + + backlight: true + + port: true + +required: + - compatible + - reg + - vdd-supply + - vccio-supply + - reset-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/pinctrl/rockchip.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "chongzhou,cz101b4001", "jadard,jd9365da-h3"; + reg = <0>; + vdd-supply = <&lcd_3v3>; + vccio-supply = <&vcca_1v8>; + reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>; + backlight = <&backlight>; + + port { + mipi_in_panel: endpoint { + remote-endpoint = <&mipi_out_panel>; + }; + }; + }; + }; + +... diff --git a/dts/Bindings/display/panel/jdi,lpm102a188a.yaml b/dts/Bindings/display/panel/jdi,lpm102a188a.yaml new file mode 100644 index 0000000000..2f4d27a309 --- /dev/null +++ b/dts/Bindings/display/panel/jdi,lpm102a188a.yaml @@ -0,0 +1,94 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/jdi,lpm102a188a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: JDI LPM102A188A 2560x1800 10.2" DSI Panel + +maintainers: + - Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt> + +description: | + This panel requires a dual-channel DSI host to operate. It supports two modes: + - left-right: each channel drives the left or right half of the screen + - even-odd: each channel drives the even or odd lines of the screen + + Each of the DSI channels controls a separate DSI peripheral. The peripheral + driven by the first link (DSI-LINK1) is considered the primary peripheral + and controls the device. The 'link2' property contains a phandle to the + peripheral driven by the second link (DSI-LINK2). + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: jdi,lpm102a188a + + reg: true + enable-gpios: true + reset-gpios: true + power-supply: true + backlight: true + + ddi-supply: + description: The regulator that provides IOVCC (1.8V). + + link2: + $ref: /schemas/types.yaml#/definitions/phandle + description: | + phandle to the DSI peripheral on the secondary link. Note that the + presence of this property marks the containing node as DSI-LINK1. + +required: + - compatible + - reg + +if: + required: + - link2 +then: + required: + - power-supply + - ddi-supply + - enable-gpios + - reset-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/gpio/tegra-gpio.h> + + dsia: dsi@54300000 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x54300000 0x0 0x00040000>; + + link2: panel@0 { + compatible = "jdi,lpm102a188a"; + reg = <0>; + }; + }; + + dsib: dsi@54400000{ + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x54400000 0x0 0x00040000>; + nvidia,ganged-mode = <&dsia>; + + link1: panel@0 { + compatible = "jdi,lpm102a188a"; + reg = <0>; + power-supply = <&pplcd_vdd>; + ddi-supply = <&pp1800_lcdio>; + enable-gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; + link2 = <&link2>; + backlight = <&backlight>; + }; + }; + +... diff --git a/dts/Bindings/display/panel/jdi,lt070me05000.txt b/dts/Bindings/display/panel/jdi,lt070me05000.txt deleted file mode 100644 index 4989c91d50..0000000000 --- a/dts/Bindings/display/panel/jdi,lt070me05000.txt +++ /dev/null @@ -1,31 +0,0 @@ -JDI model LT070ME05000 1200x1920 7" DSI Panel - -Required properties: -- compatible: should be "jdi,lt070me05000" -- vddp-supply: phandle of the regulator that provides the supply voltage - Power IC supply (3-5V) -- iovcc-supply: phandle of the regulator that provides the supply voltage - IOVCC , power supply for LCM (1.8V) -- enable-gpios: phandle of gpio for enable line - LED_EN, LED backlight enable, High active -- reset-gpios: phandle of gpio for reset line - This should be 8mA, gpio can be configured using mux, pinctrl, pinctrl-names - XRES, Reset, Low active -- dcdc-en-gpios: phandle of the gpio for power ic line - Power IC supply enable, High active - -Example: - - dsi0: qcom,mdss_dsi@4700000 { - panel@0 { - compatible = "jdi,lt070me05000"; - reg = <0>; - - vddp-supply = <&pm8921_l17>; - iovcc-supply = <&pm8921_lvs7>; - - enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>; - reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>; - dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>; - }; - }; diff --git a/dts/Bindings/display/panel/jdi,lt070me05000.yaml b/dts/Bindings/display/panel/jdi,lt070me05000.yaml new file mode 100644 index 0000000000..63c82a4378 --- /dev/null +++ b/dts/Bindings/display/panel/jdi,lt070me05000.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/jdi,lt070me05000.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: JDI model LT070ME05000 1200x1920 7" DSI Panel + +maintainers: + - Vinay Simha BN <simhavcs@gmail.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: jdi,lt070me05000 + + enable-gpios: true + reg: true + reset-gpios: true + + vddp-supply: + description: | + The regulator that provides the supply voltage Power IC supply (3-5V) + + iovcc-supply: + description: | + The regulator that provides the supply voltage IOVCC, + power supply for LCM (1.8V) + + dcdc-en-gpios: + maxItems: 1 + description: | + phandle of the gpio for power ic line + Power IC supply enable, High active + + port: true + +required: + - compatible + - reg + - vddp-supply + - iovcc-supply + - enable-gpios + - reset-gpios + - dcdc-en-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "jdi,lt070me05000"; + reg = <0>; + + vddp-supply = <&pm8921_l17>; + iovcc-supply = <&pm8921_lvs7>; + + enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>; + reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>; + dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>; + }; + }; + +... diff --git a/dts/Bindings/display/panel/kingdisplay,kd035g6-54nt.txt b/dts/Bindings/display/panel/kingdisplay,kd035g6-54nt.txt deleted file mode 100644 index fa9596082e..0000000000 --- a/dts/Bindings/display/panel/kingdisplay,kd035g6-54nt.txt +++ /dev/null @@ -1,42 +0,0 @@ -King Display KD035G6-54NT 3.5" (320x240 pixels) 24-bit TFT LCD panel - -Required properties: -- compatible: should be "kingdisplay,kd035g6-54nt" -- power-supply: See panel-common.txt -- reset-gpios: See panel-common.txt - -Optional properties: -- backlight: see panel-common.txt - -The generic bindings for the SPI slaves documented in [1] also apply. - -The device node can contain one 'port' child node with one child -'endpoint' node, according to the bindings defined in [2]. This -node should describe panel's video bus. - -[1]: Documentation/devicetree/bindings/spi/spi-bus.txt -[2]: Documentation/devicetree/bindings/graph.txt - -Example: - -&spi { - panel@0 { - compatible = "kingdisplay,kd035g6-54nt"; - reg = <0>; - - spi-max-frequency = <3125000>; - spi-3wire; - spi-cs-high; - - reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>; - - backlight = <&backlight>; - power-supply = <&ldo6>; - - port { - panel_input: endpoint { - remote-endpoint = <&panel_output>; - }; - }; - }; -}; diff --git a/dts/Bindings/display/panel/kingdisplay,kd035g6-54nt.yaml b/dts/Bindings/display/panel/kingdisplay,kd035g6-54nt.yaml new file mode 100644 index 0000000000..b4be9bd8dd --- /dev/null +++ b/dts/Bindings/display/panel/kingdisplay,kd035g6-54nt.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/kingdisplay,kd035g6-54nt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: King Display KD035G6-54NT 3.5" (320x240 pixels) 24-bit TFT LCD panel + +maintainers: + - Paul Cercueil <paul@crapouillou.net> + +allOf: + - $ref: panel-common.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + const: kingdisplay,kd035g6-54nt + + backlight: true + port: true + power-supply: true + reg: true + reset-gpios: true + + spi-3wire: true + +required: + - compatible + - power-supply + - reset-gpios + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "kingdisplay,kd035g6-54nt"; + reg = <0>; + + spi-max-frequency = <3125000>; + spi-3wire; + + reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>; + + backlight = <&backlight>; + power-supply = <&ldo6>; + + port { + panel_input: endpoint { + remote-endpoint = <&panel_output>; + }; + }; + }; + }; + +... diff --git a/dts/Bindings/display/panel/kingdisplay,kd097d04.txt b/dts/Bindings/display/panel/kingdisplay,kd097d04.txt deleted file mode 100644 index cfefff6886..0000000000 --- a/dts/Bindings/display/panel/kingdisplay,kd097d04.txt +++ /dev/null @@ -1,22 +0,0 @@ -Kingdisplay KD097D04 9.7" 1536x2048 TFT LCD panel - -Required properties: -- compatible: should be "kingdisplay,kd097d04" -- reg: DSI virtual channel of the peripheral -- power-supply: phandle of the regulator that provides the supply voltage -- enable-gpios: panel enable gpio - -Optional properties: -- backlight: phandle of the backlight device attached to the panel - -Example: - - &mipi_dsi { - panel@0 { - compatible = "kingdisplay,kd097d04"; - reg = <0>; - power-supply = <...>; - backlight = <&backlight>; - enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; - }; - }; diff --git a/dts/Bindings/display/panel/leadtek,ltk035c5444t.yaml b/dts/Bindings/display/panel/leadtek,ltk035c5444t.yaml new file mode 100644 index 0000000000..7a55961e1a --- /dev/null +++ b/dts/Bindings/display/panel/leadtek,ltk035c5444t.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/leadtek,ltk035c5444t.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Leadtek ltk035c5444t 3.5" (640x480 pixels) 24-bit IPS LCD panel + +maintainers: + - Paul Cercueil <paul@crapouillou.net> + - Christophe Branchereau <cbranchereau@gmail.com> + +allOf: + - $ref: panel-common.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + const: leadtek,ltk035c5444t + + spi-3wire: true + +required: + - compatible + - reg + - port + - power-supply + - reset-gpios + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "leadtek,ltk035c5444t"; + reg = <0>; + + spi-3wire; + spi-max-frequency = <3125000>; + + reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>; + + backlight = <&backlight>; + power-supply = <&vcc>; + + port { + panel_input: endpoint { + remote-endpoint = <&panel_output>; + }; + }; + }; + }; diff --git a/dts/Bindings/display/panel/leadtek,ltk050h3146w.yaml b/dts/Bindings/display/panel/leadtek,ltk050h3146w.yaml new file mode 100644 index 0000000000..a40ab887ad --- /dev/null +++ b/dts/Bindings/display/panel/leadtek,ltk050h3146w.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/leadtek,ltk050h3146w.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Leadtek LTK050H3146W 5.0in 720x1280 DSI panel + +maintainers: + - Quentin Schulz <quentin.schulz@theobroma-systems.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + enum: + - leadtek,ltk050h3146w + - leadtek,ltk050h3146w-a2 + - leadtek,ltk050h3148w + reg: true + backlight: true + reset-gpios: true + iovcc-supply: + description: regulator that supplies the iovcc voltage + vci-supply: + description: regulator that supplies the vci voltage + +required: + - compatible + - reg + - backlight + - iovcc-supply + - vci-supply + +additionalProperties: false + +examples: + - | + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "leadtek,ltk050h3146w"; + reg = <0>; + backlight = <&backlight>; + iovcc-supply = <&vcc_1v8>; + vci-supply = <&vcc3v3_lcd>; + }; + }; + +... diff --git a/dts/Bindings/display/panel/leadtek,ltk500hd1829.yaml b/dts/Bindings/display/panel/leadtek,ltk500hd1829.yaml index b900973b5f..c5944b4d63 100644 --- a/dts/Bindings/display/panel/leadtek,ltk500hd1829.yaml +++ b/dts/Bindings/display/panel/leadtek,ltk500hd1829.yaml @@ -19,9 +19,9 @@ properties: backlight: true reset-gpios: true iovcc-supply: - description: regulator that supplies the iovcc voltage + description: regulator that supplies the iovcc voltage vcc-supply: - description: regulator that supplies the vcc voltage + description: regulator that supplies the vcc voltage required: - compatible diff --git a/dts/Bindings/display/panel/lg,acx467akm-7.txt b/dts/Bindings/display/panel/lg,acx467akm-7.txt deleted file mode 100644 index fc1e1b325e..0000000000 --- a/dts/Bindings/display/panel/lg,acx467akm-7.txt +++ /dev/null @@ -1,7 +0,0 @@ -LG ACX467AKM-7 4.95" 1080×1920 LCD Panel - -Required properties: -- compatible: must be "lg,acx467akm-7" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/dts/Bindings/display/panel/lg,ld070wx3-sl01.txt b/dts/Bindings/display/panel/lg,ld070wx3-sl01.txt deleted file mode 100644 index 5e649cb9aa..0000000000 --- a/dts/Bindings/display/panel/lg,ld070wx3-sl01.txt +++ /dev/null @@ -1,7 +0,0 @@ -LG Corporation 7" WXGA TFT LCD panel - -Required properties: -- compatible: should be "lg,ld070wx3-sl01" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/dts/Bindings/display/panel/lg,lg4573.txt b/dts/Bindings/display/panel/lg,lg4573.txt deleted file mode 100644 index 824441f4e9..0000000000 --- a/dts/Bindings/display/panel/lg,lg4573.txt +++ /dev/null @@ -1,19 +0,0 @@ -LG LG4573 TFT Liquid Crystal Display with SPI control bus - -Required properties: - - compatible: "lg,lg4573" - - reg: address of the panel on the SPI bus - -The panel must obey rules for SPI slave device specified in document [1]. - -[1]: Documentation/devicetree/bindings/spi/spi-bus.txt - -Example: - - lcd_panel: display@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "lg,lg4573"; - spi-max-frequency = <10000000>; - reg = <0>; - }; diff --git a/dts/Bindings/display/panel/lg,lg4573.yaml b/dts/Bindings/display/panel/lg,lg4573.yaml new file mode 100644 index 0000000000..ee357e139a --- /dev/null +++ b/dts/Bindings/display/panel/lg,lg4573.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/lg,lg4573.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LG LG4573 TFT Liquid Crystal Display with SPI control bus + +description: | + The panel must obey the rules for a SPI slave device as specified in + spi/spi-controller.yaml + +maintainers: + - Heiko Schocher <hs@denx.de> + +allOf: + - $ref: panel-common.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + const: lg,lg4573 + + reg: true + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + lcd_panel: display@0 { + compatible = "lg,lg4573"; + spi-max-frequency = <10000000>; + reg = <0>; + }; + }; + +... diff --git a/dts/Bindings/display/panel/lg,lh500wx1-sd03.txt b/dts/Bindings/display/panel/lg,lh500wx1-sd03.txt deleted file mode 100644 index a04fd2b2e7..0000000000 --- a/dts/Bindings/display/panel/lg,lh500wx1-sd03.txt +++ /dev/null @@ -1,7 +0,0 @@ -LG Corporation 5" HD TFT LCD panel - -Required properties: -- compatible: should be "lg,lh500wx1-sd03" - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/dts/Bindings/display/panel/lgphilips,lb035q02.txt b/dts/Bindings/display/panel/lgphilips,lb035q02.txt deleted file mode 100644 index 1a1e653e54..0000000000 --- a/dts/Bindings/display/panel/lgphilips,lb035q02.txt +++ /dev/null @@ -1,33 +0,0 @@ -LG.Philips LB035Q02 Panel -========================= - -Required properties: -- compatible: "lgphilips,lb035q02" -- enable-gpios: panel enable gpio - -Optional properties: -- label: a symbolic name for the panel - -Required nodes: -- Video port for DPI input - -Example -------- - -lcd-panel: panel@0 { - compatible = "lgphilips,lb035q02"; - reg = <0>; - spi-max-frequency = <100000>; - spi-cpol; - spi-cpha; - - label = "lcd"; - - enable-gpios = <&gpio7 7 0>; - - port { - lcd_in: endpoint { - remote-endpoint = <&dpi_out>; - }; - }; -}; diff --git a/dts/Bindings/display/panel/lgphilips,lb035q02.yaml b/dts/Bindings/display/panel/lgphilips,lb035q02.yaml new file mode 100644 index 0000000000..628c4b8981 --- /dev/null +++ b/dts/Bindings/display/panel/lgphilips,lb035q02.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/lgphilips,lb035q02.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LG.Philips LB035Q02 Panel + +maintainers: + - Tomi Valkeinen <tomi.valkeinen@ti.com> + +allOf: + - $ref: panel-common.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + const: lgphilips,lb035q02 + + label: true + enable-gpios: true + port: true + + spi-cpha: true + spi-cpol: true + +required: + - compatible + - enable-gpios + - port + +unevaluatedProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + panel: panel@0 { + compatible = "lgphilips,lb035q02"; + reg = <0>; + spi-max-frequency = <100000>; + spi-cpol; + spi-cpha; + + label = "lcd"; + + enable-gpios = <&gpio7 7 0>; + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + }; + }; + +... diff --git a/dts/Bindings/display/panel/lvds.yaml b/dts/Bindings/display/panel/lvds.yaml deleted file mode 100644 index 946dd35425..0000000000 --- a/dts/Bindings/display/panel/lvds.yaml +++ /dev/null @@ -1,115 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/display/panel/lvds.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: LVDS Display Panel - -maintainers: - - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> - - Thierry Reding <thierry.reding@gmail.com> - -description: |+ - LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A. Multiple - incompatible data link layers have been used over time to transmit image data - to LVDS panels. This bindings supports display panels compatible with the - following specifications. - - [JEIDA] "Digital Interface Standards for Monitor", JEIDA-59-1999, February - 1999 (Version 1.0), Japan Electronic Industry Development Association (JEIDA) - [LDI] "Open LVDS Display Interface", May 1999 (Version 0.95), National - Semiconductor - [VESA] "VESA Notebook Panel Standard", October 2007 (Version 1.0), Video - Electronics Standards Association (VESA) - - Device compatible with those specifications have been marketed under the - FPD-Link and FlatLink brands. - -allOf: - - $ref: panel-common.yaml# - -properties: - compatible: - contains: - const: panel-lvds - description: - Shall contain "panel-lvds" in addition to a mandatory panel-specific - compatible string defined in individual panel bindings. The "panel-lvds" - value shall never be used on its own. - - data-mapping: - enum: - - jeida-18 - - jeida-24 - - vesa-24 - description: | - The color signals mapping order. - - LVDS data mappings are defined as follows. - - - "jeida-18" - 18-bit data mapping compatible with the [JEIDA], [LDI] and - [VESA] specifications. Data are transferred as follows on 3 LVDS lanes. - - Slot 0 1 2 3 4 5 6 - ________________ _________________ - Clock \_______________________/ - ______ ______ ______ ______ ______ ______ ______ - DATA0 ><__G0__><__R5__><__R4__><__R3__><__R2__><__R1__><__R0__>< - DATA1 ><__B1__><__B0__><__G5__><__G4__><__G3__><__G2__><__G1__>< - DATA2 ><_CTL2_><_CTL1_><_CTL0_><__B5__><__B4__><__B3__><__B2__>< - - - "jeida-24" - 24-bit data mapping compatible with the [DSIM] and [LDI] - specifications. Data are transferred as follows on 4 LVDS lanes. - - Slot 0 1 2 3 4 5 6 - ________________ _________________ - Clock \_______________________/ - ______ ______ ______ ______ ______ ______ ______ - DATA0 ><__G2__><__R7__><__R6__><__R5__><__R4__><__R3__><__R2__>< - DATA1 ><__B3__><__B2__><__G7__><__G6__><__G5__><__G4__><__G3__>< - DATA2 ><_CTL2_><_CTL1_><_CTL0_><__B7__><__B6__><__B5__><__B4__>< - DATA3 ><_CTL3_><__B1__><__B0__><__G1__><__G0__><__R1__><__R0__>< - - - "vesa-24" - 24-bit data mapping compatible with the [VESA] specification. - Data are transferred as follows on 4 LVDS lanes. - - Slot 0 1 2 3 4 5 6 - ________________ _________________ - Clock \_______________________/ - ______ ______ ______ ______ ______ ______ ______ - DATA0 ><__G0__><__R5__><__R4__><__R3__><__R2__><__R1__><__R0__>< - DATA1 ><__B1__><__B0__><__G5__><__G4__><__G3__><__G2__><__G1__>< - DATA2 ><_CTL2_><_CTL1_><_CTL0_><__B5__><__B4__><__B3__><__B2__>< - DATA3 ><_CTL3_><__B7__><__B6__><__G7__><__G6__><__R7__><__R6__>< - - Control signals are mapped as follows. - - CTL0: HSync - CTL1: VSync - CTL2: Data Enable - CTL3: 0 - - data-mirror: - type: boolean - description: - If set, reverse the bit order described in the data mappings below on all - data lanes, transmitting bits for slots 6 to 0 instead of 0 to 6. - - port: true - ports: true - -required: - - compatible - - data-mapping - - width-mm - - height-mm - - panel-timing - -oneOf: - - required: - - port - - required: - - ports - -... diff --git a/dts/Bindings/display/panel/mantix,mlaf057we51-x.yaml b/dts/Bindings/display/panel/mantix,mlaf057we51-x.yaml new file mode 100644 index 0000000000..74ff772973 --- /dev/null +++ b/dts/Bindings/display/panel/mantix,mlaf057we51-x.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/mantix,mlaf057we51-x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mantix MLAF057WE51-X 5.7" 720x1440 TFT LCD panel + +maintainers: + - Guido Günther <agx@sigxcpu.org> + +description: + Mantix MLAF057WE51 X is a 720x1440 TFT LCD panel connected using + a MIPI-DSI video interface. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + enum: + - mantix,mlaf057we51-x + - ys,ys57pss36bh5gq + + port: true + reg: + maxItems: 1 + description: DSI virtual channel + + avdd-supply: + description: Positive analog power supply + + avee-supply: + description: Negative analog power supply + + vddi-supply: + description: 1.8V I/O voltage supply + + reset-gpios: true + + mantix,tp-rstn-gpios: + maxItems: 1 + description: second reset line that triggers DSI config load + + backlight: true + +required: + - compatible + - reg + - avdd-supply + - avee-supply + - vddi-supply + - reset-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "mantix,mlaf057we51-x"; + reg = <0>; + avdd-supply = <®_avdd>; + avee-supply = <®_avee>; + vddi-supply = <®_1v8_p>; + reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; + mantix,tp-rstn-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; + backlight = <&backlight>; + }; + }; + +... diff --git a/dts/Bindings/display/panel/mitsubishi,aa104xd12.yaml b/dts/Bindings/display/panel/mitsubishi,aa104xd12.yaml index b5e7ee230f..3623ffa651 100644 --- a/dts/Bindings/display/panel/mitsubishi,aa104xd12.yaml +++ b/dts/Bindings/display/panel/mitsubishi,aa104xd12.yaml @@ -11,13 +11,23 @@ maintainers: - Thierry Reding <thierry.reding@gmail.com> allOf: - - $ref: lvds.yaml# + - $ref: panel-common.yaml# + - $ref: /schemas/display/lvds.yaml# + +select: + properties: + compatible: + contains: + const: mitsubishi,aa104xd12 + + required: + - compatible properties: compatible: items: - const: mitsubishi,aa104xd12 - - {} # panel-lvds, but not listed here to avoid false select + - const: panel-lvds vcc-supply: description: Reference to the regulator powering the panel VCC pins. @@ -39,6 +49,11 @@ additionalProperties: false required: - compatible - vcc-supply + - data-mapping + - width-mm + - height-mm + - panel-timing + - port examples: - |+ diff --git a/dts/Bindings/display/panel/mitsubishi,aa121td01.yaml b/dts/Bindings/display/panel/mitsubishi,aa121td01.yaml index 977c50a85b..37f01d847a 100644 --- a/dts/Bindings/display/panel/mitsubishi,aa121td01.yaml +++ b/dts/Bindings/display/panel/mitsubishi,aa121td01.yaml @@ -11,13 +11,23 @@ maintainers: - Thierry Reding <thierry.reding@gmail.com> allOf: - - $ref: lvds.yaml# + - $ref: panel-common.yaml# + - $ref: /schemas/display/lvds.yaml# + +select: + properties: + compatible: + contains: + const: mitsubishi,aa121td01 + + required: + - compatible properties: compatible: items: - const: mitsubishi,aa121td01 - - {} # panel-lvds, but not listed here to avoid false select + - const: panel-lvds vcc-supply: description: Reference to the regulator powering the panel VCC pins. @@ -39,6 +49,11 @@ additionalProperties: false required: - compatible - vcc-supply + - data-mapping + - width-mm + - height-mm + - panel-timing + - port examples: - |+ diff --git a/dts/Bindings/display/panel/nec,nl8048hl11.yaml b/dts/Bindings/display/panel/nec,nl8048hl11.yaml index aa788eaa2f..accf933d6e 100644 --- a/dts/Bindings/display/panel/nec,nl8048hl11.yaml +++ b/dts/Bindings/display/panel/nec,nl8048hl11.yaml @@ -15,6 +15,7 @@ maintainers: allOf: - $ref: panel-common.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# properties: compatible: @@ -34,13 +35,13 @@ required: - reset-gpios - port -additionalProperties: false +unevaluatedProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> - spi0 { + spi { #address-cells = <1>; #size-cells = <0>; diff --git a/dts/Bindings/display/panel/newvision,nv3051d.yaml b/dts/Bindings/display/panel/newvision,nv3051d.yaml new file mode 100644 index 0000000000..7a634fbc46 --- /dev/null +++ b/dts/Bindings/display/panel/newvision,nv3051d.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/newvision,nv3051d.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NewVision NV3051D based LCD panel + +description: | + The NewVision NV3051D is a driver chip used to drive DSI panels. + +maintainers: + - Chris Morgan <macromorgan@hotmail.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - enum: + - anbernic,rg351v-panel + - anbernic,rg353p-panel + - powkiddy,rk2023-panel + - const: newvision,nv3051d + + reg: true + backlight: true + port: true + reset-gpios: + description: Active low reset GPIO + vdd-supply: true + +required: + - compatible + - reg + - backlight + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "anbernic,rg353p-panel", "newvision,nv3051d"; + reg = <0>; + backlight = <&backlight>; + reset-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>; + vdd-supply = <&vcc3v3_lcd>; + + port { + mipi_in_panel: endpoint { + remote-endpoint = <&mipi_out_panel>; + }; + }; + }; + }; + +... diff --git a/dts/Bindings/display/panel/novatek,nt35510.yaml b/dts/Bindings/display/panel/novatek,nt35510.yaml index 73d2ff3baa..bc92928c80 100644 --- a/dts/Bindings/display/panel/novatek,nt35510.yaml +++ b/dts/Bindings/display/panel/novatek,nt35510.yaml @@ -25,9 +25,9 @@ properties: reg: true reset-gpios: true vdd-supply: - description: regulator that supplies the vdd voltage + description: regulator that supplies the vdd voltage vddi-supply: - description: regulator that supplies the vddi voltage + description: regulator that supplies the vddi voltage backlight: true required: diff --git a/dts/Bindings/display/panel/novatek,nt35950.yaml b/dts/Bindings/display/panel/novatek,nt35950.yaml new file mode 100644 index 0000000000..377a05d48a --- /dev/null +++ b/dts/Bindings/display/panel/novatek,nt35950.yaml @@ -0,0 +1,106 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/novatek,nt35950.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Novatek NT35950-based display panels + +maintainers: + - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> + +description: | + The nt35950 IC from Novatek is a Driver IC used to drive MIPI-DSI panels, + with Static RAM for content retention in command mode and also supports + video mode with VESA Frame Buffer Compression or Display Stream Compression + on single, or dual dsi port(s). + This DDIC is also capable of upscaling an input image to the panel's native + resolution, for example it can upscale a 1920x1080 input to 3840x2160 with + either bilinear interpolation or pixel duplication. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - enum: + - sharp,ls055d1sx04 + - const: novatek,nt35950 + description: This indicates the panel manufacturer of the panel + that is in turn using the NT35950 panel driver. The compatible + string determines how the NT35950 panel driver shall be configured + to work with the indicated panel. The novatek,nt35950 compatible shall + always be provided as a fallback. + + reset-gpios: + maxItems: 1 + description: phandle of gpio for reset line - This should be 8mA, gpio + can be configured using mux, pinctrl, pinctrl-names (active high) + + avdd-supply: + description: positive boost supply regulator + avee-supply: + description: negative boost supply regulator + dvdd-supply: + description: regulator that supplies the digital voltage + vddio-supply: + description: regulator that supplies the I/O voltage + + backlight: true + ports: true + reg: true + +required: + - compatible + - reg + - reset-gpios + - avdd-supply + - avee-supply + - dvdd-supply + - vddio-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi0 { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "sharp,ls055d1sx04", "novatek,nt35950"; + reg = <0>; + + backlight = <&pmi8998_wled>; + reset-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>; + + avdd-supply = <&lab>; + avee-supply = <&ibb>; + dvdd-supply = <&disp_dvdd_vreg>; + vddio-supply = <&vreg_l14a_1p85>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + panel_in0: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + panel_in1: endpoint { + remote-endpoint = <&dsi1_out>; + }; + }; + }; + }; + }; + +... diff --git a/dts/Bindings/display/panel/novatek,nt36523.yaml b/dts/Bindings/display/panel/novatek,nt36523.yaml new file mode 100644 index 0000000000..5f7e4c4860 --- /dev/null +++ b/dts/Bindings/display/panel/novatek,nt36523.yaml @@ -0,0 +1,91 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/novatek,nt36523.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Novatek NT36523 based DSI display Panels + +maintainers: + - Jianhua Lu <lujianhua000@gmail.com> + +description: | + The Novatek NT36523 is a generic DSI Panel IC used to drive dsi + panels. Support video mode panels from China Star Optoelectronics + Technology (CSOT) and BOE Technology. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - xiaomi,elish-boe-nt36523 + - xiaomi,elish-csot-nt36523 + - const: novatek,nt36523 + - items: + - enum: + - lenovo,j606f-boe-nt36523w + - const: novatek,nt36523w + + reset-gpios: + maxItems: 1 + description: phandle of gpio for reset line - This should be 8mA + + vddio-supply: + description: regulator that supplies the I/O voltage + + reg: true + ports: true + rotation: true + backlight: true + +required: + - compatible + - reg + - vddio-supply + - reset-gpios + - ports + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "xiaomi,elish-csot-nt36523", "novatek,nt36523"; + reg = <0>; + + vddio-supply = <&vreg_l14a_1p88>; + reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>; + backlight = <&backlight>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + panel_in_0: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1{ + reg = <1>; + panel_in_1: endpoint { + remote-endpoint = <&dsi1_out>; + }; + }; + }; + }; + }; + +... diff --git a/dts/Bindings/display/panel/novatek,nt36672a.yaml b/dts/Bindings/display/panel/novatek,nt36672a.yaml new file mode 100644 index 0000000000..ae821f465e --- /dev/null +++ b/dts/Bindings/display/panel/novatek,nt36672a.yaml @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/novatek,nt36672a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Novatek NT36672A based DSI display Panels + +maintainers: + - Sumit Semwal <sumit.semwal@linaro.org> + +description: | + The nt36672a IC from Novatek is a generic DSI Panel IC used to drive dsi + panels. + Right now, support is added only for a Tianma FHD+ LCD display panel with a + resolution of 1080x2246. It is a video mode DSI panel. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - enum: + - tianma,fhd-video + - const: novatek,nt36672a + description: This indicates the panel manufacturer of the panel that is + in turn using the NT36672A panel driver. This compatible string + determines how the NT36672A panel driver is configured for the indicated + panel. The novatek,nt36672a compatible shall always be provided as a fallback. + + reset-gpios: + maxItems: 1 + description: phandle of gpio for reset line - This should be 8mA, gpio + can be configured using mux, pinctrl, pinctrl-names (active high) + + vddio-supply: + description: phandle of the regulator that provides the supply voltage + Power IC supply + + vddpos-supply: + description: phandle of the positive boost supply regulator + + vddneg-supply: + description: phandle of the negative boost supply regulator + + reg: true + port: true + backlight: true + +required: + - compatible + - reg + - vddio-supply + - vddpos-supply + - vddneg-supply + - reset-gpios + - port + +unevaluatedProperties: false + +examples: + - |+ + #include <dt-bindings/gpio/gpio.h> + + dsi0 { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "tianma,fhd-video", "novatek,nt36672a"; + reg = <0>; + vddio-supply = <&vreg_l14a_1p88>; + vddpos-supply = <&lab>; + vddneg-supply = <&ibb>; + + backlight = <&pmi8998_wled>; + reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; + + port { + tianma_nt36672a_in_0: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; + +... diff --git a/dts/Bindings/display/panel/olimex,lcd-olinuxino.txt b/dts/Bindings/display/panel/olimex,lcd-olinuxino.txt deleted file mode 100644 index a89f9c830a..0000000000 --- a/dts/Bindings/display/panel/olimex,lcd-olinuxino.txt +++ /dev/null @@ -1,42 +0,0 @@ -Binding for Olimex Ltd. LCD-OLinuXino bridge panel. - -This device can be used as bridge between a host controller and LCD panels. -Currently supported LCDs are: - - LCD-OLinuXino-4.3TS - - LCD-OLinuXino-5 - - LCD-OLinuXino-7 - - LCD-OLinuXino-10 - -The panel itself contains: - - AT24C16C EEPROM holding panel identification and timing requirements - - AR1021 resistive touch screen controller (optional) - - FT5x6 capacitive touch screnn controller (optional) - - GT911/GT928 capacitive touch screen controller (optional) - -The above chips share same I2C bus. The EEPROM is factory preprogrammed with -device information (id, serial, etc.) and timing requirements. - -Touchscreen bingings can be found in these files: - - input/touchscreen/goodix.txt - - input/touchscreen/edt-ft5x06.txt - - input/touchscreen/ar1021.txt - -Required properties: - - compatible: should be "olimex,lcd-olinuxino" - - reg: address of the configuration EEPROM, should be <0x50> - - power-supply: phandle of the regulator that provides the supply voltage - -Optional properties: - - enable-gpios: GPIO pin to enable or disable the panel - - backlight: phandle of the backlight device attacked to the panel - -Example: -&i2c2 { - panel@50 { - compatible = "olimex,lcd-olinuxino"; - reg = <0x50>; - power-supply = <®_vcc5v0>; - enable-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; - backlight = <&backlight>; - }; -}; diff --git a/dts/Bindings/display/panel/olimex,lcd-olinuxino.yaml b/dts/Bindings/display/panel/olimex,lcd-olinuxino.yaml new file mode 100644 index 0000000000..72463795e4 --- /dev/null +++ b/dts/Bindings/display/panel/olimex,lcd-olinuxino.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/olimex,lcd-olinuxino.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Olimex Ltd. LCD-OLinuXino bridge panel. + +maintainers: + - Stefan Mavrodiev <stefan@olimex.com> + +description: | + This device can be used as bridge between a host controller and LCD panels. + Currently supported LCDs are: + - LCD-OLinuXino-4.3TS + - LCD-OLinuXino-5 + - LCD-OLinuXino-7 + - LCD-OLinuXino-10 + + The panel itself contains: + - AT24C16C EEPROM holding panel identification and timing requirements + - AR1021 resistive touch screen controller (optional) + - FT5x6 capacitive touch screen controller (optional) + - GT911/GT928 capacitive touch screen controller (optional) + + The above chips share same I2C bus. The EEPROM is factory preprogrammed with + device information (id, serial, etc.) and timing requirements. + + Touchscreen bingings can be found in these files: + - input/touchscreen/goodix.yaml + - input/touchscreen/edt-ft5x06.txt + - input/touchscreen/ar1021.txt + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: olimex,lcd-olinuxino + + backlight: true + enable-gpios: true + power-supply: true + reg: true + +required: + - compatible + - reg + - power-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + panel@50 { + compatible = "olimex,lcd-olinuxino"; + reg = <0x50>; + power-supply = <®_vcc5v0>; + enable-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; + backlight = <&backlight>; + }; + }; + +... diff --git a/dts/Bindings/display/panel/orisetech,otm8009a.yaml b/dts/Bindings/display/panel/orisetech,otm8009a.yaml index 4b6dda6dbc..1e4f140f48 100644 --- a/dts/Bindings/display/panel/orisetech,otm8009a.yaml +++ b/dts/Bindings/display/panel/orisetech,otm8009a.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/display/panel/orisetech,otm8009a.yaml# @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Orise Tech OTM8009A 3.97" 480x800 TFT LCD panel (MIPI-DSI video mode) maintainers: - - Philippe CORNU <philippe.cornu@st.com> + - Philippe CORNU <philippe.cornu@foss.st.com> description: | The Orise Tech OTM8009A is a 3.97" 480x800 TFT LCD panel connected using @@ -50,4 +50,3 @@ examples: }; }; ... - diff --git a/dts/Bindings/display/panel/osddisplays,osd101t2587-53ts.txt b/dts/Bindings/display/panel/osddisplays,osd101t2587-53ts.txt deleted file mode 100644 index 9d88e96003..0000000000 --- a/dts/Bindings/display/panel/osddisplays,osd101t2587-53ts.txt +++ /dev/null @@ -1,14 +0,0 @@ -One Stop Displays OSD101T2587-53TS 10.1" 1920x1200 panel - -The panel is similar to OSD101T2045-53TS, but it needs additional -MIPI_DSI_TURN_ON_PERIPHERAL message from the host. - -Required properties: -- compatible: should be "osddisplays,osd101t2587-53ts" -- power-supply: as specified in the base binding - -Optional properties: -- backlight: as specified in the base binding - -This binding is compatible with the simple-panel binding, which is specified -in simple-panel.txt in this directory. diff --git a/dts/Bindings/display/panel/panel-common.yaml b/dts/Bindings/display/panel/panel-common.yaml index ed051ba120..0a57a31f4f 100644 --- a/dts/Bindings/display/panel/panel-common.yaml +++ b/dts/Bindings/display/panel/panel-common.yaml @@ -12,7 +12,7 @@ maintainers: description: | This document defines device tree properties common to several classes of - display panels. It doesn't constitue a device tree binding specification by + display panels. It doesn't constitute a device tree binding specification by itself but is meant to be referenced by device tree bindings. When referenced from panel device tree bindings the properties defined in this @@ -48,9 +48,8 @@ properties: rotation: description: Display rotation in degrees counter clockwise (0,90,180,270) - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 90, 180, 270 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 90, 180, 270] # Display Timings panel-timing: @@ -58,29 +57,18 @@ properties: Most display panels are restricted to a single resolution and require specific display timings. The panel-timing subnode expresses those timings. - allOf: - - $ref: panel-timing.yaml# + $ref: panel-timing.yaml# display-timings: description: - Some display panels supports several resolutions with different timing. + Some display panels support several resolutions with different timings. The display-timings bindings supports specifying several timings and - optional specify which is the native mode. - allOf: - - $ref: display-timings.yaml# + optionally specifying which is the native mode. + $ref: display-timings.yaml# # Connectivity port: - type: object - - ports: - type: object - description: - Panels receive video data through one or multiple connections. While - the nature of those connections is specific to the panel type, the - connectivity is expressed in a standard fashion using ports as specified - in the device graph bindings defined in - Documentation/devicetree/bindings/graph.txt. + $ref: /schemas/graph.yaml#/properties/port ddc-i2c-bus: $ref: /schemas/types.yaml#/definitions/phandle @@ -96,6 +84,12 @@ properties: (hot plug detect) signal, but the signal isn't hooked up so we should hardcode the max delay from the panel spec when powering up the panel. + hpd-gpios: + maxItems: 1 + description: + If Hot Plug Detect (HPD) is connected to a GPIO in the system rather + than a dedicated HPD pin the pin can be specified here. + # Control I/Os # Many display panels can be controlled through pins driven by GPIOs. The nature @@ -124,6 +118,13 @@ properties: while active. Active high reset signals can be supported by inverting the GPIO specifier polarity flag. + te-gpios: + maxItems: 1 + description: + GPIO spec for the tearing effect synchronization signal. + The tearing effect signal is active high. Active low signals can be + supported by inverting the GPIO specifier polarity flag. + # Power power-supply: description: @@ -153,4 +154,6 @@ dependencies: width-mm: [ height-mm ] height-mm: [ width-mm ] +additionalProperties: true + ... diff --git a/dts/Bindings/display/panel/panel-dpi.yaml b/dts/Bindings/display/panel/panel-dpi.yaml index 0cd74c8dab..dae0676b5c 100644 --- a/dts/Bindings/display/panel/panel-dpi.yaml +++ b/dts/Bindings/display/panel/panel-dpi.yaml @@ -40,7 +40,7 @@ additionalProperties: false examples: - | panel { - compatible = "osddisplays,osd057T0559-34ts", "panel-dpi"; + compatible = "startek,startek-kd050c", "panel-dpi"; label = "osddisplay"; power-supply = <&vcc_supply>; backlight = <&backlight>; diff --git a/dts/Bindings/display/panel/panel-dsi-cm.txt b/dts/Bindings/display/panel/panel-dsi-cm.txt deleted file mode 100644 index dce48eb9db..0000000000 --- a/dts/Bindings/display/panel/panel-dsi-cm.txt +++ /dev/null @@ -1,29 +0,0 @@ -Generic MIPI DSI Command Mode Panel -=================================== - -Required properties: -- compatible: "panel-dsi-cm" - -Optional properties: -- label: a symbolic name for the panel -- reset-gpios: panel reset gpio -- te-gpios: panel TE gpio - -Required nodes: -- Video port for DSI input - -Example -------- - -lcd0: display { - compatible = "tpo,taal", "panel-dsi-cm"; - label = "lcd0"; - - reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; - - port { - lcd0_in: endpoint { - remote-endpoint = <&dsi1_out_ep>; - }; - }; -}; diff --git a/dts/Bindings/display/panel/panel-dsi-cm.yaml b/dts/Bindings/display/panel/panel-dsi-cm.yaml new file mode 100644 index 0000000000..f8dc9929e8 --- /dev/null +++ b/dts/Bindings/display/panel/panel-dsi-cm.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/panel-dsi-cm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: DSI command mode panels + +maintainers: + - Tomi Valkeinen <tomi.valkeinen@ti.com> + - Sebastian Reichel <sre@kernel.org> + +description: | + This binding file is a collection of the DSI panels that + are usually driven in command mode. If no backlight is + referenced via the optional backlight property, the DSI + panel is assumed to have native backlight support. + The panel may use an OF graph binding for the association + to the display, or it may be a direct child node of the + display. + +allOf: + - $ref: panel-common.yaml# + +properties: + + compatible: + items: + - enum: + - motorola,droid4-panel # Panel from Motorola Droid4 phone + - nokia,himalaya # Panel from Nokia N950 phone + - tpo,taal # Panel from OMAP4 SDP board + - const: panel-dsi-cm # Generic DSI command mode panel compatible fallback + + reg: + maxItems: 1 + description: DSI virtual channel + + vddi-supply: + description: + Display panels require power to be supplied. While several panels need + more than one power supply with panel-specific constraints governing the + order and timings of the power supplies, in many cases a single power + supply is sufficient, either because the panel has a single power rail, or + because all its power rails can be driven by the same supply. In that case + the vddi-supply property specifies the supply powering the panel as a + phandle to a regulator. + + vpnl-supply: + description: + When the display panel needs a second power supply, this property can be + used in addition to vddi-supply. Both supplies will be enabled at the + same time before the panel is being accessed. + + width-mm: true + height-mm: true + label: true + rotation: true + panel-timing: true + port: true + reset-gpios: true + te-gpios: true + backlight: true + +additionalProperties: false + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi-controller { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "tpo,taal", "panel-dsi-cm"; + reg = <0>; + reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; + }; + }; + +... diff --git a/dts/Bindings/display/panel/panel-edp.yaml b/dts/Bindings/display/panel/panel-edp.yaml new file mode 100644 index 0000000000..bb0cf6827e --- /dev/null +++ b/dts/Bindings/display/panel/panel-edp.yaml @@ -0,0 +1,188 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/panel-edp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Probeable (via DP AUX / EDID) eDP Panels with simple poweron sequences + +maintainers: + - Douglas Anderson <dianders@chromium.org> + +description: | + This binding file can be used to indicate that an eDP panel is connected + to a Embedded DisplayPort AUX bus (see display/dp-aux-bus.yaml) without + actually specifying exactly what panel is connected. This is useful for + the case that more than one different panel could be connected to the + board, either for second-sourcing purposes or to support multiple SKUs + with different LCDs that hook up to a common board. + + As per above, a requirement for using this binding is that the panel is + represented under the DP AUX bus. This means that we can use any + information provided by the DP AUX bus (including the EDID) to identify + the panel. We can use this to identify display size, resolution, and + timings among other things. + + One piece of information about eDP panels that is typically _not_ + provided anywhere on the DP AUX bus is the power sequencing timings. + This is the reason why, historically, we've always had to explicitly + list eDP panels. We solve that here with two tricks. The "worst case" + power on timings for any panels expected to be connected to a board are + specified in these bindings. Once we've powered on, it's expected that + the operating system will lookup the panel in a table (based on EDID + information) to figure out other power sequencing timings. + + eDP panels in general can have somewhat arbitrary power sequencing + requirements. However, even though it's arbitrary in general, the + vast majority of panel datasheets have a power sequence diagram that + looks the exactly the same as every other panel. Each panel datasheet + cares about different timings in this diagram but the fact that the + diagram is so similar means we can come up with a single driver to + handle it. + + These diagrams all look roughly like this, sometimes labeled with + slightly different numbers / lines but all pretty much the same + sequence. This is because much of this diagram comes straight from + the eDP Standard. + + __________________________________________________ + Vdd ___/: :\____ / + _/ : : \_____/ + :<T1>:<T2>: :<--T10-->:<T11>:<T12>: + : +-----------------------+---------+---------+ + eDP -----------+ Black video | Src vid | Blk vid + + Display : +-----------------------+---------+---------+ + : _______________________:_________:_________: + HPD :<T3>| : : | + ___________| : : |_____________ + : : : : + Sink +-----------------------:---------:---------+ + AUX CH -----------+ AUX Ch operational : : +------------- + +-----------------------:---------:---------+ + : : : : + :<T4>: :<T7>: : : + Src main +------+------+--------------+---------+ + lnk data----------------+LnkTrn| Idle |Valid vid data| Idle/off+------------- + +------+------+--------------+---------+ + : <T5> :<-T6->:<-T8->: : + :__:<T9>: + LED_EN | | + _____________________________________| |____________________________ + : : + __________:__:_ + PWM | : : | + __________________________| : : |__________________________ + : : : : + _____________:__________:__:_:______ + Bklight ____/: : : : : :\____ + power _______/ :<---T13---->: : : :<T16>: \______________ + (Vbl) :<T17>:<---------T14--------->: :<-T15->:<T18>: + + The above looks fairly complex but, as per above, each panel only cares + about a subset of those timings. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: edp-panel + + hpd-reliable-delay-ms: + description: + A fixed amount of time that must be waited after powering on the + panel's power-supply before the HPD signal is a reliable way to know + when the AUX channel is ready. This is useful for panels that glitch + the HPD at the start of power-on. This value is not needed if HPD is + always reliable for all panels that might be connected. + + hpd-absent-delay-ms: + description: + The panel specifies that HPD will be asserted this many milliseconds + from power on (timing T3 in the diagram above). If we have no way to + measure HPD then a fixed delay of this many milliseconds can be used. + This can also be used as a timeout when waiting for HPD. Does not + include the hpd-reliable-delay, so if hpd-reliable-delay was 80 ms + and hpd-absent-delay was 200 ms then we'd do a fixed 80 ms delay and + then we know HPD would assert in the next 120 ms. This value is not + needed if HPD hooked up, either through a GPIO in the panel node or + hooked up directly to the eDP controller. + + backlight: true + enable-gpios: true + port: true + power-supply: true + no-hpd: true + hpd-gpios: true + +additionalProperties: false + +required: + - compatible + - power-supply + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + bridge@2d { + compatible = "ti,sn65dsi86"; + reg = <0x2d>; + + interrupt-parent = <&tlmm>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; + + enable-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>; + + vpll-supply = <&src_pp1800_s4a>; + vccio-supply = <&src_pp1800_s4a>; + vcca-supply = <&src_pp1200_l2a>; + vcc-supply = <&src_pp1200_l2a>; + + clocks = <&rpmhcc RPMH_LN_BB_CLK2>; + clock-names = "refclk"; + + no-hpd; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + sn65dsi86_out: endpoint { + remote-endpoint = <&panel_in_edp>; + }; + }; + }; + + aux-bus { + panel { + compatible = "edp-panel"; + power-supply = <&pp3300_dx_edp>; + backlight = <&backlight>; + hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>; + hpd-reliable-delay-ms = <15>; + + port { + panel_in_edp: endpoint { + remote-endpoint = <&sn65dsi86_out>; + }; + }; + }; + }; + }; + }; diff --git a/dts/Bindings/display/panel/panel-lvds.yaml b/dts/Bindings/display/panel/panel-lvds.yaml new file mode 100644 index 0000000000..9f1016551e --- /dev/null +++ b/dts/Bindings/display/panel/panel-lvds.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/panel-lvds.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic LVDS Display Panel + +maintainers: + - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> + - Thierry Reding <thierry.reding@gmail.com> + +allOf: + - $ref: panel-common.yaml# + - $ref: /schemas/display/lvds.yaml# + +select: + properties: + compatible: + contains: + const: panel-lvds + + not: + properties: + compatible: + contains: + enum: + - advantech,idk-1110wr + - advantech,idk-2121wr + - innolux,ee101ia-01d + - mitsubishi,aa104xd12 + - mitsubishi,aa121td01 + - sgd,gktw70sdae4se + + required: + - compatible + +properties: + compatible: + items: + - enum: + - auo,b101ew05 + # Chunghwa Picture Tubes Ltd. 7" WXGA (800x1280) TFT LCD LVDS panel + - chunghwa,claa070wp03xg + # HannStar Display Corp. HSD101PWW2 10.1" WXGA (1280x800) LVDS panel + - hannstar,hsd101pww2 + # Hydis Technologies 7" WXGA (800x1280) TFT LCD LVDS panel + - hydis,hv070wx2-1e0 + - tbs,a711-panel + + - const: panel-lvds + +unevaluatedProperties: false + +required: + - compatible + - data-mapping + - width-mm + - height-mm + - panel-timing + - port + +... diff --git a/dts/Bindings/display/panel/panel-mipi-dbi-spi.yaml b/dts/Bindings/display/panel/panel-mipi-dbi-spi.yaml new file mode 100644 index 0000000000..e808215cb3 --- /dev/null +++ b/dts/Bindings/display/panel/panel-mipi-dbi-spi.yaml @@ -0,0 +1,138 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/panel-mipi-dbi-spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MIPI DBI SPI Panel + +maintainers: + - Noralf Trønnes <noralf@tronnes.org> + +description: | + This binding is for display panels using a MIPI DBI compatible controller + in SPI mode. + + The MIPI Alliance Standard for Display Bus Interface defines the electrical + and logical interfaces for display controllers historically used in mobile + phones. The standard defines 4 display architecture types and this binding is + for type 1 which has full frame memory. There are 3 interface types in the + standard and type C is the serial interface. + + The standard defines the following interface signals for type C: + - Power: + - Vdd: Power supply for display module + Called power-supply in this binding. + - Vddi: Logic level supply for interface signals + Called io-supply in this binding. + - Interface: + - CSx: Chip select + - SCL: Serial clock + - Dout: Serial out + - Din: Serial in + - SDA: Bidrectional in/out + - D/CX: Data/command selection, high=data, low=command + Called dc-gpios in this binding. + - RESX: Reset when low + Called reset-gpios in this binding. + + The type C interface has 3 options: + + - Option 1: 9-bit mode and D/CX as the 9th bit + | Command | the next command or following data | + |<0><D7><D6><D5><D4><D3><D2><D1><D0>|<D/CX><D7><D6><D5><D4><D3><D2><D1><D0>| + + - Option 2: 16-bit mode and D/CX as a 9th bit + | Command or data | + |<X><X><X><X><X><X><X><D/CX><D7><D6><D5><D4><D3><D2><D1><D0>| + + - Option 3: 8-bit mode and D/CX as a separate interface line + | Command or data | + |<D7><D6><D5><D4><D3><D2><D1><D0>| + + The panel resolution is specified using the panel-timing node properties + hactive (width) and vactive (height). The other mandatory panel-timing + properties should be set to zero except clock-frequency which can be + optionally set to inform about the actual pixel clock frequency. + + If the panel is wired to the controller at an offset specify this using + hback-porch (x-offset) and vback-porch (y-offset). + +allOf: + - $ref: panel-common.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + items: + - enum: + - saef,sftc154b + - sainsmart18 + - shineworld,lh133k + - const: panel-mipi-dbi-spi + + write-only: + type: boolean + description: + Controller is not readable (ie. Din (MISO on the SPI interface) is not + wired up). + + dc-gpios: + maxItems: 1 + description: | + Controller data/command selection (D/CX) in 4-line SPI mode. + If not set, the controller is in 3-line SPI mode. + + io-supply: + description: | + Logic level supply for interface signals (Vddi). + No need to set if this is the same as power-supply. + + spi-3wire: true + +required: + - compatible + - reg + - width-mm + - height-mm + - panel-timing + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + display@0{ + compatible = "sainsmart18", "panel-mipi-dbi-spi"; + reg = <0>; + spi-max-frequency = <40000000>; + + dc-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>; + write-only; + + backlight = <&backlight>; + + width-mm = <35>; + height-mm = <28>; + + panel-timing { + hactive = <160>; + vactive = <128>; + hback-porch = <0>; + vback-porch = <0>; + clock-frequency = <0>; + hfront-porch = <0>; + hsync-len = <0>; + vfront-porch = <0>; + vsync-len = <0>; + }; + }; + }; + +... diff --git a/dts/Bindings/display/panel/panel-simple-dsi.yaml b/dts/Bindings/display/panel/panel-simple-dsi.yaml index b2e8742fd6..f9160d7bac 100644 --- a/dts/Bindings/display/panel/panel-simple-dsi.yaml +++ b/dts/Bindings/display/panel/panel-simple-dsi.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/display/panel/panel-simple-dsi.yaml# @@ -19,9 +19,6 @@ description: | If the panel is more advanced a dedicated binding file is required. -allOf: - - $ref: panel-common.yaml# - properties: compatible: @@ -29,8 +26,36 @@ properties: # compatible must be listed in alphabetical order, ordered by compatible. # The description in the comment is mandatory for each compatible. + # AU Optronics Corporation 8.0" WUXGA TFT LCD panel + - auo,b080uan01 + # Boe Corporation 8.0" WUXGA TFT LCD panel + - boe,tv080wum-nl0 + # Innolux P079ZCA 7.85" 768x1024 TFT LCD panel + - innolux,p079zca + # JDI FHD_R63452 1080x1920 5.2" IPS LCD Panel + - jdi,fhd-r63452 + # Khadas TS050 5" 1080x1920 LCD panel + - khadas,ts050 + # Kingdisplay KD097D04 9.7" 1536x2048 TFT LCD panel + - kingdisplay,kd097d04 + # LG ACX467AKM-7 4.95" 1080×1920 LCD Panel + - lg,acx467akm-7 + # LG Corporation 7" WXGA TFT LCD panel + - lg,ld070wx3-sl01 + # LG Corporation 5" HD TFT LCD panel + - lg,lh500wx1-sd03 + # One Stop Displays OSD101T2587-53TS 10.1" 1920x1200 panel + - osddisplays,osd101t2587-53ts + # Panasonic 10" WUXGA TFT LCD panel + - panasonic,vvx10f004b00 # Panasonic 10" WUXGA TFT LCD panel - panasonic,vvx10f034n00 + # Samsung s6e3fc2x01 1080x2340 AMOLED panel + - samsung,s6e3fc2x01 + # Samsung sofef00 1080x2280 AMOLED panel + - samsung,sofef00 + # Shangai Top Display Optoelectronics 7" TL070WSH30 1024x600 TFT LCD panel + - tdo,tl070wsh30 reg: maxItems: 1 @@ -38,14 +63,34 @@ properties: backlight: true enable-gpios: true + reset-gpios: true port: true power-supply: true + vddio-supply: true + +allOf: + - $ref: panel-common.yaml# + - if: + properties: + compatible: + enum: + - samsung,s6e3fc2x01 + - samsung,sofef00 + then: + properties: + power-supply: false + required: + - vddio-supply + else: + properties: + vddio-supply: false + required: + - power-supply additionalProperties: false required: - compatible - - power-supply - reg examples: diff --git a/dts/Bindings/display/panel/panel-simple-lvds-dual-ports.yaml b/dts/Bindings/display/panel/panel-simple-lvds-dual-ports.yaml new file mode 100644 index 0000000000..716ece5f39 --- /dev/null +++ b/dts/Bindings/display/panel/panel-simple-lvds-dual-ports.yaml @@ -0,0 +1,120 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/panel-simple-lvds-dual-ports.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Simple LVDS panels with one power supply and dual LVDS ports + +maintainers: + - Liu Ying <victor.liu@nxp.com> + - Thierry Reding <thierry.reding@gmail.com> + - Sam Ravnborg <sam@ravnborg.org> + +description: | + This binding file is a collection of the LVDS panels that + has dual LVDS ports and requires only a single power-supply. + The first port receives odd pixels, and the second port receives even pixels. + There are optionally a backlight and an enable GPIO. + The panel may use an OF graph binding for the association to the display, + or it may be a direct child node of the display. + + If the panel is more advanced a dedicated binding file is required. + +allOf: + - $ref: panel-common.yaml# + +properties: + + compatible: + enum: + # compatible must be listed in alphabetical order, ordered by compatible. + # The description in the comment is mandatory for each compatible. + + # AU Optronics Corporation 13.3" FHD (1920x1080) TFT LCD panel + - auo,g133han01 + # AU Optronics Corporation 15.6" FHD (1920x1080) TFT LCD panel + - auo,g156han04 + # AU Optronics Corporation 18.5" FHD (1920x1080) TFT LCD panel + - auo,g185han01 + # AU Optronics Corporation 19.0" (1280x1024) TFT LCD panel + - auo,g190ean01 + # Kaohsiung Opto-Electronics Inc. 10.1" WUXGA (1920 x 1200) LVDS TFT LCD panel + - koe,tx26d202vm0bwa + # NLT Technologies, Ltd. 15.6" FHD (1920x1080) LVDS TFT LCD panel + - nlt,nl192108ac18-02d + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: The first sink port. + + properties: + dual-lvds-odd-pixels: + type: boolean + description: The first sink port for odd pixels. + + required: + - dual-lvds-odd-pixels + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: The second sink port. + + properties: + dual-lvds-even-pixels: + type: boolean + description: The second sink port for even pixels. + + required: + - dual-lvds-even-pixels + + required: + - port@0 + - port@1 + + backlight: true + enable-gpios: true + power-supply: true + +additionalProperties: false + +required: + - compatible + - ports + - power-supply + +examples: + - | + panel: panel-lvds { + compatible = "koe,tx26d202vm0bwa"; + power-supply = <&vdd_lcd_reg>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + dual-lvds-odd-pixels; + reg = <0>; + + panel_lvds0_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + + port@1 { + dual-lvds-even-pixels; + reg = <1>; + + panel_lvds1_in: endpoint { + remote-endpoint = <&lvds1_out>; + }; + }; + }; + }; diff --git a/dts/Bindings/display/panel/panel-simple.yaml b/dts/Bindings/display/panel/panel-simple.yaml index 393ffc6acb..634a10c6f2 100644 --- a/dts/Bindings/display/panel/panel-simple.yaml +++ b/dts/Bindings/display/panel/panel-simple.yaml @@ -21,20 +21,24 @@ description: | allOf: - $ref: panel-common.yaml# + - $ref: ../lvds-data-mapping.yaml# properties: - compatible: enum: # compatible must be listed in alphabetical order, ordered by compatible. # The description in the comment is mandatory for each compatible. + # Ampire AM-1280800N3TZQW-T00H 10.1" WQVGA TFT LCD panel + - ampire,am-1280800n3tzqw-t00h # Ampire AM-480272H3TMQW-T01H 4.3" WQVGA TFT LCD panel - ampire,am-480272h3tmqw-t01h + # Ampire AM-800480L1TMQW-T00H 5" WVGA TFT LCD panel + - ampire,am-800480l1tmqw-t00h # Ampire AM-800480R3TMQW-A1H 7.0" WVGA TFT LCD panel - ampire,am800480r3tmqwa1h - # AU Optronics Corporation 8.0" WUXGA TFT LCD panel - - auo,b080uan01 + # Ampire AM-800600P5TMQW-TB8H 8.0" SVGA TFT LCD panel + - ampire,am800600p5tmqw-tb8h # AU Optronics Corporation 10.1" WSVGA TFT LCD panel - auo,b101aw03 # AU Optronics Corporation 10.1" WSVGA TFT LCD panel @@ -46,69 +50,104 @@ properties: # AU Optronics Corporation 11.6" HD (1366x768) color TFT-LCD panel - auo,b116xw03 # AU Optronics Corporation 13.3" FHD (1920x1080) color TFT-LCD panel + - auo,b133han05 + # AU Optronics Corporation 13.3" FHD (1920x1080) color TFT-LCD panel - auo,b133htn01 # AU Optronics Corporation 13.3" WXGA (1366x768) TFT LCD panel - auo,b133xtn01 + # AU Optronics Corporation 14.0" FHD (1920x1080) color TFT-LCD panel + - auo,b140han06 # AU Optronics Corporation 7.0" FHD (800 x 480) TFT LCD panel - auo,g070vvn01 # AU Optronics Corporation 10.1" (1280x800) color TFT LCD panel - auo,g101evn010 # AU Optronics Corporation 10.4" (800x600) color TFT LCD panel - auo,g104sn02 - # AU Optronics Corporation 13.3" FHD (1920x1080) TFT LCD panel - - auo,g133han01 - # AU Optronics Corporation 18.5" FHD (1920x1080) TFT LCD panel - - auo,g185han01 + # AU Optronics Corporation 12.1" (1280x800) TFT LCD panel + - auo,g121ean01 + # AU Optronics Corporation 15.6" (1366x768) TFT LCD panel + - auo,g156xtn01 # AU Optronics Corporation 31.5" FHD (1920x1080) TFT LCD panel - auo,p320hvn03 # AU Optronics Corporation 21.5" FHD (1920x1080) color TFT LCD panel - auo,t215hvn01 # Shanghai AVIC Optoelectronics 7" 1024x600 color TFT-LCD panel - avic,tm070ddh03 + # BOE BP101WX1-100 10.1" WXGA (1280x800) LVDS panel + - boe,bp101wx1-100 + # BOE EV121WXM-N10-1850 12.1" WXGA (1280x800) TFT LCD panel + - boe,ev121wxm-n10-1850 # BOE HV070WSA-100 7.01" WSVGA TFT LCD panel - boe,hv070wsa-100 # BOE OPTOELECTRONICS TECHNOLOGY 10.1" WXGA TFT LCD panel - boe,nv101wxmn51 + # BOE NV133FHM-N61 13.3" FHD (1920x1080) TFT LCD Panel + - boe,nv110wtm-n61 + # BOE NV110WTM-N61 11.0" 2160x1440 TFT LCD Panel + - boe,nv133fhm-n61 + # BOE NV133FHM-N62 13.3" FHD (1920x1080) TFT LCD Panel + - boe,nv133fhm-n62 # BOE NV140FHM-N49 14.0" FHD a-Si FT panel - boe,nv140fhmn49 - # Boe Corporation 8.0" WUXGA TFT LCD panel - - boe,tv080wum-nl0 # CDTech(H.K.) Electronics Limited 4.3" 480x272 color TFT-LCD panel - cdtech,s043wq26h-ct7 + # CDTech(H.K.) Electronics Limited 7" WSVGA (1024x600) TFT LCD Panel + - cdtech,s070pws19hp-fc21 + # CDTech(H.K.) Electronics Limited 7" WVGA (800x480) TFT LCD Panel + - cdtech,s070swv29hg-dc44 # CDTech(H.K.) Electronics Limited 7" 800x480 color TFT-LCD panel - cdtech,s070wv95-ct16 - # Chunghwa Picture Tubes Ltd. 7" WXGA TFT LCD panel - - chunghwa,claa070wp03xg + # Chefree CH101OLHLWH-002 10.1" (1280x800) color TFT LCD panel + - chefree,ch101olhlwh-002 # Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel - chunghwa,claa101wa01a # Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel + - chunghwa,claa101wb01 + # Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel - chunghwa,claa101wb03 + # DataImage, Inc. 4.3" WQVGA (480x272) TFT LCD panel with 24-bit parallel interface. + - dataimage,fg040346dsswbg04 + # DataImage, Inc. 10.1" WXGA (1280×800) TFT LCD panel + - dataimage,fg1001l0dsswmg01 # DataImage, Inc. 7" WVGA (800x480) TFT LCD panel with 24-bit parallel interface. - dataimage,scf0700c48ggu18 # DLC Display Co. DLC1010GIG 10.1" WXGA TFT LCD Panel - dlc,dlc1010gig # Emerging Display Technology Corp. 3.5" QVGA TFT LCD panel - edt,et035012dm6 + # Emerging Display Technology Corp. 5.7" VGA TFT LCD panel + - edt,et057090dhu + - edt,et070080dh6 + # Emerging Display Technology Corp. 3.5" WVGA TFT LCD panel with + # capacitive multitouch + - edt,etm0350g0dh6 # Emerging Display Technology Corp. 480x272 TFT Display with capacitive touch - edt,etm043080dh6gp # Emerging Display Technology Corp. 480x272 TFT Display - edt,etm0430g0dh6 - # Emerging Display Technology Corp. 5.7" VGA TFT LCD panel - - edt,et057090dhu - # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch - - edt,etm070080dh6 - # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch - - edt,etm0700g0dh6 # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch # Same as ETM0700G0DH6 but with inverted pixel clock. - edt,etm070080bdh6 # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch + # Same timings as the ETM0700G0DH6, but with resistive touch. + - edt,etm070080dh6 + # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch # Same display as the ETM0700G0BDH6, but with changed hardware for the # backlight and the touch interface. - edt,etm070080edh6 + - edt,etm0700g0bdh6 # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch - # Same timings as the ETM0700G0DH6, but with resistive touch. - - edt,etm070080dh6 + - edt,etm0700g0dh6 + - edt,etm0700g0edh6 + # Emerging Display Technology Corp. LVDS WSVGA TFT Display with capacitive touch + - edt,etml0700y5dha + # Emerging Display Technology Corp. 5.7" VGA TFT LCD panel with + # capacitive touch + - edt,etmv570g2dhu + # E Ink VB3300-KCA + - eink,vb3300-kca + # Evervision Electronics Co. Ltd. VGG644804 5.7" VGA TFT LCD Panel + - evervision,vgg644804 # Evervision Electronics Co. Ltd. VGG804821 5.0" WVGA TFT LCD Panel - evervision,vgg804821 # Foxlink Group 5" WVGA TFT LCD panel @@ -127,12 +166,18 @@ properties: - hannstar,hsd100pxn1 # Hitachi Ltd. Corporation 9" WVGA (800x480) TFT LCD panel - hit,tx23d38vm0caa + # InfoVision Optoelectronics M133NWF4 R0 13.3" FHD (1920x1080) TFT LCD panel + - ivo,m133nwf4-r0 # Innolux AT043TN24 4.3" WQVGA TFT LCD panel - innolux,at043tn24 # Innolux AT070TN92 7.0" WQVGA TFT LCD panel - innolux,at070tn92 + # Innolux G070ACE-L01 7" WVGA (800x480) TFT LCD panel + - innolux,g070ace-l01 # Innolux G070Y2-L01 7" WVGA (800x480) TFT LCD panel - innolux,g070y2-l01 + # Innolux G070Y2-T02 7" WVGA (800x480) TFT LCD TTL panel + - innolux,g070y2-t02 # Innolux Corporation 10.1" G101ICE-L01 WXGA (1280x800) LVDS panel - innolux,g101ice-l01 # Innolux Corporation 12.1" WXGA (1280x800) TFT LCD panel @@ -140,15 +185,27 @@ properties: # Innolux Corporation 12.1" G121X1-L03 XGA (1024x768) TFT LCD panel - innolux,g121x1-l03 # Innolux Corporation 11.6" WXGA (1366x768) TFT LCD panel + - innolux,n116bca-ea1 + # Innolux Corporation 11.6" WXGA (1366x768) TFT LCD panel - innolux,n116bge + # InnoLux 13.3" FHD (1920x1080) eDP TFT LCD panel + - innolux,n125hce-gn1 + # InnoLux 15.6" FHD (1920x1080) TFT LCD panel + - innolux,g156hce-l01 # InnoLux 15.6" WXGA TFT LCD panel - innolux,n156bge-l21 + # Innolux P120ZDG-BF1 12.02 inch eDP 2K display panel + - innolux,p120zdg-bf1 # Innolux Corporation 7.0" WSVGA (1024x600) TFT LCD panel - innolux,zj070na-01p + # King & Display KD116N21-30NV-A010 eDP TFT LCD panel + - kingdisplay,kd116n21-30nv-a010 # Kaohsiung Opto-Electronics Inc. 5.7" QVGA (320 x 240) TFT LCD panel - koe,tx14d24vm1bpa # Kaohsiung Opto-Electronics. TX31D200VM0BAA 12.3" HSXGA LVDS panel - koe,tx31d200vm0baa + # Kyocera Corporation 7" WVGA (800x480) transmissive color TFT + - kyo,tcg070wvlq # Kyocera Corporation 12.1" XGA (1024x768) TFT LCD panel - kyo,tcg121xglp # LeMaker BL035-RGB-002 3.5" QVGA TFT LCD panel @@ -169,8 +226,20 @@ properties: - logictechno,lt161010-2nhr # Logic Technologies LT170410-2WHC 10.1" 1280x800 IPS TFT Cap Touch Mod. - logictechno,lt170410-2whc + # Logic Technologies LTTD800x480 L2RT 7" 800x480 TFT Resistive Touch Module + - logictechno,lttd800480070-l2rt + # Logic Technologies LTTD800480070-L6WH-RT 7” 800x480 TFT Resistive Touch Module + - logictechno,lttd800480070-l6wh-rt # Mitsubishi "AA070MC01 7.0" WVGA TFT LCD panel - mitsubishi,aa070mc01-ca1 + # Mitsubishi AA084XE01 8.4" XGA TFT LCD panel + - mitsubishi,aa084xe01 + # Multi-Inno Technology Co.,Ltd MI0700S4T-6 7" 800x480 TFT Resistive Touch Module + - multi-inno,mi0700s4t-6 + # Multi-Inno Technology Co.,Ltd MI0800FT-9 8" 800x600 TFT Resistive Touch Module + - multi-inno,mi0800ft-9 + # Multi-Inno Technology Co.,Ltd MI1010AIT-1CP 10.1" 1280x800 LVDS IPS Cap Touch Mod. + - multi-inno,mi1010ait-1cp # NEC LCD Technologies, Ltd. 12.1" WXGA (1280x800) LVDS TFT LCD panel - nec,nl12880bc20-05 # NEC LCD Technologies,Ltd. WQVGA TFT LCD panel @@ -181,8 +250,6 @@ properties: - neweast,wjfh116008a # Newhaven Display International 480 x 272 TFT LCD panel - newhaven,nhd-4.3-480272ef-atxl - # NLT Technologies, Ltd. 15.6" FHD (1920x1080) LVDS TFT LCD panel - - nlt,nl192108ac18-02d # New Vision Display 7.0" 800 RGB x 480 TFT LCD panel - nvd,9128 # OKAYA Electric America, Inc. RS800480T-7X0GP 7" WVGA LCD panel @@ -201,14 +268,24 @@ properties: - osddisplays,osd070t1718-19ts # One Stop Displays OSD101T2045-53TS 10.1" 1920x1200 panel - osddisplays,osd101t2045-53ts + # POWERTIP PH800480T013-IDF2 7.0" WVGA TFT LCD panel + - powertip,ph800480t013-idf02 # QiaoDian XianShi Corporation 4"3 TFT LCD panel - qiaodian,qd43003c0-40 + # Shenzhen QiShenglong Industrialist Co., Ltd. Gopher 2b 4.3" 480(RGB)x272 TFT LCD panel + - qishenglong,gopher2b-lcd # Rocktech Displays Ltd. RK101II01D-CT 10.1" TFT 1280x800 - rocktech,rk101ii01d-ct # Rocktech Display Ltd. RK070ER9427 800(RGB)x480 TFT LCD panel - rocktech,rk070er9427 + # Rocktech Display Ltd. RK043FN48H 4.3" 480x272 LCD-TFT panel + - rocktech,rk043fn48h + # Samsung 13.3" FHD (1920x1080 pixels) eDP AMOLED panel + - samsung,atna33xc20 # Samsung 12.2" (2560x1600 pixels) TFT LCD panel - samsung,lsn122dl01-c01 + # Samsung Electronics 10.1" WXGA (1280x800) TFT LCD panel + - samsung,ltl101al01 # Samsung Electronics 10.1" WSVGA TFT LCD panel - samsung,ltn101nt05 # Samsung Electronics 14" WXGA (1366x768) TFT LCD panel @@ -223,14 +300,24 @@ properties: - sharp,lq101k1ly04 # Sharp 12.3" (2400x1600 pixels) TFT LCD panel - sharp,lq123p1jx31 + # Sharp 14" (1920x1080 pixels) TFT LCD panel + - sharp,lq140m1jw46 # Sharp LS020B1DD01D 2.0" HQVGA TFT LCD panel - sharp,ls020b1dd01d # Shelly SCA07010-BFN-LNN 7.0" WVGA TFT LCD panel - shelly,sca07010-bfn-lnn + # Starry KR070PE2T 7" WVGA TFT LCD panel + - starry,kr070pe2t # Starry 12.2" (1920x1200 pixels) TFT LCD panel - starry,kr122ea0sra + # Startek KD070WVFPA043-C069A 7" TFT LCD panel + - startek,kd070wvfpa + # Team Source Display Technology TST043015CMHX 4.3" WQVGA TFT LCD panel + - team-source-display,tst043015cmhx # Tianma Micro-electronics TM070JDHG30 7.0" WXGA TFT LCD panel - tianma,tm070jdhg30 + # Tianma Micro-electronics TM070JVHG33 7.0" WXGA TFT LCD panel + - tianma,tm070jvhg33 # Tianma Micro-electronics TM070RVHG71 7.0" WXGA TFT LCD panel - tianma,tm070rvhg71 # Toshiba 8.9" WXGA (1280x768) TFT LCD panel @@ -248,15 +335,33 @@ properties: - urt,umsh-8596md-11t - urt,umsh-8596md-19t - urt,umsh-8596md-20t + # Vivax TPC-9150 tablet 9.0" WSVGA TFT LCD panel + - vivax,tpc9150-panel # VXT 800x480 color TFT LCD panel - vxt,vl050-8048nt-c01 # Winstar Display Corporation 3.5" QVGA (320x240) TFT LCD panel - winstar,wf35ltiacd + # Yes Optoelectronics YTC700TLAG-05-201C 7" TFT LCD panel + - yes-optoelectronics,ytc700tlag-05-201c backlight: true + ddc-i2c-bus: true enable-gpios: true port: true power-supply: true + no-hpd: true + hpd-gpios: true + data-mapping: true + +if: + not: + properties: + compatible: + contains: + const: innolux,g101ice-l01 +then: + properties: + data-mapping: false additionalProperties: false @@ -276,3 +381,16 @@ examples: }; }; }; + - | + panel_lvds: panel-lvds { + compatible = "innolux,g101ice-l01"; + power-supply = <&vcc_lcd_reg>; + + data-mapping = "jeida-24"; + + port { + panel_in_lvds: endpoint { + remote-endpoint = <<dc_out_lvds>; + }; + }; + }; diff --git a/dts/Bindings/display/panel/panel-timing.yaml b/dts/Bindings/display/panel/panel-timing.yaml index bd558ad789..aea69b84ca 100644 --- a/dts/Bindings/display/panel/panel-timing.yaml +++ b/dts/Bindings/display/panel/panel-timing.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/display/panel/panel-timing.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: panel timing bindings +title: panel timing maintainers: - Thierry Reding <thierry.reding@gmail.com> @@ -17,29 +17,29 @@ description: | The parameters are defined as seen in the following illustration. - +----------+-------------------------------------+----------+-------+ - | | ^ | | | - | | |vback_porch | | | - | | v | | | - +----------#######################################----------+-------+ - | # ^ # | | - | # | # | | - | hback # | # hfront | hsync | - | porch # | hactive # porch | len | - |<-------->#<-------+--------------------------->#<-------->|<----->| - | # | # | | - | # |vactive # | | - | # | # | | - | # v # | | - +----------#######################################----------+-------+ - | | ^ | | | - | | |vfront_porch | | | - | | v | | | - +----------+-------------------------------------+----------+-------+ - | | ^ | | | - | | |vsync_len | | | - | | v | | | - +----------+-------------------------------------+----------+-------+ + +-------+----------+-------------------------------------+----------+ + | | | ^ | | + | | | |vsync_len | | + | | | v | | + +-------+----------+-------------------------------------+----------+ + | | | ^ | | + | | | |vback_porch | | + | | | v | | + +-------+----------#######################################----------+ + | | # ^ # | + | | # | # | + | hsync | hback # | # hfront | + | len | porch # | hactive # porch | + |<----->|<-------->#<-------+--------------------------->#<-------->| + | | # | # | + | | # |vactive # | + | | # | # | + | | # v # | + +-------+----------#######################################----------+ + | | | ^ | | + | | | |vfront_porch | | + | | | v | | + +-------+----------+-------------------------------------+----------+ The following is the panel timings shown with time on the x-axis. @@ -59,7 +59,7 @@ description: | properties: clock-frequency: - description: Panel clock in Hz + description: Panel clock in Hz hactive: $ref: /schemas/types.yaml#/definitions/uint32 @@ -71,99 +71,82 @@ properties: hfront-porch: description: Horizontal front porch panel timing + $ref: /schemas/types.yaml#/definitions/uint32-array oneOf: - - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - maxItems: 1 - items: - description: typical number of pixels - - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 3 - maxItems: 3 - items: - description: min, typ, max number of pixels + - maxItems: 1 + items: + description: typical number of pixels + - minItems: 3 + maxItems: 3 + items: + description: min, typ, max number of pixels hback-porch: description: Horizontal back porch timing + $ref: /schemas/types.yaml#/definitions/uint32-array oneOf: - - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - maxItems: 1 - items: - description: typical number of pixels - - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 3 - maxItems: 3 - items: - description: min, typ, max number of pixels + - maxItems: 1 + items: + description: typical number of pixels + - minItems: 3 + maxItems: 3 + items: + description: min, typ, max number of pixels hsync-len: description: Horizontal sync length panel timing + $ref: /schemas/types.yaml#/definitions/uint32-array oneOf: - - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - maxItems: 1 - items: - description: typical number of pixels - - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 3 - maxItems: 3 - items: - description: min, typ, max number of pixels + - maxItems: 1 + items: + description: typical number of pixels + - minItems: 3 + maxItems: 3 + items: + description: min, typ, max number of pixels vfront-porch: description: Vertical front porch panel timing + $ref: /schemas/types.yaml#/definitions/uint32-array oneOf: - - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - maxItems: 1 - items: - description: typical number of lines - - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 3 - maxItems: 3 - items: - description: min, typ, max number of lines + - maxItems: 1 + items: + description: typical number of lines + - minItems: 3 + maxItems: 3 + items: + description: min, typ, max number of lines vback-porch: description: Vertical back porch panel timing + $ref: /schemas/types.yaml#/definitions/uint32-array oneOf: - - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - maxItems: 1 - items: - description: typical number of lines - - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 3 - maxItems: 3 - items: - description: min, typ, max number of lines + - maxItems: 1 + items: + description: typical number of lines + - minItems: 3 + maxItems: 3 + items: + description: min, typ, max number of lines vsync-len: description: Vertical sync length panel timing + $ref: /schemas/types.yaml#/definitions/uint32-array oneOf: - - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - maxItems: 1 - items: - description: typical number of lines - - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 3 - maxItems: 3 - items: - description: min, typ, max number of lines + - maxItems: 1 + items: + description: typical number of lines + - minItems: 3 + maxItems: 3 + items: + description: min, typ, max number of lines hsync-active: description: | Horizontal sync pulse. 0 selects active low, 1 selects active high. If omitted then it is not used by the hardware + $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1] vsync-active: @@ -171,6 +154,7 @@ properties: Vertical sync pulse. 0 selects active low, 1 selects active high. If omitted then it is not used by the hardware + $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1] de-active: @@ -178,6 +162,7 @@ properties: Data enable. 0 selects active low, 1 selects active high. If omitted then it is not used by the hardware + $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1] pixelclk-active: @@ -187,6 +172,7 @@ properties: sample data on rising edge. Use 1 to drive pixel data on rising edge and sample data on falling edge + $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1] syncclk-active: @@ -197,6 +183,7 @@ properties: sample sync on rising edge of pixel clock. Use 1 to drive sync on rising edge and sample sync on falling edge of pixel clock + $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1] interlaced: @@ -212,15 +199,15 @@ properties: description: Enable double clock mode required: - - clock-frequency - - hactive - - vactive - - hfront-porch - - hback-porch - - hsync-len - - vfront-porch - - vback-porch - - vsync-len + - clock-frequency + - hactive + - vactive + - hfront-porch + - hback-porch + - hsync-len + - vfront-porch + - vback-porch + - vsync-len additionalProperties: false diff --git a/dts/Bindings/display/panel/raydium,rm67191.txt b/dts/Bindings/display/panel/raydium,rm67191.txt deleted file mode 100644 index 10424695aa..0000000000 --- a/dts/Bindings/display/panel/raydium,rm67191.txt +++ /dev/null @@ -1,41 +0,0 @@ -Raydium RM67171 OLED LCD panel with MIPI-DSI protocol - -Required properties: -- compatible: "raydium,rm67191" -- reg: virtual channel for MIPI-DSI protocol - must be <0> -- dsi-lanes: number of DSI lanes to be used - must be <3> or <4> -- port: input port node with endpoint definition as - defined in Documentation/devicetree/bindings/graph.txt; - the input port should be connected to a MIPI-DSI device - driver - -Optional properties: -- reset-gpios: a GPIO spec for the RST_B GPIO pin -- v3p3-supply: phandle to 3.3V regulator that powers the VDD_3V3 pin -- v1p8-supply: phandle to 1.8V regulator that powers the VDD_1V8 pin -- width-mm: see panel-common.txt -- height-mm: see panel-common.txt -- video-mode: 0 - burst-mode - 1 - non-burst with sync event - 2 - non-burst with sync pulse - -Example: - - panel@0 { - compatible = "raydium,rm67191"; - reg = <0>; - pinctrl-0 = <&pinctrl_mipi_dsi_0_1_en>; - pinctrl-names = "default"; - reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; - dsi-lanes = <4>; - width-mm = <68>; - height-mm = <121>; - - port { - panel_in: endpoint { - remote-endpoint = <&mipi_out>; - }; - }; - }; diff --git a/dts/Bindings/display/panel/raydium,rm67191.yaml b/dts/Bindings/display/panel/raydium,rm67191.yaml new file mode 100644 index 0000000000..d62fd692bf --- /dev/null +++ b/dts/Bindings/display/panel/raydium,rm67191.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/raydium,rm67191.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Raydium RM67171 OLED LCD panel with MIPI-DSI protocol + +maintainers: + - Robert Chiras <robert.chiras@nxp.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: raydium,rm67191 + + reg: true + port: true + reset-gpios: true + width-mm: true + height-mm: true + + dsi-lanes: + description: Number of DSI lanes to be used must be <3> or <4> + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [3, 4] + + v3p3-supply: + description: phandle to 3.3V regulator that powers the VDD_3V3 pin + + v1p8-supply: + description: phandle to 1.8V regulator that powers the VDD_1V8 pin + + video-mode: + description: | + 0 - burst-mode + 1 - non-burst with sync event + 2 - non-burst with sync pulse + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + +required: + - compatible + - reg + - dsi-lanes + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "raydium,rm67191"; + reg = <0>; + reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; + dsi-lanes = <4>; + width-mm = <68>; + height-mm = <121>; + video-mode = <1>; + + port { + panel_in: endpoint { + remote-endpoint = <&mipi_out>; + }; + }; + }; + }; + +... diff --git a/dts/Bindings/display/panel/raydium,rm68200.yaml b/dts/Bindings/display/panel/raydium,rm68200.yaml index a35ba16fc0..46fe1014eb 100644 --- a/dts/Bindings/display/panel/raydium,rm68200.yaml +++ b/dts/Bindings/display/panel/raydium,rm68200.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/display/panel/raydium,rm68200.yaml# @@ -7,11 +7,11 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Raydium Semiconductor Corporation RM68200 5.5" 720p MIPI-DSI TFT LCD panel maintainers: - - Philippe CORNU <philippe.cornu@st.com> + - Philippe CORNU <philippe.cornu@foss.st.com> description: | - The Raydium Semiconductor Corporation RM68200 is a 5.5" 720x1280 TFT LCD - panel connected using a MIPI-DSI video interface. + The Raydium Semiconductor Corporation RM68200 is a 5.5" 720x1280 TFT LCD + panel connected using a MIPI-DSI video interface. allOf: - $ref: panel-common.yaml# diff --git a/dts/Bindings/display/panel/raydium,rm692e5.yaml b/dts/Bindings/display/panel/raydium,rm692e5.yaml new file mode 100644 index 0000000000..f436ba6738 --- /dev/null +++ b/dts/Bindings/display/panel/raydium,rm692e5.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/raydium,rm692e5.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Raydium RM692E5 based DSI display panels + +maintainers: + - Konrad Dybcio <konradybcio@kernel.org> + +description: + The Raydium RM692E5 is a generic DSI Panel IC used to control + AMOLED panels. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - const: fairphone,fp5-rm692e5-boe + - const: raydium,rm692e5 + + dvdd-supply: + description: Digital voltage rail + + vci-supply: + description: Analog voltage rail + + vddio-supply: + description: I/O voltage rail + + reg: true + port: true + +required: + - compatible + - reg + - reset-gpios + - dvdd-supply + - vci-supply + - vddio-supply + - port + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "fairphone,fp5-rm692e5-boe", "raydium,rm692e5"; + reg = <0>; + + reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>; + dvdd-supply = <&vreg_oled_vci>; + vci-supply = <&vreg_l12c>; + vddio-supply = <&vreg_oled_dvdd>; + + port { + panel_in_0: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; + +... diff --git a/dts/Bindings/display/panel/rocktech,jh057n00900.txt b/dts/Bindings/display/panel/rocktech,jh057n00900.txt deleted file mode 100644 index a372c5d846..0000000000 --- a/dts/Bindings/display/panel/rocktech,jh057n00900.txt +++ /dev/null @@ -1,23 +0,0 @@ -Rocktech jh057n00900 5.5" 720x1440 TFT LCD panel - -Required properties: -- compatible: should be "rocktech,jh057n00900" -- reg: DSI virtual channel of the peripheral -- reset-gpios: panel reset gpio -- backlight: phandle of the backlight device attached to the panel -- vcc-supply: phandle of the regulator that provides the vcc supply voltage. -- iovcc-supply: phandle of the regulator that provides the iovcc supply - voltage. - -Example: - - &mipi_dsi { - panel@0 { - compatible = "rocktech,jh057n00900"; - reg = <0>; - backlight = <&backlight>; - reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>; - vcc-supply = <®_2v8_p>; - iovcc-supply = <®_1v8_p>; - }; - }; diff --git a/dts/Bindings/display/panel/rocktech,jh057n00900.yaml b/dts/Bindings/display/panel/rocktech,jh057n00900.yaml new file mode 100644 index 0000000000..97cccd8a84 --- /dev/null +++ b/dts/Bindings/display/panel/rocktech,jh057n00900.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/rocktech,jh057n00900.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rocktech JH057N00900 5.5" 720x1440 TFT LCD panel + +maintainers: + - Ondrej Jirman <megi@xff.cz> + - Guido Gŭnther <agx@sigxcpu.org> + +description: + Rocktech JH057N00900 is a 720x1440 TFT LCD panel + connected using a MIPI-DSI video interface. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + enum: + # Anberic RG353V-V2 5.0" 640x480 TFT LCD panel + - anbernic,rg353v-panel-v2 + # Powkiddy RGB30 3.0" 720x720 TFT LCD panel + - powkiddy,rgb30-panel + # Rocktech JH057N00900 5.5" 720x1440 TFT LCD panel + - rocktech,jh057n00900 + # Xingbangda XBD599 5.99" 720x1440 TFT LCD panel + - xingbangda,xbd599 + + port: true + reg: + maxItems: 1 + description: DSI virtual channel + + vcc-supply: + description: Panel power supply + + iovcc-supply: + description: I/O voltage supply + + reset-gpios: true + + backlight: true + +required: + - compatible + - reg + - vcc-supply + - iovcc-supply + - reset-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "rocktech,jh057n00900"; + reg = <0>; + vcc-supply = <®_2v8_p>; + iovcc-supply = <®_1v8_p>; + reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>; + backlight = <&backlight>; + }; + }; + +... diff --git a/dts/Bindings/display/panel/ronbo,rb070d30.yaml b/dts/Bindings/display/panel/ronbo,rb070d30.yaml index d67617f6f7..95ce22c678 100644 --- a/dts/Bindings/display/panel/ronbo,rb070d30.yaml +++ b/dts/Bindings/display/panel/ronbo,rb070d30.yaml @@ -37,7 +37,7 @@ properties: backlight: description: Backlight used by the panel - $ref: "/schemas/types.yaml#/definitions/phandle" + $ref: /schemas/types.yaml#/definitions/phandle required: - compatible diff --git a/dts/Bindings/display/panel/samsung,amoled-mipi-dsi.yaml b/dts/Bindings/display/panel/samsung,amoled-mipi-dsi.yaml new file mode 100644 index 0000000000..ccc482570d --- /dev/null +++ b/dts/Bindings/display/panel/samsung,amoled-mipi-dsi.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/samsung,amoled-mipi-dsi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung AMOLED MIPI-DSI panels + +maintainers: + - Hoegeun Kwon <hoegeun.kwon@samsung.com> + +allOf: + - $ref: panel-common.yaml# + + - if: + properties: + compatible: + contains: + enum: + - samsung,s6e3ha2 + - samsung,s6e3hf2 + then: + required: + - enable-gpios + +properties: + compatible: + enum: + # Samsung S6E63J0X03 1.63" 320x320 AMOLED panel + - samsung,s6e63j0x03 + # Samsung S6E3HA2 5.7" 1440x2560 AMOLED panel + - samsung,s6e3ha2 + # Samsung S6E3HF2 5.65" 1600x2560 AMOLED panel + - samsung,s6e3hf2 + + reg: true + reset-gpios: true + enable-gpios: true + te-gpios: true + + vdd3-supply: + description: I/O voltage supply + + vci-supply: + description: voltage supply for analog circuits + +required: + - compatible + - reg + - vdd3-supply + - vci-supply + - reset-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "samsung,s6e3ha2"; + reg = <0>; + vdd3-supply = <&ldo27_reg>; + vci-supply = <&ldo28_reg>; + reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>; + enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>; + te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>; + }; + }; + +... diff --git a/dts/Bindings/display/panel/samsung,ams495qa01.yaml b/dts/Bindings/display/panel/samsung,ams495qa01.yaml new file mode 100644 index 0000000000..58fa073ce2 --- /dev/null +++ b/dts/Bindings/display/panel/samsung,ams495qa01.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/samsung,ams495qa01.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung AMS495QA01 panel with Magnachip D53E6EA8966 controller + +maintainers: + - Chris Morgan <macromorgan@hotmail.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: samsung,ams495qa01 + + reg: true + reset-gpios: + description: reset gpio, must be GPIO_ACTIVE_LOW + elvdd-supply: + description: regulator that supplies voltage to the panel display + enable-gpios: true + port: true + vdd-supply: + description: regulator that supplies voltage to panel logic + +required: + - compatible + - reg + - reset-gpios + - vdd-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "samsung,ams495qa01"; + reg = <0>; + reset-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>; + vdd-supply = <&vcc_3v3>; + + port { + mipi_in_panel: endpoint { + remote-endpoint = <&mipi_out_panel>; + }; + }; + }; + }; + +... diff --git a/dts/Bindings/display/panel/samsung,ld9040.txt b/dts/Bindings/display/panel/samsung,ld9040.txt deleted file mode 100644 index 354d4d1df4..0000000000 --- a/dts/Bindings/display/panel/samsung,ld9040.txt +++ /dev/null @@ -1,66 +0,0 @@ -Samsung LD9040 AMOLED LCD parallel RGB panel with SPI control bus - -Required properties: - - compatible: "samsung,ld9040" - - reg: address of the panel on SPI bus - - vdd3-supply: core voltage supply - - vci-supply: voltage supply for analog circuits - - reset-gpios: a GPIO spec for the reset pin - - display-timings: timings for the connected panel according to [1] - -The panel must obey rules for SPI slave device specified in document [2]. - -Optional properties: - - power-on-delay: delay after turning regulators on [ms] - - reset-delay: delay after reset sequence [ms] - - panel-width-mm: physical panel width [mm] - - panel-height-mm: physical panel height [mm] - -The device node can contain one 'port' child node with one child -'endpoint' node, according to the bindings defined in [3]. This -node should describe panel's video bus. - -[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt -[2]: Documentation/devicetree/bindings/spi/spi-bus.txt -[3]: Documentation/devicetree/bindings/media/video-interfaces.txt - -Example: - - lcd@0 { - compatible = "samsung,ld9040"; - reg = <0>; - vdd3-supply = <&ldo7_reg>; - vci-supply = <&ldo17_reg>; - reset-gpios = <&gpy4 5 0>; - spi-max-frequency = <1200000>; - spi-cpol; - spi-cpha; - power-on-delay = <10>; - reset-delay = <10>; - panel-width-mm = <90>; - panel-height-mm = <154>; - - display-timings { - timing { - clock-frequency = <23492370>; - hactive = <480>; - vactive = <800>; - hback-porch = <16>; - hfront-porch = <16>; - vback-porch = <2>; - vfront-porch = <28>; - hsync-len = <2>; - vsync-len = <1>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <0>; - pixelclk-active = <0>; - }; - }; - - port { - lcd_ep: endpoint { - remote-endpoint = <&fimd_dpi_ep>; - }; - }; - }; diff --git a/dts/Bindings/display/panel/samsung,ld9040.yaml b/dts/Bindings/display/panel/samsung,ld9040.yaml new file mode 100644 index 0000000000..c0fabeb386 --- /dev/null +++ b/dts/Bindings/display/panel/samsung,ld9040.yaml @@ -0,0 +1,105 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/samsung,ld9040.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung LD9040 AMOLED LCD parallel RGB panel with SPI control bus + +maintainers: + - Andrzej Hajda <a.hajda@samsung.com> + +allOf: + - $ref: panel-common.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + const: samsung,ld9040 + + display-timings: true + port: true + reg: true + reset-gpios: true + + vdd3-supply: + description: core voltage supply + + vci-supply: + description: voltage supply for analog circuits + + power-on-delay: + $ref: /schemas/types.yaml#/definitions/uint32 + description: delay after turning regulators on [ms] + + reset-delay: + $ref: /schemas/types.yaml#/definitions/uint32 + description: delay after reset sequence [ms] + + panel-width-mm: + description: physical panel width [mm] + + panel-height-mm: + description: physical panel height [mm] + + spi-cpha: true + spi-cpol: true + +required: + - compatible + - reg + - vdd3-supply + - vci-supply + - reset-gpios + - display-timings + +unevaluatedProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + lcd@0 { + compatible = "samsung,ld9040"; + + reg = <0>; + vdd3-supply = <&ldo7_reg>; + vci-supply = <&ldo17_reg>; + reset-gpios = <&gpy4 5 0>; + spi-max-frequency = <1200000>; + spi-cpol; + spi-cpha; + power-on-delay = <10>; + reset-delay = <10>; + panel-width-mm = <90>; + panel-height-mm = <154>; + + display-timings { + timing { + clock-frequency = <23492370>; + hactive = <480>; + vactive = <800>; + hback-porch = <16>; + hfront-porch = <16>; + vback-porch = <2>; + vfront-porch = <28>; + hsync-len = <2>; + vsync-len = <1>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <0>; + pixelclk-active = <0>; + }; + }; + + port { + lcd_ep: endpoint { + remote-endpoint = <&fimd_dpi_ep>; + }; + }; + }; + }; + +... diff --git a/dts/Bindings/display/panel/samsung,lms380kf01.yaml b/dts/Bindings/display/panel/samsung,lms380kf01.yaml new file mode 100644 index 0000000000..70ffc88d2a --- /dev/null +++ b/dts/Bindings/display/panel/samsung,lms380kf01.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/samsung,lms380kf01.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung LMS380KF01 display panel + +description: The LMS380KF01 is a 480x800 DPI display panel from Samsung Mobile + Displays (SMD) utilizing the WideChips WS2401 display controller. It can be + used with internal or external backlight control. + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +allOf: + - $ref: panel-common.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + const: samsung,lms380kf01 + + reg: true + + interrupts: + description: provides an optional ESD (electrostatic discharge) + interrupt that signals abnormalities in the display hardware. + This can also be raised for other reasons like erroneous + configuration. + maxItems: 1 + + reset-gpios: true + + vci-supply: + description: regulator that supplies the VCI analog voltage + usually around 3.0 V + + vccio-supply: + description: regulator that supplies the VCCIO voltage usually + around 1.8 V + + backlight: true + + spi-cpha: true + + spi-cpol: true + + spi-max-frequency: + maximum: 1200000 + + port: true + +required: + - compatible + - reg + - spi-cpha + - spi-cpol + - port + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + spi { + compatible = "spi-gpio"; + sck-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; + miso-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpio 2 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio 3 GPIO_ACTIVE_HIGH>; + num-chipselects = <1>; + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "samsung,lms380kf01"; + spi-max-frequency = <1200000>; + spi-cpha; + spi-cpol; + reg = <0>; + vci-supply = <&lcd_3v0_reg>; + vccio-supply = <&lcd_1v8_reg>; + reset-gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio>; + interrupts = <5 IRQ_TYPE_EDGE_RISING>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; + }; + +... diff --git a/dts/Bindings/display/panel/samsung,lms397kf04.yaml b/dts/Bindings/display/panel/samsung,lms397kf04.yaml new file mode 100644 index 0000000000..5e77cee93f --- /dev/null +++ b/dts/Bindings/display/panel/samsung,lms397kf04.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/samsung,lms397kf04.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung LMS397KF04 display panel + +description: The datasheet claims this is based around a display controller + named DB7430 with a separate backlight controller. + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +allOf: + - $ref: panel-common.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + const: samsung,lms397kf04 + + reg: true + + reset-gpios: true + + vci-supply: + description: regulator that supplies the VCI analog voltage + usually around 3.0 V + + vccio-supply: + description: regulator that supplies the VCCIO voltage usually + around 1.8 V + + backlight: true + + spi-cpha: true + + spi-cpol: true + + spi-max-frequency: + description: inherited as a SPI client node, the datasheet specifies + maximum 300 ns minimum cycle which gives around 3 MHz max frequency + maximum: 3000000 + + port: true + +required: + - compatible + - reg + - spi-cpha + - spi-cpol + - port + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + spi { + compatible = "spi-gpio"; + sck-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; + miso-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpio 2 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio 3 GPIO_ACTIVE_HIGH>; + num-chipselects = <1>; + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "samsung,lms397kf04"; + spi-max-frequency = <3000000>; + spi-cpha; + spi-cpol; + reg = <0>; + vci-supply = <&lcd_3v0_reg>; + vccio-supply = <&lcd_1v8_reg>; + reset-gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + backlight = <&ktd259>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; + }; + +... diff --git a/dts/Bindings/display/panel/samsung,s6d16d0.txt b/dts/Bindings/display/panel/samsung,s6d16d0.txt deleted file mode 100644 index b94e366f45..0000000000 --- a/dts/Bindings/display/panel/samsung,s6d16d0.txt +++ /dev/null @@ -1,30 +0,0 @@ -Samsung S6D16D0 4" 864x480 AMOLED panel - -Required properties: - - compatible: should be: - "samsung,s6d16d0", - - reg: the virtual channel number of a DSI peripheral - - vdd1-supply: I/O voltage supply - - reset-gpios: a GPIO spec for the reset pin (active low) - -The device node can contain one 'port' child node with one child -'endpoint' node, according to the bindings defined in -media/video-interfaces.txt. This node should describe panel's video bus. - -Example: -&dsi { - ... - - panel@0 { - compatible = "samsung,s6d16d0"; - reg = <0>; - vdd1-supply = <&foo>; - reset-gpios = <&foo_gpio 0 GPIO_ACTIVE_LOW>; - - port { - panel_in: endpoint { - remote-endpoint = <&dsi_out>; - }; - }; - }; -}; diff --git a/dts/Bindings/display/panel/samsung,s6d16d0.yaml b/dts/Bindings/display/panel/samsung,s6d16d0.yaml new file mode 100644 index 0000000000..66d147496b --- /dev/null +++ b/dts/Bindings/display/panel/samsung,s6d16d0.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/samsung,s6d16d0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S6D16D0 4" 864x480 AMOLED panel + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: samsung,s6d16d0 + + port: true + reg: true + reset-gpios: true + + vdd1-supply: + description: I/O voltage supply + +required: + - compatible + - reg + - vdd1-supply + - reset-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "samsung,s6d16d0"; + reg = <0>; + vdd1-supply = <&foo>; + reset-gpios = <&foo_gpio 0 GPIO_ACTIVE_LOW>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; + }; + +... diff --git a/dts/Bindings/display/panel/samsung,s6d27a1.yaml b/dts/Bindings/display/panel/samsung,s6d27a1.yaml new file mode 100644 index 0000000000..d273faf444 --- /dev/null +++ b/dts/Bindings/display/panel/samsung,s6d27a1.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/samsung,s6d27a1.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S6D27A1 display panel + +description: The S6D27A1 is a 480x800 DPI display panel from Samsung Mobile + Displays (SMD). + +maintainers: + - Markuss Broks <markuss.broks@gmail.com> + +allOf: + - $ref: panel-common.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + const: samsung,s6d27a1 + + reg: true + + interrupts: + description: provides an optional ESD (electrostatic discharge) + interrupt that signals abnormalities in the display hardware. + This can also be raised for other reasons like erroneous + configuration. + maxItems: 1 + + reset-gpios: true + + vci-supply: + description: regulator that supplies the VCI analog voltage + usually around 3.0 V + + vccio-supply: + description: regulator that supplies the VCCIO voltage usually + around 1.8 V + + backlight: true + + spi-cpha: true + + spi-cpol: true + + spi-max-frequency: + maximum: 1200000 + + port: true + +required: + - compatible + - reg + - vci-supply + - vccio-supply + - spi-cpha + - spi-cpol + - port + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + spi { + compatible = "spi-gpio"; + sck-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; + miso-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpio 2 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio 3 GPIO_ACTIVE_HIGH>; + num-chipselects = <1>; + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "samsung,s6d27a1"; + spi-max-frequency = <1200000>; + spi-cpha; + spi-cpol; + reg = <0>; + vci-supply = <&lcd_3v0_reg>; + vccio-supply = <&lcd_1v8_reg>; + reset-gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio>; + interrupts = <5 IRQ_TYPE_EDGE_RISING>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; + }; + +... diff --git a/dts/Bindings/display/panel/samsung,s6d7aa0.yaml b/dts/Bindings/display/panel/samsung,s6d7aa0.yaml new file mode 100644 index 0000000000..45a236d2cc --- /dev/null +++ b/dts/Bindings/display/panel/samsung,s6d7aa0.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/samsung,s6d7aa0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S6D7AA0 MIPI-DSI LCD panel controller + +maintainers: + - Artur Weber <aweber.kernel@gmail.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - enum: + # 1280x800 LSL080AL02 panel + - samsung,lsl080al02 + # 1024x768 LSL080AL03 panel + - samsung,lsl080al03 + # 1024x768 LTL101AT01 panel + - samsung,ltl101at01 + - const: samsung,s6d7aa0 + + reg: true + + backlight: + description: + Backlight to use for the panel. If this property is set on panels + that have DSI-based backlight control (LSL080AL03 and LTL101AT01), + it overrides the DSI-based backlight. + + reset-gpios: + description: Reset GPIO pin, usually GPIO_ACTIVE_LOW. + + power-supply: + description: + Main power supply for the panel; the exact voltage differs between + panels, and is usually somewhere around 3.3-5v. + + vmipi-supply: + description: VMIPI supply, usually 1.8v. + +required: + - compatible + - reg + - reset-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "samsung,lsl080al02", "samsung,s6d7aa0"; + reg = <0>; + power-supply = <&display_3v3_supply>; + reset-gpios = <&gpf0 4 GPIO_ACTIVE_LOW>; + backlight = <&backlight>; + }; + }; + +... diff --git a/dts/Bindings/display/panel/samsung,s6e3ha2.txt b/dts/Bindings/display/panel/samsung,s6e3ha2.txt deleted file mode 100644 index 4acea25c24..0000000000 --- a/dts/Bindings/display/panel/samsung,s6e3ha2.txt +++ /dev/null @@ -1,31 +0,0 @@ -Samsung S6E3HA2 5.7" 1440x2560 AMOLED panel -Samsung S6E3HF2 5.65" 1600x2560 AMOLED panel - -Required properties: - - compatible: should be one of: - "samsung,s6e3ha2", - "samsung,s6e3hf2". - - reg: the virtual channel number of a DSI peripheral - - vdd3-supply: I/O voltage supply - - vci-supply: voltage supply for analog circuits - - reset-gpios: a GPIO spec for the reset pin (active low) - - enable-gpios: a GPIO spec for the panel enable pin (active high) - -Optional properties: - - te-gpios: a GPIO spec for the tearing effect synchronization signal - gpio pin (active high) - -Example: -&dsi { - ... - - panel@0 { - compatible = "samsung,s6e3ha2"; - reg = <0>; - vdd3-supply = <&ldo27_reg>; - vci-supply = <&ldo28_reg>; - reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>; - enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>; - te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>; - }; -}; diff --git a/dts/Bindings/display/panel/samsung,s6e63j0x03.txt b/dts/Bindings/display/panel/samsung,s6e63j0x03.txt deleted file mode 100644 index 3f1a8392af..0000000000 --- a/dts/Bindings/display/panel/samsung,s6e63j0x03.txt +++ /dev/null @@ -1,24 +0,0 @@ -Samsung S6E63J0X03 1.63" 320x320 AMOLED panel (interface: MIPI-DSI command mode) - -Required properties: - - compatible: "samsung,s6e63j0x03" - - reg: the virtual channel number of a DSI peripheral - - vdd3-supply: I/O voltage supply - - vci-supply: voltage supply for analog circuits - - reset-gpios: a GPIO spec for the reset pin (active low) - - te-gpios: a GPIO spec for the tearing effect synchronization signal - gpio pin (active high) - -Example: -&dsi { - ... - - panel@0 { - compatible = "samsung,s6e63j0x03"; - reg = <0>; - vdd3-supply = <&ldo16_reg>; - vci-supply = <&ldo20_reg>; - reset-gpios = <&gpe0 1 GPIO_ACTIVE_LOW>; - te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>; - }; -}; diff --git a/dts/Bindings/display/panel/samsung,s6e63m0.txt b/dts/Bindings/display/panel/samsung,s6e63m0.txt deleted file mode 100644 index 9fb9ebeef8..0000000000 --- a/dts/Bindings/display/panel/samsung,s6e63m0.txt +++ /dev/null @@ -1,33 +0,0 @@ -Samsung s6e63m0 AMOLED LCD panel - -Required properties: - - compatible: "samsung,s6e63m0" - - reset-gpios: GPIO spec for reset pin - - vdd3-supply: VDD regulator - - vci-supply: VCI regulator - -The panel must obey rules for SPI slave device specified in document [1]. - -The device node can contain one 'port' child node with one child -'endpoint' node, according to the bindings defined in [2]. This -node should describe panel's video bus. - -[1]: Documentation/devicetree/bindings/spi/spi-bus.txt -[2]: Documentation/devicetree/bindings/media/video-interfaces.txt - -Example: - - s6e63m0: display@0 { - compatible = "samsung,s6e63m0"; - reg = <0>; - reset-gpio = <&mp05 5 1>; - vdd3-supply = <&ldo12_reg>; - vci-supply = <&ldo11_reg>; - spi-max-frequency = <1200000>; - - port { - lcd_ep: endpoint { - remote-endpoint = <&fimd_ep>; - }; - }; - }; diff --git a/dts/Bindings/display/panel/samsung,s6e63m0.yaml b/dts/Bindings/display/panel/samsung,s6e63m0.yaml new file mode 100644 index 0000000000..6f1fc7469f --- /dev/null +++ b/dts/Bindings/display/panel/samsung,s6e63m0.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/samsung,s6e63m0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung s6e63m0 AMOLED LCD panel + +maintainers: + - Jonathan Bakker <xc-racer2@live.ca> + +allOf: + - $ref: panel-common.yaml# + - $ref: /schemas/leds/backlight/common.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + const: samsung,s6e63m0 + + reg: true + reset-gpios: true + port: true + default-brightness: true + max-brightness: true + + spi-3wire: true + spi-cpha: true + spi-cpol: true + + vdd3-supply: + description: VDD regulator + + vci-supply: + description: VCI regulator + +required: + - compatible + - reset-gpios + - vdd3-supply + - vci-supply + +unevaluatedProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + display@0 { + compatible = "samsung,s6e63m0"; + reg = <0>; + reset-gpios = <&mp05 5 1>; + vdd3-supply = <&ldo12_reg>; + vci-supply = <&ldo11_reg>; + spi-max-frequency = <1200000>; + + port { + lcd_ep: endpoint { + remote-endpoint = <&fimd_ep>; + }; + }; + }; + }; + +... diff --git a/dts/Bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml b/dts/Bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml index 7a685d0428..b749e9e906 100644 --- a/dts/Bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml +++ b/dts/Bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml @@ -16,15 +16,17 @@ properties: compatible: const: samsung,s6e88a0-ams452ef01 reg: true + port: true reset-gpios: true vdd3-supply: - description: core voltage supply + description: core voltage supply vci-supply: - description: voltage supply for analog circuits + description: voltage supply for analog circuits required: - compatible - reg + - port - vdd3-supply - vci-supply - reset-gpios @@ -46,5 +48,11 @@ examples: vdd3-supply = <&pm8916_l17>; vci-supply = <®_vlcd_vci>; reset-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; }; }; diff --git a/dts/Bindings/display/panel/samsung,s6e8aa0.txt b/dts/Bindings/display/panel/samsung,s6e8aa0.txt deleted file mode 100644 index 9e766c5f86..0000000000 --- a/dts/Bindings/display/panel/samsung,s6e8aa0.txt +++ /dev/null @@ -1,56 +0,0 @@ -Samsung S6E8AA0 AMOLED LCD 5.3 inch panel - -Required properties: - - compatible: "samsung,s6e8aa0" - - reg: the virtual channel number of a DSI peripheral - - vdd3-supply: core voltage supply - - vci-supply: voltage supply for analog circuits - - reset-gpios: a GPIO spec for the reset pin - - display-timings: timings for the connected panel as described by [1] - -Optional properties: - - power-on-delay: delay after turning regulators on [ms] - - reset-delay: delay after reset sequence [ms] - - init-delay: delay after initialization sequence [ms] - - panel-width-mm: physical panel width [mm] - - panel-height-mm: physical panel height [mm] - - flip-horizontal: boolean to flip image horizontally - - flip-vertical: boolean to flip image vertically - -The device node can contain one 'port' child node with one child -'endpoint' node, according to the bindings defined in [2]. This -node should describe panel's video bus. - -[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt -[2]: Documentation/devicetree/bindings/media/video-interfaces.txt - -Example: - - panel { - compatible = "samsung,s6e8aa0"; - reg = <0>; - vdd3-supply = <&vcclcd_reg>; - vci-supply = <&vlcd_reg>; - reset-gpios = <&gpy4 5 0>; - power-on-delay= <50>; - reset-delay = <100>; - init-delay = <100>; - panel-width-mm = <58>; - panel-height-mm = <103>; - flip-horizontal; - flip-vertical; - - display-timings { - timing0: timing-0 { - clock-frequency = <57153600>; - hactive = <720>; - vactive = <1280>; - hfront-porch = <5>; - hback-porch = <5>; - hsync-len = <5>; - vfront-porch = <13>; - vback-porch = <1>; - vsync-len = <2>; - }; - }; - }; diff --git a/dts/Bindings/display/panel/samsung,s6e8aa0.yaml b/dts/Bindings/display/panel/samsung,s6e8aa0.yaml new file mode 100644 index 0000000000..200fbf1c74 --- /dev/null +++ b/dts/Bindings/display/panel/samsung,s6e8aa0.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/samsung,s6e8aa0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S6E8AA0 AMOLED LCD 5.3 inch panel + +maintainers: + - Andrzej Hajda <a.hajda@samsung.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: samsung,s6e8aa0 + + reg: true + reset-gpios: true + display-timings: true + + vdd3-supply: + description: core voltage supply + + vci-supply: + description: voltage supply for analog circuits + + power-on-delay: + description: delay after turning regulators on [ms] + $ref: /schemas/types.yaml#/definitions/uint32 + + reset-delay: + description: delay after reset sequence [ms] + $ref: /schemas/types.yaml#/definitions/uint32 + + init-delay: + description: delay after initialization sequence [ms] + $ref: /schemas/types.yaml#/definitions/uint32 + + panel-width-mm: + description: physical panel width [mm] + + panel-height-mm: + description: physical panel height [mm] + + flip-horizontal: + description: boolean to flip image horizontally + type: boolean + + flip-vertical: + description: boolean to flip image vertically + type: boolean + +required: + - compatible + - reg + - vdd3-supply + - vci-supply + - reset-gpios + - display-timings + +additionalProperties: false + +examples: + - | + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "samsung,s6e8aa0"; + reg = <0>; + vdd3-supply = <&vcclcd_reg>; + vci-supply = <&vlcd_reg>; + reset-gpios = <&gpy4 5 0>; + power-on-delay = <50>; + reset-delay = <100>; + init-delay = <100>; + panel-width-mm = <58>; + panel-height-mm = <103>; + flip-horizontal; + flip-vertical; + + display-timings { + timing0: timing-0 { + clock-frequency = <57153600>; + hactive = <720>; + vactive = <1280>; + hfront-porch = <5>; + hback-porch = <5>; + hsync-len = <5>; + vfront-porch = <13>; + vback-porch = <1>; + vsync-len = <2>; + }; + }; + }; + }; + +... diff --git a/dts/Bindings/display/panel/seiko,43wvf1g.txt b/dts/Bindings/display/panel/seiko,43wvf1g.txt deleted file mode 100644 index aae57ef36c..0000000000 --- a/dts/Bindings/display/panel/seiko,43wvf1g.txt +++ /dev/null @@ -1,23 +0,0 @@ -Seiko Instruments Inc. 4.3" WVGA (800 x RGB x 480) TFT with Touch-Panel - -Required properties: -- compatible: should be "sii,43wvf1g". -- "dvdd-supply": 3v3 digital regulator. -- "avdd-supply": 5v analog regulator. - -Optional properties: -- backlight: phandle for the backlight control. - -Example: - - panel { - compatible = "sii,43wvf1g"; - backlight = <&backlight_display>; - dvdd-supply = <®_lcd_3v3>; - avdd-supply = <®_lcd_5v>; - port { - panel_in: endpoint { - remote-endpoint = <&display_out>; - }; - }; - }; diff --git a/dts/Bindings/display/panel/seiko,43wvf1g.yaml b/dts/Bindings/display/panel/seiko,43wvf1g.yaml new file mode 100644 index 0000000000..1df3cbb51f --- /dev/null +++ b/dts/Bindings/display/panel/seiko,43wvf1g.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/seiko,43wvf1g.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Seiko Instruments Inc. 4.3" WVGA (800 x RGB x 480) TFT with Touch-Panel + +maintainers: + - Fabio Estevam <festevam@gmail.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: sii,43wvf1g + + backlight: true + port: true + + dvdd-supply: + description: 3v3 digital regulator + + avdd-supply: + description: 5v analog regulator + + enable-gpios: true + +required: + - compatible + - dvdd-supply + - avdd-supply + +additionalProperties: false + +examples: + - | + panel { + compatible = "sii,43wvf1g"; + + backlight = <&backlight_display>; + dvdd-supply = <®_lcd_3v3>; + avdd-supply = <®_lcd_5v>; + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; + +... diff --git a/dts/Bindings/display/panel/sgd,gktw70sdae4se.yaml b/dts/Bindings/display/panel/sgd,gktw70sdae4se.yaml index e63a570ae5..e32d9188a3 100644 --- a/dts/Bindings/display/panel/sgd,gktw70sdae4se.yaml +++ b/dts/Bindings/display/panel/sgd,gktw70sdae4se.yaml @@ -7,17 +7,27 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Solomon Goldentek Display GKTW70SDAE4SE 7" WVGA LVDS Display Panel maintainers: - - Neil Armstrong <narmstrong@baylibre.com> + - Neil Armstrong <neil.armstrong@linaro.org> - Thierry Reding <thierry.reding@gmail.com> allOf: - - $ref: lvds.yaml# + - $ref: panel-common.yaml# + - $ref: /schemas/display/lvds.yaml# + +select: + properties: + compatible: + contains: + const: sgd,gktw70sdae4se + + required: + - compatible properties: compatible: items: - const: sgd,gktw70sdae4se - - {} # panel-lvds, but not listed here to avoid false select + - const: panel-lvds data-mapping: const: jeida-18 @@ -35,6 +45,11 @@ additionalProperties: false required: - compatible + - port + - data-mapping + - width-mm + - height-mm + - panel-timing examples: - |+ diff --git a/dts/Bindings/display/panel/sharp,lq101r1sx01.txt b/dts/Bindings/display/panel/sharp,lq101r1sx01.txt deleted file mode 100644 index f522bb8e47..0000000000 --- a/dts/Bindings/display/panel/sharp,lq101r1sx01.txt +++ /dev/null @@ -1,49 +0,0 @@ -Sharp Microelectronics 10.1" WQXGA TFT LCD panel - -This panel requires a dual-channel DSI host to operate. It supports two modes: -- left-right: each channel drives the left or right half of the screen -- even-odd: each channel drives the even or odd lines of the screen - -Each of the DSI channels controls a separate DSI peripheral. The peripheral -driven by the first link (DSI-LINK1), left or even, is considered the primary -peripheral and controls the device. The 'link2' property contains a phandle -to the peripheral driven by the second link (DSI-LINK2, right or odd). - -Note that in video mode the DSI-LINK1 interface always provides the left/even -pixels and DSI-LINK2 always provides the right/odd pixels. In command mode it -is possible to program either link to drive the left/even or right/odd pixels -but for the sake of consistency this binding assumes that the same assignment -is chosen as for video mode. - -Required properties: -- compatible: should be "sharp,lq101r1sx01" -- reg: DSI virtual channel of the peripheral - -Required properties (for DSI-LINK1 only): -- link2: phandle to the DSI peripheral on the secondary link. Note that the - presence of this property marks the containing node as DSI-LINK1. -- power-supply: phandle of the regulator that provides the supply voltage - -Optional properties (for DSI-LINK1 only): -- backlight: phandle of the backlight device attached to the panel - -Example: - - dsi@54300000 { - panel: panel@0 { - compatible = "sharp,lq101r1sx01"; - reg = <0>; - - link2 = <&secondary>; - - power-supply = <...>; - backlight = <...>; - }; - }; - - dsi@54400000 { - secondary: panel@0 { - compatible = "sharp,lq101r1sx01"; - reg = <0>; - }; - }; diff --git a/dts/Bindings/display/panel/sharp,lq101r1sx01.yaml b/dts/Bindings/display/panel/sharp,lq101r1sx01.yaml new file mode 100644 index 0000000000..57b44a0e76 --- /dev/null +++ b/dts/Bindings/display/panel/sharp,lq101r1sx01.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/sharp,lq101r1sx01.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sharp Microelectronics 10.1" WQXGA TFT LCD panel + +maintainers: + - Thierry Reding <treding@nvidia.com> + +description: | + This panel requires a dual-channel DSI host to operate. It supports two modes: + - left-right: each channel drives the left or right half of the screen + - even-odd: each channel drives the even or odd lines of the screen + + Each of the DSI channels controls a separate DSI peripheral. The peripheral + driven by the first link (DSI-LINK1), left or even, is considered the primary + peripheral and controls the device. The 'link2' property contains a phandle + to the peripheral driven by the second link (DSI-LINK2, right or odd). + + Note that in video mode the DSI-LINK1 interface always provides the left/even + pixels and DSI-LINK2 always provides the right/odd pixels. In command mode it + is possible to program either link to drive the left/even or right/odd pixels + but for the sake of consistency this binding assumes that the same assignment + is chosen as for video mode. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + oneOf: + - items: + - const: sharp,lq101r1sx03 + - const: sharp,lq101r1sx01 + - enum: + - sharp,lq101r1sx01 + + reg: true + power-supply: true + backlight: true + + link2: + $ref: /schemas/types.yaml#/definitions/phandle + description: | + phandle to the DSI peripheral on the secondary link. Note that the + presence of this property marks the containing node as DSI-LINK1 + +required: + - compatible + - reg + +if: + required: + - link2 +then: + required: + - power-supply + +additionalProperties: false + +examples: + - | + dsi0: dsi@fd922800 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0xfd922800 0x200>; + + panel: panel@0 { + compatible = "sharp,lq101r1sx01"; + reg = <0>; + + link2 = <&secondary>; + + power-supply = <&power>; + backlight = <&backlight>; + }; + }; + + dsi1: dsi@fd922a00 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0xfd922a00 0x200>; + + secondary: panel@0 { + compatible = "sharp,lq101r1sx01"; + reg = <0>; + }; + }; + +... diff --git a/dts/Bindings/display/panel/sharp,lq150x1lg11.txt b/dts/Bindings/display/panel/sharp,lq150x1lg11.txt deleted file mode 100644 index 0f57c31435..0000000000 --- a/dts/Bindings/display/panel/sharp,lq150x1lg11.txt +++ /dev/null @@ -1,36 +0,0 @@ -Sharp 15" LQ150X1LG11 XGA TFT LCD panel - -Required properties: -- compatible: should be "sharp,lq150x1lg11" -- power-supply: regulator to provide the VCC supply voltage (3.3 volts) - -Optional properties: -- backlight: phandle of the backlight device -- rlud-gpios: a single GPIO for the RL/UD (rotate 180 degrees) pin. -- sellvds-gpios: a single GPIO for the SELLVDS pin. - -If rlud-gpios and/or sellvds-gpios are not specified, the RL/UD and/or SELLVDS -pins are assumed to be handled appropriately by the hardware. - -Example: - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm 0 100000>; /* VBR */ - - brightness-levels = <0 20 40 60 80 100>; - default-brightness-level = <2>; - - power-supply = <&vdd_12v_reg>; /* VDD */ - enable-gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; /* XSTABY */ - }; - - panel { - compatible = "sharp,lq150x1lg11"; - - power-supply = <&vcc_3v3_reg>; /* VCC */ - - backlight = <&backlight>; - rlud-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; /* RL/UD */ - sellvds-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; /* SELLVDS */ - }; diff --git a/dts/Bindings/display/panel/sharp,lq150x1lg11.yaml b/dts/Bindings/display/panel/sharp,lq150x1lg11.yaml new file mode 100644 index 0000000000..92f2d12f4f --- /dev/null +++ b/dts/Bindings/display/panel/sharp,lq150x1lg11.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/sharp,lq150x1lg11.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sharp 15" LQ150X1LG11 XGA TFT LCD panel + +maintainers: + - Peter Rosin <peda@axentia.se> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: sharp,lq150x1lg11 + + power-supply: true + backlight: true + + rlud-gpios: + maxItems: 1 + description: | + GPIO for the RL/UD (rotate 180 degrees) pin. + If rlud-gpios and/or sellvds-gpios are not specified, + the RL/UD and/or SELLVDS pins are assumed to be handled + appropriately by the hardware. + + sellvds-gpios: + maxItems: 1 + description: | + GPIO for the SELLVDS pin. + If rlud-gpios and/or sellvds-gpios are not specified, + the RL/UD and/or SELLVDS pins are assumed to be handled + appropriately by the hardware. + +required: + - compatible + - power-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + panel { + compatible = "sharp,lq150x1lg11"; + + power-supply = <&vcc_3v3_reg>; /* VCC */ + + backlight = <&backlight>; + rlud-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; /* RL/UD */ + sellvds-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; /* SELLVDS */ + }; + +... diff --git a/dts/Bindings/display/panel/sharp,ls037v7dw01.txt b/dts/Bindings/display/panel/sharp,ls037v7dw01.txt deleted file mode 100644 index 0cc8981e9d..0000000000 --- a/dts/Bindings/display/panel/sharp,ls037v7dw01.txt +++ /dev/null @@ -1,43 +0,0 @@ -SHARP LS037V7DW01 TFT-LCD panel -=================================== - -Required properties: -- compatible: "sharp,ls037v7dw01" - -Optional properties: -- label: a symbolic name for the panel -- enable-gpios: a GPIO spec for the optional enable pin. - This pin is the INI pin as specified in the LS037V7DW01.pdf file. -- reset-gpios: a GPIO spec for the optional reset pin. - This pin is the RESB pin as specified in the LS037V7DW01.pdf file. -- mode-gpios: a GPIO - ordered MO, LR, and UD as specified in the LS037V7DW01.pdf file. - -Required nodes: -- Video port for DPI input - -This panel can have zero to five GPIOs to configure to change configuration -between QVGA and VGA mode and the scan direction. As these pins can be also -configured with external pulls, all the GPIOs are considered optional with holes -in the array. - -Example -------- - -Example when connected to a omap2+ based device: - -lcd0: display { - compatible = "sharp,ls037v7dw01"; - power-supply = <&lcd_3v3>; - enable-gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>; /* gpio152, lcd INI */ - reset-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd RESB */ - mode-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH /* gpio154, lcd MO */ - &gpio1 2 GPIO_ACTIVE_HIGH /* gpio2, lcd LR */ - &gpio1 3 GPIO_ACTIVE_HIGH>; /* gpio3, lcd UD */ - - port { - lcd_in: endpoint { - remote-endpoint = <&dpi_out>; - }; - }; -}; diff --git a/dts/Bindings/display/panel/sharp,ls037v7dw01.yaml b/dts/Bindings/display/panel/sharp,ls037v7dw01.yaml new file mode 100644 index 0000000000..8c47a9b0b5 --- /dev/null +++ b/dts/Bindings/display/panel/sharp,ls037v7dw01.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/sharp,ls037v7dw01.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SHARP LS037V7DW01 TFT-LCD panel + +description: | + This panel can have zero to five GPIOs to configure to change configuration + between QVGA and VGA mode and the scan direction. As these pins can be also + configured with external pulls, all the GPIOs are considered optional with holes + in the array. + +maintainers: + - Tony Lindgren <tony@atomide.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: sharp,ls037v7dw01 + + label: true + enable-gpios: true + reset-gpios: true + port: true + power-supply: true + + mode-gpios: + minItems: 1 + maxItems: 3 + description: | + GPIO ordered MO, LR, and UD as specified in LS037V7DW01.pdf + This panel can have zero to three GPIOs to configure to + change configuration between QVGA and VGA mode and the + scan direction. As these pins can be also configured + with external pulls, all the GPIOs are considered + optional with holes in the array. + +required: + - compatible + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + lcd0: display { + compatible = "sharp,ls037v7dw01"; + power-supply = <&lcd_3v3>; + enable-gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>; /* gpio152, lcd INI */ + reset-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd RESB */ + mode-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH /* gpio154, lcd MO */ + &gpio1 2 GPIO_ACTIVE_HIGH /* gpio2, lcd LR */ + &gpio1 3 GPIO_ACTIVE_HIGH>; /* gpio3, lcd UD */ + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + }; + +... diff --git a/dts/Bindings/display/panel/sharp,ls043t1le01.txt b/dts/Bindings/display/panel/sharp,ls043t1le01.txt deleted file mode 100644 index 3770a11196..0000000000 --- a/dts/Bindings/display/panel/sharp,ls043t1le01.txt +++ /dev/null @@ -1,22 +0,0 @@ -Sharp Microelectronics 4.3" qHD TFT LCD panel - -Required properties: -- compatible: should be "sharp,ls043t1le01-qhd" -- reg: DSI virtual channel of the peripheral -- power-supply: phandle of the regulator that provides the supply voltage - -Optional properties: -- backlight: phandle of the backlight device attached to the panel -- reset-gpios: a GPIO spec for the reset pin - -Example: - - mdss_dsi@fd922800 { - panel@0 { - compatible = "sharp,ls043t1le01-qhd"; - reg = <0>; - avdd-supply = <&pm8941_l22>; - backlight = <&pm8941_wled>; - reset-gpios = <&pm8941_gpios 19 GPIO_ACTIVE_HIGH>; - }; - }; diff --git a/dts/Bindings/display/panel/sharp,ls043t1le01.yaml b/dts/Bindings/display/panel/sharp,ls043t1le01.yaml new file mode 100644 index 0000000000..a90d0d8bf7 --- /dev/null +++ b/dts/Bindings/display/panel/sharp,ls043t1le01.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/sharp,ls043t1le01.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sharp Microelectronics 4.3" qHD TFT LCD panel + +maintainers: + - Werner Johansson <werner.johansson@sonymobile.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: sharp,ls043t1le01-qhd + + reg: true + backlight: true + reset-gpios: true + port: true + + avdd-supply: + description: handle of the regulator that provides the supply voltage + +required: + - compatible + - reg + - avdd-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "sharp,ls043t1le01-qhd"; + reg = <0>; + avdd-supply = <&pm8941_l22>; + backlight = <&pm8941_wled>; + reset-gpios = <&pm8941_gpios 19 GPIO_ACTIVE_HIGH>; + }; + }; + +... diff --git a/dts/Bindings/display/panel/sharp,ls060t1sx01.yaml b/dts/Bindings/display/panel/sharp,ls060t1sx01.yaml new file mode 100644 index 0000000000..271c097cc9 --- /dev/null +++ b/dts/Bindings/display/panel/sharp,ls060t1sx01.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/sharp,ls060t1sx01.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sharp Microelectronics 6.0" FullHD TFT LCD panel + +maintainers: + - Dmitry Baryskov <dmitry.baryshkov@linaro.org> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: sharp,ls060t1sx01 + + reg: true + backlight: true + reset-gpios: true + port: true + + avdd-supply: + description: handle of the regulator that provides the positive supply voltage + avee-supply: + description: handle of the regulator that provides the negative supply voltage + vddi-supply: + description: handle of the regulator that provides the I/O supply voltage + vddh-supply: + description: handle of the regulator that provides the analog supply voltage + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "sharp,ls060t1sx01"; + reg = <0>; + avdd-supply = <&pm8941_l22>; + backlight = <&backlight>; + reset-gpios = <&pm8916_gpios 25 GPIO_ACTIVE_LOW>; + }; + }; + +... diff --git a/dts/Bindings/display/panel/simple-panel.txt b/dts/Bindings/display/panel/simple-panel.txt deleted file mode 100644 index e11208fb7d..0000000000 --- a/dts/Bindings/display/panel/simple-panel.txt +++ /dev/null @@ -1 +0,0 @@ -See panel-common.yaml in this directory. diff --git a/dts/Bindings/display/panel/sitronix,st7701.txt b/dts/Bindings/display/panel/sitronix,st7701.txt deleted file mode 100644 index ccd17597f1..0000000000 --- a/dts/Bindings/display/panel/sitronix,st7701.txt +++ /dev/null @@ -1,30 +0,0 @@ -Sitronix ST7701 based LCD panels - -ST7701 designed for small and medium sizes of TFT LCD display, is -capable of supporting up to 480RGBX864 in resolution. It provides -several system interfaces like MIPI/RGB/SPI. - -Techstar TS8550B is 480x854, 2-lane MIPI DSI LCD panel which has -inbuilt ST7701 chip. - -Required properties: -- compatible: must be "sitronix,st7701" and one of - * "techstar,ts8550b" -- reset-gpios: a GPIO phandle for the reset pin - -Required properties for techstar,ts8550b: -- reg: DSI virtual channel used by that screen -- VCC-supply: analog regulator for MIPI circuit -- IOVCC-supply: I/O system regulator - -Optional properties: -- backlight: phandle for the backlight control. - -panel@0 { - compatible = "techstar,ts8550b", "sitronix,st7701"; - reg = <0>; - VCC-supply = <®_dldo2>; - IOVCC-supply = <®_dldo2>; - reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */ - backlight = <&backlight>; -}; diff --git a/dts/Bindings/display/panel/sitronix,st7701.yaml b/dts/Bindings/display/panel/sitronix,st7701.yaml new file mode 100644 index 0000000000..b348f5bf0a --- /dev/null +++ b/dts/Bindings/display/panel/sitronix,st7701.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/sitronix,st7701.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sitronix ST7701 based LCD panels + +maintainers: + - Jagan Teki <jagan@amarulasolutions.com> + +description: | + ST7701 designed for small and medium sizes of TFT LCD display, is + capable of supporting up to 480RGBX864 in resolution. It provides + several system interfaces like MIPI/RGB/SPI. + + Techstar TS8550B is 480x854, 2-lane MIPI DSI LCD panel which has + inbuilt ST7701 chip. + + Densitron DMT028VGHMCMI-1A is 480x640, 2-lane MIPI DSI LCD panel + which has built-in ST7701 chip. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - enum: + - anbernic,rg-arc-panel + - densitron,dmt028vghmcmi-1a + - elida,kd50t048a + - techstar,ts8550b + - const: sitronix,st7701 + + reg: + description: DSI virtual channel used by that screen + maxItems: 1 + + VCC-supply: + description: analog regulator for MIPI circuit + + IOVCC-supply: + description: I/O system regulator + + port: true + reset-gpios: true + rotation: true + + backlight: true + +required: + - compatible + - reg + - VCC-supply + - IOVCC-supply + - port + - reset-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "techstar,ts8550b", "sitronix,st7701"; + reg = <0>; + VCC-supply = <®_dldo2>; + IOVCC-supply = <®_dldo2>; + reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */ + backlight = <&backlight>; + + port { + mipi_in_panel: endpoint { + remote-endpoint = <&mipi_out_panel>; + }; + }; + }; + }; diff --git a/dts/Bindings/display/panel/sitronix,st7789v.txt b/dts/Bindings/display/panel/sitronix,st7789v.txt deleted file mode 100644 index c6995dde64..0000000000 --- a/dts/Bindings/display/panel/sitronix,st7789v.txt +++ /dev/null @@ -1,37 +0,0 @@ -Sitronix ST7789V RGB panel with SPI control bus - -Required properties: - - compatible: "sitronix,st7789v" - - reg: Chip select of the panel on the SPI bus - - reset-gpios: a GPIO phandle for the reset pin - - power-supply: phandle of the regulator that provides the supply voltage - -Optional properties: - - backlight: phandle to the backlight used - -The generic bindings for the SPI slaves documented in [1] also applies - -The device node can contain one 'port' child node with one child -'endpoint' node, according to the bindings defined in [2]. This -node should describe panel's video bus. - -[1]: Documentation/devicetree/bindings/spi/spi-bus.txt -[2]: Documentation/devicetree/bindings/graph.txt - -Example: - -panel@0 { - compatible = "sitronix,st7789v"; - reg = <0>; - reset-gpios = <&pio 6 11 GPIO_ACTIVE_LOW>; - backlight = <&pwm_bl>; - spi-max-frequency = <100000>; - spi-cpol; - spi-cpha; - - port { - panel_input: endpoint { - remote-endpoint = <&tcon0_out_panel>; - }; - }; -}; diff --git a/dts/Bindings/display/panel/sitronix,st7789v.yaml b/dts/Bindings/display/panel/sitronix,st7789v.yaml new file mode 100644 index 0000000000..ef162b51d0 --- /dev/null +++ b/dts/Bindings/display/panel/sitronix,st7789v.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/sitronix,st7789v.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sitronix ST7789V RGB panel with SPI control bus + +maintainers: + - Maxime Ripard <mripard@kernel.org> + +allOf: + - $ref: panel-common.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + enum: + - edt,et028013dma + - inanbo,t28cp45tn89-v17 + - jasonic,jt240mhqs-hwt-ek-e3 + - sitronix,st7789v + + reg: true + reset-gpios: true + power-supply: true + backlight: true + port: true + rotation: true + + spi-cpha: true + spi-cpol: true + + spi-rx-bus-width: + minimum: 0 + maximum: 1 + + dc-gpios: + maxItems: 1 + description: DCX pin, Display data/command selection pin in parallel interface + +required: + - compatible + - reg + - power-supply + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "sitronix,st7789v"; + reg = <0>; + reset-gpios = <&pio 6 11 GPIO_ACTIVE_LOW>; + backlight = <&pwm_bl>; + power-supply = <&power>; + rotation = <180>; + spi-max-frequency = <100000>; + spi-cpol; + spi-cpha; + + port { + panel_input: endpoint { + remote-endpoint = <&tcon0_out_panel>; + }; + }; + }; + }; + +... diff --git a/dts/Bindings/display/panel/sony,acx424akp.yaml b/dts/Bindings/display/panel/sony,acx424akp.yaml index 185dcc8fd1..059cc6dbcf 100644 --- a/dts/Bindings/display/panel/sony,acx424akp.yaml +++ b/dts/Bindings/display/panel/sony,acx424akp.yaml @@ -4,7 +4,12 @@ $id: http://devicetree.org/schemas/display/panel/sony,acx424akp.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Sony ACX424AKP 4" 480x864 AMOLED panel +title: Sony ACX424AKP/ACX424AKM 4" 480x864/480x854 AMOLED panel + +description: The Sony ACX424AKP and ACX424AKM are panels built around + the Novatek NT35560 display controller. The only difference is that + the AKM is configured to use 10 pixels less in the Y axis than the + AKP. maintainers: - Linus Walleij <linus.walleij@linaro.org> @@ -14,11 +19,13 @@ allOf: properties: compatible: - const: sony,acx424akp + enum: + - sony,acx424akp + - sony,acx424akm reg: true reset-gpios: true vddi-supply: - description: regulator that supplies the vddi voltage + description: regulator that supplies the vddi voltage enforce-video-mode: true required: diff --git a/dts/Bindings/display/panel/sony,acx565akm.txt b/dts/Bindings/display/panel/sony,acx565akm.txt deleted file mode 100644 index e123332807..0000000000 --- a/dts/Bindings/display/panel/sony,acx565akm.txt +++ /dev/null @@ -1,30 +0,0 @@ -Sony ACX565AKM SDI Panel -======================== - -Required properties: -- compatible: "sony,acx565akm" - -Optional properties: -- label: a symbolic name for the panel -- reset-gpios: panel reset gpio - -Required nodes: -- Video port for SDI input - -Example -------- - -acx565akm@2 { - compatible = "sony,acx565akm"; - spi-max-frequency = <6000000>; - reg = <2>; - - label = "lcd"; - reset-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* 90 */ - - port { - lcd_in: endpoint { - remote-endpoint = <&sdi_out>; - }; - }; -}; diff --git a/dts/Bindings/display/panel/sony,acx565akm.yaml b/dts/Bindings/display/panel/sony,acx565akm.yaml new file mode 100644 index 0000000000..98abdf4dde --- /dev/null +++ b/dts/Bindings/display/panel/sony,acx565akm.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/sony,acx565akm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sony ACX565AKM SDI Panel + +maintainers: + - Tomi Valkeinen <tomi.valkeinen@ti.com> + +allOf: + - $ref: panel-common.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + const: sony,acx565akm + + label: true + reset-gpios: true + port: true + +required: + - compatible + - port + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + panel@2 { + compatible = "sony,acx565akm"; + spi-max-frequency = <6000000>; + reg = <2>; + + label = "lcd"; + reset-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* 90 */ + + port { + lcd_in: endpoint { + remote-endpoint = <&sdi_out>; + }; + }; + }; + }; + +... diff --git a/dts/Bindings/display/panel/sony,td4353-jdi.yaml b/dts/Bindings/display/panel/sony,td4353-jdi.yaml new file mode 100644 index 0000000000..b6b885b4c2 --- /dev/null +++ b/dts/Bindings/display/panel/sony,td4353-jdi.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/sony,td4353-jdi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sony TD4353 JDI 5 / 5.7" 2160x1080 MIPI-DSI Panel + +maintainers: + - Konrad Dybcio <konrad.dybcio@somainline.org> + +description: | + The Sony TD4353 JDI is a 5 (XZ2c) / 5.7 (XZ2) inch 2160x1080 + MIPI-DSI panel, used in Xperia XZ2 and XZ2 Compact smartphones. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: sony,td4353-jdi-tama + + reg: true + + backlight: true + + vddio-supply: + description: VDDIO 1.8V supply + + vsp-supply: + description: Positive 5.5V supply + + vsn-supply: + description: Negative 5.5V supply + + panel-reset-gpios: + description: Display panel reset pin + + touch-reset-gpios: + description: Touch panel reset pin + + port: true + +required: + - compatible + - reg + - vddio-supply + - vsp-supply + - vsn-supply + - panel-reset-gpios + - touch-reset-gpios + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel: panel@0 { + compatible = "sony,td4353-jdi-tama"; + reg = <0>; + + backlight = <&pmi8998_wled>; + vddio-supply = <&vreg_l14a_1p8>; + vsp-supply = <&lab>; + vsn-supply = <&ibb>; + panel-reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; + touch-reset-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; +... diff --git a/dts/Bindings/display/panel/sony,tulip-truly-nt35521.yaml b/dts/Bindings/display/panel/sony,tulip-truly-nt35521.yaml new file mode 100644 index 0000000000..9679729395 --- /dev/null +++ b/dts/Bindings/display/panel/sony,tulip-truly-nt35521.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/sony,tulip-truly-nt35521.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sony Tulip Truly NT35521 5.24" 1280x720 MIPI-DSI Panel + +maintainers: + - Shawn Guo <shawn.guo@linaro.org> + +description: | + The Sony Tulip Truly NT35521 is a 5.24" 1280x720 MIPI-DSI panel, which + can be found no Sony Xperia M4 phone. The panel backlight is managed + through DSI link. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: sony,tulip-truly-nt35521 + + reg: true + + positive5-supply: + description: Positive 5V supply + + negative5-supply: + description: Negative 5V supply + + reset-gpios: true + + enable-gpios: true + + port: true + +required: + - compatible + - reg + - positive5-supply + - negative5-supply + - reset-gpios + - enable-gpios + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "sony,tulip-truly-nt35521"; + reg = <0>; + positive5-supply = <&positive5_reg>; + negative5-supply = <&negative5_reg>; + reset-gpios = <&msmgpio 25 GPIO_ACTIVE_LOW>; + enable-gpios = <&msmgpio 10 GPIO_ACTIVE_HIGH>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; +... diff --git a/dts/Bindings/display/panel/startek,kd070fhfid015.yaml b/dts/Bindings/display/panel/startek,kd070fhfid015.yaml new file mode 100644 index 0000000000..d817f998cd --- /dev/null +++ b/dts/Bindings/display/panel/startek,kd070fhfid015.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/startek,kd070fhfid015.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Startek Electronic Technology Co. kd070fhfid015 7 inch TFT LCD panel + +maintainers: + - Alexandre Mergnat <amergnat@baylibre.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: startek,kd070fhfid015 + + enable-gpios: true + + iovcc-supply: + description: Reference to the regulator powering the panel IO pins. + + reg: + maxItems: 1 + description: DSI virtual channel + + reset-gpios: true + + port: true + + power-supply: true + +additionalProperties: false + +required: + - compatible + - enable-gpios + - iovcc-supply + - reg + - reset-gpios + - port + - power-supply + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi0 { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "startek,kd070fhfid015"; + reg = <0>; + enable-gpios = <&pio 67 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pio 20 GPIO_ACTIVE_HIGH>; + iovcc-supply = <&mt6357_vsim1_reg>; + power-supply = <&vsys_lcm_reg>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; + }; + +... diff --git a/dts/Bindings/display/panel/startek,startek-kd050c.txt b/dts/Bindings/display/panel/startek,startek-kd050c.txt deleted file mode 100644 index 70cd8d18d8..0000000000 --- a/dts/Bindings/display/panel/startek,startek-kd050c.txt +++ /dev/null @@ -1,4 +0,0 @@ -Startek Electronic Technology Co. KD050C 5.0" WVGA TFT LCD panel - -Required properties: -- compatible: should be "startek,startek-kd050c" diff --git a/dts/Bindings/display/panel/startek,startek-kd050c.yaml b/dts/Bindings/display/panel/startek,startek-kd050c.yaml new file mode 100644 index 0000000000..fd668640af --- /dev/null +++ b/dts/Bindings/display/panel/startek,startek-kd050c.yaml @@ -0,0 +1,33 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/startek,startek-kd050c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Startek Electronic Technology Co. KD050C 5.0" WVGA TFT LCD panel + +maintainers: + - Nikita Kiryanov <nikita@compulab.co.il> + +allOf: + - $ref: panel-dpi.yaml# + +properties: + compatible: + items: + - const: startek,startek-kd050c + - {} # panel-dpi, but not listed here to avoid false select + + backlight: true + enable-gpios: true + height-mm: true + label: true + panel-timing: true + port: true + power-supply: true + reset-gpios: true + width-mm: true + +additionalProperties: false + +... diff --git a/dts/Bindings/display/panel/synaptics,r63353.yaml b/dts/Bindings/display/panel/synaptics,r63353.yaml new file mode 100644 index 0000000000..e5617d1255 --- /dev/null +++ b/dts/Bindings/display/panel/synaptics,r63353.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/synaptics,r63353.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synaptics R63353 based MIPI-DSI panels + +maintainers: + - Michael Trimarchi <michael@amarulasolutions.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - enum: + - sharp,ls068b3sx02 + - const: syna,r63353 + + avdd-supply: true + dvdd-supply: true + reg: true + +required: + - compatible + - avdd-supply + - dvdd-supply + - reg + - reset-gpios + - port + - backlight + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "sharp,ls068b3sx02", "syna,r63353"; + reg = <0>; + avdd-supply = <&avdd_display>; + dvdd-supply = <&dvdd_display>; + reset-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL05 */ + backlight = <&backlight>; + + port { + panel_in: endpoint { + remote-endpoint = <&mipi_dsi_out>; + }; + }; + }; + }; + +... diff --git a/dts/Bindings/display/panel/tpo,td.yaml b/dts/Bindings/display/panel/tpo,td.yaml new file mode 100644 index 0000000000..e8c8ee8d7c --- /dev/null +++ b/dts/Bindings/display/panel/tpo,td.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/tpo,td.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Toppoly TD Panels + +maintainers: + - Marek Belisko <marek@goldelico.com> + - H. Nikolaus Schaller <hns@goldelico.com> + +allOf: + - $ref: panel-common.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + enum: + # Toppoly TD028TTEC1 Panel + - tpo,td028ttec1 + # Toppoly TD043MTEA1 Panel + - tpo,td043mtea1 + + reg: true + label: true + reset-gpios: true + backlight: true + port: true + + spi-cpha: true + spi-cpol: true + +required: + - compatible + - port + +unevaluatedProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + panel: panel@0 { + compatible = "tpo,td043mtea1"; + reg = <0>; + spi-max-frequency = <100000>; + spi-cpol; + spi-cpha; + + label = "lcd"; + + reset-gpios = <&gpio7 7 0>; + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + }; + }; + +... diff --git a/dts/Bindings/display/panel/tpo,td028ttec1.txt b/dts/Bindings/display/panel/tpo,td028ttec1.txt deleted file mode 100644 index 898e06ecf4..0000000000 --- a/dts/Bindings/display/panel/tpo,td028ttec1.txt +++ /dev/null @@ -1,32 +0,0 @@ -Toppoly TD028TTEC1 Panel -======================== - -Required properties: -- compatible: "tpo,td028ttec1" - -Optional properties: -- label: a symbolic name for the panel -- backlight: phandle of the backlight device - -Required nodes: -- Video port for DPI input - -Example -------- - -lcd-panel: td028ttec1@0 { - compatible = "tpo,td028ttec1"; - reg = <0>; - spi-max-frequency = <100000>; - spi-cpol; - spi-cpha; - - label = "lcd"; - backlight = <&backlight>; - port { - lcd_in: endpoint { - remote-endpoint = <&dpi_out>; - }; - }; -}; - diff --git a/dts/Bindings/display/panel/tpo,td043mtea1.txt b/dts/Bindings/display/panel/tpo,td043mtea1.txt deleted file mode 100644 index ec6d629751..0000000000 --- a/dts/Bindings/display/panel/tpo,td043mtea1.txt +++ /dev/null @@ -1,33 +0,0 @@ -TPO TD043MTEA1 Panel -==================== - -Required properties: -- compatible: "tpo,td043mtea1" -- reset-gpios: panel reset gpio - -Optional properties: -- label: a symbolic name for the panel - -Required nodes: -- Video port for DPI input - -Example -------- - -lcd-panel: panel@0 { - compatible = "tpo,td043mtea1"; - reg = <0>; - spi-max-frequency = <100000>; - spi-cpol; - spi-cpha; - - label = "lcd"; - - reset-gpios = <&gpio7 7 0>; - - port { - lcd_in: endpoint { - remote-endpoint = <&dpi_out>; - }; - }; -}; diff --git a/dts/Bindings/display/panel/tpo,tpg110.yaml b/dts/Bindings/display/panel/tpo,tpg110.yaml index a51660b73f..f0243d1961 100644 --- a/dts/Bindings/display/panel/tpo,tpg110.yaml +++ b/dts/Bindings/display/panel/tpo,tpg110.yaml @@ -41,6 +41,7 @@ description: |+ allOf: - $ref: panel-common.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# properties: compatible: @@ -72,6 +73,8 @@ required: - spi-max-frequency - port +unevaluatedProperties: false + examples: - |+ spi { diff --git a/dts/Bindings/display/panel/visionox,r66451.yaml b/dts/Bindings/display/panel/visionox,r66451.yaml new file mode 100644 index 0000000000..6ba3236839 --- /dev/null +++ b/dts/Bindings/display/panel/visionox,r66451.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/visionox,r66451.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Visionox R66451 AMOLED DSI Panel + +maintainers: + - Jessica Zhang <quic_jesszhan@quicinc.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: visionox,r66451 + + reg: + maxItems: 1 + description: DSI virtual channel + + vddio-supply: true + vdd-supply: true + port: true + reset-gpios: true + +additionalProperties: false + +required: + - compatible + - reg + - vddio-supply + - vdd-supply + - reset-gpios + - port + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "visionox,r66451"; + reg = <0>; + vddio-supply = <&vreg_l12c_1p8>; + vdd-supply = <&vreg_l13c_3p0>; + + reset-gpios = <&tlmm 24 GPIO_ACTIVE_LOW>; + + port { + panel0_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; +... diff --git a/dts/Bindings/display/panel/visionox,rm69299.yaml b/dts/Bindings/display/panel/visionox,rm69299.yaml new file mode 100644 index 0000000000..fa745a6f44 --- /dev/null +++ b/dts/Bindings/display/panel/visionox,rm69299.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/visionox,rm69299.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Visionox model RM69299 Panels + +maintainers: + - Harigovindan P <harigovi@codeaurora.org> + +description: | + This binding is for display panels using a Visionox RM692999 panel. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: visionox,rm69299-1080p-display + + reg: true + + vdda-supply: + description: | + Phandle of the regulator that provides the vdda supply voltage. + + vdd3p3-supply: + description: | + Phandle of the regulator that provides the vdd3p3 supply voltage. + + port: true + reset-gpios: true + +additionalProperties: false + +required: + - compatible + - reg + - vdda-supply + - vdd3p3-supply + - reset-gpios + - port + +examples: + - | + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "visionox,rm69299-1080p-display"; + reg = <0>; + + vdda-supply = <&src_pp1800_l8c>; + vdd3p3-supply = <&src_pp2800_l18a>; + + reset-gpios = <&pm6150l_gpio 3 0>; + port { + panel0_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; +... diff --git a/dts/Bindings/display/panel/visionox,vtdr6130.yaml b/dts/Bindings/display/panel/visionox,vtdr6130.yaml new file mode 100644 index 0000000000..d5a8295106 --- /dev/null +++ b/dts/Bindings/display/panel/visionox,vtdr6130.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/visionox,vtdr6130.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Visionox VTDR6130 AMOLED DSI Panel + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: visionox,vtdr6130 + + reg: + maxItems: 1 + description: DSI virtual channel + + vddio-supply: true + vci-supply: true + vdd-supply: true + port: true + reset-gpios: true + +additionalProperties: false + +required: + - compatible + - reg + - vddio-supply + - vci-supply + - vdd-supply + - reset-gpios + - port + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "visionox,vtdr6130"; + reg = <0>; + + vddio-supply = <&vreg_l12b_1p8>; + vci-supply = <&vreg_l13b_3p0>; + vdd-supply = <&vreg_l11b_1p2>; + + reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; + + port { + panel0_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; +... diff --git a/dts/Bindings/display/panel/xinpeng,xpp055c272.yaml b/dts/Bindings/display/panel/xinpeng,xpp055c272.yaml index 6913923df5..c407deb6af 100644 --- a/dts/Bindings/display/panel/xinpeng,xpp055c272.yaml +++ b/dts/Bindings/display/panel/xinpeng,xpp055c272.yaml @@ -17,16 +17,18 @@ properties: const: xinpeng,xpp055c272 reg: true backlight: true + port: true reset-gpios: true iovcc-supply: - description: regulator that supplies the iovcc voltage + description: regulator that supplies the iovcc voltage vci-supply: - description: regulator that supplies the vci voltage + description: regulator that supplies the vci voltage required: - compatible - reg - backlight + - port - iovcc-supply - vci-supply @@ -44,6 +46,12 @@ examples: backlight = <&backlight>; iovcc-supply = <&vcc_1v8>; vci-supply = <&vcc3v3_lcd>; + + port { + mipi_in_panel: endpoint { + remote-endpoint = <&mipi_out_panel>; + }; + }; }; }; diff --git a/dts/Bindings/display/renesas,cmm.yaml b/dts/Bindings/display/renesas,cmm.yaml index a57037b9e9..561efaaa5a 100644 --- a/dts/Bindings/display/renesas,cmm.yaml +++ b/dts/Bindings/display/renesas,cmm.yaml @@ -21,15 +21,15 @@ properties: compatible: oneOf: - items: - - enum: - - renesas,r8a7795-cmm - - renesas,r8a7796-cmm - - renesas,r8a77965-cmm - - renesas,r8a77990-cmm - - renesas,r8a77995-cmm - - const: renesas,rcar-gen3-cmm + - enum: + - renesas,r8a7795-cmm + - renesas,r8a7796-cmm + - renesas,r8a77965-cmm + - renesas,r8a77990-cmm + - renesas,r8a77995-cmm + - const: renesas,rcar-gen3-cmm - items: - - const: renesas,rcar-gen2-cmm + - const: renesas,rcar-gen2-cmm reg: maxItems: 1 @@ -60,7 +60,7 @@ examples: cmm0: cmm@fea40000 { compatible = "renesas,r8a7796-cmm", "renesas,rcar-gen3-cmm"; - reg = <0 0xfea40000 0 0x1000>; + reg = <0xfea40000 0x1000>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; clocks = <&cpg CPG_MOD 711>; resets = <&cpg 711>; diff --git a/dts/Bindings/display/renesas,du.txt b/dts/Bindings/display/renesas,du.txt deleted file mode 100644 index eb4ae41fe4..0000000000 --- a/dts/Bindings/display/renesas,du.txt +++ /dev/null @@ -1,129 +0,0 @@ -* Renesas R-Car Display Unit (DU) - -Required Properties: - - - compatible: must be one of the following. - - "renesas,du-r8a7743" for R8A7743 (RZ/G1M) compatible DU - - "renesas,du-r8a7744" for R8A7744 (RZ/G1N) compatible DU - - "renesas,du-r8a7745" for R8A7745 (RZ/G1E) compatible DU - - "renesas,du-r8a77470" for R8A77470 (RZ/G1C) compatible DU - - "renesas,du-r8a774a1" for R8A774A1 (RZ/G2M) compatible DU - - "renesas,du-r8a774b1" for R8A774B1 (RZ/G2N) compatible DU - - "renesas,du-r8a774c0" for R8A774C0 (RZ/G2E) compatible DU - - "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU - - "renesas,du-r8a7790" for R8A7790 (R-Car H2) compatible DU - - "renesas,du-r8a7791" for R8A7791 (R-Car M2-W) compatible DU - - "renesas,du-r8a7792" for R8A7792 (R-Car V2H) compatible DU - - "renesas,du-r8a7793" for R8A7793 (R-Car M2-N) compatible DU - - "renesas,du-r8a7794" for R8A7794 (R-Car E2) compatible DU - - "renesas,du-r8a7795" for R8A7795 (R-Car H3) compatible DU - - "renesas,du-r8a7796" for R8A7796 (R-Car M3-W) compatible DU - - "renesas,du-r8a77965" for R8A77965 (R-Car M3-N) compatible DU - - "renesas,du-r8a77970" for R8A77970 (R-Car V3M) compatible DU - - "renesas,du-r8a77980" for R8A77980 (R-Car V3H) compatible DU - - "renesas,du-r8a77990" for R8A77990 (R-Car E3) compatible DU - - "renesas,du-r8a77995" for R8A77995 (R-Car D3) compatible DU - - - reg: the memory-mapped I/O registers base address and length - - - interrupts: Interrupt specifiers for the DU interrupts. - - - clocks: A list of phandles + clock-specifier pairs, one for each entry in - the clock-names property. - - clock-names: Name of the clocks. This property is model-dependent. - - R8A7779 uses a single functional clock. The clock doesn't need to be - named. - - All other DU instances use one functional clock per channel The - functional clocks must be named "du.x" with "x" being the channel - numerical index. - - In addition to the functional clocks, all DU versions also support - externally supplied pixel clocks. Those clocks are optional. When - supplied they must be named "dclkin.x" with "x" being the input clock - numerical index. - - - renesas,cmms: A list of phandles to the CMM instances present in the SoC, - one for each available DU channel. The property shall not be specified for - SoCs that do not provide any CMM (such as V3M and V3H). - - - renesas,vsps: A list of phandle and channel index tuples to the VSPs that - handle the memory interfaces for the DU channels. The phandle identifies the - VSP instance that serves the DU channel, and the channel index identifies - the LIF instance in that VSP. - -Required nodes: - -The connections to the DU output video ports are modeled using the OF graph -bindings specified in Documentation/devicetree/bindings/graph.txt. - -The following table lists for each supported model the port number -corresponding to each DU output. - - Port0 Port1 Port2 Port3 ------------------------------------------------------------------------------ - R8A7743 (RZ/G1M) DPAD 0 LVDS 0 - - - R8A7744 (RZ/G1N) DPAD 0 LVDS 0 - - - R8A7745 (RZ/G1E) DPAD 0 DPAD 1 - - - R8A77470 (RZ/G1C) DPAD 0 DPAD 1 LVDS 0 - - R8A774A1 (RZ/G2M) DPAD 0 HDMI 0 LVDS 0 - - R8A774B1 (RZ/G2N) DPAD 0 HDMI 0 LVDS 0 - - R8A774C0 (RZ/G2E) DPAD 0 LVDS 0 LVDS 1 - - R8A7779 (R-Car H1) DPAD 0 DPAD 1 - - - R8A7790 (R-Car H2) DPAD 0 LVDS 0 LVDS 1 - - R8A7791 (R-Car M2-W) DPAD 0 LVDS 0 - - - R8A7792 (R-Car V2H) DPAD 0 DPAD 1 - - - R8A7793 (R-Car M2-N) DPAD 0 LVDS 0 - - - R8A7794 (R-Car E2) DPAD 0 DPAD 1 - - - R8A7795 (R-Car H3) DPAD 0 HDMI 0 HDMI 1 LVDS 0 - R8A7796 (R-Car M3-W) DPAD 0 HDMI 0 LVDS 0 - - R8A77965 (R-Car M3-N) DPAD 0 HDMI 0 LVDS 0 - - R8A77970 (R-Car V3M) DPAD 0 LVDS 0 - - - R8A77980 (R-Car V3H) DPAD 0 LVDS 0 - - - R8A77990 (R-Car E3) DPAD 0 LVDS 0 LVDS 1 - - R8A77995 (R-Car D3) DPAD 0 LVDS 0 LVDS 1 - - - -Example: R8A7795 (R-Car H3) ES2.0 DU - - du: display@feb00000 { - compatible = "renesas,du-r8a7795"; - reg = <0 0xfeb00000 0 0x80000>; - interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>, - <&cpg CPG_MOD 722>, - <&cpg CPG_MOD 721>; - clock-names = "du.0", "du.1", "du.2", "du.3"; - renesas,cmms = <&cmm0>, <&cmm1>, <&cmm2>, <&cmm3>; - renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd0 1>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - du_out_rgb: endpoint { - }; - }; - port@1 { - reg = <1>; - du_out_hdmi0: endpoint { - remote-endpoint = <&dw_hdmi0_in>; - }; - }; - port@2 { - reg = <2>; - du_out_hdmi1: endpoint { - remote-endpoint = <&dw_hdmi1_in>; - }; - }; - port@3 { - reg = <3>; - du_out_lvds0: endpoint { - }; - }; - }; - }; diff --git a/dts/Bindings/display/renesas,du.yaml b/dts/Bindings/display/renesas,du.yaml new file mode 100644 index 0000000000..c5b9e6812b --- /dev/null +++ b/dts/Bindings/display/renesas,du.yaml @@ -0,0 +1,867 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/renesas,du.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car Display Unit (DU) + +maintainers: + - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> + +description: | + These DT bindings describe the Display Unit embedded in the Renesas R-Car + Gen1, R-Car Gen2, R-Car Gen3, RZ/G1 and RZ/G2 SoCs. + +properties: + compatible: + enum: + - renesas,du-r8a7742 # for RZ/G1H compatible DU + - renesas,du-r8a7743 # for RZ/G1M compatible DU + - renesas,du-r8a7744 # for RZ/G1N compatible DU + - renesas,du-r8a7745 # for RZ/G1E compatible DU + - renesas,du-r8a77470 # for RZ/G1C compatible DU + - renesas,du-r8a774a1 # for RZ/G2M compatible DU + - renesas,du-r8a774b1 # for RZ/G2N compatible DU + - renesas,du-r8a774c0 # for RZ/G2E compatible DU + - renesas,du-r8a774e1 # for RZ/G2H compatible DU + - renesas,du-r8a7779 # for R-Car H1 compatible DU + - renesas,du-r8a7790 # for R-Car H2 compatible DU + - renesas,du-r8a7791 # for R-Car M2-W compatible DU + - renesas,du-r8a7792 # for R-Car V2H compatible DU + - renesas,du-r8a7793 # for R-Car M2-N compatible DU + - renesas,du-r8a7794 # for R-Car E2 compatible DU + - renesas,du-r8a7795 # for R-Car H3 compatible DU + - renesas,du-r8a7796 # for R-Car M3-W compatible DU + - renesas,du-r8a77961 # for R-Car M3-W+ compatible DU + - renesas,du-r8a77965 # for R-Car M3-N compatible DU + - renesas,du-r8a77970 # for R-Car V3M compatible DU + - renesas,du-r8a77980 # for R-Car V3H compatible DU + - renesas,du-r8a77990 # for R-Car E3 compatible DU + - renesas,du-r8a77995 # for R-Car D3 compatible DU + - renesas,du-r8a779a0 # for R-Car V3U compatible DU + - renesas,du-r8a779g0 # for R-Car V4H compatible DU + + reg: + maxItems: 1 + + # See compatible-specific constraints below. + clocks: true + clock-names: true + interrupts: + description: Interrupt specifiers, one per DU channel + resets: true + reset-names: true + + power-domains: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: | + The connections to the DU output video ports are modeled using the OF + graph bindings specified in Documentation/devicetree/bindings/graph.txt. + The number of ports and their assignment are model-dependent. Each port + shall have a single endpoint. + + patternProperties: + "^port@[0-3]$": + $ref: /schemas/graph.yaml#/properties/port + unevaluatedProperties: false + + required: + - port@0 + - port@1 + + unevaluatedProperties: false + + renesas,cmms: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 + description: + A list of phandles to the CMM instances present in the SoC, one for each + available DU channel. + + renesas,vsps: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + items: + - description: phandle to VSP instance that serves the DU channel + - description: Channel index identifying the LIF instance in that VSP + description: + A list of phandle and channel index tuples to the VSPs that handle the + memory interfaces for the DU channels. + +required: + - compatible + - reg + - clocks + - interrupts + - ports + +allOf: + - if: + properties: + compatible: + contains: + const: renesas,du-r8a7779 + then: + properties: + clocks: + minItems: 1 + items: + - description: Functional clock + - description: DU_DOTCLKIN0 input clock + - description: DU_DOTCLKIN1 input clock + + clock-names: + minItems: 1 + items: + - const: du.0 + - pattern: '^dclkin\.[01]$' + - pattern: '^dclkin\.[01]$' + + interrupts: + maxItems: 1 + + resets: + maxItems: 1 + + ports: + properties: + port@0: + description: DPAD 0 + port@1: + description: DPAD 1 + # port@2 is TCON, not supported yet + port@2: false + port@3: false + + required: + - port@0 + - port@1 + + required: + - interrupts + + - if: + properties: + compatible: + contains: + enum: + - renesas,du-r8a7743 + - renesas,du-r8a7744 + - renesas,du-r8a7791 + - renesas,du-r8a7793 + then: + properties: + clocks: + minItems: 2 + items: + - description: Functional clock for DU0 + - description: Functional clock for DU1 + - description: DU_DOTCLKIN0 input clock + - description: DU_DOTCLKIN1 input clock + + clock-names: + minItems: 2 + items: + - const: du.0 + - const: du.1 + - pattern: '^dclkin\.[01]$' + - pattern: '^dclkin\.[01]$' + + interrupts: + maxItems: 2 + + resets: + maxItems: 1 + + reset-names: + items: + - const: du.0 + + ports: + properties: + port@0: + description: DPAD 0 + port@1: + description: LVDS 0 + # port@2 is TCON, not supported yet + port@2: false + port@3: false + + required: + - port@0 + - port@1 + + required: + - clock-names + - interrupts + - resets + - reset-names + + - if: + properties: + compatible: + contains: + enum: + - renesas,du-r8a7745 + - renesas,du-r8a7792 + then: + properties: + clocks: + minItems: 2 + items: + - description: Functional clock for DU0 + - description: Functional clock for DU1 + - description: DU_DOTCLKIN0 input clock + - description: DU_DOTCLKIN1 input clock + + clock-names: + minItems: 2 + items: + - const: du.0 + - const: du.1 + - pattern: '^dclkin\.[01]$' + - pattern: '^dclkin\.[01]$' + + interrupts: + maxItems: 2 + + resets: + maxItems: 1 + + reset-names: + items: + - const: du.0 + + ports: + properties: + port@0: + description: DPAD 0 + port@1: + description: DPAD 1 + port@2: false + port@3: false + + required: + - port@0 + - port@1 + + required: + - clock-names + - interrupts + - resets + - reset-names + + - if: + properties: + compatible: + contains: + enum: + - renesas,du-r8a7794 + then: + properties: + clocks: + minItems: 2 + items: + - description: Functional clock for DU0 + - description: Functional clock for DU1 + - description: DU_DOTCLKIN0 input clock + - description: DU_DOTCLKIN1 input clock + + clock-names: + minItems: 2 + items: + - const: du.0 + - const: du.1 + - pattern: '^dclkin\.[01]$' + - pattern: '^dclkin\.[01]$' + + interrupts: + maxItems: 2 + + resets: + maxItems: 1 + + reset-names: + items: + - const: du.0 + + ports: + properties: + port@0: + description: DPAD 0 + port@1: + description: DPAD 1 + # port@2 is TCON, not supported yet + port@2: false + port@3: false + + required: + - port@0 + - port@1 + + required: + - clock-names + - interrupts + - resets + - reset-names + + - if: + properties: + compatible: + contains: + enum: + - renesas,du-r8a77470 + then: + properties: + clocks: + minItems: 2 + items: + - description: Functional clock for DU0 + - description: Functional clock for DU1 + - description: DU_DOTCLKIN0 input clock + - description: DU_DOTCLKIN1 input clock + + clock-names: + minItems: 2 + items: + - const: du.0 + - const: du.1 + - pattern: '^dclkin\.[01]$' + - pattern: '^dclkin\.[01]$' + + interrupts: + maxItems: 2 + + resets: + maxItems: 1 + + reset-names: + items: + - const: du.0 + + ports: + properties: + port@0: + description: DPAD 0 + port@1: + description: DPAD 1 + port@2: + description: LVDS 0 + # port@3 is DVENC, not supported yet + port@3: false + + required: + - port@0 + - port@1 + - port@2 + + required: + - clock-names + - interrupts + - resets + - reset-names + + - if: + properties: + compatible: + contains: + enum: + - renesas,du-r8a7742 + - renesas,du-r8a7790 + then: + properties: + clocks: + minItems: 3 + items: + - description: Functional clock for DU0 + - description: Functional clock for DU1 + - description: Functional clock for DU2 + - description: DU_DOTCLKIN0 input clock + - description: DU_DOTCLKIN1 input clock + - description: DU_DOTCLKIN2 input clock + + clock-names: + minItems: 3 + items: + - const: du.0 + - const: du.1 + - const: du.2 + - pattern: '^dclkin\.[012]$' + - pattern: '^dclkin\.[012]$' + - pattern: '^dclkin\.[012]$' + + interrupts: + maxItems: 3 + + resets: + maxItems: 1 + + reset-names: + items: + - const: du.0 + + ports: + properties: + port@0: + description: DPAD 0 + port@1: + description: LVDS 0 + port@2: + description: LVDS 1 + # port@3 is TCON, not supported yet + port@3: false + + required: + - port@0 + - port@1 + - port@2 + + required: + - clock-names + - interrupts + - resets + - reset-names + + - if: + properties: + compatible: + contains: + enum: + - renesas,du-r8a7795 + then: + properties: + clocks: + minItems: 4 + items: + - description: Functional clock for DU0 + - description: Functional clock for DU1 + - description: Functional clock for DU2 + - description: Functional clock for DU4 + - description: DU_DOTCLKIN0 input clock + - description: DU_DOTCLKIN1 input clock + - description: DU_DOTCLKIN2 input clock + - description: DU_DOTCLKIN3 input clock + + clock-names: + minItems: 4 + items: + - const: du.0 + - const: du.1 + - const: du.2 + - const: du.3 + - pattern: '^dclkin\.[0123]$' + - pattern: '^dclkin\.[0123]$' + - pattern: '^dclkin\.[0123]$' + - pattern: '^dclkin\.[0123]$' + + interrupts: + maxItems: 4 + + resets: + maxItems: 2 + + reset-names: + items: + - const: du.0 + - const: du.2 + + ports: + properties: + port@0: + description: DPAD 0 + port@1: + description: HDMI 0 + port@2: + description: HDMI 1 + port@3: + description: LVDS 0 + + required: + - port@0 + - port@1 + - port@2 + - port@3 + + renesas,cmms: + minItems: 4 + + renesas,vsps: + minItems: 4 + + required: + - clock-names + - interrupts + - resets + - reset-names + - renesas,vsps + + - if: + properties: + compatible: + contains: + enum: + - renesas,du-r8a774a1 + - renesas,du-r8a7796 + - renesas,du-r8a77961 + then: + properties: + clocks: + minItems: 3 + items: + - description: Functional clock for DU0 + - description: Functional clock for DU1 + - description: Functional clock for DU2 + - description: DU_DOTCLKIN0 input clock + - description: DU_DOTCLKIN1 input clock + - description: DU_DOTCLKIN2 input clock + + clock-names: + minItems: 3 + items: + - const: du.0 + - const: du.1 + - const: du.2 + - pattern: '^dclkin\.[012]$' + - pattern: '^dclkin\.[012]$' + - pattern: '^dclkin\.[012]$' + + interrupts: + maxItems: 3 + + resets: + maxItems: 2 + + reset-names: + items: + - const: du.0 + - const: du.2 + + ports: + properties: + port@0: + description: DPAD 0 + port@1: + description: HDMI 0 + port@2: + description: LVDS 0 + port@3: false + + required: + - port@0 + - port@1 + - port@2 + + renesas,cmms: + minItems: 3 + + renesas,vsps: + minItems: 3 + + required: + - clock-names + - interrupts + - resets + - reset-names + - renesas,vsps + + - if: + properties: + compatible: + contains: + enum: + - renesas,du-r8a774b1 + - renesas,du-r8a774e1 + - renesas,du-r8a77965 + then: + properties: + clocks: + minItems: 3 + items: + - description: Functional clock for DU0 + - description: Functional clock for DU1 + - description: Functional clock for DU3 + - description: DU_DOTCLKIN0 input clock + - description: DU_DOTCLKIN1 input clock + - description: DU_DOTCLKIN3 input clock + + clock-names: + minItems: 3 + items: + - const: du.0 + - const: du.1 + - const: du.3 + - pattern: '^dclkin\.[013]$' + - pattern: '^dclkin\.[013]$' + - pattern: '^dclkin\.[013]$' + + interrupts: + maxItems: 3 + + resets: + maxItems: 2 + + reset-names: + items: + - const: du.0 + - const: du.3 + + ports: + properties: + port@0: + description: DPAD 0 + port@1: + description: HDMI 0 + port@2: + description: LVDS 0 + port@3: false + + required: + - port@0 + - port@1 + - port@2 + + renesas,cmms: + minItems: 3 + + renesas,vsps: + minItems: 3 + + required: + - clock-names + - interrupts + - resets + - reset-names + - renesas,vsps + + - if: + properties: + compatible: + contains: + enum: + - renesas,du-r8a77970 + - renesas,du-r8a77980 + then: + properties: + clocks: + minItems: 1 + items: + - description: Functional clock for DU0 + - description: DU_DOTCLKIN0 input clock + + clock-names: + minItems: 1 + items: + - const: du.0 + - const: dclkin.0 + + interrupts: + maxItems: 1 + + resets: + maxItems: 1 + + reset-names: + items: + - const: du.0 + + ports: + properties: + port@0: + description: DPAD 0 + port@1: + description: LVDS 0 + port@2: false + port@3: false + + required: + - port@0 + - port@1 + + renesas,vsps: + minItems: 1 + + required: + - clock-names + - interrupts + - resets + - reset-names + - renesas,vsps + + - if: + properties: + compatible: + contains: + enum: + - renesas,du-r8a774c0 + - renesas,du-r8a77990 + - renesas,du-r8a77995 + then: + properties: + clocks: + minItems: 2 + items: + - description: Functional clock for DU0 + - description: Functional clock for DU1 + - description: DU_DOTCLKIN0 input clock + - description: DU_DOTCLKIN1 input clock + + clock-names: + minItems: 2 + items: + - const: du.0 + - const: du.1 + - pattern: '^dclkin\.[01]$' + - pattern: '^dclkin\.[01]$' + + interrupts: + maxItems: 2 + + resets: + maxItems: 1 + + reset-names: + items: + - const: du.0 + + ports: + properties: + port@0: + description: DPAD 0 + port@1: + description: LVDS 0 + port@2: + description: LVDS 1 + # port@3 is TCON, not supported yet + port@3: false + + required: + - port@0 + - port@1 + - port@2 + + renesas,cmms: + minItems: 2 + + renesas,vsps: + minItems: 2 + + required: + - clock-names + - interrupts + - resets + - reset-names + - renesas,vsps + + - if: + properties: + compatible: + contains: + enum: + - renesas,du-r8a779a0 + - renesas,du-r8a779g0 + then: + properties: + clocks: + items: + - description: Functional clock + + clock-names: + items: + - const: du.0 + + interrupts: + maxItems: 2 + + resets: + maxItems: 1 + + reset-names: + items: + - const: du.0 + + ports: + properties: + port@0: + description: DSI 0 + port@1: + description: DSI 1 + port@2: false + port@3: false + + required: + - port@0 + - port@1 + + renesas,vsps: + minItems: 2 + + required: + - clock-names + - interrupts + - resets + - reset-names + - renesas,vsps + +additionalProperties: false + +examples: + # R-Car H3 ES2.0 DU + - | + #include <dt-bindings/clock/renesas-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + display@feb00000 { + compatible = "renesas,du-r8a7795"; + reg = <0xfeb00000 0x80000>; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 722>, + <&cpg CPG_MOD 721>; + clock-names = "du.0", "du.1", "du.2", "du.3"; + resets = <&cpg 724>, <&cpg 722>; + reset-names = "du.0", "du.2"; + + renesas,cmms = <&cmm0>, <&cmm1>, <&cmm2>, <&cmm3>; + renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd0 1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&adv7123_in>; + }; + }; + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&dw_hdmi0_in>; + }; + }; + port@2 { + reg = <2>; + endpoint { + remote-endpoint = <&dw_hdmi1_in>; + }; + }; + port@3 { + reg = <3>; + endpoint { + remote-endpoint = <&lvds0_in>; + }; + }; + }; + }; + +... diff --git a/dts/Bindings/display/renesas,shmobile-lcdc.yaml b/dts/Bindings/display/renesas,shmobile-lcdc.yaml new file mode 100644 index 0000000000..9816c4cacc --- /dev/null +++ b/dts/Bindings/display/renesas,shmobile-lcdc.yaml @@ -0,0 +1,130 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/renesas,shmobile-lcdc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas SH-Mobile LCD Controller (LCDC) + +maintainers: + - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> + - Geert Uytterhoeven <geert+renesas@glider.be> + +properties: + compatible: + enum: + - renesas,r8a7740-lcdc # R-Mobile A1 + - renesas,sh73a0-lcdc # SH-Mobile AG5 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 5 + description: + Only the functional clock is mandatory. + Some of the optional clocks are model-dependent (e.g. "video" (a.k.a. + "vou" or "dv_clk") is available on R-Mobile A1 only). + + clock-names: + minItems: 1 + items: + - const: fck + - enum: [ media, lclk, hdmi, video ] + - enum: [ media, lclk, hdmi, video ] + - enum: [ media, lclk, hdmi, video ] + - enum: [ media, lclk, hdmi, video ] + + power-domains: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: LCD port (R-Mobile A1 and SH-Mobile AG5) + unevaluatedProperties: false + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: HDMI port (R-Mobile A1 LCDC1 and SH-Mobile AG5) + unevaluatedProperties: false + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: MIPI-DSI port (SH-Mobile AG5) + unevaluatedProperties: false + + required: + - port@0 + + unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - power-domains + - ports + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + const: renesas,r8a7740-lcdc + then: + properties: + ports: + properties: + port@2: false + + - if: + properties: + compatible: + contains: + const: renesas,sh73a0-lcdc + then: + properties: + ports: + required: + - port@1 + - port@2 + +examples: + - | + #include <dt-bindings/clock/r8a7740-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + lcd-controller@fe940000 { + compatible = "renesas,r8a7740-lcdc"; + reg = <0xfe940000 0x4000>; + interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp1_clks R8A7740_CLK_LCDC0>, + <&cpg_clocks R8A7740_CLK_M3>, <&lcdlclk0_clk>, + <&vou_clk>; + clock-names = "fck", "media", "lclk", "video"; + power-domains = <&pd_a4lc>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lcdc0_rgb: endpoint { + }; + }; + }; + }; diff --git a/dts/Bindings/display/rockchip/analogix_dp-rockchip.txt b/dts/Bindings/display/rockchip/analogix_dp-rockchip.txt deleted file mode 100644 index 43561584c1..0000000000 --- a/dts/Bindings/display/rockchip/analogix_dp-rockchip.txt +++ /dev/null @@ -1,98 +0,0 @@ -Rockchip RK3288 specific extensions to the Analogix Display Port -================================ - -Required properties: -- compatible: "rockchip,rk3288-dp", - "rockchip,rk3399-edp"; - -- reg: physical base address of the controller and length - -- clocks: from common clock binding: handle to dp clock. - of memory mapped region. - -- clock-names: from common clock binding: - Required elements: "dp" "pclk" - -- resets: Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. - -- pinctrl-names: Names corresponding to the chip hotplug pinctrl states. -- pinctrl-0: pin-control mode. should be <&edp_hpd> - -- reset-names: Must include the name "dp" - -- rockchip,grf: this soc should set GRF regs, so need get grf here. - -- ports: there are 2 port nodes with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. - Port 0: contained 2 endpoints, connecting to the output of vop. - Port 1: contained 1 endpoint, connecting to the input of panel. - -Optional property for different chips: -- clocks: from common clock binding: handle to grf_vio clock. - -- clock-names: from common clock binding: - Required elements: "grf" - -For the below properties, please refer to Analogix DP binding document: - * Documentation/devicetree/bindings/display/bridge/analogix_dp.txt -- phys (required) -- phy-names (required) -- hpd-gpios (optional) -- force-hpd (optional) -------------------------------------------------------------------------------- - -Example: - dp-controller: dp@ff970000 { - compatible = "rockchip,rk3288-dp"; - reg = <0xff970000 0x4000>; - interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru SCLK_EDP>, <&cru PCLK_EDP_CTRL>; - clock-names = "dp", "pclk"; - phys = <&dp_phy>; - phy-names = "dp"; - - rockchip,grf = <&grf>; - resets = <&cru 111>; - reset-names = "dp"; - - pinctrl-names = "default"; - pinctrl-0 = <&edp_hpd>; - - - ports { - #address-cells = <1>; - #size-cells = <0>; - edp_in: port@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - edp_in_vopb: endpoint@0 { - reg = <0>; - remote-endpoint = <&vopb_out_edp>; - }; - edp_in_vopl: endpoint@1 { - reg = <1>; - remote-endpoint = <&vopl_out_edp>; - }; - }; - - edp_out: port@1 { - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - edp_out_panel: endpoint { - reg = <0>; - remote-endpoint = <&panel_in_edp> - }; - }; - }; - }; - - pinctrl { - edp { - edp_hpd: edp-hpd { - rockchip,pins = <7 11 RK_FUNC_2 &pcfg_pull_none>; - }; - }; - }; diff --git a/dts/Bindings/display/rockchip/dw_hdmi-rockchip.txt b/dts/Bindings/display/rockchip/dw_hdmi-rockchip.txt deleted file mode 100644 index 3d32ce137e..0000000000 --- a/dts/Bindings/display/rockchip/dw_hdmi-rockchip.txt +++ /dev/null @@ -1,74 +0,0 @@ -Rockchip DWC HDMI TX Encoder -============================ - -The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP -with a companion PHY IP. - -These DT bindings follow the Synopsys DWC HDMI TX bindings defined in -Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt with the -following device-specific properties. - - -Required properties: - -- compatible: should be one of the following: - "rockchip,rk3228-dw-hdmi" - "rockchip,rk3288-dw-hdmi" - "rockchip,rk3328-dw-hdmi" - "rockchip,rk3399-dw-hdmi" -- reg: See dw_hdmi.txt. -- reg-io-width: See dw_hdmi.txt. Shall be 4. -- interrupts: HDMI interrupt number -- clocks: See dw_hdmi.txt. -- clock-names: Shall contain "iahb" and "isfr" as defined in dw_hdmi.txt. -- ports: See dw_hdmi.txt. The DWC HDMI shall have a single port numbered 0 - corresponding to the video input of the controller. The port shall have two - endpoints, numbered 0 and 1, connected respectively to the vopb and vopl. -- rockchip,grf: Shall reference the GRF to mux vopl/vopb. - -Optional properties - -- ddc-i2c-bus: The HDMI DDC bus can be connected to either a system I2C master - or the functionally-reduced I2C master contained in the DWC HDMI. When - connected to a system I2C master this property contains a phandle to that - I2C master controller. -- clock-names: See dw_hdmi.txt. The "cec" clock is optional. -- clock-names: May contain "cec" as defined in dw_hdmi.txt. -- clock-names: May contain "grf", power for grf io. -- clock-names: May contain "vpll", external clock for some hdmi phy. -- phys: from general PHY binding: the phandle for the PHY device. -- phy-names: Should be "hdmi" if phys references an external phy. - -Optional pinctrl entry: -- If you have both a "unwedge" and "default" pinctrl entry, dw_hdmi - will switch to the unwedge pinctrl state for 10ms if it ever gets an - i2c timeout. It's intended that this unwedge pinctrl entry will - cause the SDA line to be driven low to work around a hardware - errata. - -Example: - -hdmi: hdmi@ff980000 { - compatible = "rockchip,rk3288-dw-hdmi"; - reg = <0xff980000 0x20000>; - reg-io-width = <4>; - ddc-i2c-bus = <&i2c5>; - rockchip,grf = <&grf>; - interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>; - clock-names = "iahb", "isfr"; - ports { - hdmi_in: port { - #address-cells = <1>; - #size-cells = <0>; - hdmi_in_vopb: endpoint@0 { - reg = <0>; - remote-endpoint = <&vopb_out_hdmi>; - }; - hdmi_in_vopl: endpoint@1 { - reg = <1>; - remote-endpoint = <&vopl_out_hdmi>; - }; - }; - }; -}; diff --git a/dts/Bindings/display/rockchip/dw_mipi_dsi_rockchip.txt b/dts/Bindings/display/rockchip/dw_mipi_dsi_rockchip.txt deleted file mode 100644 index 151be3bba0..0000000000 --- a/dts/Bindings/display/rockchip/dw_mipi_dsi_rockchip.txt +++ /dev/null @@ -1,92 +0,0 @@ -Rockchip specific extensions to the Synopsys Designware MIPI DSI -================================ - -Required properties: -- #address-cells: Should be <1>. -- #size-cells: Should be <0>. -- compatible: one of - "rockchip,px30-mipi-dsi", "snps,dw-mipi-dsi" - "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi" - "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi" -- reg: Represent the physical address range of the controller. -- interrupts: Represent the controller's interrupt to the CPU(s). -- clocks, clock-names: Phandles to the controller's pll reference - clock(ref) when using an internal dphy and APB clock(pclk). - For RK3399, a phy config clock (phy_cfg) and a grf clock(grf) - are required. As described in [1]. -- rockchip,grf: this soc should set GRF regs to mux vopl/vopb. -- ports: contain a port node with endpoint definitions as defined in [2]. - For vopb,set the reg = <0> and set the reg = <1> for vopl. -- video port 0 for the VOP input, the remote endpoint maybe vopb or vopl -- video port 1 for either a panel or subsequent encoder - -Optional properties: -- phys: from general PHY binding: the phandle for the PHY device. -- phy-names: Should be "dphy" if phys references an external phy. -- power-domains: a phandle to mipi dsi power domain node. -- resets: list of phandle + reset specifier pairs, as described in [3]. -- reset-names: string reset name, must be "apb". - -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt -[2] Documentation/devicetree/bindings/media/video-interfaces.txt -[3] Documentation/devicetree/bindings/reset/reset.txt - -Example: - mipi_dsi: mipi@ff960000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi"; - reg = <0xff960000 0x4000>; - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru SCLK_MIPI_24M>, <&cru PCLK_MIPI_DSI0>; - clock-names = "ref", "pclk"; - resets = <&cru SRST_MIPIDSI0>; - reset-names = "apb"; - rockchip,grf = <&grf>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - mipi_in: port@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - - mipi_in_vopb: endpoint@0 { - reg = <0>; - remote-endpoint = <&vopb_out_mipi>; - }; - mipi_in_vopl: endpoint@1 { - reg = <1>; - remote-endpoint = <&vopl_out_mipi>; - }; - }; - - mipi_out: port@1 { - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - - mipi_out_panel: endpoint { - remote-endpoint = <&panel_in_mipi>; - }; - }; - }; - - panel { - compatible ="boe,tv080wum-nl0"; - reg = <0>; - - enable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&lcd_en>; - backlight = <&backlight>; - - port { - panel_in_mipi: endpoint { - remote-endpoint = <&mipi_out_panel>; - }; - }; - }; - }; diff --git a/dts/Bindings/display/rockchip/inno_hdmi-rockchip.txt b/dts/Bindings/display/rockchip/inno_hdmi-rockchip.txt deleted file mode 100644 index cec21714f0..0000000000 --- a/dts/Bindings/display/rockchip/inno_hdmi-rockchip.txt +++ /dev/null @@ -1,49 +0,0 @@ -Rockchip specific extensions to the Innosilicon HDMI -================================ - -Required properties: -- compatible: - "rockchip,rk3036-inno-hdmi"; -- reg: - Physical base address and length of the controller's registers. -- clocks, clock-names: - Phandle to hdmi controller clock, name should be "pclk" -- interrupts: - HDMI interrupt number -- ports: - Contain one port node with endpoint definitions as defined in - Documentation/devicetree/bindings/graph.txt. -- pinctrl-0, pinctrl-name: - Switch the iomux of HPD/CEC pins to HDMI function. - -Example: -hdmi: hdmi@20034000 { - compatible = "rockchip,rk3036-inno-hdmi"; - reg = <0x20034000 0x4000>; - interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru PCLK_HDMI>; - clock-names = "pclk"; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_ctl>; - - hdmi_in: port { - #address-cells = <1>; - #size-cells = <0>; - hdmi_in_lcdc: endpoint@0 { - reg = <0>; - remote-endpoint = <&lcdc_out_hdmi>; - }; - }; -}; - -&pinctrl { - hdmi { - hdmi_ctl: hdmi-ctl { - rockchip,pins = <1 8 RK_FUNC_1 &pcfg_pull_none>, - <1 9 RK_FUNC_1 &pcfg_pull_none>, - <1 10 RK_FUNC_1 &pcfg_pull_none>, - <1 11 RK_FUNC_1 &pcfg_pull_none>; - }; - }; - -}; diff --git a/dts/Bindings/display/rockchip/rockchip,analogix-dp.yaml b/dts/Bindings/display/rockchip/rockchip,analogix-dp.yaml new file mode 100644 index 0000000000..60dedf9b2b --- /dev/null +++ b/dts/Bindings/display/rockchip/rockchip,analogix-dp.yaml @@ -0,0 +1,103 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/rockchip/rockchip,analogix-dp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip specific extensions to the Analogix Display Port + +maintainers: + - Sandy Huang <hjc@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +properties: + compatible: + enum: + - rockchip,rk3288-dp + - rockchip,rk3399-edp + + clocks: + minItems: 2 + maxItems: 3 + + clock-names: + minItems: 2 + items: + - const: dp + - const: pclk + - const: grf + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + reset-names: + const: dp + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + This SoC makes use of GRF regs. + +required: + - compatible + - clocks + - clock-names + - resets + - reset-names + - rockchip,grf + +allOf: + - $ref: /schemas/display/bridge/analogix,dp.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/rk3288-cru.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + dp@ff970000 { + compatible = "rockchip,rk3288-dp"; + reg = <0xff970000 0x4000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_EDP>, <&cru PCLK_EDP_CTRL>; + clock-names = "dp", "pclk"; + phys = <&dp_phy>; + phy-names = "dp"; + resets = <&cru 111>; + reset-names = "dp"; + rockchip,grf = <&grf>; + pinctrl-0 = <&edp_hpd>; + pinctrl-names = "default"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + edp_in: port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + edp_in_vopb: endpoint@0 { + reg = <0>; + remote-endpoint = <&vopb_out_edp>; + }; + edp_in_vopl: endpoint@1 { + reg = <1>; + remote-endpoint = <&vopl_out_edp>; + }; + }; + + edp_out: port@1 { + reg = <1>; + + edp_out_panel: endpoint { + remote-endpoint = <&panel_in_edp>; + }; + }; + }; + }; diff --git a/dts/Bindings/display/rockchip/rockchip,dw-hdmi.yaml b/dts/Bindings/display/rockchip/rockchip,dw-hdmi.yaml new file mode 100644 index 0000000000..7e59dee15a --- /dev/null +++ b/dts/Bindings/display/rockchip/rockchip,dw-hdmi.yaml @@ -0,0 +1,166 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/rockchip/rockchip,dw-hdmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip DWC HDMI TX Encoder + +maintainers: + - Mark Yao <markyao0591@gmail.com> + +description: | + The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP + with a companion PHY IP. + +allOf: + - $ref: ../bridge/synopsys,dw-hdmi.yaml# + +properties: + compatible: + enum: + - rockchip,rk3228-dw-hdmi + - rockchip,rk3288-dw-hdmi + - rockchip,rk3328-dw-hdmi + - rockchip,rk3399-dw-hdmi + - rockchip,rk3568-dw-hdmi + + reg-io-width: + const: 4 + + avdd-0v9-supply: + description: + A 0.9V supply that powers up the SoC internal circuitry. The actual pin name + varies between the different SoCs and is usually HDMI_TX_AVDD_0V9 or sometimes + HDMI_AVDD_1V0. + + avdd-1v8-supply: + description: + A 1.8V supply that powers up the SoC internal circuitry. The pin name on the + SoC usually is HDMI_TX_AVDD_1V8. + + clocks: + minItems: 2 + items: + - {} + - {} + # The next three clocks are all optional, but shall be specified in this + # order when present. + - description: The HDMI CEC controller main clock + - description: Power for GRF IO + - description: External clock for some HDMI PHY (old clock name, deprecated) + - description: External clock for some HDMI PHY (new name) + + clock-names: + minItems: 2 + items: + - {} + - {} + - enum: + - cec + - grf + - vpll + - ref + - enum: + - grf + - vpll + - ref + - enum: + - vpll + - ref + + ddc-i2c-bus: + $ref: /schemas/types.yaml#/definitions/phandle + description: + The HDMI DDC bus can be connected to either a system I2C master or the + functionally-reduced I2C master contained in the DWC HDMI. When connected + to a system I2C master this property contains a phandle to that I2C + master controller. + + phys: + maxItems: 1 + description: The HDMI PHY + + phy-names: + const: hdmi + + pinctrl-names: + description: + The unwedge pinctrl entry shall drive the DDC SDA line low. This is + intended to work around a hardware errata that can cause the DDC I2C + bus to be wedged. + minItems: 1 + items: + - const: default + - const: unwedge + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + patternProperties: + "^port(@0)?$": + $ref: /schemas/graph.yaml#/properties/port + description: Input of the DWC HDMI TX + properties: + endpoint: + description: Connection to the VOP + endpoint@0: + description: Connection to the VOPB + endpoint@1: + description: Connection to the VOPL + properties: + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Output of the DWC HDMI TX + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to the GRF to mux vopl/vopb. + +required: + - compatible + - reg + - reg-io-width + - clocks + - clock-names + - interrupts + - ports + - rockchip,grf + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/rk3288-cru.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + hdmi: hdmi@ff980000 { + compatible = "rockchip,rk3288-dw-hdmi"; + reg = <0xff980000 0x20000>; + reg-io-width = <4>; + ddc-i2c-bus = <&i2c5>; + rockchip,grf = <&grf>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>; + clock-names = "iahb", "isfr"; + + ports { + port { + #address-cells = <1>; + #size-cells = <0>; + + hdmi_in_vopb: endpoint@0 { + reg = <0>; + remote-endpoint = <&vopb_out_hdmi>; + }; + hdmi_in_vopl: endpoint@1 { + reg = <1>; + remote-endpoint = <&vopl_out_hdmi>; + }; + }; + }; + }; + +... diff --git a/dts/Bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml b/dts/Bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml new file mode 100644 index 0000000000..ccf79e738f --- /dev/null +++ b/dts/Bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml @@ -0,0 +1,168 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/rockchip/rockchip,dw-mipi-dsi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip specific extensions to the Synopsys Designware MIPI DSI + +maintainers: + - Sandy Huang <hjc@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +properties: + compatible: + items: + - enum: + - rockchip,px30-mipi-dsi + - rockchip,rk3288-mipi-dsi + - rockchip,rk3399-mipi-dsi + - rockchip,rk3568-mipi-dsi + - rockchip,rv1126-mipi-dsi + - const: snps,dw-mipi-dsi + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 4 + + clock-names: + oneOf: + - minItems: 2 + items: + - const: ref + - const: pclk + - const: phy_cfg + - const: grf + - const: pclk + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + This SoC uses GRF regs to switch between vopl/vopb. + + phys: + maxItems: 1 + + phy-names: + const: dphy + + "#phy-cells": + const: 0 + description: + Defined when in use as ISP phy. + + power-domains: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +required: + - compatible + - clocks + - clock-names + - rockchip,grf + +allOf: + - $ref: /schemas/display/bridge/snps,dw-mipi-dsi.yaml# + - if: + properties: + compatible: + contains: + enum: + - rockchip,px30-mipi-dsi + - rockchip,rk3568-mipi-dsi + - rockchip,rv1126-mipi-dsi + + then: + properties: + clocks: + maxItems: 1 + + clock-names: + maxItems: 1 + + required: + - phys + - phy-names + + - if: + properties: + compatible: + contains: + const: rockchip,rk3288-mipi-dsi + + then: + properties: + clocks: + maxItems: 2 + + clock-names: + maxItems: 2 + + - if: + properties: + compatible: + contains: + const: rockchip,rk3399-mipi-dsi + + then: + properties: + clocks: + minItems: 4 + + clock-names: + minItems: 4 + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/rk3288-cru.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + mipi_dsi: dsi@ff960000 { + compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi"; + reg = <0xff960000 0x4000>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_MIPIDSI_24M>, <&cru PCLK_MIPI_DSI0>; + clock-names = "ref", "pclk"; + resets = <&cru SRST_MIPIDSI0>; + reset-names = "apb"; + rockchip,grf = <&grf>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + mipi_in: port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + mipi_in_vopb: endpoint@0 { + reg = <0>; + remote-endpoint = <&vopb_out_mipi>; + }; + mipi_in_vopl: endpoint@1 { + reg = <1>; + remote-endpoint = <&vopl_out_mipi>; + }; + }; + + mipi_out: port@1 { + reg = <1>; + + mipi_out_panel: endpoint { + remote-endpoint = <&panel_in_mipi>; + }; + }; + }; + }; diff --git a/dts/Bindings/display/rockchip/rockchip,inno-hdmi.yaml b/dts/Bindings/display/rockchip/rockchip,inno-hdmi.yaml new file mode 100644 index 0000000000..be78dcfa1c --- /dev/null +++ b/dts/Bindings/display/rockchip/rockchip,inno-hdmi.yaml @@ -0,0 +1,139 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/rockchip/rockchip,inno-hdmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip Innosilicon HDMI controller + +maintainers: + - Sandy Huang <hjc@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +properties: + compatible: + enum: + - rockchip,rk3036-inno-hdmi + - rockchip,rk3128-inno-hdmi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + items: + - description: The HDMI controller main clock + - description: The HDMI PHY reference clock + + clock-names: + minItems: 1 + items: + - const: pclk + - const: ref + + power-domains: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Port node with one endpoint connected to a vop node. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Port node with one endpoint connected to a hdmi-connector node. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - pinctrl-0 + - pinctrl-names + - ports + +allOf: + - if: + properties: + compatible: + contains: + const: rockchip,rk3036-inno-hdmi + + then: + properties: + power-domains: false + + - if: + properties: + compatible: + contains: + const: rockchip,rk3128-inno-hdmi + + then: + properties: + clocks: + minItems: 2 + clock-names: + minItems: 2 + required: + - power-domains + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/rk3036-cru.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/pinctrl/rockchip.h> + hdmi: hdmi@20034000 { + compatible = "rockchip,rk3036-inno-hdmi"; + reg = <0x20034000 0x4000>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_HDMI>; + clock-names = "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_ctl>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + hdmi_in: port@0 { + reg = <0>; + hdmi_in_vop: endpoint { + remote-endpoint = <&vop_out_hdmi>; + }; + }; + + hdmi_out: port@1 { + reg = <1>; + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; + }; + }; + }; + + pinctrl { + hdmi { + hdmi_ctl: hdmi-ctl { + rockchip,pins = <1 RK_PB0 1 &pcfg_pull_none>, + <1 RK_PB1 1 &pcfg_pull_none>, + <1 RK_PB2 1 &pcfg_pull_none>, + <1 RK_PB3 1 &pcfg_pull_none>; + }; + }; + }; diff --git a/dts/Bindings/display/rockchip/rockchip,lvds.yaml b/dts/Bindings/display/rockchip/rockchip,lvds.yaml new file mode 100644 index 0000000000..03b002a05c --- /dev/null +++ b/dts/Bindings/display/rockchip/rockchip,lvds.yaml @@ -0,0 +1,170 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/rockchip/rockchip,lvds.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip low-voltage differential signal (LVDS) transmitter + +maintainers: + - Sandy Huang <hjc@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +properties: + compatible: + enum: + - rockchip,px30-lvds + - rockchip,rk3288-lvds + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: pclk_lvds + + avdd1v0-supply: + description: 1.0V analog power. + + avdd1v8-supply: + description: 1.8V analog power. + + avdd3v3-supply: + description: 3.3V analog power. + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: Phandle to the general register files syscon. + + rockchip,output: + $ref: /schemas/types.yaml#/definitions/string + enum: [rgb, lvds, duallvds] + description: This describes the output interface. + + phys: + maxItems: 1 + + phy-names: + const: dphy + + pinctrl-names: + const: lcdc + + pinctrl-0: true + + power-domains: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Video port 0 for the VOP input. + The remote endpoint maybe vopb or vopl. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Video port 1 for either a panel or subsequent encoder. + + required: + - port@0 + - port@1 + +required: + - compatible + - rockchip,grf + - rockchip,output + - ports + +allOf: + - if: + properties: + compatible: + contains: + const: rockchip,px30-lvds + + then: + properties: + reg: false + clocks: false + clock-names: false + avdd1v0-supply: false + avdd1v8-supply: false + avdd3v3-supply: false + + required: + - phys + - phy-names + + - if: + properties: + compatible: + contains: + const: rockchip,rk3288-lvds + + then: + properties: + phys: false + phy-names: false + + required: + - reg + - clocks + - clock-names + - avdd1v0-supply + - avdd1v8-supply + - avdd3v3-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/rk3288-cru.h> + + lvds: lvds@ff96c000 { + compatible = "rockchip,rk3288-lvds"; + reg = <0xff96c000 0x4000>; + clocks = <&cru PCLK_LVDS_PHY>; + clock-names = "pclk_lvds"; + avdd1v0-supply = <&vdd10_lcd>; + avdd1v8-supply = <&vcc18_lcd>; + avdd3v3-supply = <&vcca_33>; + pinctrl-names = "lcdc"; + pinctrl-0 = <&lcdc_ctl>; + rockchip,grf = <&grf>; + rockchip,output = "rgb"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + lvds_in: port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + lvds_in_vopb: endpoint@0 { + reg = <0>; + remote-endpoint = <&vopb_out_lvds>; + }; + lvds_in_vopl: endpoint@1 { + reg = <1>; + remote-endpoint = <&vopl_out_lvds>; + }; + }; + + lvds_out: port@1 { + reg = <1>; + + lvds_out_panel: endpoint { + remote-endpoint = <&panel_in_lvds>; + }; + }; + }; + }; diff --git a/dts/Bindings/display/rockchip/rockchip,rk3066-hdmi.txt b/dts/Bindings/display/rockchip/rockchip,rk3066-hdmi.txt deleted file mode 100644 index d1ad31bca8..0000000000 --- a/dts/Bindings/display/rockchip/rockchip,rk3066-hdmi.txt +++ /dev/null @@ -1,72 +0,0 @@ -Rockchip specific extensions for rk3066 HDMI -============================================ - -Required properties: -- compatible: - "rockchip,rk3066-hdmi"; -- reg: - Physical base address and length of the controller's registers. -- clocks, clock-names: - Phandle to HDMI controller clock, name should be "hclk". -- interrupts: - HDMI interrupt number. -- power-domains: - Phandle to the RK3066_PD_VIO power domain. -- rockchip,grf: - This soc uses GRF regs to switch the HDMI TX input between vop0 and vop1. -- ports: - Contains one port node with two endpoints, numbered 0 and 1, - connected respectively to vop0 and vop1. - Contains one port node with one endpoint - connected to a hdmi-connector node. -- pinctrl-0, pinctrl-name: - Switch the iomux for the HPD/I2C pins to HDMI function. - -Example: - hdmi: hdmi@10116000 { - compatible = "rockchip,rk3066-hdmi"; - reg = <0x10116000 0x2000>; - interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru HCLK_HDMI>; - clock-names = "hclk"; - power-domains = <&power RK3066_PD_VIO>; - rockchip,grf = <&grf>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmii2c_xfer>, <&hdmi_hpd>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - hdmi_in: port@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - hdmi_in_vop0: endpoint@0 { - reg = <0>; - remote-endpoint = <&vop0_out_hdmi>; - }; - hdmi_in_vop1: endpoint@1 { - reg = <1>; - remote-endpoint = <&vop1_out_hdmi>; - }; - }; - hdmi_out: port@1 { - reg = <1>; - hdmi_out_con: endpoint { - remote-endpoint = <&hdmi_con_in>; - }; - }; - }; - }; - -&pinctrl { - hdmi { - hdmi_hpd: hdmi-hpd { - rockchip,pins = <0 RK_PA0 1 &pcfg_pull_default>; - }; - hdmii2c_xfer: hdmii2c-xfer { - rockchip,pins = <0 RK_PA1 1 &pcfg_pull_none>, - <0 RK_PA2 1 &pcfg_pull_none>; - }; - }; -}; diff --git a/dts/Bindings/display/rockchip/rockchip,rk3066-hdmi.yaml b/dts/Bindings/display/rockchip/rockchip,rk3066-hdmi.yaml new file mode 100644 index 0000000000..1a68a940d1 --- /dev/null +++ b/dts/Bindings/display/rockchip/rockchip,rk3066-hdmi.yaml @@ -0,0 +1,122 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/rockchip/rockchip,rk3066-hdmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip rk3066 HDMI controller + +maintainers: + - Sandy Huang <hjc@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +properties: + compatible: + const: rockchip,rk3066-hdmi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: hclk + + power-domains: + maxItems: 1 + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + This soc uses GRF regs to switch the HDMI TX input between vop0 and vop1. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Port node with two endpoints, numbered 0 and 1, + connected respectively to vop0 and vop1. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Port node with one endpoint connected to a hdmi-connector node. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - pinctrl-0 + - pinctrl-names + - power-domains + - rockchip,grf + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/rk3066a-cru.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/pinctrl/rockchip.h> + #include <dt-bindings/power/rk3066-power.h> + hdmi: hdmi@10116000 { + compatible = "rockchip,rk3066-hdmi"; + reg = <0x10116000 0x2000>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_HDMI>; + clock-names = "hclk"; + pinctrl-0 = <&hdmii2c_xfer>, <&hdmi_hpd>; + pinctrl-names = "default"; + power-domains = <&power RK3066_PD_VIO>; + rockchip,grf = <&grf>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + hdmi_in: port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + hdmi_in_vop0: endpoint@0 { + reg = <0>; + remote-endpoint = <&vop0_out_hdmi>; + }; + hdmi_in_vop1: endpoint@1 { + reg = <1>; + remote-endpoint = <&vop1_out_hdmi>; + }; + }; + hdmi_out: port@1 { + reg = <1>; + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; + }; + }; + }; + + pinctrl { + hdmi { + hdmi_hpd: hdmi-hpd { + rockchip,pins = <0 RK_PA0 1 &pcfg_pull_default>; + }; + hdmii2c_xfer: hdmii2c-xfer { + rockchip,pins = <0 RK_PA1 1 &pcfg_pull_none>, + <0 RK_PA2 1 &pcfg_pull_none>; + }; + }; + }; diff --git a/dts/Bindings/display/rockchip/rockchip-drm.yaml b/dts/Bindings/display/rockchip/rockchip-drm.yaml index ec8ae742d4..a8d18a37cb 100644 --- a/dts/Bindings/display/rockchip/rockchip-drm.yaml +++ b/dts/Bindings/display/rockchip/rockchip-drm.yaml @@ -21,10 +21,12 @@ properties: ports: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 description: | Should contain a list of phandles pointing to display interface port of vop devices. vop definitions as defined in - Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt + Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml required: - compatible diff --git a/dts/Bindings/display/rockchip/rockchip-lvds.txt b/dts/Bindings/display/rockchip/rockchip-lvds.txt deleted file mode 100644 index aaf8c44cf9..0000000000 --- a/dts/Bindings/display/rockchip/rockchip-lvds.txt +++ /dev/null @@ -1,92 +0,0 @@ -Rockchip RK3288 LVDS interface -================================ - -Required properties: -- compatible: matching the soc type, one of - - "rockchip,rk3288-lvds"; - - "rockchip,px30-lvds"; - -- reg: physical base address of the controller and length - of memory mapped region. -- clocks: must include clock specifiers corresponding to entries in the - clock-names property. -- clock-names: must contain "pclk_lvds" - -- avdd1v0-supply: regulator phandle for 1.0V analog power -- avdd1v8-supply: regulator phandle for 1.8V analog power -- avdd3v3-supply: regulator phandle for 3.3V analog power - -- rockchip,grf: phandle to the general register files syscon -- rockchip,output: "rgb", "lvds" or "duallvds", This describes the output interface - -- phys: LVDS/DSI DPHY (px30 only) -- phy-names: name of the PHY, must be "dphy" (px30 only) - -Optional properties: -- pinctrl-names: must contain a "lcdc" entry. -- pinctrl-0: pin control group to be used for this controller. - -Required nodes: - -The lvds has two video ports as described by - Documentation/devicetree/bindings/media/video-interfaces.txt -Their connections are modeled using the OF graph bindings specified in - Documentation/devicetree/bindings/graph.txt. - -- video port 0 for the VOP input, the remote endpoint maybe vopb or vopl -- video port 1 for either a panel or subsequent encoder - -Example: - -lvds_panel: lvds-panel { - compatible = "auo,b101ean01"; - enable-gpios = <&gpio7 21 GPIO_ACTIVE_HIGH>; - data-mapping = "jeida-24"; - - ports { - panel_in_lvds: endpoint { - remote-endpoint = <&lvds_out_panel>; - }; - }; -}; - -For Rockchip RK3288: - - lvds: lvds@ff96c000 { - compatible = "rockchip,rk3288-lvds"; - rockchip,grf = <&grf>; - reg = <0xff96c000 0x4000>; - clocks = <&cru PCLK_LVDS_PHY>; - clock-names = "pclk_lvds"; - pinctrl-names = "lcdc"; - pinctrl-0 = <&lcdc_ctl>; - avdd1v0-supply = <&vdd10_lcd>; - avdd1v8-supply = <&vcc18_lcd>; - avdd3v3-supply = <&vcca_33>; - rockchip,output = "rgb"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - lvds_in: port@0 { - reg = <0>; - - lvds_in_vopb: endpoint@0 { - reg = <0>; - remote-endpoint = <&vopb_out_lvds>; - }; - lvds_in_vopl: endpoint@1 { - reg = <1>; - remote-endpoint = <&vopl_out_lvds>; - }; - }; - - lvds_out: port@1 { - reg = <1>; - - lvds_out_panel: endpoint { - remote-endpoint = <&panel_in_lvds>; - }; - }; - }; - }; diff --git a/dts/Bindings/display/rockchip/rockchip-vop.txt b/dts/Bindings/display/rockchip/rockchip-vop.txt deleted file mode 100644 index 8b3a5f5142..0000000000 --- a/dts/Bindings/display/rockchip/rockchip-vop.txt +++ /dev/null @@ -1,74 +0,0 @@ -device-tree bindings for rockchip soc display controller (vop) - -VOP (Visual Output Processor) is the Display Controller for the Rockchip -series of SoCs which transfers the image data from a video memory -buffer to an external LCD interface. - -Required properties: -- compatible: value should be one of the following - "rockchip,rk3036-vop"; - "rockchip,rk3126-vop"; - "rockchip,px30-vop-lit"; - "rockchip,px30-vop-big"; - "rockchip,rk3066-vop"; - "rockchip,rk3188-vop"; - "rockchip,rk3288-vop"; - "rockchip,rk3368-vop"; - "rockchip,rk3366-vop"; - "rockchip,rk3399-vop-big"; - "rockchip,rk3399-vop-lit"; - "rockchip,rk3228-vop"; - "rockchip,rk3328-vop"; - -- reg: Must contain one entry corresponding to the base address and length - of the register space. Can optionally contain a second entry - corresponding to the CRTC gamma LUT address. - -- interrupts: should contain a list of all VOP IP block interrupts in the - order: VSYNC, LCD_SYSTEM. The interrupt specifier - format depends on the interrupt controller used. - -- clocks: must include clock specifiers corresponding to entries in the - clock-names property. - -- clock-names: Must contain - aclk_vop: for ddr buffer transfer. - hclk_vop: for ahb bus to R/W the phy regs. - dclk_vop: pixel clock. - -- resets: Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names: Must include the following entries: - - axi - - ahb - - dclk - -- iommus: required a iommu node - -- port: A port node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. - -Example: -SoC specific DT entry: - vopb: vopb@ff930000 { - compatible = "rockchip,rk3288-vop"; - reg = <0x0 0xff930000 0x0 0x19c>, <0x0 0xff931000 0x0 0x1000>; - interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>; - clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; - resets = <&cru SRST_LCDC1_AXI>, <&cru SRST_LCDC1_AHB>, <&cru SRST_LCDC1_DCLK>; - reset-names = "axi", "ahb", "dclk"; - iommus = <&vopb_mmu>; - vopb_out: port { - #address-cells = <1>; - #size-cells = <0>; - vopb_out_edp: endpoint@0 { - reg = <0>; - remote-endpoint=<&edp_in_vopb>; - }; - vopb_out_hdmi: endpoint@1 { - reg = <1>; - remote-endpoint=<&hdmi_in_vopb>; - }; - }; - }; diff --git a/dts/Bindings/display/rockchip/rockchip-vop.yaml b/dts/Bindings/display/rockchip/rockchip-vop.yaml new file mode 100644 index 0000000000..b339b7e708 --- /dev/null +++ b/dts/Bindings/display/rockchip/rockchip-vop.yaml @@ -0,0 +1,132 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/rockchip/rockchip-vop.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip SoC display controller (VOP) + +description: + VOP (Video Output Processor) is the display controller for the Rockchip + series of SoCs which transfers the image data from a video memory + buffer to an external LCD interface. + +maintainers: + - Sandy Huang <hjc@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +properties: + compatible: + enum: + - rockchip,px30-vop-big + - rockchip,px30-vop-lit + - rockchip,rk3036-vop + - rockchip,rk3066-vop + - rockchip,rk3126-vop + - rockchip,rk3188-vop + - rockchip,rk3228-vop + - rockchip,rk3288-vop + - rockchip,rk3328-vop + - rockchip,rk3366-vop + - rockchip,rk3368-vop + - rockchip,rk3399-vop-big + - rockchip,rk3399-vop-lit + - rockchip,rv1126-vop + + reg: + minItems: 1 + items: + - description: + Must contain one entry corresponding to the base address and length + of the register space. + - description: + Can optionally contain a second entry corresponding to + the CRTC gamma LUT address. + + interrupts: + maxItems: 1 + description: + The VOP interrupt is shared by several interrupt sources, such as + frame start (VSYNC), line flag and other status interrupts. + + clocks: + items: + - description: Clock for ddr buffer transfer. + - description: Pixel clock. + - description: Clock for the ahb bus to R/W the phy regs. + + clock-names: + items: + - const: aclk_vop + - const: dclk_vop + - const: hclk_vop + + resets: + maxItems: 3 + + reset-names: + items: + - const: axi + - const: ahb + - const: dclk + + port: + $ref: /schemas/graph.yaml#/properties/port + + assigned-clocks: + maxItems: 2 + + assigned-clock-rates: + maxItems: 2 + + iommus: + maxItems: 1 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - reset-names + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/rk3288-cru.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/rk3288-power.h> + vopb: vopb@ff930000 { + compatible = "rockchip,rk3288-vop"; + reg = <0xff930000 0x19c>, + <0xff931000 0x1000>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_VOP0>, + <&cru DCLK_VOP0>, + <&cru HCLK_VOP0>; + clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; + power-domains = <&power RK3288_PD_VIO>; + resets = <&cru SRST_LCDC1_AXI>, + <&cru SRST_LCDC1_AHB>, + <&cru SRST_LCDC1_DCLK>; + reset-names = "axi", "ahb", "dclk"; + iommus = <&vopb_mmu>; + vopb_out: port { + #address-cells = <1>; + #size-cells = <0>; + vopb_out_edp: endpoint@0 { + reg = <0>; + remote-endpoint = <&edp_in_vopb>; + }; + vopb_out_hdmi: endpoint@1 { + reg = <1>; + remote-endpoint = <&hdmi_in_vopb>; + }; + }; + }; diff --git a/dts/Bindings/display/rockchip/rockchip-vop2.yaml b/dts/Bindings/display/rockchip/rockchip-vop2.yaml new file mode 100644 index 0000000000..2531726af3 --- /dev/null +++ b/dts/Bindings/display/rockchip/rockchip-vop2.yaml @@ -0,0 +1,208 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/rockchip/rockchip-vop2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip SoC display controller (VOP2) + +description: + VOP2 (Video Output Processor v2) is the display controller for the Rockchip + series of SoCs which transfers the image data from a video memory buffer to + an external LCD interface. + +maintainers: + - Sandy Huang <hjc@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +properties: + compatible: + enum: + - rockchip,rk3566-vop + - rockchip,rk3568-vop + - rockchip,rk3588-vop + + reg: + items: + - description: + Must contain one entry corresponding to the base address and length + of the register space. + - description: + Can optionally contain a second entry corresponding to the CRTC gamma + LUT address. + + reg-names: + items: + - const: vop + - const: gamma-lut + + interrupts: + maxItems: 1 + description: + The VOP interrupt is shared by several interrupt sources, such as + frame start (VSYNC), line flag and other status interrupts. + + # See compatible-specific constraints below. + clocks: + minItems: 5 + items: + - description: Clock for ddr buffer transfer via axi. + - description: Clock for the ahb bus to R/W the regs. + - description: Pixel clock for video port 0. + - description: Pixel clock for video port 1. + - description: Pixel clock for video port 2. + - description: Pixel clock for video port 3. + - description: Peripheral(vop grf/dsi) clock. + + clock-names: + minItems: 5 + items: + - const: aclk + - const: hclk + - const: dclk_vp0 + - const: dclk_vp1 + - const: dclk_vp2 + - const: dclk_vp3 + - const: pclk_vop + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to GRF regs used for control the polarity of dclk/hsync/vsync of DPI, + also used for query vop memory bisr enable status, etc. + + rockchip,vo1-grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to VO GRF regs used for control the polarity of dclk/hsync/vsync of hdmi + on rk3588. + + rockchip,vop-grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to VOP GRF regs used for control data path between vopr and hdmi/edp. + + rockchip,pmu: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to PMU GRF used for query vop memory bisr status on rk3588. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + patternProperties: + "^port@[0-3]$": + $ref: /schemas/graph.yaml#/properties/port + description: Output endpoint of VP0/1/2/3. + + required: + - port@0 + + unevaluatedProperties: false + + iommus: + maxItems: 1 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - reg-names + - interrupts + - clocks + - clock-names + - ports + +allOf: + - if: + properties: + compatible: + contains: + const: rockchip,rk3588-vop + then: + properties: + clocks: + minItems: 7 + clock-names: + minItems: 7 + + ports: + required: + - port@0 + - port@1 + - port@2 + - port@3 + + required: + - rockchip,grf + - rockchip,vo1-grf + - rockchip,vop-grf + - rockchip,pmu + + else: + properties: + rockchip,vo1-grf: false + rockchip,vop-grf: false + rockchip,pmu: false + + clocks: + maxItems: 5 + clock-names: + maxItems: 5 + + ports: + required: + - port@0 + - port@1 + - port@2 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/rk3568-cru.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/rk3568-power.h> + bus { + #address-cells = <2>; + #size-cells = <2>; + vop: vop@fe040000 { + compatible = "rockchip,rk3568-vop"; + reg = <0x0 0xfe040000 0x0 0x3000>, <0x0 0xfe044000 0x0 0x1000>; + reg-names = "vop", "gamma-lut"; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_VOP>, + <&cru HCLK_VOP>, + <&cru DCLK_VOP0>, + <&cru DCLK_VOP1>, + <&cru DCLK_VOP2>; + clock-names = "aclk", + "hclk", + "dclk_vp0", + "dclk_vp1", + "dclk_vp2"; + power-domains = <&power RK3568_PD_VO>; + iommus = <&vop_mmu>; + vop_out: ports { + #address-cells = <1>; + #size-cells = <0>; + vp0: port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + vp1: port@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + vp2: port@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + }; diff --git a/dts/Bindings/display/samsung/samsung,exynos-hdmi-ddc.yaml b/dts/Bindings/display/samsung/samsung,exynos-hdmi-ddc.yaml new file mode 100644 index 0000000000..458d399cb0 --- /dev/null +++ b/dts/Bindings/display/samsung/samsung,exynos-hdmi-ddc.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/samsung/samsung,exynos-hdmi-ddc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos SoC HDMI DDC + +maintainers: + - Inki Dae <inki.dae@samsung.com> + - Seung-Woo Kim <sw0312.kim@samsung.com> + - Kyungmin Park <kyungmin.park@samsung.com> + - Krzysztof Kozlowski <krzk@kernel.org> + +properties: + compatible: + oneOf: + - const: samsung,exynos4210-hdmiddc + - const: samsung,exynos5-hdmiddc + deprecated: true + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ddc@50 { + compatible = "samsung,exynos4210-hdmiddc"; + reg = <0x50>; + }; + }; diff --git a/dts/Bindings/display/samsung/samsung,exynos-hdmi.yaml b/dts/Bindings/display/samsung/samsung,exynos-hdmi.yaml new file mode 100644 index 0000000000..e4a68c5a1a --- /dev/null +++ b/dts/Bindings/display/samsung/samsung,exynos-hdmi.yaml @@ -0,0 +1,226 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/samsung/samsung,exynos-hdmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos SoC HDMI + +maintainers: + - Inki Dae <inki.dae@samsung.com> + - Seung-Woo Kim <sw0312.kim@samsung.com> + - Kyungmin Park <kyungmin.park@samsung.com> + - Krzysztof Kozlowski <krzk@kernel.org> + +properties: + compatible: + enum: + - samsung,exynos4210-hdmi + - samsung,exynos4212-hdmi + - samsung,exynos5420-hdmi + - samsung,exynos5433-hdmi + + clocks: + minItems: 5 + maxItems: 10 + + clock-names: + minItems: 5 + maxItems: 10 + + ddc: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the HDMI DDC node. + + hdmi-en-supply: + description: + Provides voltage source for DCC lines available on HDMI connector. When + there is no power provided for DDC epprom, some TV-sets do not pulls up + HPD (hot plug detect) line, what causes HDMI block to stay turned off. + When provided, the regulator allows TV-set correctly signal HPD event. + + hpd-gpios: + maxItems: 1 + description: + A GPIO line connected to HPD + + interrupts: + maxItems: 1 + + phy: + $ref: /schemas/types.yaml#/definitions/phandle + description: Phandle to the HDMI PHY node. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: + Contains a port which is connected to mic node. + + power-domains: + maxItems: 1 + + reg: + maxItems: 1 + + samsung,syscon-phandle: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the PMU system controller node. + + samsung,sysreg-phandle: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to DISP system controller interface. + + '#sound-dai-cells': + const: 0 + + vdd-supply: + description: + VDD 1.0V HDMI TX. + + vdd_osc-supply: + description: + VDD 1.8V HDMI OSC. + + vdd_pll-supply: + description: + VDD 1.0V HDMI PLL. + +required: + - compatible + - clocks + - clock-names + - ddc + - hpd-gpios + - interrupts + - phy + - reg + - samsung,syscon-phandle + - '#sound-dai-cells' + - vdd-supply + - vdd_osc-supply + - vdd_pll-supply + +allOf: + - if: + properties: + compatible: + contains: + const: samsung,exynos5433-hdmi + then: + properties: + clocks: + items: + - description: Gate of HDMI IP APB bus. + - description: Gate of HDMI-PHY IP APB bus. + - description: Gate of HDMI TMDS clock. + - description: Gate of HDMI pixel clock. + - description: TMDS clock generated by HDMI-PHY. + - description: MUX used to switch between oscclk and tmds_clko, + respectively if HDMI-PHY is off and operational. + - description: Pixel clock generated by HDMI-PHY. + - description: MUX used to switch between oscclk and pixel_clko, + respectively if HDMI-PHY is off and operational. + - description: Oscillator clock, used as parent of following *_user + clocks in case HDMI-PHY is not operational. + - description: Gate of HDMI SPDIF clock. + clock-names: + items: + - const: hdmi_pclk + - const: hdmi_i_pclk + - const: i_tmds_clk + - const: i_pixel_clk + - const: tmds_clko + - const: tmds_clko_user + - const: pixel_clko + - const: pixel_clko_user + - const: oscclk + - const: i_spdif_clk + required: + - samsung,sysreg-phandle + else: + properties: + clocks: + items: + - description: Gate of HDMI IP bus clock. + - description: Gate of HDMI special clock. + - description: Pixel special clock, one of the two possible inputs + of HDMI clock mux. + - description: HDMI PHY clock output, one of two possible inputs of + HDMI clock mux. + - description: It is required by the driver to switch between the 2 + parents i.e. sclk_pixel and sclk_hdmiphy. If hdmiphy is stable + after configuration, parent is set to sclk_hdmiphy else + sclk_pixel. + clock-names: + items: + - const: hdmi + - const: sclk_hdmi + - const: sclk_pixel + - const: sclk_hdmiphy + - const: mout_hdmi + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos5433.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + hdmi@13970000 { + compatible = "samsung,exynos5433-hdmi"; + reg = <0x13970000 0x70000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu_disp CLK_PCLK_HDMI>, + <&cmu_disp CLK_PCLK_HDMIPHY>, + <&cmu_disp CLK_PHYCLK_HDMIPHY_TMDS_CLKO>, + <&cmu_disp CLK_PHYCLK_HDMI_PIXEL>, + <&cmu_disp CLK_PHYCLK_HDMIPHY_TMDS_CLKO_PHY>, + <&cmu_disp CLK_MOUT_PHYCLK_HDMIPHY_TMDS_CLKO_USER>, + <&cmu_disp CLK_PHYCLK_HDMIPHY_PIXEL_CLKO_PHY>, + <&cmu_disp CLK_MOUT_PHYCLK_HDMIPHY_PIXEL_CLKO_USER>, + <&xxti>, + <&cmu_disp CLK_SCLK_HDMI_SPDIF>; + clock-names = "hdmi_pclk", + "hdmi_i_pclk", + "i_tmds_clk", + "i_pixel_clk", + "tmds_clko", + "tmds_clko_user", + "pixel_clko", + "pixel_clko_user", + "oscclk", + "i_spdif_clk"; + phy = <&hdmiphy>; + ddc = <&hsi2c_11>; + samsung,syscon-phandle = <&pmu_system_controller>; + samsung,sysreg-phandle = <&syscon_disp>; + #sound-dai-cells = <0>; + + hpd-gpios = <&gpa3 0 GPIO_ACTIVE_HIGH>; + vdd-supply = <&ldo6_reg>; + vdd_osc-supply = <&ldo7_reg>; + vdd_pll-supply = <&ldo6_reg>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + hdmi_to_tv: endpoint { + remote-endpoint = <&tv_to_hdmi>; + }; + }; + + port@1 { + reg = <1>; + hdmi_to_mhl: endpoint { + remote-endpoint = <&mhl_to_hdmi>; + }; + }; + }; + }; diff --git a/dts/Bindings/display/samsung/samsung,exynos-mixer.yaml b/dts/Bindings/display/samsung/samsung,exynos-mixer.yaml new file mode 100644 index 0000000000..597c9cc6a3 --- /dev/null +++ b/dts/Bindings/display/samsung/samsung,exynos-mixer.yaml @@ -0,0 +1,142 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/samsung/samsung,exynos-mixer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos SoC Mixer + +maintainers: + - Inki Dae <inki.dae@samsung.com> + - Seung-Woo Kim <sw0312.kim@samsung.com> + - Kyungmin Park <kyungmin.park@samsung.com> + - Krzysztof Kozlowski <krzk@kernel.org> + +description: + Samsung Exynos SoC Mixer is responsible for mixing and blending multiple data + inputs before passing it to an output device. The output is passed to HDMI. + +properties: + compatible: + oneOf: + - enum: + - samsung,exynos4210-mixer + - samsung,exynos4212-mixer + - samsung,exynos5250-mixer + - samsung,exynos5420-mixer + - const: samsung,exynos5-mixer + deprecated: true + + clocks: + minItems: 3 + items: + - description: Gate of Mixer IP bus clock. + - description: Gate of HDMI IP bus clock, needed together with sclk_hdmi. + - description: HDMI Special clock, one of the two possible inputs of + mixer mux. + - description: Video Processor clock. + - description: Mixer mux clock. + - description: Mixer Special clock. + + clock-names: + minItems: 3 + items: + - const: mixer + - const: hdmi + - const: sclk_hdmi + - const: vp + - const: mout_mixer + - const: sclk_mixer + + interconnects: + maxItems: 1 + + interrupts: + maxItems: 1 + + iommus: + maxItems: 1 + + power-domains: + maxItems: 1 + + reg: + minItems: 1 + items: + - description: Mixer memory region. + - description: Video Processor memory region. + +required: + - compatible + - clocks + - clock-names + - interrupts + - reg + +allOf: + - if: + properties: + compatible: + contains: + const: samsung,exynos4210-mixer + - samsung,exynos4212-mixer + then: + properties: + clocks: + minItems: 6 + maxItems: 6 + reg: + minItems: 2 + maxItems: 2 + + - if: + properties: + compatible: + contains: + const: samsung,exynos4212-mixer + then: + properties: + clocks: + minItems: 4 + maxItems: 4 + reg: + minItems: 2 + maxItems: 2 + + - if: + properties: + compatible: + contains: + enum: + - samsung,exynos5-mixer + - samsung,exynos5250-mixer + - samsung,exynos5420-mixer + then: + properties: + clocks: + minItems: 3 + maxItems: 3 + reg: + minItems: 1 + maxItems: 1 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos5250.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + mixer@14450000 { + compatible = "samsung,exynos5250-mixer"; + reg = <0x14450000 0x10000>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_MIXER>, + <&clock CLK_HDMI>, + <&clock CLK_SCLK_HDMI>; + clock-names = "mixer", + "hdmi", + "sclk_hdmi"; + iommus = <&sysmmu_tv>; + power-domains = <&pd_disp1>; + }; diff --git a/dts/Bindings/display/samsung/samsung,exynos5433-decon.yaml b/dts/Bindings/display/samsung/samsung,exynos5433-decon.yaml new file mode 100644 index 0000000000..6380eeebb0 --- /dev/null +++ b/dts/Bindings/display/samsung/samsung,exynos5433-decon.yaml @@ -0,0 +1,145 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/samsung/samsung,exynos5433-decon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos5433 SoC Display and Enhancement Controller (DECON) + +maintainers: + - Inki Dae <inki.dae@samsung.com> + - Seung-Woo Kim <sw0312.kim@samsung.com> + - Kyungmin Park <kyungmin.park@samsung.com> + - Krzysztof Kozlowski <krzk@kernel.org> + +description: | + DECON (Display and Enhancement Controller) is the Display Controller for the + Exynos5433 series of SoCs which transfers the image data from a video memory + buffer to an external LCD interface. + +properties: + compatible: + enum: + - samsung,exynos5433-decon + - samsung,exynos5433-decon-tv + + clocks: + maxItems: 11 + + clock-names: + items: + - const: pclk + - const: aclk_decon + - const: aclk_smmu_decon0x + - const: aclk_xiu_decon0x + - const: pclk_smmu_decon0x + - const: aclk_smmu_decon1x + - const: aclk_xiu_decon1x + - const: pclk_smmu_decon1x + - const: sclk_decon_vclk + - const: sclk_decon_eclk + - const: dsd + + interrupts: + minItems: 3 + maxItems: 4 + description: | + Interrupts depend on mode of work: + - video mode: vsync + - command mode: lcd_sys + - command mode with software trigger: lcd_sys, te + + interrupt-names: + minItems: 3 + items: + - const: fifo + - const: vsync + - const: lcd_sys + - const: te + + iommus: + maxItems: 2 + + iommu-names: + items: + - const: m0 + - const: m1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: + Contains a port which is connected to mic node. + + power-domains: + maxItems: 1 + + reg: + maxItems: 1 + + samsung,disp-sysreg: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to DISP system controller interface. + +required: + - compatible + - clocks + - clock-names + - interrupts + - interrupt-names + - ports + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos5433.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + display-controller@13800000 { + compatible = "samsung,exynos5433-decon"; + reg = <0x13800000 0x2104>; + clocks = <&cmu_disp CLK_PCLK_DECON>, + <&cmu_disp CLK_ACLK_DECON>, + <&cmu_disp CLK_ACLK_SMMU_DECON0X>, + <&cmu_disp CLK_ACLK_XIU_DECON0X>, + <&cmu_disp CLK_PCLK_SMMU_DECON0X>, + <&cmu_disp CLK_ACLK_SMMU_DECON1X>, + <&cmu_disp CLK_ACLK_XIU_DECON1X>, + <&cmu_disp CLK_PCLK_SMMU_DECON1X>, + <&cmu_disp CLK_SCLK_DECON_VCLK>, + <&cmu_disp CLK_SCLK_DECON_ECLK>, + <&cmu_disp CLK_SCLK_DSD>; + clock-names = "pclk", + "aclk_decon", + "aclk_smmu_decon0x", + "aclk_xiu_decon0x", + "pclk_smmu_decon0x", + "aclk_smmu_decon1x", + "aclk_xiu_decon1x", + "pclk_smmu_decon1x", + "sclk_decon_vclk", + "sclk_decon_eclk", + "dsd"; + power-domains = <&pd_disp>; + interrupt-names = "fifo", "vsync", "lcd_sys"; + interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>; + samsung,disp-sysreg = <&syscon_disp>; + iommus = <&sysmmu_decon0x>, <&sysmmu_decon1x>; + iommu-names = "m0", "m1"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + decon_to_mic: endpoint { + remote-endpoint = <&mic_to_decon>; + }; + }; + }; + }; diff --git a/dts/Bindings/display/samsung/samsung,exynos5433-mic.yaml b/dts/Bindings/display/samsung/samsung,exynos5433-mic.yaml new file mode 100644 index 0000000000..26e5017737 --- /dev/null +++ b/dts/Bindings/display/samsung/samsung,exynos5433-mic.yaml @@ -0,0 +1,93 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/samsung/samsung,exynos5433-mic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos5433 SoC Mobile Image Compressor (MIC) + +maintainers: + - Inki Dae <inki.dae@samsung.com> + - Seung-Woo Kim <sw0312.kim@samsung.com> + - Kyungmin Park <kyungmin.park@samsung.com> + - Krzysztof Kozlowski <krzk@kernel.org> + +description: | + MIC (Mobile Image Compressor) resides between DECON and MIPI DSI. MIPI DSI is + not capable of transferring high resoltuion frame data as DECON can send. MIC + solves this problem by compressing the frame data by 1/2 before it is + transferred through MIPI DSI. The compressed frame data must be uncompressed + in the panel PCB. + +properties: + compatible: + const: samsung,exynos5433-mic + + clocks: + maxItems: 2 + + clock-names: + items: + - const: pclk_mic0 + - const: sclk_rgb_vclk_to_mic0 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: + Contains a port which is connected to mic node. + + power-domains: + maxItems: 1 + + reg: + maxItems: 1 + + samsung,disp-syscon: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to DISP system controller interface. + +required: + - compatible + - clocks + - clock-names + - ports + - reg + - samsung,disp-syscon + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos5433.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + image-processor@13930000 { + compatible = "samsung,exynos5433-mic"; + reg = <0x13930000 0x48>; + clocks = <&cmu_disp CLK_PCLK_MIC0>, + <&cmu_disp CLK_SCLK_RGB_VCLK_TO_MIC0>; + clock-names = "pclk_mic0", + "sclk_rgb_vclk_to_mic0"; + power-domains = <&pd_disp>; + samsung,disp-syscon = <&syscon_disp>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mic_to_decon: endpoint { + remote-endpoint = <&decon_to_mic>; + }; + }; + + port@1 { + reg = <1>; + mic_to_dsi: endpoint { + remote-endpoint = <&dsi_to_mic>; + }; + }; + }; + }; diff --git a/dts/Bindings/display/samsung/samsung,exynos7-decon.yaml b/dts/Bindings/display/samsung/samsung,exynos7-decon.yaml new file mode 100644 index 0000000000..992c23ca7a --- /dev/null +++ b/dts/Bindings/display/samsung/samsung,exynos7-decon.yaml @@ -0,0 +1,119 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/samsung/samsung,exynos7-decon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos7 SoC Display and Enhancement Controller (DECON) + +maintainers: + - Inki Dae <inki.dae@samsung.com> + - Seung-Woo Kim <sw0312.kim@samsung.com> + - Kyungmin Park <kyungmin.park@samsung.com> + - Krzysztof Kozlowski <krzk@kernel.org> + +description: | + DECON (Display and Enhancement Controller) is the Display Controller for the + Exynos7 series of SoCs which transfers the image data from a video memory + buffer to an external LCD interface. + +properties: + compatible: + const: samsung,exynos7-decon + + clocks: + maxItems: 4 + + clock-names: + items: + - const: pclk_decon0 + - const: aclk_decon0 + - const: decon0_eclk + - const: decon0_vclk + + display-timings: + $ref: ../panel/display-timings.yaml# + + i80-if-timings: + type: object + additionalProperties: false + description: timing configuration for lcd i80 interface support + properties: + cs-setup: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Clock cycles for the active period of address signal is enabled until + chip select is enabled. + default: 0 + + wr-active: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Clock cycles for the active period of CS is enabled. + default: 1 + + wr-hold: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Clock cycles for the active period of CS is disabled until write + signal is disabled. + default: 0 + + wr-setup: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Clock cycles for the active period of CS signal is enabled until + write signal is enabled. + default: 0 + + interrupts: + items: + - description: FIFO level + - description: VSYNC + - description: LCD system + + interrupt-names: + items: + - const: fifo + - const: vsync + - const: lcd_sys + + power-domains: + maxItems: 1 + + reg: + maxItems: 1 + +required: + - compatible + - clocks + - clock-names + - interrupts + - interrupt-names + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos7-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + display-controller@13930000 { + compatible = "samsung,exynos7-decon"; + reg = <0x13930000 0x1000>; + interrupt-names = "fifo", "vsync", "lcd_sys"; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock_disp 100>, /* PCLK_DECON_INT */ + <&clock_disp 101>, /* ACLK_DECON_INT */ + <&clock_disp 102>, /* SCLK_DECON_INT_ECLK */ + <&clock_disp 103>; /* SCLK_DECON_INT_EXTCLKPLL */ + clock-names = "pclk_decon0", + "aclk_decon0", + "decon0_eclk", + "decon0_vclk"; + pinctrl-0 = <&lcd_clk &pwm1_out>; + pinctrl-names = "default"; + }; diff --git a/dts/Bindings/display/samsung/samsung,fimd.yaml b/dts/Bindings/display/samsung/samsung,fimd.yaml new file mode 100644 index 0000000000..075231716b --- /dev/null +++ b/dts/Bindings/display/samsung/samsung,fimd.yaml @@ -0,0 +1,197 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/samsung/samsung,fimd.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S3C/S5P/Exynos SoC Fully Interactive Mobile Display (FIMD) + +maintainers: + - Inki Dae <inki.dae@samsung.com> + - Seung-Woo Kim <sw0312.kim@samsung.com> + - Kyungmin Park <kyungmin.park@samsung.com> + - Krzysztof Kozlowski <krzk@kernel.org> + +properties: + compatible: + enum: + - samsung,s3c2443-fimd + - samsung,s3c6400-fimd + - samsung,s5pv210-fimd + - samsung,exynos3250-fimd + - samsung,exynos4210-fimd + - samsung,exynos5250-fimd + - samsung,exynos5420-fimd + + '#address-cells': + const: 1 + + clocks: + maxItems: 2 + + clock-names: + items: + - const: sclk_fimd + - const: fimd + + display-timings: + $ref: ../panel/display-timings.yaml# + + i80-if-timings: + type: object + additionalProperties: false + description: | + Timing configuration for lcd i80 interface support. + The parameters are defined as:: + VCLK(internal) __|??????|_____|??????|_____|??????|_____|??????|_____|?? + : : : : : + Address Output --:<XXXXXXXXXXX:XXXXXXXXXXXX:XXXXXXXXXXXX:XXXXXXXXXXXX:XX + | cs-setup+1 | : : : + |<---------->| : : : + Chip Select ???????????????|____________:____________:____________|?? + | wr-setup+1 | | wr-hold+1 | + |<---------->| |<---------->| + Write Enable ????????????????????????????|____________|??????????????? + | wr-active+1| + |<---------->| + Video Data ----------------------------<XXXXXXXXXXXXXXXXXXXXXXXXX>-- + + properties: + cs-setup: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Clock cycles for the active period of address signal is enabled until + chip select is enabled. + default: 0 + + wr-active: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Clock cycles for the active period of CS is enabled. + default: 1 + + wr-hold: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Clock cycles for the active period of CS is disabled until write + signal is disabled. + default: 0 + + wr-setup: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Clock cycles for the active period of CS signal is enabled until + write signal is enabled. + default: 0 + + iommus: + minItems: 1 + maxItems: 2 + + iommu-names: + items: + - const: m0 + - const: m1 + + interrupts: + items: + - description: FIFO level + - description: VSYNC + - description: LCD system + + interrupt-names: + items: + - const: fifo + - const: vsync + - const: lcd_sys + + power-domains: + maxItems: 1 + + reg: + maxItems: 1 + + samsung,invert-vden: + type: boolean + description: + Video enable signal is inverted. + + samsung,invert-vclk: + type: boolean + description: + Video clock signal is inverted. + + samsung,sysreg: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to System Register syscon. + + '#size-cells': + const: 0 + +patternProperties: + "^port@[0-4]+$": + $ref: /schemas/graph.yaml#/properties/port + description: | + Contains ports with port with index:: + 0 - for CAMIF0 input, + 1 - for CAMIF1 input, + 2 - for CAMIF2 input, + 3 - for parallel output, + 4 - for write-back interface + +required: + - compatible + - clocks + - clock-names + - interrupts + - interrupt-names + - reg + +allOf: + - if: + properties: + compatible: + contains: + const: samsung,exynos5420-fimd + then: + properties: + iommus: + minItems: 2 + maxItems: 2 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos4.h> + + fimd@11c00000 { + compatible = "samsung,exynos4210-fimd"; + interrupt-parent = <&combiner>; + reg = <0x11c00000 0x20000>; + interrupt-names = "fifo", "vsync", "lcd_sys"; + interrupts = <11 0>, <11 1>, <11 2>; + clocks = <&clock CLK_SCLK_FIMD0>, <&clock CLK_FIMD0>; + clock-names = "sclk_fimd", "fimd"; + power-domains = <&pd_lcd0>; + iommus = <&sysmmu_fimd0>; + samsung,sysreg = <&sys_reg>; + + #address-cells = <1>; + #size-cells = <0>; + + samsung,invert-vden; + samsung,invert-vclk; + + pinctrl-0 = <&lcd_clk>, <&lcd_data24>; + pinctrl-names = "default"; + + port@3 { + reg = <3>; + + fimd_dpi_ep: endpoint { + remote-endpoint = <&lcd_ep>; + }; + }; + }; diff --git a/dts/Bindings/display/simple-framebuffer.yaml b/dts/Bindings/display/simple-framebuffer.yaml index 1db608c9ee..296500f9da 100644 --- a/dts/Bindings/display/simple-framebuffer.yaml +++ b/dts/Bindings/display/simple-framebuffer.yaml @@ -4,10 +4,9 @@ $id: http://devicetree.org/schemas/display/simple-framebuffer.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Simple Framebuffer Device Tree Bindings +title: Simple Framebuffer maintainers: - - Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> - Hans de Goede <hdegoede@redhat.com> description: |+ @@ -27,6 +26,11 @@ description: |+ over control to a driver for the real hardware. The bindings for the hw nodes must specify which node is considered the primary node. + If a panel node is given, then the driver uses this to configure the + physical width and height of the display. If no panel node is given, + then the driver uses the width and height properties of the simplefb + node to estimate it. + It is advised to add display# aliases to help the OS determine how to number things. If display# aliases are used, then if the simplefb node contains a display property then the /aliases/display# path @@ -52,15 +56,23 @@ description: |+ properties: compatible: - items: - - enum: - - allwinner,simple-framebuffer - - amlogic,simple-framebuffer + oneOf: + - items: + - enum: + - apple,simple-framebuffer + - allwinner,simple-framebuffer + - amlogic,simple-framebuffer + - const: simple-framebuffer - const: simple-framebuffer reg: description: Location and size of the framebuffer memory + memory-region: + maxItems: 1 + description: Phandle to a node describing the memory to be used for the + framebuffer. If present, overrides the "reg" property (if one exists). + clocks: description: List of clocks used by the framebuffer. @@ -82,16 +94,38 @@ properties: format: description: > Format of the framebuffer: + * `a1r5g5b5` - 16-bit pixels, d[15]=a, d[14:10]=r, d[9:5]=g, d[4:0]=b + * `a2r10g10b10` - 32-bit pixels, d[31:30]=a, d[29:20]=r, d[19:10]=g, d[9:0]=b * `a8b8g8r8` - 32-bit pixels, d[31:24]=a, d[23:16]=b, d[15:8]=g, d[7:0]=r + * `a8r8g8b8` - 32-bit pixels, d[31:24]=a, d[23:16]=r, d[15:8]=g, d[7:0]=b * `r5g6b5` - 16-bit pixels, d[15:11]=r, d[10:5]=g, d[4:0]=b + * `r5g5b5a1` - 16-bit pixels, d[15:11]=r, d[10:6]=g, d[5:1]=b d[1:0]=a + * `r8g8b8` - 24-bit pixels, d[23:16]=r, d[15:8]=g, d[7:0]=b + * `x1r5g5b5` - 16-bit pixels, d[14:10]=r, d[9:5]=g, d[4:0]=b + * `x2r10g10b10` - 32-bit pixels, d[29:20]=r, d[19:10]=g, d[9:0]=b + * `x8r8g8b8` - 32-bit pixels, d[23:16]=r, d[15:8]=g, d[7:0]=b + * `x8b8g8r8` - 32-bit pixels, d[23:16]=b, d[15:8]=g, d[7:0]=r enum: + - a1r5g5b5 + - a2r10g10b10 - a8b8g8r8 + - a8r8g8b8 - r5g6b5 + - r5g5b5a1 + - r8g8b8 + - x1r5g5b5 + - x2r10g10b10 + - x8r8g8b8 + - x8b8g8r8 display: $ref: /schemas/types.yaml#/definitions/phandle description: Primary display hardware node + panel: + $ref: /schemas/types.yaml#/definitions/phandle + description: Display panel node + allwinner,pipeline: description: Pipeline used by the framebuffer on Allwinner SoCs enum: @@ -152,28 +186,28 @@ additionalProperties: false examples: - | - aliases { - display0 = &lcdc0; + / { + compatible = "foo"; + model = "foo"; + #address-cells = <1>; + #size-cells = <1>; + + chosen { + #address-cells = <1>; + #size-cells = <1>; + framebuffer0: framebuffer@1d385000 { + compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; + allwinner,pipeline = "de_be0-lcd0"; + reg = <0x1d385000 3840000>; + width = <1600>; + height = <1200>; + stride = <3200>; + format = "r5g6b5"; + clocks = <&ahb_gates 36>, <&ahb_gates 43>, <&ahb_gates 44>; + lcd-supply = <®_dc1sw>; + display = <&lcdc0>; + }; + }; }; - chosen { - #address-cells = <1>; - #size-cells = <1>; - stdout-path = "display0"; - framebuffer0: framebuffer@1d385000 { - compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; - allwinner,pipeline = "de_be0-lcd0"; - reg = <0x1d385000 3840000>; - width = <1600>; - height = <1200>; - stride = <3200>; - format = "r5g6b5"; - clocks = <&ahb_gates 36>, <&ahb_gates 43>, <&ahb_gates 44>; - lcd-supply = <®_dc1sw>; - display = <&lcdc0>; - }; - }; - - lcdc0: lcdc { }; - ... diff --git a/dts/Bindings/display/sitronix,st7735r.yaml b/dts/Bindings/display/sitronix,st7735r.yaml index 0cebaaefda..3b0ebc0db8 100644 --- a/dts/Bindings/display/sitronix,st7735r.yaml +++ b/dts/Bindings/display/sitronix,st7735r.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/display/sitronix,st7735r.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Sitronix ST7735R Display Panels Device Tree Bindings +title: Sitronix ST7735R Display Panels maintainers: - David Lechner <david@lechnology.com> @@ -15,6 +15,7 @@ description: allOf: - $ref: panel/panel-common.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# properties: compatible: @@ -32,15 +33,13 @@ properties: - okaya,rh128128t - const: sitronix,st7715r - spi-max-frequency: - maximum: 32000000 - dc-gpios: maxItems: 1 description: Display data/command selection (D/CX) backlight: true reg: true + spi-max-frequency: true reset-gpios: true rotation: true @@ -48,7 +47,6 @@ required: - compatible - reg - dc-gpios - - reset-gpios additionalProperties: false @@ -56,11 +54,6 @@ examples: - | #include <dt-bindings/gpio/gpio.h> - backlight: backlight { - compatible = "gpio-backlight"; - gpios = <&gpio 44 GPIO_ACTIVE_HIGH>; - }; - spi { #address-cells = <1>; #size-cells = <0>; @@ -72,6 +65,7 @@ examples: dc-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>; reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>; rotation = <270>; + backlight = <&backlight>; }; }; diff --git a/dts/Bindings/display/solomon,ssd-common.yaml b/dts/Bindings/display/solomon,ssd-common.yaml new file mode 100644 index 0000000000..3e6998481a --- /dev/null +++ b/dts/Bindings/display/solomon,ssd-common.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/solomon,ssd-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common properties for Solomon OLED Display Controllers + +maintainers: + - Javier Martinez Canillas <javierm@redhat.com> + +properties: + reg: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + # Only required for SPI + dc-gpios: + description: + GPIO connected to the controller's D/C# (Data/Command) pin, + that is needed for 4-wire SPI to tell the controller if the + data sent is for a command register or the display data RAM + maxItems: 1 + + solomon,height: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Height in pixel of the screen driven by the controller. + The default value is controller-dependent. + + solomon,width: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Width in pixel of the screen driven by the controller. + The default value is controller-dependent. + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +additionalProperties: true diff --git a/dts/Bindings/display/solomon,ssd1307fb.yaml b/dts/Bindings/display/solomon,ssd1307fb.yaml new file mode 100644 index 0000000000..3afbb52d1b --- /dev/null +++ b/dts/Bindings/display/solomon,ssd1307fb.yaml @@ -0,0 +1,269 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/solomon,ssd1307fb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Solomon SSD1307 OLED Controller Framebuffer + +maintainers: + - Maxime Ripard <mripard@kernel.org> + - Javier Martinez Canillas <javierm@redhat.com> + +properties: + compatible: + oneOf: + # Deprecated compatible strings + - enum: + - solomon,ssd1305fb-i2c + - solomon,ssd1306fb-i2c + - solomon,ssd1307fb-i2c + - solomon,ssd1309fb-i2c + deprecated: true + - enum: + - sinowealth,sh1106 + - solomon,ssd1305 + - solomon,ssd1306 + - solomon,ssd1307 + - solomon,ssd1309 + + pwms: + maxItems: 1 + + vbat-supply: + description: The supply for VBAT + + solomon,page-offset: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 1 + description: + Offset of pages (band of 8 pixels) that the screen is mapped to + + solomon,segment-no-remap: + type: boolean + description: + Display needs normal (non-inverted) data column to segment mapping + + solomon,col-offset: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + description: + Offset of columns (COL/SEG) that the screen is mapped to + + solomon,com-seq: + type: boolean + description: + Display uses sequential COM pin configuration + + solomon,com-lrremap: + type: boolean + description: + Display uses left-right COM pin remap + + solomon,com-invdir: + type: boolean + description: + Display uses inverted COM pin scan direction + + solomon,com-offset: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + description: + Number of the COM pin wired to the first display line + + solomon,prechargep1: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 2 + description: + Length of deselect period (phase 1) in clock cycles + + solomon,prechargep2: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 2 + description: + Length of precharge period (phase 2) in clock cycles. This needs to be + the higher, the higher the capacitance of the OLED's pixels is. + + solomon,dclk-div: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 16 + description: + Clock divisor. The default value is controller-dependent. + + solomon,dclk-frq: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: + Clock frequency, higher value means higher frequency. + The default value is controller-dependent. + + solomon,lookup-table: + $ref: /schemas/types.yaml#/definitions/uint8-array + maxItems: 4 + description: + 8 bit value array of current drive pulse widths for BANK0, and colors A, + B, and C. Each value in range of 31 to 63 for pulse widths of 32 to 64. + Color D is always width 64. + + solomon,area-color-enable: + type: boolean + description: + Display uses color mode + + solomon,low-power: + type: boolean + description: + Display runs in low power mode + +required: + - compatible + - reg + +allOf: + - $ref: solomon,ssd-common.yaml# + + - if: + properties: + compatible: + contains: + const: sinowealth,sh1106 + then: + properties: + width: + default: 132 + height: + default: 64 + solomon,dclk-div: + default: 1 + solomon,dclk-frq: + default: 5 + + - if: + properties: + compatible: + contains: + enum: + - solomon,ssd1305-i2c + - solomon,ssd1305 + then: + properties: + width: + default: 132 + height: + default: 64 + solomon,dclk-div: + default: 1 + solomon,dclk-frq: + default: 7 + + - if: + properties: + compatible: + contains: + enum: + - solomon,ssd1306-i2c + - solomon,ssd1306 + then: + properties: + width: + default: 128 + height: + default: 64 + solomon,dclk-div: + default: 1 + solomon,dclk-frq: + default: 8 + + - if: + properties: + compatible: + contains: + enum: + - solomon,ssd1307-i2c + - solomon,ssd1307 + then: + properties: + width: + default: 128 + height: + default: 39 + solomon,dclk-div: + default: 2 + solomon,dclk-frq: + default: 12 + required: + - pwms + + - if: + properties: + compatible: + contains: + enum: + - solomon,ssd1309-i2c + - solomon,ssd1309 + then: + properties: + width: + default: 128 + height: + default: 64 + solomon,dclk-div: + default: 1 + solomon,dclk-frq: + default: 10 + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ssd1307_i2c: oled@3c { + compatible = "solomon,ssd1307"; + reg = <0x3c>; + pwms = <&pwm 4 3000>; + reset-gpios = <&gpio2 7>; + }; + + ssd1306_i2c: oled@3d { + compatible = "solomon,ssd1306"; + reg = <0x3d>; + pwms = <&pwm 4 3000>; + reset-gpios = <&gpio2 7>; + solomon,com-lrremap; + solomon,com-invdir; + solomon,com-offset = <32>; + solomon,lookup-table = /bits/ 8 <0x3f 0x3f 0x3f 0x3f>; + }; + }; + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + ssd1307_spi: oled@0 { + compatible = "solomon,ssd1307"; + reg = <0x0>; + pwms = <&pwm 4 3000>; + reset-gpios = <&gpio2 7>; + dc-gpios = <&gpio2 8>; + spi-max-frequency = <10000000>; + }; + + ssd1306_spi: oled@1 { + compatible = "solomon,ssd1306"; + reg = <0x1>; + pwms = <&pwm 4 3000>; + reset-gpios = <&gpio2 7>; + dc-gpios = <&gpio2 8>; + spi-max-frequency = <10000000>; + solomon,com-lrremap; + solomon,com-invdir; + solomon,com-offset = <32>; + solomon,lookup-table = /bits/ 8 <0x3f 0x3f 0x3f 0x3f>; + }; + }; diff --git a/dts/Bindings/display/solomon,ssd132x.yaml b/dts/Bindings/display/solomon,ssd132x.yaml new file mode 100644 index 0000000000..37975ee61c --- /dev/null +++ b/dts/Bindings/display/solomon,ssd132x.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/solomon,ssd132x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Solomon SSD132x OLED Display Controllers + +maintainers: + - Javier Martinez Canillas <javierm@redhat.com> + +properties: + compatible: + enum: + - solomon,ssd1322 + - solomon,ssd1325 + - solomon,ssd1327 + +required: + - compatible + - reg + +allOf: + - $ref: solomon,ssd-common.yaml# + + - if: + properties: + compatible: + contains: + const: solomon,ssd1322 + then: + properties: + width: + default: 480 + height: + default: 128 + + - if: + properties: + compatible: + contains: + const: solomon,ssd1325 + then: + properties: + width: + default: 128 + height: + default: 80 + + - if: + properties: + compatible: + contains: + const: solomon,ssd1327 + then: + properties: + width: + default: 128 + height: + default: 128 + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + oled@3c { + compatible = "solomon,ssd1327"; + reg = <0x3c>; + reset-gpios = <&gpio2 7>; + }; + + }; + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + oled@0 { + compatible = "solomon,ssd1327"; + reg = <0x0>; + reset-gpios = <&gpio2 7>; + dc-gpios = <&gpio2 8>; + spi-max-frequency = <10000000>; + }; + }; diff --git a/dts/Bindings/display/sprd/sprd,display-subsystem.yaml b/dts/Bindings/display/sprd/sprd,display-subsystem.yaml new file mode 100644 index 0000000000..b3d5e1b96f --- /dev/null +++ b/dts/Bindings/display/sprd/sprd,display-subsystem.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/sprd/sprd,display-subsystem.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Unisoc DRM master device + +maintainers: + - Kevin Tang <kevin.tang@unisoc.com> + +description: | + The Unisoc DRM master device is a virtual device needed to list all + DPU devices or other display interface nodes that comprise the + graphics subsystem. + + Unisoc's display pipeline have several components as below description, + multi display controllers and corresponding physical interfaces. + For different display scenarios, dpu0 and dpu1 maybe binding to different + encoder. + + E.g: + dpu0 and dpu1 both binding to DSI for dual mipi-dsi display; + dpu0 binding to DSI for primary display, and dpu1 binding to DP for external display; + + +-----------------------------------------+ + | | + | +---------+ | + +----+ | +----+ +---------+ |DPHY/CPHY| | +------+ + | +----->+dpu0+--->+MIPI|DSI +--->+Combo +----->+Panel0| + |AXI | | +----+ +---------+ +---------+ | +------+ + | | | ^ | + | | | | | + | | | +-----------+ | + | | | | | + |APB | | +--+-+ +-----------+ +---+ | +------+ + | +----->+dpu1+--->+DisplayPort+--->+PHY+--------->+Panel1| + | | | +----+ +-----------+ +---+ | +------+ + +----+ | | + +-----------------------------------------+ + +properties: + compatible: + const: sprd,display-subsystem + + ports: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 + description: + Should contain a list of phandles pointing to display interface port + of DPU devices. + +required: + - compatible + - ports + +additionalProperties: false + +examples: + - | + display-subsystem { + compatible = "sprd,display-subsystem"; + ports = <&dpu_out>; + }; diff --git a/dts/Bindings/display/sprd/sprd,sharkl3-dpu.yaml b/dts/Bindings/display/sprd/sprd,sharkl3-dpu.yaml new file mode 100644 index 0000000000..4ebea60b8c --- /dev/null +++ b/dts/Bindings/display/sprd/sprd,sharkl3-dpu.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/sprd/sprd,sharkl3-dpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Unisoc Sharkl3 Display Processor Unit (DPU) + +maintainers: + - Kevin Tang <kevin.tang@unisoc.com> + +description: | + DPU (Display Processor Unit) is the Display Controller for the Unisoc SoCs + which transfers the image data from a video memory buffer to an internal + LCD interface. + +properties: + compatible: + const: sprd,sharkl3-dpu + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 2 + + clock-names: + items: + - const: clk_src_128m + - const: clk_src_384m + + power-domains: + maxItems: 1 + + iommus: + maxItems: 1 + + port: + type: object + description: + A port node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + That port should be the output endpoint, usually output to + the associated DSI. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/sprd,sc9860-clk.h> + dpu: dpu@63000000 { + compatible = "sprd,sharkl3-dpu"; + reg = <0x63000000 0x1000>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "clk_src_128m", "clk_src_384m"; + + clocks = <&pll CLK_TWPLL_128M>, + <&pll CLK_TWPLL_384M>; + + dpu_port: port { + dpu_out: endpoint { + remote-endpoint = <&dsi_in>; + }; + }; + }; diff --git a/dts/Bindings/display/sprd/sprd,sharkl3-dsi-host.yaml b/dts/Bindings/display/sprd/sprd,sharkl3-dsi-host.yaml new file mode 100644 index 0000000000..bc5594d186 --- /dev/null +++ b/dts/Bindings/display/sprd/sprd,sharkl3-dsi-host.yaml @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/sprd/sprd,sharkl3-dsi-host.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Unisoc MIPI DSI Controller + +maintainers: + - Kevin Tang <kevin.tang@unisoc.com> + +properties: + compatible: + const: sprd,sharkl3-dsi-host + + reg: + maxItems: 1 + + interrupts: + maxItems: 2 + + clocks: + minItems: 1 + + clock-names: + items: + - const: clk_src_96m + + power-domains: + maxItems: 1 + + ports: + type: object + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + port@0: + type: object + description: + A port node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + That port should be the input endpoint, usually coming from + the associated DPU. + + required: + - "#address-cells" + - "#size-cells" + - port@0 + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/sprd,sc9860-clk.h> + dsi: dsi@63100000 { + compatible = "sprd,sharkl3-dsi-host"; + reg = <0x63100000 0x1000>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "clk_src_96m"; + clocks = <&pll CLK_TWPLL_96M>; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + dsi_in: endpoint { + remote-endpoint = <&dpu_out>; + }; + }; + }; + }; diff --git a/dts/Bindings/display/ssd1307fb.txt b/dts/Bindings/display/ssd1307fb.txt deleted file mode 100644 index 27333b9551..0000000000 --- a/dts/Bindings/display/ssd1307fb.txt +++ /dev/null @@ -1,59 +0,0 @@ -* Solomon SSD1307 Framebuffer Driver - -Required properties: - - compatible: Should be "solomon,<chip>fb-<bus>". The only supported bus for - now is i2c, and the supported chips are ssd1305, ssd1306, ssd1307 and - ssd1309. - - reg: Should contain address of the controller on the I2C bus. Most likely - 0x3c or 0x3d - - pwm: Should contain the pwm to use according to the OF device tree PWM - specification [0]. Only required for the ssd1307. - - solomon,height: Height in pixel of the screen driven by the controller - - solomon,width: Width in pixel of the screen driven by the controller - - solomon,page-offset: Offset of pages (band of 8 pixels) that the screen is - mapped to. - -Optional properties: - - reset-gpios: The GPIO used to reset the OLED display, if available. See - Documentation/devicetree/bindings/gpio/gpio.txt for details. - - vbat-supply: The supply for VBAT - - solomon,segment-no-remap: Display needs normal (non-inverted) data column - to segment mapping - - solomon,com-seq: Display uses sequential COM pin configuration - - solomon,com-lrremap: Display uses left-right COM pin remap - - solomon,com-invdir: Display uses inverted COM pin scan direction - - solomon,com-offset: Number of the COM pin wired to the first display line - - solomon,prechargep1: Length of deselect period (phase 1) in clock cycles. - - solomon,prechargep2: Length of precharge period (phase 2) in clock cycles. - This needs to be the higher, the higher the capacitance - of the OLED's pixels is - - solomon,dclk-div: Clock divisor 1 to 16 - - solomon,dclk-frq: Clock frequency 0 to 15, higher value means higher - frequency - - solomon,lookup-table: 8 bit value array of current drive pulse widths for - BANK0, and colors A, B, and C. Each value in range - of 31 to 63 for pulse widths of 32 to 64. Color D - is always width 64. - - solomon,area-color-enable: Display uses color mode - - solomon,low-power. Display runs in low power mode - -[0]: Documentation/devicetree/bindings/pwm/pwm.txt - -Examples: -ssd1307: oled@3c { - compatible = "solomon,ssd1307fb-i2c"; - reg = <0x3c>; - pwms = <&pwm 4 3000>; - reset-gpios = <&gpio2 7>; -}; - -ssd1306: oled@3c { - compatible = "solomon,ssd1306fb-i2c"; - reg = <0x3c>; - pwms = <&pwm 4 3000>; - reset-gpios = <&gpio2 7>; - solomon,com-lrremap; - solomon,com-invdir; - solomon,com-offset = <32>; - solomon,lookup-table = /bits/ 8 <0x3f 0x3f 0x3f 0x3f>; -}; diff --git a/dts/Bindings/display/st,stm32-dsi.yaml b/dts/Bindings/display/st,stm32-dsi.yaml index 3be76d15bf..53560052aa 100644 --- a/dts/Bindings/display/st,stm32-dsi.yaml +++ b/dts/Bindings/display/st,stm32-dsi.yaml @@ -7,12 +7,15 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: STMicroelectronics STM32 DSI host controller maintainers: - - Philippe Cornu <philippe.cornu@st.com> - - Yannick Fertre <yannick.fertre@st.com> + - Philippe Cornu <philippe.cornu@foss.st.com> + - Yannick Fertre <yannick.fertre@foss.st.com> description: The STMicroelectronics STM32 DSI controller uses the Synopsys DesignWare MIPI-DSI host controller. +allOf: + - $ref: dsi-controller.yaml# + properties: compatible: const: st,stm32-dsi @@ -26,7 +29,6 @@ properties: - description: DSI bus clock - description: Pixel clock minItems: 2 - maxItems: 3 clock-names: items: @@ -34,7 +36,6 @@ properties: - const: ref - const: px_clk minItems: 2 - maxItems: 3 resets: maxItems: 1 @@ -45,54 +46,41 @@ properties: phy-dsi-supply: description: - Phandle of the regulator that provides the supply voltage. + Phandle of the regulator that provides the supply voltage. ports: - type: object - description: - A node containing DSI input & output port nodes with endpoint - definitions as documented in - Documentation/devicetree/bindings/media/video-interfaces.txt - Documentation/devicetree/bindings/graph.txt + $ref: /schemas/graph.yaml#/properties/ports + properties: port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: DSI input port node, connected to the ltdc rgb output port. port@1: - type: object - description: - DSI output port node, connected to a panel or a bridge input port" - -patternProperties: - "^(panel|panel-dsi)@[0-9]$": - type: object - description: - A node containing the panel or bridge description as documented in - Documentation/devicetree/bindings/display/mipi-dsi-bus.txt - properties: - port: - type: object - description: - Panel or bridge port node, connected to the DSI output port (port@1) - - "#address-cells": - const: 1 - - "#size-cells": - const: 0 + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: | + DSI output port node, connected to a panel or a bridge input port. + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + properties: + data-lanes: + minItems: 1 + items: + - const: 1 + - const: 2 required: - - "#address-cells" - - "#size-cells" - compatible - reg - clocks - clock-names - ports -additionalProperties: false +unevaluatedProperties: false examples: - | @@ -131,7 +119,7 @@ examples: }; }; - panel-dsi@0 { + panel@0 { compatible = "orisetech,otm8009a"; reg = <0>; reset-gpios = <&gpioe 4 GPIO_ACTIVE_LOW>; @@ -146,5 +134,3 @@ examples: }; ... - - diff --git a/dts/Bindings/display/st,stm32-ltdc.yaml b/dts/Bindings/display/st,stm32-ltdc.yaml index bf8ad916e9..d6ea4d62a2 100644 --- a/dts/Bindings/display/st,stm32-ltdc.yaml +++ b/dts/Bindings/display/st,stm32-ltdc.yaml @@ -7,8 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: STMicroelectronics STM32 lcd-tft display controller maintainers: - - Philippe Cornu <philippe.cornu@st.com> - - Yannick Fertre <yannick.fertre@st.com> + - Philippe Cornu <philippe.cornu@foss.st.com> + - Yannick Fertre <yannick.fertre@foss.st.com> properties: compatible: @@ -22,7 +22,6 @@ properties: - description: events interrupt line. - description: errors interrupt line. minItems: 1 - maxItems: 2 clocks: maxItems: 1 @@ -35,15 +34,13 @@ properties: maxItems: 1 port: - type: object - description: - "Video port for DPI RGB output. + $ref: /schemas/graph.yaml#/properties/port + description: | + Video port for DPI RGB output. ltdc has one video port with up to 2 endpoints: - for external dpi rgb panel or bridge, using gpios. - for internal dpi input of the MIPI DSI host controller. Note: These 2 endpoints cannot be activated simultaneously. - Please refer to the bindings defined in - Documentation/devicetree/bindings/media/video-interfaces.txt." required: - compatible @@ -78,4 +75,3 @@ examples: }; ... - diff --git a/dts/Bindings/display/ste,mcde.txt b/dts/Bindings/display/ste,mcde.txt deleted file mode 100644 index 4c33c692bd..0000000000 --- a/dts/Bindings/display/ste,mcde.txt +++ /dev/null @@ -1,104 +0,0 @@ -ST-Ericsson Multi Channel Display Engine MCDE - -The ST-Ericsson MCDE is a display controller with support for compositing -and displaying several channels memory resident graphics data on DSI or -LCD displays or bridges. It is used in the ST-Ericsson U8500 platform. - -Required properties: - -- compatible: must be: - "ste,mcde" -- reg: register base for the main MCDE control registers, should be - 0x1000 in size -- interrupts: the interrupt line for the MCDE -- epod-supply: a phandle to the EPOD regulator -- vana-supply: a phandle to the analog voltage regulator -- clocks: an array of the MCDE clocks in this strict order: - MCDECLK (main MCDE clock), LCDCLK (LCD clock), PLLDSI - (HDMI clock), DSI0ESCLK (DSI0 energy save clock), - DSI1ESCLK (DSI1 energy save clock), DSI2ESCLK (DSI2 energy - save clock) -- clock-names: must be the following array: - "mcde", "lcd", "hdmi" - to match the required clock inputs above. -- #address-cells: should be <1> (for the DSI hosts that will be children) -- #size-cells: should be <1> (for the DSI hosts that will be children) -- ranges: this should always be stated - -Required subnodes: - -The devicetree must specify subnodes for the DSI host adapters. -These must have the following characteristics: - -- compatible: must be: - "ste,mcde-dsi" -- reg: must specify the register range for the DSI host -- vana-supply: phandle to the VANA voltage regulator -- clocks: phandles to the high speed and low power (energy save) clocks - the high speed clock is not present on the third (dsi2) block, so it - should only have the "lp" clock -- clock-names: "hs" for the high speed clock and "lp" for the low power - (energy save) clock -- #address-cells: should be <1> -- #size-cells: should be <0> - -Display panels and bridges will appear as children on the DSI hosts, and -the displays are connected to the DSI hosts using the common binding -for video transmitter interfaces; see -Documentation/devicetree/bindings/media/video-interfaces.txt - -If a DSI host is unused (not connected) it will have no children defined. - -Example: - -mcde@a0350000 { - compatible = "ste,mcde"; - reg = <0xa0350000 0x1000>; - interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; - epod-supply = <&db8500_b2r2_mcde_reg>; - vana-supply = <&ab8500_ldo_ana_reg>; - clocks = <&prcmu_clk PRCMU_MCDECLK>, /* Main MCDE clock */ - <&prcmu_clk PRCMU_LCDCLK>, /* LCD clock */ - <&prcmu_clk PRCMU_PLLDSI>; /* HDMI clock */ - clock-names = "mcde", "lcd", "hdmi"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - dsi0: dsi@a0351000 { - compatible = "ste,mcde-dsi"; - reg = <0xa0351000 0x1000>; - vana-supply = <&ab8500_ldo_ana_reg>; - clocks = <&prcmu_clk PRCMU_DSI0CLK>, <&prcmu_clk PRCMU_DSI0ESCCLK>; - clock-names = "hs", "lp"; - #address-cells = <1>; - #size-cells = <0>; - - panel { - compatible = "samsung,s6d16d0"; - reg = <0>; - vdd1-supply = <&ab8500_ldo_aux1_reg>; - reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; - }; - - }; - dsi1: dsi@a0352000 { - compatible = "ste,mcde-dsi"; - reg = <0xa0352000 0x1000>; - vana-supply = <&ab8500_ldo_ana_reg>; - clocks = <&prcmu_clk PRCMU_DSI1CLK>, <&prcmu_clk PRCMU_DSI1ESCCLK>; - clock-names = "hs", "lp"; - #address-cells = <1>; - #size-cells = <0>; - }; - dsi2: dsi@a0353000 { - compatible = "ste,mcde-dsi"; - reg = <0xa0353000 0x1000>; - vana-supply = <&ab8500_ldo_ana_reg>; - /* This DSI port only has the Low Power / Energy Save clock */ - clocks = <&prcmu_clk PRCMU_DSI2ESCCLK>; - clock-names = "lp"; - #address-cells = <1>; - #size-cells = <0>; - }; -}; diff --git a/dts/Bindings/display/ste,mcde.yaml b/dts/Bindings/display/ste,mcde.yaml new file mode 100644 index 0000000000..564ea845c8 --- /dev/null +++ b/dts/Bindings/display/ste,mcde.yaml @@ -0,0 +1,168 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/ste,mcde.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ST-Ericsson Multi Channel Display Engine MCDE + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +properties: + compatible: + const: ste,mcde + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + description: an array of the MCDE clocks + items: + - description: MCDECLK (main MCDE clock) + - description: LCDCLK (LCD clock) + - description: PLLDSI (HDMI clock) + + clock-names: + items: + - const: mcde + - const: lcd + - const: hdmi + + resets: + maxItems: 1 + + epod-supply: + description: a phandle to the EPOD regulator + + vana-supply: + description: a phandle to the analog voltage regulator + + port: + $ref: /schemas/graph.yaml#/properties/port + description: + A DPI port node + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: true + +patternProperties: + "^dsi@[0-9a-f]+$": + description: subnodes for the three DSI host adapters + type: object + $ref: dsi-controller.yaml# + + properties: + compatible: + const: ste,mcde-dsi + + reg: + maxItems: 1 + + vana-supply: + description: a phandle to the analog voltage regulator + + clocks: + description: phandles to the high speed and low power (energy save) clocks + the high speed clock is not present on the third (dsi2) block, so it + should only have the "lp" clock + minItems: 1 + maxItems: 2 + + clock-names: + oneOf: + - items: + - const: hs + - const: lp + - items: + - const: lp + + required: + - compatible + - reg + - vana-supply + - clocks + - clock-names + + unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - epod-supply + - vana-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/mfd/dbx500-prcmu.h> + #include <dt-bindings/gpio/gpio.h> + + mcde@a0350000 { + compatible = "ste,mcde"; + reg = <0xa0350000 0x1000>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + epod-supply = <&db8500_b2r2_mcde_reg>; + vana-supply = <&ab8500_ldo_ana_reg>; + clocks = <&prcmu_clk PRCMU_MCDECLK>, + <&prcmu_clk PRCMU_LCDCLK>, + <&prcmu_clk PRCMU_PLLDSI>; + clock-names = "mcde", "lcd", "hdmi"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dsi0: dsi@a0351000 { + compatible = "ste,mcde-dsi"; + reg = <0xa0351000 0x1000>; + vana-supply = <&ab8500_ldo_ana_reg>; + clocks = <&prcmu_clk PRCMU_DSI0CLK>, <&prcmu_clk PRCMU_DSI0ESCCLK>; + clock-names = "hs", "lp"; + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "samsung,s6d16d0"; + reg = <0>; + vdd1-supply = <&ab8500_ldo_aux1_reg>; + reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + }; + }; + + dsi1: dsi@a0352000 { + compatible = "ste,mcde-dsi"; + reg = <0xa0352000 0x1000>; + vana-supply = <&ab8500_ldo_ana_reg>; + clocks = <&prcmu_clk PRCMU_DSI1CLK>, <&prcmu_clk PRCMU_DSI1ESCCLK>; + clock-names = "hs", "lp"; + #address-cells = <1>; + #size-cells = <0>; + }; + + dsi2: dsi@a0353000 { + compatible = "ste,mcde-dsi"; + reg = <0xa0353000 0x1000>; + vana-supply = <&ab8500_ldo_ana_reg>; + /* This DSI port only has the Low Power / Energy Save clock */ + clocks = <&prcmu_clk PRCMU_DSI2ESCCLK>; + clock-names = "lp"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + +... diff --git a/dts/Bindings/display/tegra/nvidia,tegra114-mipi.txt b/dts/Bindings/display/tegra/nvidia,tegra114-mipi.txt deleted file mode 100644 index e4a25cedc5..0000000000 --- a/dts/Bindings/display/tegra/nvidia,tegra114-mipi.txt +++ /dev/null @@ -1,41 +0,0 @@ -NVIDIA Tegra MIPI pad calibration controller - -Required properties: -- compatible: "nvidia,tegra<chip>-mipi" -- reg: Physical base address and length of the controller's registers. -- clocks: Must contain an entry for each entry in clock-names. - See ../clocks/clock-bindings.txt for details. -- clock-names: Must include the following entries: - - mipi-cal -- #nvidia,mipi-calibrate-cells: Should be 1. The cell is a bitmask of the pads - that need to be calibrated for a given device. - -User nodes need to contain an nvidia,mipi-calibrate property that has a -phandle to refer to the calibration controller node and a bitmask of the pads -that need to be calibrated. - -Example: - - mipi: mipi@700e3000 { - compatible = "nvidia,tegra114-mipi"; - reg = <0x700e3000 0x100>; - clocks = <&tegra_car TEGRA114_CLK_MIPI_CAL>; - clock-names = "mipi-cal"; - #nvidia,mipi-calibrate-cells = <1>; - }; - - ... - - host1x@50000000 { - ... - - dsi@54300000 { - ... - - nvidia,mipi-calibrate = <&mipi 0x060>; - - ... - }; - - ... - }; diff --git a/dts/Bindings/display/tegra/nvidia,tegra114-mipi.yaml b/dts/Bindings/display/tegra/nvidia,tegra114-mipi.yaml new file mode 100644 index 0000000000..f448624dd7 --- /dev/null +++ b/dts/Bindings/display/tegra/nvidia,tegra114-mipi.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra114-mipi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra MIPI pad calibration controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + $nodename: + pattern: "^mipi@[0-9a-f]+$" + + compatible: + enum: + - nvidia,tegra114-mipi + - nvidia,tegra210-mipi + - nvidia,tegra186-mipi + + reg: + maxItems: 1 + + clocks: + items: + - description: module clock + + clock-names: + items: + - const: mipi-cal + + power-domains: + maxItems: 1 + + "#nvidia,mipi-calibrate-cells": + description: The number of cells in a MIPI calibration specifier. + Should be 1. The single cell specifies a bitmask of the pads that + need to be calibrated for a given device. + $ref: /schemas/types.yaml#/definitions/uint32 + const: 1 + +additionalProperties: false + +required: + - compatible + - reg + - clocks + - "#nvidia,mipi-calibrate-cells" + +examples: + - | + #include <dt-bindings/clock/tegra114-car.h> + + mipi@700e3000 { + compatible = "nvidia,tegra114-mipi"; + reg = <0x700e3000 0x100>; + clocks = <&tegra_car TEGRA114_CLK_MIPI_CAL>; + clock-names = "mipi-cal"; + #nvidia,mipi-calibrate-cells = <1>; + }; + + dsia: dsi@54300000 { + compatible = "nvidia,tegra114-dsi"; + reg = <0x54300000 0x00040000>; + clocks = <&tegra_car TEGRA114_CLK_DSIA>, + <&tegra_car TEGRA114_CLK_DSIALP>, + <&tegra_car TEGRA114_CLK_PLL_D_OUT0>; + clock-names = "dsi", "lp", "parent"; + resets = <&tegra_car 48>; + reset-names = "dsi"; + nvidia,mipi-calibrate = <&mipi 0x060>; /* DSIA & DSIB pads */ + }; diff --git a/dts/Bindings/display/tegra/nvidia,tegra124-dpaux.yaml b/dts/Bindings/display/tegra/nvidia,tegra124-dpaux.yaml new file mode 100644 index 0000000000..5cdbc527a5 --- /dev/null +++ b/dts/Bindings/display/tegra/nvidia,tegra124-dpaux.yaml @@ -0,0 +1,151 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra124-dpaux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra DisplayPort AUX Interface + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +description: | + The Tegra Display Port Auxiliary (DPAUX) pad controller manages two + pins which can be assigned to either the DPAUX channel or to an I2C + controller. + + When configured for DisplayPort AUX operation, the DPAUX controller + can also be used to communicate with a DisplayPort device using the + AUX channel. + +properties: + $nodename: + pattern: "^dpaux@[0-9a-f]+$" + + compatible: + oneOf: + - enum: + - nvidia,tegra124-dpaux + - nvidia,tegra210-dpaux + - nvidia,tegra186-dpaux + - nvidia,tegra194-dpaux + + - items: + - const: nvidia,tegra132-dpaux + - const: nvidia,tegra124-dpaux + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: clock input for the DPAUX hardware + - description: reference clock + + clock-names: + items: + - const: dpaux + - const: parent + + resets: + items: + - description: module reset + + reset-names: + items: + - const: dpaux + + power-domains: + maxItems: 1 + + i2c-bus: + description: Subnode where I2C slave devices are listed. This + subnode must be always present. If there are no I2C slave + devices, an empty node should be added. See ../../i2c/i2c.yaml + for more information. + type: object + + aux-bus: + $ref: /schemas/display/dp-aux-bus.yaml# + + vdd-supply: + description: phandle of a supply that powers the DisplayPort + link + +patternProperties: + "^pinmux-[a-z0-9]+$": + description: + Since only three configurations are possible, only three child + nodes are needed to describe the pin mux'ing options for the + DPAUX pads. Furthermore, given that the pad functions are only + applicable to a single set of pads, the child nodes only need + to describe the pad group the functions are being applied to + rather than the individual pads. + type: object + properties: + groups: + const: dpaux-io + + function: + enum: + - aux + - i2c + - off + + additionalProperties: false + + required: + - groups + - function + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - reset-names + +examples: + - | + #include <dt-bindings/clock/tegra210-car.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + dpaux: dpaux@545c0000 { + compatible = "nvidia,tegra210-dpaux"; + reg = <0x545c0000 0x00040000>; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_DPAUX>, + <&tegra_car TEGRA210_CLK_PLL_DP>; + clock-names = "dpaux", "parent"; + resets = <&tegra_car 181>; + reset-names = "dpaux"; + power-domains = <&pd_sor>; + + state_dpaux_aux: pinmux-aux { + groups = "dpaux-io"; + function = "aux"; + }; + + state_dpaux_i2c: pinmux-i2c { + groups = "dpaux-io"; + function = "i2c"; + }; + + state_dpaux_off: pinmux-off { + groups = "dpaux-io"; + function = "off"; + }; + + i2c-bus { + #address-cells = <1>; + #size-cells = <0>; + }; + }; diff --git a/dts/Bindings/display/tegra/nvidia,tegra124-sor.yaml b/dts/Bindings/display/tegra/nvidia,tegra124-sor.yaml new file mode 100644 index 0000000000..6f2e224719 --- /dev/null +++ b/dts/Bindings/display/tegra/nvidia,tegra124-sor.yaml @@ -0,0 +1,197 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra124-sor.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra SOR Output Encoder + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +description: | + The Serial Output Resource (SOR) can be used to drive HDMI, LVDS, eDP + and DP outputs. + +properties: + $nodename: + pattern: "^sor@[0-9a-f]+$" + + compatible: + oneOf: + - enum: + - nvidia,tegra124-sor + - nvidia,tegra210-sor + - nvidia,tegra210-sor1 + - nvidia,tegra186-sor + - nvidia,tegra186-sor1 + - nvidia,tegra194-sor + + - items: + - const: nvidia,tegra132-sor + - const: nvidia,tegra124-sor + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 5 + maxItems: 6 + + clock-names: + minItems: 5 + maxItems: 6 + + resets: + items: + - description: module reset + + reset-names: + items: + - const: sor + + power-domains: + maxItems: 1 + + avdd-io-hdmi-dp-supply: + description: I/O supply for HDMI/DP + + vdd-hdmi-dp-pll-supply: + description: PLL supply for HDMI/DP + + hdmi-supply: + description: +5.0V HDMI connector supply, required for HDMI + + # Tegra186 and later + nvidia,interface: + description: index of the SOR interface + $ref: /schemas/types.yaml#/definitions/uint32 + + nvidia,ddc-i2c-bus: + description: phandle of an I2C controller used for DDC EDID + probing + $ref: /schemas/types.yaml#/definitions/phandle + + nvidia,hpd-gpio: + description: specifies a GPIO used for hotplug detection + maxItems: 1 + + nvidia,edid: + description: supplies a binary EDID blob + $ref: /schemas/types.yaml#/definitions/uint8-array + + nvidia,panel: + description: phandle of a display panel, required for eDP + $ref: /schemas/types.yaml#/definitions/phandle + + nvidia,xbar-cfg: + description: 5 cells containing the crossbar configuration. + Each lane of the SOR, identified by the cell's index, is + mapped via the crossbar to the pad specified by the cell's + value. + $ref: /schemas/types.yaml#/definitions/uint32-array + + # optional when driving an eDP output + nvidia,dpaux: + description: phandle to a DisplayPort AUX interface + $ref: /schemas/types.yaml#/definitions/phandle + +allOf: + - if: + properties: + compatible: + contains: + enum: + - nvidia,tegra186-sor + - nvidia,tegra194-sor + then: + properties: + clocks: + items: + - description: clock input for the SOR hardware + - description: SOR output clock + - description: input for the pixel clock + - description: reference clock for the SOR clock + - description: safe reference clock for the SOR clock + during power up + - description: SOR pad output clock + + clock-names: + items: + - const: sor + - enum: + - source # deprecated + - out + - const: parent + - const: dp + - const: safe + - const: pad + else: + properties: + clocks: + items: + - description: clock input for the SOR hardware + - description: SOR output clock + - description: input for the pixel clock + - description: reference clock for the SOR clock + - description: safe reference clock for the SOR clock + during power up + + clock-names: + items: + - const: sor + - enum: + - source # deprecated + - out + - const: parent + - const: dp + - const: safe + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - reset-names + - avdd-io-hdmi-dp-supply + - vdd-hdmi-dp-pll-supply + +examples: + - | + #include <dt-bindings/clock/tegra210-car.h> + #include <dt-bindings/gpio/tegra-gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + sor0: sor@54540000 { + compatible = "nvidia,tegra210-sor"; + reg = <0x54540000 0x00040000>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_SOR0>, + <&tegra_car TEGRA210_CLK_SOR0_OUT>, + <&tegra_car TEGRA210_CLK_PLL_D_OUT0>, + <&tegra_car TEGRA210_CLK_PLL_DP>, + <&tegra_car TEGRA210_CLK_SOR_SAFE>; + clock-names = "sor", "out", "parent", "dp", "safe"; + resets = <&tegra_car 182>; + reset-names = "sor"; + pinctrl-0 = <&state_dpaux_aux>; + pinctrl-1 = <&state_dpaux_i2c>; + pinctrl-2 = <&state_dpaux_off>; + pinctrl-names = "aux", "i2c", "off"; + power-domains = <&pd_sor>; + + avdd-io-hdmi-dp-supply = <&avdd_1v05>; + vdd-hdmi-dp-pll-supply = <&vdd_1v8>; + hdmi-supply = <&vdd_hdmi>; + + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + nvidia,hpd-gpio = <&gpio TEGRA_GPIO(CC, 1) GPIO_ACTIVE_LOW>; + }; diff --git a/dts/Bindings/display/tegra/nvidia,tegra124-vic.yaml b/dts/Bindings/display/tegra/nvidia,tegra124-vic.yaml new file mode 100644 index 0000000000..7200095ef1 --- /dev/null +++ b/dts/Bindings/display/tegra/nvidia,tegra124-vic.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra124-vic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra Video Image Composer + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + $nodename: + pattern: "^vic@[0-9a-f]+$" + + compatible: + oneOf: + - enum: + - nvidia,tegra124-vic + - nvidia,tegra210-vic + - nvidia,tegra186-vic + - nvidia,tegra194-vic + - nvidia,tegra234-vic + + - items: + - const: nvidia,tegra132-vic + - const: nvidia,tegra124-vic + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: clock input for the VIC hardware + + clock-names: + items: + - const: vic + + resets: + items: + - description: module reset + + reset-names: + items: + - const: vic + + power-domains: + maxItems: 1 + + iommus: + maxItems: 1 + + interconnects: + description: Description of the interconnect paths for the VIC; + see ../interconnect/interconnect.txt for details. + items: + - description: memory read client for VIC + - description: memory write client for VIC + + interconnect-names: + items: + - const: dma-mem # read + - const: write + + dma-coherent: true + +additionalProperties: false diff --git a/dts/Bindings/display/tegra/nvidia,tegra186-dc.yaml b/dts/Bindings/display/tegra/nvidia,tegra186-dc.yaml new file mode 100644 index 0000000000..ce4589466a --- /dev/null +++ b/dts/Bindings/display/tegra/nvidia,tegra186-dc.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra186-dc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra186 (and later) Display Controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + $nodename: + pattern: "^display@[0-9a-f]+$" + + compatible: + enum: + - nvidia,tegra186-dc + - nvidia,tegra194-dc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: display controller pixel clock + + clock-names: + items: + - const: dc + + resets: + items: + - description: display controller reset + + reset-names: + items: + - const: dc + + power-domains: + maxItems: 1 + + iommus: + maxItems: 1 + + interconnects: + description: Description of the interconnect paths for the + display controller; see ../interconnect/interconnect.txt + for details. + + interconnect-names: + items: + - const: dma-mem # read-0 + - const: read-1 + + nvidia,outputs: + description: A list of phandles of outputs that this display + controller can drive. + $ref: /schemas/types.yaml#/definitions/phandle-array + + nvidia,head: + description: The number of the display controller head. This + is used to setup the various types of output to receive + video data from the given head. + $ref: /schemas/types.yaml#/definitions/uint32 + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - reset-names + - power-domains + - nvidia,outputs + - nvidia,head + +# see nvidia,tegra186-display.yaml for examples diff --git a/dts/Bindings/display/tegra/nvidia,tegra186-display.yaml b/dts/Bindings/display/tegra/nvidia,tegra186-display.yaml new file mode 100644 index 0000000000..117c371ce2 --- /dev/null +++ b/dts/Bindings/display/tegra/nvidia,tegra186-display.yaml @@ -0,0 +1,308 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra186-display.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra186 (and later) Display Hub + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + $nodename: + pattern: "^display-hub@[0-9a-f]+$" + + compatible: + enum: + - nvidia,tegra186-display + - nvidia,tegra194-display + + '#address-cells': + enum: [ 1, 2 ] + + '#size-cells': + enum: [ 1, 2 ] + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 2 + maxItems: 3 + + clock-names: + minItems: 2 + maxItems: 3 + + resets: + items: + - description: display hub reset + - description: window group 0 reset + - description: window group 1 reset + - description: window group 2 reset + - description: window group 3 reset + - description: window group 4 reset + - description: window group 5 reset + + reset-names: + items: + - const: misc + - const: wgrp0 + - const: wgrp1 + - const: wgrp2 + - const: wgrp3 + - const: wgrp4 + - const: wgrp5 + + power-domains: + maxItems: 1 + + ranges: + maxItems: 1 + +patternProperties: + "^display@[0-9a-f]+$": + type: object + +allOf: + - if: + properties: + compatible: + contains: + const: nvidia,tegra186-display + then: + properties: + clocks: + items: + - description: display core clock + - description: display stream compression clock + - description: display hub clock + + clock-names: + items: + - const: disp + - const: dsc + - const: hub + else: + properties: + clocks: + items: + - description: display core clock + - description: display hub clock + + clock-names: + items: + - const: disp + - const: hub + +additionalProperties: false + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - reset-names + - power-domains + - "#address-cells" + - "#size-cells" + - ranges + +examples: + - | + #include <dt-bindings/clock/tegra186-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/memory/tegra186-mc.h> + #include <dt-bindings/power/tegra186-powergate.h> + #include <dt-bindings/reset/tegra186-reset.h> + + display-hub@15200000 { + compatible = "nvidia,tegra186-display"; + reg = <0x15200000 0x00040000>; + resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_MISC>, + <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP0>, + <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP1>, + <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP2>, + <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP3>, + <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP4>, + <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP5>; + reset-names = "misc", "wgrp0", "wgrp1", "wgrp2", + "wgrp3", "wgrp4", "wgrp5"; + clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_DISP>, + <&bpmp TEGRA186_CLK_NVDISPLAY_DSC>, + <&bpmp TEGRA186_CLK_NVDISPLAYHUB>; + clock-names = "disp", "dsc", "hub"; + + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0x15200000 0x15200000 0x40000>; + + display@15200000 { + compatible = "nvidia,tegra186-dc"; + reg = <0x15200000 0x10000>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_P0>; + clock-names = "dc"; + resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_HEAD0>; + reset-names = "dc"; + + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>; + interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR &emc>, + <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR1 &emc>; + interconnect-names = "dma-mem", "read-1"; + iommus = <&smmu TEGRA186_SID_NVDISPLAY>; + + nvidia,outputs = <&dsia &dsib &sor0 &sor1>; + nvidia,head = <0>; + }; + + display@15210000 { + compatible = "nvidia,tegra186-dc"; + reg = <0x15210000 0x10000>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_P1>; + clock-names = "dc"; + resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_HEAD1>; + reset-names = "dc"; + + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISPB>; + interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR &emc>, + <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR1 &emc>; + interconnect-names = "dma-mem", "read-1"; + iommus = <&smmu TEGRA186_SID_NVDISPLAY>; + + nvidia,outputs = <&dsia &dsib &sor0 &sor1>; + nvidia,head = <1>; + }; + + display@15220000 { + compatible = "nvidia,tegra186-dc"; + reg = <0x15220000 0x10000>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_P2>; + clock-names = "dc"; + resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_HEAD2>; + reset-names = "dc"; + + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISPC>; + interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR &emc>, + <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR1 &emc>; + interconnect-names = "dma-mem", "read-1"; + iommus = <&smmu TEGRA186_SID_NVDISPLAY>; + + nvidia,outputs = <&sor0 &sor1>; + nvidia,head = <2>; + }; + }; + + - | + #include <dt-bindings/clock/tegra194-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/memory/tegra194-mc.h> + #include <dt-bindings/power/tegra194-powergate.h> + #include <dt-bindings/reset/tegra194-reset.h> + + display-hub@15200000 { + compatible = "nvidia,tegra194-display"; + reg = <0x15200000 0x00040000>; + resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_MISC>, + <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP0>, + <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP1>, + <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP2>, + <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP3>, + <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP4>, + <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP5>; + reset-names = "misc", "wgrp0", "wgrp1", "wgrp2", + "wgrp3", "wgrp4", "wgrp5"; + clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_DISP>, + <&bpmp TEGRA194_CLK_NVDISPLAYHUB>; + clock-names = "disp", "hub"; + + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0x15200000 0x15200000 0x40000>; + + display@15200000 { + compatible = "nvidia,tegra194-dc"; + reg = <0x15200000 0x10000>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_P0>; + clock-names = "dc"; + resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_HEAD0>; + reset-names = "dc"; + + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>; + interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>, + <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>; + interconnect-names = "dma-mem", "read-1"; + + nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>; + nvidia,head = <0>; + }; + + display@15210000 { + compatible = "nvidia,tegra194-dc"; + reg = <0x15210000 0x10000>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_P1>; + clock-names = "dc"; + resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_HEAD1>; + reset-names = "dc"; + + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISPB>; + interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>, + <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>; + interconnect-names = "dma-mem", "read-1"; + + nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>; + nvidia,head = <1>; + }; + + display@15220000 { + compatible = "nvidia,tegra194-dc"; + reg = <0x15220000 0x10000>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_P2>; + clock-names = "dc"; + resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_HEAD2>; + reset-names = "dc"; + + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISPC>; + interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>, + <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>; + interconnect-names = "dma-mem", "read-1"; + + nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>; + nvidia,head = <2>; + }; + + display@15230000 { + compatible = "nvidia,tegra194-dc"; + reg = <0x15230000 0x10000>; + interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_P3>; + clock-names = "dc"; + resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_HEAD3>; + reset-names = "dc"; + + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISPC>; + interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>, + <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>; + interconnect-names = "dma-mem", "read-1"; + + nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>; + nvidia,head = <3>; + }; + }; diff --git a/dts/Bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml b/dts/Bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml new file mode 100644 index 0000000000..da75b71e8e --- /dev/null +++ b/dts/Bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra186-dsi-padctl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra MIPI DSI pad controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + $nodename: + pattern: "^padctl@[0-9a-f]+$" + + compatible: + const: nvidia,tegra186-dsi-padctl + + reg: + maxItems: 1 + + resets: + items: + - description: module reset + + reset-names: + items: + - const: dsi + +allOf: + - $ref: /schemas/reset/reset.yaml + +additionalProperties: false + +examples: + - | + #include <dt-bindings/reset/tegra186-reset.h> + + padctl@15880000 { + compatible = "nvidia,tegra186-dsi-padctl"; + reg = <0x15880000 0x10000>; + resets = <&bpmp TEGRA186_RESET_DSI>; + reset-names = "dsi"; + }; diff --git a/dts/Bindings/display/tegra/nvidia,tegra20-dc.yaml b/dts/Bindings/display/tegra/nvidia,tegra20-dc.yaml new file mode 100644 index 0000000000..69be95afd5 --- /dev/null +++ b/dts/Bindings/display/tegra/nvidia,tegra20-dc.yaml @@ -0,0 +1,182 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-dc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra Display Controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + $nodename: + pattern: "^dc@[0-9a-f]+$" + + compatible: + oneOf: + - enum: + - nvidia,tegra20-dc + - nvidia,tegra30-dc + - nvidia,tegra114-dc + - nvidia,tegra124-dc + - nvidia,tegra210-dc + + - items: + - const: nvidia,tegra124-dc + - const: nvidia,tegra132-dc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + items: + - description: display controller pixel clock + - description: parent clock # optional + + clock-names: + minItems: 1 + items: + - const: dc + - const: parent # optional + + resets: + items: + - description: module reset + + reset-names: + items: + - const: dc + + interconnect-names: true + interconnects: true + + iommus: + maxItems: 1 + + operating-points-v2: true + + power-domains: + items: + - description: phandle to the core power domain + + memory-region: true + + nvidia,head: + $ref: /schemas/types.yaml#/definitions/uint32 + description: The number of the display controller head. This is used to setup the various + types of output to receive video data from the given head. + + nvidia,outputs: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: A list of phandles of outputs that this display controller can drive. + + rgb: + type: object + +allOf: + - if: + properties: + compatible: + contains: + enum: + - nvidia,tegra20-dc + - nvidia,tegra30-dc + - nvidia,tegra114-dc + then: + properties: + interconnects: + items: + - description: window A memory client + - description: window B memory client + - description: window B memory client (vertical filter) + - description: window C memory client + - description: cursor memory client + + interconnect-names: + items: + - const: wina + - const: winb + - const: winb-vfilter + - const: winc + - const: cursor + + rgb: + description: Each display controller node has a child node, named "rgb", that represents + the RGB output associated with the controller. + type: object + properties: + nvidia,ddc-i2c-bus: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle of an I2C controller used for DDC EDID probing + + nvidia,hpd-gpio: + description: specifies a GPIO used for hotplug detection + maxItems: 1 + + nvidia,edid: + $ref: /schemas/types.yaml#/definitions/uint8-array + description: supplies a binary EDID blob + + nvidia,panel: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle of a display panel + + - if: + properties: + compatible: + contains: + enum: + - nvidia,tegra124-dc + then: + properties: + interconnects: + minItems: 4 + items: + - description: window A memory client + - description: window B memory client + - description: window C memory client + - description: cursor memory client + - description: window D memory client + - description: window T memory client + + interconnect-names: + minItems: 4 + items: + - const: wina + - const: winb + - const: winc + - const: cursor + - const: wind + - const: wint + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - reset-names + +examples: + - | + #include <dt-bindings/clock/tegra20-car.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + dc@54200000 { + compatible = "nvidia,tegra20-dc"; + reg = <0x54200000 0x00040000>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA20_CLK_DISP1>; + clock-names = "dc"; + resets = <&tegra_car 27>; + reset-names = "dc"; + }; diff --git a/dts/Bindings/display/tegra/nvidia,tegra20-dsi.yaml b/dts/Bindings/display/tegra/nvidia,tegra20-dsi.yaml new file mode 100644 index 0000000000..59e1dc0813 --- /dev/null +++ b/dts/Bindings/display/tegra/nvidia,tegra20-dsi.yaml @@ -0,0 +1,158 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-dsi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra Display Serial Interface + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + compatible: + oneOf: + - enum: + - nvidia,tegra20-dsi + - nvidia,tegra30-dsi + - nvidia,tegra114-dsi + - nvidia,tegra124-dsi + - nvidia,tegra210-dsi + - nvidia,tegra186-dsi + + - items: + - const: nvidia,tegra132-dsi + - const: nvidia,tegra124-dsi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 2 + maxItems: 3 + + clock-names: + minItems: 2 + maxItems: 3 + + resets: + items: + - description: module reset + + reset-names: + items: + - const: dsi + + operating-points-v2: true + + power-domains: + maxItems: 1 + + avdd-dsi-csi-supply: + description: phandle of a supply that powers the DSI controller + + nvidia,mipi-calibrate: + description: Should contain a phandle and a specifier specifying + which pads are used by this DSI output and need to be + calibrated. See nvidia,tegra114-mipi.yaml for details. + $ref: /schemas/types.yaml#/definitions/phandle-array + + nvidia,ddc-i2c-bus: + description: phandle of an I2C controller used for DDC EDID + probing + $ref: /schemas/types.yaml#/definitions/phandle + + nvidia,hpd-gpio: + description: specifies a GPIO used for hotplug detection + maxItems: 1 + + nvidia,edid: + description: supplies a binary EDID blob + $ref: /schemas/types.yaml#/definitions/uint8-array + + nvidia,panel: + description: phandle of a display panel + $ref: /schemas/types.yaml#/definitions/phandle + + nvidia,ganged-mode: + description: contains a phandle to a second DSI controller to + gang up with in order to support up to 8 data lanes + $ref: /schemas/types.yaml#/definitions/phandle + +allOf: + - $ref: ../dsi-controller.yaml# + - if: + properties: + compatible: + contains: + enum: + - nvidia,tegra20-dsi + - nvidia,tegra30-dsi + then: + properties: + clocks: + items: + - description: DSI module clock + - description: input for the pixel clock + + clock-names: + items: + - const: dsi + - const: parent + else: + properties: + clocks: + items: + - description: DSI module clock + - description: low-power module clock + - description: input for the pixel clock + + clock-names: + items: + - const: dsi + - const: lp + - const: parent + + - if: + properties: + compatible: + contains: + const: nvidia,tegra186-dsi + then: + required: + - interrupts + +unevaluatedProperties: false + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - reset-names + +examples: + - | + #include <dt-bindings/clock/tegra186-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/tegra186-powergate.h> + #include <dt-bindings/reset/tegra186-reset.h> + + dsi@15300000 { + compatible = "nvidia,tegra186-dsi"; + reg = <0x15300000 0x10000>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA186_CLK_DSI>, + <&bpmp TEGRA186_CLK_DSIA_LP>, + <&bpmp TEGRA186_CLK_PLLD>; + clock-names = "dsi", "lp", "parent"; + resets = <&bpmp TEGRA186_RESET_DSI>; + reset-names = "dsi"; + + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>; + }; diff --git a/dts/Bindings/display/tegra/nvidia,tegra20-epp.yaml b/dts/Bindings/display/tegra/nvidia,tegra20-epp.yaml new file mode 100644 index 0000000000..3c095a5491 --- /dev/null +++ b/dts/Bindings/display/tegra/nvidia,tegra20-epp.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-epp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra Encoder Pre-Processor + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + $nodename: + pattern: "^epp@[0-9a-f]+$" + + compatible: + enum: + - nvidia,tegra20-epp + - nvidia,tegra30-epp + - nvidia,tegra114-epp + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + items: + - description: module reset + + reset-names: + items: + - const: epp + + iommus: + maxItems: 1 + + interconnects: + maxItems: 4 + + interconnect-names: + maxItems: 4 + + operating-points-v2: true + + power-domains: + items: + - description: phandle to the core power domain + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/tegra20-car.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + epp@540c0000 { + compatible = "nvidia,tegra20-epp"; + reg = <0x540c0000 0x00040000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA20_CLK_EPP>; + resets = <&tegra_car 19>; + reset-names = "epp"; + }; diff --git a/dts/Bindings/display/tegra/nvidia,tegra20-gr2d.yaml b/dts/Bindings/display/tegra/nvidia,tegra20-gr2d.yaml new file mode 100644 index 0000000000..1026b0bc3d --- /dev/null +++ b/dts/Bindings/display/tegra/nvidia,tegra20-gr2d.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-gr2d.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA 2D graphics engine + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + $nodename: + pattern: "^gr2d@[0-9a-f]+$" + + compatible: + enum: + - nvidia,tegra20-gr2d + - nvidia,tegra30-gr2d + - nvidia,tegra114-gr2d + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: module clock + + resets: + items: + - description: module reset + - description: memory client hotflush reset + + reset-names: + items: + - const: 2d + - const: mc + + iommus: + maxItems: 1 + + interconnects: + maxItems: 4 + + interconnect-names: + maxItems: 4 + + operating-points-v2: true + + power-domains: + items: + - description: phandle to the HEG or core power domain + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/tegra20-car.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/memory/tegra20-mc.h> + + gr2d@54140000 { + compatible = "nvidia,tegra20-gr2d"; + reg = <0x54140000 0x00040000>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA20_CLK_GR2D>; + resets = <&tegra_car 21>, <&mc TEGRA20_MC_RESET_2D>; + reset-names = "2d", "mc"; + }; diff --git a/dts/Bindings/display/tegra/nvidia,tegra20-gr3d.yaml b/dts/Bindings/display/tegra/nvidia,tegra20-gr3d.yaml new file mode 100644 index 0000000000..59a52e732c --- /dev/null +++ b/dts/Bindings/display/tegra/nvidia,tegra20-gr3d.yaml @@ -0,0 +1,213 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-gr3d.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA 3D graphics engine + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + $nodename: + pattern: "^gr3d@[0-9a-f]+$" + + compatible: + enum: + - nvidia,tegra20-gr3d + - nvidia,tegra30-gr3d + - nvidia,tegra114-gr3d + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + maxItems: 2 + + resets: + minItems: 2 + maxItems: 4 + + reset-names: + minItems: 2 + maxItems: 4 + + iommus: + minItems: 1 + maxItems: 2 + + interconnects: + minItems: 4 + maxItems: 10 + + interconnect-names: + minItems: 4 + maxItems: 10 + + operating-points-v2: true + + power-domains: + minItems: 1 + maxItems: 2 + + power-domain-names: + maxItems: 2 + +allOf: + - if: + properties: + compatible: + contains: + const: nvidia,tegra20-gr2d + then: + properties: + clocks: + items: + - description: module clock + + clock-names: + items: + - const: 3d + + resets: + items: + - description: module reset + - description: memory client hotflush reset + + reset-names: + items: + - const: 3d + - const: mc + + iommus: + maxItems: 1 + + interconnects: + minItems: 4 + maxItems: 4 + + interconnect-names: + minItems: 4 + maxItems: 4 + + power-domains: + items: + - description: phandle to the TD power domain + + - if: + properties: + compatible: + contains: + const: nvidia,tegra30-gr3d + then: + properties: + clocks: + items: + - description: primary module clock + - description: secondary module clock + + clock-names: + items: + - const: 3d + - const: 3d2 + + resets: + items: + - description: primary module reset + - description: secondary module reset + - description: primary memory client hotflush reset + - description: secondary memory client hotflush reset + + reset-names: + items: + - const: 3d + - const: 3d2 + - const: mc + - const: mc2 + + iommus: + minItems: 2 + maxItems: 2 + + interconnects: + minItems: 8 + maxItems: 8 + + interconnect-names: + minItems: 8 + maxItems: 8 + + power-domains: + items: + - description: phandle to the TD power domain + - description: phandle to the TD2 power domain + + power-domain-names: + items: + - const: 3d0 + - const: 3d1 + + dependencies: + power-domains: [ power-domain-names ] + + - if: + properties: + compatible: + contains: + const: nvidia,tegra114-gr2d + then: + properties: + clocks: + items: + - description: module clock + + clock-names: + items: + - const: 3d + + resets: + items: + - description: module reset + - description: memory client hotflush reset + + reset-names: + items: + - const: 3d + - const: mc + + iommus: + maxItems: 1 + + interconnects: + minItems: 10 + maxItems: 10 + + interconnect-names: + minItems: 10 + maxItems: 10 + + power-domains: + items: + - description: phandle to the TD power domain + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/tegra20-car.h> + #include <dt-bindings/memory/tegra20-mc.h> + + gr3d@54180000 { + compatible = "nvidia,tegra20-gr3d"; + reg = <0x54180000 0x00040000>; + clocks = <&tegra_car TEGRA20_CLK_GR3D>; + resets = <&tegra_car 24>, <&mc TEGRA20_MC_RESET_3D>; + reset-names = "3d", "mc"; + }; diff --git a/dts/Bindings/display/tegra/nvidia,tegra20-hdmi.yaml b/dts/Bindings/display/tegra/nvidia,tegra20-hdmi.yaml new file mode 100644 index 0000000000..f77197e486 --- /dev/null +++ b/dts/Bindings/display/tegra/nvidia,tegra20-hdmi.yaml @@ -0,0 +1,125 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-hdmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra HDMI Output Encoder + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + $nodename: + pattern: "^hdmi@[0-9a-f]+$" + + compatible: + oneOf: + - enum: + - nvidia,tegra20-hdmi + - nvidia,tegra30-hdmi + - nvidia,tegra114-hdmi + - nvidia,tegra124-hdmi + + - items: + - const: nvidia,tegra132-hdmi + - const: nvidia,tegra124-hdmi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: module clock + - description: parent clock + + clock-names: + items: + - const: hdmi + - const: parent + + resets: + items: + - description: module reset + + reset-names: + items: + - const: hdmi + + operating-points-v2: true + + power-domains: + items: + - description: phandle to the core power domain + + hdmi-supply: + description: supply for the +5V HDMI connector pin + + vdd-supply: + description: regulator for supply voltage + + pll-supply: + description: regulator for PLL + + nvidia,ddc-i2c-bus: + description: phandle of an I2C controller used for DDC EDID + probing + $ref: /schemas/types.yaml#/definitions/phandle + + nvidia,hpd-gpio: + description: specifies a GPIO used for hotplug detection + maxItems: 1 + + nvidia,edid: + description: supplies a binary EDID blob + $ref: /schemas/types.yaml#/definitions/uint8-array + + nvidia,panel: + description: phandle of a display panel + $ref: /schemas/types.yaml#/definitions/phandle + + "#sound-dai-cells": + const: 0 + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - reset-names + - pll-supply + - vdd-supply + - nvidia,ddc-i2c-bus + - nvidia,hpd-gpio + +examples: + - | + #include <dt-bindings/clock/tegra124-car.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/gpio/tegra-gpio.h> + + hdmi@54280000 { + compatible = "nvidia,tegra124-hdmi"; + reg = <0x54280000 0x00040000>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_HDMI>, + <&tegra_car TEGRA124_CLK_PLL_D2_OUT0>; + clock-names = "hdmi", "parent"; + resets = <&tegra_car 51>; + reset-names = "hdmi"; + + hdmi-supply = <&vdd_5v0_hdmi>; + pll-supply = <&vdd_hdmi_pll>; + vdd-supply = <&vdd_3v3_hdmi>; + + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; + }; diff --git a/dts/Bindings/display/tegra/nvidia,tegra20-host1x.txt b/dts/Bindings/display/tegra/nvidia,tegra20-host1x.txt deleted file mode 100644 index 9999255ac5..0000000000 --- a/dts/Bindings/display/tegra/nvidia,tegra20-host1x.txt +++ /dev/null @@ -1,419 +0,0 @@ -NVIDIA Tegra host1x - -Required properties: -- compatible: "nvidia,tegra<chip>-host1x" -- reg: Physical base address and length of the controller's registers. - For pre-Tegra186, one entry describing the whole register area. - For Tegra186, one entry for each entry in reg-names: - "vm" - VM region assigned to Linux - "hypervisor" - Hypervisor region (only if Linux acts as hypervisor) -- interrupts: The interrupt outputs from the controller. -- #address-cells: The number of cells used to represent physical base addresses - in the host1x address space. Should be 1. -- #size-cells: The number of cells used to represent the size of an address - range in the host1x address space. Should be 1. -- ranges: The mapping of the host1x address space to the CPU address space. -- clocks: Must contain one entry, for the module clock. - See ../clocks/clock-bindings.txt for details. -- resets: Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names: Must include the following entries: - - host1x - -The host1x top-level node defines a number of children, each representing one -of the following host1x client modules: - -- mpe: video encoder - - Required properties: - - compatible: "nvidia,tegra<chip>-mpe" - - reg: Physical base address and length of the controller's registers. - - interrupts: The interrupt outputs from the controller. - - clocks: Must contain one entry, for the module clock. - See ../clocks/clock-bindings.txt for details. - - resets: Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. - - reset-names: Must include the following entries: - - mpe - -- vi: video input - - Required properties: - - compatible: "nvidia,tegra<chip>-vi" - - reg: Physical base address and length of the controller's registers. - - interrupts: The interrupt outputs from the controller. - - clocks: Must contain one entry, for the module clock. - See ../clocks/clock-bindings.txt for details. - - resets: Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. - - reset-names: Must include the following entries: - - vi - -- epp: encoder pre-processor - - Required properties: - - compatible: "nvidia,tegra<chip>-epp" - - reg: Physical base address and length of the controller's registers. - - interrupts: The interrupt outputs from the controller. - - clocks: Must contain one entry, for the module clock. - See ../clocks/clock-bindings.txt for details. - - resets: Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. - - reset-names: Must include the following entries: - - epp - -- isp: image signal processor - - Required properties: - - compatible: "nvidia,tegra<chip>-isp" - - reg: Physical base address and length of the controller's registers. - - interrupts: The interrupt outputs from the controller. - - clocks: Must contain one entry, for the module clock. - See ../clocks/clock-bindings.txt for details. - - resets: Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. - - reset-names: Must include the following entries: - - isp - -- gr2d: 2D graphics engine - - Required properties: - - compatible: "nvidia,tegra<chip>-gr2d" - - reg: Physical base address and length of the controller's registers. - - interrupts: The interrupt outputs from the controller. - - clocks: Must contain one entry, for the module clock. - See ../clocks/clock-bindings.txt for details. - - resets: Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. - - reset-names: Must include the following entries: - - 2d - -- gr3d: 3D graphics engine - - Required properties: - - compatible: "nvidia,tegra<chip>-gr3d" - - reg: Physical base address and length of the controller's registers. - - clocks: Must contain an entry for each entry in clock-names. - See ../clocks/clock-bindings.txt for details. - - clock-names: Must include the following entries: - (This property may be omitted if the only clock in the list is "3d") - - 3d - This MUST be the first entry. - - 3d2 (Only required on SoCs with two 3D clocks) - - resets: Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. - - reset-names: Must include the following entries: - - 3d - - 3d2 (Only required on SoCs with two 3D clocks) - -- dc: display controller - - Required properties: - - compatible: "nvidia,tegra<chip>-dc" - - reg: Physical base address and length of the controller's registers. - - interrupts: The interrupt outputs from the controller. - - clocks: Must contain an entry for each entry in clock-names. - See ../clocks/clock-bindings.txt for details. - - clock-names: Must include the following entries: - - dc - This MUST be the first entry. - - parent - - resets: Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. - - reset-names: Must include the following entries: - - dc - - nvidia,head: The number of the display controller head. This is used to - setup the various types of output to receive video data from the given - head. - - Each display controller node has a child node, named "rgb", that represents - the RGB output associated with the controller. It can take the following - optional properties: - - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing - - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection - - nvidia,edid: supplies a binary EDID blob - - nvidia,panel: phandle of a display panel - -- hdmi: High Definition Multimedia Interface - - Required properties: - - compatible: "nvidia,tegra<chip>-hdmi" - - reg: Physical base address and length of the controller's registers. - - interrupts: The interrupt outputs from the controller. - - hdmi-supply: supply for the +5V HDMI connector pin - - vdd-supply: regulator for supply voltage - - pll-supply: regulator for PLL - - clocks: Must contain an entry for each entry in clock-names. - See ../clocks/clock-bindings.txt for details. - - clock-names: Must include the following entries: - - hdmi - This MUST be the first entry. - - parent - - resets: Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. - - reset-names: Must include the following entries: - - hdmi - - Optional properties: - - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing - - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection - - nvidia,edid: supplies a binary EDID blob - - nvidia,panel: phandle of a display panel - -- tvo: TV encoder output - - Required properties: - - compatible: "nvidia,tegra<chip>-tvo" - - reg: Physical base address and length of the controller's registers. - - interrupts: The interrupt outputs from the controller. - - clocks: Must contain one entry, for the module clock. - See ../clocks/clock-bindings.txt for details. - -- dsi: display serial interface - - Required properties: - - compatible: "nvidia,tegra<chip>-dsi" - - reg: Physical base address and length of the controller's registers. - - clocks: Must contain an entry for each entry in clock-names. - See ../clocks/clock-bindings.txt for details. - - clock-names: Must include the following entries: - - dsi - This MUST be the first entry. - - lp - - parent - - resets: Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. - - reset-names: Must include the following entries: - - dsi - - avdd-dsi-supply: phandle of a supply that powers the DSI controller - - nvidia,mipi-calibrate: Should contain a phandle and a specifier specifying - which pads are used by this DSI output and need to be calibrated. See also - ../display/tegra/nvidia,tegra114-mipi.txt. - - Optional properties: - - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing - - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection - - nvidia,edid: supplies a binary EDID blob - - nvidia,panel: phandle of a display panel - - nvidia,ganged-mode: contains a phandle to a second DSI controller to gang - up with in order to support up to 8 data lanes - -- sor: serial output resource - - Required properties: - - compatible: Should be: - - "nvidia,tegra124-sor": for Tegra124 and Tegra132 - - "nvidia,tegra132-sor": for Tegra132 - - "nvidia,tegra210-sor": for Tegra210 - - "nvidia,tegra210-sor1": for Tegra210 - - "nvidia,tegra186-sor": for Tegra186 - - "nvidia,tegra186-sor1": for Tegra186 - - reg: Physical base address and length of the controller's registers. - - interrupts: The interrupt outputs from the controller. - - clocks: Must contain an entry for each entry in clock-names. - See ../clocks/clock-bindings.txt for details. - - clock-names: Must include the following entries: - - sor: clock input for the SOR hardware - - out: SOR output clock - - parent: input for the pixel clock - - dp: reference clock for the SOR clock - - safe: safe reference for the SOR clock during power up - - For Tegra186 and later: - - pad: SOR pad output clock (on Tegra186 and later) - - Obsolete: - - source: source clock for the SOR clock (obsolete, use "out" instead) - - - resets: Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. - - reset-names: Must include the following entries: - - sor - - Required properties on Tegra186 and later: - - nvidia,interface: index of the SOR interface - - Optional properties: - - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing - - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection - - nvidia,edid: supplies a binary EDID blob - - nvidia,panel: phandle of a display panel - - nvidia,xbar-cfg: 5 cells containing the crossbar configuration. Each lane - of the SOR, identified by the cell's index, is mapped via the crossbar to - the pad specified by the cell's value. - - Optional properties when driving an eDP output: - - nvidia,dpaux: phandle to a DispayPort AUX interface - -- dpaux: DisplayPort AUX interface - - compatible : Should contain one of the following: - - "nvidia,tegra124-dpaux": for Tegra124 and Tegra132 - - "nvidia,tegra210-dpaux": for Tegra210 - - reg: Physical base address and length of the controller's registers. - - interrupts: The interrupt outputs from the controller. - - clocks: Must contain an entry for each entry in clock-names. - See ../clocks/clock-bindings.txt for details. - - clock-names: Must include the following entries: - - dpaux: clock input for the DPAUX hardware - - parent: reference clock - - resets: Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. - - reset-names: Must include the following entries: - - dpaux - - vdd-supply: phandle of a supply that powers the DisplayPort link - - i2c-bus: Subnode where I2C slave devices are listed. This subnode - must be always present. If there are no I2C slave devices, an empty - node should be added. See ../../i2c/i2c.txt for more information. - - See ../pinctrl/nvidia,tegra124-dpaux-padctl.txt for information - regarding the DPAUX pad controller bindings. - -- vic: Video Image Compositor - - compatible : "nvidia,tegra<chip>-vic" - - reg: Physical base address and length of the controller's registers. - - interrupts: The interrupt outputs from the controller. - - clocks: Must contain an entry for each entry in clock-names. - See ../clocks/clock-bindings.txt for details. - - clock-names: Must include the following entries: - - vic: clock input for the VIC hardware - - resets: Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. - - reset-names: Must include the following entries: - - vic - -Example: - -/ { - ... - - host1x { - compatible = "nvidia,tegra20-host1x", "simple-bus"; - reg = <0x50000000 0x00024000>; - interrupts = <0 65 0x04 /* mpcore syncpt */ - 0 67 0x04>; /* mpcore general */ - clocks = <&tegra_car TEGRA20_CLK_HOST1X>; - resets = <&tegra_car 28>; - reset-names = "host1x"; - - #address-cells = <1>; - #size-cells = <1>; - - ranges = <0x54000000 0x54000000 0x04000000>; - - mpe { - compatible = "nvidia,tegra20-mpe"; - reg = <0x54040000 0x00040000>; - interrupts = <0 68 0x04>; - clocks = <&tegra_car TEGRA20_CLK_MPE>; - resets = <&tegra_car 60>; - reset-names = "mpe"; - }; - - vi { - compatible = "nvidia,tegra20-vi"; - reg = <0x54080000 0x00040000>; - interrupts = <0 69 0x04>; - clocks = <&tegra_car TEGRA20_CLK_VI>; - resets = <&tegra_car 100>; - reset-names = "vi"; - }; - - epp { - compatible = "nvidia,tegra20-epp"; - reg = <0x540c0000 0x00040000>; - interrupts = <0 70 0x04>; - clocks = <&tegra_car TEGRA20_CLK_EPP>; - resets = <&tegra_car 19>; - reset-names = "epp"; - }; - - isp { - compatible = "nvidia,tegra20-isp"; - reg = <0x54100000 0x00040000>; - interrupts = <0 71 0x04>; - clocks = <&tegra_car TEGRA20_CLK_ISP>; - resets = <&tegra_car 23>; - reset-names = "isp"; - }; - - gr2d { - compatible = "nvidia,tegra20-gr2d"; - reg = <0x54140000 0x00040000>; - interrupts = <0 72 0x04>; - clocks = <&tegra_car TEGRA20_CLK_GR2D>; - resets = <&tegra_car 21>; - reset-names = "2d"; - }; - - gr3d { - compatible = "nvidia,tegra20-gr3d"; - reg = <0x54180000 0x00040000>; - clocks = <&tegra_car TEGRA20_CLK_GR3D>; - resets = <&tegra_car 24>; - reset-names = "3d"; - }; - - dc@54200000 { - compatible = "nvidia,tegra20-dc"; - reg = <0x54200000 0x00040000>; - interrupts = <0 73 0x04>; - clocks = <&tegra_car TEGRA20_CLK_DISP1>, - <&tegra_car TEGRA20_CLK_PLL_P>; - clock-names = "dc", "parent"; - resets = <&tegra_car 27>; - reset-names = "dc"; - - rgb { - status = "disabled"; - }; - }; - - dc@54240000 { - compatible = "nvidia,tegra20-dc"; - reg = <0x54240000 0x00040000>; - interrupts = <0 74 0x04>; - clocks = <&tegra_car TEGRA20_CLK_DISP2>, - <&tegra_car TEGRA20_CLK_PLL_P>; - clock-names = "dc", "parent"; - resets = <&tegra_car 26>; - reset-names = "dc"; - - rgb { - status = "disabled"; - }; - }; - - hdmi { - compatible = "nvidia,tegra20-hdmi"; - reg = <0x54280000 0x00040000>; - interrupts = <0 75 0x04>; - clocks = <&tegra_car TEGRA20_CLK_HDMI>, - <&tegra_car TEGRA20_CLK_PLL_D_OUT0>; - clock-names = "hdmi", "parent"; - resets = <&tegra_car 51>; - reset-names = "hdmi"; - status = "disabled"; - }; - - tvo { - compatible = "nvidia,tegra20-tvo"; - reg = <0x542c0000 0x00040000>; - interrupts = <0 76 0x04>; - clocks = <&tegra_car TEGRA20_CLK_TVO>; - status = "disabled"; - }; - - dsi { - compatible = "nvidia,tegra20-dsi"; - reg = <0x54300000 0x00040000>; - clocks = <&tegra_car TEGRA20_CLK_DSI>, - <&tegra_car TEGRA20_CLK_PLL_D_OUT0>; - clock-names = "dsi", "parent"; - resets = <&tegra_car 48>; - reset-names = "dsi"; - status = "disabled"; - }; - }; - - ... -}; diff --git a/dts/Bindings/display/tegra/nvidia,tegra20-host1x.yaml b/dts/Bindings/display/tegra/nvidia,tegra20-host1x.yaml new file mode 100644 index 0000000000..94c5242c03 --- /dev/null +++ b/dts/Bindings/display/tegra/nvidia,tegra20-host1x.yaml @@ -0,0 +1,430 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-host1x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra host1x controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +description: The host1x top-level node defines a number of children, each + representing one of the host1x client modules defined in this binding. + +properties: + compatible: + oneOf: + - enum: + - nvidia,tegra20-host1x + - nvidia,tegra30-host1x + - nvidia,tegra114-host1x + - nvidia,tegra124-host1x + - nvidia,tegra210-host1x + - nvidia,tegra186-host1x + - nvidia,tegra194-host1x + - nvidia,tegra234-host1x + + - items: + - const: nvidia,tegra132-host1x + - const: nvidia,tegra124-host1x + + reg: + minItems: 1 + maxItems: 3 + + reg-names: + minItems: 1 + maxItems: 3 + + interrupts: + minItems: 1 + maxItems: 9 + + interrupt-names: + minItems: 1 + maxItems: 9 + + '#address-cells': + description: The number of cells used to represent physical base addresses + in the host1x address space. + enum: [1, 2] + + '#size-cells': + description: The number of cells used to represent the size of an address + range in the host1x address space. + enum: [1, 2] + + ranges: + maxItems: 1 + + clocks: + description: Must contain one entry, for the module clock. See + ../clocks/clock-bindings.txt for details. + + clock-names: + items: + - const: host1x + + resets: + minItems: 1 # MC reset is optional on Tegra186 and later + items: + - description: module reset + - description: memory client hotflush reset + + reset-names: + minItems: 1 # MC reset is optional on Tegra186 and later + items: + - const: host1x + - const: mc + + iommus: + maxItems: 1 + + interconnects: + items: + - description: memory read client for host1x + + interconnect-names: + items: + - const: dma-mem # read + + operating-points-v2: true + + power-domains: + items: + - description: phandle to the HEG or core power domain + +required: + - compatible + - interrupts + - interrupt-names + - '#address-cells' + - '#size-cells' + - ranges + - reg + - clocks + - clock-names + +unevaluatedProperties: + type: object + +allOf: + - if: + properties: + compatible: + contains: + enum: + - nvidia,tegra20-host1x + - nvidia,tegra30-host1x + - nvidia,tegra114-host1x + - nvidia,tegra124-host1x + - nvidia,tegra210-host1x + then: + properties: + interrupts: + items: + - description: host1x syncpoint interrupt + - description: host1x general interrupt + + interrupt-names: + items: + - const: syncpt + - const: host1x + required: + - resets + - reset-names + - if: + properties: + compatible: + contains: + enum: + - nvidia,tegra186-host1x + - nvidia,tegra194-host1x + then: + properties: + reg-names: + items: + - const: hypervisor + - const: vm + + reg: + items: + - description: region used by the hypervisor + - description: region assigned to the virtual machine + + resets: + maxItems: 1 + + reset-names: + maxItems: 1 + + interrupts: + items: + - description: host1x syncpoint interrupt + - description: host1x general interrupt + + interrupt-names: + items: + - const: syncpt + - const: host1x + + iommu-map: + description: Specification of stream IDs available for memory context device + use. Should be a mapping of IDs 0..n to IOMMU entries corresponding to + usable stream IDs. + + required: + - reg-names + - if: + properties: + compatible: + contains: + enum: + - nvidia,tegra234-host1x + then: + properties: + reg-names: + items: + - const: common + - const: hypervisor + - const: vm + + reg: + items: + - description: region used by host1x server + - description: region used by the hypervisor + - description: region assigned to the virtual machine + + interrupts: + items: + - description: host1x syncpoint interrupt 0 + - description: host1x syncpoint interrupt 1 + - description: host1x syncpoint interrupt 2 + - description: host1x syncpoint interrupt 3 + - description: host1x syncpoint interrupt 4 + - description: host1x syncpoint interrupt 5 + - description: host1x syncpoint interrupt 6 + - description: host1x syncpoint interrupt 7 + - description: host1x general interrupt + + interrupt-names: + items: + - const: syncpt0 + - const: syncpt1 + - const: syncpt2 + - const: syncpt3 + - const: syncpt4 + - const: syncpt5 + - const: syncpt6 + - const: syncpt7 + - const: host1x + + iommu-map: + description: Specification of stream IDs available for memory context device + use. Should be a mapping of IDs 0..n to IOMMU entries corresponding to + usable stream IDs. + + required: + - reg-names + +examples: + - | + #include <dt-bindings/clock/tegra20-car.h> + #include <dt-bindings/gpio/tegra-gpio.h> + #include <dt-bindings/memory/tegra20-mc.h> + + host1x@50000000 { + compatible = "nvidia,tegra20-host1x"; + reg = <0x50000000 0x00024000>; + interrupts = <0 65 0x04>, /* mpcore syncpt */ + <0 67 0x04>; /* mpcore general */ + interrupt-names = "syncpt", "host1x"; + clocks = <&tegra_car TEGRA20_CLK_HOST1X>; + clock-names = "host1x"; + resets = <&tegra_car 28>, <&mc TEGRA20_MC_RESET_HC>; + reset-names = "host1x", "mc"; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0x54000000 0x54000000 0x04000000>; + + mpe@54040000 { + compatible = "nvidia,tegra20-mpe"; + reg = <0x54040000 0x00040000>; + interrupts = <0 68 0x04>; + clocks = <&tegra_car TEGRA20_CLK_MPE>; + resets = <&tegra_car 60>; + reset-names = "mpe"; + }; + + vi@54080000 { + compatible = "nvidia,tegra20-vi"; + reg = <0x54080000 0x00040000>; + interrupts = <0 69 0x04>; + clocks = <&tegra_car TEGRA20_CLK_VI>; + resets = <&tegra_car 100>; + reset-names = "vi"; + }; + + epp@540c0000 { + compatible = "nvidia,tegra20-epp"; + reg = <0x540c0000 0x00040000>; + interrupts = <0 70 0x04>; + clocks = <&tegra_car TEGRA20_CLK_EPP>; + resets = <&tegra_car 19>; + reset-names = "epp"; + }; + + isp@54100000 { + compatible = "nvidia,tegra20-isp"; + reg = <0x54100000 0x00040000>; + interrupts = <0 71 0x04>; + clocks = <&tegra_car TEGRA20_CLK_ISP>; + resets = <&tegra_car 23>; + reset-names = "isp"; + }; + + gr2d@54140000 { + compatible = "nvidia,tegra20-gr2d"; + reg = <0x54140000 0x00040000>; + interrupts = <0 72 0x04>; + clocks = <&tegra_car TEGRA20_CLK_GR2D>; + resets = <&tegra_car 21>, <&mc TEGRA20_MC_RESET_2D>; + reset-names = "2d", "mc"; + }; + + gr3d@54180000 { + compatible = "nvidia,tegra20-gr3d"; + reg = <0x54180000 0x00040000>; + clocks = <&tegra_car TEGRA20_CLK_GR3D>; + resets = <&tegra_car 24>, <&mc TEGRA20_MC_RESET_3D>; + reset-names = "3d", "mc"; + }; + + dc@54200000 { + compatible = "nvidia,tegra20-dc"; + reg = <0x54200000 0x00040000>; + interrupts = <0 73 0x04>; + clocks = <&tegra_car TEGRA20_CLK_DISP1>; + clock-names = "dc"; + resets = <&tegra_car 27>; + reset-names = "dc"; + + rgb { + }; + }; + + dc@54240000 { + compatible = "nvidia,tegra20-dc"; + reg = <0x54240000 0x00040000>; + interrupts = <0 74 0x04>; + clocks = <&tegra_car TEGRA20_CLK_DISP2>; + clock-names = "dc"; + resets = <&tegra_car 26>; + reset-names = "dc"; + + rgb { + }; + }; + + hdmi@54280000 { + compatible = "nvidia,tegra20-hdmi"; + reg = <0x54280000 0x00040000>; + interrupts = <0 75 0x04>; + clocks = <&tegra_car TEGRA20_CLK_HDMI>, + <&tegra_car TEGRA20_CLK_PLL_D_OUT0>; + clock-names = "hdmi", "parent"; + resets = <&tegra_car 51>; + reset-names = "hdmi"; + + hdmi-supply = <&vdd_5v0_hdmi>; + pll-supply = <&vdd_hdmi_pll>; + vdd-supply = <&vdd_3v3_hdmi>; + + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; + }; + + tvo@542c0000 { + compatible = "nvidia,tegra20-tvo"; + reg = <0x542c0000 0x00040000>; + interrupts = <0 76 0x04>; + clocks = <&tegra_car TEGRA20_CLK_TVO>; + }; + + dsi@54300000 { + compatible = "nvidia,tegra20-dsi"; + reg = <0x54300000 0x00040000>; + clocks = <&tegra_car TEGRA20_CLK_DSI>, + <&tegra_car TEGRA20_CLK_PLL_D_OUT0>; + clock-names = "dsi", "parent"; + resets = <&tegra_car 48>; + reset-names = "dsi"; + }; + }; + + - | + #include <dt-bindings/clock/tegra210-car.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/memory/tegra210-mc.h> + + host1x@50000000 { + compatible = "nvidia,tegra210-host1x"; + reg = <0x50000000 0x00024000>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, /* mpcore syncpt */ + <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* mpcore general */ + interrupt-names = "syncpt", "host1x"; + clocks = <&tegra_car TEGRA210_CLK_HOST1X>; + clock-names = "host1x"; + resets = <&tegra_car 28>; + reset-names = "host1x"; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0x54000000 0x54000000 0x01000000>; + iommus = <&mc TEGRA_SWGROUP_HC>; + + vi@54080000 { + compatible = "nvidia,tegra210-vi"; + reg = <0x54080000 0x00000700>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + assigned-clocks = <&tegra_car TEGRA210_CLK_VI>; + assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>; + + clocks = <&tegra_car TEGRA210_CLK_VI>; + power-domains = <&pd_venc>; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0x0 0x54080000 0x2000>; + + csi@838 { + compatible = "nvidia,tegra210-csi"; + reg = <0x838 0x1300>; + assigned-clocks = <&tegra_car TEGRA210_CLK_CILAB>, + <&tegra_car TEGRA210_CLK_CILCD>, + <&tegra_car TEGRA210_CLK_CILE>, + <&tegra_car TEGRA210_CLK_CSI_TPG>; + assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_P>, + <&tegra_car TEGRA210_CLK_PLL_P>, + <&tegra_car TEGRA210_CLK_PLL_P>; + assigned-clock-rates = <102000000>, + <102000000>, + <102000000>, + <972000000>; + + clocks = <&tegra_car TEGRA210_CLK_CSI>, + <&tegra_car TEGRA210_CLK_CILAB>, + <&tegra_car TEGRA210_CLK_CILCD>, + <&tegra_car TEGRA210_CLK_CILE>, + <&tegra_car TEGRA210_CLK_CSI_TPG>; + clock-names = "csi", "cilab", "cilcd", "cile", "csi_tpg"; + power-domains = <&pd_sor>; + }; + }; + }; diff --git a/dts/Bindings/display/tegra/nvidia,tegra20-isp.yaml b/dts/Bindings/display/tegra/nvidia,tegra20-isp.yaml new file mode 100644 index 0000000000..3bc3b22e98 --- /dev/null +++ b/dts/Bindings/display/tegra/nvidia,tegra20-isp.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-isp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra ISP processor + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + compatible: + enum: + - nvidia,tegra20-isp + - nvidia,tegra30-isp + - nvidia,tegra210-isp + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: module clock + + resets: + items: + - description: module reset + + reset-names: + items: + - const: isp + + iommus: + maxItems: 1 + + interconnects: + items: + - description: memory write client + + interconnect-names: + items: + - const: dma-mem # write + + power-domains: + items: + - description: phandle to the VENC or core power domain + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/tegra20-car.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + isp@54100000 { + compatible = "nvidia,tegra20-isp"; + reg = <0x54100000 0x00040000>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA20_CLK_ISP>; + resets = <&tegra_car 23>; + reset-names = "isp"; + }; diff --git a/dts/Bindings/display/tegra/nvidia,tegra20-mpe.yaml b/dts/Bindings/display/tegra/nvidia,tegra20-mpe.yaml new file mode 100644 index 0000000000..2cd3e60cd0 --- /dev/null +++ b/dts/Bindings/display/tegra/nvidia,tegra20-mpe.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-mpe.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra Video Encoder + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + $nodename: + pattern: "^mpe@[0-9a-f]+$" + + compatible: + enum: + - nvidia,tegra20-mpe + - nvidia,tegra30-mpe + - nvidia,tegra114-mpe + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: module clock + + resets: + items: + - description: module reset + + reset-names: + items: + - const: mpe + + iommus: + maxItems: 1 + + interconnects: + maxItems: 6 + + interconnect-names: + maxItems: 6 + + operating-points-v2: true + + power-domains: + items: + - description: phandle to the MPE power domain + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/tegra20-car.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + mpe@54040000 { + compatible = "nvidia,tegra20-mpe"; + reg = <0x54040000 0x00040000>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA20_CLK_MPE>; + resets = <&tegra_car 60>; + reset-names = "mpe"; + }; diff --git a/dts/Bindings/display/tegra/nvidia,tegra20-tvo.yaml b/dts/Bindings/display/tegra/nvidia,tegra20-tvo.yaml new file mode 100644 index 0000000000..6c84d8b7eb --- /dev/null +++ b/dts/Bindings/display/tegra/nvidia,tegra20-tvo.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-tvo.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra TV Encoder Output + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + $nodename: + pattern: "^tvo@[0-9a-f]+$" + + compatible: + enum: + - nvidia,tegra20-tvo + - nvidia,tegra30-tvo + - nvidia,tegra114-tvo + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: module clock + + operating-points-v2: true + + power-domains: + items: + - description: phandle to the core power domain + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + +examples: + - | + #include <dt-bindings/clock/tegra20-car.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + tvo@542c0000 { + compatible = "nvidia,tegra20-tvo"; + reg = <0x542c0000 0x00040000>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA20_CLK_TVO>; + }; diff --git a/dts/Bindings/display/tegra/nvidia,tegra20-vi.yaml b/dts/Bindings/display/tegra/nvidia,tegra20-vi.yaml new file mode 100644 index 0000000000..2181855a09 --- /dev/null +++ b/dts/Bindings/display/tegra/nvidia,tegra20-vi.yaml @@ -0,0 +1,221 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-vi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra Video Input controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + $nodename: + pattern: "^vi@[0-9a-f]+$" + + compatible: + oneOf: + - const: nvidia,tegra20-vi + - const: nvidia,tegra30-vi + - const: nvidia,tegra114-vi + - const: nvidia,tegra124-vi + - items: + - const: nvidia,tegra132-vi + - const: nvidia,tegra124-vi + - const: nvidia,tegra210-vi + - const: nvidia,tegra186-vi + - const: nvidia,tegra194-vi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + items: + - description: module reset + + reset-names: + items: + - const: vi + + iommus: + maxItems: 1 + + interconnects: + minItems: 4 + maxItems: 5 + + interconnect-names: + minItems: 4 + maxItems: 5 + + operating-points-v2: true + + power-domains: + items: + - description: phandle to the VENC power domain + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: + maxItems: 1 + + avdd-dsi-csi-supply: + description: DSI/CSI power supply. Must supply 1.2 V. + + vip: + $ref: /schemas/display/tegra/nvidia,tegra20-vip.yaml + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Input from the VIP (parallel input capture) module + +patternProperties: + "^csi@[0-9a-f]+$": + type: object + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + +allOf: + - if: + properties: + compatible: + contains: + enum: + - nvidia,tegra20-vi + - nvidia,tegra30-vi + - nvidia,tegra114-vi + - nvidia,tegra124-vi + then: + required: + - resets + - reset-names + else: + required: + - power-domains + +examples: + - | + #include <dt-bindings/clock/tegra20-car.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + camera@48 { + compatible = "aptina,mt9v111"; + reg = <0x48>; + clocks = <&camera_clk>; + + port { + mt9v111_out: endpoint { + remote-endpoint = <&vi_vip_in>; + }; + }; + }; + }; + + vi@54080000 { + compatible = "nvidia,tegra20-vi"; + reg = <0x54080000 0x00040000>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA20_CLK_VI>; + resets = <&tegra_car 100>; + reset-names = "vi"; + + vip { + compatible = "nvidia,tegra20-vip"; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + vi_vip_in: endpoint { + remote-endpoint = <&mt9v111_out>; + }; + }; + port@1 { + reg = <1>; + vi_vip_out: endpoint { + remote-endpoint = <&vi_in>; + }; + }; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + vi_in: endpoint { + remote-endpoint = <&vi_vip_out>; + }; + }; + }; + }; + + - | + #include <dt-bindings/clock/tegra210-car.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + vi@54080000 { + compatible = "nvidia,tegra210-vi"; + reg = <0x54080000 0x00000700>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + assigned-clocks = <&tegra_car TEGRA210_CLK_VI>; + assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>; + + clocks = <&tegra_car TEGRA210_CLK_VI>; + power-domains = <&pd_venc>; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0x0 0x54080000 0x2000>; + + csi@838 { + compatible = "nvidia,tegra210-csi"; + reg = <0x838 0x1300>; + assigned-clocks = <&tegra_car TEGRA210_CLK_CILAB>, + <&tegra_car TEGRA210_CLK_CILCD>, + <&tegra_car TEGRA210_CLK_CILE>, + <&tegra_car TEGRA210_CLK_CSI_TPG>; + assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_P>, + <&tegra_car TEGRA210_CLK_PLL_P>, + <&tegra_car TEGRA210_CLK_PLL_P>; + assigned-clock-rates = <102000000>, + <102000000>, + <102000000>, + <972000000>; + + clocks = <&tegra_car TEGRA210_CLK_CSI>, + <&tegra_car TEGRA210_CLK_CILAB>, + <&tegra_car TEGRA210_CLK_CILCD>, + <&tegra_car TEGRA210_CLK_CILE>, + <&tegra_car TEGRA210_CLK_CSI_TPG>; + clock-names = "csi", "cilab", "cilcd", "cile", "csi_tpg"; + power-domains = <&pd_sor>; + }; + }; diff --git a/dts/Bindings/display/tegra/nvidia,tegra20-vip.yaml b/dts/Bindings/display/tegra/nvidia,tegra20-vip.yaml new file mode 100644 index 0000000000..14294edb8d --- /dev/null +++ b/dts/Bindings/display/tegra/nvidia,tegra20-vip.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-vip.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra VIP (parallel video capture) controller + +maintainers: + - Luca Ceresoli <luca.ceresoli@bootlin.com> + +properties: + compatible: + enum: + - nvidia,tegra20-vip + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Port receiving the video stream from the sensor + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Port sending the video stream to the VI + + required: + - port@0 + - port@1 + +unevaluatedProperties: false + +required: + - compatible + - ports + +# see nvidia,tegra20-vi.yaml for an example diff --git a/dts/Bindings/display/tegra/nvidia,tegra210-csi.yaml b/dts/Bindings/display/tegra/nvidia,tegra210-csi.yaml new file mode 100644 index 0000000000..fa07a40d10 --- /dev/null +++ b/dts/Bindings/display/tegra/nvidia,tegra210-csi.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra210-csi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra CSI controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + $nodename: + pattern: "^csi@[0-9a-f]+$" + + compatible: + enum: + - nvidia,tegra210-csi + + reg: + maxItems: 1 + + clocks: + items: + - description: module clock + - description: A/B lanes clock + - description: C/D lanes clock + - description: E lane clock + - description: test pattern generator clock + + clock-names: + items: + - const: csi + - const: cilab + - const: cilcd + - const: cile + - const: csi_tpg + + power-domains: + maxItems: 1 + +additionalProperties: false + +required: + - compatible + - reg + - clocks + - clock-names + - power-domains + +# see nvidia,tegra20-vi.yaml for an example diff --git a/dts/Bindings/display/ti/ti,am65x-dss.yaml b/dts/Bindings/display/ti/ti,am65x-dss.yaml index eb04c23306..b6767ef0d2 100644 --- a/dts/Bindings/display/ti/ti,am65x-dss.yaml +++ b/dts/Bindings/display/ti/ti,am65x-dss.yaml @@ -2,8 +2,8 @@ # Copyright 2019 Texas Instruments Incorporated %YAML 1.2 --- -$id: "http://devicetree.org/schemas/display/ti/ti,am65x-dss.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/display/ti/ti,am65x-dss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Texas Instruments AM65x Display Subsystem @@ -12,14 +12,19 @@ maintainers: - Tomi Valkeinen <tomi.valkeinen@ti.com> description: | - The AM65x TI Keystone Display SubSystem with two output ports and - two video planes. The first video port supports OLDI and the second - supports DPI format. The fist plane is full video plane with all - features and the second is a "lite plane" without scaling support. + The AM625 and AM65x TI Keystone Display SubSystem with two output + ports and two video planes. In AM65x DSS, the first video port + supports 1 OLDI TX and in AM625 DSS, the first video port output is + internally routed to 2 OLDI TXes. The second video port supports DPI + format. The first plane is full video plane with all features and the + second is a "lite plane" without scaling support. properties: compatible: - const: ti,am65x-dss + enum: + - ti,am625-dss + - ti,am62a7,dss + - ti,am65x-dss reg: description: @@ -55,6 +60,14 @@ properties: - const: vp1 - const: vp2 + assigned-clocks: + minItems: 1 + maxItems: 3 + + assigned-clock-parents: + minItems: 1 + maxItems: 3 + interrupts: maxItems: 1 @@ -62,35 +75,28 @@ properties: maxItems: 1 description: phandle to the associated power domain - ports: - type: object - description: - Ports as described in Documentation/devicetree/bindings/graph.txt - properties: - "#address-cells": - const: 1 + dma-coherent: + type: boolean - "#size-cells": - const: 0 + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: - The DSS OLDI output port node form video port 1 + For AM65x DSS, the OLDI output port node from video port 1. + For AM625 DSS, the internal DPI output port node from video + port 1. + For AM62A7 DSS, the port is tied off inside the SoC. port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: The DSS DPI output port node from video port 2 - required: - - "#address-cells" - - "#size-cells" - ti,am65x-oldi-io-ctrl: - allOf: - - $ref: "/schemas/types.yaml#/definitions/phandle-array" - - maxItems: 1 + $ref: /schemas/types.yaml#/definitions/phandle description: phandle to syscon device node mapping OLDI IO_CTRL registers. The mapped range should point to OLDI_DAT0_IO_CTRL, map it and @@ -104,6 +110,18 @@ properties: Input memory (from main memory to dispc) bandwidth limit in bytes per second +allOf: + - if: + properties: + compatible: + contains: + const: ti,am62a7-dss + then: + properties: + ports: + properties: + port@0: false + required: - compatible - reg @@ -123,13 +141,13 @@ examples: dss: dss@4a00000 { compatible = "ti,am65x-dss"; - reg = <0x0 0x04a00000 0x0 0x1000>, /* common */ - <0x0 0x04a02000 0x0 0x1000>, /* vidl1 */ - <0x0 0x04a06000 0x0 0x1000>, /* vid */ - <0x0 0x04a07000 0x0 0x1000>, /* ovr1 */ - <0x0 0x04a08000 0x0 0x1000>, /* ovr2 */ - <0x0 0x04a0a000 0x0 0x1000>, /* vp1 */ - <0x0 0x04a0b000 0x0 0x1000>; /* vp2 */ + reg = <0x04a00000 0x1000>, /* common */ + <0x04a02000 0x1000>, /* vidl1 */ + <0x04a06000 0x1000>, /* vid */ + <0x04a07000 0x1000>, /* ovr1 */ + <0x04a08000 0x1000>, /* ovr2 */ + <0x04a0a000 0x1000>, /* vp1 */ + <0x04a0b000 0x1000>; /* vp2 */ reg-names = "common", "vidl1", "vid", "ovr1", "ovr2", "vp1", "vp2"; ti,am65x-oldi-io-ctrl = <&dss_oldi_io_ctrl>; diff --git a/dts/Bindings/display/ti/ti,j721e-dss.yaml b/dts/Bindings/display/ti/ti,j721e-dss.yaml index eb4b1a2662..fad7cba58d 100644 --- a/dts/Bindings/display/ti/ti,j721e-dss.yaml +++ b/dts/Bindings/display/ti/ti,j721e-dss.yaml @@ -2,8 +2,8 @@ # Copyright 2019 Texas Instruments Incorporated %YAML 1.2 --- -$id: "http://devicetree.org/schemas/display/ti/ti,j721e-dss.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/display/ti/ti,j721e-dss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Texas Instruments J721E Display Subsystem @@ -77,8 +77,16 @@ properties: - const: vp3 - const: vp4 + assigned-clocks: + minItems: 1 + maxItems: 5 + + assigned-clock-parents: + minItems: 1 + maxItems: 5 + interrupts: - items: + items: - description: common_m DSS Master common - description: common_s0 DSS Shared common 0 - description: common_s1 DSS Shared common 1 @@ -95,41 +103,33 @@ properties: maxItems: 1 description: phandle to the associated power domain - ports: - type: object - description: - Ports as described in Documentation/devicetree/bindings/graph.txt - properties: - "#address-cells": - const: 1 + dma-coherent: + type: boolean - "#size-cells": - const: 0 + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: The output port node form video port 1 port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: The output port node from video port 2 port@2: - type: object + $ref: /schemas/graph.yaml#/properties/port description: The output port node from video port 3 port@3: - type: object + $ref: /schemas/graph.yaml#/properties/port description: The output port node from video port 4 - required: - - "#address-cells" - - "#size-cells" - max-memory-bandwidth: $ref: /schemas/types.yaml#/definitions/uint32 description: @@ -156,23 +156,23 @@ examples: dss: dss@4a00000 { compatible = "ti,j721e-dss"; - reg = <0x00 0x04a00000 0x00 0x10000>, /* common_m */ - <0x00 0x04a10000 0x00 0x10000>, /* common_s0*/ - <0x00 0x04b00000 0x00 0x10000>, /* common_s1*/ - <0x00 0x04b10000 0x00 0x10000>, /* common_s2*/ - <0x00 0x04a20000 0x00 0x10000>, /* vidl1 */ - <0x00 0x04a30000 0x00 0x10000>, /* vidl2 */ - <0x00 0x04a50000 0x00 0x10000>, /* vid1 */ - <0x00 0x04a60000 0x00 0x10000>, /* vid2 */ - <0x00 0x04a70000 0x00 0x10000>, /* ovr1 */ - <0x00 0x04a90000 0x00 0x10000>, /* ovr2 */ - <0x00 0x04ab0000 0x00 0x10000>, /* ovr3 */ - <0x00 0x04ad0000 0x00 0x10000>, /* ovr4 */ - <0x00 0x04a80000 0x00 0x10000>, /* vp1 */ - <0x00 0x04aa0000 0x00 0x10000>, /* vp2 */ - <0x00 0x04ac0000 0x00 0x10000>, /* vp3 */ - <0x00 0x04ae0000 0x00 0x10000>, /* vp4 */ - <0x00 0x04af0000 0x00 0x10000>; /* wb */ + reg = <0x04a00000 0x10000>, /* common_m */ + <0x04a10000 0x10000>, /* common_s0*/ + <0x04b00000 0x10000>, /* common_s1*/ + <0x04b10000 0x10000>, /* common_s2*/ + <0x04a20000 0x10000>, /* vidl1 */ + <0x04a30000 0x10000>, /* vidl2 */ + <0x04a50000 0x10000>, /* vid1 */ + <0x04a60000 0x10000>, /* vid2 */ + <0x04a70000 0x10000>, /* ovr1 */ + <0x04a90000 0x10000>, /* ovr2 */ + <0x04ab0000 0x10000>, /* ovr3 */ + <0x04ad0000 0x10000>, /* ovr4 */ + <0x04a80000 0x10000>, /* vp1 */ + <0x04aa0000 0x10000>, /* vp2 */ + <0x04ac0000 0x10000>, /* vp3 */ + <0x04ae0000 0x10000>, /* vp4 */ + <0x04af0000 0x10000>; /* wb */ reg-names = "common_m", "common_s0", "common_s1", "common_s2", "vidl1", "vidl2","vid1","vid2", diff --git a/dts/Bindings/display/ti/ti,k2g-dss.yaml b/dts/Bindings/display/ti/ti,k2g-dss.yaml index 8f87b82c66..96b1439f88 100644 --- a/dts/Bindings/display/ti/ti,k2g-dss.yaml +++ b/dts/Bindings/display/ti/ti,k2g-dss.yaml @@ -2,8 +2,8 @@ # Copyright 2019 Texas Instruments Incorporated %YAML 1.2 --- -$id: "http://devicetree.org/schemas/display/ti/ti,k2g-dss.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/display/ti/ti,k2g-dss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Texas Instruments K2G Display Subsystem @@ -54,9 +54,8 @@ properties: description: phandle to the associated power domain port: - type: object + $ref: /schemas/graph.yaml#/properties/port description: - Port as described in Documentation/devicetree/bindings/graph.txt. The DSS DPI output port node max-memory-bandwidth: diff --git a/dts/Bindings/display/tilcdc/tilcdc.txt b/dts/Bindings/display/tilcdc/tilcdc.txt index aac617acb6..3b3d0bbfcf 100644 --- a/dts/Bindings/display/tilcdc/tilcdc.txt +++ b/dts/Bindings/display/tilcdc/tilcdc.txt @@ -37,7 +37,7 @@ Optional nodes: supports a single port with a single endpoint. - See also Documentation/devicetree/bindings/display/tilcdc/panel.txt and - Documentation/devicetree/bindings/display/bridge/ti,tfp410.txt for connecting + Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml for connecting tfp410 DVI encoder or lcd panel to lcdc [1] There is an errata about AM335x color wiring. For 16-bit color mode @@ -46,7 +46,7 @@ Optional nodes: crossed and LCD_DATA[0:4] is for Red[3:7] and LCD_DATA[11:15] is for Blue[3-7]. For more details see section 3.1.1 in AM335x Silicon Errata: - http://www.ti.com/general/docs/lit/getliterature.tsp?baseLiteratureNumber=sprz360 + https://www.ti.com/general/docs/lit/getliterature.tsp?baseLiteratureNumber=sprz360 Example: @@ -60,7 +60,7 @@ Example: blue-and-red-wiring = "crossed"; port { - lcdc_0: endpoint@0 { + lcdc_0: endpoint { remote-endpoint = <&hdmi_0>; }; }; @@ -75,7 +75,7 @@ Example: pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; port { - hdmi_0: endpoint@0 { + hdmi_0: endpoint { remote-endpoint = <&lcdc_0>; }; }; diff --git a/dts/Bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml b/dts/Bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml new file mode 100644 index 0000000000..554f9d5809 --- /dev/null +++ b/dts/Bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml @@ -0,0 +1,236 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/xlnx/xlnx,zynqmp-dpsub.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx ZynqMP DisplayPort Subsystem + +description: | + The DisplayPort subsystem of Xilinx ZynqMP (Zynq UltraScale+ MPSoC) + implements the display and audio pipelines based on the DisplayPort v1.2 + standard. The subsystem includes multiple functional blocks as below: + + +------------------------------------------------------------+ + +--------+ | +----------------+ +-----------+ | + | DPDMA | --->| | --> | Video | Video +-------------+ | + | 4x vid | | | | | Rendering | -+--> | | | +------+ + | 2x aud | | | Audio/Video | --> | Pipeline | | | DisplayPort |---> | PHY0 | + +--------+ | | Buffer Manager | +-----------+ | | Source | | +------+ + | | and STC | +-----------+ | | Controller | | +------+ + Live Video --->| | --> | Audio | Audio | |---> | PHY1 | + | | | | Mixer | --+-> | | | +------+ + Live Audio --->| | --> | | || +-------------+ | + | +----------------+ +-----------+ || | + +---------------------------------------||-------------------+ + vv + Blended Video and + Mixed Audio to PL + + The Buffer Manager interacts with external interface such as DMA engines or + live audio/video streams from the programmable logic. The Video Rendering + Pipeline blends the video and graphics layers and performs colorspace + conversion. The Audio Mixer mixes the incoming audio streams. The DisplayPort + Source Controller handles the DisplayPort protocol and connects to external + PHYs. + + The subsystem supports 2 video and 2 audio streams, and various pixel formats + and depths up to 4K@30 resolution. + + Please refer to "Zynq UltraScale+ Device Technical Reference Manual" + (https://www.xilinx.com/support/documentation/user_guides/ug1085-zynq-ultrascale-trm.pdf) + for more details. + +maintainers: + - Laurent Pinchart <laurent.pinchart@ideasonboard.com> + +properties: + compatible: + const: xlnx,zynqmp-dpsub-1.7 + + reg: + maxItems: 4 + reg-names: + items: + - const: dp + - const: blend + - const: av_buf + - const: aud + + interrupts: + maxItems: 1 + + clocks: + description: + The APB clock and at least one video clock are mandatory, the audio clock + is optional. + minItems: 2 + items: + - description: dp_apb_clk is the APB clock + - description: dp_aud_clk is the Audio clock + - description: + dp_vtc_pixel_clk_in is the non-live video clock (from Processing + System) + - description: + dp_live_video_in_clk is the live video clock (from Programmable + Logic) + clock-names: + oneOf: + - minItems: 2 + items: + - const: dp_apb_clk + - enum: [ dp_vtc_pixel_clk_in, dp_live_video_in_clk ] + - enum: [ dp_vtc_pixel_clk_in, dp_live_video_in_clk ] + - minItems: 3 + items: + - const: dp_apb_clk + - const: dp_aud_clk + - enum: [ dp_vtc_pixel_clk_in, dp_live_video_in_clk ] + - enum: [ dp_vtc_pixel_clk_in, dp_live_video_in_clk ] + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + dmas: + items: + - description: Video layer, plane 0 (RGB or luma) + - description: Video layer, plane 1 (U/V or U) + - description: Video layer, plane 2 (V) + - description: Graphics layer + dma-names: + items: + - const: vid0 + - const: vid1 + - const: vid2 + - const: gfx0 + + phys: + description: PHYs for the DP data lanes + minItems: 1 + maxItems: 2 + phy-names: + minItems: 1 + items: + - const: dp-phy0 + - const: dp-phy1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: | + Connections to the programmable logic and the DisplayPort PHYs. Each port + shall have a single endpoint. + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: The live video input from the programmable logic + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: The live graphics input from the programmable logic + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: The live audio input from the programmable logic + + port@3: + $ref: /schemas/graph.yaml#/properties/port + description: The blended video output to the programmable logic + + port@4: + $ref: /schemas/graph.yaml#/properties/port + description: The mixed audio output to the programmable logic + + port@5: + $ref: /schemas/graph.yaml#/properties/port + description: The DisplayPort output + + required: + - port@0 + - port@1 + - port@2 + - port@3 + - port@4 + - port@5 + +required: + - compatible + - reg + - reg-names + - interrupts + - clocks + - clock-names + - power-domains + - resets + - dmas + - dma-names + - phys + - phy-names + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/phy/phy.h> + #include <dt-bindings/reset/xlnx-zynqmp-resets.h> + + display@fd4a0000 { + compatible = "xlnx,zynqmp-dpsub-1.7"; + reg = <0xfd4a0000 0x1000>, + <0xfd4aa000 0x1000>, + <0xfd4ab000 0x1000>, + <0xfd4ac000 0x1000>; + reg-names = "dp", "blend", "av_buf", "aud"; + interrupts = <0 119 4>; + interrupt-parent = <&gic>; + + clock-names = "dp_apb_clk", "dp_aud_clk", "dp_live_video_in_clk"; + clocks = <&dp_aclk>, <&clkc 17>, <&si570_1>; + + power-domains = <&pd_dp>; + resets = <&reset ZYNQMP_RESET_DP>; + + dma-names = "vid0", "vid1", "vid2", "gfx0"; + dmas = <&xlnx_dpdma 0>, + <&xlnx_dpdma 1>, + <&xlnx_dpdma 2>, + <&xlnx_dpdma 3>; + + phys = <&psgtr 1 PHY_TYPE_DP 0 3>, + <&psgtr 0 PHY_TYPE_DP 1 3>; + + phy-names = "dp-phy0", "dp-phy1"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + port@1 { + reg = <1>; + }; + port@2 { + reg = <2>; + }; + port@3 { + reg = <3>; + }; + port@4 { + reg = <4>; + }; + port@5 { + reg = <5>; + dpsub_dp_out: endpoint { + remote-endpoint = <&dp_connector>; + }; + }; + }; + }; + +... diff --git a/dts/Bindings/display/xylon,logicvc-display.yaml b/dts/Bindings/display/xylon,logicvc-display.yaml new file mode 100644 index 0000000000..76b804b7c8 --- /dev/null +++ b/dts/Bindings/display/xylon,logicvc-display.yaml @@ -0,0 +1,301 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 Bootlin +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/xylon,logicvc-display.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xylon LogiCVC display controller + +maintainers: + - Paul Kocialkowski <paul.kocialkowski@bootlin.com> + +description: | + The Xylon LogiCVC is a display controller that supports multiple layers. + It is usually implemented as programmable logic and was optimized for use + with Xilinx Zynq-7000 SoCs and Xilinx FPGAs. + + Because the controller is intended for use in a FPGA, most of the + configuration of the controller takes place at logic configuration bitstream + synthesis time. As a result, many of the device-tree bindings are meant to + reflect the synthesis configuration and must not be configured differently. + Matching synthesis parameters are provided when applicable. + + Layers are declared in the "layers" sub-node and have dedicated configuration. + In version 3 of the controller, each layer has fixed memory offset and address + starting from the video memory base address for its framebuffer. In version 4, + framebuffers are configured with a direct memory address instead. + +properties: + compatible: + enum: + - xylon,logicvc-3.02.a-display + - xylon,logicvc-4.01.a-display + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 4 + + clock-names: + minItems: 1 + items: + # vclk is required and must be provided as first item. + - const: vclk + # Other clocks are optional and can be provided in any order. + - enum: + - vclk2 + - lvdsclk + - lvdsclkn + - enum: + - vclk2 + - lvdsclk + - lvdsclkn + - enum: + - vclk2 + - lvdsclk + - lvdsclkn + + interrupts: + maxItems: 1 + + memory-region: + maxItems: 1 + + xylon,display-interface: + enum: + # Parallel RGB interface (C_DISPLAY_INTERFACE == 0) + - parallel-rgb + # ITU-T BR656 interface (C_DISPLAY_INTERFACE == 1) + - bt656 + # 4-bit LVDS interface (C_DISPLAY_INTERFACE == 2) + - lvds-4bits + # 3-bit LVDS interface (C_DISPLAY_INTERFACE == 4) + - lvds-3bits + # DVI interface (C_DISPLAY_INTERFACE == 5) + - dvi + description: Display output interface (C_DISPLAY_INTERFACE). + + xylon,display-colorspace: + enum: + # RGB colorspace (C_DISPLAY_COLOR_SPACE == 0) + - rgb + # YUV 4:2:2 colorspace (C_DISPLAY_COLOR_SPACE == 1) + - yuv422 + # YUV 4:4:4 colorspace (C_DISPLAY_COLOR_SPACE == 2) + - yuv444 + description: Display output colorspace (C_DISPLAY_COLOR_SPACE). + + xylon,display-depth: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Display output depth (C_PIXEL_DATA_WIDTH). + + xylon,row-stride: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Fixed number of pixels in a framebuffer row (C_ROW_STRIDE). + + xylon,dithering: + $ref: /schemas/types.yaml#/definitions/flag + description: Dithering module is enabled (C_XCOLOR) + + xylon,background-layer: + $ref: /schemas/types.yaml#/definitions/flag + description: | + The last layer is used to display a black background (C_USE_BACKGROUND). + The layer must still be registered. + + xylon,layers-configurable: + $ref: /schemas/types.yaml#/definitions/flag + description: | + Configuration of layers' size, position and offset is enabled + (C_USE_SIZE_POSITION). + + layers: + type: object + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + patternProperties: + "^layer@[0-9]+$": + type: object + + properties: + reg: + maxItems: 1 + + xylon,layer-depth: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Layer depth (C_LAYER_X_DATA_WIDTH). + + xylon,layer-colorspace: + enum: + # RGB colorspace (C_LAYER_X_TYPE == 0) + - rgb + # YUV packed colorspace (C_LAYER_X_TYPE == 0) + - yuv + description: Layer colorspace (C_LAYER_X_TYPE). + + xylon,layer-alpha-mode: + enum: + # Alpha is configured layer-wide (C_LAYER_X_ALPHA_MODE == 0) + - layer + # Alpha is configured per-pixel (C_LAYER_X_ALPHA_MODE == 1) + - pixel + description: Alpha mode for the layer (C_LAYER_X_ALPHA_MODE). + + xylon,layer-base-offset: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Offset in number of lines (C_LAYER_X_OFFSET) starting from the + video RAM base (C_VMEM_BASEADDR), only for version 3. + + xylon,layer-buffer-offset: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Offset in number of lines (C_BUFFER_*_OFFSET) starting from the + layer base offset for the second buffer used in double-buffering. + + xylon,layer-primary: + $ref: /schemas/types.yaml#/definitions/flag + description: | + Layer should be registered as a primary plane (exactly one is + required). + + additionalProperties: false + + required: + - reg + - xylon,layer-depth + - xylon,layer-colorspace + - xylon,layer-alpha-mode + + required: + - "#address-cells" + - "#size-cells" + - layer@0 + + additionalProperties: false + + description: | + The description of the display controller layers, containing layer + sub-nodes that each describe a registered layer. + + port: + $ref: /schemas/graph.yaml#/properties/port + description: | + Video output port, typically connected to a panel or bridge. + +additionalProperties: false + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + - xylon,display-interface + - xylon,display-colorspace + - xylon,display-depth + - xylon,row-stride + - layers + - port + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + logicvc: logicvc@43c00000 { + compatible = "xylon,logicvc-3.02.a", "syscon", "simple-mfd"; + reg = <0x43c00000 0x6000>; + + #address-cells = <1>; + #size-cells = <1>; + + logicvc_display: display@0 { + compatible = "xylon,logicvc-3.02.a-display"; + reg = <0x0 0x6000>; + + memory-region = <&logicvc_cma>; + + clocks = <&logicvc_vclk 0>, <&logicvc_lvdsclk 0>; + clock-names = "vclk", "lvdsclk"; + + interrupt-parent = <&intc>; + interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>; + + xylon,display-interface = "lvds-4bits"; + xylon,display-colorspace = "rgb"; + xylon,display-depth = <16>; + xylon,row-stride = <1024>; + + xylon,layers-configurable; + + layers { + #address-cells = <1>; + #size-cells = <0>; + + layer@0 { + reg = <0>; + xylon,layer-depth = <16>; + xylon,layer-colorspace = "rgb"; + xylon,layer-alpha-mode = "layer"; + xylon,layer-base-offset = <0>; + xylon,layer-buffer-offset = <480>; + xylon,layer-primary; + }; + + layer@1 { + reg = <1>; + xylon,layer-depth = <16>; + xylon,layer-colorspace = "rgb"; + xylon,layer-alpha-mode = "layer"; + xylon,layer-base-offset = <2400>; + xylon,layer-buffer-offset = <480>; + }; + + layer@2 { + reg = <2>; + xylon,layer-depth = <16>; + xylon,layer-colorspace = "rgb"; + xylon,layer-alpha-mode = "layer"; + xylon,layer-base-offset = <960>; + xylon,layer-buffer-offset = <480>; + }; + + layer@3 { + reg = <3>; + xylon,layer-depth = <16>; + xylon,layer-colorspace = "rgb"; + xylon,layer-alpha-mode = "layer"; + xylon,layer-base-offset = <480>; + xylon,layer-buffer-offset = <480>; + }; + + layer@4 { + reg = <4>; + xylon,layer-depth = <16>; + xylon,layer-colorspace = "rgb"; + xylon,layer-alpha-mode = "layer"; + xylon,layer-base-offset = <8192>; + xylon,layer-buffer-offset = <480>; + }; + }; + + port { + #address-cells = <1>; + #size-cells = <0>; + + logicvc_output: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_input>; + }; + }; + }; + }; diff --git a/dts/Bindings/display/zte,vou.txt b/dts/Bindings/display/zte,vou.txt deleted file mode 100644 index 38476475fd..0000000000 --- a/dts/Bindings/display/zte,vou.txt +++ /dev/null @@ -1,120 +0,0 @@ -ZTE VOU Display Controller - -This is a display controller found on ZTE ZX296718 SoC. It includes multiple -Graphic Layer (GL) and Video Layer (VL), two Mixers/Channels, and a few blocks -handling scaling, color space conversion etc. VOU also integrates the support -for typical output devices, like HDMI, TV Encoder, VGA, and RGB LCD. - -* Master VOU node - -It must be the parent node of all the sub-device nodes. - -Required properties: - - compatible: should be "zte,zx296718-vou" - - #address-cells: should be <1> - - #size-cells: should be <1> - - ranges: list of address translations between VOU and sub-devices - -* VOU DPC device - -Required properties: - - compatible: should be "zte,zx296718-dpc" - - reg: Physical base address and length of DPC register regions, one for each - entry in 'reg-names' - - reg-names: The names of register regions. The following regions are required: - "osd" - "timing_ctrl" - "dtrc" - "vou_ctrl" - "otfppu" - - interrupts: VOU DPC interrupt number to CPU - - clocks: A list of phandle + clock-specifier pairs, one for each entry - in 'clock-names' - - clock-names: A list of clock names. The following clocks are required: - "aclk" - "ppu_wclk" - "main_wclk" - "aux_wclk" - -* HDMI output device - -Required properties: - - compatible: should be "zte,zx296718-hdmi" - - reg: Physical base address and length of the HDMI device IO region - - interrupts : HDMI interrupt number to CPU - - clocks: A list of phandle + clock-specifier pairs, one for each entry - in 'clock-names' - - clock-names: A list of clock names. The following clocks are required: - "osc_cec" - "osc_clk" - "xclk" - -* TV Encoder output device - -Required properties: - - compatible: should be "zte,zx296718-tvenc" - - reg: Physical base address and length of the TVENC device IO region - - zte,tvenc-power-control: the phandle to SYSCTRL block followed by two - integer cells. The first cell is the offset of SYSCTRL register used - to control TV Encoder DAC power, and the second cell is the bit mask. - -* VGA output device - -Required properties: - - compatible: should be "zte,zx296718-vga" - - reg: Physical base address and length of the VGA device IO region - - interrupts : VGA interrupt number to CPU - - clocks: Phandle with clock-specifier pointing to VGA I2C clock. - - clock-names: Must be "i2c_wclk". - - zte,vga-power-control: the phandle to SYSCTRL block followed by two - integer cells. The first cell is the offset of SYSCTRL register used - to control VGA DAC power, and the second cell is the bit mask. - -Example: - -vou: vou@1440000 { - compatible = "zte,zx296718-vou"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x1440000 0x10000>; - - dpc: dpc@0 { - compatible = "zte,zx296718-dpc"; - reg = <0x0000 0x1000>, <0x1000 0x1000>, - <0x5000 0x1000>, <0x6000 0x1000>, - <0xa000 0x1000>; - reg-names = "osd", "timing_ctrl", - "dtrc", "vou_ctrl", - "otfppu"; - interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&topcrm VOU_ACLK>, <&topcrm VOU_PPU_WCLK>, - <&topcrm VOU_MAIN_WCLK>, <&topcrm VOU_AUX_WCLK>; - clock-names = "aclk", "ppu_wclk", - "main_wclk", "aux_wclk"; - }; - - vga: vga@8000 { - compatible = "zte,zx296718-vga"; - reg = <0x8000 0x1000>; - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&topcrm VGA_I2C_WCLK>; - clock-names = "i2c_wclk"; - zte,vga-power-control = <&sysctrl 0x170 0xe0>; - }; - - hdmi: hdmi@c000 { - compatible = "zte,zx296718-hdmi"; - reg = <0xc000 0x4000>; - interrupts = <GIC_SPI 82 IRQ_TYPE_EDGE_RISING>; - clocks = <&topcrm HDMI_OSC_CEC>, - <&topcrm HDMI_OSC_CLK>, - <&topcrm HDMI_XCLK>; - clock-names = "osc_cec", "osc_clk", "xclk"; - }; - - tvenc: tvenc@2000 { - compatible = "zte,zx296718-tvenc"; - reg = <0x2000 0x1000>; - zte,tvenc-power-control = <&sysctrl 0x170 0x10>; - }; -}; |