dts: update to v5.11-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 6 insertions, 2 deletions

diff --git a/dts/Bindings/interrupt-controller/fsl,ls-extirq.txt b/dts/Bindings/interrupt-controller/fsl,ls-extirq.txt
index f0ad7801e8..4d47df1a5c 100644
--- a/dts/Bindings/interrupt-controller/fsl,ls-extirq.txt
+++ b/dts/Bindings/interrupt-controller/fsl,ls-extirq.txt
@@ -1,6 +1,7 @@
 * Freescale Layerscape external IRQs
 
-Some Layerscape SOCs (LS1021A, LS1043A, LS1046A) support inverting
+Some Layerscape SOCs (LS1021A, LS1043A, LS1046A
+LS1088A, LS208xA, LX216xA) support inverting
 the polarity of certain external interrupt lines.
 
 The device node must be a child of the node representing the
@@ -8,12 +9,15 @@ Supplemental Configuration Unit (SCFG).
 
 Required properties:
 - compatible: should be "fsl,<soc-name>-extirq", e.g. "fsl,ls1021a-extirq".
+  "fsl,ls1043a-extirq": for LS1043A, LS1046A.
+  "fsl,ls1088a-extirq": for LS1088A, LS208xA, LX216xA.
 - #interrupt-cells: Must be 2. The first element is the index of the
   external interrupt line. The second element is the trigger type.
 - #address-cells: Must be 0.
 - interrupt-controller: Identifies the node as an interrupt controller
 - reg: Specifies the Interrupt Polarity Control Register (INTPCR) in
-  the SCFG.
+  the SCFG or the External Interrupt Control Register (IRQCR) in
+  the ISC.
 - interrupt-map: Specifies the mapping from external interrupts to GIC
   interrupts.
 - interrupt-map-mask: Must be <0xffffffff 0>.