diff options
Diffstat (limited to 'dts/src/arm64/freescale')
20 files changed, 2722 insertions, 13 deletions
diff --git a/dts/src/arm64/freescale/fsl-ls1012a-oxalis.dts b/dts/src/arm64/freescale/fsl-ls1012a-oxalis.dts index 7c726267ec..9927b096d3 100644 --- a/dts/src/arm64/freescale/fsl-ls1012a-oxalis.dts +++ b/dts/src/arm64/freescale/fsl-ls1012a-oxalis.dts @@ -87,6 +87,10 @@ status = "okay"; }; +&pcie { + status = "okay"; +}; + &sai2 { status = "okay"; }; diff --git a/dts/src/arm64/freescale/fsl-ls1012a.dtsi b/dts/src/arm64/freescale/fsl-ls1012a.dtsi index 1ce0042b2a..ec6257a5b2 100644 --- a/dts/src/arm64/freescale/fsl-ls1012a.dtsi +++ b/dts/src/arm64/freescale/fsl-ls1012a.dtsi @@ -475,7 +475,7 @@ interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>; }; - pcie@3400000 { + pcie: pcie@3400000 { compatible = "fsl,ls1012a-pcie"; reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ 0x40 0x00000000 0x0 0x00002000>; /* configuration space */ diff --git a/dts/src/arm64/freescale/fsl-ls1028a-qds.dts b/dts/src/arm64/freescale/fsl-ls1028a-qds.dts index 14c79f4691..b359068d96 100644 --- a/dts/src/arm64/freescale/fsl-ls1028a-qds.dts +++ b/dts/src/arm64/freescale/fsl-ls1028a-qds.dts @@ -32,6 +32,49 @@ device_type = "memory"; reg = <0x0 0x80000000 0x1 0x00000000>; }; + + sys_mclk: clock-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack", + "Speaker", "Speaker Ext", + "Line", "Line In Jack"; + simple-audio-card,routing = + "MIC_IN", "Microphone Jack", + "Microphone Jack", "Mic Bias", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT", + "Speaker Ext", "LINE_OUT"; + + simple-audio-card,cpu { + sound-dai = <&sai1>; + frame-master; + bitclock-master; + }; + + simple-audio-card,codec { + sound-dai = <&sgtl5000>; + frame-master; + bitclock-master; + system-clock-frequency = <25000000>; + }; + }; }; &duart0 { @@ -89,5 +132,24 @@ reg = <0x57>; }; }; + + i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x5>; + + sgtl5000: audio-codec@a { + #sound-dai-cells = <0>; + compatible = "fsl,sgtl5000"; + reg = <0xa>; + VDDA-supply = <®_1p8v>; + VDDIO-supply = <®_1p8v>; + clocks = <&sys_mclk>; + }; + }; }; }; + +&sai1 { + status = "okay"; +}; diff --git a/dts/src/arm64/freescale/fsl-ls1028a-rdb.dts b/dts/src/arm64/freescale/fsl-ls1028a-rdb.dts index f86b054a74..f9c272fb07 100644 --- a/dts/src/arm64/freescale/fsl-ls1028a-rdb.dts +++ b/dts/src/arm64/freescale/fsl-ls1028a-rdb.dts @@ -28,6 +28,49 @@ device_type = "memory"; reg = <0x0 0x80000000 0x1 0x0000000>; }; + + sys_mclk: clock-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack", + "Speaker", "Speaker Ext", + "Line", "Line In Jack"; + simple-audio-card,routing = + "MIC_IN", "Microphone Jack", + "Microphone Jack", "Mic Bias", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT", + "Speaker Ext", "LINE_OUT"; + + simple-audio-card,cpu { + sound-dai = <&sai4>; + frame-master; + bitclock-master; + }; + + simple-audio-card,codec { + sound-dai = <&sgtl5000>; + frame-master; + bitclock-master; + system-clock-frequency = <25000000>; + }; + }; }; &i2c0 { @@ -39,6 +82,22 @@ #address-cells = <1>; #size-cells = <0>; + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; + + sgtl5000: audio-codec@a { + #sound-dai-cells = <0>; + compatible = "fsl,sgtl5000"; + reg = <0xa>; + VDDA-supply = <®_1p8v>; + VDDIO-supply = <®_1p8v>; + clocks = <&sys_mclk>; + sclk-strength = <3>; + }; + }; + i2c@2 { #address-cells = <1>; #size-cells = <0>; @@ -88,3 +147,7 @@ &enetc_port1 { status = "disabled"; }; + +&sai4 { + status = "okay"; +}; diff --git a/dts/src/arm64/freescale/fsl-ls1028a.dtsi b/dts/src/arm64/freescale/fsl-ls1028a.dtsi index 2896bbcfa3..b04581249f 100644 --- a/dts/src/arm64/freescale/fsl-ls1028a.dtsi +++ b/dts/src/arm64/freescale/fsl-ls1028a.dtsi @@ -89,6 +89,11 @@ IRQ_TYPE_LEVEL_LOW)>; }; + pmu { + compatible = "arm,cortex-a72-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + gic: interrupt-controller@6000000 { compatible= "arm,gic-v3"; #address-cells = <2>; @@ -235,6 +240,21 @@ status = "disabled"; }; + edma0: dma-controller@22c0000 { + #dma-cells = <2>; + compatible = "fsl,vf610-edma"; + reg = <0x0 0x22c0000 0x0 0x10000>, + <0x0 0x22d0000 0x0 0x10000>, + <0x0 0x22e0000 0x0 0x10000>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "edma-tx", "edma-err"; + dma-channels = <32>; + clock-names = "dmamux0", "dmamux1"; + clocks = <&clockgen 4 1>, + <&clockgen 4 1>; + }; + gpio1: gpio@2300000 { compatible = "fsl,qoriq-gpio"; reg = <0x0 0x2300000 0x0 0x10000>; @@ -277,7 +297,7 @@ sata: sata@3200000 { compatible = "fsl,ls1028a-ahci"; reg = <0x0 0x3200000 0x0 0x10000>, - <0x0 0x20140520 0x0 0x4>; + <0x7 0x100520 0x0 0x4>; reg-names = "ahci", "sata-ecc"; interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen 4 1>; @@ -336,6 +356,48 @@ <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; }; + sai1: audio-controller@f100000 { + #sound-dai-cells = <0>; + compatible = "fsl,vf610-sai"; + reg = <0x0 0xf100000 0x0 0x10000>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>, <&clockgen 4 1>, + <&clockgen 4 1>, <&clockgen 4 1>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "tx", "rx"; + dmas = <&edma0 1 4>, + <&edma0 1 3>; + status = "disabled"; + }; + + sai2: audio-controller@f110000 { + #sound-dai-cells = <0>; + compatible = "fsl,vf610-sai"; + reg = <0x0 0xf110000 0x0 0x10000>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>, <&clockgen 4 1>, + <&clockgen 4 1>, <&clockgen 4 1>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "tx", "rx"; + dmas = <&edma0 1 6>, + <&edma0 1 5>; + status = "disabled"; + }; + + sai4: audio-controller@f130000 { + #sound-dai-cells = <0>; + compatible = "fsl,vf610-sai"; + reg = <0x0 0xf130000 0x0 0x10000>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>, <&clockgen 4 1>, + <&clockgen 4 1>, <&clockgen 4 1>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "tx", "rx"; + dmas = <&edma0 1 10>, + <&edma0 1 9>; + status = "disabled"; + }; + pcie@1f0000000 { /* Integrated Endpoint Root Complex */ compatible = "pci-host-ecam-generic"; reg = <0x01 0xf0000000 0x0 0x100000>; diff --git a/dts/src/arm64/freescale/fsl-ls1043a-rdb.dts b/dts/src/arm64/freescale/fsl-ls1043a-rdb.dts index 17ca357e85..4223a2352d 100644 --- a/dts/src/arm64/freescale/fsl-ls1043a-rdb.dts +++ b/dts/src/arm64/freescale/fsl-ls1043a-rdb.dts @@ -15,7 +15,6 @@ model = "LS1043A RDB Board"; aliases { - crypto = &crypto; serial0 = &duart0; serial1 = &duart1; serial2 = &duart2; diff --git a/dts/src/arm64/freescale/fsl-ls1043a.dtsi b/dts/src/arm64/freescale/fsl-ls1043a.dtsi index 6fd6116509..71d9ed9ff9 100644 --- a/dts/src/arm64/freescale/fsl-ls1043a.dtsi +++ b/dts/src/arm64/freescale/fsl-ls1043a.dtsi @@ -18,6 +18,7 @@ #size-cells = <2>; aliases { + crypto = &crypto; fman0 = &fman0; ethernet0 = &enet0; ethernet1 = &enet1; @@ -296,7 +297,6 @@ interrupts = <0 99 0x4>; clock-names = "qspi_en", "qspi"; clocks = <&clockgen 4 0>, <&clockgen 4 0>; - big-endian; status = "disabled"; }; diff --git a/dts/src/arm64/freescale/fsl-ls1046a.dtsi b/dts/src/arm64/freescale/fsl-ls1046a.dtsi index cb7185014d..b0ef08b090 100644 --- a/dts/src/arm64/freescale/fsl-ls1046a.dtsi +++ b/dts/src/arm64/freescale/fsl-ls1046a.dtsi @@ -215,8 +215,6 @@ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; clock-names = "qspi_en", "qspi"; clocks = <&clockgen 4 1>, <&clockgen 4 1>; - big-endian; - fsl,qspi-has-second-chip; status = "disabled"; }; diff --git a/dts/src/arm64/freescale/fsl-lx2160a-qds.dts b/dts/src/arm64/freescale/fsl-lx2160a-qds.dts index 99a22abbe7..1a5acf62f2 100644 --- a/dts/src/arm64/freescale/fsl-lx2160a-qds.dts +++ b/dts/src/arm64/freescale/fsl-lx2160a-qds.dts @@ -95,6 +95,22 @@ }; }; +&sata0 { + status = "okay"; +}; + +&sata1 { + status = "okay"; +}; + +&sata2 { + status = "okay"; +}; + +&sata3 { + status = "okay"; +}; + &uart0 { status = "okay"; }; diff --git a/dts/src/arm64/freescale/fsl-lx2160a-rdb.dts b/dts/src/arm64/freescale/fsl-lx2160a-rdb.dts index 9df37b1594..c2817b7842 100644 --- a/dts/src/arm64/freescale/fsl-lx2160a-rdb.dts +++ b/dts/src/arm64/freescale/fsl-lx2160a-rdb.dts @@ -128,6 +128,22 @@ }; }; +&sata0 { + status = "okay"; +}; + +&sata1 { + status = "okay"; +}; + +&sata2 { + status = "okay"; +}; + +&sata3 { + status = "okay"; +}; + &uart0 { status = "okay"; }; diff --git a/dts/src/arm64/freescale/fsl-lx2160a.dtsi b/dts/src/arm64/freescale/fsl-lx2160a.dtsi index fe87204850..125a8cc2c5 100644 --- a/dts/src/arm64/freescale/fsl-lx2160a.dtsi +++ b/dts/src/arm64/freescale/fsl-lx2160a.dtsi @@ -33,6 +33,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster0_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@1 { @@ -48,6 +49,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster0_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@100 { @@ -63,6 +65,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster1_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@101 { @@ -78,6 +81,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster1_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@200 { @@ -93,6 +97,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster2_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@201 { @@ -108,6 +113,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster2_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@300 { @@ -123,6 +129,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster3_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@301 { @@ -138,6 +145,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster3_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@400 { @@ -153,6 +161,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster4_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@401 { @@ -168,6 +177,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster4_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@500 { @@ -183,6 +193,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster5_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@501 { @@ -198,6 +209,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster5_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@600 { @@ -213,6 +225,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster6_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@601 { @@ -228,6 +241,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster6_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@700 { @@ -243,6 +257,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster7_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@701 { @@ -258,6 +273,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster7_l2>; + cpu-idle-states = <&cpu_pw20>; }; cluster0_l2: l2-cache0 { @@ -323,6 +339,15 @@ cache-sets = <1024>; cache-level = <2>; }; + + cpu_pw20: cpu-pw20 { + compatible = "arm,idle-state"; + idle-state-name = "PW20"; + arm,psci-suspend-param = <0x0>; + entry-latency-us = <2000>; + exit-latency-us = <2000>; + min-residency-us = <6000>; + }; }; gic: interrupt-controller@6000000 { @@ -687,6 +712,50 @@ status = "disabled"; }; + sata0: sata@3200000 { + compatible = "fsl,lx2160a-ahci"; + reg = <0x0 0x3200000 0x0 0x10000>, + <0x7 0x100520 0x0 0x4>; + reg-names = "ahci", "sata-ecc"; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 3>; + dma-coherent; + status = "disabled"; + }; + + sata1: sata@3210000 { + compatible = "fsl,lx2160a-ahci"; + reg = <0x0 0x3210000 0x0 0x10000>, + <0x7 0x100520 0x0 0x4>; + reg-names = "ahci", "sata-ecc"; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 3>; + dma-coherent; + status = "disabled"; + }; + + sata2: sata@3220000 { + compatible = "fsl,lx2160a-ahci"; + reg = <0x0 0x3220000 0x0 0x10000>, + <0x7 0x100520 0x0 0x4>; + reg-names = "ahci", "sata-ecc"; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 3>; + dma-coherent; + status = "disabled"; + }; + + sata3: sata@3230000 { + compatible = "fsl,lx2160a-ahci"; + reg = <0x0 0x3230000 0x0 0x10000>, + <0x7 0x100520 0x0 0x4>; + reg-names = "ahci", "sata-ecc"; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 3>; + dma-coherent; + status = "disabled"; + }; + smmu: iommu@5000000 { compatible = "arm,mmu-500"; reg = <0 0x5000000 0 0x800000>; diff --git a/dts/src/arm64/freescale/imx8mm-evk.dts b/dts/src/arm64/freescale/imx8mm-evk.dts new file mode 100644 index 0000000000..2d5d89475b --- /dev/null +++ b/dts/src/arm64/freescale/imx8mm-evk.dts @@ -0,0 +1,235 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019 NXP + */ + +/dts-v1/; + +#include "imx8mm.dtsi" + +/ { + model = "FSL i.MX8MM EVK board"; + compatible = "fsl,imx8mm-evk", "fsl,imx8mm"; + + chosen { + stdout-path = &uart2; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_led>; + + status { + label = "status"; + gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + at803x,led-act-blind-workaround; + at803x,eee-okay; + at803x,vddio-1p8v; + }; + }; +}; + +&uart2 { /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + bus-width = <4>; + vmmc-supply = <®_usdhc2_vmmc>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 + MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22 0x19 + >; + }; + + pinctrl_gpio_led: gpioledgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19 + >; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc { + fsl,pins = < + MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 + MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2grpgpio { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x1c4 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +}; diff --git a/dts/src/arm64/freescale/imx8mm.dtsi b/dts/src/arm64/freescale/imx8mm.dtsi new file mode 100644 index 0000000000..6b407a94c0 --- /dev/null +++ b/dts/src/arm64/freescale/imx8mm.dtsi @@ -0,0 +1,733 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019 NXP + */ + +#include <dt-bindings/clock/imx8mm-clock.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/thermal/thermal.h> + +#include "imx8mm-pinfunc.h" + +/ { + compatible = "fsl,imx8mm"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + ethernet0 = &fec1; + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + i2c3 = &i2c4; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + spi0 = &ecspi1; + spi1 = &ecspi2; + spi2 = &ecspi3; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + mmc2 = &usdhc3; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + A53_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0>; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clk IMX8MM_CLK_ARM>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + operating-points-v2 = <&a53_opp_table>; + }; + + A53_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1>; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clk IMX8MM_CLK_ARM>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + operating-points-v2 = <&a53_opp_table>; + }; + + A53_2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x2>; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clk IMX8MM_CLK_ARM>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + operating-points-v2 = <&a53_opp_table>; + }; + + A53_3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x3>; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clk IMX8MM_CLK_ARM>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + operating-points-v2 = <&a53_opp_table>; + }; + + A53_L2: l2-cache0 { + compatible = "cache"; + }; + }; + + a53_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <850000>; + clock-latency-ns = <150000>; + }; + + opp-1600000000 { + opp-hz = /bits/ 64 <1600000000>; + opp-microvolt = <900000>; + clock-latency-ns = <150000>; + opp-suspend; + }; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0x80000000>; + }; + + osc_32k: clock-osc-32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "osc_32k"; + }; + + osc_24m: clock-osc-24m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "osc_24m"; + }; + + clk_ext1: clock-ext1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <133000000>; + clock-output-names = "clk_ext1"; + }; + + clk_ext2: clock-ext2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <133000000>; + clock-output-names = "clk_ext2"; + }; + + clk_ext3: clock-ext3 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <133000000>; + clock-output-names = "clk_ext3"; + }; + + clk_ext4: clock-ext4 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency= <133000000>; + clock-output-names = "clk_ext4"; + }; + + gic: interrupt-controller@38800000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x38800000 0 0x10000>, /* GIC Dist */ + <0x0 0x38880000 0 0xC0000>; /* GICR (RD_base + SGI_base) */ + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 + (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>; + interrupt-affinity = <&A53_0>, <&A53_1>, <&A53_2>, <&A53_3>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Secure */ + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Non-Secure */ + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, /* Virtual */ + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; /* Hypervisor */ + clock-frequency = <8000000>; + arm,no-tick-in-suspend; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x0 0x3e000000>; + + aips1: bus@30000000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio1: gpio@30200000 { + compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio"; + reg = <0x30200000 0x10000>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@30210000 { + compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio"; + reg = <0x30210000 0x10000>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@30220000 { + compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio"; + reg = <0x30220000 0x10000>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@30230000 { + compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio"; + reg = <0x30230000 0x10000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio5: gpio@30240000 { + compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio"; + reg = <0x30240000 0x10000>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + wdog1: watchdog@30280000 { + compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt"; + reg = <0x30280000 0x10000>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_WDOG1_ROOT>; + status = "disabled"; + }; + + wdog2: watchdog@30290000 { + compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt"; + reg = <0x30290000 0x10000>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_WDOG2_ROOT>; + status = "disabled"; + }; + + wdog3: watchdog@302a0000 { + compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt"; + reg = <0x302a0000 0x10000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_WDOG3_ROOT>; + status = "disabled"; + }; + + sdma2: dma-controller@302c0000 { + compatible = "fsl,imx8mm-sdma", "fsl,imx7d-sdma"; + reg = <0x302c0000 0x10000>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SDMA2_ROOT>, + <&clk IMX8MM_CLK_SDMA2_ROOT>; + clock-names = "ipg", "ahb"; + #dma-cells = <3>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; + }; + + sdma3: dma-controller@302b0000 { + compatible = "fsl,imx8mm-sdma", "fsl,imx7d-sdma"; + reg = <0x302b0000 0x10000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SDMA3_ROOT>, + <&clk IMX8MM_CLK_SDMA3_ROOT>; + clock-names = "ipg", "ahb"; + #dma-cells = <3>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; + }; + + iomuxc: pinctrl@30330000 { + compatible = "fsl,imx8mm-iomuxc"; + reg = <0x30330000 0x10000>; + }; + + gpr: iomuxc-gpr@30340000 { + compatible = "fsl,imx8mm-iomuxc-gpr", "syscon"; + reg = <0x30340000 0x10000>; + }; + + ocotp: ocotp-ctrl@30350000 { + compatible = "fsl,imx8mm-ocotp", "fsl,imx7d-ocotp", "syscon"; + reg = <0x30350000 0x10000>; + clocks = <&clk IMX8MM_CLK_OCOTP_ROOT>; + /* For nvmem subnodes */ + #address-cells = <1>; + #size-cells = <1>; + }; + + anatop: anatop@30360000 { + compatible = "fsl,imx8mm-anatop", "syscon", "simple-bus"; + reg = <0x30360000 0x10000>; + }; + + snvs: snvs@30370000 { + compatible = "fsl,sec-v4.0-mon","syscon", "simple-mfd"; + reg = <0x30370000 0x10000>; + + snvs_rtc: snvs-rtc-lp { + compatible = "fsl,sec-v4.0-mon-rtc-lp"; + regmap = <&snvs>; + offset = <0x34>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + }; + + snvs_pwrkey: snvs-powerkey { + compatible = "fsl,sec-v4.0-pwrkey"; + regmap = <&snvs>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + linux,keycode = <KEY_POWER>; + wakeup-source; + }; + }; + + clk: clock-controller@30380000 { + compatible = "fsl,imx8mm-ccm"; + reg = <0x30380000 0x10000>; + #clock-cells = <1>; + clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>, + <&clk_ext3>, <&clk_ext4>; + clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2", + "clk_ext3", "clk_ext4"; + }; + + src: reset-controller@30390000 { + compatible = "fsl,imx8mm-src", "syscon"; + reg = <0x30390000 0x10000>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + #reset-cells = <1>; + }; + }; + + aips2: bus@30400000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pwm1: pwm@30660000 { + compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm"; + reg = <0x30660000 0x10000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_PWM1_ROOT>, + <&clk IMX8MM_CLK_PWM1_ROOT>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm2: pwm@30670000 { + compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm"; + reg = <0x30670000 0x10000>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_PWM2_ROOT>, + <&clk IMX8MM_CLK_PWM2_ROOT>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm3: pwm@30680000 { + compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm"; + reg = <0x30680000 0x10000>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_PWM3_ROOT>, + <&clk IMX8MM_CLK_PWM3_ROOT>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm4: pwm@30690000 { + compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm"; + reg = <0x30690000 0x10000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_PWM4_ROOT>, + <&clk IMX8MM_CLK_PWM4_ROOT>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + }; + + aips3: bus@30800000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + ecspi1: spi@30820000 { + compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30820000 0x10000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_ECSPI1_ROOT>, + <&clk IMX8MM_CLK_ECSPI1_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + ecspi2: spi@30830000 { + compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30830000 0x10000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_ECSPI2_ROOT>, + <&clk IMX8MM_CLK_ECSPI2_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + ecspi3: spi@30840000 { + compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30840000 0x10000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_ECSPI3_ROOT>, + <&clk IMX8MM_CLK_ECSPI3_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart1: serial@30860000 { + compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart"; + reg = <0x30860000 0x10000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_UART1_ROOT>, + <&clk IMX8MM_CLK_UART1_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart3: serial@30880000 { + compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart"; + reg = <0x30880000 0x10000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_UART3_ROOT>, + <&clk IMX8MM_CLK_UART3_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart2: serial@30890000 { + compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart"; + reg = <0x30890000 0x10000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_UART2_ROOT>, + <&clk IMX8MM_CLK_UART2_ROOT>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + i2c1: i2c@30a20000 { + compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30a20000 0x10000>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_I2C1_ROOT>; + status = "disabled"; + }; + + i2c2: i2c@30a30000 { + compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30a30000 0x10000>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_I2C2_ROOT>; + status = "disabled"; + }; + + i2c3: i2c@30a40000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c"; + reg = <0x30a40000 0x10000>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_I2C3_ROOT>; + status = "disabled"; + }; + + i2c4: i2c@30a50000 { + compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30a50000 0x10000>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_I2C4_ROOT>; + status = "disabled"; + }; + + uart4: serial@30a60000 { + compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart"; + reg = <0x30a60000 0x10000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_UART4_ROOT>, + <&clk IMX8MM_CLK_UART4_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + usdhc1: mmc@30b40000 { + compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; + reg = <0x30b40000 0x10000>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_DUMMY>, + <&clk IMX8MM_CLK_NAND_USDHC_BUS>, + <&clk IMX8MM_CLK_USDHC1_ROOT>; + clock-names = "ipg", "ahb", "per"; + assigned-clocks = <&clk IMX8MM_CLK_USDHC1>; + assigned-clock-rates = <400000000>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + bus-width = <4>; + status = "disabled"; + }; + + usdhc2: mmc@30b50000 { + compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; + reg = <0x30b50000 0x10000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_DUMMY>, + <&clk IMX8MM_CLK_NAND_USDHC_BUS>, + <&clk IMX8MM_CLK_USDHC2_ROOT>; + clock-names = "ipg", "ahb", "per"; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + bus-width = <4>; + status = "disabled"; + }; + + usdhc3: mmc@30b60000 { + compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; + reg = <0x30b60000 0x10000>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_DUMMY>, + <&clk IMX8MM_CLK_NAND_USDHC_BUS>, + <&clk IMX8MM_CLK_USDHC3_ROOT>; + clock-names = "ipg", "ahb", "per"; + assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>; + assigned-clock-rates = <400000000>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + bus-width = <4>; + status = "disabled"; + }; + + sdma1: dma-controller@30bd0000 { + compatible = "fsl,imx8mm-sdma", "fsl,imx7d-sdma"; + reg = <0x30bd0000 0x10000>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SDMA1_ROOT>, + <&clk IMX8MM_CLK_SDMA1_ROOT>; + clock-names = "ipg", "ahb"; + #dma-cells = <3>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; + }; + + fec1: ethernet@30be0000 { + compatible = "fsl,imx8mm-fec", "fsl,imx6sx-fec"; + reg = <0x30be0000 0x10000>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_ENET1_ROOT>, + <&clk IMX8MM_CLK_ENET1_ROOT>, + <&clk IMX8MM_CLK_ENET_TIMER>, + <&clk IMX8MM_CLK_ENET_REF>, + <&clk IMX8MM_CLK_ENET_PHY_REF>; + clock-names = "ipg", "ahb", "ptp", + "enet_clk_ref", "enet_out"; + assigned-clocks = <&clk IMX8MM_CLK_ENET_AXI>, + <&clk IMX8MM_CLK_ENET_TIMER>, + <&clk IMX8MM_CLK_ENET_REF>, + <&clk IMX8MM_CLK_ENET_TIMER>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>, + <&clk IMX8MM_SYS_PLL2_100M>, + <&clk IMX8MM_SYS_PLL2_125M>; + assigned-clock-rates = <0>, <0>, <125000000>, <100000000>; + fsl,num-tx-queues = <3>; + fsl,num-rx-queues = <3>; + status = "disabled"; + }; + + }; + + aips4: bus@32c00000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + usbotg1: usb@32e40000 { + compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb"; + reg = <0x32e40000 0x200>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>; + clock-names = "usb1_ctrl_root_clk"; + assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>, + <&clk IMX8MM_CLK_USB_CORE_REF>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>, + <&clk IMX8MM_SYS_PLL1_100M>; + fsl,usbphy = <&usbphynop1>; + fsl,usbmisc = <&usbmisc1 0>; + status = "disabled"; + }; + + usbphynop1: usbphynop1 { + compatible = "usb-nop-xceiv"; + clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; + assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>; + clock-names = "main_clk"; + }; + + usbmisc1: usbmisc@32e40200 { + compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc"; + #index-cells = <1>; + reg = <0x32e40200 0x200>; + }; + + usbotg2: usb@32e50000 { + compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb"; + reg = <0x32e50000 0x200>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>; + clock-names = "usb1_ctrl_root_clk"; + assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>, + <&clk IMX8MM_CLK_USB_CORE_REF>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>, + <&clk IMX8MM_SYS_PLL1_100M>; + fsl,usbphy = <&usbphynop2>; + fsl,usbmisc = <&usbmisc2 0>; + status = "disabled"; + }; + + usbphynop2: usbphynop2 { + compatible = "usb-nop-xceiv"; + clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; + assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>; + clock-names = "main_clk"; + }; + + usbmisc2: usbmisc@32e50200 { + compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc"; + #index-cells = <1>; + reg = <0x32e50200 0x200>; + }; + + }; + + dma_apbh: dma-controller@33000000 { + compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh"; + reg = <0x33000000 0x2000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3"; + #dma-cells = <1>; + dma-channels = <4>; + clocks = <&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>; + }; + + gpmi: nand-controller@33002000{ + compatible = "fsl,imx8mm-gpmi-nand", "fsl,imx7d-gpmi-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x33002000 0x2000>, <0x33004000 0x4000>; + reg-names = "gpmi-nand", "bch"; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "bch"; + clocks = <&clk IMX8MM_CLK_NAND_ROOT>, + <&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>; + clock-names = "gpmi_io", "gpmi_bch_apb"; + dmas = <&dma_apbh 0>; + dma-names = "rx-tx"; + status = "disabled"; + }; + }; +}; diff --git a/dts/src/arm64/freescale/imx8mq-evk.dts b/dts/src/arm64/freescale/imx8mq-evk.dts index 54737bf177..b2038be8bb 100644 --- a/dts/src/arm64/freescale/imx8mq-evk.dts +++ b/dts/src/arm64/freescale/imx8mq-evk.dts @@ -21,6 +21,12 @@ reg = <0x00000000 0x40000000 0 0xc0000000>; }; + pcie0_refclk: pcie0-refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + reg_usdhc2_vmmc: regulator-vsd-3v3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_reg_usdhc2>; @@ -31,6 +37,63 @@ gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; enable-active-high; }; + + buck2_reg: regulator-buck2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_buck2>; + compatible = "regulator-gpio"; + regulator-name = "vdd_arm"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1000000>; + gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; + states = <1000000 0x0 + 900000 0x1>; + }; + + wm8524: audio-codec { + #sound-dai-cells = <0>; + compatible = "wlf,wm8524"; + wlf,mute-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + }; + + sound-wm8524 { + compatible = "simple-audio-card"; + simple-audio-card,name = "wm8524-audio"; + simple-audio-card,format = "i2s"; + simple-audio-card,frame-master = <&cpudai>; + simple-audio-card,bitclock-master = <&cpudai>; + simple-audio-card,widgets = + "Line", "Left Line Out Jack", + "Line", "Right Line Out Jack"; + simple-audio-card,routing = + "Left Line Out Jack", "LINEVOUTL", + "Right Line Out Jack", "LINEVOUTR"; + + cpudai: simple-audio-card,cpu { + sound-dai = <&sai2>; + }; + + link_codec: simple-audio-card,codec { + sound-dai = <&wm8524>; + clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>; + }; + }; +}; + +&A53_0 { + cpu-supply = <&buck2_reg>; +}; + +&A53_1 { + cpu-supply = <&buck2_reg>; +}; + +&A53_2 { + cpu-supply = <&buck2_reg>; +}; + +&A53_3 { + cpu-supply = <&buck2_reg>; }; &fec1 { @@ -52,6 +115,26 @@ }; }; +&sai2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2>; + assigned-clocks = <&clk IMX8MQ_CLK_SAI2>; + assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + status = "okay"; +}; + +&gpio5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_reset>; + + wl-reg-on { + gpio-hog; + gpios = <29 GPIO_ACTIVE_HIGH>; + output-high; + }; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -143,6 +226,22 @@ }; }; +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie0>; + reset-gpio = <&gpio5 28 GPIO_ACTIVE_LOW>; + clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>, + <&clk IMX8MQ_CLK_PCIE1_AUX>, + <&clk IMX8MQ_CLK_PCIE1_PHY>, + <&pcie0_refclk>; + clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus"; + status = "okay"; +}; + +&pgc_gpu { + power-supply = <&sw1a_reg>; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; @@ -203,6 +302,13 @@ }; &iomuxc { + pinctrl_buck2: vddarmgrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x19 + >; + + }; + pinctrl_fec1: fec1grp { fsl,pins = < MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3 @@ -230,6 +336,13 @@ >; }; + pinctrl_pcie0: pcie0grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B 0x76 + MX8MQ_IOMUXC_UART4_RXD_GPIO5_IO28 0x16 + >; + }; + pinctrl_qspi: qspigrp { fsl,pins = < MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x82 @@ -248,6 +361,16 @@ >; }; + pinctrl_sai2: sai2grp { + fsl,pins = < + MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6 + MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6 + MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK 0xd6 + MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6 + MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8 0xd6 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49 @@ -347,4 +470,10 @@ MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 >; }; + + pinctrl_wifi_reset: wifiresetgrp { + fsl,pins = < + MX8MQ_IOMUXC_UART4_TXD_GPIO5_IO29 0x16 + >; + }; }; diff --git a/dts/src/arm64/freescale/imx8mq-zii-ultra-rmb3.dts b/dts/src/arm64/freescale/imx8mq-zii-ultra-rmb3.dts new file mode 100644 index 0000000000..d2a6da4799 --- /dev/null +++ b/dts/src/arm64/freescale/imx8mq-zii-ultra-rmb3.dts @@ -0,0 +1,95 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2019 Zodiac Inflight Innovations + */ + +/dts-v1/; + +#include "imx8mq-zii-ultra.dtsi" + +/ { + model = "ZII i.MX8MQ Ultra RMB3 Board"; + compatible = "zii,imx8mq-ultra-rmb3", "zii,imx8mq-ultra", "fsl,imx8mq"; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + nor_flash: flash@0 { + compatible = "st,n25q128a13", "jedec,spi-nor"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&i2c2 { + temp-sense@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; +}; + +&i2c4 { + touchscreen@20 { + compatible = "syna,rmi4-i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ts>; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <2>; + }; + + rmi4-f11@11 { + reg = <0x11>; + touchscreen-inverted-x; + touchscreen-swapped-x-y; + syna,sensor-type = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + touchscreen-inverted-x; + touchscreen-swapped-x-y; + syna,sensor-type = <1>; + }; + }; + + touchscreen@2a { + compatible = "eeti,exc3000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ts>; + reg = <0x2a>; + interrupt-parent = <&gpio1>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + touchscreen-inverted-x; + touchscreen-swapped-x-y; + status = "disabled"; + }; +}; + +&usbhub { + swap-dx-lanes = <0>; +}; + +&iomuxc { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX8MQ_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x19 + MX8MQ_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x82 + MX8MQ_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x82 + MX8MQ_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x82 + >; + }; +}; diff --git a/dts/src/arm64/freescale/imx8mq-zii-ultra-zest.dts b/dts/src/arm64/freescale/imx8mq-zii-ultra-zest.dts new file mode 100644 index 0000000000..1084d93304 --- /dev/null +++ b/dts/src/arm64/freescale/imx8mq-zii-ultra-zest.dts @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2019 Zodiac Inflight Innovations + */ + +/dts-v1/; + +#include "imx8mq-zii-ultra.dtsi" + +/ { + model = "ZII i.MX8MQ Ultra Zest Board"; + compatible = "zii,imx8mq-ultra-zest", "zii,imx8mq-ultra", "fsl,imx8mq"; +}; + +&i2c4 { + touchscreen@4a { + compatible = "atmel,maxtouch"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ts>; + reg = <0x4a>; + interrupt-parent = <&gpio1>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + }; +}; diff --git a/dts/src/arm64/freescale/imx8mq-zii-ultra.dtsi b/dts/src/arm64/freescale/imx8mq-zii-ultra.dtsi new file mode 100644 index 0000000000..7a1706f969 --- /dev/null +++ b/dts/src/arm64/freescale/imx8mq-zii-ultra.dtsi @@ -0,0 +1,725 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2019 Zodiac Inflight Innovations + */ + +#include "imx8mq.dtsi" + +/ { + aliases { + mdio-gpio0 = &mdio0; + rtc0 = &ds1341; + }; + + chosen { + stdout-path = &uart1; + }; + + mdio0: bitbang-mdio { + compatible = "virtual,mdio-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mdio_bitbang>, <&pinctrl_fec1_phy_reset>; + gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>, /* MDC */ + <&gpio1 14 GPIO_ACTIVE_HIGH>; /* MDIO */ + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@0 { + reg = <0>; + reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; + }; + }; + + pcie0_refclk: clock-pcie0-refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + + pcie1_refclk: clock-pcie1-refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + + reg_12p0_main: regulator-12p0-main { + compatible = "regulator-fixed"; + regulator-name = "12V_MAIN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_5p0_main: regulator-5p0-main { + compatible = "regulator-fixed"; + vin-supply = <®_12p0_main>; + regulator-name = "5V_MAIN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_3p3_main: regulator-3p3-main { + compatible = "regulator-fixed"; + vin-supply = <®_12p0_main>; + regulator-name = "3V3V_MAIN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_5p0_user_usb: regulator-5p0-user-usb { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_user_usb>; + vin-supply = <®_5p0_main>; + regulator-name = "5V_USER_USB"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 12 GPIO_ACTIVE_LOW>; + startup-delay-us = <1000>; + }; + + reg_usdhc2_vmmc: regulator-vsd-3v3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2>; + compatible = "regulator-fixed"; + vin-supply = <®_3p3_main>; + regulator-name = "3V3_SD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_arm: regulator-arm { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_arm>; + compatible = "regulator-gpio"; + vin-supply = <®_12p0_main>; + regulator-name = "0V9_ARM"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1000000>; + gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + states = <1000000 0x0 + 900000 0x1>; + regulator-always-on; + }; +}; + +&A53_0 { + cpu-supply = <®_arm>; +}; + +&A53_1 { + cpu-supply = <®_arm>; +}; + +&A53_2 { + cpu-supply = <®_arm>; +}; + +&A53_3 { + cpu-supply = <®_arm>; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + + phy-handle = <&phy0>; + phy-mode = "rmii"; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + switch: switch@0 { + compatible = "marvell,mv88e6085"; + pinctrl-0 = <&pinctrl_switch_irq>; + pinctrl-names = "default"; + reg = <0>; + dsa,member = <0 0>; + eeprom-length = <512>; + interrupt-parent = <&gpio1>; + interrupts = <15 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "gigabit_proc"; + phy-handle = <&switchphy0>; + }; + + port@1 { + reg = <1>; + label = "netaux"; + phy-handle = <&switchphy1>; + }; + + port@2 { + reg = <2>; + label = "cpu"; + ethernet = <&fec1>; + + fixed-link { + speed = <100>; + full-duplex; + }; + }; + + port@3 { + reg = <3>; + label = "netright"; + phy-handle = <&switchphy3>; + }; + + port@4 { + reg = <4>; + label = "netleft"; + phy-handle = <&switchphy4>; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switchphy0: switchphy@0 { + reg = <0>; + interrupt-parent = <&switch>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + }; + + switchphy1: switchphy@1 { + reg = <1>; + interrupt-parent = <&switch>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; + }; + + switchphy2: switchphy@2 { + reg = <2>; + interrupt-parent = <&switch>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; + }; + + switchphy3: switchphy@3 { + reg = <3>; + interrupt-parent = <&switch>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; + }; + + switchphy4: switchphy@4 { + reg = <4>; + interrupt-parent = <&switch>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + }; + }; +}; + +&gpio3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio3_hog>; + + usb-emulation { + gpio-hog; + gpios = <10 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "usb-emulation"; + }; + + usb-mode1 { + gpio-hog; + gpios = <11 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "usb-mode1"; + }; + + usb-mode2 { + gpio-hog; + gpios = <13 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "usb-mode2"; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + pmic@8 { + compatible = "fsl,pfuze100"; + reg = <0x8>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <1100000>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <1100000>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + sw3a_reg: sw3ab { + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <975000>; + regulator-always-on; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1675000>; + regulator-max-microvolt = <1975000>; + regulator-always-on; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1625000>; + regulator-max-microvolt = <1875000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3625000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; + + eeprom@54 { + compatible = "atmel,24c128"; + reg = <0x54>; + }; + + ds1341: rtc@68 { + compatible = "dallas,ds1341"; + reg = <0x68>; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + usbhub: usbhub@2c { + compatible ="microchip,usb2513b"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbhub>; + reg = <0x2c>; + reset-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>; + }; +}; + +&i2c4 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; + + rave-sp { + compatible = "zii,rave-sp-rdu2"; + current-speed = <1000000>; + #address-cells = <1>; + #size-cells = <1>; + + watchdog { + compatible = "zii,rave-sp-watchdog"; + }; + + backlight { + compatible = "zii,rave-sp-backlight"; + }; + + pwrbutton { + compatible = "zii,rave-sp-pwrbutton"; + }; + + eeprom@a3 { + compatible = "zii,rave-sp-eeprom"; + reg = <0xa3 0x4000>; + zii,eeprom-name = "dds-eeprom"; + }; + + eeprom@a4 { + compatible = "zii,rave-sp-eeprom"; + reg = <0xa4 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + zii,eeprom-name = "main-eeprom"; + }; + }; +}; + +&usb3_phy0 { + vbus-supply = <®_5p0_user_usb>; + status = "okay"; +}; + +&usb_dwc3_0 { + dr_mode = "host"; + status = "okay"; +}; + +&usb3_phy1 { + vbus-supply = <®_5p0_main>; + status = "okay"; +}; + +&usb_dwc3_1 { + dr_mode = "host"; + status = "okay"; +}; + +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie0>; + reset-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; + clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>, + <&clk IMX8MQ_CLK_PCIE1_AUX>, + <&clk IMX8MQ_CLK_PCIE1_PHY>, + <&pcie0_refclk>; + clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus"; + status = "okay"; +}; + +&pcie1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie1>; + reset-gpio = <&gpio1 6 GPIO_ACTIVE_LOW>; + clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>, + <&clk IMX8MQ_CLK_PCIE2_AUX>, + <&clk IMX8MQ_CLK_PCIE2_PHY>, + <&pcie1_refclk>; + clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus"; + status = "okay"; +}; + +&pgc_gpu { + power-supply = <&sw1a_reg>; +}; + +&pgc_vpu { + power-supply = <&sw1c_reg>; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + vqmmc-supply = <&sw4_reg>; + bus-width = <8>; + non-removable; + no-sd; + no-sdio; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_usdhc2_vmmc>; + status = "okay"; +}; + +&snvs_rtc { + status = "disabled"; +}; + +&iomuxc { + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO 0x23 + MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MQ_IOMUXC_ENET_TD2_ENET1_TX_CLK 0x1f + MX8MQ_IOMUXC_ENET_RXC_ENET1_RX_ER 0x91 + MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + >; + }; + + pinctrl_fec1_phy_reset: fec1phyresetgrp { + fsl,pins = < + MX8MQ_IOMUXC_ENET_RD3_GPIO1_IO29 0x11 + >; + }; + + pinctrl_gpio3_hog: gpio3hoggrp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_DATA04_GPIO3_IO10 0x6 + MX8MQ_IOMUXC_NAND_DATA05_GPIO3_IO11 0x6 + MX8MQ_IOMUXC_NAND_DATA07_GPIO3_IO13 0x6 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f + MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000007f + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL 0x4000007f + MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA 0x4000007f + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x4000007f + MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x4000007f + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C4_SCL_I2C4_SCL 0x4000007f + MX8MQ_IOMUXC_I2C4_SDA_I2C4_SDA 0x4000007f + >; + }; + + pinctrl_mdio_bitbang: bitbangmdiogrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x44 + MX8MQ_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x64 + >; + }; + + pinctrl_pcie0: pcie0grp { + fsl,pins = < + MX8MQ_IOMUXC_UART4_RXD_PCIE1_CLKREQ_B 0x66 + MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x6 + >; + }; + + pinctrl_pcie1: pcie1grp { + fsl,pins = < + MX8MQ_IOMUXC_UART4_TXD_PCIE2_CLKREQ_B 0x66 + MX8MQ_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x6 + >; + }; + + pinctrl_reg_arm: regarmgrp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19 + >; + }; + + pinctrl_reg_usdhc2: regusdhc2grp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 + >; + }; + + pinctrl_reg_user_usb: reguserusbgrp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12 0x6 + >; + }; + + pinctrl_switch_irq: switchgrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x41 + >; + }; + + pinctrl_ts: tsgrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x96 + MX8MQ_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x96 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49 + MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x49 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX 0x49 + MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX 0x49 + >; + }; + + pinctrl_usbhub: usbhubgrp { + fsl,pins = < + MX8MQ_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x41 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83 + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3 + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3 + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3 + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3 + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3 + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3 + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3 + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3 + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3 + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x83 + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100grp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x8d + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xcd + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xcd + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xcd + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xcd + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xcd + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xcd + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xcd + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xcd + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xcd + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x8d + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200grp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x9f + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xdf + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xdf + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xdf + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xdf + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xdf + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xdf + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xdf + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xdf + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xdf + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x9f + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83 + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3 + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3 + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3 + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3 + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3 + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100grp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x85 + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc5 + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc5 + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc5 + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc5 + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc5 + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200grp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x87 + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc7 + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc7 + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc7 + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc7 + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc7 + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 + >; + }; +}; diff --git a/dts/src/arm64/freescale/imx8mq.dtsi b/dts/src/arm64/freescale/imx8mq.dtsi index 9155bd4784..6d635ba090 100644 --- a/dts/src/arm64/freescale/imx8mq.dtsi +++ b/dts/src/arm64/freescale/imx8mq.dtsi @@ -6,8 +6,10 @@ #include <dt-bindings/clock/imx8mq-clock.h> #include <dt-bindings/power/imx8mq-power.h> +#include <dt-bindings/reset/imx8mq-reset.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/thermal/thermal.h> #include "imx8mq-pinfunc.h" / { @@ -87,32 +89,48 @@ device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x0>; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clk IMX8MQ_CLK_ARM>; enable-method = "psci"; next-level-cache = <&A53_L2>; + operating-points-v2 = <&a53_opp_table>; + #cooling-cells = <2>; }; A53_1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x1>; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clk IMX8MQ_CLK_ARM>; enable-method = "psci"; next-level-cache = <&A53_L2>; + operating-points-v2 = <&a53_opp_table>; + #cooling-cells = <2>; }; A53_2: cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x2>; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clk IMX8MQ_CLK_ARM>; enable-method = "psci"; next-level-cache = <&A53_L2>; + operating-points-v2 = <&a53_opp_table>; + #cooling-cells = <2>; }; A53_3: cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x3>; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clk IMX8MQ_CLK_ARM>; enable-method = "psci"; next-level-cache = <&A53_L2>; + operating-points-v2 = <&a53_opp_table>; + #cooling-cells = <2>; }; A53_L2: l2-cache0 { @@ -120,6 +138,24 @@ }; }; + a53_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <900000>; + clock-latency-ns = <150000>; + }; + + opp-1300000000 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <1000000>; + clock-latency-ns = <150000>; + opp-suspend; + }; + }; + pmu { compatible = "arm,cortex-a53-pmu"; interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; @@ -132,6 +168,67 @@ method = "smc"; }; + thermal-zones { + cpu-thermal { + polling-delay-passive = <250>; + polling-delay = <2000>; + thermal-sensors = <&tmu 0>; + + trips { + cpu_alert: cpu-alert { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu-crit { + temperature = <90000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert>; + cooling-device = + <&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + gpu-thermal { + polling-delay-passive = <250>; + polling-delay = <2000>; + thermal-sensors = <&tmu 1>; + + trips { + gpu-crit { + temperature = <90000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + vpu-thermal { + polling-delay-passive = <250>; + polling-delay = <2000>; + thermal-sensors = <&tmu 2>; + + trips { + vpu-crit { + temperature = <90000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */ @@ -160,6 +257,7 @@ reg = <0x30200000 0x10000>; interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_GPIO1_ROOT>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -171,6 +269,7 @@ reg = <0x30210000 0x10000>; interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_GPIO2_ROOT>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -182,6 +281,7 @@ reg = <0x30220000 0x10000>; interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_GPIO3_ROOT>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -193,6 +293,7 @@ reg = <0x30230000 0x10000>; interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_GPIO4_ROOT>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -204,12 +305,65 @@ reg = <0x30240000 0x10000>; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_GPIO5_ROOT>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; + tmu: tmu@30260000 { + compatible = "fsl,imx8mq-tmu"; + reg = <0x30260000 0x10000>; + interrupt = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + little-endian; + fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>; + fsl,tmu-calibration = <0x00000000 0x00000023 + 0x00000001 0x00000029 + 0x00000002 0x0000002f + 0x00000003 0x00000035 + 0x00000004 0x0000003d + 0x00000005 0x00000043 + 0x00000006 0x0000004b + 0x00000007 0x00000051 + 0x00000008 0x00000057 + 0x00000009 0x0000005f + 0x0000000a 0x00000067 + 0x0000000b 0x0000006f + + 0x00010000 0x0000001b + 0x00010001 0x00000023 + 0x00010002 0x0000002b + 0x00010003 0x00000033 + 0x00010004 0x0000003b + 0x00010005 0x00000043 + 0x00010006 0x0000004b + 0x00010007 0x00000055 + 0x00010008 0x0000005d + 0x00010009 0x00000067 + 0x0001000a 0x00000070 + + 0x00020000 0x00000017 + 0x00020001 0x00000023 + 0x00020002 0x0000002d + 0x00020003 0x00000037 + 0x00020004 0x00000041 + 0x00020005 0x0000004b + 0x00020006 0x00000057 + 0x00020007 0x00000063 + 0x00020008 0x0000006f + + 0x00030000 0x00000015 + 0x00030001 0x00000021 + 0x00030002 0x0000002d + 0x00030003 0x00000039 + 0x00030004 0x00000045 + 0x00030005 0x00000053 + 0x00030006 0x0000005f + 0x00030007 0x00000071>; + #thermal-sensor-cells = <1>; + }; + wdog1: watchdog@30280000 { compatible = "fsl,imx8mq-wdt", "fsl,imx21-wdt"; reg = <0x30280000 0x10000>; @@ -234,16 +388,35 @@ status = "disabled"; }; + sdma2: sdma@302c0000 { + compatible = "fsl,imx8mq-sdma","fsl,imx7d-sdma"; + reg = <0x302c0000 0x10000>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_SDMA2_ROOT>, + <&clk IMX8MQ_CLK_SDMA2_ROOT>; + clock-names = "ipg", "ahb"; + #dma-cells = <3>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; + }; + iomuxc: iomuxc@30330000 { compatible = "fsl,imx8mq-iomuxc"; reg = <0x30330000 0x10000>; }; iomuxc_gpr: syscon@30340000 { - compatible = "fsl,imx8mq-iomuxc-gpr", "syscon"; + compatible = "fsl,imx8mq-iomuxc-gpr", "fsl,imx6q-iomuxc-gpr", "syscon"; reg = <0x30340000 0x10000>; }; + ocotp: ocotp-ctrl@30350000 { + compatible = "fsl,imx8mq-ocotp", "syscon"; + reg = <0x30350000 0x10000>; + clocks = <&clk IMX8MQ_CLK_OCOTP_ROOT>; + #address-cells = <1>; + #size-cells = <1>; + }; + anatop: syscon@30360000 { compatible = "fsl,imx8mq-anatop", "syscon"; reg = <0x30360000 0x10000>; @@ -278,6 +451,12 @@ "clk_ext3", "clk_ext4"; }; + src: reset-controller@30390000 { + compatible = "fsl,imx8mq-src", "syscon"; + reg = <0x30390000 0x10000>; + #reset-cells = <1>; + }; + gpc: gpc@303a0000 { compatible = "fsl,imx8mq-gpc"; reg = <0x303a0000 0x10000>; @@ -294,9 +473,25 @@ reg = <IMX8M_POWER_DOMAIN_MIPI>; }; - pgc_pcie1: power-domain@1 { + /* + * As per comment in ATF source code: + * + * PCIE1 and PCIE2 share the + * same reset signal, if we + * power down PCIE2, PCIE1 + * will be held in reset too. + * + * So instead of creating two + * separate power domains for + * PCIE1 and PCIE2 we create a + * link between both and use + * it as a shared PCIE power + * domain. + */ + pgc_pcie: power-domain@1 { #power-domain-cells = <0>; reg = <IMX8M_POWER_DOMAIN_PCIE1>; + power-domains = <&pgc_pcie2>; }; pgc_otg1: power-domain@2 { @@ -478,6 +673,21 @@ status = "disabled"; }; + sai2: sai@308b0000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx8mq-sai", + "fsl,imx6sx-sai"; + reg = <0x308b0000 0x10000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_SAI2_IPG>, + <&clk IMX8MQ_CLK_SAI2_ROOT>, + <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma1 10 24 0>, <&sdma1 11 24 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + i2c1: i2c@30a20000 { compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c"; reg = <0x30a20000 0x10000>; @@ -575,6 +785,17 @@ status = "disabled"; }; + sdma1: sdma@30bd0000 { + compatible = "fsl,imx8mq-sdma","fsl,imx7d-sdma"; + reg = <0x30bd0000 0x10000>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_SDMA1_ROOT>, + <&clk IMX8MQ_CLK_AHB>; + clock-names = "ipg", "ahb"; + #dma-cells = <3>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; + }; + fec1: ethernet@30be0000 { compatible = "fsl,imx8mq-fec", "fsl,imx6sx-fec"; reg = <0x30be0000 0x10000>; @@ -594,6 +815,30 @@ }; }; + gpu: gpu@38000000 { + compatible = "vivante,gc"; + reg = <0x38000000 0x40000>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_GPU_ROOT>, + <&clk IMX8MQ_CLK_GPU_SHADER_DIV>, + <&clk IMX8MQ_CLK_GPU_AXI>, + <&clk IMX8MQ_CLK_GPU_AHB>; + clock-names = "core", "shader", "bus", "reg"; + assigned-clocks = <&clk IMX8MQ_CLK_GPU_CORE_SRC>, + <&clk IMX8MQ_CLK_GPU_SHADER_SRC>, + <&clk IMX8MQ_CLK_GPU_AXI>, + <&clk IMX8MQ_CLK_GPU_AHB>, + <&clk IMX8MQ_GPU_PLL_BYPASS>; + assigned-clock-parents = <&clk IMX8MQ_GPU_PLL_OUT>, + <&clk IMX8MQ_GPU_PLL_OUT>, + <&clk IMX8MQ_GPU_PLL_OUT>, + <&clk IMX8MQ_GPU_PLL_OUT>, + <&clk IMX8MQ_GPU_PLL>; + assigned-clock-rates = <800000000>, <800000000>, + <800000000>, <800000000>, <0>; + power-domains = <&pgc_gpu>; + }; + usb_dwc3_0: usb@38100000 { compatible = "fsl,imx8mq-dwc3", "snps,dwc3"; reg = <0x38100000 0x10000>; @@ -658,6 +903,66 @@ status = "disabled"; }; + + pcie0: pcie@33800000 { + compatible = "fsl,imx8mq-pcie"; + reg = <0x33800000 0x400000>, + <0x1ff00000 0x80000>; + reg-names = "dbi", "config"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + bus-range = <0x00 0xff>; + ranges = <0x81000000 0 0x00000000 0x1ff80000 0 0x00010000 /* downstream I/O 64KB */ + 0x82000000 0 0x18000000 0x18000000 0 0x07f00000>; /* non-prefetchable memory */ + num-lanes = <1>; + num-viewport = <4>; + interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &gic GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &gic GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &gic GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &gic GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + fsl,max-link-speed = <2>; + power-domains = <&pgc_pcie>; + resets = <&src IMX8MQ_RESET_PCIEPHY>, + <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>, + <&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>; + reset-names = "pciephy", "apps", "turnoff"; + status = "disabled"; + }; + + pcie1: pcie@33c00000 { + compatible = "fsl,imx8mq-pcie"; + reg = <0x33c00000 0x400000>, + <0x27f00000 0x80000>; + reg-names = "dbi", "config"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x81000000 0 0x00000000 0x27f80000 0 0x00010000 /* downstream I/O 64KB */ + 0x82000000 0 0x20000000 0x20000000 0 0x07f00000>; /* non-prefetchable memory */ + num-lanes = <1>; + num-viewport = <4>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &gic GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &gic GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + fsl,max-link-speed = <2>; + power-domains = <&pgc_pcie>; + resets = <&src IMX8MQ_RESET_PCIEPHY2>, + <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_EN>, + <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF>; + reset-names = "pciephy", "apps", "turnoff"; + status = "disabled"; + }; + gic: interrupt-controller@38800000 { compatible = "arm,gic-v3"; reg = <0x38800000 0x10000>, /* GIC Dist */ diff --git a/dts/src/arm64/freescale/imx8qxp-mek.dts b/dts/src/arm64/freescale/imx8qxp-mek.dts index 03aad66545..bfdada2db1 100644 --- a/dts/src/arm64/freescale/imx8qxp-mek.dts +++ b/dts/src/arm64/freescale/imx8qxp-mek.dts @@ -60,6 +60,82 @@ }; }; +&adma_i2c1 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpi2c1 &pinctrl_ioexp_rst>; + status = "okay"; + + i2c-switch@71 { + compatible = "nxp,pca9646", "nxp,pca9546"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x71>; + reset-gpios = <&lsio_gpio1 1 GPIO_ACTIVE_LOW>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + max7322: gpio@68 { + compatible = "maxim,max7322"; + reg = <0x68>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + pressure-sensor@60 { + compatible = "fsl,mpl3115"; + reg = <0x60>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + pca9557_a: gpio@1a { + compatible = "nxp,pca9557"; + reg = <0x1a>; + gpio-controller; + #gpio-cells = <2>; + }; + + pca9557_b: gpio@1d { + compatible = "nxp,pca9557"; + reg = <0x1d>; + gpio-controller; + #gpio-cells = <2>; + }; + + light-sensor@44 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_isl29023>; + compatible = "isil,isl29023"; + reg = <0x44>; + interrupt-parent = <&lsio_gpio1>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + }; + }; + }; +}; + &usdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; @@ -100,6 +176,25 @@ >; }; + pinctrl_ioexp_rst: ioexp_rst_grp { + fsl,pins = < + IMX8QXP_SPI2_SDO_LSIO_GPIO1_IO01 0x06000021 + >; + }; + + pinctrl_isl29023: isl29023grp { + fsl,pins = < + IMX8QXP_SPI2_SDI_LSIO_GPIO1_IO02 0x00000021 + >; + }; + + pinctrl_lpi2c1: lpi2c1grp { + fsl,pins = < + IMX8QXP_USB_SS3_TC1_ADMA_I2C1_SCL 0x06000021 + IMX8QXP_USB_SS3_TC3_ADMA_I2C1_SDA 0x06000021 + >; + }; + pinctrl_lpuart0: lpuart0grp { fsl,pins = < IMX8QXP_UART0_RX_ADMA_UART0_RX 0x06000020 diff --git a/dts/src/arm64/freescale/imx8qxp.dtsi b/dts/src/arm64/freescale/imx8qxp.dtsi index 4c3dd95ed4..0683ee2a48 100644 --- a/dts/src/arm64/freescale/imx8qxp.dtsi +++ b/dts/src/arm64/freescale/imx8qxp.dtsi @@ -21,6 +21,7 @@ mmc1 = &usdhc2; mmc2 = &usdhc3; serial0 = &adma_lpuart0; + mu1 = &lsio_mu1; }; cpus { @@ -34,6 +35,9 @@ reg = <0x0 0x0>; enable-method = "psci"; next-level-cache = <&A35_L2>; + clocks = <&clk IMX_A35_CLK>; + operating-points-v2 = <&a35_opp_table>; + #cooling-cells = <2>; }; A35_1: cpu@1 { @@ -42,6 +46,9 @@ reg = <0x0 0x1>; enable-method = "psci"; next-level-cache = <&A35_L2>; + clocks = <&clk IMX_A35_CLK>; + operating-points-v2 = <&a35_opp_table>; + #cooling-cells = <2>; }; A35_2: cpu@2 { @@ -50,6 +57,9 @@ reg = <0x0 0x2>; enable-method = "psci"; next-level-cache = <&A35_L2>; + clocks = <&clk IMX_A35_CLK>; + operating-points-v2 = <&a35_opp_table>; + #cooling-cells = <2>; }; A35_3: cpu@3 { @@ -58,6 +68,9 @@ reg = <0x0 0x3>; enable-method = "psci"; next-level-cache = <&A35_L2>; + clocks = <&clk IMX_A35_CLK>; + operating-points-v2 = <&a35_opp_table>; + #cooling-cells = <2>; }; A35_L2: l2-cache0 { @@ -65,6 +78,24 @@ }; }; + a35_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-900000000 { + opp-hz = /bits/ 64 <900000000>; + opp-microvolt = <1000000>; + clock-latency-ns = <150000>; + }; + + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <150000>; + opp-suspend; + }; + }; + gic: interrupt-controller@51a00000 { compatible = "arm,gic-v3"; reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */ @@ -87,7 +118,8 @@ scu { compatible = "fsl,imx-scu"; mbox-names = "tx0", "tx1", "tx2", "tx3", - "rx0", "rx1", "rx2", "rx3"; + "rx0", "rx1", "rx2", "rx3", + "gip3"; mboxes = <&lsio_mu1 0 0 &lsio_mu1 0 1 &lsio_mu1 0 2 @@ -95,7 +127,8 @@ &lsio_mu1 1 0 &lsio_mu1 1 1 &lsio_mu1 1 2 - &lsio_mu1 1 3>; + &lsio_mu1 1 3 + &lsio_mu1 3 3>; clk: clock-controller { compatible = "fsl,imx8qxp-clk"; @@ -163,6 +196,39 @@ status = "disabled"; }; + adma_lpuart1: serial@5a070000 { + compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; + reg = <0x5a070000 0x1000>; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + clocks = <&adma_lpcg IMX_ADMA_LPCG_UART1_BAUD_CLK>; + clock-names = "ipg"; + power-domains = <&pd IMX_SC_R_UART_1>; + status = "disabled"; + }; + + adma_lpuart2: serial@5a080000 { + compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; + reg = <0x5a080000 0x1000>; + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + clocks = <&adma_lpcg IMX_ADMA_LPCG_UART2_BAUD_CLK>; + clock-names = "ipg"; + power-domains = <&pd IMX_SC_R_UART_2>; + status = "disabled"; + }; + + adma_lpuart3: serial@5a090000 { + compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; + reg = <0x5a090000 0x1000>; + interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + clocks = <&adma_lpcg IMX_ADMA_LPCG_UART3_BAUD_CLK>; + clock-names = "ipg"; + power-domains = <&pd IMX_SC_R_UART_3>; + status = "disabled"; + }; + adma_i2c0: i2c@5a800000 { compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; reg = <0x5a800000 0x4000>; @@ -328,7 +394,7 @@ compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; reg = <0x5d1b0000 0x10000>; interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; - #mbox-cells = <0>; + #mbox-cells = <2>; status = "disabled"; }; @@ -339,11 +405,19 @@ #mbox-cells = <2>; }; + lsio_mu2: mailbox@5d1d0000 { + compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; + reg = <0x5d1d0000 0x10000>; + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + status = "disabled"; + }; + lsio_mu3: mailbox@5d1e0000 { compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; reg = <0x5d1e0000 0x10000>; interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>; - #mbox-cells = <0>; + #mbox-cells = <2>; status = "disabled"; }; @@ -351,7 +425,7 @@ compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; reg = <0x5d1f0000 0x10000>; interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; - #mbox-cells = <0>; + #mbox-cells = <2>; status = "disabled"; }; @@ -443,4 +517,9 @@ power-domains = <&pd IMX_SC_R_GPIO_7>; }; }; + + watchdog { + compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt"; + timeout-sec = <60>; + }; }; |