diff options
Diffstat (limited to 'dts/src/arm64/renesas')
41 files changed, 2725 insertions, 423 deletions
diff --git a/dts/src/arm64/renesas/beacon-renesom-baseboard.dtsi b/dts/src/arm64/renesas/beacon-renesom-baseboard.dtsi index 2692cc64bf..5ad6cd1864 100644 --- a/dts/src/arm64/renesas/beacon-renesom-baseboard.dtsi +++ b/dts/src/arm64/renesas/beacon-renesom-baseboard.dtsi @@ -359,11 +359,10 @@ clocks = <&x304_clk>; clock-names = "xin"; - assigned-clocks = <&versaclock6_bb 1>, - <&versaclock6_bb 2>, - <&versaclock6_bb 3>, - <&versaclock6_bb 4>; - assigned-clock-rates = <24000000>, <24000000>, <24000000>, <24576000>; + assigned-clocks = <&versaclock6_bb 1>, <&versaclock6_bb 2>, + <&versaclock6_bb 3>, <&versaclock6_bb 4>; + assigned-clock-rates = <24000000>, <24000000>, <24000000>, + <24576000>; OUT1 { idt,mode = <VC5_CMOS>; diff --git a/dts/src/arm64/renesas/beacon-renesom-som.dtsi b/dts/src/arm64/renesas/beacon-renesom-som.dtsi index 0d136809eb..877d076ffc 100644 --- a/dts/src/arm64/renesas/beacon-renesom-som.dtsi +++ b/dts/src/arm64/renesas/beacon-renesom-som.dtsi @@ -77,7 +77,7 @@ }; &gpio6 { - usb_hub_reset { + usb-hub-reset-hog { gpio-hog; gpios = <10 GPIO_ACTIVE_HIGH>; output-high; @@ -293,7 +293,6 @@ vqmmc-supply = <®_1p8v>; non-removable; cap-power-off-card; - pm-ignore-notify; keep-power-in-suspend; mmc-pwrseq = <&wlan_pwrseq>; status = "okay"; diff --git a/dts/src/arm64/renesas/gmsl-cameras.dtsi b/dts/src/arm64/renesas/gmsl-cameras.dtsi new file mode 100644 index 0000000000..d45f072f8c --- /dev/null +++ b/dts/src/arm64/renesas/gmsl-cameras.dtsi @@ -0,0 +1,332 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2017 Ideas on Board <kieran.bingham@ideasonboard.com> + * Copyright (C) 2021 Jacopo Mondi <jacopo+renesas@jmondi.org> + * + * Device Tree Source (overlay) that describes GMSL camera connected to + * Fakra connectors for the Eagle V3M and Condor V3H (and compatible) boards. + * + * The following cameras are currently supported: RDACM20 and RDACM21. + * + * The board .dts file that include this has to select which cameras are in use + * by specifying the camera model with: + * + * #define GMSL_CAMERA_RDACM20 + * or + * #define GMSL_CAMERA_RDACM21 + * + * And which cameras are connected to the board by defining: + * for GMSL channel 0: + * #define GMSL_CAMERA_0 + * #define GMSL_CAMERA_1 + * #define GMSL_CAMERA_2 + * #define GMSL_CAMERA_3 + * + * for GMSL channel 1: + * #define GMSL_CAMERA_4 + * #define GMSL_CAMERA_5 + * #define GMSL_CAMERA_6 + * #define GMSL_CAMERA_7 + */ + +#include <dt-bindings/gpio/gpio.h> + +/* Validate the board file settings. */ +#if !defined(GMSL_CAMERA_RDACM20) && !defined(GMSL_CAMERA_RDACM21) +#error "Camera model should be defined by the board file" +#endif + +#if defined(GMSL_CAMERA_RDACM20) && defined(GMSL_CAMERA_RDACM21) +#error "A single camera model should be selected" +#endif + +#if !defined(GMSL_CAMERA_0) && !defined(GMSL_CAMERA_1) && \ + !defined(GMSL_CAMERA_2) && !defined(GMSL_CAMERA_3) && \ + !defined(GMSL_CAMERA_4) && !defined(GMSL_CAMERA_5) && \ + !defined(GMSL_CAMERA_6) && !defined(GMSL_CAMERA_7) +#error "At least one camera should be selected" +#endif + +/* Deduce from the enabled cameras which GMSL channels are active. */ +#if defined(GMSL_CAMERA_0) || defined(GMSL_CAMERA_1) || \ + defined(GMSL_CAMERA_2) || defined(GMSL_CAMERA_3) +#define GMSL_0 +#endif + +#if defined(GMSL_CAMERA_4) || defined(GMSL_CAMERA_5) || \ + defined(GMSL_CAMERA_6) || defined(GMSL_CAMERA_7) +#define GMSL_1 +#endif + +/* Deduce the camera model compatible string. */ +#if defined(GMSL_CAMERA_RDACM20) +#define GMSL_CAMERA_MODEL "imi,rdacm20" +#elif defined(GMSL_CAMERA_RDACM21) +#define GMSL_CAMERA_MODEL "imi,rdacm21" +#endif + +#ifdef GMSL_0 +&vin0 { + status = "okay"; +}; + +&vin1 { + status = "okay"; +}; + +&vin2 { + status = "okay"; +}; + +&vin3 { + status = "okay"; +}; + +&gmsl0 { + status = "okay"; + +#if defined(GMSL_CAMERA_RDACM21) + maxim,reverse-channel-microvolt = <100000>; +#endif + + ports { +#ifdef GMSL_CAMERA_0 + port@0 { + max9286_in0: endpoint { + remote-endpoint = <&fakra_con0>; + }; + }; +#endif + +#ifdef GMSL_CAMERA_1 + port@1 { + max9286_in1: endpoint{ + remote-endpoint = <&fakra_con1>; + }; + + }; +#endif + +#ifdef GMSL_CAMERA_2 + port@2 { + max9286_in2: endpoint { + remote-endpoint = <&fakra_con2>; + }; + + }; +#endif + +#ifdef GMSL_CAMERA_3 + port@3 { + max9286_in3: endpoint { + remote-endpoint = <&fakra_con3>; + }; + + }; +#endif + }; + + i2c-mux { +#ifdef GMSL_CAMERA_0 + i2c@0 { + status = "okay"; + + camera@51 { + compatible = GMSL_CAMERA_MODEL; + reg = <0x51>, <0x61>; + + port { + fakra_con0: endpoint { + remote-endpoint = <&max9286_in0>; + }; + }; + }; + }; +#endif + +#ifdef GMSL_CAMERA_1 + i2c@1 { + status = "okay"; + + camera@52 { + compatible = GMSL_CAMERA_MODEL; + reg = <0x52>, <0x62>; + + port { + fakra_con1: endpoint { + remote-endpoint = <&max9286_in1>; + }; + }; + }; + }; +#endif + +#ifdef GMSL_CAMERA_2 + i2c@2 { + status = "okay"; + + camera@53 { + compatible = GMSL_CAMERA_MODEL; + reg = <0x53>, <0x63>; + + port { + fakra_con2: endpoint { + remote-endpoint = <&max9286_in2>; + }; + }; + }; + }; +#endif + +#ifdef GMSL_CAMERA_3 + i2c@3 { + status = "okay"; + + camera@54 { + compatible = GMSL_CAMERA_MODEL; + reg = <0x54>, <0x64>; + + port { + fakra_con3: endpoint { + remote-endpoint = <&max9286_in3>; + }; + }; + }; + }; +#endif + }; +}; +#endif /* ifdef GMSL_0 */ + +#ifdef GMSL_1 +&vin4 { + status = "okay"; +}; + +&vin5 { + status = "okay"; +}; + +&vin6 { + status = "okay"; +}; + +&vin7 { + status = "okay"; +}; + +&gmsl1 { + status = "okay"; + +#if defined(GMSL_CAMERA_RDACM21) + maxim,reverse-channel-microvolt = <100000>; +#endif + + ports { +#ifdef GMSL_CAMERA_4 + port@0 { + max9286_in4: endpoint { + remote-endpoint = <&fakra_con4>; + }; + }; +#endif + +#ifdef GMSL_CAMERA_5 + port@1 { + max9286_in5: endpoint{ + remote-endpoint = <&fakra_con5>; + }; + + }; +#endif + +#ifdef GMSL_CAMERA_6 + port@2 { + max9286_in6: endpoint { + remote-endpoint = <&fakra_con6>; + }; + + }; +#endif + +#ifdef GMSL_CAMERA_7 + port@3 { + max9286_in7: endpoint { + remote-endpoint = <&fakra_con7>; + }; + + }; +#endif + }; + + i2c-mux { +#ifdef GMSL_CAMERA_4 + i2c@0 { + status = "okay"; + + camera@55 { + compatible = GMSL_CAMERA_MODEL; + reg = <0x55>, <0x65>; + + port { + fakra_con4: endpoint { + remote-endpoint = <&max9286_in4>; + }; + }; + }; + }; +#endif + +#ifdef GMSL_CAMERA_5 + i2c@1 { + status = "okay"; + + camera@56 { + compatible = GMSL_CAMERA_MODEL; + reg = <0x56>, <0x66>; + + port { + fakra_con5: endpoint { + remote-endpoint = <&max9286_in5>; + }; + }; + }; + }; +#endif + +#ifdef GMSL_CAMERA_6 + i2c@2 { + status = "okay"; + + camera@57 { + compatible = GMSL_CAMERA_MODEL; + reg = <0x57>, <0x67>; + + port { + fakra_con6: endpoint { + remote-endpoint = <&max9286_in6>; + }; + }; + }; + }; +#endif + +#ifdef GMSL_CAMERA_7 + i2c@3 { + status = "okay"; + + camera@58 { + compatible = GMSL_CAMERA_MODEL; + reg = <0x58>, <0x68>; + + port { + fakra_con7: endpoint { + remote-endpoint = <&max9286_in7>; + }; + }; + }; + }; +#endif + }; +}; +#endif /* ifdef GMSL_1 */ diff --git a/dts/src/arm64/renesas/hihope-common.dtsi b/dts/src/arm64/renesas/hihope-common.dtsi index 0c7e6f7905..935d06515a 100644 --- a/dts/src/arm64/renesas/hihope-common.dtsi +++ b/dts/src/arm64/renesas/hihope-common.dtsi @@ -140,7 +140,7 @@ }; &gpio6 { - usb1-reset { + usb1-reset-hog { gpio-hog; gpios = <10 GPIO_ACTIVE_LOW>; output-low; diff --git a/dts/src/arm64/renesas/hihope-rzg2-ex-lvds.dtsi b/dts/src/arm64/renesas/hihope-rzg2-ex-lvds.dtsi index 40c5e8d6d8..d66d17e346 100644 --- a/dts/src/arm64/renesas/hihope-rzg2-ex-lvds.dtsi +++ b/dts/src/arm64/renesas/hihope-rzg2-ex-lvds.dtsi @@ -20,7 +20,7 @@ * When GP1_20 is LOW LVDS0 is connected to the LVDS connector * When GP1_20 is HIGH LVDS0 is connected to the LT8918L */ - lvds-connector-en-gpio { + lvds-connector-en-hog { gpio-hog; gpios = <20 GPIO_ACTIVE_HIGH>; output-low; diff --git a/dts/src/arm64/renesas/r8a774a1.dtsi b/dts/src/arm64/renesas/r8a774a1.dtsi index eda6a84037..12846125a4 100644 --- a/dts/src/arm64/renesas/r8a774a1.dtsi +++ b/dts/src/arm64/renesas/r8a774a1.dtsi @@ -1698,12 +1698,12 @@ * clkout : #clock-cells = <0>; <&rcar_sound>; * clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>; */ - compatible = "renesas,rcar_sound-r8a774a1", "renesas,rcar_sound-gen3"; - reg = <0 0xec500000 0 0x1000>, /* SCU */ - <0 0xec5a0000 0 0x100>, /* ADG */ - <0 0xec540000 0 0x1000>, /* SSIU */ - <0 0xec541000 0 0x280>, /* SSI */ - <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/ + compatible = "renesas,rcar_sound-r8a774a1", "renesas,rcar_sound-gen3"; + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x280>, /* SSI */ + <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; clocks = <&cpg CPG_MOD 1005>, @@ -2010,7 +2010,7 @@ dma-names = "rx", "tx"; }; ssiu40: ssiu-32 { - dmas = <&audma0 0x71>, <&audma1 0x72>; + dmas = <&audma0 0x71>, <&audma1 0x72>; dma-names = "rx", "tx"; }; ssiu41: ssiu-33 { diff --git a/dts/src/arm64/renesas/r8a774b1-beacon-rzg2n-kit.dts b/dts/src/arm64/renesas/r8a774b1-beacon-rzg2n-kit.dts index 3c0d59def8..89d708346b 100644 --- a/dts/src/arm64/renesas/r8a774b1-beacon-rzg2n-kit.dts +++ b/dts/src/arm64/renesas/r8a774b1-beacon-rzg2n-kit.dts @@ -11,7 +11,7 @@ / { model = "Beacon Embedded Works RZ/G2N Development Kit"; - compatible = "beacon,beacon-rzg2n", "renesas,r8a774b1"; + compatible = "beacon,beacon-rzg2n", "renesas,r8a774b1"; aliases { serial0 = &scif2; diff --git a/dts/src/arm64/renesas/r8a774b1.dtsi b/dts/src/arm64/renesas/r8a774b1.dtsi index 44f79fbd75..a4b406a346 100644 --- a/dts/src/arm64/renesas/r8a774b1.dtsi +++ b/dts/src/arm64/renesas/r8a774b1.dtsi @@ -1571,7 +1571,7 @@ * clkout : #clock-cells = <0>; <&rcar_sound>; * clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>; */ - compatible = "renesas,rcar_sound-r8a774b1", "renesas,rcar_sound-gen3"; + compatible = "renesas,rcar_sound-r8a774b1", "renesas,rcar_sound-gen3"; reg = <0 0xec500000 0 0x1000>, /* SCU */ <0 0xec5a0000 0 0x100>, /* ADG */ <0 0xec540000 0 0x1000>, /* SSIU */ @@ -1883,7 +1883,7 @@ dma-names = "rx", "tx"; }; ssiu40: ssiu-32 { - dmas = <&audma0 0x71>, <&audma1 0x72>; + dmas = <&audma0 0x71>, <&audma1 0x72>; dma-names = "rx", "tx"; }; ssiu41: ssiu-33 { diff --git a/dts/src/arm64/renesas/r8a774c0-ek874-idk-2121wr.dts b/dts/src/arm64/renesas/r8a774c0-ek874-idk-2121wr.dts index a7b27d09f6..c1812d1ef0 100644 --- a/dts/src/arm64/renesas/r8a774c0-ek874-idk-2121wr.dts +++ b/dts/src/arm64/renesas/r8a774c0-ek874-idk-2121wr.dts @@ -68,7 +68,7 @@ * When GP0_17 is low LVDS[01] are connected to the LVDS connector * When GP0_17 is high LVDS[01] are connected to the LT8918L */ - lvds-connector-en-gpio{ + lvds-connector-en-hog { gpio-hog; gpios = <17 GPIO_ACTIVE_HIGH>; output-low; diff --git a/dts/src/arm64/renesas/r8a774c0.dtsi b/dts/src/arm64/renesas/r8a774c0.dtsi index b8dcbbbf3d..e123c8d1ba 100644 --- a/dts/src/arm64/renesas/r8a774c0.dtsi +++ b/dts/src/arm64/renesas/r8a774c0.dtsi @@ -1328,11 +1328,11 @@ */ compatible = "renesas,rcar_sound-r8a774c0", "renesas,rcar_sound-gen3"; - reg = <0 0xec500000 0 0x1000>, /* SCU */ - <0 0xec5a0000 0 0x100>, /* ADG */ - <0 0xec540000 0 0x1000>, /* SSIU */ - <0 0xec541000 0 0x280>, /* SSI */ - <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/ + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x280>, /* SSI */ + <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; clocks = <&cpg CPG_MOD 1005>, diff --git a/dts/src/arm64/renesas/r8a774e1-beacon-rzg2h-kit.dts b/dts/src/arm64/renesas/r8a774e1-beacon-rzg2h-kit.dts index 7b6649a3de..3e9ced3b2d 100644 --- a/dts/src/arm64/renesas/r8a774e1-beacon-rzg2h-kit.dts +++ b/dts/src/arm64/renesas/r8a774e1-beacon-rzg2h-kit.dts @@ -11,7 +11,7 @@ / { model = "Beacon Embedded Works RZ/G2H Development Kit"; - compatible = "beacon,beacon-rzg2h", "renesas,r8a774e1"; + compatible = "beacon,beacon-rzg2h", "renesas,r8a774e1"; aliases { serial0 = &scif2; diff --git a/dts/src/arm64/renesas/r8a774e1.dtsi b/dts/src/arm64/renesas/r8a774e1.dtsi index e6d8610730..989c1c00dc 100644 --- a/dts/src/arm64/renesas/r8a774e1.dtsi +++ b/dts/src/arm64/renesas/r8a774e1.dtsi @@ -1784,7 +1784,7 @@ * clkout : #clock-cells = <0>; <&rcar_sound>; * clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>; */ - compatible = "renesas,rcar_sound-r8a774e1", "renesas,rcar_sound-gen3"; + compatible = "renesas,rcar_sound-r8a774e1", "renesas,rcar_sound-gen3"; reg = <0 0xec500000 0 0x1000>, /* SCU */ <0 0xec5a0000 0 0x100>, /* ADG */ <0 0xec540000 0 0x1000>, /* SSIU */ @@ -2043,7 +2043,7 @@ dma-names = "rx", "tx"; }; ssiu40: ssiu-32 { - dmas = <&audma0 0x71>, <&audma1 0x72>; + dmas = <&audma0 0x71>, <&audma1 0x72>; dma-names = "rx", "tx"; }; ssiu41: ssiu-33 { diff --git a/dts/src/arm64/renesas/r8a77951.dtsi b/dts/src/arm64/renesas/r8a77951.dtsi index 9265a57027..4e87e8776a 100644 --- a/dts/src/arm64/renesas/r8a77951.dtsi +++ b/dts/src/arm64/renesas/r8a77951.dtsi @@ -2018,12 +2018,12 @@ * clkout : #clock-cells = <0>; <&rcar_sound>; * clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>; */ - compatible = "renesas,rcar_sound-r8a7795", "renesas,rcar_sound-gen3"; - reg = <0 0xec500000 0 0x1000>, /* SCU */ - <0 0xec5a0000 0 0x100>, /* ADG */ - <0 0xec540000 0 0x1000>, /* SSIU */ - <0 0xec541000 0 0x280>, /* SSI */ - <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/ + compatible = "renesas,rcar_sound-r8a7795", "renesas,rcar_sound-gen3"; + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x280>, /* SSI */ + <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; clocks = <&cpg CPG_MOD 1005>, @@ -2277,7 +2277,7 @@ dma-names = "rx", "tx"; }; ssiu40: ssiu-32 { - dmas = <&audma0 0x71>, <&audma1 0x72>; + dmas = <&audma0 0x71>, <&audma1 0x72>; dma-names = "rx", "tx"; }; ssiu41: ssiu-33 { @@ -2412,6 +2412,18 @@ }; }; + mlp: mlp@ec520000 { + compatible = "renesas,r8a7795-mlp", + "renesas,rcar-gen3-mlp"; + reg = <0 0xec520000 0 0x800>; + interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 802>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 802>; + status = "disabled"; + }; + audma0: dma-controller@ec700000 { compatible = "renesas,dmac-r8a7795", "renesas,rcar-dmac"; diff --git a/dts/src/arm64/renesas/r8a77960.dtsi b/dts/src/arm64/renesas/r8a77960.dtsi index 26f7103d11..6f79da8cc8 100644 --- a/dts/src/arm64/renesas/r8a77960.dtsi +++ b/dts/src/arm64/renesas/r8a77960.dtsi @@ -1890,12 +1890,12 @@ * clkout : #clock-cells = <0>; <&rcar_sound>; * clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>; */ - compatible = "renesas,rcar_sound-r8a7796", "renesas,rcar_sound-gen3"; - reg = <0 0xec500000 0 0x1000>, /* SCU */ - <0 0xec5a0000 0 0x100>, /* ADG */ - <0 0xec540000 0 0x1000>, /* SSIU */ - <0 0xec541000 0 0x280>, /* SSI */ - <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/ + compatible = "renesas,rcar_sound-r8a7796", "renesas,rcar_sound-gen3"; + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x280>, /* SSI */ + <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; clocks = <&cpg CPG_MOD 1005>, @@ -2202,7 +2202,7 @@ dma-names = "rx", "tx"; }; ssiu40: ssiu-32 { - dmas = <&audma0 0x71>, <&audma1 0x72>; + dmas = <&audma0 0x71>, <&audma1 0x72>; dma-names = "rx", "tx"; }; ssiu41: ssiu-33 { @@ -2284,6 +2284,18 @@ }; }; + mlp: mlp@ec520000 { + compatible = "renesas,r8a7796-mlp", + "renesas,rcar-gen3-mlp"; + reg = <0 0xec520000 0 0x800>; + interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 802>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 802>; + status = "disabled"; + }; + audma0: dma-controller@ec700000 { compatible = "renesas,dmac-r8a7796", "renesas,rcar-dmac"; diff --git a/dts/src/arm64/renesas/r8a77961.dtsi b/dts/src/arm64/renesas/r8a77961.dtsi index ac9b587f6f..68cbbb322a 100644 --- a/dts/src/arm64/renesas/r8a77961.dtsi +++ b/dts/src/arm64/renesas/r8a77961.dtsi @@ -1734,7 +1734,7 @@ * clkout : #clock-cells = <0>; <&rcar_sound>; * clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>; */ - compatible = "renesas,rcar_sound-r8a77961", "renesas,rcar_sound-gen3"; + compatible = "renesas,rcar_sound-r8a77961", "renesas,rcar_sound-gen3"; reg = <0 0xec500000 0 0x1000>, /* SCU */ <0 0xec5a0000 0 0x100>, /* ADG */ <0 0xec540000 0 0x1000>, /* SSIU */ @@ -2046,7 +2046,7 @@ dma-names = "rx", "tx"; }; ssiu40: ssiu-32 { - dmas = <&audma0 0x71>, <&audma1 0x72>; + dmas = <&audma0 0x71>, <&audma1 0x72>; dma-names = "rx", "tx"; }; ssiu41: ssiu-33 { @@ -2128,6 +2128,18 @@ }; }; + mlp: mlp@ec520000 { + compatible = "renesas,r8a77961-mlp", + "renesas,rcar-gen3-mlp"; + reg = <0 0xec520000 0 0x800>; + interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 802>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 802>; + status = "disabled"; + }; + audma0: dma-controller@ec700000 { compatible = "renesas,dmac-r8a77961", "renesas,rcar-dmac"; @@ -2722,6 +2734,33 @@ port@2 { reg = <2>; du_out_lvds0: endpoint { + remote-endpoint = <&lvds0_in>; + }; + }; + }; + }; + + lvds0: lvds@feb90000 { + compatible = "renesas,r8a77961-lvds"; + reg = <0 0xfeb90000 0 0x14>; + clocks = <&cpg CPG_MOD 727>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 727>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds0_in: endpoint { + remote-endpoint = <&du_out_lvds0>; + }; + }; + port@1 { + reg = <1>; + lvds0_out: endpoint { }; }; }; diff --git a/dts/src/arm64/renesas/r8a77965.dtsi b/dts/src/arm64/renesas/r8a77965.dtsi index f898aad72b..9f858af8b7 100644 --- a/dts/src/arm64/renesas/r8a77965.dtsi +++ b/dts/src/arm64/renesas/r8a77965.dtsi @@ -1753,12 +1753,12 @@ * clkout : #clock-cells = <0>; <&rcar_sound>; * clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>; */ - compatible = "renesas,rcar_sound-r8a77965", "renesas,rcar_sound-gen3"; - reg = <0 0xec500000 0 0x1000>, /* SCU */ - <0 0xec5a0000 0 0x100>, /* ADG */ - <0 0xec540000 0 0x1000>, /* SSIU */ - <0 0xec541000 0 0x280>, /* SSI */ - <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/ + compatible = "renesas,rcar_sound-r8a77965", "renesas,rcar_sound-gen3"; + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x280>, /* SSI */ + <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; clocks = <&cpg CPG_MOD 1005>, @@ -2012,7 +2012,7 @@ dma-names = "rx", "tx"; }; ssiu40: ssiu-32 { - dmas = <&audma0 0x71>, <&audma1 0x72>; + dmas = <&audma0 0x71>, <&audma1 0x72>; dma-names = "rx", "tx"; }; ssiu41: ssiu-33 { @@ -2147,6 +2147,18 @@ }; }; + mlp: mlp@ec520000 { + compatible = "renesas,r8a77965-mlp", + "renesas,rcar-gen3-mlp"; + reg = <0 0xec520000 0 0x800>; + interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 802>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 802>; + status = "disabled"; + }; + audma0: dma-controller@ec700000 { compatible = "renesas,dmac-r8a77965", "renesas,rcar-dmac"; diff --git a/dts/src/arm64/renesas/r8a77970-eagle.dts b/dts/src/arm64/renesas/r8a77970-eagle.dts index b579d3189a..49d1a929ae 100644 --- a/dts/src/arm64/renesas/r8a77970-eagle.dts +++ b/dts/src/arm64/renesas/r8a77970-eagle.dts @@ -113,6 +113,20 @@ }; }; +&csi40 { + status = "okay"; + + ports { + port@0 { + csi40_in: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&max9286_out0>; + }; + }; + }; +}; + &du { clocks = <&cpg CPG_MOD 724>, <&x1_clk>; clock-names = "du.0", "dclkin.0"; @@ -172,6 +186,89 @@ }; }; +&i2c3 { + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + gmsl0: gmsl-deserializer@48 { + compatible = "maxim,max9286"; + reg = <0x48>; + + maxim,gpio-poc = <0 GPIO_ACTIVE_LOW>; + enable-gpios = <&io_expander 0 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + }; + + port@2 { + reg = <2>; + }; + + port@3 { + reg = <3>; + }; + + port@4 { + reg = <4>; + max9286_out0: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&csi40_in>; + }; + }; + }; + + i2c-mux { + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + status = "disabled"; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + status = "disabled"; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + status = "disabled"; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + status = "disabled"; + }; + }; + }; +}; + &lvds0 { status = "okay"; @@ -200,6 +297,11 @@ function = "i2c0"; }; + i2c3_pins: i2c3 { + groups = "i2c3_a"; + function = "i2c3"; + }; + qspi0_pins: qspi0 { groups = "qspi0_ctrl", "qspi0_data4"; function = "qspi0"; diff --git a/dts/src/arm64/renesas/r8a77980-condor.dts b/dts/src/arm64/renesas/r8a77980-condor.dts index 3d6d10c82f..43ed033eb5 100644 --- a/dts/src/arm64/renesas/r8a77980-condor.dts +++ b/dts/src/arm64/renesas/r8a77980-condor.dts @@ -108,6 +108,34 @@ }; }; +&csi40 { + status = "okay"; + + ports { + port@0 { + csi40_in: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&max9286_out0>; + }; + }; + }; +}; + +&csi41 { + status = "okay"; + + ports { + port@0 { + csi41_in: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&max9286_out1>; + }; + }; + }; +}; + &du { clocks = <&cpg CPG_MOD 724>, <&x1_clk>; @@ -200,6 +228,164 @@ }; }; +&i2c1 { + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + gmsl0: gmsl-deserializer@48 { + compatible = "maxim,max9286"; + reg = <0x48>; + + maxim,gpio-poc = <0 GPIO_ACTIVE_LOW>; + enable-gpios = <&io_expander0 0 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + }; + + port@2 { + reg = <2>; + }; + + port@3 { + reg = <3>; + }; + + port@4 { + reg = <4>; + max9286_out0: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&csi40_in>; + }; + }; + }; + + i2c-mux { + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + status = "disabled"; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + status = "disabled"; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + status = "disabled"; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + status = "disabled"; + }; + }; + }; + + gmsl1: gmsl-deserializer@4a { + compatible = "maxim,max9286"; + reg = <0x4a>; + + maxim,gpio-poc = <0 GPIO_ACTIVE_LOW>; + enable-gpios = <&io_expander1 0 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + }; + + port@2 { + reg = <2>; + }; + + port@3 { + reg = <3>; + }; + + port@4 { + reg = <4>; + max9286_out1: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&csi41_in>; + }; + }; + }; + + i2c-mux { + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + status = "disabled"; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + status = "disabled"; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + status = "disabled"; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + status = "disabled"; + }; + }; + }; +}; + &lvds0 { status = "okay"; @@ -256,6 +442,11 @@ function = "i2c0"; }; + i2c1_pins: i2c1 { + groups = "i2c1"; + function = "i2c1"; + }; + mmc_pins: mmc { groups = "mmc_data8", "mmc_ctrl", "mmc_ds"; function = "mmc"; diff --git a/dts/src/arm64/renesas/r8a77990.dtsi b/dts/src/arm64/renesas/r8a77990.dtsi index 14caedd0c9..7e0f1aab21 100644 --- a/dts/src/arm64/renesas/r8a77990.dtsi +++ b/dts/src/arm64/renesas/r8a77990.dtsi @@ -1489,12 +1489,12 @@ * clkout : #clock-cells = <0>; <&rcar_sound>; * clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>; */ - compatible = "renesas,rcar_sound-r8a77990", "renesas,rcar_sound-gen3"; - reg = <0 0xec500000 0 0x1000>, /* SCU */ - <0 0xec5a0000 0 0x100>, /* ADG */ - <0 0xec540000 0 0x1000>, /* SSIU */ - <0 0xec541000 0 0x280>, /* SSI */ - <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/ + compatible = "renesas,rcar_sound-r8a77990", "renesas,rcar_sound-gen3"; + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x280>, /* SSI */ + <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; clocks = <&cpg CPG_MOD 1005>, @@ -1682,6 +1682,18 @@ }; }; + mlp: mlp@ec520000 { + compatible = "renesas,r8a77990-mlp", + "renesas,rcar-gen3-mlp"; + reg = <0 0xec520000 0 0x800>; + interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 802>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 802>; + status = "disabled"; + }; + audma0: dma-controller@ec700000 { compatible = "renesas,dmac-r8a77990", "renesas,rcar-dmac"; diff --git a/dts/src/arm64/renesas/r8a77995.dtsi b/dts/src/arm64/renesas/r8a77995.dtsi index f29f3982a4..cac1f9467f 100644 --- a/dts/src/arm64/renesas/r8a77995.dtsi +++ b/dts/src/arm64/renesas/r8a77995.dtsi @@ -1046,12 +1046,12 @@ * clkout : #clock-cells = <0>; <&rcar_sound>; * clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>; */ - compatible = "renesas,rcar_sound-r8a77995", "renesas,rcar_sound-gen3"; - reg = <0 0xec500000 0 0x1000>, /* SCU */ - <0 0xec5a0000 0 0x100>, /* ADG */ - <0 0xec540000 0 0x1000>, /* SSIU */ - <0 0xec541000 0 0x280>, /* SSI */ - <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ + compatible = "renesas,rcar_sound-r8a77995", "renesas,rcar_sound-gen3"; + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x280>, /* SSI */ + <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; clocks = <&cpg CPG_MOD 1005>, @@ -1132,6 +1132,18 @@ }; }; + mlp: mlp@ec520000 { + compatible = "renesas,r8a77995-mlp", + "renesas,rcar-gen3-mlp"; + reg = <0 0xec520000 0 0x800>; + interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 802>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 802>; + status = "disabled"; + }; + audma0: dma-controller@ec700000 { compatible = "renesas,dmac-r8a77995", "renesas,rcar-dmac"; diff --git a/dts/src/arm64/renesas/r8a779a0-falcon-csi-dsi.dtsi b/dts/src/arm64/renesas/r8a779a0-falcon-csi-dsi.dtsi index f791c76f1b..e06b8eda85 100644 --- a/dts/src/arm64/renesas/r8a779a0-falcon-csi-dsi.dtsi +++ b/dts/src/arm64/renesas/r8a779a0-falcon-csi-dsi.dtsi @@ -5,6 +5,63 @@ * Copyright (C) 2021 Glider bv */ +&csi40 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + csi40_in: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&max96712_out0>; + }; + }; + }; +}; + +&csi42 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + csi42_in: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&max96712_out1>; + }; + }; + }; +}; + +&csi43 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + csi43_in: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&max96712_out2>; + }; + }; + }; +}; + &i2c0 { pca9654_a: gpio@21 { compatible = "onnn,pca9654"; @@ -34,3 +91,175 @@ pagesize = <8>; }; }; + +&i2c1 { + gmsl0: gmsl-deserializer@49 { + compatible = "maxim,max96712"; + reg = <0x49>; + enable-gpios = <&pca9654_a 0 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@4 { + reg = <4>; + max96712_out0: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&csi40_in>; + }; + }; + }; + }; + + gmsl1: gmsl-deserializer@4b { + compatible = "maxim,max96712"; + reg = <0x4b>; + enable-gpios = <&pca9654_b 0 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@4 { + reg = <4>; + max96712_out1: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + lane-polarities = <0 0 0 0 1>; + remote-endpoint = <&csi42_in>; + }; + }; + }; + }; + + gmsl2: gmsl-deserializer@6b { + compatible = "maxim,max96712"; + reg = <0x6b>; + enable-gpios = <&pca9654_c 0 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@4 { + reg = <4>; + max96712_out2: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + lane-polarities = <0 0 0 0 1>; + remote-endpoint = <&csi43_in>; + }; + }; + }; + }; +}; + +&isp0 { + status = "okay"; +}; + +&isp2 { + status = "okay"; +}; + +&isp3 { + status = "okay"; +}; + +&vin00 { + status = "okay"; +}; + +&vin01 { + status = "okay"; +}; + +&vin02 { + status = "okay"; +}; + +&vin03 { + status = "okay"; +}; + +&vin04 { + status = "okay"; +}; + +&vin05 { + status = "okay"; +}; + +&vin06 { + status = "okay"; +}; + +&vin07 { + status = "okay"; +}; + +&vin16 { + status = "okay"; +}; + +&vin17 { + status = "okay"; +}; + +&vin18 { + status = "okay"; +}; + +&vin19 { + status = "okay"; +}; + +&vin20 { + status = "okay"; +}; + +&vin21 { + status = "okay"; +}; + +&vin22 { + status = "okay"; +}; + +&vin23 { + status = "okay"; +}; + +&vin24 { + status = "okay"; +}; + +&vin25 { + status = "okay"; +}; + +&vin26 { + status = "okay"; +}; + +&vin27 { + status = "okay"; +}; + +&vin28 { + status = "okay"; +}; + +&vin29 { + status = "okay"; +}; + +&vin30 { + status = "okay"; +}; + +&vin31 { + status = "okay"; +}; diff --git a/dts/src/arm64/renesas/r8a779a0.dtsi b/dts/src/arm64/renesas/r8a779a0.dtsi index 1e7ed12ebc..c4be288b19 100644 --- a/dts/src/arm64/renesas/r8a779a0.dtsi +++ b/dts/src/arm64/renesas/r8a779a0.dtsi @@ -102,7 +102,7 @@ interrupts = <GIC_SPI 832 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 916>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; - resets = <&cpg 916>; + resets = <&cpg 916>; gpio-controller; #gpio-cells = <2>; gpio-ranges = <&pfc 0 0 28>; @@ -116,7 +116,7 @@ interrupts = <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 915>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; - resets = <&cpg 915>; + resets = <&cpg 915>; gpio-controller; #gpio-cells = <2>; gpio-ranges = <&pfc 0 32 31>; @@ -130,7 +130,7 @@ interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 915>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; - resets = <&cpg 915>; + resets = <&cpg 915>; gpio-controller; #gpio-cells = <2>; gpio-ranges = <&pfc 0 64 25>; @@ -144,7 +144,7 @@ interrupts = <GIC_SPI 844 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 916>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; - resets = <&cpg 916>; + resets = <&cpg 916>; gpio-controller; #gpio-cells = <2>; gpio-ranges = <&pfc 0 96 17>; @@ -158,7 +158,7 @@ interrupts = <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 917>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; - resets = <&cpg 917>; + resets = <&cpg 917>; gpio-controller; #gpio-cells = <2>; gpio-ranges = <&pfc 0 128 27>; @@ -172,7 +172,7 @@ interrupts = <GIC_SPI 852 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 917>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; - resets = <&cpg 917>; + resets = <&cpg 917>; gpio-controller; #gpio-cells = <2>; gpio-ranges = <&pfc 0 160 21>; @@ -186,7 +186,7 @@ interrupts = <GIC_SPI 856 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 918>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; - resets = <&cpg 918>; + resets = <&cpg 918>; gpio-controller; #gpio-cells = <2>; gpio-ranges = <&pfc 0 192 21>; @@ -200,7 +200,7 @@ interrupts = <GIC_SPI 860 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 918>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; - resets = <&cpg 918>; + resets = <&cpg 918>; gpio-controller; #gpio-cells = <2>; gpio-ranges = <&pfc 0 224 21>; @@ -214,7 +214,7 @@ interrupts = <GIC_SPI 864 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 918>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; - resets = <&cpg 918>; + resets = <&cpg 918>; gpio-controller; #gpio-cells = <2>; gpio-ranges = <&pfc 0 256 21>; @@ -228,7 +228,7 @@ interrupts = <GIC_SPI 868 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 918>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; - resets = <&cpg 918>; + resets = <&cpg 918>; gpio-controller; #gpio-cells = <2>; gpio-ranges = <&pfc 0 288 21>; @@ -340,6 +340,21 @@ #thermal-sensor-cells = <1>; }; + intc_ex: interrupt-controller@e61c0000 { + compatible = "renesas,intc-ex-r8a779a0", "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_CORE R8A779A0_CLK_CP>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + }; + tmu0: timer@e61e0000 { compatible = "renesas,tmu-r8a779a0", "renesas,tmu"; reg = <0 0xe61e0000 0 0x30>; diff --git a/dts/src/arm64/renesas/r8a779f0-spider-cpu.dtsi b/dts/src/arm64/renesas/r8a779f0-spider-cpu.dtsi index 156586532c..6e07c54148 100644 --- a/dts/src/arm64/renesas/r8a779f0-spider-cpu.dtsi +++ b/dts/src/arm64/renesas/r8a779f0-spider-cpu.dtsi @@ -31,6 +31,34 @@ clock-frequency = <32768>; }; +&pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + + scif3_pins: scif3 { + groups = "scif3_data", "scif3_ctrl"; + function = "scif3"; + }; + + scif_clk_pins: scif_clk { + groups = "scif_clk"; + function = "scif_clk"; + }; +}; + +&rwdt { + timeout-sec = <60>; + status = "okay"; +}; + &scif3 { + pinctrl-0 = <&scif3_pins>; + pinctrl-names = "default"; + + uart-has-rtscts; status = "okay"; }; + +&scif_clk { + clock-frequency = <24000000>; +}; diff --git a/dts/src/arm64/renesas/r8a779f0.dtsi b/dts/src/arm64/renesas/r8a779f0.dtsi index eda597766e..f4e5498673 100644 --- a/dts/src/arm64/renesas/r8a779f0.dtsi +++ b/dts/src/arm64/renesas/r8a779f0.dtsi @@ -59,6 +59,22 @@ #size-cells = <2>; ranges; + rwdt: watchdog@e6020000 { + compatible = "renesas,r8a779f0-wdt", + "renesas,rcar-gen4-wdt"; + reg = <0 0xe6020000 0 0x0c>; + clocks = <&cpg CPG_MOD 907>; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 907>; + status = "disabled"; + }; + + pfc: pinctrl@e6050000 { + compatible = "renesas,pfc-r8a779f0"; + reg = <0 0xe6050000 0 0x16c>, <0 0xe6050800 0 0x16c>, + <0 0xe6051000 0 0x16c>, <0 0xe6051800 0 0x16c>; + }; + cpg: clock-controller@e6150000 { compatible = "renesas,r8a779f0-cpg-mssr"; reg = <0 0xe6150000 0 0x4000>; @@ -94,6 +110,76 @@ status = "disabled"; }; + dmac0: dma-controller@e7350000 { + compatible = "renesas,dmac-r8a779f0", + "renesas,rcar-gen4-dmac"; + reg = <0 0xe7350000 0 0x1000>, + <0 0xe7300000 0 0x10000>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", "ch4", + "ch5", "ch6", "ch7", "ch8", "ch9", + "ch10", "ch11", "ch12", "ch13", + "ch14", "ch15"; + clocks = <&cpg CPG_MOD 709>; + clock-names = "fck"; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 709>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + dmac1: dma-controller@e7351000 { + compatible = "renesas,dmac-r8a779f0", + "renesas,rcar-gen4-dmac"; + reg = <0 0xe7351000 0 0x1000>, + <0 0xe7310000 0 0x10000>; + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", "ch4", + "ch5", "ch6", "ch7", "ch8", "ch9", + "ch10", "ch11", "ch12", "ch13", + "ch14", "ch15"; + clocks = <&cpg CPG_MOD 710>; + clock-names = "fck"; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 710>; + #dma-cells = <1>; + dma-channels = <16>; + }; + gic: interrupt-controller@f1000000 { compatible = "arm,gic-v3"; #interrupt-cells = <3>; diff --git a/dts/src/arm64/renesas/r9a07g044c1.dtsi b/dts/src/arm64/renesas/r9a07g044c1.dtsi new file mode 100644 index 0000000000..1d57df7069 --- /dev/null +++ b/dts/src/arm64/renesas/r9a07g044c1.dtsi @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/G2LC R9A07G044C1 SoC specific parts + * + * Copyright (C) 2021 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r9a07g044.dtsi" + +/ { + compatible = "renesas,r9a07g044c1", "renesas,r9a07g044"; + + cpus { + /delete-node/ cpu-map; + /delete-node/ cpu@100; + }; + + timer { + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; + +&soc { + /delete-node/ ssi@1004a800; + /delete-node/ serial@1004c800; + /delete-node/ adc@10059000; + /delete-node/ ethernet@11c30000; +}; diff --git a/dts/src/arm64/renesas/r9a07g044c2-smarc.dts b/dts/src/arm64/renesas/r9a07g044c2-smarc.dts new file mode 100644 index 0000000000..5a5cea82a5 --- /dev/null +++ b/dts/src/arm64/renesas/r9a07g044c2-smarc.dts @@ -0,0 +1,91 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/G2LC SMARC EVK board + * + * Copyright (C) 2021 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r9a07g044c2.dtsi" +#include "rzg2lc-smarc.dtsi" + +/ { + model = "Renesas SMARC EVK based on r9a07g044c2"; + compatible = "renesas,smarc-evk", "renesas,r9a07g044c2", "renesas,r9a07g044"; +}; + +&ehci0 { + /delete-property/ pinctrl-0; + /delete-property/ pinctrl-names; + status = "disabled"; +}; + +&ehci1 { + /delete-property/ pinctrl-0; + /delete-property/ pinctrl-names; + status = "disabled"; +}; + +&hsusb { + /delete-property/ pinctrl-0; + /delete-property/ pinctrl-names; + status = "disabled"; +}; + +&i2c0 { + /delete-property/ pinctrl-0; + /delete-property/ pinctrl-names; + status = "disabled"; +}; + +&i2c1 { + /delete-property/ pinctrl-0; + /delete-property/ pinctrl-names; + status = "disabled"; +}; + +&i2c3 { + /delete-property/ pinctrl-0; + /delete-property/ pinctrl-names; + status = "disabled"; +}; + +&ohci0 { + /delete-property/ pinctrl-0; + /delete-property/ pinctrl-names; + status = "disabled"; +}; + +&ohci1 { + /delete-property/ pinctrl-0; + /delete-property/ pinctrl-names; + status = "disabled"; +}; + +&phyrst { + status = "disabled"; +}; + +&spi1 { + /delete-property/ pinctrl-0; + /delete-property/ pinctrl-names; + status = "disabled"; +}; + +&ssi0 { + /delete-property/ pinctrl-0; + /delete-property/ pinctrl-names; + status = "disabled"; +}; + +&usb2_phy0 { + /delete-property/ pinctrl-0; + /delete-property/ pinctrl-names; + status = "disabled"; +}; + +&usb2_phy1 { + /delete-property/ pinctrl-0; + /delete-property/ pinctrl-names; + status = "disabled"; +}; diff --git a/dts/src/arm64/renesas/r9a07g044c2.dtsi b/dts/src/arm64/renesas/r9a07g044c2.dtsi new file mode 100644 index 0000000000..7bb8917fe4 --- /dev/null +++ b/dts/src/arm64/renesas/r9a07g044c2.dtsi @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/G2LC R9A07G044C2 SoC specific parts + * + * Copyright (C) 2021 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r9a07g044.dtsi" + +/ { + compatible = "renesas,r9a07g044c2", "renesas,r9a07g044"; +}; + +&soc { + /delete-node/ ssi@1004a800; + /delete-node/ serial@1004c800; + /delete-node/ adc@10059000; + /delete-node/ ethernet@11c30000; +}; diff --git a/dts/src/arm64/renesas/r9a07g044l2-smarc.dts b/dts/src/arm64/renesas/r9a07g044l2-smarc.dts index 247b0b3f1b..bc2af6c92c 100644 --- a/dts/src/arm64/renesas/r9a07g044l2-smarc.dts +++ b/dts/src/arm64/renesas/r9a07g044l2-smarc.dts @@ -8,6 +8,8 @@ /dts-v1/; #include "r9a07g044l2.dtsi" #include "rzg2l-smarc-som.dtsi" +#include "rzg2l-smarc-pinfunction.dtsi" +#include "rz-smarc-common.dtsi" #include "rzg2l-smarc.dtsi" / { diff --git a/dts/src/arm64/renesas/r9a07g054.dtsi b/dts/src/arm64/renesas/r9a07g054.dtsi new file mode 100644 index 0000000000..5d39e765c2 --- /dev/null +++ b/dts/src/arm64/renesas/r9a07g054.dtsi @@ -0,0 +1,491 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/V2L SoC + * + * Copyright (C) 2021 Renesas Electronics Corp. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/r9a07g054-cpg.h> + +/ { + compatible = "renesas,r9a07g054"; + #address-cells = <2>; + #size-cells = <2>; + + audio_clk1: audio_clk1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by boards that provide it */ + clock-frequency = <0>; + }; + + audio_clk2: audio_clk2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by boards that provide it */ + clock-frequency = <0>; + }; + + /* External CAN clock - to be overridden by boards that provide it */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + /* clock can be either from exclk or crystal oscillator (XIN/XOUT) */ + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + }; + }; + + cpu0: cpu@0 { + compatible = "arm,cortex-a55"; + reg = <0>; + device_type = "cpu"; + #cooling-cells = <2>; + next-level-cache = <&L3_CA55>; + enable-method = "psci"; + clocks = <&cpg CPG_CORE R9A07G054_CLK_I>; + }; + + cpu1: cpu@100 { + compatible = "arm,cortex-a55"; + reg = <0x100>; + device_type = "cpu"; + next-level-cache = <&L3_CA55>; + enable-method = "psci"; + clocks = <&cpg CPG_CORE R9A07G054_CLK_I>; + }; + + L3_CA55: cache-controller-0 { + compatible = "cache"; + cache-unified; + cache-size = <0x40000>; + }; + }; + + psci { + compatible = "arm,psci-1.0", "arm,psci-0.2"; + method = "smc"; + }; + + soc: soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ssi0: ssi@10049c00 { + reg = <0 0x10049c00 0 0x400>; + #sound-dai-cells = <0>; + /* place holder */ + }; + + spi1: spi@1004b000 { + reg = <0 0x1004b000 0 0x400>; + #address-cells = <1>; + #size-cells = <0>; + /* place holder */ + }; + + scif0: serial@1004b800 { + compatible = "renesas,scif-r9a07g054", + "renesas,scif-r9a07g044"; + reg = <0 0x1004b800 0 0x400>; + interrupts = <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "eri", "rxi", "txi", + "bri", "dri", "tei"; + clocks = <&cpg CPG_MOD R9A07G054_SCIF0_CLK_PCK>; + clock-names = "fck"; + power-domains = <&cpg>; + resets = <&cpg R9A07G054_SCIF0_RST_SYSTEM_N>; + status = "disabled"; + }; + + scif1: serial@1004bc00 { + compatible = "renesas,scif-r9a07g054", + "renesas,scif-r9a07g044"; + reg = <0 0x1004bc00 0 0x400>; + interrupts = <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 388 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "eri", "rxi", "txi", + "bri", "dri", "tei"; + clocks = <&cpg CPG_MOD R9A07G054_SCIF1_CLK_PCK>; + clock-names = "fck"; + power-domains = <&cpg>; + resets = <&cpg R9A07G054_SCIF1_RST_SYSTEM_N>; + status = "disabled"; + }; + + scif2: serial@1004c000 { + compatible = "renesas,scif-r9a07g054", + "renesas,scif-r9a07g044"; + reg = <0 0x1004c000 0 0x400>; + interrupts = <GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "eri", "rxi", "txi", + "bri", "dri", "tei"; + clocks = <&cpg CPG_MOD R9A07G054_SCIF2_CLK_PCK>; + clock-names = "fck"; + power-domains = <&cpg>; + resets = <&cpg R9A07G054_SCIF2_RST_SYSTEM_N>; + status = "disabled"; + }; + + scif3: serial@1004c400 { + compatible = "renesas,scif-r9a07g054", + "renesas,scif-r9a07g044"; + reg = <0 0x1004c400 0 0x400>; + interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "eri", "rxi", "txi", + "bri", "dri", "tei"; + clocks = <&cpg CPG_MOD R9A07G054_SCIF3_CLK_PCK>; + clock-names = "fck"; + power-domains = <&cpg>; + resets = <&cpg R9A07G054_SCIF3_RST_SYSTEM_N>; + status = "disabled"; + }; + + scif4: serial@1004c800 { + compatible = "renesas,scif-r9a07g054", + "renesas,scif-r9a07g044"; + reg = <0 0x1004c800 0 0x400>; + interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "eri", "rxi", "txi", + "bri", "dri", "tei"; + clocks = <&cpg CPG_MOD R9A07G054_SCIF4_CLK_PCK>; + clock-names = "fck"; + power-domains = <&cpg>; + resets = <&cpg R9A07G054_SCIF4_RST_SYSTEM_N>; + status = "disabled"; + }; + + sci0: serial@1004d000 { + compatible = "renesas,r9a07g054-sci", "renesas,sci"; + reg = <0 0x1004d000 0 0x400>; + interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "eri", "rxi", "txi", "tei"; + clocks = <&cpg CPG_MOD R9A07G054_SCI0_CLKP>; + clock-names = "fck"; + power-domains = <&cpg>; + resets = <&cpg R9A07G054_SCI0_RST>; + status = "disabled"; + }; + + sci1: serial@1004d400 { + compatible = "renesas,r9a07g054-sci", "renesas,sci"; + reg = <0 0x1004d400 0 0x400>; + interrupts = <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "eri", "rxi", "txi", "tei"; + clocks = <&cpg CPG_MOD R9A07G054_SCI1_CLKP>; + clock-names = "fck"; + power-domains = <&cpg>; + resets = <&cpg R9A07G054_SCI1_RST>; + status = "disabled"; + }; + + canfd: can@10050000 { + reg = <0 0x10050000 0 0x8000>; + /* place holder */ + }; + + i2c0: i2c@10058000 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x10058000 0 0x400>; + /* place holder */ + }; + + i2c1: i2c@10058400 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x10058400 0 0x400>; + /* place holder */ + }; + + i2c3: i2c@10058c00 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x10058c00 0 0x400>; + /* place holder */ + }; + + adc: adc@10059000 { + reg = <0 0x10059000 0 0x400>; + /* place holder */ + }; + + sbc: spi@10060000 { + reg = <0 0x10060000 0 0x10000>, + <0 0x20000000 0 0x10000000>, + <0 0x10070000 0 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + /* place holder */ + }; + + cpg: clock-controller@11010000 { + compatible = "renesas,r9a07g054-cpg"; + reg = <0 0x11010000 0 0x10000>; + clocks = <&extal_clk>; + clock-names = "extal"; + #clock-cells = <2>; + #reset-cells = <1>; + #power-domain-cells = <0>; + }; + + sysc: system-controller@11020000 { + compatible = "renesas,r9a07g054-sysc"; + reg = <0 0x11020000 0 0x10000>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "lpm_int", "ca55stbydone_int", + "cm33stbyr_int", "ca55_deny"; + status = "disabled"; + }; + + pinctrl: pinctrl@11030000 { + compatible = "renesas,r9a07g054-pinctrl", + "renesas,r9a07g044-pinctrl"; + reg = <0 0x11030000 0 0x10000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 0 392>; + clocks = <&cpg CPG_MOD R9A07G054_GPIO_HCLK>; + power-domains = <&cpg>; + resets = <&cpg R9A07G054_GPIO_RSTN>, + <&cpg R9A07G054_GPIO_PORT_RESETN>, + <&cpg R9A07G054_GPIO_SPARE_RESETN>; + }; + + dmac: dma-controller@11820000 { + compatible = "renesas,r9a07g054-dmac", + "renesas,rz-dmac"; + reg = <0 0x11820000 0 0x10000>, + <0 0x11830000 0 0x10000>; + interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 125 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 126 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 127 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 131 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 132 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 133 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 134 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 135 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 136 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 137 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 138 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 139 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD R9A07G054_DMAC_ACLK>, + <&cpg CPG_MOD R9A07G054_DMAC_PCLK>; + power-domains = <&cpg>; + resets = <&cpg R9A07G054_DMAC_ARESETN>, + <&cpg R9A07G054_DMAC_RST_ASYNC>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + gpu: gpu@11840000 { + reg = <0x0 0x11840000 0x0 0x10000>; + /* place holder */ + }; + + gic: interrupt-controller@11900000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0x11900000 0 0x40000>, + <0x0 0x11940000 0 0x60000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>; + }; + + sdhi0: mmc@11c00000 { + reg = <0x0 0x11c00000 0 0x10000>; + /* place holder */ + }; + + sdhi1: mmc@11c10000 { + reg = <0x0 0x11c10000 0 0x10000>; + /* place holder */ + }; + + eth0: ethernet@11c20000 { + compatible = "renesas,r9a07g054-gbeth", + "renesas,rzg2l-gbeth"; + reg = <0 0x11c20000 0 0x10000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mux", "fil", "arp_ns"; + phy-mode = "rgmii"; + clocks = <&cpg CPG_MOD R9A07G054_ETH0_CLK_AXI>, + <&cpg CPG_MOD R9A07G054_ETH0_CLK_CHI>, + <&cpg CPG_CORE R9A07G054_CLK_HP>; + clock-names = "axi", "chi", "refclk"; + resets = <&cpg R9A07G054_ETH0_RST_HW_N>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + eth1: ethernet@11c30000 { + compatible = "renesas,r9a07g054-gbeth", + "renesas,rzg2l-gbeth"; + reg = <0 0x11c30000 0 0x10000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mux", "fil", "arp_ns"; + phy-mode = "rgmii"; + clocks = <&cpg CPG_MOD R9A07G054_ETH1_CLK_AXI>, + <&cpg CPG_MOD R9A07G054_ETH1_CLK_CHI>, + <&cpg CPG_CORE R9A07G054_CLK_HP>; + clock-names = "axi", "chi", "refclk"; + resets = <&cpg R9A07G054_ETH1_RST_HW_N>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + phyrst: usbphy-ctrl@11c40000 { + reg = <0 0x11c40000 0 0x10000>; + /* place holder */ + }; + + ohci0: usb@11c50000 { + reg = <0 0x11c50000 0 0x100>; + /* place holder */ + }; + + ohci1: usb@11c70000 { + reg = <0 0x11c70000 0 0x100>; + /* place holder */ + }; + + ehci0: usb@11c50100 { + reg = <0 0x11c50100 0 0x100>; + /* place holder */ + }; + + ehci1: usb@11c70100 { + reg = <0 0x11c70100 0 0x100>; + /* place holder */ + }; + + usb2_phy0: usb-phy@11c50200 { + reg = <0 0x11c50200 0 0x700>; + /* place holder */ + }; + + usb2_phy1: usb-phy@11c70200 { + reg = <0 0x11c70200 0 0x700>; + /* place holder */ + }; + + hsusb: usb@11c60000 { + reg = <0 0x11c60000 0 0x10000>; + /* place holder */ + }; + + wdt0: watchdog@12800800 { + reg = <0 0x12800800 0 0x400>; + /* place holder */ + }; + + wdt1: watchdog@12800c00 { + reg = <0 0x12800C00 0 0x400>; + /* place holder */ + }; + + wdt2: watchdog@12800400 { + reg = <0 0x12800400 0 0x400>; + /* place holder */ + }; + + ostm0: timer@12801000 { + reg = <0x0 0x12801000 0x0 0x400>; + /* place holder */ + }; + + ostm1: timer@12801400 { + reg = <0x0 0x12801400 0x0 0x400>; + /* place holder */ + }; + + ostm2: timer@12801800 { + reg = <0x0 0x12801800 0x0 0x400>; + /* place holder */ + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/dts/src/arm64/renesas/r9a07g054l1.dtsi b/dts/src/arm64/renesas/r9a07g054l1.dtsi new file mode 100644 index 0000000000..c448cc6634 --- /dev/null +++ b/dts/src/arm64/renesas/r9a07g054l1.dtsi @@ -0,0 +1,25 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/V2L R9A07G054L1 SoC specific parts + * + * Copyright (C) 2021 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r9a07g054.dtsi" + +/ { + compatible = "renesas,r9a07g054l1", "renesas,r9a07g054"; + + cpus { + /delete-node/ cpu-map; + /delete-node/ cpu@100; + }; + + timer { + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/dts/src/arm64/renesas/r9a07g054l2-smarc.dts b/dts/src/arm64/renesas/r9a07g054l2-smarc.dts new file mode 100644 index 0000000000..fc334b4c2a --- /dev/null +++ b/dts/src/arm64/renesas/r9a07g054l2-smarc.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/G2L SMARC EVK board + * + * Copyright (C) 2021 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r9a07g054l2.dtsi" +#include "rzg2l-smarc-som.dtsi" +#include "rzg2l-smarc-pinfunction.dtsi" +#include "rz-smarc-common.dtsi" +#include "rzg2l-smarc.dtsi" + +/ { + model = "Renesas SMARC EVK based on r9a07g054l2"; + compatible = "renesas,smarc-evk", "renesas,r9a07g054l2", "renesas,r9a07g054"; +}; + +&pinctrl { + /delete-node/ can0-stb-hog; + /delete-node/ can1-stb-hog; + /delete-node/ gpio-sd0-pwr-en-hog; + /delete-node/ sd0-dev-sel-hog; + /delete-node/ sd1-pwr-en-hog; +}; diff --git a/dts/src/arm64/renesas/r9a07g054l2.dtsi b/dts/src/arm64/renesas/r9a07g054l2.dtsi new file mode 100644 index 0000000000..4d5914bc95 --- /dev/null +++ b/dts/src/arm64/renesas/r9a07g054l2.dtsi @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/V2L R9A07G054L2 SoC specific parts + * + * Copyright (C) 2021 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r9a07g054.dtsi" + +/ { + compatible = "renesas,r9a07g054l2", "renesas,r9a07g054"; +}; diff --git a/dts/src/arm64/renesas/rz-smarc-common.dtsi b/dts/src/arm64/renesas/rz-smarc-common.dtsi new file mode 100644 index 0000000000..588117aafa --- /dev/null +++ b/dts/src/arm64/renesas/rz-smarc-common.dtsi @@ -0,0 +1,207 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/{G2L,G2LC,V2L} SMARC EVK common parts + * + * Copyright (C) 2022 Renesas Electronics Corp. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/rzg2l-pinctrl.h> + +/* + * SSI-WM8978 + * + * This command is required when Playback/Capture + * + * amixer cset name='Left Input Mixer L2 Switch' on + * amixer cset name='Right Input Mixer R2 Switch' on + * amixer cset name='Headphone Playback Volume' 100 + * amixer cset name='PCM Volume' 100% + * amixer cset name='Input PGA Volume' 25 + * + */ + +/ { + aliases { + serial0 = &scif0; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c3 = &i2c3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + audio_mclock: audio_mclock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <11289600>; + }; + + snd_rzg2l: sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&cpu_dai>; + simple-audio-card,frame-master = <&cpu_dai>; + simple-audio-card,mclk-fs = <256>; + + simple-audio-card,widgets = "Microphone", "Microphone Jack"; + simple-audio-card,routing = + "L2", "Mic Bias", + "R2", "Mic Bias", + "Mic Bias", "Microphone Jack"; + + cpu_dai: simple-audio-card,cpu { + sound-dai = <&ssi0>; + }; + + codec_dai: simple-audio-card,codec { + clocks = <&audio_mclock>; + sound-dai = <&wm8978>; + }; + }; + + usb0_vbus_otg: regulator-usb0-vbus-otg { + compatible = "regulator-fixed"; + + regulator-name = "USB0_VBUS_OTG"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vccq_sdhi1: regulator-vccq-sdhi1 { + compatible = "regulator-gpio"; + regulator-name = "SDHI1 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios = <&pinctrl RZG2L_GPIO(39, 1) GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1>, <1800000 0>; + }; +}; + +&audio_clk1{ + clock-frequency = <11289600>; +}; + +&audio_clk2{ + clock-frequency = <12288000>; +}; + +&canfd { + pinctrl-0 = <&can0_pins &can1_pins>; + pinctrl-names = "default"; + status = "okay"; + + channel0 { + status = "okay"; + }; + + channel1 { + status = "okay"; + }; +}; + +&ehci0 { + dr_mode = "otg"; + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&hsusb { + dr_mode = "otg"; + status = "okay"; +}; + +&i2c0 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&i2c1 { + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&i2c3 { + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; + clock-frequency = <400000>; + + status = "okay"; + + wm8978: codec@1a { + compatible = "wlf,wm8978"; + #sound-dai-cells = <0>; + reg = <0x1a>; + }; +}; + +&ohci0 { + dr_mode = "otg"; + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&phyrst { + status = "okay"; +}; + +&scif0 { + pinctrl-0 = <&scif0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhi1 { + pinctrl-0 = <&sdhi1_pins>; + pinctrl-1 = <&sdhi1_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <&vccq_sdhi1>; + bus-width = <4>; + sd-uhs-sdr50; + sd-uhs-sdr104; + status = "okay"; +}; + +&spi1 { + pinctrl-0 = <&spi1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&ssi0 { + pinctrl-0 = <&ssi0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&usb2_phy0 { + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; + + vbus-supply = <&usb0_vbus_otg>; + status = "okay"; +}; + +&usb2_phy1 { + pinctrl-0 = <&usb1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/dts/src/arm64/renesas/rzg2l-smarc-pinfunction.dtsi b/dts/src/arm64/renesas/rzg2l-smarc-pinfunction.dtsi new file mode 100644 index 0000000000..9085d8c76c --- /dev/null +++ b/dts/src/arm64/renesas/rzg2l-smarc-pinfunction.dtsi @@ -0,0 +1,137 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/{G2L,V2L} SMARC pincontrol parts + * + * Copyright (C) 2021 Renesas Electronics Corp. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/rzg2l-pinctrl.h> + +&pinctrl { + pinctrl-0 = <&sound_clk_pins>; + pinctrl-names = "default"; + + can0_pins: can0 { + pinmux = <RZG2L_PORT_PINMUX(10, 1, 2)>, /* TX */ + <RZG2L_PORT_PINMUX(11, 0, 2)>; /* RX */ + }; + + /* SW7 should be at position 2->3 so that GPIO8_CAN0_STB line is activated */ + can0-stb-hog { + gpio-hog; + gpios = <RZG2L_GPIO(42, 2) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "can0_stb"; + }; + + can1_pins: can1 { + pinmux = <RZG2L_PORT_PINMUX(12, 1, 2)>, /* TX */ + <RZG2L_PORT_PINMUX(13, 0, 2)>; /* RX */ + }; + + /* SW8 should be at position 2->3 so that GPIO9_CAN1_STB line is activated */ + can1-stb-hog { + gpio-hog; + gpios = <RZG2L_GPIO(42, 3) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "can1_stb"; + }; + + i2c0_pins: i2c0 { + pins = "RIIC0_SDA", "RIIC0_SCL"; + input-enable; + }; + + i2c1_pins: i2c1 { + pins = "RIIC1_SDA", "RIIC1_SCL"; + input-enable; + }; + + i2c3_pins: i2c3 { + pinmux = <RZG2L_PORT_PINMUX(18, 0, 3)>, /* SDA */ + <RZG2L_PORT_PINMUX(18, 1, 3)>; /* SCL */ + }; + + scif0_pins: scif0 { + pinmux = <RZG2L_PORT_PINMUX(38, 0, 1)>, /* TxD */ + <RZG2L_PORT_PINMUX(38, 1, 1)>; /* RxD */ + }; + + scif2_pins: scif2 { + pinmux = <RZG2L_PORT_PINMUX(48, 0, 1)>, /* TxD */ + <RZG2L_PORT_PINMUX(48, 1, 1)>, /* RxD */ + <RZG2L_PORT_PINMUX(48, 3, 1)>, /* CTS# */ + <RZG2L_PORT_PINMUX(48, 4, 1)>; /* RTS# */ + }; + + sd1-pwr-en-hog { + gpio-hog; + gpios = <RZG2L_GPIO(39, 2) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "sd1_pwr_en"; + }; + + sdhi1_pins: sd1 { + sd1_data { + pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3"; + power-source = <3300>; + }; + + sd1_ctrl { + pins = "SD1_CLK", "SD1_CMD"; + power-source = <3300>; + }; + + sd1_mux { + pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>; /* SD1_CD */ + }; + }; + + sdhi1_pins_uhs: sd1_uhs { + sd1_data_uhs { + pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3"; + power-source = <1800>; + }; + + sd1_ctrl_uhs { + pins = "SD1_CLK", "SD1_CMD"; + power-source = <1800>; + }; + + sd1_mux_uhs { + pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>; /* SD1_CD */ + }; + }; + + sound_clk_pins: sound_clk { + pins = "AUDIO_CLK1", "AUDIO_CLK2"; + input-enable; + }; + + spi1_pins: spi1 { + pinmux = <RZG2L_PORT_PINMUX(44, 0, 1)>, /* CK */ + <RZG2L_PORT_PINMUX(44, 1, 1)>, /* MOSI */ + <RZG2L_PORT_PINMUX(44, 2, 1)>, /* MISO */ + <RZG2L_PORT_PINMUX(44, 3, 1)>; /* SSL */ + }; + + ssi0_pins: ssi0 { + pinmux = <RZG2L_PORT_PINMUX(45, 0, 1)>, /* BCK */ + <RZG2L_PORT_PINMUX(45, 1, 1)>, /* RCK */ + <RZG2L_PORT_PINMUX(45, 2, 1)>, /* TXD */ + <RZG2L_PORT_PINMUX(45, 3, 1)>; /* RXD */ + }; + + usb0_pins: usb0 { + pinmux = <RZG2L_PORT_PINMUX(4, 0, 1)>, /* VBUS */ + <RZG2L_PORT_PINMUX(5, 0, 1)>, /* OVC */ + <RZG2L_PORT_PINMUX(5, 1, 1)>; /* OTG_ID */ + }; + + usb1_pins: usb1 { + pinmux = <RZG2L_PORT_PINMUX(42, 0, 1)>, /* VBUS */ + <RZG2L_PORT_PINMUX(42, 1, 1)>; /* OVC */ + }; +}; + diff --git a/dts/src/arm64/renesas/rzg2l-smarc-som.dtsi b/dts/src/arm64/renesas/rzg2l-smarc-som.dtsi index 9112e79079..aeacd22e9e 100644 --- a/dts/src/arm64/renesas/rzg2l-smarc-som.dtsi +++ b/dts/src/arm64/renesas/rzg2l-smarc-som.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) /* - * Device Tree Source for the RZ/G2L SMARC SOM common parts + * Device Tree Source for the RZ/{G2L,V2L} SMARC SOM common parts * * Copyright (C) 2021 Renesas Electronics Corp. */ diff --git a/dts/src/arm64/renesas/rzg2l-smarc.dtsi b/dts/src/arm64/renesas/rzg2l-smarc.dtsi index 6f2a8bdfa2..33ddfd18bd 100644 --- a/dts/src/arm64/renesas/rzg2l-smarc.dtsi +++ b/dts/src/arm64/renesas/rzg2l-smarc.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) /* - * Device Tree Source for the RZ/G2L SMARC EVK common parts + * Device Tree Source for the RZ/{G2L,V2L} SMARC EVK common parts * * Copyright (C) 2021 Renesas Electronics Corp. */ @@ -8,293 +8,15 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/rzg2l-pinctrl.h> -/* - * SSI-WM8978 - * - * This command is required when Playback/Capture - * - * amixer cset name='Left Input Mixer L2 Switch' on - * amixer cset name='Right Input Mixer R2 Switch' on - * amixer cset name='Headphone Playback Volume' 100 - * amixer cset name='PCM Volume' 100% - * amixer cset name='Input PGA Volume' 25 - * - */ - /* comment the #define statement to disable SCIF2 (SER0) on PMOD1 (CN7) */ #define PMOD1_SER0 1 / { aliases { - serial0 = &scif0; serial1 = &scif2; - i2c0 = &i2c0; - i2c1 = &i2c1; - i2c3 = &i2c3; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - audio_mclock: audio_mclock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <11289600>; - }; - - snd_rzg2l: sound { - compatible = "simple-audio-card"; - simple-audio-card,format = "i2s"; - simple-audio-card,bitclock-master = <&cpu_dai>; - simple-audio-card,frame-master = <&cpu_dai>; - simple-audio-card,mclk-fs = <256>; - - simple-audio-card,widgets = "Microphone", "Microphone Jack"; - simple-audio-card,routing = - "L2", "Mic Bias", - "R2", "Mic Bias", - "Mic Bias", "Microphone Jack"; - - cpu_dai: simple-audio-card,cpu { - sound-dai = <&ssi0>; - }; - - codec_dai: simple-audio-card,codec { - clocks = <&audio_mclock>; - sound-dai = <&wm8978>; - }; - }; - - usb0_vbus_otg: regulator-usb0-vbus-otg { - compatible = "regulator-fixed"; - - regulator-name = "USB0_VBUS_OTG"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - vccq_sdhi1: regulator-vccq-sdhi1 { - compatible = "regulator-gpio"; - regulator-name = "SDHI1 VccQ"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - gpios = <&pinctrl RZG2L_GPIO(39, 1) GPIO_ACTIVE_HIGH>; - gpios-states = <1>; - states = <3300000 1>, <1800000 0>; - }; -}; - -&audio_clk1{ - clock-frequency = <11289600>; -}; - -&audio_clk2{ - clock-frequency = <12288000>; -}; - -&canfd { - pinctrl-0 = <&can0_pins &can1_pins>; - pinctrl-names = "default"; - status = "okay"; - - channel0 { - status = "okay"; - }; - - channel1 { - status = "okay"; - }; -}; - -&ehci0 { - dr_mode = "otg"; - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - -&hsusb { - dr_mode = "otg"; - status = "okay"; -}; - -&i2c0 { - pinctrl-0 = <&i2c0_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&i2c1 { - pinctrl-0 = <&i2c1_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&i2c3 { - pinctrl-0 = <&i2c3_pins>; - pinctrl-names = "default"; - clock-frequency = <400000>; - - status = "okay"; - - wm8978: codec@1a { - compatible = "wlf,wm8978"; - #sound-dai-cells = <0>; - reg = <0x1a>; - }; -}; - -&ohci0 { - dr_mode = "otg"; - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - -&phyrst { - status = "okay"; -}; - -&pinctrl { - pinctrl-0 = <&sound_clk_pins>; - pinctrl-names = "default"; - - can0_pins: can0 { - pinmux = <RZG2L_PORT_PINMUX(10, 1, 2)>, /* TX */ - <RZG2L_PORT_PINMUX(11, 0, 2)>; /* RX */ - }; - - /* SW7 should be at position 2->3 so that GPIO8_CAN0_STB line is activated */ - can0-stb { - gpio-hog; - gpios = <RZG2L_GPIO(42, 2) GPIO_ACTIVE_HIGH>; - output-low; - line-name = "can0_stb"; - }; - - can1_pins: can1 { - pinmux = <RZG2L_PORT_PINMUX(12, 1, 2)>, /* TX */ - <RZG2L_PORT_PINMUX(13, 0, 2)>; /* RX */ - }; - - /* SW8 should be at position 2->3 so that GPIO9_CAN1_STB line is activated */ - can1-stb { - gpio-hog; - gpios = <RZG2L_GPIO(42, 3) GPIO_ACTIVE_HIGH>; - output-low; - line-name = "can1_stb"; - }; - - i2c0_pins: i2c0 { - pins = "RIIC0_SDA", "RIIC0_SCL"; - input-enable; - }; - - i2c1_pins: i2c1 { - pins = "RIIC1_SDA", "RIIC1_SCL"; - input-enable; - }; - - i2c3_pins: i2c3 { - pinmux = <RZG2L_PORT_PINMUX(18, 0, 3)>, /* SDA */ - <RZG2L_PORT_PINMUX(18, 1, 3)>; /* SCL */ - }; - - scif0_pins: scif0 { - pinmux = <RZG2L_PORT_PINMUX(38, 0, 1)>, /* TxD */ - <RZG2L_PORT_PINMUX(38, 1, 1)>; /* RxD */ - }; - - scif2_pins: scif2 { - pinmux = <RZG2L_PORT_PINMUX(48, 0, 1)>, /* TxD */ - <RZG2L_PORT_PINMUX(48, 1, 1)>, /* RxD */ - <RZG2L_PORT_PINMUX(48, 3, 1)>, /* CTS# */ - <RZG2L_PORT_PINMUX(48, 4, 1)>; /* RTS# */ - }; - - sd1-pwr-en-hog { - gpio-hog; - gpios = <RZG2L_GPIO(39, 2) GPIO_ACTIVE_HIGH>; - output-high; - line-name = "sd1_pwr_en"; - }; - - sdhi1_pins: sd1 { - sd1_data { - pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3"; - power-source = <3300>; - }; - - sd1_ctrl { - pins = "SD1_CLK", "SD1_CMD"; - power-source = <3300>; - }; - - sd1_mux { - pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>; /* SD1_CD */ - }; - }; - - sdhi1_pins_uhs: sd1_uhs { - sd1_data_uhs { - pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3"; - power-source = <1800>; - }; - - sd1_ctrl_uhs { - pins = "SD1_CLK", "SD1_CMD"; - power-source = <1800>; - }; - - sd1_mux_uhs { - pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>; /* SD1_CD */ - }; - }; - - sound_clk_pins: sound_clk { - pins = "AUDIO_CLK1", "AUDIO_CLK2"; - input-enable; - }; - - spi1_pins: spi1 { - pinmux = <RZG2L_PORT_PINMUX(44, 0, 1)>, /* CK */ - <RZG2L_PORT_PINMUX(44, 1, 1)>, /* MOSI */ - <RZG2L_PORT_PINMUX(44, 2, 1)>, /* MISO */ - <RZG2L_PORT_PINMUX(44, 3, 1)>; /* SSL */ - }; - - ssi0_pins: ssi0 { - pinmux = <RZG2L_PORT_PINMUX(45, 0, 1)>, /* BCK */ - <RZG2L_PORT_PINMUX(45, 1, 1)>, /* RCK */ - <RZG2L_PORT_PINMUX(45, 2, 1)>, /* TXD */ - <RZG2L_PORT_PINMUX(45, 3, 1)>; /* RXD */ - }; - - usb0_pins: usb0 { - pinmux = <RZG2L_PORT_PINMUX(4, 0, 1)>, /* VBUS */ - <RZG2L_PORT_PINMUX(5, 0, 1)>, /* OVC */ - <RZG2L_PORT_PINMUX(5, 1, 1)>; /* OTG_ID */ - }; - - usb1_pins: usb1 { - pinmux = <RZG2L_PORT_PINMUX(42, 0, 1)>, /* VBUS */ - <RZG2L_PORT_PINMUX(42, 1, 1)>; /* OVC */ }; }; -&scif0 { - pinctrl-0 = <&scif0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - /* * To enable SCIF2 (SER0) on PMOD1 (CN7) * SW1 should be at position 2->3 so that SER0_CTS# line is activated @@ -311,45 +33,3 @@ status = "okay"; }; #endif - -&sdhi1 { - pinctrl-0 = <&sdhi1_pins>; - pinctrl-1 = <&sdhi1_pins_uhs>; - pinctrl-names = "default", "state_uhs"; - - vmmc-supply = <®_3p3v>; - vqmmc-supply = <&vccq_sdhi1>; - bus-width = <4>; - sd-uhs-sdr50; - sd-uhs-sdr104; - status = "okay"; -}; - -&spi1 { - pinctrl-0 = <&spi1_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&ssi0 { - pinctrl-0 = <&ssi0_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&usb2_phy0 { - pinctrl-0 = <&usb0_pins>; - pinctrl-names = "default"; - - vbus-supply = <&usb0_vbus_otg>; - status = "okay"; -}; - -&usb2_phy1 { - pinctrl-0 = <&usb1_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; diff --git a/dts/src/arm64/renesas/rzg2lc-smarc-pinfunction.dtsi b/dts/src/arm64/renesas/rzg2lc-smarc-pinfunction.dtsi new file mode 100644 index 0000000000..37ff209158 --- /dev/null +++ b/dts/src/arm64/renesas/rzg2lc-smarc-pinfunction.dtsi @@ -0,0 +1,94 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/G2LC SMARC pincontrol parts + * + * Copyright (C) 2021 Renesas Electronics Corp. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/rzg2l-pinctrl.h> + +&pinctrl { + pinctrl-0 = <&sound_clk_pins>; + pinctrl-names = "default"; + + scif0_pins: scif0 { + pinmux = <RZG2L_PORT_PINMUX(38, 0, 1)>, /* TxD */ + <RZG2L_PORT_PINMUX(38, 1, 1)>; /* RxD */ + }; + +#if SW_SCIF_CAN + /* SW8 should be at position 2->1 */ + can1_pins: can1 { + pinmux = <RZG2L_PORT_PINMUX(40, 0, 3)>, /* TxD */ + <RZG2L_PORT_PINMUX(40, 1, 3)>; /* RxD */ + }; +#endif + + scif1_pins: scif1 { + pinmux = <RZG2L_PORT_PINMUX(40, 0, 1)>, /* TxD */ + <RZG2L_PORT_PINMUX(40, 1, 1)>, /* RxD */ + <RZG2L_PORT_PINMUX(41, 0, 1)>, /* CTS# */ + <RZG2L_PORT_PINMUX(41, 1, 1)>; /* RTS# */ + }; + +#if SW_RSPI_CAN + /* SW8 should be at position 2->3 so that GPIO9_CAN1_STB line is activated */ + can1-stb-hog { + gpio-hog; + gpios = <RZG2L_GPIO(44, 3) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "can1_stb"; + }; + + can1_pins: can1 { + pinmux = <RZG2L_PORT_PINMUX(44, 0, 3)>, /* TxD */ + <RZG2L_PORT_PINMUX(44, 1, 3)>; /* RxD */ + }; +#endif + + sd1-pwr-en-hog { + gpio-hog; + gpios = <RZG2L_GPIO(39, 2) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "sd1_pwr_en"; + }; + + sdhi1_pins: sd1 { + sd1_data { + pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3"; + power-source = <3300>; + }; + + sd1_ctrl { + pins = "SD1_CLK", "SD1_CMD"; + power-source = <3300>; + }; + + sd1_mux { + pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>; /* SD1_CD */ + }; + }; + + sdhi1_pins_uhs: sd1_uhs { + sd1_data_uhs { + pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3"; + power-source = <1800>; + }; + + sd1_ctrl_uhs { + pins = "SD1_CLK", "SD1_CMD"; + power-source = <1800>; + }; + + sd1_mux_uhs { + pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>; /* SD1_CD */ + }; + }; + + sound_clk_pins: sound_clk { + pins = "AUDIO_CLK1", "AUDIO_CLK2"; + input-enable; + }; +}; + diff --git a/dts/src/arm64/renesas/rzg2lc-smarc-som.dtsi b/dts/src/arm64/renesas/rzg2lc-smarc-som.dtsi new file mode 100644 index 0000000000..88a7938017 --- /dev/null +++ b/dts/src/arm64/renesas/rzg2lc-smarc-som.dtsi @@ -0,0 +1,222 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/G2LC SMARC SOM common parts + * + * Copyright (C) 2021 Renesas Electronics Corp. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/rzg2l-pinctrl.h> + +/ { + aliases { + ethernet0 = ð0; + }; + + chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; + }; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x38000000>; + }; + + reg_1p8v: regulator0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vccq_sdhi0: regulator-vccq-sdhi0 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + states = <3300000 1>, <1800000 0>; + regulator-boot-on; + gpios = <&pinctrl RZG2L_GPIO(39, 0) GPIO_ACTIVE_HIGH>; + regulator-always-on; + }; +}; + +ð0 { + pinctrl-0 = <ð0_pins>; + pinctrl-names = "default"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + status = "okay"; + + phy0: ethernet-phy@7 { + compatible = "ethernet-phy-id0022.1640", + "ethernet-phy-ieee802.3-c22"; + reg = <7>; + rxc-skew-psec = <2400>; + txc-skew-psec = <2400>; + rxdv-skew-psec = <0>; + txdv-skew-psec = <0>; + rxd0-skew-psec = <0>; + rxd1-skew-psec = <0>; + rxd2-skew-psec = <0>; + rxd3-skew-psec = <0>; + txd0-skew-psec = <0>; + txd1-skew-psec = <0>; + txd2-skew-psec = <0>; + txd3-skew-psec = <0>; + }; +}; + +&extal_clk { + clock-frequency = <24000000>; +}; + +&pinctrl { + eth0_pins: eth0 { + pinmux = <RZG2L_PORT_PINMUX(28, 1, 1)>, /* ET0_LINKSTA */ + <RZG2L_PORT_PINMUX(27, 1, 1)>, /* ET0_MDC */ + <RZG2L_PORT_PINMUX(28, 0, 1)>, /* ET0_MDIO */ + <RZG2L_PORT_PINMUX(20, 0, 1)>, /* ET0_TXC */ + <RZG2L_PORT_PINMUX(20, 1, 1)>, /* ET0_TX_CTL */ + <RZG2L_PORT_PINMUX(20, 2, 1)>, /* ET0_TXD0 */ + <RZG2L_PORT_PINMUX(21, 0, 1)>, /* ET0_TXD1 */ + <RZG2L_PORT_PINMUX(21, 1, 1)>, /* ET0_TXD2 */ + <RZG2L_PORT_PINMUX(22, 0, 1)>, /* ET0_TXD3 */ + <RZG2L_PORT_PINMUX(24, 0, 1)>, /* ET0_RXC */ + <RZG2L_PORT_PINMUX(24, 1, 1)>, /* ET0_RX_CTL */ + <RZG2L_PORT_PINMUX(25, 0, 1)>, /* ET0_RXD0 */ + <RZG2L_PORT_PINMUX(25, 1, 1)>, /* ET0_RXD1 */ + <RZG2L_PORT_PINMUX(26, 0, 1)>, /* ET0_RXD2 */ + <RZG2L_PORT_PINMUX(26, 1, 1)>; /* ET0_RXD3 */ + }; + + gpio-sd0-pwr-en-hog { + gpio-hog; + gpios = <RZG2L_GPIO(18, 1) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "gpio_sd0_pwr_en"; + }; + + /* + * SD0 device selection is XOR between GPIO_SD0_DEV_SEL and SW1[2] + * The below switch logic can be used to select the device between + * eMMC and microSD, after setting GPIO_SD0_DEV_SEL to high in DT. + * SW1[2] should be at OFF position to enable 64 GB eMMC + * SW1[2] should be at position ON to enable uSD card CN3 + */ + gpio-sd0-dev-sel-hog { + gpio-hog; + gpios = <RZG2L_GPIO(40, 2) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "gpio_sd0_dev_sel"; + }; + + sdhi0_emmc_pins: sd0emmc { + sd0_emmc_data { + pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3", + "SD0_DATA4", "SD0_DATA5", "SD0_DATA6", "SD0_DATA7"; + power-source = <1800>; + }; + + sd0_emmc_ctrl { + pins = "SD0_CLK", "SD0_CMD"; + power-source = <1800>; + }; + + sd0_emmc_rst { + pins = "SD0_RST#"; + power-source = <1800>; + }; + }; + + sdhi0_pins: sd0 { + sd0_data { + pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3"; + power-source = <3300>; + }; + + sd0_ctrl { + pins = "SD0_CLK", "SD0_CMD"; + power-source = <3300>; + }; + + sd0_mux { + pinmux = <RZG2L_PORT_PINMUX(18, 0, 1)>; /* SD0_CD */ + }; + }; + + sdhi0_pins_uhs: sd0_uhs { + sd0_data_uhs { + pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3"; + power-source = <1800>; + }; + + sd0_ctrl_uhs { + pins = "SD0_CLK", "SD0_CMD"; + power-source = <1800>; + }; + + sd0_mux_uhs { + pinmux = <RZG2L_PORT_PINMUX(18, 0, 1)>; /* SD0_CD */ + }; + }; +}; + +#if (!SW_SD0_DEV_SEL) +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-1 = <&sdhi0_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <&vccq_sdhi0>; + bus-width = <4>; + sd-uhs-sdr50; + sd-uhs-sdr104; + status = "okay"; +}; +#endif + +#if SW_SD0_DEV_SEL +&sdhi0 { + pinctrl-0 = <&sdhi0_emmc_pins>; + pinctrl-1 = <&sdhi0_emmc_pins>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + bus-width = <8>; + mmc-hs200-1_8v; + non-removable; + fixed-emmc-driver-type = <1>; + status = "okay"; +}; +#endif + +&wdt0 { + status = "okay"; + timeout-sec = <60>; +}; + +&wdt1 { + status = "okay"; + timeout-sec = <60>; +}; + +&wdt2 { + status = "okay"; + timeout-sec = <60>; +}; diff --git a/dts/src/arm64/renesas/rzg2lc-smarc.dtsi b/dts/src/arm64/renesas/rzg2lc-smarc.dtsi new file mode 100644 index 0000000000..df7631fe5f --- /dev/null +++ b/dts/src/arm64/renesas/rzg2lc-smarc.dtsi @@ -0,0 +1,77 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/G2LC SMARC EVK parts + * + * Copyright (C) 2022 Renesas Electronics Corp. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/rzg2l-pinctrl.h> + +/* + * DIP-Switch SW1 setting on SoM + * 1 : High; 0: Low + * SW1-2 : SW_SD0_DEV_SEL (1: eMMC; 0: uSD) + * SW1-3 : SW_SCIF_CAN (1: CAN1; 0: SCIF1) + * SW1-4 : SW_RSPI_CAN (1: CAN1; 0: RSPI1) + * SW1-5 : SW_I2S0_I2S1 (1: I2S2 (HDMI audio); 0: I2S0) + * Please change below macros according to SW1 setting + */ + +#define SW_SD0_DEV_SEL 1 + +#define SW_SCIF_CAN 0 +#if (SW_SCIF_CAN) +/* Due to HW routing, SW_RSPI_CAN is always 0 when SW_SCIF_CAN is set to 1 */ +#define SW_RSPI_CAN 0 +#else +/* Please set SW_RSPI_CAN. Default value is 1 */ +#define SW_RSPI_CAN 1 +#endif + +#if (SW_SCIF_CAN & SW_RSPI_CAN) +#error "Can not set 1 to both SW_SCIF_CAN and SW_RSPI_CAN due to HW routing" +#endif + +#include "rzg2lc-smarc-som.dtsi" +#include "rzg2lc-smarc-pinfunction.dtsi" +#include "rz-smarc-common.dtsi" + +/* comment the #define statement to disable SCIF1 (SER0) on PMOD1 (CN7) */ +#define PMOD1_SER0 1 + +/ { + aliases { + serial1 = &scif1; + }; +}; + +#if (SW_SCIF_CAN || SW_RSPI_CAN) +&canfd { + pinctrl-0 = <&can1_pins>; + /delete-node/ channel@0; +}; +#else +&canfd { + /delete-property/ pinctrl-0; + /delete-property/ pinctrl-names; + status = "disabled"; +}; +#endif + +/* + * To enable SCIF1 (SER0) on PMOD1 (CN7), On connector board + * SW1 should be at position 2->3 so that SER0_CTS# line is activated + * SW2 should be at position 2->3 so that SER0_TX line is activated + * SW3 should be at position 2->3 so that SER0_RX line is activated + * SW4 should be at position 2->3 so that SER0_RTS# line is activated + */ +#if (!SW_SCIF_CAN && PMOD1_SER0) +&scif1 { + pinctrl-0 = <&scif1_pins>; + pinctrl-names = "default"; + + uart-has-rtscts; + status = "okay"; +}; +#endif diff --git a/dts/src/arm64/renesas/ulcb-kf.dtsi b/dts/src/arm64/renesas/ulcb-kf.dtsi index 61bd4df09d..ae532cd217 100644 --- a/dts/src/arm64/renesas/ulcb-kf.dtsi +++ b/dts/src/arm64/renesas/ulcb-kf.dtsi @@ -26,6 +26,38 @@ select-gpios = <&gpio_exp_75 13 GPIO_ACTIVE_HIGH>; }; + hdmi1-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi1_con: endpoint { + remote-endpoint = <&adv7513_out>; + }; + }; + }; + + accel_3v3: regulator-acc-3v3 { + compatible = "regulator-fixed"; + regulator-name = "accel-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + hdmi_1v8: regulator-hdmi-1v8 { + compatible = "regulator-fixed"; + regulator-name = "hdmi-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + hdmi_3v3: regulator-hdmi-3v3 { + compatible = "regulator-fixed"; + regulator-name = "hdmi-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + snd_3p3v: regulator-snd_3p3v { compatible = "regulator-fixed"; regulator-name = "snd-3.3v"; @@ -65,6 +97,10 @@ status = "okay"; }; +&du_out_rgb { + remote-endpoint = <&adv7513_in>; +}; + &ehci0 { dr_mode = "otg"; status = "okay"; @@ -91,12 +127,72 @@ reg = <0x71>; reset-gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; + /* HDMIoSDA, HDMIoSCL */ + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + + hdmi@3d { + compatible = "adi,adv7513"; + reg = <0x3d>; + + pinctrl-0 = <&hdmi1_pins>; + pinctrl-names = "default"; + + interrupt-parent = <&gpio2>; + interrupts = <14 IRQ_TYPE_LEVEL_LOW>; + + clocks = <&cs2000>; + clock-names = "cec"; + + pd-gpios = <&gpio_exp_75 5 GPIO_ACTIVE_LOW>; + + avdd-supply = <&hdmi_1v8>; + dvdd-supply = <&hdmi_1v8>; + pvdd-supply = <&hdmi_1v8>; + dvdd-3v-supply = <&hdmi_3v3>; + bgvdd-supply = <&hdmi_1v8>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7513_in: endpoint { + remote-endpoint = <&du_out_rgb>; + }; + }; + + port@1 { + reg = <1>; + adv7513_out: endpoint { + remote-endpoint = <&hdmi1_con>; + }; + }; + }; + }; + }; + /* Audio_SDA, Audio_SCL */ i2c@7 { #address-cells = <1>; #size-cells = <0>; reg = <7>; + accelerometer@1d { + compatible = "st,lsm9ds0-imu"; + reg = <0x1d>; + + vdd-supply = <&accel_3v3>; + vddio-supply = <&accel_3v3>; + }; + pcm3168a: audio-codec@44 { #sound-dai-cells = <0>; compatible = "ti,pcm3168a"; @@ -131,6 +227,14 @@ }; }; }; + + gyroscope@6b { + compatible = "st,lsm9ds0-gyro"; + reg = <0x6b>; + + vdd-supply = <&accel_3v3>; + vddio-supply = <&accel_3v3>; + }; }; }; @@ -264,6 +368,19 @@ function = "can1"; }; + hdmi1_pins: hdmi1 { + adv7513-interrupt { + pins = "GP_2_14"; + bias-pull-up; + }; + + du { + groups = "du_rgb888", "du_sync", "du_clk_out_0", + "du_disp"; + function = "du"; + }; + }; + hscif0_pins: hscif0 { groups = "hscif0_data", "hscif0_ctrl"; function = "hscif0"; @@ -297,17 +414,14 @@ &sound_pcm_pins>; ports { - /* rsnd_port0/1 are on salvator-common */ + /* rsnd_port0/1 are defined in ulcb.dtsi */ rsnd_port2: port@2 { reg = <2>; rsnd_for_pcm3168a_play: endpoint { remote-endpoint = <&pcm3168a_endpoint_p>; - - dai-format = "i2s"; - bitclock-master = <&rsnd_for_pcm3168a_play>; - frame-master = <&rsnd_for_pcm3168a_play>; + bitclock-master; + frame-master; dai-tdm-slot-num = <8>; - playback = <&ssi3>; }; }; @@ -315,12 +429,9 @@ reg = <3>; rsnd_for_pcm3168a_capture: endpoint { remote-endpoint = <&pcm3168a_endpoint_c>; - - dai-format = "i2s"; - bitclock-master = <&rsnd_for_pcm3168a_capture>; - frame-master = <&rsnd_for_pcm3168a_capture>; + bitclock-master; + frame-master; dai-tdm-slot-num = <6>; - capture = <&ssi4>; }; }; @@ -360,10 +471,10 @@ }; &sound_card { - dais = <&rsnd_port0 /* ak4613 */ - &rsnd_port1 /* HDMI0 */ - &rsnd_port2 /* pcm3168a playback */ - &rsnd_port3 /* pcm3168a capture */ + links = <&rsnd_port0 /* ak4613 */ + &rsnd_port1 /* HDMI0 */ + &rsnd_port2 /* pcm3168a playback */ + &rsnd_port3 /* pcm3168a capture */ >; }; diff --git a/dts/src/arm64/renesas/ulcb.dtsi b/dts/src/arm64/renesas/ulcb.dtsi index a7e93df4ce..b4bdb2d7e4 100644 --- a/dts/src/arm64/renesas/ulcb.dtsi +++ b/dts/src/arm64/renesas/ulcb.dtsi @@ -95,11 +95,11 @@ }; sound_card: sound { - compatible = "audio-graph-card"; + compatible = "audio-graph-card2"; label = "rcar-sound"; - dais = <&rsnd_port0 /* ak4613 */ - &rsnd_port1 /* HDMI0 */ + links = <&rsnd_port0 /* ak4613 */ + &rsnd_port1 /* HDMI0 */ >; }; @@ -408,11 +408,8 @@ reg = <0>; rsnd_for_ak4613: endpoint { remote-endpoint = <&ak4613_endpoint>; - - dai-format = "left_j"; - bitclock-master = <&rsnd_for_ak4613>; - frame-master = <&rsnd_for_ak4613>; - + bitclock-master; + frame-master; playback = <&ssi0>, <&src0>, <&dvc0>; capture = <&ssi1>, <&src1>, <&dvc1>; }; @@ -421,11 +418,8 @@ reg = <1>; rsnd_for_hdmi: endpoint { remote-endpoint = <&dw_hdmi0_snd_in>; - - dai-format = "i2s"; - bitclock-master = <&rsnd_for_hdmi>; - frame-master = <&rsnd_for_hdmi>; - + bitclock-master; + frame-master; playback = <&ssi2>; }; }; |