diff options
Diffstat (limited to 'dts/src/arm64/qcom/sm8450.dtsi')
| -rw-r--r-- | dts/src/arm64/qcom/sm8450.dtsi | 76 |
1 files changed, 55 insertions, 21 deletions
diff --git a/dts/src/arm64/qcom/sm8450.dtsi b/dts/src/arm64/qcom/sm8450.dtsi index b87756bf1c..4978c5ba5d 100644 --- a/dts/src/arm64/qcom/sm8450.dtsi +++ b/dts/src/arm64/qcom/sm8450.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-sm8450.h> #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,sm8450-camcc.h> #include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/mailbox/qcom-ipcc.h> @@ -258,17 +259,18 @@ firmware { scm: scm { compatible = "qcom,scm-sm8450", "qcom,scm"; + interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>; #reset-cells = <1>; }; }; - clk_virt: interconnect@0 { + clk_virt: interconnect-0 { compatible = "qcom,sm8450-clk-virt"; #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; - mc_virt: interconnect@1 { + mc_virt: interconnect-1 { compatible = "qcom,sm8450-mc-virt"; #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; @@ -343,7 +345,7 @@ }; }; - qup_opp_table_100mhz: qup-100mhz-opp-table { + qup_opp_table_100mhz: opp-table-qup { compatible = "operating-points-v2"; opp-50000000 { @@ -976,6 +978,19 @@ status = "disabled"; }; + uart20: serial@894000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00894000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart20_default>; + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + spi20: spi@894000 { compatible = "qcom,geni-spi"; reg = <0 0x00894000 0 0x4000>; @@ -2001,7 +2016,7 @@ <0 0x088e9800 0 0x200>, <0 0x088e9a00 0 0x100>; #phy-cells = <0>; - #clock-cells = <1>; + #clock-cells = <0>; clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; clock-names = "pipe0"; clock-output-names = "usb3_phy_pipe_clk_src"; @@ -2012,7 +2027,7 @@ compatible = "qcom,sm8450-slpi-pas"; reg = <0 0x02400000 0 0x4000>; - interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&pdc 9 IRQ_TYPE_EDGE_RISING>, <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>, <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>, <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>, @@ -2079,7 +2094,7 @@ compatible = "qcom,sm8450-adsp-pas"; reg = <0 0x030000000 0 0x100>; - interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, @@ -2145,7 +2160,7 @@ compatible = "qcom,sm8450-cdsp-pas"; reg = <0 0x032300000 0 0x1400000>; - interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>, @@ -2251,7 +2266,7 @@ compatible = "qcom,sm8450-mpss-pas"; reg = <0x0 0x04080000 0x0 0x4040>; - interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>, <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>, <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>, <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>, @@ -2282,12 +2297,26 @@ IRQ_TYPE_EDGE_RISING>; mboxes = <&ipcc IPCC_CLIENT_MPSS IPCC_MPROC_SIGNAL_GLINK_QMP>; - interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>; label = "modem"; qcom,remote-pid = <1>; }; }; + camcc: clock-controller@ade0000 { + compatible = "qcom,sm8450-camcc"; + reg = <0 0x0ade0000 0 0x20000>; + clocks = <&gcc GCC_CAMERA_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>; + power-domains = <&rpmhpd SM8450_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + status = "disabled"; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,sm8450-pdc", "qcom,pdc"; reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>; @@ -2738,6 +2767,12 @@ drive-strength = <2>; bias-disable; }; + + qup_uart20_default: qup-uart20-default { + pins = "gpio76", "gpio77", "gpio78", "gpio79"; + function = "qup20"; + }; + }; apps_smmu: iommu@15000000 { @@ -2867,9 +2902,9 @@ timer@17420000 { compatible = "arm,armv7-timer-mem"; - #address-cells = <2>; - #size-cells = <2>; - ranges; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0x20000000>; reg = <0x0 0x17420000 0x0 0x1000>; clock-frequency = <19200000>; @@ -2877,49 +2912,49 @@ frame-number = <0>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17421000 0x0 0x1000>, - <0x0 0x17422000 0x0 0x1000>; + reg = <0x17421000 0x1000>, + <0x17422000 0x1000>; }; frame@17423000 { frame-number = <1>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17423000 0x0 0x1000>; + reg = <0x17423000 0x1000>; status = "disabled"; }; frame@17425000 { frame-number = <2>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17425000 0x0 0x1000>; + reg = <0x17425000 0x1000>; status = "disabled"; }; frame@17427000 { frame-number = <3>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17427000 0x0 0x1000>; + reg = <0x17427000 0x1000>; status = "disabled"; }; frame@17429000 { frame-number = <4>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17429000 0x0 0x1000>; + reg = <0x17429000 0x1000>; status = "disabled"; }; frame@1742b000 { frame-number = <5>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x1742b000 0x0 0x1000>; + reg = <0x1742b000 0x1000>; status = "disabled"; }; frame@1742d000 { frame-number = <6>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x1742d000 0x0 0x1000>; + reg = <0x1742d000 0x1000>; status = "disabled"; }; }; @@ -3102,7 +3137,6 @@ <0 0x01d87800 0 0x108>, <0 0x01d87a00 0 0x1e0>; #phy-cells = <0>; - #clock-cells = <0>; }; }; |