| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
| |
In order to boot from eMMC on the STM32MP15x, the boot_ack bit in the
ext_csd register must be set. Document this and while at it, fix a
misformatted code block in the same section.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Bastian Krause <bst@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
| |
Adjust filename and path of nfsroot.txt according to Linux commit
f9a9349 ("Documentation: nfsroot.txt: convert to ReST")
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
| |
Signed-off-by: Du Huanpeng <u74147@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ |
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Board consists of SoM with stm32mp157c with 4G eMMC and 512M DDR3 RAM.
Carrier board features USB and ETH interfaces and SD card connector.
USB and ETH interfaces not yet operational.
Boot from eMMC requires boot ack bit set.
Device Tree taken from v5 of kernel device tree off mailing list[1].
[1]: https://lore.kernel.org/linux-arm-kernel/20200724145107.35772-3-marcin.sloniewski@gmail.com/
Tested-by: Jookia <contact@jookia.org>
Tested-by: Xogium <contact@xogium.me>
Signed-off-by: Ahmad Fatoum <ahmad@a3f.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|/
|
|
|
|
|
| |
Remove unneeded colon.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ |
|
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Since 7e5a875fff7d ("Compile libfdt for barebox"), we now also have
libfdt for operating on flattened device trees out of the PBL.
Document this.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ \ |
|
| |/
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Oleksij and Kevin's Useless Devices.
O&KUD Max9331
AR9331 400MHz MIPS
64M DRAM
16M SPI Flash
4G USB Nand Flash
3 User LEDs
3 Ports(1Wan/2Lan)
1 TTL Debug Uart
Signed-off-by: Du Huanpeng <u74147@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ \ |
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
This adds support for the NXP i.MX8MP-EVK board.
The SDRAM timings are taken from U-Boot-2020.07-rc4, other information
how to initialize the board are form U-Boot as well.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |/
| |
| |
| |
| |
| |
| |
| |
| | |
This renames the dcdofs config option in the imx-image tool to ivtofs. dcdofs
is a misnomer. The DCD (Device Configuration Data) is only one part of the data
linked into the IVT (Image Vector Table), but the meaning of the option is
really the latter, not the former.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|/
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Sync with the upstream device tree repository has been a common cause
for breakage in barebox. Often unnoticed:
* New bindings are merged upstream and device trees migrated, but
barebox didn't yet have support
* Nodes are renamed upstream, but barebox still extends the old name,
with duplicate nodes resulting
We can solve the second one by requiring dtc to give us errors when
paths we extend no longer exist. Document how to do so.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
|
|
|
| |
While some support is still missing (USB, LCD), we already have some
prerequisites in place like USB PHY and PWM (for backlight). We also have
gained one new board and some other new drivers since the last time the
defconfig was touched, so enable them all, as well as some possibly useful
commands.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
| |
Add documentation on kvx architecture and kalray k200 board.
Signed-off-by: Clement Leger <cleger@kalray.eu>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ |
|
| |
| |
| |
| | |
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |
| |
| |
| |
| |
| |
| |
| | |
The devicetree-overlay key is part of the official Boot Loader
Specification. There is no need to document it in Barebox, again.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
There is a big warning on the linked page that the page is obsolete and
a link to the current version of the Boot Loader Specification. The
Barebox documentation shall directly link to the current version of the
specification.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|/
|
|
|
|
|
|
|
| |
For eMMC, the boot partitions are used for FSBL instead of having
these two partitions in the user area, like with SD-Cards.
Document this.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ |
|
| |
| |
| |
| |
| |
| |
| | |
Some rudimentary documentation how to load OP-TEE.
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ \ |
|
| |/
| |
| |
| |
| | |
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|/
|
|
|
|
|
|
|
|
| |
- Fix prefix
- attemps --> attempts
- add missing equal sign
- Add 2 examples
Signed-off-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
| |
Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
| |
Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ |
|
| |
| |
| |
| |
| |
| |
| |
| | |
The STM32MP Evaluation Kits place a LED on PA13 to display boot status.
Document its blinking patterns.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Some distributions might not have python in /usr/bin, but in $PATH.
Using #!/usr/bin/env python solves this, and is consistent with how the
other perl and python shebangs look like in the tree.
Signed-off-by: Florian Klink <flokli@flokli.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|/
|
|
|
|
|
|
|
|
| |
Some distributions might not have bash in /bin, but in $PATH.
Using #!/usr/bin/env bash solves this, and is consistent with how the
perl and python shebangs look like in the tree.
Signed-off-by: Florian Klink <flokli@flokli.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ |
|
| |
| |
| |
| |
| | |
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |
| |
| |
| |
| | |
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The UEFI specification paragraph quoted above notes:
> The watchdog timer is only used during boot services. On successful
> completion of ExitBootServices() the watchdog timer is disabled.
Thus disabling the watchdog is _the_ only proper behavior. Adjust the
wording accordingly.
Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |
| |
| |
| |
| |
| |
| |
| | |
The evaluation kits have 2P DIP-Switches for boot mode selection.
Document them.
Signed-off-by: Ahmad Fatoum <ahmad@a3f.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|/
|
|
|
|
|
|
| |
With SD/MMC controller and Ethernet MAC support merged, we now have
usable STM32MP support. Remove the text that suggested otherwise.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ |
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Read the devicetree-overlay property from the blspec entry and register
the overlays when booting the blspec entry.
Do not fail the boot if an overlay cannot be loaded, because if Linux
fails to boot without an overlay, the base device tree is broken.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ \ |
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
We have barebox get its environment out of a "barebox-environment"
partition. The BootROM and first stage bootloader both select partitions
on name not UUID, so we're following suit.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
On some machines the python command is provided by Python 3 while on
most (at least in my bubble) it is still Python 2. Modify the code to
make it usable by both Python versions.
print_function is available in __future__ since Python 2.6.0a2, which
shouldn't be a relevant restriction.
The modified script generates the same documentation as the old one;
independent if the script is called using Python 2 (here: 2.7.16) or
Python 3 (here: 3.7.3).
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|\ \ \ |
|
| | |/
| |/|
| | |
| | |
| | |
| | |
| | |
| | | |
Some peripherals are still missing, but the main functionality to boot
an OS is already in place. Document how to use it.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ \ \ |
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Document the image and load structure for i.MX6 and i.MX8MQ.
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
| |/ /
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
This board is produced by Embest/Element 14 and is based on i.MX6 Dual.
For more informations on this board :
http://www.embest-tech.com/shop/star/marsboard.html
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Tested-by: Stefan Lengfeld <contact@stefanchrist.eu>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|\ \ \ |
|
| |/ /
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The way barebox handles the Linux device trees and the device tree
compiler source included in the source tree may not be obvious
to new developers. Add a basic high-level documentation.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|