diff options
Diffstat (limited to 'dts/Bindings/usb')
113 files changed, 6224 insertions, 1155 deletions
diff --git a/dts/Bindings/usb/allwinner,sun4i-a10-musb.yaml b/dts/Bindings/usb/allwinner,sun4i-a10-musb.yaml index 933fa356d2..f972ce976e 100644 --- a/dts/Bindings/usb/allwinner,sun4i-a10-musb.yaml +++ b/dts/Bindings/usb/allwinner,sun4i-a10-musb.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/usb/allwinner,sun4i-a10-musb.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Allwinner A10 mUSB OTG Controller Device Tree Bindings +title: Allwinner A10 mUSB OTG Controller maintainers: - Chen-Yu Tsai <wens@csie.org> @@ -13,13 +13,16 @@ maintainers: properties: compatible: oneOf: - - const: allwinner,sun4i-a10-musb - - const: allwinner,sun6i-a31-musb - - const: allwinner,sun8i-a33-musb - - const: allwinner,sun8i-h3-musb + - enum: + - allwinner,sun4i-a10-musb + - allwinner,sun6i-a31-musb + - allwinner,sun8i-a33-musb + - allwinner,sun8i-h3-musb + - allwinner,suniv-f1c100s-musb - items: - enum: - allwinner,sun8i-a83t-musb + - allwinner,sun20i-d1-musb - allwinner,sun50i-h6-musb - const: allwinner,sun8i-a33-musb - items: diff --git a/dts/Bindings/usb/am33xx-usb.txt b/dts/Bindings/usb/am33xx-usb.txt index 7a198a3040..654ffc62d0 100644 --- a/dts/Bindings/usb/am33xx-usb.txt +++ b/dts/Bindings/usb/am33xx-usb.txt @@ -61,8 +61,9 @@ DMA endpoint number (0 … 14 for endpoints 1 … 15 on instance 0 and 15 … 29 for endpoints 1 … 15 on instance 1). The second number is 0 for RX and 1 for TX transfers. -- #dma-channels: should be set to 30 representing the 15 endpoints for +- dma-channels: should be set to 30 representing the 15 endpoints for each USB instance. +- #dma-channels: deprecated Example: ~~~~~~~~ @@ -193,7 +194,7 @@ usb: usb@47400000 { interrupts = <17>; interrupt-names = "glue"; #dma-cells = <2>; - #dma-channels = <30>; - #dma-requests = <256>; + dma-channels = <30>; + dma-requests = <256>; }; }; diff --git a/dts/Bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml b/dts/Bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml index e349fa5de6..da757c1155 100644 --- a/dts/Bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml +++ b/dts/Bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml @@ -2,13 +2,13 @@ # Copyright 2019 BayLibre, SAS %YAML 1.2 --- -$id: "http://devicetree.org/schemas/usb/amlogic,meson-g12a-usb-ctrl.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/usb/amlogic,meson-g12a-usb-ctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Amlogic Meson G12A DWC3 USB SoC Controller Glue maintainers: - - Neil Armstrong <narmstrong@baylibre.com> + - Neil Armstrong <neil.armstrong@linaro.org> description: | The Amlogic G12A embeds a DWC3 USB IP Core configured for USB2 and USB3 @@ -108,6 +108,7 @@ allOf: then: properties: phy-names: + minItems: 2 items: - const: usb2-phy0 # USB2 PHY0 if USBHOST_A port is used - const: usb2-phy1 # USB2 PHY1 if USBOTG_B port is used diff --git a/dts/Bindings/usb/analogix,anx7411.yaml b/dts/Bindings/usb/analogix,anx7411.yaml new file mode 100644 index 0000000000..e4d893369d --- /dev/null +++ b/dts/Bindings/usb/analogix,anx7411.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/analogix,anx7411.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analogix ANX7411 Type-C controller + +maintainers: + - Xin Ji <xji@analogixsemi.com> + +properties: + compatible: + enum: + - analogix,anx7411 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + connector: + type: object + $ref: ../connector/usb-connector.yaml + unevaluatedProperties: false + + description: + Properties for usb c connector. + + properties: + compatible: + const: usb-c-connector + + power-role: true + + data-role: true + + try-power-role: true + + required: + - compatible + +required: + - compatible + - reg + - connector + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + typec@2c { + compatible = "analogix,anx7411"; + reg = <0x2c>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpio0>; + + typec_con: connector { + compatible = "usb-c-connector"; + power-role = "dual"; + data-role = "dual"; + try-power-role = "source"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + typec_con_ep: endpoint { + remote-endpoint = <&usbotg_hs_ep>; + }; + }; + }; + }; + }; + }; +... diff --git a/dts/Bindings/usb/aspeed,ast2600-udc.yaml b/dts/Bindings/usb/aspeed,ast2600-udc.yaml new file mode 100644 index 0000000000..c3b6be3d80 --- /dev/null +++ b/dts/Bindings/usb/aspeed,ast2600-udc.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2020 Facebook Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/aspeed,ast2600-udc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ASPEED USB 2.0 Device Controller + +maintainers: + - Neal Liu <neal_liu@aspeedtech.com> + +description: |+ + The ASPEED USB 2.0 Device Controller implements 1 control endpoint and + 4 generic endpoints for AST260x. + + Supports independent DMA channel for each generic endpoint. + Supports 32/256 stages descriptor mode for all generic endpoints. + +properties: + compatible: + enum: + - aspeed,ast2600-udc + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/aspeed-clock.h> + udc: usb@1e6a2000 { + compatible = "aspeed,ast2600-udc"; + reg = <0x1e6a2000 0x300>; + interrupts = <9>; + clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2bd_default>; + }; diff --git a/dts/Bindings/usb/aspeed,usb-vhub.yaml b/dts/Bindings/usb/aspeed,usb-vhub.yaml index 8b019ac05b..a86bcd9510 100644 --- a/dts/Bindings/usb/aspeed,usb-vhub.yaml +++ b/dts/Bindings/usb/aspeed,usb-vhub.yaml @@ -67,6 +67,7 @@ properties: vhub-strings: type: object + additionalProperties: false properties: '#address-cells': @@ -78,6 +79,7 @@ properties: patternProperties: '^string@[0-9a-f]+$': type: object + additionalProperties: false description: string descriptors of the specific language properties: diff --git a/dts/Bindings/usb/atmel-usb.txt b/dts/Bindings/usb/atmel-usb.txt index f512f02907..12183ef47e 100644 --- a/dts/Bindings/usb/atmel-usb.txt +++ b/dts/Bindings/usb/atmel-usb.txt @@ -87,6 +87,9 @@ Required properties: "atmel,at91sam9g45-udc" "atmel,sama5d3-udc" "microchip,sam9x60-udc" + "microchip,lan9662-udc" + For "microchip,lan9662-udc" the fallback "atmel,sama5d3-udc" + is required. - reg: Address and length of the register set for the device - interrupts: Should contain usba interrupt - clocks: Should reference the peripheral and host clocks diff --git a/dts/Bindings/usb/brcm,bcm3384-usb.txt b/dts/Bindings/usb/brcm,bcm3384-usb.txt deleted file mode 100644 index 452c45c7bf..0000000000 --- a/dts/Bindings/usb/brcm,bcm3384-usb.txt +++ /dev/null @@ -1,11 +0,0 @@ -* Broadcom USB controllers - -Required properties: -- compatible: "brcm,bcm3384-ohci", "brcm,bcm3384-ehci" - - These currently use the generic-ohci and generic-ehci drivers. On some - systems, special handling may be needed in the following cases: - - - Restoring state after systemwide power save modes - - Sharing PHYs with the USBD (UDC) hardware - - Figuring out which controllers are disabled on ASIC bondout variants diff --git a/dts/Bindings/usb/brcm,bcm7445-ehci.yaml b/dts/Bindings/usb/brcm,bcm7445-ehci.yaml index 2a9acf2b5a..1536cbec63 100644 --- a/dts/Bindings/usb/brcm,bcm7445-ehci.yaml +++ b/dts/Bindings/usb/brcm,bcm7445-ehci.yaml @@ -4,10 +4,10 @@ $id: http://devicetree.org/schemas/usb/brcm,bcm7445-ehci.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Broadcom STB USB EHCI Controller Device Tree Bindings +title: Broadcom STB USB EHCI Controller allOf: - - $ref: "usb-hcd.yaml" + - $ref: usb-hcd.yaml maintainers: - Al Cooper <alcooperx@gmail.com> diff --git a/dts/Bindings/usb/brcm,bdc.txt b/dts/Bindings/usb/brcm,bdc.txt deleted file mode 100644 index c9f52b97ce..0000000000 --- a/dts/Bindings/usb/brcm,bdc.txt +++ /dev/null @@ -1,29 +0,0 @@ -Broadcom USB Device Controller (BDC) -==================================== - -Required properties: - -- compatible: must be one of: - "brcm,bdc-udc-v2" - "brcm,bdc" -- reg: the base register address and length -- interrupts: the interrupt line for this controller - -Optional properties: - -On Broadcom STB platforms, these properties are required: - -- phys: phandle to one or two USB PHY blocks - NOTE: Some SoC's have a single phy and some have - USB 2.0 and USB 3.0 phys -- clocks: phandle to the functional clock of this block - -Example: - - bdc@f0b02000 { - compatible = "brcm,bdc-udc-v2"; - reg = <0xf0b02000 0xfc4>; - interrupts = <0x0 0x60 0x0>; - phys = <&usbphy_0 0x0>; - clocks = <&sw_usbd>; - }; diff --git a/dts/Bindings/usb/brcm,bdc.yaml b/dts/Bindings/usb/brcm,bdc.yaml new file mode 100644 index 0000000000..9e561fee98 --- /dev/null +++ b/dts/Bindings/usb/brcm,bdc.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/brcm,bdc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom USB Device Controller (BDC) + +maintainers: + - Al Cooper <alcooperx@gmail.com> + - Florian Fainelli <f.fainelli@gmail.com> + +properties: + compatible: + items: + - enum: + - brcm,bdc-udc-v2 + - brcm,bdc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + phys: + minItems: 1 + items: + - description: USB 2.0 or 3.0 PHY + - description: USB 3.0 PHY if there is a dedicated 2.0 PHY + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + usb@f0b02000 { + compatible = "brcm,bdc-udc-v2"; + reg = <0xf0b02000 0xfc4>; + interrupts = <0x0 0x60 0x0>; + phys = <&usbphy_0 0x0>; + clocks = <&sw_usbd>; + }; diff --git a/dts/Bindings/usb/brcm,usb-pinmap.yaml b/dts/Bindings/usb/brcm,usb-pinmap.yaml index d4618d15ec..5cc81ced58 100644 --- a/dts/Bindings/usb/brcm,usb-pinmap.yaml +++ b/dts/Bindings/usb/brcm,usb-pinmap.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/usb/brcm,usb-pinmap.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Broadcom USB pin map Controller Device Tree Bindings +title: Broadcom USB pin map Controller maintainers: - Al Cooper <alcooperx@gmail.com> diff --git a/dts/Bindings/usb/cdns,usb3.yaml b/dts/Bindings/usb/cdns,usb3.yaml index dc9d6ed078..69a93a0722 100644 --- a/dts/Bindings/usb/cdns,usb3.yaml +++ b/dts/Bindings/usb/cdns,usb3.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/usb/cdns,usb3.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Cadence USBSS-DRD controller bindings +title: Cadence USBSS-DRD controller maintainers: - Pawel Laszczak <pawell@cadence.com> @@ -64,7 +64,7 @@ properties: description: size of memory intended as internal memory for endpoints buffers expressed in KB - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint16 cdns,phyrst-a-enable: description: Enable resetting of PHY if Rx fail is detected diff --git a/dts/Bindings/usb/ci-hdrc-usb2.txt b/dts/Bindings/usb/ci-hdrc-usb2.txt deleted file mode 100644 index a5c5db6a0b..0000000000 --- a/dts/Bindings/usb/ci-hdrc-usb2.txt +++ /dev/null @@ -1,158 +0,0 @@ -* USB2 ChipIdea USB controller for ci13xxx - -Required properties: -- compatible: should be one of: - "fsl,imx23-usb" - "fsl,imx27-usb" - "fsl,imx28-usb" - "fsl,imx6q-usb" - "fsl,imx6sl-usb" - "fsl,imx6sx-usb" - "fsl,imx6ul-usb" - "fsl,imx7d-usb" - "fsl,imx7ulp-usb" - "lsi,zevio-usb" - "qcom,ci-hdrc" - "chipidea,usb2" - "xlnx,zynq-usb-2.20a" - "nvidia,tegra20-udc" - "nvidia,tegra30-udc" - "nvidia,tegra114-udc" - "nvidia,tegra124-udc" -- reg: base address and length of the registers -- interrupts: interrupt for the USB controller - -Recommended properies: -- phy_type: the type of the phy connected to the core. Should be one - of "utmi", "utmi_wide", "ulpi", "serial" or "hsic". Without this - property the PORTSC register won't be touched. -- dr_mode: One of "host", "peripheral" or "otg". Defaults to "otg" - -Deprecated properties: -- usb-phy: phandle for the PHY device. Use "phys" instead. -- fsl,usbphy: phandle of usb phy that connects to the port. Use "phys" instead. - -Optional properties: -- clocks: reference to the USB clock -- phys: reference to the USB PHY -- phy-names: should be "usb-phy" -- vbus-supply: reference to the VBUS regulator -- maximum-speed: limit the maximum connection speed to "full-speed". -- tpl-support: TPL (Targeted Peripheral List) feature for targeted hosts -- itc-setting: interrupt threshold control register control, the setting - should be aligned with ITC bits at register USBCMD. -- ahb-burst-config: it is vendor dependent, the required value should be - aligned with AHBBRST at SBUSCFG, the range is from 0x0 to 0x7. This - property is used to change AHB burst configuration, check the chipidea - spec for meaning of each value. If this property is not existed, it - will use the reset value. -- tx-burst-size-dword: it is vendor dependent, the tx burst size in dword - (4 bytes), This register represents the maximum length of a the burst - in 32-bit words while moving data from system memory to the USB - bus, the value of this property will only take effect if property - "ahb-burst-config" is set to 0, if this property is missing the reset - default of the hardware implementation will be used. -- rx-burst-size-dword: it is vendor dependent, the rx burst size in dword - (4 bytes), This register represents the maximum length of a the burst - in 32-bit words while moving data from the USB bus to system memory, - the value of this property will only take effect if property - "ahb-burst-config" is set to 0, if this property is missing the reset - default of the hardware implementation will be used. -- extcon: phandles to external connector devices. First phandle should point to - external connector, which provide "USB" cable events, the second should point - to external connector device, which provide "USB-HOST" cable events. If one - of the external connector devices is not required, empty <0> phandle should - be specified. -- phy-clkgate-delay-us: the delay time (us) between putting the PHY into - low power mode and gating the PHY clock. -- non-zero-ttctrl-ttha: after setting this property, the value of register - ttctrl.ttha will be 0x7f; if not, the value will be 0x0, this is the default - value. It needs to be very carefully for setting this property, it is - recommended that consult with your IC engineer before setting this value. - On the most of chipidea platforms, the "usage_tt" flag at RTL is 0, so this - property only affects siTD. - If this property is not set, the max packet size is 1023 bytes, and if - the total of packet size for pervious transactions are more than 256 bytes, - it can't accept any transactions within this frame. The use case is single - transaction, but higher frame rate. - If this property is set, the max packet size is 188 bytes, it can handle - more transactions than above case, it can accept transactions until it - considers the left room size within frame is less than 188 bytes, software - needs to make sure it does not send more than 90% - maximum_periodic_data_per_frame. The use case is multiple transactions, but - less frame rate. -- mux-controls: The mux control for toggling host/device output of this - controller. It's expected that a mux state of 0 indicates device mode and a - mux state of 1 indicates host mode. -- mux-control-names: Shall be "usb_switch" if mux-controls is specified. -- pinctrl-names: Names for optional pin modes in "default", "host", "device". - In case of HSIC-mode, "idle" and "active" pin modes are mandatory. In this - case, the "idle" state needs to pull down the data and strobe pin - and the "active" state needs to pull up the strobe pin. -- pinctrl-n: alternate pin modes - -i.mx specific properties -- fsl,usbmisc: phandler of non-core register device, with one - argument that indicate usb controller index -- disable-over-current: disable over current detect -- over-current-active-low: over current signal polarity is active low. -- over-current-active-high: over current signal polarity is active high. - It's recommended to specify the over current polarity. -- power-active-high: power signal polarity is active high -- external-vbus-divider: enables off-chip resistor divider for Vbus -- samsung,picophy-pre-emp-curr-control: HS Transmitter Pre-Emphasis Current - Control. This signal controls the amount of current sourced to the - USB_OTG*_DP and USB_OTG*_DN pins after a J-to-K or K-to-J transition. - The range is from 0x0 to 0x3, the default value is 0x1. - Details can refer to TXPREEMPAMPTUNE0 bits of USBNC_n_PHY_CFG1. -- samsung,picophy-dc-vol-level-adjust: HS DC Voltage Level Adjustment. - Adjust the high-speed transmitter DC level voltage. - The range is from 0x0 to 0xf, the default value is 0x3. - Details can refer to TXVREFTUNE0 bits of USBNC_n_PHY_CFG1. - -Example: - - usb@f7ed0000 { - compatible = "chipidea,usb2"; - reg = <0xf7ed0000 0x10000>; - interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&chip CLKID_USB0>; - phys = <&usb_phy0>; - phy-names = "usb-phy"; - vbus-supply = <®_usb0_vbus>; - itc-setting = <0x4>; /* 4 micro-frames */ - /* Incremental burst of unspecified length */ - ahb-burst-config = <0x0>; - tx-burst-size-dword = <0x10>; /* 64 bytes */ - rx-burst-size-dword = <0x10>; - extcon = <0>, <&usb_id>; - phy-clkgate-delay-us = <400>; - mux-controls = <&usb_switch>; - mux-control-names = "usb_switch"; - }; - -Example for HSIC: - - usb@2184400 { - compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; - reg = <0x02184400 0x200>; - interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6QDL_CLK_USBOH3>; - fsl,usbphy = <&usbphynop1>; - fsl,usbmisc = <&usbmisc 2>; - phy_type = "hsic"; - dr_mode = "host"; - ahb-burst-config = <0x0>; - tx-burst-size-dword = <0x10>; - rx-burst-size-dword = <0x10>; - pinctrl-names = "idle", "active"; - pinctrl-0 = <&pinctrl_usbh2_idle>; - pinctrl-1 = <&pinctrl_usbh2_active>; - #address-cells = <1>; - #size-cells = <0>; - - usbnet: smsc@1 { - compatible = "usb424,9730"; - reg = <1>; - }; - }; diff --git a/dts/Bindings/usb/ci-hdrc-usb2.yaml b/dts/Bindings/usb/ci-hdrc-usb2.yaml new file mode 100644 index 0000000000..b7e664f739 --- /dev/null +++ b/dts/Bindings/usb/ci-hdrc-usb2.yaml @@ -0,0 +1,470 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/ci-hdrc-usb2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: USB2 ChipIdea USB controller + +maintainers: + - Xu Yang <xu.yang_2@nxp.com> + - Peng Fan <peng.fan@nxp.com> + +properties: + compatible: + oneOf: + - enum: + - chipidea,usb2 + - fsl,imx27-usb + - lsi,zevio-usb + - nuvoton,npcm750-udc + - nvidia,tegra20-ehci + - nvidia,tegra20-udc + - nvidia,tegra30-ehci + - nvidia,tegra30-udc + - nvidia,tegra114-udc + - nvidia,tegra124-udc + - qcom,ci-hdrc + - items: + - enum: + - nvidia,tegra114-ehci + - nvidia,tegra124-ehci + - nvidia,tegra210-ehci + - const: nvidia,tegra30-ehci + - items: + - enum: + - fsl,imx23-usb + - fsl,imx25-usb + - fsl,imx28-usb + - fsl,imx35-usb + - fsl,imx50-usb + - fsl,imx51-usb + - fsl,imx53-usb + - fsl,imx6q-usb + - fsl,imx6sl-usb + - fsl,imx6sx-usb + - fsl,imx6ul-usb + - fsl,imx7d-usb + - fsl,vf610-usb + - const: fsl,imx27-usb + - items: + - enum: + - fsl,imx8dxl-usb + - fsl,imx8ulp-usb + - const: fsl,imx7ulp-usb + - const: fsl,imx6ul-usb + - items: + - enum: + - fsl,imx8mm-usb + - fsl,imx8mn-usb + - const: fsl,imx7d-usb + - const: fsl,imx27-usb + - items: + - enum: + - fsl,imx6sll-usb + - fsl,imx7ulp-usb + - const: fsl,imx6ul-usb + - const: fsl,imx27-usb + - items: + - const: xlnx,zynq-usb-2.20a + - const: chipidea,usb2 + - items: + - enum: + - nuvoton,npcm845-udc + - const: nuvoton,npcm750-udc + + reg: + minItems: 1 + maxItems: 2 + + interrupts: + minItems: 1 + maxItems: 2 + + clocks: + minItems: 1 + maxItems: 3 + + clock-names: + minItems: 1 + maxItems: 3 + + dr_mode: true + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + reset-names: + maxItems: 1 + + "#reset-cells": + const: 1 + + phy_type: true + + itc-setting: + description: + interrupt threshold control register control, the setting should be + aligned with ITC bits at register USBCMD. + $ref: /schemas/types.yaml#/definitions/uint32 + + ahb-burst-config: + description: + it is vendor dependent, the required value should be aligned with + AHBBRST at SBUSCFG, the range is from 0x0 to 0x7. This property is + used to change AHB burst configuration, check the chipidea spec for + meaning of each value. If this property is not existed, it will use + the reset value. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0x0 + maximum: 0x7 + + tx-burst-size-dword: + description: + it is vendor dependent, the tx burst size in dword (4 bytes), This + register represents the maximum length of a the burst in 32-bit + words while moving data from system memory to the USB bus, the value + of this property will only take effect if property "ahb-burst-config" + is set to 0, if this property is missing the reset default of the + hardware implementation will be used. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0x0 + maximum: 0x20 + + rx-burst-size-dword: + description: + it is vendor dependent, the rx burst size in dword (4 bytes), This + register represents the maximum length of a the burst in 32-bit words + while moving data from the USB bus to system memory, the value of + this property will only take effect if property "ahb-burst-config" + is set to 0, if this property is missing the reset default of the + hardware implementation will be used. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0x0 + maximum: 0x20 + + extcon: + description: + Phandles to external connector devices. First phandle should point + to external connector, which provide "USB" cable events, the second + should point to external connector device, which provide "USB-HOST" + cable events. If one of the external connector devices is not + required, empty <0> phandle should be specified. + $ref: /schemas/types.yaml#/definitions/phandle-array + minItems: 1 + items: + - description: vbus extcon + - description: id extcon + + phy-clkgate-delay-us: + description: + The delay time (us) between putting the PHY into low power mode and + gating the PHY clock. + + non-zero-ttctrl-ttha: + description: + After setting this property, the value of register ttctrl.ttha + will be 0x7f; if not, the value will be 0x0, this is the default + value. It needs to be very carefully for setting this property, it + is recommended that consult with your IC engineer before setting + this value. On the most of chipidea platforms, the "usage_tt" flag + at RTL is 0, so this property only affects siTD. + + If this property is not set, the max packet size is 1023 bytes, and + if the total of packet size for previous transactions are more than + 256 bytes, it can't accept any transactions within this frame. The + use case is single transaction, but higher frame rate. + + If this property is set, the max packet size is 188 bytes, it can + handle more transactions than above case, it can accept transactions + until it considers the left room size within frame is less than 188 + bytes, software needs to make sure it does not send more than 90% + maximum_periodic_data_per_frame. The use case is multiple + transactions, but less frame rate. + type: boolean + + mux-controls: + description: + The mux control for toggling host/device output of this controller. + It's expected that a mux state of 0 indicates device mode and a mux + state of 1 indicates host mode. + maxItems: 1 + + mux-control-names: + const: usb_switch + + operating-points-v2: + description: A phandle to the OPP table containing the performance states. + $ref: /schemas/types.yaml#/definitions/phandle + + pinctrl-names: + description: + Names for optional pin modes in "default", "host", "device". + In case of HSIC-mode, "idle" and "active" pin modes are mandatory. + In this case, the "idle" state needs to pull down the data and + strobe pin and the "active" state needs to pull up the strobe pin. + oneOf: + - items: + - const: idle + - const: active + - items: + - const: default + - enum: + - host + - device + - items: + - const: default + + pinctrl-0: + maxItems: 1 + + pinctrl-1: + maxItems: 1 + + phys: + maxItems: 1 + + phy-names: + const: usb-phy + + phy-select: + description: + Phandler of TCSR node with two argument that indicate register + offset, and phy index + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - description: phandle to TCSR node + - description: register offset + - description: phy index + + vbus-supply: + description: reference to the VBUS regulator. + + fsl,usbmisc: + description: + Phandler of non-core register device, with one argument that + indicate usb controller index + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to usbmisc node + - description: index of usb controller + + fsl,anatop: + description: phandle for the anatop node. + $ref: /schemas/types.yaml#/definitions/phandle + + disable-over-current: + type: boolean + description: disable over current detect + + over-current-active-low: + type: boolean + description: over current signal polarity is active low + + over-current-active-high: + type: boolean + description: + Over current signal polarity is active high. It's recommended to + specify the over current polarity. + + power-active-high: + type: boolean + description: power signal polarity is active high + + external-vbus-divider: + type: boolean + description: enables off-chip resistor divider for Vbus + + samsung,picophy-pre-emp-curr-control: + description: + HS Transmitter Pre-Emphasis Current Control. This signal controls + the amount of current sourced to the USB_OTG*_DP and USB_OTG*_DN + pins after a J-to-K or K-to-J transition. The range is from 0x0 to + 0x3, the default value is 0x1. Details can refer to TXPREEMPAMPTUNE0 + bits of USBNC_n_PHY_CFG1. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0x0 + maximum: 0x3 + + samsung,picophy-dc-vol-level-adjust: + description: + HS DC Voltage Level Adjustment. Adjust the high-speed transmitter DC + level voltage. The range is from 0x0 to 0xf, the default value is + 0x3. Details can refer to TXVREFTUNE0 bits of USBNC_n_PHY_CFG1. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0x0 + maximum: 0xf + + fsl,picophy-rise-fall-time-adjust: + description: + HS Transmitter Rise/Fall Time Adjustment. Adjust the rise/fall times + of the high-speed transmitter waveform. It has no unit. The rise/fall + time will be increased or decreased by a certain percentage relative + to design default time. (0:-10%; 1:design default; 2:+15%; 3:+20%) + Details can refer to TXRISETUNE0 bit of USBNC_n_PHY_CFG1. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 + default: 1 + + usb-phy: + description: phandle for the PHY device. Use "phys" instead. + $ref: /schemas/types.yaml#/definitions/phandle + deprecated: true + + fsl,usbphy: + description: phandle of usb phy that connects to the port. Use "phys" instead. + $ref: /schemas/types.yaml#/definitions/phandle + deprecated: true + + nvidia,phy: + description: phandle of usb phy that connects to the port. Use "phys" instead. + $ref: /schemas/types.yaml#/definitions/phandle + deprecated: true + + nvidia,needs-double-reset: + description: Indicates double reset or not. + type: boolean + deprecated: true + + port: + description: + Any connector to the data bus of this controller should be modelled + using the OF graph bindings specified, if the "usb-role-switch" + property is used. + $ref: /schemas/graph.yaml#/properties/port + + reset-gpios: + maxItems: 1 + + ulpi: + type: object + additionalProperties: false + patternProperties: + "^phy(-[0-9])?$": + description: The phy child node for Qcom chips. + type: object + $ref: /schemas/phy/qcom,usb-hs-phy.yaml + +dependencies: + port: [ usb-role-switch ] + mux-controls: [ mux-control-names ] + +required: + - compatible + - reg + - interrupts + +allOf: + - $ref: usb-hcd.yaml# + - $ref: usb-drd.yaml# + - if: + properties: + phy_type: + const: hsic + required: + - phy_type + then: + properties: + pinctrl-names: + items: + - const: idle + - const: active + else: + properties: + pinctrl-names: + minItems: 1 + maxItems: 2 + oneOf: + - items: + - const: default + - enum: + - host + - device + - items: + - const: default + - if: + properties: + compatible: + contains: + enum: + - chipidea,usb2 + - lsi,zevio-usb + - nuvoton,npcm750-udc + - nvidia,tegra20-udc + - nvidia,tegra30-udc + - nvidia,tegra114-udc + - nvidia,tegra124-udc + - qcom,ci-hdrc + - xlnx,zynq-usb-2.20a + then: + properties: + fsl,usbmisc: false + disable-over-current: false + over-current-active-low: false + over-current-active-high: false + power-active-high: false + external-vbus-divider: false + samsung,picophy-pre-emp-curr-control: false + samsung,picophy-dc-vol-level-adjust: false + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/berlin2.h> + + usb@f7ed0000 { + compatible = "chipidea,usb2"; + reg = <0xf7ed0000 0x10000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&chip CLKID_USB0>; + phys = <&usb_phy0>; + phy-names = "usb-phy"; + vbus-supply = <®_usb0_vbus>; + itc-setting = <0x4>; /* 4 micro-frames */ + /* Incremental burst of unspecified length */ + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x10>; /* 64 bytes */ + rx-burst-size-dword = <0x10>; + extcon = <0>, <&usb_id>; + phy-clkgate-delay-us = <400>; + mux-controls = <&usb_switch>; + mux-control-names = "usb_switch"; + }; + + # Example for HSIC: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/imx6qdl-clock.h> + + usb@2184400 { + compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; + reg = <0x02184400 0x200>; + interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6QDL_CLK_USBOH3>; + fsl,usbphy = <&usbphynop1>; + fsl,usbmisc = <&usbmisc 2>; + phy_type = "hsic"; + dr_mode = "host"; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x10>; + rx-burst-size-dword = <0x10>; + pinctrl-names = "idle", "active"; + pinctrl-0 = <&pinctrl_usbh2_idle>; + pinctrl-1 = <&pinctrl_usbh2_active>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet@1 { + compatible = "usb424,9730"; + reg = <1>; + }; + }; + +... diff --git a/dts/Bindings/usb/cypress,cypd4226.yaml b/dts/Bindings/usb/cypress,cypd4226.yaml new file mode 100644 index 0000000000..89fc9a434d --- /dev/null +++ b/dts/Bindings/usb/cypress,cypd4226.yaml @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/cypress,cypd4226.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cypress cypd4226 Type-C Controller + +maintainers: + - Wayne Chang <waynec@nvidia.com> + +description: + The Cypress cypd4226 is a dual Type-C controller that is controlled + via an I2C interface. + +properties: + compatible: + const: cypress,cypd4226 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + reg: + const: 0x08 + + interrupts: + items: + - description: cypd4226 host interrupt + + firmware-name: + enum: + - nvidia,gpu + - nvidia,jetson-agx-xavier + description: | + The name of the CCGx firmware built for product series. + should be set one of following: + - "nvidia,gpu" for the NVIDIA RTX product series + - "nvidia,jetson-agx-xavier" for the NVIDIA Jetson product series + +patternProperties: + '^connector@[01]$': + $ref: /schemas/connector/usb-connector.yaml# + required: + - reg + +required: + - compatible + - reg + - interrupts + +anyOf: + - required: + - connector@0 + - required: + - connector@1 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/tegra194-gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <2>; + + typec@8 { + compatible = "cypress,cypd4226"; + reg = <0x08>; + interrupt-parent = <&gpio_aon>; + interrupts = <TEGRA194_AON_GPIO(BB, 2) IRQ_TYPE_LEVEL_LOW>; + firmware-name = "nvidia,jetson-agx-xavier"; + #address-cells = <1>; + #size-cells = <0>; + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + label = "USB-C"; + data-role = "dual"; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&usb_role_switch0>; + }; + }; + }; + }; + }; + }; diff --git a/dts/Bindings/usb/cypress,hx3.yaml b/dts/Bindings/usb/cypress,hx3.yaml new file mode 100644 index 0000000000..47add0d85f --- /dev/null +++ b/dts/Bindings/usb/cypress,hx3.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/cypress,hx3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cypress HX3 USB 3.0 hub controller family + +maintainers: + - Benjamin Bara <benjamin.bara@skidata.com> + +allOf: + - $ref: usb-device.yaml# + +properties: + compatible: + enum: + - usb4b4,6504 + - usb4b4,6506 + + reg: true + + reset-gpios: + items: + - description: GPIO specifier for RESETN pin. + + vdd-supply: + description: + 1V2 power supply (VDD_EFUSE, AVDD12, DVDD12). + + vdd2-supply: + description: + 3V3 power supply (AVDD33, VDD_IO). + + peer-hub: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to the peer hub on the controller. + +required: + - compatible + - reg + - peer-hub + - vdd-supply + - vdd2-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + usb { + dr_mode = "host"; + #address-cells = <1>; + #size-cells = <0>; + + /* 2.0 hub on port 1 */ + hub_2_0: hub@1 { + compatible = "usb4b4,6504"; + reg = <1>; + peer-hub = <&hub_3_0>; + reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + vdd-supply = <®_1v2_usb>; + vdd2-supply = <®_3v3_usb>; + }; + + /* 3.0 hub on port 2 */ + hub_3_0: hub@2 { + compatible = "usb4b4,6506"; + reg = <2>; + peer-hub = <&hub_2_0>; + reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + vdd-supply = <®_1v2_usb>; + vdd2-supply = <®_3v3_usb>; + }; + }; diff --git a/dts/Bindings/usb/da8xx-usb.txt b/dts/Bindings/usb/da8xx-usb.txt index 9ce22551b2..fb2027a7d8 100644 --- a/dts/Bindings/usb/da8xx-usb.txt +++ b/dts/Bindings/usb/da8xx-usb.txt @@ -36,7 +36,8 @@ DMA - #dma-cells: should be set to 2. The first number represents the channel number (0 … 3 for endpoints 1 … 4). The second number is 0 for RX and 1 for TX transfers. -- #dma-channels: should be set to 4 representing the 4 endpoints. +- dma-channels: should be set to 4 representing the 4 endpoints. +- #dma-channels: deprecated Example: usb_phy: usb-phy { @@ -74,7 +75,7 @@ Example: reg-names = "controller", "scheduler", "queuemgr"; interrupts = <58>; #dma-cells = <2>; - #dma-channels = <4>; + dma-channels = <4>; }; }; diff --git a/dts/Bindings/usb/dwc2.yaml b/dts/Bindings/usb/dwc2.yaml index 56a818478c..0a5c98ea71 100644 --- a/dts/Bindings/usb/dwc2.yaml +++ b/dts/Bindings/usb/dwc2.yaml @@ -4,19 +4,27 @@ $id: http://devicetree.org/schemas/usb/dwc2.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: DesignWare HS OTG USB 2.0 controller Bindings +title: DesignWare HS OTG USB 2.0 controller maintainers: - Rob Herring <robh@kernel.org> allOf: - $ref: usb-drd.yaml# + - $ref: usb-hcd.yaml# properties: compatible: oneOf: - const: brcm,bcm2835-usb - const: hisilicon,hi6220-usb + - const: ingenic,jz4775-otg + - const: ingenic,jz4780-otg + - const: ingenic,x1000-otg + - const: ingenic,x1600-otg + - const: ingenic,x1700-otg + - const: ingenic,x1830-otg + - const: ingenic,x2000-otg - items: - const: rockchip,rk3066-usb - const: snps,dwc2 @@ -24,6 +32,7 @@ properties: - enum: - rockchip,px30-usb - rockchip,rk3036-usb + - rockchip,rk3128-usb - rockchip,rk3188-usb - rockchip,rk3228-usb - rockchip,rk3288-usb @@ -34,13 +43,18 @@ properties: - const: rockchip,rk3066-usb - const: snps,dwc2 - const: lantiq,arx100-usb + - const: lantiq,ase-usb + - const: lantiq,danube-usb - const: lantiq,xrx200-usb + - const: lantiq,xrx300-usb - items: - enum: - amlogic,meson8-usb - amlogic,meson8b-usb - amlogic,meson-gxbb-usb - amlogic,meson-g12a-usb + - amlogic,meson-a1-usb + - intel,socfpga-agilex-hsotg - const: snps,dwc2 - const: amcc,dwc-otg - const: apm,apm82181-dwc-otg @@ -53,6 +67,7 @@ properties: - const: st,stm32mp15-hsotg - const: snps,dwc2 - const: samsung,s3c6400-hsotg + - const: intel,socfpga-agilex-hsotg reg: maxItems: 1 @@ -61,11 +76,21 @@ properties: maxItems: 1 clocks: - maxItems: 1 + minItems: 1 + maxItems: 2 clock-names: items: - const: otg + - const: utmi + minItems: 1 + + disable-over-current: + type: boolean + description: whether to disable detection of over-current condition. + + iommus: + maxItems: 1 resets: items: @@ -114,6 +139,8 @@ properties: usb-role-switch: true + role-switch-default-mode: true + g-rx-fifo-size: $ref: /schemas/types.yaml#/definitions/uint32 description: size of rx fifo size in gadget mode. @@ -128,14 +155,27 @@ properties: snps,need-phy-for-wake: $ref: /schemas/types.yaml#/definitions/flag - description: If present indicates that the phy needs to be left on for + description: If present indicates that the phy needs to be left on for remote wakeup during suspend. snps,reset-phy-on-wake: $ref: /schemas/types.yaml#/definitions/flag - description: If present indicates that we need to reset the PHY when we + description: If present indicates that we need to reset the PHY when we detect a wakeup. This is due to a hardware errata. + port: + description: + Any connector to the data bus of this controller should be modelled + using the OF graph bindings specified, if the "usb-role-switch" + property is used. + $ref: /schemas/graph.yaml#/properties/port + + tpl-support: true + +dependencies: + port: [ usb-role-switch ] + role-switch-default-mode: [ usb-role-switch ] + required: - compatible - reg diff --git a/dts/Bindings/usb/dwc3-cavium.txt b/dts/Bindings/usb/dwc3-cavium.txt index 710b782ccf..171df79360 100644 --- a/dts/Bindings/usb/dwc3-cavium.txt +++ b/dts/Bindings/usb/dwc3-cavium.txt @@ -20,7 +20,7 @@ Example device node: refclk-type-hs = "dlmc_ref_clk0"; power = <0x00000002 0x00000002 0x00000001>; xhci@1690000000000 { - compatible = "cavium,octeon-7130-xhci", "synopsys,dwc3"; + compatible = "cavium,octeon-7130-xhci", "snps,dwc3"; reg = <0x00016900 0x00000000 0x00000010 0x00000000>; interrupt-parent = <0x00000010>; interrupts = <0x00000009 0x00000004>; diff --git a/dts/Bindings/usb/dwc3-st.txt b/dts/Bindings/usb/dwc3-st.txt index bf73de0d5b..4aa368447b 100644 --- a/dts/Bindings/usb/dwc3-st.txt +++ b/dts/Bindings/usb/dwc3-st.txt @@ -13,7 +13,7 @@ Required properties: - resets : list of phandle and reset specifier pairs. There should be two entries, one for the powerdown and softreset lines of the usb3 IP - reset-names : list of reset signal names. Names should be "powerdown" and "softreset" -See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt +See: Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml See: Documentation/devicetree/bindings/reset/reset.txt - #address-cells, #size-cells : should be '1' if the device has sub-nodes diff --git a/dts/Bindings/usb/dwc3-xilinx.txt b/dts/Bindings/usb/dwc3-xilinx.txt deleted file mode 100644 index 04813a46e5..0000000000 --- a/dts/Bindings/usb/dwc3-xilinx.txt +++ /dev/null @@ -1,56 +0,0 @@ -Xilinx SuperSpeed DWC3 USB SoC controller - -Required properties: -- compatible: May contain "xlnx,zynqmp-dwc3" or "xlnx,versal-dwc3" -- reg: Base address and length of the register control block -- clocks: A list of phandles for the clocks listed in clock-names -- clock-names: Should contain the following: - "bus_clk" Master/Core clock, have to be >= 125 MHz for SS - operation and >= 60MHz for HS operation - - "ref_clk" Clock source to core during PHY power down -- resets: A list of phandles for resets listed in reset-names -- reset-names: - "usb_crst" USB core reset - "usb_hibrst" USB hibernation reset - "usb_apbrst" USB APB reset - -Required child node: -A child node must exist to represent the core DWC3 IP block. The name of -the node is not important. The content of the node is defined in dwc3.txt. - -Optional properties for snps,dwc3: -- dma-coherent: Enable this flag if CCI is enabled in design. Adding this - flag configures Global SoC bus Configuration Register and - Xilinx USB 3.0 IP - USB coherency register to enable CCI. -- interrupt-names: Should contain the following: - "dwc_usb3" USB gadget mode interrupts - "otg" USB OTG mode interrupts - "hiber" USB hibernation interrupts - -Example device node: - - usb@0 { - #address-cells = <0x2>; - #size-cells = <0x1>; - compatible = "xlnx,zynqmp-dwc3"; - reg = <0x0 0xff9d0000 0x0 0x100>; - clock-names = "bus_clk", "ref_clk"; - clocks = <&clk125>, <&clk125>; - resets = <&zynqmp_reset ZYNQMP_RESET_USB1_CORERESET>, - <&zynqmp_reset ZYNQMP_RESET_USB1_HIBERRESET>, - <&zynqmp_reset ZYNQMP_RESET_USB1_APB>; - reset-names = "usb_crst", "usb_hibrst", "usb_apbrst"; - ranges; - - dwc3@fe200000 { - compatible = "snps,dwc3"; - reg = <0x0 0xfe200000 0x40000>; - interrupt-names = "dwc_usb3", "otg", "hiber"; - interrupts = <0 65 4>, <0 69 4>, <0 75 4>; - phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; - phy-names = "usb3-phy"; - dr_mode = "host"; - dma-coherent; - }; - }; diff --git a/dts/Bindings/usb/dwc3-xilinx.yaml b/dts/Bindings/usb/dwc3-xilinx.yaml new file mode 100644 index 0000000000..00f87a558c --- /dev/null +++ b/dts/Bindings/usb/dwc3-xilinx.yaml @@ -0,0 +1,136 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/dwc3-xilinx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx SuperSpeed DWC3 USB SoC controller + +maintainers: + - Mubin Sayyed <mubin.sayyed@amd.com> + - Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> + +properties: + compatible: + items: + - enum: + - xlnx,zynqmp-dwc3 + - xlnx,versal-dwc3 + reg: + maxItems: 1 + + "#address-cells": + enum: [ 1, 2 ] + + "#size-cells": + enum: [ 1, 2 ] + + ranges: true + + power-domains: + description: specifies a phandle to PM domain provider node + maxItems: 1 + + clocks: + description: + A list of phandle and clock-specifier pairs for the clocks + listed in clock-names. + items: + - description: Master/Core clock, has to be >= 125 MHz + for SS operation and >= 60MHz for HS operation. + - description: Clock source to core during PHY power down. + + clock-names: + items: + - const: bus_clk + - const: ref_clk + + resets: + description: + A list of phandles for resets listed in reset-names. + + items: + - description: USB core reset + - description: USB hibernation reset + - description: USB APB reset + + reset-names: + items: + - const: usb_crst + - const: usb_hibrst + - const: usb_apbrst + + phys: + minItems: 1 + maxItems: 2 + + phy-names: + minItems: 1 + maxItems: 2 + items: + enum: + - usb2-phy + - usb3-phy + + reset-gpios: + description: GPIO used for the reset ulpi-phy + maxItems: 1 + +# Required child node: + +patternProperties: + "^usb@[0-9a-f]+$": + $ref: snps,dwc3.yaml# + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - ranges + - power-domains + - clocks + - clock-names + - resets + - reset-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/dma/xlnx-zynqmp-dpdma.h> + #include <dt-bindings/power/xlnx-zynqmp-power.h> + #include <dt-bindings/reset/xlnx-zynqmp-resets.h> + #include <dt-bindings/clock/xlnx-zynqmp-clk.h> + #include <dt-bindings/reset/xlnx-zynqmp-resets.h> + #include <dt-bindings/phy/phy.h> + axi { + #address-cells = <2>; + #size-cells = <2>; + + usb@0 { + #address-cells = <0x2>; + #size-cells = <0x2>; + compatible = "xlnx,zynqmp-dwc3"; + reg = <0x0 0xff9d0000 0x0 0x100>; + clocks = <&zynqmp_clk USB0_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>; + clock-names = "bus_clk", "ref_clk"; + power-domains = <&zynqmp_firmware PD_USB_0>; + resets = <&zynqmp_reset ZYNQMP_RESET_USB1_CORERESET>, + <&zynqmp_reset ZYNQMP_RESET_USB1_HIBERRESET>, + <&zynqmp_reset ZYNQMP_RESET_USB1_APB>; + reset-names = "usb_crst", "usb_hibrst", "usb_apbrst"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; + phy-names = "usb3-phy"; + ranges; + + usb@fe200000 { + compatible = "snps,dwc3"; + reg = <0x0 0xfe200000 0x0 0x40000>; + interrupt-names = "host", "otg"; + interrupts = <0 65 4>, <0 69 4>; + dr_mode = "host"; + dma-coherent; + }; + }; + }; diff --git a/dts/Bindings/usb/ehci-omap.txt b/dts/Bindings/usb/ehci-omap.txt deleted file mode 100644 index d77e11a975..0000000000 --- a/dts/Bindings/usb/ehci-omap.txt +++ /dev/null @@ -1,31 +0,0 @@ -OMAP HS USB EHCI controller - -This device is usually the child of the omap-usb-host -Documentation/devicetree/bindings/mfd/omap-usb-host.txt - -Required properties: - -- compatible: should be "ti,ehci-omap" -- reg: should contain one register range i.e. start and length -- interrupts: description of the interrupt line - -Optional properties: - -- phys: list of phandles to PHY nodes. - This property is required if at least one of the ports are in - PHY mode i.e. OMAP_EHCI_PORT_MODE_PHY - -To specify the port mode, see -Documentation/devicetree/bindings/mfd/omap-usb-host.txt - -Example for OMAP4: - -usbhsehci: ehci@4a064c00 { - compatible = "ti,ehci-omap"; - reg = <0x4a064c00 0x400>; - interrupts = <0 77 0x4>; -}; - -&usbhsehci { - phys = <&hsusb1_phy 0 &hsusb3_phy>; -}; diff --git a/dts/Bindings/usb/ehci-orion.txt b/dts/Bindings/usb/ehci-orion.txt deleted file mode 100644 index 2855bae79f..0000000000 --- a/dts/Bindings/usb/ehci-orion.txt +++ /dev/null @@ -1,22 +0,0 @@ -* EHCI controller, Orion Marvell variants - -Required properties: -- compatible: must be one of the following - "marvell,orion-ehci" - "marvell,armada-3700-ehci" -- reg: physical base address of the controller and length of memory mapped - region. -- interrupts: The EHCI interrupt - -Optional properties: -- clocks: reference to the clock -- phys: reference to the USB PHY -- phy-names: name of the USB PHY, should be "usb" - -Example: - - ehci@50000 { - compatible = "marvell,orion-ehci"; - reg = <0x50000 0x1000>; - interrupts = <19>; - }; diff --git a/dts/Bindings/usb/ehci-st.txt b/dts/Bindings/usb/ehci-st.txt index 065c91d955..d6f2bdee20 100644 --- a/dts/Bindings/usb/ehci-st.txt +++ b/dts/Bindings/usb/ehci-st.txt @@ -17,7 +17,7 @@ See: Documentation/devicetree/bindings/clock/clock-bindings.txt - resets : phandle + reset specifier pairs to the powerdown and softreset lines of the USB IP - reset-names : should be "power" and "softreset" -See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt +See: Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml See: Documentation/devicetree/bindings/reset/reset.txt Example: diff --git a/dts/Bindings/usb/exynos-usb.txt b/dts/Bindings/usb/exynos-usb.txt deleted file mode 100644 index f7ae79825d..0000000000 --- a/dts/Bindings/usb/exynos-usb.txt +++ /dev/null @@ -1,115 +0,0 @@ -Samsung Exynos SoC USB controller - -The USB devices interface with USB controllers on Exynos SOCs. -The device node has following properties. - -EHCI -Required properties: - - compatible: should be "samsung,exynos4210-ehci" for USB 2.0 - EHCI controller in host mode. - - reg: physical base address of the controller and length of memory mapped - region. - - interrupts: interrupt number to the cpu. - - clocks: from common clock binding: handle to usb clock. - - clock-names: from common clock binding: Shall be "usbhost". - - phys: from the *Generic PHY* bindings; array specifying phy(s) used - by the root port. - - phy-names: from the *Generic PHY* bindings; array of the names for - each phy for the root ports, must be a subset of the following: - "host", "hsic0", "hsic1". - -Optional properties: - - samsung,vbus-gpio: if present, specifies the GPIO that - needs to be pulled up for the bus to be powered. - -Example: - - usb@12110000 { - compatible = "samsung,exynos4210-ehci"; - reg = <0x12110000 0x100>; - interrupts = <0 71 0>; - samsung,vbus-gpio = <&gpx2 6 1 3 3>; - - clocks = <&clock 285>; - clock-names = "usbhost"; - - phys = <&usb2phy 1>; - phy-names = "host"; - }; - -OHCI -Required properties: - - compatible: should be "samsung,exynos4210-ohci" for USB 2.0 - OHCI companion controller in host mode. - - reg: physical base address of the controller and length of memory mapped - region. - - interrupts: interrupt number to the cpu. - - clocks: from common clock binding: handle to usb clock. - - clock-names: from common clock binding: Shall be "usbhost". - - phys: from the *Generic PHY* bindings; array specifying phy(s) used - by the root port. - - phy-names: from the *Generic PHY* bindings; array of the names for - each phy for the root ports, must be a subset of the following: - "host", "hsic0", "hsic1". - -Example: - usb@12120000 { - compatible = "samsung,exynos4210-ohci"; - reg = <0x12120000 0x100>; - interrupts = <0 71 0>; - - clocks = <&clock 285>; - clock-names = "usbhost"; - - phys = <&usb2phy 1>; - phy-names = "host"; - }; - -DWC3 -Required properties: - - compatible: should be one of the following - - "samsung,exynos5250-dwusb3": for USB 3.0 DWC3 controller on - Exynos5250/5420. - "samsung,exynos5433-dwusb3": for USB 3.0 DWC3 controller on - Exynos5433. - "samsung,exynos7-dwusb3": for USB 3.0 DWC3 controller on Exynos7. - - #address-cells, #size-cells : should be '1' if the device has sub-nodes - with 'reg' property. - - ranges: allows valid 1:1 translation between child's address space and - parent's address space - - clocks: Clock IDs array as required by the controller. - - clock-names: Names of clocks corresponding to IDs in the clock property. - Following clock names shall be provided for different - compatibles: - - samsung,exynos5250-dwusb3: "usbdrd30", - - samsung,exynos5433-dwusb3: "aclk", "susp_clk", "pipe_pclk", - "phyclk", - - samsung,exynos7-dwusb3: "usbdrd30", "usbdrd30_susp_clk", - "usbdrd30_axius_clk" - - vdd10-supply: 1.0V powr supply - - vdd33-supply: 3.0V/3.3V power supply - -Sub-nodes: -The dwc3 core should be added as subnode to Exynos dwc3 glue. -- dwc3 : - The binding details of dwc3 can be found in: - Documentation/devicetree/bindings/usb/snps,dwc3.yaml - -Example: - usb@12000000 { - compatible = "samsung,exynos5250-dwusb3"; - clocks = <&clock 286>; - clock-names = "usbdrd30"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - vdd10-supply = <&ldo11_reg>; - vdd33-supply = <&ldo9_reg>; - - dwc3 { - compatible = "synopsys,dwc3"; - reg = <0x12000000 0x10000>; - interrupts = <0 72 0>; - usb-phy = <&usb2_phy &usb3_phy>; - }; - }; diff --git a/dts/Bindings/usb/faraday,fotg210.txt b/dts/Bindings/usb/faraday,fotg210.txt deleted file mode 100644 index 06a2286e20..0000000000 --- a/dts/Bindings/usb/faraday,fotg210.txt +++ /dev/null @@ -1,35 +0,0 @@ -Faraday FOTG Host controller - -This OTG-capable USB host controller is found in Cortina Systems -Gemini and other SoC products. - -Required properties: -- compatible: should be one of: - "faraday,fotg210" - "cortina,gemini-usb", "faraday,fotg210" -- reg: should contain one register range i.e. start and length -- interrupts: description of the interrupt line - -Optional properties: -- clocks: should contain the IP block clock -- clock-names: should be "PCLK" for the IP block clock - -Required properties for "cortina,gemini-usb" compatible: -- syscon: a phandle to the system controller to access PHY registers - -Optional properties for "cortina,gemini-usb" compatible: -- cortina,gemini-mini-b: boolean property that indicates that a Mini-B - OTG connector is in use -- wakeup-source: see power/wakeup-source.txt - -Example for Gemini: - -usb@68000000 { - compatible = "cortina,gemini-usb", "faraday,fotg210"; - reg = <0x68000000 0x1000>; - interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cc 12>; - clock-names = "PCLK"; - syscon = <&syscon>; - wakeup-source; -}; diff --git a/dts/Bindings/usb/faraday,fotg210.yaml b/dts/Bindings/usb/faraday,fotg210.yaml new file mode 100644 index 0000000000..3fe4d1564d --- /dev/null +++ b/dts/Bindings/usb/faraday,fotg210.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2022 Linaro Ltd. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/faraday,fotg210.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Faraday Technology FOTG200 series HS OTG USB 2.0 controller + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +allOf: + - $ref: usb-drd.yaml# + - $ref: usb-hcd.yaml# + +properties: + compatible: + oneOf: + - const: faraday,fotg200 + - const: faraday,fotg210 + - items: + - const: cortina,gemini-usb + - const: faraday,fotg200 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: PCLK + + resets: + maxItems: 1 + + syscon: + $ref: /schemas/types.yaml#/definitions/phandle + description: a phandle to the global Gemini system controller on + Gemini systems + + dr_mode: true + + phys: + maxItems: 1 + + phy-names: + const: usb2-phy + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/cortina,gemini-clock.h> + #include <dt-bindings/reset/cortina,gemini-reset.h> + usb0: usb@68000000 { + compatible = "cortina,gemini-usb", "faraday,fotg200"; + reg = <0x68000000 0x1000>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; + resets = <&syscon GEMINI_RESET_USB0>; + clocks = <&syscon GEMINI_CLK_GATE_USB0>; + clock-names = "PCLK"; + syscon = <&syscon>; + dr_mode = "host"; + }; diff --git a/dts/Bindings/usb/fcs,fsa4480.yaml b/dts/Bindings/usb/fcs,fsa4480.yaml new file mode 100644 index 0000000000..f9410eb76a --- /dev/null +++ b/dts/Bindings/usb/fcs,fsa4480.yaml @@ -0,0 +1,109 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/fcs,fsa4480.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ON Semiconductor Analog Audio Switch + +maintainers: + - Bjorn Andersson <bjorn.andersson@linaro.org> + +properties: + compatible: + oneOf: + - const: fcs,fsa4480 + - items: + - enum: + - ocs,ocp96011 + - const: fcs,fsa4480 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vcc-supply: + description: power supply (2.7V-5.5V) + + mode-switch: + description: Flag the port as possible handle of altmode switching + type: boolean + + orientation-switch: + description: Flag the port as possible handler of orientation switching + type: boolean + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + description: + A port node to link the FSA4480 to a TypeC controller for the purpose of + handling altmode muxing and orientation switching. + unevaluatedProperties: false + + properties: + endpoint: + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false + + properties: + data-lanes: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + Specifies how the AUX+/- lines are connected to SBU1/2. + oneOf: + - items: + - const: 0 + - const: 1 + description: | + Default AUX/SBU layout (FSA4480) + - AUX+ connected to SBU2 + - AUX- connected to SBU1 + Default AUX/SBU layout (OCP96011) + - AUX+ connected to SBU1 + - AUX- connected to SBU2 + - items: + - const: 1 + - const: 0 + description: | + Swapped AUX/SBU layout (FSA4480) + - AUX+ connected to SBU1 + - AUX- connected to SBU2 + Swapped AUX/SBU layout (OCP96011) + - AUX+ connected to SBU2 + - AUX- connected to SBU1 + +required: + - compatible + - reg + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c13 { + #address-cells = <1>; + #size-cells = <0>; + + typec-mux@42 { + compatible = "fcs,fsa4480"; + reg = <0x42>; + + interrupts-extended = <&tlmm 2 IRQ_TYPE_LEVEL_LOW>; + + vcc-supply = <&vreg_bob>; + + mode-switch; + orientation-switch; + + port { + fsa4480_ept: endpoint { + remote-endpoint = <&typec_controller>; + }; + }; + }; + }; +... diff --git a/dts/Bindings/usb/fcs,fusb302.txt b/dts/Bindings/usb/fcs,fusb302.txt deleted file mode 100644 index 60e4654297..0000000000 --- a/dts/Bindings/usb/fcs,fusb302.txt +++ /dev/null @@ -1,34 +0,0 @@ -Fairchild FUSB302 Type-C Port controllers - -Required properties : -- compatible : "fcs,fusb302" -- reg : I2C slave address -- interrupts : Interrupt specifier - -Required sub-node: -- connector : The "usb-c-connector" attached to the FUSB302 IC. The bindings - of the connector node are specified in: - - Documentation/devicetree/bindings/connector/usb-connector.yaml - - -Example: - -fusb302: typec-portc@54 { - compatible = "fcs,fusb302"; - reg = <0x54>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - - usb_con: connector { - compatible = "usb-c-connector"; - label = "USB-C"; - power-role = "dual"; - try-power-role = "sink"; - source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; - sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM) - PDO_VAR(3000, 12000, 3000) - PDO_PPS_APDO(3000, 11000, 3000)>; - op-sink-microwatt = <10000000>; - }; -}; diff --git a/dts/Bindings/usb/fcs,fusb302.yaml b/dts/Bindings/usb/fcs,fusb302.yaml new file mode 100644 index 0000000000..b396ea0ab1 --- /dev/null +++ b/dts/Bindings/usb/fcs,fusb302.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/fcs,fusb302.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Fairchild FUSB302 Type-C Port controller + +maintainers: + - Rob Herring <robh@kernel.org> + +properties: + compatible: + const: fcs,fusb302 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vbus-supply: + description: VBUS power supply + + connector: + type: object + $ref: /schemas/connector/usb-connector.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - vbus-supply + - connector + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/usb/pd.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + typec-portc@54 { + compatible = "fcs,fusb302"; + reg = <0x54>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + vbus-supply = <&vbus_typec>; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "dual"; + try-power-role = "sink"; + source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; + sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM) + PDO_VAR(3000, 12000, 3000) + PDO_PPS_APDO(3000, 11000, 3000)>; + op-sink-microwatt = <10000000>; + }; + }; + }; diff --git a/dts/Bindings/usb/fsl,imx8mp-dwc3.yaml b/dts/Bindings/usb/fsl,imx8mp-dwc3.yaml index 974032b1fd..9ea1e4cd07 100644 --- a/dts/Bindings/usb/fsl,imx8mp-dwc3.yaml +++ b/dts/Bindings/usb/fsl,imx8mp-dwc3.yaml @@ -15,9 +15,9 @@ properties: const: fsl,imx8mp-dwc3 reg: - maxItems: 1 - description: Address and length of the register set for the wrapper of - dwc3 core on the SOC. + items: + - description: Address and length of the register set for HSIO Block Control + - description: Address and length of the register set for the wrapper of dwc3 core on the SOC. "#address-cells": enum: [ 1, 2 ] @@ -49,6 +49,31 @@ properties: - const: hsio - const: suspend + fsl,permanently-attached: + type: boolean + description: + Indicates if the device attached to a downstream port is + permanently attached. + + fsl,disable-port-power-control: + type: boolean + description: + Indicates whether the host controller implementation includes port + power control. Defines Bit 3 in capability register (HCCPARAMS). + + fsl,over-current-active-low: + type: boolean + description: + Over current signal polarity is active low. + + fsl,power-active-low: + type: boolean + description: + Power pad (PWR) polarity is active low. + + power-domains: + maxItems: 1 + # Required child node: patternProperties: @@ -65,20 +90,24 @@ required: - clocks - clock-names - interrupts + - power-domains additionalProperties: false examples: - | #include <dt-bindings/clock/imx8mp-clock.h> + #include <dt-bindings/power/imx8mp-power.h> #include <dt-bindings/interrupt-controller/arm-gic.h> usb3_0: usb@32f10100 { compatible = "fsl,imx8mp-dwc3"; - reg = <0x32f10100 0x8>; + reg = <0x32f10100 0x8>, + <0x381f0000 0x20>; clocks = <&clk IMX8MP_CLK_HSIO_ROOT>, <&clk IMX8MP_CLK_USB_ROOT>; clock-names = "hsio", "suspend"; interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB>; #address-cells = <1>; #size-cells = <1>; dma-ranges = <0x40000000 0x40000000 0xc0000000>; diff --git a/dts/Bindings/usb/fsl,imx8mq-dwc3.yaml b/dts/Bindings/usb/fsl,imx8mq-dwc3.yaml new file mode 100644 index 0000000000..50569d3ee7 --- /dev/null +++ b/dts/Bindings/usb/fsl,imx8mq-dwc3.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/fsl,imx8mq-dwc3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP iMX8MQ Soc USB Controller + +maintainers: + - Li Jun <jun.li@nxp.com> + - Peng Fan <peng.fan@nxp.com> + +select: + properties: + compatible: + contains: + enum: + - fsl,imx8mq-dwc3 + required: + - compatible + +properties: + compatible: + items: + - const: fsl,imx8mq-dwc3 + - const: snps,dwc3 + +allOf: + - $ref: snps,dwc3.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mq-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + usb_dwc3_1: usb@38200000 { + compatible = "fsl,imx8mq-dwc3", "snps,dwc3"; + reg = <0x38200000 0x10000>; + clocks = <&clk IMX8MQ_CLK_USB2_CTRL_ROOT>, + <&clk IMX8MQ_CLK_USB_CORE_REF>, + <&clk IMX8MQ_CLK_32K>; + clock-names = "bus_early", "ref", "suspend"; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb3_phy1>, <&usb3_phy1>; + phy-names = "usb2-phy", "usb3-phy"; + }; diff --git a/dts/Bindings/usb/fsl,imx8qm-cdns3.yaml b/dts/Bindings/usb/fsl,imx8qm-cdns3.yaml new file mode 100644 index 0000000000..ceb76394af --- /dev/null +++ b/dts/Bindings/usb/fsl,imx8qm-cdns3.yaml @@ -0,0 +1,103 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2020 NXP +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/fsl,imx8qm-cdns3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP iMX8QM Soc USB Controller + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + const: fsl,imx8qm-usb3 + + reg: + items: + - description: Register set for iMX USB3 Platform Control + + "#address-cells": + enum: [ 1, 2 ] + + "#size-cells": + enum: [ 1, 2 ] + + ranges: true + + clocks: + items: + - description: Standby clock. Used during ultra low power states. + - description: USB bus clock for usb3 controller. + - description: AXI clock for AXI interface. + - description: ipg clock for register access. + - description: Core clock for usb3 controller. + + clock-names: + items: + - const: lpm + - const: bus + - const: aclk + - const: ipg + - const: core + + power-domains: + maxItems: 1 + +# Required child node: + +patternProperties: + "^usb@[0-9a-f]+$": + $ref: cdns,usb3.yaml# + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - ranges + - clocks + - clock-names + - power-domains + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8-lpcg.h> + #include <dt-bindings/firmware/imx/rsrc.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + usb@5b110000 { + compatible = "fsl,imx8qm-usb3"; + reg = <0x5b110000 0x10000>; + ranges; + clocks = <&usb3_lpcg IMX_LPCG_CLK_1>, + <&usb3_lpcg IMX_LPCG_CLK_0>, + <&usb3_lpcg IMX_LPCG_CLK_7>, + <&usb3_lpcg IMX_LPCG_CLK_4>, + <&usb3_lpcg IMX_LPCG_CLK_5>; + clock-names = "lpm", "bus", "aclk", "ipg", "core"; + assigned-clocks = <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_MST_BUS>; + assigned-clock-rates = <250000000>; + power-domains = <&pd IMX_SC_R_USB_2>; + #address-cells = <1>; + #size-cells = <1>; + + usb@5b120000 { + compatible = "cdns,usb3"; + reg = <0x5b120000 0x10000>, /* memory area for OTG/DRD registers */ + <0x5b130000 0x10000>, /* memory area for HOST registers */ + <0x5b140000 0x10000>; /* memory area for DEVICE registers */ + reg-names = "otg", "xhci", "dev"; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host", "peripheral", "otg", "wakeup"; + phys = <&usb3_phy>; + phy-names = "cdns3,usb3-phy"; + }; + }; diff --git a/dts/Bindings/usb/fsl,usbmisc.yaml b/dts/Bindings/usb/fsl,usbmisc.yaml new file mode 100644 index 0000000000..2d3589d284 --- /dev/null +++ b/dts/Bindings/usb/fsl,usbmisc.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/fsl,usbmisc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX wrapper module for Chipidea USB2 controller + +maintainers: + - Xu Yang <xu.yang_2@nxp.com> + - Peng Fan <peng.fan@nxp.com> + +properties: + compatible: + oneOf: + - enum: + - fsl,imx25-usbmisc + - fsl,imx27-usbmisc + - fsl,imx35-usbmisc + - fsl,imx51-usbmisc + - fsl,imx53-usbmisc + - fsl,imx6q-usbmisc + - fsl,vf610-usbmisc + - items: + - enum: + - fsl,imx6ul-usbmisc + - fsl,imx6sl-usbmisc + - fsl,imx6sx-usbmisc + - fsl,imx7d-usbmisc + - const: fsl,imx6q-usbmisc + - items: + - enum: + - fsl,imx7ulp-usbmisc + - fsl,imx8mm-usbmisc + - fsl,imx8mn-usbmisc + - const: fsl,imx7d-usbmisc + - const: fsl,imx6q-usbmisc + - items: + - const: fsl,imx6sll-usbmisc + - const: fsl,imx6ul-usbmisc + - const: fsl,imx6q-usbmisc + + clocks: + maxItems: 1 + + reg: + maxItems: 1 + + '#index-cells': + const: 1 + description: Cells used to describe usb controller index. + deprecated: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + usbmisc@2184800 { + compatible = "fsl,imx6q-usbmisc"; + reg = <0x02184800 0x200>; + #index-cells = <1>; + }; + +... diff --git a/dts/Bindings/usb/generic-ehci.yaml b/dts/Bindings/usb/generic-ehci.yaml index 8913497624..87986c45be 100644 --- a/dts/Bindings/usb/generic-ehci.yaml +++ b/dts/Bindings/usb/generic-ehci.yaml @@ -4,13 +4,13 @@ $id: http://devicetree.org/schemas/usb/generic-ehci.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: USB EHCI Controller Device Tree Bindings +title: USB EHCI Controller maintainers: - Greg Kroah-Hartman <gregkh@linuxfoundation.org> allOf: - - $ref: "usb-hcd.yaml" + - $ref: usb-hcd.yaml - if: properties: compatible: @@ -30,6 +30,7 @@ properties: - allwinner,sun4i-a10-ehci - allwinner,sun50i-a64-ehci - allwinner,sun50i-h6-ehci + - allwinner,sun50i-h616-ehci - allwinner,sun5i-a13-ehci - allwinner,sun6i-a31-ehci - allwinner,sun7i-a20-ehci @@ -37,7 +38,9 @@ properties: - allwinner,sun8i-a83t-ehci - allwinner,sun8i-h3-ehci - allwinner,sun8i-r40-ehci + - allwinner,sun8i-v3s-ehci - allwinner,sun9i-a80-ehci + - allwinner,sun20i-d1-ehci - aspeed,ast2400-ehci - aspeed,ast2500-ehci - aspeed,ast2600-ehci @@ -55,14 +58,17 @@ properties: - brcm,bcm7420-ehci - brcm,bcm7425-ehci - brcm,bcm7435-ehci + - hpe,gxp-ehci - ibm,476gtr-ehci - nxp,lpc1850-ehci - qca,ar7100-ehci + - rockchip,rk3588-ehci - snps,hsdk-v1.0-ehci - socionext,uniphier-ehci - const: generic-ehci - items: - enum: + - atmel,at91sam9g45-ehci - cavium,octeon-6335-ehci - ibm,usb-ehci-440epx - ibm,usb-ehci-460ex @@ -71,6 +77,11 @@ properties: - const: usb-ehci - enum: - generic-ehci + - marvell,armada-3700-ehci + - marvell,orion-ehci + - nuvoton,npcm750-ehci + - nuvoton,npcm845-ehci + - ti,ehci-omap - usb-ehci reg: @@ -129,13 +140,9 @@ properties: Set this flag to indicate that the hardware sometimes turns on the OC bit when an over-current isn't actually present. - companion: - $ref: /schemas/types.yaml#/definitions/phandle - description: - Phandle of a companion. - phys: - maxItems: 1 + minItems: 1 + maxItems: 3 phy-names: const: usb @@ -153,7 +160,7 @@ required: - reg - interrupts -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/usb/generic-ohci.yaml b/dts/Bindings/usb/generic-ohci.yaml index acbf94fa5f..b957601573 100644 --- a/dts/Bindings/usb/generic-ohci.yaml +++ b/dts/Bindings/usb/generic-ohci.yaml @@ -4,10 +4,7 @@ $id: http://devicetree.org/schemas/usb/generic-ohci.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: USB OHCI Controller Device Tree Bindings - -allOf: - - $ref: "usb-hcd.yaml" +title: USB OHCI Controller maintainers: - Greg Kroah-Hartman <gregkh@linuxfoundation.org> @@ -20,6 +17,7 @@ properties: - allwinner,sun4i-a10-ohci - allwinner,sun50i-a64-ohci - allwinner,sun50i-h6-ohci + - allwinner,sun50i-h616-ohci - allwinner,sun5i-a13-ohci - allwinner,sun6i-a31-ohci - allwinner,sun7i-a20-ohci @@ -27,7 +25,9 @@ properties: - allwinner,sun8i-a83t-ohci - allwinner,sun8i-h3-ohci - allwinner,sun8i-r40-ohci + - allwinner,sun8i-v3s-ohci - allwinner,sun9i-a80-ohci + - allwinner,sun20i-d1-ohci - brcm,bcm3384-ohci - brcm,bcm63268-ohci - brcm,bcm6328-ohci @@ -42,11 +42,22 @@ properties: - brcm,bcm7420-ohci - brcm,bcm7425-ohci - brcm,bcm7435-ohci + - hpe,gxp-ohci - ibm,476gtr-ohci - ingenic,jz4740-ohci + - rockchip,rk3588-ohci - snps,hsdk-v1.0-ohci - const: generic-ohci - - const: generic-ohci + - enum: + - generic-ohci + - ti,ohci-omap3 + - items: + - enum: + - cavium,octeon-6335-ohci + - nintendo,hollywood-usb-ohci + - nxp,ohci-nxp + - st,spear600-ohci + - const: usb-ohci reg: maxItems: 1 @@ -60,7 +71,7 @@ properties: clocks: minItems: 1 - maxItems: 3 + maxItems: 4 description: | In case the Renesas R-Car Gen3 SoCs: - if a host only channel: first clock should be host. @@ -102,7 +113,8 @@ properties: Overrides the detected port count phys: - maxItems: 1 + minItems: 1 + maxItems: 3 phy-names: const: usb @@ -115,12 +127,44 @@ properties: - host - otg + transceiver: + $ref: /schemas/types.yaml#/definitions/phandle + description: + The associated ISP1301 device. Necessary for the UDC controller for + connecting to the USB physical layer. + required: - compatible - reg - interrupts -additionalProperties: false +allOf: + - $ref: usb-hcd.yaml + - if: + not: + properties: + compatible: + contains: + const: nxp,ohci-nxp + then: + properties: + transceiver: false + - if: + properties: + compatible: + contains: + const: rockchip,rk3588-ohci + then: + properties: + clocks: + minItems: 4 + else: + properties: + clocks: + minItems: 1 + maxItems: 3 + +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/usb/generic-xhci.yaml b/dts/Bindings/usb/generic-xhci.yaml index 23d73df96e..6ceafa4af2 100644 --- a/dts/Bindings/usb/generic-xhci.yaml +++ b/dts/Bindings/usb/generic-xhci.yaml @@ -4,14 +4,11 @@ $id: http://devicetree.org/schemas/usb/generic-xhci.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: USB xHCI Controller Device Tree Bindings +title: USB xHCI Controller maintainers: - Mathias Nyman <mathias.nyman@intel.com> -allOf: - - $ref: "usb-xhci.yaml#" - properties: compatible: oneOf: @@ -25,6 +22,11 @@ properties: - marvell,armada-380-xhci - marvell,armada-8k-xhci - const: generic-xhci + - description: Broadcom SoCs with power domains + items: + - enum: + - brcm,bcm2711-xhci + - const: brcm,xhci-brcm-v2 - description: Broadcom STB SoCs with xHCI enum: - brcm,xhci-brcm-v2 @@ -49,6 +51,9 @@ properties: - const: core - const: reg + power-domains: + maxItems: 1 + unevaluatedProperties: false required: @@ -56,6 +61,20 @@ required: - reg - interrupts +allOf: + - $ref: usb-xhci.yaml# + - if: + properties: + compatible: + contains: + const: brcm,bcm2711-xhci + then: + required: + - power-domains + else: + properties: + power-domains: false + examples: - | usb@f0931000 { diff --git a/dts/Bindings/usb/genesys,gl850g.yaml b/dts/Bindings/usb/genesys,gl850g.yaml new file mode 100644 index 0000000000..37cf5249e5 --- /dev/null +++ b/dts/Bindings/usb/genesys,gl850g.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/genesys,gl850g.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Genesys Logic USB hub controller + +maintainers: + - Icenowy Zheng <uwu@icenowy.me> + +allOf: + - $ref: usb-device.yaml# + +properties: + compatible: + enum: + - usb5e3,608 + - usb5e3,610 + - usb5e3,620 + - usb5e3,626 + + reg: true + + reset-gpios: + description: GPIO controlling the RESET# pin. + + vdd-supply: + description: + the regulator that provides 3.3V core power to the hub. + + peer-hub: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to the peer hub on the controller. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + usb { + dr_mode = "host"; + #address-cells = <1>; + #size-cells = <0>; + + hub: hub@1 { + compatible = "usb5e3,608"; + reg = <1>; + reset-gpios = <&pio 7 2 GPIO_ACTIVE_LOW>; + }; + }; diff --git a/dts/Bindings/usb/gpio-sbu-mux.yaml b/dts/Bindings/usb/gpio-sbu-mux.yaml new file mode 100644 index 0000000000..d3b2b666ec --- /dev/null +++ b/dts/Bindings/usb/gpio-sbu-mux.yaml @@ -0,0 +1,110 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/gpio-sbu-mux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GPIO-based SBU mux + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + +description: + In USB Type-C applications the SBU lines needs to be connected, disconnected + and swapped depending on the altmode and orientation. This binding describes + a family of hardware solutions which switches between these modes using GPIO + signals. + +properties: + compatible: + items: + - enum: + - nxp,cbdtu02043 + - onnn,fsusb43l10x + - pericom,pi3usb102 + - const: gpio-sbu-mux + + enable-gpios: + description: Switch enable GPIO + + select-gpios: + description: Orientation select + + vcc-supply: + description: power supply + + mode-switch: + description: Flag the port as possible handle of altmode switching + type: boolean + + orientation-switch: + description: Flag the port as possible handler of orientation switching + type: boolean + + port: + $ref: /schemas/graph.yaml#/properties/port + description: + A port node to link the SBU mux to a TypeC controller for the purpose of + handling altmode muxing and orientation switching. + +required: + - compatible + - enable-gpios + - select-gpios + - orientation-switch + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + tcpm { + connector { + compatible = "usb-c-connector"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + tcpm_hs_out: endpoint { + remote-endpoint = <&usb_hs_phy_in>; + }; + }; + + port@1 { + reg = <1>; + tcpm_ss_out: endpoint { + remote-endpoint = <&usb_ss_phy_in>; + }; + }; + + port@2 { + reg = <2>; + tcpm_sbu_out: endpoint { + remote-endpoint = <&sbu_mux_in>; + }; + }; + }; + }; + }; + + sbu-mux { + compatible = "pericom,pi3usb102", "gpio-sbu-mux"; + + enable-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>; + select-gpios = <&tlmm 164 GPIO_ACTIVE_HIGH>; + + mode-switch; + orientation-switch; + + port { + sbu_mux_in: endpoint { + remote-endpoint = <&tcpm_sbu_out>; + }; + }; + }; +... diff --git a/dts/Bindings/usb/ingenic,musb.yaml b/dts/Bindings/usb/ingenic,musb.yaml index 59212358fc..4cc1496a91 100644 --- a/dts/Bindings/usb/ingenic,musb.yaml +++ b/dts/Bindings/usb/ingenic,musb.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/usb/ingenic,musb.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Ingenic JZ47xx USB IP DT bindings +title: Ingenic JZ47xx USB IP maintainers: - Paul Cercueil <paul@crapouillou.net> diff --git a/dts/Bindings/usb/intel,keembay-dwc3.yaml b/dts/Bindings/usb/intel,keembay-dwc3.yaml index 43b91ab620..d3511f48cd 100644 --- a/dts/Bindings/usb/intel,keembay-dwc3.yaml +++ b/dts/Bindings/usb/intel,keembay-dwc3.yaml @@ -13,6 +13,9 @@ properties: compatible: const: intel,keembay-dwc3 + reg: + maxItems: 1 + clocks: maxItems: 4 diff --git a/dts/Bindings/usb/marvell,pxau2o-ehci.yaml b/dts/Bindings/usb/marvell,pxau2o-ehci.yaml index 3cf93dd45e..a0246aa1f2 100644 --- a/dts/Bindings/usb/marvell,pxau2o-ehci.yaml +++ b/dts/Bindings/usb/marvell,pxau2o-ehci.yaml @@ -5,7 +5,7 @@ $id: http://devicetree.org/schemas/usb/marvell,pxau2o-ehci.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Marvell PXA/MMP EHCI bindings +title: Marvell PXA/MMP EHCI maintainers: - Lubomir Rintel <lkundrak@v3.sk> diff --git a/dts/Bindings/usb/maxim,max33359.yaml b/dts/Bindings/usb/maxim,max33359.yaml index 93a19eda61..276bf75542 100644 --- a/dts/Bindings/usb/maxim,max33359.yaml +++ b/dts/Bindings/usb/maxim,max33359.yaml @@ -1,10 +1,10 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/usb/maxim,max33359.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/usb/maxim,max33359.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# -title: Maxim TCPCI Type-C PD controller DT bindings +title: Maxim TCPCI Type-C PD controller maintainers: - Badhri Jagan Sridharan <badhri@google.com> @@ -40,7 +40,7 @@ examples: - | #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/usb/pd.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/dts/Bindings/usb/maxim,max3420-udc.yaml b/dts/Bindings/usb/maxim,max3420-udc.yaml index 1d893d3d34..8e0f4ecc01 100644 --- a/dts/Bindings/usb/maxim,max3420-udc.yaml +++ b/dts/Bindings/usb/maxim,max3420-udc.yaml @@ -52,7 +52,7 @@ examples: - | #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> - spi0 { + spi { #address-cells = <1>; #size-cells = <0>; diff --git a/dts/Bindings/usb/mediatek,mt6360-tcpc.yaml b/dts/Bindings/usb/mediatek,mt6360-tcpc.yaml index 1e8e1c2218..053264e605 100644 --- a/dts/Bindings/usb/mediatek,mt6360-tcpc.yaml +++ b/dts/Bindings/usb/mediatek,mt6360-tcpc.yaml @@ -1,10 +1,10 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/usb/mediatek,mt6360-tcpc.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/usb/mediatek,mt6360-tcpc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# -title: Mediatek MT6360 Type-C Port Switch and Power Delivery controller DT bindings +title: Mediatek MT6360 Type-C Port Switch and Power Delivery controller maintainers: - ChiYuan Huang <cy_huang@richtek.com> @@ -43,13 +43,18 @@ examples: - | #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/usb/pd.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; mt6360@34 { compatible = "mediatek,mt6360"; reg = <0x34>; + interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "IRQB"; + interrupt-controller; + #interrupt-cells = <1>; + tcpc { compatible = "mediatek,mt6360-tcpc"; interrupts-extended = <&gpio26 3 IRQ_TYPE_LEVEL_LOW>; diff --git a/dts/Bindings/usb/mediatek,mt6370-tcpc.yaml b/dts/Bindings/usb/mediatek,mt6370-tcpc.yaml new file mode 100644 index 0000000000..747d0f16d9 --- /dev/null +++ b/dts/Bindings/usb/mediatek,mt6370-tcpc.yaml @@ -0,0 +1,36 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/mediatek,mt6370-tcpc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediatTek MT6370 Type-C Port Switch and Power Delivery controller + +maintainers: + - ChiYuan Huang <cy_huang@richtek.com> + +description: | + MediaTek MT6370 is a multi-functional device. + It integrates charger, ADC, flash, RGB indicators, + regulators (DSV/VIBLDO), and TypeC Port Switch with Power Delivery controller. + This document only describes MT6370 Type-C Port Switch and + Power Delivery controller. + +properties: + compatible: + enum: + - mediatek,mt6370-tcpc + + interrupts: + maxItems: 1 + + connector: + type: object + $ref: /schemas/connector/usb-connector.yaml# + unevaluatedProperties: false + +additionalProperties: false + +required: + - compatible + - interrupts diff --git a/dts/Bindings/usb/mediatek,mtk-xhci.yaml b/dts/Bindings/usb/mediatek,mtk-xhci.yaml index 11f7bacd4e..924fd3d748 100644 --- a/dts/Bindings/usb/mediatek,mtk-xhci.yaml +++ b/dts/Bindings/usb/mediatek,mtk-xhci.yaml @@ -5,13 +5,13 @@ $id: http://devicetree.org/schemas/usb/mediatek,mtk-xhci.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: MediaTek USB3 xHCI Device Tree Bindings +title: MediaTek USB3 xHCI maintainers: - Chunfeng Yun <chunfeng.yun@mediatek.com> allOf: - - $ref: "usb-xhci.yaml" + - $ref: usb-xhci.yaml description: | There are two scenarios: @@ -28,10 +28,14 @@ properties: - mediatek,mt7622-xhci - mediatek,mt7623-xhci - mediatek,mt7629-xhci + - mediatek,mt7986-xhci - mediatek,mt8173-xhci - mediatek,mt8183-xhci + - mediatek,mt8186-xhci + - mediatek,mt8188-xhci - mediatek,mt8192-xhci - mediatek,mt8195-xhci + - mediatek,mt8365-xhci - const: mediatek,mtk-xhci reg: @@ -56,6 +60,7 @@ properties: - description: optional, wakeup interrupt used to support runtime PM interrupt-names: + minItems: 1 items: - const: host - const: wakeup @@ -72,6 +77,7 @@ properties: - description: Mcu bus clock for register access - description: DMA bus clock for data transfer - description: controller clock + - description: frame count clock clock-names: minItems: 1 @@ -81,14 +87,7 @@ properties: - const: mcu_ck - const: dma_ck - const: xhci_ck - - assigned-clocks: - minItems: 1 - maxItems: 5 - - assigned-clock-parents: - minItems: 1 - maxItems: 5 + - const: frmcnt_ck phys: description: @@ -112,6 +111,9 @@ properties: vbus-supply: description: Regulator of USB VBUS5v + resets: + maxItems: 1 + usb3-lpm-capable: true usb2-lpm-disable: true @@ -122,6 +124,17 @@ properties: defined in the xHCI spec on MTK's controller. default: 5000 + rx-fifo-depth: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + It is a quirk used to work around Gen1 isoc-in endpoint transfer issue + that still send out unexpected ACK after device finishes the burst + transfer with a short packet and cause an exception, specially on a 4K + camera device, it happens on controller before about IPM v1.6.0; + the side-effect is that it may cause performance drop about 10%, + including bulk transfer, prefer to use 3k here. The size is in bytes. + enum: [1024, 2048, 3072, 4096] + # the following properties are only used for case 1 wakeup-source: description: enable USB remote wakeup, see power/wakeup-source.txt @@ -146,7 +159,11 @@ properties: 2 - used by mt2712 etc, revision 2 following IPM rule; 101 - used by mt8183, specific 1.01; 102 - used by mt8192, specific 1.02; - enum: [1, 2, 101, 102] + 103 - used by mt8195, IP0, specific 1.03; + 104 - used by mt8195, IP1, specific 1.04; + 105 - used by mt8195, IP2, specific 1.05; + 106 - used by mt8195, IP3, specific 1.06; + enum: [1, 2, 101, 102, 103, 104, 105, 106] mediatek,u3p-dis-msk: $ref: /schemas/types.yaml#/definitions/uint32 diff --git a/dts/Bindings/usb/mediatek,mtu3.yaml b/dts/Bindings/usb/mediatek,mtu3.yaml index 77db123351..a59d91243a 100644 --- a/dts/Bindings/usb/mediatek,mtu3.yaml +++ b/dts/Bindings/usb/mediatek,mtu3.yaml @@ -5,13 +5,13 @@ $id: http://devicetree.org/schemas/usb/mediatek,mtu3.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: MediaTek USB3 DRD Controller Device Tree Bindings +title: MediaTek USB3 DRD Controller maintainers: - Chunfeng Yun <chunfeng.yun@mediatek.com> allOf: - - $ref: "usb-drd.yaml" + - $ref: usb-drd.yaml description: | The DRD controller has a glue layer IPPC (IP Port Control), and its host is @@ -24,7 +24,11 @@ properties: - mediatek,mt2712-mtu3 - mediatek,mt8173-mtu3 - mediatek,mt8183-mtu3 + - mediatek,mt8186-mtu3 + - mediatek,mt8188-mtu3 - mediatek,mt8192-mtu3 + - mediatek,mt8195-mtu3 + - mediatek,mt8365-mtu3 - const: mediatek,mtu3 reg: @@ -62,6 +66,8 @@ properties: - description: Reference clock used by low power mode etc - description: Mcu bus clock for register access - description: DMA bus clock for data transfer + - description: DRD controller clock + - description: Frame count clock clock-names: minItems: 1 @@ -70,6 +76,8 @@ properties: - const: ref_ck - const: mcu_ck - const: dma_ck + - const: xhci_ck + - const: frmcnt_ck phys: description: @@ -106,6 +114,9 @@ properties: maximum-speed: enum: [super-speed-plus, super-speed, high-speed, full-speed] + resets: + maxItems: 1 + "#address-cells": enum: [1, 2] @@ -132,7 +143,7 @@ properties: default: host connector: - $ref: /connector/usb-connector.yaml# + $ref: /schemas/connector/usb-connector.yaml# description: Connector for dual role switch, especially for "gpio-usb-b-connector" type: object @@ -191,15 +202,15 @@ properties: patternProperties: "^usb@[0-9a-f]+$": type: object - $ref: /usb/mediatek,mtk-xhci.yaml# + $ref: /schemas/usb/mediatek,mtk-xhci.yaml# description: The xhci should be added as subnode to mtu3 as shown in the following example if the host mode is enabled. dependencies: - connector: [ 'usb-role-switch' ] - port: [ 'usb-role-switch' ] - role-switch-default-mode: [ 'usb-role-switch' ] + connector: [ usb-role-switch ] + port: [ usb-role-switch ] + role-switch-default-mode: [ usb-role-switch ] wakeup-source: [ 'mediatek,syscon-wakeup' ] required: @@ -293,7 +304,7 @@ examples: # Dual role switch with type-c - | usb@11201000 { - compatible ="mediatek,mt8183-mtu3", "mediatek,mtu3"; + compatible = "mediatek,mt8183-mtu3", "mediatek,mtu3"; reg = <0x11201000 0x2e00>, <0x11203e00 0x0100>; reg-names = "mac", "ippc"; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>; diff --git a/dts/Bindings/usb/mediatek,musb.yaml b/dts/Bindings/usb/mediatek,musb.yaml index 03d62d60ce..a39d38db77 100644 --- a/dts/Bindings/usb/mediatek,musb.yaml +++ b/dts/Bindings/usb/mediatek,musb.yaml @@ -5,7 +5,7 @@ $id: http://devicetree.org/schemas/usb/mediatek,musb.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: MediaTek MUSB DRD/OTG Controller Device Tree Bindings +title: MediaTek MUSB DRD/OTG Controller maintainers: - Min Guo <min.guo@mediatek.com> @@ -63,13 +63,13 @@ properties: maxItems: 1 connector: - $ref: /connector/usb-connector.yaml# + $ref: /schemas/connector/usb-connector.yaml# description: Connector for dual role switch type: object dependencies: - usb-role-switch: [ 'connector' ] - connector: [ 'usb-role-switch' ] + usb-role-switch: [ connector ] + connector: [ usb-role-switch ] required: - compatible diff --git a/dts/Bindings/usb/microchip,mpfs-musb.yaml b/dts/Bindings/usb/microchip,mpfs-musb.yaml new file mode 100644 index 0000000000..c5e9ce2e7b --- /dev/null +++ b/dts/Bindings/usb/microchip,mpfs-musb.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/microchip,mpfs-musb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip MPFS USB Controller + +allOf: + - $ref: usb-drd.yaml# + +maintainers: + - Conor Dooley <conor.dooley@microchip.com> + +properties: + compatible: + enum: + - microchip,mpfs-musb + + dr_mode: true + + reg: + maxItems: 1 + + interrupts: + minItems: 2 + maxItems: 2 + + interrupt-names: + items: + - const: dma + - const: mc + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + +additionalProperties: false + +examples: + - | + #include "dt-bindings/clock/microchip,mpfs-clock.h" + usb@20201000 { + compatible = "microchip,mpfs-musb"; + reg = <0x20201000 0x1000>; + clocks = <&clkcfg CLK_USB>; + interrupt-parent = <&plic>; + interrupts = <86>, <87>; + interrupt-names = "dma", "mc"; + dr_mode = "host"; + }; + +... diff --git a/dts/Bindings/usb/microchip,usb5744.yaml b/dts/Bindings/usb/microchip,usb5744.yaml new file mode 100644 index 0000000000..445183d9d6 --- /dev/null +++ b/dts/Bindings/usb/microchip,usb5744.yaml @@ -0,0 +1,113 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/microchip,usb5744.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip USB5744 4-port Hub Controller + +description: + Microchip's USB5744 SmartHubTM IC is a 4 port, SuperSpeed (SS)/Hi-Speed (HS), + low power, low pin count configurable and fully compliant with the USB 3.1 + Gen 1 specification. The USB5744 also supports Full Speed (FS) and Low Speed + (LS) USB signaling, offering complete coverage of all defined USB operating + speeds. The new SuperSpeed hubs operate in parallel with the USB 2.0 + controller, so 5 Gbps SuperSpeed data transfers are not affected by slower + USB 2.0 traffic. + +maintainers: + - Michal Simek <michal.simek@amd.com> + - Mubin Sayyed <mubin.sayyed@amd.com> + - Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> + +properties: + compatible: + enum: + - usb424,2744 + - usb424,5744 + - microchip,usb5744 + + reg: + maxItems: 1 + + reset-gpios: + maxItems: 1 + description: + GPIO controlling the GRST# pin. + + vdd-supply: + description: + 3V3 power supply to the hub + + vdd2-supply: + description: + 1V2 power supply to the hub + + peer-hub: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to the peer hub on the controller. + + i2c-bus: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle of an usb hub connected via i2c bus. + +required: + - compatible + - reg + +allOf: + - if: + properties: + compatible: + contains: + const: microchip,usb5744 + then: + properties: + reset-gpios: false + vdd-supply: false + vdd2-supply: false + peer-hub: false + i2c-bus: false + else: + $ref: /schemas/usb/usb-device.yaml + required: + - peer-hub + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c: i2c { + #address-cells = <1>; + #size-cells = <0>; + hub: usb-hub@2d { + compatible = "microchip,usb5744"; + reg = <0x2d>; + }; + }; + + usb { + #address-cells = <1>; + #size-cells = <0>; + + /* 2.0 hub on port 1 */ + hub_2_0: hub@1 { + compatible = "usb424,2744"; + reg = <1>; + peer-hub = <&hub_3_0>; + i2c-bus = <&hub>; + reset-gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + }; + + /* 3.0 hub on port 2 */ + hub_3_0: hub@2 { + compatible = "usb424,5744"; + reg = <2>; + peer-hub = <&hub_2_0>; + i2c-bus = <&hub>; + reset-gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + }; + }; diff --git a/dts/Bindings/usb/msm-hsusb.txt b/dts/Bindings/usb/msm-hsusb.txt index 8654a3ec23..afc30e98b1 100644 --- a/dts/Bindings/usb/msm-hsusb.txt +++ b/dts/Bindings/usb/msm-hsusb.txt @@ -53,7 +53,7 @@ Optional properties: - dr_mode: One of "host", "peripheral" or "otg". Defaults to "otg" - switch-gpio: A phandle + gpio-specifier pair. Some boards are using Dual - SPDT USB Switch, witch is cotrolled by GPIO to de/multiplex + SPDT USB Switch, witch is controlled by GPIO to de/multiplex D+/D- USB lines between connectors. - qcom,phy-init-sequence: PHY configuration sequence values. This is related to Device diff --git a/dts/Bindings/usb/npcm7xx-usb.txt b/dts/Bindings/usb/npcm7xx-usb.txt deleted file mode 100644 index 5a0f1f14fb..0000000000 --- a/dts/Bindings/usb/npcm7xx-usb.txt +++ /dev/null @@ -1,18 +0,0 @@ -Nuvoton NPCM7XX SoC USB controllers: ------------------------------ - -EHCI: ------ - -Required properties: -- compatible: "nuvoton,npcm750-ehci" -- interrupts: Should contain the EHCI interrupt -- reg: Physical address and length of the register set for the device - -Example: - - ehci1: usb@f0806000 { - compatible = "nuvoton,npcm750-ehci"; - reg = <0xf0806000 0x1000>; - interrupts = <0 61 4>; - }; diff --git a/dts/Bindings/usb/nvidia,tegra-xudc.yaml b/dts/Bindings/usb/nvidia,tegra-xudc.yaml index 8428415896..c6e661e891 100644 --- a/dts/Bindings/usb/nvidia,tegra-xudc.yaml +++ b/dts/Bindings/usb/nvidia,tegra-xudc.yaml @@ -1,10 +1,10 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/usb/nvidia,tegra-xudc.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/usb/nvidia,tegra-xudc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# -title: Device tree binding for NVIDIA Tegra XUSB device mode controller (XUDC) +title: NVIDIA Tegra XUSB device mode controller (XUDC) description: The Tegra XUDC controller supports both USB 2.0 HighSpeed/FullSpeed and @@ -22,6 +22,7 @@ properties: - nvidia,tegra210-xudc # For Tegra210 - nvidia,tegra186-xudc # For Tegra186 - nvidia,tegra194-xudc # For Tegra194 + - nvidia,tegra234-xudc # For Tegra234 reg: minItems: 2 @@ -59,6 +60,19 @@ properties: - const: fs_src - const: hs_src + interconnects: + items: + - description: memory read client + - description: memory write client + + interconnect-names: + items: + - const: dma-mem # read + - const: write + + iommus: + maxItems: 1 + power-domains: items: - description: XUSBB(device) power-domain @@ -70,13 +84,14 @@ properties: - const: ss nvidia,xusb-padctl: - $ref: /schemas/types.yaml#/definitions/phandle-array + $ref: /schemas/types.yaml#/definitions/phandle description: phandle to the XUSB pad controller that is used to configure the USB pads used by the XUDC controller. phys: minItems: 1 + maxItems: 2 description: Must contain an entry for each entry in phy-names. See ../phy/phy-bindings.txt for details. @@ -85,13 +100,7 @@ properties: minItems: 1 items: - const: usb2-0 - - const: usb2-1 - - const: usb2-2 - - const: usb2-3 - const: usb3-0 - - const: usb3-1 - - const: usb3-2 - - const: usb3-3 avddio-usb-supply: description: PCIe/USB3 analog logic power supply. Must supply 1.05 V. @@ -99,6 +108,8 @@ properties: hvdd-usb-supply: description: USB controller power supply. Must supply 3.3 V. + dma-coherent: true + required: - compatible - reg @@ -140,6 +151,7 @@ allOf: enum: - nvidia,tegra186-xudc - nvidia,tegra194-xudc + - nvidia,tegra234-xudc then: properties: reg: @@ -151,6 +163,17 @@ allOf: clock-names: maxItems: 4 + - if: + properties: + compatible: + contains: + enum: + - nvidia,tegra194-xudc + - nvidia,tegra234-xudc + then: + required: + - dma-coherent + additionalProperties: false examples: diff --git a/dts/Bindings/usb/nvidia,tegra124-xusb.txt b/dts/Bindings/usb/nvidia,tegra124-xusb.txt deleted file mode 100644 index 5bfcc0b4d6..0000000000 --- a/dts/Bindings/usb/nvidia,tegra124-xusb.txt +++ /dev/null @@ -1,132 +0,0 @@ -NVIDIA Tegra xHCI controller -============================ - -The Tegra xHCI controller supports both USB2 and USB3 interfaces exposed by -the Tegra XUSB pad controller. - -Required properties: --------------------- -- compatible: Must be: - - Tegra124: "nvidia,tegra124-xusb" - - Tegra132: "nvidia,tegra132-xusb", "nvidia,tegra124-xusb" - - Tegra210: "nvidia,tegra210-xusb" - - Tegra186: "nvidia,tegra186-xusb" -- reg: Must contain the base and length of the xHCI host registers, XUSB FPCI - registers and XUSB IPFS registers. -- reg-names: Must contain the following entries: - - "hcd" - - "fpci" - - "ipfs" -- interrupts: Must contain the xHCI host interrupt and the mailbox interrupt. -- clocks: Must contain an entry for each entry in clock-names. - See ../clock/clock-bindings.txt for details. -- clock-names: Must include the following entries: - - xusb_host - - xusb_host_src - - xusb_falcon_src - - xusb_ss - - xusb_ss_src - - xusb_ss_div2 - - xusb_hs_src - - xusb_fs_src - - pll_u_480m - - clk_m - - pll_e -- resets: Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names: Must include the following entries: - - xusb_host - - xusb_ss - - xusb_src - Note that xusb_src is the shared reset for xusb_{ss,hs,fs,falcon,host}_src. -- nvidia,xusb-padctl: phandle to the XUSB pad controller that is used to - configure the USB pads used by the XHCI controller - -For Tegra124 and Tegra132: -- avddio-pex-supply: PCIe/USB3 analog logic power supply. Must supply 1.05 V. -- dvddio-pex-supply: PCIe/USB3 digital logic power supply. Must supply 1.05 V. -- avdd-usb-supply: USB controller power supply. Must supply 3.3 V. -- avdd-pll-utmip-supply: UTMI PLL power supply. Must supply 1.8 V. -- avdd-pll-erefe-supply: PLLE reference PLL power supply. Must supply 1.05 V. -- avdd-usb-ss-pll-supply: PCIe/USB3 PLL power supply. Must supply 1.05 V. -- hvdd-usb-ss-supply: High-voltage PCIe/USB3 power supply. Must supply 3.3 V. -- hvdd-usb-ss-pll-e-supply: High-voltage PLLE power supply. Must supply 3.3 V. - -For Tegra210: -- dvddio-pex-supply: PCIe/USB3 analog logic power supply. Must supply 1.05 V. -- hvddio-pex-supply: High-voltage PCIe/USB3 power supply. Must supply 1.8 V. -- avdd-usb-supply: USB controller power supply. Must supply 3.3 V. -- avdd-pll-utmip-supply: UTMI PLL power supply. Must supply 1.8 V. -- avdd-pll-uerefe-supply: PLLE reference PLL power supply. Must supply 1.05 V. -- dvdd-pex-pll-supply: PCIe/USB3 PLL power supply. Must supply 1.05 V. -- hvdd-pex-pll-e-supply: High-voltage PLLE power supply. Must supply 1.8 V. - -For Tegra210 and Tegra186: -- power-domains: A list of PM domain specifiers that reference each power-domain - used by the xHCI controller. This list must comprise of a specifier for the - XUSBA and XUSBC power-domains. See ../power/power_domain.txt and - ../arm/tegra/nvidia,tegra20-pmc.txt for details. -- power-domain-names: A list of names that represent each of the specifiers in - the 'power-domains' property. Must include 'xusb_ss' and 'xusb_host' which - represent the power-domains XUSBA and XUSBC, respectively. See - ../power/power_domain.txt for details. - -Optional properties: --------------------- -- phys: Must contain an entry for each entry in phy-names. - See ../phy/phy-bindings.txt for details. -- phy-names: Should include an entry for each PHY used by the controller. The - following PHYs are available: - - Tegra124: usb2-0, usb2-1, usb2-2, hsic-0, hsic-1, usb3-0, usb3-1 - - Tegra132: usb2-0, usb2-1, usb2-2, hsic-0, hsic-1, usb3-0, usb3-1 - - Tegra210: usb2-0, usb2-1, usb2-2, usb2-3, hsic-0, usb3-0, usb3-1, usb3-2, - usb3-3 - - Tegra186: usb2-0, usb2-1, usb2-2, hsic-0, usb3-0, usb3-1, usb3-2 - -Example: --------- - - usb@0,70090000 { - compatible = "nvidia,tegra124-xusb"; - reg = <0x0 0x70090000 0x0 0x8000>, - <0x0 0x70098000 0x0 0x1000>, - <0x0 0x70099000 0x0 0x1000>; - reg-names = "hcd", "fpci", "ipfs"; - - interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; - - clocks = <&tegra_car TEGRA124_CLK_XUSB_HOST>, - <&tegra_car TEGRA124_CLK_XUSB_HOST_SRC>, - <&tegra_car TEGRA124_CLK_XUSB_FALCON_SRC>, - <&tegra_car TEGRA124_CLK_XUSB_SS>, - <&tegra_car TEGRA124_CLK_XUSB_SS_DIV2>, - <&tegra_car TEGRA124_CLK_XUSB_SS_SRC>, - <&tegra_car TEGRA124_CLK_XUSB_HS_SRC>, - <&tegra_car TEGRA124_CLK_XUSB_FS_SRC>, - <&tegra_car TEGRA124_CLK_PLL_U_480M>, - <&tegra_car TEGRA124_CLK_CLK_M>, - <&tegra_car TEGRA124_CLK_PLL_E>; - clock-names = "xusb_host", "xusb_host_src", "xusb_falcon_src", - "xusb_ss", "xusb_ss_div2", "xusb_ss_src", - "xusb_hs_src", "xusb_fs_src", "pll_u_480m", - "clk_m", "pll_e"; - resets = <&tegra_car 89>, <&tegra_car 156>, <&tegra_car 143>; - reset-names = "xusb_host", "xusb_ss", "xusb_src"; - - nvidia,xusb-padctl = <&padctl>; - - phys = <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-1}>, /* mini-PCIe USB */ - <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-2}>, /* USB A */ - <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-0}>; /* USB A */ - phy-names = "usb2-1", "usb2-2", "usb3-0"; - - avddio-pex-supply = <&vdd_1v05_run>; - dvddio-pex-supply = <&vdd_1v05_run>; - avdd-usb-supply = <&vdd_3v3_lp0>; - avdd-pll-utmip-supply = <&vddio_1v8>; - avdd-pll-erefe-supply = <&avdd_1v05_run>; - avdd-usb-ss-pll-supply = <&vdd_1v05_run>; - hvdd-usb-ss-supply = <&vdd_3v3_lp0>; - hvdd-usb-ss-pll-e-supply = <&vdd_3v3_lp0>; - }; diff --git a/dts/Bindings/usb/nvidia,tegra124-xusb.yaml b/dts/Bindings/usb/nvidia,tegra124-xusb.yaml new file mode 100644 index 0000000000..d6ca8c9307 --- /dev/null +++ b/dts/Bindings/usb/nvidia,tegra124-xusb.yaml @@ -0,0 +1,200 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/nvidia,tegra124-xusb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra124 xHCI controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +description: The Tegra xHCI controller supports both USB2 and USB3 interfaces + exposed by the Tegra XUSB pad controller. + +properties: + # required + compatible: + oneOf: + - description: NVIDIA Tegra124 + const: nvidia,tegra124-xusb + + - description: NVIDIA Tegra132 + items: + - const: nvidia,tegra132-xusb + - const: nvidia,tegra124-xusb + + reg: + items: + - description: base and length of the xHCI host registers + - description: base and length of the XUSB FPCI registers + - description: base and length of the XUSB IPFS registers + + reg-names: + items: + - const: hcd + - const: fpci + - const: ipfs + + interrupts: + items: + - description: xHCI host interrupt + - description: mailbox interrupt + + clocks: + items: + - description: XUSB host clock + - description: XUSB host source clock + - description: XUSB Falcon source clock + - description: XUSB SuperSpeed clock + - description: XUSB SuperSpeed clock divider + - description: XUSB SuperSpeed source clock + - description: XUSB HighSpeed clock source + - description: XUSB FullSpeed clock source + - description: USB PLL + - description: reference clock + - description: I/O PLL + + clock-names: + items: + - const: xusb_host + - const: xusb_host_src + - const: xusb_falcon_src + - const: xusb_ss + - const: xusb_ss_div2 + - const: xusb_ss_src + - const: xusb_hs_src + - const: xusb_fs_src + - const: pll_u_480m + - const: clk_m + - const: pll_e + + resets: + items: + - description: reset for the XUSB host controller + - description: reset for the SuperSpeed logic + - description: shared reset for xusb_{ss,hs,fs,falcon,host}_src. + + reset-names: + items: + - const: xusb_host + - const: xusb_ss + - const: xusb_src + + nvidia,xusb-padctl: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to the XUSB pad controller that is used to configure + the USB pads used by the XHCI controller + + # optional + phys: + minItems: 1 + maxItems: 7 + + phy-names: + minItems: 1 + maxItems: 7 + items: + enum: + - usb2-0 + - usb2-1 + - usb2-2 + - hsic-0 + - hsic-1 + - usb3-0 + - usb3-1 + + avddio-pex-supply: + description: PCIe/USB3 analog logic power supply. Must supply 1.05 V. + + dvddio-pex-supply: + description: PCIe/USB3 digital logic power supply. Must supply 1.05 V. + + avdd-usb-supply: + description: USB controller power supply. Must supply 3.3 V. + + avdd-pll-utmip-supply: + description: UTMI PLL power supply. Must supply 1.8 V. + + avdd-pll-erefe-supply: + description: PLLE reference PLL power supply. Must supply 1.05 V. + + avdd-usb-ss-pll-supply: + description: PCIe/USB3 PLL power supply. Must supply 1.05 V. + + hvdd-usb-ss-supply: + description: High-voltage PCIe/USB3 power supply. Must supply 3.3 V. + + hvdd-usb-ss-pll-e-supply: + description: High-voltage PLLE power supply. Must supply 3.3 V. + +allOf: + - $ref: usb-xhci.yaml + +unevaluatedProperties: false + +required: + - compatible + - reg + - reg-names + - interrupts + - clocks + - clock-names + - resets + - reset-names + - nvidia,xusb-padctl + - phys + - phy-names + - avddio-pex-supply + - dvddio-pex-supply + - avdd-usb-supply + - hvdd-usb-ss-supply + +examples: + - | + #include <dt-bindings/clock/tegra124-car.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + usb@70090000 { + compatible = "nvidia,tegra124-xusb"; + reg = <0x70090000 0x8000>, + <0x70098000 0x1000>, + <0x70099000 0x1000>; + reg-names = "hcd", "fpci", "ipfs"; + + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&tegra_car TEGRA124_CLK_XUSB_HOST>, + <&tegra_car TEGRA124_CLK_XUSB_HOST_SRC>, + <&tegra_car TEGRA124_CLK_XUSB_FALCON_SRC>, + <&tegra_car TEGRA124_CLK_XUSB_SS>, + <&tegra_car TEGRA124_CLK_XUSB_SS_DIV2>, + <&tegra_car TEGRA124_CLK_XUSB_SS_SRC>, + <&tegra_car TEGRA124_CLK_XUSB_HS_SRC>, + <&tegra_car TEGRA124_CLK_XUSB_FS_SRC>, + <&tegra_car TEGRA124_CLK_PLL_U_480M>, + <&tegra_car TEGRA124_CLK_CLK_M>, + <&tegra_car TEGRA124_CLK_PLL_E>; + clock-names = "xusb_host", "xusb_host_src", "xusb_falcon_src", + "xusb_ss", "xusb_ss_div2", "xusb_ss_src", + "xusb_hs_src", "xusb_fs_src", "pll_u_480m", + "clk_m", "pll_e"; + resets = <&tegra_car 89>, <&tegra_car 156>, <&tegra_car 143>; + reset-names = "xusb_host", "xusb_ss", "xusb_src"; + + nvidia,xusb-padctl = <&padctl>; + + phys = <&phy_usb2_1>, <&phy_usb2_2>, <&phy_pcie_0>; + phy-names = "usb2-1", "usb2-2", "usb3-0"; + + avddio-pex-supply = <&vdd_1v05_run>; + dvddio-pex-supply = <&vdd_1v05_run>; + avdd-usb-supply = <&vdd_3v3_lp0>; + avdd-pll-utmip-supply = <&vddio_1v8>; + avdd-pll-erefe-supply = <&avdd_1v05_run>; + avdd-usb-ss-pll-supply = <&vdd_1v05_run>; + hvdd-usb-ss-supply = <&vdd_3v3_lp0>; + hvdd-usb-ss-pll-e-supply = <&vdd_3v3_lp0>; + }; diff --git a/dts/Bindings/usb/nvidia,tegra186-xusb.yaml b/dts/Bindings/usb/nvidia,tegra186-xusb.yaml new file mode 100644 index 0000000000..a04c6ce1e0 --- /dev/null +++ b/dts/Bindings/usb/nvidia,tegra186-xusb.yaml @@ -0,0 +1,171 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/nvidia,tegra186-xusb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra186 xHCI controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +description: The Tegra xHCI controller supports both USB2 and USB3 interfaces + exposed by the Tegra XUSB pad controller. + +properties: + compatible: + const: nvidia,tegra186-xusb + + reg: + items: + - description: base and length of the xHCI host registers + - description: base and length of the XUSB FPCI registers + + reg-names: + items: + - const: hcd + - const: fpci + + interrupts: + items: + - description: xHCI host interrupt + - description: mailbox interrupt + + clocks: + items: + - description: XUSB host clock + - description: XUSB Falcon source clock + - description: XUSB SuperSpeed clock + - description: XUSB SuperSpeed source clock + - description: XUSB HighSpeed clock source + - description: XUSB FullSpeed clock source + - description: USB PLL + - description: reference clock + - description: I/O PLL + + clock-names: + items: + - const: xusb_host + - const: xusb_falcon_src + - const: xusb_ss + - const: xusb_ss_src + - const: xusb_hs_src + - const: xusb_fs_src + - const: pll_u_480m + - const: clk_m + - const: pll_e + + interconnects: + items: + - description: read client + - description: write client + + interconnect-names: + items: + - const: dma-mem # read + - const: write + + iommus: + maxItems: 1 + + nvidia,xusb-padctl: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to the XUSB pad controller that is used to configure + the USB pads used by the XHCI controller + + phys: + minItems: 1 + maxItems: 7 + + phy-names: + minItems: 1 + maxItems: 7 + items: + enum: + - usb2-0 + - usb2-1 + - usb2-2 + - hsic-0 + - usb3-0 + - usb3-1 + - usb3-2 + + power-domains: + items: + - description: XUSBC power domain (for Host and USB 2.0) + - description: XUSBA power domain (for SuperSpeed) + + power-domain-names: + items: + - const: xusb_host + - const: xusb_ss + + dvddio-pex-supply: + description: PCIe/USB3 analog logic power supply. Must supply 1.05 V. + + hvddio-pex-supply: + description: High-voltage PCIe/USB3 power supply. Must supply 1.8 V. + + avdd-usb-supply: + description: USB controller power supply. Must supply 3.3 V. + + avdd-pll-utmip-supply: + description: UTMI PLL power supply. Must supply 1.8 V. + + avdd-pll-uerefe-supply: + description: PLLE reference PLL power supply. Must supply 1.05 V. + + dvdd-usb-ss-pll-supply: + description: PCIe/USB3 PLL power supply. Must supply 1.05 V. + + hvdd-usb-ss-pll-e-supply: + description: High-voltage PLLE power supply. Must supply 1.8 V. + +allOf: + - $ref: usb-xhci.yaml + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/tegra186-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/memory/tegra186-mc.h> + #include <dt-bindings/power/tegra186-powergate.h> + #include <dt-bindings/reset/tegra186-reset.h> + + usb@3530000 { + compatible = "nvidia,tegra186-xusb"; + reg = <0x03530000 0x8000>, + <0x03538000 0x1000>; + reg-names = "hcd", "fpci"; + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA186_CLK_XUSB_HOST>, + <&bpmp TEGRA186_CLK_XUSB_FALCON>, + <&bpmp TEGRA186_CLK_XUSB_SS>, + <&bpmp TEGRA186_CLK_XUSB_CORE_SS>, + <&bpmp TEGRA186_CLK_CLK_M>, + <&bpmp TEGRA186_CLK_XUSB_FS>, + <&bpmp TEGRA186_CLK_PLLU>, + <&bpmp TEGRA186_CLK_CLK_M>, + <&bpmp TEGRA186_CLK_PLLE>; + clock-names = "xusb_host", "xusb_falcon_src", "xusb_ss", + "xusb_ss_src", "xusb_hs_src", "xusb_fs_src", + "pll_u_480m", "clk_m", "pll_e"; + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_XUSBC>, + <&bpmp TEGRA186_POWER_DOMAIN_XUSBA>; + power-domain-names = "xusb_host", "xusb_ss"; + interconnects = <&mc TEGRA186_MEMORY_CLIENT_XUSB_HOSTR &emc>, + <&mc TEGRA186_MEMORY_CLIENT_XUSB_HOSTW &emc>; + interconnect-names = "dma-mem", "write"; + iommus = <&smmu TEGRA186_SID_XUSB_HOST>; + nvidia,xusb-padctl = <&padctl>; + + #address-cells = <1>; + #size-cells = <0>; + + phys = <&phy_usb2_0>, <&phy_usb2_1>, <&phy_usb3_0>; + phy-names = "usb2-0", "usb2-1", "usb3-0"; + }; diff --git a/dts/Bindings/usb/nvidia,tegra194-xusb.yaml b/dts/Bindings/usb/nvidia,tegra194-xusb.yaml new file mode 100644 index 0000000000..b356793f73 --- /dev/null +++ b/dts/Bindings/usb/nvidia,tegra194-xusb.yaml @@ -0,0 +1,175 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/nvidia,tegra194-xusb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra194 xHCI controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +description: The Tegra xHCI controller supports both USB2 and USB3 interfaces + exposed by the Tegra XUSB pad controller. + +properties: + compatible: + const: nvidia,tegra194-xusb + + reg: + items: + - description: base and length of the xHCI host registers + - description: base and length of the XUSB FPCI registers + + reg-names: + items: + - const: hcd + - const: fpci + + interrupts: + items: + - description: xHCI host interrupt + - description: mailbox interrupt + + clocks: + items: + - description: XUSB host clock + - description: XUSB Falcon source clock + - description: XUSB SuperSpeed clock + - description: XUSB SuperSpeed source clock + - description: XUSB HighSpeed clock source + - description: XUSB FullSpeed clock source + - description: USB PLL + - description: reference clock + - description: I/O PLL + + clock-names: + items: + - const: xusb_host + - const: xusb_falcon_src + - const: xusb_ss + - const: xusb_ss_src + - const: xusb_hs_src + - const: xusb_fs_src + - const: pll_u_480m + - const: clk_m + - const: pll_e + + interconnects: + items: + - description: read client + - description: write client + + interconnect-names: + items: + - const: dma-mem # read + - const: write + + iommus: + maxItems: 1 + + nvidia,xusb-padctl: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to the XUSB pad controller that is used to configure + the USB pads used by the XHCI controller + + phys: + minItems: 1 + maxItems: 8 + + phy-names: + minItems: 1 + maxItems: 8 + items: + enum: + - usb2-0 + - usb2-1 + - usb2-2 + - usb2-3 + - usb3-0 + - usb3-1 + - usb3-2 + - usb3-3 + + power-domains: + items: + - description: XUSBC power domain (for Host and USB 2.0) + - description: XUSBA power domain (for SuperSpeed) + + power-domain-names: + items: + - const: xusb_host + - const: xusb_ss + + dvddio-pex-supply: + description: PCIe/USB3 analog logic power supply. Must supply 1.05 V. + + hvddio-pex-supply: + description: High-voltage PCIe/USB3 power supply. Must supply 1.8 V. + + avdd-usb-supply: + description: USB controller power supply. Must supply 3.3 V. + + avdd-pll-utmip-supply: + description: UTMI PLL power supply. Must supply 1.8 V. + + avdd-pll-uerefe-supply: + description: PLLE reference PLL power supply. Must supply 1.05 V. + + dvdd-usb-ss-pll-supply: + description: PCIe/USB3 PLL power supply. Must supply 1.05 V. + + hvdd-usb-ss-pll-e-supply: + description: High-voltage PLLE power supply. Must supply 1.8 V. + +allOf: + - $ref: usb-xhci.yaml + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/tegra194-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/memory/tegra194-mc.h> + #include <dt-bindings/power/tegra194-powergate.h> + #include <dt-bindings/reset/tegra194-reset.h> + + usb@3610000 { + compatible = "nvidia,tegra194-xusb"; + reg = <0x03610000 0x40000>, + <0x03600000 0x10000>; + reg-names = "hcd", "fpci"; + + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&bpmp TEGRA194_CLK_XUSB_CORE_HOST>, + <&bpmp TEGRA194_CLK_XUSB_FALCON>, + <&bpmp TEGRA194_CLK_XUSB_CORE_SS>, + <&bpmp TEGRA194_CLK_XUSB_SS>, + <&bpmp TEGRA194_CLK_CLK_M>, + <&bpmp TEGRA194_CLK_XUSB_FS>, + <&bpmp TEGRA194_CLK_UTMIPLL>, + <&bpmp TEGRA194_CLK_CLK_M>, + <&bpmp TEGRA194_CLK_PLLE>; + clock-names = "xusb_host", "xusb_falcon_src", + "xusb_ss", "xusb_ss_src", "xusb_hs_src", + "xusb_fs_src", "pll_u_480m", "clk_m", + "pll_e"; + interconnects = <&mc TEGRA194_MEMORY_CLIENT_XUSB_HOSTR &emc>, + <&mc TEGRA194_MEMORY_CLIENT_XUSB_HOSTW &emc>; + interconnect-names = "dma-mem", "write"; + iommus = <&smmu TEGRA194_SID_XUSB_HOST>; + + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_XUSBC>, + <&bpmp TEGRA194_POWER_DOMAIN_XUSBA>; + power-domain-names = "xusb_host", "xusb_ss"; + + nvidia,xusb-padctl = <&xusb_padctl>; + + phys = <&phy_usb2_0>, <&phy_usb2_1>, <&phy_usb2_3>, <&phy_usb3_0>, + <&phy_usb3_2>, <&phy_usb3_3>; + phy-names = "usb2-0", "usb2-1", "usb2-3", "usb3-0", "usb3-2", "usb3-3"; + }; diff --git a/dts/Bindings/usb/nvidia,tegra210-xusb.yaml b/dts/Bindings/usb/nvidia,tegra210-xusb.yaml new file mode 100644 index 0000000000..90296613b3 --- /dev/null +++ b/dts/Bindings/usb/nvidia,tegra210-xusb.yaml @@ -0,0 +1,195 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/nvidia,tegra210-xusb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra210 xHCI controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +description: The Tegra xHCI controller supports both USB2 and USB3 interfaces + exposed by the Tegra XUSB pad controller. + +properties: + compatible: + const: nvidia,tegra210-xusb + + reg: + items: + - description: base and length of the xHCI host registers + - description: base and length of the XUSB FPCI registers + - description: base and length of the XUSB IPFS registers + + reg-names: + items: + - const: hcd + - const: fpci + - const: ipfs + + interrupts: + items: + - description: xHCI host interrupt + - description: mailbox interrupt + + clocks: + items: + - description: XUSB host clock + - description: XUSB host source clock + - description: XUSB Falcon source clock + - description: XUSB SuperSpeed clock + - description: XUSB SuperSpeed clock divider + - description: XUSB SuperSpeed source clock + - description: XUSB HighSpeed clock source + - description: XUSB FullSpeed clock source + - description: USB PLL + - description: reference clock + - description: I/O PLL + + clock-names: + items: + - const: xusb_host + - const: xusb_host_src + - const: xusb_falcon_src + - const: xusb_ss + - const: xusb_ss_div2 + - const: xusb_ss_src + - const: xusb_hs_src + - const: xusb_fs_src + - const: pll_u_480m + - const: clk_m + - const: pll_e + + resets: + items: + - description: reset for the XUSB host controller + - description: reset for the SuperSpeed logic + - description: shared reset for xusb_{ss,hs,fs,falcon,host}_src. + + reset-names: + items: + - const: xusb_host + - const: xusb_ss + - const: xusb_src + + nvidia,xusb-padctl: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to the XUSB pad controller that is used to configure + the USB pads used by the XHCI controller + + phys: + minItems: 1 + maxItems: 9 + + phy-names: + minItems: 1 + maxItems: 9 + items: + enum: + - usb2-0 + - usb2-1 + - usb2-2 + - usb2-3 + - hsic-0 + - usb3-0 + - usb3-1 + - usb3-2 + - usb3-3 + + power-domains: + items: + - description: XUSBC power domain (for Host and USB 2.0) + - description: XUSBA power domain (for SuperSpeed) + + power-domain-names: + items: + - const: xusb_host + - const: xusb_ss + + dvddio-pex-supply: + description: PCIe/USB3 analog logic power supply. Must supply 1.05 V. + + hvddio-pex-supply: + description: High-voltage PCIe/USB3 power supply. Must supply 1.8 V. + + avdd-usb-supply: + description: USB controller power supply. Must supply 3.3 V. + + avdd-pll-utmip-supply: + description: UTMI PLL power supply. Must supply 1.8 V. + + avdd-pll-uerefe-supply: + description: PLLE reference PLL power supply. Must supply 1.05 V. + + dvdd-usb-ss-pll-supply: + description: PCIe/USB3 PLL power supply. Must supply 1.05 V. + + hvdd-usb-ss-pll-e-supply: + description: High-voltage PLLE power supply. Must supply 1.8 V. + +allOf: + - $ref: usb-xhci.yaml + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/tegra210-car.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + usb@70090000 { + compatible = "nvidia,tegra210-xusb"; + reg = <0x70090000 0x8000>, + <0x70098000 0x1000>, + <0x70099000 0x1000>; + reg-names = "hcd", "fpci", "ipfs"; + + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&tegra_car TEGRA210_CLK_XUSB_HOST>, + <&tegra_car TEGRA210_CLK_XUSB_HOST_SRC>, + <&tegra_car TEGRA210_CLK_XUSB_FALCON_SRC>, + <&tegra_car TEGRA210_CLK_XUSB_SS>, + <&tegra_car TEGRA210_CLK_XUSB_SS_DIV2>, + <&tegra_car TEGRA210_CLK_XUSB_SS_SRC>, + <&tegra_car TEGRA210_CLK_XUSB_HS_SRC>, + <&tegra_car TEGRA210_CLK_XUSB_FS_SRC>, + <&tegra_car TEGRA210_CLK_PLL_U_480M>, + <&tegra_car TEGRA210_CLK_CLK_M>, + <&tegra_car TEGRA210_CLK_PLL_E>; + clock-names = "xusb_host", "xusb_host_src", + "xusb_falcon_src", "xusb_ss", + "xusb_ss_div2", "xusb_ss_src", + "xusb_hs_src", "xusb_fs_src", + "pll_u_480m", "clk_m", "pll_e"; + resets = <&tegra_car 89>, <&tegra_car 156>, + <&tegra_car 143>; + reset-names = "xusb_host", "xusb_ss", "xusb_src"; + power-domains = <&pd_xusbhost>, <&pd_xusbss>; + power-domain-names = "xusb_host", "xusb_ss"; + + nvidia,xusb-padctl = <&padctl>; + + phys = <&phy_usb2_0>, <&phy_usb2_1>, <&phy_usb2_2>, <&phy_usb2_3>, + <&phy_pcie_6>, <&phy_pcie_5>; + phy-names = "usb2-0", "usb2-1", "usb2-2", "usb2-3", "usb3-0", + "usb3-1"; + dvddio-pex-supply = <&vdd_pex_1v05>; + hvddio-pex-supply = <&vdd_1v8>; + avdd-usb-supply = <&vdd_3v3_sys>; + avdd-pll-utmip-supply = <&vdd_1v8>; + avdd-pll-uerefe-supply = <&vdd_pex_1v05>; + dvdd-usb-ss-pll-supply = <&vdd_pex_1v05>; + hvdd-usb-ss-pll-e-supply = <&vdd_1v8>; + + #address-cells = <1>; + #size-cells = <0>; + + ethernet@1 { + compatible = "usb955,9ff"; + reg = <1>; + }; + }; diff --git a/dts/Bindings/usb/nvidia,tegra234-xusb.yaml b/dts/Bindings/usb/nvidia,tegra234-xusb.yaml new file mode 100644 index 0000000000..db761dcbf7 --- /dev/null +++ b/dts/Bindings/usb/nvidia,tegra234-xusb.yaml @@ -0,0 +1,159 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/nvidia,tegra234-xusb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra234 xHCI controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +description: | + The Tegra xHCI controller supports both USB2 and USB3 interfaces exposed by + the Tegra XUSB pad controller. The xHCI controller controls up to eight + ports; there are four USB 2.0 ports and four USB 3.2 Gen1 x1 ports. + +properties: + compatible: + const: nvidia,tegra234-xusb + + reg: + items: + - description: xHCI host registers + - description: XUSB FPCI registers + - description: XUSB bar2 registers + + reg-names: + items: + - const: hcd + - const: fpci + - const: bar2 + + interrupts: + items: + - description: xHCI host interrupt + - description: mailbox interrupt + + clocks: + items: + - description: XUSB host clock + - description: XUSB Falcon source clock + - description: XUSB SuperSpeed clock + - description: XUSB SuperSpeed source clock + - description: XUSB HighSpeed clock source + - description: XUSB FullSpeed clock source + - description: USB PLL + - description: reference clock + - description: I/O PLL + + clock-names: + items: + - const: xusb_host + - const: xusb_falcon_src + - const: xusb_ss + - const: xusb_ss_src + - const: xusb_hs_src + - const: xusb_fs_src + - const: pll_u_480m + - const: clk_m + - const: pll_e + + interconnects: + items: + - description: read client + - description: write client + + interconnect-names: + items: + - const: dma-mem # read + - const: write + + iommus: + maxItems: 1 + + nvidia,xusb-padctl: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to the XUSB pad controller that is used to configure + the USB pads used by the XHCI controller + + phys: + minItems: 1 + maxItems: 8 + + phy-names: + minItems: 1 + maxItems: 8 + items: + enum: + - usb2-0 + - usb2-1 + - usb2-2 + - usb2-3 + - usb3-0 + - usb3-1 + - usb3-2 + - usb3-3 + + power-domains: + items: + - description: XUSBC power domain (for Host and USB 2.0) + - description: XUSBA power domain (for SuperSpeed) + + power-domain-names: + items: + - const: xusb_host + - const: xusb_ss + + dma-coherent: true + +allOf: + - $ref: usb-xhci.yaml + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/tegra234-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/memory/tegra234-mc.h> + #include <dt-bindings/power/tegra234-powergate.h> + + usb@3610000 { + compatible = "nvidia,tegra234-xusb"; + reg = <0x03610000 0x40000>, + <0x03600000 0x10000>, + <0x03650000 0x10000>; + reg-names = "hcd", "fpci", "bar2"; + + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&bpmp TEGRA234_CLK_XUSB_CORE_HOST>, + <&bpmp TEGRA234_CLK_XUSB_FALCON>, + <&bpmp TEGRA234_CLK_XUSB_CORE_SS>, + <&bpmp TEGRA234_CLK_XUSB_SS>, + <&bpmp TEGRA234_CLK_CLK_M>, + <&bpmp TEGRA234_CLK_XUSB_FS>, + <&bpmp TEGRA234_CLK_UTMIP_PLL>, + <&bpmp TEGRA234_CLK_CLK_M>, + <&bpmp TEGRA234_CLK_PLLE>; + clock-names = "xusb_host", "xusb_falcon_src", + "xusb_ss", "xusb_ss_src", "xusb_hs_src", + "xusb_fs_src", "pll_u_480m", "clk_m", + "pll_e"; + interconnects = <&mc TEGRA234_MEMORY_CLIENT_XUSB_HOSTR &emc>, + <&mc TEGRA234_MEMORY_CLIENT_XUSB_HOSTW &emc>; + interconnect-names = "dma-mem", "write"; + iommus = <&smmu_niso1 TEGRA234_SID_XUSB_HOST>; + + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_XUSBC>, + <&bpmp TEGRA234_POWER_DOMAIN_XUSBA>; + power-domain-names = "xusb_host", "xusb_ss"; + + nvidia,xusb-padctl = <&xusb_padctl>; + + phys = <&pad_lanes_usb2_0>; + phy-names = "usb2-0"; + }; diff --git a/dts/Bindings/usb/nxp,isp1760.yaml b/dts/Bindings/usb/nxp,isp1760.yaml index f238848ad0..e2743a4b95 100644 --- a/dts/Bindings/usb/nxp,isp1760.yaml +++ b/dts/Bindings/usb/nxp,isp1760.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/usb/nxp,isp1760.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: NXP ISP1760 family controller bindings +title: NXP ISP1760 family controller maintainers: - Sebastian Siewior <bigeasy@linutronix.de> diff --git a/dts/Bindings/usb/nxp,ptn36502.yaml b/dts/Bindings/usb/nxp,ptn36502.yaml new file mode 100644 index 0000000000..eee548ac1a --- /dev/null +++ b/dts/Bindings/usb/nxp,ptn36502.yaml @@ -0,0 +1,94 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/nxp,ptn36502.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP PTN36502 Type-C USB 3.1 Gen 1 and DisplayPort v1.2 combo redriver + +maintainers: + - Luca Weiss <luca.weiss@fairphone.com> + +properties: + compatible: + enum: + - nxp,ptn36502 + + reg: + maxItems: 1 + + vdd18-supply: + description: Power supply for VDD18 pin + + retimer-switch: + description: Flag the port as possible handle of SuperSpeed signals retiming + type: boolean + + orientation-switch: + description: Flag the port as possible handler of orientation switching + type: boolean + + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Super Speed (SS) Output endpoint to the Type-C connector + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Super Speed (SS) Input endpoint from the Super-Speed PHY + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: + Sideband Use (SBU) AUX lines endpoint to the Type-C connector for the purpose of + handling altmode muxing and orientation switching. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + typec-mux@1a { + compatible = "nxp,ptn36502"; + reg = <0x1a>; + + vdd18-supply = <&usb_redrive_1v8>; + + retimer-switch; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + usb_con_ss: endpoint { + remote-endpoint = <&typec_con_ss>; + }; + }; + port@1 { + reg = <1>; + phy_con_ss: endpoint { + remote-endpoint = <&usb_phy_ss>; + }; + }; + port@2 { + reg = <2>; + usb_con_sbu: endpoint { + remote-endpoint = <&typec_dp_aux>; + }; + }; + }; + }; + }; +... diff --git a/dts/Bindings/usb/nxp,ptn5110.yaml b/dts/Bindings/usb/nxp,ptn5110.yaml new file mode 100644 index 0000000000..eaedb4cc6b --- /dev/null +++ b/dts/Bindings/usb/nxp,ptn5110.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/nxp,ptn5110.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP PTN5110 Type-C Port Controller + +maintainers: + - Li Jun <jun.li@nxp.com> + +properties: + compatible: + const: nxp,ptn5110 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + connector: + type: object + $ref: /schemas/connector/usb-connector.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - connector + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/usb/pd.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + tcpci@50 { + compatible = "nxp,ptn5110"; + reg = <0x50>; + interrupt-parent = <&gpio3>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + + usb_con: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + power-role = "dual"; + try-power-role = "sink"; + source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>; + sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM) PDO_VAR(5000, 12000, 2000)>; + op-sink-microwatt = <10000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + typec1_dr_sw: endpoint { + remote-endpoint = <&usb1_drd_sw>; + }; + }; + }; + }; + }; + }; diff --git a/dts/Bindings/usb/ohci-nxp.txt b/dts/Bindings/usb/ohci-nxp.txt deleted file mode 100644 index 71e28c1017..0000000000 --- a/dts/Bindings/usb/ohci-nxp.txt +++ /dev/null @@ -1,24 +0,0 @@ -* OHCI controller, NXP ohci-nxp variant - -Required properties: -- compatible: must be "nxp,ohci-nxp" -- reg: physical base address of the controller and length of memory mapped - region. -- interrupts: The OHCI interrupt -- transceiver: phandle of the associated ISP1301 device - this is necessary for - the UDC controller for connecting to the USB physical layer - -Example (LPC32xx): - - isp1301: usb-transceiver@2c { - compatible = "nxp,isp1301"; - reg = <0x2c>; - }; - - ohci@31020000 { - compatible = "nxp,ohci-nxp"; - reg = <0x31020000 0x300>; - interrupt-parent = <&mic>; - interrupts = <0x3b 0>; - transceiver = <&isp1301>; - }; diff --git a/dts/Bindings/usb/ohci-omap3.txt b/dts/Bindings/usb/ohci-omap3.txt deleted file mode 100644 index ce8c47cff6..0000000000 --- a/dts/Bindings/usb/ohci-omap3.txt +++ /dev/null @@ -1,15 +0,0 @@ -OMAP HS USB OHCI controller (OMAP3 and later) - -Required properties: - -- compatible: should be "ti,ohci-omap3" -- reg: should contain one register range i.e. start and length -- interrupts: description of the interrupt line - -Example for OMAP4: - -usbhsohci: ohci@4a064800 { - compatible = "ti,ohci-omap3"; - reg = <0x4a064800 0x400>; - interrupts = <0 76 0x4>; -}; diff --git a/dts/Bindings/usb/ohci-st.txt b/dts/Bindings/usb/ohci-st.txt index 44c998c16f..1c735573ab 100644 --- a/dts/Bindings/usb/ohci-st.txt +++ b/dts/Bindings/usb/ohci-st.txt @@ -15,7 +15,7 @@ See: Documentation/devicetree/bindings/clock/clock-bindings.txt - resets : phandle to the powerdown and reset controller for the USB IP - reset-names : should be "power" and "softreset". -See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt +See: Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml See: Documentation/devicetree/bindings/reset/reset.txt Example: diff --git a/dts/Bindings/usb/onnn,nb7vpq904m.yaml b/dts/Bindings/usb/onnn,nb7vpq904m.yaml new file mode 100644 index 0000000000..c0201da002 --- /dev/null +++ b/dts/Bindings/usb/onnn,nb7vpq904m.yaml @@ -0,0 +1,141 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/onnn,nb7vpq904m.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ON Semiconductor Type-C DisplayPort ALT Mode Linear Redriver + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +properties: + compatible: + enum: + - onnn,nb7vpq904m + + reg: + maxItems: 1 + + vcc-supply: + description: power supply (1.8V) + + enable-gpios: true + + retimer-switch: + description: Flag the port as possible handle of SuperSpeed signals retiming + type: boolean + + orientation-switch: + description: Flag the port as possible handler of orientation switching + type: boolean + + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Super Speed (SS) Output endpoint to the Type-C connector + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + description: Super Speed (SS) Input endpoint from the Super-Speed PHY + unevaluatedProperties: false + + properties: + endpoint: + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false + + properties: + data-lanes: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: | + An array of physical data lane indexes. Position determines how + lanes are connected to the redriver, It is assumed the same order + is kept on the other side of the redriver. + Lane number represents the following + - 0 is RX2 lane + - 1 is TX2 lane + - 2 is TX1 lane + - 3 is RX1 lane + The position determines the physical port of the redriver, in the + order A, B, C & D. + oneOf: + - items: + - const: 0 + - const: 1 + - const: 2 + - const: 3 + description: | + This is the lanes default layout + - Port A to RX2 lane + - Port B to TX2 lane + - Port C to TX1 lane + - Port D to RX1 lane + - items: + - const: 3 + - const: 2 + - const: 1 + - const: 0 + description: | + This is the USBRX2/USBTX2 and USBRX1/USBTX1 swapped lanes layout + - Port A to RX1 lane + - Port B to TX1 lane + - Port C to TX2 lane + - Port D to RX2 lane + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: + Sideband Use (SBU) AUX lines endpoint to the Type-C connector for the purpose of + handling altmode muxing and orientation switching. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + typec-mux@32 { + compatible = "onnn,nb7vpq904m"; + reg = <0x32>; + + vcc-supply = <&vreg_l15b_1p8>; + + retimer-switch; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + usb_con_ss: endpoint { + remote-endpoint = <&typec_con_ss>; + }; + }; + port@1 { + reg = <1>; + phy_con_ss: endpoint { + remote-endpoint = <&usb_phy_ss>; + data-lanes = <3 2 1 0>; + }; + }; + port@2 { + reg = <2>; + usb_con_sbu: endpoint { + remote-endpoint = <&typec_dp_aux>; + }; + }; + }; + }; + }; +... diff --git a/dts/Bindings/usb/pxa-usb.txt b/dts/Bindings/usb/pxa-usb.txt index 9c331799b8..53fdae4fa6 100644 --- a/dts/Bindings/usb/pxa-usb.txt +++ b/dts/Bindings/usb/pxa-usb.txt @@ -22,7 +22,7 @@ Optional properties: Example: usb0: ohci@4c000000 { - compatible = "marvell,pxa-ohci", "usb-ohci"; + compatible = "marvell,pxa-ohci"; reg = <0x4c000000 0x100000>; interrupts = <18>; marvell,enable-port1; diff --git a/dts/Bindings/usb/qcom,dwc3.yaml b/dts/Bindings/usb/qcom,dwc3.yaml index 2bdaba023c..63d150b216 100644 --- a/dts/Bindings/usb/qcom,dwc3.yaml +++ b/dts/Bindings/usb/qcom,dwc3.yaml @@ -7,25 +7,47 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm SuperSpeed DWC3 USB SoC controller maintainers: - - Manu Gautam <mgautam@codeaurora.org> + - Wesley Cheng <quic_wcheng@quicinc.com> properties: compatible: items: - enum: + - qcom,ipq4019-dwc3 + - qcom,ipq5018-dwc3 + - qcom,ipq5332-dwc3 - qcom,ipq6018-dwc3 + - qcom,ipq8064-dwc3 + - qcom,ipq8074-dwc3 + - qcom,ipq9574-dwc3 + - qcom,msm8953-dwc3 + - qcom,msm8994-dwc3 - qcom,msm8996-dwc3 - qcom,msm8998-dwc3 + - qcom,qcm2290-dwc3 + - qcom,qcs404-dwc3 + - qcom,sa8775p-dwc3 - qcom,sc7180-dwc3 - qcom,sc7280-dwc3 + - qcom,sc8280xp-dwc3 - qcom,sdm660-dwc3 + - qcom,sdm670-dwc3 - qcom,sdm845-dwc3 - qcom,sdx55-dwc3 + - qcom,sdx65-dwc3 + - qcom,sdx75-dwc3 - qcom,sm4250-dwc3 - qcom,sm6115-dwc3 + - qcom,sm6125-dwc3 + - qcom,sm6350-dwc3 + - qcom,sm6375-dwc3 - qcom,sm8150-dwc3 - qcom,sm8250-dwc3 - qcom,sm8350-dwc3 + - qcom,sm8450-dwc3 + - qcom,sm8550-dwc3 + - qcom,sm8650-dwc3 + - qcom,x1e80100-dwc3 - const: qcom,dwc3 reg: @@ -44,37 +66,27 @@ properties: description: specifies a phandle to PM domain provider node maxItems: 1 + required-opps: + maxItems: 1 + clocks: - description: - A list of phandle and clock-specifier pairs for the clocks - listed in clock-names. - items: - - description: System Config NOC clock. - - description: Master/Core clock, has to be >= 125 MHz - for SS operation and >= 60MHz for HS operation. - - description: System bus AXI clock. - - description: Mock utmi clock needed for ITP/SOF generation - in host mode. Its frequency should be 19.2MHz. - - description: Sleep clock, used for wakeup when - USB3 core goes into low power mode (U3). + description: | + Several clocks are used, depending on the variant. Typical ones are:: + - cfg_noc:: System Config NOC clock. + - core:: Master/Core clock, has to be >= 125 MHz for SS operation and >= + 60MHz for HS operation. + - iface:: System bus AXI clock. + - sleep:: Sleep clock, used for wakeup when USB3 core goes into low + power mode (U3). + - mock_utmi:: Mock utmi clock needed for ITP/SOF generation in host + mode. Its frequency should be 19.2MHz. + minItems: 1 + maxItems: 9 clock-names: - items: - - const: cfg_noc - - const: core - - const: iface - - const: mock_utmi - - const: sleep - - assigned-clocks: - items: - - description: Phandle and clock specifier of MOCK_UTMI_CLK. - - description: Phandle and clock specifoer of MASTER_CLK. + minItems: 1 + maxItems: 9 - assigned-clock-rates: - items: - - description: Must be 19.2MHz (19200000). - - description: Must be >= 60 MHz in HS mode, >= 125 MHz in SS mode. resets: maxItems: 1 @@ -87,20 +99,29 @@ properties: - const: apps-usb interrupts: - items: - - description: The interrupt that is asserted - when a wakeup event is received on USB2 bus. - - description: The interrupt that is asserted - when a wakeup event is received on USB3 bus. - - description: Wakeup event on DM line. - - description: Wakeup event on DP line. + description: | + Different types of interrupts are used based on HS PHY used on target: + - pwr_event: Used for wakeup based on other power events. + - hs_phY_irq: Apart from DP/DM/QUSB2 PHY interrupts, there is + hs_phy_irq which is not triggered by default and its + functionality is mutually exclusive to that of + {dp/dm}_hs_phy_irq and qusb2_phy_irq. + - qusb2_phy: SoCs with QUSB2 PHY do not have separate DP/DM IRQs and + expose only a single IRQ whose behavior can be modified + by the QUSB2PHY_INTR_CTRL register. The required DPSE/ + DMSE configuration is done in QUSB2PHY_INTR_CTRL register + of PHY address space. + - {dp/dm}_hs_phy_irq: These IRQ's directly reflect changes on the DP/ + DM pads of the SoC. These are used for wakeup + only on SoCs with non-QUSB2 targets with + exception of SDM670/SDM845/SM6350. + - ss_phy_irq: Used for remote wakeup in Super Speed mode of operation. + minItems: 2 + maxItems: 5 interrupt-names: - items: - - const: hs_phy_irq - - const: ss_phy_irq - - const: dm_hs_phy_irq - - const: dp_hs_phy_irq + minItems: 2 + maxItems: 5 qcom,select-utmi-as-pipe-clk: description: @@ -109,11 +130,17 @@ properties: HS/FS/LS modes are supported. type: boolean + wakeup-source: true + # Required child node: patternProperties: "^usb@[0-9a-f]+$": $ref: snps,dwc3.yaml# + unevaluatedProperties: false + + properties: + wakeup-source: false required: - compatible @@ -121,12 +148,328 @@ required: - "#address-cells" - "#size-cells" - ranges - - power-domains - clocks - clock-names - interrupts - interrupt-names +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq4019-dwc3 + then: + properties: + clocks: + maxItems: 3 + clock-names: + items: + - const: core + - const: sleep + - const: mock_utmi + + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq8064-dwc3 + then: + properties: + clocks: + items: + - description: Master/Core clock, has to be >= 125 MHz + for SS operation and >= 60MHz for HS operation. + clock-names: + items: + - const: core + + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq9574-dwc3 + - qcom,msm8953-dwc3 + - qcom,msm8996-dwc3 + - qcom,msm8998-dwc3 + - qcom,sa8775p-dwc3 + - qcom,sc7180-dwc3 + - qcom,sc7280-dwc3 + - qcom,sdm670-dwc3 + - qcom,sdm845-dwc3 + - qcom,sdx55-dwc3 + - qcom,sdx65-dwc3 + - qcom,sdx75-dwc3 + - qcom,sm6350-dwc3 + then: + properties: + clocks: + maxItems: 5 + clock-names: + items: + - const: cfg_noc + - const: core + - const: iface + - const: sleep + - const: mock_utmi + + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq6018-dwc3 + then: + properties: + clocks: + minItems: 3 + maxItems: 4 + clock-names: + oneOf: + - items: + - const: core + - const: sleep + - const: mock_utmi + - items: + - const: cfg_noc + - const: core + - const: sleep + - const: mock_utmi + + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq8074-dwc3 + then: + properties: + clocks: + maxItems: 4 + clock-names: + items: + - const: cfg_noc + - const: core + - const: sleep + - const: mock_utmi + + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq5018-dwc3 + - qcom,ipq5332-dwc3 + - qcom,msm8994-dwc3 + - qcom,qcs404-dwc3 + then: + properties: + clocks: + maxItems: 4 + clock-names: + items: + - const: core + - const: iface + - const: sleep + - const: mock_utmi + + - if: + properties: + compatible: + contains: + enum: + - qcom,sc8280xp-dwc3 + - qcom,x1e80100-dwc3 + then: + properties: + clocks: + maxItems: 9 + clock-names: + items: + - const: cfg_noc + - const: core + - const: iface + - const: sleep + - const: mock_utmi + - const: noc_aggr + - const: noc_aggr_north + - const: noc_aggr_south + - const: noc_sys + + - if: + properties: + compatible: + contains: + enum: + - qcom,sdm660-dwc3 + then: + properties: + clocks: + minItems: 4 + maxItems: 5 + clock-names: + oneOf: + - items: + - const: cfg_noc + - const: core + - const: iface + - const: sleep + - const: mock_utmi + - items: + - const: cfg_noc + - const: core + - const: sleep + - const: mock_utmi + + - if: + properties: + compatible: + contains: + enum: + - qcom,qcm2290-dwc3 + - qcom,sm6115-dwc3 + - qcom,sm6125-dwc3 + - qcom,sm8150-dwc3 + - qcom,sm8250-dwc3 + - qcom,sm8450-dwc3 + - qcom,sm8550-dwc3 + - qcom,sm8650-dwc3 + then: + properties: + clocks: + minItems: 6 + clock-names: + items: + - const: cfg_noc + - const: core + - const: iface + - const: sleep + - const: mock_utmi + - const: xo + + - if: + properties: + compatible: + contains: + enum: + - qcom,sm8350-dwc3 + then: + properties: + clocks: + minItems: 5 + maxItems: 6 + clock-names: + minItems: 5 + items: + - const: cfg_noc + - const: core + - const: iface + - const: sleep + - const: mock_utmi + - const: xo + + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq5018-dwc3 + - qcom,ipq6018-dwc3 + - qcom,ipq8074-dwc3 + - qcom,msm8953-dwc3 + - qcom,msm8998-dwc3 + then: + properties: + interrupts: + minItems: 2 + maxItems: 3 + interrupt-names: + items: + - const: pwr_event + - const: qusb2_phy + - const: ss_phy_irq + + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8996-dwc3 + - qcom,qcs404-dwc3 + - qcom,sdm660-dwc3 + - qcom,sm6115-dwc3 + - qcom,sm6125-dwc3 + then: + properties: + interrupts: + minItems: 3 + maxItems: 4 + interrupt-names: + items: + - const: pwr_event + - const: qusb2_phy + - const: hs_phy_irq + - const: ss_phy_irq + + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq5332-dwc3 + - qcom,x1e80100-dwc3 + then: + properties: + interrupts: + maxItems: 4 + interrupt-names: + items: + - const: pwr_event + - const: dp_hs_phy_irq + - const: dm_hs_phy_irq + - const: ss_phy_irq + + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq4019-dwc3 + - qcom,ipq8064-dwc3 + - qcom,msm8994-dwc3 + - qcom,sa8775p-dwc3 + - qcom,sc7180-dwc3 + - qcom,sc7280-dwc3 + - qcom,sc8280xp-dwc3 + - qcom,sdm670-dwc3 + - qcom,sdm845-dwc3 + - qcom,sdx55-dwc3 + - qcom,sdx65-dwc3 + - qcom,sdx75-dwc3 + - qcom,sm4250-dwc3 + - qcom,sm6350-dwc3 + - qcom,sm8150-dwc3 + - qcom,sm8250-dwc3 + - qcom,sm8350-dwc3 + - qcom,sm8450-dwc3 + - qcom,sm8550-dwc3 + - qcom,sm8650-dwc3 + then: + properties: + interrupts: + minItems: 4 + maxItems: 5 + interrupt-names: + items: + - const: pwr_event + - const: hs_phy_irq + - const: dp_hs_phy_irq + - const: dm_hs_phy_irq + - const: ss_phy_irq + additionalProperties: false examples: @@ -148,21 +491,25 @@ examples: clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>, <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, - <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_PRIM_SLEEP_CLK>; - clock-names = "cfg_noc", "core", "iface", "mock_utmi", - "sleep"; + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>; assigned-clock-rates = <19200000>, <150000000>; - interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hs_phy_irq", "ss_phy_irq", - "dm_hs_phy_irq", "dp_hs_phy_irq"; + interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 489 IRQ_TYPE_EDGE_BOTH>, + <GIC_SPI 488 IRQ_TYPE_EDGE_BOTH>, + <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", "hs_phy_irq", + "dp_hs_phy_irq", "dm_hs_phy_irq", "ss_phy_irq"; power-domains = <&gcc USB30_PRIM_GDSC>; diff --git a/dts/Bindings/usb/qcom,pmic-typec.yaml b/dts/Bindings/usb/qcom,pmic-typec.yaml new file mode 100644 index 0000000000..55df3129a0 --- /dev/null +++ b/dts/Bindings/usb/qcom,pmic-typec.yaml @@ -0,0 +1,190 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/qcom,pmic-typec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm PMIC based USB Type-C block + +maintainers: + - Bryan O'Donoghue <bryan.odonoghue@linaro.org> + +description: + Qualcomm PMIC Type-C block + +properties: + compatible: + enum: + - qcom,pm8150b-typec + + connector: + type: object + $ref: /schemas/connector/usb-connector.yaml# + unevaluatedProperties: false + + reg: + description: Type-C port and pdphy SPMI register base offsets + maxItems: 2 + + interrupts: + items: + - description: Type-C CC attach notification, VBUS error, tCCDebounce done + - description: Type-C VCONN powered + - description: Type-C CC state change + - description: Type-C VCONN over-current + - description: Type-C VBUS state change + - description: Type-C Attach/detach notification + - description: Type-C Legacy cable detect + - description: Type-C Try.Src Try.Snk state change + - description: Power Domain Signal TX - HardReset or CableReset signal TX + - description: Power Domain Signal RX - HardReset or CableReset signal RX + - description: Power Domain TX complete + - description: Power Domain RX complete + - description: Power Domain TX fail + - description: Power Domain TX message discard + - description: Power Domain RX message discard + - description: Power Domain Fast Role Swap event + + interrupt-names: + items: + - const: or-rid-detect-change + - const: vpd-detect + - const: cc-state-change + - const: vconn-oc + - const: vbus-change + - const: attach-detach + - const: legacy-cable-detect + - const: try-snk-src-detect + - const: sig-tx + - const: sig-rx + - const: msg-tx + - const: msg-rx + - const: msg-tx-failed + - const: msg-tx-discarded + - const: msg-rx-discarded + - const: fr-swap + + vdd-vbus-supply: + description: VBUS power supply. + + vdd-pdphy-supply: + description: VDD regulator supply to the PDPHY. + + port: + $ref: /schemas/graph.yaml#/properties/port + description: + Contains a port which produces data-role switching messages. + +required: + - compatible + - reg + - interrupts + - interrupt-names + - vdd-vbus-supply + - vdd-pdphy-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/usb/pd.h> + + pmic { + #address-cells = <1>; + #size-cells = <0>; + + pm8150b_typec: typec@1500 { + compatible = "qcom,pm8150b-typec"; + reg = <0x1500>, + <0x1700>; + + interrupts = <0x2 0x15 0x00 IRQ_TYPE_EDGE_RISING>, + <0x2 0x15 0x01 IRQ_TYPE_EDGE_BOTH>, + <0x2 0x15 0x02 IRQ_TYPE_EDGE_RISING>, + <0x2 0x15 0x03 IRQ_TYPE_EDGE_BOTH>, + <0x2 0x15 0x04 IRQ_TYPE_EDGE_RISING>, + <0x2 0x15 0x05 IRQ_TYPE_EDGE_RISING>, + <0x2 0x15 0x06 IRQ_TYPE_EDGE_BOTH>, + <0x2 0x15 0x07 IRQ_TYPE_EDGE_RISING>, + <0x2 0x17 0x00 IRQ_TYPE_EDGE_RISING>, + <0x2 0x17 0x01 IRQ_TYPE_EDGE_RISING>, + <0x2 0x17 0x02 IRQ_TYPE_EDGE_RISING>, + <0x2 0x17 0x03 IRQ_TYPE_EDGE_RISING>, + <0x2 0x17 0x04 IRQ_TYPE_EDGE_RISING>, + <0x2 0x17 0x05 IRQ_TYPE_EDGE_RISING>, + <0x2 0x17 0x06 IRQ_TYPE_EDGE_RISING>, + <0x2 0x17 0x07 IRQ_TYPE_EDGE_RISING>; + + interrupt-names = "or-rid-detect-change", + "vpd-detect", + "cc-state-change", + "vconn-oc", + "vbus-change", + "attach-detach", + "legacy-cable-detect", + "try-snk-src-detect", + "sig-tx", + "sig-rx", + "msg-tx", + "msg-rx", + "msg-tx-failed", + "msg-tx-discarded", + "msg-rx-discarded", + "fr-swap"; + + vdd-vbus-supply = <&pm8150b_vbus>; + vdd-pdphy-supply = <&vreg_l2a_3p1>; + + connector { + compatible = "usb-c-connector"; + + power-role = "source"; + data-role = "dual"; + self-powered; + + source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_DUAL_ROLE | + PDO_FIXED_USB_COMM | PDO_FIXED_DATA_SWAP)>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + pmic_typec_mux_out: endpoint { + remote-endpoint = <&usb_phy_typec_mux_in>; + }; + }; + + port@1 { + reg = <1>; + pmic_typec_role_switch_out: endpoint { + remote-endpoint = <&usb_role_switch_in>; + }; + }; + }; + }; + }; + }; + + usb { + dr_mode = "otg"; + usb-role-switch; + port { + usb_role_switch_in: endpoint { + remote-endpoint = <&pmic_typec_role_switch_out>; + }; + }; + }; + + usb-phy { + orientation-switch; + port { + usb_phy_typec_mux_in: endpoint { + remote-endpoint = <&pmic_typec_mux_out>; + }; + }; + }; + +... diff --git a/dts/Bindings/usb/qcom,wcd939x-usbss.yaml b/dts/Bindings/usb/qcom,wcd939x-usbss.yaml new file mode 100644 index 0000000000..7ddfd3313a --- /dev/null +++ b/dts/Bindings/usb/qcom,wcd939x-usbss.yaml @@ -0,0 +1,102 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/qcom,wcd939x-usbss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm WCD9380/WCD9385 USB SubSystem Altmode/Analog Audio Switch + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +description: + Qualcomm WCD9390/WCD9395 is a standalone Hi-Fi audio codec IC with a + functionally separate USB SubSystem for Altmode/Analog Audio Switch + accessible over an I2C interface. + The Audio Headphone and Microphone data path between the Codec and the + USB-C Mux subsystems are external to the IC, thus requiring DT port-endpoint + graph description to handle USB-C altmode & orientation switching for Audio + Accessory Mode. + +properties: + compatible: + oneOf: + - const: qcom,wcd9390-usbss + - items: + - const: qcom,wcd9395-usbss + - const: qcom,wcd9390-usbss + + reg: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + vdd-supply: + description: USBSS VDD power supply + + mode-switch: + description: Flag the port as possible handle of altmode switching + type: boolean + + orientation-switch: + description: Flag the port as possible handler of orientation switching + type: boolean + + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + A port node to link the WCD939x USB SubSystem to a TypeC controller for the + purpose of handling altmode muxing and orientation switching. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + A port node to link the WCD939x USB SubSystem to the Codec SubSystem for the + purpose of handling USB-C Audio Accessory Mode muxing and orientation switching. + +required: + - compatible + - reg + - ports + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + typec-mux@42 { + compatible = "qcom,wcd9390-usbss"; + reg = <0x42>; + + vdd-supply = <&vreg_bob>; + + mode-switch; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + wcd9390_usbss_sbu: endpoint { + remote-endpoint = <&typec_sbu>; + }; + }; + port@1 { + reg = <1>; + wcd9390_usbss_codec: endpoint { + remote-endpoint = <&wcd9390_codec_usbss>; + }; + }; + }; + }; + }; +... diff --git a/dts/Bindings/usb/realtek,rtd-dwc3.yaml b/dts/Bindings/usb/realtek,rtd-dwc3.yaml new file mode 100644 index 0000000000..345d0132d4 --- /dev/null +++ b/dts/Bindings/usb/realtek,rtd-dwc3.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2023 Realtek Semiconductor Corporation +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/realtek,rtd-dwc3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Realtek DWC3 USB SoC Controller Glue + +maintainers: + - Stanley Chang <stanley_chang@realtek.com> + +description: + The Realtek DHC SoC embeds a DWC3 USB IP Core configured for USB 2.0 + and USB 3.0 in host or dual-role mode. + +properties: + compatible: + items: + - enum: + - realtek,rtd1295-dwc3 + - realtek,rtd1315e-dwc3 + - realtek,rtd1319-dwc3 + - realtek,rtd1319d-dwc3 + - realtek,rtd1395-dwc3 + - realtek,rtd1619-dwc3 + - realtek,rtd1619b-dwc3 + - const: realtek,rtd-dwc3 + + reg: + items: + - description: Address and length of register set for wrapper of dwc3 core. + - description: Address and length of register set for pm control. + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + + ranges: true + +patternProperties: + "^usb@[0-9a-f]+$": + $ref: snps,dwc3.yaml# + description: Required child node + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - ranges + +additionalProperties: false + +examples: + - | + usb@98013e00 { + compatible = "realtek,rtd1319d-dwc3", "realtek,rtd-dwc3"; + reg = <0x98013e00 0x140>, <0x98013f60 0x4>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + usb@98050000 { + compatible = "snps,dwc3"; + reg = <0x98050000 0x9000>; + interrupts = <0 94 4>; + phys = <&usb2phy &usb3phy>; + phy-names = "usb2-phy", "usb3-phy"; + dr_mode = "otg"; + usb-role-switch; + role-switch-default-mode = "host"; + snps,dis_u2_susphy_quirk; + snps,parkmode-disable-ss-quirk; + snps,parkmode-disable-hs-quirk; + maximum-speed = "high-speed"; + }; + }; diff --git a/dts/Bindings/usb/realtek,rtd-type-c.yaml b/dts/Bindings/usb/realtek,rtd-type-c.yaml new file mode 100644 index 0000000000..6142b0b5b5 --- /dev/null +++ b/dts/Bindings/usb/realtek,rtd-type-c.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2023 Realtek Semiconductor Corporation +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/realtek,rtd-type-c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Realtek DHC RTD SoCs USB Type-C Connector detection + +maintainers: + - Stanley Chang <stanley_chang@realtek.com> + +description: + Realtek digital home center (DHC) RTD series SoCs include a type c module. + This module is able to detect the state of type c connector. + +properties: + compatible: + enum: + - realtek,rtd1295-type-c + - realtek,rtd1312c-type-c + - realtek,rtd1315e-type-c + - realtek,rtd1319-type-c + - realtek,rtd1319d-type-c + - realtek,rtd1395-type-c + - realtek,rtd1619-type-c + - realtek,rtd1619b-type-c + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + nvmem-cell-names: + items: + - const: usb-cal + + nvmem-cells: + maxItems: 1 + description: + The phandle to nvmem cell that contains the trimming data. + The type c parameter trimming data specified via efuse. + If unspecified, default value is used. + + realtek,rd-ctrl-gpios: + description: The gpio node to control external Rd on board. + maxItems: 1 + + connector: + $ref: /schemas/connector/usb-connector.yaml# + description: Properties for usb c connector. + type: object + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + type-c@7220 { + compatible = "realtek,rtd1619b-type-c"; + reg = <0x7220 0x20>; + interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&usb_cc1_pins>, <&usb_cc2_pins>; + nvmem-cells = <&otp_usb_cal>; + nvmem-cell-names = "usb-cal"; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + power-role = "dual"; + }; + }; diff --git a/dts/Bindings/usb/realtek,rts5411.yaml b/dts/Bindings/usb/realtek,rts5411.yaml index 04ee255eb4..f0784d2e86 100644 --- a/dts/Bindings/usb/realtek,rts5411.yaml +++ b/dts/Bindings/usb/realtek,rts5411.yaml @@ -1,10 +1,10 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/usb/realtek,rts5411.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Binding for the Realtek RTS5411 USB 3.0 hub controller +title: Realtek RTS5411 USB 3.0 hub controller maintainers: - Matthias Kaehlcke <mka@chromium.org> @@ -25,13 +25,13 @@ properties: description: phandle to the regulator that provides power to the hub. - companion-hub: - $ref: '/schemas/types.yaml#/definitions/phandle' + peer-hub: + $ref: /schemas/types.yaml#/definitions/phandle description: - phandle to the companion hub on the controller. + phandle to the peer hub on the controller. required: - - companion-hub + - peer-hub - compatible - reg @@ -49,7 +49,7 @@ examples: compatible = "usbbda,5411"; reg = <1>; vdd-supply = <&pp3300_hub>; - companion-hub = <&hub_3_0>; + peer-hub = <&hub_3_0>; }; /* 3.0 hub on port 2 */ @@ -57,6 +57,6 @@ examples: compatible = "usbbda,411"; reg = <2>; vdd-supply = <&pp3300_hub>; - companion-hub = <&hub_2_0>; + peer-hub = <&hub_2_0>; }; }; diff --git a/dts/Bindings/usb/renesas,rzn1-usbf.yaml b/dts/Bindings/usb/renesas,rzn1-usbf.yaml new file mode 100644 index 0000000000..b6e84a2a69 --- /dev/null +++ b/dts/Bindings/usb/renesas,rzn1-usbf.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/renesas,rzn1-usbf.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/N1 SoCs USBF (USB Function) controller + +description: | + The Renesas USBF controller is an USB2.0 device + controller (UDC). + +maintainers: + - Herve Codina <herve.codina@bootlin.com> + +properties: + compatible: + items: + - enum: + - renesas,r9a06g032-usbf + - const: renesas,rzn1-usbf + + reg: + maxItems: 1 + + clocks: + items: + - description: Internal bus clock (AHB) for Function + - description: Internal bus clock (AHB) for Power Management + + clock-names: + items: + - const: hclkf + - const: hclkpm + + power-domains: + maxItems: 1 + + interrupts: + items: + - description: The USBF EPC interrupt + - description: The USBF AHB-EPC interrupt + +required: + - compatible + - reg + - clocks + - clock-names + - power-domains + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/r9a06g032-sysctrl.h> + + usb@4001e000 { + compatible = "renesas,r9a06g032-usbf", "renesas,rzn1-usbf"; + reg = <0x4001e000 0x2000>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sysctrl R9A06G032_HCLK_USBF>, + <&sysctrl R9A06G032_HCLK_USBPM>; + clock-names = "hclkf", "hclkpm"; + power-domains = <&sysctrl>; + }; diff --git a/dts/Bindings/usb/renesas,rzv2m-usb3drd.yaml b/dts/Bindings/usb/renesas,rzv2m-usb3drd.yaml new file mode 100644 index 0000000000..ff625600d9 --- /dev/null +++ b/dts/Bindings/usb/renesas,rzv2m-usb3drd.yaml @@ -0,0 +1,129 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/renesas,rzv2m-usb3drd.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/V2M USB 3.1 DRD controller + +maintainers: + - Biju Das <biju.das.jz@bp.renesas.com> + +description: | + The RZ/V2{M, MA} USB3.1 DRD module supports the following functions + * Role swapping function by the ID pin of the Micro-AB receptacle + * Battery Charging Specification Revision 1.2 + +properties: + compatible: + items: + - enum: + - renesas,r9a09g011-usb3drd # RZ/V2M + - renesas,r9a09g055-usb3drd # RZ/V2MA + - const: renesas,rzv2m-usb3drd + + reg: + maxItems: 1 + + interrupts: + items: + - description: Dual Role Device (DRD) + - description: Battery Charging + - description: Global Purpose Input + + interrupt-names: + items: + - const: drd + - const: bc + - const: gpi + + clocks: + items: + - description: Peripheral AXI clock + - description: APB clock + + clock-names: + items: + - const: axi + - const: reg + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + ranges: true + + '#address-cells': + enum: [ 1, 2 ] + + '#size-cells': + enum: [ 1, 2 ] + +patternProperties: + "^usb3peri@[0-9a-f]+$": + type: object + $ref: /schemas/usb/renesas,usb3-peri.yaml + + "^usb@[0-9a-f]+$": + type: object + $ref: renesas,usb-xhci.yaml# + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + - clock-names + - power-domains + - resets + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r9a09g011-cpg.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + usb3drd: usb@85070400 { + compatible = "renesas,r9a09g011-usb3drd", "renesas,rzv2m-usb3drd"; + reg = <0x85070400 0x100>; + interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "drd", "bc", "gpi"; + clocks = <&cpg CPG_MOD R9A09G011_USB_ACLK_P>, + <&cpg CPG_MOD R9A09G011_USB_PCLK>; + clock-names = "axi", "reg"; + power-domains = <&cpg>; + resets = <&cpg R9A09G011_USB_DRD_RESET>; + ranges; + #address-cells = <1>; + #size-cells = <1>; + + usb3host: usb@85060000 { + compatible = "renesas,r9a09g011-xhci", + "renesas,rzv2m-xhci"; + reg = <0x85060000 0x2000>; + interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A09G011_USB_ACLK_H>, + <&cpg CPG_MOD R9A09G011_USB_PCLK>; + clock-names = "axi", "reg"; + power-domains = <&cpg>; + resets = <&cpg R9A09G011_USB_ARESETN_H>; + }; + + usb3peri: usb3peri@85070000 { + compatible = "renesas,r9a09g011-usb3-peri", + "renesas,rzv2m-usb3-peri"; + reg = <0x85070000 0x400>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A09G011_USB_ACLK_P>, + <&cpg CPG_MOD R9A09G011_USB_PCLK>; + clock-names = "axi", "reg"; + power-domains = <&cpg>; + resets = <&cpg R9A09G011_USB_ARESETN_P>; + }; + }; diff --git a/dts/Bindings/usb/renesas,usb-xhci.yaml b/dts/Bindings/usb/renesas,usb-xhci.yaml index 4c5efaf023..1a07c0d2b1 100644 --- a/dts/Bindings/usb/renesas,usb-xhci.yaml +++ b/dts/Bindings/usb/renesas,usb-xhci.yaml @@ -10,9 +10,6 @@ maintainers: - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> -allOf: - - $ref: "usb-xhci.yaml" - properties: compatible: oneOf: @@ -37,6 +34,11 @@ properties: - renesas,xhci-r8a77965 # R-Car M3-N - renesas,xhci-r8a77990 # R-Car E3 - const: renesas,rcar-gen3-xhci # R-Car Gen3 and RZ/G2 + - items: + - enum: + - renesas,r9a09g011-xhci # RZ/V2M + - renesas,r9a09g055-xhci # RZ/V2MA + - const: renesas,rzv2m-xhci # RZ/{V2M, V2MA} reg: maxItems: 1 @@ -45,7 +47,16 @@ properties: maxItems: 1 clocks: - maxItems: 1 + minItems: 1 + items: + - description: Main clock for host + - description: Register access clock + + clock-names: + minItems: 1 + items: + - const: axi + - const: reg phys: maxItems: 1 @@ -68,6 +79,28 @@ required: - power-domains - resets +allOf: + - $ref: usb-xhci.yaml + + - if: + properties: + compatible: + contains: + enum: + - renesas,rzv2m-xhci + then: + properties: + clocks: + minItems: 2 + clock-names: + minItems: 2 + required: + - clock-names + else: + properties: + clocks: + maxItems: 1 + unevaluatedProperties: false examples: diff --git a/dts/Bindings/usb/renesas,usb3-peri.yaml b/dts/Bindings/usb/renesas,usb3-peri.yaml index 9fcf54b10b..b2b811a0ad 100644 --- a/dts/Bindings/usb/renesas,usb3-peri.yaml +++ b/dts/Bindings/usb/renesas,usb3-peri.yaml @@ -11,18 +11,25 @@ maintainers: properties: compatible: - items: - - enum: - - renesas,r8a774a1-usb3-peri # RZ/G2M - - renesas,r8a774b1-usb3-peri # RZ/G2N - - renesas,r8a774c0-usb3-peri # RZ/G2E - - renesas,r8a774e1-usb3-peri # RZ/G2H - - renesas,r8a7795-usb3-peri # R-Car H3 - - renesas,r8a7796-usb3-peri # R-Car M3-W - - renesas,r8a77961-usb3-peri # R-Car M3-W+ - - renesas,r8a77965-usb3-peri # R-Car M3-N - - renesas,r8a77990-usb3-peri # R-Car E3 - - const: renesas,rcar-gen3-usb3-peri + oneOf: + - items: + - enum: + - renesas,r8a774a1-usb3-peri # RZ/G2M + - renesas,r8a774b1-usb3-peri # RZ/G2N + - renesas,r8a774c0-usb3-peri # RZ/G2E + - renesas,r8a774e1-usb3-peri # RZ/G2H + - renesas,r8a7795-usb3-peri # R-Car H3 + - renesas,r8a7796-usb3-peri # R-Car M3-W + - renesas,r8a77961-usb3-peri # R-Car M3-W+ + - renesas,r8a77965-usb3-peri # R-Car M3-N + - renesas,r8a77990-usb3-peri # R-Car E3 + - const: renesas,rcar-gen3-usb3-peri + + - items: + - enum: + - renesas,r9a09g011-usb3-peri # RZ/V2M + - renesas,r9a09g055-usb3-peri # RZ/V2MA + - const: renesas,rzv2m-usb3-peri reg: maxItems: 1 @@ -31,7 +38,16 @@ properties: maxItems: 1 clocks: - maxItems: 1 + minItems: 1 + items: + - description: Main clock + - description: Register access clock + + clock-names: + minItems: 1 + items: + - const: axi + - const: reg phys: maxItems: 1 @@ -78,6 +94,27 @@ required: - interrupts - clocks +allOf: + - if: + properties: + compatible: + contains: + enum: + - renesas,rzv2m-usb3-peri + then: + properties: + clocks: + minItems: 2 + clock-names: + minItems: 2 + required: + - clock-names + - resets + else: + properties: + clocks: + maxItems: 1 + additionalProperties: false examples: diff --git a/dts/Bindings/usb/renesas,usbhs.yaml b/dts/Bindings/usb/renesas,usbhs.yaml index 012fe80a76..40ada78f23 100644 --- a/dts/Bindings/usb/renesas,usbhs.yaml +++ b/dts/Bindings/usb/renesas,usbhs.yaml @@ -19,7 +19,9 @@ properties: - items: - enum: - renesas,usbhs-r7s9210 # RZ/A2 + - renesas,usbhs-r9a07g043 # RZ/G2UL and RZ/Five - renesas,usbhs-r9a07g044 # RZ/G2{L,LC} + - renesas,usbhs-r9a07g054 # RZ/V2L - const: renesas,rza2-usbhs - items: @@ -116,7 +118,10 @@ allOf: properties: compatible: contains: - const: renesas,usbhs-r9a07g044 + enum: + - renesas,usbhs-r9a07g043 + - renesas,usbhs-r9a07g044 + - renesas,usbhs-r9a07g054 then: properties: interrupts: @@ -125,6 +130,8 @@ allOf: - description: U2P_INT_DMA[0] - description: U2P_INT_DMA[1] - description: U2P_INT_DMAERR + required: + - resets else: properties: interrupts: diff --git a/dts/Bindings/usb/richtek,rt1711h.yaml b/dts/Bindings/usb/richtek,rt1711h.yaml new file mode 100644 index 0000000000..8da4d2ad1a --- /dev/null +++ b/dts/Bindings/usb/richtek,rt1711h.yaml @@ -0,0 +1,100 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/richtek,rt1711h.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT1711H Type-C Port Switch and Power Delivery controller + +maintainers: + - Gene Chen <gene_chen@richtek.com> + +description: | + The RT1711H is a USB Type-C controller that complies with the latest + USB Type-C and PD standards. It does the USB Type-C detection including attach + and orientation. It integrates the physical layer of the USB BMC power + delivery protocol to allow up to 100W of power. The BMC PD block enables full + support for alternative interfaces of the Type-C specification. + +properties: + compatible: + enum: + - richtek,rt1711h + - richtek,rt1715 + description: + RT1711H support PD20, RT1715 support PD30 except Fast Role Swap. + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + wakeup-source: + type: boolean + + connector: + type: object + $ref: /schemas/connector/usb-connector.yaml# + description: + Properties for usb c connector. + +additionalProperties: false + +required: + - compatible + - reg + - connector + - interrupts + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/usb/pd.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rt1711h@4e { + compatible = "richtek,rt1711h"; + reg = <0x4e>; + interrupts-extended = <&gpio26 3 IRQ_TYPE_LEVEL_LOW>; + wakeup-source; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + power-role = "dual"; + try-power-role = "sink"; + source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>; + sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>; + op-sink-microwatt = <10000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&usb_hs>; + }; + }; + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&usb_ss>; + }; + }; + port@2 { + reg = <2>; + endpoint { + remote-endpoint = <&dp_aux>; + }; + }; + }; + }; + }; + }; +... diff --git a/dts/Bindings/usb/richtek,rt1719.yaml b/dts/Bindings/usb/richtek,rt1719.yaml new file mode 100644 index 0000000000..07bec1fe6e --- /dev/null +++ b/dts/Bindings/usb/richtek,rt1719.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/richtek,rt1719.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT1719 sink-only Type-C PD controller + +maintainers: + - ChiYuan Huang <cy_huang@richtek.com> + +description: | + The RT1719 is a sink-only USB Type-C controller that complies with the latest + USB Type-C and PD standards. It does the USB Type-C detection including attach + and orientation. It integrates the physical layer of the USB BMC power + delivery protocol to allow up to 100W of power. The BMC PD block enables full + support for alternative interfaces of the Type-C specification. + +properties: + compatible: + enum: + - richtek,rt1719 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + wakeup-source: + description: enable IRQ remote wakeup, see power/wakeup-source.txt + type: boolean + + connector: + type: object + $ref: ../connector/usb-connector.yaml# + description: + Properties for usb c connector. + +additionalProperties: false + +required: + - compatible + - reg + - connector + - interrupts + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rt1719@43 { + compatible = "richtek,rt1719"; + reg = <0x43>; + interrupts-extended = <&gpio26 2 IRQ_TYPE_LEVEL_LOW>; + wakeup-source; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&usb_hs>; + }; + }; + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&usb_ss>; + }; + }; + }; + }; + }; + }; +... diff --git a/dts/Bindings/usb/rockchip,dwc3.yaml b/dts/Bindings/usb/rockchip,dwc3.yaml index 04077f2d7f..c4924113f9 100644 --- a/dts/Bindings/usb/rockchip,dwc3.yaml +++ b/dts/Bindings/usb/rockchip,dwc3.yaml @@ -15,21 +15,19 @@ description: Phy documentation is provided in the following places. USB2.0 PHY - Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml + Documentation/devicetree/bindings/phy/rockchip,inno-usb2phy.yaml Type-C PHY Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt -allOf: - - $ref: snps,dwc3.yaml# - select: properties: compatible: contains: enum: - rockchip,rk3328-dwc3 - - rockchip,rk3399-dwc3 + - rockchip,rk3568-dwc3 + - rockchip,rk3588-dwc3 required: - compatible @@ -38,7 +36,8 @@ properties: items: - enum: - rockchip,rk3328-dwc3 - - rockchip,rk3399-dwc3 + - rockchip,rk3568-dwc3 + - rockchip,rk3588-dwc3 - const: snps,dwc3 reg: @@ -58,7 +57,9 @@ properties: Master/Core clock, must to be >= 62.5 MHz for SS operation and >= 30MHz for HS operation - description: - Controller grf clock + Controller grf clock OR UTMI clock + - description: + PIPE clock clock-names: minItems: 3 @@ -66,7 +67,10 @@ properties: - const: ref_clk - const: suspend_clk - const: bus_clk - - const: grf_clk + - enum: + - grf_clk + - utmi + - const: pipe power-domains: maxItems: 1 @@ -86,9 +90,55 @@ required: - clocks - clock-names +allOf: + - $ref: snps,dwc3.yaml# + - if: + properties: + compatible: + contains: + const: rockchip,rk3328-dwc3 + then: + properties: + clocks: + minItems: 3 + maxItems: 4 + clock-names: + minItems: 3 + items: + - const: ref_clk + - const: suspend_clk + - const: bus_clk + - const: grf_clk + - if: + properties: + compatible: + contains: + const: rockchip,rk3568-dwc3 + then: + properties: + clocks: + maxItems: 3 + clock-names: + maxItems: 3 + - if: + properties: + compatible: + contains: + const: rockchip,rk3588-dwc3 + then: + properties: + clock-names: + minItems: 3 + items: + - const: ref_clk + - const: suspend_clk + - const: bus_clk + - const: utmi + - const: pipe + examples: - | - #include <dt-bindings/clock/rk3399-cru.h> + #include <dt-bindings/clock/rk3328-cru.h> #include <dt-bindings/interrupt-controller/arm-gic.h> bus { @@ -96,11 +146,11 @@ examples: #size-cells = <2>; usbdrd3_0: usb@fe800000 { - compatible = "rockchip,rk3399-dwc3", "snps,dwc3"; + compatible = "rockchip,rk3328-dwc3", "snps,dwc3"; reg = <0x0 0xfe800000 0x0 0x100000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru SCLK_USB3OTG0_REF>, <&cru SCLK_USB3OTG0_SUSPEND>, - <&cru ACLK_USB3OTG0>, <&cru ACLK_USB3_GRF>; + clocks = <&cru SCLK_USB3OTG_REF>, <&cru SCLK_USB3OTG_SUSPEND>, + <&cru ACLK_USB3OTG>; clock-names = "ref_clk", "suspend_clk", "bus_clk", "grf_clk"; dr_mode = "otg"; diff --git a/dts/Bindings/usb/rockchip,rk3399-dwc3.yaml b/dts/Bindings/usb/rockchip,rk3399-dwc3.yaml new file mode 100644 index 0000000000..3159f9a6a0 --- /dev/null +++ b/dts/Bindings/usb/rockchip,rk3399-dwc3.yaml @@ -0,0 +1,115 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/rockchip,rk3399-dwc3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RK3399 SuperSpeed DWC3 USB SoC controller + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +properties: + compatible: + const: rockchip,rk3399-dwc3 + + '#address-cells': + const: 2 + + '#size-cells': + const: 2 + + ranges: true + + clocks: + items: + - description: + Controller reference clock, must to be 24 MHz + - description: + Controller suspend clock, must to be 24 MHz or 32 KHz + - description: + Master/Core clock, must to be >= 62.5 MHz for SS + operation and >= 30MHz for HS operation + - description: + USB3 aclk peri + - description: + USB3 aclk + - description: + Controller grf clock + + clock-names: + items: + - const: ref_clk + - const: suspend_clk + - const: bus_clk + - const: aclk_usb3_rksoc_axi_perf + - const: aclk_usb3 + - const: grf_clk + + resets: + maxItems: 1 + + reset-names: + const: usb3-otg + +patternProperties: + '^usb@': + $ref: snps,dwc3.yaml# + +additionalProperties: false + +required: + - compatible + - '#address-cells' + - '#size-cells' + - ranges + - clocks + - clock-names + - resets + - reset-names + +examples: + - | + #include <dt-bindings/clock/rk3399-cru.h> + #include <dt-bindings/power/rk3399-power.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + bus { + #address-cells = <2>; + #size-cells = <2>; + + usb { + compatible = "rockchip,rk3399-dwc3"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&cru SCLK_USB3OTG0_REF>, <&cru SCLK_USB3OTG0_SUSPEND>, + <&cru ACLK_USB3OTG0>, <&cru ACLK_USB3_RKSOC_AXI_PERF>, + <&cru ACLK_USB3>, <&cru ACLK_USB3_GRF>; + clock-names = "ref_clk", "suspend_clk", + "bus_clk", "aclk_usb3_rksoc_axi_perf", + "aclk_usb3", "grf_clk"; + resets = <&cru SRST_A_USB3_OTG0>; + reset-names = "usb3-otg"; + + usb@fe800000 { + compatible = "snps,dwc3"; + reg = <0x0 0xfe800000 0x0 0x100000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru SCLK_USB3OTG0_REF>, <&cru ACLK_USB3OTG0>, + <&cru SCLK_USB3OTG0_SUSPEND>; + clock-names = "ref", "bus_early", "suspend"; + dr_mode = "otg"; + phys = <&u2phy0_otg>, <&tcphy0_usb3>; + phy-names = "usb2-phy", "usb3-phy"; + phy_type = "utmi_wide"; + snps,dis_enblslpm_quirk; + snps,dis-u2-freeclk-exists-quirk; + snps,dis_u2_susphy_quirk; + snps,dis-del-phy-power-chg-quirk; + snps,dis-tx-ipgap-linecheck-quirk; + power-domains = <&power RK3399_PD_USB3>; + }; + }; + }; +... diff --git a/dts/Bindings/usb/samsung,exynos-dwc3.yaml b/dts/Bindings/usb/samsung,exynos-dwc3.yaml new file mode 100644 index 0000000000..1ade99e85b --- /dev/null +++ b/dts/Bindings/usb/samsung,exynos-dwc3.yaml @@ -0,0 +1,145 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/samsung,exynos-dwc3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos SoC USB 3.0 DWC3 Controller + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +properties: + compatible: + enum: + - samsung,exynos5250-dwusb3 + - samsung,exynos5433-dwusb3 + - samsung,exynos7-dwusb3 + - samsung,exynos850-dwusb3 + + '#address-cells': + const: 1 + + clocks: + minItems: 1 + maxItems: 4 + + clock-names: + minItems: 1 + maxItems: 4 + + ranges: true + + '#size-cells': + const: 1 + + vdd10-supply: + description: 1.0V power supply + + vdd33-supply: + description: 3.0V/3.3V power supply + +patternProperties: + "^usb@[0-9a-f]+$": + $ref: snps,dwc3.yaml# + description: Required child node + +required: + - compatible + - '#address-cells' + - clocks + - clock-names + - ranges + - '#size-cells' + - vdd10-supply + - vdd33-supply + +allOf: + - if: + properties: + compatible: + contains: + const: samsung,exynos5250-dwusb3 + then: + properties: + clocks: + minItems: 1 + maxItems: 1 + clock-names: + items: + - const: usbdrd30 + + - if: + properties: + compatible: + contains: + const: samsung,exynos5433-dwusb3 + then: + properties: + clocks: + minItems: 4 + maxItems: 4 + clock-names: + items: + - const: aclk + - const: susp_clk + - const: phyclk + - const: pipe_pclk + + - if: + properties: + compatible: + contains: + const: samsung,exynos7-dwusb3 + then: + properties: + clocks: + minItems: 3 + maxItems: 3 + clock-names: + items: + - const: usbdrd30 + - const: usbdrd30_susp_clk + - const: usbdrd30_axius_clk + + - if: + properties: + compatible: + contains: + const: samsung,exynos850-dwusb3 + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: bus_early + - const: ref + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos5420.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + usb@12000000 { + compatible = "samsung,exynos5250-dwusb3"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x12000000 0x10000>; + clocks = <&clock CLK_USBD300>; + clock-names = "usbdrd30"; + vdd33-supply = <&ldo9_reg>; + vdd10-supply = <&ldo11_reg>; + + usb@0 { + compatible = "snps,dwc3"; + reg = <0x0 0x10000>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>; + phy-names = "usb2-phy", "usb3-phy"; + snps,dis_u3_susphy_quirk; + }; + }; diff --git a/dts/Bindings/usb/samsung,exynos-usb2.yaml b/dts/Bindings/usb/samsung,exynos-usb2.yaml new file mode 100644 index 0000000000..caa572dcee --- /dev/null +++ b/dts/Bindings/usb/samsung,exynos-usb2.yaml @@ -0,0 +1,107 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/samsung,exynos-usb2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos SoC USB 2.0 EHCI/OHCI Controller + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +properties: + compatible: + enum: + - samsung,exynos4210-ehci + - samsung,exynos4210-ohci + + clocks: + maxItems: 1 + + clock-names: + items: + - const: usbhost + + interrupts: + maxItems: 1 + + phys: + minItems: 1 + maxItems: 3 + + phy-names: + items: + enum: [host, hsic0, hsic1] + minItems: 1 + maxItems: 3 + + reg: + maxItems: 1 + + samsung,vbus-gpio: + description: + Only for controller in EHCI mode, if present, specifies the GPIO that + needs to be pulled up for the bus to be powered. + +required: + - compatible + - clocks + - clock-names + - interrupts + - phys + - phy-names + - reg + +allOf: + - $ref: usb-hcd.yaml# + - if: + properties: + compatible: + contains: + const: samsung,exynos4210-ohci + then: + properties: + samsung,vbus-gpio: false + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos5420.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + usb@12110000 { + compatible = "samsung,exynos4210-ehci"; + reg = <0x12110000 0x100>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_USBH20>; + clock-names = "usbhost"; + phys = <&usb2_phy 0>; + phy-names = "host"; + + #address-cells = <1>; + #size-cells = <0>; + + hub@1 { + compatible = "usb0424,9514"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + usbether@1 { + compatible = "usb0424,ec00"; + reg = <1>; + local-mac-address = [00 00 00 00 00 00]; + }; + }; + }; + + usb@12120000 { + compatible = "samsung,exynos4210-ohci"; + reg = <0x12120000 0x100>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_USBH20>; + clock-names = "usbhost"; + phys = <&usb2_phy 0>; + phy-names = "host"; + }; diff --git a/dts/Bindings/usb/samsung-hsotg.txt b/dts/Bindings/usb/samsung-hsotg.txt deleted file mode 100644 index 0388634598..0000000000 --- a/dts/Bindings/usb/samsung-hsotg.txt +++ /dev/null @@ -1,38 +0,0 @@ -Samsung High Speed USB OTG controller ------------------------------ - -The Samsung HSOTG IP can be found on Samsung SoCs, from S3C6400 onwards. -It gives functionality of OTG-compliant USB 2.0 host and device with -support for USB 2.0 high-speed (480Mbps) and full-speed (12 Mbps) -operation. - -Currently only device mode is supported. - -Binding details ------ - -Required properties: -- compatible: "samsung,s3c6400-hsotg" should be used for all currently - supported SoC, -- interrupts: specifier of interrupt signal of interrupt controller, - according to bindings of interrupt controller, -- clocks: contains an array of clock specifiers: - - first entry: OTG clock -- clock-names: contains array of clock names: - - first entry: must be "otg" -- vusb_d-supply: phandle to voltage regulator of digital section, -- vusb_a-supply: phandle to voltage regulator of analog section. - -Example ------ - - hsotg@12480000 { - compatible = "samsung,s3c6400-hsotg"; - reg = <0x12480000 0x20000>; - interrupts = <0 71 0>; - clocks = <&clock 305>; - clock-names = "otg"; - vusb_d-supply = <&vusb_reg>; - vusb_a-supply = <&vusbdac_reg>; - }; - diff --git a/dts/Bindings/usb/smsc,usb3503.yaml b/dts/Bindings/usb/smsc,usb3503.yaml index 39228a506b..6156dc26e6 100644 --- a/dts/Bindings/usb/smsc,usb3503.yaml +++ b/dts/Bindings/usb/smsc,usb3503.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/usb/smsc,usb3503.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: SMSC USB3503 High-Speed Hub Controller Device Tree Bindings +title: SMSC USB3503 High-Speed Hub Controller maintainers: - Dongjin Kim <tobetter@gmail.com> @@ -14,6 +14,7 @@ properties: enum: - smsc,usb3503 - smsc,usb3503a + - smsc,usb3803 reg: maxItems: 1 @@ -33,6 +34,12 @@ properties: description: > GPIO for reset + bypass-gpios: + maxItems: 1 + description: > + GPIO for bypass. + Control signal to select between HUB MODE and BYPASS MODE. + disabled-ports: $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 1 @@ -45,9 +52,11 @@ properties: property if all ports have to be enabled. initial-mode: - enum: [1, 2] + $ref: /schemas/types.yaml#/definitions/uint32 description: > - Specifies initial mode. 1 for Hub mode, 2 for standby mode. + Specifies initial mode. 1 for Hub mode, 2 for standby mode and 3 for bypass mode. + In bypass mode the downstream port 3 is connected to the upstream port with low + switch resistance R_on. clocks: maxItems: 1 @@ -70,6 +79,29 @@ properties: required: - compatible +allOf: + - if: + not: + properties: + compatible: + enum: + - smsc,usb3803 + then: + properties: + bypass-gpios: false + + - if: + required: + - bypass-gpios + then: + properties: + initial-mode: + enum: [1, 2, 3] + else: + properties: + initial-mode: + enum: [1, 2] + additionalProperties: false examples: @@ -77,7 +109,7 @@ examples: i2c { #address-cells = <1>; #size-cells = <0>; - + usb-hub@8 { compatible = "smsc,usb3503"; reg = <0x08>; @@ -92,6 +124,25 @@ examples: }; - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + usb-hub@8 { + compatible = "smsc,usb3803"; + reg = <0x08>; + connect-gpios = <&gpx3 0 1>; + disabled-ports = <2 3>; + intn-gpios = <&gpx3 4 1>; + reset-gpios = <&gpx3 5 1>; + bypass-gpios = <&gpx3 6 1>; + initial-mode = <3>; + clocks = <&clks 80>; + clock-names = "refclk"; + }; + }; + + - | #include <dt-bindings/gpio/gpio.h> usb-hub { diff --git a/dts/Bindings/usb/snps,dwc3.yaml b/dts/Bindings/usb/snps,dwc3.yaml index 25ac2c93dc..203a1eb666 100644 --- a/dts/Bindings/usb/snps,dwc3.yaml +++ b/dts/Bindings/usb/snps,dwc3.yaml @@ -36,20 +36,23 @@ properties: - const: synopsys,dwc3 deprecated: true + reg: + maxItems: 1 + interrupts: description: It's either a single common DWC3 interrupt (dwc_usb3) or individual interrupts for the host, gadget and DRD modes. minItems: 1 - maxItems: 3 + maxItems: 4 interrupt-names: minItems: 1 - maxItems: 3 + maxItems: 4 oneOf: - const: dwc_usb3 - items: - enum: [host, peripheral, otg] + enum: [host, peripheral, otg, wakeup] clocks: description: @@ -65,6 +68,15 @@ properties: - enum: [bus_early, ref, suspend] - true + dma-coherent: true + + extcon: + maxItems: 1 + deprecated: true + + iommus: + maxItems: 1 + usb-phy: minItems: 1 items: @@ -83,6 +95,16 @@ properties: - usb2-phy - usb3-phy + power-domains: + description: + The DWC3 has 2 power-domains. The power management unit (PMU) and + everything else. The PMU is typically always powered and may not have an + entry. + minItems: 1 + items: + - description: Core + - description: Power management unit + resets: minItems: 1 @@ -214,6 +236,11 @@ properties: When set, all SuperSpeed bus instances in park mode are disabled. type: boolean + snps,parkmode-disable-hs-quirk: + description: + When set, all HighSpeed bus instances in park mode are disabled. + type: boolean + snps,dis_metastability_quirk: description: When set, disable metastability workaround. CAUTION! Use only if you are @@ -226,6 +253,26 @@ properties: avoid -EPROTO errors with usbhid on some devices (Hikey 970). type: boolean + snps,gfladj-refclk-lpm-sel-quirk: + description: + When set, run the SOF/ITP counter based on ref_clk. + type: boolean + + snps,resume-hs-terminations: + description: + Fix the issue of HS terminations CRC error on resume by enabling this + quirk. When set, all the termsel, xcvrsel, opmode becomes 0 during end + of resume. This option is to support certain legacy ULPI PHYs. + type: boolean + + snps,ulpi-ext-vbus-drv: + description: + Some ULPI USB PHY does not support internal VBUS supply, and driving + the CPEN pin, requires the configuration of the ulpi DRVVBUSEXTERNAL + bit. When set, the xhci host will configure the USB2 PHY drives VBUS + with an external supply. + type: boolean + snps,is-utmi-l1-suspend: description: True when DWC3 asserts output signal utmi_l1_suspend_n, false when @@ -240,7 +287,7 @@ properties: description: High-Speed PHY interface selection between UTMI+ and ULPI when the DWC_USB3_HSPHY_INTERFACE has value 3. - $ref: /schemas/types.yaml#/definitions/uint8 + $ref: /schemas/types.yaml#/definitions/string enum: [utmi, ulpi] snps,quirk-frame-length-adjustment: @@ -257,8 +304,67 @@ properties: Value for REFCLKPER field of GUCTL register for reference clock period in nanoseconds, when the hardware set default does not match the actual clock. + + This binding is deprecated. Instead, provide an appropriate reference clock. + minimum: 8 + maximum: 62 + deprecated: true + + snps,rx-thr-num-pkt: + description: + USB RX packet threshold count. In host mode, this field specifies + the space that must be available in the RX FIFO before the core can + start the corresponding USB RX transaction (burst). + In device mode, this field specifies the space that must be + available in the RX FIFO before the core can send ERDY for a + flow-controlled endpoint. It is only used for SuperSpeed. + The valid values for this field are from 1 to 15. (DWC3 SuperSpeed + USB 3.0 Controller Databook) + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 1 + maximum: 15 + + snps,rx-max-burst: + description: + Max USB RX burst size. In host mode, this field specifies the + Maximum Bulk IN burst the DWC_usb3 core can perform. When the system + bus is slower than the USB, RX FIFO can overrun during a long burst. + You can program a smaller value to this field to limit the RX burst + size that the core can perform. It only applies to SS Bulk, + Isochronous, and Interrupt IN endpoints in the host mode. + In device mode, this field specifies the NUMP value that is sent in + ERDY for an OUT endpoint. + The valid values for this field are from 1 to 16. (DWC3 SuperSpeed + USB 3.0 Controller Databook) + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 1 + maximum: 16 + + snps,tx-thr-num-pkt: + description: + USB TX packet threshold count. This field specifies the number of + packets that must be in the TXFIFO before the core can start + transmission for the corresponding USB transaction (burst). + This count is valid in both host and device modes. It is only used + for SuperSpeed operation. + Valid values are from 1 to 15. (DWC3 SuperSpeed USB 3.0 Controller + Databook) + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 1 + maximum: 15 + + snps,tx-max-burst: + description: + Max USB TX burst size. When the system bus is slower than the USB, + TX FIFO can underrun during a long burst. Program a smaller value + to this field to limit the TX burst size that the core can execute. + In Host mode, it only applies to SS Bulk, Isochronous, and Interrupt + OUT endpoints. This value is not used in device mode. + Valid values are from 1 to 16. (DWC3 SuperSpeed USB 3.0 Controller + Databook) + $ref: /schemas/types.yaml#/definitions/uint8 minimum: 1 - maximum: 0x3ff + maximum: 16 snps,rx-thr-num-pkt-prd: description: @@ -326,6 +432,37 @@ properties: items: enum: [1, 4, 8, 16, 32, 64, 128, 256] + num-hc-interrupters: + maximum: 8 + default: 1 + + port: + $ref: /schemas/graph.yaml#/properties/port + description: + This port is used with the 'usb-role-switch' property to connect the + dwc3 to type C connector. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: + Those ports should be used with any connector to the data bus of this + controller using the OF graph bindings specified if the "usb-role-switch" + property is used. + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: High Speed (HS) data bus. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Super Speed (SS) data bus. + + wakeup-source: + $ref: /schemas/types.yaml#/definitions/flag + description: + Enable USB remote wakeup. + unevaluatedProperties: false required: diff --git a/dts/Bindings/usb/spear-usb.txt b/dts/Bindings/usb/spear-usb.txt deleted file mode 100644 index 1dc91cc459..0000000000 --- a/dts/Bindings/usb/spear-usb.txt +++ /dev/null @@ -1,35 +0,0 @@ -ST SPEAr SoC USB controllers: ------------------------------ - -EHCI: ------ - -Required properties: -- compatible: "st,spear600-ehci" -- interrupts: Should contain the EHCI interrupt - -Example: - - ehci@e1800000 { - compatible = "st,spear600-ehci", "usb-ehci"; - reg = <0xe1800000 0x1000>; - interrupt-parent = <&vic1>; - interrupts = <27>; - }; - - -OHCI: ------ - -Required properties: -- compatible: "st,spear600-ohci" -- interrupts: Should contain the OHCI interrupt - -Example: - - ohci@e1900000 { - compatible = "st,spear600-ohci", "usb-ohci"; - reg = <0xe1800000 0x1000>; - interrupt-parent = <&vic1>; - interrupts = <26>; - }; diff --git a/dts/Bindings/usb/st,stusb160x.yaml b/dts/Bindings/usb/st,stusb160x.yaml index ead1571e0e..acda2f47fb 100644 --- a/dts/Bindings/usb/st,stusb160x.yaml +++ b/dts/Bindings/usb/st,stusb160x.yaml @@ -1,10 +1,10 @@ # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- -$id: "http://devicetree.org/schemas/usb/st,stusb160x.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/usb/st,stusb160x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# -title: STMicroelectronics STUSB160x Type-C controller bindings +title: STMicroelectronics STUSB160x Type-C controller maintainers: - Amelie Delaunay <amelie.delaunay@foss.st.com> @@ -32,9 +32,8 @@ properties: connector: type: object - - allOf: - - $ref: ../connector/usb-connector.yaml + $ref: /schemas/connector/usb-connector.yaml# + unevaluatedProperties: false properties: compatible: @@ -57,7 +56,7 @@ additionalProperties: false examples: - | #include <dt-bindings/interrupt-controller/irq.h> - i2c4 { + i2c { #address-cells = <1>; #size-cells = <0>; @@ -76,9 +75,14 @@ examples: data-role = "dual"; typec-power-opmode = "default"; - port { - typec_con_ep: endpoint { - remote-endpoint = <&usbotg_hs_ep>; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + typec_con_ep: endpoint { + remote-endpoint = <&usbotg_hs_ep>; + }; }; }; }; diff --git a/dts/Bindings/usb/st,typec-stm32g0.yaml b/dts/Bindings/usb/st,typec-stm32g0.yaml new file mode 100644 index 0000000000..1cb68cabe1 --- /dev/null +++ b/dts/Bindings/usb/st,typec-stm32g0.yaml @@ -0,0 +1,91 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/st,typec-stm32g0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STM32G0 USB Type-C PD controller + +description: | + The STM32G0 MCU can be programmed to control Type-C connector(s) through I2C + typically using the UCSI protocol over I2C, with a dedicated alert + (interrupt) pin. + +maintainers: + - Fabrice Gasnier <fabrice.gasnier@foss.st.com> + +properties: + compatible: + const: st,stm32g0-typec + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + connector: + type: object + $ref: /schemas/connector/usb-connector.yaml# + unevaluatedProperties: false + + firmware-name: + description: | + Should contain the name of the default firmware image + file located on the firmware search path + + wakeup-source: true + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - connector + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + typec@53 { + compatible = "st,stm32g0-typec"; + reg = <0x53>; + /* Alert pin on GPIO PE12 */ + interrupts = <12 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpioe>; + + /* Example with one type-C connector */ + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + con_usb_c_ep: endpoint { + remote-endpoint = <&usb_ep>; + }; + }; + }; + }; + }; + }; + + usb { + usb-role-switch; + port { + usb_ep: endpoint { + remote-endpoint = <&con_usb_c_ep>; + }; + }; + }; +... diff --git a/dts/Bindings/usb/starfive,jh7110-usb.yaml b/dts/Bindings/usb/starfive,jh7110-usb.yaml new file mode 100644 index 0000000000..24aa9c10d6 --- /dev/null +++ b/dts/Bindings/usb/starfive,jh7110-usb.yaml @@ -0,0 +1,115 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/starfive,jh7110-usb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive JH7110 wrapper module for the Cadence USBSS-DRD controller + +maintainers: + - Minda Chen <minda.chen@starfivetech.com> + +properties: + compatible: + const: starfive,jh7110-usb + + ranges: true + + starfive,stg-syscon: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to System Register Controller stg_syscon node. + - description: dr mode register offset of STG_SYSCONSAIF__SYSCFG register for USB. + description: + The phandle to System Register Controller syscon node and the offset + of STG_SYSCONSAIF__SYSCFG register for USB. + + dr_mode: + enum: [host, otg, peripheral] + + "#address-cells": + enum: [1, 2] + + "#size-cells": + enum: [1, 2] + + clocks: + items: + - description: link power management clock + - description: standby clock + - description: APB clock + - description: AXI clock + - description: UTMI APB clock + + clock-names: + items: + - const: lpm + - const: stb + - const: apb + - const: axi + - const: utmi_apb + + resets: + items: + - description: Power up reset + - description: APB clock reset + - description: AXI clock reset + - description: UTMI APB clock reset + + reset-names: + items: + - const: pwrup + - const: apb + - const: axi + - const: utmi_apb + +patternProperties: + "^usb@[0-9a-f]+$": + $ref: cdns,usb3.yaml# + description: Required child node + +required: + - compatible + - ranges + - starfive,stg-syscon + - '#address-cells' + - '#size-cells' + - dr_mode + - clocks + - resets + +additionalProperties: false + +examples: + - | + usb@10100000 { + compatible = "starfive,jh7110-usb"; + ranges = <0x0 0x10100000 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + starfive,stg-syscon = <&stg_syscon 0x4>; + clocks = <&syscrg 4>, + <&stgcrg 5>, + <&stgcrg 1>, + <&stgcrg 3>, + <&stgcrg 2>; + clock-names = "lpm", "stb", "apb", "axi", "utmi_apb"; + resets = <&stgcrg 10>, + <&stgcrg 8>, + <&stgcrg 7>, + <&stgcrg 9>; + reset-names = "pwrup", "apb", "axi", "utmi_apb"; + dr_mode = "host"; + + usb@0 { + compatible = "cdns,usb3"; + reg = <0x0 0x10000>, + <0x10000 0x10000>, + <0x20000 0x10000>; + reg-names = "otg", "xhci", "dev"; + interrupts = <100>, <108>, <110>; + interrupt-names = "host", "peripheral", "otg"; + maximum-speed = "super-speed"; + }; + }; diff --git a/dts/Bindings/usb/ti,am62-usb.yaml b/dts/Bindings/usb/ti,am62-usb.yaml new file mode 100644 index 0000000000..fec5651f56 --- /dev/null +++ b/dts/Bindings/usb/ti,am62-usb.yaml @@ -0,0 +1,103 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/ti,am62-usb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI's AM62 wrapper module for the Synopsys USBSS-DRD controller + +maintainers: + - Aswath Govindraju <a-govindraju@ti.com> + +properties: + compatible: + const: ti,am62-usb + + reg: + maxItems: 1 + + ranges: true + + power-domains: + description: + PM domain provider node and an args specifier containing + the USB ISO device id value. See, + Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml + maxItems: 1 + + clocks: + description: Clock phandle to usb2_refclk + maxItems: 1 + + clock-names: + items: + - const: ref + + ti,vbus-divider: + description: + Should be present if USB VBUS line is connected to the + VBUS pin of the SoC via a 1/3 voltage divider. + type: boolean + + ti,syscon-phy-pll-refclk: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: Phandle to the SYSCON entry + - description: USB phy control register offset within SYSCON + description: + Specifier for conveying frequency of ref clock input, for the + operation of USB2PHY. + + '#address-cells': + const: 2 + + '#size-cells': + const: 2 + +patternProperties: + "^usb@[0-9a-f]+$": + $ref: snps,dwc3.yaml# + description: Required child node + +required: + - compatible + - reg + - power-domains + - clocks + - clock-names + - ti,syscon-phy-pll-refclk + +additionalProperties: false + +examples: + - | + #include <dt-bindings/soc/ti,sci_pm_domain.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/gpio/gpio.h> + + bus { + #address-cells = <2>; + #size-cells = <2>; + + usbss1: usb@f910000 { + compatible = "ti,am62-usb"; + reg = <0x00 0x0f910000 0x00 0x800>; + clocks = <&k3_clks 162 3>; + clock-names = "ref"; + ti,syscon-phy-pll-refclk = <&wkup_conf 0x4018>; + power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <2>; + #size-cells = <2>; + + usb@31100000 { + compatible = "snps,dwc3"; + reg = <0x00 0x31100000 0x00 0x50000>; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */ + <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */ + interrupt-names = "host", "peripheral"; + maximum-speed = "high-speed"; + dr_mode = "otg"; + }; + }; + }; diff --git a/dts/Bindings/usb/ti,hd3ss3220.yaml b/dts/Bindings/usb/ti,hd3ss3220.yaml index b86bf6bc9c..54c6586cb5 100644 --- a/dts/Bindings/usb/ti,hd3ss3220.yaml +++ b/dts/Bindings/usb/ti,hd3ss3220.yaml @@ -46,13 +46,12 @@ properties: required: - compatible - reg - - interrupts additionalProperties: false examples: - | - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/dts/Bindings/usb/ti,j721e-usb.yaml b/dts/Bindings/usb/ti,j721e-usb.yaml index a634774c53..95ff9791ba 100644 --- a/dts/Bindings/usb/ti,j721e-usb.yaml +++ b/dts/Bindings/usb/ti,j721e-usb.yaml @@ -1,13 +1,13 @@ # SPDX-License-Identifier: GPL-2.0 %YAML 1.2 --- -$id: "http://devicetree.org/schemas/usb/ti,j721e-usb.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/usb/ti,j721e-usb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# -title: Bindings for the TI wrapper module for the Cadence USBSS-DRD controller +title: TI wrapper module for the Cadence USBSS-DRD controller maintainers: - - Roger Quadros <rogerq@ti.com> + - Roger Quadros <rogerq@kernel.org> properties: compatible: @@ -53,12 +53,6 @@ properties: VBUS pin of the SoC via a 1/3 voltage divider. type: boolean - assigned-clocks: - maxItems: 1 - - assigned-clock-parents: - maxItems: 1 - '#address-cells': const: 2 diff --git a/dts/Bindings/usb/ti,keystone-dwc3.yaml b/dts/Bindings/usb/ti,keystone-dwc3.yaml index f6e91a5fd8..9252d893f6 100644 --- a/dts/Bindings/usb/ti,keystone-dwc3.yaml +++ b/dts/Bindings/usb/ti,keystone-dwc3.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: TI Keystone Soc USB Controller maintainers: - - Roger Quadros <rogerq@ti.com> + - Roger Quadros <rogerq@kernel.org> properties: compatible: @@ -34,14 +34,6 @@ properties: minItems: 1 maxItems: 2 - assigned-clocks: - minItems: 1 - maxItems: 2 - - assigned-clock-parents: - minItems: 1 - maxItems: 2 - power-domains: maxItems: 1 description: Should contain a phandle to a PM domain provider node @@ -92,7 +84,7 @@ examples: ranges; usb@2690000 { - compatible = "synopsys,dwc3"; + compatible = "snps,dwc3"; reg = <0x2690000 0x70000>; interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>; usb-phy = <&usb_phy>, <&usb_phy>; diff --git a/dts/Bindings/usb/ti,tps6598x.yaml b/dts/Bindings/usb/ti,tps6598x.yaml index a4c53b1f1a..1745e28b31 100644 --- a/dts/Bindings/usb/ti,tps6598x.yaml +++ b/dts/Bindings/usb/ti,tps6598x.yaml @@ -1,10 +1,10 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/usb/ti,tps6598x.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/usb/ti,tps6598x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# -title: Texas Instruments 6598x Type-C Port Switch and Power Delivery controller DT bindings +title: Texas Instruments 6598x Type-C Port Switch and Power Delivery controller maintainers: - Bryan O'Donoghue <bryan.odonoghue@linaro.org> @@ -20,9 +20,30 @@ properties: enum: - ti,tps6598x - apple,cd321x + - ti,tps25750 + reg: + minItems: 1 + items: + - description: main PD controller address + - description: | + I2C slave address field in PBMs input data + which is used as the device address when writing the + patch for TPS25750. + The patch address can be any value except 0x00, 0x20, + 0x21, 0x22, and 0x23 + + reg-names: + items: + - const: main + - const: patch-address + + reset-gpios: + description: GPIO used for the HRESET pin. maxItems: 1 + wakeup-source: true + interrupts: maxItems: 1 @@ -30,24 +51,59 @@ properties: items: - const: irq + connector: + $ref: /schemas/connector/usb-connector.yaml# + + firmware-name: + description: | + Should contain the name of the default patch binary + file located on the firmware search path which is + used to switch the controller into APP mode. + This is used when tps25750 doesn't have an EEPROM + connected to it. + maxItems: 1 + required: - compatible - reg - - interrupts - - interrupt-names -additionalProperties: true +allOf: + - if: + properties: + compatible: + contains: + const: ti,tps25750 + then: + properties: + reg: + maxItems: 2 + + connector: + required: + - data-role + + required: + - connector + - reg-names + else: + properties: + reg: + maxItems: 1 + +additionalProperties: false examples: - | + #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; tps6598x: tps6598x@38 { compatible = "ti,tps6598x"; reg = <0x38>; + wakeup-source; interrupt-parent = <&msmgpio>; interrupts = <107 IRQ_TYPE_LEVEL_LOW>; @@ -55,6 +111,7 @@ examples: pinctrl-names = "default"; pinctrl-0 = <&typec_pins>; + reset-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; typec_con: connector { compatible = "usb-c-connector"; @@ -67,4 +124,36 @@ examples: }; }; }; + + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + typec@21 { + compatible = "ti,tps25750"; + reg = <0x21>, <0x0f>; + reg-names = "main", "patch-address"; + + interrupt-parent = <&msmgpio>; + interrupts = <100 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "irq"; + firmware-name = "tps25750.bin"; + + pinctrl-names = "default"; + pinctrl-0 = <&typec_pins>; + + typec_con0: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + port { + typec_ep0: endpoint { + remote-endpoint = <&otg_ep>; + }; + }; + }; + }; + }; ... diff --git a/dts/Bindings/usb/ti,usb8041.yaml b/dts/Bindings/usb/ti,usb8041.yaml new file mode 100644 index 0000000000..c2e29bd61e --- /dev/null +++ b/dts/Bindings/usb/ti,usb8041.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/ti,usb8041.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI USB8041 USB 3.0 hub controller + +maintainers: + - Alexander Stein <alexander.stein@ew.tq-group.com> + +allOf: + - $ref: usb-device.yaml# + +properties: + compatible: + enum: + - usb451,8140 + - usb451,8142 + + reg: true + + reset-gpios: + items: + - description: GPIO specifier for GRST# pin. + + vdd-supply: + description: + VDD power supply to the hub + + peer-hub: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to the peer hub on the controller. + +required: + - compatible + - reg + - peer-hub + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + usb { + dr_mode = "host"; + #address-cells = <1>; + #size-cells = <0>; + + /* 2.0 hub on port 1 */ + hub_2_0: hub@1 { + compatible = "usb451,8142"; + reg = <1>; + peer-hub = <&hub_3_0>; + reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + }; + + /* 3.0 hub on port 2 */ + hub_3_0: hub@2 { + compatible = "usb451,8140"; + reg = <2>; + peer-hub = <&hub_2_0>; + reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + }; + }; diff --git a/dts/Bindings/usb/typec-tcpci.txt b/dts/Bindings/usb/typec-tcpci.txt deleted file mode 100644 index 2082522b1c..0000000000 --- a/dts/Bindings/usb/typec-tcpci.txt +++ /dev/null @@ -1,49 +0,0 @@ -TCPCI(Typec port cotroller interface) binding ---------------------------------------------- - -Required properties: -- compatible: should be set one of following: - - "nxp,ptn5110" for NXP USB PD TCPC PHY IC ptn5110. - -- reg: the i2c slave address of typec port controller device. -- interrupt-parent: the phandle to the interrupt controller which provides - the interrupt. -- interrupts: interrupt specification for tcpci alert. - -Required sub-node: -- connector: The "usb-c-connector" attached to the tcpci chip, the bindings - of connector node are specified in - Documentation/devicetree/bindings/connector/usb-connector.yaml - -Example: - -ptn5110@50 { - compatible = "nxp,ptn5110"; - reg = <0x50>; - interrupt-parent = <&gpio3>; - interrupts = <3 IRQ_TYPE_LEVEL_LOW>; - - usb_con: connector { - compatible = "usb-c-connector"; - label = "USB-C"; - data-role = "dual"; - power-role = "dual"; - try-power-role = "sink"; - source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>; - sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM) - PDO_VAR(5000, 12000, 2000)>; - op-sink-microwatt = <10000000>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - reg = <1>; - usb_con_ss: endpoint { - remote-endpoint = <&usb3_data_ss>; - }; - }; - }; - }; -}; diff --git a/dts/Bindings/usb/usb-device.yaml b/dts/Bindings/usb/usb-device.yaml index b77960a7a3..da890ee60c 100644 --- a/dts/Bindings/usb/usb-device.yaml +++ b/dts/Bindings/usb/usb-device.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/usb/usb-device.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: The device tree bindings for the Generic USB Device +title: Generic USB Device maintainers: - Greg Kroah-Hartman <gregkh@linuxfoundation.org> @@ -76,7 +76,6 @@ patternProperties: maxItems: 1 required: - - compatible - reg additionalProperties: true diff --git a/dts/Bindings/usb/usb-drd.yaml b/dts/Bindings/usb/usb-drd.yaml index f229fc8068..114fb5dc04 100644 --- a/dts/Bindings/usb/usb-drd.yaml +++ b/dts/Bindings/usb/usb-drd.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/usb/usb-drd.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Generic USB OTG Controller Device Tree Bindings +title: Generic USB OTG Controller maintainers: - Greg Kroah-Hartman <gregkh@linuxfoundation.org> @@ -27,6 +27,7 @@ properties: should default to OTG. $ref: /schemas/types.yaml#/definitions/string enum: [host, peripheral, otg] + default: otg hnp-disable: description: diff --git a/dts/Bindings/usb/usb-hcd.yaml b/dts/Bindings/usb/usb-hcd.yaml index 56853c17af..45a19d4928 100644 --- a/dts/Bindings/usb/usb-hcd.yaml +++ b/dts/Bindings/usb/usb-hcd.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/usb/usb-hcd.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Generic USB Host Controller Device Tree Bindings +title: Generic USB Host Controller maintainers: - Greg Kroah-Hartman <gregkh@linuxfoundation.org> @@ -33,7 +33,7 @@ patternProperties: "^.*@[0-9a-f]{1,2}$": description: The hard wired USB devices type: object - $ref: /usb/usb-device.yaml + $ref: /schemas/usb/usb-device.yaml additionalProperties: true @@ -41,7 +41,7 @@ examples: - | usb { phys = <&usb2_phy1>, <&usb3_phy1>; - phy-names = "usb"; + phy-names = "usb2", "usb3"; #address-cells = <1>; #size-cells = <0>; diff --git a/dts/Bindings/usb/usb-nop-xceiv.yaml b/dts/Bindings/usb/usb-nop-xceiv.yaml index 2824c17285..6734f4d3aa 100644 --- a/dts/Bindings/usb/usb-nop-xceiv.yaml +++ b/dts/Bindings/usb/usb-nop-xceiv.yaml @@ -27,6 +27,9 @@ properties: vcc-supply: description: phandle to the regulator that provides power to the PHY. + power-domains: + maxItems: 1 + reset-gpios: maxItems: 1 @@ -35,10 +38,15 @@ properties: maxItems: 1 vbus-regulator: - description: Should specifiy the regulator supplying current drawn from + description: Should specify the regulator supplying current drawn from the VBus line. $ref: /schemas/types.yaml#/definitions/phandle + wakeup-source: + description: + Specify if the USB phy can detect the remote wakeup signal + while the system sleep. + required: - compatible - '#phy-cells' diff --git a/dts/Bindings/usb/usb-xhci.yaml b/dts/Bindings/usb/usb-xhci.yaml index 965f87fef7..4238ae896e 100644 --- a/dts/Bindings/usb/usb-xhci.yaml +++ b/dts/Bindings/usb/usb-xhci.yaml @@ -4,13 +4,13 @@ $id: http://devicetree.org/schemas/usb/usb-xhci.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Generic USB xHCI Controller Device Tree Bindings +title: Generic USB xHCI Controller maintainers: - Mathias Nyman <mathias.nyman@intel.com> allOf: - - $ref: "usb-hcd.yaml#" + - $ref: usb-hcd.yaml# properties: usb2-lpm-disable: @@ -29,6 +29,12 @@ properties: description: Interrupt moderation interval default: 5000 + num-hc-interrupters: + description: Maximum number of interrupters to allocate + $ref: /schemas/types.yaml#/definitions/uint16 + minimum: 1 + maximum: 1024 + additionalProperties: true examples: diff --git a/dts/Bindings/usb/usb.yaml b/dts/Bindings/usb/usb.yaml index 939f217b8c..326b14f05d 100644 --- a/dts/Bindings/usb/usb.yaml +++ b/dts/Bindings/usb/usb.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/usb/usb.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Generic USB Controller Device Tree Bindings +title: Generic USB Controller maintainers: - Greg Kroah-Hartman <gregkh@linuxfoundation.org> diff --git a/dts/Bindings/usb/usb251xb.txt b/dts/Bindings/usb/usb251xb.txt deleted file mode 100644 index 1a934eab17..0000000000 --- a/dts/Bindings/usb/usb251xb.txt +++ /dev/null @@ -1,89 +0,0 @@ -Microchip USB 2.0 Hi-Speed Hub Controller - -The device node for the configuration of a Microchip USB251x/xBi USB 2.0 -Hi-Speed Controller. - -Required properties : - - compatible : Should be "microchip,usb251xb" or one of the specific types: - "microchip,usb2512b", "microchip,usb2512bi", "microchip,usb2513b", - "microchip,usb2513bi", "microchip,usb2514b", "microchip,usb2514bi", - "microchip,usb2517", "microchip,usb2517i", "microchip,usb2422" - - reg : I2C address on the selected bus (default is <0x2C>) - -Optional properties : - - reset-gpios : Should specify the gpio for hub reset - - vdd-supply : Should specify the phandle to the regulator supplying vdd - - skip-config : Skip Hub configuration, but only send the USB-Attach command - - vendor-id : Set USB Vendor ID of the hub (16 bit, default is 0x0424) - - product-id : Set USB Product ID of the hub (16 bit, default depends on type) - - device-id : Set USB Device ID of the hub (16 bit, default is 0x0bb3) - - language-id : Set USB Language ID (16 bit, default is 0x0000) - - manufacturer : Set USB Manufacturer string (max 31 characters long) - - product : Set USB Product string (max 31 characters long) - - serial : Set USB Serial string (max 31 characters long) - - {bus,self}-powered : selects between self- and bus-powered operation - (boolean, default is self-powered) - - disable-hi-speed : disable USB Hi-Speed support (boolean) - - {multi,single}-tt : selects between multi- and single-transaction-translator - (boolean, default is multi-tt) - - disable-eop : disable End of Packet generation in full-speed mode (boolean) - - {ganged,individual}-sensing : select over-current sense type in self-powered - mode (boolean, default is individual) - - {ganged,individual}-port-switching : select port power switching mode - (boolean, default is individual) - - dynamic-power-switching : enable auto-switching from self- to bus-powered - operation if the local power source is removed or unavailable (boolean) - - oc-delay-us : Delay time (in microseconds) for filtering the over-current - sense inputs. Valid values are 100, 4000, 8000 (default) and 16000. If - an invalid value is given, the default is used instead. - - compound-device : indicate the hub is part of a compound device (boolean) - - port-mapping-mode : enable port mapping mode (boolean) - - led-{usb,speed}-mode : led usb/speed indication mode selection - (boolean, default is speed mode) - - string-support : enable string descriptor support (required for manufacturer, - product and serial string configuration) - - non-removable-ports : Should specify the ports which have a non-removable - device connected. - - sp-disabled-ports : Specifies the ports which will be self-power disabled - - bp-disabled-ports : Specifies the ports which will be bus-power disabled - - sp-max-total-current-microamp: Specifies max current consumed by the hub - from VBUS when operating in self-powered hub. It includes the hub - silicon along with all associated circuitry including a permanently - attached peripheral (range: 0 - 100000 uA, default 1000 uA) - - bp-max-total-current-microamp: Specifies max current consumed by the hub - from VBUS when operating in self-powered hub. It includes the hub - silicon along with all associated circuitry including a permanently - attached peripheral (range: 0 - 510000 uA, default 100000 uA) - - sp-max-removable-current-microamp: Specifies max current consumed by the hub - from VBUS when operating in self-powered hub. It includes the hub - silicon along with all associated circuitry excluding a permanently - attached peripheral (range: 0 - 100000 uA, default 1000 uA) - - bp-max-removable-current-microamp: Specifies max current consumed by the hub - from VBUS when operating in self-powered hub. It includes the hub - silicon along with all associated circuitry excluding a permanently - attached peripheral (range: 0 - 510000 uA, default 100000 uA) - - power-on-time-ms : Specifies the time it takes from the time the host - initiates the power-on sequence to a port until the port has adequate - power. The value is given in ms in a 0 - 510 range (default is 100ms). - - swap-dx-lanes : Specifies the ports which will swap the differential-pair - (D+/D-), default is not-swapped. - -Examples: - usb2512b@2c { - compatible = "microchip,usb2512b"; - reg = <0x2c>; - reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; - }; - - usb2514b@2c { - compatible = "microchip,usb2514b"; - reg = <0x2c>; - vendor-id = /bits/ 16 <0x0000>; - product-id = /bits/ 16 <0x0000>; - string-support; - manufacturer = "Foo"; - product = "Foo-Bar"; - serial = "1234567890A"; - /* correct misplaced usb connectors on port 1,2 */ - swap-dx-lanes = <1 2>; - }; diff --git a/dts/Bindings/usb/usb251xb.yaml b/dts/Bindings/usb/usb251xb.yaml new file mode 100644 index 0000000000..ac5b997103 --- /dev/null +++ b/dts/Bindings/usb/usb251xb.yaml @@ -0,0 +1,271 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/usb251xb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip USB 2.0 Hi-Speed Hub Controller + +maintainers: + - Richard Leitner <richard.leitner@skidata.com> + +properties: + compatible: + enum: + - microchip,usb2422 + - microchip,usb2512b + - microchip,usb2512bi + - microchip,usb2513b + - microchip,usb2513bi + - microchip,usb2514b + - microchip,usb2514bi + - microchip,usb2517 + - microchip,usb2517i + - microchip,usb251xb + + reg: + maxItems: 1 + + reset-gpios: + description: | + Should specify the gpio for hub reset + + vdd-supply: + description: | + Should specify the phandle to the regulator supplying vdd + + skip-config: + $ref: /schemas/types.yaml#/definitions/flag + description: | + Skip Hub configuration, but only send the USB-Attach command + + vendor-id: + $ref: /schemas/types.yaml#/definitions/uint16 + default: 0x0424 + description: | + Set USB Vendor ID of the hub + + product-id: + $ref: /schemas/types.yaml#/definitions/uint16 + description: | + Set USB Product ID of the hub + + device-id: + $ref: /schemas/types.yaml#/definitions/uint16 + default: 0x0bb3 + description: | + Set USB Device ID of the hub + + language-id: + $ref: /schemas/types.yaml#/definitions/uint16 + default: 0x0000 + description: | + Set USB Language ID + + manufacturer: + $ref: /schemas/types.yaml#/definitions/string + description: | + Set USB Manufacturer string (max 31 characters long) + + product: + $ref: /schemas/types.yaml#/definitions/string + description: | + Set USB Product string (max 31 characters long) + + serial: + $ref: /schemas/types.yaml#/definitions/string + description: | + Set USB Serial string (max 31 characters long) + + bus-powered: + $ref: /schemas/types.yaml#/definitions/flag + description: | + selects between self- and bus-powered operation + (boolean, default is self-powered) + + self-powered: + $ref: /schemas/types.yaml#/definitions/flag + description: | + selects between self- and bus-powered operation + (boolean, default is self-powered) + + disable-hi-speed: + $ref: /schemas/types.yaml#/definitions/flag + description: | + disable USB Hi-Speed support (boolean) + + multi-tt: + $ref: /schemas/types.yaml#/definitions/flag + description: | + selects between multi- and single-transaction-translator + (boolean, default is multi-tt) + + single-tt: + $ref: /schemas/types.yaml#/definitions/flag + description: | + selects between multi- and single-transaction-translator + (boolean, default is multi-tt) + + disable-eop: + $ref: /schemas/types.yaml#/definitions/flag + description: | + disable End of Packet generation in full-speed mode (boolean) + + ganged-sensing: + $ref: /schemas/types.yaml#/definitions/flag + description: | + select over-current sense type in self-powered mode + (boolean, default is individual) + + individual-sensing: + $ref: /schemas/types.yaml#/definitions/flag + description: | + select over-current sense type in self-powered mode + (boolean, default is individual) + + ganged-port-switching: + $ref: /schemas/types.yaml#/definitions/flag + description: | + select port power switching mode (boolean, default is individual) + + individual-port-switching: + $ref: /schemas/types.yaml#/definitions/flag + description: | + select port power switching mode (boolean, default is individual) + + dynamic-power-switching: + $ref: /schemas/types.yaml#/definitions/flag + description: | + enable auto-switching from self- to bus-powered operation if the + local power source is removed or unavailable (boolean) + + oc-delay-us: + enum: [100, 4000, 8000, 16000] + default: 8000 + description: | + Delay time (in microseconds) for filtering the over-current sense + inputs. If an invalid value is given, the default is used instead. + + compound-device: + $ref: /schemas/types.yaml#/definitions/flag + description: | + indicate the hub is part of a compound device (boolean) + + port-mapping-mode: + $ref: /schemas/types.yaml#/definitions/flag + description: | + enable port mapping mode (boolean) + + led-usb-mode: + $ref: /schemas/types.yaml#/definitions/flag + description: | + led usb/speed indication mode selection (boolean, default is speed mode) + + led-speed-mode: + $ref: /schemas/types.yaml#/definitions/flag + description: | + led usb/speed indication mode selection (boolean, default is speed mode) + + string-support: + $ref: /schemas/types.yaml#/definitions/flag + description: | + enable string descriptor support (required for manufacturer, product + and serial string configuration) + + non-removable-ports: + $ref: /schemas/types.yaml#/definitions/uint8-array + description: | + Should specify the ports which have a non-removable device connected. + + sp-disabled-ports: + $ref: /schemas/types.yaml#/definitions/uint8-array + description: | + Specifies the ports which will be self-power disabled + + bp-disabled-ports: + $ref: /schemas/types.yaml#/definitions/uint8-array + description: | + Specifies the ports which will be bus-power disabled + + sp-max-total-current-microamp: + maximum: 100000 + default: 1000 + description: | + Specifies max current consumed by the hub from VBUS when + operating in self-powered hub. It includes the hub silicon + along with all associated circuitry including a permanently + attached peripheral. + + bp-max-total-current-microamp: + maximum: 510000 + default: 100000 + description: | + Specifies max current consumed by the hub from VBUS when + operating in self-powered hub. It includes the hub silicon + along with all associated circuitry including a permanently + attached peripheral. + + sp-max-removable-current-microamp: + maximum: 100000 + default: 1000 + description: | + Specifies max current consumed by the hub from VBUS when + operating in self-powered hub. It includes the hub silicon + along with all associated circuitry excluding a permanently + attached peripheral. + + bp-max-removable-current-microamp: + maximum: 510000 + default: 100000 + description: | + Specifies max current consumed by the hub from VBUS when + operating in self-powered hub. It includes the hub silicon + along with all associated circuitry excluding a permanently + attached peripheral. + + power-on-time-ms: + maximum: 510 + default: 100 + description: | + Specifies the time it takes from the time the host initiates the + power-on sequence to a port until the port has adequate power. + + swap-dx-lanes: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: | + Specifies the ports which will swap the differential-pair (D+/D-), + default is not-swapped. + +additionalProperties: false + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + usb-hub@2c { + compatible = "microchip,usb2512b"; + reg = <0x2c>; + reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + }; + + usb-hub@2d { + compatible = "microchip,usb2514b"; + reg = <0x2d>; + vendor-id = /bits/ 16 <0x0000>; + product-id = /bits/ 16 <0x0000>; + string-support; + manufacturer = "Foo"; + product = "Foo-Bar"; + serial = "1234567890A"; + /* correct misplaced usb connectors on port 1,2 */ + swap-dx-lanes = <1 2>; + }; + }; diff --git a/dts/Bindings/usb/usbmisc-imx.txt b/dts/Bindings/usb/usbmisc-imx.txt deleted file mode 100644 index b796836d2c..0000000000 --- a/dts/Bindings/usb/usbmisc-imx.txt +++ /dev/null @@ -1,18 +0,0 @@ -* Freescale i.MX non-core registers - -Required properties: -- #index-cells: Cells used to describe usb controller index. Should be <1> -- compatible: Should be one of below: - "fsl,imx6q-usbmisc" for imx6q - "fsl,vf610-usbmisc" for Vybrid vf610 - "fsl,imx6sx-usbmisc" for imx6sx - "fsl,imx7d-usbmisc" for imx7d - "fsl,imx7ulp-usbmisc" for imx7ulp -- reg: Should contain registers location and length - -Examples: -usbmisc@2184800 { - #index-cells = <1>; - compatible = "fsl,imx6q-usbmisc"; - reg = <0x02184800 0x200>; -}; diff --git a/dts/Bindings/usb/vialab,vl817.yaml b/dts/Bindings/usb/vialab,vl817.yaml new file mode 100644 index 0000000000..c815010ba9 --- /dev/null +++ b/dts/Bindings/usb/vialab,vl817.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/vialab,vl817.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Via labs VL817 USB 3.1 hub controller + +maintainers: + - Anand Moon <linux.amoon@gmail.com> + +allOf: + - $ref: usb-device.yaml# + +properties: + compatible: + enum: + - usb2109,2817 + - usb2109,817 + + reg: true + + reset-gpios: + maxItems: 1 + description: + GPIO controlling the RESET# pin. + + vdd-supply: + description: + phandle to the regulator that provides power to the hub. + + peer-hub: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to the peer hub on the controller. + +required: + - compatible + - reg + - vdd-supply + - peer-hub + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + usb { + #address-cells = <1>; + #size-cells = <0>; + + /* 2.0 hub on port 1 */ + hub_2_0: hub@1 { + compatible = "usb2109,2817"; + reg = <1>; + vdd-supply = <&vcc_5v>; + peer-hub = <&hub_3_0>; + reset-gpios = <&gpio 20 GPIO_ACTIVE_LOW>; + }; + + /* 3.1 hub on port 4 */ + hub_3_0: hub@2 { + compatible = "usb2109,817"; + reg = <2>; + vdd-supply = <&vcc_5v>; + peer-hub = <&hub_2_0>; + reset-gpios = <&gpio 20 GPIO_ACTIVE_LOW>; + }; + }; diff --git a/dts/Bindings/usb/willsemi,wusb3801.yaml b/dts/Bindings/usb/willsemi,wusb3801.yaml new file mode 100644 index 0000000000..937670de01 --- /dev/null +++ b/dts/Bindings/usb/willsemi,wusb3801.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/willsemi,wusb3801.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: WUSB3801 Type-C port controller + +description: + The Will Semiconductor WUSB3801 is a USB Type-C port controller which + supports role and plug orientation detection using the CC pins. It is + compatible with the USB Type-C Cable and Connector Specification v1.2. + +maintainers: + - Samuel Holland <samuel@sholland.org> + +properties: + compatible: + enum: + - willsemi,wusb3801 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + connector: + type: object + $ref: ../connector/usb-connector.yaml# + unevaluatedProperties: false + description: + The managed USB Type-C connector. Since WUSB3801 does not support + Power Delivery, the node should have the "pd-disable" property. + + properties: + compatible: + const: usb-c-connector + + required: + - pd-disable + +required: + - compatible + - reg + - interrupts + - connector + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + tcpc@60 { + compatible = "willsemi,wusb3801"; + reg = <0x60>; + interrupt-parent = <&gpio0>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + vbus-supply = <&otg_switch>; + power-role = "dual"; + try-power-role = "sink"; + data-role = "dual"; + typec-power-opmode = "default"; + pd-disable; + }; + }; + }; diff --git a/dts/Bindings/usb/xlnx,usb2.yaml b/dts/Bindings/usb/xlnx,usb2.yaml index 04c123c725..a7f75fe366 100644 --- a/dts/Bindings/usb/xlnx,usb2.yaml +++ b/dts/Bindings/usb/xlnx,usb2.yaml @@ -7,7 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Xilinx udc controller maintainers: - - Manish Narani <manish.narani@xilinx.com> + - Mubin Sayyed <mubin.sayyed@amd.com> + - Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> properties: compatible: |