| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
| |
Calxeda went out off business back in 2013. The Calxeda Highbank port
did not get any active maintenance since then. Since the Highbank
support plays some tricks with devices trees passed to barebox from the
firmware it becomes a maintenance burden. Remove Highbank support
altogether.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The defconfig files are long untouched and a
make xy_defconfig; make savedefconfig usually generates quite
a different looking file. Refresh them to make it easier to generate
patches against the configs using
make xy_defconfig; make menuconfig; make savedefconfig
This has been done with the following script.
for a in arch/*; do
arch=$(basename $a)
for c in $a/configs/*; do
config=$(basename $c)
export ARCH=$arch
make $config && make savedefconfig && mv defconfig $c
done
done
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Currently it's hardcoded for each board which defaultenv version is
used. This is unfortunate since some people like the other defaultenv
version better and may want to select it.
This patch removes the board specific environment path
CONFIG_DEFAULT_ENVIRONMENT_PATH and instead adds it via:
if (IS_ENABLED(CONFIG_DEFAULT_ENVIRONMENT_GENERIC))
defaultenv_append_directory(defaultenv_<board>);
This way we can make sure that the defaultenv-1 board specific bits are
only compiled in when defaultenv-1 is actually in use.
The next step is to make the defaultenv version selection a user visible
choice.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
|
|
|
|
| |
bootm has a C API, so the bootm options have to depend on the
option providing the bootm code (CONFIG_BOOTM), not on the
option providing the command (CONFIG_CMD_BOOTM). Fixing the
dependencies makes it possible to fully use bootm from C without
enabling the bootm command support.
This also removes the CMD_ prefix from the options which means
we have to update the defconfigs aswell.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
|
|
| |
This will allow to have hw driver or asm optimised driver.
Use a priority level to determine which one to use at runtime.
The generic one will be 0.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
| |
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
|
|
|
| |
* this compile option actually turns on a command, so name it
accordingly
* also move the Kconfig definition into commands/Kconfig, thus
placing getopt into the "Network commands" section
* while at it, improve Kconfig documention
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
|
|
|
| |
* this compile option actually turns on a command, so name it
accordingly
* also move the Kconfig definition into commands/Kconfig, thus
placing getopt into the "Network commands" section
* while at it, improve Kconfig documention
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
| |
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
mem size
the dtb is at 0x1000
if no dtb present use C code device
keep in C the timer/gpio/uart
have a nice tree
barebox 2013.02.0-00294-g6802ddf #124 Wed Feb 13 02:31:01 CST 2013
Board: Calxeda Highbank
memory: ram0: 0xff900000@0x0
highbank: dtb probed memory size
registered netconsole as cs1
malloc space: 0x03500000 -> 0x03efffff (size 10 MiB)
Open /dev/env0 No such file or directory
no valid environment found on /dev/env0. Using default environment
running /env/bin/init...
ahci ffe08000.sata: port 0: SATA link ok
ahci ffe08000.sata: port 0: Spinning up device...
ahci ffe08000.sata: port 0: ok.
ahci ffe08000.sata: registered /dev/ata0
eth0: got preset MAC address: 52:54:00:12:34:56
eth1: got preset MAC address: 52:54:00:12:34:57
Hit any key to stop autoboot: 3
[barebox@Calxeda Highbank]:/
# devinfo
devices:
`---- platform
`---- mem0
`---- 0x00000000-0x3fffffff: /dev/ram0
`---- 0x00001000-0x00010fff: /dev/dtb
`---- mem1
`---- 0x00000000-0x000051af: /dev/defaultenv
`---- mem2
`---- 0x00000000-0xfffffffe: /dev/mem
`---- cs1
`---- fff10600.timer
`---- fff10620.watchdog
`---- fff11000.interrupt-controller
`---- l2-cache
`---- ffe08000.sata
`---- 0x00000000-0x3fffffff: /dev/ata0
`---- 0x00100000-0x014fffff: /dev/ata0.0
`---- 0x01500000-0x3fffffff: /dev/ata0.1
`---- ffe0e000.sdhci
`---- fff00000.memory-controller
`---- mem3
`---- fff3c000.sregs
`---- fff3c200.sregs
`---- fff50000.ethernet
`---- eth0
`---- fff51000.ethernet
`---- eth1
`---- amba
`---- sp804
`---- uart-pl011
`---- cs0
`---- fff30000.gpio
`---- fff31000.gpio
`---- fff32000.gpio
`---- fff33000.gpio
`---- fff35000.rtc
`---- fs
`---- ramfs0
`---- devfs0
`---- net
`---- global
drivers:
uart-pl011
sp804
pl061_gpio
ramfs
devfs
tftp
hb-xgmac
ahci
mem
[barebox@Calxeda Highbank]:/
#
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
currently only tested under qemu
qemu-system-arm -M highbank -nographic -m 4089 -kernel build/highbank/arch/arm/pbl/zbarebox -tftp "." -drive id=disk,if=ide,file=disk.img -device ide-drive,drive=disk,bus=ide.0
with:
- timer (AMBA SP804)
- uart (AMBA PL011)
- gpio (AMBA PL061)
- ahci
- net (XGMAC)
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|