diff options
Diffstat (limited to 'dts/Bindings/pinctrl')
202 files changed, 18449 insertions, 7367 deletions
diff --git a/dts/Bindings/pinctrl/actions,s500-pinctrl.yaml b/dts/Bindings/pinctrl/actions,s500-pinctrl.yaml index 3f94f69447..7cb8a747fe 100644 --- a/dts/Bindings/pinctrl/actions,s500-pinctrl.yaml +++ b/dts/Bindings/pinctrl/actions,s500-pinctrl.yaml @@ -184,6 +184,9 @@ patternProperties: additionalProperties: false +allOf: + - $ref: pinctrl.yaml# + required: - compatible - reg diff --git a/dts/Bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml b/dts/Bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml index cce63c3cc4..4502405703 100644 --- a/dts/Bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml +++ b/dts/Bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/pinctrl/allwinner,sun4i-a10-pinctrl.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Allwinner A10 Pin Controller Device Tree Bindings +title: Allwinner A10 Pin Controller maintainers: - Chen-Yu Tsai <wens@csie.org> @@ -46,6 +46,7 @@ properties: - allwinner,sun8i-v3s-pinctrl - allwinner,sun9i-a80-pinctrl - allwinner,sun9i-a80-r-pinctrl + - allwinner,sun20i-d1-pinctrl - allwinner,sun50i-a64-pinctrl - allwinner,sun50i-a64-r-pinctrl - allwinner,sun50i-a100-pinctrl @@ -80,9 +81,6 @@ properties: - const: hosc - const: losc - resets: - maxItems: 1 - gpio-controller: true interrupt-controller: true gpio-line-names: true @@ -99,7 +97,7 @@ patternProperties: # It's pretty scary, but the basic idea is that: # - One node name can start with either s- or r- for PRCM nodes, # - Then, the name itself can be any repetition of <string>- (to - # accomodate with nodes like uart4-rts-cts-pins), where each + # accommodate with nodes like uart4-rts-cts-pins), where each # string can be either starting with 'p' but in a string longer # than 3, or something that doesn't start with 'p', # - Then, the bank name is optional and will be between pa and pg, @@ -127,26 +125,37 @@ patternProperties: additionalProperties: false - "^vcc-p[a-hlm]-supply$": + "^vcc-p[a-ilm]-supply$": description: Power supplies for pin banks. required: - "#gpio-cells" - - "#interrupt-cells" - compatible - reg - - interrupts - clocks - clock-names - gpio-controller - - interrupt-controller allOf: # FIXME: We should have the pin bank supplies here, but not a lot of # boards are defining it at the moment so it would generate a lot of # warnings. + - $ref: pinctrl.yaml# + - if: + not: + properties: + compatible: + enum: + - allwinner,sun50i-h616-r-pinctrl + + then: + required: + - "#interrupt-cells" + - interrupts + - interrupt-controller + - if: properties: compatible: @@ -174,6 +183,18 @@ allOf: properties: compatible: enum: + - allwinner,sun20i-d1-pinctrl + + then: + properties: + interrupts: + minItems: 6 + maxItems: 6 + + - if: + properties: + compatible: + enum: - allwinner,sun9i-a80-pinctrl then: diff --git a/dts/Bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml b/dts/Bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml new file mode 100644 index 0000000000..c7df4cd341 --- /dev/null +++ b/dts/Bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/amlogic,meson-pinctrl-a1.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Meson A1 pinmux controller + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +allOf: + - $ref: amlogic,meson-pinctrl-common.yaml# + +properties: + compatible: + enum: + - amlogic,c3-periphs-pinctrl + - amlogic,t7-periphs-pinctrl + - amlogic,meson-a1-periphs-pinctrl + - amlogic,meson-s4-periphs-pinctrl + +required: + - compatible + +patternProperties: + "^bank@[0-9a-z]+$": + $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio + + unevaluatedProperties: false + + properties: + reg: + maxItems: 2 + + reg-names: + items: + - const: mux + - const: gpio + + gpio-line-names: + minItems: 62 # A1 + maxItems: 82 # S4 + +unevaluatedProperties: + type: object + $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-pins + +examples: + - | + periphs_pinctrl: pinctrl { + compatible = "amlogic,meson-a1-periphs-pinctrl"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + bank@400 { + reg = <0x0400 0x003c>, + <0x0480 0x0118>; + reg-names = "mux", "gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 0 62>; + }; + + cec_ao_a_h_pins: cec_ao_a_h { + mux { + groups = "cec_ao_a_h"; + function = "cec_ao_a_h"; + bias-disable; + }; + }; + }; diff --git a/dts/Bindings/pinctrl/amlogic,meson-pinctrl-common.yaml b/dts/Bindings/pinctrl/amlogic,meson-pinctrl-common.yaml new file mode 100644 index 0000000000..e707c222a0 --- /dev/null +++ b/dts/Bindings/pinctrl/amlogic,meson-pinctrl-common.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/amlogic,meson-pinctrl-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Meson pinmux controller + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +allOf: + - $ref: pinctrl.yaml# + +properties: + ranges: true + + "#address-cells": + enum: [1, 2] + + "#size-cells": + enum: [1, 2] + +required: + - ranges + - "#address-cells" + - "#size-cells" + +additionalProperties: true + +$defs: + meson-gpio: + type: object + + properties: + gpio-controller: true + + "#gpio-cells": + const: 2 + + gpio-ranges: + maxItems: 1 + + patternProperties: + "^.+-hog(-[0-9]+)?$": + type: object + + required: + - gpio-hog + + required: + - reg + - reg-names + - gpio-controller + - "#gpio-cells" + - gpio-ranges + + meson-pins: + type: object + additionalProperties: + type: object + allOf: + - $ref: pincfg-node.yaml# + - $ref: pinmux-node.yaml# diff --git a/dts/Bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml b/dts/Bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml new file mode 100644 index 0000000000..0942ea60c6 --- /dev/null +++ b/dts/Bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Meson G12 AOBUS pinmux controller + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +allOf: + - $ref: amlogic,meson-pinctrl-common.yaml# + +properties: + compatible: + enum: + - amlogic,meson-g12a-aobus-pinctrl + +required: + - compatible + +patternProperties: + "^bank@[0-9a-z]+$": + $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio + + unevaluatedProperties: false + + properties: + reg: + maxItems: 3 + + reg-names: + items: + - const: mux + - const: ds + - const: gpio + + gpio-line-names: + maxItems: 15 + +unevaluatedProperties: + type: object + $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-pins + +examples: + - | + ao_pinctrl: pinctrl { + compatible = "amlogic,meson-g12a-aobus-pinctrl"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + bank@14 { + reg = <0x14 0x8>, + <0x1c 0x8>, + <0x24 0x14>; + reg-names = "mux", "ds", "gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&ao_pinctrl 0 0 15>; + }; + + cec_ao_a_h_pins: cec_ao_a_h { + mux { + groups = "cec_ao_a_h"; + function = "cec_ao_a_h"; + bias-disable; + }; + }; + }; diff --git a/dts/Bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml b/dts/Bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml new file mode 100644 index 0000000000..e3c8bde305 --- /dev/null +++ b/dts/Bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Meson G12 PERIPHS pinmux controller + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +allOf: + - $ref: amlogic,meson-pinctrl-common.yaml# + +properties: + compatible: + enum: + - amlogic,meson-g12a-periphs-pinctrl + +required: + - compatible + +patternProperties: + "^bank@[0-9a-z]+$": + $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio + + unevaluatedProperties: false + + properties: + reg: + maxItems: 5 + + reg-names: + items: + - const: gpio + - const: pull + - const: pull-enable + - const: mux + - const: ds + + gpio-line-names: + maxItems: 85 + +unevaluatedProperties: + type: object + $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-pins + +examples: + - | + periphs_pinctrl: pinctrl { + compatible = "amlogic,meson-g12a-periphs-pinctrl"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + bank@40 { + reg = <0x40 0x4c>, + <0xe8 0x18>, + <0x120 0x18>, + <0x2c0 0x40>, + <0x340 0x1c>; + reg-names = "gpio", "pull", "pull-enable", "mux", "ds"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 0 86>; + }; + + cec_ao_a_h_pins: cec_ao_a_h { + mux { + groups = "cec_ao_a_h"; + function = "cec_ao_a_h"; + bias-disable; + }; + }; + }; diff --git a/dts/Bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml b/dts/Bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml new file mode 100644 index 0000000000..c1b03147e8 --- /dev/null +++ b/dts/Bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/amlogic,meson8-pinctrl-aobus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Meson8 AOBUS pinmux controller + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +allOf: + - $ref: amlogic,meson-pinctrl-common.yaml# + +properties: + compatible: + oneOf: + - enum: + - amlogic,meson8-aobus-pinctrl + - amlogic,meson8b-aobus-pinctrl + - amlogic,meson-gxbb-aobus-pinctrl + - amlogic,meson-gxl-aobus-pinctrl + - amlogic,meson-axg-aobus-pinctrl + - items: + - const: amlogic,meson8m2-aobus-pinctrl + - const: amlogic,meson8-aobus-pinctrl + +required: + - compatible + +patternProperties: + "^bank@[0-9a-z]+$": + $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio + + unevaluatedProperties: false + + properties: + reg: + maxItems: 3 + + reg-names: + items: + - const: mux + - const: pull + - const: gpio + + gpio-line-names: + minItems: 11 # GXL + maxItems: 16 # Meson8 + +unevaluatedProperties: + type: object + $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-pins + +examples: + - | + pinctrl_aobus: pinctrl { + compatible = "amlogic,meson8-aobus-pinctrl"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + bank@14 { + reg = <0x14 0x4>, + <0x2c 0x4>, + <0x24 0x8>; + reg-names = "mux", "pull", "gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl_aobus 0 0 16>; + }; + + cec_ao_a_h_pins: cec_ao_a_h { + mux { + groups = "cec_ao_a_h"; + function = "cec_ao_a_h"; + bias-disable; + }; + }; + }; diff --git a/dts/Bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml b/dts/Bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml new file mode 100644 index 0000000000..4ec85b8248 --- /dev/null +++ b/dts/Bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/amlogic,meson8-pinctrl-cbus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Meson8 CBUS pinmux controller + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +allOf: + - $ref: amlogic,meson-pinctrl-common.yaml# + +properties: + compatible: + oneOf: + - enum: + - amlogic,meson8-cbus-pinctrl + - amlogic,meson8b-cbus-pinctrl + - amlogic,meson-gxbb-periphs-pinctrl + - amlogic,meson-gxl-periphs-pinctrl + - amlogic,meson-axg-periphs-pinctrl + - items: + - const: amlogic,meson8m2-cbus-pinctrl + - const: amlogic,meson8-cbus-pinctrl + +required: + - compatible + +patternProperties: + "^bank@[0-9a-z]+$": + $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio + + unevaluatedProperties: false + + properties: + reg: + maxItems: 4 + + reg-names: + items: + - const: mux + - const: pull + - const: pull-enable + - const: gpio + + gpio-line-names: + minItems: 86 # AXG + maxItems: 120 # Meson8 + +unevaluatedProperties: + type: object + $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-pins + +examples: + - | + pinctrl_cbus: pinctrl { + compatible = "amlogic,meson8-cbus-pinctrl"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + bank@80b0 { + reg = <0x80b0 0x28>, + <0x80e8 0x18>, + <0x8120 0x18>, + <0x8030 0x30>; + reg-names = "mux", "pull", "pull-enable", "gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl_cbus 0 0 120>; + }; + + cec_ao_a_h_pins: cec_ao_a_h { + mux { + groups = "cec_ao_a_h"; + function = "cec_ao_a_h"; + bias-disable; + }; + }; + }; diff --git a/dts/Bindings/pinctrl/apple,pinctrl.yaml b/dts/Bindings/pinctrl/apple,pinctrl.yaml index d50571affd..9c07935919 100644 --- a/dts/Bindings/pinctrl/apple,pinctrl.yaml +++ b/dts/Bindings/pinctrl/apple,pinctrl.yaml @@ -17,7 +17,10 @@ description: | properties: compatible: items: - - const: apple,t8103-pinctrl + - enum: + - apple,t8103-pinctrl + - apple,t8112-pinctrl + - apple,t6000-pinctrl - const: apple,pinctrl reg: @@ -34,6 +37,10 @@ properties: gpio-ranges: maxItems: 1 + apple,npins: + $ref: /schemas/types.yaml#/definitions/uint32 + description: The number of pins in this GPIO controller. + interrupts: description: One interrupt for each of the (up to 7) interrupt groups supported by the controller sorted by interrupt group @@ -43,6 +50,12 @@ properties: interrupt-controller: true + '#interrupt-cells': + const: 2 + + power-domains: + maxItems: 1 + patternProperties: '-pins$': type: object @@ -60,12 +73,16 @@ patternProperties: additionalProperties: false +allOf: + - $ref: pinctrl.yaml# + required: - compatible - reg - gpio-controller - '#gpio-cells' - gpio-ranges + - apple,npins additionalProperties: false @@ -86,8 +103,10 @@ examples: gpio-controller; #gpio-cells = <2>; gpio-ranges = <&pinctrl 0 0 212>; + apple,npins = <212>; interrupt-controller; + #interrupt-cells = <2>; interrupt-parent = <&aic>; interrupts = <AIC_IRQ 16 IRQ_TYPE_LEVEL_HIGH>, <AIC_IRQ 17 IRQ_TYPE_LEVEL_HIGH>, diff --git a/dts/Bindings/pinctrl/aspeed,ast2400-pinctrl.yaml b/dts/Bindings/pinctrl/aspeed,ast2400-pinctrl.yaml index 100bb6dea3..37c0a74c7c 100644 --- a/dts/Bindings/pinctrl/aspeed,ast2400-pinctrl.yaml +++ b/dts/Bindings/pinctrl/aspeed,ast2400-pinctrl.yaml @@ -16,7 +16,7 @@ description: |+ - compatible: Should be one of the following: "aspeed,ast2400-scu", "syscon", "simple-mfd" - Refer to the the bindings described in + Refer to the bindings described in Documentation/devicetree/bindings/mfd/syscon.yaml properties: @@ -25,41 +25,50 @@ properties: reg: maxItems: 2 -patternProperties: - '^.*$': - if: - type: object - then: - patternProperties: - "^function|groups$": - $ref: "/schemas/types.yaml#/definitions/string" - enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, - ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT, - EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2, GPID4, GPID6, GPIE0, - GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, - I2C5, I2C6, I2C7, I2C8, I2C9, LPCPD, LPCPME, LPCRST, LPCSMI, MAC1LINK, - MAC2LINK, MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, - NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, - NDTS4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, OSCCLK, PWM0, - PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, - RMII2, ROM16, ROM8, ROMCS1, ROMCS2, ROMCS3, ROMCS4, RXD1, RXD2, RXD3, - RXD4, SALT1, SALT2, SALT3, SALT4, SD1, SD2, SGPMCK, SGPMI, SGPMLD, - SGPMO, SGPSCK, SGPSI0, SGPSI1, SGPSLD, SIOONCTRL, SIOPBI, SIOPBO, - SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1DEBUG, SPI1PASSTHRU, - SPICS1, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, - TXD3, TXD4, UART6, USB11D1, USB11H2, USB2D1, USB2H1, USBCKI, VGABIOS_ROM, - VGAHS, VGAVS, VPI18, VPI24, VPI30, VPO12, VPO24, WDTRST1, WDTRST2] +additionalProperties: + $ref: pinmux-node.yaml# + additionalProperties: false + + properties: + pins: true + bias-disable: true + + patternProperties: + "^function|groups$": + enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, + ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT, + EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2, GPID4, GPID6, GPIE0, + GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, + I2C5, I2C6, I2C7, I2C8, I2C9, LPCPD, LPCPME, LPCRST, LPCSMI, MAC1LINK, + MAC2LINK, MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, + NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, + NDTS4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, OSCCLK, PWM0, + PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, + RMII2, ROM16, ROM8, ROMCS1, ROMCS2, ROMCS3, ROMCS4, RXD1, RXD2, RXD3, + RXD4, SALT1, SALT2, SALT3, SALT4, SD1, SD2, SGPMCK, SGPMI, SGPMLD, + SGPMO, SGPSCK, SGPSI0, SGPSI1, SGPSLD, SIOONCTRL, SIOPBI, SIOPBO, + SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1DEBUG, SPI1PASSTHRU, + SPICS1, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, + TXD3, TXD4, UART6, USB11D1, USB11H2, USB2D1, USB2H1, USBCKI, VGABIOS_ROM, + VGAHS, VGAVS, VPI18, VPI24, VPI30, VPO12, VPO24, WDTRST1, WDTRST2] + +allOf: + - $ref: pinctrl.yaml# required: - compatible -additionalProperties: false - examples: - | syscon: scu@1e6e2000 { compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd"; reg = <0x1e6e2000 0x1a8>; + #clock-cells = <1>; + #reset-cells = <1>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1e6e2000 0x1000>; pinctrl: pinctrl { compatible = "aspeed,ast2400-pinctrl"; diff --git a/dts/Bindings/pinctrl/aspeed,ast2500-pinctrl.yaml b/dts/Bindings/pinctrl/aspeed,ast2500-pinctrl.yaml index 904697bc94..863da5d808 100644 --- a/dts/Bindings/pinctrl/aspeed,ast2500-pinctrl.yaml +++ b/dts/Bindings/pinctrl/aspeed,ast2500-pinctrl.yaml @@ -17,7 +17,7 @@ description: |+ "aspeed,ast2500-scu", "syscon", "simple-mfd" "aspeed,g5-scu", "syscon", "simple-mfd" - Refer to the the bindings described in + Refer to the bindings described in Documentation/devicetree/bindings/mfd/syscon.yaml properties: @@ -29,99 +29,75 @@ properties: aspeed,external-nodes: minItems: 2 maxItems: 2 + items: + maxItems: 1 $ref: /schemas/types.yaml#/definitions/phandle-array description: | A cell of phandles to external controller nodes: 0: compatible with "aspeed,ast2500-gfx", "syscon" 1: compatible with "aspeed,ast2500-lhc", "syscon" -patternProperties: - '^.*$': - if: - type: object - then: - patternProperties: - "^function|groups$": - $ref: "/schemas/types.yaml#/definitions/string" - enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, - ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT, - ESPI, FWSPICS1, FWSPICS2, GPID0, GPID2, GPID4, GPID6, GPIE0, GPIE2, - GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, I2C5, - I2C6, I2C7, I2C8, I2C9, LAD0, LAD1, LAD2, LAD3, LCLK, LFRAME, LPCHC, - LPCPD, LPCPLUS, LPCPME, LPCRST, LPCSMI, LSIRQ, MAC1LINK, MAC2LINK, - MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, - NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, - NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PNOR, PWM0, - PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, - RMII2, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, - SALT14, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9, SCL1, - SCL2, SD1, SD2, SDA1, SDA2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO, - SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1CS1, SPI1DEBUG, - SPI1PASSTHRU, SPI2CK, SPI2CS0, SPI2CS1, SPI2MISO, SPI2MOSI, TIMER3, - TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, TXD3, TXD4, UART6, - USB11BHID, USB2AD, USB2AH, USB2BD, USB2BH, USBCKI, VGABIOSROM, VGAHS, - VGAVS, VPI24, VPO, WDTRST1, WDTRST2] +additionalProperties: + $ref: pinmux-node.yaml# + additionalProperties: false + + properties: + pins: true + bias-disable: true + + patternProperties: + "^function|groups$": + enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, + ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT, + ESPI, FWSPICS1, FWSPICS2, GPID0, GPID2, GPID4, GPID6, GPIE0, GPIE2, + GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, I2C5, + I2C6, I2C7, I2C8, I2C9, LAD0, LAD1, LAD2, LAD3, LCLK, LFRAME, LPCHC, + LPCPD, LPCPLUS, LPCPME, LPCRST, LPCSMI, LSIRQ, MAC1LINK, MAC2LINK, + MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, + NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, + NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PNOR, PWM0, + PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, + RMII2, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, + SALT14, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9, SCL1, + SCL2, SD1, SD2, SDA1, SDA2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO, + SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1CS1, SPI1DEBUG, + SPI1PASSTHRU, SPI2CK, SPI2CS0, SPI2CS1, SPI2MISO, SPI2MOSI, TIMER3, + TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, TXD3, TXD4, UART6, + USB11BHID, USB2AD, USB2AH, USB2BD, USB2BH, USBCKI, VGABIOSROM, VGAHS, + VGAVS, VPI24, VPO, WDTRST1, WDTRST2] + +allOf: + - $ref: pinctrl.yaml# required: - compatible - aspeed,external-nodes -additionalProperties: false - examples: - | - apb { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - syscon: scu@1e6e2000 { - compatible = "aspeed,ast2500-scu", "syscon", "simple-mfd"; - reg = <0x1e6e2000 0x1a8>; - - pinctrl: pinctrl { - compatible = "aspeed,ast2500-pinctrl"; - aspeed,external-nodes = <&gfx>, <&lhc>; - - pinctrl_i2c3_default: i2c3_default { - function = "I2C3"; - groups = "I2C3"; - }; - - pinctrl_gpioh0_unbiased_default: gpioh0 { - pins = "A18"; - bias-disable; - }; - }; - }; - - gfx: display@1e6e6000 { - compatible = "aspeed,ast2500-gfx", "syscon"; - reg = <0x1e6e6000 0x1000>; - }; - }; - - lpc: lpc@1e789000 { - compatible = "aspeed,ast2500-lpc", "simple-mfd"; - reg = <0x1e789000 0x1000>; + #include <dt-bindings/clock/aspeed-clock.h> + scu@1e6e2000 { + compatible = "aspeed,ast2500-scu", "syscon", "simple-mfd"; + reg = <0x1e6e2000 0x1a8>; + #clock-cells = <1>; + #reset-cells = <1>; #address-cells = <1>; #size-cells = <1>; - ranges = <0x0 0x1e789000 0x1000>; + ranges = <0x0 0x1e6e2000 0x1000>; - lpc_host: lpc-host@80 { - compatible = "aspeed,ast2500-lpc-host", "simple-mfd", "syscon"; - reg = <0x80 0x1e0>; - reg-io-width = <4>; + pinctrl: pinctrl { + compatible = "aspeed,ast2500-pinctrl"; + aspeed,external-nodes = <&gfx>, <&lhc>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x80 0x1e0>; + pinctrl_i2c3_default: i2c3_default { + function = "I2C3"; + groups = "I2C3"; + }; - lhc: lhc@20 { - compatible = "aspeed,ast2500-lhc"; - reg = <0x20 0x24>, <0x48 0x8>; + pinctrl_gpioh0_unbiased_default: gpioh0 { + pins = "A18"; + bias-disable; }; }; }; diff --git a/dts/Bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/dts/Bindings/pinctrl/aspeed,ast2600-pinctrl.yaml index ad2866c997..612464aef9 100644 --- a/dts/Bindings/pinctrl/aspeed,ast2600-pinctrl.yaml +++ b/dts/Bindings/pinctrl/aspeed,ast2600-pinctrl.yaml @@ -16,83 +16,90 @@ description: |+ - compatible: Should be one of the following: "aspeed,ast2600-scu", "syscon", "simple-mfd" - Refer to the the bindings described in + Refer to the bindings described in Documentation/devicetree/bindings/mfd/syscon.yaml properties: compatible: const: aspeed,ast2600-pinctrl -patternProperties: - '^.*$': - if: - type: object - then: - properties: - function: - $ref: "/schemas/types.yaml#/definitions/string" - enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, - ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC, ESPI, ESPIALT, - FSI1, FSI2, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3, - GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5, - GPIU6, GPIU7, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, - I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, - I3C6, JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, - MACLINK1, MACLINK2, MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, - NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, - NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, - NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PWM0, PWM1, PWM10, PWM11, - PWM12, PWM13, PWM14, PWM15, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, PWM8, - PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4, - RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, SALT14, - SALT15, SALT16, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, - SALT9, SD1, SD2, SGPM1, SGPM2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO, - SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1, SPI1WP, SPI2, - SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, TACH12, TACH13, TACH14, - TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, - THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12, - UART13, UART6, UART7, UART8, UART9, USBAD, USBADP, USB2AH, USB2AHP, - USB2BD, USB2BH, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4 ] - - groups: - $ref: "/schemas/types.yaml#/definitions/string" - enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, - ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, EMMCG4, - EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWQSPID, FWSPIWP, - GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, - GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, HVI3C3, HVI3C4, I2C1, I2C10, - I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, - I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ, - LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, MACLINK3, - MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, NCTS3, NCTS4, - NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, - NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, - OSCCLK, PEWAKE, PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1, PWM12G0, - PWM12G1, PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0, PWM15G1, PWM2, - PWM3, PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1, PWM9G0, PWM9G1, QSPI1, - QSPI2, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4, - RXD1, RXD2, RXD3, RXD4, SALT1, SALT10G0, SALT10G1, SALT11G0, SALT11G1, - SALT12G0, SALT12G1, SALT13G0, SALT13G1, SALT14G0, SALT14G1, SALT15G0, - SALT15G1, SALT16G0, SALT16G1, SALT2, SALT3, SALT4, SALT5, SALT6, - SALT7, SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPM2, SGPS1, SGPS2, - SIOONCTRL, SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, - SPI1ABR, SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, - TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, - TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, - TXD4, UART10, UART11, UART12G0, UART12G1, UART13G0, UART13G1, UART6, - UART7, UART8, UART9, USBA, USBB, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, - WDTRST3, WDTRST4] +additionalProperties: + $ref: pinmux-node.yaml# + additionalProperties: false + + properties: + function: + enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, + ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC, ESPI, ESPIALT, + FSI1, FSI2, FWQSPI, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3, + GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5, + GPIU6, GPIU7, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, + I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, + I3C6, JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, + MACLINK1, MACLINK2, MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, + NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, + NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, + NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PWM0, PWM1, PWM10, PWM11, + PWM12, PWM13, PWM14, PWM15, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, PWM8, + PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4, + RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, SALT14, + SALT15, SALT16, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, + SALT9, SD1, SD2, SGPM1, SGPM2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO, + SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1, SPI1WP, SPI2, + SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, TACH12, TACH13, TACH14, + TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, + THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12, + UART13, UART6, UART7, UART8, UART9, USBAD, USBADP, USB2AH, USB2AHP, + USB2BD, USB2BH, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4 ] + + groups: + enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, + ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, EMMCG4, + EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWQSPI, FWSPIABR, FWSPID, FWSPIWP, + GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, + GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, HVI3C3, HVI3C4, I2C1, I2C10, + I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, + I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ, + LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, MACLINK3, + MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, NCTS3, NCTS4, + NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, + NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, + OSCCLK, PEWAKE, PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1, PWM12G0, + PWM12G1, PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0, PWM15G1, PWM2, + PWM3, PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1, PWM9G0, PWM9G1, QSPI1, + QSPI2, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4, + RXD1, RXD2, RXD3, RXD4, SALT1, SALT10G0, SALT10G1, SALT11G0, SALT11G1, + SALT12G0, SALT12G1, SALT13G0, SALT13G1, SALT14G0, SALT14G1, SALT15G0, + SALT15G1, SALT16G0, SALT16G1, SALT2, SALT3, SALT4, SALT5, SALT6, + SALT7, SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPM2, SGPS1, SGPS2, + SIOONCTRL, SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, + SPI1ABR, SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, + TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, + TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, + TXD4, UART10, UART11, UART12G0, UART12G1, UART13G0, UART13G1, UART6, + UART7, UART8, UART9, USBA, USBB, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, + WDTRST3, WDTRST4] + + pins: true + bias-disable: true + +allOf: + - $ref: pinctrl.yaml# required: - compatible -additionalProperties: false - examples: - | syscon: scu@1e6e2000 { compatible = "aspeed,ast2600-scu", "syscon", "simple-mfd"; reg = <0x1e6e2000 0xf6c>; + #clock-cells = <1>; + #reset-cells = <1>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1e6e2000 0x1000>; pinctrl: pinctrl { compatible = "aspeed,ast2600-pinctrl"; diff --git a/dts/Bindings/pinctrl/atmel,at91-pio4-pinctrl.txt b/dts/Bindings/pinctrl/atmel,at91-pio4-pinctrl.txt index e2b861ce16..774c3c269c 100644 --- a/dts/Bindings/pinctrl/atmel,at91-pio4-pinctrl.txt +++ b/dts/Bindings/pinctrl/atmel,at91-pio4-pinctrl.txt @@ -37,7 +37,8 @@ right representation of the pin. Optional properties: - GENERIC_PINCONFIG: generic pinconfig options to use: - bias-disable, bias-pull-down, bias-pull-up, drive-open-drain, - input-schmitt-enable, input-debounce, output-low, output-high. + drive-push-pull input-schmitt-enable, input-debounce, output-low, + output-high. - for microchip,sama7g5-pinctrl only: - slew-rate: 0 - disabled, 1 - enabled (default) - atmel,drive-strength: 0 or 1 for low drive, 2 for medium drive and 3 for diff --git a/dts/Bindings/pinctrl/brcm,bcm11351-pinctrl.txt b/dts/Bindings/pinctrl/brcm,bcm11351-pinctrl.txt deleted file mode 100644 index 4eaae32821..0000000000 --- a/dts/Bindings/pinctrl/brcm,bcm11351-pinctrl.txt +++ /dev/null @@ -1,461 +0,0 @@ -Broadcom BCM281xx Pin Controller - -This is a pin controller for the Broadcom BCM281xx SoC family, which includes -BCM11130, BCM11140, BCM11351, BCM28145, and BCM28155 SoCs. - -=== Pin Controller Node === - -Required Properties: - -- compatible: Must be "brcm,bcm11351-pinctrl" -- reg: Base address of the PAD Controller register block and the size - of the block. - -For example, the following is the bare minimum node: - - pinctrl@35004800 { - compatible = "brcm,bcm11351-pinctrl"; - reg = <0x35004800 0x430>; - }; - -As a pin controller device, in addition to the required properties, this node -should also contain the pin configuration nodes that client devices reference, -if any. - -=== Pin Configuration Node === - -Each pin configuration node is a sub-node of the pin controller node and is a -container of an arbitrary number of subnodes, called pin group nodes in this -document. - -Please refer to the pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the definition of a -"pin configuration node". - -=== Pin Group Node === - -A pin group node specifies the desired pin mux and/or pin configuration for an -arbitrary number of pins. The name of the pin group node is optional and not -used. - -A pin group node only affects the properties specified in the node, and has no -effect on any properties that are omitted. - -The pin group node accepts a subset of the generic pin config properties. For -details generic pin config properties, please refer to pinctrl-bindings.txt -and <include/linux/pinctrl/pinconfig-generic.h>. - -Each pin controlled by this pin controller belong to one of three types: -Standard, I2C, and HDMI. Each type accepts a different set of pin config -properties. A list of pins and their types is provided below. - -Required Properties (applicable to all pins): - -- pins: Multiple strings. Specifies the name(s) of one or more pins to - be configured by this node. - -Optional Properties (for standard pins): - -- function: String. Specifies the pin mux selection. Values - must be one of: "alt1", "alt2", "alt3", "alt4" -- input-schmitt-enable: No arguments. Enable schmitt-trigger mode. -- input-schmitt-disable: No arguments. Disable schmitt-trigger mode. -- bias-pull-up: No arguments. Pull up on pin. -- bias-pull-down: No arguments. Pull down on pin. -- bias-disable: No arguments. Disable pin bias. -- slew-rate: Integer. Meaning depends on configured pin mux: - *_SCL or *_SDA: - 0: Standard(100kbps)& Fast(400kbps) mode - 1: Highspeed (3.4Mbps) mode - IC_DM or IC_DP: - 0: normal slew rate - 1: fast slew rate - Otherwise: - 0: fast slew rate - 1: normal slew rate -- input-enable: No arguments. Enable input (does not affect - output.) -- input-disable: No arguments. Disable input (does not affect - output.) -- drive-strength: Integer. Drive strength in mA. Valid values are - 2, 4, 6, 8, 10, 12, 14, 16 mA. - -Optional Properties (for I2C pins): - -- function: String. Specifies the pin mux selection. Values - must be one of: "alt1", "alt2", "alt3", "alt4" -- bias-pull-up: Integer. Pull up strength in Ohm. There are 3 - pull-up resisitors (1.2k, 1.8k, 2.7k) available - in parallel for I2C pins, so the valid values - are: 568, 720, 831, 1080, 1200, 1800, 2700 Ohm. -- bias-disable: No arguments. Disable pin bias. -- slew-rate: Integer. Meaning depends on configured pin mux: - *_SCL or *_SDA: - 0: Standard(100kbps)& Fast(400kbps) mode - 1: Highspeed (3.4Mbps) mode - IC_DM or IC_DP: - 0: normal slew rate - 1: fast slew rate - Otherwise: - 0: fast slew rate - 1: normal slew rate -- input-enable: No arguments. Enable input (does not affect - output.) -- input-disable: No arguments. Disable input (does not affect - output.) - -Optional Properties (for HDMI pins): - -- function: String. Specifies the pin mux selection. Values - must be one of: "alt1", "alt2", "alt3", "alt4" -- slew-rate: Integer. Controls slew rate. - 0: Standard(100kbps)& Fast(400kbps) mode - 1: Highspeed (3.4Mbps) mode -- input-enable: No arguments. Enable input (does not affect - output.) -- input-disable: No arguments. Disable input (does not affect - output.) - -Example: -// pin controller node -pinctrl@35004800 { - compatible = "brcm,bcm11351-pinctrl"; - reg = <0x35004800 0x430>; - - // pin configuration node - dev_a_default: dev_a_active { - //group node defining 1 standard pin - grp_1 { - pins = "std_pin1"; - function = "alt1"; - input-schmitt-enable; - bias-disable; - slew-rate = <1>; - drive-strength = <4>; - }; - - // group node defining 2 I2C pins - grp_2 { - pins = "i2c_pin1", "i2c_pin2"; - function = "alt2"; - bias-pull-up = <720>; - input-enable; - }; - - // group node defining 2 HDMI pins - grp_3 { - pins = "hdmi_pin1", "hdmi_pin2"; - function = "alt3"; - slew-rate = <1>; - }; - - // other pin group nodes - ... - }; - - // other pin configuration nodes - ... -}; - -In the example above, "dev_a_active" is a pin configuration node with a number -of sub-nodes. In the pin group node "grp_1", one pin, "std_pin1", is defined in -the "pins" property. Thus, the remaining properties in the "grp_1" node applies -only to this pin, including the following settings: - - setting pinmux to "alt1" - - enabling schmitt-trigger (hystersis) mode - - disabling pin bias - - setting the slew-rate to 1 - - setting the drive strength to 4 mA -Note that neither "input-enable" nor "input-disable" was specified - the pinctrl -subsystem will therefore leave this property unchanged from whatever state it -was in before applying these changes. - -The "pins" property in the pin group node "grp_2" specifies two pins - -"i2c_pin1" and "i2c_pin2"; the remaining properties in this pin group node, -therefore, applies to both of these pins. The properties include: - - setting pinmux to "alt2" - - setting pull-up resistance to 720 Ohm (ie. enabling 1.2k and 1.8k resistors - in parallel) - - enabling both pins' input -"slew-rate" is not specified in this pin group node, so the slew-rate for these -pins are left as-is. - -Finally, "grp_3" defines two HDMI pins. The following properties are applied to -both pins: - - setting pinmux to "alt3" - - setting slew-rate to 1; for HDMI pins, this corresponds to the 3.4 Mbps - Highspeed mode -The input is neither enabled or disabled, and is left untouched. - -=== Pin Names and Type === - -The following are valid pin names and their pin types: - - "adcsync", Standard - "bat_rm", Standard - "bsc1_scl", I2C - "bsc1_sda", I2C - "bsc2_scl", I2C - "bsc2_sda", I2C - "classgpwr", Standard - "clk_cx8", Standard - "clkout_0", Standard - "clkout_1", Standard - "clkout_2", Standard - "clkout_3", Standard - "clkreq_in_0", Standard - "clkreq_in_1", Standard - "cws_sys_req1", Standard - "cws_sys_req2", Standard - "cws_sys_req3", Standard - "digmic1_clk", Standard - "digmic1_dq", Standard - "digmic2_clk", Standard - "digmic2_dq", Standard - "gpen13", Standard - "gpen14", Standard - "gpen15", Standard - "gpio00", Standard - "gpio01", Standard - "gpio02", Standard - "gpio03", Standard - "gpio04", Standard - "gpio05", Standard - "gpio06", Standard - "gpio07", Standard - "gpio08", Standard - "gpio09", Standard - "gpio10", Standard - "gpio11", Standard - "gpio12", Standard - "gpio13", Standard - "gpio14", Standard - "gps_pablank", Standard - "gps_tmark", Standard - "hdmi_scl", HDMI - "hdmi_sda", HDMI - "ic_dm", Standard - "ic_dp", Standard - "kp_col_ip_0", Standard - "kp_col_ip_1", Standard - "kp_col_ip_2", Standard - "kp_col_ip_3", Standard - "kp_row_op_0", Standard - "kp_row_op_1", Standard - "kp_row_op_2", Standard - "kp_row_op_3", Standard - "lcd_b_0", Standard - "lcd_b_1", Standard - "lcd_b_2", Standard - "lcd_b_3", Standard - "lcd_b_4", Standard - "lcd_b_5", Standard - "lcd_b_6", Standard - "lcd_b_7", Standard - "lcd_g_0", Standard - "lcd_g_1", Standard - "lcd_g_2", Standard - "lcd_g_3", Standard - "lcd_g_4", Standard - "lcd_g_5", Standard - "lcd_g_6", Standard - "lcd_g_7", Standard - "lcd_hsync", Standard - "lcd_oe", Standard - "lcd_pclk", Standard - "lcd_r_0", Standard - "lcd_r_1", Standard - "lcd_r_2", Standard - "lcd_r_3", Standard - "lcd_r_4", Standard - "lcd_r_5", Standard - "lcd_r_6", Standard - "lcd_r_7", Standard - "lcd_vsync", Standard - "mdmgpio0", Standard - "mdmgpio1", Standard - "mdmgpio2", Standard - "mdmgpio3", Standard - "mdmgpio4", Standard - "mdmgpio5", Standard - "mdmgpio6", Standard - "mdmgpio7", Standard - "mdmgpio8", Standard - "mphi_data_0", Standard - "mphi_data_1", Standard - "mphi_data_2", Standard - "mphi_data_3", Standard - "mphi_data_4", Standard - "mphi_data_5", Standard - "mphi_data_6", Standard - "mphi_data_7", Standard - "mphi_data_8", Standard - "mphi_data_9", Standard - "mphi_data_10", Standard - "mphi_data_11", Standard - "mphi_data_12", Standard - "mphi_data_13", Standard - "mphi_data_14", Standard - "mphi_data_15", Standard - "mphi_ha0", Standard - "mphi_hat0", Standard - "mphi_hat1", Standard - "mphi_hce0_n", Standard - "mphi_hce1_n", Standard - "mphi_hrd_n", Standard - "mphi_hwr_n", Standard - "mphi_run0", Standard - "mphi_run1", Standard - "mtx_scan_clk", Standard - "mtx_scan_data", Standard - "nand_ad_0", Standard - "nand_ad_1", Standard - "nand_ad_2", Standard - "nand_ad_3", Standard - "nand_ad_4", Standard - "nand_ad_5", Standard - "nand_ad_6", Standard - "nand_ad_7", Standard - "nand_ale", Standard - "nand_cen_0", Standard - "nand_cen_1", Standard - "nand_cle", Standard - "nand_oen", Standard - "nand_rdy_0", Standard - "nand_rdy_1", Standard - "nand_wen", Standard - "nand_wp", Standard - "pc1", Standard - "pc2", Standard - "pmu_int", Standard - "pmu_scl", I2C - "pmu_sda", I2C - "rfst2g_mtsloten3g", Standard - "rgmii_0_rx_ctl", Standard - "rgmii_0_rxc", Standard - "rgmii_0_rxd_0", Standard - "rgmii_0_rxd_1", Standard - "rgmii_0_rxd_2", Standard - "rgmii_0_rxd_3", Standard - "rgmii_0_tx_ctl", Standard - "rgmii_0_txc", Standard - "rgmii_0_txd_0", Standard - "rgmii_0_txd_1", Standard - "rgmii_0_txd_2", Standard - "rgmii_0_txd_3", Standard - "rgmii_1_rx_ctl", Standard - "rgmii_1_rxc", Standard - "rgmii_1_rxd_0", Standard - "rgmii_1_rxd_1", Standard - "rgmii_1_rxd_2", Standard - "rgmii_1_rxd_3", Standard - "rgmii_1_tx_ctl", Standard - "rgmii_1_txc", Standard - "rgmii_1_txd_0", Standard - "rgmii_1_txd_1", Standard - "rgmii_1_txd_2", Standard - "rgmii_1_txd_3", Standard - "rgmii_gpio_0", Standard - "rgmii_gpio_1", Standard - "rgmii_gpio_2", Standard - "rgmii_gpio_3", Standard - "rtxdata2g_txdata3g1", Standard - "rtxen2g_txdata3g2", Standard - "rxdata3g0", Standard - "rxdata3g1", Standard - "rxdata3g2", Standard - "sdio1_clk", Standard - "sdio1_cmd", Standard - "sdio1_data_0", Standard - "sdio1_data_1", Standard - "sdio1_data_2", Standard - "sdio1_data_3", Standard - "sdio4_clk", Standard - "sdio4_cmd", Standard - "sdio4_data_0", Standard - "sdio4_data_1", Standard - "sdio4_data_2", Standard - "sdio4_data_3", Standard - "sim_clk", Standard - "sim_data", Standard - "sim_det", Standard - "sim_resetn", Standard - "sim2_clk", Standard - "sim2_data", Standard - "sim2_det", Standard - "sim2_resetn", Standard - "sri_c", Standard - "sri_d", Standard - "sri_e", Standard - "ssp_extclk", Standard - "ssp0_clk", Standard - "ssp0_fs", Standard - "ssp0_rxd", Standard - "ssp0_txd", Standard - "ssp2_clk", Standard - "ssp2_fs_0", Standard - "ssp2_fs_1", Standard - "ssp2_fs_2", Standard - "ssp2_fs_3", Standard - "ssp2_rxd_0", Standard - "ssp2_rxd_1", Standard - "ssp2_txd_0", Standard - "ssp2_txd_1", Standard - "ssp3_clk", Standard - "ssp3_fs", Standard - "ssp3_rxd", Standard - "ssp3_txd", Standard - "ssp4_clk", Standard - "ssp4_fs", Standard - "ssp4_rxd", Standard - "ssp4_txd", Standard - "ssp5_clk", Standard - "ssp5_fs", Standard - "ssp5_rxd", Standard - "ssp5_txd", Standard - "ssp6_clk", Standard - "ssp6_fs", Standard - "ssp6_rxd", Standard - "ssp6_txd", Standard - "stat_1", Standard - "stat_2", Standard - "sysclken", Standard - "traceclk", Standard - "tracedt00", Standard - "tracedt01", Standard - "tracedt02", Standard - "tracedt03", Standard - "tracedt04", Standard - "tracedt05", Standard - "tracedt06", Standard - "tracedt07", Standard - "tracedt08", Standard - "tracedt09", Standard - "tracedt10", Standard - "tracedt11", Standard - "tracedt12", Standard - "tracedt13", Standard - "tracedt14", Standard - "tracedt15", Standard - "txdata3g0", Standard - "txpwrind", Standard - "uartb1_ucts", Standard - "uartb1_urts", Standard - "uartb1_urxd", Standard - "uartb1_utxd", Standard - "uartb2_urxd", Standard - "uartb2_utxd", Standard - "uartb3_ucts", Standard - "uartb3_urts", Standard - "uartb3_urxd", Standard - "uartb3_utxd", Standard - "uartb4_ucts", Standard - "uartb4_urts", Standard - "uartb4_urxd", Standard - "uartb4_utxd", Standard - "vc_cam1_scl", I2C - "vc_cam1_sda", I2C - "vc_cam2_scl", I2C - "vc_cam2_sda", I2C - "vc_cam3_scl", I2C - "vc_cam3_sda", I2C diff --git a/dts/Bindings/pinctrl/brcm,bcm11351-pinctrl.yaml b/dts/Bindings/pinctrl/brcm,bcm11351-pinctrl.yaml new file mode 100644 index 0000000000..90c2752951 --- /dev/null +++ b/dts/Bindings/pinctrl/brcm,bcm11351-pinctrl.yaml @@ -0,0 +1,259 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/brcm,bcm11351-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM281xx pin controller + +maintainers: + - Florian Fainelli <florian.fainelli@broadcom.com> + - Ray Jui <rjui@broadcom.com> + - Scott Branden <sbranden@broadcom.com> + +allOf: + - $ref: pinctrl.yaml# + +properties: + compatible: + const: brcm,bcm11351-pinctrl + + reg: + maxItems: 1 + +patternProperties: + '-pins$': + type: object + additionalProperties: false + + patternProperties: + '-grp[0-9]$': + type: object + unevaluatedProperties: false + + properties: + pins: + description: + Specifies the name(s) of one or more pins to be configured by + this node. + items: + enum: [ adcsync, bat_rm, bsc1_scl, bsc1_sda, bsc2_scl, bsc2_sda, + classgpwr, clk_cx8, clkout_0, clkout_1, clkout_2, + clkout_3, clkreq_in_0, clkreq_in_1, cws_sys_req1, + cws_sys_req2, cws_sys_req3, digmic1_clk, digmic1_dq, + digmic2_clk, digmic2_dq, gpen13, gpen14, gpen15, gpio00, + gpio01, gpio02, gpio03, gpio04, gpio05, gpio06, gpio07, + gpio08, gpio09, gpio10, gpio11, gpio12, gpio13, gpio14, + gps_pablank, gps_tmark, hdmi_scl, hdmi_sda, ic_dm, ic_dp, + kp_col_ip_0, kp_col_ip_1, kp_col_ip_2, kp_col_ip_3, + kp_row_op_0, kp_row_op_1, kp_row_op_2, kp_row_op_3, + lcd_b_0, lcd_b_1, lcd_b_2, lcd_b_3, lcd_b_4, lcd_b_5, + lcd_b_6, lcd_b_7, lcd_g_0, lcd_g_1, lcd_g_2, lcd_g_3, + lcd_g_4, lcd_g_5, lcd_g_6, lcd_g_7, lcd_hsync, lcd_oe, + lcd_pclk, lcd_r_0, lcd_r_1, lcd_r_2, lcd_r_3, lcd_r_4, + lcd_r_5, lcd_r_6, lcd_r_7, lcd_vsync, mdmgpio0, mdmgpio1, + mdmgpio2, mdmgpio3, mdmgpio4, mdmgpio5, mdmgpio6, + mdmgpio7, mdmgpio8, mphi_data_0, mphi_data_1, mphi_data_2, + mphi_data_3, mphi_data_4, mphi_data_5, mphi_data_6, + mphi_data_7, mphi_data_8, mphi_data_9, mphi_data_10, + mphi_data_11, mphi_data_12, mphi_data_13, mphi_data_14, + mphi_data_15, mphi_ha0, mphi_hat0, mphi_hat1, mphi_hce0_n, + mphi_hce1_n, mphi_hrd_n, mphi_hwr_n, mphi_run0, mphi_run1, + mtx_scan_clk, mtx_scan_data, nand_ad_0, nand_ad_1, + nand_ad_2, nand_ad_3, nand_ad_4, nand_ad_5, nand_ad_6, + nand_ad_7, nand_ale, nand_cen_0, nand_cen_1, nand_cle, + nand_oen, nand_rdy_0, nand_rdy_1, nand_wen, nand_wp, pc1, + pc2, pmu_int, pmu_scl, pmu_sda, rfst2g_mtsloten3g, + rgmii_0_rx_ctl, rgmii_0_rxc, rgmii_0_rxd_0, rgmii_0_rxd_1, + rgmii_0_rxd_2, rgmii_0_rxd_3, rgmii_0_tx_ctl, rgmii_0_txc, + rgmii_0_txd_0, rgmii_0_txd_1, rgmii_0_txd_2, + rgmii_0_txd_3, rgmii_1_rx_ctl, rgmii_1_rxc, rgmii_1_rxd_0, + rgmii_1_rxd_1, rgmii_1_rxd_2, rgmii_1_rxd_3, + rgmii_1_tx_ctl, rgmii_1_txc, rgmii_1_txd_0, rgmii_1_txd_1, + rgmii_1_txd_2, rgmii_1_txd_3, rgmii_gpio_0, rgmii_gpio_1, + rgmii_gpio_2, rgmii_gpio_3, rtxdata2g_txdata3g1, + rtxen2g_txdata3g2, rxdata3g0, rxdata3g1, rxdata3g2, + sdio1_clk, sdio1_cmd, sdio1_data_0, sdio1_data_1, + sdio1_data_2, sdio1_data_3, sdio4_clk, sdio4_cmd, + sdio4_data_0, sdio4_data_1, sdio4_data_2, sdio4_data_3, + sim_clk, sim_data, sim_det, sim_resetn, sim2_clk, + sim2_data, sim2_det, sim2_resetn, sri_c, sri_d, sri_e, + ssp_extclk, ssp0_clk, ssp0_fs, ssp0_rxd, ssp0_txd, + ssp2_clk, ssp2_fs_0, ssp2_fs_1, ssp2_fs_2, ssp2_fs_3, + ssp2_rxd_0, ssp2_rxd_1, ssp2_txd_0, ssp2_txd_1, ssp3_clk, + ssp3_fs, ssp3_rxd, ssp3_txd, ssp4_clk, ssp4_fs, ssp4_rxd, + ssp4_txd, ssp5_clk, ssp5_fs, ssp5_rxd, ssp5_txd, ssp6_clk, + ssp6_fs, ssp6_rxd, ssp6_txd, stat_1, stat_2, sysclken, + traceclk, tracedt00, tracedt01, tracedt02, tracedt03, + tracedt04, tracedt05, tracedt06, tracedt07, tracedt08 + tracedt09, tracedt10, tracedt11, tracedt12, tracedt13 + tracedt14, tracedt15, txdata3g0, txpwrind, uartb1_ucts, + uartb1_urts, uartb1_urxd, uartb1_utxd, uartb2_urxd, + uartb2_utxd, uartb3_ucts, uartb3_urts, uartb3_urxd, + uartb3_utxd, uartb4_ucts, uartb4_urts, uartb4_urxd, + uartb4_utxd, vc_cam1_scl, vc_cam1_sda, vc_cam2_scl, + vc_cam2_sda, vc_cam3_scl, vc_cam3_sda ] + + function: + description: + Specifies the pin mux selection. + enum: [ alt1, alt2, alt3, alt4 ] + + slew-rate: + description: | + Meaning depends on configured pin mux: + *_scl or *_sda: + 0: Standard (100 kbps) & Fast (400 kbps) mode + 1: Highspeed (3.4 Mbps) mode + ic_dm or ic_dp: + 0: normal slew rate + 1: fast slew rate + Otherwise: + 0: fast slew rate + 1: normal slew rate + + bias-disable: true + input-disable: true + input-enable: true + + required: + - pins + + allOf: + - $ref: pincfg-node.yaml# + + # Optional properties for standard pins + - if: + properties: + pins: + contains: + enum: [ adcsync, bat_rm, classgpwr, clk_cx8, clkout_0, + clkout_1, clkout_2, clkout_3, clkreq_in_0, + clkreq_in_1, cws_sys_req1, cws_sys_req2, + cws_sys_req3, digmic1_clk, digmic1_dq, digmic2_clk, + digmic2_dq, gpen13, gpen14, gpen15, gpio00, gpio01, + gpio02, gpio03, gpio04, gpio05, gpio06, gpio07, + gpio08, gpio09, gpio10, gpio11, gpio12, gpio13, + gpio14, gps_pablank, gps_tmark, ic_dm, ic_dp, + kp_col_ip_0, kp_col_ip_1, kp_col_ip_2, kp_col_ip_3, + kp_row_op_0, kp_row_op_1, kp_row_op_2, kp_row_op_3, + lcd_b_0, lcd_b_1, lcd_b_2, lcd_b_3, lcd_b_4, lcd_b_5, + lcd_b_6, lcd_b_7, lcd_g_0, lcd_g_1, lcd_g_2, lcd_g_3, + lcd_g_4, lcd_g_5, lcd_g_6, lcd_g_7, lcd_hsync, + lcd_oe, lcd_pclk, lcd_r_0, lcd_r_1, lcd_r_2, + lcd_r_3, lcd_r_4, lcd_r_5, lcd_r_6, lcd_r_7, + lcd_vsync, mdmgpio0, mdmgpio1, mdmgpio2, mdmgpio3, + mdmgpio4, mdmgpio5, mdmgpio6, mdmgpio7, mdmgpio8, + mphi_data_0, mphi_data_1, mphi_data_2, mphi_data_3, + mphi_data_4, mphi_data_5, mphi_data_6, mphi_data_7, + mphi_data_8, mphi_data_9, mphi_data_10, + mphi_data_11, mphi_data_12, mphi_data_13, + mphi_data_14, mphi_data_15, mphi_ha0, mphi_hat0, + mphi_hat1, mphi_hce0_n, mphi_hce1_n, mphi_hrd_n, + mphi_hwr_n, mphi_run0, mphi_run1, mtx_scan_clk, + mtx_scan_data, nand_ad_0, nand_ad_1, nand_ad_2, + nand_ad_3, nand_ad_4, nand_ad_5, nand_ad_6, + nand_ad_7, nand_ale, nand_cen_0, nand_cen_1, + nand_cle, nand_oen, nand_rdy_0, nand_rdy_1, + nand_wen, nand_wp, pc1, pc2, pmu_int, + rfst2g_mtsloten3g, rgmii_0_rx_ctl, rgmii_0_rxc, + rgmii_0_rxd_0, rgmii_0_rxd_1, rgmii_0_rxd_2, + rgmii_0_rxd_3, rgmii_0_tx_ctl, rgmii_0_txc, + rgmii_0_txd_0, rgmii_0_txd_1, rgmii_0_txd_2, + rgmii_0_txd_3, rgmii_1_rx_ctl, rgmii_1_rxc, + rgmii_1_rxd_0, rgmii_1_rxd_1, rgmii_1_rxd_2, + rgmii_1_rxd_3, rgmii_1_tx_ctl, rgmii_1_txc, + rgmii_1_txd_0, rgmii_1_txd_1, rgmii_1_txd_2, + rgmii_1_txd_3, rgmii_gpio_0, rgmii_gpio_1, + rgmii_gpio_2, rgmii_gpio_3, rtxdata2g_txdata3g1, + rtxen2g_txdata3g2, rxdata3g0, rxdata3g1, rxdata3g2, + sdio1_clk, sdio1_cmd, sdio1_data_0, sdio1_data_1, + sdio1_data_2, sdio1_data_3, sdio4_clk, sdio4_cmd, + sdio4_data_0, sdio4_data_1, sdio4_data_2, + sdio4_data_3, sim_clk, sim_data, sim_det, + sim_resetn, sim2_clk, sim2_data, sim2_det, + sim2_resetn, sri_c, sri_d, sri_e, ssp_extclk, + ssp0_clk, ssp0_fs, ssp0_rxd, ssp0_txd, ssp2_clk, + ssp2_fs_0, ssp2_fs_1, ssp2_fs_2, ssp2_fs_3, + ssp2_rxd_0, ssp2_rxd_1, ssp2_txd_0, ssp2_txd_1, + ssp3_clk, ssp3_fs, ssp3_rxd, ssp3_txd, ssp4_clk, + ssp4_fs, ssp4_rxd, ssp4_txd, ssp5_clk, ssp5_fs, + ssp5_rxd, ssp5_txd, ssp6_clk, ssp6_fs, ssp6_rxd, + ssp6_txd, stat_1, stat_2, sysclken, traceclk, + tracedt00, tracedt01, tracedt02, tracedt03, + tracedt04, tracedt05, tracedt06, tracedt07, + tracedt08, tracedt09, tracedt10, tracedt11, + tracedt12, tracedt13, tracedt14, tracedt15, + txdata3g0, txpwrind, uartb1_ucts, uartb1_urts, + uartb1_urxd, uartb1_utxd, uartb2_urxd, uartb2_utxd, + uartb3_ucts, uartb3_urts, uartb3_urxd, uartb3_utxd, + uartb4_ucts, uartb4_urts, uartb4_urxd, uartb4_utxd ] + then: + properties: + drive-strength: + enum: [ 2, 4, 6, 8, 10, 12, 14, 16 ] + + bias-disable: true + bias-pull-up: true + bias-pull-down: true + input-schmitt-enable: true + input-schmitt-disable: true + + # Optional properties for I2C pins + - if: + properties: + pins: + contains: + enum: [ bsc1_scl, bsc1_sda, bsc2_scl, bsc2_sda, pmu_scl, + pmu_sda, vc_cam1_scl, vc_cam1_sda, vc_cam2_scl, + vc_cam2_sda, vc_cam3_scl, vc_cam3_sda ] + then: + properties: + bias-pull-up: + description: + There are 3 pull-up resistors (1.2k, 1.8k, 2.7k) available + in parallel for I2C pins. + enum: [ 568, 720, 831, 1080, 1200, 1800, 2700 ] + + bias-disable: true + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + pinctrl@35004800 { + compatible = "brcm,bcm11351-pinctrl"; + reg = <0x35004800 0x430>; + + dev-a-active-pins { + /* group node defining 1 standard pin */ + std-grp0 { + pins = "gpio00"; + function = "alt1"; + input-schmitt-enable; + bias-disable; + slew-rate = <1>; + drive-strength = <4>; + }; + + /* group node defining 2 I2C pins */ + i2c-grp0 { + pins = "bsc1_scl", "bsc1_sda"; + function = "alt2"; + bias-pull-up = <720>; + input-enable; + }; + + /* group node defining 2 HDMI pins */ + hdmi-grp0 { + pins = "hdmi_scl", "hdmi_sda"; + function = "alt3"; + slew-rate = <1>; + }; + }; + }; +... diff --git a/dts/Bindings/pinctrl/brcm,bcm4908-pinctrl.yaml b/dts/Bindings/pinctrl/brcm,bcm4908-pinctrl.yaml new file mode 100644 index 0000000000..8a9fb9b433 --- /dev/null +++ b/dts/Bindings/pinctrl/brcm,bcm4908-pinctrl.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/brcm,bcm4908-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM4908 pin controller + +maintainers: + - Rafał Miłecki <rafal@milecki.pl> + +description: + Binding for pin controller present on BCM4908 family SoCs. + +properties: + compatible: + const: brcm,bcm4908-pinctrl + + reg: + maxItems: 1 + +patternProperties: + '-pins$': + type: object + $ref: pinmux-node.yaml# + additionalProperties: false + + properties: + function: + enum: [ led_0, led_1, led_2, led_3, led_4, led_5, led_6, led_7, led_8, + led_9, led_10, led_11, led_12, led_13, led_14, led_15, led_16, + led_17, led_18, led_19, led_20, led_21, led_22, led_23, led_24, + led_25, led_26, led_27, led_28, led_29, led_30, led_31, + hs_uart, i2c, i2s, nand_ctrl, nand_data, emmc_ctrl, usb0_pwr, + usb1_pwr ] + + groups: + minItems: 1 + maxItems: 2 + items: + enum: [ led_0_grp_a, led_1_grp_a, led_2_grp_a, led_3_grp_a, + led_4_grp_a, led_5_grp_a, led_6_grp_a, led_7_grp_a, + led_8_grp_a, led_9_grp_a, led_10_grp_a, led_10_grp_b, + led_11_grp_a, led_11_grp_b, led_12_grp_a, led_12_grp_b, + led_13_grp_a, led_13_grp_b, led_14_grp_a, led_15_grp_a, + led_16_grp_a, led_17_grp_a, led_18_grp_a, led_19_grp_a, + led_20_grp_a, led_21_grp_a, led_22_grp_a, led_23_grp_a, + led_24_grp_a, led_25_grp_a, led_26_grp_a, led_27_grp_a, + led_28_grp_a, led_29_grp_a, led_30_grp_a, led_31_grp_a, + led_31_grp_b, hs_uart_grp, i2c_grp_a, i2c_grp_b, i2s_grp, + nand_ctrl_grp, nand_data_grp, emmc_ctrl_grp, usb0_pwr_grp, + usb1_pwr_grp ] + +allOf: + - $ref: pinctrl.yaml# + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + pinctrl@ff800560 { + compatible = "brcm,bcm4908-pinctrl"; + reg = <0xff800560 0x10>; + + led_0-a-pins { + function = "led_0"; + groups = "led_0_grp_a"; + }; + }; diff --git a/dts/Bindings/pinctrl/brcm,bcm6318-pinctrl.yaml b/dts/Bindings/pinctrl/brcm,bcm6318-pinctrl.yaml index 08995a4f85..62890a0aea 100644 --- a/dts/Bindings/pinctrl/brcm,bcm6318-pinctrl.yaml +++ b/dts/Bindings/pinctrl/brcm,bcm6318-pinctrl.yaml @@ -24,6 +24,7 @@ patternProperties: '-pins$': type: object $ref: pinmux-node.yaml# + additionalProperties: false properties: function: @@ -37,6 +38,13 @@ patternProperties: enum: [ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7, gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio40 ] + patternProperties: + '-pins$': + $ref: '#/patternProperties/-pins$' + +allOf: + - $ref: pinctrl.yaml# + required: - compatible - reg diff --git a/dts/Bindings/pinctrl/brcm,bcm63268-pinctrl.yaml b/dts/Bindings/pinctrl/brcm,bcm63268-pinctrl.yaml index 58ffed44b3..7cc0e16508 100644 --- a/dts/Bindings/pinctrl/brcm,bcm63268-pinctrl.yaml +++ b/dts/Bindings/pinctrl/brcm,bcm63268-pinctrl.yaml @@ -24,6 +24,7 @@ patternProperties: '-pins$': type: object $ref: pinmux-node.yaml# + unevaluatedProperties: false properties: function: @@ -36,11 +37,18 @@ patternProperties: pins: enum: [ gpio0, gpio1, gpio16, gpio17, gpio8, gpio9, gpio18, gpio19, - gpio22, gpio23, gpio30, gpio31, nand_grp, gpio35 + gpio22, gpio23, gpio30, gpio31, nand_grp, gpio35, dectpd_grp, vdsl_phy_override_0_grp, vdsl_phy_override_1_grp, vdsl_phy_override_2_grp, vdsl_phy_override_3_grp, dsl_gpio8, dsl_gpio9 ] + patternProperties: + '-pins$': + $ref: '#/patternProperties/-pins$' + +allOf: + - $ref: pinctrl.yaml# + required: - compatible - reg @@ -119,46 +127,46 @@ examples: pinctrl_nand: nand-pins { function = "nand"; - group = "nand_grp"; + pins = "nand_grp"; }; pinctrl_gpio35_alt: gpio35_alt-pins { function = "gpio35_alt"; - pin = "gpio35"; + pins = "gpio35"; }; pinctrl_dectpd: dectpd-pins { function = "dectpd"; - group = "dectpd_grp"; + pins = "dectpd_grp"; }; pinctrl_vdsl_phy_override_0: vdsl_phy_override_0-pins { function = "vdsl_phy_override_0"; - group = "vdsl_phy_override_0_grp"; + pins = "vdsl_phy_override_0_grp"; }; pinctrl_vdsl_phy_override_1: vdsl_phy_override_1-pins { function = "vdsl_phy_override_1"; - group = "vdsl_phy_override_1_grp"; + pins = "vdsl_phy_override_1_grp"; }; pinctrl_vdsl_phy_override_2: vdsl_phy_override_2-pins { function = "vdsl_phy_override_2"; - group = "vdsl_phy_override_2_grp"; + pins = "vdsl_phy_override_2_grp"; }; pinctrl_vdsl_phy_override_3: vdsl_phy_override_3-pins { function = "vdsl_phy_override_3"; - group = "vdsl_phy_override_3_grp"; + pins = "vdsl_phy_override_3_grp"; }; pinctrl_dsl_gpio8: dsl_gpio8-pins { function = "dsl_gpio8"; - group = "dsl_gpio8"; + pins = "dsl_gpio8"; }; pinctrl_dsl_gpio9: dsl_gpio9-pins { function = "dsl_gpio9"; - group = "dsl_gpio9"; + pins = "dsl_gpio9"; }; }; diff --git a/dts/Bindings/pinctrl/brcm,bcm6328-pinctrl.yaml b/dts/Bindings/pinctrl/brcm,bcm6328-pinctrl.yaml index 0fd24f40af..f57bb34c31 100644 --- a/dts/Bindings/pinctrl/brcm,bcm6328-pinctrl.yaml +++ b/dts/Bindings/pinctrl/brcm,bcm6328-pinctrl.yaml @@ -24,6 +24,7 @@ patternProperties: '-pins$': type: object $ref: pinmux-node.yaml# + unevaluatedProperties: false properties: function: @@ -36,6 +37,13 @@ patternProperties: gpio20, gpio25, gpio26, gpio27, gpio28, hsspi_cs1, usb_port1 ] + patternProperties: + '-pins$': + $ref: '#/patternProperties/-pins$' + +allOf: + - $ref: pinctrl.yaml# + required: - compatible - reg diff --git a/dts/Bindings/pinctrl/brcm,bcm6358-pinctrl.yaml b/dts/Bindings/pinctrl/brcm,bcm6358-pinctrl.yaml index 0c3ce256aa..ce6fc5380c 100644 --- a/dts/Bindings/pinctrl/brcm,bcm6358-pinctrl.yaml +++ b/dts/Bindings/pinctrl/brcm,bcm6358-pinctrl.yaml @@ -24,15 +24,19 @@ patternProperties: '-pins$': type: object $ref: pinmux-node.yaml# + unevaluatedProperties: false properties: function: enum: [ ebi_cs, uart1, serial_led, legacy_led, led, spi_cs, utopia, pwm_syn_clk, sys_irq ] - pins: + groups: enum: [ ebi_cs_grp, uart1_grp, serial_led_grp, legacy_led_grp, - led_grp, spi_cs_grp, utopia_grp, pwm_syn_clk, sys_irq_grp ] + led_grp, spi_cs_grp, utopia_grp, pwm_syn_clk_grp, sys_irq_grp ] + +allOf: + - $ref: pinctrl.yaml# required: - compatible diff --git a/dts/Bindings/pinctrl/brcm,bcm6362-pinctrl.yaml b/dts/Bindings/pinctrl/brcm,bcm6362-pinctrl.yaml index 6f68fee373..5f7ed7d3dd 100644 --- a/dts/Bindings/pinctrl/brcm,bcm6362-pinctrl.yaml +++ b/dts/Bindings/pinctrl/brcm,bcm6362-pinctrl.yaml @@ -24,6 +24,7 @@ patternProperties: '-pins$': type: object $ref: pinmux-node.yaml# + unevaluatedProperties: false properties: function: @@ -41,6 +42,13 @@ patternProperties: gpio15, gpio16, gpio17, gpio18, gpio19, gpio20, gpio21, gpio22, gpio23, gpio24, gpio25, gpio26, gpio27, nand_grp ] + patternProperties: + '-pins$': + $ref: '#/patternProperties/-pins$' + +allOf: + - $ref: pinctrl.yaml# + required: - compatible - reg @@ -201,6 +209,6 @@ examples: pinctrl_nand: nand-pins { function = "nand"; - group = "nand_grp"; + pins = "nand_grp"; }; }; diff --git a/dts/Bindings/pinctrl/brcm,bcm6368-pinctrl.yaml b/dts/Bindings/pinctrl/brcm,bcm6368-pinctrl.yaml index f4168b9f44..d549e94550 100644 --- a/dts/Bindings/pinctrl/brcm,bcm6368-pinctrl.yaml +++ b/dts/Bindings/pinctrl/brcm,bcm6368-pinctrl.yaml @@ -24,6 +24,7 @@ patternProperties: '-pins$': type: object $ref: pinmux-node.yaml# + unevaluatedProperties: false properties: function: @@ -42,6 +43,13 @@ patternProperties: gpio24, gpio25, gpio26, gpio27, gpio28, gpio29, gpio30, gpio31, uart1_grp ] + patternProperties: + '-pins$': + $ref: '#/patternProperties/-pins$' + +allOf: + - $ref: pinctrl.yaml# + required: - compatible - reg @@ -212,6 +220,6 @@ examples: pinctrl_uart1: uart1-pins { function = "uart1"; - group = "uart1_grp"; + pins = "uart1_grp"; }; }; diff --git a/dts/Bindings/pinctrl/brcm,ns-pinmux.yaml b/dts/Bindings/pinctrl/brcm,ns-pinmux.yaml index fc39e3e9f7..0a39dd26ee 100644 --- a/dts/Bindings/pinctrl/brcm,ns-pinmux.yaml +++ b/dts/Bindings/pinctrl/brcm,ns-pinmux.yaml @@ -53,6 +53,7 @@ patternProperties: additionalProperties: false allOf: + - $ref: pinctrl.yaml# - if: properties: compatible: @@ -77,7 +78,7 @@ additionalProperties: false examples: - | - pin-controller@1800c1c0 { + pinctrl@1800c1c0 { compatible = "brcm,bcm4708-pinmux"; reg = <0x1800c1c0 0x24>; reg-names = "cru_gpio_control"; diff --git a/dts/Bindings/pinctrl/canaan,k210-fpioa.yaml b/dts/Bindings/pinctrl/canaan,k210-fpioa.yaml index 46fbc73ab2..beb769e887 100644 --- a/dts/Bindings/pinctrl/canaan,k210-fpioa.yaml +++ b/dts/Bindings/pinctrl/canaan,k210-fpioa.yaml @@ -4,14 +4,14 @@ $id: http://devicetree.org/schemas/pinctrl/canaan,k210-fpioa.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Canaan Kendryte K210 FPIOA Device Tree Bindings +title: Canaan Kendryte K210 FPIOA maintainers: - - Damien Le Moal <damien.lemoal@wdc.com> + - Damien Le Moal <dlemoal@kernel.org> description: The Canaan Kendryte K210 SoC Fully Programmable IO Array (FPIOA) - controller allows assiging any of 256 possible functions to any of + controller allows assigning any of 256 possible functions to any of 48 IO pins of the SoC. Pin function configuration is performed on a per-pin basis. @@ -39,6 +39,10 @@ properties: canaan,k210-sysctl-power: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle of the K210 system controller node + - description: offset of its power domain control register description: | phandle of the K210 system controller node and offset of its power domain control register. @@ -116,6 +120,7 @@ patternProperties: input-schmitt-disable: true input-polarity-invert: + type: boolean description: Enable or disable pin input polarity inversion. @@ -128,6 +133,7 @@ patternProperties: output-low: true output-polarity-invert: + type: boolean description: Enable or disable pin output polarity inversion. @@ -137,6 +143,9 @@ patternProperties: additionalProperties: false +allOf: + - $ref: pinctrl.yaml# + required: - compatible - reg @@ -151,9 +160,9 @@ examples: #include <dt-bindings/clock/k210-clk.h> #include <dt-bindings/reset/k210-rst.h> - fpioa: pinmux@502B0000 { + fpioa: pinmux@502b0000 { compatible = "canaan,k210-fpioa"; - reg = <0x502B0000 0x100>; + reg = <0x502b0000 0x100>; clocks = <&sysclk K210_CLK_FPIOA>, <&sysclk K210_CLK_APB0>; clock-names = "ref", "pclk"; diff --git a/dts/Bindings/pinctrl/cirrus,lochnagar.yaml b/dts/Bindings/pinctrl/cirrus,lochnagar.yaml index a07dd19717..5e000b3fad 100644 --- a/dts/Bindings/pinctrl/cirrus,lochnagar.yaml +++ b/dts/Bindings/pinctrl/cirrus,lochnagar.yaml @@ -51,15 +51,6 @@ properties: appropriate of the LOCHNAGARx_PIN_NUM_GPIOS define, see [3]. maxItems: 1 - pinctrl-0: - description: - A phandle to the default pinctrl state. - - pinctrl-names: - description: - A pinctrl state named "default" must be defined. - const: default - pin-settings: type: object patternProperties: @@ -181,6 +172,9 @@ properties: additionalProperties: false +allOf: + - $ref: pinctrl.yaml# + required: - compatible - gpio-controller diff --git a/dts/Bindings/pinctrl/cirrus,madera.yaml b/dts/Bindings/pinctrl/cirrus,madera.yaml index 4cb174bf31..bb61a30321 100644 --- a/dts/Bindings/pinctrl/cirrus,madera.yaml +++ b/dts/Bindings/pinctrl/cirrus,madera.yaml @@ -30,16 +30,6 @@ description: | Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt properties: - pinctrl-0: - description: - A phandle to the node containing the subnodes containing default - configurations. - - pinctrl-names: - description: - A pinctrl state named "default" must be defined. - const: default - pin-settings: description: One subnode is required to contain the default settings. It @@ -50,21 +40,20 @@ properties: '-pins$': type: object allOf: - - $ref: "pincfg-node.yaml#" - - $ref: "pinmux-node.yaml#" + - $ref: pincfg-node.yaml# + - $ref: pinmux-node.yaml# properties: groups: description: Name of one pin group to configure. enum: [ aif1, aif2, aif3, aif4, mif1, mif2, mif3, pdmspk1, pdmspk2, dmic4, dmic5, dmic6, gpio1, gpio2, gpio3, - gpio4, gpio5, gpio6, gpio7, gpio7, gpio8, gpio9, + gpio4, gpio5, gpio6, gpio7, gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio14, gpio15, - gpio16, gpio17, gpio17, gpio18, gpio19, gpio20, - gpio21, gpio22, gpio23, gpio24, gpio25, gpio26, - gpio27, gpio27, gpio28, gpio29, gpio30, gpio31, - gpio32, gpio33, gpio34, gpio35, gpio36, gpio37, - gpio37, gpio38, gpio39 ] + gpio16, gpio17, gpio18, gpio19, gpio20, gpio21, + gpio22, gpio23, gpio24, gpio25, gpio26, gpio27, + gpio28, gpio29, gpio30, gpio31, gpio32, gpio33, + gpio34, gpio35, gpio36, gpio37, gpio38, gpio39 ] function: description: diff --git a/dts/Bindings/pinctrl/cypress,cy8c95x0.yaml b/dts/Bindings/pinctrl/cypress,cy8c95x0.yaml new file mode 100644 index 0000000000..7f30ec2f1e --- /dev/null +++ b/dts/Bindings/pinctrl/cypress,cy8c95x0.yaml @@ -0,0 +1,138 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/cypress,cy8c95x0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cypress CY8C95X0 I2C GPIO expander + +maintainers: + - Patrick Rudolph <patrick.rudolph@9elements.com> + +description: | + This supports the 20/40/60 pin Cypress CYC95x0 GPIO I2C expanders. + Pin function configuration is performed on a per-pin basis. + +properties: + compatible: + enum: + - cypress,cy8c9520 + - cypress,cy8c9540 + - cypress,cy8c9560 + + reg: + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + description: + The first cell is the GPIO number and the second cell specifies GPIO + flags, as defined in <dt-bindings/gpio/gpio.h>. + const: 2 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + + gpio-line-names: true + + gpio-ranges: + maxItems: 1 + + gpio-reserved-ranges: + maxItems: 1 + + vdd-supply: + description: + Optional power supply. + + reset-gpios: + description: GPIO connected to the XRES pin + maxItems: 1 + +patternProperties: + '-pins$': + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: pincfg-node.yaml# + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + pattern: '^gp([0-7][0-7])$' + minItems: 1 + maxItems: 60 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + enum: [ gpio, pwm ] + + bias-pull-down: true + + bias-pull-up: true + + bias-disable: true + + output-high: true + + output-low: true + + drive-push-pull: true + + drive-open-drain: true + + drive-open-source: true + + required: + - pins + - function + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - '#interrupt-cells' + - gpio-controller + - '#gpio-cells' + +additionalProperties: false + +allOf: + - $ref: pinctrl.yaml# + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pinctrl@20 { + compatible = "cypress,cy8c9520"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + vdd-supply = <&p3v3>; + gpio-reserved-ranges = <5 1>; + }; + }; diff --git a/dts/Bindings/pinctrl/fsl,imx7d-pinctrl.txt b/dts/Bindings/pinctrl/fsl,imx7d-pinctrl.txt deleted file mode 100644 index bfab5ca49f..0000000000 --- a/dts/Bindings/pinctrl/fsl,imx7d-pinctrl.txt +++ /dev/null @@ -1,87 +0,0 @@ -* Freescale i.MX7 Dual IOMUX Controller - -iMX7D supports two iomuxc controllers, fsl,imx7d-iomuxc controller is similar -as previous iMX SoC generation and fsl,imx7d-iomuxc-lpsr which provides low -power state retention capabilities on gpios that are part of iomuxc-lpsr -(GPIO1_IO7..GPIO1_IO0). While iomuxc-lpsr provides its own set of registers for -mux and pad control settings, it shares the input select register from main -iomuxc controller for daisy chain settings, the fsl,input-sel property extends -fsl,imx-pinctrl driver to support iomuxc-lpsr controller. - -iomuxc_lpsr: iomuxc-lpsr@302c0000 { - compatible = "fsl,imx7d-iomuxc-lpsr"; - reg = <0x302c0000 0x10000>; - fsl,input-sel = <&iomuxc>; -}; - -iomuxc: iomuxc@30330000 { - compatible = "fsl,imx7d-iomuxc"; - reg = <0x30330000 0x10000>; -}; - -Peripherals using pads from iomuxc-lpsr support low state retention power -state, under LPSR mode GPIO's state of pads are retain. - -Please refer to fsl,imx-pinctrl.txt in this directory for common binding part -and usage. - -Required properties: -- compatible: "fsl,imx7d-iomuxc" for main IOMUXC controller, or - "fsl,imx7d-iomuxc-lpsr" for Low Power State Retention IOMUXC controller. -- fsl,pins: each entry consists of 6 integers and represents the mux and config - setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val - input_val> are specified using a PIN_FUNC_ID macro, which can be found in - imx7d-pinfunc.h under device tree source folder. The last integer CONFIG is - the pad setting value like pull-up on this pin. Please refer to i.MX7 Dual - Reference Manual for detailed CONFIG settings. -- fsl,input-sel: required property for iomuxc-lpsr controller, this property is - a phandle for main iomuxc controller which shares the input select register for - daisy chain settings. - -CONFIG bits definition: -PAD_CTL_PUS_100K_DOWN (0 << 5) -PAD_CTL_PUS_5K_UP (1 << 5) -PAD_CTL_PUS_47K_UP (2 << 5) -PAD_CTL_PUS_100K_UP (3 << 5) -PAD_CTL_PUE (1 << 4) -PAD_CTL_HYS (1 << 3) -PAD_CTL_SRE_SLOW (1 << 2) -PAD_CTL_SRE_FAST (0 << 2) -PAD_CTL_DSE_X1 (0 << 0) -PAD_CTL_DSE_X4 (1 << 0) -PAD_CTL_DSE_X2 (2 << 0) -PAD_CTL_DSE_X6 (3 << 0) - -Examples: -While iomuxc-lpsr is intended to be used by dedicated peripherals to take -advantages of LPSR power mode, is also possible that an IP to use pads from -any of the iomux controllers. For example the I2C1 IP can use SCL pad from -iomuxc-lpsr controller and SDA pad from iomuxc controller as: - -i2c1: i2c@30a20000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1_1>, <&pinctrl_i2c1_2>; -}; - -iomuxc-lpsr@302c0000 { - compatible = "fsl,imx7d-iomuxc-lpsr"; - reg = <0x302c0000 0x10000>; - fsl,input-sel = <&iomuxc>; - - pinctrl_i2c1_1: i2c1grp-1 { - fsl,pins = < - MX7D_PAD_GPIO1_IO04__I2C1_SCL 0x4000007f - >; - }; -}; - -iomuxc@30330000 { - compatible = "fsl,imx7d-iomuxc"; - reg = <0x30330000 0x10000>; - - pinctrl_i2c1_2: i2c1grp-2 { - fsl,pins = < - MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f - >; - }; -}; diff --git a/dts/Bindings/pinctrl/fsl,imx7d-pinctrl.yaml b/dts/Bindings/pinctrl/fsl,imx7d-pinctrl.yaml new file mode 100644 index 0000000000..7bd723ab12 --- /dev/null +++ b/dts/Bindings/pinctrl/fsl,imx7d-pinctrl.yaml @@ -0,0 +1,113 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/fsl,imx7d-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale IMX7D IOMUX Controller + +maintainers: + - Dong Aisheng <aisheng.dong@nxp.com> + +description: + Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory + for common binding part and usage. + +properties: + compatible: + oneOf: + - enum: + - fsl,imx7d-iomuxc + - fsl,imx7d-iomuxc-lpsr + + reg: + maxItems: 1 + + fsl,input-sel: + description: + phandle for main iomuxc controller which shares the input select + register for daisy chain settings. + $ref: /schemas/types.yaml#/definitions/phandle + +# Client device subnode's properties +patternProperties: + 'grp$': + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + + properties: + fsl,pins: + description: + each entry consists of 6 integers and represents the mux and config + setting for one pin. The first 5 integers <mux_reg conf_reg input_reg + mux_val input_val> are specified using a PIN_FUNC_ID macro, which can + be found in <arch/arm/boot/dts/imx7d-pinfunc.h>. The last integer + CONFIG is the pad setting value like pull-up on this pin. Please + refer to i.MX7D Reference Manual for detailed CONFIG settings. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: | + "mux_reg" indicates the offset of mux register. + - description: | + "conf_reg" indicates the offset of pad configuration register. + - description: | + "input_reg" indicates the offset of select input register. + - description: | + "mux_val" indicates the mux value to be applied. + - description: | + "input_val" indicates the select input value to be applied. + - description: | + "pad_setting" indicates the pad configuration value to be applied. + + required: + - fsl,pins + + additionalProperties: false + +allOf: + - $ref: pinctrl.yaml# + +required: + - compatible + - reg + +if: + properties: + compatible: + contains: + enum: + - fsl,imx7d-iomuxc-lpsr + +then: + required: + - fsl,input-sel + +additionalProperties: false + +examples: + - | + iomuxc: pinctrl@30330000 { + compatible = "fsl,imx7d-iomuxc"; + reg = <0x30330000 0x10000>; + + pinctrl_uart5: uart5grp { + fsl,pins = + <0x0160 0x03D0 0x0714 0x1 0x0 0x7e>, + <0x0164 0x03D4 0x0000 0x1 0x0 0x76>; + }; + }; + - | + iomuxc_lpsr: pinctrl@302c0000 { + compatible = "fsl,imx7d-iomuxc-lpsr"; + reg = <0x302c0000 0x10000>; + fsl,input-sel = <&iomuxc>; + + pinctrl_gpio_lpsr: gpio1-grp { + fsl,pins = + <0x0008 0x0038 0x0000 0x0 0x0 0x59>, + <0x000C 0x003C 0x0000 0x0 0x0 0x59>; + }; + }; diff --git a/dts/Bindings/pinctrl/fsl,imx8mm-pinctrl.yaml b/dts/Bindings/pinctrl/fsl,imx8m-pinctrl.yaml index 6d7d162e61..6068be11df 100644 --- a/dts/Bindings/pinctrl/fsl,imx8mm-pinctrl.yaml +++ b/dts/Bindings/pinctrl/fsl,imx8m-pinctrl.yaml @@ -1,13 +1,13 @@ -# SPDX-License-Identifier: GPL-2.0 +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/pinctrl/fsl,imx8mm-pinctrl.yaml# +$id: http://devicetree.org/schemas/pinctrl/fsl,imx8m-pinctrl.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Freescale IMX8MM IOMUX Controller +title: Freescale IMX8M IOMUX Controller maintainers: - - Anson Huang <Anson.Huang@nxp.com> + - Peng Fan <peng.fan@nxp.com> description: Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory @@ -15,7 +15,11 @@ description: properties: compatible: - const: fsl,imx8mm-iomuxc + enum: + - fsl,imx8mm-iomuxc + - fsl,imx8mn-iomuxc + - fsl,imx8mp-iomuxc + - fsl,imx8mq-iomuxc reg: maxItems: 1 @@ -34,9 +38,10 @@ patternProperties: each entry consists of 6 integers and represents the mux and config setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val input_val> are specified using a PIN_FUNC_ID macro, which can - be found in <arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h>. The last - integer CONFIG is the pad setting value like pull-up on this pin. Please - refer to i.MX8M Mini Reference Manual for detailed CONFIG settings. + be found in <arch/arm64/boot/dts/freescale/imx8m[m,n,p,q]-pinfunc.h>. + The last integer CONFIG is the pad setting value like pull-up on this + pin. Please refer to i.MX8M Mini/Nano/Plus/Quad Reference Manual for + detailed CONFIG settings. $ref: /schemas/types.yaml#/definitions/uint32-matrix items: items: @@ -51,13 +56,17 @@ patternProperties: - description: | "input_val" indicates the select input value to be applied. - description: | - "pad_setting" indicates the pad configuration value to be applied. + "pad_setting" indicates the pad configuration value to be + applied. required: - fsl,pins additionalProperties: false +allOf: + - $ref: pinctrl.yaml# + required: - compatible - reg diff --git a/dts/Bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml b/dts/Bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml index 86622c4f37..7dcf681271 100644 --- a/dts/Bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml +++ b/dts/Bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml @@ -56,6 +56,9 @@ patternProperties: additionalProperties: false +allOf: + - $ref: pinctrl.yaml# + required: - compatible - reg diff --git a/dts/Bindings/pinctrl/fsl,imx8mp-pinctrl.yaml b/dts/Bindings/pinctrl/fsl,imx93-pinctrl.yaml index d474bc1f39..2f24051029 100644 --- a/dts/Bindings/pinctrl/fsl,imx8mp-pinctrl.yaml +++ b/dts/Bindings/pinctrl/fsl,imx93-pinctrl.yaml @@ -1,21 +1,24 @@ -# SPDX-License-Identifier: GPL-2.0 +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- -$id: http://devicetree.org/schemas/pinctrl/fsl,imx8mp-pinctrl.yaml# +$id: http://devicetree.org/schemas/pinctrl/fsl,imx93-pinctrl.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Freescale IMX8MP IOMUX Controller +title: Freescale IMX93 IOMUX Controller maintainers: - - Anson Huang <Anson.Huang@nxp.com> + - Peng Fan <peng.fan@nxp.com> description: Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory for common binding part and usage. +allOf: + - $ref: pinctrl.yaml# + properties: compatible: - const: fsl,imx8mp-iomuxc + const: fsl,imx93-iomuxc reg: maxItems: 1 @@ -53,6 +56,7 @@ patternProperties: - description: | "pad_setting" indicates the pad configuration value to be applied. + required: - fsl,pins @@ -67,14 +71,14 @@ additionalProperties: false examples: # Pinmux controller node - | - iomuxc: pinctrl@30330000 { - compatible = "fsl,imx8mp-iomuxc"; + iomuxc: pinctrl@443c0000 { + compatible = "fsl,imx93-iomuxc"; reg = <0x30330000 0x10000>; - pinctrl_uart2: uart2grp { + pinctrl_uart3: uart3grp { fsl,pins = - <0x228 0x488 0x5F0 0x0 0x6 0x49>, - <0x228 0x488 0x000 0x0 0x0 0x49>; + <0x48 0x1f8 0x41c 0x1 0x0 0x49>, + <0x4c 0x1fc 0x418 0x1 0x0 0x49>; }; }; diff --git a/dts/Bindings/pinctrl/fsl,imx8mq-pinctrl.yaml b/dts/Bindings/pinctrl/fsl,imxrt1050.yaml index 0af2b6c95c..db5fe66ad8 100644 --- a/dts/Bindings/pinctrl/fsl,imx8mq-pinctrl.yaml +++ b/dts/Bindings/pinctrl/fsl,imxrt1050.yaml @@ -1,13 +1,14 @@ -# SPDX-License-Identifier: GPL-2.0 +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/pinctrl/fsl,imx8mq-pinctrl.yaml# +$id: http://devicetree.org/schemas/pinctrl/fsl,imxrt1050.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Freescale IMX8MQ IOMUX Controller +title: Freescale IMXRT1050 IOMUX Controller maintainers: - - Anson Huang <Anson.Huang@nxp.com> + - Giulio Benetti <giulio.benetti@benettiengineering.com> + - Jesse Taube <Mr.Bossman075@gmail.com> description: Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory @@ -15,7 +16,7 @@ description: properties: compatible: - const: fsl,imx8mq-iomuxc + const: fsl,imxrt1050-iomuxc reg: maxItems: 1 @@ -34,9 +35,9 @@ patternProperties: each entry consists of 6 integers and represents the mux and config setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val input_val> are specified using a PIN_FUNC_ID macro, which can - be found in <arch/arm64/boot/dts/freescale/imx8mq-pinfunc.h>. The last + be found in <arch/arm/boot/dts/imxrt1050-pinfunc.h>. The last integer CONFIG is the pad setting value like pull-up on this pin. Please - refer to i.MX8M Quad Reference Manual for detailed CONFIG settings. + refer to i.MXRT1050 Reference Manual for detailed CONFIG settings. $ref: /schemas/types.yaml#/definitions/uint32-matrix items: items: @@ -65,17 +66,14 @@ required: additionalProperties: false examples: - # Pinmux controller node - | - iomuxc: pinctrl@30330000 { - compatible = "fsl,imx8mq-iomuxc"; - reg = <0x30330000 0x10000>; + iomuxc: iomuxc@401f8000 { + compatible = "fsl,imxrt1050-iomuxc"; + reg = <0x401f8000 0x4000>; - pinctrl_uart1: uart1grp { + pinctrl_lpuart1: lpuart1grp { fsl,pins = - <0x234 0x49C 0x4F4 0x0 0x0 0x49>, - <0x238 0x4A0 0x4F4 0x0 0x0 0x49>; + <0x0EC 0x2DC 0x000 0x2 0x0 0xf1>, + <0x0F0 0x2E0 0x000 0x2 0x0 0xf1>; }; }; - -... diff --git a/dts/Bindings/pinctrl/fsl,imx8mn-pinctrl.yaml b/dts/Bindings/pinctrl/fsl,imxrt1170.yaml index 7131cfd1fc..2e880b3e53 100644 --- a/dts/Bindings/pinctrl/fsl,imx8mn-pinctrl.yaml +++ b/dts/Bindings/pinctrl/fsl,imxrt1170.yaml @@ -1,13 +1,14 @@ -# SPDX-License-Identifier: GPL-2.0 +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/pinctrl/fsl,imx8mn-pinctrl.yaml# +$id: http://devicetree.org/schemas/pinctrl/fsl,imxrt1170.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Freescale IMX8MN IOMUX Controller +title: Freescale i.MXRT1170 IOMUX Controller maintainers: - - Anson Huang <Anson.Huang@nxp.com> + - Giulio Benetti <giulio.benetti@benettiengineering.com> + - Jesse Taube <Mr.Bossman075@gmail.com> description: Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory @@ -15,7 +16,7 @@ description: properties: compatible: - const: fsl,imx8mn-iomuxc + const: fsl,imxrt1170-iomuxc reg: maxItems: 1 @@ -34,9 +35,9 @@ patternProperties: each entry consists of 6 integers and represents the mux and config setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val input_val> are specified using a PIN_FUNC_ID macro, which can - be found in <arch/arm64/boot/dts/freescale/imx8mn-pinfunc.h>. The last + be found in <arch/arm/boot/dts/imxrt1170-pinfunc.h>. The last integer CONFIG is the pad setting value like pull-up on this pin. Please - refer to i.MX8M Nano Reference Manual for detailed CONFIG settings. + refer to i.MXRT1170 Reference Manual for detailed CONFIG settings. $ref: /schemas/types.yaml#/definitions/uint32-matrix items: items: @@ -52,7 +53,6 @@ patternProperties: "input_val" indicates the select input value to be applied. - description: | "pad_setting" indicates the pad configuration value to be applied. - required: - fsl,pins @@ -65,17 +65,13 @@ required: additionalProperties: false examples: - # Pinmux controller node - | - iomuxc: pinctrl@30330000 { - compatible = "fsl,imx8mn-iomuxc"; - reg = <0x30330000 0x10000>; - - pinctrl_uart2: uart2grp { + iomuxc: iomuxc@400e8000 { + compatible = "fsl,imxrt1170-iomuxc"; + reg = <0x400e8000 0x4000>; + pinctrl_lpuart1: lpuart1grp { fsl,pins = - <0x23C 0x4A4 0x4FC 0x0 0x0 0x140>, - <0x240 0x4A8 0x000 0x0 0x0 0x140>; + <0x16C 0x3B0 0x620 0x0 0x0 0xf1>, + <0x170 0x3B4 0x61C 0x0 0x0 0xf1>; }; }; - -... diff --git a/dts/Bindings/pinctrl/fsl,scu-pinctrl.yaml b/dts/Bindings/pinctrl/fsl,scu-pinctrl.yaml new file mode 100644 index 0000000000..fcd729afee --- /dev/null +++ b/dts/Bindings/pinctrl/fsl,scu-pinctrl.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/fsl,scu-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: i.MX SCU Client Device Node - Pinctrl Based on SCU Message Protocol + +maintainers: + - Dong Aisheng <aisheng.dong@nxp.com> + +description: i.MX SCU Client Device Node + Client nodes are maintained as children of the relevant IMX-SCU device node. + This binding uses the i.MX common pinctrl binding. + (Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt) + +allOf: + - $ref: pinctrl.yaml# + +properties: + compatible: + enum: + - fsl,imx8qm-iomuxc + - fsl,imx8qxp-iomuxc + - fsl,imx8dxl-iomuxc + +patternProperties: + 'grp$': + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + + properties: + fsl,pins: + description: + each entry consists of 3 integers and represents the pin ID, the mux value + and pad setting for the pin. The first 2 integers - pin_id and mux_val - are + specified using a PIN_FUNC_ID macro, which can be found in + <include/dt-bindings/pinctrl/pads-imx8qxp.h>. The last integer is + the pad setting value like pull-up on this pin. Please refer to the + appropriate i.MX8 Reference Manual for detailed pad CONFIG settings. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: | + "pin_id" indicates the pin ID + - description: | + "mux_val" indicates the mux value to be applied. + - description: | + "pad_setting" indicates the pad configuration value to be applied. + + required: + - fsl,pins + + additionalProperties: false + +required: + - compatible + +additionalProperties: false + +examples: + - | + pinctrl { + compatible = "fsl,imx8qxp-iomuxc"; + + pinctrl_lpuart0: lpuart0grp { + fsl,pins = < + 111 0 0x06000020 + 112 0 0x06000020 + >; + }; + }; diff --git a/dts/Bindings/pinctrl/ingenic,pinctrl.yaml b/dts/Bindings/pinctrl/ingenic,pinctrl.yaml index a12d0ceb76..890961826c 100644 --- a/dts/Bindings/pinctrl/ingenic,pinctrl.yaml +++ b/dts/Bindings/pinctrl/ingenic,pinctrl.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/pinctrl/ingenic,pinctrl.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Ingenic SoCs pin controller devicetree bindings +title: Ingenic SoCs pin controller description: > Please refer to pinctrl-bindings.txt in this directory for details of the @@ -28,9 +28,6 @@ maintainers: - Paul Cercueil <paul@crapouillou.net> properties: - nodename: - pattern: "^pinctrl@[0-9a-f]+$" - compatible: oneOf: - enum: @@ -121,6 +118,9 @@ patternProperties: additionalProperties: false +allOf: + - $ref: pinctrl.yaml# + required: - compatible - reg @@ -135,7 +135,6 @@ additionalProperties: - $ref: pinmux-node.yaml# properties: - phandle: true function: true groups: true pins: true @@ -147,8 +146,6 @@ additionalProperties: additionalProperties: false - type: object - properties: - phandle: true additionalProperties: type: object allOf: @@ -156,7 +153,6 @@ additionalProperties: - $ref: pinmux-node.yaml# properties: - phandle: true function: true groups: true pins: true @@ -169,7 +165,7 @@ additionalProperties: examples: - | - pin-controller@10010000 { + pinctrl@10010000 { compatible = "ingenic,jz4770-pinctrl"; reg = <0x10010000 0x600>; diff --git a/dts/Bindings/pinctrl/intel,lgm-io.yaml b/dts/Bindings/pinctrl/intel,lgm-io.yaml index 2c0acb405e..1144ca2896 100644 --- a/dts/Bindings/pinctrl/intel,lgm-io.yaml +++ b/dts/Bindings/pinctrl/intel,lgm-io.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/pinctrl/intel,lgm-io.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Intel Lightning Mountain SoC pinmux & GPIO controller binding +title: Intel Lightning Mountain SoC pinmux & GPIO controller maintainers: - Rahul Tanwar <rahul.tanwar@linux.intel.com> @@ -47,6 +47,9 @@ patternProperties: additionalProperties: false +allOf: + - $ref: pinctrl.yaml# + required: - compatible - reg diff --git a/dts/Bindings/pinctrl/intel,pinctrl-keembay.yaml b/dts/Bindings/pinctrl/intel,pinctrl-keembay.yaml index 5e99d79499..005d95a9e4 100644 --- a/dts/Bindings/pinctrl/intel,pinctrl-keembay.yaml +++ b/dts/Bindings/pinctrl/intel,pinctrl-keembay.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/pinctrl/intel,pinctrl-keembay.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Intel Keem Bay pin controller Device Tree Bindings +title: Intel Keem Bay pin controller maintainers: - Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com> @@ -44,6 +44,7 @@ properties: patternProperties: '^gpio@[0-9a-f]*$': type: object + additionalProperties: false description: Child nodes can be specified to contain pin configuration information, diff --git a/dts/Bindings/pinctrl/lantiq,pinctrl-xway.txt b/dts/Bindings/pinctrl/lantiq,pinctrl-xway.txt index 4658f105fa..6bd9bc61be 100644 --- a/dts/Bindings/pinctrl/lantiq,pinctrl-xway.txt +++ b/dts/Bindings/pinctrl/lantiq,pinctrl-xway.txt @@ -1,11 +1,7 @@ Lantiq XWAY pinmux controller Required properties: -- compatible: "lantiq,pinctrl-xway", (DEPRECATED: Use "lantiq,pinctrl-danube") - "lantiq,pinctrl-xr9", (DEPRECATED: Use "lantiq,xrx100-pinctrl" or - "lantiq,xrx200-pinctrl") - "lantiq,pinctrl-ase", (DEPRECATED: Use "lantiq,ase-pinctrl") - "lantiq,<chip>-pinctrl", where <chip> is: +- compatible: "lantiq,<chip>-pinctrl", where <chip> is: "ase" (XWAY AMAZON Family) "danube" (XWAY DANUBE Family) "xrx100" (XWAY xRX100 Family) @@ -45,29 +41,6 @@ Required subnode-properties: Valid values for group and function names: -XWAY: (DEPRECATED: Use DANUBE) - mux groups: - exin0, exin1, exin2, jtag, ebu a23, ebu a24, ebu a25, ebu clk, ebu cs1, - ebu wait, nand ale, nand cs1, nand cle, spi, spi_cs1, spi_cs2, spi_cs3, - spi_cs4, spi_cs5, spi_cs6, asc0, asc0 cts rts, stp, nmi, gpt1, gpt2, - gpt3, clkout0, clkout1, clkout2, clkout3, gnt1, gnt2, gnt3, req1, req2, - req3 - - functions: - spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu - -XR9: ( DEPRECATED: Use xRX100/xRX200) - mux groups: - exin0, exin1, exin2, exin3, exin4, jtag, ebu a23, ebu a24, ebu a25, - ebu clk, ebu cs1, ebu wait, nand ale, nand cs1, nand cle, nand rdy, - nand rd, spi, spi_cs1, spi_cs2, spi_cs3, spi_cs4, spi_cs5, spi_cs6, - asc0, asc0 cts rts, stp, nmi, gpt1, gpt2, gpt3, clkout0, clkout1, - clkout2, clkout3, gnt1, gnt2, gnt3, gnt4, req1, req2, req3, req4, mdio, - gphy0 led0, gphy0 led1, gphy0 led2, gphy1 led0, gphy1 led1, gphy1 led2 - - functions: - spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu, mdio, gphy - AMAZON: mux groups: exin0, exin1, exin2, jtag, spi_di, spi_do, spi_clk, spi_cs1, spi_cs2, @@ -139,12 +112,6 @@ Optional subnode-properties: 0: none, 1: down, 2: up. - lantiq,open-drain: Boolean, enables open-drain on the defined pin. -Valid values for XWAY pin names: (DEPRECATED: Use DANUBE) - Pinconf pins can be referenced via the names io0-io31. - -Valid values for XR9 pin names: (DEPRECATED: Use xrX100/xRX200) - Pinconf pins can be referenced via the names io0-io55. - Valid values for AMAZON pin names: Pinconf pins can be referenced via the names io0-io31. diff --git a/dts/Bindings/pinctrl/loongson,ls2k-pinctrl.yaml b/dts/Bindings/pinctrl/loongson,ls2k-pinctrl.yaml new file mode 100644 index 0000000000..bd8a458435 --- /dev/null +++ b/dts/Bindings/pinctrl/loongson,ls2k-pinctrl.yaml @@ -0,0 +1,123 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/loongson,ls2k-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Loongson-2 SoC Pinctrl Controller + +maintainers: + - zhanghongchen <zhanghongchen@loongson.cn> + - Yinbo Zhu <zhuyinbo@loongson.cn> + +allOf: + - $ref: pinctrl.yaml# + +properties: + compatible: + const: loongson,ls2k-pinctrl + + reg: + maxItems: 1 + +patternProperties: + '-pins$': + type: object + + additionalProperties: false + + patternProperties: + 'pinmux$': + type: object + description: node for pinctrl. + $ref: pinmux-node.yaml# + + unevaluatedProperties: false + + properties: + groups: + description: + One or more groups of pins to mux to a certain function + items: + enum: [gpio, sdio, can1, can0, pwm3, pwm2, pwm1, pwm0, i2c1, i2c0, + nand, sata_led, i2s, hda] + function: + description: + The function that a group of pins is muxed to + enum: [gpio, sdio, can1, can0, pwm3, pwm2, pwm1, pwm0, i2c1, i2c0, + nand, sata_led, i2s, hda] + + required: + - groups + - function + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + pctrl: pinctrl@1fe00420 { + compatible = "loongson,ls2k-pinctrl"; + reg = <0x1fe00420 0x18>; + sdio_pins_default: sdio-pins { + sdio-pinmux { + groups = "sdio"; + function = "sdio"; + }; + + sdio-det-pinmux { + groups = "pwm2"; + function = "gpio"; + }; + }; + + pwm1_pins_default: pwm1-pins { + pinmux { + groups = "pwm1"; + function = "pwm1"; + }; + }; + + pwm0_pins_default: pwm0-pins { + pinmux { + groups = "pwm0"; + function = "pwm0"; + }; + }; + + i2c1_pins_default: i2c1-pins { + pinmux { + groups = "i2c1"; + function = "i2c1"; + }; + }; + + i2c0_pins_default: i2c0-pins { + pinmux { + groups = "i2c0"; + function = "i2c0"; + }; + }; + + nand_pins_default: nand-pins { + pinmux { + groups = "nand"; + function = "nand"; + }; + }; + + hda_pins_default: hda-pins { + grp0-pinmux { + groups = "hda"; + function = "hda"; + }; + + grp1-pinmux { + groups = "i2s"; + function = "gpio"; + }; + }; + }; diff --git a/dts/Bindings/pinctrl/marvell,ac5-pinctrl.yaml b/dts/Bindings/pinctrl/marvell,ac5-pinctrl.yaml new file mode 100644 index 0000000000..afea9424c7 --- /dev/null +++ b/dts/Bindings/pinctrl/marvell,ac5-pinctrl.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/marvell,ac5-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell AC5 pin controller + +maintainers: + - Chris Packham <chris.packham@alliedtelesis.co.nz> + +description: + Bindings for Marvell's AC5 memory-mapped pin controller. + +properties: + compatible: + items: + - const: marvell,ac5-pinctrl + + reg: + maxItems: 1 + +patternProperties: + '-pins$': + type: object + $ref: pinmux-node.yaml# + additionalProperties: false + + properties: + marvell,function: + $ref: /schemas/types.yaml#/definitions/string + description: + Indicates the function to select. + enum: [ dev_init_done, ge, gpio, i2c0, i2c1, int_out, led, nand, pcie, ptp, sdio, + spi0, spi1, synce, tsen_int, uart0, uart1, uart2, uart3, uartsd, wd_int, xg ] + + marvell,pins: + $ref: /schemas/types.yaml#/definitions/string-array + description: + Array of MPP pins to be used for the given function. + minItems: 1 + items: + enum: [ mpp0, mpp1, mpp2, mpp3, mpp4, mpp5, mpp6, mpp7, mpp8, mpp9, + mpp10, mpp11, mpp12, mpp13, mpp14, mpp15, mpp16, mpp17, mpp18, mpp19, + mpp20, mpp21, mpp22, mpp23, mpp24, mpp25, mpp26, mpp27, mpp28, mpp29, + mpp30, mpp31, mpp32, mpp33, mpp34, mpp35, mpp36, mpp37, mpp38, mpp39, + mpp40, mpp41, mpp42, mpp43, mpp44, mpp45 ] + +allOf: + - $ref: pinctrl.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + pinctrl@80020100 { + compatible = "marvell,ac5-pinctrl"; + reg = <0x80020100 0x20>; + + i2c0_pins: i2c0-pins { + marvell,pins = "mpp26", "mpp27"; + marvell,function = "i2c0"; + }; + + i2c0_gpio: i2c0-gpio-pins { + marvell,pins = "mpp26", "mpp27"; + marvell,function = "gpio"; + }; + }; diff --git a/dts/Bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml b/dts/Bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml index f8e6e138dc..bccff08a5b 100644 --- a/dts/Bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml +++ b/dts/Bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml @@ -4,13 +4,13 @@ $id: http://devicetree.org/schemas/pinctrl/mediatek,mt65xx-pinctrl.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Mediatek MT65xx Pin Controller Device Tree Bindings +title: MediaTek MT65xx Pin Controller maintainers: - Sean Wang <sean.wang@kernel.org> -description: |+ - The Mediatek's Pin controller is used to control SoC pins. +description: + The MediaTek's MT65xx Pin controller is used to control SoC pins. properties: compatible: @@ -30,23 +30,26 @@ properties: pins-are-numbered: $ref: /schemas/types.yaml#/definitions/flag - description: | - Specify the subnodes are using numbered pinmux to specify pins. + description: + Specify the subnodes are using numbered pinmux to specify pins. (UNUSED) + deprecated: true gpio-controller: true "#gpio-cells": const: 2 - description: | - Number of cells in GPIO specifier. Since the generic GPIO - binding is used, the amount of cells must be specified as 2. See the below - mentioned gpio binding representation for description of particular cells. + description: + Number of cells in GPIO specifier. Since the generic GPIO binding is used, + the amount of cells must be specified as 2. See the below mentioned gpio + binding representation for description of particular cells. mediatek,pctl-regmap: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 minItems: 1 maxItems: 2 - description: | + description: Should be phandles of the syscfg node. interrupt-controller: true @@ -60,37 +63,39 @@ properties: required: - compatible - - pins-are-numbered - gpio-controller - "#gpio-cells" +allOf: + - $ref: pinctrl.yaml# + patternProperties: - '-[0-9]+$': + 'pins$': type: object additionalProperties: false patternProperties: - 'pins': + '(^pins|pins?$)': type: object additionalProperties: false - description: | + description: A pinctrl node should contain at least one subnodes representing the pinctrl groups available on the machine. Each subnode will list the pins it needs, and how they should be configured, with regard to muxer configuration, pullups, drive strength, input enable/disable and input schmitt. - $ref: "/schemas/pinctrl/pincfg-node.yaml" + $ref: /schemas/pinctrl/pincfg-node.yaml properties: pinmux: description: - integer array, represents gpio pin number and mux setting. + Integer array, represents gpio pin number and mux setting. Supported pin number and mux varies for different SoCs, and are - defined as macros in <soc>-pinfunc.h directly. + defined as macros in dt-bindings/pinctrl/<soc>-pinfunc.h directly. bias-disable: true bias-pull-up: - description: | + description: Besides generic pinconfig options, it can be used as the pull up settings for 2 pull resistors, R0 and R1. User can configure those special pins. Some macros have been defined for this usage, such @@ -112,7 +117,7 @@ patternProperties: input-schmitt-disable: true drive-strength: - description: | + description: Can support some arguments, such as MTK_DRIVE_4mA, MTK_DRIVE_6mA, etc. See dt-bindings/pinctrl/mt65xx.h for valid arguments. @@ -145,7 +150,6 @@ examples: compatible = "mediatek,mt8135-pinctrl"; reg = <0 0x1000B000 0 0x1000>; mediatek,pctl-regmap = <&syscfg_pctl_a>, <&syscfg_pctl_b>; - pins-are-numbered; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -154,7 +158,7 @@ examples: <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; - i2c0_pins_a: i2c0-0 { + i2c0_pins_a: i2c0-pins { pins1 { pinmux = <MT8135_PIN_100_SDA0__FUNC_SDA0>, <MT8135_PIN_101_SCL0__FUNC_SCL0>; @@ -162,7 +166,7 @@ examples: }; }; - i2c1_pins_a: i2c1-0 { + i2c1_pins_a: i2c1-pins { pins { pinmux = <MT8135_PIN_195_SDA1__FUNC_SDA1>, <MT8135_PIN_196_SCL1__FUNC_SCL1>; @@ -170,7 +174,7 @@ examples: }; }; - i2c2_pins_a: i2c2-0 { + i2c2_pins_a: i2c2-pins { pins1 { pinmux = <MT8135_PIN_193_SDA2__FUNC_SDA2>; bias-pull-down; @@ -182,7 +186,7 @@ examples: }; }; - i2c3_pins_a: i2c3-0 { + i2c3_pins_a: i2c3-pins { pins1 { pinmux = <MT8135_PIN_40_DAC_CLK__FUNC_GPIO40>, <MT8135_PIN_41_DAC_WS__FUNC_GPIO41>; diff --git a/dts/Bindings/pinctrl/mediatek,mt6779-pinctrl.yaml b/dts/Bindings/pinctrl/mediatek,mt6779-pinctrl.yaml index 152c151c27..3bbc00df55 100644 --- a/dts/Bindings/pinctrl/mediatek,mt6779-pinctrl.yaml +++ b/dts/Bindings/pinctrl/mediatek,mt6779-pinctrl.yaml @@ -4,56 +4,47 @@ $id: http://devicetree.org/schemas/pinctrl/mediatek,mt6779-pinctrl.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Mediatek MT6779 Pin Controller Device Tree Bindings +title: MediaTek MT6779 Pin Controller maintainers: - Andy Teng <andy.teng@mediatek.com> + - Sean Wang <sean.wang@kernel.org> -description: |+ - The pin controller node should be the child of a syscon node with the - required property: - - compatible: "syscon" +description: + The MediaTek pin controller on MT6779 is used to control pin functions, pull + up/down resistance and drive strength options. properties: compatible: - const: mediatek,mt6779-pinctrl + enum: + - mediatek,mt6779-pinctrl + - mediatek,mt6797-pinctrl reg: - minItems: 9 - maxItems: 9 - - reg-names: - items: - - const: "gpio" - - const: "iocfg_rm" - - const: "iocfg_br" - - const: "iocfg_lm" - - const: "iocfg_lb" - - const: "iocfg_rt" - - const: "iocfg_lt" - - const: "iocfg_tl" - - const: "eint" + description: Physical addresses for GPIO base(s) and EINT registers. + + reg-names: true gpio-controller: true "#gpio-cells": const: 2 - description: | - Number of cells in GPIO specifier. Since the generic GPIO - binding is used, the amount of cells must be specified as 2. See the below - mentioned gpio binding representation for description of particular cells. + description: + Number of cells in GPIO specifier. Since the generic GPIO binding is used, + the amount of cells must be specified as 2. See the below mentioned gpio + binding representation for description of particular cells. gpio-ranges: minItems: 1 maxItems: 5 - description: | + description: GPIO valid number range. interrupt-controller: true interrupts: maxItems: 1 - description: | + description: Specifies the summary IRQ. "#interrupt-cells": @@ -65,30 +56,82 @@ required: - reg-names - gpio-controller - "#gpio-cells" - - gpio-ranges - - interrupt-controller - - interrupts - - "#interrupt-cells" + +allOf: + - $ref: pinctrl.yaml# + - if: + properties: + compatible: + contains: + const: mediatek,mt6779-pinctrl + then: + properties: + reg: + minItems: 9 + maxItems: 9 + + reg-names: + items: + - const: gpio + - const: iocfg_rm + - const: iocfg_br + - const: iocfg_lm + - const: iocfg_lb + - const: iocfg_rt + - const: iocfg_lt + - const: iocfg_tl + - const: eint + - if: + properties: + compatible: + contains: + const: mediatek,mt6797-pinctrl + then: + properties: + reg: + minItems: 5 + maxItems: 5 + + reg-names: + items: + - const: gpio + - const: iocfgl + - const: iocfgb + - const: iocfgr + - const: iocfgt + - if: + properties: + reg-names: + contains: + const: eint + then: + required: + - interrupts + - interrupt-controller + - "#interrupt-cells" patternProperties: '-[0-9]*$': type: object + additionalProperties: false + patternProperties: '-pins*$': type: object - description: | + description: A pinctrl node should contain at least one subnodes representing the pinctrl groups available on the machine. Each subnode will list the pins it needs, and how they should be configured, with regard to muxer - configuration, pullups, drive strength, input enable/disable and input schmitt. - $ref: "/schemas/pinctrl/pincfg-node.yaml" + configuration, pullups, drive strength, input enable/disable and input + schmitt. + $ref: /schemas/pinctrl/pincfg-node.yaml properties: pinmux: description: - integer array, represents gpio pin number and mux setting. - Supported pin number and mux varies for different SoCs, and are defined - as macros in boot/dts/<soc>-pinfunc.h directly. + Integer array, represents gpio pin number and mux setting. + Supported pin number and mux varies for different SoCs, and are + defined as macros in dt-bindings/pinctrl/<soc>-pinfunc.h directly. bias-disable: true @@ -108,10 +151,17 @@ patternProperties: input-schmitt-disable: true + drive-strength: + enum: [2, 4, 8, 12, 16] + + slew-rate: + enum: [0, 1] + mediatek,pull-up-adv: description: | - Pull up setings for 2 pull resistors, R0 and R1. User can - configure those special pins. Valid arguments are described as below: + Pull up settings for 2 pull resistors, R0 and R1. User can + configure those special pins. Valid arguments are described as + below: 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. @@ -122,7 +172,8 @@ patternProperties: mediatek,pull-down-adv: description: | Pull down settings for 2 pull resistors, R0 and R1. User can - configure those special pins. Valid arguments are described as below: + configure those special pins. Valid arguments are described as + below: 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. diff --git a/dts/Bindings/pinctrl/mediatek,mt6795-pinctrl.yaml b/dts/Bindings/pinctrl/mediatek,mt6795-pinctrl.yaml new file mode 100644 index 0000000000..68e91c05f1 --- /dev/null +++ b/dts/Bindings/pinctrl/mediatek,mt6795-pinctrl.yaml @@ -0,0 +1,228 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/mediatek,mt6795-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT6795 Pin Controller + +maintainers: + - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> + - Sean Wang <sean.wang@kernel.org> + +description: + The MediaTek's MT6795 Pin controller is used to control SoC pins. + +properties: + compatible: + const: mediatek,mt6795-pinctrl + + gpio-controller: true + + '#gpio-cells': + description: + Number of cells in GPIO specifier. Since the generic GPIO binding is used, + the amount of cells must be specified as 2. See the below mentioned gpio + binding representation for description of particular cells. + const: 2 + + gpio-ranges: + description: GPIO valid number range. + maxItems: 1 + + reg: + description: + Physical address base for GPIO base and eint registers. + minItems: 2 + + reg-names: + items: + - const: base + - const: eint + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + + interrupts: + description: Interrupt outputs to the system interrupt controller (sysirq). + minItems: 1 + items: + - description: EINT interrupt + - description: EINT event_b interrupt + +# PIN CONFIGURATION NODES +patternProperties: + '-pins$': + type: object + additionalProperties: false + patternProperties: + '^pins': + type: object + additionalProperties: false + description: | + A pinctrl node should contain at least one subnodes representing the + pinctrl groups available on the machine. Each subnode will list the + pins it needs, and how they should be configured, with regard to muxer + configuration, pullups, drive strength, input enable/disable and input + schmitt. + An example of using macro: + pincontroller { + /* GPIO0 set as multifunction GPIO0 */ + gpio-pins { + pins { + pinmux = <PINMUX_GPIO0__FUNC_GPIO0>; + } + }; + /* GPIO45 set as multifunction SDA0 */ + i2c0-pins { + pins { + pinmux = <PINMUX_GPIO45__FUNC_SDA0>; + } + }; + }; + $ref: pinmux-node.yaml + + properties: + pinmux: + description: + Integer array, represents gpio pin number and mux setting. + Supported pin number and mux varies for different SoCs, and are + defined as macros in dt-bindings/pinctrl/<soc>-pinfunc.h directly. + + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + + bias-pull-down: + oneOf: + - type: boolean + - enum: [100, 101, 102, 103] + description: mt6795 pull down PUPD/R0/R1 type define value. + description: + For normal pull down type, it is not necessary to specify R1R0 + values; When pull down type is PUPD/R0/R1, adding R1R0 defines + will set different resistance values. + + bias-pull-up: + oneOf: + - type: boolean + - enum: [100, 101, 102, 103] + description: mt6795 pull up PUPD/R0/R1 type define value. + description: + For normal pull up type, it is not necessary to specify R1R0 + values; When pull up type is PUPD/R0/R1, adding R1R0 defines will + set different resistance values. + + bias-disable: true + + output-high: true + + output-low: true + + input-enable: true + + input-disable: true + + input-schmitt-enable: true + + input-schmitt-disable: true + + mediatek,pull-up-adv: + description: | + Pull up settings for 2 pull resistors, R0 and R1. User can + configure those special pins. Valid arguments are described as + below: + 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. + 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. + 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. + 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + + mediatek,pull-down-adv: + description: | + Pull down settings for 2 pull resistors, R0 and R1. User can + configure those special pins. Valid arguments are described as + below: + 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. + 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. + 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. + 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + + required: + - pinmux + +allOf: + - $ref: pinctrl.yaml# + +required: + - compatible + - reg + - reg-names + - interrupts + - interrupt-controller + - '#interrupt-cells' + - gpio-controller + - '#gpio-cells' + - gpio-ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/pinctrl/mt6795-pinfunc.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pio: pinctrl@10005000 { + compatible = "mediatek,mt6795-pinctrl"; + reg = <0 0x10005000 0 0x1000>, <0 0x1000b000 0 0x1000>; + reg-names = "base", "eint"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pio 0 0 196>; + interrupt-controller; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + + i2c0-pins { + pins-sda-scl { + pinmux = <PINMUX_GPIO45__FUNC_SDA0>, + <PINMUX_GPIO46__FUNC_SCL0>; + }; + }; + + mmc0-pins { + pins-cmd-dat { + pinmux = <PINMUX_GPIO154__FUNC_MSDC0_DAT0>, + <PINMUX_GPIO155__FUNC_MSDC0_DAT1>, + <PINMUX_GPIO156__FUNC_MSDC0_DAT2>, + <PINMUX_GPIO157__FUNC_MSDC0_DAT3>, + <PINMUX_GPIO158__FUNC_MSDC0_DAT4>, + <PINMUX_GPIO159__FUNC_MSDC0_DAT5>, + <PINMUX_GPIO160__FUNC_MSDC0_DAT6>, + <PINMUX_GPIO161__FUNC_MSDC0_DAT7>, + <PINMUX_GPIO162__FUNC_MSDC0_CMD>; + input-enable; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins-clk { + pinmux = <PINMUX_GPIO163__FUNC_MSDC0_CLK>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-rst { + pinmux = <PINMUX_GPIO165__FUNC_MSDC0_RSTB>; + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; + }; + }; + }; + }; diff --git a/dts/Bindings/pinctrl/mediatek,mt6797-pinctrl.yaml b/dts/Bindings/pinctrl/mediatek,mt6797-pinctrl.yaml deleted file mode 100644 index 76a6df75ed..0000000000 --- a/dts/Bindings/pinctrl/mediatek,mt6797-pinctrl.yaml +++ /dev/null @@ -1,173 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/pinctrl/mediatek,mt6797-pinctrl.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Mediatek MT6797 Pin Controller Device Tree Bindings - -maintainers: - - Sean Wang <sean.wang@kernel.org> - -description: |+ - The MediaTek's MT6797 Pin controller is used to control SoC pins. - -properties: - compatible: - const: mediatek,mt6797-pinctrl - - reg: - minItems: 5 - maxItems: 5 - - reg-names: - items: - - const: gpio - - const: iocfgl - - const: iocfgb - - const: iocfgr - - const: iocfgt - - gpio-controller: true - - "#gpio-cells": - const: 2 - description: | - Number of cells in GPIO specifier. Since the generic GPIO - binding is used, the amount of cells must be specified as 2. See the below - mentioned gpio binding representation for description of particular cells. - - interrupt-controller: true - - interrupts: - maxItems: 1 - - "#interrupt-cells": - const: 2 - -required: - - compatible - - reg - - reg-names - - gpio-controller - - "#gpio-cells" - -patternProperties: - '-[0-9]+$': - type: object - additionalProperties: false - patternProperties: - 'pins': - type: object - additionalProperties: false - description: | - A pinctrl node should contain at least one subnodes representing the - pinctrl groups available on the machine. Each subnode will list the - pins it needs, and how they should be configured, with regard to muxer - configuration, pullups, drive strength, input enable/disable and input - schmitt. - $ref: "/schemas/pinctrl/pincfg-node.yaml" - - properties: - pinmux: - description: - integer array, represents gpio pin number and mux setting. - Supported pin number and mux varies for different SoCs, and are - defined as macros in <soc>-pinfunc.h directly. - - bias-disable: true - - bias-pull-up: true - - bias-pull-down: true - - input-enable: true - - input-disable: true - - output-enable: true - - output-low: true - - output-high: true - - input-schmitt-enable: true - - input-schmitt-disable: true - - drive-strength: - enum: [2, 4, 8, 12, 16] - - slew-rate: - enum: [0, 1] - - mediatek,pull-up-adv: - description: | - Pull up setings for 2 pull resistors, R0 and R1. User can - configure those special pins. Valid arguments are described as below: - 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. - 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. - 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. - 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled. - $ref: /schemas/types.yaml#/definitions/uint32 - enum: [0, 1, 2, 3] - - mediatek,pull-down-adv: - description: | - Pull down settings for 2 pull resistors, R0 and R1. User can - configure those special pins. Valid arguments are described as below: - 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. - 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. - 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. - 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled. - $ref: /schemas/types.yaml#/definitions/uint32 - enum: [0, 1, 2, 3] - - mediatek,tdsel: - description: | - An integer describing the steps for output level shifter duty - cycle when asserted (high pulse width adjustment). Valid arguments - are from 0 to 15. - $ref: /schemas/types.yaml#/definitions/uint32 - - mediatek,rdsel: - description: | - An integer describing the steps for input level shifter duty cycle - when asserted (high pulse width adjustment). Valid arguments are - from 0 to 63. - $ref: /schemas/types.yaml#/definitions/uint32 - - required: - - pinmux - -additionalProperties: false - -examples: - - | - #include <dt-bindings/interrupt-controller/irq.h> - #include <dt-bindings/interrupt-controller/arm-gic.h> - #include <dt-bindings/pinctrl/mt6797-pinfunc.h> - - soc { - #address-cells = <2>; - #size-cells = <2>; - - pio: pinctrl@10005000 { - compatible = "mediatek,mt6797-pinctrl"; - reg = <0 0x10005000 0 0x1000>, - <0 0x10002000 0 0x400>, - <0 0x10002400 0 0x400>, - <0 0x10002800 0 0x400>, - <0 0x10002C00 0 0x400>; - reg-names = "gpio", "iocfgl", "iocfgb", "iocfgr", "iocfgt"; - gpio-controller; - #gpio-cells = <2>; - - uart_pins_a: uart-0 { - pins1 { - pinmux = <MT6797_GPIO232__FUNC_URXD1>, - <MT6797_GPIO233__FUNC_UTXD1>; - }; - }; - }; - }; diff --git a/dts/Bindings/pinctrl/mediatek,mt7620-pinctrl.yaml b/dts/Bindings/pinctrl/mediatek,mt7620-pinctrl.yaml new file mode 100644 index 0000000000..591bc0664e --- /dev/null +++ b/dts/Bindings/pinctrl/mediatek,mt7620-pinctrl.yaml @@ -0,0 +1,298 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/mediatek,mt7620-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT7620 Pin Controller + +maintainers: + - Arınç ÜNAL <arinc.unal@arinc9.com> + - Sergio Paracuellos <sergio.paracuellos@gmail.com> + +description: | + MediaTek MT7620 pin controller for MT7620 SoC. + The pin controller can only set the muxing of pin groups. Muxing individual + pins is not supported. There is no pinconf support. + +properties: + compatible: + const: ralink,mt7620-pinctrl + +patternProperties: + '-pins$': + type: object + additionalProperties: false + + patternProperties: + '^(.*-)?pinmux$': + type: object + description: node for pinctrl. + $ref: pinmux-node.yaml# + additionalProperties: false + + properties: + function: + description: + A string containing the name of the function to mux to the group. + enum: [ephy, gpio, gpio i2s, gpio uartf, i2c, i2s uartf, mdio, nand, + pa, pcie refclk, pcie rst, pcm gpio, pcm i2s, pcm uartf, + refclk, rgmii1, rgmii2, sd, spi, spi refclk, uartf, uartlite, + wdt refclk, wdt rst, wled] + + groups: + description: + An array of strings. Each string contains the name of a group. + maxItems: 1 + + required: + - groups + - function + + allOf: + - if: + properties: + function: + const: ephy + then: + properties: + groups: + enum: [ephy] + + - if: + properties: + function: + const: gpio + then: + properties: + groups: + enum: [ephy, i2c, mdio, nd_sd, pa, pcie, rgmii1, rgmii2, spi, + spi refclk, uartf, uartlite, wdt, wled] + + - if: + properties: + function: + const: gpio i2s + then: + properties: + groups: + enum: [uartf] + + - if: + properties: + function: + const: gpio uartf + then: + properties: + groups: + enum: [uartf] + + - if: + properties: + function: + const: i2c + then: + properties: + groups: + enum: [i2c] + + - if: + properties: + function: + const: i2s uartf + then: + properties: + groups: + enum: [uartf] + + - if: + properties: + function: + const: mdio + then: + properties: + groups: + enum: [mdio] + + - if: + properties: + function: + const: nand + then: + properties: + groups: + enum: [nd_sd] + + - if: + properties: + function: + const: pa + then: + properties: + groups: + enum: [pa] + + - if: + properties: + function: + const: pcie refclk + then: + properties: + groups: + enum: [pcie] + + - if: + properties: + function: + const: pcie rst + then: + properties: + groups: + enum: [pcie] + + - if: + properties: + function: + const: pcm gpio + then: + properties: + groups: + enum: [uartf] + + - if: + properties: + function: + const: pcm i2s + then: + properties: + groups: + enum: [uartf] + + - if: + properties: + function: + const: pcm uartf + then: + properties: + groups: + enum: [uartf] + + - if: + properties: + function: + const: refclk + then: + properties: + groups: + enum: [mdio] + + - if: + properties: + function: + const: rgmii1 + then: + properties: + groups: + enum: [rgmii1] + + - if: + properties: + function: + const: rgmii2 + then: + properties: + groups: + enum: [rgmii2] + + - if: + properties: + function: + const: sd + then: + properties: + groups: + enum: [nd_sd] + + - if: + properties: + function: + const: spi + then: + properties: + groups: + enum: [spi] + + - if: + properties: + function: + const: spi refclk + then: + properties: + groups: + enum: [spi refclk] + + - if: + properties: + function: + const: uartf + then: + properties: + groups: + enum: [uartf] + + - if: + properties: + function: + const: uartlite + then: + properties: + groups: + enum: [uartlite] + + - if: + properties: + function: + const: wdt refclk + then: + properties: + groups: + enum: [wdt] + + - if: + properties: + function: + const: wdt rst + then: + properties: + groups: + enum: [wdt] + + - if: + properties: + function: + const: wled + then: + properties: + groups: + enum: [wled] + +allOf: + - $ref: pinctrl.yaml# + +required: + - compatible + +additionalProperties: false + +examples: + - | + pinctrl { + compatible = "ralink,mt7620-pinctrl"; + + i2c_pins: i2c0-pins { + pinmux { + groups = "i2c"; + function = "i2c"; + }; + }; + }; diff --git a/dts/Bindings/pinctrl/mediatek,mt7621-pinctrl.yaml b/dts/Bindings/pinctrl/mediatek,mt7621-pinctrl.yaml new file mode 100644 index 0000000000..e568b9c137 --- /dev/null +++ b/dts/Bindings/pinctrl/mediatek,mt7621-pinctrl.yaml @@ -0,0 +1,261 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/mediatek,mt7621-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT7621 Pin Controller + +maintainers: + - Arınç ÜNAL <arinc.unal@arinc9.com> + - Sergio Paracuellos <sergio.paracuellos@gmail.com> + +description: | + MediaTek MT7621 pin controller for MT7621 SoC. + The pin controller can only set the muxing of pin groups. Muxing individual + pins is not supported. There is no pinconf support. + +properties: + compatible: + const: ralink,mt7621-pinctrl + +patternProperties: + '-pins$': + type: object + additionalProperties: false + + patternProperties: + '^(.*-)?pinmux$': + type: object + description: node for pinctrl. + $ref: pinmux-node.yaml# + additionalProperties: false + + properties: + function: + description: + A string containing the name of the function to mux to the group. + enum: [gpio, i2c, i2s, jtag, mdio, nand1, nand2, pcie refclk, + pcie rst, pcm, rgmii1, rgmii2, sdhci, spdif2, spdif3, spi, + uart1, uart2, uart3, wdt refclk, wdt rst] + + groups: + description: + An array of strings. Each string contains the name of a group. + maxItems: 1 + + required: + - groups + - function + + allOf: + - if: + properties: + function: + const: gpio + then: + properties: + groups: + enum: [i2c, jtag, mdio, pcie, rgmii1, rgmii2, sdhci, spi, + uart1, uart2, uart3, wdt] + + - if: + properties: + function: + const: i2c + then: + properties: + groups: + enum: [i2c] + + - if: + properties: + function: + const: i2s + then: + properties: + groups: + enum: [uart3] + + - if: + properties: + function: + const: jtag + then: + properties: + groups: + enum: [jtag] + + - if: + properties: + function: + const: mdio + then: + properties: + groups: + enum: [mdio] + + - if: + properties: + function: + const: nand1 + then: + properties: + groups: + enum: [spi] + + - if: + properties: + function: + const: nand2 + then: + properties: + groups: + enum: [sdhci] + + - if: + properties: + function: + const: pcie refclk + then: + properties: + groups: + enum: [pcie] + + - if: + properties: + function: + const: pcie rst + then: + properties: + groups: + enum: [pcie] + + - if: + properties: + function: + const: pcm + then: + properties: + groups: + enum: [uart2] + + - if: + properties: + function: + const: rgmii1 + then: + properties: + groups: + enum: [rgmii1] + + - if: + properties: + function: + const: rgmii2 + then: + properties: + groups: + enum: [rgmii2] + + - if: + properties: + function: + const: sdhci + then: + properties: + groups: + enum: [sdhci] + + - if: + properties: + function: + const: spdif2 + then: + properties: + groups: + enum: [uart2] + + - if: + properties: + function: + const: spdif3 + then: + properties: + groups: + enum: [uart3] + + - if: + properties: + function: + const: spi + then: + properties: + groups: + enum: [spi] + + - if: + properties: + function: + const: uart1 + then: + properties: + groups: + enum: [uart1] + + - if: + properties: + function: + const: uart2 + then: + properties: + groups: + enum: [uart2] + + - if: + properties: + function: + const: uart3 + then: + properties: + groups: + enum: [uart3] + + - if: + properties: + function: + const: wdt refclk + then: + properties: + groups: + enum: [wdt] + + - if: + properties: + function: + const: wdt rst + then: + properties: + groups: + enum: [wdt] + +allOf: + - $ref: pinctrl.yaml# + +required: + - compatible + +additionalProperties: false + +examples: + - | + pinctrl { + compatible = "ralink,mt7621-pinctrl"; + + i2c_pins: i2c0-pins { + pinmux { + groups = "i2c"; + function = "i2c"; + }; + }; + }; diff --git a/dts/Bindings/pinctrl/mediatek,mt7622-pinctrl.yaml b/dts/Bindings/pinctrl/mediatek,mt7622-pinctrl.yaml index 0feecd376c..bd72a326e6 100644 --- a/dts/Bindings/pinctrl/mediatek,mt7622-pinctrl.yaml +++ b/dts/Bindings/pinctrl/mediatek,mt7622-pinctrl.yaml @@ -4,12 +4,12 @@ $id: http://devicetree.org/schemas/pinctrl/mediatek,mt7622-pinctrl.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Mediatek MT7622 Pin Controller Device Tree Bindings +title: MediaTek MT7622 Pin Controller maintainers: - Sean Wang <sean.wang@kernel.org> -description: |+ +description: The MediaTek's MT7622 Pin controller is used to control SoC pins. properties: @@ -29,10 +29,10 @@ properties: "#gpio-cells": const: 2 - description: | - Number of cells in GPIO specifier. Since the generic GPIO - binding is used, the amount of cells must be specified as 2. See the below - mentioned gpio binding representation for description of particular cells. + description: + Number of cells in GPIO specifier. Since the generic GPIO binding is used, + the amount of cells must be specified as 2. See the below mentioned gpio + binding representation for description of particular cells. interrupt-controller: true @@ -42,6 +42,9 @@ properties: "#interrupt-cells": const: 2 +allOf: + - $ref: pinctrl.yaml# + required: - compatible - reg @@ -58,25 +61,25 @@ then: - "#interrupt-cells" patternProperties: - '-[0-9]+$': + '-pins(-[a-z]+)?$': type: object additionalProperties: false patternProperties: - 'mux': + '^mux(-|$)': type: object additionalProperties: false - description: | + description: pinmux configuration nodes. - $ref: "/schemas/pinctrl/pinmux-node.yaml" + $ref: /schemas/pinctrl/pinmux-node.yaml properties: function: - description: | + description: A string containing the name of the function to mux to the group. enum: [emmc, eth, i2c, i2s, ir, led, flash, pcie, pmic, pwm, sd, spi, tdm, uart, watchdog, wifi] groups: - description: | + description: An array of strings. Each string contains the name of a group. drive-strength: @@ -241,21 +244,21 @@ patternProperties: groups: enum: [wf0_2g, wf0_5g] - 'conf': + '^conf(-|$)': type: object additionalProperties: false - description: | + description: pinconf configuration nodes. - $ref: "/schemas/pinctrl/pincfg-node.yaml" + $ref: /schemas/pinctrl/pincfg-node.yaml properties: groups: - description: | + description: An array of strings. Each string contains the name of a group. Valid values are the same as the pinmux node. pins: - description: | + description: An array of strings. Each string contains the name of a pin. enum: [GPIO_A, I2S1_IN, I2S1_OUT, I2S_BCLK, I2S_WS, I2S_MCLK, TXD0, RXD0, SPI_WP, SPI_HOLD, SPI_CLK, SPI_MOSI, SPI_MISO, SPI_CS, @@ -312,14 +315,14 @@ patternProperties: enum: [0, 1] mediatek,tdsel: - description: | + description: An integer describing the steps for output level shifter duty cycle when asserted (high pulse width adjustment). Valid arguments are from 0 to 15. $ref: /schemas/types.yaml#/definitions/uint32 mediatek,rdsel: - description: | + description: An integer describing the steps for input level shifter duty cycle when asserted (high pulse width adjustment). Valid arguments are from 0 to 63. @@ -345,7 +348,7 @@ examples: gpio-controller; #gpio-cells = <2>; - pinctrl_eth_default: eth-0 { + pinctrl_eth_default: eth-pins { mux-mdio { groups = "mdc_mdio"; function = "eth"; diff --git a/dts/Bindings/pinctrl/mediatek,mt76x8-pinctrl.yaml b/dts/Bindings/pinctrl/mediatek,mt76x8-pinctrl.yaml new file mode 100644 index 0000000000..31849dd594 --- /dev/null +++ b/dts/Bindings/pinctrl/mediatek,mt76x8-pinctrl.yaml @@ -0,0 +1,450 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/mediatek,mt76x8-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT76X8 Pin Controller + +maintainers: + - Arınç ÜNAL <arinc.unal@arinc9.com> + - Sergio Paracuellos <sergio.paracuellos@gmail.com> + +description: | + MediaTek MT76X8 pin controller for MT7628 and MT7688 SoCs. + The pin controller can only set the muxing of pin groups. Muxing individual + pins is not supported. There is no pinconf support. + +properties: + compatible: + const: ralink,mt76x8-pinctrl + +patternProperties: + '-pins$': + type: object + additionalProperties: false + + patternProperties: + '^(.*-)?pinmux$': + type: object + description: node for pinctrl. + $ref: pinmux-node.yaml# + additionalProperties: false + + properties: + function: + description: + A string containing the name of the function to mux to the group. + enum: [antenna, debug, gpio, i2c, i2s, jtag, p0led_an, p0led_kn, + p1led_an, p1led_kn, p2led_an, p2led_kn, p3led_an, p3led_kn, + p4led_an, p4led_kn, pcie, pcm, perst, pwm, pwm0, pwm1, + pwm_uart2, refclk, rsvd, sdxc, sdxc d5 d4, sdxc d6, sdxc d7, + spi, spi cs1, spis, sw_r, uart0, uart1, uart2, utif, wdt, + wled_an, wled_kn, -] + + groups: + description: + An array of strings. Each string contains the name of a group. + maxItems: 1 + + required: + - groups + - function + + allOf: + - if: + properties: + function: + const: antenna + then: + properties: + groups: + enum: [i2s] + + - if: + properties: + function: + const: debug + then: + properties: + groups: + enum: [i2c] + + - if: + properties: + function: + const: gpio + then: + properties: + groups: + enum: [gpio, i2c, i2s, p0led_an, p0led_kn, p1led_an, p1led_kn, + p2led_an, p2led_kn, p3led_an, p3led_kn, p4led_an, + p4led_kn, perst, pwm0, pwm1, refclk, sdmode, spi, + spi cs1, spis, uart0, uart1, uart2, wdt, wled_an, + wled_kn] + + - if: + properties: + function: + const: i2c + then: + properties: + groups: + enum: [i2c] + + - if: + properties: + function: + const: i2s + then: + properties: + groups: + enum: [i2s] + + - if: + properties: + function: + const: jtag + then: + properties: + groups: + enum: [p0led_an, p0led_kn, p1led_an, p1led_kn, p2led_an, + p2led_kn, p3led_an, p3led_kn, p4led_an, p4led_kn, + sdmode] + + - if: + properties: + function: + const: p0led_an + then: + properties: + groups: + enum: [p0led_an] + + - if: + properties: + function: + const: p0led_kn + then: + properties: + groups: + enum: [p0led_kn] + + - if: + properties: + function: + const: p1led_an + then: + properties: + groups: + enum: [p1led_an] + + - if: + properties: + function: + const: p1led_kn + then: + properties: + groups: + enum: [p1led_kn] + + - if: + properties: + function: + const: p2led_an + then: + properties: + groups: + enum: [p2led_an] + + - if: + properties: + function: + const: p2led_kn + then: + properties: + groups: + enum: [p2led_kn] + + - if: + properties: + function: + const: p3led_an + then: + properties: + groups: + enum: [p3led_an] + + - if: + properties: + function: + const: p3led_kn + then: + properties: + groups: + enum: [p3led_kn] + + - if: + properties: + function: + const: p4led_an + then: + properties: + groups: + enum: [p4led_an] + + - if: + properties: + function: + const: p4led_kn + then: + properties: + groups: + enum: [p4led_kn] + + - if: + properties: + function: + const: pcie + then: + properties: + groups: + enum: [gpio] + + - if: + properties: + function: + const: pcm + then: + properties: + groups: + enum: [i2s] + + - if: + properties: + function: + const: perst + then: + properties: + groups: + enum: [perst] + + - if: + properties: + function: + const: pwm + then: + properties: + groups: + enum: [uart1, uart2] + + - if: + properties: + function: + const: pwm0 + then: + properties: + groups: + enum: [pwm0] + + - if: + properties: + function: + const: pwm1 + then: + properties: + groups: + enum: [pwm1] + + - if: + properties: + function: + const: pwm_uart2 + then: + properties: + groups: + enum: [spis] + + - if: + properties: + function: + const: refclk + then: + properties: + groups: + enum: [gpio, refclk, spi cs1] + + - if: + properties: + function: + const: rsvd + then: + properties: + groups: + enum: [p0led_an, p0led_kn, wled_an, wled_kn] + + - if: + properties: + function: + const: sdxc + then: + properties: + groups: + enum: [sdmode] + + - if: + properties: + function: + const: sdxc d5 d4 + then: + properties: + groups: + enum: [uart2] + + - if: + properties: + function: + const: sdxc d6 + then: + properties: + groups: + enum: [pwm1] + + - if: + properties: + function: + const: sdxc d7 + then: + properties: + groups: + enum: [pwm0] + + - if: + properties: + function: + const: spi + then: + properties: + groups: + enum: [spi] + + - if: + properties: + function: + const: spi cs1 + then: + properties: + groups: + enum: [spi cs1] + + - if: + properties: + function: + const: spis + then: + properties: + groups: + enum: [spis] + + - if: + properties: + function: + const: sw_r + then: + properties: + groups: + enum: [uart1] + + - if: + properties: + function: + const: uart0 + then: + properties: + groups: + enum: [uart0] + + - if: + properties: + function: + const: uart1 + then: + properties: + groups: + enum: [uart1] + + - if: + properties: + function: + const: uart2 + then: + properties: + groups: + enum: [uart2] + + - if: + properties: + function: + const: utif + then: + properties: + groups: + enum: [p1led_an, p1led_kn, p2led_an, p2led_kn, p3led_an, + p3led_kn, p4led_an, p4led_kn, pwm0, pwm1, sdmode, spis] + + - if: + properties: + function: + const: wdt + then: + properties: + groups: + enum: [wdt] + + - if: + properties: + function: + const: wled_an + then: + properties: + groups: + enum: [wled_an] + + - if: + properties: + function: + const: wled_kn + then: + properties: + groups: + enum: [wled_kn] + + - if: + properties: + function: + const: "-" + then: + properties: + groups: + enum: [i2c, spi cs1, uart0] + +allOf: + - $ref: pinctrl.yaml# + +required: + - compatible + +additionalProperties: false + +examples: + - | + pinctrl { + compatible = "ralink,mt76x8-pinctrl"; + + i2c_pins: i2c0-pins { + pinmux { + groups = "i2c"; + function = "i2c"; + }; + }; + }; diff --git a/dts/Bindings/pinctrl/mediatek,mt7981-pinctrl.yaml b/dts/Bindings/pinctrl/mediatek,mt7981-pinctrl.yaml new file mode 100644 index 0000000000..74d52a741f --- /dev/null +++ b/dts/Bindings/pinctrl/mediatek,mt7981-pinctrl.yaml @@ -0,0 +1,480 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/mediatek,mt7981-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT7981 Pin Controller + +maintainers: + - Daniel Golle <daniel@makrotopia.org> + +description: + The MediaTek's MT7981 Pin controller is used to control SoC pins. + +properties: + compatible: + enum: + - mediatek,mt7981-pinctrl + + reg: + minItems: 9 + maxItems: 9 + + reg-names: + items: + - const: gpio + - const: iocfg_rt + - const: iocfg_rm + - const: iocfg_rb + - const: iocfg_lb + - const: iocfg_bl + - const: iocfg_tm + - const: iocfg_tl + - const: eint + + gpio-controller: true + + "#gpio-cells": + const: 2 + description: + Number of cells in GPIO specifier. Since the generic GPIO binding is used, + the amount of cells must be specified as 2. See the below mentioned gpio + binding representation for description of particular cells. + + gpio-ranges: + minItems: 1 + maxItems: 5 + description: GPIO valid number range. + + interrupt-controller: true + + interrupts: + maxItems: 1 + + "#interrupt-cells": + const: 2 + +allOf: + - $ref: pinctrl.yaml# + +required: + - compatible + - reg + - reg-names + - gpio-controller + - "#gpio-cells" + +patternProperties: + '-pins$': + type: object + additionalProperties: false + + patternProperties: + '^.*mux.*$': + type: object + additionalProperties: false + description: | + pinmux configuration nodes. + + The following table shows the effective values of "group", "function" + properties and chip pinout pins + + groups function pins (in pin#) + --------------------------------------------------------------------- + "wa_aice1" "wa_aice" 0, 1 + "wa_aice2" "wa_aice" 0, 1 + "wm_uart_0" "uart" 0, 1 + "dfd" "dfd" 0, 1, 4, 5 + "watchdog" "watchdog" 2 + "pcie_pereset" "pcie" 3 + "jtag" "jtag" 4, 5, 6, 7, 8 + "wm_jtag_0" "jtag" 4, 5, 6, 7, 8 + "wo0_jtag_0" "jtag" 9, 10, 11, 12, 13 + "uart2_0" "uart" 4, 5, 6, 7 + "gbe_led0" "led" 8 + "pta_ext_0" "pta" 4, 5, 6 + "pwm2" "pwm" 7 + "net_wo0_uart_txd_0" "uart" 8 + "spi1_0" "spi" 4, 5, 6, 7 + "i2c0_0" "i2c" 6, 7 + "dfd_ntrst" "dfd" 8 + "wm_aice1" "wa_aice" 9, 10 + "pwm0_0" "pwm" 13 + "pwm0_1" "pwm" 15 + "pwm1_0" "pwm" 14 + "pwm1_1" "pwm" 15 + "net_wo0_uart_txd_1" "uart" 14 + "net_wo0_uart_txd_2" "uart" 15 + "gbe_led1" "led" 13 + "pcm" "pcm" 9, 10, 11, 12, 13, 25 + "watchdog1" "watchdog" 13 + "udi" "udi" 9, 10, 11, 12, 13 + "drv_vbus" "usb" 14 + "emmc_45" "flash" 15, 16, 17, 18, 19, 20, 21, 22, 23, + 24, 25 + + "snfi" "flash" 16, 17, 18, 19, 20, 21 + "spi0" "spi" 16, 17, 18, 19 + "spi0_wp_hold" "spi" 20, 21 + "spi1_1" "spi" 22, 23, 24, 25 + "spi2" "spi" 26, 27, 28, 29 + "spi2_wp_hold" "spi" 30, 31 + "uart1_0" "uart" 16, 17, 18, 19 + "uart1_1" "uart" 26, 27, 28, 29 + "uart2_1" "uart" 22, 23, 24, 25 + "pta_ext_1" "pta" 22, 23, 24 + "wm_aurt_1" "uart" 20, 21 + "wm_aurt_2" "uart" 30, 31 + "wm_jtag_1" "jtag" 20, 21, 22, 23, 24 + "wo0_jtag_1" "jtag" 25, 26, 27, 28, 29 + "wa_aice3" "wa_aice" 28, 20 + "wm_aice2" "wa_aice" 30, 31 + "i2c0_1" "i2c" 30, 31 + "u2_phy_i2c" "i2c" 30, 31 + "uart0" "uart" 32, 33 + "sgmii1_phy_i2c" "i2c" 32, 33 + "u3_phy_i2c" "i2c" 32, 33 + "sgmii0_phy_i2c" "i2c" 32, 33 + "pcie_clk" "pcie" 34 + "pcie_wake" "pcie" 35 + "i2c0_2" "i2c" 36, 37 + "smi_mdc_mdio" "eth" 36, 37 + "gbe_ext_mdc_mdio" "eth" 36, 37 + "wf0_mode1" "eth" 40, 41, 42, 43, 44, 45, 46, 47, 48, + 49, 50, 51, 52, 53, 54, 55, 56 + + "wf0_mode3" "eth" 45, 46, 47, 48, 49, 51 + "wf2g_led0" "led" 30 + "wf2g_led1" "led" 34 + "wf5g_led0" "led" 31 + "wf5g_led1" "led" 35 + "mt7531_int" "eth" 38 + "ant_sel" "ant" 14, 15, 16, 17, 18, 19, 20, 21, 22, + 23, 24, 25, 34, 35 + + $ref: /schemas/pinctrl/pinmux-node.yaml + properties: + function: + description: + A string containing the name of the function to mux to the group. + enum: [wa_aice, dfd, jtag, pta, pcm, udi, usb, ant, eth, i2c, led, + pwm, spi, uart, watchdog, flash, pcie] + groups: + description: + An array of strings. Each string contains the name of a group. + + required: + - function + - groups + + allOf: + - if: + properties: + function: + const: wa_aice + then: + properties: + groups: + enum: [wa_aice1, wa_aice2, wm_aice1_1, wa_aice3, wm_aice1_2] + - if: + properties: + function: + const: dfd + then: + properties: + groups: + enum: [dfd, dfd_ntrst] + - if: + properties: + function: + const: jtag + then: + properties: + groups: + enum: [jtag, wm_jtag_0, wo0_jtag_0, wo0_jtag_1, wm_jtag_1] + - if: + properties: + function: + const: pta + then: + properties: + groups: + enum: [pta_ext_0, pta_ext_1] + - if: + properties: + function: + const: pcm + then: + properties: + groups: + enum: [pcm] + - if: + properties: + function: + const: udi + then: + properties: + groups: + enum: [udi] + - if: + properties: + function: + const: usb + then: + properties: + groups: + enum: [drv_vbus] + - if: + properties: + function: + const: ant + then: + properties: + groups: + enum: [ant_sel] + - if: + properties: + function: + const: eth + then: + properties: + groups: + enum: [smi_mdc_mdio, gbe_ext_mdc_mdio, wf0_mode1, wf0_mode3, + mt7531_int] + - if: + properties: + function: + const: i2c + then: + properties: + groups: + enum: [i2c0_0, i2c0_1, u2_phy_i2c, sgmii1_phy_i2c, u3_phy_i2c, + sgmii0_phy_i2c, i2c0_2] + - if: + properties: + function: + const: led + then: + properties: + groups: + enum: [gbe_led0, gbe_led1, wf2g_led0, wf2g_led1, wf5g_led0, + wf5g_led1] + - if: + properties: + function: + const: pwm + then: + properties: + groups: + items: + enum: [pwm2, pwm0_0, pwm0_1, pwm1_0, pwm1_1] + maxItems: 3 + - if: + properties: + function: + const: spi + then: + properties: + groups: + items: + enum: [spi1_0, spi0, spi0_wp_hold, spi1_1, spi2, + spi2_wp_hold] + maxItems: 4 + - if: + properties: + function: + const: uart + then: + properties: + groups: + items: + enum: [wm_uart_0, uart2_0, net_wo0_uart_txd_0, + net_wo0_uart_txd_1, net_wo0_uart_txd_2, uart1_0, + uart1_1, uart2_1, wm_aurt_1, wm_aurt_2, uart0] + - if: + properties: + function: + const: watchdog + then: + properties: + groups: + enum: [watchdog] + - if: + properties: + function: + const: flash + then: + properties: + groups: + items: + enum: [emmc_45, snfi] + maxItems: 1 + - if: + properties: + function: + const: pcie + then: + properties: + groups: + items: + enum: [pcie_clk, pcie_wake, pcie_pereset] + maxItems: 3 + + '^.*conf.*$': + type: object + additionalProperties: false + description: pinconf configuration nodes. + $ref: /schemas/pinctrl/pincfg-node.yaml + + properties: + pins: + description: + An array of strings. Each string contains the name of a pin. + items: + enum: [GPIO_WPS, GPIO_RESET, SYS_WATCHDOG, PCIE_PERESET_N, + JTAG_JTDO, JTAG_JTDI, JTAG_JTMS, JTAG_JTCLK, JTAG_JTRST_N, + WO_JTAG_JTDO, WO_JTAG_JTDI, WO_JTAG_JTMS, WO_JTAG_JTCLK, + WO_JTAG_JTRST_N, USB_VBUS, PWM0, SPI0_CLK, SPI0_MOSI, + SPI0_MISO, SPI0_CS, SPI0_HOLD, SPI0_WP, SPI1_CLK, + SPI1_MOSI, SPI1_MISO, SPI1_CS, SPI2_CLK, SPI2_MOSI, + SPI2_MISO, SPI2_CS, SPI2_HOLD, SPI2_WP, UART0_RXD, + UART0_TXD, PCIE_CLK_REQ, PCIE_WAKE_N, SMI_MDC, SMI_MDIO, + GBE_INT, GBE_RESET, WF_DIG_RESETB, WF_CBA_RESETB, + WF_XO_REQ, WF_TOP_CLK, WF_TOP_DATA, WF_HB1, WF_HB2, WF_HB3, + WF_HB4, WF_HB0, WF_HB0_B, WF_HB5, WF_HB6, WF_HB7, WF_HB8, + WF_HB9, WF_HB10] + maxItems: 57 + + bias-disable: true + + bias-pull-up: + oneOf: + - type: boolean + description: normal pull up. + - enum: [100, 101, 102, 103] + description: + PUPD/R1/R0 pull down type. See MTK_PUPD_SET_R1R0 defines in + dt-bindings/pinctrl/mt65xx.h. + + bias-pull-down: + oneOf: + - type: boolean + description: normal pull down. + - enum: [100, 101, 102, 103] + description: + PUPD/R1/R0 pull down type. See MTK_PUPD_SET_R1R0 defines in + dt-bindings/pinctrl/mt65xx.h. + + input-enable: true + + input-disable: true + + output-enable: true + + output-low: true + + output-high: true + + input-schmitt-enable: true + + input-schmitt-disable: true + + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + + mediatek,pull-up-adv: + description: | + Valid arguments for 'mediatek,pull-up-adv' are '0', '1', '2', '3' + Pull up settings for 2 pull resistors, R0 and R1. Valid arguments + are described as below: + 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. + 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. + 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. + 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + + mediatek,pull-down-adv: + description: | + Valid arguments for 'mediatek,pull-up-adv' are '0', '1', '2', '3' + Pull down settings for 2 pull resistors, R0 and R1. Valid arguments + are described as below: + 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. + 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. + 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. + 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + + required: + - pins + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/pinctrl/mt65xx.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + pio: pinctrl@11d00000 { + compatible = "mediatek,mt7981-pinctrl"; + reg = <0 0x11d00000 0 0x1000>, + <0 0x11c00000 0 0x1000>, + <0 0x11c10000 0 0x1000>, + <0 0x11d20000 0 0x1000>, + <0 0x11e00000 0 0x1000>, + <0 0x11e20000 0 0x1000>, + <0 0x11f00000 0 0x1000>, + <0 0x11f10000 0 0x1000>, + <0 0x1000b000 0 0x1000>; + reg-names = "gpio", "iocfg_rt", "iocfg_rm", + "iocfg_rb", "iocfg_lb", "iocfg_bl", + "iocfg_tm", "iocfg_tl", "eint"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pio 0 0 56>; + interrupt-controller; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + #interrupt-cells = <2>; + + mdio_pins: mdio-pins { + mux { + function = "eth"; + groups = "smi_mdc_mdio"; + }; + }; + + spi0_flash_pins: spi0-pins { + mux { + function = "spi"; + groups = "spi0", "spi0_wp_hold"; + }; + + conf-pu { + pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP"; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_11>; + }; + + conf-pd { + pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO"; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_11>; + }; + }; + + pcie_pins: pcie-pins { + mux { + function = "pcie"; + groups = "pcie_clk", "pcie_wake", "pcie_pereset"; + }; + }; + + }; + }; diff --git a/dts/Bindings/pinctrl/mediatek,mt7986-pinctrl.yaml b/dts/Bindings/pinctrl/mediatek,mt7986-pinctrl.yaml new file mode 100644 index 0000000000..5ad65135fe --- /dev/null +++ b/dts/Bindings/pinctrl/mediatek,mt7986-pinctrl.yaml @@ -0,0 +1,462 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/mediatek,mt7986-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT7986 Pin Controller + +maintainers: + - Sean Wang <sean.wang@kernel.org> + +description: + The MediaTek's MT7986 Pin controller is used to control SoC pins. + +properties: + compatible: + enum: + - mediatek,mt7986a-pinctrl + - mediatek,mt7986b-pinctrl + + reg: + minItems: 8 + maxItems: 8 + + reg-names: + items: + - const: gpio + - const: iocfg_rt + - const: iocfg_rb + - const: iocfg_lt + - const: iocfg_lb + - const: iocfg_tr + - const: iocfg_tl + - const: eint + + gpio-controller: true + + "#gpio-cells": + const: 2 + description: + Number of cells in GPIO specifier. Since the generic GPIO binding is used, + the amount of cells must be specified as 2. See the below mentioned gpio + binding representation for description of particular cells. + + gpio-ranges: + minItems: 1 + maxItems: 5 + description: + GPIO valid number range. + + interrupt-controller: true + + interrupts: + maxItems: 1 + + "#interrupt-cells": + const: 2 + +allOf: + - $ref: pinctrl.yaml# + +required: + - compatible + - reg + - reg-names + - gpio-controller + - "#gpio-cells" + +patternProperties: + '-pins$': + type: object + additionalProperties: false + + patternProperties: + '^.*mux.*$': + type: object + additionalProperties: false + description: | + pinmux configuration nodes. + + The following table shows the effective values of "group", "function" + properties and chip pinout pins + + groups function pins (in pin#) + --------------------------------------------------------------------- + "watchdog" "watchdog" 0 + "wifi_led" "led" 1, 2 + "i2c" "i2c" 3, 4 + "uart1_0" "uart" 7, 8, 9, 10 + "uart1_rx_tx" "uart" 42, 43 + "uart1_cts_rts" "uart" 44, 45 + "pcie_clk" "pcie" 9 + "pcie_wake" "pcie" 10 + "spi1_0" "spi" 11, 12, 13, 14 + "pwm1_1" "pwm" 20, + "pwm0" "pwm" 21, + "pwm1_0" "pwm" 22, + "snfi" "flash" 23, 24, 25, 26, 27, 28 + "spi1_2" "spi" 29, 30, 31, 32 + "emmc_45" "emmc" 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, + 32 + + "spi1_1" "spi" 23, 24, 25, 26 + "uart1_2_rx_tx" "uart" 29, 30 + "uart1_2_cts_rts" "uart" 31, 32 + "uart1_1" "uart" 23, 24, 25, 26 + "uart2_0_rx_tx" "uart" 29, 30 + "uart2_0_cts_rts" "uart" 31, 32 + "spi0" "spi" 33, 34, 35, 36 + "spi0_wp_hold" "spi" 37, 38 + "uart1_3_rx_tx" "uart" 35, 36 + "uart1_3_cts_rts" "uart" 37, 38 + "uart2_1" "uart" 33, 34, 35, 36 + "spi1_3" "spi" 33, 34, 35, 36 + "uart0" "uart" 39, 40 + "pcie_pereset" "pcie" 41 + "uart1" "uart" 42, 43, 44, 45 + "uart2" "uart" 46, 47, 48, 49 + "emmc_51" "emmc" 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, + 60, 61 + + "pcm" "audio" 62, 63, 64, 65 + "i2s" "audio" 62, 63, 64, 65 + "switch_int" "eth" 66 + "mdc_mdio" "eth" 67 + "wf_2g" "wifi" 74, 75, 76, 77, 78, 79, 80, 81, 82, 83 + "wf_5g" "wifi" 91, 92, 93, 94, 95, 96, 97, 98, 99, 100 + "wf_dbdc" "wifi" 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, + 84, 85 + + $ref: /schemas/pinctrl/pinmux-node.yaml + properties: + function: + description: + A string containing the name of the function to mux to the group. + There is no "audio", "pcie" functions on mt7986b, you can only use + those functions on mt7986a. + enum: [audio, emmc, eth, i2c, led, flash, pcie, pwm, spi, uart, + watchdog, wifi] + groups: + description: + An array of strings. Each string contains the name of a group. + There is no "pcie_pereset", "uart1", "uart2" "emmc_51", "pcm", and + "i2s" groups on mt7986b, you can only use those groups on mt7986a. + required: + - function + - groups + + allOf: + - if: + properties: + function: + const: audio + then: + properties: + groups: + enum: [pcm, i2s] + - if: + properties: + function: + const: emmc + then: + properties: + groups: + enum: [emmc_45, emmc_51] + - if: + properties: + function: + const: eth + then: + properties: + groups: + enum: [switch_int, mdc_mdio] + - if: + properties: + function: + const: i2c + then: + properties: + groups: + enum: [i2c] + - if: + properties: + function: + const: led + then: + properties: + groups: + enum: [wifi_led] + - if: + properties: + function: + const: flash + then: + properties: + groups: + enum: [snfi] + - if: + properties: + function: + const: pcie + then: + properties: + groups: + items: + enum: [pcie_clk, pcie_wake, pcie_pereset] + maxItems: 3 + - if: + properties: + function: + const: pwm + then: + properties: + groups: + items: + enum: [pwm0, pwm1_0, pwm1_1] + maxItems: 2 + - if: + properties: + function: + const: spi + then: + properties: + groups: + items: + enum: [spi0, spi0_wp_hold, spi1_0, spi1_1, spi1_2, spi1_3] + maxItems: 2 + - if: + properties: + function: + const: uart + then: + properties: + groups: + items: + enum: [uart1_0, uart1_rx_tx, uart1_cts_rts, uart1_1, + uart1_2_rx_tx, uart1_2_cts_rts, uart1_3_rx_tx, + uart1_3_cts_rts, uart2_0_rx_tx, uart2_0_cts_rts, + uart2_1, uart0, uart1, uart2] + maxItems: 2 + - if: + properties: + function: + const: watchdog + then: + properties: + groups: + enum: [watchdog] + - if: + properties: + function: + const: wifi + then: + properties: + groups: + items: + enum: [wf_2g, wf_5g, wf_dbdc] + maxItems: 3 + '^.*conf.*$': + type: object + additionalProperties: false + description: + pinconf configuration nodes. + $ref: /schemas/pinctrl/pincfg-node.yaml + + properties: + pins: + description: + An array of strings. Each string contains the name of a pin. There + is no PIN 41 to PIN 65 above on mt7686b, you can only use those + pins on mt7986a. + items: + enum: [SYS_WATCHDOG, WF2G_LED, WF5G_LED, I2C_SCL, I2C_SDA, GPIO_0, + GPIO_1, GPIO_2, GPIO_3, GPIO_4, GPIO_5, GPIO_6, GPIO_7, + GPIO_8, GPIO_9, GPIO_10, GPIO_11, GPIO_12, GPIO_13, + GPIO_14, GPIO_15, PWM0, PWM1, SPI0_CLK, SPI0_MOSI, + SPI0_MISO, SPI0_CS, SPI0_HOLD, SPI0_WP, SPI1_CLK, + SPI1_MOSI, SPI1_MISO, SPI1_CS, SPI2_CLK, SPI2_MOSI, + SPI2_MISO, SPI2_CS, SPI2_HOLD, SPI2_WP, UART0_RXD, + UART0_TXD, PCIE_PERESET_N, UART1_RXD, UART1_TXD, UART1_CTS, + UART1_RTS, UART2_RXD, UART2_TXD, UART2_CTS, UART2_RTS, + EMMC_DATA_0, EMMC_DATA_1, EMMC_DATA_2, EMMC_DATA_3, + EMMC_DATA_4, EMMC_DATA_5, EMMC_DATA_6, EMMC_DATA_7, + EMMC_CMD, EMMC_CK, EMMC_DSL, EMMC_RSTB, PCM_DTX, PCM_DRX, + PCM_CLK, PCM_FS, MT7531_INT, SMI_MDC, SMI_MDIO, + WF0_DIG_RESETB, WF0_CBA_RESETB, WF0_XO_REQ, WF0_TOP_CLK, + WF0_TOP_DATA, WF0_HB1, WF0_HB2, WF0_HB3, WF0_HB4, WF0_HB0, + WF0_HB0_B, WF0_HB5, WF0_HB6, WF0_HB7, WF0_HB8, WF0_HB9, + WF0_HB10, WF1_DIG_RESETB, WF1_CBA_RESETB, WF1_XO_REQ, + WF1_TOP_CLK, WF1_TOP_DATA, WF1_HB1, WF1_HB2, WF1_HB3, + WF1_HB4, WF1_HB0, WF1_HB0_B, WF1_HB5, WF1_HB6, WF1_HB7, + WF1_HB8] + maxItems: 101 + + bias-disable: true + + bias-pull-up: + oneOf: + - type: boolean + description: normal pull up. + - enum: [100, 101, 102, 103] + description: + PUPD/R1/R0 pull down type. See MTK_PUPD_SET_R1R0 defines in + dt-bindings/pinctrl/mt65xx.h. + + bias-pull-down: + oneOf: + - type: boolean + description: normal pull down. + - enum: [100, 101, 102, 103] + description: + PUPD/R1/R0 pull down type. See MTK_PUPD_SET_R1R0 defines in + dt-bindings/pinctrl/mt65xx.h. + + input-enable: true + + input-disable: true + + output-enable: true + + output-low: true + + output-high: true + + input-schmitt-enable: true + + input-schmitt-disable: true + + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + + mediatek,pull-up-adv: + description: | + Valid arguments for 'mediatek,pull-up-adv' are '0', '1', '2', '3' + Pull up settings for 2 pull resistors, R0 and R1. Valid arguments + are described as below: + 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. + 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. + 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. + 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + + mediatek,pull-down-adv: + description: | + Valid arguments for 'mediatek,pull-up-adv' are '0', '1', '2', '3' + Pull down settings for 2 pull resistors, R0 and R1. Valid arguments + are described as below: + 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. + 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. + 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. + 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + + required: + - pins + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/pinctrl/mt65xx.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + pio: pinctrl@1001f000 { + compatible = "mediatek,mt7986a-pinctrl"; + reg = <0 0x1001f000 0 0x1000>, + <0 0x11c30000 0 0x1000>, + <0 0x11c40000 0 0x1000>, + <0 0x11e20000 0 0x1000>, + <0 0x11e30000 0 0x1000>, + <0 0x11f00000 0 0x1000>, + <0 0x11f10000 0 0x1000>, + <0 0x1000b000 0 0x1000>; + reg-names = "gpio", "iocfg_rt", "iocfg_rb", "iocfg_lt", + "iocfg_lb", "iocfg_tr", "iocfg_tl", "eint"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pio 0 0 100>; + interrupt-controller; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + #interrupt-cells = <2>; + + pcie_pins: pcie-pins { + mux { + function = "pcie"; + groups = "pcie_clk", "pcie_wake", "pcie_pereset"; + }; + }; + + pwm_pins: pwm-pins { + mux { + function = "pwm"; + groups = "pwm0", "pwm1_0"; + }; + }; + + spi0_pins: spi0-pins { + mux { + function = "spi"; + groups = "spi0", "spi0_wp_hold"; + }; + }; + + uart1_pins: uart1-pins { + mux { + function = "uart"; + groups = "uart1"; + }; + }; + + uart1_3_pins: uart1-3-pins { + mux { + function = "uart"; + groups = "uart1_3_rx_tx", "uart1_3_cts_rts"; + }; + }; + + uart2_pins: uart2-pins { + mux { + function = "uart"; + groups = "uart2"; + }; + }; + + mmc0_pins_default: mmc0-pins { + mux { + function = "emmc"; + groups = "emmc_51"; + }; + conf-cmd-dat { + pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2", + "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5", + "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD"; + input-enable; + drive-strength = <4>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */ + }; + conf-clk { + pins = "EMMC_CK"; + drive-strength = <6>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */ + }; + conf-ds { + pins = "EMMC_DSL"; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */ + }; + conf-rst { + pins = "EMMC_RSTB"; + drive-strength = <4>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */ + }; + }; + + }; + }; diff --git a/dts/Bindings/pinctrl/mediatek,mt8183-pinctrl.yaml b/dts/Bindings/pinctrl/mediatek,mt8183-pinctrl.yaml index cc1509e9b9..8507bd15f2 100644 --- a/dts/Bindings/pinctrl/mediatek,mt8183-pinctrl.yaml +++ b/dts/Bindings/pinctrl/mediatek,mt8183-pinctrl.yaml @@ -4,12 +4,12 @@ $id: http://devicetree.org/schemas/pinctrl/mediatek,mt8183-pinctrl.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Mediatek MT8183 Pin Controller Device Tree Bindings +title: MediaTek MT8183 Pin Controller maintainers: - Sean Wang <sean.wang@kernel.org> -description: |+ +description: The MediaTek's MT8183 Pin controller is used to control SoC pins. properties: @@ -37,15 +37,15 @@ properties: "#gpio-cells": const: 2 - description: | - Number of cells in GPIO specifier. Since the generic GPIO - binding is used, the amount of cells must be specified as 2. See the below - mentioned gpio binding representation for description of particular cells. + description: + Number of cells in GPIO specifier. Since the generic GPIO binding is used, + the amount of cells must be specified as 2. See the below mentioned gpio + binding representation for description of particular cells. gpio-ranges: minItems: 1 maxItems: 5 - description: | + description: GPIO valid number range. interrupt-controller: true @@ -56,6 +56,9 @@ properties: "#interrupt-cells": const: 2 +allOf: + - $ref: pinctrl.yaml# + required: - compatible - reg @@ -64,25 +67,25 @@ required: - gpio-ranges patternProperties: - '-[0-9]+$': + '-pins(-[a-z]+)?$': type: object additionalProperties: false patternProperties: - 'pins': + '^pins': type: object additionalProperties: false - description: | + description: A pinctrl node should contain at least one subnodes representing the pinctrl groups available on the machine. Each subnode will list the pins it needs, and how they should be configured, with regard to muxer configuration, pullups, drive strength, input enable/disable and input schmitt. - $ref: "/schemas/pinctrl/pincfg-node.yaml" + $ref: /schemas/pinctrl/pincfg-node.yaml properties: pinmux: description: - integer array, represents gpio pin number and mux setting. + Integer array, represents gpio pin number and mux setting. Supported pin number and mux varies for different SoCs, and are defined as macros in <soc>-pinfunc.h directly. @@ -107,8 +110,13 @@ patternProperties: drive-strength: enum: [2, 4, 6, 8, 10, 12, 14, 16] + drive-strength-microamp: + enum: [125, 250, 500, 1000] + mediatek,drive-strength-adv: + deprecated: true description: | + DEPRECATED: Please use drive-strength-microamp instead. Describe the specific driving setup property. For I2C pins, the existing generic driving setup can only support 2/4/6/8/10/12/14/16mA driving. But in specific driving setup, they @@ -135,8 +143,9 @@ patternProperties: mediatek,pull-up-adv: description: | - Pull up setings for 2 pull resistors, R0 and R1. User can - configure those special pins. Valid arguments are described as below: + Pull up settings for 2 pull resistors, R0 and R1. User can + configure those special pins. Valid arguments are described as + below: 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. @@ -147,7 +156,8 @@ patternProperties: mediatek,pull-down-adv: description: | Pull down settings for 2 pull resistors, R0 and R1. User can - configure those special pins. Valid arguments are described as below: + configure those special pins. Valid arguments are described as + below: 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. @@ -156,14 +166,14 @@ patternProperties: enum: [0, 1, 2, 3] mediatek,tdsel: - description: | + description: An integer describing the steps for output level shifter duty cycle when asserted (high pulse width adjustment). Valid arguments are from 0 to 15. $ref: /schemas/types.yaml#/definitions/uint32 mediatek,rdsel: - description: | + description: An integer describing the steps for input level shifter duty cycle when asserted (high pulse width adjustment). Valid arguments are from 0 to 63. @@ -207,21 +217,20 @@ examples: interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; - i2c0_pins_a: i2c-0 { + i2c0_pins_a: i2c0-pins { pins1 { pinmux = <PINMUX_GPIO48__FUNC_SCL5>, <PINMUX_GPIO49__FUNC_SDA5>; mediatek,pull-up-adv = <3>; - mediatek,drive-strength-adv = <7>; + drive-strength-microamp = <1000>; }; }; - i2c1_pins_a: i2c-1 { + i2c1_pins_a: i2c1-pins { pins { pinmux = <PINMUX_GPIO50__FUNC_SCL3>, <PINMUX_GPIO51__FUNC_SDA3>; mediatek,pull-down-adv = <2>; - mediatek,drive-strength-adv = <4>; }; }; }; diff --git a/dts/Bindings/pinctrl/mediatek,mt8186-pinctrl.yaml b/dts/Bindings/pinctrl/mediatek,mt8186-pinctrl.yaml new file mode 100644 index 0000000000..69136ddd0b --- /dev/null +++ b/dts/Bindings/pinctrl/mediatek,mt8186-pinctrl.yaml @@ -0,0 +1,275 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/mediatek,mt8186-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT8186 Pin Controller + +maintainers: + - Sean Wang <sean.wang@mediatek.com> + +description: + The MediaTek's MT8186 Pin controller is used to control SoC pins. + +properties: + compatible: + const: mediatek,mt8186-pinctrl + + gpio-controller: true + + '#gpio-cells': + description: + Number of cells in GPIO specifier. Since the generic GPIO binding is used, + the amount of cells must be specified as 2. See the below mentioned gpio + binding representation for description of particular cells. + const: 2 + + gpio-ranges: + maxItems: 1 + + gpio-line-names: true + + reg: + description: + Physical address base for GPIO base registers. There are 8 different GPIO + physical address base in mt8186. + maxItems: 8 + + reg-names: + description: + GPIO base register names. + items: + - const: iocfg0 + - const: iocfg_lt + - const: iocfg_lm + - const: iocfg_lb + - const: iocfg_bl + - const: iocfg_rb + - const: iocfg_rt + - const: eint + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + + interrupts: + description: The interrupt outputs to sysirq + maxItems: 1 + + mediatek,rsel-resistance-in-si-unit: + type: boolean + description: + Identifying i2c pins pull up/down type which is RSEL. It can support RSEL + define or si unit value(ohm) to set different resistance. + +# PIN CONFIGURATION NODES +patternProperties: + '-pins$': + type: object + additionalProperties: false + patternProperties: + '^pins': + type: object + additionalProperties: false + description: | + A pinctrl node should contain at least one subnodes representing the + pinctrl groups available on the machine. Each subnode will list the + pins it needs, and how they should be configured, with regard to muxer + configuration, pullups, drive strength, input enable/disable and input + schmitt. + An example of using macro: + pincontroller { + /* GPIO0 set as multifunction GPIO0 */ + gpio-pins { + pins { + pinmux = <PINMUX_GPIO0__FUNC_GPIO0>; + } + }; + /* GPIO128 set as multifunction SDA0 */ + i2c0-pins { + pins { + pinmux = <PINMUX_GPIO128__FUNC_SDA0>; + } + }; + }; + $ref: pinmux-node.yaml + + properties: + pinmux: + description: + Integer array, represents gpio pin number and mux setting. + Supported pin number and mux varies for different SoCs, and are + defined as macros in dt-bindings/pinctrl/<soc>-pinfunc.h directly. + + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + + drive-strength-microamp: + enum: [125, 250, 500, 1000] + + bias-pull-down: + oneOf: + - type: boolean + - enum: [100, 101, 102, 103] + description: mt8186 pull down PUPD/R0/R1 type define value. + - enum: [200, 201, 202, 203] + description: mt8186 pull down RSEL type define value. + - enum: [75000, 5000] + description: mt8186 pull down RSEL type si unit value(ohm). + description: | + For pull down type is normal, it don't need add RSEL & R1R0 define + and resistance value. + For pull down type is PUPD/R0/R1 type, it can add R1R0 define to + set different resistance. It can support "MTK_PUPD_SET_R1R0_00" & + "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & + "MTK_PUPD_SET_R1R0_11" define in mt8186. + For pull down type is RSEL, it can add RSEL define & resistance + value(ohm) to set different resistance by identifying property + "mediatek,rsel-resistance-in-si-unit". + It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001" & + "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" define in + mt8186. It can also support resistance value(ohm) "75000" & "5000" + in mt8186. + An example of using RSEL define: + pincontroller { + i2c0_pin { + pins { + pinmux = <PINMUX_GPIO128__FUNC_SDA0>; + bias-pull-down = <MTK_PULL_SET_RSEL_001>; + } + }; + }; + An example of using si unit resistance value(ohm): + &pio { + mediatek,rsel-resistance-in-si-unit; + } + pincontroller { + i2c0_pin { + pins { + pinmux = <PINMUX_GPIO128__FUNC_SDA0>; + bias-pull-down = <75000>; + } + }; + }; + + bias-pull-up: + oneOf: + - type: boolean + - enum: [100, 101, 102, 103] + description: mt8186 pull up PUPD/R0/R1 type define value. + - enum: [200, 201, 202, 203] + description: mt8186 pull up RSEL type define value. + - enum: [1000, 5000, 10000, 75000] + description: mt8186 pull up RSEL type si unit value(ohm). + description: | + For pull up type is normal, it don't need add RSEL & R1R0 define + and resistance value. + For pull up type is PUPD/R0/R1 type, it can add R1R0 define to + set different resistance. It can support "MTK_PUPD_SET_R1R0_00" & + "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & + "MTK_PUPD_SET_R1R0_11" define in mt8186. + For pull up type is RSEL, it can add RSEL define & resistance + value(ohm) to set different resistance by identifying property + "mediatek,rsel-resistance-in-si-unit". + It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001" & + "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" define in + mt8186. It can also support resistance value(ohm) "1000" & "5000" + & "10000" & "75000" in mt8186. + An example of using si unit resistance value(ohm): + &pio { + mediatek,rsel-resistance-in-si-unit; + } + pincontroller { + i2c0-pins { + pins { + pinmux = <PINMUX_GPIO128__FUNC_SDA0>; + bias-pull-up = <1000>; + } + }; + }; + + bias-disable: true + + output-high: true + + output-low: true + + input-enable: true + + input-disable: true + + input-schmitt-enable: true + + input-schmitt-disable: true + + required: + - pinmux + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - '#interrupt-cells' + - gpio-controller + - '#gpio-cells' + - gpio-ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/pinctrl/mt8186-pinfunc.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + pio: pinctrl@10005000 { + compatible = "mediatek,mt8186-pinctrl"; + reg = <0x10005000 0x1000>, + <0x10002000 0x0200>, + <0x10002200 0x0200>, + <0x10002400 0x0200>, + <0x10002600 0x0200>, + <0x10002A00 0x0200>, + <0x10002c00 0x0200>, + <0x1000b000 0x1000>; + reg-names = "iocfg0", "iocfg_lt", "iocfg_lm", + "iocfg_lb", "iocfg_bl", "iocfg_rb", + "iocfg_rt", "eint"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pio 0 0 185>; + interrupt-controller; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH 0>; + #interrupt-cells = <2>; + + pio-pins { + pins { + pinmux = <PINMUX_GPIO0__FUNC_GPIO0>; + output-low; + }; + }; + + spi0-pins { + pins-spi { + pinmux = <PINMUX_GPIO0__FUNC_SPI0_CLK_B>, + <PINMUX_GPIO1__FUNC_SPI0_CSB_B>, + <PINMUX_GPIO2__FUNC_SPI0_MO_B>; + bias-disable; + }; + pins-spi-mi { + pinmux = <PINMUX_GPIO3__FUNC_SPI0_MI_B>; + bias-pull-down; + }; + }; + + i2c0-pins { + pins { + pinmux = <PINMUX_GPIO127__FUNC_SCL0>, + <PINMUX_GPIO128__FUNC_SDA0>; + bias-pull-up = <MTK_PULL_SET_RSEL_001>; + drive-strength-microamp = <1000>; + }; + }; + }; diff --git a/dts/Bindings/pinctrl/mediatek,mt8188-pinctrl.yaml b/dts/Bindings/pinctrl/mediatek,mt8188-pinctrl.yaml new file mode 100644 index 0000000000..e994b0c70d --- /dev/null +++ b/dts/Bindings/pinctrl/mediatek,mt8188-pinctrl.yaml @@ -0,0 +1,232 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/mediatek,mt8188-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT8188 Pin Controller + +maintainers: + - Hui Liu <hui.liu@mediatek.com> + +description: + The MediaTek's MT8188 Pin controller is used to control SoC pins. + +properties: + compatible: + const: mediatek,mt8188-pinctrl + + gpio-controller: true + + '#gpio-cells': + description: + Number of cells in GPIO specifier, should be two. The first cell is the + pin number, the second cell is used to specify optional parameters which + are defined in <dt-bindings/gpio/gpio.h>. + const: 2 + + gpio-ranges: + maxItems: 1 + + gpio-line-names: true + + reg: + items: + - description: gpio registers base address + - description: rm group io configuration registers base address + - description: lt group io configuration registers base address + - description: lm group io configuration registers base address + - description: rt group io configuration registers base address + - description: eint registers base address + + reg-names: + items: + - const: iocfg0 + - const: iocfg_rm + - const: iocfg_lt + - const: iocfg_lm + - const: iocfg_rt + - const: eint + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + + interrupts: + description: The interrupt outputs to sysirq. + maxItems: 1 + + mediatek,rsel-resistance-in-si-unit: + type: boolean + description: + We provide two methods to select the resistance for I2C when pull up or + pull down. The first is by RSEL definition value, another one is by + resistance value(ohm). This flag is used to identify if the method is + resistance(si unit) value. + +# PIN CONFIGURATION NODES +patternProperties: + '-pins$': + type: object + additionalProperties: false + + patternProperties: + '^pins': + type: object + $ref: /schemas/pinctrl/pincfg-node.yaml + additionalProperties: false + description: + A pinctrl node should contain at least one subnode representing the + pinctrl groups available on the machine. Each subnode will list the + pins it needs, and how they should be configured, with regard to muxer + configuration, pullups, drive strength, input enable/disable and input + schmitt. + + properties: + pinmux: + description: + Integer array, represents gpio pin number and mux setting. + Supported pin number and mux varies for different SoCs, and are + defined as macros in dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h + directly, for this SoC. + + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + + drive-strength-microamp: + enum: [125, 250, 500, 1000] + + bias-pull-down: + oneOf: + - type: boolean + - enum: [100, 101, 102, 103] + description: mt8188 pull down PUPD/R0/R1 type define value. + - enum: [200, 201, 202, 203, 204, 205, 206, 207] + description: mt8188 pull down RSEL type define value. + - enum: [75000, 5000] + description: mt8188 pull down RSEL type si unit value(ohm). + description: | + For pull down type is normal, it doesn't need add RSEL & R1R0 + define and resistance value. + For pull down type is PUPD/R0/R1 type, it can add R1R0 define to + set different resistance. It can support "MTK_PUPD_SET_R1R0_00" & + "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & + "MTK_PUPD_SET_R1R0_11" define in mt8188. + For pull down type is RSEL, it can add RSEL define & resistance + value(ohm) to set different resistance by identifying property + "mediatek,rsel-resistance-in-si-unit". It can support + "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001" & + "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" & + "MTK_PULL_SET_RSEL_100" & "MTK_PULL_SET_RSEL_101" & + "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111" define in + mt8188. It can also support resistance value(ohm) "75000" & "5000" + in mt8188. + + bias-pull-up: + oneOf: + - type: boolean + - enum: [100, 101, 102, 103] + description: mt8188 pull up PUPD/R0/R1 type define value. + - enum: [200, 201, 202, 203, 204, 205, 206, 207] + description: mt8188 pull up RSEL type define value. + - enum: [1000, 1500, 2000, 3000, 4000, 5000, 10000, 75000] + description: mt8188 pull up RSEL type si unit value(ohm). + description: | + For pull up type is normal, it don't need add RSEL & R1R0 define + and resistance value. + For pull up type is PUPD/R0/R1 type, it can add R1R0 define to set + different resistance. It can support "MTK_PUPD_SET_R1R0_00" & + "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & + "MTK_PUPD_SET_R1R0_11" define in mt8188. + For pull up type is RSEL, it can add RSEL define & resistance + value(ohm) to set different resistance by identifying property + "mediatek,rsel-resistance-in-si-unit". It can support + "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001" & + "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" & + "MTK_PULL_SET_RSEL_100" & "MTK_PULL_SET_RSEL_101" & + "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111" define in + mt8188. It can also support resistance value(ohm) "1000" & "1500" + & "2000" & "3000" & "4000" & "5000" & "10000" & "75000" in mt8188. + + bias-disable: true + + output-high: true + + output-low: true + + input-enable: true + + input-disable: true + + input-schmitt-enable: true + + input-schmitt-disable: true + + required: + - pinmux + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - '#interrupt-cells' + - gpio-controller + - '#gpio-cells' + - gpio-ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + pio: pinctrl@10005000 { + compatible = "mediatek,mt8188-pinctrl"; + reg = <0x10005000 0x1000>, + <0x11c00000 0x1000>, + <0x11e10000 0x1000>, + <0x11e20000 0x1000>, + <0x11ea0000 0x1000>, + <0x1000b000 0x1000>; + reg-names = "iocfg0", "iocfg_rm", + "iocfg_lt", "iocfg_lm", "iocfg_rt", + "eint"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pio 0 0 176>; + interrupt-controller; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH 0>; + #interrupt-cells = <2>; + + pio-pins { + pins { + pinmux = <PINMUX_GPIO0__FUNC_B_GPIO0>; + output-low; + }; + }; + + spi0-pins { + pins-spi { + pinmux = <PINMUX_GPIO75__FUNC_O_SPIM1_CSB>, + <PINMUX_GPIO76__FUNC_O_SPIM1_CLK>, + <PINMUX_GPIO77__FUNC_B0_SPIM1_MOSI>; + drive-strength = <6>; + }; + pins-spi-mi { + pinmux = <PINMUX_GPIO78__FUNC_B0_SPIM1_MISO>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + }; + + i2c0-pins { + pins { + pinmux = <PINMUX_GPIO55__FUNC_B1_SCL0>, + <PINMUX_GPIO56__FUNC_B1_SDA0>; + bias-disable; + drive-strength-microamp = <1000>; + }; + }; + }; diff --git a/dts/Bindings/pinctrl/mediatek,mt8192-pinctrl.yaml b/dts/Bindings/pinctrl/mediatek,mt8192-pinctrl.yaml new file mode 100644 index 0000000000..1686427eb8 --- /dev/null +++ b/dts/Bindings/pinctrl/mediatek,mt8192-pinctrl.yaml @@ -0,0 +1,184 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/mediatek,mt8192-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT8192 Pin Controller + +maintainers: + - Sean Wang <sean.wang@mediatek.com> + +description: + The MediaTek's MT8192 Pin controller is used to control SoC pins. + +properties: + compatible: + const: mediatek,mt8192-pinctrl + + gpio-controller: true + + '#gpio-cells': + description: + Number of cells in GPIO specifier. Since the generic GPIO binding is used, + the amount of cells must be specified as 2. See the below mentioned gpio + binding representation for description of particular cells. + const: 2 + + gpio-ranges: + description: GPIO valid number range. + maxItems: 1 + + gpio-line-names: true + + reg: + description: + Physical address base for GPIO base registers. There are 11 GPIO physical + address base in mt8192. + maxItems: 11 + + reg-names: + description: + GPIO base register names. + maxItems: 11 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + + interrupts: + description: The interrupt outputs to sysirq. + maxItems: 1 + +# PIN CONFIGURATION NODES +patternProperties: + '-pins$': + type: object + additionalProperties: false + patternProperties: + '^pins': + type: object + description: + A pinctrl node should contain at least one subnodes representing the + pinctrl groups available on the machine. Each subnode will list the + pins it needs, and how they should be configured, with regard to muxer + configuration, pullups, drive strength, input enable/disable and input + schmitt. + $ref: pinmux-node.yaml + + properties: + pinmux: + description: + Integer array, represents gpio pin number and mux setting. + Supported pin number and mux varies for different SoCs, and are + defined as macros in dt-bindings/pinctrl/<soc>-pinfunc.h directly. + + drive-strength: + description: + It can support some arguments, such as MTK_DRIVE_4mA, + MTK_DRIVE_6mA, etc. See dt-bindings/pinctrl/mt65xx.h. It can only + support 2/4/6/8/10/12/14/16mA in mt8192. + enum: [2, 4, 6, 8, 10, 12, 14, 16] + + drive-strength-microamp: + enum: [125, 250, 500, 1000] + + bias-pull-down: + oneOf: + - type: boolean + description: normal pull down. + - enum: [100, 101, 102, 103] + description: PUPD/R1/R0 pull down type. See MTK_PUPD_SET_R1R0_ + defines in dt-bindings/pinctrl/mt65xx.h. + - enum: [200, 201, 202, 203] + description: RSEL pull down type. See MTK_PULL_SET_RSEL_ defines + in dt-bindings/pinctrl/mt65xx.h. + + bias-pull-up: + oneOf: + - type: boolean + description: normal pull up. + - enum: [100, 101, 102, 103] + description: PUPD/R1/R0 pull up type. See MTK_PUPD_SET_R1R0_ + defines in dt-bindings/pinctrl/mt65xx.h. + - enum: [200, 201, 202, 203] + description: RSEL pull up type. See MTK_PULL_SET_RSEL_ defines + in dt-bindings/pinctrl/mt65xx.h. + + bias-disable: true + + output-high: true + + output-low: true + + input-enable: true + + input-disable: true + + input-schmitt-enable: true + + input-schmitt-disable: true + + required: + - pinmux + + additionalProperties: false + +allOf: + - $ref: pinctrl.yaml# + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - '#interrupt-cells' + - gpio-controller + - '#gpio-cells' + - gpio-ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/pinctrl/mt8192-pinfunc.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + pio: pinctrl@10005000 { + compatible = "mediatek,mt8192-pinctrl"; + reg = <0x10005000 0x1000>, + <0x11c20000 0x1000>, + <0x11d10000 0x1000>, + <0x11d30000 0x1000>, + <0x11d40000 0x1000>, + <0x11e20000 0x1000>, + <0x11e70000 0x1000>, + <0x11ea0000 0x1000>, + <0x11f20000 0x1000>, + <0x11f30000 0x1000>, + <0x1000b000 0x1000>; + reg-names = "iocfg0", "iocfg_rm", "iocfg_bm", + "iocfg_bl", "iocfg_br", "iocfg_lm", + "iocfg_lb", "iocfg_rt", "iocfg_lt", + "iocfg_tl", "eint"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pio 0 0 220>; + interrupt-controller; + interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH 0>; + #interrupt-cells = <2>; + + spi1-default-pins { + pins-cs-mosi-clk { + pinmux = <PINMUX_GPIO157__FUNC_SPI1_A_CSB>, + <PINMUX_GPIO159__FUNC_SPI1_A_MO>, + <PINMUX_GPIO156__FUNC_SPI1_A_CLK>; + bias-disable; + }; + + pins-miso { + pinmux = <PINMUX_GPIO158__FUNC_SPI1_A_MI>; + bias-pull-down; + }; + }; + }; diff --git a/dts/Bindings/pinctrl/mediatek,mt8195-pinctrl.yaml b/dts/Bindings/pinctrl/mediatek,mt8195-pinctrl.yaml new file mode 100644 index 0000000000..33cb71775d --- /dev/null +++ b/dts/Bindings/pinctrl/mediatek,mt8195-pinctrl.yaml @@ -0,0 +1,286 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/mediatek,mt8195-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT8195 Pin Controller + +maintainers: + - Sean Wang <sean.wang@mediatek.com> + +description: + The MediaTek's MT8195 Pin controller is used to control SoC pins. + +properties: + compatible: + const: mediatek,mt8195-pinctrl + + gpio-controller: true + + '#gpio-cells': + description: + Number of cells in GPIO specifier. Since the generic GPIO binding is used, + the amount of cells must be specified as 2. See the below mentioned gpio + binding representation for description of particular cells. + const: 2 + + gpio-ranges: + description: GPIO valid number range. + maxItems: 1 + + gpio-line-names: true + + reg: + description: + Physical address base for GPIO base registers. There are 8 GPIO physical + address base in mt8195. + maxItems: 8 + + reg-names: + description: + GPIO base register names. + maxItems: 8 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + + interrupts: + description: The interrupt outputs to sysirq. + maxItems: 1 + + mediatek,rsel-resistance-in-si-unit: + type: boolean + description: + Identifying i2c pins pull up/down type which is RSEL. It can support RSEL + define or si unit value(ohm) to set different resistance. + +# PIN CONFIGURATION NODES +patternProperties: + '-pins$': + type: object + additionalProperties: false + patternProperties: + '^pins': + type: object + additionalProperties: false + description: | + A pinctrl node should contain at least one subnodes representing the + pinctrl groups available on the machine. Each subnode will list the + pins it needs, and how they should be configured, with regard to muxer + configuration, pullups, drive strength, input enable/disable and input + schmitt. + An example of using macro: + pincontroller { + /* GPIO0 set as multifunction GPIO0 */ + gpio-pins { + pins { + pinmux = <PINMUX_GPIO0__FUNC_GPIO0>; + } + }; + /* GPIO8 set as multifunction SDA0 */ + i2c0-pins { + pins { + pinmux = <PINMUX_GPIO8__FUNC_SDA0>; + } + }; + }; + $ref: pinmux-node.yaml + + properties: + pinmux: + description: + Integer array, represents gpio pin number and mux setting. + Supported pin number and mux varies for different SoCs, and are + defined as macros in dt-bindings/pinctrl/<soc>-pinfunc.h directly. + + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + + drive-strength-microamp: + enum: [125, 250, 500, 1000] + + bias-pull-down: + oneOf: + - type: boolean + - enum: [100, 101, 102, 103] + description: mt8195 pull down PUPD/R0/R1 type define value. + - enum: [200, 201, 202, 203, 204, 205, 206, 207] + description: mt8195 pull down RSEL type define value. + - enum: [75000, 5000] + description: mt8195 pull down RSEL type si unit value(ohm). + description: | + For pull down type is normal, it don't need add RSEL & R1R0 define + and resistance value. + For pull down type is PUPD/R0/R1 type, it can add R1R0 define to + set different resistance. It can support "MTK_PUPD_SET_R1R0_00" & + "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & + "MTK_PUPD_SET_R1R0_11" define in mt8195. + For pull down type is RSEL, it can add RSEL define & resistance + value(ohm) to set different resistance by identifying property + "mediatek,rsel-resistance-in-si-unit". + It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001" + & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" + & "MTK_PULL_SET_RSEL_100" & "MTK_PULL_SET_RSEL_101" + & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111" + define in mt8195. It can also support resistance value(ohm) + "75000" & "5000" in mt8195. + + An example of using RSEL define: + pincontroller { + i2c0_pin { + pins { + pinmux = <PINMUX_GPIO8__FUNC_SDA0>; + bias-pull-down = <MTK_PULL_SET_RSEL_001>; + } + }; + }; + An example of using si unit resistance value(ohm): + &pio { + mediatek,rsel-resistance-in-si-unit; + } + pincontroller { + i2c0_pin { + pins { + pinmux = <PINMUX_GPIO8__FUNC_SDA0>; + bias-pull-down = <75000>; + } + }; + }; + + bias-pull-up: + oneOf: + - type: boolean + - enum: [100, 101, 102, 103] + description: mt8195 pull up PUPD/R0/R1 type define value. + - enum: [200, 201, 202, 203, 204, 205, 206, 207] + description: mt8195 pull up RSEL type define value. + - enum: [1000, 1500, 2000, 3000, 4000, 5000, 10000, 75000] + description: mt8195 pull up RSEL type si unit value(ohm). + description: | + For pull up type is normal, it don't need add RSEL & R1R0 define + and resistance value. + For pull up type is PUPD/R0/R1 type, it can add R1R0 define to + set different resistance. It can support "MTK_PUPD_SET_R1R0_00" & + "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & + "MTK_PUPD_SET_R1R0_11" define in mt8195. + For pull up type is RSEL, it can add RSEL define & resistance + value(ohm) to set different resistance by identifying property + "mediatek,rsel-resistance-in-si-unit". + It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001" + & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" + & "MTK_PULL_SET_RSEL_100" & "MTK_PULL_SET_RSEL_101" + & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111" + define in mt8195. It can also support resistance value(ohm) "1000" + & "1500" & "2000" & "3000" & "4000" & "5000" & "10000" & "75000" + in mt8195. + An example of using RSEL define: + pincontroller { + i2c0-pins { + pins { + pinmux = <PINMUX_GPIO8__FUNC_SDA0>; + bias-pull-up = <MTK_PULL_SET_RSEL_001>; + } + }; + }; + An example of using si unit resistance value(ohm): + &pio { + mediatek,rsel-resistance-in-si-unit; + } + pincontroller { + i2c0-pins { + pins { + pinmux = <PINMUX_GPIO8__FUNC_SDA0>; + bias-pull-up = <1000>; + } + }; + }; + + bias-disable: true + + output-high: true + + output-low: true + + input-enable: true + + input-disable: true + + input-schmitt-enable: true + + input-schmitt-disable: true + + required: + - pinmux + +allOf: + - $ref: pinctrl.yaml# + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - '#interrupt-cells' + - gpio-controller + - '#gpio-cells' + - gpio-ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/pinctrl/mt8195-pinfunc.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + # + pio: pinctrl@10005000 { + compatible = "mediatek,mt8195-pinctrl"; + reg = <0x10005000 0x1000>, + <0x11d10000 0x1000>, + <0x11d30000 0x1000>, + <0x11d40000 0x1000>, + <0x11e20000 0x1000>, + <0x11eb0000 0x1000>, + <0x11f40000 0x1000>, + <0x1000b000 0x1000>; + reg-names = "iocfg0", "iocfg_bm", "iocfg_bl", + "iocfg_br", "iocfg_lm", "iocfg_rb", + "iocfg_tl", "eint"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pio 0 0 144>; + interrupt-controller; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH 0>; + #interrupt-cells = <2>; + + pio-pins { + pins { + pinmux = <PINMUX_GPIO0__FUNC_GPIO0>; + output-low; + }; + }; + + spi0-pins { + pins-spi { + pinmux = <PINMUX_GPIO132__FUNC_SPIM0_CSB>, + <PINMUX_GPIO134__FUNC_SPIM0_MO>, + <PINMUX_GPIO133__FUNC_SPIM0_CLK>; + bias-disable; + }; + pins-spi-mi { + pinmux = <PINMUX_GPIO135__FUNC_SPIM0_MI>; + bias-pull-down; + }; + }; + + i2c0-pins { + pins { + pinmux = <PINMUX_GPIO8__FUNC_SDA0>, + <PINMUX_GPIO9__FUNC_SCL0>; + bias-disable; + drive-strength-microamp = <1000>; + }; + }; + }; diff --git a/dts/Bindings/pinctrl/mediatek,mt8365-pinctrl.yaml b/dts/Bindings/pinctrl/mediatek,mt8365-pinctrl.yaml new file mode 100644 index 0000000000..7b43e78572 --- /dev/null +++ b/dts/Bindings/pinctrl/mediatek,mt8365-pinctrl.yaml @@ -0,0 +1,230 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/mediatek,mt8365-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT8365 Pin Controller + +maintainers: + - Zhiyong Tao <zhiyong.tao@mediatek.com> + - Bernhard Rosenkränzer <bero@baylibre.com> + +description: + The MediaTek's MT8365 Pin controller is used to control SoC pins. + +properties: + compatible: + const: mediatek,mt8365-pinctrl + + reg: + maxItems: 1 + + mediatek,pctl-regmap: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 + minItems: 1 + maxItems: 2 + description: + Should be phandles of the syscfg node. + + gpio-controller: true + + "#gpio-cells": + const: 2 + description: + Number of cells in GPIO specifier. Since the generic GPIO binding is used, + the amount of cells must be specified as 2. See the below mentioned gpio + binding representation for description of particular cells. + + interrupt-controller: true + + interrupts: + maxItems: 1 + + "#interrupt-cells": + const: 2 + +patternProperties: + "-pins$": + type: object + additionalProperties: false + patternProperties: + "pins$": + type: object + additionalProperties: false + description: + A pinctrl node should contain at least one subnode representing the + pinctrl groups available on the machine. Each subnode will list the + pins it needs, and how they should be configured, with regard to muxer + configuration, pullups, drive strength, input enable/disable and input + schmitt. + $ref: /schemas/pinctrl/pincfg-node.yaml + + properties: + pinmux: + description: + Integer array, represents gpio pin number and mux setting. + Supported pin number and mux varies for different SoCs, and are + defined as macros in <soc>-pinfunc.h directly. + + bias-disable: true + + bias-pull-up: + oneOf: + - type: boolean + - enum: [100, 101, 102, 103] + description: Pull up R1/R0 type define value. + description: | + For pull up type is normal, it don't need add R1/R0 define. + For pull up type is R1/R0 type, it can add value to set different + resistance. Valid arguments are described as below: + 100: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. + 101: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. + 102: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. + 103: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled. + + bias-pull-down: + oneOf: + - type: boolean + - enum: [100, 101, 102, 103] + description: Pull down R1/R0 type define value. + description: | + For pull down type is normal, it don't need add R1/R0 define. + For pull down type is R1/R0 type, it can add value to set + different resistance. Valid arguments are described as below: + 100: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. + 101: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. + 102: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. + 103: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled. + + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + + input-enable: true + + input-disable: true + + output-low: true + + output-high: true + + input-schmitt-enable: true + + input-schmitt-disable: true + + drive-strength-microamp: + enum: [125, 250, 500, 1000] + + mediatek,drive-strength-adv: + deprecated: true + description: | + DEPRECATED: Please use drive-strength-microamp instead. + Describe the specific driving setup property. + For I2C pins, the existing generic driving setup can only support + 2/4/6/8/10/12/14/16mA driving. But in specific driving setup, they + can support 0.125/0.25/0.5/1mA adjustment. If we enable specific + driving setup, the existing generic setup will be disabled. + The specific driving setup is controlled by E1E0EN. + When E1=0/E0=0, the strength is 0.125mA. + When E1=0/E0=1, the strength is 0.25mA. + When E1=1/E0=0, the strength is 0.5mA. + When E1=1/E0=1, the strength is 1mA. + EN is used to enable or disable the specific driving setup. + Valid arguments are described as below: + 0: (E1, E0, EN) = (0, 0, 0) + 1: (E1, E0, EN) = (0, 0, 1) + 2: (E1, E0, EN) = (0, 1, 0) + 3: (E1, E0, EN) = (0, 1, 1) + 4: (E1, E0, EN) = (1, 0, 0) + 5: (E1, E0, EN) = (1, 0, 1) + 6: (E1, E0, EN) = (1, 1, 0) + 7: (E1, E0, EN) = (1, 1, 1) + So the valid arguments are from 0 to 7. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3, 4, 5, 6, 7] + + mediatek,pull-up-adv: + deprecated: true + description: | + DEPRECATED: Please use bias-pull-up instead. + Pull up settings for 2 pull resistors, R0 and R1. User can + configure those special pins. Valid arguments are described as + below: + 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. + 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. + 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. + 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + + mediatek,pull-down-adv: + deprecated: true + description: | + DEPRECATED: Please use bias-pull-down instead. + Pull down settings for 2 pull resistors, R0 and R1. User can + configure those special pins. Valid arguments are described as + below: + 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. + 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. + 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. + 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + + mediatek,tdsel: + description: + An integer describing the steps for output level shifter duty + cycle when asserted (high pulse width adjustment). Valid arguments + are from 0 to 15. + $ref: /schemas/types.yaml#/definitions/uint32 + + mediatek,rdsel: + description: + An integer describing the steps for input level shifter duty cycle + when asserted (high pulse width adjustment). Valid arguments are + from 0 to 63. + $ref: /schemas/types.yaml#/definitions/uint32 + + required: + - pinmux + +required: + - compatible + - reg + - gpio-controller + - "#gpio-cells" + +allOf: + - $ref: pinctrl.yaml# + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/pinctrl/mt8365-pinfunc.h> + soc { + #address-cells = <2>; + #size-cells = <2>; + + pio: pinctrl@1000b000 { + compatible = "mediatek,mt8365-pinctrl"; + reg = <0 0x1000b000 0 0x1000>; + mediatek,pctl-regmap = <&syscfg_pctl>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + + pio-pins { + pins { + pinmux = <MT8365_PIN_59_SDA1__FUNC_SDA1_0>, <MT8365_PIN_60_SCL1__FUNC_SCL1_0>; + mediatek,pull-up-adv = <3>; + bias-pull-up; + }; + }; + }; + }; diff --git a/dts/Bindings/pinctrl/meson,pinctrl.txt b/dts/Bindings/pinctrl/meson,pinctrl.txt deleted file mode 100644 index 0aff1f2849..0000000000 --- a/dts/Bindings/pinctrl/meson,pinctrl.txt +++ /dev/null @@ -1,93 +0,0 @@ -== Amlogic Meson pinmux controller == - -Required properties for the root node: - - compatible: one of "amlogic,meson8-cbus-pinctrl" - "amlogic,meson8b-cbus-pinctrl" - "amlogic,meson8m2-cbus-pinctrl" - "amlogic,meson8-aobus-pinctrl" - "amlogic,meson8b-aobus-pinctrl" - "amlogic,meson8m2-aobus-pinctrl" - "amlogic,meson-gxbb-periphs-pinctrl" - "amlogic,meson-gxbb-aobus-pinctrl" - "amlogic,meson-gxl-periphs-pinctrl" - "amlogic,meson-gxl-aobus-pinctrl" - "amlogic,meson-axg-periphs-pinctrl" - "amlogic,meson-axg-aobus-pinctrl" - "amlogic,meson-g12a-periphs-pinctrl" - "amlogic,meson-g12a-aobus-pinctrl" - "amlogic,meson-a1-periphs-pinctrl" - - reg: address and size of registers controlling irq functionality - -=== GPIO sub-nodes === - -The GPIO bank for the controller is represented as a sub-node and it acts as a -GPIO controller. - -Required properties for sub-nodes are: - - reg: should contain a list of address and size, one tuple for each entry - in reg-names. - - reg-names: an array of strings describing the "reg" entries. - Must contain "mux" and "gpio". - May contain "pull", "pull-enable" and "ds" when appropriate. - - gpio-controller: identifies the node as a gpio controller - - #gpio-cells: must be 2 - -=== Other sub-nodes === - -Child nodes without the "gpio-controller" represent some desired -configuration for a pin or a group. Those nodes can be pinmux nodes or -configuration nodes. - -Required properties for pinmux nodes are: - - groups: a list of pinmux groups. The list of all available groups - depends on the SoC and can be found in driver sources. - - function: the name of a function to activate for the specified set - of groups. The list of all available functions depends on the SoC - and can be found in driver sources. - -Required properties for configuration nodes: - - pins: a list of pin names - -Configuration nodes support the following generic properties, as -described in file pinctrl-bindings.txt: - - "bias-disable" - - "bias-pull-up" - - "bias-pull-down" - - "output-enable" - - "output-disable" - - "output-low" - - "output-high" - -Optional properties : - - drive-strength-microamp: Drive strength for the specified pins in uA. - This property is only valid for G12A and newer. - -=== Example === - - pinctrl: pinctrl@c1109880 { - compatible = "amlogic,meson8-cbus-pinctrl"; - reg = <0xc1109880 0x10>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - gpio: banks@c11080b0 { - reg = <0xc11080b0 0x28>, - <0xc11080e8 0x18>, - <0xc1108120 0x18>, - <0xc1108030 0x30>; - reg-names = "mux", "pull", "pull-enable", "gpio"; - gpio-controller; - #gpio-cells = <2>; - }; - - nand { - mux { - groups = "nand_io", "nand_io_ce0", "nand_io_ce1", - "nand_io_rb0", "nand_ale", "nand_cle", - "nand_wen_clk", "nand_ren_clk", "nand_dqs", - "nand_ce2", "nand_ce3"; - function = "nand"; - }; - }; - }; diff --git a/dts/Bindings/pinctrl/microchip,sparx5-sgpio.yaml b/dts/Bindings/pinctrl/microchip,sparx5-sgpio.yaml index 4fe35e6509..0df4e114fd 100644 --- a/dts/Bindings/pinctrl/microchip,sparx5-sgpio.yaml +++ b/dts/Bindings/pinctrl/microchip,sparx5-sgpio.yaml @@ -68,6 +68,13 @@ properties: clock, and larger than zero. default: 12500000 + resets: + maxItems: 1 + + reset-names: + items: + - const: switch + patternProperties: "^gpio@[0-1]$": type: object @@ -138,7 +145,7 @@ examples: clocks = <&sys_clk>; pinctrl-0 = <&sgpio2_pins>; pinctrl-names = "default"; - reg = <0x1101059c 0x100>; + reg = <0x1101059c 0x118>; microchip,sgpio-port-ranges = <0 0>, <16 18>, <28 31>; bus-frequency = <25000000>; sgpio_in2: gpio@0 { diff --git a/dts/Bindings/pinctrl/mscc,ocelot-pinctrl.txt b/dts/Bindings/pinctrl/mscc,ocelot-pinctrl.txt deleted file mode 100644 index db99bd95d4..0000000000 --- a/dts/Bindings/pinctrl/mscc,ocelot-pinctrl.txt +++ /dev/null @@ -1,41 +0,0 @@ -Microsemi Ocelot pin controller Device Tree Bindings ----------------------------------------------------- - -Required properties: - - compatible : Should be "mscc,ocelot-pinctrl", - "mscc,jaguar2-pinctrl", "microchip,sparx5-pinctrl", - "mscc,luton-pinctrl" or "mscc,serval-pinctrl" - - reg : Address and length of the register set for the device - - gpio-controller : Indicates this device is a GPIO controller - - #gpio-cells : Must be 2. - The first cell is the pin number and the - second cell specifies GPIO flags, as defined in - <dt-bindings/gpio/gpio.h>. - - gpio-ranges : Range of pins managed by the GPIO controller. - - -The ocelot-pinctrl driver uses the generic pin multiplexing and generic pin -configuration documented in pinctrl-bindings.txt. - -The following generic properties are supported: - - function - - pins - -Example: - gpio: pinctrl@71070034 { - compatible = "mscc,ocelot-pinctrl"; - reg = <0x71070034 0x28>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&gpio 0 0 22>; - - uart_pins: uart-pins { - pins = "GPIO_6", "GPIO_7"; - function = "uart"; - }; - - uart2_pins: uart2-pins { - pins = "GPIO_12", "GPIO_13"; - function = "uart2"; - }; - }; diff --git a/dts/Bindings/pinctrl/mscc,ocelot-pinctrl.yaml b/dts/Bindings/pinctrl/mscc,ocelot-pinctrl.yaml new file mode 100644 index 0000000000..dbb3e1bd58 --- /dev/null +++ b/dts/Bindings/pinctrl/mscc,ocelot-pinctrl.yaml @@ -0,0 +1,116 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/mscc,ocelot-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microsemi Ocelot pin controller + +maintainers: + - Alexandre Belloni <alexandre.belloni@bootlin.com> + - Lars Povlsen <lars.povlsen@microchip.com> + +properties: + compatible: + enum: + - microchip,lan966x-pinctrl + - microchip,sparx5-pinctrl + - mscc,jaguar2-pinctrl + - mscc,luton-pinctrl + - mscc,ocelot-pinctrl + - mscc,serval-pinctrl + - mscc,servalt-pinctrl + + reg: + items: + - description: Base address + - description: Extended pin configuration registers + minItems: 1 + + gpio-controller: true + + '#gpio-cells': + const: 2 + + gpio-ranges: true + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + resets: + maxItems: 1 + + reset-names: + description: Optional shared switch reset. + items: + - const: switch + +patternProperties: + '-pins$': + type: object + allOf: + - $ref: pinmux-node.yaml + - $ref: pincfg-node.yaml + + properties: + function: true + pins: true + output-high: true + output-low: true + drive-strength: true + + required: + - function + - pins + + additionalProperties: false + +required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + - gpio-ranges + +allOf: + - $ref: pinctrl.yaml# + - if: + properties: + compatible: + contains: + enum: + - microchip,lan966x-pinctrl + - microchip,sparx5-pinctrl + then: + properties: + reg: + minItems: 2 + +additionalProperties: false + +examples: + - | + gpio: pinctrl@71070034 { + compatible = "mscc,ocelot-pinctrl"; + reg = <0x71070034 0x28>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&gpio 0 0 22>; + + uart_pins: uart-pins { + pins = "GPIO_6", "GPIO_7"; + function = "uart"; + }; + + uart2_pins: uart2-pins { + pins = "GPIO_12", "GPIO_13"; + function = "uart2"; + }; + }; + +... diff --git a/dts/Bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml b/dts/Bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml new file mode 100644 index 0000000000..3e84728988 --- /dev/null +++ b/dts/Bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml @@ -0,0 +1,217 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/nuvoton,npcm845-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton NPCM845 Pin Controller and GPIO + +maintainers: + - Tomer Maimon <tmaimon77@gmail.com> + +description: + The Nuvoton BMC NPCM8XX Pin Controller multi-function routed through + the multiplexing block, Each pin supports GPIO functionality (GPIOx) + and multiple functions that directly connect the pin to different + hardware blocks. + +properties: + compatible: + const: nuvoton,npcm845-pinctrl + + ranges: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + + nuvoton,sysgcr: + $ref: /schemas/types.yaml#/definitions/phandle + description: a phandle to access GCR registers. + +patternProperties: + '^gpio@': + type: object + additionalProperties: false + + description: + Eight GPIO banks that each contain 32 GPIOs. + + properties: + gpio-controller: true + + '#gpio-cells': + const: 2 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-ranges: + maxItems: 1 + + required: + - gpio-controller + - '#gpio-cells' + - reg + - interrupts + - gpio-ranges + + '-mux$': + $ref: pinmux-node.yaml# + + properties: + groups: + description: + One or more groups of pins to mux to a certain function + items: + enum: [ iox1, iox2, smb1d, smb2d, lkgpo1, lkgpo2, ioxh, gspi, + smb5b, smb5c, lkgpo0, pspi, jm1, jm2, smb4den, smb4b, + smb4c, smb15, smb16, smb17, smb18, smb19, smb20, smb21, + smb22, smb23, smb23b, smb4d, smb14, smb5, smb4, smb3, + spi0cs1, spi0cs2, spi0cs3, spi1cs0, spi1cs1, spi1cs2, + spi1cs3, spi1cs23, smb3c, smb3b, bmcuart0a, uart1, jtag2, + bmcuart1, uart2, sg1mdio, bmcuart0b, r1err, r1md, r1oen, + r2oen, rmii3, r3oen, smb3d, fanin0, fanin1, fanin2, fanin3, + fanin4, fanin5, fanin6, fanin7, fanin8, fanin9, fanin10, + fanin11, fanin12, fanin13, fanin14, fanin15, pwm0, pwm1, pwm2, + pwm3, r2, r2err, r2md, r3rxer, ga20kbc, smb5d, lpc, espi, rg2, + ddr, i3c0, i3c1, i3c2, i3c3, i3c4, i3c5, smb0, smb1, smb2, + smb2c, smb2b, smb1c, smb1b, smb8, smb9, smb10, smb11, sd1, + sd1pwr, pwm4, pwm5, pwm6, pwm7, pwm8, pwm9, pwm10, pwm11, + mmc8, mmc, mmcwp, mmccd, mmcrst, clkout, serirq, lpcclk, + scipme, smi, smb6, smb7, spi1, faninx, r1, spi3, spi3cs1, + spi3quad, spi3cs2, spi3cs3, nprd_smi, smb0b, smb0c, smb0den, + smb0d, ddc, rg2mdio, wdog1, wdog2, smb12, smb13, spix, + spixcs1, clkreq, hgpio0, hgpio1, hgpio2, hgpio3, hgpio4, + hgpio5, hgpio6, hgpio7 ] + + function: + description: + The function that a group of pins is muxed to + enum: [ iox1, iox2, smb1d, smb2d, lkgpo1, lkgpo2, ioxh, gspi, + smb5b, smb5c, lkgpo0, pspi, jm1, jm2, smb4den, smb4b, + smb4c, smb15, smb16, smb17, smb18, smb19, smb20, smb21, + smb22, smb23, smb23b, smb4d, smb14, smb5, smb4, smb3, + spi0cs1, spi0cs2, spi0cs3, spi1cs0, spi1cs1, spi1cs2, + spi1cs3, spi1cs23, smb3c, smb3b, bmcuart0a, uart1, jtag2, + bmcuart1, uart2, sg1mdio, bmcuart0b, r1err, r1md, r1oen, + r2oen, rmii3, r3oen, smb3d, fanin0, fanin1, fanin2, fanin3, + fanin4, fanin5, fanin6, fanin7, fanin8, fanin9, fanin10, + fanin11, fanin12, fanin13, fanin14, fanin15, pwm0, pwm1, pwm2, + pwm3, r2, r2err, r2md, r3rxer, ga20kbc, smb5d, lpc, espi, rg2, + ddr, i3c0, i3c1, i3c2, i3c3, i3c4, i3c5, smb0, smb1, smb2, + smb2c, smb2b, smb1c, smb1b, smb8, smb9, smb10, smb11, sd1, + sd1pwr, pwm4, pwm5, pwm6, pwm7, pwm8, pwm9, pwm10, pwm11, + mmc8, mmc, mmcwp, mmccd, mmcrst, clkout, serirq, lpcclk, + scipme, smi, smb6, smb7, spi1, faninx, r1, spi3, spi3cs1, + spi3quad, spi3cs2, spi3cs3, nprd_smi, smb0b, smb0c, smb0den, + smb0d, ddc, rg2mdio, wdog1, wdog2, smb12, smb13, spix, + spixcs1, clkreq, hgpio0, hgpio1, hgpio2, hgpio3, hgpio4, + hgpio5, hgpio6, hgpio7 ] + + dependencies: + groups: [ function ] + function: [ groups ] + + additionalProperties: false + + '^pin': + $ref: pincfg-node.yaml# + + properties: + pins: + description: + A list of pins to configure in certain ways, such as enabling + debouncing + items: + pattern: '^GPIO([0-9]|[0-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-6])' + + bias-disable: true + + bias-pull-up: true + + bias-pull-down: true + + input-enable: true + + output-low: true + + output-high: true + + drive-push-pull: true + + drive-open-drain: true + + input-debounce: + description: + Debouncing periods in microseconds, one period per interrupt + bank found in the controller + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 4 + + slew-rate: + description: | + 0: Low rate + 1: High rate + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + + drive-strength: + enum: [ 0, 1, 2, 4, 8, 12 ] + + additionalProperties: false + +allOf: + - $ref: pinctrl.yaml# + +required: + - compatible + - ranges + - '#address-cells' + - '#size-cells' + - nuvoton,sysgcr + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/gpio/gpio.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pinctrl: pinctrl@f0010000 { + compatible = "nuvoton,npcm845-pinctrl"; + ranges = <0x0 0x0 0xf0010000 0x8000>; + #address-cells = <1>; + #size-cells = <1>; + nuvoton,sysgcr = <&gcr>; + + gpio0: gpio@0 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x0 0xb0>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + gpio-ranges = <&pinctrl 0 0 32>; + }; + + fanin0_pin: fanin0-mux { + groups = "fanin0"; + function = "fanin0"; + }; + + pin34_slew: pin34-slew { + pins = "GPIO34/I3C4_SDA"; + bias-disable; + }; + }; + }; diff --git a/dts/Bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml b/dts/Bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml new file mode 100644 index 0000000000..7b7f840ffc --- /dev/null +++ b/dts/Bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml @@ -0,0 +1,161 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/nuvoton,wpcm450-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton WPCM450 pin control and GPIO + +maintainers: + - Jonathan Neuschäfer <j.neuschaefer@gmx.net> + +properties: + compatible: + const: nuvoton,wpcm450-pinctrl + + reg: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + # There are three kinds of subnodes: + # 1. a GPIO controller node for each GPIO bank + # 2. a pinmux node configures pin muxing for a group of pins (e.g. rmii2) + # 3. a pinconf node configures properties of a single pin + + "^gpio@[0-7]$": + type: object + additionalProperties: false + + description: + Eight GPIO banks (gpio@0 to gpio@7), that each contain between 14 and 18 + GPIOs. Some GPIOs support interrupts. + + properties: + reg: + minimum: 0 + maximum: 7 + + gpio-controller: true + + "#gpio-cells": + const: 2 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + interrupts: + maxItems: 3 + description: + The interrupts associated with this GPIO bank + + required: + - reg + - gpio-controller + - '#gpio-cells' + + "^mux-": + $ref: pinmux-node.yaml# + + properties: + groups: + description: + One or more groups of pins to mux to a certain function + items: + enum: [ smb3, smb4, smb5, scs1, scs2, scs3, smb0, smb1, smb2, bsp, + hsp1, hsp2, r1err, r1md, rmii2, r2err, r2md, kbcc, dvo, + clko, smi, uinc, gspi, mben, xcs2, xcs1, sdio, sspi, fi0, + fi1, fi2, fi3, fi4, fi5, fi6, fi7, fi8, fi9, fi10, fi11, + fi12, fi13, fi14, fi15, pwm0, pwm1, pwm2, pwm3, pwm4, pwm5, + pwm6, pwm7, hg0, hg1, hg2, hg3, hg4, hg5, hg6, hg7 ] + function: + description: + The function that a group of pins is muxed to + enum: [ smb3, smb4, smb5, scs1, scs2, scs3, smb0, smb1, smb2, bsp, + hsp1, hsp2, r1err, r1md, rmii2, r2err, r2md, kbcc, dvo0, + dvo1, dvo2, dvo3, dvo4, dvo5, dvo6, dvo7, clko, smi, uinc, + gspi, mben, xcs2, xcs1, sdio, sspi, fi0, fi1, fi2, fi3, fi4, + fi5, fi6, fi7, fi8, fi9, fi10, fi11, fi12, fi13, fi14, fi15, + pwm0, pwm1, pwm2, pwm3, pwm4, pwm5, pwm6, pwm7, hg0, hg1, + hg2, hg3, hg4, hg5, hg6, hg7, gpio ] + + dependencies: + groups: [ function ] + function: [ groups ] + + additionalProperties: false + + "^cfg-": + $ref: pincfg-node.yaml# + + properties: + pins: + description: + A list of pins to configure in certain ways, such as enabling + debouncing + items: + pattern: "^gpio1?[0-9]{1,2}$" + + input-debounce: true + + additionalProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + pinctrl: pinctrl@b8003000 { + compatible = "nuvoton,wpcm450-pinctrl"; + reg = <0xb8003000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + + gpio0: gpio@0 { + reg = <0>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>, + <3 IRQ_TYPE_LEVEL_HIGH>, + <4 IRQ_TYPE_LEVEL_HIGH>; + }; + + mux-rmii2 { + groups = "rmii2"; + function = "rmii2"; + }; + + pinmux_uid: mux-uid { + groups = "gspi", "sspi"; + function = "gpio"; + }; + + pinctrl_uid: cfg-uid { + pins = "gpio14"; + input-debounce = <1>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uid>, <&pinmux_uid>; + + button-uid { + label = "UID"; + linux,code = <102>; + gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/dts/Bindings/pinctrl/nvidia,tegra-pinmux-common.yaml b/dts/Bindings/pinctrl/nvidia,tegra-pinmux-common.yaml new file mode 100644 index 0000000000..96c608bcb8 --- /dev/null +++ b/dts/Bindings/pinctrl/nvidia,tegra-pinmux-common.yaml @@ -0,0 +1,178 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra-pinmux-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra Pinmux Controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jonathan Hunter <jonathanh@nvidia.com> + +description: | + Please refer to pinctrl-bindings.txt in this directory for details of the + common pinctrl bindings used by client devices, including the meaning of + the phrase "pin configuration node". + + Tegra's pin configuration nodes act as a container for an arbitrary number + of subnodes. Each of these subnodes represents some desired configuration + for a pin, a group, or a list of pins or groups. This configuration can + include the mux function to select on those pin(s)/ group(s), and various + pin configuration parameters, such as pull-up, tristate, drive strength, + etc. + + The name of each subnode is not important; all subnodes should be + enumerated and processed purely based on their content. + + Each subnode only affects those parameters that are explicitly listed. In + other words, a subnode that lists a mux function but no pin configuration + parameters implies no information about any pin configuration parameters. + + Similarly, a pin subnode that describes a pullup parameter implies no + information about e.g. the mux function or tristate parameter. For this + reason, even seemingly boolean values are actually tristates in this + binding: unspecified, off, or on. Unspecified is represented as an absent + property, and off/on are represented as integer values 0 and 1. + + Note that many of these properties are only valid for certain specific pins + or groups. See the Tegra TRM and various pinmux spreadsheets for complete + details regarding which groups support which functionality. The Linux + pinctrl driver may also be a useful reference, since it consolidates, + disambiguates, and corrects data from all those sources. + +properties: + nvidia,pins: + $ref: /schemas/types.yaml#/definitions/string-array + description: An array of strings. Each string contains the name of a pin + or group. Valid values for these names are listed below. + + nvidia,function: + $ref: /schemas/types.yaml#/definitions/string + description: A string containing the name of the function to mux to the + pin or group. Valid values for function names are listed below. See the + Tegra TRM to determine which are valid for each pin or group. + + nvidia,pull: + description: Pull-down/up setting to apply to the pin. + $ref: /schemas/types.yaml#/definitions/uint32 + oneOf: + - description: none + const: 0 + - description: down + const: 1 + - description: up + const: 2 + + nvidia,tristate: + description: Tristate setting to apply to the pin. + $ref: /schemas/types.yaml#/definitions/uint32 + oneOf: + - description: drive + const: 0 + - description: tristate + const: 1 + + nvidia,schmitt: + description: Enable Schmitt trigger on the input. + $ref: /schemas/types.yaml#/definitions/uint32 + oneOf: + - description: disable Schmitt trigger on the input + const: 0 + - description: enable Schmitt trigger on the input + const: 1 + + nvidia,pull-down-strength: + description: Controls drive strength. 0 is weakest. The range of valid + values depends on the pingroup. See "CAL_DRVDN" in the Tegra TRM. + $ref: /schemas/types.yaml#/definitions/uint32 + + nvidia,pull-up-strength: + description: Controls drive strength. 0 is weakest. The range of valid + values depends on the pingroup. See "CAL_DRVUP" in the Tegra TRM. + $ref: /schemas/types.yaml#/definitions/uint32 + + nvidia,high-speed-mode: + description: Enable high speed mode the pins. + $ref: /schemas/types.yaml#/definitions/uint32 + oneOf: + - description: normal speed mode + const: 0 + - description: high speed mode + const: 1 + + nvidia,low-power-mode: + description: Controls the drive power or current. Valid values are from 0 + through 3, where 0 specifies the least power and 3 specifies the most + power. See "Low Power Mode" or "LPMD1" and "LPMD0" in the Tegra TRM. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3 ] + + nvidia,enable-input: + description: Enable the pin's input path. + $ref: /schemas/types.yaml#/definitions/uint32 + oneOf: + - description: disable input (i.e. output only) + const: 0 + - description: enable input + const: 1 + + nvidia,open-drain: + description: Open-drain configuration for the pin. + $ref: /schemas/types.yaml#/definitions/uint32 + oneOf: + - description: disable open-drain + const: 0 + - description: enable open-drain + const: 1 + + nvidia,lock: + description: Lock the pin configuration against further changes until + reset. + $ref: /schemas/types.yaml#/definitions/uint32 + oneOf: + - description: disable pin configuration lock + const: 0 + - description: enable pin configuration lock + const: 1 + + nvidia,io-reset: + description: reset the I/O path + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + + nvidia,rcv-sel: + description: select VIL/VIH receivers + $ref: /schemas/types.yaml#/definitions/uint32 + oneOf: + - description: normal receivers + const: 0 + - description: high-voltage receivers + const: 1 + + nvidia,drive-type: + description: Drive type to configure for the pin. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3 ] + + nvidia,io-hv: + description: Select high-voltage receivers. + $ref: /schemas/types.yaml#/definitions/uint32 + oneOf: + - description: Use normal receivers. + const: 0 + - description: Use high-voltage receivers. + const: 1 + + nvidia,slew-rate-rising: + description: Controls rising signal slew rate. 0 is fastest. The range of + valid values depends on the pingroup. See "DRVDN_SLWR" in the Tegra TRM. + $ref: /schemas/types.yaml#/definitions/uint32 + + nvidia,slew-rate-falling: + description: Controls falling signal slew rate. 0 is fastest. The range of + valid values depends on the pingroup. See "DRVUP_SLWF" in the Tegra TRM. + $ref: /schemas/types.yaml#/definitions/uint32 + +additionalProperties: true +... diff --git a/dts/Bindings/pinctrl/nvidia,tegra114-pinmux.txt b/dts/Bindings/pinctrl/nvidia,tegra114-pinmux.txt deleted file mode 100644 index fb70856c5b..0000000000 --- a/dts/Bindings/pinctrl/nvidia,tegra114-pinmux.txt +++ /dev/null @@ -1,131 +0,0 @@ -NVIDIA Tegra114 pinmux controller - -The Tegra114 pinctrl binding is very similar to the Tegra20 and Tegra30 -pinctrl binding, as described in nvidia,tegra20-pinmux.txt and -nvidia,tegra30-pinmux.txt. In fact, this document assumes that binding as -a baseline, and only documents the differences between the two bindings. - -Required properties: -- compatible: "nvidia,tegra114-pinmux" -- reg: Should contain the register physical address and length for each of - the pad control and mux registers. The first bank of address must be the - driver strength pad control register address and second bank address must - be pinmux register address. - -Tegra114 adds the following optional properties for pin configuration subnodes: -- nvidia,enable-input: Integer. Enable the pin's input path. 0: no, 1: yes. -- nvidia,open-drain: Integer. Enable open drain mode. 0: no, 1: yes. -- nvidia,lock: Integer. Lock the pin configuration against further changes - until reset. 0: no, 1: yes. -- nvidia,io-reset: Integer. Reset the IO path. 0: no, 1: yes. -- nvidia,rcv-sel: Integer. Select VIL/VIH receivers. 0: normal, 1: high. -- nvidia,drive-type: Integer. Valid range 0...3. - -As with Tegra20 and Terga30, see the Tegra TRM for complete details regarding -which groups support which functionality. - -Valid values for pin and group names are: - - per-pin mux groups: - - These all support nvidia,function, nvidia,tristate, nvidia,pull, - nvidia,enable-input, nvidia,lock. Some support nvidia,open-drain, - nvidia,io-reset and nvidia,rcv-sel. - - ulpi_data0_po1, ulpi_data1_po2, ulpi_data2_po3, ulpi_data3_po4, - ulpi_data4_po5, ulpi_data5_po6, ulpi_data6_po7, ulpi_data7_po0, - ulpi_clk_py0, ulpi_dir_py1, ulpi_nxt_py2, ulpi_stp_py3, dap3_fs_pp0, - dap3_din_pp1, dap3_dout_pp2, dap3_sclk_pp3, pv0, pv1, sdmmc1_clk_pz0, - sdmmc1_cmd_pz1, sdmmc1_dat3_py4, sdmmc1_dat2_py5, sdmmc1_dat1_py6, - sdmmc1_dat0_py7, clk2_out_pw5, clk2_req_pcc5, hdmi_int_pn7, ddc_scl_pv4, - ddc_sda_pv5, uart2_rxd_pc3, uart2_txd_pc2, uart2_rts_n_pj6, - uart2_cts_n_pj5, uart3_txd_pw6, uart3_rxd_pw7, uart3_cts_n_pa1, - uart3_rts_n_pc0, pu0, pu1, pu2, pu3, pu4, pu5, pu6, gen1_i2c_sda_pc5, - gen1_i2c_scl_pc4, dap4_fs_pp4, dap4_din_pp5, dap4_dout_pp6, dap4_sclk_pp7, - clk3_out_pee0, clk3_req_pee1, gmi_wp_n_pc7, gmi_iordy_pi5, gmi_wait_pi7, - gmi_adv_n_pk0, gmi_clk_pk1, gmi_cs0_n_pj0, gmi_cs1_n_pj2, gmi_cs2_n_pk3, - gmi_cs3_n_pk4, gmi_cs4_n_pk2, gmi_cs6_n_pi3, gmi_cs7_n_pi6, gmi_ad0_pg0, - gmi_ad1_pg1, gmi_ad2_pg2, gmi_ad3_pg3, gmi_ad4_pg4, gmi_ad5_pg5, - gmi_ad6_pg6, gmi_ad7_pg7, gmi_ad8_ph0, gmi_ad9_ph1, gmi_ad10_ph2, - gmi_ad11_ph3, gmi_ad12_ph4, gmi_ad13_ph5, gmi_ad14_ph6, gmi_ad15_ph7, - gmi_a16_pj7, gmi_a17_pb0, gmi_a18_pb1, gmi_a19_pk7, gmi_wr_n_pi0, - gmi_oe_n_pi1, gmi_dqs_p_pj3, gmi_rst_n_pi4, gen2_i2c_scl_pt5, - gen2_i2c_sda_pt6, sdmmc4_clk_pcc4, sdmmc4_cmd_pt7, sdmmc4_dat0_paa0, - sdmmc4_dat1_paa1, sdmmc4_dat2_paa2, sdmmc4_dat3_paa3, sdmmc4_dat4_paa4, - sdmmc4_dat5_paa5, sdmmc4_dat6_paa6, sdmmc4_dat7_paa7, cam_mclk_pcc0, - pcc1, pbb0, cam_i2c_scl_pbb1, cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6, - pbb7, pcc2, pwr_i2c_scl_pz6, pwr_i2c_sda_pz7, kb_row0_pr0, kb_row1_pr1, - kb_row2_pr2, kb_row3_pr3, kb_row4_pr4, kb_row5_pr5, kb_row6_pr6, - kb_row7_pr7, kb_row8_ps0, kb_row9_ps1, kb_row10_ps2, kb_col0_pq0, - kb_col1_pq1, kb_col2_pq2, kb_col3_pq3, kb_col4_pq4, kb_col5_pq5, - kb_col6_pq6, kb_col7_pq7, clk_32k_out_pa0, sys_clk_req_pz5, core_pwr_req, - cpu_pwr_req, pwr_int_n, owr, dap1_fs_pn0, dap1_din_pn1, dap1_dout_pn2, - dap1_sclk_pn3, clk1_req_pee2, clk1_out_pw4, spdif_in_pk6, spdif_out_pk5, - dap2_fs_pa2, dap2_din_pa4, dap2_dout_pa5, dap2_sclk_pa3, dvfs_pwm_px0, - gpio_x1_aud_px1, gpio_x3_aud_px3, dvfs_clk_px2, gpio_x4_aud_px4, - gpio_x5_aud_px5, gpio_x6_aud_px6, gpio_x7_aud_px7, sdmmc3_clk_pa6, - sdmmc3_cmd_pa7, sdmmc3_dat0_pb7, sdmmc3_dat1_pb6, sdmmc3_dat2_pb5, - sdmmc3_dat3_pb4, hdmi_cec_pee3, sdmmc1_wp_n_pv3, sdmmc3_cd_n_pv2, - gpio_w2_aud_pw2, gpio_w3_aud_pw3, usb_vbus_en0_pn4, usb_vbus_en1_pn5, - sdmmc3_clk_lb_in_pee5, sdmmc3_clk_lb_out_pee4, reset_out_n. - - drive groups: - - These all support nvidia,pull-down-strength, nvidia,pull-up-strength, - nvidia,slew-rate-rising, nvidia,slew-rate-falling. Most but not all - support nvidia,high-speed-mode, nvidia,schmitt, nvidia,low-power-mode - and nvidia,drive-type. - - ao1, ao2, at1, at2, at3, at4, at5, cdev1, cdev2, dap1, dap2, dap3, dap4, - dbg, sdio3, spi, uaa, uab, uart2, uart3, sdio1, ddc, gma, gme, gmf, gmg, - gmh, owr, uda. - -Valid values for nvidia,functions are: - - blink, cec, cldvfs, clk12, cpu, dap, dap1, dap2, dev3, displaya, - displaya_alt, displayb, dtv, emc_dll, extperiph1, extperiph2, - extperiph3, gmi, gmi_alt, hda, hsi, i2c1, i2c2, i2c3, i2c4, i2cpwr, - i2s0, i2s1, i2s2, i2s3, i2s4, irda, kbc, nand, nand_alt, owr, pmi, - pwm0, pwm1, pwm2, pwm3, pwron, reset_out_n, rsvd1, rsvd2, rsvd3, - rsvd4, sdmmc1, sdmmc2, sdmmc3, sdmmc4, soc, spdif, spi1, spi2, spi3, - spi4, spi5, spi6, sysclk, trace, uarta, uartb, uartc, uartd, ulpi, - usb, vgp1, vgp2, vgp3, vgp4, vgp5, vgp6, vi, vi_alt1, vi_alt3 - -Example: - - pinmux: pinmux { - compatible = "nvidia,tegra114-pinmux"; - reg = <0x70000868 0x148 /* Pad control registers */ - 0x70003000 0x40c>; /* PinMux registers */ - }; - -Example board file extract: - - pinctrl { - sdmmc4_default: pinmux { - sdmmc4_clk_pcc4 { - nvidia,pins = "sdmmc4_clk_pcc4", - nvidia,function = "sdmmc4"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - }; - sdmmc4_dat0_paa0 { - nvidia,pins = "sdmmc4_dat0_paa0", - "sdmmc4_dat1_paa1", - "sdmmc4_dat2_paa2", - "sdmmc4_dat3_paa3", - "sdmmc4_dat4_paa4", - "sdmmc4_dat5_paa5", - "sdmmc4_dat6_paa6", - "sdmmc4_dat7_paa7"; - nvidia,function = "sdmmc4"; - nvidia,pull = <2>; - nvidia,tristate = <0>; - }; - }; - }; - - sdhci@78000400 { - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc4_default>; - }; diff --git a/dts/Bindings/pinctrl/nvidia,tegra114-pinmux.yaml b/dts/Bindings/pinctrl/nvidia,tegra114-pinmux.yaml new file mode 100644 index 0000000000..1690c0ef55 --- /dev/null +++ b/dts/Bindings/pinctrl/nvidia,tegra114-pinmux.yaml @@ -0,0 +1,153 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra114-pinmux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra114 pinmux Controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + compatible: + const: nvidia,tegra114-pinmux + + reg: + items: + - description: pad control registers + - description: mux registers + +patternProperties: + "^pinmux(-[a-z0-9-_]+)?$": + type: object + + # pin groups + additionalProperties: + $ref: nvidia,tegra-pinmux-common.yaml + additionalProperties: false + properties: + nvidia,pins: + items: + enum: [ ulpi_data0_po1, ulpi_data1_po2, ulpi_data2_po3, + ulpi_data3_po4, ulpi_data4_po5, ulpi_data5_po6, + ulpi_data6_po7, ulpi_data7_po0, ulpi_clk_py0, ulpi_dir_py1, + ulpi_nxt_py2, ulpi_stp_py3, dap3_fs_pp0, dap3_din_pp1, + dap3_dout_pp2, dap3_sclk_pp3, pv0, pv1, sdmmc1_clk_pz0, + sdmmc1_cmd_pz1, sdmmc1_dat3_py4, sdmmc1_dat2_py5, + sdmmc1_dat1_py6, sdmmc1_dat0_py7, clk2_out_pw5, + clk2_req_pcc5, hdmi_int_pn7, ddc_scl_pv4, ddc_sda_pv5, + uart2_rxd_pc3, uart2_txd_pc2, uart2_rts_n_pj6, + uart2_cts_n_pj5, uart3_txd_pw6, uart3_rxd_pw7, + uart3_cts_n_pa1, uart3_rts_n_pc0, pu0, pu1, pu2, pu3, pu4, + pu5, pu6, gen1_i2c_sda_pc5, gen1_i2c_scl_pc4, dap4_fs_pp4, + dap4_din_pp5, dap4_dout_pp6, dap4_sclk_pp7, clk3_out_pee0, + clk3_req_pee1, gmi_wp_n_pc7, gmi_iordy_pi5, gmi_wait_pi7, + gmi_adv_n_pk0, gmi_clk_pk1, gmi_cs0_n_pj0, gmi_cs1_n_pj2, + gmi_cs2_n_pk3, gmi_cs3_n_pk4, gmi_cs4_n_pk2, gmi_cs6_n_pi3, + gmi_cs7_n_pi6, gmi_ad0_pg0, gmi_ad1_pg1, gmi_ad2_pg2, + gmi_ad3_pg3, gmi_ad4_pg4, gmi_ad5_pg5, gmi_ad6_pg6, + gmi_ad7_pg7, gmi_ad8_ph0, gmi_ad9_ph1, gmi_ad10_ph2, + gmi_ad11_ph3, gmi_ad12_ph4, gmi_ad13_ph5, gmi_ad14_ph6, + gmi_ad15_ph7, gmi_a16_pj7, gmi_a17_pb0, gmi_a18_pb1, + gmi_a19_pk7, gmi_wr_n_pi0, gmi_oe_n_pi1, gmi_dqs_p_pj3, + gmi_rst_n_pi4, gen2_i2c_scl_pt5, gen2_i2c_sda_pt6, + sdmmc4_clk_pcc4, sdmmc4_cmd_pt7, sdmmc4_dat0_paa0, + sdmmc4_dat1_paa1, sdmmc4_dat2_paa2, sdmmc4_dat3_paa3, + sdmmc4_dat4_paa4, sdmmc4_dat5_paa5, sdmmc4_dat6_paa6, + sdmmc4_dat7_paa7, cam_mclk_pcc0, pcc1, pbb0, + cam_i2c_scl_pbb1, cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6, + pbb7, pcc2, pwr_i2c_scl_pz6, pwr_i2c_sda_pz7, kb_row0_pr0, + kb_row1_pr1, kb_row2_pr2, kb_row3_pr3, kb_row4_pr4, + kb_row5_pr5, kb_row6_pr6, kb_row7_pr7, kb_row8_ps0, + kb_row9_ps1, kb_row10_ps2, kb_col0_pq0, kb_col1_pq1, + kb_col2_pq2, kb_col3_pq3, kb_col4_pq4, kb_col5_pq5, + kb_col6_pq6, kb_col7_pq7, clk_32k_out_pa0, sys_clk_req_pz5, + core_pwr_req, cpu_pwr_req, pwr_int_n, owr, dap1_fs_pn0, + dap1_din_pn1, dap1_dout_pn2, dap1_sclk_pn3, clk1_req_pee2, + clk1_out_pw4, spdif_in_pk6, spdif_out_pk5, dap2_fs_pa2, + dap2_din_pa4, dap2_dout_pa5, dap2_sclk_pa3, dvfs_pwm_px0, + gpio_x1_aud_px1, gpio_x3_aud_px3, dvfs_clk_px2, + gpio_x4_aud_px4, gpio_x5_aud_px5, gpio_x6_aud_px6, + gpio_x7_aud_px7, sdmmc3_clk_pa6, sdmmc3_cmd_pa7, + sdmmc3_dat0_pb7, sdmmc3_dat1_pb6, sdmmc3_dat2_pb5, + sdmmc3_dat3_pb4, hdmi_cec_pee3, sdmmc1_wp_n_pv3, + sdmmc3_cd_n_pv2, gpio_w2_aud_pw2, gpio_w3_aud_pw3, + usb_vbus_en0_pn4, usb_vbus_en1_pn5, sdmmc3_clk_lb_in_pee5, + sdmmc3_clk_lb_out_pee4, reset_out_n, + # drive groups + drive_ao1, drive_ao2, drive_at1, drive_at2, drive_at3, + drive_at4, drive_at5, drive_cdev1, drive_cdev2, drive_dap1, + drive_dap2, drive_dap3, drive_dap4, drive_dbg, drive_sdio3, + drive_spi, drive_uaa, drive_uab, drive_uart2, drive_uart3, + drive_sdio1, drive_ddc, drive_gma, drive_gme, drive_gmf, + drive_gmg, drive_gmh, drive_owr, drive_uda ] + + nvidia,function: + enum: [ blink, cec, cldvfs, clk12, cpu, dap, dap1, dap2, dev3, + displaya, displaya_alt, displayb, dtv, emc_dll, extperiph1, + extperiph2, extperiph3, gmi, gmi_alt, hda, hsi, i2c1, i2c2, + i2c3, i2c4, i2cpwr, i2s0, i2s1, i2s2, i2s3, i2s4, irda, kbc, + nand, nand_alt, owr, pmi, pwm0, pwm1, pwm2, pwm3, pwron, + reset_out_n, rsvd1, rsvd2, rsvd3, rsvd4, sdmmc1, sdmmc2, + sdmmc3, sdmmc4, soc, spdif, spi1, spi2, spi3, spi4, spi5, + spi6, sysclk, trace, uarta, uartb, uartc, uartd, ulpi, usb, + vgp1, vgp2, vgp3, vgp4, vgp5, vgp6, vi, vi_alt1, vi_alt3 ] + + nvidia,pull: true + nvidia,tristate: true + nvidia,schmitt: true + nvidia,pull-down-strength: true + nvidia,pull-up-strength: true + nvidia,high-speed-mode: true + nvidia,low-power-mode: true + nvidia,enable-input: true + nvidia,open-drain: true + nvidia,lock: true + nvidia,io-reset: true + nvidia,rcv-sel: true + nvidia,drive-type: true + nvidia,slew-rate-rising: true + nvidia,slew-rate-falling: true + + required: + - nvidia,pins + +additionalProperties: false + +required: + - compatible + - reg + +examples: + - | + pinmux@70000868 { + compatible = "nvidia,tegra114-pinmux"; + reg = <0x70000868 0x148>, /* Pad control registers */ + <0x70003000 0x40c>; /* PinMux registers */ + + pinmux { + sdmmc4_clk_pcc4 { + nvidia,pins = "sdmmc4_clk_pcc4"; + nvidia,function = "sdmmc4"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + + sdmmc4_dat0_paa0 { + nvidia,pins = "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + }; + }; + }; +... diff --git a/dts/Bindings/pinctrl/nvidia,tegra124-dpaux-padctl.txt b/dts/Bindings/pinctrl/nvidia,tegra124-dpaux-padctl.txt deleted file mode 100644 index e0e886b735..0000000000 --- a/dts/Bindings/pinctrl/nvidia,tegra124-dpaux-padctl.txt +++ /dev/null @@ -1,59 +0,0 @@ -Device tree binding for NVIDIA Tegra DPAUX pad controller -======================================================== - -The Tegra Display Port Auxiliary (DPAUX) pad controller manages two pins -which can be assigned to either the DPAUX channel or to an I2C -controller. - -This document defines the device-specific binding for the DPAUX pad -controller. Refer to pinctrl-bindings.txt in this directory for generic -information about pin controller device tree bindings. Please refer to -the binding document ../display/tegra/nvidia,tegra20-host1x.txt for more -details on the DPAUX binding. - -Pin muxing: ------------ - -Child nodes contain the pinmux configurations following the conventions -from the pinctrl-bindings.txt document. - -Since only three configurations are possible, only three child nodes are -needed to describe the pin mux'ing options for the DPAUX pads. -Furthermore, given that the pad functions are only applicable to a -single set of pads, the child nodes only need to describe the pad group -the functions are being applied to rather than the individual pads. - -Required properties: -- groups: Must be "dpaux-io" -- function: Must be either "aux", "i2c" or "off". - -Example: --------- - - dpaux@545c0000 { - ... - - state_dpaux_aux: pinmux-aux { - groups = "dpaux-io"; - function = "aux"; - }; - - state_dpaux_i2c: pinmux-i2c { - groups = "dpaux-io"; - function = "i2c"; - }; - - state_dpaux_off: pinmux-off { - groups = "dpaux-io"; - function = "off"; - }; - }; - - ... - - i2c@7000d100 { - ... - pinctrl-0 = <&state_dpaux_i2c>; - pinctrl-1 = <&state_dpaux_off>; - pinctrl-names = "default", "idle"; - }; diff --git a/dts/Bindings/pinctrl/nvidia,tegra124-pinmux.txt b/dts/Bindings/pinctrl/nvidia,tegra124-pinmux.txt deleted file mode 100644 index f4d06bb0b5..0000000000 --- a/dts/Bindings/pinctrl/nvidia,tegra124-pinmux.txt +++ /dev/null @@ -1,153 +0,0 @@ -NVIDIA Tegra124 pinmux controller - -The Tegra124 pinctrl binding is very similar to the Tegra20 and Tegra30 -pinctrl binding, as described in nvidia,tegra20-pinmux.txt and -nvidia,tegra30-pinmux.txt. In fact, this document assumes that binding as -a baseline, and only documents the differences between the two bindings. - -Required properties: -- compatible: For Tegra124, must contain "nvidia,tegra124-pinmux". For - Tegra132, must contain '"nvidia,tegra132-pinmux", "nvidia-tegra124-pinmux"'. -- reg: Should contain a list of base address and size pairs for: - -- first entry - the drive strength and pad control registers. - -- second entry - the pinmux registers - -- third entry - the MIPI_PAD_CTRL register - -Tegra124 adds the following optional properties for pin configuration subnodes. -The macros for options are defined in the - include/dt-binding/pinctrl/pinctrl-tegra.h. -- nvidia,enable-input: Integer. Enable the pin's input path. - enable :TEGRA_PIN_ENABLE and - disable or output only: TEGRA_PIN_DISABLE. -- nvidia,open-drain: Integer. - enable: TEGRA_PIN_ENABLE. - disable: TEGRA_PIN_DISABLE. -- nvidia,lock: Integer. Lock the pin configuration against further changes - until reset. - enable: TEGRA_PIN_ENABLE. - disable: TEGRA_PIN_DISABLE. -- nvidia,io-reset: Integer. Reset the IO path. - enable: TEGRA_PIN_ENABLE. - disable: TEGRA_PIN_DISABLE. -- nvidia,rcv-sel: Integer. Select VIL/VIH receivers. - normal: TEGRA_PIN_DISABLE - high: TEGRA_PIN_ENABLE - -Please refer the Tegra TRM for complete details regarding which groups -support which functionality. - -Valid values for pin and group names are: - - per-pin mux groups: - - These all support nvidia,function, nvidia,tristate, nvidia,pull, - nvidia,enable-input. Some support nvidia,lock nvidia,open-drain, - nvidia,io-reset and nvidia,rcv-sel. - - ulpi_data0_po1, ulpi_data1_po2, ulpi_data2_po3, ulpi_data3_po4, - ulpi_data4_po5, ulpi_data5_po6, ulpi_data6_po7, ulpi_data7_po0, - ulpi_clk_py0, ulpi_dir_py1, ulpi_nxt_py2, ulpi_stp_py3, dap3_fs_pp0, - dap3_din_pp1, dap3_dout_pp2, dap3_sclk_pp3, pv0, pv1, sdmmc1_clk_pz0, - sdmmc1_cmd_pz1, sdmmc1_dat3_py4, sdmmc1_dat2_py5, sdmmc1_dat1_py6, - sdmmc1_dat0_py7, clk2_out_pw5, clk2_req_pcc5, hdmi_int_pn7, ddc_scl_pv4, - ddc_sda_pv5, uart2_rxd_pc3, uart2_txd_pc2, uart2_rts_n_pj6, - uart2_cts_n_pj5, uart3_txd_pw6, uart3_rxd_pw7, uart3_cts_n_pa1, - uart3_rts_n_pc0, pu0, pu1, pu2, pu3, pu4, pu5, pu6, gen1_i2c_scl_pc4, - gen1_i2c_sda_pc5, dap4_fs_pp4, dap4_din_pp5, dap4_dout_pp6, - dap4_sclk_pp7, clk3_out_pee0, clk3_req_pee1, pc7, pi5, pi7, pk0, pk1, - pj0, pj2, pk3, pk4, pk2, pi3, pi6, pg0, pg1, pg2, pg3, pg4, pg5, pg6, - pg7, ph0, ph1, ph2, ph3, ph4, ph5, ph6, ph7, pj7, pb0, pb1, pk7, pi0, - pi1, pi2, pi4, gen2_i2c_scl_pt5, gen2_i2c_sda_pt6, sdmmc4_clk_pcc4, - sdmmc4_cmd_pt7, sdmmc4_dat0_paa0, sdmmc4_dat1_paa1, sdmmc4_dat2_paa2, - sdmmc4_dat3_paa3, sdmmc4_dat4_paa4, sdmmc4_dat5_paa5, sdmmc4_dat6_paa6, - sdmmc4_dat7_paa7, cam_mclk_pcc0, pcc1, pbb0, cam_i2c_scl_pbb1, - cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6, pbb7, pcc2, jtag_rtck, - pwr_i2c_scl_pz6, pwr_i2c_sda_pz7, kb_row0_pr0, kb_row1_pr1, kb_row2_pr2, - kb_row3_pr3, kb_row4_pr4, kb_row5_pr5, kb_row6_pr6, kb_row7_pr7, - kb_row8_ps0, kb_row9_ps1, kb_row10_ps2, kb_row11_ps3, kb_row12_ps4, - kb_row13_ps5, kb_row14_ps6, kb_row15_ps7, kb_col0_pq0, kb_col1_pq1, - kb_col2_pq2, kb_col3_pq3, kb_col4_pq4, kb_col5_pq5, kb_col6_pq6, - kb_col7_pq7, clk_32k_out_pa0, core_pwr_req, cpu_pwr_req, pwr_int_n, - clk_32k_in, owr, dap1_fs_pn0, dap1_din_pn1, dap1_dout_pn2, - dap1_sclk_pn3, dap_mclk1_req_pee2, dap_mclk1_pw4, spdif_in_pk6, - spdif_out_pk5, dap2_fs_pa2, dap2_din_pa4, dap2_dout_pa5, dap2_sclk_pa3, - dvfs_pwm_px0, gpio_x1_aud_px1, gpio_x3_aud_px3, dvfs_clk_px2, - gpio_x4_aud_px4, gpio_x5_aud_px5, gpio_x6_aud_px6, gpio_x7_aud_px7, - sdmmc3_clk_pa6, sdmmc3_cmd_pa7, sdmmc3_dat0_pb7, sdmmc3_dat1_pb6, - sdmmc3_dat2_pb5, sdmmc3_dat3_pb4, pex_l0_rst_n_pdd1, - pex_l0_clkreq_n_pdd2, pex_wake_n_pdd3, pex_l1_rst_n_pdd5, - pex_l1_clkreq_n_pdd6, hdmi_cec_pee3, sdmmc1_wp_n_pv3, - sdmmc3_cd_n_pv2, gpio_w2_aud_pw2, gpio_w3_aud_pw3, usb_vbus_en0_pn4, - usb_vbus_en1_pn5, sdmmc3_clk_lb_out_pee4, sdmmc3_clk_lb_in_pee5, - gmi_clk_lb, reset_out_n, kb_row16_pt0, kb_row17_pt1, usb_vbus_en2_pff1, - pff2, dp_hpd_pff0, - - drive groups: - - These all support nvidia,pull-down-strength, nvidia,pull-up-strength, - nvidia,slew-rate-rising, nvidia,slew-rate-falling. Most but not all - support nvidia,high-speed-mode, nvidia,schmitt, nvidia,low-power-mode - and nvidia,drive-type. - - ao1, ao2, at1, at2, at3, at4, at5, cdev1, cdev2, dap1, dap2, dap3, dap4, - dbg, sdio3, spi, uaa, uab, uart2, uart3, sdio1, ddc, gma, gme, gmf, gmg, - gmh, owr, uda, gpv, dev3, cec, usb_vbus_en, ao3, ao0, hv0, sdio4, ao4. - - MIPI pad control groups: - - These support only the nvidia,function property. - - dsi_b - -Valid values for nvidia,functions are: - - blink, cec, cldvfs, clk12, cpu, dap, dap1, dap2, dev3, displaya, - displaya_alt, displayb, dtv, extperiph1, extperiph2, extperiph3, - gmi, gmi_alt, hda, hsi, i2c1, i2c2, i2c3, i2c4, i2cpwr, i2s0, - i2s1, i2s2, i2s3, i2s4, irda, kbc, owr, pmi, pwm0, pwm1, pwm2, pwm3, - pwron, reset_out_n, rsvd1, rsvd2, rsvd3, rsvd4, sdmmc1, sdmmc2, sdmmc3, - sdmmc4, soc, spdif, spi1, spi2, spi3, spi4, spi5, spi6, trace, uarta, - uartb, uartc, uartd, ulpi, usb, vgp1, vgp2, vgp3, vgp4, vgp5, vgp6, - vi, vi_alt1, vi_alt3, vimclk2, vimclk2_alt, sata, ccla, pe0, pe, pe1, - dp, rtck, sys, clk tmds, csi, dsi_b - -Example: - - pinmux: pinmux { - compatible = "nvidia,tegra124-pinmux"; - reg = <0x0 0x70000868 0x0 0x164>, /* Pad control registers */ - <0x0 0x70003000 0x0 0x434>, /* Mux registers */ - <0x0 0x70000820 0x0 0x8>; /* MIPI pad control */ - }; - -Example pinmux entries: - - pinctrl { - sdmmc4_default: pinmux { - sdmmc4_clk_pcc4 { - nvidia,pins = "sdmmc4_clk_pcc4", - nvidia,function = "sdmmc4"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - }; - - sdmmc4_dat0_paa0 { - nvidia,pins = "sdmmc4_dat0_paa0", - "sdmmc4_dat1_paa1", - "sdmmc4_dat2_paa2", - "sdmmc4_dat3_paa3", - "sdmmc4_dat4_paa4", - "sdmmc4_dat5_paa5", - "sdmmc4_dat6_paa6", - "sdmmc4_dat7_paa7"; - nvidia,function = "sdmmc4"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - }; - }; - }; - - sdhci@78000400 { - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc4_default>; - }; diff --git a/dts/Bindings/pinctrl/nvidia,tegra124-pinmux.yaml b/dts/Bindings/pinctrl/nvidia,tegra124-pinmux.yaml new file mode 100644 index 0000000000..9b7368bd38 --- /dev/null +++ b/dts/Bindings/pinctrl/nvidia,tegra124-pinmux.yaml @@ -0,0 +1,174 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra124-pinmux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra124 Pinmux Controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +description: The Tegra124 pinctrl binding is very similar to the Tegra20 and + Tegra30 pinctrl binding, as described in nvidia,tegra20-pinmux.yaml and + nvidia,tegra30-pinmux.yaml. In fact, this document assumes that binding as a + baseline, and only documents the differences between the two bindings. + +properties: + compatible: + oneOf: + - const: nvidia,tegra124-pinmux + - items: + - const: nvidia,tegra132-pinmux + - const: nvidia,tegra124-pinmux + + reg: + items: + - description: driver strength and pad control registers + - description: pinmux registers + - description: MIPI_PAD_CTRL registers + +patternProperties: + "^pinmux(-[a-z0-9-_]+)?$": + type: object + + # pin groups + additionalProperties: + $ref: nvidia,tegra-pinmux-common.yaml + additionalProperties: false + properties: + nvidia,pins: + $ref: /schemas/types.yaml#/definitions/string-array + items: + enum: [ ulpi_data0_po1, ulpi_data1_po2, ulpi_data2_po3, + ulpi_data3_po4, ulpi_data4_po5, ulpi_data5_po6, + ulpi_data6_po7, ulpi_data7_po0, ulpi_clk_py0, ulpi_dir_py1, + ulpi_nxt_py2, ulpi_stp_py3, dap3_fs_pp0, dap3_din_pp1, + dap3_dout_pp2, dap3_sclk_pp3, pv0, pv1, sdmmc1_clk_pz0, + sdmmc1_cmd_pz1, sdmmc1_dat3_py4, sdmmc1_dat2_py5, + sdmmc1_dat1_py6, sdmmc1_dat0_py7, clk2_out_pw5, + clk2_req_pcc5, hdmi_int_pn7, ddc_scl_pv4, ddc_sda_pv5, + uart2_rxd_pc3, uart2_txd_pc2, uart2_rts_n_pj6, + uart2_cts_n_pj5, uart3_txd_pw6, uart3_rxd_pw7, + uart3_cts_n_pa1, uart3_rts_n_pc0, pu0, pu1, pu2, pu3, pu4, + pu5, pu6, gen1_i2c_scl_pc4, gen1_i2c_sda_pc5, dap4_fs_pp4, + dap4_din_pp5, dap4_dout_pp6, dap4_sclk_pp7, clk3_out_pee0, + clk3_req_pee1, pc7, pi5, pi7, pk0, pk1, pj0, pj2, pk3, pk4, + pk2, pi3, pi6, pg0, pg1, pg2, pg3, pg4, pg5, pg6, pg7, ph0, + ph1, ph2, ph3, ph4, ph5, ph6, ph7, pj7, pb0, pb1, pk7, pi0, + pi1, pi2, pi4, gen2_i2c_scl_pt5, gen2_i2c_sda_pt6, + sdmmc4_clk_pcc4, sdmmc4_cmd_pt7, sdmmc4_dat0_paa0, + sdmmc4_dat1_paa1, sdmmc4_dat2_paa2, sdmmc4_dat3_paa3, + sdmmc4_dat4_paa4, sdmmc4_dat5_paa5, sdmmc4_dat6_paa6, + sdmmc4_dat7_paa7, cam_mclk_pcc0, pcc1, pbb0, + cam_i2c_scl_pbb1, cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6, + pbb7, pcc2, jtag_rtck, pwr_i2c_scl_pz6, pwr_i2c_sda_pz7, + kb_row0_pr0, kb_row1_pr1, kb_row2_pr2, kb_row3_pr3, + kb_row4_pr4, kb_row5_pr5, kb_row6_pr6, kb_row7_pr7, + kb_row8_ps0, kb_row9_ps1, kb_row10_ps2, kb_row11_ps3, + kb_row12_ps4, kb_row13_ps5, kb_row14_ps6, kb_row15_ps7, + kb_col0_pq0, kb_col1_pq1, kb_col2_pq2, kb_col3_pq3, + kb_col4_pq4, kb_col5_pq5, kb_col6_pq6, kb_col7_pq7, + clk_32k_out_pa0, core_pwr_req, cpu_pwr_req, pwr_int_n, + clk_32k_in, owr, dap1_fs_pn0, dap1_din_pn1, dap1_dout_pn2, + dap1_sclk_pn3, dap_mclk1_req_pee2, dap_mclk1_pw4, + spdif_in_pk6, spdif_out_pk5, dap2_fs_pa2, dap2_din_pa4, + dap2_dout_pa5, dap2_sclk_pa3, dvfs_pwm_px0, + gpio_x1_aud_px1, gpio_x3_aud_px3, dvfs_clk_px2, + gpio_x4_aud_px4, gpio_x5_aud_px5, gpio_x6_aud_px6, + gpio_x7_aud_px7, sdmmc3_clk_pa6, sdmmc3_cmd_pa7, + sdmmc3_dat0_pb7, sdmmc3_dat1_pb6, sdmmc3_dat2_pb5, + sdmmc3_dat3_pb4, pex_l0_rst_n_pdd1, pex_l0_clkreq_n_pdd2, + pex_wake_n_pdd3, pex_l1_rst_n_pdd5, pex_l1_clkreq_n_pdd6, + hdmi_cec_pee3, sdmmc1_wp_n_pv3, sdmmc3_cd_n_pv2, + gpio_w2_aud_pw2, gpio_w3_aud_pw3, usb_vbus_en0_pn4, + usb_vbus_en1_pn5, sdmmc3_clk_lb_out_pee4, + sdmmc3_clk_lb_in_pee5, gmi_clk_lb, reset_out_n, + kb_row16_pt0, kb_row17_pt1, usb_vbus_en2_pff1, pff2, + dp_hpd_pff0, + # drive groups + drive_ao1, drive_ao2, drive_at1, drive_at2, drive_at3, + drive_at4, drive_at5, drive_cdev1, drive_cdev2, drive_dap1, + drive_dap2, drive_dap3, drive_dap4, drive_dbg, drive_sdio3, + drive_spi, drive_uaa, drive_uab, drive_uart2, drive_uart3, + drive_sdio1, drive_ddc, drive_gma, drive_gme, drive_gmf, + drive_gmg, drive_gmh, drive_owr, drive_uda, drive_gpv, + drive_dev3, drive_cec, drive_usb_vbus_en, drive_ao3, + drive_ao0, drive_hv0, drive_sdio4, drive_ao4, + # MIPI pad control groups + mipi_pad_ctrl_dsi_b ] + + nvidia,function: + enum: [ blink, cec, cldvfs, clk12, cpu, dap, dap1, dap2, dev3, + displaya, displaya_alt, displayb, dtv, extperiph1, + extperiph2, extperiph3, gmi, gmi_alt, hda, hsi, i2c1, i2c2, + i2c3, i2c4, i2cpwr, i2s0, i2s1, i2s2, i2s3, i2s4, irda, kbc, + owr, pmi, pwm0, pwm1, pwm2, pwm3, pwron, reset_out_n, rsvd1, + rsvd2, rsvd3, rsvd4, sdmmc1, sdmmc2, sdmmc3, sdmmc4, soc, + spdif, spi1, spi2, spi3, spi4, spi5, spi6, trace, uarta, + uartb, uartc, uartd, ulpi, usb, vgp1, vgp2, vgp3, vgp4, vgp5, + vgp6, vi, vi_alt1, vi_alt3, vimclk2, vimclk2_alt, sata, ccla, + pe0, pe, pe1, dp, rtck, sys, clk, tmds, csi, dsi_b ] + + nvidia,pull: true + nvidia,tristate: true + nvidia,schmitt: true + nvidia,pull-down-strength: true + nvidia,pull-up-strength: true + nvidia,high-speed-mode: true + nvidia,low-power-mode: true + nvidia,enable-input: true + nvidia,open-drain: true + nvidia,lock: true + nvidia,io-reset: true + nvidia,rcv-sel: true + nvidia,drive-type: true + nvidia,slew-rate-rising: true + nvidia,slew-rate-falling: true + + required: + - nvidia,pins + +additionalProperties: false + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/clock/tegra124-car.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/pinctrl/pinctrl-tegra.h> + + pinmux@70000868 { + compatible = "nvidia,tegra124-pinmux"; + reg = <0x70000868 0x164>, /* Pad control registers */ + <0x70003000 0x434>, /* Mux registers */ + <0x70000820 0x8>; /* MIPI pad control */ + + sdmmc4_default: pinmux { + sdmmc4_clk_pcc4 { + nvidia,pins = "sdmmc4_clk_pcc4"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + sdmmc4_dat0_paa0 { + nvidia,pins = "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + }; + }; +... diff --git a/dts/Bindings/pinctrl/nvidia,tegra194-pinmux.txt b/dts/Bindings/pinctrl/nvidia,tegra194-pinmux.txt deleted file mode 100644 index 90d38f7106..0000000000 --- a/dts/Bindings/pinctrl/nvidia,tegra194-pinmux.txt +++ /dev/null @@ -1,107 +0,0 @@ -NVIDIA Tegra194 pinmux controller - -Required properties: -- compatible: "nvidia,tegra194-pinmux" -- reg: Should contain a list of base address and size pairs for: - - first entry: The APB_MISC_GP_*_PADCTRL registers (pad control) - - second entry: The PINMUX_AUX_* registers (pinmux) - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -Tegra's pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, tristate, drive strength, etc. - -See the TRM to determine which properties and values apply to each pin/group. -Macro values for property values are defined in -include/dt-binding/pinctrl/pinctrl-tegra.h. - -Required subnode-properties: -- nvidia,pins : An array of strings. Each string contains the name of a pin or - group. Valid values for these names are listed below. - -Optional subnode-properties: -- nvidia,function: A string containing the name of the function to mux to the - pin or group. -- nvidia,pull: Integer, representing the pull-down/up to apply to the pin. - 0: none, 1: down, 2: up. -- nvidia,tristate: Integer. - 0: drive, 1: tristate. -- nvidia,enable-input: Integer. Enable the pin's input path. - enable :TEGRA_PIN_ENABLE and - disable or output only: TEGRA_PIN_DISABLE. -- nvidia,open-drain: Integer. - enable: TEGRA_PIN_ENABLE. - disable: TEGRA_PIN_DISABLE. -- nvidia,lock: Integer. Lock the pin configuration against further changes - until reset. - enable: TEGRA_PIN_ENABLE. - disable: TEGRA_PIN_DISABLE. -- nvidia,io-hv: Integer. Select high-voltage receivers. - normal: TEGRA_PIN_DISABLE - high: TEGRA_PIN_ENABLE -- nvidia,schmitt: Integer. Enables Schmitt Trigger on the input. - normal: TEGRA_PIN_DISABLE - high: TEGRA_PIN_ENABLE -- nvidia,drive-type: Integer. Valid range 0...3. -- nvidia,pull-down-strength: Integer. Controls drive strength. 0 is weakest. - The range of valid values depends on the pingroup. See "CAL_DRVDN" in the - Tegra TRM. -- nvidia,pull-up-strength: Integer. Controls drive strength. 0 is weakest. - The range of valid values depends on the pingroup. See "CAL_DRVUP" in the - Tegra TRM. - -Valid values for pin and group names (nvidia,pin) are: - - These correspond to Tegra PADCTL_* (pinmux) registers. - - Mux groups: - - These correspond to Tegra PADCTL_* (pinmux) registers. Any property - that exists in those registers may be set for the following pin names. - - pex_l5_clkreq_n_pgg0, pex_l5_rst_n_pgg1 - - Drive groups: - - These registers controls a single pin for which a mux group exists. - See the list above for the pin name to use when configuring the pinmux. - - pex_l5_clkreq_n_pgg0, pex_l5_rst_n_pgg1 - -Valid values for nvidia,functions are: - - pe5 - -Power Domain: - pex_l5_clkreq_n_pgg0 and pex_l5_rst_n_pgg1 are part of PCIE C5 power - partition. Client devices must enable this partition before accessing - these pins here. - - -Example: - - tegra_pinctrl: pinmux: pinmux@2430000 { - compatible = "nvidia,tegra194-pinmux"; - reg = <0x2430000 0x17000 - 0xc300000 0x4000>; - - pinctrl-names = "pex_rst"; - pinctrl-0 = <&pex_rst_c5_out_state>; - - pex_rst_c5_out_state: pex_rst_c5_out { - pex_rst { - nvidia,pins = "pex_l5_rst_n_pgg1"; - nvidia,schmitt = <TEGRA_PIN_DISABLE>; - nvidia,lpdr = <TEGRA_PIN_ENABLE>; - nvidia,enable-input = <TEGRA_PIN_DISABLE>; - nvidia,io-hv = <TEGRA_PIN_ENABLE>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; - }; - }; - }; diff --git a/dts/Bindings/pinctrl/nvidia,tegra194-pinmux.yaml b/dts/Bindings/pinctrl/nvidia,tegra194-pinmux.yaml new file mode 100644 index 0000000000..87b6f4f42f --- /dev/null +++ b/dts/Bindings/pinctrl/nvidia,tegra194-pinmux.yaml @@ -0,0 +1,282 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra194-pinmux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra194 Pinmux Controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + compatible: + enum: + - nvidia,tegra194-pinmux + - nvidia,tegra194-pinmux-aon + + reg: + items: + - description: pinmux registers + +patternProperties: + "^pinmux(-[a-z0-9-_]+)?$": + type: object + + # pin groups + additionalProperties: + $ref: nvidia,tegra-pinmux-common.yaml + unevaluatedProperties: false + properties: + nvidia,function: + enum: [ aud, can0, can1, ccla, dca, dcb, dgpu, directdc, directdc1, + displaya, displayb, dmic1, dmic2, dmic3, dmic4, dmic5, dp, + dspk0, dspk1, eqos, extperiph1, extperiph2, extperiph3, + extperiph4, gp, gpio, hdmi, i2c1, i2c2, i2c3, i2c5, i2c8, + i2s1, i2s2, i2s3, i2s4, i2s5, i2s6, igpu, iqc1, iqc2, mipi, + nv, pe0, pe1, pe2, pe3, pe4, pe5, qspi, qspi0, qspi1, rsvd0, + rsvd1, rsvd2, rsvd3, sata, sce, sdmmc1, sdmmc3, sdmmc4, slvs, + soc, spdif, spi1, spi2, spi3, touch, uarta, uartb, uartc, + uartd, uarte, uartg, ufs0, usb, vgp1, vgp2, vgp3, vgp4, vgp5, + vgp6, wdt ] + + nvidia,pull: true + nvidia,tristate: true + nvidia,schmitt: true + nvidia,enable-input: true + nvidia,open-drain: true + nvidia,lock: true + nvidia,drive-type: true + nvidia,io-hv: true + + required: + - nvidia,pins + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + const: nvidia,tegra194-pinmux + then: + patternProperties: + "^pinmux(-[a-z0-9-_]+)?$": + type: object + additionalProperties: + properties: + nvidia,pins: + description: An array of strings. Each string contains the name + of a pin or group. Valid values for these names are listed + below. + + Note that the pex_l5_clkreq_n_pgg0 and pex_l5_rst_n_pgg1 pins + are part of PCIE C5 power partition. Client devices must + enable this partition before accessing the configuration for + these pins. + items: + enum: [ dap6_sclk_pa0, dap6_dout_pa1, dap6_din_pa2, + dap6_fs_pa3, dap4_sclk_pa4, dap4_dout_pa5, + dap4_din_pa6, dap4_fs_pa7, cpu_pwr_req_0_pb0, + cpu_pwr_req_1_pb1, qspi0_sck_pc0, qspi0_cs_n_pc1, + qspi0_io0_pc2, qspi0_io1_pc3, qspi0_io2_pc4, + qspi0_io3_pc5, qspi1_sck_pc6, qspi1_cs_n_pc7, + qspi1_io0_pd0, qspi1_io1_pd1, qspi1_io2_pd2, + qspi1_io3_pd3, eqos_txc_pe0, eqos_td0_pe1, + eqos_td1_pe2, eqos_td2_pe3, eqos_td3_pe4, + eqos_tx_ctl_pe5, eqos_rd0_pe6, eqos_rd1_pe7, + eqos_rd2_pf0, eqos_rd3_pf1, eqos_rx_ctl_pf2, + eqos_rxc_pf3, eqos_sma_mdio_pf4, eqos_sma_mdc_pf5, + soc_gpio00_pg0, soc_gpio01_pg1, soc_gpio02_pg2, + soc_gpio03_pg3, soc_gpio08_pg4, soc_gpio09_pg5, + soc_gpio10_pg6, soc_gpio11_pg7, soc_gpio12_ph0, + soc_gpio13_ph1, soc_gpio14_ph2, uart4_tx_ph3, + uart4_rx_ph4, uart4_rts_ph5, uart4_cts_ph6, + dap2_sclk_ph7, dap2_dout_pi0, dap2_din_pi1, + dap2_fs_pi2, gen1_i2c_scl_pi3, gen1_i2c_sda_pi4, + sdmmc1_clk_pj0, sdmmc1_cmd_pj1, sdmmc1_dat0_pj2, + sdmmc1_dat1_pj3, sdmmc1_dat2_pj4, sdmmc1_dat3_pj5, + pex_l0_clkreq_n_pk0, pex_l0_rst_n_pk1, + pex_l1_clkreq_n_pk2, pex_l1_rst_n_pk3, + pex_l2_clkreq_n_pk4, pex_l2_rst_n_pk5, + pex_l3_clkreq_n_pk6, pex_l3_rst_n_pk7, + pex_l4_clkreq_n_pl0, pex_l4_rst_n_pl1, + pex_wake_n_pl2, sata_dev_slp_pl3, dp_aux_ch0_hpd_pm0, + dp_aux_ch1_hpd_pm1, dp_aux_ch2_hpd_pm2, + dp_aux_ch3_hpd_pm3, hdmi_cec_pm4, soc_gpio50_pm5, + soc_gpio51_pm6, soc_gpio52_pm7, soc_gpio53_pn0, + soc_gpio54_pn1, soc_gpio55_pn2, sdmmc3_clk_po0, + sdmmc3_cmd_po1, sdmmc3_dat0_po2, sdmmc3_dat1_po3, + sdmmc3_dat2_po4, sdmmc3_dat3_po5, extperiph1_clk_pp0, + extperiph2_clk_pp1, cam_i2c_scl_pp2, cam_i2c_sda_pp3, + soc_gpio04_pp4, soc_gpio05_pp5, soc_gpio06_pp6, + soc_gpio07_pp7, soc_gpio20_pq0, soc_gpio21_pq1, + soc_gpio22_pq2, soc_gpio23_pq3, soc_gpio40_pq4, + soc_gpio41_pq5, soc_gpio42_pq6, soc_gpio43_pq7, + soc_gpio44_pr0, soc_gpio45_pr1, uart1_tx_pr2, + uart1_rx_pr3, uart1_rts_pr4, uart1_cts_pr5, + dap1_sclk_ps0, dap1_dout_ps1, dap1_din_ps2, + dap1_fs_ps3, aud_mclk_ps4, soc_gpio30_ps5, + soc_gpio31_ps6, soc_gpio32_ps7, soc_gpio33_pt0, + dap3_sclk_pt1, dap3_dout_pt2, dap3_din_pt3, + dap3_fs_pt4, dap5_sclk_pt5, dap5_dout_pt6, + dap5_din_pt7, dap5_fs_pu0, directdc1_clk_pv0, + directdc1_in_pv1, directdc1_out0_pv2, + directdc1_out1_pv3, directdc1_out2_pv4, + directdc1_out3_pv5, directdc1_out4_pv6, + directdc1_out5_pv7, directdc1_out6_pw0, + directdc1_out7_pw1, gpu_pwr_req_px0, cv_pwr_req_px1, + gp_pwm2_px2, gp_pwm3_px3, uart2_tx_px4, uart2_rx_px5, + uart2_rts_px6, uart2_cts_px7, spi3_sck_py0, + spi3_miso_py1, spi3_mosi_py2, spi3_cs0_py3, + spi3_cs1_py4, uart5_tx_py5, uart5_rx_py6, + uart5_rts_py7, uart5_cts_pz0, usb_vbus_en0_pz1, + usb_vbus_en1_pz2, spi1_sck_pz3, spi1_miso_pz4, + spi1_mosi_pz5, spi1_cs0_pz6, spi1_cs1_pz7, + ufs0_ref_clk_pff0, ufs0_rst_pff1, + pex_l5_clkreq_n_pgg0, pex_l5_rst_n_pgg1, + directdc_comp, sdmmc4_clk, sdmmc4_cmd, sdmmc4_dqs, + sdmmc4_dat7, sdmmc4_dat6, sdmmc4_dat5, sdmmc4_dat4, + sdmmc4_dat3, sdmmc4_dat2, sdmmc4_dat1, sdmmc4_dat0, + sdmmc1_comp, sdmmc1_hv_trim, sdmmc3_comp, + sdmmc3_hv_trim, eqos_comp, qspi_comp, + # drive groups + drive_soc_gpio33_pt0, drive_soc_gpio32_ps7, + drive_soc_gpio31_ps6, drive_soc_gpio30_ps5, + drive_aud_mclk_ps4, drive_dap1_fs_ps3, + drive_dap1_din_ps2, drive_dap1_dout_ps1, + drive_dap1_sclk_ps0, drive_dap3_fs_pt4, + drive_dap3_din_pt3, drive_dap3_dout_pt2, + drive_dap3_sclk_pt1, drive_dap5_fs_pu0, + drive_dap5_din_pt7, drive_dap5_dout_pt6, + drive_dap5_sclk_pt5, drive_dap6_fs_pa3, + drive_dap6_din_pa2, drive_dap6_dout_pa1, + drive_dap6_sclk_pa0, drive_dap4_fs_pa7, + drive_dap4_din_pa6, drive_dap4_dout_pa5, + drive_dap4_sclk_pa4, drive_extperiph2_clk_pp1, + drive_extperiph1_clk_pp0, drive_cam_i2c_sda_pp3, + drive_cam_i2c_scl_pp2, drive_soc_gpio40_pq4, + drive_soc_gpio41_pq5, drive_soc_gpio42_pq6, + drive_soc_gpio43_pq7, drive_soc_gpio44_pr0, + drive_soc_gpio45_pr1, drive_soc_gpio20_pq0, + drive_soc_gpio21_pq1, drive_soc_gpio22_pq2, + drive_soc_gpio23_pq3, drive_soc_gpio04_pp4, + drive_soc_gpio05_pp5, drive_soc_gpio06_pp6, + drive_soc_gpio07_pp7, drive_uart1_cts_pr5, + drive_uart1_rts_pr4, drive_uart1_rx_pr3, + drive_uart1_tx_pr2, drive_dap2_din_pi1, + drive_dap2_dout_pi0, drive_dap2_fs_pi2, + drive_dap2_sclk_ph7, drive_uart4_cts_ph6, + drive_uart4_rts_ph5, drive_uart4_rx_ph4, + drive_uart4_tx_ph3, drive_soc_gpio03_pg3, + drive_soc_gpio02_pg2, drive_soc_gpio01_pg1, + drive_soc_gpio00_pg0, drive_gen1_i2c_scl_pi3, + drive_gen1_i2c_sda_pi4, drive_soc_gpio08_pg4, + drive_soc_gpio09_pg5, drive_soc_gpio10_pg6, + drive_soc_gpio11_pg7, drive_soc_gpio12_ph0, + drive_soc_gpio13_ph1, drive_soc_gpio14_ph2, + drive_soc_gpio50_pm5, drive_soc_gpio51_pm6, + drive_soc_gpio52_pm7, drive_soc_gpio53_pn0, + drive_soc_gpio54_pn1, drive_soc_gpio55_pn2, + drive_dp_aux_ch0_hpd_pm0, drive_dp_aux_ch1_hpd_pm1, + drive_dp_aux_ch2_hpd_pm2, drive_dp_aux_ch3_hpd_pm3, + drive_hdmi_cec_pm4, drive_pex_l2_clkreq_n_pk4, + drive_pex_wake_n_pl2, drive_pex_l1_clkreq_n_pk2, + drive_pex_l1_rst_n_pk3, drive_pex_l0_clkreq_n_pk0, + drive_pex_l0_rst_n_pk1, drive_pex_l2_rst_n_pk5, + drive_pex_l3_clkreq_n_pk6, drive_pex_l3_rst_n_pk7, + drive_pex_l4_clkreq_n_pl0, drive_pex_l4_rst_n_pl1, + drive_sata_dev_slp_pl3, drive_pex_l5_clkreq_n_pgg0, + drive_pex_l5_rst_n_pgg1, drive_cpu_pwr_req_1_pb1, + drive_cpu_pwr_req_0_pb0, drive_sdmmc1_clk_pj0, + drive_sdmmc1_cmd_pj1, drive_sdmmc1_dat3_pj5, + drive_sdmmc1_dat2_pj4, drive_sdmmc1_dat1_pj3, + drive_sdmmc1_dat0_pj2, drive_sdmmc3_dat3_po5, + drive_sdmmc3_dat2_po4, drive_sdmmc3_dat1_po3, + drive_sdmmc3_dat0_po2, drive_sdmmc3_cmd_po1, + drive_sdmmc3_clk_po0, drive_gpu_pwr_req_px0, + drive_spi3_miso_py1, drive_spi1_cs0_pz6, + drive_spi3_cs0_py3, drive_spi1_miso_pz4, + drive_spi3_cs1_py4, drive_gp_pwm3_px3, + drive_gp_pwm2_px2, drive_spi1_sck_pz3, + drive_spi3_sck_py0, drive_spi1_cs1_pz7, + drive_spi1_mosi_pz5, drive_spi3_mosi_py2, + drive_cv_pwr_req_px1, drive_uart2_tx_px4, + drive_uart2_rx_px5, drive_uart2_rts_px6, + drive_uart2_cts_px7, drive_uart5_rx_py6, + drive_uart5_tx_py5, drive_uart5_rts_py7, + drive_uart5_cts_pz0, drive_usb_vbus_en0_pz1, + drive_usb_vbus_en1_pz2, drive_ufs0_rst_pff1, + drive_ufs0_ref_clk_pff0 ] + + - if: + properties: + compatible: + const: nvidia,tegra194-pinmux-aon + then: + patternProperties: + "^pinmux(-[a-z0-9-_]+)?$": + type: object + additionalProperties: + properties: + nvidia,pins: + items: + enum: [ can1_dout_paa0, can1_din_paa1, can0_dout_paa2, + can0_din_paa3, can0_stb_paa4, can0_en_paa5, + can0_wake_paa6, can0_err_paa7, can1_stb_pbb0, + can1_en_pbb1, can1_wake_pbb2, can1_err_pbb3, + spi2_sck_pcc0, spi2_miso_pcc1, spi2_mosi_pcc2, + spi2_cs0_pcc3, touch_clk_pcc4, uart3_tx_pcc5, + uart3_rx_pcc6, gen2_i2c_scl_pcc7, gen2_i2c_sda_pdd0, + gen8_i2c_scl_pdd1, gen8_i2c_sda_pdd2, + safe_state_pee0, vcomp_alert_pee1, + ao_retention_n_pee2, batt_oc_pee3, power_on_pee4, + pwr_i2c_scl_pee5, pwr_i2c_sda_pee6, sys_reset_n, + shutdown_n, pmu_int_n, soc_pwr_req, clk_32k_in, + # drive groups + drive_shutdown_n, drive_pmu_int_n, + drive_safe_state_pee0, drive_vcomp_alert_pee1, + drive_soc_pwr_req, drive_batt_oc_pee3, + drive_clk_32k_in, drive_power_on_pee4, + drive_pwr_i2c_scl_pee5, drive_pwr_i2c_sda_pee6, + drive_ao_retention_n_pee2, drive_touch_clk_pcc4, + drive_uart3_rx_pcc6, drive_uart3_tx_pcc5, + drive_gen8_i2c_sda_pdd2, drive_gen8_i2c_scl_pdd1, + drive_spi2_mosi_pcc2, drive_gen2_i2c_scl_pcc7, + drive_spi2_cs0_pcc3, drive_gen2_i2c_sda_pdd0, + drive_spi2_sck_pcc0, drive_spi2_miso_pcc1, + drive_can1_dout_paa0, drive_can1_din_paa1, + drive_can0_dout_paa2, drive_can0_din_paa3, + drive_can0_stb_paa4, drive_can0_en_paa5, + drive_can0_wake_paa6, drive_can0_err_paa7, + drive_can1_stb_pbb0, drive_can1_en_pbb1, + drive_can1_wake_pbb2, drive_can1_err_pbb3 ] + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/pinctrl/pinctrl-tegra.h> + + pinmux@2430000 { + compatible = "nvidia,tegra194-pinmux"; + reg = <0x2430000 0x17000>; + + pinctrl-names = "pex_rst"; + pinctrl-0 = <&pex_rst_c5_out_state>; + + pex_rst_c5_out_state: pinmux-pex-rst-c5-out { + pex_rst { + nvidia,pins = "pex_l5_rst_n_pgg1"; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_ENABLE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + }; + }; + }; +... diff --git a/dts/Bindings/pinctrl/nvidia,tegra20-pinmux.txt b/dts/Bindings/pinctrl/nvidia,tegra20-pinmux.txt deleted file mode 100644 index 3c8ce28baa..0000000000 --- a/dts/Bindings/pinctrl/nvidia,tegra20-pinmux.txt +++ /dev/null @@ -1,143 +0,0 @@ -NVIDIA Tegra20 pinmux controller - -Required properties: -- compatible: "nvidia,tegra20-pinmux" -- reg: Should contain the register physical address and length for each of - the tri-state, mux, pull-up/down, and pad control register sets. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -Tegra's pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, tristate, drive strength, etc. - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function or tristate parameter. For this -reason, even seemingly boolean values are actually tristates in this binding: -unspecified, off, or on. Unspecified is represented as an absent property, -and off/on are represented as integer values 0 and 1. - -Required subnode-properties: -- nvidia,pins : An array of strings. Each string contains the name of a pin or - group. Valid values for these names are listed below. - -Optional subnode-properties: -- nvidia,function: A string containing the name of the function to mux to the - pin or group. Valid values for function names are listed below. See the Tegra - TRM to determine which are valid for each pin or group. -- nvidia,pull: Integer, representing the pull-down/up to apply to the pin. - 0: none, 1: down, 2: up. -- nvidia,tristate: Integer. - 0: drive, 1: tristate. -- nvidia,high-speed-mode: Integer. Enable high speed mode the pins. - 0: no, 1: yes. -- nvidia,schmitt: Integer. Enables Schmitt Trigger on the input. - 0: no, 1: yes. -- nvidia,low-power-mode: Integer. Valid values 0-3. 0 is least power, 3 is - most power. Controls the drive power or current. See "Low Power Mode" - or "LPMD1" and "LPMD0" in the Tegra TRM. -- nvidia,pull-down-strength: Integer. Controls drive strength. 0 is weakest. - The range of valid values depends on the pingroup. See "CAL_DRVDN" in the - Tegra TRM. -- nvidia,pull-up-strength: Integer. Controls drive strength. 0 is weakest. - The range of valid values depends on the pingroup. See "CAL_DRVUP" in the - Tegra TRM. -- nvidia,slew-rate-rising: Integer. Controls rising signal slew rate. 0 is - fastest. The range of valid values depends on the pingroup. See - "DRVDN_SLWR" in the Tegra TRM. -- nvidia,slew-rate-falling: Integer. Controls falling signal slew rate. 0 is - fastest. The range of valid values depends on the pingroup. See - "DRVUP_SLWF" in the Tegra TRM. - -Note that many of these properties are only valid for certain specific pins -or groups. See the Tegra TRM and various pinmux spreadsheets for complete -details regarding which groups support which functionality. The Linux pinctrl -driver may also be a useful reference, since it consolidates, disambiguates, -and corrects data from all those sources. - -Valid values for pin and group names are: - - mux groups: - - These all support nvidia,function, nvidia,tristate, and many support - nvidia,pull. - - ata, atb, atc, atd, ate, cdev1, cdev2, crtp, csus, dap1, dap2, dap3, dap4, - ddc, dta, dtb, dtc, dtd, dte, dtf, gma, gmb, gmc, gmd, gme, gpu, gpu7, - gpv, hdint, i2cp, irrx, irtx, kbca, kbcb, kbcc, kbcd, kbce, kbcf, lcsn, - ld0, ld1, ld2, ld3, ld4, ld5, ld6, ld7, ld8, ld9, ld10, ld11, ld12, ld13, - ld14, ld15, ld16, ld17, ldc, ldi, lhp0, lhp1, lhp2, lhs, lm0, lm1, lpp, - lpw0, lpw1, lpw2, lsc0, lsc1, lsck, lsda, lsdi, lspi, lvp0, lvp1, lvs, - owc, pmc, pta, rm, sdb, sdc, sdd, sdio1, slxa, slxc, slxd, slxk, spdi, - spdo, spia, spib, spic, spid, spie, spif, spig, spih, uaa, uab, uac, uad, - uca, ucb, uda. - - tristate groups: - - These only support nvidia,pull. - - ck32, ddrc, pmca, pmcb, pmcc, pmcd, pmce, xm2c, xm2d, ls, lc, ld17_0, - ld19_18, ld21_20, ld23_22. - - drive groups: - - With some exceptions, these support nvidia,high-speed-mode, - nvidia,schmitt, nvidia,low-power-mode, nvidia,pull-down-strength, - nvidia,pull-up-strength, nvidia,slew-rate-rising, nvidia,slew-rate-falling. - - drive_ao1, drive_ao2, drive_at1, drive_at2, drive_cdev1, drive_cdev2, - drive_csus, drive_dap1, drive_dap2, drive_dap3, drive_dap4, drive_dbg, - drive_lcd1, drive_lcd2, drive_sdmmc2, drive_sdmmc3, drive_spi, drive_uaa, - drive_uab, drive_uart2, drive_uart3, drive_vi1, drive_vi2, drive_xm2a, - drive_xm2c, drive_xm2d, drive_xm2clk, drive_sdio1, drive_crt, drive_ddc, - drive_gma, drive_gmb, drive_gmc, drive_gmd, drive_gme, drive_owr, - drive_uda. - -Valid values for nvidia,functions are: - - ahb_clk, apb_clk, audio_sync, crt, dap1, dap2, dap3, dap4, dap5, - displaya, displayb, emc_test0_dll, emc_test1_dll, gmi, gmi_int, - hdmi, i2cp, i2c1, i2c2, i2c3, ide, irda, kbc, mio, mipi_hs, nand, - osc, owr, pcie, plla_out, pllc_out1, pllm_out1, pllp_out2, pllp_out3, - pllp_out4, pwm, pwr_intr, pwr_on, rsvd1, rsvd2, rsvd3, rsvd4, rtck, - sdio1, sdio2, sdio3, sdio4, sflash, spdif, spi1, spi2, spi2_alt, - spi3, spi4, trace, twc, uarta, uartb, uartc, uartd, uarte, ulpi, - vi, vi_sensor_clk, xio - -Example: - - pinctrl@70000000 { - compatible = "nvidia,tegra20-pinmux"; - reg = < 0x70000014 0x10 /* Tri-state registers */ - 0x70000080 0x20 /* Mux registers */ - 0x700000a0 0x14 /* Pull-up/down registers */ - 0x70000868 0xa8 >; /* Pad control registers */ - }; - -Example board file extract: - - pinctrl@70000000 { - sdio4_default: sdio4_default { - atb { - nvidia,pins = "atb", "gma", "gme"; - nvidia,function = "sdio4"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - }; - }; - }; - - sdhci@c8000600 { - pinctrl-names = "default"; - pinctrl-0 = <&sdio4_default>; - }; diff --git a/dts/Bindings/pinctrl/nvidia,tegra20-pinmux.yaml b/dts/Bindings/pinctrl/nvidia,tegra20-pinmux.yaml new file mode 100644 index 0000000000..63cd743a30 --- /dev/null +++ b/dts/Bindings/pinctrl/nvidia,tegra20-pinmux.yaml @@ -0,0 +1,110 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra20-pinmux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra20 Pinmux Controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + compatible: + const: nvidia,tegra20-pinmux + + reg: + items: + - description: tri-state registers + - description: mux register + - description: pull-up/down registers + - description: pad control registers + +patternProperties: + "^pinmux(-[a-z0-9-_]+)?$": + type: object + + # pin groups + additionalProperties: + $ref: nvidia,tegra-pinmux-common.yaml + additionalProperties: false + properties: + nvidia,pins: + items: + enum: [ ata, atb, atc, atd, ate, cdev1, cdev2, crtp, csus, dap1, + dap2, dap3, dap4, ddc, dta, dtb, dtc, dtd, dte, dtf, gma, + gmb, gmc, gmd, gme, gpu, gpu7, gpv, hdint, i2cp, irrx, + irtx, kbca, kbcb, kbcc, kbcd, kbce, kbcf, lcsn, ld0, ld1, + ld2, ld3, ld4, ld5, ld6, ld7, ld8, ld9, ld10, ld11, ld12, + ld13, ld14, ld15, ld16, ld17, ldc, ldi, lhp0, lhp1, lhp2, + lhs, lm0, lm1, lpp, lpw0, lpw1, lpw2, lsc0, lsc1, lsck, + lsda, lsdi, lspi, lvp0, lvp1, lvs, owc, pmc, pta, rm, sdb, + sdc, sdd, sdio1, slxa, slxc, slxd, slxk, spdi, spdo, spia, + spib, spic, spid, spie, spif, spig, spih, uaa, uab, uac, + uad, uca, ucb, uda, + # tristate groups + ck32, ddrc, pmca, pmcb, pmcc, pmcd, pmce, xm2c, xm2d, ls, + lc, ld17_0, ld19_18, ld21_20, ld23_22, + # drive groups + drive_ao1, drive_ao2, drive_at1, drive_at2, drive_cdev1, + drive_cdev2, drive_csus, drive_dap1, drive_dap2, + drive_dap3, drive_dap4, drive_dbg, drive_lcd1, drive_lcd2, + drive_sdmmc2, drive_sdmmc3, drive_spi, drive_uaa, + drive_uab, drive_uart2, drive_uart3, drive_vi1, drive_vi2, + drive_xm2a, drive_xm2c, drive_xm2d, drive_xm2clk, + drive_sdio1, drive_crt, drive_ddc, drive_gma, drive_gmb, + drive_gmc, drive_gmd, drive_gme, drive_owr, drive_uda ] + + nvidia,function: + enum: [ ahb_clk, apb_clk, audio_sync, crt, dap1, dap2, dap3, dap4, + dap5, displaya, displayb, emc_test0_dll, emc_test1_dll, gmi, + gmi_int, hdmi, i2cp, i2c1, i2c2, i2c3, ide, irda, kbc, mio, + mipi_hs, nand, osc, owr, pcie, plla_out, pllc_out1, + pllm_out1, pllp_out2, pllp_out3, pllp_out4, pwm, pwr_intr, + pwr_on, rsvd1, rsvd2, rsvd3, rsvd4, rtck, sdio1, sdio2, + sdio3, sdio4, sflash, spdif, spi1, spi2, spi2_alt, spi3, + spi4, trace, twc, uarta, uartb, uartc, uartd, uarte, ulpi, + vi, vi_sensor_clk, xio ] + + nvidia,pull: true + nvidia,tristate: true + nvidia,schmitt: true + nvidia,pull-down-strength: true + nvidia,pull-up-strength: true + nvidia,high-speed-mode: true + nvidia,low-power-mode: true + nvidia,slew-rate-rising: true + nvidia,slew-rate-falling: true + + required: + - nvidia,pins + +additionalProperties: false + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/clock/tegra20-car.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + pinctrl@70000000 { + compatible = "nvidia,tegra20-pinmux"; + reg = <0x70000014 0x10>, /* Tri-state registers */ + <0x70000080 0x20>, /* Mux registers */ + <0x700000a0 0x14>, /* Pull-up/down registers */ + <0x70000868 0xa8>; /* Pad control registers */ + + pinmux { + atb { + nvidia,pins = "atb", "gma", "gme"; + nvidia,function = "sdio4"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + }; + }; +... diff --git a/dts/Bindings/pinctrl/nvidia,tegra210-pinmux.txt b/dts/Bindings/pinctrl/nvidia,tegra210-pinmux.txt deleted file mode 100644 index 85f211436b..0000000000 --- a/dts/Bindings/pinctrl/nvidia,tegra210-pinmux.txt +++ /dev/null @@ -1,166 +0,0 @@ -NVIDIA Tegra210 pinmux controller - -Required properties: -- compatible: "nvidia,tegra210-pinmux" -- reg: Should contain a list of base address and size pairs for: - - first entry: The APB_MISC_GP_*_PADCTRL registers (pad control) - - second entry: The PINMUX_AUX_* registers (pinmux) - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -Tegra's pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, tristate, drive strength, etc. - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function or tristate parameter. For this -reason, even seemingly boolean values are actually tristates in this binding: -unspecified, off, or on. Unspecified is represented as an absent property, -and off/on are represented as integer values 0 and 1. - -See the TRM to determine which properties and values apply to each pin/group. -Macro values for property values are defined in -include/dt-binding/pinctrl/pinctrl-tegra.h. - -Required subnode-properties: -- nvidia,pins : An array of strings. Each string contains the name of a pin or - group. Valid values for these names are listed below. - -Optional subnode-properties: -- nvidia,function: A string containing the name of the function to mux to the - pin or group. -- nvidia,pull: Integer, representing the pull-down/up to apply to the pin. - 0: none, 1: down, 2: up. -- nvidia,tristate: Integer. - 0: drive, 1: tristate. -- nvidia,enable-input: Integer. Enable the pin's input path. - enable :TEGRA_PIN_ENABLE and - disable or output only: TEGRA_PIN_DISABLE. -- nvidia,open-drain: Integer. - enable: TEGRA_PIN_ENABLE. - disable: TEGRA_PIN_DISABLE. -- nvidia,lock: Integer. Lock the pin configuration against further changes - until reset. - enable: TEGRA_PIN_ENABLE. - disable: TEGRA_PIN_DISABLE. -- nvidia,io-hv: Integer. Select high-voltage receivers. - normal: TEGRA_PIN_DISABLE - high: TEGRA_PIN_ENABLE -- nvidia,high-speed-mode: Integer. Enable high speed mode the pins. - normal: TEGRA_PIN_DISABLE - high: TEGRA_PIN_ENABLE -- nvidia,schmitt: Integer. Enables Schmitt Trigger on the input. - normal: TEGRA_PIN_DISABLE - high: TEGRA_PIN_ENABLE -- nvidia,drive-type: Integer. Valid range 0...3. -- nvidia,pull-down-strength: Integer. Controls drive strength. 0 is weakest. - The range of valid values depends on the pingroup. See "CAL_DRVDN" in the - Tegra TRM. -- nvidia,pull-up-strength: Integer. Controls drive strength. 0 is weakest. - The range of valid values depends on the pingroup. See "CAL_DRVUP" in the - Tegra TRM. -- nvidia,slew-rate-rising: Integer. Controls rising signal slew rate. 0 is - fastest. The range of valid values depends on the pingroup. See - "DRVDN_SLWR" in the Tegra TRM. -- nvidia,slew-rate-falling: Integer. Controls falling signal slew rate. 0 is - fastest. The range of valid values depends on the pingroup. See - "DRVUP_SLWF" in the Tegra TRM. - -Valid values for pin and group names (nvidia,pin) are: - - Mux groups: - - These correspond to Tegra PINMUX_AUX_* (pinmux) registers. Any property - that exists in those registers may be set for the following pin names. - - In Tegra210, many pins also have a dedicated APB_MISC_GP_*_PADCTRL - register. Where that is true, and property that exists in that register - may also be set on the following pin names. - - als_prox_int_px3, ap_ready_pv5, ap_wake_bt_ph3, ap_wake_nfc_ph7, - aud_mclk_pbb0, batt_bcl, bt_rst_ph4, bt_wake_ap_ph5, button_home_py1, - button_power_on_px5, button_slide_sw_py0, button_vol_down_px7, - button_vol_up_px6, cam1_mclk_ps0, cam1_pwdn_ps7, cam1_strobe_pt1, - cam2_mclk_ps1, cam2_pwdn_pt0, cam_af_en_ps5, cam_flash_en_ps6, - cam_i2c_scl_ps2, cam_i2c_sda_ps3, cam_rst_ps4cam_rst_ps4, clk_32k_in, - clk_32k_out_py5, clk_req, core_pwr_req, cpu_pwr_req, dap1_din_pb1, - dap1_dout_pb2, dap1_fs_pb0, dap1_sclk_pb3, dap2_din_paa2, dap2_dout_paa3, - dap2_fs_paa0, dap2_sclk_paa1, dap4_din_pj5, dap4_dout_pj6, dap4_fs_pj4, - dap4_sclk_pj7, dmic1_clk_pe0, dmic1_dat_pe1, dmic2_clk_pe2, dmic2_dat_pe3, - dmic3_clk_pe4, dmic3_dat_pe5, dp_hpd0_pcc6, dvfs_clk_pbb2, dvfs_pwm_pbb1, - gen1_i2c_scl_pj1, gen1_i2c_sda_pj0, gen2_i2c_scl_pj2, gen2_i2c_sda_pj3, - gen3_i2c_scl_pf0, gen3_i2c_sda_pf1, gpio_x1_aud_pbb3, gpio_x3_aud_pbb4, - gps_en_pi2, gps_rst_pi3, hdmi_cec_pcc0, hdmi_int_dp_hpd_pcc1, jtag_rtck, - lcd_bl_en_pv1, lcd_bl_pwm_pv0, lcd_gpio1_pv3, lcd_gpio2_pv4, lcd_rst_pv2, - lcd_te_py2, modem_wake_ap_px0, motion_int_px2, nfc_en_pi0, nfc_int_pi1, - pa6, pcc7, pe6, pe7, pex_l0_clkreq_n_pa1, pex_l0_rst_n_pa0, - pex_l1_clkreq_n_pa4, pex_l1_rst_n_pa3, pex_wake_n_pa2, ph6, pk0, pk1, pk2, - pk3, pk4, pk5, pk6, pk7, pl0, pl1, pwr_i2c_scl_py3, pwr_i2c_sda_py4, - pwr_int_n, pz0, pz1, pz2, pz3, pz4, pz5, qspi_cs_n_pee1, qspi_io0_pee2, - qspi_io1_pee3, qspi_io2_pee4, qspi_io3_pee5, qspi_sck_pee0, - sata_led_active_pa5, sdmmc1_clk_pm0, sdmmc1_cmd_pm1, sdmmc1_dat0_pm5, - sdmmc1_dat1_pm4, sdmmc1_dat2_pm3, sdmmc1_dat3_pm2, sdmmc3_clk_pp0, - sdmmc3_cmd_pp1, sdmmc3_dat0_pp5, sdmmc3_dat1_pp4, sdmmc3_dat2_pp3, - sdmmc3_dat3_pp2, shutdown, spdif_in_pcc3, spdif_out_pcc2, spi1_cs0_pc3, - spi1_cs1_pc4, spi1_miso_pc1, spi1_mosi_pc0, spi1_sck_pc2, spi2_cs0_pb7, - spi2_cs1_pdd0, spi2_miso_pb5, spi2_mosi_pb4, spi2_sck_pb6, spi4_cs0_pc6, - spi4_miso_pd0, spi4_mosi_pc7, spi4_sck_pc5, temp_alert_px4, touch_clk_pv7, - touch_int_px1, touch_rst_pv6, uart1_cts_pu3, uart1_rts_pu2, uart1_rx_pu1, - uart1_tx_pu0, uart2_cts_pg3, uart2_rts_pg2, uart2_rx_pg1, uart2_tx_pg0, - uart3_cts_pd4, uart3_rts_pd3, uart3_rx_pd2, uart3_tx_pd1, uart4_cts_pi7, - uart4_rts_pi6, uart4_rx_pi5, uart4_tx_pi4, usb_vbus_en0_pcc4, - usb_vbus_en1_pcc5, wifi_en_ph0, wifi_rst_ph1, wifi_wake_ap_ph2 - - Drive groups: - - These correspond to the Tegra APB_MISC_GP_*_PADCTRL (pad control) - registers. Note that where one of these registers controls a single pin - for which a PINMUX_AUX_* exists, see the list above for the pin name to - use when configuring the pinmux. - - pa6, pcc7, pe6, pe7, ph6, pk0, pk1, pk2, pk3, pk4, pk5, pk6, pk7, pl0, pl1, - pz0, pz1, pz2, pz3, pz4, pz5, sdmmc1, sdmmc2, sdmmc3, sdmmc4 - -Valid values for nvidia,functions are: - - aud, bcl, blink, ccla, cec, cldvfs, clk, core, cpu, displaya, displayb, - dmic1, dmic2, dmic3, dp, dtv, extperiph3, i2c1, i2c2, i2c3, i2cpmu, i2cvi, - i2s1, i2s2, i2s3, i2s4a, i2s4b, i2s5a, i2s5b, iqc0, iqc1, jtag, pe, pe0, - pe1, pmi, pwm0, pwm1, pwm2, pwm3, qspi, rsvd0, rsvd1, rsvd2, rsvd3, sata, - sdmmc1, sdmmc3, shutdown, soc, sor0, sor1, spdif, spi1, spi2, spi3, spi4, - sys, touch, uart, uarta, uartb, uartc, uartd, usb, vgp1, vgp2, vgp3, vgp4, - vgp5, vgp6, vimclk, vimclk2 - -Example: - - pinmux: pinmux@70000800 { - compatible = "nvidia,tegra210-pinmux"; - reg = <0x0 0x700008d4 0x0 0x2a8>, /* Pad control registers */ - <0x0 0x70003000 0x0 0x1000>; /* Mux registers */ - - pinctrl-names = "boot"; - pinctrl-0 = <&state_boot>; - - state_boot: pinmux { - gen1_i2c_scl_pj1 { - nvidia,pins = "gen1_i2c_scl_pj1", - nvidia,function = "i2c1"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; - nvidia,open-drain = <TEGRA_PIN_ENABLE>; - nvidia,io-hv = <TEGRA_PIN_ENABLE>; - }; - }; - }; -}; diff --git a/dts/Bindings/pinctrl/nvidia,tegra210-pinmux.yaml b/dts/Bindings/pinctrl/nvidia,tegra210-pinmux.yaml new file mode 100644 index 0000000000..e99387a6da --- /dev/null +++ b/dts/Bindings/pinctrl/nvidia,tegra210-pinmux.yaml @@ -0,0 +1,140 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra210-pinmux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra210 Pinmux Controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + compatible: + const: nvidia,tegra210-pinmux + + reg: + items: + - description: APB_MISC_GP_*_PADCTRL register (pad control) + - description: PINMUX_AUX_* registers (pinmux) + +patternProperties: + "^pinmux(-[a-z0-9-_]+)?$": + type: object + + # pin groups + additionalProperties: + $ref: nvidia,tegra-pinmux-common.yaml + additionalProperties: false + properties: + nvidia,pins: + items: + enum: [ als_prox_int_px3, ap_ready_pv5, ap_wake_bt_ph3, + ap_wake_nfc_ph7, aud_mclk_pbb0, batt_bcl, bt_rst_ph4, + bt_wake_ap_ph5, button_home_py1, button_power_on_px5, + button_slide_sw_py0, button_vol_down_px7, + button_vol_up_px6, cam1_mclk_ps0, cam1_pwdn_ps7, + cam1_strobe_pt1, cam2_mclk_ps1, cam2_pwdn_pt0, + cam_af_en_ps5, cam_flash_en_ps6, cam_i2c_scl_ps2, + cam_i2c_sda_ps3, cam_rst_ps4, clk_32k_in, clk_32k_out_py5, + clk_req, core_pwr_req, cpu_pwr_req, dap1_din_pb1, + dap1_dout_pb2, dap1_fs_pb0, dap1_sclk_pb3, dap2_din_paa2, + dap2_dout_paa3, dap2_fs_paa0, dap2_sclk_paa1, dap4_din_pj5, + dap4_dout_pj6, dap4_fs_pj4, dap4_sclk_pj7, dmic1_clk_pe0, + dmic1_dat_pe1, dmic2_clk_pe2, dmic2_dat_pe3, dmic3_clk_pe4, + dmic3_dat_pe5, dp_hpd0_pcc6, dvfs_clk_pbb2, dvfs_pwm_pbb1, + gen1_i2c_scl_pj1, gen1_i2c_sda_pj0, gen2_i2c_scl_pj2, + gen2_i2c_sda_pj3, gen3_i2c_scl_pf0, gen3_i2c_sda_pf1, + gpio_x1_aud_pbb3, gpio_x3_aud_pbb4, gps_en_pi2, + gps_rst_pi3, hdmi_cec_pcc0, hdmi_int_dp_hpd_pcc1, + jtag_rtck, lcd_bl_en_pv1, lcd_bl_pwm_pv0, lcd_gpio1_pv3, + lcd_gpio2_pv4, lcd_rst_pv2, lcd_te_py2, modem_wake_ap_px0, + motion_int_px2, nfc_en_pi0, nfc_int_pi1, pa6, pcc7, pe6, + pe7, pex_l0_clkreq_n_pa1, pex_l0_rst_n_pa0, + pex_l1_clkreq_n_pa4, pex_l1_rst_n_pa3, pex_wake_n_pa2, ph6, + pk0, pk1, pk2, pk3, pk4, pk5, pk6, pk7, pl0, pl1, + pwr_i2c_scl_py3, pwr_i2c_sda_py4, pwr_int_n, pz0, pz1, pz2, + pz3, pz4, pz5, qspi_cs_n_pee1, qspi_io0_pee2, + qspi_io1_pee3, qspi_io2_pee4, qspi_io3_pee5, qspi_sck_pee0, + sata_led_active_pa5, sdmmc1_clk_pm0, sdmmc1_cmd_pm1, + sdmmc1_dat0_pm5, sdmmc1_dat1_pm4, sdmmc1_dat2_pm3, + sdmmc1_dat3_pm2, sdmmc3_clk_pp0, sdmmc3_cmd_pp1, + sdmmc3_dat0_pp5, sdmmc3_dat1_pp4, sdmmc3_dat2_pp3, + sdmmc3_dat3_pp2, shutdown, spdif_in_pcc3, spdif_out_pcc2, + spi1_cs0_pc3, spi1_cs1_pc4, spi1_miso_pc1, spi1_mosi_pc0, + spi1_sck_pc2, spi2_cs0_pb7, spi2_cs1_pdd0, spi2_miso_pb5, + spi2_mosi_pb4, spi2_sck_pb6, spi4_cs0_pc6, spi4_miso_pd0, + spi4_mosi_pc7, spi4_sck_pc5, temp_alert_px4, touch_clk_pv7, + touch_int_px1, touch_rst_pv6, uart1_cts_pu3, uart1_rts_pu2, + uart1_rx_pu1, uart1_tx_pu0, uart2_cts_pg3, uart2_rts_pg2, + uart2_rx_pg1, uart2_tx_pg0, uart3_cts_pd4, uart3_rts_pd3, + uart3_rx_pd2, uart3_tx_pd1, uart4_cts_pi7, uart4_rts_pi6, + uart4_rx_pi5, uart4_tx_pi4, usb_vbus_en0_pcc4, + usb_vbus_en1_pcc5, wifi_en_ph0, wifi_rst_ph1, + wifi_wake_ap_ph2, + # drive groups + drive_pa6, drive_pcc7, drive_pe6, drive_pe7, drive_ph6, + drive_pk0, drive_pk1, drive_pk2, drive_pk3, drive_pk4, + drive_pk5, drive_pk6, drive_pk7, drive_pl0, drive_pl1, + drive_pz0, drive_pz1, drive_pz2, drive_pz3, drive_pz4, + drive_pz5, drive_sdmmc1, drive_sdmmc2, drive_sdmmc3, + drive_sdmmc4 ] + + nvidia,function: + enum: [ aud, bcl, blink, ccla, cec, cldvfs, clk, core, cpu, displaya, + displayb, dmic1, dmic2, dmic3, dp, dtv, extperiph3, i2c1, + i2c2, i2c3, i2cpmu, i2cvi, i2s1, i2s2, i2s3, i2s4a, i2s4b, + i2s5a, i2s5b, iqc0, iqc1, jtag, pe, pe0, pe1, pmi, pwm0, + pwm1, pwm2, pwm3, qspi, rsvd0, rsvd1, rsvd2, rsvd3, sata, + sdmmc1, sdmmc3, shutdown, soc, sor0, sor1, spdif, spi1, spi2, + spi3, spi4, sys, touch, uart, uarta, uartb, uartc, uartd, + usb, vgp1, vgp2, vgp3, vgp4, vgp5, vgp6, vimclk, vimclk2 ] + + nvidia,pull: true + nvidia,tristate: true + nvidia,pull-down-strength: true + nvidia,pull-up-strength: true + nvidia,high-speed-mode: true + nvidia,enable-input: true + nvidia,open-drain: true + nvidia,lock: true + nvidia,drive-type: true + nvidia,io-hv: true + nvidia,slew-rate-rising: true + nvidia,slew-rate-falling: true + + required: + - nvidia,pins + +additionalProperties: false + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/pinctrl/pinctrl-tegra.h> + + pinmux: pinmux@70000800 { + compatible = "nvidia,tegra210-pinmux"; + reg = <0x700008d4 0x02a8>, /* Pad control registers */ + <0x70003000 0x1000>; /* Mux registers */ + + pinctrl-names = "boot"; + pinctrl-0 = <&state_boot>; + + state_boot: pinmux { + gen1_i2c_scl_pj1 { + nvidia,pins = "gen1_i2c_scl_pj1"; + nvidia,function = "i2c1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + nvidia,io-hv = <TEGRA_PIN_ENABLE>; + }; + }; + }; +... diff --git a/dts/Bindings/pinctrl/nvidia,tegra234-pinmux-aon.yaml b/dts/Bindings/pinctrl/nvidia,tegra234-pinmux-aon.yaml new file mode 100644 index 0000000000..f3deda9f71 --- /dev/null +++ b/dts/Bindings/pinctrl/nvidia,tegra234-pinmux-aon.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra234-pinmux-aon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra234 AON Pinmux Controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +$ref: nvidia,tegra234-pinmux-common.yaml + +properties: + compatible: + const: nvidia,tegra234-pinmux-aon + +patternProperties: + "^pinmux(-[a-z0-9-]+)?$": + type: object + + # pin groups + additionalProperties: + properties: + nvidia,pins: + items: + enum: [ can0_dout_paa0, can0_din_paa1, can1_dout_paa2, + can1_din_paa3, can0_stb_paa4, can0_en_paa5, + soc_gpio49_paa6, can0_err_paa7, can1_stb_pbb0, + can1_en_pbb1, soc_gpio50_pbb2, can1_err_pbb3, + spi2_sck_pcc0, spi2_miso_pcc1, spi2_mosi_pcc2, + spi2_cs0_pcc3, touch_clk_pcc4, uart3_tx_pcc5, + uart3_rx_pcc6, gen2_i2c_scl_pcc7, gen2_i2c_sda_pdd0, + gen8_i2c_scl_pdd1, gen8_i2c_sda_pdd2, + sce_error_pee0, vcomp_alert_pee1, + ao_retention_n_pee2, batt_oc_pee3, power_on_pee4, + soc_gpio26_pee5, soc_gpio27_pee6, bootv_ctl_n_pee7, + hdmi_cec_pgg0, + # drive groups + drive_touch_clk_pcc4, drive_uart3_rx_pcc6, + drive_uart3_tx_pcc5, drive_gen8_i2c_sda_pdd2, + drive_gen8_i2c_scl_pdd1, drive_spi2_mosi_pcc2, + drive_gen2_i2c_scl_pcc7, drive_spi2_cs0_pcc3, + drive_gen2_i2c_sda_pdd0, drive_spi2_sck_pcc0, + drive_spi2_miso_pcc1, drive_can1_dout_paa2, + drive_can1_din_paa3, drive_can0_dout_paa0, + drive_can0_din_paa1, drive_can0_stb_paa4, + drive_can0_en_paa5, drive_soc_gpio49_paa6, + drive_can0_err_paa7, drive_can1_stb_pbb0, + drive_can1_en_pbb1, drive_soc_gpio50_pbb2, + drive_can1_err_pbb3, drive_sce_error_pee0, + drive_batt_oc_pee3, drive_bootv_ctl_n_pee7, + drive_power_on_pee4, drive_soc_gpio26_pee5, + drive_soc_gpio27_pee6, drive_ao_retention_n_pee2, + drive_vcomp_alert_pee1, drive_hdmi_cec_pgg0 ] + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/pinctrl/pinctrl-tegra.h> + + pinmux@c300000 { + compatible = "nvidia,tegra234-pinmux-aon"; + reg = <0xc300000 0x4000>; + + pinctrl-names = "cec"; + pinctrl-0 = <&cec_state>; + + cec_state: pinmux-cec { + cec { + nvidia,pins = "hdmi_cec_pgg0"; + nvidia,function = "gp"; + }; + }; + }; +... diff --git a/dts/Bindings/pinctrl/nvidia,tegra234-pinmux-common.yaml b/dts/Bindings/pinctrl/nvidia,tegra234-pinmux-common.yaml new file mode 100644 index 0000000000..4f9de78085 --- /dev/null +++ b/dts/Bindings/pinctrl/nvidia,tegra234-pinmux-common.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra234-pinmux-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra234 Pinmux Controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + reg: + items: + - description: pinmux registers + +patternProperties: + "^pinmux(-[a-z0-9-]+)?$": + type: object + + # pin groups + additionalProperties: + $ref: nvidia,tegra-pinmux-common.yaml + # We would typically use unevaluatedProperties here but that has the + # downside that all the properties in the common bindings become valid + # for all chip generations. In this case, however, we want the per-SoC + # bindings to be able to override which of the common properties are + # allowed, since not all pinmux generations support the same sets of + # properties. This way, the common bindings define the format of the + # properties but the per-SoC bindings define which of them apply to a + # given chip. + additionalProperties: false + properties: + nvidia,function: + enum: [ gp, uartc, i2c8, spi2, i2c2, can1, can0, rsvd0, eth0, eth2, + eth1, dp, eth3, i2c4, i2c7, i2c9, eqos, pe2, pe1, pe0, pe3, + pe4, pe5, pe6, pe7, pe8, pe9, pe10, qspi0, qspi1, qpsi, + sdmmc1, sce, soc, gpio, hdmi, ufs0, spi3, spi1, uartb, uarte, + usb, extperiph2, extperiph1, i2c3, vi0, i2c5, uarta, uartd, + i2c1, i2s4, i2s6, aud, spi5, touch, uartj, rsvd1, wdt, tsc, + dmic3, led, vi0_alt, i2s5, nv, extperiph3, extperiph4, spi4, + ccla, i2s1, i2s2, i2s3, i2s8, rsvd2, dmic5, dca, displayb, + displaya, vi1, dcb, dmic1, dmic4, i2s7, dmic2, dspk0, rsvd3, + tsc_alt, istctrl, vi1_alt, dspk1, igpu ] + + # out of the common properties, only these are allowed for Tegra234 + nvidia,pins: true + nvidia,pull: true + nvidia,tristate: true + nvidia,schmitt: true + nvidia,enable-input: true + nvidia,open-drain: true + nvidia,lock: true + nvidia,drive-type: true + nvidia,io-hv: true + + required: + - nvidia,pins + +required: + - compatible + - reg + +additionalProperties: true +... diff --git a/dts/Bindings/pinctrl/nvidia,tegra234-pinmux.yaml b/dts/Bindings/pinctrl/nvidia,tegra234-pinmux.yaml new file mode 100644 index 0000000000..17b865ecfc --- /dev/null +++ b/dts/Bindings/pinctrl/nvidia,tegra234-pinmux.yaml @@ -0,0 +1,139 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra234-pinmux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra234 Pinmux Controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +$ref: nvidia,tegra234-pinmux-common.yaml + +properties: + compatible: + const: nvidia,tegra234-pinmux + +patternProperties: + "^pinmux(-[a-z0-9-]+)?$": + type: object + + # pin groups + additionalProperties: + properties: + nvidia,pins: + items: + enum: [ dap6_sclk_pa0, dap6_dout_pa1, dap6_din_pa2, + dap6_fs_pa3, dap4_sclk_pa4, dap4_dout_pa5, + dap4_din_pa6, dap4_fs_pa7, soc_gpio08_pb0, + qspi0_sck_pc0, qspi0_cs_n_pc1, + qspi0_io0_pc2, qspi0_io1_pc3, qspi0_io2_pc4, + qspi0_io3_pc5, qspi1_sck_pc6, qspi1_cs_n_pc7, + qspi1_io0_pd0, qspi1_io1_pd1, qspi1_io2_pd2, + qspi1_io3_pd3, eqos_txc_pe0, eqos_td0_pe1, + eqos_td1_pe2, eqos_td2_pe3, eqos_td3_pe4, + eqos_tx_ctl_pe5, eqos_rd0_pe6, eqos_rd1_pe7, + eqos_rd2_pf0, eqos_rd3_pf1, eqos_rx_ctl_pf2, + eqos_rxc_pf3, eqos_sma_mdio_pf4, eqos_sma_mdc_pf5, + soc_gpio13_pg0, soc_gpio14_pg1, soc_gpio15_pg2, + soc_gpio16_pg3, soc_gpio17_pg4, soc_gpio18_pg5, + soc_gpio19_pg6, soc_gpio20_pg7, soc_gpio21_ph0, + soc_gpio22_ph1, soc_gpio06_ph2, uart4_tx_ph3, + uart4_rx_ph4, uart4_rts_ph5, uart4_cts_ph6, + soc_gpio41_ph7, soc_gpio42_pi0, soc_gpio43_pi1, + soc_gpio44_pi2, gen1_i2c_scl_pi3, gen1_i2c_sda_pi4, + cpu_pwr_req_pi5, soc_gpio07_pi6, + sdmmc1_clk_pj0, sdmmc1_cmd_pj1, sdmmc1_dat0_pj2, + sdmmc1_dat1_pj3, sdmmc1_dat2_pj4, sdmmc1_dat3_pj5, + pex_l0_clkreq_n_pk0, pex_l0_rst_n_pk1, + pex_l1_clkreq_n_pk2, pex_l1_rst_n_pk3, + pex_l2_clkreq_n_pk4, pex_l2_rst_n_pk5, + pex_l3_clkreq_n_pk6, pex_l3_rst_n_pk7, + pex_l4_clkreq_n_pl0, pex_l4_rst_n_pl1, + pex_wake_n_pl2, soc_gpio34_pl3, dp_aux_ch0_hpd_pm0, + dp_aux_ch1_hpd_pm1, dp_aux_ch2_hpd_pm2, + dp_aux_ch3_hpd_pm3, soc_gpio55_pm4, soc_gpio36_pm5, + soc_gpio53_pm6, soc_gpio38_pm7, dp_aux_ch3_n_pn0, + soc_gpio39_pn1, soc_gpio40_pn2, dp_aux_ch1_p_pn3, + dp_aux_ch1_n_pn4, dp_aux_ch2_p_pn5, dp_aux_ch2_n_pn6, + dp_aux_ch3_p_pn7, extperiph1_clk_pp0, + extperiph2_clk_pp1, cam_i2c_scl_pp2, cam_i2c_sda_pp3, + soc_gpio23_pp4, soc_gpio24_pp5, soc_gpio25_pp6, + pwr_i2c_scl_pp7, pwr_i2c_sda_pq0, soc_gpio28_pq1, + soc_gpio29_pq2, soc_gpio30_pq3, soc_gpio31_pq4, + soc_gpio32_pq5, soc_gpio33_pq6, soc_gpio35_pq7, + soc_gpio37_pr0, soc_gpio56_pr1, uart1_tx_pr2, + uart1_rx_pr3, uart1_rts_pr4, uart1_cts_pr5, + soc_gpio61_pw0, soc_gpio62_pw1, gpu_pwr_req_px0, + cv_pwr_req_px1, gp_pwm2_px2, gp_pwm3_px3, uart2_tx_px4, + uart2_rx_px5, uart2_rts_px6, uart2_cts_px7, spi3_sck_py0, + spi3_miso_py1, spi3_mosi_py2, spi3_cs0_py3, + spi3_cs1_py4, uart5_tx_py5, uart5_rx_py6, + uart5_rts_py7, uart5_cts_pz0, usb_vbus_en0_pz1, + usb_vbus_en1_pz2, spi1_sck_pz3, spi1_miso_pz4, + spi1_mosi_pz5, spi1_cs0_pz6, spi1_cs1_pz7, + spi5_sck_pac0, spi5_miso_pac1, spi5_mosi_pac2, + spi5_cs0_pac3, soc_gpio57_pac4, soc_gpio58_pac5, + soc_gpio59_pac6, soc_gpio60_pac7, soc_gpio45_pad0, + soc_gpio46_pad1, soc_gpio47_pad2, soc_gpio48_pad3, + ufs0_ref_clk_pae0, ufs0_rst_n_pae1, + pex_l5_clkreq_n_paf0, pex_l5_rst_n_paf1, + pex_l6_clkreq_n_paf2, pex_l6_rst_n_paf3, + pex_l7_clkreq_n_pag0, pex_l7_rst_n_pag1, + pex_l8_clkreq_n_pag2, pex_l8_rst_n_pag3, + pex_l9_clkreq_n_pag4, pex_l9_rst_n_pag5, + pex_l10_clkreq_n_pag6, pex_l10_rst_n_pag7, + sdmmc1_comp, eqos_comp, qspi_comp, + # drive groups + drive_soc_gpio08_pb0, drive_soc_gpio36_pm5, + drive_soc_gpio53_pm6, drive_soc_gpio55_pm4, + drive_soc_gpio38_pm7, drive_soc_gpio39_pn1, + drive_soc_gpio40_pn2, drive_dp_aux_ch0_hpd_pm0, + drive_dp_aux_ch1_hpd_pm1, drive_dp_aux_ch2_hpd_pm2, + drive_dp_aux_ch3_hpd_pm3, drive_dp_aux_ch1_p_pn3, + drive_dp_aux_ch1_n_pn4, drive_dp_aux_ch2_p_pn5, + drive_dp_aux_ch2_n_pn6, drive_dp_aux_ch3_p_pn7, + drive_dp_aux_ch3_n_pn0, drive_pex_l2_clkreq_n_pk4, + drive_pex_wake_n_pl2, drive_pex_l1_clkreq_n_pk2, + drive_pex_l1_rst_n_pk3, drive_pex_l0_clkreq_n_pk0, + drive_pex_l0_rst_n_pk1, drive_pex_l2_rst_n_pk5, + drive_pex_l3_clkreq_n_pk6, drive_pex_l3_rst_n_pk7, + drive_pex_l4_clkreq_n_pl0, drive_pex_l4_rst_n_pl1, + drive_soc_gpio34_pl3, drive_pex_l5_clkreq_n_paf0, + drive_pex_l5_rst_n_paf1, drive_pex_l6_clkreq_n_paf2, + drive_pex_l6_rst_n_paf3, drive_pex_l10_clkreq_n_pag6, + drive_pex_l10_rst_n_pag7, drive_pex_l7_clkreq_n_pag0, + drive_pex_l7_rst_n_pag1, drive_pex_l8_clkreq_n_pag2, + drive_pex_l8_rst_n_pag3, drive_pex_l9_clkreq_n_pag4, + drive_pex_l9_rst_n_pag5, drive_sdmmc1_clk_pj0, + drive_sdmmc1_cmd_pj1, drive_sdmmc1_dat3_pj5, + drive_sdmmc1_dat2_pj4, drive_sdmmc1_dat1_pj3, + drive_sdmmc1_dat0_pj2 ] + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/pinctrl/pinctrl-tegra.h> + + pinmux@2430000 { + compatible = "nvidia,tegra234-pinmux"; + reg = <0x2430000 0x17000>; + + pinctrl-names = "pex_rst"; + pinctrl-0 = <&pex_rst_c5_out_state>; + + pex_rst_c5_out_state: pinmux-pex-rst-c5-out { + pexrst { + nvidia,pins = "pex_l5_rst_n_paf1"; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,io-hv = <TEGRA_PIN_ENABLE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + }; + }; + }; +... diff --git a/dts/Bindings/pinctrl/nvidia,tegra30-pinmux.txt b/dts/Bindings/pinctrl/nvidia,tegra30-pinmux.txt deleted file mode 100644 index 0e6354c11e..0000000000 --- a/dts/Bindings/pinctrl/nvidia,tegra30-pinmux.txt +++ /dev/null @@ -1,144 +0,0 @@ -NVIDIA Tegra30 pinmux controller - -The Tegra30 pinctrl binding is very similar to the Tegra20 pinctrl binding, -as described in nvidia,tegra20-pinmux.txt. In fact, this document assumes -that binding as a baseline, and only documents the differences between the -two bindings. - -Required properties: -- compatible: "nvidia,tegra30-pinmux" -- reg: Should contain the register physical address and length for each of - the pad control and mux registers. - -Tegra30 adds the following optional properties for pin configuration subnodes: -- nvidia,enable-input: Integer. Enable the pin's input path. 0: no, 1: yes. -- nvidia,open-drain: Integer. Enable open drain mode. 0: no, 1: yes. -- nvidia,lock: Integer. Lock the pin configuration against further changes - until reset. 0: no, 1: yes. -- nvidia,io-reset: Integer. Reset the IO path. 0: no, 1: yes. - -As with Tegra20, see the Tegra TRM for complete details regarding which groups -support which functionality. - -Valid values for pin and group names are: - - per-pin mux groups: - - These all support nvidia,function, nvidia,tristate, nvidia,pull, - nvidia,enable-input, nvidia,lock. Some support nvidia,open-drain, - nvidia,io-reset. - - clk_32k_out_pa0, uart3_cts_n_pa1, dap2_fs_pa2, dap2_sclk_pa3, - dap2_din_pa4, dap2_dout_pa5, sdmmc3_clk_pa6, sdmmc3_cmd_pa7, gmi_a17_pb0, - gmi_a18_pb1, lcd_pwr0_pb2, lcd_pclk_pb3, sdmmc3_dat3_pb4, sdmmc3_dat2_pb5, - sdmmc3_dat1_pb6, sdmmc3_dat0_pb7, uart3_rts_n_pc0, lcd_pwr1_pc1, - uart2_txd_pc2, uart2_rxd_pc3, gen1_i2c_scl_pc4, gen1_i2c_sda_pc5, - lcd_pwr2_pc6, gmi_wp_n_pc7, sdmmc3_dat5_pd0, sdmmc3_dat4_pd1, lcd_dc1_pd2, - sdmmc3_dat6_pd3, sdmmc3_dat7_pd4, vi_d1_pd5, vi_vsync_pd6, vi_hsync_pd7, - lcd_d0_pe0, lcd_d1_pe1, lcd_d2_pe2, lcd_d3_pe3, lcd_d4_pe4, lcd_d5_pe5, - lcd_d6_pe6, lcd_d7_pe7, lcd_d8_pf0, lcd_d9_pf1, lcd_d10_pf2, lcd_d11_pf3, - lcd_d12_pf4, lcd_d13_pf5, lcd_d14_pf6, lcd_d15_pf7, gmi_ad0_pg0, - gmi_ad1_pg1, gmi_ad2_pg2, gmi_ad3_pg3, gmi_ad4_pg4, gmi_ad5_pg5, - gmi_ad6_pg6, gmi_ad7_pg7, gmi_ad8_ph0, gmi_ad9_ph1, gmi_ad10_ph2, - gmi_ad11_ph3, gmi_ad12_ph4, gmi_ad13_ph5, gmi_ad14_ph6, gmi_ad15_ph7, - gmi_wr_n_pi0, gmi_oe_n_pi1, gmi_dqs_pi2, gmi_cs6_n_pi3, gmi_rst_n_pi4, - gmi_iordy_pi5, gmi_cs7_n_pi6, gmi_wait_pi7, gmi_cs0_n_pj0, lcd_de_pj1, - gmi_cs1_n_pj2, lcd_hsync_pj3, lcd_vsync_pj4, uart2_cts_n_pj5, - uart2_rts_n_pj6, gmi_a16_pj7, gmi_adv_n_pk0, gmi_clk_pk1, gmi_cs4_n_pk2, - gmi_cs2_n_pk3, gmi_cs3_n_pk4, spdif_out_pk5, spdif_in_pk6, gmi_a19_pk7, - vi_d2_pl0, vi_d3_pl1, vi_d4_pl2, vi_d5_pl3, vi_d6_pl4, vi_d7_pl5, - vi_d8_pl6, vi_d9_pl7, lcd_d16_pm0, lcd_d17_pm1, lcd_d18_pm2, lcd_d19_pm3, - lcd_d20_pm4, lcd_d21_pm5, lcd_d22_pm6, lcd_d23_pm7, dap1_fs_pn0, - dap1_din_pn1, dap1_dout_pn2, dap1_sclk_pn3, lcd_cs0_n_pn4, lcd_sdout_pn5, - lcd_dc0_pn6, hdmi_int_pn7, ulpi_data7_po0, ulpi_data0_po1, ulpi_data1_po2, - ulpi_data2_po3, ulpi_data3_po4, ulpi_data4_po5, ulpi_data5_po6, - ulpi_data6_po7, dap3_fs_pp0, dap3_din_pp1, dap3_dout_pp2, dap3_sclk_pp3, - dap4_fs_pp4, dap4_din_pp5, dap4_dout_pp6, dap4_sclk_pp7, kb_col0_pq0, - kb_col1_pq1, kb_col2_pq2, kb_col3_pq3, kb_col4_pq4, kb_col5_pq5, - kb_col6_pq6, kb_col7_pq7, kb_row0_pr0, kb_row1_pr1, kb_row2_pr2, - kb_row3_pr3, kb_row4_pr4, kb_row5_pr5, kb_row6_pr6, kb_row7_pr7, - kb_row8_ps0, kb_row9_ps1, kb_row10_ps2, kb_row11_ps3, kb_row12_ps4, - kb_row13_ps5, kb_row14_ps6, kb_row15_ps7, vi_pclk_pt0, vi_mclk_pt1, - vi_d10_pt2, vi_d11_pt3, vi_d0_pt4, gen2_i2c_scl_pt5, gen2_i2c_sda_pt6, - sdmmc4_cmd_pt7, pu0, pu1, pu2, pu3, pu4, pu5, pu6, jtag_rtck_pu7, pv0, - pv1, pv2, pv3, ddc_scl_pv4, ddc_sda_pv5, crt_hsync_pv6, crt_vsync_pv7, - lcd_cs1_n_pw0, lcd_m1_pw1, spi2_cs1_n_pw2, spi2_cs2_n_pw3, clk1_out_pw4, - clk2_out_pw5, uart3_txd_pw6, uart3_rxd_pw7, spi2_mosi_px0, spi2_miso_px1, - spi2_sck_px2, spi2_cs0_n_px3, spi1_mosi_px4, spi1_sck_px5, spi1_cs0_n_px6, - spi1_miso_px7, ulpi_clk_py0, ulpi_dir_py1, ulpi_nxt_py2, ulpi_stp_py3, - sdmmc1_dat3_py4, sdmmc1_dat2_py5, sdmmc1_dat1_py6, sdmmc1_dat0_py7, - sdmmc1_clk_pz0, sdmmc1_cmd_pz1, lcd_sdin_pz2, lcd_wr_n_pz3, lcd_sck_pz4, - sys_clk_req_pz5, pwr_i2c_scl_pz6, pwr_i2c_sda_pz7, sdmmc4_dat0_paa0, - sdmmc4_dat1_paa1, sdmmc4_dat2_paa2, sdmmc4_dat3_paa3, sdmmc4_dat4_paa4, - sdmmc4_dat5_paa5, sdmmc4_dat6_paa6, sdmmc4_dat7_paa7, pbb0, - cam_i2c_scl_pbb1, cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6, pbb7, - cam_mclk_pcc0, pcc1, pcc2, sdmmc4_rst_n_pcc3, sdmmc4_clk_pcc4, - clk2_req_pcc5, pex_l2_rst_n_pcc6, pex_l2_clkreq_n_pcc7, - pex_l0_prsnt_n_pdd0, pex_l0_rst_n_pdd1, pex_l0_clkreq_n_pdd2, - pex_wake_n_pdd3, pex_l1_prsnt_n_pdd4, pex_l1_rst_n_pdd5, - pex_l1_clkreq_n_pdd6, pex_l2_prsnt_n_pdd7, clk3_out_pee0, clk3_req_pee1, - clk1_req_pee2, hdmi_cec_pee3, clk_32k_in, core_pwr_req, cpu_pwr_req, owr, - pwr_int_n. - - drive groups: - - These all support nvidia,pull-down-strength, nvidia,pull-up-strength, - nvidia,slew-rate-rising, nvidia,slew-rate-falling. Most but not all - support nvidia,high-speed-mode, nvidia,schmitt, nvidia,low-power-mode. - - ao1, ao2, at1, at2, at3, at4, at5, cdev1, cdev2, cec, crt, csus, dap1, - dap2, dap3, dap4, dbg, ddc, dev3, gma, gmb, gmc, gmd, gme, gmf, gmg, - gmh, gpv, lcd1, lcd2, owr, sdio1, sdio2, sdio3, spi, uaa, uab, uart2, - uart3, uda, vi1. - -Valid values for nvidia,functions are: - - blink, cec, clk_12m_out, clk_32k_in, core_pwr_req, cpu_pwr_req, crt, - dap, ddr, dev3, displaya, displayb, dtv, extperiph1, extperiph2, - extperiph3, gmi, gmi_alt, hda, hdcp, hdmi, hsi, i2c1, i2c2, i2c3, - i2c4, i2cpwr, i2s0, i2s1, i2s2, i2s3, i2s4, invalid, kbc, mio, nand, - nand_alt, owr, pcie, pwm0, pwm1, pwm2, pwm3, pwr_int_n, rsvd1, rsvd2, - rsvd3, rsvd4, rtck, sata, sdmmc1, sdmmc2, sdmmc3, sdmmc4, spdif, spi1, - spi2, spi2_alt, spi3, spi4, spi5, spi6, sysclk, test, trace, uarta, - uartb, uartc, uartd, uarte, ulpi, vgp1, vgp2, vgp3, vgp4, vgp5, vgp6, - vi, vi_alt1, vi_alt2, vi_alt3 - -Example: - - pinctrl@70000000 { - compatible = "nvidia,tegra30-pinmux"; - reg = < 0x70000868 0xd0 /* Pad control registers */ - 0x70003000 0x3e0 >; /* Mux registers */ - }; - -Example board file extract: - - pinctrl@70000000 { - sdmmc4_default: pinmux { - sdmmc4_clk_pcc4 { - nvidia,pins = "sdmmc4_clk_pcc4", - "sdmmc4_rst_n_pcc3"; - nvidia,function = "sdmmc4"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - }; - sdmmc4_dat0_paa0 { - nvidia,pins = "sdmmc4_dat0_paa0", - "sdmmc4_dat1_paa1", - "sdmmc4_dat2_paa2", - "sdmmc4_dat3_paa3", - "sdmmc4_dat4_paa4", - "sdmmc4_dat5_paa5", - "sdmmc4_dat6_paa6", - "sdmmc4_dat7_paa7"; - nvidia,function = "sdmmc4"; - nvidia,pull = <2>; - nvidia,tristate = <0>; - }; - }; - }; - - sdhci@78000400 { - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc4_default>; - }; diff --git a/dts/Bindings/pinctrl/nvidia,tegra30-pinmux.yaml b/dts/Bindings/pinctrl/nvidia,tegra30-pinmux.yaml new file mode 100644 index 0000000000..36c8f3301a --- /dev/null +++ b/dts/Bindings/pinctrl/nvidia,tegra30-pinmux.yaml @@ -0,0 +1,174 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra30-pinmux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra30 pinmux Controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + compatible: + const: nvidia,tegra30-pinmux + + reg: + items: + - description: pad control registers + - description: mux registers + +patternProperties: + "^pinmux(-[a-z0-9-_]+)?$": + type: object + + # pin groups + additionalProperties: + $ref: nvidia,tegra-pinmux-common.yaml + additionalProperties: false + properties: + nvidia,pins: + items: + enum: [ clk_32k_out_pa0, uart3_cts_n_pa1, dap2_fs_pa2, + dap2_sclk_pa3, dap2_din_pa4, dap2_dout_pa5, sdmmc3_clk_pa6, + sdmmc3_cmd_pa7, gmi_a17_pb0, gmi_a18_pb1, lcd_pwr0_pb2, + lcd_pclk_pb3, sdmmc3_dat3_pb4, sdmmc3_dat2_pb5, + sdmmc3_dat1_pb6, sdmmc3_dat0_pb7, uart3_rts_n_pc0, + lcd_pwr1_pc1, uart2_txd_pc2, uart2_rxd_pc3, + gen1_i2c_scl_pc4, gen1_i2c_sda_pc5, lcd_pwr2_pc6, + gmi_wp_n_pc7, sdmmc3_dat5_pd0, sdmmc3_dat4_pd1, + lcd_dc1_pd2, sdmmc3_dat6_pd3, sdmmc3_dat7_pd4, vi_d1_pd5, + vi_vsync_pd6, vi_hsync_pd7, lcd_d0_pe0, lcd_d1_pe1, + lcd_d2_pe2, lcd_d3_pe3, lcd_d4_pe4, lcd_d5_pe5, lcd_d6_pe6, + lcd_d7_pe7, lcd_d8_pf0, lcd_d9_pf1, lcd_d10_pf2, + lcd_d11_pf3, lcd_d12_pf4, lcd_d13_pf5, lcd_d14_pf6, + lcd_d15_pf7, gmi_ad0_pg0, gmi_ad1_pg1, gmi_ad2_pg2, + gmi_ad3_pg3, gmi_ad4_pg4, gmi_ad5_pg5, gmi_ad6_pg6, + gmi_ad7_pg7, gmi_ad8_ph0, gmi_ad9_ph1, gmi_ad10_ph2, + gmi_ad11_ph3, gmi_ad12_ph4, gmi_ad13_ph5, gmi_ad14_ph6, + gmi_ad15_ph7, gmi_wr_n_pi0, gmi_oe_n_pi1, gmi_dqs_pi2, + gmi_cs6_n_pi3, gmi_rst_n_pi4, gmi_iordy_pi5, gmi_cs7_n_pi6, + gmi_wait_pi7, gmi_cs0_n_pj0, lcd_de_pj1, gmi_cs1_n_pj2, + lcd_hsync_pj3, lcd_vsync_pj4, uart2_cts_n_pj5, + uart2_rts_n_pj6, gmi_a16_pj7, gmi_adv_n_pk0, gmi_clk_pk1, + gmi_cs4_n_pk2, gmi_cs2_n_pk3, gmi_cs3_n_pk4, spdif_out_pk5, + spdif_in_pk6, gmi_a19_pk7, vi_d2_pl0, vi_d3_pl1, vi_d4_pl2, + vi_d5_pl3, vi_d6_pl4, vi_d7_pl5, vi_d8_pl6, vi_d9_pl7, + lcd_d16_pm0, lcd_d17_pm1, lcd_d18_pm2, lcd_d19_pm3, + lcd_d20_pm4, lcd_d21_pm5, lcd_d22_pm6, lcd_d23_pm7, + dap1_fs_pn0, dap1_din_pn1, dap1_dout_pn2, dap1_sclk_pn3, + lcd_cs0_n_pn4, lcd_sdout_pn5, lcd_dc0_pn6, hdmi_int_pn7, + ulpi_data7_po0, ulpi_data0_po1, ulpi_data1_po2, + ulpi_data2_po3, ulpi_data3_po4, ulpi_data4_po5, + ulpi_data5_po6, ulpi_data6_po7, dap3_fs_pp0, dap3_din_pp1, + dap3_dout_pp2, dap3_sclk_pp3, dap4_fs_pp4, dap4_din_pp5, + dap4_dout_pp6, dap4_sclk_pp7, kb_col0_pq0, kb_col1_pq1, + kb_col2_pq2, kb_col3_pq3, kb_col4_pq4, kb_col5_pq5, + kb_col6_pq6, kb_col7_pq7, kb_row0_pr0, kb_row1_pr1, + kb_row2_pr2, kb_row3_pr3, kb_row4_pr4, kb_row5_pr5, + kb_row6_pr6, kb_row7_pr7, kb_row8_ps0, kb_row9_ps1, + kb_row10_ps2, kb_row11_ps3, kb_row12_ps4, kb_row13_ps5, + kb_row14_ps6, kb_row15_ps7, vi_pclk_pt0, vi_mclk_pt1, + vi_d10_pt2, vi_d11_pt3, vi_d0_pt4, gen2_i2c_scl_pt5, + gen2_i2c_sda_pt6, sdmmc4_cmd_pt7, pu0, pu1, pu2, pu3, pu4, + pu5, pu6, jtag_rtck_pu7, pv0, pv1, pv2, pv3, ddc_scl_pv4, + ddc_sda_pv5, crt_hsync_pv6, crt_vsync_pv7, lcd_cs1_n_pw0, + lcd_m1_pw1, spi2_cs1_n_pw2, spi2_cs2_n_pw3, clk1_out_pw4, + clk2_out_pw5, uart3_txd_pw6, uart3_rxd_pw7, spi2_mosi_px0, + spi2_miso_px1, spi2_sck_px2, spi2_cs0_n_px3, spi1_mosi_px4, + spi1_sck_px5, spi1_cs0_n_px6, spi1_miso_px7, ulpi_clk_py0, + ulpi_dir_py1, ulpi_nxt_py2, ulpi_stp_py3, sdmmc1_dat3_py4, + sdmmc1_dat2_py5, sdmmc1_dat1_py6, sdmmc1_dat0_py7, + sdmmc1_clk_pz0, sdmmc1_cmd_pz1, lcd_sdin_pz2, lcd_wr_n_pz3, + lcd_sck_pz4, sys_clk_req_pz5, pwr_i2c_scl_pz6, + pwr_i2c_sda_pz7, sdmmc4_dat0_paa0, sdmmc4_dat1_paa1, + sdmmc4_dat2_paa2, sdmmc4_dat3_paa3, sdmmc4_dat4_paa4, + sdmmc4_dat5_paa5, sdmmc4_dat6_paa6, sdmmc4_dat7_paa7, pbb0, + cam_i2c_scl_pbb1, cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6, + pbb7, cam_mclk_pcc0, pcc1, pcc2, sdmmc4_rst_n_pcc3, + sdmmc4_clk_pcc4, clk2_req_pcc5, pex_l2_rst_n_pcc6, + pex_l2_clkreq_n_pcc7, pex_l0_prsnt_n_pdd0, + pex_l0_rst_n_pdd1, pex_l0_clkreq_n_pdd2, pex_wake_n_pdd3, + pex_l1_prsnt_n_pdd4, pex_l1_rst_n_pdd5, + pex_l1_clkreq_n_pdd6, pex_l2_prsnt_n_pdd7, clk3_out_pee0, + clk3_req_pee1, clk1_req_pee2, hdmi_cec_pee3, clk_32k_in, + core_pwr_req, cpu_pwr_req, owr, pwr_int_n, + # drive groups + drive_ao1, drive_ao2, drive_at1, drive_at2, drive_at3, + drive_at4, drive_at5, drive_cdev1, drive_cdev2, drive_cec, + drive_crt, drive_csus, drive_dap1, drive_dap2, drive_dap3, + drive_dap4, drive_dbg, drive_ddc, drive_dev3, drive_gma, + drive_gmb, drive_gmc, drive_gmd, drive_gme, drive_gmf, + drive_gmg, drive_gmh, drive_gpv, drive_lcd1, drive_lcd2, + drive_owr, drive_sdio1, drive_sdio2, drive_sdio3, + drive_spi, drive_uaa, drive_uab, drive_uart2, drive_uart3, + drive_uda, drive_vi1 ] + + nvidia,function: + enum: [ blink, cec, clk_12m_out, clk_32k_in, core_pwr_req, + cpu_pwr_req, crt, dap, ddr, dev3, displaya, displayb, dtv, + extperiph1, extperiph2, extperiph3, gmi, gmi_alt, hda, hdcp, + hdmi, hsi, i2c1, i2c2, i2c3, i2c4, i2cpwr, i2s0, i2s1, i2s2, + i2s3, i2s4, invalid, kbc, mio, nand, nand_alt, owr, pcie, + pwm0, pwm1, pwm2, pwm3, pwr_int_n, rsvd1, rsvd2, rsvd3, + rsvd4, rtck, sata, sdmmc1, sdmmc2, sdmmc3, sdmmc4, spdif, + spi1, spi2, spi2_alt, spi3, spi4, spi5, spi6, sysclk, test, + trace, uarta, uartb, uartc, uartd, uarte, ulpi, vgp1, vgp2, + vgp3, vgp4, vgp5, vgp6, vi, vi_alt1, vi_alt2, vi_alt3 ] + + nvidia,pull: true + nvidia,tristate: true + nvidia,schmitt: true + nvidia,pull-down-strength: true + nvidia,pull-up-strength: true + nvidia,high-speed-mode: true + nvidia,low-power-mode: true + nvidia,enable-input: true + nvidia,open-drain: true + nvidia,lock: true + nvidia,io-reset: true + nvidia,slew-rate-rising: true + nvidia,slew-rate-falling: true + + required: + - nvidia,pins + +additionalProperties: false + +required: + - compatible + - reg + +examples: + - | + pinctrl@70000000 { + compatible = "nvidia,tegra30-pinmux"; + reg = <0x70000868 0x0d0>, /* Pad control registers */ + <0x70003000 0x3e0>; /* Mux registers */ + + pinmux { + sdmmc4_clk_pcc4 { + nvidia,pins = "sdmmc4_clk_pcc4", + "sdmmc4_rst_n_pcc3"; + nvidia,function = "sdmmc4"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + + sdmmc4_dat0_paa0 { + nvidia,pins = "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + }; + }; + }; +... diff --git a/dts/Bindings/pinctrl/nxp,s32g2-siul2-pinctrl.yaml b/dts/Bindings/pinctrl/nxp,s32g2-siul2-pinctrl.yaml new file mode 100644 index 0000000000..a24286e4de --- /dev/null +++ b/dts/Bindings/pinctrl/nxp,s32g2-siul2-pinctrl.yaml @@ -0,0 +1,123 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2022 NXP +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/nxp,s32g2-siul2-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP S32G2 pin controller + +maintainers: + - Ghennadi Procopciuc <Ghennadi.Procopciuc@oss.nxp.com> + - Chester Lin <chester62515@gmail.com> + +description: | + S32G2 pinmux is implemented in SIUL2 (System Integration Unit Lite2), + whose memory map is split into two regions: + SIUL2_0 @ 0x4009c000 + SIUL2_1 @ 0x44010000 + + Every SIUL2 region has multiple register types, and here only MSCR and + IMCR registers need to be revealed for kernel to configure pinmux. + + Please note that some register indexes are reserved in S32G2, such as + MSCR102-MSCR111, MSCR123-MSCR143, IMCR84-IMCR118 and IMCR398-IMCR429. + +properties: + compatible: + enum: + - nxp,s32g2-siul2-pinctrl + + reg: + description: | + A list of MSCR/IMCR register regions to be reserved. + - MSCR (Multiplexed Signal Configuration Register) + An MSCR register can configure the associated pin as either a GPIO pin + or a function output pin depends on the selected signal source. + - IMCR (Input Multiplexed Signal Configuration Register) + An IMCR register can configure the associated pin as function input + pin depends on the selected signal source. + items: + - description: MSCR registers group 0 in SIUL2_0 + - description: MSCR registers group 1 in SIUL2_1 + - description: MSCR registers group 2 in SIUL2_1 + - description: IMCR registers group 0 in SIUL2_0 + - description: IMCR registers group 1 in SIUL2_1 + - description: IMCR registers group 2 in SIUL2_1 + +patternProperties: + '-pins$': + type: object + additionalProperties: false + + patternProperties: + '-grp[0-9]$': + type: object + allOf: + - $ref: pinmux-node.yaml# + - $ref: pincfg-node.yaml# + description: | + Pinctrl node's client devices specify pin muxes using subnodes, + which in turn use the standard properties below. + + properties: + bias-disable: true + bias-high-impedance: true + bias-pull-up: true + bias-pull-down: true + drive-open-drain: true + input-enable: true + output-enable: true + + pinmux: + description: | + An integer array for representing pinmux configurations of + a device. Each integer consists of a PIN_ID and a 4-bit + selected signal source(SSS) as IOMUX setting, which is + calculated as: pinmux = (PIN_ID << 4 | SSS) + + slew-rate: + description: Supported slew rate based on Fmax values (MHz) + enum: [83, 133, 150, 166, 208] + + additionalProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + pinctrl@4009c240 { + compatible = "nxp,s32g2-siul2-pinctrl"; + + /* MSCR0-MSCR101 registers on siul2_0 */ + reg = <0x4009c240 0x198>, + /* MSCR112-MSCR122 registers on siul2_1 */ + <0x44010400 0x2c>, + /* MSCR144-MSCR190 registers on siul2_1 */ + <0x44010480 0xbc>, + /* IMCR0-IMCR83 registers on siul2_0 */ + <0x4009ca40 0x150>, + /* IMCR119-IMCR397 registers on siul2_1 */ + <0x44010c1c 0x45c>, + /* IMCR430-IMCR495 registers on siul2_1 */ + <0x440110f8 0x108>; + + llce-can0-pins { + llce-can0-grp0 { + pinmux = <0x2b0>; + input-enable; + slew-rate = <208>; + }; + + llce-can0-grp1 { + pinmux = <0x2c2>; + output-enable; + slew-rate = <208>; + }; + }; + }; +... diff --git a/dts/Bindings/pinctrl/oxnas,pinctrl.txt b/dts/Bindings/pinctrl/oxnas,pinctrl.txt deleted file mode 100644 index b1159434f5..0000000000 --- a/dts/Bindings/pinctrl/oxnas,pinctrl.txt +++ /dev/null @@ -1,56 +0,0 @@ -* Oxford Semiconductor OXNAS SoC Family Pin Controller - -Please refer to pinctrl-bindings.txt, ../gpio/gpio.txt, and -../interrupt-controller/interrupts.txt for generic information regarding -pin controller, GPIO, and interrupt bindings. - -OXNAS 'pin configuration node' is a node of a group of pins which can be -used for a specific device or function. This node represents configurations of -pins, optional function, and optional mux related configuration. - -Required properties for pin controller node: - - compatible: "oxsemi,ox810se-pinctrl" or "oxsemi,ox820-pinctrl" - - oxsemi,sys-ctrl: a phandle to the system controller syscon node - -Required properties for pin configuration sub-nodes: - - pins: List of pins to which the configuration applies. - -Optional properties for pin configuration sub-nodes: ----------------------------------------------------- - - function: Mux function for the specified pins. - - bias-pull-up: Enable weak pull-up. - -Example: - -pinctrl: pinctrl { - compatible = "oxsemi,ox810se-pinctrl"; - - /* Regmap for sys registers */ - oxsemi,sys-ctrl = <&sys>; - - pinctrl_uart2: pinctrl_uart2 { - uart2a { - pins = "gpio31"; - function = "fct3"; - }; - uart2b { - pins = "gpio32"; - function = "fct3"; - }; - }; -}; - -uart2: serial@900000 { - compatible = "ns16550a"; - reg = <0x900000 0x100000>; - clocks = <&sysclk>; - interrupts = <29>; - reg-shift = <0>; - fifo-size = <16>; - reg-io-width = <1>; - current-speed = <115200>; - no-loopback-test; - resets = <&reset 22>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; -}; diff --git a/dts/Bindings/pinctrl/pincfg-node.yaml b/dts/Bindings/pinctrl/pincfg-node.yaml index 71ed0a9def..be81ed22a0 100644 --- a/dts/Bindings/pinctrl/pincfg-node.yaml +++ b/dts/Bindings/pinctrl/pincfg-node.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/pinctrl/pincfg-node.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Generic pin configuration node schema +title: Generic Pin Configuration Node maintainers: - Linus Walleij <linus.walleij@linaro.org> @@ -52,11 +52,19 @@ properties: hardware supporting it the pull strength in Ohm. drive-push-pull: - type: boolean + oneOf: + - type: boolean + - $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + deprecated: true description: drive actively high and low drive-open-drain: - type: boolean + oneOf: + - type: boolean + - $ref: /schemas/types.yaml#/definitions/uint32 + const: 1 # No known cases of 0 + deprecated: true description: drive with open drain drive-open-source: @@ -114,6 +122,9 @@ properties: description: enable output on a pin without actively driving it (such as enabling an output buffer) + output-impedance-ohms: + description: set the output impedance of a pin to at most X ohms + output-low: type: boolean description: set the pin to output mode with low level diff --git a/dts/Bindings/pinctrl/pinctrl-bindings.txt b/dts/Bindings/pinctrl/pinctrl-bindings.txt index 9dae60acf9..6904072d39 100644 --- a/dts/Bindings/pinctrl/pinctrl-bindings.txt +++ b/dts/Bindings/pinctrl/pinctrl-bindings.txt @@ -97,47 +97,8 @@ For example: }; == Pin controller devices == -Required properties: See the pin controller driver specific documentation -Optional properties: -#pinctrl-cells: Number of pin control cells in addition to the index within the - pin controller device instance - -pinctrl-use-default: Boolean. Indicates that the OS can use the boot default - pin configuration. This allows using an OS that does not have a - driver for the pin controller. This property can be set either - globally for the pin controller or in child nodes for individual - pin group control. - -Pin controller devices should contain the pin configuration nodes that client -devices reference. - -For example: - - pincontroller { - ... /* Standard DT properties for the device itself elided */ - - state_0_node_a { - ... - }; - state_1_node_a { - ... - }; - state_1_node_b { - ... - }; - } - -The contents of each of those pin configuration child nodes is defined -entirely by the binding for the individual pin controller device. There -exists no common standard for this content. The pinctrl framework only -provides generic helper bindings that the pin controller driver can use. - -The pin configuration nodes need not be direct children of the pin controller -device; they may be grandchildren, for example. Whether this is legal, and -whether there is any interaction between the child and intermediate parent -nodes, is again defined entirely by the binding for the individual pin -controller device. +See pinctrl.yaml == Generic pin multiplexing node content == diff --git a/dts/Bindings/pinctrl/pinctrl-max77620.txt b/dts/Bindings/pinctrl/pinctrl-max77620.txt index 511fc23455..28fbca1800 100644 --- a/dts/Bindings/pinctrl/pinctrl-max77620.txt +++ b/dts/Bindings/pinctrl/pinctrl-max77620.txt @@ -38,7 +38,7 @@ Valid values for function properties are: gpio, lpm-control-in, fps-out, 32k-out, sd0-dvs-in, sd1-dvs-in, reference-out -Theres is also customised properties for the GPIO1, GPIO2 and GPIO3. These +There are also customised properties for the GPIO1, GPIO2 and GPIO3. These customised properties are required to configure FPS configuration parameters of these GPIOs. Please refer <devicetree/bindings/mfd/max77620.txt> for more detail of Flexible Power Sequence (FPS). diff --git a/dts/Bindings/pinctrl/pinctrl-mt8192.yaml b/dts/Bindings/pinctrl/pinctrl-mt8192.yaml deleted file mode 100644 index c4c0712116..0000000000 --- a/dts/Bindings/pinctrl/pinctrl-mt8192.yaml +++ /dev/null @@ -1,155 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/pinctrl/pinctrl-mt8192.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Mediatek MT8192 Pin Controller - -maintainers: - - Sean Wang <sean.wang@mediatek.com> - -description: | - The Mediatek's Pin controller is used to control SoC pins. - -properties: - compatible: - const: mediatek,mt8192-pinctrl - - gpio-controller: true - - '#gpio-cells': - description: | - Number of cells in GPIO specifier. Since the generic GPIO binding is used, - the amount of cells must be specified as 2. See the below - mentioned gpio binding representation for description of particular cells. - const: 2 - - gpio-ranges: - description: gpio valid number range. - maxItems: 1 - - reg: - description: | - Physical address base for gpio base registers. There are 11 GPIO - physical address base in mt8192. - maxItems: 11 - - reg-names: - description: | - Gpio base register names. - maxItems: 11 - - interrupt-controller: true - - '#interrupt-cells': - const: 2 - - interrupts: - description: The interrupt outputs to sysirq. - maxItems: 1 - -#PIN CONFIGURATION NODES -patternProperties: - '^pins': - type: object - description: | - A pinctrl node should contain at least one subnodes representing the - pinctrl groups available on the machine. Each subnode will list the - pins it needs, and how they should be configured, with regard to muxer - configuration, pullups, drive strength, input enable/disable and - input schmitt. - An example of using macro: - pincontroller { - /* GPIO0 set as multifunction GPIO0 */ - state_0_node_a { - pinmux = <PINMUX_GPIO0__FUNC_GPIO0>; - }; - /* GPIO1 set as multifunction PWM */ - state_0_node_b { - pinmux = <PINMUX_GPIO1__FUNC_PWM_1>; - }; - }; - $ref: "pinmux-node.yaml" - - properties: - pinmux: - description: | - Integer array, represents gpio pin number and mux setting. - Supported pin number and mux varies for different SoCs, and are defined - as macros in dt-bindings/pinctrl/<soc>-pinfunc.h directly. - - drive-strength: - description: | - It can support some arguments, such as MTK_DRIVE_4mA, MTK_DRIVE_6mA, etc. See - dt-bindings/pinctrl/mt65xx.h. It can only support 2/4/6/8/10/12/14/16mA in mt8192. - enum: [2, 4, 6, 8, 10, 12, 14, 16] - - bias-pull-down: true - - bias-pull-up: true - - bias-disable: true - - output-high: true - - output-low: true - - input-enable: true - - input-disable: true - - input-schmitt-enable: true - - input-schmitt-disable: true - - required: - - pinmux - - additionalProperties: false - -required: - - compatible - - reg - - interrupts - - interrupt-controller - - '#interrupt-cells' - - gpio-controller - - '#gpio-cells' - - gpio-ranges - -additionalProperties: false - -examples: - - | - #include <dt-bindings/pinctrl/mt8192-pinfunc.h> - #include <dt-bindings/interrupt-controller/arm-gic.h> - pio: pinctrl@10005000 { - compatible = "mediatek,mt8192-pinctrl"; - reg = <0x10005000 0x1000>, - <0x11c20000 0x1000>, - <0x11d10000 0x1000>, - <0x11d30000 0x1000>, - <0x11d40000 0x1000>, - <0x11e20000 0x1000>, - <0x11e70000 0x1000>, - <0x11ea0000 0x1000>, - <0x11f20000 0x1000>, - <0x11f30000 0x1000>, - <0x1000b000 0x1000>; - reg-names = "iocfg0", "iocfg_rm", "iocfg_bm", - "iocfg_bl", "iocfg_br", "iocfg_lm", - "iocfg_lb", "iocfg_rt", "iocfg_lt", - "iocfg_tl", "eint"; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pio 0 0 220>; - interrupt-controller; - interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH 0>; - #interrupt-cells = <2>; - - pins { - pinmux = <PINMUX_GPIO0__FUNC_GPIO0>; - output-low; - }; - }; diff --git a/dts/Bindings/pinctrl/pinctrl-mt8195.yaml b/dts/Bindings/pinctrl/pinctrl-mt8195.yaml deleted file mode 100644 index e17a399e09..0000000000 --- a/dts/Bindings/pinctrl/pinctrl-mt8195.yaml +++ /dev/null @@ -1,148 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/pinctrl/pinctrl-mt8195.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Mediatek MT8195 Pin Controller - -maintainers: - - Sean Wang <sean.wang@mediatek.com> - -description: | - The Mediatek's Pin controller is used to control SoC pins. - -properties: - compatible: - const: mediatek,mt8195-pinctrl - - gpio-controller: true - - '#gpio-cells': - description: | - Number of cells in GPIO specifier. Since the generic GPIO binding is used, - the amount of cells must be specified as 2. See the below - mentioned gpio binding representation for description of particular cells. - const: 2 - - gpio-ranges: - description: gpio valid number range. - maxItems: 1 - - reg: - description: | - Physical address base for gpio base registers. There are 8 GPIO - physical address base in mt8195. - maxItems: 8 - - reg-names: - description: | - Gpio base register names. - maxItems: 8 - - interrupt-controller: true - - '#interrupt-cells': - const: 2 - - interrupts: - description: The interrupt outputs to sysirq. - maxItems: 1 - -#PIN CONFIGURATION NODES -patternProperties: - '-pins$': - type: object - description: | - A pinctrl node should contain at least one subnodes representing the - pinctrl groups available on the machine. Each subnode will list the - pins it needs, and how they should be configured, with regard to muxer - configuration, pullups, drive strength, input enable/disable and - input schmitt. - An example of using macro: - pincontroller { - /* GPIO0 set as multifunction GPIO0 */ - gpio_pin { - pinmux = <PINMUX_GPIO0__FUNC_GPIO0>; - }; - /* GPIO8 set as multifunction SDA0 */ - i2c0_pin { - pinmux = <PINMUX_GPIO8__FUNC_SDA0>; - }; - }; - $ref: "pinmux-node.yaml" - - properties: - pinmux: - description: | - Integer array, represents gpio pin number and mux setting. - Supported pin number and mux varies for different SoCs, and are defined - as macros in dt-bindings/pinctrl/<soc>-pinfunc.h directly. - - drive-strength: - enum: [2, 4, 6, 8, 10, 12, 14, 16] - - bias-pull-down: true - - bias-pull-up: true - - bias-disable: true - - output-high: true - - output-low: true - - input-enable: true - - input-disable: true - - input-schmitt-enable: true - - input-schmitt-disable: true - - required: - - pinmux - - additionalProperties: false - -required: - - compatible - - reg - - interrupts - - interrupt-controller - - '#interrupt-cells' - - gpio-controller - - '#gpio-cells' - - gpio-ranges - -additionalProperties: false - -examples: - - | - #include <dt-bindings/pinctrl/mt8195-pinfunc.h> - #include <dt-bindings/interrupt-controller/arm-gic.h> - pio: pinctrl@10005000 { - compatible = "mediatek,mt8195-pinctrl"; - reg = <0x10005000 0x1000>, - <0x11d10000 0x1000>, - <0x11d30000 0x1000>, - <0x11d40000 0x1000>, - <0x11e20000 0x1000>, - <0x11eb0000 0x1000>, - <0x11f40000 0x1000>, - <0x1000b000 0x1000>; - reg-names = "iocfg0", "iocfg_bm", "iocfg_bl", - "iocfg_br", "iocfg_lm", "iocfg_rb", - "iocfg_tl", "eint"; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pio 0 0 144>; - interrupt-controller; - interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH 0>; - #interrupt-cells = <2>; - - pio-pins { - pinmux = <PINMUX_GPIO0__FUNC_GPIO0>; - output-low; - }; - }; diff --git a/dts/Bindings/pinctrl/pinctrl-rk805.txt b/dts/Bindings/pinctrl/pinctrl-rk805.txt index cbcbd31e3c..6ad49e51c7 100644 --- a/dts/Bindings/pinctrl/pinctrl-rk805.txt +++ b/dts/Bindings/pinctrl/pinctrl-rk805.txt @@ -27,7 +27,7 @@ Required properties: - pins: List of pins. Valid values of pins properties are: gpio0, gpio1. First 2 properties must be added in the RK805 PMIC node, documented in -Documentation/devicetree/bindings/mfd/rk808.txt +Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml Optional properties: ------------------- @@ -40,7 +40,7 @@ on default. Valid values for function properties are: gpio. -Theres is also not customised properties for any GPIO. +There are also not customised properties for any GPIO. Example: -------- diff --git a/dts/Bindings/pinctrl/pinctrl-single.txt b/dts/Bindings/pinctrl/pinctrl-single.txt deleted file mode 100644 index bfd222b054..0000000000 --- a/dts/Bindings/pinctrl/pinctrl-single.txt +++ /dev/null @@ -1,262 +0,0 @@ -One-register-per-pin type device tree based pinctrl driver - -Required properties: -- compatible : "pinctrl-single" or "pinconf-single". - "pinctrl-single" means that pinconf isn't supported. - "pinconf-single" means that generic pinconf is supported. - -- reg : offset and length of the register set for the mux registers - -- #pinctrl-cells : number of cells in addition to the index, set to 1 - or 2 for pinctrl-single,pins and set to 2 for pinctrl-single,bits - -- pinctrl-single,register-width : pinmux register access width in bits - -- pinctrl-single,function-mask : mask of allowed pinmux function bits - in the pinmux register - -Optional properties: -- pinctrl-single,function-off : function off mode for disabled state if - available and same for all registers; if not specified, disabling of - pin functions is ignored - -- pinctrl-single,bit-per-mux : boolean to indicate that one register controls - more than one pin, for which "pinctrl-single,function-mask" property specifies - position mask of pin. - -- pinctrl-single,drive-strength : array of value that are used to configure - drive strength in the pinmux register. They're value of drive strength - current and drive strength mask. - - /* drive strength current, mask */ - pinctrl-single,power-source = <0x30 0xf0>; - -- pinctrl-single,bias-pullup : array of value that are used to configure the - input bias pullup in the pinmux register. - - /* input, enabled pullup bits, disabled pullup bits, mask */ - pinctrl-single,bias-pullup = <0 1 0 1>; - -- pinctrl-single,bias-pulldown : array of value that are used to configure the - input bias pulldown in the pinmux register. - - /* input, enabled pulldown bits, disabled pulldown bits, mask */ - pinctrl-single,bias-pulldown = <2 2 0 2>; - - * Two bits to control input bias pullup and pulldown: User should use - pinctrl-single,bias-pullup & pinctrl-single,bias-pulldown. One bit means - pullup, and the other one bit means pulldown. - * Three bits to control input bias enable, pullup and pulldown. User should - use pinctrl-single,bias-pullup & pinctrl-single,bias-pulldown. Input bias - enable bit should be included in pullup or pulldown bits. - * Although driver could set PIN_CONFIG_BIAS_DISABLE, there's no property as - pinctrl-single,bias-disable. Because pinctrl single driver could implement - it by calling pulldown, pullup disabled. - -- pinctrl-single,input-schmitt : array of value that are used to configure - input schmitt in the pinmux register. In some silicons, there're two input - schmitt value (rising-edge & falling-edge) in the pinmux register. - - /* input schmitt value, mask */ - pinctrl-single,input-schmitt = <0x30 0x70>; - -- pinctrl-single,input-schmitt-enable : array of value that are used to - configure input schmitt enable or disable in the pinmux register. - - /* input, enable bits, disable bits, mask */ - pinctrl-single,input-schmitt-enable = <0x30 0x40 0 0x70>; - -- pinctrl-single,low-power-mode : array of value that are used to configure - low power mode of this pin. For some silicons, the low power mode will - control the output of the pin when the pad including the pin enter low - power mode. - /* low power mode value, mask */ - pinctrl-single,low-power-mode = <0x288 0x388>; - -- pinctrl-single,gpio-range : list of value that are used to configure a GPIO - range. They're value of subnode phandle, pin base in pinctrl device, pin - number in this range, GPIO function value of this GPIO range. - The number of parameters is depend on #pinctrl-single,gpio-range-cells - property. - - /* pin base, nr pins & gpio function */ - pinctrl-single,gpio-range = <&range 0 3 0>, <&range 3 9 1>; - -- interrupt-controller : standard interrupt controller binding if using - interrupts for wake-up events for example. In this case pinctrl-single - is set up as a chained interrupt controller and the wake-up interrupts - can be requested by the drivers using request_irq(). - -- #interrupt-cells : standard interrupt binding if using interrupts - -This driver assumes that there is only one register for each pin (unless the -pinctrl-single,bit-per-mux is set), and uses the common pinctrl bindings as -specified in the pinctrl-bindings.txt document in this directory. - -The pin configuration nodes for pinctrl-single are specified as pinctrl -register offset and values using pinctrl-single,pins. Only the bits specified -in pinctrl-single,function-mask are updated. - -When #pinctrl-cells = 1, then setting a pin for a device could be done with: - - pinctrl-single,pins = <0xdc 0x118>; - -Where 0xdc is the offset from the pinctrl register base address for the device -pinctrl register, and 0x118 contains the desired value of the pinctrl register. - -When #pinctrl-cells = 2, then setting a pin for a device could be done with: - - pinctrl-single,pins = <0xdc 0x30 0x07>; - -Where 0x30 is the pin configuration value and 0x07 is the pin mux mode value. -These two values are OR'd together to produce the value stored at offset 0xdc. -See the device example and static board pins example below for more information. - -In case when one register changes more than one pin's mux the -pinctrl-single,bits need to be used which takes three parameters: - - pinctrl-single,bits = <0xdc 0x18 0xff>; - -Where 0xdc is the offset from the pinctrl register base address for the -device pinctrl register, 0x18 is the desired value, and 0xff is the sub mask to -be used when applying this change to the register. - - -Optional sub-node: In case some pins could be configured as GPIO in the pinmux -register, those pins could be defined as a GPIO range. This sub-node is required -by pinctrl-single,gpio-range property. - -Required properties in sub-node: -- #pinctrl-single,gpio-range-cells : the number of parameters after phandle in - pinctrl-single,gpio-range property. - - range: gpio-range { - #pinctrl-single,gpio-range-cells = <3>; - }; - - -Example: - -/* SoC common file */ - -/* first controller instance for pins in core domain */ -pmx_core: pinmux@4a100040 { - compatible = "pinctrl-single"; - reg = <0x4a100040 0x0196>; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0xffff>; -}; - -/* second controller instance for pins in wkup domain */ -pmx_wkup: pinmux@4a31e040 { - compatible = "pinctrl-single"; - reg = <0x4a31e040 0x0038>; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0xffff>; -}; - -control_devconf0: pinmux@48002274 { - compatible = "pinctrl-single"; - reg = <0x48002274 4>; /* Single register */ - #address-cells = <1>; - #size-cells = <0>; - pinctrl-single,bit-per-mux; - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <0x5F>; -}; - -/* third controller instance for pins in gpio domain */ -pmx_gpio: pinmux@d401e000 { - compatible = "pinconf-single"; - reg = <0xd401e000 0x0330>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <7>; - - /* sparse GPIO range could be supported */ - pinctrl-single,gpio-range = <&range 0 3 0>, <&range 3 9 1>, - <&range 12 1 0>, <&range 13 29 1>, - <&range 43 1 0>, <&range 44 49 1>, - <&range 94 1 1>, <&range 96 2 1>; - - range: gpio-range { - #pinctrl-single,gpio-range-cells = <3>; - }; -}; - - -/* board specific .dts file */ - -&pmx_core { - - /* - * map all board specific static pins enabled by the pinctrl driver - * itself during the boot (or just set them up in the bootloader) - */ - pinctrl-names = "default"; - pinctrl-0 = <&board_pins>; - - board_pins: pinmux_board_pins { - pinctrl-single,pins = < - 0x6c 0xf - 0x6e 0xf - 0x70 0xf - 0x72 0xf - >; - }; - - uart0_pins: pinmux_uart0_pins { - pinctrl-single,pins = < - 0x208 0 /* UART0_RXD (IOCFG138) */ - 0x20c 0 /* UART0_TXD (IOCFG139) */ - >; - pinctrl-single,bias-pulldown = <0 2 2>; - pinctrl-single,bias-pullup = <0 1 1>; - }; - - /* map uart2 pins */ - uart2_pins: pinmux_uart2_pins { - pinctrl-single,pins = < - 0xd8 0x118 - 0xda 0 - 0xdc 0x118 - 0xde 0 - >; - }; -}; - -&control_devconf0 { - mcbsp1_pins: pinmux_mcbsp1_pins { - pinctrl-single,bits = < - 0x00 0x18 0x18 /* FSR/CLKR signal from FSX/CLKX pin */ - >; - }; - - mcbsp2_clks_pins: pinmux_mcbsp2_clks_pins { - pinctrl-single,bits = < - 0x00 0x40 0x40 /* McBSP2 CLKS from McBSP_CLKS pin */ - >; - }; - -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins>; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins>; -}; diff --git a/dts/Bindings/pinctrl/pinctrl-single.yaml b/dts/Bindings/pinctrl/pinctrl-single.yaml new file mode 100644 index 0000000000..c11495524d --- /dev/null +++ b/dts/Bindings/pinctrl/pinctrl-single.yaml @@ -0,0 +1,208 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/pinctrl-single.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic Pin Controller with a Single Register for One or More Pins + +maintainers: + - Tony Lindgren <tony@atomide.com> + +description: + Some pin controller devices use a single register for one or more pins. The + range of pin control registers can vary from one to many for each controller + instance. Some SoCs from Altera, Broadcom, HiSilicon, Ralink, and TI have this + kind of pin controller instances. + +properties: + compatible: + oneOf: + - enum: + - pinctrl-single + - pinconf-single + - items: + - enum: + - ti,am437-padconf + - ti,am654-padconf + - ti,dra7-padconf + - ti,omap2420-padconf + - ti,omap2430-padconf + - ti,omap3-padconf + - ti,omap4-padconf + - ti,omap5-padconf + - ti,j7200-padconf + - const: pinctrl-single + + reg: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + '#pinctrl-cells': + description: + Number of cells. Usually 2, consisting of register offset, pin configuration + value, and pinmux mode. Some controllers may use 1 for just offset and value. + enum: [ 1, 2 ] + + pinctrl-single,bit-per-mux: + description: Optional flag to indicate register controls more than one pin + type: boolean + + pinctrl-single,function-mask: + description: Mask of the allowed register bits + $ref: /schemas/types.yaml#/definitions/uint32 + + pinctrl-single,function-off: + description: Optional function off mode for disabled state + $ref: /schemas/types.yaml#/definitions/uint32 + + pinctrl-single,register-width: + description: Width of pin specific bits in the register + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 8, 16, 32 ] + + pinctrl-single,gpio-range: + description: Optional list of pin base, nr pins & gpio function + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle of a gpio-range node + - description: pin base + - description: number of pins + - description: gpio function + + '#gpio-range-cells': + description: No longer needed, may exist in older files for gpio-ranges + deprecated: true + const: 3 + + gpio-range: + description: Optional node for gpio range cells + type: object + additionalProperties: false + properties: + '#pinctrl-single,gpio-range-cells': + description: Number of gpio range cells + const: 3 + $ref: /schemas/types.yaml#/definitions/uint32 + +patternProperties: + '-pins(-[0-9]+)?$|-pin$': + description: + Pin group node name using naming ending in -pins followed by an optional + instance number + type: object + additionalProperties: false + + properties: + pinctrl-single,pins: + description: + Array of pins as described in pinmux-node.yaml for pinctrl-pin-array + $ref: /schemas/types.yaml#/definitions/uint32-array + + pinctrl-single,bits: + description: Register bit configuration for pinctrl-single,bit-per-mux + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: register offset + - description: value + - description: pin bitmask in the register + + pinctrl-single,bias-pullup: + description: Optional bias pull up configuration + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: input + - description: enabled pull up bits + - description: disabled pull up bits + - description: bias pull up mask + + pinctrl-single,bias-pulldown: + description: Optional bias pull down configuration + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: input + - description: enabled pull down bits + - description: disabled pull down bits + - description: bias pull down mask + + pinctrl-single,drive-strength: + description: Optional drive strength configuration + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: drive strength current + - description: drive strength mask + + pinctrl-single,input-schmitt: + description: Optional input schmitt configuration + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: input + - description: enable bits + - description: disable bits + - description: input schmitt mask + + pinctrl-single,low-power-mode: + description: Optional low power mode configuration + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: low power mode value + - description: low power mode mask + + pinctrl-single,slew-rate: + description: Optional slew rate configuration + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: slew rate + - description: slew rate mask + +allOf: + - $ref: pinctrl.yaml# + +required: + - compatible + - reg + - pinctrl-single,register-width + +additionalProperties: false + +examples: + - | + soc { + #address-cells = <1>; + #size-cells = <1>; + + pinmux@4a100040 { + compatible = "pinctrl-single"; + reg = <0x4a100040 0x0196>; + #address-cells = <1>; + #size-cells = <0>; + #pinctrl-cells = <2>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0xffff>; + pinctrl-single,gpio-range = <&range 0 3 0>; + range: gpio-range { + #pinctrl-single,gpio-range-cells = <3>; + }; + + uart2-pins { + pinctrl-single,pins = + <0xd8 0x118>, + <0xda 0>, + <0xdc 0x118>, + <0xde 0>; + }; + }; + }; diff --git a/dts/Bindings/pinctrl/pinctrl-sx150x.txt b/dts/Bindings/pinctrl/pinctrl-sx150x.txt deleted file mode 100644 index 4023bad2fe..0000000000 --- a/dts/Bindings/pinctrl/pinctrl-sx150x.txt +++ /dev/null @@ -1,72 +0,0 @@ -SEMTECH SX150x GPIO expander bindings - -Please refer to pinctrl-bindings.txt, ../gpio/gpio.txt, and -../interrupt-controller/interrupts.txt for generic information regarding -pin controller, GPIO, and interrupt bindings. - -Required properties: -- compatible: should be one of : - "semtech,sx1501q", - "semtech,sx1502q", - "semtech,sx1503q", - "semtech,sx1504q", - "semtech,sx1505q", - "semtech,sx1506q", - "semtech,sx1507q", - "semtech,sx1508q", - "semtech,sx1509q". - -- reg: The I2C slave address for this device. - -- #gpio-cells: Should be 2. The first cell is the GPIO number and the - second cell is used to specify optional parameters: - bit 0: polarity (0: normal, 1: inverted) - -- gpio-controller: Marks the device as a GPIO controller. - -Optional properties : -- interrupts: Interrupt specifier for the controllers interrupt. - -- interrupt-controller: Marks the device as a interrupt controller. - -- semtech,probe-reset: Will trigger a reset of the GPIO expander on probe, - only for sx1507q, sx1508q and sx1509q - -The GPIO expander can optionally be used as an interrupt controller, in -which case it uses the default two cell specifier. - -Required properties for pin configuration sub-nodes: - - pins: List of pins to which the configuration applies. - -Optional properties for pin configuration sub-nodes: ----------------------------------------------------- - - bias-disable: disable any pin bias, except the OSCIO pin - - bias-pull-up: pull up the pin, except the OSCIO pin - - bias-pull-down: pull down the pin, except the OSCIO pin - - bias-pull-pin-default: use pin-default pull state, except the OSCIO pin - - drive-push-pull: drive actively high and low - - drive-open-drain: drive with open drain only for sx1507q, sx1508q and sx1509q and except the OSCIO pin - - output-low: set the pin to output mode with low level - - output-high: set the pin to output mode with high level - -Example: - - i2c0gpio-expander@20{ - #gpio-cells = <2>; - #interrupt-cells = <2>; - compatible = "semtech,sx1506q"; - reg = <0x20>; - interrupt-parent = <&gpio_1>; - interrupts = <16 0>; - - gpio-controller; - interrupt-controller; - - pinctrl-names = "default"; - pinctrl-0 = <&gpio1_cfg_pins>; - - gpio1_cfg_pins: gpio1-cfg { - pins = "gpio1"; - bias-pull-up; - }; - }; diff --git a/dts/Bindings/pinctrl/pinctrl.yaml b/dts/Bindings/pinctrl/pinctrl.yaml new file mode 100644 index 0000000000..d471563119 --- /dev/null +++ b/dts/Bindings/pinctrl/pinctrl.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Pin controller device + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + - Rafał Miłecki <rafal@milecki.pl> + +description: | + Pin controller devices should contain the pin configuration nodes that client + devices reference. + + The contents of each of those pin configuration child nodes is defined + entirely by the binding for the individual pin controller device. There + exists no common standard for this content. The pinctrl framework only + provides generic helper bindings that the pin controller driver can use. + + The pin configuration nodes need not be direct children of the pin controller + device; they may be grandchildren, for example. Whether this is legal, and + whether there is any interaction between the child and intermediate parent + nodes, is again defined entirely by the binding for the individual pin + controller device. + +properties: + $nodename: + pattern: "^(pinctrl|pinmux)(@[0-9a-f]+)?$" + + "#pinctrl-cells": + description: > + Number of pin control cells in addition to the index within the pin + controller device instance. + + pinctrl-use-default: + type: boolean + description: > + Indicates that the OS can use the boot default pin configuration. This + allows using an OS that does not have a driver for the pin controller. + This property can be set either globally for the pin controller or in + child nodes for individual pin group control. + +additionalProperties: true diff --git a/dts/Bindings/pinctrl/pinmux-node.yaml b/dts/Bindings/pinctrl/pinmux-node.yaml index 551df3d9b8..ca9d246d46 100644 --- a/dts/Bindings/pinctrl/pinmux-node.yaml +++ b/dts/Bindings/pinctrl/pinmux-node.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/pinctrl/pinmux-node.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Generic pin multiplexing node schema +title: Generic Pin Multiplexing Node maintainers: - Linus Walleij <linus.walleij@linaro.org> @@ -31,7 +31,7 @@ description: | }; }; state_1_node_a { - spi0 { + spi { function = "spi0"; groups = "spi0pins"; }; diff --git a/dts/Bindings/pinctrl/qcom,ipq5018-tlmm.yaml b/dts/Bindings/pinctrl/qcom,ipq5018-tlmm.yaml new file mode 100644 index 0000000000..2330060654 --- /dev/null +++ b/dts/Bindings/pinctrl/qcom,ipq5018-tlmm.yaml @@ -0,0 +1,123 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,ipq5018-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm IPQ5018 TLMM pin controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm IPQ5018 SoC. + +properties: + compatible: + const: qcom,ipq5018-tlmm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-reserved-ranges: + minItems: 1 + maxItems: 24 + + gpio-line-names: + maxItems: 47 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-ipq5018-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-ipq5018-tlmm-state" + additionalProperties: false + +$defs: + qcom-ipq5018-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + pattern: "^gpio([0-9]|[1-3][0-9]|4[0-6])$" + minItems: 1 + maxItems: 8 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ atest_char, audio_pdm0, audio_pdm1, audio_rxbclk, audio_rxd, + audio_rxfsync, audio_rxmclk, audio_txbclk, audio_txd, + audio_txfsync, audio_txmclk, blsp0_i2c, blsp0_spi, blsp0_uart0, + blsp0_uart1, blsp1_i2c0, blsp1_i2c1, blsp1_spi0, blsp1_spi1, + blsp1_uart0, blsp1_uart1, blsp1_uart2, blsp2_i2c0, blsp2_i2c1, + blsp2_spi, blsp2_spi0, blsp2_spi1, btss, burn0, burn1, cri_trng, + cri_trng0, cri_trng1, cxc_clk, cxc_data, dbg_out, eud_gpio, + gcc_plltest, gcc_tlmm, gpio, led0, led2, mac0, mac1, mdc, mdio, + pcie0_clk, pcie0_wake, pcie1_clk, pcie1_wake, pll_test, + prng_rosc, pwm0, pwm1, pwm2, pwm3, qdss_cti_trig_in_a0, + qdss_cti_trig_in_a1, qdss_cti_trig_in_b0, qdss_cti_trig_in_b1, + qdss_cti_trig_out_a0, qdss_cti_trig_out_a1, + qdss_cti_trig_out_b0, qdss_cti_trig_out_b1, qdss_traceclk_a, + qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, + qdss_tracedata_a, qdss_tracedata_b, qspi_clk, qspi_cs, + qspi_data, reset_out, sdc1_clk, sdc1_cmd, sdc1_data, wci_txd, + wci_rxd, wsa_swrm, wsi_clk3, wsi_data3, wsis_reset, xfem ] + + required: + - pins + +required: + - compatible + - reg + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq5018-tlmm"; + reg = <0x01000000 0x300000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 47>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + + uart-w-state { + rx-pins { + pins = "gpio33"; + function = "blsp1_uart1"; + bias-pull-down; + }; + + tx-pins { + pins = "gpio34"; + function = "blsp1_uart1"; + bias-pull-down; + }; + }; + }; +... diff --git a/dts/Bindings/pinctrl/qcom,ipq5332-tlmm.yaml b/dts/Bindings/pinctrl/qcom,ipq5332-tlmm.yaml new file mode 100644 index 0000000000..e571cd6441 --- /dev/null +++ b/dts/Bindings/pinctrl/qcom,ipq5332-tlmm.yaml @@ -0,0 +1,118 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,ipq5332-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm IPQ5332 TLMM pin controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: | + Top Level Mode Multiplexer pin controller in Qualcomm IPQ5332 SoC. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,ipq5332-tlmm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-reserved-ranges: + minItems: 1 + maxItems: 27 + + gpio-line-names: + maxItems: 53 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-ipq5332-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-ipq5332-tlmm-state" + additionalProperties: false + +$defs: + qcom-ipq5332-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + pattern: "^gpio([0-9]|[1-4][0-9]|5[0-2])$" + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ atest_char, atest_char0, atest_char1, atest_char2, atest_char3, + atest_tic, audio_pri, audio_pri0, audio_pri1, audio_sec, + audio_sec0, audio_sec1, blsp0_i2c, blsp0_spi, blsp0_uart0, + blsp0_uart1, blsp1_i2c0, blsp1_i2c1, blsp1_spi0, blsp1_spi1, + blsp1_uart0, blsp1_uart1, blsp1_uart2, blsp2_i2c0, blsp2_i2c1, + blsp2_spi, blsp2_spi0, blsp2_spi1, core_voltage, cri_trng0, + cri_trng1, cri_trng2, cri_trng3, cxc_clk, cxc_data, dbg_out, + gcc_plltest, gcc_tlmm, gpio, lock_det, mac0, mac1, mdc0, mdc1, + mdio0, mdio1, pc, pcie0_clk, pcie0_wake, pcie1_clk, pcie1_wake, + pcie2_clk, pcie2_wake, pll_test, prng_rosc0, prng_rosc1, + prng_rosc2, prng_rosc3, pta, pwm0, pwm1, pwm2, pwm3, + qdss_cti_trig_in_a0, qdss_cti_trig_in_a1, qdss_cti_trig_in_b0, + qdss_cti_trig_in_b1, qdss_cti_trig_out_a0, + qdss_cti_trig_out_a1, qdss_cti_trig_out_b0, + qdss_cti_trig_out_b1, qdss_traceclk_a, qdss_traceclk_b, + qdss_tracectl_a, qdss_tracectl_b, qdss_tracedata_a, + qdss_tracedata_b, qspi_data, qspi_clk, qspi_cs, resout, rx0, + rx1, sdc_data, sdc_clk, sdc_cmd, tsens_max, wci_txd, wci_rxd, + wsi_clk, wsi_clk3, wsi_data, wsi_data3, wsis_reset, xfem ] + + required: + - pins + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq5332-tlmm"; + reg = <0x01000000 0x300000>; + gpio-controller; + #gpio-cells = <0x2>; + gpio-ranges = <&tlmm 0 0 53>; + interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <0x2>; + + serial0-state { + pins = "gpio18", "gpio19"; + function = "blsp0_uart0"; + drive-strength = <8>; + bias-pull-up; + }; + }; diff --git a/dts/Bindings/pinctrl/qcom,ipq6018-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,ipq6018-pinctrl.yaml index c64c932068..ed00fbaec1 100644 --- a/dts/Bindings/pinctrl/qcom,ipq6018-pinctrl.yaml +++ b/dts/Bindings/pinctrl/qcom,ipq6018-pinctrl.yaml @@ -7,11 +7,10 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Technologies, Inc. IPQ6018 TLMM block maintainers: - - Sricharan R <sricharan@codeaurora.org> + - Bjorn Andersson <andersson@kernel.org> -description: | - This binding describes the Top Level Mode Multiplexer block found in the - IPQ6018 platform. +description: + Top Level Mode Multiplexer pin controller in Qualcomm IPQ6018 SoC. properties: compatible: @@ -21,35 +20,24 @@ properties: maxItems: 1 interrupts: - description: Specifies the TLMM summary IRQ maxItems: 1 - interrupt-controller: true - - '#interrupt-cells': - description: - Specifies the PIN numbers and Flags, as defined in defined in - include/dt-bindings/interrupt-controller/irq.h - const: 2 - - gpio-controller: true - - '#gpio-cells': - description: Specifying the pin number and flags, as defined in - include/dt-bindings/gpio/gpio.h - const: 2 - - gpio-ranges: - maxItems: 1 - -#PIN CONFIGURATION NODES patternProperties: - '-pinmux$': - type: object + "-state$": + oneOf: + - $ref: "#/$defs/qcom-ipq6018-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-ipq6018-tlmm-state" + additionalProperties: false + +$defs: + qcom-ipq6018-tlmm-state: description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. - $ref: "/schemas/pinctrl/pincfg-node.yaml" + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -63,7 +51,7 @@ patternProperties: sdc2_data, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2, qdsd_data3 ] minItems: 1 - maxItems: 4 + maxItems: 16 function: description: @@ -72,12 +60,12 @@ patternProperties: enum: [ adsp_ext, alsp_int, atest_bbrx0, atest_bbrx1, atest_char, atest_char0, atest_char1, atest_char2, atest_char3, atest_combodac, atest_gpsadc0, atest_gpsadc1, atest_tsens, atest_wlan0, - atest_wlan1, backlight_en, bimc_dte0, bimc_dte1, blsp1_i2c, - blsp2_i2c, blsp3_i2c, blsp4_i2c, blsp5_i2c, blsp6_i2c, blsp1_spi, + atest_wlan1, backlight_en, bimc_dte0, bimc_dte1, blsp0_i2c, blsp1_i2c, + blsp2_i2c, blsp3_i2c, blsp4_i2c, blsp5_i2c, blsp0_spi, blsp1_spi, blsp1_spi_cs1, blsp1_spi_cs2, blsp1_spi_cs3, blsp2_spi, blsp2_spi_cs1, blsp2_spi_cs2, blsp2_spi_cs3, blsp3_spi, blsp3_spi_cs1, blsp3_spi_cs2, blsp3_spi_cs3, blsp4_spi, blsp5_spi, - blsp6_spi, blsp1_uart, blsp2_uart, blsp1_uim, blsp2_uim, cam1_rst, + blsp0_uart, blsp1_uart, blsp2_uart, blsp1_uim, blsp2_uim, cam1_rst, cam1_standby, cam_mclk0, cam_mclk1, cci_async, cci_i2c, cci_timer0, cci_timer1, cci_timer2, cdc_pdm0, codec_mad, dbg_out, display_5v, dmic0_clk, dmic0_data, dsi_rst, ebi0_wrcdc, euro_us, ext_lpass, @@ -92,61 +80,39 @@ patternProperties: qdss_ctitrig_in_b0, qdss_ctitrig_in_b1, qdss_ctitrig_out_a0, qdss_ctitrig_out_a1, qdss_ctitrig_out_b0, qdss_ctitrig_out_b1, qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, - qdss_tracedata_a, qdss_tracedata_b, reset_n, sd_card, sd_write, - sec_mi2s, smb_int, ssbi_wtr0, ssbi_wtr1, uim1, uim2, uim3, - uim_batt, wcss_bt, wcss_fm, wcss_wlan, webcam1_rst ] - - drive-strength: - enum: [2, 4, 6, 8, 10, 12, 14, 16] - default: 2 - description: - Selects the drive strength for the specified pins, in mA. - - bias-pull-down: true - - bias-pull-up: true - - bias-disable: true - - output-high: true - - output-low: true + qdss_tracedata_a, qdss_tracedata_b, qpic_pad, reset_n, sd_card, + sd_write, sec_mi2s, smb_int, ssbi_wtr0, ssbi_wtr1, uim1, uim2, + uim3, uim_batt, wcss_bt, wcss_fm, wcss_wlan, webcam1_rst ] required: - pins - - function - additionalProperties: false +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# required: - compatible - reg - - interrupts - - interrupt-controller - - '#interrupt-cells' - - gpio-controller - - '#gpio-cells' - - gpio-ranges -additionalProperties: false +unevaluatedProperties: false examples: - | - #include <dt-bindings/interrupt-controller/arm-gic.h> - tlmm: pinctrl@1000000 { - compatible = "qcom,ipq6018-pinctrl"; - reg = <0x01000000 0x300000>; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&tlmm 0 80>; - - serial3-pinmux { - pins = "gpio44", "gpio45"; - function = "blsp2_uart"; - drive-strength = <8>; - bias-pull-down; - }; + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq6018-pinctrl"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 80>; + + serial3-state { + pins = "gpio44", "gpio45"; + function = "blsp2_uart"; + drive-strength = <8>; + bias-pull-down; }; + }; diff --git a/dts/Bindings/pinctrl/qcom,ipq8074-pinctrl.txt b/dts/Bindings/pinctrl/qcom,ipq8074-pinctrl.txt deleted file mode 100644 index 7b151894f5..0000000000 --- a/dts/Bindings/pinctrl/qcom,ipq8074-pinctrl.txt +++ /dev/null @@ -1,181 +0,0 @@ -Qualcomm Technologies, Inc. IPQ8074 TLMM block - -This binding describes the Top Level Mode Multiplexer block found in the -IPQ8074 platform. - -- compatible: - Usage: required - Value type: <string> - Definition: must be "qcom,ipq8074-pinctrl" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: the base address and size of the TLMM register space. - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify the TLMM summary IRQ. - -- interrupt-controller: - Usage: required - Value type: <none> - Definition: identifies this node as an interrupt controller - -- #interrupt-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/interrupt-controller/irq.h> - -- gpio-controller: - Usage: required - Value type: <none> - Definition: identifies this node as a gpio controller - -- #gpio-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/gpio/gpio.h> - -- gpio-ranges: - Usage: required - Definition: see ../gpio/gpio.txt - -- gpio-reserved-ranges: - Usage: optional - Definition: see ../gpio/gpio.txt - -Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for -a general description of GPIO and interrupt bindings. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -The pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, drive strength, etc. - - -PIN CONFIGURATION NODES: - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pin configuration subnode: - -- pins: - Usage: required - Value type: <string-array> - Definition: List of gpio pins affected by the properties specified in - this subnode. Valid pins are: - gpio0-gpio69 - -- function: - Usage: required - Value type: <string> - Definition: Specify the alternative function to be configured for the - specified pins. Functions are only valid for gpio pins. - Valid values are: - atest_char, atest_char0, atest_char1, atest_char2, - atest_char3, audio_rxbclk, audio_rxd, audio_rxfsync, - audio_rxmclk, audio_txbclk, audio_txd, audio_txfsync, - audio_txmclk, blsp0_i2c, blsp0_spi, blsp0_uart, blsp1_i2c, - blsp1_spi, blsp1_uart, blsp2_i2c, blsp2_spi, blsp2_uart, - blsp3_i2c, blsp3_spi, blsp3_spi0, blsp3_spi1, blsp3_spi2, - blsp3_spi3, blsp3_uart, blsp4_i2c0, blsp4_i2c1, blsp4_spi0, - blsp4_spi1, blsp4_uart0, blsp4_uart1, blsp5_i2c, blsp5_spi, - blsp5_uart, burn0, burn1, cri_trng, cri_trng0, cri_trng1, - cxc0, cxc1, dbg_out, gcc_plltest, gcc_tlmm, gpio, ldo_en, - ldo_update, led0, led1, led2, mac0_sa0, mac0_sa1, mac1_sa0, - mac1_sa1, mac1_sa2, mac1_sa3, mac2_sa0, mac2_sa1, mdc, - mdio, pcie0_clk, pcie0_rst, pcie0_wake, pcie1_clk, - pcie1_rst, pcie1_wake, pcm_drx, pcm_dtx, pcm_fsync, - pcm_pclk, pcm_zsi0, pcm_zsi1, prng_rosc, pta1_0, pta1_1, - pta1_2, pta2_0, pta2_1, pta2_2, pwm0, pwm1, pwm2, pwm3, - qdss_cti_trig_in_a0, qdss_cti_trig_in_a1, - qdss_cti_trig_in_b0, qdss_cti_trig_in_b1, - qdss_cti_trig_out_a0, qdss_cti_trig_out_a1, - qdss_cti_trig_out_b0, qdss_cti_trig_out_b1, - qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a, - qdss_tracectl_b, qdss_tracedata_a, qdss_tracedata_b, - qpic, rx0, rx1, rx2, sd_card, sd_write, tsens_max, wci2a, - wci2b, wci2c, wci2d - -- bias-disable: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as no pull. - -- bias-pull-down: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull down. - -- bias-pull-up: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull up. - -- output-high: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - high. - -- output-low: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - low. - -- drive-strength: - Usage: optional - Value type: <u32> - Definition: Selects the drive strength for the specified pins, in mA. - Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 - -Example: - - tlmm: pinctrl@1000000 { - compatible = "qcom,ipq8074-pinctrl"; - reg = <0x1000000 0x300000>; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&tlmm 0 0 70>; - interrupt-controller; - #interrupt-cells = <2>; - - uart2: uart2-default { - mux { - pins = "gpio23", "gpio24"; - function = "blsp4_uart1"; - }; - - rx { - pins = "gpio23"; - drive-strength = <4>; - bias-disable; - }; - - tx { - pins = "gpio24"; - drive-strength = <2>; - bias-pull-up; - }; - }; - }; diff --git a/dts/Bindings/pinctrl/qcom,ipq8074-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,ipq8074-pinctrl.yaml new file mode 100644 index 0000000000..6f90dbbdbd --- /dev/null +++ b/dts/Bindings/pinctrl/qcom,ipq8074-pinctrl.yaml @@ -0,0 +1,121 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,ipq8074-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm IPQ8074 TLMM pin controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm IPQ8074 SoC. + +properties: + compatible: + const: qcom,ipq8074-pinctrl + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-reserved-ranges: + minItems: 1 + maxItems: 35 + + gpio-line-names: + maxItems: 70 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-ipq8074-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-ipq8074-tlmm-state" + additionalProperties: false + +$defs: + qcom-ipq8074-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + pattern: "^gpio([0-9]|[1-6][0-9]|70)$" + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ gpio, atest_char, atest_char0, atest_char1, atest_char2, + atest_char3, audio_rxbclk, audio_rxd, audio_rxfsync, + audio_rxmclk, audio_txbclk, audio_txd, audio_txfsync, + audio_txmclk, blsp0_i2c, blsp0_spi, blsp0_uart, blsp1_i2c, + blsp1_spi, blsp1_uart, blsp2_i2c, blsp2_spi, blsp2_uart, + blsp3_i2c, blsp3_spi, blsp3_spi0, blsp3_spi1, blsp3_spi2, + blsp3_spi3, blsp3_uart, blsp4_i2c0, blsp4_i2c1, blsp4_spi0, + blsp4_spi1, blsp4_uart0, blsp4_uart1, blsp5_i2c, blsp5_spi, + blsp5_uart, burn0, burn1, cri_trng, cri_trng0, cri_trng1, cxc0, + cxc1, dbg_out, gcc_plltest, gcc_tlmm, ldo_en, ldo_update, led0, + led1, led2, mac0_sa0, mac0_sa1, mac1_sa0, mac1_sa1, mac1_sa2, + mac1_sa3, mac2_sa0, mac2_sa1, mdc, mdio, pcie0_clk, pcie0_rst, + pcie0_wake, pcie1_clk, pcie1_rst, pcie1_wake, pcm_drx, pcm_dtx, + pcm_fsync, pcm_pclk, pcm_zsi0, pcm_zsi1, prng_rosc, pta1_0, + pta1_1, pta1_2, pta2_0, pta2_1, pta2_2, pwm0, pwm1, pwm2, pwm3, + qdss_cti_trig_in_a0, qdss_cti_trig_in_a1, qdss_cti_trig_in_b0, + qdss_cti_trig_in_b1, qdss_cti_trig_out_a0, + qdss_cti_trig_out_a1, qdss_cti_trig_out_b0, + qdss_cti_trig_out_b1, qdss_traceclk_a, qdss_traceclk_b, + qdss_tracectl_a, qdss_tracectl_b, qdss_tracedata_a, + qdss_tracedata_b, qpic, rx0, rx1, rx2, sd_card, sd_write, + tsens_max, wci2a, wci2b, wci2c, wci2d ] + + required: + - pins + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq8074-pinctrl"; + reg = <0x01000000 0x300000>; + gpio-controller; + #gpio-cells = <0x2>; + gpio-ranges = <&tlmm 0 0 70>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <0x2>; + + serial4-state { + pins = "gpio23", "gpio24"; + function = "blsp4_uart1"; + drive-strength = <8>; + bias-disable; + }; + }; diff --git a/dts/Bindings/pinctrl/qcom,ipq9574-tlmm.yaml b/dts/Bindings/pinctrl/qcom,ipq9574-tlmm.yaml new file mode 100644 index 0000000000..bca903b5da --- /dev/null +++ b/dts/Bindings/pinctrl/qcom,ipq9574-tlmm.yaml @@ -0,0 +1,114 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,ipq9574-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. IPQ9574 TLMM block + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm IPQ9574 SoC. + +properties: + compatible: + const: qcom,ipq9574-tlmm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-reserved-ranges: + minItems: 1 + maxItems: 33 + + gpio-line-names: + maxItems: 65 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-ipq9574-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-ipq9574-tlmm-state" + additionalProperties: false + +$defs: + qcom-ipq9574-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + pattern: "^gpio([0-9]|[1-5][0-9]|6[0-4])$" + minItems: 1 + maxItems: 8 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ atest_char, atest_char0, atest_char1, atest_char2, atest_char3, + audio_pdm0, audio_pdm1, audio_pri, audio_sec, blsp0_spi, blsp0_uart, + blsp1_i2c, blsp1_spi, blsp1_uart, blsp2_i2c, blsp2_spi, + blsp2_uart, blsp3_i2c, blsp3_spi, blsp3_uart, blsp4_i2c, + blsp4_spi, blsp4_uart, blsp5_i2c, blsp5_uart, cri_trng0, + cri_trng1, cri_trng2, cri_trng3, cxc0, cxc1, dbg_out, dwc_ddrphy, + gcc_plltest, gcc_tlmm, gpio, mac, mdc, mdio, pcie0_clk, pcie0_wake, + pcie1_clk, pcie1_wake, pcie2_clk, pcie2_wake, pcie3_clk, pcie3_wake, + prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, pta, pwm, + qdss_cti_trig_in_a0, qdss_cti_trig_in_a1, qdss_cti_trig_in_b0, + qdss_cti_trig_in_b1, qdss_cti_trig_out_a0, qdss_cti_trig_out_a1, + qdss_cti_trig_out_b0, qdss_cti_trig_out_b1, qdss_traceclk_a, + qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, qdss_tracedata_a, + qdss_tracedata_b, qspi_clk, qspi_cs, qspi_data, + rx0, rx1, sdc_clk, sdc_cmd, sdc_data, sdc_rclk, tsens_max, + wci20, wci21, wsa_swrm ] + + required: + - pins + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq9574-tlmm"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 65>; + + uart2-state { + pins = "gpio34", "gpio35"; + function = "blsp2_uart"; + drive-strength = <8>; + bias-pull-down; + }; + }; diff --git a/dts/Bindings/pinctrl/qcom,lpass-lpi-common.yaml b/dts/Bindings/pinctrl/qcom,lpass-lpi-common.yaml new file mode 100644 index 0000000000..3b50457304 --- /dev/null +++ b/dts/Bindings/pinctrl/qcom,lpass-lpi-common.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,lpass-lpi-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SoC LPASS LPI TLMM Common Properties + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + Common properties for the Top Level Mode Multiplexer pin controllers in the + Low Power Audio SubSystem (LPASS) Low Power Island (LPI) of Qualcomm SoCs. + +properties: + gpio-controller: true + + "#gpio-cells": + description: + Specifying the pin number and flags, as defined in + include/dt-bindings/gpio/gpio.h + const: 2 + + gpio-ranges: + maxItems: 1 + +required: + - gpio-controller + - "#gpio-cells" + - gpio-ranges + +allOf: + - $ref: pinctrl.yaml# + +additionalProperties: true + +$defs: + qcom-tlmm-state: + properties: + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + default: 2 + description: + Selects the drive strength for the specified pins, in mA. + + slew-rate: + enum: [0, 1, 2, 3] + default: 0 + description: | + 0: No adjustments + 1: Higher Slew rate (faster edges) + 2: Lower Slew rate (slower edges) + 3: Reserved (No adjustments) + + bias-bus-hold: true + bias-pull-down: true + bias-pull-up: true + bias-disable: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + - function + + allOf: + - $ref: pincfg-node.yaml# + - $ref: pinmux-node.yaml# + + additionalProperties: true + diff --git a/dts/Bindings/pinctrl/qcom,mdm9607-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,mdm9607-tlmm.yaml index 3b02dc6626..bd3cbb44c9 100644 --- a/dts/Bindings/pinctrl/qcom,mdm9607-pinctrl.yaml +++ b/dts/Bindings/pinctrl/qcom,mdm9607-tlmm.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/pinctrl/qcom,mdm9607-pinctrl.yaml# +$id: http://devicetree.org/schemas/pinctrl/qcom,mdm9607-tlmm.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Technologies, Inc. MDM9607 TLMM block @@ -9,9 +9,8 @@ title: Qualcomm Technologies, Inc. MDM9607 TLMM block maintainers: - Konrad Dybcio <konrad.dybcio@somainline.org> -description: | - This binding describes the Top Level Mode Multiplexer block found in the - MDM9607 platform. +description: + Top Level Mode Multiplexer pin controller in Qualcomm MDM9607 SoC. allOf: - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# @@ -23,36 +22,28 @@ properties: reg: maxItems: 1 - interrupts: true - interrupt-controller: true - '#interrupt-cells': true - gpio-controller: true - gpio-reserved-ranges: true - '#gpio-cells': true - gpio-ranges: true - wakeup-parent: true - -required: - - compatible - - reg + interrupts: + maxItems: 1 -additionalProperties: false + gpio-reserved-ranges: true patternProperties: - '-state$': + "-state$": oneOf: - $ref: "#/$defs/qcom-mdm9607-tlmm-state" - - patternProperties: + - additionalProperties: false + patternProperties: ".*": $ref: "#/$defs/qcom-mdm9607-tlmm-state" -'$defs': +$defs: qcom-mdm9607-tlmm-state: type: object description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state" + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -104,30 +95,25 @@ patternProperties: uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset, uim_batt, wlan_en1, ] - bias-disable: true - bias-pull-down: true - bias-pull-up: true - drive-strength: true - input-enable: true - output-high: true - output-low: true - required: - pins - - function - additionalProperties: false +required: + - compatible + - reg + +unevaluatedProperties: false examples: - | - #include <dt-bindings/interrupt-controller/arm-gic.h> - tlmm: pinctrl@1000000 { - compatible = "qcom,mdm9607-tlmm"; - reg = <0x01000000 0x300000>; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - gpio-ranges = <&msmgpio 0 0 80>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@1000000 { + compatible = "qcom,mdm9607-tlmm"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + gpio-ranges = <&msmgpio 0 0 80>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; diff --git a/dts/Bindings/pinctrl/qcom,mdm9615-pinctrl.txt b/dts/Bindings/pinctrl/qcom,mdm9615-pinctrl.txt deleted file mode 100644 index d469739688..0000000000 --- a/dts/Bindings/pinctrl/qcom,mdm9615-pinctrl.txt +++ /dev/null @@ -1,161 +0,0 @@ -Qualcomm MDM9615 TLMM block - -This binding describes the Top Level Mode Multiplexer block found in the -MDM9615 platform. - -- compatible: - Usage: required - Value type: <string> - Definition: must be "qcom,mdm9615-pinctrl" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: the base address and size of the TLMM register space. - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify the TLMM summary IRQ. - -- interrupt-controller: - Usage: required - Value type: <none> - Definition: identifies this node as an interrupt controller - -- #interrupt-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/interrupt-controller/irq.h> - -- gpio-controller: - Usage: required - Value type: <none> - Definition: identifies this node as a gpio controller - -- #gpio-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/gpio/gpio.h> - -- gpio-ranges: - Usage: required - Definition: see ../gpio/gpio.txt - -- gpio-reserved-ranges: - Usage: optional - Definition: see ../gpio/gpio.txt - -Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for -a general description of GPIO and interrupt bindings. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -The pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, drive strength, etc. - - -PIN CONFIGURATION NODES: - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pin configuration subnode: - -- pins: - Usage: required - Value type: <string-array> - Definition: List of gpio pins affected by the properties specified in - this subnode. Valid pins are: - gpio0-gpio87 - -- function: - Usage: required - Value type: <string> - Definition: Specify the alternative function to be configured for the - specified pins. - Valid values are: - gpio, gsbi2_i2c, gsbi3, gsbi4, gsbi5_i2c, gsbi5_uart, - sdc2, ebi2_lcdc, ps_hold, prim_audio, sec_audio, - cdc_mclk - -- bias-disable: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as no pull. - -- bias-pull-down: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull down. - -- bias-pull-up: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull up. - -- output-high: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - high. - -- output-low: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - low. - -- drive-strength: - Usage: optional - Value type: <u32> - Definition: Selects the drive strength for the specified pins, in mA. - Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 - -Example: - - msmgpio: pinctrl@800000 { - compatible = "qcom,mdm9615-pinctrl"; - reg = <0x800000 0x4000>; - - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&msmgpio 0 0 88>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <0 16 0x4>; - - gsbi8_uart: gsbi8-uart { - mux { - pins = "gpio34", "gpio35"; - function = "gsbi8"; - }; - - tx { - pins = "gpio34"; - drive-strength = <4>; - bias-disable; - }; - - rx { - pins = "gpio35"; - drive-strength = <2>; - bias-pull-up; - }; - }; - }; diff --git a/dts/Bindings/pinctrl/qcom,mdm9615-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,mdm9615-pinctrl.yaml new file mode 100644 index 0000000000..299e0b4b0a --- /dev/null +++ b/dts/Bindings/pinctrl/qcom,mdm9615-pinctrl.yaml @@ -0,0 +1,106 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,mdm9615-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. MDM9615 TLMM block + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + +description: Top Level Mode Multiplexer pin controller in Qualcomm MDM9615 SoC. + +$ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,mdm9615-pinctrl + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-mdm9615-pinctrl-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-mdm9615-pinctrl-state" + additionalProperties: false + +$defs: + qcom-mdm9615-pinctrl-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + pattern: "^gpio([0-9]|[1-7][0-9]|8[0-7])$" + minItems: 1 + maxItems: 16 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ gpio, gsbi2_i2c, gsbi3, gsbi4, gsbi5_i2c, gsbi5_uart, + sdc2, ebi2_lcdc, ps_hold, prim_audio, sec_audio, cdc_mclk, ] + + required: + - pins + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@1000000 { + compatible = "qcom,mdm9615-pinctrl"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + gpio-ranges = <&msmgpio 0 0 88>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + gsbi3-state { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + function = "gsbi3"; + drive-strength = <8>; + bias-disable; + }; + + gsbi5-i2c-state { + sda-pins { + pins = "gpio16"; + function = "gsbi5_i2c"; + drive-strength = <8>; + bias-disable; + }; + + scl-pins { + pins = "gpio17"; + function = "gsbi5_i2c"; + drive-strength = <2>; + bias-disable; + }; + }; + }; diff --git a/dts/Bindings/pinctrl/qcom,msm8226-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,msm8226-pinctrl.yaml index 040d2ada36..68d3fa2105 100644 --- a/dts/Bindings/pinctrl/qcom,msm8226-pinctrl.yaml +++ b/dts/Bindings/pinctrl/qcom,msm8226-pinctrl.yaml @@ -9,9 +9,8 @@ title: Qualcomm Technologies, Inc. MSM8226 TLMM block maintainers: - Bjorn Andersson <bjorn.andersson@linaro.org> -description: | - This binding describes the Top Level Mode Multiplexer block found in the - MSM8226 platform. +description: + Top Level Mode Multiplexer pin controller in Qualcomm MSM8226 SoC. properties: compatible: @@ -22,37 +21,28 @@ properties: maxItems: 1 interrupts: - description: Specifies the TLMM summary IRQ - maxItems: 1 - - interrupt-controller: true - - '#interrupt-cells': - description: Specifies the PIN numbers and Flags, as defined in - include/dt-bindings/interrupt-controller/irq.h - const: 2 - - gpio-controller: true - - '#gpio-cells': - description: Specifying the pin number and flags, as defined in - include/dt-bindings/gpio/gpio.h - const: 2 - - gpio-ranges: maxItems: 1 gpio-reserved-ranges: maxItems: 1 -#PIN CONFIGURATION NODES patternProperties: - '-pins$': + "-state$": + oneOf: + - $ref: "#/$defs/qcom-msm8226-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-msm8226-tlmm-state" + additionalProperties: false + +$defs: + qcom-msm8226-tlmm-state: type: object description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. - $ref: "/schemas/pinctrl/pincfg-node.yaml" + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -61,7 +51,7 @@ patternProperties: subnode. items: oneOf: - - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-1][0-6])$" + - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9]|11[0-6])$" - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ] minItems: 1 maxItems: 36 @@ -71,62 +61,41 @@ patternProperties: Specify the alternative function to be configured for the specified pins. Functions are only valid for gpio pins. enum: [ gpio, cci_i2c0, blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim5, - blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c5, blsp_spi1, - blsp_spi2, blsp_spi3, blsp_spi5, blsp_uart1, blsp_uart2, - blsp_uart3, blsp_uart5, cam_mclk0, cam_mclk1, wlan ] - - drive-strength: - enum: [2, 4, 6, 8, 10, 12, 14, 16] - default: 2 - description: - Selects the drive strength for the specified pins, in mA. - - bias-pull-down: true - - bias-pull-up: true - - bias-disable: true - - output-high: true - - output-low: true + blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_i2c5, blsp_i2c6, + blsp_spi1, blsp_spi2, blsp_spi3, blsp_spi5, blsp_uart1, blsp_uart2, + blsp_uart3, blsp_uart4, blsp_uart5, cam_mclk0, cam_mclk1, + gp0_clk, gp1_clk, sdc3, wlan ] required: - pins - - function - additionalProperties: false +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# required: - compatible - reg - - interrupts - - interrupt-controller - - '#interrupt-cells' - - gpio-controller - - '#gpio-cells' - - gpio-ranges -additionalProperties: false +unevaluatedProperties: false examples: - | - #include <dt-bindings/interrupt-controller/arm-gic.h> - msmgpio: pinctrl@fd510000 { - compatible = "qcom,msm8226-pinctrl"; - reg = <0xfd510000 0x4000>; - - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&msmgpio 0 0 117>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - - serial-pins { - pins = "gpio8", "gpio9"; - function = "blsp_uart3"; - drive-strength = <8>; - bias-disable; - }; + #include <dt-bindings/interrupt-controller/arm-gic.h> + msmgpio: pinctrl@fd510000 { + compatible = "qcom,msm8226-pinctrl"; + reg = <0xfd510000 0x4000>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&msmgpio 0 0 117>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + + serial-state { + pins = "gpio8", "gpio9"; + function = "blsp_uart3"; + drive-strength = <8>; + bias-disable; }; + }; diff --git a/dts/Bindings/pinctrl/qcom,msm8660-pinctrl.txt b/dts/Bindings/pinctrl/qcom,msm8660-pinctrl.txt deleted file mode 100644 index f095209848..0000000000 --- a/dts/Bindings/pinctrl/qcom,msm8660-pinctrl.txt +++ /dev/null @@ -1,96 +0,0 @@ -Qualcomm MSM8660 TLMM block - -Required properties: -- compatible: "qcom,msm8660-pinctrl" -- reg: Should be the base address and length of the TLMM block. -- interrupts: Should be the parent IRQ of the TLMM block. -- interrupt-controller: Marks the device node as an interrupt controller. -- #interrupt-cells: Should be two. -- gpio-controller: Marks the device node as a GPIO controller. -- #gpio-cells : Should be two. - The first cell is the gpio pin number and the - second cell is used for optional parameters. -- gpio-ranges: see ../gpio/gpio.txt - -Optional properties: - -- gpio-reserved-ranges: see ../gpio/gpio.txt - -Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for -a general description of GPIO and interrupt bindings. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -Qualcomm's pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, drive strength, etc. - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pin configuration subnode: - - pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength, - output-low, output-high. - -Non-empty subnodes must specify the 'pins' property. - -Valid values for pins are: - gpio0-gpio172, sdc3_clk, sdc3_cmd, sdc3_data sdc4_clk, sdc4_cmd, sdc4_data - -Valid values for function are: - gpio, cam_mclk, dsub, ext_gps, gp_clk_0a, gp_clk_0b, gp_clk_1a, gp_clk_1b, - gp_clk_2a, gp_clk_2b, gp_mn, gsbi1, gsbi1_spi_cs1_n, gsbi1_spi_cs2a_n, - gsbi1_spi_cs2b_n, gsbi1_spi_cs3_n, gsbi2, gsbi2_spi_cs1_n, gsbi2_spi_cs2_n, - gsbi2_spi_cs3_n, gsbi3, gsbi3_spi_cs1_n, gsbi3_spi_cs2_n, gsbi3_spi_cs3_n, - gsbi4, gsbi5, gsbi6, gsbi7, gsbi8, gsbi9, gsbi10, gsbi11, gsbi12, hdmi, i2s, - lcdc, mdp_vsync, mi2s, pcm, ps_hold, sdc1, sdc2, sdc5, tsif1, tsif2, usb_fs1, - usb_fs1_oe_n, usb_fs2, usb_fs2_oe_n, vfe, vsens_alarm, ebi2, ebi2cs - -Example: - - msmgpio: pinctrl@800000 { - compatible = "qcom,msm8660-pinctrl"; - reg = <0x800000 0x4000>; - - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&msmgpio 0 0 173>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <0 16 0x4>; - - pinctrl-names = "default"; - pinctrl-0 = <&gsbi12_uart>; - - gsbi12_uart: gsbi12-uart { - mux { - pins = "gpio117", "gpio118"; - function = "gsbi12"; - }; - - tx { - pins = "gpio118"; - drive-strength = <8>; - bias-disable; - }; - - rx { - pins = "gpio117"; - drive-strength = <2>; - bias-pull-up; - }; - }; - }; diff --git a/dts/Bindings/pinctrl/qcom,msm8660-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,msm8660-pinctrl.yaml new file mode 100644 index 0000000000..61f5be21f3 --- /dev/null +++ b/dts/Bindings/pinctrl/qcom,msm8660-pinctrl.yaml @@ -0,0 +1,110 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,msm8660-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm MSM8660 TLMM pin controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm MSM8660 SoC. + +properties: + compatible: + const: qcom,msm8660-pinctrl + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-reserved-ranges: + minItems: 1 + maxItems: 86 + + gpio-line-names: + maxItems: 173 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-msm8660-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-msm8660-tlmm-state" + additionalProperties: false + +$defs: + qcom-msm8660-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-6][0-9]|17[0-2])$" + - enum: [ sdc3_clk, sdc3_cmd, sdc3_data, sdc4_clk, sdc4_cmd, sdc4_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ gpio, cam_mclk, dsub, ext_gps, gp_clk_0a, gp_clk_0b, gp_clk_1a, + gp_clk_1b, gp_clk_2a, gp_clk_2b, gp_mn, gsbi1, gsbi1_spi_cs1_n, + gsbi1_spi_cs2a_n, gsbi1_spi_cs2b_n, gsbi1_spi_cs3_n, gsbi2, + gsbi2_spi_cs1_n, gsbi2_spi_cs2_n, gsbi2_spi_cs3_n, gsbi3, + gsbi3_spi_cs1_n, gsbi3_spi_cs2_n, gsbi3_spi_cs3_n, gsbi4, + gsbi5, gsbi6, gsbi7, gsbi8, gsbi9, gsbi10, gsbi11, gsbi12, + hdmi, i2s, lcdc, mdp_vsync, mi2s, pcm, ps_hold, sdc1, sdc2, + sdc5, tsif1, tsif2, usb_fs1, usb_fs1_oe_n, usb_fs2, + usb_fs2_oe_n, vfe, vsens_alarm, ebi2, ebi2cs ] + + required: + - pins + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@800000 { + compatible = "qcom,msm8660-pinctrl"; + reg = <0x800000 0x4000>; + + gpio-controller; + gpio-ranges = <&tlmm 0 0 173>; + #gpio-cells = <2>; + interrupts = <0 16 0x4>; + interrupt-controller; + #interrupt-cells = <2>; + + gsbi3-i2c-state { + pins = "gpio43", "gpio44"; + function = "gsbi3"; + drive-strength = <8>; + bias-disable; + }; + }; diff --git a/dts/Bindings/pinctrl/qcom,msm8909-tlmm.yaml b/dts/Bindings/pinctrl/qcom,msm8909-tlmm.yaml new file mode 100644 index 0000000000..295dd5fcf4 --- /dev/null +++ b/dts/Bindings/pinctrl/qcom,msm8909-tlmm.yaml @@ -0,0 +1,138 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,msm8909-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. MSM8909 TLMM block + +maintainers: + - Stephan Gerhold <stephan@gerhold.net> + +description: | + Top Level Mode Multiplexer pin controller in Qualcomm MSM8909 SoC. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,msm8909-tlmm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-reserved-ranges: true + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-msm8909-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-msm8909-tlmm-state" + additionalProperties: false + +$defs: + qcom-msm8909-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9]|11[0-2])$" + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, + sdc2_data, qdsd_clk, qdsd_cmd, qdsd_data0, qdsd_data1, + qdsd_data2, qdsd_data3 ] + minItems: 1 + maxItems: 16 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + enum: [ adsp_ext, atest_bbrx0, atest_bbrx1, atest_char, atest_char0, + atest_char1, atest_char2, atest_char3, atest_combodac, + atest_gpsadc0, atest_gpsadc1, atest_wlan0, atest_wlan1, + bimc_dte0, bimc_dte1, blsp_i2c1, blsp_i2c2, blsp_i2c3, + blsp_i2c4, blsp_i2c5, blsp_i2c6, blsp_spi1, blsp_spi1_cs1, + blsp_spi1_cs2, blsp_spi1_cs3, blsp_spi2, blsp_spi2_cs1, + blsp_spi2_cs2, blsp_spi2_cs3, blsp_spi3, blsp_spi3_cs1, + blsp_spi3_cs2, blsp_spi3_cs3, blsp_spi4, blsp_spi5, blsp_spi6, + blsp_uart1, blsp_uart2, blsp_uim1, blsp_uim2, cam_mclk, + cci_async, cci_timer0, cci_timer1, cci_timer2, cdc_pdm0, + dbg_out, dmic0_clk, dmic0_data, ebi0_wrcdc, ebi2_a, ebi2_lcd, + ext_lpass, gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a, + gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b, gcc_plltest, gpio, + gsm0_tx, ldo_en, ldo_update, m_voc, mdp_vsync, modem_tsync, + nav_pps, nav_tsync, pa_indicator, pbs0, pbs1, pbs2, + pri_mi2s_data0_a, pri_mi2s_data0_b, pri_mi2s_data1_a, + pri_mi2s_data1_b, pri_mi2s_mclk_a, pri_mi2s_mclk_b, + pri_mi2s_sck_a, pri_mi2s_sck_b, pri_mi2s_ws_a, pri_mi2s_ws_b, + prng_rosc, pwr_crypto_enabled_a, pwr_crypto_enabled_b, + pwr_modem_enabled_a, pwr_modem_enabled_b, pwr_nav_enabled_a, + pwr_nav_enabled_b, qdss_cti_trig_in_a0, qdss_cti_trig_in_a1, + qdss_cti_trig_in_b0, qdss_cti_trig_in_b1, qdss_cti_trig_out_a0, + qdss_cti_trig_out_a1, qdss_cti_trig_out_b0, + qdss_cti_trig_out_b1, qdss_traceclk_a, qdss_tracectl_a, + qdss_tracedata_a, qdss_tracedata_b, sd_write, sec_mi2s, + smb_int, ssbi0, ssbi1, uim1_clk, uim1_data, uim1_present, + uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset, + uim3_clk, uim3_data, uim3_present, uim3_reset, uim_batt, + wcss_bt, wcss_fm, wcss_wlan ] + + required: + - pins + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + pinctrl@1000000 { + compatible = "qcom,msm8909-tlmm"; + reg = <0x1000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 113>; + interrupt-controller; + #interrupt-cells = <2>; + + gpio-wo-subnode-state { + pins = "gpio1"; + function = "gpio"; + }; + + uart-w-subnodes-state { + rx-pins { + pins = "gpio4"; + function = "blsp_uart1"; + bias-pull-up; + }; + + tx-pins { + pins = "gpio5"; + function = "blsp_uart1"; + bias-disable; + }; + }; + }; +... diff --git a/dts/Bindings/pinctrl/qcom,msm8916-pinctrl.txt b/dts/Bindings/pinctrl/qcom,msm8916-pinctrl.txt deleted file mode 100644 index 3354a63296..0000000000 --- a/dts/Bindings/pinctrl/qcom,msm8916-pinctrl.txt +++ /dev/null @@ -1,195 +0,0 @@ -Qualcomm MSM8916 TLMM block - -This binding describes the Top Level Mode Multiplexer block found in the -MSM8916 platform. - -- compatible: - Usage: required - Value type: <string> - Definition: must be "qcom,msm8916-pinctrl" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: the base address and size of the TLMM register space. - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify the TLMM summary IRQ. - -- interrupt-controller: - Usage: required - Value type: <none> - Definition: identifies this node as an interrupt controller - -- #interrupt-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/interrupt-controller/irq.h> - -- gpio-controller: - Usage: required - Value type: <none> - Definition: identifies this node as a gpio controller - -- #gpio-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/gpio/gpio.h> - -- gpio-ranges: - Usage: required - Definition: see ../gpio/gpio.txt - -- gpio-reserved-ranges: - Usage: optional - Definition: see ../gpio/gpio.txt - -Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for -a general description of GPIO and interrupt bindings. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -The pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, drive strength, etc. - - -PIN CONFIGURATION NODES: - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pin configuration subnode: - -- pins: - Usage: required - Value type: <string-array> - Definition: List of gpio pins affected by the properties specified in - this subnode. Valid pins are: - gpio0-gpio121, - sdc1_clk, - sdc1_cmd, - sdc1_data - sdc2_clk, - sdc2_cmd, - sdc2_data, - qdsd_cmd, - qdsd_data0, - qdsd_data1, - qdsd_data2, - qdsd_data3 - -- function: - Usage: required - Value type: <string> - Definition: Specify the alternative function to be configured for the - specified pins. Functions are only valid for gpio pins. - Valid values are: - adsp_ext, alsp_int, atest_bbrx0, atest_bbrx1, atest_char, atest_char0, - atest_char1, atest_char2, atest_char3, atest_combodac, atest_gpsadc0, - atest_gpsadc1, atest_tsens, atest_wlan0, atest_wlan1, backlight_en, - bimc_dte0,bimc_dte1, blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, - blsp_i2c5, blsp_i2c6, blsp_spi1, blsp_spi1_cs1, blsp_spi1_cs2, - blsp_spi1_cs3, blsp_spi2, blsp_spi2_cs1, blsp_spi2_cs2, blsp_spi2_cs3, - blsp_spi3, blsp_spi3_cs1, blsp_spi3_cs2, blsp_spi3_cs3, blsp_spi4, - blsp_spi5, blsp_spi6, blsp_uart1, blsp_uart2, blsp_uim1, blsp_uim2, - cam1_rst, cam1_standby, cam_mclk0, cam_mclk1, cci_async, cci_i2c, - cci_timer0, cci_timer1, cci_timer2, cdc_pdm0, codec_mad, dbg_out, - display_5v, dmic0_clk, dmic0_data, dsi_rst, ebi0_wrcdc, euro_us, - ext_lpass, flash_strobe, gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a, - gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b, gpio, gsm0_tx0, gsm0_tx1, - gsm1_tx0, gsm1_tx1, gyro_accl, kpsns0, kpsns1, kpsns2, ldo_en, - ldo_update, mag_int, mdp_vsync, modem_tsync, m_voc, nav_pps, nav_tsync, - pa_indicator, pbs0, pbs1, pbs2, pri_mi2s, pri_mi2s_ws, prng_rosc, - pwr_crypto_enabled_a, pwr_crypto_enabled_b, pwr_modem_enabled_a, - pwr_modem_enabled_b, pwr_nav_enabled_a, pwr_nav_enabled_b, - qdss_ctitrig_in_a0, qdss_ctitrig_in_a1, qdss_ctitrig_in_b0, - qdss_ctitrig_in_b1, qdss_ctitrig_out_a0, qdss_ctitrig_out_a1, - qdss_ctitrig_out_b0, qdss_ctitrig_out_b1, qdss_traceclk_a, - qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, qdss_tracedata_a, - qdss_tracedata_b, reset_n, sd_card, sd_write, sec_mi2s, smb_int, - ssbi_wtr0, ssbi_wtr1, uim1, uim2, uim3, uim_batt, wcss_bt, wcss_fm, - wcss_wlan, webcam1_rst - -- bias-disable: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as no pull. - -- bias-pull-down: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull down. - -- bias-pull-up: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull up. - -- output-high: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - high. - Not valid for sdc pins. - -- output-low: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - low. - Not valid for sdc pins. - -- drive-strength: - Usage: optional - Value type: <u32> - Definition: Selects the drive strength for the specified pins, in mA. - Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 - -Example: - - tlmm: pinctrl@1000000 { - compatible = "qcom,msm8916-pinctrl"; - reg = <0x1000000 0x300000>; - interrupts = <0 208 0>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&tlmm 0 0 122>; - interrupt-controller; - #interrupt-cells = <2>; - - uart2: uart2-default { - mux { - pins = "gpio4", "gpio5"; - function = "blsp_uart2"; - }; - - tx { - pins = "gpio4"; - drive-strength = <4>; - bias-disable; - }; - - rx { - pins = "gpio5"; - drive-strength = <2>; - bias-pull-up; - }; - }; - }; diff --git a/dts/Bindings/pinctrl/qcom,msm8916-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,msm8916-pinctrl.yaml new file mode 100644 index 0000000000..904af87f9e --- /dev/null +++ b/dts/Bindings/pinctrl/qcom,msm8916-pinctrl.yaml @@ -0,0 +1,152 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,msm8916-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm MSM8916 TLMM pin controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm MSM8916 SoC. + +properties: + compatible: + const: qcom,msm8916-pinctrl + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-reserved-ranges: + minItems: 1 + maxItems: 61 + + gpio-line-names: + maxItems: 122 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-msm8916-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-msm8916-tlmm-state" + additionalProperties: false + +$defs: + qcom-msm8916-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-1][0-9]|12[01])$" + - enum: [ qdsd_clk, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2, + qdsd_data3, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, + sdc2_cmd, sdc2_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ gpio, adsp_ext, alsp_int, atest_bbrx0, atest_bbrx1, atest_char, + atest_char0, atest_char1, atest_char2, atest_char3, + atest_combodac, atest_gpsadc0, atest_gpsadc1, atest_tsens, + atest_wlan0, atest_wlan1, backlight_en, bimc_dte0, bimc_dte1, + blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_i2c5, + blsp_i2c6, blsp_spi1, blsp_spi1_cs1, blsp_spi1_cs2, + blsp_spi1_cs3, blsp_spi2, blsp_spi2_cs1, blsp_spi2_cs2, + blsp_spi2_cs3, blsp_spi3, blsp_spi3_cs1, blsp_spi3_cs2, + blsp_spi3_cs3, blsp_spi4, blsp_spi5, blsp_spi6, blsp_uart1, + blsp_uart2, blsp_uim1, blsp_uim2, cam1_rst, cam1_standby, + cam_mclk0, cam_mclk1, cci_async, cci_i2c, cci_timer0, + cci_timer1, cci_timer2, cdc_pdm0, codec_mad, dbg_out, + display_5v, dmic0_clk, dmic0_data, dsi_rst, ebi0_wrcdc, + euro_us, ext_lpass, flash_strobe, gcc_gp1_clk_a, gcc_gp1_clk_b, + gcc_gp2_clk_a, gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b, + gsm0_tx0, gsm0_tx1, gsm1_tx0, gsm1_tx1, gyro_accl, kpsns0, + kpsns1, kpsns2, ldo_en, ldo_update, mag_int, mdp_vsync, + modem_tsync, m_voc, nav_pps, nav_tsync, pa_indicator, pbs0, + pbs1, pbs2, pri_mi2s, pri_mi2s_ws, prng_rosc, + pwr_crypto_enabled_a, pwr_crypto_enabled_b, + pwr_modem_enabled_a, pwr_modem_enabled_b, pwr_nav_enabled_a, + pwr_nav_enabled_b, qdss_ctitrig_in_a0, qdss_ctitrig_in_a1, + qdss_ctitrig_in_b0, qdss_ctitrig_in_b1, qdss_ctitrig_out_a0, + qdss_ctitrig_out_a1, qdss_ctitrig_out_b0, qdss_ctitrig_out_b1, + qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a, + qdss_tracectl_b, qdss_tracedata_a, qdss_tracedata_b, reset_n, + sd_card, sd_write, sec_mi2s, smb_int, ssbi_wtr0, ssbi_wtr1, + uim1, uim2, uim3, uim_batt, wcss_bt, wcss_fm, wcss_wlan, + webcam1_rst ] + + required: + - pins + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + msmgpio: pinctrl@1000000 { + compatible = "qcom,msm8916-pinctrl"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + gpio-ranges = <&msmgpio 0 0 122>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + blsp1-uart2-sleep-state { + pins = "gpio4", "gpio5"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; + }; + + spi1-default-state { + spi-pins { + pins = "gpio0", "gpio1", "gpio3"; + function = "blsp_spi1"; + + drive-strength = <12>; + bias-disable; + }; + + cs-pins { + pins = "gpio2"; + function = "gpio"; + + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + }; diff --git a/dts/Bindings/pinctrl/qcom,msm8953-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,msm8953-pinctrl.yaml index abe9f4c9b1..8a3a962f6c 100644 --- a/dts/Bindings/pinctrl/qcom,msm8953-pinctrl.yaml +++ b/dts/Bindings/pinctrl/qcom,msm8953-pinctrl.yaml @@ -9,9 +9,8 @@ title: Qualcomm Technologies, Inc. MSM8953 TLMM block maintainers: - Bjorn Andersson <bjorn.andersson@linaro.org> -description: | - This binding describes the Top Level Mode Multiplexer block found in the - MSM8953 platform. +description: + Top Level Mode Multiplexer pin controller in Qualcomm MSM8953 SoC. properties: compatible: @@ -21,35 +20,27 @@ properties: maxItems: 1 interrupts: - description: Specifies the TLMM summary IRQ maxItems: 1 - interrupt-controller: true + gpio-reserved-ranges: true - '#interrupt-cells': - description: - Specifies the PIN numbers and Flags, as defined in defined in - include/dt-bindings/interrupt-controller/irq.h - const: 2 - - gpio-controller: true - - '#gpio-cells': - description: Specifying the pin number and flags, as defined in - include/dt-bindings/gpio/gpio.h - const: 2 - - gpio-ranges: - maxItems: 1 - -#PIN CONFIGURATION NODES patternProperties: - '-pins$': + "-state$": + oneOf: + - $ref: "#/$defs/qcom-msm8953-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-msm8953-tlmm-state" + additionalProperties: false + +$defs: + qcom-msm8953-tlmm-state: type: object description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. - $ref: "/schemas/pinctrl/pincfg-node.yaml" + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -58,7 +49,7 @@ patternProperties: subnode. items: oneOf: - - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9])$" + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-3][0-9]|14[01])$" - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, sdc2_clk, sdc2_cmd, sdc2_data, qdsd_clk, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2, qdsd_data3 ] @@ -111,57 +102,35 @@ patternProperties: uim_batt, us_emitter, us_euro, wcss_bt, wcss_fm, wcss_wlan, wcss_wlan0, wcss_wlan1, wcss_wlan2, wsa_en, wsa_io, wsa_irq ] - drive-strength: - enum: [2, 4, 6, 8, 10, 12, 14, 16] - default: 2 - description: - Selects the drive strength for the specified pins, in mA. - - bias-pull-down: true - - bias-pull-up: true - - bias-disable: true - - output-high: true - - output-low: true - required: - pins - - function - additionalProperties: false +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# required: - compatible - reg - - interrupts - - interrupt-controller - - '#interrupt-cells' - - gpio-controller - - '#gpio-cells' - - gpio-ranges -additionalProperties: false +unevaluatedProperties: false examples: - | - #include <dt-bindings/interrupt-controller/arm-gic.h> - tlmm: pinctrl@1000000 { - compatible = "qcom,msm8953-pinctrl"; - reg = <0x01000000 0x300000>; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&tlmm 0 0 142>; - - serial_default: serial-pins { - pins = "gpio4", "gpio5"; - function = "blsp_uart2"; - drive-strength = <2>; - bias-disable; - }; + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@1000000 { + compatible = "qcom,msm8953-pinctrl"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 142>; + + serial_default: serial-state { + pins = "gpio4", "gpio5"; + function = "blsp_uart2"; + drive-strength = <2>; + bias-disable; }; + }; diff --git a/dts/Bindings/pinctrl/qcom,msm8960-pinctrl.txt b/dts/Bindings/pinctrl/qcom,msm8960-pinctrl.txt deleted file mode 100644 index a7dd213c77..0000000000 --- a/dts/Bindings/pinctrl/qcom,msm8960-pinctrl.txt +++ /dev/null @@ -1,190 +0,0 @@ -Qualcomm MSM8960 TLMM block - -This binding describes the Top Level Mode Multiplexer block found in the -MSM8960 platform. - -- compatible: - Usage: required - Value type: <string> - Definition: must be "qcom,msm8960-pinctrl" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: the base address and size of the TLMM register space. - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify the TLMM summary IRQ. - -- interrupt-controller: - Usage: required - Value type: <none> - Definition: identifies this node as an interrupt controller - -- #interrupt-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/interrupt-controller/irq.h> - -- gpio-controller: - Usage: required - Value type: <none> - Definition: identifies this node as a gpio controller - -- #gpio-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/gpio/gpio.h> - -- gpio-ranges: - Usage: required - Definition: see ../gpio/gpio.txt - -- gpio-reserved-ranges: - Usage: optional - Definition: see ../gpio/gpio.txt - -Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for -a general description of GPIO and interrupt bindings. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -The pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, drive strength, etc. - - -PIN CONFIGURATION NODES: - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pin configuration subnode: - -- pins: - Usage: required - Value type: <string-array> - Definition: List of gpio pins affected by the properties specified in - this subnode. Valid pins are: - gpio0-gpio151, - sdc1_clk, - sdc1_cmd, - sdc1_data - sdc3_clk, - sdc3_cmd, - sdc3_data - -- function: - Usage: required - Value type: <string> - Definition: Specify the alternative function to be configured for the - specified pins. Functions are only valid for gpio pins. - Valid values are: - audio_pcm, bt, cam_mclk0, cam_mclk1, cam_mclk2, - codec_mic_i2s, codec_spkr_i2s, ext_gps, fm, gps_blanking, - gps_pps_in, gps_pps_out, gp_clk_0a, gp_clk_0b, gp_clk_1a, - gp_clk_1b, gp_clk_2a, gp_clk_2b, gp_mn, gp_pdm_0a, - gp_pdm_0b, gp_pdm_1a, gp_pdm_1b, gp_pdm_2a, gp_pdm_2b, gpio, - gsbi1, gsbi1_spi_cs1_n, gsbi1_spi_cs2a_n, gsbi1_spi_cs2b_n, - gsbi1_spi_cs3_n, gsbi2, gsbi2_spi_cs1_n, gsbi2_spi_cs2_n, - gsbi2_spi_cs3_n, gsbi3, gsbi4, gsbi4_3d_cam_i2c_l, - gsbi4_3d_cam_i2c_r, gsbi5, gsbi5_3d_cam_i2c_l, - gsbi5_3d_cam_i2c_r, gsbi6, gsbi7, gsbi8, gsbi9, gsbi10, - gsbi11, gsbi11_spi_cs1a_n, gsbi11_spi_cs1b_n, - gsbi11_spi_cs2a_n, gsbi11_spi_cs2b_n, gsbi11_spi_cs3_n, - gsbi12, hdmi_cec, hdmi_ddc_clock, hdmi_ddc_data, - hdmi_hot_plug_detect, hsic, mdp_vsync, mi2s, mic_i2s, - pmb_clk, pmb_ext_ctrl, ps_hold, rpm_wdog, sdc2, sdc4, sdc5, - slimbus1, slimbus2, spkr_i2s, ssbi1, ssbi2, ssbi_ext_gps, - ssbi_pmic2, ssbi_qpa1, ssbi_ts, tsif1, tsif2, ts_eoc, - usb_fs1, usb_fs1_oe, usb_fs1_oe_n, usb_fs2, usb_fs2_oe, - usb_fs2_oe_n, vfe_camif_timer1_a, vfe_camif_timer1_b, - vfe_camif_timer2, vfe_camif_timer3_a, vfe_camif_timer3_b, - vfe_camif_timer4_a, vfe_camif_timer4_b, vfe_camif_timer4_c, - vfe_camif_timer5_a, vfe_camif_timer5_b, vfe_camif_timer6_a, - vfe_camif_timer6_b, vfe_camif_timer6_c, vfe_camif_timer7_a, - vfe_camif_timer7_b, vfe_camif_timer7_c, wlan - -- bias-disable: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as no pull. - -- bias-pull-down: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull down. - -- bias-pull-up: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull up. - -- output-high: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - high. - Not valid for sdc pins. - -- output-low: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - low. - Not valid for sdc pins. - -- drive-strength: - Usage: optional - Value type: <u32> - Definition: Selects the drive strength for the specified pins, in mA. - Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 - -Example: - - msmgpio: pinctrl@800000 { - compatible = "qcom,msm8960-pinctrl"; - reg = <0x800000 0x4000>; - - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&msmgpio 0 0 152>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <0 16 0x4>; - - gsbi8_uart: gsbi8-uart { - mux { - pins = "gpio34", "gpio35"; - function = "gsbi8"; - }; - - tx { - pins = "gpio34"; - drive-strength = <4>; - bias-disable; - }; - - rx { - pins = "gpio35"; - drive-strength = <2>; - bias-pull-up; - }; - }; - }; diff --git a/dts/Bindings/pinctrl/qcom,msm8960-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,msm8960-pinctrl.yaml new file mode 100644 index 0000000000..46618740bd --- /dev/null +++ b/dts/Bindings/pinctrl/qcom,msm8960-pinctrl.yaml @@ -0,0 +1,150 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,msm8960-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm MSM8960 TLMM pin controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm MSM8960 SoC. + +properties: + compatible: + const: qcom,msm8960-pinctrl + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-reserved-ranges: + minItems: 1 + maxItems: 76 + + gpio-line-names: + maxItems: 152 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-msm8960-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-msm8960-tlmm-state" + additionalProperties: false + +$defs: + qcom-msm8960-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9]|15[0-1])$" + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc3_clk, sdc3_cmd, + sdc3_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ gpio, audio_pcm, bt, cam_mclk0, cam_mclk1, cam_mclk2, + codec_mic_i2s, codec_spkr_i2s, ext_gps, fm, gps_blanking, + gps_pps_in, gps_pps_out, gp_clk_0a, gp_clk_0b, gp_clk_1a, + gp_clk_1b, gp_clk_2a, gp_clk_2b, gp_mn, gp_pdm_0a, gp_pdm_0b, + gp_pdm_1a, gp_pdm_1b, gp_pdm_2a, gp_pdm_2b, gsbi1, + gsbi1_spi_cs1_n, gsbi1_spi_cs2a_n, gsbi1_spi_cs2b_n, + gsbi1_spi_cs3_n, gsbi2, gsbi2_spi_cs1_n, gsbi2_spi_cs2_n, + gsbi2_spi_cs3_n, gsbi3, gsbi4, gsbi4_3d_cam_i2c_l, + gsbi4_3d_cam_i2c_r, gsbi5, gsbi5_3d_cam_i2c_l, + gsbi5_3d_cam_i2c_r, gsbi6, gsbi7, gsbi8, gsbi9, gsbi10, gsbi11, + gsbi11_spi_cs1a_n, gsbi11_spi_cs1b_n, gsbi11_spi_cs2a_n, + gsbi11_spi_cs2b_n, gsbi11_spi_cs3_n, gsbi12, hdmi_cec, + hdmi_ddc_clock, hdmi_ddc_data, hdmi_hot_plug_detect, hsic, + mdp_vsync, mi2s, mic_i2s, pmb_clk, pmb_ext_ctrl, ps_hold, + rpm_wdog, sdc2, sdc4, sdc5, slimbus1, slimbus2, spkr_i2s, + ssbi1, ssbi2, ssbi_ext_gps, ssbi_pmic2, ssbi_qpa1, ssbi_ts, + tsif1, tsif2, ts_eoc, usb_fs1, usb_fs1_oe, usb_fs1_oe_n, + usb_fs2, usb_fs2_oe, usb_fs2_oe_n, vfe_camif_timer1_a, + vfe_camif_timer1_b, vfe_camif_timer2, vfe_camif_timer3_a, + vfe_camif_timer3_b, vfe_camif_timer4_a, vfe_camif_timer4_b, + vfe_camif_timer4_c, vfe_camif_timer5_a, vfe_camif_timer5_b, + vfe_camif_timer6_a, vfe_camif_timer6_b, vfe_camif_timer6_c, + vfe_camif_timer7_a, vfe_camif_timer7_b, vfe_camif_timer7_c, + wlan ] + + required: + - pins + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + msmgpio: pinctrl@800000 { + compatible = "qcom,msm8960-pinctrl"; + reg = <0x800000 0x4000>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&msmgpio 0 0 152>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + + spi1-default-state { + mosi-pins { + pins = "gpio6"; + function = "gsbi1"; + drive-strength = <12>; + bias-disable; + }; + + miso-pins { + pins = "gpio7"; + function = "gsbi1"; + drive-strength = <12>; + bias-disable; + }; + + cs-pins { + pins = "gpio8"; + function = "gpio"; + drive-strength = <12>; + bias-disable; + output-low; + }; + + clk-pins { + pins = "gpio9"; + function = "gsbi1"; + drive-strength = <12>; + bias-disable; + }; + }; + }; diff --git a/dts/Bindings/pinctrl/qcom,msm8974-pinctrl.txt b/dts/Bindings/pinctrl/qcom,msm8974-pinctrl.txt deleted file mode 100644 index 0040565066..0000000000 --- a/dts/Bindings/pinctrl/qcom,msm8974-pinctrl.txt +++ /dev/null @@ -1,121 +0,0 @@ -Qualcomm MSM8974 TLMM block - -Required properties: -- compatible: "qcom,msm8974-pinctrl" -- reg: Should be the base address and length of the TLMM block. -- interrupts: Should be the parent IRQ of the TLMM block. -- interrupt-controller: Marks the device node as an interrupt controller. -- #interrupt-cells: Should be two. -- gpio-controller: Marks the device node as a GPIO controller. -- #gpio-cells : Should be two. - The first cell is the gpio pin number and the - second cell is used for optional parameters. -- gpio-ranges: see ../gpio/gpio.txt - -Optional properties: - -- gpio-reserved-ranges: see ../gpio/gpio.txt - -Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for -a general description of GPIO and interrupt bindings. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -Qualcomm's pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, drive strength, etc. - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pin configuration subnode: - pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength. - -Non-empty subnodes must specify the 'pins' property. -Note that not all properties are valid for all pins. - - -Valid values for pins are: - gpio0-gpio145 - Supports mux, bias and drive-strength - - sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data - Supports bias and drive-strength - - hsic_data, hsic_strobe - Supports only mux - -Valid values for function are: - cci_i2c0, cci_i2c1, uim1, uim2, uim_batt_alarm, - blsp_uim1, blsp_uart1, blsp_i2c1, blsp_spi1, - blsp_uim2, blsp_uart2, blsp_i2c2, blsp_spi2, - blsp_uim3, blsp_uart3, blsp_i2c3, blsp_spi3, - blsp_uim4, blsp_uart4, blsp_i2c4, blsp_spi4, - blsp_uim5, blsp_uart5, blsp_i2c5, blsp_spi5, - blsp_uim6, blsp_uart6, blsp_i2c6, blsp_spi6, - blsp_uim7, blsp_uart7, blsp_i2c7, blsp_spi7, - blsp_uim8, blsp_uart8, blsp_i2c8, blsp_spi8, - blsp_uim9, blsp_uart9, blsp_i2c9, blsp_spi9, - blsp_uim10, blsp_uart10, blsp_i2c10, blsp_spi10, - blsp_uim11, blsp_uart11, blsp_i2c11, blsp_spi11, - blsp_uim12, blsp_uart12, blsp_i2c12, blsp_spi12, - blsp_spi1_cs1, blsp_spi2_cs2, blsp_spi_cs3, blsp_spi2_cs1, blsp_spi2_cs2 - blsp_spi2_cs3, blsp_spi10_cs1, blsp_spi10_cs2, blsp_spi10_cs3, - sdc3, sdc4, gcc_gp_clk1, gcc_gp_clk2, gcc_gp_clk3, cci_timer0, cci_timer1, - cci_timer2, cci_timer3, cci_async_in0, cci_async_in1, cci_async_in2, - cam_mckl0, cam_mclk1, cam_mclk2, cam_mclk3, mdp_vsync, hdmi_cec, hdmi_ddc, - hdmi_hpd, edp_hpd, gp_pdm0, gp_pdm1, gp_pdm2, gp_pdm3, gp0_clk, gp1_clk, - gp_mn, tsif1, tsif2, hsic, grfc, audio_ref_clk, qua_mi2s, pri_mi2s, spkr_mi2s, - ter_mi2s, sec_mi2s, bt, fm, wlan, slimbus, hsic_ctl, gpio - - (Note that this is not yet the complete list of functions) - - - -Example: - - msmgpio: pinctrl@fd510000 { - compatible = "qcom,msm8974-pinctrl"; - reg = <0xfd510000 0x4000>; - - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&msmgpio 0 0 146>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <0 208 0>; - - pinctrl-names = "default"; - pinctrl-0 = <&uart2_default>; - - uart2_default: uart2_default { - mux { - pins = "gpio4", "gpio5"; - function = "blsp_uart2"; - }; - - tx { - pins = "gpio4"; - drive-strength = <4>; - bias-disable; - }; - - rx { - pins = "gpio5"; - drive-strength = <2>; - bias-pull-up; - }; - }; - }; diff --git a/dts/Bindings/pinctrl/qcom,msm8974-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,msm8974-pinctrl.yaml new file mode 100644 index 0000000000..840fdaabde --- /dev/null +++ b/dts/Bindings/pinctrl/qcom,msm8974-pinctrl.yaml @@ -0,0 +1,165 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,msm8974-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm MSM8974 TLMM pin controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm MSM8974 SoC. + +properties: + compatible: + const: qcom,msm8974-pinctrl + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-reserved-ranges: + minItems: 1 + maxItems: 73 + + gpio-line-names: + maxItems: 146 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-msm8974-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-msm8974-tlmm-state" + additionalProperties: false + +$defs: + qcom-msm8974-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-3][0-9]|14[0-5])$" + - enum: [ hsic_data, hsic_strobe, sdc1_clk, sdc1_cmd, sdc1_data, + sdc2_clk, sdc2_cmd, sdc2_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ gpio, cci_i2c0, cci_i2c1, uim1, uim2, uim_batt_alarm, + blsp_uim1, blsp_uart1, blsp_i2c1, blsp_spi1, blsp_uim2, + blsp_uart2, blsp_i2c2, blsp_spi2, blsp_uim3, blsp_uart3, + blsp_i2c3, blsp_spi3, blsp_uim4, blsp_uart4, blsp_i2c4, + blsp_spi4, blsp_uim5, blsp_uart5, blsp_i2c5, blsp_spi5, + blsp_uim6, blsp_uart6, blsp_i2c6, blsp_spi6, blsp_uim7, + blsp_uart7, blsp_i2c7, blsp_spi7, blsp_uim8, blsp_uart8, + blsp_i2c8, blsp_spi8, blsp_uim9, blsp_uart9, blsp_i2c9, + blsp_spi9, blsp_uim10, blsp_uart10, blsp_i2c10, blsp_spi10, + blsp_uim11, blsp_uart11, blsp_i2c11, blsp_spi11, blsp_uim12, + blsp_uart12, blsp_i2c12, blsp_spi12, blsp_spi1_cs1, + blsp_spi2_cs2, blsp_spi_cs3, blsp_spi2_cs1, blsp_spi2_cs2 + blsp_spi2_cs3, blsp_spi10_cs1, blsp_spi10_cs2, blsp_spi10_cs3, + sdc3, sdc4, gcc_gp_clk1, gcc_gp_clk2, gcc_gp_clk3, cci_timer0, + cci_timer1, cci_timer2, cci_timer3, cci_async_in0, + cci_async_in1, cci_async_in2, cam_mckl0, cam_mclk1, cam_mclk2, + cam_mclk3, mdp_vsync, hdmi_cec, hdmi_ddc, hdmi_hpd, edp_hpd, + gp_pdm0, gp_pdm1, gp_pdm2, gp_pdm3, gp0_clk, gp1_clk, gp_mn, + tsif1, tsif2, hsic, grfc, audio_ref_clk, qua_mi2s, pri_mi2s, + spkr_mi2s, ter_mi2s, sec_mi2s, bt, fm, wlan, slimbus, hsic_ctl ] + + required: + - pins + + allOf: + - if: + properties: + pins: + contains: + enum: + - hsic_data + - hsic_strobe + required: + - pins + then: + properties: + bias-pull-down: false + bias-pull-up: false + bias-disable: false + drive-strength: false + input-enable: false + output-high: false + output-low: false + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@fd510000 { + compatible = "qcom,msm8974-pinctrl"; + reg = <0xfd510000 0x4000>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 146>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + + sdc1-off-state { + clk-pins { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd-pins { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data-pins { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + blsp2-uart1-sleep-state { + pins = "gpio41", "gpio42", "gpio43", "gpio44"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + hsic-state { + pins = "hsic_data", "hsic_strobe"; + }; + }; diff --git a/dts/Bindings/pinctrl/qcom,msm8976-pinctrl.txt b/dts/Bindings/pinctrl/qcom,msm8976-pinctrl.txt deleted file mode 100644 index 70d04d12f1..0000000000 --- a/dts/Bindings/pinctrl/qcom,msm8976-pinctrl.txt +++ /dev/null @@ -1,183 +0,0 @@ -Qualcomm MSM8976 TLMM block - -This binding describes the Top Level Mode Multiplexer block found in the -MSM8956 and MSM8976 platforms. - -- compatible: - Usage: required - Value type: <string> - Definition: must be "qcom,msm8976-pinctrl" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: the base address and size of the TLMM register space. - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify the TLMM summary IRQ. - -- interrupt-controller: - Usage: required - Value type: <none> - Definition: identifies this node as an interrupt controller - -- #interrupt-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/interrupt-controller/irq.h> - -- gpio-controller: - Usage: required - Value type: <none> - Definition: identifies this node as a gpio controller - -- #gpio-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/gpio/gpio.h> - -- gpio-ranges: - Usage: required - Definition: see ../gpio/gpio.txt - -- gpio-reserved-ranges: - Usage: optional - Definition: see ../gpio/gpio.txt - -Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for -a general description of GPIO and interrupt bindings. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -The pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, drive strength, etc. - - -PIN CONFIGURATION NODES: - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pin configuration subnode: - -- pins: - Usage: required - Value type: <string-array> - Definition: List of gpio pins affected by the properties specified in - this subnode. - - Valid pins are: - gpio0-gpio145 - Supports mux, bias and drive-strength - - sdc1_clk, sdc1_cmd, sdc1_data, - sdc2_clk, sdc2_cmd, sdc2_data, - sdc3_clk, sdc3_cmd, sdc3_data - Supports bias and drive-strength - -- function: - Usage: required - Value type: <string> - Definition: Specify the alternative function to be configured for the - specified pins. Functions are only valid for gpio pins. - Valid values are: - - gpio, blsp_uart1, blsp_spi1, smb_int, blsp_i2c1, blsp_spi2, - blsp_uart2, blsp_i2c2, gcc_gp1_clk_b, blsp_spi3, - qdss_tracedata_b, blsp_i2c3, gcc_gp2_clk_b, gcc_gp3_clk_b, - blsp_spi4, cap_int, blsp_i2c4, blsp_spi5, blsp_uart5, - qdss_traceclk_a, m_voc, blsp_i2c5, qdss_tracectl_a, - qdss_tracedata_a, blsp_spi6, blsp_uart6, qdss_tracectl_b, - blsp_i2c6, qdss_traceclk_b, mdp_vsync, pri_mi2s_mclk_a, - sec_mi2s_mclk_a, cam_mclk, cci0_i2c, cci1_i2c, blsp1_spi, - blsp3_spi, gcc_gp1_clk_a, gcc_gp2_clk_a, gcc_gp3_clk_a, - uim_batt, sd_write, uim1_data, uim1_clk, uim1_reset, - uim1_present, uim2_data, uim2_clk, uim2_reset, - uim2_present, ts_xvdd, mipi_dsi0, us_euro, ts_resout, - ts_sample, sec_mi2s_mclk_b, pri_mi2s, codec_reset, - cdc_pdm0, us_emitter, pri_mi2s_mclk_b, pri_mi2s_mclk_c, - lpass_slimbus, lpass_slimbus0, lpass_slimbus1, codec_int1, - codec_int2, wcss_bt, sdc3, wcss_wlan2, wcss_wlan1, - wcss_wlan0, wcss_wlan, wcss_fm, key_volp, key_snapshot, - key_focus, key_home, pwr_down, dmic0_clk, hdmi_int, - dmic0_data, wsa_vi, wsa_en, blsp_spi8, wsa_irq, blsp_i2c8, - pa_indicator, modem_tsync, ssbi_wtr1, gsm1_tx, gsm0_tx, - sdcard_det, sec_mi2s, ss_switch, - -- bias-disable: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as no pull. - -- bias-pull-down: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull down. - -- bias-pull-up: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull up. - -- output-high: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - high. - Not valid for sdc pins. - -- output-low: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - low. - Not valid for sdc pins. - -- drive-strength: - Usage: optional - Value type: <u32> - Definition: Selects the drive strength for the specified pins, in mA. - Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 - -Example: - - tlmm: pinctrl@1000000 { - compatible = "qcom,msm8976-pinctrl"; - reg = <0x1000000 0x300000>; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&tlmm 0 0 145>; - interrupt-controller; - #interrupt-cells = <2>; - - blsp1_uart2_active: blsp1_uart2_active { - mux { - pins = "gpio4", "gpio5", "gpio6", "gpio7"; - function = "blsp_uart2"; - }; - - config { - pins = "gpio4", "gpio5", "gpio6", "gpio7"; - drive-strength = <2>; - bias-disable; - }; - }; - }; diff --git a/dts/Bindings/pinctrl/qcom,msm8976-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,msm8976-pinctrl.yaml new file mode 100644 index 0000000000..d4391c194f --- /dev/null +++ b/dts/Bindings/pinctrl/qcom,msm8976-pinctrl.yaml @@ -0,0 +1,122 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,msm8976-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm MSM8976 TLMM pin controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm MSM8976 SoC. + +properties: + compatible: + const: qcom,msm8976-pinctrl + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-reserved-ranges: + minItems: 1 + maxItems: 73 + + gpio-line-names: + maxItems: 145 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-msm8976-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-msm8976-tlmm-state" + additionalProperties: false + +$defs: + qcom-msm8976-tlmm-state: + type: object + description: + Desired pin configuration for a device or its specific state (like sleep + or active). + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this state. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-3][0-9]|14[0-4])$" + - enum: [ qdsd_clk, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2, + qdsd_data3, sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, + sdc2_clk, sdc2_cmd, sdc2_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ gpio, blsp_uart1, blsp_spi1, smb_int, blsp_i2c1, blsp_spi2, + blsp_uart2, blsp_i2c2, gcc_gp1_clk_b, blsp_spi3, + qdss_tracedata_b, blsp_i2c3, gcc_gp2_clk_b, gcc_gp3_clk_b, + blsp_spi4, cap_int, blsp_i2c4, blsp_spi5, blsp_uart5, + qdss_traceclk_a, m_voc, blsp_i2c5, qdss_tracectl_a, + qdss_tracedata_a, blsp_spi6, blsp_uart6, qdss_tracectl_b, + blsp_i2c6, qdss_traceclk_b, mdp_vsync, pri_mi2s_mclk_a, + sec_mi2s_mclk_a, cam_mclk, cci0_i2c, cci1_i2c, blsp1_spi, + blsp3_spi, gcc_gp1_clk_a, gcc_gp2_clk_a, gcc_gp3_clk_a, + uim_batt, sd_write, uim1_data, uim1_clk, uim1_reset, + uim1_present, uim2_data, uim2_clk, uim2_reset, uim2_present, + ts_xvdd, mipi_dsi0, us_euro, ts_resout, ts_sample, + sec_mi2s_mclk_b, pri_mi2s, codec_reset, cdc_pdm0, us_emitter, + pri_mi2s_mclk_b, pri_mi2s_mclk_c, lpass_slimbus, + lpass_slimbus0, lpass_slimbus1, codec_int1, codec_int2, + wcss_bt, sdc3, wcss_wlan2, wcss_wlan1, wcss_wlan0, wcss_wlan, + wcss_fm, key_volp, key_snapshot, key_focus, key_home, pwr_down, + dmic0_clk, hdmi_int, dmic0_data, wsa_vi, wsa_en, blsp_spi8, + wsa_irq, blsp_i2c8, pa_indicator, modem_tsync, ssbi_wtr1, + gsm1_tx, gsm0_tx, sdcard_det, sec_mi2s, ss_switch ] + + required: + - pins + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + tlmm: pinctrl@1000000 { + compatible = "qcom,msm8976-pinctrl"; + reg = <0x1000000 0x300000>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 145>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + + blsp1-uart2-active-state { + pins = "gpio4", "gpio5", "gpio6", "gpio7"; + function = "blsp_uart2"; + drive-strength = <2>; + bias-disable; + }; + }; diff --git a/dts/Bindings/pinctrl/qcom,msm8994-pinctrl.txt b/dts/Bindings/pinctrl/qcom,msm8994-pinctrl.txt deleted file mode 100644 index da52df6273..0000000000 --- a/dts/Bindings/pinctrl/qcom,msm8994-pinctrl.txt +++ /dev/null @@ -1,186 +0,0 @@ -Qualcomm MSM8994 TLMM block - -This binding describes the Top Level Mode Multiplexer block found in the -MSM8994 platform. - -- compatible: - Usage: required - Value type: <string> - Definition: Should contain one of: - "qcom,msm8992-pinctrl", - "qcom,msm8994-pinctrl". - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: the base address and size of the TLMM register space. - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify the TLMM summary IRQ. - -- interrupt-controller: - Usage: required - Value type: <none> - Definition: identifies this node as an interrupt controller - -- #interrupt-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/interrupt-controller/irq.h> - -- gpio-controller: - Usage: required - Value type: <none> - Definition: identifies this node as a gpio controller - -- #gpio-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/gpio/gpio.h> - -- gpio-ranges: - Usage: required - Definition: see ../gpio/gpio.txt - -- gpio-reserved-ranges: - Usage: optional - Definition: see ../gpio/gpio.txt - -Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for -a general description of GPIO and interrupt bindings. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -The pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, drive strength, etc. - - -PIN CONFIGURATION NODES: - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pin configuration subnode: - -- pins: - Usage: required - Value type: <string-array> - Definition: List of gpio pins affected by the properties specified in - this subnode. - - Valid pins are: - gpio0-gpio145 - Supports mux, bias and drive-strength - - sdc1_clk, sdc1_cmd, sdc1_data sdc1_rclk, sdc2_clk, - sdc2_cmd, sdc2_data - Supports bias and drive-strength - -- function: - Usage: required - Value type: <string> - Definition: Specify the alternative function to be configured for the - specified pins. Functions are only valid for gpio pins. - Valid values are: - - audio_ref_clk, blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_i2c5, - blsp_i2c6, blsp_i2c7, blsp_i2c8, blsp_i2c9, blsp_i2c10, blsp_i2c11, - blsp_i2c12, blsp_spi1, blsp_spi1_cs1, blsp_spi1_cs2, blsp_spi1_cs3, - blsp_spi2, blsp_spi2_cs1, blsp_spi2_cs2, blsp_spi2_cs3, blsp_spi3, - blsp_spi4, blsp_spi5, blsp_spi6, blsp_spi7, blsp_spi8, blsp_spi9, - blsp_spi10, blsp_spi10_cs1, blsp_spi10_cs2, blsp_spi10_cs3, blsp_spi11, - blsp_spi12, blsp_uart1, blsp_uart2, blsp_uart3, blsp_uart4, blsp_uart5, - blsp_uart6, blsp_uart7, blsp_uart8, blsp_uart9, blsp_uart10, blsp_uart11, - blsp_uart12, blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim4, blsp_uim5, - blsp_uim6, blsp_uim7, blsp_uim8, blsp_uim9, blsp_uim10, blsp_uim11, - blsp_uim12, blsp11_i2c_scl_b, blsp11_i2c_sda_b, blsp11_uart_rx_b, - blsp11_uart_tx_b, cam_mclk0, cam_mclk1, cam_mclk2, cam_mclk3, - cci_async_in0, cci_async_in1, cci_async_in2, cci_i2c0, cci_i2c1, - cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, - gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a, gcc_gp2_clk_b, gcc_gp3_clk_a, - gcc_gp3_clk_b, gp_mn, gp_pdm0, gp_pdm1, gp_pdm2, gp0_clk, - gp1_clk, gps_tx, gsm_tx, hdmi_cec, hdmi_ddc, hdmi_hpd, hdmi_rcv, - mdp_vsync, mss_lte, nav_pps, nav_tsync, qdss_cti_trig_in_a, - qdss_cti_trig_in_b, qdss_cti_trig_in_c, qdss_cti_trig_in_d, - qdss_cti_trig_out_a, qdss_cti_trig_out_b, qdss_cti_trig_out_c, - qdss_cti_trig_out_d, qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a, - qdss_tracectl_b, qdss_tracedata_a, qdss_tracedata_b, qua_mi2s, pci_e0, - pci_e1, pri_mi2s, sdc4, sec_mi2s, slimbus, spkr_i2s, ter_mi2s, tsif1, - tsif2, uim_batt_alarm, uim1, uim2, uim3, uim4, gpio - -- bias-disable: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as no pull. - -- bias-pull-down: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull down. - -- bias-pull-up: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull up. - -- output-high: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - high. - Not valid for sdc pins. - -- output-low: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - low. - Not valid for sdc pins. - -- drive-strength: - Usage: optional - Value type: <u32> - Definition: Selects the drive strength for the specified pins, in mA. - Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 - -Example: - - msmgpio: pinctrl@fd510000 { - compatible = "qcom,msm8994-pinctrl"; - reg = <0xfd510000 0x4000>; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&msmgpio 0 0 146>; - interrupt-controller; - #interrupt-cells = <2>; - - blsp1_uart2_default: blsp1_uart2_default { - pinmux { - pins = "gpio4", "gpio5"; - function = "blsp_uart2"; - }; - pinconf { - pins = "gpio4", "gpio5"; - drive-strength = <16>; - bias-disable; - }; - }; - }; diff --git a/dts/Bindings/pinctrl/qcom,msm8994-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,msm8994-pinctrl.yaml new file mode 100644 index 0000000000..fa90981db4 --- /dev/null +++ b/dts/Bindings/pinctrl/qcom,msm8994-pinctrl.yaml @@ -0,0 +1,148 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,msm8994-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm MSM8994 TLMM pin controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm MSM8994 SoC. + +properties: + compatible: + enum: + - qcom,msm8992-pinctrl + - qcom,msm8994-pinctrl + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-reserved-ranges: + minItems: 1 + maxItems: 73 + + gpio-line-names: + maxItems: 146 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-msm8994-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-msm8994-tlmm-state" + additionalProperties: false + +$defs: + qcom-msm8994-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-3][0-9]|14[0-5])$" + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, sdc2_clk, + sdc2_cmd, sdc2_data, sdc3_clk, sdc3_cmd, sdc3_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ gpio, audio_ref_clk, blsp_i2c1, blsp_i2c2, blsp_i2c3, + blsp_i2c4, blsp_i2c5, blsp_i2c6, blsp_i2c7, blsp_i2c8, + blsp_i2c9, blsp_i2c10, blsp_i2c11, blsp_i2c12, blsp_spi1, + blsp_spi1_cs1, blsp_spi1_cs2, blsp_spi1_cs3, blsp_spi2, + blsp_spi2_cs1, blsp_spi2_cs2, blsp_spi2_cs3, blsp_spi3, + blsp_spi4, blsp_spi5, blsp_spi6, blsp_spi7, blsp_spi8, + blsp_spi9, blsp_spi10, blsp_spi10_cs1, blsp_spi10_cs2, + blsp_spi10_cs3, blsp_spi11, blsp_spi12, blsp_uart1, blsp_uart2, + blsp_uart3, blsp_uart4, blsp_uart5, blsp_uart6, blsp_uart7, + blsp_uart8, blsp_uart9, blsp_uart10, blsp_uart11, blsp_uart12, + blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim4, blsp_uim5, + blsp_uim6, blsp_uim7, blsp_uim8, blsp_uim9, blsp_uim10, + blsp_uim11, blsp_uim12, blsp11_i2c_scl_b, blsp11_i2c_sda_b, + blsp11_uart_rx_b, blsp11_uart_tx_b, cam_mclk0, cam_mclk1, + cam_mclk2, cam_mclk3, cci_async_in0, cci_async_in1, + cci_async_in2, cci_i2c0, cci_i2c1, cci_timer0, cci_timer1, + cci_timer2, cci_timer3, cci_timer4, gcc_gp1_clk_a, + gcc_gp1_clk_b, gcc_gp2_clk_a, gcc_gp2_clk_b, gcc_gp3_clk_a, + gcc_gp3_clk_b, gp_mn, gp_pdm0, gp_pdm1, gp_pdm2, gp0_clk, + gp1_clk, gps_tx, gsm_tx, hdmi_cec, hdmi_ddc, hdmi_hpd, + hdmi_rcv, mdp_vsync, mss_lte, nav_pps, nav_tsync, + qdss_cti_trig_in_a, qdss_cti_trig_in_b, qdss_cti_trig_in_c, + qdss_cti_trig_in_d, qdss_cti_trig_out_a, qdss_cti_trig_out_b, + qdss_cti_trig_out_c, qdss_cti_trig_out_d, qdss_traceclk_a, + qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, + qdss_tracedata_a, qdss_tracedata_b, qua_mi2s, pci_e0, pci_e1, + pri_mi2s, sdc4, sec_mi2s, slimbus, spkr_i2s, ter_mi2s, tsif1, + tsif2, uim_batt_alarm, uim1, uim2, uim3, uim4 ] + + required: + - pins + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + tlmm: pinctrl@fd510000 { + compatible = "qcom,msm8994-pinctrl"; + reg = <0xfd510000 0x4000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 146>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + blsp1-uart2-default-state { + function = "blsp_uart2"; + pins = "gpio4", "gpio5"; + drive-strength = <16>; + bias-disable; + }; + + blsp1-spi1-default-state { + default-pins { + pins = "gpio0", "gpio1", "gpio3"; + function = "blsp_spi1"; + drive-strength = <10>; + bias-pull-down; + }; + + cs-pins { + pins = "gpio8"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + }; diff --git a/dts/Bindings/pinctrl/qcom,msm8996-pinctrl.txt b/dts/Bindings/pinctrl/qcom,msm8996-pinctrl.txt deleted file mode 100644 index a56cb88283..0000000000 --- a/dts/Bindings/pinctrl/qcom,msm8996-pinctrl.txt +++ /dev/null @@ -1,208 +0,0 @@ -Qualcomm MSM8996 TLMM block - -This binding describes the Top Level Mode Multiplexer block found in the -MSM8996 platform. - -- compatible: - Usage: required - Value type: <string> - Definition: must be "qcom,msm8996-pinctrl" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: the base address and size of the TLMM register space. - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify the TLMM summary IRQ. - -- interrupt-controller: - Usage: required - Value type: <none> - Definition: identifies this node as an interrupt controller - -- #interrupt-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/interrupt-controller/irq.h> - -- gpio-controller: - Usage: required - Value type: <none> - Definition: identifies this node as a gpio controller - -- #gpio-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/gpio/gpio.h> - -- gpio-ranges: - Usage: required - Definition: see ../gpio/gpio.txt - -- gpio-reserved-ranges: - Usage: optional - Definition: see ../gpio/gpio.txt - -Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for -a general description of GPIO and interrupt bindings. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -The pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, drive strength, etc. - - -PIN CONFIGURATION NODES: - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pin configuration subnode: - -- pins: - Usage: required - Value type: <string-array> - Definition: List of gpio pins affected by the properties specified in - this subnode. - - Valid pins are: - gpio0-gpio149 - Supports mux, bias and drive-strength - - sdc1_clk, sdc1_cmd, sdc1_data sdc2_clk, sdc2_cmd, - sdc2_data sdc1_rclk - Supports bias and drive-strength - -- function: - Usage: required - Value type: <string> - Definition: Specify the alternative function to be configured for the - specified pins. Functions are only valid for gpio pins. - Valid values are: - - blsp_uart1, blsp_spi1, blsp_i2c1, blsp_uim1, atest_tsens, - bimc_dte1, dac_calib0, blsp_spi8, blsp_uart8, blsp_uim8, - qdss_cti_trig_out_b, bimc_dte0, dac_calib1, qdss_cti_trig_in_b, - dac_calib2, atest_tsens2, atest_usb1, blsp_spi10, blsp_uart10, - blsp_uim10, atest_bbrx1, atest_usb13, atest_bbrx0, atest_usb12, - mdp_vsync, edp_lcd, blsp_i2c10, atest_gpsadc1, atest_usb11, - atest_gpsadc0, edp_hot, atest_usb10, m_voc, dac_gpio, atest_char, - cam_mclk, pll_bypassnl, qdss_stm7, blsp_i2c8, qdss_tracedata_b, - pll_reset, qdss_stm6, qdss_stm5, qdss_stm4, atest_usb2, cci_i2c, - qdss_stm3, dac_calib3, atest_usb23, atest_char3, dac_calib4, - qdss_stm2, atest_usb22, atest_char2, qdss_stm1, dac_calib5, - atest_usb21, atest_char1, dbg_out, qdss_stm0, dac_calib6, - atest_usb20, atest_char0, dac_calib10, qdss_stm10, - qdss_cti_trig_in_a, cci_timer4, blsp_spi6, blsp_uart6, blsp_uim6, - blsp2_spi, qdss_stm9, qdss_cti_trig_out_a, dac_calib11, - qdss_stm8, cci_timer0, qdss_stm13, dac_calib7, cci_timer1, - qdss_stm12, dac_calib8, cci_timer2, blsp1_spi, qdss_stm11, - dac_calib9, cci_timer3, cci_async, dac_calib12, blsp_i2c6, - qdss_tracectl_a, dac_calib13, qdss_traceclk_a, dac_calib14, - dac_calib15, hdmi_rcv, dac_calib16, hdmi_cec, pwr_modem, - dac_calib17, hdmi_ddc, pwr_nav, dac_calib18, pwr_crypto, - dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0, - dac_calib22, dac_calib23, dac_calib24, tsif1_sync, dac_calib25, - sd_write, tsif1_error, blsp_spi2, blsp_uart2, blsp_uim2, - qdss_cti, blsp_i2c2, blsp_spi3, blsp_uart3, blsp_uim3, blsp_i2c3, - uim3, blsp_spi9, blsp_uart9, blsp_uim9, blsp10_spi, blsp_i2c9, - blsp_spi7, blsp_uart7, blsp_uim7, qdss_tracedata_a, blsp_i2c7, - qua_mi2s, gcc_gp1_clk_a, ssc_irq, uim4, blsp_spi11, blsp_uart11, - blsp_uim11, gcc_gp2_clk_a, gcc_gp3_clk_a, blsp_i2c11, cri_trng0, - cri_trng1, cri_trng, qdss_stm18, pri_mi2s, qdss_stm17, blsp_spi4, - blsp_uart4, blsp_uim4, qdss_stm16, qdss_stm15, blsp_i2c4, - qdss_stm14, dac_calib26, spkr_i2s, audio_ref, lpass_slimbus, - isense_dbg, tsense_pwm1, tsense_pwm2, btfm_slimbus, ter_mi2s, - qdss_stm22, qdss_stm21, qdss_stm20, qdss_stm19, gcc_gp1_clk_b, - sec_mi2s, blsp_spi5, blsp_uart5, blsp_uim5, gcc_gp2_clk_b, - gcc_gp3_clk_b, blsp_i2c5, blsp_spi12, blsp_uart12, blsp_uim12, - qdss_stm25, qdss_stm31, blsp_i2c12, qdss_stm30, qdss_stm29, - tsif1_clk, qdss_stm28, tsif1_en, tsif1_data, sdc4_cmd, qdss_stm27, - qdss_traceclk_b, tsif2_error, sdc43, vfr_1, qdss_stm26, tsif2_clk, - sdc4_clk, qdss_stm24, tsif2_en, sdc42, qdss_stm23, qdss_tracectl_b, - sd_card, tsif2_data, sdc41, tsif2_sync, sdc40, mdp_vsync_p_b, - ldo_en, mdp_vsync_s_b, ldo_update, blsp11_uart_tx_b, blsp11_uart_rx_b, - blsp11_i2c_sda_b, prng_rosc, blsp11_i2c_scl_b, uim2, uim1, uim_batt, - pci_e2, pa_indicator, adsp_ext, ddr_bist, qdss_tracedata_11, - qdss_tracedata_12, modem_tsync, nav_dr, nav_pps, pci_e1, gsm_tx, - qspi_cs, ssbi2, ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2, qspi3, - gpio - -- bias-disable: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as no pull. - -- bias-pull-down: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull down. - -- bias-pull-up: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull up. - -- output-high: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - high. - Not valid for sdc pins. - -- output-low: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - low. - Not valid for sdc pins. - -- drive-strength: - Usage: optional - Value type: <u32> - Definition: Selects the drive strength for the specified pins, in mA. - Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 - -Example: - - tlmm: pinctrl@1010000 { - compatible = "qcom,msm8996-pinctrl"; - reg = <0x01010000 0x300000>; - interrupts = <0 208 0>; - gpio-controller; - gpio-ranges = <&tlmm 0 0 150>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - - uart_console_active: uart_console_active { - mux { - pins = "gpio4", "gpio5"; - function = "blsp_uart8"; - }; - - config { - pins = "gpio4", "gpio5"; - drive-strength = <2>; - bias-disable; - }; - }; - }; diff --git a/dts/Bindings/pinctrl/qcom,msm8996-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,msm8996-pinctrl.yaml new file mode 100644 index 0000000000..c5010c175b --- /dev/null +++ b/dts/Bindings/pinctrl/qcom,msm8996-pinctrl.yaml @@ -0,0 +1,168 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,msm8996-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm MSM8996 TLMM pin controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm MSM8996 SoC. + +properties: + compatible: + const: qcom,msm8996-pinctrl + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-reserved-ranges: + minItems: 1 + maxItems: 75 + + gpio-line-names: + maxItems: 150 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-msm8996-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-msm8996-tlmm-state" + additionalProperties: false + +$defs: + qcom-msm8996-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9])$" + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, sdc2_clk, + sdc2_cmd, sdc2_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ gpio, blsp_uart1, blsp_spi1, blsp_i2c1, blsp_uim1, atest_tsens, + bimc_dte1, dac_calib0, blsp_spi8, blsp_uart8, blsp_uim8, + qdss_cti_trig_out_b, bimc_dte0, dac_calib1, qdss_cti_trig_in_b, + dac_calib2, atest_tsens2, atest_usb1, blsp_spi10, blsp_uart10, + blsp_uim10, atest_bbrx1, atest_usb13, atest_bbrx0, atest_usb12, + mdp_vsync, edp_lcd, blsp_i2c10, atest_gpsadc1, atest_usb11, + atest_gpsadc0, edp_hot, atest_usb10, m_voc, dac_gpio, + atest_char, cam_mclk, pll_bypassnl, qdss_stm7, blsp_i2c8, + qdss_tracedata_b, pll_reset, qdss_stm6, qdss_stm5, qdss_stm4, + atest_usb2, cci_i2c, qdss_stm3, dac_calib3, atest_usb23, + atest_char3, dac_calib4, qdss_stm2, atest_usb22, atest_char2, + qdss_stm1, dac_calib5, atest_usb21, atest_char1, dbg_out, + qdss_stm0, dac_calib6, atest_usb20, atest_char0, dac_calib10, + qdss_stm10, qdss_cti_trig_in_a, cci_timer4, blsp_spi6, + blsp_uart6, blsp_uim6, blsp2_spi, qdss_stm9, + qdss_cti_trig_out_a, dac_calib11, qdss_stm8, cci_timer0, + qdss_stm13, dac_calib7, cci_timer1, qdss_stm12, dac_calib8, + cci_timer2, blsp1_spi, qdss_stm11, dac_calib9, cci_timer3, + cci_async, dac_calib12, blsp_i2c6, qdss_tracectl_a, + dac_calib13, qdss_traceclk_a, dac_calib14, dac_calib15, + hdmi_rcv, dac_calib16, hdmi_cec, pwr_modem, dac_calib17, + hdmi_ddc, pwr_nav, dac_calib18, pwr_crypto, dac_calib19, + hdmi_hot, dac_calib20, dac_calib21, pci_e0, dac_calib22, + dac_calib23, dac_calib24, tsif1_sync, dac_calib25, sd_write, + tsif1_error, blsp_spi2, blsp_uart2, blsp_uim2, qdss_cti, + blsp_i2c2, blsp_spi3, blsp_uart3, blsp_uim3, blsp_i2c3, uim3, + blsp_spi9, blsp_uart9, blsp_uim9, blsp10_spi, blsp_i2c9, + blsp_spi7, blsp_uart7, blsp_uim7, qdss_tracedata_a, blsp_i2c7, + qua_mi2s, gcc_gp1_clk_a, ssc_irq, uim4, blsp_spi11, + blsp_uart11, blsp_uim11, gcc_gp2_clk_a, gcc_gp3_clk_a, + blsp_i2c11, cri_trng0, cri_trng1, cri_trng, qdss_stm18, + pri_mi2s, qdss_stm17, blsp_spi4, blsp_uart4, blsp_uim4, + qdss_stm16, qdss_stm15, blsp_i2c4, qdss_stm14, dac_calib26, + spkr_i2s, audio_ref, lpass_slimbus, isense_dbg, tsense_pwm1, + tsense_pwm2, btfm_slimbus, ter_mi2s, qdss_stm22, qdss_stm21, + qdss_stm20, qdss_stm19, gcc_gp1_clk_b, sec_mi2s, blsp_spi5, + blsp_uart5, blsp_uim5, gcc_gp2_clk_b, gcc_gp3_clk_b, blsp_i2c5, + blsp_spi12, blsp_uart12, blsp_uim12, qdss_stm25, qdss_stm31, + blsp_i2c12, qdss_stm30, qdss_stm29, tsif1_clk, qdss_stm28, + tsif1_en, tsif1_data, sdc4_cmd, qdss_stm27, qdss_traceclk_b, + tsif2_error, sdc43, vfr_1, qdss_stm26, tsif2_clk, sdc4_clk, + qdss_stm24, tsif2_en, sdc42, qdss_stm23, qdss_tracectl_b, + sd_card, tsif2_data, sdc41, tsif2_sync, sdc40, mdp_vsync_p_b, + ldo_en, mdp_vsync_s_b, ldo_update, blsp11_uart_tx_b, + blsp11_uart_rx_b, blsp11_i2c_sda_b, prng_rosc, + blsp11_i2c_scl_b, uim2, uim1, uim_batt, pci_e2, pa_indicator, + adsp_ext, ddr_bist, qdss_tracedata_11, qdss_tracedata_12, + modem_tsync, nav_dr, nav_pps, pci_e1, gsm_tx, qspi_cs, ssbi2, + ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2, qspi3 ] + + required: + - pins + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + tlmm: pinctrl@1010000 { + compatible = "qcom,msm8996-pinctrl"; + reg = <0x01010000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 150>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + blsp1-spi1-default-state { + spi-pins { + pins = "gpio0", "gpio1", "gpio3"; + function = "blsp_spi1"; + drive-strength = <12>; + bias-disable; + }; + + cs-pins { + pins = "gpio2"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + blsp1-spi1-sleep-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + }; diff --git a/dts/Bindings/pinctrl/qcom,msm8998-pinctrl.txt b/dts/Bindings/pinctrl/qcom,msm8998-pinctrl.txt deleted file mode 100644 index c4de930f24..0000000000 --- a/dts/Bindings/pinctrl/qcom,msm8998-pinctrl.txt +++ /dev/null @@ -1,202 +0,0 @@ -Qualcomm MSM8998 TLMM block - -This binding describes the Top Level Mode Multiplexer block found in the -MSM8998 platform. - -- compatible: - Usage: required - Value type: <string> - Definition: must be "qcom,msm8998-pinctrl" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: the base address and size of the TLMM register space. - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify the TLMM summary IRQ. - -- interrupt-controller: - Usage: required - Value type: <none> - Definition: identifies this node as an interrupt controller - -- #interrupt-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/interrupt-controller/irq.h> - -- gpio-controller: - Usage: required - Value type: <none> - Definition: identifies this node as a gpio controller - -- #gpio-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/gpio/gpio.h> - -- gpio-ranges: - Usage: required - Definition: see ../gpio/gpio.txt - -- gpio-reserved-ranges: - Usage: optional - Definition: see ../gpio/gpio.txt - -Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for -a general description of GPIO and interrupt bindings. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -The pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, drive strength, etc. - - -PIN CONFIGURATION NODES: - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pin configuration subnode: - -- pins: - Usage: required - Value type: <string-array> - Definition: List of gpio pins affected by the properties specified in - this subnode. - - Valid pins are: - gpio0-gpio149 - Supports mux, bias and drive-strength - - sdc2_clk, sdc2_cmd, sdc2_data - Supports bias and drive-strength - - ufs_reset - Supports bias and drive-strength - -- function: - Usage: required - Value type: <string> - Definition: Specify the alternative function to be configured for the - specified pins. Functions are only valid for gpio pins. - Valid values are: - - gpio, adsp_ext, agera_pll, atest_char, atest_gpsadc0, - atest_gpsadc1, atest_tsens, atest_tsens2, atest_usb1, - atest_usb10, atest_usb11, atest_usb12, atest_usb13, - audio_ref, bimc_dte0, bimc_dte1, blsp10_spi, blsp10_spi_a, - blsp10_spi_b, blsp11_i2c, blsp1_spi, blsp1_spi_a, - blsp1_spi_b, blsp2_spi, blsp9_spi, blsp_i2c1, blsp_i2c2, - blsp_i2c3, blsp_i2c4, blsp_i2c5, blsp_i2c6, blsp_i2c7, - blsp_i2c8, blsp_i2c9, blsp_i2c10, blsp_i2c11, blsp_i2c12, - blsp_spi1, blsp_spi2, blsp_spi3, blsp_spi4, blsp_spi5, - blsp_spi6, blsp_spi7, blsp_spi8, blsp_spi9, blsp_spi10, - blsp_spi11, blsp_spi12, blsp_uart1_a, blsp_uart1_b, - blsp_uart2_a, blsp_uart2_b, blsp_uart3_a, blsp_uart3_b, - blsp_uart7_a, blsp_uart7_b, blsp_uart8, blsp_uart8_a, - blsp_uart8_b, blsp_uart9_a, blsp_uart9_b, blsp_uim1_a, - blsp_uim1_b, blsp_uim2_a, blsp_uim2_b, blsp_uim3_a, - blsp_uim3_b, blsp_uim7_a, blsp_uim7_b, blsp_uim8_a, - blsp_uim8_b, blsp_uim9_a, blsp_uim9_b, bt_reset, - btfm_slimbus, cam_mclk, cci_async, cci_i2c, cci_timer0, - cci_timer1, cci_timer2, cci_timer3, cci_timer4, cri_trng, - cri_trng0, cri_trng1, dbg_out, ddr_bist, edp_hot, edp_lcd, - gcc_gp1_a, gcc_gp1_b, gcc_gp2_a, gcc_gp2_b, gcc_gp3_a, - gcc_gp3_b, hdmi_cec, hdmi_ddc, hdmi_hot, hdmi_rcv, - isense_dbg, jitter_bist, ldo_en, ldo_update, lpass_slimbus, - m_voc, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2, - mdp_vsync3, mdp_vsync_a, mdp_vsync_b, modem_tsync, mss_lte, - nav_dr, nav_pps, pa_indicator, pci_e0, phase_flag, - pll_bypassnl, pll_reset, pri_mi2s, pri_mi2s_ws, prng_rosc, - pwr_crypto, pwr_modem, pwr_nav, qdss_cti0_a, qdss_cti0_b, - qdss_cti1_a, qdss_cti1_b, qdss, qlink_enable, - qlink_request, qua_mi2s, sd_card, sd_write, sdc40, sdc41, - sdc42, sdc43, sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, - spkr_i2s, ssbi1, ssc_irq, ter_mi2s, tgu_ch0, tgu_ch1, - tsense_pwm1, tsense_pwm2, tsif0, tsif1, - uim1_clk, uim1_data, uim1_present, - uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset, - uim_batt, usb_phy, vfr_1, vsense_clkout, vsense_data0, - vsense_data1, vsense_mode, wlan1_adc0, wlan1_adc1, - wlan2_adc0, wlan2_adc1, - -- bias-disable: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as no pull. - -- bias-pull-down: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull down. - -- bias-pull-up: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull up. - -- output-high: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - high. - Not valid for sdc pins. - -- output-low: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - low. - Not valid for sdc pins. - -- drive-strength: - Usage: optional - Value type: <u32> - Definition: Selects the drive strength for the specified pins, in mA. - Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 - -Example: - - tlmm: pinctrl@03400000 { - compatible = "qcom,msm8998-pinctrl"; - reg = <0x03400000 0xc00000>; - interrupts = <0 208 0>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&tlmm 0 0 175>; - gpio-reserved-ranges = <0 4>, <81 4>; - interrupt-controller; - #interrupt-cells = <2>; - - uart_console_active: uart_console_active { - mux { - pins = "gpio4", "gpio5"; - function = "blsp_uart8_a"; - }; - - config { - pins = "gpio4", "gpio5"; - drive-strength = <2>; - bias-disable; - }; - }; - }; diff --git a/dts/Bindings/pinctrl/qcom,msm8998-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,msm8998-pinctrl.yaml new file mode 100644 index 0000000000..bcaa231ada --- /dev/null +++ b/dts/Bindings/pinctrl/qcom,msm8998-pinctrl.yaml @@ -0,0 +1,157 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,msm8998-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm MSM8998 TLMM pin controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm MSM8998 SoC. + +properties: + compatible: + const: qcom,msm8998-pinctrl + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-reserved-ranges: + minItems: 1 + maxItems: 75 + + gpio-line-names: + maxItems: 150 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-msm8998-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-msm8998-tlmm-state" + additionalProperties: false + +$defs: + qcom-msm8998-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9])$" + - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ gpio, adsp_ext, agera_pll, atest_char, atest_gpsadc0, + atest_gpsadc1, atest_tsens, atest_tsens2, atest_usb1, + atest_usb10, atest_usb11, atest_usb12, atest_usb13, audio_ref, + bimc_dte0, bimc_dte1, blsp10_spi, blsp10_spi_a, blsp10_spi_b, + blsp11_i2c, blsp1_spi, blsp1_spi_a, blsp1_spi_b, blsp2_spi, + blsp9_spi, blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, + blsp_i2c5, blsp_i2c6, blsp_i2c7, blsp_i2c8, blsp_i2c9, + blsp_i2c10, blsp_i2c11, blsp_i2c12, blsp_spi1, blsp_spi2, + blsp_spi3, blsp_spi4, blsp_spi5, blsp_spi6, blsp_spi7, + blsp_spi8, blsp_spi9, blsp_spi10, blsp_spi11, blsp_spi12, + blsp_uart1_a, blsp_uart1_b, blsp_uart2_a, blsp_uart2_b, + blsp_uart3_a, blsp_uart3_b, blsp_uart7_a, blsp_uart7_b, + blsp_uart8, blsp_uart8_a, blsp_uart8_b, blsp_uart9_a, + blsp_uart9_b, blsp_uim1_a, blsp_uim1_b, blsp_uim2_a, + blsp_uim2_b, blsp_uim3_a, blsp_uim3_b, blsp_uim7_a, + blsp_uim7_b, blsp_uim8_a, blsp_uim8_b, blsp_uim9_a, + blsp_uim9_b, bt_reset, btfm_slimbus, cam_mclk, cci_async, + cci_i2c, cci_timer0, cci_timer1, cci_timer2, cci_timer3, + cci_timer4, cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, + edp_hot, edp_lcd, gcc_gp1_a, gcc_gp1_b, gcc_gp2_a, gcc_gp2_b, + gcc_gp3_a, gcc_gp3_b, hdmi_cec, hdmi_ddc, hdmi_hot, hdmi_rcv, + isense_dbg, jitter_bist, ldo_en, ldo_update, lpass_slimbus, + m_voc, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2, + mdp_vsync3, mdp_vsync_a, mdp_vsync_b, modem_tsync, mss_lte, + nav_dr, nav_pps, pa_indicator, pci_e0, phase_flag, + pll_bypassnl, pll_reset, pri_mi2s, pri_mi2s_ws, prng_rosc, + pwr_crypto, pwr_modem, pwr_nav, qdss_cti0_a, qdss_cti0_b, + qdss_cti1_a, qdss_cti1_b, qdss, qlink_enable, qlink_request, + qua_mi2s, sd_card, sd_write, sdc40, sdc41, sdc42, sdc43, + sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, spkr_i2s, ssbi1, ssc_irq, + ter_mi2s, tgu_ch0, tgu_ch1, tsense_pwm1, tsense_pwm2, tsif0, + tsif1, uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk, + uim2_data, uim2_present, uim2_reset, uim_batt, usb_phy, vfr_1, + vsense_clkout, vsense_data0, vsense_data1, vsense_mode, + wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1 ] + + required: + - pins + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + tlmm: pinctrl@3400000 { + compatible = "qcom,msm8998-pinctrl"; + reg = <0x03400000 0xc00000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-ranges = <&tlmm 0 0 150>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-reserved-ranges = <0 4>, <81 4>; + + sdc2-off-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + sdc2-cd-state { + pins = "gpio95"; + function = "gpio"; + bias-pull-up; + drive-strength = <2>; + }; + }; diff --git a/dts/Bindings/pinctrl/qcom,pmic-gpio.yaml b/dts/Bindings/pinctrl/qcom,pmic-gpio.yaml index 9bd01db37d..3f8ad07c7c 100644 --- a/dts/Bindings/pinctrl/qcom,pmic-gpio.yaml +++ b/dts/Bindings/pinctrl/qcom,pmic-gpio.yaml @@ -17,37 +17,61 @@ properties: compatible: items: - enum: + - qcom,pm2250-gpio - qcom,pm660-gpio - qcom,pm660l-gpio + - qcom,pm6125-gpio - qcom,pm6150-gpio - qcom,pm6150l-gpio + - qcom,pm6350-gpio + - qcom,pm7250b-gpio - qcom,pm7325-gpio + - qcom,pm7550ba-gpio - qcom,pm8005-gpio - qcom,pm8008-gpio - qcom,pm8018-gpio + - qcom,pm8019-gpio - qcom,pm8038-gpio - qcom,pm8058-gpio - qcom,pm8150-gpio - qcom,pm8150b-gpio + - qcom,pm8150l-gpio + - qcom,pm8226-gpio - qcom,pm8350-gpio - qcom,pm8350b-gpio - qcom,pm8350c-gpio + - qcom,pm8450-gpio + - qcom,pm8550-gpio + - qcom,pm8550b-gpio + - qcom,pm8550ve-gpio + - qcom,pm8550vs-gpio - qcom,pm8916-gpio - qcom,pm8917-gpio - qcom,pm8921-gpio - qcom,pm8941-gpio - qcom,pm8950-gpio + - qcom,pm8953-gpio - qcom,pm8994-gpio - qcom,pm8998-gpio - qcom,pma8084-gpio + - qcom,pmc8180-gpio + - qcom,pmc8180c-gpio + - qcom,pmi632-gpio - qcom,pmi8950-gpio - qcom,pmi8994-gpio - qcom,pmi8998-gpio - qcom,pmk8350-gpio + - qcom,pmk8550-gpio + - qcom,pmm8155au-gpio + - qcom,pmm8654au-gpio + - qcom,pmp8074-gpio - qcom,pmr735a-gpio - qcom,pmr735b-gpio + - qcom,pmr735d-gpio - qcom,pms405-gpio - qcom,pmx55-gpio + - qcom,pmx65-gpio + - qcom,pmx75-gpio - enum: - qcom,spmi-gpio @@ -66,6 +90,16 @@ properties: gpio-ranges: maxItems: 1 + gpio-line-names: + minItems: 2 + maxItems: 44 + + gpio-reserved-ranges: + minItems: 1 + # maxItems as half of total number of GPIOs, as there has to be at + # least one usable GPIO between each reserved range. + maxItems: 22 + '#gpio-cells': const: 2 description: @@ -82,28 +116,310 @@ required: - gpio-ranges - interrupt-controller +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8008-gpio + - qcom,pmi8950-gpio + - qcom,pmr735d-gpio + then: + properties: + gpio-line-names: + minItems: 2 + maxItems: 2 + gpio-reserved-ranges: + maxItems: 1 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8005-gpio + - qcom,pm8450-gpio + - qcom,pm8916-gpio + - qcom,pmk8350-gpio + - qcom,pmr735a-gpio + - qcom,pmr735b-gpio + then: + properties: + gpio-line-names: + minItems: 4 + maxItems: 4 + gpio-reserved-ranges: + minItems: 1 + maxItems: 2 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8018-gpio + - qcom,pm8019-gpio + - qcom,pm8550vs-gpio + - qcom,pmk8550-gpio + then: + properties: + gpio-line-names: + minItems: 6 + maxItems: 6 + gpio-reserved-ranges: + minItems: 1 + maxItems: 3 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm7550ba-gpio + - qcom,pm8226-gpio + - qcom,pm8350b-gpio + - qcom,pm8550ve-gpio + - qcom,pm8950-gpio + - qcom,pm8953-gpio + - qcom,pmi632-gpio + then: + properties: + gpio-line-names: + minItems: 8 + maxItems: 8 + gpio-reserved-ranges: + minItems: 1 + maxItems: 4 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm6350-gpio + - qcom,pm8350c-gpio + then: + properties: + gpio-line-names: + minItems: 9 + maxItems: 9 + gpio-reserved-ranges: + minItems: 1 + maxItems: 5 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm2250-gpio + - qcom,pm6150-gpio + - qcom,pm7325-gpio + - qcom,pm8150-gpio + - qcom,pm8350-gpio + - qcom,pmc8180-gpio + - qcom,pmi8994-gpio + - qcom,pmm8155au-gpio + then: + properties: + gpio-line-names: + minItems: 10 + maxItems: 10 + gpio-reserved-ranges: + minItems: 1 + maxItems: 5 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pmx55-gpio + then: + properties: + gpio-line-names: + minItems: 11 + maxItems: 11 + gpio-reserved-ranges: + minItems: 1 + maxItems: 6 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm660l-gpio + - qcom,pm6150l-gpio + - qcom,pm7250b-gpio + - qcom,pm8038-gpio + - qcom,pm8150b-gpio + - qcom,pm8150l-gpio + - qcom,pm8550-gpio + - qcom,pm8550b-gpio + - qcom,pmc8180c-gpio + - qcom,pmp8074-gpio + - qcom,pms405-gpio + then: + properties: + gpio-line-names: + minItems: 12 + maxItems: 12 + gpio-reserved-ranges: + minItems: 1 + maxItems: 6 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm660-gpio + then: + properties: + gpio-line-names: + minItems: 13 + maxItems: 13 + gpio-reserved-ranges: + minItems: 1 + maxItems: 7 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pmi8998-gpio + then: + properties: + gpio-line-names: + minItems: 14 + maxItems: 14 + gpio-reserved-ranges: + minItems: 1 + maxItems: 7 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pmx65-gpio + - qcom,pmx75-gpio + then: + properties: + gpio-line-names: + minItems: 16 + maxItems: 16 + gpio-reserved-ranges: + minItems: 1 + maxItems: 8 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8994-gpio + - qcom,pma8084-gpio + then: + properties: + gpio-line-names: + minItems: 22 + maxItems: 22 + gpio-reserved-ranges: + minItems: 1 + maxItems: 11 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8998-gpio + then: + properties: + gpio-line-names: + minItems: 26 + maxItems: 26 + gpio-reserved-ranges: + minItems: 1 + maxItems: 13 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8941-gpio + then: + properties: + gpio-line-names: + minItems: 36 + maxItems: 36 + gpio-reserved-ranges: + minItems: 1 + maxItems: 18 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8917-gpio + then: + properties: + gpio-line-names: + minItems: 38 + maxItems: 38 + gpio-reserved-ranges: + minItems: 1 + maxItems: 19 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8058-gpio + - qcom,pm8921-gpio + then: + properties: + gpio-line-names: + minItems: 44 + maxItems: 44 + gpio-reserved-ranges: + minItems: 1 + maxItems: 22 + patternProperties: '-state$': oneOf: - $ref: "#/$defs/qcom-pmic-gpio-state" - patternProperties: - ".*": + "(pinconf|-pins)$": $ref: "#/$defs/qcom-pmic-gpio-state" + additionalProperties: false $defs: qcom-pmic-gpio-state: type: object allOf: - - $ref: "pinmux-node.yaml" - - $ref: "pincfg-node.yaml" + - $ref: pinmux-node.yaml + - $ref: pincfg-node.yaml properties: pins: description: List of gpio pins affected by the properties specified in this subnode. Valid pins are + - gpio1-gpio9 for pm6125 - gpio1-gpio10 for pm6150 - gpio1-gpio12 for pm6150l + - gpio1-gpio9 for pm6350 + - gpio1-gpio12 for pm7250b - gpio1-gpio10 for pm7325 + - gpio1-gpio8 for pm7550ba - gpio1-gpio4 for pm8005 - gpio1-gpio2 for pm8008 - gpio1-gpio6 for pm8018 @@ -118,22 +434,36 @@ $defs: - gpio1-gpio10 for pm8350 - gpio1-gpio8 for pm8350b - gpio1-gpio9 for pm8350c + - gpio1-gpio4 for pm8450 + - gpio1-gpio12 for pm8550 + - gpio1-gpio12 for pm8550b + - gpio1-gpio8 for pm8550ve + - gpio1-gpio6 for pm8550vs - gpio1-gpio38 for pm8917 - gpio1-gpio44 for pm8921 - gpio1-gpio36 for pm8941 - gpio1-gpio8 for pm8950 (hole on gpio3) + - gpio1-gpio8 for pm8953 (hole on gpio3 and gpio6) - gpio1-gpio22 for pm8994 - gpio1-gpio26 for pm8998 - gpio1-gpio22 for pma8084 + - gpio1-gpio8 for pmi632 - gpio1-gpio2 for pmi8950 - gpio1-gpio10 for pmi8994 - gpio1-gpio4 for pmk8350 + - gpio1-gpio6 for pmk8550 + - gpio1-gpio10 for pmm8155au + - gpio1-gpio12 for pmm8654au + - gpio1-gpio12 for pmp8074 (holes on gpio1 and gpio12) - gpio1-gpio4 for pmr735a - gpio1-gpio4 for pmr735b + - gpio1-gpio2 for pmr735d - gpio1-gpio12 for pms405 (holes on gpio1, gpio9 and gpio10) - gpio1-gpio11 for pmx55 (holes on gpio3, gpio7, gpio10 and gpio11) + - gpio1-gpio16 for pmx65 + - gpio1-gpio16 for pmx75 items: pattern: "^gpio([0-9]+)$" @@ -168,8 +498,11 @@ $defs: bias-high-impedance: true input-enable: true + input-disable: true output-high: true output-low: true + output-enable: true + output-disable: true power-source: true qcom,drive-strength: @@ -224,7 +557,7 @@ examples: #gpio-cells = <2>; pm8921_gpio_keys: gpio-keys-state { - volume-keys { + volume-keys-pins { pins = "gpio20", "gpio21"; function = "normal"; diff --git a/dts/Bindings/pinctrl/qcom,pmic-mpp.txt b/dts/Bindings/pinctrl/qcom,pmic-mpp.txt deleted file mode 100644 index 5363d44cbb..0000000000 --- a/dts/Bindings/pinctrl/qcom,pmic-mpp.txt +++ /dev/null @@ -1,187 +0,0 @@ -Qualcomm PMIC Multi-Purpose Pin (MPP) block - -This binding describes the MPP block(s) found in the 8xxx series -of PMIC's from Qualcomm. - -- compatible: - Usage: required - Value type: <string> - Definition: Should contain one of: - "qcom,pm8018-mpp", - "qcom,pm8019-mpp", - "qcom,pm8038-mpp", - "qcom,pm8058-mpp", - "qcom,pm8821-mpp", - "qcom,pm8841-mpp", - "qcom,pm8916-mpp", - "qcom,pm8917-mpp", - "qcom,pm8921-mpp", - "qcom,pm8941-mpp", - "qcom,pm8950-mpp", - "qcom,pmi8950-mpp", - "qcom,pm8994-mpp", - "qcom,pma8084-mpp", - "qcom,pmi8994-mpp", - - And must contain either "qcom,spmi-mpp" or "qcom,ssbi-mpp" - if the device is on an spmi bus or an ssbi bus respectively. - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: Register base of the MPP block and length. - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: Must contain an array of encoded interrupt specifiers for - each available MPP - -- gpio-controller: - Usage: required - Value type: <none> - Definition: Mark the device node as a GPIO controller - -- #gpio-cells: - Usage: required - Value type: <u32> - Definition: Must be 2; - the first cell will be used to define MPP number and the - second denotes the flags for this MPP - -Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for -a general description of GPIO and interrupt bindings. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -The pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin or a list of pins. This configuration can include the -mux function to select on those pin(s), and various pin configuration -parameters, as listed below. - -SUBNODES: - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pin configuration subnode: - -- pins: - Usage: required - Value type: <string-array> - Definition: List of MPP pins affected by the properties specified in - this subnode. Valid pins are: - mpp1-mpp4 for pm8841 - mpp1-mpp4 for pm8916 - mpp1-mpp8 for pm8941 - mpp1-mpp4 for pm8950 - mpp1-mpp4 for pmi8950 - mpp1-mpp4 for pma8084 - -- function: - Usage: required - Value type: <string> - Definition: Specify the alternative function to be configured for the - specified pins. Valid values are: - "digital", - "analog", - "sink" - -- bias-disable: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as no pull. - -- bias-pull-up: - Usage: optional - Value type: <u32> - Definition: The specified pins should be configured as pull up. - Valid values are 600, 10000 and 30000 in bidirectional mode - only, i.e. when operating in qcom,analog-mode and input and - outputs are enabled. The hardware ignores the configuration - when operating in other modes. - -- bias-high-impedance: - Usage: optional - Value type: <none> - Definition: The specified pins will put in high-Z mode and disabled. - -- input-enable: - Usage: optional - Value type: <none> - Definition: The specified pins are put in input mode, i.e. their input - buffer is enabled - -- output-high: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - high. - -- output-low: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - low. - -- power-source: - Usage: optional - Value type: <u32> - Definition: Selects the power source for the specified pins. Valid power - sources are defined in <dt-bindings/pinctrl/qcom,pmic-mpp.h> - -- qcom,analog-level: - Usage: optional - Value type: <u32> - Definition: Selects the source for analog output. Valued values are - defined in <dt-binding/pinctrl/qcom,pmic-mpp.h> - PMIC_MPP_AOUT_LVL_* - -- qcom,dtest: - Usage: optional - Value type: <u32> - Definition: Selects which dtest rail to be routed in the various functions. - Valid values are 1-4 - -- qcom,amux-route: - Usage: optional - Value type: <u32> - Definition: Selects the source for analog input. Valid values are - defined in <dt-bindings/pinctrl/qcom,pmic-mpp.h> - PMIC_MPP_AMUX_ROUTE_CH5, PMIC_MPP_AMUX_ROUTE_CH6... -- qcom,paired: - Usage: optional - Value type: <none> - Definition: Indicates that the pin should be operating in paired mode. - -Example: - - mpps@a000 { - compatible = "qcom,pm8841-mpp", "qcom,spmi-mpp"; - reg = <0xa000>; - gpio-controller; - #gpio-cells = <2>; - interrupts = <4 0xa0 0 0>, <4 0xa1 0 0>, <4 0xa2 0 0>, <4 0xa3 0 0>; - - pinctrl-names = "default"; - pinctrl-0 = <&pm8841_default>; - - pm8841_default: default { - gpio { - pins = "mpp1", "mpp2", "mpp3", "mpp4"; - function = "digital"; - input-enable; - power-source = <PM8841_MPP_S3>; - }; - }; - }; diff --git a/dts/Bindings/pinctrl/qcom,pmic-mpp.yaml b/dts/Bindings/pinctrl/qcom,pmic-mpp.yaml new file mode 100644 index 0000000000..fe717d8d47 --- /dev/null +++ b/dts/Bindings/pinctrl/qcom,pmic-mpp.yaml @@ -0,0 +1,197 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,pmic-mpp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm PMIC Multi-Purpose Pin (MPP) block + +maintainers: + - Bjorn Andersson <bjorn.andersson@linaro.org> + +description: + This binding describes the MPP block(s) found in the 8xxx series of + PMIC's from Qualcomm. + +properties: + compatible: + oneOf: + - items: + - enum: + - qcom,pm8019-mpp + - qcom,pm8226-mpp + - qcom,pm8841-mpp + - qcom,pm8916-mpp + - qcom,pm8941-mpp + - qcom,pm8950-mpp + - qcom,pmi8950-mpp + - qcom,pm8994-mpp + - qcom,pma8084-mpp + - qcom,pmi8994-mpp + - const: qcom,spmi-mpp + - items: + - enum: + - qcom,pm8018-mpp + - qcom,pm8038-mpp + - qcom,pm8058-mpp + - qcom,pm8821-mpp + - qcom,pm8917-mpp + - qcom,pm8921-mpp + - const: qcom,ssbi-mpp + + reg: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + + gpio-controller: true + gpio-line-names: true + + gpio-ranges: + maxItems: 1 + + '#gpio-cells': + const: 2 + description: + The first cell will be used to define gpio number and the + second denotes the flags for this gpio + +additionalProperties: false + +required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + - gpio-ranges + - interrupt-controller + +patternProperties: + '-state$': + oneOf: + - $ref: "#/$defs/qcom-pmic-mpp-state" + - patternProperties: + '-pins$': + $ref: "#/$defs/qcom-pmic-mpp-state" + additionalProperties: false + +$defs: + qcom-pmic-mpp-state: + type: object + allOf: + - $ref: pinmux-node.yaml + - $ref: pincfg-node.yaml + properties: + pins: + description: + List of gpio pins affected by the properties specified in + this subnode. Valid pins are + - mpp1-mpp4 for pm8841 + - mpp1-mpp4 for pm8916 + - mpp1-mpp8 for pm8941 + - mpp1-mpp4 for pm8950 + - mpp1-mpp4 for pmi8950 + - mpp1-mpp4 for pma8084 + + items: + pattern: "^mpp([0-9]+)$" + + function: + items: + - enum: + - digital + - analog + - sink + + bias-disable: true + bias-pull-up: true + bias-high-impedance: true + input-enable: true + output-high: true + output-low: true + power-source: true + + qcom,analog-level: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Selects the source for analog output. Valued values are defined in + <dt-binding/pinctrl/qcom,pmic-mpp.h> PMIC_MPP_AOUT_LVL_* + enum: [0, 1, 2, 3, 4, 5, 6, 7] + + qcom,atest: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Selects ATEST rail to route to GPIO when it's + configured in analog-pass-through mode. + enum: [1, 2, 3, 4] + + qcom,dtest: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Selects DTEST rail to route to GPIO when it's + configured as digital input. + enum: [1, 2, 3, 4] + + qcom,amux-route: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Selects the source for analog input. Valid values are defined in + <dt-bindings/pinctrl/qcom,pmic-mpp.h> PMIC_MPP_AMUX_ROUTE_CH5, + PMIC_MPP_AMUX_ROUTE_CH6... + enum: [0, 1, 2, 3, 4, 5, 6, 7] + + qcom,paired: + type: boolean + description: + Indicates that the pin should be operating in paired mode. + + required: + - pins + - function + + additionalProperties: false + +examples: + - | + #include <dt-bindings/pinctrl/qcom,pmic-mpp.h> + + pmic { + #address-cells = <1>; + #size-cells = <0>; + + pm8841_mpp: mpps@a000 { + compatible = "qcom,pm8841-mpp", "qcom,spmi-mpp"; + reg = <0xa000>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pm8841_mpp 0 0 4>; + gpio-line-names = "VDD_PX_BIAS", "WLAN_LED_CTRL", + "BT_LED_CTRL", "GPIO-F"; + interrupt-controller; + #interrupt-cells = <2>; + + pinctrl-names = "default"; + pinctrl-0 = <&pm8841_default>; + + mpp1-state { + pins = "mpp1"; + function = "digital"; + input-enable; + power-source = <PM8841_MPP_S3>; + }; + + default-state { + gpio-pins { + pins = "mpp1", "mpp2", "mpp3", "mpp4"; + function = "digital"; + input-enable; + power-source = <PM8841_MPP_S3>; + }; + }; + }; + }; +... diff --git a/dts/Bindings/pinctrl/qcom,qcm2290-tlmm.yaml b/dts/Bindings/pinctrl/qcom,qcm2290-tlmm.yaml new file mode 100644 index 0000000000..e123beb33a --- /dev/null +++ b/dts/Bindings/pinctrl/qcom,qcm2290-tlmm.yaml @@ -0,0 +1,122 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,qcm2290-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. QCM2290 TLMM block + +maintainers: + - Shawn Guo <shawn.guo@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm QCM2290 SoC. + +properties: + compatible: + const: qcom,qcm2290-tlmm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-qcm2290-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-qcm2290-tlmm-state" + additionalProperties: false + +$defs: + qcom-qcm2290-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-1][0-9]|12[0-6])$" + - enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data, + sdc2_clk, sdc2_cmd, sdc2_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ adsp_ext, agera_pll, atest, cam_mclk, cci_async, cci_i2c, + cci_timer0, cci_timer1, cci_timer2, cci_timer3, char_exec, + cri_trng, cri_trng0, cri_trng1, dac_calib, dbg_out, ddr_bist, + ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3, gcc_gp1, gcc_gp2, + gcc_gp3, gpio, gp_pdm0, gp_pdm1, gp_pdm2, gsm0_tx, gsm1_tx, + jitter_bist, mdp_vsync, mdp_vsync_out_0, mdp_vsync_out_1, + mpm_pwr, mss_lte, m_voc, nav_gpio, pa_indicator, pbs0, pbs1, + pbs2, pbs3, pbs4, pbs5, pbs6, pbs7, pbs8, pbs9, pbs10, pbs11, + pbs12, pbs13, pbs14, pbs15, pbs_out, phase_flag, pll_bist, + pll_bypassnl, pll_reset, prng_rosc, pwm_0, pwm_1, pwm_2, pwm_3, + pwm_4, pwm_5, pwm_6, pwm_7, pwm_8, pwm_9, qdss_cti, qdss_gpio, + qup0, qup1, qup2, qup3, qup4, qup5, sdc1_tb, sdc2_tb, sd_write, + ssbi_wtr1, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm, + uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk, + uim2_data, uim2_present, uim2_reset, usb_phy, vfr_1, + vsense_trigger, wlan1_adc0, wlan1_adc1 ] + + required: + - pins + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@500000 { + compatible = "qcom,qcm2290-tlmm"; + reg = <0x500000 0x300000>; + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 127>; + + sdc2_on_state: sdc2-on-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + }; + }; diff --git a/dts/Bindings/pinctrl/qcom,qcs404-pinctrl.txt b/dts/Bindings/pinctrl/qcom,qcs404-pinctrl.txt deleted file mode 100644 index a50e746841..0000000000 --- a/dts/Bindings/pinctrl/qcom,qcs404-pinctrl.txt +++ /dev/null @@ -1,199 +0,0 @@ -Qualcomm QCS404 TLMM block - -This binding describes the Top Level Mode Multiplexer block found in the -QCS404 platform. - -- compatible: - Usage: required - Value type: <string> - Definition: must be "qcom,qcs404-pinctrl" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: the base address and size of the north, south and east TLMM - tiles. - -- reg-names: - Usage: required - Value type: <stringlist> - Defintiion: names for the cells of reg, must contain "north", "south" - and "east". - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify the TLMM summary IRQ. - -- interrupt-controller: - Usage: required - Value type: <none> - Definition: identifies this node as an interrupt controller - -- #interrupt-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/interrupt-controller/irq.h> - -- gpio-controller: - Usage: required - Value type: <none> - Definition: identifies this node as a gpio controller - -- #gpio-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/gpio/gpio.h> - -- gpio-ranges: - Usage: required - Definition: see ../gpio/gpio.txt - -Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for -a general description of GPIO and interrupt bindings. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -The pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, drive strength, etc. - - -PIN CONFIGURATION NODES: - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pin configuration subnode: - -- pins: - Usage: required - Value type: <string-array> - Definition: List of gpio pins affected by the properties specified in - this subnode. - - Valid pins are: - gpio0-gpio119 - Supports mux, bias and drive-strength - - sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, - sdc2_data - Supports bias and drive-strength - - ufs_reset - Supports bias and drive-strength - -- function: - Usage: required - Value type: <string> - Definition: Specify the alternative function to be configured for the - specified pins. Functions are only valid for gpio pins. - Valid values are: - - gpio, hdmi_tx, hdmi_ddc, blsp_uart_tx_a2, blsp_spi2, m_voc, - qdss_cti_trig_in_a0, blsp_uart_rx_a2, qdss_tracectl_a, - blsp_uart2, aud_cdc, blsp_i2c_sda_a2, qdss_tracedata_a, - blsp_i2c_scl_a2, qdss_tracectl_b, qdss_cti_trig_in_b0, - blsp_uart1, blsp_spi_mosi_a1, blsp_spi_miso_a1, - qdss_tracedata_b, blsp_i2c1, blsp_spi_cs_n_a1, gcc_plltest, - blsp_spi_clk_a1, rgb_data0, blsp_uart5, blsp_spi5, - adsp_ext, rgb_data1, prng_rosc, rgb_data2, blsp_i2c5, - gcc_gp1_clk_b, rgb_data3, gcc_gp2_clk_b, blsp_spi0, - blsp_uart0, gcc_gp3_clk_b, blsp_i2c0, qdss_traceclk_b, - pcie_clk, nfc_irq, blsp_spi4, nfc_dwl, audio_ts, rgb_data4, - spi_lcd, blsp_uart_tx_b2, gcc_gp3_clk_a, rgb_data5, - blsp_uart_rx_b2, blsp_i2c_sda_b2, blsp_i2c_scl_b2, - pwm_led11, i2s_3_data0_a, ebi2_lcd, i2s_3_data1_a, - i2s_3_data2_a, atest_char, pwm_led3, i2s_3_data3_a, - pwm_led4, i2s_4, ebi2_a, dsd_clk_b, pwm_led5, pwm_led6, - pwm_led7, pwm_led8, pwm_led24, spkr_dac0, blsp_i2c4, - pwm_led9, pwm_led10, spdifrx_opt, pwm_led12, pwm_led13, - pwm_led14, wlan1_adc1, rgb_data_b0, pwm_led15, - blsp_spi_mosi_b1, wlan1_adc0, rgb_data_b1, pwm_led16, - blsp_spi_miso_b1, qdss_cti_trig_out_b0, wlan2_adc1, - rgb_data_b2, pwm_led17, blsp_spi_cs_n_b1, wlan2_adc0, - rgb_data_b3, pwm_led18, blsp_spi_clk_b1, rgb_data_b4, - pwm_led19, ext_mclk1_b, qdss_traceclk_a, rgb_data_b5, - pwm_led20, atest_char3, i2s_3_sck_b, ldo_update, bimc_dte0, - rgb_hsync, pwm_led21, i2s_3_ws_b, dbg_out, rgb_vsync, - i2s_3_data0_b, ldo_en, hdmi_dtest, rgb_de, i2s_3_data1_b, - hdmi_lbk9, rgb_clk, atest_char1, i2s_3_data2_b, ebi_cdc, - hdmi_lbk8, rgb_mdp, atest_char0, i2s_3_data3_b, hdmi_lbk7, - rgb_data_b6, rgb_data_b7, hdmi_lbk6, rgmii_int, cri_trng1, - rgmii_wol, cri_trng0, gcc_tlmm, rgmii_ck, rgmii_tx, - hdmi_lbk5, hdmi_pixel, hdmi_rcv, hdmi_lbk4, rgmii_ctl, - ext_lpass, rgmii_rx, cri_trng, hdmi_lbk3, hdmi_lbk2, - qdss_cti_trig_out_b1, rgmii_mdio, hdmi_lbk1, rgmii_mdc, - hdmi_lbk0, ir_in, wsa_en, rgb_data6, rgb_data7, - atest_char2, ebi_ch0, blsp_uart3, blsp_spi3, sd_write, - blsp_i2c3, gcc_gp1_clk_a, qdss_cti_trig_in_b1, - gcc_gp2_clk_a, ext_mclk0, mclk_in1, i2s_1, dsd_clk_a, - qdss_cti_trig_in_a1, rgmi_dll1, pwm_led22, pwm_led23, - qdss_cti_trig_out_a0, rgmi_dll2, pwm_led1, - qdss_cti_trig_out_a1, pwm_led2, i2s_2, pll_bist, - ext_mclk1_a, mclk_in2, bimc_dte1, i2s_3_sck_a, i2s_3_ws_a - -- bias-disable: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as no pull. - -- bias-pull-down: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull down. - -- bias-pull-up: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull up. - -- output-high: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - high. - Not valid for sdc pins. - -- output-low: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - low. - Not valid for sdc pins. - -- drive-strength: - Usage: optional - Value type: <u32> - Definition: Selects the drive strength for the specified pins, in mA. - Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 - -Example: - - tlmm: pinctrl@1000000 { - compatible = "qcom,qcs404-pinctrl"; - reg = <0x01000000 0x200000>, - <0x01300000 0x200000>, - <0x07b00000 0x200000>; - reg-names = "south", "north", "east"; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&tlmm 0 0 120>; - interrupt-controller; - #interrupt-cells = <2>; - }; diff --git a/dts/Bindings/pinctrl/qcom,qcs404-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,qcs404-pinctrl.yaml new file mode 100644 index 0000000000..4009501b34 --- /dev/null +++ b/dts/Bindings/pinctrl/qcom,qcs404-pinctrl.yaml @@ -0,0 +1,162 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,qcs404-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm QCS404 TLMM pin controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm QCS404 SoC. + +properties: + compatible: + const: qcom,qcs404-pinctrl + + reg: + maxItems: 3 + + reg-names: + items: + - const: south + - const: north + - const: east + + interrupts: + maxItems: 1 + + gpio-reserved-ranges: + minItems: 1 + maxItems: 60 + + gpio-line-names: + maxItems: 120 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-qcs404-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-qcs404-tlmm-state" + additionalProperties: false + +$defs: + qcom-qcs404-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-1][0-9])$" + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, sdc2_clk, + sdc2_cmd, sdc2_data, ufs_reset ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ gpio, adsp_ext, atest_char, atest_char0, atest_char1, + atest_char2, atest_char3, aud_cdc, audio_ts, bimc_dte0, + bimc_dte1, blsp_i2c0, blsp_i2c1, blsp_i2c3, blsp_i2c4, + blsp_i2c5, blsp_i2c_scl_a2, blsp_i2c_scl_b2, blsp_i2c_sda_a2, + blsp_i2c_sda_b2, blsp_spi0, blsp_spi2, blsp_spi3, blsp_spi4, + blsp_spi5, blsp_spi_clk_a1, blsp_spi_clk_b1, blsp_spi_cs_n_a1, + blsp_spi_cs_n_b1, blsp_spi_miso_a1, blsp_spi_miso_b1, + blsp_spi_mosi_a1, blsp_spi_mosi_b1, blsp_uart0, blsp_uart1, + blsp_uart2, blsp_uart3, blsp_uart5, blsp_uart_rx_a2, + blsp_uart_rx_b2, blsp_uart_tx_a2, blsp_uart_tx_b2, cri_trng, + cri_trng0, cri_trng1, dbg_out, dsd_clk_a, dsd_clk_b, ebi2_a, + ebi2_lcd, ebi_cdc, ebi_ch0, ext_lpass, ext_mclk0, ext_mclk1_a, + ext_mclk1_b, gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a, + gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b, gcc_plltest, + gcc_tlmm, hdmi_ddc, hdmi_dtest, hdmi_lbk0, hdmi_lbk1, + hdmi_lbk2, hdmi_lbk3, hdmi_lbk4, hdmi_lbk5, hdmi_lbk6, + hdmi_lbk7, hdmi_lbk8, hdmi_lbk9, hdmi_pixel, hdmi_rcv, hdmi_tx, + i2s_1, i2s_2, i2s_3_data0_a, i2s_3_data0_b, i2s_3_data1_a, + i2s_3_data1_b, i2s_3_data2_a, i2s_3_data2_b, i2s_3_data3_a, + i2s_3_data3_b, i2s_3_sck_a, i2s_3_sck_b, i2s_3_ws_a, + i2s_3_ws_b, i2s_4, ir_in, ldo_en, ldo_update, mclk_in1, + mclk_in2, m_voc, nfc_dwl, nfc_irq, pcie_clk, pll_bist, + prng_rosc, pwm_led1, pwm_led10, pwm_led11, pwm_led12, + pwm_led13, pwm_led14, pwm_led15, pwm_led16, pwm_led17, + pwm_led18, pwm_led19, pwm_led2, pwm_led20, pwm_led21, + pwm_led22, pwm_led23, pwm_led24, pwm_led3, pwm_led4, pwm_led5, + pwm_led6, pwm_led7, pwm_led8, pwm_led9, qdss_cti_trig_in_a0, + qdss_cti_trig_in_a1, qdss_cti_trig_in_b0, qdss_cti_trig_in_b1, + qdss_cti_trig_out_a0, qdss_cti_trig_out_a1, + qdss_cti_trig_out_b0, qdss_cti_trig_out_b1, qdss_traceclk_a, + qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, + qdss_tracedata_a, qdss_tracedata_b, rgb_clk, rgb_data0, + rgb_data1, rgb_data2, rgb_data3, rgb_data4, rgb_data5, + rgb_data6, rgb_data7, rgb_data_b0, rgb_data_b1, rgb_data_b2, + rgb_data_b3, rgb_data_b4, rgb_data_b5, rgb_data_b6, + rgb_data_b7, rgb_de, rgb_hsync, rgb_mdp, rgb_vsync, rgmi_dll1, + rgmi_dll2, rgmii_ck, rgmii_ctl, rgmii_int, rgmii_mdc, + rgmii_mdio, rgmii_rx, rgmii_tx, rgmii_wol, sd_write, + spdifrx_opt, spi_lcd, spkr_dac0, wlan1_adc0, wlan1_adc1, + wlan2_adc0, wlan2_adc1, wsa_en ] + + required: + - pins + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + tlmm: pinctrl@1000000 { + compatible = "qcom,qcs404-pinctrl"; + reg = <0x01000000 0x200000>, + <0x01300000 0x200000>, + <0x07b00000 0x200000>; + reg-names = "south", "north", "east"; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-ranges = <&tlmm 0 0 120>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + + blsp1-i2c1-default-state { + pins = "gpio24", "gpio25"; + function = "blsp_i2c1"; + }; + + blsp1-i2c2-default-state { + sda-pins { + pins = "gpio19"; + function = "blsp_i2c_sda_a2"; + }; + + scl-pins { + pins = "gpio20"; + function = "blsp_i2c_scl_a2"; + }; + }; + }; diff --git a/dts/Bindings/pinctrl/qcom,qdu1000-tlmm.yaml b/dts/Bindings/pinctrl/qcom,qdu1000-tlmm.yaml new file mode 100644 index 0000000000..88afeae530 --- /dev/null +++ b/dts/Bindings/pinctrl/qcom,qdu1000-tlmm.yaml @@ -0,0 +1,119 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,qdu1000-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. QDU1000/QRU1000 TLMM block + +maintainers: + - Melody Olvera <quic_molvera@quicinc.com> + +description: | + Top Level Mode Multiplexer pin controller found in the QDU1000 and + QRU1000 SoCs. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,qdu1000-tlmm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-reserved-ranges: + minItems: 1 + maxItems: 76 + + gpio-line-names: + maxItems: 151 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-qdu1000-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-qdu1000-tlmm-state" + additionalProperties: false + +$defs: + qcom-qdu1000-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9]|150)$" + - enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + enum: [ atest_char, atest_usb, char_exec, CMO_PRI, cmu_rng, + dbg_out_clk, ddr_bist, ddr_pxi1, ddr_pxi2, ddr_pxi3, ddr_pxi4, + ddr_pxi5, ddr_pxi6, ddr_pxi7, eth012_int_n, eth345_int_n, + gcc_gp1, gcc_gp2, gcc_gp3, gpio, gps_pps_in, hardsync_pps_in, + intr_c, jitter_bist_ref, pcie_clkreqn, phase_flag, pll_bist, + pll_clk, prng_rosc, qdss_cti, qdss_gpio, qlink0_enable, + qlink0_request, qlink0_wmss, qlink1_enable, qlink1_request, + qlink1_wmss, qlink2_enable, qlink2_request, qlink2_wmss, + qlink3_enable, qlink3_request, qlink3_wmss, qlink4_enable, + qlink4_request, qlink4_wmss, qlink5_enable, qlink5_request, + qlink5_wmss, qlink6_enable, qlink6_request, qlink6_wmss, + qlink7_enable, qlink7_request, qlink7_wmss, qspi_clk, qspi_cs, + qspi0, qspi1, qspi2, qspi3, qup00, qup01, qup02, qup03, qup04, + qup05, qup06, qup07, qup08, qup10, qup11, qup12, qup13, qup14, + qup15, qup16, qup17, qup20, qup21, qup22, SI5518_INT, smb_alert, + smb_clk, smb_dat, tb_trig, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, + tgu_ch4, tgu_ch5, tgu_ch6, tgu_ch7, tmess_prng0, tmess_prng1, + tmess_prng2, tmess_prng3, tod_pps_in, tsense_pwm1, tsense_pwm2, + usb2phy_ac, usb_con_det, usb_dfp_en, usb_phy, vfr_0, vfr_1, + vsense_trigger ] + + required: + - pins + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + pinctrl@f000000 { + compatible = "qcom,qdu1000-tlmm"; + reg = <0xf000000 0x1000000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 151>; + wakeup-parent = <&pdc>; + + uart0-default-state { + pins = "gpio6", "gpio7", "gpio8", "gpio9"; + function = "qup00"; + }; + }; diff --git a/dts/Bindings/pinctrl/qcom,sa8775p-tlmm.yaml b/dts/Bindings/pinctrl/qcom,sa8775p-tlmm.yaml new file mode 100644 index 0000000000..e9abbf2c06 --- /dev/null +++ b/dts/Bindings/pinctrl/qcom,sa8775p-tlmm.yaml @@ -0,0 +1,125 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sa8775p-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. SA8775P TLMM block + +maintainers: + - Bartosz Golaszewski <bartosz.golaszewski@linaro.org> + +description: | + Top Level Mode Multiplexer pin controller in Qualcomm SA8775P SoC. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,sa8775p-tlmm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-reserved-ranges: + minItems: 1 + maxItems: 74 + + gpio-line-names: + maxItems: 148 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sa8775p-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sa8775p-tlmm-state" + additionalProperties: false + +$defs: + qcom-sa8775p-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-3][0-9]|14[0-7])$" + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, ufs_reset ] + minItems: 1 + maxItems: 16 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ atest_char, atest_usb2, audio_ref, cam_mclk, cci_async, cci_i2c, + cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, + cci_timer5, cci_timer6, cci_timer7, cci_timer8, cci_timer9, + cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, + ddr_pxi1, ddr_pxi2, ddr_pxi3, ddr_pxi4, ddr_pxi5, edp0_hot, + edp0_lcd, edp1_hot, edp1_lcd, edp2_hot, edp2_lcd, edp3_hot, + edp3_lcd, emac0_mcg0, emac0_mcg1, emac0_mcg2, emac0_mcg3, + emac0_mdc, emac0_mdio, emac0_ptp_aux, emac0_ptp_pps, emac1_mcg0, + emac1_mcg1, emac1_mcg2, emac1_mcg3, emac1_mdc, emac1_mdio, + emac1_ptp_aux, emac1_ptp_pps, gcc_gp1, gcc_gp2, gcc_gp3, + gcc_gp4, gcc_gp5, gpio, hs0_mi2s, hs1_mi2s, hs2_mi2s, ibi_i3c, + jitter_bist, mdp0_vsync0, mdp0_vsync1, mdp0_vsync2, mdp0_vsync3, + mdp0_vsync4, mdp0_vsync5, mdp0_vsync6, mdp0_vsync7, mdp0_vsync8, + mdp1_vsync0, mdp1_vsync1, mdp1_vsync2, mdp1_vsync3, mdp1_vsync4, + mdp1_vsync5, mdp1_vsync6, mdp1_vsync7, mdp1_vsync8, mdp_vsync, + mi2s1_data0, mi2s1_data1, mi2s1_sck, mi2s1_ws, mi2s2_data0, + mi2s2_data1, mi2s2_sck, mi2s2_ws, mi2s_mclk0, mi2s_mclk1, + pcie0_clkreq, pcie1_clkreq, phase_flag, pll_bist, pll_clk, + prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, qdss_cti, + qdss_gpio, qup0_se0, qup0_se1, qup0_se2, qup0_se3, qup0_se4, + qup0_se5, qup1_se0, qup1_se1, qup1_se2, qup1_se3, qup1_se4, + qup1_se5, qup1_se6, qup2_se0, qup2_se1, qup2_se2, qup2_se3, + qup2_se4, qup2_se5, qup2_se6, qup3_se0, sailss_emac0, + sailss_ospi, sail_top, sgmii_phy, tb_trig, tgu_ch0, tgu_ch1, + tgu_ch2, tgu_ch3, tgu_ch4, tgu_ch5, tsense_pwm1, tsense_pwm2, + tsense_pwm3, tsense_pwm4, usb2phy_ac, vsense_trigger ] + + required: + - pins + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + tlmm: pinctrl@f000000 { + compatible = "qcom,sa8775p-tlmm"; + reg = <0xf000000 0x1000000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 148>; + + qup-uart10-state { + pins = "gpio46", "gpio47"; + function = "qup1_se3"; + }; + }; +... diff --git a/dts/Bindings/pinctrl/qcom,sc7180-pinctrl.txt b/dts/Bindings/pinctrl/qcom,sc7180-pinctrl.txt deleted file mode 100644 index 6ffeac9801..0000000000 --- a/dts/Bindings/pinctrl/qcom,sc7180-pinctrl.txt +++ /dev/null @@ -1,187 +0,0 @@ -Qualcomm Technologies, Inc. SC7180 TLMM block - -This binding describes the Top Level Mode Multiplexer block found in the -SC7180 platform. - -- compatible: - Usage: required - Value type: <string> - Definition: must be "qcom,sc7180-pinctrl" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: the base address and size of the north, south and west - TLMM tiles - -- reg-names: - Usage: required - Value type: <prop-encoded-array> - Definition: names for the cells of reg, must contain "north", "south" - and "west". - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify the TLMM summary IRQ. - -- interrupt-controller: - Usage: required - Value type: <none> - Definition: identifies this node as an interrupt controller - -- #interrupt-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/interrupt-controller/irq.h> - -- gpio-controller: - Usage: required - Value type: <none> - Definition: identifies this node as a gpio controller - -- #gpio-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/gpio/gpio.h> - -- gpio-ranges: - Usage: required - Value type: <prop-encoded-array> - Definition: see ../gpio/gpio.txt - -- gpio-reserved-ranges: - Usage: optional - Value type: <prop-encoded-array> - Definition: see ../gpio/gpio.txt - -Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for -a general description of GPIO and interrupt bindings. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -The pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, drive strength, etc. - - -PIN CONFIGURATION NODES: - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pin configuration subnode: - -- pins: - Usage: required - Value type: <string-array> - Definition: List of gpio pins affected by the properties specified in - this subnode. - - Valid pins are: - gpio0-gpio118 - Supports mux, bias and drive-strength - - sdc1_clk, sdc1_cmd, sdc1_data sdc2_clk, sdc2_cmd, - sdc2_data sdc1_rclk - Supports bias and drive-strength - - ufs_reset - Supports bias and drive-strength - -- function: - Usage: required - Value type: <string> - Definition: Specify the alternative function to be configured for the - specified pins. Functions are only valid for gpio pins. - Valid values are: - - adsp_ext, agera_pll, aoss_cti, atest_char, atest_char0, - atest_char1, atest_char2, atest_char3, atest_tsens, - atest_tsens2, atest_usb1, atest_usb10, atest_usb11, - atest_usb12, atest_usb13, atest_usb2, atest_usb20, - atest_usb21, atest_usb22, atest_usb23, audio_ref, - btfm_slimbus, cam_mclk, cci_async, cci_i2c, cci_timer0, - cci_timer1, cci_timer2, cci_timer3, cci_timer4, - cri_trng, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, - ddr_pxi2, ddr_pxi3, dp_hot, edp_lcd, gcc_gp1, gcc_gp2, - gcc_gp3, gpio, gp_pdm0, gp_pdm1, gp_pdm2, gps_tx, - jitter_bist, ldo_en, ldo_update, lpass_ext, mdp_vsync, - mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s_0, - mi2s_1, mi2s_2, mss_lte, m_voc, pa_indicator, phase_flag, - PLL_BIST, pll_bypassnl, pll_reset, prng_rosc, qdss, - qdss_cti, qlink_enable, qlink_request, qspi_clk, qspi_cs, - qspi_data, qup00, qup01, qup02_i2c, qup02_uart, qup03, - qup04_i2c, qup04_uart, qup05, qup10, qup11_i2c, qup11_uart, - qup12, qup13_i2c, qup13_uart, qup14, qup15, sdc1_tb, - sdc2_tb, sd_write, sp_cmu, tgu_ch0, tgu_ch1, tgu_ch2, - tgu_ch3, tsense_pwm1, tsense_pwm2, uim1, uim2, uim_batt, - usb_phy, vfr_1, _V_GPIO, _V_PPS_IN, _V_PPS_OUT, - vsense_trigger, wlan1_adc0, wlan1_adc1, wlan2_adc0, - wlan2_adc1, - -- bias-disable: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as no pull. - -- bias-pull-down: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull down. - -- bias-pull-up: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull up. - -- output-high: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - high. - Not valid for sdc pins. - -- output-low: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - low. - Not valid for sdc pins. - -- drive-strength: - Usage: optional - Value type: <u32> - Definition: Selects the drive strength for the specified pins, in mA. - Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 - -Example: - - tlmm: pinctrl@3500000 { - compatible = "qcom,sc7180-pinctrl"; - reg = <0x3500000 0x300000>, - <0x3900000 0x300000>, - <0x3D00000 0x300000>; - reg-names = "west", "north", "south"; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&tlmm 0 0 119>; - gpio-reserved-ranges = <0 4>, <106 4>; - interrupt-controller; - #interrupt-cells = <2>; - }; diff --git a/dts/Bindings/pinctrl/qcom,sc7180-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sc7180-pinctrl.yaml new file mode 100644 index 0000000000..5606f2136a --- /dev/null +++ b/dts/Bindings/pinctrl/qcom,sc7180-pinctrl.yaml @@ -0,0 +1,144 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sc7180-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SC7180 TLMM pin controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm SC7180 SoC. + +properties: + compatible: + const: qcom,sc7180-pinctrl + + reg: + maxItems: 3 + + reg-names: + items: + - const: west + - const: north + - const: south + + interrupts: + maxItems: 1 + + gpio-reserved-ranges: + minItems: 1 + maxItems: 60 + + gpio-line-names: + maxItems: 119 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sc7180-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sc7180-tlmm-state" + additionalProperties: false + +$defs: + qcom-sc7180-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9]|11[0-8])$" + - enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, + sdc2_cmd, sdc2_data, ufs_reset ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ adsp_ext, agera_pll, aoss_cti, atest_char, atest_char0, + atest_char1, atest_char2, atest_char3, atest_tsens, + atest_tsens2, atest_usb1, atest_usb10, atest_usb11, + atest_usb12, atest_usb13, atest_usb2, atest_usb20, atest_usb21, + atest_usb22, atest_usb23, audio_ref, btfm_slimbus, cam_mclk, + cci_async, cci_i2c, cci_timer0, cci_timer1, cci_timer2, + cci_timer3, cci_timer4, cri_trng, dbg_out, ddr_bist, ddr_pxi0, + ddr_pxi1, ddr_pxi2, ddr_pxi3, dp_hot, edp_lcd, gcc_gp1, + gcc_gp2, gcc_gp3, gpio, gp_pdm0, gp_pdm1, gp_pdm2, gps_tx, + jitter_bist, ldo_en, ldo_update, lpass_ext, mdp_vsync, + mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s_0, mi2s_1, + mi2s_2, mss_lte, m_voc, pa_indicator, phase_flag, PLL_BIST, + pll_bypassnl, pll_reset, prng_rosc, qdss, qdss_cti, + qlink_enable, qlink_request, qspi_clk, qspi_cs, qspi_data, + qup00, qup01, qup02_i2c, qup02_uart, qup03, qup04_i2c, + qup04_uart, qup05, qup10, qup11_i2c, qup11_uart, qup12, + qup13_i2c, qup13_uart, qup14, qup15, sdc1_tb, sdc2_tb, + sd_write, sp_cmu, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, + tsense_pwm1, tsense_pwm2, uim1, uim2, uim_batt, usb_phy, vfr_1, + _V_GPIO, _V_PPS_IN, _V_PPS_OUT, vsense_trigger, wlan1_adc0, + wlan1_adc1, wlan2_adc0, wlan2_adc1 ] + + required: + - pins + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +required: + - compatible + - reg + - reg-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + tlmm: pinctrl@3500000 { + compatible = "qcom,sc7180-pinctrl"; + reg = <0x03500000 0x300000>, + <0x03900000 0x300000>, + <0x03d00000 0x300000>; + reg-names = "west", "north", "south"; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 120>; + wakeup-parent = <&pdc>; + + dp_hot_plug_det: dp-hot-plug-det-state { + pins = "gpio117"; + function = "dp_hot"; + }; + + qup_spi11_cs_gpio: qup-spi11-cs-gpio-state { + spi-pins { + pins = "gpio53", "gpio54", "gpio55"; + function = "qup15"; + }; + + cs-pins { + pins = "gpio56"; + function = "gpio"; + }; + }; + }; diff --git a/dts/Bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml new file mode 100644 index 0000000000..08801cc4e4 --- /dev/null +++ b/dts/Bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SC7280 SoC LPASS LPI TLMM + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem + (LPASS) Low Power Island (LPI) of Qualcomm SC7280 SoC. + +properties: + compatible: + const: qcom,sc7280-lpass-lpi-pinctrl + + reg: + maxItems: 2 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sc7280-lpass-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sc7280-lpass-state" + additionalProperties: false + +$defs: + qcom-sc7280-lpass-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|1[0-4])$" + minItems: 1 + maxItems: 15 + + function: + enum: [ gpio, swr_tx_clk, qua_mi2s_sclk, swr_tx_data, qua_mi2s_ws, + qua_mi2s_data, swr_rx_clk, swr_rx_data, dmic1_clk, i2s1_clk, + dmic1_data, i2s1_ws, dmic2_clk, dmic2_data, i2s1_data, + i2s2_clk, wsa_swr_clk, i2s2_ws, wsa_swr_data, dmic3_clk, + dmic3_data, i2s2_data ] + description: + Specify the alternative function to be configured for the specified + pins. + +required: + - compatible + - reg + +allOf: + - $ref: qcom,lpass-lpi-common.yaml# + +unevaluatedProperties: false + +examples: + - | + lpass_tlmm: pinctrl@33c0000 { + compatible = "qcom,sc7280-lpass-lpi-pinctrl"; + reg = <0x33c0000 0x20000>, + <0x3550000 0x10000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 15>; + + dmic01-state { + dmic01-clk-pins { + pins = "gpio6"; + function = "dmic1_clk"; + }; + + dmic01-clk-sleep-pins { + pins = "gpio6"; + function = "dmic1_clk"; + }; + }; + + tx-swr-data-sleep-state { + pins = "gpio1", "gpio2", "gpio14"; + function = "swr_tx_data"; + }; + }; diff --git a/dts/Bindings/pinctrl/qcom,sc7280-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sc7280-pinctrl.yaml index 7d6a2ab10e..5329fe2a43 100644 --- a/dts/Bindings/pinctrl/qcom,sc7280-pinctrl.yaml +++ b/dts/Bindings/pinctrl/qcom,sc7280-pinctrl.yaml @@ -7,11 +7,10 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Technologies, Inc. SC7280 TLMM block maintainers: - - Rajendra Nayak <rnayak@codeaurora.org> + - Bjorn Andersson <andersson@kernel.org> -description: | - This binding describes the Top Level Mode Multiplexer block found in the - SC7280 platform. +description: + Top Level Mode Multiplexer pin controller in Qualcomm SC7280 SoC. properties: compatible: @@ -24,35 +23,30 @@ properties: description: Specifies the TLMM summary IRQ maxItems: 1 - interrupt-controller: true + gpio-reserved-ranges: + minItems: 1 + maxItems: 88 - '#interrupt-cells': - description: - Specifies the PIN numbers and Flags, as defined in defined in - include/dt-bindings/interrupt-controller/irq.h - const: 2 - - gpio-controller: true - - '#gpio-cells': - description: Specifying the pin number and flags, as defined in - include/dt-bindings/gpio/gpio.h - const: 2 - - gpio-ranges: - maxItems: 1 - - wakeup-parent: - maxItems: 1 + gpio-line-names: + maxItems: 175 -#PIN CONFIGURATION NODES patternProperties: - '-pins$': + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sc7280-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sc7280-tlmm-state" + additionalProperties: false + +$defs: + qcom-sc7280-tlmm-state: type: object description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. - $ref: "/schemas/pinctrl/pincfg-node.yaml" + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -61,7 +55,7 @@ patternProperties: subnode. items: oneOf: - - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-4])$" + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-6][0-9]|17[0-4])$" - enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ] minItems: 1 @@ -101,58 +95,36 @@ patternProperties: uim1_clk, uim1_data, uim1_present, uim1_reset, usb2phy_ac, usb_phy, vfr_0, vfr_1, vsense_trigger ] - drive-strength: - enum: [2, 4, 6, 8, 10, 12, 14, 16] - default: 2 - description: - Selects the drive strength for the specified pins, in mA. - - bias-pull-down: true - - bias-pull-up: true - - bias-disable: true - - output-high: true - - output-low: true - required: - pins - - function - additionalProperties: false +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# required: - compatible - reg - - interrupts - - interrupt-controller - - '#interrupt-cells' - - gpio-controller - - '#gpio-cells' - - gpio-ranges -additionalProperties: false +unevaluatedProperties: false examples: - | - #include <dt-bindings/interrupt-controller/arm-gic.h> - tlmm: pinctrl@f000000 { - compatible = "qcom,sc7280-pinctrl"; - reg = <0xf000000 0x1000000>; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-ranges = <&tlmm 0 0 175>; - wakeup-parent = <&pdc>; - - qup_uart5_default: qup-uart5-pins { - pins = "gpio46", "gpio47"; - function = "qup13"; - drive-strength = <2>; - bias-disable; - }; + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@f000000 { + compatible = "qcom,sc7280-pinctrl"; + reg = <0xf000000 0x1000000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 175>; + wakeup-parent = <&pdc>; + + qup_uart5_default: qup-uart5-state { + pins = "gpio46", "gpio47"; + function = "qup13"; + drive-strength = <2>; + bias-disable; }; + }; diff --git a/dts/Bindings/pinctrl/qcom,sc8180x-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sc8180x-tlmm.yaml index a82dab8983..c122bb849f 100644 --- a/dts/Bindings/pinctrl/qcom,sc8180x-pinctrl.yaml +++ b/dts/Bindings/pinctrl/qcom,sc8180x-tlmm.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/pinctrl/qcom,sc8180x-pinctrl.yaml# +$id: http://devicetree.org/schemas/pinctrl/qcom,sc8180x-tlmm.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Technologies, Inc. SC8180X TLMM block @@ -9,9 +9,8 @@ title: Qualcomm Technologies, Inc. SC8180X TLMM block maintainers: - Bjorn Andersson <bjorn.andersson@linaro.org> -description: | - This binding describes the Top Level Mode Multiplexer block found in the - SC8180X platform. +description: + Top Level Mode Multiplexer pin controller in Qualcomm SC8180X SoC. allOf: - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# @@ -25,41 +24,32 @@ properties: reg-names: items: - - const: "west" - - const: "east" - - const: "south" - - interrupts: true - interrupt-controller: true - '#interrupt-cells': true - gpio-controller: true - gpio-reserved-ranges: true - '#gpio-cells': true - gpio-ranges: true - wakeup-parent: true + - const: west + - const: east + - const: south -required: - - compatible - - reg - - reg-names + interrupts: + maxItems: 1 -additionalProperties: false + gpio-reserved-ranges: true patternProperties: - '-state$': + "-state$": oneOf: - $ref: "#/$defs/qcom-sc8180x-tlmm-state" - patternProperties: - ".*": + "-pins$": $ref: "#/$defs/qcom-sc8180x-tlmm-state" + additionalProperties: false -'$defs': +$defs: qcom-sc8180x-tlmm-state: type: object description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state" + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -100,53 +90,49 @@ patternProperties: usb0_phy, usb1_phy, usb2phy_ac, vfr_1, vsense_trigger, wlan1_adc, wlan2_adc, wmss_reset ] - bias-disable: true - bias-pull-down: true - bias-pull-up: true - drive-strength: true - input-enable: true - output-high: true - output-low: true - required: - pins - - function - additionalProperties: false +required: + - compatible + - reg + - reg-names + +unevaluatedProperties: false examples: - | - #include <dt-bindings/interrupt-controller/arm-gic.h> - pinctrl@3100000 { - compatible = "qcom,sc8180x-tlmm"; - reg = <0x03100000 0x300000>, - <0x03500000 0x700000>, - <0x03d00000 0x300000>; - reg-names = "west", "east", "south"; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-ranges = <&tlmm 0 0 190>; - - gpio-wo-subnode-state { - pins = "gpio1"; - function = "gpio"; - }; - - uart-w-subnodes-state { - rx { - pins = "gpio4"; - function = "qup6"; - bias-pull-up; - }; - - tx { - pins = "gpio5"; - function = "qup6"; - bias-disable; - }; - }; + #include <dt-bindings/interrupt-controller/arm-gic.h> + pinctrl@3100000 { + compatible = "qcom,sc8180x-tlmm"; + reg = <0x03100000 0x300000>, + <0x03500000 0x700000>, + <0x03d00000 0x300000>; + reg-names = "west", "east", "south"; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 190>; + + gpio-wo-subnode-state { + pins = "gpio1"; + function = "gpio"; + }; + + uart-w-subnodes-state { + rx-pins { + pins = "gpio4"; + function = "qup6"; + bias-pull-up; + }; + + tx-pins { + pins = "gpio5"; + function = "qup6"; + bias-disable; + }; }; + }; ... diff --git a/dts/Bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml new file mode 100644 index 0000000000..240e6d45cc --- /dev/null +++ b/dts/Bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml @@ -0,0 +1,114 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SC8280XP SoC LPASS LPI TLMM + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem + (LPASS) Low Power Island (LPI) of Qualcomm SC8280XP SoC. + +properties: + compatible: + const: qcom,sc8280xp-lpass-lpi-pinctrl + + reg: + items: + - description: LPASS LPI TLMM Control and Status registers + - description: LPASS LPI MCC registers + + clocks: + items: + - description: LPASS Core voting clock + - description: LPASS Audio voting clock + + clock-names: + items: + - const: core + - const: audio + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sc8280xp-lpass-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sc8280xp-lpass-state" + additionalProperties: false + +$defs: + qcom-sc8280xp-lpass-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + pattern: "^gpio([0-9]|1[0-8])$" + + function: + enum: [ swr_tx_clk, swr_tx_data, swr_rx_clk, swr_rx_data, + dmic1_clk, dmic1_data, dmic2_clk, dmic2_data, dmic4_clk, + dmic4_data, i2s2_clk, i2s2_ws, dmic3_clk, dmic3_data, + qua_mi2s_sclk, qua_mi2s_ws, qua_mi2s_data, i2s1_clk, i2s1_ws, + i2s1_data, wsa_swr_clk, wsa_swr_data, wsa2_swr_clk, + wsa2_swr_data, i2s2_data, i2s3_clk, i2s3_ws, i2s3_data, + ext_mclk1_c, ext_mclk1_b, ext_mclk1_a ] + description: + Specify the alternative function to be configured for the specified + pins. + +allOf: + - $ref: qcom,lpass-lpi-common.yaml# + +required: + - compatible + - reg + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/sound/qcom,q6afe.h> + pinctrl@33c0000 { + compatible = "qcom,sc8280xp-lpass-lpi-pinctrl"; + reg = <0x33c0000 0x20000>, + <0x3550000 0x10000>; + clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "core", "audio"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpi_tlmm 0 0 19>; + + dmic01-state { + dmic01-clk-pins { + pins = "gpio16"; + function = "dmic1_clk"; + }; + + dmic01-clk-sleep-pins { + pins = "gpio16"; + function = "dmic1_clk"; + }; + }; + + tx-swr-data-sleep-state { + pins = "gpio0", "gpio1"; + function = "swr_tx_data"; + }; + }; diff --git a/dts/Bindings/pinctrl/qcom,sc8280xp-tlmm.yaml b/dts/Bindings/pinctrl/qcom,sc8280xp-tlmm.yaml new file mode 100644 index 0000000000..ed344deaf8 --- /dev/null +++ b/dts/Bindings/pinctrl/qcom,sc8280xp-tlmm.yaml @@ -0,0 +1,137 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sc8280xp-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. SC8280XP TLMM block + +maintainers: + - Bjorn Andersson <bjorn.andersson@linaro.org> + +description: | + Top Level Mode Multiplexer pin controller in Qualcomm SC8280XP SoC. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,sc8280xp-tlmm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-reserved-ranges: true + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sc8280xp-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sc8280xp-tlmm-state" + additionalProperties: false + +$defs: + qcom-sc8280xp-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-1][0-9]|22[0-7])$" + - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset, ufs1_reset ] + minItems: 1 + maxItems: 16 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ atest_char, atest_usb, audio_ref, cam_mclk, cci_async, cci_i2c, + cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, + cci_timer5, cci_timer6, cci_timer7, cci_timer8, cci_timer9, + cmu_rng, cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, + ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3, ddr_pxi4, ddr_pxi5, + ddr_pxi6, ddr_pxi7, dp2_hot, dp3_hot, edp0_lcd, edp1_lcd, + edp2_lcd, edp3_lcd, edp_hot, emac0_dll, emac0_mcg0, emac0_mcg1, + emac0_mcg2, emac0_mcg3, emac0_phy, emac0_ptp, emac1_dll0, + emac1_dll1, emac1_mcg0, emac1_mcg1, emac1_mcg2, emac1_mcg3, + emac1_phy, emac1_ptp, gcc_gp1, gcc_gp2, gcc_gp3, gcc_gp4, + gcc_gp5, gpio, hs1_mi2s, hs2_mi2s, hs3_mi2s, ibi_i3c, + jitter_bist, lpass_slimbus, mdp0_vsync0, mdp0_vsync1, + mdp0_vsync2, mdp0_vsync3, mdp0_vsync4, mdp0_vsync5, + mdp0_vsync6, mdp0_vsync7, mdp0_vsync8, mdp1_vsync0, + mdp1_vsync1, mdp1_vsync2, mdp1_vsync3, mdp1_vsync4, + mdp1_vsync5, mdp1_vsync6, mdp1_vsync7, mdp1_vsync8, mdp_vsync, + mi2s0_data0, mi2s0_data1, mi2s0_sck, mi2s0_ws, mi2s1_data0, + mi2s1_data1, mi2s1_sck, mi2s1_ws, mi2s2_data0, mi2s2_data1, + mi2s2_sck, mi2s2_ws, mi2s_mclk1, mi2s_mclk2, pcie2a_clkreq, + pcie2b_clkreq, pcie3a_clkreq, pcie3b_clkreq, pcie4_clkreq, + phase_flag, pll_bist, pll_clk, prng_rosc0, prng_rosc1, + prng_rosc2, prng_rosc3, qdss_cti, qdss_gpio, qspi, qspi_clk, + qspi_cs, qup0, qup1, qup2, qup3, qup4, qup5, qup6, qup7, qup8, + qup9, qup10, qup11, qup12, qup13, qup14, qup15, qup16, qup17, + qup18, qup19, qup20, qup21, qup22, qup23, rgmii_0, rgmii_1, + sd_write, sdc40, sdc42, sdc43, sdc4_clk, sdc4_cmd, tb_trig, + tgu, tsense_pwm1, tsense_pwm2, tsense_pwm3, tsense_pwm4, + usb0_dp, usb0_phy, usb0_sbrx, usb0_sbtx, usb0_usb4, usb1_dp, + usb1_phy, usb1_sbrx, usb1_sbtx, usb1_usb4, usb2phy_ac, + vsense_trigger ] + + required: + - pins + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + pinctrl@f100000 { + compatible = "qcom,sc8280xp-tlmm"; + reg = <0x0f100000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 230>; + + gpio-wo-subnode-state { + pins = "gpio1"; + function = "gpio"; + }; + + uart-w-subnodes-state { + rx-pins { + pins = "gpio4"; + function = "qup14"; + bias-pull-up; + }; + + tx-pins { + pins = "gpio5"; + function = "qup14"; + bias-disable; + }; + }; + }; +... diff --git a/dts/Bindings/pinctrl/qcom,sdm630-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sdm630-pinctrl.yaml new file mode 100644 index 0000000000..a00cb43df1 --- /dev/null +++ b/dts/Bindings/pinctrl/qcom,sdm630-pinctrl.yaml @@ -0,0 +1,173 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sdm630-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SDM630 and SDM660 TLMM pin controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm SDM630 and SDM660 SoC. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + enum: + - qcom,sdm630-pinctrl + - qcom,sdm660-pinctrl + + reg: + maxItems: 3 + + reg-names: + items: + - const: south + - const: center + - const: north + + interrupts: + maxItems: 1 + + gpio-reserved-ranges: + minItems: 1 + maxItems: 57 + + gpio-line-names: + maxItems: 114 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sdm630-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sdm630-tlmm-state" + additionalProperties: false + +$defs: + qcom-sdm630-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9]|11[0-3])$" + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, sdc2_clk, + sdc2_cmd, sdc2_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + enum: [ adsp_ext, agera_pll, atest_char, atest_char0, atest_char1, + atest_char2, atest_char3, atest_gpsadc0, atest_gpsadc1, + atest_tsens, atest_tsens2, atest_usb1, atest_usb10, + atest_usb11, atest_usb12, atest_usb13, atest_usb2, atest_usb20, + atest_usb21, atest_usb22, atest_usb23, audio_ref, bimc_dte0, + bimc_dte1, blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, + blsp_i2c5, blsp_i2c6, blsp_i2c7, blsp_i2c8_a, blsp_i2c8_b, + blsp_spi1, blsp_spi2, blsp_spi3, blsp_spi3_cs1, blsp_spi3_cs2, + blsp_spi4, blsp_spi5, blsp_spi6, blsp_spi7, blsp_spi8_a, + blsp_spi8_b, blsp_spi8_cs1, blsp_spi8_cs2, blsp_uart1, + blsp_uart2, blsp_uart5, blsp_uart6_a, blsp_uart6_b, blsp_uim1, + blsp_uim2, blsp_uim5, blsp_uim6, cam_mclk, cci_async, cci_i2c, + cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, gcc_gp1, + gcc_gp2, gcc_gp3, gpio, gps_tx_a, gps_tx_b, gps_tx_c, + isense_dbg, jitter_bist, ldo_en, ldo_update, m_voc, mdp_vsync, + mdss_vsync0, mdss_vsync1, mdss_vsync2, mdss_vsync3, mss_lte, + nav_pps_a, nav_pps_b, nav_pps_c, pa_indicator, phase_flag0, + phase_flag1, phase_flag10, phase_flag11, phase_flag12, + phase_flag13, phase_flag14, phase_flag15, phase_flag16, + phase_flag17, phase_flag18, phase_flag19, phase_flag2, + phase_flag20, phase_flag21, phase_flag22, phase_flag23, + phase_flag24, phase_flag25, phase_flag26, phase_flag27, + phase_flag28, phase_flag29, phase_flag3, phase_flag30, + phase_flag31, phase_flag4, phase_flag5, phase_flag6, + phase_flag7, phase_flag8, phase_flag9, pll_bypassnl, pll_reset, + pri_mi2s, pri_mi2s_ws, prng_rosc, pwr_crypto, pwr_modem, + pwr_nav, qdss_cti0_a, qdss_cti0_b, qdss_cti1_a, qdss_cti1_b, + qdss_gpio, qdss_gpio0, qdss_gpio1, qdss_gpio10, qdss_gpio11, + qdss_gpio12, qdss_gpio13, qdss_gpio14, qdss_gpio15, qdss_gpio2, + qdss_gpio3, qdss_gpio4, qdss_gpio5, qdss_gpio6, qdss_gpio7, + qdss_gpio8, qdss_gpio9, qlink_enable, qlink_request, qspi_clk, + qspi_cs, qspi_data0, qspi_data1, qspi_data2, qspi_data3, + qspi_resetn, sec_mi2s, sndwire_clk, sndwire_data, sp_cmu, + ssc_irq, tgu_ch0, tgu_ch1, tsense_pwm1, tsense_pwm2, uim1_clk, + uim1_data, uim1_present, uim1_reset, uim2_clk, uim2_data, + uim2_present, uim2_reset, uim_batt, vfr_1, vsense_clkout, + vsense_data0, vsense_data1, vsense_mode, wlan1_adc0, + wlan1_adc1, wlan2_adc0, wlan2_adc1 ] + + required: + - pins + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + tlmm: pinctrl@3100000 { + compatible = "qcom,sdm630-pinctrl"; + reg = <0x03100000 0x400000>, + <0x03500000 0x400000>, + <0x03900000 0x400000>; + reg-names = "south", "center", "north"; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 114>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + blsp1-uart1-default-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_uart1_default: blsp2-uart1-active-state { + tx-rts-pins { + pins = "gpio16", "gpio19"; + function = "blsp_uart5"; + drive-strength = <2>; + bias-disable; + }; + + rx-pins { + pins = "gpio17"; + function = "blsp_uart5"; + drive-strength = <2>; + bias-pull-up; + }; + + cts-pins { + pins = "gpio18"; + function = "blsp_uart5"; + drive-strength = <2>; + bias-pull-down; + }; + }; + }; diff --git a/dts/Bindings/pinctrl/qcom,sdm660-pinctrl.txt b/dts/Bindings/pinctrl/qcom,sdm660-pinctrl.txt deleted file mode 100644 index be034d329e..0000000000 --- a/dts/Bindings/pinctrl/qcom,sdm660-pinctrl.txt +++ /dev/null @@ -1,191 +0,0 @@ -Qualcomm Technologies, Inc. SDM660 TLMM block - -This binding describes the Top Level Mode Multiplexer block found in the -SDM660 platform. - -- compatible: - Usage: required - Value type: <string> - Definition: must be "qcom,sdm660-pinctrl" or - "qcom,sdm630-pinctrl". - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: the base address and size of the north, center and south - TLMM tiles. - -- reg-names: - Usage: required - Value type: <stringlist> - Definition: names for the cells of reg, must contain "north", "center" - and "south". - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify the TLMM summary IRQ. - -- interrupt-controller: - Usage: required - Value type: <none> - Definition: identifies this node as an interrupt controller - -- #interrupt-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/interrupt-controller/irq.h> - -- gpio-controller: - Usage: required - Value type: <none> - Definition: identifies this node as a gpio controller - -- gpio-ranges: - Usage: required - Value type: <prop-encoded-array> - Definition: Specifies the mapping between gpio controller and - pin-controller pins. - -- #gpio-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/gpio/gpio.h> - -Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for -a general description of GPIO and interrupt bindings. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -The pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, drive strength, etc. - - -PIN CONFIGURATION NODES: - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pin configuration subnode: - -- pins: - Usage: required - Value type: <string-array> - Definition: List of gpio pins affected by the properties specified in - this subnode. Valid pins are: - gpio0-gpio113, - Supports mux, bias and drive-strength - sdc1_clk, sdc1_cmd, sdc1_data sdc2_clk, sdc2_cmd, sdc2_data sdc1_rclk, - Supports bias and drive-strength - -- function: - Usage: required - Value type: <string> - Definition: Specify the alternative function to be configured for the - specified pins. Functions are only valid for gpio pins. - Valid values are: - adsp_ext, agera_pll, atest_char, atest_char0, atest_char1, - atest_char2, atest_char3, atest_gpsadc0, atest_gpsadc1, - atest_tsens, atest_tsens2, atest_usb1, atest_usb10, - atest_usb11, atest_usb12, atest_usb13, atest_usb2, - atest_usb20, atest_usb21, atest_usb22, atest_usb23, - audio_ref, bimc_dte0, bimc_dte1, blsp_i2c1, blsp_i2c2, - blsp_i2c3, blsp_i2c4, blsp_i2c5, blsp_i2c6, blsp_i2c7, - blsp_i2c8_a, blsp_i2c8_b, blsp_spi1, blsp_spi2, blsp_spi3, - blsp_spi3_cs1, blsp_spi3_cs2, blsp_spi4, blsp_spi5, - blsp_spi6, blsp_spi7, blsp_spi8_a, blsp_spi8_b, - blsp_spi8_cs1, blsp_spi8_cs2, blsp_uart1, blsp_uart2, - blsp_uart5, blsp_uart6_a, blsp_uart6_b, blsp_uim1, - blsp_uim2, blsp_uim5, blsp_uim6, cam_mclk, cci_async, - cci_i2c, cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, - gcc_gp1, gcc_gp2, gcc_gp3, gpio, gps_tx_a, gps_tx_b, gps_tx_c, - isense_dbg, jitter_bist, ldo_en, ldo_update, m_voc, mdp_vsync, - mdss_vsync0, mdss_vsync1, mdss_vsync2, mdss_vsync3, mss_lte, - nav_pps_a, nav_pps_b, nav_pps_c, pa_indicator, phase_flag0, - phase_flag1, phase_flag10, phase_flag11, phase_flag12, - phase_flag13, phase_flag14, phase_flag15, phase_flag16, - phase_flag17, phase_flag18, phase_flag19, phase_flag2, - phase_flag20, phase_flag21, phase_flag22, phase_flag23, - phase_flag24, phase_flag25, phase_flag26, phase_flag27, - phase_flag28, phase_flag29, phase_flag3, phase_flag30, - phase_flag31, phase_flag4, phase_flag5, phase_flag6, - phase_flag7, phase_flag8, phase_flag9, pll_bypassnl, - pll_reset, pri_mi2s, pri_mi2s_ws, prng_rosc, pwr_crypto, - pwr_modem, pwr_nav, qdss_cti0_a, qdss_cti0_b, qdss_cti1_a, - qdss_cti1_b, qdss_gpio, qdss_gpio0, qdss_gpio1, qdss_gpio10, - qdss_gpio11, qdss_gpio12, qdss_gpio13, qdss_gpio14, qdss_gpio15, - qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5, qdss_gpio6, - qdss_gpio7, qdss_gpio8, qdss_gpio9, qlink_enable, qlink_request, - qspi_clk, qspi_cs, qspi_data0, qspi_data1, qspi_data2, - qspi_data3, qspi_resetn, sec_mi2s, sndwire_clk, sndwire_data, - sp_cmu, ssc_irq, tgu_ch0, tgu_ch1, tsense_pwm1, tsense_pwm2, - uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk, - uim2_data, uim2_present, uim2_reset, uim_batt, vfr_1, - vsense_clkout, vsense_data0, vsense_data1, vsense_mode, - wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1 - -- bias-disable: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as no pull. - -- bias-pull-down: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull down. - -- bias-pull-up: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull up. - -- output-high: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - high. - Not valid for sdc pins. - -- output-low: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - low. - Not valid for sdc pins. - -- drive-strength: - Usage: optional - Value type: <u32> - Definition: Selects the drive strength for the specified pins, in mA. - Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 - -Example: - - tlmm: pinctrl@3100000 { - compatible = "qcom,sdm660-pinctrl"; - reg = <0x3100000 0x200000>, - <0x3500000 0x200000>, - <0x3900000 0x200000>; - reg-names = "south", "center", "north"; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - gpio-ranges = <&tlmm 0 0 114>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; diff --git a/dts/Bindings/pinctrl/qcom,sdm670-tlmm.yaml b/dts/Bindings/pinctrl/qcom,sdm670-tlmm.yaml new file mode 100644 index 0000000000..b56e717aa2 --- /dev/null +++ b/dts/Bindings/pinctrl/qcom,sdm670-tlmm.yaml @@ -0,0 +1,112 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sdm670-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. SDM670 TLMM block + +maintainers: + - Richard Acayan <mailingradian@gmail.com> + +description: | + The Top Level Mode Multiplexer (TLMM) block found in the SDM670 platform. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,sdm670-tlmm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-reserved-ranges: + minItems: 1 + maxItems: 75 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sdm670-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sdm670-tlmm-state" + additionalProperties: false + +$defs: + qcom-sdm670-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9])$" + - enum: [ ufs_reset, sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data, + sdc2_clk, sdc2_cmd, sdc2_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ adsp_ext, agera_pll, atest_char, atest_tsens, atest_tsens2, atest_usb1, atest_usb10, + atest_usb11, atest_usb12, atest_usb13, atest_usb2, atest_usb20, atest_usb21, + atest_usb22, atest_usb23, cam_mclk, cci_async, cci_i2c, cci_timer0, cci_timer1, + cci_timer2, cci_timer3, cci_timer4, copy_gp, copy_phase, dbg_out, ddr_bist, + ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3, edp_hot, edp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, + gp_pdm0, gp_pdm1, gp_pdm2, gpio, gps_tx, jitter_bist, ldo_en, ldo_update, + lpass_slimbus, m_voc, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3, + mss_lte, nav_pps, pa_indicator, pci_e0, pci_e1, phase_flag, pll_bist, pll_bypassnl, + pll_reset, pri_mi2s, pri_mi2s_ws, prng_rosc, qdss_cti, qdss, qlink_enable, + qlink_request, qua_mi2s, qup0, qup1, qup10, qup11, qup12, qup13, qup14, qup15, qup2, + qup3, qup4, qup5, qup6, qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, sdc4_clk, + sdc4_cmd, sdc4_data, sd_write, sec_mi2s, ter_mi2s, tgu_ch0, tgu_ch1, tgu_ch2, + tgu_ch3, tsif1_clk, tsif1_data, tsif1_en, tsif1_error, tsif1_sync, tsif2_clk, + tsif2_data, tsif2_en, tsif2_error, tsif2_sync, uim1_clk, uim1_data, uim1_present, + uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset, uim_batt, usb_phy, vfr_1, + vsense_trigger, wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1, wsa_clk, wsa_data, ] + + required: + - pins + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + pinctrl@3400000 { + compatible = "qcom,sdm670-tlmm"; + reg = <0x03400000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 151>; + + qup-i2c9-state { + pins = "gpio6", "gpio7"; + function = "qup9"; + }; + }; +... diff --git a/dts/Bindings/pinctrl/qcom,sdm845-pinctrl.txt b/dts/Bindings/pinctrl/qcom,sdm845-pinctrl.txt deleted file mode 100644 index 7462e3743c..0000000000 --- a/dts/Bindings/pinctrl/qcom,sdm845-pinctrl.txt +++ /dev/null @@ -1,176 +0,0 @@ -Qualcomm SDM845 TLMM block - -This binding describes the Top Level Mode Multiplexer block found in the -SDM845 platform. - -- compatible: - Usage: required - Value type: <string> - Definition: must be "qcom,sdm845-pinctrl" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: the base address and size of the TLMM register space. - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify the TLMM summary IRQ. - -- interrupt-controller: - Usage: required - Value type: <none> - Definition: identifies this node as an interrupt controller - -- #interrupt-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/interrupt-controller/irq.h> - -- gpio-controller: - Usage: required - Value type: <none> - Definition: identifies this node as a gpio controller - -- #gpio-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/gpio/gpio.h> - -Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for -a general description of GPIO and interrupt bindings. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -The pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, drive strength, etc. - - -PIN CONFIGURATION NODES: - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pin configuration subnode: - -- pins: - Usage: required - Value type: <string-array> - Definition: List of gpio pins affected by the properties specified in - this subnode. - - Valid pins are: - gpio0-gpio149 - Supports mux, bias and drive-strength - - sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset - Supports bias and drive-strength - -- function: - Usage: required - Value type: <string> - Definition: Specify the alternative function to be configured for the - specified pins. Functions are only valid for gpio pins. - Valid values are: - - gpio, adsp_ext, agera_pll, atest_char, atest_tsens, - atest_tsens2, atest_usb1, atest_usb10, atest_usb11, - atest_usb12, atest_usb13, atest_usb2, atest_usb20, - atest_usb21, atest_usb22, atest_usb23, audio_ref, - btfm_slimbus, cam_mclk, cci_async, cci_i2c, cci_timer0, - cci_timer1, cci_timer2, cci_timer3, cci_timer4, cri_trng, - cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, - ddr_pxi1, ddr_pxi2, ddr_pxi3, edp_hot, edp_lcd, gcc_gp1, - gcc_gp2, gcc_gp3, jitter_bist, ldo_en, ldo_update, - lpass_slimbus, m_voc, mdp_vsync, mdp_vsync0, mdp_vsync1, - mdp_vsync2, mdp_vsync3, mss_lte, nav_pps, pa_indicator, - pci_e0, pci_e1, phase_flag, pll_bist, pll_bypassnl, - pll_reset, pri_mi2s, pri_mi2s_ws, prng_rosc, qdss_cti, - qdss, qlink_enable, qlink_request, qua_mi2s, qup0, qup1, - qup10, qup11, qup12, qup13, qup14, qup15, qup2, qup3, qup4, - qup5, qup6, qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, - qspi_clk, qspi_cs, qspi_data, sd_write, sdc4_clk, sdc4_cmd, - sdc4_data, sec_mi2s, sp_cmu, spkr_i2s, ter_mi2s, tgu_ch0, - tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm1, tsense_pwm2, - tsif1_clk, tsif1_data, tsif1_en, tsif1_error, tsif1_sync, - tsif2_clk, tsif2_data, tsif2_en, tsif2_error, tsif2_sync, - uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk, - uim2_data, uim2_present, uim2_reset, uim_batt, usb_phy, - vfr_1, vsense_trigger, wlan1_adc0, wlan1_adc1, wlan2_adc0, - wlan2_adc1, - -- bias-disable: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as no pull. - -- bias-pull-down: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull down. - -- bias-pull-up: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull up. - -- output-high: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - high. - Not valid for sdc pins. - -- output-low: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - low. - Not valid for sdc pins. - -- drive-strength: - Usage: optional - Value type: <u32> - Definition: Selects the drive strength for the specified pins, in mA. - Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 - -Example: - - tlmm: pinctrl@3400000 { - compatible = "qcom,sdm845-pinctrl"; - reg = <0x03400000 0xc00000>; - interrupts = <GIC_SPI 208 0>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - - qup9_active: qup9-active { - mux { - pins = "gpio4", "gpio5"; - function = "qup9"; - }; - - config { - pins = "gpio4", "gpio5"; - drive-strength = <2>; - bias-disable; - }; - }; - }; diff --git a/dts/Bindings/pinctrl/qcom,sdm845-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sdm845-pinctrl.yaml new file mode 100644 index 0000000000..dfe5616b9b --- /dev/null +++ b/dts/Bindings/pinctrl/qcom,sdm845-pinctrl.yaml @@ -0,0 +1,154 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sdm845-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SDM845 TLMM pin controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm SDM845 SoC. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,sdm845-pinctrl + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-reserved-ranges: + minItems: 1 + maxItems: 75 + + gpio-line-names: + maxItems: 150 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sdm845-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sdm845-tlmm-state" + additionalProperties: false + + "-hog(-[0-9]+)?$": + required: + - gpio-hog + +$defs: + qcom-sdm845-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9])$" + - enum: [ ufs_reset, sdc2_clk, sdc2_cmd, sdc2_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + enum: [ adsp_ext, agera_pll, atest_char, atest_tsens, atest_tsens2, + atest_usb1, atest_usb10, atest_usb11, atest_usb12, atest_usb13, + atest_usb2, atest_usb20, atest_usb21, atest_usb22, atest_usb23, + audio_ref, btfm_slimbus, cam_mclk, cci_async, cci_i2c, + cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, + cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, + ddr_pxi1, ddr_pxi2, ddr_pxi3, edp_hot, edp_lcd, gcc_gp1, + gcc_gp2, gcc_gp3, gpio, jitter_bist, ldo_en, ldo_update, + lpass_slimbus, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2, + mdp_vsync3, mss_lte, m_voc, nav_pps, pa_indicator, pci_e0, + pci_e1, phase_flag, pll_bist, pll_bypassnl, pll_reset, + pri_mi2s, pri_mi2s_ws, prng_rosc, qdss, qdss_cti, qlink_enable, + qlink_request, qspi_clk, qspi_cs, qspi_data, qua_mi2s, qup0, + qup1, qup10, qup11, qup12, qup13, qup14, qup15, qup2, qup3, + qup4, qup5, qup6, qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, + sdc4_clk, sdc4_cmd, sdc4_data, sd_write, sec_mi2s, sp_cmu, + spkr_i2s, ter_mi2s, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, + tsense_pwm1, tsense_pwm2, tsif1_clk, tsif1_data, tsif1_en, + tsif1_error, tsif1_sync, tsif2_clk, tsif2_data, tsif2_en, + tsif2_error, tsif2_sync, uim1_clk, uim1_data, uim1_present, + uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset, + uim_batt, usb_phy, vfr_1, vsense_trigger, wlan1_adc0, + wlan1_adc1, wlan2_adc0, wlan2_adc1] + + required: + - pins + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + pinctrl@3400000 { + compatible = "qcom,sdm845-pinctrl"; + reg = <0x03400000 0xc00000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 151>; + wakeup-parent = <&pdc_intc>; + + ap-suspend-l-hog { + gpio-hog; + gpios = <126 GPIO_ACTIVE_LOW>; + output-low; + }; + + cci0-default-state { + pins = "gpio17", "gpio18"; + function = "cci_i2c"; + + bias-pull-up; + drive-strength = <2>; + }; + + cam0-default-state { + rst-pins { + pins = "gpio9"; + function = "gpio"; + + drive-strength = <16>; + bias-disable; + }; + + mclk0-pins { + pins = "gpio13"; + function = "cam_mclk"; + + drive-strength = <16>; + bias-disable; + }; + }; + }; diff --git a/dts/Bindings/pinctrl/qcom,sdx55-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sdx55-pinctrl.yaml index 112dd59ce7..edbcff92bb 100644 --- a/dts/Bindings/pinctrl/qcom,sdx55-pinctrl.yaml +++ b/dts/Bindings/pinctrl/qcom,sdx55-pinctrl.yaml @@ -9,9 +9,8 @@ title: Qualcomm Technologies, Inc. SDX55 TLMM block maintainers: - Vinod Koul <vkoul@kernel.org> -description: | - This binding describes the Top Level Mode Multiplexer block found in the - SDX55 platform. +description: + Top Level Mode Multiplexer pin controller in Qualcomm SDX55 SoC. properties: compatible: @@ -22,37 +21,28 @@ properties: maxItems: 1 interrupts: - description: Specifies the TLMM summary IRQ - maxItems: 1 - - interrupt-controller: true - - '#interrupt-cells': - description: Specifies the PIN numbers and Flags, as defined in - include/dt-bindings/interrupt-controller/irq.h - const: 2 - - gpio-controller: true - - '#gpio-cells': - description: Specifying the pin number and flags, as defined in - include/dt-bindings/gpio/gpio.h - const: 2 - - gpio-ranges: maxItems: 1 gpio-reserved-ranges: maxItems: 1 -#PIN CONFIGURATION NODES patternProperties: - '-pins$': + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sdx55-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sdx55-tlmm-state" + additionalProperties: false + +$defs: + qcom-sdx55-tlmm-state: type: object description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. - $ref: "/schemas/pinctrl/pincfg-node.yaml" + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -60,7 +50,7 @@ patternProperties: List of gpio pins affected by the properties specified in this subnode. items: oneOf: - - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-1][0-6])$" + - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-7])$" - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ] minItems: 1 maxItems: 36 @@ -96,59 +86,37 @@ patternProperties: uim1_present, uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset, usb2phy_ac, vsense_trigger ] - drive-strength: - enum: [2, 4, 6, 8, 10, 12, 14, 16] - default: 2 - description: - Selects the drive strength for the specified pins, in mA. - - bias-pull-down: true - - bias-pull-up: true - - bias-disable: true - - output-high: true - - output-low: true - required: - pins - - function - additionalProperties: false +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# required: - compatible - reg - - interrupts - - interrupt-controller - - '#interrupt-cells' - - gpio-controller - - '#gpio-cells' - - gpio-ranges -additionalProperties: false +unevaluatedProperties: false examples: - | - #include <dt-bindings/interrupt-controller/arm-gic.h> - tlmm: pinctrl@1f00000 { - compatible = "qcom,sdx55-pinctrl"; - reg = <0x0f100000 0x300000>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&tlmm 0 0 108>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>; - - serial-pins { - pins = "gpio8", "gpio9"; - function = "blsp_uart3"; - drive-strength = <8>; - bias-disable; - }; + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@1f00000 { + compatible = "qcom,sdx55-pinctrl"; + reg = <0x0f100000 0x300000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 108>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>; + + serial-state { + pins = "gpio8", "gpio9"; + function = "blsp_uart3"; + drive-strength = <8>; + bias-disable; }; + }; ... diff --git a/dts/Bindings/pinctrl/qcom,sdx65-tlmm.yaml b/dts/Bindings/pinctrl/qcom,sdx65-tlmm.yaml new file mode 100644 index 0000000000..a31b638c45 --- /dev/null +++ b/dts/Bindings/pinctrl/qcom,sdx65-tlmm.yaml @@ -0,0 +1,153 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sdx65-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. SDX65 TLMM block + +maintainers: + - Vamsi krishna Lanka <quic_vamslank@quicinc.com> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm SDX65 SoC. + +properties: + compatible: + const: qcom,sdx65-tlmm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-reserved-ranges: + maxItems: 1 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sdx65-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sdx65-tlmm-state" + additionalProperties: false + +$defs: + qcom-sdx65-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-7])$" + - enum: [ ufs_reset, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data, sdc1_rclk ] + minItems: 1 + maxItems: 150 + + function: + description: + Specify the alternative function to be configured for the specified + pins. Functions are only valid for gpio pins. + enum: [ blsp_uart1, blsp_spi1, blsp_i2c1, blsp_uim1, atest_tsens, + bimc_dte1, dac_calib0, blsp_spi8, blsp_uart8, blsp_uim8, + qdss_cti_trig_out_b, bimc_dte0, dac_calib1, qdss_cti_trig_in_b, + dac_calib2, atest_tsens2, atest_usb1, blsp_spi10, blsp_uart10, + blsp_uim10, atest_bbrx1, atest_usb13, atest_bbrx0, atest_usb12, + mdp_vsync, edp_lcd, blsp_i2c10, atest_gpsadc1, atest_usb11, + atest_gpsadc0, edp_hot, atest_usb10, m_voc, dac_gpio, atest_char, + cam_mclk, pll_bypassnl, qdss_stm7, blsp_i2c8, qdss_tracedata_b, + pll_reset, qdss_stm6, qdss_stm5, qdss_stm4, atest_usb2, cci_i2c, + qdss_stm3, dac_calib3, atest_usb23, atest_char3, dac_calib4, + qdss_stm2, atest_usb22, atest_char2, qdss_stm1, dac_calib5, + atest_usb21, atest_char1, dbg_out, qdss_stm0, dac_calib6, + atest_usb20, atest_char0, dac_calib10, qdss_stm10, + qdss_cti_trig_in_a, cci_timer4, blsp_spi6, blsp_uart6, blsp_uim6, + blsp2_spi, qdss_stm9, qdss_cti_trig_out_a, dac_calib11, + qdss_stm8, cci_timer0, qdss_stm13, dac_calib7, cci_timer1, + qdss_stm12, dac_calib8, cci_timer2, blsp1_spi, qdss_stm11, + dac_calib9, cci_timer3, cci_async, dac_calib12, blsp_i2c6, + qdss_tracectl_a, dac_calib13, qdss_traceclk_a, dac_calib14, + dac_calib15, hdmi_rcv, dac_calib16, hdmi_cec, pwr_modem, + dac_calib17, hdmi_ddc, pwr_nav, dac_calib18, pwr_crypto, + dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0, pcie_clkreq, + dac_calib22, dac_calib23, dac_calib24, tsif1_sync, dac_calib25, + sd_write, tsif1_error, blsp_spi2, blsp_uart2, blsp_uim2, + qdss_cti, blsp_i2c2, blsp_spi3, blsp_uart3, blsp_uim3, blsp_i2c3, + uim3, blsp_spi9, blsp_uart9, blsp_uim9, blsp10_spi, blsp_i2c9, + blsp_spi7, blsp_uart7, blsp_uim7, qdss_tracedata_a, blsp_i2c7, + qua_mi2s, gcc_gp1_clk_a, ssc_irq, uim4, blsp_spi11, blsp_uart11, + blsp_uim11, gcc_gp2_clk_a, gcc_gp3_clk_a, blsp_i2c11, cri_trng0, + cri_trng1, cri_trng, qdss_stm18, pri_mi2s, qdss_stm17, blsp_spi4, + blsp_uart4, blsp_uim4, qdss_stm16, qdss_stm15, blsp_i2c4, + qdss_stm14, dac_calib26, spkr_i2s, audio_ref, lpass_slimbus, + isense_dbg, tsense_pwm1, tsense_pwm2, btfm_slimbus, ter_mi2s, + qdss_stm22, qdss_stm21, qdss_stm20, qdss_stm19, gcc_gp1_clk_b, + sec_mi2s, blsp_spi5, blsp_uart5, blsp_uim5, gcc_gp2_clk_b, + gcc_gp3_clk_b, blsp_i2c5, blsp_spi12, blsp_uart12, blsp_uim12, + qdss_stm25, qdss_stm31, blsp_i2c12, qdss_stm30, qdss_stm29, + tsif1_clk, qdss_stm28, tsif1_en, tsif1_data, sdc4_cmd, qdss_stm27, + qdss_traceclk_b, tsif2_error, sdc43, vfr_1, qdss_stm26, tsif2_clk, + sdc4_clk, qdss_stm24, tsif2_en, sdc42, qdss_stm23, qdss_tracectl_b, + sd_card, tsif2_data, sdc41, tsif2_sync, sdc40, mdp_vsync_p_b, + ldo_en, mdp_vsync_s_b, ldo_update, blsp11_uart_tx_b, blsp11_uart_rx_b, + blsp11_i2c_sda_b, prng_rosc, blsp11_i2c_scl_b, uim2, uim1, uim_batt, + pci_e2, pa_indicator, adsp_ext, ddr_bist, qdss_tracedata_11, + qdss_tracedata_12, modem_tsync, nav_dr, nav_pps, pci_e1, gsm_tx, + qspi_cs, ssbi2, ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2, qspi3, + gpio ] + + required: + - pins + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@f100000 { + compatible = "qcom,sdx65-tlmm"; + reg = <0x03000000 0xdc2000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 109>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>; + + gpio-wo-subnode-state { + pins = "gpio1"; + function = "gpio"; + }; + + uart-w-subnodes-state { + rx-pins { + pins = "gpio4"; + function = "blsp_uart1"; + bias-pull-up; + }; + + tx-pins { + pins = "gpio5"; + function = "blsp_uart1"; + bias-disable; + }; + }; + }; +... diff --git a/dts/Bindings/pinctrl/qcom,sdx75-tlmm.yaml b/dts/Bindings/pinctrl/qcom,sdx75-tlmm.yaml new file mode 100644 index 0000000000..cb1d978d02 --- /dev/null +++ b/dts/Bindings/pinctrl/qcom,sdx75-tlmm.yaml @@ -0,0 +1,131 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sdx75-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. SDX75 TLMM block + +maintainers: + - Rohit Agarwal <quic_rohiagar@quicinc.com> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm SDX75 SoC. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,sdx75-tlmm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-reserved-ranges: + minItems: 1 + maxItems: 67 + + gpio-line-names: + maxItems: 133 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sdx75-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sdx75-tlmm-state" + additionalProperties: false + +$defs: + qcom-sdx75-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-2][0-9]|13[0-2])$" + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, sdc2_clk, sdc2_cmd, sdc2_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + enum: [ adsp_ext, atest_char, audio_ref_clk, bimc_dte, char_exec, coex_uart2, + coex_uart, cri_trng, cri_trng0, cri_trng1, dbg_out_clk, ddr_bist, + ddr_pxi0, ebi0_wrcdc, ebi2_a, ebi2_lcd, ebi2_lcd_te, emac0_mcg, + emac0_ptp, emac1_mcg, emac1_ptp, emac_cdc, emac_pps_in, eth0_mdc, + eth0_mdio, eth1_mdc, eth1_mdio, ext_dbg, gcc_125_clk, gcc_gp1_clk, + gcc_gp2_clk, gcc_gp3_clk, gcc_plltest, gpio, i2s_mclk, jitter_bist, + ldo_en, ldo_update, m_voc, mgpi_clk, native_char, native_tsens, + native_tsense, nav_dr_sync, nav_gpio, pa_indicator, pci_e, + pcie0_clkreq_n, pcie1_clkreq_n, pcie2_clkreq_n, pll_bist_sync, + pll_clk_aux, pll_ref_clk, pri_mi2s, prng_rosc, qdss_cti, qdss_gpio, + qlink0_b_en, qlink0_b_req, qlink0_l_en, qlink0_l_req, qlink0_wmss, + qlink1_l_en, qlink1_l_req, qlink1_wmss, qup_se0, qup_se1_l2_mira, + qup_se1_l2_mirb, qup_se1_l3_mira, qup_se1_l3_mirb, qup_se2, qup_se3, + qup_se4, qup_se5, qup_se6, qup_se7, qup_se8, rgmii_rx_ctl, rgmii_rxc, + rgmii_rxd, rgmii_tx_ctl, rgmii_txc, rgmii_txd, sd_card, sdc1_tb, + sdc2_tb_trig, sec_mi2s, sgmii_phy_intr0_n, sgmii_phy_intr1_n, + spmi_coex, spmi_vgi, tgu_ch0_trigout, tmess_prng0, tmess_prng1, + tmess_prng2, tmess_prng3, tri_mi2s, uim1_clk, uim1_data, uim1_present, + uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset, + usb2phy_ac_en, vsense_trigger_mirnat] + + required: + - pins + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@f100000 { + compatible = "qcom,sdx75-tlmm"; + reg = <0x0f100000 0x300000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 133>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + + gpio-wo-state { + pins = "gpio1"; + function = "gpio"; + }; + + uart-w-state { + rx-pins { + pins = "gpio12"; + function = "qup_se1_l2_mira"; + bias-disable; + }; + + tx-pins { + pins = "gpio13"; + function = "qup_se1_l3_mira"; + bias-disable; + }; + }; + }; +... diff --git a/dts/Bindings/pinctrl/qcom,sm4450-tlmm.yaml b/dts/Bindings/pinctrl/qcom,sm4450-tlmm.yaml new file mode 100644 index 0000000000..bb08ca5a15 --- /dev/null +++ b/dts/Bindings/pinctrl/qcom,sm4450-tlmm.yaml @@ -0,0 +1,151 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sm4450-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. SM4450 TLMM block + +maintainers: + - Tengfei Fan <quic_tengfan@quicinc.com> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm SM4450 SoC. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,sm4450-pinctrl + + reg: + maxItems: 1 + + interrupts: true + interrupt-controller: true + "#interrupt-cells": true + gpio-controller: true + + gpio-reserved-ranges: + minItems: 1 + maxItems: 68 + + gpio-line-names: + maxItems: 136 + + "#gpio-cells": true + gpio-ranges: true + wakeup-parent: true + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sm4450-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sm4450-tlmm-state" + additionalProperties: false + +$defs: + qcom-sm4450-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-2][0-9]|13[0-5])$" + - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + enum: [ gpio, atest_char, atest_char0, atest_char1, atest_char2, + atest_char3, atest_usb0, atest_usb00, atest_usb01, atest_usb02, + atest_usb03, audio_ref, cam_mclk, cci_async, cci_i2c, + cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, + cmu_rng0, cmu_rng1, cmu_rng2, cmu_rng3, coex_uart1, cri_trng, + cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, + dp0_hot, gcc_gp1, gcc_gp2, gcc_gp3, host2wlan_sol, ibi_i3c, + jitter_bist, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2, + mdp_vsync3, mi2s0_data0, mi2s0_data1, mi2s0_sck, mi2s0_ws, + mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, mi2s_mclk0, + mi2s_mclk1, nav_gpio0, nav_gpio1, nav_gpio2, pcie0_clk, + phase_flag0, phase_flag1, phase_flag10, phase_flag11, + phase_flag12, phase_flag13, phase_flag14, phase_flag15, + phase_flag16, phase_flag17, phase_flag18, phase_flag19, + phase_flag2, phase_flag20, phase_flag21, phase_flag22, + phase_flag23, phase_flag24, phase_flag25, phase_flag26, + phase_flag27, phase_flag28, phase_flag29, phase_flag3, + phase_flag30, phase_flag31, phase_flag4, phase_flag5, + phase_flag6, phase_flag7, phase_flag8, phase_flag9, + pll_bist, pll_clk, prng_rosc0, prng_rosc1, prng_rosc2, + prng_rosc3, qdss_cti, qdss_gpio, qdss_gpio0, qdss_gpio1, + qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13, qdss_gpio14, + qdss_gpio15, qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5, + qdss_gpio6, qdss_gpio7, qdss_gpio8, qdss_gpio9, qlink0_enable, + qlink0_request, qlink0_wmss, qlink1_enable, qlink1_request, + qlink1_wmss, qlink2_enable, qlink2_request, qlink2_wmss, + qup0_se0, qup0_se1, qup0_se2, qup0_se3, qup0_se4, qup0_se5, + qup0_se6, qup0_se7, qup1_se0, qup1_se1, qup1_se2, qup1_se3, + qup1_se4, qup1_se5, qup1_se6, sd_write, tb_trig, tgu_ch0, + tgu_ch1, tgu_ch2, tgu_ch3, tmess_prng0, tmess_prng1, + tmess_prng2, tmess_prng3, tsense_pwm1, tsense_pwm2, uim0_clk, + uim0_data, uim0_present, uim0_reset, uim1_clk, uim1_data, + uim1_present, uim1_reset, usb0_hs, usb0_phy, vfr_0, vfr_1, + vsense_trigger ] + + required: + - pins + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@f100000 { + compatible = "qcom,sm4450-tlmm"; + reg = <0x0f100000 0x300000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 137>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + + gpio-wo-state { + pins = "gpio1"; + function = "gpio"; + }; + + uart-w-state { + rx-pins { + pins = "gpio23"; + function = "qup1_se2"; + bias-pull-up; + }; + + tx-pins { + pins = "gpio22"; + function = "qup1_se2"; + bias-disable; + }; + }; + }; +... diff --git a/dts/Bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml new file mode 100644 index 0000000000..f4cf2ce86f --- /dev/null +++ b/dts/Bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM6115 SoC LPASS LPI TLMM + +maintainers: + - Konrad Dybcio <konradybcio@kernel.org> + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem + (LPASS) Low Power Island (LPI) of Qualcomm SM6115 SoC. + +properties: + compatible: + const: qcom,sm6115-lpass-lpi-pinctrl + + reg: + items: + - description: LPASS LPI TLMM Control and Status registers + - description: LPASS LPI MCC registers + + clocks: + items: + - description: LPASS Audio voting clock + + clock-names: + items: + - const: audio + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sm6115-lpass-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sm6115-lpass-state" + additionalProperties: false + +$defs: + qcom-sm6115-lpass-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + pattern: "^gpio([0-9]|1[0-8])$" + + function: + enum: [ dmic01_clk, dmic01_data, dmic23_clk, dmic23_data, gpio, i2s1_clk, + i2s1_data, i2s1_ws, i2s2_clk, i2s2_data, i2s2_ws, i2s3_clk, + i2s3_data, i2s3_ws, qua_mi2s_data, qua_mi2s_sclk, qua_mi2s_ws, + swr_rx_clk, swr_rx_data, swr_tx_clk, swr_tx_data, wsa_mclk ] + description: + Specify the alternative function to be configured for the specified + pins. + + +allOf: + - $ref: qcom,lpass-lpi-common.yaml# + +required: + - compatible + - reg + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/sound/qcom,q6afe.h> + + lpass_tlmm: pinctrl@a7c0000 { + compatible = "qcom,sm6115-lpass-lpi-pinctrl"; + reg = <0x0a7c0000 0x20000>, + <0x0a950000 0x10000>; + clocks = <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "audio"; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 19>; + }; diff --git a/dts/Bindings/pinctrl/qcom,sm6115-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sm6115-pinctrl.yaml deleted file mode 100644 index 8fc06f6a3e..0000000000 --- a/dts/Bindings/pinctrl/qcom,sm6115-pinctrl.yaml +++ /dev/null @@ -1,179 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/pinctrl/qcom,sm6115-pinctrl.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Qualcomm Technologies, Inc. SM6115, SM4250 TLMM block - -maintainers: - - Iskren Chernev <iskren.chernev@gmail.com> - -description: - This binding describes the Top Level Mode Multiplexer block found in the - SM4250/6115 platforms. - -properties: - compatible: - const: qcom,sm6115-tlmm - - reg: - minItems: 3 - maxItems: 3 - - reg-names: - items: - - const: west - - const: south - - const: east - - interrupts: - description: Specifies the TLMM summary IRQ - maxItems: 1 - - interrupt-controller: true - - '#interrupt-cells': - description: - Specifies the PIN numbers and Flags, as defined in defined in - include/dt-bindings/interrupt-controller/irq.h - const: 2 - - gpio-controller: true - - '#gpio-cells': - description: Specifying the pin number and flags, as defined in - include/dt-bindings/gpio/gpio.h - const: 2 - - gpio-ranges: - maxItems: 1 - - wakeup-parent: - maxItems: 1 - -#PIN CONFIGURATION NODES -patternProperties: - '-state$': - oneOf: - - $ref: "#/$defs/qcom-sm6115-tlmm-state" - - patternProperties: - ".*": - $ref: "#/$defs/qcom-sm6115-tlmm-state" - -'$defs': - qcom-sm6115-tlmm-state: - type: object - description: - Pinctrl node's client devices use subnodes for desired pin configuration. - Client device subnodes use below standard properties. - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state" - - properties: - pins: - description: - List of gpio pins affected by the properties specified in this - subnode. - items: - oneOf: - - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9]|11[0-2])$" - - enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data, - sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ] - minItems: 1 - maxItems: 36 - - function: - description: - Specify the alternative function to be configured for the specified - pins. - - enum: [ adsp_ext, agera_pll, atest, cam_mclk, cci_async, cci_i2c, - cci_timer, cri_trng, dac_calib, dbg_out, ddr_bist, ddr_pxi0, - ddr_pxi1, ddr_pxi2, ddr_pxi3, gcc_gp1, gcc_gp2, gcc_gp3, gpio, - gp_pdm0, gp_pdm1, gp_pdm2, gsm0_tx, gsm1_tx, jitter_bist, - mdp_vsync, mdp_vsync_out_0, mdp_vsync_out_1, mpm_pwr, mss_lte, - m_voc, nav_gpio, pa_indicator, pbs, pbs_out, phase_flag, - pll_bist, pll_bypassnl, pll_reset, prng_rosc, qdss_cti, - qdss_gpio, qup0, qup1, qup2, qup3, qup4, qup5, sdc1_tb, - sdc2_tb, sd_write, ssbi_wtr1, tgu, tsense_pwm, uim1_clk, - uim1_data, uim1_present, uim1_reset, uim2_clk, uim2_data, - uim2_present, uim2_reset, usb_phy, vfr_1, vsense_trigger, - wlan1_adc0, elan1_adc1 ] - - drive-strength: - enum: [2, 4, 6, 8, 10, 12, 14, 16] - default: 2 - description: - Selects the drive strength for the specified pins, in mA. - - bias-pull-down: true - - bias-pull-up: true - - bias-disable: true - - output-high: true - - output-low: true - - required: - - pins - - additionalProperties: false - -required: - - compatible - - reg - - reg-names - - interrupts - - interrupt-controller - - '#interrupt-cells' - - gpio-controller - - '#gpio-cells' - - gpio-ranges - -additionalProperties: false - -examples: - - | - #include <dt-bindings/interrupt-controller/arm-gic.h> - tlmm: pinctrl@500000 { - compatible = "qcom,sm6115-tlmm"; - reg = <0x500000 0x400000>, - <0x900000 0x400000>, - <0xd00000 0x400000>; - reg-names = "west", "south", "east"; - interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-ranges = <&tlmm 0 0 114>; - - sdc2_on_state: sdc2-on-state { - clk { - pins = "sdc2_clk"; - bias-disable; - drive-strength = <16>; - }; - - cmd { - pins = "sdc2_cmd"; - bias-pull-up; - drive-strength = <10>; - }; - - data { - pins = "sdc2_data"; - bias-pull-up; - drive-strength = <10>; - }; - - sd-cd { - pins = "gpio88"; - function = "gpio"; - bias-pull-up; - drive-strength = <2>; - }; - }; - }; diff --git a/dts/Bindings/pinctrl/qcom,sm6115-tlmm.yaml b/dts/Bindings/pinctrl/qcom,sm6115-tlmm.yaml new file mode 100644 index 0000000000..7f36f9b933 --- /dev/null +++ b/dts/Bindings/pinctrl/qcom,sm6115-tlmm.yaml @@ -0,0 +1,138 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sm6115-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. SM6115, SM4250 TLMM block + +maintainers: + - Iskren Chernev <iskren.chernev@gmail.com> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm SM4250 and SM6115 + SoCs. + +properties: + compatible: + const: qcom,sm6115-tlmm + + reg: + maxItems: 3 + + reg-names: + items: + - const: west + - const: south + - const: east + + interrupts: + maxItems: 1 + + gpio-reserved-ranges: true + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sm6115-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sm6115-tlmm-state" + additionalProperties: false + +$defs: + qcom-sm6115-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9]|11[0-2])$" + - enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data, + sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ adsp_ext, agera_pll, atest, cam_mclk, cci_async, cci_i2c, + cci_timer, cri_trng, dac_calib, dbg_out, ddr_bist, ddr_pxi0, + ddr_pxi1, ddr_pxi2, ddr_pxi3, gcc_gp1, gcc_gp2, gcc_gp3, gpio, + gp_pdm0, gp_pdm1, gp_pdm2, gsm0_tx, gsm1_tx, jitter_bist, + mdp_vsync, mdp_vsync_out_0, mdp_vsync_out_1, mpm_pwr, mss_lte, + m_voc, nav_gpio, pa_indicator, pbs, pbs_out, phase_flag, + pll_bist, pll_bypassnl, pll_reset, prng_rosc, qdss_cti, + qdss_gpio, qup0, qup1, qup2, qup3, qup4, qup5, sdc1_tb, + sdc2_tb, sd_write, ssbi_wtr1, tgu, tsense_pwm, uim1_clk, + uim1_data, uim1_present, uim1_reset, uim2_clk, uim2_data, + uim2_present, uim2_reset, usb_phy, vfr_1, vsense_trigger, + wlan1_adc0, elan1_adc1 ] + + required: + - pins + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +required: + - compatible + - reg + - reg-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@500000 { + compatible = "qcom,sm6115-tlmm"; + reg = <0x500000 0x400000>, + <0x900000 0x400000>, + <0xd00000 0x400000>; + reg-names = "west", "south", "east"; + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 114>; + + sdc2_on_state: sdc2-on-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + + sd-cd-pins { + pins = "gpio88"; + function = "gpio"; + bias-pull-up; + drive-strength = <2>; + }; + }; + }; diff --git a/dts/Bindings/pinctrl/qcom,sm6125-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sm6125-tlmm.yaml index 5f7adaa81f..ddeaeaa9a4 100644 --- a/dts/Bindings/pinctrl/qcom,sm6125-pinctrl.yaml +++ b/dts/Bindings/pinctrl/qcom,sm6125-tlmm.yaml @@ -1,16 +1,15 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/pinctrl/qcom,sm6125-pinctrl.yaml# +$id: http://devicetree.org/schemas/pinctrl/qcom,sm6125-tlmm.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Technologies, Inc. SM6125 TLMM block maintainers: - Martin Botka <martin.botka@somainline.org> -description: | - This binding describes the Top Level Mode Multiplexer (TLMM) block found - in the SM6125 platform. +description: + Top Level Mode Multiplexer pin controller in Qualcomm SM6125 SoC. allOf: - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# @@ -20,38 +19,27 @@ properties: const: qcom,sm6125-tlmm reg: - minItems: 3 maxItems: 3 reg-names: items: - - const: "west" - - const: "south" - - const: "east" - - interrupts: true - interrupt-controller: true - '#interrupt-cells': true - gpio-controller: true - gpio-reserved-ranges: true - '#gpio-cells': true - gpio-ranges: true - wakeup-parent: true + - const: west + - const: south + - const: east -required: - - compatible - - reg - - reg-names + interrupts: + maxItems: 1 -additionalProperties: false + gpio-reserved-ranges: true patternProperties: - '-state$': + "-state$": oneOf: - $ref: "#/$defs/qcom-sm6125-tlmm-state" - patternProperties: - ".*": + "-pins$": $ref: "#/$defs/qcom-sm6125-tlmm-state" + additionalProperties: false $defs: qcom-sm6125-tlmm-state: @@ -59,7 +47,8 @@ $defs: description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state" + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -100,33 +89,49 @@ $defs: wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1, wsa_clk, wsa_data ] - bias-disable: true - bias-pull-down: true - bias-pull-up: true - drive-strength: true - input-enable: true - output-high: true - output-low: true - required: - pins - - function - additionalProperties: false +required: + - compatible + - reg + - reg-names + +unevaluatedProperties: false examples: - | - #include <dt-bindings/interrupt-controller/arm-gic.h> - pinctrl@500000 { - compatible = "qcom,sm6125-tlmm"; - reg = <0x00500000 0x400000>, - <0x00900000 0x400000>, - <0x00d00000 0x400000>; - reg-names = "west", "south", "east"; - interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - gpio-ranges = <&tlmm 0 0 134>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; + #include <dt-bindings/interrupt-controller/arm-gic.h> + pinctrl@500000 { + compatible = "qcom,sm6125-tlmm"; + reg = <0x00500000 0x400000>, + <0x00900000 0x400000>, + <0x00d00000 0x400000>; + reg-names = "west", "south", "east"; + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 134>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + sdc2-off-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <2>; + bias-pull-up; + }; }; + }; diff --git a/dts/Bindings/pinctrl/qcom,sm6350-tlmm.yaml b/dts/Bindings/pinctrl/qcom,sm6350-tlmm.yaml new file mode 100644 index 0000000000..a4771f87d9 --- /dev/null +++ b/dts/Bindings/pinctrl/qcom,sm6350-tlmm.yaml @@ -0,0 +1,148 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sm6350-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. SM6350 TLMM block + +maintainers: + - Konrad Dybcio <konrad.dybcio@somainline.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm SM6350 SoC. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,sm6350-tlmm + + reg: + maxItems: 1 + + interrupts: + minItems: 9 + maxItems: 9 + + gpio-reserved-ranges: + minItems: 1 + maxItems: 78 + + gpio-line-names: + maxItems: 156 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sm6350-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sm6350-tlmm-state" + additionalProperties: false + +$defs: + qcom-sm6350-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9]|15[0-5])$" + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ adsp_ext, agera_pll, atest_char, atest_char0, atest_char1, atest_char2, + atest_char3, atest_tsens, atest_tsens2, atest_usb1, atest_usb10, atest_usb11, + atest_usb12, atest_usb13, atest_usb2, atest_usb20, atest_usb21, atest_usb22, + atest_usb23, audio_ref, btfm_slimbus, cam_mclk0, cam_mclk1, cam_mclk2, cam_mclk3, + cam_mclk4, cci_async, cci_i2c, cci_timer0, cci_timer1, cci_timer2, cci_timer3, + cci_timer4, cri_trng, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3, + dp_hot, edp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, gp_pdm0, gp_pdm1, gp_pdm2, gpio, + gps_tx, ibi_i3c, jitter_bist, ldo_en, ldo_update, lpass_ext, m_voc, mclk, + mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s_0, mi2s_1, mi2s_2, + mss_lte, nav_gpio, nav_pps, pa_indicator, pcie0_clk, phase_flag0, phase_flag1, + phase_flag10, phase_flag11, phase_flag12, phase_flag13, phase_flag14, phase_flag15, + phase_flag16, phase_flag17, phase_flag18, phase_flag19, phase_flag2, phase_flag20, + phase_flag21, phase_flag22, phase_flag23, phase_flag24, phase_flag25, phase_flag26, + phase_flag27, phase_flag28, phase_flag29, phase_flag3, phase_flag30, phase_flag31, + phase_flag4, phase_flag5, phase_flag6, phase_flag7, phase_flag8, phase_flag9, + pll_bist, pll_bypassnl, pll_reset, prng_rosc, qdss_cti, qdss_gpio, qdss_gpio0, + qdss_gpio1, qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13, qdss_gpio14, + qdss_gpio15, qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5, qdss_gpio6, + qdss_gpio7, qdss_gpio8, qdss_gpio9, qlink0_enable, qlink0_request, qlink0_wmss, + qlink1_enable, qlink1_request, qlink1_wmss, qup00, qup01, qup02, qup10, qup11, + qup12, qup13_f1, qup13_f2, qup14, rffe0_clk, rffe0_data, rffe1_clk, rffe1_data, + rffe2_clk, rffe2_data, rffe3_clk, rffe3_data, rffe4_clk, rffe4_data, sd_write, + sdc1_tb, sdc2_tb, sp_cmu, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm1, + tsense_pwm2, uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk, uim2_data, + uim2_present, uim2_reset, usb_phy, vfr_1, vsense_trigger, wlan1_adc0, wlan1_adc1, + wlan2_adc0, wlan2_adc1, ] + + required: + - pins + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + pinctrl@f100000 { + compatible = "qcom,sm6350-tlmm"; + reg = <0x0f100000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>; + + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 157>; + + gpio-wo-subnode-state { + pins = "gpio1"; + function = "gpio"; + }; + + uart-w-subnodes-state { + rx-pins { + pins = "gpio25"; + function = "qup13_f2"; + bias-disable; + }; + + tx-pins { + pins = "gpio26"; + function = "qup13_f2"; + bias-disable; + }; + }; + }; +... diff --git a/dts/Bindings/pinctrl/qcom,sm6375-tlmm.yaml b/dts/Bindings/pinctrl/qcom,sm6375-tlmm.yaml new file mode 100644 index 0000000000..047f82863f --- /dev/null +++ b/dts/Bindings/pinctrl/qcom,sm6375-tlmm.yaml @@ -0,0 +1,142 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sm6375-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. SM6375 TLMM block + +maintainers: + - Konrad Dybcio <konrad.dybcio@somainline.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm SM6375 SoC. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,sm6375-tlmm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-reserved-ranges: true + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sm6375-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sm6375-tlmm-state" + additionalProperties: false + +$defs: + qcom-sm6375-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9]|15[0-5])$" + - enum: [ ufs_reset, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, + sdc2_cmd, sdc2_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ adsp_ext, agera_pll, atest_char, atest_char0, atest_char1, + atest_char2, atest_char3, atest_tsens, atest_tsens2, + atest_usb1, atest_usb10, atest_usb11, atest_usb12, + atest_usb13, atest_usb2, atest_usb20, atest_usb21, + atest_usb22, atest_usb23, audio_ref, btfm_slimbus, cam_mclk, + cci_async, cci_i2c, cci_timer0, cci_timer1, cci_timer2, + cci_timer3, cci_timer4, cri_trng, dbg_out, ddr_bist, + ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3, dp_hot, edp_lcd, + gcc_gp1, gcc_gp2, gcc_gp3, gp_pdm0, gp_pdm1, gp_pdm2, gpio, + gps_tx, ibi_i3c, jitter_bist, ldo_en, ldo_update, lpass_ext, + m_voc, mclk, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2, + mdp_vsync3, mi2s_0, mi2s_1, mi2s_2, mss_lte, nav_gpio, + nav_pps, pa_indicator, phase_flag0, phase_flag1, phase_flag10, + phase_flag11, phase_flag12, phase_flag13, phase_flag14, + phase_flag15, phase_flag16, phase_flag17, phase_flag18, + phase_flag19, phase_flag2, phase_flag20, phase_flag21, + phase_flag22, phase_flag23, phase_flag24, phase_flag25, + phase_flag26, phase_flag27, phase_flag28, phase_flag29, + phase_flag3, phase_flag30, phase_flag31, phase_flag4, + phase_flag5, phase_flag6, phase_flag7, phase_flag8, + phase_flag9, pll_bist, pll_bypassnl, pll_clk, pll_reset, + prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, qdss_cti, + qdss_gpio, qdss_gpio0, qdss_gpio1, qdss_gpio10, qdss_gpio11, + qdss_gpio12, qdss_gpio13, qdss_gpio14, qdss_gpio15, + qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5, qdss_gpio6, + qdss_gpio7, qdss_gpio8, qdss_gpio9, qlink0_enable, + qlink0_request, qlink0_wmss, qlink1_enable, qlink1_request, + qlink1_wmss, qup00, qup01, qup02, qup10, qup11_f1, qup11_f2, + qup12, qup13_f1, qup13_f2, qup14, sd_write, sdc1_tb, sdc2_tb, + sp_cmu, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm1, + tsense_pwm2, uim1_clk, uim1_data, uim1_present, uim1_reset, + uim2_clk, uim2_data, uim2_present, uim2_reset, usb2phy_ac, + usb_phy, vfr_1, vsense_trigger, wlan1_adc0, wlan1_adc1, + wlan2_adc0, wlan2_adc1 ] + + required: + - pins + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + pinctrl@500000 { + compatible = "qcom,sm6375-tlmm"; + reg = <0x00500000 0x800000>; + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 157>; /* GPIOs + ufs_reset */ + + gpio-wo-subnode-state { + pins = "gpio1"; + function = "gpio"; + }; + + uart-w-subnodes-state { + rx-pins { + pins = "gpio18"; + function = "qup13_f2"; + bias-pull-up; + }; + + tx-pins { + pins = "gpio19"; + function = "qup13_f2"; + bias-disable; + }; + }; + }; +... diff --git a/dts/Bindings/pinctrl/qcom,sm7150-tlmm.yaml b/dts/Bindings/pinctrl/qcom,sm7150-tlmm.yaml new file mode 100644 index 0000000000..7f23f939ad --- /dev/null +++ b/dts/Bindings/pinctrl/qcom,sm7150-tlmm.yaml @@ -0,0 +1,146 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sm7150-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM7150 TLMM pin controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Danila Tikhonov <danila@jiaxyga.com> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm SM7150 SoC. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,sm7150-tlmm + + reg: + maxItems: 3 + + reg-names: + items: + - const: west + - const: north + - const: south + + interrupts: + maxItems: 1 + + gpio-reserved-ranges: + minItems: 1 + maxItems: 60 + + gpio-line-names: + maxItems: 119 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sm7150-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sm7150-tlmm-state" + additionalProperties: false + +$defs: + qcom-sm7150-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9]|11[0-8])$" + - enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, + sdc2_cmd, sdc2_data, ufs_reset ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ gpio, adsp_ext, agera_pll, aoss_cti, atest_char, atest_tsens, + atest_tsens2, atest_usb1, atest_usb2, cam_mclk, cci_async, + cci_i2c, cci_timer0, cci_timer1, cci_timer2, cci_timer3, + cci_timer4, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, ddr_pxi2, + ddr_pxi3, edp_hot, edp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, gp_pdm0, + gp_pdm1, gp_pdm2, gps_tx, jitter_bist, ldo_en, ldo_update, + m_voc, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2, + mdp_vsync3, mss_lte, nav_pps_in, nav_pps_out, pa_indicator, + pci_e, phase_flag, pll_bist, pll_bypassnl, pll_reset, pri_mi2s, + pri_mi2s_ws, prng_rosc, qdss, qdss_cti, qlink_enable, + qlink_request, qua_mi2s, qup00, qup01, qup02, qup03, qup04, + qup10, qup11, qup12, qup13, qup14, qup15, sd_write, sdc40, + sdc41, sdc42, sdc43, sdc4_clk, sdc4_cmd, sec_mi2s, ter_mi2s, + tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsif1_clk, tsif1_data, + tsif1_en, tsif1_error, tsif1_sync, tsif2_clk, tsif2_data, + tsif2_en, tsif2_error, tsif2_sync, uim1_clk, uim1_data, + uim1_present, uim1_reset, uim2_clk, uim2_data, uim2_present, + uim2_reset, uim_batt, usb_phy, vfr_1, vsense_trigger, + wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1, wsa_clk, + wsa_data ] + + required: + - pins + +required: + - compatible + - reg + - reg-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + tlmm: pinctrl@3500000 { + compatible = "qcom,sm7150-tlmm"; + reg = <0x03500000 0x300000>, + <0x03900000 0x300000>, + <0x03d00000 0x300000>; + reg-names = "west", "north", "south"; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-ranges = <&tlmm 0 0 120>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + wakeup-parent = <&pdc>; + + gpio-wo-state { + pins = "gpio1"; + function = "gpio"; + }; + + uart-w-state { + rx-pins { + pins = "gpio44"; + function = "qup12"; + bias-pull-up; + }; + + tx-pins { + pins = "gpio45"; + function = "qup12"; + bias-disable; + }; + }; + }; +... diff --git a/dts/Bindings/pinctrl/qcom,sm8150-pinctrl.txt b/dts/Bindings/pinctrl/qcom,sm8150-pinctrl.txt deleted file mode 100644 index fa37733e51..0000000000 --- a/dts/Bindings/pinctrl/qcom,sm8150-pinctrl.txt +++ /dev/null @@ -1,190 +0,0 @@ -Qualcomm SM8150 TLMM block - -This binding describes the Top Level Mode Multiplexer block found in the -QCS404 platform. - -- compatible: - Usage: required - Value type: <string> - Definition: must be "qcom,sm8150-pinctrl" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: the base address and size of the north, south, west - and east TLMM tiles. - -- reg-names: - Usage: required - Value type: <prop-encoded-array> - Defintiion: names for the cells of reg, must contain "north", "south" - "west" and "east". - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify the TLMM summary IRQ. - -- interrupt-controller: - Usage: required - Value type: <none> - Definition: identifies this node as an interrupt controller - -- #interrupt-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/interrupt-controller/irq.h> - -- gpio-controller: - Usage: required - Value type: <none> - Definition: identifies this node as a gpio controller - -- #gpio-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/gpio/gpio.h> - -- gpio-ranges: - Usage: required - Value type: <prop-encoded-array> - Definition: see ../gpio/gpio.txt - -- gpio-reserved-ranges: - Usage: optional - Value type: <prop-encoded-array> - Definition: see ../gpio/gpio.txt - -Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for -a general description of GPIO and interrupt bindings. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -The pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, drive strength, etc. - - -PIN CONFIGURATION NODES: - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pin configuration subnode: - -- pins: - Usage: required - Value type: <string-array> - Definition: List of gpio pins affected by the properties specified in - this subnode. - - Valid pins are: - gpio0-gpio149 - Supports mux, bias and drive-strength - - sdc1_clk, sdc1_cmd, sdc1_data sdc2_clk, sdc2_cmd, - sdc2_data sdc1_rclk - Supports bias and drive-strength - - ufs_reset - Supports bias and drive-strength - -- function: - Usage: required - Value type: <string> - Definition: Specify the alternative function to be configured for the - specified pins. Functions are only valid for gpio pins. - Valid values are: - - adsp_ext, agera_pll, aoss_cti, ddr_pxi2, atest_char, - atest_char0, atest_char1, atest_char2, atest_char3, - audio_ref, atest_usb1, atest_usb2, atest_usb10, - atest_usb11, atest_usb12, atest_usb13, atest_usb20, - atest_usb21, atest_usb22, atest_usb2, atest_usb23, - btfm_slimbus, cam_mclk, cci_async, cci_i2c, cci_timer0, - cci_timer1, cci_timer2, cci_timer3, cci_timer4, - cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, - ddr_pxi0, ddr_pxi1, ddr_pxi3, edp_hot, edp_lcd, - emac_phy, emac_pps, gcc_gp1, gcc_gp2, gcc_gp3, gpio, - hs1_mi2s, hs2_mi2s, hs3_mi2s, jitter_bist, - lpass_slimbus, mdp_vsync, mdp_vsync0, mdp_vsync1, - mdp_vsync2, mdp_vsync3, mss_lte, m_voc, nav_pps, - pa_indicator, pci_e0, phase_flag, pll_bypassnl, - pll_bist, pci_e1, pll_reset, pri_mi2s, pri_mi2s_ws, - prng_rosc, qdss, qdss_cti, qlink_request, qlink_enable, - qspi0, qspi1, qspi2, qspi3, qspi_clk, qspi_cs, qua_mi2s, - qup0, qup1, qup2, qup3, qup4, qup5, qup6, qup7, qup8, - qup9, qup10, qup11, qup12, qup13, qup14, qup15, qup16, - qup17, qup18, qup19, qup_l4, qup_l5, qup_l6, rgmii, - sdc4, sd_write, sec_mi2s, spkr_i2s, sp_cmu, ter_mi2s, - tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm1, - tsense_pwm2, tsif1, tsif2, uim1, uim2, uim_batt, - usb2phy_ac, usb_phy, vfr_1, vsense_trigger, wlan1_adc0, - wlan1_adc1, wlan2_adc0, wlan2_adc1, wmss_reset - -- bias-disable: - Usage: optional - Value type: <none> - Definition: The specified pins should be configued as no pull. - -- bias-pull-down: - Usage: optional - Value type: <none> - Definition: The specified pins should be configued as pull down. - -- bias-pull-up: - Usage: optional - Value type: <none> - Definition: The specified pins should be configued as pull up. - -- output-high: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - high. - Not valid for sdc pins. - -- output-low: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - low. - Not valid for sdc pins. - -- drive-strength: - Usage: optional - Value type: <u32> - Definition: Selects the drive strength for the specified pins, in mA. - Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 - -Example: - - tlmm: pinctrl@3000000 { - compatible = "qcom,sm8150-pinctrl"; - reg = <0x03100000 0x300000>, - <0x03500000 0x300000>, - <0x03900000 0x300000>, - <0x03D00000 0x300000>; - reg-names = "west", "east", "north", "south"; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&tlmm 0 0 175>; - gpio-reserved-ranges = <0 4>, <126 4>; - interrupt-controller; - #interrupt-cells = <2>; - }; diff --git a/dts/Bindings/pinctrl/qcom,sm8150-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sm8150-pinctrl.yaml new file mode 100644 index 0000000000..bdb7ed4be0 --- /dev/null +++ b/dts/Bindings/pinctrl/qcom,sm8150-pinctrl.yaml @@ -0,0 +1,159 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sm8150-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8150 TLMM pin controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm SM8150 SoC. + +properties: + compatible: + const: qcom,sm8150-pinctrl + + reg: + maxItems: 4 + + reg-names: + items: + - const: west + - const: east + - const: north + - const: south + + interrupts: + maxItems: 1 + + gpio-reserved-ranges: + minItems: 1 + maxItems: 88 + + gpio-line-names: + maxItems: 175 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sm8150-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sm8150-tlmm-state" + additionalProperties: false + +$defs: + qcom-sm8150-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-6][0-9]|17[0-4])$" + - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ adsp_ext, agera_pll, aoss_cti, ddr_pxi2, atest_char, + atest_char0, atest_char1, atest_char2, atest_char3, audio_ref, + atest_usb1, atest_usb2, atest_usb10, atest_usb11, atest_usb12, + atest_usb13, atest_usb20, atest_usb21, atest_usb22, + atest_usb23, btfm_slimbus, cam_mclk, cci_async, cci_i2c, + cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, + cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, + ddr_pxi1, ddr_pxi3, edp_hot, edp_lcd, emac_phy, emac_pps, + gcc_gp1, gcc_gp2, gcc_gp3, gpio, hs1_mi2s, hs2_mi2s, hs3_mi2s, + jitter_bist, lpass_slimbus, mdp_vsync, mdp_vsync0, mdp_vsync1, + mdp_vsync2, mdp_vsync3, mss_lte, m_voc, nav_pps, pa_indicator, + pci_e0, phase_flag, pll_bypassnl, pll_bist, pci_e1, pll_reset, + pri_mi2s, pri_mi2s_ws, prng_rosc, qdss, qdss_cti, + qlink_request, qlink_enable, qspi0, qspi1, qspi2, qspi3, + qspi_clk, qspi_cs, qua_mi2s, qup0, qup1, qup2, qup3, qup4, + qup5, qup6, qup7, qup8, qup9, qup10, qup11, qup12, qup13, + qup14, qup15, qup16, qup17, qup18, qup19, qup_l4, qup_l5, + qup_l6, rgmii, sdc4, sd_write, sec_mi2s, spkr_i2s, sp_cmu, + ter_mi2s, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm1, + tsense_pwm2, tsif1, tsif2, uim1, uim2, uim_batt, usb2phy_ac, + usb_phy, vfr_1, vsense_trigger, wlan1_adc0, wlan1_adc1, + wlan2_adc0, wlan2_adc1, wmss_reset ] + + required: + - pins + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +required: + - compatible + - reg + - reg-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + tlmm: pinctrl@3100000 { + compatible = "qcom,sm8150-pinctrl"; + reg = <0x03100000 0x300000>, + <0x03500000 0x300000>, + <0x03900000 0x300000>, + <0x03d00000 0x300000>; + reg-names = "west", "east", "north", "south"; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-ranges = <&tlmm 0 0 176>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + wakeup-parent = <&pdc>; + + qup-spi0-default-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "qup0"; + drive-strength = <6>; + bias-disable; + }; + + pcie1-default-state { + perst-pins { + pins = "gpio102"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq-pins { + pins = "gpio103"; + function = "pci_e1"; + drive-strength = <2>; + bias-pull-up; + }; + + wake-pins { + pins = "gpio104"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + }; diff --git a/dts/Bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml index e47ebf934d..750c996c10 100644 --- a/dts/Bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml +++ b/dts/Bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml @@ -1,25 +1,23 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/pinctrl/qcom,lpass-lpi-pinctrl.yaml# +$id: http://devicetree.org/schemas/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm Technologies, Inc. Low Power Audio SubSystem (LPASS) - Low Power Island (LPI) TLMM block +title: Qualcomm SM8250 SoC LPASS LPI TLMM maintainers: - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> -description: | - This binding describes the Top Level Mode Multiplexer block found in the - LPASS LPI IP on most Qualcomm SoCs +description: + Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem + (LPASS) Low Power Island (LPI) of Qualcomm SM8250 SoC. properties: compatible: const: qcom,sm8250-lpass-lpi-pinctrl reg: - minItems: 2 maxItems: 2 clocks: @@ -32,24 +30,23 @@ properties: - const: core - const: audio - gpio-controller: true - - '#gpio-cells': - description: Specifying the pin number and flags, as defined in - include/dt-bindings/gpio/gpio.h - const: 2 - - gpio-ranges: - maxItems: 1 - -#PIN CONFIGURATION NODES patternProperties: - '-pins$': + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sm8250-lpass-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sm8250-lpass-state" + additionalProperties: false + +$defs: + qcom-sm8250-lpass-state: type: object description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. - $ref: "/schemas/pinctrl/pincfg-node.yaml" + $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -58,7 +55,7 @@ patternProperties: subnode. items: oneOf: - - pattern: "^gpio([0-9]|[1-9][0-9])$" + - pattern: "^gpio([0-9]|1[0-3])$" minItems: 1 maxItems: 14 @@ -72,47 +69,16 @@ patternProperties: Specify the alternative function to be configured for the specified pins. - drive-strength: - enum: [2, 4, 6, 8, 10, 12, 14, 16] - default: 2 - description: - Selects the drive strength for the specified pins, in mA. - - slew-rate: - enum: [0, 1, 2, 3] - default: 0 - description: | - 0: No adjustments - 1: Higher Slew rate (faster edges) - 2: Lower Slew rate (slower edges) - 3: Reserved (No adjustments) - - bias-pull-down: true - - bias-pull-up: true - - bias-disable: true - - output-high: true - - output-low: true - - required: - - pins - - function - - additionalProperties: false +allOf: + - $ref: qcom,lpass-lpi-common.yaml# required: - compatible - reg - clocks - clock-names - - gpio-controller - - '#gpio-cells' - - gpio-ranges -additionalProperties: false +unevaluatedProperties: false examples: - | @@ -127,4 +93,28 @@ examples: gpio-controller; #gpio-cells = <2>; gpio-ranges = <&lpi_tlmm 0 0 14>; + + wsa-swr-active-state { + clk-pins { + pins = "gpio10"; + function = "wsa_swr_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio11"; + function = "wsa_swr_data"; + drive-strength = <2>; + slew-rate = <1>; + }; + }; + + tx-swr-sleep-clk-state { + pins = "gpio0"; + function = "swr_tx_clk"; + drive-strength = <2>; + bias-pull-down; + }; }; diff --git a/dts/Bindings/pinctrl/qcom,sm8250-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sm8250-pinctrl.yaml index 8508c57522..b5d04347c0 100644 --- a/dts/Bindings/pinctrl/qcom,sm8250-pinctrl.yaml +++ b/dts/Bindings/pinctrl/qcom,sm8250-pinctrl.yaml @@ -9,139 +9,112 @@ title: Qualcomm Technologies, Inc. SM8250 TLMM block maintainers: - Bjorn Andersson <bjorn.andersson@linaro.org> -description: | - This binding describes the Top Level Mode Multiplexer block found in the - SM8250 platform. +description: + Top Level Mode Multiplexer pin controller in the Qualcomm SM8250 SoC. properties: compatible: const: qcom,sm8250-pinctrl reg: - minItems: 3 maxItems: 3 reg-names: items: - - const: "west" - - const: "south" - - const: "north" + - const: west + - const: south + - const: north interrupts: - description: Specifies the TLMM summary IRQ maxItems: 1 - interrupt-controller: true + gpio-reserved-ranges: + minItems: 1 + maxItems: 90 - '#interrupt-cells': - description: - Specifies the PIN numbers and Flags, as defined in defined in - include/dt-bindings/interrupt-controller/irq.h - const: 2 - - gpio-controller: true - - '#gpio-cells': - description: Specifying the pin number and flags, as defined in - include/dt-bindings/gpio/gpio.h - const: 2 - - gpio-ranges: - maxItems: 1 - - wakeup-parent: - maxItems: 1 + gpio-line-names: + maxItems: 180 -#PIN CONFIGURATION NODES patternProperties: - '^.*$': - if: - type: object - then: - properties: - pins: - description: - List of gpio pins affected by the properties specified in this - subnode. - items: - oneOf: - - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9])$" - - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ] - minItems: 1 - maxItems: 36 - - function: - description: - Specify the alternative function to be configured for the specified - pins. - - enum: [ aoss_cti, atest, audio_ref, cam_mclk, cci_async, cci_i2c, - cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, cri_trng, - cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, - ddr_pxi2, ddr_pxi3, dp_hot, dp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, gpio, - ibi_i3c, jitter_bist, lpass_slimbus, mdp_vsync, mdp_vsync0, - mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s0_data0, mi2s0_data1, - mi2s0_sck, mi2s0_ws, mi2s1_data0, mi2s1_data1, mi2s1_sck, mi2s1_ws, - mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, pci_e0, pci_e1, - pci_e2, phase_flag, pll_bist, pll_bypassnl, pll_clk, pll_reset, - pri_mi2s, prng_rosc, qdss_cti, qdss_gpio, qspi0, qspi1, qspi2, qspi3, - qspi_clk, qspi_cs, qup0, qup1, qup10, qup11, qup12, qup13, qup14, - qup15, qup16, qup17, qup18, qup19, qup2, qup3, qup4, qup5, qup6, - qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, sd_write, sdc40, sdc41, - sdc42, sdc43, sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, tgu_ch0, tgu_ch1, - tgu_ch2, tgu_ch3, tsense_pwm1, tsense_pwm2, tsif0_clk, tsif0_data, - tsif0_en, tsif0_error, tsif0_sync, tsif1_clk, tsif1_data, tsif1_en, - tsif1_error, tsif1_sync, usb2phy_ac, usb_phy, vsense_trigger ] - - drive-strength: - enum: [2, 4, 6, 8, 10, 12, 14, 16] - default: 2 - description: - Selects the drive strength for the specified pins, in mA. - - bias-pull-down: true - - bias-pull-up: true - - bias-disable: true - - output-high: true - - output-low: true - - required: - - pins - - function - - additionalProperties: false + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sm8250-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sm8250-tlmm-state" + additionalProperties: false + +$defs: + qcom-sm8250-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9])$" + - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ aoss_cti, atest, audio_ref, cam_mclk, cci_async, cci_i2c, + cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, cri_trng, + cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, + ddr_pxi2, ddr_pxi3, dp_hot, dp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, gpio, + ibi_i3c, jitter_bist, lpass_slimbus, mdp_vsync, mdp_vsync0, + mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s0_data0, mi2s0_data1, + mi2s0_sck, mi2s0_ws, mi2s1_data0, mi2s1_data1, mi2s1_sck, mi2s1_ws, + mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, pci_e0, pci_e1, + pci_e2, phase_flag, pll_bist, pll_bypassnl, pll_clk, pll_reset, + pri_mi2s, prng_rosc, qdss_cti, qdss_gpio, qspi0, qspi1, qspi2, qspi3, + qspi_clk, qspi_cs, qup0, qup1, qup10, qup11, qup12, qup13, qup14, + qup15, qup16, qup17, qup18, qup19, qup2, qup3, qup4, qup5, qup6, + qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, sd_write, sdc40, sdc41, + sdc42, sdc43, sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, tgu_ch0, tgu_ch1, + tgu_ch2, tgu_ch3, tsense_pwm1, tsense_pwm2, tsif0_clk, tsif0_data, + tsif0_en, tsif0_error, tsif0_sync, tsif1_clk, tsif1_data, tsif1_en, + tsif1_error, tsif1_sync, usb2phy_ac, usb_phy, vsense_trigger ] + + required: + - pins + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# required: - compatible - reg - reg-names - - interrupts - - interrupt-controller - - '#interrupt-cells' - - gpio-controller - - '#gpio-cells' - - gpio-ranges -additionalProperties: false +unevaluatedProperties: false examples: - | - #include <dt-bindings/interrupt-controller/arm-gic.h> - pinctrl@1f00000 { - compatible = "qcom,sm8250-pinctrl"; - reg = <0x0f100000 0x300000>, - <0x0f500000 0x300000>, - <0x0f900000 0x300000>; - reg-names = "west", "south", "north"; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-ranges = <&tlmm 0 0 180>; - wakeup-parent = <&pdc>; - }; + #include <dt-bindings/interrupt-controller/arm-gic.h> + pinctrl@1f00000 { + compatible = "qcom,sm8250-pinctrl"; + reg = <0x0f100000 0x300000>, + <0x0f500000 0x300000>, + <0x0f900000 0x300000>; + reg-names = "west", "south", "north"; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 181>; /* GPIOs + ufs_reset */ + wakeup-parent = <&pdc>; + }; diff --git a/dts/Bindings/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml new file mode 100644 index 0000000000..9d782f910b --- /dev/null +++ b/dts/Bindings/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml @@ -0,0 +1,102 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8350 SoC LPASS LPI TLMM + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem + (LPASS) Low Power Island (LPI) of Qualcomm SM8350 SoC. + +properties: + compatible: + const: qcom,sm8350-lpass-lpi-pinctrl + + reg: + items: + - description: LPASS LPI TLMM Control and Status registers + - description: LPASS LPI MCC registers + + clocks: + items: + - description: LPASS Core voting clock + - description: LPASS Audio voting clock + + clock-names: + items: + - const: core + - const: audio + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sm8350-lpass-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sm8350-lpass-state" + additionalProperties: false + +$defs: + qcom-sm8350-lpass-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + pattern: "^gpio([0-9]|1[0-9]|2[0-2])$" + + function: + enum: [ dmic1_clk, dmic1_data, dmic2_clk, dmic2_data, dmic3_clk, + dmic3_data, dmic4_clk, dmic4_data, ext_mclk1_a, ext_mclk1_b, + ext_mclk1_c, ext_mclk1_d, ext_mclk1_e, gpio, i2s0_clk, + i2s0_data, i2s0_ws, i2s1_clk, i2s1_data, i2s1_ws, i2s2_clk, + i2s2_data, i2s2_ws, i2s3_clk, i2s3_data, i2s3_ws, i2s4_clk, + i2s4_data, i2s4_ws, slimbus_clk, slimbus_data, swr_rx_clk, + swr_rx_data, swr_tx_clk, swr_tx_data, wsa_swr_clk, + wsa_swr_data, wsa2_swr_clk, wsa2_swr_data ] + description: + Specify the alternative function to be configured for the specified + pins. + +allOf: + - $ref: qcom,lpass-lpi-common.yaml# + +required: + - compatible + - reg + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/sound/qcom,q6afe.h> + + lpass_tlmm: pinctrl@33c0000 { + compatible = "qcom,sm8350-lpass-lpi-pinctrl"; + reg = <0x033c0000 0x20000>, + <0x03550000 0x10000>; + + clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "core", "audio"; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 15>; + }; diff --git a/dts/Bindings/pinctrl/qcom,sm8350-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sm8350-tlmm.yaml index 4f2667ea28..ec5e09611d 100644 --- a/dts/Bindings/pinctrl/qcom,sm8350-pinctrl.yaml +++ b/dts/Bindings/pinctrl/qcom,sm8350-tlmm.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/pinctrl/qcom,sm8350-pinctrl.yaml# +$id: http://devicetree.org/schemas/pinctrl/qcom,sm8350-tlmm.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Technologies, Inc. SM8350 TLMM block @@ -9,9 +9,8 @@ title: Qualcomm Technologies, Inc. SM8350 TLMM block maintainers: - Vinod Koul <vkoul@kernel.org> -description: | - This binding describes the Top Level Mode Multiplexer (TLMM) block found - in the SM8350 platform. +description: + Top Level Mode Multiplexer pin controller in Qualcomm SM8350 SoC. allOf: - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# @@ -23,28 +22,24 @@ properties: reg: maxItems: 1 - interrupts: true - interrupt-controller: true - '#interrupt-cells': true - gpio-controller: true - gpio-reserved-ranges: true - '#gpio-cells': true - gpio-ranges: true - wakeup-parent: true + interrupts: + maxItems: 1 -required: - - compatible - - reg + gpio-reserved-ranges: + minItems: 1 + maxItems: 102 -additionalProperties: false + gpio-line-names: + maxItems: 203 patternProperties: - '-state$': + "-state$": oneOf: - $ref: "#/$defs/qcom-sm8350-tlmm-state" - patternProperties: - ".*": + "-pins$": $ref: "#/$defs/qcom-sm8350-tlmm-state" + additionalProperties: false $defs: qcom-sm8350-tlmm-state: @@ -52,7 +47,8 @@ $defs: description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state" + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -61,7 +57,7 @@ $defs: subnode. items: oneOf: - - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-3])$" + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-2])$" - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ] minItems: 1 maxItems: 36 @@ -95,51 +91,45 @@ $defs: uim0_present, uim0_reset, uim1_clk, uim1_data, uim1_present, uim1_reset, usb2phy_ac, usb_phy, vfr_0, vfr_1, vsense_trigger ] - - bias-disable: true - bias-pull-down: true - bias-pull-up: true - drive-strength: true - input-enable: true - output-high: true - output-low: true - required: - pins - - function - additionalProperties: false +required: + - compatible + - reg + +unevaluatedProperties: false examples: - | - #include <dt-bindings/interrupt-controller/arm-gic.h> - pinctrl@f100000 { - compatible = "qcom,sm8350-tlmm"; - reg = <0x0f100000 0x300000>; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-ranges = <&tlmm 0 0 203>; - - gpio-wo-subnode-state { - pins = "gpio1"; - function = "gpio"; - }; - - uart-w-subnodes-state { - rx { - pins = "gpio18"; - function = "qup3"; - bias-pull-up; - }; - - tx { - pins = "gpio19"; - function = "qup3"; - bias-disable; - }; - }; + #include <dt-bindings/interrupt-controller/arm-gic.h> + pinctrl@f100000 { + compatible = "qcom,sm8350-tlmm"; + reg = <0x0f100000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 204>; /* GPIOs + ufs_reset */ + + gpio-wo-subnode-state { + pins = "gpio1"; + function = "gpio"; + }; + + uart-w-subnodes-state { + rx-pins { + pins = "gpio18"; + function = "qup3"; + bias-pull-up; + }; + + tx-pins { + pins = "gpio19"; + function = "qup3"; + bias-disable; + }; }; + }; ... diff --git a/dts/Bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml new file mode 100644 index 0000000000..e7565592da --- /dev/null +++ b/dts/Bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml @@ -0,0 +1,123 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8450 SoC LPASS LPI TLMM + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem + (LPASS) Low Power Island (LPI) of Qualcomm SM8450 SoC. + +properties: + compatible: + const: qcom,sm8450-lpass-lpi-pinctrl + + reg: + items: + - description: LPASS LPI TLMM Control and Status registers + - description: LPASS LPI MCC registers + + clocks: + items: + - description: LPASS Core voting clock + - description: LPASS Audio voting clock + + clock-names: + items: + - const: core + - const: audio + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sm8450-lpass-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sm8450-lpass-state" + additionalProperties: false + +$defs: + qcom-sm8450-lpass-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + pattern: "^gpio([0-9]|1[0-9]|2[0-2])$" + + function: + enum: [ swr_tx_clk, swr_tx_data, swr_rx_clk, swr_rx_data, + dmic1_clk, dmic1_data, dmic2_clk, dmic2_data, dmic4_clk, + dmic4_data, i2s2_clk, i2s2_ws, dmic3_clk, dmic3_data, + qua_mi2s_sclk, qua_mi2s_ws, qua_mi2s_data, i2s1_clk, i2s1_ws, + i2s1_data, wsa_swr_clk, wsa_swr_data, wsa2_swr_clk, + wsa2_swr_data, i2s2_data, i2s4_ws, i2s4_clk, i2s4_data, + slimbus_clk, i2s3_clk, i2s3_ws, i2s3_data, slimbus_data, + ext_mclk1_c, ext_mclk1_b, ext_mclk1_a, ext_mclk1_d, + ext_mclk1_e ] + description: + Specify the alternative function to be configured for the specified + pins. + +allOf: + - $ref: qcom,lpass-lpi-common.yaml# + +required: + - compatible + - reg + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/sound/qcom,q6afe.h> + pinctrl@3440000 { + compatible = "qcom,sm8450-lpass-lpi-pinctrl"; + reg = <0x3440000 0x20000>, + <0x34d0000 0x10000>; + clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "core", "audio"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpi_tlmm 0 0 23>; + + wsa-swr-active-state { + clk-pins { + pins = "gpio10"; + function = "wsa_swr_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio11"; + function = "wsa_swr_data"; + drive-strength = <2>; + slew-rate = <1>; + }; + }; + + tx-swr-sleep-clk-state { + pins = "gpio0"; + function = "swr_tx_clk"; + drive-strength = <2>; + bias-pull-down; + }; + }; diff --git a/dts/Bindings/pinctrl/qcom,sm8450-tlmm.yaml b/dts/Bindings/pinctrl/qcom,sm8450-tlmm.yaml new file mode 100644 index 0000000000..16fd2c5e23 --- /dev/null +++ b/dts/Bindings/pinctrl/qcom,sm8450-tlmm.yaml @@ -0,0 +1,134 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sm8450-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. SM8450 TLMM block + +maintainers: + - Vinod Koul <vkoul@kernel.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm SM8450 SoC. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,sm8450-tlmm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-reserved-ranges: + minItems: 1 + maxItems: 105 + + gpio-line-names: + maxItems: 210 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sm8450-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sm8450-tlmm-state" + additionalProperties: false + +$defs: + qcom-sm8450-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-9])$" + - enum: [ ufs_reset, sdc2_clk, sdc2_cmd, sdc2_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + enum: [ aon_cam, atest_char, atest_usb, audio_ref, cam_mclk, cci_async, + cci_i2c, cci_timer, cmu_rng, coex_uart1, coex_uart2, cri_trng, + cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, + ddr_pxi2, ddr_pxi3, dp_hot, gcc_gp1, gcc_gp2, gcc_gp3, + gpio, ibi_i3c, jitter_bist, mdp_vsync, mdp_vsync0, mdp_vsync1, + mdp_vsync2, mdp_vsync3, mi2s0_data0, mi2s0_data1, mi2s0_sck, + mi2s0_ws, mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, + mss_grfc0, mss_grfc1, mss_grfc10, mss_grfc11, mss_grfc12, + mss_grfc2, mss_grfc3, mss_grfc4, mss_grfc5, mss_grfc6, + mss_grfc7, mss_grfc8, mss_grfc9, nav, pcie0_clkreqn, + pcie1_clkreqn, phase_flag, pll_bist, pll_clk, pri_mi2s, + prng_rosc, qdss_cti, qdss_gpio, qlink0_enable, qlink0_request, + qlink0_wmss, qlink1_enable, qlink1_request, qlink1_wmss, + qlink2_enable, qlink2_request, qlink2_wmss, qspi0, qspi1, + qspi2, qspi3, qspi_clk, qspi_cs, qup0, qup1, qup10, qup11, + qup12, qup13, qup14, qup15, qup16, qup17, qup18, qup19, qup2, + qup20, qup21, qup3, qup4, qup5, qup6, qup7, qup8, qup9, qup_l4, + qup_l5, qup_l6, sd_write, sdc40, sdc41, sdc42, sdc43, sdc4_clk, + sdc4_cmd, sec_mi2s, tb_trig, tgu_ch0, tgu_ch1, tgu_ch2, + tgu_ch3, tmess_prng0, tmess_prng1, tmess_prng2, tmess_prng3, + tsense_pwm1, tsense_pwm2, uim0_clk, uim0_data, uim0_present, + uim0_reset, uim1_clk, uim1_data, uim1_present, uim1_reset, + usb2phy_ac, usb_phy, vfr_0, vfr_1, vsense_trigger ] + + required: + - pins + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + pinctrl@f100000 { + compatible = "qcom,sm8450-tlmm"; + reg = <0x0f100000 0x300000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 211>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + + gpio-wo-state { + pins = "gpio1"; + function = "gpio"; + }; + + uart-w-state { + rx-pins { + pins = "gpio26"; + function = "qup7"; + bias-pull-up; + }; + + tx-pins { + pins = "gpio27"; + function = "qup7"; + bias-disable; + }; + }; + }; +... diff --git a/dts/Bindings/pinctrl/qcom,sm8550-lpass-lpi-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sm8550-lpass-lpi-pinctrl.yaml new file mode 100644 index 0000000000..bf4a72faca --- /dev/null +++ b/dts/Bindings/pinctrl/qcom,sm8550-lpass-lpi-pinctrl.yaml @@ -0,0 +1,113 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sm8550-lpass-lpi-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8550 SoC LPASS LPI TLMM + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem + (LPASS) Low Power Island (LPI) of Qualcomm SM8550 SoC. + +properties: + compatible: + oneOf: + - const: qcom,sm8550-lpass-lpi-pinctrl + - items: + - const: qcom,x1e80100-lpass-lpi-pinctrl + - const: qcom,sm8550-lpass-lpi-pinctrl + + reg: + items: + - description: LPASS LPI TLMM Control and Status registers + - description: LPASS LPI MCC registers + + clocks: + items: + - description: LPASS Core voting clock + - description: LPASS Audio voting clock + + clock-names: + items: + - const: core + - const: audio + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sm8550-lpass-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sm8550-lpass-state" + additionalProperties: false + +$defs: + qcom-sm8550-lpass-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + pattern: "^gpio([0-9]|1[0-9]|2[0-2])$" + + function: + enum: [ dmic1_clk, dmic1_data, dmic2_clk, dmic2_data, dmic3_clk, + dmic3_data, dmic4_clk, dmic4_data, ext_mclk1_a, ext_mclk1_b, + ext_mclk1_c, ext_mclk1_d, ext_mclk1_e, gpio, i2s0_clk, + i2s0_data, i2s0_ws, i2s1_clk, i2s1_data, i2s1_ws, i2s2_clk, + i2s2_data, i2s2_ws, i2s3_clk, i2s3_data, i2s3_ws, i2s4_clk, + i2s4_data, i2s4_ws, slimbus_clk, slimbus_data, swr_rx_clk, + swr_rx_data, swr_tx_clk, swr_tx_data, wsa_swr_clk, + wsa_swr_data, wsa2_swr_clk, wsa2_swr_data ] + description: + Specify the alternative function to be configured for the specified + pins. + +allOf: + - $ref: qcom,lpass-lpi-common.yaml# + +required: + - compatible + - reg + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h> + + lpass_tlmm: pinctrl@6e80000 { + compatible = "qcom,sm8550-lpass-lpi-pinctrl"; + reg = <0x06e80000 0x20000>, + <0x0725a000 0x10000>; + + clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "core", "audio"; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 23>; + + tx-swr-sleep-clk-state { + pins = "gpio0"; + function = "swr_tx_clk"; + drive-strength = <2>; + bias-pull-down; + }; + }; diff --git a/dts/Bindings/pinctrl/qcom,sm8550-tlmm.yaml b/dts/Bindings/pinctrl/qcom,sm8550-tlmm.yaml new file mode 100644 index 0000000000..c2ae79df42 --- /dev/null +++ b/dts/Bindings/pinctrl/qcom,sm8550-tlmm.yaml @@ -0,0 +1,148 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sm8550-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. SM8550 TLMM block + +maintainers: + - Abel Vesa <abel.vesa@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm SM8550 SoC. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,sm8550-tlmm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-reserved-ranges: + minItems: 1 + maxItems: 105 + + gpio-line-names: + maxItems: 210 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sm8550-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sm8550-tlmm-state" + additionalProperties: false + +$defs: + qcom-sm8550-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-9])$" + - enum: [ ufs_reset, sdc2_clk, sdc2_cmd, sdc2_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + enum: [ aon_cci, aoss_cti, atest_char, atest_usb, + audio_ext_mclk0, audio_ext_mclk1, audio_ref_clk, + cam_aon_mclk4, cam_mclk, cci_async_in, cci_i2c_scl, + cci_i2c_sda, cci_timer, cmu_rng, coex_uart1_rx, + coex_uart1_tx, coex_uart2_rx, coex_uart2_tx, + cri_trng, dbg_out_clk, ddr_bist_complete, + ddr_bist_fail, ddr_bist_start, ddr_bist_stop, + ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3, dp_hot, + gcc_gp1, gcc_gp2, gcc_gp3, gpio, i2chub0_se0, + i2chub0_se1, i2chub0_se2, i2chub0_se3, i2chub0_se4, + i2chub0_se5, i2chub0_se6, i2chub0_se7, i2chub0_se8, + i2chub0_se9, i2s0_data0, i2s0_data1, i2s0_sck, + i2s0_ws, i2s1_data0, i2s1_data1, i2s1_sck, i2s1_ws, + ibi_i3c, jitter_bist, mdp_vsync, mdp_vsync0_out, + mdp_vsync1_out, mdp_vsync2_out, mdp_vsync3_out, + mdp_vsync_e, nav_gpio0, nav_gpio1, nav_gpio2, + pcie0_clk_req_n, pcie1_clk_req_n, phase_flag, + pll_bist_sync, pll_clk_aux, prng_rosc0, prng_rosc1, + prng_rosc2, prng_rosc3, qdss_cti, qdss_gpio, + qlink0_enable, qlink0_request, qlink0_wmss, + qlink1_enable, qlink1_request, qlink1_wmss, + qlink2_enable, qlink2_request, qlink2_wmss, + qspi0, qspi1, qspi2, qspi3, qspi_clk, qspi_cs, + qup1_se0, qup1_se1, qup1_se2, qup1_se3, qup1_se4, + qup1_se5, qup1_se6, qup1_se7, qup2_se0, + qup2_se0_l0_mira, qup2_se0_l0_mirb, qup2_se0_l1_mira, + qup2_se0_l1_mirb, qup2_se0_l2_mira, qup2_se0_l2_mirb, + qup2_se0_l3_mira, qup2_se0_l3_mirb, qup2_se1, + qup2_se2, qup2_se3, qup2_se4, qup2_se5, qup2_se6, + qup2_se7, sd_write_protect, sdc40, sdc41, sdc42, + sdc43, sdc4_clk, sdc4_cmd, tb_trig_sdc2, tb_trig_sdc4, + tgu_ch0_trigout, tgu_ch1_trigout, tgu_ch2_trigout, + tgu_ch3_trigout, tmess_prng0, tmess_prng1, tmess_prng2, + tmess_prng3, tsense_pwm1, tsense_pwm2, tsense_pwm3, + uim0_clk, uim0_data, uim0_present, uim0_reset, + uim1_clk, uim1_data, uim1_present, uim1_reset, + usb1_hs, usb_phy, vfr_0, vfr_1, vsense_trigger_mirnat ] + + required: + - pins + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@f100000 { + compatible = "qcom,sm8550-tlmm"; + reg = <0x0f100000 0x300000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 211>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + + gpio-wo-state { + pins = "gpio1"; + function = "gpio"; + }; + + uart-w-state { + rx-pins { + pins = "gpio26"; + function = "qup2_se7"; + bias-pull-up; + }; + + tx-pins { + pins = "gpio27"; + function = "qup2_se7"; + bias-disable; + }; + }; + }; +... diff --git a/dts/Bindings/pinctrl/qcom,sm8650-lpass-lpi-pinctrl.yaml b/dts/Bindings/pinctrl/qcom,sm8650-lpass-lpi-pinctrl.yaml new file mode 100644 index 0000000000..db72143623 --- /dev/null +++ b/dts/Bindings/pinctrl/qcom,sm8650-lpass-lpi-pinctrl.yaml @@ -0,0 +1,107 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sm8650-lpass-lpi-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8650 SoC LPASS LPI TLMM + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem + (LPASS) Low Power Island (LPI) of Qualcomm SM8650 SoC. + +properties: + compatible: + const: qcom,sm8650-lpass-lpi-pinctrl + + reg: + items: + - description: LPASS LPI TLMM Control and Status registers + + clocks: + items: + - description: LPASS Core voting clock + - description: LPASS Audio voting clock + + clock-names: + items: + - const: core + - const: audio + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sm8650-lpass-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sm8650-lpass-state" + additionalProperties: false + +$defs: + qcom-sm8650-lpass-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + pattern: "^gpio([0-9]|1[0-9]|2[0-2])$" + + function: + enum: [ dmic1_clk, dmic1_data, dmic2_clk, dmic2_data, dmic3_clk, + dmic3_data, dmic4_clk, dmic4_data, ext_mclk1_a, ext_mclk1_b, + ext_mclk1_c, ext_mclk1_d, ext_mclk1_e, gpio, i2s0_clk, + i2s0_data, i2s0_ws, i2s1_clk, i2s1_data, i2s1_ws, i2s2_clk, + i2s2_data, i2s2_ws, i2s3_clk, i2s3_data, i2s3_ws, i2s4_clk, + i2s4_data, i2s4_ws, qca_swr_clk, qca_swr_data, slimbus_clk, + slimbus_data, swr_rx_clk, swr_rx_data, swr_tx_clk, swr_tx_data, + wsa_swr_clk, wsa_swr_data, wsa2_swr_clk, wsa2_swr_data ] + description: + Specify the alternative function to be configured for the specified + pins. + +allOf: + - $ref: qcom,lpass-lpi-common.yaml# + +required: + - compatible + - reg + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h> + + lpass_tlmm: pinctrl@6e80000 { + compatible = "qcom,sm8650-lpass-lpi-pinctrl"; + reg = <0x06e80000 0x20000>; + + clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "core", "audio"; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 23>; + + tx-swr-sleep-clk-state { + pins = "gpio0"; + function = "swr_tx_clk"; + drive-strength = <2>; + bias-pull-down; + }; + }; diff --git a/dts/Bindings/pinctrl/qcom,sm8650-tlmm.yaml b/dts/Bindings/pinctrl/qcom,sm8650-tlmm.yaml new file mode 100644 index 0000000000..c0a06abf85 --- /dev/null +++ b/dts/Bindings/pinctrl/qcom,sm8650-tlmm.yaml @@ -0,0 +1,141 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sm8650-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. SM8650 TLMM block + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm SM8650 SoC. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,sm8650-tlmm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-reserved-ranges: + minItems: 1 + maxItems: 105 + + gpio-line-names: + maxItems: 210 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sm8650-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sm8650-tlmm-state" + additionalProperties: false + +$defs: + qcom-sm8650-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-9])$" + - enum: [ ufs_reset, sdc2_clk, sdc2_cmd, sdc2_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + enum: [ gpio, aoss_cti, atest_char, atest_usb, audio_ext_mclk0, + audio_ext_mclk1, audio_ref_clk, cam_aon_mclk2, cam_aon_mclk4, + cam_mclk, cci_async_in, cci_i2c_scl, cci_i2c_sda, cci_timer, + cmu_rng, coex_uart1_rx, coex_uart1_tx, coex_uart2_rx, + coex_uart2_tx, cri_trng, dbg_out_clk, ddr_bist_complete, + ddr_bist_fail, ddr_bist_start, ddr_bist_stop, ddr_pxi0, + ddr_pxi1, ddr_pxi2, ddr_pxi3, do_not, dp_hot, gcc_gp1, + gcc_gp2, gcc_gp3, gnss_adc0, gnss_adc1, i2chub0_se0, + i2chub0_se1, i2chub0_se2, i2chub0_se3, i2chub0_se4, + i2chub0_se5, i2chub0_se6, i2chub0_se7, i2chub0_se8, + i2chub0_se9, i2s0_data0, i2s0_data1, i2s0_sck, i2s0_ws, + i2s1_data0, i2s1_data1, i2s1_sck, i2s1_ws, ibi_i3c, + jitter_bist, mdp_vsync, mdp_vsync0_out, mdp_vsync1_out, + mdp_vsync2_out, mdp_vsync3_out, mdp_vsync_e, nav_gpio0, + nav_gpio1, nav_gpio2, nav_gpio3, pcie0_clk_req_n, + pcie1_clk_req_n, phase_flag, pll_bist_sync, pll_clk_aux, + prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, qdss_cti, + qdss_gpio, qlink_big_enable, qlink_big_request, + qlink_little_enable, qlink_little_request, qlink_wmss, + qspi0, qspi1, qspi2, qspi3, qspi_clk, qspi_cs, qup1_se0, + qup1_se1, qup1_se2, qup1_se3, qup1_se4, qup1_se5, qup1_se6, + qup1_se7, qup2_se0, qup2_se1, qup2_se2, qup2_se3, qup2_se4, + qup2_se5, qup2_se6, qup2_se7, sd_write_protect, sdc40, sdc41, + sdc42, sdc43, sdc4_clk, sdc4_cmd, tb_trig_sdc2, tb_trig_sdc4, + tgu_ch0_trigout, tgu_ch1_trigout, tgu_ch2_trigout, + tgu_ch3_trigout, tmess_prng0, tmess_prng1, tmess_prng2, + tmess_prng3, tsense_pwm1, tsense_pwm2, tsense_pwm3, uim0_clk, + uim0_data, uim0_present, uim0_reset, uim1_clk, uim1_data, + uim1_present, uim1_reset, usb1_hs, usb_phy, vfr_0, vfr_1, + vsense_trigger_mirnat ] + + required: + - pins + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@f100000 { + compatible = "qcom,sm8650-tlmm"; + reg = <0x0f100000 0x300000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 211>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + + gpio-wo-state { + pins = "gpio1"; + function = "gpio"; + }; + + uart-w-state { + rx-pins { + pins = "gpio60"; + function = "qup1_se7"; + bias-pull-up; + }; + + tx-pins { + pins = "gpio61"; + function = "qup1_se7"; + bias-disable; + }; + }; + }; +... diff --git a/dts/Bindings/pinctrl/qcom,tlmm-common.yaml b/dts/Bindings/pinctrl/qcom,tlmm-common.yaml index 3b37cf102d..aae3dcf6ca 100644 --- a/dts/Bindings/pinctrl/qcom,tlmm-common.yaml +++ b/dts/Bindings/pinctrl/qcom,tlmm-common.yaml @@ -16,8 +16,9 @@ description: properties: interrupts: description: - Specifies the TLMM summary IRQ - maxItems: 1 + TLMM summary IRQ and dirconn interrupts. + minItems: 1 + maxItems: 9 interrupt-controller: true @@ -42,7 +43,6 @@ properties: description: Specifying the interrupt-controller used to wake up the system when the TLMM block has been powered down. - maxItems: 1 gpio-reserved-ranges: description: @@ -51,6 +51,9 @@ properties: should not be accessed by the OS. Please see the ../gpio/gpio.txt for more information. +allOf: + - $ref: pinctrl.yaml# + required: - interrupts - interrupt-controller @@ -63,23 +66,36 @@ additionalProperties: true $defs: qcom-tlmm-state: - allOf: - - $ref: pincfg-node.yaml# - - $ref: pinmux-node.yaml# - properties: drive-strength: enum: [2, 4, 6, 8, 10, 12, 14, 16] - default: 2 description: Selects the drive strength for the specified pins, in mA. bias-pull-down: true bias-pull-up: true bias-disable: true - input-enable: true + input-enable: false + output-disable: true + output-enable: true output-high: true output-low: true + allOf: + - $ref: pincfg-node.yaml# + - $ref: pinmux-node.yaml# + + - if: + properties: + pins: + items: + pattern: "^gpio" + then: + required: + - function + else: + properties: + function: false + additionalProperties: true ... diff --git a/dts/Bindings/pinctrl/qcom,x1e80100-tlmm.yaml b/dts/Bindings/pinctrl/qcom,x1e80100-tlmm.yaml new file mode 100644 index 0000000000..a1333e0743 --- /dev/null +++ b/dts/Bindings/pinctrl/qcom,x1e80100-tlmm.yaml @@ -0,0 +1,137 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,x1e80100-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. X1E80100 TLMM block + +maintainers: + - Rajendra Nayak <quic_rjendra@quicinc.com> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm X1E80100 SoC. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,x1e80100-tlmm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-reserved-ranges: + minItems: 1 + maxItems: 119 + + gpio-line-names: + maxItems: 238 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-x1e80100-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-x1e80100-tlmm-state" + additionalProperties: false + +$defs: + qcom-x1e80100-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-2][0-9]|23[0-7])$" + - enum: [ ufs_reset, sdc2_clk, sdc2_cmd, sdc2_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + enum: [ aon_cci, aoss_cti, atest_char, atest_char0, + atest_char1, atest_char2, atest_char3, atest_usb, + audio_ext, audio_ref, cam_aon, cam_mclk, cci_async, + cci_i2c, cci_timer0, cci_timer1, cci_timer2, cci_timer3, + cci_timer4, cmu_rng0, cmu_rng1, cmu_rng2, cmu_rng3, + cri_trng, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, + ddr_pxi2, ddr_pxi3, ddr_pxi4, ddr_pxi5, ddr_pxi6, ddr_pxi7, + edp0_hot, edp0_lcd, edp1_hot, edp1_lcd, eusb0_ac, eusb1_ac, + eusb2_ac, eusb3_ac, eusb5_ac, eusb6_ac, gcc_gp1, gcc_gp2, + gcc_gp3, gpio, i2s0_data0, i2s0_data1, i2s0_sck, i2s0_ws, i2s1_data0, + i2s1_data1, i2s1_sck, i2s1_ws, ibi_i3c, jitter_bist, mdp_vsync0, + mdp_vsync1, mdp_vsync2, mdp_vsync3, mdp_vsync4, mdp_vsync5, + mdp_vsync6, mdp_vsync7, mdp_vsync8, pcie3_clk, pcie4_clk, + pcie5_clk, pcie6a_clk, pcie6b_clk, phase_flag, pll_bist, pll_clk, + prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, qdss_cti, + qdss_gpio, qspi00, qspi01, qspi02, qspi03, qspi0_clk, qspi0_cs0, + qspi0_cs1, qup0_se0, qup0_se1, qup0_se2, qup0_se3, qup0_se4, + qup0_se5, qup0_se6, qup0_se7, qup1_se0, qup1_se1, qup1_se2, qup1_se3, + qup1_se4, qup1_se5, qup1_se6, qup1_se7, qup2_se0, qup2_se1, qup2_se2, + qup2_se3, qup2_se4, qup2_se5, qup2_se6, qup2_se7, sd_write, sdc4_clk, + sdc4_cmd, sdc4_data0, sdc4_data1, sdc4_data2, sdc4_data3, sys_throttle, + tb_trig, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tgu_ch4, tgu_ch5, + tgu_ch6, tgu_ch7, tmess_prng0, tmess_prng1, tmess_prng2, tmess_prng3, + tsense_pwm1, tsense_pwm2, sense_pwm3, tsense_pwm4, usb0_dp, usb0_phy, + usb0_sbrx, usb0_sbtx, usb1_dp, usb1_phy, usb1_sbrx, usb1_sbtx, + usb2_dp, usb2_phy, usb2_sbrx, usb2_sbtx, vsense_trigger ] + + required: + - pins + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@f100000 { + compatible = "qcom,x1e80100-tlmm"; + reg = <0x0f100000 0xf00000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 239>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + + gpio-wo-state { + pins = "gpio1"; + function = "gpio"; + }; + + uart-w-state { + rx-pins { + pins = "gpio26"; + function = "qup2_se7"; + bias-pull-up; + }; + + tx-pins { + pins = "gpio27"; + function = "qup2_se7"; + bias-disable; + }; + }; + }; +... diff --git a/dts/Bindings/pinctrl/ralink,rt2880-pinctrl.yaml b/dts/Bindings/pinctrl/ralink,rt2880-pinctrl.yaml new file mode 100644 index 0000000000..43b33dbf11 --- /dev/null +++ b/dts/Bindings/pinctrl/ralink,rt2880-pinctrl.yaml @@ -0,0 +1,141 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/ralink,rt2880-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ralink RT2880 Pin Controller + +maintainers: + - Arınç ÜNAL <arinc.unal@arinc9.com> + - Sergio Paracuellos <sergio.paracuellos@gmail.com> + +description: | + Ralink RT2880 pin controller for RT2880 SoC. + The pin controller can only set the muxing of pin groups. Muxing individual + pins is not supported. There is no pinconf support. + +properties: + compatible: + const: ralink,rt2880-pinctrl + +patternProperties: + '-pins$': + type: object + additionalProperties: false + + patternProperties: + '^(.*-)?pinmux$': + type: object + description: node for pinctrl. + $ref: pinmux-node.yaml# + additionalProperties: false + + properties: + function: + description: + A string containing the name of the function to mux to the group. + enum: [gpio, i2c, spi, uartlite, jtag, mdio, sdram, pci] + + groups: + description: + An array of strings. Each string contains the name of a group. + maxItems: 1 + + required: + - groups + - function + + allOf: + - if: + properties: + function: + const: gpio + then: + properties: + groups: + enum: [i2c, spi, uartlite, jtag, mdio, sdram, pci] + + - if: + properties: + function: + const: i2c + then: + properties: + groups: + enum: [i2c] + + - if: + properties: + function: + const: spi + then: + properties: + groups: + enum: [spi] + + - if: + properties: + function: + const: uartlite + then: + properties: + groups: + enum: [uartlite] + + - if: + properties: + function: + const: jtag + then: + properties: + groups: + enum: [jtag] + + - if: + properties: + function: + const: mdio + then: + properties: + groups: + enum: [mdio] + + - if: + properties: + function: + const: sdram + then: + properties: + groups: + enum: [sdram] + + - if: + properties: + function: + const: pci + then: + properties: + groups: + enum: [pci] + +allOf: + - $ref: pinctrl.yaml# + +required: + - compatible + +additionalProperties: false + +examples: + - | + pinctrl { + compatible = "ralink,rt2880-pinctrl"; + + i2c_pins: i2c0-pins { + pinmux { + groups = "i2c"; + function = "i2c"; + }; + }; + }; diff --git a/dts/Bindings/pinctrl/ralink,rt2880-pinmux.yaml b/dts/Bindings/pinctrl/ralink,rt2880-pinmux.yaml deleted file mode 100644 index b32f2676ca..0000000000 --- a/dts/Bindings/pinctrl/ralink,rt2880-pinmux.yaml +++ /dev/null @@ -1,64 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/pinctrl/ralink,rt2880-pinmux.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Ralink rt2880 pinmux controller - -maintainers: - - Sergio Paracuellos <sergio.paracuellos@gmail.com> - -description: - The rt2880 pinmux can only set the muxing of pin groups. muxing indiviual pins - is not supported. There is no pinconf support. - -properties: - compatible: - const: ralink,rt2880-pinmux - -patternProperties: - '-pins$': - type: object - patternProperties: - '^(.*-)?pinmux$': - type: object - description: node for pinctrl. - $ref: pinmux-node.yaml# - - properties: - groups: - description: Name of the pin group to use for the functions. - enum: [i2c, spi, uart1, uart2, uart3, rgmii1, rgmii2, mdio, - pcie, sdhci] - function: - description: The mux function to select - enum: [gpio, i2c, spi, uart1, uart2, uart3, rgmii1, rgmii2, - mdio, nand1, nand2, sdhci] - - required: - - groups - - function - - additionalProperties: false - - additionalProperties: false - -required: - - compatible - -additionalProperties: false - -examples: - # Pinmux controller node - - | - pinctrl { - compatible = "ralink,rt2880-pinmux"; - - i2c_pins: i2c0-pins { - pinmux { - groups = "i2c"; - function = "i2c"; - }; - }; - }; diff --git a/dts/Bindings/pinctrl/ralink,rt305x-pinctrl.yaml b/dts/Bindings/pinctrl/ralink,rt305x-pinctrl.yaml new file mode 100644 index 0000000000..95a9042730 --- /dev/null +++ b/dts/Bindings/pinctrl/ralink,rt305x-pinctrl.yaml @@ -0,0 +1,206 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/ralink,rt305x-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ralink RT305X Pin Controller + +maintainers: + - Arınç ÜNAL <arinc.unal@arinc9.com> + - Sergio Paracuellos <sergio.paracuellos@gmail.com> + +description: | + Ralink RT305X pin controller for RT3050, RT3052, and RT3350 SoCs. + The pin controller can only set the muxing of pin groups. Muxing individual + pins is not supported. There is no pinconf support. + +properties: + compatible: + const: ralink,rt305x-pinctrl + +patternProperties: + '-pins$': + type: object + additionalProperties: false + + patternProperties: + '^(.*-)?pinmux$': + type: object + description: node for pinctrl. + $ref: pinmux-node.yaml# + additionalProperties: false + + properties: + function: + description: + A string containing the name of the function to mux to the group. + enum: [gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, mdio, + pcm gpio, pcm i2s, pcm uartf, rgmii, sdram, spi, uartf, + uartlite] + + groups: + description: + An array of strings. Each string contains the name of a group. + maxItems: 1 + + required: + - groups + - function + + allOf: + - if: + properties: + function: + const: gpio + then: + properties: + groups: + enum: [i2c, jtag, mdio, rgmii, sdram, spi, uartf, uartlite] + + - if: + properties: + function: + const: gpio i2s + then: + properties: + groups: + enum: [uartf] + + - if: + properties: + function: + const: gpio uartf + then: + properties: + groups: + enum: [uartf] + + - if: + properties: + function: + const: i2c + then: + properties: + groups: + enum: [i2c] + + - if: + properties: + function: + const: i2s uartf + then: + properties: + groups: + enum: [uartf] + + - if: + properties: + function: + const: jtag + then: + properties: + groups: + enum: [jtag] + + - if: + properties: + function: + const: mdio + then: + properties: + groups: + enum: [mdio] + + - if: + properties: + function: + const: pcm gpio + then: + properties: + groups: + enum: [uartf] + + - if: + properties: + function: + const: pcm i2s + then: + properties: + groups: + enum: [uartf] + + - if: + properties: + function: + const: pcm uartf + then: + properties: + groups: + enum: [uartf] + + - if: + properties: + function: + const: rgmii + then: + properties: + groups: + enum: [rgmii] + + - if: + properties: + function: + const: sdram + then: + properties: + groups: + enum: [sdram] + + - if: + properties: + function: + const: spi + then: + properties: + groups: + enum: [spi] + + - if: + properties: + function: + const: uartf + then: + properties: + groups: + enum: [uartf] + + - if: + properties: + function: + const: uartlite + then: + properties: + groups: + enum: [uartlite] + +allOf: + - $ref: pinctrl.yaml# + +required: + - compatible + +additionalProperties: false + +examples: + - | + pinctrl { + compatible = "ralink,rt305x-pinctrl"; + + i2c_pins: i2c0-pins { + pinmux { + groups = "i2c"; + function = "i2c"; + }; + }; + }; diff --git a/dts/Bindings/pinctrl/ralink,rt3352-pinctrl.yaml b/dts/Bindings/pinctrl/ralink,rt3352-pinctrl.yaml new file mode 100644 index 0000000000..c9bc6cfd83 --- /dev/null +++ b/dts/Bindings/pinctrl/ralink,rt3352-pinctrl.yaml @@ -0,0 +1,243 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/ralink,rt3352-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ralink RT3352 Pin Controller + +maintainers: + - Arınç ÜNAL <arinc.unal@arinc9.com> + - Sergio Paracuellos <sergio.paracuellos@gmail.com> + +description: | + Ralink RT3352 pin controller for RT3352 SoC. + The pin controller can only set the muxing of pin groups. Muxing individual + pins is not supported. There is no pinconf support. + +properties: + compatible: + const: ralink,rt3352-pinctrl + +patternProperties: + '-pins$': + type: object + additionalProperties: false + + patternProperties: + '^(.*-)?pinmux$': + type: object + description: node for pinctrl. + $ref: pinmux-node.yaml# + additionalProperties: false + + properties: + function: + description: + A string containing the name of the function to mux to the group. + enum: [gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, led, lna, + mdio, pa, pcm gpio, pcm i2s, pcm uartf, rgmii, spi, spi_cs1, + uartf, uartlite, wdg_cs1] + + groups: + description: + An array of strings. Each string contains the name of a group. + maxItems: 1 + + required: + - groups + - function + + allOf: + - if: + properties: + function: + const: gpio + then: + properties: + groups: + enum: [i2c, jtag, led, lna, mdio, pa, rgmii, spi, spi_cs1, + uartf, uartlite] + + - if: + properties: + function: + const: gpio i2s + then: + properties: + groups: + enum: [uartf] + + - if: + properties: + function: + const: gpio uartf + then: + properties: + groups: + enum: [uartf] + + - if: + properties: + function: + const: i2c + then: + properties: + groups: + enum: [i2c] + + - if: + properties: + function: + const: i2s uartf + then: + properties: + groups: + enum: [uartf] + + - if: + properties: + function: + const: jtag + then: + properties: + groups: + enum: [jtag] + + - if: + properties: + function: + const: led + then: + properties: + groups: + enum: [led] + + - if: + properties: + function: + const: lna + then: + properties: + groups: + enum: [lna] + + - if: + properties: + function: + const: mdio + then: + properties: + groups: + enum: [mdio] + + - if: + properties: + function: + const: pa + then: + properties: + groups: + enum: [pa] + + - if: + properties: + function: + const: pcm gpio + then: + properties: + groups: + enum: [uartf] + + - if: + properties: + function: + const: pcm i2s + then: + properties: + groups: + enum: [uartf] + + - if: + properties: + function: + const: pcm uartf + then: + properties: + groups: + enum: [uartf] + + - if: + properties: + function: + const: rgmii + then: + properties: + groups: + enum: [rgmii] + + - if: + properties: + function: + const: spi + then: + properties: + groups: + enum: [spi] + + - if: + properties: + function: + const: spi_cs1 + then: + properties: + groups: + enum: [spi_cs1] + + - if: + properties: + function: + const: uartf + then: + properties: + groups: + enum: [uartf] + + - if: + properties: + function: + const: uartlite + then: + properties: + groups: + enum: [uartlite] + + - if: + properties: + function: + const: wdg_cs1 + then: + properties: + groups: + enum: [spi_cs1] + +allOf: + - $ref: pinctrl.yaml# + +required: + - compatible + +additionalProperties: false + +examples: + - | + pinctrl { + compatible = "ralink,rt3352-pinctrl"; + + i2c_pins: i2c0-pins { + pinmux { + groups = "i2c"; + function = "i2c"; + }; + }; + }; diff --git a/dts/Bindings/pinctrl/ralink,rt3883-pinctrl.yaml b/dts/Bindings/pinctrl/ralink,rt3883-pinctrl.yaml new file mode 100644 index 0000000000..8d14e525b2 --- /dev/null +++ b/dts/Bindings/pinctrl/ralink,rt3883-pinctrl.yaml @@ -0,0 +1,261 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/ralink,rt3883-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ralink RT3883 Pin Controller + +maintainers: + - Arınç ÜNAL <arinc.unal@arinc9.com> + - Sergio Paracuellos <sergio.paracuellos@gmail.com> + +description: | + Ralink RT3883 pin controller for RT3883 SoC. + The pin controller can only set the muxing of pin groups. Muxing individual + pins is not supported. There is no pinconf support. + +properties: + compatible: + const: ralink,rt3883-pinctrl + +patternProperties: + '-pins$': + type: object + additionalProperties: false + + patternProperties: + '^(.*-)?pinmux$': + type: object + description: node for pinctrl. + $ref: pinmux-node.yaml# + additionalProperties: false + + properties: + function: + description: + A string containing the name of the function to mux to the group. + enum: [ge1, ge2, gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, + lna a, lna g, mdio, pci-dev, pci-fnc, pci-host1, pci-host2, + pcm gpio, pcm i2s, pcm uartf, spi, uartf, uartlite] + + groups: + description: + An array of strings. Each string contains the name of a group. + maxItems: 1 + + required: + - groups + - function + + allOf: + - if: + properties: + function: + const: ge1 + then: + properties: + groups: + enum: [ge1] + + - if: + properties: + function: + const: ge2 + then: + properties: + groups: + enum: [ge2] + + - if: + properties: + function: + const: gpio + then: + properties: + groups: + enum: [ge1, ge2, i2c, jtag, lna a, lna g, mdio, pci, spi, + uartf, uartlite] + + - if: + properties: + function: + const: gpio i2s + then: + properties: + groups: + enum: [uartf] + + - if: + properties: + function: + const: gpio uartf + then: + properties: + groups: + enum: [uartf] + + - if: + properties: + function: + const: i2c + then: + properties: + groups: + enum: [i2c] + + - if: + properties: + function: + const: i2s uartf + then: + properties: + groups: + enum: [uartf] + + - if: + properties: + function: + const: jtag + then: + properties: + groups: + enum: [jtag] + + - if: + properties: + function: + const: lna a + then: + properties: + groups: + enum: [lna a] + + - if: + properties: + function: + const: lna g + then: + properties: + groups: + enum: [lna g] + + - if: + properties: + function: + const: mdio + then: + properties: + groups: + enum: [mdio] + + - if: + properties: + function: + const: pci-dev + then: + properties: + groups: + enum: [pci] + + - if: + properties: + function: + const: pci-fnc + then: + properties: + groups: + enum: [pci] + + - if: + properties: + function: + const: pci-host1 + then: + properties: + groups: + enum: [pci] + + - if: + properties: + function: + const: pci-host2 + then: + properties: + groups: + enum: [pci] + + - if: + properties: + function: + const: pcm gpio + then: + properties: + groups: + enum: [uartf] + + - if: + properties: + function: + const: pcm i2s + then: + properties: + groups: + enum: [uartf] + + - if: + properties: + function: + const: pcm uartf + then: + properties: + groups: + enum: [uartf] + + - if: + properties: + function: + const: spi + then: + properties: + groups: + enum: [spi] + + - if: + properties: + function: + const: uartf + then: + properties: + groups: + enum: [uartf] + + - if: + properties: + function: + const: uartlite + then: + properties: + groups: + enum: [uartlite] + +allOf: + - $ref: pinctrl.yaml# + +required: + - compatible + +additionalProperties: false + +examples: + - | + pinctrl { + compatible = "ralink,rt3883-pinctrl"; + + i2c_pins: i2c0-pins { + pinmux { + groups = "i2c"; + function = "i2c"; + }; + }; + }; diff --git a/dts/Bindings/pinctrl/ralink,rt5350-pinctrl.yaml b/dts/Bindings/pinctrl/ralink,rt5350-pinctrl.yaml new file mode 100644 index 0000000000..f248202ce8 --- /dev/null +++ b/dts/Bindings/pinctrl/ralink,rt5350-pinctrl.yaml @@ -0,0 +1,206 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/ralink,rt5350-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ralink RT5350 Pin Controller + +maintainers: + - Arınç ÜNAL <arinc.unal@arinc9.com> + - Sergio Paracuellos <sergio.paracuellos@gmail.com> + +description: | + Ralink RT5350 pin controller for RT5350 SoC. + The pin controller can only set the muxing of pin groups. Muxing individual + pins is not supported. There is no pinconf support. + +properties: + compatible: + const: ralink,rt5350-pinctrl + +patternProperties: + '-pins$': + type: object + additionalProperties: false + + patternProperties: + '^(.*-)?pinmux$': + type: object + description: node for pinctrl. + $ref: pinmux-node.yaml# + additionalProperties: false + + properties: + function: + description: + A string containing the name of the function to mux to the group. + enum: [gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, led, + pcm gpio, pcm i2s, pcm uartf, spi, spi_cs1, uartf, uartlite, + wdg_cs1] + + groups: + description: + An array of strings. Each string contains the name of a group. + maxItems: 1 + + required: + - groups + - function + + allOf: + - if: + properties: + function: + const: gpio + then: + properties: + groups: + enum: [i2c, jtag, led, spi, spi_cs1, uartf, uartlite] + + - if: + properties: + function: + const: gpio i2s + then: + properties: + groups: + enum: [uartf] + + - if: + properties: + function: + const: gpio uartf + then: + properties: + groups: + enum: [uartf] + + - if: + properties: + function: + const: i2c + then: + properties: + groups: + enum: [i2c] + + - if: + properties: + function: + const: i2s uartf + then: + properties: + groups: + enum: [uartf] + + - if: + properties: + function: + const: jtag + then: + properties: + groups: + enum: [jtag] + + - if: + properties: + function: + const: led + then: + properties: + groups: + enum: [led] + + - if: + properties: + function: + const: pcm gpio + then: + properties: + groups: + enum: [uartf] + + - if: + properties: + function: + const: pcm i2s + then: + properties: + groups: + enum: [uartf] + + - if: + properties: + function: + const: pcm uartf + then: + properties: + groups: + enum: [uartf] + + - if: + properties: + function: + const: spi + then: + properties: + groups: + enum: [spi] + + - if: + properties: + function: + const: spi_cs1 + then: + properties: + groups: + enum: [spi_cs1] + + - if: + properties: + function: + const: uartf + then: + properties: + groups: + enum: [uartf] + + - if: + properties: + function: + const: uartlite + then: + properties: + groups: + enum: [uartlite] + + - if: + properties: + function: + const: wdg_cs1 + then: + properties: + groups: + enum: [spi_cs1] + +allOf: + - $ref: pinctrl.yaml# + +required: + - compatible + +additionalProperties: false + +examples: + - | + pinctrl { + compatible = "ralink,rt5350-pinctrl"; + + i2c_pins: i2c0-pins { + pinmux { + groups = "i2c"; + function = "i2c"; + }; + }; + }; diff --git a/dts/Bindings/pinctrl/realtek,rtd1315e-pinctrl.yaml b/dts/Bindings/pinctrl/realtek,rtd1315e-pinctrl.yaml new file mode 100644 index 0000000000..fc6c65fea7 --- /dev/null +++ b/dts/Bindings/pinctrl/realtek,rtd1315e-pinctrl.yaml @@ -0,0 +1,188 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2023 Realtek Semiconductor Corporation +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/realtek,rtd1315e-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Realtek DHC RTD1315E Pin Controller + +maintainers: + - TY Chang <tychang@realtek.com> + +description: + The Realtek DHC RTD1315E is a high-definition media processor SoC. The + RTD1315E pin controller is used to control pin function, pull up/down + resistor, drive strength, schmitt trigger and power source. + +properties: + compatible: + const: realtek,rtd1315e-pinctrl + + reg: + maxItems: 1 + +patternProperties: + '-pins$': + type: object + allOf: + - $ref: pincfg-node.yaml# + - $ref: pinmux-node.yaml# + + properties: + pins: + items: + enum: [ gpio_0, gpio_1, emmc_rst_n, emmc_dd_sb, emmc_clk, emmc_cmd, + gpio_6, gpio_7, gpio_8, gpio_9, gpio_10, gpio_11, gpio_12, + gpio_13, gpio_14, gpio_15, gpio_16, gpio_17, gpio_18, gpio_19, + gpio_20, emmc_data_0, emmc_data_1, emmc_data_2, usb_cc2, gpio_25, + gpio_26, gpio_27, gpio_28, gpio_29, gpio_30, gpio_31, gpio_32, + gpio_33, gpio_34, gpio_35, hif_data, hif_en, hif_rdy, hif_clk, + gpio_dummy_40, gpio_dummy_41, gpio_dummy_42, gpio_dummy_43, + gpio_dummy_44, gpio_dummy_45, gpio_46, gpio_47, gpio_48, gpio_49, + gpio_50, usb_cc1, emmc_data_3, emmc_data_4, ir_rx, ur0_rx, ur0_tx, + gpio_57, gpio_58, gpio_59, gpio_60, gpio_61, gpio_62, gpio_dummy_63, + gpio_dummy_64, gpio_dummy_65, gpio_66, gpio_67, gpio_68, gpio_69, + gpio_70, gpio_71, gpio_72, gpio_dummy_73, emmc_data_5, emmc_data_6, + emmc_data_7, gpio_dummy_77, gpio_78, gpio_79, gpio_80, gpio_81, + ur2_loc, gspi_loc, hi_width, sf_en, arm_trace_dbg_en, + ejtag_aucpu_loc, ejtag_acpu_loc, ejtag_vcpu_loc, ejtag_scpu_loc, + dmic_loc, vtc_dmic_loc, vtc_tdm_loc, vtc_i2si_loc, tdm_ai_loc, + ai_loc, spdif_loc, hif_en_loc, scan_switch, wd_rset, boot_sel, + reset_n, testmode ] + + function: + enum: [ gpio, nf, emmc, ao, gspi_loc0, gspi_loc1, uart0, uart1, + uart2_loc0, uart2_loc1, i2c0, i2c1, i2c4, i2c5, pcie1, + etn_led, etn_phy, spi, pwm0_loc0, pwm0_loc1, pwm1_loc0, + pwm1_loc1, pwm2_loc0, pwm2_loc1, pwm3_loc0, pwm3_loc1, + spdif_optical_loc0, spdif_optical_loc1, usb_cc1, usb_cc2, + sd, dmic_loc0, dmic_loc1, ai_loc0, ai_loc1, tdm_ai_loc0, + tdm_ai_loc1, hi_loc0, hi_m, vtc_i2so, vtc_i2si_loc0, + vtc_i2si_loc1, vtc_dmic_loc0, vtc_dmic_loc1, vtc_tdm_loc0, + vtc_tdm_loc1, dc_fan, pll_test_loc0, pll_test_loc1, + ir_rx, uart2_disable, gspi_disable, hi_width_disable, + hi_width_1bit, sf_disable, sf_enable, scpu_ejtag_loc0, + scpu_ejtag_loc1, scpu_ejtag_loc2, scpu_ejtag_loc3, + acpu_ejtag_loc0, acpu_ejtag_loc1, acpu_ejtag_loc2, + vcpu_ejtag_loc0, vcpu_ejtag_loc1, vcpu_ejtag_loc2, + aucpu_ejtag_loc0, aucpu_ejtag_loc1, aucpu_ejtag_loc2, + gpu_ejtag, iso_tristate, dbg_out0, dbg_out1, standby_dbg, + spdif, arm_trace_debug_disable, arm_trace_debug_enable, + aucpu_ejtag_disable, acpu_ejtag_disable, vcpu_ejtag_disable, + scpu_ejtag_disable, vtc_dmic_loc_disable, vtc_tdm_disable, + vtc_i2si_disable, tdm_ai_disable, ai_disable, spdif_disable, + hif_disable, hif_enable, test_loop, pmic_pwrup ] + + drive-strength: + enum: [4, 8] + + bias-pull-down: true + + bias-pull-up: true + + bias-disable: true + + input-schmitt-enable: true + + input-schmitt-disable: true + + drive-push-pull: true + + power-source: + description: | + Valid arguments are described as below: + 0: power supply of 1.8V + 1: power supply of 3.3V + enum: [0, 1] + + realtek,drive-strength-p: + description: | + Some of pins can be driven using the P-MOS and N-MOS transistor to + achieve finer adjustments. The block-diagram representation is as + follows: + VDD + | + ||--+ + +-----o|| P-MOS-FET + | ||--+ + IN --+ +----- out + | ||--+ + +------|| N-MOS-FET + ||--+ + | + GND + The driving strength of the P-MOS/N-MOS transistors impacts the + waveform's rise/fall times. Greater driving strength results in + shorter rise/fall times. Each P-MOS and N-MOS transistor offers + 8 configurable levels (0 to 7), with higher values indicating + greater driving strength, contributing to achieving the desired + speed. + + The realtek,drive-strength-p is used to control the driving strength + of the P-MOS output. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 7 + + realtek,drive-strength-n: + description: | + Similar to the realtek,drive-strength-p, the realtek,drive-strength-n + is used to control the driving strength of the N-MOS output. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 7 + + realtek,duty-cycle: + description: | + An integer describing the level to adjust output duty cycle, controlling + the proportion of positive and negative waveforms in nanoseconds. + Valid arguments are described as below: + 0: 0ns + 2: + 0.25ns + 3: + 0.5ns + 4: -0.25ns + 5: -0.5ns + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 2, 3, 4, 5 ] + + required: + - pins + + additionalProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + pinctrl@4e000 { + compatible = "realtek,rtd1315e-pinctrl"; + reg = <0x4e000 0x130>; + + emmc-hs200-pins { + pins = "emmc_clk", + "emmc_cmd", + "emmc_data_0", + "emmc_data_1", + "emmc_data_2", + "emmc_data_3", + "emmc_data_4", + "emmc_data_5", + "emmc_data_6", + "emmc_data_7"; + function = "emmc"; + realtek,drive-strength-p = <0x2>; + realtek,drive-strength-n = <0x2>; + }; + + i2c-0-pins { + pins = "gpio_12", + "gpio_13"; + function = "i2c0"; + drive-strength = <4>; + }; + }; diff --git a/dts/Bindings/pinctrl/realtek,rtd1319d-pinctrl.yaml b/dts/Bindings/pinctrl/realtek,rtd1319d-pinctrl.yaml new file mode 100644 index 0000000000..f07361d60a --- /dev/null +++ b/dts/Bindings/pinctrl/realtek,rtd1319d-pinctrl.yaml @@ -0,0 +1,187 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2023 Realtek Semiconductor Corporation +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/realtek,rtd1319d-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Realtek DHC RTD1319D Pin Controller + +maintainers: + - TY Chang <tychang@realtek.com> + +description: + The Realtek DHC RTD1319D is a high-definition media processor SoC. The + RTD1319D pin controller is used to control pin function, pull up/down + resistor, drive strength, schmitt trigger and power source. + +properties: + compatible: + const: realtek,rtd1319d-pinctrl + + reg: + maxItems: 1 + +patternProperties: + '-pins$': + type: object + allOf: + - $ref: pincfg-node.yaml# + - $ref: pinmux-node.yaml# + + properties: + pins: + items: + enum: [ gpio_0, gpio_1, gpio_2, gpio_3, gpio_4, gpio_5, gpio_6, gpio_7, + gpio_8, gpio_9, gpio_10, gpio_11, gpio_12, gpio_13, gpio_14, + gpio_15, gpio_16, gpio_17, gpio_18, gpio_19, gpio_20, gpio_21, + gpio_22, gpio_23, usb_cc2, gpio_25, gpio_26, gpio_27, gpio_28, + gpio_29, gpio_30, gpio_31, gpio_32, gpio_33, gpio_34, gpio_35, + hif_data, hif_en, hif_rdy, hif_clk, gpio_40, gpio_41, gpio_42, + gpio_43, gpio_44, gpio_45, gpio_46, gpio_47, gpio_48, gpio_49, + gpio_50, usb_cc1, gpio_52, gpio_53, ir_rx, ur0_rx, ur0_tx, + gpio_57, gpio_58, gpio_59, gpio_60, gpio_61, gpio_62, gpio_63, + gpio_64, emmc_rst_n, emmc_dd_sb, emmc_clk, emmc_cmd, emmc_data_0, + emmc_data_1, emmc_data_2, emmc_data_3, emmc_data_4, emmc_data_5, + emmc_data_6, emmc_data_7, dummy, gpio_78, gpio_79, gpio_80, + gpio_81, ur2_loc, gspi_loc, hi_width, sf_en, arm_trace_dbg_en, + ejtag_aucpu_loc, ejtag_acpu_loc, ejtag_vcpu_loc, ejtag_scpu_loc, + dmic_loc, ejtag_secpu_loc, vtc_dmic_loc, vtc_tdm_loc, vtc_i2si_loc, + tdm_ai_loc, ai_loc, spdif_loc, hif_en_loc, sc0_loc, sc1_loc, + scan_switch, wd_rset, boot_sel, reset_n, testmode ] + + function: + enum: [ gpio, nf, emmc, tp0, tp1, sc0, sc0_data0, sc0_data1, sc0_data2, + sc1, sc1_data0, sc1_data1, sc1_data2, ao, gspi_loc0, gspi_loc1, + uart0, uart1, uart2_loc0, uart2_loc1, i2c0, i2c1, i2c3, i2c4, + i2c5, pcie1, sdio, etn_led, etn_phy, spi, pwm0_loc0, pwm0_loc1, + pwm1_loc0, pwm1_loc1, pwm2_loc0, pwm2_loc1, pwm3_loc0, pwm3_loc1, + qam_agc_if0, qam_agc_if1, spdif_optical_loc0, spdif_optical_loc1, + usb_cc1, usb_cc2, vfd, sd, dmic_loc0, dmic_loc1, ai_loc0, ai_loc1, + tdm_ai_loc0, tdm_ai_loc1, hi_loc0, hi_m, vtc_i2so, vtc_i2si_loc0, + vtc_i2si_loc1, vtc_dmic_loc0, vtc_dmic_loc1, vtc_tdm_loc0, + vtc_tdm_loc1, dc_fan, pll_test_loc0, pll_test_loc1, ir_rx, + uart2_disable, gspi_disable, hi_width_disable, hi_width_1bit, + sf_disable, sf_enable, scpu_ejtag_loc0, scpu_ejtag_loc1, + scpu_ejtag_loc2, acpu_ejtag_loc0, acpu_ejtag_loc1, acpu_ejtag_loc2, + vcpu_ejtag_loc0, vcpu_ejtag_loc1, vcpu_ejtag_loc2, secpu_ejtag_loc0, + secpu_ejtag_loc1, secpu_ejtag_loc2, aucpu_ejtag_loc0, aucpu_ejtag_loc1, + aucpu_ejtag_loc2, iso_tristate, dbg_out0, dbg_out1, standby_dbg, + spdif, arm_trace_debug_disable, arm_trace_debug_enable, + aucpu_ejtag_disable, acpu_ejtag_disable, vcpu_ejtag_disable, + scpu_ejtag_disable, secpu_ejtag_disable, vtc_dmic_loc_disable, + vtc_tdm_disable, vtc_i2si_disable, tdm_ai_disable, ai_disable, + spdif_disable, hif_disable, hif_enable, test_loop, pmic_pwrup ] + + drive-strength: + enum: [4, 8] + + bias-pull-down: true + + bias-pull-up: true + + bias-disable: true + + input-schmitt-enable: true + + input-schmitt-disable: true + + drive-push-pull: true + + power-source: + description: | + Valid arguments are described as below: + 0: power supply of 1.8V + 1: power supply of 3.3V + enum: [0, 1] + + realtek,drive-strength-p: + description: | + Some of pins can be driven using the P-MOS and N-MOS transistor to + achieve finer adjustments. The block-diagram representation is as + follows: + VDD + | + ||--+ + +-----o|| P-MOS-FET + | ||--+ + IN --+ +----- out + | ||--+ + +------|| N-MOS-FET + ||--+ + | + GND + The driving strength of the P-MOS/N-MOS transistors impacts the + waveform's rise/fall times. Greater driving strength results in + shorter rise/fall times. Each P-MOS and N-MOS transistor offers + 8 configurable levels (0 to 7), with higher values indicating + greater driving strength, contributing to achieving the desired + speed. + + The realtek,drive-strength-p is used to control the driving strength + of the P-MOS output. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 7 + + realtek,drive-strength-n: + description: | + Similar to the realtek,drive-strength-p, the realtek,drive-strength-n + is used to control the driving strength of the N-MOS output. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 7 + + realtek,duty-cycle: + description: | + An integer describing the level to adjust output duty cycle, controlling + the proportion of positive and negative waveforms in nanoseconds. + Valid arguments are described as below: + 0: 0ns + 2: + 0.25ns + 3: + 0.5ns + 4: -0.25ns + 5: -0.5ns + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 2, 3, 4, 5 ] + + required: + - pins + + additionalProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + pinctrl@4e000 { + compatible = "realtek,rtd1319d-pinctrl"; + reg = <0x4e000 0x130>; + + emmc-hs200-pins { + pins = "emmc_clk", + "emmc_cmd", + "emmc_data_0", + "emmc_data_1", + "emmc_data_2", + "emmc_data_3", + "emmc_data_4", + "emmc_data_5", + "emmc_data_6", + "emmc_data_7"; + function = "emmc"; + realtek,drive-strength-p = <0x2>; + realtek,drive-strength-n = <0x2>; + }; + + i2c-0-pins { + pins = "gpio_12", + "gpio_13"; + function = "i2c0"; + drive-strength = <4>; + }; + }; diff --git a/dts/Bindings/pinctrl/realtek,rtd1619b-pinctrl.yaml b/dts/Bindings/pinctrl/realtek,rtd1619b-pinctrl.yaml new file mode 100644 index 0000000000..671e4ec846 --- /dev/null +++ b/dts/Bindings/pinctrl/realtek,rtd1619b-pinctrl.yaml @@ -0,0 +1,186 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2023 Realtek Semiconductor Corporation +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/realtek,rtd1619b-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Realtek DHC RTD1619B Pin Controller + +maintainers: + - TY Chang <tychang@realtek.com> + +description: + The Realtek DHC RTD1619B is a high-definition media processor SoC. The + RTD1619B pin controller is used to control pin function, pull up/down + resistor, drive strength, schmitt trigger and power source. + +properties: + compatible: + const: realtek,rtd1619b-pinctrl + + reg: + maxItems: 1 + +patternProperties: + '-pins$': + type: object + allOf: + - $ref: pincfg-node.yaml# + - $ref: pinmux-node.yaml# + + properties: + pins: + items: + enum: [ gpio_0, gpio_1, gpio_2, gpio_3, gpio_4, gpio_5, gpio_6, gpio_7, + gpio_8, gpio_9, gpio_10, gpio_11, gpio_12, gpio_13, gpio_14, + gpio_15, gpio_16, gpio_17, gpio_18, gpio_19, gpio_20, gpio_21, + gpio_22, gpio_23, usb_cc2, gpio_25, gpio_26, gpio_27, gpio_28, + gpio_29, gpio_30, gpio_31, gpio_32, gpio_33, gpio_34, gpio_35, + hif_data, hif_en, hif_rdy, hif_clk, gpio_40, gpio_41, gpio_42, + gpio_43, gpio_44, gpio_45, gpio_46, gpio_47, gpio_48, gpio_49, + gpio_50, usb_cc1, gpio_52, gpio_53, ir_rx, ur0_rx, ur0_tx, + gpio_57, gpio_58, gpio_59, gpio_60, gpio_61, gpio_62, gpio_63, + gpio_64, gpio_65, gpio_66, gpio_67, gpio_68, gpio_69, gpio_70, + gpio_71, gpio_72, gpio_73, gpio_74, gpio_75, gpio_76, emmc_cmd, + spi_ce_n, spi_sck, spi_so, spi_si, emmc_rst_n, emmc_dd_sb, + emmc_clk, emmc_data_0, emmc_data_1, emmc_data_2, emmc_data_3, + emmc_data_4, emmc_data_5, emmc_data_6, emmc_data_7, ur2_loc, + gspi_loc, sdio_loc, hi_loc, hi_width, sf_en, arm_trace_dbg_en, + pwm_01_open_drain_en_loc0, pwm_23_open_drain_en_loc0, + pwm_01_open_drain_en_loc1, pwm_23_open_drain_en_loc1, + ejtag_acpu_loc, ejtag_vcpu_loc, ejtag_scpu_loc, dmic_loc, + iso_gspi_loc, ejtag_ve3_loc, ejtag_aucpu0_loc, ejtag_aucpu1_loc ] + + function: + enum: [ gpio, nf, nf_spi, spi, pmic, spdif, spdif_coaxial, spdif_optical_loc0, + spdif_optical_loc1, emmc_spi, emmc, sc1, uart0, uart1, uart2_loc0, uart2_loc1, + gspi_loc1, iso_gspi_loc1, i2c0, i2c1, i2c3, i2c4, i2c5, pwm0, pwm1, pwm2, + pwm3, etn_led, etn_phy, etn_clk, sc0, vfd, gspi_loc0, iso_gspi_loc0, pcie1, + pcie2, sd, sdio_loc0, sdio_loc1, hi, hi_m, dc_fan, pll_test_loc0, pll_test_loc1, + usb_cc1, usb_cc2, ir_rx, tdm_ai_loc0, tdm_ai_loc1, dmic_loc0, dmic_loc1, + ai_loc0, ai_loc1, tp0, tp1, ao, uart2_disable, gspi_disable, sdio_disable, + hi_loc_disable, hi_loc0, hi_width_disable, hi_width_1bit, vtc_i2si_loc0, + vtc_tdm_loc0, vtc_dmic_loc0, vtc_i2si_loc1, vtc_tdm_loc1, vtc_dmic_loc1, + vtc_i2so, ve3_ejtag_loc0, aucpu0_ejtag_loc0, aucpu1_ejtag_loc0, ve3_ejtag_loc1, + aucpu0_ejtag_loc1, aucpu1_ejtag_loc1, ve3_ejtag_loc2, aucpu0_ejtag_loc2, + aucpu1_ejtag_loc2, scpu_ejtag_loc0, acpu_ejtag_loc0, vcpu_ejtag_loc0, + scpu_ejtag_loc1, acpu_ejtag_loc1, vcpu_ejtag_loc1, scpu_ejtag_loc2, + acpu_ejtag_loc2, vcpu_ejtag_loc2, ve3_ejtag_disable, aucpu0_ejtag_disable, + aucpu1_ejtag_disable, acpu_ejtag_disable, vcpu_ejtag_disable, + scpu_ejtag_disable, iso_gspi_disable, sf_disable, sf_enable, + arm_trace_debug_disable, arm_trace_debug_enable, pwm_normal, pwm_open_drain, + standby_dbg, test_loop_dis ] + + drive-strength: + enum: [4, 8] + + bias-pull-down: true + + bias-pull-up: true + + bias-disable: true + + input-schmitt-enable: true + + input-schmitt-disable: true + + drive-push-pull: true + + power-source: + description: | + Valid arguments are described as below: + 0: power supply of 1.8V + 1: power supply of 3.3V + enum: [0, 1] + + realtek,drive-strength-p: + description: | + Some of pins can be driven using the P-MOS and N-MOS transistor to + achieve finer adjustments. The block-diagram representation is as + follows: + VDD + | + ||--+ + +-----o|| P-MOS-FET + | ||--+ + IN --+ +----- out + | ||--+ + +------|| N-MOS-FET + ||--+ + | + GND + The driving strength of the P-MOS/N-MOS transistors impacts the + waveform's rise/fall times. Greater driving strength results in + shorter rise/fall times. Each P-MOS and N-MOS transistor offers + 8 configurable levels (0 to 7), with higher values indicating + greater driving strength, contributing to achieving the desired + speed. + + The realtek,drive-strength-p is used to control the driving strength + of the P-MOS output. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 7 + + realtek,drive-strength-n: + description: | + Similar to the realtek,drive-strength-p, the realtek,drive-strength-n + is used to control the driving strength of the N-MOS output. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 7 + + realtek,duty-cycle: + description: | + An integer describing the level to adjust output duty cycle, controlling + the proportion of positive and negative waveforms in nanoseconds. + Valid arguments are described as below: + 0: 0ns + 2: + 0.25ns + 3: + 0.5ns + 4: -0.25ns + 5: -0.5ns + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 2, 3, 4, 5 ] + + required: + - pins + + additionalProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + pinctrl@4e000 { + compatible = "realtek,rtd1619b-pinctrl"; + reg = <0x4e000 0x130>; + + emmc-hs200-pins { + pins = "emmc_clk", + "emmc_cmd", + "emmc_data_0", + "emmc_data_1", + "emmc_data_2", + "emmc_data_3", + "emmc_data_4", + "emmc_data_5", + "emmc_data_6", + "emmc_data_7"; + function = "emmc"; + realtek,drive-strength-p = <0x2>; + realtek,drive-strength-n = <0x2>; + }; + + i2c-0-pins { + pins = "gpio_12", + "gpio_13"; + function = "i2c0"; + drive-strength = <4>; + }; + }; diff --git a/dts/Bindings/pinctrl/renesas,pfc.yaml b/dts/Bindings/pinctrl/renesas,pfc.yaml index ac4e068aa0..181cd1676c 100644 --- a/dts/Bindings/pinctrl/renesas,pfc.yaml +++ b/dts/Bindings/pinctrl/renesas,pfc.yaml @@ -44,6 +44,8 @@ properties: - renesas,pfc-r8a77990 # R-Car E3 - renesas,pfc-r8a77995 # R-Car D3 - renesas,pfc-r8a779a0 # R-Car V3U + - renesas,pfc-r8a779f0 # R-Car S4-8 + - renesas,pfc-r8a779g0 # R-Car V4H - renesas,pfc-sh73a0 # SH-Mobile AG5 reg: @@ -70,6 +72,9 @@ properties: power-domains: maxItems: 1 +allOf: + - $ref: pinctrl.yaml# + required: - compatible - reg @@ -102,7 +107,6 @@ additionalProperties: Client device subnodes use below standard properties. properties: - phandle: true function: true groups: true pins: true @@ -122,9 +126,6 @@ additionalProperties: additionalProperties: false - type: object - properties: - phandle: true - additionalProperties: $ref: "#/additionalProperties/anyOf/0" diff --git a/dts/Bindings/pinctrl/renesas,rza1-ports.yaml b/dts/Bindings/pinctrl/renesas,rza1-ports.yaml index 7f80578dc2..2bd7d47d0f 100644 --- a/dts/Bindings/pinctrl/renesas,rza1-ports.yaml +++ b/dts/Bindings/pinctrl/renesas,rza1-ports.yaml @@ -31,6 +31,9 @@ properties: reg: maxItems: 1 +allOf: + - $ref: pinctrl.yaml# + required: - compatible - reg @@ -38,6 +41,7 @@ required: patternProperties: "^gpio-[0-9]*$": type: object + additionalProperties: false description: Each port of the r7s72100 pin controller hardware is itself a GPIO @@ -104,7 +108,6 @@ additionalProperties: Integers values in "pinmux" argument list are assembled as: ((PORT * 16 + PIN) | MUX_FUNC << 16) - phandle: true input-enable: true output-enable: true @@ -114,9 +117,6 @@ additionalProperties: additionalProperties: false - type: object - properties: - phandle: true - additionalProperties: $ref: "#/additionalProperties/anyOf/0" diff --git a/dts/Bindings/pinctrl/renesas,rza2-pinctrl.yaml b/dts/Bindings/pinctrl/renesas,rza2-pinctrl.yaml index ce1f734378..8b8e4e1a00 100644 --- a/dts/Bindings/pinctrl/renesas,rza2-pinctrl.yaml +++ b/dts/Bindings/pinctrl/renesas,rza2-pinctrl.yaml @@ -20,7 +20,7 @@ description: properties: compatible: - const: "renesas,r7s9210-pinctrl" # RZ/A2M + const: renesas,r7s9210-pinctrl # RZ/A2M reg: maxItems: 1 @@ -37,40 +37,40 @@ properties: gpio-ranges: maxItems: 1 -patternProperties: - "^.*$": - if: - type: object - then: - allOf: - - $ref: pincfg-node.yaml# - - $ref: pinmux-node.yaml# - description: - The child nodes of the pin controller designate pins to be used for - specific peripheral functions or as GPIO. +additionalProperties: + type: object + + allOf: + - $ref: pincfg-node.yaml# + - $ref: pinmux-node.yaml# - A pin multiplexing sub-node describes how to configure a set of - (or a single) pin in some desired alternate function mode. - The values for the pinmux properties are a combination of port name, - pin number and the desired function index. Use the RZA2_PINMUX macro - located in include/dt-bindings/pinctrl/r7s9210-pinctrl.h to easily - define these. - For assigning GPIO pins, use the macro RZA2_PIN also in - to express the desired port pin. + description: + The child nodes of the pin controller designate pins to be used for + specific peripheral functions or as GPIO. - properties: - phandle: true + A pin multiplexing sub-node describes how to configure a set of + (or a single) pin in some desired alternate function mode. + The values for the pinmux properties are a combination of port name, + pin number and the desired function index. Use the RZA2_PINMUX macro + located in include/dt-bindings/pinctrl/r7s9210-pinctrl.h to easily + define these. + For assigning GPIO pins, use the macro RZA2_PIN also in + to express the desired port pin. - pinmux: - description: - Values are constructed from GPIO port number, pin number, and - alternate function configuration number using the RZA2_PINMUX() - helper macro in r7s9210-pinctrl.h. + properties: + pinmux: + description: + Values are constructed from GPIO port number, pin number, and + alternate function configuration number using the RZA2_PINMUX() + helper macro in r7s9210-pinctrl.h. - required: - - pinmux + required: + - pinmux - additionalProperties: false + additionalProperties: false + +allOf: + - $ref: pinctrl.yaml# required: - compatible @@ -79,8 +79,6 @@ required: - '#gpio-cells' - gpio-ranges -additionalProperties: false - examples: - | #include <dt-bindings/pinctrl/r7s9210-pinctrl.h> diff --git a/dts/Bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/dts/Bindings/pinctrl/renesas,rzg2l-pinctrl.yaml index ef68dabcf4..d476de82e5 100644 --- a/dts/Bindings/pinctrl/renesas,rzg2l-pinctrl.yaml +++ b/dts/Bindings/pinctrl/renesas,rzg2l-pinctrl.yaml @@ -4,15 +4,15 @@ $id: http://devicetree.org/schemas/pinctrl/renesas,rzg2l-pinctrl.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Renesas RZ/G2L combined Pin and GPIO controller +title: Renesas RZ/{G2L,V2L} combined Pin and GPIO controller maintainers: - Geert Uytterhoeven <geert+renesas@glider.be> - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> description: - The Renesas SoCs of the RZ/G2L series feature a combined Pin and GPIO - controller. + The Renesas SoCs of the RZ/{G2L,V2L} alike series feature a combined Pin and + GPIO controller. Pin multiplexing and GPIO configuration is performed on a per-pin basis. Each port features up to 8 pins, each of them configurable for GPIO function (port mode) or in alternate function mode. @@ -20,8 +20,17 @@ description: properties: compatible: - enum: - - renesas,r9a07g044-pinctrl # RZ/G2{L,LC} + oneOf: + - items: + - enum: + - renesas,r9a07g043-pinctrl # RZ/G2UL{Type-1,Type-2} and RZ/Five + - renesas,r9a07g044-pinctrl # RZ/G2{L,LC} + - renesas,r9a08g045-pinctrl # RZ/G3S + + - items: + - enum: + - renesas,r9a07g054-pinctrl # RZ/V2L + - const: renesas,r9a07g044-pinctrl # RZ/G2{L,LC} fallback for RZ/V2L reg: maxItems: 1 @@ -39,6 +48,17 @@ properties: gpio-ranges: maxItems: 1 + interrupt-controller: true + + '#interrupt-cells': + const: 2 + description: + The first cell contains the global GPIO port index, constructed using the + RZG2L_GPIO() helper macro in <dt-bindings/pinctrl/rzg2l-pinctrl.h> and the + second cell is used to specify the flag. + E.g. "interrupts = <RZG2L_GPIO(43, 0) IRQ_TYPE_EDGE_FALLING>;" if P43_0 is + being used as an interrupt. + clocks: maxItems: 1 @@ -54,17 +74,32 @@ properties: additionalProperties: anyOf: - type: object + additionalProperties: false allOf: - $ref: pincfg-node.yaml# - $ref: pinmux-node.yaml# + - if: + properties: + compatible: + contains: + enum: + - renesas,r9a08g045-pinctrl + then: + properties: + drive-strength: false + output-impedance-ohms: false + slew-rate: false + else: + properties: + drive-strength-microamp: false + description: Pin controller client devices use pin configuration subnodes (children and grandchildren) for desired pin configuration. Client device subnodes use below standard properties. properties: - phandle: true pinmux: description: Values are constructed from GPIO port number, pin number, and @@ -73,7 +108,14 @@ additionalProperties: pins: true drive-strength: enum: [ 2, 4, 8, 12 ] + drive-strength-microamp: + enum: [ 1900, 2200, 4000, 4400, 4500, 4700, 5200, 5300, 5700, + 5800, 6000, 6050, 6100, 6550, 6800, 7000, 8000, 9000, + 10000 ] + output-impedance-ohms: + enum: [ 33, 50, 66, 100 ] power-source: + description: I/O voltage in millivolt. enum: [ 1800, 2500, 3300 ] slew-rate: true gpio-hog: true @@ -84,18 +126,20 @@ additionalProperties: line-name: true - type: object - properties: - phandle: true - additionalProperties: $ref: "#/additionalProperties/anyOf/0" +allOf: + - $ref: pinctrl.yaml# + required: - compatible - reg - gpio-controller - '#gpio-cells' - gpio-ranges + - interrupt-controller + - '#interrupt-cells' - clocks - power-domains - resets @@ -112,6 +156,8 @@ examples: gpio-controller; #gpio-cells = <2>; gpio-ranges = <&pinctrl 0 0 392>; + interrupt-controller; + #interrupt-cells = <2>; clocks = <&cpg CPG_MOD R9A07G044_GPIO_HCLK>; resets = <&cpg R9A07G044_GPIO_RSTN>, <&cpg R9A07G044_GPIO_PORT_RESETN>, @@ -139,17 +185,17 @@ examples: sd1_mux { pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>, /* CD */ <RZG2L_PORT_PINMUX(19, 1, 1)>; /* WP */ - power-source = <3300>; + power-source = <3300>; }; sd1_data { pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3"; - power-source = <3300>; + power-source = <3300>; }; sd1_ctrl { pins = "SD1_CLK", "SD1_CMD"; - power-source = <3300>; + power-source = <3300>; }; }; }; diff --git a/dts/Bindings/pinctrl/renesas,rzg2l-poeg.yaml b/dts/Bindings/pinctrl/renesas,rzg2l-poeg.yaml new file mode 100644 index 0000000000..ab2d456c93 --- /dev/null +++ b/dts/Bindings/pinctrl/renesas,rzg2l-poeg.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/renesas,rzg2l-poeg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/G2L Port Output Enable for GPT (POEG) + +maintainers: + - Biju Das <biju.das.jz@bp.renesas.com> + +description: | + The output pins(GTIOCxA and GTIOCxB) of the general PWM timer (GPT) can be + disabled by using the port output enabling function for the GPT (POEG). + Specifically, either of the following ways can be used. + * Input level detection of the GTETRGA to GTETRGD pins. + * Output-disable request from the GPT. + * SSF bit setting(ie, by setting POEGGn.SSF to 1) + + The state of the GTIOCxA and the GTIOCxB pins when the output is disabled, + are controlled by the GPT module. + +properties: + compatible: + items: + - enum: + - renesas,r9a07g044-poeg # RZ/G2{L,LC} + - renesas,r9a07g054-poeg # RZ/V2L + - const: renesas,rzg2l-poeg + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + renesas,gpt: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to gpt instance that serves the pwm operation. + + renesas,poeg-id: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3 ] + description: | + POEG group index. Valid values are: + <0> : POEG group A + <1> : POEG group B + <2> : POEG group C + <3> : POEG group D + +required: + - compatible + - reg + - interrupts + - clocks + - power-domains + - resets + - renesas,poeg-id + - renesas,gpt + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r9a07g044-cpg.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + poeggd: poeg@10049400 { + compatible = "renesas,r9a07g044-poeg", "renesas,rzg2l-poeg"; + reg = <0x10049400 0x400>; + interrupts = <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A07G044_POEG_D_CLKP>; + power-domains = <&cpg>; + resets = <&cpg R9A07G044_POEG_D_RST>; + renesas,poeg-id = <3>; + renesas,gpt = <&gpt>; + }; diff --git a/dts/Bindings/pinctrl/renesas,rzn1-pinctrl.yaml b/dts/Bindings/pinctrl/renesas,rzn1-pinctrl.yaml index 4a43af0d6e..816688580e 100644 --- a/dts/Bindings/pinctrl/renesas,rzn1-pinctrl.yaml +++ b/dts/Bindings/pinctrl/renesas,rzn1-pinctrl.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Renesas RZ/N1 Pin Controller maintainers: - - Gareth Williams <gareth.williams.jx@renesas.com> + - Fabrizio Castro <fabrizio.castro.jz@renesas.com> - Geert Uytterhoeven <geert+renesas@glider.be> properties: @@ -31,6 +31,9 @@ properties: description: The bus clock, sometimes described as pclk, for register accesses. +allOf: + - $ref: pinctrl.yaml# + required: - compatible - reg @@ -71,7 +74,6 @@ additionalProperties: offset by 10. Additional identifiers are provided to specify the MDIO source peripheral. - phandle: true bias-disable: true bias-pull-up: description: Pull up the pin with 50 kOhm @@ -88,9 +90,6 @@ additionalProperties: $ref: "#/additionalProperties/anyOf/0" - type: object - properties: - phandle: true - additionalProperties: $ref: "#/additionalProperties/anyOf/0" diff --git a/dts/Bindings/pinctrl/renesas,rzv2m-pinctrl.yaml b/dts/Bindings/pinctrl/renesas,rzv2m-pinctrl.yaml new file mode 100644 index 0000000000..5fa5d31f88 --- /dev/null +++ b/dts/Bindings/pinctrl/renesas,rzv2m-pinctrl.yaml @@ -0,0 +1,167 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/renesas,rzv2m-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/V2M combined Pin and GPIO controller + +maintainers: + - Fabrizio Castro <fabrizio.castro.jz@renesas.com> + - Geert Uytterhoeven <geert+renesas@glider.be> + +description: + The Renesas RZ/V2M SoC features a combined Pin and GPIO controller. + Pin multiplexing and GPIO configuration is performed on a per-pin basis. + Each port features up to 16 pins, each of them configurable for GPIO function + (port mode) or in alternate function mode. + Up to 8 different alternate function modes exist for each single pin. + +properties: + compatible: + const: renesas,r9a09g011-pinctrl # RZ/V2M + + reg: + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + const: 2 + description: + The first cell contains the global GPIO port index, constructed using the + RZV2M_GPIO() helper macro in <dt-bindings/pinctrl/rzv2m-pinctrl.h> and the + second cell represents consumer flag as mentioned in ../gpio/gpio.txt + E.g. "RZV2M_GPIO(8, 1)" for P8_1. + + gpio-ranges: + maxItems: 1 + + interrupts: + description: INEXINT[0..38] corresponding to individual pin inputs. + maxItems: 39 + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + +additionalProperties: + anyOf: + - type: object + additionalProperties: false + allOf: + - $ref: pincfg-node.yaml# + - $ref: pinmux-node.yaml# + + description: + Pin controller client devices use pin configuration subnodes (children + and grandchildren) for desired pin configuration. + Client device subnodes use below standard properties. + + properties: + pinmux: + description: + Values are constructed from GPIO port number, pin number, and + alternate function configuration number using the RZV2M_PORT_PINMUX() + helper macro in <dt-bindings/pinctrl/rzv2m-pinctrl.h>. + pins: true + bias-disable: true + bias-pull-down: true + bias-pull-up: true + drive-strength-microamp: + # Superset of supported values + enum: [ 1600, 1800, 2000, 3200, 3800, 4000, 6400, 7800, 8000, + 9000, 9600, 11000, 12000, 13000, 18000 ] + slew-rate: + description: 0 is slow slew rate, 1 is fast slew rate + enum: [ 0, 1 ] + gpio-hog: true + gpios: true + output-high: true + output-low: true + line-name: true + + - type: object + additionalProperties: + $ref: "#/additionalProperties/anyOf/0" + +allOf: + - $ref: pinctrl.yaml# + +required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + - gpio-ranges + - interrupts + - clocks + - power-domains + - resets + +examples: + - | + #include <dt-bindings/pinctrl/rzv2m-pinctrl.h> + #include <dt-bindings/clock/r9a09g011-cpg.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + pinctrl: pinctrl@b6250000 { + compatible = "renesas,r9a09g011-pinctrl"; + reg = <0xb6250000 0x800>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 0 352>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A09G011_PFC_PCLK>; + resets = <&cpg R9A09G011_PFC_PRESETN>; + power-domains = <&cpg>; + + i2c2_pins: i2c2 { + pinmux = <RZV2M_PORT_PINMUX(3, 8, 2)>, /* SDA */ + <RZV2M_PORT_PINMUX(3, 9, 2)>; /* SCL */ + }; + }; diff --git a/dts/Bindings/pinctrl/rockchip,pinctrl.txt b/dts/Bindings/pinctrl/rockchip,pinctrl.txt deleted file mode 100644 index 84c4111293..0000000000 --- a/dts/Bindings/pinctrl/rockchip,pinctrl.txt +++ /dev/null @@ -1,114 +0,0 @@ -* Rockchip Pinmux Controller - -The Rockchip Pinmux Controller, enables the IC -to share one PAD to several functional blocks. The sharing is done by -multiplexing the PAD input/output signals. For each PAD there are several -muxing options with option 0 being the use as a GPIO. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -The Rockchip pin configuration node is a node of a group of pins which can be -used for a specific device or function. This node represents both mux and -config of the pins in that group. The 'pins' selects the function mode(also -named pin mode) this pin can work on and the 'config' configures various pad -settings such as pull-up, etc. - -The pins are grouped into up to 5 individual pin banks which need to be -defined as gpio sub-nodes of the pinmux controller. - -Required properties for iomux controller: - - compatible: should be - "rockchip,px30-pinctrl": for Rockchip PX30 - "rockchip,rv1108-pinctrl": for Rockchip RV1108 - "rockchip,rk2928-pinctrl": for Rockchip RK2928 - "rockchip,rk3066a-pinctrl": for Rockchip RK3066a - "rockchip,rk3066b-pinctrl": for Rockchip RK3066b - "rockchip,rk3128-pinctrl": for Rockchip RK3128 - "rockchip,rk3188-pinctrl": for Rockchip RK3188 - "rockchip,rk3228-pinctrl": for Rockchip RK3228 - "rockchip,rk3288-pinctrl": for Rockchip RK3288 - "rockchip,rk3308-pinctrl": for Rockchip RK3308 - "rockchip,rk3328-pinctrl": for Rockchip RK3328 - "rockchip,rk3368-pinctrl": for Rockchip RK3368 - "rockchip,rk3399-pinctrl": for Rockchip RK3399 - "rockchip,rk3568-pinctrl": for Rockchip RK3568 - - - rockchip,grf: phandle referencing a syscon providing the - "general register files" - -Optional properties for iomux controller: - - rockchip,pmu: phandle referencing a syscon providing the pmu registers - as some SoCs carry parts of the iomux controller registers there. - Required for at least rk3188 and rk3288. On the rk3368 this should - point to the PMUGRF syscon. - -Deprecated properties for iomux controller: - - reg: first element is the general register space of the iomux controller - It should be large enough to contain also separate pull registers. - second element is the separate pull register space of the rk3188. - Use rockchip,grf and rockchip,pmu described above instead. - -Required properties for gpio sub nodes: -See rockchip,gpio-bank.yaml - -Required properties for pin configuration node: - - rockchip,pins: 3 integers array, represents a group of pins mux and config - setting. The format is rockchip,pins = <PIN_BANK PIN_BANK_IDX MUX &phandle>. - The MUX 0 means gpio and MUX 1 to N mean the specific device function. - The phandle of a node containing the generic pinconfig options - to use, as described in pinctrl-bindings.txt in this directory. - -Examples: - -#include <dt-bindings/pinctrl/rockchip.h> - -... - -pinctrl@20008000 { - compatible = "rockchip,rk3066a-pinctrl"; - rockchip,grf = <&grf>; - - #address-cells = <1>; - #size-cells = <1>; - ranges; - - gpio0: gpio0@20034000 { - compatible = "rockchip,gpio-bank"; - reg = <0x20034000 0x100>; - interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_gates8 9>; - - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - ... - - pcfg_pull_default: pcfg_pull_default { - bias-pull-pin-default - }; - - uart2 { - uart2_xfer: uart2-xfer { - rockchip,pins = <1 RK_PB0 1 &pcfg_pull_default>, - <1 RK_PB1 1 &pcfg_pull_default>; - }; - }; -}; - -uart2: serial@20064000 { - compatible = "snps,dw-apb-uart"; - reg = <0x20064000 0x400>; - interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <1>; - clocks = <&mux_uart2>; - - pinctrl-names = "default"; - pinctrl-0 = <&uart2_xfer>; -}; diff --git a/dts/Bindings/pinctrl/rockchip,pinctrl.yaml b/dts/Bindings/pinctrl/rockchip,pinctrl.yaml new file mode 100644 index 0000000000..20e806dce1 --- /dev/null +++ b/dts/Bindings/pinctrl/rockchip,pinctrl.yaml @@ -0,0 +1,190 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/rockchip,pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip Pinmux Controller + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +description: | + The Rockchip Pinmux Controller enables the IC to share one PAD + to several functional blocks. The sharing is done by multiplexing + the PAD input/output signals. For each PAD there are several muxing + options with option 0 being used as a GPIO. + + Please refer to pinctrl-bindings.txt in this directory for details of the + common pinctrl bindings used by client devices, including the meaning of the + phrase "pin configuration node". + + The Rockchip pin configuration node is a node of a group of pins which can be + used for a specific device or function. This node represents both mux and + config of the pins in that group. The 'pins' selects the function mode + (also named pin mode) this pin can work on and the 'config' configures + various pad settings such as pull-up, etc. + + The pins are grouped into up to 9 individual pin banks which need to be + defined as gpio sub-nodes of the pinmux controller. + +properties: + compatible: + enum: + - rockchip,px30-pinctrl + - rockchip,rk2928-pinctrl + - rockchip,rk3036-pinctrl + - rockchip,rk3066a-pinctrl + - rockchip,rk3066b-pinctrl + - rockchip,rk3128-pinctrl + - rockchip,rk3188-pinctrl + - rockchip,rk3228-pinctrl + - rockchip,rk3288-pinctrl + - rockchip,rk3308-pinctrl + - rockchip,rk3328-pinctrl + - rockchip,rk3368-pinctrl + - rockchip,rk3399-pinctrl + - rockchip,rk3568-pinctrl + - rockchip,rk3588-pinctrl + - rockchip,rv1108-pinctrl + - rockchip,rv1126-pinctrl + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + The phandle of the syscon node for the GRF registers. + + rockchip,pmu: + $ref: /schemas/types.yaml#/definitions/phandle + description: + The phandle of the syscon node for the PMU registers, + as some SoCs carry parts of the iomux controller registers there. + Required for at least rk3188 and rk3288. On the rk3368 this should + point to the PMUGRF syscon. + + "#address-cells": + enum: [1, 2] + + "#size-cells": + enum: [1, 2] + + ranges: true + +allOf: + - $ref: pinctrl.yaml# + +required: + - compatible + - rockchip,grf + +patternProperties: + "gpio@[0-9a-f]+$": + type: object + + $ref: /schemas/gpio/rockchip,gpio-bank.yaml# + deprecated: true + + unevaluatedProperties: false + + "pcfg-[a-z0-9-]+$": + type: object + properties: + bias-disable: true + + bias-pull-down: true + + bias-pull-pin-default: true + + bias-pull-up: true + + drive-strength: + minimum: 0 + maximum: 20 + + input-enable: true + + input-schmitt-enable: true + + output-high: true + + output-low: true + + additionalProperties: false + +additionalProperties: + type: object + additionalProperties: + type: object + additionalProperties: false + + properties: + rockchip,pins: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + minItems: 1 + items: + items: + - minimum: 0 + maximum: 8 + description: + Pin bank. + - minimum: 0 + maximum: 31 + description: + Pin bank index. + - minimum: 0 + maximum: 13 + description: + Mux 0 means GPIO and mux 1 to N means + the specific device function. + - description: + The phandle of a node contains the generic pinconfig options + to use as described in pinctrl-bindings.txt. + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/pinctrl/rockchip.h> + + pinctrl: pinctrl { + compatible = "rockchip,rk3066a-pinctrl"; + rockchip,grf = <&grf>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio0: gpio@20034000 { + compatible = "rockchip,gpio-bank"; + reg = <0x20034000 0x100>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_gates8 9>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + pcfg_pull_default: pcfg-pull-default { + bias-pull-pin-default; + }; + + uart2 { + uart2_xfer: uart2-xfer { + rockchip,pins = <1 RK_PB0 1 &pcfg_pull_default>, + <1 RK_PB1 1 &pcfg_pull_default>; + }; + }; + }; + + uart2: serial@20064000 { + compatible = "snps,dw-apb-uart"; + reg = <0x20064000 0x400>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mux_uart2>; + pinctrl-0 = <&uart2_xfer>; + pinctrl-names = "default"; + reg-io-width = <1>; + reg-shift = <2>; + }; diff --git a/dts/Bindings/pinctrl/samsung,pinctrl-gpio-bank.yaml b/dts/Bindings/pinctrl/samsung,pinctrl-gpio-bank.yaml new file mode 100644 index 0000000000..8cf3c47ab8 --- /dev/null +++ b/dts/Bindings/pinctrl/samsung,pinctrl-gpio-bank.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/samsung,pinctrl-gpio-bank.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S3C/S5P/Exynos SoC pin controller - gpio bank + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + - Tomasz Figa <tomasz.figa@gmail.com> + +description: | + This is a part of device tree bindings for Samsung S3C/S5P/Exynos SoC pin + controller. + + GPIO bank description for Samsung S3C/S5P/Exynos SoC pin controller. + + See also Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml for + additional information and example. + +properties: + '#gpio-cells': + const: 2 + + gpio-controller: true + + '#interrupt-cells': + description: + For GPIO banks supporting external GPIO interrupts or external wake-up + interrupts. + const: 2 + + interrupt-controller: + description: + For GPIO banks supporting external GPIO interrupts or external wake-up + interrupts. + + interrupts: + description: + For GPIO banks supporting direct external wake-up interrupts (without + multiplexing). Number of interrupts must match number of wake-up capable + pins of this bank. + minItems: 1 + maxItems: 8 + +required: + - '#gpio-cells' + - gpio-controller + +additionalProperties: false diff --git a/dts/Bindings/pinctrl/samsung,pinctrl-pins-cfg.yaml b/dts/Bindings/pinctrl/samsung,pinctrl-pins-cfg.yaml new file mode 100644 index 0000000000..f796f27bf0 --- /dev/null +++ b/dts/Bindings/pinctrl/samsung,pinctrl-pins-cfg.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/samsung,pinctrl-pins-cfg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S3C/S5P/Exynos SoC pin controller - pins configuration + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + - Tomasz Figa <tomasz.figa@gmail.com> + +description: | + This is a part of device tree bindings for Samsung S3C/S5P/Exynos SoC pin + controller. + + Pins configuration for Samsung S3C/S5P/Exynos SoC pin controller. + + The values used for config properties should be derived from the hardware + manual and these values are programmed as-is into the pin pull up/down and + driver strength register of the pin-controller. + + See also Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml for + additional information and example. + +properties: + samsung,pins: + description: | + List of pins to configure. For initial and sleep states, the maximum + number is one pin. In other cases there is no upper limit. + + The pins should use lowercase names matching hardware manual, e.g. for + GPA0 bank: gpa0-0, gpa0-1, gpa0-2. + $ref: /schemas/types.yaml#/definitions/string-array + + samsung,pin-function: + description: | + The pin function selection that should be applied on the pins listed in the + child node is specified using the "samsung,pin-function" property. The value + of this property that should be applied to each of the pins listed in the + "samsung,pins" property should be picked from the hardware manual of the SoC + for the specified pin group. This property is optional in the child node if + no specific function selection is desired for the pins listed in the child + node. The value of this property is used as-is to program the pin-controller + function selector register of the pin-bank. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + + samsung,pin-drv: + description: Drive strength configuration. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + + samsung,pin-pud: + description: Pull up/down configuration. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + + samsung,pin-val: + description: Initial value of pin output buffer. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + + samsung,pin-con-pdn: + description: Function in power down mode. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + + samsung,pin-pud-pdn: + description: Pull up/down configuration in power down mode. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + +required: + - samsung,pins + +additionalProperties: false diff --git a/dts/Bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml b/dts/Bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml new file mode 100644 index 0000000000..4dfb49b0e0 --- /dev/null +++ b/dts/Bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml @@ -0,0 +1,121 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S3C/S5P/Exynos SoC pin controller - wake-up interrupt controller + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + - Tomasz Figa <tomasz.figa@gmail.com> + +description: | + This is a part of device tree bindings for Samsung S3C/S5P/Exynos SoC pin + controller. + + External wake-up interrupts for Samsung S3C/S5P/Exynos SoC pin controller. + For S3C24xx, S3C64xx, S5PV210 and Exynos4210 compatible wake-up interrupt + controllers, only one pin-controller device node can include external wake-up + interrupts child node (in other words, only one External wake-up interrupts + pin-controller is supported). + For newer controllers, multiple pin-controller device node can include + external wake-up interrupts child node. + + See also Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml for + additional information and example. + +properties: + compatible: + oneOf: + - enum: + - samsung,s3c2410-wakeup-eint + - samsung,s3c2412-wakeup-eint + - samsung,s3c64xx-wakeup-eint + - samsung,s5pv210-wakeup-eint + - samsung,exynos4210-wakeup-eint + - samsung,exynos7-wakeup-eint + - samsung,exynosautov920-wakeup-eint + - items: + - enum: + - samsung,exynos5433-wakeup-eint + - samsung,exynos7885-wakeup-eint + - samsung,exynos850-wakeup-eint + - const: samsung,exynos7-wakeup-eint + - items: + - enum: + - google,gs101-wakeup-eint + - samsung,exynosautov9-wakeup-eint + - const: samsung,exynos850-wakeup-eint + - const: samsung,exynos7-wakeup-eint + + interrupts: + description: + Interrupt used by multiplexed external wake-up interrupts. + minItems: 1 + maxItems: 6 + +required: + - compatible + +allOf: + - if: + properties: + compatible: + contains: + enum: + - samsung,s3c2410-wakeup-eint + - samsung,s3c2412-wakeup-eint + then: + properties: + interrupts: + minItems: 6 + maxItems: 6 + required: + - interrupts + + - if: + properties: + compatible: + contains: + const: samsung,s3c64xx-wakeup-eint + then: + properties: + interrupts: + minItems: 4 + maxItems: 4 + required: + - interrupts + + - if: + properties: + compatible: + # Match without "contains", to skip newer variants which are still + # compatible with samsung,exynos7-wakeup-eint + enum: + - samsung,s5pv210-wakeup-eint + - samsung,exynos4210-wakeup-eint + - samsung,exynos5433-wakeup-eint + - samsung,exynos7-wakeup-eint + - samsung,exynos7885-wakeup-eint + then: + properties: + interrupts: + minItems: 1 + maxItems: 1 + required: + - interrupts + + - if: + properties: + compatible: + contains: + enum: + - samsung,exynos850-wakeup-eint + - samsung,exynosautov920-wakeup-eint + then: + properties: + interrupts: false + +additionalProperties: false diff --git a/dts/Bindings/pinctrl/samsung,pinctrl.yaml b/dts/Bindings/pinctrl/samsung,pinctrl.yaml new file mode 100644 index 0000000000..118549c259 --- /dev/null +++ b/dts/Bindings/pinctrl/samsung,pinctrl.yaml @@ -0,0 +1,390 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/samsung,pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S3C/S5P/Exynos SoC pin controller + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + - Tomasz Figa <tomasz.figa@gmail.com> + +description: | + This is a part of device tree bindings for Samsung S3C/S5P/Exynos SoC pin + controller. + + All the pin controller nodes should be represented in the aliases node using + the following format 'pinctrl{n}' where n is a unique number for the alias. + + The controller supports three types of interrupts:: + - External GPIO interrupts (see interrupts property in pin controller node); + + - External wake-up interrupts - multiplexed (capable of waking up the system + see interrupts property in external wake-up interrupt controller node - + samsung,pinctrl-wakeup-interrupt.yaml); + + - External wake-up interrupts - direct (capable of waking up the system, see + interrupts property in every bank of pin controller with external wake-up + interrupt controller - samsung,pinctrl-gpio-bank.yaml). + +properties: + $nodename: + pattern: "^pinctrl(@.*)?" + + compatible: + enum: + - google,gs101-pinctrl + - samsung,s3c2412-pinctrl + - samsung,s3c2416-pinctrl + - samsung,s3c2440-pinctrl + - samsung,s3c2450-pinctrl + - samsung,s3c64xx-pinctrl + - samsung,s5pv210-pinctrl + - samsung,exynos3250-pinctrl + - samsung,exynos4210-pinctrl + - samsung,exynos4x12-pinctrl + - samsung,exynos5250-pinctrl + - samsung,exynos5260-pinctrl + - samsung,exynos5410-pinctrl + - samsung,exynos5420-pinctrl + - samsung,exynos5433-pinctrl + - samsung,exynos7-pinctrl + - samsung,exynos7885-pinctrl + - samsung,exynos850-pinctrl + - samsung,exynosautov9-pinctrl + - samsung,exynosautov920-pinctrl + - tesla,fsd-pinctrl + + interrupts: + description: + Required for GPIO banks supporting external GPIO interrupts. + maxItems: 1 + + power-domains: + maxItems: 1 + + reg: + description: + Second base address of the pin controller if the specific registers of + the pin controller are separated into the different base address. + Only certain banks of certain pin controller might need it. + minItems: 1 + maxItems: 2 + + wakeup-interrupt-controller: + $ref: samsung,pinctrl-wakeup-interrupt.yaml + +patternProperties: + "^[a-z]+[0-9]*-gpio-bank$": + description: + Pin banks of the controller are represented by child nodes of the + controller node. Bank name is taken from name of the node. + $ref: samsung,pinctrl-gpio-bank.yaml + + "^[a-z0-9-]+-pins$": + oneOf: + - $ref: samsung,pinctrl-pins-cfg.yaml + required: + - samsung,pins + - type: object + patternProperties: + "^[a-z0-9-]+-pins$": + $ref: samsung,pinctrl-pins-cfg.yaml + + additionalProperties: false + + "^(initial|sleep)-state$": + type: object + additionalProperties: false + + patternProperties: + "^(pin-[a-z0-9-]+|[a-z0-9-]+-pin)$": + $ref: samsung,pinctrl-pins-cfg.yaml + + properties: + samsung,pins: + description: See samsung,pinctrl-pins-cfg.yaml + $ref: /schemas/types.yaml#/definitions/string-array + maxItems: 1 + + required: + - samsung,pins + + unevaluatedProperties: false + +required: + - compatible + - reg + +allOf: + - $ref: pinctrl.yaml# + - if: + properties: + compatible: + contains: + const: samsung,exynos5433-pinctrl + then: + properties: + reg: + minItems: 1 + maxItems: 2 + else: + properties: + reg: + minItems: 1 + maxItems: 1 + +additionalProperties: false + +examples: + - | + pinctrl@7f008000 { + compatible = "samsung,s3c64xx-pinctrl"; + reg = <0x7f008000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <21>; + + wakeup-interrupt-controller { + compatible = "samsung,s3c64xx-wakeup-eint"; + interrupts-extended = <&vic0 0>, + <&vic0 1>, + <&vic1 0>, + <&vic1 1>; + }; + + /* Pin bank with external GPIO or muxed external wake-up interrupts */ + gpa-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + // ... + + uart0-data-pins { + samsung,pins = "gpa-0", "gpa-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + }; + + // ... + }; + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + pinctrl@11400000 { + compatible = "samsung,exynos4210-pinctrl"; + reg = <0x11400000 0x1000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&sleep0>; + + /* Pin bank with external GPIO or muxed external wake-up interrupts */ + gpa0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + // ... + + uart0-data-pins { + samsung,pins = "gpa0-0", "gpa0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + // ... + + sleep0: sleep-state { + gpa0-0-pin { + samsung,pins = "gpa0-0"; + samsung,pin-con-pdn = <2>; + samsung,pin-pud-pdn = <0>; + }; + + gpa0-1-pin { + samsung,pins = "gpa0-1"; + samsung,pin-con-pdn = <0>; + samsung,pin-pud-pdn = <0>; + }; + + // ... + }; + }; + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + pinctrl@11000000 { + compatible = "samsung,exynos4210-pinctrl"; + reg = <0x11000000 0x1000>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + + wakeup-interrupt-controller { + compatible = "samsung,exynos4210-wakeup-eint"; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + }; + + /* Pin bank with external GPIO or muxed external wake-up interrupts */ + gpj0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + /* Pin bank without external interrupts */ + gpy0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + }; + + /* Pin bank with external direct wake-up interrupts */ + gpx0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + }; + + // ... + + sd0-clk-pins { + samsung,pins = "gpk0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd4-bus-width8-pins { + part-1-pins { + samsung,pins = "gpk0-3", "gpk0-4", + "gpk0-5", "gpk0-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + part-2-pins { + samsung,pins = "gpk1-3", "gpk1-4", + "gpk1-5", "gpk1-6"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + }; + + // ... + + otg-gp-pins { + samsung,pins = "gpx3-3"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + samsung,pin-val = <0>; + }; + }; + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + pinctrl@10580000 { + compatible = "samsung,exynos5433-pinctrl"; + reg = <0x10580000 0x1a20>, <0x11090000 0x100>; + + pinctrl-names = "default"; + pinctrl-0 = <&initial_alive>; + + wakeup-interrupt-controller { + compatible = "samsung,exynos5433-wakeup-eint", + "samsung,exynos7-wakeup-eint"; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + }; + + /* Pin bank with external direct wake-up interrupts */ + gpa0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + }; + + // ... + + te-irq-pins { + samsung,pins = "gpf1-3"; + samsung,pin-function = <0xf>; + }; + + // .. + + initial_alive: initial-state { + gpa0-0-pin { + samsung,pins = "gpa0-0"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; + + // ... + }; + }; + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + pinctrl@114b0000 { + compatible = "samsung,exynos5433-pinctrl"; + reg = <0x114b0000 0x1000>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&pd_aud>; + + /* Pin bank with external GPIO or muxed external wake-up interrupts */ + gpz0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + // ... + + i2s0-bus-pins { + samsung,pins = "gpz0-0", "gpz0-1", "gpz0-2", "gpz0-3", + "gpz0-4", "gpz0-5", "gpz0-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + // ... + }; diff --git a/dts/Bindings/pinctrl/samsung-pinctrl.txt b/dts/Bindings/pinctrl/samsung-pinctrl.txt deleted file mode 100644 index e7a1b18803..0000000000 --- a/dts/Bindings/pinctrl/samsung-pinctrl.txt +++ /dev/null @@ -1,381 +0,0 @@ -Samsung GPIO and Pin Mux/Config controller - -Samsung's ARM based SoC's integrates a GPIO and Pin mux/config hardware -controller. It controls the input/output settings on the available pads/pins -and also provides ability to multiplex and configure the output of various -on-chip controllers onto these pads. - -Required Properties: -- compatible: should be one of the following. - - "samsung,s3c2412-pinctrl": for S3C2412-compatible pin-controller, - - "samsung,s3c2416-pinctrl": for S3C2416-compatible pin-controller, - - "samsung,s3c2440-pinctrl": for S3C2440-compatible pin-controller, - - "samsung,s3c2450-pinctrl": for S3C2450-compatible pin-controller, - - "samsung,s3c64xx-pinctrl": for S3C64xx-compatible pin-controller, - - "samsung,s5pv210-pinctrl": for S5PV210-compatible pin-controller, - - "samsung,exynos3250-pinctrl": for Exynos3250 compatible pin-controller. - - "samsung,exynos4210-pinctrl": for Exynos4210 compatible pin-controller. - - "samsung,exynos4x12-pinctrl": for Exynos4x12 compatible pin-controller. - - "samsung,exynos5250-pinctrl": for Exynos5250 compatible pin-controller. - - "samsung,exynos5260-pinctrl": for Exynos5260 compatible pin-controller. - - "samsung,exynos5410-pinctrl": for Exynos5410 compatible pin-controller. - - "samsung,exynos5420-pinctrl": for Exynos5420 compatible pin-controller. - - "samsung,exynos5433-pinctrl": for Exynos5433 compatible pin-controller. - - "samsung,exynos7-pinctrl": for Exynos7 compatible pin-controller. - - "samsung,exynos850-pinctrl": for Exynos850 compatible pin-controller. - -- reg: Base address of the pin controller hardware module and length of - the address space it occupies. - - - reg: Second base address of the pin controller if the specific registers - of the pin controller are separated into the different base address. - - Eg: GPF[1-5] of Exynos5433 are separated into the two base address. - - First base address is for GPAx and GPF[1-5] external interrupt - registers. - - Second base address is for GPF[1-5] pinctrl registers. - - pinctrl_0: pinctrl@10580000 { - compatible = "samsung,exynos5433-pinctrl"; - reg = <0x10580000 0x1a20>, <0x11090000 0x100>; - - wakeup-interrupt-controller { - compatible = "samsung,exynos7-wakeup-eint"; - interrupts = <0 16 0>; - }; - }; - -- Pin banks as child nodes: Pin banks of the controller are represented by child - nodes of the controller node. Bank name is taken from name of the node. Each - bank node must contain following properties: - - - gpio-controller: identifies the node as a gpio controller and pin bank. - - #gpio-cells: number of cells in GPIO specifier. Since the generic GPIO - binding is used, the amount of cells must be specified as 2. See the below - mentioned gpio binding representation for description of particular cells. - - Eg: <&gpx2 6 0> - <[phandle of the gpio controller node] - [pin number within the gpio controller] - [flags]> - - Values for gpio specifier: - - Pin number: is a value between 0 to 7. - - Flags: 0 - Active High - 1 - Active Low - -- Pin mux/config groups as child nodes: The pin mux (selecting pin function - mode) and pin config (pull up/down, driver strength) settings are represented - as child nodes of the pin-controller node. There should be at least one - child node and there is no limit on the count of these child nodes. It is - also possible for a child node to consist of several further child nodes - to allow grouping multiple pinctrl groups into one. The format of second - level child nodes is exactly the same as for first level ones and is - described below. - - The child node should contain a list of pin(s) on which a particular pin - function selection or pin configuration (or both) have to applied. This - list of pins is specified using the property name "samsung,pins". There - should be at least one pin specified for this property and there is no upper - limit on the count of pins that can be specified. The pins are specified - using pin names which are derived from the hardware manual of the SoC. As - an example, the pins in GPA0 bank of the pin controller can be represented - as "gpa0-0", "gpa0-1", "gpa0-2" and so on. The names should be in lower case. - The format of the pin names should be (as per the hardware manual) - "[pin bank name]-[pin number within the bank]". - - The pin function selection that should be applied on the pins listed in the - child node is specified using the "samsung,pin-function" property. The value - of this property that should be applied to each of the pins listed in the - "samsung,pins" property should be picked from the hardware manual of the SoC - for the specified pin group. This property is optional in the child node if - no specific function selection is desired for the pins listed in the child - node. The value of this property is used as-is to program the pin-controller - function selector register of the pin-bank. - - The child node can also optionally specify one or more of the pin - configuration that should be applied on all the pins listed in the - "samsung,pins" property of the child node. The following pin configuration - properties are supported. - - - samsung,pin-val: Initial value of pin output buffer. - - samsung,pin-pud: Pull up/down configuration. - - samsung,pin-drv: Drive strength configuration. - - samsung,pin-pud-pdn: Pull up/down configuration in power down mode. - - samsung,pin-drv-pdn: Drive strength configuration in power down mode. - - The values specified by these config properties should be derived from the - hardware manual and these values are programmed as-is into the pin - pull up/down and driver strength register of the pin-controller. - - Note: A child should include at least a pin function selection property or - pin configuration property (one or more) or both. - - The client nodes that require a particular pin function selection and/or - pin configuration should use the bindings listed in the "pinctrl-bindings.txt" - file. - -External GPIO and Wakeup Interrupts: - -The controller supports two types of external interrupts over gpio. The first -is the external gpio interrupt and second is the external wakeup interrupts. -The difference between the two is that the external wakeup interrupts can be -used as system wakeup events. - -A. External GPIO Interrupts: For supporting external gpio interrupts, the - following properties should be specified in the pin-controller device node. - - - interrupts: interrupt specifier for the controller. The format and value of - the interrupt specifier depends on the interrupt parent for the controller. - - In addition, following properties must be present in node of every bank - of pins supporting GPIO interrupts: - - - interrupt-controller: identifies the controller node as interrupt-parent. - - #interrupt-cells: the value of this property should be 2. - - First Cell: represents the external gpio interrupt number local to the - external gpio interrupt space of the controller. - - Second Cell: flags to identify the type of the interrupt - - 1 = rising edge triggered - - 2 = falling edge triggered - - 3 = rising and falling edge triggered - - 4 = high level triggered - - 8 = low level triggered - -B. External Wakeup Interrupts: For supporting external wakeup interrupts, a - child node representing the external wakeup interrupt controller should be - included in the pin-controller device node. - - Only one pin-controller device node can include external wakeup interrupts - child node (in other words, only one External Wakeup Interrupts - pin-controller is supported). - - This child node should include following properties: - - - compatible: identifies the type of the external wakeup interrupt controller - The possible values are: - - samsung,s3c2410-wakeup-eint: represents wakeup interrupt controller - found on Samsung S3C24xx SoCs except S3C2412 and S3C2413, - - samsung,s3c2412-wakeup-eint: represents wakeup interrupt controller - found on Samsung S3C2412 and S3C2413 SoCs, - - samsung,s3c64xx-wakeup-eint: represents wakeup interrupt controller - found on Samsung S3C64xx SoCs, - - samsung,s5pv210-wakeup-eint: represents wakeup interrupt controller - found on Samsung S5Pv210 SoCs, - - samsung,exynos4210-wakeup-eint: represents wakeup interrupt controller - found on Samsung Exynos4210 and S5PC110/S5PV210 SoCs. - - samsung,exynos7-wakeup-eint: represents wakeup interrupt controller - found on Samsung Exynos7 SoC. - - interrupts: interrupt used by multiplexed wakeup interrupts. - - In addition, following properties must be present in node of every bank - of pins supporting wake-up interrupts: - - - interrupt-controller: identifies the node as interrupt-parent. - - #interrupt-cells: the value of this property should be 2 - - First Cell: represents the external wakeup interrupt number local to - the external wakeup interrupt space of the controller. - - Second Cell: flags to identify the type of the interrupt - - 1 = rising edge triggered - - 2 = falling edge triggered - - 3 = rising and falling edge triggered - - 4 = high level triggered - - 8 = low level triggered - - Node of every bank of pins supporting direct wake-up interrupts (without - multiplexing) must contain following properties: - - - interrupts: interrupts of the interrupt parent which are used for external - wakeup interrupts from pins of the bank, must contain interrupts for all - pins of the bank. - -Aliases: - -All the pin controller nodes should be represented in the aliases node using -the following format 'pinctrl{n}' where n is a unique number for the alias. - -Aliases for controllers compatible with "samsung,exynos7-pinctrl": -- pinctrl0: pin controller of ALIVE block, -- pinctrl1: pin controller of BUS0 block, -- pinctrl2: pin controller of NFC block, -- pinctrl3: pin controller of TOUCH block, -- pinctrl4: pin controller of FF block, -- pinctrl5: pin controller of ESE block, -- pinctrl6: pin controller of FSYS0 block, -- pinctrl7: pin controller of FSYS1 block, -- pinctrl8: pin controller of BUS1 block, -- pinctrl9: pin controller of AUDIO block, - -Example: A pin-controller node with pin banks: - - pinctrl_0: pinctrl@11400000 { - compatible = "samsung,exynos4210-pinctrl"; - reg = <0x11400000 0x1000>; - interrupts = <0 47 0>; - - /* ... */ - - /* Pin bank without external interrupts */ - gpy0: gpy0 { - gpio-controller; - #gpio-cells = <2>; - }; - - /* ... */ - - /* Pin bank with external GPIO or muxed wake-up interrupts */ - gpj0: gpj0 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - /* ... */ - - /* Pin bank with external direct wake-up interrupts */ - gpx0: gpx0 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - interrupt-parent = <&gic>; - interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, - <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>; - #interrupt-cells = <2>; - }; - - /* ... */ - }; - -Example 1: A pin-controller node with pin groups. - - #include <dt-bindings/pinctrl/samsung.h> - - pinctrl_0: pinctrl@11400000 { - compatible = "samsung,exynos4210-pinctrl"; - reg = <0x11400000 0x1000>; - interrupts = <0 47 0>; - - /* ... */ - - uart0_data: uart0-data { - samsung,pins = "gpa0-0", "gpa0-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - uart0_fctl: uart0-fctl { - samsung,pins = "gpa0-2", "gpa0-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - uart1_data: uart1-data { - samsung,pins = "gpa0-4", "gpa0-5"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - uart1_fctl: uart1-fctl { - samsung,pins = "gpa0-6", "gpa0-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - i2c2_bus: i2c2-bus { - samsung,pins = "gpa0-6", "gpa0-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - sd4_bus8: sd4-bus-width8 { - part-1 { - samsung,pins = "gpk0-3", "gpk0-4", - "gpk0-5", "gpk0-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - part-2 { - samsung,pins = "gpk1-3", "gpk1-4", - "gpk1-5", "gpk1-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_4>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - }; - }; - -Example 2: A pin-controller node with external wakeup interrupt controller node. - - pinctrl_1: pinctrl@11000000 { - compatible = "samsung,exynos4210-pinctrl"; - reg = <0x11000000 0x1000>; - interrupts = <0 46 0> - - /* ... */ - - wakeup-interrupt-controller { - compatible = "samsung,exynos4210-wakeup-eint"; - interrupt-parent = <&gic>; - interrupts = <0 32 0>; - }; - }; - -Example 3: A uart client node that supports 'default' and 'flow-control' states. - - uart@13800000 { - compatible = "samsung,exynos4210-uart"; - reg = <0x13800000 0x100>; - interrupts = <0 52 0>; - pinctrl-names = "default", "flow-control; - pinctrl-0 = <&uart0_data>; - pinctrl-1 = <&uart0_data>, <&uart0_fctl>; - }; - -Example 4: Set up the default pin state for uart controller. - - static int s3c24xx_serial_probe(struct platform_device *pdev) { - struct pinctrl *pinctrl; - - /* ... */ - - pinctrl = devm_pinctrl_get_select_default(&pdev->dev); - } - -Example 5: A display port client node that supports 'default' pinctrl state - and gpio binding. - - display-port-controller { - /* ... */ - - samsung,hpd-gpio = <&gpx2 6 0>; - pinctrl-names = "default"; - pinctrl-0 = <&dp_hpd>; - }; - -Example 6: Request the gpio for display port controller - - static int exynos_dp_probe(struct platform_device *pdev) - { - int hpd_gpio, ret; - struct device *dev = &pdev->dev; - struct device_node *dp_node = dev->of_node; - - /* ... */ - - hpd_gpio = of_get_named_gpio(dp_node, "samsung,hpd-gpio", 0); - - /* ... */ - - ret = devm_gpio_request_one(&pdev->dev, hpd_gpio, GPIOF_IN, - "hpd_gpio"); - /* ... */ - } diff --git a/dts/Bindings/pinctrl/semtech,sx1501q.yaml b/dts/Bindings/pinctrl/semtech,sx1501q.yaml new file mode 100644 index 0000000000..4214d7311f --- /dev/null +++ b/dts/Bindings/pinctrl/semtech,sx1501q.yaml @@ -0,0 +1,208 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2022 Linaro Ltd. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/semtech,sx1501q.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Semtech SX150x GPIO expander + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +properties: + compatible: + enum: + - semtech,sx1501q + - semtech,sx1502q + - semtech,sx1503q + - semtech,sx1504q + - semtech,sx1505q + - semtech,sx1506q + - semtech,sx1507q + - semtech,sx1508q + - semtech,sx1509q + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#interrupt-cells': + const: 2 + + interrupt-controller: true + + '#gpio-cells': + const: 2 + + gpio-controller: true + + semtech,probe-reset: + description: Will trigger a reset of the GPIO expander on probe + type: boolean + +patternProperties: + '-cfg$': + type: object + properties: + pins: true + + bias-disable: true + bias-pull-up: true + bias-pull-down: true + bias-pull-pin-default: true + drive-push-pull: true + output-low: true + output-high: true + drive-open-drain: true + + required: + - pins + + allOf: + - $ref: pincfg-node.yaml# + - $ref: pinmux-node.yaml# + - if: + properties: + pins: + contains: + const: oscio + then: + properties: + bias-disable: false + bias-pull-up: false + bias-pull-down: false + bias-pull-pin-default: false + drive-open-drain: false + + additionalProperties: false + +required: + - compatible + - reg + - '#gpio-cells' + - gpio-controller + +allOf: + - $ref: pinctrl.yaml# + - if: + not: + properties: + compatible: + contains: + enum: + - semtech,sx1507q + - semtech,sx1508q + - semtech,sx1509q + then: + properties: + semtech,probe-reset: false + - if: + properties: + compatible: + contains: + enum: + - semtech,sx1501q + - semtech,sx1504q + then: + patternProperties: + '-cfg$': + properties: + pins: + items: + pattern: '^gpio[0-3]$' + - if: + properties: + compatible: + contains: + enum: + - semtech,sx1502q + - semtech,sx1505q + then: + patternProperties: + '-cfg$': + properties: + pins: + items: + pattern: '^gpio[0-7]$' + - if: + properties: + compatible: + contains: + enum: + - semtech,sx1503q + - semtech,sx1506q + then: + patternProperties: + '-cfg$': + properties: + pins: + items: + pattern: '^(gpio[0-9]|gpio1[0-5])$' + - if: + properties: + compatible: + contains: + const: semtech,sx1507q + then: + patternProperties: + '-cfg$': + properties: + pins: + items: + pattern: '^(oscio|gpio[0-3])$' + - if: + properties: + compatible: + contains: + const: semtech,sx1508q + then: + patternProperties: + '-cfg$': + properties: + pins: + items: + pattern: '^(oscio|gpio[0-7])$' + - if: + properties: + compatible: + contains: + const: semtech,sx1509q + then: + patternProperties: + '-cfg$': + properties: + pins: + items: + pattern: '^(oscio|gpio[0-9]|gpio1[0-5])$' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c@1000 { + reg = <0x1000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl@20 { + compatible = "semtech,sx1501q"; + reg = <0x20>; + + #gpio-cells = <2>; + #interrupt-cells = <2>; + + interrupts = <16 IRQ_TYPE_EDGE_FALLING>; + + gpio-controller; + interrupt-controller; + + gpio1-cfg { + pins = "gpio1"; + bias-pull-up; + }; + }; + }; diff --git a/dts/Bindings/pinctrl/socionext,uniphier-pinctrl.yaml b/dts/Bindings/pinctrl/socionext,uniphier-pinctrl.yaml index 502480a19f..880da721a9 100644 --- a/dts/Bindings/pinctrl/socionext,uniphier-pinctrl.yaml +++ b/dts/Bindings/pinctrl/socionext,uniphier-pinctrl.yaml @@ -1,4 +1,5 @@ # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause + %YAML 1.2 --- $id: http://devicetree.org/schemas/pinctrl/socionext,uniphier-pinctrl.yaml# @@ -10,9 +11,6 @@ maintainers: - Masahiro Yamada <yamada.masahiro@socionext.com> properties: - $nodename: - pattern: "pinctrl" - compatible: enum: - socionext,uniphier-ld4-pinctrl @@ -24,21 +22,63 @@ properties: - socionext,uniphier-ld11-pinctrl - socionext,uniphier-ld20-pinctrl - socionext,uniphier-pxs3-pinctrl + - socionext,uniphier-nx1-pinctrl + +additionalProperties: + type: object + + allOf: + - $ref: pincfg-node.yaml# + - $ref: pinmux-node.yaml# + + properties: + function: true + groups: true + pins: true + bias-pull-up: true + bias-pull-down: true + bias-pull-pin-default: true + drive-strength: true + + additionalProperties: + type: object + + allOf: + - $ref: pincfg-node.yaml# + - $ref: pinmux-node.yaml# + + properties: + function: true + groups: true + pins: true + bias-pull-up: true + bias-pull-down: true + bias-pull-pin-default: true + drive-strength: true + + unevaluatedProperties: false + +allOf: + - $ref: pinctrl.yaml# required: - compatible -additionalProperties: false - examples: - | // The UniPhier pinctrl should be a subnode of a "syscon" compatible node. - soc-glue@5f800000 { - compatible = "socionext,uniphier-pro4-soc-glue", "simple-mfd", "syscon"; - reg = <0x5f800000 0x2000>; + pinctrl { + compatible = "socionext,uniphier-ld20-pinctrl"; + + pinctrl_ether_rgmii: ether-rgmii { + groups = "ether_rgmii"; + function = "ether_rgmii"; - pinctrl: pinctrl { - compatible = "socionext,uniphier-pro4-pinctrl"; + tx { + pins = "RGMII_TXCLK", "RGMII_TXD0", "RGMII_TXD1", + "RGMII_TXD2", "RGMII_TXD3", "RGMII_TXCTL"; + drive-strength = <9>; + }; }; }; diff --git a/dts/Bindings/pinctrl/sprd,pinctrl.txt b/dts/Bindings/pinctrl/sprd,pinctrl.txt index b1cea7a3a0..779b8ef0f6 100644 --- a/dts/Bindings/pinctrl/sprd,pinctrl.txt +++ b/dts/Bindings/pinctrl/sprd,pinctrl.txt @@ -8,7 +8,7 @@ to configure for some global common configuration, such as domain pad driving level, system control select and so on ("domain pad driving level": One pin can output 3.0v or 1.8v, depending on the related domain pad driving selection, if the related domain pad -slect 3.0v, then the pin can output 3.0v. "system control" is used +select 3.0v, then the pin can output 3.0v. "system control" is used to choose one function (like: UART0) for which system, since we have several systems (AP/CP/CM4) on one SoC.). diff --git a/dts/Bindings/pinctrl/st,stm32-pinctrl.yaml b/dts/Bindings/pinctrl/st,stm32-pinctrl.yaml index dfee6d38a7..e1eb45a9ed 100644 --- a/dts/Bindings/pinctrl/st,stm32-pinctrl.yaml +++ b/dts/Bindings/pinctrl/st,stm32-pinctrl.yaml @@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: STM32 GPIO and Pin Mux/Config controller maintainers: - - Alexandre TORGUE <alexandre.torgue@st.com> + - Alexandre TORGUE <alexandre.torgue@foss.st.com> description: | STMicroelectronics's STM32 MCUs intregrate a GPIO and Pin mux/config hardware @@ -27,6 +27,8 @@ properties: - st,stm32mp135-pinctrl - st,stm32mp157-pinctrl - st,stm32mp157-z-pinctrl + - st,stm32mp257-pinctrl + - st,stm32mp257-z-pinctrl '#address-cells': const: 1 @@ -34,41 +36,50 @@ properties: const: 1 ranges: true - pins-are-numbered: true + pins-are-numbered: + $ref: /schemas/types.yaml#/definitions/flag + deprecated: true hwlocks: true interrupts: maxItems: 1 st,syscfg: - description: Should be phandle/offset/mask - - Phandle to the syscon node which includes IRQ mux selection. - - The offset of the IRQ mux selection register. - - The field mask of IRQ mux, needed if different of 0xf. - $ref: "/schemas/types.yaml#/definitions/phandle-array" + description: Phandle+args to the syscon node which includes IRQ mux selection. + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - minItems: 2 + items: + - description: syscon node which includes IRQ mux selection + - description: The offset of the IRQ mux selection register + - description: The field mask of IRQ mux, needed if different of 0xf st,package: description: Indicates the SOC package used. More details in include/dt-bindings/pinctrl/stm32-pinfunc.h $ref: /schemas/types.yaml#/definitions/uint32 - enum: [1, 2, 4, 8] + enum: [0x1, 0x2, 0x4, 0x8, 0x100, 0x400, 0x800] patternProperties: '^gpio@[0-9a-f]*$': type: object + additionalProperties: false properties: gpio-controller: true '#gpio-cells': const: 2 + interrupt-controller: true + '#interrupt-cells': + const: 2 reg: maxItems: 1 clocks: maxItems: 1 - reset: - minItems: 1 + resets: maxItems: 1 + gpio-line-names: true gpio-ranges: minItems: 1 maxItems: 16 @@ -81,7 +92,7 @@ patternProperties: st,bank-name: description: Should be a name string for this bank as specified in the datasheet. - $ref: "/schemas/types.yaml#/definitions/string" + $ref: /schemas/types.yaml#/definitions/string enum: - GPIOA - GPIOB @@ -100,10 +111,16 @@ patternProperties: description: Should correspond to the EXTI IOport selection (EXTI line used to select GPIOs as interrupts). - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 11 + patternProperties: + "^(.+-hog(-[0-9]+)?)$": + type: object + required: + - gpio-hog + required: - gpio-controller - '#gpio-cells' @@ -113,9 +130,12 @@ patternProperties: '-[0-9]*$': type: object + additionalProperties: false + patternProperties: '^pins': type: object + additionalProperties: false description: | A pinctrl node should contain at least one subnode representing the pinctrl group available on the machine. Each subnode will list the @@ -123,7 +143,7 @@ patternProperties: configuration, pullups, drive, output high/low and output speed. properties: pinmux: - $ref: "/schemas/types.yaml#/definitions/uint32-array" + $ref: /schemas/types.yaml#/definitions/uint32-array description: | Integer array, represents gpio pin number and mux setting. Supported pin number and mux varies for different SoCs, and are @@ -183,12 +203,14 @@ patternProperties: required: - pinmux +allOf: + - $ref: pinctrl.yaml# + required: - compatible - '#address-cells' - '#size-cells' - ranges - - pins-are-numbered additionalProperties: false @@ -202,7 +224,6 @@ examples: #size-cells = <1>; compatible = "st,stm32f429-pinctrl"; ranges = <0 0x40020000 0x3000>; - pins-are-numbered; gpioa: gpio@0 { gpio-controller; @@ -220,7 +241,6 @@ examples: #size-cells = <1>; compatible = "st,stm32f429-pinctrl"; ranges = <0 0x50020000 0x3000>; - pins-are-numbered; gpiob: gpio@1000 { gpio-controller; diff --git a/dts/Bindings/pinctrl/starfive,jh7100-pinctrl.yaml b/dts/Bindings/pinctrl/starfive,jh7100-pinctrl.yaml new file mode 100644 index 0000000000..f3258f2fd3 --- /dev/null +++ b/dts/Bindings/pinctrl/starfive,jh7100-pinctrl.yaml @@ -0,0 +1,307 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/starfive,jh7100-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive JH7100 Pin Controller + +description: | + Bindings for the JH7100 RISC-V SoC from StarFive Ltd. + + Out of the SoC's many pins only the ones named PAD_GPIO[0] to PAD_GPIO[63] + and PAD_FUNC_SHARE[0] to PAD_FUNC_SHARE[141] can be multiplexed and have + configurable bias, drive strength, schmitt trigger etc. The SoC has an + interesting 2-layered approach to pin muxing best illustrated by the diagram + below. + + Signal group 0, 1, ... or 6 + ___|___ + | | + LCD output -----------------| | + CMOS Camera interface ------| |--- PAD_GPIO[0] + Ethernet PHY interface -----| MUX |--- PAD_GPIO[1] + ... | | ... + | |--- PAD_GPIO[63] + -------- GPIO0 ------------| | + | -------|-- GPIO1 --------| |--- PAD_FUNC_SHARE[0] + | | | | | |--- PAD_FUNC_SHARE[1] + | | | | ... | | ... + | | | | | |--- PAD_FUNC_SHARE[141] + | | -----|---|-- GPIO63 ---| | + | | | | | | ------- + UART0 UART1 -- + + + The big MUX in the diagram only has 7 different ways of mapping peripherals + on the left to pins on the right. StarFive calls the 7 configurations "signal + groups". + However some peripherals have their I/O go through the 64 "GPIOs". The + diagram only shows UART0 and UART1, but this also includes a number of other + UARTs, I2Cs, SPIs, PWMs etc. All these peripherals are connected to all 64 + GPIOs such that any GPIO can be set up to be controlled by any of the + peripherals. + Note that signal group 0 doesn't map any of the GPIOs to pins, and only + signal group 1 maps the GPIOs to the pins named PAD_GPIO[0] to PAD_GPIO[63]. + +maintainers: + - Emil Renner Berthing <kernel@esmil.dk> + - Drew Fustini <drew@beagleboard.org> + +properties: + compatible: + const: starfive,jh7100-pinctrl + + reg: + minItems: 2 + maxItems: 2 + + reg-names: + items: + - const: gpio + - const: padctl + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + gpio-controller: true + + "#gpio-cells": + const: 2 + + interrupts: + maxItems: 1 + description: The GPIO parent interrupt. + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + starfive,signal-group: + description: | + Select one of the 7 signal groups. If this property is not set it + defaults to the configuration already chosen by the earlier boot stages. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3, 4, 5, 6] + +required: + - compatible + - reg + - reg-names + - clocks + - gpio-controller + - "#gpio-cells" + - interrupts + - interrupt-controller + - "#interrupt-cells" + +patternProperties: + '-[0-9]+$': + type: object + patternProperties: + '-pins$': + type: object + description: | + A pinctrl node should contain at least one subnode representing the + pinctrl groups available on the machine. Each subnode will list the + pins it needs, and how they should be configured, with regard to + muxer configuration, bias, input enable/disable, input schmitt + trigger enable/disable, slew-rate and drive strength. + $ref: /schemas/pinctrl/pincfg-node.yaml + + properties: + pins: + description: | + The list of pin identifiers that properties in the node apply to. + This should be set using either the PAD_GPIO or PAD_FUNC_SHARE + macros. + Either this or "pinmux" has to be specified, but not both. + $ref: /schemas/pinctrl/pinmux-node.yaml#/properties/pins + + pinmux: + description: | + The list of GPIOs and their mux settings that properties in the + node apply to. This should be set using the GPIOMUX macro. + Either this or "pins" has to be specified, but not both. + $ref: /schemas/pinctrl/pinmux-node.yaml#/properties/pinmux + + bias-disable: true + + bias-pull-up: + type: boolean + + bias-pull-down: + type: boolean + + drive-strength: + enum: [ 14, 21, 28, 35, 42, 49, 56, 63 ] + + input-enable: true + + input-disable: true + + input-schmitt-enable: true + + input-schmitt-disable: true + + slew-rate: + maximum: 7 + + starfive,strong-pull-up: + description: enable strong pull-up. + type: boolean + + additionalProperties: false + + additionalProperties: false + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/starfive-jh7100.h> + #include <dt-bindings/reset/starfive-jh7100.h> + #include <dt-bindings/pinctrl/pinctrl-starfive-jh7100.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pinctrl@11910000 { + compatible = "starfive,jh7100-pinctrl"; + reg = <0x0 0x11910000 0x0 0x10000>, + <0x0 0x11858000 0x0 0x1000>; + reg-names = "gpio", "padctl"; + clocks = <&clkgen JH7100_CLK_GPIO_APB>; + resets = <&clkgen JH7100_RSTN_GPIO_APB>; + interrupts = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + starfive,signal-group = <6>; + + gmac_pins_default: gmac-0 { + gtxclk-pins { + pins = <PAD_FUNC_SHARE(115)>; + bias-pull-up; + drive-strength = <35>; + input-enable; + input-schmitt-enable; + slew-rate = <0>; + }; + miitxclk-pins { + pins = <PAD_FUNC_SHARE(116)>; + bias-pull-up; + drive-strength = <14>; + input-enable; + input-schmitt-disable; + slew-rate = <0>; + }; + tx-pins { + pins = <PAD_FUNC_SHARE(117)>, + <PAD_FUNC_SHARE(119)>, + <PAD_FUNC_SHARE(120)>, + <PAD_FUNC_SHARE(121)>, + <PAD_FUNC_SHARE(122)>, + <PAD_FUNC_SHARE(123)>, + <PAD_FUNC_SHARE(124)>, + <PAD_FUNC_SHARE(125)>, + <PAD_FUNC_SHARE(126)>; + bias-disable; + drive-strength = <35>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + rxclk-pins { + pins = <PAD_FUNC_SHARE(127)>; + bias-pull-up; + drive-strength = <14>; + input-enable; + input-schmitt-disable; + slew-rate = <6>; + }; + rxer-pins { + pins = <PAD_FUNC_SHARE(129)>; + bias-pull-up; + drive-strength = <14>; + input-enable; + input-schmitt-disable; + slew-rate = <0>; + }; + rx-pins { + pins = <PAD_FUNC_SHARE(128)>, + <PAD_FUNC_SHARE(130)>, + <PAD_FUNC_SHARE(131)>, + <PAD_FUNC_SHARE(132)>, + <PAD_FUNC_SHARE(133)>, + <PAD_FUNC_SHARE(134)>, + <PAD_FUNC_SHARE(135)>, + <PAD_FUNC_SHARE(136)>, + <PAD_FUNC_SHARE(137)>, + <PAD_FUNC_SHARE(138)>, + <PAD_FUNC_SHARE(139)>, + <PAD_FUNC_SHARE(140)>, + <PAD_FUNC_SHARE(141)>; + bias-pull-up; + drive-strength = <14>; + input-enable; + input-schmitt-enable; + slew-rate = <0>; + }; + }; + + i2c0_pins_default: i2c0-0 { + i2c-pins { + pinmux = <GPIOMUX(62, GPO_LOW, + GPO_I2C0_PAD_SCK_OEN, + GPI_I2C0_PAD_SCK_IN)>, + <GPIOMUX(61, GPO_LOW, + GPO_I2C0_PAD_SDA_OEN, + GPI_I2C0_PAD_SDA_IN)>; + bias-disable; /* external pull-up */ + input-enable; + input-schmitt-enable; + }; + }; + + uart3_pins_default: uart3-0 { + rx-pins { + pinmux = <GPIOMUX(13, GPO_LOW, GPO_DISABLE, + GPI_UART3_PAD_SIN)>; + bias-pull-up; + input-enable; + input-schmitt-enable; + }; + tx-pins { + pinmux = <GPIOMUX(14, GPO_UART3_PAD_SOUT, + GPO_ENABLE, GPI_NONE)>; + bias-disable; + input-disable; + input-schmitt-disable; + }; + }; + }; + + gmac { + pinctrl-0 = <&gmac_pins_default>; + pinctrl-names = "default"; + }; + + i2c { + pinctrl-0 = <&i2c0_pins_default>; + pinctrl-names = "default"; + }; + + uart3 { + pinctrl-0 = <&uart3_pins_default>; + pinctrl-names = "default"; + }; + }; + +... diff --git a/dts/Bindings/pinctrl/starfive,jh7110-aon-pinctrl.yaml b/dts/Bindings/pinctrl/starfive,jh7110-aon-pinctrl.yaml new file mode 100644 index 0000000000..b470901f5f --- /dev/null +++ b/dts/Bindings/pinctrl/starfive,jh7110-aon-pinctrl.yaml @@ -0,0 +1,124 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/starfive,jh7110-aon-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive JH7110 AON Pin Controller + +description: | + Bindings for the JH7110 RISC-V SoC from StarFive Technology Ltd. + + Out of the SoC's many pins only the ones named PAD_RGPIO0 to PAD_RGPIO3 + can be multiplexed and have configurable bias, drive strength, + schmitt trigger etc. + Some peripherals such as PWM have their I/O go through the 4 "GPIOs". + +maintainers: + - Jianlong Huang <jianlong.huang@starfivetech.com> + +properties: + compatible: + const: starfive,jh7110-aon-pinctrl + + reg: + maxItems: 1 + + resets: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + + gpio-controller: true + + '#gpio-cells': + const: 2 + +patternProperties: + '-[0-9]+$': + type: object + additionalProperties: false + patternProperties: + '-pins$': + type: object + description: | + A pinctrl node should contain at least one subnode representing the + pinctrl groups available on the machine. Each subnode will list the + pins it needs, and how they should be configured, with regard to + muxer configuration, bias, input enable/disable, input schmitt + trigger enable/disable, slew-rate and drive strength. + allOf: + - $ref: /schemas/pinctrl/pincfg-node.yaml + - $ref: /schemas/pinctrl/pinmux-node.yaml + additionalProperties: false + + properties: + pinmux: + description: | + The list of GPIOs and their mux settings that properties in the + node apply to. This should be set using the GPIOMUX macro. + + bias-disable: true + + bias-pull-up: + type: boolean + + bias-pull-down: + type: boolean + + drive-strength: + enum: [ 2, 4, 8, 12 ] + + input-enable: true + + input-disable: true + + input-schmitt-enable: true + + input-schmitt-disable: true + + slew-rate: + maximum: 1 + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - '#interrupt-cells' + - gpio-controller + - '#gpio-cells' + +additionalProperties: false + +examples: + - | + pinctrl@17020000 { + compatible = "starfive,jh7110-aon-pinctrl"; + reg = <0x17020000 0x10000>; + resets = <&aoncrg 2>; + interrupts = <85>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + + pwm-0 { + pwm-pins { + pinmux = <0xff030802>; + bias-disable; + drive-strength = <12>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + }; + }; + +... diff --git a/dts/Bindings/pinctrl/starfive,jh7110-sys-pinctrl.yaml b/dts/Bindings/pinctrl/starfive,jh7110-sys-pinctrl.yaml new file mode 100644 index 0000000000..222b9e240f --- /dev/null +++ b/dts/Bindings/pinctrl/starfive,jh7110-sys-pinctrl.yaml @@ -0,0 +1,142 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/starfive,jh7110-sys-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive JH7110 SYS Pin Controller + +description: | + Bindings for the JH7110 RISC-V SoC from StarFive Technology Ltd. + + Out of the SoC's many pins only the ones named PAD_GPIO0 to PAD_GPIO63 + can be multiplexed and have configurable bias, drive strength, + schmitt trigger etc. + Some peripherals have their I/O go through the 64 "GPIOs". This also + includes a number of other UARTs, I2Cs, SPIs, PWMs etc. + All these peripherals are connected to all 64 GPIOs such that + any GPIO can be set up to be controlled by any of the peripherals. + +maintainers: + - Jianlong Huang <jianlong.huang@starfivetech.com> + +properties: + compatible: + const: starfive,jh7110-sys-pinctrl + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + + gpio-controller: true + + '#gpio-cells': + const: 2 + +patternProperties: + '-[0-9]+$': + type: object + additionalProperties: false + patternProperties: + '-pins$': + type: object + description: | + A pinctrl node should contain at least one subnode representing the + pinctrl groups available on the machine. Each subnode will list the + pins it needs, and how they should be configured, with regard to + muxer configuration, bias, input enable/disable, input schmitt + trigger enable/disable, slew-rate and drive strength. + allOf: + - $ref: /schemas/pinctrl/pincfg-node.yaml + - $ref: /schemas/pinctrl/pinmux-node.yaml + additionalProperties: false + + properties: + pinmux: + description: | + The list of GPIOs and their mux settings that properties in the + node apply to. This should be set using the GPIOMUX or PINMUX + macros. + + bias-disable: true + + bias-pull-up: + type: boolean + + bias-pull-down: + type: boolean + + drive-strength: + enum: [ 2, 4, 8, 12 ] + + input-enable: true + + input-disable: true + + input-schmitt-enable: true + + input-schmitt-disable: true + + slew-rate: + maximum: 1 + +required: + - compatible + - reg + - clocks + - interrupts + - interrupt-controller + - '#interrupt-cells' + - gpio-controller + - '#gpio-cells' + +additionalProperties: false + +examples: + - | + pinctrl@13040000 { + compatible = "starfive,jh7110-sys-pinctrl"; + reg = <0x13040000 0x10000>; + clocks = <&syscrg 112>; + resets = <&syscrg 2>; + interrupts = <86>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + + uart0-0 { + tx-pins { + pinmux = <0xff140005>; + bias-disable; + drive-strength = <12>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + + rx-pins { + pinmux = <0x0E000406>; + bias-pull-up; + drive-strength = <2>; + input-enable; + input-schmitt-enable; + slew-rate = <0>; + }; + }; + }; + +... diff --git a/dts/Bindings/pinctrl/sunplus,sp7021-pinctrl.yaml b/dts/Bindings/pinctrl/sunplus,sp7021-pinctrl.yaml new file mode 100644 index 0000000000..94b868c7ce --- /dev/null +++ b/dts/Bindings/pinctrl/sunplus,sp7021-pinctrl.yaml @@ -0,0 +1,377 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) Sunplus Co., Ltd. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/sunplus,sp7021-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sunplus SP7021 Pin Controller + +maintainers: + - Dvorkin Dmitry <dvorkin@tibbo.com> + - Wells Lu <wellslutw@gmail.com> + +description: | + The Sunplus SP7021 pin controller is used to control SoC pins. Please + refer to pinctrl-bindings.txt in this directory for details of the common + pinctrl bindings used by client devices. + + SP7021 has 99 digital GPIO pins which are numbered from GPIO 0 to 98. All + are multiplexed with some special function pins. SP7021 has 3 types of + special function pins: + + (1) function-group pins: + Ex 1 (SPI-NOR flash): + If control-field SPI_FLASH_SEL is set to 1, GPIO 83, 84, 86 and 87 + will be pins of SPI-NOR flash. If it is set to 2, GPIO 76, 78, 79 + and 81 will be pins of SPI-NOR flash. + + Ex 2 (UART_0): + If control-bit UA0_SEL is set to 1, GPIO 88 and 89 will be TX and + RX pins of UART_0 (UART channel 0). + + Ex 3 (eMMC): + If control-bit EMMC_SEL is set to 1, GPIO 72, 73, 74, 75, 76, 77, + 78, 79, 80, 81 will be pins of an eMMC device. + + Properties "function" and "groups" are used to select function-group + pins. + + (2) fully pin-mux (like phone exchange mux) pins: + GPIO 8 to 71 are 'fully pin-mux' pins. Any pins of peripherals of + SP7021 (ex: UART_1, UART_2, UART_3, UART_4, I2C_0, I2C_1, and etc.) + can be routed to any pins of fully pin-mux pins. + + Ex 1 (UART channel 1): + If control-field UA1_TX_SEL is set to 3, TX pin of UART_1 will be + routed to GPIO 10 (3 - 1 + 8 = 10). + If control-field UA1_RX_SEL is set to 4, RX pin of UART_1 will be + routed to GPIO 11 (4 - 1 + 8 = 11). + If control-field UA1_RTS_SEL is set to 5, RTS pin of UART_1 will + be routed to GPIO 12 (5 - 1 + 8 = 12). + If control-field UA1_CTS_SEL is set to 6, CTS pin of UART_1 will + be routed to GPIO 13 (6 - 1 + 8 = 13). + + Ex 2 (I2C channel 0): + If control-field I2C0_CLK_SEL is set to 20, CLK pin of I2C_0 will + be routed to GPIO 27 (20 - 1 + 8 = 27). + If control-field I2C0_DATA_SEL is set to 21, DATA pin of I2C_0 + will be routed to GPIO 28 (21 - 1 + 9 = 28). + + Totally, SP7021 has 120 peripheral pins. The peripheral pins can be + routed to any of 64 'fully pin-mux' pins. + + (3) I/O processor pins + SP7021 has a built-in I/O processor. + Any GPIO pins (GPIO 0 to 98) can be set to pins of I/O processor. + + Vendor property "sunplus,pins" is used to select "fully pin-mux" pins, + "I/O processor pins" and "digital GPIO" pins. + + The device node of pin controller of Sunplus SP7021 has following + properties. + +properties: + compatible: + const: sunplus,sp7021-pctl + + gpio-controller: true + + '#gpio-cells': + const: 2 + + reg: + items: + - description: the MOON2 registers + - description: the GPIOXT registers + - description: the FIRST registers + - description: the MOON1 registers + + reg-names: + items: + - const: moon2 + - const: gpioxt + - const: first + - const: moon1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + +patternProperties: + '-pins$': + type: object + description: | + A pinctrl node should contain at least one subnodes representing the + pins or function-pins group available on the machine. Each subnode + will list the pins it needs, and how they should be configured. + + Pinctrl node's client devices use subnodes for desired pin + configuration. Client device subnodes use below standard properties. + $ref: pinmux-node.yaml# + + properties: + sunplus,pins: + description: | + Define 'sunplus,pins' which are used by pinctrl node's client + device. + + It consists of one or more integers which represents the config + setting for corresponding pin. Each integer defines a individual + pin in which: + + Bit 32~24: defines GPIO number. Its range is 0 ~ 98. + Bit 23~16: defines types: (1) fully pin-mux pins + (2) IO processor pins + (3) digital GPIO pins + Bit 15~8: defines pins of peripherals (which are defined in + 'include/dt-binging/pinctrl/sppctl.h'). + Bit 7~0: defines types or initial-state of digital GPIO pins. + + Please use macro SPPCTL_IOPAD to define the integers for pins. + + $ref: /schemas/types.yaml#/definitions/uint32-array + + function: + description: | + Define pin-function which is used by pinctrl node's client device. + The name should be one of string in the following enumeration. + $ref: /schemas/types.yaml#/definitions/string + enum: [ SPI_FLASH, SPI_FLASH_4BIT, SPI_NAND, CARD0_EMMC, SD_CARD, + UA0, FPGA_IFX, HDMI_TX, LCDIF, USB0_OTG, USB1_OTG ] + + groups: + description: | + Define pin-group in a specified pin-function. + The name should be one of string in the following enumeration. + $ref: /schemas/types.yaml#/definitions/string + enum: [ SPI_FLASH1, SPI_FLASH2, SPI_FLASH_4BIT1, SPI_FLASH_4BIT2, + SPI_NAND, CARD0_EMMC, SD_CARD, UA0, FPGA_IFX, HDMI_TX1, + HDMI_TX2, HDMI_TX3, LCDIF, USB0_OTG, USB1_OTG ] + + sunplus,zerofunc: + description: | + This is a vendor specific property. It is used to disable pins + which are not used by pinctrl node's client device. + Some pins may be enabled by boot-loader. We can use this + property to disable them. + $ref: /schemas/types.yaml#/definitions/uint32-array + + additionalProperties: false + + allOf: + - if: + properties: + function: + enum: + - SPI_FLASH + then: + properties: + groups: + enum: + - SPI_FLASH1 + - SPI_FLASH2 + - if: + properties: + function: + enum: + - SPI_FLASH_4BIT + then: + properties: + groups: + enum: + - SPI_FLASH_4BIT1 + - SPI_FLASH_4BIT2 + - if: + properties: + function: + enum: + - SPI_NAND + then: + properties: + groups: + enum: + - SPI_NAND + - if: + properties: + function: + enum: + - CARD0_EMMC + then: + properties: + groups: + enum: + - CARD0_EMMC + - if: + properties: + function: + enum: + - SD_CARD + then: + properties: + groups: + enum: + - SD_CARD + - if: + properties: + function: + enum: + - UA0 + then: + properties: + groups: + enum: + - UA0 + - if: + properties: + function: + enum: + - FPGA_IFX + then: + properties: + groups: + enum: + - FPGA_IFX + - if: + properties: + function: + enum: + - HDMI_TX + then: + properties: + groups: + enum: + - HDMI_TX1 + - HDMI_TX2 + - HDMI_TX3 + - if: + properties: + function: + enum: + - LCDIF + then: + properties: + groups: + enum: + - LCDIF + - if: + properties: + function: + enum: + - USB0_OTG + then: + properties: + groups: + enum: + - USB0_OTG + - if: + properties: + function: + enum: + - USB1_OTG + then: + properties: + groups: + enum: + - USB1_OTG + +required: + - compatible + - reg + - reg-names + - "#gpio-cells" + - gpio-controller + - clocks + - resets + +additionalProperties: false + +allOf: + - $ref: pinctrl.yaml# + +examples: + - | + #include <dt-bindings/pinctrl/sppctl-sp7021.h> + + pinctrl@9c000100 { + compatible = "sunplus,sp7021-pctl"; + reg = <0x9c000100 0x100>, <0x9c000300 0x100>, + <0x9c0032e4 0x1c>, <0x9c000080 0x20>; + reg-names = "moon2", "gpioxt", "first", "moon1"; + gpio-controller; + #gpio-cells = <2>; + clocks = <&clkc 0x83>; + resets = <&rstc 0x73>; + + uart0-pins { + function = "UA0"; + groups = "UA0"; + }; + + spinand0-pins { + function = "SPI_NAND"; + groups = "SPI_NAND"; + }; + + uart1-pins { + sunplus,pins = < + SPPCTL_IOPAD(11, SPPCTL_PCTL_G_PMUX, MUXF_UA1_TX, 0) + SPPCTL_IOPAD(10, SPPCTL_PCTL_G_PMUX, MUXF_UA1_RX, 0) + >; + }; + + uart2-pins { + sunplus,pins = < + SPPCTL_IOPAD(20, SPPCTL_PCTL_G_PMUX, MUXF_UA1_TX, 0) + SPPCTL_IOPAD(21, SPPCTL_PCTL_G_PMUX, MUXF_UA1_RX, 0) + SPPCTL_IOPAD(22, SPPCTL_PCTL_G_PMUX, MUXF_UA1_RTS, 0) + SPPCTL_IOPAD(23, SPPCTL_PCTL_G_PMUX, MUXF_UA1_CTS, 0) + >; + }; + + emmc-pins { + function = "CARD0_EMMC"; + groups = "CARD0_EMMC"; + }; + + sdcard-pins { + function = "SD_CARD"; + groups = "SD_CARD"; + sunplus,pins = < SPPCTL_IOPAD(91, SPPCTL_PCTL_G_GPIO, 0, 0) >; + }; + + hdmi_A_tx1-pins { + function = "HDMI_TX"; + groups = "HDMI_TX1"; + }; + hdmi_A_tx2-pins { + function = "HDMI_TX"; + groups = "HDMI_TX2"; + }; + hdmi_A_tx3-pins { + function = "HDMI_TX"; + groups = "HDMI_TX3"; + }; + + ethernet-pins { + sunplus,pins = < + SPPCTL_IOPAD(49,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_CLK_OUT,0) + SPPCTL_IOPAD(44,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_MAC_SMI_MDC,0) + SPPCTL_IOPAD(43,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_MAC_SMI_MDIO,0) + SPPCTL_IOPAD(52,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXEN,0) + SPPCTL_IOPAD(50,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXD0,0) + SPPCTL_IOPAD(51,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXD1,0) + SPPCTL_IOPAD(46,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_CRSDV,0) + SPPCTL_IOPAD(47,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_RXD0,0) + SPPCTL_IOPAD(48,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_RXD1,0) + >; + sunplus,zerofunc = < + MUXF_L2SW_LED_FLASH0 + MUXF_L2SW_LED_ON0 + MUXF_L2SW_P0_MAC_RMII_RXER + >; + }; + }; +... diff --git a/dts/Bindings/pinctrl/ti,omap-pinctrl.txt b/dts/Bindings/pinctrl/ti,omap-pinctrl.txt deleted file mode 100644 index 88c80273da..0000000000 --- a/dts/Bindings/pinctrl/ti,omap-pinctrl.txt +++ /dev/null @@ -1,13 +0,0 @@ -OMAP Pinctrl definitions - -Required properties: -- compatible : Should be one of: - "ti,omap2420-padconf" - OMAP2420 compatible pinctrl - "ti,omap2430-padconf" - OMAP2430 compatible pinctrl - "ti,omap3-padconf" - OMAP3 compatible pinctrl - "ti,omap4-padconf" - OMAP4 compatible pinctrl - "ti,omap5-padconf" - OMAP5 compatible pinctrl - "ti,dra7-padconf" - DRA7 compatible pinctrl - "ti,am437-padconf" - AM437x compatible pinctrl - -See Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt for further details. diff --git a/dts/Bindings/pinctrl/toshiba,visconti-pinctrl.yaml b/dts/Bindings/pinctrl/toshiba,visconti-pinctrl.yaml index 9f1dab0c24..19d47fd414 100644 --- a/dts/Bindings/pinctrl/toshiba,visconti-pinctrl.yaml +++ b/dts/Bindings/pinctrl/toshiba,visconti-pinctrl.yaml @@ -20,6 +20,9 @@ properties: reg: maxItems: 1 +allOf: + - $ref: pinctrl.yaml# + required: - compatible - reg @@ -32,13 +35,14 @@ patternProperties: pinctrl groups available on the machine. Each subnode will list the pins it needs, and how they should be configured, with regard to muxer configuration, pullups, drive strength. - $ref: "pinmux-node.yaml" + $ref: pinmux-node.yaml + additionalProperties: false properties: function: description: Function to mux. - $ref: "/schemas/types.yaml#/definitions/string" + $ref: /schemas/types.yaml#/definitions/string enum: [i2c0, i2c1, i2c2, i2c3, i2c4, i2c5, i2c6, i2c7, i2c8, spi0, spi1, spi2, spi3, spi4, spi5, spi6, uart0, uart1, uart2, uart3, pwm, pcmif_out, pcmif_in] @@ -46,7 +50,7 @@ patternProperties: groups: description: Name of the pin group to use for the functions. - $ref: "/schemas/types.yaml#/definitions/string" + $ref: /schemas/types.yaml#/definitions/string enum: [i2c0_grp, i2c1_grp, i2c2_grp, i2c3_grp, i2c4_grp, i2c5_grp, i2c6_grp, i2c7_grp, i2c8_grp, spi0_grp, spi0_cs0_grp, spi0_cs1_grp, spi0_cs2_grp, @@ -80,7 +84,7 @@ examples: #address-cells = <2>; #size-cells = <2>; - pmux: pmux@24190000 { + pmux: pinmux@24190000 { compatible = "toshiba,tmpv7708-pinctrl"; reg = <0 0x24190000 0 0x10000>; diff --git a/dts/Bindings/pinctrl/xlnx,zynq-pinctrl.yaml b/dts/Bindings/pinctrl/xlnx,zynq-pinctrl.yaml index ac97dbf699..d2676f92ef 100644 --- a/dts/Bindings/pinctrl/xlnx,zynq-pinctrl.yaml +++ b/dts/Bindings/pinctrl/xlnx,zynq-pinctrl.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Xilinx Zynq Pinctrl maintainers: - - Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com> + - Sai Krishna Potthuri <sai.krishna.potthuri@amd.com> description: | Please refer to pinctrl-bindings.txt in this directory for details of the @@ -39,7 +39,7 @@ properties: phandle to the SLCR. patternProperties: - '^(.*-)?(default|gpio)$': + '^(.*-)?(default|gpio-grp)$': type: object patternProperties: '^mux': @@ -167,6 +167,9 @@ patternProperties: additionalProperties: false +allOf: + - $ref: pinctrl.yaml# + required: - compatible - reg diff --git a/dts/Bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml b/dts/Bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml index 8ef0d07d35..f13d315b5d 100644 --- a/dts/Bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml +++ b/dts/Bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml @@ -7,8 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Xilinx ZynqMP Pinctrl maintainers: - - Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com> - - Rajan Vaja <rajan.vaja@xilinx.com> + - Sai Krishna Potthuri <sai.krishna.potthuri@amd.com> description: | Please refer to pinctrl-bindings.txt in this directory for details of the @@ -32,7 +31,7 @@ properties: const: xlnx,zynqmp-pinctrl patternProperties: - '^(.*-)?(default|gpio)$': + '^(.*-)?(default|gpio-grp)$': type: object patternProperties: '^mux': @@ -274,6 +273,10 @@ patternProperties: slew-rate: enum: [0, 1] + output-enable: + description: + This will internally disable the tri-state for MIO pins. + drive-strength: description: Selects the drive strength for MIO pins, in mA. @@ -290,6 +293,9 @@ patternProperties: additionalProperties: false +allOf: + - $ref: pinctrl.yaml# + required: - compatible |