summaryrefslogtreecommitdiffstats
path: root/arch/mips/boards
Commit message (Collapse)AuthorAgeFilesLines
* MIPS: dts: rename tplink-mr3020.dts -> ar9331_tl_mr3020.dtsAntony Pavlov2020-01-141-1/+1
| | | | | | | | Linux MIPS uses <soc-name>_<board-name>.dts board dts-file naming scheme so use it in barebox too. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: relocation: pass ram size to pbl_main_entryOleksij Rempel2019-04-2310-10/+20
| | | | | | | | To make barebox dynamically relocatable it should know the RAM size to be able to calculate proper new location. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: black-swift: use ar9331_pbl_generic_startOleksij Rempel2019-01-241-28/+1
| | | | | | | | most ar9331 boards are almost identical. Remove as much duplicate code as possible. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: tplink-mr3020: use ar9331_pbl_generic_startOleksij Rempel2019-01-241-28/+1
| | | | | | | | most ar9331 boards are almost identical. Remove as much duplicate code as possible. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: update to GPL-2.0-or-later for files copyrighted by meOleksij Rempel2019-01-034-4/+4
| | | | | | Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-by: Roland Hieber <r.hieber@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: migrate all files to SPDXOleksij Rempel2019-01-0314-173/+14
| | | | | | Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-by: Roland Hieber <r.hieber@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: remove useless board filesOleksij Rempel2018-12-1714-182/+0
| | | | | | | | | In most cases we was executing only barebox_set_hostname(). Since we can extract host name from devicetree, we can drop all of this board files. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: port all mach* to multiimageOleksij Rempel2018-12-1725-150/+111
| | | | | Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: add initial 8devices-lima boardOleksij Rempel2018-02-131-0/+65
| | | | | | | | More information about this board can be found here: https://www.8devices.com/products/lima Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: add support for DPTechnics DPT-Module v1Oleksij Rempel2018-01-051-0/+20
| | | | | | | | This product can be found here: https://dptechnics.com/en/products/dpt-module-v1.html Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: tplink-mr3020: pbl: move hornet_mips24k_cp0_setup after flash addr testOleksij Rempel2017-08-151-2/+2
| | | | | | | this is needed to start zbarebox.bin from running barebox. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
* MIPS: tplink-mr3020: pbl: move WMAC init after flash addr testOleksij Rempel2017-08-151-2/+2
| | | | | | | | | | if this function is called in the RAM, we won't be able to continue start sequence. It brakes boot over JTAG use case. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Cc: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
* MIPS: ath79: add TP-Link WDR4300 board supportOleksij Rempel2017-08-153-0/+91
| | | | | | | | | This provides low level initialization of pll and ddr2. Resulting binary should work from SRAM, DDR2 and SPI flash. If started from DDR2 RAM level initialization will skipped. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
* MIPS: tplink-mr3020: pbl: init WMACYegor Yefremov2016-06-281-0/+2
| | | | | Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: black-swift: pbl: init WMACYegor Yefremov2016-06-281-0/+2
| | | | | Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: tplink-mr3020: fix "WPS" and "3G" LEDsAntony Pavlov2016-03-101-0/+6
| | | | | Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: black-swift: enable GPIO LEDAntony Pavlov2016-03-091-0/+6
| | | | | Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: tplink-mr3020: pbl: init cacheAntony Pavlov2016-03-091-0/+6
| | | | | Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: black-swift: pbl: init cacheAntony Pavlov2016-03-091-0/+6
| | | | | Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: black-swift: pbl: use more lowlevel init code from U-Boot_modAntony Pavlov2016-02-261-1/+3
| | | | | | Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: tplink-mr3020: pbl: use more lowlevel init code from U-Boot_modAntony Pavlov2016-02-261-1/+3
| | | | | | Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: tplink-mr3020: skip pbl lowlevel init if running from RAMAntony Pavlov2015-11-131-0/+3
| | | | | | | | | | TP-Link MR3020 has 4 MiB flash boot ROM. Usually boot ROM is mapped to 0xbfc00000. However, as AR9331 allows to remap boot ROM to 0xbf000000 it's better to assume that boot ROM starts at 0xbf000000. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: black-swift: skip pbl lowlevel init if running from RAMAntony Pavlov2015-11-131-0/+3
| | | | | | | | | Black Swift has 16 MiB flash boot ROM. The standard board's bootloader (U-Boot_mod) remaps boot ROM to 0xbf000000. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Tested-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: tplink-mr3020: add pbl low level initAntony Pavlov2015-11-031-0/+6
| | | | | Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: ath79: add black-swift board supportAntony Pavlov2015-11-033-0/+69
| | | | | | | | | | | Black Swift is a tiny coin-sized embedded computer based on AR9331 SoC. See http://www.black-swift.com/ for details. See also Black Swift kickstarter page: https://www.kickstarter.com/projects/1133560316/black-swift-tiny-wireless-computer Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: tplink-mr3020: enable nmonAntony Pavlov2015-05-051-0/+3
| | | | | Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: debug_ll_ns16550.h: drop _ns16550 suffixAntony Pavlov2015-05-054-6/+6
| | | | | | | | | | | | | This commit makes it possible to have unified debug_ll_* assembler routines for differrent UART program model. E.g. we can use debug_ll_putc() routine in common code without knowledge on exact UART model: ns16550 or ar933x. Also rename *_check_char -> *_tstc. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: tplink-mr3020: enable PBL and compressionOleksij Rempel2015-05-051-0/+32
| | | | | | Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: qemu-malta: debug_ll: fix serial port speedAntony Pavlov2015-02-161-1/+4
| | | | | | | | | | qemu-malta.dts uses clock-frequency = <1843200>, but debug_ll.h for Malta uses another value. This patch fixes this inconsistency. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* sizes.h: move include/sizes.h to include/linux/sizes.hMasahiro Yamada2015-01-082-2/+2
| | | | | | | | | | | | | | This file originates in Linux. Linux has it under include/linux/ directory since commit dccd2304cc90. Let's move it to the same place as well in barebox. This commit was generated by the following commands: find -name '*.[chS]' | xargs sed -i -e 's:<sizes.h>:<linux/sizes.h>:' git mv include/sizes.h include/linux/ Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: add MIPS Creator CI20 board supportAntony Pavlov2014-09-114-0/+94
| | | | | Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Documentation: remove doxygen documentationSascha Hauer2014-06-265-215/+0
| | | | | | | The doxygen documentation is long outdated. Remove it. It will be replaced with sphinx based documentation later. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: dlink-dir-320: switch to dtAntony Pavlov2014-05-273-49/+20
| | | | | Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Merge branch 'for-next/mips'Sascha Hauer2014-05-053-25/+0
|\ | | | | | | | | Conflicts: arch/mips/boards/loongson-ls1b/serial.c
| * MIPS: loongson-ls1b: switch to device treeAntony Pavlov2014-04-083-25/+0
| | | | | | | | | | Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | x86: ns16550: Rework driver to allow for x86 I/O spaceMichel Stam2014-04-092-2/+2
|/ | | | | | | | | | | | The current implementation fakes a memory-mapped I/O device at 0x3f8 and 0x2f8, then uses platform read/write functions to do the actual reading and writing. These platform functions only exist for the x86 platform; better to move the I/O routines into the driver and have the driver request I/O ports using request_ioport_region. Signed-off-by: Michel Stam <michel@reverze.net> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: tplink-mr3020: add documentationAntony Pavlov2014-03-281-0/+64
| | | | | Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: ath79: add tplink-mr3020 board supportAntony Pavlov2014-03-282-0/+28
| | | | | | | | | | | | | | | | This board support code can be used for TP-LINK WR703 too. TP-LINK WR703 is very similar to TP-LINK MR3020, there are some non-essential differences: * WR703 is smaller and cheaper; * WR703 has only one led, but MR3020 has five leds; * MR3020 uses mini-USB connector, WR703 uses micro-USB connector. See https://forum.openwrt.org/viewtopic.php?id=45159 for details. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: boards: rename rzx50 -> ritmix-rzx50Antony Pavlov2014-03-265-1/+1
| | | | | | | | All MIPS board use <vendor>-<model> name template save Ritmix RZX-50. This commit fixes this inconsistency. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: rzx50: drop console initialization in board codeAntony Pavlov2014-03-262-8/+3
| | | | | Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: loongson-ls1b: add documentationAntony Pavlov2014-01-301-0/+47
| | | | | Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: loongson-ls1b: add NMON supportAntony Pavlov2014-01-301-0/+3
| | | | | Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: loongson-ls1b: add PBL supportAntony Pavlov2014-01-301-0/+38
| | | | | Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: loongson-ls1b: add ns16550-based consoleAntony Pavlov2014-01-302-0/+23
| | | | | Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: loongson-ls1b: add DEBUG_LL supportAntony Pavlov2014-01-301-0/+34
| | | | | Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: mach-loongson: add loongson-ls1b boardAntony Pavlov2014-01-302-0/+13
| | | | | Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: qemu-malta: doc: add gxemul documentationAntony Pavlov2013-10-281-0/+6
| | | | | | | | | | | | GXemul is another MIPS emulator with Malta board support. As opposed to qemu GXemul supports only fixed GT64120 YAMON-compatible PCI mapping. As now barebox uses YAMON-style mapping we can use GXemul for barebox run. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: qemu-malta: use YAMON-style GT64120 memory mapAntony Pavlov2013-10-281-0/+53
| | | | | | | | | | | | | There are some reasons for using YAMON-style memory map: * we can run Linux kernel from barebox; * we can use GXemul for running barebox. YAMON-style GT64120 memory map make move UART to the new position. The files gt64120.h and mach-gt64120.h are imported from Linux. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: qemu-malta: update qemu-malta.doxAntony Pavlov2013-10-281-1/+1
| | | | | | | | | Only PBL-enabled barebox-flash-image can correctly get round BoadrID address (0x1fc00010), so let's recommend barebox-flash-image. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* MIPS: qemu-malta: don't use BoardID address for executable codeAntony Pavlov2013-10-281-0/+12
| | | | | | | | | | On MIPS Technologies boards 0x1fc00010 address is reserved for BoardID. The hardware or emulator intercepts accesses to this address and we can't use this address for storing code. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-21 19:31:38 +0000