diff options
author | Sascha Hauer <s.hauer@pengutronix.de> | 2014-04-25 11:22:32 +0200 |
---|---|---|
committer | Sascha Hauer <s.hauer@pengutronix.de> | 2014-04-28 09:08:46 +0200 |
commit | 00ce25c6dcdae5582ae4be37147ab33678adc995 (patch) | |
tree | 41c93102ae304a61738c31353e3cb5336ef0b297 /dts/Bindings/media/exynos4-fimc-is.txt | |
parent | 0af79fbb6779921d3f1962773adb7fb57d3c89d4 (diff) | |
download | barebox-00ce25c6dcdae5582ae4be37147ab33678adc995.tar.gz barebox-00ce25c6dcdae5582ae4be37147ab33678adc995.tar.xz |
Add devicetree source files as of Linux-3.15-rc2
This adds the Linux dts files to barebox. The dts files are
generated from Ian Campbells device-tree-rebasing.git:
git://xenbits.xen.org/people/ianc/device-tree-rebasing.git
The dts are found in dts/ in the barebox repository and
will be updated from upstream regularly, probably for each upstream
-rc.
To keep the synchronization with upstream easy no changes to
the original files are allowed under dts/. Instead changes to
upstream dts files will be done using overlays in arch/$ARCH/dts/.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/Bindings/media/exynos4-fimc-is.txt')
-rw-r--r-- | dts/Bindings/media/exynos4-fimc-is.txt | 49 |
1 files changed, 49 insertions, 0 deletions
diff --git a/dts/Bindings/media/exynos4-fimc-is.txt b/dts/Bindings/media/exynos4-fimc-is.txt new file mode 100644 index 0000000000..55c9ad6f95 --- /dev/null +++ b/dts/Bindings/media/exynos4-fimc-is.txt @@ -0,0 +1,49 @@ +Exynos4x12 SoC series Imaging Subsystem (FIMC-IS) + +The FIMC-IS is a subsystem for processing image signal from an image sensor. +The Exynos4x12 SoC series FIMC-IS V1.5 comprises of a dedicated ARM Cortex-A5 +processor, ISP, DRC and FD IP blocks and peripheral devices such as UART, I2C +and SPI bus controllers, PWM and ADC. + +fimc-is node +------------ + +Required properties: +- compatible : should be "samsung,exynos4212-fimc-is" for Exynos4212 and + Exynos4412 SoCs; +- reg : physical base address and length of the registers set; +- interrupts : must contain two FIMC-IS interrupts, in order: ISP0, ISP1; +- clocks : list of clock specifiers, corresponding to entries in + clock-names property; +- clock-names : must contain "ppmuispx", "ppmuispx", "lite0", "lite1" + "mpll", "sysreg", "isp", "drc", "fd", "mcuisp", "uart", + "ispdiv0", "ispdiv1", "mcuispdiv0", "mcuispdiv1", "aclk200", + "div_aclk200", "aclk400mcuisp", "div_aclk400mcuisp" entries, + matching entries in the clocks property. +pmu subnode +----------- + +Required properties: + - reg : must contain PMU physical base address and size of the register set. + +The following are the FIMC-IS peripheral device nodes and can be specified +either standalone or as the fimc-is node child nodes. + +i2c-isp (ISP I2C bus controller) nodes +------------------------------------------ + +Required properties: + +- compatible : should be "samsung,exynos4212-i2c-isp" for Exynos4212 and + Exynos4412 SoCs; +- reg : physical base address and length of the registers set; +- clocks : must contain gate clock specifier for this controller; +- clock-names : must contain "i2c_isp" entry. + +For the above nodes it is required to specify a pinctrl state named "default", +according to the pinctrl bindings defined in ../pinctrl/pinctrl-bindings.txt. + +Device tree nodes of the image sensors' controlled directly by the FIMC-IS +firmware must be child nodes of their corresponding ISP I2C bus controller node. +The data link of these image sensors must be specified using the common video +interfaces bindings, defined in video-interfaces.txt. |