summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/display/bridge
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/display/bridge')
-rw-r--r--dts/Bindings/display/bridge/analogix_dp.txt2
-rw-r--r--dts/Bindings/display/bridge/anx7814.txt2
-rw-r--r--dts/Bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt2
-rw-r--r--dts/Bindings/display/bridge/sii902x.txt4
-rw-r--r--dts/Bindings/display/bridge/sii9234.txt2
-rw-r--r--dts/Bindings/display/bridge/sil-sii8620.txt2
6 files changed, 4 insertions, 10 deletions
diff --git a/dts/Bindings/display/bridge/analogix_dp.txt b/dts/Bindings/display/bridge/analogix_dp.txt
index 0c7473d..027d76c 100644
--- a/dts/Bindings/display/bridge/analogix_dp.txt
+++ b/dts/Bindings/display/bridge/analogix_dp.txt
@@ -15,8 +15,6 @@ Required properties for dp-controller:
from common clock binding: handle to dp clock.
-clock-names:
from common clock binding: Shall be "dp".
- -interrupt-parent:
- phandle to Interrupt combiner node.
-phys:
from general PHY binding: the phandle for the PHY device.
-phy-names:
diff --git a/dts/Bindings/display/bridge/anx7814.txt b/dts/Bindings/display/bridge/anx7814.txt
index b2a22c2..dbd7c84 100644
--- a/dts/Bindings/display/bridge/anx7814.txt
+++ b/dts/Bindings/display/bridge/anx7814.txt
@@ -8,8 +8,6 @@ Required properties:
- compatible : "analogix,anx7814"
- reg : I2C address of the device
- - interrupt-parent : Should be the phandle of the interrupt controller
- that services interrupts for this device
- interrupts : Should contain the INTP interrupt
- hpd-gpios : Which GPIO to use for hpd
- pd-gpios : Which GPIO to use for power down
diff --git a/dts/Bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt b/dts/Bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt
index aacc8b9..09e0a21 100644
--- a/dts/Bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt
+++ b/dts/Bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt
@@ -19,8 +19,6 @@ hardware are EDID, HPD, and interrupts.
stdp4028-ge-b850v3-fw required properties:
- compatible : "megachips,stdp4028-ge-b850v3-fw"
- reg : I2C bus address
- - interrupt-parent : phandle of the interrupt controller that services
- interrupts to the device
- interrupts : one interrupt should be described here, as in
<0 IRQ_TYPE_LEVEL_HIGH>
- ports : One input port(reg = <0>) and one output port(reg = <1>)
diff --git a/dts/Bindings/display/bridge/sii902x.txt b/dts/Bindings/display/bridge/sii902x.txt
index 56a3e68..72d2dc6 100644
--- a/dts/Bindings/display/bridge/sii902x.txt
+++ b/dts/Bindings/display/bridge/sii902x.txt
@@ -5,8 +5,8 @@ Required properties:
- reg: i2c address of the bridge
Optional properties:
- - interrupts-extended or interrupt-parent + interrupts: describe
- the interrupt line used to inform the host about hotplug events.
+ - interrupts: describe the interrupt line used to inform the host
+ about hotplug events.
- reset-gpios: OF device-tree gpio specification for RST_N pin.
Optional subnodes:
diff --git a/dts/Bindings/display/bridge/sii9234.txt b/dts/Bindings/display/bridge/sii9234.txt
index 88041ba..a55bf77 100644
--- a/dts/Bindings/display/bridge/sii9234.txt
+++ b/dts/Bindings/display/bridge/sii9234.txt
@@ -7,7 +7,7 @@ Required properties:
- iovcc18-supply : I/O Supply Voltage (1.8V)
- avcc12-supply : TMDS Analog Supply Voltage (1.2V)
- cvcc12-supply : Digital Core Supply Voltage (1.2V)
- - interrupts, interrupt-parent: interrupt specifier of INT pin
+ - interrupts: interrupt specifier of INT pin
- reset-gpios: gpio specifier of RESET pin (active low)
- video interfaces: Device node can contain two video interface port
nodes for HDMI encoder and connector according to [1].
diff --git a/dts/Bindings/display/bridge/sil-sii8620.txt b/dts/Bindings/display/bridge/sil-sii8620.txt
index 9409d9c..b05052f 100644
--- a/dts/Bindings/display/bridge/sil-sii8620.txt
+++ b/dts/Bindings/display/bridge/sil-sii8620.txt
@@ -5,7 +5,7 @@ Required properties:
- reg: i2c address of the bridge
- cvcc10-supply: Digital Core Supply Voltage (1.0V)
- iovcc18-supply: I/O Supply Voltage (1.8V)
- - interrupts, interrupt-parent: interrupt specifier of INT pin
+ - interrupts: interrupt specifier of INT pin
- reset-gpios: gpio specifier of RESET pin
- clocks, clock-names: specification and name of "xtal" clock
- video interfaces: Device node can contain video interface port