dts: update to v5.10-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

23 files changed, 1249 insertions, 635 deletions

diff --git a/dts/Bindings/pinctrl/actions,s500-pinctrl.yaml b/dts/Bindings/pinctrl/actions,s500-pinctrl.yaml
new file mode 100644
index 0000000000..33391d30c0
--- /dev/null
+++ b/dts/Bindings/pinctrl/actions,s500-pinctrl.yaml
@@ -0,0 +1,240 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/actions,s500-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Actions Semi S500 SoC pinmux & GPIO controller
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+  - Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
+
+description: |
+  Pinmux & GPIO controller manages pin multiplexing & configuration including
+  GPIO function selection & GPIO attributes configuration. Please refer to
+  pinctrl-bindings.txt in this directory for common binding part and usage.
+
+properties:
+  compatible:
+    const: actions,s500-pinctrl
+
+  reg:
+    items:
+      - description: GPIO Output + GPIO Input + GPIO Data
+      - description: Multiplexing Control
+      - description: PAD Pull Control + PAD Schmitt Trigger Enable + PAD Control
+      - description: PAD Drive Capacity Select
+    minItems: 1
+    maxItems: 4
+
+  clocks:
+    maxItems: 1
+
+  gpio-controller: true
+
+  gpio-ranges:
+    maxItems: 1
+
+  '#gpio-cells':
+    description:
+      Specifies the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    description:
+      Specifies the pin number and flags, as defined in
+      include/dt-bindings/interrupt-controller/irq.h
+    const: 2
+
+  interrupts:
+    description:
+      One interrupt per each of the 5 GPIO ports supported by the controller,
+      sorted by port number ascending order.
+    minItems: 5
+    maxItems: 5
+
+patternProperties:
+  '-pins$':
+    type: object
+    patternProperties:
+      '^(.*-)?pinmux$':
+        type: object
+        description:
+          Pinctrl node's client devices specify pin muxes using subnodes,
+          which in turn use the standard properties below.
+        $ref: pinmux-node.yaml#
+
+        properties:
+          groups:
+            description:
+              List of gpio pin groups affected by the functions specified in
+              this subnode.
+            items:
+              oneOf:
+                - enum: [lcd0_d18_mfp, rmii_crs_dv_mfp, rmii_txd0_mfp,
+                    rmii_txd1_mfp, rmii_txen_mfp, rmii_rxen_mfp, rmii_rxd1_mfp,
+                    rmii_rxd0_mfp, rmii_ref_clk_mfp, i2s_d0_mfp, i2s_pcm1_mfp,
+                    i2s0_pcm0_mfp, i2s1_pcm0_mfp, i2s_d1_mfp, ks_in2_mfp,
+                    ks_in1_mfp, ks_in0_mfp, ks_in3_mfp, ks_out0_mfp,
+                    ks_out1_mfp, ks_out2_mfp, lvds_o_pn_mfp, dsi_dn0_mfp,
+                    dsi_dp2_mfp, lcd0_d17_mfp, dsi_dp3_mfp, dsi_dn3_mfp,
+                    dsi_dp0_mfp, lvds_ee_pn_mfp, spi0_i2c_pcm_mfp,
+                    spi0_i2s_pcm_mfp, dsi_dnp1_cp_mfp, lvds_e_pn_mfp,
+                    dsi_dn2_mfp, uart2_rtsb_mfp, uart2_ctsb_mfp, uart3_rtsb_mfp,
+                    uart3_ctsb_mfp, sd0_d0_mfp, sd0_d1_mfp, sd0_d2_d3_mfp,
+                    sd1_d0_d3_mfp, sd0_cmd_mfp, sd0_clk_mfp, sd1_cmd_mfp,
+                    uart0_rx_mfp, clko_25m_mfp, csi_cn_cp_mfp, sens0_ckout_mfp,
+                    uart0_tx_mfp, i2c0_mfp, csi_dn_dp_mfp, sen0_pclk_mfp,
+                    pcm1_in_mfp, pcm1_clk_mfp, pcm1_sync_mfp, pcm1_out_mfp,
+                    dnand_data_wr_mfp, dnand_acle_ce0_mfp, nand_ceb2_mfp,
+                    nand_ceb3_mfp]
+            minItems: 1
+            maxItems: 32
+
+          function:
+            description:
+              Specify the alternative function to be configured for the
+              given gpio pin groups.
+            enum: [nor, eth_rmii, eth_smii, spi0, spi1, spi2, spi3, sens0,
+              sens1, uart0, uart1, uart2, uart3, uart4, uart5, uart6, i2s0,
+              i2s1, pcm1, pcm0, ks, jtag, pwm0, pwm1, pwm2, pwm3, pwm4, pwm5,
+              p0, sd0, sd1, sd2, i2c0, i2c1, i2c3, dsi, lvds, usb30, clko_25m,
+              mipi_csi, nand, spdif, ts, lcd0]
+
+        required:
+          - groups
+          - function
+
+        additionalProperties: false
+
+      '^(.*-)?pinconf$':
+        type: object
+        description:
+          Pinctrl node's client devices specify pin configurations using
+          subnodes, which in turn use the standard properties below.
+        $ref: pincfg-node.yaml#
+
+        properties:
+          groups:
+            description:
+              List of gpio pin groups affected by the drive-strength property
+              specified in this subnode.
+            items:
+              oneOf:
+                - enum: [sirq_drv, rmii_txd01_txen_drv, rmii_rxer_drv,
+                    rmii_crs_drv, rmii_rxd10_drv, rmii_ref_clk_drv,
+                    smi_mdc_mdio_drv, i2s_d0_drv, i2s_bclk0_drv, i2s3_drv,
+                    i2s13_drv, pcm1_drv, ks_in_drv, ks_out_drv, lvds_all_drv,
+                    lcd_dsi_drv, dsi_drv, sd0_d0_d3_drv, sd1_d0_d3_drv,
+                    sd0_cmd_drv, sd0_clk_drv, sd1_cmd_drv, sd1_clk_drv,
+                    spi0_all_drv, uart0_rx_drv, uart0_tx_drv, uart2_all_drv,
+                    i2c0_all_drv, i2c12_all_drv, sens0_pclk_drv,
+                    sens0_ckout_drv, uart3_all_drv]
+            minItems: 1
+            maxItems: 32
+
+          pins:
+            description:
+              List of gpio pins affected by the bias-pull-* and
+              input-schmitt-* properties specified in this subnode.
+            items:
+              oneOf:
+                - enum: [dnand_dqs, dnand_dqsn, eth_txd0, eth_txd1, eth_txen,
+                    eth_rxer, eth_crs_dv, eth_rxd1, eth_rxd0, eth_ref_clk,
+                    eth_mdc, eth_mdio, sirq0, sirq1, sirq2, i2s_d0, i2s_bclk0,
+                    i2s_lrclk0, i2s_mclk0, i2s_d1, i2s_bclk1, i2s_lrclk1,
+                    i2s_mclk1, ks_in0, ks_in1, ks_in2, ks_in3, ks_out0, ks_out1,
+                    ks_out2, lvds_oep, lvds_oen, lvds_odp, lvds_odn, lvds_ocp,
+                    lvds_ocn, lvds_obp, lvds_obn, lvds_oap, lvds_oan, lvds_eep,
+                    lvds_een, lvds_edp, lvds_edn, lvds_ecp, lvds_ecn, lvds_ebp,
+                    lvds_ebn, lvds_eap, lvds_ean, lcd0_d18, lcd0_d17, dsi_dp3,
+                    dsi_dn3, dsi_dp1, dsi_dn1, dsi_cp, dsi_cn, dsi_dp0, dsi_dn0,
+                    dsi_dp2, dsi_dn2, sd0_d0, sd0_d1, sd0_d2, sd0_d3, sd1_d0,
+                    sd1_d1, sd1_d2, sd1_d3, sd0_cmd, sd0_clk, sd1_cmd, sd1_clk,
+                    spi0_sclk, spi0_ss, spi0_miso, spi0_mosi, uart0_rx,
+                    uart0_tx, i2c0_sclk, i2c0_sdata, sensor0_pclk,
+                    sensor0_ckout, dnand_ale, dnand_cle, dnand_ceb0, dnand_ceb1,
+                    dnand_ceb2, dnand_ceb3, uart2_rx, uart2_tx, uart2_rtsb,
+                    uart2_ctsb, uart3_rx, uart3_tx, uart3_rtsb, uart3_ctsb,
+                    pcm1_in, pcm1_clk, pcm1_sync, pcm1_out, i2c1_sclk,
+                    i2c1_sdata, i2c2_sclk, i2c2_sdata, csi_dn0, csi_dp0,
+                    csi_dn1, csi_dp1, csi_dn2, csi_dp2, csi_dn3, csi_dp3,
+                    csi_cn, csi_cp, dnand_d0, dnand_d1, dnand_d2, dnand_d3,
+                    dnand_d4, dnand_d5, dnand_d6, dnand_d7, dnand_rb, dnand_rdb,
+                    dnand_rdbn, dnand_wrb, porb, clko_25m, bsel, pkg0, pkg1,
+                    pkg2, pkg3]
+            minItems: 1
+            maxItems: 64
+
+          bias-pull-up: true
+          bias-pull-down: true
+
+          drive-strength:
+            description:
+              Selects the drive strength for the specified pins, in mA.
+            enum: [2, 4, 8, 12]
+
+          input-schmitt-enable: true
+          input-schmitt-disable: true
+
+        additionalProperties: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - gpio-controller
+  - gpio-ranges
+  - '#gpio-cells'
+  - interrupt-controller
+  - '#interrupt-cells'
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pinctrl: pinctrl@b01b0000 {
+        compatible = "actions,s500-pinctrl";
+        reg = <0xb01b0000 0x40>, <0xb01b0040 0x10>,
+              <0xb01b0060 0x18>, <0xb01b0080 0xc>;
+        clocks = <&cmu 55>;
+        gpio-controller;
+        gpio-ranges = <&pinctrl 0 0 132>;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+
+        mmc0_pins: mmc0-pins {
+            pinmux {
+                groups = "sd0_d0_mfp", "sd0_d1_mfp", "sd0_d2_d3_mfp",
+                         "sd0_cmd_mfp", "sd0_clk_mfp";
+                function = "sd0";
+            };
+
+            drv-pinconf {
+                groups = "sd0_d0_d3_drv", "sd0_cmd_drv", "sd0_clk_drv";
+                drive-strength = <8>;
+            };
+
+            bias-pinconf {
+                pins = "sd0_d0", "sd0_d1", "sd0_d2",
+                       "sd0_d3", "sd0_cmd";
+                bias-pull-up;
+            };
+        };
+    };
+
+...
diff --git a/dts/Bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml b/dts/Bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
index 7556be6e27..5240487dfe 100644
--- a/dts/Bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
@@ -48,6 +48,8 @@ properties:
       - allwinner,sun9i-a80-r-pinctrl
       - allwinner,sun50i-a64-pinctrl
       - allwinner,sun50i-a64-r-pinctrl
+      - allwinner,sun50i-a100-pinctrl
+      - allwinner,sun50i-a100-r-pinctrl
       - allwinner,sun50i-h5-pinctrl
       - allwinner,sun50i-h6-pinctrl
       - allwinner,sun50i-h6-r-pinctrl
@@ -59,7 +61,7 @@ properties:
 
   interrupts:
     minItems: 1
-    maxItems: 5
+    maxItems: 7
     description:
       One interrupt per external interrupt bank supported on the
       controller, sorted by bank number ascending order.
@@ -147,6 +149,18 @@ allOf:
       properties:
         compatible:
           enum:
+            - allwinner,sun50i-a100-pinctrl
+
+    then:
+      properties:
+        interrupts:
+          minItems: 7
+          maxItems: 7
+
+  - if:
+      properties:
+        compatible:
+          enum:
             - allwinner,sun9i-a80-pinctrl
 
     then:
@@ -155,62 +169,75 @@ allOf:
           minItems: 5
           maxItems: 5
 
-    else:
-      if:
-        properties:
-          compatible:
-            enum:
-              - allwinner,sun6i-a31-pinctrl
-              - allwinner,sun6i-a31s-pinctrl
-              - allwinner,sun50i-h6-pinctrl
-
-      then:
-        properties:
-          interrupts:
-            minItems: 4
-            maxItems: 4
-
-      else:
-        if:
-          properties:
-            compatible:
-              enum:
-                - allwinner,sun8i-a23-pinctrl
-                - allwinner,sun8i-a83t-pinctrl
-                - allwinner,sun50i-a64-pinctrl
-                - allwinner,sun50i-h5-pinctrl
-                - allwinner,suniv-f1c100s-pinctrl
-
-        then:
-          properties:
-            interrupts:
-              minItems: 3
-              maxItems: 3
-
-        else:
-          if:
-            properties:
-              compatible:
-                enum:
-                  - allwinner,sun6i-a31-r-pinctrl
-                  - allwinner,sun8i-a33-pinctrl
-                  - allwinner,sun8i-h3-pinctrl
-                  - allwinner,sun8i-v3-pinctrl
-                  - allwinner,sun8i-v3s-pinctrl
-                  - allwinner,sun9i-a80-r-pinctrl
-                  - allwinner,sun50i-h6-r-pinctrl
-
-          then:
-            properties:
-              interrupts:
-                minItems: 2
-                maxItems: 2
-
-          else:
-            properties:
-              interrupts:
-                minItems: 1
-                maxItems: 1
+  - if:
+      properties:
+        compatible:
+          enum:
+            - allwinner,sun6i-a31-pinctrl
+            - allwinner,sun6i-a31s-pinctrl
+            - allwinner,sun50i-h6-pinctrl
+
+    then:
+      properties:
+        interrupts:
+          minItems: 4
+          maxItems: 4
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - allwinner,sun8i-a23-pinctrl
+            - allwinner,sun8i-a83t-pinctrl
+            - allwinner,sun50i-a64-pinctrl
+            - allwinner,sun50i-h5-pinctrl
+            - allwinner,suniv-f1c100s-pinctrl
+
+    then:
+      properties:
+        interrupts:
+          minItems: 3
+          maxItems: 3
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - allwinner,sun6i-a31-r-pinctrl
+            - allwinner,sun8i-a33-pinctrl
+            - allwinner,sun8i-h3-pinctrl
+            - allwinner,sun8i-v3-pinctrl
+            - allwinner,sun8i-v3s-pinctrl
+            - allwinner,sun9i-a80-r-pinctrl
+            - allwinner,sun50i-h6-r-pinctrl
+
+    then:
+      properties:
+        interrupts:
+          minItems: 2
+          maxItems: 2
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - allwinner,sun4i-a10-pinctrl
+            - allwinner,sun5i-a10s-pinctrl
+            - allwinner,sun5i-a13-pinctrl
+            - allwinner,sun7i-a20-pinctrl
+            - allwinner,sun8i-a23-r-pinctrl
+            - allwinner,sun8i-a83t-r-pinctrl
+            - allwinner,sun8i-h3-r-pinctrl
+            - allwinner,sun8i-r40-pinctrl
+            - allwinner,sun50i-a64-r-pinctrl
+            - allwinner,sun50i-a100-r-pinctrl
+            - nextthing,gr8-pinctrl
+
+    then:
+      properties:
+        interrupts:
+          minItems: 1
+          maxItems: 1
 
 additionalProperties: false
 
diff --git a/dts/Bindings/pinctrl/atmel,at91-pio4-pinctrl.txt b/dts/Bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
index 04d16fb69e..265015bc06 100644
--- a/dts/Bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
+++ b/dts/Bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
@@ -4,7 +4,9 @@ The Atmel PIO4 controller is used to select the function of a pin and to
 configure it.
 
 Required properties:
-- compatible: "atmel,sama5d2-pinctrl".
+- compatible:
+	"atmel,sama5d2-pinctrl"
+	"microchip,sama7g5-pinctrl"
 - reg: base address and length of the PIO controller.
 - interrupts: interrupt outputs from the controller, one for each bank.
 - interrupt-controller: mark the device node as an interrupt controller.
diff --git a/dts/Bindings/pinctrl/cirrus,lochnagar.yaml b/dts/Bindings/pinctrl/cirrus,lochnagar.yaml
index 420d748560..a07dd19717 100644
--- a/dts/Bindings/pinctrl/cirrus,lochnagar.yaml
+++ b/dts/Bindings/pinctrl/cirrus,lochnagar.yaml
@@ -188,3 +188,5 @@ required:
   - gpio-ranges
   - pinctrl-0
   - pinctrl-names
+
+additionalProperties: false
diff --git a/dts/Bindings/pinctrl/cirrus,madera.yaml b/dts/Bindings/pinctrl/cirrus,madera.yaml
index 6bfc25d0e1..4cb174bf31 100644
--- a/dts/Bindings/pinctrl/cirrus,madera.yaml
+++ b/dts/Bindings/pinctrl/cirrus,madera.yaml
@@ -120,3 +120,5 @@ properties:
 required:
   - pinctrl-0
   - pinctrl-names
+
+additionalProperties: true
diff --git a/dts/Bindings/pinctrl/pincfg-node.yaml b/dts/Bindings/pinctrl/pincfg-node.yaml
index 13b7ab9dd6..71ed0a9def 100644
--- a/dts/Bindings/pinctrl/pincfg-node.yaml
+++ b/dts/Bindings/pinctrl/pincfg-node.yaml
@@ -138,3 +138,5 @@ properties:
       and the delay before latching a value to an output
       pin. Typically indicates how many double-inverters are
       used to delay the signal.
+
+additionalProperties: true
diff --git a/dts/Bindings/pinctrl/pinctrl-atlas7.txt b/dts/Bindings/pinctrl/pinctrl-atlas7.txt
index bf9b07016c..fbdd1a716a 100644
--- a/dts/Bindings/pinctrl/pinctrl-atlas7.txt
+++ b/dts/Bindings/pinctrl/pinctrl-atlas7.txt
@@ -60,7 +60,7 @@ For example, pinctrl might have properties like the following:
 Please refer to pinctrl-bindings.txt in this directory for details of the common
 pinctrl bindings used by client devices.
 
-SiRFatlas7's pinmux nodes act as a container for an abitrary number of subnodes.
+SiRFatlas7's pinmux nodes act as a container for an arbitrary number of subnodes.
 Each of these subnodes represents some desired configuration for a group of pins.
 
 Required subnode-properties:
diff --git a/dts/Bindings/pinctrl/pinctrl-mt65xx.txt b/dts/Bindings/pinctrl/pinctrl-mt65xx.txt
index 205be98ae0..931a18cd1e 100644
--- a/dts/Bindings/pinctrl/pinctrl-mt65xx.txt
+++ b/dts/Bindings/pinctrl/pinctrl-mt65xx.txt
@@ -10,6 +10,7 @@ Required properties:
 	"mediatek,mt7623-pinctrl", compatible with mt7623 pinctrl.
 	"mediatek,mt8127-pinctrl", compatible with mt8127 pinctrl.
 	"mediatek,mt8135-pinctrl", compatible with mt8135 pinctrl.
+	"mediatek,mt8167-pinctrl", compatible with mt8167 pinctrl.
 	"mediatek,mt8173-pinctrl", compatible with mt8173 pinctrl.
 	"mediatek,mt8516-pinctrl", compatible with mt8516 pinctrl.
 - pins-are-numbered: Specify the subnodes are using numbered pinmux to
diff --git a/dts/Bindings/pinctrl/pinctrl-mt8192.yaml b/dts/Bindings/pinctrl/pinctrl-mt8192.yaml
new file mode 100644
index 0000000000..5556def6b9
--- /dev/null
+++ b/dts/Bindings/pinctrl/pinctrl-mt8192.yaml
@@ -0,0 +1,155 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/pinctrl-mt8192.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT8192 Pin Controller
+
+maintainers:
+  - Sean Wang <sean.wang@mediatek.com>
+
+description: |
+  The Mediatek's Pin controller is used to control SoC pins.
+
+properties:
+  compatible:
+    const: mediatek,mt8192-pinctrl
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description: |
+      Number of cells in GPIO specifier. Since the generic GPIO binding is used,
+      the amount of cells must be specified as 2. See the below
+      mentioned gpio binding representation for description of particular cells.
+    const: 2
+
+  gpio-ranges:
+    description: gpio valid number range.
+    maxItems: 1
+
+  reg:
+    description: |
+      Physical address base for gpio base registers. There are 11 GPIO
+      physical address base in mt8192.
+    maxItems: 11
+
+  reg-names:
+    description: |
+      Gpio base register names.
+    maxItems: 11
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupts:
+    description: The interrupt outputs to sysirq.
+    maxItems: 1
+
+#PIN CONFIGURATION NODES
+patternProperties:
+  '^pins':
+    type: object
+    description: |
+      A pinctrl node should contain at least one subnodes representing the
+      pinctrl groups available on the machine. Each subnode will list the
+      pins it needs, and how they should be configured, with regard to muxer
+      configuration, pullups, drive strength, input enable/disable and
+      input schmitt.
+      An example of using macro:
+      pincontroller {
+        /* GPIO0 set as multifunction GPIO0 */
+        state_0_node_a {
+          pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
+        };
+        /* GPIO1 set as multifunction PWM */
+        state_0_node_b {
+          pinmux = <PINMUX_GPIO1__FUNC_PWM_1>;
+        };
+      };
+    $ref: "pinmux-node.yaml"
+
+    properties:
+      pinmux:
+        description: |
+          Integer array, represents gpio pin number and mux setting.
+          Supported pin number and mux varies for different SoCs, and are defined
+          as macros in dt-bindings/pinctrl/<soc>-pinfunc.h directly.
+
+      drive-strength:
+        description: |
+          It can support some arguments, such as MTK_DRIVE_4mA, MTK_DRIVE_6mA, etc. See
+          dt-bindings/pinctrl/mt65xx.h. It can only support 2/4/6/8/10/12/14/16mA in mt8192.
+        enum: [2, 4, 6, 8, 10, 12, 14, 16]
+
+      bias-pull-down: true
+
+      bias-pull-up: true
+
+      bias-disable: true
+
+      output-high: true
+
+      output-low: true
+
+      input-enable: true
+
+      input-disable: true
+
+      input-schmitt-enable: true
+
+      input-schmitt-disable: true
+
+    required:
+      - pinmux
+
+    additionalProperties:  false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+            #include <dt-bindings/pinctrl/mt8192-pinfunc.h>
+            #include <dt-bindings/interrupt-controller/arm-gic.h>
+            pio: pinctrl@10005000 {
+                    compatible = "mediatek,mt8192-pinctrl";
+                    reg = <0x10005000 0x1000>,
+                          <0x11c20000 0x1000>,
+                          <0x11d10000 0x1000>,
+                          <0x11d30000 0x1000>,
+                          <0x11d40000 0x1000>,
+                          <0x11e20000 0x1000>,
+                          <0x11e70000 0x1000>,
+                          <0x11ea0000 0x1000>,
+                          <0x11f20000 0x1000>,
+                          <0x11f30000 0x1000>,
+                          <0x1000b000 0x1000>;
+                    reg-names = "iocfg0", "iocfg_rm", "iocfg_bm",
+                          "iocfg_bl", "iocfg_br", "iocfg_lm",
+                          "iocfg_lb", "iocfg_rt", "iocfg_lt",
+                          "iocfg_tl", "eint";
+                    gpio-controller;
+                    #gpio-cells = <2>;
+                    gpio-ranges = <&pio 0 0 220>;
+                    interrupt-controller;
+                    interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH 0>;
+                    #interrupt-cells = <2>;
+
+                    pins {
+                      pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
+                      output-low;
+                    };
+            };
diff --git a/dts/Bindings/pinctrl/pinctrl-single.txt b/dts/Bindings/pinctrl/pinctrl-single.txt
index e705acd361..f903eb4471 100644
--- a/dts/Bindings/pinctrl/pinctrl-single.txt
+++ b/dts/Bindings/pinctrl/pinctrl-single.txt
@@ -94,16 +94,23 @@ pinctrl-single,bit-per-mux is set), and uses the common pinctrl bindings as
 specified in the pinctrl-bindings.txt document in this directory.
 
 The pin configuration nodes for pinctrl-single are specified as pinctrl
-register offset and value pairs using pinctrl-single,pins. Only the bits
-specified in pinctrl-single,function-mask are updated. For example, setting
-a pin for a device could be done with:
+register offset and values using pinctrl-single,pins. Only the bits specified
+in pinctrl-single,function-mask are updated.
+
+When #pinctrl-cells = 1, then setting a pin for a device could be done with:
 
 	pinctrl-single,pins = <0xdc 0x118>;
 
-Where 0xdc is the offset from the pinctrl register base address for the
-device pinctrl register, and 0x118 contains the desired value of the
-pinctrl register. See the device example and static board pins example
-below for more information.
+Where 0xdc is the offset from the pinctrl register base address for the device
+pinctrl register, and 0x118 contains the desired value of the pinctrl register.
+
+When #pinctrl-cells = 2, then setting a pin for a device could be done with:
+
+	pinctrl-single,pins = <0xdc 0x30 0x07>;
+
+Where 0x30 is the pin configuration value and 0x07 is the pin mux mode value.
+These two values are OR'd together to produce the value stored at offset 0xdc.
+See the device example and static board pins example below for more information.
 
 In case when one register changes more than one pin's mux the
 pinctrl-single,bits need to be used which takes three parameters:
diff --git a/dts/Bindings/pinctrl/pinmux-node.yaml b/dts/Bindings/pinctrl/pinmux-node.yaml
index ef8877ddb1..551df3d9b8 100644
--- a/dts/Bindings/pinctrl/pinmux-node.yaml
+++ b/dts/Bindings/pinctrl/pinmux-node.yaml
@@ -129,3 +129,5 @@ properties:
 
   pinctrl-pin-array:
     $ref: /schemas/types.yaml#/definitions/uint32-array
+
+additionalProperties: true
diff --git a/dts/Bindings/pinctrl/qcom,ipq4019-pinctrl.txt b/dts/Bindings/pinctrl/qcom,ipq4019-pinctrl.txt
index 0861afeccf..97858a7c07 100644
--- a/dts/Bindings/pinctrl/qcom,ipq4019-pinctrl.txt
+++ b/dts/Bindings/pinctrl/qcom,ipq4019-pinctrl.txt
@@ -26,7 +26,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the
 common pinctrl bindings used by client devices, including the meaning of the
 phrase "pin configuration node".
 
-The pin configuration nodes act as a container for an abitrary number of
+The pin configuration nodes act as a container for an arbitrary number of
 subnodes. Each of these subnodes represents some desired configuration for a
 pin, a group, or a list of pins or groups. This configuration can include the
 mux function to select on those pin(s)/group(s), and various pin configuration
diff --git a/dts/Bindings/pinctrl/qcom,msm8226-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,msm8226-pinctrl.yaml
new file mode 100644
index 0000000000..1f0f5757f9
--- /dev/null
+++ b/dts/Bindings/pinctrl/qcom,msm8226-pinctrl.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,msm8226-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. MSM8226 TLMM block
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  This binding describes the Top Level Mode Multiplexer block found in the
+  MSM8226 platform.
+
+properties:
+  compatible:
+    const: qcom,msm8226-pinctrl
+
+  reg:
+    description: Specifies the base address and size of the TLMM register space
+    maxItems: 1
+
+  interrupts:
+    description: Specifies the TLMM summary IRQ
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    description: Specifies the PIN numbers and Flags, as defined in
+      include/dt-bindings/interrupt-controller/irq.h
+    const: 2
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description: Specifying the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  gpio-reserved-ranges:
+    maxItems: 1
+
+#PIN CONFIGURATION NODES
+patternProperties:
+  '-pins$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: "/schemas/pinctrl/pincfg-node.yaml"
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-1][0-6])$"
+            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins. Functions are only valid for gpio pins.
+        enum: [ gpio, cci_i2c0, blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim5,
+          blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c5, blsp_spi1,
+          blsp_spi2, blsp_spi3, blsp_spi5, blsp_uart1, blsp_uart2,
+          blsp_uart3, blsp_uart5, cam_mclk0, cam_mclk1, wlan ]
+
+      drive-strength:
+        enum: [2, 4, 6, 8, 10, 12, 14, 16]
+        default: 2
+        description:
+          Selects the drive strength for the specified pins, in mA.
+
+      bias-pull-down: true
+
+      bias-pull-up: true
+
+      bias-disable: true
+
+      output-high: true
+
+      output-low: true
+
+    required:
+      - pins
+      - function
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+        msmgpio: pinctrl@fd510000 {
+                compatible = "qcom,msm8226-pinctrl";
+                reg = <0xfd510000 0x4000>;
+
+                gpio-controller;
+                #gpio-cells = <2>;
+                gpio-ranges = <&msmgpio 0 0 117>;
+                interrupt-controller;
+                #interrupt-cells = <2>;
+                interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+                serial-pins {
+                        pins = "gpio8", "gpio9";
+                        function = "blsp_uart3";
+                        drive-strength = <8>;
+                        bias-disable;
+                };
+        };
diff --git a/dts/Bindings/pinctrl/renesas,pfc-pinctrl.txt b/dts/Bindings/pinctrl/renesas,pfc-pinctrl.txt
deleted file mode 100644
index d75476e245..0000000000
--- a/dts/Bindings/pinctrl/renesas,pfc-pinctrl.txt
+++ /dev/null
@@ -1,188 +0,0 @@
-* Renesas Pin Function Controller (GPIO and Pin Mux/Config)
-
-The Pin Function Controller (PFC) is a Pin Mux/Config controller. On SH73A0,
-R8A73A4 and R8A7740 it also acts as a GPIO controller.
-
-
-Pin Control
------------
-
-Required Properties:
-
-  - compatible: should be one of the following.
-    - "renesas,pfc-emev2": for EMEV2 (EMMA Mobile EV2) compatible pin-controller.
-    - "renesas,pfc-r8a73a4": for R8A73A4 (R-Mobile APE6) compatible pin-controller.
-    - "renesas,pfc-r8a7740": for R8A7740 (R-Mobile A1) compatible pin-controller.
-    - "renesas,pfc-r8a7742": for R8A7742 (RZ/G1H) compatible pin-controller.
-    - "renesas,pfc-r8a7743": for R8A7743 (RZ/G1M) compatible pin-controller.
-    - "renesas,pfc-r8a7744": for R8A7744 (RZ/G1N) compatible pin-controller.
-    - "renesas,pfc-r8a7745": for R8A7745 (RZ/G1E) compatible pin-controller.
-    - "renesas,pfc-r8a77470": for R8A77470 (RZ/G1C) compatible pin-controller.
-    - "renesas,pfc-r8a774a1": for R8A774A1 (RZ/G2M) compatible pin-controller.
-    - "renesas,pfc-r8a774b1": for R8A774B1 (RZ/G2N) compatible pin-controller.
-    - "renesas,pfc-r8a774c0": for R8A774C0 (RZ/G2E) compatible pin-controller.
-    - "renesas,pfc-r8a774e1": for R8A774E1 (RZ/G2H) compatible pin-controller.
-    - "renesas,pfc-r8a7778": for R8A7778 (R-Car M1) compatible pin-controller.
-    - "renesas,pfc-r8a7779": for R8A7779 (R-Car H1) compatible pin-controller.
-    - "renesas,pfc-r8a7790": for R8A7790 (R-Car H2) compatible pin-controller.
-    - "renesas,pfc-r8a7791": for R8A7791 (R-Car M2-W) compatible pin-controller.
-    - "renesas,pfc-r8a7792": for R8A7792 (R-Car V2H) compatible pin-controller.
-    - "renesas,pfc-r8a7793": for R8A7793 (R-Car M2-N) compatible pin-controller.
-    - "renesas,pfc-r8a7794": for R8A7794 (R-Car E2) compatible pin-controller.
-    - "renesas,pfc-r8a7795": for R8A7795 (R-Car H3) compatible pin-controller.
-    - "renesas,pfc-r8a7796": for R8A77960 (R-Car M3-W) compatible pin-controller.
-    - "renesas,pfc-r8a77961": for R8A77961 (R-Car M3-W+) compatible pin-controller.
-    - "renesas,pfc-r8a77965": for R8A77965 (R-Car M3-N) compatible pin-controller.
-    - "renesas,pfc-r8a77970": for R8A77970 (R-Car V3M) compatible pin-controller.
-    - "renesas,pfc-r8a77980": for R8A77980 (R-Car V3H) compatible pin-controller.
-    - "renesas,pfc-r8a77990": for R8A77990 (R-Car E3) compatible pin-controller.
-    - "renesas,pfc-r8a77995": for R8A77995 (R-Car D3) compatible pin-controller.
-    - "renesas,pfc-sh73a0": for SH73A0 (SH-Mobile AG5) compatible pin-controller.
-
-  - reg: Base address and length of each memory resource used by the pin
-    controller hardware module.
-
-Optional properties:
-
-  - #gpio-range-cells: Mandatory when the PFC doesn't handle GPIO, forbidden
-    otherwise. Should be 3.
-
-  - interrupts-extended: Specify the interrupts associated with external
-    IRQ pins. This property is mandatory when the PFC handles GPIOs and
-    forbidden otherwise. When specified, it must contain one interrupt per
-    external IRQ, sorted by external IRQ number.
-
-The PFC node also acts as a container for pin configuration nodes. Please refer
-to pinctrl-bindings.txt in this directory for the definition of the term "pin
-configuration node" and for the common pinctrl bindings used by client devices.
-
-Each pin configuration node represents a desired configuration for a pin, a
-pin group, or a list of pins or pin groups. The configuration can include the
-function to select on those pin(s) and pin configuration parameters (such as
-pull-up and pull-down).
-
-Pin configuration nodes contain pin configuration properties, either directly
-or grouped in child subnodes. Both pin muxing and configuration parameters can
-be grouped in that way and referenced as a single pin configuration node by
-client devices.
-
-A configuration node or subnode must reference at least one pin (through the
-pins or pin groups properties) and contain at least a function or one
-configuration parameter. When the function is present only pin groups can be
-used to reference pins.
-
-All pin configuration nodes and subnodes names are ignored. All of those nodes
-are parsed through phandles and processed purely based on their content.
-
-Pin Configuration Node Properties:
-
-- pins : An array of strings, each string containing the name of a pin.
-- groups : An array of strings, each string containing the name of a pin
-  group.
-
-- function: A string containing the name of the function to mux to the pin
-  group(s) specified by the groups property.
-
-  Valid values for pin, group and function names can be found in the group and
-  function arrays of the PFC data file corresponding to the SoC
-  (drivers/pinctrl/sh-pfc/pfc-*.c)
-
-The pin configuration parameters use the generic pinconf bindings defined in
-pinctrl-bindings.txt in this directory. The supported parameters are
-bias-disable, bias-pull-up, bias-pull-down, drive-strength and power-source. For
-pins that have a configurable I/O voltage, the power-source value should be the
-nominal I/O voltage in millivolts.
-
-
-GPIO
-----
-
-On SH73A0, R8A73A4 and R8A7740 the PFC node is also a GPIO controller node.
-
-Required Properties:
-
-  - gpio-controller: Marks the device node as a gpio controller.
-
-  - #gpio-cells: Should be 2. The first cell is the GPIO number and the second
-    cell specifies GPIO flags, as defined in <dt-bindings/gpio/gpio.h>. Only the
-    GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported.
-
-The syntax of the gpio specifier used by client nodes should be the following
-with values derived from the SoC user manual.
-
-  <[phandle of the gpio controller node]
-   [pin number within the gpio controller]
-   [flags]>
-
-On other mach-shmobile platforms GPIO is handled by the gpio-rcar driver.
-Please refer to Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml
-for documentation of the GPIO device tree bindings on those platforms.
-
-
-Examples
---------
-
-Example 1: SH73A0 (SH-Mobile AG5) pin controller node
-
-	pfc: pin-controller@e6050000 {
-		compatible = "renesas,pfc-sh73a0";
-		reg = <0xe6050000 0x8000>,
-		      <0xe605801c 0x1c>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupts-extended =
-			<&irqpin0 0 0>, <&irqpin0 1 0>, <&irqpin0 2 0>, <&irqpin0 3 0>,
-			<&irqpin0 4 0>, <&irqpin0 5 0>, <&irqpin0 6 0>, <&irqpin0 7 0>,
-			<&irqpin1 0 0>, <&irqpin1 1 0>, <&irqpin1 2 0>, <&irqpin1 3 0>,
-			<&irqpin1 4 0>, <&irqpin1 5 0>, <&irqpin1 6 0>, <&irqpin1 7 0>,
-			<&irqpin2 0 0>, <&irqpin2 1 0>, <&irqpin2 2 0>, <&irqpin2 3 0>,
-			<&irqpin2 4 0>, <&irqpin2 5 0>, <&irqpin2 6 0>, <&irqpin2 7 0>,
-			<&irqpin3 0 0>, <&irqpin3 1 0>, <&irqpin3 2 0>, <&irqpin3 3 0>,
-			<&irqpin3 4 0>, <&irqpin3 5 0>, <&irqpin3 6 0>, <&irqpin3 7 0>;
-	};
-
-Example 2: A GPIO LED node that references a GPIO
-
-	#include <dt-bindings/gpio/gpio.h>
-
-	leds {
-		compatible = "gpio-leds";
-		led1 {
-			gpios = <&pfc 20 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-Example 3: KZM-A9-GT (SH-Mobile AG5) default pin state hog and pin control maps
-           for the MMCIF and SCIFA4 devices
-
-	&pfc {
-		pinctrl-0 = <&scifa4_pins>;
-		pinctrl-names = "default";
-
-		mmcif_pins: mmcif {
-			mux {
-				groups = "mmc0_data8_0", "mmc0_ctrl_0";
-				function = "mmc0";
-			};
-			cfg {
-				groups = "mmc0_data8_0";
-				pins = "PORT279";
-				bias-pull-up;
-			};
-		};
-
-		scifa4_pins: scifa4 {
-			groups = "scifa4_data", "scifa4_ctrl";
-			function = "scifa4";
-		};
-	};
-
-Example 4: KZM-A9-GT (SH-Mobile AG5) default pin state for the MMCIF device
-
-	&mmcif {
-		pinctrl-0 = <&mmcif_pins>;
-		pinctrl-names = "default";
-
-		bus-width = <8>;
-		vmmc-supply = <&reg_1p8v>;
-	};
diff --git a/dts/Bindings/pinctrl/renesas,pfc.yaml b/dts/Bindings/pinctrl/renesas,pfc.yaml
new file mode 100644
index 0000000000..5b5b1b9d2e
--- /dev/null
+++ b/dts/Bindings/pinctrl/renesas,pfc.yaml
@@ -0,0 +1,193 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/renesas,pfc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Pin Function Controller (GPIO and Pin Mux/Config)
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description:
+  The Pin Function Controller (PFC) is a Pin Mux/Config controller.
+  On SH/R-Mobile SoCs it also acts as a GPIO controller.
+
+properties:
+  compatible:
+    enum:
+      - renesas,pfc-emev2       # EMMA Mobile EV2
+      - renesas,pfc-r8a73a4     # R-Mobile APE6
+      - renesas,pfc-r8a7740     # R-Mobile A1
+      - renesas,pfc-r8a7742     # RZ/G1H
+      - renesas,pfc-r8a7743     # RZ/G1M
+      - renesas,pfc-r8a7744     # RZ/G1N
+      - renesas,pfc-r8a7745     # RZ/G1E
+      - renesas,pfc-r8a77470    # RZ/G1C
+      - renesas,pfc-r8a774a1    # RZ/G2M
+      - renesas,pfc-r8a774b1    # RZ/G2N
+      - renesas,pfc-r8a774c0    # RZ/G2E
+      - renesas,pfc-r8a774e1    # RZ/G2H
+      - renesas,pfc-r8a7778     # R-Car M1
+      - renesas,pfc-r8a7779     # R-Car H1
+      - renesas,pfc-r8a7790     # R-Car H2
+      - renesas,pfc-r8a7791     # R-Car M2-W
+      - renesas,pfc-r8a7792     # R-Car V2H
+      - renesas,pfc-r8a7793     # R-Car M2-N
+      - renesas,pfc-r8a7794     # R-Car E2
+      - renesas,pfc-r8a7795     # R-Car H3
+      - renesas,pfc-r8a7796     # R-Car M3-W
+      - renesas,pfc-r8a77961    # R-Car M3-W+
+      - renesas,pfc-r8a77965    # R-Car M3-N
+      - renesas,pfc-r8a77970    # R-Car V3M
+      - renesas,pfc-r8a77980    # R-Car V3H
+      - renesas,pfc-r8a77990    # R-Car E3
+      - renesas,pfc-r8a77995    # R-Car D3
+      - renesas,pfc-sh73a0      # SH-Mobile AG5
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-ranges:
+    minItems: 1
+    maxItems: 16
+
+  interrupts-extended:
+    minItems: 32
+    maxItems: 64
+    description:
+      Specify the interrupts associated with external IRQ pins on SoCs where
+      the PFC acts as a GPIO controller.  It must contain one interrupt per
+      external IRQ, sorted by external IRQ number.
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+if:
+  properties:
+    compatible:
+      items:
+        enum:
+          - renesas,pfc-r8a73a4
+          - renesas,pfc-r8a7740
+          - renesas,pfc-sh73a0
+then:
+  required:
+    - interrupts-extended
+    - gpio-controller
+    - '#gpio-cells'
+    - gpio-ranges
+    - power-domains
+
+additionalProperties:
+  anyOf:
+    - type: object
+      allOf:
+        - $ref: pincfg-node.yaml#
+        - $ref: pinmux-node.yaml#
+
+      description:
+        Pin controller client devices use pin configuration subnodes (children
+        and grandchildren) for desired pin configuration.
+        Client device subnodes use below standard properties.
+
+      properties:
+        phandle: true
+        function: true
+        groups: true
+        pins: true
+        bias-disable: true
+        bias-pull-down: true
+        bias-pull-up: true
+        drive-strength:
+          enum: [ 3, 6, 9, 12, 15, 18, 21, 24 ] # Superset of supported values
+        power-source:
+          enum: [ 1800, 3300 ]
+        gpio-hog: true
+        gpios: true
+        input: true
+        output-high: true
+        output-low: true
+
+      additionalProperties: false
+
+    - type: object
+      properties:
+        phandle: true
+
+      additionalProperties:
+        $ref: "#/additionalProperties/anyOf/0"
+
+examples:
+  - |
+    pfc: pinctrl@e6050000 {
+            compatible = "renesas,pfc-r8a7740";
+            reg = <0xe6050000 0x8000>,
+                  <0xe605800c 0x20>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            gpio-ranges = <&pfc 0 0 212>;
+            interrupts-extended =
+                <&irqpin0 0 0>, <&irqpin0 1 0>, <&irqpin0 2 0>, <&irqpin0 3 0>,
+                <&irqpin0 4 0>, <&irqpin0 5 0>, <&irqpin0 6 0>, <&irqpin0 7 0>,
+                <&irqpin1 0 0>, <&irqpin1 1 0>, <&irqpin1 2 0>, <&irqpin1 3 0>,
+                <&irqpin1 4 0>, <&irqpin1 5 0>, <&irqpin1 6 0>, <&irqpin1 7 0>,
+                <&irqpin2 0 0>, <&irqpin2 1 0>, <&irqpin2 2 0>, <&irqpin2 3 0>,
+                <&irqpin2 4 0>, <&irqpin2 5 0>, <&irqpin2 6 0>, <&irqpin2 7 0>,
+                <&irqpin3 0 0>, <&irqpin3 1 0>, <&irqpin3 2 0>, <&irqpin3 3 0>,
+                <&irqpin3 4 0>, <&irqpin3 5 0>, <&irqpin3 6 0>, <&irqpin3 7 0>;
+            power-domains = <&pd_c5>;
+
+            lcd0-mux-hog {
+                    /* DBGMD/LCDC0/FSIA MUX */
+                    gpio-hog;
+                    gpios = <176 0>;
+                    output-high;
+            };
+    };
+
+  - |
+    pinctrl@e6060000 {
+            compatible = "renesas,pfc-r8a7795";
+            reg = <0xe6060000 0x50c>;
+
+            avb_pins: avb {
+                    mux {
+                            groups = "avb_link", "avb_mdio", "avb_mii";
+                            function = "avb";
+                    };
+
+                    pins_mdio {
+                            groups = "avb_mdio";
+                            drive-strength = <24>;
+                    };
+
+                    pins_mii_tx {
+                            pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC",
+                                   "PIN_AVB_TD0", "PIN_AVB_TD1", "PIN_AVB_TD2",
+                                   "PIN_AVB_TD3";
+                            drive-strength = <12>;
+                    };
+            };
+
+            keys_pins: keys {
+                    pins = "GP_5_17", "GP_5_20", "GP_5_22", "GP_2_1";
+                    bias-pull-up;
+            };
+
+            sdhi0_pins: sd0 {
+                    groups = "sdhi0_data4", "sdhi0_ctrl";
+                    function = "sdhi0";
+                    power-source = <3300>;
+            };
+    };
diff --git a/dts/Bindings/pinctrl/renesas,rza1-pinctrl.txt b/dts/Bindings/pinctrl/renesas,rza1-pinctrl.txt
deleted file mode 100644
index fd3696eb36..0000000000
--- a/dts/Bindings/pinctrl/renesas,rza1-pinctrl.txt
+++ /dev/null
@@ -1,223 +0,0 @@
-Renesas RZ/A1 combined Pin and GPIO controller
-
-The Renesas SoCs of the RZ/A1 family feature a combined Pin and GPIO controller,
-named "Ports" in the hardware reference manual.
-Pin multiplexing and GPIO configuration is performed on a per-pin basis
-writing configuration values to per-port register sets.
-Each "port" features up to 16 pins, each of them configurable for GPIO
-function (port mode) or in alternate function mode.
-Up to 8 different alternate function modes exist for each single pin.
-
-Pin controller node
--------------------
-
-Required properties:
-  - compatible: should be:
-    - "renesas,r7s72100-ports": for RZ/A1H
-    - "renesas,r7s72101-ports", "renesas,r7s72100-ports": for RZ/A1M
-    - "renesas,r7s72102-ports": for RZ/A1L
-
-  - reg
-    address base and length of the memory area where the pin controller
-    hardware is mapped to.
-
-Example:
-Pin controller node for RZ/A1H SoC (r7s72100)
-
-pinctrl: pin-controller@fcfe3000 {
-	compatible = "renesas,r7s72100-ports";
-
-	reg = <0xfcfe3000 0x4230>;
-};
-
-Sub-nodes
----------
-
-The child nodes of the pin controller node describe a pin multiplexing
-function or a GPIO controller alternatively.
-
-- Pin multiplexing sub-nodes:
-  A pin multiplexing sub-node describes how to configure a set of
-  (or a single) pin in some desired alternate function mode.
-  A single sub-node may define several pin configurations.
-  A few alternate function require special pin configuration flags to be
-  supplied along with the alternate function configuration number.
-  The hardware reference manual specifies when a pin function requires
-  "software IO driven" mode to be specified. To do so use the generic
-  properties from the <include/linux/pinctrl/pinconf_generic.h> header file
-  to instruct the pin controller to perform the desired pin configuration
-  operation.
-  Please refer to pinctrl-bindings.txt to get to know more on generic
-  pin properties usage.
-
-  The allowed generic formats for a pin multiplexing sub-node are the
-  following ones:
-
-  node-1 {
-      pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
-      GENERIC_PINCONFIG;
-  };
-
-  node-2 {
-      sub-node-1 {
-          pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
-          GENERIC_PINCONFIG;
-      };
-
-      sub-node-2 {
-          pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
-          GENERIC_PINCONFIG;
-      };
-
-      ...
-
-      sub-node-n {
-          pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
-          GENERIC_PINCONFIG;
-      };
-  };
-
-  Use the second format when pins part of the same logical group need to have
-  different generic pin configuration flags applied.
-
-  Client sub-nodes shall refer to pin multiplexing sub-nodes using the phandle
-  of the most external one.
-
-  Eg.
-
-  client-1 {
-      ...
-      pinctrl-0 = <&node-1>;
-      ...
-  };
-
-  client-2 {
-      ...
-      pinctrl-0 = <&node-2>;
-      ...
-  };
-
-  Required properties:
-    - pinmux:
-      integer array representing pin number and pin multiplexing configuration.
-      When a pin has to be configured in alternate function mode, use this
-      property to identify the pin by its global index, and provide its
-      alternate function configuration number along with it.
-      When multiple pins are required to be configured as part of the same
-      alternate function they shall be specified as members of the same
-      argument list of a single "pinmux" property.
-      Helper macros to ease assembling the pin index from its position
-      (port where it sits on and pin number) and alternate function identifier
-      are provided by the pin controller header file at:
-      <include/dt-bindings/pinctrl/r7s72100-pinctrl.h>
-      Integers values in "pinmux" argument list are assembled as:
-      ((PORT * 16 + PIN) | MUX_FUNC << 16)
-
-  Optional generic properties:
-    - input-enable:
-      enable input bufer for pins requiring software driven IO input
-      operations.
-    - output-high:
-      enable output buffer for pins requiring software driven IO output
-      operations. output-low can be used alternatively, as line value is
-      ignored by the driver.
-
-  The hardware reference manual specifies when a pin has to be configured to
-  work in bi-directional mode and when the IO direction has to be specified
-  by software. Bi-directional pins are managed by the pin controller driver
-  internally, while software driven IO direction has to be explicitly
-  selected when multiple options are available.
-
-  Example:
-  A serial communication interface with a TX output pin and an RX input pin.
-
-  &pinctrl {
-	scif2_pins: serial2 {
-		pinmux = <RZA1_PINMUX(3, 0, 6)>, <RZA1_PINMUX(3, 2, 4)>;
-	};
-  };
-
-  Pin #0 on port #3 is configured as alternate function #6.
-  Pin #2 on port #3 is configured as alternate function #4.
-
-  Example 2:
-  I2c master: both SDA and SCL pins need bi-directional operations
-
-  &pinctrl {
-	i2c2_pins: i2c2 {
-		pinmux = <RZA1_PINMUX(1, 4, 1)>, <RZA1_PINMUX(1, 5, 1)>;
-	};
-  };
-
-  Pin #4 on port #1 is configured as alternate function #1.
-  Pin #5 on port #1 is configured as alternate function #1.
-  Both need to work in bi-directional mode, the driver manages this internally.
-
-  Example 3:
-  Multi-function timer input and output compare pins.
-  Configure TIOC0A as software driven input and TIOC0B as software driven
-  output.
-
-  &pinctrl {
-	tioc0_pins: tioc0 {
-		tioc0_input_pins {
-			pinumx = <RZA1_PINMUX(4, 0, 2)>;
-			input-enable;
-		};
-
-		tioc0_output_pins {
-			pinmux = <RZA1_PINMUX(4, 1, 1)>;
-			output-enable;
-		};
-	};
-  };
-
-  &tioc0 {
-	...
-	pinctrl-0 = <&tioc0_pins>;
-	...
-  };
-
-  Pin #0 on port #4 is configured as alternate function #2 with IO direction
-  specified by software as input.
-  Pin #1 on port #4 is configured as alternate function #1 with IO direction
-  specified by software as output.
-
-- GPIO controller sub-nodes:
-  Each port of the r7s72100 pin controller hardware is itself a GPIO controller.
-  Different SoCs have different numbers of available pins per port, but
-  generally speaking, each of them can be configured in GPIO ("port") mode
-  on this hardware.
-  Describe GPIO controllers using sub-nodes with the following properties.
-
-  Required properties:
-    - gpio-controller
-      empty property as defined by the GPIO bindings documentation.
-    - #gpio-cells
-      number of cells required to identify and configure a GPIO.
-      Shall be 2.
-    - gpio-ranges
-      Describes a GPIO controller specifying its specific pin base, the pin
-      base in the global pin numbering space, and the number of controlled
-      pins, as defined by the GPIO bindings documentation. Refer to
-      Documentation/devicetree/bindings/gpio/gpio.txt file for a more detailed
-      description.
-
-  Example:
-  A GPIO controller node, controlling 16 pins indexed from 0.
-  The GPIO controller base in the global pin indexing space is pin 48, thus
-  pins [0 - 15] on this controller map to pins [48 - 63] in the global pin
-  indexing space.
-
-  port3: gpio-3 {
-	gpio-controller;
-	#gpio-cells = <2>;
-	gpio-ranges = <&pinctrl 0 48 16>;
-  };
-
-  A device node willing to use pins controlled by this GPIO controller, shall
-  refer to it as follows:
-
-  led1 {
-	gpios = <&port3 10 GPIO_ACTIVE_LOW>;
-  };
diff --git a/dts/Bindings/pinctrl/renesas,rza1-ports.yaml b/dts/Bindings/pinctrl/renesas,rza1-ports.yaml
new file mode 100644
index 0000000000..7f80578dc2
--- /dev/null
+++ b/dts/Bindings/pinctrl/renesas,rza1-ports.yaml
@@ -0,0 +1,190 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/renesas,rza1-ports.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/A1 combined Pin and GPIO controller
+
+maintainers:
+  - Jacopo Mondi <jacopo+renesas@jmondi.org>
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description:
+  The Renesas SoCs of the RZ/A1 family feature a combined Pin and GPIO
+  controller, named "Ports" in the hardware reference manual.
+  Pin multiplexing and GPIO configuration is performed on a per-pin basis
+  writing configuration values to per-port register sets.
+  Each "port" features up to 16 pins, each of them configurable for GPIO
+  function (port mode) or in alternate function mode.
+  Up to 8 different alternate function modes exist for each single pin.
+
+properties:
+  compatible:
+    oneOf:
+      - const: renesas,r7s72100-ports     # RZ/A1H
+      - items:
+          - const: renesas,r7s72101-ports # RZ/A1M
+          - const: renesas,r7s72100-ports # fallback
+      - const: renesas,r7s72102-ports     # RZ/A1L
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+patternProperties:
+  "^gpio-[0-9]*$":
+    type: object
+
+    description:
+      Each port of the r7s72100 pin controller hardware is itself a GPIO
+      controller.
+      Different SoCs have different numbers of available pins per port, but
+      generally speaking, each of them can be configured in GPIO ("port") mode
+      on this hardware.
+      Describe GPIO controllers using sub-nodes with the following properties.
+
+    properties:
+      gpio-controller: true
+
+      '#gpio-cells':
+        const: 2
+
+      gpio-ranges:
+        maxItems: 1
+
+    required:
+      - gpio-controller
+      - '#gpio-cells'
+      - gpio-ranges
+
+
+additionalProperties:
+  anyOf:
+    - type: object
+      allOf:
+        - $ref: pincfg-node.yaml#
+        - $ref: pinmux-node.yaml#
+
+      description:
+        A pin multiplexing sub-node describes how to configure a set of (or a
+        single) pin in some desired alternate function mode.
+        A single sub-node may define several pin configurations.
+        A few alternate function require special pin configuration flags to be
+        supplied along with the alternate function configuration number.
+        The hardware reference manual specifies when a pin function requires
+        "software IO driven" mode to be specified. To do so use the generic
+        properties from the <include/linux/pinctrl/pinconf_generic.h> header
+        file to instruct the pin controller to perform the desired pin
+        configuration operation.
+        The hardware reference manual specifies when a pin has to be configured
+        to work in bi-directional mode and when the IO direction has to be
+        specified by software. Bi-directional pins must be managed by the pin
+        controller driver internally, while software driven IO direction has to
+        be explicitly selected when multiple options are available.
+
+      properties:
+        pinmux:
+          description: |
+            Integer array representing pin number and pin multiplexing
+            configuration.
+            When a pin has to be configured in alternate function mode, use
+            this property to identify the pin by its global index, and provide
+            its alternate function configuration number along with it.
+            When multiple pins are required to be configured as part of the
+            same alternate function they shall be specified as members of the
+            same argument list of a single "pinmux" property.
+            Helper macros to ease assembling the pin index from its position
+            (port where it sits on and pin number) and alternate function
+            identifier are provided by the pin controller header file at:
+            <include/dt-bindings/pinctrl/r7s72100-pinctrl.h>
+            Integers values in "pinmux" argument list are assembled as:
+            ((PORT * 16 + PIN) | MUX_FUNC << 16)
+
+        phandle: true
+        input-enable: true
+        output-enable: true
+
+      required:
+        - pinmux
+
+      additionalProperties: false
+
+    - type: object
+      properties:
+        phandle: true
+
+      additionalProperties:
+        $ref: "#/additionalProperties/anyOf/0"
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/r7s72100-pinctrl.h>
+    pinctrl: pinctrl@fcfe3000 {
+            compatible = "renesas,r7s72100-ports";
+
+            reg = <0xfcfe3000 0x4230>;
+
+            /*
+             * A GPIO controller node, controlling 16 pins indexed from 0.
+             * The GPIO controller base in the global pin indexing space is pin
+             * 48, thus pins [0 - 15] on this controller map to pins [48 - 63]
+             * in the global pin indexing space.
+             */
+            port3: gpio-3 {
+                    gpio-controller;
+                    #gpio-cells = <2>;
+                    gpio-ranges = <&pinctrl 0 48 16>;
+            };
+
+            /*
+             * A serial communication interface with a TX output pin and an RX
+             * input pin.
+             * Pin #0 on port #3 is configured as alternate function #6.
+             * Pin #2 on port #3 is configured as alternate function #4.
+             */
+            scif2_pins: serial2 {
+                    pinmux = <RZA1_PINMUX(3, 0, 6)>, <RZA1_PINMUX(3, 2, 4)>;
+            };
+
+
+            /*
+             * I2c master: both SDA and SCL pins need bi-directional operations
+             * Pin #4 on port #1 is configured as alternate function #1.
+             * Pin #5 on port #1 is configured as alternate function #1.
+             * Both need to work in bi-directional mode, the driver must manage
+             * this internally.
+             */
+            i2c2_pins: i2c2 {
+                    pinmux = <RZA1_PINMUX(1, 4, 1)>, <RZA1_PINMUX(1, 5, 1)>;
+            };
+
+
+            /*
+             * Multi-function timer input and output compare pins.
+             */
+            tioc0_pins: tioc0 {
+                    /*
+                     * Configure TIOC0A as software driven input
+                     * Pin #0 on port #4 is configured as alternate function #2
+                     * with IO direction specified by software as input.
+                     */
+                    tioc0_input_pins {
+                            pinmux = <RZA1_PINMUX(4, 0, 2)>;
+                            input-enable;
+                    };
+
+                    /*
+                     * Configure TIOC0B as software driven output
+                     * Pin #1 on port #4 is configured as alternate function #1
+                     * with IO direction specified by software as output.
+                     */
+                    tioc0_output_pins {
+                            pinmux = <RZA1_PINMUX(4, 1, 1)>;
+                            output-enable;
+                    };
+            };
+    };
diff --git a/dts/Bindings/pinctrl/renesas,rza2-pinctrl.yaml b/dts/Bindings/pinctrl/renesas,rza2-pinctrl.yaml
index b7911a994f..ce1f734378 100644
--- a/dts/Bindings/pinctrl/renesas,rza2-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/renesas,rza2-pinctrl.yaml
@@ -84,7 +84,7 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/pinctrl/r7s9210-pinctrl.h>
-    pinctrl: pin-controller@fcffe000 {
+    pinctrl: pinctrl@fcffe000 {
             compatible = "renesas,r7s9210-pinctrl";
             reg = <0xfcffe000 0x1000>;
 
diff --git a/dts/Bindings/pinctrl/renesas,rzn1-pinctrl.txt b/dts/Bindings/pinctrl/renesas,rzn1-pinctrl.txt
deleted file mode 100644
index 25e53acd52..0000000000
--- a/dts/Bindings/pinctrl/renesas,rzn1-pinctrl.txt
+++ /dev/null
@@ -1,153 +0,0 @@
-Renesas RZ/N1 SoC Pinctrl node description.
-
-Pin controller node
--------------------
-Required properties:
-- compatible: SoC-specific compatible string "renesas,<soc-specific>-pinctrl"
-  followed by "renesas,rzn1-pinctrl" as fallback. The SoC-specific compatible
-  strings must be one of:
-	"renesas,r9a06g032-pinctrl" for RZ/N1D
-	"renesas,r9a06g033-pinctrl" for RZ/N1S
-- reg: Address base and length of the memory area where the pin controller
-  hardware is mapped to.
-- clocks: phandle for the clock, see the description of clock-names below.
-- clock-names: Contains the name of the clock:
-    "bus", the bus clock, sometimes described as pclk, for register accesses.
-
-Example:
-	pinctrl: pin-controller@40067000 {
-	    compatible = "renesas,r9a06g032-pinctrl", "renesas,rzn1-pinctrl";
-	    reg = <0x40067000 0x1000>, <0x51000000 0x480>;
-	    clocks = <&sysctrl R9A06G032_HCLK_PINCONFIG>;
-	    clock-names = "bus";
-	};
-
-Sub-nodes
----------
-
-The child nodes of the pin controller node describe a pin multiplexing
-function.
-
-- Pin multiplexing sub-nodes:
-  A pin multiplexing sub-node describes how to configure a set of
-  (or a single) pin in some desired alternate function mode.
-  A single sub-node may define several pin configurations.
-  Please refer to pinctrl-bindings.txt to get to know more on generic
-  pin properties usage.
-
-  The allowed generic formats for a pin multiplexing sub-node are the
-  following ones:
-
-  node-1 {
-      pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
-      GENERIC_PINCONFIG;
-  };
-
-  node-2 {
-      sub-node-1 {
-          pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
-          GENERIC_PINCONFIG;
-      };
-
-      sub-node-2 {
-          pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
-          GENERIC_PINCONFIG;
-      };
-
-      ...
-
-      sub-node-n {
-          pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
-          GENERIC_PINCONFIG;
-      };
-  };
-
-  node-3 {
-      pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
-      GENERIC_PINCONFIG;
-
-      sub-node-1 {
-          pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
-          GENERIC_PINCONFIG;
-      };
-
-      ...
-
-      sub-node-n {
-          pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
-          GENERIC_PINCONFIG;
-      };
-  };
-
-  Use the latter two formats when pins part of the same logical group need to
-  have different generic pin configuration flags applied. Note that the generic
-  pinconfig in node-3 does not apply to the sub-nodes.
-
-  Client sub-nodes shall refer to pin multiplexing sub-nodes using the phandle
-  of the most external one.
-
-  Eg.
-
-  client-1 {
-      ...
-      pinctrl-0 = <&node-1>;
-      ...
-  };
-
-  client-2 {
-      ...
-      pinctrl-0 = <&node-2>;
-      ...
-  };
-
-  Required properties:
-    - pinmux:
-      integer array representing pin number and pin multiplexing configuration.
-      When a pin has to be configured in alternate function mode, use this
-      property to identify the pin by its global index, and provide its
-      alternate function configuration number along with it.
-      When multiple pins are required to be configured as part of the same
-      alternate function they shall be specified as members of the same
-      argument list of a single "pinmux" property.
-      Integers values in the "pinmux" argument list are assembled as:
-      (PIN | MUX_FUNC << 8)
-      where PIN directly corresponds to the pl_gpio pin number and MUX_FUNC is
-      one of the alternate function identifiers defined in:
-      <include/dt-bindings/pinctrl/rzn1-pinctrl.h>
-      These identifiers collapse the IO Multiplex Configuration Level 1 and
-      Level 2 numbers that are detailed in the hardware reference manual into a
-      single number. The identifiers for Level 2 are simply offset by 10.
-      Additional identifiers are provided to specify the MDIO source peripheral.
-
-  Optional generic pinconf properties:
-    - bias-disable		- disable any pin bias
-    - bias-pull-up		- pull up the pin with 50 KOhm
-    - bias-pull-down		- pull down the pin with 50 KOhm
-    - bias-high-impedance	- high impedance mode
-    - drive-strength		- sink or source at most 4, 6, 8 or 12 mA
-
-  Example:
-  A serial communication interface with a TX output pin and an RX input pin.
-
-  &pinctrl {
-	pins_uart0: pins_uart0 {
-		pinmux = <
-			RZN1_PINMUX(103, RZN1_FUNC_UART0_I)	/* UART0_TXD */
-			RZN1_PINMUX(104, RZN1_FUNC_UART0_I)	/* UART0_RXD */
-		>;
-	};
-  };
-
-  Example 2:
-  Here we set the pull up on the RXD pin of the UART.
-
-  &pinctrl {
-	pins_uart0: pins_uart0 {
-		pinmux = <RZN1_PINMUX(103, RZN1_FUNC_UART0_I)>;	/* TXD */
-
-		pins_uart6_rx {
-			pinmux = <RZN1_PINMUX(104, RZN1_FUNC_UART0_I)>; /* RXD */
-			bias-pull-up;
-		};
-	};
-  };
diff --git a/dts/Bindings/pinctrl/renesas,rzn1-pinctrl.yaml b/dts/Bindings/pinctrl/renesas,rzn1-pinctrl.yaml
new file mode 100644
index 0000000000..4a43af0d6e
--- /dev/null
+++ b/dts/Bindings/pinctrl/renesas,rzn1-pinctrl.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/renesas,rzn1-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/N1 Pin Controller
+
+maintainers:
+  - Gareth Williams <gareth.williams.jx@renesas.com>
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a06g032-pinctrl # RZ/N1D
+          - renesas,r9a06g033-pinctrl # RZ/N1S
+      - const: renesas,rzn1-pinctrl   # Generic RZ/N1
+
+  reg:
+    items:
+      - description: GPIO Multiplexing Level1 Register Block
+      - description: GPIO Multiplexing Level2 Register Block
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: bus
+    description:
+      The bus clock, sometimes described as pclk, for register accesses.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties:
+  anyOf:
+    - type: object
+      allOf:
+        - $ref: pincfg-node.yaml#
+        - $ref: pinmux-node.yaml#
+
+      description:
+        A pin multiplexing sub-node describes how to configure a set of (or a
+        single) pin in some desired alternate function mode.
+        A single sub-node may define several pin configurations.
+
+      properties:
+        pinmux:
+          description: |
+            Integer array representing pin number and pin multiplexing
+            configuration.
+            When a pin has to be configured in alternate function mode, use
+            this property to identify the pin by its global index, and provide
+            its alternate function configuration number along with it.
+            When multiple pins are required to be configured as part of the
+            same alternate function they shall be specified as members of the
+            same argument list of a single "pinmux" property.
+            Integers values in the "pinmux" argument list are assembled as:
+            (PIN | MUX_FUNC << 8)
+            where PIN directly corresponds to the pl_gpio pin number and
+            MUX_FUNC is one of the alternate function identifiers defined in:
+            <include/dt-bindings/pinctrl/rzn1-pinctrl.h>
+            These identifiers collapse the IO Multiplex Configuration Level 1
+            and Level 2 numbers that are detailed in the hardware reference
+            manual into a single number. The identifiers for Level 2 are simply
+            offset by 10.  Additional identifiers are provided to specify the
+            MDIO source peripheral.
+
+        phandle: true
+        bias-disable: true
+        bias-pull-up:
+          description: Pull up the pin with 50 kOhm
+        bias-pull-down:
+          description: Pull down the pin with 50 kOhm
+        bias-high-impedance: true
+        drive-strength:
+          enum: [ 4, 6, 8, 12 ]
+
+      required:
+        - pinmux
+
+      additionalProperties:
+        $ref: "#/additionalProperties/anyOf/0"
+
+    - type: object
+      properties:
+        phandle: true
+
+      additionalProperties:
+        $ref: "#/additionalProperties/anyOf/0"
+
+examples:
+  - |
+    #include <dt-bindings/clock/r9a06g032-sysctrl.h>
+    #include <dt-bindings/pinctrl/rzn1-pinctrl.h>
+    pinctrl: pinctrl@40067000 {
+            compatible = "renesas,r9a06g032-pinctrl", "renesas,rzn1-pinctrl";
+            reg = <0x40067000 0x1000>, <0x51000000 0x480>;
+            clocks = <&sysctrl R9A06G032_HCLK_PINCONFIG>;
+            clock-names = "bus";
+
+            /*
+             * A serial communication interface with a TX output pin and an RX
+             * input pin.
+             */
+            pins_uart0: pins_uart0 {
+                    pinmux = <
+                            RZN1_PINMUX(103, RZN1_FUNC_UART0_I) /* UART0_TXD */
+                            RZN1_PINMUX(104, RZN1_FUNC_UART0_I) /* UART0_RXD */
+                    >;
+            };
+
+            /*
+             * Set the pull-up on the RXD pin of the UART.
+             */
+            pins_uart0_alt: pins_uart0_alt {
+                    pinmux = <RZN1_PINMUX(103, RZN1_FUNC_UART0_I)>;
+
+                    pins_uart6_rx {
+                            pinmux = <RZN1_PINMUX(104, RZN1_FUNC_UART0_I)>;
+                            bias-pull-up;
+                    };
+            };
+    };
diff --git a/dts/Bindings/pinctrl/samsung-pinctrl.txt b/dts/Bindings/pinctrl/samsung-pinctrl.txt
index 70659c917b..7734ab6fec 100644
--- a/dts/Bindings/pinctrl/samsung-pinctrl.txt
+++ b/dts/Bindings/pinctrl/samsung-pinctrl.txt
@@ -65,7 +65,7 @@ Required Properties:
 
 - Pin mux/config groups as child nodes: The pin mux (selecting pin function
   mode) and pin config (pull up/down, driver strength) settings are represented
-  as child nodes of the pin-controller node. There should be atleast one
+  as child nodes of the pin-controller node. There should be at least one
   child node and there is no limit on the count of these child nodes. It is
   also possible for a child node to consist of several further child nodes
   to allow grouping multiple pinctrl groups into one. The format of second
@@ -75,7 +75,7 @@ Required Properties:
   The child node should contain a list of pin(s) on which a particular pin
   function selection or pin configuration (or both) have to applied. This
   list of pins is specified using the property name "samsung,pins". There
-  should be atleast one pin specfied for this property and there is no upper
+  should be at least one pin specified for this property and there is no upper
   limit on the count of pins that can be specified. The pins are specified
   using pin names which are derived from the hardware manual of the SoC. As
   an example, the pins in GPA0 bank of the pin controller can be represented
@@ -107,7 +107,7 @@ Required Properties:
   hardware manual and these values are programmed as-is into the pin
   pull up/down and driver strength register of the pin-controller.
 
-  Note: A child should include atleast a pin function selection property or
+  Note: A child should include at least a pin function selection property or
   pin configuration property (one or more) or both.
 
   The client nodes that require a particular pin function selection and/or
diff --git a/dts/Bindings/pinctrl/socionext,uniphier-pinctrl.yaml b/dts/Bindings/pinctrl/socionext,uniphier-pinctrl.yaml
index f8a93d8680..502480a19f 100644
--- a/dts/Bindings/pinctrl/socionext,uniphier-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/socionext,uniphier-pinctrl.yaml
@@ -28,6 +28,8 @@ properties:
 required:
   - compatible
 
+additionalProperties: false
+
 examples:
   - |
     // The UniPhier pinctrl should be a subnode of a "syscon" compatible node.
diff --git a/dts/Bindings/pinctrl/toshiba,visconti-pinctrl.yaml b/dts/Bindings/pinctrl/toshiba,visconti-pinctrl.yaml
new file mode 100644
index 0000000000..d0d1a01140
--- /dev/null
+++ b/dts/Bindings/pinctrl/toshiba,visconti-pinctrl.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/toshiba,visconti-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba Visconti TMPV770x pin mux/config controller
+
+maintainers:
+  - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+
+description:
+  Toshiba's Visconti ARM SoC a pin mux/config controller.
+
+properties:
+  compatible:
+    enum:
+      - toshiba,tmpv7708-pinctrl
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+patternProperties:
+  '-pins$':
+    type: object
+    description: |
+      A pinctrl node should contain at least one subnodes representing the
+      pinctrl groups available on the machine. Each subnode will list the
+      pins it needs, and how they should be configured, with regard to muxer
+      configuration, pullups, drive strength.
+    $ref: "pinmux-node.yaml"
+
+    properties:
+      function:
+        description:
+          Function to mux.
+        $ref: "/schemas/types.yaml#/definitions/string"
+        enum: [i2c0, i2c1, i2c2, i2c3, i2c4, i2c5, i2c6, i2c7, i2c8,
+          spi0, spi1, spi2, spi3, spi4, spi5, spi6,
+          uart0, uart1, uart2, uart3, pwm, pcmif_out, pcmif_in]
+
+      groups:
+        description:
+          Name of the pin group to use for the functions.
+        $ref: "/schemas/types.yaml#/definitions/string"
+        enum: [i2c0_grp, i2c1_grp, i2c2_grp, i2c3_grp, i2c4_grp,
+          i2c5_grp, i2c6_grp, i2c7_grp, i2c8_grp,
+          spi0_grp, spi0_cs0_grp, spi0_cs1_grp, spi0_cs2_grp,
+          spi1_grp, spi2_grp, spi3_grp, spi4_grp, spi5_grp, spi6_grp,
+          uart0_grp, uart1_grp, uart2_grp, uart3_grp,
+          pwm0_gpio4_grp, pwm0_gpio8_grp, pwm0_gpio12_grp,
+          pwm0_gpio16_grp, pwm1_gpio5_grp, pwm1_gpio9_grp,
+          pwm1_gpio13_grp, pwm1_gpio17_grp, pwm2_gpio6_grp,
+          pwm2_gpio10_grp, pwm2_gpio14_grp, pwm2_gpio18_grp,
+          pwm3_gpio7_grp, pwm3_gpio11_grp, pwm3_gpio15_grp,
+          pwm3_gpio19_grp, pcmif_out_grp, pcmif_in_grp]
+
+      drive-strength:
+        enum: [2, 4, 6, 8, 16, 24, 32]
+        default: 2
+        description:
+          Selects the drive strength for the specified pins, in mA.
+
+      bias-pull-up: true
+
+      bias-pull-down: true
+
+      bias-disable: true
+
+additionalProperties: false
+
+examples:
+  # Pinmux controller node
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pmux: pmux@24190000 {
+            compatible = "toshiba,tmpv7708-pinctrl";
+            reg = <0 0x24190000 0 0x10000>;
+
+            spi0_pins: spi0-pins {
+                function = "spi0";
+                groups = "spi0_grp";
+            };
+        };
+    };