Diffstat (limited to 'dts/Bindings/iio/gyroscope/nxp,fxas21002c.txt')
1 files changed, 31 insertions, 0 deletions
diff --git a/dts/Bindings/iio/gyroscope/nxp,fxas21002c.txt b/dts/Bindings/iio/gyroscope/nxp,fxas21002c.txt
new file mode 100644
@@ -0,0 +1,31 @@
+* NXP FXAS21002C Gyroscope device tree bindings
+ - compatible : should be "nxp,fxas21002c"
+ - reg : the I2C address of the sensor or SPI chip select number for the
+ - vdd-supply: phandle to the regulator that provides power to the sensor.
+ - vddio-supply: phandle to the regulator that provides power to the bus.
+ - reset-gpios : gpio used to reset the device, see gpio/gpio.txt
+ - interrupts : device support 2 interrupts, INT1 and INT2,
+ the interrupts can be triggered on rising or falling edges.
+ See interrupt-controller/interrupts.txt
+ - interrupt-names: should contain "INT1" or "INT2", the gyroscope interrupt
+ line in use.
+ - drive-open-drain: the interrupt/data ready line will be configured
+ as open drain, which is useful if several sensors share
+ the same interrupt line. This is a boolean property.
+ (This binding is taken from pinctrl/pinctrl-bindings.txt)
+ compatible = "nxp,fxas21002c";
+ reg = <0x20>;
+ vdd-supply = <®_peri_3p15v>;
+ vddio-supply = <®_peri_3p15v>;