dts: update to v5.14-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

33 files changed, 976 insertions, 548 deletions

diff --git a/dts/Bindings/i2c/aspeed,i2c.yaml b/dts/Bindings/i2c/aspeed,i2c.yaml
new file mode 100644
index 0000000000..ea643e6c3e
--- /dev/null
+++ b/dts/Bindings/i2c/aspeed,i2c.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/aspeed,i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED I2C on the AST24XX, AST25XX, and AST26XX SoCs Device Tree Bindings
+
+maintainers:
+  - Rayn Chen <rayn_chen@aspeedtech.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2400-i2c-bus
+      - aspeed,ast2500-i2c-bus
+      - aspeed,ast2600-i2c-bus
+
+  reg:
+    minItems: 1
+    items:
+      - description: address offset and range of bus
+      - description: address offset and range of bus buffer
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description:
+      root clock of bus, should reference the APB
+      clock in the second cell
+
+  resets:
+    maxItems: 1
+
+  bus-frequency:
+    minimum: 500
+    maximum: 4000000
+    default: 100000
+    description: frequency of the bus clock in Hz defaults to 100 kHz when not
+      specified
+
+  multi-master:
+    type: boolean
+    description:
+      states that there is another master active on this bus
+
+required:
+  - reg
+  - compatible
+  - clocks
+  - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/aspeed-clock.h>
+    i2c0: i2c-bus@40 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      #interrupt-cells = <1>;
+      compatible = "aspeed,ast2500-i2c-bus";
+      reg = <0x40 0x40>;
+      clocks = <&syscon ASPEED_CLK_APB>;
+      resets = <&syscon ASPEED_RESET_I2C>;
+      bus-frequency = <100000>;
+      interrupts = <0>;
+      interrupt-parent = <&i2c_ic>;
+    };
diff --git a/dts/Bindings/i2c/brcm,brcmstb-i2c.yaml b/dts/Bindings/i2c/brcm,brcmstb-i2c.yaml
index edbca24761..7070c04469 100644
--- a/dts/Bindings/i2c/brcm,brcmstb-i2c.yaml
+++ b/dts/Bindings/i2c/brcm,brcmstb-i2c.yaml
@@ -21,7 +21,6 @@ properties:
 
   reg:
     minItems: 1
-    maxItems: 2
     items:
       - description: BSC register range
       - description: Auto-I2C register range
diff --git a/dts/Bindings/i2c/i2c-aspeed.txt b/dts/Bindings/i2c/i2c-aspeed.txt
deleted file mode 100644
index b47f6ccb19..0000000000
--- a/dts/Bindings/i2c/i2c-aspeed.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-Device tree configuration for the I2C busses on the AST24XX, AST25XX, and AST26XX SoCs.
-
-Required Properties:
-- #address-cells	: should be 1
-- #size-cells		: should be 0
-- reg			: address offset and range of bus
-- compatible		: should be "aspeed,ast2400-i2c-bus"
-			  or "aspeed,ast2500-i2c-bus"
-			  or "aspeed,ast2600-i2c-bus"
-- clocks		: root clock of bus, should reference the APB
-			  clock in the second cell
-- resets		: phandle to reset controller with the reset number in
-			  the second cell
-- interrupts		: interrupt number
-
-Optional Properties:
-- bus-frequency	: frequency of the bus clock in Hz defaults to 100 kHz when not
-		  specified
-- multi-master	: states that there is another master active on this bus.
-
-Example:
-
-i2c {
-	compatible = "simple-bus";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges = <0 0x1e78a000 0x1000>;
-
-	i2c_ic: interrupt-controller@0 {
-		#interrupt-cells = <1>;
-		compatible = "aspeed,ast2400-i2c-ic";
-		reg = <0x0 0x40>;
-		interrupts = <12>;
-		interrupt-controller;
-	};
-
-	i2c0: i2c-bus@40 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#interrupt-cells = <1>;
-		reg = <0x40 0x40>;
-		compatible = "aspeed,ast2400-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		bus-frequency = <100000>;
-		interrupts = <0>;
-		interrupt-parent = <&i2c_ic>;
-	};
-};
diff --git a/dts/Bindings/i2c/i2c-at91.txt b/dts/Bindings/i2c/i2c-at91.txt
index 96c914e048..2015f50aed 100644
--- a/dts/Bindings/i2c/i2c-at91.txt
+++ b/dts/Bindings/i2c/i2c-at91.txt
@@ -73,7 +73,7 @@ i2c0: i2c@f8034600 {
 	pinctrl-0 = <&pinctrl_i2c0>;
 	pinctrl-1 = <&pinctrl_i2c0_gpio>;
 	sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
-	scl-gpios = <&pioA 31 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&pioA 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 
 	wm8731: wm8731@1a {
 		compatible = "wm8731";
diff --git a/dts/Bindings/i2c/i2c-davinci.txt b/dts/Bindings/i2c/i2c-davinci.txt
index b745f37061..6590501c53 100644
--- a/dts/Bindings/i2c/i2c-davinci.txt
+++ b/dts/Bindings/i2c/i2c-davinci.txt
@@ -8,7 +8,7 @@ Required properties:
 - reg : Offset and length of the register set for the device
 - clocks: I2C functional clock phandle.
 	  For 66AK2G this property should be set per binding,
-	  Documentation/devicetree/bindings/clock/ti,sci-clk.txt
+	  Documentation/devicetree/bindings/clock/ti,sci-clk.yaml
 
 SoC-specific Required Properties:
 
@@ -17,7 +17,7 @@ The following are mandatory properties for Keystone 2 66AK2G SoCs only:
 - power-domains:	Should contain a phandle to a PM domain provider node
 			and an args specifier containing the I2C device id
 			value. This property is as per the binding,
-			Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
+			Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml
 
 Recommended properties :
 - interrupts : standard interrupt property.
diff --git a/dts/Bindings/i2c/i2c-demux-pinctrl.txt b/dts/Bindings/i2c/i2c-demux-pinctrl.txt
index 81b5d55086..86b2e433a9 100644
--- a/dts/Bindings/i2c/i2c-demux-pinctrl.txt
+++ b/dts/Bindings/i2c/i2c-demux-pinctrl.txt
@@ -27,7 +27,7 @@ Required properties:
 - i2c-bus-name: The name of this bus. Also needed as pinctrl-name for the I2C
 		parents.
 
-Furthermore, I2C mux properties and child nodes. See i2c-mux.txt in this
+Furthermore, I2C mux properties and child nodes. See i2c-mux.yaml in this
 directory.
 
 Example:
diff --git a/dts/Bindings/i2c/i2c-mt65xx.txt b/dts/Bindings/i2c/i2c-mt65xx.txt
index 7f0194fdd0..5ea216ae70 100644
--- a/dts/Bindings/i2c/i2c-mt65xx.txt
+++ b/dts/Bindings/i2c/i2c-mt65xx.txt
@@ -15,6 +15,7 @@ Required properties:
       "mediatek,mt8173-i2c": for MediaTek MT8173
       "mediatek,mt8183-i2c": for MediaTek MT8183
       "mediatek,mt8192-i2c": for MediaTek MT8192
+      "mediatek,mt8195-i2c", "mediatek,mt8192-i2c": for MediaTek MT8195
       "mediatek,mt8516-i2c", "mediatek,mt2712-i2c": for MediaTek MT8516
   - reg: physical base address of the controller and dma base, length of memory
     mapped region.
@@ -32,6 +33,7 @@ Optional properties:
   - mediatek,have-pmic: platform can control i2c form special pmic side.
     Only mt6589 and mt8135 support this feature.
   - mediatek,use-push-pull: IO config use push-pull mode.
+  - vbus-supply: phandle to the regulator that provides power to SCL/SDA.
 
 Example:
 
diff --git a/dts/Bindings/i2c/i2c-mux-gpio.txt b/dts/Bindings/i2c/i2c-mux-gpio.txt
index 21da3ecbb3..d4cf10582a 100644
--- a/dts/Bindings/i2c/i2c-mux-gpio.txt
+++ b/dts/Bindings/i2c/i2c-mux-gpio.txt
@@ -22,8 +22,8 @@ Required properties:
 - i2c-parent: The phandle of the I2C bus that this multiplexer's master-side
   port is connected to.
 - mux-gpios: list of gpios used to control the muxer
-* Standard I2C mux properties. See i2c-mux.txt in this directory.
-* I2C child bus nodes. See i2c-mux.txt in this directory.
+* Standard I2C mux properties. See i2c-mux.yaml in this directory.
+* I2C child bus nodes. See i2c-mux.yaml in this directory.
 
 Optional properties:
 - idle-state: value to set the muxer to when idle. When no value is
@@ -62,7 +62,6 @@ Example:
 				reg = <0x3c>;
 				pwms = <&pwm 4 3000>;
 				reset-gpios = <&gpio2 7 1>;
-				reset-active-low;
 			};
 		};
 
diff --git a/dts/Bindings/i2c/i2c-mux-gpmux.txt b/dts/Bindings/i2c/i2c-mux-gpmux.txt
deleted file mode 100644
index 8b444b94e9..0000000000
--- a/dts/Bindings/i2c/i2c-mux-gpmux.txt
+++ /dev/null
@@ -1,99 +0,0 @@
-General Purpose I2C Bus Mux
-
-This binding describes an I2C bus multiplexer that uses a mux controller
-from the mux subsystem to route the I2C signals.
-
-                                  .-----.  .-----.
-                                  | dev |  | dev |
-    .------------.                '-----'  '-----'
-    | SoC        |                   |        |
-    |            |          .--------+--------'
-    |   .------. |  .------+    child bus A, on MUX value set to 0
-    |   | I2C  |-|--| Mux  |
-    |   '------' |  '--+---+    child bus B, on MUX value set to 1
-    |   .------. |     |    '----------+--------+--------.
-    |   | MUX- | |     |               |        |        |
-    |   | Ctrl |-|-----+            .-----.  .-----.  .-----.
-    |   '------' |                  | dev |  | dev |  | dev |
-    '------------'                  '-----'  '-----'  '-----'
-
-Required properties:
-- compatible: i2c-mux
-- i2c-parent: The phandle of the I2C bus that this multiplexer's master-side
-  port is connected to.
-- mux-controls: The phandle of the mux controller to use for operating the
-  mux.
-* Standard I2C mux properties. See i2c-mux.txt in this directory.
-* I2C child bus nodes. See i2c-mux.txt in this directory. The sub-bus number
-  is also the mux-controller state described in ../mux/mux-controller.txt
-
-Optional properties:
-- mux-locked: If present, explicitly allow unrelated I2C transactions on the
-  parent I2C adapter at these times:
-   + during setup of the multiplexer
-   + between setup of the multiplexer and the child bus I2C transaction
-   + between the child bus I2C transaction and releasing of the multiplexer
-   + during releasing of the multiplexer
-  However, I2C transactions to devices behind all I2C multiplexers connected
-  to the same parent adapter that this multiplexer is connected to are blocked
-  for the full duration of the complete multiplexed I2C transaction (i.e.
-  including the times covered by the above list).
-  If mux-locked is not present, the multiplexer is assumed to be parent-locked.
-  This means that no unrelated I2C transactions are allowed on the parent I2C
-  adapter for the complete multiplexed I2C transaction.
-  The properties of mux-locked and parent-locked multiplexers are discussed
-  in more detail in Documentation/i2c/i2c-topology.rst.
-
-For each i2c child node, an I2C child bus will be created. They will
-be numbered based on their order in the device tree.
-
-Whenever an access is made to a device on a child bus, the value set
-in the relevant node's reg property will be set as the state in the
-mux controller.
-
-Example:
-	mux: mux-controller {
-		compatible = "gpio-mux";
-		#mux-control-cells = <0>;
-
-		mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>,
-			    <&pioA 1 GPIO_ACTIVE_HIGH>;
-	};
-
-	i2c-mux {
-		compatible = "i2c-mux";
-		mux-locked;
-		i2c-parent = <&i2c1>;
-
-		mux-controls = <&mux>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			ssd1307: oled@3c {
-				compatible = "solomon,ssd1307fb-i2c";
-				reg = <0x3c>;
-				pwms = <&pwm 4 3000>;
-				reset-gpios = <&gpio2 7 1>;
-				reset-active-low;
-			};
-		};
-
-		i2c@3 {
-			reg = <3>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			pca9555: pca9555@20 {
-				compatible = "nxp,pca9555";
-				gpio-controller;
-				#gpio-cells = <2>;
-				reg = <0x20>;
-			};
-		};
-	};
diff --git a/dts/Bindings/i2c/i2c-mux-gpmux.yaml b/dts/Bindings/i2c/i2c-mux-gpmux.yaml
new file mode 100644
index 0000000000..9b0603a72f
--- /dev/null
+++ b/dts/Bindings/i2c/i2c-mux-gpmux.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-mux-gpmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: General Purpose I2C Bus Mux
+
+maintainers:
+  - Peter Rosin <peda@axentia.se>
+
+description: |+
+  This binding describes an I2C bus multiplexer that uses a mux controller
+  from the mux subsystem to route the I2C signals.
+
+                                    .-----.  .-----.
+                                    | dev |  | dev |
+      .------------.                '-----'  '-----'
+      | SoC        |                   |        |
+      |            |          .--------+--------'
+      |   .------. |  .------+    child bus A, on MUX value set to 0
+      |   | I2C  |-|--| Mux  |
+      |   '------' |  '--+---+    child bus B, on MUX value set to 1
+      |   .------. |     |    '----------+--------+--------.
+      |   | MUX- | |     |               |        |        |
+      |   | Ctrl |-|-----+            .-----.  .-----.  .-----.
+      |   '------' |                  | dev |  | dev |  | dev |
+      '------------'                  '-----'  '-----'  '-----'
+
+
+
+allOf:
+  - $ref: /schemas/i2c/i2c-mux.yaml#
+
+properties:
+  compatible:
+    const: i2c-mux
+
+  i2c-parent:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The phandle of the I2C bus that this multiplexer's master-side port is
+      connected to.
+
+  mux-controls:
+    maxItems: 1
+    description:
+      The mux-controller states are the I2C sub-bus numbers.
+
+  mux-locked:
+    type: boolean
+    description: |
+      Explicitly allow unrelated I2C transactions on the parent I2C adapter at
+      these times:
+       - during setup of the multiplexer
+       - between setup of the multiplexer and the child bus I2C transaction
+       - between the child bus I2C transaction and releasing of the multiplexer
+       - during releasing of the multiplexer
+
+      However, I2C transactions to devices behind all I2C multiplexers connected
+      to the same parent adapter that this multiplexer is connected to are blocked
+      for the full duration of the complete multiplexed I2C transaction (i.e.
+      including the times covered by the above list).
+      If mux-locked is not present, the multiplexer is assumed to be parent-locked.
+      This means that no unrelated I2C transactions are allowed on the parent I2C
+      adapter for the complete multiplexed I2C transaction.
+      The properties of mux-locked and parent-locked multiplexers are discussed
+      in more detail in Documentation/i2c/i2c-topology.rst.
+
+required:
+  - compatible
+  - i2c-parent
+  - mux-controls
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    mux: mux-controller {
+        compatible = "gpio-mux";
+        #mux-control-cells = <0>;
+
+        mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>,
+                    <&pioA 1 GPIO_ACTIVE_HIGH>;
+    };
+
+    i2c-mux {
+        compatible = "i2c-mux";
+        mux-locked;
+        i2c-parent = <&i2c1>;
+
+        mux-controls = <&mux>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        i2c@1 {
+            reg = <1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            gpio@20 {
+                compatible = "nxp,pca9555";
+                gpio-controller;
+                #gpio-cells = <2>;
+                reg = <0x20>;
+            };
+        };
+
+        i2c@3 {
+            reg = <3>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            gpio@20 {
+                compatible = "nxp,pca9555";
+                gpio-controller;
+                #gpio-cells = <2>;
+                reg = <0x20>;
+            };
+        };
+    };
+...
diff --git a/dts/Bindings/i2c/i2c-mux-ltc4306.txt b/dts/Bindings/i2c/i2c-mux-ltc4306.txt
index 8b1e49cdce..29c4550c97 100644
--- a/dts/Bindings/i2c/i2c-mux-ltc4306.txt
+++ b/dts/Bindings/i2c/i2c-mux-ltc4306.txt
@@ -8,8 +8,8 @@ Required Properties:
 
   The following required properties are defined externally:
 
-  - Standard I2C mux properties. See i2c-mux.txt in this directory.
-  - I2C child bus nodes. See i2c-mux.txt in this directory.
+  - Standard I2C mux properties. See i2c-mux.yaml in this directory.
+  - I2C child bus nodes. See i2c-mux.yaml in this directory.
 
 Optional Properties:
 
diff --git a/dts/Bindings/i2c/i2c-mux-pca954x.txt b/dts/Bindings/i2c/i2c-mux-pca954x.txt
deleted file mode 100644
index 7abda506b8..0000000000
--- a/dts/Bindings/i2c/i2c-mux-pca954x.txt
+++ /dev/null
@@ -1,74 +0,0 @@
-* NXP PCA954x I2C bus switch
-
-The driver supports NXP PCA954x and PCA984x I2C mux/switch devices.
-
-Required Properties:
-
-  - compatible: Must contain one of the following.
-    "nxp,pca9540",
-    "nxp,pca9542",
-    "nxp,pca9543",
-    "nxp,pca9544",
-    "nxp,pca9545",
-    "nxp,pca9546", "nxp,pca9846",
-    "nxp,pca9547", "nxp,pca9847",
-    "nxp,pca9548", "nxp,pca9848",
-    "nxp,pca9849"
-
-  - reg: The I2C address of the device.
-
-  The following required properties are defined externally:
-
-  - Standard I2C mux properties. See i2c-mux.txt in this directory.
-  - I2C child bus nodes. See i2c-mux.txt in this directory.
-
-Optional Properties:
-
-  - reset-gpios: Reference to the GPIO connected to the reset input.
-  - idle-state: if present, overrides i2c-mux-idle-disconnect,
-    Please refer to Documentation/devicetree/bindings/mux/mux-controller.txt
-  - i2c-mux-idle-disconnect: Boolean; if defined, forces mux to disconnect all
-    children in idle state. This is necessary for example, if there are several
-    multiplexers on the bus and the devices behind them use same I2C addresses.
-  - interrupts: Interrupt mapping for IRQ.
-  - interrupt-controller: Marks the device node as an interrupt controller.
-  - #interrupt-cells : Should be two.
-    - first cell is the pin number
-    - second cell is used to specify flags.
-    See also Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-
-Example:
-
-	i2c-switch@74 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x74>;
-
-		interrupt-parent = <&ipic>;
-		interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-
-			eeprom@54 {
-				compatible = "atmel,24c08";
-				reg = <0x54>;
-			};
-		};
-
-		i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-
-			rtc@51 {
-				compatible = "nxp,pcf8563";
-				reg = <0x51>;
-			};
-		};
-	};
diff --git a/dts/Bindings/i2c/i2c-mux-pca954x.yaml b/dts/Bindings/i2c/i2c-mux-pca954x.yaml
new file mode 100644
index 0000000000..9f1726d035
--- /dev/null
+++ b/dts/Bindings/i2c/i2c-mux-pca954x.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-mux-pca954x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PCA954x I2C bus switch
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description:
+  The binding supports NXP PCA954x and PCA984x I2C mux/switch devices.
+
+allOf:
+  - $ref: /schemas/i2c/i2c-mux.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - nxp,pca9540
+          - nxp,pca9542
+          - nxp,pca9543
+          - nxp,pca9544
+          - nxp,pca9545
+          - nxp,pca9546
+          - nxp,pca9547
+          - nxp,pca9548
+          - nxp,pca9846
+          - nxp,pca9847
+          - nxp,pca9848
+          - nxp,pca9849
+      - items:
+          - const: nxp,pca9646
+          - const: nxp,pca9546
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupt-controller: true
+
+  reset-gpios:
+    maxItems: 1
+
+  i2c-mux-idle-disconnect:
+    type: boolean
+    description: Forces mux to disconnect all children in idle state. This is
+      necessary for example, if there are several multiplexers on the bus and
+      the devices behind them use same I2C addresses.
+
+  idle-state:
+    description: if present, overrides i2c-mux-idle-disconnect
+    $ref: /schemas/mux/mux-controller.yaml#/properties/idle-state
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        i2c-mux@74 {
+            compatible = "nxp,pca9548";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            reg = <0x74>;
+
+            interrupt-parent = <&ipic>;
+            interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+
+            i2c@2 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <2>;
+
+                eeprom@54 {
+                    compatible = "atmel,24c08";
+                    reg = <0x54>;
+                };
+            };
+
+            i2c@4 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <4>;
+
+                rtc@51 {
+                    compatible = "nxp,pcf8563";
+                    reg = <0x51>;
+                };
+            };
+        };
+    };
+...
diff --git a/dts/Bindings/i2c/i2c-mux-pinctrl.txt b/dts/Bindings/i2c/i2c-mux-pinctrl.txt
index 33119a98e1..997a287ed3 100644
--- a/dts/Bindings/i2c/i2c-mux-pinctrl.txt
+++ b/dts/Bindings/i2c/i2c-mux-pinctrl.txt
@@ -28,9 +28,9 @@ Also required are:
 * Standard pinctrl properties that specify the pin mux state for each child
   bus. See ../pinctrl/pinctrl-bindings.txt.
 
-* Standard I2C mux properties. See i2c-mux.txt in this directory.
+* Standard I2C mux properties. See i2c-mux.yaml in this directory.
 
-* I2C child bus nodes. See i2c-mux.txt in this directory.
+* I2C child bus nodes. See i2c-mux.yaml in this directory.
 
 For each named state defined in the pinctrl-names property, an I2C child bus
 will be created. I2C child bus numbers are assigned based on the index into
diff --git a/dts/Bindings/i2c/i2c-mux-reg.txt b/dts/Bindings/i2c/i2c-mux-reg.txt
index de00d7fc45..b9d9755e41 100644
--- a/dts/Bindings/i2c/i2c-mux-reg.txt
+++ b/dts/Bindings/i2c/i2c-mux-reg.txt
@@ -7,8 +7,8 @@ Required properties:
 - compatible: i2c-mux-reg
 - i2c-parent: The phandle of the I2C bus that this multiplexer's master-side
   port is connected to.
-* Standard I2C mux properties. See i2c-mux.txt in this directory.
-* I2C child bus nodes. See i2c-mux.txt in this directory.
+* Standard I2C mux properties. See i2c-mux.yaml in this directory.
+* I2C child bus nodes. See i2c-mux.yaml in this directory.
 
 Optional properties:
 - reg: this pair of <offset size> specifies the register to control the mux.
diff --git a/dts/Bindings/i2c/i2c-mux.txt b/dts/Bindings/i2c/i2c-mux.txt
deleted file mode 100644
index b38f58a1c8..0000000000
--- a/dts/Bindings/i2c/i2c-mux.txt
+++ /dev/null
@@ -1,73 +0,0 @@
-Common i2c bus multiplexer/switch properties.
-
-An i2c bus multiplexer/switch will have several child busses that are
-numbered uniquely in a device dependent manner.  The nodes for an i2c bus
-multiplexer/switch will have one child node for each child bus.
-
-Optional properties:
-- #address-cells = <1>;
-   This property is required if the i2c-mux child node does not exist.
-
-- #size-cells = <0>;
-   This property is required if the i2c-mux child node does not exist.
-
-- i2c-mux
-   For i2c multiplexers/switches that have child nodes that are a mixture
-   of both i2c child busses and other child nodes, the 'i2c-mux' subnode
-   can be used for populating the i2c child busses.  If an 'i2c-mux'
-   subnode is present, only subnodes of this will be considered as i2c
-   child busses.
-
-Required properties for the i2c-mux child node:
-- #address-cells = <1>;
-- #size-cells = <0>;
-
-Required properties for i2c child bus nodes:
-- #address-cells = <1>;
-- #size-cells = <0>;
-- reg : The sub-bus number.
-
-Optional properties for i2c child bus nodes:
-- Other properties specific to the multiplexer/switch hardware.
-- Child nodes conforming to i2c bus binding
-
-
-Example :
-
-	/*
-	   An NXP pca9548 8 channel I2C multiplexer at address 0x70
-	   with two NXP pca8574 GPIO expanders attached, one each to
-	   ports 3 and 4.
-	 */
-
-	mux@70 {
-		compatible = "nxp,pca9548";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-
-			gpio1: gpio@38 {
-				compatible = "nxp,pca8574";
-				reg = <0x38>;
-				#gpio-cells = <2>;
-				gpio-controller;
-			};
-		};
-		i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-
-			gpio2: gpio@38 {
-				compatible = "nxp,pca8574";
-				reg = <0x38>;
-				#gpio-cells = <2>;
-				gpio-controller;
-			};
-		};
-	};
diff --git a/dts/Bindings/i2c/i2c-mux.yaml b/dts/Bindings/i2c/i2c-mux.yaml
new file mode 100644
index 0000000000..24cac36037
--- /dev/null
+++ b/dts/Bindings/i2c/i2c-mux.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-mux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common i2c bus multiplexer/switch properties.
+
+maintainers:
+  - Peter Rosin <peda@axentia.se>
+
+description: |+
+  An i2c bus multiplexer/switch will have several child busses that are numbered
+  uniquely in a device dependent manner.  The nodes for an i2c bus
+  multiplexer/switch will have one child node for each child bus.
+
+  For i2c multiplexers/switches that have child nodes that are a mixture of both
+  i2c child busses and other child nodes, the 'i2c-mux' subnode can be used for
+  populating the i2c child busses.  If an 'i2c-mux' subnode is present, only
+  subnodes of this will be considered as i2c child busses.
+
+properties:
+  $nodename:
+    pattern: '^(i2c-?)?mux'
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  '^i2c@[0-9a-f]+$':
+    $ref: /schemas/i2c/i2c-controller.yaml
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        description: The mux selector sub-bus number for the child I2C bus.
+        maxItems: 1
+
+additionalProperties: true
+
+examples:
+  - |
+    /*
+     * An NXP pca9548 8 channel I2C multiplexer at address 0x70
+     * with two NXP pca8574 GPIO expanders attached, one each to
+     * ports 3 and 4.
+     */
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        i2c-mux@70 {
+            compatible = "nxp,pca9548";
+            reg = <0x70>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            i2c@3 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <3>;
+
+                gpio@20 {
+                    compatible = "nxp,pca9555";
+                    gpio-controller;
+                    #gpio-cells = <2>;
+                    reg = <0x20>;
+                };
+            };
+            i2c@4 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <4>;
+
+                gpio@20 {
+                    compatible = "nxp,pca9555";
+                    gpio-controller;
+                    #gpio-cells = <2>;
+                    reg = <0x20>;
+                };
+            };
+        };
+    };
+...
diff --git a/dts/Bindings/i2c/i2c-omap.txt b/dts/Bindings/i2c/i2c-omap.txt
deleted file mode 100644
index a425b91af4..0000000000
--- a/dts/Bindings/i2c/i2c-omap.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-I2C for OMAP platforms
-
-Required properties :
-- compatible : Must be
-	"ti,omap2420-i2c" for OMAP2420 SoCs
-	"ti,omap2430-i2c" for OMAP2430 SoCs
-	"ti,omap3-i2c" for OMAP3 SoCs
-	"ti,omap4-i2c" for OMAP4+ SoCs
-	"ti,am654-i2c", "ti,omap4-i2c" for AM654 SoCs
-	"ti,j721e-i2c", "ti,omap4-i2c" for J721E SoCs
-	"ti,am64-i2c", "ti,omap4-i2c" for AM64 SoCs
-- ti,hwmods : Must be "i2c<n>", n being the instance number (1-based)
-- #address-cells = <1>;
-- #size-cells = <0>;
-
-Recommended properties :
-- clock-frequency : Desired I2C bus clock frequency in Hz. Otherwise
-  the default 100 kHz frequency will be used.
-
-Optional properties:
-- Child nodes conforming to i2c bus binding
-
-Note: Current implementation will fetch base address, irq and dma
-from omap hwmod data base during device registration.
-Future plan is to migrate hwmod data base contents into device tree
-blob so that, all the required data will be used from device tree dts
-file.
-
-Examples :
-
-i2c1: i2c@0 {
-    compatible = "ti,omap3-i2c";
-    #address-cells = <1>;
-    #size-cells = <0>;
-    ti,hwmods = "i2c1";
-    clock-frequency = <400000>;
-};
diff --git a/dts/Bindings/i2c/i2c-pxa-pci-ce4100.txt b/dts/Bindings/i2c/i2c-pxa-pci-ce4100.txt
index 569b162485..1ff6f8487a 100644
--- a/dts/Bindings/i2c/i2c-pxa-pci-ce4100.txt
+++ b/dts/Bindings/i2c/i2c-pxa-pci-ce4100.txt
@@ -71,7 +71,7 @@ This is an example which is used on FalconFalls:
 			/* This I2C controller has one gpio controller */
 			gpio@26 {
 				#gpio-cells = <2>;
-				compatible = "ti,pcf8575";
+				compatible = "nxp,pcf8575";
 				reg = <0x26>;
 				gpio-controller;
 			};
@@ -85,7 +85,7 @@ This is an example which is used on FalconFalls:
 
 			gpio@26 {
 				#gpio-cells = <2>;
-				compatible = "ti,pcf8575";
+				compatible = "nxp,pcf8575";
 				reg = <0x26>;
 				gpio-controller;
 			};
diff --git a/dts/Bindings/i2c/i2c-qcom-cci.txt b/dts/Bindings/i2c/i2c-qcom-cci.txt
index c6668b7c66..7b9fc0c22e 100644
--- a/dts/Bindings/i2c/i2c-qcom-cci.txt
+++ b/dts/Bindings/i2c/i2c-qcom-cci.txt
@@ -9,6 +9,7 @@ PROPERTIES:
 		"qcom,msm8916-cci"
 		"qcom,msm8996-cci"
 		"qcom,sdm845-cci"
+		"qcom,sm8250-cci"
 
 - reg
 	Usage: required
@@ -41,8 +42,8 @@ PROPERTIES:
 
 SUBNODES:
 
-The CCI provides I2C masters for one (msm8916) or two i2c busses (msm8996 and
-sdm845), described as subdevices named "i2c-bus@0" and "i2c-bus@1".
+The CCI provides I2C masters for one (msm8916) or two i2c busses (msm8996,
+sdm845 and sm8250), described as subdevices named "i2c-bus@0" and "i2c-bus@1".
 
 PROPERTIES:
 
diff --git a/dts/Bindings/i2c/i2c-rk3x.yaml b/dts/Bindings/i2c/i2c-rk3x.yaml
index 7f254d7955..5339dd4fc3 100644
--- a/dts/Bindings/i2c/i2c-rk3x.yaml
+++ b/dts/Bindings/i2c/i2c-rk3x.yaml
@@ -36,6 +36,7 @@ properties:
               - rockchip,px30-i2c
               - rockchip,rk3308-i2c
               - rockchip,rk3328-i2c
+              - rockchip,rk3568-i2c
           - const: rockchip,rk3399-i2c
 
   reg:
diff --git a/dts/Bindings/i2c/i2c.txt b/dts/Bindings/i2c/i2c.txt
index df41f72afc..b864916e08 100644
--- a/dts/Bindings/i2c/i2c.txt
+++ b/dts/Bindings/i2c/i2c.txt
@@ -89,8 +89,11 @@ wants to support one of the below features, it should adapt these bindings.
 
 - smbus
 	states that additional SMBus restrictions and features apply to this bus.
-	Examples of features are SMBusHostNotify and SMBusAlert. Examples of
-	restrictions are more reserved addresses and timeout definitions.
+	An example of feature is SMBusHostNotify. Examples of restrictions are
+	more reserved addresses and timeout definitions.
+
+- smbus-alert
+	states that the optional SMBus-Alert feature apply to this bus.
 
 Required properties (per child device)
 --------------------------------------
diff --git a/dts/Bindings/i2c/marvell,mv64xxx-i2c.yaml b/dts/Bindings/i2c/marvell,mv64xxx-i2c.yaml
index eb72dd571d..f771c09aab 100644
--- a/dts/Bindings/i2c/marvell,mv64xxx-i2c.yaml
+++ b/dts/Bindings/i2c/marvell,mv64xxx-i2c.yaml
@@ -43,14 +43,12 @@ properties:
 
   clocks:
     minItems: 1
-    maxItems: 2
     items:
       - description: Reference clock for the I2C bus
       - description: Bus clock (Only for Armada 7K/8K)
 
   clock-names:
     minItems: 1
-    maxItems: 2
     items:
       - const: core
       - const: reg
diff --git a/dts/Bindings/i2c/mellanox,i2c-mlxbf.yaml b/dts/Bindings/i2c/mellanox,i2c-mlxbf.yaml
index d2b401d062..93198d5d43 100644
--- a/dts/Bindings/i2c/mellanox,i2c-mlxbf.yaml
+++ b/dts/Bindings/i2c/mellanox,i2c-mlxbf.yaml
@@ -20,7 +20,6 @@ properties:
 
   reg:
     minItems: 3
-    maxItems: 4
     items:
       - description: Smbus block registers
       - description: Cause master registers
diff --git a/dts/Bindings/i2c/renesas,i2c.txt b/dts/Bindings/i2c/renesas,i2c.txt
deleted file mode 100644
index 5762d2d1ab..0000000000
--- a/dts/Bindings/i2c/renesas,i2c.txt
+++ /dev/null
@@ -1,67 +0,0 @@
-I2C for R-Car platforms
-
-Required properties:
-- compatible:
-	"renesas,i2c-r8a7742" if the device is a part of a R8A7742 SoC.
-	"renesas,i2c-r8a7743" if the device is a part of a R8A7743 SoC.
-	"renesas,i2c-r8a7744" if the device is a part of a R8A7744 SoC.
-	"renesas,i2c-r8a7745" if the device is a part of a R8A7745 SoC.
-	"renesas,i2c-r8a77470" if the device is a part of a R8A77470 SoC.
-	"renesas,i2c-r8a774a1" if the device is a part of a R8A774A1 SoC.
-	"renesas,i2c-r8a774b1" if the device is a part of a R8A774B1 SoC.
-	"renesas,i2c-r8a774c0" if the device is a part of a R8A774C0 SoC.
-	"renesas,i2c-r8a774e1" if the device is a part of a R8A774E1 SoC.
-	"renesas,i2c-r8a7778" if the device is a part of a R8A7778 SoC.
-	"renesas,i2c-r8a7779" if the device is a part of a R8A7779 SoC.
-	"renesas,i2c-r8a7790" if the device is a part of a R8A7790 SoC.
-	"renesas,i2c-r8a7791" if the device is a part of a R8A7791 SoC.
-	"renesas,i2c-r8a7792" if the device is a part of a R8A7792 SoC.
-	"renesas,i2c-r8a7793" if the device is a part of a R8A7793 SoC.
-	"renesas,i2c-r8a7794" if the device is a part of a R8A7794 SoC.
-	"renesas,i2c-r8a7795" if the device is a part of a R8A7795 SoC.
-	"renesas,i2c-r8a7796" if the device is a part of a R8A77960 SoC.
-	"renesas,i2c-r8a77961" if the device is a part of a R8A77961 SoC.
-	"renesas,i2c-r8a77965" if the device is a part of a R8A77965 SoC.
-	"renesas,i2c-r8a77970" if the device is a part of a R8A77970 SoC.
-	"renesas,i2c-r8a77980" if the device is a part of a R8A77980 SoC.
-	"renesas,i2c-r8a77990" if the device is a part of a R8A77990 SoC.
-	"renesas,i2c-r8a77995" if the device is a part of a R8A77995 SoC.
-	"renesas,i2c-r8a779a0" if the device is a part of a R8A779A0 SoC.
-	"renesas,rcar-gen1-i2c" for a generic R-Car Gen1 compatible device.
-	"renesas,rcar-gen2-i2c" for a generic R-Car Gen2 or RZ/G1 compatible
-				device.
-	"renesas,rcar-gen3-i2c" for a generic R-Car Gen3 or RZ/G2 compatible
-				device.
-	"renesas,i2c-rcar" (deprecated)
-
-	When compatible with the generic version, nodes must list the
-	SoC-specific version corresponding to the platform first followed
-	by the generic version.
-
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- interrupts: interrupt specifier.
-
-Optional properties:
-- clock-frequency: desired I2C bus clock frequency in Hz. The absence of this
-  property indicates the default frequency 100 kHz.
-- clocks: clock specifier.
-- dmas: Must contain a list of two references to DMA specifiers, one for
-  transmission, and one for reception.
-- dma-names: Must contain a list of two DMA names, "tx" and "rx".
-
-- i2c-scl-falling-time-ns: see i2c.txt
-- i2c-scl-internal-delay-ns: see i2c.txt
-- i2c-scl-rising-time-ns: see i2c.txt
-
-Examples :
-
-i2c0: i2c@e6508000 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c";
-	reg = <0 0xe6508000 0 0x40>;
-	interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&mstp9_clks R8A7791_CLK_I2C0>;
-	clock-frequency = <400000>;
-};
diff --git a/dts/Bindings/i2c/renesas,iic-emev2.txt b/dts/Bindings/i2c/renesas,iic-emev2.txt
deleted file mode 100644
index 5ed1ea1c7e..0000000000
--- a/dts/Bindings/i2c/renesas,iic-emev2.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Device tree configuration for Renesas EMEV2 IIC controller
-
-Required properties:
-- compatible      : "renesas,iic-emev2"
-- reg             : address start and address range size of device
-- interrupts      : specifier for the IIC controller interrupt
-- clocks          : phandle to the IP core SCLK
-- clock-names     : must be "sclk"
-- #address-cells  : should be <1>
-- #size-cells     : should be <0>
-
-Example:
-
-	iic0: i2c@e0070000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,iic-emev2";
-		reg = <0xe0070000 0x28>;
-		interrupts = <0 32 IRQ_TYPE_EDGE_RISING>;
-		clocks = <&iic0_sclk>;
-		clock-names = "sclk";
-	};
diff --git a/dts/Bindings/i2c/renesas,iic-emev2.yaml b/dts/Bindings/i2c/renesas,iic-emev2.yaml
new file mode 100644
index 0000000000..17c1102562
--- /dev/null
+++ b/dts/Bindings/i2c/renesas,iic-emev2.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/renesas,iic-emev2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas EMMA Mobile EV2 IIC Interface
+
+maintainers:
+  - Wolfram Sang <wsa+renesas@sang-engineering.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: renesas,iic-emev2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: sclk
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - '#address-cells'
+  - '#size-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    iic0: i2c@e0070000 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            compatible = "renesas,iic-emev2";
+            reg = <0xe0070000 0x28>;
+            interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
+            clocks = <&iic0_sclk>;
+            clock-names = "sclk";
+    };
diff --git a/dts/Bindings/i2c/renesas,iic.txt b/dts/Bindings/i2c/renesas,iic.txt
deleted file mode 100644
index 93d412832e..0000000000
--- a/dts/Bindings/i2c/renesas,iic.txt
+++ /dev/null
@@ -1,72 +0,0 @@
-Device tree configuration for Renesas IIC (sh_mobile) driver
-
-Required properties:
-- compatible      :
-			- "renesas,iic-r8a73a4" (R-Mobile APE6)
-			- "renesas,iic-r8a7740" (R-Mobile A1)
-			- "renesas,iic-r8a7742" (RZ/G1H)
-			- "renesas,iic-r8a7743" (RZ/G1M)
-			- "renesas,iic-r8a7744" (RZ/G1N)
-			- "renesas,iic-r8a7745" (RZ/G1E)
-			- "renesas,iic-r8a774a1" (RZ/G2M)
-			- "renesas,iic-r8a774b1" (RZ/G2N)
-			- "renesas,iic-r8a774c0" (RZ/G2E)
-			- "renesas,iic-r8a774e1" (RZ/G2H)
-			- "renesas,iic-r8a7790" (R-Car H2)
-			- "renesas,iic-r8a7791" (R-Car M2-W)
-			- "renesas,iic-r8a7792" (R-Car V2H)
-			- "renesas,iic-r8a7793" (R-Car M2-N)
-			- "renesas,iic-r8a7794" (R-Car E2)
-			- "renesas,iic-r8a7795" (R-Car H3)
-			- "renesas,iic-r8a7796" (R-Car M3-W)
-			- "renesas,iic-r8a77961" (R-Car M3-W+)
-			- "renesas,iic-r8a77965" (R-Car M3-N)
-			- "renesas,iic-r8a77990" (R-Car E3)
-			- "renesas,iic-sh73a0" (SH-Mobile AG5)
-			- "renesas,rcar-gen2-iic" (generic R-Car Gen2 or RZ/G1
-							compatible device)
-			- "renesas,rcar-gen3-iic" (generic R-Car Gen3 or RZ/G2
-							compatible device)
-			- "renesas,rmobile-iic" (generic device)
-
-			When compatible with a generic R-Car version, nodes
-			must list the SoC-specific version corresponding to
-			the platform first followed by the generic R-Car
-			version.
-
-			When compatible with "renesas,rmobile-iic" it should
-			be the last compatibility string listed.
-
-			The r8a77990 (R-Car E3) and r8a774c0 (RZ/G2E)
-			controllers are not considered compatible with
-			"renesas,rcar-gen3-iic" or "renesas,rmobile-iic"
-			due to the absence of automatic transmission registers.
-
-- reg             : address start and address range size of device
-- interrupts      : interrupt of device
-- clocks          : clock for device
-- #address-cells  : should be <1>
-- #size-cells     : should be <0>
-
-Optional properties:
-- clock-frequency : frequency of bus clock in Hz. Default 100kHz if unset.
-- dmas            : Must contain a list of two references to DMA
-		    specifiers, one for transmission, and one for
-		    reception.
-- dma-names       : Must contain a list of two DMA names, "tx" and "rx".
-
-
-Pinctrl properties might be needed, too. See there.
-
-Example:
-
-	iic0: i2c@e6500000 {
-		compatible = "renesas,iic-r8a7790", "renesas,rcar-gen2-iic",
-			     "renesas,rmobile-iic";
-		reg = <0 0xe6500000 0 0x425>;
-		interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7790_CLK_IIC0>;
-		clock-frequency = <400000>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
diff --git a/dts/Bindings/i2c/renesas,rcar-i2c.yaml b/dts/Bindings/i2c/renesas,rcar-i2c.yaml
new file mode 100644
index 0000000000..052aad44e7
--- /dev/null
+++ b/dts/Bindings/i2c/renesas,rcar-i2c.yaml
@@ -0,0 +1,158 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/renesas,rcar-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car I2C Controller
+
+maintainers:
+  - Wolfram Sang <wsa+renesas@sang-engineering.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,i2c-r8a7778      # R-Car M1A
+              - renesas,i2c-r8a7779      # R-Car H1
+          - const: renesas,rcar-gen1-i2c # R-Car Gen1
+
+      - items:
+          - enum:
+              - renesas,i2c-r8a7742      # RZ/G1H
+              - renesas,i2c-r8a7743      # RZ/G1M
+              - renesas,i2c-r8a7744      # RZ/G1N
+              - renesas,i2c-r8a7745      # RZ/G1E
+              - renesas,i2c-r8a77470     # RZ/G1C
+              - renesas,i2c-r8a7790      # R-Car H2
+              - renesas,i2c-r8a7791      # R-Car M2-W
+              - renesas,i2c-r8a7792      # R-Car V2H
+              - renesas,i2c-r8a7793      # R-Car M2-N
+              - renesas,i2c-r8a7794      # R-Car E2
+          - const: renesas,rcar-gen2-i2c # R-Car Gen2 and RZ/G1
+
+      - items:
+          - enum:
+              - renesas,i2c-r8a774a1     # RZ/G2M
+              - renesas,i2c-r8a774b1     # RZ/G2N
+              - renesas,i2c-r8a774c0     # RZ/G2E
+              - renesas,i2c-r8a774e1     # RZ/G2H
+              - renesas,i2c-r8a7795      # R-Car H3
+              - renesas,i2c-r8a7796      # R-Car M3-W
+              - renesas,i2c-r8a77961     # R-Car M3-W+
+              - renesas,i2c-r8a77965     # R-Car M3-N
+              - renesas,i2c-r8a77970     # R-Car V3M
+              - renesas,i2c-r8a77980     # R-Car V3H
+              - renesas,i2c-r8a77990     # R-Car E3
+              - renesas,i2c-r8a77995     # R-Car D3
+              - renesas,i2c-r8a779a0     # R-Car V3U
+          - const: renesas,rcar-gen3-i2c # R-Car Gen3 and RZ/G2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-frequency:
+    description:
+      Desired I2C bus clock frequency in Hz. The absence of this property
+      indicates the default frequency 100 kHz.
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    minItems: 2
+    maxItems: 4
+    description:
+      Must contain a list of pairs of references to DMA specifiers, one for
+      transmission, and one for reception.
+
+  dma-names:
+    minItems: 2
+    maxItems: 4
+    items:
+      enum:
+        - tx
+        - rx
+
+  i2c-scl-falling-time-ns:
+    default: 35
+    description:
+      Number of nanoseconds the SCL signal takes to fall; t(f) in the I2C
+      specification.
+
+  i2c-scl-internal-delay-ns:
+    default: 50
+    description:
+      Number of nanoseconds the IP core additionally needs to setup SCL.
+
+  i2c-scl-rising-time-ns:
+    default: 200
+    description:
+      Number of nanoseconds the SCL signal takes to rise; t(r) in the I2C
+      specification.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - power-domains
+  - '#address-cells'
+  - '#size-cells'
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,rcar-gen1-i2c
+              - renesas,rcar-gen2-i2c
+    then:
+      properties:
+        dmas: false
+        dma-names: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,rcar-gen2-i2c
+              - renesas,rcar-gen3-i2c
+    then:
+      required:
+        - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7791-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7791-sysc.h>
+
+    i2c0: i2c@e6508000 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c";
+            reg = <0xe6508000 0x40>;
+            interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+            clock-frequency = <400000>;
+            clocks = <&cpg CPG_MOD 931>;
+            power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+            resets = <&cpg 931>;
+            i2c-scl-internal-delay-ns = <6>;
+    };
diff --git a/dts/Bindings/i2c/renesas,riic.txt b/dts/Bindings/i2c/renesas,riic.txt
deleted file mode 100644
index e26fe3ad86..0000000000
--- a/dts/Bindings/i2c/renesas,riic.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-Device tree configuration for Renesas RIIC driver
-
-Required properties:
-- compatible      :
-	"renesas,riic-r7s72100" if the device is a part of a R7S72100 SoC.
-	"renesas,riic-r7s9210" if the device is a part of a R7S9210 SoC.
-	"renesas,riic-rz" for a generic RZ/A compatible device.
-- reg             : address start and address range size of device
-- interrupts      : 8 interrupts (TEI, RI, TI, SPI, STI, NAKI, ALI, TMOI)
-- clock-frequency : frequency of bus clock in Hz
-- #address-cells  : should be <1>
-- #size-cells     : should be <0>
-
-Pinctrl properties might be needed, too. See there.
-
-Example:
-
-	i2c0: i2c@fcfee000 {
-		compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
-		reg = <0xfcfee000 0x44>;
-		interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 158 IRQ_TYPE_EDGE_RISING>,
-			     <0 159 IRQ_TYPE_EDGE_RISING>,
-			     <0 160 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 161 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 162 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 163 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 164 IRQ_TYPE_LEVEL_HIGH>;
-		clock-frequency = <100000>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
diff --git a/dts/Bindings/i2c/renesas,riic.yaml b/dts/Bindings/i2c/renesas,riic.yaml
new file mode 100644
index 0000000000..52d92ec7ec
--- /dev/null
+++ b/dts/Bindings/i2c/renesas,riic.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/renesas,riic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/A and RZ/G2L I2C Bus Interface (RIIC)
+
+maintainers:
+  - Chris Brandt <chris.brandt@renesas.com>
+  - Wolfram Sang <wsa+renesas@sang-engineering.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,riic-r7s72100   # RZ/A1H
+          - renesas,riic-r7s9210    # RZ/A2M
+          - renesas,riic-r9a07g044  # RZ/G2{L,LC}
+      - const: renesas,riic-rz      # RZ/A or RZ/G2L
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Transmit End Interrupt (TEI)
+      - description: Receive Data Full Interrupt (RI)
+      - description: Transmit Data Empty Interrupt (TI)
+      - description: Stop Condition Detection Interrupt (SPI)
+      - description: Start Condition Detection Interrupt (STI)
+      - description: NACK Reception Interrupt (NAKI)
+      - description: Arbitration-Lost Interrupt (ALI)
+      - description: Timeout Interrupt (TMOI)
+
+  clock-frequency:
+    description:
+      Desired I2C bus clock frequency in Hz. The absence of this property
+      indicates the default frequency 100 kHz.
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-frequency
+  - power-domains
+  - '#address-cells'
+  - '#size-cells'
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - renesas,riic-r9a07g044
+then:
+  required:
+    - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r7s72100-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2c0: i2c@fcfee000 {
+            compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
+            reg = <0xfcfee000 0x44>;
+            interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 159 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&mstp9_clks R7S72100_CLK_I2C0>;
+            clock-frequency = <100000>;
+            power-domains = <&cpg_clocks>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+    };
diff --git a/dts/Bindings/i2c/renesas,rmobile-iic.yaml b/dts/Bindings/i2c/renesas,rmobile-iic.yaml
new file mode 100644
index 0000000000..04e4ffd80b
--- /dev/null
+++ b/dts/Bindings/i2c/renesas,rmobile-iic.yaml
@@ -0,0 +1,149 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/renesas,rmobile-iic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Mobile I2C Bus Interface (IIC)
+
+maintainers:
+  - Wolfram Sang <wsa+renesas@sang-engineering.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,iic-r8a73a4      # R-Mobile APE6
+              - renesas,iic-r8a7740      # R-Mobile A1
+              - renesas,iic-sh73a0       # SH-Mobile AG5
+          - const: renesas,rmobile-iic   # Generic
+
+      - items:
+          - enum:
+              - renesas,iic-r8a7742      # RZ/G1H
+              - renesas,iic-r8a7743      # RZ/G1M
+              - renesas,iic-r8a7744      # RZ/G1N
+              - renesas,iic-r8a7745      # RZ/G1E
+              - renesas,iic-r8a7790      # R-Car H2
+              - renesas,iic-r8a7791      # R-Car M2-W
+              - renesas,iic-r8a7792      # R-Car V2H
+              - renesas,iic-r8a7793      # R-Car M2-N
+              - renesas,iic-r8a7794      # R-Car E2
+          - const: renesas,rcar-gen2-iic # R-Car Gen2 and RZ/G1
+          - const: renesas,rmobile-iic   # Generic
+
+      - items:
+          - enum:
+              - renesas,iic-r8a774a1     # RZ/G2M
+              - renesas,iic-r8a774b1     # RZ/G2N
+              - renesas,iic-r8a774c0     # RZ/G2E
+              - renesas,iic-r8a774e1     # RZ/G2H
+              - renesas,iic-r8a7795      # R-Car H3
+              - renesas,iic-r8a7796      # R-Car M3-W
+              - renesas,iic-r8a77961     # R-Car M3-W+
+              - renesas,iic-r8a77965     # R-Car M3-N
+              - renesas,iic-r8a77990     # R-Car E3
+          - const: renesas,rcar-gen3-iic # R-Car Gen3 and RZ/G2
+          - const: renesas,rmobile-iic   # Generic
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+
+  clock-frequency:
+    description:
+      Desired I2C bus clock frequency in Hz. The absence of this property
+      indicates the default frequency 100 kHz.
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    minItems: 2
+    maxItems: 4
+    description:
+      Must contain a list of pairs of references to DMA specifiers, one for
+      transmission, and one for reception.
+
+  dma-names:
+    minItems: 2
+    maxItems: 4
+    items:
+      enum:
+        - tx
+        - rx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - power-domains
+  - '#address-cells'
+  - '#size-cells'
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,iic-r8a7740
+              - renesas,iic-sh73a0
+    then:
+      properties:
+        interrupts:
+          items:
+            - description: Arbitration Lost Interrupt (ALI)
+            - description: Non-acknowledge Detection Interrupt (TACKI)
+            - description: Wait Interrupt (WAITI)
+            - description: Data Transmit Enable interrupt (DTEI)
+    else:
+      properties:
+        interrupts:
+          items:
+            - description: Single combined interrupt
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,rcar-gen2-iic
+              - renesas,rcar-gen3-iic
+    then:
+      required:
+        - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7790-sysc.h>
+
+    iic0: i2c@e6500000 {
+            compatible = "renesas,iic-r8a7790", "renesas,rcar-gen2-iic",
+                         "renesas,rmobile-iic";
+            reg = <0xe6500000 0x425>;
+            interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 318>;
+            clock-frequency = <400000>;
+            dmas = <&dmac0 0x61>, <&dmac0 0x62>, <&dmac1 0x61>, <&dmac1 0x62>;
+            dma-names = "tx", "rx", "tx", "rx";
+            power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+            resets = <&cpg 318>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+    };
diff --git a/dts/Bindings/i2c/ti,omap4-i2c.yaml b/dts/Bindings/i2c/ti,omap4-i2c.yaml
new file mode 100644
index 0000000000..ff165ad1be
--- /dev/null
+++ b/dts/Bindings/i2c/ti,omap4-i2c.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/ti,omap4-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bindings for I2C controllers on TI's OMAP and K3 SoCs
+
+maintainers:
+  - Vignesh Raghavendra <vigneshr@ti.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - ti,omap2420-i2c
+          - ti,omap2430-i2c
+          - ti,omap3-i2c
+          - ti,omap4-i2c
+      - items:
+          - enum:
+              - ti,am4372-i2c
+              - ti,am64-i2c
+              - ti,am654-i2c
+              - ti,j721e-i2c
+          - const: ti,omap4-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: fck
+
+  clock-frequency: true
+
+  power-domains: true
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  ti,hwmods:
+    description:
+      Must be "i2c<n>", n being the instance number (1-based).
+      This property is applicable only on legacy platforms mainly omap2/3
+      and ti81xx and should not be used on other platforms.
+    $ref: /schemas/types.yaml#/definitions/string
+    deprecated: true
+
+# subnode's properties
+patternProperties:
+  "@[0-9a-f]+$":
+    type: object
+    description:
+      Flash device uses the below defined properties in the subnode.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+if:
+  properties:
+    compatible:
+      oneOf:
+        - const: ti,omap2420-i2c
+        - const: ti,omap2430-i2c
+        - const: ti,omap3-i2c
+        - const: ti,omap4-i2c
+
+then:
+  properties:
+    ti,hwmods:
+      items:
+        - pattern: "^i2c([1-9])$"
+
+else:
+  properties:
+    ti,hwmods: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    main_i2c0: i2c@2000000 {
+            compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+            reg = <0x2000000 0x100>;
+            interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+         };