diff options
Diffstat (limited to 'dts/src/arm64/qcom')
83 files changed, 6469 insertions, 1983 deletions
diff --git a/dts/src/arm64/qcom/apq8096-db820c.dts b/dts/src/arm64/qcom/apq8096-db820c.dts index f623db8451..49afbb1a06 100644 --- a/dts/src/arm64/qcom/apq8096-db820c.dts +++ b/dts/src/arm64/qcom/apq8096-db820c.dts @@ -258,6 +258,12 @@ vdd-gfx-supply = <&vdd_gfx>; }; +&mss_pil { + status = "okay"; + pll-supply = <&vreg_l12a_1p8>; + firmware-name = "qcom/apq8096/mba.mbn", "qcom/apq8096/modem.mbn"; +}; + &pm8994_resin { status = "okay"; linux,code = <KEY_VOLUMEDOWN>; @@ -1046,22 +1052,22 @@ &usb2 { status = "okay"; extcon = <&usb2_id>; +}; - dwc3@7600000 { - extcon = <&usb2_id>; - dr_mode = "otg"; - maximum-speed = "high-speed"; - }; +&usb2_dwc3 { + extcon = <&usb2_id>; + dr_mode = "otg"; + maximum-speed = "high-speed"; }; &usb3 { status = "okay"; extcon = <&usb3_id>; +}; - dwc3@6a00000 { - extcon = <&usb3_id>; - dr_mode = "otg"; - }; +&usb3_dwc3 { + extcon = <&usb3_id>; + dr_mode = "otg"; }; &usb3phy { diff --git a/dts/src/arm64/qcom/ipq6018-cp01-c1.dts b/dts/src/arm64/qcom/ipq6018-cp01-c1.dts index 5aec183087..821cb7c0c1 100644 --- a/dts/src/arm64/qcom/ipq6018-cp01-c1.dts +++ b/dts/src/arm64/qcom/ipq6018-cp01-c1.dts @@ -39,7 +39,7 @@ cs-select = <0>; status = "okay"; - m25p80@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; reg = <0>; diff --git a/dts/src/arm64/qcom/ipq6018.dtsi b/dts/src/arm64/qcom/ipq6018.dtsi index aac56575e3..c89499e366 100644 --- a/dts/src/arm64/qcom/ipq6018.dtsi +++ b/dts/src/arm64/qcom/ipq6018.dtsi @@ -318,12 +318,12 @@ #size-cells = <0>; reg = <0x0 0x078b6000 0x0 0x600>; interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; clock-frequency = <400000>; - dmas = <&blsp_dma 15>, <&blsp_dma 14>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 14>, <&blsp_dma 15>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -333,12 +333,12 @@ #size-cells = <0>; reg = <0x0 0x078b7000 0x0 0x600>; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; clock-frequency = <400000>; - dmas = <&blsp_dma 17>, <&blsp_dma 16>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 16>, <&blsp_dma 17>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -630,6 +630,16 @@ }; }; + mdio: mdio@90000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "qcom,ipq6018-mdio", "qcom,ipq4019-mdio"; + reg = <0x0 0x90000 0x0 0x64>; + clocks = <&gcc GCC_MDIO_AHB_CLK>; + clock-names = "gcc_mdio_ahb_clk"; + status = "disabled"; + }; + qusb_phy_1: qusb@59000 { compatible = "qcom,ipq6018-qusb2-phy"; reg = <0x0 0x059000 0x0 0x180>; @@ -643,7 +653,7 @@ status = "disabled"; }; - usb2: usb2@7000000 { + usb2: usb@70f8800 { compatible = "qcom,ipq6018-dwc3", "qcom,dwc3"; reg = <0x0 0x070F8800 0x0 0x400>; #address-cells = <2>; @@ -652,7 +662,7 @@ clocks = <&gcc GCC_USB1_MASTER_CLK>, <&gcc GCC_USB1_SLEEP_CLK>, <&gcc GCC_USB1_MOCK_UTMI_CLK>; - clock-names = "master", + clock-names = "core", "sleep", "mock_utmi"; @@ -683,7 +693,6 @@ reg = <0x0 0x78000 0x0 0x1C4>; #address-cells = <2>; #size-cells = <2>; - #clock-cells = <1>; ranges; clocks = <&gcc GCC_USB0_AUX_CLK>, @@ -695,12 +704,13 @@ reset-names = "phy","common"; status = "disabled"; - usb0_ssphy: lane@78200 { + usb0_ssphy: phy@78200 { reg = <0x0 0x00078200 0x0 0x130>, /* Tx */ <0x0 0x00078400 0x0 0x200>, /* Rx */ <0x0 0x00078800 0x0 0x1F8>, /* PCS */ <0x0 0x00078600 0x0 0x044>; /* PCS misc */ #phy-cells = <0>; + #clock-cells = <1>; clocks = <&gcc GCC_USB0_PIPE_CLK>; clock-names = "pipe0"; clock-output-names = "gcc_usb0_pipe_clk_src"; @@ -720,7 +730,7 @@ status = "disabled"; }; - usb3: usb3@8A00000 { + usb3: usb@8af8800 { compatible = "qcom,ipq6018-dwc3", "qcom,dwc3"; reg = <0x0 0x8AF8800 0x0 0x400>; #address-cells = <2>; @@ -731,8 +741,8 @@ <&gcc GCC_USB0_MASTER_CLK>, <&gcc GCC_USB0_SLEEP_CLK>, <&gcc GCC_USB0_MOCK_UTMI_CLK>; - clock-names = "sys_noc_axi", - "master", + clock-names = "cfg_noc", + "core", "sleep", "mock_utmi"; @@ -746,7 +756,7 @@ resets = <&gcc GCC_USB0_BCR>; status = "disabled"; - dwc_0: usb@8A00000 { + dwc_0: usb@8a00000 { compatible = "snps,dwc3"; reg = <0x0 0x8A00000 0x0 0xcd00>; interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; diff --git a/dts/src/arm64/qcom/ipq8074-hk01.dts b/dts/src/arm64/qcom/ipq8074-hk01.dts index b5e1eaa367..de20cb98ac 100644 --- a/dts/src/arm64/qcom/ipq8074-hk01.dts +++ b/dts/src/arm64/qcom/ipq8074-hk01.dts @@ -35,7 +35,7 @@ &blsp1_spi1 { status = "okay"; - m25p80@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/dts/src/arm64/qcom/ipq8074-hk10.dtsi b/dts/src/arm64/qcom/ipq8074-hk10.dtsi index 07e6708296..ce86d9b10d 100644 --- a/dts/src/arm64/qcom/ipq8074-hk10.dtsi +++ b/dts/src/arm64/qcom/ipq8074-hk10.dtsi @@ -29,7 +29,7 @@ &blsp1_spi1 { status = "ok"; - m25p80@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/dts/src/arm64/qcom/ipq8074.dtsi b/dts/src/arm64/qcom/ipq8074.dtsi index d80b1cefab..4c38b15c6f 100644 --- a/dts/src/arm64/qcom/ipq8074.dtsi +++ b/dts/src/arm64/qcom/ipq8074.dtsi @@ -13,7 +13,7 @@ clocks { sleep_clk: sleep_clk { compatible = "fixed-clock"; - clock-frequency = <32000>; + clock-frequency = <32768>; #clock-cells = <0>; }; @@ -467,12 +467,12 @@ #size-cells = <0>; reg = <0x078b6000 0x600>; interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; clock-frequency = <400000>; - dmas = <&blsp_dma 15>, <&blsp_dma 14>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 14>, <&blsp_dma 15>; + dma-names = "tx", "rx"; pinctrl-0 = <&i2c_0_pins>; pinctrl-names = "default"; status = "disabled"; @@ -484,12 +484,12 @@ #size-cells = <0>; reg = <0x078b7000 0x600>; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; clock-frequency = <100000>; - dmas = <&blsp_dma 17>, <&blsp_dma 16>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 16>, <&blsp_dma 17>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -499,12 +499,12 @@ #size-cells = <0>; reg = <0x78b9000 0x600>; interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; clock-frequency = <400000>; - dmas = <&blsp_dma 21>, <&blsp_dma 20>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 20>, <&blsp_dma 21>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -514,12 +514,12 @@ #size-cells = <0>; reg = <0x078ba000 0x600>; interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; clock-frequency = <100000>; - dmas = <&blsp_dma 23>, <&blsp_dma 22>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 22>, <&blsp_dma 23>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -553,7 +553,7 @@ }; usb_0: usb@8af8800 { - compatible = "qcom,dwc3"; + compatible = "qcom,ipq8074-dwc3", "qcom,dwc3"; reg = <0x08af8800 0x400>; #address-cells = <1>; #size-cells = <1>; @@ -563,8 +563,8 @@ <&gcc GCC_USB0_MASTER_CLK>, <&gcc GCC_USB0_SLEEP_CLK>, <&gcc GCC_USB0_MOCK_UTMI_CLK>; - clock-names = "sys_noc_axi", - "master", + clock-names = "cfg_noc", + "core", "sleep", "mock_utmi"; @@ -578,7 +578,7 @@ resets = <&gcc GCC_USB0_BCR>; status = "disabled"; - dwc_0: dwc3@8a00000 { + dwc_0: usb@8a00000 { compatible = "snps,dwc3"; reg = <0x8a00000 0xcd00>; interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; @@ -593,7 +593,7 @@ }; usb_1: usb@8cf8800 { - compatible = "qcom,dwc3"; + compatible = "qcom,ipq8074-dwc3", "qcom,dwc3"; reg = <0x08cf8800 0x400>; #address-cells = <1>; #size-cells = <1>; @@ -603,8 +603,8 @@ <&gcc GCC_USB1_MASTER_CLK>, <&gcc GCC_USB1_SLEEP_CLK>, <&gcc GCC_USB1_MOCK_UTMI_CLK>; - clock-names = "sys_noc_axi", - "master", + clock-names = "cfg_noc", + "core", "sleep", "mock_utmi"; @@ -618,7 +618,7 @@ resets = <&gcc GCC_USB1_BCR>; status = "disabled"; - dwc_1: dwc3@8c00000 { + dwc_1: usb@8c00000 { compatible = "snps,dwc3"; reg = <0x8c00000 0xcd00>; interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; diff --git a/dts/src/arm64/qcom/msm8916-huawei-g7.dts b/dts/src/arm64/qcom/msm8916-huawei-g7.dts index 42d93d3fba..00488afb41 100644 --- a/dts/src/arm64/qcom/msm8916-huawei-g7.dts +++ b/dts/src/arm64/qcom/msm8916-huawei-g7.dts @@ -8,18 +8,14 @@ #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/leds/common.h> +#include <dt-bindings/sound/apq8016-lpass.h> /* * Note: The original firmware from Huawei can only boot 32-bit kernels. - * To boot arm64 kernels it is necessary to flash 64-bit TZ/HYP firmware - * with EDL, e.g. taken from the DragonBoard 410c. This works because Huawei - * forgot to set up (firmware) secure boot for some reason. - * - * Also note that Huawei no longer provides bootloader unlock codes. - * This can be bypassed by patching the bootloader from a custom HYP firmware, - * making it think the bootloader is unlocked. - * - * See: https://wiki.postmarketos.org/wiki/Huawei_Ascend_G7_(huawei-g7) + * To boot this device tree using arm64 it is necessary to flash 64-bit TZ/HYP + * firmware (e.g. taken from the DragonBoard 410c). + * See https://wiki.postmarketos.org/wiki/Huawei_Ascend_G7_(huawei-g7) + * for suggested installation instructions. */ / { @@ -216,6 +212,10 @@ status = "okay"; }; +&lpass { + status = "okay"; +}; + &pm8916_resin { status = "okay"; linux,code = <KEY_VOLUMEDOWN>; @@ -260,6 +260,40 @@ cd-gpios = <&msmgpio 56 GPIO_ACTIVE_LOW>; }; +&sound { + status = "okay"; + + model = "msm8916"; + audio-routing = + "AMIC1", "MIC BIAS External1", + "AMIC2", "MIC BIAS External2", + "AMIC3", "MIC BIAS External1"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cdc_pdm_lines_act>; + pinctrl-1 = <&cdc_pdm_lines_sus>; + + primary-dai-link { + link-name = "WCD"; + cpu { + sound-dai = <&lpass MI2S_PRIMARY>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; + }; + }; + + tertiary-dai-link { + link-name = "WCD-Capture"; + cpu { + sound-dai = <&lpass MI2S_TERTIARY>; + }; + codec { + sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; + }; + }; +}; + &usb { status = "okay"; extcon = <&usb_id>, <&usb_id>; @@ -269,6 +303,13 @@ extcon = <&usb_id>; }; +&wcd_codec { + qcom,micbias-lvl = <2800>; + qcom,mbhc-vthreshold-low = <75 150 237 450 500>; + qcom,mbhc-vthreshold-high = <75 150 237 450 500>; + qcom,hphl-jack-type-normally-open; +}; + &smd_rpm_regulators { vdd_l1_l2_l3-supply = <&pm8916_s3>; vdd_l4_l5_l6-supply = <&pm8916_s4>; diff --git a/dts/src/arm64/qcom/msm8916.dtsi b/dts/src/arm64/qcom/msm8916.dtsi index e34963505e..05472510e2 100644 --- a/dts/src/arm64/qcom/msm8916.dtsi +++ b/dts/src/arm64/qcom/msm8916.dtsi @@ -299,7 +299,7 @@ qcom,smd-channels = "rpm_requests"; rpmcc: clock-controller { - compatible = "qcom,rpmcc-msm8916"; + compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc"; #clock-cells = <1>; }; @@ -1314,6 +1314,20 @@ #interrupt-cells = <4>; }; + bam_dmux_dma: dma-controller@4044000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x04044000 0x19000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + qcom,ee = <0>; + + num-channels = <6>; + qcom,num-ees = <1>; + qcom,powered-remotely; + + status = "disabled"; + }; + mpss: remoteproc@4080000 { compatible = "qcom,msm8916-mss-pil", "qcom,q6v5-pil"; reg = <0x04080000 0x100>, @@ -1357,6 +1371,22 @@ memory-region = <&mpss_mem>; }; + bam_dmux: bam-dmux { + compatible = "qcom,bam-dmux"; + + interrupt-parent = <&hexagon_smsm>; + interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "pc", "pc-ack"; + + qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>; + qcom,smem-state-names = "pc", "pc-ack"; + + dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>; + dma-names = "tx", "rx"; + + status = "disabled"; + }; + smd-edge { interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; @@ -1485,8 +1515,8 @@ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; - dmas = <&blsp_dma 1>, <&blsp_dma 0>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 0>, <&blsp_dma 1>; + dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&blsp1_uart1_default>; pinctrl-1 = <&blsp1_uart1_sleep>; @@ -1499,8 +1529,8 @@ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; - dmas = <&blsp_dma 3>, <&blsp_dma 2>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 2>, <&blsp_dma 3>; + dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&blsp1_uart2_default>; pinctrl-1 = <&blsp1_uart2_sleep>; @@ -1511,9 +1541,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x078b5000 0x500>; interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c1_default>; pinctrl-1 = <&i2c1_sleep>; @@ -1529,8 +1559,8 @@ clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; - dmas = <&blsp_dma 5>, <&blsp_dma 4>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 4>, <&blsp_dma 5>; + dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&spi1_default>; pinctrl-1 = <&spi1_sleep>; @@ -1543,9 +1573,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x078b6000 0x500>; interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c2_default>; pinctrl-1 = <&i2c2_sleep>; @@ -1561,8 +1591,8 @@ clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; - dmas = <&blsp_dma 7>, <&blsp_dma 6>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 6>, <&blsp_dma 7>; + dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&spi2_default>; pinctrl-1 = <&spi2_sleep>; @@ -1575,9 +1605,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x078b7000 0x500>; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c3_default>; pinctrl-1 = <&i2c3_sleep>; @@ -1593,8 +1623,8 @@ clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; - dmas = <&blsp_dma 9>, <&blsp_dma 8>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 8>, <&blsp_dma 9>; + dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&spi3_default>; pinctrl-1 = <&spi3_sleep>; @@ -1607,9 +1637,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x078b8000 0x500>; interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c4_default>; pinctrl-1 = <&i2c4_sleep>; @@ -1625,8 +1655,8 @@ clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; - dmas = <&blsp_dma 11>, <&blsp_dma 10>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 10>, <&blsp_dma 11>; + dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&spi4_default>; pinctrl-1 = <&spi4_sleep>; @@ -1639,9 +1669,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x078b9000 0x500>; interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c5_default>; pinctrl-1 = <&i2c5_sleep>; @@ -1657,8 +1687,8 @@ clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; - dmas = <&blsp_dma 13>, <&blsp_dma 12>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 12>, <&blsp_dma 13>; + dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&spi5_default>; pinctrl-1 = <&spi5_sleep>; @@ -1671,9 +1701,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x078ba000 0x500>; interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c6_default>; pinctrl-1 = <&i2c6_sleep>; @@ -1689,8 +1719,8 @@ clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; - dmas = <&blsp_dma 15>, <&blsp_dma 14>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 14>, <&blsp_dma 15>; + dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&spi6_default>; pinctrl-1 = <&spi6_sleep>; @@ -1788,7 +1818,7 @@ qcom,mmio = <&pronto>; - bt { + bluetooth { compatible = "qcom,wcnss-bt"; }; diff --git a/dts/src/arm64/qcom/msm8953.dtsi b/dts/src/arm64/qcom/msm8953.dtsi index 431228faac..ffc3ec2cd3 100644 --- a/dts/src/arm64/qcom/msm8953.dtsi +++ b/dts/src/arm64/qcom/msm8953.dtsi @@ -321,12 +321,12 @@ qcom,ipc = <&apcs 8 0>; qcom,smd-edge = <15>; - rpm_requests: rpm_requests { + rpm_requests: rpm-requests { compatible = "qcom,rpm-msm8953"; qcom,smd-channels = "rpm_requests"; rpmcc: rpmcc { - compatible = "qcom,rpmcc-msm8953"; + compatible = "qcom,rpmcc-msm8953", "qcom,rpmcc"; clocks = <&xo_board>; clock-names = "xo"; #clock-cells = <1>; @@ -759,10 +759,13 @@ clocks = <&gcc GCC_USB_PHY_CFG_AHB_CLK>, <&gcc GCC_USB30_MASTER_CLK>, <&gcc GCC_PCNOC_USB3_AXI_CLK>, - <&gcc GCC_USB30_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_SLEEP_CLK>; - clock-names = "cfg_noc", "core", "iface", - "mock_utmi", "sleep"; + <&gcc GCC_USB30_SLEEP_CLK>, + <&gcc GCC_USB30_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, <&gcc GCC_USB30_MASTER_CLK>; @@ -923,9 +926,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x78b5000 0x600>; interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "iface", "core"; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c_1_default>; @@ -941,9 +944,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x78b6000 0x600>; interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "iface", "core"; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c_2_default>; @@ -959,9 +962,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x78b7000 0x600>; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "iface", "core"; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c_3_default>; pinctrl-1 = <&i2c_3_sleep>; @@ -976,9 +979,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x78b8000 0x600>; interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "iface", "core"; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c_4_default>; pinctrl-1 = <&i2c_4_sleep>; @@ -993,9 +996,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x7af5000 0x600>; interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "iface", "core"; - clocks = <&gcc GCC_BLSP2_AHB_CLK>, - <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c_5_default>; pinctrl-1 = <&i2c_5_sleep>; @@ -1010,9 +1013,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x7af6000 0x600>; interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "iface", "core"; - clocks = <&gcc GCC_BLSP2_AHB_CLK>, - <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c_6_default>; pinctrl-1 = <&i2c_6_sleep>; @@ -1027,9 +1030,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x7af7000 0x600>; interrupts = <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "iface", "core"; - clocks = <&gcc GCC_BLSP2_AHB_CLK>, - <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c_7_default>; pinctrl-1 = <&i2c_7_sleep>; @@ -1044,9 +1047,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x7af8000 0x600>; interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "iface", "core"; - clocks = <&gcc GCC_BLSP2_AHB_CLK>, - <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c_8_default>; pinctrl-1 = <&i2c_8_sleep>; diff --git a/dts/src/arm64/qcom/msm8992-xiaomi-libra.dts b/dts/src/arm64/qcom/msm8992-xiaomi-libra.dts index 84558ab5fe..7748b745a5 100644 --- a/dts/src/arm64/qcom/msm8992-xiaomi-libra.dts +++ b/dts/src/arm64/qcom/msm8992-xiaomi-libra.dts @@ -23,20 +23,31 @@ /* This enables graphical output via bootloader-enabled display */ chosen { - bootargs = "earlycon=tty0 console=tty0"; + bootargs = "earlycon=tty0 console=tty0 maxcpus=1"; #address-cells = <2>; #size-cells = <2>; ranges; - framebuffer0: framebuffer@3404000 { - status= "okay"; + framebuffer0: framebuffer@3400000 { compatible = "simple-framebuffer"; - reg = <0 0x3404000 0 (1080 * 1920 * 3)>; + reg = <0 0x3400000 0 (1080 * 1920 * 3)>; width = <1080>; height = <1920>; stride = <(1080 * 3)>; format = "r8g8b8"; + /* + * That's a lot of clocks, but it's necessary due + * to unused clk cleanup & no panel driver yet.. + */ + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_VSYNC_CLK>, + <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_BYTE0_CLK>, + <&mmcc MDSS_PCLK0_CLK>, + <&mmcc MDSS_ESC0_CLK>; + power-domains = <&mmcc MDSS_GDSC>; }; }; @@ -126,6 +137,23 @@ no-map; }; +&pm8994_spmi_regulators { + VDD_APC0: s8 { + regulator-min-microvolt = <680000>; + regulator-max-microvolt = <1180000>; + regulator-always-on; + regulator-boot-on; + }; + + /* APC1 is 3-phase, but quoting downstream, s11 is "the gang leader" */ + VDD_APC1: s11 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1225000>; + regulator-always-on; + regulator-boot-on; + }; +}; + &rpm_requests { pm8994-regulators { compatible = "qcom,rpm-pm8994-regulators"; diff --git a/dts/src/arm64/qcom/msm8992.dtsi b/dts/src/arm64/qcom/msm8992.dtsi index 58fe58cc77..750643763a 100644 --- a/dts/src/arm64/qcom/msm8992.dtsi +++ b/dts/src/arm64/qcom/msm8992.dtsi @@ -10,8 +10,30 @@ /delete-node/ &cpu6_map; /delete-node/ &cpu7_map; +&gcc { + compatible = "qcom,gcc-msm8992"; +}; + +&mmcc { + compatible = "qcom,mmcc-msm8992"; + + assigned-clock-rates = <800000000>, + <808000000>, + <1020000000>, + <960000000>, + <800000000>; +}; + +&ocmem { + reg = <0xfdd00000 0x2000>, <0xfec00000 0x100000>; + + gmu-sram@0 { + reg = <0x0 0x80000>; + }; +}; + &rpmcc { - compatible = "qcom,rpmcc-msm8992"; + compatible = "qcom,rpmcc-msm8992", "qcom,rpmcc"; }; &tcsr_mutex { diff --git a/dts/src/arm64/qcom/msm8994-huawei-angler-rev-101.dts b/dts/src/arm64/qcom/msm8994-huawei-angler-rev-101.dts index 0e3dd48f0d..dbfbb77e9f 100644 --- a/dts/src/arm64/qcom/msm8994-huawei-angler-rev-101.dts +++ b/dts/src/arm64/qcom/msm8994-huawei-angler-rev-101.dts @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0-only /* Copyright (c) 2015, Huawei Inc. All rights reserved. * Copyright (c) 2016, The Linux Foundation. All rights reserved. - * Copyright (c) 2021, Petr Vorel <petr.vorel@gmail.com> + * Copyright (c) 2021-2022, Petr Vorel <petr.vorel@gmail.com> */ /dts-v1/; @@ -27,17 +27,20 @@ chosen { stdout-path = "serial0:115200n8"; }; +}; - soc { - serial@f991e000 { - status = "okay"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp1_uart2_default>; - pinctrl-1 = <&blsp1_uart2_sleep>; - }; - }; +&blsp1_uart2 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_uart2_default>; + pinctrl-1 = <&blsp1_uart2_sleep>; }; &tlmm { gpio-reserved-ranges = <85 4>; }; + +&sdhc1 { + status = "okay"; + mmc-hs400-1_8v; +}; diff --git a/dts/src/arm64/qcom/msm8994-sony-xperia-kitakami.dtsi b/dts/src/arm64/qcom/msm8994-sony-xperia-kitakami.dtsi index dde7ed159c..e5a45af0bd 100644 --- a/dts/src/arm64/qcom/msm8994-sony-xperia-kitakami.dtsi +++ b/dts/src/arm64/qcom/msm8994-sony-xperia-kitakami.dtsi @@ -108,13 +108,6 @@ /* NXP PN547 NFC */ }; -&blsp1_i2c4 { - status = "okay"; - clock-frequency = <355000>; - - /* Empty but active */ -}; - &blsp1_i2c6 { status = "okay"; clock-frequency = <355000>; @@ -194,26 +187,38 @@ }; &rpm_requests { + /* PMI8994 should probe first, because pmi8994_bby supplies some of PM8994's regulators */ + pmi8994_regulators: pmi8994-regulators { + compatible = "qcom,rpm-pmi8994-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_bst_byp-supply = <&vph_pwr>; + + pmi8994_s1: s1 { + regulator-min-microvolt = <1025000>; + regulator-max-microvolt = <1025000>; + }; + + /* S2 & S3 - VDD_GFX */ + + pmi8994_bby: boost-bypass { + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3600000>; + }; + }; + pm8994_regulators: pm8994-regulators { compatible = "qcom,rpm-pm8994-regulators"; - vdd_s1-supply = <&vph_pwr>; - vdd_s2-supply = <&vph_pwr>; vdd_s3-supply = <&vph_pwr>; vdd_s4-supply = <&vph_pwr>; vdd_s5-supply = <&vph_pwr>; vdd_s6-supply = <&vph_pwr>; vdd_s7-supply = <&vph_pwr>; - vdd_s8-supply = <&vph_pwr>; - vdd_s9-supply = <&vph_pwr>; - vdd_s10-supply = <&vph_pwr>; - vdd_s11-supply = <&vph_pwr>; - vdd_s12-supply = <&vph_pwr>; vdd_l1-supply = <&pmi8994_s1>; vdd_l2_l26_l28-supply = <&pm8994_s3>; vdd_l3_l11-supply = <&pm8994_s3>; vdd_l4_l27_l31-supply = <&pm8994_s3>; - vdd_l5_l7-supply = <&pm8994_s5>; vdd_l6_l12_l32-supply = <&pm8994_s5>; vdd_l8_l16_l30-supply = <&vph_pwr>; vdd_l9_l10_l18_l22-supply = <&pmi8994_bby>; @@ -234,9 +239,9 @@ pm8994_s4: s4 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-system-load = <325000>; regulator-allow-set-load; regulator-always-on; - regulator-system-load = <325000>; }; pm8994_s5: s5 { @@ -262,13 +267,14 @@ pm8994_l2: l2 { regulator-min-microvolt = <1250000>; regulator-max-microvolt = <1250000>; - regulator-allow-set-load; regulator-system-load = <10000>; + regulator-allow-set-load; }; pm8994_l3: l3 { regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; + regulator-boot-on; }; pm8994_l4: l4 { @@ -308,8 +314,8 @@ pm8994_l12: l12 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-allow-set-load; regulator-system-load = <10000>; + regulator-allow-set-load; }; pm8994_l13: l13 { @@ -320,8 +326,9 @@ pm8994_l14: l14 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-allow-set-load; regulator-system-load = <10000>; + regulator-allow-set-load; + regulator-boot-on; }; pm8994_l15: l15 { @@ -337,44 +344,47 @@ pm8994_l17: l17 { regulator-min-microvolt = <2200000>; regulator-max-microvolt = <2200000>; + regulator-boot-on; }; pm8994_l18: l18 { regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; regulator-always-on; + regulator-boot-on; }; pm8994_l19: l19 { regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; + regulator-boot-on; }; pm8994_l20: l20 { regulator-min-microvolt = <2950000>; regulator-max-microvolt = <2950000>; - regulator-always-on; - regulator-boot-on; - regulator-allow-set-load; regulator-system-load = <570000>; + regulator-allow-set-load; }; pm8994_l21: l21 { regulator-min-microvolt = <2950000>; regulator-max-microvolt = <2950000>; - regulator-always-on; - regulator-allow-set-load; regulator-system-load = <800000>; + regulator-allow-set-load; }; pm8994_l22: l22 { regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; + regulator-boot-on; }; pm8994_l23: l23 { regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; }; pm8994_l24: l24 { @@ -385,6 +395,7 @@ pm8994_l25: l25 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; + regulator-boot-on; }; pm8994_l26: l26 { @@ -395,30 +406,33 @@ pm8994_l27: l27 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; + regulator-boot-on; }; pm8994_l28: l28 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; - regulator-allow-set-load; regulator-system-load = <10000>; + regulator-allow-set-load; }; pm8994_l29: l29 { regulator-min-microvolt = <2700000>; regulator-max-microvolt = <2700000>; + regulator-boot-on; }; pm8994_l30: l30 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-boot-on; }; pm8994_l31: l31 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; - regulator-allow-set-load; regulator-system-load = <10000>; + regulator-allow-set-load; }; pm8994_l32: l32 { @@ -426,26 +440,11 @@ regulator-max-microvolt = <1800000>; }; - pm8994_lvs1: lvs1 {}; - pm8994_lvs2: lvs2 {}; - }; - - pmi8994_regulators: pmi8994-regulators { - compatible = "qcom,rpm-pmi8994-regulators"; - - vdd_s1-supply = <&vph_pwr>; - vdd_bst_byp-supply = <&vph_pwr>; - - pmi8994_s1: s1 { - regulator-min-microvolt = <1025000>; - regulator-max-microvolt = <1025000>; + pm8994_lvs1: lvs1 { + regulator-boot-on; }; - - /* S2 & S3 - VDD_GFX */ - - pmi8994_bby: boost-bypass { - regulator-min-microvolt = <3150000>; - regulator-max-microvolt = <3600000>; + pm8994_lvs2: lvs2 { + regulator-boot-on; }; }; }; diff --git a/dts/src/arm64/qcom/msm8994.dtsi b/dts/src/arm64/qcom/msm8994.dtsi index 8c1dc5155b..0318d42c57 100644 --- a/dts/src/arm64/qcom/msm8994.dtsi +++ b/dts/src/arm64/qcom/msm8994.dtsi @@ -4,6 +4,8 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8994.h> +#include <dt-bindings/clock/qcom,mmcc-msm8994.h> +#include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/power/qcom-rpmpd.h> / { @@ -12,6 +14,11 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + mmc1 = &sdhc1; + mmc2 = &sdhc2; + }; + chosen { }; clocks { @@ -183,8 +190,8 @@ no-map; }; - cont_splash_mem: memory@3800000 { - reg = <0 0x03800000 0 0x2400000>; + cont_splash_mem: memory@3401000 { + reg = <0 0x03401000 0 0x2200000>; no-map; }; @@ -233,7 +240,6 @@ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; qcom,ipc = <&apcs 8 0>; qcom,smd-edge = <15>; - qcom,local-pid = <0>; qcom,remote-pid = <6>; rpm_requests: rpm-requests { @@ -241,7 +247,7 @@ qcom,smd-channels = "rpm_requests"; rpmcc: rpmcc { - compatible = "qcom,rpmcc-msm8994"; + compatible = "qcom,rpmcc-msm8994", "qcom,rpmcc"; #clock-cells = <1>; }; @@ -354,6 +360,15 @@ #mbox-cells = <1>; }; + watchdog@f9017000 { + compatible = "qcom,apss-wdt-msm8994", "qcom,kpss-wdt"; + reg = <0xf9017000 0x1000>; + interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>; + clocks = <&sleep_clk>; + timeout-sec = <10>; + }; + timer@f9020000 { #address-cells = <1>; #size-cells = <1>; @@ -413,7 +428,7 @@ }; usb3: usb@f92f8800 { - compatible = "qcom,msm8996-dwc3", "qcom,dwc3"; + compatible = "qcom,msm8994-dwc3", "qcom,dwc3"; reg = <0xf92f8800 0x400>; #address-cells = <1>; #size-cells = <1>; @@ -423,7 +438,10 @@ <&gcc GCC_SYS_NOC_USB3_AXI_CLK>, <&gcc GCC_USB30_SLEEP_CLK>, <&gcc GCC_USB30_MOCK_UTMI_CLK>; - clock-names = "core", "iface", "sleep", "mock_utmi", "ref", "xo"; + clock-names = "core", + "iface", + "sleep", + "mock_utmi"; assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, <&gcc GCC_USB30_MASTER_CLK>; @@ -498,7 +516,7 @@ #dma-cells = <1>; qcom,ee = <0>; qcom,controlled-remotely; - num-channels = <18>; + num-channels = <24>; qcom,num-ees = <4>; }; @@ -519,9 +537,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0xf9923000 0x500>; interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; clock-frequency = <400000>; dmas = <&blsp1_dma 12>, <&blsp1_dma 13>; dma-names = "tx", "rx"; @@ -555,9 +573,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0xf9924000 0x500>; interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; clock-frequency = <400000>; dmas = <&blsp1_dma 14>, <&blsp1_dma 15>; dma-names = "tx", "rx"; @@ -575,9 +593,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0xf9926000 0x500>; interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; clock-frequency = <400000>; dmas = <&blsp1_dma 18>, <&blsp1_dma 19>; dma-names = "tx", "rx"; @@ -593,9 +611,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0xf9927000 0x500>; interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; clock-frequency = <400000>; dmas = <&blsp2_dma 20>, <&blsp2_dma 21>; dma-names = "tx", "rx"; @@ -611,9 +629,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0xf9928000 0x500>; interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; clock-frequency = <400000>; dmas = <&blsp1_dma 22>, <&blsp1_dma 23>; dma-names = "tx", "rx"; @@ -634,7 +652,7 @@ #dma-cells = <1>; qcom,ee = <0>; qcom,controlled-remotely; - num-channels = <18>; + num-channels = <24>; qcom,num-ees = <4>; }; @@ -657,9 +675,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0xf9963000 0x500>; interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_AHB_CLK>, - <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; clock-frequency = <400000>; dmas = <&blsp2_dma 12>, <&blsp2_dma 13>; dma-names = "tx", "rx"; @@ -693,9 +711,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0xf9967000 0x500>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_AHB_CLK>, - <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; clock-frequency = <355000>; dmas = <&blsp2_dma 20>, <&blsp2_dma 21>; dma-names = "tx", "rx"; @@ -714,7 +732,7 @@ #power-domain-cells = <1>; reg = <0xfc400000 0x2000>; - clock-names = "xo", "sleep_clk"; + clock-names = "xo", "sleep"; clocks = <&xo_board>, <&sleep_clk>; }; @@ -1012,6 +1030,61 @@ drive-strength = <2>; }; }; + + mmcc: clock-controller@fd8c0000 { + compatible = "qcom,mmcc-msm8994"; + reg = <0xfd8c0000 0x5200>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + + clock-names = "xo", + "gpll0", + "mmssnoc_ahb", + "oxili_gfx3d_clk_src", + "dsi0pll", + "dsi0pllbyte", + "dsi1pll", + "dsi1pllbyte", + "hdmipll"; + clocks = <&xo_board>, + <&gcc GPLL0_OUT_MMSSCC>, + <&rpmcc RPM_SMD_MMSSNOC_AHB_CLK>, + <&rpmcc RPM_SMD_GFX3D_CLK_SRC>, + <0>, + <0>, + <0>, + <0>, + <0>; + + assigned-clocks = <&mmcc MMPLL0_PLL>, + <&mmcc MMPLL1_PLL>, + <&mmcc MMPLL3_PLL>, + <&mmcc MMPLL4_PLL>, + <&mmcc MMPLL5_PLL>; + assigned-clock-rates = <800000000>, + <1167000000>, + <1020000000>, + <960000000>, + <600000000>; + }; + + ocmem: ocmem@fdd00000 { + compatible = "qcom,msm8974-ocmem"; + reg = <0xfdd00000 0x2000>, + <0xfec00000 0x200000>; + reg-names = "ctrl", "mem"; + clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, + <&mmcc OCMEMCX_OCMEMNOC_CLK>; + clock-names = "core", "iface"; + + #address-cells = <1>; + #size-cells = <1>; + + gmu_sram: gmu-sram@0 { + reg = <0x0 0x180000>; + }; + }; }; timer: timer { diff --git a/dts/src/arm64/qcom/msm8996-mtp.dts b/dts/src/arm64/qcom/msm8996-mtp.dts index 6a1699a96c..596ad4c896 100644 --- a/dts/src/arm64/qcom/msm8996-mtp.dts +++ b/dts/src/arm64/qcom/msm8996-mtp.dts @@ -18,12 +18,10 @@ chosen { stdout-path = "serial0"; }; +}; - soc { - serial@75b0000 { - status = "okay"; - }; - }; +&blsp2_uart2 { + status = "okay"; }; &hdmi { diff --git a/dts/src/arm64/qcom/msm8996-sony-xperia-tone.dtsi b/dts/src/arm64/qcom/msm8996-sony-xperia-tone.dtsi index 3bb50cecd6..ca3c633f5a 100644 --- a/dts/src/arm64/qcom/msm8996-sony-xperia-tone.dtsi +++ b/dts/src/arm64/qcom/msm8996-sony-xperia-tone.dtsi @@ -13,9 +13,10 @@ #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/pinctrl/qcom,pmic-mpp.h> -/delete-node/ &slpi_region; -/delete-node/ &venus_region; -/delete-node/ &zap_shader_region; +/delete-node/ &adsp_mem; +/delete-node/ &slpi_mem; +/delete-node/ &venus_mem; +/delete-node/ &gpu_mem; / { qcom,msm-id = <246 0x30001>; /* MSM8996 V3.1 (Final) */ @@ -46,18 +47,23 @@ no-map; }; - zap_shader_region: gpu@90400000 { + adsp_mem: adsp@8ea00000 { + reg = <0x0 0x8ea00000 0x0 0x1a00000>; + no-map; + }; + + gpu_mem: gpu@90400000 { compatible = "shared-dma-pool"; reg = <0x0 0x90400000 0x0 0x2000>; no-map; }; - slpi_region: memory@90500000 { + slpi_mem: memory@90500000 { reg = <0 0x90500000 0 0xa00000>; no-map; }; - venus_region: memory@90f00000 { + venus_mem: memory@90f00000 { reg = <0 0x90f00000 0 0x500000>; no-map; }; diff --git a/dts/src/arm64/qcom/msm8996-xiaomi-common.dtsi b/dts/src/arm64/qcom/msm8996-xiaomi-common.dtsi index 7a9fcbe9bb..a7090befc1 100644 --- a/dts/src/arm64/qcom/msm8996-xiaomi-common.dtsi +++ b/dts/src/arm64/qcom/msm8996-xiaomi-common.dtsi @@ -66,32 +66,32 @@ /* This platform has all PIL regions offset by 0x1400000 */ /delete-node/ mpss@88800000; - mpss_region: mpss@89c00000 { + mpss_mem: mpss@89c00000 { reg = <0x0 0x89c00000 0x0 0x6200000>; no-map; }; /delete-node/ adsp@8ea00000; - adsp_region: adsp@8ea00000 { + adsp_mem: adsp@8fe00000 { reg = <0x0 0x8fe00000 0x0 0x1b00000>; no-map; }; - /delete-node/ slpi@90b00000; - slpi_region: slpi@91900000 { + /delete-node/ slpi@90500000; + slpi_mem: slpi@91900000 { reg = <0x0 0x91900000 0x0 0xa00000>; no-map; }; - /delete-node/ gpu@8f200000; - zap_shader_region: gpu@92300000 { + /delete-node/ gpu@90f00000; + gpu_mem: gpu@92300000 { compatible = "shared-dma-pool"; reg = <0x0 0x92300000 0x0 0x2000>; no-map; }; /delete-node/ venus@91000000; - venus_region: venus@90400000 { + venus_mem: venus@92400000 { reg = <0x0 0x92400000 0x0 0x500000>; no-map; }; @@ -107,7 +107,7 @@ pmsg-size = <0x40000>; }; - /delete-node/ rmtfs@86700000; + /delete-node/ rmtfs; rmtfs@f6c00000 { compatible = "qcom,rmtfs-mem"; reg = <0 0xf6c00000 0 0x200000>; @@ -118,7 +118,7 @@ }; /delete-node/ mba@91500000; - mba_region: mba@f6f00000 { + mba_mem: mba@f6f00000 { reg = <0x0 0xf6f00000 0x0 0x100000>; no-map; }; @@ -267,6 +267,12 @@ vdd-gfx-supply = <&vdd_gfx>; }; +&mss_pil { + status = "okay"; + + pll-supply = <&vreg_l12a_1p8>; +}; + &pcie0 { status = "okay"; @@ -291,24 +297,30 @@ linux,code = <KEY_VOLUMEDOWN>; }; +&slpi_pil { + status = "okay"; + + px-supply = <&vreg_lvs2a_1p8>; +}; + &usb3 { status = "okay"; extcon = <&typec>; qcom,select-utmi-as-pipe-clk; +}; - dwc3@6a00000 { - extcon = <&typec>; +&usb3_dwc3 { + extcon = <&typec>; - /* usb3-phy is not used on this device */ - phys = <&hsusb_phy1>; - phy-names = "usb2-phy"; + /* usb3-phy is not used on this device */ + phys = <&hsusb_phy1>; + phy-names = "usb2-phy"; - maximum-speed = "high-speed"; - snps,is-utmi-l1-suspend; - snps,usb2-gadget-lpm-disable; - snps,hird-threshold = /bits/ 8 <0>; - }; + maximum-speed = "high-speed"; + snps,is-utmi-l1-suspend; + snps,usb2-gadget-lpm-disable; + snps,hird-threshold = /bits/ 8 <0>; }; &hsusb_phy1 { @@ -336,13 +348,7 @@ vdda-phy-supply = <&vreg_l28a_0p925>; vdda-pll-supply = <&vreg_l12a_1p8>; - - vdda-phy-max-microamp = <18380>; - vdda-pll-max-microamp = <9440>; - vddp-ref-clk-supply = <&vreg_l25a_1p2>; - vddp-ref-clk-max-microamp = <100>; - vddp-ref-clk-always-on; }; &venus { diff --git a/dts/src/arm64/qcom/msm8996-xiaomi-gemini.dts b/dts/src/arm64/qcom/msm8996-xiaomi-gemini.dts index 34f82e06ef..22978d06f8 100644 --- a/dts/src/arm64/qcom/msm8996-xiaomi-gemini.dts +++ b/dts/src/arm64/qcom/msm8996-xiaomi-gemini.dts @@ -130,6 +130,11 @@ status = "okay"; }; +&mss_pil { + firmware-name = "qcom/msm8996/gemini/mba.mbn", + "qcom/msm8996/gemini/modem.mbn"; +}; + &q6asmdai { dai@0 { reg = <0>; @@ -144,6 +149,10 @@ }; }; +&slpi_pil { + firmware-name = "qcom/msm8996/gemini/slpi.mbn"; +}; + &sound { compatible = "qcom,apq8096-sndcard"; model = "gemini"; diff --git a/dts/src/arm64/qcom/msm8996-xiaomi-scorpio.dts b/dts/src/arm64/qcom/msm8996-xiaomi-scorpio.dts index 27a45ddbb5..1e2dd6763a 100644 --- a/dts/src/arm64/qcom/msm8996-xiaomi-scorpio.dts +++ b/dts/src/arm64/qcom/msm8996-xiaomi-scorpio.dts @@ -111,6 +111,11 @@ status = "disabled"; }; +&mss_pil { + firmware-name = "qcom/msm8996/scorpio/mba.mbn", + "qcom/msm8996/scorpio/modem.mbn"; +}; + &q6asmdai { dai@0 { reg = <0>; @@ -125,6 +130,10 @@ }; }; +&slpi_pil { + firmware-name = "qcom/msm8996/scorpio/slpi.mbn"; +}; + &sound { compatible = "qcom,apq8096-sndcard"; model = "scorpio"; diff --git a/dts/src/arm64/qcom/msm8996.dtsi b/dts/src/arm64/qcom/msm8996.dtsi index b9a48cfd76..9932186f7c 100644 --- a/dts/src/arm64/qcom/msm8996.dtsi +++ b/dts/src/arm64/qcom/msm8996.dtsi @@ -384,60 +384,65 @@ #size-cells = <2>; ranges; - mba_region: mba@91500000 { - reg = <0x0 0x91500000 0x0 0x200000>; + hyp_mem: memory@85800000 { + reg = <0x0 0x85800000 0x0 0x600000>; no-map; }; - slpi_region: slpi@90b00000 { - reg = <0x0 0x90b00000 0x0 0xa00000>; + xbl_mem: memory@85e00000 { + reg = <0x0 0x85e00000 0x0 0x200000>; no-map; }; - venus_region: venus@90400000 { - reg = <0x0 0x90400000 0x0 0x700000>; + smem_mem: smem-mem@86000000 { + reg = <0x0 0x86000000 0x0 0x200000>; no-map; }; - adsp_region: adsp@8ea00000 { - reg = <0x0 0x8ea00000 0x0 0x1a00000>; + tz_mem: memory@86200000 { + reg = <0x0 0x86200000 0x0 0x2600000>; no-map; }; - mpss_region: mpss@88800000 { - reg = <0x0 0x88800000 0x0 0x6200000>; + rmtfs_mem: rmtfs { + compatible = "qcom,rmtfs-mem"; + + size = <0x0 0x200000>; + alloc-ranges = <0x0 0xa0000000 0x0 0x2000000>; no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; }; - smem_mem: smem-mem@86000000 { - reg = <0x0 0x86000000 0x0 0x200000>; + mpss_mem: mpss@88800000 { + reg = <0x0 0x88800000 0x0 0x6200000>; no-map; }; - memory@85800000 { - reg = <0x0 0x85800000 0x0 0x800000>; + adsp_mem: adsp@8ea00000 { + reg = <0x0 0x8ea00000 0x0 0x1b00000>; no-map; }; - memory@86200000 { - reg = <0x0 0x86200000 0x0 0x2600000>; + slpi_mem: slpi@90500000 { + reg = <0x0 0x90500000 0x0 0xa00000>; no-map; }; - rmtfs@86700000 { - compatible = "qcom,rmtfs-mem"; - - size = <0x0 0x200000>; - alloc-ranges = <0x0 0xa0000000 0x0 0x2000000>; + gpu_mem: gpu@90f00000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x90f00000 0x0 0x100000>; no-map; + }; - qcom,client-id = <1>; - qcom,vmid = <15>; + venus_mem: venus@91000000 { + reg = <0x0 0x91000000 0x0 0x500000>; + no-map; }; - zap_shader_region: gpu@8f200000 { - compatible = "shared-dma-pool"; - reg = <0x0 0x90b00000 0x0 0xa00000>; + mba_mem: mba@91500000 { + reg = <0x0 0x91500000 0x0 0x200000>; no-map; }; }; @@ -456,7 +461,7 @@ qcom,glink-channels = "rpm_requests"; rpmcc: qcom,rpmcc { - compatible = "qcom,rpmcc-msm8996"; + compatible = "qcom,rpmcc-msm8996", "qcom,rpmcc"; #clock-cells = <1>; }; @@ -513,12 +518,12 @@ qcom,local-pid = <0>; qcom,remote-pid = <2>; - smp2p_adsp_out: master-kernel { + adsp_smp2p_out: master-kernel { qcom,entry-name = "master-kernel"; #qcom,smem-state-cells = <1>; }; - smp2p_adsp_in: slave-kernel { + adsp_smp2p_in: slave-kernel { qcom,entry-name = "slave-kernel"; interrupt-controller; @@ -526,7 +531,7 @@ }; }; - smp2p-modem { + smp2p-mpss { compatible = "qcom,smp2p"; qcom,smem = <435>, <428>; @@ -537,12 +542,12 @@ qcom,local-pid = <0>; qcom,remote-pid = <1>; - modem_smp2p_out: master-kernel { + mpss_smp2p_out: master-kernel { qcom,entry-name = "master-kernel"; #qcom,smem-state-cells = <1>; }; - modem_smp2p_in: slave-kernel { + mpss_smp2p_in: slave-kernel { qcom,entry-name = "slave-kernel"; interrupt-controller; @@ -561,16 +566,17 @@ qcom,local-pid = <0>; qcom,remote-pid = <3>; - smp2p_slpi_in: slave-kernel { + slpi_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + slpi_smp2p_in: slave-kernel { qcom,entry-name = "slave-kernel"; + interrupt-controller; #interrupt-cells = <2>; }; - - smp2p_slpi_out: master-kernel { - qcom,entry-name = "master-kernel"; - #qcom,smem-state-cells = <1>; - }; }; soc: soc { @@ -707,7 +713,7 @@ #thermal-sensor-cells = <1>; }; - cryptobam: dma@644000 { + cryptobam: dma-controller@644000 { compatible = "qcom,bam-v1.7.0"; reg = <0x00644000 0x24000>; interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>; @@ -788,7 +794,7 @@ reg-names = "mdp_phys"; interrupt-parent = <&mdss>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <0>; clocks = <&mmcc MDSS_AHB_CLK>, <&mmcc MDSS_AXI_CLK>, @@ -834,7 +840,7 @@ reg-names = "dsi_ctrl"; interrupt-parent = <&mdss>; - interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <4>; clocks = <&mmcc MDSS_MDP_CLK>, <&mmcc MDSS_BYTE0_CLK>, @@ -904,7 +910,7 @@ "hdcp_physical"; interrupt-parent = <&mdss>; - interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <8>; clocks = <&mmcc MDSS_MDP_CLK>, <&mmcc MDSS_AHB_CLK>, @@ -1033,7 +1039,7 @@ }; zap-shader { - memory-region = <&zap_shader_region>; + memory-region = <&gpu_mem>; }; }; @@ -1574,7 +1580,7 @@ ranges; pcie0: pcie@600000 { - compatible = "qcom,pcie-msm8996", "snps,dw-pcie"; + compatible = "qcom,pcie-msm8996"; status = "disabled"; power-domains = <&gcc PCIE0_GDSC>; bus-range = <0x00 0xff>; @@ -1626,7 +1632,7 @@ }; pcie1: pcie@608000 { - compatible = "qcom,pcie-msm8996", "snps,dw-pcie"; + compatible = "qcom,pcie-msm8996"; power-domains = <&gcc PCIE1_GDSC>; bus-range = <0x00 0xff>; num-lanes = <1>; @@ -1679,7 +1685,7 @@ }; pcie2: pcie@610000 { - compatible = "qcom,pcie-msm8996", "snps,dw-pcie"; + compatible = "qcom,pcie-msm8996"; power-domains = <&gcc PCIE2_GDSC>; bus-range = <0x00 0xff>; num-lanes = <1>; @@ -1730,7 +1736,8 @@ }; ufshc: ufshc@624000 { - compatible = "qcom,ufshc"; + compatible = "qcom,msm8996-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; reg = <0x00624000 0x2500>; interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; @@ -2026,7 +2033,7 @@ <&venus_smmu 0x2c>, <&venus_smmu 0x2d>, <&venus_smmu 0x31>; - memory-region = <&venus_region>; + memory-region = <&venus_mem>; status = "disabled"; video-decoder { @@ -2122,6 +2129,105 @@ clock-names = "iface", "bus"; }; + slpi_pil: remoteproc@1c00000 { + compatible = "qcom,msm8996-slpi-pil"; + reg = <0x01c00000 0x4000>; + + interrupts-extended = <&intc 0 390 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + clocks = <&xo_board>, + <&rpmcc RPM_SMD_AGGR2_NOC_CLK>; + clock-names = "xo", "aggre2"; + + memory-region = <&slpi_mem>; + + qcom,smem-states = <&slpi_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + power-domains = <&rpmpd MSM8996_VDDSSCX>; + power-domain-names = "ssc_cx"; + + status = "disabled"; + + smd-edge { + interrupts = <GIC_SPI 176 IRQ_TYPE_EDGE_RISING>; + + label = "dsps"; + mboxes = <&apcs_glb 25>; + qcom,smd-edge = <3>; + qcom,remote-pid = <3>; + }; + }; + + mss_pil: remoteproc@2080000 { + compatible = "qcom,msm8996-mss-pil"; + reg = <0x2080000 0x100>, + <0x2180000 0x020>; + reg-names = "qdsp6", "rmb"; + + interrupts-extended = <&intc 0 448 IRQ_TYPE_EDGE_RISING>, + <&mpss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&mpss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&mpss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&mpss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&mpss_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack", + "shutdown-ack"; + + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, + <&gcc GCC_BOOT_ROM_AHB_CLK>, + <&xo_board>, + <&gcc GCC_MSS_GPLL0_DIV_CLK>, + <&gcc GCC_MSS_SNOC_AXI_CLK>, + <&gcc GCC_MSS_MNOC_BIMC_AXI_CLK>, + <&rpmcc RPM_SMD_PCNOC_CLK>, + <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "iface", "bus", "mem", "xo", "gpll0_mss", + "snoc_axi", "mnoc_axi", "pnoc", "qdss"; + + resets = <&gcc GCC_MSS_RESTART>; + reset-names = "mss_restart"; + + power-domains = <&rpmpd MSM8996_VDDCX>, + <&rpmpd MSM8996_VDDMX>; + power-domain-names = "cx", "mx"; + + qcom,smem-states = <&mpss_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>; + + status = "disabled"; + + mba { + memory-region = <&mba_mem>; + }; + + mpss { + memory-region = <&mpss_mem>; + }; + + smd-edge { + interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>; + + label = "mpss"; + mboxes = <&apcs_glb 12>; + qcom,smd-edge = <0>; + qcom,remote-pid = <1>; + }; + }; + stm@3002000 { compatible = "arm,coresight-stm", "arm,primecell"; reg = <0x3002000 0x1000>, @@ -2612,11 +2718,15 @@ interrupt-names = "hs_phy_irq", "ss_phy_irq"; clocks = <&gcc GCC_SYS_NOC_USB3_AXI_CLK>, - <&gcc GCC_USB30_MASTER_CLK>, - <&gcc GCC_AGGRE2_USB3_AXI_CLK>, - <&gcc GCC_USB30_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_SLEEP_CLK>, - <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>; + <&gcc GCC_USB30_MASTER_CLK>, + <&gcc GCC_AGGRE2_USB3_AXI_CLK>, + <&gcc GCC_USB30_SLEEP_CLK>, + <&gcc GCC_USB30_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, <&gcc GCC_USB30_MASTER_CLK>; @@ -2625,7 +2735,7 @@ power-domains = <&gcc USB30_GDSC>; status = "disabled"; - usb3_dwc3: dwc3@6a00000 { + usb3_dwc3: usb@6a00000 { compatible = "snps,dwc3"; reg = <0x06a00000 0xcc00>; interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>; @@ -2786,9 +2896,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x07577000 0x1000>; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&blsp1_i2c3_default>; pinctrl-1 = <&blsp1_i2c3_sleep>; @@ -2834,9 +2944,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x075b5000 0x1000>; interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_AHB_CLK>, - <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&blsp2_i2c1_default>; pinctrl-1 = <&blsp2_i2c1_sleep>; @@ -2851,9 +2961,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x075b6000 0x1000>; interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_AHB_CLK>, - <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&blsp2_i2c2_default>; pinctrl-1 = <&blsp2_i2c2_sleep>; @@ -2868,9 +2978,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x075b7000 0x1000>; interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_AHB_CLK>, - <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; clock-frequency = <400000>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&blsp2_i2c3_default>; @@ -2886,9 +2996,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x75b9000 0x1000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_AHB_CLK>, - <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default"; pinctrl-0 = <&blsp2_i2c5_default>; dmas = <&blsp2_dma 20>, <&blsp2_dma 21>; @@ -2902,9 +3012,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x75ba000 0x1000>; interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_AHB_CLK>, - <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&blsp2_i2c6_default>; pinctrl-1 = <&blsp2_i2c6_sleep>; @@ -2944,6 +3054,11 @@ <&gcc GCC_USB20_MOCK_UTMI_CLK>, <&gcc GCC_USB20_SLEEP_CLK>, <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>, <&gcc GCC_USB20_MASTER_CLK>; @@ -2953,7 +3068,7 @@ qcom,select-utmi-as-pipe-clk; status = "disabled"; - dwc3@7600000 { + usb2_dwc3: usb@7600000 { compatible = "snps,dwc3"; reg = <0x07600000 0xcc00>; interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>; @@ -3023,19 +3138,19 @@ reg = <0x09300000 0x80000>; interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>, - <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, - <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, - <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, - <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; clocks = <&rpmcc RPM_SMD_BB_CLK1>; clock-names = "xo"; - memory-region = <&adsp_region>; + memory-region = <&adsp_mem>; - qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-states = <&adsp_smp2p_out 0>; qcom,smem-state-names = "stop"; power-domains = <&rpmpd MSM8996_VDDCX>; diff --git a/dts/src/arm64/qcom/msm8998-oneplus-common.dtsi b/dts/src/arm64/qcom/msm8998-oneplus-common.dtsi index 9823d48a91..dbaea360bf 100644 --- a/dts/src/arm64/qcom/msm8998-oneplus-common.dtsi +++ b/dts/src/arm64/qcom/msm8998-oneplus-common.dtsi @@ -188,6 +188,23 @@ }; }; +&blsp1_i2c6 { + status = "okay"; + + nfc@28 { + compatible = "nxp,nxp-nci-i2c"; + reg = <0x28>; + + interrupt-parent = <&tlmm>; + interrupts = <92 IRQ_TYPE_LEVEL_HIGH>; + + enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&nfc_int_active &nfc_enable_active>; + }; +}; + &blsp1_uart3 { status = "okay"; @@ -462,6 +479,20 @@ drive-strength = <8>; bias-pull-up; }; + + nfc_int_active: nfc-int-active { + pins = "gpio92"; + function = "gpio"; + drive-strength = <6>; + bias-pull-up; + }; + + nfc_enable_active: nfc-enable-active { + pins = "gpio12", "gpio116"; + function = "gpio"; + drive-strength = <6>; + bias-pull-up; + }; }; &ufshc { diff --git a/dts/src/arm64/qcom/msm8998.dtsi b/dts/src/arm64/qcom/msm8998.dtsi index 2fda21e810..758c45bbbe 100644 --- a/dts/src/arm64/qcom/msm8998.dtsi +++ b/dts/src/arm64/qcom/msm8998.dtsi @@ -815,6 +815,21 @@ clock-names = "xo", "sleep_clk"; clocks = <&xo>, <&sleep_clk>; + + /* + * The hypervisor typically configures the memory region where these clocks + * reside as read-only for the HLOS. If the HLOS tried to enable or disable + * these clocks on a device with such configuration (e.g. because they are + * enabled but unused during boot-up), the device will most likely decide + * to reboot. + * In light of that, we are conservative here and we list all such clocks + * as protected. The board dts (or a user-supplied dts) can override the + * list of protected clocks if it differs from the norm, and it is in fact + * desired for the HLOS to manage these clocks + */ + protected-clocks = <AGGRE2_SNOC_NORTH_AXI>, + <SSC_XO>, + <SSC_CNOC_AHBS_CLK>; }; rpm_msg_ram: sram@778000 { @@ -2008,10 +2023,13 @@ clocks = <&gcc GCC_CFG_NOC_USB3_AXI_CLK>, <&gcc GCC_USB30_MASTER_CLK>, <&gcc GCC_AGGRE1_USB3_AXI_CLK>, - <&gcc GCC_USB30_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_SLEEP_CLK>; - clock-names = "cfg_noc", "core", "iface", "mock_utmi", - "sleep"; + <&gcc GCC_USB30_SLEEP_CLK>, + <&gcc GCC_USB30_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, <&gcc GCC_USB30_MASTER_CLK>; @@ -2025,7 +2043,7 @@ resets = <&gcc GCC_USB_30_BCR>; - usb3_dwc3: dwc3@a800000 { + usb3_dwc3: usb@a800000 { compatible = "snps,dwc3"; reg = <0x0a800000 0xcd00>; interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; diff --git a/dts/src/arm64/qcom/pm8350.dtsi b/dts/src/arm64/qcom/pm8350.dtsi index 308f9ca7c7..b10f33afa5 100644 --- a/dts/src/arm64/qcom/pm8350.dtsi +++ b/dts/src/arm64/qcom/pm8350.dtsi @@ -6,6 +6,30 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> +/ { + thermal-zones { + pm8350_thermal: pm8350c-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pm8350_temp_alarm>; + + trips { + pm8350_trip0: trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + pm8350_crit: pm8350c-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + &spmi_bus { pm8350: pmic@1 { compatible = "qcom,pm8350", "qcom,spmi-pmic"; @@ -13,6 +37,13 @@ #address-cells = <1>; #size-cells = <0>; + pm8350_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + pm8350_gpios: gpio@8800 { compatible = "qcom,pm8350-gpio"; reg = <0x8800>; diff --git a/dts/src/arm64/qcom/pm8350b.dtsi b/dts/src/arm64/qcom/pm8350b.dtsi index b23bb1d49a..f1d1d4c8ed 100644 --- a/dts/src/arm64/qcom/pm8350b.dtsi +++ b/dts/src/arm64/qcom/pm8350b.dtsi @@ -6,6 +6,30 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> +/ { + thermal-zones { + pm8350b_thermal: pm8350c-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pm8350b_temp_alarm>; + + trips { + pm8350b_trip0: trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + pm8350b_crit: pm8350c-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + &spmi_bus { pm8350b: pmic@3 { compatible = "qcom,pm8350b", "qcom,spmi-pmic"; @@ -13,6 +37,13 @@ #address-cells = <1>; #size-cells = <0>; + pm8350b_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x3 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + pm8350b_gpios: gpio@8800 { compatible = "qcom,pm8350b-gpio"; reg = <0x8800>; diff --git a/dts/src/arm64/qcom/pm8350c.dtsi b/dts/src/arm64/qcom/pm8350c.dtsi index e1b75ae0a8..e0bbb67717 100644 --- a/dts/src/arm64/qcom/pm8350c.dtsi +++ b/dts/src/arm64/qcom/pm8350c.dtsi @@ -29,26 +29,35 @@ interrupt-controller; #interrupt-cells = <2>; }; + + pm8350c_pwm: pwm@e800 { + compatible = "qcom,pm8350c-pwm"; + reg = <0xe800>; + #pwm-cells = <2>; + status = "disabled"; + }; }; }; -&thermal_zones { - pm8350c_thermal: pm8350c-thermal { - polling-delay-passive = <100>; - polling-delay = <0>; - thermal-sensors = <&pm8350c_temp_alarm>; - - trips { - pm8350c_trip0: trip0 { - temperature = <95000>; - hysteresis = <0>; - type = "passive"; - }; +/ { + thermal-zones { + pm8350c_thermal: pm8350c-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pm8350c_temp_alarm>; + + trips { + pm8350c_trip0: trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; - pm8350c_crit: pm8350c-crit { - temperature = <115000>; - hysteresis = <0>; - type = "critical"; + pm8350c_crit: pm8350c-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; }; }; }; diff --git a/dts/src/arm64/qcom/pm8450.dtsi b/dts/src/arm64/qcom/pm8450.dtsi new file mode 100644 index 0000000000..ae5bce3cf4 --- /dev/null +++ b/dts/src/arm64/qcom/pm8450.dtsi @@ -0,0 +1,59 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Linaro Limited + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +/ { + thermal-zones { + pm8450-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pm8450_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + }; +}; + + +&spmi_bus { + pm8450: pmic@7 { + compatible = "qcom,pm8450", "qcom,spmi-pmic"; + reg = <0x7 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8450_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x7 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pm8450_gpios: gpio@8800 { + compatible = "qcom,pm8450-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pm8450_gpios 0 0 4>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/dts/src/arm64/qcom/pmr735a.dtsi b/dts/src/arm64/qcom/pmr735a.dtsi index b4b6ba24f8..febda50779 100644 --- a/dts/src/arm64/qcom/pmr735a.dtsi +++ b/dts/src/arm64/qcom/pmr735a.dtsi @@ -32,23 +32,25 @@ }; }; -&thermal_zones { - pmr735a_thermal: pmr735a-thermal { - polling-delay-passive = <100>; - polling-delay = <0>; - thermal-sensors = <&pmr735a_temp_alarm>; +/ { + thermal-zones { + pmr735a_thermal: pmr735a-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pmr735a_temp_alarm>; - trips { - pmr735a_trip0: trip0 { - temperature = <95000>; - hysteresis = <0>; - type = "passive"; - }; + trips { + pmr735a_trip0: trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; - pmr735a_crit: pmr735a-crit { - temperature = <115000>; - hysteresis = <0>; - type = "critical"; + pmr735a_crit: pmr735a-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; }; }; }; diff --git a/dts/src/arm64/qcom/pmr735b.dtsi b/dts/src/arm64/qcom/pmr735b.dtsi index 1144086280..6043241886 100644 --- a/dts/src/arm64/qcom/pmr735b.dtsi +++ b/dts/src/arm64/qcom/pmr735b.dtsi @@ -6,6 +6,30 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> +/ { + thermal-zones { + pmr735a_thermal: pmr735a-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pmr735b_temp_alarm>; + + trips { + pmr735b_trip0: trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + pmr735b_crit: pmr735a-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + &spmi_bus { pmr735b: pmic@5 { compatible = "qcom,pmr735b", "qcom,spmi-pmic"; @@ -13,6 +37,13 @@ #address-cells = <1>; #size-cells = <0>; + pmr735b_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x5 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + pmr735b_gpios: gpio@8800 { compatible = "qcom,pmr735b-gpio"; reg = <0x8800>; diff --git a/dts/src/arm64/qcom/qcs404-evb.dtsi b/dts/src/arm64/qcom/qcs404-evb.dtsi index a80c578484..2f3104a844 100644 --- a/dts/src/arm64/qcom/qcs404-evb.dtsi +++ b/dts/src/arm64/qcom/qcs404-evb.dtsi @@ -337,9 +337,10 @@ &usb3 { status = "okay"; - dwc3@7580000 { - dr_mode = "host"; - }; +}; + +&usb3_dwc3 { + dr_mode = "host"; }; &usb2_phy_prim { diff --git a/dts/src/arm64/qcom/qcs404.dtsi b/dts/src/arm64/qcom/qcs404.dtsi index 3f06f7cd3c..d912166b75 100644 --- a/dts/src/arm64/qcom/qcs404.dtsi +++ b/dts/src/arm64/qcom/qcs404.dtsi @@ -226,7 +226,7 @@ qcom,glink-channels = "rpm_requests"; rpmcc: clock-controller { - compatible = "qcom,rpmcc-qcs404"; + compatible = "qcom,rpmcc-qcs404", "qcom,rpmcc"; #clock-cells = <1>; }; @@ -529,7 +529,7 @@ }; usb3: usb@7678800 { - compatible = "qcom,dwc3"; + compatible = "qcom,qcs404-dwc3", "qcom,dwc3"; reg = <0x07678800 0x400>; #address-cells = <1>; #size-cells = <1>; @@ -544,7 +544,7 @@ assigned-clock-rates = <19200000>, <200000000>; status = "disabled"; - dwc3@7580000 { + usb3_dwc3: usb@7580000 { compatible = "snps,dwc3"; reg = <0x07580000 0xcd00>; interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; @@ -558,7 +558,7 @@ }; usb2: usb@79b8800 { - compatible = "qcom,dwc3"; + compatible = "qcom,qcs404-dwc3", "qcom,dwc3"; reg = <0x079b8800 0x400>; #address-cells = <1>; #size-cells = <1>; @@ -573,7 +573,7 @@ assigned-clock-rates = <19200000>, <133333333>; status = "disabled"; - dwc3@78c0000 { + usb@78c0000 { compatible = "snps,dwc3"; reg = <0x078c0000 0xcc00>; interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; @@ -823,8 +823,8 @@ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_UART0_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; - dmas = <&blsp1_dma 1>, <&blsp1_dma 0>; - dma-names = "rx", "tx"; + dmas = <&blsp1_dma 0>, <&blsp1_dma 1>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&blsp1_uart0_default>; status = "disabled"; @@ -836,8 +836,8 @@ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; - dmas = <&blsp1_dma 3>, <&blsp1_dma 2>; - dma-names = "rx", "tx"; + dmas = <&blsp1_dma 2>, <&blsp1_dma 3>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&blsp1_uart1_default>; status = "disabled"; @@ -849,8 +849,8 @@ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; - dmas = <&blsp1_dma 5>, <&blsp1_dma 4>; - dma-names = "rx", "tx"; + dmas = <&blsp1_dma 4>, <&blsp1_dma 5>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&blsp1_uart2_default>; status = "okay"; @@ -903,8 +903,8 @@ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; - dmas = <&blsp1_dma 7>, <&blsp1_dma 6>; - dma-names = "rx", "tx"; + dmas = <&blsp1_dma 6>, <&blsp1_dma 7>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&blsp1_uart3_default>; status = "disabled"; @@ -914,9 +914,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x078b5000 0x600>; interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP0_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP0_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default"; pinctrl-0 = <&blsp1_i2c0_default>; #address-cells = <1>; @@ -928,9 +928,9 @@ compatible = "qcom,spi-qup-v2.2.1"; reg = <0x078b5000 0x600>; interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP0_SPI_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP0_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default"; pinctrl-0 = <&blsp1_spi0_default>; #address-cells = <1>; @@ -942,9 +942,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x078b6000 0x600>; interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default"; pinctrl-0 = <&blsp1_i2c1_default>; #address-cells = <1>; @@ -956,9 +956,9 @@ compatible = "qcom,spi-qup-v2.2.1"; reg = <0x078b6000 0x600>; interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default"; pinctrl-0 = <&blsp1_spi1_default>; #address-cells = <1>; @@ -970,9 +970,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x078b7000 0x600>; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default"; pinctrl-0 = <&blsp1_i2c2_default>; #address-cells = <1>; @@ -984,9 +984,9 @@ compatible = "qcom,spi-qup-v2.2.1"; reg = <0x078b7000 0x600>; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default"; pinctrl-0 = <&blsp1_spi2_default>; #address-cells = <1>; @@ -998,9 +998,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x078b8000 0x600>; interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default"; pinctrl-0 = <&blsp1_i2c3_default>; #address-cells = <1>; @@ -1012,9 +1012,9 @@ compatible = "qcom,spi-qup-v2.2.1"; reg = <0x078b8000 0x600>; interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default"; pinctrl-0 = <&blsp1_spi3_default>; #address-cells = <1>; @@ -1026,9 +1026,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x078b9000 0x600>; interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default"; pinctrl-0 = <&blsp1_i2c4_default>; #address-cells = <1>; @@ -1040,9 +1040,9 @@ compatible = "qcom,spi-qup-v2.2.1"; reg = <0x078b9000 0x600>; interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default"; pinctrl-0 = <&blsp1_spi4_default>; #address-cells = <1>; @@ -1067,8 +1067,8 @@ interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP2_UART0_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; - dmas = <&blsp2_dma 1>, <&blsp2_dma 0>; - dma-names = "rx", "tx"; + dmas = <&blsp2_dma 0>, <&blsp2_dma 1>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&blsp2_uart0_default>; status = "disabled"; @@ -1078,9 +1078,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x07af5000 0x600>; interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_AHB_CLK>, - <&gcc GCC_BLSP2_QUP0_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP2_QUP0_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default"; pinctrl-0 = <&blsp2_i2c0_default>; #address-cells = <1>; @@ -1092,9 +1092,9 @@ compatible = "qcom,spi-qup-v2.2.1"; reg = <0x07af5000 0x600>; interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_AHB_CLK>, - <&gcc GCC_BLSP2_QUP0_SPI_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP2_QUP0_SPI_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default"; pinctrl-0 = <&blsp2_spi0_default>; #address-cells = <1>; diff --git a/dts/src/arm64/qcom/qrb5165-rb5.dts b/dts/src/arm64/qcom/qrb5165-rb5.dts index 845eb7a6bf..0e63f707b9 100644 --- a/dts/src/arm64/qcom/qrb5165-rb5.dts +++ b/dts/src/arm64/qcom/qrb5165-rb5.dts @@ -29,7 +29,7 @@ }; /* Fixed crystal oscillator dedicated to MCP2518FD */ - clk40M: can_clock { + clk40M: can-clock { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <40000000>; diff --git a/dts/src/arm64/qcom/sa8155p-adp.dts b/dts/src/arm64/qcom/sa8155p-adp.dts index 8756c2b25c..ba547ca9fc 100644 --- a/dts/src/arm64/qcom/sa8155p-adp.dts +++ b/dts/src/arm64/qcom/sa8155p-adp.dts @@ -47,6 +47,29 @@ vin-supply = <&vreg_3p3>; }; + + mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <1>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + snps,route-up; + snps,priority = <0x1>; + }; + }; + + mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <1>; + snps,tx-sched-wrr; + + queue0 { + snps,weight = <0x10>; + snps,dcb-algorithm; + snps,priority = <0x0>; + }; + }; }; &apps_rsc { @@ -303,6 +326,44 @@ }; }; +ðernet { + status = "okay"; + + snps,reset-gpio = <&tlmm 79 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 11000 70000>; + + snps,ptp-ref-clk-rate = <250000000>; + snps,ptp-req-clk-rate = <96000000>; + + snps,mtl-rx-config = <&mtl_rx_setup>; + snps,mtl-tx-config = <&mtl_tx_setup>; + + pinctrl-names = "default"; + pinctrl-0 = <ðernet_defaults>; + + phy-handle = <&rgmii_phy>; + phy-mode = "rgmii"; + max-speed = <1000>; + + mdio { + #address-cells = <0x1>; + #size-cells = <0x0>; + + compatible = "snps,dwmac-mdio"; + + /* Micrel KSZ9031RNZ PHY */ + rgmii_phy: phy@7 { + reg = <0x7>; + + interrupt-parent = <&tlmm>; + interrupts-extended = <&tlmm 124 IRQ_TYPE_EDGE_FALLING>; /* phy intr */ + device_type = "ethernet-phy"; + compatible = "ethernet-phy-ieee802.3-c22"; + }; + }; +}; + &qupv3_id_1 { status = "okay"; }; @@ -317,6 +378,20 @@ firmware-name = "qcom/sa8155p/cdsp.mdt"; }; +&sdhc_2 { + status = "okay"; + + cd-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; + vqmmc-supply = <&vreg_l13c_2p96>; /* IO line power */ + vmmc-supply = <&vreg_l17a_2p96>; /* Card power line */ + bus-width = <4>; + no-sdio; + no-emmc; +}; + &uart2 { status = "okay"; }; @@ -387,9 +462,78 @@ vdda-pll-supply = <&vdda_usb_ss_dp_core_1>; }; +&pcie0 { + status = "okay"; +}; + +&pcie0_phy { + status = "okay"; + vdda-phy-supply = <&vreg_l18c_0p88>; + vdda-pll-supply = <&vreg_l8c_1p2>; +}; + +&pcie1_phy { + vdda-phy-supply = <&vreg_l18c_0p88>; + vdda-pll-supply = <&vreg_l8c_1p2>; +}; + &tlmm { gpio-reserved-ranges = <0 4>; + sdc2_on: sdc2_on { + clk { + pins = "sdc2_clk"; + bias-disable; /* No pull */ + drive-strength = <16>; /* 16 MA */ + }; + + cmd { + pins = "sdc2_cmd"; + bias-pull-up; /* pull up */ + drive-strength = <16>; /* 16 MA */ + }; + + data { + pins = "sdc2_data"; + bias-pull-up; /* pull up */ + drive-strength = <16>; /* 16 MA */ + }; + + sd-cd { + pins = "gpio96"; + function = "gpio"; + bias-pull-up; /* pull up */ + drive-strength = <2>; /* 2 MA */ + }; + }; + + sdc2_off: sdc2_off { + clk { + pins = "sdc2_clk"; + bias-disable; /* No pull */ + drive-strength = <2>; /* 2 MA */ + }; + + cmd { + pins = "sdc2_cmd"; + bias-pull-up; /* pull up */ + drive-strength = <2>; /* 2 MA */ + }; + + data { + pins = "sdc2_data"; + bias-pull-up; /* pull up */ + drive-strength = <2>; /* 2 MA */ + }; + + sd-cd { + pins = "gpio96"; + function = "gpio"; + bias-pull-up; /* pull up */ + drive-strength = <2>; /* 2 MA */ + }; + }; + usb2phy_ac_en1_default: usb2phy_ac_en1_default { mux { pins = "gpio113"; @@ -407,4 +551,53 @@ drive-strength = <2>; }; }; + + ethernet_defaults: ethernet-defaults { + mdc { + pins = "gpio7"; + function = "rgmii"; + bias-pull-up; + }; + + mdio { + pins = "gpio59"; + function = "rgmii"; + bias-pull-up; + }; + + rgmii-rx { + pins = "gpio117", "gpio118", "gpio119", "gpio120", "gpio115", "gpio116"; + function = "rgmii"; + bias-disable; + drive-strength = <2>; + }; + + rgmii-tx { + pins = "gpio122", "gpio4", "gpio5", "gpio6", "gpio114", "gpio121"; + function = "rgmii"; + bias-pull-up; + drive-strength = <16>; + }; + + phy-intr { + pins = "gpio124"; + function = "emac_phy"; + bias-disable; + drive-strength = <8>; + }; + + pps { + pins = "gpio81"; + function = "emac_pps"; + bias-disable; + drive-strength = <8>; + }; + + phy-reset { + pins = "gpio79"; + function = "gpio"; + bias-pull-up; + drive-strength = <16>; + }; + }; }; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-coachz.dtsi b/dts/src/arm64/qcom/sc7180-trogdor-coachz.dtsi index c81805ef22..8ac1f1e610 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor-coachz.dtsi +++ b/dts/src/arm64/qcom/sc7180-trogdor-coachz.dtsi @@ -5,15 +5,10 @@ * Copyright 2020 Google LLC. */ -#include "sc7180.dtsi" - -ap_ec_spi: &spi6 {}; -ap_h1_spi: &spi0 {}; - #include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-ti-sn65dsi86.dtsi" -/* Deleted nodes from trogdor.dtsi */ +/* Deleted nodes from sc7180-trogdor.dtsi */ /delete-node/ &alc5682; /delete-node/ &pp3300_codec; @@ -111,10 +106,6 @@ ap_ts_pen_1v8: &i2c4 { }; }; -&i2c7 { - status = "disabled"; -}; - &i2c9 { status = "disabled"; }; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-homestar-r2.dts b/dts/src/arm64/qcom/sc7180-trogdor-homestar-r2.dts index 70032983fb..d9e905ed4e 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor-homestar-r2.dts +++ b/dts/src/arm64/qcom/sc7180-trogdor-homestar-r2.dts @@ -7,7 +7,7 @@ /dts-v1/; -#include "sc7180.dtsi" +#include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-ti-sn65dsi86.dtsi" #include "sc7180-trogdor-homestar.dtsi" diff --git a/dts/src/arm64/qcom/sc7180-trogdor-homestar-r3.dts b/dts/src/arm64/qcom/sc7180-trogdor-homestar-r3.dts index e92e2e9e48..242c178fdc 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor-homestar-r3.dts +++ b/dts/src/arm64/qcom/sc7180-trogdor-homestar-r3.dts @@ -7,7 +7,7 @@ /dts-v1/; -#include "sc7180.dtsi" +#include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-ti-sn65dsi86.dtsi" #include "sc7180-trogdor-homestar.dtsi" diff --git a/dts/src/arm64/qcom/sc7180-trogdor-homestar-r4.dts b/dts/src/arm64/qcom/sc7180-trogdor-homestar-r4.dts index 0de0c97f57..66dd870162 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor-homestar-r4.dts +++ b/dts/src/arm64/qcom/sc7180-trogdor-homestar-r4.dts @@ -7,7 +7,7 @@ /dts-v1/; -#include "sc7180.dtsi" +#include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-parade-ps8640.dtsi" #include "sc7180-trogdor-homestar.dtsi" diff --git a/dts/src/arm64/qcom/sc7180-trogdor-homestar.dtsi b/dts/src/arm64/qcom/sc7180-trogdor-homestar.dtsi index bff2b556cc..9b3e3d13c1 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor-homestar.dtsi +++ b/dts/src/arm64/qcom/sc7180-trogdor-homestar.dtsi @@ -5,9 +5,6 @@ * Copyright 2021 Google LLC. */ -ap_ec_spi: &spi6 {}; -ap_h1_spi: &spi0 {}; - #include "sc7180-trogdor.dtsi" / { @@ -88,10 +85,6 @@ ap_h1_spi: &spi0 {}; }; }; -&ap_tp_i2c { - status = "disabled"; -}; - ap_ts_pen_1v8: &i2c4 { status = "okay"; clock-frequency = <400000>; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts b/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts index f360ff2722..235cda2bba 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts +++ b/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts @@ -7,7 +7,7 @@ /dts-v1/; -#include "sc7180.dtsi" +#include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-ti-sn65dsi86.dtsi" #include "sc7180-trogdor-lazor.dtsi" #include "sc7180-trogdor-lte-sku.dtsi" diff --git a/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts b/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts index 4e35aec6a1..913b5fc3ba 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts +++ b/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts @@ -7,7 +7,7 @@ /dts-v1/; -#include "sc7180.dtsi" +#include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-parade-ps8640.dtsi" #include "sc7180-trogdor-lazor.dtsi" #include "sc7180-trogdor-lte-sku.dtsi" @@ -20,7 +20,7 @@ /delete-node/&ap_ts; &panel { - compatible = "innolux,n116bca-ea1", "innolux,n116bge"; + compatible = "edp-panel"; }; &sdhc_2 { diff --git a/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen-r4.dts b/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen-r4.dts index 42b4bbcc76..d42dcd4211 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen-r4.dts +++ b/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen-r4.dts @@ -7,7 +7,7 @@ /dts-v1/; -#include "sc7180.dtsi" +#include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-ti-sn65dsi86.dtsi" #include "sc7180-trogdor-lazor.dtsi" #include "sc7180-trogdor-lte-sku.dtsi" diff --git a/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen-r9.dts b/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen-r9.dts index dc47842bc6..15d77dc5f9 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen-r9.dts +++ b/dts/src/arm64/qcom/sc7180-trogdor-lazor-limozeen-r9.dts @@ -7,7 +7,7 @@ /dts-v1/; -#include "sc7180.dtsi" +#include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-parade-ps8640.dtsi" #include "sc7180-trogdor-lazor.dtsi" #include "sc7180-trogdor-lte-sku.dtsi" diff --git a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r0.dts b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r0.dts index b142006478..bfbf26fd2c 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r0.dts +++ b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r0.dts @@ -7,7 +7,7 @@ /dts-v1/; -#include "sc7180.dtsi" +#include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-ti-sn65dsi86.dtsi" #include "sc7180-trogdor-lazor.dtsi" diff --git a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r1-lte.dts b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r1-lte.dts index e16ba7b01f..eb20157f6a 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r1-lte.dts +++ b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r1-lte.dts @@ -13,10 +13,6 @@ compatible = "google,lazor-rev1-sku0", "google,lazor-rev2-sku0", "qcom,sc7180"; }; -&ap_sar_sensor { - status = "okay"; -}; - &ap_sar_sensor_i2c { status = "okay"; }; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r1.dts b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r1.dts index 59740799fa..d45a59afd7 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r1.dts +++ b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r1.dts @@ -7,7 +7,7 @@ /dts-v1/; -#include "sc7180.dtsi" +#include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-ti-sn65dsi86.dtsi" #include "sc7180-trogdor-lazor.dtsi" diff --git a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r3-kb.dts b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r3-kb.dts index 18ef9da719..6ff81c1f7c 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r3-kb.dts +++ b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r3-kb.dts @@ -7,7 +7,7 @@ /dts-v1/; -#include "sc7180.dtsi" +#include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-ti-sn65dsi86.dtsi" #include "sc7180-trogdor-lazor.dtsi" #include "sc7180-lite.dtsi" diff --git a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r3-lte.dts b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r3-lte.dts index c5c9feff41..e58e36e359 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r3-lte.dts +++ b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r3-lte.dts @@ -7,7 +7,7 @@ /dts-v1/; -#include "sc7180.dtsi" +#include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-ti-sn65dsi86.dtsi" #include "sc7180-trogdor-lazor.dtsi" #include "sc7180-trogdor-lte-sku.dtsi" @@ -20,10 +20,6 @@ "qcom,sc7180"; }; -&ap_sar_sensor { - status = "okay"; -}; - &ap_sar_sensor_i2c { status = "okay"; }; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r3.dts b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r3.dts index 7adcedbf08..76c83f88cb 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r3.dts +++ b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r3.dts @@ -7,7 +7,7 @@ /dts-v1/; -#include "sc7180.dtsi" +#include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-ti-sn65dsi86.dtsi" #include "sc7180-trogdor-lazor.dtsi" #include "sc7180-lite.dtsi" diff --git a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r9-kb.dts b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r9-kb.dts index 7f5c015e1e..960f7b7ce0 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r9-kb.dts +++ b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r9-kb.dts @@ -7,7 +7,7 @@ /dts-v1/; -#include "sc7180.dtsi" +#include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-parade-ps8640.dtsi" #include "sc7180-trogdor-lazor.dtsi" #include "sc7180-lite.dtsi" diff --git a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r9-lte.dts b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r9-lte.dts index 344b57c035..38027f13b9 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r9-lte.dts +++ b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r9-lte.dts @@ -7,7 +7,7 @@ /dts-v1/; -#include "sc7180.dtsi" +#include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-parade-ps8640.dtsi" #include "sc7180-trogdor-lazor.dtsi" #include "sc7180-trogdor-lte-sku.dtsi" @@ -17,10 +17,6 @@ compatible = "google,lazor-sku0", "qcom,sc7180"; }; -&ap_sar_sensor { - status = "okay"; -}; - &ap_sar_sensor_i2c { status = "okay"; }; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r9.dts b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r9.dts index 83f6a4eb5a..56dd222650 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor-lazor-r9.dts +++ b/dts/src/arm64/qcom/sc7180-trogdor-lazor-r9.dts @@ -7,7 +7,7 @@ /dts-v1/; -#include "sc7180.dtsi" +#include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-parade-ps8640.dtsi" #include "sc7180-trogdor-lazor.dtsi" #include "sc7180-lite.dtsi" diff --git a/dts/src/arm64/qcom/sc7180-trogdor-lazor.dtsi b/dts/src/arm64/qcom/sc7180-trogdor-lazor.dtsi index 69666f9217..fe2369c29a 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor-lazor.dtsi +++ b/dts/src/arm64/qcom/sc7180-trogdor-lazor.dtsi @@ -5,9 +5,6 @@ * Copyright 2020 Google LLC. */ -ap_ec_spi: &spi6 {}; -ap_h1_spi: &spi0 {}; - #include "sc7180-trogdor.dtsi" &ap_sar_sensor { @@ -19,6 +16,10 @@ ap_h1_spi: &spi0 {}; semtech,avg-pos-strength = <64>; }; +&ap_tp_i2c { + status = "okay"; +}; + /* * Lazor is stuffed with a 47k NTC as charger thermistor which currently is * not supported by the PM6150 ADC driver. Disable the charger thermal zone diff --git a/dts/src/arm64/qcom/sc7180-trogdor-pompom.dtsi b/dts/src/arm64/qcom/sc7180-trogdor-pompom.dtsi index e47c74e513..3df4920295 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor-pompom.dtsi +++ b/dts/src/arm64/qcom/sc7180-trogdor-pompom.dtsi @@ -5,11 +5,6 @@ * Copyright 2020 Google LLC. */ -#include "sc7180.dtsi" - -ap_ec_spi: &spi6 {}; -ap_h1_spi: &spi0 {}; - #include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-ti-sn65dsi86.dtsi" @@ -36,6 +31,10 @@ ap_h1_spi: &spi0 {}; realtek,dmic-clk-driving-high; }; +&ap_tp_i2c { + status = "okay"; +}; + &cpu6_alert0 { temperature = <60000>; }; diff --git a/dts/src/arm64/qcom/sc7180-trogdor-r1.dts b/dts/src/arm64/qcom/sc7180-trogdor-r1.dts index 457c254998..352827e574 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor-r1.dts +++ b/dts/src/arm64/qcom/sc7180-trogdor-r1.dts @@ -7,11 +7,6 @@ /dts-v1/; -#include "sc7180.dtsi" - -ap_ec_spi: &spi6 {}; -ap_h1_spi: &spi0 {}; - #include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-ti-sn65dsi86.dtsi" @@ -20,6 +15,10 @@ ap_h1_spi: &spi0 {}; compatible = "google,trogdor", "qcom,sc7180"; }; +&ap_tp_i2c { + status = "okay"; +}; + ap_ts_pen_1v8: &i2c4 { status = "okay"; clock-frequency = <400000>; diff --git a/dts/src/arm64/qcom/sc7180-trogdor.dtsi b/dts/src/arm64/qcom/sc7180-trogdor.dtsi index 732e1181af..e55dbaa6dc 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor.dtsi +++ b/dts/src/arm64/qcom/sc7180-trogdor.dtsi @@ -11,7 +11,8 @@ #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include <dt-bindings/sound/sc7180-lpass.h> -/* PMICs depend on spmi_bus label and so must come after SoC */ +#include "sc7180.dtsi" +/* PMICs depend on spmi_bus label and so must come after sc7180.dtsi */ #include "pm6150.dtsi" #include "pm6150l.dtsi" @@ -626,7 +627,7 @@ }; }; -&ap_ec_spi { +ap_ec_spi: &spi6 { status = "okay"; cros_ec: ec@0 { compatible = "google,cros-ec-spi"; @@ -675,7 +676,7 @@ }; }; -&ap_h1_spi { +ap_h1_spi: &spi0 { status = "okay"; cr50: tpm@0 { compatible = "google,cr50"; @@ -722,13 +723,11 @@ ap_sar_sensor_i2c: &i2c5 { vdd-supply = <&pp3300_a>; svdd-supply = <&pp1800_prox>; - status = "disabled"; label = "proximity-wifi"; }; }; ap_tp_i2c: &i2c7 { - status = "okay"; clock-frequency = <400000>; trackpad: trackpad@15 { diff --git a/dts/src/arm64/qcom/sc7180.dtsi b/dts/src/arm64/qcom/sc7180.dtsi index e1c46b80f1..5dcaac23a1 100644 --- a/dts/src/arm64/qcom/sc7180.dtsi +++ b/dts/src/arm64/qcom/sc7180.dtsi @@ -1421,13 +1421,6 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; - ipa_virt: interconnect@1e00000 { - compatible = "qcom,sc7180-ipa-virt"; - reg = <0 0x01e00000 0 0x1000>; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - ipa: ipa@1e40000 { compatible = "qcom,sc7180-ipa"; @@ -2762,10 +2755,13 @@ clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>, <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, - <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_PRIM_SLEEP_CLK>; - clock-names = "cfg_noc", "core", "iface", "mock_utmi", - "sleep"; + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>; @@ -2786,7 +2782,7 @@ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3 0>; interconnect-names = "usb-ddr", "apps-usb"; - usb_1_dwc3: dwc3@a600000 { + usb_1_dwc3: usb@a600000 { compatible = "snps,dwc3"; reg = <0 0x0a600000 0 0xe000>; interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; @@ -3522,7 +3518,7 @@ }; }; - apps_bcm_voter: bcm_voter { + apps_bcm_voter: bcm-voter { compatible = "qcom,bcm-voter"; }; }; diff --git a/dts/src/arm64/qcom/sc7280-crd.dts b/dts/src/arm64/qcom/sc7280-crd-r3.dts index e2efbdde53..344338ad8a 100644 --- a/dts/src/arm64/qcom/sc7280-crd.dts +++ b/dts/src/arm64/qcom/sc7280-crd-r3.dts @@ -11,8 +11,11 @@ #include "sc7280-idp-ec-h1.dtsi" / { - model = "Qualcomm Technologies, Inc. sc7280 CRD platform"; - compatible = "qcom,sc7280-crd", "google,hoglin", "qcom,sc7280"; + model = "Qualcomm Technologies, Inc. sc7280 CRD platform (rev3 - 4)"; + compatible = "qcom,sc7280-crd", + "google,hoglin-rev3", "google,hoglin-rev4", + "google,piglin-rev3", "google,piglin-rev4", + "qcom,sc7280"; aliases { serial0 = &uart5; diff --git a/dts/src/arm64/qcom/sc7280-herobrine-crd.dts b/dts/src/arm64/qcom/sc7280-herobrine-crd.dts new file mode 100644 index 0000000000..a4ac33c4fd --- /dev/null +++ b/dts/src/arm64/qcom/sc7280-herobrine-crd.dts @@ -0,0 +1,365 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * sc7280 CRD 3+ board device tree source + * + * Copyright 2022 Google LLC. + */ + +/dts-v1/; + +#include "sc7280-herobrine.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. sc7280 CRD platform (rev5+)"; + compatible = "google,hoglin", "qcom,sc7280"; + + /* FIXED REGULATORS */ + + /* + * On most herobrine boards PPVAR_SYS directly provides VREG_EDP_BL. + * However, on CRD there's an extra regulator in the way. Since this + * is expected to be uncommon, we'll leave the "vreg_edp_bl" label + * in the baseboard herobrine.dtsi point at "ppvar_sys" and then + * make a "_crd" specific version here. + */ + vreg_edp_bl_crd: vreg-edp-bl-crd-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_edp_bl_crd"; + + gpio = <&pm8350c_gpios 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&edp_bl_reg_en>; + + vin-supply = <&ppvar_sys>; + }; +}; + +/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ + +&apps_rsc { + pmg1110-regulators { + compatible = "qcom,pmg1110-rpmh-regulators"; + qcom,pmic-id = "k"; + + vreg_s1k_1p0: smps1 { + regulator-min-microvolt = <1010000>; + regulator-max-microvolt = <1170000>; + }; + }; +}; + +ap_tp_i2c: &i2c0 { + status = "okay"; + clock-frequency = <400000>; + + trackpad: trackpad@15 { + compatible = "hid-over-i2c"; + reg = <0x15>; + pinctrl-names = "default"; + pinctrl-0 = <&tp_int_odl>; + + interrupt-parent = <&tlmm>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + + post-power-on-delay-ms = <20>; + hid-descr-addr = <0x0001>; + vdd-supply = <&pp3300_z1>; + + wakeup-source; + }; +}; + +&ap_sar_sensor_i2c { + status = "okay"; +}; + +&ap_sar_sensor0 { + status = "okay"; +}; + +&ap_sar_sensor1 { + status = "okay"; +}; + +ap_ts_pen_1v8: &i2c13 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@5c { + compatible = "hid-over-i2c"; + reg = <0x5c>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_conn>, <&ts_rst_conn>; + + interrupt-parent = <&tlmm>; + interrupts = <55 IRQ_TYPE_LEVEL_LOW>; + + post-power-on-delay-ms = <500>; + hid-descr-addr = <0x0000>; + + vdd-supply = <&pp3300_left_in_mlb>; + }; +}; + +&mdss_edp { + status = "okay"; +}; + +&mdss_edp_phy { + status = "okay"; +}; + +/* For nvme */ +&pcie1 { + status = "okay"; +}; + +/* For nvme */ +&pcie1_phy { + status = "okay"; +}; + +&pm8350c_pwm_backlight { + power-supply = <&vreg_edp_bl_crd>; +}; + +/* For eMMC */ +&sdhc_1 { + status = "okay"; +}; + +/* For SD Card */ +&sdhc_2 { + status = "okay"; +}; + +/* PINCTRL - BOARD-SPECIFIC */ + +/* + * Methodology for gpio-line-names: + * - If a pin goes to CRD board and is named it gets that name. + * - If a pin goes to CRD board and is not named, it gets no name. + * - If a pin is totally internal to Qcard then it gets Qcard name. + * - If a pin is not hooked up on Qcard, it gets no name. + */ + +&pm8350c_gpios { + gpio-line-names = "FLASH_STROBE_1", /* 1 */ + "AP_SUSPEND", + "PM8008_1_RST_N", + "", + "", + "EDP_BL_REG_EN", + "PMIC_EDP_BL_EN", + "PMIC_EDP_BL_PWM", + ""; + + edp_bl_reg_en: edp-bl-reg-en { + pins = "gpio6"; + function = "normal"; + bias-disable; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + }; +}; + +&tlmm { + gpio-line-names = "AP_TP_I2C_SDA", /* 0 */ + "AP_TP_I2C_SCL", + "PCIE1_RESET_N", + "PCIE1_WAKE_N", + "APPS_I2C_SDA", + "APPS_I2C_SCL", + "", + "TPAD_INT_N", + "", + "", + + "GNSS_L1_EN", /* 10 */ + "GNSS_L5_EN", + "QSPI_DATA_0", + "QSPI_DATA_1", + "QSPI_CLK", + "QSPI_CS_N_1", + /* + * AP_FLASH_WP is crossystem ABI. Schematics call it + * BIOS_FLASH_WP_L (the '_L' suffix is misleading, the + * signal is active high). + */ + "AP_FLASH_WP", + "", + "AP_EC_INT_N", + "", + + "CAM0_RST_N", /* 20 */ + "CAM1_RST_N", + "SM_DBG_UART_TX", + "SM_DBG_UART_RX", + "", + "PM8008_IRQ_1", + "HOST2WLAN_SOL", + "WLAN2HOST_SOL", + "MOS_BT_UART_CTS", + "MOS_BT_UART_RFR", + + "MOS_BT_UART_TX", /* 30 */ + "MOS_BT_UART_RX", + "", + "HUB_RST", + "", + "", + "", + "", + "", + "", + + "EC_SPI_MISO_GPIO40", /* 40 */ + "EC_SPI_MOSI_GPIO41", + "EC_SPI_CLK_GPIO42", + "EC_SPI_CS_GPIO43", + "", + "EARLY_EUD_EN", + "", + "DP_HOT_PLUG_DETECT", + "AP_BRD_ID_0", + "AP_BRD_ID_1", + + "AP_BRD_ID_2", /* 50 */ + "NVME_PWR_REG_EN", + "TS_I2C_SDA_CONN", + "TS_I2C_CLK_CONN", + "TS_RST_CONN", + "TS_INT_CONN", + "AP_I2C_TPM_SDA", + "AP_I2C_TPM_SCL", + "", + "", + + "EDP_HOT_PLUG_DET_N", /* 60 */ + "", + "", + "AMP_EN", + "CAM0_MCLK_GPIO_64", + "CAM1_MCLK_GPIO_65", + "", + "", + "", + "CCI_I2C_SDA0", + + "CCI_I2C_SCL0", /* 70 */ + "", + "", + "", + "", + "", + "", + "", + "", + "PCIE1_CLK_REQ_N", + + "EN_PP3300_DX_EDP", /* 80 */ + "US_EURO_HS_SEL", + "FORCED_USB_BOOT", + "WCD_RESET_N", + "MOS_WLAN_EN", + "MOS_BT_EN", + "MOS_SW_CTRL", + "MOS_PCIE0_RST", + "MOS_PCIE0_CLKREQ_N", + "MOS_PCIE0_WAKE_N", + + "MOS_LAA_AS_EN", /* 90 */ + "SD_CARD_DET_CONN", + "", + "", + "MOS_BT_WLAN_SLIMBUS_CLK", + "MOS_BT_WLAN_SLIMBUS_DAT0", + "", + "", + "", + "", + + "", /* 100 */ + "", + "", + "", + "H1_AP_INT_N", + "", + "AMP_BCLK", + "AMP_DIN", + "AMP_LRCLK", + "UIM1_DATA_GPIO_109", + + "UIM1_CLK_GPIO_110", /* 110 */ + "UIM1_RESET_GPIO_111", + "", + "UIM1_DATA", + "UIM1_CLK", + "UIM1_RESET", + "UIM1_PRESENT", + "SDM_RFFE0_CLK", + "SDM_RFFE0_DATA", + "", + + "SDM_RFFE1_DATA", /* 120 */ + "SC_GPIO_121", + "FASTBOOT_SEL_1", + "SC_GPIO_123", + "FASTBOOT_SEL_2", + "SM_RFFE4_CLK_GRFC_8", + "SM_RFFE4_DATA_GRFC_9", + "WLAN_COEX_UART1_RX", + "WLAN_COEX_UART1_TX", + "", + + "", /* 130 */ + "", + "", + "SDR_QLINK_REQ", + "SDR_QLINK_EN", + "QLINK0_WMSS_RESET_N", + "SMR526_QLINK1_REQ", + "SMR526_QLINK1_EN", + "SMR526_QLINK1_WMSS_RESET_N", + "", + + "SAR1_INT_N", /* 140 */ + "SAR0_INT_N", + "", + "", + "WCD_SWR_TX_CLK", + "WCD_SWR_TX_DATA0", + "WCD_SWR_TX_DATA1", + "WCD_SWR_RX_CLK", + "WCD_SWR_RX_DATA0", + "WCD_SWR_RX_DATA1", + + "DMIC01_CLK", /* 150 */ + "DMIC01_DATA", + "DMIC23_CLK", + "DMIC23_DATA", + "", + "", + "EC_IN_RW_N", + "EN_PP3300_HUB", + "WCD_SWR_TX_DATA2", + "", + + "", /* 160 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + + "", /* 170 */ + "MOS_BLE_UART_TX", + "MOS_BLE_UART_RX", + "", + "", + ""; +}; diff --git a/dts/src/arm64/qcom/sc7280-herobrine-herobrine-r0.dts b/dts/src/arm64/qcom/sc7280-herobrine-herobrine-r0.dts deleted file mode 100644 index 1779d96c30..0000000000 --- a/dts/src/arm64/qcom/sc7280-herobrine-herobrine-r0.dts +++ /dev/null @@ -1,1352 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Herobrine board device tree source - * - * Copyright 2021 Google LLC. - */ - -/dts-v1/; - -#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> -#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h> -#include <dt-bindings/input/gpio-keys.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> -#include <dt-bindings/regulator/qcom,rpmh-regulator.h> - -#include "sc7280.dtsi" - -/* PMICs depend on spmi_bus label and so must come after SoC */ -#include "pm7325.dtsi" -#include "pm8350c.dtsi" -#include "pmk8350.dtsi" - -#include "sc7280-chrome-common.dtsi" - -/ { - model = "Google Herobrine (rev0)"; - compatible = "google,herobrine-rev0", "qcom,sc7280"; -}; - -/ { - aliases { - serial0 = &uart5; - serial1 = &uart7; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - /* FIXED REGULATORS - parents above children */ - - /* This is the top level supply and variable voltage */ - ppvar_sys: ppvar-sys-regulator { - compatible = "regulator-fixed"; - regulator-name = "ppvar_sys"; - regulator-always-on; - regulator-boot-on; - }; - - /* This divides ppvar_sys by 2, so voltage is variable */ - src_vph_pwr: src-vph-pwr-regulator { - compatible = "regulator-fixed"; - regulator-name = "src_vph_pwr"; - - /* EC turns on with switchcap_on; always on for AP */ - regulator-always-on; - regulator-boot-on; - - vin-supply = <&ppvar_sys>; - }; - - pp5000_s3: pp5000-s3-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp5000_s3"; - - /* EC turns on with en_pp5000_s3; always on for AP */ - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - vin-supply = <&ppvar_sys>; - }; - - pp3300_z1: pp3300-z1-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp3300_z1"; - - /* EC turns on with en_pp3300_z1; always on for AP */ - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - vin-supply = <&ppvar_sys>; - }; - - pp3300_audio: - pp3300_codec: pp3300-codec-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp3300_codec"; - - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>; - enable-active-high; - pinctrl-names = "default"; - pinctrl-0 = <&en_pp3300_codec>; - - vin-supply = <&pp3300_z1>; - }; - - pp3300_cam: - pp3300_edp: - pp3300_ts: pp3300-edp-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp3300_edp"; - - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&tlmm 80 GPIO_ACTIVE_HIGH>; - enable-active-high; - pinctrl-names = "default"; - pinctrl-0 = <&en_pp3300_dx_edp>; - - vin-supply = <&pp3300_z1>; - }; - - pp3300_fp: - pp3300_fp_ls: - pp3300_mcu: pp3300-fp-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp3300_fp"; - - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - regulator-boot-on; - regulator-always-on; - - /* - * WARNING: it is intentional that GPIO 42 isn't listed here. - * The userspace script for updating the fingerprint firmware - * needs to control the FP regulators during a FW update, - * hence the signal can't be owned by the kernel regulator. - */ - - pinctrl-names = "default"; - pinctrl-0 = <&en_fp_rails>; - - vin-supply = <&pp3300_z1>; - }; - - pp3300_hub: pp3300-hub-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp3300_hub"; - - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - regulator-boot-on; - regulator-always-on; - - gpio = <&tlmm 24 GPIO_ACTIVE_HIGH>; - enable-active-high; - pinctrl-names = "default"; - pinctrl-0 = <&en_pp3300_hub>; - - vin-supply = <&pp3300_z1>; - }; - - pp3300_tp: pp3300-tp-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp3300_tp"; - - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - /* AP turns on with PP1800_L18B_S0; always on for AP */ - regulator-always-on; - regulator-boot-on; - - vin-supply = <&pp3300_z1>; - }; - - pp2850_uf_cam: pp2850-uf-cam-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp2850_uf_cam"; - - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - - gpio = <&tlmm 6 GPIO_ACTIVE_HIGH>; - enable-active-high; - pinctrl-names = "default"; - pinctrl-0 = <&uf_cam_en>; - - vin-supply = <&pp3300_cam>; - }; - - pp2850_vcm_wf_cam: pp2850-vcm-wf-cam-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp2850_vcm_wf_cam"; - - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - - gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>; - enable-active-high; - pinctrl-names = "default"; - pinctrl-0 = <&wf_cam_en>; - - vin-supply = <&pp3300_cam>; - }; - - pp2850_wf_cam: pp2850-wf-cam-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp2850_wf_cam"; - - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - - gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>; - enable-active-high; - /* - * The pinconf can only be referenced once so we put it on the - * first regulator and comment it out here. - * - * pinctrl-names = "default"; - * pinctrl-0 = <&wf_cam_en>; - */ - - vin-supply = <&pp3300_cam>; - }; - - pp1800_fp: pp1800-fp-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp1800_fp"; - - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - regulator-always-on; - - /* - * WARNING: it is intentional that GPIO 42 isn't listed here. - * The userspace script for updating the fingerprint firmware - * needs to control the FP regulators during a FW update, - * hence the signal can't be owned by the kernel regulator. - */ - - pinctrl-names = "default"; - pinctrl-0 = <&en_fp_rails>; - - vin-supply = <&pp1800_l18b_s0>; - status = "disabled"; - }; - - pp1800_uf_cam: pp1800-uf-cam-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp1800_uf_cam"; - - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - gpio = <&tlmm 6 GPIO_ACTIVE_HIGH>; - enable-active-high; - /* - * The pinconf can only be referenced once so we put it on the - * first regulator and comment it out here. - * - * pinctrl-names = "default"; - * pinctrl-0 = <&uf_cam_en>; - */ - - vin-supply = <&pp1800_l19b>; - }; - - pp1800_wf_cam: pp1800-wf-cam-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp1800_wf_cam"; - - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>; - enable-active-high; - /* - * The pinconf can only be referenced once so we put it on the - * first regulator and comment it out here. - * - * pinctrl-names = "default"; - * pinctrl-0 = <&wf_cam_en>; - */ - - vin-supply = <&pp1800_l19b>; - }; - - pp1200_wf_cam: pp1200-wf-cam-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp1200_wf_cam"; - - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - - gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>; - enable-active-high; - /* - * The pinconf can only be referenced once so we put it on the - * first regulator and comment it out here. - * - * pinctrl-names = "default"; - * pinctrl-0 = <&wf_cam_en>; - */ - - vin-supply = <&pp1200_l6b>; - }; - - /* BOARD-SPECIFIC TOP LEVEL NODES */ - - gpio_keys: gpio-keys { - compatible = "gpio-keys"; - status = "disabled"; - pinctrl-names = "default"; - pinctrl-0 = <&pen_pdct_l>; - - pen_insert: pen-insert { - label = "Pen Insert"; - - /* Insert = low, eject = high */ - gpios = <&tlmm 39 GPIO_ACTIVE_LOW>; - linux,code = <SW_PEN_INSERTED>; - linux,input-type = <EV_SW>; - wakeup-event-action = <EV_ACT_DEASSERTED>; - wakeup-source; - }; - }; - - pwmleds { - compatible = "pwm-leds"; - status = "disabled"; - keyboard_backlight: keyboard-backlight { - status = "disabled"; - label = "cros_ec::kbd_backlight"; - pwms = <&cros_ec_pwm 0>; - max-brightness = <1023>; - }; - }; -}; - -&apps_rsc { - pm7325-regulators { - compatible = "qcom,pm7325-rpmh-regulators"; - qcom,pmic-id = "b"; - - vdd19_pmu_pcie_i: - vdd19_pmu_rfa_i: - vreg_s1b_wlan: - vreg_s1b: smps1 { - regulator-min-microvolt = <1856000>; - regulator-max-microvolt = <2040000>; - }; - - vdd_pmu_aon_i: - vreg_s7b_wlan: - vreg_s7b: smps7 { - regulator-min-microvolt = <535000>; - regulator-max-microvolt = <1120000>; - }; - - vdd13_pmu_pcie_i: - vdd13_pmu_rfa_i: - vreg_s8b_wlan: - vreg_s8b: smps8 { - regulator-min-microvolt = <1256000>; - regulator-max-microvolt = <1500000>; - }; - - vdda_usb_ss_dp_core: - vreg_l1b: ldo1 { - regulator-min-microvolt = <825000>; - regulator-max-microvolt = <925000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vdda_usb_hs0_3p1: - vreg_l2b: ldo2 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <3544000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pp1200_l6b: - vdd_ufs_1p2: - vdd_vref: - vdda_csi01_1p2: - vdda_csi23_1p2: - vdda_csi4_1p2: - vdda_dsi0_1p2: - vdda_pcie0_1p2: - vdda_pcie1_1p2: - vdda_usb_ss_dp_1p2: - vdda_qlink0_1p2_ck: - vdda_qlink1_1p2_ck: - vreg_l6b_1p2: - vreg_l6b: ldo6 { - regulator-min-microvolt = <1120000>; - regulator-max-microvolt = <1408000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pp2950_l7b: - vreg_l7b: ldo7 { - regulator-min-microvolt = <2960000>; - regulator-max-microvolt = <2960000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - codec_vcc: - pp1800_l18b_s0: - pp1800_ts: - vdd1: - vddpx_0: - vddpx_3: - vddpx_7: - vreg_l18b: ldo18 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2000000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pp1800_l19b: - vddpx_ts: - vddpx_wl4otp: - vreg_l19b: ldo19 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - }; - - pm8350c-regulators { - compatible = "qcom,pm8350c-rpmh-regulators"; - qcom,pmic-id = "c"; - - vreg_s1c: smps1 { - regulator-min-microvolt = <2190000>; - regulator-max-microvolt = <2210000>; - }; - - vddpx_1: - vreg_s9c: smps9 { - regulator-min-microvolt = <1010000>; - regulator-max-microvolt = <1170000>; - }; - - pp1800_l1c: - pp1800_pen: - vdd_a_gfx_cs_1p1: - vdd_a_cxo_1p8: - vdd_qfprom: - vdda_apc_cs_1p8: - vdda_qrefs_1p8: - vdda_turing_q6_cs_1p8: - vdda_usb_hs0_1p8: - vreg_l1c: ldo1 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1980000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - dmic_vdd: - pp1800_alc5682: - pp1800_l2c: - pp1800_vreg_alc5682: - vreg_l2c: ldo2 { - regulator-min-microvolt = <1620000>; - regulator-max-microvolt = <1980000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pp3300_sar: - pp3300_sensor: - vreg_l3c: ldo3 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <3540000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - ppvar_uim1: - vddpx_5: - vreg_l4c: ldo4 { - regulator-min-microvolt = <1620000>; - regulator-max-microvolt = <3300000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pp2950_l5c: - uim_vcc: - vddpx_6: - vreg_l5c: ldo5 { - regulator-min-microvolt = <1620000>; - regulator-max-microvolt = <3300000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - ppvar_l6c: - vddpx_2: - vreg_l6c: ldo6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l7c: ldo7 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3544000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pp1800_prox: - pp1800_sar: - vreg_l8c: ldo8 { - regulator-min-microvolt = <1620000>; - regulator-max-microvolt = <2000000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pp2950_l9c: - vreg_l9c: ldo9 { - regulator-min-microvolt = <2960000>; - regulator-max-microvolt = <2960000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vdd_a_gnss_0p9: - vdd_ufs_core: - vdd_usb_hs0_core: - vdd_vref_0p9: - vdda_csi01_0p9: - vdda_csi23_0p9: - vdda_csi4_0p9: - vdda_dsi0_pll_0p9: - vdda_dsi0_0p9: - vdda_pcie0_core: - vdda_pcie1_core: - vdda_qlink0_0p9: - vdda_qlink1_0p9: - vdda_qlink0_0p9_ck: - vdda_qlink1_0p9_ck: - vdda_qrefs_0p875: - vreg_l10c_0p8: - vreg_l10c: ldo10 { - regulator-min-microvolt = <720000>; - regulator-max-microvolt = <1050000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pp2800_l11c: - vreg_l11c: ldo11 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <3544000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pp1800_l12c: - vreg_l12c: ldo12 { - regulator-min-microvolt = <1650000>; - regulator-max-microvolt = <2000000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pp3300_l13c: - vreg_l13c: ldo13 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <3544000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_bob: bob { - regulator-min-microvolt = <3008000>; - regulator-max-microvolt = <3960000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; - }; - }; -}; - -ap_tp_i2c: &i2c1 { - status = "okay"; - clock-frequency = <400000>; - - trackpad: trackpad@15 { - compatible = "elan,ekth3000"; - reg = <0x15>; - pinctrl-names = "default"; - pinctrl-0 = <&tp_int_odl>; - - interrupt-parent = <&tlmm>; - interrupts = <102 IRQ_TYPE_EDGE_FALLING>; - - vcc-supply = <&pp3300_z1>; - - wakeup-source; - }; -}; - -ap_h1_i2c: &i2c12 { - status = "okay"; - clock-frequency = <400000>; - - tpm@50 { - compatible = "google,cr50"; - reg = <0x50>; - - pinctrl-names = "default"; - pinctrl-0 = <&h1_ap_int_odl>; - - interrupt-parent = <&tlmm>; - interrupts = <54 IRQ_TYPE_EDGE_RISING>; - }; -}; - -ap_ts_pen: &i2c13 { - status = "okay"; - clock-frequency = <400000>; - - ap_ts: touchscreen@10 { - compatible = "hid-over-i2c"; - reg = <0x10>; - pinctrl-names = "default"; - pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; - - interrupt-parent = <&tlmm>; - interrupts = <81 IRQ_TYPE_LEVEL_LOW>; - - post-power-on-delay-ms = <20>; - hid-descr-addr = <0x0001>; - - vdd-supply = <&pp3300_ts>; - }; -}; - -&pm7325_gpios { - status = "disabled"; /* No GPIOs are connected */ -}; - -&pmk8350_gpios { - status = "disabled"; /* No GPIOs are connected */ -}; - -&pmk8350_rtc { - status = "disabled"; -}; - -&pmk8350_vadc { - pmk8350_die_temp { - reg = <PMK8350_ADC7_DIE_TEMP>; - label = "pmk8350_die_temp"; - qcom,pre-scaling = <1 1>; - }; - - pmr735a_die_temp { - reg = <PMR735A_ADC7_DIE_TEMP>; - label = "pmr735a_die_temp"; - qcom,pre-scaling = <1 1>; - }; -}; - -&qfprom { - vcc-supply = <&vdd_qfprom>; -}; - -&qupv3_id_0 { - status = "okay"; -}; - -&qupv3_id_1 { - status = "okay"; -}; - -&sdhc_1 { - status = "okay"; - - vmmc-supply = <&pp2950_l7b>; - vqmmc-supply = <&pp1800_l19b>; -}; - -&sdhc_2 { - status = "okay"; - - pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>, <&sd_cd>; - pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>, <&sd_cd>; - vmmc-supply = <&pp2950_l9c>; - vqmmc-supply = <&ppvar_l6c>; - - cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>; -}; - -ap_ec_spi: &spi8 { - status = "okay"; - - pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs_gpio_init_high>, <&qup_spi8_cs_gpio>; - cs-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; - - cros_ec: ec@0 { - compatible = "google,cros-ec-spi"; - reg = <0>; - interrupt-parent = <&tlmm>; - interrupts = <142 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&ap_ec_int_l>; - spi-max-frequency = <3000000>; - - cros_ec_pwm: pwm { - compatible = "google,cros-ec-pwm"; - #pwm-cells = <1>; - }; - - i2c_tunnel: i2c-tunnel { - compatible = "google,cros-ec-i2c-tunnel"; - google,remote-bus = <0>; - #address-cells = <1>; - #size-cells = <0>; - }; - - typec { - compatible = "google,cros-ec-typec"; - #address-cells = <1>; - #size-cells = <0>; - - usb_c0: connector@0 { - compatible = "usb-c-connector"; - reg = <0>; - label = "left"; - power-role = "dual"; - data-role = "host"; - try-power-role = "source"; - }; - - usb_c1: connector@1 { - compatible = "usb-c-connector"; - reg = <1>; - label = "right"; - power-role = "dual"; - data-role = "host"; - try-power-role = "source"; - }; - }; - }; -}; - -#include <arm/cros-ec-keyboard.dtsi> -#include <arm/cros-ec-sbs.dtsi> - -&keyboard_controller { - function-row-physmap = < - MATRIX_KEY(0x00, 0x02, 0) /* T1 */ - MATRIX_KEY(0x03, 0x02, 0) /* T2 */ - MATRIX_KEY(0x02, 0x02, 0) /* T3 */ - MATRIX_KEY(0x01, 0x02, 0) /* T4 */ - MATRIX_KEY(0x03, 0x04, 0) /* T5 */ - MATRIX_KEY(0x02, 0x04, 0) /* T6 */ - MATRIX_KEY(0x01, 0x04, 0) /* T7 */ - MATRIX_KEY(0x02, 0x09, 0) /* T8 */ - MATRIX_KEY(0x01, 0x09, 0) /* T9 */ - MATRIX_KEY(0x00, 0x04, 0) /* T10 */ - >; - linux,keymap = < - MATRIX_KEY(0x00, 0x02, KEY_BACK) - MATRIX_KEY(0x03, 0x02, KEY_REFRESH) - MATRIX_KEY(0x02, 0x02, KEY_ZOOM) - MATRIX_KEY(0x01, 0x02, KEY_SCALE) - MATRIX_KEY(0x03, 0x04, KEY_SYSRQ) - MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN) - MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP) - MATRIX_KEY(0x02, 0x09, KEY_MUTE) - MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN) - MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP) - - CROS_STD_MAIN_KEYMAP - >; -}; - -&uart5 { - compatible = "qcom,geni-debug-uart"; - status = "okay"; -}; - -&uart7 { - status = "okay"; -}; - -&usb_1 { - status = "okay"; -}; - -&usb_1_dwc3 { - dr_mode = "host"; -}; - -&usb_1_hsphy { - status = "okay"; - - vdda-pll-supply = <&vdd_usb_hs0_core>; - vdda33-supply = <&vdda_usb_hs0_3p1>; - vdda18-supply = <&vdda_usb_hs0_1p8>; -}; - -&usb_1_qmpphy { - status = "okay"; - - vdda-phy-supply = <&vdda_usb_ss_dp_1p2>; - vdda-pll-supply = <&vdda_usb_ss_dp_core>; -}; - -&usb_2 { - status = "okay"; -}; - -&usb_2_dwc3 { - dr_mode = "host"; -}; - -&usb_2_hsphy { - status = "okay"; - - vdda-pll-supply = <&vdd_usb_hs0_core>; - vdda33-supply = <&vdda_usb_hs0_3p1>; - vdda18-supply = <&vdda_usb_hs0_1p8>; -}; - -/* PINCTRL - additions to nodes defined in sc7280.dtsi */ - -&dp_hot_plug_det { - bias-disable; -}; - -&pcie1_clkreq_n { - bias-pull-up; - drive-strength = <2>; -}; - -&qspi_cs0 { - bias-disable; -}; - -&qspi_clk { - bias-disable; -}; - -&qspi_data01 { - /* High-Z when no transfers; nice to park the lines */ - bias-pull-up; -}; - -&qup_uart5_rx { - drive-strength = <2>; - bias-pull-up; -}; - -&qup_uart5_tx { - drive-strength = <2>; - bias-disable; -}; - -&qup_uart7_cts { - /* - * Configure a pull-down on CTS to match the pull of - * the Bluetooth module. - */ - bias-pull-down; -}; - -&qup_uart7_rts { - /* We'll drive RTS, so no pull */ - drive-strength = <2>; - bias-disable; -}; - -&qup_uart7_tx { - /* We'll drive TX, so no pull */ - drive-strength = <2>; - bias-disable; -}; - -&qup_uart7_rx { - /* - * Configure a pull-up on RX. This is needed to avoid - * garbage data when the TX pin of the Bluetooth module is - * in tri-state (module powered off or not driving the - * signal yet). - */ - bias-pull-up; -}; - -&sdc1_clk { - bias-disable; - drive-strength = <16>; -}; - -&sdc1_cmd { - bias-pull-up; - drive-strength = <10>; -}; - -&sdc1_data { - bias-pull-up; - drive-strength = <10>; -}; - -&sdc1_rclk { - bias-pull-down; -}; - -&sdc2_clk { - bias-disable; - drive-strength = <16>; -}; - -&sdc2_cmd { - bias-pull-up; - drive-strength = <10>; -}; - -&sdc2_data { - bias-pull-up; - drive-strength = <10>; -}; - -/* PINCTRL - board-specific pinctrl */ - -&pm8350c_gpios { - gpio-line-names = "AP_SUSPEND", - "", - "", - "AP_BL_EN", - "", - "SD_CD_ODL", - "", - "", - "AP_BL_PWM"; - - ap_bl_en: ap-bl-en { - pins = "gpio4"; - function = "normal"; - qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; - bias-disable; - - /* Force backlight to be disabled to match state at boot. */ - output-low; - }; -}; - -&tlmm { - gpio-line-names = "HP_I2C_SDA", /* 0 */ - "HP_I2C_SCL", - "SSD_RST_L", - "PE_WAKE_ODL", - "AP_TP_I2C_SDA", - "AP_TP_I2C_SCL", - "UF_CAM_EN", - "WF_CAM_EN", - "AP_SAR_SENSOR_SDA", - "AP_SAR_SENSOR_SCL", - - "", /* 10 */ - "", - "AP_SPI_MOSI", - "AP_SPI_MISO", - "AP_SPI_CLK", - "AP_SPI_CS0_L", - "", - "", - "EDP_HPD", - "", - - "UF_CAM_RST_L", /* 20 */ - "WF_CAM_RST_L", - "UART_AP_TX_DBG_RX", - "UART_DBG_TX_AP_RX", - "EN_PP3300_HUB", - "", - "HOST2WLAN_SOL", - "WLAN2HOST_SOL", - "BT_UART_CTS", - "BT_UART_RTS", - - "BT_UART_TXD", /* 30 */ - "BT_UART_RXD", - "AP_EC_SPI_MISO", - "AP_EC_SPI_MOSI", - "AP_EC_SPI_CLK", - "AP_EC_SPI_CS_L", - "", - "", - "", - "PEN_PDCT_L", - - "IO_BRD_ID0", /* 40 */ - "IO_BRD_ID1", - "EN_FP_RAILS", - "PEN_IRQ_L", - "AP_SPI_FP_MISO", - "AP_SPI_FP_MOSI", - "AP_SPI_FP_CLK", - "AP_SPI_FP_CS_L", - "AP_H1_SPI_MISO", - "AP_H1_SPI_MOSI", - - "AP_H1_SPI_CLK", /* 50 */ - "AP_H1_SPI_CS_L", - "AP_TS_PEN_I2C_SDA", - "AP_TS_PEN_I2C_SCL", - "H1_AP_INT_ODL", - "", - "LCM_RST_1V8_L", - "AMP_EN", - "", - "DP_HOT_PLUG_DET", - - "HUB_RST_L", /* 60 */ - "FP_TO_AP_IRQ_L", - "", - "", - "UF_CAM_MCLK", - "WF_CAM_MCLK", - "IO_BRD_ID2", - "EN_PP3300_CODEC", - "EC_IN_RW_ODL", - "UF_CAM_SDA", - - "UF_CAM_SCL", /* 70 */ - "WF_CAM_SDA", - "WF_CAM_SCL", - "AP_BRD_ID0", - "AP_BRD_ID1", - "AP_BRD_ID2", - "", - "FPMCU_BOOT0", - "FP_RST_L", - "PE_CLKREQ_ODL", - - "EN_EDP_PP3300", /* 80 */ - "TS_INT_L", - "FORCE_USB_BOOT", - "WCD_RST_L", - "WLAN_EN", - "BT_EN", - "WLAN_SW_CTRL", - "PCIE0_RESET_L", - "PCIE0_CLK_REQ_L", - "PCIE0_WAKE_L", - - "AS_EN", /* 90 */ - "SD_CD_ODL", - "", - /* - * AP_FLASH_WP_L is crossystem ABI. Schematics - * call it BIOS_FLASH_WP_L. - */ - "AP_FLASH_WP_L", - "BT_WLAN_SB_CLK", - "BT_WLAN_SB_DATA", - "HP_MCLK", - "HP_BCLK", - "HP_DOUT", - "HP_DIN", - - "HP_LRCLK", /* 100 */ - "HP_IRQ", - "TP_INT_ODL", - "", - "IO_SKU_ID2", - "TS_RESET_L", - "AMP_BCLK", - "AMP_DIN", - "AMP_LRCLK", - "UIM2_DATA", - - "UIM2_CLK", /* 110 */ - "UIM2_RST", - "UIM2_PRESENT", - "UIM1_DATA", - "UIM1_CLK", - "UIM1_RST", - "", - "RFFE0_CLK", - "RFFE0_DATA/BOOT_CONFIG_0", - "RFFE1_CLK", - - "RFFE1_DATA/BOOT_CONFIG_1", /* 120 */ - "RFFE2_CLK", - "RFFE2_DATA/BOOT_CONFIG_2", - "RFFE3_CLK", - "RFFE3_DATA/BOOT_CONFIG_3", - "RFFE4_CLK", - "RFFE4_DATA", - "WCI2_LTE_COEX_RXD", - "WCI2_LTE_COEX_TXD", - "IO_SKU_ID0", - - "IO_SKU_ID1", /* 130 */ - "", - "", - "QLINK0_REQ", - "QLINK0_EN", - "QLINK0_WMSS_RESET_L", - "QLINK1_REQ", - "QLINK1_EN", - "QLINK1_WMSS_RESET_L", - "FORCED_USB_BOOT_POL", - - "", /* 140 */ - "P_SENSOR_INT_L", - "AP_EC_INT_L", - "", - "WCD_SWR_TX_CLK", - "WCD_SWR_TX_DATA_0", - "WCD_SWR_TX_DATA_1", - "WCD_SWR_RX_CLK", - "WCD_SWR_RX_DATA_0", - "WCD_SWR_RX_DATA_1", - - "", /* 150 */ - "", - "", - "", - "", - "", - "", - "", - "WCD_SWR_TX_DATA_2", - "", - - "", /* 160 */ - "", - "", - "", - "", - "", - "", - "", - "", - "", - - "", /* 170 */ - "SENS_UART_TXD", - "SENS_UART_RXD", - "", - "", - ""; - - /* - * pinctrl settings for pins that have no real owners. - */ - pinctrl-names = "default"; - pinctrl-0 = <&bios_flash_wp_l>; - - amp_en: amp-en { - pins = "gpio57"; - function = "gpio"; - bias-pull-down; - }; - - ap_ec_int_l: ap-ec-int-l { - pins = "gpio142"; - input-enable; - bias-pull-up; - }; - - bios_flash_wp_l: bios-flash-wp-l { - pins = "gpio93"; - function = "gpio"; - input-enable; - bias-disable; - }; - - bt_en: bt-en { - pins = "gpio85"; - function = "gpio"; - drive-strength = <2>; - output-low; - bias-pull-down; - }; - - en_fp_rails: en-fp-rails { - pins = "gpio42"; - drive-strength = <2>; - output-high; - bias-disable; - }; - - en_pp3300_codec: en-pp3300-codec { - pins = "gpio67"; - drive-strength = <2>; - bias-disable; - }; - - en_pp3300_dx_edp: en-pp3300-dx-edp { - pins = "gpio80"; - function = "gpio"; - drive-strength = <2>; - /* Has external pulldown */ - bias-disable; - }; - - en_pp3300_hub: en-pp3300-hub { - pins = "gpio24"; - function = "gpio"; - drive-strength = <2>; - /* Has external pulldown */ - bias-disable; - }; - - fp_to_ap_irq_l: fp-to-ap-irq-l { - pins = "gpio61"; - function = "gpio"; - input-enable; - /* Has external pullup */ - bias-disable; - }; - - h1_ap_int_odl: h1-ap-int-odl { - pins = "gpio54"; - function = "gpio"; - input-enable; - bias-pull-up; - }; - - hp_irq: hp-irq { - pins = "gpio101"; - function = "gpio"; - bias-pull-up; - }; - - p_sensor_int_l: p-sensor-int-l { - pins = "gpio141"; - function = "gpio"; - input-enable; - bias-pull-up; - }; - - pen_irq_l: pen-irq-l { - pins = "gpio43"; - function = "gpio"; - /* Has external pullup */ - bias-disable; - }; - - pen_pdct_l: pen-pdct-l { - pins = "gpio39"; - function = "gpio"; - /* Has external pullup */ - bias-disable; - }; - - qup_spi8_cs_gpio_init_high: qup-spi8-cs-gpio-init-high { - pins = "gpio35"; - output-high; - }; - - qup_spi11_cs_gpio_init_high: qup-spi11-cs-gpio-init-high { - pins = "gpio47"; - output-high; - }; - - qup_spi12_cs_gpio_init_high: qup-spi12-cs-gpio-init-high { - pins = "gpio51"; - output-high; - }; - - qup_uart7_sleep_cts: qup-uart7-sleep-cts { - pins = "gpio28"; - function = "gpio"; - /* - * Configure a pull-down on CTS to match the pull of - * the Bluetooth module. - */ - bias-pull-down; - }; - - qup_uart7_sleep_rts: qup-uart7-sleep-rts { - pins = "gpio29"; - function = "gpio"; - /* - * Configure pull-down on RTS. As RTS is active low - * signal, pull it low to indicate the BT SoC that it - * can wakeup the system anytime from suspend state by - * pulling RX low (by sending wakeup bytes). - */ - bias-pull-down; - }; - - qup_uart7_sleep_rx: qup-uart7-sleep-rx { - pins = "gpio31"; - function = "gpio"; - /* - * Configure a pull-up on RX. This is needed to avoid - * garbage data when the TX pin of the Bluetooth module - * is floating which may cause spurious wakeups. - */ - bias-pull-up; - }; - - qup_uart7_sleep_tx: qup-uart7-sleep-tx { - pins = "gpio30"; - function = "gpio"; - /* - * Configure pull-up on TX when it isn't actively driven - * to prevent BT SoC from receiving garbage during sleep. - */ - bias-pull-up; - }; - - sd_cd: sd-cd { - pins = "gpio91"; - function = "gpio"; - bias-pull-up; - }; - - tp_int_odl: tp-int-odl { - pins = "gpio102"; - function = "gpio"; - /* Has external pullup */ - bias-disable; - }; - - ts_int_l: ts-int-l { - pins = "gpio81"; - function = "gpio"; - /* Has external pullup */ - bias-pull-up; - }; - - ts_reset_l: ts-reset-l { - pins = "gpio105"; - function = "gpio"; - /* Has external pullup */ - bias-disable; - drive-strength = <2>; - }; - - uf_cam_en: uf-cam-en { - pins = "gpio6"; - function = "gpio"; - drive-strength = <2>; - /* Has external pulldown */ - bias-disable; - }; - - wf_cam_en: wf-cam-en { - pins = "gpio7"; - function = "gpio"; - drive-strength = <2>; - /* Has external pulldown */ - bias-disable; - }; -}; diff --git a/dts/src/arm64/qcom/sc7280-herobrine-herobrine-r1.dts b/dts/src/arm64/qcom/sc7280-herobrine-herobrine-r1.dts index f95273052d..b69ca09d9b 100644 --- a/dts/src/arm64/qcom/sc7280-herobrine-herobrine-r1.dts +++ b/dts/src/arm64/qcom/sc7280-herobrine-herobrine-r1.dts @@ -14,6 +14,36 @@ compatible = "google,herobrine", "qcom,sc7280"; }; +/* + * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES + * + * Sort order matches the order in the parent files (parents before children). + */ + +&pp3300_codec { + status = "okay"; +}; + +&pp3300_fp_mcu { + status = "okay"; +}; + +&pp2850_vcm_wf_cam { + status = "okay"; +}; + +&pp2850_wf_cam { + status = "okay"; +}; + +&pp1800_wf_cam { + status = "okay"; +}; + +&pp1200_wf_cam { + status = "okay"; +}; + /* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ &ap_spi_fp { @@ -70,6 +100,14 @@ ts_i2c: &i2c13 { }; }; +&mdss_edp { + status = "okay"; +}; + +&mdss_edp_phy { + status = "okay"; +}; + /* For nvme */ &pcie1 { status = "okay"; diff --git a/dts/src/arm64/qcom/sc7280-herobrine-villager-r0.dts b/dts/src/arm64/qcom/sc7280-herobrine-villager-r0.dts new file mode 100644 index 0000000000..d3d6ffad4e --- /dev/null +++ b/dts/src/arm64/qcom/sc7280-herobrine-villager-r0.dts @@ -0,0 +1,304 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Villager board device tree source + * + * Copyright 2022 Google LLC. + */ + +/dts-v1/; + +#include "sc7280-herobrine.dtsi" + +/ { + model = "Google Villager (rev0+)"; + compatible = "google,villager", "qcom,sc7280"; +}; + +/* + * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES + * + * Sort order matches the order in the parent files (parents before children). + */ + +&pp3300_codec { + status = "okay"; +}; + +/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ + +ap_tp_i2c: &i2c0 { + status = "okay"; + clock-frequency = <400000>; + + trackpad: trackpad@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + pinctrl-names = "default"; + pinctrl-0 = <&tp_int_odl>; + + interrupt-parent = <&tlmm>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + + hid-descr-addr = <0x20>; + vcc-supply = <&pp3300_z1>; + + wakeup-source; + }; +}; + +&ap_sar_sensor_i2c { + status = "okay"; +}; + +&ap_sar_sensor0 { + status = "okay"; +}; + +&ap_sar_sensor1 { + status = "okay"; +}; + +&mdss_edp { + status = "okay"; +}; + +&mdss_edp_phy { + status = "okay"; +}; + +/* For nvme */ +&pcie1 { + status = "okay"; +}; + +/* For nvme */ +&pcie1_phy { + status = "okay"; +}; + +/* For eMMC */ +&sdhc_1 { + status = "okay"; +}; + +/* PINCTRL - BOARD-SPECIFIC */ + +/* + * Methodology for gpio-line-names: + * - If a pin goes to herobrine board and is named it gets that name. + * - If a pin goes to herobrine board and is not named, it gets no name. + * - If a pin is totally internal to Qcard then it gets Qcard name. + * - If a pin is not hooked up on Qcard, it gets no name. + */ + +&pm8350c_gpios { + gpio-line-names = "FLASH_STROBE_1", /* 1 */ + "AP_SUSPEND", + "PM8008_1_RST_N", + "", + "", + "", + "PMIC_EDP_BL_EN", + "PMIC_EDP_BL_PWM", + ""; +}; + +&tlmm { + gpio-line-names = "AP_TP_I2C_SDA", /* 0 */ + "AP_TP_I2C_SCL", + "SSD_RST_L", + "PE_WAKE_ODL", + "AP_SAR_SDA", + "AP_SAR_SCL", + "PRB_SC_GPIO_6", + "TP_INT_ODL", + "HP_I2C_SDA", + "HP_I2C_SCL", + + "GNSS_L1_EN", /* 10 */ + "GNSS_L5_EN", + "SPI_AP_MOSI", + "SPI_AP_MISO", + "SPI_AP_CLK", + "SPI_AP_CS0_L", + /* + * AP_FLASH_WP is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_OD. + */ + "AP_FLASH_WP", + "", + "AP_EC_INT_L", + "", + + "UF_CAM_RST_L", /* 20 */ + "WF_CAM_RST_L", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "", + "PM8008_IRQ_1", + "HOST2WLAN_SOL", + "WLAN2HOST_SOL", + "MOS_BT_UART_CTS", + "MOS_BT_UART_RFR", + + "MOS_BT_UART_TX", /* 30 */ + "MOS_BT_UART_RX", + "PRB_SC_GPIO_32", + "HUB_RST_L", + "", + "", + "AP_SPI_FP_MISO", + "AP_SPI_FP_MOSI", + "AP_SPI_FP_CLK", + "AP_SPI_FP_CS_L", + + "AP_EC_SPI_MISO", /* 40 */ + "AP_EC_SPI_MOSI", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "LCM_RST_L", + "EARLY_EUD_N", + "", + "DP_HOT_PLUG_DET", + "IO_BRD_MLB_ID0", + "IO_BRD_MLB_ID1", + + "IO_BRD_MLB_ID2", /* 50 */ + "SSD_EN", + "TS_I2C_SDA_CONN", + "TS_I2C_CLK_CONN", + "TS_RST_CONN", + "TS_INT_CONN", + "AP_I2C_TPM_SDA", + "AP_I2C_TPM_SCL", + "PRB_SC_GPIO_58", + "PRB_SC_GPIO_59", + + "EDP_HOT_PLUG_DET_N", /* 60 */ + "FP_TO_AP_IRQ_L", + "", + "AMP_EN", + "CAM0_MCLK_GPIO_64", + "CAM1_MCLK_GPIO_65", + "WF_CAM_MCLK", + "PRB_SC_GPIO_67", + "FPMCU_BOOT0", + "UF_CAM_SDA", + + "UF_CAM_SCL", /* 70 */ + "", + "", + "WF_CAM_SDA", + "WF_CAM_SCL", + "", + "", + "EN_FP_RAILS", + "FP_RST_L", + "PCIE1_CLKREQ_ODL", + + "EN_PP3300_DX_EDP", /* 80 */ + "SC_GPIO_81", + "FORCED_USB_BOOT", + "WCD_RESET_N", + "MOS_WLAN_EN", + "MOS_BT_EN", + "MOS_SW_CTRL", + "MOS_PCIE0_RST", + "MOS_PCIE0_CLKREQ_N", + "MOS_PCIE0_WAKE_N", + + "MOS_LAA_AS_EN", /* 90 */ + "SD_CD_ODL", + "", + "", + "MOS_BT_WLAN_SLIMBUS_CLK", + "MOS_BT_WLAN_SLIMBUS_DAT0", + "HP_MCLK", + "HP_BCLK", + "HP_DOUT", + "HP_DIN", + + "HP_LRCLK", /* 100 */ + "HP_IRQ", + "", + "", + "GSC_AP_INT_ODL", + "EN_PP3300_CODEC", + "AMP_BCLK", + "AMP_DIN", + "AMP_LRCLK", + "UIM1_DATA_GPIO_109", + + "UIM1_CLK_GPIO_110", /* 110 */ + "UIM1_RESET_GPIO_111", + "PRB_SC_GPIO_112", + "UIM0_DATA", + "UIM0_CLK", + "UIM0_RST", + "UIM0_PRESENT_ODL", + "SDM_RFFE0_CLK", + "SDM_RFFE0_DATA", + "WF_CAM_EN", + + "FASTBOOT_SEL_0", /* 120 */ + "SC_GPIO_121", + "FASTBOOT_SEL_1", + "SC_GPIO_123", + "FASTBOOT_SEL_2", + "SM_RFFE4_CLK_GRFC_8", + "SM_RFFE4_DATA_GRFC_9", + "WLAN_COEX_UART1_RX", + "WLAN_COEX_UART1_TX", + "PRB_SC_GPIO_129", + + "LCM_ID0", /* 130 */ + "LCM_ID1", + "", + "SDR_QLINK_REQ", + "SDR_QLINK_EN", + "QLINK0_WMSS_RESET_N", + "SMR526_QLINK1_REQ", + "SMR526_QLINK1_EN", + "SMR526_QLINK1_WMSS_RESET_N", + "PRB_SC_GPIO_139", + + "SAR1_IRQ_ODL", /* 140 */ + "SAR0_IRQ_ODL", + "PRB_SC_GPIO_142", + "", + "WCD_SWR_TX_CLK", + "WCD_SWR_TX_DATA0", + "WCD_SWR_TX_DATA1", + "WCD_SWR_RX_CLK", + "WCD_SWR_RX_DATA0", + "WCD_SWR_RX_DATA1", + + "DMIC01_CLK", /* 150 */ + "DMIC01_DATA", + "DMIC23_CLK", + "DMIC23_DATA", + "", + "", + "EC_IN_RW_ODL", + "HUB_EN", + "WCD_SWR_TX_DATA2", + "", + + "", /* 160 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + + "", /* 170 */ + "MOS_BLE_UART_TX", + "MOS_BLE_UART_RX", + "", + "", + ""; +}; diff --git a/dts/src/arm64/qcom/sc7280-herobrine.dtsi b/dts/src/arm64/qcom/sc7280-herobrine.dtsi index dc17f20796..9cb1bc8ed6 100644 --- a/dts/src/arm64/qcom/sc7280-herobrine.dtsi +++ b/dts/src/arm64/qcom/sc7280-herobrine.dtsi @@ -92,6 +92,7 @@ pinctrl-0 = <&en_pp3300_codec>; vin-supply = <&pp3300_z1>; + status = "disabled"; }; pp3300_left_in_mlb: pp3300-left-in-mlb-regulator { @@ -132,6 +133,7 @@ pinctrl-0 = <&en_fp_rails>; vin-supply = <&pp3300_z1>; + status = "disabled"; }; pp3300_hub: pp3300-hub-regulator { @@ -178,6 +180,13 @@ pinctrl-names = "default"; pinctrl-0 = <&ssd_en>; + /* + * The bootloaer may have left PCIe configured. Powering this + * off while the PCIe clocks are still running isn't great, + * so it's better to default to this regulator being on. + */ + regulator-boot-on; + vin-supply = <&pp3300_z1>; }; @@ -194,6 +203,7 @@ pinctrl-0 = <&wf_cam_en>; vin-supply = <&pp3300_z1>; + status = "disabled"; }; pp2850_wf_cam: pp2850-wf-cam-regulator { @@ -214,6 +224,7 @@ */ vin-supply = <&pp3300_z1>; + status = "disabled"; }; pp1800_fp: pp1800-fp-regulator { @@ -258,6 +269,7 @@ */ vin-supply = <&vreg_l19b_s0>; + status = "disabled"; }; pp1200_wf_cam: pp1200-wf-cam-regulator { @@ -278,6 +290,7 @@ */ vin-supply = <&pp3300_z1>; + status = "disabled"; }; /* BOARD-SPECIFIC TOP LEVEL NODES */ @@ -295,7 +308,10 @@ }; /* - * BOARD-LOCAL NAMES FOR REGULATORS THAT CONNECT TO QCARD + * ADJUSTMENTS TO QCARD REGULATORS + * + * Mostly this is just board-local names for regulators that come from + * Qcard, but this also has some minor regulator overrides. * * Names are only listed here if regulators go somewhere other than a * testpoint. @@ -339,8 +355,60 @@ vreg_edp_bl: &ppvar_sys {}; ts_avdd: &pp3300_left_in_mlb {}; vreg_edp_3p3: &pp3300_left_in_mlb {}; +/* Regulator overrides from Qcard */ + +/* + * Herobrine boards only use l2c to power an external audio codec (like + * alc5682) and we want that to be at 1.8V, not at some slightly lower voltage. + */ +&vreg_l2c_1p8 { + regulator-min-microvolt = <1800000>; +}; + /* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ +&edp_panel { + /* Our board provides power to the qcard for the eDP panel. */ + power-supply = <&vreg_edp_3p3>; +}; + +ap_sar_sensor_i2c: &i2c1 { + clock-frequency = <400000>; + status = "disabled"; + + ap_sar_sensor0: proximity@28 { + compatible = "semtech,sx9324"; + reg = <0x28>; + #io-channel-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sar0_irq_odl>; + + interrupt-parent = <&tlmm>; + interrupts = <141 IRQ_TYPE_LEVEL_LOW>; + + vdd-supply = <&pp1800_prox>; + + label = "proximity-wifi-lte0"; + status = "disabled"; + }; + + ap_sar_sensor1: proximity@2c { + compatible = "semtech,sx9324"; + reg = <0x2c>; + #io-channel-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sar1_irq_odl>; + + interrupt-parent = <&tlmm>; + interrupts = <140 IRQ_TYPE_LEVEL_LOW>; + + vdd-supply = <&pp1800_prox>; + + label = "proximity-wifi-lte1"; + status = "disabled"; + }; +}; + ap_i2c_tpm: &i2c14 { status = "okay"; clock-frequency = <400000>; @@ -357,6 +425,14 @@ ap_i2c_tpm: &i2c14 { }; }; +&mdss { + status = "okay"; +}; + +&mdss_mdp { + status = "okay"; +}; + /* NVMe drive, enabled on a per-board basis */ &pcie1 { pinctrl-names = "default"; @@ -366,6 +442,17 @@ ap_i2c_tpm: &i2c14 { vddpe-3v3-supply = <&pp3300_ssd>; }; +&pm8350c_pwm { + status = "okay"; +}; + +&pm8350c_pwm_backlight { + status = "okay"; + + /* Our board provides power to the qcard for the backlight */ + power-supply = <&vreg_edp_bl>; +}; + &pmk8350_rtc { status = "disabled"; }; @@ -677,7 +764,6 @@ ap_ec_spi: &spi10 { function = "gpio"; bias-disable; drive-strength = <2>; - output-high; }; fp_to_ap_irq_l: fp-to-ap-irq-l { @@ -691,7 +777,6 @@ ap_ec_spi: &spi10 { pins = "gpio68"; function = "gpio"; bias-disable; - output-low; }; gsc_ap_int_odl: gsc-ap-int-odl { @@ -741,7 +826,7 @@ ap_ec_spi: &spi10 { bias-pull-up; }; - sar1_irq_odl: sar0-irq-odl { + sar1_irq_odl: sar1-irq-odl { pins = "gpio140"; function = "gpio"; bias-pull-up; diff --git a/dts/src/arm64/qcom/sc7280-idp.dts b/dts/src/arm64/qcom/sc7280-idp.dts index a7be133a78..6d3ff80582 100644 --- a/dts/src/arm64/qcom/sc7280-idp.dts +++ b/dts/src/arm64/qcom/sc7280-idp.dts @@ -90,7 +90,7 @@ }; &usb_2_dwc3 { - dr_mode = "host"; + dr_mode = "otg"; }; &usb_2_hsphy { diff --git a/dts/src/arm64/qcom/sc7280-idp.dtsi b/dts/src/arm64/qcom/sc7280-idp.dtsi index ecbf2b89d8..5eb668991e 100644 --- a/dts/src/arm64/qcom/sc7280-idp.dtsi +++ b/dts/src/arm64/qcom/sc7280-idp.dtsi @@ -233,6 +233,14 @@ }; }; +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + &ipa { status = "okay"; modem-init; @@ -400,10 +408,13 @@ &qup_uart7_cts { /* - * Configure a pull-down on CTS to match the pull of - * the Bluetooth module. + * Configure a bias-bus-hold on CTS to lower power + * usage when Bluetooth is turned off. Bus hold will + * maintain a low power state regardless of whether + * the Bluetooth module drives the pin in either + * direction or leaves the pin fully unpowered. */ - bias-pull-down; + bias-bus-hold; }; &qup_uart7_rts { @@ -495,10 +506,13 @@ pins = "gpio28"; function = "gpio"; /* - * Configure a pull-down on CTS to match the pull of - * the Bluetooth module. + * Configure a bias-bus-hold on CTS to lower power + * usage when Bluetooth is turned off. Bus hold will + * maintain a low power state regardless of whether + * the Bluetooth module drives the pin in either + * direction or leaves the pin fully unpowered. */ - bias-pull-down; + bias-bus-hold; }; qup_uart7_sleep_rts: qup-uart7-sleep-rts { @@ -547,3 +561,13 @@ }; }; +&remoteproc_wpss { + status = "okay"; +}; + +&wifi { + status = "okay"; + wifi-firmware { + iommus = <&apps_smmu 0x1c02 0x1>; + }; +}; diff --git a/dts/src/arm64/qcom/sc7280-idp2.dts b/dts/src/arm64/qcom/sc7280-idp2.dts index 73b9911dd8..d4f7cab170 100644 --- a/dts/src/arm64/qcom/sc7280-idp2.dts +++ b/dts/src/arm64/qcom/sc7280-idp2.dts @@ -34,3 +34,7 @@ &nvme_3v3_regulator { gpio = <&tlmm 51 GPIO_ACTIVE_HIGH>; }; + +&pm8350c_pwm { + status = "okay"; +}; diff --git a/dts/src/arm64/qcom/sc7280-qcard.dtsi b/dts/src/arm64/qcom/sc7280-qcard.dtsi index b833ba1e8f..d59002d449 100644 --- a/dts/src/arm64/qcom/sc7280-qcard.dtsi +++ b/dts/src/arm64/qcom/sc7280-qcard.dtsi @@ -29,6 +29,16 @@ serial0 = &uart5; serial1 = &uart7; }; + + pm8350c_pwm_backlight: backlight { + compatible = "pwm-backlight"; + status = "disabled"; + + enable-gpios = <&pm8350c_gpios 7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_edp_bl_en>; + pwms = <&pm8350c_pwm 3 65535>; + }; }; &apps_rsc { @@ -293,11 +303,50 @@ modem-init; }; +/* NOTE: Not all Qcards have eDP connector stuffed */ +&mdss_edp { + vdda-0p9-supply = <&vdd_a_edp_0_0p9>; + vdda-1p2-supply = <&vdd_a_edp_0_1p2>; + + aux-bus { + edp_panel: panel { + compatible = "edp-panel"; + + backlight = <&pm8350c_pwm_backlight>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + edp_panel_in: endpoint { + remote-endpoint = <&mdss_edp_out>; + }; + }; + }; + }; + }; +}; + +&mdss_edp_out { + remote-endpoint = <&edp_panel_in>; +}; + +&mdss_edp_phy { + vdda-pll-supply = <&vdd_a_edp_0_0p9>; + vdda-phy-supply = <&vdd_a_edp_0_1p2>; +}; + &pcie1_phy { vdda-phy-supply = <&vreg_l10c_0p88>; vdda-pll-supply = <&vreg_l6b_1p2>; }; +&pm8350c_pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pmic_edp_bl_pwm>; +}; + &pmk8350_vadc { pmk8350-die-temp@3 { reg = <PMK8350_ADC7_DIE_TEMP>; @@ -383,6 +432,11 @@ mos_bt_uart: &uart7 { * baseboard or board device tree, not here. */ +/* No external pull for eDP HPD, so set the internal one. */ +&edp_hot_plug_det { + bias-pull-down; +}; + /* * For ts_i2c * @@ -398,8 +452,14 @@ mos_bt_uart: &uart7 { /* For mos_bt_uart */ &qup_uart7_cts { - /* Configure a pull-down on CTS to match the pull of the Bluetooth module. */ - bias-pull-down; + /* + * Configure a bias-bus-hold on CTS to lower power + * usage when Bluetooth is turned off. Bus hold will + * maintain a low power state regardless of whether + * the Bluetooth module drives the pin in either + * direction or leaves the pin fully unpowered. + */ + bias-bus-hold; }; /* For mos_bt_uart */ @@ -490,10 +550,13 @@ mos_bt_uart: &uart7 { pins = "gpio28"; function = "gpio"; /* - * Configure a pull-down on CTS to match the pull of - * the Bluetooth module. + * Configure a bias-bus-hold on CTS to lower power + * usage when Bluetooth is turned off. Bus hold will + * maintain a low power state regardless of whether + * the Bluetooth module drives the pin in either + * direction or leaves the pin fully unpowered. */ - bias-pull-down; + bias-bus-hold; }; /* For mos_bt_uart */ diff --git a/dts/src/arm64/qcom/sc7280.dtsi b/dts/src/arm64/qcom/sc7280.dtsi index f0b64be63c..e66fc67de2 100644 --- a/dts/src/arm64/qcom/sc7280.dtsi +++ b/dts/src/arm64/qcom/sc7280.dtsi @@ -8,8 +8,11 @@ #include <dt-bindings/clock/qcom,dispcc-sc7280.h> #include <dt-bindings/clock/qcom,gcc-sc7280.h> #include <dt-bindings/clock/qcom,gpucc-sc7280.h> +#include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h> +#include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/clock/qcom,videocc-sc7280.h> +#include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interconnect/qcom,osm-l3.h> #include <dt-bindings/interconnect/qcom,sc7280.h> @@ -85,6 +88,11 @@ #size-cells = <2>; ranges; + wlan_ce_mem: memory@4cd000 { + no-map; + reg = <0x0 0x004cd000 0x0 0x1000>; + }; + hyp_mem: memory@80000000 { reg = <0x0 0x80000000 0x0 0x600000>; no-map; @@ -842,6 +850,11 @@ power-domains = <&rpmhpd SC7280_MX>; #address-cells = <1>; #size-cells = <1>; + + gpu_speed_bin: gpu_speed_bin@1e9 { + reg = <0x1e9 0x2>; + bits = <5 8>; + }; }; sdhc_1: sdhci@7c4000 { @@ -881,6 +894,8 @@ mmc-hs400-1_8v; mmc-hs400-enhanced-strobe; + resets = <&gcc GCC_SDCC1_BCR>; + sdhc1_opp_table: opp-table { compatible = "operating-points-v2"; @@ -901,6 +916,28 @@ }; + gpi_dma0: dma-controller@900000 { + #dma-cells = <3>; + compatible = "qcom,sc7280-gpi-dma"; + reg = <0 0x00900000 0 0x60000>; + interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <12>; + dma-channel-mask = <0x7f>; + iommus = <&apps_smmu 0x0136 0x0>; + status = "disabled"; + }; + qupv3_id_0: geniqup@9c0000 { compatible = "qcom,geni-se-qup"; reg = <0 0x009c0000 0 0x2000>; @@ -928,6 +965,9 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, + <&gpi_dma0 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -946,6 +986,9 @@ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, + <&gpi_dma0 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -980,6 +1023,9 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, + <&gpi_dma0 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -998,6 +1044,9 @@ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, + <&gpi_dma0 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1032,6 +1081,9 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, + <&gpi_dma0 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1050,6 +1102,9 @@ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, + <&gpi_dma0 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1084,6 +1139,9 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, + <&gpi_dma0 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1102,6 +1160,9 @@ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, + <&gpi_dma0 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1136,6 +1197,9 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, + <&gpi_dma0 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1154,6 +1218,9 @@ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, + <&gpi_dma0 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1188,6 +1255,9 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, + <&gpi_dma0 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1206,6 +1276,9 @@ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, + <&gpi_dma0 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1240,6 +1313,9 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>, + <&gpi_dma0 1 6 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1258,6 +1334,9 @@ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>, + <&gpi_dma0 1 6 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1292,6 +1371,9 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>, + <&gpi_dma0 1 7 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1310,6 +1392,9 @@ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>, + <&gpi_dma0 1 7 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1330,6 +1415,28 @@ }; }; + gpi_dma1: dma-controller@a00000 { + #dma-cells = <3>; + compatible = "qcom,sc7280-gpi-dma"; + reg = <0 0x00a00000 0 0x60000>; + interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <12>; + dma-channel-mask = <0x1e>; + iommus = <&apps_smmu 0x56 0x0>; + status = "disabled"; + }; + qupv3_id_1: geniqup@ac0000 { compatible = "qcom,geni-se-qup"; reg = <0 0x00ac0000 0 0x2000>; @@ -1357,6 +1464,9 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, + <&gpi_dma1 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1375,6 +1485,9 @@ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, + <&gpi_dma1 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1409,6 +1522,9 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, + <&gpi_dma1 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1427,6 +1543,9 @@ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, + <&gpi_dma1 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1461,6 +1580,9 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, + <&gpi_dma1 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1479,6 +1601,9 @@ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, + <&gpi_dma1 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1513,6 +1638,9 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, + <&gpi_dma1 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1531,6 +1659,9 @@ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, + <&gpi_dma1 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1565,6 +1696,9 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, + <&gpi_dma1 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1583,6 +1717,9 @@ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, + <&gpi_dma1 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1617,6 +1754,9 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, + <&gpi_dma1 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1635,6 +1775,9 @@ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>, + <&gpi_dma1 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1669,6 +1812,9 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>, + <&gpi_dma1 1 6 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1687,6 +1833,9 @@ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>, + <&gpi_dma1 1 6 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1721,6 +1870,9 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>, + <&gpi_dma1 1 7 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1739,6 +1891,9 @@ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>, + <&gpi_dma1 1 7 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1808,6 +1963,47 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; + wifi: wifi@17a10040 { + compatible = "qcom,wcn6750-wifi"; + reg = <0 0x17a10040 0 0x0>; + iommus = <&apps_smmu 0x1c00 0x1>; + interrupts = <GIC_SPI 768 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 769 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 770 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 771 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 772 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 773 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 774 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 775 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 776 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 777 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 778 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 779 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 780 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 781 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 782 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 783 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 784 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 785 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 786 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 787 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 788 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 789 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 790 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 791 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 792 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 793 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 794 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 795 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 796 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 797 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 798 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 799 IRQ_TYPE_EDGE_RISING>; + qcom,rproc = <&remoteproc_wpss>; + memory-region = <&wlan_fw_mem>, <&wlan_ce_mem>; + status = "disabled"; + }; + pcie1: pci@1c08000 { compatible = "qcom,pcie-sc7280"; reg = <0 0x01c08000 0 0x3000>, @@ -1903,7 +2099,7 @@ status = "disabled"; - pcie1_lane: lanes@1c0e200 { + pcie1_lane: phy@1c0e200 { reg = <0 0x01c0e200 0 0x170>, <0 0x01c0e400 0 0x200>, <0 0x01c0ea00 0 0x1f0>, @@ -1980,6 +2176,47 @@ #clock-cells = <1>; }; + lpass_audiocc: clock-controller@3300000 { + compatible = "qcom,sc7280-lpassaudiocc"; + reg = <0 0x03300000 0 0x30000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&lpass_aon LPASS_AON_CC_MAIN_RCG_CLK_SRC>; + clock-names = "bi_tcxo", "lpass_aon_cc_main_rcg_clk_src"; + power-domains = <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>; + #clock-cells = <1>; + #power-domain-cells = <1>; + }; + + lpass_aon: clock-controller@3380000 { + compatible = "qcom,sc7280-lpassaoncc"; + reg = <0 0x03380000 0 0x30000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&lpasscore LPASS_CORE_CC_CORE_CLK>; + clock-names = "bi_tcxo", "bi_tcxo_ao", "iface"; + #clock-cells = <1>; + #power-domain-cells = <1>; + }; + + lpasscore: clock-controller@3900000 { + compatible = "qcom,sc7280-lpasscorecc"; + reg = <0 0x03900000 0 0x50000>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "bi_tcxo"; + power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>; + #clock-cells = <1>; + #power-domain-cells = <1>; + }; + + lpass_hm: clock-controller@3c00000 { + compatible = "qcom,sc7280-lpasshm"; + reg = <0 0x3c00000 0 0x28>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "bi_tcxo"; + #clock-cells = <1>; + #power-domain-cells = <1>; + }; + lpass_ag_noc: interconnect@3c40000 { reg = <0 0x03c40000 0 0xf080>; compatible = "qcom,sc7280-lpass-ag-noc"; @@ -2003,6 +2240,9 @@ interconnect-names = "gfx-mem"; #cooling-cells = <2>; + nvmem-cells = <&gpu_speed_bin>; + nvmem-cell-names = "speed_bin"; + gpu_opp_table: opp-table { compatible = "operating-points-v2"; @@ -2010,18 +2250,56 @@ opp-hz = /bits/ 64 <315000000>; opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; opp-peak-kBps = <1804000>; + opp-supported-hw = <0x03>; }; opp-450000000 { opp-hz = /bits/ 64 <450000000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS>; opp-peak-kBps = <4068000>; + opp-supported-hw = <0x03>; }; opp-550000000 { opp-hz = /bits/ 64 <550000000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; opp-peak-kBps = <6832000>; + opp-supported-hw = <0x03>; + }; + + opp-608000000 { + opp-hz = /bits/ 64 <608000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>; + opp-peak-kBps = <8368000>; + opp-supported-hw = <0x02>; + }; + + opp-700000000 { + opp-hz = /bits/ 64 <700000000>; + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + opp-peak-kBps = <8532000>; + opp-supported-hw = <0x02>; + }; + + opp-812000000 { + opp-hz = /bits/ 64 <812000000>; + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + opp-peak-kBps = <8532000>; + opp-supported-hw = <0x02>; + }; + + opp-840000000 { + opp-hz = /bits/ 64 <840000000>; + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + opp-peak-kBps = <8532000>; + opp-supported-hw = <0x02>; + }; + + opp-900000000 { + opp-hz = /bits/ 64 <900000000>; + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + opp-peak-kBps = <8532000>; + opp-supported-hw = <0x02>; }; }; }; @@ -2686,6 +2964,8 @@ qcom,dll-config = <0x0007642c>; + resets = <&gcc GCC_SDCC2_BCR>; + sdhc2_opp_table: opp-table { compatible = "operating-points-v2"; @@ -2789,10 +3069,13 @@ clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, <&gcc GCC_USB30_SEC_MASTER_CLK>, <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, - <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_SEC_SLEEP_CLK>; - clock-names = "cfg_noc", "core", "iface","mock_utmi", - "sleep"; + <&gcc GCC_USB30_SEC_SLEEP_CLK>, + <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, <&gcc GCC_USB30_SEC_MASTER_CLK>; @@ -2822,6 +3105,12 @@ phys = <&usb_2_hsphy>; phy-names = "usb2-phy"; maximum-speed = "high-speed"; + usb-role-switch; + port { + usb2_role_switch: endpoint { + remote-endpoint = <&eud_ep>; + }; + }; }; }; @@ -2842,6 +3131,57 @@ status = "disabled"; }; + remoteproc_wpss: remoteproc@8a00000 { + compatible = "qcom,sc7280-wpss-pil"; + reg = <0 0x08a00000 0 0x10000>; + + interrupts-extended = <&intc GIC_SPI 587 IRQ_TYPE_EDGE_RISING>, + <&wpss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&wpss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&wpss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&wpss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&wpss_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + clocks = <&gcc GCC_WPSS_AHB_BDG_MST_CLK>, + <&gcc GCC_WPSS_AHB_CLK>, + <&gcc GCC_WPSS_RSCP_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ahb_bdg", "ahb", + "rscp", "xo"; + + power-domains = <&rpmhpd SC7280_CX>, + <&rpmhpd SC7280_MX>; + power-domain-names = "cx", "mx"; + + memory-region = <&wpss_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&wpss_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + resets = <&aoss_reset AOSS_CC_WCSS_RESTART>, + <&pdc_reset PDC_WPSS_SYNC_RESET>; + reset-names = "restart", "pdc_sync"; + + qcom,halt-regs = <&tcsr_mutex 0x37000>; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_WPSS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_WPSS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "wpss"; + qcom,remote-pid = <13>; + }; + }; + dc_noc: interconnect@90e0000 { reg = <0 0x090e0000 0 0x5080>; compatible = "qcom,sc7280-dc-noc"; @@ -2863,6 +3203,36 @@ interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; }; + eud: eud@88e0000 { + compatible = "qcom,sc7280-eud","qcom,eud"; + reg = <0 0x88e0000 0 0x2000>, + <0 0x88e2000 0 0x1000>; + interrupts-extended = <&pdc 11 IRQ_TYPE_LEVEL_HIGH>; + ports { + port@0 { + eud_ep: endpoint { + remote-endpoint = <&usb2_role_switch>; + }; + }; + port@1 { + eud_con: endpoint { + remote-endpoint = <&con_eud>; + }; + }; + }; + }; + + eud_typec: connector { + compatible = "usb-c-connector"; + ports { + port@0 { + con_eud: endpoint { + remote-endpoint = <&eud_con>; + }; + }; + }; + }; + nsp_noc: interconnect@a0c0000 { reg = <0 0x0a0c0000 0 0x10000>; compatible = "qcom,sc7280-nsp-noc"; @@ -2882,21 +3252,26 @@ clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>, <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, - <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_PRIM_SLEEP_CLK>; - clock-names = "cfg_noc", "core", "iface", "mock_utmi", - "sleep"; + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>; assigned-clock-rates = <19200000>, <200000000>; interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 14 IRQ_TYPE_EDGE_BOTH>, + <&pdc 17 IRQ_TYPE_EDGE_BOTH>, <&pdc 15 IRQ_TYPE_EDGE_BOTH>, - <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hs_phy_irq", "dp_hs_phy_irq", - "dm_hs_phy_irq", "ss_phy_irq"; + <&pdc 14 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", + "ss_phy_irq", + "dm_hs_phy_irq", + "dp_hs_phy_irq"; power-domains = <&gcc GCC_USB30_PRIM_GDSC>; @@ -2916,6 +3291,7 @@ phys = <&usb_1_hsphy>, <&usb_1_ssphy>; phy-names = "usb2-phy", "usb3-phy"; maximum-speed = "super-speed"; + wakeup-source; }; }; @@ -3296,7 +3672,7 @@ port@1 { reg = <1>; - edp_out: endpoint { }; + mdss_edp_out: endpoint { }; }; }; diff --git a/dts/src/arm64/qcom/sdm630.dtsi b/dts/src/arm64/qcom/sdm630.dtsi index 240293592e..b72e8e6c52 100644 --- a/dts/src/arm64/qcom/sdm630.dtsi +++ b/dts/src/arm64/qcom/sdm630.dtsi @@ -1215,11 +1215,15 @@ clocks = <&gcc GCC_CFG_NOC_USB3_AXI_CLK>, <&gcc GCC_USB30_MASTER_CLK>, <&gcc GCC_AGGRE2_USB3_AXI_CLK>, - <&rpmcc RPM_SMD_AGGR2_NOC_CLK>, + <&gcc GCC_USB30_SLEEP_CLK>, <&gcc GCC_USB30_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_SLEEP_CLK>; - clock-names = "cfg_noc", "core", "iface", "bus", - "mock_utmi", "sleep"; + <&rpmcc RPM_SMD_AGGR2_NOC_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "bus"; assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, <&gcc GCC_USB30_MASTER_CLK>, @@ -1453,7 +1457,7 @@ reg-names = "mdp_phys"; interrupt-parent = <&mdss>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <0>; assigned-clocks = <&mmcc MDSS_MDP_CLK>, <&mmcc MDSS_VSYNC_CLK>; @@ -1530,7 +1534,7 @@ power-domains = <&rpmpd SDM660_VDDCX>; interrupt-parent = <&mdss>; - interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <4>; assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>; diff --git a/dts/src/arm64/qcom/sdm660.dtsi b/dts/src/arm64/qcom/sdm660.dtsi index eccf6fde16..1d748c5305 100644 --- a/dts/src/arm64/qcom/sdm660.dtsi +++ b/dts/src/arm64/qcom/sdm660.dtsi @@ -163,7 +163,7 @@ power-domains = <&rpmpd SDM660_VDDCX>; interrupt-parent = <&mdss>; - interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <5>; assigned-clocks = <&mmcc BYTE1_CLK_SRC>, <&mmcc PCLK1_CLK_SRC>; diff --git a/dts/src/arm64/qcom/sdm845-db845c.dts b/dts/src/arm64/qcom/sdm845-db845c.dts index 28fe45c5d5..194ebeb325 100644 --- a/dts/src/arm64/qcom/sdm845-db845c.dts +++ b/dts/src/arm64/qcom/sdm845-db845c.dts @@ -28,6 +28,13 @@ stdout-path = "serial0:115200n8"; }; + /* Fixed crystal oscillator dedicated to MCP2517FD */ + clk40M: can-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <40000000>; + }; + dc12v: dc12v-regulator { compatible = "regulator-fixed"; regulator-name = "DC12V"; @@ -746,6 +753,23 @@ }; }; +&spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi0_default>; + cs-gpios = <&tlmm 3 GPIO_ACTIVE_LOW>; + + can@0 { + compatible = "microchip,mcp2517fd"; + reg = <0>; + clocks = <&clk40M>; + interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>; + spi-max-frequency = <10000000>; + vdd-supply = <&vdc_5v>; + xceiver-supply = <&vdc_5v>; + }; +}; + &spi2 { /* On Low speed expansion */ label = "LS-SPI0"; @@ -1051,6 +1075,7 @@ vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; qcom,snoc-host-cap-8bit-quirk; + qcom,ath10k-calibration-variant = "Thundercomm_DB845C"; }; /* PINCTRL - additions to nodes defined in sdm845.dtsi */ @@ -1219,3 +1244,11 @@ }; }; }; + +/* PINCTRL - additions to nodes defined in sdm845.dtsi */ +&qup_spi0_default { + config { + drive-strength = <6>; + bias-disable; + }; +}; diff --git a/dts/src/arm64/qcom/sdm845-xiaomi-beryllium.dts b/dts/src/arm64/qcom/sdm845-xiaomi-beryllium.dts index 367389526b..d88dc07205 100644 --- a/dts/src/arm64/qcom/sdm845-xiaomi-beryllium.dts +++ b/dts/src/arm64/qcom/sdm845-xiaomi-beryllium.dts @@ -121,7 +121,7 @@ &adsp_pas { status = "okay"; - firmware-name = "qcom/sdm845/adsp.mdt"; + firmware-name = "qcom/sdm845/beryllium/adsp.mbn"; }; &apps_rsc { @@ -185,6 +185,12 @@ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; + vreg_l23a_3p3: ldo23 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + vreg_l24a_3p075: ldo24 { regulator-min-microvolt = <3088000>; regulator-max-microvolt = <3088000>; @@ -208,7 +214,7 @@ &cdsp_pas { status = "okay"; - firmware-name = "qcom/sdm845/cdsp.mdt"; + firmware-name = "qcom/sdm845/beryllium/cdsp.mbn"; }; &dsi0 { @@ -218,13 +224,14 @@ panel@0 { compatible = "tianma,fhd-video"; reg = <0>; - vddi0-supply = <&vreg_l14a_1p8>; + vddio-supply = <&vreg_l14a_1p8>; vddpos-supply = <&lab>; vddneg-supply = <&ibb>; #address-cells = <1>; #size-cells = <0>; + backlight = <&pmi8998_wled>; reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; port { @@ -262,7 +269,7 @@ zap-shader { memory-region = <&gpu_mem>; - firmware-name = "qcom/sdm845/a630_zap.mbn"; + firmware-name = "qcom/sdm845/beryllium/a630_zap.mbn"; }; }; @@ -289,7 +296,13 @@ &mss_pil { status = "okay"; - firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mdt"; + firmware-name = "qcom/sdm845/beryllium/mba.mbn", "qcom/sdm845/beryllium/modem.mbn"; +}; + +&ipa { + status = "okay"; + memory-region = <&ipa_fw_mem>; + firmware-name = "qcom/sdm845/beryllium/ipa_fws.mbn"; }; &pm8998_gpio { @@ -302,6 +315,17 @@ }; }; +&pmi8998_wled { + status = "okay"; + qcom,current-boost-limit = <970>; + qcom,ovp-millivolt = <29600>; + qcom,current-limit-microamp = <20000>; + qcom,num-strings = <2>; + qcom,switching-freq = <600>; + qcom,external-pfet; + qcom,cabc; +}; + &pm8998_pon { resin { compatible = "qcom,pm8941-resin"; @@ -541,6 +565,7 @@ vdd-1.8-xo-supply = <&vreg_l7a_1p8>; vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; + vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; }; /* PINCTRL - additions to nodes defined in sdm845.dtsi */ diff --git a/dts/src/arm64/qcom/sdm845.dtsi b/dts/src/arm64/qcom/sdm845.dtsi index b31bf62e86..0692ae0e60 100644 --- a/dts/src/arm64/qcom/sdm845.dtsi +++ b/dts/src/arm64/qcom/sdm845.dtsi @@ -200,8 +200,8 @@ cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; - capacity-dmips-mhz = <607>; - dynamic-power-coefficient = <100>; + capacity-dmips-mhz = <611>; + dynamic-power-coefficient = <290>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, @@ -225,8 +225,8 @@ cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; - capacity-dmips-mhz = <607>; - dynamic-power-coefficient = <100>; + capacity-dmips-mhz = <611>; + dynamic-power-coefficient = <290>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, @@ -247,8 +247,8 @@ cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; - capacity-dmips-mhz = <607>; - dynamic-power-coefficient = <100>; + capacity-dmips-mhz = <611>; + dynamic-power-coefficient = <290>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, @@ -269,8 +269,8 @@ cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; - capacity-dmips-mhz = <607>; - dynamic-power-coefficient = <100>; + capacity-dmips-mhz = <611>; + dynamic-power-coefficient = <290>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, @@ -292,7 +292,7 @@ cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; - dynamic-power-coefficient = <396>; + dynamic-power-coefficient = <442>; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, @@ -314,7 +314,7 @@ cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; - dynamic-power-coefficient = <396>; + dynamic-power-coefficient = <442>; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, @@ -336,7 +336,7 @@ cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; - dynamic-power-coefficient = <396>; + dynamic-power-coefficient = <442>; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, @@ -358,7 +358,7 @@ cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; - dynamic-power-coefficient = <396>; + dynamic-power-coefficient = <442>; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, @@ -2027,7 +2027,7 @@ }; pcie0: pci@1c00000 { - compatible = "qcom,pcie-sdm845", "snps,dw-pcie"; + compatible = "qcom,pcie-sdm845"; reg = <0 0x01c00000 0 0x2000>, <0 0x60000000 0 0xf1d>, <0 0x60000f20 0 0xa8>, @@ -2132,7 +2132,7 @@ }; pcie1: pci@1c08000 { - compatible = "qcom,pcie-sdm845", "snps,dw-pcie"; + compatible = "qcom,pcie-sdm845"; reg = <0 0x01c08000 0 0x2000>, <0 0x40000000 0 0xf1d>, <0 0x40000f20 0 0xa8>, @@ -3844,10 +3844,13 @@ clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>, <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, - <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_PRIM_SLEEP_CLK>; - clock-names = "cfg_noc", "core", "iface", "mock_utmi", - "sleep"; + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>; @@ -3868,7 +3871,7 @@ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>; interconnect-names = "usb-ddr", "apps-usb"; - usb_1_dwc3: dwc3@a600000 { + usb_1_dwc3: usb@a600000 { compatible = "snps,dwc3"; reg = <0 0x0a600000 0 0xcd00>; interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; @@ -3892,10 +3895,13 @@ clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, <&gcc GCC_USB30_SEC_MASTER_CLK>, <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, - <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_SEC_SLEEP_CLK>; - clock-names = "cfg_noc", "core", "iface", "mock_utmi", - "sleep"; + <&gcc GCC_USB30_SEC_SLEEP_CLK>, + <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, <&gcc GCC_USB30_SEC_MASTER_CLK>; @@ -3916,7 +3922,7 @@ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>; interconnect-names = "usb-ddr", "apps-usb"; - usb_2_dwc3: dwc3@a800000 { + usb_2_dwc3: usb@a800000 { compatible = "snps,dwc3"; reg = <0 0x0a800000 0 0xcd00>; interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; @@ -4283,7 +4289,7 @@ power-domains = <&rpmhpd SDM845_CX>; interrupt-parent = <&mdss>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <0>; ports { #address-cells = <1>; @@ -4335,7 +4341,7 @@ reg-names = "dsi_ctrl"; interrupt-parent = <&mdss>; - interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <4>; clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, @@ -4407,7 +4413,7 @@ reg-names = "dsi_ctrl"; interrupt-parent = <&mdss>; - interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <5>; clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, diff --git a/dts/src/arm64/qcom/sm6125.dtsi b/dts/src/arm64/qcom/sm6125.dtsi index e81b2a7794..135e6e0da2 100644 --- a/dts/src/arm64/qcom/sm6125.dtsi +++ b/dts/src/arm64/qcom/sm6125.dtsi @@ -481,18 +481,24 @@ }; usb3: usb@4ef8800 { - compatible = "qcom,msm8996-dwc3", "qcom,dwc3"; + compatible = "qcom,sm6125-dwc3", "qcom,dwc3"; reg = <0x04ef8800 0x400>; #address-cells = <1>; #size-cells = <1>; ranges; - clocks = <&gcc GCC_USB30_PRIM_MASTER_CLK>, + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>, - <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, - <&gcc GCC_USB3_PRIM_CLKREF_CLK>, <&gcc GCC_USB30_PRIM_SLEEP_CLK>, - <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "xo"; assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>; diff --git a/dts/src/arm64/qcom/sm6350.dtsi b/dts/src/arm64/qcom/sm6350.dtsi index d7c9edff19..d4f8f33f3f 100644 --- a/dts/src/arm64/qcom/sm6350.dtsi +++ b/dts/src/arm64/qcom/sm6350.dtsi @@ -517,6 +517,45 @@ }; }; + qupv3_id_0: geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x8c0000 0x0 0x2000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + #address-cells = <2>; + #size-cells = <2>; + iommus = <&apps_smmu 0x43 0x0>; + ranges; + status = "disabled"; + + i2c0: i2c@880000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00880000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c0_default>; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@888000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00888000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c2_default>; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + qupv3_id_1: geniqup@9c0000 { compatible = "qcom,geni-se-qup"; reg = <0x0 0x9c0000 0x0 0x2000>; @@ -529,16 +568,146 @@ ranges; status = "disabled"; - uart2: serial@98c000 { + i2c6: i2c@980000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00980000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c6_default>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c7: i2c@984000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00984000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c7_default>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c8: i2c@988000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00988000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c8_default>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart9: serial@98c000 { compatible = "qcom,geni-debug-uart"; reg = <0 0x98c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; pinctrl-names = "default"; - pinctrl-0 = <&qup_uart2_default>; + pinctrl-0 = <&qup_uart9_default>; interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; + + i2c10: i2c@990000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00990000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c10_default>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + }; + + ufs_mem_hc: ufs@1d84000 { + compatible = "qcom,sm6350-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0 0x01d84000 0 0x3000>, + <0 0x01d90000 0 0x8000>; + reg-names = "std", "ice"; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + phys = <&ufs_mem_phy_lanes>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + power-domains = <&gcc UFS_PHY_GDSC>; + + iommus = <&apps_smmu 0x80 0x0>; + + clock-names = "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk", + "ice_core_clk"; + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmhcc RPMH_QLINK_CLK>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>, + <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; + freq-table-hz = + <50000000 200000000>, + <0 0>, + <0 0>, + <37500000 150000000>, + <75000000 300000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>; + + status = "disabled"; + }; + + ufs_mem_phy: phy@1d87000 { + compatible = "qcom,sm6350-qmp-ufs-phy"; + reg = <0 0x01d87000 0 0x18c>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clock-names = "ref", + "ref_aux"; + clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + + status = "disabled"; + + ufs_mem_phy_lanes: phy@1d87400 { + reg = <0 0x01d87400 0 0x128>, + <0 0x01d87600 0 0x1fc>, + <0 0x01d87c00 0 0x1dc>, + <0 0x01d87800 0 0x128>, + <0 0x01d87a00 0 0x1fc>; + #phy-cells = <0>; + }; }; tcsr_mutex: hwlock@1f40000 { @@ -865,10 +1034,13 @@ clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>, <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, - <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_PRIM_SLEEP_CLK>; - clock-names = "cfg_noc", "core", "iface", "mock_utmi", - "sleep"; + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, <&pdc 17 IRQ_TYPE_LEVEL_HIGH>, @@ -974,12 +1146,54 @@ #interrupt-cells = <2>; gpio-ranges = <&tlmm 0 0 157>; - qup_uart2_default: qup-uart2-default { + qup_uart9_default: qup-uart9-default { pins = "gpio25", "gpio26"; function = "qup13_f2"; drive-strength = <2>; bias-disable; }; + + qup_i2c0_default: qup-i2c0-default { + pins = "gpio0", "gpio1"; + function = "qup00"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c2_default: qup-i2c2-default { + pins = "gpio45", "gpio46"; + function = "qup02"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c6_default: qup-i2c6-default { + pins = "gpio13", "gpio14"; + function = "qup10"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c7_default: qup-i2c7-default { + pins = "gpio27", "gpio28"; + function = "qup11"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c8_default: qup-i2c8-default { + pins = "gpio19", "gpio20"; + function = "qup12"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c10_default: qup-i2c10-default { + pins = "gpio4", "gpio5"; + function = "qup14"; + drive-strength = <2>; + bias-pull-up; + }; }; apps_smmu: iommu@15000000 { @@ -1145,6 +1359,28 @@ }; }; + wifi: wifi@18800000 { + compatible = "qcom,wcn3990-wifi"; + reg = <0 0x18800000 0 0x800000>; + reg-names = "membase"; + memory-region = <&wlan_fw_mem>; + interrupts = <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x20 0x1>; + qcom,msa-fixed-perm; + status = "disabled"; + }; + apps_rsc: rsc@18200000 { compatible = "qcom,rpmh-rsc"; label = "apps_rsc"; @@ -1217,7 +1453,7 @@ }; }; - apps_bcm_voter: bcm_voter { + apps_bcm_voter: bcm-voter { compatible = "qcom,bcm-voter"; }; }; diff --git a/dts/src/arm64/qcom/sm7225-fairphone-fp4.dts b/dts/src/arm64/qcom/sm7225-fairphone-fp4.dts index adb6ca2be2..61925216f5 100644 --- a/dts/src/arm64/qcom/sm7225-fairphone-fp4.dts +++ b/dts/src/arm64/qcom/sm7225-fairphone-fp4.dts @@ -23,7 +23,7 @@ qcom,board-id = <8 32>; aliases { - serial0 = &uart2; + serial0 = &uart9; }; chosen { @@ -296,6 +296,35 @@ firmware-name = "qcom/sm7225/fairphone4/cdsp.mdt"; }; +&i2c10 { + status = "okay"; + clock-frequency = <400000>; + + haptics@5a { + compatible = "awinic,aw8695"; + reg = <0x5a>; + interrupts-extended = <&tlmm 85 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&tlmm 90 GPIO_ACTIVE_HIGH>; + + awinic,f0-preset = <2350>; + awinic,f0-coefficient = <260>; + awinic,f0-calibration-percent = <7>; + awinic,drive-level = <125>; + + awinic,f0-detection-play-time = <5>; + awinic,f0-detection-wait-time = <3>; + awinic,f0-detection-repeat = <2>; + awinic,f0-detection-trace = <15>; + + awinic,boost-debug = /bits/ 8 <0x30 0xeb 0xd4>; + awinic,tset = /bits/ 8 <0x12>; + awinic,r-spare = /bits/ 8 <0x68>; + + awinic,bemf-upper-threshold = <4104>; + awinic,bemf-lower-threshold = <1016>; + }; +}; + &mpss { status = "okay"; firmware-name = "qcom/sm7225/fairphone4/modem.mdt"; @@ -332,10 +361,28 @@ gpio-reserved-ranges = <13 4>, <56 2>; }; -&uart2 { +&uart9 { status = "okay"; }; +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 156 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l7e>; + vcc-max-microamp = <800000>; + vccq2-supply = <&vreg_l12a>; + vccq2-max-microamp = <800000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l18a>; + vdda-pll-supply = <&vreg_l22a>; +}; + &usb_1 { status = "okay"; }; @@ -359,3 +406,13 @@ vdda-phy-supply = <&vreg_l22a>; vdda-pll-supply = <&vreg_l16a>; }; + +&wifi { + status = "okay"; + + vdd-0.8-cx-mx-supply = <&vreg_l4a>; + vdd-1.8-xo-supply = <&vreg_l7a>; + vdd-1.3-rfa-supply = <&vreg_l2e>; + vdd-3.3-ch0-supply = <&vreg_l10e>; + vdd-3.3-ch1-supply = <&vreg_l11e>; +}; diff --git a/dts/src/arm64/qcom/sm8150.dtsi b/dts/src/arm64/qcom/sm8150.dtsi index 15f3bf2e7e..8ea44c4b56 100644 --- a/dts/src/arm64/qcom/sm8150.dtsi +++ b/dts/src/arm64/qcom/sm8150.dtsi @@ -915,6 +915,33 @@ status = "disabled"; }; + ethernet: ethernet@20000 { + compatible = "qcom,sm8150-ethqos"; + reg = <0x0 0x00020000 0x0 0x10000>, + <0x0 0x00036000 0x0 0x100>; + reg-names = "stmmaceth", "rgmii"; + clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii"; + clocks = <&gcc GCC_EMAC_AXI_CLK>, + <&gcc GCC_EMAC_SLV_AHB_CLK>, + <&gcc GCC_EMAC_PTP_CLK>, + <&gcc GCC_EMAC_RGMII_CLK>; + interrupts = <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_lpi"; + + power-domains = <&gcc EMAC_GDSC>; + resets = <&gcc GCC_EMAC_BCR>; + + iommus = <&apps_smmu 0x3C0 0x0>; + + snps,tso; + rx-fifo-depth = <4096>; + tx-fifo-depth = <4096>; + + status = "disabled"; + }; + + qupv3_id_0: geniqup@8c0000 { compatible = "qcom,geni-se-qup"; reg = <0x0 0x008c0000 0x0 0x6000>; @@ -1746,6 +1773,203 @@ interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; }; + pcie0: pci@1c00000 { + compatible = "qcom,pcie-sm8150", "snps,dw-pcie"; + reg = <0 0x01c00000 0 0x3000>, + <0 0x60000000 0 0xf1d>, + <0 0x60000f20 0 0xa8>, + <0 0x60001000 0 0x1000>, + <0 0x60100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>; + + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "tbu"; + + iommus = <&apps_smmu 0x1d80 0x7f>; + iommu-map = <0x0 &apps_smmu 0x1d80 0x1>, + <0x100 &apps_smmu 0x1d81 0x1>; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_0_GDSC>; + + phys = <&pcie0_lane>; + phy-names = "pciephy"; + + perst-gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>; + enable-gpio = <&tlmm 37 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_default_state>; + + status = "disabled"; + }; + + pcie0_phy: phy@1c06000 { + compatible = "qcom,sm8150-qmp-gen3x1-pcie-phy"; + reg = <0 0x01c06000 0 0x1c0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE0_PHY_REFGEN_CLK>; + clock-names = "aux", "cfg_ahb", "refgen"; + + resets = <&gcc GCC_PCIE_0_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE0_PHY_REFGEN_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie0_lane: phy@1c06200 { + reg = <0 0x1c06200 0 0x170>, /* tx */ + <0 0x1c06400 0 0x200>, /* rx */ + <0 0x1c06800 0 0x1f0>, /* pcs */ + <0 0x1c06c00 0 0xf4>; /* "pcs_lane" same as pcs_misc? */ + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "pipe0"; + + #phy-cells = <0>; + clock-output-names = "pcie_0_pipe_clk"; + }; + }; + + pcie1: pci@1c08000 { + compatible = "qcom,pcie-sm8150", "snps,dw-pcie"; + reg = <0 0x01c08000 0 0x3000>, + <0 0x40000000 0 0xf1d>, + <0 0x40000f20 0 0xa8>, + <0 0x40001000 0 0x1000>, + <0 0x40100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + device_type = "pci"; + linux,pci-domain = <1>; + bus-range = <0x00 0xff>; + num-lanes = <2>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; + + interrupts = <GIC_SPI 307 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, + <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "tbu"; + + assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; + assigned-clock-rates = <19200000>; + + iommus = <&apps_smmu 0x1e00 0x7f>; + iommu-map = <0x0 &apps_smmu 0x1e00 0x1>, + <0x100 &apps_smmu 0x1e01 0x1>; + + resets = <&gcc GCC_PCIE_1_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_1_GDSC>; + + phys = <&pcie1_lane>; + phy-names = "pciephy"; + + perst-gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>; + enable-gpio = <&tlmm 104 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_default_state>; + + status = "disabled"; + }; + + pcie1_phy: phy@1c0e000 { + compatible = "qcom,sm8150-qmp-gen3x2-pcie-phy"; + reg = <0 0x01c0e000 0 0x1c0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE1_PHY_REFGEN_CLK>; + clock-names = "aux", "cfg_ahb", "refgen"; + + resets = <&gcc GCC_PCIE_1_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE1_PHY_REFGEN_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie1_lane: phy@1c0e200 { + reg = <0 0x1c0e200 0 0x170>, /* tx0 */ + <0 0x1c0e400 0 0x200>, /* rx0 */ + <0 0x1c0ea00 0 0x1f0>, /* pcs */ + <0 0x1c0e600 0 0x170>, /* tx1 */ + <0 0x1c0e800 0 0x200>, /* rx1 */ + <0 0x1c0ee00 0 0xf4>; /* "pcs_com" same as pcs_misc? */ + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; + clock-names = "pipe0"; + + #phy-cells = <0>; + clock-output-names = "pcie_1_pipe_clk"; + }; + }; + ufs_mem_hc: ufshc@1d84000 { compatible = "qcom,sm8150-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; @@ -1807,6 +2031,8 @@ clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + power-domains = <&gcc UFS_PHY_GDSC>; + resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; status = "disabled"; @@ -2048,6 +2274,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + wakeup-parent = <&pdc>; qup_i2c0_default: qup-i2c0-default { mux { @@ -2448,6 +2675,52 @@ drive-strength = <6>; bias-disable; }; + + pcie0_default_state: pcie0-default { + perst { + pins = "gpio35"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq { + pins = "gpio36"; + function = "pci_e0"; + drive-strength = <2>; + bias-pull-up; + }; + + wake { + pins = "gpio37"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie1_default_state: pcie1-default { + perst { + pins = "gpio102"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq { + pins = "gpio103"; + function = "pci_e1"; + drive-strength = <2>; + bias-pull-up; + }; + + wake { + pins = "gpio104"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; }; remoteproc_mpss: remoteproc@4080000 { @@ -3270,6 +3543,51 @@ }; }; + sdhc_2: sdhci@8804000 { + compatible = "qcom,sm8150-sdhci", "qcom,sdhci-msm-v5"; + reg = <0 0x08804000 0 0x1000>; + + interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "core", "xo"; + iommus = <&apps_smmu 0x6a0 0x0>; + qcom,dll-config = <0x0007642c>; + qcom,ddr-config = <0x80040868>; + power-domains = <&rpmhpd 0>; + operating-points-v2 = <&sdhc2_opp_table>; + + status = "disabled"; + + sdhc2_opp_table: sdhc2-opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + dc_noc: interconnect@9160000 { compatible = "qcom,sm8150-dc-noc"; reg = <0 0x09160000 0 0x3200>; @@ -3296,11 +3614,15 @@ clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>, <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, - <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, <&gcc GCC_USB3_SEC_CLKREF_CLK>; - clock-names = "cfg_noc", "core", "iface", "mock_utmi", - "sleep", "xo"; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "xo"; assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>; @@ -3317,7 +3639,7 @@ resets = <&gcc GCC_USB30_PRIM_BCR>; - usb_1_dwc3: dwc3@a600000 { + usb_1_dwc3: usb@a600000 { compatible = "snps,dwc3"; reg = <0 0x0a600000 0 0xcd00>; interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; @@ -3341,11 +3663,15 @@ clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, <&gcc GCC_USB30_SEC_MASTER_CLK>, <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, - <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, <&gcc GCC_USB30_SEC_SLEEP_CLK>, + <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, <&gcc GCC_USB3_SEC_CLKREF_CLK>; - clock-names = "cfg_noc", "core", "iface", "mock_utmi", - "sleep", "xo"; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "xo"; assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, <&gcc GCC_USB30_SEC_MASTER_CLK>; @@ -3381,6 +3707,16 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; + pdc: interrupt-controller@b220000 { + compatible = "qcom,sm8150-pdc", "qcom,pdc"; + reg = <0 0x0b220000 0 0x400>; + qcom,pdc-ranges = <0 480 94>, <94 609 31>, + <125 63 1>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + aoss_qmp: power-controller@c300000 { compatible = "qcom,sm8150-aoss-qmp"; reg = <0x0 0x0c300000 0x0 0x400>; @@ -3744,7 +4080,7 @@ }; }; - apps_bcm_voter: bcm_voter { + apps_bcm_voter: bcm-voter { compatible = "qcom,bcm-voter"; }; }; diff --git a/dts/src/arm64/qcom/sm8250-sony-xperia-edo.dtsi b/dts/src/arm64/qcom/sm8250-sony-xperia-edo.dtsi index d63f7a9bc4..e819b5b773 100644 --- a/dts/src/arm64/qcom/sm8250-sony-xperia-edo.dtsi +++ b/dts/src/arm64/qcom/sm8250-sony-xperia-edo.dtsi @@ -441,7 +441,35 @@ status = "okay"; clock-frequency = <1000000>; - /* Dual Cirrus Logic CS35L41 amps @ 40, 41 */ + cs35l41_l: cs35l41@40 { + compatible = "cirrus,cs35l41"; + reg = <0x40>; + interrupt-parent = <&tlmm>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>; + cirrus,boost-peak-milliamp = <4000>; + cirrus,boost-ind-nanohenry = <1000>; + cirrus,boost-cap-microfarad = <15>; + cirrus,asp-sdout-hiz = <3>; + cirrus,gpio2-src-select = <2>; + cirrus,gpio2-output-enable; + #sound-dai-cells = <1>; + }; + + cs35l41_r: cs35l41@41 { + compatible = "cirrus,cs35l41"; + reg = <0x41>; + interrupt-parent = <&tlmm>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>; + cirrus,boost-peak-milliamp = <4000>; + cirrus,boost-ind-nanohenry = <1000>; + cirrus,boost-cap-microfarad = <15>; + cirrus,asp-sdout-hiz = <3>; + cirrus,gpio2-src-select = <2>; + cirrus,gpio2-output-enable; + #sound-dai-cells = <1>; + }; }; &i2c5 { diff --git a/dts/src/arm64/qcom/sm8250.dtsi b/dts/src/arm64/qcom/sm8250.dtsi index 1304b86af1..cf0c97bd5a 100644 --- a/dts/src/arm64/qcom/sm8250.dtsi +++ b/dts/src/arm64/qcom/sm8250.dtsi @@ -18,6 +18,7 @@ #include <dt-bindings/soc/qcom,rpmh-rsc.h> #include <dt-bindings/sound/qcom,q6afe.h> #include <dt-bindings/thermal/thermal.h> +#include <dt-bindings/clock/qcom,camcc-sm8250.h> #include <dt-bindings/clock/qcom,videocc-sm8250.h> / { @@ -2994,11 +2995,15 @@ clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>, <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, - <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, <&gcc GCC_USB3_SEC_CLKREF_EN>; - clock-names = "cfg_noc", "core", "iface", "mock_utmi", - "sleep", "xo"; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "xo"; assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>; @@ -3045,11 +3050,15 @@ clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, <&gcc GCC_USB30_SEC_MASTER_CLK>, <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, - <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, <&gcc GCC_USB30_SEC_SLEEP_CLK>, + <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, <&gcc GCC_USB3_SEC_CLKREF_EN>; - clock-names = "cfg_noc", "core", "iface", "mock_utmi", - "sleep", "xo"; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "xo"; assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, <&gcc GCC_USB30_SEC_MASTER_CLK>; @@ -3153,6 +3162,256 @@ #power-domain-cells = <1>; }; + cci0: cci@ac4f000 { + compatible = "qcom,sm8250-cci"; + #address-cells = <1>; + #size-cells = <0>; + + reg = <0 0x0ac4f000 0 0x1000>; + interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>; + power-domains = <&camcc TITAN_TOP_GDSC>; + + clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>, + <&camcc CAM_CC_SLOW_AHB_CLK_SRC>, + <&camcc CAM_CC_CPAS_AHB_CLK>, + <&camcc CAM_CC_CCI_0_CLK>, + <&camcc CAM_CC_CCI_0_CLK_SRC>; + clock-names = "camnoc_axi", + "slow_ahb_src", + "cpas_ahb", + "cci", + "cci_src"; + + pinctrl-0 = <&cci0_default>; + pinctrl-1 = <&cci0_sleep>; + pinctrl-names = "default", "sleep"; + + status = "disabled"; + + cci0_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci0_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + cci1: cci@ac50000 { + compatible = "qcom,sm8250-cci"; + #address-cells = <1>; + #size-cells = <0>; + + reg = <0 0x0ac50000 0 0x1000>; + interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>; + power-domains = <&camcc TITAN_TOP_GDSC>; + + clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>, + <&camcc CAM_CC_SLOW_AHB_CLK_SRC>, + <&camcc CAM_CC_CPAS_AHB_CLK>, + <&camcc CAM_CC_CCI_1_CLK>, + <&camcc CAM_CC_CCI_1_CLK_SRC>; + clock-names = "camnoc_axi", + "slow_ahb_src", + "cpas_ahb", + "cci", + "cci_src"; + + pinctrl-0 = <&cci1_default>; + pinctrl-1 = <&cci1_sleep>; + pinctrl-names = "default", "sleep"; + + status = "disabled"; + + cci1_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci1_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + camss: camss@ac6a000 { + compatible = "qcom,sm8250-camss"; + status = "disabled"; + + reg = <0 0xac6a000 0 0x2000>, + <0 0xac6c000 0 0x2000>, + <0 0xac6e000 0 0x1000>, + <0 0xac70000 0 0x1000>, + <0 0xac72000 0 0x1000>, + <0 0xac74000 0 0x1000>, + <0 0xacb4000 0 0xd000>, + <0 0xacc3000 0 0xd000>, + <0 0xacd9000 0 0x2200>, + <0 0xacdb200 0 0x2200>; + reg-names = "csiphy0", + "csiphy1", + "csiphy2", + "csiphy3", + "csiphy4", + "csiphy5", + "vfe0", + "vfe1", + "vfe_lite0", + "vfe_lite1"; + + interrupts = <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "csiphy0", + "csiphy1", + "csiphy2", + "csiphy3", + "csiphy4", + "csiphy5", + "csid0", + "csid1", + "csid2", + "csid3", + "vfe0", + "vfe1", + "vfe_lite0", + "vfe_lite1"; + + power-domains = <&camcc IFE_0_GDSC>, + <&camcc IFE_1_GDSC>, + <&camcc TITAN_TOP_GDSC>; + + clocks = <&gcc GCC_CAMERA_AHB_CLK>, + <&gcc GCC_CAMERA_HF_AXI_CLK>, + <&gcc GCC_CAMERA_SF_AXI_CLK>, + <&camcc CAM_CC_CAMNOC_AXI_CLK>, + <&camcc CAM_CC_CAMNOC_AXI_CLK_SRC>, + <&camcc CAM_CC_CORE_AHB_CLK>, + <&camcc CAM_CC_CPAS_AHB_CLK>, + <&camcc CAM_CC_CSIPHY0_CLK>, + <&camcc CAM_CC_CSI0PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY1_CLK>, + <&camcc CAM_CC_CSI1PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY2_CLK>, + <&camcc CAM_CC_CSI2PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY3_CLK>, + <&camcc CAM_CC_CSI3PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY4_CLK>, + <&camcc CAM_CC_CSI4PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY5_CLK>, + <&camcc CAM_CC_CSI5PHYTIMER_CLK>, + <&camcc CAM_CC_SLOW_AHB_CLK_SRC>, + <&camcc CAM_CC_IFE_0_AHB_CLK>, + <&camcc CAM_CC_IFE_0_AXI_CLK>, + <&camcc CAM_CC_IFE_0_CLK>, + <&camcc CAM_CC_IFE_0_CPHY_RX_CLK>, + <&camcc CAM_CC_IFE_0_CSID_CLK>, + <&camcc CAM_CC_IFE_0_AREG_CLK>, + <&camcc CAM_CC_IFE_1_AHB_CLK>, + <&camcc CAM_CC_IFE_1_AXI_CLK>, + <&camcc CAM_CC_IFE_1_CLK>, + <&camcc CAM_CC_IFE_1_CPHY_RX_CLK>, + <&camcc CAM_CC_IFE_1_CSID_CLK>, + <&camcc CAM_CC_IFE_1_AREG_CLK>, + <&camcc CAM_CC_IFE_LITE_AHB_CLK>, + <&camcc CAM_CC_IFE_LITE_AXI_CLK>, + <&camcc CAM_CC_IFE_LITE_CLK>, + <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>, + <&camcc CAM_CC_IFE_LITE_CSID_CLK>; + + clock-names = "cam_ahb_clk", + "cam_hf_axi", + "cam_sf_axi", + "camnoc_axi", + "camnoc_axi_src", + "core_ahb", + "cpas_ahb", + "csiphy0", + "csiphy0_timer", + "csiphy1", + "csiphy1_timer", + "csiphy2", + "csiphy2_timer", + "csiphy3", + "csiphy3_timer", + "csiphy4", + "csiphy4_timer", + "csiphy5", + "csiphy5_timer", + "slow_ahb_src", + "vfe0_ahb", + "vfe0_axi", + "vfe0", + "vfe0_cphy_rx", + "vfe0_csid", + "vfe0_areg", + "vfe1_ahb", + "vfe1_axi", + "vfe1", + "vfe1_cphy_rx", + "vfe1_csid", + "vfe1_areg", + "vfe_lite_ahb", + "vfe_lite_axi", + "vfe_lite", + "vfe_lite_cphy_rx", + "vfe_lite_csid"; + + iommus = <&apps_smmu 0x800 0x400>, + <&apps_smmu 0x801 0x400>, + <&apps_smmu 0x840 0x400>, + <&apps_smmu 0x841 0x400>, + <&apps_smmu 0xc00 0x400>, + <&apps_smmu 0xc01 0x400>, + <&apps_smmu 0xc40 0x400>, + <&apps_smmu 0xc41 0x400>; + + interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_CAMERA_CFG>, + <&mmss_noc MASTER_CAMNOC_HF &mc_virt SLAVE_EBI_CH0>, + <&mmss_noc MASTER_CAMNOC_SF &mc_virt SLAVE_EBI_CH0>, + <&mmss_noc MASTER_CAMNOC_ICP &mc_virt SLAVE_EBI_CH0>; + interconnect-names = "cam_ahb", + "cam_hf_0_mnoc", + "cam_sf_0_mnoc", + "cam_sf_icp_mnoc"; + }; + + camcc: clock-controller@ad00000 { + compatible = "qcom,sm8250-camcc"; + reg = <0 0x0ad00000 0 0x10000>; + clocks = <&gcc GCC_CAMERA_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>; + clock-names = "iface", "bi_tcxo", "bi_tcxo_ao", "sleep_clk"; + power-domains = <&rpmhpd SM8250_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + mdss: mdss@ae00000 { compatible = "qcom,sm8250-mdss"; reg = <0 0x0ae00000 0 0x1000>; @@ -3206,7 +3465,7 @@ power-domains = <&rpmhpd SM8250_MMCX>; interrupt-parent = <&mdss>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <0>; ports { #address-cells = <1>; @@ -3258,7 +3517,7 @@ reg-names = "dsi_ctrl"; interrupt-parent = <&mdss>; - interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <4>; clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, @@ -3331,7 +3590,7 @@ reg-names = "dsi_ctrl"; interrupt-parent = <&mdss>; - interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <5>; clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, @@ -3523,6 +3782,86 @@ gpio-ranges = <&tlmm 0 0 181>; wakeup-parent = <&pdc>; + cci0_default: cci0-default { + cci0_i2c0_default: cci0-i2c0-default { + /* SDA, SCL */ + pins = "gpio101", "gpio102"; + function = "cci_i2c"; + + bias-pull-up; + drive-strength = <2>; /* 2 mA */ + }; + + cci0_i2c1_default: cci0-i2c1-default { + /* SDA, SCL */ + pins = "gpio103", "gpio104"; + function = "cci_i2c"; + + bias-pull-up; + drive-strength = <2>; /* 2 mA */ + }; + }; + + cci0_sleep: cci0-sleep { + cci0_i2c0_sleep: cci0-i2c0-sleep { + /* SDA, SCL */ + pins = "gpio101", "gpio102"; + function = "cci_i2c"; + + drive-strength = <2>; /* 2 mA */ + bias-pull-down; + }; + + cci0_i2c1_sleep: cci0-i2c1-sleep { + /* SDA, SCL */ + pins = "gpio103", "gpio104"; + function = "cci_i2c"; + + drive-strength = <2>; /* 2 mA */ + bias-pull-down; + }; + }; + + cci1_default: cci1-default { + cci1_i2c0_default: cci1-i2c0-default { + /* SDA, SCL */ + pins = "gpio105","gpio106"; + function = "cci_i2c"; + + bias-pull-up; + drive-strength = <2>; /* 2 mA */ + }; + + cci1_i2c1_default: cci1-i2c1-default { + /* SDA, SCL */ + pins = "gpio107","gpio108"; + function = "cci_i2c"; + + bias-pull-up; + drive-strength = <2>; /* 2 mA */ + }; + }; + + cci1_sleep: cci1-sleep { + cci1_i2c0_sleep: cci1-i2c0-sleep { + /* SDA, SCL */ + pins = "gpio105","gpio106"; + function = "cci_i2c"; + + bias-pull-down; + drive-strength = <2>; /* 2 mA */ + }; + + cci1_i2c1_sleep: cci1-i2c1-sleep { + /* SDA, SCL */ + pins = "gpio107","gpio108"; + function = "cci_i2c"; + + bias-pull-down; + drive-strength = <2>; /* 2 mA */ + }; + }; + pri_mi2s_active: pri-mi2s-active { sclk { pins = "gpio138"; @@ -4658,7 +4997,7 @@ }; }; - apps_bcm_voter: bcm_voter { + apps_bcm_voter: bcm-voter { compatible = "qcom,bcm-voter"; }; }; diff --git a/dts/src/arm64/qcom/sm8350-hdk.dts b/dts/src/arm64/qcom/sm8350-hdk.dts index 1e5e9405d8..0fcf5bd88f 100644 --- a/dts/src/arm64/qcom/sm8350-hdk.dts +++ b/dts/src/arm64/qcom/sm8350-hdk.dts @@ -213,6 +213,10 @@ firmware-name = "qcom/sm8350/cdsp.mbn"; }; +&gpi_dma1 { + status = "okay"; +}; + &mpss { status = "okay"; firmware-name = "qcom/sm8350/modem.mbn"; diff --git a/dts/src/arm64/qcom/sm8350-microsoft-surface-duo2.dts b/dts/src/arm64/qcom/sm8350-microsoft-surface-duo2.dts index 9cb1d8455f..9a6faa9393 100644 --- a/dts/src/arm64/qcom/sm8350-microsoft-surface-duo2.dts +++ b/dts/src/arm64/qcom/sm8350-microsoft-surface-duo2.dts @@ -281,6 +281,14 @@ firmware-name = "qcom/sm8350/microsoft/cdsp.mbn"; }; +&i2c10 { + status = "okay"; +}; + +&i2c11 { + status = "okay"; +}; + &ipa { status = "okay"; @@ -296,6 +304,10 @@ status = "okay"; }; +&qupv3_id_1 { + status = "okay"; +}; + &slpi { status = "okay"; firmware-name = "qcom/sm8350/microsoft/slpi.mbn"; diff --git a/dts/src/arm64/qcom/sm8350.dtsi b/dts/src/arm64/qcom/sm8350.dtsi index 20f850b941..743cba9b68 100644 --- a/dts/src/arm64/qcom/sm8350.dtsi +++ b/dts/src/arm64/qcom/sm8350.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-sm8350.h> #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interconnect/qcom,sm8350.h> #include <dt-bindings/mailbox/qcom-ipcc.h> @@ -675,6 +676,28 @@ }; }; + gpi_dma2: dma-controller@800000 { + compatible = "qcom,sm8350-gpi-dma"; + reg = <0 0x00800000 0 0x60000>; + interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <12>; + dma-channel-mask = <0xff>; + iommus = <&apps_smmu 0x5f6 0x0>; + #dma-cells = <3>; + status = "disabled"; + }; + qupv3_id_2: geniqup@8c0000 { compatible = "qcom,geni-se-qup"; reg = <0x0 0x008c0000 0x0 0x6000>; @@ -695,6 +718,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c14_default>; interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>, + <&gpi_dma2 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -708,6 +734,9 @@ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_120mhz>; + dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>, + <&gpi_dma2 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -721,6 +750,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c15_default>; interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>, + <&gpi_dma2 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -734,6 +766,9 @@ interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_120mhz>; + dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>, + <&gpi_dma2 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -747,6 +782,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c16_default>; interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>, + <&gpi_dma2 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -760,6 +798,9 @@ interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>, + <&gpi_dma2 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -773,6 +814,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c17_default>; interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>, + <&gpi_dma2 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -786,6 +830,9 @@ interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>, + <&gpi_dma2 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -801,6 +848,9 @@ interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>, + <&gpi_dma2 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -827,6 +877,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c19_default>; interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>, + <&gpi_dma2 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -840,12 +893,37 @@ interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>, + <&gpi_dma2 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; }; + gpi_dma0: dma-controller@900000 { + compatible = "qcom,sm8350-gpi-dma"; + reg = <0 0x09800000 0 0x60000>; + interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <12>; + dma-channel-mask = <0x7e>; + iommus = <&apps_smmu 0x5b6 0x0>; + #dma-cells = <3>; + status = "disabled"; + }; + qupv3_id_0: geniqup@9c0000 { compatible = "qcom,geni-se-qup"; reg = <0x0 0x009c0000 0x0 0x6000>; @@ -866,6 +944,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c0_default>; interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, + <&gpi_dma0 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -879,6 +960,9 @@ interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, + <&gpi_dma0 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -892,6 +976,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c1_default>; interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, + <&gpi_dma0 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -905,6 +992,9 @@ interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, + <&gpi_dma0 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -918,6 +1008,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c2_default>; interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, + <&gpi_dma0 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -931,6 +1024,9 @@ interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, + <&gpi_dma0 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -961,6 +1057,9 @@ interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, + <&gpi_dma0 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -974,6 +1073,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c4_default>; interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, + <&gpi_dma0 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -987,6 +1089,9 @@ interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, + <&gpi_dma0 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1000,6 +1105,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c5_default>; interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, + <&gpi_dma0 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1013,6 +1121,9 @@ interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, + <&gpi_dma0 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1026,6 +1137,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c6_default>; interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>, + <&gpi_dma0 1 6 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1039,6 +1153,9 @@ interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>, + <&gpi_dma0 1 6 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1065,6 +1182,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c7_default>; interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>, + <&gpi_dma0 1 7 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1078,12 +1198,37 @@ interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>, + <&gpi_dma0 1 7 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; }; + gpi_dma1: dma-controller@a00000 { + compatible = "qcom,sm8350-gpi-dma"; + reg = <0 0x00a00000 0 0x60000>; + interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <12>; + dma-channel-mask = <0xff>; + iommus = <&apps_smmu 0x56 0x0>; + #dma-cells = <3>; + status = "disabled"; + }; + qupv3_id_1: geniqup@ac0000 { compatible = "qcom,geni-se-qup"; reg = <0x0 0x00ac0000 0x0 0x6000>; @@ -1104,6 +1249,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c8_default>; interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, + <&gpi_dma1 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1117,6 +1265,9 @@ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_120mhz>; + dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, + <&gpi_dma1 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1130,6 +1281,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c9_default>; interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, + <&gpi_dma1 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1143,6 +1297,9 @@ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, + <&gpi_dma1 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1156,6 +1313,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c10_default>; interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, + <&gpi_dma1 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1169,6 +1329,9 @@ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, + <&gpi_dma1 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1182,6 +1345,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c11_default>; interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, + <&gpi_dma1 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1195,6 +1361,9 @@ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, + <&gpi_dma1 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1208,6 +1377,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c12_default>; interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, + <&gpi_dma1 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1221,6 +1393,9 @@ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, + <&gpi_dma1 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1234,6 +1409,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c13_default>; interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, + <&gpi_dma1 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1247,6 +1425,9 @@ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>, + <&gpi_dma1 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1881,7 +2062,7 @@ }; }; - apps_bcm_voter: bcm_voter { + apps_bcm_voter: bcm-voter { compatible = "qcom,bcm-voter"; }; }; @@ -1916,7 +2097,6 @@ iommus = <&apps_smmu 0xe0 0x0>; clock-names = - "ref_clk", "core_clk", "bus_aggr_clk", "iface_clk", @@ -1926,7 +2106,6 @@ "rx_lane0_sync_clk", "rx_lane1_sync_clk"; clocks = - <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_UFS_PHY_AXI_CLK>, <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, <&gcc GCC_UFS_PHY_AHB_CLK>, @@ -1937,7 +2116,6 @@ <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; freq-table-hz = <75000000 300000000>, - <75000000 300000000>, <0 0>, <0 0>, <75000000 300000000>, @@ -2271,10 +2449,13 @@ clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>, <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, - <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_PRIM_SLEEP_CLK>; - clock-names = "cfg_noc", "core", "iface", "mock_utmi", - "sleep"; + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>; @@ -2314,11 +2495,15 @@ clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, <&gcc GCC_USB30_SEC_MASTER_CLK>, <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, - <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, <&gcc GCC_USB30_SEC_SLEEP_CLK>, + <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, <&gcc GCC_USB3_SEC_CLKREF_EN>; - clock-names = "cfg_noc", "core", "iface", "mock_utmi", - "sleep", "xo"; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "xo"; assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, <&gcc GCC_USB30_SEC_MASTER_CLK>; diff --git a/dts/src/arm64/qcom/sm8450-hdk.dts b/dts/src/arm64/qcom/sm8450-hdk.dts index f0fcb14284..4e51a9d6af 100644 --- a/dts/src/arm64/qcom/sm8450-hdk.dts +++ b/dts/src/arm64/qcom/sm8450-hdk.dts @@ -349,6 +349,47 @@ }; }; +&pcie0 { + status = "okay"; + max-link-speed = <2>; +}; + +&pcie0_phy { + status = "okay"; + vdda-phy-supply = <&vreg_l5b_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; +}; + +&pcie1 { + status = "okay"; +}; + +&pcie1_phy { + status = "okay"; + vdda-phy-supply = <&vreg_l2h_0p91>; + vdda-pll-supply = <&vreg_l6b_1p2>; +}; + +&remoteproc_adsp { + status = "okay"; + firmware-name = "qcom/sm8450/adsp.mbn"; +}; + +&remoteproc_cdsp { + status = "okay"; + firmware-name = "qcom/sm8450/cdsp.mbn"; +}; + +&remoteproc_mpss { + status = "okay"; + firmware-name = "qcom/sm8450/modem.mbn"; +}; + +&remoteproc_slpi { + status = "okay"; + firmware-name = "qcom/sm8450/slpi.mbn"; +}; + &qupv3_id_0 { status = "okay"; }; diff --git a/dts/src/arm64/qcom/sm8450-qrd.dts b/dts/src/arm64/qcom/sm8450-qrd.dts index 9526632d40..236e53974f 100644 --- a/dts/src/arm64/qcom/sm8450-qrd.dts +++ b/dts/src/arm64/qcom/sm8450-qrd.dts @@ -342,10 +342,32 @@ }; }; +&pcie0 { + status = "okay"; +}; + +&pcie0_phy { + status = "okay"; + vdda-phy-supply = <&vreg_l5b_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; +}; + +&gpi_dma0 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + &qupv3_id_0 { status = "okay"; }; +&qupv3_id_2 { + status = "okay"; +}; + &remoteproc_adsp { status = "okay"; firmware-name = "qcom/sm8450/adsp.mbn"; @@ -366,6 +388,18 @@ firmware-name = "qcom/sm8450/slpi.mbn"; }; +&spi4 { + status = "okay"; +}; + +&spi18 { + status = "okay"; +}; + +&spi19 { + status = "okay"; +}; + &tlmm { gpio-reserved-ranges = <28 4>, <36 4>; }; diff --git a/dts/src/arm64/qcom/sm8450.dtsi b/dts/src/arm64/qcom/sm8450.dtsi index 934e29b9e1..7d08fad763 100644 --- a/dts/src/arm64/qcom/sm8450.dtsi +++ b/dts/src/arm64/qcom/sm8450.dtsi @@ -6,11 +6,13 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-sm8450.h> #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/mailbox/qcom-ipcc.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/interconnect/qcom,sm8450.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> +#include <dt-bindings/thermal/thermal.h> / { interrupt-parent = <&intc>; @@ -47,6 +49,7 @@ power-domains = <&CPU_PD0>; power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; L2_0: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -65,6 +68,7 @@ power-domains = <&CPU_PD1>; power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; L2_100: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -80,6 +84,7 @@ power-domains = <&CPU_PD2>; power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; L2_200: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -95,6 +100,7 @@ power-domains = <&CPU_PD3>; power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; L2_300: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -110,6 +116,7 @@ power-domains = <&CPU_PD4>; power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; L2_400: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -125,6 +132,7 @@ power-domains = <&CPU_PD5>; power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; L2_500: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -141,6 +149,7 @@ power-domains = <&CPU_PD6>; power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; L2_600: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -156,6 +165,7 @@ power-domains = <&CPU_PD7>; power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 2>; + #cooling-cells = <2>; L2_700: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -333,6 +343,25 @@ }; }; + qup_opp_table_100mhz: qup-100mhz-opp-table { + compatible = "operating-points-v2"; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + }; + reserved_memory: reserved-memory { #address-cells = <2>; #size-cells = <2>; @@ -683,8 +712,351 @@ #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; - clock-names = "bi_tcxo", "sleep_clk"; - clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&pcie0_lane>, + <&pcie1_lane>, + <&sleep_clk>; + clock-names = "bi_tcxo", + "pcie_0_pipe_clk", + "pcie_1_pipe_clk", + "sleep_clk"; + }; + + gpi_dma2: dma-controller@800000 { + compatible = "qcom,sm8450-gpi-dma"; + #dma-cells = <3>; + reg = <0 0x800000 0 0x60000>; + interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <12>; + dma-channel-mask = <0x7e>; + iommus = <&apps_smmu 0x496 0x0>; + status = "disabled"; + }; + + qupv3_id_2: geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x008c0000 0x0 0x2000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; + iommus = <&apps_smmu 0x483 0x0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + i2c15: i2c@880000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00880000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c15_data_clk>; + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>, + <&gpi_dma2 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi15: spi@880000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00880000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>; + spi-max-frequency = <50000000>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>, + <&gpi_dma2 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c16: i2c@884000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00884000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c16_data_clk>; + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>, + <&gpi_dma2 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi16: spi@884000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00884000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi16_data_clk>, <&qup_spi16_cs>; + spi-max-frequency = <50000000>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>, + <&gpi_dma2 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c17: i2c@888000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00888000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c17_data_clk>; + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>, + <&gpi_dma2 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi17: spi@888000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00888000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi17_data_clk>, <&qup_spi17_cs>; + spi-max-frequency = <50000000>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>, + <&gpi_dma2 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c18: i2c@88c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x0088c000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c18_data_clk>; + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>, + <&gpi_dma2 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi18: spi@88c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0088c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi18_data_clk>, <&qup_spi18_cs>; + spi-max-frequency = <50000000>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>, + <&gpi_dma2 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c19: i2c@890000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00890000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c19_data_clk>; + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>, + <&gpi_dma2 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi19: spi@890000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00890000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi19_data_clk>, <&qup_spi19_cs>; + spi-max-frequency = <50000000>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>, + <&gpi_dma2 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c20: i2c@894000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00894000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c20_data_clk>; + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>, + <&gpi_dma2 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi20: spi@894000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00894000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi20_data_clk>, <&qup_spi20_cs>; + spi-max-frequency = <50000000>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>, + <&gpi_dma2 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c21: i2c@898000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00898000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c21_data_clk>; + interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma2 0 6 QCOM_GPI_I2C>, + <&gpi_dma2 1 6 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi21: spi@898000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00898000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; + interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi21_data_clk>, <&qup_spi21_cs>; + spi-max-frequency = <50000000>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma2 0 6 QCOM_GPI_SPI>, + <&gpi_dma2 1 6 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + gpi_dma0: dma-controller@900000 { + compatible = "qcom,sm8450-gpi-dma"; + #dma-cells = <3>; + reg = <0 0x900000 0 0x60000>; + interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <12>; + dma-channel-mask = <0x7e>; + iommus = <&apps_smmu 0x5b6 0x0>; + status = "disabled"; }; qupv3_id_0: geniqup@9c0000 { @@ -693,11 +1065,300 @@ clock-names = "m-ahb", "s-ahb"; clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + iommus = <&apps_smmu 0x5a3 0x0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>; + interconnect-names = "qup-core"; #address-cells = <2>; #size-cells = <2>; ranges; status = "disabled"; + i2c0: i2c@980000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00980000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c0_data_clk>; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, + <&gpi_dma0 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi0: spi@980000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00980000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>; + power-domains = <&rpmhpd SM8450_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, + <&gpi_dma0 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@984000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00984000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c1_data_clk>; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, + <&gpi_dma0 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi1: spi@984000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00984000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, + <&gpi_dma0 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@988000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00988000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c2_data_clk>; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, + <&gpi_dma0 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi2: spi@988000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00988000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, + <&gpi_dma0 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + + i2c3: i2c@98c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x0098c000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c3_data_clk>; + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, + <&gpi_dma0 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi3: spi@98c000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x0098c000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, + <&gpi_dma0 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@990000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00990000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c4_data_clk>; + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, + <&gpi_dma0 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi4: spi@990000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00990000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>; + power-domains = <&rpmhpd SM8450_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, + <&gpi_dma0 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@994000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00994000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c5_data_clk>; + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, + <&gpi_dma0 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi5: spi@994000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00994000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, + <&gpi_dma0 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + + i2c6: i2c@998000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x998000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c6_data_clk>; + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>, + <&gpi_dma0 1 6 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi6: spi@998000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x998000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>, + <&gpi_dma0 1 6 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + uart7: serial@99c000 { compatible = "qcom,geni-debug-uart"; reg = <0 0x0099c000 0 0x4000>; @@ -712,17 +1373,242 @@ }; }; + gpi_dma1: dma-controller@a00000 { + compatible = "qcom,sm8450-gpi-dma"; + #dma-cells = <3>; + reg = <0 0xa00000 0 0x60000>; + interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <12>; + dma-channel-mask = <0x7e>; + iommus = <&apps_smmu 0x56 0x0>; + status = "disabled"; + }; + qupv3_id_1: geniqup@ac0000 { compatible = "qcom,geni-se-qup"; reg = <0x0 0x00ac0000 0x0 0x6000>; clock-names = "m-ahb", "s-ahb"; clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + iommus = <&apps_smmu 0x43 0x0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>; + interconnect-names = "qup-core"; #address-cells = <2>; #size-cells = <2>; ranges; status = "disabled"; + i2c8: i2c@a80000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00a80000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c8_data_clk>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, + <&gpi_dma1 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi8: spi@a80000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00a80000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, + <&gpi_dma1 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c9: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00a84000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c9_data_clk>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, + <&gpi_dma1 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi9: spi@a84000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00a84000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, + <&gpi_dma1 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c10: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00a88000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c10_data_clk>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, + <&gpi_dma1 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi10: spi@a88000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00a88000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, + <&gpi_dma1 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c11: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00a8c000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c11_data_clk>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, + <&gpi_dma1 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi11: spi@a8c000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00a8c000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, + <&gpi_dma1 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c12: i2c@a90000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00a90000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c12_data_clk>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, + <&gpi_dma1 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi12: spi@a90000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00a90000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, + <&gpi_dma1 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + i2c13: i2c@a94000 { compatible = "qcom,geni-i2c"; reg = <0 0x00a94000 0 0x4000>; @@ -731,6 +1617,33 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c13_data_clk>; interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, + <&gpi_dma1 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi13: spi@a94000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00a94000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>, + <&gpi_dma1 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -744,12 +1657,257 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c14_data_clk>; interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>, + <&gpi_dma1 1 6 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi14: spi@a98000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00a98000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>, + <&gpi_dma1 1 6 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; }; + pcie0: pci@1c00000 { + compatible = "qcom,pcie-sm8450-pcie0"; + reg = <0 0x01c00000 0 0x3000>, + <0 0x60000000 0 0xf1d>, + <0 0x60000f20 0 0xa8>, + <0 0x60001000 0 0x1000>, + <0 0x60100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>; + + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, + <&gcc GCC_PCIE_0_PIPE_CLK_SRC>, + <&pcie0_lane>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>; + clock-names = "pipe", + "pipe_mux", + "phy_pipe", + "ref", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ddrss_sf_tbu", + "aggre0", + "aggre1"; + + iommus = <&apps_smmu 0x1c00 0x7f>; + iommu-map = <0x0 &apps_smmu 0x1c00 0x1>, + <0x100 &apps_smmu 0x1c01 0x1>; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_0_GDSC>; + power-domain-names = "gdsc"; + + phys = <&pcie0_lane>; + phy-names = "pciephy"; + + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_default_state>; + + status = "disabled"; + }; + + pcie0_phy: phy@1c06000 { + compatible = "qcom,sm8450-qmp-gen3x1-pcie-phy"; + reg = <0 0x01c06000 0 0x200>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_CLKREF_EN>, + <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "refgen"; + + resets = <&gcc GCC_PCIE_0_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie0_lane: phy@1c06200 { + reg = <0 0x1c06e00 0 0x200>, /* tx */ + <0 0x1c07000 0 0x200>, /* rx */ + <0 0x1c06200 0 0x200>, /* pcs */ + <0 0x1c06600 0 0x200>; /* pcs_pcie */ + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "pipe0"; + + #clock-cells = <0>; + #phy-cells = <0>; + clock-output-names = "pcie_0_pipe_clk"; + }; + }; + + pcie1: pci@1c08000 { + compatible = "qcom,pcie-sm8450-pcie1"; + reg = <0 0x01c08000 0 0x3000>, + <0 0x40000000 0 0xf1d>, + <0 0x40000f20 0 0xa8>, + <0 0x40001000 0 0x1000>, + <0 0x40100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + device_type = "pci"; + linux,pci-domain = <1>; + bus-range = <0x00 0xff>; + num-lanes = <2>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x40200000 0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0 0x40300000 0x0 0x1fd00000>; + + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, + <&gcc GCC_PCIE_1_PIPE_CLK_SRC>, + <&pcie1_lane>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>; + clock-names = "pipe", + "pipe_mux", + "phy_pipe", + "ref", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ddrss_sf_tbu", + "aggre1"; + + iommus = <&apps_smmu 0x1c80 0x7f>; + iommu-map = <0x0 &apps_smmu 0x1c80 0x1>, + <0x100 &apps_smmu 0x1c81 0x1>; + + resets = <&gcc GCC_PCIE_1_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_1_GDSC>; + power-domain-names = "gdsc"; + + phys = <&pcie1_lane>; + phy-names = "pciephy"; + + perst-gpio = <&tlmm 97 GPIO_ACTIVE_LOW>; + enable-gpio = <&tlmm 99 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_default_state>; + + status = "disabled"; + }; + + pcie1_phy: phy@1c0f000 { + compatible = "qcom,sm8450-qmp-gen4x2-pcie-phy"; + reg = <0 0x01c0f000 0 0x200>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_CLKREF_EN>, + <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "refgen"; + + resets = <&gcc GCC_PCIE_1_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie1_lane: phy@1c0e000 { + reg = <0 0x1c0e000 0 0x200>, /* tx */ + <0 0x1c0e200 0 0x300>, /* rx */ + <0 0x1c0f200 0 0x200>, /* pcs */ + <0 0x1c0e800 0 0x200>, /* tx */ + <0 0x1c0ea00 0 0x300>, /* rx */ + <0 0x1c0f400 0 0xc00>; /* pcs_pcie */ + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; + clock-names = "pipe0"; + + #clock-cells = <0>; + #phy-cells = <0>; + clock-output-names = "pcie_1_pipe_clk"; + }; + }; + config_noc: interconnect@1500000 { compatible = "qcom,sm8450-config-noc"; reg = <0 0x01500000 0 0x1c000>; @@ -887,6 +2045,33 @@ label = "slpi"; qcom,remote-pid = <3>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "sdsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x0541 0x0>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x0542 0x0>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x0543 0x0>; + /* note: shared-cb = <4> in downstream */ + }; + }; }; }; @@ -927,6 +2112,32 @@ label = "lpass"; qcom,remote-pid = <2>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "adsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1803 0x0>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1804 0x0>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x1805 0x0>; + }; + }; }; }; @@ -967,6 +2178,72 @@ label = "cdsp"; qcom,remote-pid = <5>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "cdsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x2161 0x0400>, + <&apps_smmu 0x1021 0x1420>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x2162 0x0400>, + <&apps_smmu 0x1022 0x1420>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x2163 0x0400>, + <&apps_smmu 0x1023 0x1420>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x2164 0x0400>, + <&apps_smmu 0x1024 0x1420>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x2165 0x0400>, + <&apps_smmu 0x1025 0x1420>; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x2166 0x0400>, + <&apps_smmu 0x1026 0x1420>; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x2167 0x0400>, + <&apps_smmu 0x1027 0x1420>; + }; + + compute-cb@8 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <8>; + iommus = <&apps_smmu 0x2168 0x0400>, + <&apps_smmu 0x1028 0x1420>; + }; + + /* note: secure cb9 in downstream */ + }; }; }; @@ -1021,6 +2298,28 @@ interrupt-controller; }; + tsens0: thermal-sensor@c263000 { + compatible = "qcom,sm8450-tsens", "qcom,tsens-v2"; + reg = <0 0x0c263000 0 0x1000>, /* TM */ + <0 0x0c222000 0 0x1000>; /* SROT */ + #qcom,sensors = <16>; + interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c265000 { + compatible = "qcom,sm8450-tsens", "qcom,tsens-v2"; + reg = <0 0x0c265000 0 0x1000>, /* TM */ + <0 0x0c223000 0 0x1000>; /* SROT */ + #qcom,sensors = <16>; + interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + aoss_qmp: power-controller@c300000 { compatible = "qcom,sm8450-aoss-qmp", "qcom,aoss-qmp"; reg = <0 0x0c300000 0 0x400>; @@ -1051,6 +2350,112 @@ gpio-ranges = <&tlmm 0 0 211>; wakeup-parent = <&pdc>; + pcie0_default_state: pcie0-default-state { + perst { + pins = "gpio94"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq { + pins = "gpio95"; + function = "pcie0_clkreqn"; + drive-strength = <2>; + bias-pull-up; + }; + + wake { + pins = "gpio96"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie1_default_state: pcie1-default-state { + perst { + pins = "gpio97"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq { + pins = "gpio98"; + function = "pcie1_clkreqn"; + drive-strength = <2>; + bias-pull-up; + }; + + wake { + pins = "gpio99"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + qup_i2c0_data_clk: qup-i2c0-data-clk { + pins = "gpio0", "gpio1"; + function = "qup0"; + }; + + qup_i2c1_data_clk: qup-i2c1-data-clk { + pins = "gpio4", "gpio5"; + function = "qup1"; + }; + + qup_i2c2_data_clk: qup-i2c2-data-clk { + pins = "gpio8", "gpio9"; + function = "qup2"; + }; + + qup_i2c3_data_clk: qup-i2c3-data-clk { + pins = "gpio12", "gpio13"; + function = "qup3"; + }; + + qup_i2c4_data_clk: qup-i2c4-data-clk { + pins = "gpio16", "gpio17"; + function = "qup4"; + }; + + qup_i2c5_data_clk: qup-i2c5-data-clk { + pins = "gpio206", "gpio207"; + function = "qup5"; + }; + + qup_i2c6_data_clk: qup-i2c6-data-clk { + pins = "gpio20", "gpio21"; + function = "qup6"; + }; + + qup_i2c8_data_clk: qup-i2c8-data-clk { + pins = "gpio28", "gpio29"; + function = "qup8"; + }; + + qup_i2c9_data_clk: qup-i2c9-data-clk { + pins = "gpio32", "gpio33"; + function = "qup9"; + }; + + qup_i2c10_data_clk: qup-i2c10-data-clk { + pins = "gpio36", "gpio37"; + function = "qup10"; + }; + + qup_i2c11_data_clk: qup-i2c11-data-clk { + pins = "gpio40", "gpio41"; + function = "qup11"; + }; + + qup_i2c12_data_clk: qup-i2c12-data-clk { + pins = "gpio44", "gpio45"; + function = "qup12"; + }; + qup_i2c13_data_clk: qup-i2c13-data-clk { pins = "gpio48", "gpio49"; function = "qup13"; @@ -1065,6 +2470,261 @@ bias-pull-up; }; + qup_i2c15_data_clk: qup-i2c15-data-clk { + pins = "gpio56", "gpio57"; + function = "qup15"; + }; + + qup_i2c16_data_clk: qup-i2c16-data-clk { + pins = "gpio60", "gpio61"; + function = "qup16"; + }; + + qup_i2c17_data_clk: qup-i2c17-data-clk { + pins = "gpio64", "gpio65"; + function = "qup17"; + }; + + qup_i2c18_data_clk: qup-i2c18-data-clk { + pins = "gpio68", "gpio69"; + function = "qup18"; + }; + + qup_i2c19_data_clk: qup-i2c19-data-clk { + pins = "gpio72", "gpio73"; + function = "qup19"; + }; + + qup_i2c20_data_clk: qup-i2c20-data-clk { + pins = "gpio76", "gpio77"; + function = "qup20"; + }; + + qup_i2c21_data_clk: qup-i2c21-data-clk { + pins = "gpio80", "gpio81"; + function = "qup21"; + }; + + qup_spi0_cs: qup-spi0-cs { + pins = "gpio3"; + function = "qup0"; + }; + + qup_spi0_data_clk: qup-spi0-data-clk { + pins = "gpio0", "gpio1", "gpio2"; + function = "qup0"; + }; + + qup_spi1_cs: qup-spi1-cs { + pins = "gpio7"; + function = "qup1"; + }; + + qup_spi1_data_clk: qup-spi1-data-clk { + pins = "gpio4", "gpio5", "gpio6"; + function = "qup1"; + }; + + qup_spi2_cs: qup-spi2-cs { + pins = "gpio11"; + function = "qup2"; + }; + + qup_spi2_data_clk: qup-spi2-data-clk { + pins = "gpio8", "gpio9", "gpio10"; + function = "qup2"; + }; + + qup_spi3_cs: qup-spi3-cs { + pins = "gpio15"; + function = "qup3"; + }; + + qup_spi3_data_clk: qup-spi3-data-clk { + pins = "gpio12", "gpio13", "gpio14"; + function = "qup3"; + }; + + qup_spi4_cs: qup-spi4-cs { + pins = "gpio19"; + function = "qup4"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi4_data_clk: qup-spi4-data-clk { + pins = "gpio16", "gpio17", "gpio18"; + function = "qup4"; + }; + + qup_spi5_cs: qup-spi5-cs { + pins = "gpio85"; + function = "qup5"; + }; + + qup_spi5_data_clk: qup-spi5-data-clk { + pins = "gpio206", "gpio207", "gpio84"; + function = "qup5"; + }; + + qup_spi6_cs: qup-spi6-cs { + pins = "gpio23"; + function = "qup6"; + }; + + qup_spi6_data_clk: qup-spi6-data-clk { + pins = "gpio20", "gpio21", "gpio22"; + function = "qup6"; + }; + + qup_spi8_cs: qup-spi8-cs { + pins = "gpio31"; + function = "qup8"; + }; + + qup_spi8_data_clk: qup-spi8-data-clk { + pins = "gpio28", "gpio29", "gpio30"; + function = "qup8"; + }; + + qup_spi9_cs: qup-spi9-cs { + pins = "gpio35"; + function = "qup9"; + }; + + qup_spi9_data_clk: qup-spi9-data-clk { + pins = "gpio32", "gpio33", "gpio34"; + function = "qup9"; + }; + + qup_spi10_cs: qup-spi10-cs { + pins = "gpio39"; + function = "qup10"; + }; + + qup_spi10_data_clk: qup-spi10-data-clk { + pins = "gpio36", "gpio37", "gpio38"; + function = "qup10"; + }; + + qup_spi11_cs: qup-spi11-cs { + pins = "gpio43"; + function = "qup11"; + }; + + qup_spi11_data_clk: qup-spi11-data-clk { + pins = "gpio40", "gpio41", "gpio42"; + function = "qup11"; + }; + + qup_spi12_cs: qup-spi12-cs { + pins = "gpio47"; + function = "qup12"; + }; + + qup_spi12_data_clk: qup-spi12-data-clk { + pins = "gpio44", "gpio45", "gpio46"; + function = "qup12"; + }; + + qup_spi13_cs: qup-spi13-cs { + pins = "gpio51"; + function = "qup13"; + }; + + qup_spi13_data_clk: qup-spi13-data-clk { + pins = "gpio48", "gpio49", "gpio50"; + function = "qup13"; + }; + + qup_spi14_cs: qup-spi14-cs { + pins = "gpio55"; + function = "qup14"; + }; + + qup_spi14_data_clk: qup-spi14-data-clk { + pins = "gpio52", "gpio53", "gpio54"; + function = "qup14"; + }; + + qup_spi15_cs: qup-spi15-cs { + pins = "gpio59"; + function = "qup15"; + }; + + qup_spi15_data_clk: qup-spi15-data-clk { + pins = "gpio56", "gpio57", "gpio58"; + function = "qup15"; + }; + + qup_spi16_cs: qup-spi16-cs { + pins = "gpio63"; + function = "qup16"; + }; + + qup_spi16_data_clk: qup-spi16-data-clk { + pins = "gpio60", "gpio61", "gpio62"; + function = "qup16"; + }; + + qup_spi17_cs: qup-spi17-cs { + pins = "gpio67"; + function = "qup17"; + }; + + qup_spi17_data_clk: qup-spi17-data-clk { + pins = "gpio64", "gpio65", "gpio66"; + function = "qup17"; + }; + + qup_spi18_cs: qup-spi18-cs { + pins = "gpio71"; + function = "qup18"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi18_data_clk: qup-spi18-data-clk { + pins = "gpio68", "gpio69", "gpio70"; + function = "qup18"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi19_cs: qup-spi19-cs { + pins = "gpio75"; + function = "qup19"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi19_data_clk: qup-spi19-data-clk { + pins = "gpio72", "gpio73", "gpio74"; + function = "qup19"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi20_cs: qup-spi20-cs { + pins = "gpio79"; + function = "qup20"; + }; + + qup_spi20_data_clk: qup-spi20-data-clk { + pins = "gpio76", "gpio77", "gpio78"; + function = "qup20"; + }; + + qup_spi21_cs: qup-spi21-cs { + pins = "gpio83"; + function = "qup21"; + }; + + qup_spi21_data_clk: qup-spi21-data-clk { + pins = "gpio80", "gpio81", "gpio82"; + function = "qup21"; + }; + qup_uart7_rx: qup-uart7-rx { pins = "gpio26"; function = "qup7"; @@ -1425,7 +3085,7 @@ reset-names = "ufsphy"; status = "disabled"; - ufs_mem_phy_lanes: lanes@1d87400 { + ufs_mem_phy_lanes: phy@1d87400 { reg = <0 0x01d87400 0 0x108>, <0 0x01d87600 0 0x1e0>, <0 0x01d87c00 0 0x1dc>, @@ -1447,22 +3107,28 @@ clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>, <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, - <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, <&gcc GCC_USB3_0_CLKREF_EN>; - clock-names = "cfg_noc", "core", "iface", "mock_utmi", - "sleep", "xo"; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "xo"; assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>; assigned-clock-rates = <19200000>, <200000000>; interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 14 IRQ_TYPE_EDGE_BOTH>, + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>, <&pdc 15 IRQ_TYPE_EDGE_BOTH>, - <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hs_phy_irq", "dp_hs_phy_irq", - "dm_hs_phy_irq", "ss_phy_irq"; + <&pdc 14 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "hs_phy_irq", + "ss_phy_irq", + "dm_hs_phy_irq", + "dp_hs_phy_irq"; power-domains = <&gcc USB30_PRIM_GDSC>; @@ -1495,6 +3161,840 @@ }; }; + thermal-zones { + aoss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 0>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpuss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 1>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpuss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 2>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpuss3-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 3>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpuss4-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 4>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpu4-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 5>; + + trips { + cpu4_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_top_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu4-bottom-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 6>; + + trips { + cpu4_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_bottom_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu5-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 7>; + + trips { + cpu5_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_top_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu5-bottom-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 8>; + + trips { + cpu5_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_bottom_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu6-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 9>; + + trips { + cpu6_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_top_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu6-bottom-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 10>; + + trips { + cpu6_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_bottom_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu7-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 11>; + + trips { + cpu7_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_top_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu7-middle-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 12>; + + trips { + cpu7_middle_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_middle_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_middle_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu7-bottom-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 13>; + + trips { + cpu7_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_bottom_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpu-top-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens0 14>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + gpu0_tj_cfg: tj_cfg { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + gpu-bottom-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens0 15>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + gpu1_tj_cfg: tj_cfg { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + aoss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 0>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpu0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 1>; + + trips { + cpu0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 2>; + + trips { + cpu1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 3>; + + trips { + cpu2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 4>; + + trips { + cpu3_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cdsp0-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens1 5>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cdsp_0_config: junction-config { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cdsp1-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens1 6>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cdsp_1_config: junction-config { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cdsp2-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens1 7>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cdsp_2_config: junction-config { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 8>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + mem-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens1 9>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + ddr_config0: ddr0-config { + temperature = <90000>; + hysteresis = <5000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + modem0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 10>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + mdmss0_config0: mdmss0-config0 { + temperature = <102000>; + hysteresis = <3000>; + type = "passive"; + }; + + mdmss0_config1: mdmss0-config1 { + temperature = <105000>; + hysteresis = <3000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + modem1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 11>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + mdmss1_config0: mdmss1-config0 { + temperature = <102000>; + hysteresis = <3000>; + type = "passive"; + }; + + mdmss1_config1: mdmss1-config1 { + temperature = <105000>; + hysteresis = <3000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + modem2-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 12>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + mdmss2_config0: mdmss2-config0 { + temperature = <102000>; + hysteresis = <3000>; + type = "passive"; + }; + + mdmss2_config1: mdmss2-config1 { + temperature = <105000>; + hysteresis = <3000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + modem3-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 13>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + mdmss3_config0: mdmss3-config0 { + temperature = <102000>; + hysteresis = <3000>; + type = "passive"; + }; + + mdmss3_config1: mdmss3-config1 { + temperature = <105000>; + hysteresis = <3000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + camera0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 14>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + camera1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 15>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, |