diff options
Diffstat (limited to 'dts/src/arm64/qcom/sc7280-idp.dtsi')
| -rw-r--r-- | dts/src/arm64/qcom/sc7280-idp.dtsi | 36 |
1 files changed, 30 insertions, 6 deletions
diff --git a/dts/src/arm64/qcom/sc7280-idp.dtsi b/dts/src/arm64/qcom/sc7280-idp.dtsi index ecbf2b89d8..5eb668991e 100644 --- a/dts/src/arm64/qcom/sc7280-idp.dtsi +++ b/dts/src/arm64/qcom/sc7280-idp.dtsi @@ -233,6 +233,14 @@ }; }; +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + &ipa { status = "okay"; modem-init; @@ -400,10 +408,13 @@ &qup_uart7_cts { /* - * Configure a pull-down on CTS to match the pull of - * the Bluetooth module. + * Configure a bias-bus-hold on CTS to lower power + * usage when Bluetooth is turned off. Bus hold will + * maintain a low power state regardless of whether + * the Bluetooth module drives the pin in either + * direction or leaves the pin fully unpowered. */ - bias-pull-down; + bias-bus-hold; }; &qup_uart7_rts { @@ -495,10 +506,13 @@ pins = "gpio28"; function = "gpio"; /* - * Configure a pull-down on CTS to match the pull of - * the Bluetooth module. + * Configure a bias-bus-hold on CTS to lower power + * usage when Bluetooth is turned off. Bus hold will + * maintain a low power state regardless of whether + * the Bluetooth module drives the pin in either + * direction or leaves the pin fully unpowered. */ - bias-pull-down; + bias-bus-hold; }; qup_uart7_sleep_rts: qup-uart7-sleep-rts { @@ -547,3 +561,13 @@ }; }; +&remoteproc_wpss { + status = "okay"; +}; + +&wifi { + status = "okay"; + wifi-firmware { + iommus = <&apps_smmu 0x1c02 0x1>; + }; +}; |