summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/iio
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/iio')
-rw-r--r--dts/Bindings/iio/accel/kionix,kxcjk1013.txt17
-rw-r--r--dts/Bindings/iio/adc/adi,ad7606.txt1
-rw-r--r--dts/Bindings/iio/adc/adi,ad7780.txt48
-rw-r--r--dts/Bindings/iio/adc/amlogic,meson-saradc.txt1
-rw-r--r--dts/Bindings/iio/adc/avia-hx711.txt24
-rw-r--r--dts/Bindings/iio/adc/avia-hx711.yaml66
-rw-r--r--dts/Bindings/iio/adc/imx7d-adc.txt2
-rw-r--r--dts/Bindings/iio/adc/lpc32xx-adc.txt5
-rw-r--r--dts/Bindings/iio/adc/qcom,spmi-vadc.txt1
-rw-r--r--dts/Bindings/iio/adc/ti-ads8344.txt19
-rw-r--r--dts/Bindings/iio/chemical/plantower,pms7003.txt8
-rw-r--r--dts/Bindings/iio/counter/stm32-lptimer-cnt.txt27
-rw-r--r--dts/Bindings/iio/gyroscope/bmg160.txt20
-rw-r--r--dts/Bindings/iio/gyroscope/nxp,fxas21002c.txt31
-rw-r--r--dts/Bindings/iio/imu/adi,adis16480.txt85
-rw-r--r--dts/Bindings/iio/imu/st_lsm6dsx.txt3
-rw-r--r--dts/Bindings/iio/light/vcnl4000.txt24
-rw-r--r--dts/Bindings/iio/pressure/bmp085.txt27
-rw-r--r--dts/Bindings/iio/pressure/bmp085.yaml70
-rw-r--r--dts/Bindings/iio/proximity/devantech-srf04.txt28
-rw-r--r--dts/Bindings/iio/proximity/devantech-srf04.yaml66
-rw-r--r--dts/Bindings/iio/proximity/maxbotix,mb1232.txt29
-rw-r--r--dts/Bindings/iio/st-sensors.txt1
-rw-r--r--dts/Bindings/iio/temperature/max31856.txt24
-rw-r--r--dts/Bindings/iio/temperature/temperature-bindings.txt7
25 files changed, 527 insertions, 107 deletions
diff --git a/dts/Bindings/iio/accel/kionix,kxcjk1013.txt b/dts/Bindings/iio/accel/kionix,kxcjk1013.txt
new file mode 100644
index 0000000..eb76a02
--- /dev/null
+++ b/dts/Bindings/iio/accel/kionix,kxcjk1013.txt
@@ -0,0 +1,17 @@
+Kionix KXCJK-1013 Accelerometer device tree bindings
+
+Required properties:
+
+- compatible: Must be one of:
+ "kionix,kxcjk1013"
+ "kionix,kxcj91008"
+ "kionix,kxtj21009"
+ "kionix,kxtf9"
+ - reg: i2c slave address
+
+Example:
+
+kxtf9@f {
+ compatible = "kionix,kxtf9";
+ reg = <0x0F>;
+};
diff --git a/dts/Bindings/iio/adc/adi,ad7606.txt b/dts/Bindings/iio/adc/adi,ad7606.txt
index d7b6241..d865246 100644
--- a/dts/Bindings/iio/adc/adi,ad7606.txt
+++ b/dts/Bindings/iio/adc/adi,ad7606.txt
@@ -7,6 +7,7 @@ Required properties for the AD7606:
* "adi,ad7606-8"
* "adi,ad7606-6"
* "adi,ad7606-4"
+ * "adi,ad7616"
- reg: SPI chip select number for the device
- spi-max-frequency: Max SPI frequency to use
see: Documentation/devicetree/bindings/spi/spi-bus.txt
diff --git a/dts/Bindings/iio/adc/adi,ad7780.txt b/dts/Bindings/iio/adc/adi,ad7780.txt
new file mode 100644
index 0000000..440e525
--- /dev/null
+++ b/dts/Bindings/iio/adc/adi,ad7780.txt
@@ -0,0 +1,48 @@
+* Analog Devices AD7170/AD7171/AD7780/AD7781
+
+Data sheets:
+
+- AD7170:
+ * https://www.analog.com/media/en/technical-documentation/data-sheets/AD7170.pdf
+- AD7171:
+ * https://www.analog.com/media/en/technical-documentation/data-sheets/AD7171.pdf
+- AD7780:
+ * https://www.analog.com/media/en/technical-documentation/data-sheets/ad7780.pdf
+- AD7781:
+ * https://www.analog.com/media/en/technical-documentation/data-sheets/AD7781.pdf
+
+Required properties:
+
+- compatible: should be one of
+ * "adi,ad7170"
+ * "adi,ad7171"
+ * "adi,ad7780"
+ * "adi,ad7781"
+- reg: spi chip select number for the device
+- vref-supply: the regulator supply for the ADC reference voltage
+
+Optional properties:
+
+- powerdown-gpios: must be the device tree identifier of the PDRST pin. If
+ specified, it will be asserted during driver probe. As the
+ line is active high, it should be marked GPIO_ACTIVE_HIGH.
+- adi,gain-gpios: must be the device tree identifier of the GAIN pin. Only for
+ the ad778x chips. If specified, it will be asserted during
+ driver probe. As the line is active low, it should be marked
+ GPIO_ACTIVE_LOW.
+- adi,filter-gpios: must be the device tree identifier of the FILTER pin. Only
+ for the ad778x chips. If specified, it will be asserted
+ during driver probe. As the line is active low, it should be
+ marked GPIO_ACTIVE_LOW.
+
+Example:
+
+adc@0 {
+ compatible = "adi,ad7780";
+ reg = <0>;
+ vref-supply = <&vdd_supply>
+
+ powerdown-gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
+ adi,gain-gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ adi,filter-gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+};
diff --git a/dts/Bindings/iio/adc/amlogic,meson-saradc.txt b/dts/Bindings/iio/adc/amlogic,meson-saradc.txt
index 75c7759..d57e9df 100644
--- a/dts/Bindings/iio/adc/amlogic,meson-saradc.txt
+++ b/dts/Bindings/iio/adc/amlogic,meson-saradc.txt
@@ -9,6 +9,7 @@ Required properties:
- "amlogic,meson-gxl-saradc" for GXL
- "amlogic,meson-gxm-saradc" for GXM
- "amlogic,meson-axg-saradc" for AXG
+ - "amlogic,meson-g12a-saradc" for AXG
along with the generic "amlogic,meson-saradc"
- reg: the physical base address and length of the registers
- interrupts: the interrupt indicating end of sampling
diff --git a/dts/Bindings/iio/adc/avia-hx711.txt b/dts/Bindings/iio/adc/avia-hx711.txt
deleted file mode 100644
index 7222328..0000000
--- a/dts/Bindings/iio/adc/avia-hx711.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-* AVIA HX711 ADC chip for weight cells
- Bit-banging driver
-
-Required properties:
- - compatible: Should be "avia,hx711"
- - sck-gpios: Definition of the GPIO for the clock
- - dout-gpios: Definition of the GPIO for data-out
- See Documentation/devicetree/bindings/gpio/gpio.txt
- - avdd-supply: Definition of the regulator used as analog supply
-
-Optional properties:
- - clock-frequency: Frequency of PD_SCK in Hz
- Minimum value allowed is 10 kHz because of maximum
- high time of 50 microseconds.
-
-Example:
-weight {
- compatible = "avia,hx711";
- sck-gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>;
- dout-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
- avdd-suppy = <&avdd>;
- clock-frequency = <100000>;
-};
-
diff --git a/dts/Bindings/iio/adc/avia-hx711.yaml b/dts/Bindings/iio/adc/avia-hx711.yaml
new file mode 100644
index 0000000..8a4100c
--- /dev/null
+++ b/dts/Bindings/iio/adc/avia-hx711.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/iio/adc/avia-hx711.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: AVIA HX711 ADC chip for weight cells
+
+maintainers:
+ - Andreas Klinger <ak@it-klinger.de>
+
+description: |
+ Bit-banging driver using two GPIOs:
+ - sck-gpio gives a clock to the sensor with 24 cycles for data retrieval
+ and up to 3 cycles for selection of the input channel and gain for the
+ next measurement
+ - dout-gpio is the sensor data the sensor responds to the clock
+
+ Specifications about the driver can be found at:
+ http://www.aviaic.com/ENProducts.aspx
+
+properties:
+ compatible:
+ enum:
+ - avia,hx711
+
+ sck-gpios:
+ description:
+ Definition of the GPIO for the clock (output). In the datasheet it is
+ named PD_SCK
+ maxItems: 1
+
+ dout-gpios:
+ description:
+ Definition of the GPIO for the data-out sent by the sensor in
+ response to the clock (input).
+ See Documentation/devicetree/bindings/gpio/gpio.txt for information
+ on how to specify a consumer gpio.
+ maxItems: 1
+
+ avdd-supply:
+ description:
+ Definition of the regulator used as analog supply
+ maxItems: 1
+
+ clock-frequency:
+ minimum: 20000
+ maximum: 2500000
+ default: 400000
+
+required:
+ - compatible
+ - sck-gpios
+ - dout-gpios
+ - avdd-supply
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ weight {
+ compatible = "avia,hx711";
+ sck-gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>;
+ dout-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+ avdd-suppy = <&avdd>;
+ clock-frequency = <100000>;
+ };
diff --git a/dts/Bindings/iio/adc/imx7d-adc.txt b/dts/Bindings/iio/adc/imx7d-adc.txt
index 5c184b9..f1f3a55 100644
--- a/dts/Bindings/iio/adc/imx7d-adc.txt
+++ b/dts/Bindings/iio/adc/imx7d-adc.txt
@@ -10,6 +10,7 @@ Required properties:
- clocks: The root clock of the ADC controller
- clock-names: Must contain "adc", matching entry in the clocks property
- vref-supply: The regulator supply ADC reference voltage
+- #io-channel-cells: Must be 1 as per ../iio-bindings.txt
Example:
adc1: adc@30610000 {
@@ -19,4 +20,5 @@ adc1: adc@30610000 {
clocks = <&clks IMX7D_ADC_ROOT_CLK>;
clock-names = "adc";
vref-supply = <&reg_vcc_3v3_mcu>;
+ #io-channel-cells = <1>;
};
diff --git a/dts/Bindings/iio/adc/lpc32xx-adc.txt b/dts/Bindings/iio/adc/lpc32xx-adc.txt
index b3629d3..3a1bc66 100644
--- a/dts/Bindings/iio/adc/lpc32xx-adc.txt
+++ b/dts/Bindings/iio/adc/lpc32xx-adc.txt
@@ -6,6 +6,10 @@ Required properties:
region.
- interrupts: The ADC interrupt
+Optional:
+ - vref-supply: The regulator supply ADC reference voltage, optional
+ for legacy reason, but highly encouraging to us in new device tree
+
Example:
adc@40048000 {
@@ -13,4 +17,5 @@ Example:
reg = <0x40048000 0x1000>;
interrupt-parent = <&mic>;
interrupts = <39 0>;
+ vref-supply = <&vcc>;
};
diff --git a/dts/Bindings/iio/adc/qcom,spmi-vadc.txt b/dts/Bindings/iio/adc/qcom,spmi-vadc.txt
index c81993f..c878768 100644
--- a/dts/Bindings/iio/adc/qcom,spmi-vadc.txt
+++ b/dts/Bindings/iio/adc/qcom,spmi-vadc.txt
@@ -13,6 +13,7 @@ VADC node:
Definition: Should contain "qcom,spmi-vadc".
Should contain "qcom,spmi-adc5" for PMIC5 ADC driver.
Should contain "qcom,spmi-adc-rev2" for PMIC rev2 ADC driver.
+ Should contain "qcom,pms405-adc" for PMS405 PMIC
- reg:
Usage: required
diff --git a/dts/Bindings/iio/adc/ti-ads8344.txt b/dts/Bindings/iio/adc/ti-ads8344.txt
new file mode 100644
index 0000000..e47c375
--- /dev/null
+++ b/dts/Bindings/iio/adc/ti-ads8344.txt
@@ -0,0 +1,19 @@
+* Texas Instruments ADS8344 A/DC chip
+
+Required properties:
+ - compatible: Must be "ti,ads8344"
+ - reg: SPI chip select number for the device
+ - vref-supply: phandle to a regulator node that supplies the
+ reference voltage
+
+Recommended properties:
+ - spi-max-frequency: Definition as per
+ Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Example:
+adc@0 {
+ compatible = "ti,ads8344";
+ reg = <0>;
+ vref-supply = <&refin_supply>;
+ spi-max-frequency = <10000000>;
+};
diff --git a/dts/Bindings/iio/chemical/plantower,pms7003.txt b/dts/Bindings/iio/chemical/plantower,pms7003.txt
index 7b5f06f..c52ea21 100644
--- a/dts/Bindings/iio/chemical/plantower,pms7003.txt
+++ b/dts/Bindings/iio/chemical/plantower,pms7003.txt
@@ -1,7 +1,13 @@
* Plantower PMS7003 particulate matter sensor
Required properties:
-- compatible: must be "plantower,pms7003"
+- compatible: must one of:
+ "plantower,pms1003"
+ "plantower,pms3003"
+ "plantower,pms5003"
+ "plantower,pms6003"
+ "plantower,pms7003"
+ "plantower,pmsa003"
- vcc-supply: phandle to the regulator that provides power to the sensor
Optional properties:
diff --git a/dts/Bindings/iio/counter/stm32-lptimer-cnt.txt b/dts/Bindings/iio/counter/stm32-lptimer-cnt.txt
deleted file mode 100644
index a04aa5c..0000000
--- a/dts/Bindings/iio/counter/stm32-lptimer-cnt.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-STMicroelectronics STM32 Low-Power Timer quadrature encoder and counter
-
-STM32 Low-Power Timer provides several counter modes. It can be used as:
-- quadrature encoder to detect angular position and direction of rotary
- elements, from IN1 and IN2 input signals.
-- simple counter from IN1 input signal.
-
-Must be a sub-node of an STM32 Low-Power Timer device tree node.
-See ../mfd/stm32-lptimer.txt for details about the parent node.
-
-Required properties:
-- compatible: Must be "st,stm32-lptimer-counter".
-- pinctrl-names: Set to "default".
-- pinctrl-0: List of phandles pointing to pin configuration nodes,
- to set IN1/IN2 pins in mode of operation for Low-Power
- Timer input on external pin.
-
-Example:
- timer@40002400 {
- compatible = "st,stm32-lptimer";
- ...
- counter {
- compatible = "st,stm32-lptimer-counter";
- pinctrl-names = "default";
- pinctrl-0 = <&lptim1_in_pins>;
- };
- };
diff --git a/dts/Bindings/iio/gyroscope/bmg160.txt b/dts/Bindings/iio/gyroscope/bmg160.txt
new file mode 100644
index 0000000..78e18a1
--- /dev/null
+++ b/dts/Bindings/iio/gyroscope/bmg160.txt
@@ -0,0 +1,20 @@
+* Bosch BMG160 triaxial rotation sensor (gyroscope)
+
+Required properties:
+
+ - compatible : should be "bosch,bmg160" or "bosch,bmi055_gyro"
+ - reg : the I2C address of the sensor (0x69)
+
+Optional properties:
+
+ - interrupts : interrupt mapping for GPIO IRQ, it should by configured with
+ flags IRQ_TYPE_EDGE_RISING
+
+Example:
+
+bmg160@69 {
+ compatible = "bosch,bmg160";
+ reg = <0x69>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <18 (IRQ_TYPE_EDGE_RISING)>;
+};
diff --git a/dts/Bindings/iio/gyroscope/nxp,fxas21002c.txt b/dts/Bindings/iio/gyroscope/nxp,fxas21002c.txt
new file mode 100644
index 0000000..465e104
--- /dev/null
+++ b/dts/Bindings/iio/gyroscope/nxp,fxas21002c.txt
@@ -0,0 +1,31 @@
+* NXP FXAS21002C Gyroscope device tree bindings
+
+http://www.nxp.com/products/sensors/gyroscopes/3-axis-digital-gyroscope:FXAS21002C
+
+Required properties:
+ - compatible : should be "nxp,fxas21002c"
+ - reg : the I2C address of the sensor or SPI chip select number for the
+ device.
+ - vdd-supply: phandle to the regulator that provides power to the sensor.
+ - vddio-supply: phandle to the regulator that provides power to the bus.
+
+Optional properties:
+ - reset-gpios : gpio used to reset the device, see gpio/gpio.txt
+ - interrupts : device support 2 interrupts, INT1 and INT2,
+ the interrupts can be triggered on rising or falling edges.
+ See interrupt-controller/interrupts.txt
+ - interrupt-names: should contain "INT1" or "INT2", the gyroscope interrupt
+ line in use.
+ - drive-open-drain: the interrupt/data ready line will be configured
+ as open drain, which is useful if several sensors share
+ the same interrupt line. This is a boolean property.
+ (This binding is taken from pinctrl/pinctrl-bindings.txt)
+
+Example:
+
+gyroscope@20 {
+ compatible = "nxp,fxas21002c";
+ reg = <0x20>;
+ vdd-supply = <&reg_peri_3p15v>;
+ vddio-supply = <&reg_peri_3p15v>;
+};
diff --git a/dts/Bindings/iio/imu/adi,adis16480.txt b/dts/Bindings/iio/imu/adi,adis16480.txt
new file mode 100644
index 0000000..ed7783f
--- /dev/null
+++ b/dts/Bindings/iio/imu/adi,adis16480.txt
@@ -0,0 +1,85 @@
+
+Analog Devices ADIS16480 and similar IMUs
+
+Required properties for the ADIS16480:
+
+- compatible: Must be one of
+ * "adi,adis16375"
+ * "adi,adis16480"
+ * "adi,adis16485"
+ * "adi,adis16488"
+ * "adi,adis16495-1"
+ * "adi,adis16495-2"
+ * "adi,adis16495-3"
+ * "adi,adis16497-1"
+ * "adi,adis16497-2"
+ * "adi,adis16497-3"
+- reg: SPI chip select number for the device
+- spi-max-frequency: Max SPI frequency to use
+ see: Documentation/devicetree/bindings/spi/spi-bus.txt
+- spi-cpha: See Documentation/devicetree/bindings/spi/spi-bus.txt
+- spi-cpol: See Documentation/devicetree/bindings/spi/spi-bus.txt
+- interrupts: interrupt mapping for IRQ, accepted values are:
+ * IRQF_TRIGGER_RISING
+ * IRQF_TRIGGER_FALLING
+
+Optional properties:
+
+- interrupt-names: Data ready line selection. Valid values are:
+ * DIO1
+ * DIO2
+ * DIO3
+ * DIO4
+ If this field is left empty, DIO1 is assigned as default data ready
+ signal.
+- reset-gpios: must be the device tree identifier of the RESET pin. As the line
+ is active low, it should be marked GPIO_ACTIVE_LOW.
+- clocks: phandle to the external clock. Should be set according to
+ "clock-names".
+ If this field is left empty together with the "clock-names" field, then
+ the internal clock is used.
+- clock-names: The name of the external clock to be used. Valid values are:
+ * sync: In sync mode, the internal clock is disabled and the frequency
+ of the external clock signal establishes therate of data
+ collection and processing. See Fig 14 and 15 in the datasheet.
+ The clock-frequency must be:
+ * 3000 to 4500 Hz for adis1649x devices.
+ * 700 to 2400 Hz for adis1648x devices.
+ * pps: In Pulse Per Second (PPS) Mode, the rate of data collection and
+ production is equal to the product of the external clock
+ frequency and the scale factor in the SYNC_SCALE register, see
+ Table 154 in the datasheet.
+ The clock-frequency must be:
+ * 1 to 128 Hz for adis1649x devices.
+ * This mode is not supported by adis1648x devices.
+ If this field is left empty together with the "clocks" field, then the
+ internal clock is used.
+- adi,ext-clk-pin: The DIOx line to be used as an external clock input.
+ Valid values are:
+ * DIO1
+ * DIO2
+ * DIO3
+ * DIO4
+ Each DIOx pin supports only one function at a time (data ready line
+ selection or external clock input). When a single pin has two
+ two assignments, the enable bit for the lower priority function
+ automatically resets to zero (disabling the lower priority function).
+ Data ready has highest priority.
+ If this field is left empty, DIO2 is assigned as default external clock
+ input pin.
+
+Example:
+
+ imu@0 {
+ compatible = "adi,adis16495-1";
+ reg = <0>;
+ spi-max-frequency = <3200000>;
+ spi-cpol;
+ spi-cpha;
+ interrupts = <25 IRQF_TRIGGER_FALLING>;
+ interrupt-parent = <&gpio>;
+ interrupt-names = "DIO2";
+ clocks = <&adis16495_sync>;
+ clock-names = "sync";
+ adi,ext-clk-pin = "DIO1";
+ };
diff --git a/dts/Bindings/iio/imu/st_lsm6dsx.txt b/dts/Bindings/iio/imu/st_lsm6dsx.txt
index 69d53d9..efec9ec 100644
--- a/dts/Bindings/iio/imu/st_lsm6dsx.txt
+++ b/dts/Bindings/iio/imu/st_lsm6dsx.txt
@@ -8,6 +8,9 @@ Required properties:
"st,lsm6dsm"
"st,ism330dlc"
"st,lsm6dso"
+ "st,asm330lhh"
+ "st,lsm6dsox"
+ "st,lsm6dsr"
- reg: i2c address of the sensor / spi cs line
Optional properties:
diff --git a/dts/Bindings/iio/light/vcnl4000.txt b/dts/Bindings/iio/light/vcnl4000.txt
new file mode 100644
index 0000000..955af45
--- /dev/null
+++ b/dts/Bindings/iio/light/vcnl4000.txt
@@ -0,0 +1,24 @@
+VISHAY VCNL4000 - Ambient Light and proximity sensor
+
+This driver supports the VCNL4000/10/20/40 and VCNL4200 chips
+
+Required properties:
+
+ -compatible: must be one of :
+ vishay,vcnl4000
+ vishay,vcnl4010
+ vishay,vcnl4020
+ vishay,vcnl4040
+ vishay,vcnl4200
+
+ -reg: I2C address of the sensor, should be one from below based on the model:
+ 0x13
+ 0x51
+ 0x60
+
+Example:
+
+light-sensor@51 {
+ compatible = "vishay,vcnl4200";
+ reg = <0x51>;
+};
diff --git a/dts/Bindings/iio/pressure/bmp085.txt b/dts/Bindings/iio/pressure/bmp085.txt
deleted file mode 100644
index 61c72e6..0000000
--- a/dts/Bindings/iio/pressure/bmp085.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-BMP085/BMP18x/BMP28x digital pressure sensors
-
-Required properties:
-- compatible: must be one of:
- "bosch,bmp085"
- "bosch,bmp180"
- "bosch,bmp280"
- "bosch,bme280"
-
-Optional properties:
-- interrupts: interrupt mapping for IRQ
-- reset-gpios: a GPIO line handling reset of the sensor: as the line is
- active low, it should be marked GPIO_ACTIVE_LOW (see gpio/gpio.txt)
-- vddd-supply: digital voltage regulator (see regulator/regulator.txt)
-- vdda-supply: analog voltage regulator (see regulator/regulator.txt)
-
-Example:
-
-pressure@77 {
- compatible = "bosch,bmp085";
- reg = <0x77>;
- interrupt-parent = <&gpio0>;
- interrupts = <25 IRQ_TYPE_EDGE_RISING>;
- reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
- vddd-supply = <&foo>;
- vdda-supply = <&bar>;
-};
diff --git a/dts/Bindings/iio/pressure/bmp085.yaml b/dts/Bindings/iio/pressure/bmp085.yaml
new file mode 100644
index 0000000..c6721a7
--- /dev/null
+++ b/dts/Bindings/iio/pressure/bmp085.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/pressure/bmp085.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BMP085/BMP180/BMP280/BME280 pressure iio sensors
+
+maintainers:
+ - Andreas Klinger <ak@it-klinger.de>
+
+description: |
+ Pressure, temperature and humidity iio sensors with i2c and spi interfaces
+
+ Specifications about the sensor can be found at:
+ https://www.bosch-sensortec.com/bst/products/all_products/bmp180
+ https://www.bosch-sensortec.com/bst/products/all_products/bmp280
+ https://www.bosch-sensortec.com/bst/products/all_products/bme280
+
+properties:
+ compatible:
+ enum:
+ - bosch,bmp085
+ - bosch,bmp180
+ - bosch,bmp280
+ - bosch,bme280
+
+ vddd-supply:
+ description:
+ digital voltage regulator (see regulator/regulator.txt)
+ maxItems: 1
+
+ vdda-supply:
+ description:
+ analog voltage regulator (see regulator/regulator.txt)
+ maxItems: 1
+
+ reset-gpios:
+ description:
+ A GPIO line handling reset of the sensor. As the line is active low,
+ it should be marked GPIO_ACTIVE_LOW (see gpio/gpio.txt)
+ maxItems: 1
+
+ interrupts:
+ description:
+ interrupt mapping for IRQ (BMP085 only)
+ maxItems: 1
+
+required:
+ - compatible
+ - vddd-supply
+ - vdda-supply
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pressure@77 {
+ compatible = "bosch,bmp085";
+ reg = <0x77>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+ reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+ vddd-supply = <&foo>;
+ vdda-supply = <&bar>;
+ };
+ };
diff --git a/dts/Bindings/iio/proximity/devantech-srf04.txt b/dts/Bindings/iio/proximity/devantech-srf04.txt
deleted file mode 100644
index d4dc7a2..0000000
--- a/dts/Bindings/iio/proximity/devantech-srf04.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-* Devantech SRF04 ultrasonic range finder
- Bit-banging driver using two GPIOs
-
-Required properties:
- - compatible: Should be "devantech,srf04"
-
- - trig-gpios: Definition of the GPIO for the triggering (output)
- This GPIO is set for about 10 us by the driver to tell the
- device it should initiate the measurement cycle.
-
- - echo-gpios: Definition of the GPIO for the echo (input)
- This GPIO is set by the device as soon as an ultrasonic
- burst is sent out and reset when the first echo is
- received.
- Thus this GPIO is set while the ultrasonic waves are doing
- one round trip.
- It needs to be an GPIO which is able to deliver an
- interrupt because the time between two interrupts is
- measured in the driver.
- See Documentation/devicetree/bindings/gpio/gpio.txt for
- information on how to specify a consumer gpio.
-
-Example:
-srf04@0 {
- compatible = "devantech,srf04";
- trig-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
- echo-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
-};
diff --git a/dts/Bindings/iio/proximity/devantech-srf04.yaml b/dts/Bindings/iio/proximity/devantech-srf04.yaml
new file mode 100644
index 0000000..4e80ea7
--- /dev/null
+++ b/dts/Bindings/iio/proximity/devantech-srf04.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/proximity/devantech-srf04.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Devantech SRF04 and Maxbotix mb1000 ultrasonic range finder
+
+maintainers:
+ - Andreas Klinger <ak@it-klinger.de>
+
+description: |
+ Bit-banging driver using two GPIOs:
+ - trigger-gpio is raised by the driver to start sending out an ultrasonic
+ burst
+ - echo-gpio is held high by the sensor after sending ultrasonic burst
+ until it is received once again
+
+ Specifications about the devices can be found at:
+ http://www.robot-electronics.co.uk/htm/srf04tech.htm
+
+ http://www.maxbotix.com/documents/LV-MaxSonar-EZ_Datasheet.pdf
+
+properties:
+ compatible:
+ enum:
+ - devantech,srf04
+ - maxbotix,mb1000
+ - maxbotix,mb1010
+ - maxbotix,mb1020
+ - maxbotix,mb1030
+ - maxbotix,mb1040
+
+ trig-gpios:
+ description:
+ Definition of the GPIO for the triggering (output)
+ This GPIO is set for about 10 us by the driver to tell the device it
+ should initiate the measurement cycle.
+ See Documentation/devicetree/bindings/gpio/gpio.txt for information
+ on how to specify a consumer gpio.
+ maxItems: 1
+
+ echo-gpios:
+ description:
+ Definition of the GPIO for the echo (input)
+ This GPIO is set by the device as soon as an ultrasonic burst is sent
+ out and reset when the first echo is received.
+ Thus this GPIO is set while the ultrasonic waves are doing one round
+ trip.
+ It needs to be an GPIO which is able to deliver an interrupt because
+ the time between two interrupts is measured in the driver.
+ maxItems: 1
+
+required:
+ - compatible
+ - trig-gpios
+ - echo-gpios
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ proximity {
+ compatible = "devantech,srf04";
+ trig-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+ echo-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+ };
diff --git a/dts/Bindings/iio/proximity/maxbotix,mb1232.txt b/dts/Bindings/iio/proximity/maxbotix,mb1232.txt
new file mode 100644
index 0000000..dd1058f
--- /dev/null
+++ b/dts/Bindings/iio/proximity/maxbotix,mb1232.txt
@@ -0,0 +1,29 @@
+* MaxBotix I2CXL-MaxSonar ultrasonic distance sensor of type mb1202,
+ mb1212, mb1222, mb1232, mb1242, mb7040 or mb7137 using the i2c interface
+ for ranging
+
+Required properties:
+ - compatible: "maxbotix,mb1202",
+ "maxbotix,mb1212",
+ "maxbotix,mb1222",
+ "maxbotix,mb1232",
+ "maxbotix,mb1242",
+ "maxbotix,mb7040" or
+ "maxbotix,mb7137"
+
+ - reg: i2c address of the device, see also i2c/i2c.txt
+
+Optional properties:
+ - interrupts: Interrupt used to announce the preceding reading
+ request has finished and that data is available.
+ If no interrupt is specified the device driver
+ falls back to wait a fixed amount of time until
+ data can be retrieved.
+
+Example:
+proximity@70 {
+ compatible = "maxbotix,mb1232";
+ reg = <0x70>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+};
diff --git a/dts/Bindings/iio/st-sensors.txt b/dts/Bindings/iio/st-sensors.txt
index 52ee4ba..0ef64a4 100644
--- a/dts/Bindings/iio/st-sensors.txt
+++ b/dts/Bindings/iio/st-sensors.txt
@@ -49,6 +49,7 @@ Accelerometers:
- st,lis2dw12
- st,lis3dhh
- st,lis3de
+- st,lis2de12
Gyroscopes:
- st,l3g4200d-gyro
diff --git a/dts/Bindings/iio/temperature/max31856.txt b/dts/Bindings/iio/temperature/max31856.txt
new file mode 100644
index 0000000..06ab43b
--- /dev/null
+++ b/dts/Bindings/iio/temperature/max31856.txt
@@ -0,0 +1,24 @@
+Maxim MAX31856 thermocouple support
+
+https://datasheets.maximintegrated.com/en/ds/MAX31856.pdf
+
+Optional property:
+ - thermocouple-type: Type of thermocouple (THERMOCOUPLE_TYPE_K if
+ omitted). Supported types are B, E, J, K, N, R, S, T.
+
+Required properties:
+ - compatible: must be "maxim,max31856"
+ - reg: SPI chip select number for the device
+ - spi-max-frequency: As per datasheet max. supported freq is 5000000
+ - spi-cpha: must be defined for max31856 to enable SPI mode 1
+
+ Refer to spi/spi-bus.txt for generic SPI slave bindings.
+
+ Example:
+ temp-sensor@0 {
+ compatible = "maxim,max31856";
+ reg = <0>;
+ spi-max-frequency = <5000000>;
+ spi-cpha;
+ thermocouple-type = <THERMOCOUPLE_TYPE_K>;
+ };
diff --git a/dts/Bindings/iio/temperature/temperature-bindings.txt b/dts/Bindings/iio/temperature/temperature-bindings.txt
new file mode 100644
index 0000000..8f339ca
--- /dev/null
+++ b/dts/Bindings/iio/temperature/temperature-bindings.txt
@@ -0,0 +1,7 @@
+If the temperature sensor device can be configured to use some specific
+thermocouple type, you can use the defined types provided in the file
+"include/dt-bindings/iio/temperature/thermocouple.h".
+
+Property:
+thermocouple-type: A single cell representing the type of the thermocouple
+ used by the device.