diff options
Diffstat (limited to 'dts/src/arm64/qcom/msm8998-oneplus-common.dtsi')
| -rw-r--r-- | dts/src/arm64/qcom/msm8998-oneplus-common.dtsi | 88 |
1 files changed, 61 insertions, 27 deletions
diff --git a/dts/src/arm64/qcom/msm8998-oneplus-common.dtsi b/dts/src/arm64/qcom/msm8998-oneplus-common.dtsi index dbaea360bf..62bda23791 100644 --- a/dts/src/arm64/qcom/msm8998-oneplus-common.dtsi +++ b/dts/src/arm64/qcom/msm8998-oneplus-common.dtsi @@ -11,9 +11,9 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include "msm8998.dtsi" +#include "pm8005.dtsi" #include "pm8998.dtsi" #include "pmi8998.dtsi" -#include "pm8005.dtsi" / { /* Required for bootloader to select correct board */ @@ -32,6 +32,19 @@ height = <1920>; stride = <(1080 * 4)>; format = "a8r8g8b8"; + /* + * That's a lot of clocks, but it's necessary due + * to unused clk cleanup & no panel driver yet.. + */ + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_VSYNC_CLK>, + <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_BYTE0_CLK>, + <&mmcc MDSS_BYTE0_INTF_CLK>, + <&mmcc MDSS_PCLK0_CLK>, + <&mmcc MDSS_ESC0_CLK>; + power-domains = <&mmcc MDSS_GDSC>; }; }; @@ -77,7 +90,7 @@ pinctrl-names = "default"; pinctrl-0 = <&vol_keys_default>; - vol-down { + button-vol-down { label = "Volume down"; gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; @@ -85,7 +98,7 @@ wakeup-source; }; - vol-up { + button-vol-up { label = "Volume up"; gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; @@ -101,7 +114,7 @@ pinctrl-names = "default"; pinctrl-0 = <&hall_sensor_default>; - hall-sensor { + event-hall-sensor { label = "Hall Effect Sensor"; gpios = <&tlmm 124 GPIO_ACTIVE_LOW>; linux,input-type = <EV_SW>; @@ -245,32 +258,24 @@ status = "okay"; }; -&pm8005_lsid1 { - pm8005-regulators { - compatible = "qcom,pm8005-regulators"; - - vdd_s1-supply = <&vph_pwr>; - - pm8005_s1: s1 { /* VDD_GFX supply */ - regulator-min-microvolt = <524000>; - regulator-max-microvolt = <1100000>; - regulator-enable-ramp-delay = <500>; - - /* hack until we rig up the gpu consumer */ - regulator-always-on; - }; +&pm8005_regulators { + /* VDD_GFX supply */ + pm8005_s1: s1 { + regulator-min-microvolt = <524000>; + regulator-max-microvolt = <1100000>; + regulator-enable-ramp-delay = <500>; + /* Hack until we rig up the gpu consumer */ + regulator-always-on; }; }; &pm8998_gpio { - vol_keys_default: vol-keys-default { - pinconf { - pins = "gpio5", "gpio6"; - function = "normal"; - bias-pull-up; - input-enable; - qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; - }; + vol_keys_default: vol-keys-state { + pins = "gpio5", "gpio6"; + function = "normal"; + bias-pull-up; + input-enable; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; }; }; @@ -318,91 +323,113 @@ regulator-min-microvolt = <1352000>; regulator-max-microvolt = <1352000>; }; + vreg_s4a_1p8: s4 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-allow-set-load; }; + vreg_s5a_2p04: s5 { regulator-min-microvolt = <1904000>; regulator-max-microvolt = <2040000>; }; + vreg_s7a_1p025: s7 { regulator-min-microvolt = <900000>; regulator-max-microvolt = <1028000>; }; + vreg_l1a_0p875: l1 { regulator-min-microvolt = <880000>; regulator-max-microvolt = <880000>; }; + vreg_l2a_1p2: l2 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; + vreg_l3a_1p0: l3 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; }; + vreg_l5a_0p8: l5 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <800000>; }; + vreg_l6a_1p8: l6 { regulator-min-microvolt = <1808000>; regulator-max-microvolt = <1808000>; }; + vreg_l7a_1p8: l7 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; + vreg_l8a_1p2: l8 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; + vreg_l9a_1p8: l9 { regulator-min-microvolt = <1808000>; regulator-max-microvolt = <2960000>; }; + vreg_l10a_1p8: l10 { regulator-min-microvolt = <1808000>; regulator-max-microvolt = <2960000>; }; + vreg_l11a_1p0: l11 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; }; + vreg_l12a_1p8: l12 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; + vreg_l13a_2p95: l13 { regulator-min-microvolt = <1808000>; regulator-max-microvolt = <2960000>; }; + vreg_l14a_1p88: l14 { regulator-min-microvolt = <1880000>; regulator-max-microvolt = <1880000>; }; + vreg_l15a_1p8: l15 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; + vreg_l16a_2p7: l16 { regulator-min-microvolt = <2704000>; regulator-max-microvolt = <2704000>; }; + vreg_l17a_1p3: l17 { regulator-min-microvolt = <1304000>; regulator-max-microvolt = <1304000>; }; + vreg_l18a_2p7: l18 { regulator-min-microvolt = <2704000>; regulator-max-microvolt = <2704000>; }; + vreg_l19a_3p0: l19 { regulator-min-microvolt = <3008000>; regulator-max-microvolt = <3008000>; }; + vreg_l20a_2p95: l20 { regulator-min-microvolt = <2960000>; regulator-max-microvolt = <2960000>; @@ -411,34 +438,41 @@ vreg_l21a_2p95: l21 { regulator-min-microvolt = <2960000>; regulator-max-microvolt = <2960000>; - regulator-allow-set-load; regulator-system-load = <800000>; + regulator-allow-set-load; }; + vreg_l22a_2p85: l22 { regulator-min-microvolt = <2864000>; regulator-max-microvolt = <2864000>; }; + vreg_l23a_3p3: l23 { regulator-min-microvolt = <3312000>; regulator-max-microvolt = <3312000>; }; + vreg_l24a_3p075: l24 { regulator-min-microvolt = <3088000>; regulator-max-microvolt = <3088000>; }; + vreg_l25a_3p3: l25 { regulator-min-microvolt = <3104000>; regulator-max-microvolt = <3312000>; }; + vreg_l26a_1p2: l26 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-allow-set-load; }; + vreg_l28_3p0: l28 { regulator-min-microvolt = <3008000>; regulator-max-microvolt = <3008000>; }; + vreg_lvs1a_1p8: lvs1 { }; vreg_lvs2a_1p8: lvs2 { }; }; |