diff options
Diffstat (limited to 'dts/src/arm64/freescale/imx8mm.dtsi')
| -rw-r--r-- | dts/src/arm64/freescale/imx8mm.dtsi | 74 |
1 files changed, 68 insertions, 6 deletions
diff --git a/dts/src/arm64/freescale/imx8mm.dtsi b/dts/src/arm64/freescale/imx8mm.dtsi index 1e5e11592f..cc7152eced 100644 --- a/dts/src/arm64/freescale/imx8mm.dtsi +++ b/dts/src/arm64/freescale/imx8mm.dtsi @@ -68,6 +68,7 @@ nvmem-cells = <&cpu_speed_grade>; nvmem-cell-names = "speed_grade"; cpu-idle-states = <&cpu_pd_wait>; + #cooling-cells = <2>; }; A53_1: cpu@1 { @@ -80,6 +81,7 @@ next-level-cache = <&A53_L2>; operating-points-v2 = <&a53_opp_table>; cpu-idle-states = <&cpu_pd_wait>; + #cooling-cells = <2>; }; A53_2: cpu@2 { @@ -92,6 +94,7 @@ next-level-cache = <&A53_L2>; operating-points-v2 = <&a53_opp_table>; cpu-idle-states = <&cpu_pd_wait>; + #cooling-cells = <2>; }; A53_3: cpu@3 { @@ -104,6 +107,7 @@ next-level-cache = <&A53_L2>; operating-points-v2 = <&a53_opp_table>; cpu-idle-states = <&cpu_pd_wait>; + #cooling-cells = <2>; }; A53_L2: l2-cache0 { @@ -204,6 +208,38 @@ arm,no-tick-in-suspend; }; + thermal-zones { + cpu-thermal { + polling-delay-passive = <250>; + polling-delay = <2000>; + thermal-sensors = <&tmu>; + trips { + cpu_alert0: trip0 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit0: trip1 { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = + <&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + usbphynop1: usbphynop1 { compatible = "usb-nop-xceiv"; clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; @@ -227,7 +263,8 @@ ranges = <0x0 0x0 0x0 0x3e000000>; aips1: bus@30000000 { - compatible = "simple-bus"; + compatible = "fsl,aips-bus", "simple-bus"; + reg = <0x301f0000 0x10000>; #address-cells = <1>; #size-cells = <1>; ranges = <0x30000000 0x30000000 0x400000>; @@ -363,6 +400,13 @@ gpio-ranges = <&iomuxc 0 119 30>; }; + tmu: tmu@30260000 { + compatible = "fsl,imx8mm-tmu"; + reg = <0x30260000 0x10000>; + clocks = <&clk IMX8MM_CLK_TMU_ROOT>; + #thermal-sensor-cells = <0>; + }; + wdog1: watchdog@30280000 { compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt"; reg = <0x30280000 0x10000>; @@ -455,6 +499,8 @@ compatible = "fsl,sec-v4.0-pwrkey"; regmap = <&snvs>; interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SNVS_ROOT>; + clock-names = "snvs-pwrkey"; linux,keycode = <KEY_POWER>; wakeup-source; status = "disabled"; @@ -496,7 +542,8 @@ }; aips2: bus@30400000 { - compatible = "simple-bus"; + compatible = "fsl,aips-bus", "simple-bus"; + reg = <0x305f0000 0x10000>; #address-cells = <1>; #size-cells = <1>; ranges = <0x30400000 0x30400000 0x400000>; @@ -555,10 +602,12 @@ }; aips3: bus@30800000 { - compatible = "simple-bus"; + compatible = "fsl,aips-bus", "simple-bus"; + reg = <0x309f0000 0x10000>; #address-cells = <1>; #size-cells = <1>; - ranges = <0x30800000 0x30800000 0x400000>; + ranges = <0x30800000 0x30800000 0x400000>, + <0x8000000 0x8000000 0x10000000>; ecspi1: spi@30820000 { compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi"; @@ -760,6 +809,19 @@ status = "disabled"; }; + flexspi: spi@30bb0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "nxp,imx8mm-fspi"; + reg = <0x30bb0000 0x10000>, <0x8000000 0x10000000>; + reg-names = "fspi_base", "fspi_mmap"; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_QSPI_ROOT>, + <&clk IMX8MM_CLK_QSPI_ROOT>; + clock-names = "fspi", "fspi_en"; + status = "disabled"; + }; + sdma1: dma-controller@30bd0000 { compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma"; reg = <0x30bd0000 0x10000>; @@ -800,7 +862,8 @@ }; aips4: bus@32c00000 { - compatible = "simple-bus"; + compatible = "fsl,aips-bus", "simple-bus"; + reg = <0x32df0000 0x10000>; #address-cells = <1>; #size-cells = <1>; ranges = <0x32c00000 0x32c00000 0x400000>; @@ -896,7 +959,6 @@ ddr-pmu@3d800000 { compatible = "fsl,imx8mm-ddr-pmu", "fsl,imx8m-ddr-pmu"; reg = <0x3d800000 0x400000>; - interrupt-parent = <&gic>; interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; }; }; |