diff options
Diffstat (limited to 'dts/src/arm64/broadcom/bcm4908/bcm4908.dtsi')
-rw-r--r-- | dts/src/arm64/broadcom/bcm4908/bcm4908.dtsi | 490 |
1 files changed, 0 insertions, 490 deletions
diff --git a/dts/src/arm64/broadcom/bcm4908/bcm4908.dtsi b/dts/src/arm64/broadcom/bcm4908/bcm4908.dtsi deleted file mode 100644 index a4be040a00..0000000000 --- a/dts/src/arm64/broadcom/bcm4908/bcm4908.dtsi +++ /dev/null @@ -1,490 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/phy/phy.h> -#include <dt-bindings/soc/bcm-pmb.h> - -/dts-v1/; - -/ { - interrupt-parent = <&gic>; - - #address-cells = <2>; - #size-cells = <2>; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "brcm,brahma-b53"; - reg = <0x0>; - next-level-cache = <&l2>; - }; - - cpu1: cpu@1 { - device_type = "cpu"; - compatible = "brcm,brahma-b53"; - reg = <0x1>; - enable-method = "spin-table"; - cpu-release-addr = <0x0 0xfff8>; - next-level-cache = <&l2>; - }; - - cpu2: cpu@2 { - device_type = "cpu"; - compatible = "brcm,brahma-b53"; - reg = <0x2>; - enable-method = "spin-table"; - cpu-release-addr = <0x0 0xfff8>; - next-level-cache = <&l2>; - }; - - cpu3: cpu@3 { - device_type = "cpu"; - compatible = "brcm,brahma-b53"; - reg = <0x3>; - enable-method = "spin-table"; - cpu-release-addr = <0x0 0xfff8>; - next-level-cache = <&l2>; - }; - - l2: l2-cache0 { - compatible = "cache"; - }; - }; - - axi@81000000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x00 0x00 0x81000000 0x4000>; - - gic: interrupt-controller@1000 { - compatible = "arm,gic-400"; - #interrupt-cells = <3>; - #address-cells = <0>; - interrupt-controller; - reg = <0x1000 0x1000>, - <0x2000 0x2000>; - }; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; - }; - - pmu { - compatible = "arm,cortex-a53-pmu"; - interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; - }; - - clocks { - periph_clk: periph_clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <50000000>; - clock-output-names = "periph"; - }; - }; - - soc { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x00 0x00 0x80000000 0x281000>; - - enet: ethernet@2000 { - compatible = "brcm,bcm4908-enet"; - reg = <0x2000 0x1000>; - - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "rx", "tx"; - }; - - usb_phy: usb-phy@c200 { - compatible = "brcm,bcm4908-usb-phy"; - reg = <0xc200 0x100>; - reg-names = "ctrl"; - power-domains = <&pmb BCM_PMB_HOST_USB>; - dr_mode = "host"; - brcm,has-xhci; - brcm,has-eohci; - #phy-cells = <1>; - status = "disabled"; - }; - - ehci: usb@c300 { - compatible = "generic-ehci"; - reg = <0xc300 0x100>; - interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; - phys = <&usb_phy PHY_TYPE_USB2>; - status = "disabled"; - }; - - ohci: usb@c400 { - compatible = "generic-ohci"; - reg = <0xc400 0x100>; - interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; - phys = <&usb_phy PHY_TYPE_USB2>; - status = "disabled"; - }; - - xhci: usb@d000 { - compatible = "generic-xhci"; - reg = <0xd000 0x8c8>; - interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; - phys = <&usb_phy PHY_TYPE_USB3>; - status = "disabled"; - }; - - bus@80000 { - compatible = "simple-bus"; - #size-cells = <1>; - #address-cells = <1>; - ranges = <0 0x80000 0x50000>; - - ethernet-switch@0 { - compatible = "brcm,bcm4908-switch"; - reg = <0x0 0x40000>, - <0x40000 0x110>, - <0x40340 0x30>, - <0x40380 0x30>, - <0x40600 0x34>, - <0x40800 0x208>; - reg-names = "core", "reg", "intrl2_0", - "intrl2_1", "fcb", "acb"; - interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; - brcm,num-gphy = <5>; - brcm,num-rgmii-ports = <2>; - - #address-cells = <1>; - #size-cells = <0>; - - ports: ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - phy-mode = "internal"; - phy-handle = <&phy8>; - }; - - port@1 { - reg = <1>; - phy-mode = "internal"; - phy-handle = <&phy9>; - }; - - port@2 { - reg = <2>; - phy-mode = "internal"; - phy-handle = <&phy10>; - }; - - port@3 { - reg = <3>; - phy-mode = "internal"; - phy-handle = <&phy11>; - }; - - port@8 { - reg = <8>; - phy-mode = "internal"; - ethernet = <&enet>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - }; - - mdio: mdio@405c0 { - compatible = "brcm,unimac-mdio"; - reg = <0x405c0 0x8>; - reg-names = "mdio"; - #size-cells = <0>; - #address-cells = <1>; - - phy8: ethernet-phy@8 { - reg = <8>; - }; - - phy9: ethernet-phy@9 { - reg = <9>; - }; - - phy10: ethernet-phy@a { - reg = <10>; - }; - - phy11: ethernet-phy@b { - reg = <11>; - }; - - phy12: ethernet-phy@c { - reg = <12>; - }; - }; - }; - - procmon: syscon@280000 { - compatible = "simple-bus"; - reg = <0x280000 0x1000>; - ranges; - - #address-cells = <1>; - #size-cells = <1>; - - pmb: power-controller@2800c0 { - compatible = "brcm,bcm4908-pmb"; - reg = <0x2800c0 0x40>; - #power-domain-cells = <1>; - }; - }; - }; - - bus@ff800000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x00 0x00 0xff800000 0x3000>; - - twd: timer-mfd@400 { - compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon"; - reg = <0x400 0x4c>; - ranges = <0x0 0x400 0x4c>; - - #address-cells = <1>; - #size-cells = <1>; - - watchdog@28 { - compatible = "brcm,bcm6345-wdt"; - reg = <0x28 0x8>; - }; - }; - - gpio0: gpio-controller@500 { - compatible = "brcm,bcm6345-gpio"; - reg-names = "dirout", "dat"; - reg = <0x500 0x28>, <0x528 0x28>; - - #gpio-cells = <2>; - gpio-controller; - }; - - pinctrl@560 { - compatible = "brcm,bcm4908-pinctrl"; - reg = <0x560 0x10>; - - pins_led_0_a: led_0-a-pins { - function = "led_0"; - groups = "led_0_grp_a"; - }; - - pins_led_1_a: led_1-a-pins { - function = "led_1"; - groups = "led_1_grp_a"; - }; - - pins_led_2_a: led_2-a-pins { - function = "led_2"; - groups = "led_2_grp_a"; - }; - - pins_led_3_a: led_3-a-pins { - function = "led_3"; - groups = "led_3_grp_a"; - }; - - pins_led_4_a: led_4-a-pins { - function = "led_4"; - groups = "led_4_grp_a"; - }; - - pins_led_5_a: led_5-a-pins { - function = "led_5"; - groups = "led_5_grp_a"; - }; - - pins_led_6_a: led_6-a-pins { - function = "led_6"; - groups = "led_6_grp_a"; - }; - - pins_led_7_a: led_7-a-pins { - function = "led_7"; - groups = "led_7_grp_a"; - }; - - pins_led_8_a: led_8-a-pins { - function = "led_8"; - groups = "led_8_grp_a"; - }; - - pins_led_9_a: led_9-a-pins { - function = "led_9"; - groups = "led_9_grp_a"; - }; - - pins_led_21_a: led_21-a-pins { - function = "led_21"; - groups = "led_21_grp_a"; - }; - - pins_led_22_a: led_22-a-pins { - function = "led_22"; - groups = "led_22_grp_a"; - }; - - pins_led_26_a: led_26-a-pins { - function = "led_26"; - groups = "led_26_grp_a"; - }; - - pins_led_27_a: led_27-a-pins { - function = "led_27"; - groups = "led_27_grp_a"; - }; - - pins_led_28_a: led_28-a-pins { - function = "led_28"; - groups = "led_28_grp_a"; - }; - - pins_led_29_a: led_29-a-pins { - function = "led_29"; - groups = "led_29_grp_a"; - }; - - pins_led_30_a: led_30-a-pins { - function = "led_30"; - groups = "led_30_grp_a"; - }; - - pins_hs_uart: hs_uart-pins { - function = "hs_uart"; - groups = "hs_uart_grp"; - }; - - pins_i2c_a: i2c-a-pins { - function = "i2c"; - groups = "i2c_grp_a"; - }; - - pins_i2c_b: i2c-b-pins { - function = "i2c"; - groups = "i2c_grp_b"; - }; - - pins_i2s: i2s-pins { - function = "i2s"; - groups = "i2s_grp"; - }; - - pins_nand_ctrl: nand_ctrl-pins { - function = "nand_ctrl"; - groups = "nand_ctrl_grp"; - }; - - pins_nand_data: nand_data-pins { - function = "nand_data"; - groups = "nand_data_grp"; - }; - - pins_emmc_ctrl: emmc_ctrl-pins { - function = "emmc_ctrl"; - groups = "emmc_ctrl_grp"; - }; - - pins_usb0_pwr: usb0_pwr-pins { - function = "usb0_pwr"; - groups = "usb0_pwr_grp"; - }; - - pins_usb1_pwr: usb1_pwr-pins { - function = "usb1_pwr"; - groups = "usb1_pwr_grp"; - }; - }; - - uart0: serial@640 { - compatible = "brcm,bcm6345-uart"; - reg = <0x640 0x18>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&periph_clk>; - clock-names = "refclk"; - status = "okay"; - }; - - nand-controller@1800 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand"; - reg = <0x1800 0x600>, <0x2000 0x10>; - reg-names = "nand", "nand-int-base"; - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "nand"; - status = "okay"; - - nandcs: nand@0 { - compatible = "brcm,nandcs"; - reg = <0>; - }; - }; - - i2c@2100 { - compatible = "brcm,brcmper-i2c"; - reg = <0x2100 0x58>; - clock-frequency = <97500>; - pinctrl-names = "default"; - pinctrl-0 = <&pins_i2c_a>; - status = "disabled"; - }; - - misc@2600 { - compatible = "brcm,misc", "simple-mfd"; - reg = <0x2600 0xe4>; - - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x00 0x2600 0xe4>; - - reset-controller@2644 { - compatible = "brcm,bcm4908-misc-pcie-reset"; - reg = <0x44 0x04>; - #reset-cells = <1>; - }; - }; - }; - - reboot { - compatible = "syscon-reboot"; - regmap = <&twd>; - offset = <0x34>; - mask = <1>; - }; -}; |