diff options
Diffstat (limited to 'dts/src')
1019 files changed, 36185 insertions, 6614 deletions
diff --git a/dts/src/arm/alpine.dtsi b/dts/src/arm/alpine.dtsi index 3b0675a1c4..4be9887033 100644 --- a/dts/src/arm/alpine.dtsi +++ b/dts/src/arm/alpine.dtsi @@ -154,7 +154,7 @@ reg = <0x0 0xfbc00000 0x0 0x100000>; interrupt-map-mask = <0xf800 0 0 7>; /* Add legacy interrupts for SATA devices only */ - interrupt-map = <0x4000 0 0 1 &gic 0 43 4>, + interrupt-map = <0x4000 0 0 1 &gic 0 43 4>, <0x4800 0 0 1 &gic 0 44 4>; /* 32 bit non prefetchable memory space */ diff --git a/dts/src/arm/am335x-boneblack-wireless.dts b/dts/src/arm/am335x-boneblack-wireless.dts index c72b09ab8d..207d2b63e0 100644 --- a/dts/src/arm/am335x-boneblack-wireless.dts +++ b/dts/src/arm/am335x-boneblack-wireless.dts @@ -19,7 +19,7 @@ regulator-name = "wlan-en-regulator"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - startup-delay-us= <70000>; + startup-delay-us = <70000>; /* WL_EN */ gpio = <&gpio3 9 0>; diff --git a/dts/src/arm/am335x-boneblack.dts b/dts/src/arm/am335x-boneblack.dts index 9312197316..b956e2f60f 100644 --- a/dts/src/arm/am335x-boneblack.dts +++ b/dts/src/arm/am335x-boneblack.dts @@ -168,3 +168,7 @@ "NC", "NC"; }; + +&baseboard_eeprom { + vcc-supply = <&ldo4_reg>; +}; diff --git a/dts/src/arm/am335x-boneblue.dts b/dts/src/arm/am335x-boneblue.dts index 147c00de37..34579e9863 100644 --- a/dts/src/arm/am335x-boneblue.dts +++ b/dts/src/arm/am335x-boneblue.dts @@ -106,7 +106,7 @@ regulator-name = "wlan-en-regulator"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - startup-delay-us= <70000>; + startup-delay-us = <70000>; /* WL_EN */ gpio = <&gpio3 9 0>; diff --git a/dts/src/arm/am335x-bonegreen-wireless.dts b/dts/src/arm/am335x-bonegreen-wireless.dts index 215f279e47..d388cffa1a 100644 --- a/dts/src/arm/am335x-bonegreen-wireless.dts +++ b/dts/src/arm/am335x-bonegreen-wireless.dts @@ -18,7 +18,7 @@ regulator-name = "wlan-en-regulator"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - startup-delay-us= <70000>; + startup-delay-us = <70000>; /* WL_EN */ gpio = <&gpio0 26 0>; diff --git a/dts/src/arm/am335x-cm-t335.dts b/dts/src/arm/am335x-cm-t335.dts index d9f003d886..993b134206 100644 --- a/dts/src/arm/am335x-cm-t335.dts +++ b/dts/src/arm/am335x-cm-t335.dts @@ -325,7 +325,7 @@ status = "okay"; tlv320aic23: codec@1a { compatible = "ti,tlv320aic23"; reg = <0x1a>; - #sound-dai-cells= <0>; + #sound-dai-cells = <0>; status = "okay"; }; }; @@ -491,7 +491,7 @@ status = "okay"; tx-num-evt = <1>; rx-num-evt = <1>; - #sound-dai-cells= <0>; + #sound-dai-cells = <0>; status = "okay"; }; diff --git a/dts/src/arm/am335x-evm.dts b/dts/src/arm/am335x-evm.dts index b9745a2f0e..25c6ac9913 100644 --- a/dts/src/arm/am335x-evm.dts +++ b/dts/src/arm/am335x-evm.dts @@ -92,20 +92,18 @@ 0x0201006c>; /* DOWN */ }; - gpio_keys: volume_keys0 { + gpio_keys: volume-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; - switch9 { + switch-9 { label = "volume-up"; linux,code = <115>; gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; wakeup-source; }; - switch10 { + switch-10 { label = "volume-down"; linux,code = <114>; gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/am335x-guardian.dts b/dts/src/arm/am335x-guardian.dts index 1a7e187b19..f635626656 100644 --- a/dts/src/arm/am335x-guardian.dts +++ b/dts/src/arm/am335x-guardian.dts @@ -33,8 +33,6 @@ pinctrl-names = "default"; pinctrl-0 = <&guardian_button_pins>; compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; select-button { label = "guardian-select-button"; diff --git a/dts/src/arm/am335x-moxa-uc-2100-common.dtsi b/dts/src/arm/am335x-moxa-uc-2100-common.dtsi index 92a0e98ec2..7b40ca9483 100644 --- a/dts/src/arm/am335x-moxa-uc-2100-common.dtsi +++ b/dts/src/arm/am335x-moxa-uc-2100-common.dtsi @@ -166,10 +166,8 @@ &buttons { pinctrl-names = "default"; pinctrl-0 = <&push_button_pins>; - #address-cells = <1>; - #size-cells = <0>; - button@0 { + button-0 { label = "push_button"; linux,code = <0x100>; gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/am335x-moxa-uc-8100-common.dtsi b/dts/src/arm/am335x-moxa-uc-8100-common.dtsi index e7e439a063..e0364adb83 100644 --- a/dts/src/arm/am335x-moxa-uc-8100-common.dtsi +++ b/dts/src/arm/am335x-moxa-uc-8100-common.dtsi @@ -378,10 +378,8 @@ &buttons { pinctrl-names = "default"; pinctrl-0 = <&push_button_pins>; - #address-cells = <1>; - #size-cells = <0>; - button@0 { + button-0 { label = "push_button"; linux,code = <0x100>; gpios = <&gpio3 21 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/am335x-pcm-953.dtsi b/dts/src/arm/am335x-pcm-953.dtsi index 124026fa0d..dae448040a 100644 --- a/dts/src/arm/am335x-pcm-953.dtsi +++ b/dts/src/arm/am335x-pcm-953.dtsi @@ -54,14 +54,14 @@ pinctrl-names = "default"; pinctrl-0 = <&user_buttons_pins>; - button@0 { + button-0 { label = "home"; linux,code = <KEY_HOME>; gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>; wakeup-source; }; - button@1 { + button-1 { label = "menu"; linux,code = <KEY_MENU>; gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>; diff --git a/dts/src/arm/am335x-pepper.dts b/dts/src/arm/am335x-pepper.dts index b5e88e627b..8691eec33b 100644 --- a/dts/src/arm/am335x-pepper.dts +++ b/dts/src/arm/am335x-pepper.dts @@ -596,24 +596,22 @@ &buttons { pinctrl-names = "default"; pinctrl-0 = <&user_buttons_pins>; - #address-cells = <1>; - #size-cells = <0>; - button0 { + button-0 { label = "home"; linux,code = <KEY_HOME>; gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; wakeup-source; }; - button1 { + button-1 { label = "menu"; linux,code = <KEY_MENU>; gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; wakeup-source; }; - buttons2 { + button-2 { label = "power"; linux,code = <KEY_POWER>; gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/am335x-sancloud-bbe-extended-wifi.dts b/dts/src/arm/am335x-sancloud-bbe-extended-wifi.dts index 246a1a9b3e..a2676d10c2 100644 --- a/dts/src/arm/am335x-sancloud-bbe-extended-wifi.dts +++ b/dts/src/arm/am335x-sancloud-bbe-extended-wifi.dts @@ -23,7 +23,7 @@ regulator-name = "wlan-en-regulator"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - startup-delay-us= <100000>; + startup-delay-us = <100000>; }; }; diff --git a/dts/src/arm/am335x-shc.dts b/dts/src/arm/am335x-shc.dts index 6b98775607..c497200f9c 100644 --- a/dts/src/arm/am335x-shc.dts +++ b/dts/src/arm/am335x-shc.dts @@ -36,10 +36,10 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - back_button { + back-button { label = "Back Button"; gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; linux,code = <KEY_BACK>; @@ -47,7 +47,7 @@ wakeup-source; }; - front_button { + front-button { label = "Front Button"; gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>; linux,code = <KEY_FRONT>; diff --git a/dts/src/arm/am33xx.dtsi b/dts/src/arm/am33xx.dtsi index 9a8698bd28..32d397b395 100644 --- a/dts/src/arm/am33xx.dtsi +++ b/dts/src/arm/am33xx.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for AM33XX SoC * * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/bus/ti-sysc.h> diff --git a/dts/src/arm/am3517-evm-ui.dtsi b/dts/src/arm/am3517-evm-ui.dtsi index 7d8f32bf70..75ad42179a 100644 --- a/dts/src/arm/am3517-evm-ui.dtsi +++ b/dts/src/arm/am3517-evm-ui.dtsi @@ -70,61 +70,61 @@ compatible = "gpio-keys-polled"; poll-interval = <100>; - record { + key-record { label = "Record"; /* linux,code = <BTN_0>; */ gpios = <&tca6416_2 15 GPIO_ACTIVE_LOW>; }; - play { + key-play { label = "Play"; linux,code = <KEY_PLAY>; gpios = <&tca6416_2 14 GPIO_ACTIVE_LOW>; }; - Stop { + key-stop { label = "Stop"; linux,code = <KEY_STOP>; gpios = <&tca6416_2 13 GPIO_ACTIVE_LOW>; }; - fwd { + key-fwd { label = "FWD"; linux,code = <KEY_FASTFORWARD>; gpios = <&tca6416_2 12 GPIO_ACTIVE_LOW>; }; - rwd { + key-rwd { label = "RWD"; linux,code = <KEY_REWIND>; gpios = <&tca6416_2 11 GPIO_ACTIVE_LOW>; }; - shift { + key-shift { label = "Shift"; linux,code = <KEY_LEFTSHIFT>; gpios = <&tca6416_2 10 GPIO_ACTIVE_LOW>; }; - Mode { + key-mode { label = "Mode"; linux,code = <BTN_MODE>; gpios = <&tca6416_2 9 GPIO_ACTIVE_LOW>; }; - Menu { + key-menu { label = "Menu"; linux,code = <KEY_MENU>; gpios = <&tca6416_2 8 GPIO_ACTIVE_LOW>; }; - Up { + key-up { label = "Up"; linux,code = <KEY_UP>; gpios = <&tca6416_2 7 GPIO_ACTIVE_LOW>; }; - Down { + key-down { label = "Down"; linux,code = <KEY_DOWN>; gpios = <&tca6416_2 6 GPIO_ACTIVE_LOW>; @@ -137,14 +137,14 @@ tlv320aic23_1: codec@1a { compatible = "ti,tlv320aic23"; reg = <0x1a>; - #sound-dai-cells= <0>; + #sound-dai-cells = <0>; status = "okay"; }; tlv320aic23_2: codec@1b { compatible = "ti,tlv320aic23"; reg = <0x1b>; - #sound-dai-cells= <0>; + #sound-dai-cells = <0>; status = "okay"; }; }; @@ -154,7 +154,7 @@ tlv320aic23_3: codec@1a { compatible = "ti,tlv320aic23"; reg = <0x1a>; - #sound-dai-cells= <0>; + #sound-dai-cells = <0>; status = "okay"; }; diff --git a/dts/src/arm/am3517-evm.dts b/dts/src/arm/am3517-evm.dts index c8b80f156e..35b653014f 100644 --- a/dts/src/arm/am3517-evm.dts +++ b/dts/src/arm/am3517-evm.dts @@ -37,55 +37,55 @@ compatible = "gpio-keys-polled"; poll-interval = <100>; - user_pb { + button-user { label = "User Push Button"; linux,code = <BTN_0>; gpios = <&tca6416 5 GPIO_ACTIVE_LOW>; }; - user_sw_1 { + switch-1 { label = "User Switch 1"; linux,code = <BTN_1>; gpios = <&tca6416 8 GPIO_ACTIVE_LOW>; }; - user_sw_2 { + switch-2 { label = "User Switch 2"; linux,code = <BTN_2>; gpios = <&tca6416 9 GPIO_ACTIVE_LOW>; }; - user_sw_3 { + switch-3 { label = "User Switch 3"; linux,code = <BTN_3>; gpios = <&tca6416 10 GPIO_ACTIVE_LOW>; }; - user_sw_4 { + switch-4 { label = "User Switch 4"; linux,code = <BTN_4>; gpios = <&tca6416 11 GPIO_ACTIVE_LOW>; }; - user_sw_5 { + switch-5 { label = "User Switch 5"; linux,code = <BTN_5>; gpios = <&tca6416 12 GPIO_ACTIVE_LOW>; }; - user_sw_6 { + switch-6 { label = "User Switch 6"; linux,code = <BTN_6>; gpios = <&tca6416 13 GPIO_ACTIVE_LOW>; }; - user_sw_7 { + switch-7 { label = "User Switch 7"; linux,code = <BTN_7>; gpios = <&tca6416 14 GPIO_ACTIVE_LOW>; }; - user_sw_8 { + switch-8 { label = "User Switch 8"; linux,code = <BTN_8>; gpios = <&tca6416 15 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/am3517.dtsi b/dts/src/arm/am3517.dtsi index de33c4f89f..cb316135bc 100644 --- a/dts/src/arm/am3517.dtsi +++ b/dts/src/arm/am3517.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for am3517 SoC * * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include "omap3.dtsi" diff --git a/dts/src/arm/am3874-iceboard.dts b/dts/src/arm/am3874-iceboard.dts index c9323d1df3..d039af8793 100644 --- a/dts/src/arm/am3874-iceboard.dts +++ b/dts/src/arm/am3874-iceboard.dts @@ -213,7 +213,7 @@ u48: pca9575@22 { compatible = "nxp,pca9575"; - reg=<0x22>; + reg = <0x22>; gpio-controller; #gpio-cells = <2>; @@ -232,7 +232,7 @@ u59: pca9575@23 { compatible = "nxp,pca9575"; - reg=<0x23>; + reg = <0x23>; gpio-controller; #gpio-cells = <2>; gpio-line-names = diff --git a/dts/src/arm/am4372.dtsi b/dts/src/arm/am4372.dtsi index 61a1d88f9d..8613355bbd 100644 --- a/dts/src/arm/am4372.dtsi +++ b/dts/src/arm/am4372.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for AM4372 SoC * * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/bus/ti-sysc.h> diff --git a/dts/src/arm/am437x-idk-evm.dts b/dts/src/arm/am437x-idk-evm.dts index 5a74b83145..123a95f875 100644 --- a/dts/src/arm/am437x-idk-evm.dts +++ b/dts/src/arm/am437x-idk-evm.dts @@ -98,14 +98,12 @@ vin-supply = <&v1_5dreg>; }; - gpio_keys: gpio_keys { + gpio_keys: gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&gpio_keys_pins_default>; - #address-cells = <1>; - #size-cells = <0>; - switch0 { + switch-0 { label = "power-button"; linux,code = <KEY_POWER>; gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/am437x-l4.dtsi b/dts/src/arm/am437x-l4.dtsi index 8f2268c027..415210b034 100644 --- a/dts/src/arm/am437x-l4.dtsi +++ b/dts/src/arm/am437x-l4.dtsi @@ -2407,7 +2407,7 @@ adc { #io-channel-cells = <1>; - compatible ="ti,am4372-adc"; + compatible = "ti,am4372-adc"; }; }; }; diff --git a/dts/src/arm/animeo_ip.dts b/dts/src/arm/animeo_ip.dts index 7da718abbd..29936bfbee 100644 --- a/dts/src/arm/animeo_ip.dts +++ b/dts/src/arm/animeo_ip.dts @@ -168,26 +168,24 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - keyswitch_in { + key-switch-in { label = "keyswitch_in"; gpios = <&pioB 1 GPIO_ACTIVE_HIGH>; linux,code = <28>; wakeup-source; }; - error_in { + key-error-in { label = "error_in"; gpios = <&pioB 2 GPIO_ACTIVE_HIGH>; linux,code = <29>; wakeup-source; }; - btn { + key-s { label = "btn"; gpios = <&pioC 23 GPIO_ACTIVE_HIGH>; linux,code = <31>; diff --git a/dts/src/arm/armada-370-c200-v2.dts b/dts/src/arm/armada-370-c200-v2.dts index 1a4a09bdde..84d40e1d70 100644 --- a/dts/src/arm/armada-370-c200-v2.dts +++ b/dts/src/arm/armada-370-c200-v2.dts @@ -75,25 +75,25 @@ pinctrl-0 = <&pmx_buttons>; pinctrl-names = "default"; - power { + button-power { label = "Power Button"; linux,code = <KEY_POWER>; gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>; }; - reset { + button-reset { label = "Reset Button"; linux,code = <KEY_RESTART>; gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; }; - usb1 { + button-usb1 { label = "USB1 Button"; linux,code = <BTN_0>; gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; }; - usb2 { + button-usb2 { label = "USB2 Button"; linux,code = <BTN_1>; gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/armada-370-rd.dts b/dts/src/arm/armada-370-rd.dts index c910d157a6..6ba7699b69 100644 --- a/dts/src/arm/armada-370-rd.dts +++ b/dts/src/arm/armada-370-rd.dts @@ -84,8 +84,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; button { label = "Software Button"; linux,code = <KEY_POWER>; diff --git a/dts/src/arm/armada-370-seagate-nas-xbay.dtsi b/dts/src/arm/armada-370-seagate-nas-xbay.dtsi index b52634ecf1..866b8630d4 100644 --- a/dts/src/arm/armada-370-seagate-nas-xbay.dtsi +++ b/dts/src/arm/armada-370-seagate-nas-xbay.dtsi @@ -108,22 +108,20 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - power { + button-power { label = "Power button"; linux,code = <KEY_POWER>; gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; debounce-interval = <100>; }; - backup { + button-backup { label = "Backup button"; linux,code = <KEY_OPTION>; gpios = <&gpio0 31 GPIO_ACTIVE_LOW>; debounce-interval = <100>; }; - reset { + button-reset { label = "Reset Button"; linux,code = <KEY_RESTART>; gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/armada-370-seagate-personal-cloud.dtsi b/dts/src/arm/armada-370-seagate-personal-cloud.dtsi index 0abac5ffe4..702a85af20 100644 --- a/dts/src/arm/armada-370-seagate-personal-cloud.dtsi +++ b/dts/src/arm/armada-370-seagate-personal-cloud.dtsi @@ -83,22 +83,20 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - power { + button-power { label = "Power button"; linux,code = <KEY_POWER>; gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>; debounce-interval = <100>; }; - reset { + button-reset { label = "Reset Button"; linux,code = <KEY_RESTART>; gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; debounce-interval = <100>; }; - button { + button-usb { label = "USB VBUS error"; linux,code = <KEY_UNKNOWN>; gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/armada-381-netgear-gs110emx.dts b/dts/src/arm/armada-381-netgear-gs110emx.dts index 396172067f..095df5567c 100644 --- a/dts/src/arm/armada-381-netgear-gs110emx.dts +++ b/dts/src/arm/armada-381-netgear-gs110emx.dts @@ -24,7 +24,7 @@ pinctrl-0 = <&front_button_pins>; pinctrl-names = "default"; - factory_default { + key-factory-default { label = "Factory Default"; gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; linux,code = <KEY_RESTART>; diff --git a/dts/src/arm/armada-385-clearfog-gtr.dtsi b/dts/src/arm/armada-385-clearfog-gtr.dtsi index 10ad46f293..d1452a04e9 100644 --- a/dts/src/arm/armada-385-clearfog-gtr.dtsi +++ b/dts/src/arm/armada-385-clearfog-gtr.dtsi @@ -256,14 +256,14 @@ pinctrl-0 = <&cf_gtr_rear_button_pins &cf_gtr_front_button_pins>; pinctrl-names = "default"; - button_0 { + button-0 { label = "Rear Button"; gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; linux,can-disable; linux,code = <BTN_0>; }; - button_1 { + button-1 { label = "Front Button"; gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; linux,can-disable; diff --git a/dts/src/arm/armada-385-linksys.dtsi b/dts/src/arm/armada-385-linksys.dtsi index fb9c8a0b24..116aca5e68 100644 --- a/dts/src/arm/armada-385-linksys.dtsi +++ b/dts/src/arm/armada-385-linksys.dtsi @@ -53,13 +53,13 @@ pinctrl-0 = <&gpio_keys_pins>; pinctrl-names = "default"; - wps { + button-wps { label = "WPS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; }; - reset { + button-reset { label = "Factory Reset Button"; linux,code = <KEY_RESTART>; gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/armada-385-turris-omnia.dts b/dts/src/arm/armada-385-turris-omnia.dts index f4878df397..d1e0db6e57 100644 --- a/dts/src/arm/armada-385-turris-omnia.dts +++ b/dts/src/arm/armada-385-turris-omnia.dts @@ -191,15 +191,13 @@ reg = <0x2b>; #address-cells = <1>; #size-cells = <0>; + status = "okay"; /* * LEDs are controlled by MCU (STM32F0) at * address 0x2b. * - * The driver does not support HW control mode - * for the LEDs yet. Disable the LEDs for now. - * - * Also LED functions are not stable yet: + * LED functions are not stable yet: * - there are 3 LEDs connected via MCU to PCIe * ports. One of these ports supports mSATA. * There is no mSATA nor PCIe function. @@ -210,7 +208,6 @@ * B. Again there is no such function defined. * For now we use LED_FUNCTION_INDICATOR */ - status = "disabled"; multi-led@0 { reg = <0x0>; @@ -397,7 +394,8 @@ phy1: ethernet-phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <1>; - marvell,reg-init = <3 18 0 0x4985>; + marvell,reg-init = <3 18 0 0x4985>, + <3 16 0xfff0 0x0001>; /* irq is connected to &pcawan pin 7 */ }; diff --git a/dts/src/arm/armada-388-clearfog-base.dts b/dts/src/arm/armada-388-clearfog-base.dts index 53b4bd3552..f7daa3bc70 100644 --- a/dts/src/arm/armada-388-clearfog-base.dts +++ b/dts/src/arm/armada-388-clearfog-base.dts @@ -19,7 +19,7 @@ pinctrl-0 = <&rear_button_pins>; pinctrl-names = "default"; - button_0 { + button-0 { /* The rear SW3 button */ label = "Rear Button"; gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/armada-388-clearfog.dts b/dts/src/arm/armada-388-clearfog.dts index 4140a5303b..95299167dc 100644 --- a/dts/src/arm/armada-388-clearfog.dts +++ b/dts/src/arm/armada-388-clearfog.dts @@ -35,7 +35,7 @@ pinctrl-0 = <&rear_button_pins>; pinctrl-names = "default"; - button_0 { + button-0 { /* The rear SW3 button */ label = "Rear Button"; gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/armada-xp-axpwifiap.dts b/dts/src/arm/armada-xp-axpwifiap.dts index 3e77b43378..5a74197be0 100644 --- a/dts/src/arm/armada-xp-axpwifiap.dts +++ b/dts/src/arm/armada-xp-axpwifiap.dts @@ -69,14 +69,12 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = <&keys_pin>; pinctrl-names = "default"; - reset { + button-reset { label = "Factory Reset Button"; linux,code = <KEY_SETUP>; gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/armada-xp-linksys-mamba.dts b/dts/src/arm/armada-xp-linksys-mamba.dts index 36932e3b78..622ac40dd1 100644 --- a/dts/src/arm/armada-xp-linksys-mamba.dts +++ b/dts/src/arm/armada-xp-linksys-mamba.dts @@ -172,20 +172,18 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = <&keys_pin>; pinctrl-names = "default"; - wps { + button-wps { label = "WPS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; }; - reset { + button-reset { label = "Factory Reset Button"; linux,code = <KEY_RESTART>; gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/armada-xp-openblocks-ax3-4.dts b/dts/src/arm/armada-xp-openblocks-ax3-4.dts index 0efcc166da..1ecf72a61b 100644 --- a/dts/src/arm/armada-xp-openblocks-ax3-4.dts +++ b/dts/src/arm/armada-xp-openblocks-ax3-4.dts @@ -97,12 +97,10 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - init { + button-init { label = "Init Button"; linux,code = <KEY_POWER>; gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; diff --git a/dts/src/arm/artpec6-devboard.dts b/dts/src/arm/artpec6-devboard.dts index d20d95359b..042a9cc920 100644 --- a/dts/src/arm/artpec6-devboard.dts +++ b/dts/src/arm/artpec6-devboard.dts @@ -1,10 +1,5 @@ -/* - * Axis ARTPEC-6 development board. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ +// SPDX-License-Identifier: GPL-2.0-only +// Axis ARTPEC-6 development board. /dts-v1/; #include "artpec6.dtsi" diff --git a/dts/src/arm/aspeed-ast2500-evb.dts b/dts/src/arm/aspeed-ast2500-evb.dts index 1d24b394ea..a497dd1354 100644 --- a/dts/src/arm/aspeed-ast2500-evb.dts +++ b/dts/src/arm/aspeed-ast2500-evb.dts @@ -5,7 +5,7 @@ / { model = "AST2500 EVB"; - compatible = "aspeed,ast2500"; + compatible = "aspeed,ast2500-evb", "aspeed,ast2500"; aliases { serial4 = &uart5; diff --git a/dts/src/arm/aspeed-ast2600-evb-a1.dts b/dts/src/arm/aspeed-ast2600-evb-a1.dts index dd7148060c..d0a5c2ff0f 100644 --- a/dts/src/arm/aspeed-ast2600-evb-a1.dts +++ b/dts/src/arm/aspeed-ast2600-evb-a1.dts @@ -5,6 +5,7 @@ / { model = "AST2600 A1 EVB"; + compatible = "aspeed,ast2600-evb-a1", "aspeed,ast2600"; /delete-node/regulator-vcc-sdhci0; /delete-node/regulator-vcc-sdhci1; diff --git a/dts/src/arm/aspeed-ast2600-evb.dts b/dts/src/arm/aspeed-ast2600-evb.dts index 5a6063bd45..c698e65382 100644 --- a/dts/src/arm/aspeed-ast2600-evb.dts +++ b/dts/src/arm/aspeed-ast2600-evb.dts @@ -8,7 +8,7 @@ / { model = "AST2600 EVB"; - compatible = "aspeed,ast2600"; + compatible = "aspeed,ast2600-evb-a1", "aspeed,ast2600"; aliases { serial4 = &uart5; diff --git a/dts/src/arm/aspeed-bmc-ampere-mtjade.dts b/dts/src/arm/aspeed-bmc-ampere-mtjade.dts index 1b2e7ad375..82a6f14a45 100644 --- a/dts/src/arm/aspeed-bmc-ampere-mtjade.dts +++ b/dts/src/arm/aspeed-bmc-ampere-mtjade.dts @@ -100,91 +100,91 @@ gpio-keys { compatible = "gpio-keys"; - shutdown_ack { + event-shutdown-ack { label = "SHUTDOWN_ACK"; gpios = <&gpio ASPEED_GPIO(G, 2) GPIO_ACTIVE_LOW>; linux,code = <ASPEED_GPIO(G, 2)>; }; - reboot_ack { + event-reboot-ack { label = "REBOOT_ACK"; gpios = <&gpio ASPEED_GPIO(J, 3) GPIO_ACTIVE_LOW>; linux,code = <ASPEED_GPIO(J, 3)>; }; - S0_overtemp { + event-s0-overtemp { label = "S0_OVERTEMP"; gpios = <&gpio ASPEED_GPIO(G, 3) GPIO_ACTIVE_LOW>; linux,code = <ASPEED_GPIO(G, 3)>; }; - S0_hightemp { + event-s0-hightemp { label = "S0_HIGHTEMP"; gpios = <&gpio ASPEED_GPIO(J, 0) GPIO_ACTIVE_LOW>; linux,code = <ASPEED_GPIO(J, 0)>; }; - S0_cpu_fault { + event-s0-cpu-fault { label = "S0_CPU_FAULT"; gpios = <&gpio ASPEED_GPIO(J, 1) GPIO_ACTIVE_HIGH>; linux,code = <ASPEED_GPIO(J, 1)>; }; - S0_scp_auth_fail { + event-s0-scp-auth-fail { label = "S0_SCP_AUTH_FAIL"; gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>; linux,code = <ASPEED_GPIO(J, 2)>; }; - S1_scp_auth_fail { + event-s1-scp-auth-fail { label = "S1_SCP_AUTH_FAIL"; gpios = <&gpio ASPEED_GPIO(Z, 5) GPIO_ACTIVE_LOW>; linux,code = <ASPEED_GPIO(Z, 5)>; }; - S1_overtemp { + event-s1-overtemp { label = "S1_OVERTEMP"; gpios = <&gpio ASPEED_GPIO(Z, 6) GPIO_ACTIVE_LOW>; linux,code = <ASPEED_GPIO(Z, 6)>; }; - S1_hightemp { + event-s1-hightemp { label = "S1_HIGHTEMP"; gpios = <&gpio ASPEED_GPIO(AB, 0) GPIO_ACTIVE_LOW>; linux,code = <ASPEED_GPIO(AB, 0)>; }; - S1_cpu_fault { + event-s1-cpu-fault { label = "S1_CPU_FAULT"; gpios = <&gpio ASPEED_GPIO(Z, 1) GPIO_ACTIVE_HIGH>; linux,code = <ASPEED_GPIO(Z, 1)>; }; - id_button { + event-id { label = "ID_BUTTON"; gpios = <&gpio ASPEED_GPIO(Q, 5) GPIO_ACTIVE_LOW>; linux,code = <ASPEED_GPIO(Q, 5)>; }; - psu1_vin_good { + event-psu1-vin-good { label = "PSU1_VIN_GOOD"; gpios = <&gpio ASPEED_GPIO(H, 4) GPIO_ACTIVE_LOW>; linux,code = <ASPEED_GPIO(H, 4)>; }; - psu2_vin_good { + event-psu2-vin-good { label = "PSU2_VIN_GOOD"; gpios = <&gpio ASPEED_GPIO(H, 5) GPIO_ACTIVE_LOW>; linux,code = <ASPEED_GPIO(H, 5)>; }; - psu1_present { + event-psu1-present { label = "PSU1_PRESENT"; gpios = <&gpio ASPEED_GPIO(I, 0) GPIO_ACTIVE_LOW>; linux,code = <ASPEED_GPIO(I, 0)>; }; - psu2_present { + event-psu2-present { label = "PSU2_PRESENT"; gpios = <&gpio ASPEED_GPIO(I, 1) GPIO_ACTIVE_LOW>; linux,code = <ASPEED_GPIO(I, 1)>; diff --git a/dts/src/arm/aspeed-bmc-arm-centriq2400-rep.dts b/dts/src/arm/aspeed-bmc-arm-centriq2400-rep.dts deleted file mode 100644 index 3395de96ee..0000000000 --- a/dts/src/arm/aspeed-bmc-arm-centriq2400-rep.dts +++ /dev/null @@ -1,225 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/dts-v1/; - -#include "aspeed-g5.dtsi" -#include <dt-bindings/gpio/aspeed-gpio.h> - -/ { - model = "Qualcomm Centriq 2400 REP AST2520"; - compatible = "qualcomm,centriq2400-rep-bmc", "aspeed,ast2500"; - - chosen { - stdout-path = &uart5; - bootargs = "console=ttyS4,115200 earlycon"; - }; - - memory@80000000 { - reg = <0x80000000 0x40000000>; - }; - - iio-hwmon { - compatible = "iio-hwmon"; - io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, - <&adc 4>, <&adc 5>, <&adc 6>, <&adc 8>; - }; - - iio-hwmon-battery { - compatible = "iio-hwmon"; - io-channels = <&adc 7>; - }; - - leds { - compatible = "gpio-leds"; - - uid_led { - label = "UID_LED"; - gpios = <&gpio ASPEED_GPIO(Q, 5) GPIO_ACTIVE_LOW>; - }; - - ras_error_led { - label = "RAS_ERROR_LED"; - gpios = <&gpio ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>; - }; - - system_fault { - label = "System_fault"; - gpios = <&gpio ASPEED_GPIO(A, 1) GPIO_ACTIVE_LOW>; - }; - }; -}; - -&fmc { - status = "okay"; - flash@0 { - status = "okay"; - m25p,fast-read; - label = "bmc"; -#include "openbmc-flash-layout.dtsi" - }; -}; - -&spi1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_spi1_default>; - flash@0 { - status = "okay"; - }; -}; - -&spi2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_spi2ck_default - &pinctrl_spi2miso_default - &pinctrl_spi2mosi_default - &pinctrl_spi2cs0_default>; -}; - -&uart3 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>; - current-speed = <115200>; -}; - -&uart5 { - status = "okay"; -}; - -&mac0 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>; -}; - -&i2c0 { - status = "okay"; -}; - -&i2c1 { - status = "okay"; - - tmp421@1e { - compatible = "ti,tmp421"; - reg = <0x1e>; - }; - tmp421@2a { - compatible = "ti,tmp421"; - reg = <0x2a>; - }; - tmp421@4e { - compatible = "ti,tmp421"; - reg = <0x4e>; - }; - tmp421@1c { - compatible = "ti,tmp421"; - reg = <0x1c>; - }; -}; - -&i2c2 { - status = "okay"; -}; - -&i2c3 { - status = "okay"; -}; - -&i2c4 { - status = "okay"; -}; - -&i2c5 { - status = "okay"; -}; - -&i2c6 { - status = "okay"; - - tmp421@1d { - compatible = "ti,tmp421"; - reg = <0x1d>; - }; - tmp421@1f { - compatible = "ti,tmp421"; - reg = <0x1f>; - }; - tmp421@4d { - compatible = "ti,tmp421"; - reg = <0x4d>; - }; - tmp421@4f { - compatible = "ti,tmp421"; - reg = <0x4f>; - }; - nvt210@4c { - compatible = "nvt210"; - reg = <0x4c>; - }; - eeprom@50 { - compatible = "atmel,24c128"; - reg = <0x50>; - pagesize = <128>; - }; -}; - -&i2c7 { - status = "okay"; -}; - -&i2c8 { - status = "okay"; - - pca9641@70 { - compatible = "nxp,pca9641"; - reg = <0x70>; - i2c-arb { - #address-cells = <1>; - #size-cells = <0>; - tmp421@1d { - compatible = "tmp421"; - reg = <0x1d>; - }; - adm1278@12 { - compatible = "adi,adm1278"; - reg = <0x12>; - Rsense = <500>; - }; - eeprom@50 { - compatible = "atmel,24c02"; - reg = <0x50>; - }; - ds1100@58 { - compatible = "ds1100"; - reg = <0x58>; - }; - }; - }; -}; - -&i2c9 { - status = "okay"; -}; - -&vuart { - status = "okay"; -}; - -&gfx { - status = "okay"; -}; - -&pinctrl { - aspeed,external-nodes = <&gfx &lhc>; -}; - -&gpio { - pin_gpio_c7 { - gpio-hog; - gpios = <ASPEED_GPIO(C, 7) GPIO_ACTIVE_HIGH>; - output; - line-name = "BIOS_SPI_MUX_S"; - }; -}; diff --git a/dts/src/arm/aspeed-bmc-bytedance-g220a.dts b/dts/src/arm/aspeed-bmc-bytedance-g220a.dts index 0d1fb5ccfd..f75cad41ae 100644 --- a/dts/src/arm/aspeed-bmc-bytedance-g220a.dts +++ b/dts/src/arm/aspeed-bmc-bytedance-g220a.dts @@ -100,7 +100,7 @@ gpio-keys { compatible = "gpio-keys"; - burn-in-signal { + event-burn-in-signal { label = "burn-in"; gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>; linux,code = <ASPEED_GPIO(R, 5)>; @@ -111,139 +111,139 @@ compatible = "gpio-keys-polled"; poll-interval = <1000>; - rear-riser1-presence { + event-rear-riser1-presence { label = "rear-riser1-presence"; gpios = <&pca0 1 GPIO_ACTIVE_LOW>; linux,code = <1>; }; - alrt-pvddq-cpu0 { + event-alrt-pvddq-cpu0 { label = "alrt-pvddq-cpu0"; gpios = <&pca0 8 GPIO_ACTIVE_LOW>; linux,code = <2>; }; - rear-riser0-presence { + event-rear-riser0-presence { label = "rear-riser0-presence"; gpios = <&pca0 9 GPIO_ACTIVE_LOW>; linux,code = <3>; }; - fault-pvddq-cpu0 { + event-fault-pvddq-cpu0 { label = "fault-pvddq-cpu0"; gpios = <&pca0 10 GPIO_ACTIVE_LOW>; linux,code = <4>; }; - alrt-pvddq-cpu1 { + event-alrt-pvddq-cpu1 { label = "alrt-pvddq-cpu1"; gpios = <&pca0 11 GPIO_ACTIVE_LOW>; linux,code = <5>; }; - fault-pvddq-cpu1 { + event-fault-pvddq-cpu1 { label = "alrt-pvddq-cpu1"; gpios = <&pca0 12 GPIO_ACTIVE_LOW>; linux,code = <6>; }; - fault-pvccin-cpu1 { + event-fault-pvccin-cpu1 { label = "fault-pvccin-cpuq"; gpios = <&pca0 13 GPIO_ACTIVE_LOW>; linux,code = <7>; }; - bmc-rom0-wp { + event-bmc-rom0-wp { label = "bmc-rom0-wp"; gpios = <&pca1 0 GPIO_ACTIVE_LOW>; linux,code = <8>; }; - bmc-rom1-wp { + event-bmc-rom1-wp { label = "bmc-rom1-wp"; gpios = <&pca1 1 GPIO_ACTIVE_LOW>; linux,code = <9>; }; - fan0-presence { + event-fan0-presence { label = "fan0-presence"; gpios = <&pca1 2 GPIO_ACTIVE_LOW>; linux,code = <10>; }; - fan1-presence { + event-fan1-presence { label = "fan1-presence"; gpios = <&pca1 3 GPIO_ACTIVE_LOW>; linux,code = <11>; }; - fan2-presence { + event-fan2-presence { label = "fan2-presence"; gpios = <&pca1 4 GPIO_ACTIVE_LOW>; linux,code = <12>; }; - fan3-presence { + event-fan3-presence { label = "fan3-presence"; gpios = <&pca1 5 GPIO_ACTIVE_LOW>; linux,code = <13>; }; - fan4-presence { + event-fan4-presence { label = "fan4-presence"; gpios = <&pca1 6 GPIO_ACTIVE_LOW>; linux,code = <14>; }; - fan5-presence { + event-fan5-presence { label = "fan5-presence"; gpios = <&pca1 7 GPIO_ACTIVE_LOW>; linux,code = <15>; }; - front-bp1-presence { + event-front-bp1-presence { label = "front-bp1-presence"; gpios = <&pca1 8 GPIO_ACTIVE_LOW>; linux,code = <16>; }; - rear-bp-presence { + event-rear-bp-presence { label = "rear-bp-presence"; gpios = <&pca1 9 GPIO_ACTIVE_LOW>; linux,code = <17>; }; - fault-pvccin-cpu0 { + event-fault-pvccin-cpu0 { label = "fault-pvccin-cpu0"; gpios = <&pca1 10 GPIO_ACTIVE_LOW>; linux,code = <18>; }; - alrt-p1v05-pvcc { + event-alrt-p1v05-pvcc { label = "alrt-p1v05-pvcc1"; gpios = <&pca1 11 GPIO_ACTIVE_LOW>; linux,code = <19>; }; - fault-p1v05-pvccio { + event-fault-p1v05-pvccio { label = "alrt-p1v05-pvcc1"; gpios = <&pca1 12 GPIO_ACTIVE_LOW>; linux,code = <20>; }; - alrt-p1v8-pvccio { + event-alrt-p1v8-pvccio { label = "alrt-p1v8-pvccio"; gpios = <&pca1 13 GPIO_ACTIVE_LOW>; linux,code = <21>; }; - fault-p1v8-pvccio { + event-fault-p1v8-pvccio { label = "fault-p1v8-pvccio"; gpios = <&pca1 14 GPIO_ACTIVE_LOW>; linux,code = <22>; }; - front-bp0-presence { + event-front-bp0-presence { label = "front-bp0-presence"; gpios = <&pca1 15 GPIO_ACTIVE_LOW>; linux,code = <23>; diff --git a/dts/src/arm/aspeed-bmc-ibm-everest.dts b/dts/src/arm/aspeed-bmc-ibm-everest.dts index 382da7934e..a6a2bc3b85 100644 --- a/dts/src/arm/aspeed-bmc-ibm-everest.dts +++ b/dts/src/arm/aspeed-bmc-ibm-everest.dts @@ -189,29 +189,27 @@ gpio-keys-polled { compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <1000>; - fan0-presence { + event-fan0-presence { label = "fan0-presence"; gpios = <&pca0 15 GPIO_ACTIVE_LOW>; linux,code = <15>; }; - fan1-presence { + event-fan1-presence { label = "fan1-presence"; gpios = <&pca0 14 GPIO_ACTIVE_LOW>; linux,code = <14>; }; - fan2-presence { + event-fan2-presence { label = "fan2-presence"; gpios = <&pca0 13 GPIO_ACTIVE_LOW>; linux,code = <13>; }; - fan3-presence { + event-fan3-presence { label = "fan3-presence"; gpios = <&pca0 12 GPIO_ACTIVE_LOW>; linux,code = <12>; diff --git a/dts/src/arm/aspeed-bmc-ibm-rainier.dts b/dts/src/arm/aspeed-bmc-ibm-rainier.dts index 7213434695..bf59a99623 100644 --- a/dts/src/arm/aspeed-bmc-ibm-rainier.dts +++ b/dts/src/arm/aspeed-bmc-ibm-rainier.dts @@ -179,41 +179,39 @@ gpio-keys-polled { compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <1000>; - fan0-presence { + event-fan0-presence { label = "fan0-presence"; gpios = <&pca0 6 GPIO_ACTIVE_LOW>; linux,code = <6>; }; - fan1-presence { + event-fan1-presence { label = "fan1-presence"; gpios = <&pca0 7 GPIO_ACTIVE_LOW>; linux,code = <7>; }; - fan2-presence { + event-fan2-presence { label = "fan2-presence"; gpios = <&pca0 8 GPIO_ACTIVE_LOW>; linux,code = <8>; }; - fan3-presence { + event-fan3-presence { label = "fan3-presence"; gpios = <&pca0 9 GPIO_ACTIVE_LOW>; linux,code = <9>; }; - fan4-presence { + event-fan4-presence { label = "fan4-presence"; gpios = <&pca0 10 GPIO_ACTIVE_LOW>; linux,code = <10>; }; - fan5-presence { + event-fan5-presence { label = "fan5-presence"; gpios = <&pca0 11 GPIO_ACTIVE_LOW>; linux,code = <11>; diff --git a/dts/src/arm/aspeed-bmc-inspur-fp5280g2.dts b/dts/src/arm/aspeed-bmc-inspur-fp5280g2.dts index 60a39ea10a..208b0f094e 100644 --- a/dts/src/arm/aspeed-bmc-inspur-fp5280g2.dts +++ b/dts/src/arm/aspeed-bmc-inspur-fp5280g2.dts @@ -73,19 +73,19 @@ gpio-keys { compatible = "gpio-keys"; - checkstop { + event-checkstop { label = "checkstop"; gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_LOW>; linux,code = <ASPEED_GPIO(B, 3)>; }; - ps0-presence { + event-ps0-presence { label = "ps0-presence"; gpios = <&gpio ASPEED_GPIO(F, 0) GPIO_ACTIVE_LOW>; linux,code = <ASPEED_GPIO(F, 0)>; }; - ps1-presence { + event-ps1-presence { label = "ps1-presence"; gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>; linux,code = <ASPEED_GPIO(F, 1)>; @@ -97,49 +97,49 @@ compatible = "gpio-keys-polled"; poll-interval = <1000>; - fan0-presence { + event-fan0-presence { label = "fan0-presence"; gpios = <&pca1 0 GPIO_ACTIVE_LOW>; linux,code = <1>; }; - fan1-presence { + event-fan1-presence { label = "fan1-presence"; gpios = <&pca1 1 GPIO_ACTIVE_LOW>; linux,code = <2>; }; - fan2-presence { + event-fan2-presence { label = "fan2-presence"; gpios = <&pca1 2 GPIO_ACTIVE_LOW>; linux,code = <3>; }; - fan3-presence { + event-fan3-presence { label = "fan3-presence"; gpios = <&pca1 3 GPIO_ACTIVE_LOW>; linux,code = <4>; }; - fan4-presence { + event-fan4-presence { label = "fan4-presence"; gpios = <&pca1 4 GPIO_ACTIVE_LOW>; linux,code = <5>; }; - fan5-presence { + event-fan5-presence { label = "fan5-presence"; gpios = <&pca1 5 GPIO_ACTIVE_LOW>; linux,code = <6>; }; - fan6-presence { + event-fan6-presence { label = "fan6-presence"; gpios = <&pca1 6 GPIO_ACTIVE_LOW>; linux,code = <7>; }; - fan7-presence { + event-fan7-presence { label = "fan7-presence"; gpios = <&pca1 7 GPIO_ACTIVE_LOW>; linux,code = <8>; diff --git a/dts/src/arm/aspeed-bmc-opp-mihawk.dts b/dts/src/arm/aspeed-bmc-opp-mihawk.dts index a52a289cee..48776fb663 100644 --- a/dts/src/arm/aspeed-bmc-opp-mihawk.dts +++ b/dts/src/arm/aspeed-bmc-opp-mihawk.dts @@ -92,30 +92,31 @@ gpio-keys { compatible = "gpio-keys"; - air-water { + event-air-water { label = "air-water"; gpios = <&gpio ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>; linux,code = <ASPEED_GPIO(F, 6)>; }; - checkstop { + event-checkstop { label = "checkstop"; gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>; linux,code = <ASPEED_GPIO(J, 2)>; }; - ps0-presence { + event-ps0-presence { label = "ps0-presence"; gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>; linux,code = <ASPEED_GPIO(Z, 2)>; }; - ps1-presence { + event-ps1-presence { label = "ps1-presence"; gpios = <&gpio ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>; linux,code = <ASPEED_GPIO(Z, 0)>; }; - id-button { + + button-id { label = "id-button"; gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>; linux,code = <ASPEED_GPIO(F, 1)>; @@ -126,37 +127,37 @@ compatible = "gpio-keys-polled"; poll-interval = <1000>; - fan0-presence { + event-fan0-presence { label = "fan0-presence"; gpios = <&pca9552 9 GPIO_ACTIVE_LOW>; linux,code = <9>; }; - fan1-presence { + event-fan1-presence { label = "fan1-presence"; gpios = <&pca9552 10 GPIO_ACTIVE_LOW>; linux,code = <10>; }; - fan2-presence { + event-fan2-presence { label = "fan2-presence"; gpios = <&pca9552 11 GPIO_ACTIVE_LOW>; linux,code = <11>; }; - fan3-presence { + event-fan3-presence { label = "fan3-presence"; gpios = <&pca9552 12 GPIO_ACTIVE_LOW>; linux,code = <12>; }; - fan4-presence { + event-fan4-presence { label = "fan4-presence"; gpios = <&pca9552 13 GPIO_ACTIVE_LOW>; linux,code = <13>; }; - fan5-presence { + event-fan5-presence { label = "fan5-presence"; gpios = <&pca9552 14 GPIO_ACTIVE_LOW>; linux,code = <14>; diff --git a/dts/src/arm/aspeed-bmc-opp-mowgli.dts b/dts/src/arm/aspeed-bmc-opp-mowgli.dts index 7d38d121ec..31ff19ef87 100644 --- a/dts/src/arm/aspeed-bmc-opp-mowgli.dts +++ b/dts/src/arm/aspeed-bmc-opp-mowgli.dts @@ -46,31 +46,31 @@ gpio-keys { compatible = "gpio-keys"; - air-water { + event-air-water { label = "air-water"; gpios = <&gpio ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>; linux,code = <ASPEED_GPIO(F, 6)>; }; - checkstop { + event-checkstop { label = "checkstop"; gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>; linux,code = <ASPEED_GPIO(J, 2)>; }; - ps0-presence { + event-ps0-presence { label = "ps0-presence"; gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>; linux,code = <ASPEED_GPIO(Z, 2)>; }; - ps1-presence { + event-ps1-presence { label = "ps1-presence"; gpios = <&gpio ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>; linux,code = <ASPEED_GPIO(Z, 0)>; }; - id-button { + button-id { label = "id-button"; gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>; linux,code = <ASPEED_GPIO(F, 1)>; @@ -81,31 +81,31 @@ compatible = "gpio-keys-polled"; poll-interval = <1000>; - fan0-presence { + event-fan0-presence { label = "fan0-presence"; gpios = <&pca9552 9 GPIO_ACTIVE_LOW>; linux,code = <9>; }; - fan1-presence { + event-fan1-presence { label = "fan1-presence"; gpios = <&pca9552 10 GPIO_ACTIVE_LOW>; linux,code = <10>; }; - fan2-presence { + event-fan2-presence { label = "fan2-presence"; gpios = <&pca9552 11 GPIO_ACTIVE_LOW>; linux,code = <11>; }; - fan3-presence { + event-fan3-presence { label = "fan3-presence"; gpios = <&pca9552 12 GPIO_ACTIVE_LOW>; linux,code = <12>; }; - fan4-presence { + event-fan4-presence { label = "fan4-presence"; gpios = <&pca9552 13 GPIO_ACTIVE_LOW>; linux,code = <13>; diff --git a/dts/src/arm/aspeed-bmc-opp-nicole.dts b/dts/src/arm/aspeed-bmc-opp-nicole.dts index 3d4bdad27c..ac0d666ca1 100644 --- a/dts/src/arm/aspeed-bmc-opp-nicole.dts +++ b/dts/src/arm/aspeed-bmc-opp-nicole.dts @@ -96,7 +96,7 @@ gpio-keys { compatible = "gpio-keys"; - checkstop { + event-checkstop { label = "checkstop"; gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>; linux,code = <ASPEED_GPIO(J, 2)>; diff --git a/dts/src/arm/aspeed-bmc-opp-palmetto.dts b/dts/src/arm/aspeed-bmc-opp-palmetto.dts index cd660c1ff3..45631b47a7 100644 --- a/dts/src/arm/aspeed-bmc-opp-palmetto.dts +++ b/dts/src/arm/aspeed-bmc-opp-palmetto.dts @@ -73,7 +73,7 @@ gpio-keys { compatible = "gpio-keys"; - checkstop { + event-checkstop { label = "checkstop"; gpios = <&gpio ASPEED_GPIO(P, 5) GPIO_ACTIVE_LOW>; linux,code = <ASPEED_GPIO(P, 5)>; diff --git a/dts/src/arm/aspeed-bmc-opp-romulus.dts b/dts/src/arm/aspeed-bmc-opp-romulus.dts index 084f54866f..893e621eca 100644 --- a/dts/src/arm/aspeed-bmc-opp-romulus.dts +++ b/dts/src/arm/aspeed-bmc-opp-romulus.dts @@ -87,7 +87,7 @@ gpio-keys { compatible = "gpio-keys"; - checkstop { + event-checkstop { label = "checkstop"; gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>; linux,code = <ASPEED_GPIO(J, 2)>; diff --git a/dts/src/arm/aspeed-bmc-opp-swift.dts b/dts/src/arm/aspeed-bmc-opp-swift.dts index 4816486c0c..bbf864f84d 100644 --- a/dts/src/arm/aspeed-bmc-opp-swift.dts +++ b/dts/src/arm/aspeed-bmc-opp-swift.dts @@ -38,37 +38,37 @@ gpio-keys { compatible = "gpio-keys"; - air-water { + event-air-water { label = "air-water"; gpios = <&gpio ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>; linux,code = <ASPEED_GPIO(B, 5)>; }; - checkstop { + event-checkstop { label = "checkstop"; gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>; linux,code = <ASPEED_GPIO(J, 2)>; }; - ps0-presence { + event-ps0-presence { label = "ps0-presence"; gpios = <&gpio ASPEED_GPIO(R, 7) GPIO_ACTIVE_LOW>; linux,code = <ASPEED_GPIO(R, 7)>; }; - ps1-presence { + event-ps1-presence { label = "ps1-presence"; gpios = <&gpio ASPEED_GPIO(N, 0) GPIO_ACTIVE_LOW>; linux,code = <ASPEED_GPIO(N, 0)>; }; - oppanel-presence { + event-oppanel-presence { label = "oppanel-presence"; gpios = <&gpio ASPEED_GPIO(A, 7) GPIO_ACTIVE_LOW>; linux,code = <ASPEED_GPIO(A, 7)>; }; - opencapi-riser-presence { + event-opencapi-riser-presence { label = "opencapi-riser-presence"; gpios = <&gpio ASPEED_GPIO(I, 0) GPIO_ACTIVE_LOW>; linux,code = <ASPEED_GPIO(I, 0)>; @@ -84,55 +84,55 @@ compatible = "gpio-keys-polled"; poll-interval = <1000>; - scm0-presence { + event-scm0-presence { label = "scm0-presence"; gpios = <&pca9552 6 GPIO_ACTIVE_LOW>; linux,code = <6>; }; - scm1-presence { + event-scm1-presence { label = "scm1-presence"; gpios = <&pca9552 7 GPIO_ACTIVE_LOW>; linux,code = <7>; }; - cpu0vrm-presence { + event-cpu0vrm-presence { label = "cpu0vrm-presence"; gpios = <&pca9552 12 GPIO_ACTIVE_LOW>; linux,code = <12>; }; - cpu1vrm-presence { + event-cpu1vrm-presence { label = "cpu1vrm-presence"; gpios = <&pca9552 13 GPIO_ACTIVE_LOW>; linux,code = <13>; }; - fan0-presence { + event-fan0-presence { label = "fan0-presence"; gpios = <&pca0 5 GPIO_ACTIVE_LOW>; linux,code = <5>; }; - fan1-presence { + event-fan1-presence { label = "fan1-presence"; gpios = <&pca0 6 GPIO_ACTIVE_LOW>; linux,code = <6>; }; - fan2-presence { + event-fan2-presence { label = "fan2-presence"; gpios = <&pca0 7 GPIO_ACTIVE_LOW>; linux,code = <7>; }; - fan3-presence { + event-fan3-presence { label = "fan3-presence"; gpios = <&pca0 8 GPIO_ACTIVE_LOW>; linux,code = <8>; }; - fanboost-presence { + event-fanboost-presence { label = "fanboost-presence"; gpios = <&pca0 9 GPIO_ACTIVE_LOW>; linux,code = <9>; diff --git a/dts/src/arm/aspeed-bmc-opp-tacoma.dts b/dts/src/arm/aspeed-bmc-opp-tacoma.dts index 72b7a6639e..3f6010ef2b 100644 --- a/dts/src/arm/aspeed-bmc-opp-tacoma.dts +++ b/dts/src/arm/aspeed-bmc-opp-tacoma.dts @@ -50,13 +50,13 @@ gpio-keys { compatible = "gpio-keys"; - ps0-presence { + event-ps0-presence { label = "ps0-presence"; gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>; linux,code = <ASPEED_GPIO(H, 3)>; }; - ps1-presence { + event-ps1-presence { label = "ps1-presence"; gpios = <&gpio0 ASPEED_GPIO(E, 5) GPIO_ACTIVE_LOW>; linux,code = <ASPEED_GPIO(E, 5)>; @@ -65,29 +65,27 @@ gpio-keys-polled { compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <1000>; - fan0-presence { + event-fan0-presence { label = "fan0-presence"; gpios = <&pca0 4 GPIO_ACTIVE_LOW>; linux,code = <4>; }; - fan1-presence { + event-fan1-presence { label = "fan1-presence"; gpios = <&pca0 5 GPIO_ACTIVE_LOW>; linux,code = <5>; }; - fan2-presence { + event-fan2-presence { label = "fan2-presence"; gpios = <&pca0 6 GPIO_ACTIVE_LOW>; linux,code = <6>; }; - fan3-presence { + event-fan3-presence { label = "fan3-presence"; gpios = <&pca0 7 GPIO_ACTIVE_LOW>; linux,code = <7>; diff --git a/dts/src/arm/aspeed-bmc-opp-vesnin.dts b/dts/src/arm/aspeed-bmc-opp-vesnin.dts index 328ef472c4..8a7fb55ab4 100644 --- a/dts/src/arm/aspeed-bmc-opp-vesnin.dts +++ b/dts/src/arm/aspeed-bmc-opp-vesnin.dts @@ -63,13 +63,13 @@ gpio-keys { compatible = "gpio-keys"; - button_checkstop { + event-checkstop { label = "checkstop"; linux,code = <74>; gpios = <&gpio ASPEED_GPIO(P, 5) GPIO_ACTIVE_LOW>; }; - button_identify { + event-identify { label = "identify"; linux,code = <152>; gpios = <&gpio ASPEED_GPIO(O, 7) GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/aspeed-bmc-opp-witherspoon.dts b/dts/src/arm/aspeed-bmc-opp-witherspoon.dts index 230f3584bc..a20a532fc2 100644 --- a/dts/src/arm/aspeed-bmc-opp-witherspoon.dts +++ b/dts/src/arm/aspeed-bmc-opp-witherspoon.dts @@ -51,25 +51,25 @@ gpio-keys { compatible = "gpio-keys"; - air-water { + event-air-water { label = "air-water"; gpios = <&gpio ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>; linux,code = <ASPEED_GPIO(B, 5)>; }; - checkstop { + event-checkstop { label = "checkstop"; gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>; linux,code = <ASPEED_GPIO(J, 2)>; }; - ps0-presence { + event-ps0-presence { label = "ps0-presence"; gpios = <&gpio ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>; linux,code = <ASPEED_GPIO(P, 7)>; }; - ps1-presence { + event-ps1-presence { label = "ps1-presence"; gpios = <&gpio ASPEED_GPIO(N, 0) GPIO_ACTIVE_LOW>; linux,code = <ASPEED_GPIO(N, 0)>; @@ -85,25 +85,25 @@ compatible = "gpio-keys-polled"; poll-interval = <1000>; - fan0-presence { + event-fan0-presence { label = "fan0-presence"; gpios = <&pca0 4 GPIO_ACTIVE_LOW>; linux,code = <4>; }; - fan1-presence { + event-fan1-presence { label = "fan1-presence"; gpios = <&pca0 5 GPIO_ACTIVE_LOW>; linux,code = <5>; }; - fan2-presence { + event-fan2-presence { label = "fan2-presence"; gpios = <&pca0 6 GPIO_ACTIVE_LOW>; linux,code = <6>; }; - fan3-presence { + event-fan3-presence { label = "fan3-presence"; gpios = <&pca0 7 GPIO_ACTIVE_LOW>; linux,code = <7>; diff --git a/dts/src/arm/aspeed-bmc-opp-zaius.dts b/dts/src/arm/aspeed-bmc-opp-zaius.dts index 7ae4ea0d29..0cb7b20ff3 100644 --- a/dts/src/arm/aspeed-bmc-opp-zaius.dts +++ b/dts/src/arm/aspeed-bmc-opp-zaius.dts @@ -58,13 +58,13 @@ gpio-keys { compatible = "gpio-keys"; - checkstop { + event-checkstop { label = "checkstop"; gpios = <&gpio ASPEED_GPIO(F, 7) GPIO_ACTIVE_LOW>; linux,code = <ASPEED_GPIO(F, 7)>; }; - pcie-e2b-present{ + event-pcie-e2b-present{ label = "pcie-e2b-present"; gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>; linux,code = <ASPEED_GPIO(E, 7)>; diff --git a/dts/src/arm/aspeed-bmc-portwell-neptune.dts b/dts/src/arm/aspeed-bmc-portwell-neptune.dts index 61bc74b423..a5e64ccc2b 100644 --- a/dts/src/arm/aspeed-bmc-portwell-neptune.dts +++ b/dts/src/arm/aspeed-bmc-portwell-neptune.dts @@ -24,17 +24,17 @@ leds { compatible = "gpio-leds"; postcode0 { - label="BMC_UP"; + label = "BMC_UP"; gpios = <&gpio ASPEED_GPIO(H, 0) GPIO_ACTIVE_HIGH>; default-state = "on"; }; postcode1 { - label="BMC_HB"; + label = "BMC_HB"; gpios = <&gpio ASPEED_GPIO(H, 1) GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; postcode2 { - label="FAULT"; + label = "FAULT"; gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>; }; // postcode3-7 are GPIOH3-H7 diff --git a/dts/src/arm/aspeed-bmc-quanta-s6q.dts b/dts/src/arm/aspeed-bmc-quanta-s6q.dts index 69e1bd2562..46cbba6305 100644 --- a/dts/src/arm/aspeed-bmc-quanta-s6q.dts +++ b/dts/src/arm/aspeed-bmc-quanta-s6q.dts @@ -65,19 +65,19 @@ compatible = "gpio-leds"; BMC_HEARTBEAT_N { - label="BMC_HEARTBEAT_N"; + label = "BMC_HEARTBEAT_N"; gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>; linux,default-trigger = "heartbeat"; }; BMC_LED_STATUS_AMBER_N { - label="BMC_LED_STATUS_AMBER_N"; + label = "BMC_LED_STATUS_AMBER_N"; gpios = <&gpio0 ASPEED_GPIO(S, 6) GPIO_ACTIVE_LOW>; default-state = "off"; }; FM_ID_LED_N { - label="FM_ID_LED_N"; + label = "FM_ID_LED_N"; gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>; default-state = "off"; }; diff --git a/dts/src/arm/at91-foxg20.dts b/dts/src/arm/at91-foxg20.dts index 7edf057047..9dfd5de808 100644 --- a/dts/src/arm/at91-foxg20.dts +++ b/dts/src/arm/at91-foxg20.dts @@ -155,10 +155,10 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - btn { + button { label = "Button"; gpios = <&pioC 4 GPIO_ACTIVE_LOW>; linux,code = <0x103>; diff --git a/dts/src/arm/at91-gatwick.dts b/dts/src/arm/at91-gatwick.dts index 5a81cab5fc..2c718cf84d 100644 --- a/dts/src/arm/at91-gatwick.dts +++ b/dts/src/arm/at91-gatwick.dts @@ -13,7 +13,7 @@ model = "Laird Workgroup Bridge 50N - Project Gatwick"; compatible = "laird,gatwick", "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; autorepeat; diff --git a/dts/src/arm/at91-kizbox.dts b/dts/src/arm/at91-kizbox.dts index 3b8812fcd8..307663b4ee 100644 --- a/dts/src/arm/at91-kizbox.dts +++ b/dts/src/arm/at91-kizbox.dts @@ -28,19 +28,17 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - reset { + button-reset { label = "PB_RST"; gpios = <&pioB 30 GPIO_ACTIVE_HIGH>; linux,code = <0x100>; wakeup-source; }; - user { + button-user { label = "PB_USER"; gpios = <&pioB 31 GPIO_ACTIVE_HIGH>; linux,code = <0x101>; diff --git a/dts/src/arm/at91-kizbox2-common.dtsi b/dts/src/arm/at91-kizbox2-common.dtsi index c08834ddf0..e5e21dff88 100644 --- a/dts/src/arm/at91-kizbox2-common.dtsi +++ b/dts/src/arm/at91-kizbox2-common.dtsi @@ -31,26 +31,24 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - prog { + button-prog { label = "PB_PROG"; gpios = <&pioE 27 GPIO_ACTIVE_LOW>; linux,code = <0x102>; wakeup-source; }; - reset { + button-reset { label = "PB_RST"; gpios = <&pioE 29 GPIO_ACTIVE_LOW>; linux,code = <0x100>; wakeup-source; }; - user { + button-user { label = "PB_USER"; gpios = <&pioE 31 GPIO_ACTIVE_HIGH>; linux,code = <0x101>; diff --git a/dts/src/arm/at91-kizbox3-hs.dts b/dts/src/arm/at91-kizbox3-hs.dts index 2799b2a1f4..7075df6549 100644 --- a/dts/src/arm/at91-kizbox3-hs.dts +++ b/dts/src/arm/at91-kizbox3-hs.dts @@ -55,7 +55,7 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default" , "default", "default", "default", "default" ; @@ -68,35 +68,35 @@ &pinctrl_pio_zbe_rst>; pinctrl-4 = <&pinctrl_pio_input>; - SW1 { + switch-1 { label = "SW1"; gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>; linux,code = <0x101>; wakeup-source; }; - SW2 { + switch-2 { label = "SW2"; gpios = <&pioA PIN_PA18 GPIO_ACTIVE_LOW>; linux,code = <0x102>; wakeup-source; }; - SW3 { + switch-3 { label = "SW3"; gpios = <&pioA PIN_PA22 GPIO_ACTIVE_LOW>; linux,code = <0x103>; wakeup-source; }; - SW7 { + switch-7 { label = "SW7"; gpios = <&pioA PIN_PA26 GPIO_ACTIVE_LOW>; linux,code = <0x107>; wakeup-source; }; - SW8 { + switch-8 { label = "SW8"; gpios = <&pioA PIN_PA24 GPIO_ACTIVE_LOW>; linux,code = <0x108>; @@ -186,7 +186,7 @@ &pioA { pinctrl_key_gpio_default: key_gpio_default { - pinmux= <PIN_PA22__GPIO>, + pinmux = <PIN_PA22__GPIO>, <PIN_PA24__GPIO>, <PIN_PA26__GPIO>, <PIN_PA29__GPIO>, diff --git a/dts/src/arm/at91-kizboxmini-common.dtsi b/dts/src/arm/at91-kizboxmini-common.dtsi index 9c622892c6..42640fe6b6 100644 --- a/dts/src/arm/at91-kizboxmini-common.dtsi +++ b/dts/src/arm/at91-kizboxmini-common.dtsi @@ -36,17 +36,15 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - prog { + key-prog { label = "PB_PROG"; gpios = <&pioC 17 GPIO_ACTIVE_LOW>; linux,code = <0x102>; wakeup-source; }; - reset { + key-reset { label = "PB_RST"; gpios = <&pioC 16 GPIO_ACTIVE_LOW>; linux,code = <0x100>; diff --git a/dts/src/arm/at91-nattis-2-natte-2.dts b/dts/src/arm/at91-nattis-2-natte-2.dts index 4f123477e6..f71377c9b7 100644 --- a/dts/src/arm/at91-nattis-2-natte-2.dts +++ b/dts/src/arm/at91-nattis-2-natte-2.dts @@ -18,7 +18,7 @@ gpio-keys { compatible = "gpio-keys"; - wakeup { + key-wakeup { label = "Wakeup"; linux,code = <10>; wakeup-source; diff --git a/dts/src/arm/at91-qil_a9260.dts b/dts/src/arm/at91-qil_a9260.dts index 969d990767..9d26f99963 100644 --- a/dts/src/arm/at91-qil_a9260.dts +++ b/dts/src/arm/at91-qil_a9260.dts @@ -198,10 +198,8 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - user_pb { + button-user { label = "user_pb"; gpios = <&pioB 10 GPIO_ACTIVE_LOW>; linux,code = <28>; diff --git a/dts/src/arm/at91-sam9x60ek.dts b/dts/src/arm/at91-sam9x60ek.dts index 81ccb0636a..81c38e101f 100644 --- a/dts/src/arm/at91-sam9x60ek.dts +++ b/dts/src/arm/at91-sam9x60ek.dts @@ -76,16 +76,15 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_key_gpio_default>; - status = "okay"; - sw1 { + button-1 { label = "SW1"; gpios = <&pioD 18 GPIO_ACTIVE_LOW>; - linux,code=<KEY_PROG1>; + linux,code = <KEY_PROG1>; wakeup-source; }; }; diff --git a/dts/src/arm/at91-sama5d27_som1.dtsi b/dts/src/arm/at91-sama5d27_som1.dtsi index a4623cc67c..8aa9e8dea3 100644 --- a/dts/src/arm/at91-sama5d27_som1.dtsi +++ b/dts/src/arm/at91-sama5d27_som1.dtsi @@ -15,7 +15,7 @@ compatible = "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5"; aliases { - i2c0 = &i2c0; + i2c0 = &i2c0; }; clocks { @@ -83,6 +83,8 @@ macb0: ethernet@f8008000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb0_default>; + #address-cells = <1>; + #size-cells = <0>; phy-mode = "rmii"; ethernet-phy@7 { diff --git a/dts/src/arm/at91-sama5d27_som1_ek.dts b/dts/src/arm/at91-sama5d27_som1_ek.dts index 08f0d4b995..0dc6ca377b 100644 --- a/dts/src/arm/at91-sama5d27_som1_ek.dts +++ b/dts/src/arm/at91-sama5d27_som1_ek.dts @@ -21,8 +21,8 @@ serial0 = &uart1; /* DBGU */ serial1 = &uart4; /* mikro BUS 1 */ serial2 = &uart2; /* mikro BUS 2 */ - i2c1 = &i2c1; - i2c2 = &i2c3; + i2c1 = &i2c1; + i2c2 = &i2c3; }; chosen { @@ -478,13 +478,13 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_key_gpio_default>; - pb4 { + button { label = "USER"; gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>; linux,code = <KEY_PROG1>; diff --git a/dts/src/arm/at91-sama5d27_wlsom1.dtsi b/dts/src/arm/at91-sama5d27_wlsom1.dtsi index ba621783ac..76b2025c67 100644 --- a/dts/src/arm/at91-sama5d27_wlsom1.dtsi +++ b/dts/src/arm/at91-sama5d27_wlsom1.dtsi @@ -194,6 +194,8 @@ &macb0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb0_default>; + #address-cells = <1>; + #size-cells = <0>; phy-mode = "rmii"; ethernet-phy@0 { diff --git a/dts/src/arm/at91-sama5d27_wlsom1_ek.dts b/dts/src/arm/at91-sama5d27_wlsom1_ek.dts index 5e8755f227..b665ddc6b0 100644 --- a/dts/src/arm/at91-sama5d27_wlsom1_ek.dts +++ b/dts/src/arm/at91-sama5d27_wlsom1_ek.dts @@ -19,21 +19,20 @@ serial1 = &uart6; /* BT */ serial2 = &uart5; /* mikro BUS 2 */ serial3 = &uart3; /* mikro BUS 1 */ - i2c1 = &i2c1; + i2c1 = &i2c1; }; chosen { stdout-path = "serial0:115200n8"; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_key_gpio_default>; - status = "okay"; - sw4 { + button-1 { label = "USER BUTTON"; gpios = <&pioA PIN_PB2 GPIO_ACTIVE_LOW>; linux,code = <KEY_PROG1>; diff --git a/dts/src/arm/at91-sama5d2_icp.dts b/dts/src/arm/at91-sama5d2_icp.dts index 164201a8fb..6865be8d77 100644 --- a/dts/src/arm/at91-sama5d2_icp.dts +++ b/dts/src/arm/at91-sama5d2_icp.dts @@ -24,8 +24,8 @@ serial1 = &uart1; /* mikro BUS 3 */ serial3 = &uart3; /* mikro BUS 2 */ serial5 = &uart7; /* flx2 */ - i2c0 = &i2c0; - i2c1 = &i2c1; + i2c0 = &i2c0; + i2c1 = &i2c1; }; chosen { @@ -42,14 +42,13 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_key_gpio_default>; - status = "okay"; - sw4 { + button-1 { label = "USER_PB1"; gpios = <&pioA PIN_PD0 GPIO_ACTIVE_LOW>; linux,code = <KEY_PROG1>; diff --git a/dts/src/arm/at91-sama5d2_ptc_ek.dts b/dts/src/arm/at91-sama5d2_ptc_ek.dts index 8ed58af013..76a711b167 100644 --- a/dts/src/arm/at91-sama5d2_ptc_ek.dts +++ b/dts/src/arm/at91-sama5d2_ptc_ek.dts @@ -20,9 +20,9 @@ aliases { serial0 = &uart0; /* DBGU */ - i2c0 = &i2c0; /* mikroBUS 1 */ - i2c1 = &i2c1; /* XPRO EXT1 */ - i2c2 = &i2c2; + i2c0 = &i2c0; /* mikroBUS 1 */ + i2c1 = &i2c1; /* XPRO EXT1 */ + i2c2 = &i2c2; }; chosen { @@ -139,6 +139,8 @@ macb0: ethernet@f8008000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>; + #address-cells = <1>; + #size-cells = <0>; phy-mode = "rmii"; status = "okay"; @@ -394,13 +396,13 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_key_gpio_default>; - bp1 { + button-1 { label = "PB_USER"; gpios = <&pioA PIN_PA10 GPIO_ACTIVE_LOW>; linux,code = <KEY_PROG1>; diff --git a/dts/src/arm/at91-sama5d2_xplained.dts b/dts/src/arm/at91-sama5d2_xplained.dts index cdfe891f9a..85949c24b6 100644 --- a/dts/src/arm/at91-sama5d2_xplained.dts +++ b/dts/src/arm/at91-sama5d2_xplained.dts @@ -147,6 +147,8 @@ macb0: ethernet@f8008000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>; + #address-cells = <1>; + #size-cells = <0>; phy-mode = "rmii"; status = "okay"; @@ -205,10 +207,10 @@ regulator-state-mem { regulator-on-in-suspend; - regulator-suspend-min-microvolt=<1400000>; - regulator-suspend-max-microvolt=<1400000>; + regulator-suspend-min-microvolt = <1400000>; + regulator-suspend-max-microvolt = <1400000>; regulator-changeable-in-suspend; - regulator-mode=<ACT8945A_REGULATOR_MODE_LOWPOWER>; + regulator-mode = <ACT8945A_REGULATOR_MODE_LOWPOWER>; }; }; @@ -703,13 +705,13 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_key_gpio_default>; - bp1 { + button { label = "PB_USER"; gpios = <&pioA PIN_PB9 GPIO_ACTIVE_LOW>; linux,code = <KEY_PROG1>; diff --git a/dts/src/arm/at91-sama5d3_xplained.dts b/dts/src/arm/at91-sama5d3_xplained.dts index a49c2966b4..1f42a6a981 100644 --- a/dts/src/arm/at91-sama5d3_xplained.dts +++ b/dts/src/arm/at91-sama5d3_xplained.dts @@ -372,13 +372,13 @@ regulator-always-on; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_key_gpio>; - bp3 { + button { label = "PB_USER"; gpios = <&pioE 29 GPIO_ACTIVE_LOW>; linux,code = <KEY_PROG1>; diff --git a/dts/src/arm/at91-sama5d4_xplained.dts b/dts/src/arm/at91-sama5d4_xplained.dts index e519d27479..f122f302f8 100644 --- a/dts/src/arm/at91-sama5d4_xplained.dts +++ b/dts/src/arm/at91-sama5d4_xplained.dts @@ -242,13 +242,13 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_key_gpio>; - pb_user1 { + button { label = "pb_user1"; gpios = <&pioE 8 GPIO_ACTIVE_HIGH>; linux,code = <KEY_PROG1>; diff --git a/dts/src/arm/at91-sama5d4ek.dts b/dts/src/arm/at91-sama5d4ek.dts index 7017f626f3..fce4e93c6b 100644 --- a/dts/src/arm/at91-sama5d4ek.dts +++ b/dts/src/arm/at91-sama5d4ek.dts @@ -269,13 +269,13 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_key_gpio>; - pb_user1 { + button { label = "pb_user1"; gpios = <&pioE 13 GPIO_ACTIVE_HIGH>; linux,code = <0x100>; diff --git a/dts/src/arm/at91-sama7g5ek.dts b/dts/src/arm/at91-sama7g5ek.dts index 103544620f..de44da2e4a 100644 --- a/dts/src/arm/at91-sama7g5ek.dts +++ b/dts/src/arm/at91-sama7g5ek.dts @@ -45,13 +45,13 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_key_gpio_default>; - bp1 { + button { label = "PB_USER"; gpios = <&pioA PIN_PA12 GPIO_ACTIVE_LOW>; linux,code = <KEY_PROG1>; diff --git a/dts/src/arm/at91-wb45n.dts b/dts/src/arm/at91-wb45n.dts index 54d130c921..ef73f727f7 100644 --- a/dts/src/arm/at91-wb45n.dts +++ b/dts/src/arm/at91-wb45n.dts @@ -12,13 +12,10 @@ model = "Laird Workgroup Bridge 45N - Atmel AT91SAM (dt)"; compatible = "laird,wb45n", "laird,wbxx", "atmel,at91sam9x5", "atmel,at91sam9"; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - irqbtn@18 { - reg = <18>; + button { label = "IRQBTN"; linux,code = <99>; gpios = <&pioB 18 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/at91-wb50n.dts b/dts/src/arm/at91-wb50n.dts index 89f0f717f7..ec2becf613 100644 --- a/dts/src/arm/at91-wb50n.dts +++ b/dts/src/arm/at91-wb50n.dts @@ -13,21 +13,17 @@ model = "Laird Workgroup Bridge 50N - Atmel SAMA5D"; compatible = "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - btn0@10 { - reg = <10>; + button-0 { label = "BTNESC"; linux,code = <1>; /* ESC button */ gpios = <&pioA 10 GPIO_ACTIVE_LOW>; wakeup-source; }; - irqbtn@31 { - reg = <31>; + button-1 { label = "IRQBTN"; linux,code = <99>; /* SysReq button */ gpios = <&pioE 31 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/at91sam9260.dtsi b/dts/src/arm/at91sam9260.dtsi index 7368347c93..9d9820db94 100644 --- a/dts/src/arm/at91sam9260.dtsi +++ b/dts/src/arm/at91sam9260.dtsi @@ -123,7 +123,7 @@ clock-names = "slow_xtal", "main_xtal"; }; - rstc@fffffd00 { + reset-controller@fffffd00 { compatible = "atmel,at91sam9260-rstc"; reg = <0xfffffd00 0x10>; clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>; diff --git a/dts/src/arm/at91sam9260ek.dts b/dts/src/arm/at91sam9260ek.dts index 6381088ba2..bb72f050a4 100644 --- a/dts/src/arm/at91sam9260ek.dts +++ b/dts/src/arm/at91sam9260ek.dts @@ -144,17 +144,17 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - btn3 { + button-3 { label = "Button 3"; gpios = <&pioA 30 GPIO_ACTIVE_LOW>; linux,code = <0x103>; wakeup-source; }; - btn4 { + button-4 { label = "Button 4"; gpios = <&pioA 31 GPIO_ACTIVE_LOW>; linux,code = <KEY_PROG1>; diff --git a/dts/src/arm/at91sam9261.dtsi b/dts/src/arm/at91sam9261.dtsi index 7adc36ca8a..259aca5653 100644 --- a/dts/src/arm/at91sam9261.dtsi +++ b/dts/src/arm/at91sam9261.dtsi @@ -603,7 +603,7 @@ clock-names = "slow_xtal", "main_xtal"; }; - rstc@fffffd00 { + reset-controller@fffffd00 { compatible = "atmel,at91sam9260-rstc"; reg = <0xfffffd00 0x10>; clocks = <&slow_xtal>; diff --git a/dts/src/arm/at91sam9261ek.dts b/dts/src/arm/at91sam9261ek.dts index 6fb4fe49cf..88869ca874 100644 --- a/dts/src/arm/at91sam9261ek.dts +++ b/dts/src/arm/at91sam9261ek.dts @@ -211,31 +211,31 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - button_0 { + button-0 { label = "button_0"; gpios = <&pioA 27 GPIO_ACTIVE_LOW>; linux,code = <256>; wakeup-source; }; - button_1 { + button-1 { label = "button_1"; gpios = <&pioA 26 GPIO_ACTIVE_LOW>; linux,code = <257>; wakeup-source; }; - button_2 { + button-2 { label = "button_2"; gpios = <&pioA 25 GPIO_ACTIVE_LOW>; linux,code = <258>; wakeup-source; }; - button_3 { + button-3 { label = "button_3"; gpios = <&pioA 24 GPIO_ACTIVE_LOW>; linux,code = <259>; diff --git a/dts/src/arm/at91sam9263.dtsi b/dts/src/arm/at91sam9263.dtsi index fe45d96239..c080df8c23 100644 --- a/dts/src/arm/at91sam9263.dtsi +++ b/dts/src/arm/at91sam9263.dtsi @@ -151,7 +151,7 @@ clock-names = "t0_clk", "slow_clk"; }; - rstc@fffffd00 { + reset-controller@fffffd00 { compatible = "atmel,at91sam9260-rstc"; reg = <0xfffffd00 0x10>; clocks = <&slow_xtal>; diff --git a/dts/src/arm/at91sam9263ek.dts b/dts/src/arm/at91sam9263ek.dts index e732565913..ce8baff6a9 100644 --- a/dts/src/arm/at91sam9263ek.dts +++ b/dts/src/arm/at91sam9263ek.dts @@ -232,17 +232,17 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - left_click { + button-left-click { label = "left_click"; gpios = <&pioC 5 GPIO_ACTIVE_LOW>; linux,code = <272>; wakeup-source; }; - right_click { + button-right-click { label = "right_click"; gpios = <&pioC 4 GPIO_ACTIVE_LOW>; linux,code = <273>; diff --git a/dts/src/arm/at91sam9g20ek_common.dtsi b/dts/src/arm/at91sam9g20ek_common.dtsi index 85c17dd1c8..60d61291f3 100644 --- a/dts/src/arm/at91sam9g20ek_common.dtsi +++ b/dts/src/arm/at91sam9g20ek_common.dtsi @@ -234,17 +234,17 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - btn3 { + button-3 { label = "Button 3"; gpios = <&pioA 30 GPIO_ACTIVE_LOW>; linux,code = <0x103>; wakeup-source; }; - btn4 { + button-4 { label = "Button 4"; gpios = <&pioA 31 GPIO_ACTIVE_LOW>; linux,code = <KEY_PROG1>; diff --git a/dts/src/arm/at91sam9g25-gardena-smart-gateway.dts b/dts/src/arm/at91sam9g25-gardena-smart-gateway.dts index 7da70aeeb5..92f2c05c87 100644 --- a/dts/src/arm/at91sam9g25-gardena-smart-gateway.dts +++ b/dts/src/arm/at91sam9g25-gardena-smart-gateway.dts @@ -23,7 +23,7 @@ gpio-keys { compatible = "gpio-keys"; - user_btn1 { + button { label = "USER_BTN1"; gpios = <&pioA 24 GPIO_ACTIVE_LOW>; linux,code = <KEY_PROG1>; diff --git a/dts/src/arm/at91sam9g45.dtsi b/dts/src/arm/at91sam9g45.dtsi index 2ab730fd64..09794561c7 100644 --- a/dts/src/arm/at91sam9g45.dtsi +++ b/dts/src/arm/at91sam9g45.dtsi @@ -137,7 +137,7 @@ clock-names = "slow_clk", "main_xtal"; }; - rstc@fffffd00 { + reset-controller@fffffd00 { compatible = "atmel,at91sam9g45-rstc"; reg = <0xfffffd00 0x10>; clocks = <&clk32k>; diff --git a/dts/src/arm/at91sam9m10g45ek.dts b/dts/src/arm/at91sam9m10g45ek.dts index e5db198a87..7f45e81ca1 100644 --- a/dts/src/arm/at91sam9m10g45ek.dts +++ b/dts/src/arm/at91sam9m10g45ek.dts @@ -343,48 +343,48 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - left_click { + button-left-click { label = "left_click"; gpios = <&pioB 6 GPIO_ACTIVE_LOW>; linux,code = <272>; wakeup-source; }; - right_click { + button-right-click { label = "right_click"; gpios = <&pioB 7 GPIO_ACTIVE_LOW>; linux,code = <273>; wakeup-source; }; - left { + button-left { label = "Joystick Left"; gpios = <&pioB 14 GPIO_ACTIVE_LOW>; linux,code = <105>; }; - right { + button-right { label = "Joystick Right"; gpios = <&pioB 15 GPIO_ACTIVE_LOW>; linux,code = <106>; }; - up { + button-up { label = "Joystick Up"; gpios = <&pioB 16 GPIO_ACTIVE_LOW>; linux,code = <103>; }; - down { + button-down { label = "Joystick Down"; gpios = <&pioB 17 GPIO_ACTIVE_LOW>; linux,code = <108>; }; - enter { + button-enter { label = "Joystick Press"; gpios = <&pioB 18 GPIO_ACTIVE_LOW>; linux,code = <28>; diff --git a/dts/src/arm/at91sam9n12.dtsi b/dts/src/arm/at91sam9n12.dtsi index 0785389f55..556f35ce49 100644 --- a/dts/src/arm/at91sam9n12.dtsi +++ b/dts/src/arm/at91sam9n12.dtsi @@ -126,7 +126,7 @@ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; }; - rstc@fffffe00 { + reset-controller@fffffe00 { compatible = "atmel,at91sam9g45-rstc"; reg = <0xfffffe00 0x10>; clocks = <&clk32k>; diff --git a/dts/src/arm/at91sam9n12ek.dts b/dts/src/arm/at91sam9n12ek.dts index c905d7bfc7..4c644d4c6b 100644 --- a/dts/src/arm/at91sam9n12ek.dts +++ b/dts/src/arm/at91sam9n12ek.dts @@ -226,10 +226,10 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - enter { + button-enter { label = "Enter"; gpios = <&pioB 3 GPIO_ACTIVE_LOW>; linux,code = <28>; diff --git a/dts/src/arm/at91sam9rl.dtsi b/dts/src/arm/at91sam9rl.dtsi index 730d1182c7..12c6348118 100644 --- a/dts/src/arm/at91sam9rl.dtsi +++ b/dts/src/arm/at91sam9rl.dtsi @@ -766,7 +766,7 @@ clock-names = "slow_clk", "main_xtal"; }; - rstc@fffffd00 { + reset-controller@fffffd00 { compatible = "atmel,at91sam9260-rstc"; reg = <0xfffffd00 0x10>; clocks = <&clk32k>; diff --git a/dts/src/arm/at91sam9rlek.dts b/dts/src/arm/at91sam9rlek.dts index ddaadfec67..a573512705 100644 --- a/dts/src/arm/at91sam9rlek.dts +++ b/dts/src/arm/at91sam9rlek.dts @@ -248,17 +248,17 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - right_click { + button-right-click { label = "right_click"; gpios = <&pioB 0 GPIO_ACTIVE_LOW>; linux,code = <273>; wakeup-source; }; - left_click { + button-left-click { label = "left_click"; gpios = <&pioB 1 GPIO_ACTIVE_LOW>; linux,code = <272>; diff --git a/dts/src/arm/at91sam9x5.dtsi b/dts/src/arm/at91sam9x5.dtsi index 395e883644..ea3b11336c 100644 --- a/dts/src/arm/at91sam9x5.dtsi +++ b/dts/src/arm/at91sam9x5.dtsi @@ -134,7 +134,7 @@ clock-names = "slow_clk", "main_xtal"; }; - reset_controller: rstc@fffffe00 { + reset_controller: reset-controller@fffffe00 { compatible = "atmel,at91sam9g45-rstc"; reg = <0xfffffe00 0x10>; clocks = <&clk32k>; diff --git a/dts/src/arm/axm5516-cpus.dtsi b/dts/src/arm/axm5516-cpus.dtsi index 3bcf4e0a3c..f13ef80b66 100644 --- a/dts/src/arm/axm5516-cpus.dtsi +++ b/dts/src/arm/axm5516-cpus.dtsi @@ -73,7 +73,7 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x00>; - clock-frequency= <1400000000>; + clock-frequency = <1400000000>; cpu-release-addr = <0>; // Fixed by the boot loader }; @@ -81,7 +81,7 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x01>; - clock-frequency= <1400000000>; + clock-frequency = <1400000000>; cpu-release-addr = <0>; // Fixed by the boot loader }; @@ -89,7 +89,7 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x02>; - clock-frequency= <1400000000>; + clock-frequency = <1400000000>; cpu-release-addr = <0>; // Fixed by the boot loader }; @@ -97,7 +97,7 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x03>; - clock-frequency= <1400000000>; + clock-frequency = <1400000000>; cpu-release-addr = <0>; // Fixed by the boot loader }; @@ -105,7 +105,7 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x100>; - clock-frequency= <1400000000>; + clock-frequency = <1400000000>; cpu-release-addr = <0>; // Fixed by the boot loader }; @@ -113,7 +113,7 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x101>; - clock-frequency= <1400000000>; + clock-frequency = <1400000000>; cpu-release-addr = <0>; // Fixed by the boot loader }; @@ -121,7 +121,7 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x102>; - clock-frequency= <1400000000>; + clock-frequency = <1400000000>; cpu-release-addr = <0>; // Fixed by the boot loader }; @@ -129,7 +129,7 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x103>; - clock-frequency= <1400000000>; + clock-frequency = <1400000000>; cpu-release-addr = <0>; // Fixed by the boot loader }; @@ -137,7 +137,7 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x200>; - clock-frequency= <1400000000>; + clock-frequency = <1400000000>; cpu-release-addr = <0>; // Fixed by the boot loader }; @@ -145,7 +145,7 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x201>; - clock-frequency= <1400000000>; + clock-frequency = <1400000000>; cpu-release-addr = <0>; // Fixed by the boot loader }; @@ -153,7 +153,7 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x202>; - clock-frequency= <1400000000>; + clock-frequency = <1400000000>; cpu-release-addr = <0>; // Fixed by the boot loader }; @@ -161,7 +161,7 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x203>; - clock-frequency= <1400000000>; + clock-frequency = <1400000000>; cpu-release-addr = <0>; // Fixed by the boot loader }; @@ -169,7 +169,7 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x300>; - clock-frequency= <1400000000>; + clock-frequency = <1400000000>; cpu-release-addr = <0>; // Fixed by the boot loader }; @@ -177,7 +177,7 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x301>; - clock-frequency= <1400000000>; + clock-frequency = <1400000000>; cpu-release-addr = <0>; // Fixed by the boot loader }; @@ -185,7 +185,7 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x302>; - clock-frequency= <1400000000>; + clock-frequency = <1400000000>; cpu-release-addr = <0>; // Fixed by the boot loader }; @@ -193,7 +193,7 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x303>; - clock-frequency= <1400000000>; + clock-frequency = <1400000000>; cpu-release-addr = <0>; // Fixed by the boot loader }; }; diff --git a/dts/src/arm/bcm11351.dtsi b/dts/src/arm/bcm11351.dtsi index 6197e7d80e..53696078bb 100644 --- a/dts/src/arm/bcm11351.dtsi +++ b/dts/src/arm/bcm11351.dtsi @@ -1,15 +1,5 @@ -/* - * Copyright (C) 2012-2013 Broadcom Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright (C) 2012-2013 Broadcom Corporation #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> diff --git a/dts/src/arm/bcm21664-garnet.dts b/dts/src/arm/bcm21664-garnet.dts index be468f4adc..1854cd907a 100644 --- a/dts/src/arm/bcm21664-garnet.dts +++ b/dts/src/arm/bcm21664-garnet.dts @@ -1,15 +1,5 @@ -/* - * Copyright (C) 2014 Broadcom Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright (C) 2014 Broadcom Corporation /dts-v1/; diff --git a/dts/src/arm/bcm21664.dtsi b/dts/src/arm/bcm21664.dtsi index cc58f2b926..2684c37cb3 100644 --- a/dts/src/arm/bcm21664.dtsi +++ b/dts/src/arm/bcm21664.dtsi @@ -1,15 +1,5 @@ -/* - * Copyright (C) 2014 Broadcom Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright (C) 2014 Broadcom Corporation #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> diff --git a/dts/src/arm/bcm2711-rpi.dtsi b/dts/src/arm/bcm2711-rpi.dtsi index ca266c5d9f..98817a6675 100644 --- a/dts/src/arm/bcm2711-rpi.dtsi +++ b/dts/src/arm/bcm2711-rpi.dtsi @@ -69,6 +69,10 @@ }; }; +&v3d { + clocks = <&firmware_clocks 5>; +}; + &vchiq { interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; }; diff --git a/dts/src/arm/bcm2711.dtsi b/dts/src/arm/bcm2711.dtsi index 89af57482b..941c4d1679 100644 --- a/dts/src/arm/bcm2711.dtsi +++ b/dts/src/arm/bcm2711.dtsi @@ -107,12 +107,13 @@ }; pm: watchdog@7e100000 { - compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt"; + compatible = "brcm,bcm2711-pm", "brcm,bcm2835-pm-wdt"; #power-domain-cells = <1>; #reset-cells = <1>; reg = <0x7e100000 0x114>, <0x7e00a000 0x24>, <0x7ec11000 0x20>; + reg-names = "pm", "asb", "rpivid_asb"; clocks = <&clocks BCM2835_CLOCK_V3D>, <&clocks BCM2835_CLOCK_PERI_IMAGE>, <&clocks BCM2835_CLOCK_H264>, @@ -601,6 +602,17 @@ #size-cells = <0x0>; }; }; + + v3d: gpu@7ec00000 { + compatible = "brcm,2711-v3d"; + reg = <0x0 0x7ec00000 0x4000>, + <0x0 0x7ec04000 0x4000>; + reg-names = "hub", "core0"; + + power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>; + resets = <&pm BCM2835_RESET_V3D>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + }; }; }; diff --git a/dts/src/arm/bcm28155-ap.dts b/dts/src/arm/bcm28155-ap.dts index ead6e9804d..fce3d5260b 100644 --- a/dts/src/arm/bcm28155-ap.dts +++ b/dts/src/arm/bcm28155-ap.dts @@ -1,15 +1,5 @@ -/* - * Copyright (C) 2013 Broadcom Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright (C) 2013 Broadcom Corporation /dts-v1/; @@ -31,22 +21,22 @@ }; i2c@3e016000 { - status="okay"; + status = "okay"; clock-frequency = <400000>; }; i2c@3e017000 { - status="okay"; + status = "okay"; clock-frequency = <400000>; }; i2c@3e018000 { - status="okay"; + status = "okay"; clock-frequency = <400000>; }; i2c@3500d000 { - status="okay"; + status = "okay"; clock-frequency = <100000>; pmu: pmu@8 { diff --git a/dts/src/arm/bcm2835-common.dtsi b/dts/src/arm/bcm2835-common.dtsi index c25e797b90..a037d2bc5b 100644 --- a/dts/src/arm/bcm2835-common.dtsi +++ b/dts/src/arm/bcm2835-common.dtsi @@ -62,6 +62,7 @@ #reset-cells = <1>; reg = <0x7e100000 0x114>, <0x7e00a000 0x24>; + reg-names = "pm", "asb"; clocks = <&clocks BCM2835_CLOCK_V3D>, <&clocks BCM2835_CLOCK_PERI_IMAGE>, <&clocks BCM2835_CLOCK_H264>, diff --git a/dts/src/arm/bcm283x.dtsi b/dts/src/arm/bcm283x.dtsi index c113661a66..d2d9c6e67f 100644 --- a/dts/src/arm/bcm283x.dtsi +++ b/dts/src/arm/bcm283x.dtsi @@ -50,9 +50,9 @@ trips { cpu-crit { - temperature = <90000>; - hysteresis = <0>; - type = "critical"; + temperature = <90000>; + hysteresis = <0>; + type = "critical"; }; }; @@ -352,8 +352,6 @@ clocks = <&clocks BCM2835_CLOCK_VPU>, <&clocks BCM2835_CLOCK_DPI>; clock-names = "core", "pixel"; - #address-cells = <1>; - #size-cells = <0>; status = "disabled"; }; diff --git a/dts/src/arm/bcm4708-asus-rt-ac56u.dts b/dts/src/arm/bcm4708-asus-rt-ac56u.dts index 8ed4037675..09ee3e46c0 100644 --- a/dts/src/arm/bcm4708-asus-rt-ac56u.dts +++ b/dts/src/arm/bcm4708-asus-rt-ac56u.dts @@ -70,19 +70,19 @@ gpio-keys { compatible = "gpio-keys"; - rfkill { + button-rfkill { label = "WiFi"; linux,code = <KEY_RFKILL>; gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; }; - wps { + button-wps { label = "WPS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/bcm4708-asus-rt-ac68u.dts b/dts/src/arm/bcm4708-asus-rt-ac68u.dts index 667b118ba4..32619c6045 100644 --- a/dts/src/arm/bcm4708-asus-rt-ac68u.dts +++ b/dts/src/arm/bcm4708-asus-rt-ac68u.dts @@ -54,25 +54,25 @@ gpio-keys { compatible = "gpio-keys"; - brightness { + button-brightness { label = "Backlight"; linux,code = <KEY_BRIGHTNESS_ZERO>; gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; }; - wps { + button-wps { label = "WPS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; }; - rfkill { + button-rfkill { label = "WiFi"; linux,code = <KEY_RFKILL>; gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/bcm4708-buffalo-wzr-1166dhp-common.dtsi b/dts/src/arm/bcm4708-buffalo-wzr-1166dhp-common.dtsi index d659e409a1..a658b9b7bc 100644 --- a/dts/src/arm/bcm4708-buffalo-wzr-1166dhp-common.dtsi +++ b/dts/src/arm/bcm4708-buffalo-wzr-1166dhp-common.dtsi @@ -104,33 +104,33 @@ gpio-keys { compatible = "gpio-keys"; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; }; - aoss { + button-aoss { label = "AOSS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; }; /* Commit mode set by switch? */ - mode { + button-mode { label = "Mode"; linux,code = <KEY_SETUP>; gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; }; /* Switch: AP mode */ - sw_ap { + button-sw-ap { label = "AP"; linux,code = <BTN_0>; gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; }; - eject { + button-eject { label = "USB eject"; linux,code = <KEY_EJECTCD>; gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/bcm4708-buffalo-wzr-1750dhp.dts b/dts/src/arm/bcm4708-buffalo-wzr-1750dhp.dts index ff31ce4583..f8f53457dd 100644 --- a/dts/src/arm/bcm4708-buffalo-wzr-1750dhp.dts +++ b/dts/src/arm/bcm4708-buffalo-wzr-1750dhp.dts @@ -100,33 +100,33 @@ gpio-keys { compatible = "gpio-keys"; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; }; - aoss { + button-aoss { label = "AOSS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; }; /* Commit mode set by switch? */ - mode { + button-mode { label = "Mode"; linux,code = <KEY_SETUP>; gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; }; /* Switch: AP mode */ - sw_ap { + button-sw-ap { label = "AP"; linux,code = <BTN_0>; gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; }; - eject { + button-eject { label = "USB eject"; linux,code = <KEY_EJECTCD>; gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/bcm4708-linksys-ea6300-v1.dts b/dts/src/arm/bcm4708-linksys-ea6300-v1.dts index 5bac1e1577..0ed25bf71f 100644 --- a/dts/src/arm/bcm4708-linksys-ea6300-v1.dts +++ b/dts/src/arm/bcm4708-linksys-ea6300-v1.dts @@ -29,13 +29,13 @@ gpio-keys { compatible = "gpio-keys"; - wps { + button-wps { label = "WPS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/bcm4708-linksys-ea6500-v2.dts b/dts/src/arm/bcm4708-linksys-ea6500-v2.dts index cd797b4202..f1412ba83d 100644 --- a/dts/src/arm/bcm4708-linksys-ea6500-v2.dts +++ b/dts/src/arm/bcm4708-linksys-ea6500-v2.dts @@ -25,13 +25,13 @@ gpio-keys { compatible = "gpio-keys"; - wps { + button-wps { label = "WPS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/bcm4708-luxul-xap-1510.dts b/dts/src/arm/bcm4708-luxul-xap-1510.dts index 5b4a481be4..14ee410183 100644 --- a/dts/src/arm/bcm4708-luxul-xap-1510.dts +++ b/dts/src/arm/bcm4708-luxul-xap-1510.dts @@ -45,7 +45,7 @@ gpio-keys { compatible = "gpio-keys"; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/bcm4708-luxul-xwc-1000.dts b/dts/src/arm/bcm4708-luxul-xwc-1000.dts index c81944cd6d..600ab087f5 100644 --- a/dts/src/arm/bcm4708-luxul-xwc-1000.dts +++ b/dts/src/arm/bcm4708-luxul-xwc-1000.dts @@ -52,7 +52,7 @@ gpio-keys { compatible = "gpio-keys"; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/bcm4708-netgear-r6250.dts b/dts/src/arm/bcm4708-netgear-r6250.dts index 43a5d675dd..fd6d8d2a44 100644 --- a/dts/src/arm/bcm4708-netgear-r6250.dts +++ b/dts/src/arm/bcm4708-netgear-r6250.dts @@ -63,19 +63,19 @@ gpio-keys { compatible = "gpio-keys"; - wps { + button-wps { label = "WPS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; }; - rfkill { + button-rfkill { label = "WiFi"; linux,code = <KEY_RFKILL>; gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/bcm4708-netgear-r6300-v2.dts b/dts/src/arm/bcm4708-netgear-r6300-v2.dts index 4c60eda296..76fc1099d4 100644 --- a/dts/src/arm/bcm4708-netgear-r6300-v2.dts +++ b/dts/src/arm/bcm4708-netgear-r6300-v2.dts @@ -59,19 +59,19 @@ gpio-keys { compatible = "gpio-keys"; - wps { + button-wps { label = "WPS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; }; - rfkill { + button-rfkill { label = "WiFi"; linux,code = <KEY_RFKILL>; gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/bcm4708-smartrg-sr400ac.dts b/dts/src/arm/bcm4708-smartrg-sr400ac.dts index 9ca6d1b259..6bcdfb73cb 100644 --- a/dts/src/arm/bcm4708-smartrg-sr400ac.dts +++ b/dts/src/arm/bcm4708-smartrg-sr400ac.dts @@ -94,19 +94,19 @@ gpio-keys { compatible = "gpio-keys"; - rfkill { + button-rfkill { label = "WiFi"; linux,code = <KEY_RFKILL>; gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; }; - wps { + button-wps { label = "WPS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/bcm47081-asus-rt-n18u.dts b/dts/src/arm/bcm47081-asus-rt-n18u.dts index 0e273c5987..ca47cc4f2b 100644 --- a/dts/src/arm/bcm47081-asus-rt-n18u.dts +++ b/dts/src/arm/bcm47081-asus-rt-n18u.dts @@ -60,13 +60,13 @@ gpio-keys { compatible = "gpio-keys"; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; }; - wps { + button-wps { label = "WPS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/bcm47081-buffalo-wzr-600dhp2.dts b/dts/src/arm/bcm47081-buffalo-wzr-600dhp2.dts index d00495a8b6..0edc2543e5 100644 --- a/dts/src/arm/bcm47081-buffalo-wzr-600dhp2.dts +++ b/dts/src/arm/bcm47081-buffalo-wzr-600dhp2.dts @@ -91,26 +91,26 @@ gpio-keys { compatible = "gpio-keys"; - aoss { + button-aoss { label = "AOSS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; }; /* Switch device mode? */ - mode { + button-mode { label = "Mode"; linux,code = <KEY_SETUP>; gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; }; - eject { + button-eject { label = "USB eject"; linux,code = <KEY_EJECTCD>; gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/bcm47081-buffalo-wzr-900dhp.dts b/dts/src/arm/bcm47081-buffalo-wzr-900dhp.dts index 8b1a05a0f1..1f0998f34a 100644 --- a/dts/src/arm/bcm47081-buffalo-wzr-900dhp.dts +++ b/dts/src/arm/bcm47081-buffalo-wzr-900dhp.dts @@ -96,7 +96,7 @@ gpio-keys { compatible = "gpio-keys"; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/bcm47081-luxul-xap-1410.dts b/dts/src/arm/bcm47081-luxul-xap-1410.dts index 68aaf0af39..c8c0237754 100644 --- a/dts/src/arm/bcm47081-luxul-xap-1410.dts +++ b/dts/src/arm/bcm47081-luxul-xap-1410.dts @@ -45,7 +45,7 @@ gpio-keys { compatible = "gpio-keys"; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/bcm47081-luxul-xwr-1200.dts b/dts/src/arm/bcm47081-luxul-xwr-1200.dts index 9316a36434..3b35a7af4b 100644 --- a/dts/src/arm/bcm47081-luxul-xwr-1200.dts +++ b/dts/src/arm/bcm47081-luxul-xwr-1200.dts @@ -94,7 +94,7 @@ gpio-keys { compatible = "gpio-keys"; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/bcm47081-tplink-archer-c5-v2.dts b/dts/src/arm/bcm47081-tplink-archer-c5-v2.dts index 12e34a0439..19a7971b5a 100644 --- a/dts/src/arm/bcm47081-tplink-archer-c5-v2.dts +++ b/dts/src/arm/bcm47081-tplink-archer-c5-v2.dts @@ -77,13 +77,13 @@ gpio-keys { compatible = "gpio-keys"; - rfkill { + button-rfkill { label = "WiFi"; linux,code = <KEY_RFKILL>; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/bcm4709-asus-rt-ac87u.dts b/dts/src/arm/bcm4709-asus-rt-ac87u.dts index 7546c8d07b..f52a75c4ca 100644 --- a/dts/src/arm/bcm4709-asus-rt-ac87u.dts +++ b/dts/src/arm/bcm4709-asus-rt-ac87u.dts @@ -47,16 +47,14 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - wps { + button-wps { label = "WPS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/bcm4709-buffalo-wxr-1900dhp.dts b/dts/src/arm/bcm4709-buffalo-wxr-1900dhp.dts index beae9eab9c..5ff6c588e1 100644 --- a/dts/src/arm/bcm4709-buffalo-wxr-1900dhp.dts +++ b/dts/src/arm/bcm4709-buffalo-wxr-1900dhp.dts @@ -77,42 +77,40 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - power { + button-power { label = "Power"; linux,code = <KEY_POWER>; gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; }; - aoss { + button-aoss { label = "AOSS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>; }; /* Commit mode set by switch? */ - mode { + button-mode { label = "Mode"; linux,code = <KEY_SETUP>; gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; }; /* Switch: AP mode */ - sw_ap { + button-sw-ap { label = "AP"; linux,code = <BTN_0>; gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; }; - eject { + button-eject { label = "USB eject"; linux,code = <KEY_EJECTCD>; gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/bcm4709-linksys-ea9200.dts b/dts/src/arm/bcm4709-linksys-ea9200.dts index 7879f7d7d9..99253fd7ad 100644 --- a/dts/src/arm/bcm4709-linksys-ea9200.dts +++ b/dts/src/arm/bcm4709-linksys-ea9200.dts @@ -29,16 +29,14 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - wps { + button-wps { label = "WPS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/bcm4709-netgear-r7000.dts b/dts/src/arm/bcm4709-netgear-r7000.dts index 56d309dbc6..de961fbb62 100644 --- a/dts/src/arm/bcm4709-netgear-r7000.dts +++ b/dts/src/arm/bcm4709-netgear-r7000.dts @@ -72,22 +72,20 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - wps { + button-wps { label = "WPS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; }; - rfkill { + button-rfkill { label = "WiFi"; linux,code = <KEY_RFKILL>; gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/bcm4709-netgear-r8000.dts b/dts/src/arm/bcm4709-netgear-r8000.dts index 89f992af61..087f7f60de 100644 --- a/dts/src/arm/bcm4709-netgear-r8000.dts +++ b/dts/src/arm/bcm4709-netgear-r8000.dts @@ -99,28 +99,26 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - rfkill { + button-rfkill { label = "WiFi"; linux,code = <KEY_RFKILL>; gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; }; - wps { + button-wps { label = "WPS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; }; - brightness { + button-brightness { label = "Backlight"; linux,code = <KEY_BRIGHTNESS_ZERO>; gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/bcm4709-tplink-archer-c9-v1.dts b/dts/src/arm/bcm4709-tplink-archer-c9-v1.dts index c2a266a439..11d1068160 100644 --- a/dts/src/arm/bcm4709-tplink-archer-c9-v1.dts +++ b/dts/src/arm/bcm4709-tplink-archer-c9-v1.dts @@ -77,16 +77,14 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - wps { + button-wps { label = "WPS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/bcm47094-asus-rt-ac88u.dts b/dts/src/arm/bcm47094-asus-rt-ac88u.dts index d850375834..a5fec56d11 100644 --- a/dts/src/arm/bcm47094-asus-rt-ac88u.dts +++ b/dts/src/arm/bcm47094-asus-rt-ac88u.dts @@ -72,25 +72,25 @@ gpio-keys { compatible = "gpio-keys"; - wps { + button-wps { label = "WPS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>; }; - reset { + button-reset { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; }; - wifi { + button-wifi { label = "Wi-Fi"; linux,code = <KEY_RFKILL>; gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; }; - led { + button-led { label = "Backlight"; linux,code = <KEY_BRIGHTNESS_ZERO>; gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/bcm47094-dlink-dir-885l.dts b/dts/src/arm/bcm47094-dlink-dir-885l.dts index 60bfd52ee6..2c38b642a8 100644 --- a/dts/src/arm/bcm47094-dlink-dir-885l.dts +++ b/dts/src/arm/bcm47094-dlink-dir-885l.dts @@ -86,20 +86,20 @@ gpio-keys { compatible = "gpio-keys"; - wps { + button-wps { label = "WPS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; }; /* Switch: router / extender */ - extender { + button-extender { label = "Extender"; linux,code = <BTN_0>; gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/bcm47094-linksys-panamera.dts b/dts/src/arm/bcm47094-linksys-panamera.dts index 9bef6b9bfa..86c7cc0fa7 100644 --- a/dts/src/arm/bcm47094-linksys-panamera.dts +++ b/dts/src/arm/bcm47094-linksys-panamera.dts @@ -30,19 +30,19 @@ gpio-keys { compatible = "gpio-keys"; - wps { + button-wps { label = "WPS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; }; - rfkill { + button-rfkill { label = "WiFi"; linux,code = <KEY_RFKILL>; gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>; }; - reset { + button-reset { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/bcm47094-luxul-abr-4500.dts b/dts/src/arm/bcm47094-luxul-abr-4500.dts index b51a0ee7e5..9ad15bcae1 100644 --- a/dts/src/arm/bcm47094-luxul-abr-4500.dts +++ b/dts/src/arm/bcm47094-luxul-abr-4500.dts @@ -49,7 +49,7 @@ gpio-keys { compatible = "gpio-keys"; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/bcm47094-luxul-xap-1610.dts b/dts/src/arm/bcm47094-luxul-xap-1610.dts index 6fa101f0a9..ee24d37685 100644 --- a/dts/src/arm/bcm47094-luxul-xap-1610.dts +++ b/dts/src/arm/bcm47094-luxul-xap-1610.dts @@ -43,7 +43,7 @@ gpio-keys { compatible = "gpio-keys"; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/bcm47094-luxul-xbr-4500.dts b/dts/src/arm/bcm47094-luxul-xbr-4500.dts index b959a9504e..6549d07b98 100644 --- a/dts/src/arm/bcm47094-luxul-xbr-4500.dts +++ b/dts/src/arm/bcm47094-luxul-xbr-4500.dts @@ -49,7 +49,7 @@ gpio-keys { compatible = "gpio-keys"; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/bcm47094-luxul-xwc-2000.dts b/dts/src/arm/bcm47094-luxul-xwc-2000.dts index b0d8a68814..654fcce9fd 100644 --- a/dts/src/arm/bcm47094-luxul-xwc-2000.dts +++ b/dts/src/arm/bcm47094-luxul-xwc-2000.dts @@ -34,10 +34,8 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/bcm47094-luxul-xwr-3100.dts b/dts/src/arm/bcm47094-luxul-xwr-3100.dts index cbe8c8e4a3..bf053a2fcc 100644 --- a/dts/src/arm/bcm47094-luxul-xwr-3100.dts +++ b/dts/src/arm/bcm47094-luxul-xwr-3100.dts @@ -89,7 +89,7 @@ gpio-keys { compatible = "gpio-keys"; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/bcm47094-luxul-xwr-3150-v1.dts b/dts/src/arm/bcm47094-luxul-xwr-3150-v1.dts index 9efcb24242..78a90dd57a 100644 --- a/dts/src/arm/bcm47094-luxul-xwr-3150-v1.dts +++ b/dts/src/arm/bcm47094-luxul-xwr-3150-v1.dts @@ -67,7 +67,7 @@ gpio-keys { compatible = "gpio-keys"; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/bcm47094-netgear-r8500.dts b/dts/src/arm/bcm47094-netgear-r8500.dts index 42097a4c26..f850dce37b 100644 --- a/dts/src/arm/bcm47094-netgear-r8500.dts +++ b/dts/src/arm/bcm47094-netgear-r8500.dts @@ -65,25 +65,25 @@ gpio-keys { compatible = "gpio-keys"; - brightness { + button-brightness { label = "Backlight"; linux,code = <KEY_BRIGHTNESS_ZERO>; gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; }; - wps { + button-wps { label = "WPS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; }; - rfkill { + button-rfkill { label = "WiFi"; linux,code = <KEY_RFKILL>; gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/bcm47094-phicomm-k3.dts b/dts/src/arm/bcm47094-phicomm-k3.dts index a2566ad461..3bf6e24978 100644 --- a/dts/src/arm/bcm47094-phicomm-k3.dts +++ b/dts/src/arm/bcm47094-phicomm-k3.dts @@ -22,7 +22,7 @@ gpio-keys { compatible = "gpio-keys"; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/bcm47189-luxul-xap-1440.dts b/dts/src/arm/bcm47189-luxul-xap-1440.dts index 57ca1cfaec..e20b6d2eb2 100644 --- a/dts/src/arm/bcm47189-luxul-xap-1440.dts +++ b/dts/src/arm/bcm47189-luxul-xap-1440.dts @@ -39,7 +39,7 @@ gpio-keys { compatible = "gpio-keys"; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/bcm47189-luxul-xap-810.dts b/dts/src/arm/bcm47189-luxul-xap-810.dts index 2e1a7e382c..9d863570fc 100644 --- a/dts/src/arm/bcm47189-luxul-xap-810.dts +++ b/dts/src/arm/bcm47189-luxul-xap-810.dts @@ -49,7 +49,7 @@ gpio-keys { compatible = "gpio-keys"; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/bcm47189-tenda-ac9.dts b/dts/src/arm/bcm47189-tenda-ac9.dts index 07eb3a8287..55b92645b0 100644 --- a/dts/src/arm/bcm47189-tenda-ac9.dts +++ b/dts/src/arm/bcm47189-tenda-ac9.dts @@ -59,19 +59,19 @@ gpio-keys { compatible = "gpio-keys"; - rfkill { + button-rfkill { label = "WiFi"; linux,code = <KEY_RFKILL>; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; }; - wps { + button-wps { label = "WPS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/bcm47622.dtsi b/dts/src/arm/bcm47622.dtsi index c016e12b73..2df04528af 100644 --- a/dts/src/arm/bcm47622.dtsi +++ b/dts/src/arm/bcm47622.dtsi @@ -32,6 +32,7 @@ next-level-cache = <&L2_0>; enable-method = "psci"; }; + CA7_2: cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a7"; @@ -39,6 +40,7 @@ next-level-cache = <&L2_0>; enable-method = "psci"; }; + CA7_3: cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a7"; @@ -46,6 +48,7 @@ next-level-cache = <&L2_0>; enable-method = "psci"; }; + L2_0: l2-cache0 { compatible = "cache"; }; @@ -76,6 +79,7 @@ #clock-cells = <0>; clock-frequency = <200000000>; }; + uart_clk: uart-clk { compatible = "fixed-factor-clock"; #clock-cells = <0>; @@ -88,23 +92,23 @@ psci { compatible = "arm,psci-0.2"; method = "smc"; - cpu_off = <1>; - cpu_on = <2>; }; axi@81000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges = <0 0x81000000 0x818000>; + ranges = <0 0x81000000 0x8000>; gic: interrupt-controller@1000 { compatible = "arm,cortex-a7-gic"; #interrupt-cells = <3>; - #address-cells = <0>; interrupt-controller; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; reg = <0x1000 0x1000>, - <0x2000 0x2000>; + <0x2000 0x2000>, + <0x4000 0x2000>, + <0x6000 0x2000>; }; }; diff --git a/dts/src/arm/bcm53015-meraki-mr26.dts b/dts/src/arm/bcm53015-meraki-mr26.dts new file mode 100644 index 0000000000..14f58033ef --- /dev/null +++ b/dts/src/arm/bcm53015-meraki-mr26.dts @@ -0,0 +1,166 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * DTS for Meraki MR26 / Codename: Venom + * + * Copyright (C) 2022 Christian Lamparter <chunkeey@gmail.com> + */ + +/dts-v1/; + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" +#include <dt-bindings/leds/common.h> + +/ { + compatible = "meraki,mr26", "brcm,bcm53015", "brcm,bcm4708"; + model = "Meraki MR26"; + + memory@0 { + reg = <0x00000000 0x08000000>; + device_type = "memory"; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + function = LED_FUNCTION_FAULT; + color = <LED_COLOR_ID_AMBER>; + gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>; + panic-indicator; + }; + led-1 { + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_WHITE>; + gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>; + }; + }; + + keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + key-restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&uart0 { + clock-frequency = <50000000>; + /delete-property/ clocks; +}; + +&uart1 { + status = "disabled"; +}; + +&gmac0 { + status = "okay"; +}; + +&gmac1 { + status = "disabled"; +}; +&gmac2 { + status = "disabled"; +}; +&gmac3 { + status = "disabled"; +}; + +&nandcs { + nand-ecc-algo = "hw"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <0x1>; + #size-cells = <0x1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x200000>; + read-only; + }; + + partition@200000 { + label = "u-boot-env"; + reg = <0x200000 0x200000>; + /* empty */ + }; + + partition@400000 { + label = "u-boot-backup"; + reg = <0x400000 0x200000>; + /* empty */ + }; + + partition@600000 { + label = "u-boot-env-backup"; + reg = <0x600000 0x200000>; + /* empty */ + }; + + partition@800000 { + label = "ubi"; + reg = <0x800000 0x7780000>; + }; + }; +}; + +&srab { + status = "okay"; + + ports { + port@0 { + reg = <0>; + label = "poe"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&gmac0>; + + fixed-link { + speed = <1000>; + duplex-full; + }; + }; + }; +}; + +&i2c0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_i2c>; + + clock-frequency = <100000>; + + ina219@40 { + compatible = "ti,ina219"; /* PoE power */ + reg = <0x40>; + shunt-resistor = <60000>; /* = 60 mOhms */ + }; + + eeprom@56 { + compatible = "atmel,24c64"; + reg = <0x56>; + pagesize = <32>; + read-only; + #address-cells = <1>; + #size-cells = <1>; + + /* it's empty */ + }; +}; + +&thermal { + status = "disabled"; + /* does not work, reads 418 degree Celsius */ +}; diff --git a/dts/src/arm/bcm53016-meraki-mr32.dts b/dts/src/arm/bcm53016-meraki-mr32.dts index daca63f251..e678bc03d8 100644 --- a/dts/src/arm/bcm53016-meraki-mr32.dts +++ b/dts/src/arm/bcm53016-meraki-mr32.dts @@ -47,10 +47,8 @@ keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/bcm5301x.dtsi b/dts/src/arm/bcm5301x.dtsi index 65f8a759f1..5fc1b847f4 100644 --- a/dts/src/arm/bcm5301x.dtsi +++ b/dts/src/arm/bcm5301x.dtsi @@ -568,9 +568,9 @@ trips { cpu-crit { - temperature = <125000>; - hysteresis = <0>; - type = "critical"; + temperature = <125000>; + hysteresis = <0>; + type = "critical"; }; }; diff --git a/dts/src/arm/bcm63138.dtsi b/dts/src/arm/bcm63138.dtsi index cca49a2e2d..b774a8d638 100644 --- a/dts/src/arm/bcm63138.dtsi +++ b/dts/src/arm/bcm63138.dtsi @@ -9,8 +9,8 @@ / { #address-cells = <1>; #size-cells = <1>; - compatible = "brcm,bcm63138"; - model = "Broadcom BCM63138 DSL SoC"; + compatible = "brcm,bcm63138", "brcm,bcmbca"; + model = "Broadcom BCM963138 Reference Board"; interrupt-parent = <&gic>; aliases { diff --git a/dts/src/arm/bcm63148.dtsi b/dts/src/arm/bcm63148.dtsi new file mode 100644 index 0000000000..df5307b6b3 --- /dev/null +++ b/dts/src/arm/bcm63148.dtsi @@ -0,0 +1,103 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + compatible = "brcm,bcm63148", "brcm,bcmbca"; + #address-cells = <1>; + #size-cells = <1>; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + B15_0: cpu@0 { + device_type = "cpu"; + compatible = "brcm,brahma-b15"; + reg = <0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + B15_1: cpu@1 { + device_type = "cpu"; + compatible = "brcm,brahma-b15"; + reg = <0x1>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + }; + + pmu: pmu { + compatible = "arm,cortex-a15-pmu"; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&B15_0>, <&B15_1>; + }; + + clocks: clocks { + periph_clk: periph-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + axi@80030000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x80030000 0x8000>; + + gic: interrupt-controller@1000 { + compatible = "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x1000 0x1000>, + <0x2000 0x2000>, + <0x4000 0x2000>, + <0x6000 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + }; + + bus@ff800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xfffe8000 0x8000>; + + uart0: serial@600 { + compatible = "brcm,bcm6345-uart"; + reg = <0x600 0x20>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&periph_clk>; + clock-names = "refclk"; + status = "disabled"; + }; + }; +}; diff --git a/dts/src/arm/bcm63178.dtsi b/dts/src/arm/bcm63178.dtsi new file mode 100644 index 0000000000..5463443f07 --- /dev/null +++ b/dts/src/arm/bcm63178.dtsi @@ -0,0 +1,118 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + compatible = "brcm,bcm63178", "brcm,bcmbca"; + #address-cells = <1>; + #size-cells = <1>; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CA7_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + CA7_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x1>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + CA7_2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x2>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + L2_0: l2-cache0 { + compatible = "cache"; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + arm,cpu-registers-not-fw-configured; + }; + + pmu: pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&CA7_0>, <&CA7_1>, + <&CA7_2>; + }; + + clocks: clocks { + periph_clk: periph-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + uart_clk: uart-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&periph_clk>; + clock-div = <4>; + clock-mult = <1>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + cpu_off = <1>; + cpu_on = <2>; + }; + + axi@81000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x81000000 0x4000>; + + gic: interrupt-controller@1000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x1000 0x1000>, + <0x2000 0x2000>; + }; + }; + + bus@ff800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xff800000 0x800000>; + + uart0: serial@12000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x12000 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart_clk>, <&uart_clk>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + }; +}; diff --git a/dts/src/arm/bcm6756.dtsi b/dts/src/arm/bcm6756.dtsi new file mode 100644 index 0000000000..ce1b59faf8 --- /dev/null +++ b/dts/src/arm/bcm6756.dtsi @@ -0,0 +1,130 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + compatible = "brcm,bcm6756", "brcm,bcmbca"; + #address-cells = <1>; + #size-cells = <1>; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CA7_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + CA7_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x1>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + CA7_2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x2>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + CA7_3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x3>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + arm,cpu-registers-not-fw-configured; + }; + + pmu: pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&CA7_0>, <&CA7_1>, + <&CA7_2>, <&CA7_3>; + }; + + clocks: clocks { + periph_clk: periph-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + + uart_clk: uart-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&periph_clk>; + clock-div = <4>; + clock-mult = <1>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + axi@81000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x81000000 0x8000>; + + gic: interrupt-controller@1000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + reg = <0x1000 0x1000>, + <0x2000 0x2000>, + <0x4000 0x2000>, + <0x6000 0x2000>; + }; + }; + + bus@ff800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xff800000 0x800000>; + + uart0: serial@12000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x12000 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart_clk>, <&uart_clk>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + }; +}; diff --git a/dts/src/arm/bcm6846.dtsi b/dts/src/arm/bcm6846.dtsi new file mode 100644 index 0000000000..e610c10249 --- /dev/null +++ b/dts/src/arm/bcm6846.dtsi @@ -0,0 +1,103 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + compatible = "brcm,bcm6846", "brcm,bcmbca"; + #address-cells = <1>; + #size-cells = <1>; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CA7_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + CA7_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x1>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + arm,cpu-registers-not-fw-configured; + }; + + pmu: pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&CA7_0>, <&CA7_1>; + }; + + clocks: clocks { + periph_clk: periph-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + cpu_off = <1>; + cpu_on = <2>; + }; + + axi@81000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x81000000 0x4000>; + + gic: interrupt-controller@1000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x1000 0x1000>, + <0x2000 0x2000>; + }; + }; + + bus@ff800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xff800000 0x800000>; + + uart0: serial@640 { + compatible = "brcm,bcm6345-uart"; + reg = <0x640 0x1b>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&periph_clk>; + clock-names = "refclk"; + status = "disabled"; + }; + }; +}; diff --git a/dts/src/arm/bcm6855.dtsi b/dts/src/arm/bcm6855.dtsi new file mode 100644 index 0000000000..620f51aee1 --- /dev/null +++ b/dts/src/arm/bcm6855.dtsi @@ -0,0 +1,120 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + compatible = "brcm,bcm6855", "brcm,bcmbca"; + #address-cells = <1>; + #size-cells = <1>; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CA7_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + CA7_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x1>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + CA7_2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x2>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>; + arm,cpu-registers-not-fw-configured; + }; + + pmu: pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&CA7_0>, <&CA7_1>, <&CA7_2>; + }; + + clocks: clocks { + periph_clk: periph-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + + uart_clk: uart-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&periph_clk>; + clock-div = <4>; + clock-mult = <1>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + axi@81000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x81000000 0x8000>; + + gic: interrupt-controller@1000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_HIGH)>; + reg = <0x1000 0x1000>, + <0x2000 0x2000>, + <0x4000 0x2000>, + <0x6000 0x2000>; + }; + }; + + bus@ff800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xff800000 0x800000>; + + uart0: serial@12000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x12000 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart_clk>, <&uart_clk>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + }; +}; diff --git a/dts/src/arm/bcm6878.dtsi b/dts/src/arm/bcm6878.dtsi new file mode 100644 index 0000000000..a7dff596fe --- /dev/null +++ b/dts/src/arm/bcm6878.dtsi @@ -0,0 +1,110 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + compatible = "brcm,bcm6878", "brcm,bcmbca"; + #address-cells = <1>; + #size-cells = <1>; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CA7_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + CA7_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x1>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + L2_0: l2-cache0 { + compatible = "cache"; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + arm,cpu-registers-not-fw-configured; + }; + + pmu: pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&CA7_0>, <&CA7_1>; + }; + + clocks: clocks { + periph_clk: periph-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + uart_clk: uart-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&periph_clk>; + clock-div = <4>; + clock-mult = <1>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + axi@81000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x81000000 0x8000>; + + gic: interrupt-controller@1000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x1000 0x1000>, + <0x2000 0x2000>, + <0x4000 0x2000>, + <0x6000 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + }; + + bus@ff800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xff800000 0x800000>; + + uart0: serial@12000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x12000 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart_clk>, <&uart_clk>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + }; +}; diff --git a/dts/src/arm/bcm911360_entphn.dts b/dts/src/arm/bcm911360_entphn.dts index a76c74b44b..363009e747 100644 --- a/dts/src/arm/bcm911360_entphn.dts +++ b/dts/src/arm/bcm911360_entphn.dts @@ -47,10 +47,10 @@ stdout-path = "serial0:115200n8"; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - hook { + button-hook { label = "HOOK"; linux,code = <KEY_O>; gpios = <&gpio_asiu 48 0>; diff --git a/dts/src/arm/bcm947189acdbmr.dts b/dts/src/arm/bcm947189acdbmr.dts index b0b8c774a3..16e70a264f 100644 --- a/dts/src/arm/bcm947189acdbmr.dts +++ b/dts/src/arm/bcm947189acdbmr.dts @@ -44,13 +44,13 @@ gpio-keys { compatible = "gpio-keys"; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>; }; - wps { + button-wps { label = "WPS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/bcm953012er.dts b/dts/src/arm/bcm953012er.dts index dd63a148a1..4fe3b36533 100644 --- a/dts/src/arm/bcm953012er.dts +++ b/dts/src/arm/bcm953012er.dts @@ -47,13 +47,13 @@ gpio-keys { compatible = "gpio-keys"; - wps { + button-wps { label = "WPS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/bcm958625-meraki-alamo.dtsi b/dts/src/arm/bcm958625-meraki-alamo.dtsi index 58b7d9fc75..c54451dde6 100644 --- a/dts/src/arm/bcm958625-meraki-alamo.dtsi +++ b/dts/src/arm/bcm958625-meraki-alamo.dtsi @@ -13,7 +13,7 @@ autorepeat; poll-interval = <20>; - reset { + button-reset { label = "reset"; linux,code = <KEY_RESTART>; gpios = <&gpioa 8 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/bcm958625-meraki-kingpin.dtsi b/dts/src/arm/bcm958625-meraki-kingpin.dtsi index 576cfc5256..1830844c84 100644 --- a/dts/src/arm/bcm958625-meraki-kingpin.dtsi +++ b/dts/src/arm/bcm958625-meraki-kingpin.dtsi @@ -14,7 +14,7 @@ autorepeat; poll-interval = <20>; - reset { + button-reset { label = "reset"; linux,code = <KEY_RESTART>; gpios = <&gpioa 6 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/bcm963138.dts b/dts/src/arm/bcm963138.dts new file mode 100644 index 0000000000..d28c4f130c --- /dev/null +++ b/dts/src/arm/bcm963138.dts @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm63138.dtsi" + +/ { + model = "Broadcom BCM963138 Reference Board"; + compatible = "brcm,bcm963138", "brcm,bcm63138", "brcm,bcmbca"; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = &serial0; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x08000000>; + }; +}; + +&serial0 { + status = "okay"; +}; diff --git a/dts/src/arm/bcm963138dvt.dts b/dts/src/arm/bcm963138dvt.dts index df5c8ab906..15bec75be7 100644 --- a/dts/src/arm/bcm963138dvt.dts +++ b/dts/src/arm/bcm963138dvt.dts @@ -8,7 +8,7 @@ #include "bcm63138.dtsi" / { - compatible = "brcm,BCM963138DVT", "brcm,bcm63138"; + compatible = "brcm,BCM963138DVT", "brcm,bcm63138", "brcm,bcmbca"; model = "Broadcom BCM963138DVT"; chosen { diff --git a/dts/src/arm/bcm963148.dts b/dts/src/arm/bcm963148.dts new file mode 100644 index 0000000000..98f6a6d09f --- /dev/null +++ b/dts/src/arm/bcm963148.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm63148.dtsi" + +/ { + model = "Broadcom BCM963148 Reference Board"; + compatible = "brcm,bcm963148", "brcm,bcm63148", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/dts/src/arm/bcm963178.dts b/dts/src/arm/bcm963178.dts new file mode 100644 index 0000000000..fa096e9cde --- /dev/null +++ b/dts/src/arm/bcm963178.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm63178.dtsi" + +/ { + model = "Broadcom BCM963178 Reference Board"; + compatible = "brcm,bcm963178", "brcm,bcm63178", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/dts/src/arm/bcm96756.dts b/dts/src/arm/bcm96756.dts new file mode 100644 index 0000000000..9a4a87ba9c --- /dev/null +++ b/dts/src/arm/bcm96756.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm6756.dtsi" + +/ { + model = "Broadcom BCM96756 Reference Board"; + compatible = "brcm,bcm96756", "brcm,bcm6756", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/dts/src/arm/bcm96846.dts b/dts/src/arm/bcm96846.dts new file mode 100644 index 0000000000..c70ebccabc --- /dev/null +++ b/dts/src/arm/bcm96846.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm6846.dtsi" + +/ { + model = "Broadcom BCM96846 Reference Board"; + compatible = "brcm,bcm96846", "brcm,bcm6846", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/dts/src/arm/bcm96855.dts b/dts/src/arm/bcm96855.dts new file mode 100644 index 0000000000..4438152561 --- /dev/null +++ b/dts/src/arm/bcm96855.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm6855.dtsi" + +/ { + model = "Broadcom BCM96855 Reference Board"; + compatible = "brcm,bcm96855", "brcm,bcm6855", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/dts/src/arm/bcm96878.dts b/dts/src/arm/bcm96878.dts new file mode 100644 index 0000000000..8fbc175cb4 --- /dev/null +++ b/dts/src/arm/bcm96878.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm6878.dtsi" + +/ { + model = "Broadcom BCM96878 Reference Board"; + compatible = "brcm,bcm96878", "brcm,bcm6878", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/dts/src/arm/da850-evm.dts b/dts/src/arm/da850-evm.dts index e9aecac4f5..1fdd9a2491 100644 --- a/dts/src/arm/da850-evm.dts +++ b/dts/src/arm/da850-evm.dts @@ -52,15 +52,15 @@ enable-gpios = <&gpio 40 GPIO_ACTIVE_HIGH>; /* lcd_panel_pwr */ panel-info { - ac-bias = <255>; - ac-bias-intrpt = <0>; - dma-burst-sz = <16>; - bpp = <16>; - fdd = <0x80>; - sync-edge = <0>; - sync-ctrl = <1>; - raster-order = <0>; - fifo-th = <0>; + ac-bias = <255>; + ac-bias-intrpt = <0>; + dma-burst-sz = <16>; + bpp = <16>; + fdd = <0x80>; + sync-edge = <0>; + sync-ctrl = <1>; + raster-order = <0>; + fifo-th = <0>; }; display-timings { diff --git a/dts/src/arm/da850.dtsi b/dts/src/arm/da850.dtsi index 0386376fa4..e46e4d22db 100644 --- a/dts/src/arm/da850.dtsi +++ b/dts/src/arm/da850.dtsi @@ -419,7 +419,7 @@ edma0: edma@0 { compatible = "ti,edma3-tpcc"; /* eDMA3 CC0: 0x01c0 0000 - 0x01c0 7fff */ - reg = <0x0 0x8000>; + reg = <0x0 0x8000>; reg-names = "edma3_cc"; interrupts = <11 12>; interrupt-names = "edma3_ccint", "edma3_ccerrint"; @@ -430,14 +430,14 @@ }; edma0_tptc0: tptc@8000 { compatible = "ti,edma3-tptc"; - reg = <0x8000 0x400>; + reg = <0x8000 0x400>; interrupts = <13>; interrupt-names = "edm3_tcerrint"; power-domains = <&psc0 1>; }; edma0_tptc1: tptc@8400 { compatible = "ti,edma3-tptc"; - reg = <0x8400 0x400>; + reg = <0x8400 0x400>; interrupts = <32>; interrupt-names = "edm3_tcerrint"; power-domains = <&psc0 2>; @@ -445,7 +445,7 @@ edma1: edma@230000 { compatible = "ti,edma3-tpcc"; /* eDMA3 CC1: 0x01e3 0000 - 0x01e3 7fff */ - reg = <0x230000 0x8000>; + reg = <0x230000 0x8000>; reg-names = "edma3_cc"; interrupts = <93 94>; interrupt-names = "edma3_ccint", "edma3_ccerrint"; @@ -456,7 +456,7 @@ }; edma1_tptc0: tptc@238000 { compatible = "ti,edma3-tptc"; - reg = <0x238000 0x400>; + reg = <0x238000 0x400>; interrupts = <95>; interrupt-names = "edm3_tcerrint"; power-domains = <&psc1 21>; @@ -672,7 +672,7 @@ cppi41dma: dma-controller@201000 { compatible = "ti,da830-cppi41"; - reg = <0x201000 0x1000 + reg = <0x201000 0x1000 0x202000 0x1000 0x204000 0x4000>; reg-names = "controller", diff --git a/dts/src/arm/dm8148-evm.dts b/dts/src/arm/dm8148-evm.dts index 8ef48c00f9..fe3f9a970b 100644 --- a/dts/src/arm/dm8148-evm.dts +++ b/dts/src/arm/dm8148-evm.dts @@ -51,7 +51,7 @@ interrupt-parent = <&gpmc>; interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ <1 IRQ_TYPE_NONE>; /* termcount */ - linux,mtd-name= "micron,mt29f2g16aadwp"; + linux,mtd-name = "micron,mt29f2g16aadwp"; #address-cells = <1>; #size-cells = <1>; ti,nand-ecc-opt = "bch8"; diff --git a/dts/src/arm/dm814x.dtsi b/dts/src/arm/dm814x.dtsi index a92630113f..8104969c67 100644 --- a/dts/src/arm/dm814x.dtsi +++ b/dts/src/arm/dm814x.dtsi @@ -1,8 +1,4 @@ -/* - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ +// SPDX-License-Identifier: GPL-2.0-only #include <dt-bindings/bus/ti-sysc.h> #include <dt-bindings/clock/dm814.h> diff --git a/dts/src/arm/dm8168-evm.dts b/dts/src/arm/dm8168-evm.dts index 778796c10a..244a957f9b 100644 --- a/dts/src/arm/dm8168-evm.dts +++ b/dts/src/arm/dm8168-evm.dts @@ -119,7 +119,7 @@ nand@0,0 { compatible = "ti,omap2-nand"; - linux,mtd-name= "micron,mt29f2g16aadwp"; + linux,mtd-name = "micron,mt29f2g16aadwp"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ interrupt-parent = <&gpmc>; interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ diff --git a/dts/src/arm/dm816x.dtsi b/dts/src/arm/dm816x.dtsi index eb0a95da94..649b331944 100644 --- a/dts/src/arm/dm816x.dtsi +++ b/dts/src/arm/dm816x.dtsi @@ -1,8 +1,4 @@ -/* - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ +// SPDX-License-Identifier: GPL-2.0-only #include <dt-bindings/bus/ti-sysc.h> #include <dt-bindings/clock/dm816.h> diff --git a/dts/src/arm/dra62x-j5eco-evm.dts b/dts/src/arm/dra62x-j5eco-evm.dts index c16e183822..577114c4c2 100644 --- a/dts/src/arm/dra62x-j5eco-evm.dts +++ b/dts/src/arm/dra62x-j5eco-evm.dts @@ -51,7 +51,7 @@ interrupt-parent = <&gpmc>; interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ <1 IRQ_TYPE_NONE>; /* termcount */ - linux,mtd-name= "micron,mt29f2g16aadwp"; + linux,mtd-name = "micron,mt29f2g16aadwp"; #address-cells = <1>; #size-cells = <1>; ti,nand-ecc-opt = "bch8"; diff --git a/dts/src/arm/dra62x.dtsi b/dts/src/arm/dra62x.dtsi index cc4878aaa8..cfefa67051 100644 --- a/dts/src/arm/dra62x.dtsi +++ b/dts/src/arm/dra62x.dtsi @@ -1,8 +1,4 @@ -/* - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ +// SPDX-License-Identifier: GPL-2.0-only #include "dm814x.dtsi" diff --git a/dts/src/arm/dra7-dspeve-thermal.dtsi b/dts/src/arm/dra7-dspeve-thermal.dtsi index e75569383d..747ff0db90 100644 --- a/dts/src/arm/dra7-dspeve-thermal.dtsi +++ b/dts/src/arm/dra7-dspeve-thermal.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for DRA7x SoC DSPEVE thermal * * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/ - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/thermal/thermal.h> diff --git a/dts/src/arm/dra7-iva-thermal.dtsi b/dts/src/arm/dra7-iva-thermal.dtsi index a707732161..0a31313065 100644 --- a/dts/src/arm/dra7-iva-thermal.dtsi +++ b/dts/src/arm/dra7-iva-thermal.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for DRA7x SoC IVA thermal * * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/ - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/thermal/thermal.h> diff --git a/dts/src/arm/dra72x-mmc-iodelay.dtsi b/dts/src/arm/dra72x-mmc-iodelay.dtsi index a9dce919d4..34eea3c048 100644 --- a/dts/src/arm/dra72x-mmc-iodelay.dtsi +++ b/dts/src/arm/dra72x-mmc-iodelay.dtsi @@ -1,16 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * MMC IOdelay values for TI's DRA72x, DRA71x and AM571x SoCs. * * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/ - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ /* diff --git a/dts/src/arm/dra74x-mmc-iodelay.dtsi b/dts/src/arm/dra74x-mmc-iodelay.dtsi index e86da7a970..b9d040135c 100644 --- a/dts/src/arm/dra74x-mmc-iodelay.dtsi +++ b/dts/src/arm/dra74x-mmc-iodelay.dtsi @@ -1,16 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * MMC IOdelay values for TI's DRA74x, DRA75x and AM572x SoCs. * * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/ - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ /* diff --git a/dts/src/arm/dra76x.dtsi b/dts/src/arm/dra76x.dtsi index bc4ae91cba..931db7932c 100644 --- a/dts/src/arm/dra76x.dtsi +++ b/dts/src/arm/dra76x.dtsi @@ -90,8 +90,8 @@ clocks = <&dpll_gmac_x2_ck>; ti,max-div = <63>; reg = <0x03fc>; - ti,bit-shift=<20>; - ti,latch-bit=<26>; + ti,bit-shift = <20>; + ti,latch-bit = <26>; assigned-clocks = <&dpll_gmac_h14x2_ctrl_ck>; assigned-clock-rates = <80000000>; }; @@ -102,7 +102,7 @@ clocks = <&dpll_gmac_ck>, <&dpll_gmac_h14x2_ctrl_ck>; reg = <0x3fc>; ti,bit-shift = <29>; - ti,latch-bit=<26>; + ti,latch-bit = <26>; assigned-clocks = <&dpll_gmac_h14x2_ctrl_mux_ck>; assigned-clock-parents = <&dpll_gmac_h14x2_ctrl_ck>; }; diff --git a/dts/src/arm/e60k02.dtsi b/dts/src/arm/e60k02.dtsi index 1a49f15f2d..935e2359f8 100644 --- a/dts/src/arm/e60k02.dtsi +++ b/dts/src/arm/e60k02.dtsi @@ -22,14 +22,14 @@ gpio_keys: gpio-keys { compatible = "gpio-keys"; - power { + key-power { label = "Power"; gpios = <&gpio5 8 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; wakeup-source; }; - cover { + key-cover { label = "Cover"; gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; linux,code = <SW_LID>; diff --git a/dts/src/arm/e70k02.dtsi b/dts/src/arm/e70k02.dtsi index 156de653f2..27ef9a62b2 100644 --- a/dts/src/arm/e70k02.dtsi +++ b/dts/src/arm/e70k02.dtsi @@ -26,14 +26,14 @@ gpio_keys: gpio-keys { compatible = "gpio-keys"; - power { + key-power { label = "Power"; gpios = <&gpio4 25 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; wakeup-source; }; - cover { + key-cover { label = "Cover"; gpios = <&gpio4 23 GPIO_ACTIVE_LOW>; linux,code = <SW_LID>; @@ -41,13 +41,13 @@ wakeup-source; }; - pageup { + key-pageup { label = "PageUp"; gpios = <&gpio4 0 GPIO_ACTIVE_LOW>; linux,code = <KEY_PAGEUP>; }; - pagedown { + key-pagedown { label = "PageDown"; gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; linux,code = <KEY_PAGEDOWN>; diff --git a/dts/src/arm/ecx-common.dtsi b/dts/src/arm/ecx-common.dtsi index 57a028a693..ce5221c6b3 100644 --- a/dts/src/arm/ecx-common.dtsi +++ b/dts/src/arm/ecx-common.dtsi @@ -9,11 +9,11 @@ }; psci { - compatible = "arm,psci"; - method = "smc"; - cpu_suspend = <0x84000002>; - cpu_off = <0x84000004>; - cpu_on = <0x84000006>; + compatible = "arm,psci"; + method = "smc"; + cpu_suspend = <0x84000002>; + cpu_off = <0x84000004>; + cpu_on = <0x84000006>; }; soc { diff --git a/dts/src/arm/en7523-evb.dts b/dts/src/arm/en7523-evb.dts index a8d8bb0419..f23a25cce1 100644 --- a/dts/src/arm/en7523-evb.dts +++ b/dts/src/arm/en7523-evb.dts @@ -33,3 +33,11 @@ &gpio1 { status = "okay"; }; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; diff --git a/dts/src/arm/en7523.dtsi b/dts/src/arm/en7523.dtsi index 36597f587f..7f839331a7 100644 --- a/dts/src/arm/en7523.dtsi +++ b/dts/src/arm/en7523.dtsi @@ -3,6 +3,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clock/en7523-clk.h> / { interrupt-parent = <&gic>; @@ -83,6 +84,13 @@ }; }; + scu: system-controller@1fa20000 { + compatible = "airoha,en7523-scu"; + reg = <0x1fa20000 0x400>, + <0x1fb00000 0x1000>; + #clock-cells = <1>; + }; + gic: interrupt-controller@9000000 { compatible = "arm,gic-v3"; interrupt-controller; @@ -135,4 +143,62 @@ gpio-controller; #gpio-cells = <2>; }; + + pcie0: pcie@1fa91000 { + compatible = "airoha,en7523-pcie", "mediatek,mt7622-pcie"; + device_type = "pci"; + reg = <0x1fa91000 0x1000>; + reg-names = "port0"; + linux,pci-domain = <0>; + #address-cells = <3>; + #size-cells = <2>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pcie_irq"; + clocks = <&scu EN7523_CLK_PCIE>; + clock-names = "sys_ck0"; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x20000000 0x20000000 0 0x8000000>; + status = "disabled"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc0 0>, + <0 0 0 2 &pcie_intc0 1>, + <0 0 0 3 &pcie_intc0 2>, + <0 0 0 4 &pcie_intc0 3>; + pcie_intc0: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + + pcie1: pcie@1fa92000 { + compatible = "airoha,en7523-pcie", "mediatek,mt7622-pcie"; + device_type = "pci"; + reg = <0x1fa92000 0x1000>; + reg-names = "port1"; + linux,pci-domain = <1>; + #address-cells = <3>; + #size-cells = <2>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pcie_irq"; + clocks = <&scu EN7523_CLK_PCIE>; + clock-names = "sys_ck1"; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x28000000 0x28000000 0 0x8000000>; + status = "disabled"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc1 0>, + <0 0 0 2 &pcie_intc1 1>, + <0 0 0 3 &pcie_intc1 2>, + <0 0 0 4 &pcie_intc1 3>; + pcie_intc1: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; }; diff --git a/dts/src/arm/exynos-pinctrl.h b/dts/src/arm/exynos-pinctrl.h new file mode 100644 index 0000000000..e3a6df9528 --- /dev/null +++ b/dts/src/arm/exynos-pinctrl.h @@ -0,0 +1,55 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Samsung Exynos DTS pinctrl constants + * + * Copyright (c) 2016 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Copyright (c) 2022 Linaro Ltd + * Author: Krzysztof Kozlowski <krzk@kernel.org> + */ + +#ifndef __DTS_ARM_SAMSUNG_EXYNOS_PINCTRL_H__ +#define __DTS_ARM_SAMSUNG_EXYNOS_PINCTRL_H__ + +#define EXYNOS_PIN_PULL_NONE 0 +#define EXYNOS_PIN_PULL_DOWN 1 +#define EXYNOS_PIN_PULL_UP 3 + +/* Pin function in power down mode */ +#define EXYNOS_PIN_PDN_OUT0 0 +#define EXYNOS_PIN_PDN_OUT1 1 +#define EXYNOS_PIN_PDN_INPUT 2 +#define EXYNOS_PIN_PDN_PREV 3 + +/* Drive strengths for Exynos3250, Exynos4 (all) and Exynos5250 */ +#define EXYNOS4_PIN_DRV_LV1 0 +#define EXYNOS4_PIN_DRV_LV2 2 +#define EXYNOS4_PIN_DRV_LV3 1 +#define EXYNOS4_PIN_DRV_LV4 3 + +/* Drive strengths for Exynos5260 */ +#define EXYNOS5260_PIN_DRV_LV1 0 +#define EXYNOS5260_PIN_DRV_LV2 1 +#define EXYNOS5260_PIN_DRV_LV4 2 +#define EXYNOS5260_PIN_DRV_LV6 3 + +/* + * Drive strengths for Exynos5410, Exynos542x, Exynos5800 and Exynos850 (except + * GPIO_HSI block) + */ +#define EXYNOS5420_PIN_DRV_LV1 0 +#define EXYNOS5420_PIN_DRV_LV2 1 +#define EXYNOS5420_PIN_DRV_LV3 2 +#define EXYNOS5420_PIN_DRV_LV4 3 + +#define EXYNOS_PIN_FUNC_INPUT 0 +#define EXYNOS_PIN_FUNC_OUTPUT 1 +#define EXYNOS_PIN_FUNC_2 2 +#define EXYNOS_PIN_FUNC_3 3 +#define EXYNOS_PIN_FUNC_4 4 +#define EXYNOS_PIN_FUNC_5 5 +#define EXYNOS_PIN_FUNC_6 6 +#define EXYNOS_PIN_FUNC_EINT 0xf +#define EXYNOS_PIN_FUNC_F EXYNOS_PIN_FUNC_EINT + +#endif /* __DTS_ARM_SAMSUNG_EXYNOS_PINCTRL_H__ */ diff --git a/dts/src/arm/exynos3250-artik5.dtsi b/dts/src/arm/exynos3250-artik5.dtsi index 7b429622a2..0ac3f284fb 100644 --- a/dts/src/arm/exynos3250-artik5.dtsi +++ b/dts/src/arm/exynos3250-artik5.dtsi @@ -357,7 +357,7 @@ &pinctrl_1 { bten: bten-pins { - samsung,pins ="gpx1-7"; + samsung,pins = "gpx1-7"; samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>; diff --git a/dts/src/arm/exynos3250-pinctrl.dtsi b/dts/src/arm/exynos3250-pinctrl.dtsi index cc30d154ec..011ba2eff2 100644 --- a/dts/src/arm/exynos3250-pinctrl.dtsi +++ b/dts/src/arm/exynos3250-pinctrl.dtsi @@ -9,7 +9,7 @@ * tree nodes are listed in this file. */ -#include <dt-bindings/pinctrl/samsung.h> +#include "exynos-pinctrl.h" #define PIN_IN(_pin, _pull, _drv) \ pin- ## _pin { \ diff --git a/dts/src/arm/exynos3250.dtsi b/dts/src/arm/exynos3250.dtsi index 78dad233ff..326b9e0ed8 100644 --- a/dts/src/arm/exynos3250.dtsi +++ b/dts/src/arm/exynos3250.dtsi @@ -376,7 +376,7 @@ status = "disabled"; }; - mshc_0: mshc@12510000 { + mshc_0: mmc@12510000 { compatible = "samsung,exynos5420-dw-mshc"; reg = <0x12510000 0x1000>; interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; @@ -388,7 +388,7 @@ status = "disabled"; }; - mshc_1: mshc@12520000 { + mshc_1: mmc@12520000 { compatible = "samsung,exynos5420-dw-mshc"; reg = <0x12520000 0x1000>; interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; @@ -400,7 +400,7 @@ status = "disabled"; }; - mshc_2: mshc@12530000 { + mshc_2: mmc@12530000 { compatible = "samsung,exynos5250-dw-mshc"; reg = <0x12530000 0x1000>; interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; diff --git a/dts/src/arm/exynos4.dtsi b/dts/src/arm/exynos4.dtsi index 6f0ca3354e..5c4ecda27a 100644 --- a/dts/src/arm/exynos4.dtsi +++ b/dts/src/arm/exynos4.dtsi @@ -316,7 +316,7 @@ status = "disabled"; }; - sdhci_0: sdhci@12510000 { + sdhci_0: mmc@12510000 { compatible = "samsung,exynos4210-sdhci"; reg = <0x12510000 0x100>; interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; @@ -325,7 +325,7 @@ status = "disabled"; }; - sdhci_1: sdhci@12520000 { + sdhci_1: mmc@12520000 { compatible = "samsung,exynos4210-sdhci"; reg = <0x12520000 0x100>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; @@ -334,7 +334,7 @@ status = "disabled"; }; - sdhci_2: sdhci@12530000 { + sdhci_2: mmc@12530000 { compatible = "samsung,exynos4210-sdhci"; reg = <0x12530000 0x100>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; @@ -343,7 +343,7 @@ status = "disabled"; }; - sdhci_3: sdhci@12540000 { + sdhci_3: mmc@12540000 { compatible = "samsung,exynos4210-sdhci"; reg = <0x12540000 0x100>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; diff --git a/dts/src/arm/exynos4210-i9100.dts b/dts/src/arm/exynos4210-i9100.dts index 3c0a18b308..bba85011ec 100644 --- a/dts/src/arm/exynos4210-i9100.dts +++ b/dts/src/arm/exynos4210-i9100.dts @@ -89,21 +89,21 @@ gpio-keys { compatible = "gpio-keys"; - vol-down { + key-vol-down { gpios = <&gpx2 1 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; label = "volume down"; debounce-interval = <10>; }; - vol-up { + key-vol-up { gpios = <&gpx2 0 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; label = "volume up"; debounce-interval = <10>; }; - power { + key-power { gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; label = "power"; @@ -111,7 +111,7 @@ wakeup-source; }; - ok { + key-ok { gpios = <&gpx3 5 GPIO_ACTIVE_LOW>; linux,code = <KEY_OK>; label = "ok"; diff --git a/dts/src/arm/exynos4210-origen.dts b/dts/src/arm/exynos4210-origen.dts index a08ce2f37e..5f37b751f7 100644 --- a/dts/src/arm/exynos4210-origen.dts +++ b/dts/src/arm/exynos4210-origen.dts @@ -15,6 +15,7 @@ #include "exynos4210.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> #include "exynos-mfc-reserved-memory.dtsi" / { @@ -46,35 +47,35 @@ gpio-keys { compatible = "gpio-keys"; - up { + key-up { label = "Up"; gpios = <&gpx2 0 GPIO_ACTIVE_LOW>; linux,code = <KEY_UP>; wakeup-source; }; - down { + key-down { label = "Down"; gpios = <&gpx2 1 GPIO_ACTIVE_LOW>; linux,code = <KEY_DOWN>; wakeup-source; }; - back { + key-back { label = "Back"; gpios = <&gpx1 7 GPIO_ACTIVE_LOW>; linux,code = <KEY_BACK>; wakeup-source; }; - home { + key-home { label = "Home"; gpios = <&gpx1 6 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOME>; wakeup-source; }; - menu { + key-menu { label = "Menu"; gpios = <&gpx1 5 GPIO_ACTIVE_LOW>; linux,code = <KEY_MENU>; @@ -86,6 +87,7 @@ compatible = "gpio-leds"; status { gpios = <&gpx1 3 GPIO_ACTIVE_LOW>; + function = LED_FUNCTION_HEARTBEAT; linux,default-trigger = "heartbeat"; }; }; diff --git a/dts/src/arm/exynos4210-pinctrl.dtsi b/dts/src/arm/exynos4210-pinctrl.dtsi index 6373009bb7..76f44ae0de 100644 --- a/dts/src/arm/exynos4210-pinctrl.dtsi +++ b/dts/src/arm/exynos4210-pinctrl.dtsi @@ -11,7 +11,7 @@ * tree nodes are listed in this file. */ -#include <dt-bindings/pinctrl/samsung.h> +#include "exynos-pinctrl.h" &pinctrl_0 { gpa0: gpa0-gpio-bank { diff --git a/dts/src/arm/exynos4210-trats.dts b/dts/src/arm/exynos4210-trats.dts index 01f44d95f6..b8e9dd23fc 100644 --- a/dts/src/arm/exynos4210-trats.dts +++ b/dts/src/arm/exynos4210-trats.dts @@ -180,7 +180,7 @@ vdd3-supply = <&vcclcd_reg>; vci-supply = <&vlcd_reg>; reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>; - power-on-delay= <50>; + power-on-delay = <50>; reset-delay = <100>; init-delay = <100>; flip-horizontal; diff --git a/dts/src/arm/exynos4412-galaxy-s3.dtsi b/dts/src/arm/exynos4412-galaxy-s3.dtsi index 03dffc690b..94122e9c66 100644 --- a/dts/src/arm/exynos4412-galaxy-s3.dtsi +++ b/dts/src/arm/exynos4412-galaxy-s3.dtsi @@ -7,6 +7,7 @@ */ /dts-v1/; +#include <dt-bindings/leds/common.h> #include "exynos4412-midas.dtsi" / { @@ -25,8 +26,9 @@ pinctrl-1 = <&camera_flash_host>; pinctrl-2 = <&camera_flash_isp>; - flash-led { - label = "flash"; + led { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; led-max-microamp = <520833>; flash-max-microamp = <1012500>; flash-max-timeout-us = <1940000>; @@ -107,7 +109,7 @@ vdd3-supply = <&lcd_vdd3_reg>; vci-supply = <&ldo25_reg>; reset-gpios = <&gpf2 1 GPIO_ACTIVE_HIGH>; - power-on-delay= <50>; + power-on-delay = <50>; reset-delay = <100>; init-delay = <100>; flip-horizontal; diff --git a/dts/src/arm/exynos4412-itop-elite.dts b/dts/src/arm/exynos4412-itop-elite.dts index a9406280b9..202ab0fee3 100644 --- a/dts/src/arm/exynos4412-itop-elite.dts +++ b/dts/src/arm/exynos4412-itop-elite.dts @@ -11,6 +11,7 @@ */ /dts-v1/; +#include <dt-bindings/leds/common.h> #include <dt-bindings/pwm/pwm.h> #include <dt-bindings/sound/samsung-i2s.h> #include "exynos4412-itop-scp-core.dtsi" @@ -28,7 +29,8 @@ compatible = "gpio-leds"; led2 { - label = "red:system"; + function = LED_FUNCTION_HEARTBEAT; + color = <LED_COLOR_ID_RED>; gpios = <&gpx1 0 GPIO_ACTIVE_HIGH>; default-state = "off"; linux,default-trigger = "heartbeat"; @@ -36,6 +38,7 @@ led3 { label = "red:user"; + color = <LED_COLOR_ID_RED>; gpios = <&gpk1 1 GPIO_ACTIVE_HIGH>; default-state = "off"; }; @@ -44,31 +47,31 @@ gpio-keys { compatible = "gpio-keys"; - home { + key-home { label = "GPIO Key Home"; linux,code = <KEY_HOME>; gpios = <&gpx1 1 GPIO_ACTIVE_LOW>; }; - back { + key-back { label = "GPIO Key Back"; linux,code = <KEY_BACK>; gpios = <&gpx1 2 GPIO_ACTIVE_LOW>; }; - sleep { + key-sleep { label = "GPIO Key Sleep"; linux,code = <KEY_POWER>; gpios = <&gpx3 3 GPIO_ACTIVE_LOW>; }; - vol-up { + key-vol-up { label = "GPIO Key Vol+"; linux,code = <KEY_UP>; gpios = <&gpx2 1 GPIO_ACTIVE_LOW>; }; - vol-down { + key-vol-down { label = "GPIO Key Vol-"; linux,code = <KEY_DOWN>; gpios = <&gpx2 0 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/exynos4412-midas.dtsi b/dts/src/arm/exynos4412-midas.dtsi index 23f50c9be5..b967397a46 100644 --- a/dts/src/arm/exynos4412-midas.dtsi +++ b/dts/src/arm/exynos4412-midas.dtsi @@ -12,11 +12,12 @@ /dts-v1/; #include "exynos4412.dtsi" #include "exynos4412-ppmu-common.dtsi" + #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/clock/maxim,max77686.h> -#include <dt-bindings/pinctrl/samsung.h> +#include "exynos-pinctrl.h" / { compatible = "samsung,midas", "samsung,exynos4412", "samsung,exynos4"; diff --git a/dts/src/arm/exynos4412-odroidu3.dts b/dts/src/arm/exynos4412-odroidu3.dts index 36c369c42b..a5ad88b897 100644 --- a/dts/src/arm/exynos4412-odroidu3.dts +++ b/dts/src/arm/exynos4412-odroidu3.dts @@ -9,6 +9,7 @@ */ /dts-v1/; +#include <dt-bindings/leds/common.h> #include "exynos4412-odroid-common.dtsi" #include "exynos4412-prime.dtsi" @@ -37,7 +38,8 @@ leds { compatible = "gpio-leds"; led1 { - label = "led1:heart"; + function = LED_FUNCTION_HEARTBEAT; + color = <LED_COLOR_ID_BLUE>; gpios = <&gpc1 0 GPIO_ACTIVE_LOW>; default-state = "on"; linux,default-trigger = "heartbeat"; diff --git a/dts/src/arm/exynos4412-odroidx.dts b/dts/src/arm/exynos4412-odroidx.dts index 1f17cc30ed..68d589e081 100644 --- a/dts/src/arm/exynos4412-odroidx.dts +++ b/dts/src/arm/exynos4412-odroidx.dts @@ -9,6 +9,7 @@ */ /dts-v1/; +#include <dt-bindings/leds/common.h> #include "exynos4412-odroid-common.dtsi" / { @@ -27,13 +28,15 @@ leds { compatible = "gpio-leds"; led1 { - label = "led1:heart"; + function = LED_FUNCTION_HEARTBEAT; + color = <LED_COLOR_ID_BLUE>; gpios = <&gpc1 0 GPIO_ACTIVE_LOW>; default-state = "on"; linux,default-trigger = "heartbeat"; }; led2 { label = "led2:mmc0"; + function = LED_FUNCTION_DISK_ACTIVITY; gpios = <&gpc1 2 GPIO_ACTIVE_LOW>; default-state = "on"; linux,default-trigger = "mmc0"; diff --git a/dts/src/arm/exynos4412-p4note.dtsi b/dts/src/arm/exynos4412-p4note.dtsi index 97f131b101..7a515b87bc 100644 --- a/dts/src/arm/exynos4412-p4note.dtsi +++ b/dts/src/arm/exynos4412-p4note.dtsi @@ -15,8 +15,8 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/pinctrl/samsung.h> #include <dt-bindings/power/summit,smb347-charger.h> +#include "exynos-pinctrl.h" / { compatible = "samsung,p4note", "samsung,exynos4412", "samsung,exynos4"; @@ -106,6 +106,16 @@ regulator-always-on; }; + panel_vdd: voltage-regulator-4 { + compatible = "regulator-fixed"; + regulator-name = "LCD_ENABLE"; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_enable>; + gpios = <&gpc0 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; + wlan_pwrseq: sdhci3-pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&gpm3 5 GPIO_ACTIVE_LOW>; @@ -216,6 +226,32 @@ monitored-battery = <&battery_cell>; }; }; + + panel { + compatible = "samsung,ltl101al01"; + pinctrl-0 = <&lvds_nshdn>; + pinctrl-names = "default"; + power-supply = <&panel_vdd>; + enable-gpios = <&gpm0 5 GPIO_ACTIVE_HIGH>; + backlight = <&backlight>; + + port { + lcd_ep: endpoint { + remote-endpoint = <&fimd_ep>; + }; + }; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pinctrl-0 = <&led_bl_reset>; + pinctrl-names = "default"; + enable-gpios = <&gpm0 1 GPIO_ACTIVE_HIGH>; + pwms = <&pwm 1 78770 0>; + brightness-levels = <0 48 128 255>; + num-interpolated-steps = <8>; + default-brightness-level = <12>; + }; }; &adc { @@ -295,22 +331,19 @@ }; &fimd { - pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>; + pinctrl-0 = <&lcd_clk &lcd_data24>; pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; status = "okay"; - display-timings { - timing0 { - clock-frequency = <66666666>; - hactive = <1280>; - vactive = <800>; - hfront-porch = <18>; - hback-porch = <36>; - hsync-len = <16>; - vback-porch = <16>; - vfront-porch = <4>; - vsync-len = <3>; - hsync-active = <1>; + samsung,invert-vclk; + + port@3 { + reg = <3>; + + fimd_ep: endpoint { + remote-endpoint = <&lcd_ep>; }; }; }; @@ -687,6 +720,12 @@ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; }; + lcd_enable: lcd-enable-pins { + samsung,pins = "gpc0-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + sleep0: sleep-state { PIN_SLP(gpa0-0, INPUT, NONE); PIN_SLP(gpa0-1, OUT0, NONE); @@ -809,12 +848,24 @@ /* 0 = CP, 1 = AP (serial output) */ }; + led_bl_reset: led-bl-reset-pins { + samsung,pins = "gpm0-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + tsp_rst: tsp-rst-pins { samsung,pins = "gpm0-4"; samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; }; + lvds_nshdn: lvds-nshdn-pins { + samsung,pins = "gpm0-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + tsp_irq: tsp-irq-pins { samsung,pins = "gpm2-3"; samsung,pin-function = <EXYNOS_PIN_FUNC_F>; @@ -1100,6 +1151,13 @@ assigned-clock-parents = <&clock CLK_XUSBXTI>; }; +&pwm { + pinctrl-0 = <&pwm1_out>; + pinctrl-names = "default"; + samsung,pwm-outputs = <1>; + status = "okay"; +}; + &rtc { clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>; clock-names = "rtc", "rtc_src"; diff --git a/dts/src/arm/exynos4412-pinctrl.dtsi b/dts/src/arm/exynos4412-pinctrl.dtsi index 88b8afd556..58847d4fa8 100644 --- a/dts/src/arm/exynos4412-pinctrl.dtsi +++ b/dts/src/arm/exynos4412-pinctrl.dtsi @@ -9,7 +9,7 @@ * tree nodes are listed in this file. */ -#include <dt-bindings/pinctrl/samsung.h> +#include "exynos-pinctrl.h" #define PIN_SLP(_pin, _mode, _pull) \ _pin { \ diff --git a/dts/src/arm/exynos4412-tiny4412.dts b/dts/src/arm/exynos4412-tiny4412.dts index 017b26108b..04388c575e 100644 --- a/dts/src/arm/exynos4412-tiny4412.dts +++ b/dts/src/arm/exynos4412-tiny4412.dts @@ -11,6 +11,7 @@ /dts-v1/; #include "exynos4412.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> / { model = "FriendlyARM TINY4412 board based on Exynos4412"; @@ -30,6 +31,7 @@ led1 { label = "led1"; + function = LED_FUNCTION_HEARTBEAT; gpios = <&gpm4 0 GPIO_ACTIVE_LOW>; default-state = "off"; linux,default-trigger = "heartbeat"; @@ -49,6 +51,7 @@ led4 { label = "led4"; + function = LED_FUNCTION_DISK_ACTIVITY; gpios = <&gpm4 3 GPIO_ACTIVE_LOW>; default-state = "off"; linux,default-trigger = "mmc0"; diff --git a/dts/src/arm/exynos5.dtsi b/dts/src/arm/exynos5.dtsi index 9ce9fb3fc1..c8da0d4b1b 100644 --- a/dts/src/arm/exynos5.dtsi +++ b/dts/src/arm/exynos5.dtsi @@ -89,7 +89,7 @@ compatible = "arm,gic-400", "arm,cortex-a15-gic"; #interrupt-cells = <3>; interrupt-controller; - reg = <0x10481000 0x1000>, + reg = <0x10481000 0x1000>, <0x10482000 0x2000>, <0x10484000 0x2000>, <0x10486000 0x2000>; diff --git a/dts/src/arm/exynos5250-arndale.dts b/dts/src/arm/exynos5250-arndale.dts index f7795f2d0f..71c0e87d3a 100644 --- a/dts/src/arm/exynos5250-arndale.dts +++ b/dts/src/arm/exynos5250-arndale.dts @@ -30,42 +30,42 @@ gpio-keys { compatible = "gpio-keys"; - menu { + key-menu { label = "SW-TACT2"; gpios = <&gpx1 4 GPIO_ACTIVE_LOW>; linux,code = <KEY_MENU>; wakeup-source; }; - home { + key-home { label = "SW-TACT3"; gpios = <&gpx1 5 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOME>; wakeup-source; }; - up { + key-up { label = "SW-TACT4"; gpios = <&gpx1 6 GPIO_ACTIVE_LOW>; linux,code = <KEY_UP>; wakeup-source; }; - down { + key-down { label = "SW-TACT5"; gpios = <&gpx1 7 GPIO_ACTIVE_LOW>; linux,code = <KEY_DOWN>; wakeup-source; }; - back { + key-back { label = "SW-TACT6"; gpios = <&gpx2 0 GPIO_ACTIVE_LOW>; linux,code = <KEY_BACK>; wakeup-source; }; - wakeup { + key-wakeup { label = "SW-TACT7"; gpios = <&gpx2 1 GPIO_ACTIVE_LOW>; linux,code = <KEY_WAKEUP>; diff --git a/dts/src/arm/exynos5250-pinctrl.dtsi b/dts/src/arm/exynos5250-pinctrl.dtsi index 918947a389..48732edadf 100644 --- a/dts/src/arm/exynos5250-pinctrl.dtsi +++ b/dts/src/arm/exynos5250-pinctrl.dtsi @@ -9,7 +9,7 @@ * tree nodes are listed in this file. */ -#include <dt-bindings/pinctrl/samsung.h> +#include "exynos-pinctrl.h" &pinctrl_0 { gpa0: gpa0-gpio-bank { diff --git a/dts/src/arm/exynos5250-snow-common.dtsi b/dts/src/arm/exynos5250-snow-common.dtsi index c15ecfc407..3d84b9c6de 100644 --- a/dts/src/arm/exynos5250-snow-common.dtsi +++ b/dts/src/arm/exynos5250-snow-common.dtsi @@ -32,7 +32,7 @@ pinctrl-names = "default"; pinctrl-0 = <&power_key_irq &lid_irq>; - power { + power-key { label = "Power"; gpios = <&gpx1 3 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; diff --git a/dts/src/arm/exynos5250-spring.dts b/dts/src/arm/exynos5250-spring.dts index 24609bb201..5eca10ecd5 100644 --- a/dts/src/arm/exynos5250-spring.dts +++ b/dts/src/arm/exynos5250-spring.dts @@ -33,7 +33,7 @@ pinctrl-names = "default"; pinctrl-0 = <&power_key_irq>, <&lid_irq>; - power { + power-key { label = "Power"; gpios = <&gpx1 3 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; diff --git a/dts/src/arm/exynos5260-pinctrl.dtsi b/dts/src/arm/exynos5260-pinctrl.dtsi index 150607f810..43e4a541f4 100644 --- a/dts/src/arm/exynos5260-pinctrl.dtsi +++ b/dts/src/arm/exynos5260-pinctrl.dtsi @@ -9,7 +9,7 @@ * tree nodes are listed in this file. */ -#include <dt-bindings/pinctrl/samsung.h> +#include "exynos-pinctrl.h" &pinctrl_0 { gpa0: gpa0-gpio-bank { diff --git a/dts/src/arm/exynos5410-pinctrl.dtsi b/dts/src/arm/exynos5410-pinctrl.dtsi index 6c7814b437..f7b9233828 100644 --- a/dts/src/arm/exynos5410-pinctrl.dtsi +++ b/dts/src/arm/exynos5410-pinctrl.dtsi @@ -6,7 +6,7 @@ * https://www.hardkernel.com */ -#include <dt-bindings/pinctrl/samsung.h> +#include "exynos-pinctrl.h" &pinctrl_0 { gpa0: gpa0-gpio-bank { diff --git a/dts/src/arm/exynos5420-arndale-octa.dts b/dts/src/arm/exynos5420-arndale-octa.dts index 946b791faf..55b7759682 100644 --- a/dts/src/arm/exynos5420-arndale-octa.dts +++ b/dts/src/arm/exynos5420-arndale-octa.dts @@ -42,7 +42,7 @@ gpio-keys { compatible = "gpio-keys"; - wakeup { + key-wakeup { label = "SW-TACT1"; gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; linux,code = <KEY_WAKEUP>; diff --git a/dts/src/arm/exynos5420-peach-pit.dts b/dts/src/arm/exynos5420-peach-pit.dts index d6434ec860..9e2123470c 100644 --- a/dts/src/arm/exynos5420-peach-pit.dts +++ b/dts/src/arm/exynos5420-peach-pit.dts @@ -60,7 +60,7 @@ pinctrl-names = "default"; pinctrl-0 = <&power_key_irq &lid_irq>; - power { + power-key { label = "Power"; gpios = <&gpx1 2 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; diff --git a/dts/src/arm/exynos5420-pinctrl.dtsi b/dts/src/arm/exynos5420-pinctrl.dtsi index 546ba274f4..14cf9c4ca0 100644 --- a/dts/src/arm/exynos5420-pinctrl.dtsi +++ b/dts/src/arm/exynos5420-pinctrl.dtsi @@ -9,7 +9,7 @@ * tree nodes are listed in this file. */ -#include <dt-bindings/pinctrl/samsung.h> +#include "exynos-pinctrl.h" &pinctrl_0 { gpy7: gpy7-gpio-bank { diff --git a/dts/src/arm/exynos5422-odroidhc1.dts b/dts/src/arm/exynos5422-odroidhc1.dts index d91f7fa2cf..3de7019572 100644 --- a/dts/src/arm/exynos5422-odroidhc1.dts +++ b/dts/src/arm/exynos5422-odroidhc1.dts @@ -8,6 +8,7 @@ */ /dts-v1/; +#include <dt-bindings/leds/common.h> #include "exynos5422-odroid-core.dtsi" / { @@ -19,7 +20,8 @@ compatible = "pwm-leds"; led-1 { - label = "blue:heartbeat"; + function = LED_FUNCTION_HEARTBEAT; + color = <LED_COLOR_ID_BLUE>; pwms = <&pwm 2 2000000 0>; pwm-names = "pwm2"; max-brightness = <255>; diff --git a/dts/src/arm/exynos5422-odroidxu4.dts b/dts/src/arm/exynos5422-odroidxu4.dts index 1c24f9b359..f5fb617f46 100644 --- a/dts/src/arm/exynos5422-odroidxu4.dts +++ b/dts/src/arm/exynos5422-odroidxu4.dts @@ -9,6 +9,7 @@ */ /dts-v1/; +#include <dt-bindings/leds/common.h> #include <dt-bindings/sound/samsung-i2s.h> #include "exynos5422-odroidxu3-common.dtsi" @@ -21,7 +22,8 @@ compatible = "pwm-leds"; led-1 { - label = "blue:heartbeat"; + function = LED_FUNCTION_HEARTBEAT; + color = <LED_COLOR_ID_BLUE>; pwms = <&pwm 2 2000000 0>; pwm-names = "pwm2"; max-brightness = <255>; diff --git a/dts/src/arm/exynos54xx-odroidxu-leds.dtsi b/dts/src/arm/exynos54xx-odroidxu-leds.dtsi index 982752e1df..8c0e1716c0 100644 --- a/dts/src/arm/exynos54xx-odroidxu-leds.dtsi +++ b/dts/src/arm/exynos54xx-odroidxu-leds.dtsi @@ -9,6 +9,7 @@ */ #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> / { led-controller-1 { @@ -16,6 +17,8 @@ led-1 { label = "green:mmc0"; + function = LED_FUNCTION_DISK_ACTIVITY; + color = <LED_COLOR_ID_GREEN>; pwms = <&pwm 1 2000000 0>; pwm-names = "pwm1"; /* @@ -27,7 +30,8 @@ }; led-2 { - label = "blue:heartbeat"; + function = LED_FUNCTION_HEARTBEAT; + color = <LED_COLOR_ID_BLUE>; pwms = <&pwm 2 2000000 0>; pwm-names = "pwm2"; max-brightness = <255>; @@ -40,6 +44,8 @@ led-3 { label = "red:microSD"; + function = LED_FUNCTION_DISK_ACTIVITY; + color = <LED_COLOR_ID_RED>; gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>; default-state = "off"; linux,default-trigger = "mmc1"; diff --git a/dts/src/arm/exynos5800-peach-pi.dts b/dts/src/arm/exynos5800-peach-pi.dts index 4ee7628197..0ebcb66c63 100644 --- a/dts/src/arm/exynos5800-peach-pi.dts +++ b/dts/src/arm/exynos5800-peach-pi.dts @@ -59,7 +59,7 @@ pinctrl-names = "default"; pinctrl-0 = <&power_key_irq &lid_irq>; - power { + power-key { label = "Power"; gpios = <&gpx1 2 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; diff --git a/dts/src/arm/imx23-pinfunc.h b/dts/src/arm/imx23-pinfunc.h index 5c0f32ca3a..468c079f3c 100644 --- a/dts/src/arm/imx23-pinfunc.h +++ b/dts/src/arm/imx23-pinfunc.h @@ -1,14 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Header providing constants for i.MX23 pinctrl bindings. * * Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #ifndef __DT_BINDINGS_MX23_PINCTRL_H__ diff --git a/dts/src/arm/imx25.dtsi b/dts/src/arm/imx25.dtsi index fa8044c21c..bc4de0c055 100644 --- a/dts/src/arm/imx25.dtsi +++ b/dts/src/arm/imx25.dtsi @@ -68,7 +68,7 @@ }; }; - soc { + soc: soc { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; diff --git a/dts/src/arm/imx27.dtsi b/dts/src/arm/imx27.dtsi index b660c7d055..e140307be2 100644 --- a/dts/src/arm/imx27.dtsi +++ b/dts/src/arm/imx27.dtsi @@ -74,14 +74,14 @@ }; }; - soc { + soc: soc { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; interrupt-parent = <&aitc>; ranges; - aipi@10000000 { /* AIPI1 */ + aipi1: aipi@10000000 { /* AIPI1 */ compatible = "fsl,aipi-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -453,7 +453,7 @@ }; }; - aipi@10020000 { /* AIPI2 */ + aipi2: aipi@10020000 { /* AIPI2 */ compatible = "fsl,aipi-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/dts/src/arm/imx28-pinfunc.h b/dts/src/arm/imx28-pinfunc.h index e11f69ba0f..d427e6c2fa 100644 --- a/dts/src/arm/imx28-pinfunc.h +++ b/dts/src/arm/imx28-pinfunc.h @@ -1,14 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Header providing constants for i.MX28 pinctrl bindings. * * Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #ifndef __DT_BINDINGS_MX28_PINCTRL_H__ diff --git a/dts/src/arm/imx31.dtsi b/dts/src/arm/imx31.dtsi index 2adb923c0b..5c4938b0d5 100644 --- a/dts/src/arm/imx31.dtsi +++ b/dts/src/arm/imx31.dtsi @@ -48,7 +48,7 @@ reg = <0x68000000 0x100000>; }; - soc { + soc: soc { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; @@ -63,7 +63,7 @@ ranges = <0 0x1fffc000 0x4000>; }; - bus@43f00000 { /* AIPS1 */ + aips1: bus@43f00000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/dts/src/arm/imx50.dtsi b/dts/src/arm/imx50.dtsi index be0de0fd31..c0c7575fbe 100644 --- a/dts/src/arm/imx50.dtsi +++ b/dts/src/arm/imx50.dtsi @@ -94,14 +94,14 @@ status = "okay"; }; - soc { + soc: soc { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; interrupt-parent = <&tzic>; ranges; - bus@50000000 { /* AIPS1 */ + aips1: bus@50000000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -385,7 +385,7 @@ }; }; - bus@60000000 { /* AIPS2 */ + aips2: bus@60000000 { /* AIPS2 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/dts/src/arm/imx51-ts4800.dts b/dts/src/arm/imx51-ts4800.dts index 85654d6baf..f7408722d6 100644 --- a/dts/src/arm/imx51-ts4800.dts +++ b/dts/src/arm/imx51-ts4800.dts @@ -174,7 +174,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_interrupt_fpga>; interrupt-parent = <&gpio2>; - interrupts= <9 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <1>; }; diff --git a/dts/src/arm/imx51.dtsi b/dts/src/arm/imx51.dtsi index 1e20a6639e..592d9c23a4 100644 --- a/dts/src/arm/imx51.dtsi +++ b/dts/src/arm/imx51.dtsi @@ -114,7 +114,7 @@ ports = <&ipu_di0>, <&ipu_di1>; }; - soc { + soc: soc { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; @@ -171,7 +171,7 @@ }; }; - bus@70000000 { /* AIPS1 */ + aips1: bus@70000000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -460,7 +460,7 @@ }; }; - bus@80000000 { /* AIPS2 */ + aips2: bus@80000000 { /* AIPS2 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/dts/src/arm/imx53.dtsi b/dts/src/arm/imx53.dtsi index 67487f3cae..b7a6469d34 100644 --- a/dts/src/arm/imx53.dtsi +++ b/dts/src/arm/imx53.dtsi @@ -132,7 +132,7 @@ status = "okay"; }; - soc { + soc: soc { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; @@ -222,7 +222,7 @@ clock-names = "core_clk", "mem_iface_clk"; }; - bus@50000000 { /* AIPS1 */ + aips1: bus@50000000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -655,7 +655,7 @@ }; }; - bus@60000000 { /* AIPS2 */ + aips2: bus@60000000 { /* AIPS2 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/dts/src/arm/imx6dl-plym2m.dts b/dts/src/arm/imx6dl-plym2m.dts index c4ce23d8ac..522660c912 100644 --- a/dts/src/arm/imx6dl-plym2m.dts +++ b/dts/src/arm/imx6dl-plym2m.dts @@ -196,7 +196,7 @@ compatible = "ti,tsc2046e-adc"; reg = <0>; pinctrl-0 = <&pinctrl_tsc2046>; - pinctrl-names ="default"; + pinctrl-names = "default"; spi-max-frequency = <1000000>; interrupts-extended = <&gpio3 20 IRQ_TYPE_LEVEL_LOW>; #io-channel-cells = <1>; diff --git a/dts/src/arm/imx6dl-prtvt7.dts b/dts/src/arm/imx6dl-prtvt7.dts index b86deebef7..0a0b7acddf 100644 --- a/dts/src/arm/imx6dl-prtvt7.dts +++ b/dts/src/arm/imx6dl-prtvt7.dts @@ -344,7 +344,7 @@ compatible = "ti,tsc2046e-adc"; reg = <0>; pinctrl-0 = <&pinctrl_tsc>; - pinctrl-names ="default"; + pinctrl-names = "default"; spi-max-frequency = <1000000>; interrupts-extended = <&gpio3 20 IRQ_TYPE_LEVEL_LOW>; #io-channel-cells = <1>; diff --git a/dts/src/arm/imx6dl-victgo.dts b/dts/src/arm/imx6dl-victgo.dts index 516ec915a9..779b52858a 100644 --- a/dts/src/arm/imx6dl-victgo.dts +++ b/dts/src/arm/imx6dl-victgo.dts @@ -144,7 +144,7 @@ compatible = "ti,tsc2046e-adc"; reg = <0>; pinctrl-0 = <&pinctrl_touchscreen>; - pinctrl-names ="default"; + pinctrl-names = "default"; spi-max-frequency = <1000000>; interrupts-extended = <&gpio5 8 IRQ_TYPE_LEVEL_LOW>; #io-channel-cells = <1>; diff --git a/dts/src/arm/imx6dl.dtsi b/dts/src/arm/imx6dl.dtsi index fdd81fdc3f..8e0ed209ed 100644 --- a/dts/src/arm/imx6dl.dtsi +++ b/dts/src/arm/imx6dl.dtsi @@ -80,7 +80,7 @@ }; }; - soc { + soc: soc { ocram: sram@900000 { compatible = "mmio-sram"; reg = <0x00900000 0x20000>; diff --git a/dts/src/arm/imx6q-apalis-eval.dts b/dts/src/arm/imx6q-apalis-eval.dts index a0683b4aec..fa160a3898 100644 --- a/dts/src/arm/imx6q-apalis-eval.dts +++ b/dts/src/arm/imx6q-apalis-eval.dts @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2014-2020 Toradex + * Copyright 2014-2022 Toradex * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. */ @@ -30,89 +30,26 @@ stdout-path = "serial0:115200n8"; }; - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio_keys>; - - wakeup { - label = "Wake-Up"; - gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WAKEUP>; - debounce-interval = <10>; - wakeup-source; - }; - }; - - lcd_display: disp0 { - compatible = "fsl,imx-parallel-display"; - #address-cells = <1>; - #size-cells = <0>; - interface-pix-fmt = "rgb24"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ipu1_lcdif>; - status = "okay"; - - port@0 { - reg = <0>; - - lcd_display_in: endpoint { - remote-endpoint = <&ipu1_di1_disp1>; - }; - }; - - port@1 { - reg = <1>; - - lcd_display_out: endpoint { - remote-endpoint = <&lcd_panel_in>; - }; - }; - }; - - panel: panel { - /* - * edt,et057090dhu: EDT 5.7" LCD TFT - * edt,et070080dh6: EDT 7.0" LCD TFT - */ - compatible = "edt,et057090dhu"; - backlight = <&backlight>; - power-supply = <®_3v3_sw>; - - port { - lcd_panel_in: endpoint { - remote-endpoint = <&lcd_display_out>; - }; - }; - }; - reg_pcie_switch: regulator-pcie-switch { compatible = "regulator-fixed"; - regulator-name = "pcie_switch"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + enable-active-high; gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "pcie_switch"; startup-delay-us = <100000>; - enable-active-high; status = "okay"; }; reg_3v3_sw: regulator-3v3-sw { compatible = "regulator-fixed"; - regulator-name = "3.3V_SW"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; regulator-always-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "3.3V_SW"; }; }; -&backlight { - brightness-levels = <0 127 191 223 239 247 251 255>; - default-brightness-level = <1>; - power-supply = <®_3v3_sw>; - status = "okay"; -}; - &can1 { xceiver-supply = <®_3v3_sw>; status = "okay"; @@ -123,27 +60,10 @@ status = "okay"; }; -&hdmi { - status = "okay"; -}; - /* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */ &i2c1 { status = "okay"; - /* - * Touchscreen is using SODIMM 28/30, also used for PWM<B>, PWM<C>, - * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms - */ - touchscreen@4a { - compatible = "atmel,maxtouch"; - reg = <0x4a>; - interrupt-parent = <&gpio6>; - interrupts = <10 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>; /* SODIMM 13 */ - status = "disabled"; - }; - pcie-switch@58 { compatible = "plx,pex8605"; reg = <0x58>; @@ -164,14 +84,6 @@ status = "okay"; }; -&ipu1_di1_disp1 { - remote-endpoint = <&lcd_display_in>; -}; - -&ldb { - status = "okay"; -}; - &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_reset_moci>; @@ -198,11 +110,11 @@ status = "okay"; }; -®_usb_otg_vbus { +®_usb_host_vbus { status = "okay"; }; -®_usb_host_vbus { +®_usb_otg_vbus { status = "okay"; }; @@ -246,28 +158,13 @@ /* MMC1 */ &usdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_usdhc1_8bit &pinctrl_mmc_cd>; - cd-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>; status = "okay"; }; /* SD1 */ &usdhc2 { + cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_sd_cd>; - cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; status = "okay"; }; - -&iomuxc { - /* - * Mux the Apalis GPIOs - */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2 - &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4 - &pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6 - &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8 - >; -}; diff --git a/dts/src/arm/imx6q-apalis-ixora-v1.1.dts b/dts/src/arm/imx6q-apalis-ixora-v1.1.dts index 86e84781cf..44637d606e 100644 --- a/dts/src/arm/imx6q-apalis-ixora-v1.1.dts +++ b/dts/src/arm/imx6q-apalis-ixora-v1.1.dts @@ -1,274 +1,37 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2014-2020 Toradex + * Copyright 2014-2022 Toradex * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. */ -/dts-v1/; - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/interrupt-controller/irq.h> -#include "imx6q.dtsi" -#include "imx6qdl-apalis.dtsi" +#include "imx6q-apalis-ixora-v1.2.dts" / { model = "Toradex Apalis iMX6Q/D Module on Ixora Carrier Board V1.1"; - compatible = "toradex,apalis_imx6q-ixora-v1.1", - "toradex,apalis_imx6q-ixora", "toradex,apalis_imx6q", + compatible = "toradex,apalis_imx6q-ixora-v1.1", "toradex,apalis_imx6q", "fsl,imx6q"; - aliases { - i2c0 = &i2c1; - i2c1 = &i2c3; - i2c2 = &i2c2; - rtc0 = &rtc_i2c; - rtc1 = &snvs_rtc; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio_keys>; - - wakeup { - label = "Wake-Up"; - gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WAKEUP>; - debounce-interval = <10>; - wakeup-source; - }; - }; - - lcd_display: disp0 { - compatible = "fsl,imx-parallel-display"; - #address-cells = <1>; - #size-cells = <0>; - interface-pix-fmt = "rgb24"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ipu1_lcdif>; - status = "okay"; - - port@0 { - reg = <0>; - - lcd_display_in: endpoint { - remote-endpoint = <&ipu1_di1_disp1>; - }; - }; - - port@1 { - reg = <1>; - - lcd_display_out: endpoint { - remote-endpoint = <&lcd_panel_in>; - }; - }; - }; - panel: panel { - /* - * edt,et057090dhu: EDT 5.7" LCD TFT - * edt,et070080dh6: EDT 7.0" LCD TFT - */ - compatible = "edt,et057090dhu"; - backlight = <&backlight>; - - port { - lcd_panel_in: endpoint { - remote-endpoint = <&lcd_display_out>; - }; - }; - }; - - leds { - compatible = "gpio-leds"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_leds_ixora>; - - led4-green { - label = "LED_4_GREEN"; - gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; - }; - - led4-red { - label = "LED_4_RED"; - gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; - }; - - led5-green { - label = "LED_5_GREEN"; - gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; - }; - - led5-red { - label = "LED_5_RED"; - gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; - }; - }; }; -&backlight { - brightness-levels = <0 127 191 223 239 247 251 255>; - default-brightness-level = <1>; - status = "okay"; -}; +/delete-node/ &eeprom; +/delete-node/ ®_3v3_vmmc; +/delete-node/ ®_can1_supply; +/delete-node/ ®_can2_supply; &can1 { - status = "okay"; + /delete-property/ xceiver-supply; }; &can2 { - status = "okay"; -}; - -&hdmi { - status = "okay"; -}; - -/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */ -&i2c1 { - status = "okay"; - - /* - * Touchscreen is using SODIMM 28/30, also used for PWM<B>, PWM<C>, - * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms - */ - touchscreen@4a { - compatible = "atmel,maxtouch"; - reg = <0x4a>; - interrupt-parent = <&gpio6>; - interrupts = <10 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>; /* SODIMM 13 */ - status = "disabled"; - }; - - /* M41T0M6 real time clock on carrier board */ - rtc_i2c: rtc@68 { - compatible = "st,m41t0"; - reg = <0x68>; - }; -}; - -/* - * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier - * board) - */ -&i2c3 { - status = "okay"; -}; - -&ipu1_di1_disp1 { - remote-endpoint = <&lcd_display_in>; -}; - -&ldb { - status = "okay"; -}; - -&pcie { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_reset_moci>; - /* active-high meaning opposite of regular PERST# active-low polarity */ - reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; - reset-gpio-active-high; - status = "okay"; -}; - -&pwm1 { - status = "okay"; -}; - -&pwm2 { - status = "okay"; -}; - -&pwm3 { - status = "okay"; -}; - -&pwm4 { - status = "okay"; -}; - -®_usb_otg_vbus { - status = "okay"; -}; - -®_usb_host_vbus { - status = "okay"; -}; - -&sata { - status = "okay"; -}; - -&sound_spdif { - status = "okay"; -}; - -&spdif { - status = "okay"; -}; - -&uart1 { - status = "okay"; -}; - -&uart2 { - status = "okay"; -}; - -&uart4 { - status = "okay"; -}; - -&uart5 { - status = "okay"; -}; - -&usbh1 { - vbus-supply = <®_usb_host_vbus>; - status = "okay"; -}; - -&usbotg { - vbus-supply = <®_usb_otg_vbus>; - status = "okay"; + /delete-property/ xceiver-supply; }; /* MMC1 */ &usdhc1 { + /delete-property/ cap-power-off-card; + /delete-property/ pinctrl-1; + /delete-property/ vmmc-supply; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_mmc_cd>; - cd-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>; - bus-width = <4>; - status = "okay"; -}; - -&iomuxc { - /* - * Mux the Apalis GPIOs - */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2 - &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4 - &pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6 - &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8 - >; - - pinctrl_leds_ixora: ledsixoragrp { - fsl,pins = < - MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x1b0b0 - MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x1b0b0 - MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 - MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 - >; - }; }; diff --git a/dts/src/arm/imx6q-apalis-ixora-v1.2.dts b/dts/src/arm/imx6q-apalis-ixora-v1.2.dts new file mode 100644 index 0000000000..f9f7d99bd4 --- /dev/null +++ b/dts/src/arm/imx6q-apalis-ixora-v1.2.dts @@ -0,0 +1,276 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2014-2022 Toradex + * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "imx6q.dtsi" +#include "imx6qdl-apalis.dtsi" + +/ { + model = "Toradex Apalis iMX6Q/D Module on Ixora Carrier Board V1.2"; + compatible = "toradex,apalis_imx6q-ixora-v1.2", "toradex,apalis_imx6q", + "fsl,imx6q"; + + aliases { + i2c0 = &i2c1; + i2c1 = &i2c3; + i2c2 = &i2c2; + rtc0 = &rtc_i2c; + rtc1 = &snvs_rtc; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds_ixora>; + + led4-green { + gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; + label = "LED_4_GREEN"; + }; + + led4-red { + gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; + label = "LED_4_RED"; + }; + + led5-green { + gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; + label = "LED_5_GREEN"; + }; + + led5-red { + gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; + label = "LED_5_RED"; + }; + }; + + reg_3v3_vmmc: regulator-3v3-vmmc { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enable_3v3_vmmc>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "3v3_vmmc"; + startup-delay-us = <100>; + }; + + reg_can1_supply: regulator-can1-supply { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enable_can1_power>; + regulator-name = "can1_supply"; + }; + + reg_can2_supply: regulator-can2-supply { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enable_can2_power>; + regulator-name = "can2_supply"; + }; +}; + +&can1 { + xceiver-supply = <®_can1_supply>; + status = "okay"; +}; + +&can2 { + xceiver-supply = <®_can2_supply>; + status = "okay"; +}; + +&gpio1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart24_forceoff>; + + /* + * uart-2-4-on-x21-enable-hog enables the UART transceiver for Apalis + * UART2 and UART3. If one wants to disable the transceiver force + * the GPIO to output-low, if one wants to control the transceiver + * from user space delete the hog node. + */ + uart-2-4-on-x21-enable-hog { + gpio-hog; + gpios = <11 GPIO_ACTIVE_HIGH>; /* MXM3 180 */ + output-high; + }; +}; + +/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */ +&i2c1 { + status = "okay"; + + /* M41T0M6 real time clock on carrier board */ + rtc_i2c: rtc@68 { + compatible = "st,m41t0"; + reg = <0x68>; + }; + + eeprom: eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; +}; + +/* + * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier + * board) + */ +&i2c3 { + status = "okay"; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reset_moci>; + /* active-high meaning opposite of regular PERST# active-low polarity */ + reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; + reset-gpio-active-high; + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&pwm3 { + status = "okay"; +}; + +&pwm4 { + status = "okay"; +}; + +®_usb_host_vbus { + status = "okay"; +}; + +®_usb_otg_vbus { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&sound_spdif { + status = "okay"; +}; + +&spdif { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_host_vbus>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + status = "okay"; +}; + +/* MMC1 */ +&usdhc1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_mmc_cd>; + pinctrl-1 = <&pinctrl_usdhc1_4bit_sleep &pinctrl_mmc_cd_sleep>; + bus-width = <4>; + cap-power-off-card; + vmmc-supply = <®_3v3_vmmc>; + status = "okay"; +}; + +&iomuxc { + pinctrl_enable_3v3_vmmc: enable3v3vmmcgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 + >; + }; + + pinctrl_enable_can1_power: enablecan1powergrp { + fsl,pins = < + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 + >; + }; + + pinctrl_enable_can2_power: enablecan2powergrp { + fsl,pins = < + MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x1b0b0 + >; + }; + + pinctrl_uart24_forceoff: uart24forceoffgrp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x1b0b0 + >; + }; + + pinctrl_leds_ixora: ledsixoragrp { + fsl,pins = < + MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x1b0b0 + MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x1b0b0 + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 + >; + }; + + pinctrl_mmc_cd_sleep: mmccdslpgrp { + fsl,pins = < + /* MMC1 CD */ + MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x0 + >; + }; + + pinctrl_usdhc1_4bit_sleep: usdhc1-4bitslpgrp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x3000 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x3000 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x3000 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x3000 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x3000 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x3000 + >; + }; +}; diff --git a/dts/src/arm/imx6q-apalis-ixora.dts b/dts/src/arm/imx6q-apalis-ixora.dts index 62e72773e5..ce39c6a3f6 100644 --- a/dts/src/arm/imx6q-apalis-ixora.dts +++ b/dts/src/arm/imx6q-apalis-ixora.dts @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2014-2020 Toradex + * Copyright 2014-2022 Toradex * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. */ @@ -30,95 +30,33 @@ stdout-path = "serial0:115200n8"; }; - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio_keys>; - - wakeup { - label = "Wake-Up"; - gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WAKEUP>; - debounce-interval = <10>; - wakeup-source; - }; - }; - - lcd_display: disp0 { - compatible = "fsl,imx-parallel-display"; - #address-cells = <1>; - #size-cells = <0>; - interface-pix-fmt = "rgb24"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ipu1_lcdif>; - status = "okay"; - - port@0 { - reg = <0>; - - lcd_display_in: endpoint { - remote-endpoint = <&ipu1_di1_disp1>; - }; - }; - - port@1 { - reg = <1>; - - lcd_display_out: endpoint { - remote-endpoint = <&lcd_panel_in>; - }; - }; - }; - - panel: panel { - /* - * edt,et057090dhu: EDT 5.7" LCD TFT - * edt,et070080dh6: EDT 7.0" LCD TFT - */ - compatible = "edt,et057090dhu"; - backlight = <&backlight>; - - port { - lcd_panel_in: endpoint { - remote-endpoint = <&lcd_display_out>; - }; - }; - }; - leds { compatible = "gpio-leds"; - pinctrl-names = "default"; pinctrl-0 = <&pinctrl_leds_ixora>; led4-green { - label = "LED_4_GREEN"; gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; + label = "LED_4_GREEN"; }; led4-red { - label = "LED_4_RED"; gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; + label = "LED_4_RED"; }; led5-green { - label = "LED_5_GREEN"; gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; + label = "LED_5_GREEN"; }; led5-red { - label = "LED_5_RED"; gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; + label = "LED_5_RED"; }; }; }; -&backlight { - brightness-levels = <0 127 191 223 239 247 251 255>; - default-brightness-level = <1>; - status = "okay"; -}; - &can1 { status = "okay"; }; @@ -127,27 +65,10 @@ status = "okay"; }; -&hdmi { - status = "okay"; -}; - /* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */ &i2c1 { status = "okay"; - /* - * Touchscreen is using SODIMM 28/30, also used for PWM<B>, PWM<C>, - * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms - */ - touchscreen@4a { - compatible = "atmel,maxtouch"; - reg = <0x4a>; - interrupt-parent = <&gpio6>; - interrupts = <10 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>; /* SODIMM 13 */ - status = "disabled"; - }; - eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>; @@ -168,14 +89,6 @@ status = "okay"; }; -&ipu1_di1_disp1 { - remote-endpoint = <&lcd_display_in>; -}; - -&ldb { - status = "okay"; -}; - &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_reset_moci>; @@ -201,11 +114,11 @@ status = "okay"; }; -®_usb_otg_vbus { +®_usb_host_vbus { status = "okay"; }; -®_usb_host_vbus { +®_usb_otg_vbus { status = "okay"; }; @@ -249,21 +162,13 @@ /* SD1 */ &usdhc2 { + cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_sd_cd>; - cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; status = "okay"; }; &iomuxc { - /* Mux the Apalis GPIOs */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2 - &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4 - &pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6 - &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8 - >; - pinctrl_leds_ixora: ledsixoragrp { fsl,pins = < MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0 diff --git a/dts/src/arm/imx6q-bosch-acc.dts b/dts/src/arm/imx6q-bosch-acc.dts index 8768222e18..8263bfef9b 100644 --- a/dts/src/arm/imx6q-bosch-acc.dts +++ b/dts/src/arm/imx6q-bosch-acc.dts @@ -570,7 +570,7 @@ cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; no-1-8-v; keep-power-in-suspend; - enable-sdio-wakeup; + wakeup-source; voltage-ranges = <3300 3300>; vmmc-supply = <®_sw4>; fsl,wp-controller; @@ -594,7 +594,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_wdog1>; fsl,ext-reset-output; - timeout-sec=<10>; + timeout-sec = <10>; status = "okay"; }; diff --git a/dts/src/arm/imx6q-gk802.dts b/dts/src/arm/imx6q-gk802.dts index ccc2487d47..2fda68f9d3 100644 --- a/dts/src/arm/imx6q-gk802.dts +++ b/dts/src/arm/imx6q-gk802.dts @@ -1,10 +1,5 @@ -/* - * Copyright (C) 2013 Philipp Zabel - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright (C) 2013 Philipp Zabel /dts-v1/; #include <dt-bindings/gpio/gpio.h> diff --git a/dts/src/arm/imx6q-skov-reve-mi1010ait-1cp1.dts b/dts/src/arm/imx6q-skov-reve-mi1010ait-1cp1.dts index 7f1f19b74b..a3f247c722 100644 --- a/dts/src/arm/imx6q-skov-reve-mi1010ait-1cp1.dts +++ b/dts/src/arm/imx6q-skov-reve-mi1010ait-1cp1.dts @@ -125,3 +125,9 @@ >; }; }; + +®_tft_vcom { + regulator-min-microvolt = <3160000>; + regulator-max-microvolt = <3160000>; + voltage-table = <3160000 73>; +}; diff --git a/dts/src/arm/imx6q.dtsi b/dts/src/arm/imx6q.dtsi index 9caba4529c..3b77eae40e 100644 --- a/dts/src/arm/imx6q.dtsi +++ b/dts/src/arm/imx6q.dtsi @@ -159,14 +159,14 @@ }; }; - soc { + soc: soc { ocram: sram@900000 { compatible = "mmio-sram"; reg = <0x00900000 0x40000>; clocks = <&clks IMX6QDL_CLK_OCRAM>; }; - bus@2000000 { /* AIPS1 */ + aips1: bus@2000000 { /* AIPS1 */ spba-bus@2000000 { ecspi5: spi@2018000 { #address-cells = <1>; diff --git a/dts/src/arm/imx6qdl-apalis.dtsi b/dts/src/arm/imx6qdl-apalis.dtsi index bd763bae59..7c17b91f09 100644 --- a/dts/src/arm/imx6qdl-apalis.dtsi +++ b/dts/src/arm/imx6qdl-apalis.dtsi @@ -1,11 +1,12 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2014-2020 Toradex + * Copyright 2014-2022 Toradex * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. */ #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pwm/pwm.h> / { model = "Toradex Apalis iMX6Q/D Module"; @@ -19,88 +20,182 @@ backlight: backlight { compatible = "pwm-backlight"; + brightness-levels = <0 45 63 88 119 158 203 255>; + default-brightness-level = <4>; + enable-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_bl_on>; - pwms = <&pwm4 0 5000000>; - enable-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; + power-supply = <®_module_3v3>; + pwms = <&pwm4 0 5000000 PWM_POLARITY_INVERTED>; + status = "disabled"; + }; + + clk_ov5640_osc: clk-ov5640-osc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + wakeup { + debounce-interval = <10>; + gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + label = "Wake-Up"; + linux,code = <KEY_WAKEUP>; + wakeup-source; + }; + }; + + lcd_display: disp0 { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_lcdif>; status = "disabled"; + + port@0 { + reg = <0>; + + lcd_display_in: endpoint { + remote-endpoint = <&ipu1_di1_disp1>; + }; + }; + + port@1 { + reg = <1>; + + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + }; + + panel_dpi: panel-dpi { + compatible = "edt,et057090dhu"; + backlight = <&backlight>; + + status = "disabled"; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; + + panel_lvds: panel-lvds { + compatible = "panel-lvds"; + backlight = <&backlight>; + status = "disabled"; + + port { + lvds_panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; }; reg_module_3v3: regulator-module-3v3 { compatible = "regulator-fixed"; - regulator-name = "+V3.3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; regulator-always-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "+V3.3"; }; reg_module_3v3_audio: regulator-module-3v3-audio { compatible = "regulator-fixed"; - regulator-name = "+V3.3_AUDIO"; - regulator-min-microvolt = <3300000>; + regulator-always-on; regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "+V3.3_AUDIO"; + }; + + reg_ov5640_1v8_d_o_vdd: regulator-ov5640-1v8-d-o-vdd { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "DOVDD/DVDD_1.8V"; + /* Note: The CSI module uses on-board 3.3V_SW supply */ + vin-supply = <®_module_3v3>; + }; + + reg_ov5640_2v8_a_vdd: regulator-ov5640-2v8-a-vdd { + compatible = "regulator-fixed"; regulator-always-on; + regulator-max-microvolt = <2800000>; + regulator-min-microvolt = <2800000>; + regulator-name = "AVDD/AFVDD_2.8V"; + /* Note: The CSI module uses on-board 3.3V_SW supply */ + vin-supply = <®_module_3v3>; }; reg_usb_otg_vbus: regulator-usb-otg-vbus { compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_regulator_usbotg_pwr>; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; - enable-active-high; + regulator-min-microvolt = <5000000>; + regulator-name = "usb_otg_vbus"; status = "disabled"; }; /* on module USB hub */ reg_usb_host_vbus_hub: regulator-usb-host-vbus-hub { compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 28 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_regulator_usbhub_pwr>; - regulator-name = "usb_host_vbus_hub"; - regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio3 28 GPIO_ACTIVE_HIGH>; + regulator-min-microvolt = <5000000>; + regulator-name = "usb_host_vbus_hub"; startup-delay-us = <2000>; - enable-active-high; status = "okay"; }; reg_usb_host_vbus: regulator-usb-host-vbus { compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_regulator_usbh_pwr>; - regulator-name = "usb_host_vbus"; - regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; - enable-active-high; + regulator-min-microvolt = <5000000>; + regulator-name = "usb_host_vbus"; vin-supply = <®_usb_host_vbus_hub>; status = "disabled"; }; sound { compatible = "fsl,imx-audio-sgtl5000"; - model = "imx6q-apalis-sgtl5000"; - ssi-controller = <&ssi1>; audio-codec = <&codec>; audio-routing = "LINE_IN", "Line In Jack", "MIC_IN", "Mic Jack", "Mic Jack", "Mic Bias", "Headphone Jack", "HP_OUT"; - mux-int-port = <1>; + model = "imx6q-apalis-sgtl5000"; mux-ext-port = <4>; + mux-int-port = <1>; + ssi-controller = <&ssi1>; }; sound_spdif: sound-spdif { compatible = "fsl,imx-audio-spdif"; - model = "imx-spdif"; spdif-controller = <&spdif>; spdif-in; spdif-out; + model = "imx-spdif"; status = "disabled"; }; }; @@ -125,6 +220,10 @@ status = "disabled"; }; +&clks { + fsl,pmic-stby-poweroff; +}; + /* Apalis SPI1 */ &ecspi1 { cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>; @@ -141,6 +240,214 @@ status = "disabled"; }; +&gpio1 { + gpio-line-names = "MXM3_84", + "MXM3_4", + "MXM3_15/GPIO7", + "MXM3_96", + "MXM3_37", + "", + "MXM3_17/GPIO8", + "MXM3_14", + "MXM3_12", + "MXM3_2", + "MXM3_184", + "MXM3_180", + "MXM3_178", + "MXM3_176", + "MXM3_188", + "MXM3_186", + "MXM3_160", + "MXM3_162", + "MXM3_150", + "MXM3_144", + "MXM3_154", + "MXM3_146", + "", + "", + "MXM3_72"; +}; + +&gpio2 { + gpio-line-names = "MXM3_148", + "MXM3_152", + "MXM3_156", + "MXM3_158", + "MXM3_1/GPIO1", + "MXM3_3/GPIO2", + "MXM3_5/GPIO3", + "MXM3_7/GPIO4", + "MXM3_95", + "MXM3_6", + "MXM3_8", + "MXM3_123", + "MXM3_126", + "MXM3_128", + "MXM3_130", + "MXM3_132", + "MXM3_253", + "MXM3_251", + "MXM3_283", + "MXM3_281", + "MXM3_279", + "MXM3_277", + "MXM3_243", + "MXM3_235", + "MXM3_231", + "MXM3_229", + "MXM3_233", + "MXM3_198", + "MXM3_275", + "MXM3_273", + "MXM3_207", + "MXM3_122"; +}; + +&gpio3 { + gpio-line-names = "MXM3_271", + "MXM3_269", + "MXM3_301", + "MXM3_299", + "MXM3_297", + "MXM3_295", + "MXM3_293", + "MXM3_291", + "MXM3_289", + "MXM3_287", + "MXM3_249", + "MXM3_247", + "MXM3_245", + "MXM3_286", + "MXM3_239", + "MXM3_35", + "MXM3_205", + "MXM3_203", + "MXM3_201", + "MXM3_116", + "MXM3_114", + "MXM3_262", + "MXM3_274", + "MXM3_124", + "MXM3_110", + "MXM3_120", + "MXM3_263", + "MXM3_265", + "", + "MXM3_135", + "MXM3_261", + "MXM3_259"; +}; + +&gpio4 { + gpio-line-names = "", + "", + "", + "", + "", + "MXM3_194", + "MXM3_136", + "MXM3_134", + "MXM3_140", + "MXM3_138", + "", + "MXM3_220", + "", + "", + "MXM3_18", + "MXM3_16", + "", + "", + "MXM3_214", + "MXM3_216", + "MXM3_164"; +}; + +&gpio5 { + gpio-line-names = "MXM3_159", + "", + "", + "", + "MXM3_257", + "", + "", + "", + "", + "", + "MXM3_200", + "MXM3_196", + "MXM3_204", + "MXM3_202", + "", + "", + "", + "", + "MXM3_191", + "MXM3_197", + "MXM3_77", + "MXM3_195", + "MXM3_221", + "MXM3_225", + "MXM3_223", + "MXM3_227", + "MXM3_209", + "MXM3_211", + "MXM3_118", + "MXM3_112", + "MXM3_187", + "MXM3_185"; +}; + +&gpio6 { + gpio-line-names = "MXM3_183", + "MXM3_181", + "MXM3_179", + "MXM3_177", + "MXM3_175", + "MXM3_173", + "MXM3_255", + "MXM3_83", + "MXM3_91", + "MXM3_13/GPIO6", + "MXM3_11/GPIO5", + "MXM3_79", + "", + "", + "MXM3_190", + "MXM3_193", + "MXM3_89"; +}; + +&gpio7 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + "", + "MXM3_99", + "MXM3_85", + "MXM3_217", + "MXM3_215"; +}; + +&gpr { + ipu1_csi0_mux { + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + port@1 { + reg = <1>; + ipu1_csi0_mux_from_parallel_sensor: endpoint { + remote-endpoint = <&adv7280_to_ipu1_csi0_mux>; + }; + }; + }; +}; + &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; @@ -177,6 +484,16 @@ scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; + + atmel_mxt_ts: touchscreen@4a { + compatible = "atmel,maxtouch"; + /* These GPIOs are muxed with the iomuxc node */ + interrupt-parent = <&gpio6>; + interrupts = <10 IRQ_TYPE_EDGE_FALLING>; /* MXM3_11 */ + reg = <0x4a>; + reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>; /* MXM3_13 */ + status = "disabled"; + }; }; /* @@ -192,103 +509,105 @@ sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; - pmic: pfuze100@8 { + pmic: pmic@8 { compatible = "fsl,pfuze100"; + fsl,pmic-stby-poweroff; reg = <0x08>; regulators { sw1a_reg: sw1ab { - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <1875000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1875000>; + regulator-min-microvolt = <300000>; regulator-ramp-delay = <6250>; }; sw1c_reg: sw1c { - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <1875000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1875000>; + regulator-min-microvolt = <300000>; regulator-ramp-delay = <6250>; }; sw3a_reg: sw3a { - regulator-min-microvolt = <400000>; - regulator-max-microvolt = <1975000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1975000>; + regulator-min-microvolt = <400000>; }; swbst_reg: swbst { - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5150000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <5150000>; + regulator-min-microvolt = <5000000>; }; snvs_reg: vsnvs { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <3000000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3000000>; + regulator-min-microvolt = <1000000>; }; vref_reg: vrefddr { - regulator-boot-on; regulator-always-on; + regulator-boot-on; }; vgen1_reg: vgen1 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1550000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1550000>; + regulator-min-microvolt = <800000>; }; vgen2_reg: vgen2 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1550000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1550000>; + regulator-min-microvolt = <800000>; }; vgen3_reg: vgen3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; }; vgen4_reg: vgen4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; }; vgen5_reg: vgen5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; }; vgen6_reg: vgen6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; }; }; }; codec: sgtl5000@a { compatible = "fsl,sgtl5000"; - reg = <0x0a>; + #sound-dai-cells = <0>; + clocks = <&clks IMX6QDL_CLK_CKO>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sgtl5000>; - clocks = <&clks IMX6QDL_CLK_CKO>; + reg = <0x0a>; VDDA-supply = <®_module_3v3_audio>; VDDIO-supply = <®_module_3v3>; VDDD-supply = <&vgen4_reg>; @@ -297,15 +616,15 @@ /* STMPE811 touch screen controller */ stmpe811@41 { compatible = "st,stmpe811"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_touch_int>; - reg = <0x41>; + blocks = <0x5>; + id = <0>; interrupts = <10 IRQ_TYPE_LEVEL_LOW>; - interrupt-parent = <&gpio4>; interrupt-controller; - id = <0>; - blocks = <0x5>; + interrupt-parent = <&gpio4>; irq-trigger = <0x1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touch_int>; + reg = <0x41>; /* 3.25 MHz ADC clock speed */ st,adc-freq = <1>; /* 12-bit ADC */ @@ -315,7 +634,7 @@ /* ADC conversion time: 80 clocks */ st,sample-time = <4>; - stmpe_touchscreen: stmpe-touchscreen { + stmpe_ts: stmpe_touchscreen { compatible = "st,stmpe-ts"; /* 8 sample average control */ st,ave-ctrl = <3>; @@ -330,13 +649,14 @@ st,settling = <3>; /* 5 ms touch detect interrupt delay */ st,touch-det-delay = <5>; + status = "disabled"; }; - stmpe_adc: stmpe-adc { + stmpe_adc: stmpe_adc { compatible = "st,stmpe-adc"; + #io-channel-cells = <1>; /* forbid to use ADC channels 3-0 (touch) */ st,norequest-mask = <0x0F>; - #io-channel-cells = <1>; }; }; }; @@ -353,6 +673,90 @@ scl-gpios = <&gpio3 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; sda-gpios = <&gpio3 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; + + adv_7280: adv7280@21 { + compatible = "adi,adv7280"; + adv,force-bt656-4; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_csi0>; + reg = <0x21>; + status = "disabled"; + + port { + adv7280_to_ipu1_csi0_mux: endpoint { + bus-width = <8>; + remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; + }; + }; + }; + + ov5640_csi_cam: ov5640_mipi@3c { + compatible = "ovti,ov5640"; + AVDD-supply = <®_ov5640_2v8_a_vdd>; + DOVDD-supply = <®_ov5640_1v8_d_o_vdd>; + DVDD-supply = <®_ov5640_1v8_d_o_vdd>; + clock-names = "xclk"; + clocks = <&clks IMX6QDL_CLK_CKO2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cam_mclk>; + /* These GPIOs are muxed with the iomuxc node */ + powerdown-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; + reg = <0x3c>; + reset-gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; + status = "disabled"; + + port { + ov5640_to_mipi_csi2: endpoint { + clock-lanes = <0>; + data-lanes = <1 2>; + remote-endpoint = <&mipi_csi_from_ov5640>; + }; + }; + }; +}; + +&ipu1_di1_disp1 { + remote-endpoint = <&lcd_display_in>; +}; + +&ldb { + lvds-channel@0 { + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&lvds_panel_in>; + }; + }; + }; + + lvds-channel@1 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + + port@4 { + reg = <4>; + + lvds1_out: endpoint { + }; + }; + }; +}; + +&mipi_csi { + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + port@0 { + reg = <0>; + + mipi_csi_from_ov5640: endpoint { + clock-lanes = <0>; + data-lanes = <1 2>; + remote-endpoint = <&ov5640_to_mipi_csi2>; + }; + }; }; &pwm1 { @@ -374,7 +778,6 @@ }; &pwm4 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm4>; status = "disabled"; @@ -391,72 +794,73 @@ }; &uart1 { + fsl,dte-mode; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>; - fsl,dte-mode; uart-has-rtscts; status = "disabled"; }; &uart2 { + fsl,dte-mode; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2_dte>; - fsl,dte-mode; uart-has-rtscts; status = "disabled"; }; &uart4 { + fsl,dte-mode; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart4_dte>; - fsl,dte-mode; status = "disabled"; }; &uart5 { + fsl,dte-mode; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart5_dte>; - fsl,dte-mode; status = "disabled"; }; &usbotg { + disable-over-current; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotg>; - disable-over-current; status = "disabled"; }; /* MMC1 */ &usdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_usdhc1_8bit>; - vqmmc-supply = <®_module_3v3>; bus-width = <8>; + cd-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>; disable-wp; no-1-8-v; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_usdhc1_8bit &pinctrl_mmc_cd>; + vqmmc-supply = <®_module_3v3>; status = "disabled"; }; /* SD1 */ &usdhc2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc2>; - vqmmc-supply = <®_module_3v3>; bus-width = <4>; disable-wp; no-1-8-v; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + vqmmc-supply = <®_module_3v3>; status = "disabled"; }; /* eMMC */ &usdhc3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3>; - vqmmc-supply = <®_module_3v3>; bus-width = <8>; no-1-8-v; non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + vqmmc-supply = <®_module_3v3>; status = "okay"; }; @@ -465,49 +869,57 @@ }; &iomuxc { - pinctrl_apalis_gpio1: gpio2io04grp { + /* Mux the Apalis GPIOs */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2 + &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4 + &pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6 + &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8 + >; + + pinctrl_apalis_gpio1: apalisgpio1grp { fsl,pins = < MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x130b0 >; }; - pinctrl_apalis_gpio2: gpio2io05grp { + pinctrl_apalis_gpio2: apalisgpio2grp { fsl,pins = < MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x130b0 >; }; - pinctrl_apalis_gpio3: gpio2io06grp { + pinctrl_apalis_gpio3: apalisgpio3grp { fsl,pins = < MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x130b0 >; }; - pinctrl_apalis_gpio4: gpio2io07grp { + pinctrl_apalis_gpio4: apalisgpio4grp { fsl,pins = < MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x130b0 >; }; - pinctrl_apalis_gpio5: gpio6io10grp { + pinctrl_apalis_gpio5: apalisgpio5grp { fsl,pins = < MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x130b0 >; }; - pinctrl_apalis_gpio6: gpio6io09grp { + pinctrl_apalis_gpio6: apalisgpio6grp { fsl,pins = < MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x130b0 >; }; - pinctrl_apalis_gpio7: gpio1io02grp { + pinctrl_apalis_gpio7: apalisgpio7grp { fsl,pins = < MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x130b0 >; }; - pinctrl_apalis_gpio8: gpio1io06grp { + pinctrl_apalis_gpio8: apalisgpio8grp { fsl,pins = < MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x130b0 >; @@ -600,7 +1012,7 @@ >; }; - pinctrl_gpio_bl_on: gpioblon { + pinctrl_gpio_bl_on: gpioblongrp { fsl,pins = < MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x1b0b0 >; @@ -745,7 +1157,7 @@ >; }; - pinctrl_mmc_cd: gpiommccdgrp { + pinctrl_mmc_cd: mmccdgrp { fsl,pins = < /* MMC1 CD */ MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x000b0 @@ -776,35 +1188,35 @@ >; }; - pinctrl_regulator_usbh_pwr: gpioregusbhpwrgrp { + pinctrl_regulator_usbh_pwr: regusbhpwrgrp { fsl,pins = < /* USBH_EN */ MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x0f058 >; }; - pinctrl_regulator_usbhub_pwr: gpioregusbhubpwrgrp { + pinctrl_regulator_usbhub_pwr: regusbhubpwrgrp { fsl,pins = < /* USBH_HUB_EN */ MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x0f058 >; }; - pinctrl_regulator_usbotg_pwr: gpioregusbotgpwrgrp { + pinctrl_regulator_usbotg_pwr: regusbotgpwrgrp { fsl,pins = < /* USBO1 power en */ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x0f058 >; }; - pinctrl_reset_moci: gpioresetmocigrp { + pinctrl_reset_moci: resetmocigrp { fsl,pins = < /* RESET_MOCI control */ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x0f058 >; }; - pinctrl_sd_cd: gpiosdcdgrp { + pinctrl_sd_cd: sdcdgrp { fsl,pins = < /* SD1 CD */ MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x000b0 @@ -824,13 +1236,22 @@ >; }; - pinctrl_touch_int: gpiotouchintgrp { + pinctrl_touch_int: touchintgrp { fsl,pins = < /* STMPE811 interrupt */ MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 >; }; + /* Additional DTR, DSR, DCD */ + pinctrl_uart1_ctrl: uart1ctrlgrp { + fsl,pins = < + MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0 + MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0 + MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0 + >; + }; + pinctrl_uart1_dce: uart1dcegrp { fsl,pins = < MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 @@ -848,15 +1269,6 @@ >; }; - /* Additional DTR, DSR, DCD */ - pinctrl_uart1_ctrl: uart1ctrlgrp { - fsl,pins = < - MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0 - MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0 - MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0 - >; - }; - pinctrl_uart2_dce: uart2dcegrp { fsl,pins = < MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 @@ -910,7 +1322,7 @@ >; }; - pinctrl_usdhc1_4bit: usdhc1grp_4bit { + pinctrl_usdhc1_4bit: usdhc1-4bitgrp { fsl,pins = < MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17071 MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10071 @@ -921,7 +1333,7 @@ >; }; - pinctrl_usdhc1_8bit: usdhc1grp_8bit { + pinctrl_usdhc1_8bit: usdhc1-8bitgrp { fsl,pins = < MX6QDL_PAD_NANDF_D0__SD1_DATA4 0x17071 MX6QDL_PAD_NANDF_D1__SD1_DATA5 0x17071 diff --git a/dts/src/arm/imx6qdl-colibri.dtsi b/dts/src/arm/imx6qdl-colibri.dtsi index 7df270cea2..023e762150 100644 --- a/dts/src/arm/imx6qdl-colibri.dtsi +++ b/dts/src/arm/imx6qdl-colibri.dtsi @@ -6,6 +6,7 @@ */ #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pwm/pwm.h> / { model = "Toradex Colibri iMX6DL/S Module"; @@ -13,13 +14,13 @@ backlight: backlight { compatible = "pwm-backlight"; - brightness-levels = <0 127 191 223 239 247 251 255>; - default-brightness-level = <1>; + brightness-levels = <0 45 63 88 119 158 203 255>; + default-brightness-level = <4>; enable-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* Colibri BL_ON */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_bl_on>; power-supply = <®_module_3v3>; - pwms = <&pwm3 0 5000000>; + pwms = <&pwm3 0 5000000 PWM_POLARITY_INVERTED>; status = "disabled"; }; @@ -520,6 +521,8 @@ compatible = "fsl,sgtl5000"; clocks = <&clks IMX6QDL_CLK_CKO>; lrclk-strength = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sgtl5000>; reg = <0x0a>; #sound-dai-cells = <0>; VDDA-supply = <®_module_3v3_audio>; @@ -618,7 +621,6 @@ /* Colibri PWM<A> */ &pwm3 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm3>; status = "disabled"; @@ -739,8 +741,6 @@ pinctrl_audmux: audmuxgrp { fsl,pins = < - /* SGTL5000 sys_mclk */ - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0 MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0 MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x130b0 MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0 @@ -991,6 +991,13 @@ >; }; + pinctrl_sgtl5000: sgtl5000grp { + fsl,pins = < + /* SGTL5000 sys_mclk */ + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0 + >; + }; + pinctrl_spdif: spdifgrp { fsl,pins = < MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0 diff --git a/dts/src/arm/imx6qdl-prti6q.dtsi b/dts/src/arm/imx6qdl-prti6q.dtsi index 19578f660b..f0db0d4471 100644 --- a/dts/src/arm/imx6qdl-prti6q.dtsi +++ b/dts/src/arm/imx6qdl-prti6q.dtsi @@ -94,6 +94,9 @@ pinctrl-0 = <&pinctrl_usdhc3>; bus-width = <8>; non-removable; + no-1-8-v; + no-sd; + no-sdio; status = "okay"; }; diff --git a/dts/src/arm/imx6qdl-skov-cpu-revc.dtsi b/dts/src/arm/imx6qdl-skov-cpu-revc.dtsi index 69ae430a53..8254bce1b8 100644 --- a/dts/src/arm/imx6qdl-skov-cpu-revc.dtsi +++ b/dts/src/arm/imx6qdl-skov-cpu-revc.dtsi @@ -15,13 +15,13 @@ reg = <0>; spi-max-frequency = <1000000>; interrupts-extended = <&gpio3 19 IRQ_TYPE_LEVEL_LOW>; - vcc-supply = <®_3v3>; + vcc-supply = <®_3v3>; pendown-gpio = <&gpio3 19 GPIO_ACTIVE_LOW>; ti,x-plate-ohms = /bits/ 16 <850>; ti,y-plate-ohms = /bits/ 16 <295>; ti,pressure-min = /bits/ 16 <2>; ti,pressure-max = /bits/ 16 <1500>; - ti,vref-mv = /bits/ 16 <3300>; + ti,vref-mv = /bits/ 16 <3300>; ti,settle-delay-usec = /bits/ 16 <15>; ti,vref-delay-usecs = /bits/ 16 <0>; ti,penirq-recheck-delay-usecs = /bits/ 16 <100>; diff --git a/dts/src/arm/imx6qdl-skov-cpu.dtsi b/dts/src/arm/imx6qdl-skov-cpu.dtsi index 77a91a97e6..3def1b621c 100644 --- a/dts/src/arm/imx6qdl-skov-cpu.dtsi +++ b/dts/src/arm/imx6qdl-skov-cpu.dtsi @@ -149,6 +149,16 @@ gpio = <&gpio4 11 GPIO_ACTIVE_LOW>; }; + reg_tft_vcom: regulator-tft-vcom { + compatible = "pwm-regulator"; + pwms = <&pwm3 0 20000 0>; + regulator-name = "tft_vcom"; + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + regulator-always-on; + voltage-table = <3600000 26>; + }; + reg_vcc_mmc: regulator-vcc-mmc { compatible = "regulator-fixed"; pinctrl-names = "default"; diff --git a/dts/src/arm/imx6qdl.dtsi b/dts/src/arm/imx6qdl.dtsi index 652feff334..4f7fefc14d 100644 --- a/dts/src/arm/imx6qdl.dtsi +++ b/dts/src/arm/imx6qdl.dtsi @@ -143,7 +143,7 @@ #phy-cells = <0>; }; - soc { + soc: soc { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; @@ -290,7 +290,7 @@ status = "disabled"; }; - bus@2000000 { /* AIPS1 */ + aips1: bus@2000000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -941,7 +941,7 @@ }; }; - bus@2100000 { /* AIPS2 */ + aips2: bus@2100000 { /* AIPS2 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/dts/src/arm/imx6sl-tolino-shine2hd.dts b/dts/src/arm/imx6sl-tolino-shine2hd.dts index a17b8bbbdb..663ee9df79 100644 --- a/dts/src/arm/imx6sl-tolino-shine2hd.dts +++ b/dts/src/arm/imx6sl-tolino-shine2hd.dts @@ -27,7 +27,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; - cover { + key-cover { label = "Cover"; gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; linux,code = <SW_LID>; @@ -35,19 +35,19 @@ wakeup-source; }; - fl { + key-fl { label = "Frontlight"; gpios = <&gpio3 26 GPIO_ACTIVE_LOW>; linux,code = <KEY_BRIGHTNESS_CYCLE>; }; - home { + key-home { label = "Home"; gpios = <&gpio3 25 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOME>; }; - power { + key-power { label = "Power"; gpios = <&gpio5 8 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; @@ -60,7 +60,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_led>; - on { + led-0 { label = "tolinoshine2hd:white:on"; gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; linux,default-trigger = "timer"; diff --git a/dts/src/arm/imx6sx.dtsi b/dts/src/arm/imx6sx.dtsi index fc6334336b..4d075e2bf7 100644 --- a/dts/src/arm/imx6sx.dtsi +++ b/dts/src/arm/imx6sx.dtsi @@ -154,7 +154,7 @@ #phy-cells = <0>; }; - soc { + soc: soc { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; diff --git a/dts/src/arm/imx6ul-kontron-n6x1x-s.dtsi b/dts/src/arm/imx6ul-kontron-n6x1x-s.dtsi index a6cf0f21c6..43868311f4 100644 --- a/dts/src/arm/imx6ul-kontron-n6x1x-s.dtsi +++ b/dts/src/arm/imx6ul-kontron-n6x1x-s.dtsi @@ -72,7 +72,6 @@ &adc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_adc1>; - num-channels = <3>; vref-supply = <®_vref_adc>; status = "okay"; }; diff --git a/dts/src/arm/imx6ul-phytec-segin.dtsi b/dts/src/arm/imx6ul-phytec-segin.dtsi index 0d4ba9494c..38ea4dcfa2 100644 --- a/dts/src/arm/imx6ul-phytec-segin.dtsi +++ b/dts/src/arm/imx6ul-phytec-segin.dtsi @@ -83,11 +83,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_adc1>; vref-supply = <®_adc1_vref_3v3>; - /* - * driver can not separate a specific channel so we request 4 channels - * here - we need only the fourth channel - */ - num-channels = <4>; status = "disabled"; }; diff --git a/dts/src/arm/imx6ul-tqma6ul2l.dtsi b/dts/src/arm/imx6ul-tqma6ul2l.dtsi index caf2c5d03f..4b87e2dc70 100644 --- a/dts/src/arm/imx6ul-tqma6ul2l.dtsi +++ b/dts/src/arm/imx6ul-tqma6ul2l.dtsi @@ -14,7 +14,7 @@ }; &usdhc2 { - fsl,tuning-step= <6>; + fsl,tuning-step = <6>; }; &iomuxc { diff --git a/dts/src/arm/imx6ul.dtsi b/dts/src/arm/imx6ul.dtsi index afeec01f65..c95efd1d8c 100644 --- a/dts/src/arm/imx6ul.dtsi +++ b/dts/src/arm/imx6ul.dtsi @@ -64,20 +64,18 @@ clock-frequency = <696000000>; clock-latency = <61036>; /* two CLK32 periods */ #cooling-cells = <2>; - operating-points = < + operating-points = /* kHz uV */ - 696000 1275000 - 528000 1175000 - 396000 1025000 - 198000 950000 - >; - fsl,soc-operating-points = < + <696000 1275000>, + <528000 1175000>, + <396000 1025000>, + <198000 950000>; + fsl,soc-operating-points = /* KHz uV */ - 696000 1275000 - 528000 1175000 - 396000 1175000 - 198000 1175000 - >; + <696000 1275000>, + <528000 1175000>, + <396000 1175000>, + <198000 1175000>; clocks = <&clks IMX6UL_CLK_ARM>, <&clks IMX6UL_CLK_PLL2_BUS>, <&clks IMX6UL_CLK_PLL2_PFD2>, @@ -139,7 +137,7 @@ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; }; - soc { + soc: soc { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; @@ -149,6 +147,9 @@ ocram: sram@900000 { compatible = "mmio-sram"; reg = <0x00900000 0x20000>; + ranges = <0 0x00900000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; }; intc: interrupt-controller@a01000 { @@ -543,7 +544,7 @@ }; kpp: keypad@20b8000 { - compatible = "fsl,imx6ul-kpp", "fsl,imx6q-kpp", "fsl,imx21-kpp"; + compatible = "fsl,imx6ul-kpp", "fsl,imx21-kpp"; reg = <0x020b8000 0x4000>; interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6UL_CLK_KPP>; @@ -923,7 +924,6 @@ reg = <0x02198000 0x4000>; interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6UL_CLK_ADC1>; - num-channels = <2>; clock-names = "adc"; fsl,adck-max-frequency = <30000000>, <40000000>, <20000000>; @@ -998,7 +998,7 @@ }; csi: csi@21c4000 { - compatible = "fsl,imx6ul-csi", "fsl,imx7-csi"; + compatible = "fsl,imx6ul-csi"; reg = <0x021c4000 0x4000>; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6UL_CLK_CSI>; @@ -1007,7 +1007,7 @@ }; lcdif: lcdif@21c8000 { - compatible = "fsl,imx6ul-lcdif", "fsl,imx28-lcdif"; + compatible = "fsl,imx6ul-lcdif", "fsl,imx6sx-lcdif"; reg = <0x021c8000 0x4000>; interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6UL_CLK_LCDIF_PIX>, @@ -1028,7 +1028,7 @@ qspi: spi@21e0000 { #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,imx6ul-qspi", "fsl,imx6sx-qspi"; + compatible = "fsl,imx6ul-qspi"; reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>; reg-names = "QuadSPI", "QuadSPI-memory"; interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; diff --git a/dts/src/arm/imx6ull-colibri.dtsi b/dts/src/arm/imx6ull-colibri.dtsi index 2c3ae715c6..577a424b0e 100644 --- a/dts/src/arm/imx6ull-colibri.dtsi +++ b/dts/src/arm/imx6ull-colibri.dtsi @@ -94,7 +94,6 @@ }; &adc1 { - num-channels = <10>; vref-supply = <®_module_3v3_avdd>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_adc1>; diff --git a/dts/src/arm/imx6ull-tqma6ull2.dtsi b/dts/src/arm/imx6ull-tqma6ull2.dtsi index 326e6da91e..8541cb3f3b 100644 --- a/dts/src/arm/imx6ull-tqma6ull2.dtsi +++ b/dts/src/arm/imx6ull-tqma6ull2.dtsi @@ -14,7 +14,7 @@ }; &usdhc2 { - fsl,tuning-step= <6>; + fsl,tuning-step = <6>; /* Errata ERR010450 Workaround */ max-frequency = <99000000>; assigned-clocks = <&clks IMX6UL_CLK_USDHC2_SEL>, <&clks IMX6UL_CLK_USDHC2>; diff --git a/dts/src/arm/imx6ull-tqma6ull2l.dtsi b/dts/src/arm/imx6ull-tqma6ull2l.dtsi index 8e4d5cd186..be593d47e3 100644 --- a/dts/src/arm/imx6ull-tqma6ull2l.dtsi +++ b/dts/src/arm/imx6ull-tqma6ull2l.dtsi @@ -14,7 +14,7 @@ }; &usdhc2 { - fsl,tuning-step= <6>; + fsl,tuning-step = <6>; /* Errata ERR010450 Workaround */ max-frequency = <99000000>; assigned-clocks = <&clks IMX6UL_CLK_USDHC2_SEL>, <&clks IMX6UL_CLK_USDHC2>; diff --git a/dts/src/arm/imx6ull.dtsi b/dts/src/arm/imx6ull.dtsi index 9bf67490ac..2bccd45e9f 100644 --- a/dts/src/arm/imx6ull.dtsi +++ b/dts/src/arm/imx6ull.dtsi @@ -50,7 +50,7 @@ }; / { - soc { + soc: soc { aips3: bus@2200000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; diff --git a/dts/src/arm/imx6ulz-bsh-smm-m2.dts b/dts/src/arm/imx6ulz-bsh-smm-m2.dts index 59bcfc9a6b..c92e4e2f6a 100644 --- a/dts/src/arm/imx6ulz-bsh-smm-m2.dts +++ b/dts/src/arm/imx6ulz-bsh-smm-m2.dts @@ -29,6 +29,10 @@ status = "okay"; }; +&snvs_poweroff { + status = "okay"; +}; + &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; diff --git a/dts/src/arm/imx7-colibri-aster.dtsi b/dts/src/arm/imx7-colibri-aster.dtsi index b770fc9379..fa488a6de0 100644 --- a/dts/src/arm/imx7-colibri-aster.dtsi +++ b/dts/src/arm/imx7-colibri-aster.dtsi @@ -1,169 +1,79 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2017-2020 Toradex AG - * + * Copyright 2017-2022 Toradex */ - -#include <dt-bindings/input/input.h> -#include <dt-bindings/pwm/pwm.h> - -/ { - chosen { - stdout-path = "serial0:115200n8"; - }; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpiokeys>; - - power { - label = "Wake-Up"; - gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; - linux,code = <KEY_WAKEUP>; - debounce-interval = <10>; - wakeup-source; - }; - }; - - panel: panel { - compatible = "edt,et057090dhu"; - backlight = <&bl>; - power-supply = <®_3v3>; - - port { - panel_in: endpoint { - remote-endpoint = <&lcdif_out>; - }; - }; - }; - - reg_3v3: regulator-3v3 { - compatible = "regulator-fixed"; - regulator-name = "3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - reg_5v0: regulator-5v0 { - compatible = "regulator-fixed"; - regulator-name = "5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - reg_usbh_vbus: regulator-usbh-vbus { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbh_reg>; - regulator-name = "VCC_USB[1-4]"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio4 7 GPIO_ACTIVE_LOW>; - vin-supply = <®_5v0>; - }; -}; - +/* Colibri AD0 to AD3 */ &adc1 { status = "okay"; }; -/* - * ADC2 is not available on the Aster board and - * conflicts with AD7879 resistive touchscreen. - */ -&adc2 { - status = "disabled"; -}; - -&bl { - brightness-levels = <0 4 8 16 32 64 128 255>; - default-brightness-level = <6>; - power-supply = <®_3v3>; +/* Colibri SSP */ +&ecspi3 { + cs-gpios = < + &gpio4 11 GPIO_ACTIVE_LOW /* SODIMM 86 / regular SSPFRM as UNO_SPI_CS or */ + &gpio4 23 GPIO_ACTIVE_LOW /* SODIMM 65 / already muxed pinctrl_gpio2 as SPI_CE0_N */ + &gpio4 22 GPIO_ACTIVE_LOW /* SODIMM 85 / already muxed pinctrl_gpio2 as SPI_CE1_N */ + >; status = "okay"; }; +/* Colibri Fast Ethernet */ &fec1 { status = "okay"; }; +/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */ &i2c4 { status = "okay"; - - /* Microchip/Atmel maxtouch controller */ - touchscreen@4a { - compatible = "atmel,maxtouch"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpiotouch>; - reg = <0x4a>; - interrupt-parent = <&gpio2>; - interrupts = <15 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 107 */ - reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; /* SODIMM 106 */ - }; - - /* M41T0M6 real time clock on carrier board */ - rtc: rtc@68 { - compatible = "st,m41t0"; - reg = <0x68>; - }; -}; - -&iomuxc { - pinctrl_gpiotouch: touchgpios { - fsl,pins = < - MX7D_PAD_EPDC_DATA15__GPIO2_IO15 0x74 - MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x14 - >; - }; -}; - -&lcdif { - status = "okay"; - - port { - lcdif_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; }; +/* Colibri PWM<A> */ &pwm1 { status = "okay"; }; +/* Colibri PWM<B> */ &pwm2 { status = "okay"; }; +/* Colibri PWM<C> */ &pwm3 { status = "okay"; }; +/* Colibri PWM<D> */ &pwm4 { status = "okay"; }; +/* M41T0M6 real time clock */ +&rtc { + status = "okay"; +}; + +/* Colibri UART_A */ &uart1 { status = "okay"; }; +/* Colibri UART_B */ &uart2 { status = "okay"; }; +/* Colibri UART_C */ &uart3 { status = "okay"; }; +/* Colibri USBC */ &usbotg1 { status = "okay"; }; +/* Colibri MMC/SD */ &usdhc1 { - keep-power-in-suspend; - no-1-8-v; - wakeup-source; - vmmc-supply = <®_3v3>; status = "okay"; }; diff --git a/dts/src/arm/imx7-colibri-eval-v3.dtsi b/dts/src/arm/imx7-colibri-eval-v3.dtsi index 3b9df8c82a..826f13da5b 100644 --- a/dts/src/arm/imx7-colibri-eval-v3.dtsi +++ b/dts/src/arm/imx7-colibri-eval-v3.dtsi @@ -1,194 +1,110 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2016-2020 Toradex + * Copyright 2016-2022 Toradex */ / { - aliases { - rtc0 = &rtc; - rtc1 = &snvs_rtc; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - /* fixed crystal dedicated to mpc258x */ + /* Fixed crystal dedicated to MCP2515. */ clk16m: clk16m { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <16000000>; }; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpiokeys>; - - power { - label = "Wake-Up"; - gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; - linux,code = <KEY_WAKEUP>; - debounce-interval = <10>; - wakeup-source; - }; - }; - - panel: panel { - compatible = "edt,et057090dhu"; - backlight = <&bl>; - power-supply = <®_3v3>; - - port { - panel_in: endpoint { - remote-endpoint = <&lcdif_out>; - }; - }; - }; - - reg_3v3: regulator-3v3 { - compatible = "regulator-fixed"; - regulator-name = "3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - reg_5v0: regulator-5v0 { - compatible = "regulator-fixed"; - regulator-name = "5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - reg_usbh_vbus: regulator-usbh-vbus { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbh_reg>; - regulator-name = "VCC_USB[1-4]"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio4 7 GPIO_ACTIVE_LOW>; - vin-supply = <®_5v0>; - }; -}; - -&bl { - brightness-levels = <0 4 8 16 32 64 128 255>; - default-brightness-level = <6>; - power-supply = <®_3v3>; - - status = "okay"; }; +/* Colibri AD0 to AD3 */ &adc1 { status = "okay"; }; -&adc2 { - status = "okay"; +/* + * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3. + * So if you enable following capacitive touch controller, disable pwm2/pwm3 first. + */ +&atmel_mxt_ts { + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 28 / INT */ + pinctrl-0 = <&pinctrl_atmel_adapter>; + reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; /* SODIMM 30 / RST */ + status = "disabled"; }; +/* Colibri SSP */ &ecspi3 { status = "okay"; mcp2515: can@0 { + clocks = <&clk16m>; compatible = "microchip,mcp2515"; + interrupt-parent = <&gpio5>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_can_int>; reg = <0>; - clocks = <&clk16m>; - interrupt-parent = <&gpio5>; - interrupts = <2 IRQ_TYPE_EDGE_FALLING>; spi-max-frequency = <10000000>; vdd-supply = <®_3v3>; xceiver-supply = <®_5v0>; - status = "okay"; }; }; +/* Colibri Fast Ethernet */ &fec1 { status = "okay"; }; +/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */ &i2c4 { status = "okay"; - - /* - * Touchscreen is using SODIMM 28/30, also used for PWM<B>, PWM<C>, - * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms - */ - touchscreen@4a { - compatible = "atmel,maxtouch"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpiotouch>; - reg = <0x4a>; - interrupt-parent = <&gpio1>; - interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 28 */ - reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; /* SODIMM 30 */ - status = "disabled"; - }; - - /* M41T0M6 real time clock on carrier board */ - rtc: rtc@68 { - compatible = "st,m41t0"; - reg = <0x68>; - }; -}; - -&lcdif { - status = "okay"; - - port { - lcdif_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; }; +/* Colibri PWM<A> */ &pwm1 { status = "okay"; }; +/* Colibri PWM<B> */ &pwm2 { + /* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */ status = "okay"; }; +/* Colibri PWM<C> */ &pwm3 { + /* The pwm3 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */ status = "okay"; }; +/* Colibri PWM<D> */ &pwm4 { status = "okay"; }; +/* M41T0M6 real time clock */ +&rtc { + status = "okay"; +}; + +/* Colibri UART_A */ &uart1 { status = "okay"; }; +/* Colibri UART_B */ &uart2 { status = "okay"; }; +/* Colibri UART_C */ &uart3 { status = "okay"; }; +/* Colibri USBC */ &usbotg1 { status = "okay"; }; +/* Colibri MMC/SD */ &usdhc1 { - keep-power-in-suspend; - wakeup-source; - vmmc-supply = <®_3v3>; status = "okay"; }; - -&iomuxc { - pinctrl_gpiotouch: touchgpios { - fsl,pins = < - MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x74 - MX7D_PAD_GPIO1_IO10__GPIO1_IO10 0x14 - >; - }; -}; diff --git a/dts/src/arm/imx7-colibri-iris-v2.dtsi b/dts/src/arm/imx7-colibri-iris-v2.dtsi new file mode 100644 index 0000000000..6e19961358 --- /dev/null +++ b/dts/src/arm/imx7-colibri-iris-v2.dtsi @@ -0,0 +1,112 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/ { + reg_3v3_vmmc: regulator-3v3-vmmc { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* SODIMM 100 */ + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "3v3_vmmc"; + startup-delay-us = <100>; + }; +}; + +/* Colibri AD0 to AD3 */ +&adc1 { + status = "okay"; +}; + +/* Colibri SSP */ +&ecspi3 { + status = "okay"; +}; + +/* Colibri Fast Ethernet */ +&fec1 { + status = "okay"; +}; + +&gpio2 { + /* + * uart_b_c_on_x14_enable turns the UART transceiver for UART2 and 5 on. If one wants to + * turn the transceiver off, that property has to be deleted and the gpio handled in + * userspace. + * The same applies to uart_a_on_x13_enable where the UART_A transceiver is turned on. + */ + uart-b-c-on-x14-enable-hog { + gpio-hog; + gpios = <27 GPIO_ACTIVE_HIGH>; /* SODIMM 104 */ + output-high; + }; +}; + +&gpio5 { + uart-a-on-x13-enable-hog { + gpio-hog; + gpios = <17 GPIO_ACTIVE_HIGH>; /* SODIMM 102 */ + output-high; + }; +}; + +/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */ +&i2c4 { + status = "okay"; +}; + +/* Colibri PWM<A> */ +&pwm1 { + status = "okay"; +}; + +/* Colibri PWM<B> */ +&pwm2 { + status = "okay"; +}; + +/* Colibri PWM<C> */ +&pwm3 { + status = "okay"; +}; + +/* Colibri PWM<D> */ +&pwm4 { + status = "okay"; +}; + +/* M41T0M6 real time clock */ +&rtc { + status = "okay"; +}; + +/* Colibri UART_A */ +&uart1 { + status = "okay"; +}; + +/* Colibri UART_B */ +&uart2 { + status = "okay"; +}; + +/* Colibri UART_C */ +&uart3 { + status = "okay"; +}; + +/* Colibri USBC */ +&usbotg1 { + status = "okay"; +}; + +/* Colibri MMC/SD, UHS-I capable uSD slot */ +&usdhc1 { + cap-power-off-card; + /delete-property/ keep-power-in-suspend; + /delete-property/ no-1-8-v; + vmmc-supply = <®_3v3_vmmc>; + status = "okay"; +}; diff --git a/dts/src/arm/imx7-colibri-iris.dtsi b/dts/src/arm/imx7-colibri-iris.dtsi new file mode 100644 index 0000000000..175c5d478d --- /dev/null +++ b/dts/src/arm/imx7-colibri-iris.dtsi @@ -0,0 +1,108 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/* Colibri AD0 to AD3 */ +&adc1 { + status = "okay"; +}; + +/* + * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3. + * So if you enable following capacitive touch controller, disable pwm2/pwm3 first. + */ +&atmel_mxt_ts { + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 28 / INT */ + pinctrl-0 = <&pinctrl_atmel_adapter>; + reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; /* SODIMM 30 / RST */ +}; + +/* Colibri SSP */ +&ecspi3 { + status = "okay"; +}; + +/* Colibri Fast Ethernet */ +&fec1 { + status = "okay"; +}; + +&gpio2 { + /* + * uart25 turns the UART transceiver for UART2 and 5 on. If one wants to turn the + * transceiver off, that property has to be deleted and the gpio handled in userspace. + * The same applies to uart1_tx_on where the UART1 transceiver is turned on. + */ + uart25-tx-on-hog { + gpio-hog; + gpios = <27 GPIO_ACTIVE_HIGH>; /* SODIMM 104 */ + output-high; + }; +}; + +&gpio5 { + uart1-tx-on-hog { + gpio-hog; + gpios = <17 GPIO_ACTIVE_HIGH>; /* SODIMM 102 */ + output-high; + }; +}; + +/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */ +&i2c4 { + status = "okay"; +}; + +/* Colibri PWM<A> */ +&pwm1 { + status = "okay"; +}; + +/* Colibri PWM<B> */ +&pwm2 { + /* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */ + status = "okay"; +}; + +/* Colibri PWM<C> */ +&pwm3 { + /* The pwm3 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */ + status = "okay"; +}; + +/* Colibri PWM<D> */ +&pwm4 { + status = "okay"; +}; + +/* M41T0M6 real time clock */ +&rtc { + status = "okay"; +}; + +/* Colibri UART_A */ +&uart1 { + status = "okay"; +}; + +/* Colibri UART_B */ +&uart2 { + status = "okay"; +}; + +/* Colibri UART_C */ +&uart3 { + status = "okay"; +}; + +/* Colibri USBC */ +&usbotg1 { + status = "okay"; +}; + +/* Colibri MMC/SD */ +&usdhc1 { + status = "okay"; +}; diff --git a/dts/src/arm/imx7-colibri.dtsi b/dts/src/arm/imx7-colibri.dtsi index f1c60b0cb1..a8c31ee656 100644 --- a/dts/src/arm/imx7-colibri.dtsi +++ b/dts/src/arm/imx7-colibri.dtsi @@ -1,96 +1,198 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2016-2020 Toradex + * Copyright 2016-2022 Toradex */ +#include <dt-bindings/pwm/pwm.h> + / { - bl: backlight { + aliases { + rtc0 = &rtc; + rtc1 = &snvs_rtc; + }; + + backlight: backlight { + brightness-levels = <0 45 63 88 119 158 203 255>; compatible = "pwm-backlight"; + default-brightness-level = <4>; + enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_bl_on>; - pwms = <&pwm1 0 5000000 0>; - enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; + power-supply = <®_module_3v3>; + pwms = <&pwm1 0 6666667 PWM_POLARITY_INVERTED>; + status = "disabled"; }; - reg_module_3v3: regulator-module-3v3 { + chosen { + stdout-path = "serial0:115200n8"; + }; + + extcon_usbc_det: usbc-det { + compatible = "linux,extcon-usb-gpio"; + debounce = <25>; + id-gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>; /* SODIMM 137 / USBC_DET */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbc_det>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiokeys>; + + wakeup { + debounce-interval = <10>; + gpios = <&gpio1 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* SODIMM 45 */ + label = "Wake-Up"; + linux,code = <KEY_WAKEUP>; + wakeup-source; + }; + }; + + panel_dpi: panel-dpi { + backlight = <&backlight>; + compatible = "edt,et057090dhu"; + power-supply = <®_3v3>; + status = "disabled"; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcdif_out>; + }; + }; + }; + + reg_3v3: regulator-3v3 { compatible = "regulator-fixed"; - regulator-name = "+V3.3"; - regulator-min-microvolt = <3300000>; + regulator-always-on; regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "3.3V"; + }; + + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; regulator-always-on; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "5V"; + }; + + reg_module_3v3: regulator-module-3v3 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "+V3.3"; }; reg_module_3v3_avdd: regulator-module-3v3-avdd { compatible = "regulator-fixed"; + regulator-always-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; regulator-name = "+V3.3_AVDD_AUDIO"; + }; + + reg_module_3v3_eth: regulator-module-3v3-eth { + compatible = "regulator-fixed"; + off-on-delay-us = <200000>; + regulator-name = "+V3.3_ETH"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - regulator-always-on; + regulator-boot-on; + startup-delay-us = <200000>; + vin-supply = <®_LDO1>; + }; + + reg_usbh_vbus: regulator-usbh-vbus { + compatible = "regulator-fixed"; + gpio = <&gpio4 7 GPIO_ACTIVE_LOW>; /* SODIMM 129 / USBH_PEN */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh_reg>; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "VCC_USB[1-4]"; + vin-supply = <®_5v0>; }; sound { compatible = "simple-audio-card"; - simple-audio-card,name = "imx7-sgtl5000"; - simple-audio-card,format = "i2s"; simple-audio-card,bitclock-master = <&dailink_master>; + simple-audio-card,format = "i2s"; simple-audio-card,frame-master = <&dailink_master>; + simple-audio-card,name = "imx7-sgtl5000"; + simple-audio-card,cpu { sound-dai = <&sai1>; }; dailink_master: simple-audio-card,codec { - sound-dai = <&codec>; clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>; + sound-dai = <&codec>; }; }; }; +/* Colibri AD0 to AD3 */ &adc1 { vref-supply = <®_DCDC3>; }; -&adc2 { - vref-supply = <®_DCDC3>; -}; +/* ADC2 is not available as it conflicts with AD7879 resistive touchscreen. */ &cpu0 { cpu-supply = <®_DCDC2>; }; +/* Colibri SSP */ &ecspi3 { + cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; /* SODIMM 86 / SSPFRM */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi3 &pinctrl_ecspi3_cs>; - cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; }; +/* Colibri Fast Ethernet */ &fec1 { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&pinctrl_enet1>; - pinctrl-1 = <&pinctrl_enet1_sleep>; - clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>, - <&clks IMX7D_ENET_AXI_ROOT_CLK>, - <&clks IMX7D_ENET1_TIME_ROOT_CLK>, - <&clks IMX7D_PLL_ENET_MAIN_50M_CLK>; - clock-names = "ipg", "ahb", "ptp", "enet_clk_ref"; - assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>, - <&clks IMX7D_ENET1_TIME_ROOT_CLK>; assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; assigned-clock-rates = <0>, <100000000>; - phy-mode = "rmii"; - phy-supply = <®_LDO1>; + assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>, + <&clks IMX7D_ENET1_TIME_ROOT_CLK>; + clock-names = "ipg", "ahb", "ptp", "enet_clk_ref"; + clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>, + <&clks IMX7D_ENET_AXI_ROOT_CLK>, + <&clks IMX7D_ENET1_TIME_ROOT_CLK>, + <&clks IMX7D_PLL_ENET_MAIN_50M_CLK>; fsl,magic-packet; + phy-handle = <ðphy0>; + phy-mode = "rmii"; + phy-supply = <®_module_3v3_eth>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_enet1>; + pinctrl-1 = <&pinctrl_enet1_sleep>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + /* Micrel KSZ8041RNL */ + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + max-speed = <100>; + micrel,led-mode = <0>; + reg = <0>; + }; + }; }; &flexcan1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexcan1>; - status = "disabled"; }; &flexcan2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexcan2>; - status = "disabled"; }; &gpio1 { @@ -271,14 +373,16 @@ "SODIMM_137"; }; +/* NAND on such SKUs */ &gpmi { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpmi_nand>; fsl,use-minimum-ecc; - nand-on-flash-bbt; nand-ecc-mode = "hw"; + nand-on-flash-bbt; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; }; +/* On-module Power I2C */ &i2c1 { clock-frequency = <100000>; pinctrl-names = "default", "gpio"; @@ -286,33 +390,33 @@ pinctrl-1 = <&pinctrl_i2c1_recovery &pinctrl_i2c1_int>; scl-gpios = <&gpio1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; sda-gpios = <&gpio1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - status = "okay"; codec: sgtl5000@a { - compatible = "fsl,sgtl5000"; #sound-dai-cells = <0>; - reg = <0x0a>; clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>; + compatible = "fsl,sgtl5000"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sai1_mclk>; + reg = <0xa>; VDDA-supply = <®_module_3v3_avdd>; - VDDIO-supply = <®_module_3v3>; VDDD-supply = <®_DCDC3>; + VDDIO-supply = <®_module_3v3>; }; - ad7879@2c { + ad7879_ts: touchscreen@2c { + adi,acquisition-time = /bits/ 8 <1>; + adi,averaging = /bits/ 8 <1>; + adi,conversion-interval = /bits/ 8 <255>; + adi,first-conversion-delay = /bits/ 8 <3>; + adi,median-filter-size = /bits/ 8 <2>; + adi,resistance-plate-x = <120>; compatible = "adi,ad7879-1"; - reg = <0x2c>; interrupt-parent = <&gpio1>; interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + reg = <0x2c>; touchscreen-max-pressure = <4096>; - adi,resistance-plate-x = <120>; - adi,first-conversion-delay = /bits/ 8 <3>; - adi,acquisition-time = /bits/ 8 <1>; - adi,median-filter-size = /bits/ 8 <2>; - adi,averaging = /bits/ 8 <1>; - adi,conversion-interval = /bits/ 8 <255>; + status = "disabled"; }; pmic@33 { @@ -320,71 +424,81 @@ reg = <0x33>; regulators { - reg_DCDC1: DCDC1 { /* V1.0_SOC */ - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1100000>; - regulator-boot-on; + reg_DCDC1: DCDC1 { regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1100000>; + regulator-min-microvolt = <1000000>; + regulator-name = "+V1.0_SOC"; }; - reg_DCDC2: DCDC2 { /* V1.1_ARM */ - regulator-min-microvolt = <975000>; - regulator-max-microvolt = <1100000>; - regulator-boot-on; + reg_DCDC2: DCDC2 { regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1100000>; + regulator-min-microvolt = <975000>; + regulator-name = "+V1.1_ARM"; }; - reg_DCDC3: DCDC3 { /* V1.8 */ - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; + reg_DCDC3: DCDC3 { regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "+V1.8"; }; - reg_DCDC4: DCDC4 { /* V1.35_DRAM */ - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <1350000>; - regulator-boot-on; + reg_DCDC4: DCDC4 { regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1350000>; + regulator-min-microvolt = <1350000>; + regulator-name = "+V1.35_DRAM"; }; - reg_LDO1: LDO1 { /* PWR_EN_+V3.3_ETH */ - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; + reg_LDO1: LDO1 { regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "PWR_EN_+V3.3_ETH"; }; - reg_LDO2: LDO2 { /* +V1.8_SD */ - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; + reg_LDO2: LDO2 { regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; + regulator-name = "+V1.8_SD"; }; - reg_LDO3: LDO3 { /* PWR_EN_+V3.3_LPSR */ - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; + reg_LDO3: LDO3 { regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "PWR_EN_+V3.3_LPSR"; }; - reg_LDO4: LDO4 { /* V1.8_LPSR */ - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; + reg_LDO4: LDO4 { regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "+V1.8_LPSR"; }; - reg_LDO5: LDO5 { /* PWR_EN_+V3.3 */ - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; + reg_LDO5: LDO5 { regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "PWR_EN_+V3.3"; }; }; }; }; +/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */ &i2c4 { clock-frequency = <100000>; pinctrl-names = "default", "gpio"; @@ -392,36 +506,69 @@ pinctrl-1 = <&pinctrl_i2c4_recovery>; scl-gpios = <&gpio7 8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; sda-gpios = <&gpio7 9 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "disabled"; + + /* Atmel maxtouch controller */ + atmel_mxt_ts: touchscreen@4a { + compatible = "atmel,maxtouch"; + interrupt-parent = <&gpio2>; + interrupts = <15 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 107 / INT */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_atmel_connector>; + reg = <0x4a>; + reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; /* SODIMM 106 / RST */ + status = "disabled"; + }; + + /* M41T0M6 real time clock on carrier board */ + rtc: rtc@68 { + compatible = "st,m41t0"; + reg = <0x68>; + status = "disabled"; + }; }; &lcdif { + assigned-clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_PLL_VIDEO_POST_DIV>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>; + status = "disabled"; + + port { + lcdif_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; }; +/* Colibri PWM<A> */ &pwm1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; }; +/* Colibri PWM<B> */ &pwm2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm2>; }; +/* Colibri PWM<C> */ &pwm3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm3>; }; +/* Colibri PWM<D> */ &pwm4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm4>; }; ®_1p0d { - vin-supply = <®_DCDC3>; + vin-supply = <®_DCDC3>; /* VDDA_1P8_IN */ }; &sai1 { @@ -430,237 +577,257 @@ status = "okay"; }; +/* Colibri UART_A */ &uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_ctrl1 &pinctrl_uart1_ctrl2>; assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>; assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; - uart-has-rtscts; fsl,dte-mode; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_ctrl1 &pinctrl_uart1_ctrl2>; + uart-has-rtscts; }; +/* Colibri UART_B */ &uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>; assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; - uart-has-rtscts; fsl,dte-mode; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + uart-has-rtscts; }; +/* Colibri UART_C */ &uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3>; assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>; assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; fsl,dte-mode; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; }; +/* Colibri USBC */ &usbotg1 { - dr_mode = "host"; + dr_mode = "otg"; + extcon = <0>, <&extcon_usbc_det>; }; +/* Colibri MMC/SD */ &usdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_cd_usdhc1>; cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; disable-wp; + no-1-8-v; + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_cd_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_cd_usdhc1>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_cd_usdhc1>; + pinctrl-3 = <&pinctrl_usdhc1_sleep &pinctrl_cd_usdhc1_sleep>; + vmmc-supply = <®_3v3>; vqmmc-supply = <®_LDO2>; + wakeup-source; }; +/* eMMC on 1GB (eMMC) SKUs */ &usdhc3 { - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc3>; - pinctrl-1 = <&pinctrl_usdhc3_100mhz>; - pinctrl-2 = <&pinctrl_usdhc3_200mhz>; assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>; assigned-clock-rates = <400000000>; bus-width = <8>; fsl,tuning-step = <2>; - vmmc-supply = <®_module_3v3>; - vqmmc-supply = <®_DCDC3>; non-removable; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; sdhci-caps-mask = <0x80000000 0x0>; + vmmc-supply = <®_module_3v3>; + vqmmc-supply = <®_DCDC3>; }; &iomuxc { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 &pinctrl_gpio4 - &pinctrl_gpio7 &pinctrl_usbc_det>; - - pinctrl_gpio1: gpio1-grp { - fsl,pins = < - MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16 0x14 /* SODIMM 77 */ - MX7D_PAD_EPDC_DATA09__GPIO2_IO9 0x14 /* SODIMM 89 */ - MX7D_PAD_EPDC_DATA08__GPIO2_IO8 0x74 /* SODIMM 91 */ - MX7D_PAD_LCD_RESET__GPIO3_IO4 0x14 /* SODIMM 93 */ - MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x14 /* SODIMM 95 */ - MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11 0x14 /* SODIMM 99 */ - MX7D_PAD_EPDC_DATA10__GPIO2_IO10 0x74 /* SODIMM 105 */ - MX7D_PAD_EPDC_DATA00__GPIO2_IO0 0x14 /* SODIMM 111 */ - MX7D_PAD_EPDC_DATA01__GPIO2_IO1 0x14 /* SODIMM 113 */ - MX7D_PAD_EPDC_DATA02__GPIO2_IO2 0x14 /* SODIMM 115 */ - MX7D_PAD_EPDC_DATA03__GPIO2_IO3 0x14 /* SODIMM 117 */ - MX7D_PAD_EPDC_DATA04__GPIO2_IO4 0x14 /* SODIMM 119 */ - MX7D_PAD_EPDC_DATA05__GPIO2_IO5 0x14 /* SODIMM 121 */ - MX7D_PAD_EPDC_DATA06__GPIO2_IO6 0x14 /* SODIMM 123 */ - MX7D_PAD_EPDC_DATA07__GPIO2_IO7 0x14 /* SODIMM 125 */ - MX7D_PAD_EPDC_SDCE2__GPIO2_IO22 0x14 /* SODIMM 127 */ - MX7D_PAD_UART3_RTS_B__GPIO4_IO6 0x14 /* SODIMM 131 */ - MX7D_PAD_EPDC_GDRL__GPIO2_IO26 0x14 /* SODIMM 133 */ - MX7D_PAD_SAI1_RX_DATA__GPIO6_IO12 0x14 /* SODIMM 169 */ - MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17 0x14 /* SODIMM 24 */ - MX7D_PAD_SD2_DATA2__GPIO5_IO16 0x14 /* SODIMM 100 */ - MX7D_PAD_SD2_DATA3__GPIO5_IO17 0x14 /* SODIMM 102 */ - MX7D_PAD_EPDC_GDSP__GPIO2_IO27 0x14 /* SODIMM 104 */ - MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x14 /* SODIMM 110 */ - MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30 0x14 /* SODIMM 112 */ - MX7D_PAD_EPDC_SDCLK__GPIO2_IO16 0x14 /* SODIMM 114 */ - MX7D_PAD_EPDC_SDLE__GPIO2_IO17 0x14 /* SODIMM 116 */ - MX7D_PAD_EPDC_SDOE__GPIO2_IO18 0x14 /* SODIMM 118 */ - MX7D_PAD_EPDC_SDSHR__GPIO2_IO19 0x14 /* SODIMM 120 */ - MX7D_PAD_EPDC_SDCE0__GPIO2_IO20 0x14 /* SODIMM 122 */ - MX7D_PAD_EPDC_SDCE1__GPIO2_IO21 0x14 /* SODIMM 124 */ - MX7D_PAD_EPDC_DATA14__GPIO2_IO14 0x14 /* SODIMM 126 */ - MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31 0x14 /* SODIMM 128 */ - MX7D_PAD_EPDC_SDCE3__GPIO2_IO23 0x14 /* SODIMM 130 */ - MX7D_PAD_EPDC_GDCLK__GPIO2_IO24 0x14 /* SODIMM 132 */ - MX7D_PAD_EPDC_GDOE__GPIO2_IO25 0x14 /* SODIMM 134 */ - MX7D_PAD_EPDC_DATA12__GPIO2_IO12 0x14 /* SODIMM 150 */ - MX7D_PAD_EPDC_DATA11__GPIO2_IO11 0x14 /* SODIMM 152 */ - MX7D_PAD_SD2_CLK__GPIO5_IO12 0x14 /* SODIMM 184 */ - MX7D_PAD_SD2_CMD__GPIO5_IO13 0x14 /* SODIMM 186 */ - >; - }; - - pinctrl_gpio2: gpio2-grp { /* On X22 Camera interface */ + pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 &pinctrl_gpio4>; + + /* + * Atmel MXT touchsceen + Capacitive Touch Adapter + * NOTE: This pin group conflicts with pin groups pinctrl_pwm2/pinctrl_pwm3. + * Don't use them simultaneously. + */ + pinctrl_atmel_adapter: atmelconnectorgrp { fsl,pins = < - MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x14 /* SODIMM 65 */ - MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x74 /* SODIMM 69 */ - MX7D_PAD_I2C4_SDA__GPIO4_IO15 0x14 /* SODIMM 75 */ - MX7D_PAD_ECSPI1_MISO__GPIO4_IO18 0x14 /* SODIMM 79 */ - MX7D_PAD_I2C3_SCL__GPIO4_IO12 0x14 /* SODIMM 81 */ - MX7D_PAD_ECSPI2_MISO__GPIO4_IO22 0x14 /* SODIMM 85 */ - MX7D_PAD_ECSPI1_SS0__GPIO4_IO19 0x14 /* SODIMM 97 */ - MX7D_PAD_ECSPI1_SCLK__GPIO4_IO16 0x14 /* SODIMM 101 */ - MX7D_PAD_ECSPI1_MOSI__GPIO4_IO17 0x14 /* SODIMM 103 */ - MX7D_PAD_I2C3_SDA__GPIO4_IO13 0x14 /* SODIMM 94 */ - MX7D_PAD_I2C4_SCL__GPIO4_IO14 0x14 /* SODIMM 96 */ - MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x14 /* SODIMM 98 */ + MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x74 /* SODIMM 28 / INT */ + MX7D_PAD_GPIO1_IO10__GPIO1_IO10 0x14 /* SODIMM 30 / RST */ >; }; - pinctrl_gpio3: gpio3-grp { /* LCD 18-23 */ + /* Atmel MXT touchsceen + boards with built-in Capacitive Touch Connector */ + pinctrl_atmel_connector: atmeladaptergrp { fsl,pins = < - MX7D_PAD_LCD_DATA18__GPIO3_IO23 0x14 /* SODIMM 136 */ - MX7D_PAD_LCD_DATA19__GPIO3_IO24 0x14 /* SODIMM 138 */ - MX7D_PAD_LCD_DATA20__GPIO3_IO25 0x14 /* SODIMM 140 */ - MX7D_PAD_LCD_DATA21__GPIO3_IO26 0x14 /* SODIMM 142 */ - MX7D_PAD_LCD_DATA22__GPIO3_IO27 0x74 /* SODIMM 144 */ - MX7D_PAD_LCD_DATA23__GPIO3_IO28 0x74 /* SODIMM 146 */ + MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x14 /* SODIMM 106 / RST */ + MX7D_PAD_EPDC_DATA15__GPIO2_IO15 0x74 /* SODIMM 107 / INT */ >; }; - pinctrl_gpio4: gpio4-grp { /* Alternatively CAN2 */ + pinctrl_can_int: canintgrp { fsl,pins = < - MX7D_PAD_GPIO1_IO15__GPIO1_IO15 0x14 /* SODIMM 178 */ - MX7D_PAD_GPIO1_IO14__GPIO1_IO14 0x14 /* SODIMM 188 */ + MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0X14 /* SODIMM 73 */ >; }; - pinctrl_gpio7: gpio7-grp { /* Alternatively CAN1 */ + pinctrl_ecspi3: ecspi3grp { fsl,pins = < - MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3 0x14 /* SODIMM 55 */ - MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2 0x14 /* SODIMM 63 */ + MX7D_PAD_I2C1_SCL__ECSPI3_MISO 0x2 /* SODIMM 90 */ + MX7D_PAD_I2C1_SDA__ECSPI3_MOSI 0x2 /* SODIMM 92 */ + MX7D_PAD_I2C2_SCL__ECSPI3_SCLK 0x2 /* SODIMM 88 */ >; }; - pinctrl_i2c1_int: i2c1-int-grp { /* PMIC / TOUCH */ + pinctrl_ecspi3_cs: ecspi3csgrp { fsl,pins = < - MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x79 - >; - }; - - pinctrl_can_int: can-int-grp { - fsl,pins = < - MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0X14 /* SODIMM 73 */ + MX7D_PAD_I2C2_SDA__GPIO4_IO11 0x14 /* SODIMM 86 */ >; }; pinctrl_enet1: enet1grp { fsl,pins = < - MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x73 MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x73 MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x73 MX7D_PAD_ENET1_RGMII_RXC__ENET1_RX_ER 0x73 - - MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x73 + MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x73 MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x73 MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x73 + MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x73 MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1 0x73 MX7D_PAD_SD2_CD_B__ENET1_MDIO 0x3 MX7D_PAD_SD2_WP__ENET1_MDC 0x3 >; }; - pinctrl_enet1_sleep: enet1sleepgrp { + pinctrl_enet1_sleep: enet1-sleepgrp { fsl,pins = < - MX7D_PAD_ENET1_RGMII_RX_CTL__GPIO7_IO4 0x0 MX7D_PAD_ENET1_RGMII_RD0__GPIO7_IO0 0x0 MX7D_PAD_ENET1_RGMII_RD1__GPIO7_IO1 0x0 MX7D_PAD_ENET1_RGMII_RXC__GPIO7_IO5 0x0 - - MX7D_PAD_ENET1_RGMII_TX_CTL__GPIO7_IO10 0x0 + MX7D_PAD_ENET1_RGMII_RX_CTL__GPIO7_IO4 0x0 MX7D_PAD_ENET1_RGMII_TD0__GPIO7_IO6 0x0 MX7D_PAD_ENET1_RGMII_TD1__GPIO7_IO7 0x0 + MX7D_PAD_ENET1_RGMII_TX_CTL__GPIO7_IO10 0x0 MX7D_PAD_GPIO1_IO12__GPIO1_IO12 0x0 MX7D_PAD_SD2_CD_B__GPIO5_IO9 0x0 MX7D_PAD_SD2_WP__GPIO5_IO10 0x0 >; }; - pinctrl_ecspi3_cs: ecspi3-cs-grp { + pinctrl_flexcan1: flexcan1grp { fsl,pins = < - MX7D_PAD_I2C2_SDA__GPIO4_IO11 0x14 + MX7D_PAD_ENET1_RGMII_RD2__FLEXCAN1_RX 0x79 /* SODIMM 63 */ + MX7D_PAD_ENET1_RGMII_RD3__FLEXCAN1_TX 0x79 /* SODIMM 55 */ >; }; - pinctrl_ecspi3: ecspi3-grp { + pinctrl_flexcan2: flexcan2grp { fsl,pins = < - MX7D_PAD_I2C1_SCL__ECSPI3_MISO 0x2 - MX7D_PAD_I2C1_SDA__ECSPI3_MOSI 0x2 - MX7D_PAD_I2C2_SCL__ECSPI3_SCLK 0x2 + MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x79 /* SODIMM 188 */ + MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x79 /* SODIMM 178 */ >; }; - pinctrl_flexcan1: flexcan1-grp { + pinctrl_gpio1: gpio1grp { fsl,pins = < - MX7D_PAD_ENET1_RGMII_RD3__FLEXCAN1_TX 0x79 /* SODIMM 55 */ - MX7D_PAD_ENET1_RGMII_RD2__FLEXCAN1_RX 0x79 /* SODIMM 63 */ + MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x14 /* SODIMM 110 */ + MX7D_PAD_EPDC_DATA00__GPIO2_IO0 0x14 /* SODIMM 111 */ + MX7D_PAD_EPDC_DATA01__GPIO2_IO1 0x14 /* SODIMM 113 */ + MX7D_PAD_EPDC_DATA02__GPIO2_IO2 0x14 /* SODIMM 115 */ + MX7D_PAD_EPDC_DATA03__GPIO2_IO3 0x14 /* SODIMM 117 */ + MX7D_PAD_EPDC_DATA04__GPIO2_IO4 0x14 /* SODIMM 119 */ + MX7D_PAD_EPDC_DATA05__GPIO2_IO5 0x14 /* SODIMM 121 */ + MX7D_PAD_EPDC_DATA06__GPIO2_IO6 0x14 /* SODIMM 123 */ + MX7D_PAD_EPDC_DATA07__GPIO2_IO7 0x14 /* SODIMM 125 */ + MX7D_PAD_EPDC_DATA08__GPIO2_IO8 0x74 /* SODIMM 91 */ + MX7D_PAD_EPDC_DATA09__GPIO2_IO9 0x14 /* SODIMM 89 */ + MX7D_PAD_EPDC_DATA10__GPIO2_IO10 0x74 /* SODIMM 105 */ + MX7D_PAD_EPDC_DATA11__GPIO2_IO11 0x14 /* SODIMM 152 */ + MX7D_PAD_EPDC_DATA12__GPIO2_IO12 0x14 /* SODIMM 150 */ + MX7D_PAD_EPDC_DATA14__GPIO2_IO14 0x14 /* SODIMM 126 */ + MX7D_PAD_EPDC_GDCLK__GPIO2_IO24 0x14 /* SODIMM 132 */ + MX7D_PAD_EPDC_GDOE__GPIO2_IO25 0x14 /* SODIMM 134 */ + MX7D_PAD_EPDC_GDRL__GPIO2_IO26 0x14 /* SODIMM 133 */ + MX7D_PAD_EPDC_GDSP__GPIO2_IO27 0x14 /* SODIMM 104 */ + MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30 0x14 /* SODIMM 112 */ + MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31 0x14 /* SODIMM 128 */ + MX7D_PAD_EPDC_SDCE0__GPIO2_IO20 0x14 /* SODIMM 122 */ + MX7D_PAD_EPDC_SDCE1__GPIO2_IO21 0x14 /* SODIMM 124 */ + MX7D_PAD_EPDC_SDCE2__GPIO2_IO22 0x14 /* SODIMM 127 */ + MX7D_PAD_EPDC_SDCE3__GPIO2_IO23 0x14 /* SODIMM 130 */ + MX7D_PAD_EPDC_SDCLK__GPIO2_IO16 0x14 /* SODIMM 114 */ + MX7D_PAD_EPDC_SDLE__GPIO2_IO17 0x14 /* SODIMM 116 */ + MX7D_PAD_EPDC_SDOE__GPIO2_IO18 0x14 /* SODIMM 118 */ + MX7D_PAD_EPDC_SDSHR__GPIO2_IO19 0x14 /* SODIMM 120 */ + MX7D_PAD_LCD_RESET__GPIO3_IO4 0x14 /* SODIMM 93 */ + MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17 0x14 /* SODIMM 24 */ + MX7D_PAD_SAI1_RX_DATA__GPIO6_IO12 0x14 /* SODIMM 169 */ + MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16 0x14 /* SODIMM 77 */ + MX7D_PAD_SD2_CLK__GPIO5_IO12 0x14 /* SODIMM 184 */ + MX7D_PAD_SD2_CMD__GPIO5_IO13 0x14 /* SODIMM 186 */ + MX7D_PAD_SD2_DATA2__GPIO5_IO16 0x14 /* SODIMM 100 */ + MX7D_PAD_SD2_DATA3__GPIO5_IO17 0x14 /* SODIMM 102 */ + MX7D_PAD_UART3_RTS_B__GPIO4_IO6 0x14 /* SODIMM 131 */ >; }; - pinctrl_flexcan2: flexcan2-grp { + pinctrl_gpio2: gpio2grp { /* On X22 Camera interface */ fsl,pins = < - MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x79 /* SODIMM 188 */ - MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x79 /* SODIMM 178 */ + MX7D_PAD_ECSPI1_MISO__GPIO4_IO18 0x14 /* SODIMM 79 */ + MX7D_PAD_ECSPI1_MOSI__GPIO4_IO17 0x14 /* SODIMM 103 */ + MX7D_PAD_ECSPI1_SCLK__GPIO4_IO16 0x14 /* SODIMM 101 */ + MX7D_PAD_ECSPI1_SS0__GPIO4_IO19 0x14 /* SODIMM 97 */ + MX7D_PAD_ECSPI2_MISO__GPIO4_IO22 0x14 /* SODIMM 85 */ + MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x14 /* SODIMM 65 */ + MX7D_PAD_I2C3_SCL__GPIO4_IO12 0x14 /* SODIMM 81 */ + MX7D_PAD_I2C3_SDA__GPIO4_IO13 0x14 /* SODIMM 94 */ + MX7D_PAD_I2C4_SCL__GPIO4_IO14 0x14 /* SODIMM 96 */ + MX7D_PAD_I2C4_SDA__GPIO4_IO15 0x14 /* SODIMM 75 */ + MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x74 /* SODIMM 69 */ + MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x14 /* SODIMM 98 */ + >; + }; + + pinctrl_gpio3: gpio3grp { /* LCD 18-23 */ + fsl,pins = < + MX7D_PAD_LCD_DATA18__GPIO3_IO23 0x14 /* SODIMM 136 */ + MX7D_PAD_LCD_DATA19__GPIO3_IO24 0x14 /* SODIMM 138 */ + MX7D_PAD_LCD_DATA20__GPIO3_IO25 0x14 /* SODIMM 140 */ + MX7D_PAD_LCD_DATA21__GPIO3_IO26 0x14 /* SODIMM 142 */ + MX7D_PAD_LCD_DATA22__GPIO3_IO27 0x74 /* SODIMM 144 */ + MX7D_PAD_LCD_DATA23__GPIO3_IO28 0x74 /* SODIMM 146 */ + >; + }; + + pinctrl_gpio4: gpio4grp { /* Alternatively CAN2 */ + fsl,pins = < + MX7D_PAD_GPIO1_IO14__GPIO1_IO14 0x14 /* SODIMM 188 */ + MX7D_PAD_GPIO1_IO15__GPIO1_IO15 0x14 /* SODIMM 178 */ + >; + }; + + pinctrl_gpio7: gpio7grp { /* Alternatively CAN1 */ + fsl,pins = < + MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2 0x14 /* SODIMM 63 */ + MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3 0x14 /* SODIMM 55 */ >; }; - pinctrl_gpio_bl_on: gpio-bl-on { + pinctrl_gpio_bl_on: gpioblongrp { fsl,pins = < MX7D_PAD_SD1_WP__GPIO5_IO1 0x14 /* SODIMM 71 */ >; }; - pinctrl_gpmi_nand: gpmi-nand-grp { + pinctrl_gpmi_nand: gpminandgrp { fsl,pins = < - MX7D_PAD_SD3_CLK__NAND_CLE 0x71 - MX7D_PAD_SD3_CMD__NAND_ALE 0x71 MX7D_PAD_SAI1_TX_BCLK__NAND_CE0_B 0x71 MX7D_PAD_SAI1_TX_DATA__NAND_READY_B 0x74 - MX7D_PAD_SD3_STROBE__NAND_RE_B 0x71 - MX7D_PAD_SD3_RESET_B__NAND_WE_B 0x71 + MX7D_PAD_SD3_CLK__NAND_CLE 0x71 + MX7D_PAD_SD3_CMD__NAND_ALE 0x71 MX7D_PAD_SD3_DATA0__NAND_DATA00 0x71 MX7D_PAD_SD3_DATA1__NAND_DATA01 0x71 MX7D_PAD_SD3_DATA2__NAND_DATA02 0x71 @@ -669,13 +836,21 @@ MX7D_PAD_SD3_DATA5__NAND_DATA05 0x71 MX7D_PAD_SD3_DATA6__NAND_DATA06 0x71 MX7D_PAD_SD3_DATA7__NAND_DATA07 0x71 + MX7D_PAD_SD3_RESET_B__NAND_WE_B 0x71 + MX7D_PAD_SD3_STROBE__NAND_RE_B 0x71 >; }; - pinctrl_i2c4: i2c4-grp { + pinctrl_i2c1_int: i2c1intgrp { /* PMIC / TOUCH */ fsl,pins = < - MX7D_PAD_ENET1_RGMII_TD3__I2C4_SDA 0x4000007f - MX7D_PAD_ENET1_RGMII_TD2__I2C4_SCL 0x4000007f + MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x79 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX7D_PAD_ENET1_RGMII_TD2__I2C4_SCL 0x4000007f /* SODIMM 196 */ + MX7D_PAD_ENET1_RGMII_TD3__I2C4_SDA 0x4000007f /* SODIMM 194 */ >; }; @@ -686,155 +861,176 @@ >; }; - pinctrl_lcdif_dat: lcdif-dat-grp { + pinctrl_lcdif_dat: lcdifdatgrp { + fsl,pins = < + MX7D_PAD_LCD_DATA00__LCD_DATA0 0x79 /* SODIMM 76 */ + MX7D_PAD_LCD_DATA01__LCD_DATA1 0x79 /* SODIMM 70 */ + MX7D_PAD_LCD_DATA02__LCD_DATA2 0x79 /* SODIMM 60 */ + MX7D_PAD_LCD_DATA03__LCD_DATA3 0x79 /* SODIMM 58 */ + MX7D_PAD_LCD_DATA04__LCD_DATA4 0x79 /* SODIMM 78 */ + MX7D_PAD_LCD_DATA05__LCD_DATA5 0x79 /* SODIMM 72 */ + MX7D_PAD_LCD_DATA06__LCD_DATA6 0x79 /* SODIMM 80 */ + MX7D_PAD_LCD_DATA07__LCD_DATA7 0x79 /* SODIMM 46 */ + MX7D_PAD_LCD_DATA08__LCD_DATA8 0x79 /* SODIMM 62 */ + MX7D_PAD_LCD_DATA09__LCD_DATA9 0x79 /* SODIMM 48 */ + MX7D_PAD_LCD_DATA10__LCD_DATA10 0x79 /* SODIMM 74 */ + MX7D_PAD_LCD_DATA11__LCD_DATA11 0x79 /* SODIMM 50 */ + MX7D_PAD_LCD_DATA12__LCD_DATA12 0x79 /* SODIMM 52 */ + MX7D_PAD_LCD_DATA13__LCD_DATA13 0x79 /* SODIMM 54 */ + MX7D_PAD_LCD_DATA14__LCD_DATA14 0x79 /* SODIMM 66 */ + MX7D_PAD_LCD_DATA15__LCD_DATA15 0x79 /* SODIMM 64 */ + MX7D_PAD_LCD_DATA16__LCD_DATA16 0x79 /* SODIMM 57 */ + MX7D_PAD_LCD_DATA17__LCD_DATA17 0x79 /* SODIMM 61 */ + >; + }; + + pinctrl_lcdif_dat_24: lcdifdat24grp { fsl,pins = < - MX7D_PAD_LCD_DATA00__LCD_DATA0 0x79 - MX7D_PAD_LCD_DATA01__LCD_DATA1 0x79 - MX7D_PAD_LCD_DATA02__LCD_DATA2 0x79 - MX7D_PAD_LCD_DATA03__LCD_DATA3 0x79 - MX7D_PAD_LCD_DATA04__LCD_DATA4 0x79 - MX7D_PAD_LCD_DATA05__LCD_DATA5 0x79 - MX7D_PAD_LCD_DATA06__LCD_DATA6 0x79 - MX7D_PAD_LCD_DATA07__LCD_DATA7 0x79 - MX7D_PAD_LCD_DATA08__LCD_DATA8 0x79 - MX7D_PAD_LCD_DATA09__LCD_DATA9 0x79 - MX7D_PAD_LCD_DATA10__LCD_DATA10 0x79 - MX7D_PAD_LCD_DATA11__LCD_DATA11 0x79 - MX7D_PAD_LCD_DATA12__LCD_DATA12 0x79 - MX7D_PAD_LCD_DATA13__LCD_DATA13 0x79 - MX7D_PAD_LCD_DATA14__LCD_DATA14 0x79 - MX7D_PAD_LCD_DATA15__LCD_DATA15 0x79 - MX7D_PAD_LCD_DATA16__LCD_DATA16 0x79 - MX7D_PAD_LCD_DATA17__LCD_DATA17 0x79 + MX7D_PAD_LCD_DATA18__LCD_DATA18 0x79 /* SODIMM 136 */ + MX7D_PAD_LCD_DATA19__LCD_DATA19 0x79 /* SODIMM 138 */ + MX7D_PAD_LCD_DATA20__LCD_DATA20 0x79 /* SODIMM 140 */ + MX7D_PAD_LCD_DATA21__LCD_DATA21 0x79 /* SODIMM 142 */ + MX7D_PAD_LCD_DATA22__LCD_DATA22 0x79 /* SODIMM 144 */ + MX7D_PAD_LCD_DATA23__LCD_DATA23 0x79 /* SODIMM 146 */ >; }; - pinctrl_lcdif_dat_24: lcdif-dat-24-grp { + pinctrl_lcdif_ctrl: lcdifctrlgrp { fsl,pins = < - MX7D_PAD_LCD_DATA18__LCD_DATA18 0x79 - MX7D_PAD_LCD_DATA19__LCD_DATA19 0x79 - MX7D_PAD_LCD_DATA20__LCD_DATA20 0x79 - MX7D_PAD_LCD_DATA21__LCD_DATA21 0x79 - MX7D_PAD_LCD_DATA22__LCD_DATA22 0x79 - MX7D_PAD_LCD_DATA23__LCD_DATA23 0x79 + MX7D_PAD_LCD_CLK__LCD_CLK 0x79 /* SODIMM 56 */ + MX7D_PAD_LCD_ENABLE__LCD_ENABLE 0x79 /* SODIMM 44 */ + MX7D_PAD_LCD_HSYNC__LCD_HSYNC 0x79 /* SODIMM 68 */ + MX7D_PAD_LCD_VSYNC__LCD_VSYNC 0x79 /* SODIMM 82 */ >; }; - pinctrl_lcdif_ctrl: lcdif-ctrl-grp { + pinctrl_lvds_transceiver: lvdstx { fsl,pins = < - MX7D_PAD_LCD_CLK__LCD_CLK 0x79 - MX7D_PAD_LCD_ENABLE__LCD_ENABLE 0x79 - MX7D_PAD_LCD_VSYNC__LCD_VSYNC 0x79 - MX7D_PAD_LCD_HSYNC__LCD_HSYNC 0x79 + MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2 0x14 /* SODIMM 63 */ + MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3 0x74 /* SODIMM 55 */ + MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11 0x14 /* SODIMM 99 */ + MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x14 /* SODIMM 95 */ >; }; - pinctrl_pwm1: pwm1-grp { + pinctrl_pwm1: pwm1grp { fsl,pins = < - MX7D_PAD_GPIO1_IO08__PWM1_OUT 0x79 - MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21 0x4 + MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21 0x4 /* SODIMM 59 */ + MX7D_PAD_GPIO1_IO08__PWM1_OUT 0x79 /* SODIMM 59 */ >; }; - pinctrl_pwm2: pwm2-grp { + pinctrl_pwm2: pwm2grp { fsl,pins = < - MX7D_PAD_GPIO1_IO09__PWM2_OUT 0x79 + MX7D_PAD_GPIO1_IO09__PWM2_OUT 0x79 /* SODIMM 28 */ >; }; - pinctrl_pwm3: pwm3-grp { + pinctrl_pwm3: pwm3grp { fsl,pins = < - MX7D_PAD_GPIO1_IO10__PWM3_OUT 0x79 + MX7D_PAD_GPIO1_IO10__PWM3_OUT 0x79 /* SODIMM 30 */ >; }; - pinctrl_pwm4: pwm4-grp { + pinctrl_pwm4: pwm4grp { fsl,pins = < - MX7D_PAD_GPIO1_IO11__PWM4_OUT 0x79 - MX7D_PAD_ECSPI2_SCLK__GPIO4_IO20 0x4 + MX7D_PAD_ECSPI2_SCLK__GPIO4_IO20 0x4 /* SODIMM 67 */ + MX7D_PAD_GPIO1_IO11__PWM4_OUT 0x79 /* SODIMM 67 */ >; }; - pinctrl_uart1: uart1-grp { + pinctrl_uart1: uart1grp { fsl,pins = < - MX7D_PAD_UART1_TX_DATA__UART1_DTE_RX 0x79 - MX7D_PAD_UART1_RX_DATA__UART1_DTE_TX 0x79 - MX7D_PAD_SAI2_TX_BCLK__UART1_DTE_CTS 0x79 - MX7D_PAD_SAI2_TX_SYNC__UART1_DTE_RTS 0x79 + MX7D_PAD_SAI2_TX_BCLK__UART1_DTE_CTS 0x79 /* SODIMM 25 */ + MX7D_PAD_SAI2_TX_SYNC__UART1_DTE_RTS 0x79 /* SODIMM 27 */ + MX7D_PAD_UART1_RX_DATA__UART1_DTE_TX 0x79 /* SODIMM 35 */ + MX7D_PAD_UART1_TX_DATA__UART1_DTE_RX 0x79 /* SODIMM 33 */ >; }; - pinctrl_uart1_ctrl1: uart1-ctrl1-grp { + pinctrl_uart1_ctrl1: uart1ctrl1grp { fsl,pins = < - MX7D_PAD_SD2_DATA1__GPIO5_IO15 0x14 /* DCD */ - MX7D_PAD_SD2_DATA0__GPIO5_IO14 0x14 /* DTR */ + MX7D_PAD_SD2_DATA0__GPIO5_IO14 0x14 /* SODIMM 23 / DTR */ + MX7D_PAD_SD2_DATA1__GPIO5_IO15 0x14 /* SODIMM 31 / DCD */ >; }; - pinctrl_uart2: uart2-grp { + pinctrl_uart2: uart2grp { + fsl,pins = < + MX7D_PAD_SAI2_RX_DATA__UART2_DTE_RTS 0x79 /* SODIMM 32 / CTS */ + MX7D_PAD_SAI2_TX_DATA__UART2_DTE_CTS 0x79 /* SODIMM 34 / RTS */ + MX7D_PAD_UART2_RX_DATA__UART2_DTE_TX 0x79 /* SODIMM 38 */ + MX7D_PAD_UART2_TX_DATA__UART2_DTE_RX 0x79 /* SODIMM 36 */ + >; + }; + pinctrl_uart3: uart3grp { fsl,pins = < - MX7D_PAD_UART2_TX_DATA__UART2_DTE_RX 0x79 - MX7D_PAD_UART2_RX_DATA__UART2_DTE_TX 0x79 - MX7D_PAD_SAI2_RX_DATA__UART2_DTE_RTS 0x79 - MX7D_PAD_SAI2_TX_DATA__UART2_DTE_CTS 0x79 + MX7D_PAD_UART3_RX_DATA__UART3_DTE_TX 0x79 /* SODIMM 21 */ + MX7D_PAD_UART3_TX_DATA__UART3_DTE_RX 0x79 /* SODIMM 19 */ >; }; - pinctrl_uart3: uart3-grp { + + pinctrl_usbc_det: usbcdetgrp { fsl,pins = < - MX7D_PAD_UART3_TX_DATA__UART3_DTE_RX 0x79 - MX7D_PAD_UART3_RX_DATA__UART3_DTE_TX 0x79 + MX7D_PAD_ENET1_CRS__GPIO7_IO14 0x14 /* SODIMM 137 / USBC_DET */ >; }; - pinctrl_usbc_det: gpio-usbc-det { + pinctrl_usbh_reg: usbhreggrp { fsl,pins = < - MX7D_PAD_ENET1_CRS__GPIO7_IO14 0x14 + MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14 /* SODIMM 129 / USBH_PEN */ >; }; - pinctrl_usbh_reg: gpio-usbh-vbus { + pinctrl_usdhc1: usdhc1grp { fsl,pins = < - MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14 /* SODIMM 129 USBH PEN */ + MX7D_PAD_SD1_CLK__SD1_CLK 0x19 /* SODIMM 47 */ + MX7D_PAD_SD1_CMD__SD1_CMD 0x59 /* SODIMM 190 */ + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59 /* SODIMM 192 */ + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59 /* SODIMM 49 */ + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59 /* SODIMM 51 */ + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59 /* SODIMM 53 */ >; }; - pinctrl_usdhc1: usdhc1-grp { + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { fsl,pins = < - MX7D_PAD_SD1_CMD__SD1_CMD 0x59 - MX7D_PAD_SD1_CLK__SD1_CLK 0x19 - MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59 - MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59 - MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59 - MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59 + MX7D_PAD_SD1_CLK__SD1_CLK 0x1a + MX7D_PAD_SD1_CMD__SD1_CMD 0x5a + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5a + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5a + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5a + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5a >; }; - pinctrl_usdhc1_100mhz: usdhc1grp_100mhz { + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { fsl,pins = < - MX7D_PAD_SD1_CMD__SD1_CMD 0x5a - MX7D_PAD_SD1_CLK__SD1_CLK 0x1a - MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5a - MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5a - MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5a - MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5a + MX7D_PAD_SD1_CLK__SD1_CLK 0x1b + MX7D_PAD_SD1_CMD__SD1_CMD 0x5b + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5b + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5b + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5b + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5b >; }; - pinctrl_usdhc1_200mhz: usdhc1grp_200mhz { + /* Avoid backfeeding with removed card power. */ + pinctrl_usdhc1_sleep: usdhc1-slpgrp { fsl,pins = < - MX7D_PAD_SD1_CMD__SD1_CMD 0x5b - MX7D_PAD_SD1_CLK__SD1_CLK 0x1b - MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5b - MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5b - MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5b - MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5b + MX7D_PAD_SD1_CMD__SD1_CMD 0x10 + MX7D_PAD_SD1_CLK__SD1_CLK 0x10 + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x10 + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x10 + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x10 + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x10 >; }; pinctrl_usdhc3: usdhc3grp { fsl,pins = < - MX7D_PAD_SD3_CMD__SD3_CMD 0x59 MX7D_PAD_SD3_CLK__SD3_CLK 0x19 + MX7D_PAD_SD3_CMD__SD3_CMD 0x59 MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59 MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59 MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59 @@ -847,10 +1043,10 @@ >; }; - pinctrl_usdhc3_100mhz: usdhc3grp_100mhz { + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { fsl,pins = < - MX7D_PAD_SD3_CMD__SD3_CMD 0x5a MX7D_PAD_SD3_CLK__SD3_CLK 0x1a + MX7D_PAD_SD3_CMD__SD3_CMD 0x5a MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5a MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5a MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5a @@ -863,10 +1059,10 @@ >; }; - pinctrl_usdhc3_200mhz: usdhc3grp_200mhz { + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { fsl,pins = < - MX7D_PAD_SD3_CMD__SD3_CMD 0x5b MX7D_PAD_SD3_CLK__SD3_CLK 0x1b + MX7D_PAD_SD3_CMD__SD3_CMD 0x5b MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5b MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5b MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5b @@ -879,16 +1075,16 @@ >; }; - pinctrl_sai1: sai1-grp { + pinctrl_sai1: sai1grp { fsl,pins = < - MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x1f - MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC 0x1f MX7D_PAD_ENET1_COL__SAI1_TX_DATA0 0x30 + MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x1f MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0 0x1f + MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC 0x1f >; }; - pinctrl_sai1_mclk: sai1grp_mclk { + pinctrl_sai1_mclk: sai1mclkgrp { fsl,pins = < MX7D_PAD_SAI1_MCLK__SAI1_MCLK 0x1f >; @@ -899,23 +1095,35 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_lpsr>; - pinctrl_gpio_lpsr: gpio1-grp { + pinctrl_cd_usdhc1: cdusdhc1grp { fsl,pins = < - MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2 0x59 - MX7D_PAD_LPSR_GPIO1_IO03__GPIO1_IO3 0x59 + MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0 0x59 /* SODIMM 43 / MMC_CD */ + >; + }; + + pinctrl_cd_usdhc1_sleep: cdusdhc1-slpgrp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0 0x0 + >; + }; + + pinctrl_gpio_lpsr: gpiolpsrgrp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2 0x59 /* SODIMM 135 */ + MX7D_PAD_LPSR_GPIO1_IO03__GPIO1_IO3 0x59 /* SODIMM 22 */ >; }; pinctrl_gpiokeys: gpiokeysgrp { fsl,pins = < - MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1 0x19 + MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1 0x19 /* SODIMM 45 / WAKE_UP */ >; }; - pinctrl_i2c1: i2c1-grp { + pinctrl_i2c1: i2c1grp { fsl,pins = < - MX7D_PAD_LPSR_GPIO1_IO05__I2C1_SDA 0x4000007f MX7D_PAD_LPSR_GPIO1_IO04__I2C1_SCL 0x4000007f + MX7D_PAD_LPSR_GPIO1_IO05__I2C1_SDA 0x4000007f >; }; @@ -926,16 +1134,10 @@ >; }; - pinctrl_cd_usdhc1: usdhc1-cd-grp { - fsl,pins = < - MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0 0x59 /* CD */ - >; - }; - - pinctrl_uart1_ctrl2: uart1-ctrl2-grp { + pinctrl_uart1_ctrl2: uart1ctrl2grp { fsl,pins = < - MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x14 /* DSR */ - MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6 0x14 /* RI */ + MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6 0x14 /* SODIMM 37 / RI */ + MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x14 /* SODIMM 29 / DSR */ >; }; }; diff --git a/dts/src/arm/imx7d-colibri-aster.dts b/dts/src/arm/imx7d-colibri-aster.dts index f3f0537d5a..90aaeddfb4 100644 --- a/dts/src/arm/imx7d-colibri-aster.dts +++ b/dts/src/arm/imx7d-colibri-aster.dts @@ -1,7 +1,6 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2017-2020 Toradex AG - * + * Copyright 2017-2022 Toradex */ /dts-v1/; @@ -10,11 +9,32 @@ / { model = "Toradex Colibri iMX7D on Aster Carrier Board"; - compatible = "toradex,colibri-imx7d-aster", "toradex,colibri-imx7d", + compatible = "toradex,colibri-imx7d-aster", + "toradex,colibri-imx7d", "fsl,imx7d"; }; +&ad7879_ts { + status = "okay"; +}; + +&atmel_mxt_ts { + status = "okay"; +}; + +&backlight { + status = "okay"; +}; + +&lcdif { + status = "okay"; +}; + +&panel_dpi { + status = "okay"; +}; + +/* Colibri USBH */ &usbotg2 { - vbus-supply = <®_usbh_vbus>; status = "okay"; }; diff --git a/dts/src/arm/imx7d-colibri-emmc-aster.dts b/dts/src/arm/imx7d-colibri-emmc-aster.dts index 20480276cb..3ec9ef6baa 100644 --- a/dts/src/arm/imx7d-colibri-emmc-aster.dts +++ b/dts/src/arm/imx7d-colibri-emmc-aster.dts @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2017-2020 Toradex AG + * Copyright 2017-2022 Toradex * */ @@ -11,10 +11,12 @@ / { model = "Toradex Colibri iMX7D 1GB (eMMC) on Aster Carrier Board"; compatible = "toradex,colibri-imx7d-emmc-aster", - "toradex,colibri-imx7d-emmc", "fsl,imx7d"; + "toradex,colibri-imx7d-emmc", + "toradex,colibri-imx7d", + "fsl,imx7d"; }; +/* Colibri USBH */ &usbotg2 { - vbus-supply = <®_usbh_vbus>; status = "okay"; }; diff --git a/dts/src/arm/imx7d-colibri-emmc-eval-v3.dts b/dts/src/arm/imx7d-colibri-emmc-eval-v3.dts index 8ee73c870b..6d505cb02a 100644 --- a/dts/src/arm/imx7d-colibri-emmc-eval-v3.dts +++ b/dts/src/arm/imx7d-colibri-emmc-eval-v3.dts @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2017 Toradex AG + * Copyright 2017-2022 Toradex */ /dts-v1/; @@ -10,10 +10,12 @@ / { model = "Toradex Colibri iMX7D 1GB (eMMC) on Colibri Evaluation Board V3"; compatible = "toradex,colibri-imx7d-emmc-eval-v3", - "toradex,colibri-imx7d-emmc", "fsl,imx7d"; + "toradex,colibri-imx7d-emmc", + "toradex,colibri-imx7d", + "fsl,imx7d"; }; +/* Colibri USBH */ &usbotg2 { - vbus-supply = <®_usbh_vbus>; status = "okay"; }; diff --git a/dts/src/arm/imx7d-colibri-emmc-iris-v2.dts b/dts/src/arm/imx7d-colibri-emmc-iris-v2.dts new file mode 100644 index 0000000000..7347659557 --- /dev/null +++ b/dts/src/arm/imx7d-colibri-emmc-iris-v2.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; +#include "imx7d-colibri-emmc.dtsi" +#include "imx7-colibri-iris-v2.dtsi" + +/ { + model = "Toradex Colibri iMX7D 1GB on Iris V2 Carrier Board"; + compatible = "toradex,colibri-imx7d-emmc-iris-v2", + "toradex,colibri-imx7d-emmc", + "toradex,colibri-imx7d", + "fsl,imx7d"; +}; + +/* Colibri USBH */ +&usbotg2 { + status = "okay"; +}; diff --git a/dts/src/arm/imx7d-colibri-emmc-iris.dts b/dts/src/arm/imx7d-colibri-emmc-iris.dts new file mode 100644 index 0000000000..5324c92e36 --- /dev/null +++ b/dts/src/arm/imx7d-colibri-emmc-iris.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; +#include "imx7d-colibri-emmc.dtsi" +#include "imx7-colibri-iris.dtsi" + +/ { + model = "Toradex Colibri iMX7D 1GB on Iris Carrier Board"; + compatible = "toradex,colibri-imx7d-emmc-iris", + "toradex,colibri-imx7d-emmc", + "toradex,colibri-imx7d", + "fsl,imx7d"; +}; + +/* Colibri USBH */ +&usbotg2 { + status = "okay"; +}; diff --git a/dts/src/arm/imx7d-colibri-emmc.dtsi b/dts/src/arm/imx7d-colibri-emmc.dtsi index af39e5370f..2fb4d2133a 100644 --- a/dts/src/arm/imx7d-colibri-emmc.dtsi +++ b/dts/src/arm/imx7d-colibri-emmc.dtsi @@ -1,18 +1,28 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2017 Toradex AG + * Copyright 2017-2022 Toradex */ #include "imx7d.dtsi" #include "imx7-colibri.dtsi" / { + aliases { + /* Required to properly pass MAC addresses from bootloader. */ + ethernet0 = &fec1; + ethernet1 = &fec2; + }; + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x40000000>; }; }; +&cpu1 { + cpu-supply = <®_DCDC2>; +}; + &gpio6 { gpio-line-names = "", "", @@ -39,10 +49,13 @@ "SODIMM_34"; }; +/* Colibri USBH */ &usbotg2 { dr_mode = "host"; + vbus-supply = <®_usbh_vbus>; }; +/* eMMC */ &usdhc3 { status = "okay"; }; diff --git a/dts/src/arm/imx7d-colibri-eval-v3.dts b/dts/src/arm/imx7d-colibri-eval-v3.dts index 87b132bcd2..c7a8b5aa24 100644 --- a/dts/src/arm/imx7d-colibri-eval-v3.dts +++ b/dts/src/arm/imx7d-colibri-eval-v3.dts @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2016-2020 Toradex + * Copyright 2016-2022 Toradex */ /dts-v1/; @@ -9,11 +9,48 @@ / { model = "Toradex Colibri iMX7D on Colibri Evaluation Board V3"; - compatible = "toradex,colibri-imx7d-eval-v3", "toradex,colibri-imx7d", + compatible = "toradex,colibri-imx7d-eval-v3", + "toradex,colibri-imx7d", "fsl,imx7d"; }; +&ad7879_ts { + status = "okay"; +}; + +/* + * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3. + * So if you enable following capacitive touch controller, disable pwm2/pwm3 first. + */ +&atmel_mxt_ts { + status = "disabled"; +}; + +&backlight { + status = "okay"; +}; + +&lcdif { + status = "okay"; +}; + +&panel_dpi { + status = "okay"; +}; + +/* Colibri PWM<B> */ +&pwm2 { + /* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */ + status = "okay"; +}; + +/* Colibri PWM<C> */ +&pwm3 { + /* The pwm3 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */ + status = "okay"; +}; + +/* Colibri USBH */ &usbotg2 { - vbus-supply = <®_usbh_vbus>; status = "okay"; }; diff --git a/dts/src/arm/imx7d-colibri-iris-v2.dts b/dts/src/arm/imx7d-colibri-iris-v2.dts new file mode 100644 index 0000000000..5762f51d5f --- /dev/null +++ b/dts/src/arm/imx7d-colibri-iris-v2.dts @@ -0,0 +1,83 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; +#include "imx7d-colibri.dtsi" +#include "imx7-colibri-iris-v2.dtsi" + +/ { + model = "Toradex Colibri iMX7D on Iris V2 Carrier Board"; + compatible = "toradex,colibri-imx7d-iris-v2", + "toradex,colibri-imx7d", + "fsl,imx7d"; +}; + +&ad7879_ts { + status = "okay"; +}; + +&atmel_mxt_ts { + status = "okay"; +}; + +&backlight { + status = "okay"; +}; + +&gpio2 { + /* + * This switches the LVDS transceiver to VESA color mapping mode. + */ + lvds-color-map-hog { + gpio-hog; + gpios = <13 GPIO_ACTIVE_HIGH>; /* SODIMM 95 */ + line-name = "LVDS_COLOR_MAP"; + output-low; + }; +}; + +&gpio7 { + /* + * This switches the LVDS transceiver to the 24-bit RGB mode. + */ + lvds-rgb-mode-hog { + gpio-hog; + gpios = <2 GPIO_ACTIVE_HIGH>; /* SODIMM 63 */ + line-name = "LVDS_RGB_MODE"; + output-low; + }; + + /* + * This switches the LVDS transceiver to the single-channel + * output mode. + */ + lvds-ch-mode-hog { + gpio-hog; + gpios = <3 GPIO_ACTIVE_HIGH>; /* SODIMM 55 */ + line-name = "LVDS_CH_MODE"; + output-high; + }; + + /* This turns the LVDS transceiver on */ + lvds-power-on-hog { + gpio-hog; + gpios = <11 GPIO_ACTIVE_HIGH>; /* SODIMM 99 */ + line-name = "LVDS_POWER_ON"; + output-high; + }; +}; + +&lcdif { + status = "okay"; +}; + +&panel_dpi { + status = "okay"; +}; + +/* Colibri USBH */ +&usbotg2 { + status = "okay"; +}; diff --git a/dts/src/arm/imx7d-colibri-iris.dts b/dts/src/arm/imx7d-colibri-iris.dts new file mode 100644 index 0000000000..9c63cb9d9a --- /dev/null +++ b/dts/src/arm/imx7d-colibri-iris.dts @@ -0,0 +1,56 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; +#include "imx7d-colibri.dtsi" +#include "imx7-colibri-iris.dtsi" + +/ { + model = "Toradex Colibri iMX7D on Iris Carrier Board"; + compatible = "toradex,colibri-imx7d-iris", + "toradex,colibri-imx7d", + "fsl,imx7d"; +}; + +&ad7879_ts { + status = "okay"; +}; + +/* + * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3. + * So if you enable following capacitive touch controller, disable pwm2/pwm3 first. + */ +&atmel_mxt_ts { + status = "disabled"; +}; + +&backlight { + status = "okay"; +}; + +&lcdif { + status = "okay"; +}; + +&panel_dpi { + status = "okay"; +}; + +/* Colibri PWM<B> */ +&pwm2 { + /* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */ + status = "okay"; +}; + +/* Colibri PWM<C> */ +&pwm3 { + /* The pwm3 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */ + status = "okay"; +}; + +/* Colibri USBH */ +&usbotg2 { + status = "okay"; +}; diff --git a/dts/src/arm/imx7d-colibri.dtsi b/dts/src/arm/imx7d-colibri.dtsi index 219a0404a0..531a45b176 100644 --- a/dts/src/arm/imx7d-colibri.dtsi +++ b/dts/src/arm/imx7d-colibri.dtsi @@ -1,12 +1,18 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2016-2020 Toradex + * Copyright 2016-2022 Toradex */ #include "imx7d.dtsi" #include "imx7-colibri.dtsi" / { + aliases { + /* Required to properly pass MAC addresses from bootloader. */ + ethernet0 = &fec1; + ethernet1 = &fec2; + }; + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x20000000>; @@ -17,10 +23,13 @@ cpu-supply = <®_DCDC2>; }; +/* NAND */ &gpmi { status = "okay"; }; +/* Colibri USBH */ &usbotg2 { dr_mode = "host"; + vbus-supply = <®_usbh_vbus>; }; diff --git a/dts/src/arm/imx7d-sdb.dts b/dts/src/arm/imx7d-sdb.dts index f053f51227..78f4224a9b 100644 --- a/dts/src/arm/imx7d-sdb.dts +++ b/dts/src/arm/imx7d-sdb.dts @@ -201,7 +201,7 @@ compatible = "ti,tsc2046"; reg = <0>; spi-max-frequency = <1000000>; - pinctrl-names ="default"; + pinctrl-names = "default"; pinctrl-0 = <&pinctrl_tsc2046_pendown>; interrupt-parent = <&gpio2>; interrupts = <29 0>; diff --git a/dts/src/arm/imx7d-smegw01.dts b/dts/src/arm/imx7d-smegw01.dts index 21b509c433..546268b8d0 100644 --- a/dts/src/arm/imx7d-smegw01.dts +++ b/dts/src/arm/imx7d-smegw01.dts @@ -207,7 +207,7 @@ pinctrl-0 = <&pinctrl_usdhc1>; cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; no-1-8-v; - enable-sdio-wakeup; + wakeup-source; keep-power-in-suspend; status = "okay"; }; @@ -219,7 +219,7 @@ no-1-8-v; non-removable; vmmc-supply = <®_wifi>; - enable-sdio-wakeup; + wakeup-source; status = "okay"; }; diff --git a/dts/src/arm/imx7d.dtsi b/dts/src/arm/imx7d.dtsi index f8cba47536..7ceb7c09f7 100644 --- a/dts/src/arm/imx7d.dtsi +++ b/dts/src/arm/imx7d.dtsi @@ -78,7 +78,7 @@ #phy-cells = <0>; }; - soc { + soc: soc { etm@3007d000 { compatible = "arm,coresight-etm3x", "arm,primecell"; reg = <0x3007d000 0x1000>; diff --git a/dts/src/arm/imx7s-colibri-aster.dts b/dts/src/arm/imx7s-colibri-aster.dts index fca4e0a95c..58ebb02d94 100644 --- a/dts/src/arm/imx7s-colibri-aster.dts +++ b/dts/src/arm/imx7s-colibri-aster.dts @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2017-2020 Toradex AG + * Copyright 2017-2022 Toradex * */ @@ -10,6 +10,27 @@ / { model = "Toradex Colibri iMX7S on Aster Carrier Board"; - compatible = "toradex,colibri-imx7s-aster", "toradex,colibri-imx7s", + compatible = "toradex,colibri-imx7s-aster", + "toradex,colibri-imx7s", "fsl,imx7s"; }; + +&ad7879_ts { + status = "okay"; +}; + +&atmel_mxt_ts { + status = "okay"; +}; + +&backlight { + status = "okay"; +}; + +&lcdif { + status = "okay"; +}; + +&panel_dpi { + status = "okay"; +}; diff --git a/dts/src/arm/imx7s-colibri-eval-v3.dts b/dts/src/arm/imx7s-colibri-eval-v3.dts index aa70d3f2e2..38de76630d 100644 --- a/dts/src/arm/imx7s-colibri-eval-v3.dts +++ b/dts/src/arm/imx7s-colibri-eval-v3.dts @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2016-2020 Toradex + * Copyright 2016-2022 Toradex */ /dts-v1/; @@ -9,6 +9,43 @@ / { model = "Toradex Colibri iMX7S on Colibri Evaluation Board V3"; - compatible = "toradex,colibri-imx7s-eval-v3", "toradex,colibri-imx7s", + compatible = "toradex,colibri-imx7s-eval-v3", + "toradex,colibri-imx7s", "fsl,imx7s"; }; + +&ad7879_ts { + status = "okay"; +}; + +/* + * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3. + * So if you enable following capacitive touch controller, disable pwm2/pwm3 first. + */ +&atmel_mxt_ts { + status = "disabled"; +}; + +&backlight { + status = "okay"; +}; + +&lcdif { + status = "okay"; +}; + +&panel_dpi { + status = "okay"; +}; + +/* Colibri PWM<B> */ +&pwm2 { + /* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */ + status = "okay"; +}; + +/* Colibri PWM<C> */ +&pwm3 { + /* The pwm3 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */ + status = "okay"; +}; diff --git a/dts/src/arm/imx7s-colibri-iris-v2.dts b/dts/src/arm/imx7s-colibri-iris-v2.dts new file mode 100644 index 0000000000..72b5c17ab1 --- /dev/null +++ b/dts/src/arm/imx7s-colibri-iris-v2.dts @@ -0,0 +1,78 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; +#include "imx7s-colibri.dtsi" +#include "imx7-colibri-iris-v2.dtsi" + +/ { + model = "Toradex Colibri iMX7S on Iris V2 Carrier Board"; + compatible = "toradex,colibri-imx7s-iris-v2", + "toradex,colibri-imx7s", + "fsl,imx7s"; +}; + +&ad7879_ts { + status = "okay"; +}; + +&atmel_mxt_ts { + status = "okay"; +}; + +&backlight { + status = "okay"; +}; + +&gpio2 { + /* + * This switches the LVDS transceiver to VESA color mapping mode. + */ + lvds-color-map-hog { + gpio-hog; + gpios = <13 GPIO_ACTIVE_HIGH>; /* SODIMM 95 */ + line-name = "LVDS_COLOR_MAP"; + output-low; + }; +}; + +&gpio7 { + /* + * This switches the LVDS transceiver to the 24-bit RGB mode. + */ + lvds-rgb-mode-hog { + gpio-hog; + gpios = <2 GPIO_ACTIVE_HIGH>; /* SODIMM 63 */ + line-name = "LVDS_RGB_MODE"; + output-low; + }; + + /* + * This switches the LVDS transceiver to the single-channel + * output mode. + */ + lvds-ch-mode-hog { + gpio-hog; + gpios = <3 GPIO_ACTIVE_HIGH>; /* SODIMM 55 */ + line-name = "LVDS_CH_MODE"; + output-high; + }; + + /* This turns the LVDS transceiver on */ + lvds-power-on-hog { + gpio-hog; + gpios = <11 GPIO_ACTIVE_HIGH>; /* SODIMM 99 */ + line-name = "LVDS_POWER_ON"; + output-high; + }; +}; + +&lcdif { + status = "okay"; +}; + +&panel_dpi { + status = "okay"; +}; diff --git a/dts/src/arm/imx7s-colibri-iris.dts b/dts/src/arm/imx7s-colibri-iris.dts new file mode 100644 index 0000000000..26ba72c17f --- /dev/null +++ b/dts/src/arm/imx7s-colibri-iris.dts @@ -0,0 +1,51 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; +#include "imx7s-colibri.dtsi" +#include "imx7-colibri-iris.dtsi" + +/ { + model = "Toradex Colibri iMX7S on Iris Carrier Board"; + compatible = "toradex,colibri-imx7s-iris", + "toradex,colibri-imx7s", + "fsl,imx7s"; +}; + +&ad7879_ts { + status = "okay"; +}; + +/* + * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3. + * So if you enable following capacitive touch controller, disable pwm2/pwm3 first. + */ +&atmel_mxt_ts { + status = "disabled"; +}; + +&backlight { + status = "okay"; +}; + +&lcdif { + status = "okay"; +}; + +&panel_dpi { + status = "okay"; +}; + +/* Colibri PWM<B> */ +&pwm2 { + /* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */ + status = "okay"; +}; + +/* Colibri PWM<C> */ +&pwm3 { + /* The pwm3 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */ + status = "okay"; +}; diff --git a/dts/src/arm/imx7s-colibri.dtsi b/dts/src/arm/imx7s-colibri.dtsi index 94de220a59..ef51395d35 100644 --- a/dts/src/arm/imx7s-colibri.dtsi +++ b/dts/src/arm/imx7s-colibri.dtsi @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2016-2020 Toradex + * Copyright 2016-2022 Toradex */ #include "imx7s.dtsi" @@ -13,6 +13,7 @@ }; }; +/* NAND */ &gpmi { status = "okay"; }; diff --git a/dts/src/arm/imx7s.dtsi b/dts/src/arm/imx7s.dtsi index 039eed79d2..29148285f9 100644 --- a/dts/src/arm/imx7s.dtsi +++ b/dts/src/arm/imx7s.dtsi @@ -176,7 +176,7 @@ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; }; - soc { + soc: soc { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; diff --git a/dts/src/arm/imxrt1050.dtsi b/dts/src/arm/imxrt1050.dtsi index 77b911b060..03e6a858a7 100644 --- a/dts/src/arm/imxrt1050.dtsi +++ b/dts/src/arm/imxrt1050.dtsi @@ -83,7 +83,7 @@ }; usdhc1: mmc@402c0000 { - compatible ="fsl,imxrt1050-usdhc", "fsl,imx6sl-usdhc"; + compatible = "fsl,imxrt1050-usdhc", "fsl,imx6sl-usdhc"; reg = <0x402c0000 0x4000>; interrupts = <110>; clocks = <&clks IMXRT1050_CLK_IPG_PDOF>, @@ -95,7 +95,7 @@ no-1-8-v; max-frequency = <4000000>; fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; status = "disabled"; }; diff --git a/dts/src/arm/imxrt1170-pinfunc.h b/dts/src/arm/imxrt1170-pinfunc.h new file mode 100644 index 0000000000..3b9fff2f08 --- /dev/null +++ b/dts/src/arm/imxrt1170-pinfunc.h @@ -0,0 +1,1561 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Copyright (C) 2021 + * Author(s): Jesse Taube <Mr.Bossman075@gmail.com> + */ + +#ifndef _DT_BINDINGS_PINCTRL_IMXRT1170_PINFUNC_H +#define _DT_BINDINGS_PINCTRL_IMXRT1170_PINFUNC_H + +#define IMX_PAD_SION 0x40000000 + +/* + * The pin function ID is a tuple of + * <mux_reg conf_reg input_reg mux_mode input_val> + */ + +#define IOMUXC_GPIO_LPSR_00_FLEXCAN3_TX 0x000 0x040 0x0 0x0 0x0 +#define IOMUXC_GPIO_LPSR_00_MIC_CLK 0x000 0x040 0x0 0x1 0x0 +#define IOMUXC_GPIO_LPSR_00_MQS_RIGHT 0x000 0x040 0x0 0x2 0x0 +#define IOMUXC_GPIO_LPSR_00_ARM_CM4_EVENTO 0x000 0x040 0x0 0x3 0x0 +#define IOMUXC_GPIO_LPSR_00_GPIO_MUX6_IO00 0x000 0x040 0x0 0x5 0x0 +#define IOMUXC_GPIO_LPSR_00_LPUART12_TXD 0x000 0x040 0x0B0 0x6 0x0 +#define IOMUXC_GPIO_LPSR_00_SAI4_MCLK 0x000 0x040 0x0C8 0x7 0x0 +#define IOMUXC_GPIO_LPSR_00_GPIO12_IO00 0x000 0x040 0x0 0xA 0x0 + +#define IOMUXC_GPIO_LPSR_01_FLEXCAN3_RX 0x004 0x044 0x080 0x0 0x0 +#define IOMUXC_GPIO_LPSR_01_MIC_BITSTREAM0 0x004 0x044 0x0B4 0x1 0x0 +#define IOMUXC_GPIO_LPSR_01_MQS_LEFT 0x004 0x044 0x0 0x2 0x0 +#define IOMUXC_GPIO_LPSR_01_ARM_CM4_EVENTI 0x004 0x044 0x0 0x3 0x0 +#define IOMUXC_GPIO_LPSR_01_GPIO_MUX6_IO01 0x004 0x044 0x0 0x5 0x0 +#define IOMUXC_GPIO_LPSR_01_LPUART12_RXD 0x004 0x044 0x0AC 0x6 0x0 +#define IOMUXC_GPIO_LPSR_01_GPIO12_IO01 0x004 0x044 0x0 0xA 0x0 + +#define IOMUXC_GPIO_LPSR_02_GPIO12_IO02 0x008 0x048 0x0 0xA 0x0 +#define IOMUXC_GPIO_LPSR_02_SRC_BOOT_MODE00 0x008 0x048 0x0 0x0 0x0 +#define IOMUXC_GPIO_LPSR_02_LPSPI5_SCK 0x008 0x048 0x098 0x1 0x0 +#define IOMUXC_GPIO_LPSR_02_SAI4_TX_DATA 0x008 0x048 0x0 0x2 0x0 +#define IOMUXC_GPIO_LPSR_02_MQS_RIGHT 0x008 0x048 0x0 0x3 0x0 +#define IOMUXC_GPIO_LPSR_02_GPIO_MUX6_IO02 0x008 0x048 0x0 0x5 0x0 + +#define IOMUXC_GPIO_LPSR_03_SRC_BOOT_MODE01 0x00C 0x04C 0x0 0x0 0x0 +#define IOMUXC_GPIO_LPSR_03_LPSPI5_PCS0 0x00C 0x04C 0x094 0x1 0x0 +#define IOMUXC_GPIO_LPSR_03_SAI4_TX_SYNC 0x00C 0x04C 0x0DC 0x2 0x0 +#define IOMUXC_GPIO_LPSR_03_MQS_LEFT 0x00C 0x04C 0x0 0x3 0x0 +#define IOMUXC_GPIO_LPSR_03_GPIO_MUX6_IO03 0x00C 0x04C 0x0 0x5 0x0 +#define IOMUXC_GPIO_LPSR_03_GPIO12_IO03 0x00C 0x04C 0x0 0xA 0x0 + +#define IOMUXC_GPIO_LPSR_04_LPI2C5_SDA 0x010 0x050 0x088 0x0 0x0 +#define IOMUXC_GPIO_LPSR_04_LPSPI5_SOUT 0x010 0x050 0x0A0 0x1 0x0 +#define IOMUXC_GPIO_LPSR_04_SAI4_TX_BCLK 0x010 0x050 0x0D8 0x2 0x0 +#define IOMUXC_GPIO_LPSR_04_LPUART12_RTS_B 0x010 0x050 0x0 0x3 0x0 +#define IOMUXC_GPIO_LPSR_04_GPIO_MUX6_IO04 0x010 0x050 0x0 0x5 0x0 +#define IOMUXC_GPIO_LPSR_04_LPUART11_TXD 0x010 0x050 0x0A8 0x6 0x0 +#define IOMUXC_GPIO_LPSR_04_GPIO12_IO04 0x010 0x050 0x0 0xA 0x0 + +#define IOMUXC_GPIO_LPSR_05_GPIO12_IO05 0x014 0x054 0x0 0xA 0x0 +#define IOMUXC_GPIO_LPSR_05_LPI2C5_SCL 0x014 0x054 0x084 0x0 0x0 +#define IOMUXC_GPIO_LPSR_05_LPSPI5_SIN 0x014 0x054 0x09C 0x1 0x0 +#define IOMUXC_GPIO_LPSR_05_SAI4_MCLK 0x014 0x054 0x0C8 0x2 0x1 +#define IOMUXC_GPIO_LPSR_05_LPUART12_CTS_B 0x014 0x054 0x0 0x3 0x0 +#define IOMUXC_GPIO_LPSR_05_GPIO_MUX6_IO05 0x014 0x054 0x0 0x5 0x0 +#define IOMUXC_GPIO_LPSR_05_LPUART11_RXD 0x014 0x054 0x0A4 0x6 0x0 +#define IOMUXC_GPIO_LPSR_05_NMI_GLUE_NMI 0x014 0x054 0x0C4 0x7 0x0 + +#define IOMUXC_GPIO_LPSR_06_LPI2C6_SDA 0x018 0x058 0x090 0x0 0x0 +#define IOMUXC_GPIO_LPSR_06_SAI4_RX_DATA 0x018 0x058 0x0D0 0x2 0x0 +#define IOMUXC_GPIO_LPSR_06_LPUART12_TXD 0x018 0x058 0x0B0 0x3 0x1 +#define IOMUXC_GPIO_LPSR_06_LPSPI6_PCS3 0x018 0x058 0x0 0x4 0x0 +#define IOMUXC_GPIO_LPSR_06_GPIO_MUX6_IO06 0x018 0x058 0x0 0x5 0x0 +#define IOMUXC_GPIO_LPSR_06_FLEXCAN3_TX 0x018 0x058 0x0 0x6 0x0 +#define IOMUXC_GPIO_LPSR_06_PIT2_TRIGGER3 0x018 0x058 0x0 0x7 0x0 +#define IOMUXC_GPIO_LPSR_06_LPSPI5_PCS1 0x018 0x058 0x0 0x8 0x0 +#define IOMUXC_GPIO_LPSR_06_GPIO12_IO06 0x018 0x058 0x0 0xA 0x0 + +#define IOMUXC_GPIO_LPSR_07_LPI2C6_SCL 0x01C 0x05C 0x08C 0x0 0x0 +#define IOMUXC_GPIO_LPSR_07_SAI4_RX_BCLK 0x01C 0x05C 0x0CC 0x2 0x0 +#define IOMUXC_GPIO_LPSR_07_LPUART12_RXD 0x01C 0x05C 0x0AC 0x3 0x1 +#define IOMUXC_GPIO_LPSR_07_LPSPI6_PCS2 0x01C 0x05C 0x0 0x4 0x0 +#define IOMUXC_GPIO_LPSR_07_GPIO_MUX6_IO07 0x01C 0x05C 0x0 0x5 0x0 +#define IOMUXC_GPIO_LPSR_07_FLEXCAN3_RX 0x01C 0x05C 0x080 0x6 0x1 +#define IOMUXC_GPIO_LPSR_07_PIT2_TRIGGER2 0x01C 0x05C 0x0 0x7 0x0 +#define IOMUXC_GPIO_LPSR_07_LPSPI5_PCS2 0x01C 0x05C 0x0 0x8 0x0 +#define IOMUXC_GPIO_LPSR_07_GPIO12_IO07 0x01C 0x05C 0x0 0xA 0x0 + +#define IOMUXC_GPIO_LPSR_08_GPIO12_IO08 0x020 0x060 0x0 0xA 0x0 +#define IOMUXC_GPIO_LPSR_08_LPUART11_TXD 0x020 0x060 0x0A8 0x0 0x1 +#define IOMUXC_GPIO_LPSR_08_FLEXCAN3_TX 0x020 0x060 0x0 0x1 0x0 +#define IOMUXC_GPIO_LPSR_08_SAI4_RX_SYNC 0x020 0x060 0x0D4 0x2 0x0 +#define IOMUXC_GPIO_LPSR_08_MIC_CLK 0x020 0x060 0x0 0x3 0x0 +#define IOMUXC_GPIO_LPSR_08_LPSPI6_PCS1 0x020 0x060 0x0 0x4 0x0 +#define IOMUXC_GPIO_LPSR_08_GPIO_MUX6_IO08 0x020 0x060 0x0 0x5 0x0 +#define IOMUXC_GPIO_LPSR_08_LPI2C5_SDA 0x020 0x060 0x088 0x6 0x1 +#define IOMUXC_GPIO_LPSR_08_PIT2_TRIGGER1 0x020 0x060 0x0 0x7 0x0 +#define IOMUXC_GPIO_LPSR_08_LPSPI5_PCS3 0x020 0x060 0x0 0x8 0x0 + +#define IOMUXC_GPIO_LPSR_09_GPIO12_IO09 0x024 0x064 0x0 0xA 0x0 +#define IOMUXC_GPIO_LPSR_09_LPUART11_RXD 0x024 0x064 0x0A4 0x0 0x1 +#define IOMUXC_GPIO_LPSR_09_FLEXCAN3_RX 0x024 0x064 0x080 0x1 0x2 +#define IOMUXC_GPIO_LPSR_09_PIT2_TRIGGER0 0x024 0x064 0x0 0x2 0x0 +#define IOMUXC_GPIO_LPSR_09_MIC_BITSTREAM0 0x024 0x064 0x0B4 0x3 0x1 +#define IOMUXC_GPIO_LPSR_09_LPSPI6_PCS0 0x024 0x064 0x0 0x4 0x0 +#define IOMUXC_GPIO_LPSR_09_GPIO_MUX6_IO09 0x024 0x064 0x0 0x5 0x0 +#define IOMUXC_GPIO_LPSR_09_LPI2C5_SCL 0x024 0x064 0x084 0x6 0x1 +#define IOMUXC_GPIO_LPSR_09_SAI4_TX_DATA 0x024 0x064 0x0 0x7 0x0 + +#define IOMUXC_GPIO_LPSR_10_GPIO12_IO10 0x028 0x068 0x0 0xA 0x0 +#define IOMUXC_GPIO_LPSR_10_JTAG_MUX_TRSTB 0x028 0x068 0x0 0x0 0x0 +#define IOMUXC_GPIO_LPSR_10_LPUART11_CTS_B 0x028 0x068 0x0 0x1 0x0 +#define IOMUXC_GPIO_LPSR_10_LPI2C6_SDA 0x028 0x068 0x090 0x2 0x1 +#define IOMUXC_GPIO_LPSR_10_MIC_BITSTREAM1 0x028 0x068 0x0B8 0x3 0x0 +#define IOMUXC_GPIO_LPSR_10_LPSPI6_SCK 0x028 0x068 0x0 0x4 0x0 +#define IOMUXC_GPIO_LPSR_10_GPIO_MUX6_IO10 0x028 0x068 0x0 0x5 0x0 +#define IOMUXC_GPIO_LPSR_10_LPI2C5_SCLS 0x028 0x068 0x0 0x6 0x0 +#define IOMUXC_GPIO_LPSR_10_SAI4_TX_SYNC 0x028 0x068 0x0DC 0x7 0x1 +#define IOMUXC_GPIO_LPSR_10_LPUART12_TXD 0x028 0x068 0x0B0 0x8 0x2 + +#define IOMUXC_GPIO_LPSR_11_JTAG_MUX_TDO 0x02C 0x06C 0x0 0x0 0x0 +#define IOMUXC_GPIO_LPSR_11_LPUART11_RTS_B 0x02C 0x06C 0x0 0x1 0x0 +#define IOMUXC_GPIO_LPSR_11_LPI2C6_SCL 0x02C 0x06C 0x08C 0x2 0x1 +#define IOMUXC_GPIO_LPSR_11_MIC_BITSTREAM2 0x02C 0x06C 0x0BC 0x3 0x0 +#define IOMUXC_GPIO_LPSR_11_LPSPI6_SOUT 0x02C 0x06C 0x0 0x4 0x0 +#define IOMUXC_GPIO_LPSR_11_GPIO_MUX6_IO11 0x02C 0x06C 0x0 0x5 0x0 +#define IOMUXC_GPIO_LPSR_11_LPI2C5_SDAS 0x02C 0x06C 0x0 0x6 0x0 +#define IOMUXC_GPIO_LPSR_11_ARM_TRACE_SWO 0x02C 0x06C 0x0 0x7 0x0 +#define IOMUXC_GPIO_LPSR_11_LPUART12_RXD 0x02C 0x06C 0x0AC 0x8 0x2 +#define IOMUXC_GPIO_LPSR_11_GPIO12_IO11 0x02C 0x06C 0x0 0xA 0x0 + +#define IOMUXC_GPIO_LPSR_12_GPIO12_IO12 0x030 0x070 0x0 0xA 0x0 +#define IOMUXC_GPIO_LPSR_12_JTAG_MUX_TDI 0x030 0x070 0x0 0x0 0x0 +#define IOMUXC_GPIO_LPSR_12_PIT2_TRIGGER0 0x030 0x070 0x0 0x1 0x0 +#define IOMUXC_GPIO_LPSR_12_MIC_BITSTREAM3 0x030 0x070 0x0C0 0x3 0x0 +#define IOMUXC_GPIO_LPSR_12_LPSPI6_SIN 0x030 0x070 0x0 0x4 0x0 +#define IOMUXC_GPIO_LPSR_12_GPIO_MUX6_IO12 0x030 0x070 0x0 0x5 0x0 +#define IOMUXC_GPIO_LPSR_12_LPI2C5_HREQ 0x030 0x070 0x0 0x6 0x0 +#define IOMUXC_GPIO_LPSR_12_SAI4_TX_BCLK 0x030 0x070 0x0D8 0x7 0x1 +#define IOMUXC_GPIO_LPSR_12_LPSPI5_SCK 0x030 0x070 0x098 0x8 0x1 + +#define IOMUXC_GPIO_LPSR_13_GPIO12_IO13 0x034 0x074 0x0 0xA 0x0 +#define IOMUXC_GPIO_LPSR_13_JTAG_MUX_MOD 0x034 0x074 0x0 0x0 0x0 +#define IOMUXC_GPIO_LPSR_13_MIC_BITSTREAM1 0x034 0x074 0x0B8 0x1 0x1 +#define IOMUXC_GPIO_LPSR_13_PIT2_TRIGGER1 0x034 0x074 0x0 0x2 0x0 +#define IOMUXC_GPIO_LPSR_13_GPIO_MUX6_IO13 0x034 0x074 0x0 0x5 0x0 +#define IOMUXC_GPIO_LPSR_13_SAI4_RX_DATA 0x034 0x074 0x0D0 0x7 0x1 +#define IOMUXC_GPIO_LPSR_13_LPSPI5_PCS0 0x034 0x074 0x094 0x8 0x1 + +#define IOMUXC_GPIO_LPSR_14_JTAG_MUX_TCK 0x038 0x078 0x0 0x0 0x0 +#define IOMUXC_GPIO_LPSR_14_MIC_BITSTREAM2 0x038 0x078 0x0BC 0x1 0x1 +#define IOMUXC_GPIO_LPSR_14_PIT2_TRIGGER2 0x038 0x078 0x0 0x2 0x0 +#define IOMUXC_GPIO_LPSR_14_GPIO_MUX6_IO14 0x038 0x078 0x0 0x5 0x0 +#define IOMUXC_GPIO_LPSR_14_SAI4_RX_BCLK 0x038 0x078 0x0CC 0x7 0x1 +#define IOMUXC_GPIO_LPSR_14_LPSPI5_SOUT 0x038 0x078 0x0A0 0x8 0x1 +#define IOMUXC_GPIO_LPSR_14_GPIO12_IO14 0x038 0x078 0x0 0xA 0x0 + +#define IOMUXC_GPIO_LPSR_15_GPIO12_IO15 0x03C 0x07C 0x0 0xA 0x0 +#define IOMUXC_GPIO_LPSR_15_JTAG_MUX_TMS 0x03C 0x07C 0x0 0x0 0x0 +#define IOMUXC_GPIO_LPSR_15_MIC_BITSTREAM3 0x03C 0x07C 0x0C0 0x1 0x1 +#define IOMUXC_GPIO_LPSR_15_PIT2_TRIGGER3 0x03C 0x07C 0x0 0x2 0x0 +#define IOMUXC_GPIO_LPSR_15_GPIO_MUX6_IO15 0x03C 0x07C 0x0 0x5 0x0 +#define IOMUXC_GPIO_LPSR_15_SAI4_RX_SYNC 0x03C 0x07C 0x0D4 0x7 0x1 +#define IOMUXC_GPIO_LPSR_15_LPSPI5_SIN 0x03C 0x07C 0x09C 0x8 0x1 + +#define IOMUXC_WAKEUP_DIG_GPIO13_IO00 0x40C94000 0x40C94040 0x0 0x5 0x0 +#define IOMUXC_WAKEUP_DIG_NMI_GLUE_NMI 0x40C94000 0x40C94040 0x0C4 0x7 0x1 + +#define IOMUXC_PMIC_ON_REQ_DIG_SNVS_LP_PMIC_ON_REQ 0x40C94004 0x40C94044 0x0 0x0 0x0 +#define IOMUXC_PMIC_ON_REQ_DIG_GPIO13_IO01 0x40C94004 0x40C94044 0x0 0x5 0x0 + +#define IOMUXC_PMIC_STBY_REQ_DIG_CCM_PMIC_VSTBY_REQ 0x40C94008 0x40C94048 0x0 0x0 0x0 +#define IOMUXC_PMIC_STBY_REQ_DIG_GPIO13_IO02 0x40C94008 0x40C94048 0x0 0x5 0x0 + +#define IOMUXC_GPIO_SNVS_00_DIG_SNVS_TAMPER0 0x40C9400C 0x40C9404C 0x0 0x0 0x0 +#define IOMUXC_GPIO_SNVS_00_DIG_GPIO13_IO03 0x40C9400C 0x40C9404C 0x0 0x5 0x0 + +#define IOMUXC_GPIO_SNVS_01_DIG_SNVS_TAMPER1 0x40C94010 0x40C94050 0x0 0x0 0x0 +#define IOMUXC_GPIO_SNVS_01_DIG_GPIO13_IO04 0x40C94010 0x40C94050 0x0 0x5 0x0 + +#define IOMUXC_GPIO_SNVS_02_DIG_SNVS_TAMPER2 0x40C94014 0x40C94054 0x0 0x0 0x0 +#define IOMUXC_GPIO_SNVS_02_DIG_GPIO13_IO05 0x40C94014 0x40C94054 0x0 0x5 0x0 + +#define IOMUXC_GPIO_SNVS_03_DIG_SNVS_TAMPER3 0x40C94018 0x40C94058 0x0 0x0 0x0 +#define IOMUXC_GPIO_SNVS_03_DIG_GPIO13_IO06 0x40C94018 0x40C94058 0x0 0x5 0x0 + +#define IOMUXC_GPIO_SNVS_04_DIG_SNVS_TAMPER4 0x40C9401C 0x40C9405C 0x0 0x0 0x0 +#define IOMUXC_GPIO_SNVS_04_DIG_GPIO13_IO07 0x40C9401C 0x40C9405C 0x0 0x5 0x0 + +#define IOMUXC_GPIO_SNVS_05_DIG_SNVS_TAMPER5 0x40C94020 0x40C94060 0x0 0x0 0x0 +#define IOMUXC_GPIO_SNVS_05_DIG_GPIO13_IO08 0x40C94020 0x40C94060 0x0 0x5 0x0 + +#define IOMUXC_GPIO_SNVS_06_DIG_SNVS_TAMPER6 0x40C94024 0x40C94064 0x0 0x0 0x0 +#define IOMUXC_GPIO_SNVS_06_DIG_GPIO13_IO09 0x40C94024 0x40C94064 0x0 0x5 0x0 + +#define IOMUXC_GPIO_SNVS_07_DIG_SNVS_TAMPER7 0x40C94028 0x40C94068 0x0 0x0 0x0 +#define IOMUXC_GPIO_SNVS_07_DIG_GPIO13_IO10 0x40C94028 0x40C94068 0x0 0x5 0x0 + +#define IOMUXC_GPIO_SNVS_08_DIG_SNVS_TAMPER8 0x40C9402C 0x40C9406C 0x0 0x0 0x0 +#define IOMUXC_GPIO_SNVS_08_DIG_GPIO13_IO11 0x40C9402C 0x40C9406C 0x0 0x5 0x0 + +#define IOMUXC_GPIO_SNVS_09_DIG_SNVS_TAMPER9 0x40C94030 0x40C94070 0x0 0x0 0x0 +#define IOMUXC_GPIO_SNVS_09_DIG_GPIO13_IO12 0x40C94030 0x40C94070 0x0 0x5 0x0 + +#define IOMUXC_TEST_MODE_DIG 0x0 0x40C94034 0x0 0x0 0x0 + +#define IOMUXC_POR_B_DIG 0x0 0x40C94038 0x0 0x0 0x0 + +#define IOMUXC_ONOFF_DIG 0x0 0x40C9403C 0x0 0x0 0x0 + +#define IOMUXC_GPIO_EMC_B1_00_SEMC_DATA00 0x010 0x254 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B1_00_FLEXPWM4_PWM0_A 0x010 0x254 0x0 0x1 0x0 +#define IOMUXC_GPIO_EMC_B1_00_GPIO_MUX1_IO00 0x010 0x254 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B1_00_FLEXIO1_D00 0x010 0x254 0x0 0x8 0x0 +#define IOMUXC_GPIO_EMC_B1_00_GPIO7_IO00 0x010 0x254 0x0 0xA 0x0 + +#define IOMUXC_GPIO_EMC_B1_01_GPIO7_IO01 0x014 0x258 0x0 0xA 0x0 +#define IOMUXC_GPIO_EMC_B1_01_SEMC_DATA01 0x014 0x258 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B1_01_FLEXPWM4_PWM0_B 0x014 0x258 0x0 0x1 0x0 +#define IOMUXC_GPIO_EMC_B1_01_GPIO_MUX1_IO01 0x014 0x258 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B1_01_FLEXIO1_D01 0x014 0x258 0x0 0x8 0x0 + +#define IOMUXC_GPIO_EMC_B1_02_SEMC_DATA02 0x018 0x25C 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B1_02_FLEXPWM4_PWM1_A 0x018 0x25C 0x0 0x1 0x0 +#define IOMUXC_GPIO_EMC_B1_02_GPIO_MUX1_IO02 0x018 0x25C 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B1_02_FLEXIO1_D02 0x018 0x25C 0x0 0x8 0x0 +#define IOMUXC_GPIO_EMC_B1_02_GPIO7_IO02 0x018 0x25C 0x0 0xA 0x0 + +#define IOMUXC_GPIO_EMC_B1_03_SEMC_DATA03 0x01C 0x260 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B1_03_FLEXPWM4_PWM1_B 0x01C 0x260 0x0 0x1 0x0 +#define IOMUXC_GPIO_EMC_B1_03_GPIO_MUX1_IO03 0x01C 0x260 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B1_03_FLEXIO1_D03 0x01C 0x260 0x0 0x8 0x0 +#define IOMUXC_GPIO_EMC_B1_03_GPIO7_IO03 0x01C 0x260 0x0 0xA 0x0 + +#define IOMUXC_GPIO_EMC_B1_04_GPIO7_IO04 0x020 0x264 0x0 0xA 0x0 +#define IOMUXC_GPIO_EMC_B1_04_SEMC_DATA04 0x020 0x264 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B1_04_FLEXPWM4_PWM2_A 0x020 0x264 0x0 0x1 0x0 +#define IOMUXC_GPIO_EMC_B1_04_GPIO_MUX1_IO04 0x020 0x264 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B1_04_FLEXIO1_D04 0x020 0x264 0x0 0x8 0x0 + +#define IOMUXC_GPIO_EMC_B1_05_SEMC_DATA05 0x024 0x268 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B1_05_FLEXPWM4_PWM2_B 0x024 0x268 0x0 0x1 0x0 +#define IOMUXC_GPIO_EMC_B1_05_GPIO_MUX1_IO05 0x024 0x268 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B1_05_FLEXIO1_D05 0x024 0x268 0x0 0x8 0x0 +#define IOMUXC_GPIO_EMC_B1_05_GPIO7_IO05 0x024 0x268 0x0 0xA 0x0 + +#define IOMUXC_GPIO_EMC_B1_06_SEMC_DATA06 0x028 0x26C 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B1_06_FLEXPWM2_PWM0_A 0x028 0x26C 0x518 0x1 0x0 +#define IOMUXC_GPIO_EMC_B1_06_GPIO_MUX1_IO06 0x028 0x26C 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B1_06_FLEXIO1_D06 0x028 0x26C 0x0 0x8 0x0 +#define IOMUXC_GPIO_EMC_B1_06_GPIO7_IO06 0x028 0x26C 0x0 0xA 0x0 + +#define IOMUXC_GPIO_EMC_B1_07_GPIO7_IO07 0x02C 0x270 0x0 0xA 0x0 +#define IOMUXC_GPIO_EMC_B1_07_SEMC_DATA07 0x02C 0x270 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B1_07_FLEXPWM2_PWM0_B 0x02C 0x270 0x524 0x1 0x0 +#define IOMUXC_GPIO_EMC_B1_07_GPIO_MUX1_IO07 0x02C 0x270 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B1_07_FLEXIO1_D07 0x02C 0x270 0x0 0x8 0x0 + +#define IOMUXC_GPIO_EMC_B1_08_SEMC_DM00 0x030 0x274 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B1_08_FLEXPWM2_PWM1_A 0x030 0x274 0x51C 0x1 0x0 +#define IOMUXC_GPIO_EMC_B1_08_GPIO_MUX1_IO08 0x030 0x274 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B1_08_FLEXIO1_D08 0x030 0x274 0x0 0x8 0x0 +#define IOMUXC_GPIO_EMC_B1_08_GPIO7_IO08 0x030 0x274 0x0 0xA 0x0 + +#define IOMUXC_GPIO_EMC_B1_09_SEMC_ADDR00 0x034 0x278 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B1_09_FLEXPWM2_PWM1_B 0x034 0x278 0x528 0x1 0x0 +#define IOMUXC_GPIO_EMC_B1_09_GPT5_CAPTURE1 0x034 0x278 0x0 0x2 0x0 +#define IOMUXC_GPIO_EMC_B1_09_GPIO_MUX1_IO09 0x034 0x278 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B1_09_FLEXIO1_D09 0x034 0x278 0x0 0x8 0x0 +#define IOMUXC_GPIO_EMC_B1_09_GPIO7_IO09 0x034 0x278 0x0 0xA 0x0 + +#define IOMUXC_GPIO_EMC_B1_10_SEMC_ADDR01 0x038 0x27C 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B1_10_FLEXPWM2_PWM2_A 0x038 0x27C 0x520 0x1 0x0 +#define IOMUXC_GPIO_EMC_B1_10_GPT5_CAPTURE2 0x038 0x27C 0x0 0x2 0x0 +#define IOMUXC_GPIO_EMC_B1_10_GPIO_MUX1_IO10 0x038 0x27C 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B1_10_FLEXIO1_D10 0x038 0x27C 0x0 0x8 0x0 +#define IOMUXC_GPIO_EMC_B1_10_GPIO7_IO10 0x038 0x27C 0x0 0xA 0x0 + +#define IOMUXC_GPIO_EMC_B1_11_GPIO7_IO11 0x03C 0x280 0x0 0xA 0x0 +#define IOMUXC_GPIO_EMC_B1_11_SEMC_ADDR02 0x03C 0x280 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B1_11_FLEXPWM2_PWM2_B 0x03C 0x280 0x52C 0x1 0x0 +#define IOMUXC_GPIO_EMC_B1_11_GPT5_COMPARE1 0x03C 0x280 0x0 0x2 0x0 +#define IOMUXC_GPIO_EMC_B1_11_GPIO_MUX1_IO11 0x03C 0x280 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B1_11_FLEXIO1_D11 0x03C 0x280 0x0 0x8 0x0 + +#define IOMUXC_GPIO_EMC_B1_12_SEMC_ADDR03 0x040 0x284 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B1_12_XBAR1_INOUT04 0x040 0x284 0x0 0x1 0x0 +#define IOMUXC_GPIO_EMC_B1_12_GPT5_COMPARE2 0x040 0x284 0x0 0x2 0x0 +#define IOMUXC_GPIO_EMC_B1_12_GPIO_MUX1_IO12 0x040 0x284 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B1_12_FLEXIO1_D12 0x040 0x284 0x0 0x8 0x0 +#define IOMUXC_GPIO_EMC_B1_12_GPIO7_IO12 0x040 0x284 0x0 0xA 0x0 + +#define IOMUXC_GPIO_EMC_B1_13_SEMC_ADDR04 0x044 0x288 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B1_13_XBAR1_INOUT05 0x044 0x288 0x0 0x1 0x0 +#define IOMUXC_GPIO_EMC_B1_13_GPT5_COMPARE3 0x044 0x288 0x0 0x2 0x0 +#define IOMUXC_GPIO_EMC_B1_13_GPIO_MUX1_IO13 0x044 0x288 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B1_13_FLEXIO1_D13 0x044 0x288 0x0 0x8 0x0 +#define IOMUXC_GPIO_EMC_B1_13_GPIO7_IO13 0x044 0x288 0x0 0xA 0x0 + +#define IOMUXC_GPIO_EMC_B1_14_GPIO7_IO14 0x048 0x28C 0x0 0xA 0x0 +#define IOMUXC_GPIO_EMC_B1_14_SEMC_ADDR05 0x048 0x28C 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B1_14_XBAR1_INOUT06 0x048 0x28C 0x0 0x1 0x0 +#define IOMUXC_GPIO_EMC_B1_14_GPT5_CLK 0x048 0x28C 0x0 0x2 0x0 +#define IOMUXC_GPIO_EMC_B1_14_GPIO_MUX1_IO14 0x048 0x28C 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B1_14_FLEXIO1_D14 0x048 0x28C 0x0 0x8 0x0 + +#define IOMUXC_GPIO_EMC_B1_15_SEMC_ADDR06 0x04C 0x290 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B1_15_XBAR1_INOUT07 0x04C 0x290 0x0 0x1 0x0 +#define IOMUXC_GPIO_EMC_B1_15_GPIO_MUX1_IO15 0x04C 0x290 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B1_15_FLEXIO1_D15 0x04C 0x290 0x0 0x8 0x0 +#define IOMUXC_GPIO_EMC_B1_15_GPIO7_IO15 0x04C 0x290 0x0 0xA 0x0 + +#define IOMUXC_GPIO_EMC_B1_16_SEMC_ADDR07 0x050 0x294 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B1_16_XBAR1_INOUT08 0x050 0x294 0x0 0x1 0x0 +#define IOMUXC_GPIO_EMC_B1_16_GPIO_MUX1_IO16 0x050 0x294 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B1_16_FLEXIO1_D16 0x050 0x294 0x0 0x8 0x0 +#define IOMUXC_GPIO_EMC_B1_16_GPIO7_IO16 0x050 0x294 0x0 0xA 0x0 + +#define IOMUXC_GPIO_EMC_B1_17_GPIO7_IO17 0x054 0x298 0x0 0xA 0x0 +#define IOMUXC_GPIO_EMC_B1_17_SEMC_ADDR08 0x054 0x298 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B1_17_FLEXPWM4_PWM3_A 0x054 0x298 0x0 0x1 0x0 +#define IOMUXC_GPIO_EMC_B1_17_TMR1_TIMER0 0x054 0x298 0x63C 0x2 0x0 +#define IOMUXC_GPIO_EMC_B1_17_GPIO_MUX1_IO17 0x054 0x298 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B1_17_FLEXIO1_D17 0x054 0x298 0x0 0x8 0x0 + +#define IOMUXC_GPIO_EMC_B1_18_SEMC_ADDR09 0x058 0x29C 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B1_18_FLEXPWM4_PWM3_B 0x058 0x29C 0x0 0x1 0x0 +#define IOMUXC_GPIO_EMC_B1_18_TMR2_TIMER0 0x058 0x29C 0x648 0x2 0x0 +#define IOMUXC_GPIO_EMC_B1_18_GPIO_MUX1_IO18 0x058 0x29C 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B1_18_FLEXIO1_D18 0x058 0x29C 0x0 0x8 0x0 +#define IOMUXC_GPIO_EMC_B1_18_GPIO7_IO18 0x058 0x29C 0x0 0xA 0x0 + +#define IOMUXC_GPIO_EMC_B1_19_SEMC_ADDR11 0x05C 0x2A0 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B1_19_FLEXPWM2_PWM3_A 0x05C 0x2A0 0x0 0x1 0x0 +#define IOMUXC_GPIO_EMC_B1_19_TMR3_TIMER0 0x05C 0x2A0 0x654 0x2 0x0 +#define IOMUXC_GPIO_EMC_B1_19_GPIO_MUX1_IO19 0x05C 0x2A0 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B1_19_FLEXIO1_D19 0x05C 0x2A0 0x0 0x8 0x0 +#define IOMUXC_GPIO_EMC_B1_19_GPIO7_IO19 0x05C 0x2A0 0x0 0xA 0x0 + +#define IOMUXC_GPIO_EMC_B1_20_SEMC_ADDR12 0x060 0x2A4 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B1_20_FLEXPWM2_PWM3_B 0x060 0x2A4 0x0 0x1 0x0 +#define IOMUXC_GPIO_EMC_B1_20_TMR4_TIMER0 0x060 0x2A4 0x660 0x2 0x0 +#define IOMUXC_GPIO_EMC_B1_20_GPIO_MUX1_IO20 0x060 0x2A4 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B1_20_FLEXIO1_D20 0x060 0x2A4 0x0 0x8 0x0 +#define IOMUXC_GPIO_EMC_B1_20_GPIO7_IO20 0x060 0x2A4 0x0 0xA 0x0 + +#define IOMUXC_GPIO_EMC_B1_21_GPIO7_IO21 0x064 0x2A8 0x0 0xA 0x0 +#define IOMUXC_GPIO_EMC_B1_21_SEMC_BA0 0x064 0x2A8 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B1_21_FLEXPWM3_PWM3_A 0x064 0x2A8 0x53C 0x1 0x0 +#define IOMUXC_GPIO_EMC_B1_21_GPIO_MUX1_IO21 0x064 0x2A8 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B1_21_FLEXIO1_D21 0x064 0x2A8 0x0 0x8 0x0 + +#define IOMUXC_GPIO_EMC_B1_22_GPIO7_IO22 0x068 0x2AC 0x0 0xA 0x0 +#define IOMUXC_GPIO_EMC_B1_22_SEMC_BA1 0x068 0x2AC 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B1_22_FLEXPWM3_PWM3_B 0x068 0x2AC 0x54C 0x1 0x0 +#define IOMUXC_GPIO_EMC_B1_22_GPIO_MUX1_IO22 0x068 0x2AC 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B1_22_FLEXIO1_D22 0x068 0x2AC 0x0 0x8 0x0 + +#define IOMUXC_GPIO_EMC_B1_23_SEMC_ADDR10 0x06C 0x2B0 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B1_23_FLEXPWM1_PWM0_A 0x06C 0x2B0 0x500 0x1 0x0 +#define IOMUXC_GPIO_EMC_B1_23_GPIO_MUX1_IO23 0x06C 0x2B0 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B1_23_FLEXIO1_D23 0x06C 0x2B0 0x0 0x8 0x0 +#define IOMUXC_GPIO_EMC_B1_23_GPIO7_IO23 0x06C 0x2B0 0x0 0xA 0x0 + +#define IOMUXC_GPIO_EMC_B1_24_GPIO7_IO24 0x070 0x2B4 0x0 0xA 0x0 +#define IOMUXC_GPIO_EMC_B1_24_SEMC_CAS 0x070 0x2B4 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B1_24_FLEXPWM1_PWM0_B 0x070 0x2B4 0x50C 0x1 0x0 +#define IOMUXC_GPIO_EMC_B1_24_GPIO_MUX1_IO24 0x070 0x2B4 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B1_24_FLEXIO1_D24 0x070 0x2B4 0x0 0x8 0x0 + +#define IOMUXC_GPIO_EMC_B1_25_GPIO7_IO25 0x074 0x2B8 0x0 0xA 0x0 +#define IOMUXC_GPIO_EMC_B1_25_SEMC_RAS 0x074 0x2B8 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B1_25_FLEXPWM1_PWM1_A 0x074 0x2B8 0x504 0x1 0x0 +#define IOMUXC_GPIO_EMC_B1_25_GPIO_MUX1_IO25 0x074 0x2B8 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B1_25_FLEXIO1_D25 0x074 0x2B8 0x0 0x8 0x0 + +#define IOMUXC_GPIO_EMC_B1_26_SEMC_CLK 0x078 0x2BC 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B1_26_FLEXPWM1_PWM1_B 0x078 0x2BC 0x510 0x1 0x0 +#define IOMUXC_GPIO_EMC_B1_26_GPIO_MUX1_IO26 0x078 0x2BC 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B1_26_FLEXIO1_D26 0x078 0x2BC 0x0 0x8 0x0 +#define IOMUXC_GPIO_EMC_B1_26_GPIO7_IO26 0x078 0x2BC 0x0 0xA 0x0 + +#define IOMUXC_GPIO_EMC_B1_27_GPIO7_IO27 0x07C 0x2C0 0x0 0xA 0x0 +#define IOMUXC_GPIO_EMC_B1_27_SEMC_CKE 0x07C 0x2C0 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B1_27_FLEXPWM1_PWM2_A 0x07C 0x2C0 0x508 0x1 0x0 +#define IOMUXC_GPIO_EMC_B1_27_GPIO_MUX1_IO27 0x07C 0x2C0 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B1_27_FLEXIO1_D27 0x07C 0x2C0 0x0 0x8 0x0 + +#define IOMUXC_GPIO_EMC_B1_28_GPIO7_IO28 0x080 0x2C4 0x0 0xA 0x0 +#define IOMUXC_GPIO_EMC_B1_28_SEMC_WE 0x080 0x2C4 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B1_28_FLEXPWM1_PWM2_B 0x080 0x2C4 0x514 0x1 0x0 +#define IOMUXC_GPIO_EMC_B1_28_GPIO_MUX1_IO28 0x080 0x2C4 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B1_28_FLEXIO1_D28 0x080 0x2C4 0x0 0x8 0x0 + +#define IOMUXC_GPIO_EMC_B1_29_SEMC_CS0 0x084 0x2C8 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B1_29_FLEXPWM3_PWM0_A 0x084 0x2C8 0x530 0x1 0x0 +#define IOMUXC_GPIO_EMC_B1_29_GPIO_MUX1_IO29 0x084 0x2C8 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B1_29_FLEXIO1_D29 0x084 0x2C8 0x0 0x8 0x0 +#define IOMUXC_GPIO_EMC_B1_29_GPIO7_IO29 0x084 0x2C8 0x0 0xA 0x0 + +#define IOMUXC_GPIO_EMC_B1_30_SEMC_DATA08 0x088 0x2CC 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B1_30_FLEXPWM3_PWM0_B 0x088 0x2CC 0x540 0x1 0x0 +#define IOMUXC_GPIO_EMC_B1_30_GPIO_MUX1_IO30 0x088 0x2CC 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B1_30_FLEXIO1_D30 0x088 0x2CC 0x0 0x8 0x0 +#define IOMUXC_GPIO_EMC_B1_30_GPIO7_IO30 0x088 0x2CC 0x0 0xA 0x0 + +#define IOMUXC_GPIO_EMC_B1_31_GPIO7_IO31 0x08C 0x2D0 0x0 0xA 0x0 +#define IOMUXC_GPIO_EMC_B1_31_SEMC_DATA09 0x08C 0x2D0 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B1_31_FLEXPWM3_PWM1_A 0x08C 0x2D0 0x534 0x1 0x0 +#define IOMUXC_GPIO_EMC_B1_31_GPIO_MUX1_IO31 0x08C 0x2D0 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B1_31_FLEXIO1_D31 0x08C 0x2D0 0x0 0x8 0x0 + +#define IOMUXC_GPIO_EMC_B1_32_GPIO8_IO00 0x090 0x2D4 0x0 0xA 0x0 +#define IOMUXC_GPIO_EMC_B1_32_SEMC_DATA10 0x090 0x2D4 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B1_32_FLEXPWM3_PWM1_B 0x090 0x2D4 0x544 0x1 0x0 +#define IOMUXC_GPIO_EMC_B1_32_GPIO_MUX2_IO00 0x090 0x2D4 0x0 0x5 0x0 + +#define IOMUXC_GPIO_EMC_B1_33_SEMC_DATA11 0x094 0x2D8 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B1_33_FLEXPWM3_PWM2_A 0x094 0x2D8 0x538 0x1 0x0 +#define IOMUXC_GPIO_EMC_B1_33_GPIO_MUX2_IO01 0x094 0x2D8 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B1_33_GPIO8_IO01 0x094 0x2D8 0x0 0xA 0x0 + +#define IOMUXC_GPIO_EMC_B1_34_GPIO8_IO02 0x098 0x2DC 0x0 0xA 0x0 +#define IOMUXC_GPIO_EMC_B1_34_SEMC_DATA12 0x098 0x2DC 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B1_34_FLEXPWM3_PWM2_B 0x098 0x2DC 0x548 0x1 0x0 +#define IOMUXC_GPIO_EMC_B1_34_GPIO_MUX2_IO02 0x098 0x2DC 0x0 0x5 0x0 + +#define IOMUXC_GPIO_EMC_B1_35_GPIO8_IO03 0x09C 0x2E0 0x0 0xA 0x0 +#define IOMUXC_GPIO_EMC_B1_35_SEMC_DATA13 0x09C 0x2E0 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B1_35_XBAR1_INOUT09 0x09C 0x2E0 0x0 0x1 0x0 +#define IOMUXC_GPIO_EMC_B1_35_GPIO_MUX2_IO03 0x09C 0x2E0 0x0 0x5 0x0 + +#define IOMUXC_GPIO_EMC_B1_36_SEMC_DATA14 0x0A0 0x2E4 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B1_36_XBAR1_INOUT10 0x0A0 0x2E4 0x0 0x1 0x0 +#define IOMUXC_GPIO_EMC_B1_36_GPIO_MUX2_IO04 0x0A0 0x2E4 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B1_36_GPIO8_IO04 0x0A0 0x2E4 0x0 0xA 0x0 + +#define IOMUXC_GPIO_EMC_B1_37_GPIO8_IO05 0x0A4 0x2E8 0x0 0xA 0x0 +#define IOMUXC_GPIO_EMC_B1_37_SEMC_DATA15 0x0A4 0x2E8 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B1_37_XBAR1_INOUT11 0x0A4 0x2E8 0x0 0x1 0x0 +#define IOMUXC_GPIO_EMC_B1_37_GPIO_MUX2_IO05 0x0A4 0x2E8 0x0 0x5 0x0 + +#define IOMUXC_GPIO_EMC_B1_38_GPIO8_IO06 0x0A8 0x2EC 0x0 0xA 0x0 +#define IOMUXC_GPIO_EMC_B1_38_SEMC_DM01 0x0A8 0x2EC 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B1_38_FLEXPWM1_PWM3_A 0x0A8 0x2EC 0x0 0x1 0x0 +#define IOMUXC_GPIO_EMC_B1_38_TMR1_TIMER1 0x0A8 0x2EC 0x640 0x2 0x0 +#define IOMUXC_GPIO_EMC_B1_38_GPIO_MUX2_IO06 0x0A8 0x2EC 0x0 0x5 0x0 + +#define IOMUXC_GPIO_EMC_B1_39_SEMC_DQS 0x0AC 0x2F0 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B1_39_FLEXPWM1_PWM3_B 0x0AC 0x2F0 0x0 0x1 0x0 +#define IOMUXC_GPIO_EMC_B1_39_TMR2_TIMER1 0x0AC 0x2F0 0x64C 0x2 0x0 +#define IOMUXC_GPIO_EMC_B1_39_GPIO_MUX2_IO07 0x0AC 0x2F0 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B1_39_GPIO8_IO07 0x0AC 0x2F0 0x0 0xA 0x0 + +#define IOMUXC_GPIO_EMC_B1_40_SEMC_RDY 0x0B0 0x2F4 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B1_40_XBAR1_INOUT12 0x0B0 0x2F4 0x0 0x1 0x0 +#define IOMUXC_GPIO_EMC_B1_40_MQS_RIGHT 0x0B0 0x2F4 0x0 0x2 0x0 +#define IOMUXC_GPIO_EMC_B1_40_LPUART6_TXD 0x0B0 0x2F4 0x0 0x3 0x0 +#define IOMUXC_GPIO_EMC_B1_40_GPIO_MUX2_IO08 0x0B0 0x2F4 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B1_40_ENET_1G_MDC 0x0B0 0x2F4 0x0 0x7 0x0 +#define IOMUXC_GPIO_EMC_B1_40_CCM_CLKO1 0x0B0 0x2F4 0x0 0x9 0x0 +#define IOMUXC_GPIO_EMC_B1_40_GPIO8_IO08 0x0B0 0x2F4 0x0 0xA 0x0 + +#define IOMUXC_GPIO_EMC_B1_41_GPIO8_IO09 0x0B4 0x2F8 0x0 0xA 0x0 +#define IOMUXC_GPIO_EMC_B1_41_SEMC_CSX00 0x0B4 0x2F8 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B1_41_XBAR1_INOUT13 0x0B4 0x2F8 0x0 0x1 0x0 +#define IOMUXC_GPIO_EMC_B1_41_MQS_LEFT 0x0B4 0x2F8 0x0 0x2 0x0 +#define IOMUXC_GPIO_EMC_B1_41_LPUART6_RXD 0x0B4 0x2F8 0x0 0x3 0x0 +#define IOMUXC_GPIO_EMC_B1_41_FLEXSPI2_B_DATA07 0x0B4 0x2F8 0x0 0x4 0x0 +#define IOMUXC_GPIO_EMC_B1_41_GPIO_MUX2_IO09 0x0B4 0x2F8 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B1_41_ENET_1G_MDIO 0x0B4 0x2F8 0x4C8 0x7 0x0 +#define IOMUXC_GPIO_EMC_B1_41_CCM_CLKO2 0x0B4 0x2F8 0x0 0x9 0x0 + +#define IOMUXC_GPIO_EMC_B2_00_SEMC_DATA16 0x0B8 0x2FC 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B2_00_CCM_ENET_REF_CLK_25M 0x0B8 0x2FC 0x0 0x1 0x0 +#define IOMUXC_GPIO_EMC_B2_00_TMR3_TIMER1 0x0B8 0x2FC 0x658 0x2 0x0 +#define IOMUXC_GPIO_EMC_B2_00_LPUART6_CTS_B 0x0B8 0x2FC 0x0 0x3 0x0 +#define IOMUXC_GPIO_EMC_B2_00_FLEXSPI2_B_DATA06 0x0B8 0x2FC 0x0 0x4 0x0 +#define IOMUXC_GPIO_EMC_B2_00_GPIO_MUX2_IO10 0x0B8 0x2FC 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B2_00_XBAR1_INOUT20 0x0B8 0x2FC 0x6D8 0x6 0x0 +#define IOMUXC_GPIO_EMC_B2_00_ENET_QOS_1588_EVENT1_OUT 0x0B8 0x2FC 0x0 0x7 0x0 +#define IOMUXC_GPIO_EMC_B2_00_LPSPI1_SCK 0x0B8 0x2FC 0x5D0 0x8 0x0 +#define IOMUXC_GPIO_EMC_B2_00_LPI2C2_SCL 0x0B8 0x2FC 0x5B4 0x9 0x0 +#define IOMUXC_GPIO_EMC_B2_00_GPIO8_IO10 0x0B8 0x2FC 0x0 0xA 0x0 +#define IOMUXC_GPIO_EMC_B2_00_FLEXPWM3_PWM0_A 0x0B8 0x2FC 0x530 0xB 0x1 + +#define IOMUXC_GPIO_EMC_B2_01_SEMC_DATA17 0x0BC 0x300 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B2_01_USDHC2_CD_B 0x0BC 0x300 0x6D0 0x1 0x0 +#define IOMUXC_GPIO_EMC_B2_01_TMR4_TIMER1 0x0BC 0x300 0x664 0x2 0x0 +#define IOMUXC_GPIO_EMC_B2_01_LPUART6_RTS_B 0x0BC 0x300 0x0 0x3 0x0 +#define IOMUXC_GPIO_EMC_B2_01_FLEXSPI2_B_DATA05 0x0BC 0x300 0x0 0x4 0x0 +#define IOMUXC_GPIO_EMC_B2_01_GPIO_MUX2_IO11 0x0BC 0x300 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B2_01_XBAR1_INOUT21 0x0BC 0x300 0x6DC 0x6 0x0 +#define IOMUXC_GPIO_EMC_B2_01_ENET_QOS_1588_EVENT1_IN 0x0BC 0x300 0x0 0x7 0x0 +#define IOMUXC_GPIO_EMC_B2_01_LPSPI1_PCS0 0x0BC 0x300 0x5CC 0x8 0x0 +#define IOMUXC_GPIO_EMC_B2_01_LPI2C2_SDA 0x0BC 0x300 0x5B8 0x9 0x0 +#define IOMUXC_GPIO_EMC_B2_01_GPIO8_IO11 0x0BC 0x300 0x0 0xA 0x0 +#define IOMUXC_GPIO_EMC_B2_01_FLEXPWM3_PWM0_B 0x0BC 0x300 0x540 0xB 0x1 + +#define IOMUXC_GPIO_EMC_B2_02_SEMC_DATA18 0x0C0 0x304 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B2_02_USDHC2_WP 0x0C0 0x304 0x6D4 0x1 0x0 +#define IOMUXC_GPIO_EMC_B2_02_VIDEO_MUX_CSI_DATA23 0x0C0 0x304 0x0 0x3 0x0 +#define IOMUXC_GPIO_EMC_B2_02_FLEXSPI2_B_DATA04 0x0C0 0x304 0x0 0x4 0x0 +#define IOMUXC_GPIO_EMC_B2_02_GPIO_MUX2_IO12 0x0C0 0x304 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B2_02_XBAR1_INOUT22 0x0C0 0x304 0x6E0 0x6 0x0 +#define IOMUXC_GPIO_EMC_B2_02_ENET_QOS_1588_EVENT1_AUX_IN 0x0C0 0x304 0x0 0x7 0x0 +#define IOMUXC_GPIO_EMC_B2_02_LPSPI1_SOUT 0x0C0 0x304 0x5D8 0x8 0x0 +#define IOMUXC_GPIO_EMC_B2_02_GPIO8_IO12 0x0C0 0x304 0x0 0xA 0x0 +#define IOMUXC_GPIO_EMC_B2_02_FLEXPWM3_PWM1_A 0x0C0 0x304 0x534 0xB 0x1 + +#define IOMUXC_GPIO_EMC_B2_03_SEMC_DATA19 0x0C4 0x308 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B2_03_USDHC2_VSELECT 0x0C4 0x308 0x0 0x1 0x0 +#define IOMUXC_GPIO_EMC_B2_03_VIDEO_MUX_CSI_DATA22 0x0C4 0x308 0x0 0x3 0x0 +#define IOMUXC_GPIO_EMC_B2_03_FLEXSPI2_B_DATA03 0x0C4 0x308 0x0 0x4 0x0 +#define IOMUXC_GPIO_EMC_B2_03_GPIO_MUX2_IO13 0x0C4 0x308 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B2_03_XBAR1_INOUT23 0x0C4 0x308 0x6E4 0x6 0x0 +#define IOMUXC_GPIO_EMC_B2_03_ENET_1G_TX_DATA03 0x0C4 0x308 0x0 0x7 0x0 +#define IOMUXC_GPIO_EMC_B2_03_LPSPI1_SIN 0x0C4 0x308 0x5D4 0x8 0x0 +#define IOMUXC_GPIO_EMC_B2_03_GPIO8_IO13 0x0C4 0x308 0x0 0xA 0x0 +#define IOMUXC_GPIO_EMC_B2_03_FLEXPWM3_PWM1_B 0x0C4 0x308 0x544 0xB 0x1 + +#define IOMUXC_GPIO_EMC_B2_04_SEMC_DATA20 0x0C8 0x30C 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B2_04_USDHC2_RESET_B 0x0C8 0x30C 0x0 0x1 0x0 +#define IOMUXC_GPIO_EMC_B2_04_SAI2_MCLK 0x0C8 0x30C 0x0 0x2 0x0 +#define IOMUXC_GPIO_EMC_B2_04_VIDEO_MUX_CSI_DATA21 0x0C8 0x30C 0x0 0x3 0x0 +#define IOMUXC_GPIO_EMC_B2_04_FLEXSPI2_B_DATA02 0x0C8 0x30C 0x0 0x4 0x0 +#define IOMUXC_GPIO_EMC_B2_04_GPIO_MUX2_IO14 0x0C8 0x30C 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B2_04_XBAR1_INOUT24 0x0C8 0x30C 0x6E8 0x6 0x0 +#define IOMUXC_GPIO_EMC_B2_04_ENET_1G_TX_DATA02 0x0C8 0x30C 0x0 0x7 0x0 +#define IOMUXC_GPIO_EMC_B2_04_LPSPI3_SCK 0x0C8 0x30C 0x600 0x8 0x0 +#define IOMUXC_GPIO_EMC_B2_04_GPIO8_IO14 0x0C8 0x30C 0x0 0xA 0x0 +#define IOMUXC_GPIO_EMC_B2_04_FLEXPWM3_PWM2_A 0x0C8 0x30C 0x538 0xB 0x1 + +#define IOMUXC_GPIO_EMC_B2_05_SEMC_DATA21 0x0CC 0x310 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B2_05_GPT3_CLK 0x0CC 0x310 0x598 0x1 0x0 +#define IOMUXC_GPIO_EMC_B2_05_SAI2_RX_SYNC 0x0CC 0x310 0x0 0x2 0x0 +#define IOMUXC_GPIO_EMC_B2_05_VIDEO_MUX_CSI_DATA20 0x0CC 0x310 0x0 0x3 0x0 +#define IOMUXC_GPIO_EMC_B2_05_FLEXSPI2_B_DATA01 0x0CC 0x310 0x0 0x4 0x0 +#define IOMUXC_GPIO_EMC_B2_05_GPIO_MUX2_IO15 0x0CC 0x310 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B2_05_XBAR1_INOUT25 0x0CC 0x310 0x6EC 0x6 0x0 +#define IOMUXC_GPIO_EMC_B2_05_ENET_1G_RX_CLK 0x0CC 0x310 0x4CC 0x7 0x0 +#define IOMUXC_GPIO_EMC_B2_05_LPSPI3_PCS0 0x0CC 0x310 0x5F0 0x8 0x0 +#define IOMUXC_GPIO_EMC_B2_05_PIT1_TRIGGER0 0x0CC 0x310 0x0 0x9 0x0 +#define IOMUXC_GPIO_EMC_B2_05_GPIO8_IO15 0x0CC 0x310 0x0 0xA 0x0 +#define IOMUXC_GPIO_EMC_B2_05_FLEXPWM3_PWM2_B 0x0CC 0x310 0x548 0xB 0x1 + +#define IOMUXC_GPIO_EMC_B2_06_SEMC_DATA22 0x0D0 0x314 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B2_06_GPT3_CAPTURE1 0x0D0 0x314 0x590 0x1 0x0 +#define IOMUXC_GPIO_EMC_B2_06_GPIO8_IO16 0x0D0 0x314 0x0 0xA 0x0 +#define IOMUXC_GPIO_EMC_B2_06_SAI2_RX_BCLK 0x0D0 0x314 0x0 0x2 0x0 +#define IOMUXC_GPIO_EMC_B2_06_FLEXPWM3_PWM3_A 0x0D0 0x314 0x53C 0xB 0x1 +#define IOMUXC_GPIO_EMC_B2_06_VIDEO_MUX_CSI_DATA19 0x0D0 0x314 0x0 0x3 0x0 +#define IOMUXC_GPIO_EMC_B2_06_FLEXSPI2_B_DATA00 0x0D0 0x314 0x0 0x4 0x0 +#define IOMUXC_GPIO_EMC_B2_06_GPIO_MUX2_IO16 0x0D0 0x314 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B2_06_XBAR1_INOUT26 0x0D0 0x314 0x6F0 0x6 0x0 +#define IOMUXC_GPIO_EMC_B2_06_ENET_1G_TX_ER 0x0D0 0x314 0x0 0x7 0x0 +#define IOMUXC_GPIO_EMC_B2_06_LPSPI3_SOUT 0x0D0 0x314 0x608 0x8 0x0 +#define IOMUXC_GPIO_EMC_B2_06_PIT1_TRIGGER1 0x0D0 0x314 0x0 0x9 0x0 + +#define IOMUXC_GPIO_EMC_B2_07_SEMC_DATA23 0x0D4 0x318 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B2_07_GPT3_CAPTURE2 0x0D4 0x318 0x594 0x1 0x0 +#define IOMUXC_GPIO_EMC_B2_07_SAI2_RX_DATA 0x0D4 0x318 0x0 0x2 0x0 +#define IOMUXC_GPIO_EMC_B2_07_VIDEO_MUX_CSI_DATA18 0x0D4 0x318 0x0 0x3 0x0 +#define IOMUXC_GPIO_EMC_B2_07_FLEXSPI2_B_DQS 0x0D4 0x318 0x0 0x4 0x0 +#define IOMUXC_GPIO_EMC_B2_07_GPIO_MUX2_IO17 0x0D4 0x318 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B2_07_XBAR1_INOUT27 0x0D4 0x318 0x6F4 0x6 0x0 +#define IOMUXC_GPIO_EMC_B2_07_ENET_1G_RX_DATA03 0x0D4 0x318 0x4DC 0x7 0x0 +#define IOMUXC_GPIO_EMC_B2_07_LPSPI3_SIN 0x0D4 0x318 0x604 0x8 0x0 +#define IOMUXC_GPIO_EMC_B2_07_PIT1_TRIGGER2 0x0D4 0x318 0x0 0x9 0x0 +#define IOMUXC_GPIO_EMC_B2_07_GPIO8_IO17 0x0D4 0x318 0x0 0xA 0x0 +#define IOMUXC_GPIO_EMC_B2_07_FLEXPWM3_PWM3_B 0x0D4 0x318 0x54C 0xB 0x1 + +#define IOMUXC_GPIO_EMC_B2_08_SEMC_DM02 0x0D8 0x31C 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B2_08_GPT3_COMPARE1 0x0D8 0x31C 0x0 0x1 0x0 +#define IOMUXC_GPIO_EMC_B2_08_SAI2_TX_DATA 0x0D8 0x31C 0x0 0x2 0x0 +#define IOMUXC_GPIO_EMC_B2_08_VIDEO_MUX_CSI_DATA17 0x0D8 0x31C 0x0 0x3 0x0 +#define IOMUXC_GPIO_EMC_B2_08_FLEXSPI2_B_SS0_B 0x0D8 0x31C 0x0 0x4 0x0 +#define IOMUXC_GPIO_EMC_B2_08_GPIO_MUX2_IO18 0x0D8 0x31C 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B2_08_XBAR1_INOUT28 0x0D8 0x31C 0x6F8 0x6 0x0 +#define IOMUXC_GPIO_EMC_B2_08_ENET_1G_RX_DATA02 0x0D8 0x31C 0x4D8 0x7 0x0 +#define IOMUXC_GPIO_EMC_B2_08_LPSPI3_PCS1 0x0D8 0x31C 0x5F4 0x8 0x0 +#define IOMUXC_GPIO_EMC_B2_08_PIT1_TRIGGER3 0x0D8 0x31C 0x0 0x9 0x0 +#define IOMUXC_GPIO_EMC_B2_08_GPIO8_IO18 0x0D8 0x31C 0x0 0xA 0x0 + +#define IOMUXC_GPIO_EMC_B2_09_GPIO8_IO19 0x0DC 0x320 0x0 0xA 0x0 +#define IOMUXC_GPIO_EMC_B2_09_SEMC_DATA24 0x0DC 0x320 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B2_09_GPT3_COMPARE2 0x0DC 0x320 0x0 0x1 0x0 +#define IOMUXC_GPIO_EMC_B2_09_SAI2_TX_BCLK 0x0DC 0x320 0x0 0x2 0x0 +#define IOMUXC_GPIO_EMC_B2_09_VIDEO_MUX_CSI_DATA16 0x0DC 0x320 0x0 0x3 0x0 +#define IOMUXC_GPIO_EMC_B2_09_FLEXSPI2_B_SCLK 0x0DC 0x320 0x0 0x4 0x0 +#define IOMUXC_GPIO_EMC_B2_09_GPIO_MUX2_IO19 0x0DC 0x320 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B2_09_XBAR1_INOUT29 0x0DC 0x320 0x6FC 0x6 0x0 +#define IOMUXC_GPIO_EMC_B2_09_ENET_1G_CRS 0x0DC 0x320 0x0 0x7 0x0 +#define IOMUXC_GPIO_EMC_B2_09_LPSPI3_PCS2 0x0DC 0x320 0x5F8 0x8 0x0 +#define IOMUXC_GPIO_EMC_B2_09_TMR1_TIMER0 0x0DC 0x320 0x63C 0x9 0x1 + +#define IOMUXC_GPIO_EMC_B2_10_GPIO8_IO20 0x0E0 0x324 0x0 0xA 0x0 +#define IOMUXC_GPIO_EMC_B2_10_SEMC_DATA25 0x0E0 0x324 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B2_10_GPT3_COMPARE3 0x0E0 0x324 0x0 0x1 0x0 +#define IOMUXC_GPIO_EMC_B2_10_SAI2_TX_SYNC 0x0E0 0x324 0x0 0x2 0x0 +#define IOMUXC_GPIO_EMC_B2_10_VIDEO_MUX_CSI_FIELD 0x0E0 0x324 0x0 0x3 0x0 +#define IOMUXC_GPIO_EMC_B2_10_FLEXSPI2_A_SCLK 0x0E0 0x324 0x58C 0x4 0x0 +#define IOMUXC_GPIO_EMC_B2_10_GPIO_MUX2_IO20 0x0E0 0x324 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B2_10_XBAR1_INOUT30 0x0E0 0x324 0x700 0x6 0x0 +#define IOMUXC_GPIO_EMC_B2_10_ENET_1G_COL 0x0E0 0x324 0x0 0x7 0x0 +#define IOMUXC_GPIO_EMC_B2_10_LPSPI3_PCS3 0x0E0 0x324 0x5FC 0x8 0x0 +#define IOMUXC_GPIO_EMC_B2_10_TMR1_TIMER1 0x0E0 0x324 0x640 0x9 0x1 + +#define IOMUXC_GPIO_EMC_B2_11_SEMC_DATA26 0x0E4 0x328 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B2_11_SPDIF_IN 0x0E4 0x328 0x6B4 0x1 0x0 +#define IOMUXC_GPIO_EMC_B2_11_ENET_1G_TX_DATA00 0x0E4 0x328 0x0 0x2 0x0 +#define IOMUXC_GPIO_EMC_B2_11_SAI3_RX_SYNC 0x0E4 0x328 0x0 0x3 0x0 +#define IOMUXC_GPIO_EMC_B2_11_FLEXSPI2_A_SS0_B 0x0E4 0x328 0x0 0x4 0x0 +#define IOMUXC_GPIO_EMC_B2_11_GPIO_MUX2_IO21 0x0E4 0x328 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B2_11_XBAR1_INOUT31 0x0E4 0x328 0x704 0x6 0x0 +#define IOMUXC_GPIO_EMC_B2_11_EMVSIM1_IO 0x0E4 0x328 0x69C 0x8 0x0 +#define IOMUXC_GPIO_EMC_B2_11_TMR1_TIMER2 0x0E4 0x328 0x644 0x9 0x0 +#define IOMUXC_GPIO_EMC_B2_11_GPIO8_IO21 0x0E4 0x328 0x0 0xA 0x0 + +#define IOMUXC_GPIO_EMC_B2_12_SEMC_DATA27 0x0E8 0x32C 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B2_12_SPDIF_OUT 0x0E8 0x32C 0x0 0x1 0x0 +#define IOMUXC_GPIO_EMC_B2_12_ENET_1G_TX_DATA01 0x0E8 0x32C 0x0 0x2 0x0 +#define IOMUXC_GPIO_EMC_B2_12_SAI3_RX_BCLK 0x0E8 0x32C 0x0 0x3 0x0 +#define IOMUXC_GPIO_EMC_B2_12_FLEXSPI2_A_DQS 0x0E8 0x32C 0x0 0x4 0x0 +#define IOMUXC_GPIO_EMC_B2_12_GPIO_MUX2_IO22 0x0E8 0x32C 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B2_12_XBAR1_INOUT32 0x0E8 0x32C 0x708 0x6 0x0 +#define IOMUXC_GPIO_EMC_B2_12_EMVSIM1_CLK 0x0E8 0x32C 0x0 0x8 0x0 +#define IOMUXC_GPIO_EMC_B2_12_TMR1_TIMER3 0x0E8 0x32C 0x0 0x9 0x0 +#define IOMUXC_GPIO_EMC_B2_12_GPIO8_IO22 0x0E8 0x32C 0x0 0xA 0x0 + +#define IOMUXC_GPIO_EMC_B2_13_GPIO8_IO23 0x0EC 0x330 0x0 0xA 0x0 +#define IOMUXC_GPIO_EMC_B2_13_SEMC_DATA28 0x0EC 0x330 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B2_13_ENET_1G_TX_EN 0x0EC 0x330 0x0 0x2 0x0 +#define IOMUXC_GPIO_EMC_B2_13_SAI3_RX_DATA 0x0EC 0x330 0x0 0x3 0x0 +#define IOMUXC_GPIO_EMC_B2_13_FLEXSPI2_A_DATA00 0x0EC 0x330 0x57C 0x4 0x0 +#define IOMUXC_GPIO_EMC_B2_13_GPIO_MUX2_IO23 0x0EC 0x330 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B2_13_XBAR1_INOUT33 0x0EC 0x330 0x70C 0x6 0x0 +#define IOMUXC_GPIO_EMC_B2_13_EMVSIM1_RST 0x0EC 0x330 0x0 0x8 0x0 +#define IOMUXC_GPIO_EMC_B2_13_TMR2_TIMER0 0x0EC 0x330 0x648 0x9 0x1 + +#define IOMUXC_GPIO_EMC_B2_14_SEMC_DATA29 0x0F0 0x334 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B2_14_ENET_1G_TX_CLK_IO 0x0F0 0x334 0x4E8 0x2 0x0 +#define IOMUXC_GPIO_EMC_B2_14_SAI3_TX_DATA 0x0F0 0x334 0x0 0x3 0x0 +#define IOMUXC_GPIO_EMC_B2_14_FLEXSPI2_A_DATA01 0x0F0 0x334 0x580 0x4 0x0 +#define IOMUXC_GPIO_EMC_B2_14_GPIO_MUX2_IO24 0x0F0 0x334 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B2_14_XBAR1_INOUT34 0x0F0 0x334 0x710 0x6 0x0 +#define IOMUXC_GPIO_EMC_B2_14_SFA_ipp_do_atx_clk_under_test 0x0F0 0x334 0x0 0x7 0x0 +#define IOMUXC_GPIO_EMC_B2_14_EMVSIM1_SVEN 0x0F0 0x334 0x0 0x8 0x0 +#define IOMUXC_GPIO_EMC_B2_14_TMR2_TIMER1 0x0F0 0x334 0x64C 0x9 0x1 +#define IOMUXC_GPIO_EMC_B2_14_GPIO8_IO24 0x0F0 0x334 0x0 0xA 0x0 + +#define IOMUXC_GPIO_EMC_B2_15_SEMC_DATA30 0x0F4 0x338 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B2_15_ENET_1G_RX_DATA00 0x0F4 0x338 0x4D0 0x2 0x0 +#define IOMUXC_GPIO_EMC_B2_15_SAI3_TX_BCLK 0x0F4 0x338 0x0 0x3 0x0 +#define IOMUXC_GPIO_EMC_B2_15_FLEXSPI2_A_DATA02 0x0F4 0x338 0x584 0x4 0x0 +#define IOMUXC_GPIO_EMC_B2_15_GPIO_MUX2_IO25 0x0F4 0x338 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B2_15_XBAR1_INOUT35 0x0F4 0x338 0x714 0x6 0x0 +#define IOMUXC_GPIO_EMC_B2_15_EMVSIM1_PD 0x0F4 0x338 0x6A0 0x8 0x0 +#define IOMUXC_GPIO_EMC_B2_15_TMR2_TIMER2 0x0F4 0x338 0x650 0x9 0x0 +#define IOMUXC_GPIO_EMC_B2_15_GPIO8_IO25 0x0F4 0x338 0x0 0xA 0x0 + +#define IOMUXC_GPIO_EMC_B2_16_GPIO8_IO26 0x0F8 0x33C 0x0 0xA 0x0 +#define IOMUXC_GPIO_EMC_B2_16_SEMC_DATA31 0x0F8 0x33C 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B2_16_XBAR1_INOUT14 0x0F8 0x33C 0x0 0x1 0x0 +#define IOMUXC_GPIO_EMC_B2_16_ENET_1G_RX_DATA01 0x0F8 0x33C 0x4D4 0x2 0x0 +#define IOMUXC_GPIO_EMC_B2_16_SAI3_TX_SYNC 0x0F8 0x33C 0x0 0x3 0x0 +#define IOMUXC_GPIO_EMC_B2_16_FLEXSPI2_A_DATA03 0x0F8 0x33C 0x588 0x4 0x0 +#define IOMUXC_GPIO_EMC_B2_16_GPIO_MUX2_IO26 0x0F8 0x33C 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B2_16_EMVSIM1_POWER_FAIL 0x0F8 0x33C 0x6A4 0x8 0x0 +#define IOMUXC_GPIO_EMC_B2_16_TMR2_TIMER3 0x0F8 0x33C 0x0 0x9 0x0 + +#define IOMUXC_GPIO_EMC_B2_17_SEMC_DM03 0x0FC 0x340 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B2_17_XBAR1_INOUT15 0x0FC 0x340 0x0 0x1 0x0 +#define IOMUXC_GPIO_EMC_B2_17_ENET_1G_RX_EN 0x0FC 0x340 0x4E0 0x2 0x0 +#define IOMUXC_GPIO_EMC_B2_17_SAI3_MCLK 0x0FC 0x340 0x0 0x3 0x0 +#define IOMUXC_GPIO_EMC_B2_17_FLEXSPI2_A_DATA04 0x0FC 0x340 0x0 0x4 0x0 +#define IOMUXC_GPIO_EMC_B2_17_GPIO_MUX2_IO27 0x0FC 0x340 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B2_17_WDOG1_ANY 0x0FC 0x340 0x0 0x8 0x0 +#define IOMUXC_GPIO_EMC_B2_17_TMR3_TIMER0 0x0FC 0x340 0x654 0x9 0x1 +#define IOMUXC_GPIO_EMC_B2_17_GPIO8_IO27 0x0FC 0x340 0x0 0xA 0x0 + +#define IOMUXC_GPIO_EMC_B2_18_SEMC_DQS4 0x100 0x344 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B2_18_XBAR1_INOUT16 0x100 0x344 0x0 0x1 0x0 +#define IOMUXC_GPIO_EMC_B2_18_ENET_1G_RX_ER 0x100 0x344 0x4E4 0x2 0x0 +#define IOMUXC_GPIO_EMC_B2_18_EWM_OUT_B 0x100 0x344 0x0 0x3 0x0 +#define IOMUXC_GPIO_EMC_B2_18_FLEXSPI2_A_DATA05 0x100 0x344 0x0 0x4 0x0 +#define IOMUXC_GPIO_EMC_B2_18_GPIO_MUX2_IO28 0x100 0x344 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B2_18_FLEXSPI1_A_DQS 0x100 0x344 0x550 0x6 0x0 +#define IOMUXC_GPIO_EMC_B2_18_WDOG1_B 0x100 0x344 0x0 0x8 0x0 +#define IOMUXC_GPIO_EMC_B2_18_TMR3_TIMER1 0x100 0x344 0x658 0x9 0x1 +#define IOMUXC_GPIO_EMC_B2_18_GPIO8_IO28 0x100 0x344 0x0 0xA 0x0 + +#define IOMUXC_GPIO_EMC_B2_19_GPIO8_IO29 0x104 0x348 0x0 0xA 0x0 +#define IOMUXC_GPIO_EMC_B2_19_SEMC_CLKX00 0x104 0x348 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B2_19_ENET_MDC 0x104 0x348 0x0 0x1 0x0 +#define IOMUXC_GPIO_EMC_B2_19_ENET_1G_MDC 0x104 0x348 0x0 0x2 0x0 +#define IOMUXC_GPIO_EMC_B2_19_ENET_1G_REF_CLK 0x104 0x348 0x4C4 0x3 0x0 +#define IOMUXC_GPIO_EMC_B2_19_FLEXSPI2_A_DATA06 0x104 0x348 0x0 0x4 0x0 +#define IOMUXC_GPIO_EMC_B2_19_GPIO_MUX2_IO29 0x104 0x348 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B2_19_ENET_QOS_MDC 0x104 0x348 0x0 0x8 0x0 +#define IOMUXC_GPIO_EMC_B2_19_TMR3_TIMER2 0x104 0x348 0x65C 0x9 0x0 + +#define IOMUXC_GPIO_EMC_B2_20_GPIO8_IO30 0x108 0x34C 0x0 0xA 0x0 +#define IOMUXC_GPIO_EMC_B2_20_SEMC_CLKX01 0x108 0x34C 0x0 0x0 0x0 +#define IOMUXC_GPIO_EMC_B2_20_ENET_MDIO 0x108 0x34C 0x4AC 0x1 0x0 +#define IOMUXC_GPIO_EMC_B2_20_ENET_1G_MDIO 0x108 0x34C 0x4C8 0x2 0x1 +#define IOMUXC_GPIO_EMC_B2_20_ENET_QOS_REF_CLK 0x108 0x34C 0x4A0 0x3 0x0 +#define IOMUXC_GPIO_EMC_B2_20_FLEXSPI2_A_DATA07 0x108 0x34C 0x0 0x4 0x0 +#define IOMUXC_GPIO_EMC_B2_20_GPIO_MUX2_IO30 0x108 0x34C 0x0 0x5 0x0 +#define IOMUXC_GPIO_EMC_B2_20_ENET_QOS_MDIO 0x108 0x34C 0x4EC 0x8 0x0 +#define IOMUXC_GPIO_EMC_B2_20_TMR3_TIMER3 0x108 0x34C 0x0 0x9 0x0 + +#define IOMUXC_GPIO_AD_00_GPIO8_IO31 0x10C 0x350 0x0 0xA 0x0 +#define IOMUXC_GPIO_AD_00_EMVSIM1_IO 0x10C 0x350 0x69C 0x0 0x1 +#define IOMUXC_GPIO_AD_00_FLEXCAN2_TX 0x10C 0x350 0x0 0x1 0x0 +#define IOMUXC_GPIO_AD_00_ENET_1G_1588_EVENT1_IN 0x10C 0x350 0x0 0x2 0x0 +#define IOMUXC_GPIO_AD_00_GPT2_CAPTURE1 0x10C 0x350 0x0 0x3 0x0 +#define IOMUXC_GPIO_AD_00_FLEXPWM1_PWM0_A 0x10C 0x350 0x500 0x4 0x1 +#define IOMUXC_GPIO_AD_00_GPIO_MUX2_IO31 0x10C 0x350 0x0 0x5 0x0 +#define IOMUXC_GPIO_AD_00_LPUART7_TXD 0x10C 0x350 0x630 0x6 0x0 +#define IOMUXC_GPIO_AD_00_FLEXIO2_D00 0x10C 0x350 0x0 0x8 0x0 +#define IOMUXC_GPIO_AD_00_FLEXSPI2_B_SS1_B 0x10C 0x350 0x0 0x9 0x0 + +#define IOMUXC_GPIO_AD_01_GPIO9_IO00 0x110 0x354 0x0 0xA 0x0 +#define IOMUXC_GPIO_AD_01_EMVSIM1_CLK 0x110 0x354 0x0 0x0 0x0 +#define IOMUXC_GPIO_AD_01_FLEXCAN2_RX 0x110 0x354 0x49C 0x1 0x0 +#define IOMUXC_GPIO_AD_01_ENET_1G_1588_EVENT1_OUT 0x110 0x354 0x0 0x2 0x0 +#define IOMUXC_GPIO_AD_01_GPT2_CAPTURE2 0x110 0x354 0x0 0x3 0x0 +#define IOMUXC_GPIO_AD_01_FLEXPWM1_PWM0_B 0x110 0x354 0x50C 0x4 0x1 +#define IOMUXC_GPIO_AD_01_GPIO_MUX3_IO00 0x110 0x354 0x0 0x5 0x0 +#define IOMUXC_GPIO_AD_01_LPUART7_RXD 0x110 0x354 0x62C 0x6 0x0 +#define IOMUXC_GPIO_AD_01_FLEXIO2_D01 0x110 0x354 0x0 0x8 0x0 +#define IOMUXC_GPIO_AD_01_FLEXSPI2_A_SS1_B 0x110 0x354 0x0 0x9 0x0 + +#define IOMUXC_GPIO_AD_02_GPIO9_IO01 0x114 0x358 0x0 0xA 0x0 +#define IOMUXC_GPIO_AD_02_EMVSIM1_RST 0x114 0x358 0x0 0x0 0x0 +#define IOMUXC_GPIO_AD_02_LPUART7_CTS_B 0x114 0x358 0x0 0x1 0x0 +#define IOMUXC_GPIO_AD_02_ENET_1G_1588_EVENT2_IN 0x114 0x358 0x0 0x2 0x0 +#define IOMUXC_GPIO_AD_02_GPT2_COMPARE1 0x114 0x358 0x0 0x3 0x0 +#define IOMUXC_GPIO_AD_02_FLEXPWM1_PWM1_A 0x114 0x358 0x504 0x4 0x1 +#define IOMUXC_GPIO_AD_02_GPIO_MUX3_IO01 0x114 0x358 0x0 0x5 0x0 +#define IOMUXC_GPIO_AD_02_LPUART8_TXD 0x114 0x358 0x638 0x6 0x0 +#define IOMUXC_GPIO_AD_02_FLEXIO2_D02 0x114 0x358 0x0 0x8 0x0 +#define IOMUXC_GPIO_AD_02_VIDEO_MUX_EXT_DCIC1 0x114 0x358 0x0 0x9 0x0 + +#define IOMUXC_GPIO_AD_03_GPIO9_IO02 0x118 0x35C 0x0 0xA 0x0 +#define IOMUXC_GPIO_AD_03_EMVSIM1_SVEN 0x118 0x35C 0x0 0x0 0x0 +#define IOMUXC_GPIO_AD_03_LPUART7_RTS_B 0x118 0x35C 0x0 0x1 0x0 +#define IOMUXC_GPIO_AD_03_ENET_1G_1588_EVENT2_OUT 0x118 0x35C 0x0 0x2 0x0 +#define IOMUXC_GPIO_AD_03_GPT2_COMPARE2 0x118 0x35C 0x0 0x3 0x0 +#define IOMUXC_GPIO_AD_03_FLEXPWM1_PWM1_B 0x118 0x35C 0x510 0x4 0x1 +#define IOMUXC_GPIO_AD_03_GPIO_MUX3_IO02 0x118 0x35C 0x0 0x5 0x0 +#define IOMUXC_GPIO_AD_03_LPUART8_RXD 0x118 0x35C 0x634 0x6 0x0 +#define IOMUXC_GPIO_AD_03_FLEXIO2_D03 0x118 0x35C 0x0 0x8 0x0 +#define IOMUXC_GPIO_AD_03_VIDEO_MUX_EXT_DCIC2 0x118 0x35C 0x0 0x9 0x0 + +#define IOMUXC_GPIO_AD_04_EMVSIM1_PD 0x11C 0x360 0x6A0 0x0 0x1 +#define IOMUXC_GPIO_AD_04_LPUART8_CTS_B 0x11C 0x360 0x0 0x1 0x0 +#define IOMUXC_GPIO_AD_04_ENET_1G_1588_EVENT3_IN 0x11C 0x360 0x0 0x2 0x0 +#define IOMUXC_GPIO_AD_04_GPT2_COMPARE3 0x11C 0x360 0x0 0x3 0x0 +#define IOMUXC_GPIO_AD_04_FLEXPWM1_PWM2_A 0x11C 0x360 0x508 0x4 0x1 +#define IOMUXC_GPIO_AD_04_GPIO_MUX3_IO03 0x11C 0x360 0x0 0x5 0x0 +#define IOMUXC_GPIO_AD_04_WDOG1_B 0x11C 0x360 0x0 0x6 0x0 +#define IOMUXC_GPIO_AD_04_FLEXIO2_D04 0x11C 0x360 0x0 0x8 0x0 +#define IOMUXC_GPIO_AD_04_TMR4_TIMER0 0x11C 0x360 0x660 0x9 0x1 +#define IOMUXC_GPIO_AD_04_GPIO9_IO03 0x11C 0x360 0x0 0xA 0x0 + +#define IOMUXC_GPIO_AD_05_EMVSIM1_POWER_FAIL 0x120 0x364 0x6A4 0x0 0x1 +#define IOMUXC_GPIO_AD_05_LPUART8_RTS_B 0x120 0x364 0x0 0x1 0x0 +#define IOMUXC_GPIO_AD_05_ENET_1G_1588_EVENT3_OUT 0x120 0x364 0x0 0x2 0x0 +#define IOMUXC_GPIO_AD_05_GPT2_CLK 0x120 0x364 0x0 0x3 0x0 +#define IOMUXC_GPIO_AD_05_FLEXPWM1_PWM2_B 0x120 0x364 0x514 0x4 0x1 +#define IOMUXC_GPIO_AD_05_GPIO_MUX3_IO04 0x120 0x364 0x0 0x5 0x0 +#define IOMUXC_GPIO_AD_05_WDOG2_B 0x120 0x364 0x0 0x6 0x0 +#define IOMUXC_GPIO_AD_05_FLEXIO2_D05 0x120 0x364 0x0 0x8 0x0 +#define IOMUXC_GPIO_AD_05_TMR4_TIMER1 0x120 0x364 0x664 0x9 0x1 +#define IOMUXC_GPIO_AD_05_GPIO9_IO04 0x120 0x364 0x0 0xA 0x0 + +#define IOMUXC_GPIO_AD_06_USB_OTG2_OC 0x124 0x368 0x6B8 0x0 0x0 +#define IOMUXC_GPIO_AD_06_FLEXCAN1_TX 0x124 0x368 0x0 0x1 0x0 +#define IOMUXC_GPIO_AD_06_EMVSIM2_IO 0x124 0x368 0x6A8 0x2 0x0 +#define IOMUXC_GPIO_AD_06_GPT3_CAPTURE1 0x124 0x368 0x590 0x3 0x1 +#define IOMUXC_GPIO_AD_06_VIDEO_MUX_CSI_DATA15 0x124 0x368 0x0 0x4 0x0 +#define IOMUXC_GPIO_AD_06_GPIO_MUX3_IO05 0x124 0x368 0x0 0x5 0x0 +#define IOMUXC_GPIO_AD_06_ENET_1588_EVENT1_IN 0x124 0x368 0x0 0x6 0x0 +#define IOMUXC_GPIO_AD_06_FLEXIO2_D06 0x124 0x368 0x0 0x8 0x0 +#define IOMUXC_GPIO_AD_06_TMR4_TIMER2 0x124 0x368 0x668 0x9 0x0 +#define IOMUXC_GPIO_AD_06_GPIO9_IO05 0x124 0x368 0x0 0xA 0x0 +#define IOMUXC_GPIO_AD_06_FLEXPWM1_PWM0_X 0x124 0x368 0x0 0xB 0x0 + +#define IOMUXC_GPIO_AD_07_USB_OTG2_PWR 0x128 0x36C 0x0 0x0 0x0 +#define IOMUXC_GPIO_AD_07_FLEXCAN1_RX 0x128 0x36C 0x498 0x1 0x0 +#define IOMUXC_GPIO_AD_07_EMVSIM2_CLK 0x128 0x36C 0x0 0x2 0x0 +#define IOMUXC_GPIO_AD_07_GPT3_CAPTURE2 0x128 0x36C 0x594 0x3 0x1 +#define IOMUXC_GPIO_AD_07_VIDEO_MUX_CSI_DATA14 0x128 0x36C 0x0 0x4 0x0 +#define IOMUXC_GPIO_AD_07_GPIO_MUX3_IO06 0x128 0x36C 0x0 0x5 0x0 +#define IOMUXC_GPIO_AD_07_ENET_1588_EVENT1_OUT 0x128 0x36C 0x0 0x6 0x0 +#define IOMUXC_GPIO_AD_07_FLEXIO2_D07 0x128 0x36C 0x0 0x8 0x0 +#define IOMUXC_GPIO_AD_07_TMR4_TIMER3 0x128 0x36C 0x0 0x9 0x0 +#define IOMUXC_GPIO_AD_07_GPIO9_IO06 0x128 0x36C 0x0 0xA 0x0 +#define IOMUXC_GPIO_AD_07_FLEXPWM1_PWM1_X 0x128 0x36C 0x0 0xB 0x0 + +#define IOMUXC_GPIO_AD_08_USBPHY2_OTG_ID 0x12C 0x370 0x6C4 0x0 0x0 +#define IOMUXC_GPIO_AD_08_LPI2C1_SCL 0x12C 0x370 0x5AC 0x1 0x0 +#define IOMUXC_GPIO_AD_08_EMVSIM2_RST 0x12C 0x370 0x0 0x2 0x0 +#define IOMUXC_GPIO_AD_08_GPT3_COMPARE1 0x12C 0x370 0x0 0x3 0x0 +#define IOMUXC_GPIO_AD_08_VIDEO_MUX_CSI_DATA13 0x12C 0x370 0x0 0x4 0x0 +#define IOMUXC_GPIO_AD_08_GPIO_MUX3_IO07 0x12C 0x370 0x0 0x5 0x0 +#define IOMUXC_GPIO_AD_08_ENET_1588_EVENT2_IN 0x12C 0x370 0x0 0x6 0x0 +#define IOMUXC_GPIO_AD_08_FLEXIO2_D08 0x12C 0x370 0x0 0x8 0x0 +#define IOMUXC_GPIO_AD_08_GPIO9_IO07 0x12C 0x370 0x0 0xA 0x0 +#define IOMUXC_GPIO_AD_08_FLEXPWM1_PWM2_X 0x12C 0x370 0x0 0xB 0x0 + +#define IOMUXC_GPIO_AD_09_USBPHY1_OTG_ID 0x130 0x374 0x6C0 0x0 0x0 +#define IOMUXC_GPIO_AD_09_LPI2C1_SDA 0x130 0x374 0x5B0 0x1 0x0 +#define IOMUXC_GPIO_AD_09_EMVSIM2_SVEN 0x130 0x374 0x0 0x2 0x0 +#define IOMUXC_GPIO_AD_09_GPT3_COMPARE2 0x130 0x374 0x0 0x3 0x0 +#define IOMUXC_GPIO_AD_09_VIDEO_MUX_CSI_DATA12 0x130 0x374 0x0 0x4 0x0 +#define IOMUXC_GPIO_AD_09_GPIO_MUX3_IO08 0x130 0x374 0x0 0x5 0x0 +#define IOMUXC_GPIO_AD_09_ENET_1588_EVENT2_OUT 0x130 0x374 0x0 0x6 0x0 +#define IOMUXC_GPIO_AD_09_FLEXIO2_D09 0x130 0x374 0x0 0x8 0x0 +#define IOMUXC_GPIO_AD_09_GPIO9_IO08 0x130 0x374 0x0 0xA 0x0 +#define IOMUXC_GPIO_AD_09_FLEXPWM1_PWM3_X 0x130 0x374 0x0 0xB 0x0 + +#define IOMUXC_GPIO_AD_10_USB_OTG1_PWR 0x134 0x378 0x0 0x0 0x0 +#define IOMUXC_GPIO_AD_10_LPI2C1_SCLS 0x134 0x378 0x0 0x1 0x0 +#define IOMUXC_GPIO_AD_10_EMVSIM2_PD 0x134 0x378 0x6AC 0x2 0x0 +#define IOMUXC_GPIO_AD_10_GPT3_COMPARE3 0x134 0x378 0x0 0x3 0x0 +#define IOMUXC_GPIO_AD_10_VIDEO_MUX_CSI_DATA11 0x134 0x378 0x0 0x4 0x0 +#define IOMUXC_GPIO_AD_10_GPIO_MUX3_IO09 0x134 0x378 0x0 0x5 0x0 +#define IOMUXC_GPIO_AD_10_ENET_1588_EVENT3_IN 0x134 0x378 0x0 0x6 0x0 +#define IOMUXC_GPIO_AD_10_FLEXIO2_D10 0x134 0x378 0x0 0x8 0x0 +#define IOMUXC_GPIO_AD_10_GPIO9_IO09 0x134 0x378 0x0 0xA 0x0 +#define IOMUXC_GPIO_AD_10_FLEXPWM2_PWM0_X 0x134 0x378 0x0 0xB 0x0 + +#define IOMUXC_GPIO_AD_11_USB_OTG1_OC 0x138 0x37C 0x6BC 0x0 0x0 +#define IOMUXC_GPIO_AD_11_LPI2C1_SDAS 0x138 0x37C 0x0 0x1 0x0 +#define IOMUXC_GPIO_AD_11_EMVSIM2_POWER_FAIL 0x138 0x37C 0x6B0 0x2 0x0 +#define IOMUXC_GPIO_AD_11_GPT3_CLK 0x138 0x37C 0x598 0x3 0x1 +#define IOMUXC_GPIO_AD_11_VIDEO_MUX_CSI_DATA10 0x138 0x37C 0x0 0x4 0x0 +#define IOMUXC_GPIO_AD_11_GPIO_MUX3_IO10 0x138 0x37C 0x0 0x5 0x0 +#define IOMUXC_GPIO_AD_11_ENET_1588_EVENT3_OUT 0x138 0x37C 0x0 0x6 0x0 +#define IOMUXC_GPIO_AD_11_FLEXIO2_D11 0x138 0x37C 0x0 0x8 0x0 +#define IOMUXC_GPIO_AD_11_GPIO9_IO10 0x138 0x37C 0x0 0xA 0x0 +#define IOMUXC_GPIO_AD_11_FLEXPWM2_PWM1_X 0x138 0x37C 0x0 0xB 0x0 + +#define IOMUXC_GPIO_AD_12_SPDIF_LOCK 0x13C 0x380 0x0 0x0 0x0 +#define IOMUXC_GPIO_AD_12_LPI2C1_HREQ 0x13C 0x380 0x0 0x1 0x0 +#define IOMUXC_GPIO_AD_12_GPT1_CAPTURE1 0x13C 0x380 0x0 0x2 0x0 +#define IOMUXC_GPIO_AD_12_FLEXSPI1_B_DATA03 0x13C 0x380 0x570 0x3 0x0 +#define IOMUXC_GPIO_AD_12_VIDEO_MUX_CSI_PIXCLK 0x13C 0x380 0x0 0x4 0x0 +#define IOMUXC_GPIO_AD_12_GPIO_MUX3_IO11 0x13C 0x380 0x0 0x5 0x0 +#define IOMUXC_GPIO_AD_12_ENET_TX_DATA03 0x13C 0x380 0x0 0x6 0x0 +#define IOMUXC_GPIO_AD_12_FLEXIO2_D12 0x13C 0x380 0x0 0x8 0x0 +#define IOMUXC_GPIO_AD_12_EWM_OUT_B 0x13C 0x380 0x0 0x9 0x0 +#define IOMUXC_GPIO_AD_12_GPIO9_IO11 0x13C 0x380 0x0 0xA 0x0 +#define IOMUXC_GPIO_AD_12_FLEXPWM2_PWM2_X 0x13C 0x380 0x0 0xB 0x0 + +#define IOMUXC_GPIO_AD_13_SPDIF_SR_CLK 0x140 0x384 0x0 0x0 0x0 +#define IOMUXC_GPIO_AD_13_PIT1_TRIGGER0 0x140 0x384 0x0 0x1 0x0 +#define IOMUXC_GPIO_AD_13_GPT1_CAPTURE2 0x140 0x384 0x0 0x2 0x0 +#define IOMUXC_GPIO_AD_13_FLEXSPI1_B_DATA02 0x140 0x384 0x56C 0x3 0x0 +#define IOMUXC_GPIO_AD_13_VIDEO_MUX_CSI_MCLK 0x140 0x384 0x0 0x4 0x0 +#define IOMUXC_GPIO_AD_13_GPIO_MUX3_IO12 0x140 0x384 0x0 0x5 0x0 +#define IOMUXC_GPIO_AD_13_ENET_TX_DATA02 0x140 0x384 0x0 0x6 0x0 +#define IOMUXC_GPIO_AD_13_FLEXIO2_D13 0x140 0x384 0x0 0x8 0x0 +#define IOMUXC_GPIO_AD_13_REF_CLK_32K 0x140 0x384 0x0 0x9 0x0 +#define IOMUXC_GPIO_AD_13_GPIO9_IO12 0x140 0x384 0x0 0xA 0x0 +#define IOMUXC_GPIO_AD_13_FLEXPWM2_PWM3_X 0x140 0x384 0x0 0xB 0x0 + +#define IOMUXC_GPIO_AD_14_SPDIF_EXT_CLK 0x144 0x388 0x0 0x0 0x0 +#define IOMUXC_GPIO_AD_14_REF_CLK_24M 0x144 0x388 0x0 0x1 0x0 +#define IOMUXC_GPIO_AD_14_GPT1_COMPARE1 0x144 0x388 0x0 0x2 0x0 +#define IOMUXC_GPIO_AD_14_FLEXSPI1_B_DATA01 0x144 0x388 0x568 0x3 0x0 +#define IOMUXC_GPIO_AD_14_VIDEO_MUX_CSI_VSYNC 0x144 0x388 0x0 0x4 0x0 +#define IOMUXC_GPIO_AD_14_GPIO_MUX3_IO13 0x144 0x388 0x0 0x5 0x0 +#define IOMUXC_GPIO_AD_14_ENET_RX_CLK 0x144 0x388 0x0 0x6 0x0 +#define IOMUXC_GPIO_AD_14_FLEXIO2_D14 0x144 0x388 0x0 0x8 0x0 +#define IOMUXC_GPIO_AD_14_CCM_ENET_REF_CLK_25M 0x144 0x388 0x0 0x9 0x0 +#define IOMUXC_GPIO_AD_14_GPIO9_IO13 0x144 0x388 0x0 0xA 0x0 +#define IOMUXC_GPIO_AD_14_FLEXPWM3_PWM0_X 0x144 0x388 0x0 0xB 0x0 + +#define IOMUXC_GPIO_AD_15_GPIO9_IO14 0x148 0x38C 0x0 0xA 0x0 +#define IOMUXC_GPIO_AD_15_FLEXPWM3_PWM1_X 0x148 0x38C 0x0 0xB 0x0 +#define IOMUXC_GPIO_AD_15_SPDIF_IN 0x148 0x38C 0x6B4 0x0 0x1 +#define IOMUXC_GPIO_AD_15_LPUART10_TXD 0x148 0x38C 0x628 0x1 0x0 +#define IOMUXC_GPIO_AD_15_GPT1_COMPARE2 0x148 0x38C 0x0 0x2 0x0 +#define IOMUXC_GPIO_AD_15_FLEXSPI1_B_DATA00 0x148 0x38C 0x564 0x3 0x0 +#define IOMUXC_GPIO_AD_15_VIDEO_MUX_CSI_HSYNC 0x148 0x38C 0x0 0x4 0x0 +#define IOMUXC_GPIO_AD_15_GPIO_MUX3_IO14 0x148 0x38C 0x0 0x5 0x0 +#define IOMUXC_GPIO_AD_15_ENET_TX_ER 0x148 0x38C 0x0 0x6 0x0 +#define IOMUXC_GPIO_AD_15_FLEXIO2_D15 0x148 0x38C 0x0 0x8 0x0 + +#define IOMUXC_GPIO_AD_16_SPDIF_OUT 0x14C 0x390 0x0 0x0 0x0 +#define IOMUXC_GPIO_AD_16_LPUART10_RXD 0x14C 0x390 0x624 0x1 0x0 +#define IOMUXC_GPIO_AD_16_GPT1_COMPARE3 0x14C 0x390 0x0 0x2 0x0 +#define IOMUXC_GPIO_AD_16_FLEXSPI1_B_SCLK 0x14C 0x390 0x578 0x3 0x0 +#define IOMUXC_GPIO_AD_16_VIDEO_MUX_CSI_DATA09 0x14C 0x390 0x0 0x4 0x0 +#define IOMUXC_GPIO_AD_16_GPIO_MUX3_IO15 0x14C 0x390 0x0 0x5 0x0 +#define IOMUXC_GPIO_AD_16_ENET_RX_DATA03 0x14C 0x390 0x0 0x6 0x0 +#define IOMUXC_GPIO_AD_16_FLEXIO2_D16 0x14C 0x390 0x0 0x8 0x0 +#define IOMUXC_GPIO_AD_16_ENET_1G_MDC 0x14C 0x390 0x0 0x9 0x0 +#define IOMUXC_GPIO_AD_16_GPIO9_IO15 0x14C 0x390 0x0 0xA 0x0 +#define IOMUXC_GPIO_AD_16_FLEXPWM3_PWM2_X 0x14C 0x390 0x0 0xB 0x0 + +#define IOMUXC_GPIO_AD_17_SAI1_MCLK 0x150 0x394 0x66C 0x0 0x0 +#define IOMUXC_GPIO_AD_17_ACMP1_OUT 0x150 0x394 0x0 0x1 0x0 +#define IOMUXC_GPIO_AD_17_GPT1_CLK 0x150 0x394 0x0 0x2 0x0 +#define IOMUXC_GPIO_AD_17_FLEXSPI1_A_DQS 0x150 0x394 0x550 0x3 0x1 +#define IOMUXC_GPIO_AD_17_VIDEO_MUX_CSI_DATA08 0x150 0x394 0x0 0x4 0x0 +#define IOMUXC_GPIO_AD_17_GPIO_MUX3_IO16 0x150 0x394 0x0 0x5 0x0 +#define IOMUXC_GPIO_AD_17_ENET_RX_DATA02 0x150 0x394 0x0 0x6 0x0 +#define IOMUXC_GPIO_AD_17_FLEXIO2_D17 0x150 0x394 0x0 0x8 0x0 +#define IOMUXC_GPIO_AD_17_ENET_1G_MDIO 0x150 0x394 0x4C8 0x9 0x2 +#define IOMUXC_GPIO_AD_17_GPIO9_IO16 0x150 0x394 0x0 0xA 0x0 +#define IOMUXC_GPIO_AD_17_FLEXPWM3_PWM3_X 0x150 0x394 0x0 0xB 0x0 + +#define IOMUXC_GPIO_AD_18_GPIO9_IO17 0x154 0x398 0x0 0xA 0x0 +#define IOMUXC_GPIO_AD_18_FLEXPWM4_PWM0_X 0x154 0x398 0x0 0xB 0x0 +#define IOMUXC_GPIO_AD_18_SAI1_RX_SYNC 0x154 0x398 0x678 0x0 0x0 +#define IOMUXC_GPIO_AD_18_ACMP2_OUT 0x154 0x398 0x0 0x1 0x0 +#define IOMUXC_GPIO_AD_18_LPSPI1_PCS1 0x154 0x398 0x0 0x2 0x0 +#define IOMUXC_GPIO_AD_18_FLEXSPI1_A_SS0_B 0x154 0x398 0x0 0x3 0x0 +#define IOMUXC_GPIO_AD_18_VIDEO_MUX_CSI_DATA07 0x154 0x398 0x0 0x4 0x0 +#define IOMUXC_GPIO_AD_18_GPIO_MUX3_IO17 0x154 0x398 0x0 0x5 0x0 +#define IOMUXC_GPIO_AD_18_ENET_CRS 0x154 0x398 0x0 0x6 0x0 +#define IOMUXC_GPIO_AD_18_FLEXIO2_D18 0x154 0x398 0x0 0x8 0x0 +#define IOMUXC_GPIO_AD_18_LPI2C2_SCL 0x154 0x398 0x5B4 0x9 0x1 + +#define IOMUXC_GPIO_AD_19_SAI1_RX_BCLK 0x158 0x39C 0x670 0x0 0x0 +#define IOMUXC_GPIO_AD_19_ACMP3_OUT 0x158 0x39C 0x0 0x1 0x0 +#define IOMUXC_GPIO_AD_19_LPSPI1_PCS2 0x158 0x39C 0x0 0x2 0x0 +#define IOMUXC_GPIO_AD_19_FLEXSPI1_A_SCLK 0x158 0x39C 0x574 0x3 0x0 +#define IOMUXC_GPIO_AD_19_VIDEO_MUX_CSI_DATA06 0x158 0x39C 0x0 0x4 0x0 +#define IOMUXC_GPIO_AD_19_GPIO_MUX3_IO18 0x158 0x39C 0x0 0x5 0x0 +#define IOMUXC_GPIO_AD_19_ENET_COL 0x158 0x39C 0x0 0x6 0x0 +#define IOMUXC_GPIO_AD_19_FLEXIO2_D19 0x158 0x39C 0x0 0x8 0x0 +#define IOMUXC_GPIO_AD_19_LPI2C2_SDA 0x158 0x39C 0x5B8 0x9 0x1 +#define IOMUXC_GPIO_AD_19_GPIO9_IO18 0x158 0x39C 0x0 0xA 0x0 +#define IOMUXC_GPIO_AD_19_FLEXPWM4_PWM1_X 0x158 0x39C 0x0 0xB 0x0 + +#define IOMUXC_GPIO_AD_20_SAI1_RX_DATA00 0x15C 0x3A0 0x674 0x0 0x0 +#define IOMUXC_GPIO_AD_20_ACMP4_OUT 0x15C 0x3A0 0x0 0x1 0x0 +#define IOMUXC_GPIO_AD_20_LPSPI1_PCS3 0x15C 0x3A0 0x0 0x2 0x0 +#define IOMUXC_GPIO_AD_20_FLEXSPI1_A_DATA00 0x15C 0x3A0 0x554 0x3 0x0 +#define IOMUXC_GPIO_AD_20_VIDEO_MUX_CSI_DATA05 0x15C 0x3A0 0x0 0x4 0x0 +#define IOMUXC_GPIO_AD_20_GPIO_MUX3_IO19 0x15C 0x3A0 0x0 0x5 0x0 +#define IOMUXC_GPIO_AD_20_KPP_ROW07 0x15C 0x3A0 0x5A8 0x6 0x0 +#define IOMUXC_GPIO_AD_20_FLEXIO2_D20 0x15C 0x3A0 0x0 0x8 0x0 +#define IOMUXC_GPIO_AD_20_ENET_QOS_1588_EVENT2_OUT 0x15C 0x3A0 0x0 0x9 0x0 +#define IOMUXC_GPIO_AD_20_GPIO9_IO19 0x15C 0x3A0 0x0 0xA 0x0 +#define IOMUXC_GPIO_AD_20_FLEXPWM4_PWM2_X 0x15C 0x3A0 0x0 0xB 0x0 + +#define IOMUXC_GPIO_AD_21_SAI1_TX_DATA00 0x160 0x3A4 0x0 0x0 0x0 +#define IOMUXC_GPIO_AD_21_LPSPI2_PCS1 0x160 0x3A4 0x5E0 0x2 0x0 +#define IOMUXC_GPIO_AD_21_FLEXSPI1_A_DATA01 0x160 0x3A4 0x558 0x3 0x0 +#define IOMUXC_GPIO_AD_21_VIDEO_MUX_CSI_DATA04 0x160 0x3A4 0x0 0x4 0x0 +#define IOMUXC_GPIO_AD_21_GPIO_MUX3_IO20 0x160 0x3A4 0x0 0x5 0x0 +#define IOMUXC_GPIO_AD_21_KPP_COL07 0x160 0x3A4 0x5A0 0x6 0x0 +#define IOMUXC_GPIO_AD_21_FLEXIO2_D21 0x160 0x3A4 0x0 0x8 0x0 +#define IOMUXC_GPIO_AD_21_ENET_QOS_1588_EVENT2_IN 0x160 0x3A4 0x0 0x9 0x0 +#define IOMUXC_GPIO_AD_21_GPIO9_IO20 0x160 0x3A4 0x0 0xA 0x0 +#define IOMUXC_GPIO_AD_21_FLEXPWM4_PWM3_X 0x160 0x3A4 0x0 0xB 0x0 + +#define IOMUXC_GPIO_AD_22_GPIO9_IO21 0x164 0x3A8 0x0 0xA 0x0 +#define IOMUXC_GPIO_AD_22_SAI1_TX_BCLK 0x164 0x3A8 0x67C 0x0 0x0 +#define IOMUXC_GPIO_AD_22_LPSPI2_PCS2 0x164 0x3A8 0x0 0x2 0x0 +#define IOMUXC_GPIO_AD_22_FLEXSPI1_A_DATA02 0x164 0x3A8 0x55C 0x3 0x0 +#define IOMUXC_GPIO_AD_22_VIDEO_MUX_CSI_DATA03 0x164 0x3A8 0x0 0x4 0x0 +#define IOMUXC_GPIO_AD_22_GPIO_MUX3_IO21 0x164 0x3A8 0x0 0x5 0x0 +#define IOMUXC_GPIO_AD_22_KPP_ROW06 0x164 0x3A8 0x5A4 0x6 0x0 +#define IOMUXC_GPIO_AD_22_FLEXIO2_D22 0x164 0x3A8 0x0 0x8 0x0 +#define IOMUXC_GPIO_AD_22_ENET_QOS_1588_EVENT3_OUT 0x164 0x3A8 0x0 0x9 0x0 + +#define IOMUXC_GPIO_AD_23_SAI1_TX_SYNC 0x168 0x3AC 0x680 0x0 0x0 +#define IOMUXC_GPIO_AD_23_LPSPI2_PCS3 0x168 0x3AC 0x0 0x2 0x0 +#define IOMUXC_GPIO_AD_23_FLEXSPI1_A_DATA03 0x168 0x3AC 0x560 0x3 0x0 +#define IOMUXC_GPIO_AD_23_VIDEO_MUX_CSI_DATA02 0x168 0x3AC 0x0 0x4 0x0 +#define IOMUXC_GPIO_AD_23_GPIO_MUX3_IO22 0x168 0x3AC 0x0 0x5 0x0 +#define IOMUXC_GPIO_AD_23_KPP_COL06 0x168 0x3AC 0x59C 0x6 0x0 +#define IOMUXC_GPIO_AD_23_FLEXIO2_D23 0x168 0x3AC 0x0 0x8 0x0 +#define IOMUXC_GPIO_AD_23_ENET_QOS_1588_EVENT3_IN 0x168 0x3AC 0x0 0x9 0x0 +#define IOMUXC_GPIO_AD_23_GPIO9_IO22 0x168 0x3AC 0x0 0xA 0x0 + +#define IOMUXC_GPIO_AD_24_LPUART1_TXD 0x16C 0x3B0 0x620 0x0 0x0 +#define IOMUXC_GPIO_AD_24_LPSPI2_SCK 0x16C 0x3B0 0x5E4 0x1 0x0 +#define IOMUXC_GPIO_AD_24_VIDEO_MUX_CSI_DATA00 0x16C 0x3B0 0x0 0x2 0x0 +#define IOMUXC_GPIO_AD_24_ENET_RX_EN 0x16C 0x3B0 0x4B8 0x3 0x0 +#define IOMUXC_GPIO_AD_24_FLEXPWM2_PWM0_A 0x16C 0x3B0 0x518 0x4 0x1 +#define IOMUXC_GPIO_AD_24_GPIO_MUX3_IO23 0x16C 0x3B0 0x0 0x5 0x0 +#define IOMUXC_GPIO_AD_24_KPP_ROW05 0x16C 0x3B0 0x0 0x6 0x0 +#define IOMUXC_GPIO_AD_24_FLEXIO2_D24 0x16C 0x3B0 0x0 0x8 0x0 +#define IOMUXC_GPIO_AD_24_LPI2C4_SCL 0x16C 0x3B0 0x5C4 0x9 0x0 +#define IOMUXC_GPIO_AD_24_GPIO9_IO23 0x16C 0x3B0 0x0 0xA 0x0 + +#define IOMUXC_GPIO_AD_25_GPIO9_IO24 0x170 0x3B4 0x0 0xA 0x0 +#define IOMUXC_GPIO_AD_25_LPUART1_RXD 0x170 0x3B4 0x61C 0x0 0x0 +#define IOMUXC_GPIO_AD_25_LPSPI2_PCS0 0x170 0x3B4 0x5DC 0x1 0x0 +#define IOMUXC_GPIO_AD_25_VIDEO_MUX_CSI_DATA01 0x170 0x3B4 0x0 0x2 0x0 +#define IOMUXC_GPIO_AD_25_ENET_RX_ER 0x170 0x3B4 0x4BC 0x3 0x0 +#define IOMUXC_GPIO_AD_25_FLEXPWM2_PWM0_B 0x170 0x3B4 0x524 0x4 0x1 +#define IOMUXC_GPIO_AD_25_GPIO_MUX3_IO24 0x170 0x3B4 0x0 0x5 0x0 +#define IOMUXC_GPIO_AD_25_KPP_COL05 0x170 0x3B4 0x0 0x6 0x0 +#define IOMUXC_GPIO_AD_25_FLEXIO2_D25 0x170 0x3B4 0x0 0x8 0x0 +#define IOMUXC_GPIO_AD_25_LPI2C4_SDA 0x170 0x3B4 0x5C8 0x9 0x0 + +#define IOMUXC_GPIO_AD_26_LPUART1_CTS_B 0x174 0x3B8 0x0 0x0 0x0 +#define IOMUXC_GPIO_AD_26_LPSPI2_SOUT 0x174 0x3B8 0x5EC 0x1 0x0 +#define IOMUXC_GPIO_AD_26_SEMC_CSX01 0x174 0x3B8 0x0 0x2 0x0 +#define IOMUXC_GPIO_AD_26_ENET_RX_DATA00 0x174 0x3B8 0x4B0 0x3 0x0 +#define IOMUXC_GPIO_AD_26_FLEXPWM2_PWM1_A 0x174 0x3B8 0x51C 0x4 0x1 +#define IOMUXC_GPIO_AD_26_GPIO_MUX3_IO25 0x174 0x3B8 0x0 0x5 0x0 +#define IOMUXC_GPIO_AD_26_KPP_ROW04 0x174 0x3B8 0x0 0x6 0x0 +#define IOMUXC_GPIO_AD_26_FLEXIO2_D26 0x174 0x3B8 0x0 0x8 0x0 +#define IOMUXC_GPIO_AD_26_ENET_QOS_MDC 0x174 0x3B8 0x0 0x9 0x0 +#define IOMUXC_GPIO_AD_26_GPIO9_IO25 0x174 0x3B8 0x0 0xA 0x0 +#define IOMUXC_GPIO_AD_26_USDHC2_CD_B 0x174 0x3B8 0x6D0 0xB 0x1 + +#define IOMUXC_GPIO_AD_27_LPUART1_RTS_B 0x178 0x3BC 0x0 0x0 0x0 +#define IOMUXC_GPIO_AD_27_LPSPI2_SIN 0x178 0x3BC 0x5E8 0x1 0x0 +#define IOMUXC_GPIO_AD_27_SEMC_CSX02 0x178 0x3BC 0x0 0x2 0x0 +#define IOMUXC_GPIO_AD_27_ENET_RX_DATA01 0x178 0x3BC 0x4B4 0x3 0x0 +#define IOMUXC_GPIO_AD_27_FLEXPWM2_PWM1_B 0x178 0x3BC 0x528 0x4 0x1 +#define IOMUXC_GPIO_AD_27_GPIO_MUX3_IO26 0x178 0x3BC 0x0 0x5 0x0 +#define IOMUXC_GPIO_AD_27_KPP_COL04 0x178 0x3BC 0x0 0x6 0x0 +#define IOMUXC_GPIO_AD_27_FLEXIO2_D27 0x178 0x3BC 0x0 0x8 0x0 +#define IOMUXC_GPIO_AD_27_ENET_QOS_MDIO 0x178 0x3BC 0x4EC 0x9 0x1 +#define IOMUXC_GPIO_AD_27_GPIO9_IO26 0x178 0x3BC 0x0 0xA 0x0 +#define IOMUXC_GPIO_AD_27_USDHC2_WP 0x178 0x3BC 0x6D4 0xB 0x1 + +#define IOMUXC_GPIO_AD_28_GPIO9_IO27 0x17C 0x3C0 0x0 0xA 0x0 +#define IOMUXC_GPIO_AD_28_USDHC2_VSELECT 0x17C 0x3C0 0x0 0xB 0x0 +#define IOMUXC_GPIO_AD_28_LPSPI1_SCK 0x17C 0x3C0 0x5D0 0x0 0x1 +#define IOMUXC_GPIO_AD_28_LPUART5_TXD 0x17C 0x3C0 0x0 0x1 0x0 +#define IOMUXC_GPIO_AD_28_SEMC_CSX03 0x17C 0x3C0 0x0 0x2 0x0 +#define IOMUXC_GPIO_AD_28_ENET_TX_EN 0x17C 0x3C0 0x0 0x3 0x0 +#define IOMUXC_GPIO_AD_28_FLEXPWM2_PWM2_A 0x17C 0x3C0 0x520 0x4 0x1 +#define IOMUXC_GPIO_AD_28_GPIO_MUX3_IO27 0x17C 0x3C0 0x0 0x5 0x0 +#define IOMUXC_GPIO_AD_28_KPP_ROW03 0x17C 0x3C0 0x0 0x6 0x0 +#define IOMUXC_GPIO_AD_28_FLEXIO2_D28 0x17C 0x3C0 0x0 0x8 0x0 +#define IOMUXC_GPIO_AD_28_VIDEO_MUX_EXT_DCIC1 0x17C 0x3C0 0x0 0x9 0x0 + +#define IOMUXC_GPIO_AD_29_LPSPI1_PCS0 0x180 0x3C4 0x5CC 0x0 0x1 +#define IOMUXC_GPIO_AD_29_LPUART5_RXD 0x180 0x3C4 0x0 0x1 0x0 +#define IOMUXC_GPIO_AD_29_ENET_REF_CLK 0x180 0x3C4 0x4A8 0x2 0x0 +#define IOMUXC_GPIO_AD_29_ENET_TX_CLK 0x180 0x3C4 0x4C0 0x3 0x0 +#define IOMUXC_GPIO_AD_29_FLEXPWM2_PWM2_B 0x180 0x3C4 0x52C 0x4 0x1 +#define IOMUXC_GPIO_AD_29_GPIO_MUX3_IO28 0x180 0x3C4 0x0 0x5 0x0 +#define IOMUXC_GPIO_AD_29_KPP_COL03 0x180 0x3C4 0x0 0x6 0x0 +#define IOMUXC_GPIO_AD_29_FLEXIO2_D29 0x180 0x3C4 0x0 0x8 0x0 +#define IOMUXC_GPIO_AD_29_VIDEO_MUX_EXT_DCIC2 0x180 0x3C4 0x0 0x9 0x0 +#define IOMUXC_GPIO_AD_29_GPIO9_IO28 0x180 0x3C4 0x0 0xA 0x0 +#define IOMUXC_GPIO_AD_29_USDHC2_RESET_B 0x180 0x3C4 0x0 0xB 0x0 + +#define IOMUXC_GPIO_AD_30_LPSPI1_SOUT 0x184 0x3C8 0x5D8 0x0 0x1 +#define IOMUXC_GPIO_AD_30_USB_OTG2_OC 0x184 0x3C8 0x6B8 0x1 0x1 +#define IOMUXC_GPIO_AD_30_FLEXCAN2_TX 0x184 0x3C8 0x0 0x2 0x0 +#define IOMUXC_GPIO_AD_30_ENET_TX_DATA00 0x184 0x3C8 0x0 0x3 0x0 +#define IOMUXC_GPIO_AD_30_LPUART3_TXD 0x184 0x3C8 0x0 0x4 0x0 +#define IOMUXC_GPIO_AD_30_GPIO_MUX3_IO29 0x184 0x3C8 0x0 0x5 0x0 +#define IOMUXC_GPIO_AD_30_KPP_ROW02 0x184 0x3C8 0x0 0x6 0x0 +#define IOMUXC_GPIO_AD_30_FLEXIO2_D30 0x184 0x3C8 0x0 0x8 0x0 +#define IOMUXC_GPIO_AD_30_WDOG2_RESET_B_DEB 0x184 0x3C8 0x0 0x9 0x0 +#define IOMUXC_GPIO_AD_30_GPIO9_IO29 0x184 0x3C8 0x0 0xA 0x0 + +#define IOMUXC_GPIO_AD_31_LPSPI1_SIN 0x188 0x3CC 0x5D4 0x0 0x1 +#define IOMUXC_GPIO_AD_31_USB_OTG2_PWR 0x188 0x3CC 0x0 0x1 0x0 +#define IOMUXC_GPIO_AD_31_FLEXCAN2_RX 0x188 0x3CC 0x49C 0x2 0x1 +#define IOMUXC_GPIO_AD_31_ENET_TX_DATA01 0x188 0x3CC 0x0 0x3 0x0 +#define IOMUXC_GPIO_AD_31_LPUART3_RXD 0x188 0x3CC 0x0 0x4 0x0 +#define IOMUXC_GPIO_AD_31_GPIO_MUX3_IO30 0x188 0x3CC 0x0 0x5 0x0 +#define IOMUXC_GPIO_AD_31_KPP_COL02 0x188 0x3CC 0x0 0x6 0x0 +#define IOMUXC_GPIO_AD_31_FLEXIO2_D31 0x188 0x3CC 0x0 0x8 0x0 +#define IOMUXC_GPIO_AD_31_WDOG1_RESET_B_DEB 0x188 0x3CC 0x0 0x9 0x0 +#define IOMUXC_GPIO_AD_31_GPIO9_IO30 0x188 0x3CC 0x0 0xA 0x0 + +#define IOMUXC_GPIO_AD_32_GPIO9_IO31 0x18C 0x3D0 0x0 0xA 0x0 +#define IOMUXC_GPIO_AD_32_LPI2C1_SCL 0x18C 0x3D0 0x5AC 0x0 0x1 +#define IOMUXC_GPIO_AD_32_USBPHY2_OTG_ID 0x18C 0x3D0 0x6C4 0x1 0x1 +#define IOMUXC_GPIO_AD_32_PGMC_PMIC_RDY 0x18C 0x3D0 0x0 0x2 0x0 +#define IOMUXC_GPIO_AD_32_ENET_MDC 0x18C 0x3D0 0x0 0x3 0x0 +#define IOMUXC_GPIO_AD_32_USDHC1_CD_B 0x18C 0x3D0 0x6C8 0x4 0x0 +#define IOMUXC_GPIO_AD_32_GPIO_MUX3_IO31 0x18C 0x3D0 0x0 0x5 0x0 +#define IOMUXC_GPIO_AD_32_KPP_ROW01 0x18C 0x3D0 0x0 0x6 0x0 +#define IOMUXC_GPIO_AD_32_LPUART10_TXD 0x18C 0x3D0 0x628 0x8 0x1 +#define IOMUXC_GPIO_AD_32_ENET_1G_MDC 0x18C 0x3D0 0x0 0x9 0x0 + +#define IOMUXC_GPIO_AD_33_LPI2C1_SDA 0x190 0x3D4 0x5B0 0x0 0x1 +#define IOMUXC_GPIO_AD_33_USBPHY1_OTG_ID 0x190 0x3D4 0x6C0 0x1 0x1 +#define IOMUXC_GPIO_AD_33_XBAR1_INOUT17 0x190 0x3D4 0x0 0x2 0x0 +#define IOMUXC_GPIO_AD_33_ENET_MDIO 0x190 0x3D4 0x4AC 0x3 0x1 +#define IOMUXC_GPIO_AD_33_USDHC1_WP 0x190 0x3D4 0x6CC 0x4 0x0 +#define IOMUXC_GPIO_AD_33_GPIO_MUX4_IO00 0x190 0x3D4 0x0 0x5 0x0 +#define IOMUXC_GPIO_AD_33_KPP_COL01 0x190 0x3D4 0x0 0x6 0x0 +#define IOMUXC_GPIO_AD_33_LPUART10_RXD 0x190 0x3D4 0x624 0x8 0x1 +#define IOMUXC_GPIO_AD_33_ENET_1G_MDIO 0x190 0x3D4 0x4C8 0x9 0x3 +#define IOMUXC_GPIO_AD_33_GPIO10_IO00 0x190 0x3D4 0x0 0xA 0x0 + +#define IOMUXC_GPIO_AD_34_ENET_1G_1588_EVENT0_IN 0x194 0x3D8 0x0 0x0 0x0 +#define IOMUXC_GPIO_AD_34_USB_OTG1_PWR 0x194 0x3D8 0x0 0x1 0x0 +#define IOMUXC_GPIO_AD_34_XBAR1_INOUT18 0x194 0x3D8 0x0 0x2 0x0 +#define IOMUXC_GPIO_AD_34_ENET_1588_EVENT0_IN 0x194 0x3D8 0x0 0x3 0x0 +#define IOMUXC_GPIO_AD_34_USDHC1_VSELECT 0x194 0x3D8 0x0 0x4 0x0 +#define IOMUXC_GPIO_AD_34_GPIO_MUX4_IO01 0x194 0x3D8 0x0 0x5 0x0 +#define IOMUXC_GPIO_AD_34_KPP_ROW00 0x194 0x3D8 0x0 0x6 0x0 +#define IOMUXC_GPIO_AD_34_LPUART10_CTS_B 0x194 0x3D8 0x0 0x8 0x0 +#define IOMUXC_GPIO_AD_34_WDOG1_ANY 0x194 0x3D8 0x0 0x9 0x0 +#define IOMUXC_GPIO_AD_34_GPIO10_IO01 0x194 0x3D8 0x0 0xA 0x0 + +#define IOMUXC_GPIO_AD_35_GPIO10_IO02 0x198 0x3DC 0x0 0xA 0x0 +#define IOMUXC_GPIO_AD_35_ENET_1G_1588_EVENT0_OUT 0x198 0x3DC 0x0 0x0 0x0 +#define IOMUXC_GPIO_AD_35_USB_OTG1_OC 0x198 0x3DC 0x6BC 0x1 0x1 +#define IOMUXC_GPIO_AD_35_XBAR1_INOUT19 0x198 0x3DC 0x0 0x2 0x0 +#define IOMUXC_GPIO_AD_35_ENET_1588_EVENT0_OUT 0x198 0x3DC 0x0 0x3 0x0 +#define IOMUXC_GPIO_AD_35_USDHC1_RESET_B 0x198 0x3DC 0x0 0x4 0x0 +#define IOMUXC_GPIO_AD_35_GPIO_MUX4_IO02 0x198 0x3DC 0x0 0x5 0x0 +#define IOMUXC_GPIO_AD_35_KPP_COL00 0x198 0x3DC 0x0 0x6 0x0 +#define IOMUXC_GPIO_AD_35_LPUART10_RTS_B 0x198 0x3DC 0x0 0x8 0x0 +#define IOMUXC_GPIO_AD_35_FLEXSPI1_B_SS1_B 0x198 0x3DC 0x0 0x9 0x0 + +#define IOMUXC_GPIO_SD_B1_00_USDHC1_CMD 0x19C 0x3E0 0x0 0x0 0x0 +#define IOMUXC_GPIO_SD_B1_00_XBAR1_INOUT20 0x19C 0x3E0 0x6D8 0x2 0x1 +#define IOMUXC_GPIO_SD_B1_00_GPT4_CAPTURE1 0x19C 0x3E0 0x0 0x3 0x0 +#define IOMUXC_GPIO_SD_B1_00_GPIO_MUX4_IO03 0x19C 0x3E0 0x0 0x5 0x0 +#define IOMUXC_GPIO_SD_B1_00_FLEXSPI2_A_SS0_B 0x19C 0x3E0 0x0 0x6 0x0 +#define IOMUXC_GPIO_SD_B1_00_KPP_ROW07 0x19C 0x3E0 0x5A8 0x8 0x1 +#define IOMUXC_GPIO_SD_B1_00_GPIO10_IO03 0x19C 0x3E0 0x0 0xA 0x0 + +#define IOMUXC_GPIO_SD_B1_01_USDHC1_CLK 0x1A0 0x3E4 0x0 0x0 0x0 +#define IOMUXC_GPIO_SD_B1_01_XBAR1_INOUT21 0x1A0 0x3E4 0x6DC 0x2 0x1 +#define IOMUXC_GPIO_SD_B1_01_GPT4_CAPTURE2 0x1A0 0x3E4 0x0 0x3 0x0 +#define IOMUXC_GPIO_SD_B1_01_GPIO_MUX4_IO04 0x1A0 0x3E4 0x0 0x5 0x0 +#define IOMUXC_GPIO_SD_B1_01_FLEXSPI2_A_SCLK 0x1A0 0x3E4 0x58C 0x6 0x1 +#define IOMUXC_GPIO_SD_B1_01_KPP_COL07 0x1A0 0x3E4 0x5A0 0x8 0x1 +#define IOMUXC_GPIO_SD_B1_01_GPIO10_IO04 0x1A0 0x3E4 0x0 0xA 0x0 + +#define IOMUXC_GPIO_SD_B1_02_GPIO10_IO05 0x1A4 0x3E8 0x0 0xA 0x0 +#define IOMUXC_GPIO_SD_B1_02_USDHC1_DATA0 0x1A4 0x3E8 0x0 0x0 0x0 +#define IOMUXC_GPIO_SD_B1_02_XBAR1_INOUT22 0x1A4 0x3E8 0x6E0 0x2 0x1 +#define IOMUXC_GPIO_SD_B1_02_GPT4_COMPARE1 0x1A4 0x3E8 0x0 0x3 0x0 +#define IOMUXC_GPIO_SD_B1_02_GPIO_MUX4_IO05 0x1A4 0x3E8 0x0 0x5 0x0 +#define IOMUXC_GPIO_SD_B1_02_FLEXSPI2_A_DATA00 0x1A4 0x3E8 0x57C 0x6 0x1 +#define IOMUXC_GPIO_SD_B1_02_KPP_ROW06 0x1A4 0x3E8 0x5A4 0x8 0x1 +#define IOMUXC_GPIO_SD_B1_02_FLEXSPI1_A_SS1_B 0x1A4 0x3E8 0x0 0x9 0x0 + +#define IOMUXC_GPIO_SD_B1_03_USDHC1_DATA1 0x1A8 0x3EC 0x0 0x0 0x0 +#define IOMUXC_GPIO_SD_B1_03_XBAR1_INOUT23 0x1A8 0x3EC 0x6E4 0x2 0x1 +#define IOMUXC_GPIO_SD_B1_03_GPT4_COMPARE2 0x1A8 0x3EC 0x0 0x3 0x0 +#define IOMUXC_GPIO_SD_B1_03_GPIO_MUX4_IO06 0x1A8 0x3EC 0x0 0x5 0x0 +#define IOMUXC_GPIO_SD_B1_03_FLEXSPI2_A_DATA01 0x1A8 0x3EC 0x580 0x6 0x1 +#define IOMUXC_GPIO_SD_B1_03_KPP_COL06 0x1A8 0x3EC 0x59C 0x8 0x1 +#define IOMUXC_GPIO_SD_B1_03_FLEXSPI1_B_SS1_B 0x1A8 0x3EC 0x0 0x9 0x0 +#define IOMUXC_GPIO_SD_B1_03_GPIO10_IO06 0x1A8 0x3EC 0x0 0xA 0x0 + +#define IOMUXC_GPIO_SD_B1_04_USDHC1_DATA2 0x1AC 0x3F0 0x0 0x0 0x0 +#define IOMUXC_GPIO_SD_B1_04_XBAR1_INOUT24 0x1AC 0x3F0 0x6E8 0x2 0x1 +#define IOMUXC_GPIO_SD_B1_04_GPT4_COMPARE3 0x1AC 0x3F0 0x0 0x3 0x0 +#define IOMUXC_GPIO_SD_B1_04_GPIO_MUX4_IO07 0x1AC 0x3F0 0x0 0x5 0x0 +#define IOMUXC_GPIO_SD_B1_04_FLEXSPI2_A_DATA02 0x1AC 0x3F0 0x584 0x6 0x1 +#define IOMUXC_GPIO_SD_B1_04_FLEXSPI1_B_SS0_B 0x1AC 0x3F0 0x0 0x8 0x0 +#define IOMUXC_GPIO_SD_B1_04_ENET_QOS_1588_EVENT2_AUX_IN 0x1AC 0x3F0 0x0 0x9 0x0 +#define IOMUXC_GPIO_SD_B1_04_GPIO10_IO07 0x1AC 0x3F0 0x0 0xA 0x0 + +#define IOMUXC_GPIO_SD_B1_05_GPIO10_IO08 0x1B0 0x3F4 0x0 0xA 0x0 +#define IOMUXC_GPIO_SD_B1_05_USDHC1_DATA3 0x1B0 0x3F4 0x0 0x0 0x0 +#define IOMUXC_GPIO_SD_B1_05_XBAR1_INOUT25 0x1B0 0x3F4 0x6EC 0x2 0x1 +#define IOMUXC_GPIO_SD_B1_05_GPT4_CLK 0x1B0 0x3F4 0x0 0x3 0x0 +#define IOMUXC_GPIO_SD_B1_05_GPIO_MUX4_IO08 0x1B0 0x3F4 0x0 0x5 0x0 +#define IOMUXC_GPIO_SD_B1_05_FLEXSPI2_A_DATA03 0x1B0 0x3F4 0x588 0x6 0x1 +#define IOMUXC_GPIO_SD_B1_05_FLEXSPI1_B_DQS 0x1B0 0x3F4 0x0 0x8 0x0 +#define IOMUXC_GPIO_SD_B1_05_ENET_QOS_1588_EVENT3_AUX_IN 0x1B0 0x3F4 0x0 0x9 0x0 + +#define IOMUXC_GPIO_SD_B2_00_GPIO10_IO09 0x1B4 0x3F8 0x0 0xA 0x0 +#define IOMUXC_GPIO_SD_B2_00_USDHC2_DATA3 0x1B4 0x3F8 0x0 0x0 0x0 +#define IOMUXC_GPIO_SD_B2_00_FLEXSPI1_B_DATA03 0x1B4 0x3F8 0x570 0x1 0x1 +#define IOMUXC_GPIO_SD_B2_00_ENET_1G_RX_EN 0x1B4 0x3F8 0x4E0 0x2 0x1 +#define IOMUXC_GPIO_SD_B2_00_LPUART9_TXD 0x1B4 0x3F8 0x0 0x3 0x0 +#define IOMUXC_GPIO_SD_B2_00_LPSPI4_SCK 0x1B4 0x3F8 0x610 0x4 0x0 +#define IOMUXC_GPIO_SD_B2_00_GPIO_MUX4_IO09 0x1B4 0x3F8 0x0 0x5 0x0 + +#define IOMUXC_GPIO_SD_B2_01_USDHC2_DATA2 0x1B8 0x3FC 0x0 0x0 0x0 +#define IOMUXC_GPIO_SD_B2_01_FLEXSPI1_B_DATA02 0x1B8 0x3FC 0x56C 0x1 0x1 +#define IOMUXC_GPIO_SD_B2_01_ENET_1G_RX_CLK 0x1B8 0x3FC 0x4CC 0x2 0x1 +#define IOMUXC_GPIO_SD_B2_01_LPUART9_RXD 0x1B8 0x3FC 0x0 0x3 0x0 +#define IOMUXC_GPIO_SD_B2_01_LPSPI4_PCS0 0x1B8 0x3FC 0x60C 0x4 0x0 +#define IOMUXC_GPIO_SD_B2_01_GPIO_MUX4_IO10 0x1B8 0x3FC 0x0 0x5 0x0 +#define IOMUXC_GPIO_SD_B2_01_GPIO10_IO10 0x1B8 0x3FC 0x0 0xA 0x0 + +#define IOMUXC_GPIO_SD_B2_02_GPIO10_IO11 0x1BC 0x400 0x0 0xA 0x0 +#define IOMUXC_GPIO_SD_B2_02_USDHC2_DATA1 0x1BC 0x400 0x0 0x0 0x0 +#define IOMUXC_GPIO_SD_B2_02_FLEXSPI1_B_DATA01 0x1BC 0x400 0x568 0x1 0x1 +#define IOMUXC_GPIO_SD_B2_02_ENET_1G_RX_DATA00 0x1BC 0x400 0x4D0 0x2 0x1 +#define IOMUXC_GPIO_SD_B2_02_LPUART9_CTS_B 0x1BC 0x400 0x0 0x3 0x0 +#define IOMUXC_GPIO_SD_B2_02_LPSPI4_SOUT 0x1BC 0x400 0x618 0x4 0x0 +#define IOMUXC_GPIO_SD_B2_02_GPIO_MUX4_IO11 0x1BC 0x400 0x0 0x5 0x0 + +#define IOMUXC_GPIO_SD_B2_03_GPIO10_IO12 0x1C0 0x404 0x0 0xA 0x0 +#define IOMUXC_GPIO_SD_B2_03_USDHC2_DATA0 0x1C0 0x404 0x0 0x0 0x0 +#define IOMUXC_GPIO_SD_B2_03_FLEXSPI1_B_DATA00 0x1C0 0x404 0x564 0x1 0x1 +#define IOMUXC_GPIO_SD_B2_03_ENET_1G_RX_DATA01 0x1C0 0x404 0x4D4 0x2 0x1 +#define IOMUXC_GPIO_SD_B2_03_LPUART9_RTS_B 0x1C0 0x404 0x0 0x3 0x0 +#define IOMUXC_GPIO_SD_B2_03_LPSPI4_SIN 0x1C0 0x404 0x614 0x4 0x0 +#define IOMUXC_GPIO_SD_B2_03_GPIO_MUX4_IO12 0x1C0 0x404 0x0 0x5 0x0 + +#define IOMUXC_GPIO_SD_B2_04_USDHC2_CLK 0x1C4 0x408 0x0 0x0 0x0 +#define IOMUXC_GPIO_SD_B2_04_FLEXSPI1_B_SCLK 0x1C4 0x408 0x578 0x1 0x1 +#define IOMUXC_GPIO_SD_B2_04_ENET_1G_RX_DATA02 0x1C4 0x408 0x4D8 0x2 0x1 +#define IOMUXC_GPIO_SD_B2_04_FLEXSPI1_A_SS1_B 0x1C4 0x408 0x0 0x3 0x0 +#define IOMUXC_GPIO_SD_B2_04_LPSPI4_PCS1 0x1C4 0x408 0x0 0x4 0x0 +#define IOMUXC_GPIO_SD_B2_04_GPIO_MUX4_IO13 0x1C4 0x408 0x0 0x5 0x0 +#define IOMUXC_GPIO_SD_B2_04_GPIO10_IO13 0x1C4 0x408 0x0 0xA 0x0 + +#define IOMUXC_GPIO_SD_B2_05_GPIO10_IO14 0x1C8 0x40C 0x0 0xA 0x0 +#define IOMUXC_GPIO_SD_B2_05_USDHC2_CMD 0x1C8 0x40C 0x0 0x0 0x0 +#define IOMUXC_GPIO_SD_B2_05_FLEXSPI1_A_DQS 0x1C8 0x40C 0x550 0x1 0x2 +#define IOMUXC_GPIO_SD_B2_05_ENET_1G_RX_DATA03 0x1C8 0x40C 0x4DC 0x2 0x1 +#define IOMUXC_GPIO_SD_B2_05_FLEXSPI1_B_SS0_B 0x1C8 0x40C 0x0 0x3 0x0 +#define IOMUXC_GPIO_SD_B2_05_LPSPI4_PCS2 0x1C8 0x40C 0x0 0x4 0x0 +#define IOMUXC_GPIO_SD_B2_05_GPIO_MUX4_IO14 0x1C8 0x40C 0x0 0x5 0x0 + +#define IOMUXC_GPIO_SD_B2_06_GPIO10_IO15 0x1CC 0x410 0x0 0xA 0x0 +#define IOMUXC_GPIO_SD_B2_06_USDHC2_RESET_B 0x1CC 0x410 0x0 0x0 0x0 +#define IOMUXC_GPIO_SD_B2_06_FLEXSPI1_A_SS0_B 0x1CC 0x410 0x0 0x1 0x0 +#define IOMUXC_GPIO_SD_B2_06_ENET_1G_TX_DATA03 0x1CC 0x410 0x0 0x2 0x0 +#define IOMUXC_GPIO_SD_B2_06_LPSPI4_PCS3 0x1CC 0x410 0x0 0x3 0x0 +#define IOMUXC_GPIO_SD_B2_06_GPT6_CAPTURE1 0x1CC 0x410 0x0 0x4 0x0 +#define IOMUXC_GPIO_SD_B2_06_GPIO_MUX4_IO15 0x1CC 0x410 0x0 0x5 0x0 + +#define IOMUXC_GPIO_SD_B2_07_USDHC2_STROBE 0x1D0 0x414 0x0 0x0 0x0 +#define IOMUXC_GPIO_SD_B2_07_FLEXSPI1_A_SCLK 0x1D0 0x414 0x574 0x1 0x1 +#define IOMUXC_GPIO_SD_B2_07_ENET_1G_TX_DATA02 0x1D0 0x414 0x0 0x2 0x0 +#define IOMUXC_GPIO_SD_B2_07_LPUART3_CTS_B 0x1D0 0x414 0x0 0x3 0x0 +#define IOMUXC_GPIO_SD_B2_07_GPT6_CAPTURE2 0x1D0 0x414 0x0 0x4 0x0 +#define IOMUXC_GPIO_SD_B2_07_GPIO_MUX4_IO16 0x1D0 0x414 0x0 0x5 0x0 +#define IOMUXC_GPIO_SD_B2_07_LPSPI2_SCK 0x1D0 0x414 0x5E4 0x6 0x1 +#define IOMUXC_GPIO_SD_B2_07_ENET_TX_ER 0x1D0 0x414 0x0 0x8 0x0 +#define IOMUXC_GPIO_SD_B2_07_ENET_QOS_REF_CLK 0x1D0 0x414 0x4A0 0x9 0x1 +#define IOMUXC_GPIO_SD_B2_07_GPIO10_IO16 0x1D0 0x414 0x0 0xA 0x0 + +#define IOMUXC_GPIO_SD_B2_08_GPIO10_IO17 0x1D4 0x418 0x0 0xA 0x0 +#define IOMUXC_GPIO_SD_B2_08_USDHC2_DATA4 0x1D4 0x418 0x0 0x0 0x0 +#define IOMUXC_GPIO_SD_B2_08_FLEXSPI1_A_DATA00 0x1D4 0x418 0x554 0x1 0x1 +#define IOMUXC_GPIO_SD_B2_08_ENET_1G_TX_DATA01 0x1D4 0x418 0x0 0x2 0x0 +#define IOMUXC_GPIO_SD_B2_08_LPUART3_RTS_B 0x1D4 0x418 0x0 0x3 0x0 +#define IOMUXC_GPIO_SD_B2_08_GPT6_COMPARE1 0x1D4 0x418 0x0 0x4 0x0 +#define IOMUXC_GPIO_SD_B2_08_GPIO_MUX4_IO17 0x1D4 0x418 0x0 0x5 0x0 +#define IOMUXC_GPIO_SD_B2_08_LPSPI2_PCS0 0x1D4 0x418 0x5DC 0x6 0x1 + +#define IOMUXC_GPIO_SD_B2_09_GPIO10_IO18 0x1D8 0x41C 0x0 0xA 0x0 +#define IOMUXC_GPIO_SD_B2_09_USDHC2_DATA5 0x1D8 0x41C 0x0 0x0 0x0 +#define IOMUXC_GPIO_SD_B2_09_FLEXSPI1_A_DATA01 0x1D8 0x41C 0x558 0x1 0x1 +#define IOMUXC_GPIO_SD_B2_09_ENET_1G_TX_DATA00 0x1D8 0x41C 0x0 0x2 0x0 +#define IOMUXC_GPIO_SD_B2_09_LPUART5_CTS_B 0x1D8 0x41C 0x0 0x3 0x0 +#define IOMUXC_GPIO_SD_B2_09_GPT6_COMPARE2 0x1D8 0x41C 0x0 0x4 0x0 +#define IOMUXC_GPIO_SD_B2_09_GPIO_MUX4_IO18 0x1D8 0x41C 0x0 0x5 0x0 +#define IOMUXC_GPIO_SD_B2_09_LPSPI2_SOUT 0x1D8 0x41C 0x5EC 0x6 0x1 + +#define IOMUXC_GPIO_SD_B2_10_GPIO10_IO19 0x1DC 0x420 0x0 0xA 0x0 +#define IOMUXC_GPIO_SD_B2_10_USDHC2_DATA6 0x1DC 0x420 0x0 0x0 0x0 +#define IOMUXC_GPIO_SD_B2_10_FLEXSPI1_A_DATA02 0x1DC 0x420 0x55C 0x1 0x1 +#define IOMUXC_GPIO_SD_B2_10_ENET_1G_TX_EN 0x1DC 0x420 0x0 0x2 0x0 +#define IOMUXC_GPIO_SD_B2_10_LPUART5_RTS_B 0x1DC 0x420 0x0 0x3 0x0 +#define IOMUXC_GPIO_SD_B2_10_GPT6_COMPARE3 0x1DC 0x420 0x0 0x4 0x0 +#define IOMUXC_GPIO_SD_B2_10_GPIO_MUX4_IO19 0x1DC 0x420 0x0 0x5 0x0 +#define IOMUXC_GPIO_SD_B2_10_LPSPI2_SIN 0x1DC 0x420 0x5E8 0x6 0x1 + +#define IOMUXC_GPIO_SD_B2_11_USDHC2_DATA7 0x1E0 0x424 0x0 0x0 0x0 +#define IOMUXC_GPIO_SD_B2_11_FLEXSPI1_A_DATA03 0x1E0 0x424 0x560 0x1 0x1 +#define IOMUXC_GPIO_SD_B2_11_ENET_1G_TX_CLK_IO 0x1E0 0x424 0x4E8 0x2 0x1 +#define IOMUXC_GPIO_SD_B2_11_ENET_1G_REF_CLK 0x1E0 0x424 0x4C4 0x3 0x1 +#define IOMUXC_GPIO_SD_B2_11_GPT6_CLK 0x1E0 0x424 0x0 0x4 0x0 +#define IOMUXC_GPIO_SD_B2_11_GPIO_MUX4_IO20 0x1E0 0x424 0x0 0x5 0x0 +#define IOMUXC_GPIO_SD_B2_11_LPSPI2_PCS1 0x1E0 0x424 0x5E0 0x6 0x1 +#define IOMUXC_GPIO_SD_B2_11_GPIO10_IO20 0x1E0 0x424 0x0 0xA 0x0 + +#define IOMUXC_GPIO_DISP_B1_00_VIDEO_MUX_LCDIF_CLK 0x1E4 0x428 0x0 0x0 0x0 +#define IOMUXC_GPIO_DISP_B1_00_ENET_1G_RX_EN 0x1E4 0x428 0x4E0 0x1 0x2 +#define IOMUXC_GPIO_DISP_B1_00_TMR1_TIMER0 0x1E4 0x428 0x63C 0x3 0x2 +#define IOMUXC_GPIO_DISP_B1_00_XBAR1_INOUT26 0x1E4 0x428 0x6F0 0x4 0x1 +#define IOMUXC_GPIO_DISP_B1_00_GPIO_MUX4_IO21 0x1E4 0x428 0x0 0x5 0x0 +#define IOMUXC_GPIO_DISP_B1_00_ENET_QOS_RX_EN 0x1E4 0x428 0x4F8 0x8 0x0 +#define IOMUXC_GPIO_DISP_B1_00_GPIO10_IO21 0x1E4 0x428 0x0 0xA 0x0 + +#define IOMUXC_GPIO_DISP_B1_01_VIDEO_MUX_LCDIF_ENABLE 0x1E8 0x42C 0x0 0x0 0x0 +#define IOMUXC_GPIO_DISP_B1_01_ENET_1G_RX_CLK 0x1E8 0x42C 0x4CC 0x1 0x2 +#define IOMUXC_GPIO_DISP_B1_01_ENET_1G_RX_ER 0x1E8 0x42C 0x4E4 0x2 0x1 +#define IOMUXC_GPIO_DISP_B1_01_TMR1_TIMER1 0x1E8 0x42C 0x640 0x3 0x2 +#define IOMUXC_GPIO_DISP_B1_01_XBAR1_INOUT27 0x1E8 0x42C 0x6F4 0x4 0x1 +#define IOMUXC_GPIO_DISP_B1_01_GPIO_MUX4_IO22 0x1E8 0x42C 0x0 0x5 0x0 +#define IOMUXC_GPIO_DISP_B1_01_ENET_QOS_RX_CLK 0x1E8 0x42C 0x0 0x8 0x0 +#define IOMUXC_GPIO_DISP_B1_01_ENET_QOS_RX_ER 0x1E8 0x42C 0x4FC 0x9 0x0 +#define IOMUXC_GPIO_DISP_B1_01_GPIO10_IO22 0x1E8 0x42C 0x0 0xA 0x0 + +#define IOMUXC_GPIO_DISP_B1_02_GPIO10_IO23 0x1EC 0x430 0x0 0xA 0x0 +#define IOMUXC_GPIO_DISP_B1_02_VIDEO_MUX_LCDIF_HSYNC 0x1EC 0x430 0x0 0x0 0x0 +#define IOMUXC_GPIO_DISP_B1_02_ENET_1G_RX_DATA00 0x1EC 0x430 0x4D0 0x1 0x2 +#define IOMUXC_GPIO_DISP_B1_02_LPI2C3_SCL 0x1EC 0x430 0x5BC 0x2 0x0 +#define IOMUXC_GPIO_DISP_B1_02_TMR1_TIMER2 0x1EC 0x430 0x644 0x3 0x1 +#define IOMUXC_GPIO_DISP_B1_02_XBAR1_INOUT28 0x1EC 0x430 0x6F8 0x4 0x1 +#define IOMUXC_GPIO_DISP_B1_02_GPIO_MUX4_IO23 0x1EC 0x430 0x0 0x5 0x0 +#define IOMUXC_GPIO_DISP_B1_02_ENET_QOS_RX_DATA00 0x1EC 0x430 0x4F0 0x8 0x0 +#define IOMUXC_GPIO_DISP_B1_02_LPUART1_TXD 0x1EC 0x430 0x620 0x9 0x1 + +#define IOMUXC_GPIO_DISP_B1_03_VIDEO_MUX_LCDIF_VSYNC 0x1F0 0x434 0x0 0x0 0x0 +#define IOMUXC_GPIO_DISP_B1_03_ENET_1G_RX_DATA01 0x1F0 0x434 0x4D4 0x1 0x2 +#define IOMUXC_GPIO_DISP_B1_03_LPI2C3_SDA 0x1F0 0x434 0x5C0 0x2 0x0 +#define IOMUXC_GPIO_DISP_B1_03_TMR2_TIMER0 0x1F0 0x434 0x648 0x3 0x2 +#define IOMUXC_GPIO_DISP_B1_03_XBAR1_INOUT29 0x1F0 0x434 0x6FC 0x4 0x1 +#define IOMUXC_GPIO_DISP_B1_03_GPIO_MUX4_IO24 0x1F0 0x434 0x0 0x5 0x0 +#define IOMUXC_GPIO_DISP_B1_03_ENET_QOS_RX_DATA01 0x1F0 0x434 0x4F4 0x8 0x0 +#define IOMUXC_GPIO_DISP_B1_03_LPUART1_RXD 0x1F0 0x434 0x61C 0x9 0x1 +#define IOMUXC_GPIO_DISP_B1_03_GPIO10_IO24 0x1F0 0x434 0x0 0xA 0x0 + +#define IOMUXC_GPIO_DISP_B1_04_VIDEO_MUX_LCDIF_DATA00 0x1F4 0x438 0x0 0x0 0x0 +#define IOMUXC_GPIO_DISP_B1_04_ENET_1G_RX_DATA02 0x1F4 0x438 0x4D8 0x1 0x2 +#define IOMUXC_GPIO_DISP_B1_04_LPUART4_RXD 0x1F4 0x438 0x0 0x2 0x0 +#define IOMUXC_GPIO_DISP_B1_04_TMR2_TIMER1 0x1F4 0x438 0x64C 0x3 0x2 +#define IOMUXC_GPIO_DISP_B1_04_XBAR1_INOUT30 0x1F4 0x438 0x700 0x4 0x1 +#define IOMUXC_GPIO_DISP_B1_04_GPIO_MUX4_IO25 0x1F4 0x438 0x0 0x5 0x0 +#define IOMUXC_GPIO_DISP_B1_04_ENET_QOS_RX_DATA02 0x1F4 0x438 0x0 0x8 0x0 +#define IOMUXC_GPIO_DISP_B1_04_LPSPI3_SCK 0x1F4 0x438 0x600 0x9 0x1 +#define IOMUXC_GPIO_DISP_B1_04_GPIO10_IO25 0x1F4 0x438 0x0 0xA 0x0 + +#define IOMUXC_GPIO_DISP_B1_05_GPIO10_IO26 0x1F8 0x43C 0x0 0xA 0x0 +#define IOMUXC_GPIO_DISP_B1_05_VIDEO_MUX_LCDIF_DATA01 0x1F8 0x43C 0x0 0x0 0x0 +#define IOMUXC_GPIO_DISP_B1_05_ENET_1G_RX_DATA03 0x1F8 0x43C 0x4DC 0x1 0x2 +#define IOMUXC_GPIO_DISP_B1_05_LPUART4_CTS_B 0x1F8 0x43C 0x0 0x2 0x0 +#define IOMUXC_GPIO_DISP_B1_05_TMR2_TIMER2 0x1F8 0x43C 0x650 0x3 0x1 +#define IOMUXC_GPIO_DISP_B1_05_XBAR1_INOUT31 0x1F8 0x43C 0x704 0x4 0x1 +#define IOMUXC_GPIO_DISP_B1_05_GPIO_MUX4_IO26 0x1F8 0x43C 0x0 0x5 0x0 +#define IOMUXC_GPIO_DISP_B1_05_ENET_QOS_RX_DATA03 0x1F8 0x43C 0x0 0x8 0x0 +#define IOMUXC_GPIO_DISP_B1_05_LPSPI3_SIN 0x1F8 0x43C 0x604 0x9 0x1 + +#define IOMUXC_GPIO_DISP_B1_06_VIDEO_MUX_LCDIF_DATA02 0x1FC 0x440 0x0 0x0 0x0 +#define IOMUXC_GPIO_DISP_B1_06_ENET_1G_TX_DATA03 0x1FC 0x440 0x0 0x1 0x0 +#define IOMUXC_GPIO_DISP_B1_06_LPUART4_TXD 0x1FC 0x440 0x0 0x2 0x0 +#define IOMUXC_GPIO_DISP_B1_06_TMR3_TIMER0 0x1FC 0x440 0x654 0x3 0x2 +#define IOMUXC_GPIO_DISP_B1_06_XBAR1_INOUT32 0x1FC 0x440 0x708 0x4 0x1 +#define IOMUXC_GPIO_DISP_B1_06_GPIO_MUX4_IO27 0x1FC 0x440 0x0 0x5 0x0 +#define IOMUXC_GPIO_DISP_B1_06_SRC_BT_CFG00 0x1FC 0x440 0x0 0x6 0x0 +#define IOMUXC_GPIO_DISP_B1_06_ENET_QOS_TX_DATA03 0x1FC 0x440 0x0 0x8 0x0 +#define IOMUXC_GPIO_DISP_B1_06_LPSPI3_SOUT 0x1FC 0x440 0x608 0x9 0x1 +#define IOMUXC_GPIO_DISP_B1_06_GPIO10_IO27 0x1FC 0x440 0x0 0xA 0x0 + +#define IOMUXC_GPIO_DISP_B1_07_VIDEO_MUX_LCDIF_DATA03 0x200 0x444 0x0 0x0 0x0 +#define IOMUXC_GPIO_DISP_B1_07_ENET_1G_TX_DATA02 0x200 0x444 0x0 0x1 0x0 +#define IOMUXC_GPIO_DISP_B1_07_LPUART4_RTS_B 0x200 0x444 0x0 0x2 0x0 +#define IOMUXC_GPIO_DISP_B1_07_TMR3_TIMER1 0x200 0x444 0x658 0x3 0x2 +#define IOMUXC_GPIO_DISP_B1_07_XBAR1_INOUT33 0x200 0x444 0x70C 0x4 0x1 +#define IOMUXC_GPIO_DISP_B1_07_GPIO_MUX4_IO28 0x200 0x444 0x0 0x5 0x0 +#define IOMUXC_GPIO_DISP_B1_07_SRC_BT_CFG01 0x200 0x444 0x0 0x6 0x0 +#define IOMUXC_GPIO_DISP_B1_07_ENET_QOS_TX_DATA02 0x200 0x444 0x0 0x8 0x0 +#define IOMUXC_GPIO_DISP_B1_07_LPSPI3_PCS0 0x200 0x444 0x5F0 0x9 0x1 +#define IOMUXC_GPIO_DISP_B1_07_GPIO10_IO28 0x200 0x444 0x0 0xA 0x0 + +#define IOMUXC_GPIO_DISP_B1_08_GPIO10_IO29 0x204 0x448 0x0 0xA 0x0 +#define IOMUXC_GPIO_DISP_B1_08_VIDEO_MUX_LCDIF_DATA04 0x204 0x448 0x0 0x0 0x0 +#define IOMUXC_GPIO_DISP_B1_08_ENET_1G_TX_DATA01 0x204 0x448 0x0 0x1 0x0 +#define IOMUXC_GPIO_DISP_B1_08_USDHC1_CD_B 0x204 0x448 0x6C8 0x2 0x1 +#define IOMUXC_GPIO_DISP_B1_08_TMR3_TIMER2 0x204 0x448 0x65C 0x3 0x1 +#define IOMUXC_GPIO_DISP_B1_08_XBAR1_INOUT34 0x204 0x448 0x710 0x4 0x1 +#define IOMUXC_GPIO_DISP_B1_08_GPIO_MUX4_IO29 0x204 0x448 0x0 0x5 0x0 +#define IOMUXC_GPIO_DISP_B1_08_SRC_BT_CFG02 0x204 0x448 0x0 0x6 0x0 +#define IOMUXC_GPIO_DISP_B1_08_ENET_QOS_TX_DATA01 0x204 0x448 0x0 0x8 0x0 +#define IOMUXC_GPIO_DISP_B1_08_LPSPI3_PCS1 0x204 0x448 0x5F4 0x9 0x1 + +#define IOMUXC_GPIO_DISP_B1_09_VIDEO_MUX_LCDIF_DATA05 0x208 0x44C 0x0 0x0 0x0 +#define IOMUXC_GPIO_DISP_B1_09_ENET_1G_TX_DATA00 0x208 0x44C 0x0 0x1 0x0 +#define IOMUXC_GPIO_DISP_B1_09_USDHC1_WP 0x208 0x44C 0x6CC 0x2 0x1 +#define IOMUXC_GPIO_DISP_B1_09_TMR4_TIMER0 0x208 0x44C 0x660 0x3 0x2 +#define IOMUXC_GPIO_DISP_B1_09_XBAR1_INOUT35 0x208 0x44C 0x714 0x4 0x1 +#define IOMUXC_GPIO_DISP_B1_09_GPIO_MUX4_IO30 0x208 0x44C 0x0 0x5 0x0 +#define IOMUXC_GPIO_DISP_B1_09_SRC_BT_CFG03 0x208 0x44C 0x0 0x6 0x0 +#define IOMUXC_GPIO_DISP_B1_09_ENET_QOS_TX_DATA00 0x208 0x44C 0x0 0x8 0x0 +#define IOMUXC_GPIO_DISP_B1_09_LPSPI3_PCS2 0x208 0x44C 0x5F8 0x9 0x1 +#define IOMUXC_GPIO_DISP_B1_09_GPIO10_IO30 0x208 0x44C 0x0 0xA 0x0 + +#define IOMUXC_GPIO_DISP_B1_10_VIDEO_MUX_LCDIF_DATA06 0x20C 0x450 0x0 0x0 0x0 +#define IOMUXC_GPIO_DISP_B1_10_ENET_1G_TX_EN 0x20C 0x450 0x0 0x1 0x0 +#define IOMUXC_GPIO_DISP_B1_10_USDHC1_RESET_B 0x20C 0x450 0x0 0x2 0x0 +#define IOMUXC_GPIO_DISP_B1_10_TMR4_TIMER1 0x20C 0x450 0x664 0x3 0x2 +#define IOMUXC_GPIO_DISP_B1_10_XBAR1_INOUT36 0x20C 0x450 0x0 0x4 0x0 +#define IOMUXC_GPIO_DISP_B1_10_GPIO_MUX4_IO31 0x20C 0x450 0x0 0x5 0x0 +#define IOMUXC_GPIO_DISP_B1_10_SRC_BT_CFG04 0x20C 0x450 0x0 0x6 0x0 +#define IOMUXC_GPIO_DISP_B1_10_ENET_QOS_TX_EN 0x20C 0x450 0x0 0x8 0x0 +#define IOMUXC_GPIO_DISP_B1_10_LPSPI3_PCS3 0x20C 0x450 0x5FC 0x9 0x1 +#define IOMUXC_GPIO_DISP_B1_10_GPIO10_IO31 0x20C 0x450 0x0 0xA 0x0 + +#define IOMUXC_GPIO_DISP_B1_11_VIDEO_MUX_LCDIF_DATA07 0x210 0x454 0x0 0x0 0x0 +#define IOMUXC_GPIO_DISP_B1_11_ENET_1G_TX_CLK_IO 0x210 0x454 0x4E8 0x1 0x2 +#define IOMUXC_GPIO_DISP_B1_11_ENET_1G_REF_CLK 0x210 0x454 0x4C4 0x2 0x2 +#define IOMUXC_GPIO_DISP_B1_11_TMR4_TIMER2 0x210 0x454 0x668 0x3 0x1 +#define IOMUXC_GPIO_DISP_B1_11_XBAR1_INOUT37 0x210 0x454 0x0 0x4 0x0 +#define IOMUXC_GPIO_DISP_B1_11_GPIO_MUX5_IO00 0x210 0x454 0x0 0x5 0x0 +#define IOMUXC_GPIO_DISP_B1_11_SRC_BT_CFG05 0x210 0x454 0x0 0x6 0x0 +#define IOMUXC_GPIO_DISP_B1_11_ENET_QOS_TX_CLK 0x210 0x454 0x4A4 0x8 0x0 +#define IOMUXC_GPIO_DISP_B1_11_ENET_QOS_REF_CLK 0x210 0x454 0x4A0 0x9 0x2 +#define IOMUXC_GPIO_DISP_B1_11_GPIO11_IO00 0x210 0x454 0x0 0xA 0x0 + +#define IOMUXC_GPIO_DISP_B2_00_GPIO11_IO01 0x214 0x458 0x0 0xA 0x0 +#define IOMUXC_GPIO_DISP_B2_00_VIDEO_MUX_LCDIF_DATA08 0x214 0x458 0x0 0x0 0x0 +#define IOMUXC_GPIO_DISP_B2_00_WDOG1_B 0x214 0x458 0x0 0x1 0x0 +#define IOMUXC_GPIO_DISP_B2_00_MQS_RIGHT 0x214 0x458 0x0 0x2 0x0 +#define IOMUXC_GPIO_DISP_B2_00_ENET_1G_TX_ER 0x214 0x458 0x0 0x3 0x0 +#define IOMUXC_GPIO_DISP_B2_00_SAI1_TX_DATA03 0x214 0x458 0x0 0x4 0x0 +#define IOMUXC_GPIO_DISP_B2_00_GPIO_MUX5_IO01 0x214 0x458 0x0 0x5 0x0 +#define IOMUXC_GPIO_DISP_B2_00_SRC_BT_CFG06 0x214 0x458 0x0 0x6 0x0 +#define IOMUXC_GPIO_DISP_B2_00_ENET_QOS_TX_ER 0x214 0x458 0x0 0x8 0x0 + +#define IOMUXC_GPIO_DISP_B2_01_VIDEO_MUX_LCDIF_DATA09 0x218 0x45C 0x0 0x0 0x0 +#define IOMUXC_GPIO_DISP_B2_01_USDHC1_VSELECT 0x218 0x45C 0x0 0x1 0x0 +#define IOMUXC_GPIO_DISP_B2_01_MQS_LEFT 0x218 0x45C 0x0 0x2 0x0 +#define IOMUXC_GPIO_DISP_B2_01_WDOG2_B 0x218 0x45C 0x0 0x3 0x0 +#define IOMUXC_GPIO_DISP_B2_01_SAI1_TX_DATA02 0x218 0x45C 0x0 0x4 0x0 +#define IOMUXC_GPIO_DISP_B2_01_GPIO_MUX5_IO02 0x218 0x45C 0x0 0x5 0x0 +#define IOMUXC_GPIO_DISP_B2_01_SRC_BT_CFG07 0x218 0x45C 0x0 0x6 0x0 +#define IOMUXC_GPIO_DISP_B2_01_EWM_OUT_B 0x218 0x45C 0x0 0x8 0x0 +#define IOMUXC_GPIO_DISP_B2_01_CCM_ENET_REF_CLK_25M 0x218 0x45C 0x0 0x9 0x0 +#define IOMUXC_GPIO_DISP_B2_01_GPIO11_IO02 0x218 0x45C 0x0 0xA 0x0 + +#define IOMUXC_GPIO_DISP_B2_02_GPIO11_IO03 0x21C 0x460 0x0 0xA 0x0 +#define IOMUXC_GPIO_DISP_B2_02_VIDEO_MUX_LCDIF_DATA10 0x21C 0x460 0x0 0x0 0x0 +#define IOMUXC_GPIO_DISP_B2_02_ENET_TX_DATA00 0x21C 0x460 0x0 0x1 0x0 +#define IOMUXC_GPIO_DISP_B2_02_PIT1_TRIGGER3 0x21C 0x460 0x0 0x2 0x0 +#define IOMUXC_GPIO_DISP_B2_02_ARM_TRACE00 0x21C 0x460 0x0 0x3 0x0 +#define IOMUXC_GPIO_DISP_B2_02_SAI1_TX_DATA01 0x21C 0x460 0x0 0x4 0x0 +#define IOMUXC_GPIO_DISP_B2_02_GPIO_MUX5_IO03 0x21C 0x460 0x0 0x5 0x0 +#define IOMUXC_GPIO_DISP_B2_02_SRC_BT_CFG08 0x21C 0x460 0x0 0x6 0x0 +#define IOMUXC_GPIO_DISP_B2_02_ENET_QOS_TX_DATA00 0x21C 0x460 0x0 0x8 0x0 + +#define IOMUXC_GPIO_DISP_B2_03_GPIO11_IO04 0x220 0x464 0x0 0xA 0x0 +#define IOMUXC_GPIO_DISP_B2_03_VIDEO_MUX_LCDIF_DATA11 0x220 0x464 0x0 0x0 0x0 +#define IOMUXC_GPIO_DISP_B2_03_ENET_TX_DATA01 0x220 0x464 0x0 0x1 0x0 +#define IOMUXC_GPIO_DISP_B2_03_PIT1_TRIGGER2 0x220 0x464 0x0 0x2 0x0 +#define IOMUXC_GPIO_DISP_B2_03_ARM_TRACE01 0x220 0x464 0x0 0x3 0x0 +#define IOMUXC_GPIO_DISP_B2_03_SAI1_MCLK 0x220 0x464 0x66C 0x4 0x1 +#define IOMUXC_GPIO_DISP_B2_03_GPIO_MUX5_IO04 0x220 0x464 0x0 0x5 0x0 +#define IOMUXC_GPIO_DISP_B2_03_SRC_BT_CFG09 0x220 0x464 0x0 0x6 0x0 +#define IOMUXC_GPIO_DISP_B2_03_ENET_QOS_TX_DATA01 0x220 0x464 0x0 0x8 0x0 + +#define IOMUXC_GPIO_DISP_B2_04_VIDEO_MUX_LCDIF_DATA12 0x224 0x468 0x0 0x0 0x0 +#define IOMUXC_GPIO_DISP_B2_04_ENET_TX_EN 0x224 0x468 0x0 0x1 0x0 +#define IOMUXC_GPIO_DISP_B2_04_PIT1_TRIGGER1 0x224 0x468 0x0 0x2 0x0 +#define IOMUXC_GPIO_DISP_B2_04_ARM_TRACE02 0x224 0x468 0x0 0x3 0x0 +#define IOMUXC_GPIO_DISP_B2_04_SAI1_RX_SYNC 0x224 0x468 0x678 0x4 0x1 +#define IOMUXC_GPIO_DISP_B2_04_GPIO_MUX5_IO05 0x224 0x468 0x0 0x5 0x0 +#define IOMUXC_GPIO_DISP_B2_04_SRC_BT_CFG10 0x224 0x468 0x0 0x6 0x0 +#define IOMUXC_GPIO_DISP_B2_04_ENET_QOS_TX_EN 0x224 0x468 0x0 0x8 0x0 +#define IOMUXC_GPIO_DISP_B2_04_GPIO11_IO05 0x224 0x468 0x0 0xA 0x0 + +#define IOMUXC_GPIO_DISP_B2_05_GPIO11_IO06 0x228 0x46C 0x0 0xA 0x0 +#define IOMUXC_GPIO_DISP_B2_05_VIDEO_MUX_LCDIF_DATA13 0x228 0x46C 0x0 0x0 0x0 +#define IOMUXC_GPIO_DISP_B2_05_ENET_TX_CLK 0x228 0x46C 0x4C0 0x1 0x1 +#define IOMUXC_GPIO_DISP_B2_05_ENET_REF_CLK 0x228 0x46C 0x4A8 0x2 0x1 +#define IOMUXC_GPIO_DISP_B2_05_ARM_TRACE03 0x228 0x46C 0x0 0x3 0x0 +#define IOMUXC_GPIO_DISP_B2_05_SAI1_RX_BCLK 0x228 0x46C 0x670 0x4 0x1 +#define IOMUXC_GPIO_DISP_B2_05_GPIO_MUX5_IO06 0x228 0x46C 0x0 0x5 0x0 +#define IOMUXC_GPIO_DISP_B2_05_SRC_BT_CFG11 0x228 0x46C 0x0 0x6 0x0 +#define IOMUXC_GPIO_DISP_B2_05_ENET_QOS_TX_CLK 0x228 0x46C 0x4A4 0x8 0x1 + +#define IOMUXC_GPIO_DISP_B2_06_GPIO11_IO07 0x22C 0x470 0x0 0xA 0x0 +#define IOMUXC_GPIO_DISP_B2_06_VIDEO_MUX_LCDIF_DATA14 0x22C 0x470 0x0 0x0 0x0 +#define IOMUXC_GPIO_DISP_B2_06_ENET_RX_DATA00 0x22C 0x470 0x4B0 0x1 0x1 +#define IOMUXC_GPIO_DISP_B2_06_LPUART7_TXD 0x22C 0x470 0x630 0x2 0x1 +#define IOMUXC_GPIO_DISP_B2_06_ARM_TRACE_CLK 0x22C 0x470 0x0 0x3 0x0 +#define IOMUXC_GPIO_DISP_B2_06_SAI1_RX_DATA00 0x22C 0x470 0x674 0x4 0x1 +#define IOMUXC_GPIO_DISP_B2_06_GPIO_MUX5_IO07 0x22C 0x470 0x0 0x5 0x0 +#define IOMUXC_GPIO_DISP_B2_06_ENET_QOS_RX_DATA00 0x22C 0x470 0x4F0 0x8 0x1 + +#define IOMUXC_GPIO_DISP_B2_07_VIDEO_MUX_LCDIF_DATA15 0x230 0x474 0x0 0x0 0x0 +#define IOMUXC_GPIO_DISP_B2_07_ENET_RX_DATA01 0x230 0x474 0x4B4 0x1 0x1 +#define IOMUXC_GPIO_DISP_B2_07_LPUART7_RXD 0x230 0x474 0x62C 0x2 0x1 +#define IOMUXC_GPIO_DISP_B2_07_ARM_TRACE_SWO 0x230 0x474 0x0 0x3 0x0 +#define IOMUXC_GPIO_DISP_B2_07_SAI1_TX_DATA00 0x230 0x474 0x0 0x4 0x0 +#define IOMUXC_GPIO_DISP_B2_07_GPIO_MUX5_IO08 0x230 0x474 0x0 0x5 0x0 +#define IOMUXC_GPIO_DISP_B2_07_ENET_QOS_RX_DATA01 0x230 0x474 0x4F4 0x8 0x1 +#define IOMUXC_GPIO_DISP_B2_07_GPIO11_IO08 0x230 0x474 0x0 0xA 0x0 + +#define IOMUXC_GPIO_DISP_B2_08_GPIO11_IO09 0x234 0x478 0x0 0xA 0x0 +#define IOMUXC_GPIO_DISP_B2_08_VIDEO_MUX_LCDIF_DATA16 0x234 0x478 0x0 0x0 0x0 +#define IOMUXC_GPIO_DISP_B2_08_ENET_RX_EN 0x234 0x478 0x4B8 0x1 0x1 +#define IOMUXC_GPIO_DISP_B2_08_LPUART8_TXD 0x234 0x478 0x638 0x2 0x1 +#define IOMUXC_GPIO_DISP_B2_08_ARM_CM7_EVENTO 0x234 0x478 0x0 0x3 0x0 +#define IOMUXC_GPIO_DISP_B2_08_SAI1_TX_BCLK 0x234 0x478 0x67C 0x4 0x1 +#define IOMUXC_GPIO_DISP_B2_08_GPIO_MUX5_IO09 0x234 0x478 0x0 0x5 0x0 +#define IOMUXC_GPIO_DISP_B2_08_ENET_QOS_RX_EN 0x234 0x478 0x4F8 0x8 0x1 +#define IOMUXC_GPIO_DISP_B2_08_LPUART1_TXD 0x234 0x478 0x620 0x9 0x2 + +#define IOMUXC_GPIO_DISP_B2_09_GPIO11_IO10 0x238 0x47C 0x0 0xA 0x0 +#define IOMUXC_GPIO_DISP_B2_09_VIDEO_MUX_LCDIF_DATA17 0x238 0x47C 0x0 0x0 0x0 +#define IOMUXC_GPIO_DISP_B2_09_ENET_RX_ER 0x238 0x47C 0x4BC 0x1 0x1 +#define IOMUXC_GPIO_DISP_B2_09_LPUART8_RXD 0x238 0x47C 0x634 0x2 0x1 +#define IOMUXC_GPIO_DISP_B2_09_ARM_CM7_EVENTI 0x238 0x47C 0x0 0x3 0x0 +#define IOMUXC_GPIO_DISP_B2_09_SAI1_TX_SYNC 0x238 0x47C 0x680 0x4 0x1 +#define IOMUXC_GPIO_DISP_B2_09_GPIO_MUX5_IO10 0x238 0x47C 0x0 0x5 0x0 +#define IOMUXC_GPIO_DISP_B2_09_ENET_QOS_RX_ER 0x238 0x47C 0x4FC 0x8 0x1 +#define IOMUXC_GPIO_DISP_B2_09_LPUART1_RXD 0x238 0x47C 0x61C 0x9 0x2 + +#define IOMUXC_GPIO_DISP_B2_10_GPIO11_IO11 0x23C 0x480 0x0 0xA 0x0 +#define IOMUXC_GPIO_DISP_B2_10_VIDEO_MUX_LCDIF_DATA18 0x23C 0x480 0x0 0x0 0x0 +#define IOMUXC_GPIO_DISP_B2_10_EMVSIM2_IO 0x23C 0x480 0x6A8 0x1 0x1 +#define IOMUXC_GPIO_DISP_B2_10_LPUART2_TXD 0x23C 0x480 0x0 0x2 0x0 +#define IOMUXC_GPIO_DISP_B2_10_WDOG2_RESET_B_DEB 0x23C 0x480 0x0 0x3 0x0 +#define IOMUXC_GPIO_DISP_B2_10_XBAR1_INOUT38 0x23C 0x480 0x0 0x4 0x0 +#define IOMUXC_GPIO_DISP_B2_10_GPIO_MUX5_IO11 0x23C 0x480 0x0 0x5 0x0 +#define IOMUXC_GPIO_DISP_B2_10_LPI2C3_SCL 0x23C 0x480 0x5BC 0x6 0x1 +#define IOMUXC_GPIO_DISP_B2_10_ENET_QOS_RX_ER 0x23C 0x480 0x4FC 0x8 0x2 +#define IOMUXC_GPIO_DISP_B2_10_SPDIF_IN 0x23C 0x480 0x6B4 0x9 0x2 + +#define IOMUXC_GPIO_DISP_B2_11_VIDEO_MUX_LCDIF_DATA19 0x240 0x484 0x0 0x0 0x0 +#define IOMUXC_GPIO_DISP_B2_11_EMVSIM2_CLK 0x240 0x484 0x0 0x1 0x0 +#define IOMUXC_GPIO_DISP_B2_11_LPUART2_RXD 0x240 0x484 0x0 0x2 0x0 +#define IOMUXC_GPIO_DISP_B2_11_WDOG1_RESET_B_DEB 0x240 0x484 0x0 0x3 0x0 +#define IOMUXC_GPIO_DISP_B2_11_XBAR1_INOUT39 0x240 0x484 0x0 0x4 0x0 +#define IOMUXC_GPIO_DISP_B2_11_GPIO_MUX5_IO12 0x240 0x484 0x0 0x5 0x0 +#define IOMUXC_GPIO_DISP_B2_11_LPI2C3_SDA 0x240 0x484 0x5C0 0x6 0x1 +#define IOMUXC_GPIO_DISP_B2_11_ENET_QOS_CRS 0x240 0x484 0x0 0x8 0x0 +#define IOMUXC_GPIO_DISP_B2_11_SPDIF_OUT 0x240 0x484 0x0 0x9 0x0 +#define IOMUXC_GPIO_DISP_B2_11_GPIO11_IO12 0x240 0x484 0x0 0xA 0x0 + +#define IOMUXC_GPIO_DISP_B2_12_GPIO11_IO13 0x244 0x488 0x0 0xA 0x0 +#define IOMUXC_GPIO_DISP_B2_12_VIDEO_MUX_LCDIF_DATA20 0x244 0x488 0x0 0x0 0x0 +#define IOMUXC_GPIO_DISP_B2_12_EMVSIM2_RST 0x244 0x488 0x0 0x1 0x0 +#define IOMUXC_GPIO_DISP_B2_12_FLEXCAN1_TX 0x244 0x488 0x0 0x2 0x0 +#define IOMUXC_GPIO_DISP_B2_12_LPUART2_CTS_B 0x244 0x488 0x0 0x3 0x0 +#define IOMUXC_GPIO_DISP_B2_12_XBAR1_INOUT40 0x244 0x488 0x0 0x4 0x0 +#define IOMUXC_GPIO_DISP_B2_12_GPIO_MUX5_IO13 0x244 0x488 0x0 0x5 0x0 +#define IOMUXC_GPIO_DISP_B2_12_LPI2C4_SCL 0x244 0x488 0x5C4 0x6 0x1 +#define IOMUXC_GPIO_DISP_B2_12_ENET_QOS_COL 0x244 0x488 0x0 0x8 0x0 +#define IOMUXC_GPIO_DISP_B2_12_LPSPI4_SCK 0x244 0x488 0x610 0x9 0x1 + +#define IOMUXC_GPIO_DISP_B2_13_GPIO11_IO14 0x248 0x48C 0x0 0xA 0x0 +#define IOMUXC_GPIO_DISP_B2_13_VIDEO_MUX_LCDIF_DATA21 0x248 0x48C 0x0 0x0 0x0 +#define IOMUXC_GPIO_DISP_B2_13_EMVSIM2_SVEN 0x248 0x48C 0x0 0x1 0x0 +#define IOMUXC_GPIO_DISP_B2_13_FLEXCAN1_RX 0x248 0x48C 0x498 0x2 0x1 +#define IOMUXC_GPIO_DISP_B2_13_LPUART2_RTS_B 0x248 0x48C 0x0 0x3 0x0 +#define IOMUXC_GPIO_DISP_B2_13_ENET_REF_CLK 0x248 0x48C 0x4A8 0x4 0x2 +#define IOMUXC_GPIO_DISP_B2_13_GPIO_MUX5_IO14 0x248 0x48C 0x0 0x5 0x0 +#define IOMUXC_GPIO_DISP_B2_13_LPI2C4_SDA 0x248 0x48C 0x5C8 0x6 0x1 +#define IOMUXC_GPIO_DISP_B2_13_ENET_QOS_1588_EVENT0_OUT 0x248 0x48C 0x0 0x8 0x0 +#define IOMUXC_GPIO_DISP_B2_13_LPSPI4_SIN 0x248 0x48C 0x614 0x9 0x1 + +#define IOMUXC_GPIO_DISP_B2_14_GPIO_MUX5_IO15 0x24C 0x490 0x0 0x5 0x0 +#define IOMUXC_GPIO_DISP_B2_14_FLEXCAN1_TX 0x24C 0x490 0x0 0x6 0x0 +#define IOMUXC_GPIO_DISP_B2_14_ENET_QOS_1588_EVENT0_IN 0x24C 0x490 0x0 0x8 0x0 +#define IOMUXC_GPIO_DISP_B2_14_LPSPI4_SOUT 0x24C 0x490 0x618 0x9 0x1 +#define IOMUXC_GPIO_DISP_B2_14_GPIO11_IO15 0x24C 0x490 0x0 0xA 0x0 +#define IOMUXC_GPIO_DISP_B2_14_VIDEO_MUX_LCDIF_DATA22 0x24C 0x490 0x0 0x0 0x0 +#define IOMUXC_GPIO_DISP_B2_14_EMVSIM2_PD 0x24C 0x490 0x6AC 0x1 0x1 +#define IOMUXC_GPIO_DISP_B2_14_WDOG2_B 0x24C 0x490 0x0 0x2 0x0 +#define IOMUXC_GPIO_DISP_B2_14_VIDEO_MUX_EXT_DCIC1 0x24C 0x490 0x0 0x3 0x0 +#define IOMUXC_GPIO_DISP_B2_14_ENET_1G_REF_CLK 0x24C 0x490 0x4C4 0x4 0x3 + +#define IOMUXC_GPIO_DISP_B2_15_VIDEO_MUX_LCDIF_DATA23 0x250 0x494 0x0 0x0 0x0 +#define IOMUXC_GPIO_DISP_B2_15_EMVSIM2_POWER_FAIL 0x250 0x494 0x6B0 0x1 0x1 +#define IOMUXC_GPIO_DISP_B2_15_WDOG1_B 0x250 0x494 0x0 0x2 0x0 +#define IOMUXC_GPIO_DISP_B2_15_VIDEO_MUX_EXT_DCIC2 0x250 0x494 0x0 0x3 0x0 +#define IOMUXC_GPIO_DISP_B2_15_PIT1_TRIGGER0 0x250 0x494 0x0 0x4 0x0 +#define IOMUXC_GPIO_DISP_B2_15_GPIO_MUX5_IO16 0x250 0x494 0x0 0x5 0x0 +#define IOMUXC_GPIO_DISP_B2_15_FLEXCAN1_RX 0x250 0x494 0x498 0x6 0x2 +#define IOMUXC_GPIO_DISP_B2_15_ENET_QOS_1588_EVENT0_AUX_IN 0x250 0x494 0x0 0x8 0x0 +#define IOMUXC_GPIO_DISP_B2_15_LPSPI4_PCS0 0x250 0x494 0x60C 0x9 0x1 +#define IOMUXC_GPIO_DISP_B2_15_GPIO11_IO16 0x250 0x494 0x0 0xA 0x0 + +#endif /* _DT_BINDINGS_PINCTRL_IMXRT1170_PINFUNC_H */ diff --git a/dts/src/arm/keystone-k2e-netcp.dtsi b/dts/src/arm/keystone-k2e-netcp.dtsi index 71064483d3..42cf74db67 100644 --- a/dts/src/arm/keystone-k2e-netcp.dtsi +++ b/dts/src/arm/keystone-k2e-netcp.dtsi @@ -12,9 +12,9 @@ qmss: qmss@2a40000 { #size-cells = <1>; clocks = <&chipclk13>; ranges; - queue-range = <0 0x2000>; - linkram0 = <0x100000 0x4000>; - linkram1 = <0 0x10000>; + queue-range = <0 0x2000>; + linkram0 = <0x100000 0x4000>; + linkram1 = <0 0x10000>; qmgrs { #address-cells = <1>; @@ -176,40 +176,40 @@ netcp: netcp@24000000 { interfaces { gbe0: interface-0 { slave-port = <0>; - link-interface = <1>; - phy-handle = <ðphy0>; + link-interface = <1>; + phy-handle = <ðphy0>; }; gbe1: interface-1 { slave-port = <1>; - link-interface = <1>; - phy-handle = <ðphy1>; + link-interface = <1>; + phy-handle = <ðphy1>; }; }; secondary-slave-ports { port-2 { slave-port = <2>; - link-interface = <2>; + link-interface = <2>; }; port-3 { slave-port = <3>; - link-interface = <2>; + link-interface = <2>; }; port-4 { slave-port = <4>; - link-interface = <2>; + link-interface = <2>; }; port-5 { slave-port = <5>; - link-interface = <2>; + link-interface = <2>; }; port-6 { slave-port = <6>; - link-interface = <2>; + link-interface = <2>; }; port-7 { slave-port = <7>; - link-interface = <2>; + link-interface = <2>; }; }; }; diff --git a/dts/src/arm/keystone-k2e.dtsi b/dts/src/arm/keystone-k2e.dtsi index b8f152e7af..65c32946c5 100644 --- a/dts/src/arm/keystone-k2e.dtsi +++ b/dts/src/arm/keystone-k2e.dtsi @@ -141,7 +141,7 @@ clock-names = "pcie"; #address-cells = <3>; #size-cells = <2>; - reg = <0x21021000 0x2000>, <0x21020000 0x1000>, <0x02620128 4>; + reg = <0x21021000 0x2000>, <0x21020000 0x1000>, <0x02620128 4>; ranges = <0x82000000 0 0x60000000 0x60000000 0 0x10000000>; @@ -185,14 +185,14 @@ }; mdio: mdio@24200f00 { - compatible = "ti,keystone_mdio", "ti,davinci_mdio"; + compatible = "ti,keystone_mdio", "ti,davinci_mdio"; #address-cells = <1>; #size-cells = <0>; reg = <0x24200f00 0x100>; status = "disabled"; clocks = <&clkcpgmac>; clock-names = "fck"; - bus_freq = <2500000>; + bus_freq = <2500000>; }; /include/ "keystone-k2e-netcp.dtsi" }; diff --git a/dts/src/arm/keystone-k2g-netcp.dtsi b/dts/src/arm/keystone-k2g-netcp.dtsi index d0e6a9a434..f6306933ff 100644 --- a/dts/src/arm/keystone-k2g-netcp.dtsi +++ b/dts/src/arm/keystone-k2g-netcp.dtsi @@ -125,7 +125,7 @@ netcp: netcp@4000000 { interfaces { gbe0: interface-0 { slave-port = <0>; - link-interface = <5>; + link-interface = <5>; }; }; }; diff --git a/dts/src/arm/keystone-k2g.dtsi b/dts/src/arm/keystone-k2g.dtsi index 37198294f4..380dd9d637 100644 --- a/dts/src/arm/keystone-k2g.dtsi +++ b/dts/src/arm/keystone-k2g.dtsi @@ -262,7 +262,7 @@ */ ti,system-reboot-controller; mbox-names = "rx", "tx"; - mboxes= <&msgmgr 5 2>, + mboxes = <&msgmgr 5 2>, <&msgmgr 0 0>; reg-names = "debug_messages"; reg = <0x02921c00 0x400>; @@ -326,13 +326,13 @@ dss: dss@02540000 { compatible = "ti,k2g-dss"; - reg = <0x02540000 0x400>, + reg = <0x02540000 0x400>, <0x02550000 0x1000>, <0x02557000 0x1000>, <0x0255a800 0x100>, <0x0255ac00 0x100>; reg-names = "cfg", "common", "vid1", "ovr1", "vp1"; - clocks = <&k2g_clks 0x2 0>, + clocks = <&k2g_clks 0x2 0>, <&k2g_clks 0x2 1>; clock-names = "fck", "vp1"; interrupts = <GIC_SPI 247 IRQ_TYPE_EDGE_RISING>; @@ -348,7 +348,7 @@ edma0: edma@2700000 { compatible = "ti,k2g-edma3-tpcc", "ti,edma3-tpcc"; - reg = <0x02700000 0x8000>; + reg = <0x02700000 0x8000>; reg-names = "edma3_cc"; interrupts = <GIC_SPI 200 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 216 IRQ_TYPE_EDGE_RISING>, @@ -367,19 +367,19 @@ edma0_tptc0: tptc@2760000 { compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc"; - reg = <0x02760000 0x400>; + reg = <0x02760000 0x400>; power-domains = <&k2g_pds 0x3f>; }; edma0_tptc1: tptc@2768000 { compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc"; - reg = <0x02768000 0x400>; + reg = <0x02768000 0x400>; power-domains = <&k2g_pds 0x3f>; }; edma1: edma@2728000 { compatible = "ti,k2g-edma3-tpcc", "ti,edma3-tpcc"; - reg = <0x02728000 0x8000>; + reg = <0x02728000 0x8000>; reg-names = "edma3_cc"; interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 219 IRQ_TYPE_EDGE_RISING>, @@ -402,13 +402,13 @@ edma1_tptc0: tptc@27b0000 { compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc"; - reg = <0x027b0000 0x400>; + reg = <0x027b0000 0x400>; power-domains = <&k2g_pds 0x4f>; }; edma1_tptc1: tptc@27b8000 { compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc"; - reg = <0x027b8000 0x400>; + reg = <0x027b8000 0x400>; power-domains = <&k2g_pds 0x4f>; }; diff --git a/dts/src/arm/keystone-k2hk-netcp.dtsi b/dts/src/arm/keystone-k2hk-netcp.dtsi index 022d93c366..8a421c65f9 100644 --- a/dts/src/arm/keystone-k2hk-netcp.dtsi +++ b/dts/src/arm/keystone-k2hk-netcp.dtsi @@ -12,9 +12,9 @@ qmss: qmss@2a40000 { #size-cells = <1>; clocks = <&chipclk13>; ranges; - queue-range = <0 0x4000>; - linkram0 = <0x100000 0x8000>; - linkram1 = <0x0 0x10000>; + queue-range = <0 0x4000>; + linkram0 = <0x100000 0x8000>; + linkram1 = <0x0 0x10000>; qmgrs { #address-cells = <1>; @@ -150,7 +150,7 @@ netcp: netcp@2000000 { #size-cells = <1>; /* NetCP address range */ - ranges = <0 0x2000000 0x100000>; + ranges = <0 0x2000000 0x100000>; clocks = <&clkpa>, <&clkcpgmac>; clock-names = "pa_clk", "ethss_clk"; @@ -207,11 +207,11 @@ netcp: netcp@2000000 { secondary-slave-ports { port-2 { slave-port = <2>; - link-interface = <2>; + link-interface = <2>; }; port-3 { slave-port = <3>; - link-interface = <2>; + link-interface = <2>; }; }; }; diff --git a/dts/src/arm/keystone-k2hk.dtsi b/dts/src/arm/keystone-k2hk.dtsi index 8a94477033..da6d3934c2 100644 --- a/dts/src/arm/keystone-k2hk.dtsi +++ b/dts/src/arm/keystone-k2hk.dtsi @@ -282,14 +282,14 @@ }; mdio: mdio@2090300 { - compatible = "ti,keystone_mdio", "ti,davinci_mdio"; + compatible = "ti,keystone_mdio", "ti,davinci_mdio"; #address-cells = <1>; #size-cells = <0>; reg = <0x02090300 0x100>; status = "disabled"; clocks = <&clkcpgmac>; clock-names = "fck"; - bus_freq = <2500000>; + bus_freq = <2500000>; }; /include/ "keystone-k2hk-netcp.dtsi" }; diff --git a/dts/src/arm/keystone-k2l-netcp.dtsi b/dts/src/arm/keystone-k2l-netcp.dtsi index e96ca664ab..5ec6680a53 100644 --- a/dts/src/arm/keystone-k2l-netcp.dtsi +++ b/dts/src/arm/keystone-k2l-netcp.dtsi @@ -12,9 +12,9 @@ qmss: qmss@2a40000 { #size-cells = <1>; clocks = <&chipclk13>; ranges; - queue-range = <0 0x2000>; - linkram0 = <0x100000 0x4000>; - linkram1 = <0x70000000 0x10000>; /* 1MB OSR mem */ + queue-range = <0 0x2000>; + linkram0 = <0x100000 0x4000>; + linkram1 = <0x70000000 0x10000>; /* 1MB OSR mem */ qmgrs { #address-cells = <1>; @@ -174,24 +174,24 @@ netcp: netcp@26000000 { interfaces { gbe0: interface-0 { slave-port = <0>; - link-interface = <1>; - phy-handle = <ðphy0>; + link-interface = <1>; + phy-handle = <ðphy0>; }; gbe1: interface-1 { slave-port = <1>; - link-interface = <1>; - phy-handle = <ðphy1>; + link-interface = <1>; + phy-handle = <ðphy1>; }; }; secondary-slave-ports { port-2 { slave-port = <2>; - link-interface = <2>; + link-interface = <2>; }; port-3 { slave-port = <3>; - link-interface = <2>; + link-interface = <2>; }; }; }; diff --git a/dts/src/arm/keystone-k2l.dtsi b/dts/src/arm/keystone-k2l.dtsi index dff5fea72b..421a02bbc9 100644 --- a/dts/src/arm/keystone-k2l.dtsi +++ b/dts/src/arm/keystone-k2l.dtsi @@ -47,7 +47,7 @@ reg-shift = <2>; reg-io-width = <4>; reg = <0x02348400 0x100>; - clocks = <&clkuart2>; + clocks = <&clkuart2>; interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>; }; @@ -57,7 +57,7 @@ reg-shift = <2>; reg-io-width = <4>; reg = <0x02348800 0x100>; - clocks = <&clkuart3>; + clocks = <&clkuart3>; interrupts = <GIC_SPI 435 IRQ_TYPE_EDGE_RISING>; }; @@ -388,14 +388,14 @@ }; mdio: mdio@26200f00 { - compatible = "ti,keystone_mdio", "ti,davinci_mdio"; + compatible = "ti,keystone_mdio", "ti,davinci_mdio"; #address-cells = <1>; #size-cells = <0>; reg = <0x26200f00 0x100>; status = "disabled"; clocks = <&clkcpgmac>; clock-names = "fck"; - bus_freq = <2500000>; + bus_freq = <2500000>; }; /include/ "keystone-k2l-netcp.dtsi" }; diff --git a/dts/src/arm/keystone.dtsi b/dts/src/arm/keystone.dtsi index fc9fdc857a..50789f9e22 100644 --- a/dts/src/arm/keystone.dtsi +++ b/dts/src/arm/keystone.dtsi @@ -14,7 +14,7 @@ interrupt-parent = <&gic>; aliases { - serial0 = &uart0; + serial0 = &uart0; spi0 = &spi0; spi1 = &spi1; spi2 = &spi2; @@ -61,11 +61,11 @@ }; psci { - compatible = "arm,psci"; - method = "smc"; - cpu_suspend = <0x84000001>; - cpu_off = <0x84000002>; - cpu_on = <0x84000003>; + compatible = "arm,psci"; + method = "smc"; + cpu_suspend = <0x84000001>; + cpu_off = <0x84000002>; + cpu_on = <0x84000003>; }; soc0: soc@0 { @@ -119,7 +119,7 @@ reg-shift = <2>; reg-io-width = <4>; reg = <0x02530c00 0x100>; - clocks = <&clkuart0>; + clocks = <&clkuart0>; interrupts = <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>; }; @@ -129,7 +129,7 @@ reg-shift = <2>; reg-io-width = <4>; reg = <0x02531000 0x100>; - clocks = <&clkuart1>; + clocks = <&clkuart1>; interrupts = <GIC_SPI 280 IRQ_TYPE_EDGE_RISING>; }; @@ -301,7 +301,7 @@ clock-names = "pcie"; #address-cells = <3>; #size-cells = <2>; - reg = <0x21801000 0x2000>, <0x21800000 0x1000>, <0x02620128 4>; + reg = <0x21801000 0x2000>, <0x21800000 0x1000>, <0x02620128 4>; ranges = <0x82000000 0 0x50000000 0x50000000 0 0x10000000>; diff --git a/dts/src/arm/lan966x-kontron-kswitch-d10-mmt.dtsi b/dts/src/arm/lan966x-kontron-kswitch-d10-mmt.dtsi index 725dcf707b..0097e72e3f 100644 --- a/dts/src/arm/lan966x-kontron-kswitch-d10-mmt.dtsi +++ b/dts/src/arm/lan966x-kontron-kswitch-d10-mmt.dtsi @@ -76,6 +76,12 @@ pins = "GPIO_25", "GPIO_26"; function = "fc0_b"; }; + + usbs_a_pins: usbs-a-pins { + /* VBUS_DET */ + pins = "GPIO_66"; + function = "gpio"; + }; }; &mdio0 { @@ -185,6 +191,13 @@ status = "okay"; }; +&udc { + pinctrl-0 = <&usbs_a_pins>; + pinctrl-names = "default"; + atmel,vbus-gpio = <&gpio 66 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + &watchdog { status = "okay"; }; diff --git a/dts/src/arm/lan966x-pcb8291.dts b/dts/src/arm/lan966x-pcb8291.dts index 3c7e3a7d6f..24d9055c4a 100644 --- a/dts/src/arm/lan966x-pcb8291.dts +++ b/dts/src/arm/lan966x-pcb8291.dts @@ -4,6 +4,7 @@ */ /dts-v1/; #include "lan966x.dtsi" +#include "dt-bindings/phy/phy-lan966x-serdes.h" / { model = "Microchip EVB - LAN9662"; @@ -16,22 +17,18 @@ aliases { serial0 = &usart3; }; -}; - -&gpio { - fc_shrd7_pins: fc_shrd7-pins { - pins = "GPIO_49"; - function = "fc_shrd7"; - }; - fc_shrd8_pins: fc_shrd8-pins { - pins = "GPIO_54"; - function = "fc_shrd8"; + gpio-restart { + compatible = "gpio-restart"; + gpios = <&gpio 56 GPIO_ACTIVE_LOW>; + priority = <200>; }; +}; - fc3_b_pins: fcb3-spi-pins { - /* SCK, RXD, TXD */ - pins = "GPIO_51", "GPIO_52", "GPIO_53"; +&gpio { + fc3_b_pins: fc3-b-pins { + /* RX, TX */ + pins = "GPIO_52", "GPIO_53"; function = "fc3_b"; }; @@ -45,7 +42,7 @@ &can0 { pinctrl-0 = <&can0_b_pins>; pinctrl-names = "default"; - status = "okay"; + status = "disabled"; /* Conflict with switch */ }; &flx3 { @@ -53,12 +50,46 @@ status = "okay"; usart3: serial@200 { - pinctrl-0 = <&fc3_b_pins>, <&fc_shrd7_pins>, <&fc_shrd8_pins>; + pinctrl-0 = <&fc3_b_pins>; pinctrl-names = "default"; status = "okay"; }; }; +&mdio1 { + status = "okay"; +}; + +&phy0 { + status = "okay"; +}; + +&phy1 { + status = "okay"; +}; + +&port0 { + phy-handle = <&phy0>; + phy-mode = "gmii"; + phys = <&serdes 0 CU(0)>; + status = "okay"; +}; + +&port1 { + phy-handle = <&phy1>; + phy-mode = "gmii"; + phys = <&serdes 1 CU(1)>; + status = "okay"; +}; + +&serdes { + status = "okay"; +}; + +&switch { + status = "okay"; +}; + &watchdog { status = "okay"; }; diff --git a/dts/src/arm/lan966x-pcb8309.dts b/dts/src/arm/lan966x-pcb8309.dts new file mode 100644 index 0000000000..05ce27ed56 --- /dev/null +++ b/dts/src/arm/lan966x-pcb8309.dts @@ -0,0 +1,184 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * lan966x_pcb8309.dts - Device Tree file for PCB8309 + */ +/dts-v1/; +#include "lan966x.dtsi" +#include "dt-bindings/phy/phy-lan966x-serdes.h" + +/ { + model = "Microchip EVB - LAN9662"; + compatible = "microchip,lan9662-pcb8309", "microchip,lan9662", "microchip,lan966"; + + aliases { + serial0 = &usart3; + i2c102 = &i2c102; + i2c103 = &i2c103; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-restart { + compatible = "gpio-restart"; + gpios = <&gpio 56 GPIO_ACTIVE_LOW>; + priority = <200>; + }; + + i2c-mux { + compatible = "i2c-mux"; + #address-cells = <1>; + #size-cells = <0>; + mux-controls = <&mux>; + i2c-parent = <&i2c4>; + + i2c102: i2c-sfp@1 { + reg = <1>; + }; + + i2c103: i2c-sfp@2 { + reg = <2>; + }; + }; + + mux: mux-controller { + compatible = "gpio-mux"; + #mux-control-cells = <0>; + + mux-gpios = <&sgpio_out 11 0 GPIO_ACTIVE_HIGH>, /* p11b0 */ + <&sgpio_out 11 1 GPIO_ACTIVE_HIGH>; /* p11b1 */ + }; + + sfp2: sfp2 { + compatible = "sff,sfp"; + i2c-bus = <&i2c102>; + tx-disable-gpios = <&sgpio_out 10 0 GPIO_ACTIVE_LOW>; + los-gpios = <&sgpio_in 2 0 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in 2 1 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in 1 0 GPIO_ACTIVE_HIGH>; + }; + + sfp3: sfp3 { + compatible = "sff,sfp"; + i2c-bus = <&i2c103>; + tx-disable-gpios = <&sgpio_out 10 1 GPIO_ACTIVE_LOW>; + los-gpios = <&sgpio_in 3 0 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in 3 1 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in 1 1 GPIO_ACTIVE_HIGH>; + }; +}; + +&flx3 { + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>; + status = "okay"; + + usart3: serial@200 { + pinctrl-0 = <&fc3_b_pins>; + pinctrl-names = "default"; + status = "okay"; + }; +}; + +&flx4 { + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>; + status = "okay"; + + i2c4: i2c@600 { + compatible = "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&nic_clk>; + pinctrl-0 = <&fc4_b_pins>; + pinctrl-names = "default"; + i2c-analog-filter; + i2c-digital-filter; + i2c-digital-filter-width-ns = <35>; + i2c-sda-hold-time-ns = <1500>; + status = "okay"; + }; +}; + +&gpio { + fc3_b_pins: fc3-b-pins { + /* RXD, TXD */ + pins = "GPIO_52", "GPIO_53"; + function = "fc3_b"; + }; + + fc4_b_pins: fc4-b-pins { + /* SCL, SDA */ + pins = "GPIO_57", "GPIO_58"; + function = "fc4_b"; + }; + + sgpio_a_pins: sgpio-a-pins { + /* SCK, D0, D1, LD */ + pins = "GPIO_32", "GPIO_33", "GPIO_34", "GPIO_35"; + function = "sgpio_a"; + }; +}; + +&mdio1 { + status = "okay"; +}; + +&phy0 { + status = "okay"; +}; + +&phy1 { + status = "okay"; +}; + +&port0 { + phy-handle = <&phy0>; + phy-mode = "gmii"; + phys = <&serdes 0 CU(0)>; + status = "okay"; +}; + +&port1 { + phy-handle = <&phy1>; + phy-mode = "gmii"; + phys = <&serdes 1 CU(1)>; + status = "okay"; +}; + +&port2 { + sfp = <&sfp2>; + managed = "in-band-status"; + phy-mode = "sgmii"; + phys = <&serdes 2 SERDES6G(0)>; + status = "okay"; +}; + +&port3 { + sfp = <&sfp3>; + managed = "in-band-status"; + phy-mode = "sgmii"; + phys = <&serdes 3 SERDES6G(1)>; + status = "okay"; +}; + +&serdes { + status = "okay"; +}; + +&sgpio { + pinctrl-0 = <&sgpio_a_pins>; + pinctrl-names = "default"; + microchip,sgpio-port-ranges = <0 3>, <8 11>; + status = "okay"; + + gpio@0 { + ngpios = <64>; + }; + gpio@1 { + ngpios = <64>; + }; +}; + +&switch { + status = "okay"; +}; diff --git a/dts/src/arm/lan966x.dtsi b/dts/src/arm/lan966x.dtsi index 38e90a31d2..894bf9da19 100644 --- a/dts/src/arm/lan966x.dtsi +++ b/dts/src/arm/lan966x.dtsi @@ -65,7 +65,7 @@ #clock-cells = <1>; clocks = <&cpu_clk>, <&ddr_clk>, <&sys_clk>; clock-names = "cpu", "ddr", "sys"; - reg = <0xe00c00a8 0x38>; + reg = <0xe00c00a8 0x38>, <0xe00c02cc 0x4>; }; timer { @@ -84,6 +84,17 @@ #size-cells = <1>; ranges; + udc: usb@200000 { + compatible = "microchip,lan9662-udc", + "atmel,sama5d3-udc"; + reg = <0x00200000 0x80000>, + <0xe0808000 0x400>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks GCK_GATE_UDPHS>, <&nic_clk>; + clock-names = "pclk", "hclk"; + status = "disabled"; + }; + switch: switch@e0000000 { compatible = "microchip,lan966x-switch"; reg = <0xe0000000 0x0100000>, @@ -473,6 +484,21 @@ status = "disabled"; }; + can1: can@e0820000 { + compatible = "bosch,m_can"; + reg = <0xe0820000 0xfc>, <0x00100000 0x8000>; + reg-names = "m_can", "message_ram"; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + clocks = <&clks GCK_ID_MCAN1>, <&clks GCK_ID_MCAN1>; + clock-names = "hclk", "cclk"; + assigned-clocks = <&clks GCK_ID_MCAN1>; + assigned-clock-rates = <40000000>; + bosch,mram-cfg = <0x4000 0 0 64 0 0 32 32>; + status = "disabled"; + }; + reset: reset-controller@e200400c { compatible = "microchip,lan966x-switch-reset"; reg = <0xe200400c 0x4>; diff --git a/dts/src/arm/lpc18xx.dtsi b/dts/src/arm/lpc18xx.dtsi index 10b8249b8a..1bb686a7b3 100644 --- a/dts/src/arm/lpc18xx.dtsi +++ b/dts/src/arm/lpc18xx.dtsi @@ -121,7 +121,7 @@ status = "disabled"; }; - usb0: ehci@40006100 { + usb0: usb@40006100 { compatible = "nxp,lpc1850-ehci", "generic-ehci"; reg = <0x40006100 0x100>; interrupts = <8>; @@ -133,7 +133,7 @@ status = "disabled"; }; - usb1: ehci@40007100 { + usb1: usb@40007100 { compatible = "nxp,lpc1850-ehci", "generic-ehci"; reg = <0x40007100 0x100>; interrupts = <9>; @@ -183,7 +183,7 @@ compatible = "nxp,lpc1850-dwmac", "snps,dwmac-3.611", "snps,dwmac"; reg = <0x40010000 0x2000>; interrupts = <5>; - interrupt-names = "macirq"; + interrupt-names = "macirq"; clocks = <&ccu1 CLK_CPU_ETHERNET>; clock-names = "stmmaceth"; resets = <&rgu 22>; diff --git a/dts/src/arm/ls1021a-iot.dts b/dts/src/arm/ls1021a-iot.dts index 66bcdaf4b6..ce8e26d779 100644 --- a/dts/src/arm/ls1021a-iot.dts +++ b/dts/src/arm/ls1021a-iot.dts @@ -142,7 +142,7 @@ }; sgtl5000: audio-codec@2a { - #sound-dai-cells=<0x0>; + #sound-dai-cells = <0x0>; compatible = "fsl,sgtl5000"; reg = <0x2a>; VDDA-supply = <®_3p3v>; diff --git a/dts/src/arm/ls1021a.dtsi b/dts/src/arm/ls1021a.dtsi index 6c88be2a7e..fa761620f0 100644 --- a/dts/src/arm/ls1021a.dtsi +++ b/dts/src/arm/ls1021a.dtsi @@ -129,6 +129,13 @@ status = "disabled"; }; + sfp: efuse@1e80000 { + compatible = "fsl,ls1021a-sfp"; + reg = <0x0 0x1e80000 0x0 0x10000>; + clocks = <&clockgen 4 3>; + clock-names = "sfp"; + }; + dcfg: dcfg@1ee0000 { compatible = "fsl,ls1021a-dcfg", "syscon"; reg = <0x0 0x1ee0000 0x0 0x1000>; diff --git a/dts/src/arm/meson.dtsi b/dts/src/arm/meson.dtsi index 26eaba3fa9..8e3860d5d9 100644 --- a/dts/src/arm/meson.dtsi +++ b/dts/src/arm/meson.dtsi @@ -214,14 +214,14 @@ ranges = <0x0 0xc8100000 0x100000>; ao_arc_rproc: remoteproc@1c { - compatible= "amlogic,meson-mx-ao-arc"; + compatible = "amlogic,meson-mx-ao-arc"; reg = <0x1c 0x8>, <0x38 0x8>; reg-names = "remap", "cpu"; status = "disabled"; }; ir_receiver: ir-receiver@480 { - compatible= "amlogic,meson6-ir"; + compatible = "amlogic,meson6-ir"; reg = <0x480 0x20>; interrupts = <GIC_SPI 15 IRQ_TYPE_EDGE_RISING>; status = "disabled"; diff --git a/dts/src/arm/meson8.dtsi b/dts/src/arm/meson8.dtsi index 9997a5d033..0f8bac8bac 100644 --- a/dts/src/arm/meson8.dtsi +++ b/dts/src/arm/meson8.dtsi @@ -430,7 +430,7 @@ }; &ao_arc_rproc { - compatible= "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc"; + compatible = "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc"; amlogic,secbus2 = <&secbus2>; sram = <&ao_arc_sram>; resets = <&reset RESET_MEDIA_CPU>; diff --git a/dts/src/arm/meson8b.dtsi b/dts/src/arm/meson8b.dtsi index 94f1c03dec..cf9c04a61b 100644 --- a/dts/src/arm/meson8b.dtsi +++ b/dts/src/arm/meson8b.dtsi @@ -384,7 +384,7 @@ }; &ao_arc_rproc { - compatible= "amlogic,meson8b-ao-arc", "amlogic,meson-mx-ao-arc"; + compatible = "amlogic,meson8b-ao-arc", "amlogic,meson-mx-ao-arc"; amlogic,secbus2 = <&secbus2>; sram = <&ao_arc_sram>; resets = <&reset RESET_MEDIA_CPU>; diff --git a/dts/src/arm/mt2701.dtsi b/dts/src/arm/mt2701.dtsi index ef583cfd3b..b8eba3ba15 100644 --- a/dts/src/arm/mt2701.dtsi +++ b/dts/src/arm/mt2701.dtsi @@ -427,9 +427,9 @@ afe: audio-controller { compatible = "mediatek,mt2701-audio"; - interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>, + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>, <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>; - interrupt-names = "afe", "asys"; + interrupt-names = "afe", "asys"; power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>; clocks = <&infracfg CLK_INFRA_AUDIO>, @@ -559,7 +559,7 @@ compatible = "mediatek,mt2701-jpgdec"; reg = <0 0x15004000 0 0x1000>; interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>; - clocks = <&imgsys CLK_IMG_JPGDEC_SMI>, + clocks = <&imgsys CLK_IMG_JPGDEC_SMI>, <&imgsys CLK_IMG_JPGDEC>; clock-names = "jpgdec-smi", "jpgdec"; @@ -573,7 +573,7 @@ "mediatek,mtk-jpgenc"; reg = <0 0x1500a000 0 0x1000>; interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_LOW>; - clocks = <&imgsys CLK_IMG_VENC>; + clocks = <&imgsys CLK_IMG_VENC>; clock-names = "jpgenc"; power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>; iommus = <&iommu MT2701_M4U_PORT_JPGENC_RDMA>, diff --git a/dts/src/arm/mt7623.dtsi b/dts/src/arm/mt7623.dtsi index f4848362b3..25d31e40a5 100644 --- a/dts/src/arm/mt7623.dtsi +++ b/dts/src/arm/mt7623.dtsi @@ -241,7 +241,7 @@ }; pericfg: syscon@10003000 { - compatible = "mediatek,mt7623-pericfg", + compatible = "mediatek,mt7623-pericfg", "mediatek,mt2701-pericfg", "syscon"; reg = <0 0x10003000 0 0x1000>; @@ -628,9 +628,9 @@ afe: audio-controller { compatible = "mediatek,mt7623-audio", "mediatek,mt2701-audio"; - interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>, + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>, <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>; - interrupt-names = "afe", "asys"; + interrupt-names = "afe", "asys"; power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>; clocks = <&infracfg CLK_INFRA_AUDIO>, diff --git a/dts/src/arm/mt7623a-rfb-emmc.dts b/dts/src/arm/mt7623a-rfb-emmc.dts index 13c86936d1..e8b4b6d30d 100644 --- a/dts/src/arm/mt7623a-rfb-emmc.dts +++ b/dts/src/arm/mt7623a-rfb-emmc.dts @@ -45,13 +45,13 @@ pinctrl-names = "default"; pinctrl-0 = <&key_pins_a>; - factory { + button-factory { label = "factory"; linux,code = <BTN_0>; gpios = <&pio 256 GPIO_ACTIVE_LOW>; }; - wps { + button-wps { label = "wps"; linux,code = <KEY_WPS_BUTTON>; gpios = <&pio 257 GPIO_ACTIVE_HIGH>; diff --git a/dts/src/arm/mt7623a-rfb-nand.dts b/dts/src/arm/mt7623a-rfb-nand.dts index 88d8f0b2f4..61f5da68d4 100644 --- a/dts/src/arm/mt7623a-rfb-nand.dts +++ b/dts/src/arm/mt7623a-rfb-nand.dts @@ -45,13 +45,13 @@ pinctrl-names = "default"; pinctrl-0 = <&key_pins_a>; - factory { + button-factory { label = "factory"; linux,code = <BTN_0>; gpios = <&pio 256 GPIO_ACTIVE_LOW>; }; - wps { + button-wps { label = "wps"; linux,code = <KEY_WPS_BUTTON>; gpios = <&pio 257 GPIO_ACTIVE_HIGH>; diff --git a/dts/src/arm/mt7623n-bananapi-bpi-r2.dts b/dts/src/arm/mt7623n-bananapi-bpi-r2.dts index 027c1b0c6a..5008115d24 100644 --- a/dts/src/arm/mt7623n-bananapi-bpi-r2.dts +++ b/dts/src/arm/mt7623n-bananapi-bpi-r2.dts @@ -91,13 +91,13 @@ pinctrl-names = "default"; pinctrl-0 = <&key_pins_a>; - factory { + button-factory { label = "factory"; linux,code = <BTN_0>; gpios = <&pio 256 GPIO_ACTIVE_LOW>; }; - wps { + button-wps { label = "wps"; linux,code = <KEY_WPS_BUTTON>; gpios = <&pio 257 GPIO_ACTIVE_HIGH>; diff --git a/dts/src/arm/mt7623n-rfb-emmc.dts b/dts/src/arm/mt7623n-rfb-emmc.dts index 1b9b9a8145..bf67a8e9be 100644 --- a/dts/src/arm/mt7623n-rfb-emmc.dts +++ b/dts/src/arm/mt7623n-rfb-emmc.dts @@ -60,13 +60,13 @@ pinctrl-names = "default"; pinctrl-0 = <&key_pins_a>; - factory { + button-factory { label = "factory"; linux,code = <BTN_0>; gpios = <&pio 256 GPIO_ACTIVE_LOW>; }; - wps { + button-wps { label = "wps"; linux,code = <KEY_WPS_BUTTON>; gpios = <&pio 257 GPIO_ACTIVE_HIGH>; diff --git a/dts/src/arm/mt7629-rfb.dts b/dts/src/arm/mt7629-rfb.dts index eb536cbebd..84e14bee72 100644 --- a/dts/src/arm/mt7629-rfb.dts +++ b/dts/src/arm/mt7629-rfb.dts @@ -23,13 +23,13 @@ gpio-keys { compatible = "gpio-keys"; - reset { + button-reset { label = "factory"; linux,code = <KEY_RESTART>; gpios = <&pio 60 GPIO_ACTIVE_LOW>; }; - wps { + button-wps { label = "wps"; linux,code = <KEY_WPS_BUTTON>; gpios = <&pio 58 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/mxs-pinfunc.h b/dts/src/arm/mxs-pinfunc.h index c6da987b20..31297abcbc 100644 --- a/dts/src/arm/mxs-pinfunc.h +++ b/dts/src/arm/mxs-pinfunc.h @@ -1,14 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Header providing constants for i.MX28 pinctrl bindings. * * Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #ifndef __DT_BINDINGS_MXS_PINCTRL_H__ diff --git a/dts/src/arm/nuvoton-common-npcm7xx.dtsi b/dts/src/arm/nuvoton-common-npcm7xx.dtsi index 3696980a3d..c7b5ef15b7 100644 --- a/dts/src/arm/nuvoton-common-npcm7xx.dtsi +++ b/dts/src/arm/nuvoton-common-npcm7xx.dtsi @@ -110,6 +110,7 @@ compatible = "nuvoton,npcm750-reset"; reg = <0xf0801000 0x70>; #reset-cells = <2>; + nuvoton,sysgcr = <&gcr>; }; clk: clock-controller@f0801000 { @@ -128,7 +129,7 @@ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; ethernet = <0>; - clocks = <&clk_rg1refck>, <&clk NPCM7XX_CLK_AHB>; + clocks = <&clk_rg1refck>, <&clk NPCM7XX_CLK_AHB>; clock-names = "stmmaceth", "clk_gmac"; pinctrl-names = "default"; pinctrl-0 = <&rg1_pins diff --git a/dts/src/arm/nuvoton-npcm750.dtsi b/dts/src/arm/nuvoton-npcm750.dtsi index 13eee0fe56..30eed40b89 100644 --- a/dts/src/arm/nuvoton-npcm750.dtsi +++ b/dts/src/arm/nuvoton-npcm750.dtsi @@ -51,7 +51,7 @@ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; ethernet = <1>; - clocks = <&clk_rg2refck>, <&clk NPCM7XX_CLK_AHB>; + clocks = <&clk_rg2refck>, <&clk NPCM7XX_CLK_AHB>; clock-names = "stmmaceth", "clk_gmac"; pinctrl-names = "default"; pinctrl-0 = <&rg2_pins diff --git a/dts/src/arm/omap2.dtsi b/dts/src/arm/omap2.dtsi index 5750ca1233..afabb36a8a 100644 --- a/dts/src/arm/omap2.dtsi +++ b/dts/src/arm/omap2.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for OMAP2 SoC * * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/ - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/bus/ti-sysc.h> diff --git a/dts/src/arm/omap2420-h4.dts b/dts/src/arm/omap2420-h4.dts index af964f139a..5acf5dd87c 100644 --- a/dts/src/arm/omap2420-h4.dts +++ b/dts/src/arm/omap2420-h4.dts @@ -21,7 +21,7 @@ nor@0,0 { compatible = "cfi-flash"; - linux,mtd-name= "intel,ge28f256l18b85"; + linux,mtd-name = "intel,ge28f256l18b85"; #address-cells = <1>; #size-cells = <1>; reg = <0 0 0x04000000>; diff --git a/dts/src/arm/omap2420.dtsi b/dts/src/arm/omap2420.dtsi index bb529a2a29..821da51cb8 100644 --- a/dts/src/arm/omap2420.dtsi +++ b/dts/src/arm/omap2420.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for OMAP2420 SoC * * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include "omap2.dtsi" diff --git a/dts/src/arm/omap2430.dtsi b/dts/src/arm/omap2430.dtsi index 23115ba61b..b9a9e6e452 100644 --- a/dts/src/arm/omap2430.dtsi +++ b/dts/src/arm/omap2430.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for OMAP243x SoC * * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include "omap2.dtsi" diff --git a/dts/src/arm/omap3-cpu-thermal.dtsi b/dts/src/arm/omap3-cpu-thermal.dtsi index a9069cca58..0da759f8e2 100644 --- a/dts/src/arm/omap3-cpu-thermal.dtsi +++ b/dts/src/arm/omap3-cpu-thermal.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for OMAP3 SoC CPU thermal * * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/ - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/thermal/thermal.h> diff --git a/dts/src/arm/omap3-evm-37xx.dts b/dts/src/arm/omap3-evm-37xx.dts index c9332195d0..abd403c228 100644 --- a/dts/src/arm/omap3-evm-37xx.dts +++ b/dts/src/arm/omap3-evm-37xx.dts @@ -60,7 +60,7 @@ interrupt-parent = <&gpmc>; interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ <1 IRQ_TYPE_NONE>; /* termcount */ - linux,mtd-name= "hynix,h8kds0un0mer-4em"; + linux,mtd-name = "hynix,h8kds0un0mer-4em"; nand-bus-width = <16>; gpmc,device-width = <2>; ti,nand-ecc-opt = "bch8"; diff --git a/dts/src/arm/omap3-evm.dts b/dts/src/arm/omap3-evm.dts index 5cc0cf7cd1..f95eea63b3 100644 --- a/dts/src/arm/omap3-evm.dts +++ b/dts/src/arm/omap3-evm.dts @@ -60,7 +60,7 @@ interrupt-parent = <&gpmc>; interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ <1 IRQ_TYPE_NONE>; /* termcount */ - linux,mtd-name= "micron,mt29f2g16abdhc"; + linux,mtd-name = "micron,mt29f2g16abdhc"; nand-bus-width = <16>; gpmc,device-width = <2>; ti,nand-ecc-opt = "bch8"; diff --git a/dts/src/arm/omap3-gta04.dtsi b/dts/src/arm/omap3-gta04.dtsi index 0365f06165..28a6a9345b 100644 --- a/dts/src/arm/omap3-gta04.dtsi +++ b/dts/src/arm/omap3-gta04.dtsi @@ -127,7 +127,7 @@ spi-cpol; spi-cpha; - backlight= <&backlight>; + backlight = <&backlight>; label = "lcd"; port { lcd_in: endpoint { diff --git a/dts/src/arm/omap3-igep.dtsi b/dts/src/arm/omap3-igep.dtsi index 99f5585097..2192026104 100644 --- a/dts/src/arm/omap3-igep.dtsi +++ b/dts/src/arm/omap3-igep.dtsi @@ -111,7 +111,7 @@ interrupt-parent = <&gpmc>; interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ <1 IRQ_TYPE_NONE>; /* termcount */ - linux,mtd-name= "micron,mt29c4g96maz"; + linux,mtd-name = "micron,mt29c4g96maz"; nand-bus-width = <16>; gpmc,device-width = <2>; ti,nand-ecc-opt = "bch8"; diff --git a/dts/src/arm/omap3-ldp.dts b/dts/src/arm/omap3-ldp.dts index 9c6a927245..36fc8805e0 100644 --- a/dts/src/arm/omap3-ldp.dts +++ b/dts/src/arm/omap3-ldp.dts @@ -103,7 +103,7 @@ interrupt-parent = <&gpmc>; interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ <1 IRQ_TYPE_NONE>; /* termcount */ - linux,mtd-name= "micron,nand"; + linux,mtd-name = "micron,nand"; nand-bus-width = <16>; gpmc,device-width = <2>; ti,nand-ecc-opt = "bch8"; @@ -215,11 +215,11 @@ }; &mmc2 { - status="disabled"; + status = "disabled"; }; &mmc3 { - status="disabled"; + status = "disabled"; }; &omap3_pmx_core { diff --git a/dts/src/arm/omap3-lilly-a83x.dtsi b/dts/src/arm/omap3-lilly-a83x.dtsi index 73d477898e..c595afe418 100644 --- a/dts/src/arm/omap3-lilly-a83x.dtsi +++ b/dts/src/arm/omap3-lilly-a83x.dtsi @@ -372,7 +372,7 @@ gpmc,device-width = <2>; gpmc,wait-pin = <0>; gpmc,wait-monitoring-ns = <0>; - gpmc,burst-length= <4>; + gpmc,burst-length = <4>; gpmc,cs-on-ns = <0>; gpmc,cs-rd-off-ns = <100>; gpmc,cs-wr-off-ns = <100>; diff --git a/dts/src/arm/omap3-n900.dts b/dts/src/arm/omap3-n900.dts index d40c3d2c49..dd79715564 100644 --- a/dts/src/arm/omap3-n900.dts +++ b/dts/src/arm/omap3-n900.dts @@ -568,8 +568,8 @@ }; &twl_gpio { - ti,pullups = <0x0>; - ti,pulldowns = <0x03ff3f>; /* BIT(0..5) | BIT(8..17) */ + ti,pullups = <0x0>; + ti,pulldowns = <0x03ff3f>; /* BIT(0..5) | BIT(8..17) */ }; &i2c2 { diff --git a/dts/src/arm/omap3-n950-n9.dtsi b/dts/src/arm/omap3-n950-n9.dtsi index 7dde9fbb06..f68da828b0 100644 --- a/dts/src/arm/omap3-n950-n9.dtsi +++ b/dts/src/arm/omap3-n950-n9.dtsi @@ -162,8 +162,8 @@ }; &twl_gpio { - ti,pullups = <0x000001>; /* BIT(0) */ - ti,pulldowns = <0x008106>; /* BIT(1) | BIT(2) | BIT(8) | BIT(15) */ + ti,pullups = <0x000001>; /* BIT(0) */ + ti,pulldowns = <0x008106>; /* BIT(1) | BIT(2) | BIT(8) | BIT(15) */ }; &vdac { diff --git a/dts/src/arm/omap3-overo-base.dtsi b/dts/src/arm/omap3-overo-base.dtsi index 006a6d9723..adc714c398 100644 --- a/dts/src/arm/omap3-overo-base.dtsi +++ b/dts/src/arm/omap3-overo-base.dtsi @@ -222,7 +222,7 @@ nand@0,0 { compatible = "ti,omap2-nand"; - linux,mtd-name= "micron,mt29c4g96maz"; + linux,mtd-name = "micron,mt29c4g96maz"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ interrupt-parent = <&gpmc>; interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ diff --git a/dts/src/arm/omap3-pandora-common.dtsi b/dts/src/arm/omap3-pandora-common.dtsi index 37608af6c0..5598537644 100644 --- a/dts/src/arm/omap3-pandora-common.dtsi +++ b/dts/src/arm/omap3-pandora-common.dtsi @@ -666,7 +666,7 @@ lcd: lcd@1 { reg = <1>; /* CS1 */ - compatible = "tpo,td043mtea1"; + compatible = "tpo,td043mtea1"; spi-max-frequency = <100000>; spi-cpol; spi-cpha; diff --git a/dts/src/arm/omap3.dtsi b/dts/src/arm/omap3.dtsi index 64b7e6fddd..825075ff0e 100644 --- a/dts/src/arm/omap3.dtsi +++ b/dts/src/arm/omap3.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for OMAP3 SoC * * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/ - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/bus/ti-sysc.h> diff --git a/dts/src/arm/omap3430-sdp.dts b/dts/src/arm/omap3430-sdp.dts index 7d530ae348..258ecd9e45 100644 --- a/dts/src/arm/omap3430-sdp.dts +++ b/dts/src/arm/omap3430-sdp.dts @@ -53,7 +53,7 @@ nor@0,0 { compatible = "cfi-flash"; - linux,mtd-name= "intel,pf48f6000m0y1be"; + linux,mtd-name = "intel,pf48f6000m0y1be"; #address-cells = <1>; #size-cells = <1>; reg = <0 0 0x08000000>; @@ -105,7 +105,7 @@ interrupt-parent = <&gpmc>; interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ <1 IRQ_TYPE_NONE>; /* termcount */ - linux,mtd-name= "micron,mt29f1g08abb"; + linux,mtd-name = "micron,mt29f1g08abb"; #address-cells = <1>; #size-cells = <1>; ti,nand-ecc-opt = "sw"; @@ -148,7 +148,7 @@ }; onenand@2,0 { - linux,mtd-name= "samsung,kfm2g16q2m-deb8"; + linux,mtd-name = "samsung,kfm2g16q2m-deb8"; #address-cells = <1>; #size-cells = <1>; compatible = "ti,omap2-onenand"; diff --git a/dts/src/arm/omap34xx.dtsi b/dts/src/arm/omap34xx.dtsi index 8b84513997..2eb73ae7ef 100644 --- a/dts/src/arm/omap34xx.dtsi +++ b/dts/src/arm/omap34xx.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for OMAP34xx/OMAP35xx SoC * * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/bus/ti-sysc.h> diff --git a/dts/src/arm/omap36xx.dtsi b/dts/src/arm/omap36xx.dtsi index 22b33098b1..32ac7924a1 100644 --- a/dts/src/arm/omap36xx.dtsi +++ b/dts/src/arm/omap36xx.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for OMAP3 SoC * * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/bus/ti-sysc.h> diff --git a/dts/src/arm/omap4-cpu-thermal.dtsi b/dts/src/arm/omap4-cpu-thermal.dtsi index 03d054b2bf..4d7eeb133d 100644 --- a/dts/src/arm/omap4-cpu-thermal.dtsi +++ b/dts/src/arm/omap4-cpu-thermal.dtsi @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for OMAP4/5 SoC CPU thermal * * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ * Contact: Eduardo Valentin <eduardo.valentin@ti.com> - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/thermal/thermal.h> diff --git a/dts/src/arm/omap443x.dtsi b/dts/src/arm/omap443x.dtsi index 8466161197..238aceb799 100644 --- a/dts/src/arm/omap443x.dtsi +++ b/dts/src/arm/omap443x.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for OMAP443x SoC * * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include "omap4.dtsi" diff --git a/dts/src/arm/omap4460.dtsi b/dts/src/arm/omap4460.dtsi index 3d6db1db94..1b27a862ae 100644 --- a/dts/src/arm/omap4460.dtsi +++ b/dts/src/arm/omap4460.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for OMAP4460 SoC * * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include "omap4.dtsi" diff --git a/dts/src/arm/omap5-core-thermal.dtsi b/dts/src/arm/omap5-core-thermal.dtsi index 02e76338bf..e0d8e39a00 100644 --- a/dts/src/arm/omap5-core-thermal.dtsi +++ b/dts/src/arm/omap5-core-thermal.dtsi @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for OMAP543x SoC CORE thermal * * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ * Contact: Eduardo Valentin <eduardo.valentin@ti.com> - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/thermal/thermal.h> diff --git a/dts/src/arm/omap5-gpu-thermal.dtsi b/dts/src/arm/omap5-gpu-thermal.dtsi index bf8fa9372e..1b4b7d9136 100644 --- a/dts/src/arm/omap5-gpu-thermal.dtsi +++ b/dts/src/arm/omap5-gpu-thermal.dtsi @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Device Tree Source for OMAP543x SoC GPU thermal * * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ * Contact: Eduardo Valentin <eduardo.valentin@ti.com> - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/thermal/thermal.h> diff --git a/dts/src/arm/omap5-l4.dtsi b/dts/src/arm/omap5-l4.dtsi index 06cc3a19dd..3b505fe415 100644 --- a/dts/src/arm/omap5-l4.dtsi +++ b/dts/src/arm/omap5-l4.dtsi @@ -482,7 +482,7 @@ clocks = <&usb_phy_cm_clk32k>, <&sys_clkin>, <&l3init_clkctrl OMAP5_USB_OTG_SS_CLKCTRL 8>; - clock-names = "wkupclk", + clock-names = "wkupclk", "sysclk", "refclk"; #phy-cells = <0>; diff --git a/dts/src/arm/orion5x-lacie-d2-network.dts b/dts/src/arm/orion5x-lacie-d2-network.dts index 422958d13d..03471d30bf 100644 --- a/dts/src/arm/orion5x-lacie-d2-network.dts +++ b/dts/src/arm/orion5x-lacie-d2-network.dts @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. */ /dts-v1/; diff --git a/dts/src/arm/orion5x-lacie-ethernet-disk-mini-v2.dts b/dts/src/arm/orion5x-lacie-ethernet-disk-mini-v2.dts index 0043e00401..f17e25ac98 100644 --- a/dts/src/arm/orion5x-lacie-ethernet-disk-mini-v2.dts +++ b/dts/src/arm/orion5x-lacie-ethernet-disk-mini-v2.dts @@ -1,10 +1,5 @@ -/* - * Copyright (C) 2012 Thomas Petazzoni <thomas.petazzoni@free-electrons.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright (C) 2012 Thomas Petazzoni <thomas.petazzoni@free-electrons.com> /* * TODO: add Orion USB device port init when kernel.org support is added. diff --git a/dts/src/arm/orion5x-maxtor-shared-storage-2.dts b/dts/src/arm/orion5x-maxtor-shared-storage-2.dts index 0ca6208a26..d578599983 100644 --- a/dts/src/arm/orion5x-maxtor-shared-storage-2.dts +++ b/dts/src/arm/orion5x-maxtor-shared-storage-2.dts @@ -1,10 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * Copyright (C) Sylver Bruneau <sylver.bruneau@googlemail.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. */ /dts-v1/; diff --git a/dts/src/arm/orion5x-mv88f5181.dtsi b/dts/src/arm/orion5x-mv88f5181.dtsi index f667012b26..819f9efb70 100644 --- a/dts/src/arm/orion5x-mv88f5181.dtsi +++ b/dts/src/arm/orion5x-mv88f5181.dtsi @@ -1,10 +1,5 @@ -/* - * Copyright (C) 2016 Jamie Lentin <jm@lentin.co.uk> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright (C) 2016 Jamie Lentin <jm@lentin.co.uk> #include "orion5x.dtsi" diff --git a/dts/src/arm/orion5x-mv88f5182.dtsi b/dts/src/arm/orion5x-mv88f5182.dtsi index d1ed71c602..86b87fb26d 100644 --- a/dts/src/arm/orion5x-mv88f5182.dtsi +++ b/dts/src/arm/orion5x-mv88f5182.dtsi @@ -1,10 +1,5 @@ -/* - * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com> #include "orion5x.dtsi" diff --git a/dts/src/arm/orion5x-netgear-wnr854t.dts b/dts/src/arm/orion5x-netgear-wnr854t.dts index ea081afa46..4f4888ec91 100644 --- a/dts/src/arm/orion5x-netgear-wnr854t.dts +++ b/dts/src/arm/orion5x-netgear-wnr854t.dts @@ -1,10 +1,5 @@ -/* - * Copyright (C) 2016 Jamie Lentin <jm@lentin.co.uk> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright (C) 2016 Jamie Lentin <jm@lentin.co.uk> /dts-v1/; diff --git a/dts/src/arm/orion5x-rd88f5182-nas.dts b/dts/src/arm/orion5x-rd88f5182-nas.dts index 487324f7c5..fd78aa02a3 100644 --- a/dts/src/arm/orion5x-rd88f5182-nas.dts +++ b/dts/src/arm/orion5x-rd88f5182-nas.dts @@ -1,10 +1,5 @@ -/* - * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com> /dts-v1/; diff --git a/dts/src/arm/orion5x.dtsi b/dts/src/arm/orion5x.dtsi index 61e631b3fd..2d41f5c166 100644 --- a/dts/src/arm/orion5x.dtsi +++ b/dts/src/arm/orion5x.dtsi @@ -1,10 +1,5 @@ -/* - * Copyright (C) 2012 Thomas Petazzoni <thomas.petazzoni@free-electrons.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright (C) 2012 Thomas Petazzoni <thomas.petazzoni@free-electrons.com> #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) diff --git a/dts/src/arm/pxa300-raumfeld-common.dtsi b/dts/src/arm/pxa300-raumfeld-common.dtsi index 8a6721d436..147c99191d 100644 --- a/dts/src/arm/pxa300-raumfeld-common.dtsi +++ b/dts/src/arm/pxa300-raumfeld-common.dtsi @@ -189,31 +189,31 @@ regulators { regulator-v3 { - regulator-compatible= "V3(DCDC)"; + regulator-compatible = "V3(DCDC)"; regulator-min-microvolt = <725000>; regulator-max-microvolt = <1800000>; }; regulator-v4 { - regulator-compatible= "V4(DCDC)"; + regulator-compatible = "V4(DCDC)"; regulator-min-microvolt = <725000>; regulator-max-microvolt = <1800000>; }; regulator-v5 { - regulator-compatible= "V5(LDO)"; + regulator-compatible = "V5(LDO)"; regulator-min-microvolt = <1700000>; regulator-max-microvolt = <2000000>; }; reg_vcc_sdio: regulator-v6 { - regulator-compatible= "V6(LDO)"; + regulator-compatible = "V6(LDO)"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; regulator-v7 { - regulator-compatible= "V7(LDO)"; + regulator-compatible = "V7(LDO)"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; }; diff --git a/dts/src/arm/qcom-apq8060-dragonboard.dts b/dts/src/arm/qcom-apq8060-dragonboard.dts index 138d6478ac..70a1dd629c 100644 --- a/dts/src/arm/qcom-apq8060-dragonboard.dts +++ b/dts/src/arm/qcom-apq8060-dragonboard.dts @@ -1,6 +1,7 @@ // SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/pinctrl/qcom,pmic-mpp.h> #include "qcom-msm8660.dtsi" @@ -273,7 +274,7 @@ }; gpio@150 { - dragon_ethernet_gpios: ethernet-gpios { + dragon_ethernet_gpios: ethernet-state { pinconf { pins = "gpio7"; function = "normal"; @@ -282,7 +283,7 @@ power-source = <PM8058_GPIO_S3>; }; }; - dragon_bmp085_gpios: bmp085-gpios { + dragon_bmp085_gpios: bmp085-state { pinconf { pins = "gpio16"; function = "normal"; @@ -291,7 +292,7 @@ power-source = <PM8058_GPIO_S3>; }; }; - dragon_mpu3050_gpios: mpu3050-gpios { + dragon_mpu3050_gpios: mpu3050-state { pinconf { pins = "gpio17"; function = "normal"; @@ -300,7 +301,7 @@ power-source = <PM8058_GPIO_S3>; }; }; - dragon_sdcc3_gpios: sdcc3-gpios { + dragon_sdcc3_gpios: sdcc3-state { pinconf { pins = "gpio22"; function = "normal"; @@ -309,7 +310,7 @@ power-source = <PM8058_GPIO_S3>; }; }; - dragon_sdcc5_gpios: sdcc5-gpios { + dragon_sdcc5_gpios: sdcc5-state { pinconf { pins = "gpio26"; function = "normal"; @@ -319,7 +320,7 @@ power-source = <PM8058_GPIO_S3>; }; }; - dragon_ak8975_gpios: ak8975-gpios { + dragon_ak8975_gpios: ak8975-state { pinconf { pins = "gpio33"; function = "normal"; @@ -328,9 +329,9 @@ power-source = <PM8058_GPIO_S3>; }; }; - dragon_cm3605_gpios: cm3605-gpios { + dragon_cm3605_gpios: cm3605-state { /* Pin 34 connected to the proxy IRQ */ - pinconf_gpio34 { + gpio34-pins { pins = "gpio34"; function = "normal"; input-enable; @@ -338,7 +339,7 @@ power-source = <PM8058_GPIO_S3>; }; /* Pin 35 connected to ASET */ - pinconf_gpio35 { + gpio35-pins { pins = "gpio35"; function = "normal"; output-high; @@ -346,7 +347,7 @@ power-source = <PM8058_GPIO_S3>; }; }; - dragon_veth_gpios: veth-gpios { + dragon_veth_gpios: veth-state { pinconf { pins = "gpio40"; function = "normal"; @@ -416,6 +417,7 @@ compatible = "qcom,pm8058-led"; reg = <0x131>; label = "pm8058:red"; + color = <LED_COLOR_ID_RED>; default-state = "off"; }; led@132 { @@ -426,6 +428,7 @@ compatible = "qcom,pm8058-led"; reg = <0x132>; label = "pm8058:yellow"; + color = <LED_COLOR_ID_YELLOW>; default-state = "off"; linux,default-trigger = "mmc0"; }; @@ -433,6 +436,8 @@ compatible = "qcom,pm8058-led"; reg = <0x133>; label = "pm8058:green"; + function = LED_FUNCTION_HEARTBEAT; + color = <LED_COLOR_ID_GREEN>; default-state = "on"; linux,default-trigger = "heartbeat"; }; diff --git a/dts/src/arm/qcom-apq8064-asus-nexus7-flo.dts b/dts/src/arm/qcom-apq8064-asus-nexus7-flo.dts index ca9f735281..fee278e32c 100644 --- a/dts/src/arm/qcom-apq8064-asus-nexus7-flo.dts +++ b/dts/src/arm/qcom-apq8064-asus-nexus7-flo.dts @@ -24,9 +24,9 @@ ramoops@88d00000{ compatible = "ramoops"; reg = <0x88d00000 0x100000>; - record-size = <0x00020000>; - console-size = <0x00020000>; - ftrace-size = <0x00020000>; + record-size = <0x00020000>; + console-size = <0x00020000>; + ftrace-size = <0x00020000>; }; }; @@ -44,12 +44,12 @@ gpio-keys { compatible = "gpio-keys"; - volume_up { + key-volume-up { label = "Volume Up"; gpios = <&pm8921_gpio 4 GPIO_ACTIVE_HIGH>; linux,code = <KEY_VOLUMEUP>; }; - volume_down { + key-volume-down { label = "Volume Down"; gpios = <&pm8921_gpio 38 GPIO_ACTIVE_HIGH>; linux,code = <KEY_VOLUMEDOWN>; @@ -98,8 +98,8 @@ * tabla2x-slim-VDDIO_CDC */ s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; qcom,switch-mode-frequency = <3200000>; regulator-always-on; }; @@ -341,17 +341,17 @@ }; }; - imem@2a03f000 { - compatible = "syscon", "simple-mfd"; + sram@2a03f000 { + compatible = "qcom,apq8064-imem", "syscon", "simple-mfd"; reg = <0x2a03f000 0x1000>; reboot-mode { compatible = "syscon-reboot-mode"; offset = <0x65c>; - mode-normal = <0x77665501>; - mode-bootloader = <0x77665500>; - mode-recovery = <0x77665502>; + mode-normal = <0x77665501>; + mode-bootloader = <0x77665500>; + mode-recovery = <0x77665502>; }; }; }; diff --git a/dts/src/arm/qcom-apq8064-cm-qs600.dts b/dts/src/arm/qcom-apq8064-cm-qs600.dts index e068a8d0ad..e3bf57cd74 100644 --- a/dts/src/arm/qcom-apq8064-cm-qs600.dts +++ b/dts/src/arm/qcom-apq8064-cm-qs600.dts @@ -82,8 +82,8 @@ }; s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; qcom,switch-mode-frequency = <3200000>; }; @@ -196,8 +196,8 @@ qcom,ssbi@500000 { pmic@0 { gpio@150 { - wlan_default_gpios: wlan-gpios { - pios { + wlan_default_gpios: wlan-gpios-state { + pinconf { pins = "gpio43"; function = "normal"; bias-disable; @@ -230,9 +230,9 @@ sdcc3: mmc@12180000 { status = "okay"; vmmc-supply = <&v3p3_fixed>; - pinctrl-names = "default"; - pinctrl-0 = <&card_detect>; - cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&card_detect>; + cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; }; /* WLAN */ sdcc4: mmc@121c0000 { diff --git a/dts/src/arm/qcom-apq8064-ifc6410.dts b/dts/src/arm/qcom-apq8064-ifc6410.dts index 2638b380be..0322cb88d4 100644 --- a/dts/src/arm/qcom-apq8064-ifc6410.dts +++ b/dts/src/arm/qcom-apq8064-ifc6410.dts @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 #include "qcom-apq8064-v2.0.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> / { @@ -39,6 +40,7 @@ led@1 { label = "apq8064:green:user1"; + color = <LED_COLOR_ID_GREEN>; gpios = <&pm8921_gpio 18 GPIO_ACTIVE_HIGH>; default-state = "on"; }; @@ -108,8 +110,8 @@ }; s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; qcom,switch-mode-frequency = <3200000>; }; @@ -240,8 +242,8 @@ }; sata0: sata@29000000 { - status = "okay"; - target-supply = <&pm8921_s4>; + status = "okay"; + target-supply = <&pm8921_s4>; }; /* OTG */ @@ -291,8 +293,8 @@ qcom,ssbi@500000 { pmic@0 { gpio@150 { - wlan_default_gpios: wlan-gpios { - pios { + wlan_default_gpios: wlan-gpios-state { + pinconf { pins = "gpio43"; function = "normal"; bias-disable; @@ -300,8 +302,8 @@ }; }; - notify_led: nled { - pios { + notify_led: nled-state { + pinconf { pins = "gpio18"; function = "normal"; bias-disable; @@ -324,9 +326,9 @@ sdcc3: mmc@12180000 { status = "okay"; vmmc-supply = <&pm8921_l6>; - pinctrl-names = "default"; - pinctrl-0 = <&card_detect>; - cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&card_detect>; + cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; }; /* WLAN */ sdcc4: mmc@121c0000 { @@ -341,7 +343,6 @@ status = "okay"; core-vdda-supply = <&pm8921_hdmi_switch>; - hdmi-mux-supply = <&ext_3p3v>; hpd-gpios = <&tlmm_pinmux 72 GPIO_ACTIVE_HIGH>; diff --git a/dts/src/arm/qcom-apq8064-sony-xperia-lagan-yuga.dts b/dts/src/arm/qcom-apq8064-sony-xperia-lagan-yuga.dts index 0cee62c7b8..c07c547475 100644 --- a/dts/src/arm/qcom-apq8064-sony-xperia-lagan-yuga.dts +++ b/dts/src/arm/qcom-apq8064-sony-xperia-lagan-yuga.dts @@ -23,28 +23,28 @@ pinctrl-names = "default"; pinctrl-0 = <&gpio_keys_pin_a>; - camera-focus { + key-camera-focus { label = "camera_focus"; gpios = <&pm8921_gpio 3 GPIO_ACTIVE_LOW>; linux,input-type = <1>; linux,code = <KEY_CAMERA_FOCUS>; }; - camera-snapshot { + key-camera-snapshot { label = "camera_snapshot"; gpios = <&pm8921_gpio 4 GPIO_ACTIVE_LOW>; linux,input-type = <1>; linux,code = <KEY_CAMERA>; }; - volume-down { + key-volume-down { label = "volume_down"; gpios = <&pm8921_gpio 29 GPIO_ACTIVE_LOW>; linux,input-type = <1>; linux,code = <KEY_VOLUMEDOWN>; }; - volume-up { + key-volume-up { label = "volume_up"; gpios = <&pm8921_gpio 35 GPIO_ACTIVE_LOW>; linux,input-type = <1>; @@ -334,7 +334,7 @@ qcom,ssbi@500000 { pmic@0 { gpio@150 { - gpio_keys_pin_a: gpio-keys-pin-active { + gpio_keys_pin_a: gpio-keys-active-state { pins = "gpio3", "gpio4", "gpio29", "gpio35"; function = "normal"; diff --git a/dts/src/arm/qcom-apq8064.dtsi b/dts/src/arm/qcom-apq8064.dtsi index 34c0ba7fa3..ada4c828bf 100644 --- a/dts/src/arm/qcom-apq8064.dtsi +++ b/dts/src/arm/qcom-apq8064.dtsi @@ -105,7 +105,7 @@ polling-delay-passive = <250>; polling-delay = <1000>; - thermal-sensors = <&gcc 7>; + thermal-sensors = <&tsens 7>; coefficients = <1199 0>; trips { @@ -126,7 +126,7 @@ polling-delay-passive = <250>; polling-delay = <1000>; - thermal-sensors = <&gcc 8>; + thermal-sensors = <&tsens 8>; coefficients = <1132 0>; trips { @@ -147,7 +147,7 @@ polling-delay-passive = <250>; polling-delay = <1000>; - thermal-sensors = <&gcc 9>; + thermal-sensors = <&tsens 9>; coefficients = <1199 0>; trips { @@ -168,7 +168,7 @@ polling-delay-passive = <250>; polling-delay = <1000>; - thermal-sensors = <&gcc 10>; + thermal-sensors = <&tsens 10>; coefficients = <1132 0>; trips { @@ -315,7 +315,7 @@ firmware { scm { - compatible = "qcom,scm-apq8064"; + compatible = "qcom,scm-apq8064", "qcom,scm"; clocks = <&rpmcc RPM_DAYTONA_FABRIC_CLK>; clock-names = "core"; @@ -430,8 +430,8 @@ }; sps_sic_non_secure: sps-sic-non-secure@12100000 { - compatible = "syscon"; - reg = <0x12100000 0x10000>; + compatible = "syscon"; + reg = <0x12100000 0x10000>; }; gsbi1: gsbi@12440000 { @@ -796,28 +796,37 @@ }; qfprom: qfprom@700000 { - compatible = "qcom,qfprom"; - reg = <0x00700000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; + compatible = "qcom,apq8064-qfprom", "qcom,qfprom"; + reg = <0x00700000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; ranges; - tsens_calib: calib { + tsens_calib: calib@404 { reg = <0x404 0x10>; }; - tsens_backup: backup_calib { + tsens_backup: backup_calib@414 { reg = <0x414 0x10>; }; }; gcc: clock-controller@900000 { - compatible = "qcom,gcc-apq8064"; + compatible = "qcom,gcc-apq8064", "syscon"; reg = <0x00900000 0x4000>; - nvmem-cells = <&tsens_calib>, <&tsens_backup>; - nvmem-cell-names = "calib", "calib_backup"; #clock-cells = <1>; #power-domain-cells = <1>; #reset-cells = <1>; - #thermal-sensor-cells = <1>; + + tsens: thermal-sensor { + compatible = "qcom,msm8960-tsens"; + + nvmem-cells = <&tsens_calib>, <&tsens_backup>; + nvmem-cell-names = "calib", "calib_backup"; + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; + + #qcom,sensors = <11>; + #thermal-sensor-cells = <1>; + }; }; lcc: clock-controller@28000000 { @@ -836,23 +845,25 @@ }; l2cc: clock-controller@2011000 { - compatible = "qcom,kpss-gcc", "syscon"; - reg = <0x2011000 0x1000>; + compatible = "qcom,kpss-gcc", "syscon"; + reg = <0x2011000 0x1000>; }; rpm@108000 { - compatible = "qcom,rpm-apq8064"; - reg = <0x108000 0x1000>; - qcom,ipc = <&l2cc 0x8 2>; + compatible = "qcom,rpm-apq8064"; + reg = <0x108000 0x1000>; + qcom,ipc = <&l2cc 0x8 2>; - interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "ack", "err", "wakeup"; + interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ack", "err", "wakeup"; rpmcc: clock-controller { - compatible = "qcom,rpmcc-apq8064", "qcom,rpmcc"; + compatible = "qcom,rpmcc-apq8064", "qcom,rpmcc"; #clock-cells = <1>; + clocks = <&pxo_board>, <&cxo_board>; + clock-names = "pxo", "cxo"; }; regulators { @@ -1004,39 +1015,39 @@ }; sata_phy0: phy@1b400000 { - compatible = "qcom,apq8064-sata-phy"; - status = "disabled"; - reg = <0x1b400000 0x200>; - reg-names = "phy_mem"; - clocks = <&gcc SATA_PHY_CFG_CLK>; - clock-names = "cfg"; - #phy-cells = <0>; + compatible = "qcom,apq8064-sata-phy"; + status = "disabled"; + reg = <0x1b400000 0x200>; + reg-names = "phy_mem"; + clocks = <&gcc SATA_PHY_CFG_CLK>; + clock-names = "cfg"; + #phy-cells = <0>; }; sata0: sata@29000000 { - compatible = "qcom,apq8064-ahci", "generic-ahci"; - status = "disabled"; - reg = <0x29000000 0x180>; - interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; - - clocks = <&gcc SFAB_SATA_S_H_CLK>, - <&gcc SATA_H_CLK>, - <&gcc SATA_A_CLK>, - <&gcc SATA_RXOOB_CLK>, - <&gcc SATA_PMALIVE_CLK>; - clock-names = "slave_iface", - "iface", - "bus", - "rxoob", - "core_pmalive"; - - assigned-clocks = <&gcc SATA_RXOOB_CLK>, - <&gcc SATA_PMALIVE_CLK>; - assigned-clock-rates = <100000000>, <100000000>; - - phys = <&sata_phy0>; - phy-names = "sata-phy"; - ports-implemented = <0x1>; + compatible = "qcom,apq8064-ahci", "generic-ahci"; + status = "disabled"; + reg = <0x29000000 0x180>; + interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc SFAB_SATA_S_H_CLK>, + <&gcc SATA_H_CLK>, + <&gcc SATA_A_CLK>, + <&gcc SATA_RXOOB_CLK>, + <&gcc SATA_PMALIVE_CLK>; + clock-names = "slave_iface", + "iface", + "bus", + "rxoob", + "core_pmalive"; + + assigned-clocks = <&gcc SATA_RXOOB_CLK>, + <&gcc SATA_PMALIVE_CLK>; + assigned-clock-rates = <100000000>, <100000000>; + + phys = <&sata_phy0>; + phy-names = "sata-phy"; + ports-implemented = <0x1>; }; /* Temporary fixed regulator */ @@ -1076,18 +1087,18 @@ #size-cells = <1>; ranges; sdcc1: mmc@12400000 { - status = "disabled"; - compatible = "arm,pl18x", "arm,primecell"; - pinctrl-names = "default"; - pinctrl-0 = <&sdcc1_pins>; + status = "disabled"; + compatible = "arm,pl18x", "arm,primecell"; + pinctrl-names = "default"; + pinctrl-0 = <&sdcc1_pins>; arm,primecell-periphid = <0x00051180>; - reg = <0x12400000 0x2000>; - interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "cmd_irq"; - clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; - clock-names = "mclk", "apb_pclk"; - bus-width = <8>; - max-frequency = <96000000>; + reg = <0x12400000 0x2000>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + max-frequency = <96000000>; non-removable; cap-sd-highspeed; cap-mmc-highspeed; @@ -1096,36 +1107,36 @@ }; sdcc3: mmc@12180000 { - compatible = "arm,pl18x", "arm,primecell"; + compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; - status = "disabled"; - reg = <0x12180000 0x2000>; - interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "cmd_irq"; - clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; - clock-names = "mclk", "apb_pclk"; - bus-width = <4>; + status = "disabled"; + reg = <0x12180000 0x2000>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <4>; cap-sd-highspeed; cap-mmc-highspeed; - max-frequency = <192000000>; + max-frequency = <192000000>; no-1-8-v; dmas = <&sdcc3bam 2>, <&sdcc3bam 1>; dma-names = "tx", "rx"; }; sdcc4: mmc@121c0000 { - compatible = "arm,pl18x", "arm,primecell"; + compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; - status = "disabled"; - reg = <0x121c0000 0x2000>; - interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "cmd_irq"; - clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>; - clock-names = "mclk", "apb_pclk"; - bus-width = <4>; + status = "disabled"; + reg = <0x121c0000 0x2000>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <4>; cap-sd-highspeed; cap-mmc-highspeed; - max-frequency = <48000000>; + max-frequency = <48000000>; dmas = <&sdcc4bam 2>, <&sdcc4bam 1>; dma-names = "tx", "rx"; pinctrl-names = "default"; @@ -1271,6 +1282,8 @@ syscon-sfpb = <&mmss_sfpb>; phys = <&dsi0_phy>; phy-names = "dsi"; + status = "disabled"; + ports { #address-cells = <1>; #size-cells = <0>; @@ -1299,9 +1312,10 @@ <0x04700300 0x200>, <0x04700500 0x5c>; reg-names = "dsi_pll", "dsi_phy", "dsi_phy_regulator"; - clock-names = "iface_clk", "ref"; + clock-names = "iface", "ref"; clocks = <&mmcc DSI_M_AHB_CLK>, <&pxo_board>; + status = "disabled"; }; @@ -1420,7 +1434,6 @@ "slave_iface"; phys = <&hdmi_phy>; - phy-names = "hdmi-phy"; ports { #address-cells = <1>; diff --git a/dts/src/arm/qcom-apq8084.dtsi b/dts/src/arm/qcom-apq8084.dtsi index da50a1a019..72f9255855 100644 --- a/dts/src/arm/qcom-apq8084.dtsi +++ b/dts/src/arm/qcom-apq8084.dtsi @@ -95,7 +95,7 @@ firmware { scm { - compatible = "qcom,scm"; + compatible = "qcom,scm-apq8084", "qcom,scm"; clocks = <&gcc GCC_CE1_CLK> , <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>; clock-names = "core", "bus", "iface"; }; @@ -240,10 +240,10 @@ }; qfprom: qfprom@fc4bc000 { + compatible = "qcom,apq8084-qfprom", "qcom,qfprom"; + reg = <0xfc4bc000 0x1000>; #address-cells = <1>; #size-cells = <1>; - compatible = "qcom,qfprom"; - reg = <0xfc4bc000 0x1000>; tsens_calib: calib@d0 { reg = <0xd0 0x18>; }; @@ -419,7 +419,7 @@ status = "disabled"; }; - sdhci@f9824900 { + mmc@f9824900 { compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; reg-names = "hc_mem", "core_mem"; @@ -432,7 +432,7 @@ status = "disabled"; }; - sdhci@f98a4900 { + mmc@f98a4900 { compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; reg-names = "hc_mem", "core_mem"; diff --git a/dts/src/arm/qcom-ipq4018-ap120c-ac-bit.dts b/dts/src/arm/qcom-ipq4018-ap120c-ac-bit.dts index 028ac8e247..cf7da1ab17 100644 --- a/dts/src/arm/qcom-ipq4018-ap120c-ac-bit.dts +++ b/dts/src/arm/qcom-ipq4018-ap120c-ac-bit.dts @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-or-later OR MIT +#include <dt-bindings/leds/common.h> #include "qcom-ipq4018-ap120c-ac.dtsi" / { @@ -10,17 +11,22 @@ power { label = "ap120c-ac:green:power"; + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_GREEN>; gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; default-state = "on"; }; wlan { label = "ap120c-ac:green:wlan"; + function = LED_FUNCTION_WLAN; + color = <LED_COLOR_ID_GREEN>; gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; }; support { label = "ap120c-ac:green:support"; + color = <LED_COLOR_ID_GREEN>; gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; panic-indicator; }; diff --git a/dts/src/arm/qcom-ipq4018-ap120c-ac.dts b/dts/src/arm/qcom-ipq4018-ap120c-ac.dts index b7916fc26d..c4f89b712f 100644 --- a/dts/src/arm/qcom-ipq4018-ap120c-ac.dts +++ b/dts/src/arm/qcom-ipq4018-ap120c-ac.dts @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-or-later OR MIT +#include <dt-bindings/leds/common.h> #include "qcom-ipq4018-ap120c-ac.dtsi" / { @@ -8,18 +9,24 @@ status: status { label = "ap120c-ac:blue:status"; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_BLUE>; gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; default-state = "keep"; }; wlan2g { label = "ap120c-ac:green:wlan2g"; + function = LED_FUNCTION_WLAN; + color = <LED_COLOR_ID_GREEN>; gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy0tpt"; }; wlan5g { label = "ap120c-ac:red:wlan5g"; + function = LED_FUNCTION_WLAN; + color = <LED_COLOR_ID_RED>; gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy1tpt"; }; diff --git a/dts/src/arm/qcom-ipq4018-ap120c-ac.dtsi b/dts/src/arm/qcom-ipq4018-ap120c-ac.dtsi index 1f3b1ce821..af9a26fb5d 100644 --- a/dts/src/arm/qcom-ipq4018-ap120c-ac.dtsi +++ b/dts/src/arm/qcom-ipq4018-ap120c-ac.dtsi @@ -11,7 +11,7 @@ keys { compatible = "gpio-keys"; - reset { + key-reset { label = "reset"; gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; linux,code = <KEY_RESTART>; diff --git a/dts/src/arm/qcom-ipq4019-ap.dk04.1.dtsi b/dts/src/arm/qcom-ipq4019-ap.dk04.1.dtsi index faeaa6bf0d..44a9597d8b 100644 --- a/dts/src/arm/qcom-ipq4019-ap.dk04.1.dtsi +++ b/dts/src/arm/qcom-ipq4019-ap.dk04.1.dtsi @@ -93,7 +93,7 @@ #address-cells = <1>; #size-cells = <1>; reg = <0>; - compatible = "n25q128a11"; + compatible = "micron,n25q128a11", "jedec,spi-nor"; spi-max-frequency = <24000000>; }; }; diff --git a/dts/src/arm/qcom-ipq4019-ap.dk07.1-c1.dts b/dts/src/arm/qcom-ipq4019-ap.dk07.1-c1.dts index d596dd1180..c7a6e77da2 100644 --- a/dts/src/arm/qcom-ipq4019-ap.dk07.1-c1.dts +++ b/dts/src/arm/qcom-ipq4019-ap.dk07.1-c1.dts @@ -56,7 +56,7 @@ #address-cells = <1>; #size-cells = <1>; reg = <0>; - compatible = "n25q128a11"; + compatible = "micron,n25q128a11", "jedec,spi-nor"; spi-max-frequency = <24000000>; }; }; diff --git a/dts/src/arm/qcom-ipq4019.dtsi b/dts/src/arm/qcom-ipq4019.dtsi index c5da723f76..bb307b8f67 100644 --- a/dts/src/arm/qcom-ipq4019.dtsi +++ b/dts/src/arm/qcom-ipq4019.dtsi @@ -156,7 +156,7 @@ firmware { scm { - compatible = "qcom,scm-ipq4019"; + compatible = "qcom,scm-ipq4019", "qcom,scm"; }; }; @@ -221,7 +221,7 @@ status = "disabled"; }; - sdhci: sdhci@7824900 { + sdhci: mmc@7824900 { compatible = "qcom,sdhci-msm-v4"; reg = <0x7824900 0x11c>, <0x7824000 0x800>; interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; diff --git a/dts/src/arm/qcom-ipq8064-ap148.dts b/dts/src/arm/qcom-ipq8064-ap148.dts index b63d01d101..a654d3c22c 100644 --- a/dts/src/arm/qcom-ipq8064-ap148.dts +++ b/dts/src/arm/qcom-ipq8064-ap148.dts @@ -7,12 +7,6 @@ soc { pinmux@800000 { - i2c4_pins: i2c4_pinmux { - pins = "gpio12", "gpio13"; - function = "gsbi4"; - bias-disable; - }; - buttons_pins: buttons_pins { mux { pins = "gpio54", "gpio65"; diff --git a/dts/src/arm/qcom-ipq8064-rb3011.dts b/dts/src/arm/qcom-ipq8064-rb3011.dts index 596d129d4a..5a65cce250 100644 --- a/dts/src/arm/qcom-ipq8064-rb3011.dts +++ b/dts/src/arm/qcom-ipq8064-rb3011.dts @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 #include "qcom-ipq8064.dtsi" #include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> / { model = "MikroTik RB3011UiAS-RM"; @@ -187,12 +188,12 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; pinctrl-0 = <&buttons_pins>; pinctrl-names = "default"; - button@1 { + button { label = "reset"; linux,code = <KEY_RESTART>; gpios = <&qcom_pinmux 66 GPIO_ACTIVE_LOW>; @@ -208,6 +209,7 @@ led@7 { label = "rb3011:green:user"; + color = <LED_COLOR_ID_GREEN>; gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>; default-state = "off"; }; @@ -305,15 +307,6 @@ }; }; - mdio0_pins: mdio0_pins { - mux { - pins = "gpio0", "gpio1"; - function = "gpio"; - drive-strength = <8>; - bias-disable; - }; - }; - mdio1_pins: mdio1_pins { mux { pins = "gpio10", "gpio11"; diff --git a/dts/src/arm/qcom-ipq8064-smb208.dtsi b/dts/src/arm/qcom-ipq8064-smb208.dtsi new file mode 100644 index 0000000000..ac9c44f0c1 --- /dev/null +++ b/dts/src/arm/qcom-ipq8064-smb208.dtsi @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include "qcom-ipq8064.dtsi" + +&rpm { + smb208_regulators: regulators { + compatible = "qcom,rpm-smb208-regulators"; + + smb208_s1a: s1a { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1150000>; + + qcom,switch-mode-frequency = <1200000>; + }; + + smb208_s1b: s1b { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1150000>; + + qcom,switch-mode-frequency = <1200000>; + }; + + smb208_s2a: s2a { + regulator-min-microvolt = < 800000>; + regulator-max-microvolt = <1250000>; + + qcom,switch-mode-frequency = <1200000>; + }; + + smb208_s2b: s2b { + regulator-min-microvolt = < 800000>; + regulator-max-microvolt = <1250000>; + + qcom,switch-mode-frequency = <1200000>; + }; + }; +}; diff --git a/dts/src/arm/qcom-ipq8064-v1.0.dtsi b/dts/src/arm/qcom-ipq8064-v1.0.dtsi index 5c802b99e1..411c8d63c3 100644 --- a/dts/src/arm/qcom-ipq8064-v1.0.dtsi +++ b/dts/src/arm/qcom-ipq8064-v1.0.dtsi @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 #include "qcom-ipq8064.dtsi" #include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> / { model = "Qualcomm Technologies, Inc. IPQ8064-v1.0"; @@ -65,19 +66,19 @@ status = "okay"; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; pinctrl-0 = <&buttons_pins>; pinctrl-names = "default"; - button@1 { + button-1 { label = "reset"; linux,code = <KEY_RESTART>; gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; linux,input-type = <1>; debounce-interval = <60>; }; - button@2 { + button-2 { label = "wps"; linux,code = <KEY_WPS_BUTTON>; gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; @@ -107,6 +108,7 @@ led@9 { label = "status_led_fail"; + function = LED_FUNCTION_STATUS; gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; default-state = "off"; }; @@ -119,6 +121,7 @@ led@53 { label = "status_led_pass"; + function = LED_FUNCTION_STATUS; gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; default-state = "off"; }; diff --git a/dts/src/arm/qcom-ipq8064.dtsi b/dts/src/arm/qcom-ipq8064.dtsi index 808ea18622..c8337c870b 100644 --- a/dts/src/arm/qcom-ipq8064.dtsi +++ b/dts/src/arm/qcom-ipq8064.dtsi @@ -292,8 +292,11 @@ }; smem: smem@41000000 { + compatible = "qcom,smem"; reg = <0x41000000 0x200000>; no-map; + + hwlocks = <&sfpb_mutex 3>; }; }; @@ -382,6 +385,13 @@ }; }; + i2c4_pins: i2c4-default { + pins = "gpio12", "gpio13"; + function = "gsbi4"; + drive-strength = <12>; + bias-disable; + }; + spi_pins: spi_pins { mux { pins = "gpio18", "gpio19", "gpio21"; @@ -424,6 +434,8 @@ pullups { pins = "gpio39"; + function = "nand"; + drive-strength = <10>; bias-pull-up; }; @@ -431,9 +443,32 @@ pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44", "gpio45", "gpio46", "gpio47"; + function = "nand"; + drive-strength = <10>; bias-bus-hold; }; }; + + mdio0_pins: mdio0-pins { + mux { + pins = "gpio0", "gpio1"; + function = "mdio"; + drive-strength = <8>; + bias-disable; + }; + }; + + rgmii2_pins: rgmii2-pins { + mux { + pins = "gpio27", "gpio28", "gpio29", + "gpio30", "gpio31", "gpio32", + "gpio51", "gpio52", "gpio59", + "gpio60", "gpio61", "gpio62"; + function = "rgmii2"; + drive-strength = <8>; + bias-disable; + }; + }; }; intc: interrupt-controller@2000000 { @@ -507,6 +542,44 @@ regulator; }; + gsbi1: gsbi@12440000 { + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x12440000 0x100>; + cell-index = <1>; + clocks = <&gcc GSBI1_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + syscon-tcsr = <&tcsr>; + + status = "disabled"; + + gsbi1_serial: serial@12450000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x12450000 0x100>, + <0x12400000 0x03>; + interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>; + clock-names = "core", "iface"; + + status = "disabled"; + }; + + gsbi1_i2c: i2c@12460000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x12460000 0x1000>; + interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + }; + gsbi2: gsbi@12480000 { compatible = "qcom,gsbi-v1.0.0"; cell-index = <2>; @@ -530,7 +603,7 @@ status = "disabled"; }; - i2c@124a0000 { + gsbi2_i2c: i2c@124a0000 { compatible = "qcom,i2c-qup-v1.1.1"; reg = <0x124a0000 0x1000>; interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>; @@ -631,6 +704,49 @@ }; }; + gsbi6: gsbi@16500000 { + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x16500000 0x100>; + cell-index = <6>; + clocks = <&gcc GSBI6_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + syscon-tcsr = <&tcsr>; + + status = "disabled"; + + gsbi6_i2c: i2c@16580000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x16580000 0x1000>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>; + clock-names = "core", "iface"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + gsbi6_spi: spi@16580000 { + compatible = "qcom,spi-qup-v1.1.1"; + reg = <0x16580000 0x1000>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>; + clock-names = "core", "iface"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + }; + gsbi7: gsbi@16600000 { status = "disabled"; compatible = "qcom,gsbi-v1.0.0"; @@ -652,6 +768,20 @@ clock-names = "core", "iface"; status = "disabled"; }; + + gsbi7_i2c: i2c@16680000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x16680000 0x1000>; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GSBI7_QUP_CLK>, <&gcc GSBI7_H_CLK>; + clock-names = "core", "iface"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; }; rng@1a500000 { @@ -723,10 +853,13 @@ }; qfprom: qfprom@700000 { - compatible = "qcom,qfprom"; + compatible = "qcom,ipq8064-qfprom", "qcom,qfprom"; reg = <0x00700000 0x1000>; #address-cells = <1>; #size-cells = <1>; + speedbin_efuse: speedbin@c0 { + reg = <0xc0 0x4>; + }; tsens_calib: calib@400 { reg = <0x400 0xb>; }; @@ -773,6 +906,8 @@ rpmcc: clock-controller { compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc"; #clock-cells = <1>; + clocks = <&pxo_board>; + clock-names = "pxo"; }; }; @@ -784,7 +919,7 @@ l2cc: clock-controller@2011000 { compatible = "qcom,kpss-gcc", "syscon"; reg = <0x2011000 0x1000>; - clocks = <&gcc PLL8_VOTE>, <&gcc PXO_SRC>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; clock-names = "pll8_vote", "pxo"; clock-output-names = "acpu_l2_aux"; }; @@ -810,7 +945,7 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00100000 /* downstream I/O */ + ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00010000 /* downstream I/O */ 0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* non-prefetchable memory */ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; @@ -861,7 +996,7 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00100000 /* downstream I/O */ + ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00010000 /* downstream I/O */ 0x82000000 0 0x2e000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; @@ -912,7 +1047,7 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00100000 /* downstream I/O */ + ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00010000 /* downstream I/O */ 0x82000000 0 0x32000000 0x32000000 0 0x03e00000>; /* non-prefetchable memory */ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; @@ -967,7 +1102,7 @@ gmac0: ethernet@37000000 { device_type = "network"; - compatible = "qcom,ipq806x-gmac"; + compatible = "qcom,ipq806x-gmac", "snps,dwmac"; reg = <0x37000000 0x200000>; interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; @@ -991,7 +1126,7 @@ gmac1: ethernet@37200000 { device_type = "network"; - compatible = "qcom,ipq806x-gmac"; + compatible = "qcom,ipq806x-gmac", "snps,dwmac"; reg = <0x37200000 0x200000>; interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; @@ -1015,7 +1150,7 @@ gmac2: ethernet@37400000 { device_type = "network"; - compatible = "qcom,ipq806x-gmac"; + compatible = "qcom,ipq806x-gmac", "snps,dwmac"; reg = <0x37400000 0x200000>; interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; @@ -1039,7 +1174,7 @@ gmac3: ethernet@37600000 { device_type = "network"; - compatible = "qcom,ipq806x-gmac"; + compatible = "qcom,ipq806x-gmac", "snps,dwmac"; reg = <0x37600000 0x200000>; interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; @@ -1113,6 +1248,8 @@ clocks = <&gcc USB30_1_UTMI_CLK>; clock-names = "ref"; #phy-cells = <0>; + + status = "disabled"; }; ss_phy_1: phy@110f8830 { @@ -1121,6 +1258,8 @@ clocks = <&gcc USB30_1_MASTER_CLK>; clock-names = "ref"; #phy-cells = <0>; + + status = "disabled"; }; usb3_1: usb3@110f8800 { @@ -1184,16 +1323,16 @@ ranges; sdcc1: mmc@12400000 { - status = "disabled"; - compatible = "arm,pl18x", "arm,primecell"; + status = "disabled"; + compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; - reg = <0x12400000 0x2000>; - interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x12400000 0x2000>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "cmd_irq"; - clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; - clock-names = "mclk", "apb_pclk"; - bus-width = <8>; - max-frequency = <96000000>; + clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + max-frequency = <96000000>; non-removable; cap-sd-highspeed; cap-mmc-highspeed; @@ -1204,18 +1343,18 @@ }; sdcc3: mmc@12180000 { - compatible = "arm,pl18x", "arm,primecell"; + compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; - status = "disabled"; - reg = <0x12180000 0x2000>; - interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + reg = <0x12180000 0x2000>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "cmd_irq"; - clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; - clock-names = "mclk", "apb_pclk"; - bus-width = <8>; + clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; cap-sd-highspeed; cap-mmc-highspeed; - max-frequency = <192000000>; + max-frequency = <192000000>; sd-uhs-sdr104; sd-uhs-ddr50; vqmmc-supply = <&vsdcc_fixed>; @@ -1223,5 +1362,12 @@ dma-names = "tx", "rx"; }; }; + + sfpb_mutex: hwlock@1200600 { + compatible = "qcom,sfpb-mutex"; + reg = <0x01200600 0x100>; + + #hwlock-cells = <1>; + }; }; }; diff --git a/dts/src/arm/qcom-mdm9615-wp8548.dtsi b/dts/src/arm/qcom-mdm9615-wp8548.dtsi index 10ad929759..49de1821ac 100644 --- a/dts/src/arm/qcom-mdm9615-wp8548.dtsi +++ b/dts/src/arm/qcom-mdm9615-wp8548.dtsi @@ -114,7 +114,7 @@ }; &pmicgpio { - usb_vbus_5v_pins: usb_vbus_5v_pins { + usb_vbus_5v_pins: usb-vbus-5v-state { pins = "gpio4"; function = "normal"; output-high; diff --git a/dts/src/arm/qcom-mdm9615.dtsi b/dts/src/arm/qcom-mdm9615.dtsi index 8f0752ce1c..b47c86412d 100644 --- a/dts/src/arm/qcom-mdm9615.dtsi +++ b/dts/src/arm/qcom-mdm9615.dtsi @@ -321,6 +321,7 @@ pmicgpio: gpio@150 { compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio"; + reg = <0x150>; interrupt-controller; #interrupt-cells = <2>; gpio-controller; @@ -361,7 +362,7 @@ arm,primecell-periphid = <0x00051180>; reg = <0x12180000 0x2000>; interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "cmd_irq"; + interrupt-names = "cmd_irq"; clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; clock-names = "mclk", "apb_pclk"; bus-width = <8>; @@ -381,7 +382,7 @@ status = "disabled"; reg = <0x12140000 0x2000>; interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "cmd_irq"; + interrupt-names = "cmd_irq"; clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>; clock-names = "mclk", "apb_pclk"; bus-width = <4>; @@ -411,7 +412,7 @@ interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "ack", "err", "wakeup"; + interrupt-names = "ack", "err", "wakeup"; regulators { compatible = "qcom,rpm-pm8018-regulators"; diff --git a/dts/src/arm/qcom-msm8226.dtsi b/dts/src/arm/qcom-msm8226.dtsi index 28eca15b57..0b5effdb26 100644 --- a/dts/src/arm/qcom-msm8226.dtsi +++ b/dts/src/arm/qcom-msm8226.dtsi @@ -134,7 +134,7 @@ reg = <0xf9011000 0x1000>; }; - sdhc_1: sdhci@f9824900 { + sdhc_1: mmc@f9824900 { compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; reg-names = "hc_mem", "core_mem"; @@ -150,7 +150,7 @@ status = "disabled"; }; - sdhc_2: sdhci@f98a4900 { + sdhc_2: mmc@f98a4900 { compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; reg-names = "hc_mem", "core_mem"; @@ -166,7 +166,7 @@ status = "disabled"; }; - sdhc_3: sdhci@f9864900 { + sdhc_3: mmc@f9864900 { compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf9864900 0x11c>, <0xf9864000 0x800>; reg-names = "hc_mem", "core_mem"; diff --git a/dts/src/arm/qcom-msm8660.dtsi b/dts/src/arm/qcom-msm8660.dtsi index 47b97daece..63a501c63c 100644 --- a/dts/src/arm/qcom-msm8660.dtsi +++ b/dts/src/arm/qcom-msm8660.dtsi @@ -56,7 +56,7 @@ clock-frequency = <19200000>; }; - pxo_board { + pxo_board: pxo_board { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <27000000>; @@ -392,25 +392,27 @@ }; l2cc: clock-controller@2082000 { - compatible = "qcom,kpss-gcc", "syscon"; - reg = <0x02082000 0x1000>; + compatible = "qcom,kpss-gcc", "syscon"; + reg = <0x02082000 0x1000>; }; rpm: rpm@104000 { - compatible = "qcom,rpm-msm8660"; - reg = <0x00104000 0x1000>; - qcom,ipc = <&l2cc 0x8 2>; - - interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "ack", "err", "wakeup"; + compatible = "qcom,rpm-msm8660"; + reg = <0x00104000 0x1000>; + qcom,ipc = <&l2cc 0x8 2>; + + interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ack", "err", "wakeup"; clocks = <&gcc RPM_MSG_RAM_H_CLK>; clock-names = "ram"; rpmcc: clock-controller { - compatible = "qcom,rpmcc-msm8660", "qcom,rpmcc"; + compatible = "qcom,rpmcc-msm8660", "qcom,rpmcc"; #clock-cells = <1>; + clocks = <&pxo_board>; + clock-names = "pxo"; }; pm8901-regulators { @@ -486,80 +488,80 @@ #size-cells = <1>; ranges; sdcc1: mmc@12400000 { - status = "disabled"; - compatible = "arm,pl18x", "arm,primecell"; + status = "disabled"; + compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; - reg = <0x12400000 0x8000>; - interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "cmd_irq"; - clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; - clock-names = "mclk", "apb_pclk"; - bus-width = <8>; - max-frequency = <48000000>; + reg = <0x12400000 0x8000>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + max-frequency = <48000000>; non-removable; cap-sd-highspeed; cap-mmc-highspeed; }; sdcc2: mmc@12140000 { - status = "disabled"; - compatible = "arm,pl18x", "arm,primecell"; + status = "disabled"; + compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; - reg = <0x12140000 0x8000>; - interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "cmd_irq"; - clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>; - clock-names = "mclk", "apb_pclk"; - bus-width = <8>; - max-frequency = <48000000>; + reg = <0x12140000 0x8000>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + max-frequency = <48000000>; cap-sd-highspeed; cap-mmc-highspeed; }; sdcc3: mmc@12180000 { - compatible = "arm,pl18x", "arm,primecell"; + compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; - status = "disabled"; - reg = <0x12180000 0x8000>; - interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "cmd_irq"; - clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; - clock-names = "mclk", "apb_pclk"; - bus-width = <4>; + status = "disabled"; + reg = <0x12180000 0x8000>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <4>; cap-sd-highspeed; cap-mmc-highspeed; - max-frequency = <48000000>; + max-frequency = <48000000>; no-1-8-v; }; sdcc4: mmc@121c0000 { - compatible = "arm,pl18x", "arm,primecell"; + compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; - status = "disabled"; - reg = <0x121c0000 0x8000>; - interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "cmd_irq"; - clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>; - clock-names = "mclk", "apb_pclk"; - bus-width = <4>; - max-frequency = <48000000>; + status = "disabled"; + reg = <0x121c0000 0x8000>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <4>; + max-frequency = <48000000>; cap-sd-highspeed; cap-mmc-highspeed; }; sdcc5: mmc@12200000 { - compatible = "arm,pl18x", "arm,primecell"; + compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; - status = "disabled"; - reg = <0x12200000 0x8000>; - interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "cmd_irq"; - clocks = <&gcc SDC5_CLK>, <&gcc SDC5_H_CLK>; - clock-names = "mclk", "apb_pclk"; - bus-width = <4>; + status = "disabled"; + reg = <0x12200000 0x8000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC5_CLK>, <&gcc SDC5_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <4>; cap-sd-highspeed; cap-mmc-highspeed; - max-frequency = <48000000>; + max-frequency = <48000000>; }; }; diff --git a/dts/src/arm/qcom-msm8960.dtsi b/dts/src/arm/qcom-msm8960.dtsi index 4a2d74cf01..19554f3b51 100644 --- a/dts/src/arm/qcom-msm8960.dtsi +++ b/dts/src/arm/qcom-msm8960.dtsi @@ -148,19 +148,19 @@ }; l2cc: clock-controller@2011000 { - compatible = "qcom,kpss-gcc", "syscon"; - reg = <0x2011000 0x1000>; + compatible = "qcom,kpss-gcc", "syscon"; + reg = <0x2011000 0x1000>; }; rpm@108000 { - compatible = "qcom,rpm-msm8960"; - reg = <0x108000 0x1000>; - qcom,ipc = <&l2cc 0x8 2>; + compatible = "qcom,rpm-msm8960"; + reg = <0x108000 0x1000>; + qcom,ipc = <&l2cc 0x8 2>; - interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "ack", "err", "wakeup"; + interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ack", "err", "wakeup"; regulators { compatible = "qcom,rpm-pm8921-regulators"; @@ -268,16 +268,16 @@ #size-cells = <1>; ranges; sdcc1: mmc@12400000 { - status = "disabled"; - compatible = "arm,pl18x", "arm,primecell"; + status = "disabled"; + compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; - reg = <0x12400000 0x8000>; - interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "cmd_irq"; - clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; - clock-names = "mclk", "apb_pclk"; - bus-width = <8>; - max-frequency = <96000000>; + reg = <0x12400000 0x8000>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + max-frequency = <96000000>; non-removable; cap-sd-highspeed; cap-mmc-highspeed; @@ -285,18 +285,18 @@ }; sdcc3: mmc@12180000 { - compatible = "arm,pl18x", "arm,primecell"; + compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; - status = "disabled"; - reg = <0x12180000 0x8000>; - interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "cmd_irq"; - clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; - clock-names = "mclk", "apb_pclk"; - bus-width = <4>; + status = "disabled"; + reg = <0x12180000 0x8000>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <4>; cap-sd-highspeed; cap-mmc-highspeed; - max-frequency = <192000000>; + max-frequency = <192000000>; no-1-8-v; vmmc-supply = <&vsdcc_fixed>; }; diff --git a/dts/src/arm/qcom-msm8974-lge-nexus5-hammerhead.dts b/dts/src/arm/qcom-msm8974-lge-nexus5-hammerhead.dts index 9493886a5c..ec5d340562 100644 --- a/dts/src/arm/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/dts/src/arm/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -3,6 +3,7 @@ #include "qcom-pm8841.dtsi" #include "qcom-pm8941.dtsi" #include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> / { @@ -24,14 +25,14 @@ pinctrl-names = "default"; pinctrl-0 = <&gpio_keys_pin_a>; - volume-up { + key-volume-up { label = "volume_up"; gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; linux,input-type = <1>; linux,code = <KEY_VOLUMEUP>; }; - volume-down { + key-volume-down { label = "volume_down"; gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; linux,input-type = <1>; @@ -272,7 +273,7 @@ }; &pm8941_gpios { - gpio_keys_pin_a: gpio-keys-active { + gpio_keys_pin_a: gpio-keys-active-state { pins = "gpio2", "gpio3"; function = "normal"; @@ -280,7 +281,7 @@ power-source = <PM8941_GPIO_S3>; }; - fuelgauge_pin: fuelgauge-int { + fuelgauge_pin: fuelgauge-int-state { pins = "gpio9"; function = "normal"; @@ -289,7 +290,7 @@ power-source = <PM8941_GPIO_S3>; }; - wlan_sleep_clk_pin: wl-sleep-clk { + wlan_sleep_clk_pin: wl-sleep-clk-state { pins = "gpio16"; function = "func2"; @@ -297,7 +298,7 @@ power-source = <PM8941_GPIO_S3>; }; - wlan_regulator_pin: wl-reg-active { + wlan_regulator_pin: wl-reg-active-state { pins = "gpio17"; function = "normal"; @@ -313,6 +314,35 @@ }; }; +&pm8941_lpg { + status = "okay"; + + qcom,power-source = <1>; + + multi-led { + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@7 { + reg = <7>; + color = <LED_COLOR_ID_RED>; + }; + + led@6 { + reg = <6>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@5 { + reg = <5>; + color = <LED_COLOR_ID_BLUE>; + }; + }; +}; + &rpm_requests { pm8841-regulators { compatible = "qcom,rpm-pm8841-regulators"; diff --git a/dts/src/arm/qcom-msm8974-sony-xperia-rhine.dtsi b/dts/src/arm/qcom-msm8974-sony-xperia-rhine.dtsi index 1d21de46f8..5a70683d91 100644 --- a/dts/src/arm/qcom-msm8974-sony-xperia-rhine.dtsi +++ b/dts/src/arm/qcom-msm8974-sony-xperia-rhine.dtsi @@ -3,6 +3,7 @@ #include "qcom-pm8841.dtsi" #include "qcom-pm8941.dtsi" #include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> / { @@ -20,28 +21,28 @@ pinctrl-names = "default"; pinctrl-0 = <&gpio_keys_pin_a>; - volume-down { + key-volume-down { label = "volume_down"; gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; linux,input-type = <1>; linux,code = <KEY_VOLUMEDOWN>; }; - camera-snapshot { + key-camera-snapshot { label = "camera_snapshot"; gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; linux,input-type = <1>; linux,code = <KEY_CAMERA>; }; - camera-focus { + key-camera-focus { label = "camera_focus"; gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>; linux,input-type = <1>; linux,code = <KEY_CAMERA_FOCUS>; }; - volume-up { + key-volume-up { label = "volume_up"; gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; linux,input-type = <1>; @@ -163,7 +164,7 @@ }; &pm8941_gpios { - gpio_keys_pin_a: gpio-keys-active { + gpio_keys_pin_a: gpio-keys-active-state { pins = "gpio2", "gpio3", "gpio4", "gpio5"; function = "normal"; @@ -172,6 +173,35 @@ }; }; +&pm8941_lpg { + status = "okay"; + + qcom,power-source = <1>; + + rgb-led { + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@5 { + reg = <5>; + color = <LED_COLOR_ID_BLUE>; + }; + + led@6 { + reg = <6>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@7 { + reg = <7>; + color = <LED_COLOR_ID_RED>; + }; + }; +}; + &pm8941_wled { status = "okay"; diff --git a/dts/src/arm/qcom-msm8974.dtsi b/dts/src/arm/qcom-msm8974.dtsi index c3b8a6d630..8baca2a777 100644 --- a/dts/src/arm/qcom-msm8974.dtsi +++ b/dts/src/arm/qcom-msm8974.dtsi @@ -96,7 +96,7 @@ firmware { scm { - compatible = "qcom,scm"; + compatible = "qcom,scm-msm8974", "qcom,scm"; clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>; clock-names = "core", "bus", "iface"; }; @@ -436,7 +436,7 @@ reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>; }; - sdhc_1: sdhci@f9824900 { + sdhc_1: mmc@f9824900 { compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; reg-names = "hc_mem", "core_mem"; @@ -453,7 +453,7 @@ status = "disabled"; }; - sdhc_3: sdhci@f9864900 { + sdhc_3: mmc@f9864900 { compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf9864900 0x11c>, <0xf9864000 0x800>; reg-names = "hc_mem", "core_mem"; @@ -472,7 +472,7 @@ status = "disabled"; }; - sdhc_2: sdhci@f98a4900 { + sdhc_2: mmc@f98a4900 { compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; reg-names = "hc_mem", "core_mem"; @@ -580,7 +580,7 @@ blsp2_uart1: serial@f995d000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0xf995d000 0x1000>; - interrupts = <GIC_SPI 113 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP2_UART1_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; pinctrl-names = "default", "sleep"; @@ -1128,10 +1128,10 @@ }; qfprom: qfprom@fc4bc000 { + compatible = "qcom,msm8974-qfprom", "qcom,qfprom"; + reg = <0xfc4bc000 0x1000>; #address-cells = <1>; #size-cells = <1>; - compatible = "qcom,qfprom"; - reg = <0xfc4bc000 0x1000>; tsens_calib: calib@d0 { reg = <0xd0 0x18>; }; @@ -1156,6 +1156,18 @@ #interrupt-cells = <4>; }; + bam_dmux_dma: dma-controller@fc834000 { + compatible = "qcom,bam-v1.4.0"; + reg = <0xfc834000 0x7000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + qcom,ee = <0>; + + num-channels = <6>; + qcom,num-ees = <1>; + qcom,powered-remotely; + }; + remoteproc_mss: remoteproc@fc880000 { compatible = "qcom,msm8974-mss-pil"; reg = <0xfc880000 0x100>, <0xfc820000 0x020>; @@ -1182,6 +1194,8 @@ qcom,smem-states = <&modem_smp2p_out 0>; qcom,smem-state-names = "stop"; + status = "disabled"; + mba { memory-region = <&mba_region>; }; @@ -1190,6 +1204,20 @@ memory-region = <&mpss_region>; }; + bam_dmux: bam-dmux { + compatible = "qcom,bam-dmux"; + + interrupt-parent = <&modem_smsm>; + interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "pc", "pc-ack"; + + qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>; + qcom,smem-state-names = "pc", "pc-ack"; + + dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>; + dma-names = "tx", "rx"; + }; + smd-edge { interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; @@ -1608,7 +1636,7 @@ status = "disabled"; - gpu_opp_table: opp_table { + gpu_opp_table: opp-table { compatible = "operating-points-v2"; opp-320000000 { @@ -1625,11 +1653,12 @@ }; }; - ocmem@fdd00000 { + sram@fdd00000 { compatible = "qcom,msm8974-ocmem"; reg = <0xfdd00000 0x2000>, <0xfec00000 0x180000>; reg-names = "ctrl", "mem"; + ranges = <0 0xfec00000 0x180000>; clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, <&mmcc OCMEMCX_OCMEMNOC_CLK>; clock-names = "core", "iface"; @@ -1661,6 +1690,8 @@ qcom,smem-states = <&adsp_smp2p_out 0>; qcom,smem-state-names = "stop"; + status = "disabled"; + smd-edge { interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; @@ -1672,8 +1703,8 @@ }; }; - imem: imem@fe805000 { - compatible = "syscon", "simple-mfd"; + imem: sram@fe805000 { + compatible = "qcom,msm8974-imem", "syscon", "simple-mfd"; reg = <0xfe805000 0x1000>; reboot-mode { diff --git a/dts/src/arm/qcom-msm8974pro-fairphone-fp2.dts b/dts/src/arm/qcom-msm8974pro-fairphone-fp2.dts index 58cb2ce1e4..ff6e006676 100644 --- a/dts/src/arm/qcom-msm8974pro-fairphone-fp2.dts +++ b/dts/src/arm/qcom-msm8974pro-fairphone-fp2.dts @@ -3,6 +3,7 @@ #include "qcom-pm8841.dtsi" #include "qcom-pm8941.dtsi" #include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> / { @@ -25,7 +26,7 @@ pinctrl-names = "default"; pinctrl-0 = <&gpio_keys_pin_a>; - camera-snapshot { + key-camera-snapshot { label = "camera_snapshot"; gpios = <&pm8941_gpios 1 GPIO_ACTIVE_LOW>; linux,code = <KEY_CAMERA>; @@ -33,7 +34,7 @@ debounce-interval = <15>; }; - volume-down { + key-volume-down { label = "volume_down"; gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; @@ -41,7 +42,7 @@ debounce-interval = <15>; }; - volume-up { + key-volume-up { label = "volume_up"; gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; @@ -78,9 +79,9 @@ &imem { reboot-mode { - mode-normal = <0x77665501>; - mode-bootloader = <0x77665500>; - mode-recovery = <0x77665502>; + mode-normal = <0x77665501>; + mode-bootloader = <0x77665500>; + mode-recovery = <0x77665502>; }; }; @@ -110,7 +111,7 @@ }; &pm8941_gpios { - gpio_keys_pin_a: gpio-keys-active { + gpio_keys_pin_a: gpio-keys-active-state { pins = "gpio1", "gpio2", "gpio5"; function = "normal"; @@ -119,6 +120,35 @@ }; }; +&pm8941_lpg { + status = "okay"; + + qcom,power-source = <1>; + + multi-led { + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@7 { + reg = <7>; + color = <LED_COLOR_ID_RED>; + }; + + led@6 { + reg = <6>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@5 { + reg = <5>; + color = <LED_COLOR_ID_BLUE>; + }; + }; +}; + &pronto { status = "okay"; @@ -147,10 +177,12 @@ }; &remoteproc_adsp { + status = "okay"; cx-supply = <&pm8841_s2>; }; &remoteproc_mss { + status = "okay"; cx-supply = <&pm8841_s2>; mss-supply = <&pm8841_s3>; mx-supply = <&pm8841_s1>; diff --git a/dts/src/arm/qcom-msm8974pro-samsung-klte.dts b/dts/src/arm/qcom-msm8974pro-samsung-klte.dts index d6b2300a82..983e10c3d8 100644 --- a/dts/src/arm/qcom-msm8974pro-samsung-klte.dts +++ b/dts/src/arm/qcom-msm8974pro-samsung-klte.dts @@ -25,7 +25,7 @@ pinctrl-names = "default"; pinctrl-0 = <&gpio_keys_pin_a>; - volume-down { + key-volume-down { label = "volume_down"; gpios = <&pma8084_gpios 2 GPIO_ACTIVE_LOW>; linux,input-type = <1>; @@ -33,7 +33,7 @@ debounce-interval = <15>; }; - home-key { + key-home { label = "home_key"; gpios = <&pma8084_gpios 3 GPIO_ACTIVE_LOW>; linux,input-type = <1>; @@ -42,7 +42,7 @@ debounce-interval = <15>; }; - volume-up { + key-volume-up { label = "volume_up"; gpios = <&pma8084_gpios 5 GPIO_ACTIVE_LOW>; linux,input-type = <1>; @@ -398,7 +398,7 @@ }; &pma8084_gpios { - gpio_keys_pin_a: gpio-keys-active { + gpio_keys_pin_a: gpio-keys-active-state { pins = "gpio2", "gpio3", "gpio5"; function = "normal"; @@ -406,7 +406,7 @@ power-source = <PMA8084_GPIO_S4>; }; - touchkey_pin: touchkey-int-pin { + touchkey_pin: touchkey-int-state { pins = "gpio6"; function = "normal"; bias-disable; @@ -414,7 +414,7 @@ power-source = <PMA8084_GPIO_S4>; }; - touch_pin: touchscreen-int-pin { + touch_pin: touchscreen-int-state { pins = "gpio8"; function = "normal"; bias-disable; @@ -422,7 +422,7 @@ power-source = <PMA8084_GPIO_S4>; }; - panel_en_pin: panel-en-pin { + panel_en_pin: panel-en-state { pins = "gpio14"; function = "normal"; bias-pull-up; @@ -430,7 +430,7 @@ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; }; - wlan_sleep_clk_pin: wlan-sleep-clk-pin { + wlan_sleep_clk_pin: wlan-sleep-clk-state { pins = "gpio16"; function = "func2"; @@ -439,7 +439,7 @@ qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; }; - panel_rst_pin: panel-rst-pin { + panel_rst_pin: panel-rst-state { pins = "gpio17"; function = "normal"; bias-disable; @@ -447,7 +447,7 @@ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; }; - fuelgauge_pin: fuelgauge-int-pin { + fuelgauge_pin: fuelgauge-int-state { pins = "gpio21"; function = "normal"; bias-disable; @@ -457,10 +457,12 @@ }; &remoteproc_adsp { + status = "okay"; cx-supply = <&pma8084_s2>; }; &remoteproc_mss { + status = "okay"; cx-supply = <&pma8084_s2>; mss-supply = <&pma8084_s6>; mx-supply = <&pma8084_s1>; diff --git a/dts/src/arm/qcom-msm8974pro-sony-xperia-shinano-castor.dts b/dts/src/arm/qcom-msm8974pro-sony-xperia-shinano-castor.dts index 9bd8faea61..3f45f5c5d3 100644 --- a/dts/src/arm/qcom-msm8974pro-sony-xperia-shinano-castor.dts +++ b/dts/src/arm/qcom-msm8974pro-sony-xperia-shinano-castor.dts @@ -3,6 +3,7 @@ #include "qcom-pm8841.dtsi" #include "qcom-pm8941.dtsi" #include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> / { @@ -24,28 +25,28 @@ pinctrl-names = "default"; pinctrl-0 = <&gpio_keys_pin_a>; - volume-down { + key-volume-down { label = "volume_down"; gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; linux,input-type = <1>; linux,code = <KEY_VOLUMEDOWN>; }; - camera-snapshot { + key-camera-snapshot { label = "camera_snapshot"; gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; linux,input-type = <1>; linux,code = <KEY_CAMERA>; }; - camera-focus { + key-camera-focus { label = "camera_focus"; gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>; linux,input-type = <1>; linux,code = <KEY_CAMERA_FOCUS>; }; - volume-up { + key-volume-up { label = "volume_up"; gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; linux,input-type = <1>; @@ -244,7 +245,7 @@ }; &pm8941_gpios { - gpio_keys_pin_a: gpio-keys-active { + gpio_keys_pin_a: gpio-keys-active-state { pins = "gpio2", "gpio5"; function = "normal"; @@ -252,7 +253,7 @@ power-source = <PM8941_GPIO_S3>; }; - bt_reg_on_pin: bt-reg-on { + bt_reg_on_pin: bt-reg-on-state { pins = "gpio16"; function = "normal"; @@ -260,7 +261,7 @@ power-source = <PM8941_GPIO_S3>; }; - wlan_sleep_clk_pin: wl-sleep-clk { + wlan_sleep_clk_pin: wl-sleep-clk-state { pins = "gpio17"; function = "func2"; @@ -268,7 +269,7 @@ power-source = <PM8941_GPIO_S3>; }; - wlan_regulator_pin: wl-reg-active { + wlan_regulator_pin: wl-reg-active-state { pins = "gpio18"; function = "normal"; @@ -276,7 +277,7 @@ power-source = <PM8941_GPIO_S3>; }; - lcd_dcdc_en_pin_a: lcd-dcdc-en-active { + lcd_dcdc_en_pin_a: lcd-dcdc-en-active-state { pins = "gpio20"; function = "normal"; @@ -288,6 +289,35 @@ }; +&pm8941_lpg { + status = "okay"; + + qcom,power-source = <1>; + + rgb-led { + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@5 { + reg = <5>; + color = <LED_COLOR_ID_BLUE>; + }; + + led@6 { + reg = <6>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@7 { + reg = <7>; + color = <LED_COLOR_ID_RED>; + }; + }; +}; + &rpm_requests { pm8941-regulators { compatible = "qcom,rpm-pm8941-regulators"; diff --git a/dts/src/arm/qcom-pm8841.dtsi b/dts/src/arm/qcom-pm8841.dtsi index 2caf71eacb..b5cdde034d 100644 --- a/dts/src/arm/qcom-pm8841.dtsi +++ b/dts/src/arm/qcom-pm8841.dtsi @@ -24,6 +24,7 @@ compatible = "qcom,spmi-temp-alarm"; reg = <0x2400>; interrupts = <4 0x24 0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <0>; }; }; diff --git a/dts/src/arm/qcom-pm8941.dtsi b/dts/src/arm/qcom-pm8941.dtsi index cdd2bdb77b..59d0cde632 100644 --- a/dts/src/arm/qcom-pm8941.dtsi +++ b/dts/src/arm/qcom-pm8941.dtsi @@ -68,7 +68,7 @@ interrupt-controller; #interrupt-cells = <2>; - boost_bypass_n_pin: boost-bypass { + boost_bypass_n_pin: boost-bypass-state { pins = "gpio21"; function = "normal"; }; @@ -144,6 +144,16 @@ #address-cells = <1>; #size-cells = <0>; + pm8941_lpg: lpg { + compatible = "qcom,pm8941-lpg"; + + #address-cells = <1>; + #size-cells = <0>; + #pwm-cells = <2>; + + status = "disabled"; + }; + pm8941_wled: wled@d800 { compatible = "qcom,pm8941-wled"; reg = <0xd800>; diff --git a/dts/src/arm/qcom-pmx55.dtsi b/dts/src/arm/qcom-pmx55.dtsi index 6571b88d01..9de7578a4c 100644 --- a/dts/src/arm/qcom-pmx55.dtsi +++ b/dts/src/arm/qcom-pmx55.dtsi @@ -69,6 +69,7 @@ compatible = "qcom,pmx55-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; + gpio-ranges = <&pmx55_gpios 0 0 11>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/dts/src/arm/qcom-pmx65.dtsi b/dts/src/arm/qcom-pmx65.dtsi index 5411b833d2..abf229a8b7 100644 --- a/dts/src/arm/qcom-pmx65.dtsi +++ b/dts/src/arm/qcom-pmx65.dtsi @@ -21,9 +21,10 @@ }; pmx65_gpios: pinctrl@8800 { - compatible = "qcom,pmx65-gpio"; + compatible = "qcom,pmx65-gpio", "qcom,spmi-gpio"; reg = <0x8800>; gpio-controller; + gpio-ranges = <&pmx65_gpios 0 0 16>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/dts/src/arm/qcom-sdx55.dtsi b/dts/src/arm/qcom-sdx55.dtsi index 1c2b208a56..c72540223f 100644 --- a/dts/src/arm/qcom-sdx55.dtsi +++ b/dts/src/arm/qcom-sdx55.dtsi @@ -206,7 +206,7 @@ blsp1_uart3: serial@831000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x00831000 0x200>; - interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc 30>, <&gcc 9>; clock-names = "core", "iface"; @@ -388,7 +388,7 @@ reg = <0x01fc0000 0x1000>; }; - sdhc_1: sdhci@8804000 { + sdhc_1: mmc@8804000 { compatible = "qcom,sdx55-sdhci", "qcom,sdhci-msm-v5"; reg = <0x08804000 0x1000>; interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, @@ -561,8 +561,8 @@ #interrupt-cells = <2>; }; - imem@1468f000 { - compatible = "simple-mfd"; + sram@1468f000 { + compatible = "qcom,sdx55-imem", "syscon", "simple-mfd"; reg = <0x1468f000 0x1000>; #address-cells = <1>; diff --git a/dts/src/arm/qcom-sdx65-mtp.dts b/dts/src/arm/qcom-sdx65-mtp.dts index 79dc31aa7c..85ea02d836 100644 --- a/dts/src/arm/qcom-sdx65-mtp.dts +++ b/dts/src/arm/qcom-sdx65-mtp.dts @@ -64,10 +64,6 @@ }; }; -&blsp1_uart3 { - status = "ok"; -}; - &apps_rsc { pmx65-rpmh-regulators { compatible = "qcom,pmx65-rpmh-regulators"; @@ -123,7 +119,7 @@ regulator-max-microvolt = <1300000>; }; - ldo1 { + vreg_l1b_1p2: ldo1 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; @@ -141,13 +137,13 @@ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; - ldo4 { + vreg_l4b_0p88: ldo4 { regulator-min-microvolt = <880000>; regulator-max-microvolt = <912000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; - ldo5 { + vreg_l5b_1p8: ldo5 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; @@ -177,7 +173,7 @@ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; - ldo10 { + vreg_l10b_3p08: ldo10 { regulator-min-microvolt = <3088000>; regulator-max-microvolt = <3088000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; @@ -244,3 +240,52 @@ }; }; }; + +&blsp1_uart3 { + status = "okay"; +}; + +&qpic_bam { + status = "okay"; +}; + +&qpic_nand { + status = "okay"; + + nand@0 { + reg = <0>; + + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-bus-width = <8>; + /* ico and efs2 partitions are secured */ + secure-regions = /bits/ 64 <0x500000 0x500000 + 0xa00000 0xb00000>; + }; +}; + +&remoteproc_mpss { + status = "okay"; + memory-region = <&mpss_adsp_mem>; +}; + +&usb { + status = "okay"; +}; + +&usb_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_hsphy { + status = "okay"; + vdda-pll-supply = <&vreg_l4b_0p88>; + vdda33-supply = <&vreg_l10b_3p08>; + vdda18-supply = <&vreg_l5b_1p8>; +}; + +&usb_qmpphy { + status = "okay"; + vdda-phy-supply = <&vreg_l4b_0p88>; + vdda-pll-supply = <&vreg_l1b_1p2>; +}; diff --git a/dts/src/arm/qcom-sdx65.dtsi b/dts/src/arm/qcom-sdx65.dtsi index df6f9d6288..8daefd5021 100644 --- a/dts/src/arm/qcom-sdx65.dtsi +++ b/dts/src/arm/qcom-sdx65.dtsi @@ -37,6 +37,12 @@ clock-output-names = "sleep_clk"; #clock-cells = <0>; }; + + nand_clk_dummy: nand-clk-dummy { + compatible = "fixed-clock"; + clock-frequency = <32764>; + #clock-cells = <0>; + }; }; cpus { @@ -48,9 +54,50 @@ compatible = "arm,cortex-a7"; reg = <0x0>; enable-method = "psci"; + clocks = <&apcs>; + power-domains = <&rpmhpd SDX65_CX_AO>; + power-domain-names = "rpmhpd"; + operating-points-v2 = <&cpu_opp_table>; }; }; + cpu_opp_table: cpu-opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-345600000 { + opp-hz = /bits/ 64 <345600000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-576000000 { + opp-hz = /bits/ 64 <576000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-1094400000 { + opp-hz = /bits/ 64 <1094400000>; + required-opps = <&rpmhpd_opp_nom>; + }; + + opp-1497600000 { + opp-hz = /bits/ 64 <1497600000>; + required-opps = <&rpmhpd_opp_turbo>; + }; + }; + + firmware { + scm { + compatible = "qcom,scm-sdx65", "qcom,scm"; + }; + }; + + mc_virt: interconnect-mc-virt { + compatible = "qcom,sdx65-mc-virt"; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -87,8 +134,10 @@ }; smem_mem: memory@8fe20000 { - no-map; + compatible = "qcom,smem"; reg = <0x8fe20000 0xc0000>; + hwlocks = <&tcsr_mutex 3>; + no-map; }; cmd_db: reserved-memory@8fee0000 { @@ -113,6 +162,37 @@ }; }; + smp2p-mpss { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>; + mboxes = <&apcs 14>; + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + ipa_smp2p_out: ipa-ap-to-modem { + qcom,entry-name = "ipa"; + #qcom,smem-state-cells = <1>; + }; + + ipa_smp2p_in: ipa-modem-to-ap { + qcom,entry-name = "ipa"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + soc: soc { #address-cells = <1>; #size-cells = <1>; @@ -124,6 +204,7 @@ reg = <0x00100000 0x001f7400>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>; clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk"; + #power-domain-cells = <1>; #clock-cells = <1>; #reset-cells = <1>; }; @@ -137,13 +218,120 @@ status = "disabled"; }; + usb_hsphy: phy@ff4000 { + compatible = "qcom,usb-snps-hs-7nm-phy"; + reg = <0xff4000 0x120>; + #phy-cells = <0>; + status = "disabled"; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + resets = <&gcc GCC_QUSB2PHY_BCR>; + }; + + usb_qmpphy: phy@ff6000 { + compatible = "qcom,sdx65-qmp-usb3-uni-phy"; + reg = <0x00ff6000 0x1c8>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_USB3_PHY_AUX_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_EN>; + clock-names = "aux", "cfg_ahb", "ref"; + + resets = <&gcc GCC_USB3PHY_PHY_BCR>, + <&gcc GCC_USB3_PHY_BCR>; + reset-names = "phy", "common"; + + usb_ssphy: phy@ff6200 { + reg = <0x00ff6e00 0x160>, + <0x00ff7000 0x1ec>, + <0x00ff6200 0x1e00>; + #phy-cells = <0>; + #clock-cells = <0>; + clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_uni_phy_pipe_clk_src"; + }; + }; + + system_noc: interconnect@1620000 { + compatible = "qcom,sdx65-system-noc"; + reg = <0x01620000 0x31200>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + qpic_bam: dma-controller@1b04000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x01b04000 0x1c000>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rpmhcc RPMH_QPIC_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + status = "disabled"; + }; + + qpic_nand: nand-controller@1b30000 { + compatible = "qcom,sdx55-nand"; + reg = <0x01b30000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&rpmhcc RPMH_QPIC_CLK>, + <&nand_clk_dummy>; + clock-names = "core", "aon"; + + dmas = <&qpic_bam 0>, + <&qpic_bam 1>, + <&qpic_bam 2>; + dma-names = "tx", "rx", "cmd"; + status = "disabled"; + }; + tcsr_mutex: hwlock@1f40000 { compatible = "qcom,tcsr-mutex"; reg = <0x01f40000 0x40000>; #hwlock-cells = <1>; }; - sdhc_1: sdhci@8804000 { + remoteproc_mpss: remoteproc@4080000 { + compatible = "qcom,sdx55-mpss-pas"; + reg = <0x04080000 0x4040>; + + interrupts-extended = <&intc GIC_SPI 250 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SDX65_CX>, + <&rpmhpd SDX65_MSS>; + power-domain-names = "cx", "mss"; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 114 IRQ_TYPE_EDGE_RISING>; + label = "mpss"; + qcom,remote-pid = <1>; + mboxes = <&apcs 15>; + }; + }; + + sdhc_1: mmc@8804000 { compatible = "qcom,sdx65-sdhci", "qcom,sdhci-msm-v5"; reg = <0x08804000 0x1000>; reg-names = "hc_mem"; @@ -156,6 +344,63 @@ status = "disabled"; }; + mem_noc: interconnect@9680000 { + compatible = "qcom,sdx65-mem-noc"; + reg = <0x09680000 0x27200>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + usb: usb@a6f8800 { + compatible = "qcom,sdx65-dwc3", "qcom,dwc3"; + reg = <0x0a6f8800 0x400>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_USB30_SLV_AHB_CLK>, + <&gcc GCC_USB30_MASTER_CLK>, + <&gcc GCC_USB30_MSTR_AXI_CLK>, + <&gcc GCC_USB30_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SLEEP_CLK>; + clock-names = "cfg_noc", "core", "iface", "mock_utmi", + "sleep"; + + assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 76 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 18 IRQ_TYPE_EDGE_BOTH>, + <&pdc 19 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "hs_phy_irq", + "ss_phy_irq", + "dm_hs_phy_irq", + "dp_hs_phy_irq"; + + power-domains = <&gcc USB30_GDSC>; + + resets = <&gcc GCC_USB30_BCR>; + + usb_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0x0a600000 0xcd00>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x1a0 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_hsphy>, <&usb_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + restart@c264000 { + compatible = "qcom,pshold"; + reg = <0x0c264000 0x1000>; + }; + spmi_bus: qcom,spmi@c440000 { compatible = "qcom,spmi-pmic-arb"; reg = <0xc440000 0xd00>, @@ -196,6 +441,19 @@ interrupt-controller; }; + imem@1468f000 { + compatible = "simple-mfd"; + reg = <0x1468f000 0x1000>; + ranges = <0x0 0x1468f000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + pil-reloc@94c { + compatible = "qcom,pil-reloc-info"; + reg = <0x94c 0xc8>; + }; + }; + apps_smmu: iommu@15000000 { compatible = "qcom,sdx65-smmu-500", "arm,mmu-500"; reg = <0x15000000 0x40000>; @@ -262,6 +520,12 @@ #clock-cells = <0>; }; + watchdog@17817000 { + compatible = "qcom,apss-wdt-sdx65", "qcom,kpss-wdt"; + reg = <0x17817000 0x1000>; + clocks = <&sleep_clk>; + }; + timer@17820000 { #address-cells = <1>; #size-cells = <1>; @@ -399,6 +663,11 @@ }; }; }; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + }; }; diff --git a/dts/src/arm/r7s9210-rza2mevb.dts b/dts/src/arm/r7s9210-rza2mevb.dts index 9c0d9686fe..69a5a44b8a 100644 --- a/dts/src/arm/r7s9210-rza2mevb.dts +++ b/dts/src/arm/r7s9210-rza2mevb.dts @@ -71,10 +71,10 @@ leds { compatible = "gpio-leds"; - red { + led-red { gpios = <&pinctrl RZA2_PIN(PORT6, 0) GPIO_ACTIVE_HIGH>; }; - green { + led-green { gpios = <&pinctrl RZA2_PIN(PORTC, 1) GPIO_ACTIVE_HIGH>; }; }; diff --git a/dts/src/arm/r8a7790-lager.dts b/dts/src/arm/r8a7790-lager.dts index 57cd2fa722..5ad5349a50 100644 --- a/dts/src/arm/r8a7790-lager.dts +++ b/dts/src/arm/r8a7790-lager.dts @@ -442,7 +442,7 @@ compatible = "dlg,da9063-rtc"; }; - wdt { + watchdog { compatible = "dlg,da9063-watchdog"; }; }; diff --git a/dts/src/arm/r8a7790-stout.dts b/dts/src/arm/r8a7790-stout.dts index c802f9f13c..fe14727eef 100644 --- a/dts/src/arm/r8a7790-stout.dts +++ b/dts/src/arm/r8a7790-stout.dts @@ -341,7 +341,7 @@ compatible = "dlg,da9063-rtc"; }; - wdt { + watchdog { compatible = "dlg,da9063-watchdog"; }; }; diff --git a/dts/src/arm/r8a7791-koelsch.dts b/dts/src/arm/r8a7791-koelsch.dts index 6e691b6cac..26a40782cc 100644 --- a/dts/src/arm/r8a7791-koelsch.dts +++ b/dts/src/arm/r8a7791-koelsch.dts @@ -805,7 +805,7 @@ compatible = "dlg,da9063-rtc"; }; - wdt { + watchdog { compatible = "dlg,da9063-watchdog"; }; }; diff --git a/dts/src/arm/r8a7791-porter.dts b/dts/src/arm/r8a7791-porter.dts index 38e2ab9287..ec0a20d513 100644 --- a/dts/src/arm/r8a7791-porter.dts +++ b/dts/src/arm/r8a7791-porter.dts @@ -390,7 +390,7 @@ interrupts = <2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; - wdt { + watchdog { compatible = "dlg,da9063-watchdog"; }; }; diff --git a/dts/src/arm/r8a7792-blanche.dts b/dts/src/arm/r8a7792-blanche.dts index 62aa9f6132..c66de9dd12 100644 --- a/dts/src/arm/r8a7792-blanche.dts +++ b/dts/src/arm/r8a7792-blanche.dts @@ -335,7 +335,7 @@ compatible = "dlg,da9063-rtc"; }; - wdt { + watchdog { compatible = "dlg,da9063-watchdog"; }; }; diff --git a/dts/src/arm/r8a7793-gose.dts b/dts/src/arm/r8a7793-gose.dts index c8978f4f62..79b537b246 100644 --- a/dts/src/arm/r8a7793-gose.dts +++ b/dts/src/arm/r8a7793-gose.dts @@ -740,7 +740,7 @@ compatible = "dlg,da9063-rtc"; }; - wdt { + watchdog { compatible = "dlg,da9063-watchdog"; }; }; diff --git a/dts/src/arm/r8a7794-alt.dts b/dts/src/arm/r8a7794-alt.dts index 99d554fe33..4d93319674 100644 --- a/dts/src/arm/r8a7794-alt.dts +++ b/dts/src/arm/r8a7794-alt.dts @@ -463,7 +463,7 @@ compatible = "dlg,da9063-rtc"; }; - wdt { + watchdog { compatible = "dlg,da9063-watchdog"; }; }; diff --git a/dts/src/arm/r8a7794-silk.dts b/dts/src/arm/r8a7794-silk.dts index 92a7616443..b7af1befa1 100644 --- a/dts/src/arm/r8a7794-silk.dts +++ b/dts/src/arm/r8a7794-silk.dts @@ -433,7 +433,7 @@ compatible = "dlg,da9063-rtc"; }; - wdt { + watchdog { compatible = "dlg,da9063-watchdog"; }; }; diff --git a/dts/src/arm/r8a77xx-aa104xd12-panel.dtsi b/dts/src/arm/r8a77xx-aa104xd12-panel.dtsi deleted file mode 100644 index 79fce67ebb..0000000000 --- a/dts/src/arm/r8a77xx-aa104xd12-panel.dtsi +++ /dev/null @@ -1,39 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Common file for the AA104XD12 panel connected to Renesas R-Car boards - * - * Copyright (C) 2014 Renesas Electronics Corp. - */ - -/ { - panel { - compatible = "mitsubishi,aa104xd12", "panel-lvds"; - - width-mm = <210>; - height-mm = <158>; - data-mapping = "jeida-18"; - - panel-timing { - /* 1024x768 @65Hz */ - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hsync-len = <136>; - hfront-porch = <20>; - hback-porch = <160>; - vfront-porch = <3>; - vback-porch = <29>; - vsync-len = <6>; - }; - - port { - panel_in: endpoint { - remote-endpoint = <&lvds_connector>; - }; - }; - }; -}; - -&lvds_connector { - remote-endpoint = <&panel_in>; -}; diff --git a/dts/src/arm/r9a06g032-rzn1d400-db.dts b/dts/src/arm/r9a06g032-rzn1d400-db.dts index 3f8f3ce87e..4bf813335e 100644 --- a/dts/src/arm/r9a06g032-rzn1d400-db.dts +++ b/dts/src/arm/r9a06g032-rzn1d400-db.dts @@ -8,6 +8,9 @@ /dts-v1/; +#include <dt-bindings/pinctrl/rzn1-pinctrl.h> +#include <dt-bindings/net/pcs-rzn1-miic.h> + #include "r9a06g032.dtsi" / { @@ -23,6 +26,122 @@ }; }; +ð_miic { + status = "okay"; + renesas,miic-switch-portin = <MIIC_GMAC2_PORT>; +}; + +&gmac2 { + status = "okay"; + phy-mode = "gmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&mii_conv4 { + renesas,miic-input = <MIIC_SWITCH_PORTB>; + status = "okay"; +}; + +&mii_conv5 { + renesas,miic-input = <MIIC_SWITCH_PORTA>; + status = "okay"; +}; + +&pinctrl{ + pins_eth3: pins_eth3 { + pinmux = <RZN1_PINMUX(36, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>, + <RZN1_PINMUX(37, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>, + <RZN1_PINMUX(38, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>, + <RZN1_PINMUX(39, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>, + <RZN1_PINMUX(40, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>, + <RZN1_PINMUX(41, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>, + <RZN1_PINMUX(42, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>, + <RZN1_PINMUX(43, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>, + <RZN1_PINMUX(44, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>, + <RZN1_PINMUX(45, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>, + <RZN1_PINMUX(46, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>, + <RZN1_PINMUX(47, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>; + drive-strength = <6>; + bias-disable; + }; + + pins_eth4: pins_eth4 { + pinmux = <RZN1_PINMUX(48, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>, + <RZN1_PINMUX(49, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>, + <RZN1_PINMUX(50, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>, + <RZN1_PINMUX(51, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>, + <RZN1_PINMUX(52, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>, + <RZN1_PINMUX(53, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>, + <RZN1_PINMUX(54, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>, + <RZN1_PINMUX(55, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>, + <RZN1_PINMUX(56, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>, + <RZN1_PINMUX(57, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>, + <RZN1_PINMUX(58, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>, + <RZN1_PINMUX(59, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>; + drive-strength = <6>; + bias-disable; + }; + + pins_mdio1: pins_mdio1 { + pinmux = <RZN1_PINMUX(152, RZN1_FUNC_MDIO1_SWITCH)>, + <RZN1_PINMUX(153, RZN1_FUNC_MDIO1_SWITCH)>; + }; +}; + +&rtc0 { + status = "okay"; +}; + +&switch { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_eth3>, <&pins_eth4>, <&pins_mdio1>; + + dsa,member = <0 0>; + + mdio { + clock-frequency = <2500000>; + + #address-cells = <1>; + #size-cells = <0>; + + switch0phy4: ethernet-phy@4 { + reg = <4>; + micrel,led-mode = <1>; + }; + + switch0phy5: ethernet-phy@5 { + reg = <5>; + micrel,led-mode = <1>; + }; + }; +}; + +&switch_port0 { + label = "lan0"; + phy-mode = "mii"; + phy-handle = <&switch0phy5>; + status = "okay"; +}; + +&switch_port1 { + label = "lan1"; + phy-mode = "mii"; + phy-handle = <&switch0phy4>; + status = "okay"; +}; + +&switch_port4 { + status = "okay"; +}; + &uart0 { status = "okay"; }; diff --git a/dts/src/arm/r9a06g032.dtsi b/dts/src/arm/r9a06g032.dtsi index d366591095..5b97fa8547 100644 --- a/dts/src/arm/r9a06g032.dtsi +++ b/dts/src/arm/r9a06g032.dtsi @@ -304,6 +304,114 @@ data-width = <8>; }; + gmac2: ethernet@44002000 { + compatible = "renesas,r9a06g032-gmac", "renesas,rzn1-gmac", "snps,dwmac"; + reg = <0x44002000 0x2000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_wake_irq", "eth_lpi"; + clocks = <&sysctrl R9A06G032_HCLK_GMAC1>; + clock-names = "stmmaceth"; + power-domains = <&sysctrl>; + snps,multicast-filter-bins = <256>; + snps,perfect-filter-entries = <128>; + tx-fifo-depth = <2048>; + rx-fifo-depth = <4096>; + status = "disabled"; + }; + + eth_miic: eth-miic@44030000 { + compatible = "renesas,r9a06g032-miic", "renesas,rzn1-miic"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x44030000 0x10000>; + clocks = <&sysctrl R9A06G032_CLK_MII_REF>, + <&sysctrl R9A06G032_CLK_RGMII_REF>, + <&sysctrl R9A06G032_CLK_RMII_REF>, + <&sysctrl R9A06G032_HCLK_SWITCH_RG>; + clock-names = "mii_ref", "rgmii_ref", "rmii_ref", "hclk"; + power-domains = <&sysctrl>; + status = "disabled"; + + mii_conv1: mii-conv@1 { + reg = <1>; + status = "disabled"; + }; + + mii_conv2: mii-conv@2 { + reg = <2>; + status = "disabled"; + }; + + mii_conv3: mii-conv@3 { + reg = <3>; + status = "disabled"; + }; + + mii_conv4: mii-conv@4 { + reg = <4>; + status = "disabled"; + }; + + mii_conv5: mii-conv@5 { + reg = <5>; + status = "disabled"; + }; + }; + + switch: switch@44050000 { + compatible = "renesas,r9a06g032-a5psw", "renesas,rzn1-a5psw"; + reg = <0x44050000 0x10000>; + clocks = <&sysctrl R9A06G032_HCLK_SWITCH>, + <&sysctrl R9A06G032_CLK_SWITCH>; + clock-names = "hclk", "clk"; + power-domains = <&sysctrl>; + status = "disabled"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + switch_port0: port@0 { + reg = <0>; + pcs-handle = <&mii_conv5>; + status = "disabled"; + }; + + switch_port1: port@1 { + reg = <1>; + pcs-handle = <&mii_conv4>; + status = "disabled"; + }; + + switch_port2: port@2 { + reg = <2>; + pcs-handle = <&mii_conv3>; + status = "disabled"; + }; + + switch_port3: port@3 { + reg = <3>; + pcs-handle = <&mii_conv2>; + status = "disabled"; + }; + + switch_port4: port@4 { + reg = <4>; + ethernet = <&gmac2>; + label = "cpu"; + phy-mode = "internal"; + status = "disabled"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + gic: interrupt-controller@44101000 { compatible = "arm,gic-400", "arm,cortex-a7-gic"; interrupt-controller; diff --git a/dts/src/arm/rk3066a-bqcurie2.dts b/dts/src/arm/rk3066a-bqcurie2.dts index 390aa33cd5..962b4d1291 100644 --- a/dts/src/arm/rk3066a-bqcurie2.dts +++ b/dts/src/arm/rk3066a-bqcurie2.dts @@ -48,7 +48,7 @@ compatible = "gpio-keys"; autorepeat; - power { + key-power { gpios = <&gpio6 RK_PA2 GPIO_ACTIVE_LOW>; /* GPIO6_A2 */ linux,code = <KEY_POWER>; label = "GPIO Key Power"; @@ -56,7 +56,7 @@ wakeup-source; debounce-interval = <100>; }; - volume-down { + key-volume-down { gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_LOW>; /* GPIO4_C5 */ linux,code = <KEY_VOLUMEDOWN>; label = "GPIO Key Vol-"; diff --git a/dts/src/arm/rk3066a-mk808.dts b/dts/src/arm/rk3066a-mk808.dts index 667d57a4ff..cfa318a506 100644 --- a/dts/src/arm/rk3066a-mk808.dts +++ b/dts/src/arm/rk3066a-mk808.dts @@ -160,6 +160,24 @@ status = "okay"; }; +&nfc { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + nand@0 { + reg = <0>; + label = "rk-nand"; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-ecc-step-size = <1024>; + nand-ecc-strength = <40>; + nand-is-boot-medium; + rockchip,boot-blks = <8>; + rockchip,boot-ecc-strength = <24>; + }; +}; + &pinctrl { usb-host { host_drv: host-drv { diff --git a/dts/src/arm/rk3066a-rayeager.dts b/dts/src/arm/rk3066a-rayeager.dts index 12b2e59aeb..dbbc517009 100644 --- a/dts/src/arm/rk3066a-rayeager.dts +++ b/dts/src/arm/rk3066a-rayeager.dts @@ -32,7 +32,7 @@ keys: gpio-keys { compatible = "gpio-keys"; - power { + key-power { wakeup-source; gpios = <&gpio6 RK_PA2 GPIO_ACTIVE_LOW>; label = "GPIO Power"; diff --git a/dts/src/arm/rk3188-bqedison2qc.dts b/dts/src/arm/rk3188-bqedison2qc.dts index 35b7a5798e..9312be362a 100644 --- a/dts/src/arm/rk3188-bqedison2qc.dts +++ b/dts/src/arm/rk3188-bqedison2qc.dts @@ -37,7 +37,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pwr_key &usb_int>; - power { + key-power { gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; label = "GPIO Key Power"; @@ -46,7 +46,7 @@ wakeup-source; }; - wake_on_usb: wake-on-usb { + wake_on_usb: key-wake-on-usb { label = "Wake-on-USB"; gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; linux,code = <KEY_WAKEUP>; diff --git a/dts/src/arm/rk3188-px3-evb.dts b/dts/src/arm/rk3188-px3-evb.dts index fc478ac4e7..0a1ae689b1 100644 --- a/dts/src/arm/rk3188-px3-evb.dts +++ b/dts/src/arm/rk3188-px3-evb.dts @@ -29,7 +29,7 @@ compatible = "gpio-keys"; autorepeat; - power { + key-power { gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; label = "GPIO Key Power"; diff --git a/dts/src/arm/rk3188-radxarock.dts b/dts/src/arm/rk3188-radxarock.dts index 36c0945f43..a9ed3cd2c2 100644 --- a/dts/src/arm/rk3188-radxarock.dts +++ b/dts/src/arm/rk3188-radxarock.dts @@ -24,7 +24,7 @@ compatible = "gpio-keys"; autorepeat; - power { + key-power { gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; label = "GPIO Key Power"; diff --git a/dts/src/arm/rk3229-evb.dts b/dts/src/arm/rk3229-evb.dts index 797476e8be..5c3d08e3ee 100644 --- a/dts/src/arm/rk3229-evb.dts +++ b/dts/src/arm/rk3229-evb.dts @@ -107,7 +107,7 @@ regulator-boot-on; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; autorepeat; pinctrl-names = "default"; diff --git a/dts/src/arm/rk3288-evb.dtsi b/dts/src/arm/rk3288-evb.dtsi index c4ca73b40d..399d6b9c5f 100644 --- a/dts/src/arm/rk3288-evb.dtsi +++ b/dts/src/arm/rk3288-evb.dtsi @@ -118,7 +118,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pwrbtn>; - power { + key-power { gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; label = "GPIO Key Power"; diff --git a/dts/src/arm/rk3288-firefly-reload.dts b/dts/src/arm/rk3288-firefly-reload.dts index 9a4a9749c4..a5a0826341 100644 --- a/dts/src/arm/rk3288-firefly-reload.dts +++ b/dts/src/arm/rk3288-firefly-reload.dts @@ -27,7 +27,7 @@ gpio-keys { compatible = "gpio-keys"; - power { + key-power { wakeup-source; gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; label = "GPIO Power"; diff --git a/dts/src/arm/rk3288-firefly.dtsi b/dts/src/arm/rk3288-firefly.dtsi index 7fb582302b..052afe5543 100644 --- a/dts/src/arm/rk3288-firefly.dtsi +++ b/dts/src/arm/rk3288-firefly.dtsi @@ -49,7 +49,7 @@ keys: gpio-keys { compatible = "gpio-keys"; - power { + key-power { wakeup-source; gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; label = "GPIO Power"; diff --git a/dts/src/arm/rk3288-phycore-rdk.dts b/dts/src/arm/rk3288-phycore-rdk.dts index 1e33859de4..1a51569514 100644 --- a/dts/src/arm/rk3288-phycore-rdk.dts +++ b/dts/src/arm/rk3288-phycore-rdk.dts @@ -20,14 +20,14 @@ pinctrl-names = "default"; pinctrl-0 = <&user_button_pins>; - button@0 { + button-0 { label = "home"; linux,code = <KEY_HOME>; gpios = <&gpio8 0 GPIO_ACTIVE_HIGH>; wakeup-source; }; - button@1 { + button-1 { label = "menu"; linux,code = <KEY_MENU>; gpios = <&gpio8 3 GPIO_ACTIVE_HIGH>; diff --git a/dts/src/arm/rk3288-popmetal.dts b/dts/src/arm/rk3288-popmetal.dts index 8c7376d64b..fd90f3b8fc 100644 --- a/dts/src/arm/rk3288-popmetal.dts +++ b/dts/src/arm/rk3288-popmetal.dts @@ -30,7 +30,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pwrbtn>; - power { + key-power { gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; label = "GPIO Key Power"; diff --git a/dts/src/arm/rk3288-r89.dts b/dts/src/arm/rk3288-r89.dts index 55467bc30f..633e5a0324 100644 --- a/dts/src/arm/rk3288-r89.dts +++ b/dts/src/arm/rk3288-r89.dts @@ -31,7 +31,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pwrbtn>; - power { + key-power { gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; label = "GPIO Key Power"; diff --git a/dts/src/arm/rk3288-rock2-square.dts b/dts/src/arm/rk3288-rock2-square.dts index c4d1d142d8..80e0f07c8e 100644 --- a/dts/src/arm/rk3288-rock2-square.dts +++ b/dts/src/arm/rk3288-rock2-square.dts @@ -28,7 +28,7 @@ gpio-keys { compatible = "gpio-keys"; - power { + key-power { gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; label = "GPIO Power"; linux,code = <KEY_POWER>; diff --git a/dts/src/arm/rk3288-tinker.dtsi b/dts/src/arm/rk3288-tinker.dtsi index 9c1e38c54e..09618bb7d8 100644 --- a/dts/src/arm/rk3288-tinker.dtsi +++ b/dts/src/arm/rk3288-tinker.dtsi @@ -26,14 +26,12 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; pinctrl-names = "default"; pinctrl-0 = <&pwrbtn>; - button@0 { + button { gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; label = "GPIO Key Power"; diff --git a/dts/src/arm/rk3288-veyron-broadcom-bluetooth.dtsi b/dts/src/arm/rk3288-veyron-broadcom-bluetooth.dtsi index a10d25ac8f..f9dde0eef5 100644 --- a/dts/src/arm/rk3288-veyron-broadcom-bluetooth.dtsi +++ b/dts/src/arm/rk3288-veyron-broadcom-bluetooth.dtsi @@ -13,10 +13,10 @@ <&bt_dev_wake>; compatible = "brcm,bcm43540-bt"; - host-wakeup-gpios = <&gpio4 RK_PD7 GPIO_ACTIVE_HIGH>; - shutdown-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>; - device-wakeup-gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; - max-speed = <3000000>; - brcm,bt-pcm-int-params = [01 02 00 01 01]; + host-wakeup-gpios = <&gpio4 RK_PD7 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; + max-speed = <3000000>; + brcm,bt-pcm-int-params = [01 02 00 01 01]; }; }; diff --git a/dts/src/arm/rk3288-veyron-chromebook.dtsi b/dts/src/arm/rk3288-veyron-chromebook.dtsi index 05112c2517..700bb548d6 100644 --- a/dts/src/arm/rk3288-veyron-chromebook.dtsi +++ b/dts/src/arm/rk3288-veyron-chromebook.dtsi @@ -32,7 +32,7 @@ pinctrl-names = "default"; pinctrl-0 = <&ap_lid_int_l>; - lid { + switch-lid { label = "Lid"; gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>; wakeup-source; diff --git a/dts/src/arm/rk3288-veyron-minnie.dts b/dts/src/arm/rk3288-veyron-minnie.dts index 82fc6fba99..dcdcc55c40 100644 --- a/dts/src/arm/rk3288-veyron-minnie.dts +++ b/dts/src/arm/rk3288-veyron-minnie.dts @@ -21,14 +21,14 @@ pinctrl-names = "default"; pinctrl-0 = <&volum_down_l &volum_up_l>; - volum_down { + key-volum-down { label = "Volum_down"; gpios = <&gpio5 RK_PB3 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; debounce-interval = <100>; }; - volum_up { + key-volum-up { label = "Volum_up"; gpios = <&gpio5 RK_PB2 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; diff --git a/dts/src/arm/rk3288-veyron-pinky.dts b/dts/src/arm/rk3288-veyron-pinky.dts index 4e9fdb0f72..e2a4e6232e 100644 --- a/dts/src/arm/rk3288-veyron-pinky.dts +++ b/dts/src/arm/rk3288-veyron-pinky.dts @@ -45,7 +45,7 @@ &lid_switch { pinctrl-0 = <&pwr_key_h &ap_lid_int_l>; - power { + key-power { gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; }; }; diff --git a/dts/src/arm/rk3288-veyron.dtsi b/dts/src/arm/rk3288-veyron.dtsi index 54a6838d73..e406c8c7c7 100644 --- a/dts/src/arm/rk3288-veyron.dtsi +++ b/dts/src/arm/rk3288-veyron.dtsi @@ -29,7 +29,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pwr_key_l>; - power { + key-power { label = "Power"; gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; diff --git a/dts/src/arm/rv1108-elgin-r1.dts b/dts/src/arm/rv1108-elgin-r1.dts index 0c99a5934e..2d9994379e 100644 --- a/dts/src/arm/rv1108-elgin-r1.dts +++ b/dts/src/arm/rv1108-elgin-r1.dts @@ -83,7 +83,7 @@ regulators { vdd_core: DCDC_REG1 { - regulator-name= "vdd_core"; + regulator-name = "vdd_core"; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1500000>; regulator-always-on; @@ -95,7 +95,7 @@ }; vdd_buck2: DCDC_REG2 { - regulator-name= "vdd_buck2"; + regulator-name = "vdd_buck2"; regulator-min-microvolt = <2200000>; regulator-max-microvolt = <2200000>; regulator-always-on; @@ -106,7 +106,7 @@ }; vcc_ddr: DCDC_REG3 { - regulator-name= "vcc_ddr"; + regulator-name = "vcc_ddr"; regulator-always-on; regulator-boot-on; regulator-state-mem { @@ -115,7 +115,7 @@ }; vcc_io: DCDC_REG4 { - regulator-name= "vcc_io"; + regulator-name = "vcc_io"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; @@ -127,7 +127,7 @@ }; vdd_10: LDO_REG1 { - regulator-name= "vdd_10"; + regulator-name = "vdd_10"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; @@ -138,7 +138,7 @@ }; vcc_18: LDO_REG2 { - regulator-name= "vcc_18"; + regulator-name = "vcc_18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; @@ -149,7 +149,7 @@ }; vdd10_pmu: LDO_REG3 { - regulator-name= "vdd10_pmu"; + regulator-name = "vdd10_pmu"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; diff --git a/dts/src/arm/rv1108-evb.dts b/dts/src/arm/rv1108-evb.dts index 46cad7cb94..ef150f4ee9 100644 --- a/dts/src/arm/rv1108-evb.dts +++ b/dts/src/arm/rv1108-evb.dts @@ -96,7 +96,7 @@ regulators { vdd_core: DCDC_REG1 { - regulator-name= "vdd_core"; + regulator-name = "vdd_core"; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1500000>; regulator-always-on; @@ -108,7 +108,7 @@ }; vdd_cam: DCDC_REG2 { - regulator-name= "vdd_cam"; + regulator-name = "vdd_cam"; regulator-min-microvolt = <700000>; regulator-max-microvolt = <2000000>; regulator-state-mem { @@ -117,7 +117,7 @@ }; vcc_ddr: DCDC_REG3 { - regulator-name= "vcc_ddr"; + regulator-name = "vcc_ddr"; regulator-always-on; regulator-boot-on; regulator-state-mem { @@ -126,7 +126,7 @@ }; vcc_io: DCDC_REG4 { - regulator-name= "vcc_io"; + regulator-name = "vcc_io"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; @@ -138,7 +138,7 @@ }; vdd_10: LDO_REG1 { - regulator-name= "vdd_10"; + regulator-name = "vdd_10"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; @@ -149,7 +149,7 @@ }; vcc_18: LDO_REG2 { - regulator-name= "vcc_18"; + regulator-name = "vcc_18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; @@ -160,7 +160,7 @@ }; vdd10_pmu: LDO_REG3 { - regulator-name= "vdd10_pmu"; + regulator-name = "vdd10_pmu"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; diff --git a/dts/src/arm/rv1108.dtsi b/dts/src/arm/rv1108.dtsi index c158a7ea86..abf3006f0a 100644 --- a/dts/src/arm/rv1108.dtsi +++ b/dts/src/arm/rv1108.dtsi @@ -748,7 +748,7 @@ gmac { rmii_pins: rmii-pins { - rockchip,pins = <1 RK_PC5 2 &pcfg_pull_none>, + rockchip,pins = <1 RK_PC5 2 &pcfg_pull_none>, <1 RK_PC3 2 &pcfg_pull_none>, <1 RK_PC4 2 &pcfg_pull_none>, <1 RK_PB2 3 &pcfg_pull_none_drv_12ma>, diff --git a/dts/src/arm/s3c2410-pinctrl.h b/dts/src/arm/s3c2410-pinctrl.h new file mode 100644 index 0000000000..76b6171ae1 --- /dev/null +++ b/dts/src/arm/s3c2410-pinctrl.h @@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Samsung S3C2410 DTS pinctrl constants + * + * Copyright (c) 2016 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Copyright (c) 2022 Linaro Ltd + * Author: Krzysztof Kozlowski <krzk@kernel.org> + */ + +#ifndef __DTS_ARM_SAMSUNG_S3C2410_PINCTRL_H__ +#define __DTS_ARM_SAMSUNG_S3C2410_PINCTRL_H__ + +#define S3C2410_PIN_FUNC_INPUT 0 +#define S3C2410_PIN_FUNC_OUTPUT 1 +#define S3C2410_PIN_FUNC_2 2 +#define S3C2410_PIN_FUNC_3 3 + +#endif /* __DTS_ARM_SAMSUNG_S3C2410_PINCTRL_H__ */ diff --git a/dts/src/arm/s3c2416-pinctrl.dtsi b/dts/src/arm/s3c2416-pinctrl.dtsi index 20a7d72827..3268366bd8 100644 --- a/dts/src/arm/s3c2416-pinctrl.dtsi +++ b/dts/src/arm/s3c2416-pinctrl.dtsi @@ -5,7 +5,7 @@ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> */ -#include <dt-bindings/pinctrl/samsung.h> +#include "s3c2410-pinctrl.h" &pinctrl_0 { /* @@ -82,91 +82,91 @@ uart0_data: uart0-data-pins { samsung,pins = "gph-0", "gph-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C2410_PIN_FUNC_2>; }; uart0_fctl: uart0-fctl-pins { samsung,pins = "gph-8", "gph-9"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C2410_PIN_FUNC_2>; }; uart1_data: uart1-data-pins { samsung,pins = "gph-2", "gph-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C2410_PIN_FUNC_2>; }; uart1_fctl: uart1-fctl-pins { samsung,pins = "gph-10", "gph-11"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C2410_PIN_FUNC_2>; }; uart2_data: uart2-data-pins { samsung,pins = "gph-4", "gph-5"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C2410_PIN_FUNC_2>; }; uart2_fctl: uart2-fctl-pins { samsung,pins = "gph-6", "gph-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C2410_PIN_FUNC_2>; }; uart3_data: uart3-data-pins { samsung,pins = "gph-6", "gph-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C2410_PIN_FUNC_2>; }; extuart_clk: extuart-clk-pins { samsung,pins = "gph-12"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C2410_PIN_FUNC_2>; }; i2c0_bus: i2c0-bus-pins { samsung,pins = "gpe-14", "gpe-15"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C2410_PIN_FUNC_2>; }; spi0_bus: spi0-bus-pins { samsung,pins = "gpe-11", "gpe-12", "gpe-13"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C2410_PIN_FUNC_2>; }; sd0_clk: sd0-clk-pins { samsung,pins = "gpe-5"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C2410_PIN_FUNC_2>; }; sd0_cmd: sd0-cmd-pins { samsung,pins = "gpe-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C2410_PIN_FUNC_2>; }; sd0_bus1: sd0-bus1-pins { samsung,pins = "gpe-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C2410_PIN_FUNC_2>; }; sd0_bus4: sd0-bus4-pins { samsung,pins = "gpe-8", "gpe-9", "gpe-10"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C2410_PIN_FUNC_2>; }; sd1_cmd: sd1-cmd-pins { samsung,pins = "gpl-8"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C2410_PIN_FUNC_2>; }; sd1_clk: sd1-clk-pins { samsung,pins = "gpl-9"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C2410_PIN_FUNC_2>; }; sd1_bus1: sd1-bus1-pins { samsung,pins = "gpl-0"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C2410_PIN_FUNC_2>; }; sd1_bus4: sd1-bus4-pins { samsung,pins = "gpl-1", "gpl-2", "gpl-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C2410_PIN_FUNC_2>; }; }; diff --git a/dts/src/arm/s3c2416.dtsi b/dts/src/arm/s3c2416.dtsi index 4f084f4fe4..4660751cb2 100644 --- a/dts/src/arm/s3c2416.dtsi +++ b/dts/src/arm/s3c2416.dtsi @@ -45,7 +45,7 @@ status = "disabled"; }; - sdhci_1: sdhci@4ac00000 { + sdhci_1: mmc@4ac00000 { compatible = "samsung,s3c6410-sdhci"; reg = <0x4AC00000 0x100>; interrupts = <0 0 21 3>; @@ -56,7 +56,7 @@ status = "disabled"; }; - sdhci_0: sdhci@4a800000 { + sdhci_0: mmc@4a800000 { compatible = "samsung,s3c6410-sdhci"; reg = <0x4A800000 0x100>; interrupts = <0 0 20 3>; diff --git a/dts/src/arm/s3c64xx-pinctrl.dtsi b/dts/src/arm/s3c64xx-pinctrl.dtsi index 0a3186d57c..f53959b7d0 100644 --- a/dts/src/arm/s3c64xx-pinctrl.dtsi +++ b/dts/src/arm/s3c64xx-pinctrl.dtsi @@ -9,7 +9,7 @@ * listed as device tree nodes in this file. */ -#include <dt-bindings/pinctrl/samsung.h> +#include "s3c64xx-pinctrl.h" &pinctrl0 { /* @@ -133,219 +133,219 @@ uart0_data: uart0-data-pins { samsung,pins = "gpa-0", "gpa-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C64XX_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; uart0_fctl: uart0-fctl-pins { samsung,pins = "gpa-2", "gpa-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C64XX_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; uart1_data: uart1-data-pins { samsung,pins = "gpa-4", "gpa-5"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C64XX_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; uart1_fctl: uart1-fctl-pins { samsung,pins = "gpa-6", "gpa-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C64XX_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; uart2_data: uart2-data-pins { samsung,pins = "gpb-0", "gpb-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C64XX_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; uart3_data: uart3-data-pins { samsung,pins = "gpb-2", "gpb-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C64XX_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; ext_dma_0: ext-dma-0-pins { samsung,pins = "gpb-0", "gpb-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-function = <S3C64XX_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; ext_dma_1: ext-dma-1-pins { samsung,pins = "gpb-2", "gpb-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-function = <S3C64XX_PIN_FUNC_4>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; irda_data_0: irda-data-0-pins { samsung,pins = "gpb-0", "gpb-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-function = <S3C64XX_PIN_FUNC_4>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; irda_data_1: irda-data-1-pins { samsung,pins = "gpb-2", "gpb-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-function = <S3C64XX_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; irda_sdbw: irda-sdbw-pins { samsung,pins = "gpb-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C64XX_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; i2c0_bus: i2c0-bus-pins { samsung,pins = "gpb-5", "gpb-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C64XX_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_UP>; }; i2c1_bus: i2c1-bus-pins { /* S3C6410-only */ samsung,pins = "gpb-2", "gpb-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_6>; + samsung,pin-function = <S3C64XX_PIN_FUNC_6>; samsung,pin-pud = <S3C64XX_PIN_PULL_UP>; }; spi0_bus: spi0-bus-pins { samsung,pins = "gpc-0", "gpc-1", "gpc-2"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C64XX_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_UP>; }; spi0_cs: spi0-cs-pins { samsung,pins = "gpc-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C64XX_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; spi1_bus: spi1-bus-pins { samsung,pins = "gpc-4", "gpc-5", "gpc-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C64XX_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_UP>; }; spi1_cs: spi1-cs-pins { samsung,pins = "gpc-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C64XX_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; sd0_cmd: sd0-cmd-pins { samsung,pins = "gpg-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C64XX_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; sd0_clk: sd0-clk-pins { samsung,pins = "gpg-0"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C64XX_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; sd0_bus1: sd0-bus1-pins { samsung,pins = "gpg-2"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C64XX_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; sd0_bus4: sd0-bus4-pins { samsung,pins = "gpg-2", "gpg-3", "gpg-4", "gpg-5"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C64XX_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; sd0_cd: sd0-cd-pins { samsung,pins = "gpg-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C64XX_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_UP>; }; sd1_cmd: sd1-cmd-pins { samsung,pins = "gph-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C64XX_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; sd1_clk: sd1-clk-pins { samsung,pins = "gph-0"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C64XX_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; sd1_bus1: sd1-bus1-pins { samsung,pins = "gph-2"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C64XX_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; sd1_bus4: sd1-bus4-pins { samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C64XX_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; sd1_bus8: sd1-bus8-pins { samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5", "gph-6", "gph-7", "gph-8", "gph-9"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C64XX_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; sd1_cd: sd1-cd-pins { samsung,pins = "gpg-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-function = <S3C64XX_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_UP>; }; sd2_cmd: sd2-cmd-pins { samsung,pins = "gpc-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-function = <S3C64XX_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; sd2_clk: sd2-clk-pins { samsung,pins = "gpc-5"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-function = <S3C64XX_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; sd2_bus1: sd2-bus1-pins { samsung,pins = "gph-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-function = <S3C64XX_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; sd2_bus4: sd2-bus4-pins { samsung,pins = "gph-6", "gph-7", "gph-8", "gph-9"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-function = <S3C64XX_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; i2s0_bus: i2s0-bus-pins { samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-function = <S3C64XX_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; i2s0_cdclk: i2s0-cdclk-pins { samsung,pins = "gpd-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-function = <S3C64XX_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; i2s1_bus: i2s1-bus-pins { samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-function = <S3C64XX_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; i2s1_cdclk: i2s1-cdclk-pins { samsung,pins = "gpe-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-function = <S3C64XX_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; @@ -353,50 +353,50 @@ /* S3C6410-only */ samsung,pins = "gpc-4", "gpc-5", "gpc-6", "gph-6", "gph-8", "gph-9"; - samsung,pin-function = <EXYNOS_PIN_FUNC_5>; + samsung,pin-function = <S3C64XX_PIN_FUNC_5>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; i2s2_cdclk: i2s2-cdclk-pins { /* S3C6410-only */ samsung,pins = "gph-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_5>; + samsung,pin-function = <S3C64XX_PIN_FUNC_5>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; pcm0_bus: pcm0-bus-pins { samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C64XX_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; pcm0_extclk: pcm0-extclk-pins { samsung,pins = "gpd-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C64XX_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; pcm1_bus: pcm1-bus-pins { samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C64XX_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; pcm1_extclk: pcm1-extclk-pins { samsung,pins = "gpe-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C64XX_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; ac97_bus_0: ac97-bus-0-pins { samsung,pins = "gpd-0", "gpd-1", "gpd-2", "gpd-3", "gpd-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-function = <S3C64XX_PIN_FUNC_4>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; ac97_bus_1: ac97-bus-1-pins { samsung,pins = "gpe-0", "gpe-1", "gpe-2", "gpe-3", "gpe-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-function = <S3C64XX_PIN_FUNC_4>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; @@ -404,242 +404,242 @@ samsung,pins = "gpf-0", "gpf-1", "gpf-2", "gpf-4", "gpf-5", "gpf-6", "gpf-7", "gpf-8", "gpf-9", "gpf-10", "gpf-11", "gpf-12"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C64XX_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; cam_rst: cam-rst-pins { samsung,pins = "gpf-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C64XX_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; cam_field: cam-field-pins { /* S3C6410-only */ samsung,pins = "gpb-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-function = <S3C64XX_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; pwm_extclk: pwm-extclk-pins { samsung,pins = "gpf-13"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C64XX_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; pwm0_out: pwm0-out-pins { samsung,pins = "gpf-14"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C64XX_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; pwm1_out: pwm1-out-pins { samsung,pins = "gpf-15"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C64XX_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; clkout0: clkout-0-pins { samsung,pins = "gpf-14"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-function = <S3C64XX_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; keypad_col0_0: keypad-col0-0-pins { samsung,pins = "gph-0"; - samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-function = <S3C64XX_PIN_FUNC_4>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; keypad_col1_0: keypad-col1-0-pins { samsung,pins = "gph-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-function = <S3C64XX_PIN_FUNC_4>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; keypad_col2_0: keypad-col2-0-pins { samsung,pins = "gph-2"; - samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-function = <S3C64XX_PIN_FUNC_4>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; keypad_col3_0: keypad-col3-0-pins { samsung,pins = "gph-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-function = <S3C64XX_PIN_FUNC_4>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; keypad_col4_0: keypad-col4-0-pins { samsung,pins = "gph-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-function = <S3C64XX_PIN_FUNC_4>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; keypad_col5_0: keypad-col5-0-pins { samsung,pins = "gph-5"; - samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-function = <S3C64XX_PIN_FUNC_4>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; keypad_col6_0: keypad-col6-0-pins { samsung,pins = "gph-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-function = <S3C64XX_PIN_FUNC_4>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; keypad_col7_0: keypad-col7-0-pins { samsung,pins = "gph-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-function = <S3C64XX_PIN_FUNC_4>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; keypad_col0_1: keypad-col0-1-pins { samsung,pins = "gpl-0"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-function = <S3C64XX_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; keypad_col1_1: keypad-col1-1-pins { samsung,pins = "gpl-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-function = <S3C64XX_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; keypad_col2_1: keypad-col2-1-pins { samsung,pins = "gpl-2"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-function = <S3C64XX_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; keypad_col3_1: keypad-col3-1-pins { samsung,pins = "gpl-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-function = <S3C64XX_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; keypad_col4_1: keypad-col4-1-pins { samsung,pins = "gpl-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-function = <S3C64XX_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; keypad_col5_1: keypad-col5-1-pins { samsung,pins = "gpl-5"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-function = <S3C64XX_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; keypad_col6_1: keypad-col6-1-pins { samsung,pins = "gpl-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-function = <S3C64XX_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; keypad_col7_1: keypad-col7-1-pins { samsung,pins = "gpl-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-function = <S3C64XX_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; keypad_row0_0: keypad-row0-0-pins { samsung,pins = "gpk-8"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-function = <S3C64XX_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; keypad_row1_0: keypad-row1-0-pins { samsung,pins = "gpk-9"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-function = <S3C64XX_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; keypad_row2_0: keypad-row2-0-pins { samsung,pins = "gpk-10"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-function = <S3C64XX_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; keypad_row3_0: keypad-row3-0-pins { samsung,pins = "gpk-11"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-function = <S3C64XX_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; keypad_row4_0: keypad-row4-0-pins { samsung,pins = "gpk-12"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-function = <S3C64XX_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; keypad_row5_0: keypad-row5-0-pins { samsung,pins = "gpk-13"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-function = <S3C64XX_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; keypad_row6_0: keypad-row6-0-pins { samsung,pins = "gpk-14"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-function = <S3C64XX_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; keypad_row7_0: keypad-row7-0-pins { samsung,pins = "gpk-15"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-function = <S3C64XX_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; keypad_row0_1: keypad-row0-1-pins { samsung,pins = "gpn-0"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-function = <S3C64XX_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; keypad_row1_1: keypad-row1-1-pins { samsung,pins = "gpn-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-function = <S3C64XX_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; keypad_row2_1: keypad-row2-1-pins { samsung,pins = "gpn-2"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-function = <S3C64XX_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; keypad_row3_1: keypad-row3-1-pins { samsung,pins = "gpn-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-function = <S3C64XX_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; keypad_row4_1: keypad-row4-1-pins { samsung,pins = "gpn-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-function = <S3C64XX_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; keypad_row5_1: keypad-row5-1-pins { samsung,pins = "gpn-5"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-function = <S3C64XX_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; keypad_row6_1: keypad-row6-1-pins { samsung,pins = "gpn-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-function = <S3C64XX_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; keypad_row7_1: keypad-row7-1-pins { samsung,pins = "gpn-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-function = <S3C64XX_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; lcd_ctrl: lcd-ctrl-pins { samsung,pins = "gpj-8", "gpj-9", "gpj-10", "gpj-11"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C64XX_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; @@ -648,7 +648,7 @@ "gpi-7", "gpi-10", "gpi-11", "gpi-12", "gpi-13", "gpi-14", "gpi-15", "gpj-3", "gpj-4", "gpj-5", "gpj-6", "gpj-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C64XX_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; @@ -658,7 +658,7 @@ "gpi-12", "gpi-13", "gpi-14", "gpi-15", "gpj-2", "gpj-3", "gpj-4", "gpj-5", "gpj-6", "gpj-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C64XX_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; @@ -669,14 +669,14 @@ "gpi-12", "gpi-13", "gpi-14", "gpi-15", "gpj-0", "gpj-1", "gpj-2", "gpj-3", "gpj-4", "gpj-5", "gpj-6", "gpj-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-function = <S3C64XX_PIN_FUNC_2>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; hsi_bus: hsi-bus-pins { samsung,pins = "gpk-0", "gpk-1", "gpk-2", "gpk-3", "gpk-4", "gpk-5", "gpk-6", "gpk-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-function = <S3C64XX_PIN_FUNC_3>; samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; }; diff --git a/dts/src/arm/s3c64xx-pinctrl.h b/dts/src/arm/s3c64xx-pinctrl.h new file mode 100644 index 0000000000..645c591db3 --- /dev/null +++ b/dts/src/arm/s3c64xx-pinctrl.h @@ -0,0 +1,27 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Samsung S3C64xx DTS pinctrl constants + * + * Copyright (c) 2016 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Copyright (c) 2022 Linaro Ltd + * Author: Krzysztof Kozlowski <krzk@kernel.org> + */ + +#ifndef __DTS_ARM_SAMSUNG_S3C64XX_PINCTRL_H__ +#define __DTS_ARM_SAMSUNG_S3C64XX_PINCTRL_H__ + +#define S3C64XX_PIN_PULL_NONE 0 +#define S3C64XX_PIN_PULL_DOWN 1 +#define S3C64XX_PIN_PULL_UP 2 + +#define S3C64XX_PIN_FUNC_INPUT 0 +#define S3C64XX_PIN_FUNC_OUTPUT 1 +#define S3C64XX_PIN_FUNC_2 2 +#define S3C64XX_PIN_FUNC_3 3 +#define S3C64XX_PIN_FUNC_4 4 +#define S3C64XX_PIN_FUNC_5 5 +#define S3C64XX_PIN_FUNC_6 6 +#define S3C64XX_PIN_FUNC_EINT 7 + +#endif /* __DTS_ARM_SAMSUNG_S3C64XX_PINCTRL_H__ */ diff --git a/dts/src/arm/s3c64xx.dtsi b/dts/src/arm/s3c64xx.dtsi index 67a7a66e11..c03df63555 100644 --- a/dts/src/arm/s3c64xx.dtsi +++ b/dts/src/arm/s3c64xx.dtsi @@ -59,7 +59,7 @@ #interrupt-cells = <1>; }; - sdhci0: sdhci@7c200000 { + sdhci0: mmc@7c200000 { compatible = "samsung,s3c6410-sdhci"; reg = <0x7c200000 0x100>; interrupt-parent = <&vic1>; @@ -70,7 +70,7 @@ status = "disabled"; }; - sdhci1: sdhci@7c300000 { + sdhci1: mmc@7c300000 { compatible = "samsung,s3c6410-sdhci"; reg = <0x7c300000 0x100>; interrupt-parent = <&vic1>; @@ -81,7 +81,7 @@ status = "disabled"; }; - sdhci2: sdhci@7c400000 { + sdhci2: mmc@7c400000 { compatible = "samsung,s3c6410-sdhci"; reg = <0x7c400000 0x100>; interrupt-parent = <&vic1>; diff --git a/dts/src/arm/s5pv210-aquila.dts b/dts/src/arm/s5pv210-aquila.dts index bc0b7354b6..0f5c6cd0f3 100644 --- a/dts/src/arm/s5pv210-aquila.dts +++ b/dts/src/arm/s5pv210-aquila.dts @@ -392,7 +392,7 @@ &pinctrl0 { t_flash_detect: t-flash-detect-pins { samsung,pins = "gph3-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; }; }; diff --git a/dts/src/arm/s5pv210-aries.dtsi b/dts/src/arm/s5pv210-aries.dtsi index daa1067055..5541df4df6 100644 --- a/dts/src/arm/s5pv210-aries.dtsi +++ b/dts/src/arm/s5pv210-aries.dtsi @@ -646,183 +646,183 @@ &pinctrl0 { bt_reset: bt-reset-pins { samsung,pins = "gpb-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; wlan_bt_en: wlan-bt-en-pins { samsung,pins = "gpb-5"; - samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; samsung,pin-val = <1>; }; codec_ldo: codec-ldo-pins { samsung,pins = "gpf3-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; }; prox_i2c_pins: gp2a-i2c-pins { samsung,pins = "gpg0-2", "gpg2-2"; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; wlan_gpio_rst: wlan-gpio-rst-pins { samsung,pins = "gpg1-2"; - samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; }; bt_wake: bt-wake-pins { samsung,pins = "gpg3-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; }; gp2a_irq: gp2a-irq-pins { samsung,pins = "gph0-2"; - samsung,pin-function = <EXYNOS_PIN_FUNC_F>; - samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_F>; + samsung,pin-pud = <S5PV210_PIN_PULL_DOWN>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; pmic_dvs_pins: pmic-dvs-pins { samsung,pins = "gph0-3", "gph0-4", "gph0-5"; - samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; samsung,pin-val = <0>; }; pmic_irq: pmic-irq-pins { samsung,pins = "gph0-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_F>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_F>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; wifi_host_wake: wifi-host-wake-pins { samsung,pins = "gph2-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; - samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>; + samsung,pin-pud = <S5PV210_PIN_PULL_DOWN>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; bt_host_wake: bt-host-wake-pins { samsung,pins = "gph2-5"; - samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; - samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>; + samsung,pin-pud = <S5PV210_PIN_PULL_DOWN>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; musb_irq: musq-irq-pins { samsung,pins = "gph2-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; tf_detect: tf-detect-pins { samsung,pins = "gph3-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; - samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>; + samsung,pin-pud = <S5PV210_PIN_PULL_DOWN>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; wifi_wake: wifi-wake-pins { samsung,pins = "gph3-5"; - samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; }; magnetometer_i2c_pins: yas529-i2c-pins-pins { samsung,pins = "gpj0-0", "gpj0-1"; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; ts_irq: ts-irq-pins { samsung,pins = "gpj0-5"; - samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; vibrator_ena: vibrator-ena-pins { samsung,pins = "gpj1-1"; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; gp2a_power: gp2a-power-pins { samsung,pins = "gpj1-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; touchkey_i2c_pins: touchkey-i2c-pins { samsung,pins = "gpj3-0", "gpj3-1"; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; touchkey_vdd_ena: touchkey-vdd-ena-pins { samsung,pins = "gpj3-2"; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; musb_i2c_pins: musb-i2c-pins { samsung,pins = "gpj3-4", "gpj3-5"; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; accel_i2c_pins: accel-i2c-pins { samsung,pins = "gpj3-6", "gpj3-7"; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; pmic_i2c_pins: pmic-i2c-pins-pins { samsung,pins = "gpj4-0", "gpj4-3"; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; touchkey_irq: touchkey-irq-pins { samsung,pins = "gpj4-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; - samsung,pin-pud = <S3C64XX_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>; + samsung,pin-pud = <S5PV210_PIN_PULL_UP>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; lcd_spi_pins: spi-lcd-pins { samsung,pins = "mp01-1", "mp04-1", "mp04-3"; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; fg_i2c_pins: fg-i2c-pins { samsung,pins = "mp05-0", "mp05-1"; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; sound_i2c_pins: sound-i2c-pins { samsung,pins = "mp05-2", "mp05-3"; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; panel_rst: panel-rst-pins { samsung,pins = "mp05-5"; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; }; diff --git a/dts/src/arm/s5pv210-fascinate4g.dts b/dts/src/arm/s5pv210-fascinate4g.dts index dfb2ee65e4..eaa7c4f0e2 100644 --- a/dts/src/arm/s5pv210-fascinate4g.dts +++ b/dts/src/arm/s5pv210-fascinate4g.dts @@ -17,20 +17,20 @@ gpio-keys { compatible = "gpio-keys"; - power { + key-power { label = "power"; gpios = <&gph2 6 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; wakeup-source; }; - vol-down { + key-vol-down { label = "volume_down"; gpios = <&gph3 2 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; }; - vol-up { + key-vol-up { label = "volume_up"; gpios = <&gph3 1 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; @@ -128,33 +128,33 @@ headset_det: headset-det-pins { samsung,pins = "gph0-6", "gph3-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_F>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-function = <S5PV210_PIN_FUNC_F>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; }; fg_irq: fg-irq-pins { samsung,pins = "gph3-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_F>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_F>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; headset_micbias_ena: headset-micbias-ena-pins { samsung,pins = "gpj2-5"; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; earpath_sel: earpath-sel-pins { samsung,pins = "gpj2-6"; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; main_micbias_ena: main-micbias-ena-pins { samsung,pins = "gpj4-2"; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; /* Based on vendor kernel v2.6.35.7 */ diff --git a/dts/src/arm/s5pv210-galaxys.dts b/dts/src/arm/s5pv210-galaxys.dts index a78caaa1f3..cdd3653d48 100644 --- a/dts/src/arm/s5pv210-galaxys.dts +++ b/dts/src/arm/s5pv210-galaxys.dts @@ -24,26 +24,26 @@ gpio-keys { compatible = "gpio-keys"; - power { + key-power { label = "power"; gpios = <&gph2 6 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; wakeup-source; }; - vol-down { + key-vol-down { label = "volume_down"; gpios = <&gph3 1 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; }; - vol-up { + key-vol-up { label = "volume_up"; gpios = <&gph3 2 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; - home { + key-home { label = "home"; gpios = <&gph3 5 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOME>; @@ -152,47 +152,47 @@ fm_i2c_pins: fm-i2c-pins-pins { samsung,pins = "gpd1-2", "gpd1-3"; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; headset_det: headset-det-pins { samsung,pins = "gph0-6", "gph3-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_F>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-function = <S5PV210_PIN_FUNC_F>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; }; fm_irq: fm-irq-pins { samsung,pins = "gpj2-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; - samsung,pin-pud = <S3C64XX_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>; + samsung,pin-pud = <S5PV210_PIN_PULL_UP>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; fm_rst: fm-rst-pins { samsung,pins = "gpj2-5"; - samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; earpath_sel: earpath-sel-pins { samsung,pins = "gpj2-6"; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; massmemory_en: massmemory-en-pins { samsung,pins = "gpj2-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; micbias_reg_ena: micbias-reg-ena-pins { samsung,pins = "gpj4-2"; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; /* Based on CyanogenMod 3.0.101 kernel */ diff --git a/dts/src/arm/s5pv210-pinctrl.dtsi b/dts/src/arm/s5pv210-pinctrl.dtsi index ae34e7e578..6d6daef9fb 100644 --- a/dts/src/arm/s5pv210-pinctrl.dtsi +++ b/dts/src/arm/s5pv210-pinctrl.dtsi @@ -16,13 +16,13 @@ * nodes can be added to this file. */ -#include <dt-bindings/pinctrl/samsung.h> +#include "s5pv210-pinctrl.h" #define PIN_SLP(_pin, _mode, _pull) \ _pin { \ samsung,pins = #_pin; \ - samsung,pin-con-pdn = <EXYNOS_PIN_PDN_ ##_mode>; \ - samsung,pin-pud-pdn = <S3C64XX_PIN_PULL_ ##_pull>; \ + samsung,pin-con-pdn = <S5PV210_PIN_PDN_ ##_mode>; \ + samsung,pin-pud-pdn = <S5PV210_PIN_PULL_ ##_pull>; \ } &pinctrl0 { @@ -280,559 +280,559 @@ uart0_data: uart0-data-pins { samsung,pins = "gpa0-0", "gpa0-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_2>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; uart0_fctl: uart0-fctl-pins { samsung,pins = "gpa0-2", "gpa0-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_2>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; uart1_data: uart1-data-pins { samsung,pins = "gpa0-4", "gpa0-5"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_2>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; uart1_fctl: uart1-fctl-pins { samsung,pins = "gpa0-6", "gpa0-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_2>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; uart2_data: uart2-data-pins { samsung,pins = "gpa1-0", "gpa1-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_2>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; uart2_fctl: uart2-fctl-pins { samsung,pins = "gpa1-2", "gpa1-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_3>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; uart3_data: uart3-data-pins { samsung,pins = "gpa1-2", "gpa1-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_2>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; uart_audio: uart-audio-pins { samsung,pins = "gpa1-2", "gpa1-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_4>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_4>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; spi0_bus: spi0-bus-pins { samsung,pins = "gpb-0", "gpb-2", "gpb-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <S3C64XX_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_2>; + samsung,pin-pud = <S5PV210_PIN_PULL_UP>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; spi1_bus: spi1-bus-pins { samsung,pins = "gpb-4", "gpb-6", "gpb-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <S3C64XX_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_2>; + samsung,pin-pud = <S5PV210_PIN_PULL_UP>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; i2s0_bus: i2s0-bus-pins { samsung,pins = "gpi-0", "gpi-1", "gpi-2", "gpi-3", "gpi-4", "gpi-5", "gpi-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_2>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; i2s1_bus: i2s1-bus-pins { samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3", "gpc0-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_2>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; i2s2_bus: i2s2-bus-pins { samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_4>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_4>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; pcm1_bus: pcm1-bus-pins { samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3", "gpc0-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_3>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; ac97_bus: ac97-bus-pins { samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3", "gpc0-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_4>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_4>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; i2s2_bus: i2s2-bus-pins { samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_2>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; pcm2_bus: pcm2-bus-pins { samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_3>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; spdif_bus: spdif-bus-pins { samsung,pins = "gpc1-0", "gpc1-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_4>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_4>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; spi2_bus: spi2-bus-pins { samsung,pins = "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_5>; - samsung,pin-pud = <S3C64XX_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_5>; + samsung,pin-pud = <S5PV210_PIN_PULL_UP>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; i2c0_bus: i2c0-bus-pins { samsung,pins = "gpd1-0", "gpd1-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <S3C64XX_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_2>; + samsung,pin-pud = <S5PV210_PIN_PULL_UP>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; i2c1_bus: i2c1-bus-pins { samsung,pins = "gpd1-2", "gpd1-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <S3C64XX_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_2>; + samsung,pin-pud = <S5PV210_PIN_PULL_UP>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; i2c2_bus: i2c2-bus-pins { samsung,pins = "gpd1-4", "gpd1-5"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <S3C64XX_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_2>; + samsung,pin-pud = <S5PV210_PIN_PULL_UP>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; pwm0_out: pwm0-out-pins { samsung,pins = "gpd0-0"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_2>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; pwm1_out: pwm1-out-pins { samsung,pins = "gpd0-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_2>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; pwm2_out: pwm2-out-pins { samsung,pins = "gpd0-2"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_2>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; pwm3_out: pwm3-out-pins { samsung,pins = "gpd0-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_2>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; keypad_row0: keypad-row-0-pins { samsung,pins = "gph3-0"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_3>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; keypad_row1: keypad-row-1-pins { samsung,pins = "gph3-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_3>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; keypad_row2: keypad-row-2-pins { samsung,pins = "gph3-2"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_3>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; keypad_row3: keypad-row-3-pins { samsung,pins = "gph3-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_3>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; keypad_row4: keypad-row-4-pins { samsung,pins = "gph3-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_3>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; keypad_row5: keypad-row-5-pins { samsung,pins = "gph3-5"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_3>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; keypad_row6: keypad-row-6-pins { samsung,pins = "gph3-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_3>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; keypad_row7: keypad-row-7-pins { samsung,pins = "gph3-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_3>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; keypad_col0: keypad-col-0-pins { samsung,pins = "gph2-0"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_3>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; keypad_col1: keypad-col-1-pins { samsung,pins = "gph2-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_3>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; keypad_col2: keypad-col-2-pins { samsung,pins = "gph2-2"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_3>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; keypad_col3: keypad-col-3-pins { samsung,pins = "gph2-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_3>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; keypad_col4: keypad-col-4-pins { samsung,pins = "gph2-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_3>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; keypad_col5: keypad-col-5-pins { samsung,pins = "gph2-5"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_3>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; keypad_col6: keypad-col-6-pins { samsung,pins = "gph2-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_3>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; keypad_col7: keypad-col-7-pins { samsung,pins = "gph2-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_3>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; sd0_clk: sd0-clk-pins { samsung,pins = "gpg0-0"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + samsung,pin-function = <S5PV210_PIN_FUNC_2>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV4>; }; sd0_cmd: sd0-cmd-pins { samsung,pins = "gpg0-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + samsung,pin-function = <S5PV210_PIN_FUNC_2>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV4>; }; sd0_cd: sd0-cd-pins { samsung,pins = "gpg0-2"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <S3C64XX_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + samsung,pin-function = <S5PV210_PIN_FUNC_2>; + samsung,pin-pud = <S5PV210_PIN_PULL_UP>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV4>; }; sd0_bus1: sd0-bus-width1-pins { samsung,pins = "gpg0-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <S3C64XX_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + samsung,pin-function = <S5PV210_PIN_FUNC_2>; + samsung,pin-pud = <S5PV210_PIN_PULL_UP>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV4>; }; sd0_bus4: sd0-bus-width4-pins { samsung,pins = "gpg0-3", "gpg0-4", "gpg0-5", "gpg0-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <S3C64XX_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + samsung,pin-function = <S5PV210_PIN_FUNC_2>; + samsung,pin-pud = <S5PV210_PIN_PULL_UP>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV4>; }; sd0_bus8: sd0-bus-width8-pins { samsung,pins = "gpg1-3", "gpg1-4", "gpg1-5", "gpg1-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <S3C64XX_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + samsung,pin-function = <S5PV210_PIN_FUNC_3>; + samsung,pin-pud = <S5PV210_PIN_PULL_UP>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV4>; }; sd1_clk: sd1-clk-pins { samsung,pins = "gpg1-0"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + samsung,pin-function = <S5PV210_PIN_FUNC_2>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV4>; }; sd1_cmd: sd1-cmd-pins { samsung,pins = "gpg1-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + samsung,pin-function = <S5PV210_PIN_FUNC_2>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV4>; }; sd1_cd: sd1-cd-pins { samsung,pins = "gpg1-2"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <S3C64XX_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + samsung,pin-function = <S5PV210_PIN_FUNC_2>; + samsung,pin-pud = <S5PV210_PIN_PULL_UP>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV4>; }; sd1_bus1: sd1-bus-width1-pins { samsung,pins = "gpg1-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <S3C64XX_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + samsung,pin-function = <S5PV210_PIN_FUNC_2>; + samsung,pin-pud = <S5PV210_PIN_PULL_UP>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV4>; }; sd1_bus4: sd1-bus-width4-pins { samsung,pins = "gpg1-3", "gpg1-4", "gpg1-5", "gpg1-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <S3C64XX_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + samsung,pin-function = <S5PV210_PIN_FUNC_2>; + samsung,pin-pud = <S5PV210_PIN_PULL_UP>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV4>; }; sd2_clk: sd2-clk-pins { samsung,pins = "gpg2-0"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + samsung,pin-function = <S5PV210_PIN_FUNC_2>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV4>; }; sd2_cmd: sd2-cmd-pins { samsung,pins = "gpg2-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + samsung,pin-function = <S5PV210_PIN_FUNC_2>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV4>; }; sd2_cd: sd2-cd-pins { samsung,pins = "gpg2-2"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <S3C64XX_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + samsung,pin-function = <S5PV210_PIN_FUNC_2>; + samsung,pin-pud = <S5PV210_PIN_PULL_UP>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV4>; }; sd2_bus1: sd2-bus-width1-pins { samsung,pins = "gpg2-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <S3C64XX_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + samsung,pin-function = <S5PV210_PIN_FUNC_2>; + samsung,pin-pud = <S5PV210_PIN_PULL_UP>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV4>; }; sd2_bus4: sd2-bus-width4-pins { samsung,pins = "gpg2-3", "gpg2-4", "gpg2-5", "gpg2-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <S3C64XX_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + samsung,pin-function = <S5PV210_PIN_FUNC_2>; + samsung,pin-pud = <S5PV210_PIN_PULL_UP>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV4>; }; sd2_bus8: sd2-bus-width8-pins { samsung,pins = "gpg3-3", "gpg3-4", "gpg3-5", "gpg3-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <S3C64XX_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + samsung,pin-function = <S5PV210_PIN_FUNC_3>; + samsung,pin-pud = <S5PV210_PIN_PULL_UP>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV4>; }; sd3_clk: sd3-clk-pins { samsung,pins = "gpg3-0"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + samsung,pin-function = <S5PV210_PIN_FUNC_2>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV4>; }; sd3_cmd: sd3-cmd-pins { samsung,pins = "gpg3-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + samsung,pin-function = <S5PV210_PIN_FUNC_2>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV4>; }; sd3_cd: sd3-cd-pins { samsung,pins = "gpg3-2"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <S3C64XX_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + samsung,pin-function = <S5PV210_PIN_FUNC_2>; + samsung,pin-pud = <S5PV210_PIN_PULL_UP>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV4>; }; sd3_bus1: sd3-bus-width1-pins { samsung,pins = "gpg3-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <S3C64XX_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + samsung,pin-function = <S5PV210_PIN_FUNC_2>; + samsung,pin-pud = <S5PV210_PIN_PULL_UP>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV4>; }; sd3_bus4: sd3-bus-width4-pins { samsung,pins = "gpg3-3", "gpg3-4", "gpg3-5", "gpg3-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <S3C64XX_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + samsung,pin-function = <S5PV210_PIN_FUNC_2>; + samsung,pin-pud = <S5PV210_PIN_PULL_UP>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV4>; }; eint0: ext-int0-pins { samsung,pins = "gph0-0"; - samsung,pin-function = <EXYNOS_PIN_FUNC_F>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_F>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; eint8: ext-int8-pins { samsung,pins = "gph1-0"; - samsung,pin-function = <EXYNOS_PIN_FUNC_F>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_F>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; eint15: ext-int15-pins { samsung,pins = "gph1-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_F>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_F>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; eint16: ext-int16-pins { samsung,pins = "gph2-0"; - samsung,pin-function = <EXYNOS_PIN_FUNC_F>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_F>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; eint31: ext-int31-pins { samsung,pins = "gph3-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_F>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_F>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; cam_port_a_io: cam-port-a-io-pins { samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3", "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7", "gpe1-0", "gpe1-1", "gpe1-2", "gpe1-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_2>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; cam_port_a_clk_active: cam-port-a-clk-active-pins { samsung,pins = "gpe1-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + samsung,pin-function = <S5PV210_PIN_FUNC_2>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV4>; }; cam_port_a_clk_idle: cam-port-a-clk-idle-pins { samsung,pins = "gpe1-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; - samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>; + samsung,pin-pud = <S5PV210_PIN_PULL_DOWN>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; cam_port_b_io: cam-port-b-io-pins { samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3", "gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7", "gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_3>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; cam_port_b_clk_active: cam-port-b-clk-active-pins { samsung,pins = "gpj1-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + samsung,pin-function = <S5PV210_PIN_FUNC_3>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV4>; }; cam_port_b_clk_idle: cam-port-b-clk-idle-pins { samsung,pins = "gpj1-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; - samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>; + samsung,pin-pud = <S5PV210_PIN_PULL_DOWN>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; lcd_ctrl: lcd-ctrl-pins { samsung,pins = "gpd0-0", "gpd0-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_3>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; lcd_sync: lcd-sync-pins { samsung,pins = "gpf0-0", "gpf0-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_2>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; lcd_clk: lcd-clk-pins { samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_2>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; lcd_data24: lcd-data-width24-pins { @@ -842,8 +842,8 @@ "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3", "gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7", "gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <S5PV210_PIN_FUNC_2>; + samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; + samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; }; }; diff --git a/dts/src/arm/s5pv210-pinctrl.h b/dts/src/arm/s5pv210-pinctrl.h new file mode 100644 index 0000000000..29bdf376d8 --- /dev/null +++ b/dts/src/arm/s5pv210-pinctrl.h @@ -0,0 +1,39 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Samsung S5PV210 DTS pinctrl constants + * + * Copyright (c) 2016 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Copyright (c) 2022 Linaro Ltd + * Author: Krzysztof Kozlowski <krzk@kernel.org> + */ + +#ifndef __DTS_ARM_SAMSUNG_S5PV210_PINCTRL_H__ +#define __DTS_ARM_SAMSUNG_S5PV210_PINCTRL_H__ + +#define S5PV210_PIN_PULL_NONE 0 +#define S5PV210_PIN_PULL_DOWN 1 +#define S5PV210_PIN_PULL_UP 2 + +/* Pin function in power down mode */ +#define S5PV210_PIN_PDN_OUT0 0 +#define S5PV210_PIN_PDN_OUT1 1 +#define S5PV210_PIN_PDN_INPUT 2 +#define S5PV210_PIN_PDN_PREV 3 + +#define S5PV210_PIN_DRV_LV1 0 +#define S5PV210_PIN_DRV_LV2 2 +#define S5PV210_PIN_DRV_LV3 1 +#define S5PV210_PIN_DRV_LV4 3 + +#define S5PV210_PIN_FUNC_INPUT 0 +#define S5PV210_PIN_FUNC_OUTPUT 1 +#define S5PV210_PIN_FUNC_2 2 +#define S5PV210_PIN_FUNC_3 3 +#define S5PV210_PIN_FUNC_4 4 +#define S5PV210_PIN_FUNC_5 5 +#define S5PV210_PIN_FUNC_6 6 +#define S5PV210_PIN_FUNC_EINT 0xf +#define S5PV210_PIN_FUNC_F S5PV210_PIN_FUNC_EINT + +#endif /* __DTS_ARM_SAMSUNG_S5PV210_PINCTRL_H__ */ diff --git a/dts/src/arm/s5pv210.dtsi b/dts/src/arm/s5pv210.dtsi index f1b85aae88..12e90a1cc6 100644 --- a/dts/src/arm/s5pv210.dtsi +++ b/dts/src/arm/s5pv210.dtsi @@ -357,7 +357,7 @@ status = "disabled"; }; - sdhci0: sdhci@eb000000 { + sdhci0: mmc@eb000000 { compatible = "samsung,s3c6410-sdhci"; reg = <0xeb000000 0x100000>; interrupt-parent = <&vic1>; @@ -368,7 +368,7 @@ status = "disabled"; }; - sdhci1: sdhci@eb100000 { + sdhci1: mmc@eb100000 { compatible = "samsung,s3c6410-sdhci"; reg = <0xeb100000 0x100000>; interrupt-parent = <&vic1>; @@ -379,7 +379,7 @@ status = "disabled"; }; - sdhci2: sdhci@eb200000 { + sdhci2: mmc@eb200000 { compatible = "samsung,s3c6410-sdhci"; reg = <0xeb200000 0x100000>; interrupt-parent = <&vic1>; @@ -390,7 +390,7 @@ status = "disabled"; }; - sdhci3: sdhci@eb300000 { + sdhci3: mmc@eb300000 { compatible = "samsung,s3c6410-sdhci"; reg = <0xeb300000 0x100000>; interrupt-parent = <&vic3>; diff --git a/dts/src/arm/sam9x60.dtsi b/dts/src/arm/sam9x60.dtsi index c328b67bea..d3f60f6a45 100644 --- a/dts/src/arm/sam9x60.dtsi +++ b/dts/src/arm/sam9x60.dtsi @@ -464,7 +464,7 @@ interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>; clocks = <&pmc PMC_TYPE_PERIPHERAL 18>; #pwm-cells = <3>; - status="disabled"; + status = "disabled"; }; hlcdc: hlcdc@f8038000 { @@ -667,7 +667,7 @@ clock-names = "td_slck", "md_slck", "main_xtal"; }; - reset_controller: rstc@fffffe00 { + reset_controller: reset-controller@fffffe00 { compatible = "microchip,sam9x60-rstc"; reg = <0xfffffe00 0x10>; clocks = <&clk32k 0>; diff --git a/dts/src/arm/sama5d2.dtsi b/dts/src/arm/sama5d2.dtsi index 659a17fc75..2c50a021aa 100644 --- a/dts/src/arm/sama5d2.dtsi +++ b/dts/src/arm/sama5d2.dtsi @@ -99,6 +99,16 @@ ranges = <0 0x00200000 0x20000>; }; + resistive_touch: resistive-touch { + compatible = "resistive-adc-touch"; + io-channels = <&adc AT91_SAMA5D2_ADC_X_CHANNEL>, + <&adc AT91_SAMA5D2_ADC_Y_CHANNEL>, + <&adc AT91_SAMA5D2_ADC_P_CHANNEL>; + io-channel-names = "x", "y", "pressure"; + touchscreen-min-pressure = <50000>; + status = "disabled"; + }; + ahb { compatible = "simple-bus"; #address-cells = <1>; @@ -374,8 +384,6 @@ interrupts = <5 IRQ_TYPE_LEVEL_HIGH 3 /* Queue 0 */ 66 IRQ_TYPE_LEVEL_HIGH 3 /* Queue 1 */ 67 IRQ_TYPE_LEVEL_HIGH 3>; /* Queue 2 */ - #address-cells = <1>; - #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 5>, <&pmc PMC_TYPE_PERIPHERAL 5>; clock-names = "hclk", "pclk"; status = "disabled"; @@ -660,7 +668,7 @@ ranges = <0 0xf8044000 0x1420>; }; - reset_controller: rstc@f8048000 { + reset_controller: reset-controller@f8048000 { compatible = "atmel,sama5d3-rstc"; reg = <0xf8048000 0x10>; clocks = <&clk32k>; @@ -1050,16 +1058,6 @@ status = "disabled"; }; - resistive_touch: resistive-touch { - compatible = "resistive-adc-touch"; - io-channels = <&adc AT91_SAMA5D2_ADC_X_CHANNEL>, - <&adc AT91_SAMA5D2_ADC_Y_CHANNEL>, - <&adc AT91_SAMA5D2_ADC_P_CHANNEL>; - io-channel-names = "x", "y", "pressure"; - touchscreen-min-pressure = <50000>; - status = "disabled"; - }; - pioA: pinctrl@fc038000 { compatible = "atmel,sama5d2-pinctrl"; reg = <0xfc038000 0x600>; diff --git a/dts/src/arm/sama5d3.dtsi b/dts/src/arm/sama5d3.dtsi index 8fa423c525..2d0935ad22 100644 --- a/dts/src/arm/sama5d3.dtsi +++ b/dts/src/arm/sama5d3.dtsi @@ -1003,7 +1003,7 @@ clock-names = "slow_clk", "main_xtal"; }; - reset_controller: rstc@fffffe00 { + reset_controller: reset-controller@fffffe00 { compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc"; reg = <0xfffffe00 0x10>; clocks = <&clk32k>; diff --git a/dts/src/arm/sama5d4.dtsi b/dts/src/arm/sama5d4.dtsi index 7b92426648..1e5c01898c 100644 --- a/dts/src/arm/sama5d4.dtsi +++ b/dts/src/arm/sama5d4.dtsi @@ -726,7 +726,7 @@ }; }; - reset_controller: rstc@fc068600 { + reset_controller: reset-controller@fc068600 { compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc"; reg = <0xfc068600 0x10>; clocks = <&clk32k>; diff --git a/dts/src/arm/sama7g5.dtsi b/dts/src/arm/sama7g5.dtsi index a37e3a8039..bb6d71e6df 100644 --- a/dts/src/arm/sama7g5.dtsi +++ b/dts/src/arm/sama7g5.dtsi @@ -198,6 +198,13 @@ clock-names = "td_slck", "md_slck", "main_xtal"; }; + reset_controller: reset-controller@e001d000 { + compatible = "microchip,sama7g5-rstc"; + reg = <0xe001d000 0xc>, <0xe001d0e4 0x4>; + #reset-cells = <1>; + clocks = <&clk32k 0>; + }; + shdwc: shdwc@e001d010 { compatible = "microchip,sama7g5-shdwc", "syscon"; reg = <0xe001d010 0x10>; diff --git a/dts/src/arm/sd5203.dts b/dts/src/arm/sd5203.dts index a61a078ea0..69381819e0 100644 --- a/dts/src/arm/sd5203.dts +++ b/dts/src/arm/sd5203.dts @@ -15,7 +15,7 @@ #size-cells = <1>; chosen { - bootargs="console=ttyS0,9600 earlycon=uart8250,mmio32,0x1600d000"; + bootargs = "console=ttyS0,9600 earlycon=uart8250,mmio32,0x1600d000"; }; aliases { diff --git a/dts/src/arm/socfpga.dtsi b/dts/src/arm/socfpga.dtsi index bfaef45bdd..2459f3cd7d 100644 --- a/dts/src/arm/socfpga.dtsi +++ b/dts/src/arm/socfpga.dtsi @@ -561,6 +561,12 @@ interrupts = <0 175 4>; }; + socfpga_axi_setup: stmmac-axi-config { + snps,wr_osr_lmt = <0xf>; + snps,rd_osr_lmt = <0xf>; + snps,blen = <0 0 0 0 16 0 0>; + }; + gmac0: ethernet@ff700000 { compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac"; altr,sysmgr-syscon = <&sysmgr 0x60 0>; @@ -576,6 +582,7 @@ snps,perfect-filter-entries = <128>; tx-fifo-depth = <4096>; rx-fifo-depth = <4096>; + snps,axi-config = <&socfpga_axi_setup>; status = "disabled"; }; @@ -594,6 +601,7 @@ snps,perfect-filter-entries = <128>; tx-fifo-depth = <4096>; rx-fifo-depth = <4096>; + snps,axi-config = <&socfpga_axi_setup>; status = "disabled"; }; diff --git a/dts/src/arm/socfpga_arria10.dtsi b/dts/src/arm/socfpga_arria10.dtsi index 26bda2557f..4370e3cbbb 100644 --- a/dts/src/arm/socfpga_arria10.dtsi +++ b/dts/src/arm/socfpga_arria10.dtsi @@ -736,6 +736,16 @@ <37 IRQ_TYPE_LEVEL_HIGH>; }; + sdmmca-ecc@ff8c2c00 { + compatible = "altr,socfpga-sdmmc-ecc"; + reg = <0xff8c2c00 0x400>; + altr,ecc-parent = <&mmc>; + interrupts = <15 IRQ_TYPE_LEVEL_HIGH>, + <47 IRQ_TYPE_LEVEL_HIGH>, + <16 IRQ_TYPE_LEVEL_HIGH>, + <48 IRQ_TYPE_LEVEL_HIGH>; + }; + dma-ecc@ff8c8000 { compatible = "altr,socfpga-dma-ecc"; reg = <0xff8c8000 0x400>; diff --git a/dts/src/arm/socfpga_arria10_chameleonv3.dts b/dts/src/arm/socfpga_arria10_chameleonv3.dts new file mode 100644 index 0000000000..422d00cd4c --- /dev/null +++ b/dts/src/arm/socfpga_arria10_chameleonv3.dts @@ -0,0 +1,90 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2022 Google LLC + */ +/dts-v1/; +#include "socfpga_arria10_mercury_aa1.dtsi" + +/ { + model = "Google Chameleon V3"; + compatible = "google,chameleon-v3", "enclustra,mercury-aa1", + "altr,socfpga-arria10", "altr,socfpga"; + + aliases { + serial0 = &uart0; + i2c0 = &i2c0; + i2c1 = &i2c1; + }; +}; + +&gmac0 { + status = "okay"; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + ssm2603: audio-codec@1a { + compatible = "adi,ssm2603"; + reg = <0x1a>; + }; +}; + +&i2c1 { + status = "okay"; + + u80: gpio@21 { + compatible = "nxp,pca9535"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "SOM_AUD_MUTE", + "DP1_OUT_CEC_EN", + "DP2_OUT_CEC_EN", + "DP1_SOM_PS8469_CAD", + "DPD_SOM_PS8469_CAD", + "DP_OUT_PWR_EN", + "STM32_RST_L", + "STM32_BOOT0", + + "FPGA_PROT", + "STM32_FPGA_COMM0", + "TP119", + "TP120", + "TP121", + "TP122", + "TP123", + "TP124"; + }; +}; + +&mmc { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; +}; diff --git a/dts/src/arm/socfpga_arria10_mercury_aa1.dts b/dts/src/arm/socfpga_arria10_mercury_aa1.dtsi index a75c059b67..ad7cd14de6 100644 --- a/dts/src/arm/socfpga_arria10_mercury_aa1.dts +++ b/dts/src/arm/socfpga_arria10_mercury_aa1.dtsi @@ -1,5 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 -/dts-v1/; +/* + * Copyright 2022 Google LLC + */ #include "socfpga_arria10.dtsi" @@ -11,8 +13,6 @@ aliases { ethernet0 = &gmac0; serial1 = &uart1; - i2c0 = &i2c0; - i2c1 = &i2c1; }; memory@0 { @@ -26,24 +26,11 @@ }; }; -&eccmgr { - sdmmca-ecc@ff8c2c00 { - compatible = "altr,socfpga-sdmmc-ecc"; - reg = <0xff8c2c00 0x400>; - altr,ecc-parent = <&mmc>; - interrupts = <15 IRQ_TYPE_LEVEL_HIGH>, - <47 IRQ_TYPE_LEVEL_HIGH>, - <16 IRQ_TYPE_LEVEL_HIGH>, - <48 IRQ_TYPE_LEVEL_HIGH>; - }; -}; - &gmac0 { phy-mode = "rgmii"; phy-addr = <0xffffffff>; /* probe for phy addr */ max-frame-size = <3800>; - status = "okay"; phy-handle = <&phy3>; @@ -69,22 +56,13 @@ }; }; -&gpio0 { - status = "okay"; -}; - -&gpio1 { - status = "okay"; -}; - -&gpio2 { - status = "okay"; -}; - &i2c1 { - status = "okay"; + atsha204a: crypto@64 { + compatible = "atmel,atsha204a"; + reg = <0x64>; + }; + isl12022: isl12022@6f { - status = "okay"; compatible = "isil,isl12022"; reg = <0x6f>; }; @@ -92,7 +70,6 @@ /* Following mappings are taken from arria10 socdk dts */ &mmc { - status = "okay"; cap-sd-highspeed; broken-cd; bus-width = <4>; @@ -101,12 +78,3 @@ &osc1 { clock-frequency = <33330000>; }; - -&uart1 { - status = "okay"; -}; - -&usb0 { - status = "okay"; - dr_mode = "host"; -}; diff --git a/dts/src/arm/spear1310-evb.dts b/dts/src/arm/spear1310-evb.dts index ddd1cf4d05..05408df382 100644 --- a/dts/src/arm/spear1310-evb.dts +++ b/dts/src/arm/spear1310-evb.dts @@ -170,7 +170,7 @@ smi: flash@ea000000 { status = "okay"; - clock-rate=<50000000>; + clock-rate = <50000000>; flash@e6000000 { #address-cells = <1>; diff --git a/dts/src/arm/spear1340-evb.dts b/dts/src/arm/spear1340-evb.dts index 3a51a41eb5..7700f2afc1 100644 --- a/dts/src/arm/spear1340-evb.dts +++ b/dts/src/arm/spear1340-evb.dts @@ -168,7 +168,7 @@ smi: flash@ea000000 { status = "okay"; - clock-rate=<50000000>; + clock-rate = <50000000>; flash@e6000000 { #address-cells = <1>; diff --git a/dts/src/arm/spear1340.dtsi b/dts/src/arm/spear1340.dtsi index 13e1bdb3dd..818886e117 100644 --- a/dts/src/arm/spear1340.dtsi +++ b/dts/src/arm/spear1340.dtsi @@ -88,7 +88,7 @@ }; pwm: pwm@e0180000 { - compatible ="st,spear13xx-pwm"; + compatible = "st,spear13xx-pwm"; reg = <0xe0180000 0x1000>; #pwm-cells = <2>; status = "disabled"; diff --git a/dts/src/arm/spear300-evb.dts b/dts/src/arm/spear300-evb.dts index 2beb30ca2c..303ef29fb8 100644 --- a/dts/src/arm/spear300-evb.dts +++ b/dts/src/arm/spear300-evb.dts @@ -80,7 +80,7 @@ smi: flash@fc000000 { status = "okay"; - clock-rate=<50000000>; + clock-rate = <50000000>; flash@f8000000 { #address-cells = <1>; diff --git a/dts/src/arm/spear310-evb.dts b/dts/src/arm/spear310-evb.dts index 1c41e4a403..ea0b53036f 100644 --- a/dts/src/arm/spear310-evb.dts +++ b/dts/src/arm/spear310-evb.dts @@ -94,7 +94,7 @@ smi: flash@fc000000 { status = "okay"; - clock-rate=<50000000>; + clock-rate = <50000000>; flash@f8000000 { #address-cells = <1>; diff --git a/dts/src/arm/spear320-evb.dts b/dts/src/arm/spear320-evb.dts index c322407a0a..3c026d021c 100644 --- a/dts/src/arm/spear320-evb.dts +++ b/dts/src/arm/spear320-evb.dts @@ -95,7 +95,7 @@ smi: flash@fc000000 { status = "okay"; - clock-rate=<50000000>; + clock-rate = <50000000>; flash@f8000000 { #address-cells = <1>; diff --git a/dts/src/arm/spear320-hmi.dts b/dts/src/arm/spear320-hmi.dts index b587e4ec11..34503ac9c5 100644 --- a/dts/src/arm/spear320-hmi.dts +++ b/dts/src/arm/spear320-hmi.dts @@ -167,7 +167,7 @@ smi: flash@fc000000 { status = "okay"; - clock-rate=<50000000>; + clock-rate = <50000000>; flash@f8000000 { #address-cells = <1>; diff --git a/dts/src/arm/spear320.dtsi b/dts/src/arm/spear320.dtsi index 47ac4474ed..b12474446a 100644 --- a/dts/src/arm/spear320.dtsi +++ b/dts/src/arm/spear320.dtsi @@ -78,7 +78,7 @@ }; pwm: pwm@a8000000 { - compatible ="st,spear-pwm"; + compatible = "st,spear-pwm"; reg = <0xa8000000 0x1000>; #pwm-cells = <2>; status = "disabled"; diff --git a/dts/src/arm/ste-ab8500.dtsi b/dts/src/arm/ste-ab8500.dtsi index 35137c6e52..dd30d08ccb 100644 --- a/dts/src/arm/ste-ab8500.dtsi +++ b/dts/src/arm/ste-ab8500.dtsi @@ -195,7 +195,7 @@ "CH_WD_EXP", "VBUS_CH_DROP_END"; monitored-battery = <&battery>; - vddadc-supply = <&ab8500_ldo_tvout_reg>; + vddadc-supply = <&ab8500_ldo_tvout_reg>; io-channels = <&gpadc 0x03>, <&gpadc 0x0a>, <&gpadc 0x09>, @@ -207,8 +207,8 @@ }; ab8500_chargalg { - compatible = "stericsson,ab8500-chargalg"; - monitored-battery = <&battery>; + compatible = "stericsson,ab8500-chargalg"; + monitored-battery = <&battery>; }; ab8500_usb: phy { diff --git a/dts/src/arm/ste-dbx5x0.dtsi b/dts/src/arm/ste-dbx5x0.dtsi index c28b326402..9afe8301bd 100644 --- a/dts/src/arm/ste-dbx5x0.dtsi +++ b/dts/src/arm/ste-dbx5x0.dtsi @@ -661,7 +661,6 @@ #address-cells = <1>; #size-cells = <0>; - v-i2c-supply = <&db8500_vape_reg>; clock-frequency = <400000>; clocks = <&prcc_kclk 3 3>, <&prcc_pclk 3 3>; @@ -679,7 +678,6 @@ #address-cells = <1>; #size-cells = <0>; - v-i2c-supply = <&db8500_vape_reg>; clock-frequency = <400000>; @@ -698,7 +696,6 @@ #address-cells = <1>; #size-cells = <0>; - v-i2c-supply = <&db8500_vape_reg>; clock-frequency = <400000>; @@ -717,7 +714,6 @@ #address-cells = <1>; #size-cells = <0>; - v-i2c-supply = <&db8500_vape_reg>; clock-frequency = <400000>; @@ -736,7 +732,6 @@ #address-cells = <1>; #size-cells = <0>; - v-i2c-supply = <&db8500_vape_reg>; clock-frequency = <400000>; diff --git a/dts/src/arm/ste-hrefv60plus.dtsi b/dts/src/arm/ste-hrefv60plus.dtsi index 8f504edefd..e66fa59c2d 100644 --- a/dts/src/arm/ste-hrefv60plus.dtsi +++ b/dts/src/arm/ste-hrefv60plus.dtsi @@ -353,11 +353,11 @@ * Drive DISP1 reset high (not reset), driver DISP2 reset low (reset) */ hrefv60_cfg1 { - pins ="GPIO65_F1"; + pins = "GPIO65_F1"; ste,config = <&gpio_out_hi>; }; hrefv60_cfg2 { - pins ="GPIO66_G3"; + pins = "GPIO66_G3"; ste,config = <&gpio_out_lo>; }; }; diff --git a/dts/src/arm/ste-ux500-samsung-codina.dts b/dts/src/arm/ste-ux500-samsung-codina.dts index b6746ac167..5f41256d7f 100644 --- a/dts/src/arm/ste-ux500-samsung-codina.dts +++ b/dts/src/arm/ste-ux500-samsung-codina.dts @@ -598,8 +598,8 @@ reg = <0x19>; vdd-supply = <&ab8500_ldo_aux1_reg>; // 3V vddio-supply = <&ab8500_ldo_aux2_reg>; // 1.8V - mount-matrix = "0", "-1", "0", - "1", "0", "0", + mount-matrix = "0", "1", "0", + "-1", "0", "0", "0", "0", "1"; }; }; diff --git a/dts/src/arm/ste-ux500-samsung-gavini.dts b/dts/src/arm/ste-ux500-samsung-gavini.dts index 53062d50e4..806da3fc33 100644 --- a/dts/src/arm/ste-ux500-samsung-gavini.dts +++ b/dts/src/arm/ste-ux500-samsung-gavini.dts @@ -527,8 +527,8 @@ accelerometer@18 { compatible = "bosch,bma222e"; reg = <0x18>; - mount-matrix = "0", "1", "0", - "-1", "0", "0", + mount-matrix = "0", "-1", "0", + "1", "0", "0", "0", "0", "1"; vddio-supply = <&ab8500_ldo_aux2_reg>; // 1.8V vdd-supply = <&ab8500_ldo_aux1_reg>; // 3V diff --git a/dts/src/arm/ste-ux500-samsung-janice.dts b/dts/src/arm/ste-ux500-samsung-janice.dts index e6d4fd0eb5..ed5c79c3d0 100644 --- a/dts/src/arm/ste-ux500-samsung-janice.dts +++ b/dts/src/arm/ste-ux500-samsung-janice.dts @@ -633,8 +633,8 @@ accelerometer@8 { compatible = "bosch,bma222"; reg = <0x08>; - mount-matrix = "0", "1", "0", - "-1", "0", "0", + mount-matrix = "0", "-1", "0", + "1", "0", "0", "0", "0", "1"; vddio-supply = <&ab8500_ldo_aux2_reg>; // 1.8V vdd-supply = <&ab8500_ldo_aux1_reg>; // 3V diff --git a/dts/src/arm/stih407-family.dtsi b/dts/src/arm/stih407-family.dtsi index 1713f78781..5ebb77947f 100644 --- a/dts/src/arm/stih407-family.dtsi +++ b/dts/src/arm/stih407-family.dtsi @@ -137,8 +137,8 @@ }; irq-syscfg { - compatible = "st,stih407-irq-syscfg"; - st,syscfg = <&syscfg_core>; + compatible = "st,stih407-irq-syscfg"; + st,syscfg = <&syscfg_core>; st,irq-device = <ST_IRQ_SYSCFG_PMU_0>, <ST_IRQ_SYSCFG_PMU_1>; st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>, @@ -157,8 +157,8 @@ miphy28lp_phy: miphy28lp { compatible = "st,miphy28lp-phy"; st,syscfg = <&syscfg_core>; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; ranges; phy_port0: port@9b22000 { @@ -208,26 +208,26 @@ }; st231_gp0: st231-gp0 { - compatible = "st,st231-rproc"; - memory-region = <&gp0_reserved>; - resets = <&softreset STIH407_ST231_GP0_SOFTRESET>; - reset-names = "sw_reset"; - clocks = <&clk_s_c0_flexgen CLK_ST231_GP_0>; - clock-frequency = <600000000>; - st,syscfg = <&syscfg_core 0x22c>; + compatible = "st,st231-rproc"; + memory-region = <&gp0_reserved>; + resets = <&softreset STIH407_ST231_GP0_SOFTRESET>; + reset-names = "sw_reset"; + clocks = <&clk_s_c0_flexgen CLK_ST231_GP_0>; + clock-frequency = <600000000>; + st,syscfg = <&syscfg_core 0x22c>; #mbox-cells = <1>; mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx"; mboxes = <&mailbox0 0 2>, <&mailbox2 0 1>, <&mailbox0 0 3>, <&mailbox2 0 0>; }; st231_delta: st231-delta { - compatible = "st,st231-rproc"; - memory-region = <&delta_reserved>; - resets = <&softreset STIH407_ST231_DMU_SOFTRESET>; - reset-names = "sw_reset"; - clocks = <&clk_s_c0_flexgen CLK_ST231_DMU>; - clock-frequency = <600000000>; - st,syscfg = <&syscfg_core 0x224>; + compatible = "st,st231-rproc"; + memory-region = <&delta_reserved>; + resets = <&softreset STIH407_ST231_DMU_SOFTRESET>; + reset-names = "sw_reset"; + clocks = <&clk_s_c0_flexgen CLK_ST231_DMU>; + clock-frequency = <600000000>; + st,syscfg = <&syscfg_core 0x224>; #mbox-cells = <1>; mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx"; mboxes = <&mailbox0 0 0>, <&mailbox3 0 1>, <&mailbox0 0 1>, <&mailbox3 0 0>; @@ -710,78 +710,78 @@ st_dwc3: dwc3@8f94000 { - compatible = "st,stih407-dwc3"; - reg = <0x08f94000 0x1000>, <0x110 0x4>; - reg-names = "reg-glue", "syscfg-reg"; - st,syscfg = <&syscfg_core>; - resets = <&powerdown STIH407_USB3_POWERDOWN>, - <&softreset STIH407_MIPHY2_SOFTRESET>; - reset-names = "powerdown", "softreset"; - #address-cells = <1>; - #size-cells = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb3>; + compatible = "st,stih407-dwc3"; + reg = <0x08f94000 0x1000>, <0x110 0x4>; + reg-names = "reg-glue", "syscfg-reg"; + st,syscfg = <&syscfg_core>; + resets = <&powerdown STIH407_USB3_POWERDOWN>, + <&softreset STIH407_MIPHY2_SOFTRESET>; + reset-names = "powerdown", "softreset"; + #address-cells = <1>; + #size-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb3>; ranges; status = "disabled"; - dwc3: dwc3@9900000 { - compatible = "snps,dwc3"; - reg = <0x09900000 0x100000>; - interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; - dr_mode = "host"; - phy-names = "usb2-phy", "usb3-phy"; - phys = <&usb2_picophy0>, - <&phy_port2 PHY_TYPE_USB3>; + dwc3: usb@9900000 { + compatible = "snps,dwc3"; + reg = <0x09900000 0x100000>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + phy-names = "usb2-phy", "usb3-phy"; + phys = <&usb2_picophy0>, + <&phy_port2 PHY_TYPE_USB3>; snps,dis_u3_susphy_quirk; }; }; /* COMMS PWM Module */ pwm0: pwm@9810000 { - compatible = "st,sti-pwm"; - #pwm-cells = <2>; - reg = <0x9810000 0x68>; - interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm0_chan0_default>; - clock-names = "pwm"; - clocks = <&clk_sysin>; + compatible = "st,sti-pwm"; + #pwm-cells = <2>; + reg = <0x9810000 0x68>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_chan0_default>; + clock-names = "pwm"; + clocks = <&clk_sysin>; st,pwm-num-chan = <1>; - status = "disabled"; + status = "disabled"; }; /* SBC PWM Module */ pwm1: pwm@9510000 { - compatible = "st,sti-pwm"; - #pwm-cells = <2>; - reg = <0x9510000 0x68>; - interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm1_chan0_default - &pinctrl_pwm1_chan1_default - &pinctrl_pwm1_chan2_default - &pinctrl_pwm1_chan3_default>; - clock-names = "pwm"; - clocks = <&clk_sysin>; + compatible = "st,sti-pwm"; + #pwm-cells = <2>; + reg = <0x9510000 0x68>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1_chan0_default + &pinctrl_pwm1_chan1_default + &pinctrl_pwm1_chan2_default + &pinctrl_pwm1_chan3_default>; + clock-names = "pwm"; + clocks = <&clk_sysin>; st,pwm-num-chan = <4>; - status = "disabled"; + status = "disabled"; }; rng10: rng@8a89000 { - compatible = "st,rng"; - reg = <0x08a89000 0x1000>; - clocks = <&clk_sysin>; - status = "okay"; + compatible = "st,rng"; + reg = <0x08a89000 0x1000>; + clocks = <&clk_sysin>; + status = "okay"; }; rng11: rng@8a8a000 { - compatible = "st,rng"; - reg = <0x08a8a000 0x1000>; - clocks = <&clk_sysin>; - status = "okay"; + compatible = "st,rng"; + reg = <0x08a8a000 0x1000>; + clocks = <&clk_sysin>; + status = "okay"; }; ethernet0: dwmac@9630000 { @@ -812,36 +812,36 @@ }; mailbox0: mailbox@8f00000 { - compatible = "st,stih407-mailbox"; - reg = <0x8f00000 0x1000>; - interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; - #mbox-cells = <2>; - mbox-name = "a9"; - status = "okay"; + compatible = "st,stih407-mailbox"; + reg = <0x8f00000 0x1000>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + mbox-name = "a9"; + status = "okay"; }; mailbox1: mailbox@8f01000 { - compatible = "st,stih407-mailbox"; - reg = <0x8f01000 0x1000>; - #mbox-cells = <2>; - mbox-name = "st231_gp_1"; - status = "okay"; + compatible = "st,stih407-mailbox"; + reg = <0x8f01000 0x1000>; + #mbox-cells = <2>; + mbox-name = "st231_gp_1"; + status = "okay"; }; mailbox2: mailbox@8f02000 { - compatible = "st,stih407-mailbox"; - reg = <0x8f02000 0x1000>; - #mbox-cells = <2>; - mbox-name = "st231_gp_0"; - status = "okay"; + compatible = "st,stih407-mailbox"; + reg = <0x8f02000 0x1000>; + #mbox-cells = <2>; + mbox-name = "st231_gp_0"; + status = "okay"; }; mailbox3: mailbox@8f03000 { - compatible = "st,stih407-mailbox"; - reg = <0x8f03000 0x1000>; - #mbox-cells = <2>; - mbox-name = "st231_audio_video"; - status = "okay"; + compatible = "st,stih407-mailbox"; + reg = <0x8f03000 0x1000>; + #mbox-cells = <2>; + mbox-name = "st231_audio_video"; + status = "okay"; }; /* fdma audio */ @@ -913,7 +913,7 @@ dmas = <&fdma0 2 0 1>; dma-names = "tx"; - status = "disabled"; + status = "disabled"; }; sti_uni_player1: sti-uni-player@8d81000 { diff --git a/dts/src/arm/stih407.dtsi b/dts/src/arm/stih407.dtsi index 9e212b0af8..aca43d2bda 100644 --- a/dts/src/arm/stih407.dtsi +++ b/dts/src/arm/stih407.dtsi @@ -13,7 +13,7 @@ #address-cells = <1>; #size-cells = <1>; reg = <0 0>; - assigned-clocks = <&clk_s_d2_quadfs 0>, + assigned-clocks = <&clk_s_d2_quadfs 0>, <&clk_s_d2_quadfs 1>, <&clk_s_c0_pll1 0>, <&clk_s_c0_flexgen CLK_COMPO_DVP>, @@ -106,7 +106,7 @@ reg-names = "hdmi-reg"; #sound-dai-cells = <0>; interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "irq"; + interrupt-names = "irq"; clock-names = "pix", "tmds", "phy", diff --git a/dts/src/arm/stih410.dtsi b/dts/src/arm/stih410.dtsi index ce2f62cf12..a39dd5f7bc 100644 --- a/dts/src/arm/stih410.dtsi +++ b/dts/src/arm/stih410.dtsi @@ -105,7 +105,7 @@ #size-cells = <1>; reg = <0 0>; - assigned-clocks = <&clk_s_d2_quadfs 0>, + assigned-clocks = <&clk_s_d2_quadfs 0>, <&clk_s_d2_quadfs 1>, <&clk_s_c0_pll1 0>, <&clk_s_c0_flexgen CLK_COMPO_DVP>, @@ -198,7 +198,7 @@ reg-names = "hdmi-reg"; #sound-dai-cells = <0>; interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "irq"; + interrupt-names = "irq"; clock-names = "pix", "tmds", "phy", diff --git a/dts/src/arm/stihxxx-b2120.dtsi b/dts/src/arm/stihxxx-b2120.dtsi index 4c72dedcd1..2aa94605d3 100644 --- a/dts/src/arm/stihxxx-b2120.dtsi +++ b/dts/src/arm/stihxxx-b2120.dtsi @@ -175,11 +175,11 @@ /* tsin0 is TSA on NIMA */ tsin0: port { - tsin-num = <0>; + tsin-num = <0>; serial-not-parallel; - i2c-bus = <&ssc2>; - reset-gpios = <&pio15 4 GPIO_ACTIVE_HIGH>; - dvb-card = <STV0367_TDA18212_NIMA_1>; + i2c-bus = <&ssc2>; + reset-gpios = <&pio15 4 GPIO_ACTIVE_HIGH>; + dvb-card = <STV0367_TDA18212_NIMA_1>; }; }; diff --git a/dts/src/arm/stm32429i-eval.dts b/dts/src/arm/stm32429i-eval.dts index 0d98aca017..3de0e9dbe0 100644 --- a/dts/src/arm/stm32429i-eval.dts +++ b/dts/src/arm/stm32429i-eval.dts @@ -251,10 +251,10 @@ &mac { status = "okay"; - pinctrl-0 = <ðernet_mii>; - pinctrl-names = "default"; - phy-mode = "mii"; - phy-handle = <&phy1>; + pinctrl-0 = <ðernet_mii>; + pinctrl-names = "default"; + phy-mode = "mii"; + phy-handle = <&phy1>; mdio0 { #address-cells = <1>; #size-cells = <0>; diff --git a/dts/src/arm/stm32h743.dtsi b/dts/src/arm/stm32h743.dtsi index 91dde07a38..2059593da2 100644 --- a/dts/src/arm/stm32h743.dtsi +++ b/dts/src/arm/stm32h743.dtsi @@ -375,7 +375,7 @@ arm,primecell-periphid = <0x10153180>; reg = <0x52007000 0x1000>; interrupts = <49>; - interrupt-names = "cmd_irq"; + interrupt-names = "cmd_irq"; clocks = <&rcc SDMMC1_CK>; clock-names = "apb_pclk"; resets = <&rcc STM32H7_AHB3_RESET(SDMMC1)>; @@ -389,7 +389,7 @@ arm,primecell-periphid = <0x10153180>; reg = <0x48022400 0x400>; interrupts = <124>; - interrupt-names = "cmd_irq"; + interrupt-names = "cmd_irq"; clocks = <&rcc SDMMC2_CK>; clock-names = "apb_pclk"; resets = <&rcc STM32H7_AHB2_RESET(SDMMC2)>; diff --git a/dts/src/arm/stm32h743i-disco.dts b/dts/src/arm/stm32h743i-disco.dts index 59e01ce103..2b452883a7 100644 --- a/dts/src/arm/stm32h743i-disco.dts +++ b/dts/src/arm/stm32h743i-disco.dts @@ -77,10 +77,10 @@ &mac { status = "disabled"; - pinctrl-0 = <ðernet_rmii>; - pinctrl-names = "default"; - phy-mode = "rmii"; - phy-handle = <&phy0>; + pinctrl-0 = <ðernet_rmii>; + pinctrl-names = "default"; + phy-mode = "rmii"; + phy-handle = <&phy0>; mdio0 { #address-cells = <1>; diff --git a/dts/src/arm/stm32h743i-eval.dts b/dts/src/arm/stm32h743i-eval.dts index 38cc7faf68..5c5d8059bd 100644 --- a/dts/src/arm/stm32h743i-eval.dts +++ b/dts/src/arm/stm32h743i-eval.dts @@ -115,10 +115,10 @@ &mac { status = "disabled"; - pinctrl-0 = <ðernet_rmii>; - pinctrl-names = "default"; - phy-mode = "rmii"; - phy-handle = <&phy0>; + pinctrl-0 = <ðernet_rmii>; + pinctrl-names = "default"; + phy-mode = "rmii"; + phy-handle = <&phy0>; mdio0 { #address-cells = <1>; diff --git a/dts/src/arm/stm32h750i-art-pi.dts b/dts/src/arm/stm32h750i-art-pi.dts index 9bb73bb619..f3e70d3b65 100644 --- a/dts/src/arm/stm32h750i-art-pi.dts +++ b/dts/src/arm/stm32h750i-art-pi.dts @@ -126,10 +126,10 @@ &mac { status = "disabled"; - pinctrl-0 = <ðernet_rmii>; - pinctrl-names = "default"; - phy-mode = "rmii"; - phy-handle = <&phy0>; + pinctrl-0 = <ðernet_rmii>; + pinctrl-names = "default"; + phy-mode = "rmii"; + phy-handle = <&phy0>; mdio0 { #address-cells = <1>; diff --git a/dts/src/arm/stm32mp131.dtsi b/dts/src/arm/stm32mp131.dtsi index f9ebc47e64..3a921db23e 100644 --- a/dts/src/arm/stm32mp131.dtsi +++ b/dts/src/arm/stm32mp131.dtsi @@ -4,6 +4,8 @@ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics. */ #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/stm32mp13-clks.h> +#include <dt-bindings/reset/stm32mp13-resets.h> / { #address-cells = <1>; @@ -27,59 +29,28 @@ interrupt-parent = <&intc>; }; - clocks { - clk_axi: clk-axi { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <266500000>; + firmware { + optee { + method = "smc"; + compatible = "linaro,optee-tz"; }; - clk_hse: clk-hse { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <24000000>; - }; - - clk_hsi: clk-hsi { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <64000000>; - }; - - clk_lsi: clk-lsi { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <32000>; - }; - - clk_pclk3: clk-pclk3 { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <104438965>; - }; - - clk_pclk4: clk-pclk4 { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <133250000>; - }; - - clk_pll4_p: clk-pll4_p { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <50000000>; - }; + scmi: scmi { + compatible = "linaro,scmi-optee"; + #address-cells = <1>; + #size-cells = <0>; + linaro,optee-channel-id = <0>; + shmem = <&scmi_shm>; - clk_pll4_r: clk-pll4_r { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <99000000>; - }; + scmi_clk: protocol@14 { + reg = <0x14>; + #clock-cells = <1>; + }; - clk_rtc_k: clk-rtc-k { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <32768>; + scmi_reset: protocol@16 { + reg = <0x16>; + #reset-cells = <1>; + }; }; }; @@ -113,11 +84,25 @@ interrupt-parent = <&intc>; ranges; + scmi_sram: sram@2ffff000 { + compatible = "mmio-sram"; + reg = <0x2ffff000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x2ffff000 0x1000>; + + scmi_shm: scmi-sram@0 { + compatible = "arm,scmi-shmem"; + reg = <0 0x80>; + }; + }; + uart4: serial@40010000 { compatible = "st,stm32h7-uart"; reg = <0x40010000 0x400>; interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_hsi>; + clocks = <&rcc UART4_K>; + resets = <&rcc UART4_R>; status = "disabled"; }; @@ -132,7 +117,8 @@ <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_pclk4>; + clocks = <&rcc DMA1>; + resets = <&rcc DMA1_R>; #dma-cells = <4>; st,mem2mem; dma-requests = <8>; @@ -149,7 +135,8 @@ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_pclk4>; + clocks = <&rcc DMA2>; + resets = <&rcc DMA2_R>; #dma-cells = <4>; st,mem2mem; dma-requests = <8>; @@ -158,13 +145,27 @@ dmamux1: dma-router@48002000 { compatible = "st,stm32h7-dmamux"; reg = <0x48002000 0x40>; - clocks = <&clk_pclk4>; + clocks = <&rcc DMAMUX1>; + resets = <&rcc DMAMUX1_R>; #dma-cells = <3>; dma-masters = <&dma1 &dma2>; dma-requests = <128>; dma-channels = <16>; }; + rcc: rcc@50000000 { + compatible = "st,stm32mp13-rcc", "syscon"; + reg = <0x50000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + clock-names = "hse", "hsi", "csi", "lse", "lsi"; + clocks = <&scmi_clk CK_SCMI_HSE>, + <&scmi_clk CK_SCMI_HSI>, + <&scmi_clk CK_SCMI_CSI>, + <&scmi_clk CK_SCMI_LSE>, + <&scmi_clk CK_SCMI_LSI>; + }; + exti: interrupt-controller@5000d000 { compatible = "st,stm32mp13-exti", "syscon"; interrupt-controller; @@ -175,14 +176,14 @@ syscfg: syscon@50020000 { compatible = "st,stm32mp157-syscfg", "syscon"; reg = <0x50020000 0x400>; - clocks = <&clk_pclk3>; + clocks = <&rcc SYSCFG>; }; mdma: dma-controller@58000000 { compatible = "st,stm32h7-mdma"; reg = <0x58000000 0x1000>; interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_pclk4>; + clocks = <&rcc MDMA>; #dma-cells = <5>; dma-channels = <32>; dma-requests = <48>; @@ -194,8 +195,9 @@ reg = <0x58005000 0x1000>, <0x58006000 0x1000>; interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "cmd_irq"; - clocks = <&clk_pll4_p>; + clocks = <&rcc SDMMC1_K>; clock-names = "apb_pclk"; + resets = <&rcc SDMMC1_R>; cap-sd-highspeed; cap-mmc-highspeed; max-frequency = <130000000>; @@ -208,8 +210,9 @@ reg = <0x58007000 0x1000>, <0x58008000 0x1000>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "cmd_irq"; - clocks = <&clk_pll4_p>; + clocks = <&rcc SDMMC2_K>; clock-names = "apb_pclk"; + resets = <&rcc SDMMC2_R>; cap-sd-highspeed; cap-mmc-highspeed; max-frequency = <130000000>; @@ -219,7 +222,7 @@ iwdg2: watchdog@5a002000 { compatible = "st,stm32mp1-iwdg"; reg = <0x5a002000 0x400>; - clocks = <&clk_pclk4>, <&clk_lsi>; + clocks = <&rcc IWDG2>, <&scmi_clk CK_SCMI_LSI>; clock-names = "pclk", "lsi"; status = "disabled"; }; @@ -228,7 +231,8 @@ compatible = "st,stm32mp1-rtc"; reg = <0x5c004000 0x400>; interrupts-extended = <&exti 19 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_pclk4>, <&clk_rtc_k>; + clocks = <&scmi_clk CK_SCMI_RTCAPB>, + <&scmi_clk CK_SCMI_RTC>; clock-names = "pclk", "rtc_ck"; status = "disabled"; }; @@ -269,7 +273,7 @@ interrupt-controller; #interrupt-cells = <2>; reg = <0x0 0x400>; - clocks = <&clk_pclk4>; + clocks = <&rcc GPIOA>; st,bank-name = "GPIOA"; ngpios = <16>; gpio-ranges = <&pinctrl 0 0 16>; @@ -281,7 +285,7 @@ interrupt-controller; #interrupt-cells = <2>; reg = <0x1000 0x400>; - clocks = <&clk_pclk4>; + clocks = <&rcc GPIOB>; st,bank-name = "GPIOB"; ngpios = <16>; gpio-ranges = <&pinctrl 0 16 16>; @@ -293,7 +297,7 @@ interrupt-controller; #interrupt-cells = <2>; reg = <0x2000 0x400>; - clocks = <&clk_pclk4>; + clocks = <&rcc GPIOC>; st,bank-name = "GPIOC"; ngpios = <16>; gpio-ranges = <&pinctrl 0 32 16>; @@ -305,7 +309,7 @@ interrupt-controller; #interrupt-cells = <2>; reg = <0x3000 0x400>; - clocks = <&clk_pclk4>; + clocks = <&rcc GPIOD>; st,bank-name = "GPIOD"; ngpios = <16>; gpio-ranges = <&pinctrl 0 48 16>; @@ -317,7 +321,7 @@ interrupt-controller; #interrupt-cells = <2>; reg = <0x4000 0x400>; - clocks = <&clk_pclk4>; + clocks = <&rcc GPIOE>; st,bank-name = "GPIOE"; ngpios = <16>; gpio-ranges = <&pinctrl 0 64 16>; @@ -329,7 +333,7 @@ interrupt-controller; #interrupt-cells = <2>; reg = <0x5000 0x400>; - clocks = <&clk_pclk4>; + clocks = <&rcc GPIOF>; st,bank-name = "GPIOF"; ngpios = <16>; gpio-ranges = <&pinctrl 0 80 16>; @@ -341,7 +345,7 @@ interrupt-controller; #interrupt-cells = <2>; reg = <0x6000 0x400>; - clocks = <&clk_pclk4>; + clocks = <&rcc GPIOG>; st,bank-name = "GPIOG"; ngpios = <16>; gpio-ranges = <&pinctrl 0 96 16>; @@ -353,7 +357,7 @@ interrupt-controller; #interrupt-cells = <2>; reg = <0x7000 0x400>; - clocks = <&clk_pclk4>; + clocks = <&rcc GPIOH>; st,bank-name = "GPIOH"; ngpios = <15>; gpio-ranges = <&pinctrl 0 112 15>; @@ -365,7 +369,7 @@ interrupt-controller; #interrupt-cells = <2>; reg = <0x8000 0x400>; - clocks = <&clk_pclk4>; + clocks = <&rcc GPIOI>; st,bank-name = "GPIOI"; ngpios = <8>; gpio-ranges = <&pinctrl 0 128 8>; diff --git a/dts/src/arm/stm32mp133.dtsi b/dts/src/arm/stm32mp133.dtsi index 0fb1386257..531c263c9f 100644 --- a/dts/src/arm/stm32mp133.dtsi +++ b/dts/src/arm/stm32mp133.dtsi @@ -15,7 +15,7 @@ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "int0", "int1"; - clocks = <&clk_hse>, <&clk_pll4_r>; + clocks = <&scmi_clk CK_SCMI_HSE>, <&rcc FDCAN_K>; clock-names = "hclk", "cclk"; bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>; status = "disabled"; @@ -28,7 +28,7 @@ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "int0", "int1"; - clocks = <&clk_hse>, <&clk_pll4_r>; + clocks = <&scmi_clk CK_SCMI_HSE>, <&rcc FDCAN_K>; clock-names = "hclk", "cclk"; bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>; status = "disabled"; diff --git a/dts/src/arm/stm32mp135f-dk.dts b/dts/src/arm/stm32mp135f-dk.dts index 09d6226d59..e6b8ffd332 100644 --- a/dts/src/arm/stm32mp135f-dk.dts +++ b/dts/src/arm/stm32mp135f-dk.dts @@ -26,6 +26,17 @@ reg = <0xc0000000 0x20000000>; }; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + optee@dd000000 { + reg = <0xdd000000 0x3000000>; + no-map; + }; + }; + gpio-keys { compatible = "gpio-keys"; diff --git a/dts/src/arm/stm32mp13xc.dtsi b/dts/src/arm/stm32mp13xc.dtsi index fa6889e305..4d00e75928 100644 --- a/dts/src/arm/stm32mp13xc.dtsi +++ b/dts/src/arm/stm32mp13xc.dtsi @@ -10,7 +10,8 @@ compatible = "st,stm32mp1-cryp"; reg = <0x54002000 0x400>; interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_axi>; + clocks = <&rcc CRYP1>; + resets = <&rcc CRYP1_R>; status = "disabled"; }; }; diff --git a/dts/src/arm/stm32mp13xf.dtsi b/dts/src/arm/stm32mp13xf.dtsi index fa6889e305..4d00e75928 100644 --- a/dts/src/arm/stm32mp13xf.dtsi +++ b/dts/src/arm/stm32mp13xf.dtsi @@ -10,7 +10,8 @@ compatible = "st,stm32mp1-cryp"; reg = <0x54002000 0x400>; interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_axi>; + clocks = <&rcc CRYP1>; + resets = <&rcc CRYP1_R>; status = "disabled"; }; }; diff --git a/dts/src/arm/stm32mp15-pinctrl.dtsi b/dts/src/arm/stm32mp15-pinctrl.dtsi index 6052243ad8..2cc9341d43 100644 --- a/dts/src/arm/stm32mp15-pinctrl.dtsi +++ b/dts/src/arm/stm32mp15-pinctrl.dtsi @@ -151,6 +151,43 @@ }; }; + dcmi_pins_c: dcmi-2 { + pins { + pinmux = <STM32_PINMUX('A', 4, AF13)>,/* DCMI_HSYNC */ + <STM32_PINMUX('B', 7, AF13)>,/* DCMI_VSYNC */ + <STM32_PINMUX('A', 6, AF13)>,/* DCMI_PIXCLK */ + <STM32_PINMUX('A', 9, AF13)>,/* DCMI_D0 */ + <STM32_PINMUX('H', 10, AF13)>,/* DCMI_D1 */ + <STM32_PINMUX('E', 0, AF13)>,/* DCMI_D2 */ + <STM32_PINMUX('E', 1, AF13)>,/* DCMI_D3 */ + <STM32_PINMUX('H', 14, AF13)>,/* DCMI_D4 */ + <STM32_PINMUX('I', 4, AF13)>,/* DCMI_D5 */ + <STM32_PINMUX('I', 6, AF13)>,/* DCMI_D6 */ + <STM32_PINMUX('E', 6, AF13)>,/* DCMI_D7 */ + <STM32_PINMUX('I', 1, AF13)>,/* DCMI_D8 */ + <STM32_PINMUX('H', 7, AF13)>;/* DCMI_D9 */ + bias-pull-up; + }; + }; + + dcmi_sleep_pins_c: dcmi-sleep-2 { + pins { + pinmux = <STM32_PINMUX('A', 4, ANALOG)>,/* DCMI_HSYNC */ + <STM32_PINMUX('B', 7, ANALOG)>,/* DCMI_VSYNC */ + <STM32_PINMUX('A', 6, ANALOG)>,/* DCMI_PIXCLK */ + <STM32_PINMUX('A', 9, ANALOG)>,/* DCMI_D0 */ + <STM32_PINMUX('H', 10, ANALOG)>,/* DCMI_D1 */ + <STM32_PINMUX('E', 0, ANALOG)>,/* DCMI_D2 */ + <STM32_PINMUX('E', 1, ANALOG)>,/* DCMI_D3 */ + <STM32_PINMUX('H', 14, ANALOG)>,/* DCMI_D4 */ + <STM32_PINMUX('I', 4, ANALOG)>,/* DCMI_D5 */ + <STM32_PINMUX('I', 6, ANALOG)>,/* DCMI_D6 */ + <STM32_PINMUX('E', 6, ANALOG)>,/* DCMI_D7 */ + <STM32_PINMUX('I', 1, ANALOG)>,/* DCMI_D8 */ + <STM32_PINMUX('H', 7, ANALOG)>;/* DCMI_D9 */ + }; + }; + ethernet0_rgmii_pins_a: rgmii-0 { pins1 { pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */ @@ -923,6 +960,21 @@ }; }; + mco1_pins_a: mco1-0 { + pins { + pinmux = <STM32_PINMUX('A', 13, AF2)>; /* MCO1 */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + }; + + mco1_sleep_pins_a: mco1-sleep-0 { + pins { + pinmux = <STM32_PINMUX('A', 13, ANALOG)>; /* MCO1 */ + }; + }; + mco2_pins_a: mco2-0 { pins { pinmux = <STM32_PINMUX('G', 2, AF1)>; /* MCO2 */ @@ -978,6 +1030,26 @@ }; }; + m_can1_pins_c: m-can1-2 { + pins1 { + pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('H', 14, AF9)>; /* CAN1_RX */ + bias-disable; + }; + }; + + m_can1_sleep_pins_c: m_can1-sleep-2 { + pins { + pinmux = <STM32_PINMUX('H', 13, ANALOG)>, /* CAN1_TX */ + <STM32_PINMUX('H', 14, ANALOG)>; /* CAN1_RX */ + }; + }; + m_can2_pins_a: m-can2-0 { pins1 { pinmux = <STM32_PINMUX('B', 13, AF9)>; /* CAN2_TX */ @@ -1794,15 +1866,30 @@ spi2_pins_a: spi2-0 { pins1 { - pinmux = <STM32_PINMUX('B', 10, AF5)>, /* SPI1_SCK */ - <STM32_PINMUX('I', 3, AF5)>; /* SPI1_MOSI */ + pinmux = <STM32_PINMUX('B', 10, AF5)>, /* SPI2_SCK */ + <STM32_PINMUX('I', 3, AF5)>; /* SPI2_MOSI */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + + pins2 { + pinmux = <STM32_PINMUX('I', 2, AF5)>; /* SPI2_MISO */ + bias-disable; + }; + }; + + spi2_pins_b: spi2-1 { + pins1 { + pinmux = <STM32_PINMUX('I', 1, AF5)>, /* SPI2_SCK */ + <STM32_PINMUX('I', 3, AF5)>; /* SPI2_MOSI */ bias-disable; drive-push-pull; slew-rate = <1>; }; pins2 { - pinmux = <STM32_PINMUX('I', 2, AF5)>; /* SPI1_MISO */ + pinmux = <STM32_PINMUX('I', 2, AF5)>; /* SPI2_MISO */ bias-disable; }; }; @@ -1884,6 +1971,49 @@ }; }; + uart4_pins_d: uart4-3 { + pins1 { + pinmux = <STM32_PINMUX('A', 13, AF8)>; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */ + bias-disable; + }; + }; + + uart4_idle_pins_d: uart4-idle-3 { + pins1 { + pinmux = <STM32_PINMUX('A', 13, ANALOG)>; /* UART4_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */ + bias-disable; + }; + }; + + uart4_sleep_pins_d: uart4-sleep-3 { + pins { + pinmux = <STM32_PINMUX('A', 13, ANALOG)>, /* UART4_TX */ + <STM32_PINMUX('B', 2, ANALOG)>; /* UART4_RX */ + }; + }; + + uart5_pins_a: uart5-0 { + pins1 { + pinmux = <STM32_PINMUX('B', 13, AF14)>; /* UART5_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('B', 5, AF12)>; /* UART5_RX */ + bias-disable; + }; + }; + uart7_pins_a: uart7-0 { pins1 { pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART7_TX */ @@ -2183,6 +2313,47 @@ }; }; + usart3_pins_e: usart3-4 { + pins1 { + pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */ + <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('B', 11, AF7)>, /* USART3_RX */ + <STM32_PINMUX('D', 11, AF7)>; /* USART3_CTS_NSS */ + bias-pull-up; + }; + }; + + usart3_idle_pins_e: usart3-idle-4 { + pins1 { + pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */ + <STM32_PINMUX('D', 11, ANALOG)>; /* USART3_CTS_NSS */ + }; + pins2 { + pinmux = <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins3 { + pinmux = <STM32_PINMUX('B', 11, AF7)>; /* USART3_RX */ + bias-pull-up; + }; + }; + + usart3_sleep_pins_e: usart3-sleep-4 { + pins { + pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */ + <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */ + <STM32_PINMUX('D', 11, ANALOG)>, /* USART3_CTS_NSS */ + <STM32_PINMUX('B', 11, ANALOG)>; /* USART3_RX */ + }; + }; + usbotg_hs_pins_a: usbotg-hs-0 { pins { pinmux = <STM32_PINMUX('A', 10, ANALOG)>; /* OTG_ID */ diff --git a/dts/src/arm/stm32mp151.dtsi b/dts/src/arm/stm32mp151.dtsi index e04dda5ddd..742fdeeff4 100644 --- a/dts/src/arm/stm32mp151.dtsi +++ b/dts/src/arm/stm32mp151.dtsi @@ -1117,10 +1117,9 @@ reg = <0x4c001000 0x400>; st,proc-id = <0>; interrupts-extended = - <&intc GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, - <&intc GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, - <&exti 61 1>; - interrupt-names = "rx", "tx", "wakeup"; + <&exti 61 1>, + <&intc GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "rx", "tx"; clocks = <&rcc IPCC>; wakeup-source; status = "disabled"; diff --git a/dts/src/arm/stm32mp153c-dhcor-drc-compact.dts b/dts/src/arm/stm32mp153c-dhcor-drc-compact.dts new file mode 100644 index 0000000000..c8b9818499 --- /dev/null +++ b/dts/src/arm/stm32mp153c-dhcor-drc-compact.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) +/* + * Copyright (C) 2022 Marek Vasut <marex@denx.de> + * + * DHCOR STM32MP1 variant: + * DHCR-STM32MP153C-C065-R051-V33-SPI-I-01LG + * DHCOR PCB number: 586-100 or newer + * DRC Compact PCB number: 627-100 or newer + */ + +/dts-v1/; + +#include "stm32mp153.dtsi" +#include "stm32mp15xc.dtsi" +#include "stm32mp15xx-dhcor-som.dtsi" +#include "stm32mp15xx-dhcor-drc-compact.dtsi" + +/ { + model = "DH electronics STM32MP153C DHCOR DRC Compact"; + compatible = "dh,stm32mp153c-dhcor-drc-compact", + "dh,stm32mp153c-dhcor-som", + "st,stm32mp153"; +}; + +&m_can1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&m_can1_pins_c>; + pinctrl-1 = <&m_can1_sleep_pins_c>; + status = "okay"; +}; diff --git a/dts/src/arm/stm32mp15xx-dhcor-avenger96.dtsi b/dts/src/arm/stm32mp15xx-dhcor-avenger96.dtsi index 76c54b006d..90933077d6 100644 --- a/dts/src/arm/stm32mp15xx-dhcor-avenger96.dtsi +++ b/dts/src/arm/stm32mp15xx-dhcor-avenger96.dtsi @@ -126,6 +126,22 @@ }; }; +&dcmi { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&dcmi_pins_c>; + pinctrl-1 = <&dcmi_sleep_pins_c>; + status = "disabled"; + + port { + dcmi_0: endpoint { + remote-endpoint = <&stmipi_2>; + bus-type = <5>; + bus-width = <8>; + pclk-sample = <0>; + }; + }; +}; + ðernet0 { status = "okay"; pinctrl-0 = <ðernet0_rgmii_pins_c>; @@ -219,6 +235,45 @@ }; &i2c4 { + stmipi: stmipi@14 { + compatible = "st,st-mipid02"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mco1_pins_a>; + pinctrl-1 = <&mco1_sleep_pins_a>; + reg = <0x14>; + clocks = <&rcc CK_MCO1>; + clock-names = "xclk"; + assigned-clocks = <&rcc CK_MCO1>; + assigned-clock-parents = <&rcc CK_HSE>; + assigned-clock-rates = <24000000>; + VDDE-supply = <&v1v8>; + VDDIN-supply = <&v1v8>; + reset-gpios = <&gpioz 0 GPIO_ACTIVE_LOW>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + stmipi_0: endpoint { + }; + }; + + port@2 { + reg = <2>; + stmipi_2: endpoint { + bus-width = <8>; + hsync-active = <0>; + vsync-active = <0>; + pclk-sample = <0>; + remote-endpoint = <&dcmi_0>; + }; + }; + }; + }; + hdmi-transmitter@3d { compatible = "adi,adv7513"; reg = <0x3d>, <0x4d>, <0x2d>, <0x5d>; diff --git a/dts/src/arm/stm32mp15xx-dhcor-drc-compact.dtsi b/dts/src/arm/stm32mp15xx-dhcor-drc-compact.dtsi new file mode 100644 index 0000000000..27477bb219 --- /dev/null +++ b/dts/src/arm/stm32mp15xx-dhcor-drc-compact.dtsi @@ -0,0 +1,322 @@ +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) +/* + * Copyright (C) 2022 Marek Vasut <marex@denx.de> + */ + +/ { + aliases { + ethernet0 = ðernet0; + ethernet1 = &ksz8851; + mmc0 = &sdmmc1; + rtc0 = &hwrtc; + rtc1 = &rtc; + serial0 = &uart4; + serial1 = &uart8; + serial2 = &usart3; + serial3 = &uart5; + spi0 = &qspi; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + led { + compatible = "gpio-leds"; + led1 { + label = "yellow:user0"; + gpios = <&gpioz 6 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led2 { + label = "red:user1"; + gpios = <&gpioz 3 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; + + ethernet_vio: vioregulator { + compatible = "regulator-fixed"; + regulator-name = "vio"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpioh 2 GPIO_ACTIVE_LOW>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd>; + }; +}; + +&adc { /* X11 ADC inputs */ + pinctrl-names = "default"; + pinctrl-0 = <&adc12_ain_pins_b>; + vdd-supply = <&vdd>; + vdda-supply = <&vdda>; + vref-supply = <&vdda>; + status = "okay"; + + adc1: adc@0 { + st,adc-channels = <0 1 6>; + st,min-sample-time-nsecs = <5000>; + status = "okay"; + }; + + adc2: adc@100 { + st,adc-channels = <0 1 2>; + st,min-sample-time-nsecs = <5000>; + status = "okay"; + }; +}; + +ðernet0 { + status = "okay"; + pinctrl-0 = <ðernet0_rgmii_pins_c>; + pinctrl-1 = <ðernet0_rgmii_sleep_pins_c>; + pinctrl-names = "default", "sleep"; + phy-mode = "rgmii"; + max-speed = <1000>; + phy-handle = <&phy0>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + reset-gpios = <&gpioz 2 GPIO_ACTIVE_LOW>; + reset-delay-us = <1000>; + reset-post-delay-us = <1000>; + + phy0: ethernet-phy@7 { + reg = <7>; + + rxc-skew-ps = <1500>; + rxdv-skew-ps = <540>; + rxd0-skew-ps = <420>; + rxd1-skew-ps = <420>; + rxd2-skew-ps = <420>; + rxd3-skew-ps = <420>; + + txc-skew-ps = <1440>; + txen-skew-ps = <540>; + txd0-skew-ps = <420>; + txd1-skew-ps = <420>; + txd2-skew-ps = <420>; + txd3-skew-ps = <420>; + }; + }; +}; + +&fmc { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&fmc_pins_b>; + pinctrl-1 = <&fmc_sleep_pins_b>; + status = "okay"; + + ksz8851: ethernet@1,0 { + compatible = "micrel,ks8851-mll"; + reg = <1 0x0 0x2>, <1 0x2 0x20000>; + interrupt-parent = <&gpioc>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + bank-width = <2>; + + /* Timing values are in nS */ + st,fmc2-ebi-cs-mux-enable; + st,fmc2-ebi-cs-transaction-type = <4>; + st,fmc2-ebi-cs-buswidth = <16>; + st,fmc2-ebi-cs-address-setup-ns = <5>; + st,fmc2-ebi-cs-address-hold-ns = <5>; + st,fmc2-ebi-cs-bus-turnaround-ns = <5>; + st,fmc2-ebi-cs-data-setup-ns = <45>; + st,fmc2-ebi-cs-data-hold-ns = <1>; + st,fmc2-ebi-cs-write-address-setup-ns = <5>; + st,fmc2-ebi-cs-write-address-hold-ns = <5>; + st,fmc2-ebi-cs-write-bus-turnaround-ns = <5>; + st,fmc2-ebi-cs-write-data-setup-ns = <45>; + st,fmc2-ebi-cs-write-data-hold-ns = <1>; + }; +}; + +&gpioa { + gpio-line-names = "", "", "", "", + "DRCC-VAR2", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpioe { + gpio-line-names = "", "", "", "", + "", "DRCC-GPIO0", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpiog { + gpio-line-names = "", "", "", "", + "", "", "", "", + "", "", "", "", + "DRCC-GPIO5", "", "", ""; +}; + +&gpioh { + gpio-line-names = "", "", "", "DRCC-HW2", + "DRCC-GPIO4", "", "", "", + "DRCC-HW1", "DRCC-HW0", "", "DRCC-VAR1", + "DRCC-VAR0", "", "", "DRCC-GPIO6"; +}; + +&gpioi { + gpio-line-names = "", "", "", "", + "", "", "", "DRCC-GPIO2", + "", "DRCC-GPIO1", "", "", + "", "", "", ""; +}; + +&i2c1 { /* X11 I2C1 */ + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_b>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /delete-property/dmas; + /delete-property/dma-names; +}; + +&i2c4 { + hwrtc: rtc@32 { + compatible = "microcrystal,rv8803"; + reg = <0x32>; + }; + + eeprom@50 { + compatible = "atmel,24c04"; + reg = <0x50>; + pagesize = <16>; + }; +}; + +&sdmmc1 { /* MicroSD */ + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; + cd-gpios = <&gpioi 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + disable-wp; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&vdd>; + vqmmc-supply = <&vdd>; + status = "okay"; +}; + +&sdmmc2 { /* eMMC */ + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_c>; + pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_c>; + pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_c>; + bus-width = <8>; + no-sd; + no-sdio; + non-removable; + st,neg-edge; + vmmc-supply = <&v3v3>; + vqmmc-supply = <&vdd>; + status = "okay"; +}; + +&sdmmc3 { /* SDIO Wi-Fi */ + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc3_b4_pins_a>; + pinctrl-1 = <&sdmmc3_b4_od_pins_a>; + pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>; + broken-cd; + bus-width = <4>; + mmc-ddr-3_3v; + st,neg-edge; + vmmc-supply = <&v3v3>; + vqmmc-supply = <&v3v3>; + status = "okay"; +}; + +&spi2 { /* X11 SPI */ + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_b>; + cs-gpios = <&gpioi 0 0>; + status = "disabled"; + /delete-property/dmas; + /delete-property/dma-names; +}; + +&uart4 { + label = "UART0"; + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_d>; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; +}; + +&uart5 { /* X11 UART */ + label = "X11-UART5"; + pinctrl-names = "default"; + pinctrl-0 = <&uart5_pins_a>; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; +}; + +&uart8 { + label = "RS485-1"; + pinctrl-names = "default"; + pinctrl-0 = <&uart8_pins_a &uart8_rtscts_pins_a>; + uart-has-rtscts; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; +}; + +&usart3 { /* RS485 or RS232 */ + label = "RS485-2"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&usart3_pins_e>; + pinctrl-1 = <&usart3_sleep_pins_e>; + uart-has-rtscts; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; +}; + +&usbh_ehci { + phys = <&usbphyc_port0>; + status = "okay"; +}; + +&usbh_ohci { + phys = <&usbphyc_port0>; + status = "okay"; +}; + +&usbotg_hs { + dr_mode = "otg"; + pinctrl-0 = <&usbotg_hs_pins_a>; + pinctrl-names = "default"; + phy-names = "usb2-phy"; + phys = <&usbphyc_port1 0>; + vbus-supply = <&vbus_otg>; + status = "okay"; +}; + +&usbphyc { + status = "okay"; +}; + +&usbphyc_port0 { + phy-supply = <&vdd_usb>; + connector { + compatible = "usb-a-connector"; + vbus-supply = <&vbus_sw>; + }; +}; + +&usbphyc_port1 { + phy-supply = <&vdd_usb>; +}; diff --git a/dts/src/arm/stm32mp15xx-dhcor-io1v8.dtsi b/dts/src/arm/stm32mp15xx-dhcor-io1v8.dtsi index 75172314d7..9937b28548 100644 --- a/dts/src/arm/stm32mp15xx-dhcor-io1v8.dtsi +++ b/dts/src/arm/stm32mp15xx-dhcor-io1v8.dtsi @@ -18,6 +18,11 @@ }; }; +&vdd { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; +}; + &pwr_regulators { vdd-supply = <&vdd_io>; }; diff --git a/dts/src/arm/stm32mp15xx-dhcor-som.dtsi b/dts/src/arm/stm32mp15xx-dhcor-som.dtsi index 6336c3ca0f..134a798ad3 100644 --- a/dts/src/arm/stm32mp15xx-dhcor-som.dtsi +++ b/dts/src/arm/stm32mp15xx-dhcor-som.dtsi @@ -119,8 +119,8 @@ vdd: buck3 { regulator-name = "vdd"; - regulator-min-microvolt = <2900000>; - regulator-max-microvolt = <2900000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-always-on; regulator-initial-mode = <0>; regulator-over-current-protection; diff --git a/dts/src/arm/stm32mp15xx-dkx.dtsi b/dts/src/arm/stm32mp15xx-dkx.dtsi index 333c2af971..8b48d3c89a 100644 --- a/dts/src/arm/stm32mp15xx-dkx.dtsi +++ b/dts/src/arm/stm32mp15xx-dkx.dtsi @@ -677,6 +677,14 @@ &usbh_ehci { phys = <&usbphyc_port0>; status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + /* onboard HUB */ + hub@1 { + compatible = "usb424,2514"; + reg = <1>; + vdd-supply = <&v3v3>; + }; }; &usbotg_hs { diff --git a/dts/src/arm/stm32mp15xx-osd32.dtsi b/dts/src/arm/stm32mp15xx-osd32.dtsi index 6706d8311a..935b7084b5 100644 --- a/dts/src/arm/stm32mp15xx-osd32.dtsi +++ b/dts/src/arm/stm32mp15xx-osd32.dtsi @@ -50,12 +50,6 @@ no-map; }; }; - - reg_sip_eeprom: regulator_eeprom { - compatible = "regulator-fixed"; - regulator-name = "sip_eeprom"; - regulator-always-on; - }; }; &i2c4 { @@ -78,6 +72,7 @@ compatible = "st,stpmic1-regulators"; ldo1-supply = <&v3v3>; + ldo3-supply = <&vdd_ddr>; ldo6-supply = <&v3v3>; pwr_sw1-supply = <&bst_out>; @@ -203,7 +198,7 @@ sip_eeprom: eeprom@50 { compatible = "atmel,24c32"; - vcc-supply = <®_sip_eeprom>; + vcc-supply = <&vdd>; reg = <0x50>; }; }; diff --git a/dts/src/arm/sun4i-a10-inet9f-rev03.dts b/dts/src/arm/sun4i-a10-inet9f-rev03.dts index 0a562b2cc5..62e7aa587f 100644 --- a/dts/src/arm/sun4i-a10-inet9f-rev03.dts +++ b/dts/src/arm/sun4i-a10-inet9f-rev03.dts @@ -63,7 +63,7 @@ compatible = "gpio-keys-polled"; poll-interval = <20>; - left-joystick-left { + event-left-joystick-left { label = "Left Joystick Left"; linux,code = <ABS_X>; linux,input-type = <EV_ABS>; @@ -71,7 +71,7 @@ gpios = <&pio 0 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA6 */ }; - left-joystick-right { + event-left-joystick-right { label = "Left Joystick Right"; linux,code = <ABS_X>; linux,input-type = <EV_ABS>; @@ -79,7 +79,7 @@ gpios = <&pio 0 5 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA5 */ }; - left-joystick-up { + event-left-joystick-up { label = "Left Joystick Up"; linux,code = <ABS_Y>; linux,input-type = <EV_ABS>; @@ -87,7 +87,7 @@ gpios = <&pio 0 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA8 */ }; - left-joystick-down { + event-left-joystick-down { label = "Left Joystick Down"; linux,code = <ABS_Y>; linux,input-type = <EV_ABS>; @@ -95,7 +95,7 @@ gpios = <&pio 0 9 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA9 */ }; - right-joystick-left { + event-right-joystick-left { label = "Right Joystick Left"; linux,code = <ABS_Z>; linux,input-type = <EV_ABS>; @@ -103,7 +103,7 @@ gpios = <&pio 0 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA1 */ }; - right-joystick-right { + event-right-joystick-right { label = "Right Joystick Right"; linux,code = <ABS_Z>; linux,input-type = <EV_ABS>; @@ -111,7 +111,7 @@ gpios = <&pio 0 0 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA0 */ }; - right-joystick-up { + event-right-joystick-up { label = "Right Joystick Up"; linux,code = <ABS_RZ>; linux,input-type = <EV_ABS>; @@ -119,7 +119,7 @@ gpios = <&pio 0 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA3 */ }; - right-joystick-down { + event-right-joystick-down { label = "Right Joystick Down"; linux,code = <ABS_RZ>; linux,input-type = <EV_ABS>; @@ -127,7 +127,7 @@ gpios = <&pio 0 4 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA4 */ }; - dpad-left { + event-dpad-left { label = "DPad Left"; linux,code = <ABS_HAT0X>; linux,input-type = <EV_ABS>; @@ -135,7 +135,7 @@ gpios = <&pio 7 23 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH23 */ }; - dpad-right { + event-dpad-right { label = "DPad Right"; linux,code = <ABS_HAT0X>; linux,input-type = <EV_ABS>; @@ -143,7 +143,7 @@ gpios = <&pio 7 24 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH24 */ }; - dpad-up { + event-dpad-up { label = "DPad Up"; linux,code = <ABS_HAT0Y>; linux,input-type = <EV_ABS>; @@ -151,7 +151,7 @@ gpios = <&pio 7 25 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH25 */ }; - dpad-down { + event-dpad-down { label = "DPad Down"; linux,code = <ABS_HAT0Y>; linux,input-type = <EV_ABS>; @@ -159,49 +159,49 @@ gpios = <&pio 7 26 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH26 */ }; - x { + event-x { label = "Button X"; linux,code = <BTN_X>; gpios = <&pio 0 16 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA16 */ }; - y { + event-y { label = "Button Y"; linux,code = <BTN_Y>; gpios = <&pio 0 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA14 */ }; - a { + event-a { label = "Button A"; linux,code = <BTN_A>; gpios = <&pio 0 17 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA17 */ }; - b { + event-b { label = "Button B"; linux,code = <BTN_B>; gpios = <&pio 0 15 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA15 */ }; - select { + event-select { label = "Select Button"; linux,code = <BTN_SELECT>; gpios = <&pio 0 11 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA11 */ }; - start { + event-start { label = "Start Button"; linux,code = <BTN_START>; gpios = <&pio 0 12 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA12 */ }; - top-left { + event-top-left { label = "Top Left Button"; linux,code = <BTN_TL>; gpios = <&pio 7 22 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH22 */ }; - top-right { + event-top-right { label = "Top Right Button"; linux,code = <BTN_TR>; gpios = <&pio 0 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA13 */ diff --git a/dts/src/arm/sun4i-a10-pcduino.dts b/dts/src/arm/sun4i-a10-pcduino.dts index 1ac82376ba..a332d61fd5 100644 --- a/dts/src/arm/sun4i-a10-pcduino.dts +++ b/dts/src/arm/sun4i-a10-pcduino.dts @@ -77,19 +77,19 @@ gpio-keys { compatible = "gpio-keys"; - back { + key-back { label = "Key Back"; linux,code = <KEY_BACK>; gpios = <&pio 7 17 GPIO_ACTIVE_LOW>; }; - home { + key-home { label = "Key Home"; linux,code = <KEY_HOME>; gpios = <&pio 7 18 GPIO_ACTIVE_LOW>; }; - menu { + key-menu { label = "Key Menu"; linux,code = <KEY_MENU>; gpios = <&pio 7 19 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/sun5i-a13-licheepi-one.dts b/dts/src/arm/sun5i-a13-licheepi-one.dts index 2ce361f8fe..3a6c4bd0a4 100644 --- a/dts/src/arm/sun5i-a13-licheepi-one.dts +++ b/dts/src/arm/sun5i-a13-licheepi-one.dts @@ -67,18 +67,18 @@ compatible = "gpio-leds"; led-0 { - label ="licheepi:red:usr"; + label = "licheepi:red:usr"; gpios = <&pio 2 5 GPIO_ACTIVE_LOW>; }; led-1 { - label ="licheepi:green:usr"; + label = "licheepi:green:usr"; gpios = <&pio 2 19 GPIO_ACTIVE_LOW>; default-state = "on"; }; led-2 { - label ="licheepi:blue:usr"; + label = "licheepi:blue:usr"; gpios = <&pio 2 4 GPIO_ACTIVE_LOW>; }; diff --git a/dts/src/arm/sun6i-a31.dtsi b/dts/src/arm/sun6i-a31.dtsi index 715d748544..6cdadba6a3 100644 --- a/dts/src/arm/sun6i-a31.dtsi +++ b/dts/src/arm/sun6i-a31.dtsi @@ -46,6 +46,7 @@ #include <dt-bindings/thermal/thermal.h> #include <dt-bindings/clock/sun6i-a31-ccu.h> +#include <dt-bindings/clock/sun6i-rtc.h> #include <dt-bindings/reset/sun6i-a31-ccu.h> / { @@ -598,7 +599,7 @@ ccu: clock@1c20000 { compatible = "allwinner,sun6i-a31-ccu"; reg = <0x01c20000 0x400>; - clocks = <&osc24M>, <&rtc 0>; + clocks = <&osc24M>, <&rtc CLK_OSC32K>; clock-names = "hosc", "losc"; #clock-cells = <1>; #reset-cells = <1>; @@ -612,7 +613,8 @@ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_APB1_PIO>, <&osc24M>, <&rtc 0>; + clocks = <&ccu CLK_APB1_PIO>, <&osc24M>, + <&rtc CLK_OSC32K>; clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller; @@ -1319,7 +1321,7 @@ ar100: ar100_clk { compatible = "allwinner,sun6i-a31-ar100-clk"; #clock-cells = <0>; - clocks = <&rtc 0>, <&osc24M>, + clocks = <&rtc CLK_OSC32K>, <&osc24M>, <&ccu CLK_PLL_PERIPH>, <&ccu CLK_PLL_PERIPH>; clock-output-names = "ar100"; @@ -1354,7 +1356,7 @@ ir_clk: ir_clk { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-mod0-clk"; - clocks = <&rtc 0>, <&osc24M>; + clocks = <&rtc CLK_OSC32K>, <&osc24M>; clock-output-names = "ir"; }; @@ -1385,9 +1387,8 @@ interrupt-parent = <&r_intc>; interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb0_gates 0>, <&osc24M>, <&rtc 0>; + clocks = <&apb0_gates 0>, <&osc24M>, <&rtc CLK_OSC32K>; clock-names = "apb", "hosc", "losc"; - resets = <&apb0_rst 0>; gpio-controller; interrupt-controller; #interrupt-cells = <3>; diff --git a/dts/src/arm/sun7i-a20-pcduino3.dts b/dts/src/arm/sun7i-a20-pcduino3.dts index 4f8d55d3ba..928b86a95f 100644 --- a/dts/src/arm/sun7i-a20-pcduino3.dts +++ b/dts/src/arm/sun7i-a20-pcduino3.dts @@ -78,19 +78,19 @@ gpio-keys { compatible = "gpio-keys"; - back { + key-back { label = "Key Back"; linux,code = <KEY_BACK>; gpios = <&pio 7 17 GPIO_ACTIVE_LOW>; }; - home { + key-home { label = "Key Home"; linux,code = <KEY_HOME>; gpios = <&pio 7 18 GPIO_ACTIVE_LOW>; }; - menu { + key-menu { label = "Key Menu"; linux,code = <KEY_MENU>; gpios = <&pio 7 19 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/sun8i-a23-a33.dtsi b/dts/src/arm/sun8i-a23-a33.dtsi index 4461d5098b..f630ab55bb 100644 --- a/dts/src/arm/sun8i-a23-a33.dtsi +++ b/dts/src/arm/sun8i-a23-a33.dtsi @@ -44,6 +44,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/sun6i-rtc.h> #include <dt-bindings/clock/sun8i-a23-a33-ccu.h> #include <dt-bindings/reset/sun8i-a23-a33-ccu.h> @@ -329,7 +330,7 @@ ccu: clock@1c20000 { reg = <0x01c20000 0x400>; - clocks = <&osc24M>, <&rtc 0>; + clocks = <&osc24M>, <&rtc CLK_OSC32K>; clock-names = "hosc", "losc"; #clock-cells = <1>; #reset-cells = <1>; @@ -340,7 +341,8 @@ reg = <0x01c20800 0x400>; interrupt-parent = <&r_intc>; /* interrupts get set in SoC specific dtsi file */ - clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>; + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, + <&rtc CLK_OSC32K>; clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller; @@ -810,9 +812,8 @@ reg = <0x01f02c00 0x400>; interrupt-parent = <&r_intc>; interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb0_gates 0>, <&osc24M>, <&rtc 0>; + clocks = <&apb0_gates 0>, <&osc24M>, <&rtc CLK_OSC32K>; clock-names = "apb", "hosc", "losc"; - resets = <&apb0_rst 0>; gpio-controller; interrupt-controller; #interrupt-cells = <3>; diff --git a/dts/src/arm/sun8i-h2-plus-bananapi-m2-zero.dts b/dts/src/arm/sun8i-h2-plus-bananapi-m2-zero.dts index d5c7b7984d..d729b7c705 100644 --- a/dts/src/arm/sun8i-h2-plus-bananapi-m2-zero.dts +++ b/dts/src/arm/sun8i-h2-plus-bananapi-m2-zero.dts @@ -47,10 +47,10 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - sw4 { + switch-4 { label = "power"; linux,code = <KEY_POWER>; gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; @@ -106,7 +106,7 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "ext_clock"; }; }; @@ -181,7 +181,7 @@ bluetooth { compatible = "brcm,bcm43438-bt"; max-speed = <1500000>; - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "lpo"; vbat-supply = <®_vcc3v3>; vddio-supply = <®_vcc3v3>; diff --git a/dts/src/arm/sun8i-h3-beelink-x2.dts b/dts/src/arm/sun8i-h3-beelink-x2.dts index cd9f655e4f..27a0d51289 100644 --- a/dts/src/arm/sun8i-h3-beelink-x2.dts +++ b/dts/src/arm/sun8i-h3-beelink-x2.dts @@ -93,10 +93,10 @@ }; }; - r-gpio-keys { + gpio-keys { compatible = "gpio-keys"; - power { + key-power { label = "power"; linux,code = <KEY_POWER>; gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; @@ -125,7 +125,7 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "ext_clock"; }; }; diff --git a/dts/src/arm/sun8i-h3-mapleboard-mp130.dts b/dts/src/arm/sun8i-h3-mapleboard-mp130.dts index ff0a7a952e..f5c8ccc5b8 100644 --- a/dts/src/arm/sun8i-h3-mapleboard-mp130.dts +++ b/dts/src/arm/sun8i-h3-mapleboard-mp130.dts @@ -39,16 +39,16 @@ }; }; - r_gpio_keys { + gpio-keys { compatible = "gpio-keys"; - power { + key-power { label = "power"; linux,code = <KEY_POWER>; gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; /* PL3 */ }; - user { + key-user { label = "user"; linux,code = <BTN_0>; gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/sun8i-h3-nanopi-duo2.dts b/dts/src/arm/sun8i-h3-nanopi-duo2.dts index 8e7dfcffe1..43641cb823 100644 --- a/dts/src/arm/sun8i-h3-nanopi-duo2.dts +++ b/dts/src/arm/sun8i-h3-nanopi-duo2.dts @@ -37,10 +37,10 @@ }; }; - r_gpio_keys { + gpio-keys { compatible = "gpio-keys"; - k1 { + key-0 { label = "k1"; linux,code = <BTN_0>; gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; /* PL3 */ @@ -90,7 +90,7 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "ext_clock"; }; @@ -151,7 +151,7 @@ bluetooth { compatible = "brcm,bcm43438-bt"; - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "lpo"; vbat-supply = <®_vcc3v3>; vddio-supply = <®_vcc3v3>; diff --git a/dts/src/arm/sun8i-h3-nanopi-neo-air.dts b/dts/src/arm/sun8i-h3-nanopi-neo-air.dts index cd3df12b65..9e1a33f94c 100644 --- a/dts/src/arm/sun8i-h3-nanopi-neo-air.dts +++ b/dts/src/arm/sun8i-h3-nanopi-neo-air.dts @@ -127,7 +127,7 @@ bluetooth { compatible = "brcm,bcm43438-bt"; - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "lpo"; vbat-supply = <®_vcc3v3>; vddio-supply = <®_vcc3v3>; diff --git a/dts/src/arm/sun8i-h3-nanopi-r1.dts b/dts/src/arm/sun8i-h3-nanopi-r1.dts index 26e2e6172e..42cd1131ad 100644 --- a/dts/src/arm/sun8i-h3-nanopi-r1.dts +++ b/dts/src/arm/sun8i-h3-nanopi-r1.dts @@ -46,7 +46,7 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "ext_clock"; }; @@ -147,7 +147,7 @@ bluetooth { compatible = "brcm,bcm43438-bt"; - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "lpo"; vbat-supply = <®_vcc3v3>; vddio-supply = <®_vcc3v3>; diff --git a/dts/src/arm/sun8i-h3-nanopi.dtsi b/dts/src/arm/sun8i-h3-nanopi.dtsi index a9f749f49b..cf8413fba6 100644 --- a/dts/src/arm/sun8i-h3-nanopi.dtsi +++ b/dts/src/arm/sun8i-h3-nanopi.dtsi @@ -73,10 +73,10 @@ }; }; - r_gpio_keys { + gpio-keys { compatible = "gpio-keys"; - k1 { + key-0 { label = "k1"; linux,code = <KEY_POWER>; gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/sun8i-h3-orangepi-2.dts b/dts/src/arm/sun8i-h3-orangepi-2.dts index 9daffd90c1..f1f9dbead3 100644 --- a/dts/src/arm/sun8i-h3-orangepi-2.dts +++ b/dts/src/arm/sun8i-h3-orangepi-2.dts @@ -88,16 +88,16 @@ }; }; - r_gpio_keys { + gpio-keys { compatible = "gpio-keys"; - sw2 { + switch-2 { label = "sw2"; linux,code = <BTN_1>; gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>; }; - sw4 { + switch-4 { label = "sw4"; linux,code = <KEY_POWER>; gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/sun8i-h3-orangepi-lite.dts b/dts/src/arm/sun8i-h3-orangepi-lite.dts index 6f9c97add5..305b34a321 100644 --- a/dts/src/arm/sun8i-h3-orangepi-lite.dts +++ b/dts/src/arm/sun8i-h3-orangepi-lite.dts @@ -87,10 +87,10 @@ }; }; - r_gpio_keys { + gpio-keys { compatible = "gpio-keys"; - sw4 { + switch-4 { label = "sw4"; linux,code = <BTN_0>; gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/sun8i-h3-orangepi-one.dts b/dts/src/arm/sun8i-h3-orangepi-one.dts index 4759ba3f29..59f6f6d5e7 100644 --- a/dts/src/arm/sun8i-h3-orangepi-one.dts +++ b/dts/src/arm/sun8i-h3-orangepi-one.dts @@ -86,10 +86,10 @@ }; }; - r_gpio_keys { + gpio-keys { compatible = "gpio-keys"; - sw4 { + switch-4 { label = "sw4"; linux,code = <BTN_0>; gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/sun8i-h3-orangepi-pc.dts b/dts/src/arm/sun8i-h3-orangepi-pc.dts index 90f75fa85e..b96e015f54 100644 --- a/dts/src/arm/sun8i-h3-orangepi-pc.dts +++ b/dts/src/arm/sun8i-h3-orangepi-pc.dts @@ -86,10 +86,10 @@ }; }; - r_gpio_keys { + gpio-keys { compatible = "gpio-keys"; - sw4 { + switch-4 { label = "sw4"; linux,code = <KEY_POWER>; gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm/sun8i-r16-bananapi-m2m.dts b/dts/src/arm/sun8i-r16-bananapi-m2m.dts index bf5b5e2f61..bc394686fe 100644 --- a/dts/src/arm/sun8i-r16-bananapi-m2m.dts +++ b/dts/src/arm/sun8i-r16-bananapi-m2m.dts @@ -91,7 +91,7 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL06 */ - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "ext_clock"; }; }; @@ -283,7 +283,7 @@ bluetooth { compatible = "brcm,bcm43438-bt"; - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "lpo"; vbat-supply = <®_dldo1>; vddio-supply = <®_aldo3>; diff --git a/dts/src/arm/sun8i-r40-bananapi-m2-ultra.dts b/dts/src/arm/sun8i-r40-bananapi-m2-ultra.dts index a6a1087a0c..28197bbcb1 100644 --- a/dts/src/arm/sun8i-r40-bananapi-m2-ultra.dts +++ b/dts/src/arm/sun8i-r40-bananapi-m2-ultra.dts @@ -43,6 +43,7 @@ /dts-v1/; #include "sun8i-r40.dtsi" +#include "sun8i-r40-cpu-opp.dtsi" #include <dt-bindings/gpio/gpio.h> @@ -113,6 +114,10 @@ status = "okay"; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + &de { status = "okay"; }; diff --git a/dts/src/arm/sun8i-r40-cpu-opp.dtsi b/dts/src/arm/sun8i-r40-cpu-opp.dtsi new file mode 100644 index 0000000000..649928b361 --- /dev/null +++ b/dts/src/arm/sun8i-r40-cpu-opp.dtsi @@ -0,0 +1,52 @@ +/{ + cpu0_opp_table: opp-table-cpu { + compatible = "operating-points-v2"; + opp-shared; + + opp-720000000 { + opp-hz = /bits/ 64 <720000000>; + opp-microvolt = <1000000 1000000 1300000>; + clock-latency-ns = <2000000>; + }; + + opp-912000000 { + opp-hz = /bits/ 64 <912000000>; + opp-microvolt = <1100000 1100000 1300000>; + clock-latency-ns = <2000000>; + }; + + opp-1008000000 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <1160000 1160000 1300000>; + clock-latency-ns = <2000000>; + }; + + opp-1104000000 { + opp-hz = /bits/ 64 <1104000000>; + opp-microvolt = <1240000 1240000 1300000>; + clock-latency-ns = <2000000>; + }; + + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1300000 1300000 1300000>; + clock-latency-ns = <2000000>; + }; + }; +}; + +&cpu0 { + operating-points-v2 = <&cpu0_opp_table>; +}; + +&cpu1 { + operating-points-v2 = <&cpu0_opp_table>; +}; + +&cpu2 { + operating-points-v2 = <&cpu0_opp_table>; +}; + +&cpu3 { + operating-points-v2 = <&cpu0_opp_table>; +}; diff --git a/dts/src/arm/sun8i-r40-feta40i.dtsi b/dts/src/arm/sun8i-r40-feta40i.dtsi index 265e0fa57a..9f39b5a2bb 100644 --- a/dts/src/arm/sun8i-r40-feta40i.dtsi +++ b/dts/src/arm/sun8i-r40-feta40i.dtsi @@ -5,6 +5,11 @@ // Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io> #include "sun8i-r40.dtsi" +#include "sun8i-r40-cpu-opp.dtsi" + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; &i2c0 { status = "okay"; diff --git a/dts/src/arm/sun8i-r40.dtsi b/dts/src/arm/sun8i-r40.dtsi index 03d3e5f45a..4ef26d8f53 100644 --- a/dts/src/arm/sun8i-r40.dtsi +++ b/dts/src/arm/sun8i-r40.dtsi @@ -42,6 +42,7 @@ */ #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/sun6i-rtc.h> #include <dt-bindings/clock/sun8i-de2.h> #include <dt-bindings/clock/sun8i-r40-ccu.h> #include <dt-bindings/clock/sun8i-tcon-top.h> @@ -84,24 +85,36 @@ compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <0>; + clocks = <&ccu CLK_CPU>; + clock-names = "cpu"; + #cooling-cells = <2>; }; cpu1: cpu@1 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <1>; + clocks = <&ccu CLK_CPU>; + clock-names = "cpu"; + #cooling-cells = <2>; }; cpu2: cpu@2 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <2>; + clocks = <&ccu CLK_CPU>; + clock-names = "cpu"; + #cooling-cells = <2>; }; cpu3: cpu@3 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <3>; + clocks = <&ccu CLK_CPU>; + clock-names = "cpu"; + #cooling-cells = <2>; }; }; @@ -117,6 +130,30 @@ polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&ths 0>; + + trips { + cpu_hot_trip: cpu-hot { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_very_hot_trip: cpu-very-hot { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + cpu-hot-limit { + trip = <&cpu_hot_trip>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; gpu_thermal: gpu-thermal { @@ -485,7 +522,7 @@ ccu: clock@1c20000 { compatible = "allwinner,sun8i-r40-ccu"; reg = <0x01c20000 0x400>; - clocks = <&osc24M>, <&rtc 0>; + clocks = <&osc24M>, <&rtc CLK_OSC32K>; clock-names = "hosc", "losc"; #clock-cells = <1>; #reset-cells = <1>; @@ -504,7 +541,8 @@ compatible = "allwinner,sun8i-r40-pinctrl"; reg = <0x01c20800 0x400>; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>; + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, + <&rtc CLK_OSC32K>; clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller; @@ -1231,7 +1269,7 @@ reg-io-width = <1>; interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_HDMI0>, <&ccu CLK_HDMI_SLOW>, - <&ccu CLK_HDMI>, <&rtc 0>; + <&ccu CLK_HDMI>, <&rtc CLK_OSC32K>; clock-names = "iahb", "isfr", "tmds", "cec"; resets = <&ccu RST_BUS_HDMI1>; reset-names = "ctrl"; diff --git a/dts/src/arm/sun8i-t3-cqa3t-bv3.dts b/dts/src/arm/sun8i-t3-cqa3t-bv3.dts index 6931aaab23..9f472521f4 100644 --- a/dts/src/arm/sun8i-t3-cqa3t-bv3.dts +++ b/dts/src/arm/sun8i-t3-cqa3t-bv3.dts @@ -45,6 +45,7 @@ /dts-v1/; #include "sun8i-r40.dtsi" +#include "sun8i-r40-cpu-opp.dtsi" #include <dt-bindings/gpio/gpio.h> @@ -88,6 +89,10 @@ status = "okay"; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + &de { status = "okay"; }; diff --git a/dts/src/arm/sun8i-v3s.dtsi b/dts/src/arm/sun8i-v3s.dtsi index 084323d5c6..db194c606f 100644 --- a/dts/src/arm/sun8i-v3s.dtsi +++ b/dts/src/arm/sun8i-v3s.dtsi @@ -42,6 +42,7 @@ */ #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/sun6i-rtc.h> #include <dt-bindings/clock/sun8i-v3s-ccu.h> #include <dt-bindings/reset/sun8i-v3s-ccu.h> #include <dt-bindings/clock/sun8i-de2.h> @@ -321,7 +322,7 @@ ccu: clock@1c20000 { compatible = "allwinner,sun8i-v3s-ccu"; reg = <0x01c20000 0x400>; - clocks = <&osc24M>, <&rtc 0>; + clocks = <&osc24M>, <&rtc CLK_OSC32K>; clock-names = "hosc", "losc"; #clock-cells = <1>; #reset-cells = <1>; @@ -342,7 +343,8 @@ reg = <0x01c20800 0x400>; interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>; + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, + <&rtc CLK_OSC32K>; clock-names = "apb", "hosc", "losc"; gpio-controller; #gpio-cells = <3>; diff --git a/dts/src/arm/sun8i-v40-bananapi-m2-berry.dts b/dts/src/arm/sun8i-v40-bananapi-m2-berry.dts index 47954551f5..434871040a 100644 --- a/dts/src/arm/sun8i-v40-bananapi-m2-berry.dts +++ b/dts/src/arm/sun8i-v40-bananapi-m2-berry.dts @@ -42,6 +42,7 @@ /dts-v1/; #include "sun8i-r40.dtsi" +#include "sun8i-r40-cpu-opp.dtsi" #include <dt-bindings/gpio/gpio.h> @@ -107,6 +108,10 @@ status = "okay"; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + &de { status = "okay"; }; diff --git a/dts/src/arm/sun9i-a80.dtsi b/dts/src/arm/sun9i-a80.dtsi index ce4fa6706d..7d3f3300f4 100644 --- a/dts/src/arm/sun9i-a80.dtsi +++ b/dts/src/arm/sun9i-a80.dtsi @@ -1218,7 +1218,6 @@ <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apbs_gates 0>, <&osc24M>, <&osc32k>; clock-names = "apb", "hosc", "losc"; - resets = <&apbs_rst 0>; gpio-controller; interrupt-controller; #interrupt-cells = <3>; diff --git a/dts/src/arm/sunplus-sp7021-achip.dtsi b/dts/src/arm/sunplus-sp7021-achip.dtsi new file mode 100644 index 0000000000..493d32357e --- /dev/null +++ b/dts/src/arm/sunplus-sp7021-achip.dtsi @@ -0,0 +1,84 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for Sunplus SP7021 + * + * Copyright (C) 2021 Sunplus Technology Co. + */ + +#include "sunplus-sp7021.dtsi" +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "sunplus,sp7021-achip", "sunplus,sp7021"; + model = "Sunplus SP7021 (CA7)"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + clock-frequency = <931000000>; + }; + cpu1: cpu@1 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <1>; + clock-frequency = <931000000>; + }; + cpu2: cpu@2 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <2>; + clock-frequency = <931000000>; + }; + cpu3: cpu@3 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <3>; + clock-frequency = <931000000>; + }; + }; + + gic: interrupt-controller@9f101000 { + compatible = "arm,cortex-a7-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x9f101000 0x1000>, + <0x9f102000 0x2000>, + <0x9f104000 0x2000>, + <0x9f106000 0x2000>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + clock-frequency = <XTAL>; + arm,cpu-registers-not-fw-configured; + }; + + arm-pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + soc@9c000000 { + intc: interrupt-controller@780 { + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, /* EXT_INT0 */ + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; /* EXT_INT1 */ + }; + }; +}; diff --git a/dts/src/arm/sunplus-sp7021-demo-v3.dts b/dts/src/arm/sunplus-sp7021-demo-v3.dts new file mode 100644 index 0000000000..d5c5ffc205 --- /dev/null +++ b/dts/src/arm/sunplus-sp7021-demo-v3.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for Sunplus SP7021 Demo V3 SBC board + * + * Copyright (C) Sunplus Technology Co. + */ + +/dts-v1/; + +#include "sunplus-sp7021-achip.dtsi" + +/ { + compatible = "sunplus,sp7021-demo-v3", "sunplus,sp7021"; + model = "Sunplus SP7021/CA7/Demo_V3"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x20000000>; + }; +}; diff --git a/dts/src/arm/sunplus-sp7021.dtsi b/dts/src/arm/sunplus-sp7021.dtsi new file mode 100644 index 0000000000..7dc4ce3619 --- /dev/null +++ b/dts/src/arm/sunplus-sp7021.dtsi @@ -0,0 +1,310 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for Sunplus SP7021 + * + * Copyright (C) 2021 Sunplus Technology Co. + */ + +#include <dt-bindings/clock/sunplus,sp7021-clkc.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/reset/sunplus,sp7021-reset.h> +#include <dt-bindings/pinctrl/sppctl-sp7021.h> +#include <dt-bindings/gpio/gpio.h> + +#define XTAL 27000000 + +/ { + compatible = "sunplus,sp7021"; + model = "Sunplus SP7021"; + + clocks { + extclk: osc0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <XTAL>; + clock-output-names = "extclk"; + }; + }; + + soc@9c000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x9c000000 0x400000>; + interrupt-parent = <&intc>; + + clkc: clock-controller@4 { + compatible = "sunplus,sp7021-clkc"; + reg = <0x4 0x28>, + <0x200 0x44>, + <0x268 0x04>; + clocks = <&extclk>; + #clock-cells = <1>; + }; + + intc: interrupt-controller@780 { + compatible = "sunplus,sp7021-intc"; + reg = <0x780 0x80>, <0xa80 0x80>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + otp: otp@af00 { + compatible = "sunplus,sp7021-ocotp"; + reg = <0xaf00 0x34>, <0xaf80 0x58>; + reg-names = "hb_gpio", "otprx"; + clocks = <&clkc CLK_OTPRX>; + resets = <&rstc RST_OTPRX>; + #address-cells = <1>; + #size-cells = <1>; + + therm_calib: thermal-calibration@14 { + reg = <0x14 0x3>; + }; + disc_vol: disconnect-voltage@18 { + reg = <0x18 0x2>; + }; + mac_addr0: mac-address0@34 { + reg = <0x34 0x6>; + }; + mac_addr1: mac-address1@3a { + reg = <0x3a 0x6>; + }; + }; + + pctl: pinctrl@100 { + compatible = "sunplus,sp7021-pctl"; + reg = <0x100 0x100>, + <0x300 0x100>, + <0x32e4 0x1C>, + <0x80 0x20>; + reg-names = "moon2", "gpioxt", "first", "moon1"; + gpio-controller; + #gpio-cells = <2>; + clocks = <&clkc CLK_GPIO>; + resets = <&rstc RST_GPIO>; + + emac_pins: pinmux-emac-pins { + sunplus,pins = < + SPPCTL_IOPAD(49,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_CLK_OUT,0) + SPPCTL_IOPAD(44,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_MAC_SMI_MDC,0) + SPPCTL_IOPAD(43,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_MAC_SMI_MDIO,0) + SPPCTL_IOPAD(52,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXEN,0) + SPPCTL_IOPAD(50,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXD0,0) + SPPCTL_IOPAD(51,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXD1,0) + SPPCTL_IOPAD(46,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_CRSDV,0) + SPPCTL_IOPAD(47,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_RXD0,0) + SPPCTL_IOPAD(48,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_RXD1,0) + SPPCTL_IOPAD(45,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_RXER,0) + SPPCTL_IOPAD(59,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_TXEN,0) + SPPCTL_IOPAD(57,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_TXD0,0) + SPPCTL_IOPAD(58,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_TXD1,0) + SPPCTL_IOPAD(54,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_CRSDV,0) + SPPCTL_IOPAD(55,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_RXD0,0) + SPPCTL_IOPAD(56,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_RXD1,0) + SPPCTL_IOPAD(53,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_RXER,0) + >; + sunplus,zerofunc = < + MUXF_L2SW_LED_FLASH0 + MUXF_L2SW_LED_FLASH1 + MUXF_L2SW_LED_ON0 + MUXF_L2SW_LED_ON1 + MUXF_DAISY_MODE + >; + }; + + emmc_pins: pinmux-emmc-pins { + function = "CARD0_EMMC"; + groups = "CARD0_EMMC"; + }; + + leds_pins: pinmux-leds-pins { + sunplus,pins = < SPPCTL_IOPAD(0,SPPCTL_PCTL_G_GPIO,0,SPPCTL_PCTL_L_OUT) >; + }; + + sdcard_pins: pinmux-sdcard-pins { + function = "SD_CARD"; + groups = "SD_CARD"; + sunplus,pins = < SPPCTL_IOPAD(91, SPPCTL_PCTL_G_GPIO, 0, 0) >; + }; + + spi0_pins: pinmux-spi0-pins { + sunplus,pins = < + SPPCTL_IOPAD(26,SPPCTL_PCTL_G_GPIO,0,0) + SPPCTL_IOPAD(28,SPPCTL_PCTL_G_GPIO,0,0) + SPPCTL_IOPAD(23,SPPCTL_PCTL_G_PMUX,MUXF_SPI0S_DO,0) + SPPCTL_IOPAD(25,SPPCTL_PCTL_G_PMUX,MUXF_SPI0S_DI,0) + SPPCTL_IOPAD(27,SPPCTL_PCTL_G_PMUX,MUXF_SPI0S_CLK,0) + >; + }; + + uart0_pins: pinmux-uart0-pins { + function = "UA0"; + groups = "UA0"; + }; + + uart1_pins: pinmux-uart1-pins { + sunplus,pins = < + SPPCTL_IOPAD(14,SPPCTL_PCTL_G_PMUX,MUXF_UA4_TX,0) + SPPCTL_IOPAD(16,SPPCTL_PCTL_G_PMUX,MUXF_UA4_RX,0) + >; + }; + + uart2_pins: pinmux-uart2-pins { + sunplus,pins = < + SPPCTL_IOPAD(16,SPPCTL_PCTL_G_PMUX,MUXF_UA2_TX,0) + SPPCTL_IOPAD(17,SPPCTL_PCTL_G_PMUX,MUXF_UA2_RX,0) + SPPCTL_IOPAD(18,SPPCTL_PCTL_G_PMUX,MUXF_UA2_RTS,0) + SPPCTL_IOPAD(19,SPPCTL_PCTL_G_PMUX,MUXF_UA2_CTS,0) + >; + }; + + uart4_pins: pinmux-uart4-pins { + sunplus,pins = < + SPPCTL_IOPAD(22,SPPCTL_PCTL_G_PMUX,MUXF_UA4_TX,0) + SPPCTL_IOPAD(20,SPPCTL_PCTL_G_PMUX,MUXF_UA4_RX,0) + SPPCTL_IOPAD(23,SPPCTL_PCTL_G_PMUX,MUXF_UA4_RTS,0) + SPPCTL_IOPAD(21,SPPCTL_PCTL_G_PMUX,MUXF_UA4_CTS,0) + >; + }; + }; + + rstc: reset@54 { + compatible = "sunplus,sp7021-reset"; + reg = <0x54 0x28>; + #reset-cells = <1>; + }; + + rtc: rtc@3a00 { + compatible = "sunplus,sp7021-rtc"; + reg = <0x3a00 0x80>; + reg-names = "rtc"; + clocks = <&clkc CLK_RTC>; + resets = <&rstc RST_RTC>; + interrupts = <163 IRQ_TYPE_EDGE_RISING>; + }; + + spi_controller0: spi@2d80 { + compatible = "sunplus,sp7021-spi"; + reg = <0x2d80 0x80>, <0x2e00 0x80>; + reg-names = "master", "slave"; + interrupts = <144 IRQ_TYPE_LEVEL_HIGH>, + <146 IRQ_TYPE_LEVEL_HIGH>, + <145 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dma_w", "master_risc", "slave_risc"; + clocks = <&clkc CLK_SPI_COMBO_0>; + resets = <&rstc RST_SPI_COMBO_0>; + + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + cs-gpios = <&pctl 26 GPIO_ACTIVE_LOW>, + <&pctl 28 GPIO_ACTIVE_LOW>; + }; + + spi_controller1: spi@f480 { + compatible = "sunplus,sp7021-spi"; + reg = <0xf480 0x80>, <0xf500 0x80>; + reg-names = "master", "slave"; + interrupts = <67 IRQ_TYPE_LEVEL_HIGH>, + <69 IRQ_TYPE_LEVEL_HIGH>, + <68 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dma_w", "master_risc", "slave_risc"; + clocks = <&clkc CLK_SPI_COMBO_1>; + resets = <&rstc RST_SPI_COMBO_1>; + spi-max-frequency = <25000000>; + status = "disabled"; + }; + + spi_controller2: spi@f600 { + compatible = "sunplus,sp7021-spi"; + reg = <0xf600 0x80>, <0xf680 0x80>; + reg-names = "master", "slave"; + interrupts = <70 IRQ_TYPE_LEVEL_HIGH>, + <72 IRQ_TYPE_LEVEL_HIGH>, + <71 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dma_w", "master_risc", "slave_risc"; + clocks = <&clkc CLK_SPI_COMBO_2>; + resets = <&rstc RST_SPI_COMBO_2>; + spi-max-frequency = <25000000>; + status = "disabled"; + }; + + spi_controller3: spi@f780 { + compatible = "sunplus,sp7021-spi"; + reg = <0xf780 0x80>, <0xf800 0x80>; + reg-names = "master", "slave"; + interrupts = <73 IRQ_TYPE_LEVEL_HIGH>, + <75 IRQ_TYPE_LEVEL_HIGH>, + <74 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dma_w", "master_risc", "slave_risc"; + clocks = <&clkc CLK_SPI_COMBO_3>; + resets = <&rstc RST_SPI_COMBO_3>; + spi-max-frequency = <25000000>; + status = "disabled"; + }; + + uart0: serial@900 { + compatible = "sunplus,sp7021-uart"; + reg = <0x900 0x80>; + interrupts = <53 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc CLK_UA0>; + resets = <&rstc RST_UA0>; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + }; + + uart1: serial@980 { + compatible = "sunplus,sp7021-uart"; + reg = <0x980 0x80>; + interrupts = <54 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc CLK_UA1>; + resets = <&rstc RST_UA1>; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "disabled"; + }; + + uart2: serial@800 { + compatible = "sunplus,sp7021-uart"; + reg = <0x800 0x80>; + interrupts = <55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc CLK_UA2>; + resets = <&rstc RST_UA2>; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "disabled"; + }; + + uart3: serial@880 { + compatible = "sunplus,sp7021-uart"; + reg = <0x880 0x80>; + interrupts = <56 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc CLK_UA3>; + resets = <&rstc RST_UA3>; + status = "disabled"; + }; + + uart4: serial@8780 { + compatible = "sunplus,sp7021-uart"; + reg = <0x8780 0x80>; + interrupts = <134 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc CLK_UA4>; + resets = <&rstc RST_UA4>; + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins>; + status = "disabled"; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&leds_pins>; + system-led { + label = "system-led"; + gpios = <&pctl 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "heartbeat"; + }; + }; +}; diff --git a/dts/src/arm/sunxi-bananapi-m2-plus.dtsi b/dts/src/arm/sunxi-bananapi-m2-plus.dtsi index d03f5853ef..e899d14f38 100644 --- a/dts/src/arm/sunxi-bananapi-m2-plus.dtsi +++ b/dts/src/arm/sunxi-bananapi-m2-plus.dtsi @@ -77,10 +77,10 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - sw4 { + switch-4 { label = "power"; linux,code = <KEY_POWER>; gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; @@ -101,7 +101,7 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "ext_clock"; }; }; @@ -221,7 +221,7 @@ bluetooth { compatible = "brcm,bcm43438-bt"; max-speed = <1500000>; - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "lpo"; vbat-supply = <®_vcc3v3>; vddio-supply = <®_vcc3v3>; diff --git a/dts/src/arm/sunxi-h3-h5-emlid-neutis.dtsi b/dts/src/arm/sunxi-h3-h5-emlid-neutis.dtsi index fc67e30fe2..60804b0e6c 100644 --- a/dts/src/arm/sunxi-h3-h5-emlid-neutis.dtsi +++ b/dts/src/arm/sunxi-h3-h5-emlid-neutis.dtsi @@ -22,7 +22,7 @@ compatible = "mmc-pwrseq-simple"; reset-gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */ post-power-on-delay-ms = <200>; - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "ext_clock"; }; }; @@ -124,7 +124,7 @@ bluetooth { compatible = "brcm,bcm43438-bt"; - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "lpo"; vbat-supply = <®_vcc3v3>; vddio-supply = <®_vcc3v3>; diff --git a/dts/src/arm/sunxi-h3-h5.dtsi b/dts/src/arm/sunxi-h3-h5.dtsi index d7e9f977f9..09aefb4e90 100644 --- a/dts/src/arm/sunxi-h3-h5.dtsi +++ b/dts/src/arm/sunxi-h3-h5.dtsi @@ -40,6 +40,7 @@ * OTHER DEALINGS IN THE SOFTWARE. */ +#include <dt-bindings/clock/sun6i-rtc.h> #include <dt-bindings/clock/sun8i-de2.h> #include <dt-bindings/clock/sun8i-h3-ccu.h> #include <dt-bindings/clock/sun8i-r-ccu.h> @@ -386,7 +387,7 @@ ccu: clock@1c20000 { /* compatible is in per SoC .dtsi file */ reg = <0x01c20000 0x400>; - clocks = <&osc24M>, <&rtc 0>; + clocks = <&osc24M>, <&rtc CLK_OSC32K>; clock-names = "hosc", "losc"; #clock-cells = <1>; #reset-cells = <1>; @@ -398,7 +399,8 @@ interrupt-parent = <&r_intc>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>; + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, + <&rtc CLK_OSC32K>; clock-names = "apb", "hosc", "losc"; gpio-controller; #gpio-cells = <3>; @@ -818,7 +820,7 @@ reg-io-width = <1>; interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>, - <&ccu CLK_HDMI>, <&rtc 0>; + <&ccu CLK_HDMI>, <&rtc CLK_OSC32K>; clock-names = "iahb", "isfr", "tmds", "cec"; resets = <&ccu RST_BUS_HDMI1>; reset-names = "ctrl"; @@ -878,7 +880,7 @@ r_ccu: clock@1f01400 { compatible = "allwinner,sun8i-h3-r-ccu"; reg = <0x01f01400 0x100>; - clocks = <&osc24M>, <&rtc 0>, <&rtc 2>, + clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>, <&ccu CLK_PLL_PERIPH0>; clock-names = "hosc", "losc", "iosc", "pll-periph"; #clock-cells = <1>; @@ -931,7 +933,8 @@ reg = <0x01f02c00 0x400>; interrupt-parent = <&r_intc>; interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, <&rtc 0>; + clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, + <&rtc CLK_OSC32K>; clock-names = "apb", "hosc", "losc"; gpio-controller; #gpio-cells = <3>; diff --git a/dts/src/arm/sunxi-libretech-all-h3-cc.dtsi b/dts/src/arm/sunxi-libretech-all-h3-cc.dtsi index 9e14fe5fdc..89731bb34c 100644 --- a/dts/src/arm/sunxi-libretech-all-h3-cc.dtsi +++ b/dts/src/arm/sunxi-libretech-all-h3-cc.dtsi @@ -42,10 +42,10 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - power { + key-power { label = "power"; linux,code = <KEY_POWER>; gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ diff --git a/dts/src/arm/tegra114-asus-tf701t.dts b/dts/src/arm/tegra114-asus-tf701t.dts index b791ce9742..284209b0bd 100644 --- a/dts/src/arm/tegra114-asus-tf701t.dts +++ b/dts/src/arm/tegra114-asus-tf701t.dts @@ -684,7 +684,7 @@ pinctrl-names = "default"; pinctrl-0 = <&gpio_keys_default>; - power { + button-power { label = "Power"; gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; @@ -692,14 +692,14 @@ wakeup-source; }; - volume-up { + button-volume-up { label = "Volume Up"; gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; debounce-interval = <10>; }; - volume-down { + button-volume-down { label = "Volume Down"; gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; @@ -715,7 +715,7 @@ pinctrl-names = "default"; pinctrl-0 = <&gpio_hall_sensor_default>; - hall-sensor { + switch-hall-sensor { label = "Hall Effect Sensor"; gpios = <&gpio TEGRA_GPIO(O, 5) GPIO_ACTIVE_LOW>; linux,input-type = <EV_SW>; diff --git a/dts/src/arm/tegra114-dalmore.dts b/dts/src/arm/tegra114-dalmore.dts index 658edfb8d7..fffd62bcea 100644 --- a/dts/src/arm/tegra114-dalmore.dts +++ b/dts/src/arm/tegra114-dalmore.dts @@ -1161,26 +1161,26 @@ gpio-keys { compatible = "gpio-keys"; - home { + key-home { label = "Home"; gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; linux,code = <KEY_HOME>; }; - power { + key-power { label = "Power"; gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; wakeup-source; }; - volume_down { + key-volume-down { label = "Volume Down"; gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; }; - volume_up { + key-volume-up { label = "Volume Up"; gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; diff --git a/dts/src/arm/tegra114-roth.dts b/dts/src/arm/tegra114-roth.dts index 2498cf18fd..b9d00009d1 100644 --- a/dts/src/arm/tegra114-roth.dts +++ b/dts/src/arm/tegra114-roth.dts @@ -1025,19 +1025,19 @@ gpio-keys { compatible = "gpio-keys"; - back { + key-back { label = "Back"; gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>; linux,code = <KEY_BACK>; }; - home { + key-home { label = "Home"; gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>; linux,code = <KEY_HOME>; }; - power { + key-power { label = "Power"; gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; diff --git a/dts/src/arm/tegra114-tn7.dts b/dts/src/arm/tegra114-tn7.dts index ef8f722dd9..f02d8c79ee 100644 --- a/dts/src/arm/tegra114-tn7.dts +++ b/dts/src/arm/tegra114-tn7.dts @@ -282,20 +282,20 @@ gpio-keys { compatible = "gpio-keys"; - power { + key-power { label = "Power"; gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; wakeup-source; }; - volume_down { + key-volume-down { label = "Volume Down"; gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; }; - volume_up { + key-volume-up { label = "Volume Up"; gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; diff --git a/dts/src/arm/tegra124-apalis-eval.dts b/dts/src/arm/tegra124-apalis-eval.dts index 3209554ec7..bce12b3411 100644 --- a/dts/src/arm/tegra124-apalis-eval.dts +++ b/dts/src/arm/tegra124-apalis-eval.dts @@ -191,7 +191,7 @@ gpio-keys { compatible = "gpio-keys"; - wakeup { + key-wakeup { label = "WAKE1_MICO"; gpios = <&gpio TEGRA_GPIO(DD, 3) GPIO_ACTIVE_LOW>; linux,code = <KEY_WAKEUP>; diff --git a/dts/src/arm/tegra124-apalis-v1.2-eval.dts b/dts/src/arm/tegra124-apalis-v1.2-eval.dts index 814257c79b..800283ad6b 100644 --- a/dts/src/arm/tegra124-apalis-v1.2-eval.dts +++ b/dts/src/arm/tegra124-apalis-v1.2-eval.dts @@ -193,7 +193,7 @@ gpio-keys { compatible = "gpio-keys"; - wakeup { + key-wakeup { label = "WAKE1_MICO"; gpios = <&gpio TEGRA_GPIO(DD, 3) GPIO_ACTIVE_LOW>; linux,code = <KEY_WAKEUP>; diff --git a/dts/src/arm/tegra124-jetson-tk1.dts b/dts/src/arm/tegra124-jetson-tk1.dts index 28b889e4e3..f41dd4039c 100644 --- a/dts/src/arm/tegra124-jetson-tk1.dts +++ b/dts/src/arm/tegra124-jetson-tk1.dts @@ -1886,7 +1886,7 @@ gpio-keys { compatible = "gpio-keys"; - power { + key-power { label = "Power"; gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; diff --git a/dts/src/arm/tegra124-nyan.dtsi b/dts/src/arm/tegra124-nyan.dtsi index a93cfb492b..13061ab524 100644 --- a/dts/src/arm/tegra124-nyan.dtsi +++ b/dts/src/arm/tegra124-nyan.dtsi @@ -603,7 +603,7 @@ gpio-keys { compatible = "gpio-keys"; - lid { + switch-lid { label = "Lid"; gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>; linux,input-type = <5>; @@ -612,7 +612,7 @@ wakeup-source; }; - power { + key-power { label = "Power"; gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; diff --git a/dts/src/arm/tegra124-venice2.dts b/dts/src/arm/tegra124-venice2.dts index 6a9592ceb5..8f40fcfc11 100644 --- a/dts/src/arm/tegra124-venice2.dts +++ b/dts/src/arm/tegra124-venice2.dts @@ -1078,7 +1078,7 @@ gpio-keys { compatible = "gpio-keys"; - power { + key-power { label = "Power"; gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; diff --git a/dts/src/arm/tegra20-acer-a500-picasso.dts b/dts/src/arm/tegra20-acer-a500-picasso.dts index a170a4ba36..dac6d02a1b 100644 --- a/dts/src/arm/tegra20-acer-a500-picasso.dts +++ b/dts/src/arm/tegra20-acer-a500-picasso.dts @@ -417,7 +417,7 @@ vddio-supply = <&vdd_1v8_sys>; device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>; - shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>; }; }; @@ -905,7 +905,7 @@ gpio-keys { compatible = "gpio-keys"; - power { + key-power { label = "Power"; gpios = <&gpio TEGRA_GPIO(I, 3) GPIO_ACTIVE_HIGH>; linux,code = <KEY_POWER>; @@ -914,7 +914,7 @@ wakeup-source; }; - rotation-lock { + key-rotation-lock { label = "Rotate-lock"; gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_HIGH>; linux,code = <SW_ROTATE_LOCK>; @@ -922,7 +922,7 @@ debounce-interval = <10>; }; - volume-up { + key-volume-up { label = "Volume Up"; gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; @@ -931,7 +931,7 @@ wakeup-source; }; - volume-down { + key-volume-down { label = "Volume Down"; gpios = <&gpio TEGRA_GPIO(Q, 5) GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; diff --git a/dts/src/arm/tegra20-asus-tf101.dts b/dts/src/arm/tegra20-asus-tf101.dts index a054d39db4..bf797a1f27 100644 --- a/dts/src/arm/tegra20-asus-tf101.dts +++ b/dts/src/arm/tegra20-asus-tf101.dts @@ -477,7 +477,7 @@ vddio-supply = <&vdd_1v8_sys>; device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>; - shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>; }; }; @@ -980,7 +980,7 @@ gpio-keys { compatible = "gpio-keys"; - dock-hall-sensor { + switch-dock-hall-sensor { label = "Lid"; gpios = <&gpio TEGRA_GPIO(S, 4) GPIO_ACTIVE_LOW>; linux,input-type = <EV_SW>; @@ -990,7 +990,7 @@ wakeup-source; }; - power { + key-power { label = "Power"; gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; @@ -999,7 +999,7 @@ wakeup-source; }; - volume-up { + key-volume-up { label = "Volume Up"; gpios = <&gpio TEGRA_GPIO(Q, 5) GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; @@ -1008,7 +1008,7 @@ wakeup-source; }; - volume-down { + key-volume-down { label = "Volume Down"; gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; diff --git a/dts/src/arm/tegra20-colibri-eval-v3.dts b/dts/src/arm/tegra20-colibri-eval-v3.dts index d2a3bf9d28..cb1190b77d 100644 --- a/dts/src/arm/tegra20-colibri-eval-v3.dts +++ b/dts/src/arm/tegra20-colibri-eval-v3.dts @@ -209,7 +209,7 @@ gpio-keys { compatible = "gpio-keys"; - wakeup { + key-wakeup { label = "SODIMM pin 45 wakeup"; gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>; linux,code = <KEY_WAKEUP>; diff --git a/dts/src/arm/tegra20-colibri-iris.dts b/dts/src/arm/tegra20-colibri-iris.dts index 00ecbbd5e9..53487cc215 100644 --- a/dts/src/arm/tegra20-colibri-iris.dts +++ b/dts/src/arm/tegra20-colibri-iris.dts @@ -191,7 +191,7 @@ gpio-keys { compatible = "gpio-keys"; - wakeup { + key-wakeup { label = "SODIMM pin 45 wakeup"; gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>; linux,code = <KEY_WAKEUP>; diff --git a/dts/src/arm/tegra20-harmony.dts b/dts/src/arm/tegra20-harmony.dts index 79b6b79fab..11f21aeba8 100644 --- a/dts/src/arm/tegra20-harmony.dts +++ b/dts/src/arm/tegra20-harmony.dts @@ -648,7 +648,7 @@ gpio-keys { compatible = "gpio-keys"; - power { + key-power { label = "Power"; gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; diff --git a/dts/src/arm/tegra20-paz00.dts b/dts/src/arm/tegra20-paz00.dts index 0fb4b1f5bc..48fe628c6d 100644 --- a/dts/src/arm/tegra20-paz00.dts +++ b/dts/src/arm/tegra20-paz00.dts @@ -596,7 +596,7 @@ gpio-keys { compatible = "gpio-keys"; - wakeup { + key-wakeup { label = "Wakeup"; gpios = <&gpio TEGRA_GPIO(J, 7) GPIO_ACTIVE_LOW>; linux,code = <KEY_WAKEUP>; diff --git a/dts/src/arm/tegra20-seaboard.dts b/dts/src/arm/tegra20-seaboard.dts index c4a6a6a945..5b4c5ef309 100644 --- a/dts/src/arm/tegra20-seaboard.dts +++ b/dts/src/arm/tegra20-seaboard.dts @@ -800,14 +800,14 @@ gpio-keys { compatible = "gpio-keys"; - power { + key-power { label = "Power"; gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; wakeup-source; }; - lid { + switch-lid { label = "Lid"; gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_HIGH>; linux,input-type = <5>; /* EV_SW */ diff --git a/dts/src/arm/tegra20-trimslice.dts b/dts/src/arm/tegra20-trimslice.dts index 9d0c86711d..dc51835423 100644 --- a/dts/src/arm/tegra20-trimslice.dts +++ b/dts/src/arm/tegra20-trimslice.dts @@ -388,7 +388,7 @@ gpio-keys { compatible = "gpio-keys"; - power { + key-power { label = "Power"; gpios = <&gpio TEGRA_GPIO(X, 6) GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; diff --git a/dts/src/arm/tegra20-ventana.dts b/dts/src/arm/tegra20-ventana.dts index b0a00970b6..caa17e876e 100644 --- a/dts/src/arm/tegra20-ventana.dts +++ b/dts/src/arm/tegra20-ventana.dts @@ -628,7 +628,7 @@ gpio-keys { compatible = "gpio-keys"; - power { + key-power { label = "Power"; gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; diff --git a/dts/src/arm/tegra30-apalis-eval.dts b/dts/src/arm/tegra30-apalis-eval.dts index 93b83b3c56..ad968ff968 100644 --- a/dts/src/arm/tegra30-apalis-eval.dts +++ b/dts/src/arm/tegra30-apalis-eval.dts @@ -181,7 +181,7 @@ gpio-keys { compatible = "gpio-keys"; - wakeup { + key-wakeup { label = "WAKE1_MICO"; gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>; linux,code = <KEY_WAKEUP>; diff --git a/dts/src/arm/tegra30-apalis-v1.1-eval.dts b/dts/src/arm/tegra30-apalis-v1.1-eval.dts index fbfa75e53f..c172fdb5e1 100644 --- a/dts/src/arm/tegra30-apalis-v1.1-eval.dts +++ b/dts/src/arm/tegra30-apalis-v1.1-eval.dts @@ -182,7 +182,7 @@ gpio-keys { compatible = "gpio-keys"; - wakeup { + key-wakeup { label = "WAKE1_MICO"; gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>; linux,code = <KEY_WAKEUP>; diff --git a/dts/src/arm/tegra30-asus-nexus7-grouper-common.dtsi b/dts/src/arm/tegra30-asus-nexus7-grouper-common.dtsi index 2c2ad2a38f..ee683c5a9c 100644 --- a/dts/src/arm/tegra30-asus-nexus7-grouper-common.dtsi +++ b/dts/src/arm/tegra30-asus-nexus7-grouper-common.dtsi @@ -63,7 +63,7 @@ gpio@6000d000 { init-mode-hog { gpio-hog; - gpios = <TEGRA_GPIO(DD, 7) GPIO_ACTIVE_HIGH>, + gpios = <TEGRA_GPIO(DD, 7) GPIO_ACTIVE_HIGH>, <TEGRA_GPIO(CC, 6) GPIO_ACTIVE_HIGH>, <TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>; output-low; @@ -820,7 +820,7 @@ vddio-supply = <&vdd_1v8>; device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>; - shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>; }; }; @@ -833,7 +833,7 @@ status = "okay"; touchscreen@10 { - compatible ="elan,ektf3624"; + compatible = "elan,ektf3624"; reg = <0x10>; interrupt-parent = <&gpio>; @@ -1124,7 +1124,7 @@ gpio-keys { compatible = "gpio-keys"; - hall-sensor { + switch-hall-sensor { label = "Lid"; gpios = <&gpio TEGRA_GPIO(S, 6) GPIO_ACTIVE_LOW>; linux,input-type = <EV_SW>; @@ -1134,7 +1134,7 @@ wakeup-source; }; - power { + key-power { label = "Power"; gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; @@ -1143,7 +1143,7 @@ wakeup-source; }; - volume-up { + key-volume-up { label = "Volume Up"; gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; @@ -1152,7 +1152,7 @@ wakeup-source; }; - volume-down { + key-volume-down { label = "Volume Down"; gpios = <&gpio TEGRA_GPIO(Q, 3) GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; diff --git a/dts/src/arm/tegra30-asus-nexus7-tilapia.dtsi b/dts/src/arm/tegra30-asus-nexus7-tilapia.dtsi index cd63e0ef74..1b241f0542 100644 --- a/dts/src/arm/tegra30-asus-nexus7-tilapia.dtsi +++ b/dts/src/arm/tegra30-asus-nexus7-tilapia.dtsi @@ -25,7 +25,7 @@ gpio@6000d000 { init-mode-3g-hog { gpio-hog; - gpios = <TEGRA_GPIO(D, 2) GPIO_ACTIVE_HIGH>, + gpios = <TEGRA_GPIO(D, 2) GPIO_ACTIVE_HIGH>, <TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>, <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>, <TEGRA_GPIO(P, 1) GPIO_ACTIVE_HIGH>, diff --git a/dts/src/arm/tegra30-asus-transformer-common.dtsi b/dts/src/arm/tegra30-asus-transformer-common.dtsi index c662ab261e..c27e70d8bf 100644 --- a/dts/src/arm/tegra30-asus-transformer-common.dtsi +++ b/dts/src/arm/tegra30-asus-transformer-common.dtsi @@ -1511,7 +1511,7 @@ compatible = "gpio-keys"; interrupt-parent = <&gpio>; - dock-hall-sensor { + switch-dock-hall-sensor { label = "Lid sensor"; gpios = <&gpio TEGRA_GPIO(S, 6) GPIO_ACTIVE_LOW>; linux,input-type = <EV_SW>; @@ -1521,7 +1521,7 @@ wakeup-source; }; - lineout-detect { + switch-lineout-detect { label = "Audio dock line-out detect"; gpios = <&gpio TEGRA_GPIO(X, 3) GPIO_ACTIVE_LOW>; linux,input-type = <EV_SW>; @@ -1544,7 +1544,7 @@ compatible = "gpio-keys"; interrupt-parent = <&gpio>; - power { + key-power { label = "Power"; gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; @@ -1553,7 +1553,7 @@ wakeup-source; }; - volume-up { + key-volume-up { label = "Volume Up"; gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; @@ -1562,7 +1562,7 @@ wakeup-source; }; - volume-down { + key-volume-down { label = "Volume Down"; gpios = <&gpio TEGRA_GPIO(Q, 3) GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; diff --git a/dts/src/arm/tegra30-cardhu.dtsi b/dts/src/arm/tegra30-cardhu.dtsi index ba257ed36d..540530c983 100644 --- a/dts/src/arm/tegra30-cardhu.dtsi +++ b/dts/src/arm/tegra30-cardhu.dtsi @@ -685,7 +685,7 @@ gpio-keys { compatible = "gpio-keys"; - power { + key-power { label = "Power"; interrupt-parent = <&pmic>; interrupts = <2 0>; @@ -694,14 +694,14 @@ wakeup-source; }; - volume-down { + key-volume-down { label = "Volume Down"; gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; debounce-interval = <10>; }; - volume-up { + key-volume-up { label = "Volume Up"; gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; diff --git a/dts/src/arm/tegra30-colibri-eval-v3.dts b/dts/src/arm/tegra30-colibri-eval-v3.dts index 7d4a6ca493..8dbc15f9a9 100644 --- a/dts/src/arm/tegra30-colibri-eval-v3.dts +++ b/dts/src/arm/tegra30-colibri-eval-v3.dts @@ -145,7 +145,7 @@ gpio-keys { compatible = "gpio-keys"; - wakeup { + key-wakeup { label = "SODIMM pin 45 wakeup"; gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>; linux,code = <KEY_WAKEUP>; diff --git a/dts/src/arm/tegra30-colibri.dtsi b/dts/src/arm/tegra30-colibri.dtsi index 22231d450b..310dff0591 100644 --- a/dts/src/arm/tegra30-colibri.dtsi +++ b/dts/src/arm/tegra30-colibri.dtsi @@ -239,7 +239,7 @@ nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; spdif-in-pk6 { - nvidia,pins = "spdif_in_pk6"; + nvidia,pins = "spdif_in_pk6"; nvidia,function = "hda"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; @@ -364,7 +364,7 @@ }; /* Multiplexed and therefore disabled */ cam-mclk-pcc0 { - nvidia,pins = "cam_mclk_pcc0"; + nvidia,pins = "cam_mclk_pcc0"; nvidia,function = "vi_alt3"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; @@ -511,7 +511,7 @@ /* Colibri USBC_DET */ spdif-out-pk5 { - nvidia,pins = "spdif_out_pk5"; + nvidia,pins = "spdif_out_pk5"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; diff --git a/dts/src/arm/tegra30-ouya.dts b/dts/src/arm/tegra30-ouya.dts index e58dda4f9d..b7acea39b9 100644 --- a/dts/src/arm/tegra30-ouya.dts +++ b/dts/src/arm/tegra30-ouya.dts @@ -4764,7 +4764,7 @@ gpio-keys { compatible = "gpio-keys"; - power { + key-power { gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>; debounce-interval = <10>; linux,code = <KEY_POWER>; diff --git a/dts/src/arm/tegra30-pegatron-chagall.dts b/dts/src/arm/tegra30-pegatron-chagall.dts index 8ce6103529..7c81f02055 100644 --- a/dts/src/arm/tegra30-pegatron-chagall.dts +++ b/dts/src/arm/tegra30-pegatron-chagall.dts @@ -2655,7 +2655,7 @@ compatible = "gpio-keys"; interrupt-parent = <&gpio>; - dock-insert { + switch-dock-insert { label = "Chagall Dock"; gpios = <&gpio TEGRA_GPIO(S, 4) GPIO_ACTIVE_LOW>; linux,input-type = <EV_SW>; @@ -2665,7 +2665,7 @@ wakeup-source; }; - lineout-detect { + switch-lineout-detect { label = "Audio dock line-out detect"; gpios = <&gpio TEGRA_GPIO(S, 3) GPIO_ACTIVE_LOW>; linux,input-type = <EV_SW>; @@ -2688,7 +2688,7 @@ compatible = "gpio-keys"; interrupt-parent = <&gpio>; - power { + key-power { label = "Power"; gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; @@ -2697,7 +2697,7 @@ wakeup-source; }; - volume-up { + key-volume-up { label = "Volume Up"; gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; @@ -2706,7 +2706,7 @@ wakeup-source; }; - volume-down { + key-volume-down { label = "Volume Down"; gpios = <&gpio TEGRA_GPIO(Q, 1) GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; diff --git a/dts/src/arm/uniphier-pxs2.dtsi b/dts/src/arm/uniphier-pxs2.dtsi index e81e5937a6..03301ddb34 100644 --- a/dts/src/arm/uniphier-pxs2.dtsi +++ b/dts/src/arm/uniphier-pxs2.dtsi @@ -597,8 +597,8 @@ compatible = "socionext,uniphier-dwc3", "snps,dwc3"; status = "disabled"; reg = <0x65a00000 0xcd00>; - interrupt-names = "host", "peripheral"; - interrupts = <0 134 4>, <0 135 4>; + interrupt-names = "dwc_usb3"; + interrupts = <0 134 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>; clock-names = "ref", "bus_early", "suspend"; @@ -693,8 +693,8 @@ compatible = "socionext,uniphier-dwc3", "snps,dwc3"; status = "disabled"; reg = <0x65c00000 0xcd00>; - interrupt-names = "host", "peripheral"; - interrupts = <0 137 4>, <0 138 4>; + interrupt-names = "dwc_usb3"; + interrupts = <0 137 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>; clock-names = "ref", "bus_early", "suspend"; diff --git a/dts/src/arm/zynq-zc702.dts b/dts/src/arm/zynq-zc702.dts index cf70aff26c..d23201ba8c 100644 --- a/dts/src/arm/zynq-zc702.dts +++ b/dts/src/arm/zynq-zc702.dts @@ -30,14 +30,14 @@ gpio-keys { compatible = "gpio-keys"; autorepeat; - sw14 { + switch-14 { label = "sw14"; gpios = <&gpio0 12 0>; linux,code = <108>; /* down */ wakeup-source; autorepeat; }; - sw13 { + switch-13 { label = "sw13"; gpios = <&gpio0 14 0>; linux,code = <103>; /* up */ diff --git a/dts/src/arm/zynq-zturn-common.dtsi b/dts/src/arm/zynq-zturn-common.dtsi index bf5d1c4568..dfb1fbafe3 100644 --- a/dts/src/arm/zynq-zturn-common.dtsi +++ b/dts/src/arm/zynq-zturn-common.dtsi @@ -49,7 +49,7 @@ gpio-keys { compatible = "gpio-keys"; autorepeat; - K1 { + key { label = "K1"; gpios = <&gpio0 0x32 0x1>; linux,code = <0x66>; diff --git a/dts/src/arm64/allwinner/sun50i-a100.dtsi b/dts/src/arm64/allwinner/sun50i-a100.dtsi index f6d7d7f7fd..548539c93a 100644 --- a/dts/src/arm64/allwinner/sun50i-a100.dtsi +++ b/dts/src/arm64/allwinner/sun50i-a100.dtsi @@ -203,6 +203,7 @@ i2c0: i2c@5002000 { compatible = "allwinner,sun50i-a100-i2c", + "allwinner,sun8i-v536-i2c", "allwinner,sun6i-a31-i2c"; reg = <0x05002000 0x400>; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; @@ -215,6 +216,7 @@ i2c1: i2c@5002400 { compatible = "allwinner,sun50i-a100-i2c", + "allwinner,sun8i-v536-i2c", "allwinner,sun6i-a31-i2c"; reg = <0x05002400 0x400>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; @@ -227,6 +229,7 @@ i2c2: i2c@5002800 { compatible = "allwinner,sun50i-a100-i2c", + "allwinner,sun8i-v536-i2c", "allwinner,sun6i-a31-i2c"; reg = <0x05002800 0x400>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; @@ -239,6 +242,7 @@ i2c3: i2c@5002c00 { compatible = "allwinner,sun50i-a100-i2c", + "allwinner,sun8i-v536-i2c", "allwinner,sun6i-a31-i2c"; reg = <0x05002c00 0x400>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; @@ -315,6 +319,7 @@ r_i2c0: i2c@7081400 { compatible = "allwinner,sun50i-a100-i2c", + "allwinner,sun8i-v536-i2c", "allwinner,sun6i-a31-i2c"; reg = <0x07081400 0x400>; interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; @@ -329,6 +334,7 @@ r_i2c1: i2c@7081800 { compatible = "allwinner,sun50i-a100-i2c", + "allwinner,sun8i-v536-i2c", "allwinner,sun6i-a31-i2c"; reg = <0x07081800 0x400>; interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; diff --git a/dts/src/arm64/allwinner/sun50i-a64-amarula-relic.dts b/dts/src/arm64/allwinner/sun50i-a64-amarula-relic.dts index f17cc89f47..8233582f62 100644 --- a/dts/src/arm64/allwinner/sun50i-a64-amarula-relic.dts +++ b/dts/src/arm64/allwinner/sun50i-a64-amarula-relic.dts @@ -58,7 +58,7 @@ wifi_pwrseq: wifi-pwrseq { compatible = "mmc-pwrseq-simple"; - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "ext_clock"; reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* WL-PMU-EN: PL2 */ }; diff --git a/dts/src/arm64/allwinner/sun50i-a64-bananapi-m64.dts b/dts/src/arm64/allwinner/sun50i-a64-bananapi-m64.dts index 997a193726..e6d5bc0f7a 100644 --- a/dts/src/arm64/allwinner/sun50i-a64-bananapi-m64.dts +++ b/dts/src/arm64/allwinner/sun50i-a64-bananapi-m64.dts @@ -56,7 +56,7 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "ext_clock"; }; }; @@ -355,7 +355,7 @@ bluetooth { compatible = "brcm,bcm43438-bt"; - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "lpo"; vbat-supply = <®_dldo2>; vddio-supply = <®_dldo4>; diff --git a/dts/src/arm64/allwinner/sun50i-a64-nanopi-a64.dts b/dts/src/arm64/allwinner/sun50i-a64-nanopi-a64.dts index e47ff06a6f..0af6dcdf75 100644 --- a/dts/src/arm64/allwinner/sun50i-a64-nanopi-a64.dts +++ b/dts/src/arm64/allwinner/sun50i-a64-nanopi-a64.dts @@ -43,7 +43,7 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "ext_clock"; reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ }; diff --git a/dts/src/arm64/allwinner/sun50i-a64-orangepi-win.dts b/dts/src/arm64/allwinner/sun50i-a64-orangepi-win.dts index c519d9fa69..4f8529d5ac 100644 --- a/dts/src/arm64/allwinner/sun50i-a64-orangepi-win.dts +++ b/dts/src/arm64/allwinner/sun50i-a64-orangepi-win.dts @@ -40,7 +40,7 @@ leds { compatible = "gpio-leds"; - status { + led-0 { label = "orangepi:green:status"; gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ }; @@ -71,7 +71,7 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */ - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "ext_clock"; }; }; @@ -369,7 +369,7 @@ bluetooth { compatible = "brcm,bcm43438-bt"; max-speed = <1500000>; - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "lpo"; vbat-supply = <®_dldo2>; vddio-supply = <®_dldo4>; diff --git a/dts/src/arm64/allwinner/sun50i-a64-pinebook.dts b/dts/src/arm64/allwinner/sun50i-a64-pinebook.dts index 63571df24d..620cb3ef5f 100644 --- a/dts/src/arm64/allwinner/sun50i-a64-pinebook.dts +++ b/dts/src/arm64/allwinner/sun50i-a64-pinebook.dts @@ -35,10 +35,10 @@ stdout-path = "serial0:115200n8"; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - lid_switch { + lid-switch { label = "Lid Switch"; gpios = <&r_pio 0 12 GPIO_ACTIVE_LOW>; /* PL12 */ linux,input-type = <EV_SW>; diff --git a/dts/src/arm64/allwinner/sun50i-a64-pinephone-1.0.dts b/dts/src/arm64/allwinner/sun50i-a64-pinephone-1.0.dts index fb65319a3b..219f720b8b 100644 --- a/dts/src/arm64/allwinner/sun50i-a64-pinephone-1.0.dts +++ b/dts/src/arm64/allwinner/sun50i-a64-pinephone-1.0.dts @@ -10,6 +10,10 @@ compatible = "pine64,pinephone-1.0", "pine64,pinephone", "allwinner,sun50i-a64"; }; +&codec_analog { + allwinner,internal-bias-resistor; +}; + &sgm3140 { enable-gpios = <&pio 2 3 GPIO_ACTIVE_HIGH>; /* PC3 */ flash-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */ diff --git a/dts/src/arm64/allwinner/sun50i-a64-pinephone-1.1.dts b/dts/src/arm64/allwinner/sun50i-a64-pinephone-1.1.dts index 5e59d37521..723af64a9c 100644 --- a/dts/src/arm64/allwinner/sun50i-a64-pinephone-1.1.dts +++ b/dts/src/arm64/allwinner/sun50i-a64-pinephone-1.1.dts @@ -29,6 +29,10 @@ default-brightness-level = <400>; }; +&codec_analog { + allwinner,internal-bias-resistor; +}; + &sgm3140 { enable-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */ flash-gpios = <&pio 2 3 GPIO_ACTIVE_HIGH>; /* PC3 */ diff --git a/dts/src/arm64/allwinner/sun50i-a64.dtsi b/dts/src/arm64/allwinner/sun50i-a64.dtsi index de77c87481..77b5349f60 100644 --- a/dts/src/arm64/allwinner/sun50i-a64.dtsi +++ b/dts/src/arm64/allwinner/sun50i-a64.dtsi @@ -4,6 +4,7 @@ // Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com> #include <dt-bindings/clock/sun50i-a64-ccu.h> +#include <dt-bindings/clock/sun6i-rtc.h> #include <dt-bindings/clock/sun8i-de2.h> #include <dt-bindings/clock/sun8i-r-ccu.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -660,7 +661,7 @@ ccu: clock@1c20000 { compatible = "allwinner,sun50i-a64-ccu"; reg = <0x01c20000 0x400>; - clocks = <&osc24M>, <&rtc 0>; + clocks = <&osc24M>, <&rtc CLK_OSC32K>; clock-names = "hosc", "losc"; #clock-cells = <1>; #reset-cells = <1>; @@ -673,7 +674,8 @@ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>; + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, + <&rtc CLK_OSC32K>; clock-names = "apb", "hosc", "losc"; gpio-controller; #gpio-cells = <3>; @@ -1226,7 +1228,7 @@ reg-io-width = <1>; interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>, - <&ccu CLK_HDMI>, <&rtc 0>; + <&ccu CLK_HDMI>, <&rtc CLK_OSC32K>; clock-names = "iahb", "isfr", "tmds", "cec"; resets = <&ccu RST_BUS_HDMI1>; reset-names = "ctrl"; @@ -1287,7 +1289,7 @@ r_ccu: clock@1f01400 { compatible = "allwinner,sun50i-a64-r-ccu"; reg = <0x01f01400 0x100>; - clocks = <&osc24M>, <&rtc 0>, <&rtc 2>, + clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>, <&ccu CLK_PLL_PERIPH0>; clock-names = "hosc", "losc", "iosc", "pll-periph"; #clock-cells = <1>; diff --git a/dts/src/arm64/allwinner/sun50i-h5-nanopi-r1s-h5.dts b/dts/src/arm64/allwinner/sun50i-h5-nanopi-r1s-h5.dts index 55b369534a..a3e040da38 100644 --- a/dts/src/arm64/allwinner/sun50i-h5-nanopi-r1s-h5.dts +++ b/dts/src/arm64/allwinner/sun50i-h5-nanopi-r1s-h5.dts @@ -52,10 +52,10 @@ }; }; - r-gpio-keys { + gpio-keys { compatible = "gpio-keys"; - reset { + key-reset { label = "reset"; linux,code = <KEY_RESTART>; gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm64/allwinner/sun50i-h5-orangepi-pc2.dts b/dts/src/arm64/allwinner/sun50i-h5-orangepi-pc2.dts index 1010c1b22d..b5c1ff19b4 100644 --- a/dts/src/arm64/allwinner/sun50i-h5-orangepi-pc2.dts +++ b/dts/src/arm64/allwinner/sun50i-h5-orangepi-pc2.dts @@ -54,10 +54,10 @@ }; }; - r-gpio-keys { + gpio-keys { compatible = "gpio-keys"; - sw4 { + key-sw4 { label = "sw4"; linux,code = <BTN_0>; gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm64/allwinner/sun50i-h5-orangepi-prime.dts b/dts/src/arm64/allwinner/sun50i-h5-orangepi-prime.dts index 74e0444af1..d7f8bad6bb 100644 --- a/dts/src/arm64/allwinner/sun50i-h5-orangepi-prime.dts +++ b/dts/src/arm64/allwinner/sun50i-h5-orangepi-prime.dts @@ -48,10 +48,10 @@ }; }; - r-gpio-keys { + gpio-keys { compatible = "gpio-keys"; - sw4 { + key-sw4 { label = "sw4"; linux,code = <BTN_0>; gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm64/allwinner/sun50i-h6-orangepi-3.dts b/dts/src/arm64/allwinner/sun50i-h6-orangepi-3.dts index c45d7b7fb3..6fc65e8db2 100644 --- a/dts/src/arm64/allwinner/sun50i-h6-orangepi-3.dts +++ b/dts/src/arm64/allwinner/sun50i-h6-orangepi-3.dts @@ -86,7 +86,7 @@ wifi_pwrseq: wifi-pwrseq { compatible = "mmc-pwrseq-simple"; - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "ext_clock"; reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */ post-power-on-delay-ms = <200>; @@ -314,7 +314,7 @@ bluetooth { compatible = "brcm,bcm4345c5"; - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "lpo"; device-wakeup-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */ host-wakeup-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */ diff --git a/dts/src/arm64/allwinner/sun50i-h6-orangepi-lite2.dts b/dts/src/arm64/allwinner/sun50i-h6-orangepi-lite2.dts index e8770858b5..fb31dcb1cb 100644 --- a/dts/src/arm64/allwinner/sun50i-h6-orangepi-lite2.dts +++ b/dts/src/arm64/allwinner/sun50i-h6-orangepi-lite2.dts @@ -13,7 +13,7 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "ext_clock"; reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */ post-power-on-delay-ms = <200>; @@ -64,7 +64,7 @@ bluetooth { compatible = "brcm,bcm4345c5"; - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "lpo"; device-wakeup-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */ host-wakeup-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */ diff --git a/dts/src/arm64/allwinner/sun50i-h6-tanix.dtsi b/dts/src/arm64/allwinner/sun50i-h6-tanix.dtsi index edb71e4a03..4903d63581 100644 --- a/dts/src/arm64/allwinner/sun50i-h6-tanix.dtsi +++ b/dts/src/arm64/allwinner/sun50i-h6-tanix.dtsi @@ -78,7 +78,7 @@ wifi_pwrseq: wifi-pwrseq { compatible = "mmc-pwrseq-simple"; - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "ext_clock"; reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */ }; diff --git a/dts/src/arm64/allwinner/sun50i-h6.dtsi b/dts/src/arm64/allwinner/sun50i-h6.dtsi index fbe94abbb1..5a28303d3d 100644 --- a/dts/src/arm64/allwinner/sun50i-h6.dtsi +++ b/dts/src/arm64/allwinner/sun50i-h6.dtsi @@ -4,6 +4,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/sun50i-h6-ccu.h> #include <dt-bindings/clock/sun50i-h6-r-ccu.h> +#include <dt-bindings/clock/sun6i-rtc.h> #include <dt-bindings/clock/sun8i-de2.h> #include <dt-bindings/clock/sun8i-tcon-top.h> #include <dt-bindings/reset/sun50i-h6-ccu.h> @@ -237,7 +238,7 @@ ccu: clock@3001000 { compatible = "allwinner,sun50i-h6-ccu"; reg = <0x03001000 0x1000>; - clocks = <&osc24M>, <&rtc 0>, <&rtc 2>; + clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>; clock-names = "hosc", "losc", "iosc"; #clock-cells = <1>; #reset-cells = <1>; @@ -317,7 +318,7 @@ <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_APB1>, <&osc24M>, <&rtc 0>; + clocks = <&ccu CLK_APB1>, <&osc24M>, <&rtc CLK_OSC32K>; clock-names = "apb", "hosc", "losc"; gpio-controller; #gpio-cells = <3>; @@ -725,7 +726,7 @@ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_XHCI>, <&ccu CLK_BUS_XHCI>, - <&rtc 0>; + <&rtc CLK_OSC32K>; clock-names = "ref", "bus_early", "suspend"; resets = <&ccu RST_BUS_XHCI>; /* @@ -931,7 +932,7 @@ r_ccu: clock@7010000 { compatible = "allwinner,sun50i-h6-r-ccu"; reg = <0x07010000 0x400>; - clocks = <&osc24M>, <&rtc 0>, <&rtc 2>, + clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>, <&ccu CLK_PLL_PERIPH0>; clock-names = "hosc", "losc", "iosc", "pll-periph"; #clock-cells = <1>; @@ -960,7 +961,8 @@ interrupt-parent = <&r_intc>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&r_ccu CLK_R_APB1>, <&osc24M>, <&rtc 0>; + clocks = <&r_ccu CLK_R_APB1>, <&osc24M>, + <&rtc CLK_OSC32K>; clock-names = "apb", "hosc", "losc"; gpio-controller; #gpio-cells = <3>; diff --git a/dts/src/arm64/allwinner/sun50i-h616-orangepi-zero2.dts b/dts/src/arm64/allwinner/sun50i-h616-orangepi-zero2.dts new file mode 100644 index 0000000000..02893f3ac9 --- /dev/null +++ b/dts/src/arm64/allwinner/sun50i-h616-orangepi-zero2.dts @@ -0,0 +1,213 @@ +// SPDX-License-Identifier: (GPL-2.0+ or MIT) +/* + * Copyright (C) 2020 Arm Ltd. + */ + +/dts-v1/; + +#include "sun50i-h616.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "OrangePi Zero2"; + compatible = "xunlong,orangepi-zero2", "allwinner,sun50i-h616"; + + aliases { + ethernet0 = &emac0; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_RED>; + gpios = <&pio 2 12 GPIO_ACTIVE_HIGH>; /* PC12 */ + default-state = "on"; + }; + + led-1 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + gpios = <&pio 2 13 GPIO_ACTIVE_HIGH>; /* PC13 */ + }; + }; + + reg_vcc5v: vcc5v { + /* board wide 5V supply directly from the USB-C socket */ + compatible = "regulator-fixed"; + regulator-name = "vcc-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; +}; + +&emac0 { + pinctrl-names = "default"; + pinctrl-0 = <&ext_rgmii_pins>; + phy-mode = "rgmii"; + phy-handle = <&ext_rgmii_phy>; + phy-supply = <®_dcdce>; + allwinner,rx-delay-ps = <3100>; + allwinner,tx-delay-ps = <700>; + status = "okay"; +}; + +&mdio0 { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + +&mmc0 { + vmmc-supply = <®_dcdce>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ + bus-width = <4>; + status = "okay"; +}; + +&r_rsb { + status = "okay"; + + axp305: pmic@745 { + compatible = "x-powers,axp305", "x-powers,axp805", + "x-powers,axp806"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x745>; + + x-powers,self-working-mode; + vina-supply = <®_vcc5v>; + vinb-supply = <®_vcc5v>; + vinc-supply = <®_vcc5v>; + vind-supply = <®_vcc5v>; + vine-supply = <®_vcc5v>; + aldoin-supply = <®_vcc5v>; + bldoin-supply = <®_vcc5v>; + cldoin-supply = <®_vcc5v>; + + regulators { + reg_aldo1: aldo1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-sys"; + }; + + reg_aldo2: aldo2 { /* 3.3V on headers */ + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v3-ext"; + }; + + reg_aldo3: aldo3 { /* 3.3V on headers */ + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v3-ext2"; + }; + + reg_bldo1: bldo1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc1v8"; + }; + + bldo2 { + /* unused */ + }; + + bldo3 { + /* unused */ + }; + + bldo4 { + /* unused */ + }; + + cldo1 { + /* reserved */ + }; + + cldo2 { + /* unused */ + }; + + cldo3 { + /* unused */ + }; + + reg_dcdca: dcdca { + regulator-always-on; + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpu"; + }; + + reg_dcdcc: dcdcc { + regulator-always-on; + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <990000>; + regulator-name = "vdd-gpu-sys"; + }; + + reg_dcdcd: dcdcd { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vdd-dram"; + }; + + reg_dcdce: dcdce { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-eth-mmc"; + }; + + sw { + /* unused */ + }; + }; + }; +}; + +&pio { + vcc-pc-supply = <®_aldo1>; + vcc-pf-supply = <®_aldo1>; + vcc-pg-supply = <®_bldo1>; + vcc-ph-supply = <®_aldo1>; + vcc-pi-supply = <®_aldo1>; +}; + +&spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>, <&spi0_cs0_pin>; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_ph_pins>; + status = "okay"; +}; diff --git a/dts/src/arm64/allwinner/sun50i-h616-x96-mate.dts b/dts/src/arm64/allwinner/sun50i-h616-x96-mate.dts new file mode 100644 index 0000000000..6619db3471 --- /dev/null +++ b/dts/src/arm64/allwinner/sun50i-h616-x96-mate.dts @@ -0,0 +1,177 @@ +// SPDX-License-Identifier: (GPL-2.0+ or MIT) +/* + * Copyright (C) 2021 Arm Ltd. + */ + +/dts-v1/; + +#include "sun50i-h616.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + model = "X96 Mate"; + compatible = "hechuang,x96-mate", "allwinner,sun50i-h616"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reg_vcc5v: vcc5v { + /* board wide 5V supply directly from the DC input */ + compatible = "regulator-fixed"; + regulator-name = "vcc-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; +}; + +&ir { + status = "okay"; +}; + +&mmc0 { + vmmc-supply = <®_dcdce>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ + bus-width = <4>; + status = "okay"; +}; + +&mmc2 { + vmmc-supply = <®_dcdce>; + vqmmc-supply = <®_bldo1>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + status = "okay"; +}; + +&r_rsb { + status = "okay"; + + axp305: pmic@745 { + compatible = "x-powers,axp305", "x-powers,axp805", + "x-powers,axp806"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x745>; + + x-powers,self-working-mode; + vina-supply = <®_vcc5v>; + vinb-supply = <®_vcc5v>; + vinc-supply = <®_vcc5v>; + vind-supply = <®_vcc5v>; + vine-supply = <®_vcc5v>; + aldoin-supply = <®_vcc5v>; + bldoin-supply = <®_vcc5v>; + cldoin-supply = <®_vcc5v>; + + regulators { + reg_aldo1: aldo1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-sys"; + }; + + /* Enabled by the Android BSP */ + reg_aldo2: aldo2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v3-ext"; + status = "disabled"; + }; + + /* Enabled by the Android BSP */ + reg_aldo3: aldo3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v3-ext2"; + status = "disabled"; + }; + + reg_bldo1: bldo1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc1v8"; + }; + + /* Enabled by the Android BSP */ + reg_bldo2: bldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc1v8-2"; + status = "disabled"; + }; + + bldo3 { + /* unused */ + }; + + bldo4 { + /* unused */ + }; + + cldo1 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-name = "vcc2v5"; + }; + + cldo2 { + /* unused */ + }; + + cldo3 { + /* unused */ + }; + + reg_dcdca: dcdca { + regulator-always-on; + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpu"; + }; + + reg_dcdcc: dcdcc { + regulator-always-on; + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <990000>; + regulator-name = "vdd-gpu-sys"; + }; + + reg_dcdcd: dcdcd { + regulator-always-on; + regulator-min-microvolt = <1360000>; + regulator-max-microvolt = <1360000>; + regulator-name = "vdd-dram"; + }; + + reg_dcdce: dcdce { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-eth-mmc"; + }; + + sw { + /* unused */ + }; + }; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_ph_pins>; + status = "okay"; +}; diff --git a/dts/src/arm64/allwinner/sun50i-h616.dtsi b/dts/src/arm64/allwinner/sun50i-h616.dtsi new file mode 100644 index 0000000000..622a1f7d16 --- /dev/null +++ b/dts/src/arm64/allwinner/sun50i-h616.dtsi @@ -0,0 +1,591 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2020 Arm Ltd. +// based on the H6 dtsi, which is: +// Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io> + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/sun50i-h616-ccu.h> +#include <dt-bindings/clock/sun50i-h6-r-ccu.h> +#include <dt-bindings/clock/sun6i-rtc.h> +#include <dt-bindings/reset/sun50i-h616-ccu.h> +#include <dt-bindings/reset/sun50i-h6-r-ccu.h> + +/ { + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <0>; + enable-method = "psci"; + clocks = <&ccu CLK_CPUX>; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <1>; + enable-method = "psci"; + clocks = <&ccu CLK_CPUX>; + }; + + cpu2: cpu@2 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <2>; + enable-method = "psci"; + clocks = <&ccu CLK_CPUX>; + }; + + cpu3: cpu@3 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <3>; + enable-method = "psci"; + clocks = <&ccu CLK_CPUX>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* + * 256 KiB reserved for Trusted Firmware-A (BL31). + * This is added by BL31 itself, but some bootloaders fail + * to propagate this into the DTB handed to kernels. + */ + secmon@40000000 { + reg = <0x0 0x40000000 0x0 0x40000>; + no-map; + }; + }; + + osc24M: osc24M-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "osc24M"; + }; + + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + arm,no-tick-in-suspend; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x0 0x40000000>; + + syscon: syscon@3000000 { + compatible = "allwinner,sun50i-h616-system-control"; + reg = <0x03000000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sram_c: sram@28000 { + compatible = "mmio-sram"; + reg = <0x00028000 0x30000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00028000 0x30000>; + }; + }; + + ccu: clock@3001000 { + compatible = "allwinner,sun50i-h616-ccu"; + reg = <0x03001000 0x1000>; + clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>; + clock-names = "hosc", "losc", "iosc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + watchdog: watchdog@30090a0 { + compatible = "allwinner,sun50i-h616-wdt", + "allwinner,sun6i-a31-wdt"; + reg = <0x030090a0 0x20>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc24M>; + }; + + pio: pinctrl@300b000 { + compatible = "allwinner,sun50i-h616-pinctrl"; + reg = <0x0300b000 0x400>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_APB1>, <&osc24M>, <&rtc CLK_OSC32K>; + clock-names = "apb", "hosc", "losc"; + gpio-controller; + #gpio-cells = <3>; + interrupt-controller; + #interrupt-cells = <3>; + + ext_rgmii_pins: rgmii-pins { + pins = "PI0", "PI1", "PI2", "PI3", "PI4", + "PI5", "PI7", "PI8", "PI9", "PI10", + "PI11", "PI12", "PI13", "PI14", "PI15", + "PI16"; + function = "emac0"; + drive-strength = <40>; + }; + + i2c0_pins: i2c0-pins { + pins = "PI6", "PI7"; + function = "i2c0"; + }; + + i2c3_ph_pins: i2c3-ph-pins { + pins = "PH4", "PH5"; + function = "i2c3"; + }; + + ir_rx_pin: ir-rx-pin { + pins = "PH10"; + function = "ir_rx"; + }; + + mmc0_pins: mmc0-pins { + pins = "PF0", "PF1", "PF2", "PF3", + "PF4", "PF5"; + function = "mmc0"; + drive-strength = <30>; + bias-pull-up; + }; + + /omit-if-no-ref/ + mmc1_pins: mmc1-pins { + pins = "PG0", "PG1", "PG2", "PG3", + "PG4", "PG5"; + function = "mmc1"; + drive-strength = <30>; + bias-pull-up; + }; + + mmc2_pins: mmc2-pins { + pins = "PC0", "PC1", "PC5", "PC6", + "PC8", "PC9", "PC10", "PC11", + "PC13", "PC14", "PC15", "PC16"; + function = "mmc2"; + drive-strength = <30>; + bias-pull-up; + }; + + /omit-if-no-ref/ + spi0_pins: spi0-pins { + pins = "PC0", "PC2", "PC4"; + function = "spi0"; + }; + + /omit-if-no-ref/ + spi0_cs0_pin: spi0-cs0-pin { + pins = "PC3"; + function = "spi0"; + }; + + /omit-if-no-ref/ + spi1_pins: spi1-pins { + pins = "PH6", "PH7", "PH8"; + function = "spi1"; + }; + + /omit-if-no-ref/ + spi1_cs0_pin: spi1-cs0-pin { + pins = "PH5"; + function = "spi1"; + }; + + uart0_ph_pins: uart0-ph-pins { + pins = "PH0", "PH1"; + function = "uart0"; + }; + + /omit-if-no-ref/ + uart1_pins: uart1-pins { + pins = "PG6", "PG7"; + function = "uart1"; + }; + + /omit-if-no-ref/ + uart1_rts_cts_pins: uart1-rts-cts-pins { + pins = "PG8", "PG9"; + function = "uart1"; + }; + }; + + gic: interrupt-controller@3021000 { + compatible = "arm,gic-400"; + reg = <0x03021000 0x1000>, + <0x03022000 0x2000>, + <0x03024000 0x2000>, + <0x03026000 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + interrupt-controller; + #interrupt-cells = <3>; + }; + + mmc0: mmc@4020000 { + compatible = "allwinner,sun50i-h616-mmc", + "allwinner,sun50i-a100-mmc"; + reg = <0x04020000 0x1000>; + clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>; + clock-names = "ahb", "mmc"; + resets = <&ccu RST_BUS_MMC0>; + reset-names = "ahb"; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + status = "disabled"; + max-frequency = <150000000>; + cap-sd-highspeed; + cap-mmc-highspeed; + mmc-ddr-3_3v; + cap-sdio-irq; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc1: mmc@4021000 { + compatible = "allwinner,sun50i-h616-mmc", + "allwinner,sun50i-a100-mmc"; + reg = <0x04021000 0x1000>; + clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>; + clock-names = "ahb", "mmc"; + resets = <&ccu RST_BUS_MMC1>; + reset-names = "ahb"; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + status = "disabled"; + max-frequency = <150000000>; + cap-sd-highspeed; + cap-mmc-highspeed; + mmc-ddr-3_3v; + cap-sdio-irq; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc2: mmc@4022000 { + compatible = "allwinner,sun50i-h616-emmc", + "allwinner,sun50i-a100-emmc"; + reg = <0x04022000 0x1000>; + clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>; + clock-names = "ahb", "mmc"; + resets = <&ccu RST_BUS_MMC2>; + reset-names = "ahb"; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + status = "disabled"; + max-frequency = <150000000>; + cap-sd-highspeed; + cap-mmc-highspeed; + mmc-ddr-3_3v; + cap-sdio-irq; + #address-cells = <1>; + #size-cells = <0>; + }; + + uart0: serial@5000000 { + compatible = "snps,dw-apb-uart"; + reg = <0x05000000 0x400>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART0>; + resets = <&ccu RST_BUS_UART0>; + status = "disabled"; + }; + + uart1: serial@5000400 { + compatible = "snps,dw-apb-uart"; + reg = <0x05000400 0x400>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART1>; + resets = <&ccu RST_BUS_UART1>; + status = "disabled"; + }; + + uart2: serial@5000800 { + compatible = "snps,dw-apb-uart"; + reg = <0x05000800 0x400>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART2>; + resets = <&ccu RST_BUS_UART2>; + status = "disabled"; + }; + + uart3: serial@5000c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x05000c00 0x400>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART3>; + resets = <&ccu RST_BUS_UART3>; + status = "disabled"; + }; + + uart4: serial@5001000 { + compatible = "snps,dw-apb-uart"; + reg = <0x05001000 0x400>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART4>; + resets = <&ccu RST_BUS_UART4>; + status = "disabled"; + }; + + uart5: serial@5001400 { + compatible = "snps,dw-apb-uart"; + reg = <0x05001400 0x400>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART5>; + resets = <&ccu RST_BUS_UART5>; + status = "disabled"; + }; + + i2c0: i2c@5002000 { + compatible = "allwinner,sun50i-h616-i2c", + "allwinner,sun8i-v536-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x05002000 0x400>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2C0>; + resets = <&ccu RST_BUS_I2C0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c1: i2c@5002400 { + compatible = "allwinner,sun50i-h616-i2c", + "allwinner,sun8i-v536-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x05002400 0x400>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2C1>; + resets = <&ccu RST_BUS_I2C1>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c2: i2c@5002800 { + compatible = "allwinner,sun50i-h616-i2c", + "allwinner,sun8i-v536-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x05002800 0x400>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2C2>; + resets = <&ccu RST_BUS_I2C2>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c3: i2c@5002c00 { + compatible = "allwinner,sun50i-h616-i2c", + "allwinner,sun8i-v536-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x05002c00 0x400>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2C3>; + resets = <&ccu RST_BUS_I2C3>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c4: i2c@5003000 { + compatible = "allwinner,sun50i-h616-i2c", + "allwinner,sun8i-v536-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x05003000 0x400>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2C4>; + resets = <&ccu RST_BUS_I2C4>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi0: spi@5010000 { + compatible = "allwinner,sun50i-h616-spi", + "allwinner,sun8i-h3-spi"; + reg = <0x05010000 0x1000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>; + clock-names = "ahb", "mod"; + resets = <&ccu RST_BUS_SPI0>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi1: spi@5011000 { + compatible = "allwinner,sun50i-h616-spi", + "allwinner,sun8i-h3-spi"; + reg = <0x05011000 0x1000>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>; + clock-names = "ahb", "mod"; + resets = <&ccu RST_BUS_SPI1>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + emac0: ethernet@5020000 { + compatible = "allwinner,sun50i-h616-emac0", + "allwinner,sun50i-a64-emac"; + reg = <0x05020000 0x10000>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + clocks = <&ccu CLK_BUS_EMAC0>; + clock-names = "stmmaceth"; + resets = <&ccu RST_BUS_EMAC0>; + reset-names = "stmmaceth"; + syscon = <&syscon>; + status = "disabled"; + + mdio0: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + rtc: rtc@7000000 { + compatible = "allwinner,sun50i-h616-rtc"; + reg = <0x07000000 0x400>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&r_ccu CLK_R_APB1_RTC>, <&osc24M>, + <&ccu CLK_PLL_SYSTEM_32K>; + clock-names = "bus", "hosc", + "pll-32k"; + #clock-cells = <1>; + }; + + r_ccu: clock@7010000 { + compatible = "allwinner,sun50i-h616-r-ccu"; + reg = <0x07010000 0x210>; + clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>, + <&ccu CLK_PLL_PERIPH0>; + clock-names = "hosc", "losc", "iosc", "pll-periph"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + r_pio: pinctrl@7022000 { + compatible = "allwinner,sun50i-h616-r-pinctrl"; + reg = <0x07022000 0x400>; + clocks = <&r_ccu CLK_R_APB1>, <&osc24M>, + <&rtc CLK_OSC32K>; + clock-names = "apb", "hosc", "losc"; + gpio-controller; + #gpio-cells = <3>; + + /omit-if-no-ref/ + r_i2c_pins: r-i2c-pins { + pins = "PL0", "PL1"; + function = "s_i2c"; + }; + + r_rsb_pins: r-rsb-pins { + pins = "PL0", "PL1"; + function = "s_rsb"; + }; + }; + + ir: ir@7040000 { + compatible = "allwinner,sun50i-h616-ir", + "allwinner,sun6i-a31-ir"; + reg = <0x07040000 0x400>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&r_ccu CLK_R_APB1_IR>, + <&r_ccu CLK_IR>; + clock-names = "apb", "ir"; + resets = <&r_ccu RST_R_APB1_IR>; + pinctrl-names = "default"; + pinctrl-0 = <&ir_rx_pin>; + status = "disabled"; + }; + + r_i2c: i2c@7081400 { + compatible = "allwinner,sun50i-h616-i2c", + "allwinner,sun8i-v536-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x07081400 0x400>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&r_ccu CLK_R_APB2_I2C>; + resets = <&r_ccu RST_R_APB2_I2C>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + r_rsb: rsb@7083000 { + compatible = "allwinner,sun50i-h616-rsb", + "allwinner,sun8i-a23-rsb"; + reg = <0x07083000 0x400>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&r_ccu CLK_R_APB2_RSB>; + clock-frequency = <3000000>; + resets = <&r_ccu RST_R_APB2_RSB>; + pinctrl-names = "default"; + pinctrl-0 = <&r_rsb_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; diff --git a/dts/src/arm64/altera/socfpga_stratix10.dtsi b/dts/src/arm64/altera/socfpga_stratix10.dtsi index aa2bba7526..14c220d878 100644 --- a/dts/src/arm64/altera/socfpga_stratix10.dtsi +++ b/dts/src/arm64/altera/socfpga_stratix10.dtsi @@ -97,6 +97,34 @@ <0x0 0xfffc6000 0x0 0x2000>; }; + clocks { + cb_intosc_hs_div2_clk: cb-intosc-hs-div2-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + }; + + cb_intosc_ls_clk: cb-intosc-ls-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + }; + + f2s_free_clk: f2s-free-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + }; + + osc1: osc1 { + #clock-cells = <0>; + compatible = "fixed-clock"; + }; + + qspi_clk: qspi-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <200000000>; + }; + }; + soc { #address-cells = <1>; #size-cells = <1>; @@ -119,34 +147,6 @@ #clock-cells = <1>; }; - clocks { - cb_intosc_hs_div2_clk: cb-intosc-hs-div2-clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - }; - - cb_intosc_ls_clk: cb-intosc-ls-clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - }; - - f2s_free_clk: f2s-free-clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - }; - - osc1: osc1 { - #clock-cells = <0>; - compatible = "fixed-clock"; - }; - - qspi_clk: qspi-clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <200000000>; - }; - }; - gmac0: ethernet@ff800000 { compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.74a", "snps,dwmac"; reg = <0xff800000 0x2000>; @@ -594,7 +594,7 @@ }; qspi: spi@ff8d2000 { - compatible = "intel,socfpga-qspi", "cdns,qspi-nor"; + compatible = "intel,socfpga-qspi", "cdns,qspi-nor"; #address-cells = <1>; #size-cells = <0>; reg = <0xff8d2000 0x100>, diff --git a/dts/src/arm64/altera/socfpga_stratix10_socdk.dts b/dts/src/arm64/altera/socfpga_stratix10_socdk.dts index 5159cd5771..48424e459f 100644 --- a/dts/src/arm64/altera/socfpga_stratix10_socdk.dts +++ b/dts/src/arm64/altera/socfpga_stratix10_socdk.dts @@ -52,12 +52,6 @@ }; soc { - clocks { - osc1 { - clock-frequency = <25000000>; - }; - }; - eccmgr { sdmmca-ecc@ff8c8c00 { compatible = "altr,socfpga-s10-sdmmc-ecc", @@ -113,6 +107,10 @@ bus-width = <4>; }; +&osc1 { + clock-frequency = <25000000>; +}; + &uart0 { status = "okay"; }; diff --git a/dts/src/arm64/altera/socfpga_stratix10_socdk_nand.dts b/dts/src/arm64/altera/socfpga_stratix10_socdk_nand.dts index 0ab676c639..847a7c01f5 100644 --- a/dts/src/arm64/altera/socfpga_stratix10_socdk_nand.dts +++ b/dts/src/arm64/altera/socfpga_stratix10_socdk_nand.dts @@ -52,12 +52,6 @@ }; soc { - clocks { - osc1 { - clock-frequency = <25000000>; - }; - }; - eccmgr { sdmmca-ecc@ff8c8c00 { compatible = "altr,socfpga-s10-sdmmc-ecc", @@ -126,6 +120,10 @@ }; }; +&osc1 { + clock-frequency = <25000000>; +}; + &uart0 { status = "okay"; }; diff --git a/dts/src/arm64/altera/socfpga_stratix10_swvp.dts b/dts/src/arm64/altera/socfpga_stratix10_swvp.dts new file mode 100644 index 0000000000..a8db585739 --- /dev/null +++ b/dts/src/arm64/altera/socfpga_stratix10_swvp.dts @@ -0,0 +1,117 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2022, Intel Corporation + */ + +#include "socfpga_stratix10.dtsi" + +/ { + model = "SOCFPGA Stratix 10 SWVP"; + compatible = "altr,socfpga-stratix10-swvp", "altr,socfpga-stratix10"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + + timer0 = &timer0; + timer1 = &timer1; + timer2 = &timer2; + timer3 = &timer3; + + ethernet0 = &gmac0; + ethernet1 = &gmac1; + ethernet2 = &gmac2; + }; + + chosen { + stdout-path = "serial1:115200n8"; + linux,initrd-start = <0x10000000>; + linux,initrd-end = <0x125c8324>; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; +}; + +&cpu0 { + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x0000fff8>; +}; + +&cpu1 { + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x0000fff8>; +}; + +&cpu2 { + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x0000fff8>; +}; + +&cpu3 { + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x0000fff8>; +}; + +&osc1 { + clock-frequency = <25000000>; +}; + +&gmac0 { + status = "okay"; + phy-mode = "rgmii"; + phy-addr = <0xffffffff>; + snps,max-mtu = <0x0>; +}; + +&gmac1 { + status = "okay"; + phy-mode = "rgmii"; + phy-addr = <0xffffffff>; +}; + +&gmac2 { + status = "okay"; + phy-mode = "rgmii"; + phy-addr = <0xffffffff>; +}; + +&mmc { + status = "okay"; + altr,dw-mshc-ciu-div = <0x3>; + altr,dw-mshc-sdr-timing = <0x0 0x3>; + cap-sd-highspeed; + cap-mmc-highspeed; + broken-cd; + bus-width = <4>; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usb0 { + clocks = <&clkmgr STRATIX10_L4_MP_CLK>; + status = "okay"; +}; + +&usb1 { + clocks = <&clkmgr STRATIX10_L4_MP_CLK>; + status = "okay"; +}; + +&rst { + altr,modrst-offset = <0x20>; +}; + +&sysmgr { + reg = <0xffd12000 0x1000>; + interrupts = <0x0 0x10 0x4>; + cpu1-start-addr = <0xffd06230>; +}; diff --git a/dts/src/arm64/amd/amd-overdrive-rev-b0.dts b/dts/src/arm64/amd/amd-overdrive-rev-b0.dts index c290d1ce2b..02bff65e5f 100644 --- a/dts/src/arm64/amd/amd-overdrive-rev-b0.dts +++ b/dts/src/arm64/amd/amd-overdrive-rev-b0.dts @@ -20,8 +20,8 @@ }; psci { - compatible = "arm,psci-0.2"; - method = "smc"; + compatible = "arm,psci-0.2"; + method = "smc"; }; }; diff --git a/dts/src/arm64/amd/amd-overdrive-rev-b1.dts b/dts/src/arm64/amd/amd-overdrive-rev-b1.dts index e0926f6bb7..07dab1f1e3 100644 --- a/dts/src/arm64/amd/amd-overdrive-rev-b1.dts +++ b/dts/src/arm64/amd/amd-overdrive-rev-b1.dts @@ -20,8 +20,8 @@ }; psci { - compatible = "arm,psci-0.2"; - method = "smc"; + compatible = "arm,psci-0.2"; + method = "smc"; }; }; diff --git a/dts/src/arm64/amlogic/meson-axg.dtsi b/dts/src/arm64/amlogic/meson-axg.dtsi index 3f5254eeb4..04f797b5a0 100644 --- a/dts/src/arm64/amlogic/meson-axg.dtsi +++ b/dts/src/arm64/amlogic/meson-axg.dtsi @@ -1535,7 +1535,7 @@ sysctrl_AO: sys-ctrl@0 { compatible = "amlogic,meson-axg-ao-sysctrl", "simple-mfd", "syscon"; - reg = <0x0 0x0 0x0 0x100>; + reg = <0x0 0x0 0x0 0x100>; clkc_AO: clock-controller { compatible = "amlogic,meson-axg-aoclkc"; diff --git a/dts/src/arm64/amlogic/meson-g12b-gsking-x.dts b/dts/src/arm64/amlogic/meson-g12b-gsking-x.dts index 6c7bfacbad..1fa6e75abd 100644 --- a/dts/src/arm64/amlogic/meson-g12b-gsking-x.dts +++ b/dts/src/arm64/amlogic/meson-g12b-gsking-x.dts @@ -20,10 +20,16 @@ rtc1 = &vrtc; }; + gpio_fan: gpio-fan { + compatible = "gpio-fan"; + gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>; + /* Using Dummy Speed */ + gpio-fan,speed-map = <0 0>, <1 1>; + #cooling-cells = <2>; + }; + gpio-keys-polled { compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <100>; power-button { @@ -96,6 +102,23 @@ status = "okay"; }; +&cpu_thermal { + trips { + cpu_active: cpu-active { + temperature = <70000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "active"; + }; + }; + + cooling-maps { + map { + trip = <&cpu_active>; + cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; +}; + &frddr_a { status = "okay"; }; diff --git a/dts/src/arm64/amlogic/meson-g12b-gtking-pro.dts b/dts/src/arm64/amlogic/meson-g12b-gtking-pro.dts index 707daf9278..afe375fa83 100644 --- a/dts/src/arm64/amlogic/meson-g12b-gtking-pro.dts +++ b/dts/src/arm64/amlogic/meson-g12b-gtking-pro.dts @@ -21,8 +21,6 @@ gpio-keys-polled { compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <100>; power-button { diff --git a/dts/src/arm64/amlogic/meson-gx.dtsi b/dts/src/arm64/amlogic/meson-gx.dtsi index aa14ea017a..023a520054 100644 --- a/dts/src/arm64/amlogic/meson-gx.dtsi +++ b/dts/src/arm64/amlogic/meson-gx.dtsi @@ -450,7 +450,7 @@ sysctrl_AO: sys-ctrl@0 { compatible = "amlogic,meson-gx-ao-sysctrl", "simple-mfd", "syscon"; - reg = <0x0 0x0 0x0 0x100>; + reg = <0x0 0x0 0x0 0x100>; clkc_AO: clock-controller { compatible = "amlogic,meson-gx-aoclkc"; diff --git a/dts/src/arm64/amlogic/meson-gxbb-kii-pro.dts b/dts/src/arm64/amlogic/meson-gxbb-kii-pro.dts index e8394a8269..6d8cc00fed 100644 --- a/dts/src/arm64/amlogic/meson-gxbb-kii-pro.dts +++ b/dts/src/arm64/amlogic/meson-gxbb-kii-pro.dts @@ -26,8 +26,6 @@ gpio-keys-polled { compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <20>; button-reset { diff --git a/dts/src/arm64/amlogic/meson-gxbb-nexbox-a95x.dts b/dts/src/arm64/amlogic/meson-gxbb-nexbox-a95x.dts index f887bfb445..63137ce3cb 100644 --- a/dts/src/arm64/amlogic/meson-gxbb-nexbox-a95x.dts +++ b/dts/src/arm64/amlogic/meson-gxbb-nexbox-a95x.dts @@ -42,11 +42,9 @@ gpio-keys-polled { compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <100>; - button@0 { + button { label = "reset"; linux,code = <KEY_RESTART>; gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm64/amlogic/meson-gxbb-wetek-play2.dts b/dts/src/arm64/amlogic/meson-gxbb-wetek-play2.dts index 6eae692792..505ffcd8eb 100644 --- a/dts/src/arm64/amlogic/meson-gxbb-wetek-play2.dts +++ b/dts/src/arm64/amlogic/meson-gxbb-wetek-play2.dts @@ -37,11 +37,9 @@ gpio-keys-polled { compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <100>; - button@0 { + button { label = "reset"; linux,code = <KEY_RESTART>; gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm64/amlogic/meson-gxl-s905d-mecool-kii-pro.dts b/dts/src/arm64/amlogic/meson-gxl-s905d-mecool-kii-pro.dts index c529b6c860..a4fa186f04 100644 --- a/dts/src/arm64/amlogic/meson-gxl-s905d-mecool-kii-pro.dts +++ b/dts/src/arm64/amlogic/meson-gxl-s905d-mecool-kii-pro.dts @@ -30,11 +30,9 @@ gpio-keys-polled { compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <100>; - button@0 { + button { label = "power"; linux,code = <KEY_POWER>; gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm64/amlogic/meson-gxl-s905d-p230.dts b/dts/src/arm64/amlogic/meson-gxl-s905d-p230.dts index b2ab05c220..c1470416fa 100644 --- a/dts/src/arm64/amlogic/meson-gxl-s905d-p230.dts +++ b/dts/src/arm64/amlogic/meson-gxl-s905d-p230.dts @@ -30,11 +30,9 @@ gpio-keys-polled { compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <100>; - button@0 { + button { label = "power"; linux,code = <KEY_POWER>; gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm64/amlogic/meson-gxl-s905d-vero4k-plus.dts b/dts/src/arm64/amlogic/meson-gxl-s905d-vero4k-plus.dts index 4b0ff707e2..595b490850 100644 --- a/dts/src/arm64/amlogic/meson-gxl-s905d-vero4k-plus.dts +++ b/dts/src/arm64/amlogic/meson-gxl-s905d-vero4k-plus.dts @@ -16,11 +16,9 @@ gpio-keys-polled { compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <20>; - button@0 { + button { label = "power"; linux,code = <KEY_POWER>; gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>; diff --git a/dts/src/arm64/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts b/dts/src/arm64/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts index fcb304c5a4..6831137c5c 100644 --- a/dts/src/arm64/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts +++ b/dts/src/arm64/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts @@ -216,7 +216,7 @@ bluetooth { compatible = "realtek,rtl8822cs-bt"; - enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; host-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>; }; }; diff --git a/dts/src/arm64/amlogic/meson-gxm-mecool-kiii-pro.dts b/dts/src/arm64/amlogic/meson-gxm-mecool-kiii-pro.dts index ebebf344b7..f5b3424c0f 100644 --- a/dts/src/arm64/amlogic/meson-gxm-mecool-kiii-pro.dts +++ b/dts/src/arm64/amlogic/meson-gxm-mecool-kiii-pro.dts @@ -35,11 +35,9 @@ gpio-keys-polled { compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <100>; - button@0 { + button { label = "power"; linux,code = <KEY_POWER>; gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm64/amlogic/meson-gxm-minix-neo-u9h.dts b/dts/src/arm64/amlogic/meson-gxm-minix-neo-u9h.dts index ea9f234d1f..b8ef3bd8b8 100644 --- a/dts/src/arm64/amlogic/meson-gxm-minix-neo-u9h.dts +++ b/dts/src/arm64/amlogic/meson-gxm-minix-neo-u9h.dts @@ -41,11 +41,9 @@ gpio-keys-polled { compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <100>; - button@0 { + button { label = "power"; linux,code = <KEY_POWER>; gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm64/amlogic/meson-gxm-q200.dts b/dts/src/arm64/amlogic/meson-gxm-q200.dts index 8edbfe0408..d4858afa0e 100644 --- a/dts/src/arm64/amlogic/meson-gxm-q200.dts +++ b/dts/src/arm64/amlogic/meson-gxm-q200.dts @@ -30,11 +30,9 @@ gpio-keys-polled { compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <100>; - button@0 { + button { label = "power"; linux,code = <KEY_POWER>; gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm64/amlogic/meson-gxm-wetek-core2.dts b/dts/src/arm64/amlogic/meson-gxm-wetek-core2.dts index 1e7f77f9b5..f8c40340b9 100644 --- a/dts/src/arm64/amlogic/meson-gxm-wetek-core2.dts +++ b/dts/src/arm64/amlogic/meson-gxm-wetek-core2.dts @@ -45,8 +45,6 @@ gpio-keys-polled { compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <100>; button-power { diff --git a/dts/src/arm64/amlogic/meson-s4.dtsi b/dts/src/arm64/amlogic/meson-s4.dtsi index ff213618a5..ad50cba42d 100644 --- a/dts/src/arm64/amlogic/meson-s4.dtsi +++ b/dts/src/arm64/amlogic/meson-s4.dtsi @@ -127,6 +127,12 @@ clocks = <&xtal>, <&xtal>, <&xtal>; clock-names = "xtal", "pclk", "baud"; }; + + reset: reset-controller@2000 { + compatible = "amlogic,meson-s4-reset"; + reg = <0x0 0x2000 0x0 0x98>; + #reset-cells = <1>; + }; }; }; }; diff --git a/dts/src/arm64/amlogic/meson-sm1-sei610.dts b/dts/src/arm64/amlogic/meson-sm1-sei610.dts index a5d79f2f7c..603337ca56 100644 --- a/dts/src/arm64/amlogic/meson-sm1-sei610.dts +++ b/dts/src/arm64/amlogic/meson-sm1-sei610.dts @@ -48,7 +48,7 @@ gpio-keys { compatible = "gpio-keys"; - key1 { + key-1 { label = "A"; linux,code = <BTN_0>; gpios = <&gpio GPIOH_6 GPIO_ACTIVE_LOW>; @@ -56,7 +56,7 @@ interrupts = <34 IRQ_TYPE_EDGE_BOTH>; }; - key2 { + key-2 { label = "B"; linux,code = <BTN_1>; gpios = <&gpio GPIOH_7 GPIO_ACTIVE_LOW>; @@ -64,7 +64,7 @@ interrupts = <35 IRQ_TYPE_EDGE_BOTH>; }; - key3 { + key-3 { label = "C"; linux,code = <BTN_2>; gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; @@ -72,7 +72,7 @@ interrupts = <2 IRQ_TYPE_EDGE_BOTH>; }; - mic_mute { + key-mic-mute { label = "MicMute"; linux,code = <SW_MUTE_DEVICE>; linux,input-type = <EV_SW>; @@ -81,7 +81,7 @@ interrupts = <99 IRQ_TYPE_EDGE_BOTH>; }; - power_key { + key-power { label = "PowerKey"; linux,code = <KEY_POWER>; gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm64/apm/apm-merlin.dts b/dts/src/arm64/apm/apm-merlin.dts index 217d7728b6..049e7a5edc 100644 --- a/dts/src/arm64/apm/apm-merlin.dts +++ b/dts/src/arm64/apm/apm-merlin.dts @@ -22,7 +22,7 @@ gpio-keys { compatible = "gpio-keys"; - button@1 { + button { label = "POWER"; linux,code = <116>; linux,input-type = <0x1>; diff --git a/dts/src/arm64/apm/apm-mustang.dts b/dts/src/arm64/apm/apm-mustang.dts index e927811ade..efac50aeca 100644 --- a/dts/src/arm64/apm/apm-mustang.dts +++ b/dts/src/arm64/apm/apm-mustang.dts @@ -22,7 +22,7 @@ gpio-keys { compatible = "gpio-keys"; - button@1 { + button { label = "POWER"; linux,code = <116>; linux,input-type = <0x1>; diff --git a/dts/src/arm64/apm/apm-shadowcat.dtsi b/dts/src/arm64/apm/apm-shadowcat.dtsi index a83c82c50e..a8526f8157 100644 --- a/dts/src/arm64/apm/apm-shadowcat.dtsi +++ b/dts/src/arm64/apm/apm-shadowcat.dtsi @@ -597,11 +597,11 @@ interrupts = <0x0 0x4c 0x4>; }; - /* Do not change dwusb name, coded for backward compatibility */ - usb0: dwusb@19000000 { + /* Node-name might need to be coded as dwusb for backward compatibility */ + usb0: usb@19000000 { status = "disabled"; compatible = "snps,dwc3"; - reg = <0x0 0x19000000 0x0 0x100000>; + reg = <0x0 0x19000000 0x0 0x100000>; interrupts = <0x0 0x5d 0x4>; dma-coherent; dr_mode = "host"; diff --git a/dts/src/arm64/apm/apm-storm.dtsi b/dts/src/arm64/apm/apm-storm.dtsi index 0f37e77f54..f56d687f77 100644 --- a/dts/src/arm64/apm/apm-storm.dtsi +++ b/dts/src/arm64/apm/apm-storm.dtsi @@ -923,20 +923,20 @@ phy-names = "sata-phy"; }; - /* Do not change dwusb name, coded for backward compatibility */ - usb0: dwusb@19000000 { + /* Node-name might need to be coded as dwusb for backward compatibility */ + usb0: usb@19000000 { status = "disabled"; compatible = "snps,dwc3"; - reg = <0x0 0x19000000 0x0 0x100000>; + reg = <0x0 0x19000000 0x0 0x100000>; interrupts = <0x0 0x89 0x4>; dma-coherent; dr_mode = "host"; }; - usb1: dwusb@19800000 { + usb1: usb@19800000 { status = "disabled"; compatible = "snps,dwc3"; - reg = <0x0 0x19800000 0x0 0x100000>; + reg = <0x0 0x19800000 0x0 0x100000>; interrupts = <0x0 0x8a 0x4>; dma-coherent; dr_mode = "host"; diff --git a/dts/src/arm64/apple/t8103-pmgr.dtsi b/dts/src/arm64/apple/t8103-pmgr.dtsi index fc51bc8724..a6dbb1f485 100644 --- a/dts/src/arm64/apple/t8103-pmgr.dtsi +++ b/dts/src/arm64/apple/t8103-pmgr.dtsi @@ -725,11 +725,6 @@ #power-domain-cells = <0>; #reset-cells = <0>; label = "ans2"; - /* - * The ADT makes ps_apcie_st depend on ps_ans2 instead, but this - * doesn't make much sense since ANS2 uses APCIE_ST. - */ - power-domains = <&ps_apcie_st>; }; ps_gfx: power-controller@3f8 { @@ -836,7 +831,7 @@ #power-domain-cells = <0>; #reset-cells = <0>; label = "apcie_st"; - power-domains = <&ps_apcie>; + power-domains = <&ps_apcie>, <&ps_ans2>; }; ps_ane_sys: power-controller@470 { diff --git a/dts/src/arm64/apple/t8103.dtsi b/dts/src/arm64/apple/t8103.dtsi index 9f8f4145db..51a63b29d4 100644 --- a/dts/src/arm64/apple/t8103.dtsi +++ b/dts/src/arm64/apple/t8103.dtsi @@ -378,6 +378,40 @@ <AIC_IRQ 274 IRQ_TYPE_LEVEL_HIGH>; }; + ans_mbox: mbox@277408000 { + compatible = "apple,t8103-asc-mailbox", "apple,asc-mailbox-v4"; + reg = <0x2 0x77408000 0x0 0x4000>; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 583 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 584 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 585 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 586 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "send-empty", "send-not-empty", + "recv-empty", "recv-not-empty"; + #mbox-cells = <0>; + power-domains = <&ps_ans2>; + }; + + sart: iommu@27bc50000 { + compatible = "apple,t8103-sart"; + reg = <0x2 0x7bc50000 0x0 0x10000>; + power-domains = <&ps_ans2>; + }; + + nvme@27bcc0000 { + compatible = "apple,t8103-nvme-ans2", "apple,nvme-ans2"; + reg = <0x2 0x7bcc0000 0x0 0x40000>, + <0x2 0x77400000 0x0 0x4000>; + reg-names = "nvme", "ans"; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 590 IRQ_TYPE_LEVEL_HIGH>; + mboxes = <&ans_mbox>; + apple,sart = <&sart>; + power-domains = <&ps_ans2>, <&ps_apcie_st>; + power-domain-names = "ans", "apcie0"; + resets = <&ps_ans2>; + }; + pcie0_dart_0: dart@681008000 { compatible = "apple,t8103-dart"; reg = <0x6 0x81008000 0x0 0x4000>; diff --git a/dts/src/arm64/arm/fvp-base-revc.dts b/dts/src/arm64/arm/fvp-base-revc.dts index a496e39e62..5f6f30c801 100644 --- a/dts/src/arm64/arm/fvp-base-revc.dts +++ b/dts/src/arm64/arm/fvp-base-revc.dts @@ -186,7 +186,7 @@ }; panel { - compatible = "arm,rtsm-display", "panel-dpi"; + compatible = "arm,rtsm-display"; port { panel_in: endpoint { remote-endpoint = <&clcd_pads>; diff --git a/dts/src/arm64/arm/juno-base.dtsi b/dts/src/arm64/arm/juno-base.dtsi index 065381c1cb..8d0d45d168 100644 --- a/dts/src/arm64/arm/juno-base.dtsi +++ b/dts/src/arm64/arm/juno-base.dtsi @@ -581,36 +581,36 @@ trig-conns@0 { reg = <0>; - arm,trig-in-sigs=<2 3>; - arm,trig-in-types=<SNK_FULL SNK_ACQCOMP>; - arm,trig-out-sigs=<0 1>; - arm,trig-out-types=<SNK_FLUSHIN SNK_TRIGIN>; + arm,trig-in-sigs = <2 3>; + arm,trig-in-types = <SNK_FULL SNK_ACQCOMP>; + arm,trig-out-sigs = <0 1>; + arm,trig-out-types = <SNK_FLUSHIN SNK_TRIGIN>; arm,cs-dev-assoc = <&etr_sys>; }; trig-conns@1 { reg = <1>; - arm,trig-in-sigs=<0 1>; - arm,trig-in-types=<SNK_FULL SNK_ACQCOMP>; - arm,trig-out-sigs=<7 6>; - arm,trig-out-types=<SNK_FLUSHIN SNK_TRIGIN>; + arm,trig-in-sigs = <0 1>; + arm,trig-in-types = <SNK_FULL SNK_ACQCOMP>; + arm,trig-out-sigs = <7 6>; + arm,trig-out-types = <SNK_FLUSHIN SNK_TRIGIN>; arm,cs-dev-assoc = <&etf_sys0>; }; trig-conns@2 { reg = <2>; - arm,trig-in-sigs=<4 5 6 7>; - arm,trig-in-types=<STM_TOUT_SPTE STM_TOUT_SW + arm,trig-in-sigs = <4 5 6 7>; + arm,trig-in-types = <STM_TOUT_SPTE STM_TOUT_SW STM_TOUT_HETE STM_ASYNCOUT>; - arm,trig-out-sigs=<4 5>; - arm,trig-out-types=<STM_HWEVENT STM_HWEVENT>; + arm,trig-out-sigs = <4 5>; + arm,trig-out-types = <STM_HWEVENT STM_HWEVENT>; arm,cs-dev-assoc = <&stm_sys>; }; trig-conns@3 { reg = <3>; - arm,trig-out-sigs=<2 3>; - arm,trig-out-types=<SNK_FLUSHIN SNK_TRIGIN>; + arm,trig-out-sigs = <2 3>; + arm,trig-out-types = <SNK_FLUSHIN SNK_TRIGIN>; arm,cs-dev-assoc = <&tpiu_sys>; }; }; @@ -628,24 +628,24 @@ trig-conns@0 { reg = <0>; - arm,trig-in-sigs=<0>; - arm,trig-in-types=<GEN_INTREQ>; - arm,trig-out-sigs=<0>; - arm,trig-out-types=<GEN_HALTREQ>; + arm,trig-in-sigs = <0>; + arm,trig-in-types = <GEN_INTREQ>; + arm,trig-out-sigs = <0>; + arm,trig-out-types = <GEN_HALTREQ>; arm,trig-conn-name = "sys_profiler"; }; trig-conns@1 { reg = <1>; - arm,trig-out-sigs=<2 3>; - arm,trig-out-types=<GEN_HALTREQ GEN_RESTARTREQ>; + arm,trig-out-sigs = <2 3>; + arm,trig-out-types = <GEN_HALTREQ GEN_RESTARTREQ>; arm,trig-conn-name = "watchdog"; }; trig-conns@2 { reg = <2>; - arm,trig-out-sigs=<1 6>; - arm,trig-out-types=<GEN_HALTREQ GEN_RESTARTREQ>; + arm,trig-out-sigs = <1 6>; + arm,trig-out-types = <GEN_HALTREQ GEN_RESTARTREQ>; arm,trig-conn-name = "g_counter"; }; }; diff --git a/dts/src/arm64/arm/juno-cs-r1r2.dtsi b/dts/src/arm64/arm/juno-cs-r1r2.dtsi index 2e43f45313..ba88d1596f 100644 --- a/dts/src/arm64/arm/juno-cs-r1r2.dtsi +++ b/dts/src/arm64/arm/juno-cs-r1r2.dtsi @@ -96,24 +96,24 @@ trig-conns@0 { reg = <0>; - arm,trig-in-sigs=<0 1>; - arm,trig-in-types=<SNK_FULL SNK_ACQCOMP>; - arm,trig-out-sigs=<0 1>; - arm,trig-out-types=<SNK_FLUSHIN SNK_TRIGIN>; + arm,trig-in-sigs = <0 1>; + arm,trig-in-types = <SNK_FULL SNK_ACQCOMP>; + arm,trig-out-sigs = <0 1>; + arm,trig-out-types = <SNK_FLUSHIN SNK_TRIGIN>; arm,cs-dev-assoc = <&etf_sys1>; }; trig-conns@1 { reg = <1>; - arm,trig-in-sigs=<2 3 4>; - arm,trig-in-types=<ELA_DBGREQ ELA_TSTART ELA_TSTOP>; + arm,trig-in-sigs = <2 3 4>; + arm,trig-in-types = <ELA_DBGREQ ELA_TSTART ELA_TSTOP>; arm,trig-conn-name = "ela_clus_0"; }; trig-conns@2 { reg = <2>; - arm,trig-in-sigs=<5 6 7>; - arm,trig-in-types=<ELA_DBGREQ ELA_TSTART ELA_TSTOP>; + arm,trig-in-sigs = <5 6 7>; + arm,trig-in-types = <ELA_DBGREQ ELA_TSTART ELA_TSTOP>; arm,trig-conn-name = "ela_clus_1"; }; }; diff --git a/dts/src/arm64/arm/juno-r1.dts b/dts/src/arm64/arm/juno-r1.dts index f099fb611d..6451c62146 100644 --- a/dts/src/arm64/arm/juno-r1.dts +++ b/dts/src/arm64/arm/juno-r1.dts @@ -192,6 +192,7 @@ cache-size = <0x200000>; cache-line-size = <64>; cache-sets = <2048>; + cache-level = <2>; }; A53_L2: l2-cache1 { @@ -199,6 +200,7 @@ cache-size = <0x100000>; cache-line-size = <64>; cache-sets = <1024>; + cache-level = <2>; }; }; diff --git a/dts/src/arm64/arm/juno-r2.dts b/dts/src/arm64/arm/juno-r2.dts index 709389582a..438cd1ff4b 100644 --- a/dts/src/arm64/arm/juno-r2.dts +++ b/dts/src/arm64/arm/juno-r2.dts @@ -198,6 +198,7 @@ cache-size = <0x200000>; cache-line-size = <64>; cache-sets = <2048>; + cache-level = <2>; }; A53_L2: l2-cache1 { @@ -205,6 +206,7 @@ cache-size = <0x100000>; cache-line-size = <64>; cache-sets = <1024>; + cache-level = <2>; }; }; diff --git a/dts/src/arm64/arm/juno-scmi.dtsi b/dts/src/arm64/arm/juno-scmi.dtsi index 4135d62e44..ec85cd2c73 100644 --- a/dts/src/arm64/arm/juno-scmi.dtsi +++ b/dts/src/arm64/arm/juno-scmi.dtsi @@ -187,7 +187,6 @@ &mailbox { compatible = "arm,mhu-doorbell", "arm,primecell"; #mbox-cells = <2>; - mbox-name = "ARM-MHU"; }; &smmu_etr { diff --git a/dts/src/arm64/arm/juno.dts b/dts/src/arm64/arm/juno.dts index dbc22e70b6..cf4a582113 100644 --- a/dts/src/arm64/arm/juno.dts +++ b/dts/src/arm64/arm/juno.dts @@ -197,6 +197,7 @@ cache-size = <0x200000>; cache-line-size = <64>; cache-sets = <2048>; + cache-level = <2>; }; A53_L2: l2-cache1 { @@ -204,6 +205,7 @@ cache-size = <0x100000>; cache-line-size = <64>; cache-sets = <1024>; + cache-level = <2>; }; }; diff --git a/dts/src/arm64/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts b/dts/src/arm64/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts index b63eefab48..064f7f5496 100644 --- a/dts/src/arm64/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts +++ b/dts/src/arm64/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts @@ -83,25 +83,25 @@ compatible = "gpio-keys-polled"; poll-interval = <100>; - brightness { + key-brightness { label = "LEDs"; linux,code = <KEY_BRIGHTNESS_ZERO>; gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; }; - wps { + key-wps { label = "WPS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; }; - wifi { + key-wifi { label = "WiFi"; linux,code = <KEY_RFKILL>; gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; }; - restart { + key-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm64/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts b/dts/src/arm64/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts index 169fbb7cfd..04f8524b53 100644 --- a/dts/src/arm64/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts +++ b/dts/src/arm64/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts @@ -18,25 +18,25 @@ compatible = "gpio-keys-polled"; poll-interval = <100>; - wifi { + key-wifi { label = "WiFi"; linux,code = <KEY_RFKILL>; gpios = <&gpio0 28 GPIO_ACTIVE_LOW>; }; - wps { + key-wps { label = "WPS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; }; - restart { + key-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&gpio0 30 GPIO_ACTIVE_LOW>; }; - brightness { + key-brightness { label = "LEDs"; linux,code = <KEY_BRIGHTNESS_ZERO>; gpios = <&gpio0 31 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm64/broadcom/bcmbca/bcm4912-asus-gt-ax6000.dts b/dts/src/arm64/broadcom/bcmbca/bcm4912-asus-gt-ax6000.dts new file mode 100644 index 0000000000..ed554666e9 --- /dev/null +++ b/dts/src/arm64/broadcom/bcmbca/bcm4912-asus-gt-ax6000.dts @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +/dts-v1/; + +#include "bcm4912.dtsi" + +/ { + compatible = "asus,gt-ax6000", "brcm,bcm4912", "brcm,bcmbca"; + model = "Asus GT-AX6000"; + + memory@0 { + device_type = "memory"; + reg = <0x00 0x00 0x00 0x40000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/dts/src/arm64/broadcom/bcmbca/bcm4912.dtsi b/dts/src/arm64/broadcom/bcmbca/bcm4912.dtsi new file mode 100644 index 0000000000..3d016c2ce6 --- /dev/null +++ b/dts/src/arm64/broadcom/bcmbca/bcm4912.dtsi @@ -0,0 +1,128 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "brcm,bcm4912", "brcm,bcmbca"; + #address-cells = <2>; + #size-cells = <2>; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + B53_0: cpu@0 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + B53_1: cpu@1 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x1>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + B53_2: cpu@2 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x2>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + B53_3: cpu@3 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x3>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + pmu: pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&B53_0>, <&B53_1>, + <&B53_2>, <&B53_3>; + }; + + clocks: clocks { + periph_clk: periph-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + uart_clk: uart-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&periph_clk>; + clock-div = <4>; + clock-mult = <1>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + axi@81000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x81000000 0x8000>; + + gic: interrupt-controller@1000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + reg = <0x1000 0x1000>, + <0x2000 0x2000>, + <0x4000 0x2000>, + <0x6000 0x2000>; + }; + }; + + bus@ff800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0xff800000 0x800000>; + + uart0: serial@12000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x12000 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart_clk>, <&uart_clk>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + }; +}; diff --git a/dts/src/arm64/broadcom/bcmbca/bcm63146.dtsi b/dts/src/arm64/broadcom/bcmbca/bcm63146.dtsi new file mode 100644 index 0000000000..04de96bd0a --- /dev/null +++ b/dts/src/arm64/broadcom/bcmbca/bcm63146.dtsi @@ -0,0 +1,110 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "brcm,bcm63146", "brcm,bcmbca"; + #address-cells = <2>; + #size-cells = <2>; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + B53_0: cpu@0 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + B53_1: cpu@1 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x1>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + }; + + pmu: pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&B53_0>, <&B53_1>; + }; + + clocks: clocks { + periph_clk: periph-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + uart_clk: uart-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&periph_clk>; + clock-div = <4>; + clock-mult = <1>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + axi@81000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x81000000 0x8000>; + + gic: interrupt-controller@1000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x1000 0x1000>, + <0x2000 0x2000>, + <0x4000 0x2000>, + <0x6000 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + }; + + bus@ff800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0xff800000 0x800000>; + + uart0: serial@12000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x12000 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart_clk>, <&uart_clk>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + }; +}; diff --git a/dts/src/arm64/broadcom/bcmbca/bcm63158.dtsi b/dts/src/arm64/broadcom/bcmbca/bcm63158.dtsi new file mode 100644 index 0000000000..13629702f7 --- /dev/null +++ b/dts/src/arm64/broadcom/bcmbca/bcm63158.dtsi @@ -0,0 +1,128 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "brcm,bcm63158", "brcm,bcmbca"; + #address-cells = <2>; + #size-cells = <2>; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + B53_0: cpu@0 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + B53_1: cpu@1 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x1>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + B53_2: cpu@2 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x2>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + B53_3: cpu@3 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x3>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + pmu: pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&B53_0>, <&B53_1>, + <&B53_2>, <&B53_3>; + }; + + clocks: clocks { + periph_clk: periph-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + uart_clk: uart-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&periph_clk>; + clock-div = <4>; + clock-mult = <1>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + axi@81000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x81000000 0x8000>; + + gic: interrupt-controller@1000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + reg = <0x1000 0x1000>, + <0x2000 0x2000>, + <0x4000 0x2000>, + <0x6000 0x2000>; + }; + }; + + bus@ff800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0xff800000 0x800000>; + + uart0: serial@12000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x12000 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart_clk>, <&uart_clk>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + }; +}; diff --git a/dts/src/arm64/broadcom/bcmbca/bcm6813.dtsi b/dts/src/arm64/broadcom/bcmbca/bcm6813.dtsi new file mode 100644 index 0000000000..c3e6197be8 --- /dev/null +++ b/dts/src/arm64/broadcom/bcmbca/bcm6813.dtsi @@ -0,0 +1,128 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "brcm,bcm6813", "brcm,bcmbca"; + #address-cells = <2>; + #size-cells = <2>; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + B53_0: cpu@0 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + B53_1: cpu@1 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x1>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + B53_2: cpu@2 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x2>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + B53_3: cpu@3 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x3>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + pmu: pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&B53_0>, <&B53_1>, + <&B53_2>, <&B53_3>; + }; + + clocks: clocks { + periph_clk: periph-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + uart_clk: uart-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&periph_clk>; + clock-div = <4>; + clock-mult = <1>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + axi@81000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x81000000 0x8000>; + + gic: interrupt-controller@1000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + reg = <0x1000 0x1000>, + <0x2000 0x2000>, + <0x4000 0x2000>, + <0x6000 0x2000>; + }; + }; + + bus@ff800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0xff800000 0x800000>; + + uart0: serial@12000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x12000 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart_clk>, <&uart_clk>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + }; +}; diff --git a/dts/src/arm64/broadcom/bcmbca/bcm6856.dtsi b/dts/src/arm64/broadcom/bcmbca/bcm6856.dtsi new file mode 100644 index 0000000000..0bce649721 --- /dev/null +++ b/dts/src/arm64/broadcom/bcmbca/bcm6856.dtsi @@ -0,0 +1,103 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "brcm,bcm6856", "brcm,bcmbca"; + #address-cells = <2>; + #size-cells = <2>; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + B53_0: cpu@0 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + B53_1: cpu@1 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x1>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + }; + + pmu: pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&B53_0>, <&B53_1>; + }; + + clocks: clocks { + periph_clk:periph-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + axi@81000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x81000000 0x8000>; + + gic: interrupt-controller@1000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x1000 0x1000>, /* GICD */ + <0x2000 0x2000>, /* GICC */ + <0x4000 0x2000>, /* GICH */ + <0x6000 0x2000>; /* GICV */ + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + }; + + bus@ff800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0xff800000 0x800000>; + + uart0: serial@640 { + compatible = "brcm,bcm6345-uart"; + reg = <0x640 0x18>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&periph_clk>; + clock-names = "refclk"; + status = "disabled"; + }; + }; +}; diff --git a/dts/src/arm64/broadcom/bcmbca/bcm6858.dtsi b/dts/src/arm64/broadcom/bcmbca/bcm6858.dtsi new file mode 100644 index 0000000000..29a880c6c8 --- /dev/null +++ b/dts/src/arm64/broadcom/bcmbca/bcm6858.dtsi @@ -0,0 +1,121 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "brcm,bcm6858", "brcm,bcmbca"; + #address-cells = <2>; + #size-cells = <2>; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + B53_0: cpu@0 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + B53_1: cpu@1 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x1>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + B53_2: cpu@2 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x2>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + B53_3: cpu@3 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x3>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + L2_0: l2-cache0 { + compatible = "cache"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + pmu: pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&B53_0>, <&B53_1>, + <&B53_2>, <&B53_3>; + }; + + clocks: clocks { + periph_clk:periph-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + axi@81000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x81000000 0x8000>; + + gic: interrupt-controller@1000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x1000 0x1000>, /* GICD */ + <0x2000 0x2000>, /* GICC */ + <0x4000 0x2000>, /* GICH */ + <0x6000 0x2000>; /* GICV */ + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + }; + + bus@ff800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0xff800000 0x62000>; + + uart0: serial@640 { + compatible = "brcm,bcm6345-uart"; + reg = <0x640 0x18>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&periph_clk>; + clock-names = "refclk"; + status = "disabled"; + }; + }; +}; diff --git a/dts/src/arm64/broadcom/bcmbca/bcm94912.dts b/dts/src/arm64/broadcom/bcmbca/bcm94912.dts new file mode 100644 index 0000000000..a3623e6f69 --- /dev/null +++ b/dts/src/arm64/broadcom/bcmbca/bcm94912.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm4912.dtsi" + +/ { + model = "Broadcom BCM94912 Reference Board"; + compatible = "brcm,bcm94912", "brcm,bcm4912", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/dts/src/arm64/broadcom/bcmbca/bcm963146.dts b/dts/src/arm64/broadcom/bcmbca/bcm963146.dts new file mode 100644 index 0000000000..e39f1e6d47 --- /dev/null +++ b/dts/src/arm64/broadcom/bcmbca/bcm963146.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm63146.dtsi" + +/ { + model = "Broadcom BCM963146 Reference Board"; + compatible = "brcm,bcm963146", "brcm,bcm63146", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/dts/src/arm64/broadcom/bcmbca/bcm963158.dts b/dts/src/arm64/broadcom/bcmbca/bcm963158.dts new file mode 100644 index 0000000000..eba07e0b1c --- /dev/null +++ b/dts/src/arm64/broadcom/bcmbca/bcm963158.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm63158.dtsi" + +/ { + model = "Broadcom BCM963158 Reference Board"; + compatible = "brcm,bcm963158", "brcm,bcm63158", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/dts/src/arm64/broadcom/bcmbca/bcm96813.dts b/dts/src/arm64/broadcom/bcmbca/bcm96813.dts new file mode 100644 index 0000000000..af17091ae7 --- /dev/null +++ b/dts/src/arm64/broadcom/bcmbca/bcm96813.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm6813.dtsi" + +/ { + model = "Broadcom BCM96813 Reference Board"; + compatible = "brcm,bcm96813", "brcm,bcm6813", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/dts/src/arm64/broadcom/bcmbca/bcm96856.dts b/dts/src/arm64/broadcom/bcmbca/bcm96856.dts new file mode 100644 index 0000000000..032aeb75c9 --- /dev/null +++ b/dts/src/arm64/broadcom/bcmbca/bcm96856.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm6856.dtsi" + +/ { + model = "Broadcom BCM96856 Reference Board"; + compatible = "brcm,bcm96856", "brcm,bcm6856", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/dts/src/arm64/broadcom/bcmbca/bcm96858.dts b/dts/src/arm64/broadcom/bcmbca/bcm96858.dts new file mode 100644 index 0000000000..0cbf582f5d --- /dev/null +++ b/dts/src/arm64/broadcom/bcmbca/bcm96858.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm6858.dtsi" + +/ { + model = "Broadcom BCM96858 Reference Board"; + compatible = "brcm,bcm96858", "brcm,bcm6858", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/dts/src/arm64/broadcom/stingray/stingray.dtsi b/dts/src/arm64/broadcom/stingray/stingray.dtsi index 09d4aa8ae1..8f8c25e511 100644 --- a/dts/src/arm64/broadcom/stingray/stingray.dtsi +++ b/dts/src/arm64/broadcom/stingray/stingray.dtsi @@ -567,7 +567,7 @@ reg-names = "amac_base"; dma-coherent; interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>; - status= "disabled"; + status = "disabled"; }; nand: nand@360000 { diff --git a/dts/src/arm64/exynos/exynos-pinctrl.h b/dts/src/arm64/exynos/exynos-pinctrl.h new file mode 100644 index 0000000000..7dd94a9b36 --- /dev/null +++ b/dts/src/arm64/exynos/exynos-pinctrl.h @@ -0,0 +1,79 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Samsung Exynos DTS pinctrl constants + * + * Copyright (c) 2016 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Copyright (c) 2022 Linaro Ltd + * Author: Krzysztof Kozlowski <krzk@kernel.org> + */ + +#ifndef __DTS_ARM64_SAMSUNG_EXYNOS_PINCTRL_H__ +#define __DTS_ARM64_SAMSUNG_EXYNOS_PINCTRL_H__ + +#define EXYNOS_PIN_PULL_NONE 0 +#define EXYNOS_PIN_PULL_DOWN 1 +#define EXYNOS_PIN_PULL_UP 3 + +/* Pin function in power down mode */ +#define EXYNOS_PIN_PDN_OUT0 0 +#define EXYNOS_PIN_PDN_OUT1 1 +#define EXYNOS_PIN_PDN_INPUT 2 +#define EXYNOS_PIN_PDN_PREV 3 + +/* + * Drive strengths for Exynos5410, Exynos542x, Exynos5800, Exynos7885, Exynos850 + * (except GPIO_HSI block), ExynosAutov9 (FSI0, PERIC1) + */ +#define EXYNOS5420_PIN_DRV_LV1 0 +#define EXYNOS5420_PIN_DRV_LV2 1 +#define EXYNOS5420_PIN_DRV_LV3 2 +#define EXYNOS5420_PIN_DRV_LV4 3 + +/* Drive strengths for Exynos5433 */ +#define EXYNOS5433_PIN_DRV_FAST_SR1 0 +#define EXYNOS5433_PIN_DRV_FAST_SR2 1 +#define EXYNOS5433_PIN_DRV_FAST_SR3 2 +#define EXYNOS5433_PIN_DRV_FAST_SR4 3 +#define EXYNOS5433_PIN_DRV_FAST_SR5 4 +#define EXYNOS5433_PIN_DRV_FAST_SR6 5 +#define EXYNOS5433_PIN_DRV_SLOW_SR1 8 +#define EXYNOS5433_PIN_DRV_SLOW_SR2 9 +#define EXYNOS5433_PIN_DRV_SLOW_SR3 0xa +#define EXYNOS5433_PIN_DRV_SLOW_SR4 0xb +#define EXYNOS5433_PIN_DRV_SLOW_SR5 0xc +#define EXYNOS5433_PIN_DRV_SLOW_SR6 0xf + +/* Drive strengths for Exynos7 (except FSYS1) */ +#define EXYNOS7_PIN_DRV_LV1 0 +#define EXYNOS7_PIN_DRV_LV2 2 +#define EXYNOS7_PIN_DRV_LV3 1 +#define EXYNOS7_PIN_DRV_LV4 3 + +/* Drive strengths for Exynos7 FSYS1 block */ +#define EXYNOS7_FSYS1_PIN_DRV_LV1 0 +#define EXYNOS7_FSYS1_PIN_DRV_LV2 4 +#define EXYNOS7_FSYS1_PIN_DRV_LV3 2 +#define EXYNOS7_FSYS1_PIN_DRV_LV4 6 +#define EXYNOS7_FSYS1_PIN_DRV_LV5 1 +#define EXYNOS7_FSYS1_PIN_DRV_LV6 5 + +/* Drive strengths for Exynos850 GPIO_HSI block */ +#define EXYNOS850_HSI_PIN_DRV_LV1 0 /* 1x */ +#define EXYNOS850_HSI_PIN_DRV_LV1_5 1 /* 1.5x */ +#define EXYNOS850_HSI_PIN_DRV_LV2 2 /* 2x */ +#define EXYNOS850_HSI_PIN_DRV_LV2_5 3 /* 2.5x */ +#define EXYNOS850_HSI_PIN_DRV_LV3 4 /* 3x */ +#define EXYNOS850_HSI_PIN_DRV_LV4 5 /* 4x */ + +#define EXYNOS_PIN_FUNC_INPUT 0 +#define EXYNOS_PIN_FUNC_OUTPUT 1 +#define EXYNOS_PIN_FUNC_2 2 +#define EXYNOS_PIN_FUNC_3 3 +#define EXYNOS_PIN_FUNC_4 4 +#define EXYNOS_PIN_FUNC_5 5 +#define EXYNOS_PIN_FUNC_6 6 +#define EXYNOS_PIN_FUNC_EINT 0xf +#define EXYNOS_PIN_FUNC_F EXYNOS_PIN_FUNC_EINT + +#endif /* __DTS_ARM64_SAMSUNG_EXYNOS_PINCTRL_H__ */ diff --git a/dts/src/arm64/exynos/exynos5433-pinctrl.dtsi b/dts/src/arm64/exynos/exynos5433-pinctrl.dtsi index 4b46af3e16..681553577e 100644 --- a/dts/src/arm64/exynos/exynos5433-pinctrl.dtsi +++ b/dts/src/arm64/exynos/exynos5433-pinctrl.dtsi @@ -9,7 +9,7 @@ * tree nodes are listed in this file. */ -#include <dt-bindings/pinctrl/samsung.h> +#include "exynos-pinctrl.h" #define PIN(_pin, _func, _pull, _drv) \ pin- ## _pin { \ diff --git a/dts/src/arm64/exynos/exynos5433.dtsi b/dts/src/arm64/exynos/exynos5433.dtsi index 75b548e495..bd6a354b9c 100644 --- a/dts/src/arm64/exynos/exynos5433.dtsi +++ b/dts/src/arm64/exynos/exynos5433.dtsi @@ -1820,7 +1820,7 @@ }; }; - mshc_0: mshc@15540000 { + mshc_0: mmc@15540000 { compatible = "samsung,exynos7-dw-mshc-smu"; interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -1833,7 +1833,7 @@ status = "disabled"; }; - mshc_1: mshc@15550000 { + mshc_1: mmc@15550000 { compatible = "samsung,exynos7-dw-mshc-smu"; interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -1846,7 +1846,7 @@ status = "disabled"; }; - mshc_2: mshc@15560000 { + mshc_2: mmc@15560000 { compatible = "samsung,exynos7-dw-mshc-smu"; interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; diff --git a/dts/src/arm64/exynos/exynos7-espresso.dts b/dts/src/arm64/exynos/exynos7-espresso.dts index 0895e818d3..e38c59cf18 100644 --- a/dts/src/arm64/exynos/exynos7-espresso.dts +++ b/dts/src/arm64/exynos/exynos7-espresso.dts @@ -357,7 +357,7 @@ pmic_irq: pmic-irq-pins { samsung,pins = "gpa0-2"; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>; }; }; @@ -397,14 +397,14 @@ samsung,pins = "gph1-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; usb3drd_boost_en: usb3drd-boost-en-pins { samsung,pins = "gpf4-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; }; diff --git a/dts/src/arm64/exynos/exynos7-pinctrl.dtsi b/dts/src/arm64/exynos/exynos7-pinctrl.dtsi index be9b971f36..ee9c24a226 100644 --- a/dts/src/arm64/exynos/exynos7-pinctrl.dtsi +++ b/dts/src/arm64/exynos/exynos7-pinctrl.dtsi @@ -9,7 +9,7 @@ * device tree nodes in this file. */ -#include <dt-bindings/pinctrl/samsung.h> +#include "exynos-pinctrl.h" &pinctrl_alive { gpa0: gpa0-gpio-bank { @@ -188,161 +188,161 @@ samsung,pins = "gpb0-1", "gpb0-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; hs_i2c11_bus: hs-i2c11-bus-pins { samsung,pins = "gpb0-3", "gpb0-2"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; hs_i2c2_bus: hs-i2c2-bus-pins { samsung,pins = "gpd0-3", "gpd0-2"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; uart0_data: uart0-data-pins { samsung,pins = "gpd0-0", "gpd0-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; uart0_fctl: uart0-fctl-pins { samsung,pins = "gpd0-2", "gpd0-3"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; uart2_data: uart2-data-pins { samsung,pins = "gpd1-4", "gpd1-5"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; hs_i2c3_bus: hs-i2c3-bus-pins { samsung,pins = "gpd1-3", "gpd1-2"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; uart1_data: uart1-data-pins { samsung,pins = "gpd1-0", "gpd1-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; uart1_fctl: uart1-fctl-pins { samsung,pins = "gpd1-2", "gpd1-3"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; hs_i2c0_bus: hs-i2c0-bus-pins { samsung,pins = "gpd2-1", "gpd2-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; hs_i2c1_bus: hs-i2c1-bus-pins { samsung,pins = "gpd2-3", "gpd2-2"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; hs_i2c9_bus: hs-i2c9-bus-pins { samsung,pins = "gpd2-7", "gpd2-6"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; pwm0_out: pwm0-out-pins { samsung,pins = "gpd2-4"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; pwm1_out: pwm1-out-pins { samsung,pins = "gpd2-5"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; pwm2_out: pwm2-out-pins { samsung,pins = "gpd2-6"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; pwm3_out: pwm3-out-pins { samsung,pins = "gpd2-7"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; hs_i2c8_bus: hs-i2c8-bus-pins { samsung,pins = "gpd5-3", "gpd5-2"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; uart3_data: uart3-data-pins { samsung,pins = "gpd5-0", "gpd5-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; spi2_bus: spi2-bus-pins { samsung,pins = "gpd5-0", "gpd5-1", "gpd5-2", "gpd5-3"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; spi1_bus: spi1-bus-pins { samsung,pins = "gpd6-2", "gpd6-3", "gpd6-4", "gpd6-5"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; spi0_bus: spi0-bus-pins { samsung,pins = "gpd8-0", "gpd8-1", "gpd6-0", "gpd6-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; hs_i2c4_bus: hs-i2c4-bus-pins { samsung,pins = "gpg3-1", "gpg3-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; hs_i2c5_bus: hs-i2c5-bus-pins { samsung,pins = "gpg3-3", "gpg3-2"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; }; @@ -359,7 +359,7 @@ samsung,pins = "gpj0-1", "gpj0-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; }; @@ -376,7 +376,7 @@ samsung,pins = "gpj1-1", "gpj1-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; }; @@ -393,7 +393,7 @@ samsung,pins = "gpg4-0", "gpg4-1", "gpg4-2", "gpg4-3"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; }; @@ -410,7 +410,7 @@ samsung,pins = "gpv7-0", "gpv7-1", "gpv7-2", "gpv7-3"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; }; @@ -427,35 +427,35 @@ samsung,pins = "gpr4-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>; }; sd2_cmd: sd2-cmd-pins { samsung,pins = "gpr4-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>; }; sd2_cd: sd2-cd-pins { samsung,pins = "gpr4-2"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>; }; sd2_bus1: sd2-bus-width1-pins { samsung,pins = "gpr4-3"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>; }; sd2_bus4: sd2-bus-width4-pins { samsung,pins = "gpr4-4", "gpr4-5", "gpr4-6"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>; }; }; @@ -683,20 +683,20 @@ samsung,pins = "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; ufs_refclk_out: ufs-refclk-out-pins { samsung,pins = "gpg2-4"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV2>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV2>; }; ufs_rst_n: ufs-rst-n-pins { samsung,pins = "gph1-5"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; }; diff --git a/dts/src/arm64/exynos/exynos7885-jackpotlte.dts b/dts/src/arm64/exynos/exynos7885-jackpotlte.dts index 4cf9aa25f6..5db9a81ac7 100644 --- a/dts/src/arm64/exynos/exynos7885-jackpotlte.dts +++ b/dts/src/arm64/exynos/exynos7885-jackpotlte.dts @@ -60,6 +60,26 @@ }; }; +&mmc_0 { + status = "okay"; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + cap-mmc-highspeed; + non-removable; + mmc-hs400-enhanced-strobe; + card-detect-delay = <200>; + clock-frequency = <800000000>; + bus-width = <8>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <2 4>; + samsung,dw-mshc-hs400-timing = <0 2>; + + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk_fast_slew_rate_3x &sd0_cmd &sd0_rdqs + &sd0_bus1 &sd0_bus4 &sd0_bus8>; +}; + &oscclk { clock-frequency = <26000000>; }; diff --git a/dts/src/arm64/exynos/exynos7885-pinctrl.dtsi b/dts/src/arm64/exynos/exynos7885-pinctrl.dtsi index a50c1dbd55..34bb121919 100644 --- a/dts/src/arm64/exynos/exynos7885-pinctrl.dtsi +++ b/dts/src/arm64/exynos/exynos7885-pinctrl.dtsi @@ -9,8 +9,8 @@ * device tree nodes in this file. */ -#include <dt-bindings/pinctrl/samsung.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include "exynos-pinctrl.h" &pinctrl_alive { etc0: etc0-gpio-bank { diff --git a/dts/src/arm64/exynos/exynos7885.dtsi b/dts/src/arm64/exynos/exynos7885.dtsi index 9c233c5655..23c2e0bb0a 100644 --- a/dts/src/arm64/exynos/exynos7885.dtsi +++ b/dts/src/arm64/exynos/exynos7885.dtsi @@ -240,6 +240,25 @@ clock-names = "oscclk"; }; + cmu_fsys: clock-controller@13400000 { + compatible = "samsung,exynos7885-cmu-fsys"; + reg = <0x13400000 0x8000>; + #clock-cells = <1>; + + clocks = <&oscclk>, + <&cmu_top CLK_DOUT_FSYS_BUS>, + <&cmu_top CLK_DOUT_FSYS_MMC_CARD>, + <&cmu_top CLK_DOUT_FSYS_MMC_EMBD>, + <&cmu_top CLK_DOUT_FSYS_MMC_SDIO>, + <&cmu_top CLK_DOUT_FSYS_USB30DRD>; + clock-names = "oscclk", + "dout_fsys_bus", + "dout_fsys_mmc_card", + "dout_fsys_mmc_embd", + "dout_fsys_mmc_sdio", + "dout_fsys_usb30drd"; + }; + pinctrl_alive: pinctrl@11cb0000 { compatible = "samsung,exynos7885-pinctrl"; reg = <0x11cb0000 0x1000>; @@ -274,6 +293,19 @@ reg = <0x11c80000 0x10000>; }; + mmc_0: mmc@13500000 { + compatible = "samsung,exynos7-dw-mshc-smu"; + reg = <0x13500000 0x2000>; + interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cmu_fsys CLK_GOUT_MMC_EMBD_ACLK>, + <&cmu_fsys CLK_GOUT_MMC_EMBD_SDCLKIN>; + clock-names = "biu", "ciu"; + fifo-depth = <0x40>; + status = "disabled"; + }; + serial_0: serial@13800000 { compatible = "samsung,exynos5433-uart"; reg = <0x13800000 0x100>; diff --git a/dts/src/arm64/exynos/exynos850-pinctrl.dtsi b/dts/src/arm64/exynos/exynos850-pinctrl.dtsi index f43e4a2062..424bc80bde 100644 --- a/dts/src/arm64/exynos/exynos850-pinctrl.dtsi +++ b/dts/src/arm64/exynos/exynos850-pinctrl.dtsi @@ -10,7 +10,7 @@ */ #include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/pinctrl/samsung.h> +#include "exynos-pinctrl.h" &pinctrl_alive { gpa0: gpa0-gpio-bank { diff --git a/dts/src/arm64/exynos/exynosautov9-pinctrl.dtsi b/dts/src/arm64/exynos/exynosautov9-pinctrl.dtsi index ef0349d1c3..e413a51c2d 100644 --- a/dts/src/arm64/exynos/exynosautov9-pinctrl.dtsi +++ b/dts/src/arm64/exynos/exynosautov9-pinctrl.dtsi @@ -8,7 +8,7 @@ * device tree nodes in this file. */ -#include <dt-bindings/pinctrl/samsung.h> +#include "exynos-pinctrl.h" &pinctrl_alive { gpa0: gpa0-gpio-bank { @@ -1089,21 +1089,21 @@ /* PERIC1 USI11_SPI */ spi11_bus: spi11-pins { - samsung,pins = "gpp3-6", "gpp3-5", "gpp3-4"; + samsung,pins = "gpp5-6", "gpp5-5", "gpp5-4"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; }; spi11_cs: spi11-cs-pins { - samsung,pins = "gpp3-7"; + samsung,pins = "gpp5-7"; samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; }; spi11_cs_func: spi11-cs-func-pins { - samsung,pins = "gpp3-7"; + samsung,pins = "gpp5-7"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; diff --git a/dts/src/arm64/exynos/exynosautov9-sadk.dts b/dts/src/arm64/exynos/exynosautov9-sadk.dts index 17e568853e..eec3192c06 100644 --- a/dts/src/arm64/exynos/exynosautov9-sadk.dts +++ b/dts/src/arm64/exynos/exynosautov9-sadk.dts @@ -39,9 +39,18 @@ regulator-boot-on; enable-active-high; }; + + ufs_1_fixed_vcc_reg: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "ufs-vcc"; + gpio = <&gpg2 2 GPIO_ACTIVE_HIGH>; + regulator-boot-on; + enable-active-high; + }; }; &serial_0 { + pinctrl-0 = <&uart0_bus_dual>; status = "okay"; }; @@ -49,13 +58,24 @@ status = "okay"; }; +&ufs_1_phy { + status = "okay"; +}; + &ufs_0 { status = "okay"; vcc-supply = <&ufs_0_fixed_vcc_reg>; vcc-fixed-regulator; }; +&ufs_1 { + status = "okay"; + vcc-supply = <&ufs_1_fixed_vcc_reg>; + vcc-fixed-regulator; +}; + &usi_0 { + samsung,clkreq-on; /* needed for UART mode */ status = "okay"; }; diff --git a/dts/src/arm64/exynos/exynosautov9.dtsi b/dts/src/arm64/exynos/exynosautov9.dtsi index 0ce46ec5cd..2013718532 100644 --- a/dts/src/arm64/exynos/exynosautov9.dtsi +++ b/dts/src/arm64/exynos/exynosautov9.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/clock/samsung,exynosautov9.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/soc/samsung,boot-mode.h> #include <dt-bindings/soc/samsung,exynos-usi.h> / { @@ -265,6 +266,16 @@ IRQ_TYPE_LEVEL_HIGH)>; }; + pdma0: dma-controller@1b2e0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x1b2e0000 0x1000>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu_busmc CLK_GOUT_BUSMC_PDMA0_PCLK>; + clock-names = "apb_pclk"; + arm,pl330-broken-no-flushp; + #dma-cells = <1>; + }; + pinctrl_alive: pinctrl@10450000 { compatible = "samsung,exynosautov9-pinctrl"; reg = <0x10450000 0x1000>; @@ -312,6 +323,22 @@ pmu_system_controller: system-controller@10460000 { compatible = "samsung,exynos7-pmu", "syscon"; reg = <0x10460000 0x10000>; + + reboot: syscon-reboot { + compatible = "syscon-reboot"; + regmap = <&pmu_system_controller>; + offset = <0x3a00>; /* SYSTEM_CONFIGURATION */ + value = <0x2>; + mask = <0x2>; + }; + + reboot-mode { + compatible = "syscon-reboot-mode"; + offset = <0x810>; /* SYSIP_DAT0 */ + mode-bootloader = <EXYNOSAUTOV9_BOOT_BOOTLOADER>; + mode-fastboot = <EXYNOSAUTOV9_BOOT_FASTBOOT>; + mode-recovery = <EXYNOSAUTOV9_BOOT_RECOVERY>; + }; }; syscon_fsys2: syscon@17c20000 { @@ -324,12 +351,17 @@ reg = <0x10220000 0x2000>; }; + syscon_peric1: syscon@10820000 { + compatible = "samsung,exynosautov9-sysreg", "syscon"; + reg = <0x10820000 0x2000>; + }; + usi_0: usi@103000c0 { - compatible = "samsung,exynos850-usi"; + compatible = "samsung,exynosautov9-usi", + "samsung,exynos850-usi"; reg = <0x103000c0 0x20>; samsung,sysreg = <&syscon_peric0 0x1000>; samsung,mode = <USI_V2_UART>; - samsung,clkreq-on; /* needed for UART mode */ #address-cells = <1>; #size-cells = <1>; ranges; @@ -338,21 +370,1083 @@ clock-names = "pclk", "ipclk"; status = "disabled"; - /* USI: UART */ serial_0: serial@10300000 { - compatible = "samsung,exynos850-uart"; + compatible = "samsung,exynosautov9-uart", + "samsung,exynos850-uart"; reg = <0x10300000 0xc0>; interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&uart0_bus_dual>; + pinctrl-0 = <&uart0_bus>; clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_0>, <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_0>; clock-names = "uart", "clk_uart_baud0"; + samsung,uart-fifosize = <256>; + status = "disabled"; + }; + + spi_0: spi@10300000 { + compatible = "samsung,exynosautov9-spi"; + reg = <0x10300000 0x30>; + interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_bus &spi0_cs_func>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_0>, + <&cmu_peric0 CLK_DOUT_PERIC0_USI00_USI>, + <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_0>; + clock-names = "spi", "spi_busclk0", "spi_ioclk"; + samsung,spi-src-clk = <0>; + dmas = <&pdma0 1>, <&pdma0 0>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + hsi2c_0: i2c@10300000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x10300000 0xc0>; + interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hsi2c0_bus>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_0>, + <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_0>; + clock-names = "hsi2c", "hsi2c_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + usi_i2c_0: usi@103100c0 { + compatible = "samsung,exynosautov9-usi", + "samsung,exynos850-usi"; + reg = <0x103100c0 0x20>; + samsung,sysreg = <&syscon_peric0 0x1004>; + samsung,mode = <USI_V2_I2C>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_1>, + <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_1>; + clock-names = "pclk", "ipclk"; + status = "disabled"; + + hsi2c_1: i2c@10310000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x10310000 0xc0>; + interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hsi2c1_bus>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_1>, + <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_1>; + clock-names = "hsi2c", "hsi2c_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + usi_1: usi@103200c0 { + compatible = "samsung,exynosautov9-usi", + "samsung,exynos850-usi"; + reg = <0x103200c0 0x20>; + samsung,sysreg = <&syscon_peric0 0x1008>; + samsung,mode = <USI_V2_UART>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_2>, + <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_2>; + clock-names = "pclk", "ipclk"; + status = "disabled"; + + serial_1: serial@10320000 { + compatible = "samsung,exynosautov9-uart", + "samsung,exynos850-uart"; + reg = <0x10320000 0xc0>; + interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_bus>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_2>, + <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_2>; + clock-names = "uart", "clk_uart_baud0"; + samsung,uart-fifosize = <256>; + status = "disabled"; + }; + + spi_1: spi@10320000 { + compatible = "samsung,exynosautov9-spi"; + reg = <0x10320000 0x30>; + interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_bus &spi1_cs_func>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_2>, + <&cmu_peric0 CLK_DOUT_PERIC0_USI01_USI>, + <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_2>; + clock-names = "spi", "spi_busclk0", "spi_ioclk"; + samsung,spi-src-clk = <0>; + dmas = <&pdma0 3>, <&pdma0 2>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + hsi2c_2: i2c@10320000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x10320000 0xc0>; + interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hsi2c2_bus>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_2>, + <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_2>; + clock-names = "hsi2c", "hsi2c_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + usi_i2c_1: usi@103300c0 { + compatible = "samsung,exynosautov9-usi", + "samsung,exynos850-usi"; + reg = <0x103300c0 0x20>; + samsung,sysreg = <&syscon_peric0 0x100c>; + samsung,mode = <USI_V2_I2C>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_3>, + <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_3>; + clock-names = "pclk", "ipclk"; + status = "disabled"; + + hsi2c_3: i2c@10330000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x10330000 0xc0>; + interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hsi2c3_bus>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_3>, + <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_3>; + clock-names = "hsi2c", "hsi2c_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + usi_2: usi@103400c0 { + compatible = "samsung,exynosautov9-usi", + "samsung,exynos850-usi"; + reg = <0x103400c0 0x20>; + samsung,sysreg = <&syscon_peric0 0x1010>; + samsung,mode = <USI_V2_UART>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_4>, + <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_4>; + clock-names = "pclk", "ipclk"; + status = "disabled"; + + serial_2: serial@10340000 { + compatible = "samsung,exynosautov9-uart", + "samsung,exynos850-uart"; + reg = <0x10340000 0xc0>; + interrupts = <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_bus>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_4>, + <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_4>; + clock-names = "uart", "clk_uart_baud0"; + samsung,uart-fifosize = <64>; + status = "disabled"; + }; + + spi_2: spi@10340000 { + compatible = "samsung,exynosautov9-spi"; + reg = <0x10340000 0x30>; + interrupts = <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_bus &spi2_cs_func>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_4>, + <&cmu_peric0 CLK_DOUT_PERIC0_USI02_USI>, + <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_4>; + clock-names = "spi", "spi_busclk0", "spi_ioclk"; + samsung,spi-src-clk = <0>; + dmas = <&pdma0 5>, <&pdma0 4>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + hsi2c_4: i2c@10340000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x10340000 0xc0>; + interrupts = <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hsi2c4_bus>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_4>, + <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_4>; + clock-names = "hsi2c", "hsi2c_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + usi_i2c_2: usi@103500c0 { + compatible = "samsung,exynosautov9-usi", + "samsung,exynos850-usi"; + reg = <0x103500c0 0x20>; + samsung,sysreg = <&syscon_peric0 0x1014>; + samsung,mode = <USI_V2_I2C>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_5>, + <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_5>; + clock-names = "pclk", "ipclk"; + status = "disabled"; + + hsi2c_5: i2c@10350000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x10350000 0xc0>; + interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hsi2c5_bus>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_5>, + <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_5>; + clock-names = "hsi2c", "hsi2c_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + usi_3: usi@103600c0 { + compatible = "samsung,exynosautov9-usi", + "samsung,exynos850-usi"; + reg = <0x103600c0 0x20>; + samsung,sysreg = <&syscon_peric0 0x1018>; + samsung,mode = <USI_V2_UART>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_6>, + <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_6>; + clock-names = "pclk", "ipclk"; + status = "disabled"; + + serial_3: serial@10360000 { + compatible = "samsung,exynosautov9-uart", + "samsung,exynos850-uart"; + reg = <0x10360000 0xc0>; + interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&uart3_bus>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_6>, + <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_6>; + clock-names = "uart", "clk_uart_baud0"; + samsung,uart-fifosize = <64>; + status = "disabled"; + }; + + spi_3: spi@10360000 { + compatible = "samsung,exynosautov9-spi"; + reg = <0x10360000 0x30>; + interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi3_bus &spi3_cs_func>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_6>, + <&cmu_peric0 CLK_DOUT_PERIC0_USI03_USI>, + <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_6>; + clock-names = "spi", "spi_busclk0", "spi_ioclk"; + samsung,spi-src-clk = <0>; + dmas = <&pdma0 7>, <&pdma0 6>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + hsi2c_6: i2c@10360000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x10360000 0xc0>; + interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hsi2c6_bus>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_6>, + <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_6>; + clock-names = "hsi2c", "hsi2c_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + usi_i2c_3: usi@103700c0 { + compatible = "samsung,exynosautov9-usi", + "samsung,exynos850-usi"; + reg = <0x103700c0 0x20>; + samsung,sysreg = <&syscon_peric0 0x101c>; + samsung,mode = <USI_V2_I2C>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_7>, + <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_7>; + clock-names = "pclk", "ipclk"; + status = "disabled"; + + hsi2c_7: i2c@10370000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x10370000 0xc0>; + interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hsi2c7_bus>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_7>, + <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_7>; + clock-names = "hsi2c", "hsi2c_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + usi_4: usi@103800c0 { + compatible = "samsung,exynosautov9-usi", + "samsung,exynos850-usi"; + reg = <0x103800c0 0x20>; + samsung,sysreg = <&syscon_peric0 0x1020>; + samsung,mode = <USI_V2_UART>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_8>, + <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_8>; + clock-names = "pclk", "ipclk"; + status = "disabled"; + + serial_4: serial@10380000 { + compatible = "samsung,exynosautov9-uart", + "samsung,exynos850-uart"; + reg = <0x10380000 0xc0>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&uart4_bus>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_8>, + <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_8>; + clock-names = "uart", "clk_uart_baud0"; + samsung,uart-fifosize = <64>; + status = "disabled"; + }; + + spi_4: spi@10380000 { + compatible = "samsung,exynosautov9-spi"; + reg = <0x10380000 0x30>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi4_bus &spi4_cs_func>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_8>, + <&cmu_peric0 CLK_DOUT_PERIC0_USI04_USI>, + <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_8>; + clock-names = "spi", "spi_busclk0", "spi_ioclk"; + samsung,spi-src-clk = <0>; + dmas = <&pdma0 9>, <&pdma0 8>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + hsi2c_8: i2c@10380000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x10380000 0xc0>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hsi2c8_bus>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_8>, + <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_8>; + clock-names = "hsi2c", "hsi2c_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + usi_i2c_4: usi@103900c0 { + compatible = "samsung,exynosautov9-usi", + "samsung,exynos850-usi"; + reg = <0x103900c0 0x20>; + samsung,sysreg = <&syscon_peric0 0x1024>; + samsung,mode = <USI_V2_I2C>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_9>, + <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_9>; + clock-names = "pclk", "ipclk"; + status = "disabled"; + + hsi2c_9: i2c@10390000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x10390000 0xc0>; + interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hsi2c9_bus>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_9>, + <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_9>; + clock-names = "hsi2c", "hsi2c_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + usi_5: usi@103a00c0 { + compatible = "samsung,exynosautov9-usi", + "samsung,exynos850-usi"; + reg = <0x103a00c0 0x20>; + samsung,sysreg = <&syscon_peric0 0x1028>; + samsung,mode = <USI_V2_UART>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_10>, + <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_10>; + clock-names = "pclk", "ipclk"; + status = "disabled"; + + serial_5: serial@103a0000 { + compatible = "samsung,exynosautov9-uart", + "samsung,exynos850-uart"; + reg = <0x103a0000 0xc0>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&uart5_bus>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_10>, + <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_10>; + clock-names = "uart", "clk_uart_baud0"; + samsung,uart-fifosize = <64>; + status = "disabled"; + }; + + spi_5: spi@103a0000 { + compatible = "samsung,exynosautov9-spi"; + reg = <0x103a0000 0x30>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi5_bus &spi5_cs_func>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_10>, + <&cmu_peric0 CLK_DOUT_PERIC0_USI05_USI>, + <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_10>; + clock-names = "spi", "spi_busclk0", "spi_ioclk"; + samsung,spi-src-clk = <0>; + dmas = <&pdma0 11>, <&pdma0 10>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + hsi2c_10: i2c@103a0000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x103a0000 0xc0>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hsi2c10_bus>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_10>, + <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_10>; + clock-names = "hsi2c", "hsi2c_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + usi_i2c_5: usi@103b00c0 { + compatible = "samsung,exynosautov9-usi", + "samsung,exynos850-usi"; + reg = <0x103b00c0 0x20>; + samsung,sysreg = <&syscon_peric0 0x102c>; + samsung,mode = <USI_V2_I2C>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_11>, + <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_11>; + clock-names = "pclk", "ipclk"; + status = "disabled"; + + hsi2c_11: i2c@103b0000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x103b0000 0xc0>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hsi2c11_bus>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_11>, + <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_11>; + clock-names = "hsi2c", "hsi2c_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + usi_6: usi@109000c0 { + compatible = "samsung,exynosautov9-usi", + "samsung,exynos850-usi"; + reg = <0x109000c0 0x20>; + samsung,sysreg = <&syscon_peric1 0x1000>; + samsung,mode = <USI_V2_UART>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_0>, + <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_0>; + clock-names = "pclk", "ipclk"; + status = "disabled"; + + serial_6: serial@10900000 { + compatible = "samsung,exynosautov9-uart", + "samsung,exynos850-uart"; + reg = <0x10900000 0xc0>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&uart6_bus>; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_0>, + <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_0>; + clock-names = "uart", "clk_uart_baud0"; + samsung,uart-fifosize = <256>; + status = "disabled"; + }; + + spi_6: spi@10900000 { + compatible = "samsung,exynosautov9-spi"; + reg = <0x10900000 0x30>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi6_bus &spi6_cs_func>; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_0>, + <&cmu_peric1 CLK_DOUT_PERIC1_USI06_USI>, + <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_0>; + clock-names = "spi", "spi_busclk0", "spi_ioclk"; + samsung,spi-src-clk = <0>; + dmas = <&pdma0 13>, <&pdma0 12>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + hsi2c_12: i2c@10900000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x10900000 0xc0>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hsi2c12_bus>; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_0>, + <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_0>; + clock-names = "hsi2c", "hsi2c_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + usi_i2c_6: usi@109100c0 { + compatible = "samsung,exynosautov9-usi", + "samsung,exynos850-usi"; + reg = <0x109100c0 0x20>; + samsung,sysreg = <&syscon_peric1 0x1004>; + samsung,mode = <USI_V2_I2C>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_1>, + <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_1>; + clock-names = "pclk", "ipclk"; + status = "disabled"; + + hsi2c_13: i2c@10910000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x10910000 0xc0>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hsi2c13_bus>; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_1>, + <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_1>; + clock-names = "hsi2c", "hsi2c_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + usi_7: usi@109200c0 { + compatible = "samsung,exynosautov9-usi", + "samsung,exynos850-usi"; + reg = <0x109200c0 0x20>; + samsung,sysreg = <&syscon_peric1 0x1008>; + samsung,mode = <USI_V2_UART>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_2>, + <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_2>; + clock-names = "pclk", "ipclk"; + status = "disabled"; + + serial_7: serial@10920000 { + compatible = "samsung,exynosautov9-uart", + "samsung,exynos850-uart"; + reg = <0x10920000 0xc0>; + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&uart7_bus>; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_2>, + <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_2>; + clock-names = "uart", "clk_uart_baud0"; + samsung,uart-fifosize = <64>; + status = "disabled"; + }; + + spi_7: spi@10920000 { + compatible = "samsung,exynosautov9-spi"; + reg = <0x10920000 0x30>; + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi7_bus &spi7_cs_func>; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_2>, + <&cmu_peric1 CLK_DOUT_PERIC1_USI07_USI>, + <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_2>; + clock-names = "spi", "spi_busclk0", "spi_ioclk"; + samsung,spi-src-clk = <0>; + dmas = <&pdma0 15>, <&pdma0 14>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + hsi2c_14: i2c@10920000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x10920000 0xc0>; + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hsi2c14_bus>; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_2>, + <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_2>; + clock-names = "hsi2c", "hsi2c_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + usi_i2c_7: usi@109300c0 { + compatible = "samsung,exynosautov9-usi", + "samsung,exynos850-usi"; + reg = <0x109300c0 0x20>; + samsung,sysreg = <&syscon_peric1 0x100c>; + samsung,mode = <USI_V2_I2C>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_3>, + <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_3>; + clock-names = "pclk", "ipclk"; + status = "disabled"; + + hsi2c_15: i2c@10930000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x10930000 0xc0>; + interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hsi2c15_bus>; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_3>, + <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_3>; + clock-names = "hsi2c", "hsi2c_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + usi_8: usi@109400c0 { + compatible = "samsung,exynosautov9-usi", + "samsung,exynos850-usi"; + reg = <0x109400c0 0x20>; + samsung,sysreg = <&syscon_peric1 0x1010>; + samsung,mode = <USI_V2_UART>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_4>, + <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_4>; + clock-names = "pclk", "ipclk"; + status = "disabled"; + + serial_8: serial@10940000 { + compatible = "samsung,exynosautov9-uart", + "samsung,exynos850-uart"; + reg = <0x10940000 0xc0>; + interrupts = <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&uart8_bus>; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_4>, + <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_4>; + clock-names = "uart", "clk_uart_baud0"; + samsung,uart-fifosize = <64>; + status = "disabled"; + }; + + spi_8: spi@10940000 { + compatible = "samsung,exynosautov9-spi"; + reg = <0x10940000 0x30>; + interrupts = <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi8_bus &spi8_cs_func>; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_4>, + <&cmu_peric1 CLK_DOUT_PERIC1_USI08_USI>, + <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_4>; + clock-names = "spi", "spi_busclk0", "spi_ioclk"; + samsung,spi-src-clk = <0>; + dmas = <&pdma0 17>, <&pdma0 16>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + hsi2c_16: i2c@10940000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x10940000 0xc0>; + interrupts = <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hsi2c16_bus>; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_4>, + <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_4>; + clock-names = "hsi2c", "hsi2c_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + usi_i2c_8: usi@109500c0 { + compatible = "samsung,exynosautov9-usi", + "samsung,exynos850-usi"; + reg = <0x109500c0 0x20>; + samsung,sysreg = <&syscon_peric1 0x1014>; + samsung,mode = <USI_V2_I2C>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_5>, + <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_5>; + clock-names = "pclk", "ipclk"; + status = "disabled"; + + hsi2c_17: i2c@10950000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x10950000 0xc0>; + interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hsi2c17_bus>; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_5>, + <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_5>; + clock-names = "hsi2c", "hsi2c_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + usi_9: usi@109600c0 { + compatible = "samsung,exynosautov9-usi", + "samsung,exynos850-usi"; + reg = <0x109600c0 0x20>; + samsung,sysreg = <&syscon_peric1 0x1018>; + samsung,mode = <USI_V2_UART>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_6>, + <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_6>; + clock-names = "pclk", "ipclk"; + status = "disabled"; + + serial_9: serial@10960000 { + compatible = "samsung,exynosautov9-uart", + "samsung,exynos850-uart"; + reg = <0x10960000 0xc0>; + interrupts = <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&uart9_bus>; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_6>, + <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_6>; + clock-names = "uart", "clk_uart_baud0"; + samsung,uart-fifosize = <64>; + status = "disabled"; + }; + + spi_9: spi@10960000 { + compatible = "samsung,exynosautov9-spi"; + reg = <0x10960000 0x30>; + interrupts = <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi9_bus &spi9_cs_func>; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_6>, + <&cmu_peric1 CLK_DOUT_PERIC1_USI09_USI>, + <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_6>; + clock-names = "spi", "spi_busclk0", "spi_ioclk"; + samsung,spi-src-clk = <0>; + dmas = <&pdma0 19>, <&pdma0 18>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + hsi2c_18: i2c@10960000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x10960000 0xc0>; + interrupts = <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hsi2c18_bus>; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_6>, + <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_6>; + clock-names = "hsi2c", "hsi2c_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + usi_i2c_9: usi@109700c0 { + compatible = "samsung,exynosautov9-usi", + "samsung,exynos850-usi"; + reg = <0x109700c0 0x20>; + samsung,sysreg = <&syscon_peric1 0x101c>; + samsung,mode = <USI_V2_I2C>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_7>, + <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_7>; + clock-names = "pclk", "ipclk"; + status = "disabled"; + + hsi2c_19: i2c@10970000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x10970000 0xc0>; + interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hsi2c19_bus>; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_7>, + <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_7>; + clock-names = "hsi2c", "hsi2c_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + usi_10: usi@109800c0 { + compatible = "samsung,exynosautov9-usi", + "samsung,exynos850-usi"; + reg = <0x109800c0 0x20>; + samsung,sysreg = <&syscon_peric1 0x1020>; + samsung,mode = <USI_V2_UART>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_8>, + <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_8>; + clock-names = "pclk", "ipclk"; + status = "disabled"; + + serial_10: serial@10980000 { + compatible = "samsung,exynosautov9-uart", + "samsung,exynos850-uart"; + reg = <0x10980000 0xc0>; + interrupts = <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&uart10_bus>; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_8>, + <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_8>; + clock-names = "uart", "clk_uart_baud0"; + samsung,uart-fifosize = <64>; + status = "disabled"; + }; + + spi_10: spi@10980000 { + compatible = "samsung,exynosautov9-spi"; + reg = <0x10980000 0x30>; + interrupts = <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi10_bus &spi10_cs_func>; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_8>, + <&cmu_peric1 CLK_DOUT_PERIC1_USI10_USI>, + <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_8>; + clock-names = "spi", "spi_busclk0", "spi_ioclk"; + samsung,spi-src-clk = <0>; + dmas = <&pdma0 21>, <&pdma0 20>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + hsi2c_20: i2c@10980000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x10980000 0xc0>; + interrupts = <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hsi2c20_bus>; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_8>, + <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_8>; + clock-names = "hsi2c", "hsi2c_pclk"; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; }; - ufs_0_phy: ufs0-phy@17e04000 { + usi_i2c_10: usi@109900c0 { + compatible = "samsung,exynosautov9-usi", + "samsung,exynos850-usi"; + reg = <0x109900c0 0x20>; + samsung,sysreg = <&syscon_peric1 0x1024>; + samsung,mode = <USI_V2_I2C>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_9>, + <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_9>; + clock-names = "pclk", "ipclk"; + status = "disabled"; + + hsi2c_21: i2c@10990000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x10990000 0xc0>; + interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hsi2c21_bus>; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_9>, + <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_9>; + clock-names = "hsi2c", "hsi2c_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + usi_11: usi@109a00c0 { + compatible = "samsung,exynosautov9-usi", + "samsung,exynos850-usi"; + reg = <0x109a00c0 0x20>; + samsung,sysreg = <&syscon_peric1 0x1028>; + samsung,mode = <USI_V2_UART>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_10>, + <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_10>; + clock-names = "pclk", "ipclk"; + status = "disabled"; + + serial_11: serial@109a0000 { + compatible = "samsung,exynosautov9-uart", + "samsung,exynos850-uart"; + reg = <0x109a0000 0xc0>; + interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&uart11_bus>; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_10>, + <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_10>; + clock-names = "uart", "clk_uart_baud0"; + samsung,uart-fifosize = <64>; + status = "disabled"; + }; + + spi_11: spi@109a0000 { + compatible = "samsung,exynosautov9-spi"; + reg = <0x109a0000 0x30>; + interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi11_bus &spi11_cs_func>; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_10>, + <&cmu_peric1 CLK_DOUT_PERIC1_USI11_USI>, + <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_10>; + clock-names = "spi", "spi_busclk0", "spi_ioclk"; + samsung,spi-src-clk = <0>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + hsi2c_22: i2c@109a0000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x109a0000 0xc0>; + pinctrl-names = "default"; + pinctrl-0 = <&hsi2c22_bus>; + interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_10>, + <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_10>; + clock-names = "hsi2c", "hsi2c_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + usi_i2c_11: usi@109b00c0 { + compatible = "samsung,exynosautov9-usi", + "samsung,exynos850-usi"; + reg = <0x109b00c0 0x20>; + samsung,sysreg = <&syscon_peric1 0x102c>; + samsung,mode = <USI_V2_I2C>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_11>, + <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_11>; + clock-names = "pclk", "ipclk"; + status = "disabled"; + + hsi2c_23: i2c@109b0000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x109b0000 0xc0>; + interrupts = <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hsi2c23_bus>; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_11>, + <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_11>; + clock-names = "hsi2c", "hsi2c_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + ufs_0_phy: phy@17e04000 { compatible = "samsung,exynosautov9-ufs-phy"; reg = <0x17e04000 0xc00>; reg-names = "phy-pma"; @@ -363,13 +1457,13 @@ status = "disabled"; }; - ufs_0: ufs0@17e00000 { - compatible ="samsung,exynosautov9-ufs"; + ufs_0: ufs@17e00000 { + compatible = "samsung,exynosautov9-ufs"; - reg = <0x17e00000 0x100>, /* 0: HCI standard */ - <0x17e01100 0x410>, /* 1: Vendor-specific */ - <0x17e80000 0x8000>, /* 2: UNIPRO */ - <0x17dc0000 0x2200>; /* 3: UFS protector */ + reg = <0x17e00000 0x100>, + <0x17e01100 0x410>, + <0x17e80000 0x8000>, + <0x17dc0000 0x2200>; reg-names = "hci", "vs_hci", "unipro", "ufsp"; interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu_fsys2 CLK_GOUT_FSYS2_UFS_EMBD0_ACLK>, @@ -383,6 +1477,58 @@ samsung,sysreg = <&syscon_fsys2 0x710>; status = "disabled"; }; + + ufs_1_phy: phy@17f04000 { + compatible = "samsung,exynosautov9-ufs-phy"; + reg = <0x17f04000 0xc00>; + reg-names = "phy-pma"; + samsung,pmu-syscon = <&pmu_system_controller 0x72c>; + #phy-cells = <0>; + clocks = <&xtcxo>; + clock-names = "ref_clk"; + status = "disabled"; + }; + + ufs_1: ufs@17f00000 { + compatible = "samsung,exynosautov9-ufs"; + + reg = <0x17f00000 0x100>, + <0x17f01100 0x410>, + <0x17f80000 0x8000>, + <0x17de0000 0x2200>; + reg-names = "hci", "vs_hci", "unipro", "ufsp"; + interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu_fsys2 CLK_GOUT_FSYS2_UFS_EMBD1_ACLK>, + <&cmu_fsys2 CLK_GOUT_FSYS2_UFS_EMBD1_UNIPRO>; + clock-names = "core_clk", "sclk_unipro_main"; + freq-table-hz = <0 0>, <0 0>; + pinctrl-names = "default"; + pinctrl-0 = <&ufs_rst_n_1 &ufs_refclk_out_1>; + phys = <&ufs_1_phy>; + phy-names = "ufs-phy"; + samsung,sysreg = <&syscon_fsys2 0x714>; + status = "disabled"; + }; + + watchdog_cl0: watchdog@10050000 { + compatible = "samsung,exynosautov9-wdt"; + reg = <0x10050000 0x100>; + interrupts = <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu_peris CLK_GOUT_WDT_CLUSTER0>, <&xtcxo>; + clock-names = "watchdog", "watchdog_src"; + samsung,syscon-phandle = <&pmu_system_controller>; + samsung,cluster-index = <0>; + }; + + watchdog_cl1: watchdog@10060000 { + compatible = "samsung,exynosautov9-wdt"; + reg = <0x10060000 0x100>; + interrupts = <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu_peris CLK_GOUT_WDT_CLUSTER1>, <&xtcxo>; + clock-names = "watchdog", "watchdog_src"; + samsung,syscon-phandle = <&pmu_system_controller>; + samsung,cluster-index = <1>; + }; }; }; diff --git a/dts/src/arm64/freescale/fsl-ls1012a-qds.dts b/dts/src/arm64/freescale/fsl-ls1012a-qds.dts index e22c5e77fe..5a8d85a7d1 100644 --- a/dts/src/arm64/freescale/fsl-ls1012a-qds.dts +++ b/dts/src/arm64/freescale/fsl-ls1012a-qds.dts @@ -69,7 +69,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "n25q128a11", "jedec,spi-nor"; + compatible = "micron,n25q128a11", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <10000000>; }; diff --git a/dts/src/arm64/freescale/fsl-ls1012a.dtsi b/dts/src/arm64/freescale/fsl-ls1012a.dtsi index 50a72cda47..a863022529 100644 --- a/dts/src/arm64/freescale/fsl-ls1012a.dtsi +++ b/dts/src/arm64/freescale/fsl-ls1012a.dtsi @@ -204,7 +204,7 @@ compatible = "fsl,sec-v5.4-job-ring", "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x10000 0x10000>; + reg = <0x10000 0x10000>; interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; }; @@ -212,7 +212,7 @@ compatible = "fsl,sec-v5.4-job-ring", "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x20000 0x10000>; + reg = <0x20000 0x10000>; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; }; @@ -220,7 +220,7 @@ compatible = "fsl,sec-v5.4-job-ring", "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x30000 0x10000>; + reg = <0x30000 0x10000>; interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; }; @@ -228,7 +228,7 @@ compatible = "fsl,sec-v5.4-job-ring", "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x40000 0x10000>; + reg = <0x40000 0x10000>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; }; @@ -271,6 +271,14 @@ }; }; + sfp: efuse@1e80000 { + compatible = "fsl,ls1021a-sfp"; + reg = <0x0 0x1e80000 0x0 0x10000>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; + clock-names = "sfp"; + }; + sec_mon: sec_mon@1e90000 { compatible = "fsl,sec-v5.4-mon", "fsl,sec-v5.0-mon", "fsl,sec-v4.0-mon"; @@ -465,7 +473,7 @@ status = "disabled"; }; - edma0: edma@2c00000 { + edma0: dma-controller@2c00000 { #dma-cells = <2>; compatible = "fsl,vf610-edma"; reg = <0x0 0x2c00000 0x0 0x10000>, diff --git a/dts/src/arm64/freescale/fsl-ls1028a-qds.dts b/dts/src/arm64/freescale/fsl-ls1028a-qds.dts index 5baf060acf..0bb2f28a04 100644 --- a/dts/src/arm64/freescale/fsl-ls1028a-qds.dts +++ b/dts/src/arm64/freescale/fsl-ls1028a-qds.dts @@ -93,7 +93,7 @@ compatible = "mdio-mux-multiplexer"; mux-controls = <&mux 0>; mdio-parent-bus = <&enetc_mdio_pf3>; - #address-cells=<1>; + #address-cells = <1>; #size-cells = <0>; /* on-board RGMII PHY */ diff --git a/dts/src/arm64/freescale/fsl-ls1028a.dtsi b/dts/src/arm64/freescale/fsl-ls1028a.dtsi index d5cdd77e5a..5627dd7734 100644 --- a/dts/src/arm64/freescale/fsl-ls1028a.dtsi +++ b/dts/src/arm64/freescale/fsl-ls1028a.dtsi @@ -96,7 +96,7 @@ }; reboot { - compatible ="syscon-reboot"; + compatible = "syscon-reboot"; regmap = <&rst>; offset = <0>; mask = <0x02>; @@ -120,13 +120,13 @@ }; gic: interrupt-controller@6000000 { - compatible= "arm,gic-v3"; + compatible = "arm,gic-v3"; #address-cells = <2>; #size-cells = <2>; ranges; - reg= <0x0 0x06000000 0 0x10000>, /* GIC Dist */ + reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */ <0x0 0x06040000 0 0x40000>; /* GIC Redistributor */ - #interrupt-cells= <3>; + #interrupt-cells = <3>; interrupt-controller; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>; @@ -772,28 +772,28 @@ sec_jr0: jr@10000 { compatible = "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x10000 0x10000>; + reg = <0x10000 0x10000>; interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; }; sec_jr1: jr@20000 { compatible = "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x20000 0x10000>; + reg = <0x20000 0x10000>; interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; }; sec_jr2: jr@30000 { compatible = "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x30000 0x10000>; + reg = <0x30000 0x10000>; interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; }; sec_jr3: jr@40000 { compatible = "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x40000 0x10000>; + reg = <0x40000 0x10000>; interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; }; }; diff --git a/dts/src/arm64/freescale/fsl-ls1043a.dtsi b/dts/src/arm64/freescale/fsl-ls1043a.dtsi index 21200cbf71..ca3d5a90d6 100644 --- a/dts/src/arm64/freescale/fsl-ls1043a.dtsi +++ b/dts/src/arm64/freescale/fsl-ls1043a.dtsi @@ -144,7 +144,7 @@ }; reboot { - compatible ="syscon-reboot"; + compatible = "syscon-reboot"; regmap = <&dcfg>; offset = <0xb0>; mask = <0x02>; @@ -354,7 +354,7 @@ compatible = "fsl,sec-v5.4-job-ring", "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x10000 0x10000>; + reg = <0x10000 0x10000>; interrupts = <0 71 0x4>; }; @@ -362,7 +362,7 @@ compatible = "fsl,sec-v5.4-job-ring", "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x20000 0x10000>; + reg = <0x20000 0x10000>; interrupts = <0 72 0x4>; }; @@ -370,7 +370,7 @@ compatible = "fsl,sec-v5.4-job-ring", "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x30000 0x10000>; + reg = <0x30000 0x10000>; interrupts = <0 73 0x4>; }; @@ -378,11 +378,19 @@ compatible = "fsl,sec-v5.4-job-ring", "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x40000 0x10000>; + reg = <0x40000 0x10000>; interrupts = <0 74 0x4>; }; }; + sfp: efuse@1e80000 { + compatible = "fsl,ls1021a-sfp"; + reg = <0x0 0x1e80000 0x0 0x10000>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; + clock-names = "sfp"; + }; + dcfg: dcfg@1ee0000 { compatible = "fsl,ls1043a-dcfg", "syscon"; reg = <0x0 0x1ee0000 0x0 0x10000>; @@ -784,7 +792,7 @@ big-endian; }; - edma0: edma@2c00000 { + edma0: dma-controller@2c00000 { #dma-cells = <2>; compatible = "fsl,vf610-edma"; reg = <0x0 0x2c00000 0x0 0x10000>, diff --git a/dts/src/arm64/freescale/fsl-ls1046a.dtsi b/dts/src/arm64/freescale/fsl-ls1046a.dtsi index 0085e83adf..feab604322 100644 --- a/dts/src/arm64/freescale/fsl-ls1046a.dtsi +++ b/dts/src/arm64/freescale/fsl-ls1046a.dtsi @@ -112,7 +112,7 @@ }; reboot { - compatible ="syscon-reboot"; + compatible = "syscon-reboot"; regmap = <&dcfg>; offset = <0xb0>; mask = <0x02>; @@ -360,7 +360,7 @@ compatible = "fsl,sec-v5.4-job-ring", "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x10000 0x10000>; + reg = <0x10000 0x10000>; interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; }; @@ -368,7 +368,7 @@ compatible = "fsl,sec-v5.4-job-ring", "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x20000 0x10000>; + reg = <0x20000 0x10000>; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; }; @@ -376,7 +376,7 @@ compatible = "fsl,sec-v5.4-job-ring", "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x30000 0x10000>; + reg = <0x30000 0x10000>; interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; }; @@ -384,7 +384,7 @@ compatible = "fsl,sec-v5.4-job-ring", "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x40000 0x10000>; + reg = <0x40000 0x10000>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; }; }; @@ -413,6 +413,14 @@ ranges = <0x0 0x5 0x08000000 0x8000000>; }; + sfp: efuse@1e80000 { + compatible = "fsl,ls1021a-sfp"; + reg = <0x0 0x1e80000 0x0 0x10000>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; + clock-names = "sfp"; + }; + dcfg: dcfg@1ee0000 { compatible = "fsl,ls1046a-dcfg", "syscon"; reg = <0x0 0x1ee0000 0x0 0x1000>; @@ -683,7 +691,7 @@ big-endian; }; - edma0: edma@2c00000 { + edma0: dma-controller@2c00000 { #dma-cells = <2>; compatible = "fsl,vf610-edma"; reg = <0x0 0x2c00000 0x0 0x10000>, diff --git a/dts/src/arm64/freescale/fsl-ls1088a-ten64.dts b/dts/src/arm64/freescale/fsl-ls1088a-ten64.dts index d3f03dcbb8..ef6c896753 100644 --- a/dts/src/arm64/freescale/fsl-ls1088a-ten64.dts +++ b/dts/src/arm64/freescale/fsl-ls1088a-ten64.dts @@ -35,14 +35,14 @@ * external power off (e.g ATX Power Button) * asserted */ - powerdn { + button-powerdn { label = "External Power Down"; gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; }; /* Rear Panel 'ADMIN' button (GPIO_H) */ - admin { + button-admin { label = "ADMIN button"; gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>; linux,code = <KEY_WPS_BUTTON>; @@ -52,17 +52,17 @@ leds { compatible = "gpio-leds"; - sfp1down { + led-0 { label = "ten64:green:sfp1:down"; gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>; }; - sfp2up { + led-1 { label = "ten64:green:sfp2:up"; gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>; }; - admin { + led-2 { label = "ten64:admin"; gpios = <&sfpgpio 12 GPIO_ACTIVE_HIGH>; }; diff --git a/dts/src/arm64/freescale/fsl-ls1088a.dtsi b/dts/src/arm64/freescale/fsl-ls1088a.dtsi index f476b7d8b0..421d879013 100644 --- a/dts/src/arm64/freescale/fsl-ls1088a.dtsi +++ b/dts/src/arm64/freescale/fsl-ls1088a.dtsi @@ -269,6 +269,14 @@ }; }; + sfp: efuse@1e80000 { + compatible = "fsl,ls1028a-sfp"; + reg = <0x0 0x1e80000 0x0 0x10000>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; + clock-names = "sfp"; + }; + tmu: tmu@1f80000 { compatible = "fsl,qoriq-tmu"; reg = <0x0 0x1f80000 0x0 0x10000>; @@ -526,28 +534,28 @@ sec_jr0: jr@10000 { compatible = "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x10000 0x10000>; + reg = <0x10000 0x10000>; interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; }; sec_jr1: jr@20000 { compatible = "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x20000 0x10000>; + reg = <0x20000 0x10000>; interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; }; sec_jr2: jr@30000 { compatible = "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x30000 0x10000>; + reg = <0x30000 0x10000>; interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; }; sec_jr3: jr@40000 { compatible = "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x40000 0x10000>; + reg = <0x40000 0x10000>; interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; }; }; diff --git a/dts/src/arm64/freescale/fsl-ls208xa.dtsi b/dts/src/arm64/freescale/fsl-ls208xa.dtsi index 4ba1e0499d..d76f1c42f3 100644 --- a/dts/src/arm64/freescale/fsl-ls208xa.dtsi +++ b/dts/src/arm64/freescale/fsl-ls208xa.dtsi @@ -73,7 +73,7 @@ }; reboot { - compatible ="syscon-reboot"; + compatible = "syscon-reboot"; regmap = <&rstcr>; offset = <0x0>; mask = <0x2>; @@ -278,6 +278,14 @@ little-endian; }; + sfp: efuse@1e80000 { + compatible = "fsl,ls1028a-sfp"; + reg = <0x0 0x1e80000 0x0 0x10000>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; + clock-names = "sfp"; + }; + isc: syscon@1f70000 { compatible = "fsl,ls2080a-isc", "syscon"; reg = <0x0 0x1f70000 0x0 0x10000>; @@ -479,28 +487,28 @@ sec_jr0: jr@10000 { compatible = "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x10000 0x10000>; + reg = <0x10000 0x10000>; interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; }; sec_jr1: jr@20000 { compatible = "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x20000 0x10000>; + reg = <0x20000 0x10000>; interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; }; sec_jr2: jr@30000 { compatible = "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x30000 0x10000>; + reg = <0x30000 0x10000>; interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; }; sec_jr3: jr@40000 { compatible = "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x40000 0x10000>; + reg = <0x40000 0x10000>; interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; }; }; diff --git a/dts/src/arm64/freescale/fsl-lx2160a-clearfog-itx.dtsi b/dts/src/arm64/freescale/fsl-lx2160a-clearfog-itx.dtsi index 41702e7386..a7dcbecc1f 100644 --- a/dts/src/arm64/freescale/fsl-lx2160a-clearfog-itx.dtsi +++ b/dts/src/arm64/freescale/fsl-lx2160a-clearfog-itx.dtsi @@ -34,28 +34,28 @@ sfp0: sfp-0 { compatible = "sff,sfp"; i2c-bus = <&sfp0_i2c>; - mod-def0-gpio = <&gpio2 0 GPIO_ACTIVE_LOW>; + mod-def0-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; maximum-power-milliwatt = <2000>; }; sfp1: sfp-1 { compatible = "sff,sfp"; i2c-bus = <&sfp1_i2c>; - mod-def0-gpio = <&gpio2 9 GPIO_ACTIVE_LOW>; + mod-def0-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>; maximum-power-milliwatt = <2000>; }; sfp2: sfp-2 { compatible = "sff,sfp"; i2c-bus = <&sfp2_i2c>; - mod-def0-gpio = <&gpio2 10 GPIO_ACTIVE_LOW>; + mod-def0-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; maximum-power-milliwatt = <2000>; }; sfp3: sfp-3 { compatible = "sff,sfp"; i2c-bus = <&sfp3_i2c>; - mod-def0-gpio = <&gpio2 11 GPIO_ACTIVE_LOW>; + mod-def0-gpios = <&gpio2 11 GPIO_ACTIVE_LOW>; maximum-power-milliwatt = <2000>; }; }; diff --git a/dts/src/arm64/freescale/fsl-lx2160a-qds.dts b/dts/src/arm64/freescale/fsl-lx2160a-qds.dts index 2ecfa90f5e..4d721197d8 100644 --- a/dts/src/arm64/freescale/fsl-lx2160a-qds.dts +++ b/dts/src/arm64/freescale/fsl-lx2160a-qds.dts @@ -36,7 +36,7 @@ compatible = "mdio-mux-multiplexer"; mux-controls = <&mux 0>; mdio-parent-bus = <&emdio1>; - #address-cells=<1>; + #address-cells = <1>; #size-cells = <0>; mdio@0 { /* On-board PHY #1 RGMI1*/ @@ -104,7 +104,7 @@ compatible = "mdio-mux-multiplexer"; mux-controls = <&mux 1>; mdio-parent-bus = <&emdio2>; - #address-cells=<1>; + #address-cells = <1>; #size-cells = <0>; mdio@0 { /* Slot #1 (secondary EMI) */ diff --git a/dts/src/arm64/freescale/fsl-lx2160a.dtsi b/dts/src/arm64/freescale/fsl-lx2160a.dtsi index 47ea854720..6680fb2a6d 100644 --- a/dts/src/arm64/freescale/fsl-lx2160a.dtsi +++ b/dts/src/arm64/freescale/fsl-lx2160a.dtsi @@ -632,28 +632,28 @@ sec_jr0: jr@10000 { compatible = "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x10000 0x10000>; + reg = <0x10000 0x10000>; interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; }; sec_jr1: jr@20000 { compatible = "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x20000 0x10000>; + reg = <0x20000 0x10000>; interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; }; sec_jr2: jr@30000 { compatible = "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x30000 0x10000>; + reg = <0x30000 0x10000>; interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; }; sec_jr3: jr@40000 { compatible = "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x40000 0x10000>; + reg = <0x40000 0x10000>; interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; }; }; @@ -671,6 +671,14 @@ little-endian; }; + sfp: efuse@1e80000 { + compatible = "fsl,ls1028a-sfp"; + reg = <0x0 0x1e80000 0x0 0x10000>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; + clock-names = "sfp"; + }; + isc: syscon@1f70000 { compatible = "fsl,lx2160a-isc", "syscon"; reg = <0x0 0x1f70000 0x0 0x10000>; diff --git a/dts/src/arm64/freescale/fsl-lx2162a-qds.dts b/dts/src/arm64/freescale/fsl-lx2162a-qds.dts index a1644ceed1..9f5ff1ffe7 100644 --- a/dts/src/arm64/freescale/fsl-lx2162a-qds.dts +++ b/dts/src/arm64/freescale/fsl-lx2162a-qds.dts @@ -34,7 +34,7 @@ compatible = "mdio-mux-multiplexer"; mux-controls = <&mux 0>; mdio-parent-bus = <&emdio1>; - #address-cells=<1>; + #address-cells = <1>; #size-cells = <0>; mdio@0 { /* On-board RTL8211F PHY #1 RGMII1 */ @@ -114,7 +114,7 @@ compatible = "mdio-mux-multiplexer"; mux-controls = <&mux 1>; mdio-parent-bus = <&emdio2>; - #address-cells=<1>; + #address-cells = <1>; #size-cells = <0>; mdio@0 { /* Slot #1 (secondary EMI) */ diff --git a/dts/src/arm64/freescale/imx8-ss-conn.dtsi b/dts/src/arm64/freescale/imx8-ss-conn.dtsi index a79f42a961..82a1c44883 100644 --- a/dts/src/arm64/freescale/imx8-ss-conn.dtsi +++ b/dts/src/arm64/freescale/imx8-ss-conn.dtsi @@ -54,7 +54,7 @@ conn_subsys: bus@5b000000 { clock-names = "ipg", "per", "ahb"; power-domains = <&pd IMX_SC_R_SDHC_1>; fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; status = "disabled"; }; @@ -83,8 +83,8 @@ conn_subsys: bus@5b000000 { assigned-clocks = <&clk IMX_SC_R_ENET_0 IMX_SC_PM_CLK_PER>, <&clk IMX_SC_R_ENET_0 IMX_SC_C_CLKDIV>; assigned-clock-rates = <250000000>, <125000000>; - fsl,num-tx-queues=<3>; - fsl,num-rx-queues=<3>; + fsl,num-tx-queues = <3>; + fsl,num-rx-queues = <3>; power-domains = <&pd IMX_SC_R_ENET_0>; status = "disabled"; }; @@ -103,8 +103,8 @@ conn_subsys: bus@5b000000 { assigned-clocks = <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>, <&clk IMX_SC_R_ENET_1 IMX_SC_C_CLKDIV>; assigned-clock-rates = <250000000>, <125000000>; - fsl,num-tx-queues=<3>; - fsl,num-rx-queues=<3>; + fsl,num-tx-queues = <3>; + fsl,num-rx-queues = <3>; power-domains = <&pd IMX_SC_R_ENET_1>; status = "disabled"; }; diff --git a/dts/src/arm64/freescale/imx8mm-beacon-baseboard.dtsi b/dts/src/arm64/freescale/imx8mm-beacon-baseboard.dtsi index f338a886d8..03266bd90a 100644 --- a/dts/src/arm64/freescale/imx8mm-beacon-baseboard.dtsi +++ b/dts/src/arm64/freescale/imx8mm-beacon-baseboard.dtsi @@ -285,14 +285,14 @@ &usbotg1 { vbus-supply = <®_usbotg1>; disable-over-current; - dr_mode="otg"; + dr_mode = "otg"; status = "okay"; }; &usbotg2 { pinctrl-names = "default"; disable-over-current; - dr_mode="host"; + dr_mode = "host"; status = "okay"; }; diff --git a/dts/src/arm64/freescale/imx8mm-evk.dtsi b/dts/src/arm64/freescale/imx8mm-evk.dtsi index c42b966f7a..7d6317d95b 100644 --- a/dts/src/arm64/freescale/imx8mm-evk.dtsi +++ b/dts/src/arm64/freescale/imx8mm-evk.dtsi @@ -75,6 +75,11 @@ linux,autosuspend-period = <125>; }; + audio_codec_bt_sco: audio-codec-bt-sco { + compatible = "linux,bt-sco"; + #sound-dai-cells = <1>; + }; + wm8524: audio-codec { #sound-dai-cells = <0>; compatible = "wlf,wm8524"; @@ -83,6 +88,25 @@ wlf,mute-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>; }; + sound-bt-sco { + compatible = "simple-audio-card"; + simple-audio-card,name = "bt-sco-audio"; + simple-audio-card,format = "dsp_a"; + simple-audio-card,bitclock-inversion; + simple-audio-card,frame-master = <&btcpu>; + simple-audio-card,bitclock-master = <&btcpu>; + + btcpu: simple-audio-card,cpu { + sound-dai = <&sai2>; + dai-tdm-slot-num = <2>; + dai-tdm-slot-width = <16>; + }; + + simple-audio-card,codec { + sound-dai = <&audio_codec_bt_sco 1>; + }; + }; + sound-wm8524 { compatible = "simple-audio-card"; simple-audio-card,name = "wm8524-audio"; @@ -346,6 +370,16 @@ status = "okay"; }; +&sai2 { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2>; + assigned-clocks = <&clk IMX8MM_CLK_SAI2>; + assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + status = "okay"; +}; + &sai3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sai3>; @@ -494,6 +528,15 @@ >; }; + pinctrl_sai2: sai2grp { + fsl,pins = < + MX8MM_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6 + MX8MM_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6 + MX8MM_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6 + MX8MM_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0xd6 + >; + }; + pinctrl_sai3: sai3grp { fsl,pins = < MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6 diff --git a/dts/src/arm64/freescale/imx8mm-icore-mx8mm.dtsi b/dts/src/arm64/freescale/imx8mm-icore-mx8mm.dtsi index b40148d728..9e6170d939 100644 --- a/dts/src/arm64/freescale/imx8mm-icore-mx8mm.dtsi +++ b/dts/src/arm64/freescale/imx8mm-icore-mx8mm.dtsi @@ -84,42 +84,42 @@ }; reg_buck1: buck1 { - regulator-min-microvolt = <400000>; + regulator-min-microvolt = <400000>; regulator-max-microvolt = <1800000>; regulator-always-on; regulator-boot-on; }; reg_buck2: buck2 { - regulator-min-microvolt = <400000>; + regulator-min-microvolt = <400000>; regulator-max-microvolt = <1800000>; regulator-always-on; regulator-boot-on; }; reg_buck3: buck3 { - regulator-min-microvolt = <400000>; + regulator-min-microvolt = <400000>; regulator-max-microvolt = <1800000>; regulator-always-on; regulator-boot-on; }; reg_buck4: buck4 { - regulator-min-microvolt = <400000>; + regulator-min-microvolt = <400000>; regulator-max-microvolt = <1800000>; regulator-always-on; regulator-boot-on; }; reg_buck5: buck5 { - regulator-min-microvolt = <400000>; + regulator-min-microvolt = <400000>; regulator-max-microvolt = <1800000>; regulator-always-on; regulator-boot-on; }; reg_buck6: buck6 { - regulator-min-microvolt = <400000>; + regulator-min-microvolt = <400000>; regulator-max-microvolt = <1800000>; regulator-always-on; regulator-boot-on; diff --git a/dts/src/arm64/freescale/imx8mm-mx8menlo.dts b/dts/src/arm64/freescale/imx8mm-mx8menlo.dts index 92eaf4ef45..c97f4e06ae 100644 --- a/dts/src/arm64/freescale/imx8mm-mx8menlo.dts +++ b/dts/src/arm64/freescale/imx8mm-mx8menlo.dts @@ -20,13 +20,13 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_led>; - user1 { + led-1 { label = "TestLed601"; gpios = <&gpio4 18 GPIO_ACTIVE_HIGH>; linux,default-trigger = "mmc0"; }; - user2 { + led-2 { label = "TestLed602"; gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; diff --git a/dts/src/arm64/freescale/imx8mm-phyboard-polis-rdk.dts b/dts/src/arm64/freescale/imx8mm-phyboard-polis-rdk.dts new file mode 100644 index 0000000000..4a3df2b77b --- /dev/null +++ b/dts/src/arm64/freescale/imx8mm-phyboard-polis-rdk.dts @@ -0,0 +1,450 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2022 PHYTEC Messtechnik GmbH + * Author: Teresa Remmet <t.remmet@phytec.de> + */ + +/dts-v1/; + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/phy/phy-imx8-pcie.h> +#include "imx8mm-phycore-som.dtsi" + +/ { + model = "PHYTEC phyBOARD-Polis-i.MX8MM RDK"; + compatible = "phytec,imx8mm-phyboard-polis-rdk", + "phytec,imx8mm-phycore-som", "fsl,imx8mm"; + + chosen { + stdout-path = &uart3; + }; + + bt_osc_32k: bt-lp-clock { + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "bt_osc_32k"; + #clock-cells = <0>; + }; + + can_osc_40m: can-clock { + compatible = "fixed-clock"; + clock-frequency = <40000000>; + clock-output-names = "can_osc_40m"; + #clock-cells = <0>; + }; + + fan { + compatible = "gpio-fan"; + gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; + gpio-fan,speed-map = <0 0 + 13000 1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fan>; + #cooling-cells = <2>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + led-0 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_DISK; + gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc2"; + }; + + led-1 { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_DISK; + gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + }; + + led-2 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_CPU; + gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + usdhc1_pwrseq: pwr-seq { + compatible = "mmc-pwrseq-simple"; + post-power-on-delay-ms = <100>; + power-off-delay-us = <60>; + reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; + }; + + reg_can_en: regulator-can-en { + compatible = "regulator-fixed"; + gpio = <&gpio1 9 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can_en>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "CAN_EN"; + startup-delay-us = <20>; + }; + + reg_usb_otg1_vbus: regulator-usb-otg1 { + compatible = "regulator-fixed"; + gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1pwrgrp>; + regulator-name = "usb_otg1_vbus"; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + off-on-delay-us = <20000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "VSD_3V3"; + }; + + reg_vcc_3v3: regulator-vcc-3v3 { + compatible = "regulator-fixed"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "VCC_3V3"; + }; +}; + +/* SPI - CAN MCP251XFD */ +&ecspi1 { + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + can0: can@0 { + compatible = "microchip,mcp251xfd"; + clocks = <&can_osc_40m>; + interrupt-parent = <&gpio1>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can_int>; + reg = <0>; + spi-max-frequency = <20000000>; + xceiver-supply = <®_can_en>; + }; +}; + +&gpio1 { + gpio-line-names = "nINT_ETHPHY", "LED_RED", "WDOG_INT", "X_RTC_INT", + "", "", "", "RESET_ETHPHY", + "CAN_nINT", "CAN_EN", "nENABLE_FLATLINK", "", + "USB_OTG_VBUS_EN", "", "LED_GREEN", "LED_BLUE"; +}; + +&gpio2 { + gpio-line-names = "", "", "", "", + "", "", "BT_REG_ON", "WL_REG_ON", + "BT_DEV_WAKE", "BT_HOST_WAKE", "", "", + "X_SD2_CD_B", "", "", "", + "", "", "", "SD2_RESET_B"; +}; + +&gpio4 { + gpio-line-names = "", "", "", "", + "", "", "", "", + "FAN", "miniPCIe_nPERST", "", "", + "COEX1", "COEX2"; +}; + +&gpio5 { + gpio-line-names = "", "", "", "", + "", "", "", "", + "", "ECSPI1_SS0"; +}; + +/* PCIe */ +&pcie0 { + assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, + <&clk IMX8MM_CLK_PCIE1_CTRL>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>, + <&clk IMX8MM_SYS_PLL2_250M>; + assigned-clock-rates = <10000000>, <250000000>; + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>, + <&clk IMX8MM_CLK_PCIE1_PHY>; + clock-names = "pcie", "pcie_aux", "pcie_bus"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio4 9 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pcie_phy { + clocks = <&clk IMX8MM_CLK_PCIE1_PHY>; + fsl,clkreq-unsupported; + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>; + fsl,tx-deemph-gen1 = <0x2d>; + fsl,tx-deemph-gen2 = <0xf>; + status = "okay"; +}; + +&rv3028 { + trickle-resistor-ohms = <3000>; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +/* UART - RS232/RS485 */ +&uart1 { + assigned-clocks = <&clk IMX8MM_CLK_UART1>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + uart-has-rtscts; + status = "okay"; +}; + +/* UART - Sterling-LWB Bluetooth */ +&uart2 { + assigned-clocks = <&clk IMX8MM_CLK_UART2>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>; + fsl,dte-mode; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_bt>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&bt_osc_32k>; + clock-names = "lpo"; + device-wakeup-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; + interrupt-names = "host-wakeup"; + interrupt-parent = <&gpio2>; + interrupts = <9 IRQ_TYPE_EDGE_BOTH>; + max-speed = <2000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_bt>; + shutdown-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>; + vddio-supply = <®_vcc_3v3>; + }; +}; + +/* UART - console */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +/* USB */ +&usbotg1 { + adp-disable; + dr_mode = "otg"; + over-current-active-low; + samsung,picophy-pre-emp-curr-control = <3>; + samsung,picophy-dc-vol-level-adjust = <7>; + srp-disable; + vbus-supply = <®_usb_otg1_vbus>; + status = "okay"; +}; + +&usbotg2 { + disable-over-current; + dr_mode = "host"; + samsung,picophy-pre-emp-curr-control = <3>; + samsung,picophy-dc-vol-level-adjust = <7>; + status = "okay"; +}; + +/* SDIO - Sterling-LWB Wifi */ +&usdhc1 { + assigned-clocks = <&clk IMX8MM_CLK_USDHC1>; + assigned-clock-rates = <200000000>; + bus-width = <4>; + mmc-pwrseq = <&usdhc1_pwrseq>; + non-removable; + no-1-8-v; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_wlan>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + }; +}; + +/* SD-Card */ +&usdhc2 { + assigned-clocks = <&clk IMX8MM_CLK_USDHC2>; + assigned-clock-rates = <200000000>; + bus-width = <4>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + disable-wp; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + vmmc-supply = <®_usdhc2_vmmc>; + vqmmc-supply = <®_nvcc_sd2>; + status = "okay"; +}; + +&iomuxc { + pinctrl_bt: btgrp { + fsl,pins = < + MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6 0x00 + MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8 0x00 + MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9 0x00 + >; + }; + + pinctrl_can_en: can-engrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x00 + >; + }; + + pinctrl_can_int: can-intgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x00 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x80 + MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x80 + MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x80 + MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x00 + >; + }; + + pinctrl_fan: fan0grp { + fsl,pins = < + MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x16 + >; + }; + + pinctrl_leds: leds1grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x16 + MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x16 + MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x16 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9 0x00 + MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12 0x12 + MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x12 + >; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x40 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x00 + MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B 0x00 + MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x00 + MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B 0x00 + >; + }; + + pinctrl_uart2_bt: uart2btgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_RXC_UART2_DTE_RTS_B 0x00 + MX8MM_IOMUXC_SAI3_RXD_UART2_DTE_CTS_B 0x00 + MX8MM_IOMUXC_SAI3_TXC_UART2_DTE_RX 0x00 + MX8MM_IOMUXC_SAI3_TXFS_UART2_DTE_TX 0x00 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x40 + MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x40 + >; + }; + + pinctrl_usbotg1pwrgrp: usbotg1pwrgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x00 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x182 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0xc6 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc6 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc6 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc6 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc6 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x40 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x192 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d2 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d2 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d2 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d2 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d2 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 + >; + }; + + pinctrl_wlan: wlangrp { + fsl,pins = < + MX8MM_IOMUXC_SD1_DATA5_GPIO2_IO7 0x00 + >; + }; +}; diff --git a/dts/src/arm64/freescale/imx8mm-phycore-som.dtsi b/dts/src/arm64/freescale/imx8mm-phycore-som.dtsi new file mode 100644 index 0000000000..995b44efb1 --- /dev/null +++ b/dts/src/arm64/freescale/imx8mm-phycore-som.dtsi @@ -0,0 +1,440 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2022 PHYTEC Messtechnik GmbH + * Author: Teresa Remmet <t.remmet@phytec.de> + */ + +#include "imx8mm.dtsi" +#include <dt-bindings/net/ti-dp83867.h> + +/ { + model = "PHYTEC phyCORE-i.MX8MM"; + compatible = "phytec,imx8mm-phycore-som", "fsl,imx8mm"; + + aliases { + rtc0 = &rv3028; + rtc1 = &snvs_rtc; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0x80000000>; + }; + + reg_vdd_3v3_s: regulator-vdd-3v3-s { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "VDD_3V3_S"; + }; +}; + +&A53_0 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_1 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_2 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_3 { + cpu-supply = <®_vdd_arm>; +}; + +&ddrc { + operating-points-v2 = <&ddrc_opp_table>; + + ddrc_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-25M { + opp-hz = /bits/ 64 <25000000>; + }; + + opp-100M { + opp-hz = /bits/ 64 <100000000>; + }; + + opp-750M { + opp-hz = /bits/ 64 <750000000>; + }; + }; +}; + +/* Ethernet */ +&fec1 { + fsl,magic-packet; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + enet-phy-lane-no-swap; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + reg = <0>; + reset-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + reset-assert-us = <1000>; + reset-deassert-us = <1000>; + }; + }; +}; + +/* SPI Flash */ +&flexspi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexspi0>; + status = "okay"; + + som_flash: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <80000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <1>; + }; +}; + +&gpio1 { + gpio-line-names = "nINT_ETHPHY", "", "WDOG_INT", "X_RTC_INT", + "", "", "", "RESET_ETHPHY", + "", "", "nENABLE_FLATLINK"; +}; + +/* I2C1 */ +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default","gpio"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + pmic@8 { + compatible = "nxp,pf8121a"; + reg = <0x08>; + + regulators { + reg_nvcc_sd1: ldo1 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "NVCC_SD1 (LDO1)"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + reg_nvcc_sd2: ldo2 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; + regulator-name = "NVCC_SD2 (LDO2)"; + vselect-en; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + reg_vcc_enet: ldo3 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <2500000>; + regulator-min-microvolt = <1500000>; + regulator-name = "VCC_ENET_2V5 (LDO3)"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + reg_vdda_1v8: ldo4 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1500000>; + regulator-name = "VDDA_1V8 (LDO4)"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-min-microvolt = <1500000>; + regulator-suspend-max-microvolt = <1500000>; + }; + }; + + reg_soc_vdda_phy: buck1 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <900000>; + regulator-min-microvolt = <400000>; + regulator-name = "VDD_SOC_VDDA_PHY_0P8 (BUCK1)"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-min-microvolt = <400000>; + regulator-suspend-max-microvolt = <400000>; + }; + }; + + reg_vdd_gpu_dram: buck2 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1000000>; + regulator-min-microvolt = <1000000>; + regulator-name = "VDD_GPU_DRAM (BUCK2)"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-max-microvolt = <1000000>; + regulator-suspend-min-microvolt = <1000000>; + }; + }; + + reg_vdd_gpu: buck3 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1000000>; + regulator-min-microvolt = <400000>; + regulator-name = "VDD_VPU (BUCK3)"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + reg_vdd_mipi: buck4 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1050000>; + regulator-min-microvolt = <900000>; + regulator-name = "VDD_MIPI_0P9 (BUCK4)"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + reg_vdd_arm: buck5 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1050000>; + regulator-min-microvolt = <400000>; + regulator-name = "VDD_ARM (BUCK5)"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + reg_vdd_1v8: buck6 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "VDD_1V8 (BUCK6)"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-max-microvolt = <1800000>; + regulator-suspend-min-microvolt = <1800000>; + }; + }; + + reg_nvcc_dram: buck7 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1100000>; + regulator-min-microvolt = <1100000>; + regulator-name = "NVCC_DRAM_1P1V (BUCK7)"; + }; + + reg_vsnvs: vsnvs { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "NVCC_SNVS_1P8 (VSNVS)"; + }; + }; + }; + + sn65dsi83: bridge@2d { + compatible = "ti,sn65dsi83"; + enable-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sn65dsi83>; + reg = <0x2d>; + status = "disabled"; + }; + + eeprom@51 { + compatible = "atmel,24c32"; + pagesize = <32>; + reg = <0x51>; + vcc-supply = <®_vdd_3v3_s>; + }; + + rv3028: rtc@52 { + compatible = "microcrystal,rv3028"; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&gpio1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + reg = <0x52>; + }; +}; + +/* EMMC */ +&usdhc3 { + assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>; + assigned-clock-rates = <400000000>; + bus-width = <8>; + keep-power-in-suspend; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + non-removable; + status = "okay"; +}; + +/* Watchdog */ +&wdog1 { + fsl,ext-reset-output; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + status = "okay"; +}; + +&iomuxc { + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x2 + MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x2 + MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x90 + MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x90 + MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x90 + MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x90 + MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x90 + MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x90 + MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x16 + MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x16 + MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x16 + MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x16 + MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x16 + MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x16 + MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x10 + >; + }; + + pinctrl_flexspi0: flexspi0grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x1c2 + MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82 + MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82 + MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82 + MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82 + MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c0 + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c0 + >; + }; + + pinctrl_i2c1_gpio: i2c1gpiogrp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15 0x1e0 + MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14 0x1e0 + >; + }; + + pinctrl_rtc: rtcgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x1c0 + >; + }; + + pinctrl_sn65dsi83: sn65dsi83grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x0 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x26 + >; + }; +}; diff --git a/dts/src/arm64/freescale/imx8mm-var-som-symphony.dts b/dts/src/arm64/freescale/imx8mm-var-som-symphony.dts index ac1fe1530a..d643381417 100644 --- a/dts/src/arm64/freescale/imx8mm-var-som-symphony.dts +++ b/dts/src/arm64/freescale/imx8mm-var-som-symphony.dts @@ -36,19 +36,19 @@ gpio-keys { compatible = "gpio-keys"; - back { + key-back { label = "Back"; gpios = <&pca9534 1 GPIO_ACTIVE_LOW>; linux,code = <KEY_BACK>; }; - home { + key-home { label = "Home"; gpios = <&pca9534 2 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOME>; }; - menu { + key-menu { label = "Menu"; gpios = <&pca9534 3 GPIO_ACTIVE_LOW>; linux,code = <KEY_MENU>; diff --git a/dts/src/arm64/freescale/imx8mm-venice-gw700x.dtsi b/dts/src/arm64/freescale/imx8mm-venice-gw700x.dtsi index 00f86cada3..66a0d103c9 100644 --- a/dts/src/arm64/freescale/imx8mm-venice-gw700x.dtsi +++ b/dts/src/arm64/freescale/imx8mm-venice-gw700x.dtsi @@ -16,13 +16,13 @@ gpio-keys { compatible = "gpio-keys"; - user-pb { + key-user-pb { label = "user_pb"; gpios = <&gpio 2 GPIO_ACTIVE_LOW>; linux,code = <BTN_0>; }; - user-pb1x { + key-user-pb1x { label = "user_pb1x"; linux,code = <BTN_1>; interrupt-parent = <&gsc>; @@ -36,14 +36,14 @@ interrupts = <1>; }; - eeprom-wp { + key-eeprom-wp { label = "eeprom_wp"; linux,code = <BTN_3>; interrupt-parent = <&gsc>; interrupts = <2>; }; - tamper { + key-tamper { label = "tamper"; linux,code = <BTN_4>; interrupt-parent = <&gsc>; @@ -286,8 +286,8 @@ regulator-name = "buck1"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1000000>; - regulator-min-microamp = <3800000>; - regulator-max-microamp = <6800000>; + regulator-min-microamp = <3800000>; + regulator-max-microamp = <6800000>; regulator-boot-on; regulator-always-on; }; @@ -297,8 +297,8 @@ regulator-name = "buck2"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <900000>; - regulator-min-microamp = <2200000>; - regulator-max-microamp = <5200000>; + regulator-min-microamp = <2200000>; + regulator-max-microamp = <5200000>; regulator-boot-on; regulator-always-on; }; @@ -308,8 +308,8 @@ regulator-name = "buck3"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1000000>; - regulator-min-microamp = <3800000>; - regulator-max-microamp = <6800000>; + regulator-min-microamp = <3800000>; + regulator-max-microamp = <6800000>; regulator-always-on; }; @@ -318,8 +318,8 @@ regulator-name = "buck4"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-min-microamp = <2200000>; - regulator-max-microamp = <5200000>; + regulator-min-microamp = <2200000>; + regulator-max-microamp = <5200000>; regulator-boot-on; regulator-always-on; }; diff --git a/dts/src/arm64/freescale/imx8mm-venice-gw7901.dts b/dts/src/arm64/freescale/imx8mm-venice-gw7901.dts index 24737e8903..35fb929e7b 100644 --- a/dts/src/arm64/freescale/imx8mm-venice-gw7901.dts +++ b/dts/src/arm64/freescale/imx8mm-venice-gw7901.dts @@ -38,13 +38,13 @@ gpio-keys { compatible = "gpio-keys"; - user-pb { + key-user-pb { label = "user_pb"; gpios = <&gpio 2 GPIO_ACTIVE_LOW>; linux,code = <BTN_0>; }; - user-pb1x { + key-user-pb1x { label = "user_pb1x"; linux,code = <BTN_1>; interrupt-parent = <&gsc>; @@ -58,14 +58,14 @@ interrupts = <1>; }; - eeprom-wp { + key-eeprom-wp { label = "eeprom_wp"; linux,code = <BTN_3>; interrupt-parent = <&gsc>; interrupts = <2>; }; - tamper { + key-tamper { label = "tamper"; linux,code = <BTN_4>; interrupt-parent = <&gsc>; diff --git a/dts/src/arm64/freescale/imx8mm-venice-gw7902.dts b/dts/src/arm64/freescale/imx8mm-venice-gw7902.dts index 407ab4592b..6dc5eda2d2 100644 --- a/dts/src/arm64/freescale/imx8mm-venice-gw7902.dts +++ b/dts/src/arm64/freescale/imx8mm-venice-gw7902.dts @@ -42,13 +42,13 @@ gpio-keys { compatible = "gpio-keys"; - user-pb { + key-user-pb { label = "user_pb"; gpios = <&gpio 2 GPIO_ACTIVE_LOW>; linux,code = <BTN_0>; }; - user-pb1x { + key-user-pb1x { label = "user_pb1x"; linux,code = <BTN_1>; interrupt-parent = <&gsc>; @@ -62,14 +62,14 @@ interrupts = <1>; }; - eeprom-wp { + key-eeprom-wp { label = "eeprom_wp"; linux,code = <BTN_3>; interrupt-parent = <&gsc>; interrupts = <2>; }; - tamper { + key-tamper { label = "tamper"; linux,code = <BTN_4>; interrupt-parent = <&gsc>; @@ -651,7 +651,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>; rts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; - cts-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; + cts-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; uart-has-rtscts; status = "okay"; }; diff --git a/dts/src/arm64/freescale/imx8mm-venice-gw7903.dts b/dts/src/arm64/freescale/imx8mm-venice-gw7903.dts index a7dae9bd4c..a65761a53f 100644 --- a/dts/src/arm64/freescale/imx8mm-venice-gw7903.dts +++ b/dts/src/arm64/freescale/imx8mm-venice-gw7903.dts @@ -33,13 +33,13 @@ gpio-keys { compatible = "gpio-keys"; - user-pb { + key-user-pb { label = "user_pb"; gpios = <&gpio 2 GPIO_ACTIVE_LOW>; linux,code = <BTN_0>; }; - user-pb1x { + key-user-pb1x { label = "user_pb1x"; linux,code = <BTN_1>; interrupt-parent = <&gsc>; @@ -53,7 +53,7 @@ interrupts = <1>; }; - eeprom-wp { + key-eeprom-wp { label = "eeprom_wp"; linux,code = <BTN_3>; interrupt-parent = <&gsc>; diff --git a/dts/src/arm64/freescale/imx8mm-verdin.dtsi b/dts/src/arm64/freescale/imx8mm-verdin.dtsi index eafa88d980..d1b4582f44 100644 --- a/dts/src/arm64/freescale/imx8mm-verdin.dtsi +++ b/dts/src/arm64/freescale/imx8mm-verdin.dtsi @@ -43,7 +43,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; - wakeup { + key-wakeup { debounce-interval = <10>; /* Verdin CTRL_WAKE1_MICO# (SODIMM 252) */ gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; @@ -154,6 +154,14 @@ cpu-supply = <®_vdd_arm>; }; +&cpu_alert0 { + temperature = <95000>; +}; + +&cpu_crit0 { + temperature = <105000>; +}; + &ddrc { operating-points-v2 = <&ddrc_opp_table>; diff --git a/dts/src/arm64/freescale/imx8mm.dtsi b/dts/src/arm64/freescale/imx8mm.dtsi index 1bf0704738..afb90f59c8 100644 --- a/dts/src/arm64/freescale/imx8mm.dtsi +++ b/dts/src/arm64/freescale/imx8mm.dtsi @@ -212,7 +212,7 @@ clk_ext4: clock-ext4 { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency= <133000000>; + clock-frequency = <133000000>; clock-output-names = "clk_ext4"; }; @@ -287,7 +287,7 @@ clock-names = "main_clk"; }; - soc@0 { + soc: soc@0 { compatible = "fsl,imx8mm-soc", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -602,6 +602,11 @@ wakeup-source; status = "disabled"; }; + + snvs_lpgpr: snvs-lpgpr { + compatible = "fsl,imx8mm-snvs-lpgpr", + "fsl,imx7d-snvs-lpgpr"; + }; }; clk: clock-controller@30380000 { @@ -911,6 +916,7 @@ compatible = "fsl,sec-v4.0-job-ring"; reg = <0x1000 0x1000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; }; sec_jr1: jr@2000 { @@ -995,7 +1001,7 @@ <&clk IMX8MM_CLK_USDHC1_ROOT>; clock-names = "ipg", "ahb", "per"; fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; bus-width = <4>; status = "disabled"; }; @@ -1009,7 +1015,7 @@ <&clk IMX8MM_CLK_USDHC2_ROOT>; clock-names = "ipg", "ahb", "per"; fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; bus-width = <4>; status = "disabled"; }; @@ -1023,7 +1029,7 @@ <&clk IMX8MM_CLK_USDHC3_ROOT>; clock-names = "ipg", "ahb", "per"; fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; bus-width = <4>; status = "disabled"; }; diff --git a/dts/src/arm64/freescale/imx8mn-beacon-baseboard.dtsi b/dts/src/arm64/freescale/imx8mn-beacon-baseboard.dtsi index 02f37dcda7..9e82069c94 100644 --- a/dts/src/arm64/freescale/imx8mn-beacon-baseboard.dtsi +++ b/dts/src/arm64/freescale/imx8mn-beacon-baseboard.dtsi @@ -146,7 +146,7 @@ }; &easrc { - fsl,asrc-rate = <48000>; + fsl,asrc-rate = <48000>; status = "okay"; }; @@ -182,7 +182,7 @@ &usbotg1 { vbus-supply = <®_usb_otg_vbus>; disable-over-current; - dr_mode="otg"; + dr_mode = "otg"; status = "okay"; }; diff --git a/dts/src/arm64/freescale/imx8mn-evk.dtsi b/dts/src/arm64/freescale/imx8mn-evk.dtsi index d1f6cccfa0..261c365400 100644 --- a/dts/src/arm64/freescale/imx8mn-evk.dtsi +++ b/dts/src/arm64/freescale/imx8mn-evk.dtsi @@ -47,6 +47,11 @@ linux,autosuspend-period = <125>; }; + audio_codec_bt_sco: audio-codec-bt-sco { + compatible = "linux,bt-sco"; + #sound-dai-cells = <1>; + }; + wm8524: audio-codec { #sound-dai-cells = <0>; compatible = "wlf,wm8524"; @@ -57,6 +62,25 @@ clock-names = "mclk"; }; + sound-bt-sco { + compatible = "simple-audio-card"; + simple-audio-card,name = "bt-sco-audio"; + simple-audio-card,format = "dsp_a"; + simple-audio-card,bitclock-inversion; + simple-audio-card,frame-master = <&btcpu>; + simple-audio-card,bitclock-master = <&btcpu>; + + btcpu: simple-audio-card,cpu { + sound-dai = <&sai2>; + dai-tdm-slot-num = <2>; + dai-tdm-slot-width = <16>; + }; + + simple-audio-card,codec { + sound-dai = <&audio_codec_bt_sco 1>; + }; + }; + sound-wm8524 { compatible = "fsl,imx-audio-wm8524"; model = "wm8524-audio"; @@ -78,7 +102,7 @@ }; &easrc { - fsl,asrc-rate = <48000>; + fsl,asrc-rate = <48000>; status = "okay"; }; @@ -183,6 +207,16 @@ }; }; +&sai2 { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2>; + assigned-clocks = <&clk IMX8MN_CLK_SAI2>; + assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + status = "okay"; +}; + &sai3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sai3>; @@ -354,6 +388,15 @@ >; }; + pinctrl_sai2: sai2grp { + fsl,pins = < + MX8MN_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6 + MX8MN_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6 + MX8MN_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6 + MX8MN_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0xd6 + >; + }; + pinctrl_sai3: sai3grp { fsl,pins = < MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6 diff --git a/dts/src/arm64/freescale/imx8mn-var-som-symphony.dts b/dts/src/arm64/freescale/imx8mn-var-som-symphony.dts index f61c48776c..3ed7021a48 100644 --- a/dts/src/arm64/freescale/imx8mn-var-som-symphony.dts +++ b/dts/src/arm64/freescale/imx8mn-var-som-symphony.dts @@ -26,19 +26,19 @@ gpio-keys { compatible = "gpio-keys"; - back { + key-back { label = "Back"; gpios = <&pca9534 1 GPIO_ACTIVE_LOW>; linux,code = <KEY_BACK>; }; - home { + key-home { label = "Home"; gpios = <&pca9534 2 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOME>; }; - menu { + key-menu { label = "Menu"; gpios = <&pca9534 3 GPIO_ACTIVE_LOW>; linux,code = <KEY_MENU>; diff --git a/dts/src/arm64/freescale/imx8mn-venice-gw7902.dts b/dts/src/arm64/freescale/imx8mn-venice-gw7902.dts index 367a232675..636f8602b9 100644 --- a/dts/src/arm64/freescale/imx8mn-venice-gw7902.dts +++ b/dts/src/arm64/freescale/imx8mn-venice-gw7902.dts @@ -39,13 +39,13 @@ gpio-keys { compatible = "gpio-keys"; - user-pb { + key-user-pb { label = "user_pb"; gpios = <&gpio 2 GPIO_ACTIVE_LOW>; linux,code = <BTN_0>; }; - user-pb1x { + key-user-pb1x { label = "user_pb1x"; linux,code = <BTN_1>; interrupt-parent = <&gsc>; @@ -59,14 +59,14 @@ interrupts = <1>; }; - eeprom-wp { + key-eeprom-wp { label = "eeprom_wp"; linux,code = <BTN_3>; interrupt-parent = <&gsc>; interrupts = <2>; }; - tamper { + key-tamper { label = "tamper"; linux,code = <BTN_4>; interrupt-parent = <&gsc>; diff --git a/dts/src/arm64/freescale/imx8mn.dtsi b/dts/src/arm64/freescale/imx8mn.dtsi index e41e1d56f9..0c71b740a3 100644 --- a/dts/src/arm64/freescale/imx8mn.dtsi +++ b/dts/src/arm64/freescale/imx8mn.dtsi @@ -212,7 +212,7 @@ clk_ext4: clock-ext4 { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency= <133000000>; + clock-frequency = <133000000>; clock-output-names = "clk_ext4"; }; @@ -269,7 +269,7 @@ arm,no-tick-in-suspend; }; - soc@0 { + soc: soc@0 { compatible = "fsl,imx8mn-soc", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -422,7 +422,7 @@ "ctx2_rx", "ctx2_tx", "ctx3_rx", "ctx3_tx"; firmware-name = "imx/easrc/easrc-imx8mn.bin"; - fsl,asrc-rate = <8000>; + fsl,asrc-rate = <8000>; fsl,asrc-format = <2>; status = "disabled"; }; @@ -857,6 +857,7 @@ compatible = "fsl,sec-v4.0-job-ring"; reg = <0x1000 0x1000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; }; sec_jr1: jr@2000 { @@ -941,7 +942,7 @@ <&clk IMX8MN_CLK_USDHC1_ROOT>; clock-names = "ipg", "ahb", "per"; fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; bus-width = <4>; status = "disabled"; }; @@ -955,7 +956,7 @@ <&clk IMX8MN_CLK_USDHC2_ROOT>; clock-names = "ipg", "ahb", "per"; fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; bus-width = <4>; status = "disabled"; }; @@ -969,7 +970,7 @@ <&clk IMX8MN_CLK_USDHC3_ROOT>; clock-names = "ipg", "ahb", "per"; fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; bus-width = <4>; status = "disabled"; }; diff --git a/dts/src/arm64/freescale/imx8mp-dhcom-pdk2.dts b/dts/src/arm64/freescale/imx8mp-dhcom-pdk2.dts new file mode 100644 index 0000000000..2ca2ede2e9 --- /dev/null +++ b/dts/src/arm64/freescale/imx8mp-dhcom-pdk2.dts @@ -0,0 +1,163 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2022 Marek Vasut <marex@denx.de> + */ + +/dts-v1/; + +#include <dt-bindings/leds/common.h> +#include <dt-bindings/net/qca-ar803x.h> +#include <dt-bindings/phy/phy-imx8-pcie.h> +#include "imx8mp-dhcom-som.dtsi" + +/ { + model = "DH electronics i.MX8M Plus DHCOM Premium Developer Kit (2)"; + compatible = "dh,imx8mp-dhcom-pdk2", "fsl,imx8mp"; + + chosen { + stdout-path = &uart1; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-0 { + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; /* GPIO A */ + label = "TA1-GPIO-A"; + linux,code = <KEY_A>; + pinctrl-0 = <&pinctrl_dhcom_a>; + pinctrl-names = "default"; + wakeup-source; + }; + + button-1 { + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; /* GPIO B */ + label = "TA2-GPIO-B"; + linux,code = <KEY_B>; + pinctrl-0 = <&pinctrl_dhcom_b>; + pinctrl-names = "default"; + wakeup-source; + }; + + button-2 { + gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; /* GPIO C */ + label = "TA3-GPIO-C"; + linux,code = <KEY_C>; + pinctrl-0 = <&pinctrl_dhcom_c>; + pinctrl-names = "default"; + wakeup-source; + }; + + button-3 { + gpios = <&gpio4 27 GPIO_ACTIVE_LOW>; /* GPIO D */ + label = "TA4-GPIO-D"; + linux,code = <KEY_D>; + pinctrl-0 = <&pinctrl_dhcom_d>; + pinctrl-names = "default"; + wakeup-source; + }; + }; + + led { + compatible = "gpio-leds"; + + led-0 { + color = <LED_COLOR_ID_GREEN>; + default-state = "off"; + function = LED_FUNCTION_INDICATOR; + gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* GPIO E */ + pinctrl-0 = <&pinctrl_dhcom_e>; + pinctrl-names = "default"; + }; + + led-1 { + color = <LED_COLOR_ID_GREEN>; + default-state = "off"; + function = LED_FUNCTION_INDICATOR; + gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* GPIO F */ + pinctrl-0 = <&pinctrl_dhcom_f>; + pinctrl-names = "default"; + }; + + led-2 { + color = <LED_COLOR_ID_GREEN>; + default-state = "off"; + function = LED_FUNCTION_INDICATOR; + gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; /* GPIO H */ + pinctrl-0 = <&pinctrl_dhcom_h>; + pinctrl-names = "default"; + }; + + led-3 { + color = <LED_COLOR_ID_GREEN>; + default-state = "off"; + function = LED_FUNCTION_INDICATOR; + gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; /* GPIO I */ + pinctrl-0 = <&pinctrl_dhcom_i>; + pinctrl-names = "default"; + }; + }; +}; + +/* + * PDK2 carrier board uses SoM with KSZ9131 populated and connected to + * SoM EQoS ethernet RGMII interface. Remove the other SoM PHY DT node. + */ +/delete-node/ ðphy0f; + +/* + * PDK2 carrier board has KSZ9021 PHY populated and connected to SoM FEC + * ethernet RGMII interface. The SoM is not populated with second FEC PHY. + */ +/delete-node/ ðphy1f; + +&fec { /* Second ethernet */ + phy-handle = <ðphypdk>; + + mdio { + ethphypdk: ethernet-phy@7 { /* KSZ 9021 */ + compatible = "ethernet-phy-ieee802.3-c22"; + pinctrl-0 = <&pinctrl_ethphy1>; + pinctrl-names = "default"; + interrupt-parent = <&gpio4>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + max-speed = <100>; + reg = <7>; + reset-assert-us = <1000>; + reset-deassert-us = <1000>; + reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; + rxc-skew-ps = <3000>; + rxd0-skew-ps = <0>; + rxd1-skew-ps = <0>; + rxd2-skew-ps = <0>; + rxd3-skew-ps = <0>; + rxdv-skew-ps = <0>; + txc-skew-ps = <3000>; + txd0-skew-ps = <0>; + txd1-skew-ps = <0>; + txd2-skew-ps = <0>; + txd3-skew-ps = <0>; + txen-skew-ps = <0>; + }; + }; +}; + +&flexcan1 { + status = "okay"; +}; + +&usb3_1 { + fsl,over-current-active-low; +}; + +&iomuxc { + /* + * GPIO_A,B,C,D are connected to buttons. + * GPIO_E,F,H,I are connected to LEDs. + * GPIO_M is connected to CLKOUT2. + */ + pinctrl-0 = <&pinctrl_hog_base + &pinctrl_dhcom_g &pinctrl_dhcom_j + &pinctrl_dhcom_k &pinctrl_dhcom_l + &pinctrl_dhcom_int>; +}; diff --git a/dts/src/arm64/freescale/imx8mp-dhcom-som.dtsi b/dts/src/arm64/freescale/imx8mp-dhcom-som.dtsi new file mode 100644 index 0000000000..a616eb3780 --- /dev/null +++ b/dts/src/arm64/freescale/imx8mp-dhcom-som.dtsi @@ -0,0 +1,1030 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2021-2022 Marek Vasut <marex@denx.de> + */ + +#include "imx8mp.dtsi" + +/ { + model = "DH electronics i.MX8M Plus DHCOM SoM"; + compatible = "dh,imx8mp-dhcom-som", "fsl,imx8mp"; + + aliases { + ethernet0 = &eqos; + ethernet1 = &fec; + rtc0 = &rv3032; + rtc1 = &snvs_rtc; + spi0 = &flexspi; + }; + + memory@40000000 { + device_type = "memory"; + /* Memory size 512 MiB..8 GiB will be filled by U-Boot */ + reg = <0x0 0x40000000 0 0x08000000>; + }; + + reg_eth_vio: regulator-eth-vio { + compatible = "regulator-fixed"; + gpio = <&gpio2 10 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&pinctrl_enet_vio>; + pinctrl-names = "default"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "eth_vio"; + vin-supply = <&buck4>; + }; + + reg_usdhc2_vmmc: regulator-usdhc2-vmmc { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 19 0>; /* SD2_RESET */ + off-on-delay-us = <12000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2_vmmc>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "VDD_3V3_SD"; + startup-delay-us = <100>; + vin-supply = <&buck4>; + }; +}; + +&A53_0 { + cpu-supply = <&buck2>; +}; + +&A53_1 { + cpu-supply = <&buck2>; +}; + +&A53_2 { + cpu-supply = <&buck2>; +}; + +&A53_3 { + cpu-supply = <&buck2>; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + status = "disabled"; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + status = "disabled"; +}; + +&eqos { /* First ethernet */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eqos>; + phy-handle = <ðphy0g>; + phy-mode = "rgmii-id"; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + /* Up to one of these two PHYs may be populated. */ + ethphy0f: ethernet-phy@1 { /* SMSC LAN8740Ai */ + compatible = "ethernet-phy-id0007.c110", + "ethernet-phy-ieee802.3-c22"; + interrupt-parent = <&gpio3>; + interrupts = <19 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&pinctrl_ethphy0>; + pinctrl-names = "default"; + reg = <1>; + reset-assert-us = <1000>; + reset-deassert-us = <1000>; + reset-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>; + /* Non-default PHY population option. */ + status = "disabled"; + }; + + ethphy0g: ethernet-phy@5 { /* Micrel KSZ9131RNXI */ + compatible = "ethernet-phy-id0022.1642", + "ethernet-phy-ieee802.3-c22"; + interrupt-parent = <&gpio3>; + interrupts = <19 IRQ_TYPE_LEVEL_LOW>; + micrel,led-mode = <0>; + pinctrl-0 = <&pinctrl_ethphy0>; + pinctrl-names = "default"; + reg = <5>; + reset-assert-us = <1000>; + reset-deassert-us = <1000>; + reset-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>; + /* Default PHY population option. */ + status = "okay"; + }; + }; +}; + +&fec { /* Second ethernet */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-handle = <ðphy1f>; + phy-mode = "rgmii"; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + /* Up to one PHY may be populated. */ + ethphy1f: ethernet-phy@1 { /* SMSC LAN8740Ai */ + compatible = "ethernet-phy-id0007.c110", + "ethernet-phy-ieee802.3-c22"; + interrupt-parent = <&gpio4>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&pinctrl_ethphy1>; + pinctrl-names = "default"; + reg = <1>; + reset-assert-us = <1000>; + reset-deassert-us = <1000>; + reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; + /* Non-default PHY population option. */ + status = "disabled"; + }; + }; +}; + +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "disabled"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "disabled"; +}; + +&flexspi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexspi>; + status = "okay"; + + flash@0 { /* W25Q128JWPIM */ + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <80000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + }; +}; + +&gpio1 { + gpio-line-names = + "DHCOM-G", "", "", "", "", "DHCOM-I", "DHCOM-J", "DHCOM-L", + "DHCOM-B", "DHCOM-A", "", "DHCOM-H", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio2 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "DHCOM-K", "", "", "", "", + "", "", "", "", "DHCOM-INT", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio3 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "SOM-HW0", "", + "", "", "", "", "", "", "SOM-MEM0", "SOM-MEM1", + "SOM-MEM2", "SOM-HW2", "", "", "", "", "", ""; +}; + +&gpio4 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "SOM-HW1", "", "", "", "", + "", "", "", "DHCOM-D", "", "", "", ""; +}; + +&gpio5 { + gpio-line-names = + "", "", "DHCOM-C", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "DHCOM-E", "DHCOM-F", + "", "", "", "", "", "", "", ""; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c3>; + pinctrl-1 = <&pinctrl_i2c3_gpio>; + scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + pmic: pmic@25 { + compatible = "nxp,pca9450c"; + reg = <0x25>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; + + /* + * i.MX 8M Plus Data Sheet for Consumer Products + * 3.1.4 Operating ranges + * MIMX8ML8CVNKZAB + */ + regulators { + buck1: BUCK1 { /* VDD_SOC (dual-phase with BUCK3) */ + regulator-compatible = "BUCK1"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1000000>; + regulator-ramp-delay = <3125>; + regulator-always-on; + regulator-boot-on; + }; + + buck2: BUCK2 { /* VDD_ARM */ + regulator-compatible = "BUCK2"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1000000>; + regulator-ramp-delay = <3125>; + regulator-always-on; + regulator-boot-on; + }; + + buck4: BUCK4 { /* VDD_3V3 */ + regulator-compatible = "BUCK4"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + buck5: BUCK5 { /* VDD_1V8 */ + regulator-compatible = "BUCK5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + buck6: BUCK6 { /* NVCC_DRAM_1V1 */ + regulator-compatible = "BUCK6"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo1: LDO1 { /* NVCC_SNVS_1V8 */ + regulator-compatible = "LDO1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo3: LDO3 { /* VDDA_1V8 */ + regulator-compatible = "LDO3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo4: LDO4 { /* PMIC_LDO4 */ + regulator-compatible = "LDO4"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo5: LDO5 { /* NVCC_SD2 */ + regulator-compatible = "LDO5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; + + adc@48 { + compatible = "ti,tla2024"; + reg = <0x48>; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { /* Voltage over AIN0 and AIN1. */ + reg = <0>; + }; + + channel@1 { /* Voltage over AIN0 and AIN3. */ + reg = <1>; + }; + + channel@2 { /* Voltage over AIN1 and AIN3. */ + reg = <2>; + }; + + channel@3 { /* Voltage over AIN2 and AIN3. */ + reg = <3>; + }; + + channel@4 { /* Voltage over AIN0 and GND. */ + reg = <4>; + }; + + channel@5 { /* Voltage over AIN1 and GND. */ + reg = <5>; + }; + + channel@6 { /* Voltage over AIN2 and GND. */ + reg = <6>; + }; + + channel@7 { /* Voltage over AIN3 and GND. */ + reg = <7>; + }; + }; + + touchscreen@49 { + compatible = "ti,tsc2004"; + reg = <0x49>; + interrupts-extended = <&gpio4 0 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touch>; + vio-supply = <&buck4>; + }; + + eeprom0: eeprom@50 { /* EEPROM with EQoS MAC address */ + compatible = "atmel,24c02"; + pagesize = <16>; + reg = <0x50>; + }; + + rv3032: rtc@51 { + compatible = "microcrystal,rv3032"; + reg = <0x51>; + interrupts-extended = <&gpio5 5 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + }; + + eeprom1: eeprom@53 { /* EEPROM with FEC MAC address */ + compatible = "atmel,24c02"; + pagesize = <16>; + reg = <0x53>; + }; +}; + +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c4>; + pinctrl-1 = <&pinctrl_i2c4_gpio>; + scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + +&i2c5 { /* HDMI EDID bus */ + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c5>; + pinctrl-1 = <&pinctrl_i2c5_gpio>; + scl-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + +&pwm1 { + pinctrl-0 = <&pinctrl_pwm1>; + pinctrl-names = "default"; + status = "disabled"; +}; + +&uart1 { + /* CA53 console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + /* Bluetooth */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + uart-has-rtscts; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + uart-has-rtscts; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usb3_phy0 { + status = "okay"; +}; + +&usb3_0 { + status = "okay"; +}; + +&usb_dwc3_0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_vbus>; + dr_mode = "otg"; + status = "okay"; +}; + +&usb3_phy1 { + status = "okay"; +}; + +&usb3_1 { + status = "okay"; +}; + +&usb_dwc3_1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1_vbus>; + dr_mode = "host"; + status = "okay"; +}; + +/* SDIO WiFi */ +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + vmmc-supply = <&buck4>; + bus-width = <4>; + non-removable; + cap-power-off-card; + keep-power-in-suspend; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + brcmf: bcrmf@1 { /* muRata 2AE */ + reg = <1>; + compatible = "cypress,cyw4373-fmac", "brcm,bcm4329-fmac"; + /* + * The "host-wake" interrupt output is by default not + * connected to the SoC, but can be connected on to + * SoC pin on the carrier board. + */ + reset-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + }; +}; + +/* SD slot */ +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_usdhc2_vmmc>; + bus-width = <4>; + status = "okay"; +}; + +/* eMMC */ +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + vmmc-supply = <&buck4>; + vqmmc-supply = <&buck5>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl-0 = <&pinctrl_hog_base + &pinctrl_dhcom_a &pinctrl_dhcom_b &pinctrl_dhcom_c + &pinctrl_dhcom_d &pinctrl_dhcom_e &pinctrl_dhcom_f + &pinctrl_dhcom_g &pinctrl_dhcom_h &pinctrl_dhcom_i + &pinctrl_dhcom_j &pinctrl_dhcom_k &pinctrl_dhcom_l + /* GPIO_M is connected to CLKOUT2 */ + &pinctrl_dhcom_int>; + pinctrl-names = "default"; + + pinctrl_dhcom_a: dhcom-a-grp { + fsl,pins = < + /* ENET_QOS_EVENT0-OUT */ + MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09 0x2 + >; + }; + + pinctrl_dhcom_b: dhcom-b-grp { + fsl,pins = < + /* ENET_QOS_EVENT0-IN */ + MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08 0x2 + >; + }; + + pinctrl_dhcom_c: dhcom-c-grp { + fsl,pins = < + /* GPIO_C */ + MX8MP_IOMUXC_SAI3_MCLK__GPIO5_IO02 0x2 + >; + }; + + pinctrl_dhcom_d: dhcom-d-grp { + fsl,pins = < + /* GPIO_D */ + MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27 0x2 + >; + }; + + pinctrl_dhcom_e: dhcom-e-grp { + fsl,pins = < + /* GPIO_E */ + MX8MP_IOMUXC_UART1_RXD__GPIO5_IO22 0x2 + >; + }; + + pinctrl_dhcom_f: dhcom-f-grp { + fsl,pins = < + /* GPIO_F */ + MX8MP_IOMUXC_UART1_TXD__GPIO5_IO23 0x2 + >; + }; + + pinctrl_dhcom_g: dhcom-g-grp { + fsl,pins = < + /* GPIO_G */ + MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00 0x2 + >; + }; + + pinctrl_dhcom_h: dhcom-h-grp { + fsl,pins = < + /* GPIO_H */ + MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x2 + >; + }; + + pinctrl_dhcom_i: dhcom-i-grp { + fsl,pins = < + /* CSI1_SYNC */ + MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05 0x2 + >; + }; + + pinctrl_dhcom_j: dhcom-j-grp { + fsl,pins = < + /* CSIx_#RST */ + MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x2 + >; + }; + + pinctrl_dhcom_k: dhcom-k-grp { + fsl,pins = < + /* CSIx_PWDN */ + MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11 0x2 + >; + }; + + pinctrl_dhcom_l: dhcom-l-grp { + fsl,pins = < + /* CSI2_SYNC */ + MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 0x2 + >; + }; + + pinctrl_dhcom_int: dhcom-int-grp { + fsl,pins = < + /* INT_HIGHEST_PRIO */ + MX8MP_IOMUXC_SD2_WP__GPIO2_IO20 0x2 + >; + }; + + pinctrl_hog_base: dhcom-hog-base-grp { + fsl,pins = < + /* GPIOs for memory coding */ + MX8MP_IOMUXC_SAI5_RXD1__GPIO3_IO22 0x40000080 + MX8MP_IOMUXC_SAI5_RXD2__GPIO3_IO23 0x40000080 + MX8MP_IOMUXC_SAI5_RXD3__GPIO3_IO24 0x40000080 + /* GPIOs for hardware coding */ + MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14 0x40000080 + MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19 0x40000080 + MX8MP_IOMUXC_SAI5_MCLK__GPIO3_IO25 0x40000080 + >; + }; + + pinctrl_ecspi1: dhcom-ecspi1-grp { + fsl,pins = < + MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK 0x44 + MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI 0x44 + MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO 0x44 + MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09 0x40 + >; + }; + + pinctrl_ecspi2: dhcom-ecspi2-grp { + fsl,pins = < + MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x44 + MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x44 + MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x44 + MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x40 + >; + }; + + pinctrl_eqos: dhcom-eqos-grp { /* RGMII */ + fsl,pins = < + MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3 + MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3 + MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f + MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f + MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f + MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f + MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f + MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f + MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91 + MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91 + MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91 + MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91 + MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91 + MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91 + >; + }; + + pinctrl_enet_vio: dhcom-enet-vio-grp { + fsl,pins = < + MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10 0x22 + >; + }; + + pinctrl_ethphy0: dhcom-ethphy0-grp { + fsl,pins = < + /* ENET1_#RST Reset */ + MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20 0x22 + /* ENET1_#INT Interrupt */ + MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19 0x22 + >; + }; + + pinctrl_ethphy1: dhcom-ethphy1-grp { + fsl,pins = < + /* ENET1_#RST Reset */ + MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02 0x11 + /* ENET1_#INT Interrupt */ + MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03 0x11 + >; + }; + + pinctrl_fec: dhcom-fec-grp { + fsl,pins = < + MX8MP_IOMUXC_SAI1_MCLK__ENET1_TX_CLK 0x1f + MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3 + MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x3 + MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91 + MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91 + MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x91 + MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91 + MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91 + MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91 + MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x1f + MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x1f + MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x1f + MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x1f + MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x1f + MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x1f + MX8MP_IOMUXC_SAI1_TXD6__ENET1_RX_ER 0x1f + >; + }; + + pinctrl_flexcan1: dhcom-flexcan1-grp { + fsl,pins = < + MX8MP_IOMUXC_SPDIF_RX__CAN1_RX 0x154 + MX8MP_IOMUXC_SPDIF_TX__CAN1_TX 0x154 + >; + }; + + pinctrl_flexcan2: dhcom-flexcan2-grp { + fsl,pins = < + MX8MP_IOMUXC_UART3_RXD__CAN2_TX 0x154 + MX8MP_IOMUXC_UART3_TXD__CAN2_RX 0x154 + >; + }; + + pinctrl_flexspi: dhcom-flexspi-grp { + fsl,pins = < + MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK 0x1c2 + MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B 0x82 + MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00 0x82 + MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01 0x82 + MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02 0x82 + MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03 0x82 + >; + }; + + pinctrl_hdmi: dhcom-hdmi-grp { + fsl,pins = < + MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC 0x154 + MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x154 + >; + }; + + pinctrl_i2c3: dhcom-i2c3-grp { + fsl,pins = < + MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x40000084 + MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x40000084 + >; + }; + + pinctrl_i2c3_gpio: dhcom-i2c3-gpio-grp { + fsl,pins = < + MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18 0x84 + MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19 0x84 + >; + }; + + pinctrl_i2c4: dhcom-i2c4-grp { + fsl,pins = < + MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x40000084 + MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x40000084 + >; + }; + + pinctrl_i2c4_gpio: dhcom-i2c4-gpio-grp { + fsl,pins = < + MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20 0x84 + MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21 0x84 + >; + }; + + pinctrl_i2c5: dhcom-i2c5-grp { + fsl,pins = < + MX8MP_IOMUXC_HDMI_DDC_SCL__I2C5_SCL 0x40000084 + MX8MP_IOMUXC_HDMI_DDC_SDA__I2C5_SDA 0x40000084 + >; + }; + + pinctrl_i2c5_gpio: dhcom-i2c5-gpio-grp { + fsl,pins = < + MX8MP_IOMUXC_HDMI_DDC_SCL__GPIO3_IO26 0x84 + MX8MP_IOMUXC_HDMI_DDC_SDA__GPIO3_IO27 0x84 + >; + }; + + pinctrl_pmic: dhcom-pmic-grp { + fsl,pins = < + /* PMIC_nINT */ + MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x40000090 + >; + }; + + pinctrl_pwm1: dhcom-pwm1-grp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO01__PWM1_OUT 0x6 + >; + }; + + pinctrl_rtc: dhcom-rtc-grp { + fsl,pins = < + /* RTC_#INT Interrupt */ + MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05 0x40000080 + >; + }; + + pinctrl_touch: dhcom-touch-grp { + fsl,pins = < + /* #TOUCH_INT */ + MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00 0x40000080 + >; + }; + + pinctrl_uart1: dhcom-uart1-grp { + fsl,pins = < + /* Console UART */ + MX8MP_IOMUXC_SAI2_RXC__UART1_DCE_RX 0x49 + MX8MP_IOMUXC_SAI2_RXFS__UART1_DCE_TX 0x49 + MX8MP_IOMUXC_SAI2_RXD0__UART1_DCE_RTS 0x49 + MX8MP_IOMUXC_SAI2_TXFS__UART1_DCE_CTS 0x49 + >; + }; + + pinctrl_uart2: dhcom-uart2-grp { + fsl,pins = < + /* Bluetooth UART */ + MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x49 + MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x49 + MX8MP_IOMUXC_SD1_DATA4__UART2_DCE_RTS 0x49 + MX8MP_IOMUXC_SD1_DATA5__UART2_DCE_CTS 0x49 + >; + }; + + pinctrl_uart3: dhcom-uart3-grp { + fsl,pins = < + MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DCE_RX 0x49 + MX8MP_IOMUXC_ECSPI1_MOSI__UART3_DCE_TX 0x49 + MX8MP_IOMUXC_ECSPI1_SS0__UART3_DCE_RTS 0x49 + MX8MP_IOMUXC_ECSPI1_MISO__UART3_DCE_CTS 0x49 + >; + }; + + pinctrl_uart4: dhcom-uart4-grp { + fsl,pins = < + MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX 0x49 + MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX 0x49 + >; + }; + + pinctrl_usb0_vbus: dhcom-usb0-grp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO10__USB1_OTG_ID 0x0 + >; + }; + + pinctrl_usb1_vbus: dhcom-usb1-grp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR 0x6 + MX8MP_IOMUXC_GPIO1_IO15__USB2_OTG_OC 0x80 + >; + }; + + pinctrl_usdhc1: dhcom-usdhc1-grp { + fsl,pins = < + MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x190 + MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d0 + MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d0 + MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d0 + MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d0 + MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d0 + /* BT_REG_EN */ + MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x144 + /* WL_REG_EN */ + MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13 0x144 + >; + }; + + pinctrl_usdhc1_100mhz: dhcom-usdhc1-100mhz-grp { + fsl,pins = < + MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x194 + MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d4 + MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d4 + MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d4 + MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d4 + MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d4 + /* BT_REG_EN */ + MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x144 + /* WL_REG_EN */ + MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13 0x144 + >; + }; + + pinctrl_usdhc1_200mhz: dhcom-usdhc1-200mhz-grp { + fsl,pins = < + MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x196 + MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d6 + MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d6 + MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d6 + MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d6 + MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d6 + /* BT_REG_EN */ + MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x144 + /* WL_REG_EN */ + MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13 0x144 + >; + }; + + pinctrl_usdhc2: dhcom-usdhc2-grp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0 + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_100mhz: dhcom-usdhc2-100mhz-grp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4 + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_200mhz: dhcom-usdhc2-200mhz-grp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6 + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_vmmc: dhcom-usdhc2-vmmc-grp { + fsl,pins = < + MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x20 + >; + }; + + pinctrl_usdhc2_gpio: dhcom-usdhc2-gpio-grp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x40000080 + >; + }; + + pinctrl_usdhc3: dhcom-usdhc3-grp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190 + MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x141 + >; + }; + + pinctrl_usdhc3_100mhz: dhcom-usdhc3-100mhz-grp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194 + MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x141 + >; + }; + + pinctrl_usdhc3_200mhz: dhcom-usdhc3-200mhz-grp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196 + MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x141 + >; + }; + + pinctrl_wdog: dhcom-wdog-grp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0xc6 + >; + }; +}; diff --git a/dts/src/arm64/freescale/imx8mp-evk.dts b/dts/src/arm64/freescale/imx8mp-evk.dts index 9a4de739e6..f6b017ab5f 100644 --- a/dts/src/arm64/freescale/imx8mp-evk.dts +++ b/dts/src/arm64/freescale/imx8mp-evk.dts @@ -67,18 +67,20 @@ }; }; -&flexcan1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan1>; - xceiver-supply = <®_can1_stby>; - status = "okay"; +&A53_0 { + cpu-supply = <®_arm>; }; -&flexcan2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan2>; - xceiver-supply = <®_can2_stby>; - status = "disabled";/* can2 pin conflict with pdm */ +&A53_1 { + cpu-supply = <®_arm>; +}; + +&A53_2 { + cpu-supply = <®_arm>; +}; + +&A53_3 { + cpu-supply = <®_arm>; }; &eqos { @@ -197,6 +199,20 @@ }; }; +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_can1_stby>; + status = "okay"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_can2_stby>; + status = "disabled";/* can2 pin conflict with pdm */ +}; + &i2c1 { clock-frequency = <400000>; pinctrl-names = "default"; @@ -221,7 +237,7 @@ regulator-ramp-delay = <3125>; }; - BUCK2 { + reg_arm: BUCK2 { regulator-name = "BUCK2"; regulator-min-microvolt = <720000>; regulator-max-microvolt = <1025000>; diff --git a/dts/src/arm64/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/dts/src/arm64/freescale/imx8mp-tqma8mpql-mba8mpxl.dts new file mode 100644 index 0000000000..d8ca529761 --- /dev/null +++ b/dts/src/arm64/freescale/imx8mp-tqma8mpql-mba8mpxl.dts @@ -0,0 +1,702 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2021-2022 TQ-Systems GmbH + * Author: Alexander Stein <alexander.stein@tq-group.com> + */ + +/dts-v1/; + +#include <dt-bindings/leds/common.h> +#include <dt-bindings/net/ti-dp83867.h> +#include <dt-bindings/pwm/pwm.h> +#include "imx8mp-tqma8mpql.dtsi" + +/ { + model = "TQ-Systems i.MX8MPlus TQMa8MPxL on MBa8MPxL"; + compatible = "tq,imx8mp-tqma8mpql-mba8mpxl", "tq,imx8mp-tqma8mpql", "fsl,imx8mp"; + + chosen { + stdout-path = &uart4; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>; + }; + + aliases { + mmc0 = &usdhc3; + mmc1 = &usdhc2; + mmc2 = &usdhc1; + rtc0 = &pcf85063; + rtc1 = &snvs_rtc; + spi0 = &flexspi; + spi1 = &ecspi1; + spi2 = &ecspi2; + spi3 = &ecspi3; + }; + + backlight_lvds: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_backlight>; + pwms = <&pwm2 0 5000000 0>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + power-supply = <®_vcc_12v0>; + enable-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiobutton>; + autorepeat; + + switch-1 { + label = "S12"; + linux,code = <BTN_0>; + gpios = <&gpio5 26 GPIO_ACTIVE_LOW>; + }; + + switch-2 { + label = "S13"; + linux,code = <BTN_1>; + gpios = <&gpio5 27 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpioled>; + + led-0 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + function-enumerator = <0>; + gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + led-1 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_HEARTBEAT; + gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + led-2 { + color = <LED_COLOR_ID_YELLOW>; + function = LED_FUNCTION_STATUS; + function-enumerator = <1>; + gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>; + }; + }; + + display: display { + /* + * Display is not fixed, so compatible has to be added from + * DT overlay + */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lvdsdisplay>; + power-supply = <®_vcc_3v3>; + enable-gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>; + backlight = <&backlight_lvds>; + status = "disabled"; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <100>; + off-on-delay-us = <12000>; + }; + + reg_vcc_12v0: regulator-12v0 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg12v0>; + regulator-name = "VCC_12V0"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_vcc_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ocram: ocram@900000 { + no-map; + reg = <0 0x900000 0 0x70000>; + }; + + /* global autoconfigured region for contiguous allocations */ + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0 0x38000000>; + alloc-ranges = <0 0x40000000 0 0xB0000000>; + linux,cma-default; + }; + }; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&ecspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3>; + cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>; + status = "okay"; + + adc: adc@0 { + reg = <0>; + compatible = "microchip,mcp3202"; + /* 100 ksps * 18 */ + spi-max-frequency = <1800000>; + vref-supply = <®_vcc_3v3>; + #io-channel-cells = <1>; + }; +}; + +&eqos { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eqos>, <&pinctrl_eqos_phy>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy3>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ethphy3: ethernet-phy@3 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <3>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,dp83867-rxctrl-strap-quirk; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; + reset-assert-us = <500000>; + reset-deassert-us = <50000>; + enet-phy-lane-no-swap; + interrupt-parent = <&gpio4>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>, <&pinctrl_fec_phy>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,dp83867-rxctrl-strap-quirk; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + reset-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>; + reset-assert-us = <500000>; + reset-deassert-us = <50000>; + enet-phy-lane-no-swap; + interrupt-parent = <&gpio4>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + }; + }; +}; + +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_vcc_3v3>; + status = "okay"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_vcc_3v3>; + status = "okay"; +}; + +&gpio1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio1>; + + gpio-line-names = "GPO1", "GPO0", "", "GPO3", + "", "", "GPO2", "GPI0", + "PMIC_IRQ", "GPI1", "OTG_ID", "USB_HUB_RST#", + "OTG_PWR", "", "GPI2", "GPI3", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpio2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hoggpio2>; + + gpio-line-names = "", "", "", "", + "", "", "VCC12V_EN", "PERST#", + "", "", "CLKREQ#", "PEWAKE#", + "USDHC2_CD", "", "", "", + "", "", "", "V_SD3V3_EN", + "", "", "", "", + "", "", "", "", + "", "", "", ""; + + perst-hog { + gpio-hog; + gpios = <7 0>; + output-high; + line-name = "PERST#"; + }; + + clkreq-hog { + gpio-hog; + gpios = <10 0>; + input; + line-name = "CLKREQ#"; + }; + + pewake-hog { + gpio-hog; + gpios = <11 0>; + input; + line-name = "PEWAKE#"; + }; +}; + +&gpio3 { + gpio-line-names = "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "LVDS0_RESET#", "", + "", "", "", "LVDS0_BLT_EN", + "LVDS0_PWR_EN", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpio4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio4>; + + gpio-line-names = "ENET0_RST#", "ENET0_INT#", "ENET1_RST#", "ENET1_INT#", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "DP_IRQ", "DSI_EN", + "HDMI_OC#", "TEMP_EVENT#", "PCIE_CLK_OE#", "", + "", "", "", "FAN_PWR", + "RTC_EVENT#", "CODEC_RST#", "", ""; +}; + +&gpio5 { + gpio-line-names = "", "", "", "LED2", + "LED1", "LED0", "CSI0_RESET#", "CSI0_SYNC", + "CSI0_TRIGGER", "CSI0_ENABLE", "", "", + "", "ECSPI2_SS0", "", "", + "", "", "", "", + "", "", "", "", + "", "ECSPI3_SS0", "SWITCH_A", "SWITCH_B", + "", "", "", ""; +}; + +&i2c2 { + clock-frequency = <384000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + /* NXP SE97BTP with temperature sensor + eeprom */ + se97_1c: temperature-sensor-eeprom@1c { + compatible = "nxp,se97", "jedec,jc-42.4-temp"; + reg = <0x1c>; + }; + + at24c02_54: eeprom@54 { + compatible = "nxp,se97b", "atmel,24c02"; + reg = <0x54>; + pagesize = <16>; + vcc-supply = <®_vcc_3v3>; + }; +}; + +&i2c4 { + clock-frequency = <384000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c4>; + pinctrl-1 = <&pinctrl_i2c4_gpio>; + scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + +&i2c6 { + clock-frequency = <384000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c6>; + pinctrl-1 = <&pinctrl_i2c6_gpio>; + scl-gpios = <&gpio2 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio2 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + +&pcf85063 { + /* RTC_EVENT# is connected on MBa8MPxL */ + interrupt-parent = <&gpio4>; + interrupts = <28 IRQ_TYPE_EDGE_FALLING>; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "disabled"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + assigned-clocks = <&clk IMX8MP_CLK_UART1>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + assigned-clocks = <&clk IMX8MP_CLK_UART2>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + assigned-clocks = <&clk IMX8MP_CLK_UART3>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>; + status = "okay"; +}; + +&uart4 { + /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_usdhc2_vmmc>; + no-mmc; + no-sdio; + disable-wp; + bus-width = <4>; + status = "okay"; +}; + +&iomuxc { + pinctrl_backlight: backlightgrp { + fsl,pins = <MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19 0x14>; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = <MX8MP_IOMUXC_SAI5_RXD1__CAN1_TX 0x150>, + <MX8MP_IOMUXC_SAI5_RXD2__CAN1_RX 0x150>; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = <MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX 0x150>, + <MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX 0x150>; + }; + + /* only on X57, primary used as CSI0 control signals */ + pinctrl_ecspi1: ecspi1grp { + fsl,pins = <MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO 0x1c0>, + <MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI 0x1c0>, + <MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK 0x1c0>, + <MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09 0x1c0>; + }; + + /* on X63 and optionally on X57, can also be used as CSI1 control signals */ + pinctrl_ecspi2: ecspi2grp { + fsl,pins = <MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x1c0>, + <MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x1c0>, + <MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x1c0>, + <MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x1c0>; + }; + + pinctrl_ecspi3: ecspi3grp { + fsl,pins = <MX8MP_IOMUXC_UART1_TXD__ECSPI3_MOSI 0x1c0>, + <MX8MP_IOMUXC_UART1_RXD__ECSPI3_SCLK 0x1c0>, + <MX8MP_IOMUXC_UART2_RXD__ECSPI3_MISO 0x1c0>, + <MX8MP_IOMUXC_UART2_TXD__GPIO5_IO25 0x1c0>; + }; + + pinctrl_eqos: eqosgrp { + fsl,pins = <MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x40000044>, + <MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x40000044>, + <MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x90>, + <MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x90>, + <MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x90>, + <MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x90>, + <MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x90>, + <MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x90>, + <MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x12>, + <MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x12>, + <MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x12>, + <MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x12>, + <MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x12>, + <MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x14>; + }; + + pinctrl_eqos_event: eqosevtgrp { + fsl,pins = <MX8MP_IOMUXC_SAI2_RXD0__ENET_QOS_1588_EVENT2_OUT 0x100>, + <MX8MP_IOMUXC_SAI2_TXD0__ENET_QOS_1588_EVENT2_IN 0x1c0>; + }; + + pinctrl_eqos_phy: eqosphygrp { + fsl,pins = <MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02 0x100>, + <MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03 0x1c0>; + }; + + pinctrl_fec: fecgrp { + fsl,pins = <MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x40000044>, + <MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x40000044>, + <MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x90>, + <MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x90>, + <MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x90>, + <MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x90>, + <MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x90>, + <MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x90>, + <MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x12>, + <MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x12>, + <MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x12>, + <MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x12>, + <MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x12>, + <MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x14>; + }; + + pinctrl_fec_event: fecevtgrp { + fsl,pins = <MX8MP_IOMUXC_SAI1_RXFS__ENET1_1588_EVENT0_IN 0x100>, + <MX8MP_IOMUXC_SAI1_RXC__ENET1_1588_EVENT0_OUT 0x1c0>; + }; + + pinctrl_fec_phy: fecphygrp { + fsl,pins = <MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00 0x100>, + <MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01 0x1c0>; + }; + + pinctrl_fec_phyalt: fecphyaltgrp { + fsl,pins = <MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24 0x180>, + <MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25 0x180>; + }; + + pinctrl_gpiobutton: gpiobuttongrp { + fsl,pins = <MX8MP_IOMUXC_UART3_RXD__GPIO5_IO26 0x10>, + <MX8MP_IOMUXC_UART3_TXD__GPIO5_IO27 0x10>; + }; + + pinctrl_gpioled: gpioledgrp { + fsl,pins = <MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05 0x14>, + <MX8MP_IOMUXC_SPDIF_RX__GPIO5_IO04 0x14>, + <MX8MP_IOMUXC_SPDIF_TX__GPIO5_IO03 0x14>; + }; + + pinctrl_gpio1: gpio1grp { + fsl,pins = <MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00 0x10>, + <MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01 0x10>, + <MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x10>, + <MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x10>, + <MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 0x80>, + <MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09 0x80>, + <MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14 0x80>, + <MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15 0x80>; + }; + + pinctrl_gpio4: gpio4grp { + fsl,pins = <MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20 0x180>, + <MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x180>; + }; + + pinctrl_hdmi: hdmigrp { + fsl,pins = <MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL 0x400001c2>, + <MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA 0x400001c2>, + <MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x40000010>, + <MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC 0x40000010>; + }; + + pinctrl_hoggpio2: hoggpio2grp { + fsl,pins = <MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07 0x140>, + <MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10 0x140>, + <MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11 0x140>; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = <MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001e2>, + <MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001e2>; + }; + + pinctrl_i2c2_gpio: i2c2-gpiogrp { + fsl,pins = <MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16 0x400001e2>, + <MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17 0x400001e2>; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = <MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x400001e2>, + <MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x400001e2>; + }; + + pinctrl_i2c4_gpio: i2c4-gpiogrp { + fsl,pins = <MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20 0x400001e2>, + <MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21 0x400001e2>; + }; + + pinctrl_i2c6: i2c6grp { + fsl,pins = <MX8MP_IOMUXC_SD1_DATA0__I2C6_SCL 0x400001e2>, + <MX8MP_IOMUXC_SD1_DATA1__I2C6_SDA 0x400001e2>; + }; + + pinctrl_i2c6_gpio: i2c6-gpiogrp { + fsl,pins = <MX8MP_IOMUXC_SD1_DATA0__GPIO2_IO02 0x400001e2>, + <MX8MP_IOMUXC_SD1_DATA1__GPIO2_IO03 0x400001e2>; + }; + + pinctrl_lvdsdisplay: lvdsdisplaygrp { + fsl,pins = <MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20 0x10>; /* Power enable */ + }; + + /* LVDS Backlight */ + pinctrl_pwm2: pwm2grp { + fsl,pins = <MX8MP_IOMUXC_SAI5_RXD0__PWM2_OUT 0x14>; + }; + + /* FAN */ + pinctrl_pwm3: pwm3grp { + fsl,pins = <MX8MP_IOMUXC_I2C3_SDA__PWM3_OUT 0x14>; + }; + + pinctrl_reg12v0: reg12v0grp { + fsl,pins = <MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06 0x140>; /* VCC12V enable */ + }; + + /* X61 */ + pinctrl_uart1: uart1grp { + fsl,pins = <MX8MP_IOMUXC_SD1_CLK__UART1_DCE_TX 0x140>, + <MX8MP_IOMUXC_SD1_CMD__UART1_DCE_RX 0x140>; + }; + + /* X61 */ + pinctrl_uart2: uart2grp { + fsl,pins = <MX8MP_IOMUXC_SD1_DATA2__UART2_DCE_TX 0x140>, + <MX8MP_IOMUXC_SD1_DATA3__UART2_DCE_RX 0x140>; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = <MX8MP_IOMUXC_SD1_DATA6__UART3_DCE_TX 0x140>, + <MX8MP_IOMUXC_SD1_DATA7__UART3_DCE_RX 0x140>; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = <MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX 0x140>, + <MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX 0x140>; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x192>, + <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d2>, + <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d2>, + <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d2>, + <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d2>, + <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d2>, + <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0>; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194>, + <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4>, + <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4>, + <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4>, + <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4>, + <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4>, + <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0>; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194>, + <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4>, + <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4>, + <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4>, + <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4>, + <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4>, + <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0>; + }; + + pinctrl_usdhc2_gpio: usdhc2-gpiogrp { + fsl,pins = <MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c0>; + }; +}; diff --git a/dts/src/arm64/freescale/imx8mp-tqma8mpql.dtsi b/dts/src/arm64/freescale/imx8mp-tqma8mpql.dtsi new file mode 100644 index 0000000000..7bd680a926 --- /dev/null +++ b/dts/src/arm64/freescale/imx8mp-tqma8mpql.dtsi @@ -0,0 +1,284 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2021-2022 TQ-Systems GmbH + * Author: Alexander Stein <alexander.stein@tq-group.com> + */ + +#include "imx8mp.dtsi" + +/ { + model = "TQ-Systems i.MX8MPlus TQMa8MPxL"; + compatible = "tq,imx8mp-tqma8mpql", "fsl,imx8mp"; + + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0x80000000>; + }; + + /* identical to buck4_reg, but should never change */ + reg_vcc3v3: regulator-vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + /* e-MMC IO, needed for HS modes */ + reg_vcc1v8: regulator-vcc1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; +}; + +&A53_0 { + cpu-supply = <&buck2_reg>; +}; + +&flexspi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexspi0>; + status = "okay"; + + flash0: flash@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <80000000>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + }; +}; + +&i2c1 { + clock-frequency = <384000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + /* NXP SE97BTP with temperature sensor + eeprom */ + se97: temperature-sensor-eeprom@1b { + compatible = "nxp,se97", "jedec,jc-42.4-temp"; + reg = <0x1b>; + }; + + pmic: pmic@25 { + reg = <0x25>; + compatible = "nxp,pca9450c"; + + /* PMIC PCA9450 PMIC_nINT GPIO1_IO08 */ + pinctrl-0 = <&pinctrl_pmic>; + pinctrl-names = "default"; + interrupt-parent = <&gpio1>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + + regulators { + /* V_0V85_SOC: 0.85 .. 0.95 */ + buck1_reg: BUCK1 { + regulator-name = "BUCK1"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <950000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + /* VDD_ARM */ + buck2_reg: BUCK2 { + regulator-name = "BUCK2"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + nxp,dvs-run-voltage = <950000>; + nxp,dvs-standby-voltage = <850000>; + regulator-ramp-delay = <3125>; + }; + + /* VCC3V3 -> VMMC, ... must not be changed */ + buck4_reg: BUCK4 { + regulator-name = "BUCK4"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + /* V_1V8 -> VQMMC, SPI-NOR, ... must not be changed */ + buck5_reg: BUCK5 { + regulator-name = "BUCK5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + /* V_1V1 -> RAM, ... must not be changed */ + buck6_reg: BUCK6 { + regulator-name = "BUCK6"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + /* V_1V8_SNVS */ + ldo1_reg: LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + /* V_1V8_ANA */ + ldo3_reg: LDO3 { + regulator-name = "LDO3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + /* unused */ + ldo4_reg: LDO4 { + regulator-name = "LDO4"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + /* VCC SD IO - switched using SD2 VSELECT */ + ldo5_reg: LDO5 { + regulator-name = "LDO5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; + + pcf85063: rtc@51 { + compatible = "nxp,pcf85063a"; + reg = <0x51>; + }; + + at24c02: eeprom@53 { + compatible = "nxp,se97b", "atmel,24c02"; + read-only; + reg = <0x53>; + pagesize = <16>; + vcc-supply = <®_vcc3v3>; + }; + + m24c64: eeprom@57 { + compatible = "atmel,24c64"; + reg = <0x57>; + pagesize = <32>; + vcc-supply = <®_vcc3v3>; + }; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + no-sd; + no-sdio; + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc1v8>; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_flexspi0: flexspi0grp { + fsl,pins = <MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK 0x142>, + <MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B 0x82>, + <MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00 0x82>, + <MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01 0x82>, + <MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02 0x82>, + <MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03 0x82>; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = <MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001e2>, + <MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001e2>; + }; + + pinctrl_i2c1_gpio: i2c1-gpiogrp { + fsl,pins = <MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14 0x400001e2>, + <MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15 0x400001e2>; + }; + + pinctrl_pmic: pmicirqgrp { + fsl,pins = <MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08 0x1c0>; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { + fsl,pins = <MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x10>; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194>, + <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4>, + <MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4>, + <MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4>, + <MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4>, + <MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4>, + <MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4>, + <MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4>, + <MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4>, + <MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4>, + <MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x84>, + <MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x84>; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194>, + <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4>, + <MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4>, + <MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4>, + <MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4>, + <MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4>, + <MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4>, + <MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4>, + <MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4>, + <MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4>, + <MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x84>, + <MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x84>; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194>, + <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4>, + <MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4>, + <MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4>, + <MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4>, + <MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4>, + <MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4>, + <MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4>, + <MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4>, + <MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4>, + <MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x84>, + <MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x84>; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = <MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0x1c4>; + }; +}; diff --git a/dts/src/arm64/freescale/imx8mp-verdin.dtsi b/dts/src/arm64/freescale/imx8mp-verdin.dtsi index fb17e329cd..c5987bdbb3 100644 --- a/dts/src/arm64/freescale/imx8mp-verdin.dtsi +++ b/dts/src/arm64/freescale/imx8mp-verdin.dtsi @@ -49,7 +49,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; - wakeup { + button-wakeup { debounce-interval = <10>; /* Verdin CTRL_WAKE1_MICO# (SODIMM 252) */ gpios = <&gpio4 0 GPIO_ACTIVE_LOW>; @@ -146,6 +146,14 @@ }; }; +&cpu_alert0 { + temperature = <95000>; +}; + +&cpu_crit0 { + temperature = <105000>; +}; + /* Verdin SPI_1 */ &ecspi1 { #address-cells = <1>; diff --git a/dts/src/arm64/freescale/imx8mp.dtsi b/dts/src/arm64/freescale/imx8mp.dtsi index 410d0d5e6f..fe178b7d06 100644 --- a/dts/src/arm64/freescale/imx8mp.dtsi +++ b/dts/src/arm64/freescale/imx8mp.dtsi @@ -195,7 +195,7 @@ clk_ext4: clock-ext4 { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency= <133000000>; + clock-frequency = <133000000>; clock-output-names = "clk_ext4"; }; @@ -293,7 +293,7 @@ arm,no-tick-in-suspend; }; - soc@0 { + soc: soc@0 { compatible = "fsl,imx8mp-soc", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -791,6 +791,7 @@ compatible = "fsl,sec-v4.0-job-ring"; reg = <0x1000 0x1000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; }; sec_jr1: jr@2000 { @@ -903,7 +904,7 @@ <&clk IMX8MP_CLK_USDHC1_ROOT>; clock-names = "ipg", "ahb", "per"; fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; bus-width = <4>; status = "disabled"; }; @@ -917,7 +918,7 @@ <&clk IMX8MP_CLK_USDHC2_ROOT>; clock-names = "ipg", "ahb", "per"; fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; bus-width = <4>; status = "disabled"; }; @@ -931,7 +932,7 @@ <&clk IMX8MP_CLK_USDHC3_ROOT>; clock-names = "ipg", "ahb", "per"; fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; bus-width = <4>; status = "disabled"; }; @@ -1018,6 +1019,26 @@ }; }; + noc: interconnect@32700000 { + compatible = "fsl,imx8mp-noc", "fsl,imx8m-noc"; + reg = <0x32700000 0x100000>; + clocks = <&clk IMX8MP_CLK_NOC>; + #interconnect-cells = <1>; + operating-points-v2 = <&noc_opp_table>; + + noc_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200M { + opp-hz = /bits/ 64 <200000000>; + }; + + opp-1000M { + opp-hz = /bits/ 64 <1000000000>; + }; + }; + }; + aips4: bus@32c00000 { compatible = "fsl,aips-bus", "simple-bus"; reg = <0x32c00000 0x400000>; diff --git a/dts/src/arm64/freescale/imx8mq-evk.dts b/dts/src/arm64/freescale/imx8mq-evk.dts index 99fed35168..82387b9cb8 100644 --- a/dts/src/arm64/freescale/imx8mq-evk.dts +++ b/dts/src/arm64/freescale/imx8mq-evk.dts @@ -71,12 +71,36 @@ linux,autosuspend-period = <125>; }; + audio_codec_bt_sco: audio-codec-bt-sco { + compatible = "linux,bt-sco"; + #sound-dai-cells = <1>; + }; + wm8524: audio-codec { #sound-dai-cells = <0>; compatible = "wlf,wm8524"; wlf,mute-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; }; + sound-bt-sco { + compatible = "simple-audio-card"; + simple-audio-card,name = "bt-sco-audio"; + simple-audio-card,format = "dsp_a"; + simple-audio-card,bitclock-inversion; + simple-audio-card,frame-master = <&btcpu>; + simple-audio-card,bitclock-master = <&btcpu>; + + btcpu: simple-audio-card,cpu { + sound-dai = <&sai3>; + dai-tdm-slot-num = <2>; + dai-tdm-slot-width = <16>; + }; + + simple-audio-card,codec { + sound-dai = <&audio_codec_bt_sco 1>; + }; + }; + sound-wm8524 { compatible = "simple-audio-card"; simple-audio-card,name = "wm8524-audio"; @@ -386,6 +410,16 @@ status = "okay"; }; +&sai3 { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + assigned-clocks = <&clk IMX8MQ_CLK_SAI3>; + assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + status = "okay"; +}; + &snvs_pwrkey { status = "okay"; }; @@ -548,6 +582,15 @@ >; }; + pinctrl_sai3: sai3grp { + fsl,pins = < + MX8MQ_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6 + MX8MQ_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6 + MX8MQ_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6 + MX8MQ_IOMUXC_SAI3_RXD_SAI3_RX_DATA0 0xd6 + >; + }; + pinctrl_spdif1: spdif1grp { fsl,pins = < MX8MQ_IOMUXC_SPDIF_TX_SPDIF1_OUT 0xd6 diff --git a/dts/src/arm64/freescale/imx8mq-librem5-devkit.dts b/dts/src/arm64/freescale/imx8mq-librem5-devkit.dts index b86f188a44..6445c6b90b 100644 --- a/dts/src/arm64/freescale/imx8mq-librem5-devkit.dts +++ b/dts/src/arm64/freescale/imx8mq-librem5-devkit.dts @@ -36,21 +36,21 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; - btn1 { + button-1 { label = "VOL_UP"; gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; wakeup-source; linux,code = <KEY_VOLUMEUP>; }; - btn2 { + button-2 { label = "VOL_DOWN"; gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; wakeup-source; linux,code = <KEY_VOLUMEDOWN>; }; - wwan-wake { + button-3 { label = "WWAN_WAKE"; gpios = <&gpio3 8 GPIO_ACTIVE_LOW>; interrupt-parent = <&gpio3>; diff --git a/dts/src/arm64/freescale/imx8mq-librem5.dtsi b/dts/src/arm64/freescale/imx8mq-librem5.dtsi index 587e55aaa5..9eec8a7eec 100644 --- a/dts/src/arm64/freescale/imx8mq-librem5.dtsi +++ b/dts/src/arm64/freescale/imx8mq-librem5.dtsi @@ -37,7 +37,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_keys>; - vol-down { + key-vol-down { label = "VOL_DOWN"; gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; @@ -45,7 +45,7 @@ wakeup-source; }; - vol-up { + key-vol-up { label = "VOL_UP"; gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; diff --git a/dts/src/arm64/freescale/imx8mq-nitrogen.dts b/dts/src/arm64/freescale/imx8mq-nitrogen.dts index f70fb32b96..9dda2a1554 100644 --- a/dts/src/arm64/freescale/imx8mq-nitrogen.dts +++ b/dts/src/arm64/freescale/imx8mq-nitrogen.dts @@ -26,7 +26,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; - power { + button-power { label = "Power Button"; gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; @@ -152,7 +152,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_reg_arm_dram>; reg = <0x60>; - regulator-min-microvolt = <900000>; + regulator-min-microvolt = <900000>; regulator-max-microvolt = <1000000>; regulator-always-on; vsel-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; @@ -186,7 +186,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_reg_soc_gpu_vpu>; reg = <0x60>; - regulator-min-microvolt = <900000>; + regulator-min-microvolt = <900000>; regulator-max-microvolt = <1000000>; regulator-always-on; vsel-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>; diff --git a/dts/src/arm64/freescale/imx8mq-zii-ultra.dtsi b/dts/src/arm64/freescale/imx8mq-zii-ultra.dtsi index 2222ef7b3e..4e05120c62 100644 --- a/dts/src/arm64/freescale/imx8mq-zii-ultra.dtsi +++ b/dts/src/arm64/freescale/imx8mq-zii-ultra.dtsi @@ -443,7 +443,7 @@ status = "okay"; usbhub: usbhub@2c { - compatible ="microchip,usb2513b"; + compatible = "microchip,usb2513b"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbhub>; reg = <0x2c>; diff --git a/dts/src/arm64/freescale/imx8mq.dtsi b/dts/src/arm64/freescale/imx8mq.dtsi index 49eadb081b..e9f0cdd10a 100644 --- a/dts/src/arm64/freescale/imx8mq.dtsi +++ b/dts/src/arm64/freescale/imx8mq.dtsi @@ -94,7 +94,7 @@ clk_ext4: clock-ext4 { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency= <133000000>; + clock-frequency = <133000000>; clock-output-names = "clk_ext4"; }; @@ -320,7 +320,7 @@ arm,no-tick-in-suspend; }; - soc@0 { + soc: soc@0 { compatible = "fsl,imx8mq-soc", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -329,7 +329,7 @@ nvmem-cells = <&imx8mq_uid>; nvmem-cell-names = "soc_unique_id"; - bus@30000000 { /* AIPS1 */ + aips1: bus@30000000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; reg = <0x30000000 0x400000>; #address-cells = <1>; @@ -507,7 +507,7 @@ <0x00030005 0x00000053>, <0x00030006 0x0000005f>, <0x00030007 0x00000071>; - #thermal-sensor-cells = <1>; + #thermal-sensor-cells = <1>; }; wdog1: watchdog@30280000 { @@ -784,7 +784,7 @@ }; }; - bus@30400000 { /* AIPS2 */ + aips2: bus@30400000 { /* AIPS2 */ compatible = "fsl,aips-bus", "simple-bus"; reg = <0x30400000 0x400000>; #address-cells = <1>; @@ -844,7 +844,7 @@ }; }; - bus@30800000 { /* AIPS3 */ + aips3: bus@30800000 { /* AIPS3 */ compatible = "fsl,aips-bus", "simple-bus"; reg = <0x30800000 0x400000>; #address-cells = <1>; @@ -1018,6 +1018,7 @@ compatible = "fsl,sec-v4.0-job-ring"; reg = <0x1000 0x1000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; }; sec_jr1: jr@2000 { @@ -1369,7 +1370,7 @@ }; }; - bus@32c00000 { /* AIPS4 */ + aips4: bus@32c00000 { /* AIPS4 */ compatible = "fsl,aips-bus", "simple-bus"; reg = <0x32c00000 0x400000>; #address-cells = <1>; diff --git a/dts/src/arm64/freescale/imx8qm.dtsi b/dts/src/arm64/freescale/imx8qm.dtsi index 4f767012f1..c9c2b65362 100644 --- a/dts/src/arm64/freescale/imx8qm.dtsi +++ b/dts/src/arm64/freescale/imx8qm.dtsi @@ -181,7 +181,7 @@ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */ }; - scu { + system-controller { compatible = "fsl,imx-scu"; mbox-names = "tx0", "rx0", @@ -190,7 +190,7 @@ &lsio_mu1 1 0 &lsio_mu1 3 3>; - pd: imx8qx-pd { + pd: power-controller { compatible = "fsl,imx8qm-scu-pd", "fsl,scu-pd"; #power-domain-cells = <1>; }; diff --git a/dts/src/arm64/freescale/imx8qxp-colibri-eval-v3.dtsi b/dts/src/arm64/freescale/imx8qxp-colibri-eval-v3.dtsi index 144fc9e82d..a08e70fb7c 100644 --- a/dts/src/arm64/freescale/imx8qxp-colibri-eval-v3.dtsi +++ b/dts/src/arm64/freescale/imx8qxp-colibri-eval-v3.dtsi @@ -16,7 +16,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpiokeys>; - wakeup { + key-wakeup { label = "Wake-Up"; gpios = <&lsio_gpio3 10 GPIO_ACTIVE_HIGH>; linux,code = <KEY_WAKEUP>; @@ -38,17 +38,17 @@ /* Colibri UART_B */ &lpuart0 { - status= "okay"; + status = "okay"; }; /* Colibri UART_C */ &lpuart2 { - status= "okay"; + status = "okay"; }; /* Colibri UART_A */ &lpuart3 { - status= "okay"; + status = "okay"; }; /* Colibri FastEthernet */ diff --git a/dts/src/arm64/freescale/imx8qxp.dtsi b/dts/src/arm64/freescale/imx8qxp.dtsi index a79ae33cba..f4ea18bb95 100644 --- a/dts/src/arm64/freescale/imx8qxp.dtsi +++ b/dts/src/arm64/freescale/imx8qxp.dtsi @@ -201,7 +201,7 @@ method = "smc"; }; - scu { + system-controller { compatible = "fsl,imx-scu"; mbox-names = "tx0", "rx0", @@ -210,29 +210,27 @@ &lsio_mu1 1 0 &lsio_mu1 3 3>; - pd: imx8qx-pd { + pd: power-controller { compatible = "fsl,imx8qxp-scu-pd", "fsl,scu-pd"; #power-domain-cells = <1>; }; clk: clock-controller { - compatible = "fsl,imx8qxp-clk"; + compatible = "fsl,imx8qxp-clk", "fsl,scu-clk"; #clock-cells = <2>; - clocks = <&xtal32k &xtal24m>; - clock-names = "xtal_32KHz", "xtal_24Mhz"; }; iomuxc: pinctrl { compatible = "fsl,imx8qxp-iomuxc"; }; - ocotp: imx8qx-ocotp { + ocotp: ocotp { compatible = "fsl,imx8qxp-scu-ocotp"; #address-cells = <1>; #size-cells = <1>; }; - scu_key: scu-key { + scu_key: keys { compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key"; linux,keycodes = <KEY_POWER>; status = "disabled"; @@ -276,7 +274,7 @@ }; thermal_zones: thermal-zones { - cpu-thermal0 { + cpu0-thermal { polling-delay-passive = <250>; polling-delay = <2000>; thermal-sensors = <&tsens IMX_SC_R_SYSTEM>; diff --git a/dts/src/arm64/freescale/imx8ulp.dtsi b/dts/src/arm64/freescale/imx8ulp.dtsi index 09f7364dd1..60c1b018bf 100644 --- a/dts/src/arm64/freescale/imx8ulp.dtsi +++ b/dts/src/arm64/freescale/imx8ulp.dtsi @@ -137,7 +137,7 @@ }; }; - soc@0 { + soc: soc@0 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -331,7 +331,7 @@ clock-names = "ipg", "ahb", "per"; power-domains = <&scmi_devpd IMX8ULP_PD_USDHC0>; fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; bus-width = <4>; status = "disabled"; }; @@ -346,7 +346,7 @@ clock-names = "ipg", "ahb", "per"; power-domains = <&scmi_devpd IMX8ULP_PD_USDHC1>; fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; bus-width = <4>; status = "disabled"; }; @@ -361,13 +361,13 @@ clock-names = "ipg", "ahb", "per"; power-domains = <&scmi_devpd IMX8ULP_PD_USDHC2_USB1>; fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; bus-width = <4>; status = "disabled"; }; }; - gpioe: gpio@2d000000 { + gpioe: gpio@2d000080 { compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio"; reg = <0x2d000080 0x1000>, <0x2d000040 0x40>; gpio-controller; @@ -381,7 +381,7 @@ gpio-ranges = <&iomuxc1 0 32 24>; }; - gpiof: gpio@2d010000 { + gpiof: gpio@2d010080 { compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio"; reg = <0x2d010080 0x1000>, <0x2d010040 0x40>; gpio-controller; @@ -417,7 +417,7 @@ }; }; - gpiod: gpio@2e200000 { + gpiod: gpio@2e200080 { compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio"; reg = <0x2e200080 0x1000>, <0x2e200040 0x40>; gpio-controller; diff --git a/dts/src/arm64/freescale/imx93-11x11-evk.dts b/dts/src/arm64/freescale/imx93-11x11-evk.dts new file mode 100644 index 0000000000..69786c326d --- /dev/null +++ b/dts/src/arm64/freescale/imx93-11x11-evk.dts @@ -0,0 +1,114 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 NXP + */ + +/dts-v1/; + +#include "imx93.dtsi" + +/ { + model = "NXP i.MX93 11X11 EVK board"; + compatible = "fsl,imx93-11x11-evk", "fsl,imx93"; + + chosen { + stdout-path = &lpuart1; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&mu1 { + status = "okay"; +}; + +&mu2 { + status = "okay"; +}; + +&lpuart1 { /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1>; + pinctrl-2 = <&pinctrl_usdhc1>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_usdhc2_vmmc>; + bus-width = <4>; + status = "okay"; + no-sdio; + no-mmc; +}; + +&iomuxc { + pinctrl_uart1: uart1grp { + fsl,pins = < + MX93_PAD_UART1_RXD__LPUART1_RX 0x31e + MX93_PAD_UART1_TXD__LPUART1_TX 0x31e + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX93_PAD_SD1_CLK__USDHC1_CLK 0x17fe + MX93_PAD_SD1_CMD__USDHC1_CMD 0x13fe + MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x13fe + MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x13fe + MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x13fe + MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x13fe + MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x13fe + MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x13fe + MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x13fe + MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x13fe + MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x17fe + >; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { + fsl,pins = < + MX93_PAD_SD2_RESET_B__GPIO3_IO07 0x31e + >; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + MX93_PAD_SD2_CD_B__GPIO3_IO00 0x31e + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX93_PAD_SD2_CLK__USDHC2_CLK 0x17fe + MX93_PAD_SD2_CMD__USDHC2_CMD 0x13fe + MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x13fe + MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x13fe + MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x13fe + MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x13fe + MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + >; + }; +}; diff --git a/dts/src/arm64/freescale/imx93-pinfunc.h b/dts/src/arm64/freescale/imx93-pinfunc.h new file mode 100755 index 0000000000..4298a145f8 --- /dev/null +++ b/dts/src/arm64/freescale/imx93-pinfunc.h @@ -0,0 +1,623 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +/* + * Copyright 2022 NXP + */ + +#ifndef __DTS_IMX93_PINFUNC_H +#define __DTS_IMX93_PINFUNC_H + +/* + * The pin function ID is a tuple of + * <mux_reg conf_reg input_reg mux_mode input_val> + */ +#define MX93_PAD_DAP_TDI__JTAG_MUX_TDI 0x0000 0x01B0 0x03D8 0x0 0x0 +#define MX93_PAD_DAP_TDI__MQS2_LEFT 0x0000 0x01B0 0x0000 0x1 0x0 +#define MX93_PAD_DAP_TDI__CAN2_TX 0x0000 0x01B0 0x0000 0x3 0x0 +#define MX93_PAD_DAP_TDI__FLEXIO2_FLEXIO30 0x0000 0x01B0 0x0000 0x4 0x0 +#define MX93_PAD_DAP_TDI__GPIO3_IO28 0x0000 0x01B0 0x0000 0x5 0x0 +#define MX93_PAD_DAP_TDI__LPUART5_RX 0x0000 0x01B0 0x0430 0x6 0x0 +#define MX93_PAD_DAP_TMS_SWDIO__JTAG_MUX_TMS 0x0004 0x01B4 0x03DC 0x0 0x0 +#define MX93_PAD_DAP_TMS_SWDIO__FLEXIO2_FLEXIO31 0x0004 0x01B4 0x0000 0x4 0x0 +#define MX93_PAD_DAP_TMS_SWDIO__GPIO3_IO29 0x0004 0x01B4 0x0000 0x5 0x0 +#define MX93_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B 0x0004 0x01B4 0x0000 0x6 0x0 +#define MX93_PAD_DAP_TCLK_SWCLK__JTAG_MUX_TCK 0x0008 0x01B8 0x03D4 0x0 0x0 +#define MX93_PAD_DAP_TCLK_SWCLK__FLEXIO1_FLEXIO30 0x0008 0x01B8 0x0000 0x4 0x0 +#define MX93_PAD_DAP_TCLK_SWCLK__GPIO3_IO30 0x0008 0x01B8 0x0000 0x5 0x0 +#define MX93_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B 0x0008 0x01B8 0x042C 0x6 0x0 +#define MX93_PAD_DAP_TDO_TRACESWO__JTAG_MUX_TDO 0x000C 0x01BC 0x0000 0x0 0x0 +#define MX93_PAD_DAP_TDO_TRACESWO__MQS2_RIGHT 0x000C 0x01BC 0x0000 0x1 0x0 +#define MX93_PAD_DAP_TDO_TRACESWO__CAN2_RX 0x000C 0x01BC 0x0364 0x3 0x0 +#define MX93_PAD_DAP_TDO_TRACESWO__FLEXIO1_FLEXIO31 0x000C 0x01BC 0x0000 0x4 0x0 +#define MX93_PAD_DAP_TDO_TRACESWO__GPIO3_IO31 0x000C 0x01BC 0x0000 0x5 0x0 +#define MX93_PAD_DAP_TDO_TRACESWO__LPUART5_TX 0x000C 0x01BC 0x0434 0x6 0x0 +#define MX93_PAD_GPIO_IO00__GPIO2_IO00 0x0010 0x01C0 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO00__LPI2C3_SDA 0x0010 0x01C0 0x03E4 0x11 0x0 +#define MX93_PAD_GPIO_IO00__MEDIAMIX_CAM_CLK 0x0010 0x01C0 0x0000 0x2 0x0 +#define MX93_PAD_GPIO_IO00__MEDIAMIX_DISP_CLK 0x0010 0x01C0 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO00__LPSPI6_PCS0 0x0010 0x01C0 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO00__LPUART5_TX 0x0010 0x01C0 0x0434 0x5 0x1 +#define MX93_PAD_GPIO_IO00__LPI2C5_SDA 0x0010 0x01C0 0x03EC 0x16 0x0 +#define MX93_PAD_GPIO_IO00__FLEXIO1_FLEXIO00 0x0010 0x01C0 0x036C 0x7 0x0 +#define MX93_PAD_GPIO_IO01__GPIO2_IO01 0x0014 0x01C4 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO01__LPI2C3_SCL 0x0014 0x01C4 0x03E0 0x11 0x0 +#define MX93_PAD_GPIO_IO01__MEDIAMIX_CAM_DATA00 0x0014 0x01C4 0x0000 0x2 0x0 +#define MX93_PAD_GPIO_IO01__MEDIAMIX_DISP_DE 0x0014 0x01C4 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO01__LPSPI6_SIN 0x0014 0x01C4 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO01__LPUART5_RX 0x0014 0x01C4 0x0430 0x5 0x1 +#define MX93_PAD_GPIO_IO01__LPI2C5_SCL 0x0014 0x01C4 0x03E8 0x16 0x0 +#define MX93_PAD_GPIO_IO01__FLEXIO1_FLEXIO01 0x0014 0x01C4 0x0370 0x7 0x0 +#define MX93_PAD_GPIO_IO02__GPIO2_IO02 0x0018 0x01C8 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO02__LPI2C4_SDA 0x0018 0x01C8 0x0000 0x11 0x0 +#define MX93_PAD_GPIO_IO02__MEDIAMIX_CAM_VSYNC 0x0018 0x01C8 0x0000 0x2 0x0 +#define MX93_PAD_GPIO_IO02__MEDIAMIX_DISP_VSYNC 0x0018 0x01C8 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO02__LPSPI6_SOUT 0x0018 0x01C8 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO02__LPUART5_CTS_B 0x0018 0x01C8 0x042C 0x5 0x1 +#define MX93_PAD_GPIO_IO02__LPI2C6_SDA 0x0018 0x01C8 0x03F4 0x16 0x0 +#define MX93_PAD_GPIO_IO02__FLEXIO1_FLEXIO02 0x0018 0x01C8 0x0374 0x7 0x0 +#define MX93_PAD_GPIO_IO03__GPIO2_IO03 0x001C 0x01CC 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO03__LPI2C4_SCL 0x001C 0x01CC 0x0000 0x11 0x0 +#define MX93_PAD_GPIO_IO03__MEDIAMIX_CAM_HSYNC 0x001C 0x01CC 0x0000 0x2 0x0 +#define MX93_PAD_GPIO_IO03__MEDIAMIX_DISP_HSYNC 0x001C 0x01CC 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO03__LPSPI6_SCK 0x001C 0x01CC 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO03__LPUART5_RTS_B 0x001C 0x01CC 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO03__LPI2C6_SCL 0x001C 0x01CC 0x03F0 0x16 0x0 +#define MX93_PAD_GPIO_IO03__FLEXIO1_FLEXIO03 0x001C 0x01CC 0x0378 0x7 0x0 +#define MX93_PAD_GPIO_IO04__GPIO2_IO04 0x0020 0x01D0 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO04__TPM3_CH0 0x0020 0x01D0 0x0000 0x1 0x0 +#define MX93_PAD_GPIO_IO04__PDM_CLK 0x0020 0x01D0 0x0000 0x2 0x0 +#define MX93_PAD_GPIO_IO04__MEDIAMIX_DISP_DATA00 0x0020 0x01D0 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO04__LPSPI7_PCS0 0x0020 0x01D0 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO04__LPUART6_TX 0x0020 0x01D0 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO04__LPI2C6_SDA 0x0020 0x01D0 0x03F4 0x16 0x1 +#define MX93_PAD_GPIO_IO04__FLEXIO1_FLEXIO04 0x0020 0x01D0 0x037C 0x7 0x0 +#define MX93_PAD_GPIO_IO05__GPIO2_IO05 0x0024 0x01D4 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO05__TPM4_CH0 0x0024 0x01D4 0x0000 0x1 0x0 +#define MX93_PAD_GPIO_IO05__PDM_BIT_STREAM00 0x0024 0x01D4 0x0438 0x2 0x0 +#define MX93_PAD_GPIO_IO05__MEDIAMIX_DISP_DATA01 0x0024 0x01D4 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO05__LPSPI7_SIN 0x0024 0x01D4 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO05__LPUART6_RX 0x0024 0x01D4 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO05__LPI2C6_SCL 0x0024 0x01D4 0x03F0 0x16 0x1 +#define MX93_PAD_GPIO_IO05__FLEXIO1_FLEXIO05 0x0024 0x01D4 0x0380 0x7 0x0 +#define MX93_PAD_GPIO_IO06__GPIO2_IO06 0x0028 0x01D8 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO06__TPM5_CH0 0x0028 0x01D8 0x0000 0x1 0x0 +#define MX93_PAD_GPIO_IO06__PDM_BIT_STREAM01 0x0028 0x01D8 0x043C 0x2 0x0 +#define MX93_PAD_GPIO_IO06__MEDIAMIX_DISP_DATA02 0x0028 0x01D8 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO06__LPSPI7_SOUT 0x0028 0x01D8 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO06__LPUART6_CTS_B 0x0028 0x01D8 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO06__LPI2C7_SDA 0x0028 0x01D8 0x03FC 0x16 0x0 +#define MX93_PAD_GPIO_IO06__FLEXIO1_FLEXIO06 0x0028 0x01D8 0x0384 0x7 0x0 +#define MX93_PAD_GPIO_IO07__GPIO2_IO07 0x002C 0x01DC 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO07__LPSPI3_PCS1 0x002C 0x01DC 0x0000 0x1 0x0 +#define MX93_PAD_GPIO_IO07__MEDIAMIX_CAM_DATA01 0x002C 0x01DC 0x0000 0x2 0x0 +#define MX93_PAD_GPIO_IO07__MEDIAMIX_DISP_DATA03 0x002C 0x01DC 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO07__LPSPI7_SCK 0x002C 0x01DC 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO07__LPUART6_RTS_B 0x002C 0x01DC 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO07__LPI2C7_SCL 0x002C 0x01DC 0x03F8 0x16 0x0 +#define MX93_PAD_GPIO_IO07__FLEXIO1_FLEXIO07 0x002C 0x01DC 0x0388 0x7 0x0 +#define MX93_PAD_GPIO_IO08__GPIO2_IO08 0x0030 0x01E0 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO08__LPSPI3_PCS0 0x0030 0x01E0 0x0000 0x1 0x0 +#define MX93_PAD_GPIO_IO08__MEDIAMIX_CAM_DATA02 0x0030 0x01E0 0x0000 0x2 0x0 +#define MX93_PAD_GPIO_IO08__MEDIAMIX_DISP_DATA04 0x0030 0x01E0 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO08__TPM6_CH0 0x0030 0x01E0 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO08__LPUART7_TX 0x0030 0x01E0 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO08__LPI2C7_SDA 0x0030 0x01E0 0x03FC 0x16 0x1 +#define MX93_PAD_GPIO_IO08__FLEXIO1_FLEXIO08 0x0030 0x01E0 0x038C 0x7 0x0 +#define MX93_PAD_GPIO_IO09__GPIO2_IO09 0x0034 0x01E4 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO09__LPSPI3_SIN 0x0034 0x01E4 0x0000 0x1 0x0 +#define MX93_PAD_GPIO_IO09__MEDIAMIX_CAM_DATA03 0x0034 0x01E4 0x0000 0x2 0x0 +#define MX93_PAD_GPIO_IO09__MEDIAMIX_DISP_DATA05 0x0034 0x01E4 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO09__TPM3_EXTCLK 0x0034 0x01E4 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO09__LPUART7_RX 0x0034 0x01E4 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO09__LPI2C7_SCL 0x0034 0x01E4 0x03F8 0x16 0x1 +#define MX93_PAD_GPIO_IO09__FLEXIO1_FLEXIO09 0x0034 0x01E4 0x0390 0x7 0x0 +#define MX93_PAD_GPIO_IO10__GPIO2_IO10 0x0038 0x01E8 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO10__LPSPI3_SOUT 0x0038 0x01E8 0x0000 0x1 0x0 +#define MX93_PAD_GPIO_IO10__MEDIAMIX_CAM_DATA04 0x0038 0x01E8 0x0000 0x2 0x0 +#define MX93_PAD_GPIO_IO10__MEDIAMIX_DISP_DATA06 0x0038 0x01E8 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO10__TPM4_EXTCLK 0x0038 0x01E8 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO10__LPUART7_CTS_B 0x0038 0x01E8 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO10__LPI2C8_SDA 0x0038 0x01E8 0x0404 0x16 0x0 +#define MX93_PAD_GPIO_IO10__FLEXIO1_FLEXIO10 0x0038 0x01E8 0x0394 0x7 0x0 +#define MX93_PAD_GPIO_IO11__GPIO2_IO11 0x003C 0x01EC 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO11__LPSPI3_SCK 0x003C 0x01EC 0x0000 0x1 0x0 +#define MX93_PAD_GPIO_IO11__MEDIAMIX_CAM_DATA05 0x003C 0x01EC 0x0000 0x2 0x0 +#define MX93_PAD_GPIO_IO11__MEDIAMIX_DISP_DATA07 0x003C 0x01EC 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO11__TPM5_EXTCLK 0x003C 0x01EC 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO11__LPUART7_RTS_B 0x003C 0x01EC 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO11__LPI2C8_SCL 0x003C 0x01EC 0x0400 0x16 0x0 +#define MX93_PAD_GPIO_IO11__FLEXIO1_FLEXIO11 0x003C 0x01EC 0x0398 0x7 0x0 +#define MX93_PAD_GPIO_IO12__GPIO2_IO12 0x0040 0x01F0 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO12__TPM3_CH2 0x0040 0x01F0 0x0000 0x1 0x0 +#define MX93_PAD_GPIO_IO12__PDM_BIT_STREAM02 0x0040 0x01F0 0x0440 0x2 0x0 +#define MX93_PAD_GPIO_IO12__MEDIAMIX_DISP_DATA08 0x0040 0x01F0 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO12__LPSPI8_PCS0 0x0040 0x01F0 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO12__LPUART8_TX 0x0040 0x01F0 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO12__LPI2C8_SDA 0x0040 0x01F0 0x0404 0x16 0x1 +#define MX93_PAD_GPIO_IO12__SAI3_RX_SYNC 0x0040 0x01F0 0x0450 0x7 0x0 +#define MX93_PAD_GPIO_IO13__GPIO2_IO13 0x0044 0x01F4 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO13__TPM4_CH2 0x0044 0x01F4 0x0000 0x1 0x0 +#define MX93_PAD_GPIO_IO13__PDM_BIT_STREAM03 0x0044 0x01F4 0x0444 0x2 0x0 +#define MX93_PAD_GPIO_IO13__MEDIAMIX_DISP_DATA09 0x0044 0x01F4 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO13__LPSPI8_SIN 0x0044 0x01F4 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO13__LPUART8_RX 0x0044 0x01F4 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO13__LPI2C8_SCL 0x0044 0x01F4 0x0400 0x16 0x1 +#define MX93_PAD_GPIO_IO13__FLEXIO1_FLEXIO13 0x0044 0x01F4 0x039C 0x7 0x0 +#define MX93_PAD_GPIO_IO14__GPIO2_IO14 0x0048 0x01F8 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO14__LPUART3_TX 0x0048 0x01F8 0x041C 0x1 0x0 +#define MX93_PAD_GPIO_IO14__MEDIAMIX_CAM_DATA06 0x0048 0x01F8 0x0000 0x2 0x0 +#define MX93_PAD_GPIO_IO14__MEDIAMIX_DISP_DATA10 0x0048 0x01F8 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO14__LPSPI8_SOUT 0x0048 0x01F8 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO14__LPUART8_CTS_B 0x0048 0x01F8 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO14__LPUART4_TX 0x0048 0x01F8 0x0428 0x6 0x0 +#define MX93_PAD_GPIO_IO14__FLEXIO1_FLEXIO14 0x0048 0x01F8 0x03A0 0x7 0x0 +#define MX93_PAD_GPIO_IO15__GPIO2_IO15 0x004C 0x01FC 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO15__LPUART3_RX 0x004C 0x01FC 0x0418 0x1 0x0 +#define MX93_PAD_GPIO_IO15__MEDIAMIX_CAM_DATA07 0x004C 0x01FC 0x0000 0x2 0x0 +#define MX93_PAD_GPIO_IO15__MEDIAMIX_DISP_DATA11 0x004C 0x01FC 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO15__LPSPI8_SCK 0x004C 0x01FC 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO15__LPUART8_RTS_B 0x004C 0x01FC 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO15__LPUART4_RX 0x004C 0x01FC 0x0424 0x6 0x0 +#define MX93_PAD_GPIO_IO15__FLEXIO1_FLEXIO15 0x004C 0x01FC 0x03A4 0x7 0x0 +#define MX93_PAD_GPIO_IO16__GPIO2_IO16 0x0050 0x0200 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO16__SAI3_TX_BCLK 0x0050 0x0200 0x0000 0x1 0x0 +#define MX93_PAD_GPIO_IO16__PDM_BIT_STREAM02 0x0050 0x0200 0x0440 0x2 0x1 +#define MX93_PAD_GPIO_IO16__MEDIAMIX_DISP_DATA12 0x0050 0x0200 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO16__LPUART3_CTS_B 0x0050 0x0200 0x0414 0x4 0x0 +#define MX93_PAD_GPIO_IO16__LPSPI4_PCS2 0x0050 0x0200 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO16__LPUART4_CTS_B 0x0050 0x0200 0x0420 0x6 0x0 +#define MX93_PAD_GPIO_IO16__FLEXIO1_FLEXIO16 0x0050 0x0200 0x03A8 0x7 0x0 +#define MX93_PAD_GPIO_IO17__GPIO2_IO17 0x0054 0x0204 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO17__SAI3_MCLK 0x0054 0x0204 0x0000 0x1 0x0 +#define MX93_PAD_GPIO_IO17__MEDIAMIX_CAM_DATA08 0x0054 0x0204 0x0000 0x2 0x0 +#define MX93_PAD_GPIO_IO17__MEDIAMIX_DISP_DATA13 0x0054 0x0204 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO17__LPUART3_RTS_B 0x0054 0x0204 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO17__LPSPI4_PCS1 0x0054 0x0204 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO17__LPUART4_RTS_B 0x0054 0x0204 0x0000 0x6 0x0 +#define MX93_PAD_GPIO_IO17__FLEXIO1_FLEXIO17 0x0054 0x0204 0x03AC 0x7 0x0 +#define MX93_PAD_GPIO_IO18__GPIO2_IO18 0x0058 0x0208 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO18__SAI3_RX_BCLK 0x0058 0x0208 0x044C 0x1 0x0 +#define MX93_PAD_GPIO_IO18__MEDIAMIX_CAM_DATA09 0x0058 0x0208 0x0000 0x2 0x0 +#define MX93_PAD_GPIO_IO18__MEDIAMIX_DISP_DATA14 0x0058 0x0208 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO18__LPSPI5_PCS0 0x0058 0x0208 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO18__LPSPI4_PCS0 0x0058 0x0208 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO18__TPM5_CH2 0x0058 0x0208 0x0000 0x6 0x0 +#define MX93_PAD_GPIO_IO18__FLEXIO1_FLEXIO18 0x0058 0x0208 0x03B0 0x7 0x0 +#define MX93_PAD_GPIO_IO19__GPIO2_IO19 0x005C 0x020C 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO19__SAI3_RX_SYNC 0x005C 0x020C 0x0450 0x1 0x1 +#define MX93_PAD_GPIO_IO19__PDM_BIT_STREAM03 0x005C 0x020C 0x0444 0x2 0x1 +#define MX93_PAD_GPIO_IO19__MEDIAMIX_DISP_DATA15 0x005C 0x020C 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO19__LPSPI5_SIN 0x005C 0x020C 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO19__LPSPI4_SIN 0x005C 0x020C 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO19__TPM6_CH2 0x005C 0x020C 0x0000 0x6 0x0 +#define MX93_PAD_GPIO_IO19__SAI3_TX_DATA00 0x005C 0x020C 0x0000 0x7 0x0 +#define MX93_PAD_GPIO_IO20__GPIO2_IO20 0x0060 0x0210 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO20__SAI3_RX_DATA00 0x0060 0x0210 0x0000 0x1 0x0 +#define MX93_PAD_GPIO_IO20__PDM_BIT_STREAM00 0x0060 0x0210 0x0438 0x2 0x1 +#define MX93_PAD_GPIO_IO20__MEDIAMIX_DISP_DATA16 0x0060 0x0210 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO20__LPSPI5_SOUT 0x0060 0x0210 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO20__LPSPI4_SOUT 0x0060 0x0210 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO20__TPM3_CH1 0x0060 0x0210 0x0000 0x6 0x0 +#define MX93_PAD_GPIO_IO20__FLEXIO1_FLEXIO20 0x0060 0x0210 0x03B4 0x7 0x0 +#define MX93_PAD_GPIO_IO21__GPIO2_IO21 0x0064 0x0214 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO21__SAI3_TX_DATA00 0x0064 0x0214 0x0000 0x1 0x0 +#define MX93_PAD_GPIO_IO21__PDM_CLK 0x0064 0x0214 0x0000 0x2 0x0 +#define MX93_PAD_GPIO_IO21__MEDIAMIX_DISP_DATA17 0x0064 0x0214 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO21__LPSPI5_SCK 0x0064 0x0214 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO21__LPSPI4_SCK 0x0064 0x0214 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO21__TPM4_CH1 0x0064 0x0214 0x0000 0x6 0x0 +#define MX93_PAD_GPIO_IO21__SAI3_RX_BCLK 0x0064 0x0214 0x044C 0x7 0x1 +#define MX93_PAD_GPIO_IO22__GPIO2_IO22 0x0068 0x0218 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO22__USDHC3_CLK 0x0068 0x0218 0x0458 0x1 0x0 +#define MX93_PAD_GPIO_IO22__SPDIF_IN 0x0068 0x0218 0x0454 0x2 0x0 +#define MX93_PAD_GPIO_IO22__MEDIAMIX_DISP_DATA18 0x0068 0x0218 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO22__TPM5_CH1 0x0068 0x0218 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO22__TPM6_EXTCLK 0x0068 0x0218 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO22__LPI2C5_SDA 0x0068 0x0218 0x03EC 0x16 0x1 +#define MX93_PAD_GPIO_IO22__FLEXIO1_FLEXIO22 0x0068 0x0218 0x03B8 0x7 0x0 +#define MX93_PAD_GPIO_IO23__GPIO2_IO23 0x006C 0x021C 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO23__USDHC3_CMD 0x006C 0x021C 0x045C 0x1 0x0 +#define MX93_PAD_GPIO_IO23__SPDIF_OUT 0x006C 0x021C 0x0000 0x2 0x0 +#define MX93_PAD_GPIO_IO23__MEDIAMIX_DISP_DATA19 0x006C 0x021C 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO23__TPM6_CH1 0x006C 0x021C 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO23__LPI2C5_SCL 0x006C 0x021C 0x03E8 0x16 0x1 +#define MX93_PAD_GPIO_IO23__FLEXIO1_FLEXIO23 0x006C 0x021C 0x03BC 0x7 0x0 +#define MX93_PAD_GPIO_IO24__GPIO2_IO24 0x0070 0x0220 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO24__USDHC3_DATA0 0x0070 0x0220 0x0460 0x1 0x0 +#define MX93_PAD_GPIO_IO24__MEDIAMIX_DISP_DATA20 0x0070 0x0220 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO24__TPM3_CH3 0x0070 0x0220 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO24__JTAG_MUX_TDO 0x0070 0x0220 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO24__LPSPI6_PCS1 0x0070 0x0220 0x0000 0x6 0x0 +#define MX93_PAD_GPIO_IO24__FLEXIO1_FLEXIO24 0x0070 0x0220 0x03C0 0x7 0x0 +#define MX93_PAD_GPIO_IO25__GPIO2_IO25 0x0074 0x0224 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO25__USDHC3_DATA1 0x0074 0x0224 0x0464 0x1 0x0 +#define MX93_PAD_GPIO_IO25__CAN2_TX 0x0074 0x0224 0x0000 0x2 0x0 +#define MX93_PAD_GPIO_IO25__MEDIAMIX_DISP_DATA21 0x0074 0x0224 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO25__TPM4_CH3 0x0074 0x0224 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO25__JTAG_MUX_TCK 0x0074 0x0224 0x03D4 0x5 0x1 +#define MX93_PAD_GPIO_IO25__LPSPI7_PCS1 0x0074 0x0224 0x0000 0x6 0x0 +#define MX93_PAD_GPIO_IO25__FLEXIO1_FLEXIO25 0x0074 0x0224 0x03C4 0x7 0x0 +#define MX93_PAD_GPIO_IO26__GPIO2_IO26 0x0078 0x0228 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO26__USDHC3_DATA2 0x0078 0x0228 0x0468 0x1 0x0 +#define MX93_PAD_GPIO_IO26__PDM_BIT_STREAM01 0x0078 0x0228 0x043C 0x2 0x1 +#define MX93_PAD_GPIO_IO26__MEDIAMIX_DISP_DATA22 0x0078 0x0228 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO26__TPM5_CH3 0x0078 0x0228 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO26__JTAG_MUX_TDI 0x0078 0x0228 0x03D8 0x5 0x1 +#define MX93_PAD_GPIO_IO26__LPSPI8_PCS1 0x0078 0x0228 0x0000 0x6 0x0 +#define MX93_PAD_GPIO_IO26__SAI3_TX_SYNC 0x0078 0x0228 0x0000 0x7 0x0 +#define MX93_PAD_GPIO_IO27__GPIO2_IO27 0x007C 0x022C 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO27__USDHC3_DATA3 0x007C 0x022C 0x046C 0x1 0x0 +#define MX93_PAD_GPIO_IO27__CAN2_RX 0x007C 0x022C 0x0364 0x2 0x1 +#define MX93_PAD_GPIO_IO27__MEDIAMIX_DISP_DATA23 0x007C 0x022C 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO27__TPM6_CH3 0x007C 0x022C 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO27__JTAG_MUX_TMS 0x007C 0x022C 0x03DC 0x5 0x1 +#define MX93_PAD_GPIO_IO27__LPSPI5_PCS1 0x007C 0x022C 0x0000 0x6 0x0 +#define MX93_PAD_GPIO_IO27__FLEXIO1_FLEXIO27 0x007C 0x022C 0x03C8 0x7 0x0 +#define MX93_PAD_GPIO_IO28__GPIO2_IO28 0x0080 0x0230 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO28__LPI2C3_SDA 0x0080 0x0230 0x03E4 0x11 0x1 +#define MX93_PAD_GPIO_IO28__FLEXIO1_FLEXIO28 0x0080 0x0230 0x0000 0x7 0x0 +#define MX93_PAD_GPIO_IO29__GPIO2_IO29 0x0084 0x0234 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO29__LPI2C3_SCL 0x0084 0x0234 0x03E0 0x11 0x1 +#define MX93_PAD_GPIO_IO29__FLEXIO1_FLEXIO29 0x0084 0x0234 0x0000 0x7 0x0 +#define MX93_PAD_CCM_CLKO1__CCMSRCGPCMIX_CLKO1 0x0088 0x0238 0x0000 0x0 0x0 +#define MX93_PAD_CCM_CLKO1__FLEXIO1_FLEXIO26 0x0088 0x0238 0x0000 0x4 0x0 +#define MX93_PAD_CCM_CLKO1__GPIO3_IO26 0x0088 0x0238 0x0000 0x5 0x0 +#define MX93_PAD_CCM_CLKO2__GPIO3_IO27 0x008C 0x023C 0x0000 0x5 0x0 +#define MX93_PAD_CCM_CLKO2__CCMSRCGPCMIX_CLKO2 0x008C 0x023C 0x0000 0x0 0x0 +#define MX93_PAD_CCM_CLKO2__FLEXIO1_FLEXIO27 0x008C 0x023C 0x03C8 0x4 0x1 +#define MX93_PAD_CCM_CLKO3__CCMSRCGPCMIX_CLKO3 0x0090 0x0240 0x0000 0x0 0x0 +#define MX93_PAD_CCM_CLKO3__FLEXIO2_FLEXIO28 0x0090 0x0240 0x0000 0x4 0x0 +#define MX93_PAD_CCM_CLKO3__GPIO4_IO28 0x0090 0x0240 0x0000 0x5 0x0 +#define MX93_PAD_CCM_CLKO4__CCMSRCGPCMIX_CLKO4 0x0094 0x0244 0x0000 0x0 0x0 +#define MX93_PAD_CCM_CLKO4__FLEXIO2_FLEXIO29 0x0094 0x0244 0x0000 0x4 0x0 +#define MX93_PAD_CCM_CLKO4__GPIO4_IO29 0x0094 0x0244 0x0000 0x5 0x0 +#define MX93_PAD_ENET1_MDC__ENET_QOS_MDC 0x0098 0x0248 0x0000 0x0 0x0 +#define MX93_PAD_ENET1_MDC__LPUART3_DCB_B 0x0098 0x0248 0x0000 0x1 0x0 +#define MX93_PAD_ENET1_MDC__I3C2_SCL 0x0098 0x0248 0x03CC 0x2 0x0 +#define MX93_PAD_ENET1_MDC__HSIOMIX_OTG_ID1 0x0098 0x0248 0x0000 0x3 0x0 +#define MX93_PAD_ENET1_MDC__FLEXIO2_FLEXIO00 0x0098 0x0248 0x0000 0x4 0x0 +#define MX93_PAD_ENET1_MDC__GPIO4_IO00 0x0098 0x0248 0x0000 0x5 0x0 +#define MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO 0x009C 0x024C 0x0000 0x0 0x0 +#define MX93_PAD_ENET1_MDIO__LPUART3_RIN_B 0x009C 0x024C 0x0000 0x1 0x0 +#define MX93_PAD_ENET1_MDIO__I3C2_SDA 0x009C 0x024C 0x03D0 0x2 0x0 +#define MX93_PAD_ENET1_MDIO__HSIOMIX_OTG_PWR1 0x009C 0x024C 0x0000 0x3 0x0 +#define MX93_PAD_ENET1_MDIO__FLEXIO2_FLEXIO01 0x009C 0x024C 0x0000 0x4 0x0 +#define MX93_PAD_ENET1_MDIO__GPIO4_IO01 0x009C 0x024C 0x0000 0x5 0x0 +#define MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3 0x00A0 0x0250 0x0000 0x0 0x0 +#define MX93_PAD_ENET1_TD3__CAN2_TX 0x00A0 0x0250 0x0000 0x2 0x0 +#define MX93_PAD_ENET1_TD3__HSIOMIX_OTG_ID2 0x00A0 0x0250 0x0000 0x3 0x0 +#define MX93_PAD_ENET1_TD3__FLEXIO2_FLEXIO02 0x00A0 0x0250 0x0000 0x4 0x0 +#define MX93_PAD_ENET1_TD3__GPIO4_IO02 0x00A0 0x0250 0x0000 0x5 0x0 +#define MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2 0x00A4 0x0254 0x0000 0x0 0x0 +#define MX93_PAD_ENET1_TD2__CCM_ENET_QOS_CLOCK_GENERATE_REF_CLK 0x00A4 0x0254 0x0000 0x1 0x0 +#define MX93_PAD_ENET1_TD2__CAN2_RX 0x00A4 0x0254 0x0364 0x2 0x2 +#define MX93_PAD_ENET1_TD2__HSIOMIX_OTG_OC2 0x00A4 0x0254 0x0000 0x3 0x0 +#define MX93_PAD_ENET1_TD2__FLEXIO2_FLEXIO03 0x00A4 0x0254 0x0000 0x4 0x0 +#define MX93_PAD_ENET1_TD2__GPIO4_IO03 0x00A4 0x0254 0x0000 0x5 0x0 +#define MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1 0x00A8 0x0258 0x0000 0x0 0x0 +#define MX93_PAD_ENET1_TD1__LPUART3_RTS_B 0x00A8 0x0258 0x0000 0x1 0x0 +#define MX93_PAD_ENET1_TD1__I3C2_PUR 0x00A8 0x0258 0x0000 0x2 0x0 +#define MX93_PAD_ENET1_TD1__HSIOMIX_OTG_OC1 0x00A8 0x0258 0x0000 0x3 0x0 +#define MX93_PAD_ENET1_TD1__FLEXIO2_FLEXIO04 0x00A8 0x0258 0x0000 0x4 0x0 +#define MX93_PAD_ENET1_TD1__GPIO4_IO04 0x00A8 0x0258 0x0000 0x5 0x0 +#define MX93_PAD_ENET1_TD1__I3C2_PUR_B 0x00A8 0x0258 0x0000 0x6 0x0 +#define MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x00AC 0x025C 0x0000 0x0 0x0 +#define MX93_PAD_ENET1_TD0__LPUART3_TX 0x00AC 0x025C 0x041C 0x1 0x1 +#define MX93_PAD_ENET1_TD0__FLEXIO2_FLEXIO05 0x00AC 0x025C 0x0000 0x4 0x0 +#define MX93_PAD_ENET1_TD0__GPIO4_IO05 0x00AC 0x025C 0x0000 0x5 0x0 +#define MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x00B0 0x0260 0x0000 0x0 0x0 +#define MX93_PAD_ENET1_TX_CTL__LPUART3_DTR_B 0x00B0 0x0260 0x0000 0x1 0x0 +#define MX93_PAD_ENET1_TX_CTL__FLEXIO2_FLEXIO06 0x00B0 0x0260 0x0000 0x4 0x0 +#define MX93_PAD_ENET1_TX_CTL__GPIO4_IO06 0x00B0 0x0260 0x0000 0x5 0x0 +#define MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x00B4 0x0264 0x0000 0x0 0x0 +#define MX93_PAD_ENET1_TXC__ENET_QOS_TX_ER 0x00B4 0x0264 0x0000 0x1 0x0 +#define MX93_PAD_ENET1_TXC__FLEXIO2_FLEXIO07 0x00B4 0x0264 0x0000 0x4 0x0 +#define MX93_PAD_ENET1_TXC__GPIO4_IO07 0x00B4 0x0264 0x0000 0x5 0x0 +#define MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x00B8 0x0268 0x0000 0x0 0x0 +#define MX93_PAD_ENET1_RX_CTL__LPUART3_DSR_B 0x00B8 0x0268 0x0000 0x1 0x0 +#define MX93_PAD_ENET1_RX_CTL__HSIOMIX_OTG_PWR2 0x00B8 0x0268 0x0000 0x3 0x0 +#define MX93_PAD_ENET1_RX_CTL__FLEXIO2_FLEXIO08 0x00B8 0x0268 0x0000 0x4 0x0 +#define MX93_PAD_ENET1_RX_CTL__GPIO4_IO08 0x00B8 0x0268 0x0000 0x5 0x0 +#define MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x00BC 0x026C 0x0000 0x0 0x0 +#define MX93_PAD_ENET1_RXC__ENET_QOS_RX_ER 0x00BC 0x026C 0x0000 0x1 0x0 +#define MX93_PAD_ENET1_RXC__FLEXIO2_FLEXIO09 0x00BC 0x026C 0x0000 0x4 0x0 +#define MX93_PAD_ENET1_RXC__GPIO4_IO09 0x00BC 0x026C 0x0000 0x5 0x0 +#define MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x00C0 0x0270 0x0000 0x0 0x0 +#define MX93_PAD_ENET1_RD0__LPUART3_RX 0x00C0 0x0270 0x0418 0x1 0x1 +#define MX93_PAD_ENET1_RD0__FLEXIO2_FLEXIO10 0x00C0 0x0270 0x0000 0x4 0x0 +#define MX93_PAD_ENET1_RD0__GPIO4_IO10 0x00C0 0x0270 0x0000 0x5 0x0 +#define MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x00C4 0x0274 0x0000 0x0 0x0 +#define MX93_PAD_ENET1_RD1__LPUART3_CTS_B 0x00C4 0x0274 0x0414 0x1 0x1 +#define MX93_PAD_ENET1_RD1__LPTMR2_ALT1 0x00C4 0x0274 0x0408 0x3 0x0 +#define MX93_PAD_ENET1_RD1__FLEXIO2_FLEXIO11 0x00C4 0x0274 0x0000 0x4 0x0 +#define MX93_PAD_ENET1_RD1__GPIO4_IO11 0x00C4 0x0274 0x0000 0x5 0x0 +#define MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2 0x00C8 0x0278 0x0000 0x0 0x0 +#define MX93_PAD_ENET1_RD2__LPTMR2_ALT2 0x00C8 0x0278 0x040C 0x3 0x0 +#define MX93_PAD_ENET1_RD2__FLEXIO2_FLEXIO12 0x00C8 0x0278 0x0000 0x4 0x0 +#define MX93_PAD_ENET1_RD2__GPIO4_IO12 0x00C8 0x0278 0x0000 0x5 0x0 +#define MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3 0x00CC 0x027C 0x0000 0x0 0x0 +#define MX93_PAD_ENET1_RD3__FLEXSPI1_TESTER_TRIGGER 0x00CC 0x027C 0x0000 0x2 0x0 +#define MX93_PAD_ENET1_RD3__LPTMR2_ALT3 0x00CC 0x027C 0x0410 0x3 0x0 +#define MX93_PAD_ENET1_RD3__FLEXIO2_FLEXIO13 0x00CC 0x027C 0x0000 0x4 0x0 +#define MX93_PAD_ENET1_RD3__GPIO4_IO13 0x00CC 0x027C 0x0000 0x5 0x0 +#define MX93_PAD_ENET2_MDC__ENET1_MDC 0x00D0 0x0280 0x0000 0x0 0x0 +#define MX93_PAD_ENET2_MDC__LPUART4_DCB_B 0x00D0 0x0280 0x0000 0x1 0x0 +#define MX93_PAD_ENET2_MDC__SAI2_RX_SYNC 0x00D0 0x0280 0x0000 0x2 0x0 +#define MX93_PAD_ENET2_MDC__FLEXIO2_FLEXIO14 0x00D0 0x0280 0x0000 0x4 0x0 +#define MX93_PAD_ENET2_MDC__GPIO4_IO14 0x00D0 0x0280 0x0000 0x5 0x0 +#define MX93_PAD_ENET2_MDIO__ENET1_MDIO 0x00D4 0x0284 0x0000 0x0 0x0 +#define MX93_PAD_ENET2_MDIO__LPUART4_RIN_B 0x00D4 0x0284 0x0000 0x1 0x0 +#define MX93_PAD_ENET2_MDIO__SAI2_RX_BCLK 0x00D4 0x0284 0x0000 0x2 0x0 +#define MX93_PAD_ENET2_MDIO__FLEXIO2_FLEXIO15 0x00D4 0x0284 0x0000 0x4 0x0 +#define MX93_PAD_ENET2_MDIO__GPIO4_IO15 0x00D4 0x0284 0x0000 0x5 0x0 +#define MX93_PAD_ENET2_TD3__SAI2_RX_DATA00 0x00D8 0x0288 0x0000 0x2 0x0 +#define MX93_PAD_ENET2_TD3__FLEXIO2_FLEXIO16 0x00D8 0x0288 0x0000 0x4 0x0 +#define MX93_PAD_ENET2_TD3__GPIO4_IO16 0x00D8 0x0288 0x0000 0x5 0x0 +#define MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3 0x00D8 0x0288 0x0000 0x0 0x0 +#define MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2 0x00DC 0x028C 0x0000 0x0 0x0 +#define MX93_PAD_ENET2_TD2__ENET1_TX_CLK 0x00DC 0x028C 0x0000 0x1 0x0 +#define MX93_PAD_ENET2_TD2__SAI2_RX_DATA01 0x00DC 0x028C 0x0000 0x2 0x0 +#define MX93_PAD_ENET2_TD2__FLEXIO2_FLEXIO17 0x00DC 0x028C 0x0000 0x4 0x0 +#define MX93_PAD_ENET2_TD2__GPIO4_IO17 0x00DC 0x028C 0x0000 0x5 0x0 +#define MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1 0x00E0 0x0290 0x0000 0x0 0x0 +#define MX93_PAD_ENET2_TD1__LPUART4_RTS_B 0x00E0 0x0290 0x0000 0x1 0x0 +#define MX93_PAD_ENET2_TD1__SAI2_RX_DATA02 0x00E0 0x0290 0x0000 0x2 0x0 +#define MX93_PAD_ENET2_TD1__FLEXIO2_FLEXIO18 0x00E0 0x0290 0x0000 0x4 0x0 +#define MX93_PAD_ENET2_TD1__GPIO4_IO18 0x00E0 0x0290 0x0000 0x5 0x0 +#define MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0 0x00E4 0x0294 0x0000 0x0 0x0 +#define MX93_PAD_ENET2_TD0__LPUART4_TX 0x00E4 0x0294 0x0428 0x1 0x1 +#define MX93_PAD_ENET2_TD0__SAI2_RX_DATA03 0x00E4 0x0294 0x0000 0x2 0x0 +#define MX93_PAD_ENET2_TD0__FLEXIO2_FLEXIO19 0x00E4 0x0294 0x0000 0x4 0x0 +#define MX93_PAD_ENET2_TD0__GPIO4_IO19 0x00E4 0x0294 0x0000 0x5 0x0 +#define MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL 0x00E8 0x0298 0x0000 0x0 0x0 +#define MX93_PAD_ENET2_TX_CTL__LPUART4_DTR_B 0x00E8 0x0298 0x0000 0x1 0x0 +#define MX93_PAD_ENET2_TX_CTL__SAI2_TX_SYNC 0x00E8 0x0298 0x0000 0x2 0x0 +#define MX93_PAD_ENET2_TX_CTL__FLEXIO2_FLEXIO20 0x00E8 0x0298 0x0000 0x4 0x0 +#define MX93_PAD_ENET2_TX_CTL__GPIO4_IO20 0x00E8 0x0298 0x0000 0x5 0x0 +#define MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC 0x00EC 0x029C 0x0000 0x0 0x0 +#define MX93_PAD_ENET2_TXC__ENET1_TX_ER 0x00EC 0x029C 0x0000 0x1 0x0 +#define MX93_PAD_ENET2_TXC__SAI2_TX_BCLK 0x00EC 0x029C 0x0000 0x2 0x0 +#define MX93_PAD_ENET2_TXC__FLEXIO2_FLEXIO21 0x00EC 0x029C 0x0000 0x4 0x0 +#define MX93_PAD_ENET2_TXC__GPIO4_IO21 0x00EC 0x029C 0x0000 0x5 0x0 +#define MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL 0x00F0 0x02A0 0x0000 0x0 0x0 +#define MX93_PAD_ENET2_RX_CTL__LPUART4_DSR_B 0x00F0 0x02A0 0x0000 0x1 0x0 +#define MX93_PAD_ENET2_RX_CTL__SAI2_TX_DATA00 0x00F0 0x02A0 0x0000 0x2 0x0 +#define MX93_PAD_ENET2_RX_CTL__FLEXIO2_FLEXIO22 0x00F0 0x02A0 0x0000 0x4 0x0 +#define MX93_PAD_ENET2_RX_CTL__GPIO4_IO22 0x00F0 0x02A0 0x0000 0x5 0x0 +#define MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC 0x00F4 0x02A4 0x0000 0x0 0x0 +#define MX93_PAD_ENET2_RXC__ENET1_RX_ER 0x00F4 0x02A4 0x0000 0x1 0x0 +#define MX93_PAD_ENET2_RXC__SAI2_TX_DATA01 0x00F4 0x02A4 0x0000 0x2 0x0 +#define MX93_PAD_ENET2_RXC__FLEXIO2_FLEXIO23 0x00F4 0x02A4 0x0000 0x4 0x0 +#define MX93_PAD_ENET2_RXC__GPIO4_IO23 0x00F4 0x02A4 0x0000 0x5 0x0 +#define MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0 0x00F8 0x02A8 0x0000 0x0 0x0 +#define MX93_PAD_ENET2_RD0__LPUART4_RX 0x00F8 0x02A8 0x0424 0x1 0x1 +#define MX93_PAD_ENET2_RD0__SAI2_TX_DATA02 0x00F8 0x02A8 0x0000 0x2 0x0 +#define MX93_PAD_ENET2_RD0__FLEXIO2_FLEXIO24 0x00F8 0x02A8 0x0000 0x4 0x0 +#define MX93_PAD_ENET2_RD0__GPIO4_IO24 0x00F8 0x02A8 0x0000 0x5 0x0 +#define MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1 0x00FC 0x02AC 0x0000 0x0 0x0 +#define MX93_PAD_ENET2_RD1__SPDIF_IN 0x00FC 0x02AC 0x0454 0x1 0x1 +#define MX93_PAD_ENET2_RD1__SAI2_TX_DATA03 0x00FC 0x02AC 0x0000 0x2 0x0 +#define MX93_PAD_ENET2_RD1__FLEXIO2_FLEXIO25 0x00FC 0x02AC 0x0000 0x4 0x0 +#define MX93_PAD_ENET2_RD1__GPIO4_IO25 0x00FC 0x02AC 0x0000 0x5 0x0 +#define MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2 0x0100 0x02B0 0x0000 0x0 0x0 +#define MX93_PAD_ENET2_RD2__LPUART4_CTS_B 0x0100 0x02B0 0x0420 0x1 0x1 +#define MX93_PAD_ENET2_RD2__SAI2_MCLK 0x0100 0x02B0 0x0000 0x2 0x0 +#define MX93_PAD_ENET2_RD2__MQS2_RIGHT 0x0100 0x02B0 0x0000 0x3 0x0 +#define MX93_PAD_ENET2_RD2__FLEXIO2_FLEXIO26 0x0100 0x02B0 0x0000 0x4 0x0 +#define MX93_PAD_ENET2_RD2__GPIO4_IO26 0x0100 0x02B0 0x0000 0x5 0x0 +#define MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3 0x0104 0x02B4 0x0000 0x0 0x0 +#define MX93_PAD_ENET2_RD3__SPDIF_OUT 0x0104 0x02B4 0x0000 0x1 0x0 +#define MX93_PAD_ENET2_RD3__SPDIF_IN 0x0104 0x02B4 0x0454 0x2 0x2 +#define MX93_PAD_ENET2_RD3__MQS2_LEFT 0x0104 0x02B4 0x0000 0x3 0x0 +#define MX93_PAD_ENET2_RD3__FLEXIO2_FLEXIO27 0x0104 0x02B4 0x0000 0x4 0x0 +#define MX93_PAD_ENET2_RD3__GPIO4_IO27 0x0104 0x02B4 0x0000 0x5 0x0 +#define MX93_PAD_SD1_CLK__FLEXIO1_FLEXIO08 0x0108 0x02B8 0x038C 0x4 0x1 +#define MX93_PAD_SD1_CLK__GPIO3_IO08 0x0108 0x02B8 0x0000 0x5 0x0 +#define MX93_PAD_SD1_CLK__USDHC1_CLK 0x0108 0x02B8 0x0000 0x0 0x0 +#define MX93_PAD_SD1_CMD__USDHC1_CMD 0x010C 0x02BC 0x0000 0x0 0x0 +#define MX93_PAD_SD1_CMD__FLEXIO1_FLEXIO09 0x010C 0x02BC 0x0390 0x4 0x1 +#define MX93_PAD_SD1_CMD__GPIO3_IO09 0x010C 0x02BC 0x0000 0x5 0x0 +#define MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x0110 0x02C0 0x0000 0x0 0x0 +#define MX93_PAD_SD1_DATA0__FLEXIO1_FLEXIO10 0x0110 0x02C0 0x0394 0x4 0x1 +#define MX93_PAD_SD1_DATA0__GPIO3_IO10 0x0110 0x02C0 0x0000 0x5 0x0 +#define MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x0114 0x02C4 0x0000 0x0 0x0 +#define MX93_PAD_SD1_DATA1__FLEXIO1_FLEXIO11 0x0114 0x02C4 0x0398 0x4 0x1 +#define MX93_PAD_SD1_DATA1__GPIO3_IO11 0x0114 0x02C4 0x0000 0x5 0x0 +#define MX93_PAD_SD1_DATA1__CCMSRCGPCMIX_INT_BOOT 0x0114 0x02C4 0x0000 0x6 0x0 +#define MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x0118 0x02C8 0x0000 0x0 0x0 +#define MX93_PAD_SD1_DATA2__FLEXIO1_FLEXIO12 0x0118 0x02C8 0x0000 0x4 0x0 +#define MX93_PAD_SD1_DATA2__GPIO3_IO12 0x0118 0x02C8 0x0000 0x5 0x0 +#define MX93_PAD_SD1_DATA2__CCMSRCGPCMIX_PMIC_READY 0x0118 0x02C8 0x0000 0x6 0x0 +#define MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x011C 0x02CC 0x0000 0x0 0x0 +#define MX93_PAD_SD1_DATA3__FLEXSPI1_A_SS1_B 0x011C 0x02CC 0x0000 0x1 0x0 +#define MX93_PAD_SD1_DATA3__FLEXIO1_FLEXIO13 0x011C 0x02CC 0x039C 0x4 0x1 +#define MX93_PAD_SD1_DATA3__GPIO3_IO13 0x011C 0x02CC 0x0000 0x5 0x0 +#define MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x0120 0x02D0 0x0000 0x0 0x0 +#define MX93_PAD_SD1_DATA4__FLEXSPI1_A_DATA04 0x0120 0x02D0 0x0000 0x1 0x0 +#define MX93_PAD_SD1_DATA4__FLEXIO1_FLEXIO14 0x0120 0x02D0 0x03A0 0x4 0x1 +#define MX93_PAD_SD1_DATA4__GPIO3_IO14 0x0120 0x02D0 0x0000 0x5 0x0 +#define MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x0124 0x02D4 0x0000 0x0 0x0 +#define MX93_PAD_SD1_DATA5__FLEXSPI1_A_DATA05 0x0124 0x02D4 0x0000 0x1 0x0 +#define MX93_PAD_SD1_DATA5__USDHC1_RESET_B 0x0124 0x02D4 0x0000 0x2 0x0 +#define MX93_PAD_SD1_DATA5__FLEXIO1_FLEXIO15 0x0124 0x02D4 0x03A4 0x4 0x1 +#define MX93_PAD_SD1_DATA5__GPIO3_IO15 0x0124 0x02D4 0x0000 0x5 0x0 +#define MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x0128 0x02D8 0x0000 0x0 0x0 +#define MX93_PAD_SD1_DATA6__FLEXSPI1_A_DATA06 0x0128 0x02D8 0x0000 0x1 0x0 +#define MX93_PAD_SD1_DATA6__USDHC1_CD_B 0x0128 0x02D8 0x0000 0x2 0x0 +#define MX93_PAD_SD1_DATA6__FLEXIO1_FLEXIO16 0x0128 0x02D8 0x03A8 0x4 0x1 +#define MX93_PAD_SD1_DATA6__GPIO3_IO16 0x0128 0x02D8 0x0000 0x5 0x0 +#define MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x012C 0x02DC 0x0000 0x0 0x0 +#define MX93_PAD_SD1_DATA7__FLEXSPI1_A_DATA07 0x012C 0x02DC 0x0000 0x1 0x0 +#define MX93_PAD_SD1_DATA7__USDHC1_WP 0x012C 0x02DC 0x0000 0x2 0x0 +#define MX93_PAD_SD1_DATA7__FLEXIO1_FLEXIO17 0x012C 0x02DC 0x03AC 0x4 0x1 +#define MX93_PAD_SD1_DATA7__GPIO3_IO17 0x012C 0x02DC 0x0000 0x5 0x0 +#define MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x0130 0x02E0 0x0000 0x0 0x0 +#define MX93_PAD_SD1_STROBE__FLEXSPI1_A_DQS 0x0130 0x02E0 0x0000 0x1 0x0 +#define MX93_PAD_SD1_STROBE__FLEXIO1_FLEXIO18 0x0130 0x02E0 0x03B0 0x4 0x1 +#define MX93_PAD_SD1_STROBE__GPIO3_IO18 0x0130 0x02E0 0x0000 0x5 0x0 +#define MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x0134 0x02E4 0x0000 0x0 0x0 +#define MX93_PAD_SD2_VSELECT__USDHC2_WP 0x0134 0x02E4 0x0000 0x1 0x0 +#define MX93_PAD_SD2_VSELECT__LPTMR2_ALT3 0x0134 0x02E4 0x0410 0x2 0x1 +#define MX93_PAD_SD2_VSELECT__FLEXIO1_FLEXIO19 0x0134 0x02E4 0x0000 0x4 0x0 +#define MX93_PAD_SD2_VSELECT__GPIO3_IO19 0x0134 0x02E4 0x0000 0x5 0x0 +#define MX93_PAD_SD2_VSELECT__CCMSRCGPCMIX_EXT_CLK1 0x0134 0x02E4 0x0368 0x6 0x0 +#define MX93_PAD_SD3_CLK__USDHC3_CLK 0x0138 0x02E8 0x0458 0x0 0x1 +#define MX93_PAD_SD3_CLK__FLEXSPI1_A_SCLK 0x0138 0x02E8 0x0000 0x1 0x0 +#define MX93_PAD_SD3_CLK__FLEXIO1_FLEXIO20 0x0138 0x02E8 0x03B4 0x4 0x1 +#define MX93_PAD_SD3_CLK__GPIO3_IO20 0x0138 0x02E8 0x0000 0x5 0x0 +#define MX93_PAD_SD3_CMD__USDHC3_CMD 0x013C 0x02EC 0x045C 0x0 0x1 +#define MX93_PAD_SD3_CMD__FLEXSPI1_A_SS0_B 0x013C 0x02EC 0x0000 0x1 0x0 +#define MX93_PAD_SD3_CMD__FLEXIO1_FLEXIO21 0x013C 0x02EC 0x0000 0x4 0x0 +#define MX93_PAD_SD3_CMD__GPIO3_IO21 0x013C 0x02EC 0x0000 0x5 0x0 +#define MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x0140 0x02F0 0x0460 0x0 0x1 +#define MX93_PAD_SD3_DATA0__FLEXSPI1_A_DATA00 0x0140 0x02F0 0x0000 0x1 0x0 +#define MX93_PAD_SD3_DATA0__FLEXIO1_FLEXIO22 0x0140 0x02F0 0x03B8 0x4 0x1 +#define MX93_PAD_SD3_DATA0__GPIO3_IO22 0x0140 0x02F0 0x0000 0x5 0x0 +#define MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x0144 0x02F4 0x0464 0x0 0x1 +#define MX93_PAD_SD3_DATA1__FLEXSPI1_A_DATA01 0x0144 0x02F4 0x0000 0x1 0x0 +#define MX93_PAD_SD3_DATA1__FLEXIO1_FLEXIO23 0x0144 0x02F4 0x03BC 0x4 0x1 +#define MX93_PAD_SD3_DATA1__GPIO3_IO23 0x0144 0x02F4 0x0000 0x5 0x0 +#define MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x0148 0x02F8 0x0468 0x0 0x1 +#define MX93_PAD_SD3_DATA2__FLEXSPI1_A_DATA02 0x0148 0x02F8 0x0000 0x1 0x0 +#define MX93_PAD_SD3_DATA2__FLEXIO1_FLEXIO24 0x0148 0x02F8 0x03C0 0x4 0x1 +#define MX93_PAD_SD3_DATA2__GPIO3_IO24 0x0148 0x02F8 0x0000 0x5 0x0 +#define MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x014C 0x02FC 0x046C 0x0 0x1 +#define MX93_PAD_SD3_DATA3__FLEXSPI1_A_DATA03 0x014C 0x02FC 0x0000 0x1 0x0 +#define MX93_PAD_SD3_DATA3__FLEXIO1_FLEXIO25 0x014C 0x02FC 0x03C4 0x4 0x1 +#define MX93_PAD_SD3_DATA3__GPIO3_IO25 0x014C 0x02FC 0x0000 0x5 0x0 +#define MX93_PAD_SD2_CD_B__USDHC2_CD_B 0x0150 0x0300 0x0000 0x0 0x0 +#define MX93_PAD_SD2_CD_B__ENET_QOS_1588_EVENT0_IN 0x0150 0x0300 0x0000 0x1 0x0 +#define MX93_PAD_SD2_CD_B__I3C2_SCL 0x0150 0x0300 0x03CC 0x2 0x1 +#define MX93_PAD_SD2_CD_B__FLEXIO1_FLEXIO00 0x0150 0x0300 0x036C 0x4 0x1 +#define MX93_PAD_SD2_CD_B__GPIO3_IO00 0x0150 0x0300 0x0000 0x5 0x0 +#define MX93_PAD_SD2_CLK__USDHC2_CLK 0x0154 0x0304 0x0000 0x0 0x0 +#define MX93_PAD_SD2_CLK__ENET_QOS_1588_EVENT0_OUT 0x0154 0x0304 0x0000 0x1 0x0 +#define MX93_PAD_SD2_CLK__I3C2_SDA 0x0154 0x0304 0x03D0 0x2 0x1 +#define MX93_PAD_SD2_CLK__FLEXIO1_FLEXIO01 0x0154 0x0304 0x0370 0x4 0x1 +#define MX93_PAD_SD2_CLK__GPIO3_IO01 0x0154 0x0304 0x0000 0x5 0x0 +#define MX93_PAD_SD2_CLK__CCMSRCGPCMIX_OBSERVE0 0x0154 0x0304 0x0000 0x6 0x0 +#define MX93_PAD_SD2_CMD__USDHC2_CMD 0x0158 0x0308 0x0000 0x0 0x0 +#define MX93_PAD_SD2_CMD__ENET1_1588_EVENT0_IN 0x0158 0x0308 0x0000 0x1 0x0 +#define MX93_PAD_SD2_CMD__I3C2_PUR 0x0158 0x0308 0x0000 0x2 0x0 +#define MX93_PAD_SD2_CMD__I3C2_PUR_B 0x0158 0x0308 0x0000 0x3 0x0 +#define MX93_PAD_SD2_CMD__FLEXIO1_FLEXIO02 0x0158 0x0308 0x0374 0x4 0x1 +#define MX93_PAD_SD2_CMD__GPIO3_IO02 0x0158 0x0308 0x0000 0x5 0x0 +#define MX93_PAD_SD2_CMD__CCMSRCGPCMIX_OBSERVE1 0x0158 0x0308 0x0000 0x6 0x0 +#define MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x015C 0x030C 0x0000 0x0 0x0 +#define MX93_PAD_SD2_DATA0__ENET1_1588_EVENT0_OUT 0x015C 0x030C 0x0000 0x1 0x0 +#define MX93_PAD_SD2_DATA0__CAN2_TX 0x015C 0x030C 0x0000 0x2 0x0 +#define MX93_PAD_SD2_DATA0__FLEXIO1_FLEXIO03 0x015C 0x030C 0x0378 0x4 0x1 +#define MX93_PAD_SD2_DATA0__GPIO3_IO03 0x015C 0x030C 0x0000 0x5 0x0 +#define MX93_PAD_SD2_DATA0__CCMSRCGPCMIX_OBSERVE2 0x015C 0x030C 0x0000 0x6 0x0 +#define MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x0160 0x0310 0x0000 0x0 0x0 +#define MX93_PAD_SD2_DATA1__ENET1_1588_EVENT1_IN 0x0160 0x0310 0x0000 0x1 0x0 +#define MX93_PAD_SD2_DATA1__CAN2_RX 0x0160 0x0310 0x0364 0x2 0x3 +#define MX93_PAD_SD2_DATA1__FLEXIO1_FLEXIO04 0x0160 0x0310 0x037C 0x4 0x1 +#define MX93_PAD_SD2_DATA1__GPIO3_IO04 0x0160 0x0310 0x0000 0x5 0x0 +#define MX93_PAD_SD2_DATA1__CCMSRCGPCMIX_WAIT 0x0160 0x0310 0x0000 0x6 0x0 +#define MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x0164 0x0314 0x0000 0x0 0x0 +#define MX93_PAD_SD2_DATA2__ENET1_1588_EVENT1_OUT 0x0164 0x0314 0x0000 0x1 0x0 +#define MX93_PAD_SD2_DATA2__MQS2_RIGHT 0x0164 0x0314 0x0000 0x2 0x0 +#define MX93_PAD_SD2_DATA2__FLEXIO1_FLEXIO05 0x0164 0x0314 0x0380 0x4 0x1 +#define MX93_PAD_SD2_DATA2__GPIO3_IO05 0x0164 0x0314 0x0000 0x5 0x0 +#define MX93_PAD_SD2_DATA2__CCMSRCGPCMIX_STOP 0x0164 0x0314 0x0000 0x6 0x0 +#define MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x0168 0x0318 0x0000 0x0 0x0 +#define MX93_PAD_SD2_DATA3__LPTMR2_ALT1 0x0168 0x0318 0x0408 0x1 0x1 +#define MX93_PAD_SD2_DATA3__MQS2_LEFT 0x0168 0x0318 0x0000 0x2 0x0 +#define MX93_PAD_SD2_DATA3__FLEXIO1_FLEXIO06 0x0168 0x0318 0x0384 0x4 0x1 +#define MX93_PAD_SD2_DATA3__GPIO3_IO06 0x0168 0x0318 0x0000 0x5 0x0 +#define MX93_PAD_SD2_DATA3__CCMSRCGPCMIX_EARLY_RESET 0x0168 0x0318 0x0000 0x6 0x0 +#define MX93_PAD_SD2_RESET_B__USDHC2_RESET_B 0x016C 0x031C 0x0000 0x0 0x0 +#define MX93_PAD_SD2_RESET_B__LPTMR2_ALT2 0x016C 0x031C 0x040C 0x1 0x1 +#define MX93_PAD_SD2_RESET_B__FLEXIO1_FLEXIO07 0x016C 0x031C 0x0388 0x4 0x1 +#define MX93_PAD_SD2_RESET_B__GPIO3_IO07 0x016C 0x031C 0x0000 0x5 0x0 +#define MX93_PAD_SD2_RESET_B__CCMSRCGPCMIX_SYSTEM_RESET 0x016C 0x031C 0x0000 0x6 0x0 +#define MX93_PAD_I2C1_SCL__LPI2C1_SCL 0x0170 0x0320 0x0000 0x10 0x0 +#define MX93_PAD_I2C1_SCL__I3C1_SCL 0x0170 0x0320 0x0000 0x1 0x0 +#define MX93_PAD_I2C1_SCL__LPUART1_DCB_B 0x0170 0x0320 0x0000 0x2 0x0 +#define MX93_PAD_I2C1_SCL__TPM2_CH0 0x0170 0x0320 0x0000 0x3 0x0 +#define MX93_PAD_I2C1_SCL__GPIO1_IO00 0x0170 0x0320 0x0000 0x5 0x0 +#define MX93_PAD_I2C1_SDA__LPI2C1_SDA 0x0174 0x0324 0x0000 0x10 0x0 +#define MX93_PAD_I2C1_SDA__I3C1_SDA 0x0174 0x0324 0x0000 0x1 0x0 +#define MX93_PAD_I2C1_SDA__LPUART1_RIN_B 0x0174 0x0324 0x0000 0x2 0x0 +#define MX93_PAD_I2C1_SDA__TPM2_CH1 0x0174 0x0324 0x0000 0x3 0x0 +#define MX93_PAD_I2C1_SDA__GPIO1_IO01 0x0174 0x0324 0x0000 0x5 0x0 +#define MX93_PAD_I2C2_SCL__LPI2C2_SCL 0x0178 0x0328 0x0000 0x10 0x0 +#define MX93_PAD_I2C2_SCL__I3C1_PUR 0x0178 0x0328 0x0000 0x1 0x0 +#define MX93_PAD_I2C2_SCL__LPUART2_DCB_B 0x0178 0x0328 0x0000 0x2 0x0 +#define MX93_PAD_I2C2_SCL__TPM2_CH2 0x0178 0x0328 0x0000 0x3 0x0 +#define MX93_PAD_I2C2_SCL__SAI1_RX_SYNC 0x0178 0x0328 0x0000 0x4 0x0 +#define MX93_PAD_I2C2_SCL__GPIO1_IO02 0x0178 0x0328 0x0000 0x5 0x0 +#define MX93_PAD_I2C2_SCL__I3C1_PUR_B 0x0178 0x0328 0x0000 0x6 0x0 +#define MX93_PAD_I2C2_SDA__LPI2C2_SDA 0x017C 0x032C 0x0000 0x10 0x0 +#define MX93_PAD_I2C2_SDA__LPUART2_RIN_B 0x017C 0x032C 0x0000 0x2 0x0 +#define MX93_PAD_I2C2_SDA__TPM2_CH3 0x017C 0x032C 0x0000 0x3 0x0 +#define MX93_PAD_I2C2_SDA__SAI1_RX_BCLK 0x017C 0x032C 0x0000 0x4 0x0 +#define MX93_PAD_I2C2_SDA__GPIO1_IO03 0x017C 0x032C 0x0000 0x5 0x0 +#define MX93_PAD_UART1_RXD__LPUART1_RX 0x0180 0x0330 0x0000 0x0 0x0 +#define MX93_PAD_UART1_RXD__S400_UART_RX 0x0180 0x0330 0x0000 0x1 0x0 +#define MX93_PAD_UART1_RXD__LPSPI2_SIN 0x0180 0x0330 0x0000 0x2 0x0 +#define MX93_PAD_UART1_RXD__TPM1_CH0 0x0180 0x0330 0x0000 0x3 0x0 +#define MX93_PAD_UART1_RXD__GPIO1_IO04 0x0180 0x0330 0x0000 0x5 0x0 +#define MX93_PAD_UART1_TXD__LPUART1_TX 0x0184 0x0334 0x0000 0x0 0x0 +#define MX93_PAD_UART1_TXD__S400_UART_TX 0x0184 0x0334 0x0000 0x1 0x0 +#define MX93_PAD_UART1_TXD__LPSPI2_PCS0 0x0184 0x0334 0x0000 0x2 0x0 +#define MX93_PAD_UART1_TXD__TPM1_CH1 0x0184 0x0334 0x0000 0x3 0x0 +#define MX93_PAD_UART1_TXD__GPIO1_IO05 0x0184 0x0334 0x0000 0x5 0x0 +#define MX93_PAD_UART2_RXD__LPUART2_RX 0x0188 0x0338 0x0000 0x0 0x0 +#define MX93_PAD_UART2_RXD__LPUART1_CTS_B 0x0188 0x0338 0x0000 0x1 0x0 +#define MX93_PAD_UART2_RXD__LPSPI2_SOUT 0x0188 0x0338 0x0000 0x2 0x0 +#define MX93_PAD_UART2_RXD__TPM1_CH2 0x0188 0x0338 0x0000 0x3 0x0 +#define MX93_PAD_UART2_RXD__SAI1_MCLK 0x0188 0x0338 0x0448 0x4 0x0 +#define MX93_PAD_UART2_RXD__GPIO1_IO06 0x0188 0x0338 0x0000 0x5 0x0 +#define MX93_PAD_UART2_TXD__LPUART2_TX 0x018C 0x033C 0x0000 0x0 0x0 +#define MX93_PAD_UART2_TXD__LPUART1_RTS_B 0x018C 0x033C 0x0000 0x1 0x0 +#define MX93_PAD_UART2_TXD__LPSPI2_SCK 0x018C 0x033C 0x0000 0x2 0x0 +#define MX93_PAD_UART2_TXD__TPM1_CH3 0x018C 0x033C 0x0000 0x3 0x0 +#define MX93_PAD_UART2_TXD__GPIO1_IO07 0x018C 0x033C 0x0000 0x5 0x0 +#define MX93_PAD_PDM_CLK__PDM_CLK 0x0190 0x0340 0x0000 0x0 0x0 +#define MX93_PAD_PDM_CLK__MQS1_LEFT 0x0190 0x0340 0x0000 0x1 0x0 +#define MX93_PAD_PDM_CLK__LPTMR1_ALT1 0x0190 0x0340 0x0000 0x4 0x0 +#define MX93_PAD_PDM_CLK__GPIO1_IO08 0x0190 0x0340 0x0000 0x5 0x0 +#define MX93_PAD_PDM_CLK__CAN1_TX 0x0190 0x0340 0x0000 0x6 0x0 +#define MX93_PAD_PDM_BIT_STREAM0__PDM_BIT_STREAM00 0x0194 0x0344 0x0438 0x0 0x2 +#define MX93_PAD_PDM_BIT_STREAM0__MQS1_RIGHT 0x0194 0x0344 0x0000 0x1 0x0 +#define MX93_PAD_PDM_BIT_STREAM0__LPSPI1_PCS1 0x0194 0x0344 0x0000 0x2 0x0 +#define MX93_PAD_PDM_BIT_STREAM0__TPM1_EXTCLK 0x0194 0x0344 0x0000 0x3 0x0 +#define MX93_PAD_PDM_BIT_STREAM0__LPTMR1_ALT2 0x0194 0x0344 0x0000 0x4 0x0 +#define MX93_PAD_PDM_BIT_STREAM0__GPIO1_IO09 0x0194 0x0344 0x0000 0x5 0x0 +#define MX93_PAD_PDM_BIT_STREAM0__CAN1_RX 0x0194 0x0344 0x0360 0x6 0x0 +#define MX93_PAD_PDM_BIT_STREAM1__PDM_BIT_STREAM01 0x0198 0x0348 0x043C 0x0 0x2 +#define MX93_PAD_PDM_BIT_STREAM1__NMI_GLUE_NMI 0x0198 0x0348 0x0000 0x1 0x0 +#define MX93_PAD_PDM_BIT_STREAM1__LPSPI2_PCS1 0x0198 0x0348 0x0000 0x2 0x0 +#define MX93_PAD_PDM_BIT_STREAM1__TPM2_EXTCLK 0x0198 0x0348 0x0000 0x3 0x0 +#define MX93_PAD_PDM_BIT_STREAM1__LPTMR1_ALT3 0x0198 0x0348 0x0000 0x4 0x0 +#define MX93_PAD_PDM_BIT_STREAM1__GPIO1_IO10 0x0198 0x0348 0x0000 0x5 0x0 +#define MX93_PAD_PDM_BIT_STREAM1__CCMSRCGPCMIX_EXT_CLK1 0x0198 0x0348 0x0368 0x6 0x1 +#define MX93_PAD_SAI1_TXFS__SAI1_TX_SYNC 0x019C 0x034C 0x0000 0x0 0x0 +#define MX93_PAD_SAI1_TXFS__SAI1_TX_DATA01 0x019C 0x034C 0x0000 0x1 0x0 +#define MX93_PAD_SAI1_TXFS__LPSPI1_PCS0 0x019C 0x034C 0x0000 0x2 0x0 +#define MX93_PAD_SAI1_TXFS__LPUART2_DTR_B 0x019C 0x034C 0x0000 0x3 0x0 +#define MX93_PAD_SAI1_TXFS__MQS1_LEFT 0x019C 0x034C 0x0000 0x4 0x0 +#define MX93_PAD_SAI1_TXFS__GPIO1_IO11 0x019C 0x034C 0x0000 0x5 0x0 +#define MX93_PAD_SAI1_TXC__SAI1_TX_BCLK 0x01A0 0x0350 0x0000 0x0 0x0 +#define MX93_PAD_SAI1_TXC__LPUART2_CTS_B 0x01A0 0x0350 0x0000 0x1 0x0 +#define MX93_PAD_SAI1_TXC__LPSPI1_SIN 0x01A0 0x0350 0x0000 0x2 0x0 +#define MX93_PAD_SAI1_TXC__LPUART1_DSR_B 0x01A0 0x0350 0x0000 0x3 0x0 +#define MX93_PAD_SAI1_TXC__CAN1_RX 0x01A0 0x0350 0x0360 0x4 0x1 +#define MX93_PAD_SAI1_TXC__GPIO1_IO12 0x01A0 0x0350 0x0000 0x5 0x0 +#define MX93_PAD_SAI1_TXD0__SAI1_TX_DATA00 0x01A4 0x0354 0x0000 0x0 0x0 +#define MX93_PAD_SAI1_TXD0__LPUART2_RTS_B 0x01A4 0x0354 0x0000 0x1 0x0 +#define MX93_PAD_SAI1_TXD0__LPSPI1_SCK 0x01A4 0x0354 0x0000 0x2 0x0 +#define MX93_PAD_SAI1_TXD0__LPUART1_DTR_B 0x01A4 0x0354 0x0000 0x3 0x0 +#define MX93_PAD_SAI1_TXD0__CAN1_TX 0x01A4 0x0354 0x0000 0x4 0x0 +#define MX93_PAD_SAI1_TXD0__GPIO1_IO13 0x01A4 0x0354 0x0000 0x5 0x0 +#define MX93_PAD_SAI1_RXD0__SAI1_RX_DATA00 0x01A8 0x0358 0x0000 0x0 0x0 +#define MX93_PAD_SAI1_RXD0__SAI1_MCLK 0x01A8 0x0358 0x0448 0x1 0x1 +#define MX93_PAD_SAI1_RXD0__LPSPI1_SOUT 0x01A8 0x0358 0x0000 0x2 0x0 +#define MX93_PAD_SAI1_RXD0__LPUART2_DSR_B 0x01A8 0x0358 0x0000 0x3 0x0 +#define MX93_PAD_SAI1_RXD0__MQS1_RIGHT 0x01A8 0x0358 0x0000 0x4 0x0 +#define MX93_PAD_SAI1_RXD0__GPIO1_IO14 0x01A8 0x0358 0x0000 0x5 0x0 +#define MX93_PAD_WDOG_ANY__WDOG1_WDOG_ANY 0x01AC 0x035C 0x0000 0x0 0x0 +#define MX93_PAD_WDOG_ANY__GPIO1_IO15 0x01AC 0x035C 0x0000 0x5 0x0 + +#endif /* __DTS_IMX93_PINFUNC_H */ diff --git a/dts/src/arm64/freescale/imx93.dtsi b/dts/src/arm64/freescale/imx93.dtsi new file mode 100644 index 0000000000..f83a07c7c9 --- /dev/null +++ b/dts/src/arm64/freescale/imx93.dtsi @@ -0,0 +1,334 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 NXP + */ + +#include <dt-bindings/clock/imx93-clock.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +#include "imx93-pinfunc.h" + +/ { + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + mmc0 = &usdhc1; + mmc1 = &usdhc2; + mmc2 = &usdhc3; + serial0 = &lpuart1; + serial1 = &lpuart2; + serial2 = &lpuart3; + serial3 = &lpuart4; + serial4 = &lpuart5; + serial5 = &lpuart6; + serial6 = &lpuart7; + serial7 = &lpuart8; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + A55_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0>; + enable-method = "psci"; + #cooling-cells = <2>; + }; + + A55_1: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x100>; + enable-method = "psci"; + #cooling-cells = <2>; + }; + + }; + + osc_32k: clock-osc-32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "osc_32k"; + }; + + osc_24m: clock-osc-24m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "osc_24m"; + }; + + clk_ext1: clock-ext1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <133000000>; + clock-output-names = "clk_ext1"; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; + clock-frequency = <24000000>; + arm,no-tick-in-suspend; + interrupt-parent = <&gic>; + }; + + gic: interrupt-controller@48000000 { + compatible = "arm,gic-v3"; + reg = <0 0x48000000 0 0x10000>, + <0 0x48040000 0 0xc0000>; + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + }; + + soc@0 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x0 0x80000000>, + <0x28000000 0x0 0x28000000 0x10000000>; + + aips1: bus@44000000 { + compatible = "fsl,aips-bus", "simple-bus"; + reg = <0x44000000 0x800000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mu1: mailbox@44230000 { + compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu"; + reg = <0x44230000 0x10000>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + status = "disabled"; + }; + + system_counter: timer@44290000 { + compatible = "nxp,sysctr-timer"; + reg = <0x44290000 0x30000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc_24m>; + clock-names = "per"; + }; + + lpuart1: serial@44380000 { + compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; + reg = <0x44380000 0x1000>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_LPUART1_GATE>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart2: serial@44390000 { + compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; + reg = <0x44390000 0x1000>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_LPUART2_GATE>; + clock-names = "ipg"; + status = "disabled"; + }; + + iomuxc: pinctrl@443c0000 { + compatible = "fsl,imx93-iomuxc"; + reg = <0x443c0000 0x10000>; + status = "okay"; + }; + + clk: clock-controller@44450000 { + compatible = "fsl,imx93-ccm"; + reg = <0x44450000 0x10000>; + #clock-cells = <1>; + clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>; + clock-names = "osc_32k", "osc_24m", "clk_ext1"; + status = "okay"; + }; + + anatop: anatop@44480000 { + compatible = "fsl,imx93-anatop", "syscon"; + reg = <0x44480000 0x10000>; + }; + }; + + aips2: bus@42000000 { + compatible = "fsl,aips-bus", "simple-bus"; + reg = <0x42000000 0x800000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mu2: mailbox@42440000 { + compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu"; + reg = <0x42440000 0x10000>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + status = "disabled"; + }; + + lpuart3: serial@42570000 { + compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; + reg = <0x42570000 0x1000>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_LPUART3_GATE>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart4: serial@42580000 { + compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; + reg = <0x42580000 0x1000>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_LPUART4_GATE>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart5: serial@42590000 { + compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; + reg = <0x42590000 0x1000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_LPUART5_GATE>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart6: serial@425a0000 { + compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; + reg = <0x425a0000 0x1000>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_LPUART6_GATE>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart7: serial@42690000 { + compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; + reg = <0x42690000 0x1000>; + interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_LPUART7_GATE>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart8: serial@426a0000 { + compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; + reg = <0x426a0000 0x1000>; + interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_LPUART8_GATE>; + clock-names = "ipg"; + status = "disabled"; + }; + }; + + aips3: bus@42800000 { + compatible = "fsl,aips-bus", "simple-bus"; + reg = <0x42800000 0x800000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + usdhc1: mmc@42850000 { + compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc"; + reg = <0x42850000 0x10000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_DUMMY>, + <&clk IMX93_CLK_DUMMY>, + <&clk IMX93_CLK_USDHC1_GATE>; + clock-names = "ipg", "ahb", "per"; + bus-width = <8>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + status = "disabled"; + }; + + usdhc2: mmc@42860000 { + compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc"; + reg = <0x42860000 0x10000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_DUMMY>, + <&clk IMX93_CLK_DUMMY>, + <&clk IMX93_CLK_USDHC2_GATE>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + status = "disabled"; + }; + + usdhc3: mmc@428b0000 { + compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc"; + reg = <0x428b0000 0x10000>; + interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_DUMMY>, + <&clk IMX93_CLK_DUMMY>, + <&clk IMX93_CLK_USDHC3_GATE>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + status = "disabled"; + }; + }; + + gpio2: gpio@43810080 { + compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio"; + reg = <0x43810080 0x1000>, <0x43810040 0x40>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 32 32>; + }; + + gpio3: gpio@43820080 { + compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio"; + reg = <0x43820080 0x1000>, <0x43820040 0x40>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 64 32>; + }; + + gpio4: gpio@43830080 { + compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio"; + reg = <0x43830080 0x1000>, <0x43830040 0x40>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 96 32>; + }; + + gpio1: gpio@47400080 { + compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio"; + reg = <0x47400080 0x1000>, <0x47400040 0x40>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 0 32>; + }; + }; +}; diff --git a/dts/src/arm64/freescale/mba8mx.dtsi b/dts/src/arm64/freescale/mba8mx.dtsi index c2f0f1a156..104bdd4e43 100644 --- a/dts/src/arm64/freescale/mba8mx.dtsi +++ b/dts/src/arm64/freescale/mba8mx.dtsi @@ -16,7 +16,6 @@ }; chosen { - // bootargs = "console=ttymxc2,115200 earlycon=ec_imx6q,0x30880000,115200"; stdout-path = &uart3; }; @@ -26,21 +25,21 @@ pinctrl-0 = <&pinctrl_gpiobutton>; autorepeat; - switch1 { + switch-1 { label = "switch1"; linux,code = <BTN_0>; gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; wakeup-source; }; - btn2: switch2 { + btn2: switch-2 { label = "switch2"; linux,code = <BTN_1>; gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; wakeup-source; }; - switch3 { + switch-3 { label = "switch3"; linux,code = <BTN_2>; gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; @@ -272,7 +271,6 @@ status = "okay"; }; -/* UART4 is assigned to Cortex-M4 */ &usdhc2 { pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; diff --git a/dts/src/arm64/hisilicon/hi3660-hikey960.dts b/dts/src/arm64/hisilicon/hi3660-hikey960.dts index f68580dc87..0192a01bf8 100644 --- a/dts/src/arm64/hisilicon/hi3660-hikey960.dts +++ b/dts/src/arm64/hisilicon/hi3660-hikey960.dts @@ -49,9 +49,9 @@ ramoops@32000000 { compatible = "ramoops"; reg = <0x0 0x32000000 0x0 0x00100000>; - record-size = <0x00020000>; - console-size = <0x00020000>; - ftrace-size = <0x00020000>; + record-size = <0x00020000>; + console-size = <0x00020000>; + ftrace-size = <0x00020000>; }; }; @@ -63,9 +63,9 @@ compatible = "syscon-reboot-mode"; offset = <0x0>; - mode-normal = <0x77665501>; - mode-bootloader = <0x77665500>; - mode-recovery = <0x77665502>; + mode-normal = <0x77665501>; + mode-bootloader = <0x77665500>; + mode-recovery = <0x77665502>; }; }; @@ -74,7 +74,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pwr_key_pmx_func &pwr_key_cfg_func>; - power { + key-power { wakeup-source; gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; label = "GPIO Power"; diff --git a/dts/src/arm64/hisilicon/hi3660.dtsi b/dts/src/arm64/hisilicon/hi3660.dtsi index 6b3057a092..8343d0cedd 100644 --- a/dts/src/arm64/hisilicon/hi3660.dtsi +++ b/dts/src/arm64/hisilicon/hi3660.dtsi @@ -479,7 +479,7 @@ reg = <0x0 0xfdf00000 0x0 0x1000>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; dma-names = "rx", "tx"; - dmas = <&dma0 2 &dma0 3>; + dmas = <&dma0 2 &dma0 3>; clocks = <&crg_ctrl HI3660_CLK_GATE_UART1>, <&crg_ctrl HI3660_CLK_GATE_UART1>; clock-names = "uartclk", "apb_pclk"; @@ -493,7 +493,7 @@ reg = <0x0 0xfdf03000 0x0 0x1000>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; dma-names = "rx", "tx"; - dmas = <&dma0 4 &dma0 5>; + dmas = <&dma0 4 &dma0 5>; clocks = <&crg_ctrl HI3660_CLK_GATE_UART2>, <&crg_ctrl HI3660_PCLK>; clock-names = "uartclk", "apb_pclk"; @@ -519,7 +519,7 @@ reg = <0x0 0xfdf01000 0x0 0x1000>; interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; dma-names = "rx", "tx"; - dmas = <&dma0 6 &dma0 7>; + dmas = <&dma0 6 &dma0 7>; clocks = <&crg_ctrl HI3660_CLK_GATE_UART4>, <&crg_ctrl HI3660_CLK_GATE_UART4>; clock-names = "uartclk", "apb_pclk"; @@ -533,7 +533,7 @@ reg = <0x0 0xfdf05000 0x0 0x1000>; interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; dma-names = "rx", "tx"; - dmas = <&dma0 8 &dma0 9>; + dmas = <&dma0 8 &dma0 9>; clocks = <&crg_ctrl HI3660_CLK_GATE_UART5>, <&crg_ctrl HI3660_CLK_GATE_UART5>; clock-names = "uartclk", "apb_pclk"; diff --git a/dts/src/arm64/hisilicon/hi3670.dtsi b/dts/src/arm64/hisilicon/hi3670.dtsi index 3125c3869c..886b93c589 100644 --- a/dts/src/arm64/hisilicon/hi3670.dtsi +++ b/dts/src/arm64/hisilicon/hi3670.dtsi @@ -324,7 +324,7 @@ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; #gpio-cells = <2>; - gpio-ranges = <&pmx0 0 13 4 &pmx0 7 17 1>; + gpio-ranges = <&pmx0 0 13 4 &pmx0 7 17 1>; interrupt-controller; #interrupt-cells = <2>; clocks = <&crg_ctrl HI3670_PCLK_GPIO3>; diff --git a/dts/src/arm64/hisilicon/hi6220-hikey.dts b/dts/src/arm64/hisilicon/hi6220-hikey.dts index 3df2afb2f6..629e604aa2 100644 --- a/dts/src/arm64/hisilicon/hi6220-hikey.dts +++ b/dts/src/arm64/hisilicon/hi6220-hikey.dts @@ -54,9 +54,9 @@ ramoops@21f00000 { compatible = "ramoops"; reg = <0x0 0x21f00000 0x0 0x00100000>; - record-size = <0x00020000>; - console-size = <0x00020000>; - ftrace-size = <0x00020000>; + record-size = <0x00020000>; + console-size = <0x00020000>; + ftrace-size = <0x00020000>; }; /* global autoconfigured region for contiguous allocations */ @@ -76,9 +76,9 @@ compatible = "syscon-reboot-mode"; offset = <0x0>; - mode-normal = <0x77665501>; - mode-bootloader = <0x77665500>; - mode-recovery = <0x77665502>; + mode-normal = <0x77665501>; + mode-bootloader = <0x77665500>; + mode-recovery = <0x77665502>; }; }; diff --git a/dts/src/arm64/hisilicon/hip05-d02.dts b/dts/src/arm64/hisilicon/hip05-d02.dts index 40f3e00ac8..c4eaebbb44 100644 --- a/dts/src/arm64/hisilicon/hip05-d02.dts +++ b/dts/src/arm64/hisilicon/hip05-d02.dts @@ -27,12 +27,10 @@ stdout-path = "serial0:115200n8"; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - pwrbutton { + pwr-button { label = "Power Button"; gpios = <&porta 8 GPIO_ACTIVE_LOW>; linux,code = <116>; diff --git a/dts/src/arm64/hisilicon/hip06.dtsi b/dts/src/arm64/hisilicon/hip06.dtsi index 70d7732dd3..2f8b03b0d3 100644 --- a/dts/src/arm64/hisilicon/hip06.dtsi +++ b/dts/src/arm64/hisilicon/hip06.dtsi @@ -537,7 +537,7 @@ port@1 { reg = <1>; - serdes-syscon= <&serdes_ctrl>; + serdes-syscon = <&serdes_ctrl>; port-rst-offset = <1>; port-mode-offset = <1>; media-type = "fiber"; @@ -546,7 +546,7 @@ port@4 { reg = <4>; phy-handle = <&phy0>; - serdes-syscon= <&serdes_ctrl>; + serdes-syscon = <&serdes_ctrl>; port-rst-offset = <4>; port-mode-offset = <2>; media-type = "copper"; @@ -555,7 +555,7 @@ port@5 { reg = <5>; phy-handle = <&phy1>; - serdes-syscon= <&serdes_ctrl>; + serdes-syscon = <&serdes_ctrl>; port-rst-offset = <5>; port-mode-offset = <3>; media-type = "copper"; diff --git a/dts/src/arm64/hisilicon/hip07.dtsi b/dts/src/arm64/hisilicon/hip07.dtsi index 6baf6a6864..1a16662f88 100644 --- a/dts/src/arm64/hisilicon/hip07.dtsi +++ b/dts/src/arm64/hisilicon/hip07.dtsi @@ -1422,7 +1422,7 @@ port@1 { reg = <1>; - serdes-syscon= <&serdes_ctrl>; + serdes-syscon = <&serdes_ctrl>; cpld-syscon = <&dsa_cpld 0x4>; port-rst-offset = <1>; port-mode-offset = <1>; @@ -1433,7 +1433,7 @@ port@4 { reg = <4>; phy-handle = <&phy0>; - serdes-syscon= <&serdes_ctrl>; + serdes-syscon = <&serdes_ctrl>; port-rst-offset = <4>; port-mode-offset = <2>; mc-mac-mask = [ff f0 00 00 00 00]; @@ -1443,7 +1443,7 @@ port@5 { reg = <5>; phy-handle = <&phy1>; - serdes-syscon= <&serdes_ctrl>; + serdes-syscon = <&serdes_ctrl>; port-rst-offset = <5>; port-mode-offset = <3>; mc-mac-mask = [ff f0 00 00 00 00]; diff --git a/dts/src/arm64/intel/socfpga_agilex.dtsi b/dts/src/arm64/intel/socfpga_agilex.dtsi index caccb0334a..7bbec8aafa 100644 --- a/dts/src/arm64/intel/socfpga_agilex.dtsi +++ b/dts/src/arm64/intel/socfpga_agilex.dtsi @@ -581,7 +581,7 @@ sdramedac { compatible = "altr,sdram-edac-s10"; altr,sdr-syscon = <&sdr>; - interrupts = <16 4>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH>; }; ocram-ecc@ff8cc000 { @@ -589,7 +589,7 @@ "altr,socfpga-a10-ocram-ecc"; reg = <0xff8cc000 0x100>; altr,ecc-parent = <&ocram>; - interrupts = <1 4>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; }; usb0-ecc@ff8c4000 { @@ -597,7 +597,7 @@ "altr,socfpga-usb-ecc"; reg = <0xff8c4000 0x100>; altr,ecc-parent = <&usb0>; - interrupts = <2 4>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; }; emac0-rx-ecc@ff8c0000 { @@ -605,7 +605,7 @@ "altr,socfpga-eth-mac-ecc"; reg = <0xff8c0000 0x100>; altr,ecc-parent = <&gmac0>; - interrupts = <4 4>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; }; emac0-tx-ecc@ff8c0400 { @@ -613,7 +613,7 @@ "altr,socfpga-eth-mac-ecc"; reg = <0xff8c0400 0x100>; altr,ecc-parent = <&gmac0>; - interrupts = <5 4>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; }; sdmmca-ecc@ff8c8c00 { @@ -621,8 +621,8 @@ "altr,socfpga-sdmmc-ecc"; reg = <0xff8c8c00 0x100>; altr,ecc-parent = <&mmc>; - interrupts = <14 4>, - <15 4>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>, + <15 IRQ_TYPE_LEVEL_HIGH>; }; }; diff --git a/dts/src/arm64/lg/lg1312.dtsi b/dts/src/arm64/lg/lg1312.dtsi index bec97480a9..78ae73d0cf 100644 --- a/dts/src/arm64/lg/lg1312.dtsi +++ b/dts/src/arm64/lg/lg1312.dtsi @@ -52,7 +52,7 @@ }; psci { - compatible = "arm,psci-0.2", "arm,psci"; + compatible = "arm,psci-0.2", "arm,psci"; method = "smc"; cpu_suspend = <0x84000001>; cpu_off = <0x84000002>; @@ -150,7 +150,7 @@ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; uart1: serial@fe100000 { compatible = "arm,pl011", "arm,primecell"; @@ -158,7 +158,7 @@ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; uart2: serial@fe200000 { compatible = "arm,pl011", "arm,primecell"; @@ -166,7 +166,7 @@ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; spi0: spi@fe800000 { compatible = "arm,pl022", "arm,primecell"; @@ -197,7 +197,7 @@ reg = <0x0 0xfd400000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio1: gpio@fd410000 { #gpio-cells = <2>; @@ -206,7 +206,7 @@ reg = <0x0 0xfd410000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio2: gpio@fd420000 { #gpio-cells = <2>; @@ -215,7 +215,7 @@ reg = <0x0 0xfd420000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio3: gpio@fd430000 { #gpio-cells = <2>; @@ -232,7 +232,7 @@ reg = <0x0 0xfd440000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio5: gpio@fd450000 { #gpio-cells = <2>; @@ -241,7 +241,7 @@ reg = <0x0 0xfd450000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio6: gpio@fd460000 { #gpio-cells = <2>; @@ -250,7 +250,7 @@ reg = <0x0 0xfd460000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio7: gpio@fd470000 { #gpio-cells = <2>; @@ -259,7 +259,7 @@ reg = <0x0 0xfd470000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio8: gpio@fd480000 { #gpio-cells = <2>; @@ -268,7 +268,7 @@ reg = <0x0 0xfd480000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio9: gpio@fd490000 { #gpio-cells = <2>; @@ -277,7 +277,7 @@ reg = <0x0 0xfd490000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio10: gpio@fd4a0000 { #gpio-cells = <2>; @@ -286,7 +286,7 @@ reg = <0x0 0xfd4a0000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio11: gpio@fd4b0000 { #gpio-cells = <2>; @@ -303,7 +303,7 @@ reg = <0x0 0xfd4c0000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio13: gpio@fd4d0000 { #gpio-cells = <2>; @@ -312,7 +312,7 @@ reg = <0x0 0xfd4d0000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio14: gpio@fd4e0000 { #gpio-cells = <2>; @@ -321,7 +321,7 @@ reg = <0x0 0xfd4e0000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio15: gpio@fd4f0000 { #gpio-cells = <2>; @@ -330,7 +330,7 @@ reg = <0x0 0xfd4f0000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio16: gpio@fd500000 { #gpio-cells = <2>; @@ -339,7 +339,7 @@ reg = <0x0 0xfd500000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio17: gpio@fd510000 { #gpio-cells = <2>; diff --git a/dts/src/arm64/lg/lg1313.dtsi b/dts/src/arm64/lg/lg1313.dtsi index ada3d4dc63..2173316573 100644 --- a/dts/src/arm64/lg/lg1313.dtsi +++ b/dts/src/arm64/lg/lg1313.dtsi @@ -52,7 +52,7 @@ }; psci { - compatible = "arm,psci-0.2", "arm,psci"; + compatible = "arm,psci-0.2", "arm,psci"; method = "smc"; cpu_suspend = <0x84000001>; cpu_off = <0x84000002>; @@ -150,7 +150,7 @@ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; uart1: serial@fe100000 { compatible = "arm,pl011", "arm,primecell"; @@ -158,7 +158,7 @@ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; uart2: serial@fe200000 { compatible = "arm,pl011", "arm,primecell"; @@ -166,7 +166,7 @@ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; spi0: spi@fe800000 { compatible = "arm,pl022", "arm,primecell"; @@ -197,7 +197,7 @@ reg = <0x0 0xfd400000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio1: gpio@fd410000 { #gpio-cells = <2>; @@ -206,7 +206,7 @@ reg = <0x0 0xfd410000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio2: gpio@fd420000 { #gpio-cells = <2>; @@ -215,7 +215,7 @@ reg = <0x0 0xfd420000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio3: gpio@fd430000 { #gpio-cells = <2>; @@ -232,7 +232,7 @@ reg = <0x0 0xfd440000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio5: gpio@fd450000 { #gpio-cells = <2>; @@ -241,7 +241,7 @@ reg = <0x0 0xfd450000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio6: gpio@fd460000 { #gpio-cells = <2>; @@ -250,7 +250,7 @@ reg = <0x0 0xfd460000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio7: gpio@fd470000 { #gpio-cells = <2>; @@ -259,7 +259,7 @@ reg = <0x0 0xfd470000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio8: gpio@fd480000 { #gpio-cells = <2>; @@ -268,7 +268,7 @@ reg = <0x0 0xfd480000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio9: gpio@fd490000 { #gpio-cells = <2>; @@ -277,7 +277,7 @@ reg = <0x0 0xfd490000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio10: gpio@fd4a0000 { #gpio-cells = <2>; @@ -286,7 +286,7 @@ reg = <0x0 0xfd4a0000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio11: gpio@fd4b0000 { #gpio-cells = <2>; @@ -303,7 +303,7 @@ reg = <0x0 0xfd4c0000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio13: gpio@fd4d0000 { #gpio-cells = <2>; @@ -312,7 +312,7 @@ reg = <0x0 0xfd4d0000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio14: gpio@fd4e0000 { #gpio-cells = <2>; @@ -321,7 +321,7 @@ reg = <0x0 0xfd4e0000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio15: gpio@fd4f0000 { #gpio-cells = <2>; @@ -330,7 +330,7 @@ reg = <0x0 0xfd4f0000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio16: gpio@fd500000 { #gpio-cells = <2>; @@ -339,7 +339,7 @@ reg = <0x0 0xfd500000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio17: gpio@fd510000 { #gpio-cells = <2>; diff --git a/dts/src/arm64/marvell/ac5-98dx25xx.dtsi b/dts/src/arm64/marvell/ac5-98dx25xx.dtsi new file mode 100644 index 0000000000..80b44c7df5 --- /dev/null +++ b/dts/src/arm64/marvell/ac5-98dx25xx.dtsi @@ -0,0 +1,291 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree For AC5. + * + * Copyright (C) 2021 Marvell + * Copyright (C) 2022 Allied Telesis Labs + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + model = "Marvell AC5 SoC"; + compatible = "marvell,ac5"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + }; + }; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x100>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + l2: l2-cache { + compatible = "cache"; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 12 IRQ_TYPE_LEVEL_HIGH>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + dma-ranges; + + internal-regs@7f000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + /* 16M internal register @ 0x7f00_0000 */ + ranges = <0x0 0x0 0x7f000000 0x1000000>; + dma-coherent; + + uart0: serial@12000 { + compatible = "snps,dw-apb-uart"; + reg = <0x12000 0x100>; + reg-shift = <2>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clocks = <&cnm_clock>; + status = "okay"; + }; + + mdio: mdio@22004 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,orion-mdio"; + reg = <0x22004 0x4>; + clocks = <&cnm_clock>; + }; + + i2c0: i2c@11000{ + compatible = "marvell,mv78230-i2c"; + reg = <0x11000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + + clocks = <&cnm_clock>; + clock-names = "core"; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency=<100000>; + + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&i2c0_pins>; + pinctrl-1 = <&i2c0_gpio>; + scl_gpio = <&gpio0 26 GPIO_ACTIVE_HIGH>; + sda_gpio = <&gpio0 27 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; + + i2c1: i2c@11100{ + compatible = "marvell,mv78230-i2c"; + reg = <0x11100 0x20>; + #address-cells = <1>; + #size-cells = <0>; + + clocks = <&cnm_clock>; + clock-names = "core"; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency=<100000>; + + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&i2c1_pins>; + pinctrl-1 = <&i2c1_gpio>; + scl_gpio = <&gpio0 20 GPIO_ACTIVE_HIGH>; + sda_gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; + + gpio0: gpio@18100 { + compatible = "marvell,orion-gpio"; + reg = <0x18100 0x40>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl0 0 0 32>; + marvell,pwm-offset = <0x1f0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + }; + + gpio1: gpio@18140 { + reg = <0x18140 0x40>; + compatible = "marvell,orion-gpio"; + ngpios = <14>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl0 0 32 14>; + marvell,pwm-offset = <0x1f0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + /* + * Dedicated section for devices behind 32bit controllers so we + * can configure specific DMA mapping for them + */ + behind-32bit-controller@7f000000 { + compatible = "simple-bus"; + #address-cells = <0x2>; + #size-cells = <0x2>; + ranges = <0x0 0x0 0x0 0x7f000000 0x0 0x1000000>; + /* Host phy ram starts at 0x200M */ + dma-ranges = <0x0 0x0 0x2 0x0 0x1 0x0>; + dma-coherent; + + eth0: ethernet@20000 { + compatible = "marvell,armada-ac5-neta"; + reg = <0x0 0x20000 0x0 0x4000>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cnm_clock>; + phy-mode = "sgmii"; + status = "disabled"; + }; + + eth1: ethernet@24000 { + compatible = "marvell,armada-ac5-neta"; + reg = <0x0 0x24000 0x0 0x4000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cnm_clock>; + phy-mode = "sgmii"; + status = "disabled"; + }; + + usb0: usb@80000 { + compatible = "marvell,orion-ehci"; + reg = <0x0 0x80000 0x0 0x500>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + usb1: usb@a0000 { + compatible = "marvell,orion-ehci"; + reg = <0x0 0xa0000 0x0 0x500>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + pinctrl0: pinctrl@80020100 { + compatible = "marvell,ac5-pinctrl"; + reg = <0 0x80020100 0 0x20>; + + i2c0_pins: i2c0-pins { + marvell,pins = "mpp26", "mpp27"; + marvell,function = "i2c0"; + }; + + i2c0_gpio: i2c0-gpio-pins { + marvell,pins = "mpp26", "mpp27"; + marvell,function = "gpio"; + }; + + i2c1_pins: i2c1-pins { + marvell,pins = "mpp20", "mpp21"; + marvell,function = "i2c1"; + }; + + i2c1_gpio: i2c1-gpio-pins { + marvell,pins = "mpp20", "mpp21"; + marvell,function = "i2c1"; + }; + }; + + spi0: spi@805a0000 { + compatible = "marvell,armada-3700-spi"; + reg = <0x0 0x805a0000 0x0 0x50>; + #address-cells = <0x1>; + #size-cells = <0x0>; + clocks = <&spi_clock>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + num-cs = <1>; + status = "disabled"; + }; + + spi1: spi@805a8000 { + compatible = "marvell,armada-3700-spi"; + reg = <0x0 0x805a8000 0x0 0x50>; + #address-cells = <0x1>; + #size-cells = <0x0>; + clocks = <&spi_clock>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + num-cs = <1>; + status = "disabled"; + }; + + gic: interrupt-controller@80600000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x80600000 0x0 0x10000>, /* GICD */ + <0x0 0x80660000 0x0 0x40000>; /* GICR */ + interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + clocks { + cnm_clock: cnm-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <328000000>; + }; + + spi_clock: spi-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + }; +}; diff --git a/dts/src/arm64/marvell/ac5-98dx35xx-rd.dts b/dts/src/arm64/marvell/ac5-98dx35xx-rd.dts new file mode 100644 index 0000000000..f0ebdb84ee --- /dev/null +++ b/dts/src/arm64/marvell/ac5-98dx35xx-rd.dts @@ -0,0 +1,101 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree For RD-AC5X. + * + * Copyright (C) 2021 Marvell + * Copyright (C) 2022 Allied Telesis Labs + */ +/* + * Device Tree file for Marvell Alleycat 5X development board + * This board file supports the B configuration of the board + */ + +/dts-v1/; + +#include "ac5-98dx35xx.dtsi" + +/ { + model = "Marvell RD-AC5X Board"; + compatible = "marvell,rd-ac5x", "marvell,ac5x", "marvell,ac5"; + + aliases { + serial0 = &uart0; + spiflash0 = &spiflash0; + gpio0 = &gpio0; + gpio1 = &gpio1; + ethernet0 = ð0; + ethernet1 = ð1; + }; + + memory@0 { + device_type = "memory"; + reg = <0x2 0x00000000 0x0 0x40000000>; + }; + + usb1phy: usb-phy { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; +}; + +&mdio { + phy0: ethernet-phy@0 { + reg = <0>; + }; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +ð0 { + status = "okay"; + phy-handle = <&phy0>; +}; + +/* USB0 is a host USB */ +&usb0 { + status = "okay"; +}; + +/* USB1 is a peripheral USB */ +&usb1 { + status = "okay"; + phys = <&usb1phy>; + phy-names = "usb-phy"; + dr_mode = "peripheral"; +}; + +&spi0 { + status = "okay"; + + spiflash0: flash@0 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + spi-tx-bus-width = <1>; /* 1-single, 2-dual, 4-quad */ + spi-rx-bus-width = <1>; /* 1-single, 2-dual, 4-quad */ + reg = <0>; + + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "spi_flash_part0"; + reg = <0x0 0x800000>; + }; + + parition@1 { + label = "spi_flash_part1"; + reg = <0x800000 0x700000>; + }; + + parition@2 { + label = "spi_flash_part2"; + reg = <0xF00000 0x100000>; + }; + }; +}; diff --git a/dts/src/arm64/marvell/ac5-98dx35xx.dtsi b/dts/src/arm64/marvell/ac5-98dx35xx.dtsi new file mode 100644 index 0000000000..2ab72f854b --- /dev/null +++ b/dts/src/arm64/marvell/ac5-98dx35xx.dtsi @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree For AC5X. + * + * Copyright (C) 2022 Allied Telesis Labs + */ + +#include "ac5-98dx25xx.dtsi" + +/ { + model = "Marvell AC5X SoC"; + compatible = "marvell,ac5x", "marvell,ac5"; +}; + +&cnm_clock { + clock-frequency = <325000000>; +}; diff --git a/dts/src/arm64/marvell/armada-3720-turris-mox.dts b/dts/src/arm64/marvell/armada-3720-turris-mox.dts index caf9c8529f..ada164d423 100644 --- a/dts/src/arm64/marvell/armada-3720-turris-mox.dts +++ b/dts/src/arm64/marvell/armada-3720-turris-mox.dts @@ -35,7 +35,7 @@ leds { compatible = "gpio-leds"; - red { + led { label = "mox:red:activity"; gpios = <&gpiosb 21 GPIO_ACTIVE_LOW>; linux,default-trigger = "default-on"; @@ -45,7 +45,7 @@ gpio-keys { compatible = "gpio-keys"; - reset { + key-reset { label = "reset"; linux,code = <KEY_RESTART>; gpios = <&gpiosb 20 GPIO_ACTIVE_LOW>; @@ -100,11 +100,11 @@ sfp: sfp { compatible = "sff,sfp"; i2c-bus = <&i2c0>; - los-gpio = <&moxtet_sfp 0 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&moxtet_sfp 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&moxtet_sfp 2 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&moxtet_sfp 4 GPIO_ACTIVE_HIGH>; - rate-select0-gpio = <&moxtet_sfp 5 GPIO_ACTIVE_HIGH>; + los-gpios = <&moxtet_sfp 0 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&moxtet_sfp 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&moxtet_sfp 2 GPIO_ACTIVE_LOW>; + tx-disable-gpios = <&moxtet_sfp 4 GPIO_ACTIVE_HIGH>; + rate-select0-gpios = <&moxtet_sfp 5 GPIO_ACTIVE_HIGH>; maximum-power-milliwatt = <3000>; /* enabled by U-Boot if SFP module is present */ diff --git a/dts/src/arm64/marvell/armada-3720-uDPU.dts b/dts/src/arm64/marvell/armada-3720-uDPU.dts index a35317d24d..b20c8e7d92 100644 --- a/dts/src/arm64/marvell/armada-3720-uDPU.dts +++ b/dts/src/arm64/marvell/armada-3720-uDPU.dts @@ -65,20 +65,20 @@ sfp_eth0: sfp-eth0 { compatible = "sff,sfp"; i2c-bus = <&i2c0>; - los-gpio = <&gpiosb 2 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&gpiosb 3 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&gpiosb 4 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&gpiosb 5 GPIO_ACTIVE_HIGH>; + los-gpios = <&gpiosb 2 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>; + tx-disable-gpios = <&gpiosb 4 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&gpiosb 5 GPIO_ACTIVE_HIGH>; maximum-power-milliwatt = <3000>; }; sfp_eth1: sfp-eth1 { compatible = "sff,sfp"; i2c-bus = <&i2c1>; - los-gpio = <&gpiosb 7 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&gpiosb 8 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&gpiosb 9 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&gpiosb 10 GPIO_ACTIVE_HIGH>; + los-gpios = <&gpiosb 7 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&gpiosb 8 GPIO_ACTIVE_LOW>; + tx-disable-gpios = <&gpiosb 9 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&gpiosb 10 GPIO_ACTIVE_HIGH>; maximum-power-milliwatt = <3000>; }; }; diff --git a/dts/src/arm64/marvell/armada-7040-mochabin.dts b/dts/src/arm64/marvell/armada-7040-mochabin.dts index 39a8e5e99d..7ca71f2d7a 100644 --- a/dts/src/arm64/marvell/armada-7040-mochabin.dts +++ b/dts/src/arm64/marvell/armada-7040-mochabin.dts @@ -34,20 +34,20 @@ sfp_eth0: sfp-eth0 { compatible = "sff,sfp"; i2c-bus = <&cp0_i2c1>; - los-gpio = <&sfp_gpio 3 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&sfp_gpio 2 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&sfp_gpio 1 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&sfp_gpio 0 GPIO_ACTIVE_HIGH>; + los-gpios = <&sfp_gpio 3 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sfp_gpio 2 GPIO_ACTIVE_LOW>; + tx-disable-gpios = <&sfp_gpio 1 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&sfp_gpio 0 GPIO_ACTIVE_HIGH>; }; /* SFP 1G */ sfp_eth2: sfp-eth2 { compatible = "sff,sfp"; i2c-bus = <&cp0_i2c0>; - los-gpio = <&sfp_gpio 7 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&sfp_gpio 6 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&sfp_gpio 5 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&sfp_gpio 4 GPIO_ACTIVE_HIGH>; + los-gpios = <&sfp_gpio 7 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sfp_gpio 6 GPIO_ACTIVE_LOW>; + tx-disable-gpios = <&sfp_gpio 5 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&sfp_gpio 4 GPIO_ACTIVE_HIGH>; }; }; diff --git a/dts/src/arm64/marvell/armada-8040-clearfog-gt-8k.dts b/dts/src/arm64/marvell/armada-8040-clearfog-gt-8k.dts index 871f84b4a6..4125202028 100644 --- a/dts/src/arm64/marvell/armada-8040-clearfog-gt-8k.dts +++ b/dts/src/arm64/marvell/armada-8040-clearfog-gt-8k.dts @@ -64,8 +64,8 @@ sfp_cp0_eth0: sfp-cp0-eth0 { compatible = "sff,sfp"; i2c-bus = <&cp0_i2c1>; - mod-def0-gpio = <&cp0_gpio2 17 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&cp0_gpio2 17 GPIO_ACTIVE_LOW>; + tx-disable-gpios = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&cp0_sfp_present_pins &cp1_sfp_tx_disable_pins>; maximum-power-milliwatt = <2000>; @@ -94,7 +94,7 @@ pinctrl-0 = <&cp0_gpio_reset_pins &cp1_wps_button_pins>; pinctrl-names = "default"; - button_0 { + button-0 { /* The rear button */ label = "Rear Button"; gpios = <&cp0_gpio2 7 GPIO_ACTIVE_LOW>; @@ -102,7 +102,7 @@ linux,code = <BTN_0>; }; - button_1 { + button-1 { /* The wps button */ label = "WPS Button"; gpios = <&cp1_gpio1 30 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm64/marvell/armada-8040-mcbin.dtsi b/dts/src/arm64/marvell/armada-8040-mcbin.dtsi index 779cf167c3..ca1aeb69a8 100644 --- a/dts/src/arm64/marvell/armada-8040-mcbin.dtsi +++ b/dts/src/arm64/marvell/armada-8040-mcbin.dtsi @@ -65,10 +65,10 @@ /* CON15,16 - CPM lane 4 */ compatible = "sff,sfp"; i2c-bus = <&sfpp0_i2c>; - los-gpio = <&cp1_gpio1 28 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&cp1_gpio1 27 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>; + los-gpios = <&cp1_gpio1 28 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&cp1_gpio1 27 GPIO_ACTIVE_LOW>; + tx-disable-gpios = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&cp1_sfpp0_pins>; maximum-power-milliwatt = <2000>; @@ -78,10 +78,10 @@ /* CON17,18 - CPS lane 4 */ compatible = "sff,sfp"; i2c-bus = <&sfpp1_i2c>; - los-gpio = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&cp1_gpio1 11 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&cp1_gpio1 10 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&cp0_gpio2 30 GPIO_ACTIVE_HIGH>; + los-gpios = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&cp1_gpio1 11 GPIO_ACTIVE_LOW>; + tx-disable-gpios = <&cp1_gpio1 10 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&cp0_gpio2 30 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&cp1_sfpp1_pins &cp0_sfpp1_pins>; maximum-power-milliwatt = <2000>; @@ -91,10 +91,10 @@ /* CON13,14 - CPS lane 5 */ compatible = "sff,sfp"; i2c-bus = <&sfp_1g_i2c>; - los-gpio = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&cp0_gpio2 21 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&cp1_gpio1 24 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&cp0_gpio2 19 GPIO_ACTIVE_HIGH>; + los-gpios = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&cp0_gpio2 21 GPIO_ACTIVE_LOW>; + tx-disable-gpios = <&cp1_gpio1 24 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&cp0_gpio2 19 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&cp0_sfp_1g_pins &cp1_sfp_1g_pins>; maximum-power-milliwatt = <2000>; diff --git a/dts/src/arm64/marvell/armada-8040-puzzle-m801.dts b/dts/src/arm64/marvell/armada-8040-puzzle-m801.dts index 74bed79e4f..eb04735039 100644 --- a/dts/src/arm64/marvell/armada-8040-puzzle-m801.dts +++ b/dts/src/arm64/marvell/armada-8040-puzzle-m801.dts @@ -67,20 +67,20 @@ sfp_cp0_eth0: sfp-cp0-eth0 { compatible = "sff,sfp"; i2c-bus = <&sfpplus0_i2c>; - los-gpio = <&sfpplus_gpio 11 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&sfpplus_gpio 10 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&sfpplus_gpio 9 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&sfpplus_gpio 8 GPIO_ACTIVE_HIGH>; + los-gpios = <&sfpplus_gpio 11 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sfpplus_gpio 10 GPIO_ACTIVE_LOW>; + tx-disable-gpios = <&sfpplus_gpio 9 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&sfpplus_gpio 8 GPIO_ACTIVE_HIGH>; maximum-power-milliwatt = <3000>; }; sfp_cp1_eth0: sfp-cp1-eth0 { compatible = "sff,sfp"; i2c-bus = <&sfpplus1_i2c>; - los-gpio = <&sfpplus_gpio 3 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&sfpplus_gpio 2 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&sfpplus_gpio 1 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&sfpplus_gpio 0 GPIO_ACTIVE_HIGH>; + los-gpios = <&sfpplus_gpio 3 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sfpplus_gpio 2 GPIO_ACTIVE_LOW>; + tx-disable-gpios = <&sfpplus_gpio 1 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&sfpplus_gpio 0 GPIO_ACTIVE_HIGH>; maximum-power-milliwatt = <3000>; }; diff --git a/dts/src/arm64/marvell/cn9130-crb.dtsi b/dts/src/arm64/marvell/cn9130-crb.dtsi index 1acd746284..8e4ec243fb 100644 --- a/dts/src/arm64/marvell/cn9130-crb.dtsi +++ b/dts/src/arm64/marvell/cn9130-crb.dtsi @@ -78,9 +78,9 @@ compatible = "sff,sfp"; i2c-bus = <&cp0_i2c1>; mod-def0-gpios = <&expander0 3 GPIO_ACTIVE_LOW>; - los-gpio = <&expander0 15 GPIO_ACTIVE_HIGH>; - tx-disable-gpio = <&expander0 2 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&cp0_gpio1 24 GPIO_ACTIVE_HIGH>; + los-gpios = <&expander0 15 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&expander0 2 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&cp0_gpio1 24 GPIO_ACTIVE_HIGH>; maximum-power-milliwatt = <3000>; status = "okay"; }; diff --git a/dts/src/arm64/marvell/cn9130-db.dtsi b/dts/src/arm64/marvell/cn9130-db.dtsi index 7e20987253..c7de1ea0d4 100644 --- a/dts/src/arm64/marvell/cn9130-db.dtsi +++ b/dts/src/arm64/marvell/cn9130-db.dtsi @@ -90,10 +90,10 @@ cp0_sfp_eth0: sfp-eth@0 { compatible = "sff,sfp"; i2c-bus = <&cp0_sfpp0_i2c>; - los-gpio = <&cp0_module_expander1 11 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&cp0_module_expander1 10 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&cp0_module_expander1 9 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&cp0_module_expander1 8 GPIO_ACTIVE_HIGH>; + los-gpios = <&cp0_module_expander1 11 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&cp0_module_expander1 10 GPIO_ACTIVE_LOW>; + tx-disable-gpios = <&cp0_module_expander1 9 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&cp0_module_expander1 8 GPIO_ACTIVE_HIGH>; /* * SFP cages are unconnected on early PCBs because of an the I2C * lanes not being connected. Prevent the port for being @@ -404,7 +404,7 @@ &cp0_usb3_1 { status = "okay"; usb-phy = <&cp0_usb3_0_phy1>; - phys = <&cp0_utmi1>; + phys = <&cp0_utmi1>; phy-names = "utmi"; dr_mode = "host"; }; diff --git a/dts/src/arm64/marvell/cn9131-db.dtsi b/dts/src/arm64/marvell/cn9131-db.dtsi index b7fc241a22..ff8422fae3 100644 --- a/dts/src/arm64/marvell/cn9131-db.dtsi +++ b/dts/src/arm64/marvell/cn9131-db.dtsi @@ -37,10 +37,10 @@ cp1_sfp_eth1: sfp-eth1 { compatible = "sff,sfp"; i2c-bus = <&cp1_i2c0>; - los-gpio = <&cp1_gpio1 11 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&cp1_gpio1 10 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&cp1_gpio1 9 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>; + los-gpios = <&cp1_gpio1 11 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&cp1_gpio1 10 GPIO_ACTIVE_LOW>; + tx-disable-gpios = <&cp1_gpio1 9 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&cp1_sfp_pins>; /* diff --git a/dts/src/arm64/marvell/cn9132-db.dtsi b/dts/src/arm64/marvell/cn9132-db.dtsi index 3f1795fb4f..512a4fa286 100644 --- a/dts/src/arm64/marvell/cn9132-db.dtsi +++ b/dts/src/arm64/marvell/cn9132-db.dtsi @@ -57,10 +57,10 @@ cp2_sfp_eth0: sfp-eth0 { compatible = "sff,sfp"; i2c-bus = <&cp2_sfpp0_i2c>; - los-gpio = <&cp2_module_expander1 11 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&cp2_module_expander1 10 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&cp2_module_expander1 9 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&cp2_module_expander1 8 GPIO_ACTIVE_HIGH>; + los-gpios = <&cp2_module_expander1 11 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&cp2_module_expander1 10 GPIO_ACTIVE_LOW>; + tx-disable-gpios = <&cp2_module_expander1 9 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&cp2_module_expander1 8 GPIO_ACTIVE_HIGH>; /* * SFP cages are unconnected on early PCBs because of an the I2C * lanes not being connected. Prevent the port for being diff --git a/dts/src/arm64/mediatek/mt2712-evb.dts b/dts/src/arm64/mediatek/mt2712-evb.dts index 11aa135aa0..9b1af9c801 100644 --- a/dts/src/arm64/mediatek/mt2712-evb.dts +++ b/dts/src/arm64/mediatek/mt2712-evb.dts @@ -106,7 +106,7 @@ }; ð { - phy-mode ="rgmii-rxid"; + phy-mode = "rgmii-rxid"; phy-handle = <ðernet_phy0>; mediatek,tx-delay-ps = <1530>; snps,reset-gpio = <&pio 87 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm64/mediatek/mt2712e.dtsi b/dts/src/arm64/mediatek/mt2712e.dtsi index 623eb3beab..4797537cb3 100644 --- a/dts/src/arm64/mediatek/mt2712e.dtsi +++ b/dts/src/arm64/mediatek/mt2712e.dtsi @@ -329,6 +329,7 @@ interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_LOW>; clocks = <&infracfg CLK_INFRA_M4U>; clock-names = "bclk"; + mediatek,infracfg = <&infracfg>; mediatek,larbs = <&larb0>, <&larb1>, <&larb2>, <&larb3>, <&larb6>; #iommu-cells = <1>; @@ -346,6 +347,7 @@ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_LOW>; clocks = <&infracfg CLK_INFRA_M4U>; clock-names = "bclk"; + mediatek,infracfg = <&infracfg>; mediatek,larbs = <&larb4>, <&larb5>, <&larb7>; #iommu-cells = <1>; }; diff --git a/dts/src/arm64/mediatek/mt6755.dtsi b/dts/src/arm64/mediatek/mt6755.dtsi index 01ba776697..b55d3fac9b 100644 --- a/dts/src/arm64/mediatek/mt6755.dtsi +++ b/dts/src/arm64/mediatek/mt6755.dtsi @@ -1,14 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (c) 2016 MediaTek Inc. * Author: Mars.C <mars.cheng@mediatek.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <dt-bindings/interrupt-controller/irq.h> diff --git a/dts/src/arm64/mediatek/mt6795.dtsi b/dts/src/arm64/mediatek/mt6795.dtsi index c85659d0ff..d4842b4a4e 100644 --- a/dts/src/arm64/mediatek/mt6795.dtsi +++ b/dts/src/arm64/mediatek/mt6795.dtsi @@ -1,18 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (c) 2015 MediaTek Inc. * Author: Mars.C <mars.cheng@mediatek.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/pinctrl/mt6795-pinfunc.h> / { compatible = "mediatek,mt6795"; @@ -34,6 +28,8 @@ compatible = "arm,cortex-a53"; enable-method = "psci"; reg = <0x000>; + cci-control-port = <&cci_control2>; + next-level-cache = <&l2_0>; }; cpu1: cpu@1 { @@ -41,6 +37,8 @@ compatible = "arm,cortex-a53"; enable-method = "psci"; reg = <0x001>; + cci-control-port = <&cci_control2>; + next-level-cache = <&l2_0>; }; cpu2: cpu@2 { @@ -48,6 +46,8 @@ compatible = "arm,cortex-a53"; enable-method = "psci"; reg = <0x002>; + cci-control-port = <&cci_control2>; + next-level-cache = <&l2_0>; }; cpu3: cpu@3 { @@ -55,6 +55,8 @@ compatible = "arm,cortex-a53"; enable-method = "psci"; reg = <0x003>; + cci-control-port = <&cci_control2>; + next-level-cache = <&l2_0>; }; cpu4: cpu@100 { @@ -62,6 +64,8 @@ compatible = "arm,cortex-a53"; enable-method = "psci"; reg = <0x100>; + cci-control-port = <&cci_control1>; + next-level-cache = <&l2_1>; }; cpu5: cpu@101 { @@ -69,6 +73,8 @@ compatible = "arm,cortex-a53"; enable-method = "psci"; reg = <0x101>; + cci-control-port = <&cci_control1>; + next-level-cache = <&l2_1>; }; cpu6: cpu@102 { @@ -76,6 +82,8 @@ compatible = "arm,cortex-a53"; enable-method = "psci"; reg = <0x102>; + cci-control-port = <&cci_control1>; + next-level-cache = <&l2_1>; }; cpu7: cpu@103 { @@ -83,27 +91,88 @@ compatible = "arm,cortex-a53"; enable-method = "psci"; reg = <0x103>; + cci-control-port = <&cci_control1>; + next-level-cache = <&l2_1>; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + + core2 { + cpu = <&cpu2>; + }; + + core3 { + cpu = <&cpu3>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu4>; + }; + + core1 { + cpu = <&cpu5>; + }; + + core2 { + cpu = <&cpu6>; + }; + + core3 { + cpu = <&cpu7>; + }; + }; + }; + + l2_0: l2-cache0 { + compatible = "cache"; + cache-level = <2>; + }; + + l2_1: l2-cache1 { + compatible = "cache"; + cache-level = <2>; }; }; - system_clk: dummy13m { + clk26m: oscillator-26m { compatible = "fixed-clock"; - clock-frequency = <13000000>; #clock-cells = <0>; + clock-frequency = <26000000>; + clock-output-names = "clk26m"; }; - rtc_clk: dummy32k { + clk32k: oscillator-32k { compatible = "fixed-clock"; - clock-frequency = <32000>; #clock-cells = <0>; + clock-frequency = <32000>; + clock-output-names = "clk32k"; }; - uart_clk: dummy26m { + system_clk: dummy13m { compatible = "fixed-clock"; - clock-frequency = <26000000>; + clock-frequency = <13000000>; #clock-cells = <0>; }; + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_LOW>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + timer { compatible = "arm,armv8-timer"; interrupt-parent = <&gic>; @@ -117,59 +186,133 @@ (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; }; - sysirq: intpol-controller@10200620 { - compatible = "mediatek,mt6795-sysirq", - "mediatek,mt6577-sysirq"; - interrupt-controller; - #interrupt-cells = <3>; - interrupt-parent = <&gic>; - reg = <0 0x10200620 0 0x20>; - }; + soc { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + ranges; - gic: interrupt-controller@10221000 { - compatible = "arm,gic-400"; - #interrupt-cells = <3>; - interrupt-parent = <&gic>; - interrupt-controller; - reg = <0 0x10221000 0 0x1000>, - <0 0x10222000 0 0x2000>, - <0 0x10224000 0 0x2000>, - <0 0x10226000 0 0x2000>; - }; + pio: pinctrl@10005000 { + compatible = "mediatek,mt6795-pinctrl"; + reg = <0 0x10005000 0 0x1000>, <0 0x1000b000 0 0x1000>; + reg-names = "base", "eint"; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pio 0 0 196>; + interrupt-controller; + #interrupt-cells = <2>; + }; - uart0: serial@11002000 { - compatible = "mediatek,mt6795-uart", - "mediatek,mt6577-uart"; - reg = <0 0x11002000 0 0x400>; - interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>; - clocks = <&uart_clk>; - status = "disabled"; - }; + watchdog: watchdog@10007000 { + compatible = "mediatek,mt6795-wdt"; + reg = <0 0x10007000 0 0x100>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_LOW>; + #reset-cells = <1>; + timeout-sec = <20>; + }; - uart1: serial@11003000 { - compatible = "mediatek,mt6795-uart", - "mediatek,mt6577-uart"; - reg = <0 0x11003000 0 0x400>; - interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>; - clocks = <&uart_clk>; - status = "disabled"; - }; + timer: timer@10008000 { + compatible = "mediatek,mt6795-timer", + "mediatek,mt6577-timer"; + reg = <0 0x10008000 0 0x1000>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>; + clocks = <&system_clk>, <&clk32k>; + }; - uart2: serial@11004000 { - compatible = "mediatek,mt6795-uart", - "mediatek,mt6577-uart"; - reg = <0 0x11004000 0 0x400>; - interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>; - clocks = <&uart_clk>; - status = "disabled"; - }; + sysirq: intpol-controller@10200620 { + compatible = "mediatek,mt6795-sysirq", + "mediatek,mt6577-sysirq"; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + reg = <0 0x10200620 0 0x20>; + }; + + gic: interrupt-controller@10221000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + interrupt-controller; + reg = <0 0x10221000 0 0x1000>, + <0 0x10222000 0 0x2000>, + <0 0x10224000 0 0x2000>, + <0 0x10226000 0 0x2000>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + cci: cci@10390000 { + compatible = "arm,cci-400"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0 0x10390000 0 0x1000>; + ranges = <0 0 0x10390000 0x10000>; - uart3: serial@11005000 { - compatible = "mediatek,mt6795-uart", - "mediatek,mt6577-uart"; - reg = <0 0x11005000 0 0x400>; - interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_LOW>; - clocks = <&uart_clk>; - status = "disabled"; + cci_control0: slave-if@1000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace-lite"; + reg = <0x1000 0x1000>; + }; + + cci_control1: slave-if@4000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x4000 0x1000>; + }; + + cci_control2: slave-if@5000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x5000 0x1000>; + }; + + pmu@9000 { + compatible = "arm,cci-400-pmu,r1"; + reg = <0x9000 0x5000>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + uart0: serial@11002000 { + compatible = "mediatek,mt6795-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11002000 0 0x400>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk26m>; + status = "disabled"; + }; + + uart1: serial@11003000 { + compatible = "mediatek,mt6795-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11003000 0 0x400>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk26m>; + status = "disabled"; + }; + + uart2: serial@11004000 { + compatible = "mediatek,mt6795-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11004000 0 0x400>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk26m>; + status = "disabled"; + }; + + uart3: serial@11005000 { + compatible = "mediatek,mt6795-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11005000 0 0x400>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk26m>; + status = "disabled"; + }; }; }; diff --git a/dts/src/arm64/mediatek/mt7622-bananapi-bpi-r64.dts b/dts/src/arm64/mediatek/mt7622-bananapi-bpi-r64.dts index 2b9bf8dd14..d3f9eab2b7 100644 --- a/dts/src/arm64/mediatek/mt7622-bananapi-bpi-r64.dts +++ b/dts/src/arm64/mediatek/mt7622-bananapi-bpi-r64.dts @@ -8,6 +8,7 @@ /dts-v1/; #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> #include "mt7622.dtsi" #include "mt6380.dtsi" @@ -40,30 +41,32 @@ gpio-keys { compatible = "gpio-keys"; - factory { + factory-key { label = "factory"; linux,code = <BTN_0>; gpios = <&pio 0 GPIO_ACTIVE_HIGH>; }; - wps { + wps-key { label = "wps"; linux,code = <KEY_WPS_BUTTON>; - gpios = <&pio 102 GPIO_ACTIVE_HIGH>; + gpios = <&pio 102 GPIO_ACTIVE_LOW>; }; }; leds { compatible = "gpio-leds"; - green { + led-0 { label = "bpi-r64:pio:green"; + color = <LED_COLOR_ID_GREEN>; gpios = <&pio 89 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - red { + led-1 { label = "bpi-r64:pio:red"; + color = <LED_COLOR_ID_RED>; gpios = <&pio 88 GPIO_ACTIVE_HIGH>; default-state = "off"; }; @@ -336,14 +339,14 @@ i2c1_pins: i2c1-pins { mux { function = "i2c"; - groups = "i2c1_0"; + groups = "i2c1_0"; }; }; i2c2_pins: i2c2-pins { mux { function = "i2c"; - groups = "i2c2_0"; + groups = "i2c2_0"; }; }; @@ -366,14 +369,14 @@ irrx_pins: irrx-pins { mux { function = "ir"; - groups = "ir_1_rx"; + groups = "ir_1_rx"; }; }; irtx_pins: irtx-pins { mux { function = "ir"; - groups = "ir_1_tx"; + groups = "ir_1_tx"; }; }; diff --git a/dts/src/arm64/mediatek/mt7622-rfb1.dts b/dts/src/arm64/mediatek/mt7622-rfb1.dts index 596c073d8b..36722cabe6 100644 --- a/dts/src/arm64/mediatek/mt7622-rfb1.dts +++ b/dts/src/arm64/mediatek/mt7622-rfb1.dts @@ -40,15 +40,14 @@ gpio-keys { compatible = "gpio-keys"; - poll-interval = <100>; - factory { + key-factory { label = "factory"; linux,code = <BTN_0>; gpios = <&pio 0 0>; }; - wps { + key-wps { label = "wps"; linux,code = <KEY_WPS_BUTTON>; gpios = <&pio 102 0>; @@ -298,14 +297,14 @@ i2c1_pins: i2c1-pins { mux { function = "i2c"; - groups = "i2c1_0"; + groups = "i2c1_0"; }; }; i2c2_pins: i2c2-pins { mux { function = "i2c"; - groups = "i2c2_0"; + groups = "i2c2_0"; }; }; @@ -328,14 +327,14 @@ irrx_pins: irrx-pins { mux { function = "ir"; - groups = "ir_1_rx"; + groups = "ir_1_rx"; }; }; irtx_pins: irtx-pins { mux { function = "ir"; - groups = "ir_1_tx"; + groups = "ir_1_tx"; }; }; diff --git a/dts/src/arm64/mediatek/mt7622.dtsi b/dts/src/arm64/mediatek/mt7622.dtsi index dbcee8b4d8..146e18b5b1 100644 --- a/dts/src/arm64/mediatek/mt7622.dtsi +++ b/dts/src/arm64/mediatek/mt7622.dtsi @@ -118,8 +118,8 @@ }; psci { - compatible = "arm,psci-0.2"; - method = "smc"; + compatible = "arm,psci-0.2"; + method = "smc"; }; pmu { @@ -616,9 +616,9 @@ afe: audio-controller { compatible = "mediatek,mt7622-audio"; - interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_LOW>, - <GIC_SPI 145 IRQ_TYPE_LEVEL_LOW>; - interrupt-names = "afe", "asys"; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "afe", "asys"; clocks = <&infracfg CLK_INFRA_AUDIO_PD>, <&topckgen CLK_TOP_AUD1_SEL>, diff --git a/dts/src/arm64/mediatek/mt7986a.dtsi b/dts/src/arm64/mediatek/mt7986a.dtsi index d2636a0ed1..e3a407d035 100644 --- a/dts/src/arm64/mediatek/mt7986a.dtsi +++ b/dts/src/arm64/mediatek/mt7986a.dtsi @@ -57,8 +57,8 @@ }; psci { - compatible = "arm,psci-0.2"; - method = "smc"; + compatible = "arm,psci-0.2"; + method = "smc"; }; reserved-memory { diff --git a/dts/src/arm64/mediatek/mt8173-elm-hana-rev7.dts b/dts/src/arm64/mediatek/mt8173-elm-hana-rev7.dts index 44f6149c13..28433b94f7 100644 --- a/dts/src/arm64/mediatek/mt8173-elm-hana-rev7.dts +++ b/dts/src/arm64/mediatek/mt8173-elm-hana-rev7.dts @@ -21,7 +21,7 @@ }; &gpio_keys { - /delete-node/tablet_mode; - /delete-node/volume_down; - /delete-node/volume_up; + /delete-node/switch-tablet-mode; + /delete-node/switch-volume-down; + /delete-node/switch-volume-up; }; diff --git a/dts/src/arm64/mediatek/mt8173-elm.dtsi b/dts/src/arm64/mediatek/mt8173-elm.dtsi index 9c75fbb31f..e21feb85d8 100644 --- a/dts/src/arm64/mediatek/mt8173-elm.dtsi +++ b/dts/src/arm64/mediatek/mt8173-elm.dtsi @@ -53,7 +53,7 @@ pinctrl-names = "default"; pinctrl-0 = <&gpio_keys_pins>; - lid { + switch-lid { label = "Lid"; gpios = <&pio 69 GPIO_ACTIVE_LOW>; linux,code = <SW_LID>; @@ -61,7 +61,7 @@ gpio-key,wakeup; }; - power { + switch-power { label = "Power"; gpios = <&pio 14 GPIO_ACTIVE_HIGH>; linux,code = <KEY_POWER>; @@ -69,7 +69,7 @@ gpio-key,wakeup; }; - tablet_mode { + switch-tablet-mode { label = "Tablet_mode"; gpios = <&pio 121 GPIO_ACTIVE_HIGH>; linux,code = <SW_TABLET_MODE>; @@ -77,13 +77,13 @@ gpio-key,wakeup; }; - volume_down { + switch-volume-down { label = "Volume_down"; gpios = <&pio 123 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; }; - volume_up { + switch-volume-up { label = "Volume_up"; gpios = <&pio 124 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; @@ -300,8 +300,8 @@ regulator-name = "VBUCKA"; regulator-min-microvolt = < 700000>; regulator-max-microvolt = <1310000>; - regulator-min-microamp = <2000000>; - regulator-max-microamp = <4400000>; + regulator-min-microamp = <2000000>; + regulator-max-microamp = <4400000>; regulator-ramp-delay = <10000>; regulator-always-on; regulator-allowed-modes = <DA9211_BUCK_MODE_SYNC @@ -312,8 +312,8 @@ regulator-name = "VBUCKB"; regulator-min-microvolt = < 700000>; regulator-max-microvolt = <1310000>; - regulator-min-microamp = <2000000>; - regulator-max-microamp = <3000000>; + regulator-min-microamp = <2000000>; + regulator-max-microamp = <3000000>; regulator-ramp-delay = <10000>; }; }; @@ -374,8 +374,8 @@ mmc-hs400-1_8v; cap-mmc-hw-reset; hs400-ds-delay = <0x14015>; - mediatek,hs200-cmd-int-delay=<30>; - mediatek,hs400-cmd-int-delay=<14>; + mediatek,hs200-cmd-int-delay = <30>; + mediatek,hs400-cmd-int-delay = <14>; mediatek,hs400-cmd-resp-sel-rising; vmmc-supply = <&mt6397_vemc_3v3_reg>; vqmmc-supply = <&mt6397_vio18_reg>; @@ -410,7 +410,7 @@ sd-uhs-sdr50; sd-uhs-sdr104; keep-power-in-suspend; - enable-sdio-wakeup; + wakeup-source; cap-sdio-irq; vmmc-supply = <&sdio_fixed_3v3>; vqmmc-supply = <&mt6397_vgp3_reg>; diff --git a/dts/src/arm64/mediatek/mt8173-evb.dts b/dts/src/arm64/mediatek/mt8173-evb.dts index 4fa1e93302..0b5f154007 100644 --- a/dts/src/arm64/mediatek/mt8173-evb.dts +++ b/dts/src/arm64/mediatek/mt8173-evb.dts @@ -122,8 +122,8 @@ regulator-name = "VBUCKA"; regulator-min-microvolt = < 700000>; regulator-max-microvolt = <1310000>; - regulator-min-microamp = <2000000>; - regulator-max-microamp = <4400000>; + regulator-min-microamp = <2000000>; + regulator-max-microamp = <4400000>; regulator-ramp-delay = <10000>; regulator-always-on; }; @@ -132,8 +132,8 @@ regulator-name = "VBUCKB"; regulator-min-microvolt = < 700000>; regulator-max-microvolt = <1310000>; - regulator-min-microamp = <2000000>; - regulator-max-microamp = <3000000>; + regulator-min-microamp = <2000000>; + regulator-max-microamp = <3000000>; regulator-ramp-delay = <10000>; }; }; @@ -148,8 +148,8 @@ bus-width = <8>; max-frequency = <50000000>; cap-mmc-highspeed; - mediatek,hs200-cmd-int-delay=<26>; - mediatek,hs400-cmd-int-delay=<14>; + mediatek,hs200-cmd-int-delay = <26>; + mediatek,hs400-cmd-int-delay = <14>; mediatek,hs400-cmd-resp-sel-rising; vmmc-supply = <&mt6397_vemc_3v3_reg>; vqmmc-supply = <&mt6397_vio18_reg>; diff --git a/dts/src/arm64/mediatek/mt8173.dtsi b/dts/src/arm64/mediatek/mt8173.dtsi index 40d7b47fc5..6d9513c1f5 100644 --- a/dts/src/arm64/mediatek/mt8173.dtsi +++ b/dts/src/arm64/mediatek/mt8173.dtsi @@ -1,14 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (c) 2014 MediaTek Inc. * Author: Eddie Huang <eddie.huang@mediatek.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <dt-bindings/clock/mt8173-clk.h> @@ -246,9 +239,9 @@ psci { compatible = "arm,psci-1.0", "arm,psci-0.2", "arm,psci"; method = "smc"; - cpu_suspend = <0x84000001>; - cpu_off = <0x84000002>; - cpu_on = <0x84000003>; + cpu_suspend = <0x84000001>; + cpu_off = <0x84000002>; + cpu_on = <0x84000003>; }; clk26m: oscillator0 { @@ -588,6 +581,7 @@ interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_LOW>; clocks = <&infracfg CLK_INFRA_M4U>; clock-names = "bclk"; + mediatek,infracfg = <&infracfg>; mediatek,larbs = <&larb0>, <&larb1>, <&larb2>, <&larb3>, <&larb4>, <&larb5>; #iommu-cells = <1>; @@ -790,9 +784,12 @@ nor_flash: spi@1100d000 { compatible = "mediatek,mt8173-nor"; reg = <0 0x1100d000 0 0xe0>; + assigned-clocks = <&topckgen CLK_TOP_SPI_SEL>; + assigned-clock-parents = <&clk26m>; clocks = <&pericfg CLK_PERI_SPI>, - <&topckgen CLK_TOP_SPINFI_IFR_SEL>; - clock-names = "spi", "sf"; + <&topckgen CLK_TOP_SPINFI_IFR_SEL>, + <&pericfg CLK_PERI_NFI>; + clock-names = "spi", "sf", "axi"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1505,7 +1502,7 @@ vcodec_enc_vp8: vcodec@19002000 { compatible = "mediatek,mt8173-vcodec-enc-vp8"; - reg = <0 0x19002000 0 0x1000>; /* VENC_LT_SYS */ + reg = <0 0x19002000 0 0x1000>; /* VENC_LT_SYS */ interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_LOW>; iommus = <&iommu M4U_PORT_VENC_RCPU_SET2>, <&iommu M4U_PORT_VENC_REC_FRM_SET2>, diff --git a/dts/src/arm64/mediatek/mt8183-evb.dts b/dts/src/arm64/mediatek/mt8183-evb.dts index f3fd3cca23..52dc4a50e3 100644 --- a/dts/src/arm64/mediatek/mt8183-evb.dts +++ b/dts/src/arm64/mediatek/mt8183-evb.dts @@ -134,7 +134,7 @@ vmmc-supply = <&mt6358_vmch_reg>; vqmmc-supply = <&mt6358_vmc_reg>; keep-power-in-suspend; - enable-sdio-wakeup; + wakeup-source; non-removable; }; @@ -412,6 +412,42 @@ }; +&cci { + proc-supply = <&mt6358_vproc12_reg>; +}; + +&cpu0 { + proc-supply = <&mt6358_vproc12_reg>; +}; + +&cpu1 { + proc-supply = <&mt6358_vproc12_reg>; +}; + +&cpu2 { + proc-supply = <&mt6358_vproc12_reg>; +}; + +&cpu3 { + proc-supply = <&mt6358_vproc12_reg>; +}; + +&cpu4 { + proc-supply = <&mt6358_vproc11_reg>; +}; + +&cpu5 { + proc-supply = <&mt6358_vproc11_reg>; +}; + +&cpu6 { + proc-supply = <&mt6358_vproc11_reg>; +}; + +&cpu7 { + proc-supply = <&mt6358_vproc11_reg>; +}; + &uart0 { status = "okay"; }; diff --git a/dts/src/arm64/mediatek/mt8183-kukui-jacuzzi.dtsi b/dts/src/arm64/mediatek/mt8183-kukui-jacuzzi.dtsi index 2d7a193272..3ac83be536 100644 --- a/dts/src/arm64/mediatek/mt8183-kukui-jacuzzi.dtsi +++ b/dts/src/arm64/mediatek/mt8183-kukui-jacuzzi.dtsi @@ -73,7 +73,7 @@ pinctrl-names = "default"; pinctrl-0 = <&volume_button_pins>; - volume_down { + button-volume-down { label = "Volume Down"; linux,code = <KEY_VOLUMEDOWN>; debounce-interval = <100>; @@ -81,7 +81,7 @@ gpios = <&pio 6 GPIO_ACTIVE_LOW>; }; - volume_up { + button-volume-up { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; debounce-interval = <100>; diff --git a/dts/src/arm64/mediatek/mt8183-kukui-kakadu.dtsi b/dts/src/arm64/mediatek/mt8183-kukui-kakadu.dtsi index 28966a6539..50a0dd36b5 100644 --- a/dts/src/arm64/mediatek/mt8183-kukui-kakadu.dtsi +++ b/dts/src/arm64/mediatek/mt8183-kukui-kakadu.dtsi @@ -45,7 +45,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pen_eject>; - pen-insert { + switch-pen-insert { label = "Pen Insert"; /* Insert = low, eject = high */ gpios = <&pio 6 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm64/mediatek/mt8183-kukui.dtsi b/dts/src/arm64/mediatek/mt8183-kukui.dtsi index 8d5bf73a90..b4b86bb1f1 100644 --- a/dts/src/arm64/mediatek/mt8183-kukui.dtsi +++ b/dts/src/arm64/mediatek/mt8183-kukui.dtsi @@ -144,7 +144,7 @@ pinctrl-names = "default"; pinctrl-0 = <&wifi_pins_wakeup>; - wowlan { + button-wowlan { label = "Wake on WiFi"; gpios = <&pio 113 GPIO_ACTIVE_HIGH>; linux,code = <KEY_WAKEUP>; @@ -230,6 +230,10 @@ status = "okay"; }; +&cci { + proc-supply = <&mt6358_vproc12_reg>; +}; + &cpu0 { proc-supply = <&mt6358_vproc12_reg>; }; @@ -276,6 +280,7 @@ avee-supply = <&ppvarp_lcd>; pp1800-supply = <&pp1800_lcd>; backlight = <&backlight_lcd0>; + rotation = <270>; port { panel_in: endpoint { remote-endpoint = <&dsi_out>; @@ -378,7 +383,7 @@ sd-uhs-sdr50; sd-uhs-sdr104; keep-power-in-suspend; - enable-sdio-wakeup; + wakeup-source; cap-sdio-irq; non-removable; no-mmc; @@ -817,6 +822,10 @@ }; }; +&mfg_async { + domain-supply = <&mt6358_vsram_gpu_reg>; +}; + &mfg { domain-supply = <&mt6358_vgpu_reg>; }; diff --git a/dts/src/arm64/mediatek/mt8183-pumpkin.dts b/dts/src/arm64/mediatek/mt8183-pumpkin.dts index afeb5cd378..530e0c9ce0 100644 --- a/dts/src/arm64/mediatek/mt8183-pumpkin.dts +++ b/dts/src/arm64/mediatek/mt8183-pumpkin.dts @@ -159,7 +159,7 @@ vmmc-supply = <&mt6358_vmch_reg>; vqmmc-supply = <&mt6358_vmc_reg>; keep-power-in-suspend; - enable-sdio-wakeup; + wakeup-source; non-removable; }; diff --git a/dts/src/arm64/mediatek/mt8183.dtsi b/dts/src/arm64/mediatek/mt8183.dtsi index 01e6502519..9d32871973 100644 --- a/dts/src/arm64/mediatek/mt8183.dtsi +++ b/dts/src/arm64/mediatek/mt8183.dtsi @@ -42,6 +42,252 @@ rdma1 = &rdma1; }; + cluster0_opp: opp-table-cluster0 { + compatible = "operating-points-v2"; + opp-shared; + opp0-793000000 { + opp-hz = /bits/ 64 <793000000>; + opp-microvolt = <650000>; + required-opps = <&opp2_00>; + }; + opp0-910000000 { + opp-hz = /bits/ 64 <910000000>; + opp-microvolt = <687500>; + required-opps = <&opp2_01>; + }; + opp0-1014000000 { + opp-hz = /bits/ 64 <1014000000>; + opp-microvolt = <718750>; + required-opps = <&opp2_02>; + }; + opp0-1131000000 { + opp-hz = /bits/ 64 <1131000000>; + opp-microvolt = <756250>; + required-opps = <&opp2_03>; + }; + opp0-1248000000 { + opp-hz = /bits/ 64 <1248000000>; + opp-microvolt = <800000>; + required-opps = <&opp2_04>; + }; + opp0-1326000000 { + opp-hz = /bits/ 64 <1326000000>; + opp-microvolt = <818750>; + required-opps = <&opp2_05>; + }; + opp0-1417000000 { + opp-hz = /bits/ 64 <1417000000>; + opp-microvolt = <850000>; + required-opps = <&opp2_06>; + }; + opp0-1508000000 { + opp-hz = /bits/ 64 <1508000000>; + opp-microvolt = <868750>; + required-opps = <&opp2_07>; + }; + opp0-1586000000 { + opp-hz = /bits/ 64 <1586000000>; + opp-microvolt = <893750>; + required-opps = <&opp2_08>; + }; + opp0-1625000000 { + opp-hz = /bits/ 64 <1625000000>; + opp-microvolt = <906250>; + required-opps = <&opp2_09>; + }; + opp0-1677000000 { + opp-hz = /bits/ 64 <1677000000>; + opp-microvolt = <931250>; + required-opps = <&opp2_10>; + }; + opp0-1716000000 { + opp-hz = /bits/ 64 <1716000000>; + opp-microvolt = <943750>; + required-opps = <&opp2_11>; + }; + opp0-1781000000 { + opp-hz = /bits/ 64 <1781000000>; + opp-microvolt = <975000>; + required-opps = <&opp2_12>; + }; + opp0-1846000000 { + opp-hz = /bits/ 64 <1846000000>; + opp-microvolt = <1000000>; + required-opps = <&opp2_13>; + }; + opp0-1924000000 { + opp-hz = /bits/ 64 <1924000000>; + opp-microvolt = <1025000>; + required-opps = <&opp2_14>; + }; + opp0-1989000000 { + opp-hz = /bits/ 64 <1989000000>; + opp-microvolt = <1050000>; + required-opps = <&opp2_15>; + }; }; + + cluster1_opp: opp-table-cluster1 { + compatible = "operating-points-v2"; + opp-shared; + opp1-793000000 { + opp-hz = /bits/ 64 <793000000>; + opp-microvolt = <700000>; + required-opps = <&opp2_00>; + }; + opp1-910000000 { + opp-hz = /bits/ 64 <910000000>; + opp-microvolt = <725000>; + required-opps = <&opp2_01>; + }; + opp1-1014000000 { + opp-hz = /bits/ 64 <1014000000>; + opp-microvolt = <750000>; + required-opps = <&opp2_02>; + }; + opp1-1131000000 { + opp-hz = /bits/ 64 <1131000000>; + opp-microvolt = <775000>; + required-opps = <&opp2_03>; + }; + opp1-1248000000 { + opp-hz = /bits/ 64 <1248000000>; + opp-microvolt = <800000>; + required-opps = <&opp2_04>; + }; + opp1-1326000000 { + opp-hz = /bits/ 64 <1326000000>; + opp-microvolt = <825000>; + required-opps = <&opp2_05>; + }; + opp1-1417000000 { + opp-hz = /bits/ 64 <1417000000>; + opp-microvolt = <850000>; + required-opps = <&opp2_06>; + }; + opp1-1508000000 { + opp-hz = /bits/ 64 <1508000000>; + opp-microvolt = <875000>; + required-opps = <&opp2_07>; + }; + opp1-1586000000 { + opp-hz = /bits/ 64 <1586000000>; + opp-microvolt = <900000>; + required-opps = <&opp2_08>; + }; + opp1-1625000000 { + opp-hz = /bits/ 64 <1625000000>; + opp-microvolt = <912500>; + required-opps = <&opp2_09>; + }; + opp1-1677000000 { + opp-hz = /bits/ 64 <1677000000>; + opp-microvolt = <931250>; + required-opps = <&opp2_10>; + }; + opp1-1716000000 { + opp-hz = /bits/ 64 <1716000000>; + opp-microvolt = <950000>; + required-opps = <&opp2_11>; + }; + opp1-1781000000 { + opp-hz = /bits/ 64 <1781000000>; + opp-microvolt = <975000>; + required-opps = <&opp2_12>; + }; + opp1-1846000000 { + opp-hz = /bits/ 64 <1846000000>; + opp-microvolt = <1000000>; + required-opps = <&opp2_13>; + }; + opp1-1924000000 { + opp-hz = /bits/ 64 <1924000000>; + opp-microvolt = <1025000>; + required-opps = <&opp2_14>; + }; + opp1-1989000000 { + opp-hz = /bits/ 64 <1989000000>; + opp-microvolt = <1050000>; + required-opps = <&opp2_15>; + }; + }; + + cci_opp: opp-table-cci { + compatible = "operating-points-v2"; + opp-shared; + opp2_00: opp-273000000 { + opp-hz = /bits/ 64 <273000000>; + opp-microvolt = <650000>; + }; + opp2_01: opp-338000000 { + opp-hz = /bits/ 64 <338000000>; + opp-microvolt = <687500>; + }; + opp2_02: opp-403000000 { + opp-hz = /bits/ 64 <403000000>; + opp-microvolt = <718750>; + }; + opp2_03: opp-463000000 { + opp-hz = /bits/ 64 <463000000>; + opp-microvolt = <756250>; + }; + opp2_04: opp-546000000 { + opp-hz = /bits/ 64 <546000000>; + opp-microvolt = <800000>; + }; + opp2_05: opp-624000000 { + opp-hz = /bits/ 64 <624000000>; + opp-microvolt = <818750>; + }; + opp2_06: opp-689000000 { + opp-hz = /bits/ 64 <689000000>; + opp-microvolt = <850000>; + }; + opp2_07: opp-767000000 { + opp-hz = /bits/ 64 <767000000>; + opp-microvolt = <868750>; + }; + opp2_08: opp-845000000 { + opp-hz = /bits/ 64 <845000000>; + opp-microvolt = <893750>; + }; + opp2_09: opp-871000000 { + opp-hz = /bits/ 64 <871000000>; + opp-microvolt = <906250>; + }; + opp2_10: opp-923000000 { + opp-hz = /bits/ 64 <923000000>; + opp-microvolt = <931250>; + }; + opp2_11: opp-962000000 { + opp-hz = /bits/ 64 <962000000>; + opp-microvolt = <943750>; + }; + opp2_12: opp-1027000000 { + opp-hz = /bits/ 64 <1027000000>; + opp-microvolt = <975000>; + }; + opp2_13: opp-1092000000 { + opp-hz = /bits/ 64 <1092000000>; + opp-microvolt = <1000000>; + }; + opp2_14: opp-1144000000 { + opp-hz = /bits/ 64 <1144000000>; + opp-microvolt = <1025000>; + }; + opp2_15: opp-1196000000 { + opp-hz = /bits/ 64 <1196000000>; + opp-microvolt = <1050000>; + }; + }; + + cci: cci { + compatible = "mediatek,mt8183-cci"; + clocks = <&mcucfg CLK_MCU_BUS_SEL>, + <&topckgen CLK_TOP_ARMPLL_DIV_PLL1>; + clock-names = "cci", "intermediate"; + operating-points-v2 = <&cci_opp>; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -85,8 +331,13 @@ enable-method = "psci"; capacity-dmips-mhz = <741>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP0>; + clocks = <&mcucfg CLK_MCU_MP0_SEL>, + <&topckgen CLK_TOP_ARMPLL_DIV_PLL1>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cluster0_opp>; dynamic-power-coefficient = <84>; #cooling-cells = <2>; + mediatek,cci = <&cci>; }; cpu1: cpu@1 { @@ -96,8 +347,13 @@ enable-method = "psci"; capacity-dmips-mhz = <741>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP0>; + clocks = <&mcucfg CLK_MCU_MP0_SEL>, + <&topckgen CLK_TOP_ARMPLL_DIV_PLL1>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cluster0_opp>; dynamic-power-coefficient = <84>; #cooling-cells = <2>; + mediatek,cci = <&cci>; }; cpu2: cpu@2 { @@ -107,8 +363,13 @@ enable-method = "psci"; capacity-dmips-mhz = <741>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP0>; + clocks = <&mcucfg CLK_MCU_MP0_SEL>, + <&topckgen CLK_TOP_ARMPLL_DIV_PLL1>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cluster0_opp>; dynamic-power-coefficient = <84>; #cooling-cells = <2>; + mediatek,cci = <&cci>; }; cpu3: cpu@3 { @@ -118,8 +379,13 @@ enable-method = "psci"; capacity-dmips-mhz = <741>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP0>; + clocks = <&mcucfg CLK_MCU_MP0_SEL>, + <&topckgen CLK_TOP_ARMPLL_DIV_PLL1>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cluster0_opp>; dynamic-power-coefficient = <84>; #cooling-cells = <2>; + mediatek,cci = <&cci>; }; cpu4: cpu@100 { @@ -129,8 +395,13 @@ enable-method = "psci"; capacity-dmips-mhz = <1024>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP1>; + clocks = <&mcucfg CLK_MCU_MP2_SEL>, + <&topckgen CLK_TOP_ARMPLL_DIV_PLL1>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cluster1_opp>; dynamic-power-coefficient = <211>; #cooling-cells = <2>; + mediatek,cci = <&cci>; }; cpu5: cpu@101 { @@ -140,8 +411,13 @@ enable-method = "psci"; capacity-dmips-mhz = <1024>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP1>; + clocks = <&mcucfg CLK_MCU_MP2_SEL>, + <&topckgen CLK_TOP_ARMPLL_DIV_PLL1>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cluster1_opp>; dynamic-power-coefficient = <211>; #cooling-cells = <2>; + mediatek,cci = <&cci>; }; cpu6: cpu@102 { @@ -151,8 +427,13 @@ enable-method = "psci"; capacity-dmips-mhz = <1024>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP1>; + clocks = <&mcucfg CLK_MCU_MP2_SEL>, + <&topckgen CLK_TOP_ARMPLL_DIV_PLL1>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cluster1_opp>; dynamic-power-coefficient = <211>; #cooling-cells = <2>; + mediatek,cci = <&cci>; }; cpu7: cpu@103 { @@ -162,8 +443,13 @@ enable-method = "psci"; capacity-dmips-mhz = <1024>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP1>; + clocks = <&mcucfg CLK_MCU_MP2_SEL>, + <&topckgen CLK_TOP_ARMPLL_DIV_PLL1>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cluster1_opp>; dynamic-power-coefficient = <211>; #cooling-cells = <2>; + mediatek,cci = <&cci>; }; idle-states { @@ -295,8 +581,8 @@ }; psci { - compatible = "arm,psci-1.0"; - method = "smc"; + compatible = "arm,psci-1.0"; + method = "smc"; }; clk26m: oscillator { @@ -321,7 +607,7 @@ compatible = "simple-bus"; ranges; - soc_data: soc_data@8000000 { + soc_data: efuse@8000000 { compatible = "mediatek,mt8183-efuse", "mediatek,efuse"; reg = <0 0x08000000 0 0x0010>; @@ -502,9 +788,9 @@ #power-domain-cells = <0>; }; - power-domain@MT8183_POWER_DOMAIN_MFG_ASYNC { + mfg_async: power-domain@MT8183_POWER_DOMAIN_MFG_ASYNC { reg = <MT8183_POWER_DOMAIN_MFG_ASYNC>; - clocks = <&topckgen CLK_TOP_MUX_MFG>; + clocks = <&topckgen CLK_TOP_MUX_MFG>; clock-names = "mfg"; #address-cells = <1>; #size-cells = <0>; @@ -807,6 +1093,18 @@ status = "disabled"; }; + svs: svs@1100b000 { + compatible = "mediatek,mt8183-svs"; + reg = <0 0x1100b000 0 0x1000>; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_THERM>; + clock-names = "main"; + nvmem-cells = <&svs_calibration>, + <&thermal_calibration>; + nvmem-cell-names = "svs-calibration-data", + "t-calibration-data"; + }; + thermal: thermal@1100b000 { #thermal-sensor-cells = <1>; compatible = "mediatek,mt8183-thermal"; @@ -1150,7 +1448,7 @@ }; ssusb: usb@11201000 { - compatible ="mediatek,mt8183-mtu3", "mediatek,mtu3"; + compatible = "mediatek,mt8183-mtu3", "mediatek,mtu3"; reg = <0 0x11201000 0 0x2e00>, <0 0x11203e00 0 0x0100>; reg-names = "mac", "ippc"; @@ -1325,6 +1623,10 @@ mipi_tx_calibration: calib@190 { reg = <0x190 0xc>; }; + + svs_calibration: calib@580 { + reg = <0x580 0x64>; + }; }; u3phy: t-phy@11f40000 { @@ -1508,6 +1810,7 @@ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; mediatek,gce-events = <CMDQ_EVENT_MUTEX_STREAM_DONE0>, <CMDQ_EVENT_MUTEX_STREAM_DONE1>; + mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x6000 0x1000>; }; larb0: larb@14017000 { diff --git a/dts/src/arm64/mediatek/mt8192-asurada-hayato-r1.dts b/dts/src/arm64/mediatek/mt8192-asurada-hayato-r1.dts new file mode 100644 index 0000000000..1e91491945 --- /dev/null +++ b/dts/src/arm64/mediatek/mt8192-asurada-hayato-r1.dts @@ -0,0 +1,47 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2020 Google LLC + */ +/dts-v1/; +#include "mt8192-asurada.dtsi" + +/ { + model = "Google Hayato rev1"; + compatible = "google,hayato-rev1", "google,hayato", "mediatek,mt8192"; +}; + +&keyboard_controller { + function-row-physmap = < + MATRIX_KEY(0x00, 0x02, 0) /* T1 */ + MATRIX_KEY(0x03, 0x02, 0) /* T2 */ + MATRIX_KEY(0x02, 0x02, 0) /* T3 */ + MATRIX_KEY(0x01, 0x02, 0) /* T4 */ + MATRIX_KEY(0x03, 0x04, 0) /* T5 */ + MATRIX_KEY(0x02, 0x04, 0) /* T6 */ + MATRIX_KEY(0x01, 0x04, 0) /* T7 */ + MATRIX_KEY(0x02, 0x09, 0) /* T8 */ + MATRIX_KEY(0x01, 0x09, 0) /* T9 */ + MATRIX_KEY(0x00, 0x04, 0) /* T10 */ + >; + linux,keymap = < + MATRIX_KEY(0x00, 0x02, KEY_BACK) + MATRIX_KEY(0x03, 0x02, KEY_FORWARD) + MATRIX_KEY(0x02, 0x02, KEY_REFRESH) + MATRIX_KEY(0x01, 0x02, KEY_FULL_SCREEN) + MATRIX_KEY(0x03, 0x04, KEY_SCALE) + MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN) + MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP) + MATRIX_KEY(0x02, 0x09, KEY_MUTE) + MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN) + MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP) + + CROS_STD_MAIN_KEYMAP + >; +}; + +&touchscreen { + compatible = "hid-over-i2c"; + post-power-on-delay-ms = <10>; + hid-descr-addr = <0x0001>; + vdd-supply = <&pp3300_u>; +}; diff --git a/dts/src/arm64/mediatek/mt8192-asurada-spherion-r0.dts b/dts/src/arm64/mediatek/mt8192-asurada-spherion-r0.dts new file mode 100644 index 0000000000..fa3d9573f3 --- /dev/null +++ b/dts/src/arm64/mediatek/mt8192-asurada-spherion-r0.dts @@ -0,0 +1,62 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2021 Google LLC + */ +/dts-v1/; +#include "mt8192-asurada.dtsi" +#include <dt-bindings/leds/common.h> + +/ { + model = "Google Spherion (rev0 - 3)"; + compatible = "google,spherion-rev3", "google,spherion-rev2", + "google,spherion-rev1", "google,spherion-rev0", + "google,spherion", "mediatek,mt8192"; + + pwmleds { + compatible = "pwm-leds"; + + led { + function = LED_FUNCTION_KBD_BACKLIGHT; + color = <LED_COLOR_ID_WHITE>; + pwms = <&cros_ec_pwm 0>; + max-brightness = <1023>; + }; + }; +}; + +&cros_ec_pwm { + status = "okay"; +}; + +&keyboard_controller { + function-row-physmap = < + MATRIX_KEY(0x00, 0x02, 0) /* T1 */ + MATRIX_KEY(0x03, 0x02, 0) /* T2 */ + MATRIX_KEY(0x02, 0x02, 0) /* T3 */ + MATRIX_KEY(0x01, 0x02, 0) /* T4 */ + MATRIX_KEY(0x03, 0x04, 0) /* T5 */ + MATRIX_KEY(0x02, 0x04, 0) /* T6 */ + MATRIX_KEY(0x01, 0x04, 0) /* T7 */ + MATRIX_KEY(0x02, 0x09, 0) /* T8 */ + MATRIX_KEY(0x01, 0x09, 0) /* T9 */ + MATRIX_KEY(0x00, 0x04, 0) /* T10 */ + >; + linux,keymap = < + MATRIX_KEY(0x00, 0x02, KEY_BACK) + MATRIX_KEY(0x03, 0x02, KEY_REFRESH) + MATRIX_KEY(0x02, 0x02, KEY_FULL_SCREEN) + MATRIX_KEY(0x01, 0x02, KEY_SCALE) + MATRIX_KEY(0x03, 0x04, KEY_SYSRQ) + MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN) + MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP) + MATRIX_KEY(0x02, 0x09, KEY_MUTE) + MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN) + MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP) + + CROS_STD_MAIN_KEYMAP + >; +}; + +&touchscreen { + compatible = "elan,ekth3500"; +}; diff --git a/dts/src/arm64/mediatek/mt8192-asurada.dtsi b/dts/src/arm64/mediatek/mt8192-asurada.dtsi new file mode 100644 index 0000000000..4b314435f8 --- /dev/null +++ b/dts/src/arm64/mediatek/mt8192-asurada.dtsi @@ -0,0 +1,959 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2020 MediaTek Inc. + * Author: Seiya Wang <seiya.wang@mediatek.com> + */ +/dts-v1/; +#include "mt8192.dtsi" +#include "mt6359.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/spmi/spmi.h> + +/ { + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x80000000>; + }; + + /* system wide LDO 1.8V power rail */ + pp1800_ldo_g: regulator-1v8-g { + compatible = "regulator-fixed"; + regulator-name = "pp1800_ldo_g"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&pp3300_g>; + }; + + /* system wide switching 3.3V power rail */ + pp3300_g: regulator-3v3-g { + compatible = "regulator-fixed"; + regulator-name = "pp3300_g"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&ppvar_sys>; + }; + + /* system wide LDO 3.3V power rail */ + pp3300_ldo_z: regulator-3v3-z { + compatible = "regulator-fixed"; + regulator-name = "pp3300_ldo_z"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&ppvar_sys>; + }; + + /* separately switched 3.3V power rail */ + pp3300_u: regulator-3v3-u { + compatible = "regulator-fixed"; + regulator-name = "pp3300_u"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + /* enable pin wired to GPIO controlled by EC */ + vin-supply = <&pp3300_g>; + }; + + pp3300_wlan: regulator-3v3-wlan { + compatible = "regulator-fixed"; + regulator-name = "pp3300_wlan"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pp3300_wlan_pins>; + enable-active-high; + gpio = <&pio 143 GPIO_ACTIVE_HIGH>; + }; + + /* system wide switching 5.0V power rail */ + pp5000_a: regulator-5v0-a { + compatible = "regulator-fixed"; + regulator-name = "pp5000_a"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&ppvar_sys>; + }; + + /* system wide semi-regulated power rail from battery or USB */ + ppvar_sys: regulator-var-sys { + compatible = "regulator-fixed"; + regulator-name = "ppvar_sys"; + regulator-always-on; + regulator-boot-on; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + scp_mem_reserved: scp@50000000 { + compatible = "shared-dma-pool"; + reg = <0 0x50000000 0 0x2900000>; + no-map; + }; + + wifi_restricted_dma_region: wifi@c0000000 { + compatible = "restricted-dma-pool"; + reg = <0 0xc0000000 0 0x4000000>; + }; + }; +}; + +&i2c0 { + status = "okay"; + + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + touchscreen: touchscreen@10 { + reg = <0x10>; + interrupts-extended = <&pio 21 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen_pins>; + }; +}; + +&i2c1 { + status = "okay"; + + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; +}; + +&i2c2 { + status = "okay"; + + clock-frequency = <400000>; + clock-stretch-ns = <12600>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + trackpad@15 { + compatible = "elan,ekth3000"; + reg = <0x15>; + interrupts-extended = <&pio 15 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&trackpad_pins>; + vcc-supply = <&pp3300_u>; + wakeup-source; + }; +}; + +&i2c3 { + status = "okay"; + + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; +}; + +&i2c7 { + status = "okay"; + + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c7_pins>; +}; + +&mmc0 { + status = "okay"; + + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc0_default_pins>; + pinctrl-1 = <&mmc0_uhs_pins>; + bus-width = <8>; + max-frequency = <200000000>; + vmmc-supply = <&mt6359_vemc_1_ldo_reg>; + vqmmc-supply = <&mt6359_vufs_ldo_reg>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + supports-cqe; + cap-mmc-hw-reset; + mmc-hs400-enhanced-strobe; + hs400-ds-delay = <0x12814>; + no-sdio; + no-sd; + non-removable; +}; + +&mmc1 { + status = "okay"; + + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc1_default_pins>; + pinctrl-1 = <&mmc1_uhs_pins>; + bus-width = <4>; + max-frequency = <200000000>; + cd-gpios = <&pio 17 GPIO_ACTIVE_LOW>; + vmmc-supply = <&mt6360_ldo5_reg>; + vqmmc-supply = <&mt6360_ldo3_reg>; + cap-sd-highspeed; + sd-uhs-sdr50; + sd-uhs-sdr104; + no-sdio; + no-mmc; +}; + +/* for CORE */ +&mt6359_vgpu11_buck_reg { + regulator-always-on; +}; + +&mt6359_vgpu11_sshub_buck_reg { + regulator-always-on; + regulator-min-microvolt = <575000>; + regulator-max-microvolt = <575000>; +}; + +&mt6359_vrf12_ldo_reg { + regulator-always-on; +}; + +&mt6359_vufs_ldo_reg { + regulator-always-on; +}; + +&mt6359codec { + mediatek,dmic-mode = <1>; /* one-wire */ + mediatek,mic-type-0 = <2>; /* DMIC */ + mediatek,mic-type-2 = <2>; /* DMIC */ +}; + +&nor_flash { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&nor_flash_pins>; + assigned-clocks = <&topckgen CLK_TOP_SFLASH_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D6_D8>; + + flash@0 { + compatible = "winbond,w25q64jwm", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <52000000>; + spi-rx-bus-width = <2>; + spi-tx-bus-width = <2>; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_pins>; + + pcie0: pcie@0,0 { + device_type = "pci"; + reg = <0x0000 0 0 0 0>; + num-lanes = <1>; + bus-range = <0x1 0x1>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + wifi: wifi@0,0 { + reg = <0x10000 0 0 0 0x100000>, + <0x10000 0 0x100000 0 0x100000>; + memory-region = <&wifi_restricted_dma_region>; + }; + }; +}; + +&pio { + /* 220 lines */ + gpio-line-names = "I2S_DP_LRCK", + "IS_DP_BCLK", + "I2S_DP_MCLK", + "I2S_DP_DATAOUT", + "SAR0_INT_ODL", + "EC_AP_INT_ODL", + "EDPBRDG_INT_ODL", + "DPBRDG_INT_ODL", + "DPBRDG_PWREN", + "DPBRDG_RST_ODL", + "I2S_HP_MCLK", + "I2S_HP_BCK", + "I2S_HP_LRCK", + "I2S_HP_DATAIN", + /* + * AP_FLASH_WP_L is crossystem ABI. Schematics + * call it AP_FLASH_WP_ODL. + */ + "AP_FLASH_WP_L", + "TRACKPAD_INT_ODL", + "EC_AP_HPD_OD", + "SD_CD_ODL", + "HP_INT_ODL_ALC", + "EN_PP1000_DPBRDG", + "AP_GPIO20", + "TOUCH_INT_L_1V8", + "UART_BT_WAKE_ODL", + "AP_GPIO23", + "AP_SPI_FLASH_CS_L", + "AP_SPI_FLASH_CLK", + "EN_PP3300_DPBRDG_DX", + "AP_SPI_FLASH_MOSI", + "AP_SPI_FLASH_MISO", + "I2S_HP_DATAOUT", + "AP_GPIO30", + "I2S_SPKR_MCLK", + "I2S_SPKR_BCLK", + "I2S_SPKR_LRCK", + "I2S_SPKR_DATAIN", + "I2S_SPKR_DATAOUT", + "AP_SPI_H1_TPM_CLK", + "AP_SPI_H1_TPM_CS_L", + "AP_SPI_H1_TPM_MISO", + "AP_SPI_H1_TPM_MOSI", + "BL_PWM", + "EDPBRDG_PWREN", + "EDPBRDG_RST_ODL", + "EN_PP3300_HUB", + "HUB_RST_L", + "", + "", + "", + "", + "", + "", + "SD_CLK", + "SD_CMD", + "SD_DATA3", + "SD_DATA0", + "SD_DATA2", + "SD_DATA1", + "", + "", + "", + "", + "", + "", + "PCIE_WAKE_ODL", + "PCIE_RST_L", + "PCIE_CLKREQ_ODL", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "SPMI_SCL", + "SPMI_SDA", + "AP_GOOD", + "UART_DBG_TX_AP_RX", + "UART_AP_TX_DBG_RX", + "UART_AP_TX_BT_RX", + "UART_BT_TX_AP_RX", + "MIPI_DPI_D0_R", + "MIPI_DPI_D1_R", + "MIPI_DPI_D2_R", + "MIPI_DPI_D3_R", + "MIPI_DPI_D4_R", + "MIPI_DPI_D5_R", + "MIPI_DPI_D6_R", + "MIPI_DPI_D7_R", + "MIPI_DPI_D8_R", + "MIPI_DPI_D9_R", + "MIPI_DPI_D10_R", + "", + "", + "MIPI_DPI_DE_R", + "MIPI_DPI_D11_R", + "MIPI_DPI_VSYNC_R", + "MIPI_DPI_CLK_R", + "MIPI_DPI_HSYNC_R", + "PCM_BT_DATAIN", + "PCM_BT_SYNC", + "PCM_BT_DATAOUT", + "PCM_BT_CLK", + "AP_I2C_AUDIO_SCL", + "AP_I2C_AUDIO_SDA", + "SCP_I2C_SCL", + "SCP_I2C_SDA", + "AP_I2C_WLAN_SCL", + "AP_I2C_WLAN_SDA", + "AP_I2C_DPBRDG_SCL", + "AP_I2C_DPBRDG_SDA", + "EN_PP1800_DPBRDG_DX", + "EN_PP3300_EDP_DX", + "EN_PP1800_EDPBRDG_DX", + "EN_PP1000_EDPBRDG", + "SCP_JTAG0_TDO", + "SCP_JTAG0_TDI", + "SCP_JTAG0_TMS", + "SCP_JTAG0_TCK", + "SCP_JTAG0_TRSTN", + "EN_PP3000_VMC_PMU", + "EN_PP3300_DISPLAY_DX", + "TOUCH_RST_L_1V8", + "TOUCH_REPORT_DISABLE", + "", + "", + "AP_I2C_TRACKPAD_SCL_1V8", + "AP_I2C_TRACKPAD_SDA_1V8", + "EN_PP3300_WLAN", + "BT_KILL_L", + "WIFI_KILL_L", + "SET_VMC_VOLT_AT_1V8", + "EN_SPK", + "AP_WARM_RST_REQ", + "", + "", + "EN_PP3000_SD_S3", + "AP_EDP_BKLTEN", + "", + "", + "", + "AP_SPI_EC_CLK", + "AP_SPI_EC_CS_L", + "AP_SPI_EC_MISO", + "AP_SPI_EC_MOSI", + "AP_I2C_EDPBRDG_SCL", + "AP_I2C_EDPBRDG_SDA", + "MT6315_PROC_INT", + "MT6315_GPU_INT", + "UART_SERVO_TX_SCP_RX", + "UART_SCP_TX_SERVO_RX", + "BT_RTS_AP_CTS", + "AP_RTS_BT_CTS", + "UART_AP_WAKE_BT_ODL", + "WLAN_ALERT_ODL", + "EC_IN_RW_ODL", + "H1_AP_INT_ODL", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "MSDC0_CMD", + "MSDC0_DAT0", + "MSDC0_DAT2", + "MSDC0_DAT4", + "MSDC0_DAT6", + "MSDC0_DAT1", + "MSDC0_DAT5", + "MSDC0_DAT7", + "MSDC0_DSL", + "MSDC0_CLK", + "MSDC0_DAT3", + "MSDC0_RST_L", + "SCP_VREQ_VAO", + "AUD_DAT_MOSI2", + "AUD_NLE_MOSI1", + "AUD_NLE_MOSI0", + "AUD_DAT_MISO2", + "AP_I2C_SAR_SDA", + "AP_I2C_SAR_SCL", + "AP_I2C_PWR_SCL", + "AP_I2C_PWR_SDA", + "AP_I2C_TS_SCL_1V8", + "AP_I2C_TS_SDA_1V8", + "SRCLKENA0", + "SRCLKENA1", + "AP_EC_WATCHDOG_L", + "PWRAP_SPI0_MI", + "PWRAP_SPI0_CSN", + "PWRAP_SPI0_MO", + "PWRAP_SPI0_CK", + "AP_RTC_CLK32K", + "AUD_CLK_MOSI", + "AUD_SYNC_MOSI", + "AUD_DAT_MOSI0", + "AUD_DAT_MOSI1", + "AUD_DAT_MISO0", + "AUD_DAT_MISO1"; + + cr50_int: cr50-irq-default-pins { + pins-gsc-ap-int-odl { + pinmux = <PINMUX_GPIO171__FUNC_GPIO171>; + input-enable; + }; + }; + + cros_ec_int: cros-ec-irq-default-pins { + pins-ec-ap-int-odl { + pinmux = <PINMUX_GPIO5__FUNC_GPIO5>; + input-enable; + bias-pull-up; + }; + }; + + i2c0_pins: i2c0-default-pins { + pins-bus { + pinmux = <PINMUX_GPIO204__FUNC_SCL0>, + <PINMUX_GPIO205__FUNC_SDA0>; + bias-pull-up = <MTK_PULL_SET_RSEL_011>; + drive-strength-microamp = <1000>; + }; + }; + + i2c1_pins: i2c1-default-pins { + pins-bus { + pinmux = <PINMUX_GPIO118__FUNC_SCL1>, + <PINMUX_GPIO119__FUNC_SDA1>; + bias-pull-up = <MTK_PULL_SET_RSEL_011>; + drive-strength-microamp = <1000>; + }; + }; + + i2c2_pins: i2c2-default-pins { + pins-bus { + pinmux = <PINMUX_GPIO141__FUNC_SCL2>, + <PINMUX_GPIO142__FUNC_SDA2>; + bias-pull-up = <MTK_PULL_SET_RSEL_011>; + }; + }; + + i2c3_pins: i2c3-default-pins { + pins-bus { + pinmux = <PINMUX_GPIO160__FUNC_SCL3>, + <PINMUX_GPIO161__FUNC_SDA3>; + bias-disable; + drive-strength-microamp = <1000>; + }; + }; + + i2c7_pins: i2c7-default-pins { + pins-bus { + pinmux = <PINMUX_GPIO124__FUNC_SCL7>, + <PINMUX_GPIO125__FUNC_SDA7>; + bias-disable; + drive-strength-microamp = <1000>; + }; + }; + + mmc0_default_pins: mmc0-default-pins { + pins-cmd-dat { + pinmux = <PINMUX_GPIO184__FUNC_MSDC0_DAT0>, + <PINMUX_GPIO188__FUNC_MSDC0_DAT1>, + <PINMUX_GPIO185__FUNC_MSDC0_DAT2>, + <PINMUX_GPIO193__FUNC_MSDC0_DAT3>, + <PINMUX_GPIO186__FUNC_MSDC0_DAT4>, + <PINMUX_GPIO189__FUNC_MSDC0_DAT5>, + <PINMUX_GPIO187__FUNC_MSDC0_DAT6>, + <PINMUX_GPIO190__FUNC_MSDC0_DAT7>, + <PINMUX_GPIO183__FUNC_MSDC0_CMD>; + input-enable; + drive-strength = <8>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins-clk { + pinmux = <PINMUX_GPIO192__FUNC_MSDC0_CLK>; + drive-strength = <8>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-rst { + pinmux = <PINMUX_GPIO194__FUNC_MSDC0_RSTB>; + drive-strength = <8>; + bias-pull-down = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + mmc0_uhs_pins: mmc0-uhs-pins { + pins-cmd-dat { + pinmux = <PINMUX_GPIO184__FUNC_MSDC0_DAT0>, + <PINMUX_GPIO188__FUNC_MSDC0_DAT1>, + <PINMUX_GPIO185__FUNC_MSDC0_DAT2>, + <PINMUX_GPIO193__FUNC_MSDC0_DAT3>, + <PINMUX_GPIO186__FUNC_MSDC0_DAT4>, + <PINMUX_GPIO189__FUNC_MSDC0_DAT5>, + <PINMUX_GPIO187__FUNC_MSDC0_DAT6>, + <PINMUX_GPIO190__FUNC_MSDC0_DAT7>, + <PINMUX_GPIO183__FUNC_MSDC0_CMD>; + input-enable; + drive-strength = <10>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins-clk { + pinmux = <PINMUX_GPIO192__FUNC_MSDC0_CLK>; + drive-strength = <10>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-rst { + pinmux = <PINMUX_GPIO194__FUNC_MSDC0_RSTB>; + drive-strength = <8>; + bias-pull-down = <MTK_PUPD_SET_R1R0_01>; + }; + + pins-ds { + pinmux = <PINMUX_GPIO191__FUNC_MSDC0_DSL>; + drive-strength = <10>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + }; + + mmc1_default_pins: mmc1-default-pins { + pins-cmd-dat { + pinmux = <PINMUX_GPIO54__FUNC_MSDC1_DAT0>, + <PINMUX_GPIO56__FUNC_MSDC1_DAT1>, + <PINMUX_GPIO55__FUNC_MSDC1_DAT2>, + <PINMUX_GPIO53__FUNC_MSDC1_DAT3>, + <PINMUX_GPIO52__FUNC_MSDC1_CMD>; + input-enable; + drive-strength = <8>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins-clk { + pinmux = <PINMUX_GPIO51__FUNC_MSDC1_CLK>; + drive-strength = <8>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-insert { + pinmux = <PINMUX_GPIO17__FUNC_GPIO17>; + input-enable; + bias-pull-up; + }; + }; + + mmc1_uhs_pins: mmc1-uhs-pins { + pins-cmd-dat { + pinmux = <PINMUX_GPIO54__FUNC_MSDC1_DAT0>, + <PINMUX_GPIO56__FUNC_MSDC1_DAT1>, + <PINMUX_GPIO55__FUNC_MSDC1_DAT2>, + <PINMUX_GPIO53__FUNC_MSDC1_DAT3>, + <PINMUX_GPIO52__FUNC_MSDC1_CMD>; + input-enable; + drive-strength = <8>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins-clk { + pinmux = <PINMUX_GPIO51__FUNC_MSDC1_CLK>; + input-enable; + drive-strength = <8>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + }; + + nor_flash_pins: nor-flash-default-pins { + pins-cs-io1 { + pinmux = <PINMUX_GPIO24__FUNC_SPINOR_CS>, + <PINMUX_GPIO28__FUNC_SPINOR_IO1>; + input-enable; + bias-pull-up; + drive-strength = <10>; + }; + + pins-io0 { + pinmux = <PINMUX_GPIO27__FUNC_SPINOR_IO0>; + bias-pull-up; + drive-strength = <10>; + }; + + pins-clk { + pinmux = <PINMUX_GPIO25__FUNC_SPINOR_CK>; + input-enable; + bias-pull-up; + drive-strength = <10>; + }; + }; + + pcie_pins: pcie-default-pins { + pins-pcie-wake { + pinmux = <PINMUX_GPIO63__FUNC_PCIE_WAKE_N>; + bias-pull-up; + }; + + pins-pcie-pereset { + pinmux = <PINMUX_GPIO64__FUNC_PCIE_PERESET_N>; + }; + + pins-pcie-clkreq { + pinmux = <PINMUX_GPIO65__FUNC_PCIE_CLKREQ_N>; + bias-pull-up; + }; + + pins-wifi-kill { + pinmux = <PINMUX_GPIO145__FUNC_GPIO145>; /* WIFI_KILL_L */ + output-high; + }; + }; + + pp3300_wlan_pins: pp3300-wlan-pins { + pins-pcie-en-pp3300-wlan { + pinmux = <PINMUX_GPIO143__FUNC_GPIO143>; + output-high; + }; + }; + + scp_pins: scp-pins { + pins-vreq-vao { + pinmux = <PINMUX_GPIO195__FUNC_SCP_VREQ_VAO>; + }; + }; + + spi1_pins: spi1-default-pins { + pins-cs-mosi-clk { + pinmux = <PINMUX_GPIO157__FUNC_SPI1_A_CSB>, + <PINMUX_GPIO159__FUNC_SPI1_A_MO>, + <PINMUX_GPIO156__FUNC_SPI1_A_CLK>; + bias-disable; + }; + + pins-miso { + pinmux = <PINMUX_GPIO158__FUNC_SPI1_A_MI>; + bias-pull-down; + }; + }; + + spi5_pins: spi5-default-pins { + pins-bus { + pinmux = <PINMUX_GPIO38__FUNC_SPI5_A_MI>, + <PINMUX_GPIO37__FUNC_GPIO37>, + <PINMUX_GPIO39__FUNC_SPI5_A_MO>, + <PINMUX_GPIO36__FUNC_SPI5_A_CLK>; + bias-disable; + }; + }; + + trackpad_pins: trackpad-default-pins { + pins-int-n { + pinmux = <PINMUX_GPIO15__FUNC_GPIO15>; + input-enable; + bias-pull-up = <MTK_PUPD_SET_R1R0_11>; + }; + }; + + touchscreen_pins: touchscreen-default-pins { + pins-irq { + pinmux = <PINMUX_GPIO21__FUNC_GPIO21>; + input-enable; + bias-pull-up; + }; + + pins-reset { + pinmux = <PINMUX_GPIO137__FUNC_GPIO137>; + output-high; + }; + + pins-report-sw { + pinmux = <PINMUX_GPIO138__FUNC_GPIO138>; + output-low; + }; + }; +}; + +&pmic { + interrupts-extended = <&pio 214 IRQ_TYPE_LEVEL_HIGH>; +}; + +&scp { + status = "okay"; + + firmware-name = "mediatek/mt8192/scp.img"; + memory-region = <&scp_mem_reserved>; + pinctrl-names = "default"; + pinctrl-0 = <&scp_pins>; + + cros-ec { + compatible = "google,cros-ec-rpmsg"; + mediatek,rpmsg-name = "cros-ec-rpmsg"; + }; +}; + +&spi1 { + status = "okay"; + + mediatek,pad-select = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins>; + + cros_ec: ec@0 { + compatible = "google,cros-ec-spi"; + reg = <0>; + interrupts-extended = <&pio 5 IRQ_TYPE_LEVEL_LOW>; + spi-max-frequency = <3000000>; + pinctrl-names = "default"; + pinctrl-0 = <&cros_ec_int>; + + #address-cells = <1>; + #size-cells = <0>; + + base_detection: cbas { + compatible = "google,cros-cbas"; + }; + + cros_ec_pwm: pwm { + compatible = "google,cros-ec-pwm"; + #pwm-cells = <1>; + + status = "disabled"; + }; + + i2c_tunnel: i2c-tunnel { + compatible = "google,cros-ec-i2c-tunnel"; + google,remote-bus = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mt6360_ldo3_reg: regulator@0 { + compatible = "google,cros-ec-regulator"; + reg = <0>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + mt6360_ldo5_reg: regulator@1 { + compatible = "google,cros-ec-regulator"; + reg = <1>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + typec { + compatible = "google,cros-ec-typec"; + #address-cells = <1>; + #size-cells = <0>; + + usb_c0: connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + label = "left"; + power-role = "dual"; + data-role = "host"; + try-power-role = "source"; + }; + + usb_c1: connector@1 { + compatible = "usb-c-connector"; + reg = <1>; + label = "right"; + power-role = "dual"; + data-role = "host"; + try-power-role = "source"; + }; + }; + }; +}; + +&spi5 { + status = "okay"; + + cs-gpios = <&pio 37 GPIO_ACTIVE_LOW>; + mediatek,pad-select = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi5_pins>; + + cr50@0 { + compatible = "google,cr50"; + reg = <0>; + interrupts-extended = <&pio 171 IRQ_TYPE_EDGE_RISING>; + spi-max-frequency = <1000000>; + pinctrl-names = "default"; + pinctrl-0 = <&cr50_int>; + }; +}; + +&spmi { + #address-cells = <2>; + #size-cells = <0>; + + mt6315_6: pmic@6 { + compatible = "mediatek,mt6315-regulator"; + reg = <0x6 SPMI_USID>; + + regulators { + mt6315_6_vbuck1: vbuck1 { + regulator-compatible = "vbuck1"; + regulator-name = "Vbcpu"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1193750>; + regulator-enable-ramp-delay = <256>; + regulator-allowed-modes = <0 1 2>; + regulator-always-on; + }; + + mt6315_6_vbuck3: vbuck3 { + regulator-compatible = "vbuck3"; + regulator-name = "Vlcpu"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1193750>; + regulator-enable-ramp-delay = <256>; + regulator-allowed-modes = <0 1 2>; + regulator-always-on; + }; + }; + }; + + mt6315_7: pmic@7 { + compatible = "mediatek,mt6315-regulator"; + reg = <0x7 SPMI_USID>; + + regulators { + mt6315_7_vbuck1: vbuck1 { + regulator-compatible = "vbuck1"; + regulator-name = "Vgpu"; + regulator-min-microvolt = <606250>; + regulator-max-microvolt = <1193750>; + regulator-enable-ramp-delay = <256>; + regulator-allowed-modes = <0 1 2>; + }; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&xhci { + status = "okay"; + + wakeup-source; + vusb33-supply = <&pp3300_g>; + vbus-supply = <&pp5000_a>; +}; + +#include <arm/cros-ec-keyboard.dtsi> +#include <arm/cros-ec-sbs.dtsi> diff --git a/dts/src/arm64/mediatek/mt8192.dtsi b/dts/src/arm64/mediatek/mt8192.dtsi index 733aec2e7f..cbae5a5ee4 100644 --- a/dts/src/arm64/mediatek/mt8192.dtsi +++ b/dts/src/arm64/mediatek/mt8192.dtsi @@ -43,7 +43,7 @@ reg = <0x000>; enable-method = "psci"; clock-frequency = <1701000000>; - cpu-idle-states = <&cpuoff_l &clusteroff_l>; + cpu-idle-states = <&cpu_sleep_l &cluster_sleep_l>; next-level-cache = <&l2_0>; capacity-dmips-mhz = <530>; }; @@ -54,7 +54,7 @@ reg = <0x100>; enable-method = "psci"; clock-frequency = <1701000000>; - cpu-idle-states = <&cpuoff_l &clusteroff_l>; + cpu-idle-states = <&cpu_sleep_l &cluster_sleep_l>; next-level-cache = <&l2_0>; capacity-dmips-mhz = <530>; }; @@ -65,7 +65,7 @@ reg = <0x200>; enable-method = "psci"; clock-frequency = <1701000000>; - cpu-idle-states = <&cpuoff_l &clusteroff_l>; + cpu-idle-states = <&cpu_sleep_l &cluster_sleep_l>; next-level-cache = <&l2_0>; capacity-dmips-mhz = <530>; }; @@ -76,7 +76,7 @@ reg = <0x300>; enable-method = "psci"; clock-frequency = <1701000000>; - cpu-idle-states = <&cpuoff_l &clusteroff_l>; + cpu-idle-states = <&cpu_sleep_l &cluster_sleep_l>; next-level-cache = <&l2_0>; capacity-dmips-mhz = <530>; }; @@ -87,7 +87,7 @@ reg = <0x400>; enable-method = "psci"; clock-frequency = <2171000000>; - cpu-idle-states = <&cpuoff_b &clusteroff_b>; + cpu-idle-states = <&cpu_sleep_b &cluster_sleep_b>; next-level-cache = <&l2_1>; capacity-dmips-mhz = <1024>; }; @@ -98,7 +98,7 @@ reg = <0x500>; enable-method = "psci"; clock-frequency = <2171000000>; - cpu-idle-states = <&cpuoff_b &clusteroff_b>; + cpu-idle-states = <&cpu_sleep_b &cluster_sleep_b>; next-level-cache = <&l2_1>; capacity-dmips-mhz = <1024>; }; @@ -109,7 +109,7 @@ reg = <0x600>; enable-method = "psci"; clock-frequency = <2171000000>; - cpu-idle-states = <&cpuoff_b &clusteroff_b>; + cpu-idle-states = <&cpu_sleep_b &cluster_sleep_b>; next-level-cache = <&l2_1>; capacity-dmips-mhz = <1024>; }; @@ -120,7 +120,7 @@ reg = <0x700>; enable-method = "psci"; clock-frequency = <2171000000>; - cpu-idle-states = <&cpuoff_b &clusteroff_b>; + cpu-idle-states = <&cpu_sleep_b &cluster_sleep_b>; next-level-cache = <&l2_1>; capacity-dmips-mhz = <1024>; }; @@ -172,8 +172,8 @@ }; idle-states { - entry-method = "arm,psci"; - cpuoff_l: cpuoff_l { + entry-method = "psci"; + cpu_sleep_l: cpu-sleep-l { compatible = "arm,idle-state"; arm,psci-suspend-param = <0x00010001>; local-timer-stop; @@ -181,7 +181,7 @@ exit-latency-us = <140>; min-residency-us = <780>; }; - cpuoff_b: cpuoff_b { + cpu_sleep_b: cpu-sleep-b { compatible = "arm,idle-state"; arm,psci-suspend-param = <0x00010001>; local-timer-stop; @@ -189,7 +189,7 @@ exit-latency-us = <145>; min-residency-us = <720>; }; - clusteroff_l: clusteroff_l { + cluster_sleep_l: cluster-sleep-l { compatible = "arm,idle-state"; arm,psci-suspend-param = <0x01010002>; local-timer-stop; @@ -197,7 +197,7 @@ exit-latency-us = <155>; min-residency-us = <860>; }; - clusteroff_b: clusteroff_b { + cluster_sleep_b: cluster-sleep-b { compatible = "arm,idle-state"; arm,psci-suspend-param = <0x01010002>; local-timer-stop; @@ -271,6 +271,7 @@ compatible = "mediatek,mt8192-infracfg", "syscon"; reg = <0 0x10001000 0 0x1000>; #clock-cells = <1>; + #reset-cells = <1>; }; pericfg: syscon@10003000 { @@ -911,7 +912,7 @@ }; efuse: efuse@11c10000 { - compatible = "mediatek,efuse"; + compatible = "mediatek,mt8192-efuse", "mediatek,efuse"; reg = <0 0x11c10000 0 0x1000>; #address-cells = <1>; #size-cells = <1>; diff --git a/dts/src/arm64/mediatek/mt8195-cherry-tomato-r1.dts b/dts/src/arm64/mediatek/mt8195-cherry-tomato-r1.dts new file mode 100644 index 0000000000..3348ba69ff --- /dev/null +++ b/dts/src/arm64/mediatek/mt8195-cherry-tomato-r1.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2021 MediaTek Inc. + */ +/dts-v1/; +#include "mt8195-cherry.dtsi" + +/ { + model = "Acer Tomato (rev1) board"; + compatible = "google,tomato-rev1", "google,tomato", "mediatek,mt8195"; +}; + +&ts_10 { + status = "okay"; +}; diff --git a/dts/src/arm64/mediatek/mt8195-cherry-tomato-r2.dts b/dts/src/arm64/mediatek/mt8195-cherry-tomato-r2.dts new file mode 100644 index 0000000000..4669e9d917 --- /dev/null +++ b/dts/src/arm64/mediatek/mt8195-cherry-tomato-r2.dts @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2021 MediaTek Inc. + */ +/dts-v1/; +#include "mt8195-cherry.dtsi" + +/ { + model = "Acer Tomato (rev2) board"; + compatible = "google,tomato-rev2", "google,tomato", "mediatek,mt8195"; +}; + +&pio_default { + pins-low-power-hdmi-disable { + pinmux = <PINMUX_GPIO31__FUNC_GPIO31>, + <PINMUX_GPIO32__FUNC_GPIO32>, + <PINMUX_GPIO33__FUNC_GPIO33>, + <PINMUX_GPIO34__FUNC_GPIO34>, + <PINMUX_GPIO35__FUNC_GPIO35>; + input-enable; + bias-pull-down; + }; + + pins-low-power-pcie0-disable { + pinmux = <PINMUX_GPIO19__FUNC_GPIO19>, + <PINMUX_GPIO20__FUNC_GPIO20>, + <PINMUX_GPIO21__FUNC_GPIO21>; + input-enable; + bias-pull-down; + }; +}; + +&ts_10 { + status = "okay"; +}; diff --git a/dts/src/arm64/mediatek/mt8195-cherry-tomato-r3.dts b/dts/src/arm64/mediatek/mt8195-cherry-tomato-r3.dts new file mode 100644 index 0000000000..5021edd02f --- /dev/null +++ b/dts/src/arm64/mediatek/mt8195-cherry-tomato-r3.dts @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2021 MediaTek Inc. + */ +/dts-v1/; +#include "mt8195-cherry.dtsi" + +/ { + model = "Acer Tomato (rev3 - 4) board"; + compatible = "google,tomato-rev4", "google,tomato-rev3", + "google,tomato", "mediatek,mt8195"; +}; + +&pio_default { + pins-low-power-hdmi-disable { + pinmux = <PINMUX_GPIO31__FUNC_GPIO31>, + <PINMUX_GPIO32__FUNC_GPIO32>, + <PINMUX_GPIO33__FUNC_GPIO33>, + <PINMUX_GPIO34__FUNC_GPIO34>, + <PINMUX_GPIO35__FUNC_GPIO35>; + input-enable; + bias-pull-down; + }; + + pins-low-power-pcie0-disable { + pinmux = <PINMUX_GPIO19__FUNC_GPIO19>, + <PINMUX_GPIO20__FUNC_GPIO20>, + <PINMUX_GPIO21__FUNC_GPIO21>; + input-enable; + bias-pull-down; + }; +}; + +&ts_10 { + status = "okay"; +}; diff --git a/dts/src/arm64/mediatek/mt8195-cherry.dtsi b/dts/src/arm64/mediatek/mt8195-cherry.dtsi new file mode 100644 index 0000000000..fcc6006743 --- /dev/null +++ b/dts/src/arm64/mediatek/mt8195-cherry.dtsi @@ -0,0 +1,702 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2021 MediaTek Inc. + */ + +#include <dt-bindings/gpio/gpio.h> +#include "mt8195.dtsi" +#include "mt6359.dtsi" + +/ { + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c7 = &i2c7; + mmc0 = &mmc0; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x80000000>; + }; + + /* system wide LDO 3.3V power rail */ + pp3300_z5: regulator-pp3300-ldo-z5 { + compatible = "regulator-fixed"; + regulator-name = "pp3300_ldo_z5"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&ppvar_sys>; + }; + + /* separately switched 3.3V power rail */ + pp3300_s3: regulator-pp3300-s3 { + compatible = "regulator-fixed"; + regulator-name = "pp3300_s3"; + /* automatically sequenced by PMIC EXT_PMIC_EN2 */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&pp3300_z2>; + }; + + /* system wide 3.3V power rail */ + pp3300_z2: regulator-pp3300-z2 { + compatible = "regulator-fixed"; + regulator-name = "pp3300_z2"; + /* EN pin tied to pp4200_z2, which is controlled by EC */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&ppvar_sys>; + }; + + /* system wide 4.2V power rail */ + pp4200_z2: regulator-pp4200-z2 { + compatible = "regulator-fixed"; + regulator-name = "pp4200_z2"; + /* controlled by EC */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <4200000>; + regulator-max-microvolt = <4200000>; + vin-supply = <&ppvar_sys>; + }; + + /* system wide switching 5.0V power rail */ + pp5000_s5: regulator-pp5000-s5 { + compatible = "regulator-fixed"; + regulator-name = "pp5000_s5"; + /* controlled by EC */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&ppvar_sys>; + }; + + /* system wide semi-regulated power rail from battery or USB */ + ppvar_sys: regulator-ppvar-sys { + compatible = "regulator-fixed"; + regulator-name = "ppvar_sys"; + regulator-always-on; + regulator-boot-on; + }; + + usb_vbus: regulator-5v0-usb-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + }; +}; + +&i2c0 { + status = "okay"; + + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; +}; + +&i2c1 { + status = "okay"; + + clock-frequency = <400000>; + i2c-scl-internal-delay-ns = <12500>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; +}; + +&i2c2 { + status = "okay"; + + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; +}; + +&i2c3 { + status = "okay"; + + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; +}; + +&i2c4 { + status = "okay"; + + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins>; + + ts_10: touchscreen@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + hid-descr-addr = <0x0001>; + interrupts-extended = <&pio 92 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen_pins>; + post-power-on-delay-ms = <10>; + vdd-supply = <&pp3300_s3>; + status = "disabled"; + }; +}; + +&i2c5 { + status = "okay"; + + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_pins>; +}; + +&i2c7 { + status = "okay"; + + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c7_pins>; + + pmic@34 { + #interrupt-cells = <1>; + compatible = "mediatek,mt6360"; + reg = <0x34>; + interrupt-controller; + interrupts-extended = <&pio 130 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "IRQB"; + pinctrl-names = "default"; + pinctrl-0 = <&subpmic_default>; + wakeup-source; + }; +}; + +&mmc0 { + status = "okay"; + + bus-width = <8>; + cap-mmc-highspeed; + cap-mmc-hw-reset; + hs400-ds-delay = <0x14c11>; + max-frequency = <200000000>; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + no-sdio; + no-sd; + non-removable; + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc0_pins_default>; + pinctrl-1 = <&mmc0_pins_uhs>; + vmmc-supply = <&mt6359_vemc_1_ldo_reg>; + vqmmc-supply = <&mt6359_vufs_ldo_reg>; +}; + +/* for CPU-L */ +&mt6359_vcore_buck_reg { + regulator-always-on; +}; + +/* for CORE */ +&mt6359_vgpu11_buck_reg { + regulator-always-on; +}; + +&mt6359_vgpu11_sshub_buck_reg { + regulator-always-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <550000>; +}; + +/* for CORE SRAM */ +&mt6359_vpu_buck_reg { + regulator-always-on; +}; + +&mt6359_vrf12_ldo_reg { + regulator-always-on; +}; + +/* for GPU SRAM */ +&mt6359_vsram_others_ldo_reg { + regulator-always-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; +}; + +&mt6359_vufs_ldo_reg { + regulator-always-on; +}; + +&nor_flash { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&nor_pins_default>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <52000000>; + spi-rx-bus-width = <2>; + spi-tx-bus-width = <2>; + }; +}; + +&pio { + mediatek,rsel-resistance-in-si-unit; + pinctrl-names = "default"; + pinctrl-0 = <&pio_default>; + + /* 144 lines */ + gpio-line-names = + "I2S_SPKR_MCLK", + "I2S_SPKR_DATAIN", + "I2S_SPKR_LRCK", + "I2S_SPKR_BCLK", + "EC_AP_INT_ODL", + /* + * AP_FLASH_WP_L is crossystem ABI. Schematics + * call it AP_FLASH_WP_ODL. + */ + "AP_FLASH_WP_L", + "TCHPAD_INT_ODL", + "EDP_HPD_1V8", + "AP_I2C_CAM_SDA", + "AP_I2C_CAM_SCL", + "AP_I2C_TCHPAD_SDA_1V8", + "AP_I2C_TCHPAD_SCL_1V8", + "AP_I2C_AUD_SDA", + "AP_I2C_AUD_SCL", + "AP_I2C_TPM_SDA_1V8", + "AP_I2C_TPM_SCL_1V8", + "AP_I2C_TCHSCR_SDA_1V8", + "AP_I2C_TCHSCR_SCL_1V8", + "EC_AP_HPD_OD", + "", + "PCIE_NVME_RST_L", + "PCIE_NVME_CLKREQ_ODL", + "PCIE_RST_1V8_L", + "PCIE_CLKREQ_1V8_ODL", + "PCIE_WAKE_1V8_ODL", + "CLK_24M_CAM0", + "CAM1_SEN_EN", + "AP_I2C_PWR_SCL_1V8", + "AP_I2C_PWR_SDA_1V8", + "AP_I2C_MISC_SCL", + "AP_I2C_MISC_SDA", + "EN_PP5000_HDMI_X", + "AP_HDMITX_HTPLG", + "", + "AP_HDMITX_SCL_1V8", + "AP_HDMITX_SDA_1V8", + "AP_RTC_CLK32K", + "AP_EC_WATCHDOG_L", + "SRCLKENA0", + "SRCLKENA1", + "PWRAP_SPI0_CS_L", + "PWRAP_SPI0_CK", + "PWRAP_SPI0_MOSI", + "PWRAP_SPI0_MISO", + "SPMI_SCL", + "SPMI_SDA", + "", + "", + "", + "I2S_HP_DATAIN", + "I2S_HP_MCLK", + "I2S_HP_BCK", + "I2S_HP_LRCK", + "I2S_HP_DATAOUT", + "SD_CD_ODL", + "EN_PP3300_DISP_X", + "TCHSCR_RST_1V8_L", + "TCHSCR_REPORT_DISABLE", + "EN_PP3300_WLAN_X", + "BT_KILL_1V8_L", + "I2S_SPKR_DATAOUT", + "WIFI_KILL_1V8_L", + "BEEP_ON", + "SCP_I2C_SENSOR_SCL_1V8", + "SCP_I2C_SENSOR_SDA_1V8", + "", + "", + "", + "", + "AUD_CLK_MOSI", + "AUD_SYNC_MOSI", + "AUD_DAT_MOSI0", + "AUD_DAT_MOSI1", + "AUD_DAT_MISO0", + "AUD_DAT_MISO1", + "AUD_DAT_MISO2", + "SCP_VREQ_VAO", + "AP_SPI_GSC_TPM_CLK", + "AP_SPI_GSC_TPM_MOSI", + "AP_SPI_GSC_TPM_CS_L", + "AP_SPI_GSC_TPM_MISO", + "EN_PP1000_CAM_X", + "AP_EDP_BKLTEN", + "", + "USB3_HUB_RST_L", + "", + "WLAN_ALERT_ODL", + "EC_IN_RW_ODL", + "GSC_AP_INT_ODL", + "HP_INT_ODL", + "CAM0_RST_L", + "CAM1_RST_L", + "TCHSCR_INT_1V8_L", + "CAM1_DET_L", + "RST_ALC1011_L", + "", + "", + "BL_PWM_1V8", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "EN_SPKR", + "AP_EC_WARM_RST_REQ", + "UART_SCP_TX_DBGCON_RX", + "UART_DBGCON_TX_SCP_RX", + "", + "", + "KPCOL0", + "", + "MT6315_GPU_INT", + "MT6315_PROC_BC_INT", + "SD_CMD", + "SD_CLK", + "SD_DAT0", + "SD_DAT1", + "SD_DAT2", + "SD_DAT3", + "EMMC_DAT7", + "EMMC_DAT6", + "EMMC_DAT5", + "EMMC_DAT4", + "EMMC_RSTB", + "EMMC_CMD", + "EMMC_CLK", + "EMMC_DAT3", + "EMMC_DAT2", + "EMMC_DAT1", + "EMMC_DAT0", + "EMMC_DSL", + "", + "", + "MT6360_INT_ODL", + "SCP_JTAG0_TRSTN", + "AP_SPI_EC_CS_L", + "AP_SPI_EC_CLK", + "AP_SPI_EC_MOSI", + "AP_SPI_EC_MISO", + "SCP_JTAG0_TMS", + "SCP_JTAG0_TCK", + "SCP_JTAG0_TDO", + "SCP_JTAG0_TDI", + "AP_SPI_FLASH_CS_L", + "AP_SPI_FLASH_CLK", + "AP_SPI_FLASH_MOSI", + "AP_SPI_FLASH_MISO"; + + i2c0_pins: i2c0-default-pins { + pins-bus { + pinmux = <PINMUX_GPIO8__FUNC_SDA0>, + <PINMUX_GPIO9__FUNC_SCL0>; + bias-disable; + drive-strength-microamp = <1000>; + }; + }; + + i2c1_pins: i2c1-default-pins { + pins-bus { + pinmux = <PINMUX_GPIO10__FUNC_SDA1>, + <PINMUX_GPIO11__FUNC_SCL1>; + bias-pull-up = <1000>; + drive-strength-microamp = <1000>; + }; + }; + + i2c2_pins: i2c2-default-pins { + pins-bus { + pinmux = <PINMUX_GPIO12__FUNC_SDA2>, + <PINMUX_GPIO13__FUNC_SCL2>; + bias-disable; + drive-strength-microamp = <1000>; + }; + }; + + i2c3_pins: i2c3-default-pins { + pins-bus { + pinmux = <PINMUX_GPIO14__FUNC_SDA3>, + <PINMUX_GPIO15__FUNC_SCL3>; + bias-pull-up = <1000>; + drive-strength-microamp = <1000>; + }; + }; + + i2c4_pins: i2c4-default-pins { + pins-bus { + pinmux = <PINMUX_GPIO16__FUNC_SDA4>, + <PINMUX_GPIO17__FUNC_SCL4>; + bias-pull-up = <1000>; + drive-strength = <4>; + }; + }; + + i2c5_pins: i2c5-default-pins { + pins-bus { + pinmux = <PINMUX_GPIO29__FUNC_SCL5>, + <PINMUX_GPIO30__FUNC_SDA5>; + bias-disable; + drive-strength-microamp = <1000>; + }; + }; + + i2c7_pins: i2c7-default-pins { + pins-bus { + pinmux = <PINMUX_GPIO27__FUNC_SCL7>, + <PINMUX_GPIO28__FUNC_SDA7>; + bias-disable; + }; + }; + + mmc0_pins_default: mmc0-default-pins { + pins-cmd-dat { + pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>, + <PINMUX_GPIO125__FUNC_MSDC0_DAT1>, + <PINMUX_GPIO124__FUNC_MSDC0_DAT2>, + <PINMUX_GPIO123__FUNC_MSDC0_DAT3>, + <PINMUX_GPIO119__FUNC_MSDC0_DAT4>, + <PINMUX_GPIO118__FUNC_MSDC0_DAT5>, + <PINMUX_GPIO117__FUNC_MSDC0_DAT6>, + <PINMUX_GPIO116__FUNC_MSDC0_DAT7>, + <PINMUX_GPIO121__FUNC_MSDC0_CMD>; + input-enable; + drive-strength = <6>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins-clk { + pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>; + drive-strength = <6>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-rst { + pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>; + drive-strength = <6>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + mmc0_pins_uhs: mmc0-uhs-pins { + pins-cmd-dat { + pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>, + <PINMUX_GPIO125__FUNC_MSDC0_DAT1>, + <PINMUX_GPIO124__FUNC_MSDC0_DAT2>, + <PINMUX_GPIO123__FUNC_MSDC0_DAT3>, + <PINMUX_GPIO119__FUNC_MSDC0_DAT4>, + <PINMUX_GPIO118__FUNC_MSDC0_DAT5>, + <PINMUX_GPIO117__FUNC_MSDC0_DAT6>, + <PINMUX_GPIO116__FUNC_MSDC0_DAT7>, + <PINMUX_GPIO121__FUNC_MSDC0_CMD>; + input-enable; + drive-strength = <8>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins-clk { + pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>; + drive-strength = <8>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-ds { + pinmux = <PINMUX_GPIO127__FUNC_MSDC0_DSL>; + drive-strength = <8>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-rst { + pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>; + drive-strength = <8>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + nor_pins_default: nor-default-pins { + pins-ck-io { + pinmux = <PINMUX_GPIO142__FUNC_SPINOR_IO0>, + <PINMUX_GPIO141__FUNC_SPINOR_CK>, + <PINMUX_GPIO143__FUNC_SPINOR_IO1>; + drive-strength = <6>; + bias-pull-down; + }; + + pins-cs { + pinmux = <PINMUX_GPIO140__FUNC_SPINOR_CS>; + drive-strength = <6>; + bias-pull-up; + }; + }; + + pio_default: pio-default-pins { + pins-wifi-enable { + pinmux = <PINMUX_GPIO58__FUNC_GPIO58>; + output-high; + drive-strength = <14>; + }; + + pins-low-power-pd { + pinmux = <PINMUX_GPIO25__FUNC_GPIO25>, + <PINMUX_GPIO26__FUNC_GPIO26>, + <PINMUX_GPIO46__FUNC_GPIO46>, + <PINMUX_GPIO47__FUNC_GPIO47>, + <PINMUX_GPIO48__FUNC_GPIO48>, + <PINMUX_GPIO65__FUNC_GPIO65>, + <PINMUX_GPIO66__FUNC_GPIO66>, + <PINMUX_GPIO67__FUNC_GPIO67>, + <PINMUX_GPIO68__FUNC_GPIO68>, + <PINMUX_GPIO128__FUNC_GPIO128>, + <PINMUX_GPIO129__FUNC_GPIO129>; + input-enable; + bias-pull-down; + }; + + pins-low-power-pupd { + pinmux = <PINMUX_GPIO77__FUNC_GPIO77>, + <PINMUX_GPIO78__FUNC_GPIO78>, + <PINMUX_GPIO79__FUNC_GPIO79>, + <PINMUX_GPIO80__FUNC_GPIO80>, + <PINMUX_GPIO83__FUNC_GPIO83>, + <PINMUX_GPIO85__FUNC_GPIO85>, + <PINMUX_GPIO90__FUNC_GPIO90>, + <PINMUX_GPIO91__FUNC_GPIO91>, + <PINMUX_GPIO93__FUNC_GPIO93>, + <PINMUX_GPIO94__FUNC_GPIO94>, + <PINMUX_GPIO95__FUNC_GPIO95>, + <PINMUX_GPIO96__FUNC_GPIO96>, + <PINMUX_GPIO104__FUNC_GPIO104>, + <PINMUX_GPIO105__FUNC_GPIO105>, + <PINMUX_GPIO107__FUNC_GPIO107>; + input-enable; + bias-pull-down = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + spi0_pins: spi0-default-pins { + pins-cs-mosi-clk { + pinmux = <PINMUX_GPIO132__FUNC_SPIM0_CSB>, + <PINMUX_GPIO134__FUNC_SPIM0_MO>, + <PINMUX_GPIO133__FUNC_SPIM0_CLK>; + bias-disable; + }; + + pins-miso { + pinmux = <PINMUX_GPIO135__FUNC_SPIM0_MI>; + bias-pull-down; + }; + }; + + subpmic_default: subpmic-default-pins { + subpmic_pin_irq: pins-subpmic-int-n { + pinmux = <PINMUX_GPIO130__FUNC_GPIO130>; + input-enable; + bias-pull-up; + }; + }; + + touchscreen_pins: touchscreen-default-pins { + pins-int-n { + pinmux = <PINMUX_GPIO92__FUNC_GPIO92>; + input-enable; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + pins-rst { + pinmux = <PINMUX_GPIO56__FUNC_GPIO56>; + output-high; + }; + pins-report-sw { + pinmux = <PINMUX_GPIO57__FUNC_GPIO57>; + output-low; + }; + }; +}; + +&pmic { + interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>; +}; + +&spi0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + mediatek,pad-select = <0>; +}; + +&u3phy0 { + status = "okay"; +}; + +&u3phy1 { + status = "okay"; +}; + +&u3phy2 { + status = "okay"; +}; + +&u3phy3 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&xhci0 { + status = "okay"; + + vusb33-supply = <&mt6359_vusb_ldo_reg>; + vbus-supply = <&usb_vbus>; +}; + +&xhci1 { + status = "okay"; + + vusb33-supply = <&mt6359_vusb_ldo_reg>; + vbus-supply = <&usb_vbus>; +}; + +&xhci2 { + status = "okay"; + + vusb33-supply = <&mt6359_vusb_ldo_reg>; + vbus-supply = <&usb_vbus>; +}; + +&xhci3 { + status = "okay"; + + /* MT7921's USB Bluetooth has issues with USB2 LPM */ + usb2-lpm-disable; + vusb33-supply = <&mt6359_vusb_ldo_reg>; + vbus-supply = <&usb_vbus>; +}; diff --git a/dts/src/arm64/mediatek/mt8195-evb.dts b/dts/src/arm64/mediatek/mt8195-evb.dts index db25a515e4..690dc7717f 100644 --- a/dts/src/arm64/mediatek/mt8195-evb.dts +++ b/dts/src/arm64/mediatek/mt8195-evb.dts @@ -139,19 +139,19 @@ }; &u3phy0 { - status="okay"; + status = "okay"; }; &u3phy1 { - status="okay"; + status = "okay"; }; &u3phy2 { - status="okay"; + status = "okay"; }; &u3phy3 { - status="okay"; + status = "okay"; }; &uart0 { diff --git a/dts/src/arm64/mediatek/mt8195.dtsi b/dts/src/arm64/mediatek/mt8195.dtsi index b57e620c2c..066c149897 100644 --- a/dts/src/arm64/mediatek/mt8195.dtsi +++ b/dts/src/arm64/mediatek/mt8195.dtsi @@ -10,7 +10,6 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/phy/phy.h> #include <dt-bindings/pinctrl/mt8195-pinfunc.h> -#include <dt-bindings/reset/ti-syscon.h> / { compatible = "mediatek,mt8195"; @@ -295,17 +294,7 @@ compatible = "mediatek,mt8195-infracfg_ao", "syscon", "simple-mfd"; reg = <0 0x10001000 0 0x1000>; #clock-cells = <1>; - - infracfg_rst: reset-controller { - compatible = "ti,syscon-reset"; - #reset-cells = <1>; - ti,reset-bits = < - 0x140 18 0x144 18 0 0 (ASSERT_SET | DEASSERT_SET | STATUS_NONE) /* pcie */ - 0x120 0 0x124 0 0 0 (ASSERT_SET | DEASSERT_SET | STATUS_NONE) /* thermal */ - 0x730 10 0x734 10 0 0 (ASSERT_SET | DEASSERT_SET | STATUS_NONE) /* thermal */ - 0x150 5 0x154 5 0 0 (ASSERT_SET | DEASSERT_SET | STATUS_NONE) /* svs gpu */ - >; - }; + #reset-cells = <1>; }; pericfg: syscon@10003000 { @@ -573,6 +562,8 @@ <&apmixedsys CLK_APMIXED_USB1PLL>, <&infracfg_ao CLK_INFRA_AO_SSUSB_XHCI>; clock-names = "sys_ck", "ref_ck", "mcu_ck", "xhci_ck"; + mediatek,syscon-wakeup = <&pericfg 0x400 103>; + wakeup-source; status = "disabled"; }; @@ -636,6 +627,8 @@ <&apmixedsys CLK_APMIXED_USB1PLL>, <&pericfg_ao CLK_PERI_AO_SSUSB_1P_XHCI>; clock-names = "sys_ck", "ref_ck", "mcu_ck","xhci_ck"; + mediatek,syscon-wakeup = <&pericfg 0x400 104>; + wakeup-source; status = "disabled"; }; @@ -655,6 +648,8 @@ <&topckgen CLK_TOP_SSUSB_P2_REF>, <&pericfg_ao CLK_PERI_AO_SSUSB_2P_XHCI>; clock-names = "sys_ck", "ref_ck", "xhci_ck"; + mediatek,syscon-wakeup = <&pericfg 0x400 105>; + wakeup-source; status = "disabled"; }; @@ -674,6 +669,8 @@ <&topckgen CLK_TOP_SSUSB_P3_REF>, <&pericfg_ao CLK_PERI_AO_SSUSB_3P_XHCI>; clock-names = "sys_ck", "ref_ck", "xhci_ck"; + mediatek,syscon-wakeup = <&pericfg 0x400 106>; + wakeup-source; status = "disabled"; }; @@ -691,6 +688,53 @@ status = "disabled"; }; + efuse: efuse@11c10000 { + compatible = "mediatek,mt8195-efuse", "mediatek,efuse"; + reg = <0 0x11c10000 0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + u3_tx_imp_p0: usb3-tx-imp@184,1 { + reg = <0x184 0x1>; + bits = <0 5>; + }; + u3_rx_imp_p0: usb3-rx-imp@184,2 { + reg = <0x184 0x2>; + bits = <5 5>; + }; + u3_intr_p0: usb3-intr@185 { + reg = <0x185 0x1>; + bits = <2 6>; + }; + comb_tx_imp_p1: usb3-tx-imp@186,1 { + reg = <0x186 0x1>; + bits = <0 5>; + }; + comb_rx_imp_p1: usb3-rx-imp@186,2 { + reg = <0x186 0x2>; + bits = <5 5>; + }; + comb_intr_p1: usb3-intr@187 { + reg = <0x187 0x1>; + bits = <2 6>; + }; + u2_intr_p0: usb2-intr-p0@188,1 { + reg = <0x188 0x1>; + bits = <0 5>; + }; + u2_intr_p1: usb2-intr-p1@188,2 { + reg = <0x188 0x2>; + bits = <5 5>; + }; + u2_intr_p2: usb2-intr-p2@189,1 { + reg = <0x189 0x1>; + bits = <2 5>; + }; + u2_intr_p3: usb2-intr-p3@189,2 { + reg = <0x189 0x2>; + bits = <7 5>; + }; + }; + u3phy2: t-phy@11c40000 { compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v3"; #address-cells = <1>; @@ -873,6 +917,10 @@ clocks = <&apmixedsys CLK_APMIXED_PLL_SSUSB26M>, <&topckgen CLK_TOP_SSUSB_PHY_P1_REF>; clock-names = "ref", "da_ref"; + nvmem-cells = <&comb_intr_p1>, + <&comb_rx_imp_p1>, + <&comb_tx_imp_p1>; + nvmem-cell-names = "intr", "rx_imp", "tx_imp"; #phy-cells = <1>; }; }; @@ -897,6 +945,10 @@ clocks = <&apmixedsys CLK_APMIXED_PLL_SSUSB26M>, <&topckgen CLK_TOP_SSUSB_PHY_REF>; clock-names = "ref", "da_ref"; + nvmem-cells = <&u3_intr_p0>, + <&u3_rx_imp_p0>, + <&u3_tx_imp_p0>; + nvmem-cell-names = "intr", "rx_imp", "tx_imp"; #phy-cells = <1>; }; }; diff --git a/dts/src/arm64/mediatek/pumpkin-common.dtsi b/dts/src/arm64/mediatek/pumpkin-common.dtsi index 7a717f9269..8ee1529683 100644 --- a/dts/src/arm64/mediatek/pumpkin-common.dtsi +++ b/dts/src/arm64/mediatek/pumpkin-common.dtsi @@ -28,7 +28,7 @@ pinctrl-names = "default"; pinctrl-0 = <&gpio_keys_default>; - volume-up { + key-volume-up { gpios = <&pio 42 GPIO_ACTIVE_LOW>; label = "volume_up"; linux,code = <115>; @@ -36,7 +36,7 @@ debounce-interval = <15>; }; - volume-down { + key-volume-down { gpios = <&pio 43 GPIO_ACTIVE_LOW>; label = "volume_down"; linux,code = <114>; diff --git a/dts/src/arm64/microchip/sparx5_pcb134_board.dtsi b/dts/src/arm64/microchip/sparx5_pcb134_board.dtsi index 699256f1b9..bf12be5e8d 100644 --- a/dts/src/arm64/microchip/sparx5_pcb134_board.dtsi +++ b/dts/src/arm64/microchip/sparx5_pcb134_board.dtsi @@ -546,164 +546,164 @@ &axi { sfp_eth12: sfp-eth12 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp1>; + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp1>; tx-disable-gpios = <&sgpio_out2 11 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 11 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 11 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 12 0 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 11 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 11 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 12 0 GPIO_ACTIVE_HIGH>; }; sfp_eth13: sfp-eth13 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp2>; + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp2>; tx-disable-gpios = <&sgpio_out2 12 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 12 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 12 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 13 0 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 12 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 12 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 13 0 GPIO_ACTIVE_HIGH>; }; sfp_eth14: sfp-eth14 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp3>; + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp3>; tx-disable-gpios = <&sgpio_out2 13 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 13 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 13 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 14 0 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 13 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 13 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 14 0 GPIO_ACTIVE_HIGH>; }; sfp_eth15: sfp-eth15 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp4>; + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp4>; tx-disable-gpios = <&sgpio_out2 14 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 14 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 14 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 15 0 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 14 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 14 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 15 0 GPIO_ACTIVE_HIGH>; }; sfp_eth48: sfp-eth48 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp5>; + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp5>; tx-disable-gpios = <&sgpio_out2 15 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 15 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 15 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 16 0 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 15 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 15 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 16 0 GPIO_ACTIVE_HIGH>; }; sfp_eth49: sfp-eth49 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp6>; + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp6>; tx-disable-gpios = <&sgpio_out2 16 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 16 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 16 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 17 0 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 16 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 16 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 17 0 GPIO_ACTIVE_HIGH>; }; sfp_eth50: sfp-eth50 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp7>; + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp7>; tx-disable-gpios = <&sgpio_out2 17 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 17 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 17 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 18 0 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 17 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 17 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 18 0 GPIO_ACTIVE_HIGH>; }; sfp_eth51: sfp-eth51 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp8>; + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp8>; tx-disable-gpios = <&sgpio_out2 18 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 18 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 18 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 19 0 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 18 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 18 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 19 0 GPIO_ACTIVE_HIGH>; }; sfp_eth52: sfp-eth52 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp9>; + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp9>; tx-disable-gpios = <&sgpio_out2 19 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 19 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 19 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 20 0 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 19 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 19 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 20 0 GPIO_ACTIVE_HIGH>; }; sfp_eth53: sfp-eth53 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp10>; + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp10>; tx-disable-gpios = <&sgpio_out2 20 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 20 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 20 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 21 0 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 20 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 20 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 21 0 GPIO_ACTIVE_HIGH>; }; sfp_eth54: sfp-eth54 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp11>; + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp11>; tx-disable-gpios = <&sgpio_out2 21 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 21 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 21 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 22 0 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 21 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 21 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 22 0 GPIO_ACTIVE_HIGH>; }; sfp_eth55: sfp-eth55 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp12>; + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp12>; tx-disable-gpios = <&sgpio_out2 22 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 22 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 22 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 23 0 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 22 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 22 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 23 0 GPIO_ACTIVE_HIGH>; }; sfp_eth56: sfp-eth56 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp13>; + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp13>; tx-disable-gpios = <&sgpio_out2 23 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 23 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 23 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 24 0 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 23 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 23 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 24 0 GPIO_ACTIVE_HIGH>; }; sfp_eth57: sfp-eth57 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp14>; + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp14>; tx-disable-gpios = <&sgpio_out2 24 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 24 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 24 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 25 0 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 24 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 24 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 25 0 GPIO_ACTIVE_HIGH>; }; sfp_eth58: sfp-eth58 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp15>; + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp15>; tx-disable-gpios = <&sgpio_out2 25 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 25 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 25 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 26 0 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 25 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 25 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 26 0 GPIO_ACTIVE_HIGH>; }; sfp_eth59: sfp-eth59 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp16>; + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp16>; tx-disable-gpios = <&sgpio_out2 26 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 26 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 26 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 27 0 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 26 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 26 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 27 0 GPIO_ACTIVE_HIGH>; }; sfp_eth60: sfp-eth60 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp17>; + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp17>; tx-disable-gpios = <&sgpio_out2 27 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 27 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 27 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 27 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 27 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>; }; sfp_eth61: sfp-eth61 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp18>; + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp18>; tx-disable-gpios = <&sgpio_out2 28 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>; }; sfp_eth62: sfp-eth62 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp19>; + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp19>; tx-disable-gpios = <&sgpio_out2 29 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>; }; sfp_eth63: sfp-eth63 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp20>; + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp20>; tx-disable-gpios = <&sgpio_out2 30 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>; }; }; diff --git a/dts/src/arm64/microchip/sparx5_pcb135_board.dtsi b/dts/src/arm64/microchip/sparx5_pcb135_board.dtsi index d10a9172b5..ec90bda7ed 100644 --- a/dts/src/arm64/microchip/sparx5_pcb135_board.dtsi +++ b/dts/src/arm64/microchip/sparx5_pcb135_board.dtsi @@ -170,40 +170,40 @@ &axi { sfp_eth60: sfp-eth60 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp1>; - tx-disable-gpios = <&sgpio_out2 28 0 GPIO_ACTIVE_LOW>; + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp1>; + tx-disable-gpios = <&sgpio_out2 28 0 GPIO_ACTIVE_LOW>; rate-select0-gpios = <&sgpio_out2 28 1 GPIO_ACTIVE_HIGH>; - los-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_HIGH>; }; sfp_eth61: sfp-eth61 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp2>; - tx-disable-gpios = <&sgpio_out2 29 0 GPIO_ACTIVE_LOW>; + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp2>; + tx-disable-gpios = <&sgpio_out2 29 0 GPIO_ACTIVE_LOW>; rate-select0-gpios = <&sgpio_out2 29 1 GPIO_ACTIVE_HIGH>; - los-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_HIGH>; }; sfp_eth62: sfp-eth62 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp3>; - tx-disable-gpios = <&sgpio_out2 30 0 GPIO_ACTIVE_LOW>; + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp3>; + tx-disable-gpios = <&sgpio_out2 30 0 GPIO_ACTIVE_LOW>; rate-select0-gpios = <&sgpio_out2 30 1 GPIO_ACTIVE_HIGH>; - los-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_HIGH>; }; sfp_eth63: sfp-eth63 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp4>; - tx-disable-gpios = <&sgpio_out2 31 0 GPIO_ACTIVE_LOW>; + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp4>; + tx-disable-gpios = <&sgpio_out2 31 0 GPIO_ACTIVE_LOW>; rate-select0-gpios = <&sgpio_out2 31 1 GPIO_ACTIVE_HIGH>; - los-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 31 1 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 31 2 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 31 1 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 31 2 GPIO_ACTIVE_HIGH>; }; }; diff --git a/dts/src/arm64/nuvoton/nuvoton-common-npcm8xx.dtsi b/dts/src/arm64/nuvoton/nuvoton-common-npcm8xx.dtsi new file mode 100644 index 0000000000..aa7aac8c37 --- /dev/null +++ b/dts/src/arm64/nuvoton/nuvoton-common-npcm8xx.dtsi @@ -0,0 +1,170 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2021 Nuvoton Technology tomer.maimon@nuvoton.com + +#include <dt-bindings/clock/nuvoton,npcm845-clk.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&gic>; + + soc { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges; + + gcr: system-controller@f0800000 { + compatible = "nuvoton,npcm845-gcr", "syscon"; + reg = <0x0 0xf0800000 0x0 0x1000>; + }; + + gic: interrupt-controller@dfff9000 { + compatible = "arm,gic-400"; + reg = <0x0 0xdfff9000 0x0 0x1000>, + <0x0 0xdfffa000 0x0 0x2000>, + <0x0 0xdfffc000 0x0 0x2000>, + <0x0 0xdfffe000 0x0 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + #interrupt-cells = <3>; + interrupt-controller; + #address-cells = <0>; + ppi-partitions { + ppi_cluster0: interrupt-partition-0 { + affinity = <&cpu0 &cpu1 &cpu2 &cpu3>; + }; + }; + }; + }; + + ahb { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges; + + rstc: reset-controller@f0801000 { + compatible = "nuvoton,npcm845-reset"; + reg = <0x0 0xf0801000 0x0 0x78>; + #reset-cells = <2>; + nuvoton,sysgcr = <&gcr>; + }; + + clk: clock-controller@f0801000 { + compatible = "nuvoton,npcm845-clk"; + #clock-cells = <1>; + reg = <0x0 0xf0801000 0x0 0x1000>; + }; + + apb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges = <0x0 0x0 0xf0000000 0x00300000>, + <0xfff00000 0x0 0xfff00000 0x00016000>; + + timer0: timer@8000 { + compatible = "nuvoton,npcm845-timer"; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x8000 0x1C>; + clocks = <&clk NPCM8XX_CLK_REFCLK>; + clock-names = "refclk"; + }; + + serial0: serial@0 { + compatible = "nuvoton,npcm845-uart", "nuvoton,npcm750-uart"; + reg = <0x0 0x1000>; + clocks = <&clk NPCM8XX_CLK_UART>; + interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + status = "disabled"; + }; + + serial1: serial@1000 { + compatible = "nuvoton,npcm845-uart", "nuvoton,npcm750-uart"; + reg = <0x1000 0x1000>; + clocks = <&clk NPCM8XX_CLK_UART>; + interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + status = "disabled"; + }; + + serial2: serial@2000 { + compatible = "nuvoton,npcm845-uart", "nuvoton,npcm750-uart"; + reg = <0x2000 0x1000>; + clocks = <&clk NPCM8XX_CLK_UART>; + interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + status = "disabled"; + }; + + serial3: serial@3000 { + compatible = "nuvoton,npcm845-uart", "nuvoton,npcm750-uart"; + reg = <0x3000 0x1000>; + clocks = <&clk NPCM8XX_CLK_UART>; + interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + status = "disabled"; + }; + + serial4: serial@4000 { + compatible = "nuvoton,npcm845-uart", "nuvoton,npcm750-uart"; + reg = <0x4000 0x1000>; + clocks = <&clk NPCM8XX_CLK_UART>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + status = "disabled"; + }; + + serial5: serial@5000 { + compatible = "nuvoton,npcm845-uart", "nuvoton,npcm750-uart"; + reg = <0x5000 0x1000>; + clocks = <&clk NPCM8XX_CLK_UART>; + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + status = "disabled"; + }; + + serial6: serial@6000 { + compatible = "nuvoton,npcm845-uart", "nuvoton,npcm750-uart"; + reg = <0x6000 0x1000>; + clocks = <&clk NPCM8XX_CLK_UART>; + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + status = "disabled"; + }; + + watchdog0: watchdog@801c { + compatible = "nuvoton,npcm845-wdt", "nuvoton,npcm750-wdt"; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x801c 0x4>; + status = "disabled"; + clocks = <&clk NPCM8XX_CLK_REFCLK>; + syscon = <&gcr>; + }; + + watchdog1: watchdog@901c { + compatible = "nuvoton,npcm845-wdt", "nuvoton,npcm750-wdt"; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x901c 0x4>; + status = "disabled"; + clocks = <&clk NPCM8XX_CLK_REFCLK>; + syscon = <&gcr>; + }; + + watchdog2: watchdog@a01c { + compatible = "nuvoton,npcm845-wdt", "nuvoton,npcm750-wdt"; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xa01c 0x4>; + status = "disabled"; + clocks = <&clk NPCM8XX_CLK_REFCLK>; + syscon = <&gcr>; + }; + }; + }; +}; diff --git a/dts/src/arm64/nuvoton/nuvoton-npcm845-evb.dts b/dts/src/arm64/nuvoton/nuvoton-npcm845-evb.dts new file mode 100644 index 0000000000..a5ab2bc0f8 --- /dev/null +++ b/dts/src/arm64/nuvoton/nuvoton-npcm845-evb.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2021 Nuvoton Technology tomer.maimon@nuvoton.com + +/dts-v1/; +#include "nuvoton-npcm845.dtsi" + +/ { + model = "Nuvoton npcm845 Development Board (Device Tree)"; + compatible = "nuvoton,npcm845-evb", "nuvoton,npcm845"; + + aliases { + serial0 = &serial0; + }; + + chosen { + stdout-path = &serial0; + }; + + memory { + reg = <0x0 0x0 0x0 0x40000000>; + }; +}; + +&serial0 { + status = "okay"; +}; + +&watchdog1 { + status = "okay"; +}; diff --git a/dts/src/arm64/nuvoton/nuvoton-npcm845.dtsi b/dts/src/arm64/nuvoton/nuvoton-npcm845.dtsi new file mode 100644 index 0000000000..12118b75c0 --- /dev/null +++ b/dts/src/arm64/nuvoton/nuvoton-npcm845.dtsi @@ -0,0 +1,76 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2021 Nuvoton Technology tomer.maimon@nuvoton.com + +#include "nuvoton-common-npcm8xx.dtsi" + +/ { + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + clocks = <&clk NPCM8XX_CLK_CPU>; + reg = <0x0 0x0>; + next-level-cache = <&l2>; + enable-method = "psci"; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + clocks = <&clk NPCM8XX_CLK_CPU>; + reg = <0x0 0x1>; + next-level-cache = <&l2>; + enable-method = "psci"; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + clocks = <&clk NPCM8XX_CLK_CPU>; + reg = <0x0 0x2>; + next-level-cache = <&l2>; + enable-method = "psci"; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + clocks = <&clk NPCM8XX_CLK_CPU>; + reg = <0x0 0x3>; + next-level-cache = <&l2>; + enable-method = "psci"; + }; + + l2: l2-cache { + compatible = "cache"; + }; + }; + + arm-pmu { + compatible = "arm,cortex-a35-pmu"; + interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/dts/src/arm64/nvidia/tegra132-norrin.dts b/dts/src/arm64/nvidia/tegra132-norrin.dts index f16acb4cab..d461da0b80 100644 --- a/dts/src/arm64/nvidia/tegra132-norrin.dts +++ b/dts/src/arm64/nvidia/tegra132-norrin.dts @@ -1030,7 +1030,7 @@ gpio-keys { compatible = "gpio-keys"; - lid { + switch-lid { label = "Lid"; gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>; linux,input-type = <5>; @@ -1039,7 +1039,7 @@ wakeup-source; }; - power { + key-power { label = "Power"; gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; diff --git a/dts/src/arm64/nvidia/tegra186-p2771-0000.dts b/dts/src/arm64/nvidia/tegra186-p2771-0000.dts index 70737a09a9..47cf2013af 100644 --- a/dts/src/arm64/nvidia/tegra186-p2771-0000.dts +++ b/dts/src/arm64/nvidia/tegra186-p2771-0000.dts @@ -915,6 +915,22 @@ remote-endpoint = <&asrc_in7_ep>; }; }; + + xbar_ope1_in_port: port@70 { + reg = <0x70>; + + xbar_ope1_in_ep: endpoint { + remote-endpoint = <&ope1_cif_in_ep>; + }; + }; + + port@71 { + reg = <0x71>; + + xbar_ope1_out_ep: endpoint { + remote-endpoint = <&ope1_cif_out_ep>; + }; + }; }; admaif@290f000 { @@ -1911,6 +1927,31 @@ }; }; + processing-engine@2908000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + ope1_cif_in_ep: endpoint { + remote-endpoint = <&xbar_ope1_in_ep>; + }; + }; + + ope1_out_port: port@1 { + reg = <0x1>; + + ope1_cif_out_ep: endpoint { + remote-endpoint = <&xbar_ope1_out_ep>; + }; + }; + }; + }; + amixer@290bb00 { status = "okay"; @@ -2437,7 +2478,7 @@ gpio-keys { compatible = "gpio-keys"; - power { + key-power { label = "Power"; gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 0) GPIO_ACTIVE_LOW>; @@ -2448,7 +2489,7 @@ wakeup-source; }; - volume-up { + key-volume-up { label = "Volume Up"; gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 1) GPIO_ACTIVE_LOW>; @@ -2457,7 +2498,7 @@ debounce-interval = <10>; }; - volume-down { + key-volume-down { label = "Volume Down"; gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 2) GPIO_ACTIVE_LOW>; @@ -2552,6 +2593,7 @@ <&xbar_asrc_in3_port>, <&xbar_asrc_in4_port>, <&xbar_asrc_in5_port>, <&xbar_asrc_in6_port>, <&xbar_asrc_in7_port>, + <&xbar_ope1_in_port>, /* HW accelerators */ <&sfc1_out_port>, <&sfc2_out_port>, <&sfc3_out_port>, <&sfc4_out_port>, @@ -2571,6 +2613,7 @@ <&mixer_out5_port>, <&asrc_out1_port>, <&asrc_out2_port>, <&asrc_out3_port>, <&asrc_out4_port>, <&asrc_out5_port>, <&asrc_out6_port>, + <&ope1_out_port>, /* I/O */ <&i2s1_port>, <&i2s2_port>, <&i2s3_port>, <&i2s4_port>, <&i2s5_port>, <&i2s6_port>, <&dmic1_port>, <&dmic2_port>, diff --git a/dts/src/arm64/nvidia/tegra186-p3509-0000+p3636-0001.dts b/dts/src/arm64/nvidia/tegra186-p3509-0000+p3636-0001.dts index 7e9aad9ff1..3e83a4d52e 100644 --- a/dts/src/arm64/nvidia/tegra186-p3509-0000+p3636-0001.dts +++ b/dts/src/arm64/nvidia/tegra186-p3509-0000+p3636-0001.dts @@ -360,7 +360,7 @@ gpio-keys { compatible = "gpio-keys"; - power { + key-power { label = "Power"; gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 0) GPIO_ACTIVE_LOW>; @@ -371,7 +371,7 @@ wakeup-source; }; - volume-up { + key-volume-up { label = "Volume Up"; gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 1) GPIO_ACTIVE_LOW>; @@ -380,7 +380,7 @@ debounce-interval = <10>; }; - volume-down { + key-volume-down { label = "Volume Down"; gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 2) GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm64/nvidia/tegra186.dtsi b/dts/src/arm64/nvidia/tegra186.dtsi index 0e9afc3e2f..59a10fb184 100644 --- a/dts/src/arm64/nvidia/tegra186.dtsi +++ b/dts/src/arm64/nvidia/tegra186.dtsi @@ -509,6 +509,29 @@ status = "disabled"; }; + tegra_ope1: processing-engine@2908000 { + compatible = "nvidia,tegra186-ope", + "nvidia,tegra210-ope"; + reg = <0x2908000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + sound-name-prefix = "OPE1"; + status = "disabled"; + + equalizer@2908100 { + compatible = "nvidia,tegra186-peq", + "nvidia,tegra210-peq"; + reg = <0x2908100 0x100>; + }; + + dynamic-range-compressor@2908200 { + compatible = "nvidia,tegra186-mbdrc", + "nvidia,tegra210-mbdrc"; + reg = <0x2908200 0x200>; + }; + }; + tegra_amixer: amixer@290bb00 { compatible = "nvidia,tegra186-amixer", "nvidia,tegra210-amixer"; @@ -576,7 +599,7 @@ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; + status = "okay"; }; uarta: serial@3100000 { @@ -1461,6 +1484,17 @@ iommus = <&smmu TEGRA186_SID_HOST1X>; + /* Context isolation domains */ + iommu-map = < + 0 &smmu TEGRA186_SID_HOST1X_CTX0 1 + 1 &smmu TEGRA186_SID_HOST1X_CTX1 1 + 2 &smmu TEGRA186_SID_HOST1X_CTX2 1 + 3 &smmu TEGRA186_SID_HOST1X_CTX3 1 + 4 &smmu TEGRA186_SID_HOST1X_CTX4 1 + 5 &smmu TEGRA186_SID_HOST1X_CTX5 1 + 6 &smmu TEGRA186_SID_HOST1X_CTX6 1 + 7 &smmu TEGRA186_SID_HOST1X_CTX7 1>; + dpaux1: dpaux@15040000 { compatible = "nvidia,tegra186-dpaux"; reg = <0x15040000 0x10000>; @@ -1820,6 +1854,7 @@ #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x0 0x30000000 0x50000>; + no-memory-wc; cpu_bpmp_tx: sram@4e000 { reg = <0x4e000 0x1000>; diff --git a/dts/src/arm64/nvidia/tegra194-p2888.dtsi b/dts/src/arm64/nvidia/tegra194-p2888.dtsi index a7d7cfd663..b0f9393dd3 100644 --- a/dts/src/arm64/nvidia/tegra194-p2888.dtsi +++ b/dts/src/arm64/nvidia/tegra194-p2888.dtsi @@ -75,7 +75,7 @@ /* SDMMC1 (SD/MMC) */ mmc@3400000 { - cd-gpios = <&gpio TEGRA194_MAIN_GPIO(A, 0) GPIO_ACTIVE_LOW>; + cd-gpios = <&gpio TEGRA194_MAIN_GPIO(G, 7) GPIO_ACTIVE_LOW>; }; /* SDMMC4 (eMMC) */ diff --git a/dts/src/arm64/nvidia/tegra194-p2972-0000.dts b/dts/src/arm64/nvidia/tegra194-p2972-0000.dts index bce518ace6..bc1041d11f 100644 --- a/dts/src/arm64/nvidia/tegra194-p2972-0000.dts +++ b/dts/src/arm64/nvidia/tegra194-p2972-0000.dts @@ -868,6 +868,22 @@ remote-endpoint = <&asrc_in7_ep>; }; }; + + xbar_ope1_in_port: port@70 { + reg = <0x70>; + + xbar_ope1_in_ep: endpoint { + remote-endpoint = <&ope1_cif_in_ep>; + }; + }; + + port@71 { + reg = <0x71>; + + xbar_ope1_out_ep: endpoint { + remote-endpoint = <&ope1_cif_out_ep>; + }; + }; }; admaif@290f000 { @@ -1710,6 +1726,31 @@ }; }; + processing-engine@2908000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + ope1_cif_in_ep: endpoint { + remote-endpoint = <&xbar_ope1_in_ep>; + }; + }; + + ope1_out_port: port@1 { + reg = <0x1>; + + ope1_cif_out_ep: endpoint { + remote-endpoint = <&xbar_ope1_out_ep>; + }; + }; + }; + }; + amixer@290bb00 { status = "okay"; @@ -2217,7 +2258,7 @@ gpio-keys { compatible = "gpio-keys"; - force-recovery { + key-force-recovery { label = "Force Recovery"; gpios = <&gpio TEGRA194_MAIN_GPIO(G, 0) GPIO_ACTIVE_LOW>; @@ -2226,7 +2267,7 @@ debounce-interval = <10>; }; - power { + key-power { label = "Power"; gpios = <&gpio_aon TEGRA194_AON_GPIO(EE, 4) GPIO_ACTIVE_LOW>; @@ -2273,6 +2314,7 @@ <&xbar_asrc_in3_port>, <&xbar_asrc_in4_port>, <&xbar_asrc_in5_port>, <&xbar_asrc_in6_port>, <&xbar_asrc_in7_port>, + <&xbar_ope1_in_port>, /* HW accelerators */ <&sfc1_out_port>, <&sfc2_out_port>, <&sfc3_out_port>, <&sfc4_out_port>, @@ -2291,6 +2333,7 @@ <&mixer_out4_port>, <&mixer_out5_port>, <&asrc_out1_port>, <&asrc_out2_port>, <&asrc_out3_port>, <&asrc_out4_port>, <&asrc_out5_port>, <&asrc_out6_port>, + <&ope1_out_port>, /* BE I/O Ports */ <&i2s1_port>, <&i2s2_port>, <&i2s4_port>, <&i2s6_port>, <&dmic3_port>; diff --git a/dts/src/arm64/nvidia/tegra194-p3509-0000.dtsi b/dts/src/arm64/nvidia/tegra194-p3509-0000.dtsi index 7acc32dd29..273a1ef716 100644 --- a/dts/src/arm64/nvidia/tegra194-p3509-0000.dtsi +++ b/dts/src/arm64/nvidia/tegra194-p3509-0000.dtsi @@ -878,6 +878,22 @@ remote-endpoint = <&asrc_in7_ep>; }; }; + + xbar_ope1_in_port: port@70 { + reg = <0x70>; + + xbar_ope1_in_ep: endpoint { + remote-endpoint = <&ope1_cif_in_ep>; + }; + }; + + port@71 { + reg = <0x71>; + + xbar_ope1_out_ep: endpoint { + remote-endpoint = <&ope1_cif_out_ep>; + }; + }; }; admaif@290f000 { @@ -1770,6 +1786,31 @@ }; }; + processing-engine@2908000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + ope1_cif_in_ep: endpoint { + remote-endpoint = <&xbar_ope1_in_ep>; + }; + }; + + ope1_out_port: port@1 { + reg = <0x1>; + + ope1_cif_out_ep: endpoint { + remote-endpoint = <&xbar_ope1_out_ep>; + }; + }; + }; + }; + amixer@290bb00 { status = "okay"; @@ -2221,7 +2262,7 @@ gpio-keys { compatible = "gpio-keys"; - force-recovery { + key-force-recovery { label = "Force Recovery"; gpios = <&gpio TEGRA194_MAIN_GPIO(G, 0) GPIO_ACTIVE_LOW>; @@ -2230,7 +2271,7 @@ debounce-interval = <10>; }; - power { + key-power { label = "Power"; gpios = <&gpio_aon TEGRA194_AON_GPIO(EE, 4) GPIO_ACTIVE_LOW>; @@ -2323,6 +2364,7 @@ <&xbar_asrc_in3_port>, <&xbar_asrc_in4_port>, <&xbar_asrc_in5_port>, <&xbar_asrc_in6_port>, <&xbar_asrc_in7_port>, + <&xbar_ope1_in_port>, /* HW accelerators */ <&sfc1_out_port>, <&sfc2_out_port>, <&sfc3_out_port>, <&sfc4_out_port>, @@ -2342,6 +2384,7 @@ <&mixer_out5_port>, <&asrc_out1_port>, <&asrc_out2_port>, <&asrc_out3_port>, <&asrc_out4_port>, <&asrc_out5_port>, <&asrc_out6_port>, + <&ope1_out_port>, /* BE I/O Ports */ <&i2s3_port>, <&i2s5_port>, <&dmic1_port>, <&dmic2_port>, <&dmic4_port>, diff --git a/dts/src/arm64/nvidia/tegra194.dtsi b/dts/src/arm64/nvidia/tegra194.dtsi index d1f8248c00..d0ed55e5c8 100644 --- a/dts/src/arm64/nvidia/tegra194.dtsi +++ b/dts/src/arm64/nvidia/tegra194.dtsi @@ -23,7 +23,7 @@ #size-cells = <1>; ranges = <0x0 0x0 0x0 0x40000000>; - misc@100000 { + apbmisc: misc@100000 { compatible = "nvidia,tegra194-misc"; reg = <0x00100000 0xf000>, <0x0010f000 0x1000>; @@ -88,6 +88,27 @@ gpio-controller; }; + cbb-noc@2300000 { + compatible = "nvidia,tegra194-cbb-noc"; + reg = <0x02300000 0x1000>; + interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>; + nvidia,axi2apb = <&axi2apb>; + nvidia,apbmisc = <&apbmisc>; + status = "okay"; + }; + + axi2apb: axi2apb@2390000 { + compatible = "nvidia,tegra194-axi2apb"; + reg = <0x2390000 0x1000>, + <0x23a0000 0x1000>, + <0x23b0000 0x1000>, + <0x23c0000 0x1000>, + <0x23d0000 0x1000>, + <0x23e0000 0x1000>; + status = "okay"; + }; + ethernet@2490000 { compatible = "nvidia,tegra194-eqos", "nvidia,tegra186-eqos", @@ -562,6 +583,29 @@ status = "disabled"; }; + tegra_ope1: processing-engine@2908000 { + compatible = "nvidia,tegra194-ope", + "nvidia,tegra210-ope"; + reg = <0x2908000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + sound-name-prefix = "OPE1"; + status = "disabled"; + + equalizer@2908100 { + compatible = "nvidia,tegra194-peq", + "nvidia,tegra210-peq"; + reg = <0x2908100 0x100>; + }; + + dynamic-range-compressor@2908200 { + compatible = "nvidia,tegra194-mbdrc", + "nvidia,tegra210-mbdrc"; + reg = <0x2908200 0x200>; + }; + }; + tegra_amixer: amixer@290bb00 { compatible = "nvidia,tegra194-amixer", "nvidia,tegra210-amixer"; @@ -675,6 +719,22 @@ }; }; + timer@3010000 { + compatible = "nvidia,tegra186-timer"; + reg = <0x03010000 0x000e0000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + status = "okay"; + }; + uarta: serial@3100000 { compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart"; reg = <0x03100000 0x40>; @@ -1460,6 +1520,26 @@ #phy-cells = <0>; }; + sce-noc@b600000 { + compatible = "nvidia,tegra194-sce-noc"; + reg = <0xb600000 0x1000>; + interrupts = <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + nvidia,axi2apb = <&axi2apb>; + nvidia,apbmisc = <&apbmisc>; + status = "okay"; + }; + + rce-noc@be00000 { + compatible = "nvidia,tegra194-rce-noc"; + reg = <0xbe00000 0x1000>; + interrupts = <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; + nvidia,axi2apb = <&axi2apb>; + nvidia,apbmisc = <&apbmisc>; + status = "okay"; + }; + hsp_aon: hsp@c150000 { compatible = "nvidia,tegra194-hsp"; reg = <0x0c150000 0x90000>; @@ -1594,6 +1674,25 @@ }; + aon-noc@c600000 { + compatible = "nvidia,tegra194-aon-noc"; + reg = <0xc600000 0x1000>; + interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>; + nvidia,apbmisc = <&apbmisc>; + status = "okay"; + }; + + bpmp-noc@d600000 { + compatible = "nvidia,tegra194-bpmp-noc"; + reg = <0xd600000 0x1000>; + interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + nvidia,axi2apb = <&axi2apb>; + nvidia,apbmisc = <&apbmisc>; + status = "okay"; + }; + iommu@10000000 { compatible = "nvidia,tegra194-smmu", "nvidia,smmu-500"; reg = <0x10000000 0x800000>; @@ -1769,6 +1868,17 @@ interconnect-names = "dma-mem"; iommus = <&smmu TEGRA194_SID_HOST1X>; + /* Context isolation domains */ + iommu-map = < + 0 &smmu TEGRA194_SID_HOST1X_CTX0 1 + 1 &smmu TEGRA194_SID_HOST1X_CTX1 1 + 2 &smmu TEGRA194_SID_HOST1X_CTX2 1 + 3 &smmu TEGRA194_SID_HOST1X_CTX3 1 + 4 &smmu TEGRA194_SID_HOST1X_CTX4 1 + 5 &smmu TEGRA194_SID_HOST1X_CTX5 1 + 6 &smmu TEGRA194_SID_HOST1X_CTX6 1 + 7 &smmu TEGRA194_SID_HOST1X_CTX7 1>; + nvdec@15140000 { compatible = "nvidia,tegra194-nvdec"; reg = <0x15140000 0x00040000>; @@ -2684,6 +2794,7 @@ #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x0 0x40000000 0x50000>; + no-memory-wc; cpu_bpmp_tx: sram@4e000 { reg = <0x4e000 0x1000>; diff --git a/dts/src/arm64/nvidia/tegra210-p2371-2180.dts b/dts/src/arm64/nvidia/tegra210-p2371-2180.dts index 328fbfec4e..1e26ca91a9 100644 --- a/dts/src/arm64/nvidia/tegra210-p2371-2180.dts +++ b/dts/src/arm64/nvidia/tegra210-p2371-2180.dts @@ -682,6 +682,56 @@ }; }; + processing-engine@702d8000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + ope1_cif_in_ep: endpoint { + remote-endpoint = <&xbar_ope1_in_ep>; + }; + }; + + ope1_out_port: port@1 { + reg = <0x1>; + + ope1_cif_out_ep: endpoint { + remote-endpoint = <&xbar_ope1_out_ep>; + }; + }; + }; + }; + + processing-engine@702d8400 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + ope2_cif_in_ep: endpoint { + remote-endpoint = <&xbar_ope2_in_ep>; + }; + }; + + ope2_out_port: port@1 { + reg = <0x1>; + + ope2_cif_out_ep: endpoint { + remote-endpoint = <&xbar_ope2_out_ep>; + }; + }; + }; + }; + amixer@702dbb00 { status = "okay"; @@ -1251,6 +1301,38 @@ remote-endpoint = <&mixer_out5_ep>; }; }; + + xbar_ope1_in_port: port@41 { + reg = <0x41>; + + xbar_ope1_in_ep: endpoint { + remote-endpoint = <&ope1_cif_in_ep>; + }; + }; + + port@42 { + reg = <0x42>; + + xbar_ope1_out_ep: endpoint { + remote-endpoint = <&ope1_cif_out_ep>; + }; + }; + + xbar_ope2_in_port: port@43 { + reg = <0x43>; + + xbar_ope2_in_ep: endpoint { + remote-endpoint = <&ope2_cif_in_ep>; + }; + }; + + port@44 { + reg = <0x44>; + + xbar_ope2_out_ep: endpoint { + remote-endpoint = <&ope2_cif_out_ep>; + }; + }; }; }; }; @@ -1281,6 +1363,7 @@ <&xbar_mixer_in5_port>, <&xbar_mixer_in6_port>, <&xbar_mixer_in7_port>, <&xbar_mixer_in8_port>, <&xbar_mixer_in9_port>, <&xbar_mixer_in10_port>, + <&xbar_ope1_in_port>, <&xbar_ope2_in_port>, /* HW accelerators */ <&sfc1_out_port>, <&sfc2_out_port>, <&sfc3_out_port>, <&sfc4_out_port>, @@ -1293,6 +1376,7 @@ <&mixer_out1_port>, <&mixer_out2_port>, <&mixer_out3_port>, <&mixer_out4_port>, <&mixer_out5_port>, + <&ope1_out_port>, <&ope2_out_port>, /* I/O DAP Ports */ <&i2s1_port>, <&i2s2_port>, <&i2s3_port>, <&i2s4_port>, <&i2s5_port>, <&dmic1_port>, <&dmic2_port>, <&dmic3_port>; diff --git a/dts/src/arm64/nvidia/tegra210-p2597.dtsi b/dts/src/arm64/nvidia/tegra210-p2597.dtsi index 4b43b89a96..a44c56c1e5 100644 --- a/dts/src/arm64/nvidia/tegra210-p2597.dtsi +++ b/dts/src/arm64/nvidia/tegra210-p2597.dtsi @@ -1530,20 +1530,20 @@ compatible = "gpio-keys"; label = "gpio-keys"; - power { + key-power { label = "Power"; gpios = <&gpio TEGRA_GPIO(X, 5) GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; wakeup-source; }; - volume_down { + key-volume-down { label = "Volume Down"; gpios = <&gpio TEGRA_GPIO(Y, 0) GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; }; - volume_up { + key-volume-up { label = "Volume Up"; gpios = <&gpio TEGRA_GPIO(X, 6) GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; diff --git a/dts/src/arm64/nvidia/tegra210-p2894.dtsi b/dts/src/arm64/nvidia/tegra210-p2894.dtsi index 10347b6e6e..8e657b1056 100644 --- a/dts/src/arm64/nvidia/tegra210-p2894.dtsi +++ b/dts/src/arm64/nvidia/tegra210-p2894.dtsi @@ -1596,7 +1596,7 @@ compatible = "gpio-keys"; status = "okay"; - power { + key-power { debounce-interval = <30>; gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>; label = "Power"; diff --git a/dts/src/arm64/nvidia/tegra210-p3450-0000.dts b/dts/src/arm64/nvidia/tegra210-p3450-0000.dts index 746bd52ea3..37678c337a 100644 --- a/dts/src/arm64/nvidia/tegra210-p3450-0000.dts +++ b/dts/src/arm64/nvidia/tegra210-p3450-0000.dts @@ -1074,6 +1074,56 @@ }; }; + processing-engine@702d8000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + ope1_cif_in_ep: endpoint { + remote-endpoint = <&xbar_ope1_in_ep>; + }; + }; + + ope1_out_port: port@1 { + reg = <0x1>; + + ope1_cif_out_ep: endpoint { + remote-endpoint = <&xbar_ope1_out_ep>; + }; + }; + }; + }; + + processing-engine@702d8400 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + ope2_cif_in_ep: endpoint { + remote-endpoint = <&xbar_ope2_in_ep>; + }; + }; + + ope2_out_port: port@1 { + reg = <0x1>; + + ope2_cif_out_ep: endpoint { + remote-endpoint = <&xbar_ope2_out_ep>; + }; + }; + }; + }; + amixer@702dbb00 { status = "okay"; @@ -1611,6 +1661,38 @@ remote-endpoint = <&mixer_out5_ep>; }; }; + + xbar_ope1_in_port: port@41 { + reg = <0x41>; + + xbar_ope1_in_ep: endpoint { + remote-endpoint = <&ope1_cif_in_ep>; + }; + }; + + port@42 { + reg = <0x42>; + + xbar_ope1_out_ep: endpoint { + remote-endpoint = <&ope1_cif_out_ep>; + }; + }; + + xbar_ope2_in_port: port@43 { + reg = <0x43>; + + xbar_ope2_in_ep: endpoint { + remote-endpoint = <&ope2_cif_in_ep>; + }; + }; + + port@44 { + reg = <0x44>; + + xbar_ope2_out_ep: endpoint { + remote-endpoint = <&ope2_cif_out_ep>; + }; + }; }; }; }; @@ -1720,7 +1802,7 @@ gpio-keys { compatible = "gpio-keys"; - power { + key-power { label = "Power"; gpios = <&gpio TEGRA_GPIO(X, 5) GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; @@ -1730,7 +1812,7 @@ wakeup-source; }; - force-recovery { + key-force-recovery { label = "Force Recovery"; gpios = <&gpio TEGRA_GPIO(X, 6) GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; @@ -1884,6 +1966,7 @@ <&xbar_mixer_in5_port>, <&xbar_mixer_in6_port>, <&xbar_mixer_in7_port>, <&xbar_mixer_in8_port>, <&xbar_mixer_in9_port>, <&xbar_mixer_in10_port>, + <&xbar_ope1_in_port>, <&xbar_ope2_in_port>, /* HW accelerators */ <&sfc1_out_port>, <&sfc2_out_port>, <&sfc3_out_port>, <&sfc4_out_port>, @@ -1896,6 +1979,7 @@ <&mixer_out1_port>, <&mixer_out2_port>, <&mixer_out3_port>, <&mixer_out4_port>, <&mixer_out5_port>, + <&ope1_out_port>, <&ope2_out_port>, /* I/O DAP Ports */ <&i2s3_port>, <&i2s4_port>, <&dmic1_port>, <&dmic2_port>; diff --git a/dts/src/arm64/nvidia/tegra210-smaug.dts b/dts/src/arm64/nvidia/tegra210-smaug.dts index a263d51882..5f3a1c56b2 100644 --- a/dts/src/arm64/nvidia/tegra210-smaug.dts +++ b/dts/src/arm64/nvidia/tegra210-smaug.dts @@ -1756,7 +1756,7 @@ gpio-keys { compatible = "gpio-keys"; - power { + key-power { label = "Power"; gpios = <&gpio TEGRA_GPIO(X, 5) GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; @@ -1764,7 +1764,7 @@ wakeup-source; }; - lid { + switch-lid { label = "Lid"; gpios = <&gpio TEGRA_GPIO(B, 4) GPIO_ACTIVE_LOW>; linux,input-type = <EV_SW>; @@ -1772,7 +1772,7 @@ wakeup-source; }; - tablet_mode { + switch-tablet-mode { label = "Tablet Mode"; gpios = <&gpio TEGRA_GPIO(Z, 2) GPIO_ACTIVE_HIGH>; linux,input-type = <EV_SW>; @@ -1780,13 +1780,13 @@ wakeup-source; }; - volume_down { + key-volume-down { label = "Volume Down"; gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; }; - volume_up { + key-volume-up { label = "Volume Up"; gpios = <&gpio TEGRA_GPIO(M, 4) GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; diff --git a/dts/src/arm64/nvidia/tegra210.dtsi b/dts/src/arm64/nvidia/tegra210.dtsi index 4f0e51f1a3..724e874506 100644 --- a/dts/src/arm64/nvidia/tegra210.dtsi +++ b/dts/src/arm64/nvidia/tegra210.dtsi @@ -1055,7 +1055,7 @@ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; resets = <&tegra_car 142>; reset-names = "padctl"; - nvidia,pmc = <&tegra_pmc>; + nvidia,pmc = <&tegra_pmc>; status = "disabled"; @@ -1723,6 +1723,46 @@ status = "disabled"; }; + tegra_ope1: processing-engine@702d8000 { + compatible = "nvidia,tegra210-ope"; + reg = <0x702d8000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + sound-name-prefix = "OPE1"; + status = "disabled"; + + equalizer@702d8100 { + compatible = "nvidia,tegra210-peq"; + reg = <0x702d8100 0x100>; + }; + + dynamic-range-compressor@702d8200 { + compatible = "nvidia,tegra210-mbdrc"; + reg = <0x702d8200 0x200>; + }; + }; + + tegra_ope2: processing-engine@702d8400 { + compatible = "nvidia,tegra210-ope"; + reg = <0x702d8400 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + sound-name-prefix = "OPE2"; + status = "disabled"; + + equalizer@702d8500 { + compatible = "nvidia,tegra210-peq"; + reg = <0x702d8500 0x100>; + }; + + dynamic-range-compressor@702d8600 { + compatible = "nvidia,tegra210-mbdrc"; + reg = <0x702d8600 0x200>; + }; + }; + tegra_amixer: amixer@702dbb00 { compatible = "nvidia,tegra210-amixer"; reg = <0x702dbb00 0x800>; diff --git a/dts/src/arm64/nvidia/tegra234-p3737-0000+p3701-0000.dts b/dts/src/arm64/nvidia/tegra234-p3737-0000+p3701-0000.dts index eaf1994abb..02a10bb385 100644 --- a/dts/src/arm64/nvidia/tegra234-p3737-0000+p3701-0000.dts +++ b/dts/src/arm64/nvidia/tegra234-p3737-0000+p3701-0000.dts @@ -867,6 +867,22 @@ remote-endpoint = <&asrc_in7_ep>; }; }; + + xbar_ope1_in_port: port@70 { + reg = <0x70>; + + xbar_ope1_in_ep: endpoint { + remote-endpoint = <&ope1_cif_in_ep>; + }; + }; + + port@71 { + reg = <0x71>; + + xbar_ope1_out_ep: endpoint { + remote-endpoint = <&ope1_cif_out_ep>; + }; + }; }; i2s@2901000 { @@ -1490,6 +1506,31 @@ }; }; + processing-engine@2908000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + ope1_cif_in_ep: endpoint { + remote-endpoint = <&xbar_ope1_in_ep>; + }; + }; + + ope1_out_port: port@1 { + reg = <0x1>; + + ope1_cif_out_ep: endpoint { + remote-endpoint = <&xbar_ope1_out_ep>; + }; + }; + }; + }; + mvc@290a000 { status = "okay"; @@ -1980,14 +2021,14 @@ compatible = "gpio-keys"; status = "okay"; - force-recovery { + key-force-recovery { label = "Force Recovery"; gpios = <&gpio TEGRA234_MAIN_GPIO(G, 0) GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; linux,code = <BTN_1>; }; - power-key { + key-power { label = "Power"; gpios = <&gpio_aon TEGRA234_AON_GPIO(EE, 4) GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; @@ -1996,7 +2037,7 @@ wakeup-source; }; - suspend { + key-suspend { label = "Suspend"; gpios = <&gpio TEGRA234_MAIN_GPIO(G, 2) GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; @@ -2044,6 +2085,7 @@ <&xbar_asrc_in3_port>, <&xbar_asrc_in4_port>, <&xbar_asrc_in5_port>, <&xbar_asrc_in6_port>, <&xbar_asrc_in7_port>, + <&xbar_ope1_in_port>, /* HW accelerators */ <&sfc1_out_port>, <&sfc2_out_port>, <&sfc3_out_port>, <&sfc4_out_port>, @@ -2062,6 +2104,7 @@ <&mix_out4_port>, <&mix_out5_port>, <&asrc_out1_port>, <&asrc_out2_port>, <&asrc_out3_port>, <&asrc_out4_port>, <&asrc_out5_port>, <&asrc_out6_port>, + <&ope1_out_port>, /* BE I/O Ports */ <&i2s1_port>, <&i2s2_port>, <&i2s4_port>, <&i2s6_port>, <&dmic3_port>; diff --git a/dts/src/arm64/nvidia/tegra234.dtsi b/dts/src/arm64/nvidia/tegra234.dtsi index cb3af539e4..81a0f59968 100644 --- a/dts/src/arm64/nvidia/tegra234.dtsi +++ b/dts/src/arm64/nvidia/tegra234.dtsi @@ -21,6 +21,49 @@ ranges = <0x0 0x0 0x0 0x40000000>; + gpcdma: dma-controller@2600000 { + compatible = "nvidia,tegra234-gpcdma", + "nvidia,tegra194-gpcdma", + "nvidia,tegra186-gpcdma"; + reg = <0x2600000 0x210000>; + resets = <&bpmp TEGRA234_RESET_GPCDMA>; + reset-names = "gpcdma"; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + iommus = <&smmu_niso0 TEGRA234_SID_GPCDMA>; + dma-coherent; + }; + aconnect@2900000 { compatible = "nvidia,tegra234-aconnect", "nvidia,tegra210-aconnect"; @@ -304,6 +347,29 @@ status = "disabled"; }; + tegra_ope1: processing-engine@2908000 { + compatible = "nvidia,tegra234-ope", + "nvidia,tegra210-ope"; + reg = <0x2908000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + sound-name-prefix = "OPE1"; + status = "disabled"; + + equalizer@2908100 { + compatible = "nvidia,tegra234-peq", + "nvidia,tegra210-peq"; + reg = <0x2908100 0x100>; + }; + + dynamic-range-compressor@2908200 { + compatible = "nvidia,tegra234-mbdrc", + "nvidia,tegra210-mbdrc"; + reg = <0x2908200 0x200>; + }; + }; + tegra_mvc1: mvc@290a000 { compatible = "nvidia,tegra234-mvc", "nvidia,tegra210-mvc"; @@ -454,6 +520,74 @@ status = "okay"; }; + timer@2080000 { + compatible = "nvidia,tegra234-timer"; + reg = <0x02080000 0x00121000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + status = "okay"; + }; + + host1x@13e00000 { + compatible = "nvidia,tegra234-host1x"; + reg = <0x13e00000 0x10000>, + <0x13e10000 0x10000>, + <0x13e40000 0x10000>; + reg-names = "common", "hypervisor", "vm"; + interrupts = <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "syncpt0", "syncpt1", "syncpt2", "syncpt3", "syncpt4", + "syncpt5", "syncpt6", "syncpt7", "host1x"; + clocks = <&bpmp TEGRA234_CLK_HOST1X>; + clock-names = "host1x"; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0x15000000 0x15000000 0x01000000>; + interconnects = <&mc TEGRA234_MEMORY_CLIENT_HOST1XDMAR &emc>; + interconnect-names = "dma-mem"; + iommus = <&smmu_niso1 TEGRA234_SID_HOST1X>; + + vic@15340000 { + compatible = "nvidia,tegra234-vic"; + reg = <0x15340000 0x00040000>; + interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA234_CLK_VIC>; + clock-names = "vic"; + resets = <&bpmp TEGRA234_RESET_VIC>; + reset-names = "vic"; + + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_VIC>; + interconnects = <&mc TEGRA234_MEMORY_CLIENT_VICSRD &emc>, + <&mc TEGRA234_MEMORY_CLIENT_VICSWR &emc>; + interconnect-names = "dma-mem", "write"; + iommus = <&smmu_niso1 TEGRA234_SID_VIC>; + dma-coherent; + }; + }; + gpio: gpio@2200000 { compatible = "nvidia,tegra234-gpio"; reg-names = "security", "gpio"; @@ -933,6 +1067,20 @@ status = "okay"; }; + sce-fabric@b600000 { + compatible = "nvidia,tegra234-sce-fabric"; + reg = <0xb600000 0x40000>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + status = "okay"; + }; + + rce-fabric@be00000 { + compatible = "nvidia,tegra234-rce-fabric"; + reg = <0xbe00000 0x40000>; + interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; + status = "okay"; + }; + hsp_aon: hsp@c150000 { compatible = "nvidia,tegra234-hsp", "nvidia,tegra194-hsp"; reg = <0x0c150000 0x90000>; @@ -1017,6 +1165,27 @@ interrupt-controller; }; + aon-fabric@c600000 { + compatible = "nvidia,tegra234-aon-fabric"; + reg = <0xc600000 0x40000>; + interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>; + status = "okay"; + }; + + bpmp-fabric@d600000 { + compatible = "nvidia,tegra234-bpmp-fabric"; + reg = <0xd600000 0x40000>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + status = "okay"; + }; + + dce-fabric@de00000 { + compatible = "nvidia,tegra234-sce-fabric"; + reg = <0xde00000 0x40000>; + interrupts = <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>; + status = "okay"; + }; + gic: interrupt-controller@f400000 { compatible = "arm,gic-v3"; reg = <0x0f400000 0x010000>, /* GICD */ @@ -1310,6 +1479,13 @@ nvidia,memory-controller = <&mc>; status = "okay"; }; + + cbb-fabric@13a00000 { + compatible = "nvidia,tegra234-cbb-fabric"; + reg = <0x13a00000 0x400000>; + interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>; + status = "okay"; + }; }; ccplex@e000000 { @@ -1325,6 +1501,7 @@ #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x0 0x40000000 0x80000>; + no-memory-wc; cpu_bpmp_tx: sram@70000 { reg = <0x70000 0x1000>; diff --git a/dts/src/arm64/qcom/apq8016-sbc.dts b/dts/src/arm64/qcom/apq8016-sbc.dts index 7c1eab605c..1b613098fb 100644 --- a/dts/src/arm64/qcom/apq8016-sbc.dts +++ b/dts/src/arm64/qcom/apq8016-sbc.dts @@ -8,6 +8,7 @@ #include "msm8916-pm8916.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/pinctrl/qcom,pmic-mpp.h> #include <dt-bindings/sound/apq8016-lpass.h> @@ -20,11 +21,11 @@ serial0 = &blsp1_uart2; serial1 = &blsp1_uart1; usid0 = &pm8916_0; - i2c0 = &blsp_i2c2; - i2c1 = &blsp_i2c6; - i2c3 = &blsp_i2c4; - spi0 = &blsp_spi5; - spi1 = &blsp_spi3; + i2c0 = &blsp_i2c2; + i2c1 = &blsp_i2c6; + i2c3 = &blsp_i2c4; + spi0 = &blsp_spi5; + spi1 = &blsp_spi3; }; chosen { @@ -92,14 +93,12 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; pinctrl-names = "default"; pinctrl-0 = <&msm_key_volp_n_default>; - button@0 { + button { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; @@ -116,6 +115,8 @@ led@1 { label = "apq8016-sbc:green:user1"; + function = LED_FUNCTION_HEARTBEAT; + color = <LED_COLOR_ID_GREEN>; gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; default-state = "off"; @@ -123,6 +124,8 @@ led@2 { label = "apq8016-sbc:green:user2"; + function = LED_FUNCTION_DISK_ACTIVITY; + color = <LED_COLOR_ID_GREEN>; gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>; linux,default-trigger = "mmc0"; default-state = "off"; @@ -130,6 +133,8 @@ led@3 { label = "apq8016-sbc:green:user3"; + function = LED_FUNCTION_DISK_ACTIVITY; + color = <LED_COLOR_ID_GREEN>; gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>; linux,default-trigger = "mmc1"; default-state = "off"; @@ -137,6 +142,7 @@ led@4 { label = "apq8016-sbc:green:user4"; + color = <LED_COLOR_ID_GREEN>; gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>; linux,default-trigger = "none"; panic-indicator; @@ -145,6 +151,8 @@ led@5 { label = "apq8016-sbc:yellow:wlan"; + function = LED_FUNCTION_WLAN; + color = <LED_COLOR_ID_YELLOW>; gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy0tx"; default-state = "off"; @@ -152,6 +160,8 @@ led@6 { label = "apq8016-sbc:blue:bt"; + function = LED_FUNCTION_BLUETOOTH; + color = <LED_COLOR_ID_BLUE>; gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>; linux,default-trigger = "bluetooth-power"; default-state = "off"; @@ -773,7 +783,7 @@ "USB_HUB_RESET_N_PM", "USB_SW_SEL_PM"; - usb_hub_reset_pm: usb-hub-reset-pm { + usb_hub_reset_pm: usb-hub-reset-pm-state { pins = "gpio3"; function = PMIC_GPIO_FUNC_NORMAL; @@ -781,14 +791,14 @@ output-high; }; - usb_hub_reset_pm_device: usb-hub-reset-pm-device { + usb_hub_reset_pm_device: usb-hub-reset-pm-device-state { pins = "gpio3"; function = PMIC_GPIO_FUNC_NORMAL; output-low; }; - usb_sw_sel_pm: usb-sw-sel-pm { + usb_sw_sel_pm: usb-sw-sel-pm-state { pins = "gpio4"; function = PMIC_GPIO_FUNC_NORMAL; @@ -797,7 +807,7 @@ output-high; }; - usb_sw_sel_pm_device: usb-sw-sel-pm-device { + usb_sw_sel_pm_device: usb-sw-sel-pm-device-state { pins = "gpio4"; function = PMIC_GPIO_FUNC_NORMAL; @@ -806,7 +816,7 @@ output-low; }; - pm8916_gpios_leds: pm8916-gpios-leds { + pm8916_gpios_leds: pm8916-gpios-leds-state { pins = "gpio1", "gpio2"; function = PMIC_GPIO_FUNC_NORMAL; diff --git a/dts/src/arm64/qcom/apq8096-db820c.dts b/dts/src/arm64/qcom/apq8096-db820c.dts index 49afbb1a06..c1cb1ba517 100644 --- a/dts/src/arm64/qcom/apq8096-db820c.dts +++ b/dts/src/arm64/qcom/apq8096-db820c.dts @@ -10,6 +10,7 @@ #include "pmi8994.dtsi" #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/sound/qcom,q6afe.h> #include <dt-bindings/sound/qcom,q6asm.h> @@ -49,11 +50,11 @@ serial0 = &blsp2_uart2; serial1 = &blsp2_uart3; serial2 = &blsp1_uart2; - i2c0 = &blsp1_i2c3; - i2c1 = &blsp2_i2c1; - i2c2 = &blsp2_i2c1; - spi0 = &blsp1_spi1; - spi1 = &blsp2_spi6; + i2c0 = &blsp1_i2c3; + i2c1 = &blsp2_i2c1; + i2c2 = &blsp2_i2c1; + spi0 = &blsp1_spi1; + spi1 = &blsp2_spi6; }; chosen { @@ -82,16 +83,14 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; pinctrl-names = "default"; pinctrl-0 = <&volume_up_gpio>; - button@0 { + button { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>; @@ -555,15 +554,16 @@ pinctrl-names = "default"; pinctrl-0 = <&ls_exp_gpio_f &bt_en_gpios>; - ls_exp_gpio_f: pm8994_gpio5 { + ls_exp_gpio_f: pm8994-gpio5-state { pinconf { pins = "gpio5"; + function = PMIC_GPIO_FUNC_NORMAL; output-low; power-source = <2>; // PM8994_GPIO_S4, 1.8V }; }; - bt_en_gpios: bt_en_gpios { + bt_en_gpios: bt-en-pios-state { pinconf { pins = "gpio19"; function = PMIC_GPIO_FUNC_NORMAL; @@ -574,7 +574,7 @@ }; }; - wlan_en_gpios: wlan_en_gpios { + wlan_en_gpios: wlan-en-gpios-state { pinconf { pins = "gpio8"; function = PMIC_GPIO_FUNC_NORMAL; @@ -585,7 +585,7 @@ }; }; - audio_mclk: clk_div1 { + audio_mclk: clk-div1-state { pinconf { pins = "gpio15"; function = "func1"; @@ -593,7 +593,7 @@ }; }; - volume_up_gpio: pm8996_gpio2 { + volume_up_gpio: pm8996-gpio2-state { pinconf { pins = "gpio2"; function = "normal"; @@ -605,7 +605,7 @@ }; }; - divclk4_pin_a: divclk4 { + divclk4_pin_a: divclk4-state { pinconf { pins = "gpio18"; function = PMIC_GPIO_FUNC_FUNC2; @@ -615,7 +615,7 @@ }; }; - usb3_vbus_det_gpio: pm8996_gpio22 { + usb3_vbus_det_gpio: pm8996-gpio22-state { pinconf { pins = "gpio22"; function = PMIC_GPIO_FUNC_NORMAL; @@ -671,7 +671,7 @@ "NC", "NC"; - usb2_vbus_det_gpio: pmi8996_gpio6 { + usb2_vbus_det_gpio: pmi8996-gpio6-state { pinconf { pins = "gpio6"; function = PMIC_GPIO_FUNC_NORMAL; @@ -683,6 +683,61 @@ }; }; +&pmi8994_lpg { + qcom,power-source = <1>; + + pinctrl-names = "default"; + pinctrl-0 = <&pmi8994_mpp2_userled4>; + + qcom,dtest = <0 0>, + <0 0>, + <0 0>, + <4 1>; + + status = "okay"; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_HEARTBEAT; + function-enumerator = <1>; + + linux,default-trigger = "heartbeat"; + default-state = "on"; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_HEARTBEAT; + function-enumerator = <0>; + }; + + led@3 { + reg = <3>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_HEARTBEAT; + function-enumerator = <2>; + }; + + led@4 { + reg = <4>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_HEARTBEAT; + function-enumerator = <3>; + }; +}; + +&pmi8994_mpps { + pmi8994_mpp2_userled4: mpp2-userled4-state { + pins = "mpp2"; + function = "sink"; + + output-low; + qcom,dtest = <4>; + }; +}; + &pmi8994_spmi_regulators { vdd_s2-supply = <&vph_pwr>; @@ -957,7 +1012,7 @@ &sound { compatible = "qcom,apq8096-sndcard"; model = "DB820c"; - audio-routing = "RX_BIAS", "MCLK", + audio-routing = "RX_BIAS", "MCLK", "MM_DL1", "MultiMedia1 Playback", "MM_DL2", "MultiMedia2 Playback", "MultiMedia3 Capture", "MM_UL3"; diff --git a/dts/src/arm64/qcom/ipq6018-cp01-c1.dts b/dts/src/arm64/qcom/ipq6018-cp01-c1.dts index 821cb7c0c1..1ba2eca33c 100644 --- a/dts/src/arm64/qcom/ipq6018-cp01-c1.dts +++ b/dts/src/arm64/qcom/ipq6018-cp01-c1.dts @@ -29,13 +29,13 @@ status = "okay"; }; -&i2c_1 { +&blsp1_i2c3 { pinctrl-0 = <&i2c_1_pins>; pinctrl-names = "default"; status = "okay"; }; -&spi_0 { +&blsp1_spi1 { cs-select = <0>; status = "okay"; @@ -43,7 +43,7 @@ #address-cells = <1>; #size-cells = <1>; reg = <0>; - compatible = "n25q128a11"; + compatible = "micron,n25q128a11", "jedec,spi-nor"; spi-max-frequency = <50000000>; }; }; diff --git a/dts/src/arm64/qcom/ipq6018.dtsi b/dts/src/arm64/qcom/ipq6018.dtsi index c89499e366..aaad7d9059 100644 --- a/dts/src/arm64/qcom/ipq6018.dtsi +++ b/dts/src/arm64/qcom/ipq6018.dtsi @@ -87,7 +87,7 @@ }; }; - cpu_opp_table: cpu_opp_table { + cpu_opp_table: opp-table-cpu { compatible = "operating-points-v2"; opp-shared; @@ -125,7 +125,7 @@ firmware { scm { - compatible = "qcom,scm"; + compatible = "qcom,scm-ipq6018", "qcom,scm"; }; }; @@ -282,7 +282,7 @@ status = "disabled"; }; - spi_0: spi@78b5000 { + blsp1_spi1: spi@78b5000 { compatible = "qcom,spi-qup-v2.2.1"; #address-cells = <1>; #size-cells = <0>; @@ -297,7 +297,7 @@ status = "disabled"; }; - spi_1: spi@78b6000 { + blsp1_spi2: spi@78b6000 { compatible = "qcom,spi-qup-v2.2.1"; #address-cells = <1>; #size-cells = <0>; @@ -312,7 +312,7 @@ status = "disabled"; }; - i2c_0: i2c@78b6000 { + blsp1_i2c2: i2c@78b6000 { compatible = "qcom,i2c-qup-v2.2.1"; #address-cells = <1>; #size-cells = <0>; @@ -321,13 +321,13 @@ clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; - clock-frequency = <400000>; + clock-frequency = <400000>; dmas = <&blsp_dma 14>, <&blsp_dma 15>; dma-names = "tx", "rx"; status = "disabled"; }; - i2c_1: i2c@78b7000 { /* BLSP1 QUP2 */ + blsp1_i2c3: i2c@78b7000 { compatible = "qcom,i2c-qup-v2.2.1"; #address-cells = <1>; #size-cells = <0>; @@ -336,7 +336,7 @@ clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; - clock-frequency = <400000>; + clock-frequency = <400000>; dmas = <&blsp_dma 16>, <&blsp_dma 17>; dma-names = "tx", "rx"; status = "disabled"; @@ -525,9 +525,9 @@ }; timer@b120000 { - #address-cells = <2>; - #size-cells = <2>; - ranges; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0x10000000>; compatible = "arm,armv7-timer-mem"; reg = <0x0 0x0b120000 0x0 0x1000>; @@ -535,49 +535,49 @@ frame-number = <0>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x0b121000 0x0 0x1000>, - <0x0 0x0b122000 0x0 0x1000>; + reg = <0x0b121000 0x1000>, + <0x0b122000 0x1000>; }; frame@b123000 { frame-number = <1>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0xb123000 0x0 0x1000>; + reg = <0x0b123000 0x1000>; status = "disabled"; }; frame@b124000 { frame-number = <2>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x0b124000 0x0 0x1000>; + reg = <0x0b124000 0x1000>; status = "disabled"; }; frame@b125000 { frame-number = <3>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x0b125000 0x0 0x1000>; + reg = <0x0b125000 0x1000>; status = "disabled"; }; frame@b126000 { frame-number = <4>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x0b126000 0x0 0x1000>; + reg = <0x0b126000 0x1000>; status = "disabled"; }; frame@b127000 { frame-number = <5>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x0b127000 0x0 0x1000>; + reg = <0x0b127000 0x1000>; status = "disabled"; }; frame@b128000 { frame-number = <6>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x0b128000 0x0 0x1000>; + reg = <0x0b128000 0x1000>; status = "disabled"; }; }; @@ -621,6 +621,7 @@ glink-edge { interrupts = <GIC_SPI 321 IRQ_TYPE_EDGE_RISING>; + label = "rtr"; qcom,remote-pid = <1>; mboxes = <&apcs_glb 8>; @@ -710,7 +711,7 @@ <0x0 0x00078800 0x0 0x1F8>, /* PCS */ <0x0 0x00078600 0x0 0x044>; /* PCS misc */ #phy-cells = <0>; - #clock-cells = <1>; + #clock-cells = <0>; clocks = <&gcc GCC_USB0_PIPE_CLK>; clock-names = "pipe0"; clock-output-names = "gcc_usb0_pipe_clk_src"; diff --git a/dts/src/arm64/qcom/ipq8074-hk01.dts b/dts/src/arm64/qcom/ipq8074-hk01.dts index de20cb98ac..81dc3a0bcd 100644 --- a/dts/src/arm64/qcom/ipq8074-hk01.dts +++ b/dts/src/arm64/qcom/ipq8074-hk01.dts @@ -5,11 +5,8 @@ #include "ipq8074.dtsi" / { - #address-cells = <0x2>; - #size-cells = <0x2>; model = "Qualcomm Technologies, Inc. IPQ8074-HK01"; compatible = "qcom,ipq8074-hk01", "qcom,ipq8074"; - interrupt-parent = <&intc>; aliases { serial0 = &blsp1_uart5; diff --git a/dts/src/arm64/qcom/ipq8074-hk10.dtsi b/dts/src/arm64/qcom/ipq8074-hk10.dtsi index ce86d9b10d..40415d988e 100644 --- a/dts/src/arm64/qcom/ipq8074-hk10.dtsi +++ b/dts/src/arm64/qcom/ipq8074-hk10.dtsi @@ -7,11 +7,6 @@ #include "ipq8074.dtsi" / { - #address-cells = <0x2>; - #size-cells = <0x2>; - - interrupt-parent = <&intc>; - aliases { serial0 = &blsp1_uart5; }; diff --git a/dts/src/arm64/qcom/ipq8074.dtsi b/dts/src/arm64/qcom/ipq8074.dtsi index 4c38b15c6f..d53675fc15 100644 --- a/dts/src/arm64/qcom/ipq8074.dtsi +++ b/dts/src/arm64/qcom/ipq8074.dtsi @@ -7,8 +7,12 @@ #include <dt-bindings/clock/qcom,gcc-ipq8074.h> / { + #address-cells = <2>; + #size-cells = <2>; + model = "Qualcomm Technologies, Inc. IPQ8074"; compatible = "qcom,ipq8074"; + interrupt-parent = <&intc>; clocks { sleep_clk: sleep_clk { @@ -119,7 +123,7 @@ <&xo>; clock-names = "aux", "cfg_ahb", "ref"; - resets = <&gcc GCC_USB1_PHY_BCR>, + resets = <&gcc GCC_USB1_PHY_BCR>, <&gcc GCC_USB3PHY_1_PHY_BCR>; reset-names = "phy","common"; status = "disabled"; @@ -130,7 +134,7 @@ <0x00058800 0x1f8>, /* PCS */ <0x00058600 0x044>; /* PCS misc*/ #phy-cells = <0>; - #clock-cells = <1>; + #clock-cells = <0>; clocks = <&gcc GCC_USB1_PIPE_CLK>; clock-names = "pipe0"; clock-output-names = "gcc_usb1_pipe_clk_src"; @@ -162,7 +166,7 @@ <&xo>; clock-names = "aux", "cfg_ahb", "ref"; - resets = <&gcc GCC_USB0_PHY_BCR>, + resets = <&gcc GCC_USB0_PHY_BCR>, <&gcc GCC_USB3PHY_0_PHY_BCR>; reset-names = "phy","common"; status = "disabled"; @@ -173,7 +177,7 @@ <0x00078800 0x1f8>, /* PCS */ <0x00078600 0x044>; /* PCS misc*/ #phy-cells = <0>; - #clock-cells = <1>; + #clock-cells = <0>; clocks = <&gcc GCC_USB0_PIPE_CLK>; clock-names = "pipe0"; clock-output-names = "gcc_usb0_pipe_clk_src"; @@ -347,6 +351,7 @@ compatible = "qcom,gcc-ipq8074"; reg = <0x01800000 0x80000>; #clock-cells = <0x1>; + #power-domain-cells = <1>; #reset-cells = <0x1>; }; @@ -375,7 +380,7 @@ cell-index = <0>; }; - sdhc_1: sdhci@7824900 { + sdhc_1: mmc@7824900 { compatible = "qcom,sdhci-msm-v4"; reg = <0x7824900 0x500>, <0x7824000 0x800>; reg-names = "hc_mem", "core_mem"; @@ -384,10 +389,11 @@ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&xo>, - <&gcc GCC_SDCC1_AHB_CLK>, - <&gcc GCC_SDCC1_APPS_CLK>; - clock-names = "xo", "iface", "core"; + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&xo>; + clock-names = "iface", "core", "xo"; + resets = <&gcc GCC_SDCC1_BCR>; max-frequency = <384000000>; mmc-ddr-1_8v; mmc-hs200-1_8v; @@ -534,7 +540,7 @@ status = "disabled"; }; - qpic_nand: nand@79b0000 { + qpic_nand: nand-controller@79b0000 { compatible = "qcom,ipq8074-nand"; reg = <0x079b0000 0x10000>; #address-cells = <1>; @@ -575,6 +581,8 @@ <133330000>, <19200000>; + power-domains = <&gcc USB0_GDSC>; + resets = <&gcc GCC_USB0_BCR>; status = "disabled"; @@ -615,6 +623,8 @@ <133330000>, <19200000>; + power-domains = <&gcc USB1_GDSC>; + resets = <&gcc GCC_USB1_BCR>; status = "disabled"; @@ -648,14 +658,6 @@ }; }; - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; - }; - watchdog: watchdog@b017000 { compatible = "qcom,kpss-wdt"; reg = <0xb017000 0x1000>; @@ -664,6 +666,14 @@ timeout-sec = <30>; }; + apcs_glb: mailbox@b111000 { + compatible = "qcom,ipq8074-apcs-apps-global"; + reg = <0x0b111000 0x6000>; + + #clock-cells = <1>; + #mbox-cells = <1>; + }; + timer@b120000 { #address-cells = <1>; #size-cells = <1>; @@ -847,4 +857,12 @@ status = "disabled"; }; }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; }; diff --git a/dts/src/arm64/qcom/msm8916-alcatel-idol347.dts b/dts/src/arm64/qcom/msm8916-alcatel-idol347.dts index 265e539e7e..3dc9619fde 100644 --- a/dts/src/arm64/qcom/msm8916-alcatel-idol347.dts +++ b/dts/src/arm64/qcom/msm8916-alcatel-idol347.dts @@ -27,7 +27,7 @@ label = "GPIO Buttons"; - volume-up { + button-volume-up { label = "Volume Up"; gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; diff --git a/dts/src/arm64/qcom/msm8916-asus-z00l.dts b/dts/src/arm64/qcom/msm8916-asus-z00l.dts index d4d33dd358..dd92070a12 100644 --- a/dts/src/arm64/qcom/msm8916-asus-z00l.dts +++ b/dts/src/arm64/qcom/msm8916-asus-z00l.dts @@ -28,14 +28,14 @@ label = "GPIO Buttons"; - volume-up { + button-volume-up { label = "Volume Up"; gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; debounce-interval = <15>; }; - volume-down { + button-volume-down { label = "Volume Down"; gpios = <&msmgpio 117 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; diff --git a/dts/src/arm64/qcom/msm8916-huawei-g7.dts b/dts/src/arm64/qcom/msm8916-huawei-g7.dts index 00488afb41..9e470c6727 100644 --- a/dts/src/arm64/qcom/msm8916-huawei-g7.dts +++ b/dts/src/arm64/qcom/msm8916-huawei-g7.dts @@ -39,7 +39,7 @@ label = "GPIO Buttons"; - volume-up { + button-volume-up { label = "Volume Up"; gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; diff --git a/dts/src/arm64/qcom/msm8916-longcheer-l8150.dts b/dts/src/arm64/qcom/msm8916-longcheer-l8150.dts index b3836dde8a..d85e7f7c08 100644 --- a/dts/src/arm64/qcom/msm8916-longcheer-l8150.dts +++ b/dts/src/arm64/qcom/msm8916-longcheer-l8150.dts @@ -39,7 +39,7 @@ label = "GPIO Buttons"; - volume-up { + button-volume-up { label = "Volume Up"; gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; diff --git a/dts/src/arm64/qcom/msm8916-longcheer-l8910.dts b/dts/src/arm64/qcom/msm8916-longcheer-l8910.dts index f9ce123471..b4812f093b 100644 --- a/dts/src/arm64/qcom/msm8916-longcheer-l8910.dts +++ b/dts/src/arm64/qcom/msm8916-longcheer-l8910.dts @@ -28,7 +28,7 @@ label = "GPIO Buttons"; - volume-up { + button-volume-up { label = "Volume Up"; gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; diff --git a/dts/src/arm64/qcom/msm8916-samsung-a2015-common.dtsi b/dts/src/arm64/qcom/msm8916-samsung-a2015-common.dtsi index 9b4b7de7ce..10f6509a87 100644 --- a/dts/src/arm64/qcom/msm8916-samsung-a2015-common.dtsi +++ b/dts/src/arm64/qcom/msm8916-samsung-a2015-common.dtsi @@ -31,13 +31,13 @@ label = "GPIO Buttons"; - volume-up { + button-volume-up { label = "Volume Up"; gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; - home { + button-home { label = "Home"; gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOMEPAGE>; @@ -52,7 +52,7 @@ label = "GPIO Hall Effect Sensor"; - hall-sensor { + event-hall-sensor { label = "Hall Effect Sensor"; gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>; linux,input-type = <EV_SW>; @@ -460,10 +460,18 @@ drive-strength = <2>; bias-disable; }; + + ts_int_default: ts-int-default { + pins = "gpio13"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; }; &pm8916_gpios { - nfc_clk_req: nfc-clk-req { + nfc_clk_req: nfc-clk-req-state { pins = "gpio2"; function = "func1"; diff --git a/dts/src/arm64/qcom/msm8916-samsung-a3u-eur.dts b/dts/src/arm64/qcom/msm8916-samsung-a3u-eur.dts index 4ba11b020f..bc198a2eea 100644 --- a/dts/src/arm64/qcom/msm8916-samsung-a3u-eur.dts +++ b/dts/src/arm64/qcom/msm8916-samsung-a3u-eur.dts @@ -128,12 +128,4 @@ drive-strength = <2>; bias-disable; }; - - ts_int_default: ts-int-default { - pins = "gpio13"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; }; diff --git a/dts/src/arm64/qcom/msm8916-samsung-a5u-eur.dts b/dts/src/arm64/qcom/msm8916-samsung-a5u-eur.dts index d978c9ac17..7f2ab1891d 100644 --- a/dts/src/arm64/qcom/msm8916-samsung-a5u-eur.dts +++ b/dts/src/arm64/qcom/msm8916-samsung-a5u-eur.dts @@ -69,12 +69,4 @@ drive-strength = <2>; bias-disable; }; - - ts_int_default: ts-int-default { - pins = "gpio13"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; }; diff --git a/dts/src/arm64/qcom/msm8916-samsung-j5.dts b/dts/src/arm64/qcom/msm8916-samsung-j5.dts index 6c408d61de..eabeed18cf 100644 --- a/dts/src/arm64/qcom/msm8916-samsung-j5.dts +++ b/dts/src/arm64/qcom/msm8916-samsung-j5.dts @@ -34,13 +34,13 @@ label = "GPIO Buttons"; - volume-up { + button-volume-up { label = "Volume Up"; gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; - home-key { + button-home { label = "Home Key"; gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOMEPAGE>; diff --git a/dts/src/arm64/qcom/msm8916-samsung-serranove.dts b/dts/src/arm64/qcom/msm8916-samsung-serranove.dts index 58dfbfff4c..439e89cf78 100644 --- a/dts/src/arm64/qcom/msm8916-samsung-serranove.dts +++ b/dts/src/arm64/qcom/msm8916-samsung-serranove.dts @@ -49,13 +49,13 @@ label = "GPIO Buttons"; - volume-up { + button-volume-up { label = "Volume Up"; gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; - home { + button-home { label = "Home"; gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOMEPAGE>; @@ -70,7 +70,7 @@ label = "GPIO Hall Effect Sensor"; - hall-sensor { + event-hall-sensor { label = "Hall Effect Sensor"; gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>; linux,input-type = <EV_SW>; diff --git a/dts/src/arm64/qcom/msm8916-wingtech-wt88047.dts b/dts/src/arm64/qcom/msm8916-wingtech-wt88047.dts index 69a44c6f57..84a352dcf9 100644 --- a/dts/src/arm64/qcom/msm8916-wingtech-wt88047.dts +++ b/dts/src/arm64/qcom/msm8916-wingtech-wt88047.dts @@ -29,7 +29,7 @@ label = "GPIO Buttons"; - volume-up { + button-volume-up { label = "Volume Up"; gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; diff --git a/dts/src/arm64/qcom/msm8916.dtsi b/dts/src/arm64/qcom/msm8916.dtsi index 05472510e2..48bc2e0912 100644 --- a/dts/src/arm64/qcom/msm8916.dtsi +++ b/dts/src/arm64/qcom/msm8916.dtsi @@ -216,7 +216,7 @@ }; }; - cpu_opp_table: cpu-opp-table { + cpu_opp_table: opp-table-cpu { compatible = "operating-points-v2"; opp-shared; @@ -301,6 +301,8 @@ rpmcc: clock-controller { compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc"; #clock-cells = <1>; + clocks = <&xo_board>; + clock-names = "xo"; }; rpmpd: power-controller { @@ -436,7 +438,7 @@ }; qfprom: qfprom@5c000 { - compatible = "qcom,qfprom"; + compatible = "qcom,msm8916-qfprom", "qcom,qfprom"; reg = <0x0005c000 0x1000>; #address-cells = <1>; #size-cells = <1>; @@ -1464,7 +1466,7 @@ #sound-dai-cells = <1>; }; - sdhc_1: sdhci@7824000 { + sdhc_1: mmc@7824000 { compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"; reg = <0x07824900 0x11c>, <0x07824000 0x800>; reg-names = "hc_mem", "core_mem"; @@ -1472,17 +1474,17 @@ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC1_APPS_CLK>, - <&gcc GCC_SDCC1_AHB_CLK>, + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, <&xo_board>; - clock-names = "core", "iface", "xo"; + clock-names = "iface", "core", "xo"; mmc-ddr-1_8v; bus-width = <8>; non-removable; status = "disabled"; }; - sdhc_2: sdhci@7864000 { + sdhc_2: mmc@7864000 { compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"; reg = <0x07864900 0x11c>, <0x07864000 0x800>; reg-names = "hc_mem", "core_mem"; @@ -1490,10 +1492,10 @@ interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC2_APPS_CLK>, - <&gcc GCC_SDCC2_AHB_CLK>, + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, <&xo_board>; - clock-names = "core", "iface", "xo"; + clock-names = "iface", "core", "xo"; bus-width = <4>; status = "disabled"; }; @@ -1788,8 +1790,8 @@ <&rpmpd MSM8916_VDDMX>; power-domain-names = "cx", "mx"; - qcom,state = <&wcnss_smp2p_out 0>; - qcom,state-names = "stop"; + qcom,smem-states = <&wcnss_smp2p_out 0>; + qcom,smem-state-names = "stop"; pinctrl-names = "default"; pinctrl-0 = <&wcnss_pin_a>; @@ -1858,6 +1860,8 @@ compatible = "qcom,msm8916-a53pll"; reg = <0x0b016000 0x40>; #clock-cells = <0>; + clocks = <&xo_board>; + clock-names = "xo"; }; timer@b020000 { diff --git a/dts/src/arm64/qcom/msm8953.dtsi b/dts/src/arm64/qcom/msm8953.dtsi index ffc3ec2cd3..8416a45ca4 100644 --- a/dts/src/arm64/qcom/msm8953.dtsi +++ b/dts/src/arm64/qcom/msm8953.dtsi @@ -215,7 +215,7 @@ firmware { scm: scm { - compatible = "qcom,scm-msm8953"; + compatible = "qcom,scm-msm8953", "qcom,scm"; clocks = <&gcc GCC_CRYPTO_CLK>, <&gcc GCC_CRYPTO_AXI_CLK>, <&gcc GCC_CRYPTO_AHB_CLK>; @@ -795,7 +795,7 @@ }; }; - sdhc_1: sdhci@7824900 { + sdhc_1: mmc@7824900 { compatible = "qcom,msm8953-sdhci", "qcom,sdhci-msm-v4"; reg = <0x7824900 0x500>, <0x7824000 0x800>; @@ -855,7 +855,7 @@ }; }; - sdhc_2: sdhci@7864900 { + sdhc_2: mmc@7864900 { compatible = "qcom,msm8953-sdhci", "qcom,sdhci-msm-v4"; reg = <0x7864900 0x500>, <0x7864000 0x800>; diff --git a/dts/src/arm64/qcom/msm8992-xiaomi-libra.dts b/dts/src/arm64/qcom/msm8992-xiaomi-libra.dts index afa91ca9a3..cbe11c060d 100644 --- a/dts/src/arm64/qcom/msm8992-xiaomi-libra.dts +++ b/dts/src/arm64/qcom/msm8992-xiaomi-libra.dts @@ -51,13 +51,11 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; - button@0 { + button { label = "Volume Up"; gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>; linux,input-type = <1>; diff --git a/dts/src/arm64/qcom/msm8994-msft-lumia-octagon.dtsi b/dts/src/arm64/qcom/msm8994-msft-lumia-octagon.dtsi index cc038f9b64..61ec905025 100644 --- a/dts/src/arm64/qcom/msm8994-msft-lumia-octagon.dtsi +++ b/dts/src/arm64/qcom/msm8994-msft-lumia-octagon.dtsi @@ -64,7 +64,7 @@ compatible = "gpio-keys"; autorepeat; - volupkey { + volup-key { label = "Volume Up"; gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>; linux,input-type = <1>; @@ -73,7 +73,7 @@ debounce-interval = <15>; }; - camsnapkey { + camsnap-key { label = "Camera Snapshot"; gpios = <&pm8994_gpios 4 GPIO_ACTIVE_LOW>; linux,input-type = <1>; @@ -82,7 +82,7 @@ debounce-interval = <15>; }; - camfocuskey { + camfocus-key { label = "Camera Focus"; gpios = <&pm8994_gpios 5 GPIO_ACTIVE_LOW>; linux,input-type = <1>; @@ -100,7 +100,7 @@ label = "GPIO Hall Effect Sensor"; - hall-front-sensor { + event-hall-front-sensor { label = "Hall Effect Front Sensor"; gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>; linux,input-type = <EV_SW>; @@ -108,7 +108,7 @@ linux,can-disable; }; - hall-back-sensor { + event-hall-back-sensor { label = "Hall Effect Back Sensor"; gpios = <&tlmm 75 GPIO_ACTIVE_HIGH>; linux,input-type = <EV_SW>; @@ -470,7 +470,7 @@ }; &pm8994_gpios { - bt_en_gpios: bt_en_gpios { + bt_en_gpios: bt-en-gpios-state { pinconf { pins = "gpio19"; function = PMIC_GPIO_FUNC_NORMAL; @@ -481,7 +481,7 @@ }; }; - divclk4_pin_a: divclk4 { + divclk4_pin_a: divclk4-state { pinconf { pins = "gpio18"; function = PMIC_GPIO_FUNC_FUNC2; @@ -519,21 +519,24 @@ * TODO: remove once a driver is available * TODO: add VBUS GPIO 5 */ - hd3ss460_pol: pol_low { + hd3ss460_pol: pol-low-state { pins = "gpio8"; - drive-strength = <3>; + function = PMIC_GPIO_FUNC_NORMAL; + qcom,drive-strength = <3>; bias-pull-down; }; - hd3ss460_amsel: amsel_high { + hd3ss460_amsel: amsel-high-state { pins = "gpio9"; - drive-strength = <1>; + function = PMIC_GPIO_FUNC_NORMAL; + qcom,drive-strength = <1>; bias-pull-up; }; - hd3ss460_en: en_high { + hd3ss460_en: en-high-state { pins = "gpio10"; - drive-strength = <1>; + function = PMIC_GPIO_FUNC_NORMAL; + qcom,drive-strength = <1>; bias-pull-up; }; }; diff --git a/dts/src/arm64/qcom/msm8994-sony-xperia-kitakami.dtsi b/dts/src/arm64/qcom/msm8994-sony-xperia-kitakami.dtsi index e5a45af0bd..f430d79719 100644 --- a/dts/src/arm64/qcom/msm8994-sony-xperia-kitakami.dtsi +++ b/dts/src/arm64/qcom/msm8994-sony-xperia-kitakami.dtsi @@ -27,13 +27,11 @@ /* Kitakami firmware doesn't support PSCI */ /delete-node/ psci; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; - button@0 { + button-0 { label = "Volume Down"; gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>; linux,input-type = <1>; @@ -42,7 +40,7 @@ debounce-interval = <15>; }; - button@1 { + button-1 { label = "Volume Up"; gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>; linux,input-type = <1>; @@ -51,7 +49,7 @@ debounce-interval = <15>; }; - button@2 { + button-2 { label = "Camera Snapshot"; gpios = <&pm8994_gpios 4 GPIO_ACTIVE_LOW>; linux,input-type = <1>; @@ -60,7 +58,7 @@ debounce-interval = <15>; }; - button@3 { + button-3 { label = "Camera Focus"; gpios = <&pm8994_gpios 5 GPIO_ACTIVE_LOW>; linux,input-type = <1>; diff --git a/dts/src/arm64/qcom/msm8994.dtsi b/dts/src/arm64/qcom/msm8994.dtsi index 1ac2913b18..8bc6c070e3 100644 --- a/dts/src/arm64/qcom/msm8994.dtsi +++ b/dts/src/arm64/qcom/msm8994.dtsi @@ -461,7 +461,7 @@ }; }; - sdhc1: sdhci@f9824900 { + sdhc1: mmc@f9824900 { compatible = "qcom,msm8994-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>; reg-names = "hc_mem", "core_mem"; @@ -470,10 +470,10 @@ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC1_APPS_CLK>, - <&gcc GCC_SDCC1_AHB_CLK>, + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, <&xo_board>; - clock-names = "core", "iface", "xo"; + clock-names = "iface", "core", "xo"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>; @@ -484,7 +484,7 @@ status = "disabled"; }; - sdhc2: sdhci@f98a4900 { + sdhc2: mmc@f98a4900 { compatible = "qcom,msm8994-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; reg-names = "hc_mem", "core_mem"; @@ -493,10 +493,10 @@ <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC2_APPS_CLK>, - <&gcc GCC_SDCC2_AHB_CLK>, - <&xo_board>; - clock-names = "core", "iface", "xo"; + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&xo_board>; + clock-names = "iface", "core", "xo"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; @@ -1069,11 +1069,12 @@ <600000000>; }; - ocmem: ocmem@fdd00000 { + ocmem: sram@fdd00000 { compatible = "qcom,msm8974-ocmem"; reg = <0xfdd00000 0x2000>, <0xfec00000 0x200000>; reg-names = "ctrl", "mem"; + ranges = <0 0xfec00000 0x200000>; clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, <&mmcc OCMEMCX_OCMEMNOC_CLK>; clock-names = "core", "iface"; diff --git a/dts/src/arm64/qcom/msm8996-pmi8996-sony-xperia-tone-dora.dts b/dts/src/arm64/qcom/msm8996-pmi8996-sony-xperia-tone-dora.dts deleted file mode 100644 index b018693600..0000000000 --- a/dts/src/arm64/qcom/msm8996-pmi8996-sony-xperia-tone-dora.dts +++ /dev/null @@ -1,11 +0,0 @@ -// SPDX-License-Identifier: BSD-3-Clause -/* - * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> - */ - -#include "msm8996-sony-xperia-tone-dora.dts" -#include "pmi8996.dtsi" - -/ { - model = "Sony Xperia X Performance (PMI8996)"; -}; diff --git a/dts/src/arm64/qcom/msm8996-pmi8996-sony-xperia-tone-kagura.dts b/dts/src/arm64/qcom/msm8996-pmi8996-sony-xperia-tone-kagura.dts deleted file mode 100644 index 842ea3cf55..0000000000 --- a/dts/src/arm64/qcom/msm8996-pmi8996-sony-xperia-tone-kagura.dts +++ /dev/null @@ -1,11 +0,0 @@ -// SPDX-License-Identifier: BSD-3-Clause -/* - * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> - */ - -#include "msm8996-sony-xperia-tone-kagura.dts" -#include "pmi8996.dtsi" - -/ { - model = "Sony Xperia XZ (PMI8996)"; -}; diff --git a/dts/src/arm64/qcom/msm8996-pmi8996-sony-xperia-tone-keyaki.dts b/dts/src/arm64/qcom/msm8996-pmi8996-sony-xperia-tone-keyaki.dts deleted file mode 100644 index b3f9062da4..0000000000 --- a/dts/src/arm64/qcom/msm8996-pmi8996-sony-xperia-tone-keyaki.dts +++ /dev/null @@ -1,11 +0,0 @@ -// SPDX-License-Identifier: BSD-3-Clause -/* - * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> - */ - -#include "msm8996-sony-xperia-tone-keyaki.dts" -#include "pmi8996.dtsi" - -/ { - model = "Sony Xperia XZs (PMI8996)"; -}; diff --git a/dts/src/arm64/qcom/msm8996-sony-xperia-tone.dtsi b/dts/src/arm64/qcom/msm8996-sony-xperia-tone.dtsi index ca3c633f5a..e165b5e890 100644 --- a/dts/src/arm64/qcom/msm8996-sony-xperia-tone.dtsi +++ b/dts/src/arm64/qcom/msm8996-sony-xperia-tone.dtsi @@ -8,6 +8,7 @@ #include "msm8996.dtsi" #include "pm8994.dtsi" #include "pmi8994.dtsi" +#include "pmi8996.dtsi" #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> @@ -20,7 +21,6 @@ / { qcom,msm-id = <246 0x30001>; /* MSM8996 V3.1 (Final) */ - qcom,pmic-id = <0x20009 0x2000a 0 0>; /* PM8994 + PMI8994 */ qcom,board-id = <8 0>; chosen { @@ -42,11 +42,6 @@ ecc-size = <16>; }; - cont_splash_mem: memory@83401000 { - reg = <0 0x83401000 0 0x23ff000>; - no-map; - }; - adsp_mem: adsp@8ea00000 { reg = <0x0 0x8ea00000 0x0 0x1a00000>; no-map; @@ -247,14 +242,14 @@ * probably a reason for it, and just to be on the safe side, we follow suit. */ pm8994_gpios_defaults: pm8994-gpios-default-state { - pm8994-gpio1-nc { + pm8994-gpio1-nc-pins { pins = "gpio1"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; bias-high-impedance; }; - vol-down-n { + vol-down-n-pins { pins = "gpio2"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; @@ -264,7 +259,7 @@ power-source = <PM8994_GPIO_S4>; }; - vol-up-n { + vol-up-n-pins { pins = "gpio3"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; @@ -273,7 +268,7 @@ power-source = <PM8994_GPIO_S4>; }; - camera-snapshot-n { + camera-snapshot-n-pins { pins = "gpio4"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; @@ -283,7 +278,7 @@ power-source = <PM8994_GPIO_S4>; }; - camera-focus-n { + camera-focus-n-pins { pins = "gpio5"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; @@ -293,7 +288,7 @@ power-source = <PM8994_GPIO_S4>; }; - pm8994-gpio6-nc { + pm8994-gpio6-nc-pins { pins = "gpio6"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; @@ -301,7 +296,7 @@ power-source = <PM8994_GPIO_VPH>; }; - nfc-download { + nfc-download-pins { pins = "gpio7"; function = PMIC_GPIO_FUNC_NORMAL; output-low; @@ -311,7 +306,7 @@ power-source = <PM8994_GPIO_S4>; }; - pm8994-gpio8-nc { + pm8994-gpio8-nc-pins { pins = "gpio8"; function = PMIC_GPIO_FUNC_NORMAL; output-low; @@ -321,7 +316,7 @@ power-source = <PM8994_GPIO_VPH>; }; - pm8994-gpio9-nc { + pm8994-gpio9-nc-pins { pins = "gpio9"; function = PMIC_GPIO_FUNC_NORMAL; output-high; @@ -331,7 +326,7 @@ power-source = <PM8994_GPIO_VPH>; }; - nfc-clock { + nfc-clock-pins { pins = "gpio10"; function = PMIC_GPIO_FUNC_NORMAL; input-enable; @@ -341,7 +336,7 @@ power-source = <PM8994_GPIO_S4>; }; - pm8994-gpio11-nc { + pm8994-gpio11-nc-pins { pins = "gpio11"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; @@ -349,7 +344,7 @@ power-source = <PM8994_GPIO_VPH>; }; - pm8994-gpio12-nc { + pm8994-gpio12-nc-pins { pins = "gpio12"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; @@ -357,7 +352,7 @@ power-source = <PM8994_GPIO_VPH>; }; - ear-enable { + ear-enable-pins { pins = "gpio13"; function = PMIC_GPIO_FUNC_NORMAL; output-high; @@ -367,7 +362,7 @@ power-source = <PM8994_GPIO_S4>; }; - pm8994-gpio14-nc { + pm8994-gpio14-nc-pins { pins = "gpio14"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; @@ -377,7 +372,7 @@ power-source = <PM8994_GPIO_VPH>; }; - pm-divclk1-gpio { + pm-divclk1-gpio-pins { pins = "gpio15"; function = "func1"; output-high; @@ -387,13 +382,13 @@ power-source = <PM8994_GPIO_VPH>; }; - pmi-clk-gpio { + pmi-clk-gpio-pins { pins = "gpio16"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; }; - pm8994-gpio17-nc { + pm8994-gpio17-nc-pins { pins = "gpio17"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; @@ -401,7 +396,7 @@ power-source = <PM8994_GPIO_VPH>; }; - rome-sleep { + rome-sleep-pins { pins = "gpio18"; function = PMIC_GPIO_FUNC_FUNC2; output-low; @@ -411,7 +406,7 @@ power-source = <PM8994_GPIO_S4>; }; - pm8994-gpio19-nc { + pm8994-gpio19-nc-pins { pins = "gpio19"; function = PMIC_GPIO_FUNC_NORMAL; output-low; @@ -421,7 +416,7 @@ power-source = <PM8994_GPIO_VPH>; }; - pm8994-gpio22-nc { + pm8994-gpio22-nc-pins { pins = "gpio22"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; @@ -446,34 +441,34 @@ "RF_ID"; pm8994_mpps_defaults: pm8994-mpps-default-state { - lcd-id_adc-mpp { + lcd-id_adc-mpp-pins { pins = "mpp2"; function = "analog"; input-enable; qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH6>; }; - pm-mpp4-nc { + pm-mpp4-nc-pins { pins = "mpp4"; function = "digital"; bias-high-impedance; power-source = <PM8994_GPIO_VPH>; }; - flash-therm-mpp { + flash-therm-mpp-pins { pins = "mpp5"; function = "analog"; input-enable; qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH5>; }; - mpp6-nc { + mpp6-nc-pins { pins = "mpp6"; function = "digital"; bias-high-impedance; }; - rf-id-mpp { + rf-id-mpp-pins { pins = "mpp8"; function = "analog"; input-enable; @@ -504,7 +499,7 @@ "NC"; pmi8994_gpios_defaults: pmi8994-gpios-default-state { - vib-ldo-en-gpio { + vib-ldo-en-gpio-pins { pins = "gpio1"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; @@ -513,7 +508,7 @@ power-source = <PM8994_GPIO_S4>; }; - pmi-gpio2-nc { + pmi-gpio2-nc-pins { pins = "gpio2"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; @@ -523,7 +518,7 @@ power-source = <PM8994_GPIO_VPH>; }; - pmi-gpio3-nc { + pmi-gpio3-nc-pins { pins = "gpio3"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; @@ -533,7 +528,7 @@ power-source = <PM8994_GPIO_VPH>; }; - pmi-gpio4-nc { + pmi-gpio4-nc-pins { pins = "gpio4"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; @@ -542,7 +537,7 @@ power-source = <PM8994_GPIO_S4>; }; - pmi-gpio5-nc { + pmi-gpio5-nc-pins { pins = "gpio5"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; @@ -551,7 +546,7 @@ power-source = <PM8994_GPIO_S4>; }; - pmi-gpio6-nc { + pmi-gpio6-nc-pins { pins = "gpio6"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; @@ -560,7 +555,7 @@ power-source = <PM8994_GPIO_S4>; }; - pmi-gpio7-nc { + pmi-gpio7-nc-pins { pins = "gpio7"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; @@ -569,7 +564,7 @@ power-source = <PM8994_GPIO_S4>; }; - pmi-gpio8-nc { + pmi-gpio8-nc-pins { pins = "gpio8"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; @@ -578,13 +573,13 @@ power-source = <PM8994_GPIO_S4>; }; - usb-switch-sel { + usb-switch-sel-pins { pins = "gpio9"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; }; - pmi-gpio10-nc { + pmi-gpio10-nc-pins { pins = "gpio10"; function = PMIC_GPIO_FUNC_NORMAL; output-low; diff --git a/dts/src/arm64/qcom/msm8996-xiaomi-common.dtsi b/dts/src/arm64/qcom/msm8996-xiaomi-common.dtsi index a7090befc1..6276499798 100644 --- a/dts/src/arm64/qcom/msm8996-xiaomi-common.dtsi +++ b/dts/src/arm64/qcom/msm8996-xiaomi-common.dtsi @@ -38,10 +38,10 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - vol_up { + key-vol-up { label = "Volume Up"; gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; @@ -49,7 +49,7 @@ debounce-interval = <15>; }; - dome { + key-dome { label = "Home"; gpios = <&tlmm 34 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOME>; @@ -608,7 +608,7 @@ }; &pm8994_gpios { - wlan_en_default: wlan-en-default { + wlan_en_default: wlan-en-state { pins = "gpio8"; function = PMIC_GPIO_FUNC_NORMAL; output-low; @@ -617,7 +617,7 @@ bias-disable; }; - rome_enable_default: rome-enable-default { + rome_enable_default: rome-enable-state { pins = "gpio9"; function = PMIC_GPIO_FUNC_NORMAL; output-high; @@ -625,7 +625,7 @@ power-source = <PM8994_GPIO_VPH>; }; - divclk1_default: divclk1_default { + divclk1_default: divclk1-state { pins = "gpio15"; function = PMIC_GPIO_FUNC_FUNC1; bias-disable; @@ -633,7 +633,7 @@ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; }; - divclk4_pin_a: divclk4 { + divclk4_pin_a: divclk4-state { pins = "gpio18"; function = PMIC_GPIO_FUNC_FUNC2; bias-disable; diff --git a/dts/src/arm64/qcom/msm8996-xiaomi-gemini.dts b/dts/src/arm64/qcom/msm8996-xiaomi-gemini.dts index 22978d06f8..25f30ec277 100644 --- a/dts/src/arm64/qcom/msm8996-xiaomi-gemini.dts +++ b/dts/src/arm64/qcom/msm8996-xiaomi-gemini.dts @@ -156,7 +156,7 @@ &sound { compatible = "qcom,apq8096-sndcard"; model = "gemini"; - audio-routing = "RX_BIAS", "MCLK", + audio-routing = "RX_BIAS", "MCLK", "MM_DL1", "MultiMedia1 Playback", "MM_DL2", "MultiMedia2 Playback", "MultiMedia3 Capture", "MM_UL3"; @@ -257,7 +257,7 @@ "UIM_BATT_ALARM", /* GPIO_21 */ "NC"; /* GPIO_22 */ - divclk2_pin_a: divclk2 { + divclk2_pin_a: divclk2-state { pins = "gpio16"; function = PMIC_GPIO_FUNC_FUNC2; bias-disable; diff --git a/dts/src/arm64/qcom/msm8996-xiaomi-natrium.dts b/dts/src/arm64/qcom/msm8996-xiaomi-natrium.dts new file mode 100644 index 0000000000..ff4673ee9e --- /dev/null +++ b/dts/src/arm64/qcom/msm8996-xiaomi-natrium.dts @@ -0,0 +1,414 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Alec Su <ae40515@yahoo.com.tw> + */ + +/dts-v1/; + +#include "msm8996-xiaomi-common.dtsi" +#include "pmi8996.dtsi" +#include <dt-bindings/sound/qcom,q6afe.h> +#include <dt-bindings/sound/qcom,q6asm.h> + +/ { + model = "Xiaomi Mi 5s Plus"; + compatible = "xiaomi,natrium", "qcom,msm8996"; + chassis-type = "handset"; + qcom,msm-id = <305 0x10000>; + qcom,board-id = <47 0>; +}; + +&adsp_pil { + firmware-name = "qcom/msm8996/natrium/adsp.mbn"; +}; + +&blsp2_i2c6 { + touchscreen@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + interrupt-parent = <&tlmm>; + interrupts = <125 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vdd_3v2_tp>; + syna,reset-delay-ms = <200>; + syna,startup-delay-ms = <5>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&touchscreen_default>; + pinctrl-1 = <&touchscreen_sleep>; + }; +}; + +&dsi0 { + status = "okay"; + + vdda-supply = <&vreg_l2a_1p25>; + vcca-supply = <&vreg_l28a_0p925>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mdss_dsi_default &mdss_te_default>; + pinctrl-1 = <&mdss_dsi_sleep &mdss_te_sleep>; + + panel: panel@0 { + compatible = "jdi,fhd-r63452"; + reg = <0>; + reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; + backlight = <&pmi8994_wled>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; +}; + +&dsi0_out { + remote-endpoint = <&panel_in>; +}; + +&gpu { + zap-shader { + firmware-name = "qcom/msm8996/natrium/a530_zap.mbn"; + }; +}; + +&mss_pil { + firmware-name = "qcom/msm8996/natrium/mba.mbn", + "qcom/msm8996/natrium/modem.mbn"; +}; + +&pmi8994_wled { + status = "okay"; + + qcom,enabled-strings = <0 1>; + qcom,switching-freq = <600>; +}; + +&q6asmdai { + dai@0 { + reg = <0>; + }; + + dai@1 { + reg = <1>; + }; + + dai@2 { + reg = <2>; + }; +}; + +&slpi_pil { + firmware-name = "qcom/msm8996/natrium/slpi.mbn"; +}; + +&sound { + compatible = "qcom,apq8096-sndcard"; + model = "natrium"; + audio-routing = "RX_BIAS", "MCLK"; + + mm1-dai-link { + link-name = "MultiMedia1"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + mm2-dai-link { + link-name = "MultiMedia2"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + mm3-dai-link { + link-name = "MultiMedia3"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + slim-dai-link { + link-name = "SLIM Playback"; + cpu { + sound-dai = <&q6afedai SLIMBUS_6_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9335 6>; + }; + }; + + slimcap-dai-link { + link-name = "SLIM Capture"; + cpu { + sound-dai = <&q6afedai SLIMBUS_0_TX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9335 1>; + }; + }; +}; + +&venus { + firmware-name = "qcom/msm8996/natrium/venus.mbn"; +}; + +&rpm_requests { + pm8994-regulators { + vreg_l3a_0p875: l3 { + regulator-name = "vreg_l3a_0p875"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1300000>; + }; + vreg_l11a_1p1: l11 { + regulator-name = "vreg_l11a_1p1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + vreg_l17a_2p8: l17 { + regulator-name = "vreg_l17a_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + vreg_l18a_2p8: l18 { + regulator-name = "vreg_l18a_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + vreg_l29a_2p8: l29 { + regulator-name = "vreg_l29a_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + }; +}; + +&pm8994_gpios { + gpio-line-names = + "NC", /* GPIO_1 */ + "VOL_UP_N", /* GPIO_2 */ + "SPKR_ID", /* GPIO_3 */ + "PWM_HAPTICS", /* GPIO_4 */ + "INFARED_DRV", /* GPIO_5 */ + "NC", /* GPIO_6 */ + "KEYPAD_LED_EN_A", /* GPIO_7 */ + "WL_EN", /* GPIO_8 */ + "3P3_ENABLE", /* GPIO_9 */ + "NC", /* GPIO_10 */ + "NC", /* GPIO_11 */ + "NC", /* GPIO_12 */ + "NC", /* GPIO_13 */ + "NC", /* GPIO_14 */ + "DIVCLK1_CDC", /* GPIO_15 */ + "DIVCLK2_HAPTICS", /* GPIO_16 */ + "NC", /* GPIO_17 */ + "32KHz_CLK_IN", /* GPIO_18 */ + "BT_EN", /* GPIO_19 */ + "PMIC_SLB", /* GPIO_20 */ + "UIM_BATT_ALARM", /* GPIO_21 */ + "NC"; /* GPIO_22 */ +}; + +&pm8994_mpps { + gpio-line-names = + "NC", /* MPP_1 */ + "CCI_TIMER1", /* MPP_2 */ + "PMIC_SLB", /* MPP_3 */ + "EXT_FET_WLED_PWR_EN_N",/* MPP_4 */ + "NC", /* MPP_5 */ + "NC", /* MPP_6 */ + "NC", /* MPP_7 */ + "NC"; /* MPP_8 */ +}; + +&pmi8994_gpios { + gpio-line-names = + "NC", /* GPIO_1 */ + "SPKR_PA_EN", /* GPIO_2 */ + "NC", /* GPIO_3 */ + "NC", /* GPIO_4 */ + "NC", /* GPIO_5 */ + "NC", /* GPIO_6 */ + "NC", /* GPIO_7 */ + "NC", /* GPIO_8 */ + "NC", /* GPIO_9 */ + "NC"; /* GPIO_10 */ +}; + +&tlmm { + gpio-line-names = + "ESE_SPI_MOSI", /* GPIO_0 */ + "ESE_SPI_MISO", /* GPIO_1 */ + "NC", /* GPIO_2 */ + "ESE_SPI_CLK", /* GPIO_3 */ + "MSM_UART_TX", /* GPIO_4 */ + "MSM_UART_RX", /* GPIO_5 */ + "NFC_I2C_SDA", /* GPIO_6 */ + "NFC_I2C_SCL", /* GPIO_7 */ + "LCD0_RESET_N", /* GPIO_8 */ + "NFC_IRQ", /* GPIO_9 */ + "LCD_TE", /* GPIO_10 */ + "LCD_ID_DET1", /* GPIO_11 */ + "NFC_DISABLE", /* GPIO_12 */ + "CAM_MCLK0", /* GPIO_13 */ + "CAM_MCLK1", /* GPIO_14 */ + "CAM_MCLK2", /* GPIO_15 */ + "ESE_PWR_REQ", /* GPIO_16 */ + "CCI_I2C_SDA0", /* GPIO_17 */ + "CCI_I2C_SCL0", /* GPIO_18 */ + "CCI_I2C_SDA1", /* GPIO_19 */ + "CCI_I2C_SCL1", /* GPIO_20 */ + "NFC_DWL_REQ", /* GPIO_21 */ + "CCI_TIMER1", /* GPIO_22 */ + "WEBCAM1_RESET_N", /* GPIO_23 */ + "ESE_IRQ", /* GPIO_24 */ + "NC", /* GPIO_25 */ + "WEBCAM1_STANDBY", /* GPIO_26 */ + "NC", /* GPIO_27 */ + "NC", /* GPIO_28 */ + "NC", /* GPIO_29 */ + "CAM_VDD_1P2_EN_2", /* GPIO_30 */ + "CAM_RESET_0", /* GPIO_31 */ + "CAM_RESET_1", /* GPIO_32 */ + "NC", /* GPIO_33 */ + "NC", /* GPIO_34 */ + "PCI_E0_RST_N", /* GPIO_35 */ + "PCI_E0_CLKREQ_N", /* GPIO_36 */ + "PCI_E0_WAKE", /* GPIO_37 */ + "CHARGER_INT", /* GPIO_38 */ + "CHARGER_RESET", /* GPIO_39 */ + "NC", /* GPIO_40 */ + "QCA_UART_TXD", /* GPIO_41 */ + "QCA_UART_RXD", /* GPIO_42 */ + "QCA_UART_CTS", /* GPIO_43 */ + "QCA_UART_RTS", /* GPIO_44 */ + "MAWC_UART_TX", /* GPIO_45 */ + "MAWC_UART_RX", /* GPIO_46 */ + "NC", /* GPIO_47 */ + "NC", /* GPIO_48 */ + "NC", /* GPIO_49 */ + "FP_SPI_RST", /* GPIO_50 */ + "TYPEC_I2C_SDA", /* GPIO_51 */ + "TYPEC_I2C_SCL", /* GPIO_52 */ + "CODEC_INT2_N", /* GPIO_53 */ + "CODEC_INT1_N", /* GPIO_54 */ + "APPS_I2C7_SDA", /* GPIO_55 */ + "APPS_I2C7_SCL", /* GPIO_56 */ + "FORCE_USB_BOOT", /* GPIO_57 */ + "NC", /* GPIO_58 */ + "NC", /* GPIO_59 */ + "NC", /* GPIO_60 */ + "NC", /* GPIO_61 */ + "ESE_RSTN", /* GPIO_62 */ + "TYPEC_INT", /* GPIO_63 */ + "CODEC_RESET_N", /* GPIO_64 */ + "PCM_CLK", /* GPIO_65 */ + "PCM_SYNC", /* GPIO_66 */ + "PCM_DIN", /* GPIO_67 */ + "PCM_DOUT", /* GPIO_68 */ + "CDC_44K1_CLK", /* GPIO_69 */ + "SLIMBUS_CLK", /* GPIO_70 */ + "SLIMBUS_DATA0", /* GPIO_71 */ + "SLIMBUS_DATA1", /* GPIO_72 */ + "LDO_5V_IN_EN", /* GPIO_73 */ + "TYPEC_EN_N", /* GPIO_74 */ + "NC", /* GPIO_75 */ + "NC", /* GPIO_76 */ + "NC", /* GPIO_77 */ + "NC", /* GPIO_78 */ + "NC", /* GPIO_79 */ + "SENSOR_RESET_N", /* GPIO_80 */ + "FP_SPI_MOSI", /* GPIO_81 */ + "FP_SPI_MISO", /* GPIO_82 */ + "FP_SPI_CS_N", /* GPIO_83 */ + "FP_SPI_CLK", /* GPIO_84 */ + "NC", /* GPIO_85 */ + "CAM_VDD_1P2_EN", /* GPIO_86 */ + "MSM_TS_I2C_SDA", /* GPIO_87 */ + "MSM_TS_I2C_SCL", /* GPIO_88 */ + "TS_RESOUT_N", /* GPIO_89 */ + "ESE_SPI_CS_N", /* GPIO_90 */ + "NC", /* GPIO_91 */ + "CAM2_AVDD_EN", /* GPIO_92 */ + "CAM2_VCM_EN", /* GPIO_93 */ + "NC", /* GPIO_94 */ + "NC", /* GPIO_95 */ + "NC", /* GPIO_96 */ + "GRFC_0", /* GPIO_97 */ + "GRFC_1", /* GPIO_98 */ + "NC", /* GPIO_99 */ + "GRFC_3", /* GPIO_100 */ + "GRFC_4", /* GPIO_101 */ + "GRFC_5", /* GPIO_102 */ + "NC", /* GPIO_103 */ + "GRFC_7", /* GPIO_104 */ + "UIM2_DATA", /* GPIO_105 */ + "UIM2_CLK", /* GPIO_106 */ + "UIM2_RESET", /* GPIO_107 */ + "UIM2_PRESENT", /* GPIO_108 */ + "UIM1_DATA", /* GPIO_109 */ + "UIM1_CLK", /* GPIO_110 */ + "UIM1_RESET", /* GPIO_111 */ + "UIM1_PRESENT", /* GPIO_112 */ + "UIM_BATT_ALARM", /* GPIO_113 */ + "GRFC_8", /* GPIO_114 */ + "GRFC_9", /* GPIO_115 */ + "TX_GTR_THRES", /* GPIO_116 */ + "ACCEL_INT", /* GPIO_117 */ + "GYRO_INT", /* GPIO_118 */ + "COMPASS_INT", /* GPIO_119 */ + "PROXIMITY_INT_N", /* GPIO_120 */ + "FP_IRQ", /* GPIO_121 */ + "P_SENSE", /* GPIO_122 */ + "HALL_INTR2", /* GPIO_123 */ + "HALL_INTR1", /* GPIO_124 */ + "TS_INT_N", /* GPIO_125 */ + "NC", /* GPIO_126 */ + "GRFC_11", /* GPIO_127 */ + "NC", /* GPIO_128 */ + "EXT_GPS_LNA_EN", /* GPIO_129 */ + "NC", /* GPIO_130 */ + "LCD_ID_DET2", /* GPIO_131 */ + "LCD_TE2", /* GPIO_132 */ + "GRFC_14", /* GPIO_133 */ + "GSM_TX2_PHASE_D", /* GPIO_134 */ + "NC", /* GPIO_135 */ + "GRFC_15", /* GPIO_136 */ + "RFFE3_DATA", /* GPIO_137 */ + "RFFE3_CLK", /* GPIO_138 */ + "NC", /* GPIO_139 */ + "NC", /* GPIO_140 */ + "RFFE5_DATA", /* GPIO_141 */ + "RFFE5_CLK", /* GPIO_142 */ + "NC", /* GPIO_143 */ + "COEX_UART_TX", /* GPIO_144 */ + "COEX_UART_RX", /* GPIO_145 */ + "RFFE2_DATA", /* GPIO_146 */ + "RFFE2_CLK", /* GPIO_147 */ + "RFFE1_DATA", /* GPIO_148 */ + "RFFE1_CLK"; /* GPIO_149 */ + + touchscreen_default: touchscreen-default { + pins = "gpio89", "gpio125"; + function = "gpio"; + drive-strength = <10>; + bias-pull-up; + }; + + touchscreen_sleep: touchscreen-sleep { + pins = "gpio89", "gpio125"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/dts/src/arm64/qcom/msm8996-xiaomi-scorpio.dts b/dts/src/arm64/qcom/msm8996-xiaomi-scorpio.dts index 1e2dd6763a..30a9e4bed4 100644 --- a/dts/src/arm64/qcom/msm8996-xiaomi-scorpio.dts +++ b/dts/src/arm64/qcom/msm8996-xiaomi-scorpio.dts @@ -137,7 +137,7 @@ &sound { compatible = "qcom,apq8096-sndcard"; model = "scorpio"; - audio-routing = "RX_BIAS", "MCLK"; + audio-routing = "RX_BIAS", "MCLK"; mm1-dai-link { link-name = "MultiMedia1"; diff --git a/dts/src/arm64/qcom/msm8996.dtsi b/dts/src/arm64/qcom/msm8996.dtsi index 9932186f7c..742eac4ce9 100644 --- a/dts/src/arm64/qcom/msm8996.dtsi +++ b/dts/src/arm64/qcom/msm8996.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/clock/qcom,gcc-msm8996.h> #include <dt-bindings/clock/qcom,mmcc-msm8996.h> #include <dt-bindings/clock/qcom,rpmcc.h> +#include <dt-bindings/interconnect/qcom,msm8996.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,apr.h> #include <dt-bindings/thermal/thermal.h> @@ -357,7 +358,7 @@ firmware { scm { - compatible = "qcom,scm-msm8996"; + compatible = "qcom,scm-msm8996", "qcom,scm"; qcom,dload-mode = <&tcsr 0x13000>; }; }; @@ -463,6 +464,8 @@ rpmcc: qcom,rpmcc { compatible = "qcom,rpmcc-msm8996", "qcom,rpmcc"; #clock-cells = <1>; + clocks = <&xo_board>; + clock-names = "xo"; }; rpmpd: power-controller { @@ -585,12 +588,12 @@ ranges = <0 0 0 0xffffffff>; compatible = "simple-bus"; - pcie_phy: phy@34000 { + pcie_phy: phy-wrapper@34000 { compatible = "qcom,msm8996-qmp-pcie-phy"; reg = <0x00034000 0x488>; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0x0 0x00034000 0x4000>; clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, <&gcc GCC_PCIE_PHY_CFG_AHB_CLK>, @@ -601,46 +604,55 @@ <&gcc GCC_PCIE_PHY_COM_BCR>, <&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>; reset-names = "phy", "common", "cfg"; + status = "disabled"; - pciephy_0: phy@35000 { - reg = <0x00035000 0x130>, - <0x00035200 0x200>, - <0x00035400 0x1dc>; - #phy-cells = <0>; + pciephy_0: phy@1000 { + reg = <0x1000 0x130>, + <0x1200 0x200>, + <0x1400 0x1dc>; - #clock-cells = <1>; - clock-output-names = "pcie_0_pipe_clk_src"; clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; clock-names = "pipe0"; resets = <&gcc GCC_PCIE_0_PHY_BCR>; reset-names = "lane0"; - }; - pciephy_1: phy@36000 { - reg = <0x00036000 0x130>, - <0x00036200 0x200>, - <0x00036400 0x1dc>; + #clock-cells = <0>; + clock-output-names = "pcie_0_pipe_clk_src"; + #phy-cells = <0>; + }; + + pciephy_1: phy@2000 { + reg = <0x2000 0x130>, + <0x2200 0x200>, + <0x2400 0x1dc>; - clock-output-names = "pcie_1_pipe_clk_src"; clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; clock-names = "pipe1"; resets = <&gcc GCC_PCIE_1_PHY_BCR>; reset-names = "lane1"; - }; - pciephy_2: phy@37000 { - reg = <0x00037000 0x130>, - <0x00037200 0x200>, - <0x00037400 0x1dc>; + #clock-cells = <0>; + clock-output-names = "pcie_1_pipe_clk_src"; + #phy-cells = <0>; + }; + + pciephy_2: phy@3000 { + reg = <0x3000 0x130>, + <0x3200 0x200>, + <0x3400 0x1dc>; - clock-output-names = "pcie_2_pipe_clk_src"; clocks = <&gcc GCC_PCIE_2_PIPE_CLK>; clock-names = "pipe2"; resets = <&gcc GCC_PCIE_2_PHY_BCR>; reset-names = "lane2"; + + #clock-cells = <0>; + clock-output-names = "pcie_2_pipe_clk_src"; + + #phy-cells = <0>; }; }; @@ -650,7 +662,7 @@ }; qfprom@74000 { - compatible = "qcom,qfprom"; + compatible = "qcom,msm8996-qfprom", "qcom,qfprom"; reg = <0x00074000 0x8ff>; #address-cells = <1>; #size-cells = <1>; @@ -687,8 +699,31 @@ clocks = <&rpmcc RPM_SMD_BB_CLK1>, <&rpmcc RPM_SMD_LN_BB_CLK>, - <&sleep_clk>; - clock-names = "cxo", "cxo2", "sleep_clk"; + <&sleep_clk>, + <&pciephy_0>, + <&pciephy_1>, + <&pciephy_2>, + <&ssusb_phy_0>, + <0>, <0>, <0>; + clock-names = "cxo", + "cxo2", + "sleep_clk", + "pcie_0_pipe_clk_src", + "pcie_1_pipe_clk_src", + "pcie_2_pipe_clk_src", + "usb3_phy_pipe_clk_src", + "ufs_rx_symbol_0_clk_src", + "ufs_rx_symbol_1_clk_src", + "ufs_tx_symbol_0_clk_src"; + }; + + bimc: interconnect@408000 { + compatible = "qcom,msm8996-bimc"; + reg = <0x00408000 0x5a000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_BIMC_CLK>, + <&rpmcc RPM_SMD_BIMC_A_CLK>; }; tsens0: thermal-sensor@4a9000 { @@ -735,6 +770,74 @@ dma-names = "rx", "tx"; }; + cnoc: interconnect@500000 { + compatible = "qcom,msm8996-cnoc"; + reg = <0x00500000 0x1000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_CNOC_CLK>, + <&rpmcc RPM_SMD_CNOC_A_CLK>; + }; + + snoc: interconnect@524000 { + compatible = "qcom,msm8996-snoc"; + reg = <0x00524000 0x1c000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_SNOC_CLK>, + <&rpmcc RPM_SMD_SNOC_A_CLK>; + }; + + a0noc: interconnect@543000 { + compatible = "qcom,msm8996-a0noc"; + reg = <0x00543000 0x6000>; + #interconnect-cells = <1>; + clock-names = "aggre0_snoc_axi", + "aggre0_cnoc_ahb", + "aggre0_noc_mpu_cfg"; + clocks = <&gcc GCC_AGGRE0_SNOC_AXI_CLK>, + <&gcc GCC_AGGRE0_CNOC_AHB_CLK>, + <&gcc GCC_AGGRE0_NOC_MPU_CFG_AHB_CLK>; + power-domains = <&gcc AGGRE0_NOC_GDSC>; + }; + + a1noc: interconnect@562000 { + compatible = "qcom,msm8996-a1noc"; + reg = <0x00562000 0x5000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_AGGR1_NOC_CLK>, + <&rpmcc RPM_SMD_AGGR1_NOC_A_CLK>; + }; + + a2noc: interconnect@583000 { + compatible = "qcom,msm8996-a2noc"; + reg = <0x00583000 0x7000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>, + <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>; + }; + + mnoc: interconnect@5a4000 { + compatible = "qcom,msm8996-mnoc"; + reg = <0x005a4000 0x1c000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a", "iface"; + clocks = <&rpmcc RPM_SMD_MMAXI_CLK>, + <&rpmcc RPM_SMD_MMAXI_A_CLK>, + <&mmcc AHB_CLK_SRC>; + }; + + pnoc: interconnect@5c0000 { + compatible = "qcom,msm8996-pnoc"; + reg = <0x005c0000 0x3000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_PCNOC_CLK>, + <&rpmcc RPM_SMD_PCNOC_A_CLK>; + }; + tcsr_mutex_regs: syscon@740000 { compatible = "syscon"; reg = <0x00740000 0x40000>; @@ -751,6 +854,22 @@ #reset-cells = <1>; #power-domain-cells = <1>; reg = <0x008c0000 0x40000>; + clocks = <&xo_board>, + <&gcc GCC_MMSS_NOC_CFG_AHB_CLK>, + <&gcc GPLL0>, + <&dsi0_phy 1>, + <&dsi0_phy 0>, + <0>, + <0>, + <0>; + clock-names = "xo", + "gcc_mmss_noc_cfg_ahb_clk", + "gpll0", + "dsi0pll", + "dsi0pllbyte", + "dsi1pll", + "dsi1pllbyte", + "hdmipll"; assigned-clocks = <&mmcc MMPLL9_PLL>, <&mmcc MMPLL1_PLL>, <&mmcc MMPLL3_PLL>, @@ -779,8 +898,9 @@ interrupt-controller; #interrupt-cells = <1>; - clocks = <&mmcc MDSS_AHB_CLK>; - clock-names = "iface"; + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_MDP_CLK>; + clock-names = "iface", "core"; #address-cells = <1>; #size-cells = <1>; @@ -814,6 +934,11 @@ assigned-clock-rates = <300000000>, <19200000>; + interconnects = <&mnoc MASTER_MDP_PORT0 &bimc SLAVE_EBI_CH0>, + <&mnoc MASTER_MDP_PORT1 &bimc SLAVE_EBI_CH0>, + <&mnoc MASTER_ROTATOR &bimc SLAVE_EBI_CH0>; + interconnect-names = "mdp0-mem", "mdp1-mem", "rotator-mem"; + ports { #address-cells = <1>; #size-cells = <0>; @@ -831,6 +956,13 @@ remote-endpoint = <&dsi0_in>; }; }; + + port@2 { + reg = <2>; + mdp5_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; }; }; @@ -856,6 +988,8 @@ "core_mmss", "pixel", "core"; + assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; phys = <&dsi0_phy>; phy-names = "dsi"; @@ -900,6 +1034,74 @@ status = "disabled"; }; + dsi1: dsi@996000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0x00996000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_BYTE1_CLK>, + <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MMSS_MISC_AHB_CLK>, + <&mmcc MDSS_PCLK1_CLK>, + <&mmcc MDSS_ESC1_CLK>; + clock-names = "mdp_core", + "byte", + "iface", + "bus", + "core_mmss", + "pixel", + "core"; + assigned-clocks = <&mmcc BYTE1_CLK_SRC>, <&mmcc PCLK1_CLK_SRC>; + assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>; + + phys = <&dsi1_phy>; + phy-names = "dsi"; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi1_in: endpoint { + remote-endpoint = <&mdp5_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + dsi1_out: endpoint { + }; + }; + }; + }; + + dsi1_phy: dsi-phy@996400 { + compatible = "qcom,dsi-phy-14nm"; + reg = <0x00996400 0x100>, + <0x00996500 0x300>, + <0x00996800 0x188>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_BB_CLK1>; + clock-names = "iface", "ref"; + status = "disabled"; + }; + hdmi: hdmi-tx@9a0000 { compatible = "qcom,hdmi-tx-8996"; reg = <0x009a0000 0x50c>, @@ -925,7 +1127,6 @@ "extp"; phys = <&hdmi_phy>; - phy-names = "hdmi_phy"; #sound-dai-cells = <1>; status = "disabled"; @@ -988,6 +1189,9 @@ "mem", "mem_iface"; + interconnects = <&bimc MASTER_GRAPHICS_3D &bimc SLAVE_EBI_CH0>; + interconnect-names = "gfx-mem"; + power-domains = <&mmcc GPU_GX_GDSC>; iommus = <&adreno_smmu 0>; @@ -1001,7 +1205,7 @@ #cooling-cells = <2>; gpu_opp_table: opp-table { - compatible ="operating-points-v2"; + compatible = "operating-points-v2"; /* * 624Mhz and 560Mhz are only available on speed @@ -1623,7 +1827,7 @@ <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, <&gcc GCC_PCIE_0_SLV_AXI_CLK>; - clock-names = "pipe", + clock-names = "pipe", "aux", "cfg", "bus_master", @@ -1637,7 +1841,7 @@ bus-range = <0x00 0xff>; num-lanes = <1>; - status = "disabled"; + status = "disabled"; reg = <0x00608000 0x2000>, <0x0d000000 0xf1d>, @@ -1677,7 +1881,7 @@ <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, <&gcc GCC_PCIE_1_SLV_AXI_CLK>; - clock-names = "pipe", + clock-names = "pipe", "aux", "cfg", "bus_master", @@ -1727,7 +1931,7 @@ <&gcc GCC_PCIE_2_MSTR_AXI_CLK>, <&gcc GCC_PCIE_2_SLV_AXI_CLK>; - clock-names = "pipe", + clock-names = "pipe", "aux", "cfg", "bus_master", @@ -2013,6 +2217,9 @@ <&mmcc VIDEO_AXI_CLK>, <&mmcc VIDEO_MAXI_CLK>; clock-names = "core", "iface", "bus", "mbus"; + interconnects = <&mnoc MASTER_VIDEO_P0 &bimc SLAVE_EBI_CH0>, + <&bimc MASTER_AMPSS_M0 &mnoc SLAVE_VENUS_CFG>; + interconnect-names = "video-mem", "cpu-cfg"; iommus = <&venus_smmu 0x00>, <&venus_smmu 0x01>, <&venus_smmu 0x0a>, @@ -2732,6 +2939,10 @@ <&gcc GCC_USB30_MASTER_CLK>; assigned-clock-rates = <19200000>, <120000000>; + interconnects = <&a2noc MASTER_USB3 &bimc SLAVE_EBI_CH0>, + <&bimc MASTER_AMPSS_M0 &snoc SLAVE_USB3>; + interconnect-names = "usb-ddr", "apps-usb"; + power-domains = <&gcc USB30_GDSC>; status = "disabled"; @@ -2769,7 +2980,7 @@ <0x07410600 0x1a8>; #phy-cells = <0>; - #clock-cells = <1>; + #clock-cells = <0>; clock-output-names = "usb3_phy_pipe_clk_src"; clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>; clock-names = "pipe0"; @@ -2804,7 +3015,7 @@ status = "disabled"; }; - sdhc1: sdhci@7464900 { + sdhc1: mmc@7464900 { compatible = "qcom,msm8996-sdhci", "qcom,sdhci-msm-v4"; reg = <0x07464900 0x11c>, <0x07464000 0x800>; reg-names = "hc_mem", "core_mem"; @@ -2817,6 +3028,7 @@ clocks = <&gcc GCC_SDCC1_AHB_CLK>, <&gcc GCC_SDCC1_APPS_CLK>, <&rpmcc RPM_SMD_BB_CLK1>; + resets = <&gcc GCC_SDCC1_BCR>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&sdc1_state_on>; @@ -2827,7 +3039,7 @@ status = "disabled"; }; - sdhc2: sdhci@74a4900 { + sdhc2: mmc@74a4900 { compatible = "qcom,msm8996-sdhci", "qcom,sdhci-msm-v4"; reg = <0x074a4900 0x314>, <0x074a4000 0x800>; reg-names = "hc_mem", "core_mem"; @@ -2840,6 +3052,7 @@ clocks = <&gcc GCC_SDCC2_AHB_CLK>, <&gcc GCC_SDCC2_APPS_CLK>, <&rpmcc RPM_SMD_BB_CLK1>; + resets = <&gcc GCC_SDCC2_BCR>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&sdc2_state_on>; @@ -3084,7 +3297,7 @@ compatible = "qcom,bam-v1.7.0"; qcom,controlled-remotely; reg = <0x09184000 0x32000>; - num-channels = <31>; + num-channels = <31>; interrupts = <0 164 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; qcom,ee = <1>; @@ -3096,7 +3309,7 @@ reg = <0x091c0000 0x2C000>; reg-names = "ctrl"; interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&slimbam 3>, <&slimbam 4>, + dmas = <&slimbam 3>, <&slimbam 4>, <&slimbam 5>, <&slimbam 6>; dma-names = "rx", "tx", "tx2", "rx2"; #address-cells = <1>; @@ -3108,7 +3321,7 @@ tasha_ifd: tas-ifd { compatible = "slim217,1a0"; - reg = <0 0>; + reg = <0 0>; }; wcd9335: codec@1{ @@ -3116,17 +3329,17 @@ pinctrl-names = "default"; compatible = "slim217,1a0"; - reg = <1 0>; + reg = <1 0>; interrupt-parent = <&tlmm>; interrupts = <54 IRQ_TYPE_LEVEL_HIGH>, <53 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "intr1", "intr2"; + interrupt-names = "intr1", "intr2"; interrupt-controller; #interrupt-cells = <1>; reset-gpios = <&tlmm 64 0>; - slim-ifc-dev = <&tasha_ifd>; + slim-ifc-dev = <&tasha_ifd>; #sound-dai-cells = <1>; }; diff --git a/dts/src/arm64/qcom/msm8998-asus-novago-tp370ql.dts b/dts/src/arm64/qcom/msm8998-asus-novago-tp370ql.dts index e204b70504..102f3e9a79 100644 --- a/dts/src/arm64/qcom/msm8998-asus-novago-tp370ql.dts +++ b/dts/src/arm64/qcom/msm8998-asus-novago-tp370ql.dts @@ -16,20 +16,22 @@ touchpad@15 { compatible = "hid-over-i2c"; - interrupt-parent = <&tlmm>; - interrupts = <0x7b IRQ_TYPE_LEVEL_LOW>; reg = <0x15>; - hid-descr-addr = <0x0001>; - pinctrl-names = "default"; pinctrl-0 = <&touchpad>; + + interrupt-parent = <&tlmm>; + interrupts = <123 IRQ_TYPE_LEVEL_LOW>; + + hid-descr-addr = <0x0001>; }; keyboard@3a { compatible = "hid-over-i2c"; - interrupt-parent = <&tlmm>; - interrupts = <0x25 IRQ_TYPE_LEVEL_LOW>; reg = <0x3a>; + interrupt-parent = <&tlmm>; + interrupts = <37 IRQ_TYPE_LEVEL_LOW>; + hid-descr-addr = <0x0001>; }; }; @@ -37,12 +39,3 @@ &sdhc2 { cd-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>; }; - -&tlmm { - touchpad: touchpad { - config { - pins = "gpio123"; - bias-pull-up; - }; - }; -}; diff --git a/dts/src/arm64/qcom/msm8998-clamshell.dtsi b/dts/src/arm64/qcom/msm8998-clamshell.dtsi index b3b352530d..7928b81974 100644 --- a/dts/src/arm64/qcom/msm8998-clamshell.dtsi +++ b/dts/src/arm64/qcom/msm8998-clamshell.dtsi @@ -8,13 +8,10 @@ */ #include "msm8998.dtsi" -#include "pm8998.dtsi" #include "pm8005.dtsi" +#include "pm8998.dtsi" / { - chosen { - }; - vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; @@ -37,6 +34,28 @@ }; }; +&blsp1_uart3_on { + rx { + /delete-property/ bias-disable; + /* + * Configure a pull-up on 45 (RX). This is needed to + * avoid garbage data when the TX pin of the Bluetooth + * module is in tri-state (module powered off or not + * driving the signal yet). + */ + bias-pull-up; + }; + + cts { + /delete-property/ bias-disable; + /* + * Configure a pull-down on 47 (CTS) to match the pull + * of the Bluetooth module. + */ + bias-pull-down; + }; +}; + /* * The laptop FW does not appear to support the retention state as it is * not advertised as enabled in ACPI, and enabling it in DT can cause boot @@ -74,6 +93,20 @@ cpu-idle-states = <&BIG_CPU_SLEEP_1>; }; +/* + * If EFIFB is used, enabling MMCC will cause important MMSS clocks to be cleaned + * up, because as far as Linux is concerned - they are unused. Disable it by default + * on clamshell devices, as it will break them, unless either simplefb is configured to + * hold a vote for these clocks, or panels are brought up properly, using drm/msm. + */ +&mmcc { + status = "disabled"; +}; + +&mmss_smmu { + status = "disabled"; +}; + &pcie0 { status = "okay"; }; @@ -82,20 +115,16 @@ status = "okay"; }; -&pm8005_lsid1 { - pm8005-regulators { - compatible = "qcom,pm8005-regulators"; +&pm8005_regulators { + vdd_s1-supply = <&vph_pwr>; - vdd_s1-supply = <&vph_pwr>; + pm8005_s1: s1 { /* VDD_GFX supply */ + regulator-min-microvolt = <524000>; + regulator-max-microvolt = <1100000>; + regulator-enable-ramp-delay = <500>; - pm8005_s1: s1 { /* VDD_GFX supply */ - regulator-min-microvolt = <524000>; - regulator-max-microvolt = <1100000>; - regulator-enable-ramp-delay = <500>; - - /* hack until we rig up the gpu consumer */ - regulator-always-on; - }; + /* hack until we rig up the gpu consumer */ + regulator-always-on; }; }; @@ -143,127 +172,156 @@ regulator-min-microvolt = <1352000>; regulator-max-microvolt = <1352000>; }; + vreg_s4a_1p8: s4 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-allow-set-load; }; + vreg_s5a_2p04: s5 { regulator-min-microvolt = <1904000>; regulator-max-microvolt = <2040000>; }; + vreg_s7a_1p025: s7 { regulator-min-microvolt = <900000>; regulator-max-microvolt = <1028000>; }; + vreg_l1a_0p875: l1 { regulator-min-microvolt = <880000>; regulator-max-microvolt = <880000>; regulator-allow-set-load; }; + vreg_l2a_1p2: l2 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-allow-set-load; }; + vreg_l3a_1p0: l3 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; }; + vreg_l5a_0p8: l5 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <800000>; }; + vreg_l6a_1p8: l6 { regulator-min-microvolt = <1808000>; regulator-max-microvolt = <1808000>; }; + vreg_l7a_1p8: l7 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-allow-set-load; }; + vreg_l8a_1p2: l8 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; + vreg_l9a_1p8: l9 { regulator-min-microvolt = <1808000>; regulator-max-microvolt = <2960000>; }; + vreg_l10a_1p8: l10 { regulator-min-microvolt = <1808000>; regulator-max-microvolt = <2960000>; }; + vreg_l11a_1p0: l11 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; }; + vreg_l12a_1p8: l12 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; + vreg_l13a_2p95: l13 { regulator-min-microvolt = <1808000>; regulator-max-microvolt = <2960000>; }; + vreg_l14a_1p88: l14 { regulator-min-microvolt = <1880000>; regulator-max-microvolt = <1880000>; }; + vreg_l15a_1p8: l15 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; + vreg_l16a_2p7: l16 { regulator-min-microvolt = <2704000>; regulator-max-microvolt = <2704000>; }; + vreg_l17a_1p3: l17 { regulator-min-microvolt = <1304000>; regulator-max-microvolt = <1304000>; regulator-allow-set-load; }; + vreg_l18a_2p7: l18 { regulator-min-microvolt = <2704000>; regulator-max-microvolt = <2704000>; }; + vreg_l19a_3p0: l19 { regulator-min-microvolt = <3008000>; regulator-max-microvolt = <3008000>; }; + vreg_l20a_2p95: l20 { regulator-min-microvolt = <2960000>; regulator-max-microvolt = <2960000>; regulator-allow-set-load; }; + vreg_l21a_2p95: l21 { regulator-min-microvolt = <2960000>; regulator-max-microvolt = <2960000>; regulator-allow-set-load; regulator-system-load = <800000>; }; + vreg_l22a_2p85: l22 { regulator-min-microvolt = <2864000>; regulator-max-microvolt = <2864000>; }; + vreg_l23a_3p3: l23 { regulator-min-microvolt = <3312000>; regulator-max-microvolt = <3312000>; }; + vreg_l24a_3p075: l24 { regulator-min-microvolt = <3088000>; regulator-max-microvolt = <3088000>; }; + vreg_l25a_3p3: l25 { regulator-min-microvolt = <3104000>; regulator-max-microvolt = <3312000>; regulator-allow-set-load; }; + vreg_l26a_1p2: l26 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; + vreg_l28_3p0: l28 { regulator-min-microvolt = <3008000>; regulator-max-microvolt = <3008000>; @@ -278,7 +336,6 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - }; }; @@ -286,17 +343,6 @@ status = "okay"; }; -&tlmm { - gpio-reserved-ranges = <0 4>, <81 4>; - - touchpad: touchpad { - config { - pins = "gpio123"; - bias-pull-up; /* pull up */ - }; - }; -}; - &sdhc2 { status = "okay"; @@ -304,8 +350,17 @@ vqmmc-supply = <&vreg_l13a_2p95>; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + pinctrl-0 = <&sdc2_on &sdc2_cd>; + pinctrl-1 = <&sdc2_off &sdc2_cd>; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <81 4>; + + touchpad: touchpad-pin { + pins = "gpio123"; + bias-pull-up; + }; }; &ufshc { @@ -341,26 +396,3 @@ vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; }; - -/* PINCTRL - board-specific pinctrl */ -&blsp1_uart3_on { - rx { - /delete-property/ bias-disable; - /* - * Configure a pull-up on 45 (RX). This is needed to - * avoid garbage data when the TX pin of the Bluetooth - * module is in tri-state (module powered off or not - * driving the signal yet). - */ - bias-pull-up; - }; - - cts { - /delete-property/ bias-disable; - /* - * Configure a pull-down on 47 (CTS) to match the pull - * of the Bluetooth module. - */ - bias-pull-down; - }; -}; diff --git a/dts/src/arm64/qcom/msm8998-fxtec-pro1.dts b/dts/src/arm64/qcom/msm8998-fxtec-pro1.dts index dc5b9b274d..429ba57e20 100644 --- a/dts/src/arm64/qcom/msm8998-fxtec-pro1.dts +++ b/dts/src/arm64/qcom/msm8998-fxtec-pro1.dts @@ -6,11 +6,13 @@ /dts-v1/; -#include "msm8998-mtp.dtsi" - #include <dt-bindings/input/input.h> #include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include "msm8998.dtsi" +#include "pm8005.dtsi" +#include "pm8998.dtsi" +#include "pmi8998.dtsi" / { model = "F(x)tec Pro1 (QX1000)"; @@ -18,6 +20,11 @@ chassis-type = "handset"; qcom,board-id = <0x02000b 0x10>; + aliases { + serial0 = &blsp2_uart1; + serial1 = &blsp1_uart3; + }; + /* * Until we hook up type-c detection, we * have to stick with this. But it works. @@ -33,7 +40,7 @@ pinctrl-names = "default"; pinctrl-0 = <&hall_sensor1_default>; - hall-sensor1 { + event-hall-sensor1 { label = "Keyboard Hall Sensor"; gpios = <&tlmm 124 GPIO_ACTIVE_HIGH>; debounce-interval = <15>; @@ -49,7 +56,7 @@ pinctrl-names = "default"; pinctrl-0 = <&gpio_kb_pins_extra>; - home { + key-home { label = "Home"; gpios = <&tlmm 21 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOMEPAGE>; @@ -57,7 +64,7 @@ linux,can-disable; }; - super-l { + key-super-l { label = "Super Left"; gpios = <&tlmm 32 GPIO_ACTIVE_LOW>; linux,code = <KEY_FN>; @@ -65,7 +72,7 @@ linux,can-disable; }; - super-r { + key-super-r { label = "Super Right"; gpios = <&tlmm 33 GPIO_ACTIVE_LOW>; linux,code = <KEY_FN>; @@ -73,7 +80,7 @@ linux,can-disable; }; - shift { + key-shift { label = "Shift"; gpios = <&tlmm 114 GPIO_ACTIVE_LOW>; linux,code = <KEY_RIGHTSHIFT>; @@ -81,7 +88,7 @@ linux,can-disable; }; - ctrl { + key-ctrl { label = "Ctrl"; gpios = <&tlmm 128 GPIO_ACTIVE_LOW>; linux,code = <KEY_LEFTCTRL>; @@ -89,7 +96,7 @@ linux,can-disable; }; - alt { + key-alt { label = "Alt"; gpios = <&tlmm 129 GPIO_ACTIVE_LOW>; linux,code = <KEY_LEFTALT>; @@ -101,12 +108,10 @@ gpio-keys { compatible = "gpio-keys"; label = "Side buttons"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&vol_up_pin_a>, <&cam_focus_pin_a>, <&cam_snapshot_pin_a>; - vol-up { + button-vol-up { label = "Volume Up"; gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; @@ -115,7 +120,7 @@ debounce-interval = <15>; }; - camera-snapshot { + button-camera-snapshot { label = "Camera Snapshot"; gpios = <&pm8998_gpio 7 GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; @@ -123,7 +128,7 @@ debounce-interval = <15>; }; - camera-focus { + button-camera-focus { label = "Camera Focus"; gpios = <&pm8998_gpio 8 GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; @@ -135,7 +140,7 @@ keyboard-leds { compatible = "gpio-leds"; - backlight { + led-0 { color = <LED_COLOR_ID_WHITE>; default-state = "off"; function = LED_FUNCTION_KBD_BACKLIGHT; @@ -144,7 +149,7 @@ retain-state-suspended; }; - caps-lock { + led-1 { color = <LED_COLOR_ID_YELLOW>; default-state = "off"; function = LED_FUNCTION_CAPSLOCK; @@ -187,10 +192,57 @@ pinctrl-0 = <&ts_vio_default>; regulator-always-on; }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + }; +}; + +&blsp1_uart3 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + max-speed = <3200000>; + }; +}; + +&blsp1_uart3_on { + rx { + /delete-property/ bias-disable; + /* + * Configure a pull-up on 45 (RX). This is needed to + * avoid garbage data when the TX pin of the Bluetooth + * module is in tri-state (module powered off or not + * driving the signal yet). + */ + bias-pull-up; + }; + + cts { + /delete-property/ bias-disable; + /* + * Configure a pull-down on 47 (CTS) to match the pull + * of the Bluetooth module. + */ + bias-pull-down; + }; +}; + +&blsp2_uart1 { + status = "okay"; }; &blsp2_i2c1 { - status = "ok"; + status = "okay"; touchscreen@14 { compatible = "goodix,gt9286"; @@ -205,16 +257,93 @@ }; }; -&mmcc { - status = "ok"; +&etf { + status = "okay"; +}; + +&etm1 { + status = "okay"; +}; + +&etm2 { + status = "okay"; +}; + +&etm3 { + status = "okay"; +}; + +&etm4 { + status = "okay"; +}; + +&etm5 { + status = "okay"; +}; + +&etm6 { + status = "okay"; +}; + +&etm7 { + status = "okay"; +}; + +&etm8 { + status = "okay"; +}; + +&etr { + status = "okay"; }; -&mmss_smmu { - status = "ok"; +&funnel1 { + status = "okay"; +}; + +&funnel2 { + status = "okay"; +}; + +&funnel3 { + status = "okay"; +}; + +&funnel4 { + // FIXME: Figure out why clock late_initcall crashes the board with + // this enabled. + // status = "okay"; +}; + +&funnel5 { + // FIXME: Figure out why clock late_initcall crashes the board with + // this enabled. + // status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie_phy { + status = "okay"; +}; + +&pm8005_regulators { + vdd_s1-supply = <&vph_pwr>; + + pm8005_s1: s1 { /* VDD_GFX supply */ + regulator-min-microvolt = <524000>; + regulator-max-microvolt = <1100000>; + regulator-enable-ramp-delay = <500>; + + /* Hack until we rig up the gpu consumer */ + regulator-always-on; + }; }; &pm8998_gpio { - vol_up_pin_a: vol-up-active { + vol_up_pin_a: vol-up-active-state { pins = "gpio6"; function = "normal"; bias-pull-up; @@ -222,7 +351,7 @@ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; }; - cam_focus_pin_a: cam-focus-btn-active { + cam_focus_pin_a: cam-focus-btn-active-state { pins = "gpio7"; function = "normal"; bias-pull-up; @@ -230,7 +359,7 @@ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; }; - cam_snapshot_pin_a: cam-snapshot-btn-active { + cam_snapshot_pin_a: cam-snapshot-btn-active-state { pins = "gpio8"; function = "normal"; bias-pull-up; @@ -249,6 +378,240 @@ }; }; +&qusb2phy { + status = "okay"; + + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; +}; + +&replicator1 { + status = "okay"; +}; + +&rpm_requests { + pm8998-regulators { + compatible = "qcom,rpm-pm8998-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_s8-supply = <&vph_pwr>; + vdd_s9-supply = <&vph_pwr>; + vdd_s10-supply = <&vph_pwr>; + vdd_s11-supply = <&vph_pwr>; + vdd_s12-supply = <&vph_pwr>; + vdd_s13-supply = <&vph_pwr>; + vdd_l1_l27-supply = <&vreg_s7a_1p025>; + vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>; + vdd_l3_l11-supply = <&vreg_s7a_1p025>; + vdd_l4_l5-supply = <&vreg_s7a_1p025>; + vdd_l6-supply = <&vreg_s5a_2p04>; + vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>; + vdd_l9-supply = <&vreg_bob>; + vdd_l10_l23_l25-supply = <&vreg_bob>; + vdd_l13_l19_l21-supply = <&vreg_bob>; + vdd_l16_l28-supply = <&vreg_bob>; + vdd_l18_l22-supply = <&vreg_bob>; + vdd_l20_l24-supply = <&vreg_bob>; + vdd_l26-supply = <&vreg_s3a_1p35>; + vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p35: s3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_s4a_1p8: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + }; + + vreg_s5a_2p04: s5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7a_1p025: s7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + + vreg_l1a_0p875: l1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + }; + + vreg_l2a_1p2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l3a_1p0: l3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_l5a_0p8: l5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + vreg_l6a_1p8: l6 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <1808000>; + }; + + vreg_l7a_1p8: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l8a_1p2: l8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l9a_1p8: l9 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + + vreg_l10a_1p8: l10 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + + vreg_l11a_1p0: l11 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_l12a_1p8: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l13a_2p95: l13 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + + vreg_l14a_1p88: l14 { + regulator-min-microvolt = <1880000>; + regulator-max-microvolt = <1880000>; + }; + + vreg_l15a_1p8: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l16a_2p7: l16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + }; + + vreg_l17a_1p3: l17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + }; + + vreg_l18a_2p7: l18 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + }; + + vreg_l19a_3p0: l19 { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + }; + + vreg_l20a_2p95: l20 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-allow-set-load; + }; + + vreg_l21a_2p95: l21 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-system-load = <800000>; + regulator-allow-set-load; + }; + + vreg_l22a_2p85: l22 { + regulator-min-microvolt = <2864000>; + regulator-max-microvolt = <2864000>; + }; + + vreg_l23a_3p3: l23 { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3312000>; + }; + + vreg_l24a_3p075: l24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + }; + + vreg_l25a_3p3: l25 { + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3312000>; + }; + + vreg_l26a_1p2: l26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-allow-set-load; + }; + + vreg_l28_3p0: l28 { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + }; + + vreg_lvs1a_1p8: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + }; + + pmi8998-regulators { + compatible = "qcom,rpm-pmi8998-regulators"; + + vdd_bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3600000>; + }; + }; +}; + +&remoteproc_adsp { + status = "okay"; +}; + +&remoteproc_mss { + status = "okay"; +}; + +&remoteproc_slpi { + status = "okay"; +}; + &tlmm { gpio-reserved-ranges = <0 4>; @@ -297,12 +660,41 @@ }; }; +&sdhc2 { + status = "okay"; + cd-gpios = <&tlmm 95 GPIO_ACTIVE_LOW>; + + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vreg_l13a_2p95>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on &sdc2_cd>; + pinctrl-1 = <&sdc2_off &sdc2_cd>; +}; + +&stm { + status = "okay"; +}; + &ufshc { - status = "ok"; + status = "okay"; + vcc-supply = <&vreg_l20a_2p95>; + vccq-supply = <&vreg_l26a_1p2>; + vccq2-supply = <&vreg_s4a_1p8>; + vcc-max-microamp = <750000>; + vccq-max-microamp = <560000>; + vccq2-max-microamp = <750000>; }; &ufsphy { - status = "ok"; + status = "okay"; + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l2a_1p2>; + vddp-ref-clk-supply = <&vreg_l26a_1p2>; +}; + +&usb3 { + status = "okay"; }; &usb3_dwc3 { @@ -310,8 +702,24 @@ extcon = <&extcon_usb>; }; +&usb3phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l2a_1p2>; +}; + /* GT9286 analog supply */ &vreg_l28_3p0 { regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; }; + +&wifi { + status = "okay"; + + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; +}; diff --git a/dts/src/arm64/qcom/msm8998-hp-envy-x2.dts b/dts/src/arm64/qcom/msm8998-hp-envy-x2.dts index 1eb406b43f..38389c6a3f 100644 --- a/dts/src/arm64/qcom/msm8998-hp-envy-x2.dts +++ b/dts/src/arm64/qcom/msm8998-hp-envy-x2.dts @@ -16,13 +16,14 @@ keyboard@3a { compatible = "hid-over-i2c"; - interrupt-parent = <&tlmm>; - interrupts = <0x79 IRQ_TYPE_LEVEL_LOW>; reg = <0x3a>; - hid-descr-addr = <0x0001>; - pinctrl-names = "default"; pinctrl-0 = <&touchpad>; + + interrupt-parent = <&tlmm>; + interrupts = <121 IRQ_TYPE_LEVEL_LOW>; + + hid-descr-addr = <0x0001>; }; }; diff --git a/dts/src/arm64/qcom/msm8998-lenovo-miix-630.dts b/dts/src/arm64/qcom/msm8998-lenovo-miix-630.dts index f55f6f3e3e..cf81c33a9d 100644 --- a/dts/src/arm64/qcom/msm8998-lenovo-miix-630.dts +++ b/dts/src/arm64/qcom/msm8998-lenovo-miix-630.dts @@ -16,13 +16,14 @@ keyboard@3a { compatible = "hid-over-i2c"; - interrupt-parent = <&tlmm>; - interrupts = <0x79 IRQ_TYPE_LEVEL_LOW>; reg = <0x3a>; - hid-descr-addr = <0x0001>; - pinctrl-names = "default"; pinctrl-0 = <&touchpad>; + + interrupt-parent = <&tlmm>; + interrupts = <121 IRQ_TYPE_LEVEL_LOW>; + + hid-descr-addr = <0x0001>; }; }; diff --git a/dts/src/arm64/qcom/msm8998-mtp.dts b/dts/src/arm64/qcom/msm8998-mtp.dts index 66540d2ca1..a3ca58100a 100644 --- a/dts/src/arm64/qcom/msm8998-mtp.dts +++ b/dts/src/arm64/qcom/msm8998-mtp.dts @@ -3,11 +3,450 @@ /dts-v1/; -#include "msm8998-mtp.dtsi" +#include "msm8998.dtsi" +#include "pm8005.dtsi" +#include "pm8998.dtsi" +#include "pmi8998.dtsi" / { model = "Qualcomm Technologies, Inc. MSM8998 v1 MTP"; - compatible = "qcom,msm8998-mtp"; + compatible = "qcom,msm8998-mtp", "qcom,msm8998"; qcom,board-id = <8 0>; + + aliases { + serial0 = &blsp2_uart1; + serial1 = &blsp1_uart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + }; +}; + +&blsp1_uart3 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + max-speed = <3200000>; + }; +}; + +&blsp1_uart3_on { + rx { + /delete-property/ bias-disable; + /* + * Configure a pull-up on 45 (RX). This is needed to + * avoid garbage data when the TX pin of the Bluetooth + * module is in tri-state (module powered off or not + * driving the signal yet). + */ + bias-pull-up; + }; + + cts { + /delete-property/ bias-disable; + /* + * Configure a pull-down on 47 (CTS) to match the pull + * of the Bluetooth module. + */ + bias-pull-down; + }; +}; + +&blsp2_uart1 { + status = "okay"; +}; + +&etf { + status = "okay"; +}; + +&etm1 { + status = "okay"; +}; + +&etm2 { + status = "okay"; +}; + +&etm3 { + status = "okay"; +}; + +&etm4 { + status = "okay"; +}; + +&etm5 { + status = "okay"; +}; + +&etm6 { + status = "okay"; +}; + +&etm7 { + status = "okay"; +}; + +&etm8 { + status = "okay"; +}; + +&etr { + status = "okay"; +}; + +&funnel1 { + status = "okay"; +}; + +&funnel2 { + status = "okay"; +}; + +&funnel3 { + status = "okay"; +}; + +&funnel4 { + // FIXME: Figure out why clock late_initcall crashes the board with + // this enabled. + // status = "okay"; +}; + +&funnel5 { + // FIXME: Figure out why clock late_initcall crashes the board with + // this enabled. + // status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie_phy { + status = "okay"; +}; + +&pm8005_regulators { + vdd_s1-supply = <&vph_pwr>; + + pm8005_s1: s1 { /* VDD_GFX supply */ + regulator-min-microvolt = <524000>; + regulator-max-microvolt = <1100000>; + regulator-enable-ramp-delay = <500>; + + /* Hack until we rig up the gpu consumer */ + regulator-always-on; + }; +}; + +&qusb2phy { + status = "okay"; + + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; +}; + +&replicator1 { + status = "okay"; +}; + +&rpm_requests { + pm8998-regulators { + compatible = "qcom,rpm-pm8998-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_s8-supply = <&vph_pwr>; + vdd_s9-supply = <&vph_pwr>; + vdd_s10-supply = <&vph_pwr>; + vdd_s11-supply = <&vph_pwr>; + vdd_s12-supply = <&vph_pwr>; + vdd_s13-supply = <&vph_pwr>; + vdd_l1_l27-supply = <&vreg_s7a_1p025>; + vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>; + vdd_l3_l11-supply = <&vreg_s7a_1p025>; + vdd_l4_l5-supply = <&vreg_s7a_1p025>; + vdd_l6-supply = <&vreg_s5a_2p04>; + vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>; + vdd_l9-supply = <&vreg_bob>; + vdd_l10_l23_l25-supply = <&vreg_bob>; + vdd_l13_l19_l21-supply = <&vreg_bob>; + vdd_l16_l28-supply = <&vreg_bob>; + vdd_l18_l22-supply = <&vreg_bob>; + vdd_l20_l24-supply = <&vreg_bob>; + vdd_l26-supply = <&vreg_s3a_1p35>; + vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p35: s3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_s4a_1p8: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + }; + + vreg_s5a_2p04: s5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7a_1p025: s7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + + vreg_l1a_0p875: l1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + }; + + vreg_l2a_1p2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l3a_1p0: l3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_l5a_0p8: l5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + vreg_l6a_1p8: l6 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <1808000>; + }; + + vreg_l7a_1p8: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l8a_1p2: l8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l9a_1p8: l9 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + + vreg_l10a_1p8: l10 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + + vreg_l11a_1p0: l11 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_l12a_1p8: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l13a_2p95: l13 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + + vreg_l14a_1p88: l14 { + regulator-min-microvolt = <1880000>; + regulator-max-microvolt = <1880000>; + }; + + vreg_l15a_1p8: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l16a_2p7: l16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + }; + + vreg_l17a_1p3: l17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + }; + + vreg_l18a_2p7: l18 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + }; + + vreg_l19a_3p0: l19 { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + }; + + vreg_l20a_2p95: l20 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-allow-set-load; + }; + + vreg_l21a_2p95: l21 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-system-load = <800000>; + regulator-allow-set-load; + }; + + vreg_l22a_2p85: l22 { + regulator-min-microvolt = <2864000>; + regulator-max-microvolt = <2864000>; + }; + + vreg_l23a_3p3: l23 { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3312000>; + }; + + vreg_l24a_3p075: l24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + }; + + vreg_l25a_3p3: l25 { + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3312000>; + }; + + vreg_l26a_1p2: l26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-allow-set-load; + }; + + vreg_l28_3p0: l28 { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + }; + + vreg_lvs1a_1p8: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + }; + + pmi8998-regulators { + compatible = "qcom,rpm-pmi8998-regulators"; + + vdd_bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3600000>; + }; + }; +}; + +&remoteproc_adsp { + status = "okay"; +}; + +&remoteproc_mss { + status = "okay"; +}; + +&remoteproc_slpi { + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <81 4>; +}; + +&sdhc2 { + status = "okay"; + cd-gpios = <&tlmm 95 GPIO_ACTIVE_LOW>; + + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vreg_l13a_2p95>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on &sdc2_cd>; + pinctrl-1 = <&sdc2_off &sdc2_cd>; +}; + +&stm { + status = "okay"; +}; + +&ufshc { + status = "okay"; + vcc-supply = <&vreg_l20a_2p95>; + vccq-supply = <&vreg_l26a_1p2>; + vccq2-supply = <&vreg_s4a_1p8>; + vcc-max-microamp = <750000>; + vccq-max-microamp = <560000>; + vccq2-max-microamp = <750000>; +}; + +&ufsphy { + status = "okay"; + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l2a_1p2>; + vddp-ref-clk-supply = <&vreg_l26a_1p2>; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + dr_mode = "host"; /* Force to host until we have Type-C hooked up */ +}; + +&usb3phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l2a_1p2>; +}; + +&wifi { + status = "okay"; + + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; }; diff --git a/dts/src/arm64/qcom/msm8998-mtp.dtsi b/dts/src/arm64/qcom/msm8998-mtp.dtsi deleted file mode 100644 index af67c641df..0000000000 --- a/dts/src/arm64/qcom/msm8998-mtp.dtsi +++ /dev/null @@ -1,421 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* Copyright (c) 2016, The Linux Foundation. All rights reserved. */ - -#include "msm8998.dtsi" -#include "pm8998.dtsi" -#include "pmi8998.dtsi" -#include "pm8005.dtsi" - -/ { - aliases { - serial0 = &blsp2_uart1; - serial1 = &blsp1_uart3; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - vph_pwr: vph-pwr-regulator { - compatible = "regulator-fixed"; - regulator-name = "vph_pwr"; - regulator-always-on; - regulator-boot-on; - }; -}; - -&blsp1_uart3 { - status = "okay"; - - bluetooth { - compatible = "qcom,wcn3990-bt"; - - vddio-supply = <&vreg_s4a_1p8>; - vddxo-supply = <&vreg_l7a_1p8>; - vddrf-supply = <&vreg_l17a_1p3>; - vddch0-supply = <&vreg_l25a_3p3>; - max-speed = <3200000>; - }; -}; - -&blsp2_uart1 { - status = "okay"; -}; - -&etf { - status = "okay"; -}; - -&etm1 { - status = "okay"; -}; - -&etm2 { - status = "okay"; -}; - -&etm3 { - status = "okay"; -}; - -&etm4 { - status = "okay"; -}; - -&etm5 { - status = "okay"; -}; - -&etm6 { - status = "okay"; -}; - -&etm7 { - status = "okay"; -}; - -&etm8 { - status = "okay"; -}; - -&etr { - status = "okay"; -}; - -&funnel1 { - status = "okay"; -}; - -&funnel2 { - status = "okay"; -}; - -&funnel3 { - status = "okay"; -}; - -&funnel4 { - // FIXME: Figure out why clock late_initcall crashes the board with - // this enabled. - // status = "okay"; -}; - -&funnel5 { - // FIXME: Figure out why clock late_initcall crashes the board with - // this enabled. - // status = "okay"; -}; - -&pcie0 { - status = "okay"; -}; - -&pcie_phy { - status = "okay"; -}; - -&pm8005_lsid1 { - pm8005-regulators { - compatible = "qcom,pm8005-regulators"; - - vdd_s1-supply = <&vph_pwr>; - - pm8005_s1: s1 { /* VDD_GFX supply */ - regulator-min-microvolt = <524000>; - regulator-max-microvolt = <1100000>; - regulator-enable-ramp-delay = <500>; - - /* hack until we rig up the gpu consumer */ - regulator-always-on; - }; - }; -}; - -&qusb2phy { - status = "okay"; - - vdda-pll-supply = <&vreg_l12a_1p8>; - vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; -}; - -&replicator1 { - status = "okay"; -}; - -&rpm_requests { - pm8998-regulators { - compatible = "qcom,rpm-pm8998-regulators"; - - vdd_s1-supply = <&vph_pwr>; - vdd_s2-supply = <&vph_pwr>; - vdd_s3-supply = <&vph_pwr>; - vdd_s4-supply = <&vph_pwr>; - vdd_s5-supply = <&vph_pwr>; - vdd_s6-supply = <&vph_pwr>; - vdd_s7-supply = <&vph_pwr>; - vdd_s8-supply = <&vph_pwr>; - vdd_s9-supply = <&vph_pwr>; - vdd_s10-supply = <&vph_pwr>; - vdd_s11-supply = <&vph_pwr>; - vdd_s12-supply = <&vph_pwr>; - vdd_s13-supply = <&vph_pwr>; - vdd_l1_l27-supply = <&vreg_s7a_1p025>; - vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>; - vdd_l3_l11-supply = <&vreg_s7a_1p025>; - vdd_l4_l5-supply = <&vreg_s7a_1p025>; - vdd_l6-supply = <&vreg_s5a_2p04>; - vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>; - vdd_l9-supply = <&vreg_bob>; - vdd_l10_l23_l25-supply = <&vreg_bob>; - vdd_l13_l19_l21-supply = <&vreg_bob>; - vdd_l16_l28-supply = <&vreg_bob>; - vdd_l18_l22-supply = <&vreg_bob>; - vdd_l20_l24-supply = <&vreg_bob>; - vdd_l26-supply = <&vreg_s3a_1p35>; - vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>; - - vreg_s3a_1p35: s3 { - regulator-min-microvolt = <1352000>; - regulator-max-microvolt = <1352000>; - }; - vreg_s4a_1p8: s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-allow-set-load; - }; - vreg_s5a_2p04: s5 { - regulator-min-microvolt = <1904000>; - regulator-max-microvolt = <2040000>; - }; - vreg_s7a_1p025: s7 { - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1028000>; - }; - vreg_l1a_0p875: l1 { - regulator-min-microvolt = <880000>; - regulator-max-microvolt = <880000>; - }; - vreg_l2a_1p2: l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - vreg_l3a_1p0: l3 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; - vreg_l5a_0p8: l5 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <800000>; - }; - vreg_l6a_1p8: l6 { - regulator-min-microvolt = <1808000>; - regulator-max-microvolt = <1808000>; - }; - vreg_l7a_1p8: l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - vreg_l8a_1p2: l8 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - vreg_l9a_1p8: l9 { - regulator-min-microvolt = <1808000>; - regulator-max-microvolt = <2960000>; - }; - vreg_l10a_1p8: l10 { - regulator-min-microvolt = <1808000>; - regulator-max-microvolt = <2960000>; - }; - vreg_l11a_1p0: l11 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; - vreg_l12a_1p8: l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - vreg_l13a_2p95: l13 { - regulator-min-microvolt = <1808000>; - regulator-max-microvolt = <2960000>; - }; - vreg_l14a_1p88: l14 { - regulator-min-microvolt = <1880000>; - regulator-max-microvolt = <1880000>; - }; - vreg_l15a_1p8: l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - vreg_l16a_2p7: l16 { - regulator-min-microvolt = <2704000>; - regulator-max-microvolt = <2704000>; - }; - vreg_l17a_1p3: l17 { - regulator-min-microvolt = <1304000>; - regulator-max-microvolt = <1304000>; - }; - vreg_l18a_2p7: l18 { - regulator-min-microvolt = <2704000>; - regulator-max-microvolt = <2704000>; - }; - vreg_l19a_3p0: l19 { - regulator-min-microvolt = <3008000>; - regulator-max-microvolt = <3008000>; - }; - vreg_l20a_2p95: l20 { - regulator-min-microvolt = <2960000>; - regulator-max-microvolt = <2960000>; - regulator-allow-set-load; - }; - vreg_l21a_2p95: l21 { - regulator-min-microvolt = <2960000>; - regulator-max-microvolt = <2960000>; - regulator-allow-set-load; - regulator-system-load = <800000>; - }; - vreg_l22a_2p85: l22 { - regulator-min-microvolt = <2864000>; - regulator-max-microvolt = <2864000>; - }; - vreg_l23a_3p3: l23 { - regulator-min-microvolt = <3312000>; - regulator-max-microvolt = <3312000>; - }; - vreg_l24a_3p075: l24 { - regulator-min-microvolt = <3088000>; - regulator-max-microvolt = <3088000>; - }; - vreg_l25a_3p3: l25 { - regulator-min-microvolt = <3104000>; - regulator-max-microvolt = <3312000>; - }; - vreg_l26a_1p2: l26 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-allow-set-load; - }; - vreg_l28_3p0: l28 { - regulator-min-microvolt = <3008000>; - regulator-max-microvolt = <3008000>; - }; - - vreg_lvs1a_1p8: lvs1 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vreg_lvs2a_1p8: lvs2 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - }; - - pmi8998-regulators { - compatible = "qcom,rpm-pmi8998-regulators"; - - vdd_bob-supply = <&vph_pwr>; - - vreg_bob: bob { - regulator-min-microvolt = <3312000>; - regulator-max-microvolt = <3600000>; - }; - }; -}; - -&remoteproc_adsp { - status = "okay"; -}; - -&remoteproc_mss { - status = "okay"; -}; - -&remoteproc_slpi { - status = "okay"; -}; - -&tlmm { - gpio-reserved-ranges = <0 4>, <81 4>; -}; - -&sdhc2 { - status = "okay"; - cd-gpios = <&tlmm 95 GPIO_ACTIVE_LOW>; - - vmmc-supply = <&vreg_l21a_2p95>; - vqmmc-supply = <&vreg_l13a_2p95>; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; -}; - -&stm { - status = "okay"; -}; - -&ufshc { - status = "okay"; - vcc-supply = <&vreg_l20a_2p95>; - vccq-supply = <&vreg_l26a_1p2>; - vccq2-supply = <&vreg_s4a_1p8>; - vcc-max-microamp = <750000>; - vccq-max-microamp = <560000>; - vccq2-max-microamp = <750000>; -}; - -&ufsphy { - status = "okay"; - vdda-phy-supply = <&vreg_l1a_0p875>; - vdda-pll-supply = <&vreg_l2a_1p2>; - vddp-ref-clk-supply = <&vreg_l26a_1p2>; -}; - -&usb3 { - status = "okay"; -}; - -&usb3_dwc3 { - dr_mode = "host"; /* Force to host until we have Type-C hooked up */ -}; - -&usb3phy { - status = "okay"; - - vdda-phy-supply = <&vreg_l1a_0p875>; - vdda-pll-supply = <&vreg_l2a_1p2>; -}; - -&wifi { - status = "okay"; - - vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; - vdd-1.8-xo-supply = <&vreg_l7a_1p8>; - vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; - vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; -}; - -/* PINCTRL - board-specific pinctrl */ -&blsp1_uart3_on { - rx { - /delete-property/ bias-disable; - /* - * Configure a pull-up on 45 (RX). This is needed to - * avoid garbage data when the TX pin of the Bluetooth - * module is in tri-state (module powered off or not - * driving the signal yet). - */ - bias-pull-up; - }; - - cts { - /delete-property/ bias-disable; - /* - * Configure a pull-down on 47 (CTS) to match the pull - * of the Bluetooth module. - */ - bias-pull-down; - }; -}; diff --git a/dts/src/arm64/qcom/msm8998-oneplus-cheeseburger.dts b/dts/src/arm64/qcom/msm8998-oneplus-cheeseburger.dts index 9563eb62db..ef2a88a64d 100644 --- a/dts/src/arm64/qcom/msm8998-oneplus-cheeseburger.dts +++ b/dts/src/arm64/qcom/msm8998-oneplus-cheeseburger.dts @@ -32,7 +32,7 @@ }; &pmi8998_gpio { - button_backlight_default: button-backlight-default { + button_backlight_default: button-backlight-state { pinconf { pins = "gpio5"; function = "normal"; diff --git a/dts/src/arm64/qcom/msm8998-oneplus-common.dtsi b/dts/src/arm64/qcom/msm8998-oneplus-common.dtsi index dbaea360bf..62bda23791 100644 --- a/dts/src/arm64/qcom/msm8998-oneplus-common.dtsi +++ b/dts/src/arm64/qcom/msm8998-oneplus-common.dtsi @@ -11,9 +11,9 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include "msm8998.dtsi" +#include "pm8005.dtsi" #include "pm8998.dtsi" #include "pmi8998.dtsi" -#include "pm8005.dtsi" / { /* Required for bootloader to select correct board */ @@ -32,6 +32,19 @@ height = <1920>; stride = <(1080 * 4)>; format = "a8r8g8b8"; + /* + * That's a lot of clocks, but it's necessary due + * to unused clk cleanup & no panel driver yet.. + */ + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_VSYNC_CLK>, + <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_BYTE0_CLK>, + <&mmcc MDSS_BYTE0_INTF_CLK>, + <&mmcc MDSS_PCLK0_CLK>, + <&mmcc MDSS_ESC0_CLK>; + power-domains = <&mmcc MDSS_GDSC>; }; }; @@ -77,7 +90,7 @@ pinctrl-names = "default"; pinctrl-0 = <&vol_keys_default>; - vol-down { + button-vol-down { label = "Volume down"; gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; @@ -85,7 +98,7 @@ wakeup-source; }; - vol-up { + button-vol-up { label = "Volume up"; gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; @@ -101,7 +114,7 @@ pinctrl-names = "default"; pinctrl-0 = <&hall_sensor_default>; - hall-sensor { + event-hall-sensor { label = "Hall Effect Sensor"; gpios = <&tlmm 124 GPIO_ACTIVE_LOW>; linux,input-type = <EV_SW>; @@ -245,32 +258,24 @@ status = "okay"; }; -&pm8005_lsid1 { - pm8005-regulators { - compatible = "qcom,pm8005-regulators"; - - vdd_s1-supply = <&vph_pwr>; - - pm8005_s1: s1 { /* VDD_GFX supply */ - regulator-min-microvolt = <524000>; - regulator-max-microvolt = <1100000>; - regulator-enable-ramp-delay = <500>; - - /* hack until we rig up the gpu consumer */ - regulator-always-on; - }; +&pm8005_regulators { + /* VDD_GFX supply */ + pm8005_s1: s1 { + regulator-min-microvolt = <524000>; + regulator-max-microvolt = <1100000>; + regulator-enable-ramp-delay = <500>; + /* Hack until we rig up the gpu consumer */ + regulator-always-on; }; }; &pm8998_gpio { - vol_keys_default: vol-keys-default { - pinconf { - pins = "gpio5", "gpio6"; - function = "normal"; - bias-pull-up; - input-enable; - qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; - }; + vol_keys_default: vol-keys-state { + pins = "gpio5", "gpio6"; + function = "normal"; + bias-pull-up; + input-enable; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; }; }; @@ -318,91 +323,113 @@ regulator-min-microvolt = <1352000>; regulator-max-microvolt = <1352000>; }; + vreg_s4a_1p8: s4 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-allow-set-load; }; + vreg_s5a_2p04: s5 { regulator-min-microvolt = <1904000>; regulator-max-microvolt = <2040000>; }; + vreg_s7a_1p025: s7 { regulator-min-microvolt = <900000>; regulator-max-microvolt = <1028000>; }; + vreg_l1a_0p875: l1 { regulator-min-microvolt = <880000>; regulator-max-microvolt = <880000>; }; + vreg_l2a_1p2: l2 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; + vreg_l3a_1p0: l3 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; }; + vreg_l5a_0p8: l5 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <800000>; }; + vreg_l6a_1p8: l6 { regulator-min-microvolt = <1808000>; regulator-max-microvolt = <1808000>; }; + vreg_l7a_1p8: l7 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; + vreg_l8a_1p2: l8 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; + vreg_l9a_1p8: l9 { regulator-min-microvolt = <1808000>; regulator-max-microvolt = <2960000>; }; + vreg_l10a_1p8: l10 { regulator-min-microvolt = <1808000>; regulator-max-microvolt = <2960000>; }; + vreg_l11a_1p0: l11 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; }; + vreg_l12a_1p8: l12 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; + vreg_l13a_2p95: l13 { regulator-min-microvolt = <1808000>; regulator-max-microvolt = <2960000>; }; + vreg_l14a_1p88: l14 { regulator-min-microvolt = <1880000>; regulator-max-microvolt = <1880000>; }; + vreg_l15a_1p8: l15 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; + vreg_l16a_2p7: l16 { regulator-min-microvolt = <2704000>; regulator-max-microvolt = <2704000>; }; + vreg_l17a_1p3: l17 { regulator-min-microvolt = <1304000>; regulator-max-microvolt = <1304000>; }; + vreg_l18a_2p7: l18 { regulator-min-microvolt = <2704000>; regulator-max-microvolt = <2704000>; }; + vreg_l19a_3p0: l19 { regulator-min-microvolt = <3008000>; regulator-max-microvolt = <3008000>; }; + vreg_l20a_2p95: l20 { regulator-min-microvolt = <2960000>; regulator-max-microvolt = <2960000>; @@ -411,34 +438,41 @@ vreg_l21a_2p95: l21 { regulator-min-microvolt = <2960000>; regulator-max-microvolt = <2960000>; - regulator-allow-set-load; regulator-system-load = <800000>; + regulator-allow-set-load; }; + vreg_l22a_2p85: l22 { regulator-min-microvolt = <2864000>; regulator-max-microvolt = <2864000>; }; + vreg_l23a_3p3: l23 { regulator-min-microvolt = <3312000>; regulator-max-microvolt = <3312000>; }; + vreg_l24a_3p075: l24 { regulator-min-microvolt = <3088000>; regulator-max-microvolt = <3088000>; }; + vreg_l25a_3p3: l25 { regulator-min-microvolt = <3104000>; regulator-max-microvolt = <3312000>; }; + vreg_l26a_1p2: l26 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-allow-set-load; }; + vreg_l28_3p0: l28 { regulator-min-microvolt = <3008000>; regulator-max-microvolt = <3008000>; }; + vreg_lvs1a_1p8: lvs1 { }; vreg_lvs2a_1p8: lvs2 { }; }; diff --git a/dts/src/arm64/qcom/msm8998-sony-xperia-yoshino-lilac.dts b/dts/src/arm64/qcom/msm8998-sony-xperia-yoshino-lilac.dts index caacb7c284..fcaefc1b1e 100644 --- a/dts/src/arm64/qcom/msm8998-sony-xperia-yoshino-lilac.dts +++ b/dts/src/arm64/qcom/msm8998-sony-xperia-yoshino-lilac.dts @@ -29,3 +29,7 @@ regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; }; + +&vreg_lvs1a_1p8 { + status = "disabled"; +}; diff --git a/dts/src/arm64/qcom/msm8998-sony-xperia-yoshino-maple.dts b/dts/src/arm64/qcom/msm8998-sony-xperia-yoshino-maple.dts index 978495a8a6..20fe0394a3 100644 --- a/dts/src/arm64/qcom/msm8998-sony-xperia-yoshino-maple.dts +++ b/dts/src/arm64/qcom/msm8998-sony-xperia-yoshino-maple.dts @@ -38,7 +38,7 @@ }; &pmi8998_gpio { - disp_dvdd_en: disp-dvdd-en-active { + disp_dvdd_en: disp-dvdd-en-active-state { pins = "gpio10"; function = "normal"; bias-disable; diff --git a/dts/src/arm64/qcom/msm8998-sony-xperia-yoshino-poplar.dts b/dts/src/arm64/qcom/msm8998-sony-xperia-yoshino-poplar.dts index 4a1f98a210..c21333aa73 100644 --- a/dts/src/arm64/qcom/msm8998-sony-xperia-yoshino-poplar.dts +++ b/dts/src/arm64/qcom/msm8998-sony-xperia-yoshino-poplar.dts @@ -26,11 +26,13 @@ }; &vreg_l18a_2p85 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; + /* Note: Round-down from 2850000 to be a multiple of PLDO step-size 8000 */ + regulator-min-microvolt = <2848000>; + regulator-max-microvolt = <2848000>; }; &vreg_l22a_2p85 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; + /* Note: Round-down from 2700000 to be a multiple of PLDO step-size 8000 */ + regulator-min-microvolt = <2696000>; + regulator-max-microvolt = <2696000>; }; diff --git a/dts/src/arm64/qcom/msm8998-sony-xperia-yoshino.dtsi b/dts/src/arm64/qcom/msm8998-sony-xperia-yoshino.dtsi index 47488a1aec..d086390822 100644 --- a/dts/src/arm64/qcom/msm8998-sony-xperia-yoshino.dtsi +++ b/dts/src/arm64/qcom/msm8998-sony-xperia-yoshino.dtsi @@ -5,15 +5,13 @@ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> */ +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include "msm8998.dtsi" #include "pm8005.dtsi" #include "pm8998.dtsi" #include "pmi8998.dtsi" -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> -#include <dt-bindings/sound/qcom,q6afe.h> -#include <dt-bindings/sound/qcom,q6asm.h> / { /* required for bootloader to select correct board */ @@ -21,8 +19,6 @@ qcom,board-id = <8 0>; clocks { - compatible = "simple-bus"; - div1_mclk: divclk1 { compatible = "gpio-gate-clock"; pinctrl-0 = <&audio_mclk_pin>; @@ -91,13 +87,21 @@ regulator-boot-on; }; + extcon_usb: extcon-usb { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&tlmm 38 GPIO_ACTIVE_HIGH>; + vbus-gpio = <&tlmm 128 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_extcon_active &usb_vbus_active>; + }; + gpio-keys { compatible = "gpio-keys"; label = "Side buttons"; pinctrl-names = "default"; pinctrl-0 = <&vol_down_pin_a>, <&cam_focus_pin_a>, <&cam_snapshot_pin_a>; - vol-down { + button-vol-down { label = "Volume Down"; gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; @@ -106,7 +110,7 @@ debounce-interval = <15>; }; - camera-snapshot { + button-camera-snapshot { label = "Camera Snapshot"; gpios = <&pm8998_gpio 7 GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; @@ -114,7 +118,7 @@ debounce-interval = <15>; }; - camera-focus { + button-camera-focus { label = "Camera Focus"; gpios = <&pm8998_gpio 8 GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; @@ -129,7 +133,7 @@ pinctrl-names = "default"; pinctrl-0 = <&hall_sensor0_default>; - hall-sensor0 { + event-hall-sensor0 { label = "Cover Hall Sensor"; gpios = <&tlmm 124 GPIO_ACTIVE_LOW>; linux,input-type = <EV_SW>; @@ -245,6 +249,24 @@ status = "okay"; }; +&blsp2_i2c2 { + status = "okay"; + + proximity@29 { + compatible = "st,vl53l0x"; + reg = <0x29>; + + interrupt-parent = <&tlmm>; + interrupts = <22 IRQ_TYPE_EDGE_FALLING>; + + reset-gpios = <&tlmm 27 GPIO_ACTIVE_LOW>; + vdd-supply = <&cam_vio_vreg>; + + pinctrl-names = "default"; + pinctrl-0 = <&tof_int &tof_reset>; + }; +}; + &ibb { regulator-min-microamp = <800000>; regulator-max-microamp = <800000>; @@ -270,32 +292,19 @@ regulator-soft-start; }; -&mmcc { - status = "ok"; -}; - -&mmss_smmu { - status = "ok"; -}; - -&pm8005_lsid1 { - pm8005-regulators { - compatible = "qcom,pm8005-regulators"; - - vdd_s1-supply = <&vph_pwr>; - - /* VDD_GFX supply */ - pm8005_s1: s1 { - regulator-min-microvolt = <524000>; - regulator-max-microvolt = <1088000>; - regulator-enable-ramp-delay = <500>; - regulator-always-on; - }; +&pm8005_regulators { + /* VDD_GFX supply */ + pm8005_s1: s1 { + regulator-min-microvolt = <524000>; + regulator-max-microvolt = <1088000>; + regulator-enable-ramp-delay = <500>; + /* Hack until we rig up the gpu consumer */ + regulator-always-on; }; }; &pm8998_gpio { - vol_down_pin_a: vol-down-active { + vol_down_pin_a: vol-down-active-state { pins = "gpio5"; function = PMIC_GPIO_FUNC_NORMAL; bias-pull-up; @@ -303,7 +312,7 @@ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; }; - cam_focus_pin_a: cam-focus-btn-active { + cam_focus_pin_a: cam-focus-btn-active-state { pins = "gpio7"; function = PMIC_GPIO_FUNC_NORMAL; bias-pull-up; @@ -311,7 +320,7 @@ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; }; - cam_snapshot_pin_a: cam-snapshot-btn-active { + cam_snapshot_pin_a: cam-snapshot-btn-active-state { pins = "gpio8"; function = PMIC_GPIO_FUNC_NORMAL; bias-pull-up; @@ -319,7 +328,7 @@ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; }; - audio_mclk_pin: audio-mclk-pin-active { + audio_mclk_pin: audio-mclk-pin-active-state { pins = "gpio13"; function = "func2"; power-source = <0>; @@ -327,7 +336,7 @@ }; &pmi8998_gpio { - cam_vio_default: cam-vio-active { + cam_vio_default: cam-vio-active-state { pins = "gpio1"; function = PMIC_GPIO_FUNC_NORMAL; bias-disable; @@ -337,7 +346,7 @@ power-source = <1>; }; - vib_default: vib-en { + vib_default: vib-en-state { pins = "gpio5"; function = PMIC_GPIO_FUNC_NORMAL; bias-disable; @@ -549,8 +558,8 @@ vqmmc-supply = <&vreg_l13a_2p95>; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + pinctrl-0 = <&sdc2_on &sdc2_cd>; + pinctrl-1 = <&sdc2_off &sdc2_cd>; }; &tlmm { @@ -606,6 +615,14 @@ drive-strength = <2>; }; + tof_int: tof-int { + pins = "gpio22"; + function = "gpio"; + bias-pull-up; + drive-strength = <2>; + input-enable; + }; + cam1_vdig_default: cam1-vdig-default { pins = "gpio25"; function = "gpio"; @@ -613,6 +630,20 @@ drive-strength = <2>; }; + usb_extcon_active: usb-extcon-active { + pins = "gpio38"; + function = "gpio"; + bias-disable; + drive-strength = <16>; + }; + + tof_reset: tof-reset { + pins = "gpio27"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + hall_sensor0_default: acc-cover-open { pins = "gpio124"; function = "gpio"; @@ -628,6 +659,14 @@ bias-pull-up; }; + usb_vbus_active: usb-vbus-active { + pins = "gpio128"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + output-low; + }; + ts_vddio_en: ts-vddio-en-default { pins = "gpio133"; function = "gpio"; @@ -658,6 +697,7 @@ &usb3_dwc3 { /* Force to peripheral until we have Type-C hooked up */ dr_mode = "peripheral"; + extcon = <&extcon_usb>; }; &usb3phy { diff --git a/dts/src/arm64/qcom/msm8998.dtsi b/dts/src/arm64/qcom/msm8998.dtsi index 758c45bbbe..02d21bff21 100644 --- a/dts/src/arm64/qcom/msm8998.dtsi +++ b/dts/src/arm64/qcom/msm8998.dtsi @@ -838,7 +838,7 @@ }; qfprom: qfprom@784000 { - compatible = "qcom,qfprom"; + compatible = "qcom,msm8998-qfprom", "qcom,qfprom"; reg = <0x00784000 0x621c>; #address-cells = <1>; #size-cells = <1>; @@ -929,7 +929,7 @@ interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 0 135 IRQ_TYPE_LEVEL_HIGH>, + interrupt-map = <0 0 0 1 &intc 0 0 135 IRQ_TYPE_LEVEL_HIGH>, <0 0 0 2 &intc 0 0 136 IRQ_TYPE_LEVEL_HIGH>, <0 0 0 3 &intc 0 0 138 IRQ_TYPE_LEVEL_HIGH>, <0 0 0 4 &intc 0 0 139 IRQ_TYPE_LEVEL_HIGH>; @@ -1057,85 +1057,58 @@ reg = <0x03400000 0xc00000>; interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; - #gpio-cells = <0x2>; + #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <0x2>; + #interrupt-cells = <2>; - sdc2_clk_on: sdc2_clk_on { - config { + sdc2_on: sdc2-on { + clk { pins = "sdc2_clk"; - bias-disable; drive-strength = <16>; - }; - }; - - sdc2_clk_off: sdc2_clk_off { - config { - pins = "sdc2_clk"; bias-disable; - drive-strength = <2>; }; - }; - sdc2_cmd_on: sdc2_cmd_on { - config { + cmd { pins = "sdc2_cmd"; - bias-pull-up; drive-strength = <10>; - }; - }; - - sdc2_cmd_off: sdc2_cmd_off { - config { - pins = "sdc2_cmd"; bias-pull-up; - drive-strength = <2>; }; - }; - sdc2_data_on: sdc2_data_on { - config { + data { pins = "sdc2_data"; - bias-pull-up; drive-strength = <10>; + bias-pull-up; }; }; - sdc2_data_off: sdc2_data_off { - config { - pins = "sdc2_data"; - bias-pull-up; + sdc2_off: sdc2-off { + clk { + pins = "sdc2_clk"; drive-strength = <2>; + bias-disable; }; - }; - sdc2_cd_on: sdc2_cd_on { - mux { - pins = "gpio95"; - function = "gpio"; + cmd { + pins = "sdc2_cmd"; + drive-strength = <2>; + bias-pull-up; }; - config { - pins = "gpio95"; - bias-pull-up; + data { + pins = "sdc2_data"; drive-strength = <2>; + bias-pull-up; }; }; - sdc2_cd_off: sdc2_cd_off { - mux { - pins = "gpio95"; - function = "gpio"; - }; - - config { - pins = "gpio95"; - bias-pull-up; - drive-strength = <2>; - }; + sdc2_cd: sdc2-cd { + pins = "gpio95"; + function = "gpio"; + bias-pull-up; + drive-strength = <2>; }; - blsp1_uart3_on: blsp1_uart3_on { + blsp1_uart3_on: blsp1-uart3-on { tx { pins = "gpio45"; function = "blsp_uart3_a"; @@ -1416,7 +1389,7 @@ status = "disabled"; gpu_opp_table: opp-table { - compatible = "operating-points-v2"; + compatible = "operating-points-v2"; opp-710000097 { opp-hz = /bits/ 64 <710000097>; opp-level = <RPM_SMD_LEVEL_TURBO>; @@ -2080,7 +2053,7 @@ <0xc010600 0x128>, <0xc010800 0x200>; #phy-cells = <0>; - #clock-cells = <1>; + #clock-cells = <0>; clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>; clock-names = "pipe0"; clock-output-names = "usb3_phy_pipe_clk_src"; @@ -2102,7 +2075,7 @@ nvmem-cells = <&qusb2_hstx_trim>; }; - sdhc2: sdhci@c0a4900 { + sdhc2: mmc@c0a4900 { compatible = "qcom,sdhci-msm-v4"; reg = <0x0c0a4900 0x314>, <0x0c0a4000 0x800>; reg-names = "hc_mem", "core_mem"; @@ -2415,7 +2388,6 @@ #reset-cells = <1>; #power-domain-cells = <1>; reg = <0xc8c0000 0x40000>; - status = "disabled"; clock-names = "xo", "gpll0", @@ -2450,7 +2422,6 @@ <&mmcc BIMC_SMMU_AXI_CLK>; clock-names = "iface-mm", "iface-smmu", "bus-mm", "bus-smmu"; - status = "disabled"; #global-interrupts = <0>; interrupts = diff --git a/dts/src/arm64/qcom/pm6350.dtsi b/dts/src/arm64/qcom/pm6350.dtsi index c5d8506456..ecf9b99191 100644 --- a/dts/src/arm64/qcom/pm6350.dtsi +++ b/dts/src/arm64/qcom/pm6350.dtsi @@ -36,9 +36,10 @@ }; pm6350_gpios: gpios@c000 { - compatible = "qcom,pm6350-gpio"; + compatible = "qcom,pm6350-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; + gpio-ranges = <&pm6350_gpios 0 0 9>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/dts/src/arm64/qcom/pm660.dtsi b/dts/src/arm64/qcom/pm660.dtsi index c482663aad..d0eefbb516 100644 --- a/dts/src/arm64/qcom/pm660.dtsi +++ b/dts/src/arm64/qcom/pm660.dtsi @@ -171,7 +171,7 @@ }; pm660_gpios: gpios@c000 { - compatible = "qcom,pm660-gpio"; + compatible = "qcom,pm660-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; gpio-ranges = <&pm660_gpios 0 0 13>; diff --git a/dts/src/arm64/qcom/pm660l.dtsi b/dts/src/arm64/qcom/pm660l.dtsi index cfef423536..c7945470ff 100644 --- a/dts/src/arm64/qcom/pm660l.dtsi +++ b/dts/src/arm64/qcom/pm660l.dtsi @@ -65,9 +65,15 @@ #address-cells = <1>; #size-cells = <0>; + pm660l_lpg: lpg@b100 { + compatible = "qcom,pm660l-lpg"; + + status = "disabled"; + }; + pm660l_wled: leds@d800 { compatible = "qcom,pm660l-wled"; - reg = <0xd800 0xd900>; + reg = <0xd800>, <0xd900>; interrupts = <0x3 0xd8 0x1 IRQ_TYPE_EDGE_RISING>; interrupt-names = "ovp"; label = "backlight"; diff --git a/dts/src/arm64/qcom/pm8005.dtsi b/dts/src/arm64/qcom/pm8005.dtsi index 3f97607d8b..50fb6c753b 100644 --- a/dts/src/arm64/qcom/pm8005.dtsi +++ b/dts/src/arm64/qcom/pm8005.dtsi @@ -28,5 +28,9 @@ reg = <0x5 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; + + pm8005_regulators: regulators { + compatible = "qcom,pm8005-regulators"; + }; }; }; diff --git a/dts/src/arm64/qcom/pm8009.dtsi b/dts/src/arm64/qcom/pm8009.dtsi index b126d7e7e4..0c2c424be0 100644 --- a/dts/src/arm64/qcom/pm8009.dtsi +++ b/dts/src/arm64/qcom/pm8009.dtsi @@ -19,9 +19,10 @@ }; pm8009_gpios: gpio@c000 { - compatible = "qcom,pm8005-gpio"; + compatible = "qcom,pm8005-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; + gpio-ranges = <&pm8009_gpios 0 0 4>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/dts/src/arm64/qcom/pm8150.dtsi b/dts/src/arm64/qcom/pm8150.dtsi index 0df76f7b1c..fd84342159 100644 --- a/dts/src/arm64/qcom/pm8150.dtsi +++ b/dts/src/arm64/qcom/pm8150.dtsi @@ -127,9 +127,10 @@ }; pm8150_gpios: gpio@c000 { - compatible = "qcom,pm8150-gpio"; + compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; + gpio-ranges = <&pm8150_gpios 0 0 10>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/dts/src/arm64/qcom/pm8150b.dtsi b/dts/src/arm64/qcom/pm8150b.dtsi index 058cc5107c..5d1ec3a6cc 100644 --- a/dts/src/arm64/qcom/pm8150b.dtsi +++ b/dts/src/arm64/qcom/pm8150b.dtsi @@ -112,9 +112,10 @@ }; pm8150b_gpios: gpio@c000 { - compatible = "qcom,pm8150b-gpio"; + compatible = "qcom,pm8150b-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; + gpio-ranges = <&pm8150b_gpios 0 0 12>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; @@ -126,5 +127,15 @@ reg = <0x3 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; + + pm8150b_lpg: lpg { + compatible = "qcom,pm8150b-lpg"; + + #address-cells = <1>; + #size-cells = <0>; + #pwm-cells = <2>; + + status = "disabled"; + }; }; }; diff --git a/dts/src/arm64/qcom/pm8150l.dtsi b/dts/src/arm64/qcom/pm8150l.dtsi index 52f094a2b7..c62d023b39 100644 --- a/dts/src/arm64/qcom/pm8150l.dtsi +++ b/dts/src/arm64/qcom/pm8150l.dtsi @@ -100,9 +100,10 @@ }; pm8150l_gpios: gpio@c000 { - compatible = "qcom,pm8150l-gpio"; + compatible = "qcom,pm8150l-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; + gpio-ranges = <&pm8150l_gpios 0 0 12>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; @@ -114,5 +115,16 @@ reg = <0x5 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; + + pm8150l_lpg: lpg { + compatible = "qcom,pm8150l-lpg"; + + #address-cells = <1>; + #size-cells = <0>; + #pwm-cells = <2>; + + status = "disabled"; + }; + }; }; diff --git a/dts/src/arm64/qcom/pm8350.dtsi b/dts/src/arm64/qcom/pm8350.dtsi index b10f33afa5..2dfeb99300 100644 --- a/dts/src/arm64/qcom/pm8350.dtsi +++ b/dts/src/arm64/qcom/pm8350.dtsi @@ -45,9 +45,10 @@ }; pm8350_gpios: gpio@8800 { - compatible = "qcom,pm8350-gpio"; + compatible = "qcom,pm8350-gpio", "qcom,spmi-gpio"; reg = <0x8800>; gpio-controller; + gpio-ranges = <&pm8350_gpios 0 0 10>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/dts/src/arm64/qcom/pm8350b.dtsi b/dts/src/arm64/qcom/pm8350b.dtsi index f1d1d4c8ed..f1c7bd9d07 100644 --- a/dts/src/arm64/qcom/pm8350b.dtsi +++ b/dts/src/arm64/qcom/pm8350b.dtsi @@ -45,9 +45,10 @@ }; pm8350b_gpios: gpio@8800 { - compatible = "qcom,pm8350b-gpio"; + compatible = "qcom,pm8350b-gpio", "qcom,spmi-gpio"; reg = <0x8800>; gpio-controller; + gpio-ranges = <&pm8350b_gpios 0 0 8>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/dts/src/arm64/qcom/pm8916.dtsi b/dts/src/arm64/qcom/pm8916.dtsi index d589024328..606c2a6d1f 100644 --- a/dts/src/arm64/qcom/pm8916.dtsi +++ b/dts/src/arm64/qcom/pm8916.dtsi @@ -108,14 +108,13 @@ }; pm8916_gpios: gpios@c000 { - compatible = "qcom,pm8916-gpio"; + compatible = "qcom,pm8916-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; + gpio-ranges = <&pm8916_gpios 0 0 4>; #gpio-cells = <2>; - interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, - <0 0xc1 0 IRQ_TYPE_NONE>, - <0 0xc2 0 IRQ_TYPE_NONE>, - <0 0xc3 0 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; }; }; @@ -125,6 +124,14 @@ #address-cells = <1>; #size-cells = <0>; + pm8916_pwm: pwm { + compatible = "qcom,pm8916-pwm"; + + #pwm-cells = <2>; + + status = "disabled"; + }; + pm8916_vib: vibrator@c000 { compatible = "qcom,pm8916-vib"; reg = <0xc000>; diff --git a/dts/src/arm64/qcom/pm8994.dtsi b/dts/src/arm64/qcom/pm8994.dtsi index 5ab46117d7..ab342397fc 100644 --- a/dts/src/arm64/qcom/pm8994.dtsi +++ b/dts/src/arm64/qcom/pm8994.dtsi @@ -135,6 +135,16 @@ #address-cells = <1>; #size-cells = <0>; + pm8994_lpg: lpg { + compatible = "qcom,pm8994-lpg"; + + #address-cells = <1>; + #size-cells = <0>; + #pwm-cells = <2>; + + status = "disabled"; + }; + pm8994_spmi_regulators: regulators { compatible = "qcom,pm8994-regulators"; }; diff --git a/dts/src/arm64/qcom/pmi8994.dtsi b/dts/src/arm64/qcom/pmi8994.dtsi index 6e7c252568..84c44912ec 100644 --- a/dts/src/arm64/qcom/pmi8994.dtsi +++ b/dts/src/arm64/qcom/pmi8994.dtsi @@ -19,6 +19,16 @@ interrupt-controller; #interrupt-cells = <2>; }; + + pmi8994_mpps: mpps@a000 { + compatible = "qcom,pmi8994-mpp"; + reg = <0xa000>; + gpio-controller; + gpio-ranges = <&pmi8994_mpps 0 0 4>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; }; pmic@3 { @@ -27,6 +37,16 @@ #address-cells = <1>; #size-cells = <0>; + pmi8994_lpg: lpg { + compatible = "qcom,pmi8994-lpg"; + + #address-cells = <1>; + #size-cells = <0>; + #pwm-cells = <2>; + + status = "disabled"; + }; + pmi8994_spmi_regulators: regulators { compatible = "qcom,pmi8994-regulators"; #address-cells = <1>; @@ -35,7 +55,7 @@ pmi8994_wled: wled@d800 { compatible = "qcom,pmi8994-wled"; - reg = <0xd800 0xd900>; + reg = <0xd800>, <0xd900>; interrupts = <3 0xd8 0x02 IRQ_TYPE_EDGE_RISING>; interrupt-names = "short"; qcom,cabc; diff --git a/dts/src/arm64/qcom/pmi8998.dtsi b/dts/src/arm64/qcom/pmi8998.dtsi index 0fef5f113f..6d3d212560 100644 --- a/dts/src/arm64/qcom/pmi8998.dtsi +++ b/dts/src/arm64/qcom/pmi8998.dtsi @@ -42,9 +42,19 @@ }; }; + pmi8998_lpg: lpg { + compatible = "qcom,pmi8998-lpg"; + + #address-cells = <1>; + #size-cells = <0>; + #pwm-cells = <2>; + + status = "disabled"; + }; + pmi8998_wled: leds@d800 { compatible = "qcom,pmi8998-wled"; - reg = <0xd800 0xd900>; + reg = <0xd800>, <0xd900>; interrupts = <0x3 0xd8 0x1 IRQ_TYPE_EDGE_RISING>, <0x3 0xd8 0x2 IRQ_TYPE_EDGE_RISING>; interrupt-names = "ovp", "short"; @@ -52,6 +62,5 @@ status = "disabled"; }; - }; }; diff --git a/dts/src/arm64/qcom/pmm8155au_1.dtsi b/dts/src/arm64/qcom/pmm8155au_1.dtsi index 7072e5a2e7..68e9122363 100644 --- a/dts/src/arm64/qcom/pmm8155au_1.dtsi +++ b/dts/src/arm64/qcom/pmm8155au_1.dtsi @@ -116,7 +116,7 @@ }; pmm8155au_1_gpios: gpio@c000 { - compatible = "qcom,pmm8155au-gpio"; + compatible = "qcom,pmm8155au-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; #gpio-cells = <2>; diff --git a/dts/src/arm64/qcom/pmm8155au_2.dtsi b/dts/src/arm64/qcom/pmm8155au_2.dtsi index 72075964fb..c307fc6625 100644 --- a/dts/src/arm64/qcom/pmm8155au_2.dtsi +++ b/dts/src/arm64/qcom/pmm8155au_2.dtsi @@ -89,7 +89,7 @@ }; pmm8155au_2_gpios: gpio@c000 { - compatible = "qcom,pmm8155au-gpio"; + compatible = "qcom,pmm8155au-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; #gpio-cells = <2>; diff --git a/dts/src/arm64/qcom/pmr735b.dtsi b/dts/src/arm64/qcom/pmr735b.dtsi index 6043241886..ec24c44780 100644 --- a/dts/src/arm64/qcom/pmr735b.dtsi +++ b/dts/src/arm64/qcom/pmr735b.dtsi @@ -45,9 +45,10 @@ }; pmr735b_gpios: gpio@8800 { - compatible = "qcom,pmr735b-gpio"; + compatible = "qcom,pmr735b-gpio", "qcom,spmi-gpio"; reg = <0x8800>; gpio-controller; + gpio-ranges = <&pmr735b_gpios 0 0 4>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/dts/src/arm64/qcom/pms405.dtsi b/dts/src/arm64/qcom/pms405.dtsi index 98d173a377..634b0681d0 100644 --- a/dts/src/arm64/qcom/pms405.dtsi +++ b/dts/src/arm64/qcom/pms405.dtsi @@ -38,22 +38,13 @@ #size-cells = <0>; pms405_gpios: gpio@c000 { - compatible = "qcom,pms405-gpio"; + compatible = "qcom,pms405-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; + gpio-ranges = <&pms405_gpios 0 0 12>; #gpio-cells = <2>; - interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, - <0 0xc1 0 IRQ_TYPE_NONE>, - <0 0xc2 0 IRQ_TYPE_NONE>, - <0 0xc3 0 IRQ_TYPE_NONE>, - <0 0xc4 0 IRQ_TYPE_NONE>, - <0 0xc5 0 IRQ_TYPE_NONE>, - <0 0xc6 0 IRQ_TYPE_NONE>, - <0 0xc7 0 IRQ_TYPE_NONE>, - <0 0xc8 0 IRQ_TYPE_NONE>, - <0 0xc9 0 IRQ_TYPE_NONE>, - <0 0xca 0 IRQ_TYPE_NONE>, - <0 0xcb 0 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; }; pon@800 { diff --git a/dts/src/arm64/qcom/qcs404-evb.dtsi b/dts/src/arm64/qcom/qcs404-evb.dtsi index 2f3104a844..1721ebe575 100644 --- a/dts/src/arm64/qcom/qcs404-evb.dtsi +++ b/dts/src/arm64/qcom/qcs404-evb.dtsi @@ -304,7 +304,7 @@ }; &pms405_gpios { - usb_vbus_boost_pin: usb-vbus-boost-pin { + usb_vbus_boost_pin: usb-vbus-boost-state { pinconf { pins = "gpio3"; function = PMIC_GPIO_FUNC_NORMAL; @@ -312,7 +312,7 @@ power-source = <1>; }; }; - usb3_vbus_pin: usb3-vbus-pin { + usb3_vbus_pin: usb3-vbus-state { pinconf { pins = "gpio12"; function = PMIC_GPIO_FUNC_NORMAL; diff --git a/dts/src/arm64/qcom/qcs404.dtsi b/dts/src/arm64/qcom/qcs404.dtsi index d912166b75..9ab9900615 100644 --- a/dts/src/arm64/qcom/qcs404.dtsi +++ b/dts/src/arm64/qcom/qcs404.dtsi @@ -366,7 +366,7 @@ }; qfprom: qfprom@a4000 { - compatible = "qcom,qfprom"; + compatible = "qcom,qcs404-qfprom", "qcom,qfprom"; reg = <0x000a4000 0x1000>; #address-cells = <1>; #size-cells = <1>; @@ -548,7 +548,7 @@ compatible = "snps,dwc3"; reg = <0x07580000 0xcd00>; interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; - phys = <&usb2_phy_sec>, <&usb3_phy>; + phys = <&usb2_phy_prim>, <&usb3_phy>; phy-names = "usb2-phy", "usb3-phy"; snps,has-lpm-erratum; snps,hird-threshold = /bits/ 8 <0x10>; @@ -577,7 +577,7 @@ compatible = "snps,dwc3"; reg = <0x078c0000 0xcc00>; interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; - phys = <&usb2_phy_prim>; + phys = <&usb2_phy_sec>; phy-names = "usb2-phy"; snps,has-lpm-erratum; snps,hird-threshold = /bits/ 8 <0x10>; @@ -669,8 +669,25 @@ }; blsp1_spi1_default: blsp1-spi1-default { - pins = "gpio22", "gpio23", "gpio24", "gpio25"; - function = "blsp_spi1"; + mosi { + pins = "gpio22"; + function = "blsp_spi_mosi_a1"; + }; + + miso { + pins = "gpio23"; + function = "blsp_spi_miso_a1"; + }; + + cs_n { + pins = "gpio24"; + function = "blsp_spi_cs_n_a1"; + }; + + clk { + pins = "gpio25"; + function = "blsp_spi_clk_a1"; + }; }; blsp1_spi2_default: blsp1-spi2-default { @@ -789,7 +806,7 @@ status = "disabled"; }; - sdcc1: sdcc@7804000 { + sdcc1: mmc@7804000 { compatible = "qcom,qcs404-sdhci", "qcom,sdhci-msm-v5"; reg = <0x07804000 0x1000>, <0x7805000 0x1000>; reg-names = "hc", "cqhci"; @@ -798,10 +815,10 @@ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC1_APPS_CLK>, - <&gcc GCC_SDCC1_AHB_CLK>, + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, <&xo_board>; - clock-names = "core", "iface", "xo"; + clock-names = "iface", "core", "xo"; status = "disabled"; }; @@ -1102,8 +1119,8 @@ status = "disabled"; }; - imem@8600000 { - compatible = "simple-mfd"; + sram@8600000 { + compatible = "qcom,qcs404-imem", "syscon", "simple-mfd"; reg = <0x08600000 0x1000>; #address-cells = <1>; diff --git a/dts/src/arm64/qcom/qrb5165-rb5.dts b/dts/src/arm64/qcom/qrb5165-rb5.dts index 0e63f707b9..bf8077a1cf 100644 --- a/dts/src/arm64/qcom/qrb5165-rb5.dts +++ b/dts/src/arm64/qcom/qrb5165-rb5.dts @@ -5,6 +5,7 @@ /dts-v1/; +#include <dt-bindings/leds/common.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include <dt-bindings/sound/qcom,q6afe.h> #include <dt-bindings/sound/qcom,q6asm.h> @@ -57,27 +58,32 @@ leds { compatible = "gpio-leds"; - user4 { + led-user4 { label = "green:user4"; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_GREEN>; gpios = <&pm8150_gpios 10 GPIO_ACTIVE_HIGH>; linux,default-trigger = "panic-indicator"; default-state = "off"; }; - wlan { + led-wlan { label = "yellow:wlan"; + function = LED_FUNCTION_WLAN; + color = <LED_COLOR_ID_YELLOW>; gpios = <&pm8150_gpios 9 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy0tx"; default-state = "off"; }; - bt { + led-bt { label = "blue:bt"; + function = LED_FUNCTION_BLUETOOTH; + color = <LED_COLOR_ID_BLUE>; gpios = <&pm8150_gpios 7 GPIO_ACTIVE_HIGH>; linux,default-trigger = "bluetooth-power"; default-state = "off"; }; - }; lt9611_1v2: lt9611-vdd12-regulator { @@ -796,7 +802,7 @@ "NC", "PM3003A_MODE"; - lt9611_rst_pin: lt9611-rst-pin { + lt9611_rst_pin: lt9611-rst-state { pins = "gpio5"; function = "normal"; @@ -806,6 +812,38 @@ }; }; +&pm8150l_lpg { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_HEARTBEAT; + function-enumerator = <3>; + + linux,default-trigger = "heartbeat"; + default-state = "on"; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <2>; + default-state = "on"; + }; + + led@3 { + reg = <3>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <1>; + }; +}; + &pon_pwrkey { status = "okay"; }; @@ -830,7 +868,7 @@ &q6afedai { qi2s@16 { - reg = <16>; + reg = <PRIMARY_MI2S_RX>; qcom,sd-lines = <0 1 2 3>; }; }; @@ -838,7 +876,7 @@ /* TERT I2S Uses 1 I2S SD Lines for audio on LT9611 HDMI Bridge */ &q6afedai { qi2s@20 { - reg = <20>; + reg = <TERTIARY_MI2S_RX>; qcom,sd-lines = <0>; }; }; @@ -915,7 +953,7 @@ }; codec { - sound-dai = <<9611_codec 0>; + sound-dai = <<9611_codec 0>; }; }; diff --git a/dts/src/arm64/qcom/sa8295p-adp.dts b/dts/src/arm64/qcom/sa8295p-adp.dts new file mode 100644 index 0000000000..9398f03499 --- /dev/null +++ b/dts/src/arm64/qcom/sa8295p-adp.dts @@ -0,0 +1,389 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + * Copyright (c) 2022, Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <dt-bindings/spmi/spmi.h> + +#include "sa8540p.dtsi" + +/ { + model = "Qualcomm SA8295P ADP"; + compatible = "qcom,sa8295p-adp", "qcom,sa8540p"; + + aliases { + serial0 = &qup2_uart17; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&apps_rsc { + pmm8540-a-regulators { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vreg_l3a: ldo3 { + regulator-name = "vreg_l3a"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1208000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l5a: ldo5 { + regulator-name = "vreg_l5a"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l7a: ldo7 { + regulator-name = "vreg_l7a"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l13a: ldo13 { + regulator-name = "vreg_l13a"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + }; + + pmm8540-c-regulators { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_l1c: ldo1 { + regulator-name = "vreg_l1c"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l2c: ldo2 { + regulator-name = "vreg_l2c"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l3c: ldo3 { + regulator-name = "vreg_l3c"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l4c: ldo4 { + regulator-name = "vreg_l4c"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1208000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l6c: ldo6 { + regulator-name = "vreg_l6c"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l7c: ldo7 { + regulator-name = "vreg_l7c"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l10c: ldo10 { + regulator-name = "vreg_l10c"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l17c: ldo17 { + regulator-name = "vreg_l17c"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + }; + + pmm8540-g-regulators { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "g"; + + vreg_l3g: ldo3 { + regulator-name = "vreg_l3g"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l7g: ldo7 { + regulator-name = "vreg_l7g"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l8g: ldo8 { + regulator-name = "vreg_l8g"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + }; +}; + +&qup2 { + status = "okay"; +}; + +&qup2_uart17 { + compatible = "qcom,geni-debug-uart"; + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/sa8540p/adsp.mbn"; + status = "okay"; +}; + +&remoteproc_nsp0 { + firmware-name = "qcom/sa8540p/cdsp.mbn"; + status = "okay"; +}; + +&remoteproc_nsp1 { + firmware-name = "qcom/sa8540p/cdsp1.mbn"; + status = "okay"; +}; + +&spmi_bus { + pm8450a: pmic@0 { + compatible = "qcom,pm8150", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8450a_gpios: gpio@c000 { + compatible = "qcom,pm8150-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pm8450c: pmic@4 { + compatible = "qcom,pm8150", "qcom,spmi-pmic"; + reg = <0x4 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8450c_gpios: gpio@c000 { + compatible = "qcom,pm8150-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pm8450e: pmic@8 { + compatible = "qcom,pm8150", "qcom,spmi-pmic"; + reg = <0x8 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8450e_gpios: gpio@c000 { + compatible = "qcom,pm8150-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pm8450g: pmic@c { + compatible = "qcom,pm8150", "qcom,spmi-pmic"; + reg = <0xc SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8450g_gpios: gpio@c000 { + compatible = "qcom,pm8150-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l17c>; + vcc-max-microamp = <800000>; + vccq-supply = <&vreg_l6c>; + vccq-max-microamp = <900000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l8g>; + vdda-pll-supply = <&vreg_l3g>; + + status = "okay"; +}; + +&ufs_card_hc { + reset-gpios = <&tlmm 229 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l10c>; + vcc-max-microamp = <800000>; + vccq-supply = <&vreg_l3c>; + vccq-max-microamp = <900000>; + + status = "okay"; +}; + +&ufs_card_phy { + vdda-phy-supply = <&vreg_l8g>; + vdda-pll-supply = <&vreg_l3g>; + + status = "okay"; +}; + +&usb_0 { + status = "okay"; +}; + +&usb_0_dwc3 { + /* TODO: Define USB-C connector properly */ + dr_mode = "peripheral"; +}; + +&usb_0_hsphy { + vdda-pll-supply = <&vreg_l5a>; + vdda18-supply = <&vreg_l7a>; + vdda33-supply = <&vreg_l13a>; + + status = "okay"; +}; + +&usb_0_qmpphy { + vdda-phy-supply = <&vreg_l3a>; + vdda-pll-supply = <&vreg_l5a>; + + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + /* TODO: Define USB-C connector properly */ + dr_mode = "host"; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&vreg_l1c>; + vdda18-supply = <&vreg_l7c>; + vdda33-supply = <&vreg_l2c>; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vreg_l4c>; + vdda-pll-supply = <&vreg_l1c>; + + status = "okay"; +}; + +&usb_2_hsphy0 { + vdda-pll-supply = <&vreg_l5a>; + vdda18-supply = <&vreg_l7g>; + vdda33-supply = <&vreg_l13a>; + + status = "okay"; +}; + +&usb_2_hsphy1 { + vdda-pll-supply = <&vreg_l5a>; + vdda18-supply = <&vreg_l7g>; + vdda33-supply = <&vreg_l13a>; + + status = "okay"; +}; + +&usb_2_hsphy2 { + vdda-pll-supply = <&vreg_l5a>; + vdda18-supply = <&vreg_l7g>; + vdda33-supply = <&vreg_l13a>; + + status = "okay"; +}; + +&usb_2_hsphy3 { + vdda-pll-supply = <&vreg_l5a>; + vdda18-supply = <&vreg_l7g>; + vdda33-supply = <&vreg_l13a>; + + status = "okay"; +}; + +&usb_2_qmpphy0 { + vdda-phy-supply = <&vreg_l3a>; + vdda-pll-supply = <&vreg_l5a>; + + status = "okay"; +}; + +&usb_2_qmpphy1 { + vdda-phy-supply = <&vreg_l3a>; + vdda-pll-supply = <&vreg_l5a>; + + status = "okay"; +}; + +&xo_board_clk { + clock-frequency = <38400000>; +}; + +/* PINCTRL */ diff --git a/dts/src/arm64/qcom/sa8540p.dtsi b/dts/src/arm64/qcom/sa8540p.dtsi new file mode 100644 index 0000000000..8ea2886fba --- /dev/null +++ b/dts/src/arm64/qcom/sa8540p.dtsi @@ -0,0 +1,133 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + * Copyright (c) 2022, Linaro Limited + */ + +#include "sc8280xp.dtsi" + +/delete-node/ &cpu0_opp_table; +/delete-node/ &cpu4_opp_table; + +/ { + cpu0_opp_table: cpu0-opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-403200000 { + opp-hz = /bits/ 64 <403200000>; + }; + opp-499200000 { + opp-hz = /bits/ 64 <499200000>; + }; + opp-595200000 { + opp-hz = /bits/ 64 <595200000>; + }; + opp-710400000 { + opp-hz = /bits/ 64 <710400000>; + }; + opp-806400000 { + opp-hz = /bits/ 64 <806400000>; + }; + opp-902400000 { + opp-hz = /bits/ 64 <902400000>; + }; + opp-1017600000 { + opp-hz = /bits/ 64 <1017600000>; + }; + opp-1113600000 { + opp-hz = /bits/ 64 <1113600000>; + }; + opp-1209600000 { + opp-hz = /bits/ 64 <1209600000>; + }; + opp-1324800000 { + opp-hz = /bits/ 64 <1324800000>; + }; + opp-1440000000 { + opp-hz = /bits/ 64 <1440000000>; + }; + opp-1555200000 { + opp-hz = /bits/ 64 <1555200000>; + }; + opp-1670400000 { + opp-hz = /bits/ 64 <1670400000>; + }; + opp-1785600000 { + opp-hz = /bits/ 64 <1785600000>; + }; + opp-1881600000 { + opp-hz = /bits/ 64 <1881600000>; + }; + opp-2016000000 { + opp-hz = /bits/ 64 <2016000000>; + }; + opp-2131200000 { + opp-hz = /bits/ 64 <2131200000>; + }; + opp-2246400000 { + opp-hz = /bits/ 64 <2246400000>; + }; + }; + + cpu4_opp_table: cpu4-opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-825600000 { + opp-hz = /bits/ 64 <825600000>; + }; + opp-940800000 { + opp-hz = /bits/ 64 <940800000>; + }; + opp-1056000000 { + opp-hz = /bits/ 64 <1056000000>; + }; + opp-1171200000 { + opp-hz = /bits/ 64 <1171200000>; + }; + opp-1286400000 { + opp-hz = /bits/ 64 <1286400000>; + }; + opp-1401600000 { + opp-hz = /bits/ 64 <1401600000>; + }; + opp-1516800000 { + opp-hz = /bits/ 64 <1516800000>; + }; + opp-1632000000 { + opp-hz = /bits/ 64 <1632000000>; + }; + opp-1747200000 { + opp-hz = /bits/ 64 <1747200000>; + }; + opp-1862400000 { + opp-hz = /bits/ 64 <1862400000>; + }; + opp-1977600000 { + opp-hz = /bits/ 64 <1977600000>; + }; + opp-2073600000 { + opp-hz = /bits/ 64 <2073600000>; + }; + opp-2169600000 { + opp-hz = /bits/ 64 <2169600000>; + }; + opp-2284800000 { + opp-hz = /bits/ 64 <2284800000>; + }; + opp-2380800000 { + opp-hz = /bits/ 64 <2380800000>; + }; + opp-2496000000 { + opp-hz = /bits/ 64 <2496000000>; + }; + opp-2592000000 { + opp-hz = /bits/ 64 <2592000000>; + }; + }; +}; + +&rpmhpd { + compatible = "qcom,sa8540p-rpmhpd"; +}; diff --git a/dts/src/arm64/qcom/sc7180-idp.dts b/dts/src/arm64/qcom/sc7180-idp.dts index acdb36f447..9dee131b1e 100644 --- a/dts/src/arm64/qcom/sc7180-idp.dts +++ b/dts/src/arm64/qcom/sc7180-idp.dts @@ -330,6 +330,7 @@ &dsi_phy { status = "okay"; + vdds-supply = <&vreg_l4a_0p8>; }; &mdp { @@ -389,7 +390,7 @@ pinctrl-names = "default","sleep"; pinctrl-0 = <&sdc2_on>; pinctrl-1 = <&sdc2_off>; - vmmc-supply = <&vreg_l9c_2p9>; + vmmc-supply = <&vreg_l9c_2p9>; vqmmc-supply = <&vreg_l6c_2p9>; cd-gpios = <&tlmm 69 GPIO_ACTIVE_LOW>; @@ -467,7 +468,7 @@ /* PINCTRL - additions to nodes defined in sc7180.dtsi */ &pm6150l_gpio { - disp_pins: disp-pins { + disp_pins: disp-state { pinconf { pins = "gpio3"; function = PMIC_GPIO_FUNC_FUNC1; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-coachz.dtsi b/dts/src/arm64/qcom/sc7180-trogdor-coachz.dtsi index 8ac1f1e610..7ee407f7b6 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor-coachz.dtsi +++ b/dts/src/arm64/qcom/sc7180-trogdor-coachz.dtsi @@ -81,6 +81,10 @@ }; &cros_ec { + keyboard-controller { + compatible = "google,cros-ec-keyb-switches"; + }; + cros_ec_proximity: proximity { compatible = "google,cros-ec-mkbp-proximity"; label = "proximity-wifi"; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-homestar.dtsi b/dts/src/arm64/qcom/sc7180-trogdor-homestar.dtsi index d1e2df5164..1bd6c7dcd9 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor-homestar.dtsi +++ b/dts/src/arm64/qcom/sc7180-trogdor-homestar.dtsi @@ -114,6 +114,12 @@ ap_ts_pen_1v8: &i2c4 { status = "okay"; }; +&cros_ec { + keyboard-controller { + compatible = "google,cros-ec-keyb-switches"; + }; +}; + &panel { compatible = "samsung,atna33xc20"; enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-kingoftown-r0.dts b/dts/src/arm64/qcom/sc7180-trogdor-kingoftown-r0.dts new file mode 100644 index 0000000000..1a62e8d435 --- /dev/null +++ b/dts/src/arm64/qcom/sc7180-trogdor-kingoftown-r0.dts @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Kingoftown board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-ti-sn65dsi86.dtsi" +#include "sc7180-trogdor-kingoftown.dtsi" + +/ { + model = "Google Kingoftown (rev0)"; + compatible = "google,kingoftown-rev0", "qcom,sc7180"; +}; + +/* + * In rev1+, the enable pin of pp3300_fp_tp will be tied to pp1800_l10a + * power rail instead, since kingoftown does not have FP. + */ +&pp3300_fp_tp { + gpio = <&tlmm 74 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&en_fp_rails>; +}; + +&tlmm { + en_fp_rails: en-fp-rails { + pinmux { + pins = "gpio74"; + function = "gpio"; + }; + + pinconf { + pins = "gpio74"; + drive-strength = <2>; + bias-disable; + }; + }; +}; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-kingoftown-r1.dts b/dts/src/arm64/qcom/sc7180-trogdor-kingoftown-r1.dts new file mode 100644 index 0000000000..e0752ba7df --- /dev/null +++ b/dts/src/arm64/qcom/sc7180-trogdor-kingoftown-r1.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Kingoftown board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-parade-ps8640.dtsi" +#include "sc7180-trogdor-kingoftown.dtsi" + +/ { + model = "Google Kingoftown (rev1+)"; + compatible = "google,kingoftown", "qcom,sc7180"; +}; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-kingoftown.dtsi b/dts/src/arm64/qcom/sc7180-trogdor-kingoftown.dtsi new file mode 100644 index 0000000000..74f0e07ea5 --- /dev/null +++ b/dts/src/arm64/qcom/sc7180-trogdor-kingoftown.dtsi @@ -0,0 +1,225 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Kingoftown board device tree source + * + * Copyright 2021 Google LLC. + */ + +/* This file must be included after sc7180-trogdor.dtsi */ +#include <arm/cros-ec-keyboard.dtsi> +#include "sc7180-trogdor-lte-sku.dtsi" + +&alc5682 { + compatible = "realtek,rt5682s"; + realtek,dmic1-clk-pin = <2>; + realtek,dmic-clk-rate-hz = <2048000>; +}; + +&ap_tp_i2c { + status = "okay"; +}; + +ap_ts_pen_1v8: &i2c4 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@10 { + compatible = "elan,ekth3500"; + reg = <0x10>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + + vcc33-supply = <&pp3300_ts>; + + reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; + }; +}; + +&keyboard_controller { + function-row-physmap = < + MATRIX_KEY(0x00, 0x02, 0) /* T1 */ + MATRIX_KEY(0x03, 0x02, 0) /* T2 */ + MATRIX_KEY(0x02, 0x02, 0) /* T3 */ + MATRIX_KEY(0x01, 0x02, 0) /* T4 */ + MATRIX_KEY(0x03, 0x04, 0) /* T5 */ + MATRIX_KEY(0x02, 0x04, 0) /* T6 */ + MATRIX_KEY(0x01, 0x04, 0) /* T7 */ + MATRIX_KEY(0x02, 0x09, 0) /* T8 */ + MATRIX_KEY(0x01, 0x09, 0) /* T9 */ + MATRIX_KEY(0x00, 0x04, 0) /* T10 */ + >; + linux,keymap = < + MATRIX_KEY(0x00, 0x02, KEY_BACK) + MATRIX_KEY(0x03, 0x02, KEY_REFRESH) + MATRIX_KEY(0x02, 0x02, KEY_ZOOM) + MATRIX_KEY(0x01, 0x02, KEY_SCALE) + MATRIX_KEY(0x03, 0x04, KEY_SYSRQ) + MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN) + MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP) + MATRIX_KEY(0x02, 0x09, KEY_MUTE) + MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN) + MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP) + + CROS_STD_MAIN_KEYMAP + >; +}; + +&panel { + compatible = "edp-panel"; +}; + +&pp3300_dx_edp { + gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>; +}; + +&sound { + compatible = "google,sc7180-trogdor"; + model = "sc7180-rt5682s-max98357a-1mic"; +}; + +&wifi { + qcom,ath10k-calibration-variant = "GO_KINGOFTOWN"; +}; + +/* PINCTRL - modifications to sc7180-trogdor.dtsi */ + +&en_pp3300_dx_edp { + pinmux { + pins = "gpio67"; + }; + + pinconf { + pins = "gpio67"; + }; +}; + +/* PINCTRL - board-specific pinctrl */ + +&tlmm { + gpio-line-names = "TP_INT_L", /* 0 */ + "AP_RAM_ID0", + "AP_SKU_ID2", + "AP_RAM_ID1", + "", + "AP_RAM_ID2", + "AP_TP_I2C_SDA", + "AP_TP_I2C_SCL", + "TS_RESET_L", + "TS_INT_L", + "", /* 10 */ + "EDP_BRIJ_IRQ", + "AP_EDP_BKLTEN", + "", + "", + "EDP_BRIJ_I2C_SDA", + "EDP_BRIJ_I2C_SCL", + "HUB_RST_L", + "", + "", + "", /* 20 */ + "", + "", + "AMP_EN", + "", + "", + "", + "", + "HP_IRQ", + "", + "", /* 30 */ + "AP_BRD_ID2", + "BRIJ_SUSPEND", + "AP_BRD_ID0", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + "AP_H1_SPI_CLK", + "AP_H1_SPI_CS_L", + "BT_UART_CTS", + "BT_UART_RTS", + "BT_UART_TXD", /* 40 */ + "BT_UART_RXD", + "H1_AP_INT_ODL", + "", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "HP_I2C_SDA", + "HP_I2C_SCL", + "FORCED_USB_BOOT", + "AMP_BCLK", + "AMP_LRCLK", /* 50 */ + "AMP_DIN", + "", + "HP_BCLK", + "HP_LRCLK", + "HP_DOUT", + "HP_DIN", + "HP_MCLK", + "AP_SKU_ID0", + "AP_EC_SPI_MISO", + "AP_EC_SPI_MOSI", /* 60 */ + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "AP_SPI_CLK", + "AP_SPI_MOSI", + "AP_SPI_MISO", + /* + * AP_FLASH_WP_L is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_L. + */ + "AP_FLASH_WP_L", + "EN_PP3300_DX_EDP", + "AP_SPI_CS0_L", + "", + "", /* 70 */ + "", + "", + "", + "EN_FP_RAILS", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RST", + "UIM2_PRESENT_L", + "UIM1_DATA", + "UIM1_CLK", /* 80 */ + "UIM1_RST", + "", + "CODEC_PWR_EN", + "HUB_EN", + "", + "", + "", + "", + "", + "AP_SKU_ID1", /* 90 */ + "AP_RST_REQ", + "", + "AP_BRD_ID1", + "AP_EC_INT_L", + "", + "", + "", + "", + "", + "", /* 100 */ + "", + "", + "", + "EDP_BRIJ_EN", + "", + "", + "", + "", + "", + "", /* 110 */ + "", + "", + "", + "", + "AP_TS_PEN_I2C_SDA", + "AP_TS_PEN_I2C_SCL", + "DP_HOT_PLUG_DET", + "EC_IN_RW_ODL"; +}; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-lazor.dtsi b/dts/src/arm64/qcom/sc7180-trogdor-lazor.dtsi index 88f6a7d4d0..2cf7d5212c 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor-lazor.dtsi +++ b/dts/src/arm64/qcom/sc7180-trogdor-lazor.dtsi @@ -6,6 +6,7 @@ */ /* This file must be included after sc7180-trogdor.dtsi */ +#include <arm/cros-ec-keyboard.dtsi> &ap_sar_sensor { semtech,cs0-ground; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-mrbland-rev0-auo.dts b/dts/src/arm64/qcom/sc7180-trogdor-mrbland-rev0-auo.dts new file mode 100644 index 0000000000..2767817fb0 --- /dev/null +++ b/dts/src/arm64/qcom/sc7180-trogdor-mrbland-rev0-auo.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Mrbland board device tree source + * + * Copyright 2021 Google LLC. + * + * SKU: 0x0 => 0 + * - bits 7..4: Panel ID: 0x0 (AUO) + */ + +/dts-v1/; + +#include "sc7180-trogdor-mrbland-rev0.dtsi" + +/ { + model = "Google Mrbland rev0 AUO panel board"; + compatible = "google,mrbland-rev0-sku0", "qcom,sc7180"; +}; + +&panel { + compatible = "auo,b101uan08.3"; +}; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-mrbland-rev0-boe.dts b/dts/src/arm64/qcom/sc7180-trogdor-mrbland-rev0-boe.dts new file mode 100644 index 0000000000..711485574a --- /dev/null +++ b/dts/src/arm64/qcom/sc7180-trogdor-mrbland-rev0-boe.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Mrbland board device tree source + * + * Copyright 2021 Google LLC. + * + * SKU: 0x10 => 16 + * - bits 7..4: Panel ID: 0x1 (BOE) + */ + +/dts-v1/; + +#include "sc7180-trogdor-mrbland-rev0.dtsi" + +/ { + model = "Google Mrbland rev0 BOE panel board"; + compatible = "google,mrbland-rev0-sku16", "qcom,sc7180"; +}; + +&panel { + compatible = "boe,tv101wum-n53"; +}; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-mrbland-rev0.dtsi b/dts/src/arm64/qcom/sc7180-trogdor-mrbland-rev0.dtsi new file mode 100644 index 0000000000..7bc8402c01 --- /dev/null +++ b/dts/src/arm64/qcom/sc7180-trogdor-mrbland-rev0.dtsi @@ -0,0 +1,53 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Mrbland board device tree source + * + * Copyright 2021 Google LLC. + * + */ + +/dts-v1/; + +#include "sc7180-trogdor-mrbland.dtsi" + +&avdd_lcd { + gpio = <&tlmm 80 GPIO_ACTIVE_HIGH>; +}; + +&panel { + enable-gpios = <&tlmm 76 GPIO_ACTIVE_HIGH>; +}; + +&v1p8_mipi { + gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>; +}; + +/* PINCTRL - modifications to sc7180-trogdor-mrbland.dtsi */ +&avdd_lcd_en { + pinmux { + pins = "gpio80"; + }; + + pinconf { + pins = "gpio80"; + }; +}; + +&mipi_1800_en { + pinmux { + pins = "gpio81"; + }; + + pinconf { + pins = "gpio81"; + }; +}; +&vdd_reset_1800 { + pinmux { + pins = "gpio76"; + }; + + pinconf { + pins = "gpio76"; + }; +}; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-mrbland-rev1-auo.dts b/dts/src/arm64/qcom/sc7180-trogdor-mrbland-rev1-auo.dts new file mode 100644 index 0000000000..275313ef75 --- /dev/null +++ b/dts/src/arm64/qcom/sc7180-trogdor-mrbland-rev1-auo.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Mrbland board device tree source + * + * Copyright 2021 Google LLC. + * + * SKU: 0x600 => 1536 + * - bits 11..8: Panel ID: 0x6 (AUO) + */ + +/dts-v1/; + +#include "sc7180-trogdor-mrbland.dtsi" + +/ { + model = "Google Mrbland rev1+ AUO panel board"; + compatible = "google,mrbland-sku1536", "qcom,sc7180"; +}; + +&panel { + compatible = "auo,b101uan08.3"; +}; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-mrbland-rev1-boe.dts b/dts/src/arm64/qcom/sc7180-trogdor-mrbland-rev1-boe.dts new file mode 100644 index 0000000000..87c6b6c30b --- /dev/null +++ b/dts/src/arm64/qcom/sc7180-trogdor-mrbland-rev1-boe.dts @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Mrbland board device tree source + * + * Copyright 2021 Google LLC. + * + * SKU: 0x300 => 768 + * - bits 11..8: Panel ID: 0x3 (BOE) + */ + +/dts-v1/; + +#include "sc7180-trogdor-mrbland.dtsi" + +/ { + model = "Google Mrbland (rev1 - 2) BOE panel board"; + /* Uses ID 768 on rev1 and 1024 on rev2+ */ + compatible = "google,mrbland-sku1024", "google,mrbland-sku768", + "qcom,sc7180"; +}; + +&panel { + compatible = "boe,tv101wum-n53"; +}; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-mrbland.dtsi b/dts/src/arm64/qcom/sc7180-trogdor-mrbland.dtsi new file mode 100644 index 0000000000..97cba7f806 --- /dev/null +++ b/dts/src/arm64/qcom/sc7180-trogdor-mrbland.dtsi @@ -0,0 +1,350 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Mrbland board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" + +/* This board only has 1 USB Type-C port. */ +/delete-node/ &usb_c1; + +/ { + avdd_lcd: avdd-lcd { + compatible = "regulator-fixed"; + regulator-name = "avdd_lcd"; + + gpio = <&tlmm 88 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&avdd_lcd_en>; + + vin-supply = <&pp5000_a>; + }; + + avee_lcd: avee-lcd { + compatible = "regulator-fixed"; + regulator-name = "avee_lcd"; + + gpio = <&tlmm 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&avee_lcd_en>; + + vin-supply = <&pp5000_a>; + }; + + v1p8_mipi: v1p8-mipi { + compatible = "regulator-fixed"; + regulator-name = "v1p8_mipi"; + + gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&mipi_1800_en>; + + vin-supply = <&pp3300_a>; + }; +}; + +&backlight { + pwms = <&cros_ec_pwm 0>; +}; + +&camcc { + status = "okay"; +}; + +&cros_ec { + keyboard-controller { + compatible = "google,cros-ec-keyb-switches"; + }; +}; + +&dsi0 { + + panel: panel@0 { + /* Compatible will be filled in per-board */ + reg = <0>; + enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vdd_reset_1800>; + avdd-supply = <&avdd_lcd>; + avee-supply = <&avee_lcd>; + pp1800-supply = <&v1p8_mipi>; + pp3300-supply = <&pp3300_dx_edp>; + backlight = <&backlight>; + rotation = <270>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; + + ports { + port@1 { + endpoint { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&gpio_keys { + status = "okay"; +}; + +&i2c4 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@5d { + compatible = "goodix,gt7375p"; + reg = <0x5d>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; + + vdd-supply = <&pp3300_ts>; + }; +}; + +&pp1800_uf_cam { + status = "okay"; +}; + +&pp1800_wf_cam { + status = "okay"; +}; + +&pp2800_uf_cam { + status = "okay"; +}; + +&pp2800_wf_cam { + status = "okay"; +}; + +&wifi { + qcom,ath10k-calibration-variant = "GO_MRBLAND"; +}; + +/* + * No eDP on this board but it's logically the same signal so just give it + * a new name and assign the proper GPIO. + */ +pp3300_disp_on: &pp3300_dx_edp { + gpio = <&tlmm 85 GPIO_ACTIVE_HIGH>; +}; + +/* PINCTRL - modifications to sc7180-trogdor.dtsi */ + +/* + * No eDP on this board but it's logically the same signal so just give it + * a new name and assign the proper GPIO. + */ + +tp_en: &en_pp3300_dx_edp { + pinmux { + pins = "gpio85"; + }; + + pinconf { + pins = "gpio85"; + }; +}; + +/* PINCTRL - board-specific pinctrl */ + +&tlmm { + gpio-line-names = "HUB_RST_L", + "AP_RAM_ID0", + "AP_SKU_ID2", + "AP_RAM_ID1", + "", + "AP_RAM_ID2", + "UF_CAM_EN", + "WF_CAM_EN", + "TS_RESET_L", + "TS_INT_L", + "", + "", + "AP_EDP_BKLTEN", + "UF_CAM_MCLK", + "WF_CAM_CLK", + "", + "", + "UF_CAM_SDA", + "UF_CAM_SCL", + "WF_CAM_SDA", + "WF_CAM_SCL", + "AVEE_LCD_EN", + "", + "AMP_EN", + "", + "", + "", + "", + "HP_IRQ", + "WF_CAM_RST_L", + "UF_CAM_RST_L", + "AP_BRD_ID2", + "", + "AP_BRD_ID0", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + "AP_H1_SPI_CLK", + "AP_H1_SPI_CS_L", + "BT_UART_CTS", + "BT_UART_RTS", + "BT_UART_TXD", + "BT_UART_RXD", + "H1_AP_INT_ODL", + "", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "HP_I2C_SDA", + "HP_I2C_SCL", + "FORCED_USB_BOOT", + "AMP_BCLK", + "AMP_LRCLK", + "AMP_DIN", + "PEN_DET_ODL", + "HP_BCLK", + "HP_LRCLK", + "HP_DOUT", + "HP_DIN", + "HP_MCLK", + "AP_SKU_ID0", + "AP_EC_SPI_MISO", + "AP_EC_SPI_MOSI", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "AP_SPI_CLK", + "AP_SPI_MOSI", + "AP_SPI_MISO", + /* + * AP_FLASH_WP_L is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_L. + */ + "AP_FLASH_WP_L", + "", + "AP_SPI_CS0_L", + "", + "", + "", + "", + "WLAN_SW_CTRL", + "", + "REPORT_E", + "", + "ID0", + "", + "ID1", + "", + "", + "", + "CODEC_PWR_EN", + "HUB_EN", + "TP_EN", + "MIPI_1.8V_EN", + "VDD_RESET_1.8V", + "AVDD_LCD_EN", + "", + "AP_SKU_ID1", + "AP_RST_REQ", + "", + "AP_BRD_ID1", + "AP_EC_INT_L", + "SDM_GRFC_3", + "", + "", + "BOOT_CONFIG_4", + "BOOT_CONFIG_2", + "", + "", + "", + "", + "", + "", + "", + "BOOT_CONFIG_3", + "WCI2_LTE_COEX_TXD", + "WCI2_LTE_COEX_RXD", + "", + "", + "", + "", + "FORCED_USB_BOOT_POL", + "AP_TS_PEN_I2C_SDA", + "AP_TS_PEN_I2C_SCL", + "DP_HOT_PLUG_DET", + "EC_IN_RW_ODL"; + + avdd_lcd_en: avdd-lcd-en { + pinmux { + pins = "gpio88"; + function = "gpio"; + }; + + pinconf { + pins = "gpio88"; + drive-strength = <2>; + bias-disable; + }; + }; + + avee_lcd_en: avee-lcd-en { + pinmux { + pins = "gpio21"; + function = "gpio"; + }; + + pinconf { + pins = "gpio21"; + drive-strength = <2>; + bias-disable; + }; + }; + + mipi_1800_en: mipi-1800-en { + pinmux { + pins = "gpio86"; + function = "gpio"; + }; + + pinconf { + pins = "gpio86"; + drive-strength = <2>; + bias-disable; + }; + }; + + vdd_reset_1800: vdd-reset-1800 { + pinmux { + pins = "gpio87"; + function = "gpio"; + }; + + pinconf { + pins = "gpio87"; + drive-strength = <2>; + bias-disable; + }; + }; +}; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-pazquel-lte-parade.dts b/dts/src/arm64/qcom/sc7180-trogdor-pazquel-lte-parade.dts new file mode 100644 index 0000000000..764c451c1a --- /dev/null +++ b/dts/src/arm64/qcom/sc7180-trogdor-pazquel-lte-parade.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Pazquel board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-parade-ps8640.dtsi" +#include "sc7180-trogdor-pazquel.dtsi" +#include "sc7180-trogdor-lte-sku.dtsi" + +/ { + model = "Google Pazquel (Parade,LTE)"; + compatible = "google,pazquel-sku4", "qcom,sc7180"; +}; + +&ap_sar_sensor_i2c { + status = "okay"; +}; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-pazquel-lte-ti.dts b/dts/src/arm64/qcom/sc7180-trogdor-pazquel-lte-ti.dts new file mode 100644 index 0000000000..9145b74e90 --- /dev/null +++ b/dts/src/arm64/qcom/sc7180-trogdor-pazquel-lte-ti.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Pazquel board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-ti-sn65dsi86.dtsi" +#include "sc7180-trogdor-pazquel.dtsi" +#include "sc7180-trogdor-lte-sku.dtsi" + +/ { + model = "Google Pazquel (TI,LTE)"; + compatible = "google,pazquel-sku0", "google,pazquel-sku2", "qcom,sc7180"; +}; + +&ap_sar_sensor_i2c { + status = "okay"; +}; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-pazquel-parade.dts b/dts/src/arm64/qcom/sc7180-trogdor-pazquel-parade.dts new file mode 100644 index 0000000000..9a0e6632a7 --- /dev/null +++ b/dts/src/arm64/qcom/sc7180-trogdor-pazquel-parade.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Pazquel board device tree source + * + * Copyright 2022 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-parade-ps8640.dtsi" +#include "sc7180-trogdor-pazquel.dtsi" + +/ { + model = "Google Pazquel (Parade)"; + compatible = "google,pazquel-sku5", "qcom,sc7180"; +}; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-pazquel-ti.dts b/dts/src/arm64/qcom/sc7180-trogdor-pazquel-ti.dts new file mode 100644 index 0000000000..47c5970d8c --- /dev/null +++ b/dts/src/arm64/qcom/sc7180-trogdor-pazquel-ti.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Pazquel board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-ti-sn65dsi86.dtsi" +#include "sc7180-trogdor-pazquel.dtsi" + +/ { + model = "Google Pazquel (TI)"; + compatible = "google,pazquel-sku1", "qcom,sc7180"; +}; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-pazquel.dtsi b/dts/src/arm64/qcom/sc7180-trogdor-pazquel.dtsi new file mode 100644 index 0000000000..56d787785f --- /dev/null +++ b/dts/src/arm64/qcom/sc7180-trogdor-pazquel.dtsi @@ -0,0 +1,222 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Pazquel board device tree source + * + * Copyright 2021 Google LLC. + */ + +/* This file must be included after sc7180-trogdor.dtsi */ +#include <arm/cros-ec-keyboard.dtsi> + +&ap_sar_sensor { + compatible = "semtech,sx9324"; + semtech,ph0-pin = <1 3 3>; + semtech,ph1-pin = <3 1 3>; + semtech,ph2-pin = <1 3 3>; + semtech,ph3-pin = <0 0 0>; + semtech,ph01-resolution = <1024>; + semtech,ph23-resolution = <1024>; + semtech,startup-sensor = <1>; + semtech,ph01-proxraw-strength = <3>; + semtech,ph23-proxraw-strength = <1>; + semtech,avg-pos-strength = <128>; + semtech,input-analog-gain = <0>; + semtech,cs-idle-sleep = "gnd"; + + /delete-property/ svdd-supply; + vdd-supply = <&pp1800_prox>; +}; + +/delete-node/&trackpad; +&ap_tp_i2c { + status = "okay"; + trackpad: trackpad@15 { + compatible = "hid-over-i2c"; + reg = <0x15>; + pinctrl-names = "default"; + pinctrl-0 = <&tp_int_odl>; + + interrupt-parent = <&tlmm>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + + vcc-supply = <&pp3300_fp_tp>; + post-power-on-delay-ms = <100>; + hid-descr-addr = <0x0001>; + + wakeup-source; + }; +}; + +&keyboard_controller { + function-row-physmap = < + MATRIX_KEY(0x00, 0x02, 0) /* T1 */ + MATRIX_KEY(0x03, 0x02, 0) /* T2 */ + MATRIX_KEY(0x02, 0x02, 0) /* T3 */ + MATRIX_KEY(0x01, 0x02, 0) /* T4 */ + MATRIX_KEY(0x03, 0x04, 0) /* T5 */ + MATRIX_KEY(0x02, 0x04, 0) /* T6 */ + MATRIX_KEY(0x01, 0x04, 0) /* T7 */ + MATRIX_KEY(0x02, 0x09, 0) /* T8 */ + MATRIX_KEY(0x01, 0x09, 0) /* T9 */ + MATRIX_KEY(0x00, 0x04, 0) /* T10 */ + >; + linux,keymap = < + MATRIX_KEY(0x00, 0x02, KEY_BACK) + MATRIX_KEY(0x03, 0x02, KEY_REFRESH) + MATRIX_KEY(0x02, 0x02, KEY_ZOOM) + MATRIX_KEY(0x01, 0x02, KEY_SCALE) + MATRIX_KEY(0x03, 0x04, KEY_SYSRQ) + MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN) + MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP) + MATRIX_KEY(0x02, 0x09, KEY_MUTE) + MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN) + MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP) + CROS_STD_MAIN_KEYMAP + >; +}; + +&panel { + compatible = "edp-panel"; +}; + +&pp3300_dx_edp { + gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>; +}; + +&en_pp3300_dx_edp { + pinmux { + pins = "gpio67"; + }; + + pinconf { + pins = "gpio67"; + }; +}; + +/* PINCTRL - board-specific pinctrl */ + +&tlmm { + gpio-line-names = "TP_INT_ODL", + "AP_RAM_ID0", + "AP_SKU_ID2", + "AP_RAM_ID1", + "", + "AP_RAM_ID2", + "AP_TP_I2C_SDA", + "AP_TP_I2C_SCL", + "TS_RESET_L", + "TS_INT_L", + "", + "EDP_BRIJ_IRQ", + "AP_EDP_BKLTEN", + "", + "", + "EDP_BRIJ_I2C_SDA", + "EDP_BRIJ_I2C_SCL", + "HUB_RST_L", + "", + "", + "", + "", + "", + "AMP_EN", + "P_SENSOR_INT_L", + "AP_SAR_SENSOR_SDA", + "AP_SAR_SENSOR_SCL", + "", + "HP_IRQ", + "", + "", + "AP_BRD_ID2", + "BRIJ_SUSPEND", + "AP_BRD_ID0", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + "AP_H1_SPI_CLK", + "AP_H1_SPI_CS_L", + "", + "", + "", + "", + "H1_AP_INT_ODL", + "", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "HP_I2C_SDA", + "HP_I2C_SCL", + "FORCED_USB_BOOT", + "AMP_BCLK", + "AMP_LRCLK", + "AMP_DIN", + "", + "HP_BCLK", + "HP_LRCLK", + "HP_DOUT", + "HP_DIN", + "HP_MCLK", + "AP_SKU_ID0", + "AP_EC_SPI_MISO", + "AP_EC_SPI_MOSI", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "AP_SPI_CLK", + "AP_SPI_MOSI", + "AP_SPI_MISO", + /* + * AP_FLASH_WP_L is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_L. + */ + "AP_FLASH_WP_L", + "EN_PP3300_DX_EDP", + "AP_SPI_CS0_L", + "", + "", + "", + "", + "", + "", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RST", + "UIM2_PRESENT", + "UIM1_DATA", + "UIM1_CLK", + "UIM1_RST", + "", + "CODEC_PWR_EN", + "HUB_EN", + "", + "", + "", + "", + "", + "AP_SKU_ID1", + "AP_RST_REQ", + "", + "AP_BRD_ID1", + "AP_EC_INT_L", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "EDP_BRIJ_EN", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "AP_TS_PEN_I2C_SDA", + "AP_TS_PEN_I2C_SCL", + "DP_HOT_PLUG_DET", + "EC_IN_RW_ODL"; +}; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-pompom.dtsi b/dts/src/arm64/qcom/sc7180-trogdor-pompom.dtsi index 3df4920295..a7582fb547 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor-pompom.dtsi +++ b/dts/src/arm64/qcom/sc7180-trogdor-pompom.dtsi @@ -6,6 +6,8 @@ */ #include "sc7180-trogdor.dtsi" +/* Must come after sc7180-trogdor.dtsi to modify cros_ec */ +#include <arm/cros-ec-keyboard.dtsi> #include "sc7180-trogdor-ti-sn65dsi86.dtsi" / { diff --git a/dts/src/arm64/qcom/sc7180-trogdor-quackingstick-r0-lte.dts b/dts/src/arm64/qcom/sc7180-trogdor-quackingstick-r0-lte.dts new file mode 100644 index 0000000000..35e8945fc5 --- /dev/null +++ b/dts/src/arm64/qcom/sc7180-trogdor-quackingstick-r0-lte.dts @@ -0,0 +1,38 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Quackingstick board device tree source + * + * Copyright 2021 Google LLC. + * + * SKU: 0x600 => 1536 + * - bits 11..8: Panel ID: 0x6 (AUO) + */ + +#include "sc7180-trogdor-quackingstick-r0.dts" +#include "sc7180-trogdor-lte-sku.dtsi" + +/ { + model = "Google Quackingstick (rev0+) with LTE"; + compatible = "google,quackingstick-sku1536", "qcom,sc7180"; +}; + +&ap_sar_sensor { + compatible = "semtech,sx9324"; + semtech,ph0-pin = <3 1 3>; + semtech,ph1-pin = <2 1 2>; + semtech,ph2-pin = <3 3 1>; + semtech,ph3-pin = <1 3 3>; + semtech,ph01-resolution = <1024>; + semtech,ph23-resolution = <1024>; + semtech,startup-sensor = <1>; + semtech,ph01-proxraw-strength = <3>; + semtech,ph23-proxraw-strength = <3>; + semtech,avg-pos-strength = <256>; + + /delete-property/ svdd-supply; + vdd-supply = <&pp1800_prox>; +}; + +&ap_sar_sensor_i2c { + status = "okay"; +}; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-quackingstick-r0.dts b/dts/src/arm64/qcom/sc7180-trogdor-quackingstick-r0.dts new file mode 100644 index 0000000000..5c81e44ed4 --- /dev/null +++ b/dts/src/arm64/qcom/sc7180-trogdor-quackingstick-r0.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Quackingstick board device tree source + * + * Copyright 2021 Google LLC. + * + * SKU: 0x601 => 1537 + * - bits 11..8: Panel ID: 0x6 (AUO) + */ + +#include "sc7180-trogdor-quackingstick.dtsi" + +/ { + model = "Google Quackingstick (rev0+)"; + compatible = "google,quackingstick-sku1537", "qcom,sc7180"; +}; + +&dsi_phy { + qcom,phy-rescode-offset-top = /bits/ 8 <(-13) (-13) (-13) (-13) (-13)>; + qcom,phy-rescode-offset-bot = /bits/ 8 <(-13) (-13) (-13) (-13) (-13)>; + qcom,phy-drive-ldo-level = <375>; +}; + +&panel { + compatible = "auo,b101uan08.3"; +}; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-quackingstick.dtsi b/dts/src/arm64/qcom/sc7180-trogdor-quackingstick.dtsi new file mode 100644 index 0000000000..695b04fe72 --- /dev/null +++ b/dts/src/arm64/qcom/sc7180-trogdor-quackingstick.dtsi @@ -0,0 +1,324 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Quackingstick board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" + +/* This board only has 1 USB Type-C port. */ +/delete-node/ &usb_c1; + +/ { + ppvar_lcd: ppvar-lcd { + compatible = "regulator-fixed"; + regulator-name = "ppvar_lcd"; + + gpio = <&tlmm 88 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&ppvar_lcd_en>; + + vin-supply = <&pp5000_a>; + }; + + v1p8_disp: v1p8-disp { + compatible = "regulator-fixed"; + regulator-name = "v1p8_disp"; + + gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&pp1800_disp_on>; + + vin-supply = <&pp3300_a>; + }; +}; + +&backlight { + pwms = <&cros_ec_pwm 0>; +}; + +&camcc { + status = "okay"; +}; + +&cros_ec { + keyboard-controller { + compatible = "google,cros-ec-keyb-switches"; + }; +}; + +&dsi0 { + panel: panel@0 { + /* Compatible will be filled in per-board */ + reg = <0>; + enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_rst>; + avdd-supply = <&ppvar_lcd>; + pp1800-supply = <&v1p8_disp>; + pp3300-supply = <&pp3300_dx_edp>; + backlight = <&backlight>; + rotation = <270>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; + + ports { + port@1 { + endpoint { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&gpio_keys { + status = "okay"; +}; + +&i2c4 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + + post-power-on-delay-ms = <20>; + hid-descr-addr = <0x0001>; + + vdd-supply = <&pp3300_ts>; + }; +}; + +&sdhc_2 { + status = "okay"; +}; + +&pp1800_uf_cam { + status = "okay"; +}; + +&pp1800_wf_cam { + status = "okay"; +}; + +&pp2800_uf_cam { + status = "okay"; +}; + +&pp2800_wf_cam { + status = "okay"; +}; + +/* + * No eDP on this board but it's logically the same signal so just give it + * a new name and assign the proper GPIO. + */ +pp3300_disp_on: &pp3300_dx_edp { + gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>; +}; + +/* PINCTRL - modifications to sc7180-trogdor.dtsi */ + +/* + * No eDP on this board but it's logically the same signal so just give it + * a new name and assign the proper GPIO. + */ + +tp_en: &en_pp3300_dx_edp { + pinmux { + pins = "gpio67"; + }; + + pinconf { + pins = "gpio67"; + }; +}; + +/* PINCTRL - board-specific pinctrl */ + +&tlmm { + gpio-line-names = "HUB_RST_L", + "AP_RAM_ID0", + "AP_SKU_ID2", + "AP_RAM_ID1", + "", + "AP_RAM_ID2", + "UF_CAM_EN", + "WF_CAM_EN", + "TS_RESET_L", + "TS_INT_L", + "", + "", + "AP_EDP_BKLTEN", + "UF_CAM_MCLK", + "WF_CAM_CLK", + "EDP_BRIJ_I2C_SDA", + "EDP_BRIJ_I2C_SCL", + "UF_CAM_SDA", + "UF_CAM_SCL", + "WF_CAM_SDA", + "WF_CAM_SCL", + "", + "", + "AMP_EN", + "P_SENSOR_INT_L", + "AP_SAR_SENSOR_SDA", + "AP_SAR_SENSOR_SCL", + "", + "HP_IRQ", + "WF_CAM_RST_L", + "UF_CAM_RST_L", + "AP_BRD_ID2", + "", + "AP_BRD_ID0", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + "AP_H1_SPI_CLK", + "AP_H1_SPI_CS_L", + "", + "", + "", + "", + "H1_AP_INT_ODL", + "", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "HP_I2C_SDA", + "HP_I2C_SCL", + "FORCED_USB_BOOT", + "", + "", + "AMP_DIN", + "PEN_DET_ODL", + "HP_BCLK", + "HP_LRCLK", + "HP_DOUT", + "HP_DIN", + "HP_MCLK", + "AP_SKU_ID0", + "AP_EC_SPI_MISO", + "AP_EC_SPI_MOSI", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "AP_SPI_CLK", + "AP_SPI_MOSI", + "AP_SPI_MISO", + /* + * AP_FLASH_WP_L is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_L. + */ + "AP_FLASH_WP_L", + "EN_PP3300_DX_EDP", + "AP_SPI_CS0_L", + "SD_CD_ODL", + "", + "", + "", + "", + "", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RST", + "UIM2_PRESENT_L", + "UIM1_DATA", + "UIM1_CLK", + "UIM1_RST", + "", + "CODEC_PWR_EN", + "HUB_EN", + "", + "PP1800_DISP_ON", + "LCD_RST", + "PPVAR_LCD_EN", + "", + "AP_SKU_ID1", + "AP_RST_REQ", + "", + "AP_BRD_ID1", + "AP_EC_INT_L", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "AP_TS_I2C_SDA", + "AP_TS_I2C_SCL", + "DP_HOT_PLUG_DET", + "EC_IN_RW_ODL"; + + lcd_rst: lcd-rst { + pinmux { + pins = "gpio87"; + function = "gpio"; + }; + + pinconf { + pins = "gpio87"; + drive-strength = <2>; + bias-disable; + }; + }; + + ppvar_lcd_en: ppvar-lcd-en { + pinmux { + pins = "gpio88"; + function = "gpio"; + }; + + pinconf { + pins = "gpio88"; + drive-strength = <2>; + bias-disable; + }; + }; + + pp1800_disp_on: pp1800-disp-on { + pinmux { + pins = "gpio86"; + function = "gpio"; + }; + + pinconf { + pins = "gpio86"; + drive-strength = <2>; + bias-disable; + }; + }; +}; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-r1.dts b/dts/src/arm64/qcom/sc7180-trogdor-r1.dts index 352827e574..59a23d0e96 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor-r1.dts +++ b/dts/src/arm64/qcom/sc7180-trogdor-r1.dts @@ -8,6 +8,8 @@ /dts-v1/; #include "sc7180-trogdor.dtsi" +/* Must come after sc7180-trogdor.dtsi to modify cros_ec */ +#include <arm/cros-ec-keyboard.dtsi> #include "sc7180-trogdor-ti-sn65dsi86.dtsi" / { diff --git a/dts/src/arm64/qcom/sc7180-trogdor-wormdingler-rev0-boe.dts b/dts/src/arm64/qcom/sc7180-trogdor-wormdingler-rev0-boe.dts new file mode 100644 index 0000000000..d6ed7d0afe --- /dev/null +++ b/dts/src/arm64/qcom/sc7180-trogdor-wormdingler-rev0-boe.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Wormdingler board device tree source + * + * Copyright 2021 Google LLC. + * + * SKU: 0x10 => 16 + * - bits 7..4: Panel ID: 0x1 (BOE) + */ + +/dts-v1/; + +#include "sc7180-trogdor-wormdingler-rev0.dtsi" + +/ { + model = "Google Wormdingler rev0 BOE panel board"; + compatible = "google,wormdingler-rev0-sku16", "qcom,sc7180"; +}; + +&panel { + compatible = "boe,tv110c9m-ll3"; +}; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-wormdingler-rev0-inx.dts b/dts/src/arm64/qcom/sc7180-trogdor-wormdingler-rev0-inx.dts new file mode 100644 index 0000000000..c03525ea64 --- /dev/null +++ b/dts/src/arm64/qcom/sc7180-trogdor-wormdingler-rev0-inx.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Wormdingler board device tree source + * + * Copyright 2021 Google LLC. + * + * SKU: 0x0 => 0 + * - bits 7..4: Panel ID: 0x0 (INX) + */ + +/dts-v1/; + +#include "sc7180-trogdor-wormdingler-rev0.dtsi" + +/ { + model = "Google Wormdingler rev0 INX panel board"; + compatible = "google,wormdingler-rev0-sku0", "qcom,sc7180"; +}; + +&panel { + compatible = "innolux,hj110iz-01a"; +}; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-wormdingler-rev0.dtsi b/dts/src/arm64/qcom/sc7180-trogdor-wormdingler-rev0.dtsi new file mode 100644 index 0000000000..db29e0cba2 --- /dev/null +++ b/dts/src/arm64/qcom/sc7180-trogdor-wormdingler-rev0.dtsi @@ -0,0 +1,53 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Wormdingler board device tree source + * + * Copyright 2021 Google LLC. + * + */ + +/dts-v1/; + +#include "sc7180-trogdor-wormdingler.dtsi" + +&avdd_lcd { + gpio = <&tlmm 80 GPIO_ACTIVE_HIGH>; +}; + +&panel { + enable-gpios = <&tlmm 76 GPIO_ACTIVE_HIGH>; +}; + +&v1p8_mipi { + gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>; +}; + +/* PINCTRL - modifications to sc7180-trogdor-wormdingler.dtsi */ +&avdd_lcd_en { + pinmux { + pins = "gpio80"; + }; + + pinconf { + pins = "gpio80"; + }; +}; + +&mipi_1800_en { + pinmux { + pins = "gpio81"; + }; + + pinconf { + pins = "gpio81"; + }; +}; +&vdd_reset_1800 { + pinmux { + pins = "gpio76"; + }; + + pinconf { + pins = "gpio76"; + }; +}; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dts b/dts/src/arm64/qcom/sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dts new file mode 100644 index 0000000000..aa605885c3 --- /dev/null +++ b/dts/src/arm64/qcom/sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Wormdingler board device tree source + * + * Copyright 2021 Google LLC. + * + * SKU: 0x401 => 1025 + * - bits 11..8: Panel ID: 0x4 (BOE) + */ + +/dts-v1/; + +#include "sc7180-trogdor-wormdingler-rev1-boe.dts" + +/ { + model = "Google Wormdingler rev1+ (BOE, rt5682s)"; + compatible = "google,wormdingler-sku1025", "qcom,sc7180"; +}; + +&alc5682 { + compatible = "realtek,rt5682s"; + realtek,dmic1-clk-pin = <2>; + realtek,dmic-clk-rate-hz = <2048000>; +}; + +&sound { + compatible = "google,sc7180-trogdor"; + model = "sc7180-rt5682s-max98357a-1mic"; +}; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-wormdingler-rev1-boe.dts b/dts/src/arm64/qcom/sc7180-trogdor-wormdingler-rev1-boe.dts new file mode 100644 index 0000000000..c5b0658bd6 --- /dev/null +++ b/dts/src/arm64/qcom/sc7180-trogdor-wormdingler-rev1-boe.dts @@ -0,0 +1,28 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Wormdingler board device tree source + * + * Copyright 2021 Google LLC. + * + * SKU: 0x400 => 1024 + * - bits 11..8: Panel ID: 0x4 (BOE) + */ + +/dts-v1/; + +#include "sc7180-trogdor-wormdingler.dtsi" + +/ { + model = "Google Wormdingler rev1+ BOE panel board"; + compatible = "google,wormdingler-sku1024", "qcom,sc7180"; +}; + +&dsi_phy { + qcom,phy-rescode-offset-top = /bits/ 8 <31 31 31 31 (-32)>; + qcom,phy-rescode-offset-bot = /bits/ 8 <31 31 31 31 (-32)>; + qcom,phy-drive-ldo-level = <450>; +}; + +&panel { + compatible = "boe,tv110c9m-ll3"; +}; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dts b/dts/src/arm64/qcom/sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dts new file mode 100644 index 0000000000..7116c44c8d --- /dev/null +++ b/dts/src/arm64/qcom/sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Wormdingler board device tree source + * + * Copyright 2021 Google LLC. + * + * SKU: 0x0001 => 1 + * - bits 11..8: Panel ID: 0x0 (INX) + */ + +/dts-v1/; + +#include "sc7180-trogdor-wormdingler-rev1-inx.dts" + +/ { + model = "Google Wormdingler rev1+ (INX, rt5682s)"; + compatible = "google,wormdingler-sku1", "qcom,sc7180"; +}; + +&alc5682 { + compatible = "realtek,rt5682s"; + realtek,dmic1-clk-pin = <2>; + realtek,dmic-clk-rate-hz = <2048000>; +}; + +&sound { + compatible = "google,sc7180-trogdor"; + model = "sc7180-rt5682s-max98357a-1mic"; +}; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-wormdingler-rev1-inx.dts b/dts/src/arm64/qcom/sc7180-trogdor-wormdingler-rev1-inx.dts new file mode 100644 index 0000000000..dd34a2297e --- /dev/null +++ b/dts/src/arm64/qcom/sc7180-trogdor-wormdingler-rev1-inx.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Wormdingler board device tree source + * + * Copyright 2021 Google LLC. + * + * SKU: 0x0000 => 0 + * - bits 11..8: Panel ID: 0x0 (INX) + */ + +/dts-v1/; + +#include "sc7180-trogdor-wormdingler.dtsi" + +/ { + model = "Google Wormdingler rev1+ INX panel board"; + compatible = "google,wormdingler-sku0", "qcom,sc7180"; +}; + +&panel { + compatible = "innolux,hj110iz-01a"; +}; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-wormdingler.dtsi b/dts/src/arm64/qcom/sc7180-trogdor-wormdingler.dtsi new file mode 100644 index 0000000000..6312108e8b --- /dev/null +++ b/dts/src/arm64/qcom/sc7180-trogdor-wormdingler.dtsi @@ -0,0 +1,412 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Wormdingler board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" + +/ { + avdd_lcd: avdd-lcd { + compatible = "regulator-fixed"; + regulator-name = "avdd_lcd"; + + gpio = <&tlmm 88 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&avdd_lcd_en>; + + vin-supply = <&pp5000_a>; + }; + + avee_lcd: avee-lcd { + compatible = "regulator-fixed"; + regulator-name = "avee_lcd"; + + gpio = <&tlmm 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&avee_lcd_en>; + + vin-supply = <&pp5000_a>; + }; + + pp1800_ts: + v1p8_mipi: v1p8-mipi { + compatible = "regulator-fixed"; + regulator-name = "v1p8_mipi"; + + gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&mipi_1800_en>; + + vin-supply = <&pp3300_a>; + }; + + thermal-zones { + skin_temp_thermal: skin-temp-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&pm6150_adc_tm 1>; + sustainable-power = <574>; + + trips { + skin_temp_alert0: trip-point0 { + temperature = <58000>; + hysteresis = <1000>; + type = "passive"; + }; + + skin_temp_alert1: trip-point1 { + temperature = <62500>; + hysteresis = <1000>; + type = "passive"; + }; + + skin-temp-crit { + temperature = <68000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&skin_temp_alert0>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + + map1 { + trip = <&skin_temp_alert1>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; +}; + +&backlight { + pwms = <&cros_ec_pwm 0>; +}; + +&camcc { + status = "okay"; +}; + +&cros_ec { + base_detection: cbas { + compatible = "google,cros-cbas"; + }; + + keyboard-controller { + compatible = "google,cros-ec-keyb-switches"; + }; +}; + +&dsi0 { + + panel: panel@0 { + reg = <0>; + enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vdd_reset_1800>; + avdd-supply = <&avdd_lcd>; + avee-supply = <&avee_lcd>; + pp1800-supply = <&v1p8_mipi>; + pp3300-supply = <&pp3300_dx_edp>; + backlight = <&backlight>; + rotation = <270>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; + + ports { + port@1 { + endpoint { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&i2c4 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@1 { + compatible = "hid-over-i2c"; + reg = <0x01>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_l>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + + post-power-on-delay-ms = <70>; + hid-descr-addr = <0x0001>; + + vdd-supply = <&pp3300_ts>; + vddl-supply = <&pp1800_ts>; + }; +}; + +&pm6150_adc { + skin-temp-thermistor@4d { + reg = <ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&pm6150_adc_tm { + status = "okay"; + + skin-temp-thermistor@1 { + reg = <1>; + io-channels = <&pm6150_adc ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pp1800_uf_cam { + status = "okay"; +}; + +&pp1800_wf_cam { + status = "okay"; +}; + +&pp2800_uf_cam { + status = "okay"; +}; + +&pp2800_wf_cam { + status = "okay"; +}; + +&wifi { + qcom,ath10k-calibration-variant = "GO_WORMDINGLER"; +}; + +/* + * No eDP on this board but it's logically the same signal so just give it + * a new name and assign the proper GPIO. + */ +pp3300_disp_on: &pp3300_dx_edp { + gpio = <&tlmm 85 GPIO_ACTIVE_HIGH>; +}; + +/* PINCTRL - modifications to sc7180-trogdor.dtsi */ + +/* + * No eDP on this board but it's logically the same signal so just give it + * a new name and assign the proper GPIO. + */ + +tp_en: &en_pp3300_dx_edp { + pinmux { + pins = "gpio85"; + }; + + pinconf { + pins = "gpio85"; + }; +}; + +/* PINCTRL - board-specific pinctrl */ + +&tlmm { + gpio-line-names = "HUB_RST_L", + "AP_RAM_ID0", + "AP_SKU_ID2", + "AP_RAM_ID1", + "", + "AP_RAM_ID2", + "UF_CAM_EN", + "WF_CAM_EN", + "TS_RESET_L", + "TS_INT_L", + "", + "", + "AP_EDP_BKLTEN", + "UF_CAM_MCLK", + "WF_CAM_CLK", + "", + "", + "UF_CAM_SDA", + "UF_CAM_SCL", + "WF_CAM_SDA", + "WF_CAM_SCL", + "AVEE_LCD_EN", + "", + "AMP_EN", + "", + "", + "", + "", + "HP_IRQ", + "WF_CAM_RST_L", + "UF_CAM_RST_L", + "AP_BRD_ID2", + "", + "AP_BRD_ID0", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + "AP_H1_SPI_CLK", + "AP_H1_SPI_CS_L", + "BT_UART_CTS", + "BT_UART_RTS", + "BT_UART_TXD", + "BT_UART_RXD", + "H1_AP_INT_ODL", + "", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "HP_I2C_SDA", + "HP_I2C_SCL", + "FORCED_USB_BOOT", + "AMP_BCLK", + "AMP_LRCLK", + "AMP_DIN", + "", + "HP_BCLK", + "HP_LRCLK", + "HP_DOUT", + "HP_DIN", + "HP_MCLK", + "AP_SKU_ID0", + "AP_EC_SPI_MISO", + "AP_EC_SPI_MOSI", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "AP_SPI_CLK", + "AP_SPI_MOSI", + "AP_SPI_MISO", + /* + * AP_FLASH_WP_L is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_L. + */ + "AP_FLASH_WP_L", + "", + "AP_SPI_CS0_L", + "", + "", + "", + "", + "WLAN_SW_CTRL", + "", + "REPORT_E", + "", + "ID0", + "", + "ID1", + "", + "", + "", + "CODEC_PWR_EN", + "HUB_EN", + "TP_EN", + "MIPI_1.8V_EN", + "VDD_RESET_1.8V", + "AVDD_LCD_EN", + "", + "AP_SKU_ID1", + "AP_RST_REQ", + "", + "AP_BRD_ID1", + "AP_EC_INT_L", + "SDM_GRFC_3", + "", + "", + "BOOT_CONFIG_4", + "BOOT_CONFIG_2", + "", + "", + "", + "", + "", + "", + "", + "BOOT_CONFIG_3", + "WCI2_LTE_COEX_TXD", + "WCI2_LTE_COEX_RXD", + "", + "", + "", + "", + "FORCED_USB_BOOT_POL", + "AP_TS_PEN_I2C_SDA", + "AP_TS_PEN_I2C_SCL", + "DP_HOT_PLUG_DET", + "EC_IN_RW_ODL"; + + avdd_lcd_en: avdd-lcd-en { + pinmux { + pins = "gpio88"; + function = "gpio"; + }; + + pinconf { + pins = "gpio88"; + drive-strength = <2>; + bias-disable; + }; + }; + + avee_lcd_en: avee-lcd-en { + pinmux { + pins = "gpio21"; + function = "gpio"; + }; + + pinconf { + pins = "gpio21"; + drive-strength = <2>; + bias-disable; + }; + }; + + mipi_1800_en: mipi-1800-en { + pinmux { + pins = "gpio86"; + function = "gpio"; + }; + + pinconf { + pins = "gpio86"; + drive-strength = <2>; + bias-disable; + }; + }; + + vdd_reset_1800: vdd-reset-1800 { + pinmux { + pins = "gpio87"; + function = "gpio"; + }; + + pinconf { + pins = "gpio87"; + drive-strength = <2>; + bias-disable; + }; + }; +}; diff --git a/dts/src/arm64/qcom/sc7180-trogdor.dtsi b/dts/src/arm64/qcom/sc7180-trogdor.dtsi index e55dbaa6dc..b5f534db13 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor.dtsi +++ b/dts/src/arm64/qcom/sc7180-trogdor.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/gpio-keys.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include <dt-bindings/sound/sc7180-lpass.h> @@ -43,6 +44,7 @@ */ /delete-node/ &hyp_mem; +/delete-node/ &ipa_fw_mem; /delete-node/ &xbl_mem; /delete-node/ &aop_mem; /delete-node/ &sec_apps_mem; @@ -330,7 +332,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pen_pdct_l>; - pen_insert: pen-insert { + pen_insert: switch-pen-insert { label = "Pen Insert"; /* Insert = low, eject = high */ @@ -355,6 +357,7 @@ keyboard_backlight: keyboard-backlight { status = "disabled"; label = "cros_ec::kbd_backlight"; + function = LED_FUNCTION_KBD_BACKLIGHT; pwms = <&cros_ec_pwm 0>; max-brightness = <1023>; }; @@ -812,8 +815,6 @@ hp_i2c: &i2c9 { pinctrl-names = "default"; pinctrl-0 = <&dp_hot_plug_det>; data-lanes = <0 1>; - vdda-1p2-supply = <&vdda_usb_ss_dp_1p2>; - vdda-0p9-supply = <&vdda_usb_ss_dp_core>; }; &pm6150_adc { @@ -903,7 +904,6 @@ ap_spi_fp: &spi10 { }; }; -#include <arm/cros-ec-keyboard.dtsi> #include <arm/cros-ec-sbs.dtsi> &uart3 { diff --git a/dts/src/arm64/qcom/sc7180.dtsi b/dts/src/arm64/qcom/sc7180.dtsi index 5dcaac23a1..b82c335c25 100644 --- a/dts/src/arm64/qcom/sc7180.dtsi +++ b/dts/src/arm64/qcom/sc7180.dtsi @@ -398,7 +398,7 @@ }; }; - cpu0_opp_table: cpu0_opp_table { + cpu0_opp_table: opp-table-cpu0 { compatible = "operating-points-v2"; opp-shared; @@ -453,7 +453,7 @@ }; }; - cpu6_opp_table: cpu6_opp_table { + cpu6_opp_table: opp-table-cpu6 { compatible = "operating-points-v2"; opp-shared; @@ -693,7 +693,7 @@ }; }; - sdhc_1: sdhci@7c4000 { + sdhc_1: mmc@7c4000 { compatible = "qcom,sc7180-sdhci", "qcom,sdhci-msm-v5"; reg = <0 0x7c4000 0 0x1000>, <0 0x07c5000 0 0x1000>; @@ -704,10 +704,10 @@ <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC1_APPS_CLK>, - <&gcc GCC_SDCC1_AHB_CLK>, + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, <&rpmhcc RPMH_CXO_CLK>; - clock-names = "core", "iface", "xo"; + clock-names = "iface", "core", "xo"; interconnects = <&aggre1_noc MASTER_EMMC 0 &mc_virt SLAVE_EBI1 0>, <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_EMMC_CFG 0>; interconnect-names = "sdhc-ddr","cpu-sdhc"; @@ -725,7 +725,7 @@ status = "disabled"; - sdhc1_opp_table: sdhc1-opp-table { + sdhc1_opp_table: opp-table { compatible = "operating-points-v2"; opp-100000000 { @@ -744,7 +744,7 @@ }; }; - qup_opp_table: qup-opp-table { + qup_opp_table: opp-table-qup { compatible = "operating-points-v2"; opp-75000000 { @@ -2048,7 +2048,7 @@ }; gmu: gmu@506a000 { - compatible="qcom,adreno-gmu-618.0", "qcom,adreno-gmu"; + compatible = "qcom,adreno-gmu-618.0", "qcom,adreno-gmu"; reg = <0 0x0506a000 0 0x31000>, <0 0x0b290000 0 0x10000>, <0 0x0b490000 0 0x10000>; reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq"; @@ -2578,7 +2578,7 @@ }; }; - sdhc_2: sdhci@8804000 { + sdhc_2: mmc@8804000 { compatible = "qcom,sc7180-sdhci", "qcom,sdhci-msm-v5"; reg = <0 0x08804000 0 0x1000>; @@ -2587,10 +2587,10 @@ <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC2_APPS_CLK>, - <&gcc GCC_SDCC2_AHB_CLK>, + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, <&rpmhcc RPMH_CXO_CLK>; - clock-names = "core", "iface", "xo"; + clock-names = "iface", "core", "xo"; interconnects = <&aggre1_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>, <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>; @@ -2602,7 +2602,7 @@ status = "disabled"; - sdhc2_opp_table: sdhc2-opp-table { + sdhc2_opp_table: opp-table { compatible = "operating-points-v2"; opp-100000000 { @@ -2621,7 +2621,7 @@ }; }; - qspi_opp_table: qspi-opp-table { + qspi_opp_table: opp-table-qspi { compatible = "operating-points-v2"; opp-75000000 { @@ -2825,7 +2825,7 @@ compatible = "venus-encoder"; }; - venus_opp_table: venus-opp-table { + venus_opp_table: opp-table { compatible = "operating-points-v2"; opp-150000000 { @@ -2896,9 +2896,6 @@ <&dispcc DISP_CC_MDSS_MDP_CLK>; clock-names = "iface", "ahb", "core"; - assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>; - assigned-clock-rates = <300000000>; - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <1>; @@ -2914,7 +2911,7 @@ status = "disabled"; - mdp: mdp@ae01000 { + mdp: display-controller@ae01000 { compatible = "qcom,sc7180-dpu"; reg = <0 0x0ae01000 0 0x8f000>, <0 0x0aeb0000 0 0x2008>; @@ -2928,12 +2925,10 @@ <&dispcc DISP_CC_MDSS_VSYNC_CLK>; clock-names = "bus", "iface", "rot", "lut", "core", "vsync"; - assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>, - <&dispcc DISP_CC_MDSS_VSYNC_CLK>, + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>, <&dispcc DISP_CC_MDSS_ROT_CLK>, <&dispcc DISP_CC_MDSS_AHB_CLK>; - assigned-clock-rates = <300000000>, - <19200000>, + assigned-clock-rates = <19200000>, <19200000>, <19200000>; operating-points-v2 = <&mdp_opp_table>; @@ -2963,7 +2958,7 @@ }; }; - mdp_opp_table: mdp-opp-table { + mdp_opp_table: opp-table { compatible = "operating-points-v2"; opp-200000000 { @@ -3042,7 +3037,7 @@ }; }; - dsi_opp_table: dsi-opp-table { + dsi_opp_table: opp-table { compatible = "operating-points-v2"; opp-187500000 { @@ -3085,7 +3080,11 @@ compatible = "qcom,sc7180-dp"; status = "disabled"; - reg = <0 0x0ae90000 0 0x1400>; + reg = <0 0xae90000 0 0x200>, + <0 0xae90200 0 0x200>, + <0 0xae90400 0 0xc00>, + <0 0xae91000 0 0x400>, + <0 0xae91400 0 0x400>; interrupt-parent = <&mdss>; interrupts = <12>; @@ -3097,7 +3096,6 @@ <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>; clock-names = "core_iface", "core_aux", "ctrl_link", "ctrl_link_iface", "stream_pixel"; - #clock-cells = <1>; assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>; assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>; @@ -3215,7 +3213,7 @@ }; aoss_qmp: power-controller@c300000 { - compatible = "qcom,sc7180-aoss-qmp"; + compatible = "qcom,sc7180-aoss-qmp", "qcom,aoss-qmp"; reg = <0 0x0c300000 0 0x400>; interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>; mboxes = <&apss_shared 0>; @@ -3247,8 +3245,8 @@ cell-index = <0>; }; - imem@146aa000 { - compatible = "simple-mfd"; + sram@146aa000 { + compatible = "qcom,sc7180-imem", "syscon", "simple-mfd"; reg = <0 0x146aa000 0 0x2000>; #address-cells = <1>; @@ -3384,9 +3382,9 @@ }; timer@17c20000{ - #address-cells = <2>; - #size-cells = <2>; - ranges; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0x20000000>; compatible = "arm,armv7-timer-mem"; reg = <0 0x17c20000 0 0x1000>; @@ -3394,49 +3392,49 @@ frame-number = <0>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; - reg = <0 0x17c21000 0 0x1000>, - <0 0x17c22000 0 0x1000>; + reg = <0x17c21000 0x1000>, + <0x17c22000 0x1000>; }; frame@17c23000 { frame-number = <1>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; - reg = <0 0x17c23000 0 0x1000>; + reg = <0x17c23000 0x1000>; status = "disabled"; }; frame@17c25000 { frame-number = <2>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - reg = <0 0x17c25000 0 0x1000>; + reg = <0x17c25000 0x1000>; status = "disabled"; }; frame@17c27000 { frame-number = <3>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - reg = <0 0x17c27000 0 0x1000>; + reg = <0x17c27000 0x1000>; status = "disabled"; }; frame@17c29000 { frame-number = <4>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - reg = <0 0x17c29000 0 0x1000>; + reg = <0x17c29000 0x1000>; status = "disabled"; }; frame@17c2b000 { frame-number = <5>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; - reg = <0 0x17c2b000 0 0x1000>; + reg = <0x17c2b000 0x1000>; status = "disabled"; }; frame@17c2d000 { frame-number = <6>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; - reg = <0 0x17c2d000 0 0x1000>; + reg = <0x17c2d000 0x1000>; status = "disabled"; }; }; @@ -3584,7 +3582,7 @@ compatible = "qcom,sc7180-lpass-cpu"; reg = <0 0x62d87000 0 0x68000>, <0 0x62f00000 0 0x29000>; - reg-names = "lpass-hdmiif", "lpass-lpaif"; + reg-names = "lpass-hdmiif", "lpass-lpaif"; iommus = <&apps_smmu 0x1020 0>, <&apps_smmu 0x1021 0>, diff --git a/dts/src/arm64/qcom/sc7280-chrome-common.dtsi b/dts/src/arm64/qcom/sc7280-chrome-common.dtsi index 9f4a9c263c..cfe2741456 100644 --- a/dts/src/arm64/qcom/sc7280-chrome-common.dtsi +++ b/dts/src/arm64/qcom/sc7280-chrome-common.dtsi @@ -88,10 +88,26 @@ status = "okay"; compatible = "qcom,sc7280-mss-pil"; iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>; + interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>; memory-region = <&mba_mem>, <&mpss_mem>; + firmware-name = "qcom/sc7280-herobrine/modem/mba.mbn", + "qcom/sc7280-herobrine/modem/qdsp6sw.mbn"; +}; + +&remoteproc_wpss { + status = "okay"; + firmware-name = "ath11k/WCN6750/hw1.0/wpss.mdt"; }; /* Increase the size from 2.5MB to 8MB */ &rmtfs_mem { reg = <0x0 0x9c900000 0x0 0x800000>; }; + +&wifi { + status = "okay"; + + wifi-firmware { + iommus = <&apps_smmu 0x1c02 0x1>; + }; +}; diff --git a/dts/src/arm64/qcom/sc7280-herobrine-audio-wcd9385.dtsi b/dts/src/arm64/qcom/sc7280-herobrine-audio-wcd9385.dtsi new file mode 100644 index 0000000000..859faaa8b7 --- /dev/null +++ b/dts/src/arm64/qcom/sc7280-herobrine-audio-wcd9385.dtsi @@ -0,0 +1,84 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * sc7280 device tree source for boards using Max98360 and wcd9385 codec + * + * Copyright (c) 2022, The Linux Foundation. All rights reserved. + */ + +/* PINCTRL */ + +&lpass_dmic01_clk { + drive-strength = <8>; + bias-disable; +}; + +&lpass_dmic01_clk_sleep { + drive-strength = <2>; +}; + +&lpass_dmic01_data { + bias-pull-down; +}; + +&lpass_dmic23_clk { + drive-strength = <8>; + bias-disable; +}; + +&lpass_dmic23_clk_sleep { + drive-strength = <2>; +}; + +&lpass_dmic23_data { + bias-pull-down; +}; + +&lpass_rx_swr_clk { + drive-strength = <2>; + slew-rate = <1>; + bias-disable; +}; + +&lpass_rx_swr_clk_sleep { + bias-pull-down; +}; + +&lpass_rx_swr_data { + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; +}; + +&lpass_rx_swr_data_sleep { + bias-pull-down; +}; + +&lpass_tx_swr_clk { + drive-strength = <2>; + slew-rate = <1>; + bias-disable; +}; + +&lpass_tx_swr_clk_sleep { + bias-pull-down; +}; + +&lpass_tx_swr_data { + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; +}; + +&mi2s1_data0 { + drive-strength = <6>; + bias-disable; +}; + +&mi2s1_sclk { + drive-strength = <6>; + bias-disable; +}; + +&mi2s1_ws { + drive-strength = <6>; +}; diff --git a/dts/src/arm64/qcom/sc7280-herobrine-crd.dts b/dts/src/arm64/qcom/sc7280-herobrine-crd.dts index a4ac33c4fd..7881bbc641 100644 --- a/dts/src/arm64/qcom/sc7280-herobrine-crd.dts +++ b/dts/src/arm64/qcom/sc7280-herobrine-crd.dts @@ -8,6 +8,7 @@ /dts-v1/; #include "sc7280-herobrine.dtsi" +#include "sc7280-herobrine-audio-wcd9385.dtsi" / { model = "Qualcomm Technologies, Inc. sc7280 CRD platform (rev5+)"; @@ -134,6 +135,17 @@ ap_ts_pen_1v8: &i2c13 { status = "okay"; }; +/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */ + +/* + * This pin goes to the display panel but then doesn't actually do anything + * on the panel itself (it doesn't connect to the touchscreen controller). + * We'll set a pullup here just to park the line. + */ +&ts_rst_conn { + bias-pull-up; +}; + /* PINCTRL - BOARD-SPECIFIC */ /* diff --git a/dts/src/arm64/qcom/sc7280-herobrine-herobrine-r1.dts b/dts/src/arm64/qcom/sc7280-herobrine-herobrine-r1.dts index b69ca09d9b..c1647a85a3 100644 --- a/dts/src/arm64/qcom/sc7280-herobrine-herobrine-r1.dts +++ b/dts/src/arm64/qcom/sc7280-herobrine-herobrine-r1.dts @@ -128,6 +128,17 @@ ts_i2c: &i2c13 { status = "okay"; }; +/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */ + +/* + * This pin goes to the display panel but then doesn't actually do anything + * on the panel itself (it doesn't connect to the touchscreen controller). + * We'll set a pullup here just to park the line. + */ +&ts_rst_conn { + bias-pull-up; +}; + /* PINCTRL - BOARD-SPECIFIC */ /* diff --git a/dts/src/arm64/qcom/sc7280-herobrine-villager-r0.dts b/dts/src/arm64/qcom/sc7280-herobrine-villager-r0.dts index d3d6ffad4e..2cacafd8fa 100644 --- a/dts/src/arm64/qcom/sc7280-herobrine-villager-r0.dts +++ b/dts/src/arm64/qcom/sc7280-herobrine-villager-r0.dts @@ -46,6 +46,25 @@ ap_tp_i2c: &i2c0 { }; }; +ts_i2c: &i2c13 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@10 { + compatible = "elan,ekth6915"; + reg = <0x10>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_conn>, <&ts_rst_conn>; + + interrupt-parent = <&tlmm>; + interrupts = <55 IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>; + + vcc33-supply = <&ts_avdd>; + }; +}; + &ap_sar_sensor_i2c { status = "okay"; }; @@ -76,11 +95,21 @@ ap_tp_i2c: &i2c0 { status = "okay"; }; +&pwmleds { + status = "okay"; +}; + /* For eMMC */ &sdhc_1 { status = "okay"; }; +/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */ + +&ts_rst_conn { + bias-disable; +}; + /* PINCTRL - BOARD-SPECIFIC */ /* diff --git a/dts/src/arm64/qcom/sc7280-herobrine.dtsi b/dts/src/arm64/qcom/sc7280-herobrine.dtsi index 9cb1bc8ed6..3f8996c00b 100644 --- a/dts/src/arm64/qcom/sc7280-herobrine.dtsi +++ b/dts/src/arm64/qcom/sc7280-herobrine.dtsi @@ -15,6 +15,7 @@ #include <dt-bindings/input/gpio-keys.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> #include "sc7280-qcard.dtsi" #include "sc7280-chrome-common.dtsi" @@ -295,12 +296,12 @@ /* BOARD-SPECIFIC TOP LEVEL NODES */ - pwmleds { + pwmleds: pwmleds { compatible = "pwm-leds"; status = "disabled"; keyboard_backlight: keyboard-backlight { - status = "disabled"; label = "cros_ec::kbd_backlight"; + function = LED_FUNCTION_KBD_BACKLIGHT; pwms = <&cros_ec_pwm 0>; max-brightness = <1023>; }; @@ -388,7 +389,7 @@ ap_sar_sensor_i2c: &i2c1 { vdd-supply = <&pp1800_prox>; - label = "proximity-wifi-lte0"; + label = "proximity-wifi_cellular-0"; status = "disabled"; }; @@ -404,7 +405,7 @@ ap_sar_sensor_i2c: &i2c1 { vdd-supply = <&pp1800_prox>; - label = "proximity-wifi-lte1"; + label = "proximity-wifi_cellular-1"; status = "disabled"; }; }; @@ -429,6 +430,13 @@ ap_i2c_tpm: &i2c14 { status = "okay"; }; +&mdss_dp { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dp_hot_plug_det>; + data-lanes = <0 1>; +}; + &mdss_mdp { status = "okay"; }; @@ -476,6 +484,10 @@ ap_i2c_tpm: &i2c14 { cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>; }; +&spi_flash { + spi-max-frequency = <50000000>; +}; + /* Fingerprint, enabled on a per-board basis */ ap_spi_fp: &spi9 { pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs_gpio_init_high>, <&qup_spi9_cs_gpio>; diff --git a/dts/src/arm64/qcom/sc7280-idp.dtsi b/dts/src/arm64/qcom/sc7280-idp.dtsi index 5eb668991e..a74e0b730d 100644 --- a/dts/src/arm64/qcom/sc7280-idp.dtsi +++ b/dts/src/arm64/qcom/sc7280-idp.dtsi @@ -27,7 +27,7 @@ pinctrl-names = "default"; pinctrl-0 = <&key_vol_up_default>; - volume-up { + key-volume-up { label = "volume_up"; gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>; linux,input-type = <1>; @@ -367,8 +367,84 @@ bias-disable; }; +&lpass_dmic01_clk { + drive-strength = <8>; + bias-disable; +}; + +&lpass_dmic01_clk_sleep { + drive-strength = <2>; +}; + +&lpass_dmic01_data { + bias-pull-down; +}; + +&lpass_dmic23_clk { + drive-strength = <8>; + bias-disable; +}; + +&lpass_dmic23_clk_sleep { + drive-strength = <2>; +}; + +&lpass_dmic23_data { + bias-pull-down; +}; + +&lpass_rx_swr_clk { + drive-strength = <2>; + slew-rate = <1>; + bias-disable; +}; + +&lpass_rx_swr_clk_sleep { + bias-pull-down; +}; + +&lpass_rx_swr_data { + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; +}; + +&lpass_rx_swr_data_sleep { + bias-pull-down; +}; + +&lpass_tx_swr_clk { + drive-strength = <2>; + slew-rate = <1>; + bias-disable; +}; + +&lpass_tx_swr_clk_sleep { + bias-pull-down; +}; + +&lpass_tx_swr_data { + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; +}; + +&mi2s1_data0 { + drive-strength = <6>; + bias-disable; +}; + +&mi2s1_sclk { + drive-strength = <6>; + bias-disable; +}; + +&mi2s1_ws { + drive-strength = <6>; +}; + &pm7325_gpios { - key_vol_up_default: key-vol-up-default { + key_vol_up_default: key-vol-up-state { pins = "gpio6"; function = "normal"; input-enable; @@ -560,14 +636,3 @@ bias-pull-down; }; }; - -&remoteproc_wpss { - status = "okay"; -}; - -&wifi { - status = "okay"; - wifi-firmware { - iommus = <&apps_smmu 0x1c02 0x1>; - }; -}; diff --git a/dts/src/arm64/qcom/sc7280-qcard.dtsi b/dts/src/arm64/qcom/sc7280-qcard.dtsi index d59002d449..7adf31bb98 100644 --- a/dts/src/arm64/qcom/sc7280-qcard.dtsi +++ b/dts/src/arm64/qcom/sc7280-qcard.dtsi @@ -123,6 +123,12 @@ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; + vreg_l17b_1p8: ldo17 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + vdd_px_wcd9385: vdd_txrx: vddpx_0: @@ -305,9 +311,6 @@ /* NOTE: Not all Qcards have eDP connector stuffed */ &mdss_edp { - vdda-0p9-supply = <&vdd_a_edp_0_0p9>; - vdda-1p2-supply = <&vdd_a_edp_0_1p2>; - aux-bus { edp_panel: panel { compatible = "edp-panel"; @@ -517,7 +520,7 @@ mos_bt_uart: &uart7 { */ &pm8350c_gpios { - pmic_edp_bl_en: pmic-edp-bl-en { + pmic_edp_bl_en: pmic-edp-bl-en-state { pins = "gpio7"; function = "normal"; bias-disable; @@ -527,7 +530,7 @@ mos_bt_uart: &uart7 { output-low; }; - pmic_edp_bl_pwm: pmic-edp-bl-pwm { + pmic_edp_bl_pwm: pmic-edp-bl-pwm-state { pins = "gpio8"; function = "func1"; bias-disable; @@ -604,7 +607,6 @@ mos_bt_uart: &uart7 { ts_rst_conn: ts-rst-conn { pins = "gpio54"; function = "gpio"; - bias-pull-up; drive-strength = <2>; }; }; diff --git a/dts/src/arm64/qcom/sc7280.dtsi b/dts/src/arm64/qcom/sc7280.dtsi index e66fc67de2..13d7f267b2 100644 --- a/dts/src/arm64/qcom/sc7280.dtsi +++ b/dts/src/arm64/qcom/sc7280.dtsi @@ -417,7 +417,7 @@ }; }; - cpu0_opp_table: cpu0-opp-table { + cpu0_opp_table: opp-table-cpu0 { compatible = "operating-points-v2"; opp-shared; @@ -477,7 +477,7 @@ }; }; - cpu4_opp_table: cpu4-opp-table { + cpu4_opp_table: opp-table-cpu4 { compatible = "operating-points-v2"; opp-shared; @@ -547,7 +547,7 @@ }; }; - cpu7_opp_table: cpu7-opp-table { + cpu7_opp_table: opp-table-cpu7 { compatible = "operating-points-v2"; opp-shared; @@ -763,7 +763,7 @@ method = "smc"; }; - qspi_opp_table: qspi-opp-table { + qspi_opp_table: opp-table-qspi { compatible = "operating-points-v2"; opp-75000000 { @@ -787,7 +787,7 @@ }; }; - qup_opp_table: qup-opp-table { + qup_opp_table: opp-table-qup { compatible = "operating-points-v2"; opp-75000000 { @@ -818,7 +818,7 @@ reg = <0 0x00100000 0 0x1f0000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>, - <0>, <&pcie1_lane 0>, + <0>, <&pcie1_lane>, <0>, <0>, <0>, <0>; clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk", "pcie_0_pipe_clk", "pcie_1_pipe_clk", @@ -857,7 +857,7 @@ }; }; - sdhc_1: sdhci@7c4000 { + sdhc_1: mmc@7c4000 { compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&sdc1_clk>, <&sdc1_cmd>, <&sdc1_data>, <&sdc1_rclk>; @@ -873,10 +873,10 @@ <GIC_SPI 656 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC1_APPS_CLK>, - <&gcc GCC_SDCC1_AHB_CLK>, + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, <&rpmhcc RPMH_CXO_CLK>; - clock-names = "core", "iface", "xo"; + clock-names = "iface", "core", "xo"; interconnects = <&aggre1_noc MASTER_SDCC_1 0 &mc_virt SLAVE_EBI1 0>, <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_SDCC_1 0>; interconnect-names = "sdhc-ddr","cpu-sdhc"; @@ -2035,7 +2035,7 @@ clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, <&gcc GCC_PCIE_1_PIPE_CLK_SRC>, - <&pcie1_lane 0>, + <&pcie1_lane>, <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_PCIE_1_AUX_CLK>, <&gcc GCC_PCIE_1_CFG_AHB_CLK>, @@ -2110,7 +2110,7 @@ clock-names = "pipe0"; #phy-cells = <0>; - #clock-cells = <1>; + #clock-cells = <0>; clock-output-names = "pcie_1_pipe_clk"; }; }; @@ -2201,7 +2201,7 @@ lpasscore: clock-controller@3900000 { compatible = "qcom,sc7280-lpasscorecc"; reg = <0 0x03900000 0 0x50000>; - clocks = <&rpmhcc RPMH_CXO_CLK>; + clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "bi_tcxo"; power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>; #clock-cells = <1>; @@ -2224,6 +2224,98 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; + lpass_tlmm: pinctrl@33c0000 { + compatible = "qcom,sc7280-lpass-lpi-pinctrl"; + reg = <0 0x033c0000 0x0 0x20000>, + <0 0x03550000 0x0 0x10000>; + qcom,adsp-bypass-mode; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 15>; + + #clock-cells = <1>; + + lpass_dmic01_clk: dmic01-clk { + pins = "gpio6"; + function = "dmic1_clk"; + }; + + lpass_dmic01_clk_sleep: dmic01-clk-sleep { + pins = "gpio6"; + function = "dmic1_clk"; + }; + + lpass_dmic01_data: dmic01-data { + pins = "gpio7"; + function = "dmic1_data"; + }; + + lpass_dmic01_data_sleep: dmic01-data-sleep { + pins = "gpio7"; + function = "dmic1_data"; + }; + + lpass_dmic23_clk: dmic23-clk { + pins = "gpio8"; + function = "dmic2_clk"; + }; + + lpass_dmic23_clk_sleep: dmic23-clk-sleep { + pins = "gpio8"; + function = "dmic2_clk"; + }; + + lpass_dmic23_data: dmic23-data { + pins = "gpio9"; + function = "dmic2_data"; + }; + + lpass_dmic23_data_sleep: dmic23-data-sleep { + pins = "gpio9"; + function = "dmic2_data"; + }; + + lpass_rx_swr_clk: rx-swr-clk { + pins = "gpio3"; + function = "swr_rx_clk"; + }; + + lpass_rx_swr_clk_sleep: rx-swr-clk-sleep { + pins = "gpio3"; + function = "swr_rx_clk"; + }; + + lpass_rx_swr_data: rx-swr-data { + pins = "gpio4", "gpio5"; + function = "swr_rx_data"; + }; + + lpass_rx_swr_data_sleep: rx-swr-data-sleep { + pins = "gpio4", "gpio5"; + function = "swr_rx_data"; + }; + + lpass_tx_swr_clk: tx-swr-clk { + pins = "gpio0"; + function = "swr_tx_clk"; + }; + + lpass_tx_swr_clk_sleep: tx-swr-clk-sleep { + pins = "gpio0"; + function = "swr_tx_clk"; + }; + + lpass_tx_swr_data: tx-swr-data { + pins = "gpio1", "gpio2", "gpio14"; + function = "swr_tx_data"; + }; + + lpass_tx_swr_data_sleep: tx-swr-data-sleep { + pins = "gpio1", "gpio2", "gpio14"; + function = "swr_tx_data"; + }; + }; + gpu: gpu@3d00000 { compatible = "qcom,adreno-635.0", "qcom,adreno"; reg = <0 0x03d00000 0 0x40000>, @@ -2305,7 +2397,7 @@ }; gmu: gmu@3d6a000 { - compatible="qcom,adreno-gmu-635.0", "qcom,adreno-gmu"; + compatible = "qcom,adreno-gmu-635.0", "qcom,adreno-gmu"; reg = <0 0x03d6a000 0 0x34000>, <0 0x3de0000 0 0x10000>, <0 0x0b290000 0 0x10000>; @@ -2313,13 +2405,13 @@ interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hfi", "gmu"; - clocks = <&gpucc 5>, - <&gpucc 8>, - <&gcc GCC_DDRSS_GPU_AXI_CLK>, - <&gcc GCC_GPU_MEMNOC_GFX_CLK>, - <&gpucc 2>, - <&gpucc 15>, - <&gpucc 11>; + clocks = <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_CXO_CLK>, + <&gcc GCC_DDRSS_GPU_AXI_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gpucc GPU_CC_AHB_CLK>, + <&gpucc GPU_CC_HUB_CX_INT_CLK>, + <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>; clock-names = "gmu", "cxo", "axi", @@ -2327,8 +2419,8 @@ "ahb", "hub", "smmu_vote"; - power-domains = <&gpucc 0>, - <&gpucc 1>; + power-domains = <&gpucc GPU_CC_CX_GDSC>, + <&gpucc GPU_CC_GX_GDSC>; power-domain-names = "cx", "gx"; iommus = <&adreno_smmu 5 0x400>; @@ -2377,12 +2469,12 @@ <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>, - <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>, - <&gpucc 2>, - <&gpucc 11>, - <&gpucc 5>, - <&gpucc 15>, - <&gpucc 13>; + <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>, + <&gpucc GPU_CC_AHB_CLK>, + <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>, + <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_HUB_CX_INT_CLK>, + <&gpucc GPU_CC_HUB_AON_CLK>; clock-names = "gcc_gpu_memnoc_gfx_clk", "gcc_gpu_snoc_dvm_gfx_clk", "gpu_cc_ahb_clk", @@ -2391,7 +2483,7 @@ "gpu_cc_hub_cx_int_clk", "gpu_cc_hub_aon_clk"; - power-domains = <&gpucc 0>; + power-domains = <&gpucc GPU_CC_CX_GDSC>; }; remoteproc_mpss: remoteproc@4080000 { @@ -2936,7 +3028,7 @@ }; }; - sdhc_2: sdhci@8804000 { + sdhc_2: mmc@8804000 { compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>; @@ -2950,10 +3042,10 @@ <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC2_APPS_CLK>, - <&gcc GCC_SDCC2_AHB_CLK>, + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, <&rpmhcc RPMH_CXO_CLK>; - clock-names = "core", "iface", "xo"; + clock-names = "iface", "core", "xo"; interconnects = <&aggre1_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>, <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_SDCC_2 0>; interconnect-names = "sdhc-ddr","cpu-sdhc"; @@ -3082,10 +3174,11 @@ assigned-clock-rates = <19200000>, <200000000>; interrupts-extended = <&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 13 IRQ_TYPE_EDGE_RISING>, - <&pdc 12 IRQ_TYPE_EDGE_RISING>; + <&pdc 12 IRQ_TYPE_EDGE_RISING>, + <&pdc 13 IRQ_TYPE_EDGE_RISING>; interrupt-names = "hs_phy_irq", - "dm_hs_phy_irq", "dp_hs_phy_irq"; + "dp_hs_phy_irq", + "dm_hs_phy_irq"; power-domains = <&gcc GCC_USB30_SEC_GDSC>; @@ -3265,13 +3358,13 @@ assigned-clock-rates = <19200000>, <200000000>; interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 17 IRQ_TYPE_EDGE_BOTH>, + <&pdc 14 IRQ_TYPE_LEVEL_HIGH>, <&pdc 15 IRQ_TYPE_EDGE_BOTH>, - <&pdc 14 IRQ_TYPE_LEVEL_HIGH>; + <&pdc 17 IRQ_TYPE_EDGE_BOTH>; interrupt-names = "hs_phy_irq", - "ss_phy_irq", + "dp_hs_phy_irq", "dm_hs_phy_irq", - "dp_hs_phy_irq"; + "ss_phy_irq"; power-domains = <&gcc GCC_USB30_PRIM_GDSC>; @@ -3334,7 +3427,7 @@ iommus = <&apps_smmu 0x21a2 0x0>; }; - venus_opp_table: venus-opp-table { + venus_opp_table: opp-table { compatible = "operating-points-v2"; opp-133330000 { @@ -3426,9 +3519,6 @@ "ahb", "core"; - assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>; - assigned-clock-rates = <300000000>; - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <1>; @@ -3462,11 +3552,9 @@ "lut", "core", "vsync"; - assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>, - <&dispcc DISP_CC_MDSS_VSYNC_CLK>, + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>, <&dispcc DISP_CC_MDSS_AHB_CLK>; - assigned-clock-rates = <300000000>, - <19200000>, + assigned-clock-rates = <19200000>, <19200000>; operating-points-v2 = <&mdp_opp_table>; power-domains = <&rpmhpd SC7280_CX>; @@ -3629,21 +3717,16 @@ interrupt-parent = <&mdss>; interrupts = <14>; - clocks = <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_EDP_CLKREF_EN>, - <&dispcc DISP_CC_MDSS_AHB_CLK>, + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, <&dispcc DISP_CC_MDSS_EDP_AUX_CLK>, <&dispcc DISP_CC_MDSS_EDP_LINK_CLK>, <&dispcc DISP_CC_MDSS_EDP_LINK_INTF_CLK>, <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK>; - clock-names = "core_xo", - "core_ref", - "core_iface", + clock-names = "core_iface", "core_aux", "ctrl_link", "ctrl_link_iface", "stream_pixel"; - #clock-cells = <1>; assigned-clocks = <&dispcc DISP_CC_MDSS_EDP_LINK_CLK_SRC>, <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK_SRC>; assigned-clock-parents = <&mdss_edp_phy 0>, <&mdss_edp_phy 1>; @@ -3654,9 +3737,6 @@ operating-points-v2 = <&edp_opp_table>; power-domains = <&rpmhpd SC7280_CX>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; ports { @@ -3723,7 +3803,11 @@ mdss_dp: displayport-controller@ae90000 { compatible = "qcom,sc7280-dp"; - reg = <0 0x0ae90000 0 0x1400>; + reg = <0 0xae90000 0 0x200>, + <0 0xae90200 0 0x200>, + <0 0xae90400 0 0xc00>, + <0 0xae91000 0 0x400>, + <0 0xae91400 0 0x400>; interrupt-parent = <&mdss>; interrupts = <12>; @@ -3733,12 +3817,11 @@ <&dispcc DISP_CC_MDSS_DP_LINK_CLK>, <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>, <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>; - clock-names = "core_iface", + clock-names = "core_iface", "core_aux", "ctrl_link", "ctrl_link_iface", "stream_pixel"; - #clock-cells = <1>; assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>; assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>; @@ -3843,7 +3926,7 @@ }; aoss_qmp: power-controller@c300000 { - compatible = "qcom,sc7280-aoss-qmp"; + compatible = "qcom,sc7280-aoss-qmp", "qcom,aoss-qmp"; reg = <0 0x0c300000 0 0x400>; interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP @@ -3898,6 +3981,46 @@ function = "edp_hot"; }; + mi2s0_data0: mi2s0-data0 { + pins = "gpio98"; + function = "mi2s0_data0"; + }; + + mi2s0_data1: mi2s0-data1 { + pins = "gpio99"; + function = "mi2s0_data1"; + }; + + mi2s0_mclk: mi2s0-mclk { + pins = "gpio96"; + function = "pri_mi2s"; + }; + + mi2s0_sclk: mi2s0-sclk { + pins = "gpio97"; + function = "mi2s0_sck"; + }; + + mi2s0_ws: mi2s0-ws { + pins = "gpio100"; + function = "mi2s0_ws"; + }; + + mi2s1_data0: mi2s1-data0 { + pins = "gpio107"; + function = "mi2s1_data0"; + }; + + mi2s1_sclk: mi2s1-sclk { + pins = "gpio106"; + function = "mi2s1_sck"; + }; + + mi2s1_ws: mi2s1-ws { + pins = "gpio108"; + function = "mi2s1_ws"; + }; + pcie1_clkreq_n: pcie1-clkreq-n { pins = "gpio79"; function = "pcie1_clkreqn"; @@ -4639,8 +4762,8 @@ }; }; - imem@146a5000 { - compatible = "qcom,sc7280-imem", "syscon"; + sram@146a5000 { + compatible = "qcom,sc7280-imem", "syscon", "simple-mfd"; reg = <0 0x146a5000 0 0x6000>; #address-cells = <1>; @@ -4771,9 +4894,9 @@ }; timer@17c20000 { - #address-cells = <2>; - #size-cells = <2>; - ranges; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0x20000000>; compatible = "arm,armv7-timer-mem"; reg = <0 0x17c20000 0 0x1000>; @@ -4781,49 +4904,49 @@ frame-number = <0>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; - reg = <0 0x17c21000 0 0x1000>, - <0 0x17c22000 0 0x1000>; + reg = <0x17c21000 0x1000>, + <0x17c22000 0x1000>; }; frame@17c23000 { frame-number = <1>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; - reg = <0 0x17c23000 0 0x1000>; + reg = <0x17c23000 0x1000>; status = "disabled"; }; frame@17c25000 { frame-number = <2>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - reg = <0 0x17c25000 0 0x1000>; + reg = <0x17c25000 0x1000>; status = "disabled"; }; frame@17c27000 { frame-number = <3>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - reg = <0 0x17c27000 0 0x1000>; + reg = <0x17c27000 0x1000>; status = "disabled"; }; frame@17c29000 { frame-number = <4>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - reg = <0 0x17c29000 0 0x1000>; + reg = <0x17c29000 0x1000>; status = "disabled"; }; frame@17c2b000 { frame-number = <5>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; - reg = <0 0x17c2b000 0 0x1000>; + reg = <0x17c2b000 0x1000>; status = "disabled"; }; frame@17c2d000 { frame-number = <6>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; - reg = <0 0x17c2d000 0 0x1000>; + reg = <0x17c2d000 0x1000>; status = "disabled"; }; }; diff --git a/dts/src/arm64/qcom/sc8280xp-crd.dts b/dts/src/arm64/qcom/sc8280xp-crd.dts new file mode 100644 index 0000000000..45058ad0a1 --- /dev/null +++ b/dts/src/arm64/qcom/sc8280xp-crd.dts @@ -0,0 +1,427 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + * Copyright (c) 2022, Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> + +#include "sc8280xp.dtsi" +#include "sc8280xp-pmics.dtsi" + +/ { + model = "Qualcomm SC8280XP CRD"; + compatible = "qcom,sc8280xp-crd", "qcom,sc8280xp"; + + aliases { + serial0 = &qup2_uart17; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pmc8280c_lpg 3 1000000>; + enable-gpios = <&pmc8280_1_gpios 8 GPIO_ACTIVE_HIGH>; + power-supply = <&vreg_edp_bl>; + + pinctrl-names = "default"; + pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vreg_edp_bl: regulator-edp-bl { + compatible = "regulator-fixed"; + + regulator-name = "VREG_EDP_BL"; + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + gpio = <&pmc8280_1_gpios 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&edp_bl_reg_en>; + + regulator-boot-on; + }; + + vreg_misc_3p3: regulator-misc-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_MISC_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pmc8280_1_gpios 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&misc_3p3_reg_en>; + + regulator-boot-on; + regulator-always-on; + }; +}; + +&apps_rsc { + pmc8280-1-rpmh-regulators { + compatible = "qcom,pm8350-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-l3-l5-supply = <&vreg_s11b>; + + vreg_s11b: smps11 { + regulator-name = "vreg_s11b"; + regulator-min-microvolt = <1272000>; + regulator-max-microvolt = <1272000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3b: ldo3 { + regulator-name = "vreg_l3b"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-boot-on; + regulator-always-on; + }; + + vreg_l4b: ldo4 { + regulator-name = "vreg_l4b"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l6b: ldo6 { + regulator-name = "vreg_l6b"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-boot-on; + }; + }; + + pmc8280c-rpmh-regulators { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_l1c: ldo1 { + regulator-name = "vreg_l1c"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l7c: ldo7 { + regulator-name = "vreg_l7c"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l13c: ldo13 { + regulator-name = "vreg_l13c"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + }; + + pmc8280-2-rpmh-regulators { + compatible = "qcom,pm8350-rpmh-regulators"; + qcom,pmic-id = "d"; + + vdd-l1-l4-supply = <&vreg_s11b>; + + vreg_l3d: ldo3 { + regulator-name = "vreg_l3d"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l4d: ldo4 { + regulator-name = "vreg_l4d"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l6d: ldo6 { + regulator-name = "vreg_l6d"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l7d: ldo7 { + regulator-name = "vreg_l7d"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l9d: ldo9 { + regulator-name = "vreg_l9d"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + }; +}; + +&pmc8280c_lpg { + status = "okay"; +}; + +&pmk8280_pon_pwrkey { + status = "okay"; +}; + +&qup0 { + status = "okay"; +}; + +&qup0_i2c4 { + clock-frequency = <400000>; + + pinctrl-names = "default"; + pinctrl-0 = <&qup0_i2c4_default>, <&ts0_default>; + + status = "okay"; + + touchscreen@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + }; +}; + +&qup1 { + status = "okay"; +}; + +&qup2 { + status = "okay"; +}; + +&qup2_i2c5 { + clock-frequency = <400000>; + + pinctrl-names = "default"; + pinctrl-0 = <&qup2_i2c5_default>, <&kybd_default>, <&tpad_default>; + + status = "okay"; + + touchpad@15 { + compatible = "hid-over-i2c"; + reg = <0x15>; + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + }; + + keyboard@68 { + compatible = "hid-over-i2c"; + reg = <0x68>; + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + }; +}; + +&qup2_uart17 { + compatible = "qcom,geni-debug-uart"; + + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/sc8280xp/qcadsp8280.mbn"; + + status = "okay"; +}; + +&remoteproc_nsp0 { + firmware-name = "qcom/sc8280xp/qccdsp8280.mbn"; + + status = "okay"; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l7c>; + vcc-max-microamp = <800000>; + vccq-supply = <&vreg_l3d>; + vccq-max-microamp = <900000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l6b>; + vdda-pll-supply = <&vreg_l3b>; + + status = "okay"; +}; + +&usb_0 { + status = "okay"; +}; + +&usb_0_dwc3 { + /* TODO: Define USB-C connector properly */ + dr_mode = "host"; +}; + +&usb_0_hsphy { + vdda-pll-supply = <&vreg_l9d>; + vdda18-supply = <&vreg_l1c>; + vdda33-supply = <&vreg_l7d>; + + status = "okay"; +}; + +&usb_0_qmpphy { + vdda-phy-supply = <&vreg_l9d>; + vdda-pll-supply = <&vreg_l4d>; + + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + /* TODO: Define USB-C connector properly */ + dr_mode = "host"; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&vreg_l4b>; + vdda18-supply = <&vreg_l1c>; + vdda33-supply = <&vreg_l13c>; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vreg_l4b>; + vdda-pll-supply = <&vreg_l3b>; + + status = "okay"; +}; + +&xo_board_clk { + clock-frequency = <38400000>; +}; + +/* PINCTRL - additions to nodes defined in sc8280xp.dtsi */ + +&pmc8280_1_gpios { + edp_bl_en: edp-bl-en-state { + pins = "gpio8"; + function = "normal"; + }; + + edp_bl_reg_en: edp-bl-reg-en-state { + pins = "gpio9"; + function = "normal"; + }; + + misc_3p3_reg_en: misc-3p3-reg-en-state { + pins = "gpio1"; + function = "normal"; + }; +}; + +&pmc8280c_gpios { + edp_bl_pwm: edp-bl-pwm-state { + pins = "gpio8"; + function = "func1"; + }; +}; + +&tlmm { + gpio-reserved-ranges = <74 6>, <83 4>, <125 2>, <128 2>, <154 7>; + + kybd_default: kybd-default-state { + disable { + pins = "gpio102"; + function = "gpio"; + output-low; + }; + + int-n { + pins = "gpio104"; + function = "gpio"; + bias-disable; + }; + + reset { + pins = "gpio105"; + function = "gpio"; + bias-disable; + }; + }; + + qup0_i2c4_default: qup0-i2c4-default-state { + pins = "gpio171", "gpio172"; + function = "qup4"; + + bias-disable; + drive-strength = <16>; + }; + + qup2_i2c5_default: qup2-i2c5-default-state { + pins = "gpio81", "gpio82"; + function = "qup21"; + + bias-disable; + drive-strength = <16>; + }; + + tpad_default: tpad-default-state { + int-n { + pins = "gpio182"; + function = "gpio"; + bias-disable; + }; + }; + + ts0_default: ts0-default-state { + int-n { + pins = "gpio175"; + function = "gpio"; + bias-pull-up; + }; + + reset-n { + pins = "gpio99"; + function = "gpio"; + output-high; + drive-strength = <16>; + }; + }; +}; diff --git a/dts/src/arm64/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/dts/src/arm64/qcom/sc8280xp-lenovo-thinkpad-x13s.dts new file mode 100644 index 0000000000..84dc92dda0 --- /dev/null +++ b/dts/src/arm64/qcom/sc8280xp-lenovo-thinkpad-x13s.dts @@ -0,0 +1,386 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + * Copyright (c) 2022, Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> + +#include "sc8280xp.dtsi" +#include "sc8280xp-pmics.dtsi" + +/ { + model = "Lenovo ThinkPad X13s"; + compatible = "lenovo,thinkpad-x13s", "qcom,sc8280xp"; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pmc8280c_lpg 3 1000000>; + enable-gpios = <&pmc8280_1_gpios 8 GPIO_ACTIVE_HIGH>; + power-supply = <&vreg_edp_bl>; + + pinctrl-names = "default"; + pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>; + }; + + vreg_edp_bl: regulator-edp-bl { + compatible = "regulator-fixed"; + + regulator-name = "VBL9"; + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + gpio = <&pmc8280_1_gpios 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&edp_bl_reg_en>; + + regulator-boot-on; + }; + + vreg_misc_3p3: regulator-misc-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VCC3B"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pmc8280_1_gpios 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&misc_3p3_reg_en>; + + regulator-boot-on; + regulator-always-on; + }; +}; + +&apps_rsc { + pmc8280-1-rpmh-regulators { + compatible = "qcom,pm8350-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-l3-l5-supply = <&vreg_s11b>; + + vreg_s11b: smps11 { + regulator-name = "vreg_s11b"; + regulator-min-microvolt = <1272000>; + regulator-max-microvolt = <1272000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3b: ldo3 { + regulator-name = "vreg_l3b"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-boot-on; + }; + + vreg_l4b: ldo4 { + regulator-name = "vreg_l4b"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l6b: ldo6 { + regulator-name = "vreg_l6b"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-boot-on; + regulator-always-on; // FIXME: VDD_A_EDP_0_0P9 + }; + }; + + pmc8280c-rpmh-regulators { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_l1c: ldo1 { + regulator-name = "vreg_l1c"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l12c: ldo12 { + regulator-name = "vreg_l12c"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l13c: ldo13 { + regulator-name = "vreg_l13c"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + }; + + pmc8280-2-rpmh-regulators { + compatible = "qcom,pm8350-rpmh-regulators"; + qcom,pmic-id = "d"; + + vdd-l1-l4-supply = <&vreg_s11b>; + + vreg_l3d: ldo3 { + regulator-name = "vreg_l3d"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l4d: ldo4 { + regulator-name = "vreg_l4d"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l7d: ldo7 { + regulator-name = "vreg_l7d"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l9d: ldo9 { + regulator-name = "vreg_l9d"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + }; +}; + +&pmc8280c_lpg { + status = "okay"; +}; + +&pmk8280_pon_pwrkey { + status = "okay"; +}; + +&qup0 { + status = "okay"; +}; + +&qup0_i2c4 { + clock-frequency = <400000>; + + pinctrl-names = "default"; + pinctrl-0 = <&qup0_i2c4_default>, <&ts0_default>; + + status = "okay"; + + /* FIXME: verify */ + touchscreen@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + }; +}; + +&qup1 { + status = "okay"; +}; + +&qup2 { + status = "okay"; +}; + +&qup2_i2c5 { + clock-frequency = <400000>; + + pinctrl-names = "default"; + pinctrl-0 = <&qup2_i2c5_default>, <&kybd_default>, <&tpad_default>; + + status = "okay"; + + touchpad@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + hid-descr-addr = <0x20>; + interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + }; + + keyboard@68 { + compatible = "hid-over-i2c"; + reg = <0x68>; + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + }; +}; + +&remoteproc_adsp { + firmware-name = "qcom/sc8280xp/qcadsp8280.mbn"; + + status = "okay"; +}; + +&remoteproc_nsp0 { + firmware-name = "qcom/sc8280xp/qccdsp8280.mbn"; + + status = "okay"; +}; + +&usb_0 { + status = "okay"; +}; + +&usb_0_dwc3 { + /* TODO: Define USB-C connector properly */ + dr_mode = "host"; +}; + +&usb_0_hsphy { + vdda-pll-supply = <&vreg_l9d>; + vdda18-supply = <&vreg_l1c>; + vdda33-supply = <&vreg_l7d>; + + status = "okay"; +}; + +&usb_0_qmpphy { + vdda-phy-supply = <&vreg_l9d>; + vdda-pll-supply = <&vreg_l4d>; + + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + /* TODO: Define USB-C connector properly */ + dr_mode = "host"; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&vreg_l4b>; + vdda18-supply = <&vreg_l1c>; + vdda33-supply = <&vreg_l13c>; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vreg_l4b>; + vdda-pll-supply = <&vreg_l3b>; + + status = "okay"; +}; + +&xo_board_clk { + clock-frequency = <38400000>; +}; + +/* PINCTRL */ + +&pmc8280_1_gpios { + edp_bl_en: edp-bl-en-state { + pins = "gpio8"; + function = "normal"; + }; + + edp_bl_reg_en: edp-bl-reg-en-state { + pins = "gpio9"; + function = "normal"; + }; + + misc_3p3_reg_en: misc-3p3-reg-en-state { + pins = "gpio1"; + function = "normal"; + }; +}; + +&pmc8280c_gpios { + edp_bl_pwm: edp-bl-pwm-state { + pins = "gpio8"; + function = "func1"; + }; +}; + +&tlmm { + gpio-reserved-ranges = <70 2>, <74 6>, <83 4>, <125 2>, <128 2>, <154 7>; + + kybd_default: kybd-default-state { + disable { + pins = "gpio102"; + function = "gpio"; + output-low; + }; + + int-n { + pins = "gpio104"; + function = "gpio"; + bias-disable; + }; + + reset { + pins = "gpio105"; + function = "gpio"; + bias-disable; + }; + }; + + qup0_i2c4_default: qup0-i2c4-default-state { + pins = "gpio171", "gpio172"; + function = "qup4"; + bias-disable; + drive-strength = <16>; + }; + + qup2_i2c5_default: qup2-i2c5-default-state { + pins = "gpio81", "gpio82"; + function = "qup21"; + bias-disable; + drive-strength = <16>; + }; + + tpad_default: tpad-default-state { + int-n { + pins = "gpio182"; + function = "gpio"; + bias-disable; + }; + }; + + ts0_default: ts0-default-state { + int-n { + pins = "gpio175"; + function = "gpio"; + bias-pull-up; + }; + + reset-n { + pins = "gpio99"; + function = "gpio"; + output-high; + drive-strength = <16>; + }; + }; +}; diff --git a/dts/src/arm64/qcom/sc8280xp-pmics.dtsi b/dts/src/arm64/qcom/sc8280xp-pmics.dtsi new file mode 100644 index 0000000000..ae90b97aec --- /dev/null +++ b/dts/src/arm64/qcom/sc8280xp-pmics.dtsi @@ -0,0 +1,109 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Linaro Limited + */ + +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + pmk8280: pmic@0 { + compatible = "qcom,pmk8350", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmk8280_pon: pon@1300 { + compatible = "qcom,pm8998-pon"; + reg = <0x1300>; + + pmk8280_pon_pwrkey: pwrkey { + compatible = "qcom,pmk8350-pwrkey"; + interrupts = <0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>; + linux,code = <KEY_POWER>; + status = "disabled"; + }; + }; + }; + + pmc8280_1: pmic@1 { + compatible = "qcom,pm8350", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmc8280_1_gpios: gpio@8800 { + compatible = "qcom,pm8350-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmc8280_1_gpios 0 0 10>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmc8280c: pmic@2 { + compatible = "qcom,pm8350c", "qcom,spmi-pmic"; + reg = <0x2 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmc8280c_gpios: gpio@8800 { + compatible = "qcom,pm8350c-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmc8280c_gpios 0 0 9>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pmc8280c_lpg: lpg@e800 { + compatible = "qcom,pm8350c-pwm"; + reg = <0xe800>; + + #address-cells = <1>; + #size-cells = <0>; + + #pwm-cells = <2>; + + status = "disabled"; + }; + }; + + pmc8280_2: pmic@3 { + compatible = "qcom,pm8350", "qcom,spmi-pmic"; + reg = <0x3 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmc8280_2_gpios: gpio@8800 { + compatible = "qcom,pm8350-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmc8280_2_gpios 0 0 10>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmr735a: pmic@4 { + compatible = "qcom,pmr735a", "qcom,spmi-pmic"; + reg = <0x4 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmr735a_gpios: gpio@8800 { + compatible = "qcom,pmr735a-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmr735a_gpios 0 0 4>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/dts/src/arm64/qcom/sc8280xp.dtsi b/dts/src/arm64/qcom/sc8280xp.dtsi new file mode 100644 index 0000000000..49ea8b5612 --- /dev/null +++ b/dts/src/arm64/qcom/sc8280xp.dtsi @@ -0,0 +1,2147 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + * Copyright (c) 2022, Linaro Limited + */ + +#include <dt-bindings/clock/qcom,gcc-sc8280xp.h> +#include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/interconnect/qcom,sc8280xp.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/mailbox/qcom-ipcc.h> +#include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + clocks { + xo_board_clk: xo-board-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32764>; + }; + }; + + cpu0_opp_table: cpu0-opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + }; + opp-403200000 { + opp-hz = /bits/ 64 <403200000>; + }; + opp-499200000 { + opp-hz = /bits/ 64 <499200000>; + }; + opp-595200000 { + opp-hz = /bits/ 64 <595200000>; + }; + opp-691200000 { + opp-hz = /bits/ 64 <691200000>; + }; + opp-806400000 { + opp-hz = /bits/ 64 <806400000>; + }; + opp-902400000 { + opp-hz = /bits/ 64 <902400000>; + }; + opp-1017600000 { + opp-hz = /bits/ 64 <1017600000>; + }; + opp-1113600000 { + opp-hz = /bits/ 64 <1113600000>; + }; + opp-1209600000 { + opp-hz = /bits/ 64 <1209600000>; + }; + opp-1324800000 { + opp-hz = /bits/ 64 <1324800000>; + }; + opp-1440000000 { + opp-hz = /bits/ 64 <1440000000>; + }; + opp-1555200000 { + opp-hz = /bits/ 64 <1555200000>; + }; + opp-1670400000 { + opp-hz = /bits/ 64 <1670400000>; + }; + opp-1785600000 { + opp-hz = /bits/ 64 <1785600000>; + }; + opp-1881600000 { + opp-hz = /bits/ 64 <1881600000>; + }; + opp-1996800000 { + opp-hz = /bits/ 64 <1996800000>; + }; + opp-2112000000 { + opp-hz = /bits/ 64 <2112000000>; + }; + opp-2227200000 { + opp-hz = /bits/ 64 <2227200000>; + }; + opp-2342400000 { + opp-hz = /bits/ 64 <2342400000>; + }; + opp-2438400000 { + opp-hz = /bits/ 64 <2438400000>; + }; + }; + + cpu4_opp_table: cpu4-opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-825600000 { + opp-hz = /bits/ 64 <825600000>; + }; + opp-940800000 { + opp-hz = /bits/ 64 <940800000>; + }; + opp-1056000000 { + opp-hz = /bits/ 64 <1056000000>; + }; + opp-1171200000 { + opp-hz = /bits/ 64 <1171200000>; + }; + opp-1286400000 { + opp-hz = /bits/ 64 <1286400000>; + }; + opp-1401600000 { + opp-hz = /bits/ 64 <1401600000>; + }; + opp-1516800000 { + opp-hz = /bits/ 64 <1516800000>; + }; + opp-1632000000 { + opp-hz = /bits/ 64 <1632000000>; + }; + opp-1747200000 { + opp-hz = /bits/ 64 <1747200000>; + }; + opp-1862400000 { + opp-hz = /bits/ 64 <1862400000>; + }; + opp-1977600000 { + opp-hz = /bits/ 64 <1977600000>; + }; + opp-2073600000 { + opp-hz = /bits/ 64 <2073600000>; + }; + opp-2169600000 { + opp-hz = /bits/ 64 <2169600000>; + }; + opp-2284800000 { + opp-hz = /bits/ 64 <2284800000>; + }; + opp-2400000000 { + opp-hz = /bits/ 64 <2400000000>; + }; + opp-2496000000 { + opp-hz = /bits/ 64 <2496000000>; + }; + opp-2592000000 { + opp-hz = /bits/ 64 <2592000000>; + }; + opp-2688000000 { + opp-hz = /bits/ 64 <2688000000>; + }; + opp-2803200000 { + opp-hz = /bits/ 64 <2803200000>; + }; + opp-2899200000 { + opp-hz = /bits/ 64 <2899200000>; + }; + opp-2995200000 { + opp-hz = /bits/ 64 <2995200000>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x0>; + enable-method = "psci"; + capacity-dmips-mhz = <602>; + next-level-cache = <&L2_0>; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; + L2_0: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x100>; + enable-method = "psci"; + capacity-dmips-mhz = <602>; + next-level-cache = <&L2_100>; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; + L2_100: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x200>; + enable-method = "psci"; + capacity-dmips-mhz = <602>; + next-level-cache = <&L2_200>; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; + L2_200: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x300>; + enable-method = "psci"; + capacity-dmips-mhz = <602>; + next-level-cache = <&L2_300>; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; + L2_300: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x400>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_400>; + power-domains = <&CPU_PD4>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + #cooling-cells = <2>; + L2_400: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x500>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_500>; + power-domains = <&CPU_PD5>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + #cooling-cells = <2>; + L2_500: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x600>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_600>; + power-domains = <&CPU_PD6>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + #cooling-cells = <2>; + L2_600: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x700>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_700>; + power-domains = <&CPU_PD7>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + #cooling-cells = <2>; + L2_700: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + + core4 { + cpu = <&CPU4>; + }; + + core5 { + cpu = <&CPU5>; + }; + + core6 { + cpu = <&CPU6>; + }; + + core7 { + cpu = <&CPU7>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "little-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <355>; + exit-latency-us = <909>; + min-residency-us = <3934>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "big-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <241>; + exit-latency-us = <1461>; + min-residency-us = <4488>; + local-timer-stop; + }; + }; + + domain-idle-states { + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "domain-idle-state"; + idle-state-name = "cluster-power-collapse"; + arm,psci-suspend-param = <0x4100c344>; + entry-latency-us = <3263>; + exit-latency-us = <6562>; + min-residency-us = <9987>; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-sc8280xp", "qcom,scm"; + }; + }; + + aggre1_noc: interconnect-aggre1-noc { + compatible = "qcom,sc8280xp-aggre1-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre2_noc: interconnect-aggre2-noc { + compatible = "qcom,sc8280xp-aggre2-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + clk_virt: interconnect-clk-virt { + compatible = "qcom,sc8280xp-clk-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + config_noc: interconnect-config-noc { + compatible = "qcom,sc8280xp-config-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + dc_noc: interconnect-dc-noc { + compatible = "qcom,sc8280xp-dc-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + gem_noc: interconnect-gem-noc { + compatible = "qcom,sc8280xp-gem-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + lpass_noc: interconnect-lpass-ag-noc { + compatible = "qcom,sc8280xp-lpass-ag-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mc_virt: interconnect-mc-virt { + compatible = "qcom,sc8280xp-mc-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mmss_noc: interconnect-mmss-noc { + compatible = "qcom,sc8280xp-mmss-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + nspa_noc: interconnect-nspa-noc { + compatible = "qcom,sc8280xp-nspa-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + nspb_noc: interconnect-nspb-noc { + compatible = "qcom,sc8280xp-nspb-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect-system-noc { + compatible = "qcom,sc8280xp-system-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x80000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + + CPU_PD0: cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD1: cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD2: cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD3: cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD4: cpu4 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD5: cpu5 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD6: cpu6 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD7: cpu7 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CLUSTER_PD: cpu-cluster0 { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP_0>; + }; + }; + + qup_opp_table_100mhz: qup-100mhz-opp-table { + compatible = "operating-points-v2"; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + reserved-region@80000000 { + reg = <0 0x80000000 0 0x860000>; + no-map; + }; + + cmd_db: cmd-db-region@80860000 { + compatible = "qcom,cmd-db"; + reg = <0 0x80860000 0 0x20000>; + no-map; + }; + + reserved-region@80880000 { + reg = <0 0x80880000 0 0x80000>; + no-map; + }; + + smem_mem: smem-region@80900000 { + compatible = "qcom,smem"; + reg = <0 0x80900000 0 0x200000>; + no-map; + hwlocks = <&tcsr_mutex 3>; + }; + + reserved-region@80b00000 { + reg = <0 0x80b00000 0 0x100000>; + no-map; + }; + + reserved-region@83b00000 { + reg = <0 0x83b00000 0 0x1700000>; + no-map; + }; + + reserved-region@85b00000 { + reg = <0 0x85b00000 0 0xc00000>; + no-map; + }; + + pil_adsp_mem: adsp-region@86c00000 { + reg = <0 0x86c00000 0 0x2000000>; + no-map; + }; + + pil_nsp0_mem: cdsp0-region@8a100000 { + reg = <0 0x8a100000 0 0x1e00000>; + no-map; + }; + + pil_nsp1_mem: cdsp1-region@8c600000 { + reg = <0 0x8c600000 0 0x1e00000>; + no-map; + }; + + reserved-region@aeb00000 { + reg = <0 0xaeb00000 0 0x16600000>; + no-map; + }; + }; + + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + smp2p_adsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_adsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-nsp0 { + compatible = "qcom,smp2p"; + qcom,smem = <94>, <432>; + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + smp2p_nsp0_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_nsp0_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-nsp1 { + compatible = "qcom,smp2p"; + qcom,smem = <617>, <616>; + interrupts-extended = <&ipcc IPCC_CLIENT_NSP1 + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_NSP1 + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <12>; + + smp2p_nsp1_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_nsp1_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-sc8280xp"; + reg = <0x0 0x00100000 0x0 0x1f0000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <&usb_0_ssphy>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <&usb_1_ssphy>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>; + power-domains = <&rpmhpd SC8280XP_CX>; + }; + + ipcc: mailbox@408000 { + compatible = "qcom,sc8280xp-ipcc", "qcom,ipcc"; + reg = <0 0x00408000 0 0x1000>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <3>; + #mbox-cells = <2>; + }; + + qup2: geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x008c0000 0 0x2000>; + clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; + iommus = <&apps_smmu 0xa3 0>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + qup2_uart17: serial@884000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00884000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + operating-points-v2 = <&qup_opp_table_100mhz>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + qup2_i2c5: i2c@894000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00894000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + }; + + qup0: geniqup@9c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x009c0000 0 0x6000>; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; + iommus = <&apps_smmu 0x563 0>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + qup0_i2c4: i2c@990000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00990000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + }; + + qup1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x00ac0000 0 0x6000>; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; + iommus = <&apps_smmu 0x83 0>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + }; + + ufs_mem_hc: ufs@1d84000 { + compatible = "qcom,sc8280xp-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0 0x01d84000 0 0x3000>; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + phys = <&ufs_mem_phy_lanes>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + power-domains = <&gcc UFS_PHY_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + iommus = <&apps_smmu 0xe0 0x0>; + + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + clock-names = "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + freq-table-hz = <75000000 300000000>, + <0 0>, + <0 0>, + <75000000 300000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>; + status = "disabled"; + }; + + ufs_mem_phy: phy@1d87000 { + compatible = "qcom,sc8280xp-qmp-ufs-phy"; + reg = <0 0x01d87000 0 0xe10>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clock-names = "ref", + "ref_aux"; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + status = "disabled"; + + ufs_mem_phy_lanes: phy@1d87400 { + reg = <0 0x01d87400 0 0x108>, + <0 0x01d87600 0 0x1e0>, + <0 0x01d87c00 0 0x1dc>, + <0 0x01d87800 0 0x108>, + <0 0x01d87a00 0 0x1e0>; + #phy-cells = <0>; + }; + }; + + ufs_card_hc: ufs@1da4000 { + compatible = "qcom,sc8280xp-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0 0x01da4000 0 0x3000>; + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; + phys = <&ufs_card_phy_lanes>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_CARD_BCR>; + reset-names = "rst"; + + power-domains = <&gcc UFS_CARD_GDSC>; + + iommus = <&apps_smmu 0x4a0 0x0>; + + clocks = <&gcc GCC_UFS_CARD_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_CARD_AXI_CLK>, + <&gcc GCC_UFS_CARD_AHB_CLK>, + <&gcc GCC_UFS_CARD_UNIPRO_CORE_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_CARD_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_CARD_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_CARD_RX_SYMBOL_1_CLK>; + clock-names = "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + freq-table-hz = <75000000 300000000>, + <0 0>, + <0 0>, + <75000000 300000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>; + status = "disabled"; + }; + + ufs_card_phy: phy@1da7000 { + compatible = "qcom,sc8280xp-qmp-ufs-phy"; + reg = <0 0x01da7000 0 0xe10>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clock-names = "ref", + "ref_aux"; + clocks = <&gcc GCC_UFS_1_CARD_CLKREF_CLK>, + <&gcc GCC_UFS_CARD_PHY_AUX_CLK>; + + resets = <&ufs_card_hc 0>; + reset-names = "ufsphy"; + + status = "disabled"; + + ufs_card_phy_lanes: phy@1da7400 { + reg = <0 0x01da7400 0 0x108>, + <0 0x01da7600 0 0x1e0>, + <0 0x01da7c00 0 0x1dc>, + <0 0x01da7800 0 0x108>, + <0 0x01da7a00 0 0x1e0>; + #phy-cells = <0>; + }; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x01f40000 0x0 0x20000>; + #hwlock-cells = <1>; + }; + + usb_0_hsphy: phy@88e5000 { + compatible = "qcom,sc8280xp-usb-hs-phy", + "qcom,usb-snps-hs-5nm-phy"; + reg = <0 0x088e5000 0 0x400>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_2_hsphy0: phy@88e7000 { + compatible = "qcom,sc8280xp-usb-hs-phy", + "qcom,usb-snps-hs-5nm-phy"; + reg = <0 0x088e7000 0 0x400>; + clocks = <&gcc GCC_USB2_HS0_CLKREF_CLK>; + clock-names = "ref"; + resets = <&gcc GCC_QUSB2PHY_HS0_MP_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_2_hsphy1: phy@88e8000 { + compatible = "qcom,sc8280xp-usb-hs-phy", + "qcom,usb-snps-hs-5nm-phy"; + reg = <0 0x088e8000 0 0x400>; + clocks = <&gcc GCC_USB2_HS1_CLKREF_CLK>; + clock-names = "ref"; + resets = <&gcc GCC_QUSB2PHY_HS1_MP_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_2_hsphy2: phy@88e9000 { + compatible = "qcom,sc8280xp-usb-hs-phy", + "qcom,usb-snps-hs-5nm-phy"; + reg = <0 0x088e9000 0 0x400>; + clocks = <&gcc GCC_USB2_HS2_CLKREF_CLK>; + clock-names = "ref"; + resets = <&gcc GCC_QUSB2PHY_HS2_MP_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_2_hsphy3: phy@88ea000 { + compatible = "qcom,sc8280xp-usb-hs-phy", + "qcom,usb-snps-hs-5nm-phy"; + reg = <0 0x088ea000 0 0x400>; + clocks = <&gcc GCC_USB2_HS3_CLKREF_CLK>; + clock-names = "ref"; + resets = <&gcc GCC_QUSB2PHY_HS3_MP_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_2_qmpphy0: phy-wrapper@88ef000 { + compatible = "qcom,sc8280xp-qmp-usb3-uni-phy"; + reg = <0 0x088ef000 0 0x1c8>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_MP0_CLKREF_CLK>, + <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>; + clock-names = "aux", "ref_clk_src", "ref", "com_aux"; + + resets = <&gcc GCC_USB3_UNIPHY_MP0_BCR>, + <&gcc GCC_USB3UNIPHY_PHY_MP0_BCR>; + reset-names = "phy", "common"; + + power-domains = <&gcc USB30_MP_GDSC>; + + status = "disabled"; + + usb_2_ssphy0: phy@88efe00 { + reg = <0 0x088efe00 0 0x160>, + <0 0x088f0000 0 0x1ec>, + <0 0x088ef200 0 0x1f0>; + #phy-cells = <0>; + #clock-cells = <0>; + clocks = <&gcc GCC_USB3_MP_PHY_PIPE_0_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb2_phy0_pipe_clk"; + }; + }; + + usb_2_qmpphy1: phy-wrapper@88f1000 { + compatible = "qcom,sc8280xp-qmp-usb3-uni-phy"; + reg = <0 0x088f1000 0 0x1c8>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_MP1_CLKREF_CLK>, + <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>; + clock-names = "aux", "ref_clk_src", "ref", "com_aux"; + + resets = <&gcc GCC_USB3_UNIPHY_MP1_BCR>, + <&gcc GCC_USB3UNIPHY_PHY_MP1_BCR>; + reset-names = "phy", "common"; + + power-domains = <&gcc USB30_MP_GDSC>; + + status = "disabled"; + + usb_2_ssphy1: phy@88f1e00 { + reg = <0 0x088f1e00 0 0x160>, + <0 0x088f2000 0 0x1ec>, + <0 0x088f1200 0 0x1f0>; + #phy-cells = <0>; + #clock-cells = <0>; + clocks = <&gcc GCC_USB3_MP_PHY_PIPE_1_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb2_phy1_pipe_clk"; + }; + }; + + remoteproc_adsp: remoteproc@3000000 { + compatible = "qcom,sc8280xp-adsp-pas"; + reg = <0 0x03000000 0 0x100>; + + interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack", "shutdown-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SC8280XP_LCX>, + <&rpmhpd SC8280XP_LMX>; + power-domain-names = "lcx", "lmx"; + + memory-region = <&pil_adsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + remoteproc_adsp_glink: glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "lpass"; + qcom,remote-pid = <2>; + }; + }; + + usb_0_qmpphy: phy-wrapper@88ec000 { + compatible = "qcom,sc8280xp-qmp-usb43dp-phy"; + reg = <0 0x088ec000 0 0x1e4>, + <0 0x088eb000 0 0x40>, + <0 0x088ed000 0 0x1c8>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB4_EUD_CLKREF_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; + clock-names = "aux", "ref_clk_src", "ref", "com_aux"; + + resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, + <&gcc GCC_USB3_DP_PHY_PRIM_BCR>; + reset-names = "phy", "common"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + + status = "disabled"; + + usb_0_ssphy: usb3-phy@88eb400 { + reg = <0 0x088eb400 0 0x100>, + <0 0x088eb600 0 0x3ec>, + <0 0x088ec400 0 0x1f0>, + <0 0x088eba00 0 0x100>, + <0 0x088ebc00 0 0x3ec>, + <0 0x088ec700 0 0x64>; + #phy-cells = <0>; + #clock-cells = <0>; + clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb0_phy_pipe_clk_src"; + }; + + usb_0_dpphy: dp-phy@88ed200 { + reg = <0 0x088ed200 0 0x200>, + <0 0x088ed400 0 0x200>, + <0 0x088eda00 0 0x200>, + <0 0x088ea600 0 0x200>, + <0 0x088ea800 0 0x200>; + #clock-cells = <1>; + #phy-cells = <0>; + }; + }; + + usb_1_hsphy: phy@8902000 { + compatible = "qcom,sc8280xp-usb-hs-phy", + "qcom,usb-snps-hs-5nm-phy"; + reg = <0 0x08902000 0 0x400>; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; + + status = "disabled"; + }; + + usb_1_qmpphy: phy-wrapper@8904000 { + compatible = "qcom,sc8280xp-qmp-usb43dp-phy"; + reg = <0 0x08904000 0 0x1e4>, + <0 0x08903000 0 0x40>, + <0 0x08905000 0 0x1c8>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB4_CLKREF_CLK>, + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>; + clock-names = "aux", "ref_clk_src", "ref", "com_aux"; + + resets = <&gcc GCC_USB3_PHY_SEC_BCR>, + <&gcc GCC_USB4_1_DP_PHY_PRIM_BCR>; + reset-names = "phy", "common"; + + power-domains = <&gcc USB30_SEC_GDSC>; + + status = "disabled"; + + usb_1_ssphy: usb3-phy@8903400 { + reg = <0 0x08903400 0 0x100>, + <0 0x08903c00 0 0x3ec>, + <0 0x08904400 0 0x1f0>, + <0 0x08903a00 0 0x100>, + <0 0x08903c00 0 0x3ec>, + <0 0x08904200 0 0x18>; + #phy-cells = <0>; + #clock-cells = <0>; + clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb1_phy_pipe_clk_src"; + }; + + usb_1_dpphy: dp-phy@8904200 { + reg = <0 0x08904200 0 0x200>, + <0 0x08904400 0 0x200>, + <0 0x08904a00 0 0x200>, + <0 0x08904600 0 0x200>, + <0 0x08904800 0 0x200>; + #clock-cells = <1>; + #phy-cells = <0>; + }; + }; + + system-cache-controller@9200000 { + compatible = "qcom,sc8280xp-llcc"; + reg = <0 0x09200000 0 0x58000>, <0 0x09600000 0 0x58000>; + reg-names = "llcc_base", "llcc_broadcast_base"; + interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; + }; + + usb_0: usb@a6f8800 { + compatible = "qcom,sc8280xp-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_NORTH_AXI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_SOUTH_AXI_CLK>, + <&gcc GCC_SYS_NOC_USB_AXI_CLK>; + clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi", + "noc_aggr", "noc_aggr_north", "noc_aggr_south", "noc_sys"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 804 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 14 IRQ_TYPE_EDGE_BOTH>, + <&pdc 15 IRQ_TYPE_EDGE_BOTH>, + <&pdc 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>; + interconnect-names = "usb-ddr", "apps-usb"; + + status = "disabled"; + + usb_0_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xcd00>; + interrupts = <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x820 0x0>; + phys = <&usb_0_hsphy>, <&usb_0_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + usb_1: usb@a8f8800 { + compatible = "qcom,sc8280xp-dwc3", "qcom,dwc3"; + reg = <0 0x0a8f8800 0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_SLEEP_CLK>, + <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_NORTH_AXI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_SOUTH_AXI_CLK>, + <&gcc GCC_SYS_NOC_USB_AXI_CLK>; + clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi", + "noc_aggr", "noc_aggr_north", "noc_aggr_south", "noc_sys"; + + assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 12 IRQ_TYPE_EDGE_BOTH>, + <&pdc 13 IRQ_TYPE_EDGE_BOTH>, + <&pdc 136 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; + + power-domains = <&gcc USB30_SEC_GDSC>; + + resets = <&gcc GCC_USB30_SEC_BCR>; + + interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>; + interconnect-names = "usb-ddr", "apps-usb"; + + status = "disabled"; + + usb_1_dwc3: usb@a800000 { + compatible = "snps,dwc3"; + reg = <0 0x0a800000 0 0xcd00>; + interrupts = <GIC_SPI 810 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x860 0x0>; + phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,sc8280xp-pdc", "qcom,pdc"; + reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>; + qcom,pdc-ranges = <0 480 40>, + <40 140 14>, + <54 263 1>, + <55 306 4>, + <59 312 3>, + <62 374 2>, + <64 434 2>, + <66 438 3>, + <69 86 1>, + <70 520 54>, + <124 609 28>, + <159 638 1>, + <160 720 8>, + <168 801 1>, + <169 728 30>, + <199 416 2>, + <201 449 1>, + <202 89 1>, + <203 451 1>, + <204 462 1>, + <205 264 1>, + <206 579 1>, + <207 653 1>, + <208 656 1>, + <209 659 1>, + <210 122 1>, + <211 699 1>, + <212 705 1>, + <213 450 1>, + <214 643 1>, + <216 646 5>, + <221 390 5>, + <226 700 3>, + <229 240 3>, + <232 269 1>, + <233 377 1>, + <234 372 1>, + <235 138 1>, + <236 857 1>, + <237 860 1>, + <238 137 1>, + <239 668 1>, + <240 366 1>, + <241 949 1>, + <242 815 5>, + <247 769 1>, + <248 768 1>, + <249 663 1>, + <250 799 2>, + <252 798 1>, + <253 765 1>, + <254 763 1>, + <255 454 1>, + <258 139 1>, + <259 786 2>, + <261 370 2>, + <263 158 2>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + tsens0: thermal-sensor@c263000 { + compatible = "qcom,sc8280xp-tsens", "qcom,tsens-v2"; + reg = <0 0x0c263000 0 0x1ff>, /* TM */ + <0 0x0c222000 0 0x8>; /* SROT */ + #qcom,sensors = <14>; + interrupts-extended = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 28 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c265000 { + compatible = "qcom,sc8280xp-tsens", "qcom,tsens-v2"; + reg = <0 0x0c265000 0 0x1ff>, /* TM */ + <0 0x0c223000 0 0x8>; /* SROT */ + #qcom,sensors = <16>; + interrupts-extended = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 29 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + aoss_qmp: power-controller@c300000 { + compatible = "qcom,sc8280xp-aoss-qmp", "qcom,aoss-qmp"; + reg = <0 0x0c300000 0 0x400>; + interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; + + #clock-cells = <0>; + }; + + spmi_bus: spmi@c440000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0 0x0c440000 0 0x1100>, + <0 0x0c600000 0 0x2000000>, + <0 0x0e600000 0 0x100000>, + <0 0x0e700000 0 0xa0000>, + <0 0x0c40a000 0 0x26000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <1>; + #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + tlmm: pinctrl@f100000 { + compatible = "qcom,sc8280xp-tlmm"; + reg = <0 0x0f100000 0 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 230>; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,sc8280xp-smmu-500", "arm,mmu-500"; + reg = <0 0x15000000 0 0x100000>; + #iommu-cells = <2>; + #global-interrupts = <2>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 708 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 709 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 710 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 713 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 714 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 715 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 912 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 911 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 910 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 909 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 908 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 907 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 906 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 905 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 904 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 903 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 902 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 901 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 900 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 899 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 898 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 895 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 894 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 893 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 892 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 891 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 890 IRQ_TYPE_LEVEL_HIGH>; + }; + + intc: interrupt-controller@17a00000 { + compatible = "arm,gic-v3"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */ + <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + #redistributor-regions = <1>; + redistributor-stride = <0 0x20000>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gic-its@17a40000 { + compatible = "arm,gic-v3-its"; + reg = <0 0x17a40000 0 0x20000>; + msi-controller; + #msi-cells = <1>; + }; + }; + + watchdog@17c10000 { + compatible = "qcom,apss-wdt-sc8280xp", "qcom,kpss-wdt"; + reg = <0 0x17c10000 0 0x1000>; + clocks = <&sleep_clk>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + }; + + timer@17c20000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0 0x17c20000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x0 0x20000000>; + + frame@17c21000 { + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17c21000 0x1000>, + <0x17c22000 0x1000>; + }; + + frame@17c23000 { + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17c23000 0x1000>; + status = "disabled"; + }; + + frame@17c25000 { + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17c25000 0x1000>; + status = "disabled"; + }; + + frame@17c27000 { + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17c26000 0x1000>; + status = "disabled"; + }; + + frame@17c29000 { + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17c29000 0x1000>; + status = "disabled"; + }; + + frame@17c2b000 { + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17c2b000 0x1000>; + status = "disabled"; + }; + + frame@17c2d000 { + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17c2d000 0x1000>; + status = "disabled"; + }; + }; + + apps_rsc: rsc@18200000 { + compatible = "qcom,rpmh-rsc"; + reg = <0x0 0x18200000 0x0 0x10000>, + <0x0 0x18210000 0x0 0x10000>, + <0x0 0x18220000 0x0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>, + <WAKE_TCS 3>, <CONTROL_TCS 1>; + label = "apps_rsc"; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + + rpmhcc: clock-controller { + compatible = "qcom,sc8280xp-rpmh-clk"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board_clk>; + }; + + rpmhpd: power-controller { + compatible = "qcom,sc8280xp-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + rpmhpd_opp_nom_l2: opp8 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; + }; + + rpmhpd_opp_turbo: opp9 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + rpmhpd_opp_turbo_l1: opp10 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + }; + }; + }; + + cpufreq_hw: cpufreq@18591000 { + compatible = "qcom,sc8280xp-cpufreq-epss", "qcom,cpufreq-epss"; + reg = <0 0x18591000 0 0x1000>, + <0 0x18592000 0 0x1000>; + reg-names = "freq-domain0", "freq-domain1"; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; + clock-names = "xo", "alternate"; + + #freq-domain-cells = <1>; + }; + + remoteproc_nsp0: remoteproc@1b300000 { + compatible = "qcom,sc8280xp-nsp0-pas"; + reg = <0 0x1b300000 0 0x100>; + + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_nsp0_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_nsp0_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_nsp0_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_nsp0_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SC8280XP_NSP>; + power-domain-names = "nsp"; + + memory-region = <&pil_nsp0_mem>; + + qcom,smem-states = <&smp2p_nsp0_out 0>; + qcom,smem-state-names = "stop"; + + interconnects = <&nspa_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "nsp0"; + qcom,remote-pid = <5>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "cdsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x3181 0x0420>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x3182 0x0420>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x3183 0x0420>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x3184 0x0420>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x3185 0x0420>; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x3186 0x0420>; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x3187 0x0420>; + }; + + compute-cb@8 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <8>; + iommus = <&apps_smmu 0x3188 0x0420>; + }; + + compute-cb@9 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <9>; + iommus = <&apps_smmu 0x318b 0x0420>; + }; + + compute-cb@10 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <10>; + iommus = <&apps_smmu 0x318b 0x0420>; + }; + + compute-cb@11 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <11>; + iommus = <&apps_smmu 0x318c 0x0420>; + }; + + compute-cb@12 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <12>; + iommus = <&apps_smmu 0x318d 0x0420>; + }; + + compute-cb@13 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <13>; + iommus = <&apps_smmu 0x318e 0x0420>; + }; + + compute-cb@14 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <14>; + iommus = <&apps_smmu 0x318f 0x0420>; + }; + }; + }; + }; + + remoteproc_nsp1: remoteproc@21300000 { + compatible = "qcom,sc8280xp-nsp1-pas"; + reg = <0 0x21300000 0 0x100>; + + interrupts-extended = <&intc GIC_SPI 887 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_nsp1_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_nsp1_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_nsp1_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_nsp1_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SC8280XP_NSP>; + power-domain-names = "nsp"; + + memory-region = <&pil_nsp1_mem>; + + qcom,smem-states = <&smp2p_nsp1_out 0>; + qcom,smem-state-names = "stop"; + + interconnects = <&nspb_noc MASTER_CDSP_PROC_B 0 &mc_virt SLAVE_EBI1 0>; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_NSP1 + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_NSP1 + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "nsp1"; + qcom,remote-pid = <12>; + }; + }; + }; + + thermal-zones { + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 1>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 2>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 3>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 4>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu4-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 5>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu5-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 6>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu6-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 7>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu7-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 8>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cluster0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 9>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + mem-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 15>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/dts/src/arm64/qcom/sda660-inforce-ifc6560.dts b/dts/src/arm64/qcom/sda660-inforce-ifc6560.dts new file mode 100644 index 0000000000..28050bc5f0 --- /dev/null +++ b/dts/src/arm64/qcom/sda660-inforce-ifc6560.dts @@ -0,0 +1,461 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Linaro Ltd. + * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org> + * Copyright (c) 2020, AngeloGioacchino Del Regno + * <angelogioacchino.delregno@somainline.org> + */ + +/dts-v1/; + +#include "sdm660.dtsi" +#include "pm660.dtsi" +#include "pm660l.dtsi" + +/ { + model = "Inforce 6560 Single Board Computer"; + compatible = "inforce,ifc6560", "qcom,sda660"; + chassis-type = "embedded"; /* SBC */ + + aliases { + serial0 = &blsp1_uart2; + serial1 = &blsp2_uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + volup { + label = "Volume Up"; + gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + }; + }; + + /* + * Until we hook up type-c detection, we + * have to stick with this. But it works. + */ + extcon_usb: extcon-usb { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&tlmm 58 GPIO_ACTIVE_HIGH>; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&adv7533_out>; + }; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3800000>; + regulator-max-microvolt = <3800000>; + + regulator-always-on; + regulator-boot-on; + }; + + v3p3_bck_bst: v3p3-bck-bst-regulator { + compatible = "regulator-fixed"; + regulator-name = "v3p3_bck_bst"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + vin-supply = <&vph_pwr>; + }; + + v1p2_ldo: v1p2-ldo-regulator { + compatible = "regulator-fixed"; + regulator-name = "v1p2_ldo"; + + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + vin-supply = <&vph_pwr>; + }; + + v5p0_boost: v5p0-boost-regulator { + compatible = "regulator-fixed"; + regulator-name = "v5p0_boost"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + vin-supply = <&vph_pwr>; + }; +}; + +&adsp_pil { + firmware-name = "qcom/ifc6560/adsp.mbn"; +}; + +&blsp_i2c6 { + status = "okay"; + + adv7533: hdmi@39 { + compatible = "adi,adv7535"; + reg = <0x39>, <0x66>; + reg-names = "main", "edid"; + + interrupt-parent = <&pm660l_gpios>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + + clocks = <&rpmcc RPM_SMD_BB_CLK2>; + clock-names = "cec"; + /* + * Limit to 3 lanes to prevent the bridge from changing amount + * of lanes in the fly. MSM DSI host doesn't like that. + */ + adi,dsi-lanes = <3>; + avdd-supply = <&vreg_l13a_1p8>; + dvdd-supply = <&vreg_l13a_1p8>; + pvdd-supply = <&vreg_l13a_1p8>; + a2vdd-supply = <&vreg_l13a_1p8>; + v3p3-supply = <&v3p3_bck_bst>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adv7533_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + + adv7533_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; +}; + +&blsp1_dma { + /* + * The board will lock up if we toggle the BLSP clock, unless the + * BAM DMA interconnects support is in place. + */ + /delete-property/ clocks; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&blsp2_dma { + /* + * The board will lock up if we toggle the BLSP clock, unless the + * BAM DMA interconnects support is in place. + */ + /delete-property/ clocks; +}; + +&blsp2_uart1 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + vddio-supply = <&vreg_l13a_1p8>; + vddxo-supply = <&vreg_l9a_1p8>; + vddrf-supply = <&vreg_l6a_1p3>; + vddch0-supply = <&vreg_l19a_3p3>; + max-speed = <3200000>; + }; +}; + +&dsi0 { + status = "okay"; + vdda-supply = <&vreg_l1a_1p225>; +}; + +&dsi0_out { + remote-endpoint = <&adv7533_in>; + data-lanes = <0 1 2 3>; +}; + +&dsi0_phy { + status = "okay"; + vcca-supply = <&vreg_l1b_0p925>; +}; + +&mdss { + status = "okay"; +}; + +&mmss_smmu { + status = "okay"; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + status = "okay"; + + linux,code = <KEY_VOLUMEUP>; +}; + +&qusb2phy0 { + status = "okay"; + + vdd-supply = <&vreg_l1b_0p925>; + vdda-phy-dpdm-supply = <&vreg_l7b_3p125>; +}; + +&qusb2phy1 { + status = "okay"; + + vdd-supply = <&vreg_l1b_0p925>; + vdda-phy-dpdm-supply = <&vreg_l7b_3p125>; +}; + +&rpm_requests { + pm660-regulators { + compatible = "qcom,rpm-pm660-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + + vdd_l1_l6_l7-supply = <&vreg_s5a_1p35>; + vdd_l2_l3-supply = <&vreg_s2b_1p05>; + vdd_l5-supply = <&vreg_s2b_1p05>; + vdd_l8_l9_l10_l11_l12_l13_l14-supply = <&vreg_s4a_2p04>; + vdd_l15_l16_l17_l18_l19-supply = <&vreg_bob>; + + vreg_s4a_2p04: s4 { + regulator-min-microvolt = <1805000>; + regulator-max-microvolt = <2040000>; + regulator-enable-ramp-delay = <200>; + regulator-ramp-delay = <0>; + regulator-always-on; + }; + + vreg_s5a_1p35: s5 { + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1350000>; + regulator-enable-ramp-delay = <200>; + regulator-ramp-delay = <0>; + }; + + vreg_l1a_1p225: l1 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1250000>; + regulator-enable-ramp-delay = <250>; + regulator-allow-set-load; + }; + + vreg_l6a_1p3: l6 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1368000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + regulator-allow-set-load; + }; + + vreg_l8a_1p8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + regulator-system-load = <325000>; + regulator-allow-set-load; + }; + + vreg_l9a_1p8: l9 { + regulator-min-microvolt = <1804000>; + regulator-max-microvolt = <1896000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + regulator-allow-set-load; + }; + + vreg_l13a_1p8: l13 { + /* This gives power to the LPDDR4: never turn it off! */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1944000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + regulator-always-on; + regulator-boot-on; + }; + + vreg_l19a_3p3: l19 { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3400000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + regulator-allow-set-load; + }; + }; + + pm660l-regulators { + compatible = "qcom,rpm-pm660l-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + + vdd_l1_l9_l10-supply = <&vreg_s2b_1p05>; + vdd_l2-supply = <&vreg_bob>; + vdd_l3_l5_l7_l8-supply = <&vreg_bob>; + vdd_l4_l6-supply = <&vreg_bob>; + vdd_bob-supply = <&vph_pwr>; + + vreg_s2b_1p05: s2 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-enable-ramp-delay = <200>; + regulator-ramp-delay = <0>; + }; + + vreg_l1b_0p925: l1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <925000>; + regulator-enable-ramp-delay = <250>; + regulator-allow-set-load; + }; + + vreg_l2b_2p95: l2 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <3100000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + regulator-allow-set-load; + }; + + vreg_l4b_2p95: l4 { + regulator-min-microvolt = <2944000>; + regulator-max-microvolt = <2952000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + + regulator-min-microamp = <200>; + regulator-max-microamp = <600000>; + regulator-system-load = <570000>; + regulator-allow-set-load; + }; + + /* + * Downstream specifies a range of 1721-3600mV, + * but the only assigned consumers are SDHCI2 VMMC + * and Coresight QPDI that both request pinned 2.95V. + * Tighten the range to 1.8-3.328 (closest to 3.3) to + * make the mmc driver happy. + */ + vreg_l5b_2p95: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3328000>; + regulator-enable-ramp-delay = <250>; + regulator-system-load = <800000>; + regulator-ramp-delay = <0>; + regulator-allow-set-load; + }; + + vreg_l7b_3p125: l7 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3125000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l8b_3p3: l8 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3400000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + }; + + vreg_bob: bob { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3624000>; + regulator-enable-ramp-delay = <500>; + regulator-ramp-delay = <0>; + }; + }; +}; + +&sdc2_state_on { + sd-cd { + pins = "gpio54"; + bias-pull-up; + drive-strength = <2>; + }; +}; + +&sdc2_state_off { + sd-cd { + pins = "gpio54"; + bias-disable; + drive-strength = <2>; + }; +}; + +&sdhc_1 { + status = "okay"; + supports-cqe; + + vmmc-supply = <&vreg_l4b_2p95>; + vqmmc-supply = <&vreg_l8a_1p8>; + + mmc-ddr-1_8v; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; +}; + +&sdhc_2 { + status = "okay"; + + vmmc-supply = <&vreg_l5b_2p95>; + vqmmc-supply = <&vreg_l2b_2p95>; + + cd-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>; + no-sdio; + no-emmc; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <8 4>; +}; + +&usb2 { + status = "okay"; +}; + +&usb2_dwc3 { + dr_mode = "host"; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + dr_mode = "peripheral"; + extcon = <&extcon_usb>; +}; diff --git a/dts/src/arm64/qcom/sdm630-sony-xperia-nile.dtsi b/dts/src/arm64/qcom/sdm630-sony-xperia-nile.dtsi index 42af1fade4..09c0780079 100644 --- a/dts/src/arm64/qcom/sdm630-sony-xperia-nile.dtsi +++ b/dts/src/arm64/qcom/sdm630-sony-xperia-nile.dtsi @@ -10,6 +10,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/leds/common.h> / { /* required for bootloader to select correct board */ @@ -34,7 +35,7 @@ height = <1920>; stride = <(1080 * 4)>; format = "a8r8g8b8"; - status= "okay"; + status = "okay"; }; }; @@ -87,13 +88,10 @@ pinctrl-0 = <&imx300_vana_default>; }; - gpio_keys { - status = "okay"; + gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - camera_focus { + key-camera-focus { label = "Camera Focus"; gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; linux,input-type = <1>; @@ -101,7 +99,7 @@ debounce-interval = <15>; }; - camera_snapshot { + key-camera-snapshot { label = "Camera Snapshot"; gpios = <&tlmm 113 GPIO_ACTIVE_LOW>; linux,input-type = <1>; @@ -109,7 +107,7 @@ debounce-interval = <15>; }; - vol_down { + key-vol-down { label = "Volume Down"; gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>; linux,input-type = <1>; @@ -214,6 +212,35 @@ /* HCI Bluetooth */ }; +&pm660l_lpg { + qcom,power-source = <1>; + + status = "okay"; + + multi-led { + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_BLUE>; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@3 { + reg = <3>; + color = <LED_COLOR_ID_RED>; + }; + }; +}; + &pon_pwrkey { status = "okay"; }; @@ -224,7 +251,7 @@ linux,code = <KEY_VOLUMEUP>; }; -&qusb2phy { +&qusb2phy0 { status = "okay"; vdd-supply = <&vreg_l1b_0p925>; @@ -549,6 +576,22 @@ }; }; +&sdc2_state_on { + sd-cd { + pins = "gpio54"; + bias-pull-up; + drive-strength = <2>; + }; +}; + +&sdc2_state_off { + sd-cd { + pins = "gpio54"; + bias-disable; + drive-strength = <2>; + }; +}; + &sdhc_1 { status = "okay"; supports-cqe; diff --git a/dts/src/arm64/qcom/sdm630.dtsi b/dts/src/arm64/qcom/sdm630.dtsi index b72e8e6c52..1bc9091cad 100644 --- a/dts/src/arm64/qcom/sdm630.dtsi +++ b/dts/src/arm64/qcom/sdm630.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/clock/qcom,gpucc-sdm660.h> #include <dt-bindings/clock/qcom,mmcc-sdm660.h> #include <dt-bindings/clock/qcom,rpmcc.h> +#include <dt-bindings/interconnect/qcom,sdm660.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -552,19 +553,19 @@ }; qfprom: qfprom@780000 { - compatible = "qcom,qfprom"; + compatible = "qcom,sdm630-qfprom", "qcom,qfprom"; reg = <0x00780000 0x621c>; #address-cells = <1>; #size-cells = <1>; qusb2_hstx_trim: hstx-trim@240 { - reg = <0x240 0x1>; - bits = <25 3>; + reg = <0x243 0x1>; + bits = <1 3>; }; gpu_speed_bin: gpu-speed-bin@41a0 { - reg = <0x41a0 0x1>; - bits = <21 7>; + reg = <0x41a2 0x1>; + bits = <5 7>; }; }; @@ -982,12 +983,6 @@ bias-pull-up; drive-strength = <10>; }; - - sd-cd { - pins = "gpio54"; - bias-pull-up; - drive-strength = <2>; - }; }; sdc2_state_off: sdc2-off { @@ -1008,12 +1003,6 @@ bias-pull-up; drive-strength = <2>; }; - - sd-cd { - pins = "gpio54"; - bias-disable; - drive-strength = <2>; - }; }; }; @@ -1045,13 +1034,15 @@ nvmem-cells = <&gpu_speed_bin>; nvmem-cell-names = "speed_bin"; - interconnects = <&gnoc 1 &bimc 5>; + interconnects = <&bimc MASTER_OXILI &bimc SLAVE_EBI>; interconnect-names = "gfx-mem"; operating-points-v2 = <&gpu_sdm630_opp_table>; + status = "disabled"; + gpu_sdm630_opp_table: opp-table { - compatible = "operating-points-v2"; + compatible = "operating-points-v2"; opp-775000000 { opp-hz = /bits/ 64 <775000000>; opp-level = <RPM_SMD_LEVEL_TURBO>; @@ -1252,19 +1243,19 @@ * haven't seen any devices making use of it. */ maximum-speed = "high-speed"; - phys = <&qusb2phy>; + phys = <&qusb2phy0>; phy-names = "usb2-phy"; snps,hird-threshold = /bits/ 8 <0>; }; }; - qusb2phy: phy@c012000 { + qusb2phy0: phy@c012000 { compatible = "qcom,sdm660-qusb2-phy"; reg = <0x0c012000 0x180>; #phy-cells = <0>; clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, - <&gcc GCC_RX1_USB2_CLKREF_CLK>; + <&gcc GCC_RX0_USB2_CLKREF_CLK>; clock-names = "cfg_ahb", "ref"; resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; @@ -1272,7 +1263,21 @@ status = "disabled"; }; - sdhc_2: sdhci@c084000 { + qusb2phy1: phy@c014000 { + compatible = "qcom,sdm660-qusb2-phy"; + reg = <0x0c014000 0x180>; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_RX1_USB2_CLKREF_CLK>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; + nvmem-cells = <&qusb2_hstx_trim>; + status = "disabled"; + }; + + sdhc_2: mmc@c084000 { compatible = "qcom,sdm630-sdhci", "qcom,sdhci-msm-v5"; reg = <0x0c084000 0x1000>; reg-names = "hc"; @@ -1282,13 +1287,16 @@ interrupt-names = "hc_irq", "pwr_irq"; bus-width = <4>; - clocks = <&gcc GCC_SDCC2_APPS_CLK>, - <&gcc GCC_SDCC2_AHB_CLK>, + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, <&xo_board>; - clock-names = "core", "iface", "xo"; + clock-names = "iface", "core", "xo"; + interconnects = <&a2noc 3 &a2noc 10>, <&gnoc 0 &cnoc 28>; + interconnect-names = "sdhc-ddr","cpu-sdhc"; operating-points-v2 = <&sdhc2_opp_table>; pinctrl-names = "default", "sleep"; @@ -1322,7 +1330,7 @@ }; }; - sdhc_1: sdhci@c0c4000 { + sdhc_1: mmc@c0c4000 { compatible = "qcom,sdm630-sdhci", "qcom,sdhci-msm-v5"; reg = <0x0c0c4000 0x1000>, <0x0c0c5000 0x1000>, @@ -1333,15 +1341,15 @@ <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC1_APPS_CLK>, - <&gcc GCC_SDCC1_AHB_CLK>, + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, <&xo_board>, <&gcc GCC_SDCC1_ICE_CORE_CLK>; - clock-names = "core", "iface", "xo", "ice"; + clock-names = "iface", "core", "xo", "ice"; interconnects = <&a2noc 2 &a2noc 10>, <&gnoc 0 &cnoc 27>; - interconnect-names = "sdhc1-ddr", "cpu-sdhc1"; + interconnect-names = "sdhc-ddr", "cpu-sdhc"; operating-points-v2 = <&sdhc1_opp_table>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&sdc1_state_on>; @@ -1377,6 +1385,47 @@ }; }; + usb2: usb@c2f8800 { + compatible = "qcom,sdm660-dwc3", "qcom,dwc3"; + reg = <0x0c2f8800 0x400>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB2_AXI_CLK>, + <&gcc GCC_USB20_MASTER_CLK>, + <&gcc GCC_USB20_MOCK_UTMI_CLK>, + <&gcc GCC_USB20_SLEEP_CLK>; + clock-names = "cfg_noc", "core", + "mock_utmi", "sleep"; + + assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>, + <&gcc GCC_USB20_MASTER_CLK>; + assigned-clock-rates = <19200000>, <60000000>; + + interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq"; + + qcom,select-utmi-as-pipe-clk; + + resets = <&gcc GCC_USB_20_BCR>; + + usb2_dwc3: usb@c200000 { + compatible = "snps,dwc3"; + reg = <0x0c200000 0xc8d0>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + + /* This is the HS-only host */ + maximum-speed = "high-speed"; + phys = <&qusb2phy1>; + phy-names = "usb2-phy"; + snps,hird-threshold = /bits/ 8 <0>; + }; + }; + mmcc: clock-controller@c8c0000 { compatible = "qcom,mmcc-sdm630"; reg = <0x0c8c0000 0x40000>; @@ -1405,7 +1454,7 @@ <0>; }; - dsi_opp_table: dsi-opp-table { + dsi_opp_table: opp-table-dsi { compatible = "operating-points-v2"; opp-131250000 { @@ -1494,7 +1543,7 @@ }; }; - mdp_opp_table: mdp-opp { + mdp_opp_table: opp-table { compatible = "operating-points-v2"; opp-150000000 { @@ -1563,6 +1612,8 @@ phys = <&dsi0_phy>; phy-names = "dsi"; + status = "disabled"; + ports { #address-cells = <1>; #size-cells = <0>; @@ -1596,6 +1647,7 @@ clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>; clock-names = "iface", "ref"; + status = "disabled"; }; }; @@ -1829,8 +1881,8 @@ status = "disabled"; }; - imem@146bf000 { - compatible = "simple-mfd"; + sram@146bf000 { + compatible = "qcom,sdm630-imem", "syscon", "simple-mfd"; reg = <0x146bf000 0x1000>; #address-cells = <1>; @@ -1846,138 +1898,138 @@ camss: camss@ca00000 { compatible = "qcom,sdm660-camss"; - reg = <0x0c824000 0x1000>, + reg = <0x0ca00020 0x10>, + <0x0ca30000 0x100>, + <0x0ca30400 0x100>, + <0x0ca30800 0x100>, + <0x0ca30c00 0x100>, + <0x0c824000 0x1000>, <0x0ca00120 0x4>, <0x0c825000 0x1000>, <0x0ca00124 0x4>, <0x0c826000 0x1000>, <0x0ca00128 0x4>, - <0x0ca30000 0x100>, - <0x0ca30400 0x100>, - <0x0ca30800 0x100>, - <0x0ca30c00 0x100>, <0x0ca31000 0x500>, - <0x0ca00020 0x10>, <0x0ca10000 0x1000>, <0x0ca14000 0x1000>; - reg-names = "csiphy0", + reg-names = "csi_clk_mux", + "csid0", + "csid1", + "csid2", + "csid3", + "csiphy0", "csiphy0_clk_mux", "csiphy1", "csiphy1_clk_mux", "csiphy2", "csiphy2_clk_mux", - "csid0", - "csid1", - "csid2", - "csid3", "ispif", - "csi_clk_mux", "vfe0", "vfe1"; - interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>, + interrupts = <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 297 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 298 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 299 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 309 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 314 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 315 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "csiphy0", - "csiphy1", - "csiphy2", - "csid0", + interrupt-names = "csid0", "csid1", "csid2", "csid3", + "csiphy0", + "csiphy1", + "csiphy2", "ispif", "vfe0", "vfe1"; - clocks = <&mmcc CAMSS_TOP_AHB_CLK>, - <&mmcc THROTTLE_CAMSS_AXI_CLK>, - <&mmcc CAMSS_ISPIF_AHB_CLK>, - <&mmcc CAMSS_CSI0PHYTIMER_CLK>, - <&mmcc CAMSS_CSI1PHYTIMER_CLK>, - <&mmcc CAMSS_CSI2PHYTIMER_CLK>, - <&mmcc CAMSS_CSI0_AHB_CLK>, - <&mmcc CAMSS_CSI0_CLK>, - <&mmcc CAMSS_CPHY_CSID0_CLK>, - <&mmcc CAMSS_CSI0PIX_CLK>, - <&mmcc CAMSS_CSI0RDI_CLK>, - <&mmcc CAMSS_CSI1_AHB_CLK>, - <&mmcc CAMSS_CSI1_CLK>, - <&mmcc CAMSS_CPHY_CSID1_CLK>, - <&mmcc CAMSS_CSI1PIX_CLK>, - <&mmcc CAMSS_CSI1RDI_CLK>, - <&mmcc CAMSS_CSI2_AHB_CLK>, - <&mmcc CAMSS_CSI2_CLK>, - <&mmcc CAMSS_CPHY_CSID2_CLK>, - <&mmcc CAMSS_CSI2PIX_CLK>, - <&mmcc CAMSS_CSI2RDI_CLK>, - <&mmcc CAMSS_CSI3_AHB_CLK>, - <&mmcc CAMSS_CSI3_CLK>, - <&mmcc CAMSS_CPHY_CSID3_CLK>, - <&mmcc CAMSS_CSI3PIX_CLK>, - <&mmcc CAMSS_CSI3RDI_CLK>, - <&mmcc CAMSS_AHB_CLK>, - <&mmcc CAMSS_VFE0_CLK>, - <&mmcc CAMSS_CSI_VFE0_CLK>, - <&mmcc CAMSS_VFE0_AHB_CLK>, - <&mmcc CAMSS_VFE0_STREAM_CLK>, - <&mmcc CAMSS_VFE1_CLK>, - <&mmcc CAMSS_CSI_VFE1_CLK>, - <&mmcc CAMSS_VFE1_AHB_CLK>, - <&mmcc CAMSS_VFE1_STREAM_CLK>, - <&mmcc CAMSS_VFE_VBIF_AHB_CLK>, - <&mmcc CAMSS_VFE_VBIF_AXI_CLK>, - <&mmcc CSIPHY_AHB2CRIF_CLK>, - <&mmcc CAMSS_CPHY_CSID0_CLK>, - <&mmcc CAMSS_CPHY_CSID1_CLK>, - <&mmcc CAMSS_CPHY_CSID2_CLK>, - <&mmcc CAMSS_CPHY_CSID3_CLK>; - clock-names = "top_ahb", - "throttle_axi", - "ispif_ahb", - "csiphy0_timer", - "csiphy1_timer", - "csiphy2_timer", - "csi0_ahb", - "csi0", - "csi0_phy", - "csi0_pix", - "csi0_rdi", - "csi1_ahb", - "csi1", - "csi1_phy", - "csi1_pix", - "csi1_rdi", - "csi2_ahb", - "csi2", - "csi2_phy", - "csi2_pix", - "csi2_rdi", - "csi3_ahb", - "csi3", - "csi3_phy", - "csi3_pix", - "csi3_rdi", - "ahb", - "vfe0", - "csi_vfe0", - "vfe0_ahb", - "vfe0_stream", - "vfe1", - "csi_vfe1", - "vfe1_ahb", - "vfe1_stream", - "vfe_ahb", - "vfe_axi", - "csiphy_ahb2crif", - "cphy_csid0", - "cphy_csid1", - "cphy_csid2", - "cphy_csid3"; + clocks = <&mmcc CAMSS_AHB_CLK>, + <&mmcc CAMSS_CPHY_CSID0_CLK>, + <&mmcc CAMSS_CPHY_CSID1_CLK>, + <&mmcc CAMSS_CPHY_CSID2_CLK>, + <&mmcc CAMSS_CPHY_CSID3_CLK>, + <&mmcc CAMSS_CSI0_AHB_CLK>, + <&mmcc CAMSS_CSI0_CLK>, + <&mmcc CAMSS_CPHY_CSID0_CLK>, + <&mmcc CAMSS_CSI0PIX_CLK>, + <&mmcc CAMSS_CSI0RDI_CLK>, + <&mmcc CAMSS_CSI1_AHB_CLK>, + <&mmcc CAMSS_CSI1_CLK>, + <&mmcc CAMSS_CPHY_CSID1_CLK>, + <&mmcc CAMSS_CSI1PIX_CLK>, + <&mmcc CAMSS_CSI1RDI_CLK>, + <&mmcc CAMSS_CSI2_AHB_CLK>, + <&mmcc CAMSS_CSI2_CLK>, + <&mmcc CAMSS_CPHY_CSID2_CLK>, + <&mmcc CAMSS_CSI2PIX_CLK>, + <&mmcc CAMSS_CSI2RDI_CLK>, + <&mmcc CAMSS_CSI3_AHB_CLK>, + <&mmcc CAMSS_CSI3_CLK>, + <&mmcc CAMSS_CPHY_CSID3_CLK>, + <&mmcc CAMSS_CSI3PIX_CLK>, + <&mmcc CAMSS_CSI3RDI_CLK>, + <&mmcc CAMSS_CSI0PHYTIMER_CLK>, + <&mmcc CAMSS_CSI1PHYTIMER_CLK>, + <&mmcc CAMSS_CSI2PHYTIMER_CLK>, + <&mmcc CSIPHY_AHB2CRIF_CLK>, + <&mmcc CAMSS_CSI_VFE0_CLK>, + <&mmcc CAMSS_CSI_VFE1_CLK>, + <&mmcc CAMSS_ISPIF_AHB_CLK>, + <&mmcc THROTTLE_CAMSS_AXI_CLK>, + <&mmcc CAMSS_TOP_AHB_CLK>, + <&mmcc CAMSS_VFE0_AHB_CLK>, + <&mmcc CAMSS_VFE0_CLK>, + <&mmcc CAMSS_VFE0_STREAM_CLK>, + <&mmcc CAMSS_VFE1_AHB_CLK>, + <&mmcc CAMSS_VFE1_CLK>, + <&mmcc CAMSS_VFE1_STREAM_CLK>, + <&mmcc CAMSS_VFE_VBIF_AHB_CLK>, + <&mmcc CAMSS_VFE_VBIF_AXI_CLK>; + clock-names = "ahb", + "cphy_csid0", + "cphy_csid1", + "cphy_csid2", + "cphy_csid3", + "csi0_ahb", + "csi0", + "csi0_phy", + "csi0_pix", + "csi0_rdi", + "csi1_ahb", + "csi1", + "csi1_phy", + "csi1_pix", + "csi1_rdi", + "csi2_ahb", + "csi2", + "csi2_phy", + "csi2_pix", + "csi2_rdi", + "csi3_ahb", + "csi3", + "csi3_phy", + "csi3_pix", + "csi3_rdi", + "csiphy0_timer", + "csiphy1_timer", + "csiphy2_timer", + "csiphy_ahb2crif", + "csi_vfe0", + "csi_vfe1", + "ispif_ahb", + "throttle_axi", + "top_ahb", + "vfe0_ahb", + "vfe0", + "vfe0_stream", + "vfe1_ahb", + "vfe1", + "vfe1_stream", + "vfe_ahb", + "vfe_axi"; interconnects = <&mnoc 5 &bimc 5>; interconnect-names = "vfe-mem"; iommus = <&mmss_smmu 0xc00>, @@ -2158,8 +2210,6 @@ label = "lpass"; mboxes = <&apcs_glb 9>; qcom,remote-pid = <2>; - #address-cells = <1>; - #size-cells = <0>; apr { compatible = "qcom,apr-v2"; diff --git a/dts/src/arm64/qcom/sdm632-fairphone-fp3.dts b/dts/src/arm64/qcom/sdm632-fairphone-fp3.dts index 8b815b2a60..891e314bc7 100644 --- a/dts/src/arm64/qcom/sdm632-fairphone-fp3.dts +++ b/dts/src/arm64/qcom/sdm632-fairphone-fp3.dts @@ -27,7 +27,7 @@ gpio-keys { compatible = "gpio-keys"; - volume-up { + key-volume-up { label = "volume_up"; linux,code = <KEY_VOLUMEUP>; gpios = <&tlmm 85 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm64/qcom/sdm636-sony-xperia-ganges-mermaid.dts b/dts/src/arm64/qcom/sdm636-sony-xperia-ganges-mermaid.dts index b96da53f2f..58f687fc49 100644 --- a/dts/src/arm64/qcom/sdm636-sony-xperia-ganges-mermaid.dts +++ b/dts/src/arm64/qcom/sdm636-sony-xperia-ganges-mermaid.dts @@ -19,7 +19,7 @@ }; &sdc2_state_on { - pinconf-clk { + clk { drive-strength = <14>; }; }; diff --git a/dts/src/arm64/qcom/sdm660-xiaomi-lavender.dts b/dts/src/arm64/qcom/sdm660-xiaomi-lavender.dts index dcbaacf18f..a3559f6e34 100644 --- a/dts/src/arm64/qcom/sdm660-xiaomi-lavender.dts +++ b/dts/src/arm64/qcom/sdm660-xiaomi-lavender.dts @@ -51,7 +51,7 @@ gpio-keys { compatible = "gpio-keys"; - volup { + key-volup { label = "Volume Up"; gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; @@ -103,7 +103,7 @@ linux,code = <KEY_VOLUMEDOWN>; }; -&qusb2phy { +&qusb2phy0 { status = "okay"; vdd-supply = <&vreg_l1b_0p925>; @@ -363,6 +363,30 @@ }; }; +&pm660l_wled { + status = "okay"; + + qcom,switching-freq = <800>; + qcom,current-limit-microamp = <20000>; + qcom,num-strings = <2>; +}; + +&sdc2_state_on { + sd-cd { + pins = "gpio54"; + bias-pull-up; + drive-strength = <2>; + }; +}; + +&sdc2_state_off { + sd-cd { + pins = "gpio54"; + bias-disable; + drive-strength = <2>; + }; +}; + &sdhc_1 { status = "okay"; supports-cqe; diff --git a/dts/src/arm64/qcom/sdm660.dtsi b/dts/src/arm64/qcom/sdm660.dtsi index 1d748c5305..43220af1b6 100644 --- a/dts/src/arm64/qcom/sdm660.dtsi +++ b/dts/src/arm64/qcom/sdm660.dtsi @@ -14,7 +14,7 @@ operating-points-v2 = <&gpu_sdm660_opp_table>; gpu_sdm660_opp_table: opp-table { - compatible = "operating-points-v2"; + compatible = "operating-points-v2"; /* * 775MHz is only available on the highest speed bin @@ -192,6 +192,8 @@ phys = <&dsi1_phy>; phy-names = "dsi"; + status = "disabled"; + ports { #address-cells = <1>; #size-cells = <0>; @@ -225,6 +227,7 @@ clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>; clock-names = "iface", "ref"; + status = "disabled"; }; }; diff --git a/dts/src/arm64/qcom/sdm845-cheza.dtsi b/dts/src/arm64/qcom/sdm845-cheza.dtsi index e7e4cc5936..b5eb8f7eca 100644 --- a/dts/src/arm64/qcom/sdm845-cheza.dtsi +++ b/dts/src/arm64/qcom/sdm845-cheza.dtsi @@ -119,7 +119,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pen_eject_odl>; - pen-insert { + switch-pen-insert { label = "Pen Insert"; /* Insert = low, eject = high */ gpios = <&tlmm 119 GPIO_ACTIVE_LOW>; @@ -130,7 +130,7 @@ }; panel: panel { - compatible ="innolux,p120zdg-bf1"; + compatible = "innolux,p120zdg-bf1"; power-supply = <&pp3300_dx_edp>; backlight = <&backlight>; no-hpd; @@ -145,6 +145,138 @@ }; }; +&psci { + /delete-node/ cpu0; + /delete-node/ cpu1; + /delete-node/ cpu2; + /delete-node/ cpu3; + /delete-node/ cpu4; + /delete-node/ cpu5; + /delete-node/ cpu6; + /delete-node/ cpu7; + /delete-node/ cpu-cluster0; +}; + +&cpus { + /delete-node/ domain-idle-states; +}; + +&cpu_idle_states { + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "little-power-down"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <350>; + exit-latency-us = <461>; + min-residency-us = <1890>; + local-timer-stop; + }; + + LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 { + compatible = "arm,idle-state"; + idle-state-name = "little-rail-power-down"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <360>; + exit-latency-us = <531>; + min-residency-us = <3934>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "big-power-down"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <264>; + exit-latency-us = <621>; + min-residency-us = <952>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_1: cpu-sleep-1-1 { + compatible = "arm,idle-state"; + idle-state-name = "big-rail-power-down"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <702>; + exit-latency-us = <1061>; + min-residency-us = <4488>; + local-timer-stop; + }; + + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "arm,idle-state"; + idle-state-name = "cluster-power-down"; + arm,psci-suspend-param = <0x400000F4>; + entry-latency-us = <3263>; + exit-latency-us = <6562>; + min-residency-us = <9987>; + local-timer-stop; + }; +}; + +&CPU0 { + /delete-property/ power-domains; + /delete-property/ power-domain-names; + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 + &LITTLE_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; +}; + +&CPU1 { + /delete-property/ power-domains; + /delete-property/ power-domain-names; + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 + &LITTLE_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; +}; + +&CPU2 { + /delete-property/ power-domains; + /delete-property/ power-domain-names; + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 + &LITTLE_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; +}; + +&CPU3 { + /delete-property/ power-domains; + /delete-property/ power-domain-names; + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 + &LITTLE_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; +}; + +&CPU4 { + /delete-property/ power-domains; + /delete-property/ power-domain-names; + cpu-idle-states = <&BIG_CPU_SLEEP_0 + &BIG_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; +}; + +&CPU5 { + /delete-property/ power-domains; + /delete-property/ power-domain-names; + cpu-idle-states = <&BIG_CPU_SLEEP_0 + &BIG_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; +}; + +&CPU6 { + /delete-property/ power-domains; + /delete-property/ power-domain-names; + cpu-idle-states = <&BIG_CPU_SLEEP_0 + &BIG_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; +}; + +&CPU7 { + /delete-property/ power-domains; + /delete-property/ power-domain-names; + cpu-idle-states = <&BIG_CPU_SLEEP_0 + &BIG_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; +}; + /* * Reserved memory changes * diff --git a/dts/src/arm64/qcom/sdm845-db845c.dts b/dts/src/arm64/qcom/sdm845-db845c.dts index 194ebeb325..c6e2c571b4 100644 --- a/dts/src/arm64/qcom/sdm845-db845c.dts +++ b/dts/src/arm64/qcom/sdm845-db845c.dts @@ -5,6 +5,7 @@ /dts-v1/; +#include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include <dt-bindings/sound/qcom,q6afe.h> @@ -43,14 +44,14 @@ regulator-always-on; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; autorepeat; pinctrl-names = "default"; pinctrl-0 = <&vol_up_pin_a>; - vol-up { + key-vol-up { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; @@ -60,22 +61,28 @@ leds { compatible = "gpio-leds"; - user4 { + led-0 { label = "green:user4"; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_GREEN>; gpios = <&pm8998_gpio 13 GPIO_ACTIVE_HIGH>; linux,default-trigger = "panic-indicator"; default-state = "off"; }; - wlan { + led-1 { label = "yellow:wlan"; + function = LED_FUNCTION_WLAN; + color = <LED_COLOR_ID_YELLOW>; gpios = <&pm8998_gpio 9 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy0tx"; default-state = "off"; }; - bt { + led-2 { label = "blue:bt"; + function = LED_FUNCTION_BLUETOOTH; + color = <LED_COLOR_ID_BLUE>; gpios = <&pm8998_gpio 5 GPIO_ACTIVE_HIGH>; linux,default-trigger = "bluetooth-power"; default-state = "off"; @@ -436,6 +443,10 @@ status = "okay"; }; +&gpi_dma1 { + status = "okay"; +}; + &gpu { status = "okay"; zap-shader { @@ -488,12 +499,14 @@ &i2c11 { /* On Low speed expansion */ + clock-frequency = <100000>; label = "LS-I2C1"; status = "okay"; }; &i2c14 { /* On Low speed expansion */ + clock-frequency = <100000>; label = "LS-I2C0"; status = "okay"; }; @@ -569,7 +582,7 @@ "OPTION2", "PM845_SLB"; - cam0_dvdd_1v2_en_default: cam0-dvdd-1v2-en { + cam0_dvdd_1v2_en_default: cam0-dvdd-1v2-en-state { pins = "gpio12"; function = "normal"; @@ -578,7 +591,7 @@ qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; }; - cam0_avdd_2v8_en_default: cam0-avdd-2v8-en { + cam0_avdd_2v8_en_default: cam0-avdd-2v8-en-state { pins = "gpio10"; function = "normal"; @@ -587,7 +600,7 @@ qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; }; - vol_up_pin_a: vol-up-active { + vol_up_pin_a: vol-up-active-state { pins = "gpio6"; function = "normal"; input-enable; @@ -606,10 +619,40 @@ }; }; +&pmi8998_lpg { + status = "okay"; + + qcom,power-source = <1>; + + led@3 { + reg = <3>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_HEARTBEAT; + function-enumerator = <3>; + + linux,default-trigger = "heartbeat"; + default-state = "on"; + }; + + led@4 { + reg = <4>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <2>; + }; + + led@5 { + reg = <5>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <1>; + }; +}; + /* QUAT I2S Uses 4 I2S SD Lines for audio on LT9611 HDMI Bridge */ &q6afedai { qi2s@22 { - reg = <22>; + reg = <QUATERNARY_MI2S_RX>; qcom,sd-lines = <0 1 2 3>; }; }; @@ -718,7 +761,7 @@ }; codec { - sound-dai = <<9611_codec 0>; + sound-dai = <<9611_codec 0>; }; }; @@ -733,7 +776,7 @@ }; codec { - sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>; + sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>; }; }; @@ -1144,7 +1187,8 @@ }; &camss { - vdda-supply = <&vreg_l1a_0p875>; + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l26a_1p2>; status = "ok"; diff --git a/dts/src/arm64/qcom/sdm845-lg-common.dtsi b/dts/src/arm64/qcom/sdm845-lg-common.dtsi new file mode 100644 index 0000000000..20f275f869 --- /dev/null +++ b/dts/src/arm64/qcom/sdm845-lg-common.dtsi @@ -0,0 +1,614 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SDM845 LG G7 / V35 (judyln / judyp) common device tree + * + * Copyright (c) 2022, The Linux Foundation. All rights reserved. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> + +#include "sdm845.dtsi" +#include "pm8998.dtsi" +#include "pmi8998.dtsi" + +/delete-node/ &adsp_mem; +/delete-node/ &cdsp_mem; +/delete-node/ &gpu_mem; +/delete-node/ &ipa_fw_mem; +/delete-node/ &mba_region; +/delete-node/ &mpss_region; +/delete-node/ &qseecom_mem; +/delete-node/ &rmtfs_mem; +/delete-node/ &slpi_mem; +/delete-node/ &spss_mem; +/delete-node/ &venus_mem; +/delete-node/ &wlan_msa_mem; + +/ { + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + qseecom_mem: memory@b2000000 { + reg = <0 0xb2000000 0 0x1800000>; + no-map; + }; + + gpu_mem: memory@8c415000 { + reg = <0 0x8c415000 0 0x2000>; + no-map; + }; + + ipa_fw_mem: memory@8c400000 { + reg = <0 0x8c400000 0 0x10000>; + no-map; + }; + + adsp_mem: memory@8c500000 { + reg = <0 0x8c500000 0 0x1e00000>; + no-map; + }; + + wlan_msa_mem: memory@8e300000 { + reg = <0 0x8e300000 0 0x100000>; + no-map; + }; + + mpss_region: memory@8e400000 { + reg = <0 0x8e400000 0 0x8900000>; + no-map; + }; + + venus_mem: memory@96d00000 { + reg = <0 0x96d00000 0 0x500000>; + no-map; + }; + + cdsp_mem: memory@97200000 { + reg = <0 0x97200000 0 0x800000>; + no-map; + }; + + mba_region: memory@97a00000 { + reg = <0 0x97a00000 0 0x200000>; + no-map; + }; + + slpi_mem: memory@97c00000 { + reg = <0 0x97c00000 0 0x1400000>; + no-map; + }; + + spss_mem: memory@99000000 { + reg = <0 0x99000000 0 0x100000>; + no-map; + }; + + /* Framebuffer region */ + memory@9d400000 { + reg = <0x0 0x9d400000 0x0 0x2400000>; + no-map; + }; + + /* rmtfs lower guard */ + memory@f0800000 { + reg = <0 0xf0800000 0 0x1000>; + no-map; + }; + + rmtfs_mem: memory@f0801000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0xf0801000 0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + + /* rmtfs upper guard */ + memory@f0a01000 { + reg = <0 0xf0a01000 0 0x1000>; + no-map; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&vol_up_pin_a>; + + label = "GPIO Buttons"; + + key-vol-up { + label = "Volume up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + /* + * Apparently RPMh does not provide support for PM8998 S4 because it + * is always-on; model it as a fixed regulator. + */ + vreg_s4a_1p8: pm8998-smps4-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; +}; + +&adsp_pas { + status = "okay"; +}; + +&apps_rsc { + pm8998-rpmh-regulators { + compatible = "qcom,pm8998-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + vdd-s13-supply = <&vph_pwr>; + vdd-l1-l27-supply = <&vreg_s7a_1p025>; + vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>; + vdd-l3-l11-supply = <&vreg_s7a_1p025>; + vdd-l4-l5-supply = <&vreg_s7a_1p025>; + vdd-l6-supply = <&vph_pwr>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; + vdd-l9-supply = <&vreg_bob>; + vdd-l10-l23-l25-supply = <&vreg_bob>; + vdd-l13-l19-l21-supply = <&vreg_bob>; + vdd-l16-l28-supply = <&vreg_bob>; + vdd-l18-l22-supply = <&vreg_bob>; + vdd-l20-l24-supply = <&vreg_bob>; + vdd-l26-supply = <&vreg_s3a_1p35>; + vin-lvs-1-2-supply = <&vreg_s4a_1p8>; + + vreg_s2a_1p125: smps2 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + vreg_s3a_1p35: smps3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_s5a_2p04: smps5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7a_1p025: smps7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + + vdd_qusb_hs0: + vdda_hp_pcie_core: + vdda_mipi_csi0_0p9: + vdda_mipi_csi1_0p9: + vdda_mipi_csi2_0p9: + vdda_mipi_dsi0_pll: + vdda_mipi_dsi1_pll: + vdda_qlink_lv: + vdda_qlink_lv_ck: + vdda_qrefs_0p875: + vdda_pcie_core: + vdda_pll_cc_ebi01: + vdda_pll_cc_ebi23: + vdda_sp_sensor: + vdda_ufs1_core: + vdda_ufs2_core: + vdda_usb1_ss_core: + vdda_usb2_ss_core: + vreg_l1a_0p875: ldo1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_10: + vreg_l2a_1p2: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l3a_1p0: ldo3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_wcss_cx: + vdd_wcss_mx: + vdda_wcss_pll: + vreg_l5a_0p8: ldo5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_13: + vreg_l6a_1p8: ldo6 { + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <1856000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8a_1p2: ldo8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1248000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9a_1p8: ldo9 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10a_1p8: ldo10 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11a_1p0: ldo11 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1048000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_qfprom: + vdd_qfprom_sp: + vdda_apc1_cs_1p8: + vdda_gfx_cs_1p8: + vdda_qrefs_1p8: + vdda_qusb_hs0_1p8: + vddpx_11: + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_2: + vreg_l13a_2p95: ldo13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14a_1p88: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15a_1p8: ldo15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17a_1p3: ldo17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18a_2p7: ldo18 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l20a_2p95: ldo20 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l21a_2p95: ldo21 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l22a_2p85: ldo22 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l23a_3p3: ldo23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_qusb_hs0_3p1: + vreg_l24a_3p075: ldo24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l25a_3p3: ldo25 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_hp_pcie_1p2: + vdda_hv_ebi0: + vdda_hv_ebi1: + vdda_hv_ebi2: + vdda_hv_ebi3: + vdda_mipi_csi_1p25: + vdda_mipi_dsi0_1p2: + vdda_mipi_dsi1_1p2: + vdda_pcie_1p2: + vdda_ufs1_1p2: + vdda_ufs2_1p2: + vdda_usb1_ss_1p2: + vdda_usb2_ss_1p2: + vreg_l26a_1p2: ldo26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l28a_3p0: ldo28 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_lvs1a_1p8: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + + pmi8998-rpmh-regulators { + compatible = "qcom,pmi8998-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3600000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-bypass; + }; + }; + + pm8005-rpmh-regulators { + compatible = "qcom,pm8005-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + + vreg_s3c_0p6: smps3 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <600000>; + }; + }; +}; + +&cdsp_pas { + status = "okay"; +}; + +&dispcc { + status = "disabled"; +}; + +&gcc { + protected-clocks = <GCC_QSPI_CORE_CLK>, + <GCC_QSPI_CORE_CLK_SRC>, + <GCC_QSPI_CNOC_PERIPH_AHB_CLK>, + <GCC_LPASS_Q6_AXI_CLK>, + <GCC_LPASS_SWAY_CLK>; +}; + +&gpu { + status = "okay"; + + zap-shader { + memory-region = <&gpu_mem>; + }; +}; + +&ipa { + status = "okay"; + modem-init; +}; + +&mss_pil { + status = "okay"; +}; + +&pm8998_pon { + resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_VOLUMEDOWN>; + }; +}; + +&sdhc_2 { + status = "okay"; + + cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data &sd_card_det_n>; + + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vddpx_2>; +}; + +/* + * UFS works partially and only with clk_ignore_unused. + * Sometimes it crashes with I/O errors. + */ +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l20a_2p95>; + vcc-max-microamp = <600000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vdda_ufs1_core>; + vdda-pll-supply = <&vdda_ufs1_1p2>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + /* TODO: these devices have usb id pin */ + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdd-supply = <&vdda_usb1_ss_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>; + qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>; + qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vdda_usb1_ss_1p2>; + vdda-pll-supply = <&vdda_usb1_ss_core>; +}; + +/* PINCTRL - additions to nodes defined in sdm845.dtsi */ + +&tlmm { + gpio-reserved-ranges = <28 4>, <81 4>; + + sdc2_clk: sdc2-clk { + pinconf { + pins = "sdc2_clk"; + bias-disable; + + /* + * It seems that mmc_test reports errors if drive + * strength is not 16 on clk, cmd, and data pins. + * + * TODO: copy-pasted from mtp, try other values + * on these devices. + */ + drive-strength = <16>; + }; + }; + + sdc2_cmd: sdc2-cmd { + pinconf { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <16>; + }; + }; + + sdc2_data: sdc2-data { + pinconf { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <16>; + }; + }; + + sd_card_det_n: sd-card-det-n { + pinmux { + pins = "gpio126"; + function = "gpio"; + }; + + pinconf { + pins = "gpio126"; + bias-pull-up; + }; + }; +}; + +&pm8998_gpio { + vol_up_pin_a: vol-up-active-pins { + pins = "gpio6"; + function = "normal"; + input-enable; + bias-pull-up; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + }; +}; diff --git a/dts/src/arm64/qcom/sdm845-lg-judyln.dts b/dts/src/arm64/qcom/sdm845-lg-judyln.dts new file mode 100644 index 0000000000..7d967a104b --- /dev/null +++ b/dts/src/arm64/qcom/sdm845-lg-judyln.dts @@ -0,0 +1,68 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SDM845 LG G7 (judyln) device tree. + * + * Copyright (c) 2022, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include "sdm845-lg-common.dtsi" + +/ { + model = "LG G7 ThinQ"; + compatible = "lg,judyln", "qcom,sdm845"; + + chosen { + framebuffer@9d400000 { + compatible = "simple-framebuffer"; + reg = <0x0 0x9d400000 0x0 (1440 * 3120 * 4)>; + width = <1440>; + height = <3120>; + stride = <(1440 * 4)>; + format = "a8r8g8b8"; + lab-supply = <&lab>; + ibb-supply = <&ibb>; + }; + }; + + /* Additional ThinQ key */ + gpio-keys { + pinctrl-0 = <&vol_up_pin_a &thinq_key_default>; + + key-thinq { + label = "ThinQ"; + linux,code = <KEY_ASSISTANT>; + interrupt-parent = <&tlmm>; + interrupts = <89 IRQ_TYPE_LEVEL_LOW>; + }; + }; +}; + +&adsp_pas { + firmware-name = "qcom/sdm845/judyln/adsp.mbn"; +}; + +&cdsp_pas { + firmware-name = "qcom/sdm845/judyln/cdsp.mbn"; +}; + +&gpu { + zap-shader { + firmware-name = "qcom/sdm845/judyln/a630_zap.mbn"; + }; +}; + +&mss_pil { + firmware-name = "qcom/sdm845/judyln/mba.mbn", "qcom/sdm845/judyln/modem.mbn"; +}; + +&tlmm { + thinq_key_default: thinq-key-default { + pins = "gpio89"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; +}; diff --git a/dts/src/arm64/qcom/sdm845-lg-judyp.dts b/dts/src/arm64/qcom/sdm845-lg-judyp.dts new file mode 100644 index 0000000000..d17d4d4d56 --- /dev/null +++ b/dts/src/arm64/qcom/sdm845-lg-judyp.dts @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SDM845 LG V35 (judyp) device tree. + * + * Copyright (c) 2022, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include "sdm845-lg-common.dtsi" + +/ { + model = "LG V35 ThinQ"; + compatible = "lg,judyp", "qcom,sdm845"; + + chosen { + framebuffer@9d400000 { + compatible = "simple-framebuffer"; + reg = <0x0 0x9d400000 0x0 (1440 * 2880 * 4)>; + width = <1440>; + height = <2880>; + stride = <(1440 * 4)>; + format = "a8r8g8b8"; + }; + }; +}; + +&adsp_pas { + firmware-name = "qcom/sdm845/judyp/adsp.mbn"; +}; + +&cdsp_pas { + firmware-name = "qcom/sdm845/judyp/cdsp.mbn"; +}; + +&gpu { + zap-shader { + firmware-name = "qcom/sdm845/judyp/a630_zap.mbn"; + }; +}; + +&mss_pil { + firmware-name = "qcom/sdm845/judyp/mba.mbn", "qcom/sdm845/judyp/modem.mbn"; +}; diff --git a/dts/src/arm64/qcom/sdm845-oneplus-common.dtsi b/dts/src/arm64/qcom/sdm845-oneplus-common.dtsi index 07b729f9fe..392461c29e 100644 --- a/dts/src/arm64/qcom/sdm845-oneplus-common.dtsi +++ b/dts/src/arm64/qcom/sdm845-oneplus-common.dtsi @@ -34,14 +34,14 @@ pinctrl-names = "default"; pinctrl-0 = <&volume_down_gpio &volume_up_gpio>; - vol-down { + key-vol-down { label = "Volume down"; linux,code = <KEY_VOLUMEDOWN>; gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>; debounce-interval = <15>; }; - vol-up { + key-vol-up { label = "Volume up"; linux,code = <KEY_VOLUMEUP>; gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; @@ -440,7 +440,7 @@ }; &pm8998_gpio { - volume_down_gpio: pm8998_gpio5 { + volume_down_gpio: pm8998-gpio5-state { pinconf { pins = "gpio5"; function = "normal"; @@ -450,7 +450,7 @@ }; }; - volume_up_gpio: pm8998_gpio6 { + volume_up_gpio: pm8998-gpio6-state { pinconf { pins = "gpio6"; function = "normal"; diff --git a/dts/src/arm64/qcom/sdm845-shift-axolotl.dts b/dts/src/arm64/qcom/sdm845-shift-axolotl.dts index 103cc40816..83261c9bb4 100644 --- a/dts/src/arm64/qcom/sdm845-shift-axolotl.dts +++ b/dts/src/arm64/qcom/sdm845-shift-axolotl.dts @@ -2,11 +2,13 @@ /* * Copyright (c) 2022, Alexander Martinz <amartinz@shiftphones.com> * Copyright (c) 2022, Caleb Connolly <caleb@connolly.tech> + * Copyright (c) 2022, Dylan Van Assche <me@dylanvanassche.be> */ /dts-v1/; #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sdm845.dtsi" #include "pm8998.dtsi" @@ -48,7 +50,7 @@ pinctrl-names = "default"; pinctrl-0 = <&volume_up_gpio>; - vol-up { + key-vol-up { label = "volume_up"; linux,code = <KEY_VOLUMEUP>; gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; @@ -468,7 +470,7 @@ }; &i2c5 { - status="okay"; + status = "okay"; touchscreen@38 { compatible = "focaltech,fts8719"; @@ -508,7 +510,7 @@ }; &pm8998_gpio { - volume_up_gpio: pm8998_gpio6 { + volume_up_gpio: pm8998-gpio6-state { pinconf { pins = "gpio6"; function = "normal"; @@ -529,6 +531,33 @@ }; }; +&pmi8998_lpg { + status = "okay"; + + multi-led { + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@3 { + reg = <3>; + color = <LED_COLOR_ID_BLUE>; + }; + + led@4 { + reg = <4>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@5 { + reg = <5>; + color = <LED_COLOR_ID_RED>; + }; + }; +}; + &qup_uart9_default { pinconf-rx { pins = "gpio5"; diff --git a/dts/src/arm64/qcom/sdm845-sony-xperia-tama-akatsuki.dts b/dts/src/arm64/qcom/sdm845-sony-xperia-tama-akatsuki.dts index 8a0d94e7f5..2f5e12deaa 100644 --- a/dts/src/arm64/qcom/sdm845-sony-xperia-tama-akatsuki.dts +++ b/dts/src/arm64/qcom/sdm845-sony-xperia-tama-akatsuki.dts @@ -19,8 +19,9 @@ }; &vreg_l22a_2p8 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; + /* Note: Round-down from 2700000 to be a multiple of PLDO step-size 8000 */ + regulator-min-microvolt = <2696000>; + regulator-max-microvolt = <2696000>; }; &vreg_l28a_2p8 { diff --git a/dts/src/arm64/qcom/sdm845-sony-xperia-tama.dtsi b/dts/src/arm64/qcom/sdm845-sony-xperia-tama.dtsi index 281fe6dea6..51ee42e3c9 100644 --- a/dts/src/arm64/qcom/sdm845-sony-xperia-tama.dtsi +++ b/dts/src/arm64/qcom/sdm845-sony-xperia-tama.dtsi @@ -19,7 +19,7 @@ /* Neither Camera Focus, nor Camera Shutter seem to work... */ - vol-down { + key-vol-down { label = "volume_down"; gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; diff --git a/dts/src/arm64/qcom/sdm845-xiaomi-beryllium.dts b/dts/src/arm64/qcom/sdm845-xiaomi-beryllium.dts index d88dc07205..82c27f90d3 100644 --- a/dts/src/arm64/qcom/sdm845-xiaomi-beryllium.dts +++ b/dts/src/arm64/qcom/sdm845-xiaomi-beryllium.dts @@ -45,7 +45,7 @@ pinctrl-names = "default"; pinctrl-0 = <&vol_up_pin_a>; - vol-up { + key-vol-up { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; @@ -306,7 +306,7 @@ }; &pm8998_gpio { - vol_up_pin_a: vol-up-active { + vol_up_pin_a: vol-up-active-state { pins = "gpio6"; function = "normal"; input-enable; @@ -339,7 +339,7 @@ /* QUAT I2S Uses 1 I2S SD Line for audio on TAS2559/60 amplifiers */ &q6afedai { qi2s@22 { - reg = <22>; + reg = <QUATERNARY_MI2S_RX>; qcom,sd-lines = <0>; }; }; @@ -419,7 +419,7 @@ }; codec { - sound-dai = <&wcd9340 0>; + sound-dai = <&wcd9340 0>; }; }; diff --git a/dts/src/arm64/qcom/sdm845-xiaomi-polaris.dts b/dts/src/arm64/qcom/sdm845-xiaomi-polaris.dts new file mode 100644 index 0000000000..7747081b98 --- /dev/null +++ b/dts/src/arm64/qcom/sdm845-xiaomi-polaris.dts @@ -0,0 +1,762 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Xilin Wu <strongtz@yeah.net> + * Copyright (c) 2022, Molly Sophia <mollysophia379@gmail.com> + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/sound/qcom,q6afe.h> +#include <dt-bindings/sound/qcom,q6asm.h> +#include "sdm845.dtsi" +#include "pm8998.dtsi" +#include "pmi8998.dtsi" +#include "pm8005.dtsi" + +/* + * Delete following upstream (sdm845.dtsi) reserved + * memory mappings which are different in this device. + */ +/delete-node/ &rmtfs_mem; +/delete-node/ &adsp_mem; +/delete-node/ &wlan_msa_mem; +/delete-node/ &mpss_region; +/delete-node/ &venus_mem; +/delete-node/ &cdsp_mem; +/delete-node/ &mba_region; +/delete-node/ &slpi_mem; +/delete-node/ &spss_mem; + +/ { + model = "Xiaomi Mi MIX 2S"; + compatible = "xiaomi,polaris", "qcom,sdm845"; + chassis-type = "handset"; + + /* required for bootloader to select correct board */ + qcom,msm-id = <0x141 0x20001>; + qcom,board-id = <0x2a 0x0>; + + aliases { + serial0 = &uart9; + serial1 = &uart6; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&volume_up_gpio>; + + key-vol-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + }; + }; + + reserved-memory { + adsp_mem: memory@8c500000 { + reg = <0 0x8c500000 0 0x1e00000>; + no-map; + }; + + wlan_msa_mem: memory@8e300000 { + reg = <0 0x8e300000 0 0x100000>; + no-map; + }; + + mpss_region: memory@8e400000 { + reg = <0 0x8e400000 0 0x7800000>; + no-map; + }; + + venus_mem: memory@95c00000 { + reg = <0 0x95c00000 0 0x500000>; + no-map; + }; + + cdsp_mem: memory@96100000 { + reg = <0 0x96100000 0 0x800000>; + no-map; + }; + + mba_region: memory@96900000 { + reg = <0 0x96900000 0 0x200000>; + no-map; + }; + + slpi_mem: memory@96b00000 { + reg = <0 0x96b00000 0 0x1400000>; + no-map; + }; + + spss_mem: memory@97f00000 { + reg = <0 0x97f00000 0 0x100000>; + no-map; + }; + + rmtfs_mem: memory@f6301000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0xf6301000 0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + }; + + battery: battery { + compatible = "simple-battery"; + + charge-full-design-microamp-hours = <3400000>; + voltage-min-design-microvolt = <3400000>; + voltage-max-design-microvolt = <4400000>; + }; + + vreg_tp_vddio: vreg-tp-vddio { + compatible = "regulator-fixed"; + regulator-name = "vreg_tp_vddio"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 23 0>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + }; + + vreg_s4a_1p8: vreg-s4a-1p8 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; +}; + +&apps_rsc { + pm8998-rpmh-regulators { + compatible = "qcom,pm8998-rpmh-regulators"; + qcom,pmic-id = "a"; + + vreg_s2a_1p1: smps2 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + vreg_s3a_1p35: smps3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_s5a_2p04: smps5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7a_1p025: smps7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + + vdda_mipi_dsi0_pll: + vdda_ufs1_core: + vreg_l1a_0p875: ldo1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2a_1p2: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l3a_1p0: ldo3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5a_0p8: ldo5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6a_1p8: ldo6 { + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <1856000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8a_1p2: ldo8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1248000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9a_1p8: ldo9 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10a_2p95: ldo10 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11a_1p05: ldo11 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1048000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13a_2p95: ldo13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14a_1p8: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l15a_1p8: ldo15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16a_2p7: ldo16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17a_1p3: ldo17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l18a_2p9: ldo18 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l19a_3p1: ldo19 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l20a_2p95: ldo20 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l21a_2p95: ldo21 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l22a_3p3: ldo22 { + regulator-min-microvolt = <2864000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l23a_3p3: ldo23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l24a_3p075: ldo24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l25a_3p3: ldo25 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vdda_mipi_dsi0_1p2: + vdda_ufs1_1p2: + vreg_l26a_1p2: ldo26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l28a_3p0: ldo28 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_lvs1a_1p8: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + + pmi8998-rpmh-regulators { + compatible = "qcom,pmi8998-rpmh-regulators"; + qcom,pmic-id = "b"; + + vreg_bob: bob { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3600000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-bypass; + }; + }; + + pm8005-rpmh-regulators { + compatible = "qcom,pm8005-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_smp3c_0p6: smps3 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <600000>; + regulator-always-on; + }; + }; +}; + +&cdsp_pas { + firmware-name = "qcom/sdm845/polaris/cdsp.mbn"; + status = "okay"; +}; + +&dsi0 { + vdda-supply = <&vdda_mipi_dsi0_1p2>; + status = "okay"; + + display_panel: panel@0 { + compatible = "jdi,fhd-nt35596s"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; + vddio-supply = <&vreg_l14a_1p8>; + backlight = <&pmi8998_wled>; + vddpos-supply = <&lab>; + vddneg-supply = <&ibb>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sde_dsi_active>; + pinctrl-1 = <&sde_dsi_suspend>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; +}; + +&dsi0_out { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; +}; + +&dsi0_phy { + vdds-supply = <&vdda_mipi_dsi0_pll>; + status = "okay"; +}; + +&gcc { + protected-clocks = <GCC_QSPI_CORE_CLK>, + <GCC_QSPI_CORE_CLK_SRC>, + <GCC_QSPI_CNOC_PERIPH_AHB_CLK>, + <GCC_LPASS_Q6_AXI_CLK>, + <GCC_LPASS_SWAY_CLK>; +}; + +&gmu { + status = "okay"; +}; + +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&gpu { + status = "okay"; + + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sdm845/polaris/a630_zap.mbn"; + }; +}; + +&ibb { + regulator-min-microvolt = <4600000>; + regulator-max-microvolt = <6000000>; + regulator-over-current-protection; + regulator-pull-down; + regulator-soft-start; + qcom,discharge-resistor-kohms = <300>; +}; + +&ipa { + memory-region = <&ipa_fw_mem>; + firmware-name = "qcom/sdm845/polaris/ipa_fws.mbn"; + status = "okay"; +}; + +&i2c14 { + clock-frequency = <400000>; + dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>, + <&gpi_dma1 1 6 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "okay"; + + touchscreen@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts-extended = <&tlmm 125 0x2008>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&ts_int_default &ts_reset_default>; + pinctrl-1 = <&ts_int_sleep &ts_reset_sleep>; + + vdd-supply = <&vreg_l28a_3p0>; + vio-supply = <&vreg_tp_vddio>; + + syna,startup-delay-ms = <0xc8>; + syna,reset-delay-ms = <0xc8>; + + rmi4-f01@1 { + syna,nosleep-mode = <0x1>; + reg = <0x1>; + }; + + rmi4-f12@12 { + syna,rezero-wait-ms = <0xc8>; + syna,clip-x-high = <0x438>; + syna,clip-y-high = <0x870>; + syna,sensor-type = <0x1>; + syna,clip-x-low = <0x0>; + syna,clip-y-low = <0x0>; + }; + }; +}; + +&lab { + regulator-min-microvolt = <4600000>; + regulator-max-microvolt = <6000000>; + regulator-soft-start; + regulator-pull-down; +}; + +&mdss { + status = "okay"; +}; + +&mss_pil { + firmware-name = "qcom/sdm845/polaris/mba.mbn", "qcom/sdm845/polaris/modem.mbn"; + status = "okay"; +}; + +&pmi8998_wled { + qcom,current-limit-microamp = <20000>; + qcom,current-boost-limit = <970>; + qcom,ovp-millivolt = <19600>; + qcom,switching-freq = <600>; + qcom,num-strings = <4>; + qcom,cabc; + + status = "okay"; +}; + +&pm8998_gpio { + volume_up_gpio: pm8998_gpio6 { + pinconf { + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + function = "normal"; + pins = "gpio6"; + input-enable; + bias-pull-up; + }; + }; +}; + +&pm8998_pon { + resin { + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + compatible = "qcom,pm8941-resin"; + linux,code = <KEY_VOLUMEDOWN>; + debounce = <15625>; + bias-pull-up; + }; +}; + +&q6afedai { + qi2s@22 { + reg = <22>; + qcom,sd-lines = <0>; + }; +}; + +&q6asmdai { + dai@0 { + reg = <0>; + }; + + dai@1 { + reg = <1>; + }; + + dai@2 { + reg = <2>; + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&qup_i2c14_default { + pinconf { + pins = "gpio33", "gpio34"; + drive-strength = <2>; + bias-disable; + }; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <81 4>; + + ts_reset_default: ts-reset-default { + pins = "gpio99"; + function = "gpio"; + drive-strength = <16>; + output-high; + }; + + ts_int_default: ts-int-default { + pins = "gpio125"; + function = "gpio"; + bias-pull-down; + drive-strength = <16>; + input-enable; + }; + + ts_reset_sleep: ts-reset-sleep { + pins = "gpio99"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + + ts_int_sleep: ts-int-sleep { + pins = "gpio125"; + function = "gpio"; + bias-pull-down; + drive-strength = <2>; + input-enable; + }; + + sde_dsi_active: sde-dsi-active { + pins = "gpio6", "gpio10"; + function = "gpio"; + drive-strength = <8>; + bias-disable = <0>; + }; + + sde_dsi_suspend: sde-dsi-suspend { + pins = "gpio6", "gpio10"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + wcd_intr_default: wcd-intr-default { + pins = "goui54"; + function = "gpio"; + input-enable; + bias-pull-down; + drive-strength = <2>; + }; +}; + +&uart6 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + /* This path is relative to the qca/ subdir under lib/firmware. */ + firmware-name = "polaris/crnv21.bin"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + max-speed = <3200000>; + }; +}; + +&usb_1 { + /* We'll use this as USB 2.0 only */ + qcom,select-utmi-as-pipe-clk; + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; + + /* Fastest mode for USB 2 */ + maximum-speed = "high-speed"; + + /* Remove USB3 phy */ + phys = <&usb_1_hsphy>; + phy-names = "usb2-phy"; +}; + +&usb_1_hsphy { + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; + vdda-pll-supply = <&vreg_l12a_1p8>; + vdd-supply = <&vreg_l1a_0p875>; + + qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>; + qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>; + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>; + qcom,imp-res-offset-value = <8>; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-pll-supply = <&vreg_l1a_0p875>; + vdda-phy-supply = <&vreg_l26a_1p2>; + status = "okay"; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; + vcc-supply = <&vreg_l20a_2p95>; + vcc-max-microamp = <800000>; + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vdda_ufs1_core>; + vdda-pll-supply = <&vdda_ufs1_1p2>; + status = "okay"; +}; + +&venus { + firmware-name = "qcom/sdm845/polaris/venus.mbn"; + status = "okay"; +}; + +&wcd9340 { + pinctrl-0 = <&wcd_intr_default>; + pinctrl-names = "default"; + clock-names = "extclk"; + clocks = <&rpmhcc RPMH_LN_BB_CLK2>; + reset-gpios = <&tlmm 64 0>; + vdd-buck-sido-supply = <&vreg_s4a_1p8>; + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-tx-supply = <&vreg_s4a_1p8>; + vdd-rx-supply = <&vreg_s4a_1p8>; + vdd-io-supply = <&vreg_s4a_1p8>; + + qcom,micbias1-microvolt = <2700000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <2700000>; + qcom,micbias4-microvolt = <2700000>; +}; + +&wifi { + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; + vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; + + qcom,snoc-host-cap-skip-quirk; + status = "okay"; +}; + +/* PINCTRL - additions to nodes defined in sdm845.dtsi */ + +&qup_uart6_default { + pinmux { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + function = "qup6"; + }; + + cts { + pins = "gpio45"; + bias-disable; + }; + + rts-tx { + pins = "gpio46", "gpio47"; + drive-strength = <2>; + bias-disable; + }; + + rx { + pins = "gpio48"; + bias-pull-up; + }; +}; diff --git a/dts/src/arm64/qcom/sdm845.dtsi b/dts/src/arm64/qcom/sdm845.dtsi index 038538c8c6..f0e286715d 100644 --- a/dts/src/arm64/qcom/sdm845.dtsi +++ b/dts/src/arm64/qcom/sdm845.dtsi @@ -188,7 +188,7 @@ }; }; - cpus { + cpus: cpus { #address-cells = <2>; #size-cells = <0>; @@ -197,15 +197,14 @@ compatible = "qcom,kryo385"; reg = <0x0 0x0>; enable-method = "psci"; - cpu-idle-states = <&LITTLE_CPU_SLEEP_0 - &LITTLE_CPU_SLEEP_1 - &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <611>; dynamic-power-coefficient = <290>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; #cooling-cells = <2>; next-level-cache = <&L2_0>; L2_0: l2-cache { @@ -222,15 +221,14 @@ compatible = "qcom,kryo385"; reg = <0x0 0x100>; enable-method = "psci"; - cpu-idle-states = <&LITTLE_CPU_SLEEP_0 - &LITTLE_CPU_SLEEP_1 - &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <611>; dynamic-power-coefficient = <290>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; #cooling-cells = <2>; next-level-cache = <&L2_100>; L2_100: l2-cache { @@ -244,15 +242,14 @@ compatible = "qcom,kryo385"; reg = <0x0 0x200>; enable-method = "psci"; - cpu-idle-states = <&LITTLE_CPU_SLEEP_0 - &LITTLE_CPU_SLEEP_1 - &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <611>; dynamic-power-coefficient = <290>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; #cooling-cells = <2>; next-level-cache = <&L2_200>; L2_200: l2-cache { @@ -266,9 +263,6 @@ compatible = "qcom,kryo385"; reg = <0x0 0x300>; enable-method = "psci"; - cpu-idle-states = <&LITTLE_CPU_SLEEP_0 - &LITTLE_CPU_SLEEP_1 - &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <611>; dynamic-power-coefficient = <290>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -276,6 +270,8 @@ interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; next-level-cache = <&L2_300>; L2_300: l2-cache { compatible = "cache"; @@ -289,14 +285,13 @@ reg = <0x0 0x400>; enable-method = "psci"; capacity-dmips-mhz = <1024>; - cpu-idle-states = <&BIG_CPU_SLEEP_0 - &BIG_CPU_SLEEP_1 - &CLUSTER_SLEEP_0>; dynamic-power-coefficient = <442>; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD4>; + power-domain-names = "psci"; #cooling-cells = <2>; next-level-cache = <&L2_400>; L2_400: l2-cache { @@ -311,14 +306,13 @@ reg = <0x0 0x500>; enable-method = "psci"; capacity-dmips-mhz = <1024>; - cpu-idle-states = <&BIG_CPU_SLEEP_0 - &BIG_CPU_SLEEP_1 - &CLUSTER_SLEEP_0>; dynamic-power-coefficient = <442>; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD5>; + power-domain-names = "psci"; #cooling-cells = <2>; next-level-cache = <&L2_500>; L2_500: l2-cache { @@ -333,14 +327,13 @@ reg = <0x0 0x600>; enable-method = "psci"; capacity-dmips-mhz = <1024>; - cpu-idle-states = <&BIG_CPU_SLEEP_0 - &BIG_CPU_SLEEP_1 - &CLUSTER_SLEEP_0>; dynamic-power-coefficient = <442>; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD6>; + power-domain-names = "psci"; #cooling-cells = <2>; next-level-cache = <&L2_600>; L2_600: l2-cache { @@ -355,14 +348,13 @@ reg = <0x0 0x700>; enable-method = "psci"; capacity-dmips-mhz = <1024>; - cpu-idle-states = <&BIG_CPU_SLEEP_0 - &BIG_CPU_SLEEP_1 - &CLUSTER_SLEEP_0>; dynamic-power-coefficient = <442>; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD7>; + power-domain-names = "psci"; #cooling-cells = <2>; next-level-cache = <&L2_700>; L2_700: l2-cache { @@ -407,53 +399,35 @@ }; }; - idle-states { + cpu_idle_states: idle-states { entry-method = "psci"; LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { compatible = "arm,idle-state"; - idle-state-name = "little-power-down"; - arm,psci-suspend-param = <0x40000003>; + idle-state-name = "little-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; entry-latency-us = <350>; exit-latency-us = <461>; min-residency-us = <1890>; local-timer-stop; }; - LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 { - compatible = "arm,idle-state"; - idle-state-name = "little-rail-power-down"; - arm,psci-suspend-param = <0x40000004>; - entry-latency-us = <360>; - exit-latency-us = <531>; - min-residency-us = <3934>; - local-timer-stop; - }; - BIG_CPU_SLEEP_0: cpu-sleep-1-0 { compatible = "arm,idle-state"; - idle-state-name = "big-power-down"; - arm,psci-suspend-param = <0x40000003>; + idle-state-name = "big-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; entry-latency-us = <264>; exit-latency-us = <621>; min-residency-us = <952>; local-timer-stop; }; + }; - BIG_CPU_SLEEP_1: cpu-sleep-1-1 { - compatible = "arm,idle-state"; - idle-state-name = "big-rail-power-down"; - arm,psci-suspend-param = <0x40000004>; - entry-latency-us = <702>; - exit-latency-us = <1061>; - min-residency-us = <4488>; - local-timer-stop; - }; - + domain-idle-states { CLUSTER_SLEEP_0: cluster-sleep-0 { - compatible = "arm,idle-state"; - idle-state-name = "cluster-power-down"; - arm,psci-suspend-param = <0x400000F4>; + compatible = "domain-idle-state"; + idle-state-name = "cluster-power-collapse"; + arm,psci-suspend-param = <0x4100c244>; entry-latency-us = <3263>; exit-latency-us = <6562>; min-residency-us = <9987>; @@ -462,7 +436,7 @@ }; }; - cpu0_opp_table: cpu0_opp_table { + cpu0_opp_table: opp-table-cpu0 { compatible = "operating-points-v2"; opp-shared; @@ -557,7 +531,7 @@ }; }; - cpu4_opp_table: cpu4_opp_table { + cpu4_opp_table: opp-table-cpu4 { compatible = "operating-points-v2"; opp-shared; @@ -1050,9 +1024,62 @@ }; }; - psci { + psci: psci { compatible = "arm,psci-1.0"; method = "smc"; + + CPU_PD0: power-domain-cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD1: power-domain-cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD2: power-domain-cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD3: power-domain-cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD4: power-domain-cpu4 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD5: power-domain-cpu5 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD6: power-domain-cpu6 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD7: power-domain-cpu7 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CLUSTER_PD: power-domain-cluster { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP_0>; + }; }; soc: soc@0 { @@ -1104,7 +1131,7 @@ clock-names = "core"; }; - qup_opp_table: qup-opp-table { + qup_opp_table: opp-table-qup { compatible = "operating-points-v2"; opp-50000000 { @@ -1181,6 +1208,9 @@ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, + <&gpi_dma0 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1235,6 +1265,9 @@ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, + <&gpi_dma0 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1251,6 +1284,9 @@ interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, + <&gpi_dma0 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1286,6 +1322,9 @@ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, + <&gpi_dma0 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1302,6 +1341,9 @@ interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, + <&gpi_dma0 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1337,6 +1379,9 @@ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, + <&gpi_dma0 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1353,6 +1398,9 @@ interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, + <&gpi_dma0 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1388,6 +1436,9 @@ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, + <&gpi_dma0 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1404,6 +1455,9 @@ interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, + <&gpi_dma0 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1439,6 +1493,9 @@ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, + <&gpi_dma0 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1455,6 +1512,9 @@ interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, + <&gpi_dma0 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1490,6 +1550,9 @@ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>, + <&gpi_dma0 1 6 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1506,6 +1569,9 @@ interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>, + <&gpi_dma0 1 6 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1553,6 +1619,9 @@ interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>, + <&gpi_dma0 1 7 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1626,6 +1695,9 @@ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, + <&gpi_dma1 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1642,6 +1714,9 @@ interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, + <&gpi_dma1 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1677,6 +1752,9 @@ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, + <&gpi_dma1 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1693,6 +1771,9 @@ interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, + <&gpi_dma1 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1728,6 +1809,9 @@ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, + <&gpi_dma1 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1744,6 +1828,9 @@ interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, + <&gpi_dma1 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1779,6 +1866,9 @@ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, + <&gpi_dma1 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1795,6 +1885,9 @@ interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, + <&gpi_dma1 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1830,6 +1923,9 @@ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, + <&gpi_dma1 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1846,6 +1942,9 @@ interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, + <&gpi_dma1 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1881,6 +1980,9 @@ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, + <&gpi_dma1 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1897,6 +1999,9 @@ interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>, + <&gpi_dma1 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1932,6 +2037,9 @@ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>, + <&gpi_dma1 1 6 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1948,6 +2056,9 @@ interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>, + <&gpi_dma1 1 6 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1984,6 +2095,9 @@ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>, + <&gpi_dma1 1 7 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; }; spi15: spi@a9c000 { @@ -1999,6 +2113,9 @@ interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>, + <&gpi_dma1 1 7 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -2026,6 +2143,43 @@ interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; }; + pmu@1436400 { + compatible = "qcom,sdm845-bwmon", "qcom,msm8998-bwmon"; + reg = <0 0x01436400 0 0x600>; + interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_LLCC 3>; + + operating-points-v2 = <&cpu_bwmon_opp_table>; + + cpu_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + /* + * The interconnect path bandwidth taken from + * cpu4_opp_table bandwidth for OSM L3 + * interconnect. This also matches the OSM L3 + * from bandwidth table of qcom,cpu4-l3lat-mon + * (qcom,core-dev-table, bus width: 16 bytes) + * from msm-4.9 downstream kernel. + */ + opp-0 { + opp-peak-kBps = <4800000>; + }; + opp-1 { + opp-peak-kBps = <9216000>; + }; + opp-2 { + opp-peak-kBps = <15052800>; + }; + opp-3 { + opp-peak-kBps = <20889600>; + }; + opp-4 { + opp-peak-kBps = <25497600>; + }; + }; + }; + pcie0: pci@1c00000 { compatible = "qcom,pcie-sdm845"; reg = <0 0x01c00000 0 0x2000>, @@ -3551,7 +3705,7 @@ }; }; - sdhc_2: sdhci@8804000 { + sdhc_2: mmc@8804000 { compatible = "qcom,sdm845-sdhci", "qcom,sdhci-msm-v5"; reg = <0 0x08804000 0 0x1000>; @@ -3569,7 +3723,7 @@ status = "disabled"; - sdhc2_opp_table: sdhc2-opp-table { + sdhc2_opp_table: opp-table { compatible = "operating-points-v2"; opp-9600000 { @@ -3594,7 +3748,7 @@ }; }; - qspi_opp_table: qspi-opp-table { + qspi_opp_table: opp-table-qspi { compatible = "operating-points-v2"; opp-19200000 { @@ -3640,7 +3794,7 @@ qcom,apps-ch-pipes = <0x780000>; qcom,ea-pc = <0x270>; status = "okay"; - dmas = <&slimbam 3>, <&slimbam 4>, + dmas = <&slimbam 3>, <&slimbam 4>, <&slimbam 5>, <&slimbam 6>; dma-names = "rx", "tx", "tx2", "rx2"; @@ -3655,13 +3809,13 @@ wcd9340_ifd: ifd@0{ compatible = "slim217,250"; - reg = <0 0>; + reg = <0 0>; }; wcd9340: codec@1{ compatible = "slim217,250"; - reg = <1 0>; - slim-ifc-dev = <&wcd9340_ifd>; + reg = <1 0>; + slim-ifc-dev = <&wcd9340_ifd>; #sound-dai-cells = <1>; @@ -3692,8 +3846,8 @@ reg = <0xc85 0x40>; interrupts-extended = <&wcd9340 20>; - qcom,dout-ports = <6>; - qcom,din-ports = <2>; + qcom,dout-ports = <6>; + qcom,din-ports = <2>; qcom,ports-sinterval-low =/bits/ 8 <0x07 0x1F 0x3F 0x7 0x1F 0x3F 0x0F 0x0F>; qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0C 0x6 0x12 0x0D 0x07 0x0A >; qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x1F 0x00 0x00 0x1F 0x00 0x00>; @@ -3971,7 +4125,7 @@ compatible = "venus-encoder"; }; - venus_opp_table: venus-opp-table { + venus_opp_table: opp-table { compatible = "operating-points-v2"; opp-100000000 { @@ -4208,7 +4362,7 @@ clock-names = "bi_tcxo"; }; - dsi_opp_table: dsi-opp-table { + dsi_opp_table: opp-table-dsi { compatible = "operating-points-v2"; opp-19200000 { @@ -4248,9 +4402,6 @@ <&dispcc DISP_CC_MDSS_MDP_CLK>; clock-names = "iface", "core"; - assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>; - assigned-clock-rates = <300000000>; - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <1>; @@ -4268,7 +4419,7 @@ #size-cells = <2>; ranges; - mdss_mdp: mdp@ae01000 { + mdss_mdp: display-controller@ae01000 { compatible = "qcom,sdm845-dpu"; reg = <0 0x0ae01000 0 0x8f000>, <0 0x0aeb0000 0 0x2008>; @@ -4281,10 +4432,8 @@ <&dispcc DISP_CC_MDSS_VSYNC_CLK>; clock-names = "gcc-bus", "iface", "bus", "core", "vsync"; - assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>, - <&dispcc DISP_CC_MDSS_VSYNC_CLK>; - assigned-clock-rates = <300000000>, - <19200000>; + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; operating-points-v2 = <&mdp_opp_table>; power-domains = <&rpmhpd SDM845_CX>; @@ -4310,7 +4459,7 @@ }; }; - mdp_opp_table: mdp-opp-table { + mdp_opp_table: opp-table { compatible = "operating-points-v2"; opp-19200000 { @@ -4574,7 +4723,7 @@ }; gmu: gmu@506a000 { - compatible="qcom,adreno-gmu-630.2", "qcom,adreno-gmu"; + compatible = "qcom,adreno-gmu-630.2", "qcom,adreno-gmu"; reg = <0 0x506a000 0 0x30000>, <0 0xb280000 0 0x10000>, @@ -4721,8 +4870,8 @@ cell-index = <0>; }; - imem@146bf000 { - compatible = "simple-mfd"; + sram@146bf000 { + compatible = "qcom,sdm845-imem", "syscon", "simple-mfd"; reg = <0 0x146bf000 0 0x1000>; #address-cells = <1>; @@ -4939,7 +5088,7 @@ compatible = "qcom,bam-v1.7.0"; qcom,controlled-remotely; reg = <0 0x17184000 0 0x2a000>; - num-channels = <31>; + num-channels = <31>; interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; qcom,ee = <1>; @@ -4948,9 +5097,9 @@ }; timer@17c90000 { - #address-cells = <2>; - #size-cells = <2>; - ranges; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0x20000000>; compatible = "arm,armv7-timer-mem"; reg = <0 0x17c90000 0 0x1000>; @@ -4958,49 +5107,49 @@ frame-number = <0>; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; - reg = <0 0x17ca0000 0 0x1000>, - <0 0x17cb0000 0 0x1000>; + reg = <0x17ca0000 0x1000>, + <0x17cb0000 0x1000>; }; frame@17cc0000 { frame-number = <1>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; - reg = <0 0x17cc0000 0 0x1000>; + reg = <0x17cc0000 0x1000>; status = "disabled"; }; frame@17cd0000 { frame-number = <2>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; - reg = <0 0x17cd0000 0 0x1000>; + reg = <0x17cd0000 0x1000>; status = "disabled"; }; frame@17ce0000 { frame-number = <3>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - reg = <0 0x17ce0000 0 0x1000>; + reg = <0x17ce0000 0x1000>; status = "disabled"; }; frame@17cf0000 { frame-number = <4>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - reg = <0 0x17cf0000 0 0x1000>; + reg = <0x17cf0000 0x1000>; status = "disabled"; }; frame@17d00000 { frame-number = <5>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - reg = <0 0x17d00000 0 0x1000>; + reg = <0x17d00000 0x1000>; status = "disabled"; }; frame@17d10000 { frame-number = <6>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; - reg = <0 0x17d10000 0 0x1000>; + reg = <0x17d10000 0x1000>; status = "disabled"; }; }; diff --git a/dts/src/arm64/qcom/sdm850-lenovo-yoga-c630.dts b/dts/src/arm64/qcom/sdm850-lenovo-yoga-c630.dts index f1619b3f97..a7af1bed43 100644 --- a/dts/src/arm64/qcom/sdm850-lenovo-yoga-c630.dts +++ b/dts/src/arm64/qcom/sdm850-lenovo-yoga-c630.dts @@ -41,7 +41,7 @@ pinctrl-names = "default"; pinctrl-0 = <&lid_pin_active>, <&mode_pin_active>; - lid { + switch-lid { gpios = <&tlmm 124 GPIO_ACTIVE_HIGH>; linux,input-type = <EV_SW>; linux,code = <SW_LID>; @@ -49,7 +49,7 @@ wakeup-event-action = <EV_ACT_DEASSERTED>; }; - mode { + switch-mode { gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>; linux,input-type = <EV_SW>; linux,code = <SW_TABLET_MODE>; @@ -581,7 +581,7 @@ }; codec { - sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>; + sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>; }; }; @@ -611,7 +611,7 @@ }; codec { - sound-dai = <&wcd9340 2>; + sound-dai = <&wcd9340 2>; }; }; }; @@ -817,5 +817,5 @@ &crypto { /* FIXME: qce_start triggers an SError */ - status= "disable"; + status = "disable"; }; diff --git a/dts/src/arm64/qcom/sdm850-samsung-w737.dts b/dts/src/arm64/qcom/sdm850-samsung-w737.dts index 2a552d817b..b0315eeb13 100644 --- a/dts/src/arm64/qcom/sdm850-samsung-w737.dts +++ b/dts/src/arm64/qcom/sdm850-samsung-w737.dts @@ -509,7 +509,7 @@ }; codec { - sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>; + sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>; }; }; @@ -539,7 +539,7 @@ }; codec { - sound-dai = <&wcd9340 2>; + sound-dai = <&wcd9340 2>; }; }; }; diff --git a/dts/src/arm64/qcom/sdm850.dtsi b/dts/src/arm64/qcom/sdm850.dtsi index b1c2cf566c..da9f6fbe32 100644 --- a/dts/src/arm64/qcom/sdm850.dtsi +++ b/dts/src/arm64/qcom/sdm850.dtsi @@ -16,6 +16,5 @@ cpu4_opp34: opp-2956800000 { opp-hz = /bits/ 64 <2956800000>; opp-peak-kBps = <7216000 25497600>; - turbo-mode; }; }; diff --git a/dts/src/arm64/qcom/sm6125-sony-xperia-seine-pdx201.dts b/dts/src/arm64/qcom/sm6125-sony-xperia-seine-pdx201.dts index 871ccbba44..0aad2e94e7 100644 --- a/dts/src/arm64/qcom/sm6125-sony-xperia-seine-pdx201.dts +++ b/dts/src/arm64/qcom/sm6125-sony-xperia-seine-pdx201.dts @@ -42,11 +42,9 @@ gpio-keys { status = "okay"; compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; - vol-dn { + key-vol-dn { label = "Volume Down"; gpios = <&tlmm 47 GPIO_ACTIVE_LOW>; linux,input-type = <1>; @@ -88,11 +86,19 @@ status = "okay"; }; -&sdc2_state_off { +&sdc2_off_state { sd-cd { pins = "gpio98"; + drive-strength = <2>; bias-disable; + }; +}; + +&sdc2_on_state { + sd-cd { + pins = "gpio98"; drive-strength = <2>; + bias-pull-up; }; }; @@ -102,32 +108,6 @@ &tlmm { gpio-reserved-ranges = <22 2>, <28 6>; - - sdc2_state_on: sdc2-on { - clk { - pins = "sdc2_clk"; - bias-disable; - drive-strength = <16>; - }; - - cmd { - pins = "sdc2_cmd"; - bias-pull-up; - drive-strength = <10>; - }; - - data { - pins = "sdc2_data"; - bias-pull-up; - drive-strength = <10>; - }; - - sd-cd { - pins = "gpio98"; - bias-pull-up; - drive-strength = <2>; - }; - }; }; &usb3 { diff --git a/dts/src/arm64/qcom/sm6125.dtsi b/dts/src/arm64/qcom/sm6125.dtsi index 135e6e0da2..8c582a9e4a 100644 --- a/dts/src/arm64/qcom/sm6125.dtsi +++ b/dts/src/arm64/qcom/sm6125.dtsi @@ -386,23 +386,43 @@ interrupt-controller; #interrupt-cells = <2>; - sdc2_state_off: sdc2-off { + sdc2_off_state: sdc2-off-state { clk { pins = "sdc2_clk"; - bias-disable; drive-strength = <2>; + bias-disable; }; cmd { pins = "sdc2_cmd"; + drive-strength = <2>; bias-pull-up; + }; + + data { + pins = "sdc2_data"; drive-strength = <2>; + bias-pull-up; + }; + }; + + sdc2_on_state: sdc2-on-state { + clk { + pins = "sdc2_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd { + pins = "sdc2_cmd"; + drive-strength = <10>; + bias-pull-up; }; data { pins = "sdc2_data"; + drive-strength = <10>; bias-pull-up; - drive-strength = <2>; }; }; }; @@ -435,7 +455,7 @@ reg = <0x045f0000 0x7000>; }; - sdhc_1: sdhci@4744000 { + sdhc_1: mmc@4744000 { compatible = "qcom,sm6125-sdhci", "qcom,sdhci-msm-v5"; reg = <0x04744000 0x1000>, <0x04745000 0x1000>; reg-names = "hc", "core"; @@ -451,12 +471,15 @@ power-domains = <&rpmpd SM6125_VDDCX>; + qcom,dll-config = <0x000f642c>; + qcom,ddr-config = <0x80040873>; + bus-width = <8>; non-removable; status = "disabled"; }; - sdhc_2: sdhci@4784000 { + sdhc_2: mmc@4784000 { compatible = "qcom,sm6125-sdhci", "qcom,sdhci-msm-v5"; reg = <0x04784000 0x1000>; reg-names = "hc"; @@ -470,12 +493,15 @@ <&xo_board>; clock-names = "iface", "core", "xo"; - pinctrl-0 = <&sdc2_state_on>; - pinctrl-1 = <&sdc2_state_off>; + pinctrl-0 = <&sdc2_on_state>; + pinctrl-1 = <&sdc2_off_state>; pinctrl-names = "default", "sleep"; power-domains = <&rpmpd SM6125_VDDCX>; + qcom,dll-config = <0x0007642c>; + qcom,ddr-config = <0x80040873>; + bus-width = <4>; status = "disabled"; }; diff --git a/dts/src/arm64/qcom/sm6350.dtsi b/dts/src/arm64/qcom/sm6350.dtsi index d4f8f33f3f..d06aefdf3d 100644 --- a/dts/src/arm64/qcom/sm6350.dtsi +++ b/dts/src/arm64/qcom/sm6350.dtsi @@ -472,7 +472,7 @@ clock-names = "core"; }; - sdhc_1: sdhci@7c4000 { + sdhc_1: mmc@7c4000 { compatible = "qcom,sm6350-sdhci", "qcom,sdhci-msm-v5"; reg = <0 0x007c4000 0 0x1000>, <0 0x007c5000 0 0x1000>, @@ -489,7 +489,7 @@ clock-names = "iface", "core", "xo"; qcom,dll-config = <0x000f642c>; qcom,ddr-config = <0x80040868>; - power-domains = <&rpmhpd 0>; + power-domains = <&rpmhpd SM6350_CX>; operating-points-v2 = <&sdhc1_opp_table>; bus-width = <8>; non-removable; @@ -497,7 +497,7 @@ status = "disabled"; - sdhc1_opp_table: sdhc1-opp-table { + sdhc1_opp_table: opp-table { compatible = "operating-points-v2"; opp-19200000 { @@ -921,7 +921,7 @@ }; }; - sdhc_2: sdhci@8804000 { + sdhc_2: mmc@8804000 { compatible = "qcom,sm6350-sdhci", "qcom,sdhci-msm-v5"; reg = <0 0x08804000 0 0x1000>; @@ -935,13 +935,13 @@ clock-names = "iface", "core", "xo"; qcom,dll-config = <0x0007642c>; qcom,ddr-config = <0x80040868>; - power-domains = <&rpmhpd 0>; + power-domains = <&rpmhpd SM6350_CX>; operating-points-v2 = <&sdhc2_opp_table>; bus-width = <4>; status = "disabled"; - sdhc2_opp_table: sdhc2-opp-table { + sdhc2_opp_table: opp-table { compatible = "operating-points-v2"; opp-100000000 { @@ -1304,57 +1304,57 @@ compatible = "arm,armv7-timer-mem"; reg = <0x0 0x17c20000 0x0 0x1000>; clock-frequency = <19200000>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0x20000000>; frame@17c21000 { frame-number = <0>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c21000 0x0 0x1000>, - <0x0 0x17c22000 0x0 0x1000>; + reg = <0x17c21000 0x1000>, + <0x17c22000 0x1000>; }; frame@17c23000 { frame-number = <1>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c23000 0x0 0x1000>; + reg = <0x17c23000 0x1000>; status = "disabled"; }; frame@17c25000 { frame-number = <2>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c25000 0x0 0x1000>; + reg = <0x17c25000 0x1000>; status = "disabled"; }; frame@17c27000 { frame-number = <3>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c27000 0x0 0x1000>; + reg = <0x17c27000 0x1000>; status = "disabled"; }; frame@17c29000 { frame-number = <4>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c29000 0x0 0x1000>; + reg = <0x17c29000 0x1000>; status = "disabled"; }; frame@17c2b000 { frame-number = <5>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c2b000 0x0 0x1000>; + reg = <0x17c2b000 0x1000>; status = "disabled"; }; frame@17c2d000 { frame-number = <6>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c2d000 0x0 0x1000>; + reg = <0x17c2d000 0x1000>; status = "disabled"; }; }; diff --git a/dts/src/arm64/qcom/sm7225-fairphone-fp4.dts b/dts/src/arm64/qcom/sm7225-fairphone-fp4.dts index 61925216f5..c76abe7587 100644 --- a/dts/src/arm64/qcom/sm7225-fairphone-fp4.dts +++ b/dts/src/arm64/qcom/sm7225-fairphone-fp4.dts @@ -48,7 +48,7 @@ pinctrl-names = "default"; pinctrl-0 = <&gpio_keys_pin>; - volume-up { + key-volume-up { label = "volume_up"; linux,code = <KEY_VOLUMEUP>; gpios = <&pm6350_gpios 2 GPIO_ACTIVE_LOW>; @@ -339,7 +339,7 @@ }; &pm6350_gpios { - gpio_keys_pin: gpio-keys-pin { + gpio_keys_pin: gpio-keys-state { pins = "gpio2"; function = PMIC_GPIO_FUNC_NORMAL; bias-pull-up; diff --git a/dts/src/arm64/qcom/sm8150-hdk.dts b/dts/src/arm64/qcom/sm8150-hdk.dts index 37ddca0f02..3331ee957d 100644 --- a/dts/src/arm64/qcom/sm8150-hdk.dts +++ b/dts/src/arm64/qcom/sm8150-hdk.dts @@ -44,10 +44,10 @@ vin-supply = <&vph_pwr>; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - vol-up { + key-vol-up { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm64/qcom/sm8150-microsoft-surface-duo.dts b/dts/src/arm64/qcom/sm8150-microsoft-surface-duo.dts index a73317e1a8..bb278ecac3 100644 --- a/dts/src/arm64/qcom/sm8150-microsoft-surface-duo.dts +++ b/dts/src/arm64/qcom/sm8150-microsoft-surface-duo.dts @@ -49,10 +49,10 @@ vin-supply = <&vph_pwr>; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - vol_up { + key-vol-up { label = "Volume Up"; gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; diff --git a/dts/src/arm64/qcom/sm8150.dtsi b/dts/src/arm64/qcom/sm8150.dtsi index 8ea44c4b56..7d509ecd44 100644 --- a/dts/src/arm64/qcom/sm8150.dtsi +++ b/dts/src/arm64/qcom/sm8150.dtsi @@ -288,7 +288,7 @@ }; }; - cpu0_opp_table: cpu0_opp_table { + cpu0_opp_table: opp-table-cpu0 { compatible = "operating-points-v2"; opp-shared; @@ -383,7 +383,7 @@ }; }; - cpu4_opp_table: cpu4_opp_table { + cpu4_opp_table: opp-table-cpu4 { compatible = "operating-points-v2"; opp-shared; @@ -473,7 +473,7 @@ }; }; - cpu7_opp_table: cpu7_opp_table { + cpu7_opp_table: opp-table-cpu7 { compatible = "operating-points-v2"; opp-shared; @@ -2187,7 +2187,7 @@ }; gmu: gmu@2c6a000 { - compatible="qcom,adreno-gmu-640.1", "qcom,adreno-gmu"; + compatible = "qcom,adreno-gmu-640.1", "qcom,adreno-gmu"; reg = <0 0x02c6a000 0 0x30000>, <0 0x0b290000 0 0x10000>, @@ -3543,7 +3543,7 @@ }; }; - sdhc_2: sdhci@8804000 { + sdhc_2: mmc@8804000 { compatible = "qcom,sm8150-sdhci", "qcom,sdhci-msm-v5"; reg = <0 0x08804000 0 0x1000>; @@ -3563,7 +3563,7 @@ status = "disabled"; - sdhc2_opp_table: sdhc2-opp-table { + sdhc2_opp_table: opp-table { compatible = "operating-points-v2"; opp-19200000 { @@ -3718,7 +3718,7 @@ }; aoss_qmp: power-controller@c300000 { - compatible = "qcom,sm8150-aoss-qmp"; + compatible = "qcom,sm8150-aoss-qmp", "qcom,aoss-qmp"; reg = <0x0 0x0c300000 0x0 0x400>; interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>; mboxes = <&apss_shared 0>; @@ -3944,9 +3944,9 @@ }; timer@17c20000 { - #address-cells = <2>; - #size-cells = <2>; - ranges; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0x20000000>; compatible = "arm,armv7-timer-mem"; reg = <0x0 0x17c20000 0x0 0x1000>; clock-frequency = <19200000>; @@ -3955,49 +3955,49 @@ frame-number = <0>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c21000 0x0 0x1000>, - <0x0 0x17c22000 0x0 0x1000>; + reg = <0x17c21000 0x1000>, + <0x17c22000 0x1000>; }; frame@17c23000 { frame-number = <1>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c23000 0x0 0x1000>; + reg = <0x17c23000 0x1000>; status = "disabled"; }; frame@17c25000 { frame-number = <2>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c25000 0x0 0x1000>; + reg = <0x17c25000 0x1000>; status = "disabled"; }; frame@17c27000 { frame-number = <3>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c26000 0x0 0x1000>; + reg = <0x17c26000 0x1000>; status = "disabled"; }; frame@17c29000 { frame-number = <4>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c29000 0x0 0x1000>; + reg = <0x17c29000 0x1000>; status = "disabled"; }; frame@17c2b000 { frame-number = <5>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c2b000 0x0 0x1000>; + reg = <0x17c2b000 0x1000>; status = "disabled"; }; frame@17c2d000 { frame-number = <6>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c2d000 0x0 0x1000>; + reg = <0x17c2d000 0x1000>; status = "disabled"; }; }; diff --git a/dts/src/arm64/qcom/sm8250-hdk.dts b/dts/src/arm64/qcom/sm8250-hdk.dts index 3b08247206..632e98193d 100644 --- a/dts/src/arm64/qcom/sm8250-hdk.dts +++ b/dts/src/arm64/qcom/sm8250-hdk.dts @@ -53,10 +53,10 @@ vin-supply = <&vph_pwr>; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - vol-up { + key-vol-up { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm64/qcom/sm8250-sony-xperia-edo.dtsi b/dts/src/arm64/qcom/sm8250-sony-xperia-edo.dtsi index e819b5b773..549e0a2aa9 100644 --- a/dts/src/arm64/qcom/sm8250-sony-xperia-edo.dtsi +++ b/dts/src/arm64/qcom/sm8250-sony-xperia-edo.dtsi @@ -57,7 +57,7 @@ * case, they are both on &pm8150b_gpios: camera focus(2), camera snapshot(1). */ - vol-down { + key-vol-down { label = "Volume Down"; linux,code = <KEY_VOLUMEDOWN>; gpios = <&pm8150_gpios 1 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm64/qcom/sm8250.dtsi b/dts/src/arm64/qcom/sm8250.dtsi index cf0c97bd5a..bc773e2100 100644 --- a/dts/src/arm64/qcom/sm8250.dtsi +++ b/dts/src/arm64/qcom/sm8250.dtsi @@ -8,6 +8,8 @@ #include <dt-bindings/clock/qcom,gcc-sm8250.h> #include <dt-bindings/clock/qcom,gpucc-sm8250.h> #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,sm8250-lpass-aoncc.h> +#include <dt-bindings/clock/qcom,sm8250-lpass-audiocc.h> #include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interconnect/qcom,osm-l3.h> @@ -336,7 +338,7 @@ }; }; - cpu0_opp_table: cpu0_opp_table { + cpu0_opp_table: opp-table-cpu0 { compatible = "operating-points-v2"; opp-shared; @@ -426,7 +428,7 @@ }; }; - cpu4_opp_table: cpu4_opp_table { + cpu4_opp_table: opp-table-cpu4 { compatible = "operating-points-v2"; opp-shared; @@ -521,7 +523,7 @@ }; }; - cpu7_opp_table: cpu7_opp_table { + cpu7_opp_table: opp-table-cpu7 { compatible = "operating-points-v2"; opp-shared; @@ -628,7 +630,7 @@ firmware { scm: scm { - compatible = "qcom,scm"; + compatible = "qcom,scm-sm8250", "qcom,scm"; #reset-cells = <1>; }; }; @@ -702,6 +704,25 @@ }; }; + qup_opp_table: opp-table-qup { + compatible = "operating-points-v2"; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-120000000 { + opp-hz = /bits/ 64 <120000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + }; + reserved-memory { #address-cells = <2>; #size-cells = <2>; @@ -914,25 +935,6 @@ clock-names = "core"; }; - qup_opp_table: qup-opp-table { - compatible = "operating-points-v2"; - - opp-50000000 { - opp-hz = /bits/ 64 <50000000>; - required-opps = <&rpmhpd_opp_min_svs>; - }; - - opp-75000000 { - opp-hz = /bits/ 64 <75000000>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-120000000 { - opp-hz = /bits/ 64 <120000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - }; - gpi_dma2: dma-controller@800000 { compatible = "qcom,sm8250-gpi-dma"; reg = <0 0x00800000 0 0x70000>; @@ -1884,6 +1886,8 @@ clock-names = "pipe0"; #phy-cells = <0>; + + #clock-cells = <0>; clock-output-names = "pcie_0_pipe_clk"; }; }; @@ -1990,6 +1994,8 @@ clock-names = "pipe0"; #phy-cells = <0>; + + #clock-cells = <0>; clock-output-names = "pcie_1_pipe_clk"; }; }; @@ -2096,6 +2102,8 @@ clock-names = "pipe0"; #phy-cells = <0>; + + #clock-cells = <0>; clock-output-names = "pcie_2_pipe_clk"; }; }; @@ -2188,11 +2196,11 @@ wsamacro: codec@3240000 { compatible = "qcom,sm8250-lpass-wsa-macro"; reg = <0 0x03240000 0 0x1000>; - clocks = <&audiocc 1>, - <&audiocc 0>, + clocks = <&audiocc LPASS_CDC_WSA_MCLK>, + <&audiocc LPASS_CDC_WSA_NPL>, <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, - <&aoncc 0>, + <&aoncc LPASS_CDC_VA_MCLK>, <&vamacro>; clock-names = "mclk", "npl", "macro", "dcodec", "va", "fsgen"; @@ -2239,7 +2247,7 @@ vamacro: codec@3370000 { compatible = "qcom,sm8250-lpass-va-macro"; reg = <0 0x03370000 0 0x1000>; - clocks = <&aoncc 0>, + clocks = <&aoncc LPASS_CDC_VA_MCLK>, <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; @@ -2569,7 +2577,7 @@ }; gmu: gmu@3d6a000 { - compatible="qcom,adreno-gmu-650.2", "qcom,adreno-gmu"; + compatible = "qcom,adreno-gmu-650.2", "qcom,adreno-gmu"; reg = <0 0x03d6a000 0 0x30000>, <0 0x3de0000 0 0x10000>, @@ -2623,7 +2631,7 @@ }; adreno_smmu: iommu@3da0000 { - compatible = "qcom,sm8250-smmu-500", "arm,mmu-500"; + compatible = "qcom,sm8250-smmu-500", "qcom,adreno-smmu", "arm,mmu-500"; reg = <0 0x03da0000 0 0x10000>; #iommu-cells = <2>; #global-interrupts = <2>; @@ -2917,7 +2925,7 @@ }; }; - sdhc_2: sdhci@8804000 { + sdhc_2: mmc@8804000 { compatible = "qcom,sm8250-sdhci", "qcom,sdhci-msm-v5"; reg = <0 0x08804000 0 0x1000>; @@ -2937,7 +2945,7 @@ status = "disabled"; - sdhc2_opp_table: sdhc2-opp-table { + sdhc2_opp_table: opp-table { compatible = "operating-points-v2"; opp-19200000 { @@ -3010,11 +3018,13 @@ assigned-clock-rates = <19200000>, <200000000>; interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 14 IRQ_TYPE_EDGE_BOTH>, + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>, <&pdc 15 IRQ_TYPE_EDGE_BOTH>, - <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hs_phy_irq", "dp_hs_phy_irq", - "dm_hs_phy_irq", "ss_phy_irq"; + <&pdc 14 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "hs_phy_irq", + "ss_phy_irq", + "dm_hs_phy_irq", + "dp_hs_phy_irq"; power-domains = <&gcc USB30_PRIM_GDSC>; @@ -3065,11 +3075,13 @@ assigned-clock-rates = <19200000>, <200000000>; interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 12 IRQ_TYPE_EDGE_BOTH>, + <&pdc 16 IRQ_TYPE_LEVEL_HIGH>, <&pdc 13 IRQ_TYPE_EDGE_BOTH>, - <&pdc 16 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hs_phy_irq", "dp_hs_phy_irq", - "dm_hs_phy_irq", "ss_phy_irq"; + <&pdc 12 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "hs_phy_irq", + "ss_phy_irq", + "dm_hs_phy_irq", + "dp_hs_phy_irq"; power-domains = <&gcc USB30_SEC_GDSC>; @@ -3123,7 +3135,7 @@ compatible = "venus-encoder"; }; - venus_opp_table: venus-opp-table { + venus_opp_table: opp-table { compatible = "operating-points-v2"; opp-720000000 { @@ -3407,6 +3419,7 @@ clock-names = "iface", "bi_tcxo", "bi_tcxo_ao", "sleep_clk"; power-domains = <&rpmhpd SM8250_MMCX>; required-opps = <&rpmhpd_opp_low_svs>; + status = "disabled"; #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; @@ -3429,9 +3442,6 @@ <&dispcc DISP_CC_MDSS_MDP_CLK>; clock-names = "iface", "bus", "nrt_bus", "core"; - assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>; - assigned-clock-rates = <460000000>; - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <1>; @@ -3444,7 +3454,7 @@ #size-cells = <2>; ranges; - mdss_mdp: mdp@ae01000 { + mdss_mdp: display-controller@ae01000 { compatible = "qcom,sm8250-dpu"; reg = <0 0x0ae01000 0 0x8f000>, <0 0x0aeb0000 0 0x2008>; @@ -3456,10 +3466,8 @@ <&dispcc DISP_CC_MDSS_VSYNC_CLK>; clock-names = "iface", "bus", "core", "vsync"; - assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>, - <&dispcc DISP_CC_MDSS_VSYNC_CLK>; - assigned-clock-rates = <460000000>, - <19200000>; + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; operating-points-v2 = <&mdp_opp_table>; power-domains = <&rpmhpd SM8250_MMCX>; @@ -3486,7 +3494,7 @@ }; }; - mdp_opp_table: mdp-opp-table { + mdp_opp_table: opp-table { compatible = "operating-points-v2"; opp-200000000 { @@ -3656,7 +3664,7 @@ status = "disabled"; - dsi_opp_table: dsi-opp-table { + dsi_opp_table: opp-table { compatible = "operating-points-v2"; opp-187500000 { @@ -3734,7 +3742,7 @@ }; aoss_qmp: power-controller@c300000 { - compatible = "qcom,sm8250-aoss-qmp"; + compatible = "qcom,sm8250-aoss-qmp", "qcom,aoss-qmp"; reg = <0 0x0c300000 0 0x400>; interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP @@ -4867,9 +4875,9 @@ }; timer@17c20000 { - #address-cells = <2>; - #size-cells = <2>; - ranges; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0x20000000>; compatible = "arm,armv7-timer-mem"; reg = <0x0 0x17c20000 0x0 0x1000>; clock-frequency = <19200000>; @@ -4878,49 +4886,49 @@ frame-number = <0>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c21000 0x0 0x1000>, - <0x0 0x17c22000 0x0 0x1000>; + reg = <0x17c21000 0x1000>, + <0x17c22000 0x1000>; }; frame@17c23000 { frame-number = <1>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c23000 0x0 0x1000>; + reg = <0x17c23000 0x1000>; status = "disabled"; }; frame@17c25000 { frame-number = <2>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c25000 0x0 0x1000>; + reg = <0x17c25000 0x1000>; status = "disabled"; }; frame@17c27000 { frame-number = <3>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c27000 0x0 0x1000>; + reg = <0x17c27000 0x1000>; status = "disabled"; }; frame@17c29000 { frame-number = <4>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c29000 0x0 0x1000>; + reg = <0x17c29000 0x1000>; status = "disabled"; }; frame@17c2b000 { frame-number = <5>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c2b000 0x0 0x1000>; + reg = <0x17c2b000 0x1000>; status = "disabled"; }; frame@17c2d000 { frame-number = <6>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c2d000 0x0 0x1000>; + reg = <0x17c2d000 0x1000>; status = "disabled"; }; }; diff --git a/dts/src/arm64/qcom/sm8350-microsoft-surface-duo2.dts b/dts/src/arm64/qcom/sm8350-microsoft-surface-duo2.dts index 9a6faa9393..9c4cfd995f 100644 --- a/dts/src/arm64/qcom/sm8350-microsoft-surface-duo2.dts +++ b/dts/src/arm64/qcom/sm8350-microsoft-surface-duo2.dts @@ -336,9 +336,7 @@ status = "okay"; vdda-phy-supply = <&vreg_l5b_0p88>; - vdda-max-microamp = <91600>; vdda-pll-supply = <&vreg_l6b_1p2>; - vdda-pll-max-microamp = <19000>; }; &usb_1 { diff --git a/dts/src/arm64/qcom/sm8350-sony-xperia-sagami.dtsi b/dts/src/arm64/qcom/sm8350-sony-xperia-sagami.dtsi index 90b13cbe2f..cb9bbd234b 100644 --- a/dts/src/arm64/qcom/sm8350-sony-xperia-sagami.dtsi +++ b/dts/src/arm64/qcom/sm8350-sony-xperia-sagami.dtsi @@ -49,7 +49,7 @@ /* For reasons still unknown, GAssist key and Camera Focus/Shutter don't work.. */ - vol-down { + key-vol-down { label = "Volume Down"; linux,code = <KEY_VOLUMEDOWN>; gpios = <&pmk8350_gpios 3 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm64/qcom/sm8350.dtsi b/dts/src/arm64/qcom/sm8350.dtsi index 743cba9b68..e72a044118 100644 --- a/dts/src/arm64/qcom/sm8350.dtsi +++ b/dts/src/arm64/qcom/sm8350.dtsi @@ -4,6 +4,7 @@ */ #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,dispcc-sm8350.h> #include <dt-bindings/clock/qcom,gcc-sm8350.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/dma/qcom-gpi.h> @@ -341,6 +342,44 @@ }; }; + qup_opp_table_100mhz: opp-table-qup100mhz { + compatible = "operating-points-v2"; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + }; + + qup_opp_table_120mhz: opp-table-qup120mhz { + compatible = "operating-points-v2"; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-120000000 { + opp-hz = /bits/ 64 <120000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + }; + reserved_memory: reserved-memory { #address-cells = <2>; #size-cells = <2>; @@ -638,44 +677,6 @@ #mbox-cells = <2>; }; - qup_opp_table_100mhz: qup-100mhz-opp-table { - compatible = "operating-points-v2"; - - opp-50000000 { - opp-hz = /bits/ 64 <50000000>; - required-opps = <&rpmhpd_opp_min_svs>; - }; - - opp-75000000 { - opp-hz = /bits/ 64 <75000000>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - }; - - qup_opp_table_120mhz: qup-120mhz-opp-table { - compatible = "operating-points-v2"; - - opp-50000000 { - opp-hz = /bits/ 64 <50000000>; - required-opps = <&rpmhpd_opp_min_svs>; - }; - - opp-75000000 { - opp-hz = /bits/ 64 <75000000>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-120000000 { - opp-hz = /bits/ 64 <120000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - }; - gpi_dma2: dma-controller@800000 { compatible = "qcom,sm8350-gpi-dma"; reg = <0 0x00800000 0 0x60000>; @@ -1656,8 +1657,8 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&rpmhpd 0>, - <&rpmhpd 12>; + power-domains = <&rpmhpd SM8350_CX>, + <&rpmhpd SM8350_MSS>; power-domain-names = "cx", "mss"; interconnects = <&mc_virt MASTER_LLCC &mc_virt SLAVE_EBI1>; @@ -1677,7 +1678,6 @@ IRQ_TYPE_EDGE_RISING>; mboxes = <&ipcc IPCC_CLIENT_MPSS IPCC_MPROC_SIGNAL_GLINK_QMP>; - interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>; label = "modem"; qcom,remote-pid = <1>; }; @@ -1718,7 +1718,7 @@ }; aoss_qmp: power-controller@c300000 { - compatible = "qcom,sm8350-aoss-qmp"; + compatible = "qcom,sm8350-aoss-qmp", "qcom,aoss-qmp"; reg = <0 0x0c300000 0 0x400>; interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP IRQ_TYPE_EDGE_RISING>; @@ -1933,9 +1933,9 @@ timer@17c20000 { compatible = "arm,armv7-timer-mem"; - #address-cells = <2>; - #size-cells = <2>; - ranges; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0x20000000>; reg = <0x0 0x17c20000 0x0 0x1000>; clock-frequency = <19200000>; @@ -1943,49 +1943,49 @@ frame-number = <0>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c21000 0x0 0x1000>, - <0x0 0x17c22000 0x0 0x1000>; + reg = <0x17c21000 0x1000>, + <0x17c22000 0x1000>; }; frame@17c23000 { frame-number = <1>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c23000 0x0 0x1000>; + reg = <0x17c23000 0x1000>; status = "disabled"; }; frame@17c25000 { frame-number = <2>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c25000 0x0 0x1000>; + reg = <0x17c25000 0x1000>; status = "disabled"; }; frame@17c27000 { frame-number = <3>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c27000 0x0 0x1000>; + reg = <0x17c27000 0x1000>; status = "disabled"; }; frame@17c29000 { frame-number = <4>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c29000 0x0 0x1000>; + reg = <0x17c29000 0x1000>; status = "disabled"; }; frame@17c2b000 { frame-number = <5>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c2b000 0x0 0x1000>; + reg = <0x17c2b000 0x1000>; status = "disabled"; }; frame@17c2d000 { frame-number = <6>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c2d000 0x0 0x1000>; + reg = <0x17c2d000 0x1000>; status = "disabled"; }; }; @@ -2148,7 +2148,6 @@ <0 0x01d87800 0 0x108>, <0 0x01d87a00 0 0x1e0>; #phy-cells = <0>; - #clock-cells = <0>; }; }; @@ -2167,8 +2166,8 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&rpmhpd 4>, - <&rpmhpd 5>; + power-domains = <&rpmhpd SM8350_LCX>, + <&rpmhpd SM8350_LMX>; power-domain-names = "lcx", "lmx"; memory-region = <&pil_slpi_mem>; @@ -2235,8 +2234,8 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&rpmhpd 0>, - <&rpmhpd 10>; + power-domains = <&rpmhpd SM8350_CX>, + <&rpmhpd SM8350_MXC>; power-domain-names = "cx", "mxc"; interconnects = <&compute_noc MASTER_CDSP_PROC &mc_virt SLAVE_EBI1>; @@ -2381,7 +2380,7 @@ <0 0x088e9800 0 0x200>, <0 0x088e9a00 0 0x100>; #phy-cells = <0>; - #clock-cells = <1>; + #clock-cells = <0>; clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; clock-names = "pipe0"; clock-output-names = "usb3_phy_pipe_clk_src"; @@ -2411,7 +2410,7 @@ <0 0x088ec000 0 0x200>, <0 0x088eb200 0 0x1100>; #phy-cells = <0>; - #clock-cells = <1>; + #clock-cells = <0>; clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; clock-names = "pipe0"; clock-output-names = "usb3_uni_phy_pipe_clk_src"; @@ -2462,11 +2461,13 @@ assigned-clock-rates = <19200000>, <200000000>; interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 14 IRQ_TYPE_EDGE_BOTH>, + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>, <&pdc 15 IRQ_TYPE_EDGE_BOTH>, - <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hs_phy_irq", "dp_hs_phy_irq", - "dm_hs_phy_irq", "ss_phy_irq"; + <&pdc 14 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "hs_phy_irq", + "ss_phy_irq", + "dm_hs_phy_irq", + "dp_hs_phy_irq"; power-domains = <&gcc USB30_PRIM_GDSC>; @@ -2510,11 +2511,13 @@ assigned-clock-rates = <19200000>, <200000000>; interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 12 IRQ_TYPE_EDGE_BOTH>, + <&pdc 16 IRQ_TYPE_LEVEL_HIGH>, <&pdc 13 IRQ_TYPE_EDGE_BOTH>, - <&pdc 16 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hs_phy_irq", "dp_hs_phy_irq", - "dm_hs_phy_irq", "ss_phy_irq"; + <&pdc 12 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "hs_phy_irq", + "ss_phy_irq", + "dm_hs_phy_irq", + "dp_hs_phy_irq"; power-domains = <&gcc USB30_SEC_GDSC>; @@ -2532,6 +2535,31 @@ }; }; + dispcc: clock-controller@af00000 { + compatible = "qcom,sm8350-dispcc"; + reg = <0 0x0af00000 0 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>; + clock-names = "bi_tcxo", + "dsi0_phy_pll_out_byteclk", + "dsi0_phy_pll_out_dsiclk", + "dsi1_phy_pll_out_byteclk", + "dsi1_phy_pll_out_dsiclk", + "dp_phy_pll_link_clk", + "dp_phy_pll_vco_div_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + + power-domains = <&rpmhpd SM8350_MMCX>; + power-domain-names = "mmcx"; + }; + adsp: remoteproc@17300000 { compatible = "qcom,sm8350-adsp-pas"; reg = <0 0x17300000 0 0x100>; @@ -2547,8 +2575,8 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&rpmhpd 4>, - <&rpmhpd 5>; + power-domains = <&rpmhpd SM8350_LCX>, + <&rpmhpd SM8350_LMX>; power-domain-names = "lcx", "lmx"; memory-region = <&pil_adsp_mem>; diff --git a/dts/src/arm64/qcom/sm8450-hdk.dts b/dts/src/arm64/qcom/sm8450-hdk.dts index 4e51a9d6af..38ccd44620 100644 --- a/dts/src/arm64/qcom/sm8450-hdk.dts +++ b/dts/src/arm64/qcom/sm8450-hdk.dts @@ -418,8 +418,6 @@ vdda-phy-supply = <&vreg_l5b_0p88>; vdda-pll-supply = <&vreg_l6b_1p2>; - vdda-max-microamp = <173000>; - vdda-pll-max-microamp = <24900>; }; &usb_1 { diff --git a/dts/src/arm64/qcom/sm8450-qrd.dts b/dts/src/arm64/qcom/sm8450-qrd.dts index 236e53974f..e58fc73997 100644 --- a/dts/src/arm64/qcom/sm8450-qrd.dts +++ b/dts/src/arm64/qcom/sm8450-qrd.dts @@ -424,8 +424,6 @@ vdda-phy-supply = <&vreg_l5b_0p88>; vdda-pll-supply = <&vreg_l6b_1p2>; - vdda-max-microamp = <173000>; - vdda-pll-max-microamp = <24900>; }; &usb_1 { diff --git a/dts/src/arm64/qcom/sm8450.dtsi b/dts/src/arm64/qcom/sm8450.dtsi index b87756bf1c..4978c5ba5d 100644 --- a/dts/src/arm64/qcom/sm8450.dtsi +++ b/dts/src/arm64/qcom/sm8450.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-sm8450.h> #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,sm8450-camcc.h> #include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/mailbox/qcom-ipcc.h> @@ -258,17 +259,18 @@ firmware { scm: scm { compatible = "qcom,scm-sm8450", "qcom,scm"; + interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>; #reset-cells = <1>; }; }; - clk_virt: interconnect@0 { + clk_virt: interconnect-0 { compatible = "qcom,sm8450-clk-virt"; #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; - mc_virt: interconnect@1 { + mc_virt: interconnect-1 { compatible = "qcom,sm8450-mc-virt"; #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; @@ -343,7 +345,7 @@ }; }; - qup_opp_table_100mhz: qup-100mhz-opp-table { + qup_opp_table_100mhz: opp-table-qup { compatible = "operating-points-v2"; opp-50000000 { @@ -976,6 +978,19 @@ status = "disabled"; }; + uart20: serial@894000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00894000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart20_default>; + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + spi20: spi@894000 { compatible = "qcom,geni-spi"; reg = <0 0x00894000 0 0x4000>; @@ -2001,7 +2016,7 @@ <0 0x088e9800 0 0x200>, <0 0x088e9a00 0 0x100>; #phy-cells = <0>; - #clock-cells = <1>; + #clock-cells = <0>; clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; clock-names = "pipe0"; clock-output-names = "usb3_phy_pipe_clk_src"; @@ -2012,7 +2027,7 @@ compatible = "qcom,sm8450-slpi-pas"; reg = <0 0x02400000 0 0x4000>; - interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&pdc 9 IRQ_TYPE_EDGE_RISING>, <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>, <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>, <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>, @@ -2079,7 +2094,7 @@ compatible = "qcom,sm8450-adsp-pas"; reg = <0 0x030000000 0 0x100>; - interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, @@ -2145,7 +2160,7 @@ compatible = "qcom,sm8450-cdsp-pas"; reg = <0 0x032300000 0 0x1400000>; - interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>, @@ -2251,7 +2266,7 @@ compatible = "qcom,sm8450-mpss-pas"; reg = <0x0 0x04080000 0x0 0x4040>; - interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>, <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>, <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>, <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>, @@ -2282,12 +2297,26 @@ IRQ_TYPE_EDGE_RISING>; mboxes = <&ipcc IPCC_CLIENT_MPSS IPCC_MPROC_SIGNAL_GLINK_QMP>; - interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>; label = "modem"; qcom,remote-pid = <1>; }; }; + camcc: clock-controller@ade0000 { + compatible = "qcom,sm8450-camcc"; + reg = <0 0x0ade0000 0 0x20000>; + clocks = <&gcc GCC_CAMERA_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>; + power-domains = <&rpmhpd SM8450_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + status = "disabled"; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,sm8450-pdc", "qcom,pdc"; reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>; @@ -2738,6 +2767,12 @@ drive-strength = <2>; bias-disable; }; + + qup_uart20_default: qup-uart20-default { + pins = "gpio76", "gpio77", "gpio78", "gpio79"; + function = "qup20"; + }; + }; apps_smmu: iommu@15000000 { @@ -2867,9 +2902,9 @@ timer@17420000 { compatible = "arm,armv7-timer-mem"; - #address-cells = <2>; - #size-cells = <2>; - ranges; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0x20000000>; reg = <0x0 0x17420000 0x0 0x1000>; clock-frequency = <19200000>; @@ -2877,49 +2912,49 @@ frame-number = <0>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17421000 0x0 0x1000>, - <0x0 0x17422000 0x0 0x1000>; + reg = <0x17421000 0x1000>, + <0x17422000 0x1000>; }; frame@17423000 { frame-number = <1>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17423000 0x0 0x1000>; + reg = <0x17423000 0x1000>; status = "disabled"; }; frame@17425000 { frame-number = <2>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17425000 0x0 0x1000>; + reg = <0x17425000 0x1000>; status = "disabled"; }; frame@17427000 { frame-number = <3>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17427000 0x0 0x1000>; + reg = <0x17427000 0x1000>; status = "disabled"; }; frame@17429000 { frame-number = <4>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17429000 0x0 0x1000>; + reg = <0x17429000 0x1000>; status = "disabled"; }; frame@1742b000 { frame-number = <5>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x1742b000 0x0 0x1000>; + reg = <0x1742b000 0x1000>; status = "disabled"; }; frame@1742d000 { frame-number = <6>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x1742d000 0x0 0x1000>; + reg = <0x1742d000 0x1000>; status = "disabled"; }; }; @@ -3102,7 +3137,6 @@ <0 0x01d87800 0 0x108>, <0 0x01d87a00 0 0x1e0>; #phy-cells = <0>; - #clock-cells = <0>; }; }; diff --git a/dts/src/arm64/renesas/beacon-renesom-baseboard.dtsi b/dts/src/arm64/renesas/beacon-renesom-baseboard.dtsi index 142e7ffbd2..63e7a39e10 100644 --- a/dts/src/arm64/renesas/beacon-renesom-baseboard.dtsi +++ b/dts/src/arm64/renesas/beacon-renesom-baseboard.dtsi @@ -146,7 +146,7 @@ }; }; - reg_audio: regulator_audio { + reg_audio: regulator-audio { compatible = "regulator-fixed"; regulator-name = "audio-1.8V"; regulator-min-microvolt = <1800000>; @@ -174,7 +174,7 @@ vin-supply = <®_lcd>; }; - reg_cam0: regulator_camera { + reg_cam0: regulator-cam0 { compatible = "regulator-fixed"; regulator-name = "reg_cam0"; regulator-min-microvolt = <1800000>; @@ -183,7 +183,7 @@ enable-active-high; }; - reg_cam1: regulator_camera { + reg_cam1: regulator-cam1 { compatible = "regulator-fixed"; regulator-name = "reg_cam1"; regulator-min-microvolt = <1800000>; diff --git a/dts/src/arm64/renesas/beacon-renesom-som.dtsi b/dts/src/arm64/renesas/beacon-renesom-som.dtsi index 877d076ffc..f5c1d74b73 100644 --- a/dts/src/arm64/renesas/beacon-renesom-som.dtsi +++ b/dts/src/arm64/renesas/beacon-renesom-som.dtsi @@ -20,7 +20,7 @@ clock-output-names = "osc_32k"; }; - reg_1p8v: regulator0 { + reg_1p8v: regulator-1p8v { compatible = "regulator-fixed"; regulator-name = "fixed-1.8V"; regulator-min-microvolt = <1800000>; @@ -29,7 +29,7 @@ regulator-always-on; }; - reg_3p3v: regulator1 { + reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V"; regulator-min-microvolt = <3300000>; diff --git a/dts/src/arm64/renesas/draak-ebisu-panel-aa104xd12.dts b/dts/src/arm64/renesas/draak-ebisu-panel-aa104xd12.dts new file mode 100644 index 0000000000..258f8668ca --- /dev/null +++ b/dts/src/arm64/renesas/draak-ebisu-panel-aa104xd12.dts @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree overlay for the AA104XD12 panel connected to LVDS1 on a Draak or + * Ebisu board + * + * Copyright 2021 Ideas on Board Oy + */ + +/dts-v1/; +/plugin/; + +&{/} { +#include "panel-aa104xd12.dtsi" +}; + +&{/panel} { + backlight = <&backlight>; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds1_out>; + }; + }; +}; + +&lvds1 { + status = "okay"; + + ports { + port@1 { + lvds1_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; +}; diff --git a/dts/src/arm64/renesas/draak.dtsi b/dts/src/arm64/renesas/draak.dtsi index 7231f820d6..ef3bb835d5 100644 --- a/dts/src/arm64/renesas/draak.dtsi +++ b/dts/src/arm64/renesas/draak.dtsi @@ -630,7 +630,7 @@ bitclock-master = <&rsnd_for_ak4613>; frame-master = <&rsnd_for_ak4613>; playback = <&ssi3>, <&src5>, <&dvc0>; - capture = <&ssi4>, <&src6>, <&dvc1>; + capture = <&ssi4>, <&src6>, <&dvc1>; }; }; }; diff --git a/dts/src/arm64/renesas/ebisu.dtsi b/dts/src/arm64/renesas/ebisu.dtsi index 72f359efa2..8fc03491a1 100644 --- a/dts/src/arm64/renesas/ebisu.dtsi +++ b/dts/src/arm64/renesas/ebisu.dtsi @@ -145,7 +145,7 @@ reg = <0x0 0x48000000 0x0 0x38000000>; }; - reg_1p8v: regulator0 { + reg_1p8v: regulator-1p8v { compatible = "regulator-fixed"; regulator-name = "fixed-1.8V"; regulator-min-microvolt = <1800000>; @@ -154,7 +154,7 @@ regulator-always-on; }; - reg_3p3v: regulator1 { + reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V"; regulator-min-microvolt = <3300000>; @@ -163,7 +163,7 @@ regulator-always-on; }; - reg_12p0v: regulator2 { + reg_12p0v: regulator-12p0v { compatible = "regulator-fixed"; regulator-name = "D12.0V"; regulator-min-microvolt = <12000000>; @@ -711,7 +711,7 @@ rcar_sound,dai { dai0 { playback = <&ssi0>, <&src0>, <&dvc0>; - capture = <&ssi1>, <&src1>, <&dvc1>; + capture = <&ssi1>, <&src1>, <&dvc1>; }; }; diff --git a/dts/src/arm64/renesas/hihope-common.dtsi b/dts/src/arm64/renesas/hihope-common.dtsi index 935d06515a..b062f41ee2 100644 --- a/dts/src/arm64/renesas/hihope-common.dtsi +++ b/dts/src/arm64/renesas/hihope-common.dtsi @@ -53,7 +53,7 @@ }; }; - reg_1p8v: regulator0 { + reg_1p8v: regulator-1p8v { compatible = "regulator-fixed"; regulator-name = "fixed-1.8V"; regulator-min-microvolt = <1800000>; @@ -62,7 +62,7 @@ regulator-always-on; }; - reg_3p3v: regulator1 { + reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V"; regulator-min-microvolt = <3300000>; diff --git a/dts/src/arm64/renesas/panel-aa104xd12.dtsi b/dts/src/arm64/renesas/panel-aa104xd12.dtsi new file mode 100644 index 0000000000..4b1f0982b9 --- /dev/null +++ b/dts/src/arm64/renesas/panel-aa104xd12.dtsi @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Common file for the AA104XD12 panel connected to Renesas R-Car Gen3 boards. + * + * Copyright (C) 2014 Renesas Electronics Corp. + */ + +panel { + compatible = "mitsubishi,aa104xd12", "panel-lvds"; + + width-mm = <210>; + height-mm = <158>; + data-mapping = "jeida-18"; + + panel-timing { + /* 1024x768 @65Hz */ + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hsync-len = <136>; + hfront-porch = <20>; + hback-porch = <160>; + vfront-porch = <3>; + vback-porch = <29>; + vsync-len = <6>; + }; + + port { + }; +}; diff --git a/dts/src/arm64/renesas/r8a774c0.dtsi b/dts/src/arm64/renesas/r8a774c0.dtsi index b6aeb22e88..c563d26a7a 100644 --- a/dts/src/arm64/renesas/r8a774c0.dtsi +++ b/dts/src/arm64/renesas/r8a774c0.dtsi @@ -1281,7 +1281,7 @@ vin4csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin4>; + remote-endpoint = <&csi40vin4>; }; }; }; @@ -1309,7 +1309,7 @@ vin5csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin5>; + remote-endpoint = <&csi40vin5>; }; }; }; @@ -1952,7 +1952,7 @@ cpu-thermal { polling-delay-passive = <250>; polling-delay = <0>; - thermal-sensors = <&thermal 0>; + thermal-sensors = <&thermal>; sustainable-power = <717>; cooling-maps { diff --git a/dts/src/arm64/renesas/r8a77990.dtsi b/dts/src/arm64/renesas/r8a77990.dtsi index d330212026..565e9d8594 100644 --- a/dts/src/arm64/renesas/r8a77990.dtsi +++ b/dts/src/arm64/renesas/r8a77990.dtsi @@ -1324,7 +1324,7 @@ vin4csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin4>; + remote-endpoint = <&csi40vin4>; }; }; }; @@ -1352,7 +1352,7 @@ vin5csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin5>; + remote-endpoint = <&csi40vin5>; }; }; }; @@ -2129,7 +2129,7 @@ cpu-thermal { polling-delay-passive = <250>; polling-delay = <0>; - thermal-sensors = <&thermal 0>; + thermal-sensors = <&thermal>; sustainable-power = <717>; cooling-maps { diff --git a/dts/src/arm64/renesas/r8a779a0.dtsi b/dts/src/arm64/renesas/r8a779a0.dtsi index b9731504b7..3d668709d8 100644 --- a/dts/src/arm64/renesas/r8a779a0.dtsi +++ b/dts/src/arm64/renesas/r8a779a0.dtsi @@ -41,6 +41,7 @@ device_type = "cpu"; power-domains = <&sysc R8A779A0_PD_A1E0D0C0>; next-level-cache = <&L3_CA76_0>; + clocks = <&cpg CPG_CORE R8A779A0_CLK_Z0>; }; L3_CA76_0: cache-controller-0 { @@ -105,7 +106,8 @@ }; gpio0: gpio@e6058180 { - compatible = "renesas,gpio-r8a779a0"; + compatible = "renesas,gpio-r8a779a0", + "renesas,rcar-gen4-gpio"; reg = <0 0xe6058180 0 0x54>; interrupts = <GIC_SPI 832 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 916>; @@ -119,7 +121,8 @@ }; gpio1: gpio@e6050180 { - compatible = "renesas,gpio-r8a779a0"; + compatible = "renesas,gpio-r8a779a0", + "renesas,rcar-gen4-gpio"; reg = <0 0xe6050180 0 0x54>; interrupts = <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 915>; @@ -133,7 +136,8 @@ }; gpio2: gpio@e6050980 { - compatible = "renesas,gpio-r8a779a0"; + compatible = "renesas,gpio-r8a779a0", + "renesas,rcar-gen4-gpio"; reg = <0 0xe6050980 0 0x54>; interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 915>; @@ -147,7 +151,8 @@ }; gpio3: gpio@e6058980 { - compatible = "renesas,gpio-r8a779a0"; + compatible = "renesas,gpio-r8a779a0", + "renesas,rcar-gen4-gpio"; reg = <0 0xe6058980 0 0x54>; interrupts = <GIC_SPI 844 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 916>; @@ -161,7 +166,8 @@ }; gpio4: gpio@e6060180 { - compatible = "renesas,gpio-r8a779a0"; + compatible = "renesas,gpio-r8a779a0", + "renesas,rcar-gen4-gpio"; reg = <0 0xe6060180 0 0x54>; interrupts = <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 917>; @@ -175,7 +181,8 @@ }; gpio5: gpio@e6060980 { - compatible = "renesas,gpio-r8a779a0"; + compatible = "renesas,gpio-r8a779a0", + "renesas,rcar-gen4-gpio"; reg = <0 0xe6060980 0 0x54>; interrupts = <GIC_SPI 852 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 917>; @@ -189,7 +196,8 @@ }; gpio6: gpio@e6068180 { - compatible = "renesas,gpio-r8a779a0"; + compatible = "renesas,gpio-r8a779a0", + "renesas,rcar-gen4-gpio"; reg = <0 0xe6068180 0 0x54>; interrupts = <GIC_SPI 856 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 918>; @@ -203,7 +211,8 @@ }; gpio7: gpio@e6068980 { - compatible = "renesas,gpio-r8a779a0"; + compatible = "renesas,gpio-r8a779a0", + "renesas,rcar-gen4-gpio"; reg = <0 0xe6068980 0 0x54>; interrupts = <GIC_SPI 860 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 918>; @@ -217,7 +226,8 @@ }; gpio8: gpio@e6069180 { - compatible = "renesas,gpio-r8a779a0"; + compatible = "renesas,gpio-r8a779a0", + "renesas,rcar-gen4-gpio"; reg = <0 0xe6069180 0 0x54>; interrupts = <GIC_SPI 864 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 918>; @@ -231,7 +241,8 @@ }; gpio9: gpio@e6069980 { - compatible = "renesas,gpio-r8a779a0"; + compatible = "renesas,gpio-r8a779a0", + "renesas,rcar-gen4-gpio"; reg = <0 0xe6069980 0 0x54>; interrupts = <GIC_SPI 868 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 918>; diff --git a/dts/src/arm64/renesas/r8a779f0-spider-cpu.dtsi b/dts/src/arm64/renesas/r8a779f0-spider-cpu.dtsi index 41aa8591b3..28fbf7bc1e 100644 --- a/dts/src/arm64/renesas/r8a779f0-spider-cpu.dtsi +++ b/dts/src/arm64/renesas/r8a779f0-spider-cpu.dtsi @@ -55,6 +55,11 @@ function = "i2c4"; }; + scif0_pins: scif0 { + groups = "scif0_data", "scif0_ctrl"; + function = "scif0"; + }; + scif3_pins: scif3 { groups = "scif3_data", "scif3_ctrl"; function = "scif3"; @@ -71,6 +76,14 @@ status = "okay"; }; +&scif0 { + pinctrl-0 = <&scif0_pins>; + pinctrl-names = "default"; + + uart-has-rtscts; + status = "okay"; +}; + &scif3 { pinctrl-0 = <&scif3_pins>; pinctrl-names = "default"; diff --git a/dts/src/arm64/renesas/r8a779f0-spider.dts b/dts/src/arm64/renesas/r8a779f0-spider.dts index 2e3b719cc7..7a7c8ffba7 100644 --- a/dts/src/arm64/renesas/r8a779f0-spider.dts +++ b/dts/src/arm64/renesas/r8a779f0-spider.dts @@ -15,6 +15,7 @@ aliases { serial0 = &scif3; + serial1 = &scif0; }; chosen { diff --git a/dts/src/arm64/renesas/r8a779f0.dtsi b/dts/src/arm64/renesas/r8a779f0.dtsi index df46fb87cf..384817ffa4 100644 --- a/dts/src/arm64/renesas/r8a779f0.dtsi +++ b/dts/src/arm64/renesas/r8a779f0.dtsi @@ -18,11 +18,171 @@ #address-cells = <1>; #size-cells = <0>; + cpu-map { + cluster0 { + core0 { + cpu = <&a55_0>; + }; + core1 { + cpu = <&a55_1>; + }; + }; + + cluster1 { + core0 { + cpu = <&a55_2>; + }; + core1 { + cpu = <&a55_3>; + }; + }; + + cluster2 { + core0 { + cpu = <&a55_4>; + }; + core1 { + cpu = <&a55_5>; + }; + }; + + cluster3 { + core0 { + cpu = <&a55_6>; + }; + core1 { + cpu = <&a55_7>; + }; + }; + }; + a55_0: cpu@0 { compatible = "arm,cortex-a55"; reg = <0>; device_type = "cpu"; power-domains = <&sysc R8A779F0_PD_A1E0D0C0>; + next-level-cache = <&L3_CA55_0>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&cpg CPG_CORE R8A779F0_CLK_Z0>; + }; + + a55_1: cpu@100 { + compatible = "arm,cortex-a55"; + reg = <0x100>; + device_type = "cpu"; + power-domains = <&sysc R8A779F0_PD_A1E0D0C1>; + next-level-cache = <&L3_CA55_0>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&cpg CPG_CORE R8A779F0_CLK_Z0>; + }; + + a55_2: cpu@10000 { + compatible = "arm,cortex-a55"; + reg = <0x10000>; + device_type = "cpu"; + power-domains = <&sysc R8A779F0_PD_A1E0D1C0>; + next-level-cache = <&L3_CA55_1>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&cpg CPG_CORE R8A779F0_CLK_Z0>; + }; + + a55_3: cpu@10100 { + compatible = "arm,cortex-a55"; + reg = <0x10100>; + device_type = "cpu"; + power-domains = <&sysc R8A779F0_PD_A1E0D1C1>; + next-level-cache = <&L3_CA55_1>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&cpg CPG_CORE R8A779F0_CLK_Z0>; + }; + + a55_4: cpu@20000 { + compatible = "arm,cortex-a55"; + reg = <0x20000>; + device_type = "cpu"; + power-domains = <&sysc R8A779F0_PD_A1E1D0C0>; + next-level-cache = <&L3_CA55_2>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&cpg CPG_CORE R8A779F0_CLK_Z1>; + }; + + a55_5: cpu@20100 { + compatible = "arm,cortex-a55"; + reg = <0x20100>; + device_type = "cpu"; + power-domains = <&sysc R8A779F0_PD_A1E1D0C1>; + next-level-cache = <&L3_CA55_2>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&cpg CPG_CORE R8A779F0_CLK_Z1>; + }; + + a55_6: cpu@30000 { + compatible = "arm,cortex-a55"; + reg = <0x30000>; + device_type = "cpu"; + power-domains = <&sysc R8A779F0_PD_A1E1D1C0>; + next-level-cache = <&L3_CA55_3>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&cpg CPG_CORE R8A779F0_CLK_Z1>; + }; + + a55_7: cpu@30100 { + compatible = "arm,cortex-a55"; + reg = <0x30100>; + device_type = "cpu"; + power-domains = <&sysc R8A779F0_PD_A1E1D1C1>; + next-level-cache = <&L3_CA55_3>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&cpg CPG_CORE R8A779F0_CLK_Z1>; + }; + + L3_CA55_0: cache-controller-0 { + compatible = "cache"; + power-domains = <&sysc R8A779F0_PD_A2E0D0>; + cache-unified; + cache-level = <3>; + }; + + L3_CA55_1: cache-controller-1 { + compatible = "cache"; + power-domains = <&sysc R8A779F0_PD_A2E0D1>; + cache-unified; + cache-level = <3>; + }; + + L3_CA55_2: cache-controller-2 { + compatible = "cache"; + power-domains = <&sysc R8A779F0_PD_A2E1D0>; + cache-unified; + cache-level = <3>; + }; + + L3_CA55_3: cache-controller-3 { + compatible = "cache"; + power-domains = <&sysc R8A779F0_PD_A2E1D1>; + cache-unified; + cache-level = <3>; + }; + + idle-states { + entry-method = "psci"; + + CPU_SLEEP_0: cpu-sleep-0 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + local-timer-stop; + entry-latency-us = <400>; + exit-latency-us = <500>; + min-residency-us = <4000>; + }; }; }; @@ -45,6 +205,11 @@ interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; }; + psci { + compatible = "arm,psci-1.0", "arm,psci-0.2"; + method = "smc"; + }; + /* External SCIF clock - to be overridden by boards that provide it */ scif_clk: scif { compatible = "fixed-clock"; @@ -157,6 +322,18 @@ #power-domain-cells = <1>; }; + tsc: thermal@e6198000 { + compatible = "renesas,r8a779f0-thermal"; + /* The 4th sensor is in control domain and not for Linux */ + reg = <0 0xe6198000 0 0x200>, + <0 0xe61a0000 0 0x200>, + <0 0xe61a8000 0 0x200>; + clocks = <&cpg CPG_MOD 919>; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 919>; + #thermal-sensor-cells = <1>; + }; + i2c0: i2c@e6500000 { compatible = "renesas,i2c-r8a779f0", "renesas,rcar-gen4-i2c"; @@ -259,6 +436,120 @@ status = "disabled"; }; + hscif0: serial@e6540000 { + compatible = "renesas,hscif-r8a779f0", + "renesas,rcar-gen4-hscif", "renesas,hscif"; + reg = <0 0xe6540000 0 0x60>; + interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 514>, + <&cpg CPG_CORE R8A779F0_CLK_S0D3>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x31>, <&dmac0 0x30>, + <&dmac1 0x31>, <&dmac1 0x30>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 514>; + status = "disabled"; + }; + + hscif1: serial@e6550000 { + compatible = "renesas,hscif-r8a779f0", + "renesas,rcar-gen4-hscif", "renesas,hscif"; + reg = <0 0xe6550000 0 0x60>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 515>, + <&cpg CPG_CORE R8A779F0_CLK_S0D3>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x33>, <&dmac0 0x32>, + <&dmac1 0x33>, <&dmac1 0x32>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 515>; + status = "disabled"; + }; + + hscif2: serial@e6560000 { + compatible = "renesas,hscif-r8a779f0", + "renesas,rcar-gen4-hscif", "renesas,hscif"; + reg = <0 0xe6560000 0 0x60>; + interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 516>, + <&cpg CPG_CORE R8A779F0_CLK_S0D3>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x35>, <&dmac0 0x34>, + <&dmac1 0x35>, <&dmac1 0x34>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 516>; + status = "disabled"; + }; + + hscif3: serial@e66a0000 { + compatible = "renesas,hscif-r8a779f0", + "renesas,rcar-gen4-hscif", "renesas,hscif"; + reg = <0 0xe66a0000 0 0x60>; + interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 517>, + <&cpg CPG_CORE R8A779F0_CLK_S0D3>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x37>, <&dmac0 0x36>, + <&dmac1 0x37>, <&dmac1 0x36>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 517>; + status = "disabled"; + }; + + ufs: ufs@e6860000 { + compatible = "renesas,r8a779f0-ufs"; + reg = <0 0xe6860000 0 0x100>; + interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 1514>, <&ufs30_clk>; + clock-names = "fck", "ref_clk"; + freq-table-hz = <200000000 200000000>, <38400000 38400000>; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 1514>; + status = "disabled"; + }; + + scif0: serial@e6e60000 { + compatible = "renesas,scif-r8a779f0", + "renesas,rcar-gen4-scif", "renesas,scif"; + reg = <0 0xe6e60000 0 64>; + interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 702>, + <&cpg CPG_CORE R8A779F0_CLK_S0D3_PER>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x51>, <&dmac0 0x50>, + <&dmac1 0x51>, <&dmac1 0x50>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 702>; + status = "disabled"; + }; + + scif1: serial@e6e68000 { + compatible = "renesas,scif-r8a779f0", + "renesas,rcar-gen4-scif", "renesas,scif"; + reg = <0 0xe6e68000 0 64>; + interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>, + <&cpg CPG_CORE R8A779F0_CLK_S0D3_PER>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x53>, <&dmac0 0x52>, + <&dmac1 0x53>, <&dmac1 0x52>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 703>; + status = "disabled"; + }; + scif3: serial@e6c50000 { compatible = "renesas,scif-r8a779f0", "renesas,rcar-gen4-scif", "renesas,scif"; @@ -268,11 +559,31 @@ <&cpg CPG_CORE R8A779F0_CLK_S0D3_PER>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x57>, <&dmac0 0x56>, + <&dmac1 0x57>, <&dmac1 0x56>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; resets = <&cpg 704>; status = "disabled"; }; + scif4: serial@e6c40000 { + compatible = "renesas,scif-r8a779f0", + "renesas,rcar-gen4-scif", "renesas,scif"; + reg = <0 0xe6c40000 0 64>; + interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 705>, + <&cpg CPG_CORE R8A779F0_CLK_S0D3_PER>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x59>, <&dmac0 0x58>, + <&dmac1 0x59>, <&dmac1 0x58>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 705>; + status = "disabled"; + }; + dmac0: dma-controller@e7350000 { compatible = "renesas,dmac-r8a779f0", "renesas,rcar-gen4-dmac"; @@ -306,6 +617,14 @@ resets = <&cpg 709>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>, + <&ipmmu_ds0 2>, <&ipmmu_ds0 3>, + <&ipmmu_ds0 4>, <&ipmmu_ds0 5>, + <&ipmmu_ds0 6>, <&ipmmu_ds0 7>, + <&ipmmu_ds0 8>, <&ipmmu_ds0 9>, + <&ipmmu_ds0 10>, <&ipmmu_ds0 11>, + <&ipmmu_ds0 12>, <&ipmmu_ds0 13>, + <&ipmmu_ds0 14>, <&ipmmu_ds0 15>; }; dmac1: dma-controller@e7351000 { @@ -341,6 +660,60 @@ resets = <&cpg 710>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_ds0 16>, <&ipmmu_ds0 17>, + <&ipmmu_ds0 18>, <&ipmmu_ds0 19>, + <&ipmmu_ds0 20>, <&ipmmu_ds0 21>, + <&ipmmu_ds0 22>, <&ipmmu_ds0 23>, + <&ipmmu_ds0 24>, <&ipmmu_ds0 25>, + <&ipmmu_ds0 26>, <&ipmmu_ds0 27>, + <&ipmmu_ds0 28>, <&ipmmu_ds0 29>, + <&ipmmu_ds0 30>, <&ipmmu_ds0 31>; + }; + + ipmmu_rt0: iommu@ee480000 { + compatible = "renesas,ipmmu-r8a779f0", + "renesas,rcar-gen4-ipmmu-vmsa"; + reg = <0 0xee480000 0 0x20000>; + renesas,ipmmu-main = <&ipmmu_mm 10>; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_rt1: iommu@ee4c0000 { + compatible = "renesas,ipmmu-r8a779f0", + "renesas,rcar-gen4-ipmmu-vmsa"; + reg = <0 0xee4c0000 0 0x20000>; + renesas,ipmmu-main = <&ipmmu_mm 19>; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_ds0: iommu@eed00000 { + compatible = "renesas,ipmmu-r8a779f0", + "renesas,rcar-gen4-ipmmu-vmsa"; + reg = <0 0xeed00000 0 0x20000>; + renesas,ipmmu-main = <&ipmmu_mm 0>; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_hc: iommu@eed40000 { + compatible = "renesas,ipmmu-r8a779f0", + "renesas,rcar-gen4-ipmmu-vmsa"; + reg = <0 0xeed40000 0 0x20000>; + renesas,ipmmu-main = <&ipmmu_mm 2>; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_mm: iommu@eefc0000 { + compatible = "renesas,ipmmu-r8a779f0", + "renesas,rcar-gen4-ipmmu-vmsa"; + reg = <0 0xeefc0000 0 0x20000>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + #iommu-cells = <1>; }; gic: interrupt-controller@f1000000 { @@ -351,7 +724,7 @@ reg = <0x0 0xf1000000 0 0x20000>, <0x0 0xf1060000 0 0x110000>; interrupts = <GIC_PPI 9 - (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>; + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; }; prr: chipid@fff00044 { @@ -360,11 +733,62 @@ }; }; + thermal-zones { + sensor_thermal1: sensor1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 0>; + + trips { + sensor1_crit: sensor1-crit { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + sensor_thermal2: sensor2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 1>; + + trips { + sensor2_crit: sensor2-crit { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + sensor_thermal3: sensor3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 2>; + + trips { + sensor3_crit: sensor3-crit { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; - interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + }; + + ufs30_clk: ufs30-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; }; }; diff --git a/dts/src/arm64/renesas/r8a779m8.dtsi b/dts/src/arm64/renesas/r8a779m8.dtsi index 752440b0c4..750bd8ccdb 100644 --- a/dts/src/arm64/renesas/r8a779m8.dtsi +++ b/dts/src/arm64/renesas/r8a779m8.dtsi @@ -10,3 +10,8 @@ / { compatible = "renesas,r8a779m8", "renesas,r8a7795"; }; + +&cluster0_opp { + /delete-node/ opp-1600000000; + /delete-node/ opp-1700000000; +}; diff --git a/dts/src/arm64/renesas/r9a07g043.dtsi b/dts/src/arm64/renesas/r9a07g043.dtsi index b31fb713ae..40201a16d6 100644 --- a/dts/src/arm64/renesas/r9a07g043.dtsi +++ b/dts/src/arm64/renesas/r9a07g043.dtsi @@ -483,8 +483,27 @@ }; adc: adc@10059000 { + compatible = "renesas,r9a07g043-adc", "renesas,rzg2l-adc"; reg = <0 0x10059000 0 0x400>; - /* place holder */ + interrupts = <GIC_SPI 347 IRQ_TYPE_EDGE_RISING>; + clocks = <&cpg CPG_MOD R9A07G043_ADC_ADCLK>, + <&cpg CPG_MOD R9A07G043_ADC_PCLK>; + clock-names = "adclk", "pclk"; + resets = <&cpg R9A07G043_ADC_PRESETN>, + <&cpg R9A07G043_ADC_ADRST_N>; + reset-names = "presetn", "adrst-n"; + power-domains = <&cpg>; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0>; + }; + channel@1 { + reg = <1>; + }; }; tsu: thermal@10059400 { diff --git a/dts/src/arm64/renesas/r9a07g043u11-smarc.dts b/dts/src/arm64/renesas/r9a07g043u11-smarc.dts index 2d740bd420..121e55282d 100644 --- a/dts/src/arm64/renesas/r9a07g043u11-smarc.dts +++ b/dts/src/arm64/renesas/r9a07g043u11-smarc.dts @@ -13,9 +13,3 @@ model = "Renesas SMARC EVK based on r9a07g043u11"; compatible = "renesas,smarc-evk", "renesas,r9a07g043u11", "renesas,r9a07g043"; }; - -&spi1 { - /delete-property/ pinctrl-0; - /delete-property/ pinctrl-names; - status = "disabled"; -}; diff --git a/dts/src/arm64/renesas/r9a07g054l2-smarc.dts b/dts/src/arm64/renesas/r9a07g054l2-smarc.dts index 4e07e1a0fb..3d01a4cf0f 100644 --- a/dts/src/arm64/renesas/r9a07g054l2-smarc.dts +++ b/dts/src/arm64/renesas/r9a07g054l2-smarc.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) /* - * Device Tree Source for the RZ/G2L SMARC EVK board + * Device Tree Source for the RZ/V2L SMARC EVK board * * Copyright (C) 2021 Renesas Electronics Corp. */ diff --git a/dts/src/arm64/renesas/r9a09g011-v2mevk2.dts b/dts/src/arm64/renesas/r9a09g011-v2mevk2.dts index c207d8ce55..c3a52fa0b1 100644 --- a/dts/src/arm64/renesas/r9a09g011-v2mevk2.dts +++ b/dts/src/arm64/renesas/r9a09g011-v2mevk2.dts @@ -14,6 +14,7 @@ aliases { serial0 = &uart0; + ethernet0 = &avb; }; chosen { @@ -35,6 +36,19 @@ }; }; +&avb { + renesas,no-ether-link; + phy-handle = <&phy0>; + phy-mode = "gmii"; + status = "okay"; + + phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id001c.c916", + "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; +}; + &extal_clk { clock-frequency = <48000000>; }; diff --git a/dts/src/arm64/renesas/r9a09g011.dtsi b/dts/src/arm64/renesas/r9a09g011.dtsi index 27810f4ad4..d4cc5459fb 100644 --- a/dts/src/arm64/renesas/r9a09g011.dtsi +++ b/dts/src/arm64/renesas/r9a09g011.dtsi @@ -62,6 +62,57 @@ clock-names = "clk"; }; + avb: ethernet@a3300000 { + compatible = "renesas,etheravb-r9a09g011","renesas,etheravb-rzv2m"; + reg = <0 0xa3300000 0 0x800>; + interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, /* ch0: Rx0 BE */ + <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, /* ch1: Rx1 NC */ + <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>, /* ch18: Tx0 BE */ + <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>, /* ch19: Tx1 NC */ + <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>, /* DiA */ + <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>, /* DiB */ + <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>, /* Line1_A */ + <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>, /* Line1_B */ + <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>, /* Line2_A */ + <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>, /* Line2_B */ + <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>; /* Line3 MAC */ + interrupt-names = "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15", + "ch16", "ch17", "ch18", "ch19", + "ch20", "ch21", "dia", "dib", + "err_a", "err_b", "mgmt_a", "mgmt_b", + "line3"; + clocks = <&cpg CPG_MOD R9A09G011_ETH0_CLK_AXI>, + <&cpg CPG_MOD R9A09G011_ETH0_CLK_CHI>, + <&cpg CPG_MOD R9A09G011_ETH0_GPTP_EXT>; + clock-names = "axi", "chi", "gptp"; + resets = <&cpg R9A09G011_ETH0_RST_HW_N>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disable"; + }; + cpg: clock-controller@a3500000 { compatible = "renesas,r9a09g011-cpg"; reg = <0 0xa3500000 0 0x1000>; diff --git a/dts/src/arm64/renesas/rzg2l-smarc-som.dtsi b/dts/src/arm64/renesas/rzg2l-smarc-som.dtsi index aeacd22e9e..9410796c8a 100644 --- a/dts/src/arm64/renesas/rzg2l-smarc-som.dtsi +++ b/dts/src/arm64/renesas/rzg2l-smarc-som.dtsi @@ -34,7 +34,7 @@ reg = <0x0 0x48000000 0x0 0x78000000>; }; - reg_1p8v: regulator0 { + reg_1p8v: regulator-1p8v { compatible = "regulator-fixed"; regulator-name = "fixed-1.8V"; regulator-min-microvolt = <1800000>; @@ -43,7 +43,7 @@ regulator-always-on; }; - reg_3p3v: regulator1 { + reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V"; regulator-min-microvolt = <3300000>; diff --git a/dts/src/arm64/renesas/rzg2lc-smarc-som.dtsi b/dts/src/arm64/renesas/rzg2lc-smarc-som.dtsi index 959a0ad1d3..78e6e2376b 100644 --- a/dts/src/arm64/renesas/rzg2lc-smarc-som.dtsi +++ b/dts/src/arm64/renesas/rzg2lc-smarc-som.dtsi @@ -23,7 +23,7 @@ reg = <0x0 0x48000000 0x0 0x38000000>; }; - reg_1p8v: regulator0 { + reg_1p8v: regulator-1p8v { compatible = "regulator-fixed"; regulator-name = "fixed-1.8V"; regulator-min-microvolt = <1800000>; @@ -32,7 +32,7 @@ regulator-always-on; }; - reg_3p3v: regulator1 { + reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V"; regulator-min-microvolt = <3300000>; diff --git a/dts/src/arm64/renesas/rzg2lc-smarc.dtsi b/dts/src/arm64/renesas/rzg2lc-smarc.dtsi index aa170492dd..6be25a8a28 100644 --- a/dts/src/arm64/renesas/rzg2lc-smarc.dtsi +++ b/dts/src/arm64/renesas/rzg2lc-smarc.dtsi @@ -29,7 +29,7 @@ #define SW_RSPI_CAN 1 #endif -#if (SW_SCIF_CAN & SW_RSPI_CAN) +#if (SW_SCIF_CAN && SW_RSPI_CAN) #error "Can not set 1 to both SW_SCIF_CAN and SW_RSPI_CAN due to HW routing" #endif diff --git a/dts/src/arm64/renesas/rzg2ul-smarc-som.dtsi b/dts/src/arm64/renesas/rzg2ul-smarc-som.dtsi index a663115f5a..cf3b3d118e 100644 --- a/dts/src/arm64/renesas/rzg2ul-smarc-som.dtsi +++ b/dts/src/arm64/renesas/rzg2ul-smarc-som.dtsi @@ -24,7 +24,7 @@ reg = <0x0 0x48000000 0x0 0x38000000>; }; - reg_1p8v: regulator0 { + reg_1p8v: regulator-1p8v { compatible = "regulator-fixed"; regulator-name = "fixed-1.8V"; regulator-min-microvolt = <1800000>; @@ -33,7 +33,7 @@ regulator-always-on; }; - reg_3p3v: regulator1 { + reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V"; regulator-min-microvolt = <3300000>; @@ -57,6 +57,14 @@ #endif }; +#if (SW_SW0_DEV_SEL) +&adc { + pinctrl-0 = <&adc_pins>; + pinctrl-names = "default"; + status = "okay"; +}; +#endif + #if (!SW_ET0_EN_N) ð0 { pinctrl-0 = <ð0_pins>; @@ -124,6 +132,10 @@ }; &pinctrl { + adc_pins: adc { + pinmux = <RZG2L_PORT_PINMUX(6, 2, 1)>; /* ADC_TRG */ + }; + eth0_pins: eth0 { pinmux = <RZG2L_PORT_PINMUX(4, 5, 1)>, /* ET0_LINKSTA */ <RZG2L_PORT_PINMUX(4, 3, 1)>, /* ET0_MDC */ @@ -209,6 +221,13 @@ pinmux = <RZG2L_PORT_PINMUX(0, 0, 1)>; /* SD0_CD */ }; }; + + spi1_pins: rspi1 { + pinmux = <RZG2L_PORT_PINMUX(4, 0, 2)>, /* CK */ + <RZG2L_PORT_PINMUX(4, 1, 2)>, /* MOSI */ + <RZG2L_PORT_PINMUX(4, 2, 2)>, /* MISO */ + <RZG2L_PORT_PINMUX(4, 3, 2)>; /* SSL */ + }; }; #if (SW_SW0_DEV_SEL) diff --git a/dts/src/arm64/renesas/rzg2ul-smarc.dtsi b/dts/src/arm64/renesas/rzg2ul-smarc.dtsi index 0051634d7b..f9835c1202 100644 --- a/dts/src/arm64/renesas/rzg2ul-smarc.dtsi +++ b/dts/src/arm64/renesas/rzg2ul-smarc.dtsi @@ -51,6 +51,12 @@ status = "disabled"; }; +&spi1 { + /delete-property/ pinctrl-0; + /delete-property/ pinctrl-names; + status = "disabled"; +}; + &ssi1 { /delete-property/ pinctrl-0; /delete-property/ pinctrl-names; diff --git a/dts/src/arm64/renesas/salvator-common.dtsi b/dts/src/arm64/renesas/salvator-common.dtsi index 31837fcd7b..b7c7911858 100644 --- a/dts/src/arm64/renesas/salvator-common.dtsi +++ b/dts/src/arm64/renesas/salvator-common.dtsi @@ -170,7 +170,7 @@ }; }; - reg_1p8v: regulator0 { + reg_1p8v: regulator-1p8v { compatible = "regulator-fixed"; regulator-name = "fixed-1.8V"; regulator-min-microvolt = <1800000>; @@ -179,7 +179,7 @@ regulator-always-on; }; - reg_3p3v: regulator1 { + reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V"; regulator-min-microvolt = <3300000>; @@ -188,7 +188,7 @@ regulator-always-on; }; - reg_12v: regulator2 { + reg_12v: regulator-12v { compatible = "regulator-fixed"; regulator-name = "fixed-12V"; regulator-min-microvolt = <12000000>; @@ -832,7 +832,7 @@ frame-master = <&rsnd_endpoint0>; playback = <&ssi0>, <&src0>, <&dvc0>; - capture = <&ssi1>, <&src1>, <&dvc1>; + capture = <&ssi1>, <&src1>, <&dvc1>; }; }; diff --git a/dts/src/arm64/renesas/salvator-panel-aa104xd12.dts b/dts/src/arm64/renesas/salvator-panel-aa104xd12.dts new file mode 100644 index 0000000000..c83a30adc6 --- /dev/null +++ b/dts/src/arm64/renesas/salvator-panel-aa104xd12.dts @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree overlay for the AA104XD12 panel connected to LVDS0 on a + * Salvator-X or Salvator-XS board + * + * Copyright 2021 Ideas on Board Oy + */ + +/dts-v1/; +/plugin/; + +&{/} { +#include "panel-aa104xd12.dtsi" +}; + +&{/panel} { + backlight = <&backlight>; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; +}; + +&lvds0 { + status = "okay"; + + ports { + port@1 { + lvds0_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; +}; diff --git a/dts/src/arm64/renesas/ulcb-kf.dtsi b/dts/src/arm64/renesas/ulcb-kf.dtsi index 5bcb84403e..408871c285 100644 --- a/dts/src/arm64/renesas/ulcb-kf.dtsi +++ b/dts/src/arm64/renesas/ulcb-kf.dtsi @@ -206,12 +206,12 @@ clocks = <&clksndsel>; clock-names = "scki"; - VDD1-supply = <&snd_3p3v>; - VDD2-supply = <&snd_3p3v>; - VCCAD1-supply = <&snd_vcc5v>; - VCCAD2-supply = <&snd_vcc5v>; - VCCDA1-supply = <&snd_vcc5v>; - VCCDA2-supply = <&snd_vcc5v>; + VDD1-supply = <&snd_3p3v>; + VDD2-supply = <&snd_3p3v>; + VCCAD1-supply = <&snd_vcc5v>; + VCCAD2-supply = <&snd_vcc5v>; + VCCDA1-supply = <&snd_vcc5v>; + VCCDA2-supply = <&snd_vcc5v>; ports { #address-cells = <1>; @@ -438,7 +438,7 @@ bitclock-master; frame-master; dai-tdm-slot-num = <6>; - capture = <&ssi4>; + capture = <&ssi4>; }; }; }; diff --git a/dts/src/arm64/renesas/ulcb.dtsi b/dts/src/arm64/renesas/ulcb.dtsi index 90a4c0629d..0772dfe4ad 100644 --- a/dts/src/arm64/renesas/ulcb.dtsi +++ b/dts/src/arm64/renesas/ulcb.dtsi @@ -76,7 +76,7 @@ }; }; - reg_1p8v: regulator0 { + reg_1p8v: regulator-1p8v { compatible = "regulator-fixed"; regulator-name = "fixed-1.8V"; regulator-min-microvolt = <1800000>; @@ -85,7 +85,7 @@ regulator-always-on; }; - reg_3p3v: regulator1 { + reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V"; regulator-min-microvolt = <3300000>; @@ -411,7 +411,7 @@ bitclock-master; frame-master; playback = <&ssi0>, <&src0>, <&dvc0>; - capture = <&ssi1>, <&src1>, <&dvc1>; + capture = <&ssi1>, <&src1>, <&dvc1>; }; }; rsnd_port1: port@1 { diff --git a/dts/src/arm64/rockchip/px30.dtsi b/dts/src/arm64/rockchip/px30.dtsi index 56dfbb2e2f..214f94fea3 100644 --- a/dts/src/arm64/rockchip/px30.dtsi +++ b/dts/src/arm64/rockchip/px30.dtsi @@ -528,7 +528,7 @@ i2c0: i2c@ff180000 { compatible = "rockchip,px30-i2c", "rockchip,rk3399-i2c"; reg = <0x0 0xff180000 0x0 0x1000>; - clocks = <&cru SCLK_I2C0>, <&cru PCLK_I2C0>; + clocks = <&cru SCLK_I2C0>, <&cru PCLK_I2C0>; clock-names = "i2c", "pclk"; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; diff --git a/dts/src/arm64/rockchip/rk3308-evb.dts b/dts/src/arm64/rockchip/rk3308-evb.dts index 9b4f855ea5..9fe9b0d110 100644 --- a/dts/src/arm64/rockchip/rk3308-evb.dts +++ b/dts/src/arm64/rockchip/rk3308-evb.dts @@ -75,7 +75,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pwr_key>; - power { + key-power { gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; label = "GPIO Key Power"; diff --git a/dts/src/arm64/rockchip/rk3308-rock-pi-s.dts b/dts/src/arm64/rockchip/rk3308-rock-pi-s.dts new file mode 100644 index 0000000000..a71f249ed3 --- /dev/null +++ b/dts/src/arm64/rockchip/rk3308-rock-pi-s.dts @@ -0,0 +1,253 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Akash Gajjar <akash@openedev.com> + * Copyright (c) 2019 Jagan Teki <jagan@openedev.com> + */ + +/dts-v1/; +#include "rk3308.dtsi" + +/ { + model = "Radxa ROCK Pi S"; + compatible = "radxa,rockpis", "rockchip,rk3308"; + + aliases { + ethernet0 = &gmac; + mmc0 = &emmc; + mmc1 = &sdmmc; + }; + + chosen { + stdout-path = "serial0:1500000n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&green_led_gio>, <&heartbeat_led_gpio>; + + green-led { + default-state = "on"; + gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; + label = "rockpis:green:power"; + linux,default-trigger = "default-on"; + }; + + blue-led { + default-state = "on"; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; + label = "rockpis:blue:user"; + linux,default-trigger = "heartbeat"; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-0 = <&wifi_enable_h>; + pinctrl-names = "default"; + reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; + }; + + vcc_1v8: vcc-1v8 { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_io>; + }; + + vcc_io: vcc-io { + compatible = "regulator-fixed"; + regulator-name = "vcc_io"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc_ddr: vcc-ddr { + compatible = "regulator-fixed"; + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_otg: vcc5v0-otg { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&otg_vbus_drv>; + regulator-name = "vcc5v0_otg"; + regulator-always-on; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_sys: vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vdd_core: vdd-core { + compatible = "pwm-regulator"; + pwms = <&pwm0 0 5000 1>; + pwm-supply = <&vcc5v0_sys>; + regulator-name = "vdd_core"; + regulator-min-microvolt = <827000>; + regulator-max-microvolt = <1340000>; + regulator-init-microvolt = <1015000>; + regulator-settling-time-up-us = <250>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_log: vdd-log { + compatible = "regulator-fixed"; + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_core>; +}; + +&emmc { + bus-width = <4>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + non-removable; + vmmc-supply = <&vcc_io>; + status = "okay"; +}; + +&gmac { + clock_in_out = "output"; + phy-supply = <&vcc_io>; + snps,reset-gpio = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 50000 50000>; + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&rtc_32k>; + + leds { + green_led_gio: green-led-gpio { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + heartbeat_led_gpio: heartbeat-led-gpio { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + otg_vbus_drv: otg-vbus-drv { + rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wifi_host_wake: wifi-host-wake { + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; +}; + +&pwm0 { + status = "okay"; + pinctrl-0 = <&pwm0_pin_pull_down>; +}; + +&saradc { + vref-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdio { + #address-cells = <1>; + #size-cells = <0>; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + max-frequency = <1000000>; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + sd-uhs-sdr104; + status = "okay"; +}; + +&sdmmc { + cap-sd-highspeed; + status = "okay"; +}; + +&u2phy { + status = "okay"; + + u2phy_host: host-port { + phy-supply = <&vcc5v0_otg>; + status = "okay"; + }; + + u2phy_otg: otg-port { + phy-supply = <&vcc5v0_otg>; + status = "okay"; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart4 { + status = "okay"; + + bluetooth { + compatible = "realtek,rtl8723bs-bt"; + device-wake-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>; + host-wake-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>; + }; +}; + +&usb_host_ehci { + status = "okay"; +}; + +&usb_host_ohci { + status = "okay"; +}; + +&usb20_otg { + dr_mode = "peripheral"; + status = "okay"; +}; + +&wdt { + status = "okay"; +}; diff --git a/dts/src/arm64/rockchip/rk3326-odroid-go2.dts b/dts/src/arm64/rockchip/rk3326-odroid-go2.dts index ea0695b51e..415aa9ff8b 100644 --- a/dts/src/arm64/rockchip/rk3326-odroid-go2.dts +++ b/dts/src/arm64/rockchip/rk3326-odroid-go2.dts @@ -71,82 +71,82 @@ * |------------------------------------------------| */ - sw1 { + button-sw1 { gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>; label = "DPAD-UP"; linux,code = <BTN_DPAD_UP>; }; - sw2 { + button-sw2 { gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>; label = "DPAD-DOWN"; linux,code = <BTN_DPAD_DOWN>; }; - sw3 { + button-sw3 { gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>; label = "DPAD-LEFT"; linux,code = <BTN_DPAD_LEFT>; }; - sw4 { + button-sw4 { gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>; label = "DPAD-RIGHT"; linux,code = <BTN_DPAD_RIGHT>; }; - sw5 { + button-sw5 { gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>; label = "BTN-A"; linux,code = <BTN_EAST>; }; - sw6 { + button-sw6 { gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_LOW>; label = "BTN-B"; linux,code = <BTN_SOUTH>; }; - sw7 { + button-sw7 { gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>; label = "BTN-Y"; linux,code = <BTN_WEST>; }; - sw8 { + button-sw8 { gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_LOW>; label = "BTN-X"; linux,code = <BTN_NORTH>; }; - sw9 { + button-sw9 { gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>; label = "F1"; linux,code = <BTN_TRIGGER_HAPPY1>; }; - sw10 { + button-sw10 { gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>; label = "F2"; linux,code = <BTN_TRIGGER_HAPPY2>; }; - sw11 { + button-sw11 { gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>; label = "F3"; linux,code = <BTN_TRIGGER_HAPPY3>; }; - sw12 { + button-sw12 { gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_LOW>; label = "F4"; linux,code = <BTN_TRIGGER_HAPPY4>; }; - sw13 { + button-sw13 { gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_LOW>; label = "F5"; linux,code = <BTN_TRIGGER_HAPPY5>; }; - sw14 { + button-sw14 { gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_LOW>; label = "F6"; linux,code = <BTN_TRIGGER_HAPPY6>; }; - sw15 { + button-sw15 { gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>; label = "TOP-LEFT"; linux,code = <BTN_TL>; }; - sw16 { + button-sw16 { gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_LOW>; label = "TOP-RIGHT"; linux,code = <BTN_TR>; diff --git a/dts/src/arm64/rockchip/rk3328-nanopi-r2s.dts b/dts/src/arm64/rockchip/rk3328-nanopi-r2s.dts index 3857d487ab..1445b879ac 100644 --- a/dts/src/arm64/rockchip/rk3328-nanopi-r2s.dts +++ b/dts/src/arm64/rockchip/rk3328-nanopi-r2s.dts @@ -34,7 +34,7 @@ pinctrl-0 = <&reset_button_pin>; pinctrl-names = "default"; - reset { + key-reset { label = "reset"; gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>; linux,code = <KEY_RESTART>; diff --git a/dts/src/arm64/rockchip/rk3368-evb.dtsi b/dts/src/arm64/rockchip/rk3368-evb.dtsi index 15d1fc541c..083452c677 100644 --- a/dts/src/arm64/rockchip/rk3368-evb.dtsi +++ b/dts/src/arm64/rockchip/rk3368-evb.dtsi @@ -76,7 +76,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pwr_key>; - power { + key-power { wakeup-source; gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; label = "GPIO Power"; diff --git a/dts/src/arm64/rockchip/rk3368-geekbox.dts b/dts/src/arm64/rockchip/rk3368-geekbox.dts index 62aa97a0b8..be06e6e64d 100644 --- a/dts/src/arm64/rockchip/rk3368-geekbox.dts +++ b/dts/src/arm64/rockchip/rk3368-geekbox.dts @@ -43,7 +43,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pwr_key>; - power { + key-power { gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; label = "GPIO Power"; linux,code = <KEY_POWER>; diff --git a/dts/src/arm64/rockchip/rk3368-orion-r68-meta.dts b/dts/src/arm64/rockchip/rk3368-orion-r68-meta.dts index 3ebe15e03c..7f5bba0c60 100644 --- a/dts/src/arm64/rockchip/rk3368-orion-r68-meta.dts +++ b/dts/src/arm64/rockchip/rk3368-orion-r68-meta.dts @@ -44,7 +44,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pwr_key>; - power { + key-power { wakeup-source; gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; label = "GPIO Power"; @@ -134,7 +134,7 @@ vccio_sd: vcc-io-sd-regulator { compatible = "regulator-fixed"; - regulator-name= "vccio_sd"; + regulator-name = "vccio_sd"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-always-on; diff --git a/dts/src/arm64/rockchip/rk3368-px5-evb.dts b/dts/src/arm64/rockchip/rk3368-px5-evb.dts index 5ccaa5f7a3..29df84b815 100644 --- a/dts/src/arm64/rockchip/rk3368-px5-evb.dts +++ b/dts/src/arm64/rockchip/rk3368-px5-evb.dts @@ -30,7 +30,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pwr_key>; - power { + key-power { gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; label = "GPIO Power"; linux,code = <KEY_POWER>; diff --git a/dts/src/arm64/rockchip/rk3368-r88.dts b/dts/src/arm64/rockchip/rk3368-r88.dts index 959d3cc801..38d757c005 100644 --- a/dts/src/arm64/rockchip/rk3368-r88.dts +++ b/dts/src/arm64/rockchip/rk3368-r88.dts @@ -37,7 +37,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pwr_key>; - power { + key-power { wakeup-source; gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; label = "GPIO Power"; diff --git a/dts/src/arm64/rockchip/rk3368.dtsi b/dts/src/arm64/rockchip/rk3368.dtsi index 4f0b5feaa5..a4c5aaf1f4 100644 --- a/dts/src/arm64/rockchip/rk3368.dtsi +++ b/dts/src/arm64/rockchip/rk3368.dtsi @@ -1084,7 +1084,7 @@ gmac { rgmii_pins: rgmii-pins { - rockchip,pins = <3 RK_PC6 1 &pcfg_pull_none>, + rockchip,pins = <3 RK_PC6 1 &pcfg_pull_none>, <3 RK_PD0 1 &pcfg_pull_none>, <3 RK_PC3 1 &pcfg_pull_none>, <3 RK_PB0 1 &pcfg_pull_none_12ma>, @@ -1102,7 +1102,7 @@ }; rmii_pins: rmii-pins { - rockchip,pins = <3 RK_PC6 1 &pcfg_pull_none>, + rockchip,pins = <3 RK_PC6 1 &pcfg_pull_none>, <3 RK_PD0 1 &pcfg_pull_none>, <3 RK_PC3 1 &pcfg_pull_none>, <3 RK_PB0 1 &pcfg_pull_none_12ma>, @@ -1257,7 +1257,7 @@ spdif { spdif_tx: spdif-tx { - rockchip,pins = <2 RK_PC7 1 &pcfg_pull_none>; + rockchip,pins = <2 RK_PC7 1 &pcfg_pull_none>; }; }; diff --git a/dts/src/arm64/rockchip/rk3399-evb.dts b/dts/src/arm64/rockchip/rk3399-evb.dts index 7b717ebec8..3d1e126b55 100644 --- a/dts/src/arm64/rockchip/rk3399-evb.dts +++ b/dts/src/arm64/rockchip/rk3399-evb.dts @@ -55,7 +55,7 @@ }; edp_panel: edp-panel { - compatible ="lg,lp079qx1-sp0v"; + compatible = "lg,lp079qx1-sp0v"; backlight = <&backlight>; enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>; power-supply = <&vcc3v3_s0>; diff --git a/dts/src/arm64/rockchip/rk3399-firefly.dts b/dts/src/arm64/rockchip/rk3399-firefly.dts index b340c9e246..c5db64f3e1 100644 --- a/dts/src/arm64/rockchip/rk3399-firefly.dts +++ b/dts/src/arm64/rockchip/rk3399-firefly.dts @@ -87,7 +87,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pwrbtn>; - power { + key-power { debounce-interval = <100>; gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; label = "GPIO Key Power"; diff --git a/dts/src/arm64/rockchip/rk3399-gru-chromebook.dtsi b/dts/src/arm64/rockchip/rk3399-gru-chromebook.dtsi index 50d459ee48..cd07464188 100644 --- a/dts/src/arm64/rockchip/rk3399-gru-chromebook.dtsi +++ b/dts/src/arm64/rockchip/rk3399-gru-chromebook.dtsi @@ -206,7 +206,7 @@ pinctrl-names = "default"; pinctrl-0 = <&bt_host_wake_l>; - wake_on_bt: wake-on-bt { + wake_on_bt: key-wake-on-bt { label = "Wake-on-Bluetooth"; gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; linux,code = <KEY_WAKEUP>; diff --git a/dts/src/arm64/rockchip/rk3399-gru-kevin.dts b/dts/src/arm64/rockchip/rk3399-gru-kevin.dts index 6863689df0..2cc9b3386c 100644 --- a/dts/src/arm64/rockchip/rk3399-gru-kevin.dts +++ b/dts/src/arm64/rockchip/rk3399-gru-kevin.dts @@ -92,7 +92,7 @@ pinctrl-names = "default"; pinctrl-0 = <&bt_host_wake_l>, <&cpu1_pen_eject>; - pen-insert { + switch-pen-insert { label = "Pen Insert"; /* Insert = low, eject = high */ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm64/rockchip/rk3399-gru-scarlet.dtsi b/dts/src/arm64/rockchip/rk3399-gru-scarlet.dtsi index 1977103a5e..40d4053fba 100644 --- a/dts/src/arm64/rockchip/rk3399-gru-scarlet.dtsi +++ b/dts/src/arm64/rockchip/rk3399-gru-scarlet.dtsi @@ -183,7 +183,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pen_eject_odl>; - pen-insert { + switch-pen-insert { label = "Pen Insert"; /* Insert = low, eject = high */ gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm64/rockchip/rk3399-khadas-edge.dtsi b/dts/src/arm64/rockchip/rk3399-khadas-edge.dtsi index 46c4581deb..2a332763c3 100644 --- a/dts/src/arm64/rockchip/rk3399-khadas-edge.dtsi +++ b/dts/src/arm64/rockchip/rk3399-khadas-edge.dtsi @@ -136,7 +136,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pwrbtn>; - power { + key-power { debounce-interval = <100>; gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; label = "GPIO Key Power"; diff --git a/dts/src/arm64/rockchip/rk3399-nanopi-r4s.dts b/dts/src/arm64/rockchip/rk3399-nanopi-r4s.dts index cef4d18b59..fe5b526100 100644 --- a/dts/src/arm64/rockchip/rk3399-nanopi-r4s.dts +++ b/dts/src/arm64/rockchip/rk3399-nanopi-r4s.dts @@ -46,9 +46,9 @@ gpio-keys { pinctrl-0 = <&reset_button_pin>; - /delete-node/ power; + /delete-node/ key-power; - reset { + key-reset { debounce-interval = <50>; gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>; label = "reset"; diff --git a/dts/src/arm64/rockchip/rk3399-nanopi4.dtsi b/dts/src/arm64/rockchip/rk3399-nanopi4.dtsi index 248ad41a97..278123b4f9 100644 --- a/dts/src/arm64/rockchip/rk3399-nanopi4.dtsi +++ b/dts/src/arm64/rockchip/rk3399-nanopi4.dtsi @@ -111,7 +111,7 @@ pinctrl-names = "default"; pinctrl-0 = <&power_key>; - power { + key-power { debounce-interval = <100>; gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; label = "GPIO Key Power"; diff --git a/dts/src/arm64/rockchip/rk3399-orangepi.dts b/dts/src/arm64/rockchip/rk3399-orangepi.dts index ed856bfcfc..9e2e246e0b 100644 --- a/dts/src/arm64/rockchip/rk3399-orangepi.dts +++ b/dts/src/arm64/rockchip/rk3399-orangepi.dts @@ -78,7 +78,7 @@ compatible = "gpio-keys"; autorepeat; - power { + key-power { debounce-interval = <100>; gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; label = "GPIO Power"; diff --git a/dts/src/arm64/rockchip/rk3399-pinebook-pro.dts b/dts/src/arm64/rockchip/rk3399-pinebook-pro.dts index d6b68d77d6..194e48c755 100644 --- a/dts/src/arm64/rockchip/rk3399-pinebook-pro.dts +++ b/dts/src/arm64/rockchip/rk3399-pinebook-pro.dts @@ -76,7 +76,7 @@ pinctrl-names = "default"; pinctrl-0 = <&lidbtn_pin>; - lid { + switch-lid { debounce-interval = <20>; gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_LOW>; label = "Lid"; @@ -92,7 +92,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pwrbtn_pin>; - power { + key-power { debounce-interval = <20>; gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; label = "Power"; diff --git a/dts/src/arm64/rockchip/rk3399-puma-haikou.dts b/dts/src/arm64/rockchip/rk3399-puma-haikou.dts index 3ae5d727e3..04c752f49b 100644 --- a/dts/src/arm64/rockchip/rk3399-puma-haikou.dts +++ b/dts/src/arm64/rockchip/rk3399-puma-haikou.dts @@ -49,7 +49,7 @@ sgtl5000_clk: sgtl5000-oscillator { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <24576000>; + clock-frequency = <24576000>; }; dc_12v: dc-12v { diff --git a/dts/src/arm64/rockchip/rk3399-roc-pc.dtsi b/dts/src/arm64/rockchip/rk3399-roc-pc.dtsi index 0e45cc2d19..acb174d3a8 100644 --- a/dts/src/arm64/rockchip/rk3399-roc-pc.dtsi +++ b/dts/src/arm64/rockchip/rk3399-roc-pc.dtsi @@ -54,7 +54,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pwr_key_l>; - power { + key-power { debounce-interval = <100>; gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; label = "GPIO Key Power"; diff --git a/dts/src/arm64/rockchip/rk3399-rockpro64.dtsi b/dts/src/arm64/rockchip/rk3399-rockpro64.dtsi index 45e77f86d3..78157521e9 100644 --- a/dts/src/arm64/rockchip/rk3399-rockpro64.dtsi +++ b/dts/src/arm64/rockchip/rk3399-rockpro64.dtsi @@ -20,6 +20,15 @@ stdout-path = "serial2:1500000n8"; }; + /* enable for panel backlight support */ + backlight: backlight { + compatible = "pwm-backlight"; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <5>; + pwms = <&pwm0 0 1000000 0>; + status = "disabled"; + }; + clkin_gmac: external-gmac-clock { compatible = "fixed-clock"; clock-frequency = <125000000>; @@ -33,7 +42,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pwrbtn>; - power { + key-power { debounce-interval = <100>; gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; label = "GPIO Key Power"; @@ -107,6 +116,14 @@ }; }; + avdd: avdd-regulator { + compatible = "regulator-fixed"; + regulator-name = "avdd"; + regulator-min-microvolt = <11000000>; + regulator-max-microvolt = <11000000>; + vin-supply = <&vcc3v3_s0>; + }; + vcc12v_dcin: vcc12v-dcin { compatible = "regulator-fixed"; regulator-name = "vcc12v_dcin"; @@ -400,8 +417,6 @@ vcc3v0_touch: LDO_REG2 { regulator-name = "vcc3v0_touch"; - regulator-always-on; - regulator-boot-on; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-state-mem { @@ -490,8 +505,6 @@ vcc3v3_s0: SWITCH_REG2 { regulator-name = "vcc3v3_s0"; - regulator-always-on; - regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; @@ -565,6 +578,19 @@ vbus-supply = <&vcc5v0_typec>; status = "okay"; }; + + /* enable for pine64 touch screen support */ + touch: touchscreen@5d { + compatible = "goodix,gt911"; + reg = <0x5d>; + interrupt-parent = <&gpio4>; + interrupts = <RK_PD5 IRQ_TYPE_EDGE_FALLING>; + AVDD28-supply = <&vcc3v0_touch>; + VDDIO-supply = <&vcc3v0_touch>; + irq-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; }; &i2s0 { @@ -600,6 +626,42 @@ gpio1830-supply = <&vcc_3v0>; }; +/* enable for pine64 panel display support */ +&mipi_dsi { + clock-master; + status = "disabled"; + + ports { + mipi_out: port@1 { + reg = <1>; + + mipi_out_panel: endpoint { + remote-endpoint = <&mipi_in_panel>; + }; + }; + }; + + mipi_panel: panel@0 { + compatible = "feiyang,fy07024di26a30d"; + reg = <0>; + avdd-supply = <&avdd>; + backlight = <&backlight>; + dvdd-supply = <&vcc3v3_s0>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mipi_in_panel: endpoint { + remote-endpoint = <&mipi_out_panel>; + }; + }; + }; + }; +}; + &pcie0 { ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; num-lanes = <4>; diff --git a/dts/src/arm64/rockchip/rk3399-sapphire-excavator.dts b/dts/src/arm64/rockchip/rk3399-sapphire-excavator.dts index f6b2199a42..13927e7d07 100644 --- a/dts/src/arm64/rockchip/rk3399-sapphire-excavator.dts +++ b/dts/src/arm64/rockchip/rk3399-sapphire-excavator.dts @@ -88,7 +88,7 @@ }; edp_panel: edp-panel { - compatible ="lg,lp079qx1-sp0v"; + compatible = "lg,lp079qx1-sp0v"; backlight = <&backlight>; enable-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; diff --git a/dts/src/arm64/rockchip/rk3399-sapphire.dtsi b/dts/src/arm64/rockchip/rk3399-sapphire.dtsi index 2aa0fad8f8..e6ac292ce6 100644 --- a/dts/src/arm64/rockchip/rk3399-sapphire.dtsi +++ b/dts/src/arm64/rockchip/rk3399-sapphire.dtsi @@ -53,7 +53,7 @@ compatible = "gpio-keys"; autorepeat; - power { + key-power { debounce-interval = <100>; gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; label = "GPIO Power"; diff --git a/dts/src/arm64/rockchip/rk3399pro-vmarc-som.dtsi b/dts/src/arm64/rockchip/rk3399pro-vmarc-som.dtsi index 01d1a75c8b..935b8c68a7 100644 --- a/dts/src/arm64/rockchip/rk3399pro-vmarc-som.dtsi +++ b/dts/src/arm64/rockchip/rk3399pro-vmarc-som.dtsi @@ -347,7 +347,7 @@ pcie { pcie_pwr: pcie-pwr { - rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>; }; }; diff --git a/dts/src/arm64/rockchip/rk3566-pinenote.dtsi b/dts/src/arm64/rockchip/rk3566-pinenote.dtsi index e01668e6e5..0d45868132 100644 --- a/dts/src/arm64/rockchip/rk3566-pinenote.dtsi +++ b/dts/src/arm64/rockchip/rk3566-pinenote.dtsi @@ -49,7 +49,7 @@ pinctrl-0 = <&hall_int_l>; pinctrl-names = "default"; - cover { + switch-cover { label = "cover"; gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_LOW>; linux,input-type = <EV_SW>; diff --git a/dts/src/arm64/rockchip/rk3566-quartz64-a.dts b/dts/src/arm64/rockchip/rk3566-quartz64-a.dts index fa953b7366..d943559b15 100644 --- a/dts/src/arm64/rockchip/rk3566-quartz64-a.dts +++ b/dts/src/arm64/rockchip/rk3566-quartz64-a.dts @@ -4,6 +4,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> #include "rk3566.dtsi" / { @@ -32,9 +33,22 @@ gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>; gpio-fan,speed-map = <0 0 4500 1>; + pinctrl-names = "default"; + pinctrl-0 = <&fan_en_h>; #cooling-cells = <2>; }; + hdmi-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; @@ -125,6 +139,18 @@ vin-supply = <&vcc12v_dcin>; }; + vcc3v3_pcie_p: vcc3v3-pcie-p-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_enable_h>; + regulator-name = "vcc3v3_pcie_p"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3>; + }; + vcc5v0_usb: vcc5v0_usb { compatible = "regulator-fixed"; regulator-name = "vcc5v0_usb"; @@ -201,6 +227,10 @@ status = "okay"; }; +&combphy2 { + status = "okay"; +}; + &cpu0 { cpu-supply = <&vdd_cpu>; }; @@ -262,6 +292,28 @@ status = "okay"; }; +&hdmi { + avdd-0v9-supply = <&vdda_0v9>; + avdd-1v8-supply = <&vcc_1v8>; + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdmi_sound { + status = "okay"; +}; + &i2c0 { status = "okay"; @@ -492,6 +544,10 @@ status = "okay"; }; +&i2s0_8ch { + status = "okay"; +}; + &i2s1_8ch { pinctrl-names = "default"; pinctrl-0 = <&i2s1m0_sclktx @@ -509,6 +565,14 @@ }; }; +&pcie2x1 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_reset_h>; + reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie_p>; + status = "okay"; +}; + &pinctrl { bt { bt_enable_h: bt-enable-h { @@ -524,6 +588,12 @@ }; }; + fan { + fan_en_h: fan-en-h { + rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + leds { work_led_enable_h: work-led-enable-h { rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; @@ -534,6 +604,16 @@ }; }; + pcie { + pcie_enable_h: pcie-enable-h { + rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie_reset_h: pcie-reset-h { + rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pmic { pmic_int_l: pmic-int-l { rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; @@ -588,6 +668,7 @@ disable-wp; pinctrl-names = "default"; pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; + sd-uhs-sdr104; vmmc-supply = <&vcc3v3_sd>; vqmmc-supply = <&vccio_sd>; status = "okay"; @@ -608,6 +689,22 @@ status = "okay"; }; +&sfc { + pinctrl-0 = <&fspi_pins>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <24000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <1>; + }; +}; + /* spdif is exposed on con40 pin 18 */ &spdif { status = "okay"; @@ -723,3 +820,20 @@ phy-supply = <&vcc5v0_usb20_host>; status = "okay"; }; + +&vop { + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi_in_vp0>; + }; +}; diff --git a/dts/src/arm64/rockchip/rk3566.dtsi b/dts/src/arm64/rockchip/rk3566.dtsi index 0b957068ff..6c4b17d27b 100644 --- a/dts/src/arm64/rockchip/rk3566.dtsi +++ b/dts/src/arm64/rockchip/rk3566.dtsi @@ -29,3 +29,7 @@ extcon = <&usb2phy0>; maximum-speed = "high-speed"; }; + +&vop { + compatible = "rockchip,rk3566-vop"; +}; diff --git a/dts/src/arm64/rockchip/rk3568-bpi-r2-pro.dts b/dts/src/arm64/rockchip/rk3568-bpi-r2-pro.dts index 40cf2236c0..5e34bd0b21 100644 --- a/dts/src/arm64/rockchip/rk3568-bpi-r2-pro.dts +++ b/dts/src/arm64/rockchip/rk3568-bpi-r2-pro.dts @@ -8,6 +8,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> #include "rk3568.dtsi" / { @@ -54,6 +55,17 @@ regulator-max-microvolt = <12000000>; }; + hdmi-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + vcc3v3_sys: vcc3v3-sys { compatible = "regulator-fixed"; regulator-name = "vcc3v3_sys"; @@ -174,6 +186,33 @@ status = "okay"; }; +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&hdmi { + avdd-0v9-supply = <&vdda0v9_image>; + avdd-1v8-supply = <&vcca1v8_image>; + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdmi_sound { + status = "okay"; +}; + &i2c0 { status = "okay"; @@ -215,6 +254,7 @@ vdd_gpu: DCDC_REG2 { regulator-name = "vdd_gpu"; + regulator-always-on; regulator-init-microvolt = <900000>; regulator-initial-mode = <0x2>; regulator-min-microvolt = <500000>; @@ -264,6 +304,7 @@ vdda0v9_image: LDO_REG1 { regulator-name = "vdda0v9_image"; + regulator-always-on; regulator-min-microvolt = <900000>; regulator-max-microvolt = <900000>; @@ -359,6 +400,7 @@ vcca1v8_image: LDO_REG9 { regulator-name = "vcca1v8_image"; + regulator-always-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -389,11 +431,81 @@ }; }; +&i2c3 { + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PD3 IRQ_TYPE_EDGE_FALLING>; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "rtcic_32kout"; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + wakeup-source; + }; +}; + &i2c5 { /* pin 3 (SDA) + 4 (SCL) of header con2 */ status = "disabled"; }; +&i2s0_8ch { + /* hdmi sound */ + status = "okay"; +}; + +&mdio0 { + #address-cells = <1>; + #size-cells = <0>; + + switch@0 { + compatible = "mediatek,mt7531"; + reg = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + label = "lan0"; + }; + + port@2 { + reg = <2>; + label = "lan1"; + }; + + port@3 { + reg = <3>; + label = "lan2"; + }; + + port@4 { + reg = <4>; + label = "lan3"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&gmac0>; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + }; + }; +}; + &mdio1 { rgmii_phy1: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c22"; @@ -411,6 +523,12 @@ }; }; + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pmic { pmic_int: pmic_int { rockchip,pins = @@ -523,6 +641,8 @@ }; &tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <0>; status = "okay"; }; @@ -587,3 +707,20 @@ phy-supply = <&vcc5v0_usb_otg>; status = "okay"; }; + +&vop { + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi_in_vp0>; + }; +}; diff --git a/dts/src/arm64/rockchip/rk3568-evb1-v10.dts b/dts/src/arm64/rockchip/rk3568-evb1-v10.dts index 622be8be98..6ff89ff95a 100644 --- a/dts/src/arm64/rockchip/rk3568-evb1-v10.dts +++ b/dts/src/arm64/rockchip/rk3568-evb1-v10.dts @@ -8,6 +8,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> #include "rk3568.dtsi" / { @@ -34,6 +35,17 @@ regulator-max-microvolt = <12000000>; }; + hdmi-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; @@ -209,6 +221,28 @@ status = "okay"; }; +&hdmi { + avdd-0v9-supply = <&vdda0v9_image>; + avdd-1v8-supply = <&vcca1v8_image>; + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdmi_sound { + status = "okay"; +}; + &i2c0 { status = "okay"; @@ -466,6 +500,10 @@ }; }; +&i2s0_8ch { + status = "okay"; +}; + &i2s1_8ch { rockchip,trcm-sync-tx-only; status = "okay"; @@ -635,3 +673,20 @@ phy-supply = <&vcc5v0_usb_host>; status = "okay"; }; + +&vop { + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi_in_vp0>; + }; +}; diff --git a/dts/src/arm64/rockchip/rk3568-rock-3a.dts b/dts/src/arm64/rockchip/rk3568-rock-3a.dts index 0813c0c5ab..6b5093a1a6 100644 --- a/dts/src/arm64/rockchip/rk3568-rock-3a.dts +++ b/dts/src/arm64/rockchip/rk3568-rock-3a.dts @@ -4,6 +4,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> #include "rk3568.dtsi" / { @@ -20,6 +21,17 @@ stdout-path = "serial2:1500000n8"; }; + hdmi-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; @@ -166,6 +178,28 @@ status = "okay"; }; +&hdmi { + avdd-0v9-supply = <&vdda0v9_image>; + avdd-1v8-supply = <&vcca1v8_image>; + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdmi_sound { + status = "okay"; +}; + &i2c0 { status = "okay"; @@ -406,6 +440,10 @@ }; }; +&i2s0_8ch { + status = "okay"; +}; + &i2s1_8ch { rockchip,trcm-sync-tx-only; status = "okay"; @@ -560,3 +598,20 @@ phy-supply = <&vcc5v0_usb_host>; status = "okay"; }; + +&vop { + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi_in_vp0>; + }; +}; diff --git a/dts/src/arm64/rockchip/rk3568.dtsi b/dts/src/arm64/rockchip/rk3568.dtsi index 5eafddf62e..2bdf8c7e97 100644 --- a/dts/src/arm64/rockchip/rk3568.dtsi +++ b/dts/src/arm64/rockchip/rk3568.dtsi @@ -137,3 +137,7 @@ phys = <&usb2phy0_otg>, <&combphy0 PHY_TYPE_USB3>; phy-names = "usb2-phy", "usb3-phy"; }; + +&vop { + compatible = "rockchip,rk3568-vop"; +}; diff --git a/dts/src/arm64/rockchip/rk356x.dtsi b/dts/src/arm64/rockchip/rk356x.dtsi index 914f13c0d3..319981c3e9 100644 --- a/dts/src/arm64/rockchip/rk356x.dtsi +++ b/dts/src/arm64/rockchip/rk356x.dtsi @@ -129,6 +129,11 @@ }; }; + display_subsystem: display-subsystem { + compatible = "rockchip,display-subsystem"; + ports = <&vop_out>; + }; + firmware { scmi: scmi { compatible = "arm,scmi-smc"; @@ -178,6 +183,22 @@ }; }; + hdmi_sound: hdmi-sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "HDMI"; + simple-audio-card,format = "i2s"; + simple-audio-card,mclk-fs = <256>; + status = "disabled"; + + simple-audio-card,codec { + sound-dai = <&hdmi>; + }; + + simple-audio-card,cpu { + sound-dai = <&i2s0_8ch>; + }; + }; + pmu { compatible = "arm,cortex-a55-pmu"; interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>, @@ -632,6 +653,84 @@ }; }; + vop: vop@fe040000 { + reg = <0x0 0xfe040000 0x0 0x3000>, <0x0 0xfe044000 0x0 0x1000>; + reg-names = "vop", "gamma-lut"; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>, <&cru DCLK_VOP0>, + <&cru DCLK_VOP1>, <&cru DCLK_VOP2>; + clock-names = "aclk", "hclk", "dclk_vp0", "dclk_vp1", "dclk_vp2"; + iommus = <&vop_mmu>; + power-domains = <&power RK3568_PD_VO>; + rockchip,grf = <&grf>; + status = "disabled"; + + vop_out: ports { + #address-cells = <1>; + #size-cells = <0>; + + vp0: port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + vp1: port@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + vp2: port@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + + vop_mmu: iommu@fe043e00 { + compatible = "rockchip,rk3568-iommu"; + reg = <0x0 0xfe043e00 0x0 0x100>, <0x0 0xfe043f00 0x0 0x100>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>; + clock-names = "aclk", "iface"; + #iommu-cells = <0>; + status = "disabled"; + }; + + hdmi: hdmi@fe0a0000 { + compatible = "rockchip,rk3568-dw-hdmi"; + reg = <0x0 0xfe0a0000 0x0 0x20000>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_HDMI_HOST>, + <&cru CLK_HDMI_SFR>, + <&cru CLK_HDMI_CEC>, + <&pmucru CLK_HDMI_REF>, + <&cru HCLK_VO>; + clock-names = "iahb", "isfr", "cec", "ref"; + pinctrl-names = "default"; + pinctrl-0 = <&hdmitx_scl &hdmitx_sda &hdmitxm0_cec>; + power-domains = <&power RK3568_PD_VO>; + reg-io-width = <4>; + rockchip,grf = <&grf>; + #sound-dai-cells = <0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + hdmi_in: port@0 { + reg = <0>; + }; + + hdmi_out: port@1 { + reg = <1>; + }; + }; + }; + qos_gpu: qos@fe128000 { compatible = "rockchip,rk3568-qos", "syscon"; reg = <0x0 0xfe128000 0x0 0x20>; @@ -752,6 +851,56 @@ reg = <0x0 0xfe1a8100 0x0 0x20>; }; + pcie2x1: pcie@fe260000 { + compatible = "rockchip,rk3568-pcie"; + reg = <0x3 0xc0000000 0x0 0x00400000>, + <0x0 0xfe260000 0x0 0x00010000>, + <0x3 0x3f000000 0x0 0x01000000>; + reg-names = "dbi", "apb", "config"; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "sys", "pmc", "msi", "legacy", "err"; + bus-range = <0x0 0xf>; + clocks = <&cru ACLK_PCIE20_MST>, <&cru ACLK_PCIE20_SLV>, + <&cru ACLK_PCIE20_DBI>, <&cru PCLK_PCIE20>, + <&cru CLK_PCIE20_AUX_NDFT>; + clock-names = "aclk_mst", "aclk_slv", + "aclk_dbi", "pclk", "aux"; + device_type = "pci"; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc 0>, + <0 0 0 2 &pcie_intc 1>, + <0 0 0 3 &pcie_intc 2>, + <0 0 0 4 &pcie_intc 3>; + linux,pci-domain = <0>; + num-ib-windows = <6>; + num-ob-windows = <2>; + max-link-speed = <2>; + msi-map = <0x0 &gic 0x0 0x1000>; + num-lanes = <1>; + phys = <&combphy2 PHY_TYPE_PCIE>; + phy-names = "pcie-phy"; + power-domains = <&power RK3568_PD_PIPE>; + ranges = <0x01000000 0x0 0x3ef00000 0x3 0x3ef00000 0x0 0x00100000 + 0x02000000 0x0 0x00000000 0x3 0x00000000 0x0 0x3ef00000>; + resets = <&cru SRST_PCIE20_POWERUP>; + reset-names = "pipe"; + #address-cells = <3>; + #size-cells = <2>; + status = "disabled"; + + pcie_intc: legacy-interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>; + }; + }; + sdmmc0: mmc@fe2b0000 { compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xfe2b0000 0x0 0x4000>; @@ -818,6 +967,23 @@ status = "disabled"; }; + i2s0_8ch: i2s@fe400000 { + compatible = "rockchip,rk3568-i2s-tdm"; + reg = <0x0 0xfe400000 0x0 0x1000>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + assigned-clocks = <&cru CLK_I2S0_8CH_TX_SRC>, <&cru CLK_I2S0_8CH_RX_SRC>; + assigned-clock-rates = <1188000000>, <1188000000>; + clocks = <&cru MCLK_I2S0_8CH_TX>, <&cru MCLK_I2S0_8CH_RX>, <&cru HCLK_I2S0_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + dmas = <&dmac1 0>; + dma-names = "tx"; + resets = <&cru SRST_M_I2S0_8CH_TX>, <&cru SRST_M_I2S0_8CH_RX>; + reset-names = "tx-m", "rx-m"; + rockchip,grf = <&grf>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + i2s1_8ch: i2s@fe410000 { compatible = "rockchip,rk3568-i2s-tdm"; reg = <0x0 0xfe410000 0x0 0x1000>; diff --git a/dts/src/arm64/socionext/uniphier-pxs3.dtsi b/dts/src/arm64/socionext/uniphier-pxs3.dtsi index be97da1322..ba75adedbf 100644 --- a/dts/src/arm64/socionext/uniphier-pxs3.dtsi +++ b/dts/src/arm64/socionext/uniphier-pxs3.dtsi @@ -599,8 +599,8 @@ compatible = "socionext,uniphier-dwc3", "snps,dwc3"; status = "disabled"; reg = <0x65a00000 0xcd00>; - interrupt-names = "host", "peripheral"; - interrupts = <0 134 4>, <0 135 4>; + interrupt-names = "dwc_usb3"; + interrupts = <0 134 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>; clock-names = "ref", "bus_early", "suspend"; @@ -701,8 +701,8 @@ compatible = "socionext,uniphier-dwc3", "snps,dwc3"; status = "disabled"; reg = <0x65c00000 0xcd00>; - interrupt-names = "host", "peripheral"; - interrupts = <0 137 4>, <0 138 4>; + interrupt-names = "dwc_usb3"; + interrupts = <0 137 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>; clock-names = "ref", "bus_early", "suspend"; diff --git a/dts/src/arm64/sprd/sc9836.dtsi b/dts/src/arm64/sprd/sc9836.dtsi index 231436be0e..8bb8a70966 100644 --- a/dts/src/arm64/sprd/sc9836.dtsi +++ b/dts/src/arm64/sprd/sc9836.dtsi @@ -207,11 +207,11 @@ }; psci { - compatible = "arm,psci"; - method = "smc"; - cpu_on = <0xc4000003>; - cpu_off = <0x84000002>; - cpu_suspend = <0xc4000001>; + compatible = "arm,psci"; + method = "smc"; + cpu_on = <0xc4000003>; + cpu_off = <0x84000002>; + cpu_suspend = <0xc4000001>; }; timer { diff --git a/dts/src/arm64/sprd/sc9863a.dtsi b/dts/src/arm64/sprd/sc9863a.dtsi index 8cf4a65759..22d81ace74 100644 --- a/dts/src/arm64/sprd/sc9863a.dtsi +++ b/dts/src/arm64/sprd/sc9863a.dtsi @@ -552,7 +552,7 @@ ranges; sdio0: sdio@20300000 { - compatible = "sprd,sdhci-r11"; + compatible = "sprd,sdhci-r11"; reg = <0 0x20300000 0 0x1000>; interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; @@ -568,7 +568,7 @@ }; sdio3: sdio@20600000 { - compatible = "sprd,sdhci-r11"; + compatible = "sprd,sdhci-r11"; reg = <0 0x20600000 0 0x1000>; interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; diff --git a/dts/src/arm64/sprd/whale2.dtsi b/dts/src/arm64/sprd/whale2.dtsi index 89d91abbd5..fece49704b 100644 --- a/dts/src/arm64/sprd/whale2.dtsi +++ b/dts/src/arm64/sprd/whale2.dtsi @@ -134,7 +134,7 @@ }; sdio3: sdio@50430000 { - compatible = "sprd,sdhci-r11"; + compatible = "sprd,sdhci-r11"; reg = <0 0x50430000 0 0x1000>; interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; diff --git a/dts/src/arm64/tesla/fsd-evb.dts b/dts/src/arm64/tesla/fsd-evb.dts index 5af560c1b5..1db6ddf03f 100644 --- a/dts/src/arm64/tesla/fsd-evb.dts +++ b/dts/src/arm64/tesla/fsd-evb.dts @@ -37,3 +37,7 @@ &serial_0 { status = "okay"; }; + +&ufs { + status = "okay"; +}; diff --git a/dts/src/arm64/tesla/fsd-pinctrl.dtsi b/dts/src/arm64/tesla/fsd-pinctrl.dtsi index d4d0cb0057..d0abb9aa0e 100644 --- a/dts/src/arm64/tesla/fsd-pinctrl.dtsi +++ b/dts/src/arm64/tesla/fsd-pinctrl.dtsi @@ -8,7 +8,7 @@ * https://www.tesla.com */ -#include <dt-bindings/pinctrl/samsung.h> +#include "fsd-pinctrl.h" &pinctrl_fsys0 { gpf0: gpf0-gpio-bank { @@ -50,6 +50,20 @@ interrupt-controller; #interrupt-cells = <2>; }; + + ufs_rst_n: ufs-rst-n-pins { + samsung,pins = "gpf5-0"; + samsung,pin-function = <FSD_PIN_FUNC_2>; + samsung,pin-pud = <FSD_PIN_PULL_NONE>; + samsung,pin-drv = <FSD_PIN_DRV_LV2>; + }; + + ufs_refclk_out: ufs-refclk-out-pins { + samsung,pins = "gpf5-1"; + samsung,pin-function = <FSD_PIN_FUNC_2>; + samsung,pin-pud = <FSD_PIN_PULL_NONE>; + samsung,pin-drv = <FSD_PIN_DRV_LV2>; + }; }; &pinctrl_peric { @@ -223,107 +237,107 @@ pwm0_out: pwm0-out-pins { samsung,pins = "gpb6-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV2>; + samsung,pin-function = <FSD_PIN_FUNC_2>; + samsung,pin-pud = <FSD_PIN_PULL_UP>; + samsung,pin-drv = <FSD_PIN_DRV_LV2>; }; pwm1_out: pwm1-out-pins { samsung,pins = "gpb6-5"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV2>; + samsung,pin-function = <FSD_PIN_FUNC_2>; + samsung,pin-pud = <FSD_PIN_PULL_UP>; + samsung,pin-drv = <FSD_PIN_DRV_LV2>; }; hs_i2c0_bus: hs-i2c0-bus-pins { samsung,pins = "gpb0-0", "gpb0-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <FSD_PIN_FUNC_2>; + samsung,pin-pud = <FSD_PIN_PULL_UP>; + samsung,pin-drv = <FSD_PIN_DRV_LV1>; }; hs_i2c1_bus: hs-i2c1-bus-pins { samsung,pins = "gpb0-2", "gpb0-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <FSD_PIN_FUNC_2>; + samsung,pin-pud = <FSD_PIN_PULL_UP>; + samsung,pin-drv = <FSD_PIN_DRV_LV1>; }; hs_i2c2_bus: hs-i2c2-bus-pins { samsung,pins = "gpb0-4", "gpb0-5"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <FSD_PIN_FUNC_2>; + samsung,pin-pud = <FSD_PIN_PULL_UP>; + samsung,pin-drv = <FSD_PIN_DRV_LV1>; }; hs_i2c3_bus: hs-i2c3-bus-pins { samsung,pins = "gpb0-6", "gpb0-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <FSD_PIN_FUNC_2>; + samsung,pin-pud = <FSD_PIN_PULL_UP>; + samsung,pin-drv = <FSD_PIN_DRV_LV1>; }; hs_i2c4_bus: hs-i2c4-bus-pins { samsung,pins = "gpb1-0", "gpb1-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <FSD_PIN_FUNC_2>; + samsung,pin-pud = <FSD_PIN_PULL_UP>; + samsung,pin-drv = <FSD_PIN_DRV_LV1>; }; hs_i2c5_bus: hs-i2c5-bus-pins { samsung,pins = "gpb1-2", "gpb1-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <FSD_PIN_FUNC_2>; + samsung,pin-pud = <FSD_PIN_PULL_UP>; + samsung,pin-drv = <FSD_PIN_DRV_LV1>; }; hs_i2c6_bus: hs-i2c6-bus-pins { samsung,pins = "gpb1-4", "gpb1-5"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <FSD_PIN_FUNC_2>; + samsung,pin-pud = <FSD_PIN_PULL_UP>; + samsung,pin-drv = <FSD_PIN_DRV_LV1>; }; hs_i2c7_bus: hs-i2c7-bus-pins { samsung,pins = "gpb1-6", "gpb1-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <FSD_PIN_FUNC_2>; + samsung,pin-pud = <FSD_PIN_PULL_UP>; + samsung,pin-drv = <FSD_PIN_DRV_LV1>; }; uart0_data: uart0-data-pins { samsung,pins = "gpb7-0", "gpb7-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <FSD_PIN_FUNC_2>; + samsung,pin-pud = <FSD_PIN_PULL_NONE>; + samsung,pin-drv = <FSD_PIN_DRV_LV1>; }; uart1_data: uart1-data-pins { samsung,pins = "gpb7-4", "gpb7-5"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <FSD_PIN_FUNC_2>; + samsung,pin-pud = <FSD_PIN_PULL_NONE>; + samsung,pin-drv = <FSD_PIN_DRV_LV1>; }; spi0_bus: spi0-bus-pins { samsung,pins = "gpb4-0", "gpb4-2", "gpb4-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <FSD_PIN_FUNC_2>; + samsung,pin-pud = <FSD_PIN_PULL_UP>; + samsung,pin-drv = <FSD_PIN_DRV_LV1>; }; spi1_bus: spi1-bus-pins { samsung,pins = "gpb4-4", "gpb4-6", "gpb4-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <FSD_PIN_FUNC_2>; + samsung,pin-pud = <FSD_PIN_PULL_UP>; + samsung,pin-drv = <FSD_PIN_DRV_LV1>; }; spi2_bus: spi2-bus-pins { samsung,pins = "gpb5-0", "gpb5-2", "gpb5-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <FSD_PIN_FUNC_2>; + samsung,pin-pud = <FSD_PIN_PULL_UP>; + samsung,pin-drv = <FSD_PIN_DRV_LV1>; }; }; diff --git a/dts/src/arm64/tesla/fsd-pinctrl.h b/dts/src/arm64/tesla/fsd-pinctrl.h new file mode 100644 index 0000000000..6ffbda3624 --- /dev/null +++ b/dts/src/arm64/tesla/fsd-pinctrl.h @@ -0,0 +1,33 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Tesla FSD DTS pinctrl constants + * + * Copyright (c) 2016 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Copyright (c) 2022 Linaro Ltd + * Author: Krzysztof Kozlowski <krzk@kernel.org> + */ + +#ifndef __DTS_ARM64_TESLA_FSD_PINCTRL_H__ +#define __DTS_ARM64_TESLA_FSD_PINCTRL_H__ + +#define FSD_PIN_PULL_NONE 0 +#define FSD_PIN_PULL_DOWN 1 +#define FSD_PIN_PULL_UP 3 + +#define FSD_PIN_DRV_LV1 0 +#define FSD_PIN_DRV_LV2 2 +#define FSD_PIN_DRV_LV3 1 +#define FSD_PIN_DRV_LV4 3 + +#define FSD_PIN_FUNC_INPUT 0 +#define FSD_PIN_FUNC_OUTPUT 1 +#define FSD_PIN_FUNC_2 2 +#define FSD_PIN_FUNC_3 3 +#define FSD_PIN_FUNC_4 4 +#define FSD_PIN_FUNC_5 5 +#define FSD_PIN_FUNC_6 6 +#define FSD_PIN_FUNC_EINT 0xf +#define FSD_PIN_FUNC_F FSD_PIN_FUNC_EINT + +#endif /* __DTS_ARM64_TESLA_FSD_PINCTRL_H__ */ diff --git a/dts/src/arm64/tesla/fsd.dtsi b/dts/src/arm64/tesla/fsd.dtsi index af39655331..f35bc5a288 100644 --- a/dts/src/arm64/tesla/fsd.dtsi +++ b/dts/src/arm64/tesla/fsd.dtsi @@ -93,6 +93,13 @@ enable-method = "psci"; clock-frequency = <2400000000>; cpu-idle-states = <&CPU_SLEEP>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&cpucl_l2>; }; cpucl0_1: cpu@1 { @@ -102,6 +109,13 @@ enable-method = "psci"; clock-frequency = <2400000000>; cpu-idle-states = <&CPU_SLEEP>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&cpucl_l2>; }; cpucl0_2: cpu@2 { @@ -111,6 +125,13 @@ enable-method = "psci"; clock-frequency = <2400000000>; cpu-idle-states = <&CPU_SLEEP>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&cpucl_l2>; }; cpucl0_3: cpu@3 { @@ -119,6 +140,13 @@ reg = <0x0 0x003>; enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&cpucl_l2>; }; /* Cluster 1 */ @@ -129,6 +157,13 @@ enable-method = "psci"; clock-frequency = <2400000000>; cpu-idle-states = <&CPU_SLEEP>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&cpucl_l2>; }; cpucl1_1: cpu@101 { @@ -138,6 +173,13 @@ enable-method = "psci"; clock-frequency = <2400000000>; cpu-idle-states = <&CPU_SLEEP>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&cpucl_l2>; }; cpucl1_2: cpu@102 { @@ -147,6 +189,13 @@ enable-method = "psci"; clock-frequency = <2400000000>; cpu-idle-states = <&CPU_SLEEP>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&cpucl_l2>; }; cpucl1_3: cpu@103 { @@ -156,6 +205,13 @@ enable-method = "psci"; clock-frequency = <2400000000>; cpu-idle-states = <&CPU_SLEEP>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&cpucl_l2>; }; /* Cluster 2 */ @@ -166,6 +222,13 @@ enable-method = "psci"; clock-frequency = <2400000000>; cpu-idle-states = <&CPU_SLEEP>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&cpucl_l2>; }; cpucl2_1: cpu@201 { @@ -175,6 +238,13 @@ enable-method = "psci"; clock-frequency = <2400000000>; cpu-idle-states = <&CPU_SLEEP>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&cpucl_l2>; }; cpucl2_2: cpu@202 { @@ -184,6 +254,13 @@ enable-method = "psci"; clock-frequency = <2400000000>; cpu-idle-states = <&CPU_SLEEP>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&cpucl_l2>; }; cpucl2_3: cpu@203 { @@ -193,6 +270,20 @@ enable-method = "psci"; clock-frequency = <2400000000>; cpu-idle-states = <&CPU_SLEEP>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&cpucl_l2>; + }; + + cpucl_l2: l2-cache0 { + compatible = "cache"; + cache-size = <0x400000>; + cache-line-size = <64>; + cache-sets = <4096>; }; idle-states { @@ -740,6 +831,35 @@ clocks = <&fin_pll>, <&clock_imem IMEM_MCT_PCLK>; clock-names = "fin_pll", "mct"; }; + + ufs: ufs@15120000 { + compatible = "tesla,fsd-ufs"; + reg = <0x0 0x15120000 0x0 0x200>, /* 0: HCI standard */ + <0x0 0x15121100 0x0 0x200>, /* 1: Vendor specified */ + <0x0 0x15110000 0x0 0x8000>, /* 2: UNIPRO */ + <0x0 0x15130000 0x0 0x100>; /* 3: UFS protector */ + reg-names = "hci", "vs_hci", "unipro", "ufsp"; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock_fsys0 UFS0_TOP0_HCLK_BUS>, + <&clock_fsys0 UFS0_TOP0_CLK_UNIPRO>; + clock-names = "core_clk", "sclk_unipro_main"; + freq-table-hz = <0 0>, <0 0>; + pinctrl-names = "default"; + pinctrl-0 = <&ufs_rst_n &ufs_refclk_out>; + phys = <&ufs_phy>; + phy-names = "ufs-phy"; + status = "disabled"; + }; + + ufs_phy: ufs-phy@15124000 { + compatible = "tesla,fsd-ufs-phy"; + reg = <0x0 0x15124000 0x0 0x800>; + reg-names = "phy-pma"; + samsung,pmu-syscon = <&pmu_system_controller>; + #phy-cells = <0>; + clocks = <&clock_fsys0 UFS0_MPHY_REFCLK_IXTAL26>; + clock-names = "ref_clk"; + }; }; }; diff --git a/dts/src/arm64/ti/k3-am62-main.dtsi b/dts/src/arm64/ti/k3-am62-main.dtsi index d08abad0bc..12ab7548dc 100644 --- a/dts/src/arm64/ti/k3-am62-main.dtsi +++ b/dts/src/arm64/ti/k3-am62-main.dtsi @@ -144,8 +144,8 @@ compatible = "ti,k2g-sci"; ti,host-id = <12>; mbox-names = "rx", "tx"; - mboxes= <&secure_proxy_main 12>, - <&secure_proxy_main 13>; + mboxes = <&secure_proxy_main 12>, + <&secure_proxy_main 13>; reg-names = "debug_messages"; reg = <0x00 0x44043000 0x00 0xfe0>; @@ -165,6 +165,19 @@ }; }; + crypto: crypto@40900000 { + compatible = "ti,am62-sa3ul"; + reg = <0x00 0x40900000 0x00 0x1200>; + power-domains = <&k3_pds 70 TI_SCI_PD_SHARED>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x40900000 0x00 0x40900000 0x00 0x30000>; + + dmas = <&main_pktdma 0xf501 0>, <&main_pktdma 0x7506 0>, + <&main_pktdma 0x7507 0>; + dma-names = "tx", "rx1", "rx2"; + }; + main_pmx0: pinctrl@f4000 { compatible = "pinctrl-single"; reg = <0x00 0xf4000 0x00 0x2ac>; diff --git a/dts/src/arm64/ti/k3-am625-sk.dts b/dts/src/arm64/ti/k3-am625-sk.dts index 39fb1d7630..9b4dbae9d4 100644 --- a/dts/src/arm64/ti/k3-am625-sk.dts +++ b/dts/src/arm64/ti/k3-am625-sk.dts @@ -13,7 +13,7 @@ #include "k3-am625.dtsi" / { - compatible = "ti,am625-sk", "ti,am625"; + compatible = "ti,am625-sk", "ti,am625"; model = "Texas Instruments AM625 SK"; aliases { @@ -43,6 +43,15 @@ #size-cells = <2>; ranges; + ramoops@9ca00000 { + compatible = "ramoops"; + reg = <0x00 0x9ca00000 0x00 0x00100000>; + record-size = <0x8000>; + console-size = <0x8000>; + ftrace-size = <0x00>; + pmsg-size = <0x8000>; + }; + secure_tfa_ddr: tfa@9e780000 { reg = <0x00 0x9e780000 0x00 0x80000>; alignment = <0x1000>; diff --git a/dts/src/arm64/ti/k3-am64-main.dtsi b/dts/src/arm64/ti/k3-am64-main.dtsi index cdb530597c..ada00575f0 100644 --- a/dts/src/arm64/ti/k3-am64-main.dtsi +++ b/dts/src/arm64/ti/k3-am64-main.dtsi @@ -174,7 +174,7 @@ compatible = "ti,k2g-sci"; ti,host-id = <12>; mbox-names = "rx", "tx"; - mboxes= <&secure_proxy_main 12>, + mboxes = <&secure_proxy_main 12>, <&secure_proxy_main 13>; reg-names = "debug_messages"; reg = <0x00 0x44043000 0x00 0xfe0>; @@ -1301,7 +1301,7 @@ <0x00 0x20718000 0x00 0x8000>; reg-names = "m_can", "message_ram"; power-domains = <&k3_pds 99 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 99 5>, <&k3_clks 99 0>; + clocks = <&k3_clks 99 5>, <&k3_clks 99 0>; clock-names = "hclk", "cclk"; interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; diff --git a/dts/src/arm64/ti/k3-am642-evm.dts b/dts/src/arm64/ti/k3-am642-evm.dts index 8e7893e58b..ad150c7046 100644 --- a/dts/src/arm64/ti/k3-am642-evm.dts +++ b/dts/src/arm64/ti/k3-am642-evm.dts @@ -13,7 +13,7 @@ #include "k3-am642.dtsi" / { - compatible = "ti,am642-evm", "ti,am642"; + compatible = "ti,am642-evm", "ti,am642"; model = "Texas Instruments AM642 EVM"; chosen { diff --git a/dts/src/arm64/ti/k3-am642-sk.dts b/dts/src/arm64/ti/k3-am642-sk.dts index 59f506cbd2..2620469a75 100644 --- a/dts/src/arm64/ti/k3-am642-sk.dts +++ b/dts/src/arm64/ti/k3-am642-sk.dts @@ -12,7 +12,7 @@ #include "k3-am642.dtsi" / { - compatible = "ti,am642-sk", "ti,am642"; + compatible = "ti,am642-sk", "ti,am642"; model = "Texas Instruments AM642 SK"; chosen { @@ -166,6 +166,15 @@ >; }; + main_uart0_pins_default: main-uart0-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x0238, PIN_INPUT, 0) /* (B16) UART0_CTSn */ + AM64X_IOPAD(0x023c, PIN_OUTPUT, 0) /* (A16) UART0_RTSn */ + AM64X_IOPAD(0x0230, PIN_INPUT, 0) /* (D15) UART0_RXD */ + AM64X_IOPAD(0x0234, PIN_OUTPUT, 0) /* (C16) UART0_TXD */ + >; + }; + main_usb0_pins_default: main-usb0-pins-default { pinctrl-single,pins = < AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */ @@ -268,6 +277,11 @@ status = "disabled"; }; +&main_uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_uart0_pins_default>; +}; + &main_uart1 { /* main_uart1 is reserved for firmware usage */ status = "reserved"; diff --git a/dts/src/arm64/ti/k3-am65-iot2050-common.dtsi b/dts/src/arm64/ti/k3-am65-iot2050-common.dtsi index 6e41f2fa04..32b7972375 100644 --- a/dts/src/arm64/ti/k3-am65-iot2050-common.dtsi +++ b/dts/src/arm64/ti/k3-am65-iot2050-common.dtsi @@ -425,7 +425,7 @@ psu: regulator@60 { compatible = "ti,tps62363"; - reg = <0x60>; + reg = <0x60>; regulator-name = "tps62363-vout"; regulator-min-microvolt = <500000>; regulator-max-microvolt = <1500000>; @@ -574,7 +574,7 @@ pinctrl-0 = <&mcu_spi0_pins_default>; #address-cells = <1>; - #size-cells= <0>; + #size-cells = <0>; ti,pindir-d0-out-d1-in; }; diff --git a/dts/src/arm64/ti/k3-am65-main.dtsi b/dts/src/arm64/ti/k3-am65-main.dtsi index e749343acc..8919fede3c 100644 --- a/dts/src/arm64/ti/k3-am65-main.dtsi +++ b/dts/src/arm64/ti/k3-am65-main.dtsi @@ -690,7 +690,7 @@ pcie0_rc: pcie@5500000 { compatible = "ti,am654-pcie-rc"; - reg = <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x2000>, <0x0 0x5506000 0x0 0x1000>; + reg = <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x2000>, <0x0 0x5506000 0x0 0x1000>; reg-names = "app", "dbics", "config", "atu"; power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>; #address-cells = <3>; @@ -710,7 +710,7 @@ pcie0_ep: pcie-ep@5500000 { compatible = "ti,am654-pcie-ep"; - reg = <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x8000000>, <0x0 0x5506000 0x0 0x1000>; + reg = <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x8000000>, <0x0 0x5506000 0x0 0x1000>; reg-names = "app", "dbics", "addr_space", "atu"; power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>; ti,syscon-pcie-mode = <&pcie0_mode>; @@ -723,7 +723,7 @@ pcie1_rc: pcie@5600000 { compatible = "ti,am654-pcie-rc"; - reg = <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x2000>, <0x0 0x5606000 0x0 0x1000>; + reg = <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x2000>, <0x0 0x5606000 0x0 0x1000>; reg-names = "app", "dbics", "config", "atu"; power-domains = <&k3_pds 121 TI_SCI_PD_EXCLUSIVE>; #address-cells = <3>; @@ -743,7 +743,7 @@ pcie1_ep: pcie-ep@5600000 { compatible = "ti,am654-pcie-ep"; - reg = <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x4000000>, <0x0 0x5606000 0x0 0x1000>; + reg = <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x4000000>, <0x0 0x5606000 0x0 0x1000>; reg-names = "app", "dbics", "addr_space", "atu"; power-domains = <&k3_pds 121 TI_SCI_PD_EXCLUSIVE>; ti,syscon-pcie-mode = <&pcie1_mode>; @@ -843,9 +843,9 @@ power-domains = <&k3_pds 67 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 67 1>, - <&k3_clks 216 1>, - <&k3_clks 67 2>; + clocks = <&k3_clks 67 1>, + <&k3_clks 216 1>, + <&k3_clks 67 2>; clock-names = "fck", "vp1", "vp2"; /* diff --git a/dts/src/arm64/ti/k3-am65-wakeup.dtsi b/dts/src/arm64/ti/k3-am65-wakeup.dtsi index 9c69d0917f..fa11d71420 100644 --- a/dts/src/arm64/ti/k3-am65-wakeup.dtsi +++ b/dts/src/arm64/ti/k3-am65-wakeup.dtsi @@ -12,8 +12,8 @@ mbox-names = "rx", "tx"; - mboxes= <&secure_proxy_main 11>, - <&secure_proxy_main 13>; + mboxes = <&secure_proxy_main 11>, + <&secure_proxy_main 13>; reg-names = "debug_messages"; reg = <0x44083000 0x1000>; diff --git a/dts/src/arm64/ti/k3-am654-base-board.dts b/dts/src/arm64/ti/k3-am654-base-board.dts index 57497cb1ed..5850582dd4 100644 --- a/dts/src/arm64/ti/k3-am654-base-board.dts +++ b/dts/src/arm64/ti/k3-am654-base-board.dts @@ -10,7 +10,7 @@ #include <dt-bindings/net/ti-dp83867.h> / { - compatible = "ti,am654-evm", "ti,am654"; + compatible = "ti,am654-evm", "ti,am654"; model = "Texas Instruments AM654 Base Board"; chosen { @@ -73,13 +73,13 @@ pinctrl-names = "default"; pinctrl-0 = <&push_button_pins_default>; - sw5 { + switch-5 { label = "GPIO Key USER1"; linux,code = <BTN_0>; gpios = <&wkup_gpio0 24 GPIO_ACTIVE_LOW>; }; - sw6 { + switch-6 { label = "GPIO Key USER2"; linux,code = <BTN_1>; gpios = <&wkup_gpio0 27 GPIO_ACTIVE_LOW>; @@ -330,7 +330,7 @@ pinctrl-names = "default"; pinctrl-0 = <&main_spi0_pins_default>; #address-cells = <1>; - #size-cells= <0>; + #size-cells = <0>; ti,pindir-d0-out-d1-in; flash@0 { diff --git a/dts/src/arm64/ti/k3-j7200-mcu-wakeup.dtsi b/dts/src/arm64/ti/k3-j7200-mcu-wakeup.dtsi index 1044ec6c4b..ff13bbeed3 100644 --- a/dts/src/arm64/ti/k3-j7200-mcu-wakeup.dtsi +++ b/dts/src/arm64/ti/k3-j7200-mcu-wakeup.dtsi @@ -12,8 +12,8 @@ mbox-names = "rx", "tx"; - mboxes= <&secure_proxy_main 11>, - <&secure_proxy_main 13>; + mboxes = <&secure_proxy_main 11>, + <&secure_proxy_main 13>; reg-names = "debug_messages"; reg = <0x00 0x44083000 0x00 0x1000>; diff --git a/dts/src/arm64/ti/k3-j721e-common-proc-board.dts b/dts/src/arm64/ti/k3-j721e-common-proc-board.dts index 2bc26a2964..b1691ac344 100644 --- a/dts/src/arm64/ti/k3-j721e-common-proc-board.dts +++ b/dts/src/arm64/ti/k3-j721e-common-proc-board.dts @@ -26,13 +26,13 @@ pinctrl-names = "default"; pinctrl-0 = <&sw10_button_pins_default &sw11_button_pins_default>; - sw10: sw10 { + sw10: switch-10 { label = "GPIO Key USER1"; linux,code = <BTN_0>; gpios = <&main_gpio0 0 GPIO_ACTIVE_LOW>; }; - sw11: sw11 { + sw11: switch-11 { label = "GPIO Key USER2"; linux,code = <BTN_1>; gpios = <&wkup_gpio0 7 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm64/ti/k3-j721e-mcu-wakeup.dtsi b/dts/src/arm64/ti/k3-j721e-mcu-wakeup.dtsi index b4972dfb7d..df08724bbf 100644 --- a/dts/src/arm64/ti/k3-j721e-mcu-wakeup.dtsi +++ b/dts/src/arm64/ti/k3-j721e-mcu-wakeup.dtsi @@ -12,8 +12,8 @@ mbox-names = "rx", "tx"; - mboxes= <&secure_proxy_main 11>, - <&secure_proxy_main 13>; + mboxes = <&secure_proxy_main 11>, + <&secure_proxy_main 13>; reg-names = "debug_messages"; reg = <0x00 0x44083000 0x0 0x1000>; diff --git a/dts/src/arm64/ti/k3-j721s2-main.dtsi b/dts/src/arm64/ti/k3-j721s2-main.dtsi index 19966f72c5..34e7d577ae 100644 --- a/dts/src/arm64/ti/k3-j721s2-main.dtsi +++ b/dts/src/arm64/ti/k3-j721s2-main.dtsi @@ -320,7 +320,7 @@ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&k3_pds 98 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 98 7>, <&k3_clks 98 1>; - clock-names = "clk_ahb", "clk_xin"; + clock-names = "clk_ahb", "clk_xin"; assigned-clocks = <&k3_clks 98 1>; assigned-clock-parents = <&k3_clks 98 2>; bus-width = <8>; @@ -347,7 +347,7 @@ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&k3_pds 99 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 99 8>, <&k3_clks 99 1>; - clock-names = "clk_ahb", "clk_xin"; + clock-names = "clk_ahb", "clk_xin"; assigned-clocks = <&k3_clks 99 1>; assigned-clock-parents = <&k3_clks 99 2>; bus-width = <4>; diff --git a/dts/src/arm64/ti/k3-j721s2-mcu-wakeup.dtsi b/dts/src/arm64/ti/k3-j721s2-mcu-wakeup.dtsi index 6c5c02edb3..4d1bfabd13 100644 --- a/dts/src/arm64/ti/k3-j721s2-mcu-wakeup.dtsi +++ b/dts/src/arm64/ti/k3-j721s2-mcu-wakeup.dtsi @@ -12,8 +12,8 @@ mbox-names = "rx", "tx"; - mboxes= <&secure_proxy_main 11>, - <&secure_proxy_main 13>; + mboxes = <&secure_proxy_main 11>, + <&secure_proxy_main 13>; reg-names = "debug_messages"; reg = <0x00 0x44083000 0x00 0x1000>; diff --git a/dts/src/arm64/xilinx/zynqmp-clk-ccf.dtsi b/dts/src/arm64/xilinx/zynqmp-clk-ccf.dtsi index 8493dd7d5f..e172fa05c9 100644 --- a/dts/src/arm64/xilinx/zynqmp-clk-ccf.dtsi +++ b/dts/src/arm64/xilinx/zynqmp-clk-ccf.dtsi @@ -239,6 +239,10 @@ clocks = <&zynqmp_clk LPD_WDT>; }; +&xilinx_ams { + clocks = <&zynqmp_clk AMS_REF>; +}; + &zynqmp_dpdma { clocks = <&zynqmp_clk DPDMA_REF>; }; diff --git a/dts/src/arm64/xilinx/zynqmp-sm-k26-revA.dts b/dts/src/arm64/xilinx/zynqmp-sm-k26-revA.dts index 550b389153..20e83ca47b 100644 --- a/dts/src/arm64/xilinx/zynqmp-sm-k26-revA.dts +++ b/dts/src/arm64/xilinx/zynqmp-sm-k26-revA.dts @@ -52,7 +52,7 @@ gpio-keys { compatible = "gpio-keys"; autorepeat; - fwuen { + key-fwuen { label = "fwuen"; gpios = <&gpio 12 GPIO_ACTIVE_LOW>; }; @@ -285,5 +285,5 @@ "", "", "", "", "", /* 155 - 159 */ "", "", "", "", "", /* 160 - 164 */ "", "", "", "", "", /* 165 - 169 */ - "", "", "", ""; /* 170 - 174 */ + "", "", "", ""; /* 170 - 173 */ }; diff --git a/dts/src/arm64/xilinx/zynqmp-zcu100-revC.dts b/dts/src/arm64/xilinx/zynqmp-zcu100-revC.dts index f6aad4159c..d61a297a20 100644 --- a/dts/src/arm64/xilinx/zynqmp-zcu100-revC.dts +++ b/dts/src/arm64/xilinx/zynqmp-zcu100-revC.dts @@ -49,7 +49,7 @@ gpio-keys { compatible = "gpio-keys"; autorepeat; - sw4 { + switch-4 { label = "sw4"; gpios = <&gpio 23 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; diff --git a/dts/src/arm64/xilinx/zynqmp-zcu102-revA.dts b/dts/src/arm64/xilinx/zynqmp-zcu102-revA.dts index 7b9a88b125..5fd6b70a15 100644 --- a/dts/src/arm64/xilinx/zynqmp-zcu102-revA.dts +++ b/dts/src/arm64/xilinx/zynqmp-zcu102-revA.dts @@ -47,7 +47,7 @@ gpio-keys { compatible = "gpio-keys"; autorepeat; - sw19 { + switch-19 { label = "sw19"; gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; linux,code = <KEY_DOWN>; diff --git a/dts/src/arm64/xilinx/zynqmp-zcu106-revA.dts b/dts/src/arm64/xilinx/zynqmp-zcu106-revA.dts index 20b7c75bb1..e2dd72fe33 100644 --- a/dts/src/arm64/xilinx/zynqmp-zcu106-revA.dts +++ b/dts/src/arm64/xilinx/zynqmp-zcu106-revA.dts @@ -47,7 +47,7 @@ gpio-keys { compatible = "gpio-keys"; autorepeat; - sw19 { + switch-19 { label = "sw19"; gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; linux,code = <KEY_DOWN>; diff --git a/dts/src/arm64/xilinx/zynqmp-zcu111-revA.dts b/dts/src/arm64/xilinx/zynqmp-zcu111-revA.dts index e36df6adbe..d685d8fbc3 100644 --- a/dts/src/arm64/xilinx/zynqmp-zcu111-revA.dts +++ b/dts/src/arm64/xilinx/zynqmp-zcu111-revA.dts @@ -47,7 +47,7 @@ gpio-keys { compatible = "gpio-keys"; autorepeat; - sw19 { + switch-19 { label = "sw19"; gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; linux,code = <KEY_DOWN>; diff --git a/dts/src/arm64/xilinx/zynqmp.dtsi b/dts/src/arm64/xilinx/zynqmp.dtsi index c715a18368..a549265e55 100644 --- a/dts/src/arm64/xilinx/zynqmp.dtsi +++ b/dts/src/arm64/xilinx/zynqmp.dtsi @@ -874,6 +874,32 @@ timeout-sec = <10>; }; + xilinx_ams: ams@ffa50000 { + compatible = "xlnx,zynqmp-ams"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 56 4>; + reg = <0x0 0xffa50000 0x0 0x800>; + #address-cells = <1>; + #size-cells = <1>; + #io-channel-cells = <1>; + ranges = <0 0 0xffa50800 0x800>; + + ams_ps: ams_ps@0 { + compatible = "xlnx,zynqmp-ams-ps"; + status = "disabled"; + reg = <0x0 0x400>; + }; + + ams_pl: ams_pl@400 { + compatible = "xlnx,zynqmp-ams-pl"; + status = "disabled"; + reg = <0x400 0x400>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + zynqmp_dpdma: dma-controller@fd4c0000 { compatible = "xlnx,zynqmp-dpdma"; status = "disabled"; diff --git a/dts/src/mips/img/pistachio_marduk.dts b/dts/src/mips/img/pistachio_marduk.dts index a8708783f0..a8da2f992b 100644 --- a/dts/src/mips/img/pistachio_marduk.dts +++ b/dts/src/mips/img/pistachio_marduk.dts @@ -59,12 +59,12 @@ keys { compatible = "gpio-keys"; - button@1 { + button-1 { label = "Button 1"; linux,code = <0x101>; /* BTN_1 */ gpios = <&gpio3 6 GPIO_ACTIVE_LOW>; }; - button@2 { + button-2 { label = "Button 2"; linux,code = <0x102>; /* BTN_2 */ gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; diff --git a/dts/src/mips/ingenic/ci20.dts b/dts/src/mips/ingenic/ci20.dts index ab6e3dc0bc..37c46720c7 100644 --- a/dts/src/mips/ingenic/ci20.dts +++ b/dts/src/mips/ingenic/ci20.dts @@ -31,7 +31,7 @@ gpio-keys { compatible = "gpio-keys"; - sw1 { + switch { label = "ci20:sw1"; linux,code = <KEY_F13>; gpios = <&gpd 17 GPIO_ACTIVE_HIGH>; diff --git a/dts/src/mips/ingenic/gcw0.dts b/dts/src/mips/ingenic/gcw0.dts index 4abb031841..5d33f26fd2 100644 --- a/dts/src/mips/ingenic/gcw0.dts +++ b/dts/src/mips/ingenic/gcw0.dts @@ -130,89 +130,86 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - autorepeat; - button@0 { + button-0 { label = "D-pad up"; linux,code = <KEY_UP>; linux,can-disable; gpios = <&gpe 21 GPIO_ACTIVE_LOW>; }; - button@1 { + button-1 { label = "D-pad down"; linux,code = <KEY_DOWN>; linux,can-disable; gpios = <&gpe 25 GPIO_ACTIVE_LOW>; }; - button@2 { + button-2 { label = "D-pad left"; linux,code = <KEY_LEFT>; linux,can-disable; gpios = <&gpe 23 GPIO_ACTIVE_LOW>; }; - button@3 { + button-3 { label = "D-pad right"; linux,code = <KEY_RIGHT>; linux,can-disable; gpios = <&gpe 24 GPIO_ACTIVE_LOW>; }; - button@4 { + button-4 { label = "Button A"; linux,code = <KEY_LEFTCTRL>; linux,can-disable; gpios = <&gpe 29 GPIO_ACTIVE_LOW>; }; - button@5 { + button-5 { label = "Button B"; linux,code = <KEY_LEFTALT>; linux,can-disable; gpios = <&gpe 20 GPIO_ACTIVE_LOW>; }; - button@6 { + button-6 { label = "Button Y"; linux,code = <KEY_SPACE>; linux,can-disable; gpios = <&gpe 27 GPIO_ACTIVE_LOW>; }; - button@7 { + button-7 { label = "Button X"; linux,code = <KEY_LEFTSHIFT>; linux,can-disable; gpios = <&gpe 28 GPIO_ACTIVE_LOW>; }; - button@8 { + button-8 { label = "Left shoulder button"; linux,code = <KEY_TAB>; linux,can-disable; gpios = <&gpb 20 GPIO_ACTIVE_LOW>; }; - button@9 { + button-9 { label = "Right shoulder button"; linux,code = <KEY_BACKSPACE>; linux,can-disable; gpios = <&gpe 26 GPIO_ACTIVE_LOW>; }; - button@10 { + button-10 { label = "Start button"; linux,code = <KEY_ENTER>; linux,can-disable; gpios = <&gpb 21 GPIO_ACTIVE_LOW>; }; - button@11 { + button-11 { label = "Select button"; linux,code = <KEY_ESC>; linux,can-disable; @@ -223,7 +220,7 @@ gpios = <&gpd 18 GPIO_ACTIVE_HIGH>; }; - button@12 { + button-12 { label = "Power slider"; linux,code = <KEY_POWER>; linux,can-disable; @@ -231,7 +228,7 @@ wakeup-source; }; - button@13 { + button-13 { label = "Power hold"; linux,code = <KEY_PAUSE>; linux,can-disable; diff --git a/dts/src/mips/ingenic/rs90.dts b/dts/src/mips/ingenic/rs90.dts index 74fee7f013..e8df70dd42 100644 --- a/dts/src/mips/ingenic/rs90.dts +++ b/dts/src/mips/ingenic/rs90.dts @@ -52,53 +52,51 @@ keys@0 { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - key@0 { + key-0 { label = "D-pad up"; linux,code = <KEY_UP>; gpios = <&gpc 10 GPIO_ACTIVE_LOW>; }; - key@1 { + key-1 { label = "D-pad down"; linux,code = <KEY_DOWN>; gpios = <&gpc 11 GPIO_ACTIVE_LOW>; }; - key@2 { + key-2 { label = "D-pad left"; linux,code = <KEY_LEFT>; gpios = <&gpb 31 GPIO_ACTIVE_LOW>; }; - key@3 { + key-3 { label = "D-pad right"; linux,code = <KEY_RIGHT>; gpios = <&gpd 21 GPIO_ACTIVE_LOW>; }; - key@4 { + key-4 { label = "Button A"; linux,code = <KEY_LEFTCTRL>; gpios = <&gpc 31 GPIO_ACTIVE_LOW>; }; - key@5 { + key-5 { label = "Button B"; linux,code = <KEY_LEFTALT>; gpios = <&gpc 30 GPIO_ACTIVE_LOW>; }; - key@6 { + key-6 { label = "Right shoulder button"; linux,code = <KEY_BACKSPACE>; gpios = <&gpc 12 GPIO_ACTIVE_LOW>; debounce-interval = <10>; }; - key@7 { + key-7 { label = "Start button"; linux,code = <KEY_ENTER>; gpios = <&gpd 17 GPIO_ACTIVE_LOW>; diff --git a/dts/src/mips/mscc/ocelot.dtsi b/dts/src/mips/mscc/ocelot.dtsi index cfc219a72b..6bd8a1ad94 100644 --- a/dts/src/mips/mscc/ocelot.dtsi +++ b/dts/src/mips/mscc/ocelot.dtsi @@ -136,13 +136,14 @@ <0x1880000 0x10000>, <0x1040000 0x10000>, <0x1050000 0x10000>, - <0x1060000 0x10000>; + <0x1060000 0x10000>, + <0x1a0 0x1c4>; reg-names = "sys", "rew", "qs", "ptp", "port0", "port1", "port2", "port3", "port4", "port5", "port6", "port7", "port8", "port9", "port10", "qsys", - "ana", "s0", "s1", "s2"; - interrupts = <18 21 22>; - interrupt-names = "ptp_rdy", "xtr", "inj"; + "ana", "s0", "s1", "s2", "fdma"; + interrupts = <18 21 22 16>; + interrupt-names = "ptp_rdy", "xtr", "inj", "fdma"; ethernet-ports { #address-cells = <1>; diff --git a/dts/src/mips/pic32/pic32mzda_sk.dts b/dts/src/mips/pic32/pic32mzda_sk.dts index d7fa5d55db..ab70637bbe 100644 --- a/dts/src/mips/pic32/pic32mzda_sk.dts +++ b/dts/src/mips/pic32/pic32mzda_sk.dts @@ -52,22 +52,19 @@ pinctrl-0 = <&user_buttons_s0>; pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - - button@sw1 { + button-1 { label = "ESC"; linux,code = <1>; gpios = <&gpio1 12 0>; }; - button@sw2 { + button-2 { label = "Home"; linux,code = <102>; gpios = <&gpio1 13 0>; }; - button@sw3 { + button-3 { label = "Menu"; linux,code = <139>; gpios = <&gpio1 14 0>; diff --git a/dts/src/mips/qca/ar9132_tl_wr1043nd_v1.dts b/dts/src/mips/qca/ar9132_tl_wr1043nd_v1.dts index 7fccf63572..f3dff4009a 100644 --- a/dts/src/mips/qca/ar9132_tl_wr1043nd_v1.dts +++ b/dts/src/mips/qca/ar9132_tl_wr1043nd_v1.dts @@ -23,17 +23,15 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - button@0 { + button-0 { label = "reset"; linux,code = <KEY_RESTART>; gpios = <&gpio 3 GPIO_ACTIVE_LOW>; debounce-interval = <60>; }; - button@1 { + button-1 { label = "qss"; linux,code = <KEY_WPS_BUTTON>; gpios = <&gpio 7 GPIO_ACTIVE_LOW>; diff --git a/dts/src/mips/qca/ar9331_dpt_module.dts b/dts/src/mips/qca/ar9331_dpt_module.dts index 7695d326df..c857cd22f7 100644 --- a/dts/src/mips/qca/ar9331_dpt_module.dts +++ b/dts/src/mips/qca/ar9331_dpt_module.dts @@ -33,10 +33,8 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - button@0 { + button-0 { label = "reset"; linux,code = <KEY_RESTART>; gpios = <&gpio 11 GPIO_ACTIVE_LOW>; diff --git a/dts/src/mips/qca/ar9331_dragino_ms14.dts b/dts/src/mips/qca/ar9331_dragino_ms14.dts index d38aa73f1a..40e4c5da0e 100644 --- a/dts/src/mips/qca/ar9331_dragino_ms14.dts +++ b/dts/src/mips/qca/ar9331_dragino_ms14.dts @@ -49,16 +49,14 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - button@0 { + button-0 { label = "jumpstart"; linux,code = <KEY_WPS_BUTTON>; gpios = <&gpio 11 GPIO_ACTIVE_LOW>; }; - button@1 { + button-1 { label = "reset"; linux,code = <KEY_RESTART>; gpios = <&gpio 12 GPIO_ACTIVE_LOW>; diff --git a/dts/src/mips/qca/ar9331_omega.dts b/dts/src/mips/qca/ar9331_omega.dts index 11778abacf..ed184d861d 100644 --- a/dts/src/mips/qca/ar9331_omega.dts +++ b/dts/src/mips/qca/ar9331_omega.dts @@ -31,10 +31,8 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - button@0 { + button-0 { label = "reset"; linux,code = <KEY_RESTART>; gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; diff --git a/dts/src/mips/qca/ar9331_openembed_som9331_board.dts b/dts/src/mips/qca/ar9331_openembed_som9331_board.dts index e6622f8e8c..dc65ebd60b 100644 --- a/dts/src/mips/qca/ar9331_openembed_som9331_board.dts +++ b/dts/src/mips/qca/ar9331_openembed_som9331_board.dts @@ -33,10 +33,8 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - button@0 { + button-0 { label = "reset"; linux,code = <KEY_RESTART>; gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; diff --git a/dts/src/mips/qca/ar9331_tl_mr3020.dts b/dts/src/mips/qca/ar9331_tl_mr3020.dts index c8290d36cf..5f424c2cd7 100644 --- a/dts/src/mips/qca/ar9331_tl_mr3020.dts +++ b/dts/src/mips/qca/ar9331_tl_mr3020.dts @@ -49,22 +49,20 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - button@0 { + button-0 { label = "wps"; linux,code = <KEY_WPS_BUTTON>; gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; }; - button@1 { + button-1 { label = "sw1"; linux,code = <BTN_0>; gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; }; - button@2 { + button-2 { label = "sw2"; linux,code = <BTN_1>; gpios = <&gpio 20 GPIO_ACTIVE_HIGH>; diff --git a/dts/src/mips/ralink/gardena_smart_gateway_mt7688.dts b/dts/src/mips/ralink/gardena_smart_gateway_mt7688.dts index 826e91b840..179558161f 100644 --- a/dts/src/mips/ralink/gardena_smart_gateway_mt7688.dts +++ b/dts/src/mips/ralink/gardena_smart_gateway_mt7688.dts @@ -26,7 +26,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinmux_gpio_gpio>; /* GPIO11 */ - user_btn1 { + button { label = "USER_BTN1"; gpios = <&gpio 11 GPIO_ACTIVE_LOW>; linux,code =<KEY_PROG1> ; diff --git a/dts/src/mips/ralink/mt7621-gnubee-gb-pc1.dts b/dts/src/mips/ralink/mt7621-gnubee-gb-pc1.dts index 37037e4f3c..24eebc5a85 100644 --- a/dts/src/mips/ralink/mt7621-gnubee-gb-pc1.dts +++ b/dts/src/mips/ralink/mt7621-gnubee-gb-pc1.dts @@ -29,7 +29,7 @@ gpio-keys { compatible = "gpio-keys"; - reset { + key-reset { label = "reset"; gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; linux,code = <KEY_RESTART>; diff --git a/dts/src/mips/ralink/mt7621-gnubee-gb-pc2.dts b/dts/src/mips/ralink/mt7621-gnubee-gb-pc2.dts index a6201a119a..34006e6677 100644 --- a/dts/src/mips/ralink/mt7621-gnubee-gb-pc2.dts +++ b/dts/src/mips/ralink/mt7621-gnubee-gb-pc2.dts @@ -29,7 +29,7 @@ gpio-keys { compatible = "gpio-keys"; - reset { + key-reset { label = "reset"; gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; linux,code = <KEY_RESTART>; diff --git a/dts/src/powerpc/fsl/p2020si-post.dtsi b/dts/src/powerpc/fsl/p2020si-post.dtsi index 7a590c92fe..81b9ab2119 100644 --- a/dts/src/powerpc/fsl/p2020si-post.dtsi +++ b/dts/src/powerpc/fsl/p2020si-post.dtsi @@ -48,6 +48,7 @@ bus-range = <0 255>; clock-frequency = <33333333>; interrupts = <26 2 0 0>; + law_trgt_if = <2>; pcie@0 { reg = <0 0 0 0 0>; @@ -76,6 +77,7 @@ bus-range = <0 255>; clock-frequency = <33333333>; interrupts = <25 2 0 0>; + law_trgt_if = <1>; pcie@0 { reg = <0 0 0 0 0>; @@ -105,6 +107,7 @@ bus-range = <0 255>; clock-frequency = <33333333>; interrupts = <24 2 0 0>; + law_trgt_if = <0>; pcie@0 { reg = <0 0 0 0 0>; diff --git a/dts/src/powerpc/turris1x.dts b/dts/src/powerpc/turris1x.dts new file mode 100644 index 0000000000..12e08271e6 --- /dev/null +++ b/dts/src/powerpc/turris1x.dts @@ -0,0 +1,483 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Turris 1.x Device Tree Source + * + * Copyright 2013 - 2022 CZ.NIC z.s.p.o. (http://www.nic.cz/) + * + * Pinout, Schematics and Altium hardware design files are open source + * and available at: https://docs.turris.cz/hw/turris-1x/turris-1x/ + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/leds/common.h> +/include/ "fsl/p2020si-pre.dtsi" + +/ { + model = "Turris 1.x"; + compatible = "cznic,turris1x", "fsl,P2020RDB-PC"; /* fsl,P2020RDB-PC is required for booting Linux */ + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + spi0 = &spi0; + }; + + memory { + device_type = "memory"; + }; + + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x00100000>; + + i2c@3000 { + /* PCA9557PW GPIO controller for boot config */ + gpio-controller@18 { + compatible = "nxp,pca9557"; + label = "bootcfg"; + reg = <0x18>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + + /* STM32F030R8T6 MCU for power control */ + power-control@2a { + /* + * Turris Power Control firmware runs on STM32F0 MCU. + * This firmware is open source and available at: + * https://gitlab.nic.cz/turris/hw/turris_power_control + */ + reg = <0x2a>; + }; + + /* DDR3 SPD/EEPROM PSWP instruction */ + eeprom@32 { + reg = <0x32>; + }; + + /* SA56004ED temperature control */ + temperature-sensor@4c { + compatible = "nxp,sa56004"; + reg = <0x4c>; + interrupt-parent = <&gpio>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>, /* GPIO12 - ALERT pin */ + <13 IRQ_TYPE_LEVEL_LOW>; /* GPIO13 - CRIT pin */ + }; + + /* DDR3 SPD/EEPROM */ + eeprom@52 { + compatible = "atmel,spd"; + reg = <0x52>; + }; + + /* MCP79402-I/ST Protected EEPROM */ + eeprom@57 { + reg = <0x57>; + }; + + /* ATSHA204-TH-DA-T crypto module */ + crypto@64 { + compatible = "atmel,atsha204"; + reg = <0x64>; + }; + + /* IDT6V49205BNLGI clock generator */ + clock-generator@69 { + compatible = "idt,6v49205b"; + reg = <0x69>; + }; + + /* MCP79402-I/ST RTC */ + rtc@6f { + compatible = "microchip,mcp7940x"; + reg = <0x6f>; + interrupt-parent = <&gpio>; + interrupts = <14 0>; /* GPIO14 - MFP pin */ + }; + }; + + /* SPI on connector P1 */ + spi0: spi@7000 { + }; + + gpio: gpio-controller@fc00 { + #interrupt-cells = <2>; + interrupt-controller; + }; + + /* Connected to SMSC USB2412-DZK 2-Port USB 2.0 Hub Controller */ + usb@22000 { + phy_type = "ulpi"; + dr_mode = "host"; + }; + + enet0: ethernet@24000 { + /* Connected to port 6 of QCA8337N-AL3C switch */ + phy-connection-type = "rgmii-id"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + mdio@24520 { + /* KSZ9031RNXCA ethernet phy for WAN port */ + phy: ethernet-phy@7 { + interrupts = <3 1 0 0>; + reg = <0x7>; + }; + + /* QCA8337N-AL3C switch with integrated ethernet PHYs for LAN ports */ + switch@10 { + compatible = "qca,qca8337"; + interrupts = <2 1 0 0>; + reg = <0x10>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu1"; + ethernet = <&enet1>; + phy-mode = "rgmii-id"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "lan5"; + }; + + port@2 { + reg = <2>; + label = "lan4"; + }; + + port@3 { + reg = <3>; + label = "lan3"; + }; + + port@4 { + reg = <4>; + label = "lan2"; + }; + + port@5 { + reg = <5>; + label = "lan1"; + }; + + port@6 { + reg = <6>; + label = "cpu0"; + ethernet = <&enet0>; + phy-mode = "rgmii-id"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + }; + + ptp_clock@24e00 { + fsl,tclk-period = <5>; + fsl,tmr-prsc = <200>; + fsl,tmr-add = <0xcccccccd>; + fsl,tmr-fiper1 = <0x3b9ac9fb>; + fsl,tmr-fiper2 = <0x0001869b>; + fsl,max-adj = <249999999>; + }; + + enet1: ethernet@25000 { + /* Connected to port 0 of QCA8337N-AL3C switch */ + phy-connection-type = "rgmii-id"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + mdio@25520 { + status = "disabled"; + }; + + enet2: ethernet@26000 { + /* Connected to KSZ9031RNXCA ethernet phy (WAN port) */ + label = "wan"; + phy-handle = <&phy>; + phy-connection-type = "rgmii-id"; + }; + + mdio@26520 { + status = "disabled"; + }; + + sdhc@2e000 { + bus-width = <4>; + cd-gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + }; + }; + + lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; + + ranges = <0x0 0x0 0x0 0xef000000 0x01000000>, /* NOR */ + <0x1 0x0 0x0 0xff800000 0x00040000>, /* NAND */ + <0x3 0x0 0x0 0xffa00000 0x00020000>; /* CPLD */ + + /* S29GL128P90TFIR10 NOR */ + nor@0,0 { + compatible = "cfi-flash"; + reg = <0x0 0x0 0x01000000>; + bank-width = <2>; + device-width = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + /* 128 kB for Device Tree Blob */ + reg = <0x00000000 0x00020000>; + label = "dtb"; + }; + + partition@20000 { + /* 1.7 MB for Rescue Linux Kernel Image */ + reg = <0x00020000 0x001a0000>; + label = "rescue-kernel"; + }; + + partition@1c0000 { + /* 1.5 MB for Rescue JFFS2 Root File System */ + reg = <0x001c0000 0x00180000>; + label = "rescue-rootfs"; + }; + + partition@340000 { + /* 11 MB for TAR.XZ Backup with content of NAND Root File System */ + reg = <0x00340000 0x00b00000>; + label = "backup-rootfs"; + }; + + partition@e40000 { + /* 768 kB for Certificates JFFS2 File System */ + reg = <0x00e40000 0x000c0000>; + label = "certificates"; + }; + + /* free unused space 0x00f00000-0x00f20000 */ + + partition@f20000 { + /* 128 kB for U-Boot Environment Variables */ + reg = <0x00f20000 0x00020000>; + label = "u-boot-env"; + }; + + partition@f40000 { + /* 768 kB for U-Boot Bootloader Image */ + reg = <0x00f40000 0x000c0000>; + label = "u-boot"; + }; + }; + }; + + /* MT29F2G08ABAEAWP:E NAND */ + nand@1,0 { + compatible = "fsl,p2020-fcm-nand", "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x00040000>; + nand-ecc-mode = "soft"; + nand-ecc-algo = "bch"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + /* 256 MB for UBI with one volume: UBIFS Root File System */ + reg = <0x00000000 0x10000000>; + label = "rootfs"; + }; + }; + }; + + /* LCMXO1200C-3FTN256C FPGA */ + cpld@3,0 { + /* + * Turris CPLD firmware which runs on this Lattice FPGA, + * is extended version of P1021RDB-PC CPLD v4.1 firmware. + * It is backward compatible with its original version + * and the only extension is support for Turris LEDs. + * Turris CPLD firmware is open source and available at: + * https://gitlab.nic.cz/turris/hw/turris_cpld/-/blob/master/CZ_NIC_Router_CPLD.v + */ + compatible = "cznic,turris1x-cpld", "fsl,p1021rdb-pc-cpld", "simple-bus", "syscon"; + reg = <0x3 0x0 0x30>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3 0x0 0x00020000>; + + /* MAX6370KA+T watchdog */ + watchdog@2 { + /* + * CPLD firmware maps SET0, SET1 and SET2 + * input logic of MAX6370KA+T chip to CPLD + * memory space at byte offset 0x2. WDI + * input logic is outside of the CPLD and + * connected via external GPIO. + */ + compatible = "maxim,max6370"; + reg = <0x02 0x01>; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + }; + + reboot@d { + compatible = "syscon-reboot"; + reg = <0x0d 0x01>; + offset = <0x0d>; + mask = <0x01>; + value = <0x01>; + }; + + led-controller@13 { + /* + * LEDs are controlled by CPLD firmware. + * All five LAN LEDs share common RGB settings + * and so it is not possible to set different + * colors on different LAN ports. + */ + compatible = "cznic,turris1x-leds"; + reg = <0x13 0x1d>; + #address-cells = <1>; + #size-cells = <0>; + + multi-led@0 { + reg = <0x0>; + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_WAN; + }; + + multi-led@1 { + reg = <0x1>; + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_LAN; + function-enumerator = <5>; + }; + + multi-led@2 { + reg = <0x2>; + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_LAN; + function-enumerator = <4>; + }; + + multi-led@3 { + reg = <0x3>; + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_LAN; + function-enumerator = <3>; + }; + + multi-led@4 { + reg = <0x4>; + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_LAN; + function-enumerator = <2>; + }; + + multi-led@5 { + reg = <0x5>; + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_LAN; + function-enumerator = <1>; + }; + + multi-led@6 { + reg = <0x6>; + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_WLAN; + }; + + multi-led@7 { + reg = <0x7>; + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_POWER; + }; + }; + }; + }; + + pci2: pcie@ffe08000 { + /* + * PCIe bus for on-board TUSB7340RKM USB 3.0 xHCI controller. + * This xHCI controller is available only on Turris 1.1 boards. + * Turris 1.0 boards have nothing connected to this PCIe bus, + * so system would see only PCIe Root Port of this PCIe Root + * Complex. TUSB7340RKM xHCI controller has four SuperSpeed + * channels. Channel 0 is connected to the front USB 3.0 port, + * channel 1 (but only USB 2.0 subset) to USB 2.0 pins on mPCIe + * slot 1 (CN5), channels 2 and 3 to connector P600. + * + * P2020 PCIe Root Port uses 1MB of PCIe MEM and xHCI controller + * uses 64kB + 8kB of PCIe MEM. No PCIe IO is used or required. + * So allocate 2MB of PCIe MEM for this PCIe bus. + */ + reg = <0 0xffe08000 0 0x1000>; + ranges = <0x02000000 0x0 0xc0000000 0 0xc0000000 0x0 0x00200000>, /* MEM */ + <0x01000000 0x0 0x00000000 0 0xffc20000 0x0 0x00010000>; /* IO */ + + pcie@0 { + ranges; + }; + }; + + pci1: pcie@ffe09000 { + /* PCIe bus on mPCIe slot 2 (CN6) for expansion mPCIe card */ + reg = <0 0xffe09000 0 0x1000>; + ranges = <0x02000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000>, /* MEM */ + <0x01000000 0x0 0x00000000 0 0xffc10000 0x0 0x00010000>; /* IO */ + + pcie@0 { + ranges; + }; + }; + + pci0: pcie@ffe0a000 { + /* + * PCIe bus on mPCIe slot 1 (CN5) for expansion mPCIe card. + * Turris 1.1 boards have in this mPCIe slot additional USB 2.0 + * pins via channel 1 of TUSB7340RKM xHCI controller and also + * additional SIM card slot, both for USB-based WWAN cards. + */ + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x02000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000>, /* MEM */ + <0x01000000 0x0 0x00000000 0 0xffc00000 0x0 0x00010000>; /* IO */ + + pcie@0 { + ranges; + }; + }; +}; + +/include/ "fsl/p2020si-post.dtsi" diff --git a/dts/src/riscv/canaan/canaan_kd233.dts b/dts/src/riscv/canaan/canaan_kd233.dts index f72540bd14..8df4cf3656 100644 --- a/dts/src/riscv/canaan/canaan_kd233.dts +++ b/dts/src/riscv/canaan/canaan_kd233.dts @@ -127,10 +127,10 @@ cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>; panel@0 { - compatible = "ilitek,ili9341"; + compatible = "canaan,kd233-tft", "ilitek,ili9341"; reg = <0>; dc-gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>; - spi-max-frequency = <15000000>; + spi-max-frequency = <10000000>; status = "disabled"; }; }; @@ -142,7 +142,7 @@ cs-gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; status = "okay"; - slot@0 { + mmc@0 { compatible = "mmc-spi-slot"; reg = <0>; voltage-ranges = <3300 3300>; diff --git a/dts/src/riscv/canaan/k210.dtsi b/dts/src/riscv/canaan/k210.dtsi index 44d3385147..07e2e26496 100644 --- a/dts/src/riscv/canaan/k210.dtsi +++ b/dts/src/riscv/canaan/k210.dtsi @@ -65,15 +65,29 @@ compatible = "riscv,cpu-intc"; }; }; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + }; + }; }; sram: memory@80000000 { device_type = "memory"; + reg = <0x80000000 0x400000>, /* sram0 4 MiB */ + <0x80400000 0x200000>, /* sram1 2 MiB */ + <0x80600000 0x200000>; /* aisram 2 MiB */ + }; + + sram_controller: memory-controller { compatible = "canaan,k210-sram"; - reg = <0x80000000 0x400000>, - <0x80400000 0x200000>, - <0x80600000 0x200000>; - reg-names = "sram0", "sram1", "aisram"; clocks = <&sysclk K210_CLK_SRAM0>, <&sysclk K210_CLK_SRAM1>, <&sysclk K210_CLK_AI>; @@ -161,7 +175,7 @@ #address-cells = <1>; #size-cells = <1>; compatible = "simple-pm-bus"; - ranges; + ranges = <0x50200000 0x50200000 0x200000>; clocks = <&sysclk K210_CLK_APB0>; gpio1: gpio@50200000 { @@ -249,7 +263,7 @@ }; i2s0: i2s@50250000 { - compatible = "snps,designware-i2s"; + compatible = "canaan,k210-i2s", "snps,designware-i2s"; reg = <0x50250000 0x200>; interrupts = <5>; clocks = <&sysclk K210_CLK_I2S0>; @@ -258,7 +272,7 @@ }; i2s1: i2s@50260000 { - compatible = "snps,designware-i2s"; + compatible = "canaan,k210-i2s", "snps,designware-i2s"; reg = <0x50260000 0x200>; interrupts = <6>; clocks = <&sysclk K210_CLK_I2S1>; @@ -267,7 +281,7 @@ }; i2s2: i2s@50270000 { - compatible = "snps,designware-i2s"; + compatible = "canaan,k210-i2s", "snps,designware-i2s"; reg = <0x50270000 0x200>; interrupts = <7>; clocks = <&sysclk K210_CLK_I2S2>; @@ -317,28 +331,58 @@ timer0: timer@502d0000 { compatible = "snps,dw-apb-timer"; - reg = <0x502D0000 0x100>; - interrupts = <14>, <15>; + reg = <0x502D0000 0x14>; + interrupts = <14>; clocks = <&sysclk K210_CLK_TIMER0>, <&sysclk K210_CLK_APB0>; clock-names = "timer", "pclk"; resets = <&sysrst K210_RST_TIMER0>; }; - timer1: timer@502e0000 { + timer1: timer@502d0014 { + compatible = "snps,dw-apb-timer"; + reg = <0x502D0014 0x14>; + interrupts = <15>; + clocks = <&sysclk K210_CLK_TIMER0>, + <&sysclk K210_CLK_APB0>; + clock-names = "timer", "pclk"; + resets = <&sysrst K210_RST_TIMER0>; + }; + + timer2: timer@502e0000 { + compatible = "snps,dw-apb-timer"; + reg = <0x502E0000 0x14>; + interrupts = <16>; + clocks = <&sysclk K210_CLK_TIMER1>, + <&sysclk K210_CLK_APB0>; + clock-names = "timer", "pclk"; + resets = <&sysrst K210_RST_TIMER1>; + }; + + timer3: timer@502e0014 { compatible = "snps,dw-apb-timer"; - reg = <0x502E0000 0x100>; - interrupts = <16>, <17>; + reg = <0x502E0014 0x114>; + interrupts = <17>; clocks = <&sysclk K210_CLK_TIMER1>, <&sysclk K210_CLK_APB0>; clock-names = "timer", "pclk"; resets = <&sysrst K210_RST_TIMER1>; }; - timer2: timer@502f0000 { + timer4: timer@502f0000 { + compatible = "snps,dw-apb-timer"; + reg = <0x502F0000 0x14>; + interrupts = <18>; + clocks = <&sysclk K210_CLK_TIMER2>, + <&sysclk K210_CLK_APB0>; + clock-names = "timer", "pclk"; + resets = <&sysrst K210_RST_TIMER2>; + }; + + timer5: timer@502f0014 { compatible = "snps,dw-apb-timer"; - reg = <0x502F0000 0x100>; - interrupts = <18>, <19>; + reg = <0x502F0014 0x14>; + interrupts = <19>; clocks = <&sysclk K210_CLK_TIMER2>, <&sysclk K210_CLK_APB0>; clock-names = "timer", "pclk"; @@ -350,7 +394,7 @@ #address-cells = <1>; #size-cells = <1>; compatible = "simple-pm-bus"; - ranges; + ranges = <0x50400000 0x50400000 0x40100>; clocks = <&sysclk K210_CLK_APB1>; wdt0: watchdog@50400000 { @@ -405,7 +449,7 @@ #address-cells = <1>; #size-cells = <1>; compatible = "simple-pm-bus"; - ranges; + ranges = <0x52000000 0x52000000 0x2000200>; clocks = <&sysclk K210_CLK_APB2>; spi0: spi@52000000 { @@ -419,7 +463,6 @@ clock-names = "ssi_clk", "pclk"; resets = <&sysrst K210_RST_SPI0>; reset-names = "spi"; - spi-max-frequency = <25000000>; num-cs = <4>; reg-io-width = <4>; }; @@ -435,7 +478,6 @@ clock-names = "ssi_clk", "pclk"; resets = <&sysrst K210_RST_SPI1>; reset-names = "spi"; - spi-max-frequency = <25000000>; num-cs = <4>; reg-io-width = <4>; }; @@ -451,8 +493,7 @@ clock-names = "ssi_clk", "pclk"; resets = <&sysrst K210_RST_SPI3>; reset-names = "spi"; - /* Could possibly go up to 200 MHz */ - spi-max-frequency = <100000000>; + num-cs = <4>; reg-io-width = <4>; }; diff --git a/dts/src/riscv/canaan/sipeed_maix_bit.dts b/dts/src/riscv/canaan/sipeed_maix_bit.dts index 8abdbe26a1..6d25bf0748 100644 --- a/dts/src/riscv/canaan/sipeed_maix_bit.dts +++ b/dts/src/riscv/canaan/sipeed_maix_bit.dts @@ -189,7 +189,7 @@ cs-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; status = "okay"; - slot@0 { + mmc@0 { compatible = "mmc-spi-slot"; reg = <0>; voltage-ranges = <3300 3300>; diff --git a/dts/src/riscv/canaan/sipeed_maix_dock.dts b/dts/src/riscv/canaan/sipeed_maix_dock.dts index 3c6df1ecf7..f4f4d8d5e8 100644 --- a/dts/src/riscv/canaan/sipeed_maix_dock.dts +++ b/dts/src/riscv/canaan/sipeed_maix_dock.dts @@ -191,7 +191,7 @@ cs-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; status = "okay"; - slot@0 { + mmc@0 { compatible = "mmc-spi-slot"; reg = <0>; voltage-ranges = <3300 3300>; diff --git a/dts/src/riscv/canaan/sipeed_maix_go.dts b/dts/src/riscv/canaan/sipeed_maix_go.dts index 03c9843d50..0d86df47e1 100644 --- a/dts/src/riscv/canaan/sipeed_maix_go.dts +++ b/dts/src/riscv/canaan/sipeed_maix_go.dts @@ -199,7 +199,7 @@ cs-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; status = "okay"; - slot@0 { + mmc@0 { compatible = "mmc-spi-slot"; reg = <0>; voltage-ranges = <3300 3300>; diff --git a/dts/src/riscv/canaan/sipeed_maixduino.dts b/dts/src/riscv/canaan/sipeed_maixduino.dts index 7164ad0631..5c05c498e2 100644 --- a/dts/src/riscv/canaan/sipeed_maixduino.dts +++ b/dts/src/riscv/canaan/sipeed_maixduino.dts @@ -164,7 +164,7 @@ cs-gpios = <&gpio1_0 2 GPIO_ACTIVE_LOW>; status = "okay"; - slot@0 { + mmc@0 { compatible = "mmc-spi-slot"; reg = <0>; voltage-ranges = <3300 3300>; diff --git a/dts/src/riscv/microchip/mpfs.dtsi b/dts/src/riscv/microchip/mpfs.dtsi index 496d3b7642..499c2e63ad 100644 --- a/dts/src/riscv/microchip/mpfs.dtsi +++ b/dts/src/riscv/microchip/mpfs.dtsi @@ -142,6 +142,30 @@ interrupt-controller; }; }; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + + core2 { + cpu = <&cpu2>; + }; + + core3 { + cpu = <&cpu3>; + }; + + core4 { + cpu = <&cpu4>; + }; + }; + }; }; refclk: mssrefclk { @@ -291,7 +315,6 @@ interrupt-parent = <&plic>; interrupts = <54>; clocks = <&clkcfg CLK_SPI0>; - spi-max-frequency = <25000000>; status = "disabled"; }; @@ -303,7 +326,6 @@ interrupt-parent = <&plic>; interrupts = <55>; clocks = <&clkcfg CLK_SPI1>; - spi-max-frequency = <25000000>; status = "disabled"; }; @@ -315,7 +337,6 @@ interrupt-parent = <&plic>; interrupts = <85>; clocks = <&clkcfg CLK_QSPI>; - spi-max-frequency = <25000000>; status = "disabled"; }; @@ -343,6 +364,24 @@ status = "disabled"; }; + can0: can@2010c000 { + compatible = "microchip,mpfs-can"; + reg = <0x0 0x2010c000 0x0 0x1000>; + clocks = <&clkcfg CLK_CAN0>; + interrupt-parent = <&plic>; + interrupts = <56>; + status = "disabled"; + }; + + can1: can@2010d000 { + compatible = "microchip,mpfs-can"; + reg = <0x0 0x2010d000 0x0 0x1000>; + clocks = <&clkcfg CLK_CAN1>; + interrupt-parent = <&plic>; + interrupts = <57>; + status = "disabled"; + }; + mac0: ethernet@20110000 { compatible = "cdns,macb"; reg = <0x0 0x20110000 0x0 0x2000>; diff --git a/dts/src/riscv/sifive/fu540-c000.dtsi b/dts/src/riscv/sifive/fu540-c000.dtsi index e3172d0ffa..24bba83bec 100644 --- a/dts/src/riscv/sifive/fu540-c000.dtsi +++ b/dts/src/riscv/sifive/fu540-c000.dtsi @@ -133,6 +133,30 @@ interrupt-controller; }; }; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + + core2 { + cpu = <&cpu2>; + }; + + core3 { + cpu = <&cpu3>; + }; + + core4 { + cpu = <&cpu4>; + }; + }; + }; }; soc { #address-cells = <2>; diff --git a/dts/src/riscv/sifive/fu740-c000.dtsi b/dts/src/riscv/sifive/fu740-c000.dtsi index 7b77c13496..43bed6c0a8 100644 --- a/dts/src/riscv/sifive/fu740-c000.dtsi +++ b/dts/src/riscv/sifive/fu740-c000.dtsi @@ -134,6 +134,30 @@ interrupt-controller; }; }; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + + core2 { + cpu = <&cpu2>; + }; + + core3 { + cpu = <&cpu3>; + }; + + core4 { + cpu = <&cpu4>; + }; + }; + }; }; soc { #address-cells = <2>; diff --git a/dts/src/riscv/sifive/hifive-unmatched-a00.dts b/dts/src/riscv/sifive/hifive-unmatched-a00.dts index c4ed9efdff..07387f9c13 100644 --- a/dts/src/riscv/sifive/hifive-unmatched-a00.dts +++ b/dts/src/riscv/sifive/hifive-unmatched-a00.dts @@ -4,6 +4,8 @@ #include "fu740-c000.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pwm/pwm.h> /* Clock frequency (in Hz) of the PCB crystal for rtcclk */ #define RTCCLK_FREQ 1000000 @@ -44,6 +46,46 @@ compatible = "gpio-poweroff"; gpios = <&gpio 2 GPIO_ACTIVE_LOW>; }; + + led-controller-1 { + compatible = "pwm-leds"; + + led-d12 { + pwms = <&pwm0 0 7812500 PWM_POLARITY_INVERTED>; + active-low; + color = <LED_COLOR_ID_GREEN>; + max-brightness = <255>; + label = "d12"; + }; + }; + + led-controller-2 { + compatible = "pwm-leds-multicolor"; + + multi-led { + color = <LED_COLOR_ID_RGB>; + max-brightness = <255>; + label = "d2"; + + led-red { + pwms = <&pwm0 2 7812500 PWM_POLARITY_INVERTED>; + active-low; + color = <LED_COLOR_ID_RED>; + }; + + led-green { + pwms = <&pwm0 1 7812500 PWM_POLARITY_INVERTED>; + active-low; + color = <LED_COLOR_ID_GREEN>; + }; + + led-blue { + pwms = <&pwm0 3 7812500 PWM_POLARITY_INVERTED>; + active-low; + color = <LED_COLOR_ID_BLUE>; + }; + }; + }; }; &uart0 { @@ -90,7 +132,7 @@ compatible = "dlg,da9063-rtc"; }; - wdt { + watchdog { compatible = "dlg,da9063-watchdog"; }; diff --git a/dts/src/riscv/starfive/jh7100.dtsi b/dts/src/riscv/starfive/jh7100.dtsi index 69f22f9aad..000447482a 100644 --- a/dts/src/riscv/starfive/jh7100.dtsi +++ b/dts/src/riscv/starfive/jh7100.dtsi @@ -17,7 +17,7 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + U74_0: cpu@0 { compatible = "sifive,u74-mc", "riscv"; reg = <0>; d-cache-block-size = <64>; @@ -42,7 +42,7 @@ }; }; - cpu@1 { + U74_1: cpu@1 { compatible = "sifive,u74-mc", "riscv"; reg = <1>; d-cache-block-size = <64>; @@ -66,6 +66,18 @@ #interrupt-cells = <1>; }; }; + + cpu-map { + cluster0 { + core0 { + cpu = <&U74_0>; + }; + + core1 { + cpu = <&U74_1>; + }; + }; + }; }; osc_sys: osc_sys { @@ -118,7 +130,7 @@ interrupt-controller; #address-cells = <0>; #interrupt-cells = <1>; - riscv,ndev = <127>; + riscv,ndev = <133>; }; clkgen: clock-controller@11800000 { |