diff options
Diffstat (limited to 'dts/Bindings/mmc')
22 files changed, 907 insertions, 505 deletions
diff --git a/dts/Bindings/mmc/amlogic,meson-mx-sdhc.yaml b/dts/Bindings/mmc/amlogic,meson-mx-sdhc.yaml index 7a386a5b8f..0cd74c3116 100644 --- a/dts/Bindings/mmc/amlogic,meson-mx-sdhc.yaml +++ b/dts/Bindings/mmc/amlogic,meson-mx-sdhc.yaml @@ -21,9 +21,9 @@ properties: compatible: items: - enum: - - amlogic,meson8-sdhc - - amlogic,meson8b-sdhc - - amlogic,meson8m2-sdhc + - amlogic,meson8-sdhc + - amlogic,meson8b-sdhc + - amlogic,meson8m2-sdhc - const: amlogic,meson-mx-sdhc reg: diff --git a/dts/Bindings/mmc/arasan,sdhci.txt b/dts/Bindings/mmc/arasan,sdhci.txt deleted file mode 100644 index f29bf7dd2e..0000000000 --- a/dts/Bindings/mmc/arasan,sdhci.txt +++ /dev/null @@ -1,192 +0,0 @@ -Device Tree Bindings for the Arasan SDHCI Controller - - The bindings follow the mmc[1], clock[2], interrupt[3] and phy[4] bindings. - Only deviations are documented here. - - [1] Documentation/devicetree/bindings/mmc/mmc.txt - [2] Documentation/devicetree/bindings/clock/clock-bindings.txt - [3] Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - [4] Documentation/devicetree/bindings/phy/phy-bindings.txt - -Required Properties: - - compatible: Compatibility string. One of: - - "arasan,sdhci-8.9a": generic Arasan SDHCI 8.9a PHY - - "arasan,sdhci-4.9a": generic Arasan SDHCI 4.9a PHY - - "arasan,sdhci-5.1": generic Arasan SDHCI 5.1 PHY - - "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1": rk3399 eMMC PHY - For this device it is strongly suggested to include arasan,soc-ctl-syscon. - - "xlnx,zynqmp-8.9a": ZynqMP SDHCI 8.9a PHY - For this device it is strongly suggested to include clock-output-names and - #clock-cells. - - "xlnx,versal-8.9a": Versal SDHCI 8.9a PHY - For this device it is strongly suggested to include clock-output-names and - #clock-cells. - - "ti,am654-sdhci-5.1", "arasan,sdhci-5.1": TI AM654 MMC PHY - Note: This binding has been deprecated and moved to [5]. - - "intel,lgm-sdhci-5.1-emmc", "arasan,sdhci-5.1": Intel LGM eMMC PHY - For this device it is strongly suggested to include arasan,soc-ctl-syscon. - - "intel,lgm-sdhci-5.1-sdxc", "arasan,sdhci-5.1": Intel LGM SDXC PHY - For this device it is strongly suggested to include arasan,soc-ctl-syscon. - - "intel,keembay-sdhci-5.1-emmc", "arasan,sdhci-5.1": Intel Keem Bay eMMC - For this device it is strongly suggested to include arasan,soc-ctl-syscon. - - "intel,keembay-sdhci-5.1-sd": Intel Keem Bay SD controller - For this device it is strongly suggested to include arasan,soc-ctl-syscon. - - "intel,keembay-sdhci-5.1-sdio": Intel Keem Bay SDIO controller - For this device it is strongly suggested to include arasan,soc-ctl-syscon. - - [5] Documentation/devicetree/bindings/mmc/sdhci-am654.txt - - - reg: From mmc bindings: Register location and length. - - clocks: From clock bindings: Handles to clock inputs. - - clock-names: From clock bindings: Tuple including "clk_xin" and "clk_ahb" - - interrupts: Interrupt specifier - -Required Properties for "arasan,sdhci-5.1": - - phys: From PHY bindings: Phandle for the Generic PHY for arasan. - - phy-names: MUST be "phy_arasan". - -Optional Properties: - - arasan,soc-ctl-syscon: A phandle to a syscon device (see ../mfd/syscon.txt) - used to access core corecfg registers. Offsets of registers in this - syscon are determined based on the main compatible string for the device. - - clock-output-names: If specified, this will be the name of the card clock - which will be exposed by this device. Required if #clock-cells is - specified. - - #clock-cells: If specified this should be the value <0> or <1>. With this - property in place we will export one or two clocks representing the Card - Clock. These clocks are expected to be consumed by our PHY. - - xlnx,fails-without-test-cd: when present, the controller doesn't work when - the CD line is not connected properly, and the line is not connected - properly. Test mode can be used to force the controller to function. - - xlnx,int-clock-stable-broken: when present, the controller always reports - that the internal clock is stable even when it is not. - - - xlnx,mio-bank: When specified, this will indicate the MIO bank number in - which the command and data lines are configured. If not specified, driver - will assume this as 0. - -Example: - sdhci@e0100000 { - compatible = "arasan,sdhci-8.9a"; - reg = <0xe0100000 0x1000>; - clock-names = "clk_xin", "clk_ahb"; - clocks = <&clkc 21>, <&clkc 32>; - interrupt-parent = <&gic>; - interrupts = <0 24 4>; - } ; - - sdhci@e2800000 { - compatible = "arasan,sdhci-5.1"; - reg = <0xe2800000 0x1000>; - clock-names = "clk_xin", "clk_ahb"; - clocks = <&cru 8>, <&cru 18>; - interrupt-parent = <&gic>; - interrupts = <0 24 4>; - phys = <&emmc_phy>; - phy-names = "phy_arasan"; - } ; - - sdhci: sdhci@fe330000 { - compatible = "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1"; - reg = <0x0 0xfe330000 0x0 0x10000>; - interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru SCLK_EMMC>, <&cru ACLK_EMMC>; - clock-names = "clk_xin", "clk_ahb"; - arasan,soc-ctl-syscon = <&grf>; - assigned-clocks = <&cru SCLK_EMMC>; - assigned-clock-rates = <200000000>; - clock-output-names = "emmc_cardclock"; - phys = <&emmc_phy>; - phy-names = "phy_arasan"; - #clock-cells = <0>; - }; - - sdhci: mmc@ff160000 { - compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a"; - interrupt-parent = <&gic>; - interrupts = <0 48 4>; - reg = <0x0 0xff160000 0x0 0x1000>; - clocks = <&clk200>, <&clk200>; - clock-names = "clk_xin", "clk_ahb"; - clock-output-names = "clk_out_sd0", "clk_in_sd0"; - #clock-cells = <1>; - clk-phase-sd-hs = <63>, <72>; - }; - - sdhci: mmc@f1040000 { - compatible = "xlnx,versal-8.9a", "arasan,sdhci-8.9a"; - interrupt-parent = <&gic>; - interrupts = <0 126 4>; - reg = <0x0 0xf1040000 0x0 0x10000>; - clocks = <&clk200>, <&clk200>; - clock-names = "clk_xin", "clk_ahb"; - clock-output-names = "clk_out_sd0", "clk_in_sd0"; - #clock-cells = <1>; - clk-phase-sd-hs = <132>, <60>; - }; - - emmc: sdhci@ec700000 { - compatible = "intel,lgm-sdhci-5.1-emmc", "arasan,sdhci-5.1"; - reg = <0xec700000 0x300>; - interrupt-parent = <&ioapic1>; - interrupts = <44 1>; - clocks = <&cgu0 LGM_CLK_EMMC5>, <&cgu0 LGM_CLK_NGI>, - <&cgu0 LGM_GCLK_EMMC>; - clock-names = "clk_xin", "clk_ahb", "gate"; - clock-output-names = "emmc_cardclock"; - #clock-cells = <0>; - phys = <&emmc_phy>; - phy-names = "phy_arasan"; - arasan,soc-ctl-syscon = <&sysconf>; - }; - - sdxc: sdhci@ec600000 { - compatible = "arasan,sdhci-5.1", "intel,lgm-sdhci-5.1-sdxc"; - reg = <0xec600000 0x300>; - interrupt-parent = <&ioapic1>; - interrupts = <43 1>; - clocks = <&cgu0 LGM_CLK_SDIO>, <&cgu0 LGM_CLK_NGI>, - <&cgu0 LGM_GCLK_SDXC>; - clock-names = "clk_xin", "clk_ahb", "gate"; - clock-output-names = "sdxc_cardclock"; - #clock-cells = <0>; - phys = <&sdxc_phy>; - phy-names = "phy_arasan"; - arasan,soc-ctl-syscon = <&sysconf>; - }; - - mmc: mmc@33000000 { - compatible = "intel,keembay-sdhci-5.1-emmc", "arasan,sdhci-5.1"; - interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x33000000 0x0 0x300>; - clock-names = "clk_xin", "clk_ahb"; - clocks = <&scmi_clk KEEM_BAY_PSS_AUX_EMMC>, - <&scmi_clk KEEM_BAY_PSS_EMMC>; - phys = <&emmc_phy>; - phy-names = "phy_arasan"; - assigned-clocks = <&scmi_clk KEEM_BAY_PSS_AUX_EMMC>; - assigned-clock-rates = <200000000>; - clock-output-names = "emmc_cardclock"; - #clock-cells = <0>; - arasan,soc-ctl-syscon = <&mmc_phy_syscon>; - }; - - sd0: mmc@31000000 { - compatible = "intel,keembay-sdhci-5.1-sd"; - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x31000000 0x0 0x300>; - clock-names = "clk_xin", "clk_ahb"; - clocks = <&scmi_clk KEEM_BAY_PSS_AUX_SD0>, - <&scmi_clk KEEM_BAY_PSS_SD0>; - arasan,soc-ctl-syscon = <&sd0_phy_syscon>; - }; - - sd1: mmc@32000000 { - compatible = "intel,keembay-sdhci-5.1-sdio"; - interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x32000000 0x0 0x300>; - clock-names = "clk_xin", "clk_ahb"; - clocks = <&scmi_clk KEEM_BAY_PSS_AUX_SD1>, - <&scmi_clk KEEM_BAY_PSS_SD1>; - arasan,soc-ctl-syscon = <&sd1_phy_syscon>; - }; diff --git a/dts/Bindings/mmc/arasan,sdhci.yaml b/dts/Bindings/mmc/arasan,sdhci.yaml new file mode 100644 index 0000000000..5887c917d4 --- /dev/null +++ b/dts/Bindings/mmc/arasan,sdhci.yaml @@ -0,0 +1,299 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/mmc/arasan,sdhci.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Device Tree Bindings for the Arasan SDHCI Controller + +maintainers: + - Adrian Hunter <adrian.hunter@intel.com> + +allOf: + - $ref: "mmc-controller.yaml#" + - if: + properties: + compatible: + contains: + const: arasan,sdhci-5.1 + then: + required: + - phys + - phy-names + - if: + properties: + compatible: + contains: + enum: + - xlnx,zynqmp-8.9a + - xlnx,versal-8.9a + then: + properties: + clock-output-names: + items: + - const: clk_out_sd0 + - const: clk_in_sd0 + +properties: + compatible: + oneOf: + - const: arasan,sdhci-8.9a # generic Arasan SDHCI 8.9a PHY + - const: arasan,sdhci-4.9a # generic Arasan SDHCI 4.9a PHY + - const: arasan,sdhci-5.1 # generic Arasan SDHCI 5.1 PHY + - items: + - const: rockchip,rk3399-sdhci-5.1 # rk3399 eMMC PHY + - const: arasan,sdhci-5.1 + description: + For this device it is strongly suggested to include + arasan,soc-ctl-syscon. + - items: + - const: xlnx,zynqmp-8.9a # ZynqMP SDHCI 8.9a PHY + - const: arasan,sdhci-8.9a + description: + For this device it is strongly suggested to include + clock-output-names and '#clock-cells'. + - items: + - const: xlnx,versal-8.9a # Versal SDHCI 8.9a PHY + - const: arasan,sdhci-8.9a + description: + For this device it is strongly suggested to include + clock-output-names and '#clock-cells'. + - items: + - const: intel,lgm-sdhci-5.1-emmc # Intel LGM eMMC PHY + - const: arasan,sdhci-5.1 + description: + For this device it is strongly suggested to include + arasan,soc-ctl-syscon. + - items: + - const: intel,lgm-sdhci-5.1-sdxc # Intel LGM SDXC PHY + - const: arasan,sdhci-5.1 + description: + For this device it is strongly suggested to include + arasan,soc-ctl-syscon. + - items: + - const: intel,keembay-sdhci-5.1-emmc # Intel Keem Bay eMMC PHY + - const: arasan,sdhci-5.1 + description: + For this device it is strongly suggested to include + arasan,soc-ctl-syscon. + - const: intel,keembay-sdhci-5.1-sd # Intel Keem Bay SD controller + description: + For this device it is strongly suggested to include + arasan,soc-ctl-syscon. + - const: intel,keembay-sdhci-5.1-sdio # Intel Keem Bay SDIO controller + description: + For this device it is strongly suggested to include + arasan,soc-ctl-syscon. + + reg: + maxItems: 1 + + clocks: + minItems: 2 + maxItems: 3 + + clock-names: + minItems: 2 + items: + - const: clk_xin + - const: clk_ahb + - const: gate + + interrupts: + maxItems: 1 + + phys: + maxItems: 1 + + phy-names: + const: phy_arasan + + arasan,soc-ctl-syscon: + $ref: /schemas/types.yaml#/definitions/phandle + description: + A phandle to a syscon device (see ../mfd/syscon.txt) used to access + core corecfg registers. Offsets of registers in this syscon are + determined based on the main compatible string for the device. + + clock-output-names: + minItems: 1 + maxItems: 2 + description: + Name of the card clock which will be exposed by this device. + + '#clock-cells': + enum: [0, 1] + description: + With this property in place we will export one or two clocks + representing the Card Clock. These clocks are expected to be + consumed by our PHY. + + xlnx,fails-without-test-cd: + $ref: /schemas/types.yaml#/definitions/flag + description: + When present, the controller doesn't work when the CD line is not + connected properly, and the line is not connected properly. + Test mode can be used to force the controller to function. + + xlnx,int-clock-stable-broken: + $ref: /schemas/types.yaml#/definitions/flag + description: + When present, the controller always reports that the internal clock + is stable even when it is not. + + xlnx,mio-bank: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 2] + default: 0 + description: + The MIO bank number in which the command and data lines are configured. + +dependencies: + clock-output-names: [ '#clock-cells' ] + '#clock-cells': [ clock-output-names ] + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + mmc@e0100000 { + compatible = "arasan,sdhci-8.9a"; + reg = <0xe0100000 0x1000>; + clock-names = "clk_xin", "clk_ahb"; + clocks = <&clkc 21>, <&clkc 32>; + interrupt-parent = <&gic>; + interrupts = <0 24 4>; + }; + + - | + mmc@e2800000 { + compatible = "arasan,sdhci-5.1"; + reg = <0xe2800000 0x1000>; + clock-names = "clk_xin", "clk_ahb"; + clocks = <&cru 8>, <&cru 18>; + interrupt-parent = <&gic>; + interrupts = <0 24 4>; + phys = <&emmc_phy>; + phy-names = "phy_arasan"; + }; + + - | + #include <dt-bindings/clock/rk3399-cru.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + mmc@fe330000 { + compatible = "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1"; + reg = <0xfe330000 0x10000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_EMMC>, <&cru ACLK_EMMC>; + clock-names = "clk_xin", "clk_ahb"; + arasan,soc-ctl-syscon = <&grf>; + assigned-clocks = <&cru SCLK_EMMC>; + assigned-clock-rates = <200000000>; + clock-output-names = "emmc_cardclock"; + phys = <&emmc_phy>; + phy-names = "phy_arasan"; + #clock-cells = <0>; + }; + + - | + mmc@ff160000 { + compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a"; + interrupt-parent = <&gic>; + interrupts = <0 48 4>; + reg = <0xff160000 0x1000>; + clocks = <&clk200>, <&clk200>; + clock-names = "clk_xin", "clk_ahb"; + clock-output-names = "clk_out_sd0", "clk_in_sd0"; + #clock-cells = <1>; + clk-phase-sd-hs = <63>, <72>; + }; + + - | + mmc@f1040000 { + compatible = "xlnx,versal-8.9a", "arasan,sdhci-8.9a"; + interrupt-parent = <&gic>; + interrupts = <0 126 4>; + reg = <0xf1040000 0x10000>; + clocks = <&clk200>, <&clk200>; + clock-names = "clk_xin", "clk_ahb"; + clock-output-names = "clk_out_sd0", "clk_in_sd0"; + #clock-cells = <1>; + clk-phase-sd-hs = <132>, <60>; + }; + + - | + #define LGM_CLK_EMMC5 + #define LGM_CLK_NGI + #define LGM_GCLK_EMMC + mmc@ec700000 { + compatible = "intel,lgm-sdhci-5.1-emmc", "arasan,sdhci-5.1"; + reg = <0xec700000 0x300>; + interrupt-parent = <&ioapic1>; + interrupts = <44 1>; + clocks = <&cgu0 LGM_CLK_EMMC5>, <&cgu0 LGM_CLK_NGI>, + <&cgu0 LGM_GCLK_EMMC>; + clock-names = "clk_xin", "clk_ahb", "gate"; + clock-output-names = "emmc_cardclock"; + #clock-cells = <0>; + phys = <&emmc_phy>; + phy-names = "phy_arasan"; + arasan,soc-ctl-syscon = <&sysconf>; + }; + + - | + #define LGM_CLK_SDIO + #define LGM_GCLK_SDXC + mmc@ec600000 { + compatible = "intel,lgm-sdhci-5.1-sdxc", "arasan,sdhci-5.1"; + reg = <0xec600000 0x300>; + interrupt-parent = <&ioapic1>; + interrupts = <43 1>; + clocks = <&cgu0 LGM_CLK_SDIO>, <&cgu0 LGM_CLK_NGI>, + <&cgu0 LGM_GCLK_SDXC>; + clock-names = "clk_xin", "clk_ahb", "gate"; + clock-output-names = "sdxc_cardclock"; + #clock-cells = <0>; + phys = <&sdxc_phy>; + phy-names = "phy_arasan"; + arasan,soc-ctl-syscon = <&sysconf>; + }; + + - | + #define KEEM_BAY_PSS_AUX_EMMC + #define KEEM_BAY_PSS_EMMC + mmc@33000000 { + compatible = "intel,keembay-sdhci-5.1-emmc", "arasan,sdhci-5.1"; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x33000000 0x300>; + clock-names = "clk_xin", "clk_ahb"; + clocks = <&scmi_clk KEEM_BAY_PSS_AUX_EMMC>, + <&scmi_clk KEEM_BAY_PSS_EMMC>; + phys = <&emmc_phy>; + phy-names = "phy_arasan"; + assigned-clocks = <&scmi_clk KEEM_BAY_PSS_AUX_EMMC>; + assigned-clock-rates = <200000000>; + clock-output-names = "emmc_cardclock"; + #clock-cells = <0>; + arasan,soc-ctl-syscon = <&mmc_phy_syscon>; + }; + + - | + #define KEEM_BAY_PSS_AUX_SD0 + #define KEEM_BAY_PSS_SD0 + mmc@31000000 { + compatible = "intel,keembay-sdhci-5.1-sd"; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x31000000 0x300>; + clock-names = "clk_xin", "clk_ahb"; + clocks = <&scmi_clk KEEM_BAY_PSS_AUX_SD0>, + <&scmi_clk KEEM_BAY_PSS_SD0>; + arasan,soc-ctl-syscon = <&sd0_phy_syscon>; + }; diff --git a/dts/Bindings/mmc/fsl-imx-esdhc.txt b/dts/Bindings/mmc/fsl-imx-esdhc.txt deleted file mode 100644 index de1b8bd550..0000000000 --- a/dts/Bindings/mmc/fsl-imx-esdhc.txt +++ /dev/null @@ -1,67 +0,0 @@ -* Freescale Enhanced Secure Digital Host Controller (eSDHC) for i.MX - -The Enhanced Secure Digital Host Controller on Freescale i.MX family -provides an interface for MMC, SD, and SDIO types of memory cards. - -This file documents differences between the core properties described -by mmc.txt and the properties used by the sdhci-esdhc-imx driver. - -Required properties: -- compatible : Should be "fsl,<chip>-esdhc", the supported chips include - "fsl,imx25-esdhc" - "fsl,imx35-esdhc" - "fsl,imx51-esdhc" - "fsl,imx53-esdhc" - "fsl,imx6q-usdhc" - "fsl,imx6sl-usdhc" - "fsl,imx6sx-usdhc" - "fsl,imx6ull-usdhc" - "fsl,imx7d-usdhc" - "fsl,imx7ulp-usdhc" - "fsl,imx8mq-usdhc" - "fsl,imx8mm-usdhc" - "fsl,imx8mn-usdhc" - "fsl,imx8mp-usdhc" - "fsl,imx8qm-usdhc" - "fsl,imx8qxp-usdhc" - -Optional properties: -- fsl,wp-controller : Indicate to use controller internal write protection -- fsl,delay-line : Specify the number of delay cells for override mode. - This is used to set the clock delay for DLL(Delay Line) on override mode - to select a proper data sampling window in case the clock quality is not good - due to signal path is too long on the board. Please refer to eSDHC/uSDHC - chapter, DLL (Delay Line) section in RM for details. -- voltage-ranges : Specify the voltage range in case there are software - transparent level shifters on the outputs of the controller. Two cells are - required, first cell specifies minimum slot voltage (mV), second cell - specifies maximum slot voltage (mV). Several ranges could be specified. -- fsl,tuning-start-tap: Specify the start dealy cell point when send first CMD19 - in tuning procedure. -- fsl,tuning-step: Specify the increasing delay cell steps in tuning procedure. - The uSDHC use one delay cell as default increasing step to do tuning process. - This property allows user to change the tuning step to more than one delay - cells which is useful for some special boards or cards when the default - tuning step can't find the proper delay window within limited tuning retries. -- fsl,strobe-dll-delay-target: Specify the strobe dll control slave delay target. - This delay target programming host controller loopback read clock, and this - property allows user to change the delay target for the strobe input read clock. - If not use this property, driver default set the delay target to value 7. - Only eMMC HS400 mode need to take care of this property. - -Examples: - -esdhc@70004000 { - compatible = "fsl,imx51-esdhc"; - reg = <0x70004000 0x4000>; - interrupts = <1>; - fsl,wp-controller; -}; - -esdhc@70008000 { - compatible = "fsl,imx51-esdhc"; - reg = <0x70008000 0x4000>; - interrupts = <2>; - cd-gpios = <&gpio1 6 0>; /* GPIO1_6 */ - wp-gpios = <&gpio1 5 0>; /* GPIO1_5 */ -}; diff --git a/dts/Bindings/mmc/fsl-imx-esdhc.yaml b/dts/Bindings/mmc/fsl-imx-esdhc.yaml new file mode 100644 index 0000000000..75dc1168d7 --- /dev/null +++ b/dts/Bindings/mmc/fsl-imx-esdhc.yaml @@ -0,0 +1,124 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/fsl-imx-esdhc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Enhanced Secure Digital Host Controller (eSDHC) for i.MX + +maintainers: + - Shawn Guo <shawn.guo@linaro.org> + +allOf: + - $ref: "mmc-controller.yaml" + +description: | + The Enhanced Secure Digital Host Controller on Freescale i.MX family + provides an interface for MMC, SD, and SDIO types of memory cards. + + This file documents differences between the core properties described + by mmc.txt and the properties used by the sdhci-esdhc-imx driver. + +properties: + compatible: + enum: + - fsl,imx25-esdhc + - fsl,imx35-esdhc + - fsl,imx51-esdhc + - fsl,imx53-esdhc + - fsl,imx6q-usdhc + - fsl,imx6sl-usdhc + - fsl,imx6sx-usdhc + - fsl,imx6ull-usdhc + - fsl,imx7d-usdhc + - fsl,imx7ulp-usdhc + - fsl,imx8mq-usdhc + - fsl,imx8mm-usdhc + - fsl,imx8mn-usdhc + - fsl,imx8mp-usdhc + - fsl,imx8qm-usdhc + - fsl,imx8qxp-usdhc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + fsl,wp-controller: + description: | + boolean, if present, indicate to use controller internal write protection. + type: boolean + + fsl,delay-line: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Specify the number of delay cells for override mode. + This is used to set the clock delay for DLL(Delay Line) on override mode + to select a proper data sampling window in case the clock quality is not good + due to signal path is too long on the board. Please refer to eSDHC/uSDHC + chapter, DLL (Delay Line) section in RM for details. + default: 0 + + voltage-ranges: + $ref: '/schemas/types.yaml#/definitions/uint32-matrix' + description: | + Specify the voltage range in case there are software transparent level + shifters on the outputs of the controller. Two cells are required, first + cell specifies minimum slot voltage (mV), second cell specifies maximum + slot voltage (mV). + items: + items: + - description: value for minimum slot voltage + - description: value for maximum slot voltage + maxItems: 1 + + fsl,tuning-start-tap: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Specify the start delay cell point when send first CMD19 in tuning procedure. + default: 0 + + fsl,tuning-step: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Specify the increasing delay cell steps in tuning procedure. + The uSDHC use one delay cell as default increasing step to do tuning process. + This property allows user to change the tuning step to more than one delay + cells which is useful for some special boards or cards when the default + tuning step can't find the proper delay window within limited tuning retries. + default: 0 + + fsl,strobe-dll-delay-target: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Specify the strobe dll control slave delay target. + This delay target programming host controller loopback read clock, and this + property allows user to change the delay target for the strobe input read clock. + If not use this property, driver default set the delay target to value 7. + Only eMMC HS400 mode need to take care of this property. + default: 0 + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + mmc@70004000 { + compatible = "fsl,imx51-esdhc"; + reg = <0x70004000 0x4000>; + interrupts = <1>; + fsl,wp-controller; + }; + + mmc@70008000 { + compatible = "fsl,imx51-esdhc"; + reg = <0x70008000 0x4000>; + interrupts = <2>; + cd-gpios = <&gpio1 6 0>; /* GPIO1_6 */ + wp-gpios = <&gpio1 5 0>; /* GPIO1_5 */ + }; diff --git a/dts/Bindings/mmc/fsl-imx-mmc.txt b/dts/Bindings/mmc/fsl-imx-mmc.txt deleted file mode 100644 index 184ccffe27..0000000000 --- a/dts/Bindings/mmc/fsl-imx-mmc.txt +++ /dev/null @@ -1,23 +0,0 @@ -* Freescale Secure Digital Host Controller for i.MX2/3 series - -This file documents differences to the properties defined in mmc.txt. - -Required properties: -- compatible : Should be "fsl,<chip>-mmc", chip can be imx21 or imx31 - -Optional properties: -- dmas: One DMA phandle with arguments as defined by the devicetree bindings - of the used DMA controller. -- dma-names: Has to be "rx-tx". - -Example: - -sdhci1: sdhci@10014000 { - compatible = "fsl,imx27-mmc", "fsl,imx21-mmc"; - reg = <0x10014000 0x1000>; - interrupts = <11>; - dmas = <&dma 7>; - dma-names = "rx-tx"; - bus-width = <4>; - cd-gpios = <&gpio3 29>; -}; diff --git a/dts/Bindings/mmc/fsl-imx-mmc.yaml b/dts/Bindings/mmc/fsl-imx-mmc.yaml new file mode 100644 index 0000000000..ffa162722b --- /dev/null +++ b/dts/Bindings/mmc/fsl-imx-mmc.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/fsl-imx-mmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Secure Digital Host Controller for i.MX2/3 series + +maintainers: + - Markus Pargmann <mpa@pengutronix.de> + +allOf: + - $ref: "mmc-controller.yaml" + +properties: + compatible: + oneOf: + - const: fsl,imx21-mmc + - const: fsl,imx31-mmc + - items: + - const: fsl,imx27-mmc + - const: fsl,imx21-mmc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + dmas: + maxItems: 1 + + dma-names: + const: rx-tx + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + mmc@10014000 { + compatible = "fsl,imx27-mmc", "fsl,imx21-mmc"; + reg = <0x10014000 0x1000>; + interrupts = <11>; + dmas = <&dma 7>; + dma-names = "rx-tx"; + bus-width = <4>; + cd-gpios = <&gpio3 29>; + }; diff --git a/dts/Bindings/mmc/ingenic,mmc.yaml b/dts/Bindings/mmc/ingenic,mmc.yaml index e60bfe980a..9b63df1c22 100644 --- a/dts/Bindings/mmc/ingenic,mmc.yaml +++ b/dts/Bindings/mmc/ingenic,mmc.yaml @@ -16,14 +16,14 @@ properties: compatible: oneOf: - enum: - - ingenic,jz4740-mmc - - ingenic,jz4725b-mmc - - ingenic,jz4760-mmc - - ingenic,jz4780-mmc - - ingenic,x1000-mmc + - ingenic,jz4740-mmc + - ingenic,jz4725b-mmc + - ingenic,jz4760-mmc + - ingenic,jz4780-mmc + - ingenic,x1000-mmc - items: - - const: ingenic,jz4770-mmc - - const: ingenic,jz4760-mmc + - const: ingenic,jz4770-mmc + - const: ingenic,jz4760-mmc reg: maxItems: 1 diff --git a/dts/Bindings/mmc/mmc-controller.yaml b/dts/Bindings/mmc/mmc-controller.yaml index 4931fab34d..b96da0c7f8 100644 --- a/dts/Bindings/mmc/mmc-controller.yaml +++ b/dts/Bindings/mmc/mmc-controller.yaml @@ -169,6 +169,11 @@ properties: description: Full power cycle of the card is supported. + full-pwr-cycle-in-suspend: + $ref: /schemas/types.yaml#/definitions/flag + description: + Full power cycle of the card in suspend is supported. + mmc-ddr-1_2v: $ref: /schemas/types.yaml#/definitions/flag description: diff --git a/dts/Bindings/mmc/mmc-pwrseq-emmc.txt b/dts/Bindings/mmc/mmc-pwrseq-emmc.txt deleted file mode 100644 index 3d965d57e0..0000000000 --- a/dts/Bindings/mmc/mmc-pwrseq-emmc.txt +++ /dev/null @@ -1,25 +0,0 @@ -* The simple eMMC hardware reset provider - -The purpose of this driver is to perform standard eMMC hw reset -procedure, as described by Jedec 4.4 specification. This procedure is -performed just after MMC core enabled power to the given mmc host (to -fix possible issues if bootloader has left eMMC card in initialized or -unknown state), and before performing complete system reboot (also in -case of emergency reboot call). The latter is needed on boards, which -doesn't have hardware reset logic connected to emmc card and (limited or -broken) ROM bootloaders are unable to read second stage from the emmc -card if the card is left in unknown or already initialized state. - -Required properties: -- compatible : contains "mmc-pwrseq-emmc". -- reset-gpios : contains a GPIO specifier. The reset GPIO is asserted - and then deasserted to perform eMMC card reset. To perform - reset procedure as described in Jedec 4.4 specification, the - gpio line should be defined as GPIO_ACTIVE_LOW. - -Example: - - sdhci0_pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; - } diff --git a/dts/Bindings/mmc/mmc-pwrseq-emmc.yaml b/dts/Bindings/mmc/mmc-pwrseq-emmc.yaml new file mode 100644 index 0000000000..77f746f572 --- /dev/null +++ b/dts/Bindings/mmc/mmc-pwrseq-emmc.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/mmc-pwrseq-emmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Simple eMMC hardware reset provider binding + +maintainers: + - Ulf Hansson <ulf.hansson@linaro.org> + +description: + The purpose of this driver is to perform standard eMMC hw reset + procedure, as described by Jedec 4.4 specification. This procedure is + performed just after MMC core enabled power to the given mmc host (to + fix possible issues if bootloader has left eMMC card in initialized or + unknown state), and before performing complete system reboot (also in + case of emergency reboot call). The latter is needed on boards, which + doesn't have hardware reset logic connected to emmc card and (limited or + broken) ROM bootloaders are unable to read second stage from the emmc + card if the card is left in unknown or already initialized state. + +properties: + compatible: + const: mmc-pwrseq-emmc + + reset-gpios: + minItems: 1 + description: + contains a GPIO specifier. The reset GPIO is asserted + and then deasserted to perform eMMC card reset. To perform + reset procedure as described in Jedec 4.4 specification, the + gpio line should be defined as GPIO_ACTIVE_LOW. + +required: + - compatible + - reset-gpios + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + sdhci0_pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + }; +... diff --git a/dts/Bindings/mmc/mmc-pwrseq-sd8787.txt b/dts/Bindings/mmc/mmc-pwrseq-sd8787.txt deleted file mode 100644 index 22e9340e4b..0000000000 --- a/dts/Bindings/mmc/mmc-pwrseq-sd8787.txt +++ /dev/null @@ -1,16 +0,0 @@ -* Marvell SD8787 power sequence provider - -Required properties: -- compatible: must be "mmc-pwrseq-sd8787". -- powerdown-gpios: contains a power down GPIO specifier with the - default active state -- reset-gpios: contains a reset GPIO specifier with the default - active state - -Example: - - wifi_pwrseq: wifi_pwrseq { - compatible = "mmc-pwrseq-sd8787"; - powerdown-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>; - reset-gpios = <&twl_gpio 1 GPIO_ACTIVE_LOW>; - } diff --git a/dts/Bindings/mmc/mmc-pwrseq-sd8787.yaml b/dts/Bindings/mmc/mmc-pwrseq-sd8787.yaml new file mode 100644 index 0000000000..a68820d31d --- /dev/null +++ b/dts/Bindings/mmc/mmc-pwrseq-sd8787.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/mmc-pwrseq-sd8787.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell SD8787 power sequence provider binding + +maintainers: + - Ulf Hansson <ulf.hansson@linaro.org> + +properties: + compatible: + const: mmc-pwrseq-sd8787 + + powerdown-gpios: + minItems: 1 + description: + contains a power down GPIO specifier with the default active state + + reset-gpios: + minItems: 1 + description: + contains a reset GPIO specifier with the default active state + +required: + - compatible + - powerdown-gpios + - reset-gpios + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-sd8787"; + powerdown-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>; + reset-gpios = <&twl_gpio 1 GPIO_ACTIVE_LOW>; + }; +... diff --git a/dts/Bindings/mmc/mmc-pwrseq-simple.txt b/dts/Bindings/mmc/mmc-pwrseq-simple.txt deleted file mode 100644 index 9029b45b8a..0000000000 --- a/dts/Bindings/mmc/mmc-pwrseq-simple.txt +++ /dev/null @@ -1,31 +0,0 @@ -* The simple MMC power sequence provider - -The purpose of the simple MMC power sequence provider is to supports a set of -common properties between various SOC designs. It thus enables us to use the -same provider for several SOC designs. - -Required properties: -- compatible : contains "mmc-pwrseq-simple". - -Optional properties: -- reset-gpios : contains a list of GPIO specifiers. The reset GPIOs are asserted - at initialization and prior we start the power up procedure of the card. - They will be de-asserted right after the power has been provided to the - card. -- clocks : Must contain an entry for the entry in clock-names. - See ../clocks/clock-bindings.txt for details. -- clock-names : Must include the following entry: - "ext_clock" (External clock provided to the card). -- post-power-on-delay-ms : Delay in ms after powering the card and - de-asserting the reset-gpios (if any) -- power-off-delay-us : Delay in us after asserting the reset-gpios (if any) - during power off of the card. - -Example: - - sdhci0_pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; - clocks = <&clk_32768_ck>; - clock-names = "ext_clock"; - } diff --git a/dts/Bindings/mmc/mmc-pwrseq-simple.yaml b/dts/Bindings/mmc/mmc-pwrseq-simple.yaml new file mode 100644 index 0000000000..4492154447 --- /dev/null +++ b/dts/Bindings/mmc/mmc-pwrseq-simple.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/mmc-pwrseq-simple.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Simple MMC power sequence provider binding + +maintainers: + - Ulf Hansson <ulf.hansson@linaro.org> + +description: + The purpose of the simple MMC power sequence provider is to supports a set + of common properties between various SOC designs. It thus enables us to use + the same provider for several SOC designs. + +properties: + compatible: + const: mmc-pwrseq-simple + + reset-gpios: + minItems: 1 + description: + contains a list of GPIO specifiers. The reset GPIOs are asserted + at initialization and prior we start the power up procedure of the card. + They will be de-asserted right after the power has been provided to the + card. + + clocks: + minItems: 1 + description: Handle for the entry in clock-names. + + clock-names: + items: + - const: ext_clock + description: External clock provided to the card. + + post-power-on-delay-ms: + description: + Delay in ms after powering the card and de-asserting the + reset-gpios (if any). + $ref: /schemas/types.yaml#/definitions/uint32 + + power-off-delay-us: + description: + Delay in us after asserting the reset-gpios (if any) + during power off of the card. + $ref: /schemas/types.yaml#/definitions/uint32 + +required: + - compatible + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + sdhci0_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + clocks = <&clk_32768_ck>; + clock-names = "ext_clock"; + }; +... diff --git a/dts/Bindings/mmc/mtk-sd.txt b/dts/Bindings/mmc/mtk-sd.txt index 8a532f4453..0c9cf6a880 100644 --- a/dts/Bindings/mmc/mtk-sd.txt +++ b/dts/Bindings/mmc/mtk-sd.txt @@ -12,6 +12,7 @@ Required properties: "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173 "mediatek,mt8183-mmc": for mmc host ip compatible with mt8183 "mediatek,mt8516-mmc": for mmc host ip compatible with mt8516 + "mediatek,mt6779-mmc": for mmc host ip compatible with mt6779 "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701 "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712 "mediatek,mt7622-mmc": for MT7622 SoC diff --git a/dts/Bindings/mmc/mxs-mmc.txt b/dts/Bindings/mmc/mxs-mmc.txt deleted file mode 100644 index 515addc200..0000000000 --- a/dts/Bindings/mmc/mxs-mmc.txt +++ /dev/null @@ -1,27 +0,0 @@ -* Freescale MXS MMC controller - -The Freescale MXS Synchronous Serial Ports (SSP) can act as a MMC controller -to support MMC, SD, and SDIO types of memory cards. - -This file documents differences between the core properties in mmc.txt -and the properties used by the mxsmmc driver. - -Required properties: -- compatible: Should be "fsl,<chip>-mmc". The supported chips include - imx23 and imx28. -- interrupts: Should contain ERROR interrupt number -- dmas: DMA specifier, consisting of a phandle to DMA controller node - and SSP DMA channel ID. - Refer to dma.txt and fsl-mxs-dma.txt for details. -- dma-names: Must be "rx-tx". - -Examples: - -ssp0: ssp@80010000 { - compatible = "fsl,imx28-mmc"; - reg = <0x80010000 2000>; - interrupts = <96>; - dmas = <&dma_apbh 0>; - dma-names = "rx-tx"; - bus-width = <8>; -}; diff --git a/dts/Bindings/mmc/mxs-mmc.yaml b/dts/Bindings/mmc/mxs-mmc.yaml new file mode 100644 index 0000000000..1cccc0478d --- /dev/null +++ b/dts/Bindings/mmc/mxs-mmc.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/mxs-mmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale MXS MMC controller + +maintainers: + - Shawn Guo <shawn.guo@linaro.org> + +description: | + The Freescale MXS Synchronous Serial Ports (SSP) can act as a MMC controller + to support MMC, SD, and SDIO types of memory cards. + + This file documents differences between the core properties in mmc.txt + and the properties used by the mxsmmc driver. + +allOf: + - $ref: "mmc-controller.yaml" + +properties: + compatible: + enum: + - fsl,imx23-mmc + - fsl,imx28-mmc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + dmas: + maxItems: 1 + + dma-names: + const: rx-tx + +required: + - compatible + - reg + - interrupts + - dmas + - dma-names + +unevaluatedProperties: false + +examples: + - | + mmc@80010000 { + compatible = "fsl,imx28-mmc"; + reg = <0x80010000 2000>; + interrupts = <96>; + dmas = <&dma_apbh 0>; + dma-names = "rx-tx"; + bus-width = <8>; + }; diff --git a/dts/Bindings/mmc/renesas,sdhi.txt b/dts/Bindings/mmc/renesas,sdhi.txt deleted file mode 100644 index 0ca9a622cc..0000000000 --- a/dts/Bindings/mmc/renesas,sdhi.txt +++ /dev/null @@ -1,114 +0,0 @@ -* Renesas SDHI SD/MMC controller - -Required properties: -- compatible: should contain one or more of the following: - "renesas,sdhi-sh73a0" - SDHI IP on SH73A0 SoC - "renesas,sdhi-r7s72100" - SDHI IP on R7S72100 SoC - "renesas,sdhi-r7s9210" - SDHI IP on R7S9210 SoC - "renesas,sdhi-r8a73a4" - SDHI IP on R8A73A4 SoC - "renesas,sdhi-r8a7740" - SDHI IP on R8A7740 SoC - "renesas,sdhi-r8a7742" - SDHI IP on R8A7742 SoC - "renesas,sdhi-r8a7743" - SDHI IP on R8A7743 SoC - "renesas,sdhi-r8a7744" - SDHI IP on R8A7744 SoC - "renesas,sdhi-r8a7745" - SDHI IP on R8A7745 SoC - "renesas,sdhi-r8a774a1" - SDHI IP on R8A774A1 SoC - "renesas,sdhi-r8a774b1" - SDHI IP on R8A774B1 SoC - "renesas,sdhi-r8a774c0" - SDHI IP on R8A774C0 SoC - "renesas,sdhi-r8a77470" - SDHI IP on R8A77470 SoC - "renesas,sdhi-mmc-r8a77470" - SDHI/MMC IP on R8A77470 SoC - "renesas,sdhi-r8a7778" - SDHI IP on R8A7778 SoC - "renesas,sdhi-r8a7779" - SDHI IP on R8A7779 SoC - "renesas,sdhi-r8a7790" - SDHI IP on R8A7790 SoC - "renesas,sdhi-r8a7791" - SDHI IP on R8A7791 SoC - "renesas,sdhi-r8a7792" - SDHI IP on R8A7792 SoC - "renesas,sdhi-r8a7793" - SDHI IP on R8A7793 SoC - "renesas,sdhi-r8a7794" - SDHI IP on R8A7794 SoC - "renesas,sdhi-r8a7795" - SDHI IP on R8A7795 SoC - "renesas,sdhi-r8a7796" - SDHI IP on R8A77960 SoC - "renesas,sdhi-r8a77961" - SDHI IP on R8A77961 SoC - "renesas,sdhi-r8a77965" - SDHI IP on R8A77965 SoC - "renesas,sdhi-r8a77970" - SDHI IP on R8A77970 SoC - "renesas,sdhi-r8a77980" - SDHI IP on R8A77980 SoC - "renesas,sdhi-r8a77990" - SDHI IP on R8A77990 SoC - "renesas,sdhi-r8a77995" - SDHI IP on R8A77995 SoC - "renesas,sdhi-shmobile" - a generic sh-mobile SDHI controller - "renesas,rcar-gen1-sdhi" - a generic R-Car Gen1 SDHI controller - "renesas,rcar-gen2-sdhi" - a generic R-Car Gen2 and RZ/G1 SDHI - (not SDHI/MMC) controller - "renesas,rcar-gen3-sdhi" - a generic R-Car Gen3 or RZ/G2 - SDHI controller - - - When compatible with the generic version, nodes must list - the SoC-specific version corresponding to the platform - first followed by the generic version. - -- clocks: Most controllers only have 1 clock source per channel. However, on - some variations of this controller, the internal card detection - logic that exists in this controller is sectioned off to be run by a - separate second clock source to allow the main core clock to be turned - off to save power. - If 2 clocks are specified by the hardware, you must name them as - "core" and "cd". If the controller only has 1 clock, naming is not - required. - Devices which have more than 1 clock are listed below: - 2: R7S72100, R7S9210 - -Optional properties: -- pinctrl-names: should be "default", "state_uhs" -- pinctrl-0: should contain default/high speed pin ctrl -- pinctrl-1: should contain uhs mode pin ctrl - -Example: R8A7790 (R-Car H2) SDHI controller nodes - - sdhi0: sd@ee100000 { - compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi"; - reg = <0 0xee100000 0 0x328>; - interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 314>; - dmas = <&dmac0 0xcd>, <&dmac0 0xce>, - <&dmac1 0xcd>, <&dmac1 0xce>; - dma-names = "tx", "rx", "tx", "rx"; - max-frequency = <195000000>; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 314>; - }; - - sdhi1: sd@ee120000 { - compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi"; - reg = <0 0xee120000 0 0x328>; - interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 313>; - dmas = <&dmac0 0xc9>, <&dmac0 0xca>, - <&dmac1 0xc9>, <&dmac1 0xca>; - dma-names = "tx", "rx", "tx", "rx"; - max-frequency = <195000000>; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 313>; - }; - - sdhi2: sd@ee140000 { - compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi"; - reg = <0 0xee140000 0 0x100>; - interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 312>; - dmas = <&dmac0 0xc1>, <&dmac0 0xc2>, - <&dmac1 0xc1>, <&dmac1 0xc2>; - dma-names = "tx", "rx", "tx", "rx"; - max-frequency = <97500000>; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 312>; - }; - - sdhi3: sd@ee160000 { - compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi"; - reg = <0 0xee160000 0 0x100>; - interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 311>; - dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, - <&dmac1 0xd3>, <&dmac1 0xd4>; - dma-names = "tx", "rx", "tx", "rx"; - max-frequency = <97500000>; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 311>; - }; diff --git a/dts/Bindings/mmc/renesas,sdhi.yaml b/dts/Bindings/mmc/renesas,sdhi.yaml new file mode 100644 index 0000000000..b4c3fd40ca --- /dev/null +++ b/dts/Bindings/mmc/renesas,sdhi.yaml @@ -0,0 +1,191 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/mmc/renesas,sdhi.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Renesas SDHI SD/MMC controller + +maintainers: + - Wolfram Sang <wsa+renesas@sang-engineering.com> + +allOf: + - $ref: "mmc-controller.yaml" + +properties: + compatible: + oneOf: + - items: + - const: renesas,sdhi-sh73a0 # R-Mobile APE6 + - items: + - const: renesas,sdhi-r7s72100 # RZ/A1H + - items: + - const: renesas,sdhi-r7s9210 # SH-Mobile AG5 + - items: + - const: renesas,sdhi-r8a73a4 # R-Mobile APE6 + - items: + - const: renesas,sdhi-r8a7740 # R-Mobile A1 + - items: + - enum: + - renesas,sdhi-r8a7778 # R-Car M1 + - renesas,sdhi-r8a7779 # R-Car H1 + - const: renesas,rcar-gen1-sdhi # R-Car Gen1 + - items: + - enum: + - renesas,sdhi-r8a7742 # RZ/G1H + - renesas,sdhi-r8a7743 # RZ/G1M + - renesas,sdhi-r8a7744 # RZ/G1N + - renesas,sdhi-r8a7745 # RZ/G1E + - renesas,sdhi-r8a77470 # RZ/G1C + - renesas,sdhi-r8a7790 # R-Car H2 + - renesas,sdhi-r8a7791 # R-Car M2-W + - renesas,sdhi-r8a7792 # R-Car V2H + - renesas,sdhi-r8a7793 # R-Car M2-N + - renesas,sdhi-r8a7794 # R-Car E2 + - const: renesas,rcar-gen2-sdhi # R-Car Gen2 and RZ/G1 + - items: + - const: renesas,sdhi-mmc-r8a77470 # RZ/G1C (SDHI/MMC IP) + - items: + - enum: + - renesas,sdhi-r8a774a1 # RZ/G2M + - renesas,sdhi-r8a774b1 # RZ/G2N + - renesas,sdhi-r8a774c0 # RZ/G2E + - renesas,sdhi-r8a7795 # R-Car H3 + - renesas,sdhi-r8a7796 # R-Car M3-W + - renesas,sdhi-r8a77961 # R-Car M3-W+ + - renesas,sdhi-r8a77965 # R-Car M3-N + - renesas,sdhi-r8a77970 # R-Car V3M + - renesas,sdhi-r8a77980 # R-Car V3H + - renesas,sdhi-r8a77990 # R-Car E3 + - renesas,sdhi-r8a77995 # R-Car D3 + - const: renesas,rcar-gen3-sdhi # R-Car Gen3 or RZ/G2 + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 3 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + maxItems: 2 + items: + - const: core + - const: cd + + dmas: + minItems: 4 + maxItems: 4 + + dma-names: + minItems: 4 + maxItems: 4 + items: + enum: + - tx + - rx + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + pinctrl-0: + minItems: 1 + maxItems: 2 + + pinctrl-1: + maxItems: 1 + + pinctrl-names: + minItems: 1 + maxItems: 2 + items: + - const: default + - const: state_uhs + + max-frequency: true + +required: + - compatible + - reg + - interrupts + - clocks + - power-domains + +if: + properties: + compatible: + items: + enum: + - renesas,sdhi-r7s72100 + - renesas,sdhi-r7s9210 +then: + required: + - clock-names + description: + The internal card detection logic that exists in these controllers is + sectioned off to be run by a separate second clock source to allow + the main core clock to be turned off to save power. + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a7790-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a7790-sysc.h> + + sdhi0: mmc@ee100000 { + compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi"; + reg = <0xee100000 0x328>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 314>; + dmas = <&dmac0 0xcd>, <&dmac0 0xce>, <&dmac1 0xcd>, <&dmac1 0xce>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <195000000>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 314>; + }; + + sdhi1: mmc@ee120000 { + compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi"; + reg = <0xee120000 0x328>; + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 313>; + dmas = <&dmac0 0xc9>, <&dmac0 0xca>, <&dmac1 0xc9>, <&dmac1 0xca>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <195000000>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 313>; + }; + + sdhi2: mmc@ee140000 { + compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi"; + reg = <0xee140000 0x100>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 312>; + dmas = <&dmac0 0xc1>, <&dmac0 0xc2>, <&dmac1 0xc1>, <&dmac1 0xc2>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 312>; + }; + + sdhi3: mmc@ee160000 { + compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi"; + reg = <0xee160000 0x100>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 311>; + dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, <&dmac1 0xd3>, <&dmac1 0xd4>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 311>; + }; diff --git a/dts/Bindings/mmc/sdhci-am654.txt b/dts/Bindings/mmc/sdhci-am654.txt index c6ccecb9ae..6d202f4d92 100644 --- a/dts/Bindings/mmc/sdhci-am654.txt +++ b/dts/Bindings/mmc/sdhci-am654.txt @@ -39,6 +39,7 @@ Optional Properties (Required for ti,am654-sdhci-5.1 and ti,j721e-sdhci-8bit): Valid values are 33, 40, 50, 66 and 100 ohms. Optional Properties: - ti,strobe-sel: strobe select delay for HS400 speed mode. Default value: 0x0. + - ti,clkbuf-sel: Clock Delay Buffer Select Example: diff --git a/dts/Bindings/mmc/sdhci-msm.txt b/dts/Bindings/mmc/sdhci-msm.txt index b8e1d2b7ae..3b602fd618 100644 --- a/dts/Bindings/mmc/sdhci-msm.txt +++ b/dts/Bindings/mmc/sdhci-msm.txt @@ -54,6 +54,21 @@ Required properties: - qcom,dll-config: Chipset and Platform specific value. Use this field to specify the DLL_CONFIG register value as per Hardware Programming Guide. +Optional Properties: +* Following bus parameters are required for interconnect bandwidth scaling: +- interconnects: Pairs of phandles and interconnect provider specifier + to denote the edge source and destination ports of + the interconnect path. + +- interconnect-names: For sdhc, we have two main paths. + 1. Data path : sdhc to ddr + 2. Config path : cpu to sdhc + For Data interconnect path the name supposed to be + is "sdhc-ddr" and for config interconnect path it is + "cpu-sdhc". + Please refer to Documentation/devicetree/bindings/ + interconnect/ for more details. + Example: sdhc_1: sdhci@f9824900 { @@ -71,6 +86,9 @@ Example: clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>; clock-names = "core", "iface"; + interconnects = <&qnoc MASTER_SDCC_ID &qnoc SLAVE_DDR_ID>, + <&qnoc MASTER_CPU_ID &qnoc SLAVE_SDCC_ID>; + interconnect-names = "sdhc-ddr","cpu-sdhc"; qcom,dll-config = <0x000f642c>; qcom,ddr-config = <0x80040868>; |