diff options
Diffstat (limited to 'dts/Bindings/remoteproc')
-rw-r--r-- | dts/Bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml | 87 | ||||
-rw-r--r-- | dts/Bindings/remoteproc/ingenic,vpu.yaml | 2 | ||||
-rw-r--r-- | dts/Bindings/remoteproc/mtk,scp.txt | 36 | ||||
-rw-r--r-- | dts/Bindings/remoteproc/mtk,scp.yaml | 92 | ||||
-rw-r--r-- | dts/Bindings/remoteproc/qcom,adsp.yaml | 59 | ||||
-rw-r--r-- | dts/Bindings/remoteproc/qcom,q6v5.txt | 39 | ||||
-rw-r--r-- | dts/Bindings/remoteproc/st,stm32-rproc.yaml | 4 | ||||
-rw-r--r-- | dts/Bindings/remoteproc/ti,k3-dsp-rproc.yaml | 4 | ||||
-rw-r--r-- | dts/Bindings/remoteproc/ti,k3-r5f-rproc.yaml | 4 |
9 files changed, 249 insertions, 78 deletions
diff --git a/dts/Bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml b/dts/Bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml new file mode 100644 index 0000000000..d892d29a65 --- /dev/null +++ b/dts/Bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/remoteproc/amlogic,meson-mx-ao-arc.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Amlogic Meson AO ARC Remote Processor bindings + +description: + Amlogic Meson6, Meson8, Meson8b and Meson8m2 SoCs embed an ARC core + controller for always-on operations, typically used for managing + system suspend. Meson6 and older use a ARC core based on the ARCv1 + ISA, while Meson8, Meson8b and Meson8m2 use an ARC EM4 (ARCv2 ISA) + core. + +maintainers: + - Martin Blumenstingl <martin.blumenstingl@googlemail.com> + +properties: + compatible: + items: + - enum: + - amlogic,meson8-ao-arc + - amlogic,meson8b-ao-arc + - const: amlogic,meson-mx-ao-arc + + firmware-name: + $ref: /schemas/types.yaml#/definitions/string + description: + The name of the firmware which should be loaded for this remote + processor. + + reg: + description: + Address ranges of the remap and CPU control addresses for the + remote processor. + minItems: 2 + + reg-names: + items: + - const: remap + - const: cpu + + resets: + minItems: 1 + + clocks: + minItems: 1 + + sram: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandles to a reserved SRAM region which is used as the memory of + the ARC core. The region should be defined as child nodes of the + AHB SRAM node as per the generic bindings in + Documentation/devicetree/bindings/sram/sram.yaml + + amlogic,secbus2: + $ref: /schemas/types.yaml#/definitions/phandle + description: + A phandle to the SECBUS2 region which contains some configuration + bits of this remote processor + +required: + - compatible + - reg + - reg-names + - resets + - clocks + - sram + - amlogic,secbus2 + +additionalProperties: false + +examples: + - | + remoteproc@1c { + compatible= "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc"; + reg = <0x1c 0x8>, <0x38 0x8>; + reg-names = "remap", "cpu"; + resets = <&media_cpu_reset>; + clocks = <&media_cpu_clock>; + sram = <&ahb_sram_ao_arc>; + amlogic,secbus2 = <&secbus2>; + }; + +... diff --git a/dts/Bindings/remoteproc/ingenic,vpu.yaml b/dts/Bindings/remoteproc/ingenic,vpu.yaml index d0aa91bbf5..aaaaabad46 100644 --- a/dts/Bindings/remoteproc/ingenic,vpu.yaml +++ b/dts/Bindings/remoteproc/ingenic,vpu.yaml @@ -58,7 +58,7 @@ additionalProperties: false examples: - | - #include <dt-bindings/clock/jz4770-cgu.h> + #include <dt-bindings/clock/ingenic,jz4770-cgu.h> vpu: video-decoder@132a0000 { compatible = "ingenic,jz4770-vpu-rproc"; diff --git a/dts/Bindings/remoteproc/mtk,scp.txt b/dts/Bindings/remoteproc/mtk,scp.txt deleted file mode 100644 index 3f5f78764b..0000000000 --- a/dts/Bindings/remoteproc/mtk,scp.txt +++ /dev/null @@ -1,36 +0,0 @@ -Mediatek SCP Bindings ----------------------------------------- - -This binding provides support for ARM Cortex M4 Co-processor found on some -Mediatek SoCs. - -Required properties: -- compatible Should be "mediatek,mt8183-scp" -- reg Should contain the address ranges for memory regions: - SRAM, CFG, and L1TCM. -- reg-names Contains the corresponding names for the memory regions: - "sram", "cfg", and "l1tcm". -- clocks Clock for co-processor (See: ../clock/clock-bindings.txt) -- clock-names Contains the corresponding name for the clock. This - should be named "main". - -Subnodes --------- - -Subnodes of the SCP represent rpmsg devices. The names of the devices are not -important. The properties of these nodes are defined by the individual bindings -for the rpmsg devices - but must contain the following property: - -- mtk,rpmsg-name Contains the name for the rpmsg device. Used to match - the subnode to rpmsg device announced by SCP. - -Example: - - scp: scp@10500000 { - compatible = "mediatek,mt8183-scp"; - reg = <0 0x10500000 0 0x80000>, - <0 0x105c0000 0 0x5000>; - reg-names = "sram", "cfg"; - clocks = <&infracfg CLK_INFRA_SCPSYS>; - clock-names = "main"; - }; diff --git a/dts/Bindings/remoteproc/mtk,scp.yaml b/dts/Bindings/remoteproc/mtk,scp.yaml new file mode 100644 index 0000000000..d21a25ee96 --- /dev/null +++ b/dts/Bindings/remoteproc/mtk,scp.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/remoteproc/mtk,scp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek SCP Bindings + +maintainers: + - Tinghan Shen <tinghan.shen@mediatek.com> + +description: + This binding provides support for ARM Cortex M4 Co-processor found on some + Mediatek SoCs. + +properties: + compatible: + enum: + - mediatek,mt8183-scp + - mediatek,mt8192-scp + - mediatek,mt8195-scp + + reg: + description: + Should contain the address ranges for memory regions SRAM, CFG, and + L1TCM. + maxItems: 3 + + reg-names: + items: + - const: sram + - const: cfg + - const: l1tcm + + clocks: + description: + Clock for co-processor (see ../clock/clock-bindings.txt). + Required by mt8183 and mt8192. + maxItems: 1 + + clock-names: + const: main + +required: + - compatible + - reg + - reg-names + +if: + properties: + compatible: + enum: + - mediatek,mt8183-scp + - mediatek,mt8192-scp +then: + required: + - clocks + - clock-names + +additionalProperties: + type: object + description: + Subnodes of the SCP represent rpmsg devices. The names of the devices + are not important. The properties of these nodes are defined by the + individual bindings for the rpmsg devices. + properties: + mediatek,rpmsg-name: + $ref: /schemas/types.yaml#/definitions/string-array + description: + Contains the name for the rpmsg device. Used to match + the subnode to rpmsg device announced by SCP. + + required: + - mediatek,rpmsg-name + +examples: + - | + #include <dt-bindings/clock/mt8183-clk.h> + + scp@10500000 { + compatible = "mediatek,mt8183-scp"; + reg = <0x10500000 0x80000>, + <0x10700000 0x8000>, + <0x10720000 0xe0000>; + reg-names = "sram", "cfg", "l1tcm"; + clocks = <&infracfg CLK_INFRA_SCPSYS>; + clock-names = "main"; + + cros_ec { + mediatek,rpmsg-name = "cros-ec-rpmsg"; + }; + }; diff --git a/dts/Bindings/remoteproc/qcom,adsp.yaml b/dts/Bindings/remoteproc/qcom,adsp.yaml index 0c112f3264..63e06d93bc 100644 --- a/dts/Bindings/remoteproc/qcom,adsp.yaml +++ b/dts/Bindings/remoteproc/qcom,adsp.yaml @@ -25,6 +25,7 @@ properties: - qcom,qcs404-cdsp-pas - qcom,qcs404-wcss-pas - qcom,sc7180-mpss-pas + - qcom,sc7280-mpss-pas - qcom,sc8180x-adsp-pas - qcom,sc8180x-cdsp-pas - qcom,sc8180x-mpss-pas @@ -93,6 +94,10 @@ properties: maxItems: 1 description: Reference to the reserved-memory for the Hexagon core + qcom,qmp: + $ref: /schemas/types.yaml#/definitions/phandle + description: Reference to the AOSS side-channel message RAM. + qcom,smem-states: $ref: /schemas/types.yaml#/definitions/phandle-array description: States used by the AP to signal the Hexagon core @@ -147,6 +152,7 @@ allOf: - qcom,msm8998-adsp-pas - qcom,qcs404-adsp-pas - qcom,qcs404-wcss-pas + - qcom,sc7280-mpss-pas - qcom,sc8180x-adsp-pas - qcom,sc8180x-cdsp-pas - qcom,sc8180x-mpss-pas @@ -292,6 +298,7 @@ allOf: contains: enum: - qcom,sc7180-mpss-pas + - qcom,sc7280-mpss-pas - qcom,sc8180x-mpss-pas - qcom,sdx55-mpss-pas - qcom,sm8150-mpss-pas @@ -369,13 +376,11 @@ allOf: properties: power-domains: items: - - description: Load State power domain - description: CX power domain - description: MX power domain - description: MSS power domain power-domain-names: items: - - const: load_state - const: cx - const: mx - const: mss @@ -391,43 +396,21 @@ allOf: properties: power-domains: items: - - description: Load State power domain - description: CX power domain - power-domain-names: - items: - - const: load_state - - const: cx - if: properties: compatible: contains: enum: + - qcom,sc7280-mpss-pas + - qcom,sdx55-mpss-pas - qcom,sm8150-mpss-pas - qcom,sm8350-mpss-pas then: properties: power-domains: items: - - description: Load State power domain - - description: CX power domain - - description: MSS power domain - power-domain-names: - items: - - const: load_state - - const: cx - - const: mss - - - if: - properties: - compatible: - contains: - enum: - - qcom,sdx55-mpss-pas - then: - properties: - power-domains: - items: - description: CX power domain - description: MSS power domain power-domain-names: @@ -451,12 +434,10 @@ allOf: properties: power-domains: items: - - description: Load State power domain - description: LCX power domain - description: LMX power domain power-domain-names: items: - - const: load_state - const: lcx - const: lmx @@ -470,12 +451,10 @@ allOf: properties: power-domains: items: - - description: Load State power domain - description: CX power domain - description: MXC power domain power-domain-names: items: - - const: load_state - const: cx - const: mxc @@ -500,6 +479,7 @@ allOf: contains: enum: - qcom,sc7180-mpss-pas + - qcom,sc7280-mpss-pas then: properties: resets: @@ -511,6 +491,25 @@ allOf: - const: mss_restart - const: pdc_reset + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8974-adsp-pil + - qcom,msm8996-adsp-pil + - qcom,msm8996-slpi-pil + - qcom,msm8998-adsp-pas + - qcom,msm8998-slpi-pas + - qcom,qcs404-adsp-pas + - qcom,qcs404-cdsp-pas + - qcom,qcs404-wcss-pas + - qcom,sdm660-adsp-pas + - qcom,sdx55-mpss-pas + then: + properties: + qcom,qmp: false + examples: - | #include <dt-bindings/clock/qcom,rpmcc.h> diff --git a/dts/Bindings/remoteproc/qcom,q6v5.txt b/dts/Bindings/remoteproc/qcom,q6v5.txt index 69c49c7b2c..8f1507052a 100644 --- a/dts/Bindings/remoteproc/qcom,q6v5.txt +++ b/dts/Bindings/remoteproc/qcom,q6v5.txt @@ -15,6 +15,7 @@ on the Qualcomm Hexagon core. "qcom,msm8996-mss-pil" "qcom,msm8998-mss-pil" "qcom,sc7180-mss-pil" + "qcom,sc7280-mss-pil" "qcom,sdm845-mss-pil" - reg: @@ -47,6 +48,7 @@ on the Qualcomm Hexagon core. qcom,msm8996-mss-pil: qcom,msm8998-mss-pil: qcom,sc7180-mss-pil: + qcom,sc7280-mss-pil: qcom,sdm845-mss-pil: must be "wdog", "fatal", "ready", "handover", "stop-ack", "shutdown-ack" @@ -87,6 +89,8 @@ on the Qualcomm Hexagon core. qcom,sc7180-mss-pil: must be "iface", "bus", "xo", "snoc_axi", "mnoc_axi", "nav" + qcom,sc7280-mss-pil: + must be "iface", "xo", "snoc_axi", "offline", "pka" qcom,sdm845-mss-pil: must be "iface", "bus", "mem", "xo", "gpll0_mss", "snoc_axi", "mnoc_axi", "prng" @@ -98,7 +102,7 @@ on the Qualcomm Hexagon core. reference to the list of 3 reset-controllers for the wcss sub-system reference to the list of 2 reset-controllers for the modem - sub-system on SC7180, SDM845 SoCs + sub-system on SC7180, SC7280, SDM845 SoCs - reset-names: Usage: required @@ -107,7 +111,7 @@ on the Qualcomm Hexagon core. must be "wcss_aon_reset", "wcss_reset", "wcss_q6_reset" for the wcss sub-system must be "mss_restart", "pdc_reset" for the modem - sub-system on SC7180, SDM845 SoCs + sub-system on SC7180, SC7280, SDM845 SoCs For devices where the mba and mpss sub-nodes are not specified, mba/mpss region should be referenced as follows: @@ -173,8 +177,16 @@ For the compatible string below the following supplies are required: qcom,msm8998-mss-pil: must be "cx", "mx" qcom,sc7180-mss-pil: + must be "cx", "mx", "mss" + qcom,sc7280-mss-pil: + must be "cx", "mss" qcom,sdm845-mss-pil: - must be "cx", "mx", "mss", "load_state" + must be "cx", "mx", "mss" + +- qcom,qmp: + Usage: optional + Value type: <phandle> + Definition: reference to the AOSS side-channel message RAM. - qcom,smem-states: Usage: required @@ -193,6 +205,9 @@ For the compatible string below the following supplies are required: Definition: a phandle reference to a syscon representing TCSR followed by the three offsets within syscon for q6, modem and nc halt registers. + a phandle reference to a syscon representing TCSR followed + by the four offsets within syscon for q6, modem, nc and vq6 + halt registers on SC7280 SoCs. For the compatible strings below the following phandle references are required: "qcom,sc7180-mss-pil" @@ -203,6 +218,24 @@ For the compatible strings below the following phandle references are required: by the offset within syscon for conn_box_spare0 register used by the modem sub-system running on SC7180 SoC. +For the compatible strings below the following phandle references are required: + "qcom,sc7280-mss-pil" +- qcom,ext-regs: + Usage: required + Value type: <prop-encoded-array> + Definition: two phandle references to syscons representing TCSR_REG and + TCSR register space followed by the two offsets within the syscon + to force_clk_en/rscc_disable and axim1_clk_off/crypto_clk_off + registers respectively. + +- qcom,qaccept-regs: + Usage: required + Value type: <prop-encoded-array> + Definition: a phandle reference to a syscon representing TCSR followed + by the three offsets within syscon for mdm, cx and axi + qaccept registers used by the modem sub-system running on + SC7280 SoC. + The Hexagon node must contain iommus property as described in ../iommu/iommu.txt on platforms which do not have TrustZone. diff --git a/dts/Bindings/remoteproc/st,stm32-rproc.yaml b/dts/Bindings/remoteproc/st,stm32-rproc.yaml index 1e6225677e..b587c97c28 100644 --- a/dts/Bindings/remoteproc/st,stm32-rproc.yaml +++ b/dts/Bindings/remoteproc/st,stm32-rproc.yaml @@ -11,8 +11,8 @@ description: boots firmwares on the ST32MP family chipset. maintainers: - - Fabien Dessenne <fabien.dessenne@st.com> - - Arnaud Pouliquen <arnaud.pouliquen@st.com> + - Fabien Dessenne <fabien.dessenne@foss.st.com> + - Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> properties: compatible: diff --git a/dts/Bindings/remoteproc/ti,k3-dsp-rproc.yaml b/dts/Bindings/remoteproc/ti,k3-dsp-rproc.yaml index 6070456a7b..5ec6505ac4 100644 --- a/dts/Bindings/remoteproc/ti,k3-dsp-rproc.yaml +++ b/dts/Bindings/remoteproc/ti,k3-dsp-rproc.yaml @@ -133,9 +133,7 @@ unevaluatedProperties: false examples: - | - / { - model = "Texas Instruments K3 J721E SoC"; - compatible = "ti,j721e"; + soc { #address-cells = <2>; #size-cells = <2>; diff --git a/dts/Bindings/remoteproc/ti,k3-r5f-rproc.yaml b/dts/Bindings/remoteproc/ti,k3-r5f-rproc.yaml index 130fbaacc4..eeef255c40 100644 --- a/dts/Bindings/remoteproc/ti,k3-r5f-rproc.yaml +++ b/dts/Bindings/remoteproc/ti,k3-r5f-rproc.yaml @@ -230,9 +230,7 @@ additionalProperties: false examples: - | - / { - model = "Texas Instruments K3 AM654 SoC"; - compatible = "ti,am654-evm", "ti,am654"; + soc { #address-cells = <2>; #size-cells = <2>; |