diff options
Diffstat (limited to 'dts/src/arm64/qcom/msm8998.dtsi')
| -rw-r--r-- | dts/src/arm64/qcom/msm8998.dtsi | 87 |
1 files changed, 29 insertions, 58 deletions
diff --git a/dts/src/arm64/qcom/msm8998.dtsi b/dts/src/arm64/qcom/msm8998.dtsi index 758c45bbbe..02d21bff21 100644 --- a/dts/src/arm64/qcom/msm8998.dtsi +++ b/dts/src/arm64/qcom/msm8998.dtsi @@ -838,7 +838,7 @@ }; qfprom: qfprom@784000 { - compatible = "qcom,qfprom"; + compatible = "qcom,msm8998-qfprom", "qcom,qfprom"; reg = <0x00784000 0x621c>; #address-cells = <1>; #size-cells = <1>; @@ -929,7 +929,7 @@ interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 0 135 IRQ_TYPE_LEVEL_HIGH>, + interrupt-map = <0 0 0 1 &intc 0 0 135 IRQ_TYPE_LEVEL_HIGH>, <0 0 0 2 &intc 0 0 136 IRQ_TYPE_LEVEL_HIGH>, <0 0 0 3 &intc 0 0 138 IRQ_TYPE_LEVEL_HIGH>, <0 0 0 4 &intc 0 0 139 IRQ_TYPE_LEVEL_HIGH>; @@ -1057,85 +1057,58 @@ reg = <0x03400000 0xc00000>; interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; - #gpio-cells = <0x2>; + #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <0x2>; + #interrupt-cells = <2>; - sdc2_clk_on: sdc2_clk_on { - config { + sdc2_on: sdc2-on { + clk { pins = "sdc2_clk"; - bias-disable; drive-strength = <16>; - }; - }; - - sdc2_clk_off: sdc2_clk_off { - config { - pins = "sdc2_clk"; bias-disable; - drive-strength = <2>; }; - }; - sdc2_cmd_on: sdc2_cmd_on { - config { + cmd { pins = "sdc2_cmd"; - bias-pull-up; drive-strength = <10>; - }; - }; - - sdc2_cmd_off: sdc2_cmd_off { - config { - pins = "sdc2_cmd"; bias-pull-up; - drive-strength = <2>; }; - }; - sdc2_data_on: sdc2_data_on { - config { + data { pins = "sdc2_data"; - bias-pull-up; drive-strength = <10>; + bias-pull-up; }; }; - sdc2_data_off: sdc2_data_off { - config { - pins = "sdc2_data"; - bias-pull-up; + sdc2_off: sdc2-off { + clk { + pins = "sdc2_clk"; drive-strength = <2>; + bias-disable; }; - }; - sdc2_cd_on: sdc2_cd_on { - mux { - pins = "gpio95"; - function = "gpio"; + cmd { + pins = "sdc2_cmd"; + drive-strength = <2>; + bias-pull-up; }; - config { - pins = "gpio95"; - bias-pull-up; + data { + pins = "sdc2_data"; drive-strength = <2>; + bias-pull-up; }; }; - sdc2_cd_off: sdc2_cd_off { - mux { - pins = "gpio95"; - function = "gpio"; - }; - - config { - pins = "gpio95"; - bias-pull-up; - drive-strength = <2>; - }; + sdc2_cd: sdc2-cd { + pins = "gpio95"; + function = "gpio"; + bias-pull-up; + drive-strength = <2>; }; - blsp1_uart3_on: blsp1_uart3_on { + blsp1_uart3_on: blsp1-uart3-on { tx { pins = "gpio45"; function = "blsp_uart3_a"; @@ -1416,7 +1389,7 @@ status = "disabled"; gpu_opp_table: opp-table { - compatible = "operating-points-v2"; + compatible = "operating-points-v2"; opp-710000097 { opp-hz = /bits/ 64 <710000097>; opp-level = <RPM_SMD_LEVEL_TURBO>; @@ -2080,7 +2053,7 @@ <0xc010600 0x128>, <0xc010800 0x200>; #phy-cells = <0>; - #clock-cells = <1>; + #clock-cells = <0>; clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>; clock-names = "pipe0"; clock-output-names = "usb3_phy_pipe_clk_src"; @@ -2102,7 +2075,7 @@ nvmem-cells = <&qusb2_hstx_trim>; }; - sdhc2: sdhci@c0a4900 { + sdhc2: mmc@c0a4900 { compatible = "qcom,sdhci-msm-v4"; reg = <0x0c0a4900 0x314>, <0x0c0a4000 0x800>; reg-names = "hc_mem", "core_mem"; @@ -2415,7 +2388,6 @@ #reset-cells = <1>; #power-domain-cells = <1>; reg = <0xc8c0000 0x40000>; - status = "disabled"; clock-names = "xo", "gpll0", @@ -2450,7 +2422,6 @@ <&mmcc BIMC_SMMU_AXI_CLK>; clock-names = "iface-mm", "iface-smmu", "bus-mm", "bus-smmu"; - status = "disabled"; #global-interrupts = <0>; interrupts = |