diff options
author | Sascha Hauer <s.hauer@pengutronix.de> | 2014-04-25 11:22:32 +0200 |
---|---|---|
committer | Sascha Hauer <s.hauer@pengutronix.de> | 2014-04-28 09:08:46 +0200 |
commit | 00ce25c6dcdae5582ae4be37147ab33678adc995 (patch) | |
tree | 41c93102ae304a61738c31353e3cb5336ef0b297 /dts/Bindings/media/st-rc.txt | |
parent | 0af79fbb6779921d3f1962773adb7fb57d3c89d4 (diff) | |
download | barebox-00ce25c6dcdae5582ae4be37147ab33678adc995.tar.gz barebox-00ce25c6dcdae5582ae4be37147ab33678adc995.tar.xz |
Add devicetree source files as of Linux-3.15-rc2
This adds the Linux dts files to barebox. The dts files are
generated from Ian Campbells device-tree-rebasing.git:
git://xenbits.xen.org/people/ianc/device-tree-rebasing.git
The dts are found in dts/ in the barebox repository and
will be updated from upstream regularly, probably for each upstream
-rc.
To keep the synchronization with upstream easy no changes to
the original files are allowed under dts/. Instead changes to
upstream dts files will be done using overlays in arch/$ARCH/dts/.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'dts/Bindings/media/st-rc.txt')
-rw-r--r-- | dts/Bindings/media/st-rc.txt | 29 |
1 files changed, 29 insertions, 0 deletions
diff --git a/dts/Bindings/media/st-rc.txt b/dts/Bindings/media/st-rc.txt new file mode 100644 index 0000000000..05c432d08b --- /dev/null +++ b/dts/Bindings/media/st-rc.txt @@ -0,0 +1,29 @@ +Device-Tree bindings for ST IRB IP + +Required properties: + - compatible: Should contain "st,comms-irb". + - reg: Base physical address of the controller and length of memory + mapped region. + - interrupts: interrupt-specifier for the sole interrupt generated by + the device. The interrupt specifier format depends on the interrupt + controller parent. + - rx-mode: can be "infrared" or "uhf". This property specifies the L1 + protocol used for receiving remote control signals. rx-mode should + be present iff the rx pins are wired up. + - tx-mode: should be "infrared". This property specifies the L1 + protocol used for transmitting remote control signals. tx-mode should + be present iff the tx pins are wired up. + +Optional properties: + - pinctrl-names, pinctrl-0: the pincontrol settings to configure muxing + properly for IRB pins. + - clocks : phandle with clock-specifier pair for IRB. + +Example node: + + rc: rc@fe518000 { + compatible = "st,comms-irb"; + reg = <0xfe518000 0x234>; + interrupts = <0 203 0>; + rx-mode = "infrared"; + }; |